Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
     take config space accessor functions.

     Implement pci_find_capability(), pci_find_ext_capability(), and
     dwc, dwc endpoint, and cadence capability search interfaces with
     them (Hans Zhang)

   - Leave parent unit address 0 in 'interrupt-map' so that when we
     build devicetree nodes to describe PCI functions that contain
     multiple peripherals, we can build this property even when
     interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)

   - Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
     Request Size to 128B to avoid a performance issue (Ilpo Järvinen)

   - Add sysfs 'serial_number' file to expose the Device Serial Number
     (Matthew Wood)

   - Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)

  Resource management:

   - Align m68k pcibios_enable_device() with other arches (Ilpo
     Järvinen)

   - Remove sparc pcibios_enable_device() implementations that don't do
     anything beyond what pci_enable_resources() does (Ilpo Järvinen)

   - Remove mips pcibios_enable_resources() and use
     pci_enable_resources() instead (Ilpo Järvinen)

   - Clean up bridge window sizing and assignment (Ilpo Järvinen),
     including:

       - Leave non-claimed bridge windows disabled

       - Enable bridges even if a window wasn't assigned because not all
         windows are required by downstream devices

       - Preserve bridge window type when releasing the resource, since
         the type is needed for reassignment

       - Consolidate selection of bridge windows into two new
         interfaces, pbus_select_window() and
         pbus_select_window_for_type(), so this is done consistently

       - Compute bridge window start and end earlier to avoid logging
         stale information

  MSI:

   - Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
     Vives)

  Error handling:

   - Align AER with EEH by allowing drivers to request a Bus Reset on
     Non-Fatal Errors (in addition to the reset on Fatal Errors that we
     already do) (Lukas Wunner)

   - If error recovery fails, emit FAILED_RECOVERY uevents for the
     devices, not for the bridge leading to them.

     This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)

   - Align AER with EEH by calling err_handler.error_detected()
     callbacks to notify drivers if error recovery fails (Lukas Wunner)

   - Align AER with EEH by restoring device error_state to
     pci_channel_io_normal before the err_handler.slot_reset() callback.

     This is earlier than before the err_handler.resume() callback
     (Lukas Wunner)

   - Emit a BEGIN_RECOVERY uevent when driver's
     err_handler.error_detected() requests a reset, as well as when it
     says recovery is complete or can be done without a reset (Niklas
     Schnelle)

   - Align s390 with AER and EEH by emitting uevents during error
     recovery (Niklas Schnelle)

   - Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
     SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
     result of err_handler.error_detected() (Niklas Schnelle)

   - Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
     error information identifies a device without an AER Capability
     (Breno Leitao)

   - Update error decoding and TLP Log printing for new errors in
     current PCIe base spec (Lukas Wunner)

   - Update error recovery documentation to match the current code
     and use consistent nomenclature (Lukas Wunner)

  ASPM:

   - Enable all ClockPM and ASPM states for devicetree platforms, since
     there's typically no firmware that enables ASPM

     This is a risky change that may uncover hardware or configuration
     defects at boot-time rather than when users enable ASPM via sysfs
     later. Booting with "pcie_aspm=off" prevents this enabling
     (Manivannan Sadhasivam)

   - Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)

  Power management:

   - If a device has already been disconnected, e.g., by a hotplug
     removal, don't bother trying to resume it to D0 when detaching the
     driver.

     This avoids annoying "Unable to change power state from D3cold to
     D0" messages (Mario Limonciello)

   - Ensure devices are powered up before config reads for
     'max_link_width', 'current_link_speed', 'current_link_width',
     'secondary_bus_number', and 'subordinate_bus_number' sysfs files.

     This prevents using invalid data (~0) in drivers or lspci and,
     depending on how the PCIe controller reports errors, may avoid
     error interrupts or crashes (Brian Norris)

  Virtualization:

   - Add rescan/remove locking when enabling/disabling SR-IOV, which
     avoids list corruption on s390, where disabling SR-IOV also
     generates hotplug events (Niklas Schnelle)

  Peer-to-peer DMA:

   - Free struct p2p_pgmap, not a member within it, in the
     pci_p2pdma_add_resource() error path (Sungho Kim)

  Endpoint framework:

   - Document sysfs interface for BAR assignment of vNTB endpoint
     functions (Jerome Brunet)

   - Fix array underflow in endpoint BAR test case (Dan Carpenter)

   - Skip endpoint IRQ test if the IRQ is out of range to avoid false
     errors (Christian Bruel)

   - Fix endpoint test case for controllers with fixed-size BARs smaller
     than requested by the test (Marek Vasut)

   - Restore inbound translation when disabling doorbell so the endpoint
     doorbell test case can be run more than once (Niklas Cassel)

   - Avoid a NULL pointer dereference when releasing DMA channels in
     endpoint DMA test case (Shin'ichiro Kawasaki)

   - Convert tegra194 interrupt number to MSI vector to fix endpoint
     Kselftest MSI_TEST test case (Niklas Cassel)

   - Reset tegra194 BARs when running in endpoint mode so the BAR tests
     don't overwrite the ATU settings in BAR4 (Niklas Cassel)

   - Handle errors in tegra194 BPMP transactions so we don't mistakenly
     skip future PERST# assertion (Vidya Sagar)

  AMD MDB PCIe controller driver:

   - Update DT binding example to separate PERST# to a Root Port stanza
     to make multiple Root Ports possible in the future (Sai Krishna
     Musham)

   - Add driver support for PERST# being described in a Root Port
     stanza, falling back to the host bridge if not found there (Sai
     Krishna Musham)

  Freescale i.MX6 PCIe controller driver:

   - Enable the 3.3V Vaux supply if available so devices can request
     wakeup with either Beacon or WAKE# (Richard Zhu)

  MediaTek PCIe Gen3 controller driver:

   - Add optional sys clock ready time setting to avoid sys_clk_rdy
     signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)

   - Add DT binding and driver support for MT6991 and MT8196
     (AngeloGioacchino Del Regno)

  NVIDIA Tegra PCIe controller driver:

   - When asserting PERST#, disable the controller instead of mistakenly
     disabling the PLL twice (Nagarjuna Kristam)

   - Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
     nesting error (Marek Vasut)

  Qualcomm PCIe controller driver:

   - Select PCI Power Control Slot driver so slot voltage rails can be
     turned on/off if described in Root Port devicetree node (Qiang Yu)

   - Parse only PCI bridge child nodes in devicetree, skipping unrelated
     nodes such as OPP (Operating Performance Points), which caused
     probe failures (Krishna Chaitanya Chundru)

   - Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)

   - Consolidate Root Port 'phy' and 'reset' properties in struct
     qcom_pcie_port, regardless of whether we got them from the Root
     Port node or the host bridge node (Manivannan Sadhasivam)

   - Fetch and map the ELBI register space in the DWC core rather than
     in each driver individually (Krishna Chaitanya Chundru)

   - Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
     Shift Feature' and use this in the qcom driver (Krishna Chaitanya
     Chundru)

   - Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
     Chundru)

   - Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
     Glymur, which is compatible with X1E80100 but doesn't have the
     cnoc_sf_axi clock (Qiang Yu)

  Renesas R-Car PCIe controller driver:

   - Fix a typo that prevented correct PHY initialization (Marek Vasut)

   - Add a missing 1ms delay after PWR reset assertion as required by
     the V4H manual (Marek Vasut)

   - Assure reset has completed before DBI access to avoid SError (Marek
     Vasut)

   - Fix inverted PHY initialization check, which sometimes led to
     timeouts and failure to start the controller (Marek Vasut)

   - Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
     regression when converting to msi_create_parent_irq_domain()
     (Claudiu Beznea)

   - Drop the spinlock protecting the PMSR register - it's no longer
     required since pci_lock already serializes accesses (Marek Vasut)

   - Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
     nesting error (Marek Vasut)

  SOPHGO PCIe controller driver:

   - Check for existence of struct cdns_pcie.ops before using it to
     allow Cadence drivers that don't need to supply ops (Chen Wang)

   - Add DT binding and driver for the SOPHGO SG2042 PCIe controller
     (Chen Wang)

  STMicroelectronics STM32MP25 PCIe controller driver:

   - Update pinctrl documentation of initial states and use in runtime
     suspend/resume (Christian Bruel)

   - Add pinctrl_pm_select_init_state() for use by stm32 driver, which
     needs it during resume (Christian Bruel)

   - Add devicetree bindings and drivers for the STMicroelectronics
     STM32MP25 in host and endpoint modes (Christian Bruel)

  Synopsys DesignWare PCIe controller driver:

   - Add support for x16 in devicetree 'num-lanes' property (Konrad
     Dybcio)

   - Verify that if DT specifies a single IRQ for all eDMA channels, it
     is named 'dma' (Niklas Cassel)

  TI J721E PCIe driver:

   - Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
     Vadapalli)

   - Power controller off before configuring the glue layer so the
     controller latches the correct values on power-on (Siddharth
     Vadapalli)

  TI Keystone PCIe controller driver:

   - Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
     exits with error (Siddharth Vadapalli)

   - Add Peripheral Virtualization Unit (PVU), which restricts DMA from
     PCIe devices to specific regions of host memory, to the ti,am65
     binding (Jan Kiszka)

  Xilinx NWL PCIe controller driver:

   - Clear bootloader E_ECAM_CONTROL before merging in the new driver
     value to avoid writing invalid values (Jani Nurminen)"

* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
  PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
  MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
  PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
  dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
  PCI: stm32: Add PCIe host support for STM32MP25
  PCI: xilinx-nwl: Fix ECAM programming
  PCI: j721e: Fix incorrect error message in probe()
  PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
  dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
  PCI: dwc: Support 16-lane operation
  PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
  PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
  PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
  PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
  PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
  PCI: rcar-gen4: Fix inverted break condition in PHY initialization
  PCI: rcar-gen4: Assure reset occurs before DBI access
  PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
  PCI: Set up bridge resources earlier
  PCI: rcar-host: Drop PMSR spinlock
  ...

1 files changed, 116 insertions, 95 deletions

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 294babe1816e..805edbbfe7eb 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -55,6 +55,7 @@
 #define PARF_AXI_MSTR_WR_ADDR_HALT_V2		0x1a8
 #define PARF_Q2A_FLUSH				0x1ac
 #define PARF_LTSSM				0x1b0
+#define PARF_SLV_DBI_ELBI			0x1b4
 #define PARF_INT_ALL_STATUS			0x224
 #define PARF_INT_ALL_CLEAR			0x228
 #define PARF_INT_ALL_MASK			0x22c
@@ -64,6 +65,16 @@
 #define PARF_DBI_BASE_ADDR_V2_HI		0x354
 #define PARF_SLV_ADDR_SPACE_SIZE_V2		0x358
 #define PARF_SLV_ADDR_SPACE_SIZE_V2_HI		0x35c
+#define PARF_BLOCK_SLV_AXI_WR_BASE		0x360
+#define PARF_BLOCK_SLV_AXI_WR_BASE_HI		0x364
+#define PARF_BLOCK_SLV_AXI_WR_LIMIT		0x368
+#define PARF_BLOCK_SLV_AXI_WR_LIMIT_HI		0x36c
+#define PARF_BLOCK_SLV_AXI_RD_BASE		0x370
+#define PARF_BLOCK_SLV_AXI_RD_BASE_HI		0x374
+#define PARF_BLOCK_SLV_AXI_RD_LIMIT		0x378
+#define PARF_BLOCK_SLV_AXI_RD_LIMIT_HI		0x37c
+#define PARF_ECAM_BASE				0x380
+#define PARF_ECAM_BASE_HI			0x384
 #define PARF_NO_SNOOP_OVERRIDE			0x3d4
 #define PARF_ATU_BASE_ADDR			0x634
 #define PARF_ATU_BASE_ADDR_HI			0x638
@@ -87,6 +98,7 @@
 
 /* PARF_SYS_CTRL register fields */
 #define MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN	BIT(29)
+#define PCIE_ECAM_BLOCKER_EN			BIT(26)
 #define MST_WAKEUP_EN				BIT(13)
 #define SLV_WAKEUP_EN				BIT(12)
 #define MSTR_ACLK_CGC_DIS			BIT(10)
@@ -134,6 +146,9 @@
 /* PARF_LTSSM register fields */
 #define LTSSM_EN				BIT(8)
 
+/* PARF_SLV_DBI_ELBI */
+#define SLV_DBI_ELBI_ADDR_BASE			GENMASK(11, 0)
+
 /* PARF_INT_ALL_{STATUS/CLEAR/MASK} register fields */
 #define PARF_INT_ALL_LINK_UP			BIT(13)
 #define PARF_INT_MSI_DEV_0_7			GENMASK(30, 23)
@@ -247,7 +262,6 @@ struct qcom_pcie_ops {
 	int (*get_resources)(struct qcom_pcie *pcie);
 	int (*init)(struct qcom_pcie *pcie);
 	int (*post_init)(struct qcom_pcie *pcie);
-	void (*host_post_init)(struct qcom_pcie *pcie);
 	void (*deinit)(struct qcom_pcie *pcie);
 	void (*ltssm_enable)(struct qcom_pcie *pcie);
 	int (*config_sid)(struct qcom_pcie *pcie);
@@ -276,11 +290,8 @@ struct qcom_pcie_port {
 struct qcom_pcie {
 	struct dw_pcie *pci;
 	void __iomem *parf;			/* DT parf */
-	void __iomem *elbi;			/* DT elbi */
 	void __iomem *mhi;
 	union qcom_pcie_resources res;
-	struct phy *phy;
-	struct gpio_desc *reset;
 	struct icc_path *icc_mem;
 	struct icc_path *icc_cpu;
 	const struct qcom_pcie_cfg *cfg;
@@ -297,11 +308,8 @@ static void qcom_perst_assert(struct qcom_pcie *pcie, bool assert)
 	struct qcom_pcie_port *port;
 	int val = assert ? 1 : 0;
 
-	if (list_empty(&pcie->ports))
-		gpiod_set_value_cansleep(pcie->reset, val);
-	else
-		list_for_each_entry(port, &pcie->ports, list)
-			gpiod_set_value_cansleep(port->reset, val);
+	list_for_each_entry(port, &pcie->ports, list)
+		gpiod_set_value_cansleep(port->reset, val);
 
 	usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
 }
@@ -318,14 +326,55 @@ static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
 	qcom_perst_assert(pcie, false);
 }
 
+static void qcom_pci_config_ecam(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct qcom_pcie *pcie = to_qcom_pcie(pci);
+	u64 addr, addr_end;
+	u32 val;
+
+	writel_relaxed(lower_32_bits(pci->dbi_phys_addr), pcie->parf + PARF_ECAM_BASE);
+	writel_relaxed(upper_32_bits(pci->dbi_phys_addr), pcie->parf + PARF_ECAM_BASE_HI);
+
+	/*
+	 * The only device on the root bus is a single Root Port. If we try to
+	 * access any devices other than Device/Function 00.0 on Bus 0, the TLP
+	 * will go outside of the controller to the PCI bus. But with CFG Shift
+	 * Feature (ECAM) enabled in iATU, there is no guarantee that the
+	 * response is going to be all F's. Hence, to make sure that the
+	 * requester gets all F's response for accesses other than the Root
+	 * Port, configure iATU to block the transactions starting from
+	 * function 1 of the root bus to the end of the root bus (i.e., from
+	 * dbi_base + 4KB to dbi_base + 1MB).
+	 */
+	addr = pci->dbi_phys_addr + SZ_4K;
+	writel_relaxed(lower_32_bits(addr), pcie->parf + PARF_BLOCK_SLV_AXI_WR_BASE);
+	writel_relaxed(upper_32_bits(addr), pcie->parf + PARF_BLOCK_SLV_AXI_WR_BASE_HI);
+
+	writel_relaxed(lower_32_bits(addr), pcie->parf + PARF_BLOCK_SLV_AXI_RD_BASE);
+	writel_relaxed(upper_32_bits(addr), pcie->parf + PARF_BLOCK_SLV_AXI_RD_BASE_HI);
+
+	addr_end = pci->dbi_phys_addr + SZ_1M - 1;
+
+	writel_relaxed(lower_32_bits(addr_end), pcie->parf + PARF_BLOCK_SLV_AXI_WR_LIMIT);
+	writel_relaxed(upper_32_bits(addr_end), pcie->parf + PARF_BLOCK_SLV_AXI_WR_LIMIT_HI);
+
+	writel_relaxed(lower_32_bits(addr_end), pcie->parf + PARF_BLOCK_SLV_AXI_RD_LIMIT);
+	writel_relaxed(upper_32_bits(addr_end), pcie->parf + PARF_BLOCK_SLV_AXI_RD_LIMIT_HI);
+
+	val = readl_relaxed(pcie->parf + PARF_SYS_CTRL);
+	val |= PCIE_ECAM_BLOCKER_EN;
+	writel_relaxed(val, pcie->parf + PARF_SYS_CTRL);
+}
+
 static int qcom_pcie_start_link(struct dw_pcie *pci)
 {
 	struct qcom_pcie *pcie = to_qcom_pcie(pci);
 
-	if (pcie_link_speed[pci->max_link_speed] == PCIE_SPEED_16_0GT) {
-		qcom_pcie_common_set_16gt_equalization(pci);
+	qcom_pcie_common_set_equalization(pci);
+
+	if (pcie_link_speed[pci->max_link_speed] == PCIE_SPEED_16_0GT)
 		qcom_pcie_common_set_16gt_lane_margining(pci);
-	}
 
 	/* Enable Link Training state machine */
 	if (pcie->cfg->ops->ltssm_enable)
@@ -414,12 +463,17 @@ static void qcom_pcie_configure_dbi_atu_base(struct qcom_pcie *pcie)
 
 static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie)
 {
+	struct dw_pcie *pci = pcie->pci;
 	u32 val;
 
+	if (!pci->elbi_base) {
+		dev_err(pci->dev, "ELBI is not present\n");
+		return;
+	}
 	/* enable link training */
-	val = readl(pcie->elbi + ELBI_SYS_CTRL);
+	val = readl(pci->elbi_base + ELBI_SYS_CTRL);
 	val |= ELBI_SYS_CTRL_LT_ENABLE;
-	writel(val, pcie->elbi + ELBI_SYS_CTRL);
+	writel(val, pci->elbi_base + ELBI_SYS_CTRL);
 }
 
 static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
@@ -1040,25 +1094,6 @@ static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
 	return 0;
 }
 
-static int qcom_pcie_enable_aspm(struct pci_dev *pdev, void *userdata)
-{
-	/*
-	 * Downstream devices need to be in D0 state before enabling PCI PM
-	 * substates.
-	 */
-	pci_set_power_state_locked(pdev, PCI_D0);
-	pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL);
-
-	return 0;
-}
-
-static void qcom_pcie_host_post_init_2_7_0(struct qcom_pcie *pcie)
-{
-	struct dw_pcie_rp *pp = &pcie->pci->pp;
-
-	pci_walk_bus(pp->bridge->bus, qcom_pcie_enable_aspm, NULL);
-}
-
 static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
@@ -1253,63 +1288,39 @@ static bool qcom_pcie_link_up(struct dw_pcie *pci)
 	return val & PCI_EXP_LNKSTA_DLLLA;
 }
 
-static void qcom_pcie_phy_exit(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_port *port;
-
-	if (list_empty(&pcie->ports))
-		phy_exit(pcie->phy);
-	else
-		list_for_each_entry(port, &pcie->ports, list)
-			phy_exit(port->phy);
-}
-
 static void qcom_pcie_phy_power_off(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_port *port;
 
-	if (list_empty(&pcie->ports)) {
-		phy_power_off(pcie->phy);
-	} else {
-		list_for_each_entry(port, &pcie->ports, list)
-			phy_power_off(port->phy);
-	}
+	list_for_each_entry(port, &pcie->ports, list)
+		phy_power_off(port->phy);
 }
 
 static int qcom_pcie_phy_power_on(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_port *port;
-	int ret = 0;
+	int ret;
 
-	if (list_empty(&pcie->ports)) {
-		ret = phy_set_mode_ext(pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
+	list_for_each_entry(port, &pcie->ports, list) {
+		ret = phy_set_mode_ext(port->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
 		if (ret)
 			return ret;
 
-		ret = phy_power_on(pcie->phy);
-		if (ret)
+		ret = phy_power_on(port->phy);
+		if (ret) {
+			qcom_pcie_phy_power_off(pcie);
 			return ret;
-	} else {
-		list_for_each_entry(port, &pcie->ports, list) {
-			ret = phy_set_mode_ext(port->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
-			if (ret)
-				return ret;
-
-			ret = phy_power_on(port->phy);
-			if (ret) {
-				qcom_pcie_phy_power_off(pcie);
-				return ret;
-			}
 		}
 	}
 
-	return ret;
+	return 0;
 }
 
 static int qcom_pcie_host_init(struct dw_pcie_rp *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct qcom_pcie *pcie = to_qcom_pcie(pci);
+	u16 offset;
 	int ret;
 
 	qcom_ep_reset_assert(pcie);
@@ -1318,6 +1329,17 @@ static int qcom_pcie_host_init(struct dw_pcie_rp *pp)
 	if (ret)
 		return ret;
 
+	if (pp->ecam_enabled) {
+		/*
+		 * Override ELBI when ECAM is enabled, as when ECAM is enabled,
+		 * ELBI moves under the 'config' space.
+		 */
+		offset = FIELD_GET(SLV_DBI_ELBI_ADDR_BASE, readl(pcie->parf + PARF_SLV_DBI_ELBI));
+		pci->elbi_base = pci->dbi_base + offset;
+
+		qcom_pci_config_ecam(pp);
+	}
+
 	ret = qcom_pcie_phy_power_on(pcie);
 	if (ret)
 		goto err_deinit;
@@ -1358,19 +1380,9 @@ static void qcom_pcie_host_deinit(struct dw_pcie_rp *pp)
 	pcie->cfg->ops->deinit(pcie);
 }
 
-static void qcom_pcie_host_post_init(struct dw_pcie_rp *pp)
-{
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct qcom_pcie *pcie = to_qcom_pcie(pci);
-
-	if (pcie->cfg->ops->host_post_init)
-		pcie->cfg->ops->host_post_init(pcie);
-}
-
 static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
 	.init		= qcom_pcie_host_init,
 	.deinit		= qcom_pcie_host_deinit,
-	.post_init	= qcom_pcie_host_post_init,
 };
 
 /* Qcom IP rev.: 2.1.0	Synopsys IP rev.: 4.01a */
@@ -1432,7 +1444,6 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
 	.get_resources = qcom_pcie_get_resources_2_7_0,
 	.init = qcom_pcie_init_2_7_0,
 	.post_init = qcom_pcie_post_init_2_7_0,
-	.host_post_init = qcom_pcie_host_post_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 	.config_sid = qcom_pcie_config_sid_1_9_0,
@@ -1443,7 +1454,6 @@ static const struct qcom_pcie_ops ops_1_21_0 = {
 	.get_resources = qcom_pcie_get_resources_2_7_0,
 	.init = qcom_pcie_init_2_7_0,
 	.post_init = qcom_pcie_post_init_2_7_0,
-	.host_post_init = qcom_pcie_host_post_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
@@ -1740,6 +1750,8 @@ static int qcom_pcie_parse_ports(struct qcom_pcie *pcie)
 	int ret = -ENOENT;
 
 	for_each_available_child_of_node_scoped(dev->of_node, of_port) {
+		if (!of_node_is_type(of_port, "pci"))
+			continue;
 		ret = qcom_pcie_parse_port(pcie, of_port);
 		if (ret)
 			goto err_port_del;
@@ -1748,8 +1760,10 @@ static int qcom_pcie_parse_ports(struct qcom_pcie *pcie)
 	return ret;
 
 err_port_del:
-	list_for_each_entry_safe(port, tmp, &pcie->ports, list)
+	list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
+		phy_exit(port->phy);
 		list_del(&port->list);
+	}
 
 	return ret;
 }
@@ -1757,20 +1771,32 @@ err_port_del:
 static int qcom_pcie_parse_legacy_binding(struct qcom_pcie *pcie)
 {
 	struct device *dev = pcie->pci->dev;
+	struct qcom_pcie_port *port;
+	struct gpio_desc *reset;
+	struct phy *phy;
 	int ret;
 
-	pcie->phy = devm_phy_optional_get(dev, "pciephy");
-	if (IS_ERR(pcie->phy))
-		return PTR_ERR(pcie->phy);
+	phy = devm_phy_optional_get(dev, "pciephy");
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
 
-	pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
-	if (IS_ERR(pcie->reset))
-		return PTR_ERR(pcie->reset);
+	reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
+	if (IS_ERR(reset))
+		return PTR_ERR(reset);
 
-	ret = phy_init(pcie->phy);
+	ret = phy_init(phy);
 	if (ret)
 		return ret;
 
+	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	port->reset = reset;
+	port->phy = phy;
+	INIT_LIST_HEAD(&port->list);
+	list_add_tail(&port->list, &pcie->ports);
+
 	return 0;
 }
 
@@ -1861,12 +1887,6 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 		goto err_pm_runtime_put;
 	}
 
-	pcie->elbi = devm_platform_ioremap_resource_byname(pdev, "elbi");
-	if (IS_ERR(pcie->elbi)) {
-		ret = PTR_ERR(pcie->elbi);
-		goto err_pm_runtime_put;
-	}
-
 	/* MHI region is optional */
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mhi");
 	if (res) {
@@ -1984,9 +2004,10 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 err_host_deinit:
 	dw_pcie_host_deinit(pp);
 err_phy_exit:
-	qcom_pcie_phy_exit(pcie);
-	list_for_each_entry_safe(port, tmp, &pcie->ports, list)
+	list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
+		phy_exit(port->phy);
 		list_del(&port->list);
+	}
 err_pm_runtime_put:
 	pm_runtime_put(dev);
 	pm_runtime_disable(dev);