Merge tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "The big change in this round is that we're finally in a position where
  we can sanely remove the old drivers/ide/ code, as libata covers
  everything we need by now.

  This is exciting for two reasons:

   1) we delete a lot of legacy code that doesn't really meet the
      standards we have today, and

   2) it enables us to clean up various bits in the block layer that
      exist only because of the old IDE code.

  Outside of that, just a few minor fixes here, fixups for warnings,
  etc"

* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
  ata: rb532_cf: remove redundant codes
  ide: remove the legacy ide driver
  m68k: use libata instead of the legacy ide driver
  ARM: disable CONFIG_IDE in pxa_defconfig
  ARM: disable CONFIG_IDE in footbridge_defconfig
  alpha: use libata instead of the legacy ide driver
  pata_cypress: add a module option to disable BM-DMA
  ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  ata: include: libata: Move fields commonly over-written to separate MACRO
  ahci: Add support for Dell S140 and later controllers
  ata: ahci_sunxi: Disable DIPM
  ...

1 files changed, 0 insertions, 261 deletions

diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
deleted file mode 100644
index d680b3e3295f..000000000000
--- a/drivers/ide/ide-pm.c
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/ide.h>
-
-int generic_ide_suspend(struct device *dev, pm_message_t mesg)
-{
-	ide_drive_t *drive = to_ide_device(dev);
-	ide_drive_t *pair = ide_get_pair_dev(drive);
-	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq;
-	struct ide_pm_state rqpm;
-	int ret;
-
-	if (ide_port_acpi(hwif)) {
-		/* call ACPI _GTM only once */
-		if ((drive->dn & 1) == 0 || pair == NULL)
-			ide_acpi_get_timing(hwif);
-	}
-
-	memset(&rqpm, 0, sizeof(rqpm));
-	rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
-	ide_req(rq)->type = ATA_PRIV_PM_SUSPEND;
-	ide_req(rq)->special = &rqpm;
-	rqpm.pm_step = IDE_PM_START_SUSPEND;
-	if (mesg.event == PM_EVENT_PRETHAW)
-		mesg.event = PM_EVENT_FREEZE;
-	rqpm.pm_state = mesg.event;
-
-	blk_execute_rq(NULL, rq, 0);
-	ret = scsi_req(rq)->result ? -EIO : 0;
-	blk_put_request(rq);
-
-	if (ret == 0 && ide_port_acpi(hwif)) {
-		/* call ACPI _PS3 only after both devices are suspended */
-		if ((drive->dn & 1) || pair == NULL)
-			ide_acpi_set_state(hwif, 0);
-	}
-
-	return ret;
-}
-
-static int ide_pm_execute_rq(struct request *rq)
-{
-	struct request_queue *q = rq->q;
-
-	if (unlikely(blk_queue_dying(q))) {
-		rq->rq_flags |= RQF_QUIET;
-		scsi_req(rq)->result = -ENXIO;
-		blk_mq_end_request(rq, BLK_STS_OK);
-		return -ENXIO;
-	}
-	blk_execute_rq(NULL, rq, true);
-
-	return scsi_req(rq)->result ? -EIO : 0;
-}
-
-int generic_ide_resume(struct device *dev)
-{
-	ide_drive_t *drive = to_ide_device(dev);
-	ide_drive_t *pair = ide_get_pair_dev(drive);
-	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq;
-	struct ide_pm_state rqpm;
-	int err;
-
-	blk_mq_start_stopped_hw_queues(drive->queue, true);
-
-	if (ide_port_acpi(hwif)) {
-		/* call ACPI _PS0 / _STM only once */
-		if ((drive->dn & 1) == 0 || pair == NULL) {
-			ide_acpi_set_state(hwif, 1);
-			ide_acpi_push_timing(hwif);
-		}
-
-		ide_acpi_exec_tfs(drive);
-	}
-
-	memset(&rqpm, 0, sizeof(rqpm));
-	rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_PM);
-	ide_req(rq)->type = ATA_PRIV_PM_RESUME;
-	ide_req(rq)->special = &rqpm;
-	rqpm.pm_step = IDE_PM_START_RESUME;
-	rqpm.pm_state = PM_EVENT_ON;
-
-	err = ide_pm_execute_rq(rq);
-	blk_put_request(rq);
-
-	if (err == 0 && dev->driver) {
-		struct ide_driver *drv = to_ide_driver(dev->driver);
-
-		if (drv->resume)
-			drv->resume(drive);
-	}
-
-	return err;
-}
-
-void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
-{
-	struct ide_pm_state *pm = ide_req(rq)->special;
-
-#ifdef DEBUG_PM
-	printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
-		drive->name, pm->pm_step);
-#endif
-	if (drive->media != ide_disk)
-		return;
-
-	switch (pm->pm_step) {
-	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
-		if (pm->pm_state == PM_EVENT_FREEZE)
-			pm->pm_step = IDE_PM_COMPLETED;
-		else
-			pm->pm_step = IDE_PM_STANDBY;
-		break;
-	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
-		pm->pm_step = IDE_PM_COMPLETED;
-		break;
-	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
-		pm->pm_step = IDE_PM_IDLE;
-		break;
-	case IDE_PM_IDLE:		/* Resume step 2 (idle)*/
-		pm->pm_step = IDE_PM_RESTORE_DMA;
-		break;
-	}
-}
-
-ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
-{
-	struct ide_pm_state *pm = ide_req(rq)->special;
-	struct ide_cmd cmd = { };
-
-	switch (pm->pm_step) {
-	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
-		if (drive->media != ide_disk)
-			break;
-		/* Not supported? Switch to next step now. */
-		if (ata_id_flush_enabled(drive->id) == 0 ||
-		    (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
-			ide_complete_power_step(drive, rq);
-			return ide_stopped;
-		}
-		if (ata_id_flush_ext_enabled(drive->id))
-			cmd.tf.command = ATA_CMD_FLUSH_EXT;
-		else
-			cmd.tf.command = ATA_CMD_FLUSH;
-		goto out_do_tf;
-	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
-		cmd.tf.command = ATA_CMD_STANDBYNOW1;
-		goto out_do_tf;
-	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
-		ide_set_max_pio(drive);
-		/*
-		 * skip IDE_PM_IDLE for ATAPI devices
-		 */
-		if (drive->media != ide_disk)
-			pm->pm_step = IDE_PM_RESTORE_DMA;
-		else
-			ide_complete_power_step(drive, rq);
-		return ide_stopped;
-	case IDE_PM_IDLE:		/* Resume step 2 (idle) */
-		cmd.tf.command = ATA_CMD_IDLEIMMEDIATE;
-		goto out_do_tf;
-	case IDE_PM_RESTORE_DMA:	/* Resume step 3 (restore DMA) */
-		/*
-		 * Right now, all we do is call ide_set_dma(drive),
-		 * we could be smarter and check for current xfer_speed
-		 * in struct drive etc...
-		 */
-		if (drive->hwif->dma_ops == NULL)
-			break;
-		/*
-		 * TODO: respect IDE_DFLAG_USING_DMA
-		 */
-		ide_set_dma(drive);
-		break;
-	}
-
-	pm->pm_step = IDE_PM_COMPLETED;
-
-	return ide_stopped;
-
-out_do_tf:
-	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
-	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
-	cmd.protocol = ATA_PROT_NODATA;
-
-	return do_rw_taskfile(drive, &cmd);
-}
-
-/**
- *	ide_complete_pm_rq - end the current Power Management request
- *	@drive: target drive
- *	@rq: request
- *
- *	This function cleans up the current PM request and stops the queue
- *	if necessary.
- */
-void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
-{
-	struct request_queue *q = drive->queue;
-	struct ide_pm_state *pm = ide_req(rq)->special;
-
-	ide_complete_power_step(drive, rq);
-	if (pm->pm_step != IDE_PM_COMPLETED)
-		return;
-
-#ifdef DEBUG_PM
-	printk("%s: completing PM request, %s\n", drive->name,
-	       (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND) ? "suspend" : "resume");
-#endif
-	if (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND)
-		blk_mq_stop_hw_queues(q);
-	else
-		drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
-
-	drive->hwif->rq = NULL;
-
-	blk_mq_end_request(rq, BLK_STS_OK);
-}
-
-void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
-{
-	struct ide_pm_state *pm = ide_req(rq)->special;
-
-	if (blk_rq_is_private(rq) &&
-	    ide_req(rq)->type == ATA_PRIV_PM_SUSPEND &&
-	    pm->pm_step == IDE_PM_START_SUSPEND)
-		/* Mark drive blocked when starting the suspend sequence. */
-		drive->dev_flags |= IDE_DFLAG_BLOCKED;
-	else if (blk_rq_is_private(rq) &&
-	         ide_req(rq)->type == ATA_PRIV_PM_RESUME &&
-		 pm->pm_step == IDE_PM_START_RESUME) {
-		/*
-		 * The first thing we do on wakeup is to wait for BSY bit to
-		 * go away (with a looong timeout) as a drive on this hwif may
-		 * just be POSTing itself.
-		 * We do that before even selecting as the "other" device on
-		 * the bus may be broken enough to walk on our toes at this
-		 * point.
-		 */
-		ide_hwif_t *hwif = drive->hwif;
-		const struct ide_tp_ops *tp_ops = hwif->tp_ops;
-		struct request_queue *q = drive->queue;
-		int rc;
-#ifdef DEBUG_PM
-		printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
-#endif
-		rc = ide_wait_not_busy(hwif, 35000);
-		if (rc)
-			printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
-		tp_ops->dev_select(drive);
-		tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-		rc = ide_wait_not_busy(hwif, 100000);
-		if (rc)
-			printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
-
-		blk_mq_start_hw_queues(q);
-	}
-}