diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-06-22 13:58:47 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-06-22 13:58:47 -0700 |
| commit | e24638afe264fd0f189ae7bb5941ea18b030911c (patch) | |
| tree | a32411a0e5a6a849e9a0e99810ff6f2380ac86c7 /drivers/spi/spi-stm32-qspi.c | |
| parent | c2fc946223f565d99322e942cdc46396d3c7d60b (diff) | |
| parent | df75470b317b46affbe1f5f8f006b34175be9789 (diff) | |
Merge tag 'spi-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A number of fixes that have built up for SPI, a bunch of driver
specific ones including an unfortunate revert of an optimisation for
the i.MX driver which was causing issues with some configurations,
plus a couple of core fixes for the rarely used octal mode and for a
bad interaction between multi-CS support and target mode"
* tag 'spi-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-imx: imx51: revert burst length calculation back to bits_per_word
spi: Fix SPI slave probe failure
spi: Fix OCTAL mode support
spi: stm32: qspi: Clamp stm32_qspi_get_mode() output to CCR_BUSWIDTH_4
spi: stm32: qspi: Fix dual flash mode sanity test in stm32_qspi_setup()
spi: cs42l43: Drop cs35l56 SPI speed down to 11MHz
spi: cs42l43: Correct SPI root clock speed
Diffstat (limited to 'drivers/spi/spi-stm32-qspi.c')
| -rw-r--r-- | drivers/spi/spi-stm32-qspi.c | 12 |
1 files changed, 5 insertions, 7 deletions
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c index f1e922fd362a..955c920c4b63 100644 --- a/drivers/spi/spi-stm32-qspi.c +++ b/drivers/spi/spi-stm32-qspi.c @@ -349,7 +349,7 @@ static int stm32_qspi_wait_poll_status(struct stm32_qspi *qspi) static int stm32_qspi_get_mode(u8 buswidth) { - if (buswidth == 4) + if (buswidth >= 4) return CCR_BUSWIDTH_4; return buswidth; @@ -653,9 +653,7 @@ static int stm32_qspi_setup(struct spi_device *spi) return -EINVAL; mode = spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL); - if ((mode == SPI_TX_OCTAL || mode == SPI_RX_OCTAL) || - ((mode == (SPI_TX_OCTAL | SPI_RX_OCTAL)) && - gpiod_count(qspi->dev, "cs") == -ENOENT)) { + if (mode && gpiod_count(qspi->dev, "cs") == -ENOENT) { dev_err(qspi->dev, "spi-rx-bus-width\\/spi-tx-bus-width\\/cs-gpios\n"); dev_err(qspi->dev, "configuration not supported\n"); @@ -676,10 +674,10 @@ static int stm32_qspi_setup(struct spi_device *spi) qspi->cr_reg = CR_APMS | 3 << CR_FTHRES_SHIFT | CR_SSHIFT | CR_EN; /* - * Dual flash mode is only enable in case SPI_TX_OCTAL and SPI_TX_OCTAL - * are both set in spi->mode and "cs-gpios" properties is found in DT + * Dual flash mode is only enable in case SPI_TX_OCTAL or SPI_RX_OCTAL + * is set in spi->mode and "cs-gpios" properties is found in DT */ - if (mode == (SPI_TX_OCTAL | SPI_RX_OCTAL)) { + if (mode) { qspi->cr_reg |= CR_DFM; dev_dbg(qspi->dev, "Dual flash mode enable"); } |