Merge series "spi: spi-sun6i: One fix and some improvements" from Marc Kleine-Budde <mkl@pengutronix.de>:

Hello,

this series first fixes the calculation of the clock rate. The driver will
round up to the nearest clock rate instead of rounding down. Resulting in SPI
devices accessed with a too high SPI clock.

The remaining patches improve the performance of the driver. The changes range
from micro-optimizations like reducing MMIO writes to the controller to
reducing the number of needed interrupts in some use cases.

regards,
Marc

changes since v1:
- added Maxime Ripard's to the existing patches
- 06/10: (was 05/10 in v1)
  "spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it"
  use FIELD_GET instead of open coding it
  (tnx: Maxime Ripard)
- 05/10: "spi: spi-sun6i: sun6i_spi_get_tx_fifo_count: Convert manual shift+mask to FIELD_GET()"
  new patch

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

1 files changed, 22 insertions, 17 deletions

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 58190c94561f..91c6affe139c 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1109,6 +1109,8 @@ static int dspi_suspend(struct device *dev)
 	struct spi_controller *ctlr = dev_get_drvdata(dev);
 	struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
 
+	if (dspi->irq)
+		disable_irq(dspi->irq);
 	spi_controller_suspend(ctlr);
 	clk_disable_unprepare(dspi->clk);
 
@@ -1129,6 +1131,8 @@ static int dspi_resume(struct device *dev)
 	if (ret)
 		return ret;
 	spi_controller_resume(ctlr);
+	if (dspi->irq)
+		enable_irq(dspi->irq);
 
 	return 0;
 }
@@ -1385,22 +1389,22 @@ static int dspi_probe(struct platform_device *pdev)
 		goto poll_mode;
 	}
 
-	ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt,
-			       IRQF_SHARED, pdev->name, dspi);
+	init_completion(&dspi->xfer_done);
+
+	ret = request_threaded_irq(dspi->irq, dspi_interrupt, NULL,
+				   IRQF_SHARED, pdev->name, dspi);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
 		goto out_clk_put;
 	}
 
-	init_completion(&dspi->xfer_done);
-
 poll_mode:
 
 	if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
 		ret = dspi_request_dma(dspi, res->start);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "can't get dma channels\n");
-			goto out_clk_put;
+			goto out_free_irq;
 		}
 	}
 
@@ -1415,11 +1419,14 @@ poll_mode:
 	ret = spi_register_controller(ctlr);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Problem registering DSPI ctlr\n");
-		goto out_clk_put;
+		goto out_free_irq;
 	}
 
 	return ret;
 
+out_free_irq:
+	if (dspi->irq)
+		free_irq(dspi->irq, dspi);
 out_clk_put:
 	clk_disable_unprepare(dspi->clk);
 out_ctlr_put:
@@ -1434,18 +1441,8 @@ static int dspi_remove(struct platform_device *pdev)
 	struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
 
 	/* Disconnect from the SPI framework */
-	dspi_release_dma(dspi);
-	clk_disable_unprepare(dspi->clk);
 	spi_unregister_controller(dspi->ctlr);
 
-	return 0;
-}
-
-static void dspi_shutdown(struct platform_device *pdev)
-{
-	struct spi_controller *ctlr = platform_get_drvdata(pdev);
-	struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
-
 	/* Disable RX and TX */
 	regmap_update_bits(dspi->regmap, SPI_MCR,
 			   SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF,
@@ -1455,8 +1452,16 @@ static void dspi_shutdown(struct platform_device *pdev)
 	regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_HALT, SPI_MCR_HALT);
 
 	dspi_release_dma(dspi);
+	if (dspi->irq)
+		free_irq(dspi->irq, dspi);
 	clk_disable_unprepare(dspi->clk);
-	spi_unregister_controller(dspi->ctlr);
+
+	return 0;
+}
+
+static void dspi_shutdown(struct platform_device *pdev)
+{
+	dspi_remove(pdev);
 }
 
 static struct platform_driver fsl_dspi_driver = {