gpio: tegra: Fix irq_set_affinity

The irq_set_affinity callback should not be set if parent IRQ domain doesn't present because gpio-tegra driver callback fails in this case, causing a noisy error messages on system suspend: Disabling non-boot CPUs ... IRQ 26: no longer affine to CPU1 IRQ128: set affinity failed(-22). IRQ130: set affinity failed(-22). IRQ131: set affinity failed(-22). IRQ 27: no longer affine to CPU2 IRQ128: set affinity failed(-22). IRQ130: set affinity failed(-22). IRQ131: set affinity failed(-22). IRQ 28: no longer affine to CPU3 IRQ128: set affinity failed(-22). IRQ130: set affinity failed(-22). IRQ131: set affinity failed(-22). Entering suspend state LP1 Hence just don't specify the irq_set_affinity callback if parent PMC IRQ domain is missing. Tegra isn't capable of setting affinity per GPIO, affinity could be set only per GPIO bank, thus there is nothing to do for gpio-tegra in regards to CPU affinity without the parent IRQ domain. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Tested-by: Dmitry Osipenko <digetx@gmail.com> # A500 T20 and Nexus7 T30 Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") Reported-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
author: Dmitry Osipenko <digetx@gmail.com> 2021-01-20 03:45:48 +0300
committer: Bartosz Golaszewski <bgolaszewski@baylibre.com> 2021-02-15 11:43:30 +0100
commit: 94de03ccc9f5d13e36cf1db8f9dfbf676fdfec07 (patch)
tree: 7d7ac1bb4299395485053ee46af7ccd7c6530a3d /kernel/fail_function.c
parent: 4a6eac2b4b129800a2ab37d7127e2244bce37653 (diff)
0 files changed, 0 insertions, 0 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 7b071a00425d..6663ffd23f25 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -5,6 +5,7 @@ config ARM64
 	select ACPI_CCA_REQUIRED if ACPI
 	select ACPI_GENERIC_GSI if ACPI
 	select ACPI_GTDT if ACPI
+	select ACPI_HOTPLUG_CPU if ACPI_PROCESSOR && HOTPLUG_CPU
 	select ACPI_IORT if ACPI
 	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
 	select ACPI_MCFG if (ACPI && PCI)
@@ -13,16 +14,17 @@ config ARM64
 	select ARCH_HAS_DEBUG_WX
 	select ARCH_BINFMT_ELF_EXTRA_PHDRS
 	select ARCH_BINFMT_ELF_STATE
-	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
 	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
 	select ARCH_ENABLE_MEMORY_HOTPLUG
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
 	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
 	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
 	select ARCH_HAS_CACHE_LINE_SIZE
+	select ARCH_HAS_CC_PLATFORM
 	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL
 	select ARCH_HAS_DEBUG_VM_PGTABLE
+	select ARCH_HAS_DMA_OPS if XEN
 	select ARCH_HAS_DMA_PREP_COHERENT
 	select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
 	select ARCH_HAS_FAST_MULTIPLIER
@@ -30,22 +32,29 @@ config ARM64
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_HAS_KCOV
+	select ARCH_HAS_KERNEL_FPU_SUPPORT if KERNEL_MODE_NEON
 	select ARCH_HAS_KEEPINITRD
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_MEM_ENCRYPT
+	select ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
 	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
-	select ARCH_HAS_PTE_DEVMAP
+	select ARCH_HAS_NONLEAF_PMD_YOUNG if ARM64_HAFT
+	select ARCH_HAS_PREEMPT_LAZY
+	select ARCH_HAS_PTDUMP
 	select ARCH_HAS_PTE_SPECIAL
+	select ARCH_HAS_HW_PTE_YOUNG
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_SET_MEMORY
+	select ARCH_HAS_MEM_ENCRYPT
+	select ARCH_HAS_FORCE_DMA_UNENCRYPTED
 	select ARCH_STACKWALK
 	select ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_HAS_STRICT_MODULE_RWX
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYSCALL_WRAPPER
-	select ARCH_HAS_TEARDOWN_DMA_OPS if IOMMU_SUPPORT
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAS_ZONE_DMA_SET if EXPERT
 	select ARCH_HAVE_ELF_PROT
@@ -91,12 +100,17 @@ config ARM64
 	select ARCH_SUPPORTS_SHADOW_CALL_STACK if CC_HAVE_SHADOW_CALL_STACK
 	select ARCH_SUPPORTS_LTO_CLANG if CPU_LITTLE_ENDIAN
 	select ARCH_SUPPORTS_LTO_CLANG_THIN
-	select ARCH_SUPPORTS_CFI_CLANG
+	select ARCH_SUPPORTS_CFI
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select ARCH_SUPPORTS_PAGE_TABLE_CHECK
 	select ARCH_SUPPORTS_PER_VMA_LOCK
+	select ARCH_SUPPORTS_HUGE_PFNMAP if TRANSPARENT_HUGEPAGE
+	select ARCH_SUPPORTS_RT
+	select ARCH_SUPPORTS_SCHED_SMT
+	select ARCH_SUPPORTS_SCHED_CLUSTER
+	select ARCH_SUPPORTS_SCHED_MC
 	select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
 	select ARCH_WANT_DEFAULT_BPF_JIT
@@ -104,9 +118,10 @@ config ARM64
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
 	select ARCH_WANT_LD_ORPHAN_WARN
+	select ARCH_WANTS_EXECMEM_LATE
 	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANTS_THP_SWAP if ARM64_4K_PAGES
-	select ARCH_HAS_UBSAN_SANITIZE_ALL
+	select ARCH_HAS_UBSAN
 	select ARM_AMBA
 	select ARM_ARCH_TIMER
 	select ARM_GIC
@@ -114,13 +129,15 @@ config ARM64
 	select ARM_GIC_V2M if PCI
 	select ARM_GIC_V3
 	select ARM_GIC_V3_ITS if PCI
+	select ARM_GIC_V5
 	select ARM_PSCI_FW
 	select BUILDTIME_TABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select CPU_PM if (SUSPEND || CPU_IDLE)
-	select CRC32
+	select CPUMASK_OFFSTACK if NR_CPUS > 256
 	select DCACHE_WORD_ACCESS
+	select HAVE_EXTRA_IPI_TRACEPOINTS
 	select DYNAMIC_FTRACE if FUNCTION_TRACER
 	select DMA_BOUNCE_UNALIGNED_KMALLOC
 	select DMA_DIRECT_REMAP
@@ -132,29 +149,30 @@ config ARM64
 	select GENERIC_ARCH_TOPOLOGY
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_DEVICES
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IOREMAP
+	select GENERIC_IRQ_ENTRY
 	select GENERIC_IRQ_IPI
+	select GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
 	select GENERIC_LIB_DEVMEM_IS_ALLOWED
 	select GENERIC_PCI_IOMAP
-	select GENERIC_PTDUMP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_GETTIMEOFDAY
-	select GENERIC_VDSO_TIME_NS
 	select HARDIRQS_SW_RESEND
 	select HAS_IOPORT
 	select HAVE_MOVE_PMD
 	select HAVE_MOVE_PUD
 	select HAVE_PCI
 	select HAVE_ACPI_APEI if (ACPI && EFI)
-	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
+	select HAVE_ALIGNED_STRUCT_PAGE
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_BITREVERSE
 	select HAVE_ARCH_COMPILER_H
@@ -162,20 +180,20 @@ config ARM64
 	select HAVE_ARCH_HUGE_VMAP
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_JUMP_LABEL_RELATIVE
-	select HAVE_ARCH_KASAN if !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
-	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
-	select HAVE_ARCH_KASAN_SW_TAGS if HAVE_ARCH_KASAN
-	select HAVE_ARCH_KASAN_HW_TAGS if (HAVE_ARCH_KASAN && ARM64_MTE)
+	select HAVE_ARCH_KASAN
+	select HAVE_ARCH_KASAN_VMALLOC
+	select HAVE_ARCH_KASAN_SW_TAGS
+	select HAVE_ARCH_KASAN_HW_TAGS if ARM64_MTE
 	# Some instrumentation may be unsound, hence EXPERT
 	select HAVE_ARCH_KCSAN if EXPERT
 	select HAVE_ARCH_KFENCE
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_KSTACK_ERASE
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
 	select HAVE_ARCH_PREL32_RELOCATIONS
 	select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 	select HAVE_ARCH_SECCOMP_FILTER
-	select HAVE_ARCH_STACKLEAK
 	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
@@ -191,22 +209,24 @@ config ARM64
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_ARGS \
-		if $(cc-option,-fpatchable-function-entry=2)
+		if (GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS || \
+		    CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS)
 	select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS \
 		if DYNAMIC_FTRACE_WITH_ARGS && DYNAMIC_FTRACE_WITH_CALL_OPS
 	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \
-		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG && \
-		    !CC_OPTIMIZE_FOR_SIZE)
+		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI && \
+		    (CC_IS_CLANG || !CC_OPTIMIZE_FOR_SIZE))
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \
 		if DYNAMIC_FTRACE_WITH_ARGS
 	select HAVE_SAMPLE_FTRACE_DIRECT
 	select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
+	select HAVE_BUILDTIME_MCOUNT_SORT
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
-	select HAVE_FAST_GUP
-	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_GUP_FAST
+	select HAVE_FTRACE_GRAPH_FUNC
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_ERROR_INJECTION
-	select HAVE_FUNCTION_GRAPH_RETVAL if HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_GRAPH_FREGS
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_GCC_PLUGINS
 	select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && \
@@ -214,7 +234,7 @@ config ARM64
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_IOREMAP_PROT
 	select HAVE_IRQ_TIME_ACCOUNTING
-	select HAVE_KVM
+	select HAVE_LIVEPATCH
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
 	select HAVE_PERF_EVENTS
@@ -223,18 +243,22 @@ config ARM64
 	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_PREEMPT_DYNAMIC_KEY
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_RELIABLE_STACKTRACE
 	select HAVE_POSIX_CPU_TIMERS_TASK_WORK
 	select HAVE_FUNCTION_ARG_ACCESS_API
 	select MMU_GATHER_RCU_TABLE_FREE
 	select HAVE_RSEQ
+	select HAVE_RUST if RUSTC_SUPPORTS_ARM64
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_GENERIC_VDSO
 	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
+	select HOTPLUG_SMT if HOTPLUG_CPU
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
+	select JUMP_LABEL
 	select KASAN_VMALLOC if KASAN
 	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
@@ -252,22 +276,36 @@ config ARM64
 	select SYSCTL_EXCEPTION_TRACE
 	select THREAD_INFO_IN_TASK
 	select HAVE_ARCH_USERFAULTFD_MINOR if USERFAULTFD
+	select HAVE_ARCH_USERFAULTFD_WP if USERFAULTFD
 	select TRACE_IRQFLAGS_SUPPORT
 	select TRACE_IRQFLAGS_NMI_SUPPORT
 	select HAVE_SOFTIRQ_ON_OWN_STACK
+	select USER_STACKTRACE_SUPPORT
+	select VDSO_GETRANDOM
+	select VMAP_STACK
 	help
 	  ARM 64-bit (AArch64) Linux support.
 
+config RUSTC_SUPPORTS_ARM64
+	def_bool y
+	depends on CPU_LITTLE_ENDIAN
+	# Shadow call stack is only supported on certain rustc versions.
+	#
+	# When using the UNWIND_PATCH_PAC_INTO_SCS option, rustc version 1.80+ is
+	# required due to use of the -Zfixed-x18 flag.
+	#
+	# Otherwise, rustc version 1.82+ is required due to use of the
+	# -Zsanitizer=shadow-call-stack flag.
+	depends on !SHADOW_CALL_STACK || RUSTC_VERSION >= 108200 || RUSTC_VERSION >= 108000 && UNWIND_PATCH_PAC_INTO_SCS
+
 config CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS
 	def_bool CC_IS_CLANG
 	# https://github.com/ClangBuiltLinux/linux/issues/1507
 	depends on AS_IS_GNU || (AS_IS_LLVM && (LD_IS_LLD || LD_VERSION >= 23600))
-	select HAVE_DYNAMIC_FTRACE_WITH_ARGS
 
 config GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS
 	def_bool CC_IS_GCC
 	depends on $(cc-option,-fpatchable-function-entry=2)
-	select HAVE_DYNAMIC_FTRACE_WITH_ARGS
 
 config 64BIT
 	def_bool y
@@ -275,39 +313,33 @@ config 64BIT
 config MMU
 	def_bool y
 
-config ARM64_PAGE_SHIFT
-	int
-	default 16 if ARM64_64K_PAGES
-	default 14 if ARM64_16K_PAGES
-	default 12
-
 config ARM64_CONT_PTE_SHIFT
 	int
-	default 5 if ARM64_64K_PAGES
-	default 7 if ARM64_16K_PAGES
+	default 5 if PAGE_SIZE_64KB
+	default 7 if PAGE_SIZE_16KB
 	default 4
 
 config ARM64_CONT_PMD_SHIFT
 	int
-	default 5 if ARM64_64K_PAGES
-	default 5 if ARM64_16K_PAGES
+	default 5 if PAGE_SIZE_64KB
+	default 5 if PAGE_SIZE_16KB
 	default 4
 
 config ARCH_MMAP_RND_BITS_MIN
-	default 14 if ARM64_64K_PAGES
-	default 16 if ARM64_16K_PAGES
+	default 14 if PAGE_SIZE_64KB
+	default 16 if PAGE_SIZE_16KB
 	default 18
 
 # max bits determined by the following formula:
-#  VA_BITS - PAGE_SHIFT - 3
+#  VA_BITS - PTDESC_TABLE_SHIFT
 config ARCH_MMAP_RND_BITS_MAX
 	default 19 if ARM64_VA_BITS=36
 	default 24 if ARM64_VA_BITS=39
 	default 27 if ARM64_VA_BITS=42
 	default 30 if ARM64_VA_BITS=47
-	default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES
-	default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES
-	default 33 if ARM64_VA_BITS=48
+	default 29 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_64K_PAGES
+	default 31 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_16K_PAGES
+	default 33 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52)
 	default 14 if ARM64_64K_PAGES
 	default 16 if ARM64_16K_PAGES
 	default 18
@@ -366,7 +398,9 @@ config PGTABLE_LEVELS
 	default 3 if ARM64_64K_PAGES && (ARM64_VA_BITS_48 || ARM64_VA_BITS_52)
 	default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39
 	default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47
+	default 4 if ARM64_16K_PAGES && (ARM64_VA_BITS_48 || ARM64_VA_BITS_52)
 	default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48
+	default 5 if ARM64_4K_PAGES && ARM64_VA_BITS_52
 
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
@@ -379,9 +413,9 @@ config BROKEN_GAS_INST
 
 config BUILTIN_RETURN_ADDRESS_STRIPS_PAC
 	bool
-	# Clang's __builtin_return_adddress() strips the PAC since 12.0.0
-	# https://reviews.llvm.org/D75044
-	default y if CC_IS_CLANG && (CLANG_VERSION >= 120000)
+	# Clang's __builtin_return_address() strips the PAC since 12.0.0
+	# https://github.com/llvm/llvm-project/commit/2a96f47c5ffca84cd774ad402cacd137f4bf45e2
+	default y if CC_IS_CLANG
 	# GCC's __builtin_return_address() strips the PAC since 11.1.0,
 	# and this was backported to 10.2.0, 9.4.0, 8.5.0, but not earlier
 	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94891
@@ -394,13 +428,13 @@ config BUILTIN_RETURN_ADDRESS_STRIPS_PAC
 config KASAN_SHADOW_OFFSET
 	hex
 	depends on KASAN_GENERIC || KASAN_SW_TAGS
-	default 0xdfff800000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && !KASAN_SW_TAGS
-	default 0xdfffc00000000000 if ARM64_VA_BITS_47 && !KASAN_SW_TAGS
+	default 0xdfff800000000000 if (ARM64_VA_BITS_48 || (ARM64_VA_BITS_52 && !ARM64_16K_PAGES)) && !KASAN_SW_TAGS
+	default 0xdfffc00000000000 if (ARM64_VA_BITS_47 || ARM64_VA_BITS_52) && ARM64_16K_PAGES && !KASAN_SW_TAGS
 	default 0xdffffe0000000000 if ARM64_VA_BITS_42 && !KASAN_SW_TAGS
 	default 0xdfffffc000000000 if ARM64_VA_BITS_39 && !KASAN_SW_TAGS
 	default 0xdffffff800000000 if ARM64_VA_BITS_36 && !KASAN_SW_TAGS
-	default 0xefff800000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && KASAN_SW_TAGS
-	default 0xefffc00000000000 if ARM64_VA_BITS_47 && KASAN_SW_TAGS
+	default 0xefff800000000000 if (ARM64_VA_BITS_48 || (ARM64_VA_BITS_52 && !ARM64_16K_PAGES)) && KASAN_SW_TAGS
+	default 0xefffc00000000000 if (ARM64_VA_BITS_47 || ARM64_VA_BITS_52) && ARM64_16K_PAGES && KASAN_SW_TAGS
 	default 0xeffffe0000000000 if ARM64_VA_BITS_42 && KASAN_SW_TAGS
 	default 0xefffffc000000000 if ARM64_VA_BITS_39 && KASAN_SW_TAGS
 	default 0xeffffff800000000 if ARM64_VA_BITS_36 && KASAN_SW_TAGS
@@ -420,7 +454,7 @@ config AMPERE_ERRATUM_AC03_CPU_38
 	default y
 	help
 	  This option adds an alternative code sequence to work around Ampere
-	  erratum AC03_CPU_38 on AmpereOne.
+	  errata AC03_CPU_38 and AC04_CPU_10 on AmpereOne.
 
 	  The affected design reports FEAT_HAFDBS as not implemented in
 	  ID_AA64MMFR1_EL1.HAFDBS, but (V)TCR_ELx.{HA,HD} are not RES0
@@ -434,6 +468,23 @@ config AMPERE_ERRATUM_AC03_CPU_38
 
 	  If unsure, say Y.
 
+config AMPERE_ERRATUM_AC04_CPU_23
+        bool "AmpereOne: AC04_CPU_23:  Failure to synchronize writes to HCR_EL2 may corrupt address translations."
+	default y
+	help
+	  This option adds an alternative code sequence to work around Ampere
+	  errata AC04_CPU_23 on AmpereOne.
+
+	  Updates to HCR_EL2 can rarely corrupt simultaneous translations for
+	  data addresses initiated by load/store instructions. Only
+	  instruction initiated translations are vulnerable, not translations
+	  from prefetches for example. A DSB before the store to HCR_EL2 is
+	  sufficient to prevent older instructions from hitting the window
+	  for corruption, and an ISB after is sufficient to prevent younger
+	  instructions from hitting the window for corruption.
+
+	  If unsure, say Y.
+
 config ARM64_WORKAROUND_CLEAN_CACHE
 	bool
 
@@ -545,9 +596,8 @@ config ARM64_ERRATUM_832075
 	  If unsure, say Y.
 
 config ARM64_ERRATUM_834220
-	bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault"
+	bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault (rare)"
 	depends on KVM
-	default y
 	help
 	  This option adds an alternative code sequence to work around ARM
 	  erratum 834220 on Cortex-A57 parts up to r1p2.
@@ -563,7 +613,7 @@ config ARM64_ERRATUM_834220
 	  as it depends on the alternative framework, which will only patch
 	  the kernel if an affected CPU is detected.
 
-	  If unsure, say Y.
+	  If unsure, say N.
 
 config ARM64_ERRATUM_1742098
 	bool "Cortex-A57/A72: 1742098: ELR recorded incorrectly on interrupt taken between cryptographic instructions in a sequence"
@@ -613,9 +663,6 @@ config ARM64_ERRATUM_843419
 
 	  If unsure, say Y.
 
-config ARM64_LD_HAS_FIX_ERRATUM_843419
-	def_bool $(ld-option,--fix-cortex-a53-843419)
-
 config ARM64_ERRATUM_1024718
 	bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update"
 	default y
@@ -690,8 +737,7 @@ config ARM64_WORKAROUND_REPEAT_TLBI
 	bool
 
 config ARM64_ERRATUM_2441007
-	bool "Cortex-A55: Completion of affected memory accesses might not be guaranteed by completion of a TLBI"
-	default y
+	bool "Cortex-A55: Completion of affected memory accesses might not be guaranteed by completion of a TLBI (rare)"
 	select ARM64_WORKAROUND_REPEAT_TLBI
 	help
 	  This option adds a workaround for ARM Cortex-A55 erratum #2441007.
@@ -704,11 +750,10 @@ config ARM64_ERRATUM_2441007
 	  Work around this by adding the affected CPUs to the list that needs
 	  TLB sequences to be done twice.
 
-	  If unsure, say Y.
+	  If unsure, say N.
 
 config ARM64_ERRATUM_1286807
-	bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation"
-	default y
+	bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation (rare)"
 	select ARM64_WORKAROUND_REPEAT_TLBI
 	help
 	  This option adds a workaround for ARM Cortex-A76 erratum 1286807.
@@ -722,6 +767,8 @@ config ARM64_ERRATUM_1286807
 	  invalidated has been observed by other observers. The
 	  workaround repeats the TLBI+DSB operation.
 
+	  If unsure, say N.
+
 config ARM64_ERRATUM_1463225
 	bool "Cortex-A76: Software Step might prevent interrupt recognition"
 	default y
@@ -741,8 +788,7 @@ config ARM64_ERRATUM_1463225
 	  If unsure, say Y.
 
 config ARM64_ERRATUM_1542419
-	bool "Neoverse-N1: workaround mis-ordering of instruction fetches"
-	default y
+	bool "Neoverse-N1: workaround mis-ordering of instruction fetches (rare)"
 	help
 	  This option adds a workaround for ARM Neoverse-N1 erratum
 	  1542419.
@@ -754,7 +800,7 @@ config ARM64_ERRATUM_1542419
 	  Workaround the issue by hiding the DIC feature from EL0. This
 	  forces user-space to perform cache maintenance.
 
-	  If unsure, say Y.
+	  If unsure, say N.
 
 config ARM64_ERRATUM_1508412
 	bool "Cortex-A77: 1508412: workaround deadlock on sequence of NC/Device load and store exclusive or PAR read"
@@ -929,8 +975,7 @@ config ARM64_ERRATUM_2224489
 	  If unsure, say Y.
 
 config ARM64_ERRATUM_2441009
-	bool "Cortex-A510: Completion of affected memory accesses might not be guaranteed by completion of a TLBI"
-	default y
+	bool "Cortex-A510: Completion of affected memory accesses might not be guaranteed by completion of a TLBI (rare)"
 	select ARM64_WORKAROUND_REPEAT_TLBI
 	help
 	  This option adds a workaround for ARM Cortex-A510 erratum #2441009.
@@ -943,7 +988,7 @@ config ARM64_ERRATUM_2441009
 	  Work around this by adding the affected CPUs to the list that needs
 	  TLB sequences to be done twice.
 
-	  If unsure, say Y.
+	  If unsure, say N.
 
 config ARM64_ERRATUM_2064142
 	bool "Cortex-A510: 2064142: workaround TRBE register writes while disabled"
@@ -1037,8 +1082,12 @@ config ARM64_ERRATUM_2645198
 
 	  If unsure, say Y.
 
+config ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	bool
+
 config ARM64_ERRATUM_2966298
 	bool "Cortex-A520: 2966298: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
 	default y
 	help
 	  This option adds the workaround for ARM Cortex-A520 erratum 2966298.
@@ -1050,6 +1099,61 @@ config ARM64_ERRATUM_2966298
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_3117295
+	bool "Cortex-A510: 3117295: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 3117295.
+
+	  On an affected Cortex-A510 core, a speculatively executed unprivileged
+	  load might leak data from a privileged level via a cache side channel.
+
+	  Work around this problem by executing a TLBI before returning to EL0.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_3194386
+	bool "Cortex-*/Neoverse-*: workaround for MSR SSBS not self-synchronizing"
+	default y
+	help
+	  This option adds the workaround for the following errata:
+
+	  * ARM Cortex-A76 erratum 3324349
+	  * ARM Cortex-A77 erratum 3324348
+	  * ARM Cortex-A78 erratum 3324344
+	  * ARM Cortex-A78C erratum 3324346
+	  * ARM Cortex-A78C erratum 3324347
+	  * ARM Cortex-A710 erratam 3324338
+	  * ARM Cortex-A715 errartum 3456084
+	  * ARM Cortex-A720 erratum 3456091
+	  * ARM Cortex-A725 erratum 3456106
+	  * ARM Cortex-X1 erratum 3324344
+	  * ARM Cortex-X1C erratum 3324346
+	  * ARM Cortex-X2 erratum 3324338
+	  * ARM Cortex-X3 erratum 3324335
+	  * ARM Cortex-X4 erratum 3194386
+	  * ARM Cortex-X925 erratum 3324334
+	  * ARM Neoverse-N1 erratum 3324349
+	  * ARM Neoverse N2 erratum 3324339
+	  * ARM Neoverse-N3 erratum 3456111
+	  * ARM Neoverse-V1 erratum 3324341
+	  * ARM Neoverse V2 erratum 3324336
+	  * ARM Neoverse-V3 erratum 3312417
+	  * ARM Neoverse-V3AE erratum 3312417
+
+	  On affected cores "MSR SSBS, #0" instructions may not affect
+	  subsequent speculative instructions, which may permit unexepected
+	  speculative store bypassing.
+
+	  Work around this problem by placing a Speculation Barrier (SB) or
+	  Instruction Synchronization Barrier (ISB) after kernel changes to
+	  SSBS. The presence of the SSBS special-purpose register is hidden
+	  from hwcaps and EL0 reads of ID_AA64PFR1_EL1, such that userspace
+	  will use the PR_SPEC_STORE_BYPASS prctl to change SSBS.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
@@ -1158,6 +1262,17 @@ config HISILICON_ERRATUM_161600802
 
 	  If unsure, say Y.
 
+config HISILICON_ERRATUM_162100801
+	bool "Hip09 162100801 erratum support"
+	default y
+	help
+	  When enabling GICv4.1 in hip09, VMAPP will fail to clear some caches
+	  during unmapping operation, which will cause some vSGIs lost.
+	  To fix the issue, invalidate related vPE cache through GICR_INVALLR
+	  after VMOVP.
+
+	  If unsure, say Y.
+
 config QCOM_FALKOR_ERRATUM_1003
 	bool "Falkor E1003: Incorrect translation due to ASID change"
 	default y
@@ -1210,6 +1325,15 @@ config NVIDIA_CARMEL_CNP_ERRATUM
 
 	  If unsure, say Y.
 
+config ROCKCHIP_ERRATUM_3568002
+	bool "Rockchip 3568002: GIC600 can not access physical addresses higher than 4GB"
+	default y
+	help
+	  The Rockchip RK3566 and RK3568 GIC600 SoC integrations have AXI
+	  addressing limited to the first 32bit of physical address space.
+
+	  If unsure, say Y.
+
 config ROCKCHIP_ERRATUM_3588001
 	bool "Rockchip 3588001: GIC600 can not support shareability attributes"
 	default y
@@ -1239,11 +1363,13 @@ choice
 
 config ARM64_4K_PAGES
 	bool "4KB"
+	select HAVE_PAGE_SIZE_4KB
 	help
 	  This feature enables 4KB pages support.
 
 config ARM64_16K_PAGES
 	bool "16KB"
+	select HAVE_PAGE_SIZE_16KB
 	help
 	  The system will use 16KB pages support. AArch32 emulation
 	  requires applications compiled with 16K (or a multiple of 16K)
@@ -1251,6 +1377,7 @@ config ARM64_16K_PAGES
 
 config ARM64_64K_PAGES
 	bool "64KB"
+	select HAVE_PAGE_SIZE_64KB
 	help
 	  This feature enables 64KB pages support (4KB by default)
 	  allowing only two levels of page tables and faster TLB
@@ -1261,9 +1388,7 @@ endchoice
 
 choice
 	prompt "Virtual address space size"
-	default ARM64_VA_BITS_39 if ARM64_4K_PAGES
-	default ARM64_VA_BITS_47 if ARM64_16K_PAGES
-	default ARM64_VA_BITS_42 if ARM64_64K_PAGES
+	default ARM64_VA_BITS_52
 	help
 	  Allows choosing one of multiple possible virtual address
 	  space sizes. The level of translation table is determined by
@@ -1271,26 +1396,25 @@ choice
 
 config ARM64_VA_BITS_36
 	bool "36-bit" if EXPERT
-	depends on ARM64_16K_PAGES
+	depends on PAGE_SIZE_16KB
 
 config ARM64_VA_BITS_39
 	bool "39-bit"
-	depends on ARM64_4K_PAGES
+	depends on PAGE_SIZE_4KB
 
 config ARM64_VA_BITS_42
 	bool "42-bit"
-	depends on ARM64_64K_PAGES
+	depends on PAGE_SIZE_64KB
 
 config ARM64_VA_BITS_47
 	bool "47-bit"
-	depends on ARM64_16K_PAGES
+	depends on PAGE_SIZE_16KB
 
 config ARM64_VA_BITS_48
 	bool "48-bit"
 
 config ARM64_VA_BITS_52
 	bool "52-bit"
-	depends on ARM64_64K_PAGES && (ARM64_PAN || !ARM64_SW_TTBR0_PAN)
 	help
 	  Enable 52-bit virtual addressing for userspace when explicitly
 	  requested via a hint to mmap(). The kernel will also use 52-bit
@@ -1337,11 +1461,11 @@ choice
 
 config ARM64_PA_BITS_48
 	bool "48-bit"
+	depends on ARM64_64K_PAGES || !ARM64_VA_BITS_52
 
 config ARM64_PA_BITS_52
-	bool "52-bit (ARMv8.2)"
-	depends on ARM64_64K_PAGES
-	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
+	bool "52-bit"
+	depends on ARM64_64K_PAGES || ARM64_VA_BITS_52
 	help
 	  Enable support for a 52-bit physical address space, introduced as
 	  part of the ARMv8.2-LPA extension.
@@ -1357,6 +1481,10 @@ config ARM64_PA_BITS
 	default 48 if ARM64_PA_BITS_48
 	default 52 if ARM64_PA_BITS_52
 
+config ARM64_LPA2
+	def_bool y
+	depends on ARM64_PA_BITS_52 && !ARM64_64K_PAGES
+
 choice
 	prompt "Endianness"
 	default CPU_LITTLE_ENDIAN
@@ -1367,9 +1495,7 @@ choice
 
 config CPU_BIG_ENDIAN
 	bool "Build big-endian kernel"
-	depends on !LD_IS_LLD || LLD_VERSION >= 130000
-	# https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161c
-	depends on AS_IS_GNU || AS_VERSION >= 150000
+	depends on BROKEN
 	help
 	  Say Y if you plan on running a kernel with a big-endian userspace.
 
@@ -1381,33 +1507,10 @@ config CPU_LITTLE_ENDIAN
 
 endchoice
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_CLUSTER
-	bool "Cluster scheduler support"
-	help
-	  Cluster scheduler support improves the CPU scheduler's decision
-	  making when dealing with machines that have clusters of CPUs.
-	  Cluster usually means a couple of CPUs which are placed closely
-	  by sharing mid-level caches, last-level cache tags or internal
-	  busses.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config NR_CPUS
 	int "Maximum number of CPUs (2-4096)"
 	range 2 4096
-	default "256"
+	default "512"
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
@@ -1420,7 +1523,6 @@ config HOTPLUG_CPU
 config NUMA
 	bool "NUMA Memory Allocation and Scheduler Support"
 	select GENERIC_ARCH_NUMA
-	select ACPI_NUMA if ACPI
 	select OF_NUMA
 	select HAVE_SETUP_PER_CPU_AREA
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK
@@ -1447,7 +1549,6 @@ source "kernel/Kconfig.hz"
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
 	select SPARSEMEM_VMEMMAP_ENABLE
-	select SPARSEMEM_VMEMMAP
 
 config HW_PERF_EVENTS
 	def_bool y
@@ -1495,11 +1596,17 @@ config ARCH_SUPPORTS_KEXEC_IMAGE_VERIFY_SIG
 config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG
 	def_bool y
 
+config ARCH_SUPPORTS_KEXEC_HANDOVER
+	def_bool y
+
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool y
 
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
+
 config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION
-	def_bool CRASH_CORE
+	def_bool CRASH_RESERVE
 
 config TRANS_TABLE
 	def_bool y
@@ -1519,15 +1626,15 @@ config XEN
 
 # include/linux/mmzone.h requires the following to be true:
 #
-#   MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
+#   MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
 #
-# so the maximum value of MAX_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT:
+# so the maximum value of MAX_PAGE_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT:
 #
-#     | SECTION_SIZE_BITS |  PAGE_SHIFT  |  max MAX_ORDER  |  default MAX_ORDER |
-# ----+-------------------+--------------+-----------------+--------------------+
-# 4K  |       27          |      12      |       15        |         10         |
-# 16K |       27          |      14      |       13        |         11         |
-# 64K |       29          |      16      |       13        |         13         |
+#     | SECTION_SIZE_BITS |  PAGE_SHIFT  |  max MAX_PAGE_ORDER  |  default MAX_PAGE_ORDER |
+# ----+-------------------+--------------+----------------------+-------------------------+
+# 4K  |       27          |      12      |       15             |         10              |
+# 16K |       27          |      14      |       13             |         11              |
+# 64K |       29          |      16      |       13             |         13              |
 config ARCH_FORCE_MAX_ORDER
 	int
 	default "13" if ARM64_64K_PAGES
@@ -1535,21 +1642,21 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
 	  large blocks of physically contiguous memory is required.
 
 	  The maximal size of allocation cannot exceed the size of the
-	  section, so the value of MAX_ORDER should satisfy
+	  section, so the value of MAX_PAGE_ORDER should satisfy
 
-	    MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
+	    MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
 
 	  Don't change if unsure.
 
 config UNMAP_KERNEL_AT_EL0
-	bool "Unmap kernel when running in userspace (aka \"KAISER\")" if EXPERT
+	bool "Unmap kernel when running in userspace (KPTI)" if EXPERT
 	default y
 	help
 	  Speculation attacks against some high-performance processors can
@@ -1569,22 +1676,10 @@ config MITIGATE_SPECTRE_BRANCH_HISTORY
 	  When taking an exception from user-space, a sequence of branches
 	  or a firmware call overwrites the branch history.
 
-config RODATA_FULL_DEFAULT_ENABLED
-	bool "Apply r/o permissions of VM areas also to their linear aliases"
-	default y
-	help
-	  Apply read-only attributes of VM areas to the linear alias of
-	  the backing pages as well. This prevents code or read-only data
-	  from being modified (inadvertently or intentionally) via another
-	  mapping of the same memory page. This additional enhancement can
-	  be turned off at runtime by passing rodata=[off|on] (and turned on
-	  with rodata=full if this option is set to 'n')
-
-	  This requires the linear region to be mapped down to pages,
-	  which may adversely affect performance in some cases.
-
 config ARM64_SW_TTBR0_PAN
 	bool "Emulate Privileged Access Never using TTBR0_EL1 switching"
+	depends on !KCSAN
+	select ARM64_PAN
 	help
 	  Enabling this option prevents the kernel from accessing
 	  user-space memory directly by pointing TTBR0_EL1 to a reserved
@@ -1651,7 +1746,6 @@ config COMPAT_VDSO
 	bool "Enable vDSO for 32-bit applications"
 	depends on !CPU_BIG_ENDIAN
 	depends on (CC_IS_CLANG && LD_IS_LLD) || "$(CROSS_COMPILE_COMPAT)" != ""
-	select GENERIC_COMPAT_VDSO
 	default y
 	help
 	  Place in the process address space of 32-bit applications an
@@ -1778,13 +1872,9 @@ config ARM64_PAN
 	  The feature is detected at runtime, and will remain as a 'nop'
 	  instruction if the cpu does not implement the feature.
 
-config AS_HAS_LSE_ATOMICS
-	def_bool $(as-instr,.arch_extension lse)
-
 config ARM64_LSE_ATOMICS
 	bool
 	default ARM64_USE_LSE_ATOMICS
-	depends on AS_HAS_LSE_ATOMICS
 
 config ARM64_USE_LSE_ATOMICS
 	bool "Atomic instructions"
@@ -1796,20 +1886,12 @@ config ARM64_USE_LSE_ATOMICS
 
 	  Say Y here to make use of these instructions for the in-kernel
 	  atomic routines. This incurs a small overhead on CPUs that do
-	  not support these instructions and requires the kernel to be
-	  built with binutils >= 2.25 in order for the new instructions
-	  to be used.
+	  not support these instructions.
 
 endmenu # "ARMv8.1 architectural features"
 
 menu "ARMv8.2 architectural features"
 
-config AS_HAS_ARMV8_2
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.2-a)
-
-config AS_HAS_SHA3
-	def_bool $(as-instr,.arch armv8.2-a+sha3)
-
 config ARM64_PMEM
 	bool "Enable support for persistent memory"
 	select ARCH_HAS_PMEM_API
@@ -1841,7 +1923,6 @@ config ARM64_RAS_EXTN
 config ARM64_CNP
 	bool "Enable support for Common Not Private (CNP) translations"
 	default y
-	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
 	help
 	  Common Not Private (CNP) allows translation table entries to
 	  be shared between different PEs in the same inner shareable
@@ -1884,7 +1965,6 @@ config ARM64_PTR_AUTH_KERNEL
 	bool "Use pointer authentication for kernel"
 	default y
 	depends on ARM64_PTR_AUTH
-	depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_ARMV8_3
 	# Modern compilers insert a .note.gnu.property section note for PAC
 	# which is only understood by binutils starting with version 2.33.1.
 	depends on LD_IS_LLD || LD_VERSION >= 23301 || (CC_IS_GCC && GCC_VERSION < 90100)
@@ -1905,19 +1985,10 @@ config CC_HAS_BRANCH_PROT_PAC_RET
 	# GCC 9 or later, clang 8 or later
 	def_bool $(cc-option,-mbranch-protection=pac-ret+leaf)
 
-config CC_HAS_SIGN_RETURN_ADDRESS
-	# GCC 7, 8
-	def_bool $(cc-option,-msign-return-address=all)
-
-config AS_HAS_ARMV8_3
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.3-a)
-
 config AS_HAS_CFI_NEGATE_RA_STATE
+	# binutils 2.34+
 	def_bool $(as-instr,.cfi_startproc\n.cfi_negate_ra_state\n.cfi_endproc\n)
 
-config AS_HAS_LDAPR
-	def_bool $(as-instr,.arch_extension rcpc)
-
 endmenu # "ARMv8.3 architectural features"
 
 menu "ARMv8.4 architectural features"
@@ -1945,20 +2016,13 @@ config ARM64_AMU_EXTN
 	  correctly reflect reality. Most commonly, the value read will be 0,
 	  indicating that the counter is not enabled.
 
-config AS_HAS_ARMV8_4
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.4-a)
-
 config ARM64_TLB_RANGE
 	bool "Enable support for tlbi range feature"
 	default y
-	depends on AS_HAS_ARMV8_4
 	help
 	  ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a
 	  range of input addresses.
 
-	  The feature introduces new assembly instructions, and they were
-	  support when binutils >= 2.30.
-
 endmenu # "ARMv8.4 architectural features"
 
 menu "ARMv8.5 architectural features"
@@ -1998,8 +2062,6 @@ config ARM64_BTI_KERNEL
 	depends on !CC_IS_GCC || GCC_VERSION >= 100100
 	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106671
 	depends on !CC_IS_GCC
-	# https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc76fcc4cc9
-	depends on !CC_IS_CLANG || CLANG_VERSION >= 120000
 	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_ARGS)
 	help
 	  Build the kernel with Branch Target Identification annotations
@@ -2036,12 +2098,12 @@ config ARM64_MTE
 	default y
 	depends on ARM64_AS_HAS_MTE && ARM64_TAGGED_ADDR_ABI
 	depends on AS_HAS_ARMV8_5
-	depends on AS_HAS_LSE_ATOMICS
 	# Required for tag checking in the uaccess routines
-	depends on ARM64_PAN
+	select ARM64_PAN
 	select ARCH_HAS_SUBPAGE_FAULTS
 	select ARCH_USES_HIGH_VMA_FLAGS
-	select ARCH_USES_PG_ARCH_X
+	select ARCH_USES_PG_ARCH_2
+	select ARCH_USES_PG_ARCH_3
 	help
 	  Memory Tagging (part of the ARMv8.5 Extensions) provides
 	  architectural support for run-time, always-on detection of
@@ -2078,6 +2140,67 @@ config ARM64_EPAN
 	  if the cpu does not implement the feature.
 endmenu # "ARMv8.7 architectural features"
 
+config AS_HAS_MOPS
+	def_bool $(as-instr,.arch_extension mops)
+
+menu "ARMv8.9 architectural features"
+
+config ARM64_POE
+	prompt "Permission Overlay Extension"
+	def_bool y
+	select ARCH_USES_HIGH_VMA_FLAGS
+	select ARCH_HAS_PKEYS
+	help
+	  The Permission Overlay Extension is used to implement Memory
+	  Protection Keys. Memory Protection Keys provides a mechanism for
+	  enforcing page-based protections, but without requiring modification
+	  of the page tables when an application changes protection domains.
+
+	  For details, see Documentation/core-api/protection-keys.rst
+
+	  If unsure, say y.
+
+config ARCH_PKEY_BITS
+	int
+	default 3
+
+config ARM64_HAFT
+	bool "Support for Hardware managed Access Flag for Table Descriptors"
+	depends on ARM64_HW_AFDBM
+	default y
+	help
+	  The ARMv8.9/ARMv9.5 introduces the feature Hardware managed Access
+	  Flag for Table descriptors. When enabled an architectural executed
+	  memory access will update the Access Flag in each Table descriptor
+	  which is accessed during the translation table walk and for which
+	  the Access Flag is 0. The Access Flag of the Table descriptor use
+	  the same bit of PTE_AF.
+
+	  The feature will only be enabled if all the CPUs in the system
+	  support this feature. If unsure, say Y.
+
+endmenu # "ARMv8.9 architectural features"
+
+menu "ARMv9.4 architectural features"
+
+config ARM64_GCS
+	bool "Enable support for Guarded Control Stack (GCS)"
+	default y
+	select ARCH_HAS_USER_SHADOW_STACK
+	select ARCH_USES_HIGH_VMA_FLAGS
+	help
+	  Guarded Control Stack (GCS) provides support for a separate
+	  stack with restricted access which contains only return
+	  addresses.  This can be used to harden against some attacks
+	  by comparing return address used by the program with what is
+	  stored in the GCS, and may also be used to efficiently obtain
+	  the call stack for applications such as profiling.
+
+	  The feature is detected at runtime, and will remain disabled
+	  if the system does not implement the feature.
+
+endmenu # "ARMv9.4 architectural features"
+
 config ARM64_SVE
 	bool "ARM Scalable Vector Extension support"
 	default y
@@ -2202,13 +2325,21 @@ config STACKPROTECTOR_PER_TASK
 
 config UNWIND_PATCH_PAC_INTO_SCS
 	bool "Enable shadow call stack dynamically using code patching"
-	# needs Clang with https://reviews.llvm.org/D111780 incorporated
-	depends on CC_IS_CLANG && CLANG_VERSION >= 150000
+	depends on CC_IS_CLANG
 	depends on ARM64_PTR_AUTH_KERNEL && CC_HAS_BRANCH_PROT_PAC_RET
 	depends on SHADOW_CALL_STACK
 	select UNWIND_TABLES
 	select DYNAMIC_SCS
 
+config ARM64_CONTPTE
+	bool "Contiguous PTE mappings for user memory" if EXPERT
+	depends on TRANSPARENT_HUGEPAGE
+	default y
+	help
+	  When enabled, user mappings are configured using the PTE contiguous
+	  bit, for any mappings that meet the size and alignment requirements.
+	  This reduces TLB pressure and improves performance.
+
 endmenu # "Kernel Features"
 
 menu "Boot options"
@@ -2231,7 +2362,8 @@ config CMDLINE
 	  root device (e.g. root=/dev/nfs).
 
 choice
-	prompt "Kernel command line type" if CMDLINE != ""
+	prompt "Kernel command line type"
+	depends on CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
 	help
 	  Choose how the kernel will handle the provided default kernel
@@ -2277,6 +2409,17 @@ config EFI
 	  allow the kernel to be booted as an EFI application. This
 	  is only useful on systems that have UEFI firmware.
 
+config COMPRESSED_INSTALL
+	bool "Install compressed image by default"
+	help
+	  This makes the regular "make install" install the compressed
+	  image we built, not the legacy uncompressed one.
+
+	  You can check that a compressed image works for you by doing
+	  "make zinstall" first, and verifying that everything is fine
+	  in your environment before making "make install" do this for
+	  you.
+
 config DMI
 	bool "Enable support for SMBIOS (DMI) tables"
 	depends on EFI
@@ -2319,3 +2462,4 @@ source "drivers/acpi/Kconfig"
 
 source "arch/arm64/kvm/Kconfig"
 
+source "kernel/livepatch/Kconfig"
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 24335565bad5..13173795c43d 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -8,6 +8,13 @@ config ARCH_ACTIONS
 	help
 	  This enables support for the Actions Semiconductor S900 SoC family.
 
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  This enables support for the ARM64 based Airoha SoCs.
+
 config ARCH_SUNXI
 	bool "Allwinner sunxi 64-bit SoC Family"
 	select ARCH_HAS_RESET_CONTROLLER
@@ -30,8 +37,21 @@ config ARCH_APPLE
 	bool "Apple Silicon SoC family"
 	select APPLE_AIC
 	help
-	  This enables support for Apple's in-house ARM SoC family, starting
-	  with the Apple M1.
+	  This enables support for Apple's in-house ARM SoC family, such
+	  as the Apple M1.
+
+config ARCH_ARTPEC
+	bool "Axis Communications ARTPEC SoC Family"
+	depends on ARCH_EXYNOS
+	select ARM_GIC
+	help
+	   This enables support for the ARMv8 based ARTPEC SoC Family.
+
+config ARCH_AXIADO
+	bool "Axiado SoC Family"
+	select GPIOLIB
+	help
+	  This enables support for Axiado SoC family like AX3000
 
 menuconfig ARCH_BCM
 	bool "Broadcom SoC Support"
@@ -94,6 +114,17 @@ config ARCH_BITMAIN
 	help
 	  This enables support for the Bitmain SoC Family.
 
+config ARCH_BLAIZE
+	bool "Blaize SoC Platforms"
+	help
+	  This enables support for the Blaize SoC family
+
+config ARCH_CIX
+	bool "Cixtech SoC family"
+	help
+	  This enables support for the Cixtech SoC family,
+	  like P1(sky1).
+
 config ARCH_EXYNOS
 	bool "Samsung Exynos SoC family"
 	select COMMON_CLK_SAMSUNG
@@ -107,29 +138,9 @@ config ARCH_EXYNOS
 	help
 	  This enables support for ARMv8 based Samsung Exynos SoC family.
 
-config ARCH_SPARX5
-	bool "Microchip Sparx5 SoC family"
-	select PINCTRL
-	select DW_APB_TIMER_OF
-	help
-	  This enables support for the Microchip Sparx5 ARMv8-based
-	  SoC family of TSN-capable gigabit switches.
-
-	  The SparX-5 Ethernet switch family provides a rich set of
-	  switching features such as advanced TCAM-based VLAN and QoS
-	  processing enabling delivery of differentiated services, and
-	  security through TCAM-based frame processing using versatile
-	  content aware processor (VCAP).
-
 config ARCH_K3
 	bool "Texas Instruments Inc. K3 multicore SoC architecture"
-	select PM_GENERIC_DOMAINS if PM
-	select MAILBOX
 	select SOC_TI
-	select TI_MESSAGE_MANAGER
-	select TI_SCI_PROTOCOL
-	select TI_SCI_INTR_IRQCHIP
-	select TI_SCI_INTA_IRQCHIP
 	select TI_K3_SOCINFO
 	help
 	  This enables support for Texas Instruments' K3 multicore SoC
@@ -168,6 +179,51 @@ config ARCH_MESON
 	  This enables support for the arm64 based Amlogic SoCs
 	  such as the s905, S905X/D, S912, A113X/D or S905X/D2
 
+menu "Microchip SoC support"
+
+config ARCH_MICROCHIP
+	bool
+
+config ARCH_LAN969X
+	bool "Microchip LAN969X SoC family"
+	select PINCTRL
+	select DW_APB_TIMER_OF
+	select ARCH_MICROCHIP
+	help
+	  This enables support for the Microchip LAN969X ARMv8-based
+	  SoC family of TSN-capable gigabit switches.
+
+	  The LAN969X Ethernet switch family provides a rich set of
+	  switching features such as advanced TCAM-based VLAN and QoS
+	  processing enabling delivery of differentiated services, and
+	  security through TCAM-based frame processing using versatile
+	  content aware processor (VCAP).
+
+config ARCH_SPARX5
+	bool "Microchip Sparx5 SoC family"
+	select PINCTRL
+	select DW_APB_TIMER_OF
+	select ARCH_MICROCHIP
+	help
+	  This enables support for the Microchip Sparx5 ARMv8-based
+	  SoC family of TSN-capable gigabit switches.
+
+	  The SparX-5 Ethernet switch family provides a rich set of
+	  switching features such as advanced TCAM-based VLAN and QoS
+	  processing enabling delivery of differentiated services, and
+	  security through TCAM-based frame processing using versatile
+	  content aware processor (VCAP).
+
+endmenu
+
+config ARCH_MMP
+	bool "Marvell MMP SoC Family"
+	select PINCTRL
+	select PINCTRL_SINGLE
+	help
+	  This enables support for Marvell MMP SoC family, currently
+	  supporting PXA1908 aka IAP140.
+
 config ARCH_MVEBU
 	bool "Marvell EBU SoC Family"
 	select ARMADA_AP806_SYSCON
@@ -200,7 +256,6 @@ if ARCH_NXP
 
 config ARCH_LAYERSCAPE
 	bool "Freescale Layerscape SoC family"
-	select EDAC_SUPPORT
 	help
 	  This enables support for the Freescale Layerscape SoC family.
 
@@ -260,6 +315,7 @@ config ARCH_QCOM
 	bool "Qualcomm Platforms"
 	select GPIOLIB
 	select PINCTRL
+	select HAVE_PWRCTRL if PCI
 	help
 	  This enables support for the ARMv8 based Qualcomm chipsets.
 
@@ -297,17 +353,29 @@ config ARCH_INTEL_SOCFPGA
 	  Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform,
 	  Agilex and eASIC N5X.
 
+config ARCH_SOPHGO
+	bool "Sophgo SoCs"
+	select ARCH_HAS_RESET_CONTROLLER
+	help
+	  This enables support for Sophgo SoC platform hardware.
+
 config ARCH_STM32
 	bool "STMicroelectronics STM32 SoC Family"
 	select GPIOLIB
 	select PINCTRL
-	select PINCTRL_STM32MP257
 	select ARM_SMC_MBOX
 	select ARM_SCMI_PROTOCOL
+	select REGULATOR
+	select REGULATOR_ARM_SCMI
 	select COMMON_CLK_SCMI
+	select STM32_FIREWALL
 	help
 	  This enables support for ARMv8 based STMicroelectronics
 	  STM32 family, including:
+		- STM32MP21:
+			- STM32MP211, STM32MP213, STM32MP215.
+		- STM32MP23:
+			- STM32MP231, STM32MP233, STM32MP235.
 		- STM32MP25:
 			- STM32MP251, STM32MP253, STM32MP255 and STM32MP257.
 
@@ -361,13 +429,12 @@ config ARCH_UNIPHIER
 	  This enables support for Socionext UniPhier SoC family.
 
 config ARCH_VEXPRESS
-	bool "ARMv8 software model (Versatile Express)"
+	bool "ARM Ltd Platforms"
 	select GPIOLIB
 	select PM
 	select PM_GENERIC_DOMAINS
 	help
-	  This enables support for the ARMv8 software model (Versatile
-	  Express).
+	  This enables support for the ARM Ltd Platforms.
 
 config ARCH_VISCONTI
 	bool "Toshiba Visconti SoC Family"
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 9a2d3723cd0f..73a10f65ce8b 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -10,20 +10,17 @@
 #
 # Copyright (C) 1995-2001 by Russell King
 
-LDFLAGS_vmlinux	:=--no-undefined -X
+LDFLAGS_vmlinux	:=--no-undefined -X --pic-veneer
 
 ifeq ($(CONFIG_RELOCATABLE), y)
 # Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
 # for relative relocs, since this leads to better Image compression
 # with the relocation offsets always being zero.
-LDFLAGS_vmlinux		+= -shared -Bsymbolic -z notext \
-			$(call ld-option, --no-apply-dynamic-relocs)
+LDFLAGS_vmlinux	+= -shared -Bsymbolic -z notext --no-apply-dynamic-relocs
 endif
 
 ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
-  ifeq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
 LDFLAGS_vmlinux	+= --fix-cortex-a53-843419
-  endif
 endif
 
 cc_has_k_constraint := $(call try-run,echo				\
@@ -36,11 +33,24 @@ ifeq ($(CONFIG_BROKEN_GAS_INST),y)
 $(warning Detected assembler with broken .inst; disassembly will be unreliable)
 endif
 
-KBUILD_CFLAGS	+= -mgeneral-regs-only	\
+# The GCC option -ffreestanding is required in order to compile code containing
+# ARM/NEON intrinsics in a non C99-compliant environment (such as the kernel)
+CC_FLAGS_FPU	:= -ffreestanding
+# Enable <arm_neon.h>
+CC_FLAGS_FPU	+= -isystem $(shell $(CC) -print-file-name=include)
+CC_FLAGS_NO_FPU	:= -mgeneral-regs-only
+
+KBUILD_CFLAGS	+= $(CC_FLAGS_NO_FPU) \
 		   $(compat_vdso) $(cc_has_k_constraint)
 KBUILD_CFLAGS	+= $(call cc-disable-warning, psabi)
 KBUILD_AFLAGS	+= $(compat_vdso)
 
+ifeq ($(call rustc-min-version, 108500),y)
+KBUILD_RUSTFLAGS += --target=aarch64-unknown-none-softfloat
+else
+KBUILD_RUSTFLAGS += --target=aarch64-unknown-none -Ctarget-feature="-neon"
+endif
+
 KBUILD_CFLAGS	+= $(call cc-option,-mabi=lp64)
 KBUILD_AFLAGS	+= $(call cc-option,-mabi=lp64)
 
@@ -48,9 +58,11 @@ KBUILD_AFLAGS	+= $(call cc-option,-mabi=lp64)
 ifneq ($(CONFIG_UNWIND_TABLES),y)
 KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables -fno-unwind-tables
 KBUILD_AFLAGS	+= -fno-asynchronous-unwind-tables -fno-unwind-tables
+KBUILD_RUSTFLAGS += -Cforce-unwind-tables=n
 else
 KBUILD_CFLAGS	+= -fasynchronous-unwind-tables
 KBUILD_AFLAGS	+= -fasynchronous-unwind-tables
+KBUILD_RUSTFLAGS += -Cforce-unwind-tables=y -Zuse-sync-unwind=n
 endif
 
 ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
@@ -60,12 +72,14 @@ stack_protector_prepare: prepare0
 				-mstack-protector-guard-reg=sp_el0	  \
 				-mstack-protector-guard-offset=$(shell	  \
 			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}' \
-					include/generated/asm-offsets.h))
+				$(objtree)/include/generated/asm-offsets.h))
 endif
 
 ifeq ($(CONFIG_ARM64_BTI_KERNEL),y)
   KBUILD_CFLAGS += -mbranch-protection=pac-ret+bti
+  KBUILD_RUSTFLAGS += -Zbranch-protection=bti,pac-ret
 else ifeq ($(CONFIG_ARM64_PTR_AUTH_KERNEL),y)
+  KBUILD_RUSTFLAGS += -Zbranch-protection=pac-ret
   ifeq ($(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET),y)
     KBUILD_CFLAGS += -mbranch-protection=pac-ret
   else
@@ -88,12 +102,8 @@ endif
 # hardware.
 ifeq ($(CONFIG_AS_HAS_ARMV8_5), y)
   asm-arch := armv8.5-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_4), y)
+else
   asm-arch := armv8.4-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_3), y)
-  asm-arch := armv8.3-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_2), y)
-  asm-arch := armv8.2-a
 endif
 
 ifdef asm-arch
@@ -103,6 +113,7 @@ endif
 
 ifeq ($(CONFIG_SHADOW_CALL_STACK), y)
 KBUILD_CFLAGS	+= -ffixed-x18
+KBUILD_RUSTFLAGS += -Zfixed-x18
 endif
 
 ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
@@ -150,6 +161,10 @@ libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
 # Default target when executing plain make
 boot		:= arch/arm64/boot
 
+BOOT_TARGETS	:= Image vmlinuz.efi image.fit
+
+PHONY += $(BOOT_TARGETS)
+
 ifeq ($(CONFIG_EFI_ZBOOT),)
 KBUILD_IMAGE	:= $(boot)/Image.gz
 else
@@ -158,29 +173,27 @@ endif
 
 all:	$(notdir $(KBUILD_IMAGE))
 
-vmlinuz.efi: Image
-Image vmlinuz.efi: vmlinux
+image.fit: dtbs
+
+vmlinuz.efi image.fit: Image
+$(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 Image.%: Image
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-install: KBUILD_IMAGE := $(boot)/Image
+ifeq ($(CONFIG_COMPRESSED_INSTALL),y)
+ DEFAULT_KBUILD_IMAGE = $(KBUILD_IMAGE)
+else
+ DEFAULT_KBUILD_IMAGE = $(boot)/Image
+endif
+
+install: KBUILD_IMAGE := $(DEFAULT_KBUILD_IMAGE)
 install zinstall:
 	$(call cmd,install)
 
 archprepare:
 	$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
-ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
-  ifneq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
-	@echo "warning: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum" >&2
-  endif
-endif
-ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS),y)
-  ifneq ($(CONFIG_ARM64_LSE_ATOMICS),y)
-	@echo "warning: LSE atomics not supported by binutils" >&2
-  endif
-endif
 
 ifeq ($(KBUILD_EXTMOD),)
 # We need to generate vdso-offsets.h before compiling certain files in kernel/.
@@ -195,12 +208,12 @@ vdso_prepare: prepare0
 	include/generated/vdso-offsets.h arch/arm64/kernel/vdso/vdso.so
 ifdef CONFIG_COMPAT_VDSO
 	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 \
-	include/generated/vdso32-offsets.h arch/arm64/kernel/vdso32/vdso.so
+	arch/arm64/kernel/vdso32/vdso.so
 endif
 endif
 
 vdso-install-y				+= arch/arm64/kernel/vdso/vdso.so.dbg
-vdso-install-$(CONFIG_COMPAT_VDSO)	+= arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
+vdso-install-$(CONFIG_COMPAT_VDSO)	+= arch/arm64/kernel/vdso32/vdso32.so.dbg
 
 include $(srctree)/scripts/Makefile.defconf
 
@@ -211,7 +224,8 @@ virtconfig:
 define archhelp
   echo  '* Image.gz      - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
   echo  '  Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
-  echo  '  install       - Install uncompressed kernel'
+  echo  '  image.fit     - Flat Image Tree (arch/$(ARCH)/boot/image.fit)'
+  echo  '  install       - Install kernel (compressed if COMPRESSED_INSTALL set)'
   echo  '  zinstall      - Install compressed kernel'
   echo  '                  Install using (your) ~/bin/installkernel or'
   echo  '                  (distribution) /sbin/installkernel or'
diff --git a/arch/arm64/boot/.gitignore b/arch/arm64/boot/.gitignore
index af5dc61f8b43..abaae9de1bdd 100644
--- a/arch/arm64/boot/.gitignore
+++ b/arch/arm64/boot/.gitignore
@@ -2,3 +2,4 @@
 Image
 Image.gz
 vmlinuz*
+image.fit
diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile
index 1761f5972443..b5a08333bc57 100644
--- a/arch/arm64/boot/Makefile
+++ b/arch/arm64/boot/Makefile
@@ -16,7 +16,8 @@
 
 OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 
-targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo Image.zst
+targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo \
+	Image.zst Image.xz image.fit
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
@@ -39,12 +40,18 @@ $(obj)/Image.lzo: $(obj)/Image FORCE
 $(obj)/Image.zst: $(obj)/Image FORCE
 	$(call if_changed,zstd)
 
+$(obj)/Image.xz: $(obj)/Image FORCE
+	$(call if_changed,xzkern)
+
+$(obj)/image.fit: $(obj)/Image $(obj)/dts/dtbs-list FORCE
+	$(call if_changed,fit)
+
 EFI_ZBOOT_PAYLOAD	:= Image
 EFI_ZBOOT_BFD_TARGET	:= elf64-littleaarch64
 EFI_ZBOOT_MACH_TYPE	:= ARM64
 EFI_ZBOOT_FORWARD_CFI	:= $(CONFIG_ARM64_BTI_KERNEL)
 
-EFI_ZBOOT_OBJCOPY_FLAGS	= --add-symbol zboot_code_size=0x$(shell \
+EFI_ZBOOT_OBJCOPY_FLAGS	= --add-symbol zboot_code_size=0x$$( \
 				$(NM) vmlinux|grep _kernel_codesize|cut -d' ' -f1)
 
 include $(srctree)/drivers/firmware/efi/libstub/Makefile.zboot
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 30dd6347a929..b0844404eda1 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 subdir-y += actions
+subdir-y += airoha
 subdir-y += allwinner
 subdir-y += altera
 subdir-y += amazon
@@ -8,9 +9,12 @@ subdir-y += amlogic
 subdir-y += apm
 subdir-y += apple
 subdir-y += arm
+subdir-y += axiado
 subdir-y += bitmain
+subdir-y += blaize
 subdir-y += broadcom
 subdir-y += cavium
+subdir-y += cix
 subdir-y += exynos
 subdir-y += freescale
 subdir-y += hisilicon
@@ -26,6 +30,7 @@ subdir-y += realtek
 subdir-y += renesas
 subdir-y += rockchip
 subdir-y += socionext
+subdir-y += sophgo
 subdir-y += sprd
 subdir-y += st
 subdir-y += synaptics
diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
index 63e375cd9eb4..bd54b5165129 100644
--- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
+++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
@@ -24,7 +24,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	memory@1,e0000000 {
+	memory@1e0000000 {
 		device_type = "memory";
 		reg = <0x1 0xe0000000 0x0 0x0>;
 	};
diff --git a/arch/arm64/boot/dts/airoha/Makefile b/arch/arm64/boot/dts/airoha/Makefile
new file mode 100644
index 000000000000..ebea112ce1d7
--- /dev/null
+++ b/arch/arm64/boot/dts/airoha/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_AIROHA) += en7581-evb.dtb
diff --git a/arch/arm64/boot/dts/airoha/en7581-evb.dts b/arch/arm64/boot/dts/airoha/en7581-evb.dts
new file mode 100644
index 000000000000..dae9968a4ff6
--- /dev/null
+++ b/arch/arm64/boot/dts/airoha/en7581-evb.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7581.dtsi"
+
+/ {
+	model = "Airoha EN7581 Evaluation Board";
+	compatible = "airoha,en7581-evb", "airoha,en7581";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x0 0x80200000 0x0 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+};
+
+&spi_nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		bootloader@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		art@200000 {
+			label = "art";
+			reg = <0x00200000 0x00400000>;
+		};
+
+		tclinux@600000 {
+			label = "tclinux";
+			reg = <0x00600000 0x03200000>;
+		};
+
+		tclinux_slave@3800000 {
+			label = "tclinux_alt";
+			reg = <0x03800000 0x03200000>;
+		};
+
+		rootfs_data@6a00000 {
+			label = "rootfs_data";
+			reg = <0x06a00000 0x01400000>;
+		};
+
+		reserved_bmt@7e00000 {
+			label = "reserved_bmt";
+			reg = <0x07e00000 0x00200000>;
+			read-only;
+		};
+	};
+};
+
+&en7581_pinctrl {
+	gpio-ranges = <&en7581_pinctrl 0 13 47>;
+
+	pcie0_rst_pins: pcie0-rst-pins {
+		conf {
+			pins = "pcie_reset0";
+			drive-open-drain = <1>;
+		};
+	};
+
+	pcie1_rst_pins: pcie1-rst-pins {
+		conf {
+			pins = "pcie_reset1";
+			drive-open-drain = <1>;
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_rst_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_rst_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+};
+
+&gdm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/airoha/en7581.dtsi b/arch/arm64/boot/dts/airoha/en7581.dtsi
new file mode 100644
index 000000000000..ff6908a76e8e
--- /dev/null
+++ b/arch/arm64/boot/dts/airoha/en7581.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/en7523-clk.h>
+#include <dt-bindings/reset/airoha,en7581-reset.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		npu-binary@84000000 {
+			no-map;
+			reg = <0x0 0x84000000 0x0 0xa00000>;
+		};
+
+		npu-flag@84b0000 {
+			no-map;
+			reg = <0x0 0x84b00000 0x0 0x100000>;
+		};
+
+		npu-pkt@85000000 {
+			no-map;
+			reg = <0x0 0x85000000 0x0 0x1a00000>;
+		};
+
+		npu-phyaddr@86b00000 {
+			no-map;
+			reg = <0x0 0x86b00000 0x0 0x100000>;
+		};
+
+		npu-rxdesc@86d00000 {
+			no-map;
+			reg = <0x0 0x86d00000 0x0 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	clk20m: clock-20000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@9000000 {
+			compatible = "arm,gic-v3";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x09000000 0x0 0x20000>,
+			      <0x0 0x09080000 0x0 0x80000>,
+			      <0x0 0x09400000 0x0 0x2000>,
+			      <0x0 0x09500000 0x0 0x2000>,
+			      <0x0 0x09600000 0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		spi@1fa10000 {
+			compatible = "airoha,en7581-snand";
+			reg = <0x0 0x1fa10000 0x0 0x140>,
+			      <0x0 0x1fa11000 0x0 0x160>;
+
+			clocks = <&scuclk EN7523_CLK_SPI>;
+			clock-names = "spi";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			spi_nand: nand@0 {
+				compatible = "spi-nand";
+				reg = <0>;
+
+				spi-max-frequency = <50000000>;
+				spi-tx-bus-width = <1>;
+				spi-rx-bus-width = <2>;
+			};
+		};
+
+		scuclk: clock-controller@1fb00000 {
+			compatible = "airoha,en7581-scu";
+			reg = <0x0 0x1fb00000 0x0 0x970>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pbus_csr: syscon@1fbe3400 {
+			compatible = "airoha,en7581-pbus-csr", "syscon";
+			reg = <0x0 0x1fbe3400 0x0 0xff>;
+		};
+
+		pciephy: phy@1fa5a000 {
+			compatible = "airoha,en7581-pcie-phy";
+			reg = <0x0 0x1fa5a000 0x0 0xfff>,
+			      <0x0 0x1fa5b000 0x0 0xfff>,
+			      <0x0 0x1fa5c000 0x0 0xfff>,
+			      <0x0 0x1fc10044 0x0 0x4>,
+			      <0x0 0x1fc30044 0x0 0x4>,
+			      <0x0 0x1fc15030 0x0 0x104>;
+			reg-names = "csr-2l", "pma0", "pma1",
+				    "p0-xr-dtime", "p1-xr-dtime",
+				    "rx-aeq";
+			#phy-cells = <0>;
+		};
+
+		pcie0: pcie@1fc00000 {
+			compatible = "airoha,en7581-pcie";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			reg = <0x0 0x1fc00000 0x0 0x1670>;
+			reg-names = "pcie-mac";
+
+			clocks = <&scuclk EN7523_CLK_PCIE>;
+			clock-names = "sys-ck";
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			ranges = <0x02000000 0 0x20000000 0x0 0x20000000 0 0x4000000>;
+
+			resets = <&scuclk EN7581_PCIE0_RST>,
+				 <&scuclk EN7581_PCIE1_RST>,
+				 <&scuclk EN7581_PCIE2_RST>;
+			reset-names = "phy-lane0", "phy-lane1", "phy-lane2";
+
+			mediatek,pbus-csr = <&pbus_csr 0x0 0x4>;
+
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@1fc20000 {
+			compatible = "airoha,en7581-pcie";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			reg = <0x0 0x1fc20000 0x0 0x1670>;
+			reg-names = "pcie-mac";
+
+			clocks = <&scuclk EN7523_CLK_PCIE>;
+			clock-names = "sys-ck";
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			ranges = <0x02000000 0 0x24000000 0x0 0x24000000 0 0x4000000>;
+
+			resets = <&scuclk EN7581_PCIE0_RST>,
+				 <&scuclk EN7581_PCIE1_RST>,
+				 <&scuclk EN7581_PCIE2_RST>;
+			reset-names = "phy-lane0", "phy-lane1", "phy-lane2";
+
+			mediatek,pbus-csr = <&pbus_csr 0x8 0xc>;
+
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		uart1: serial@1fbf0000 {
+			compatible = "ns16550";
+			reg = <0x0 0x1fbf0000 0x0 0x30>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <1843200>;
+		};
+
+		rng@1faa1000 {
+			compatible = "airoha,en7581-trng";
+			reg = <0x0 0x1faa1000 0x0 0xc04>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		system-controller@1fbf0200 {
+			compatible = "airoha,en7581-gpio-sysctl", "syscon",
+				     "simple-mfd";
+			reg = <0x0 0x1fbf0200 0x0 0xc0>;
+
+			en7581_pinctrl: pinctrl {
+				compatible = "airoha,en7581-pinctrl";
+
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		i2c0: i2c@1fbf8000 {
+			compatible = "mediatek,mt7621-i2c";
+			reg = <0x0 0x1fbf8000 0x0 0x100>;
+
+			resets = <&scuclk EN7581_I2C2_RST>;
+
+			clocks = <&clk20m>;
+			clock-frequency = <100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@1fbf8100 {
+			compatible = "mediatek,mt7621-i2c";
+			reg = <0x0 0x1fbf8100 0x0 0x100>;
+
+			resets = <&scuclk EN7581_I2C_MASTER_RST>;
+
+			clocks = <&clk20m>;
+			clock-frequency = <100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		eth: ethernet@1fb50000 {
+			compatible = "airoha,en7581-eth";
+			reg = <0 0x1fb50000 0 0x2600>,
+			      <0 0x1fb54000 0 0x2000>,
+			      <0 0x1fb56000 0 0x2000>;
+			reg-names = "fe", "qdma0", "qdma1";
+
+			resets = <&scuclk EN7581_FE_RST>,
+				 <&scuclk EN7581_FE_PDMA_RST>,
+				 <&scuclk EN7581_FE_QDMA_RST>,
+				 <&scuclk EN7581_XSI_MAC_RST>,
+				 <&scuclk EN7581_DUAL_HSI0_MAC_RST>,
+				 <&scuclk EN7581_DUAL_HSI1_MAC_RST>,
+				 <&scuclk EN7581_HSI_MAC_RST>,
+				 <&scuclk EN7581_XFP_MAC_RST>;
+			reset-names = "fe", "pdma", "qdma",
+				      "xsi-mac", "hsi0-mac", "hsi1-mac",
+				      "hsi-mac", "xfp-mac";
+
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gdm1: ethernet@1 {
+				compatible = "airoha,eth-mac";
+				reg = <1>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <10000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 3aca6787a167..2edfa7bf4ab3 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -16,7 +16,9 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab-early-adopter.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h64-remix-mini-pc.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a133-liontron-h-a133l.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
@@ -38,8 +40,22 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-x96q.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-longanpi-3h.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-yuzukihd-chameleon.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-2024.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-h.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-a527-cubie-a5e.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-h728-x96qpro+.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-avaota-a1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-orangepi-4a.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
index f5c5c1464482..a7e3be0155a8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
@@ -6,6 +6,9 @@
 /dts-v1/;
 
 #include "sun50i-a100.dtsi"
+#include "sun50i-a100-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
 
 /{
 	model = "Allwinner A100 Perf1";
@@ -20,6 +23,26 @@
 	};
 };
 
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_aldo1>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &pio {
 	vcc-pb-supply = <&reg_dcdc1>;
 	vcc-pc-supply = <&reg_eldo1>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
new file mode 100644
index 000000000000..c6a2efa037dc
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
+// Copyright (c) 2020 ShuoSheng Huang <huangshuosheng@allwinnertech.com>
+
+/ {
+	cpu_opp_table: opp-table-cpu {
+		compatible = "allwinner,sun50i-a100-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+
+		opp-408000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <408000000>;
+
+			opp-microvolt-speed0 = <900000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed2 = <900000>;
+		};
+
+		opp-600000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <600000000>;
+
+			opp-microvolt-speed0 = <900000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed2 = <900000>;
+		};
+
+		opp-816000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <816000000>;
+
+			opp-microvolt-speed0 = <940000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed2 = <900000>;
+		};
+
+		opp-1080000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1080000000>;
+
+			opp-microvolt-speed0 = <1020000>;
+			opp-microvolt-speed1 = <980000>;
+			opp-microvolt-speed2 = <950000>;
+		};
+
+		opp-1200000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1200000000>;
+
+			opp-microvolt-speed0 = <1100000>;
+			opp-microvolt-speed1 = <1020000>;
+			opp-microvolt-speed2 = <1000000>;
+		};
+
+		opp-1320000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1320000000>;
+
+			opp-microvolt-speed0 = <1160000>;
+			opp-microvolt-speed1 = <1060000>;
+			opp-microvolt-speed2 = <1030000>;
+		};
+
+		opp-1464000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1464000000>;
+
+			opp-microvolt-speed0 = <1180000>;
+			opp-microvolt-speed1 = <1180000>;
+			opp-microvolt-speed2 = <1130000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index a3dccf193765..bb5f9e4f3d42 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -23,30 +23,43 @@
 			device_type = "cpu";
 			reg = <0x0>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <0x1>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <0x2>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <0x3>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -92,6 +105,39 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0x3fffffff>;
 
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun50i-a100-system-control",
+				     "allwinner,sun50i-a64-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a1: sram@20000 {
+				compatible = "mmio-sram";
+				reg = <0x00020000 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00020000 0x4000>;
+			};
+
+			sram_c: sram@24000 {
+				compatible = "mmio-sram";
+				reg = <0x024000 0x21000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x024000 0x21000>;
+			};
+
+			sram_a2: sram@100000 {
+				compatible = "mmio-sram";
+				reg = <0x0100000 0x14000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x0100000 0x14000>;
+			};
+		};
+
 		ccu: clock@3001000 {
 			compatible = "allwinner,sun50i-a100-ccu";
 			reg = <0x03001000 0x1000>;
@@ -133,6 +179,18 @@
 			ths_calibration: calib@14 {
 				reg = <0x14 8>;
 			};
+
+			cpu_speed_grade: cpu-speed-grade@1c {
+				reg = <0x1c 0x2>;
+			};
+		};
+
+		watchdog@30090a0 {
+			compatible = "allwinner,sun50i-a100-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x030090a0 0x20>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dcxo24M>;
 		};
 
 		pio: pinctrl@300b000 {
@@ -152,12 +210,101 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC0", "PC1", "PC5", "PC6",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC13", "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			rgmii0_pins: rgmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10",
+				       "PH14", "PH15", "PH16", "PH17", "PH18";
+				function = "emac0";
+				drive-strength = <40>;
+			};
+
+			rmii0_pins: rmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10";
+				function = "emac0";
+				drive-strength = <40>;
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB9", "PB10";
 				function = "uart0";
 			};
 		};
 
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun50i-a100-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun50i-a100-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun50i-a100-emmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		uart0: serial@5000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x05000000 0x400>;
@@ -273,6 +420,26 @@
 			#size-cells = <0>;
 		};
 
+		emac0: ethernet@5020000 {
+			compatible = "allwinner,sun50i-a100-emac",
+				     "allwinner,sun50i-a64-emac";
+			reg = <0x5020000 0x10000>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			syscon = <&syscon>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		ths: thermal-sensor@5070400 {
 			compatible = "allwinner,sun50i-a100-ths";
 			reg = <0x05070400 0x100>;
@@ -285,6 +452,97 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		usb_otg: usb@5100000 {
+			compatible = "allwinner,sun50i-a100-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@5100400 {
+			compatible = "allwinner,sun50i-a100-usb-phy",
+				     "allwinner,sun20i-d1-usb-phy";
+			reg = <0x05100400 0x100>,
+			      <0x05101800 0x100>,
+			      <0x05200800 0x100>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-a100-ehci",
+				     "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-a100-ohci",
+				     "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@5200000 {
+			compatible = "allwinner,sun50i-a100-ehci",
+				     "generic-ehci";
+			reg = <0x05200000 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@5200400 {
+			compatible = "allwinner,sun50i-a100-ohci",
+				     "generic-ohci";
+			reg = <0x05200400 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		r_ccu: clock@7010000 {
 			compatible = "allwinner,sun50i-a100-r-ccu";
 			reg = <0x07010000 0x300>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts b/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts
new file mode 100644
index 000000000000..90a50910f07b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a100.dtsi"
+#include "sun50i-a100-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/{
+	model = "Liontron H-A133L";
+	compatible = "liontron,h-a133l", "allwinner,sun50i-a100";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from a 12V->5V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii0_pins>;
+	phy-handle = <&rmii_phy>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mdio0 {
+	reset-gpios = <&pio 7 12 GPIO_ACTIVE_LOW>; /* PH12 */
+	reset-delay-us = <2000>;
+	reset-post-delay-us = <2000>;
+
+	rmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp803: pmic@34 {
+		compatible = "x-powers,axp803";
+		reg = <0x34>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-codec-avcc";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dram-1";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-pl";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io-usb-pd-emmc";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <810000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-cpux";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-usb-cpus";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <950000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vcc-dram";
+};
+
+/* DCDC6 unused */
+/* DLDO3 unused */
+/* DLDO4 unused */
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pc-emmc";
+};
+
+/* ELDO2 unused */
+/* ELDO3 unused */
+
+&reg_fldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-cpus-usb";
+};
+
+/* reg_drivevbus unused */
+/* dc1sw unused */
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";       /* USB A type receptacle, always powered */
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index e6d5bc0f7a61..d1f415acd7b5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -53,7 +53,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index 0af6dcdf7515..dec9960a7440 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -41,7 +41,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index bfb806cf6d7a..fd3794678c33 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -52,7 +52,7 @@
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index 4f8529d5ac00..c8303a66438d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -68,7 +68,7 @@
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
index 596a25907432..709fe650a360 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
@@ -5,7 +5,7 @@
 #include "sun50i-a64-sopine-baseboard.dts"
 
 / {
-	model = "Pine64 LTS";
+	model = "Pine64 PINE A64 LTS";
 	compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
 		     "allwinner,sun50i-a64";
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
index b54099b654c8..026d843cd7e0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -4,7 +4,7 @@
 #include "sun50i-a64-pine64.dts"
 
 / {
-	model = "Pine64+";
+	model = "Pine64 PINE A64+";
 	compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
 
 	/* TODO: Camera, touchscreen, etc. */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 2accb5ddf783..3256acec1ff9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -9,7 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Pine64";
+	model = "Pine64 PINE A64";
 	compatible = "pine64,pine64", "allwinner,sun50i-a64";
 
 	aliases {
@@ -124,6 +124,17 @@
 	status = "okay";
 };
 
+/* On Wifi/BT connector */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "disabled";
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -286,6 +297,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 50ed2e9f10ed..86d44349e095 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -13,7 +13,7 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	model = "Pinebook";
+	model = "Pine64 Pinebook";
 	compatible = "pine64,pinebook", "allwinner,sun50i-a64";
 	chassis-type = "laptop";
 
@@ -79,7 +79,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};
@@ -390,6 +390,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 87847116ab6d..4bc6c1ef2cde 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -39,25 +39,35 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led-0 {
+		led0: led-0 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+			retain-state-suspended;
 		};
 
-		led-1 {
+		led1: led-1 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+			retain-state-suspended;
 		};
 
-		led-2 {
+		led2: led-2 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_RED>;
 			gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+			retain-state-suspended;
 		};
 	};
 
+	multi-led {
+		compatible = "leds-group-multicolor";
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_INDICATOR;
+		leds = <&led0>, <&led1>, <&led2>;
+	};
+
 	reg_ps: ps-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "ps";
@@ -178,12 +188,30 @@
 &i2c1 {
 	status = "okay";
 
+	/* Alternative magnetometer */
+	af8133j: magnetometer@1c {
+		compatible = "voltafield,af8133j";
+		reg = <0x1c>;
+		reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>;
+		avdd-supply = <&reg_dldo1>;
+		dvdd-supply = <&reg_dldo1>;
+		mount-matrix = "0", "-1", "0",
+				"-1", "0", "0",
+				"0", "0", "-1";
+
+		/* status will be fixed up in firmware */
+		status = "disabled";
+	};
+
 	/* Magnetometer */
 	lis3mdl: magnetometer@1e {
 		compatible = "st,lis3mdl-magn";
 		reg = <0x1e>;
 		vdd-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_dldo1>;
+		mount-matrix = "0", "1", "0",
+				"-1", "0", "0",
+				"0", "0", "1";
 	};
 
 	/* Light/proximity sensor */
@@ -202,6 +230,9 @@
 		interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
 		vdd-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_dldo1>;
+		mount-matrix = "0", "1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "1";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts
index 6265360ce623..86cc85eb3d48 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts
@@ -9,7 +9,7 @@
 #include "sun50i-a64-pinetab.dts"
 
 / {
-	model = "PineTab, Early Adopter's version";
+	model = "Pine64 PineTab Early Adopter";
 	compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
index 0a5607f73049..f5fb1ee32dad 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
@@ -14,7 +14,7 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	model = "PineTab, Development Sample";
+	model = "Pine64 PineTab Developer Sample";
 	compatible = "pine64,pinetab", "allwinner,sun50i-a64";
 	chassis-type = "tablet";
 
@@ -98,7 +98,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 		post-power-on-delay-ms = <200>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index 5e66ce1a334f..231e652cab67 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -8,7 +8,7 @@
 #include "sun50i-a64-sopine.dtsi"
 
 / {
-	model = "SoPine with baseboard";
+	model = "Pine64 SOPINE on Baseboard carrier board";
 	compatible = "pine64,sopine-baseboard", "pine64,sopine",
 		     "allwinner,sun50i-a64";
 
@@ -103,6 +103,17 @@
 	};
 };
 
+/* On Wifi/BT connector */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "disabled";
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
@@ -175,6 +186,14 @@
 	status = "okay";
 };
 
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
 /* On Pi-2 connector */
 &uart2 {
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index 1128030e4c25..ec055510af8b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -74,7 +74,7 @@
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};
@@ -369,6 +369,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 57ac18738c99..0fecf0abb204 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -51,10 +51,16 @@
 			device_type = "cpu";
 			reg = <0>;
 			enable-method = "psci";
-			next-level-cache = <&L2>;
 			clocks = <&ccu CLK_CPUX>;
 			clock-names = "cpu";
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu1: cpu@1 {
@@ -62,10 +68,16 @@
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
-			next-level-cache = <&L2>;
 			clocks = <&ccu CLK_CPUX>;
 			clock-names = "cpu";
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu2: cpu@2 {
@@ -73,10 +85,16 @@
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
-			next-level-cache = <&L2>;
 			clocks = <&ccu CLK_CPUX>;
 			clock-names = "cpu";
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu3: cpu@3 {
@@ -84,16 +102,25 @@
 			device_type = "cpu";
 			reg = <3>;
 			enable-method = "psci";
-			next-level-cache = <&L2>;
 			clocks = <&ccu CLK_CPUX>;
 			clock-names = "cpu";
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
-		L2: l2-cache {
+		l2_cache: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -107,27 +134,19 @@
 	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
-		opp-120000000 {
-			opp-hz = /bits/ 64 <120000000>;
-		};
-
-		opp-312000000 {
-			opp-hz = /bits/ 64 <312000000>;
-		};
-
 		opp-432000000 {
 			opp-hz = /bits/ 64 <432000000>;
 		};
 	};
 
-	osc24M: osc24M_clk {
+	osc24M: osc24M-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 		clock-output-names = "osc24M";
 	};
 
-	osc32k: osc32k_clk {
+	osc32k: osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -216,21 +235,21 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_alert1: cpu_alert1 {
+				cpu_alert1: cpu-alert1 {
 					/* milliCelsius */
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -244,6 +263,14 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
+
+			trips {
+				gpu0_crit: gpu0-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
 		gpu1_thermal: gpu1-thermal {
@@ -251,6 +278,14 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 2>;
+
+			trips {
+				gpu1_crit: gpu1-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -410,6 +445,8 @@
 			clock-names = "ahb", "tcon-ch0";
 			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
+			assigned-clocks = <&ccu CLK_TCON0>;
+			assigned-clock-parents = <&ccu CLK_PLL_MIPI>;
 			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
 			reset-names = "lcd", "lvds";
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
new file mode 100644
index 000000000000..7906b79c0389
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Tanix TX1";
+	compatible = "oranth,tanix-tx1", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &sdio_wifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key {
+			label = "hidden";
+			linux,code = <BTN_0>;
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+			default-state = "on";
+		};
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	bus-width = <8>;
+	non-removable;
+	max-frequency = <100000000>;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL, so needs to be always on. */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1120000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";       /* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
new file mode 100644
index 000000000000..b2275eb3d55b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "X96Q";
+	compatible = "amediatech,x96q", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 7 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+/* TODO: EMAC1 connected to AC200 PHY */
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc0 {
+	/* microSD */
+	vmmc-supply = <&reg_aldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* TODO: XRadio XR819 WLAN @ mmc1 */
+
+&mmc2 {
+	/* eMMC */
+	vmmc-supply = <&reg_aldo1>;
+	vqmmc-supply = <&reg_bldo1>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <100000000>; /* required for stable operation */
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp305: pmic@36 {
+		compatible = "x-powers,axp305", "x-powers,axp805",
+			     "x-powers,axp806";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x36>;
+
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			dcdcb {
+				/* unused */
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+
+			dcdce {
+				/* unused */
+			};
+
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			aldo2 {
+				/* unused */
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			bldo2 {
+				/* unused */
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			cldo1 {
+				/* unused */
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptacle */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index 4c3921ac236c..18fa541795a6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -45,16 +45,40 @@
 		startup-delay-us = <100000>;
 		enable-active-high;
 		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	reg_gmac_2v5: gmac-2v5 {
+		/* 2V5 supply for GMAC PHY IO */
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-2v5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board 5V supply from micro USB or pin headers */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 	};
 
 	reg_vcc3v3: vcc3v3 {
+		/* board 3V3 supply by SY8089A */
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
 	};
 
 	vdd_cpux: gpio-regulator {
+		/* cpu voltage regulator MP2143DJ */
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-cpux";
 		regulator-type = "voltage";
@@ -66,9 +90,10 @@
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
 		gpios-states = <0x1>;
 		states = <1100000 0>, <1300000 1>;
+		vin-supply = <&reg_vcc5v>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		post-power-on-delay-ms = <200>;
@@ -111,6 +136,7 @@
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
 	status = "okay";
 };
 
@@ -146,6 +172,18 @@
 	status = "okay";
 };
 
+&pio {
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pd-supply = <&reg_gmac_2v5>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_vcc3v3>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
index 05486cccee1c..128295f5a5d6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -88,6 +88,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
index a3e040da38a0..44fdc8b3f79d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
@@ -103,7 +103,7 @@
 		states = <1100000 0x0>, <1300000 0x1>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		post-power-on-delay-ms = <200>;
@@ -157,6 +157,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
@@ -170,7 +171,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8189etv: sdio_wifi@1 {
+	rtl8189etv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index ce3ae19e72db..0f29da7d51e6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -153,6 +153,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index d7f8bad6bb98..d4fc4e60e4e7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -85,7 +85,7 @@
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
 	};
@@ -153,6 +153,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
index 7ec5ac850a0d..3322cc4d9aa4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -82,6 +82,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
@@ -97,7 +98,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index 22530ace12d5..3eb986c354a9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -52,7 +52,7 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
 		post-power-on-delay-ms = <200>;
@@ -79,6 +79,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index d3caf27b6a55..01a29c1988a6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -16,7 +16,6 @@
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -26,7 +25,6 @@
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -36,7 +34,6 @@
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -46,7 +43,6 @@
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 	};
@@ -207,7 +203,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu_hot_trip>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 9ec49ac2f6fd..2c64d834a2c4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -34,7 +34,7 @@
 		};
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -129,6 +129,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -151,28 +152,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	linux,rc-map-name = "rc-beelink-gs1";
-	status = "okay";
-};
-
-&r_pio {
-	/*
-	 * FIXME: We can't add that supply for now since it would
-	 * create a circular dependency between pinctrl, the regulator
-	 * and the RSB Bus.
-	 *
-	 * vcc-pl-supply = <&reg_aldo1>;
-	 */
-	vcc-pm-supply = <&reg_aldo1>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -290,7 +275,25 @@
 	};
 };
 
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * PL0 and PL1 are used for PMIC I2C
+	 * don't enable the pl-supply else
+	 * it will fail at boot
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 6fc65e8db220..dc7381c944c9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -33,7 +33,7 @@
 		};
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -131,6 +131,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -143,7 +144,7 @@
 	non-removable;
 	status = "okay";
 
-	brcm: sdio-wifi@1 {
+	brcm: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&r_pio>;
@@ -175,16 +176,12 @@
 	vcc-pg-supply = <&reg_vcc_wifi_io>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -295,6 +292,10 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
index fb31dcb1cb6d..0911c537cc6b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -11,7 +11,7 @@
 		serial1 = &uart1; /* BT-UART */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
@@ -28,7 +28,7 @@
 	non-removable;
 	status = "okay";
 
-	brcm: sdio-wifi@1 {
+	brcm: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&r_pio>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index 92745128fcfe..e34dbb992021 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -32,7 +32,7 @@
 		};
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -94,6 +94,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -112,20 +113,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_pio {
-	vcc-pm-supply = <&reg_bldo3>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -240,6 +233,14 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
index b710f1a0f53a..066fbeff8bfa 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
@@ -5,13 +5,13 @@
 
 #include "sun50i-h6-pine-h64.dts"
 
+/delete-node/ &reg_gmac_3v3;
+
 / {
-	model = "Pine H64 model B";
+	model = "Pine64 PINE H64 Model B";
 	compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
 
-	/delete-node/ reg_gmac_3v3;
-
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
 		post-power-on-delay-ms = <200>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 1ffd68f43f87..fa7a765ee828 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -9,7 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Pine H64 model A";
+	model = "Pine64 PINE H64 Model A";
 	compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
 
 	aliases {
@@ -22,7 +22,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -133,6 +133,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
index 4903d6358112..bb7de37c0d58 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -124,6 +124,7 @@
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -166,6 +167,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index ca1d287a0a01..73e8604315c5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -27,8 +27,14 @@
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu1: cpu@1 {
@@ -37,8 +43,14 @@
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu2: cpu@2 {
@@ -47,8 +59,14 @@
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu3: cpu@3 {
@@ -57,8 +75,23 @@
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -68,7 +101,7 @@
 		status = "disabled";
 	};
 
-	osc24M: osc24M_clk {
+	osc24M: osc24M-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
@@ -406,6 +439,7 @@
 				function = "spi1";
 			};
 
+			/omit-if-no-ref/
 			spdif_tx_pin: spdif-tx-pin {
 				pins = "PH7";
 				function = "spdif";
@@ -655,10 +689,8 @@
 			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
 			clock-names = "apb", "spdif";
 			resets = <&ccu RST_BUS_SPDIF>;
-			dmas = <&dma 2>;
-			dma-names = "tx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spdif_tx_pin>;
+			dmas = <&dma 2>, <&dma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
index dbce61b355d6..4bfb52609c94 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
  */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
index 1fed2b46cfe8..bebfeb2a337a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
  */
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -62,6 +63,15 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dldo1>;
 	/* Card detection pin is not connected */
@@ -93,7 +103,7 @@
 		interrupt-controller;
 		#interrupt-cells = <1>;
 
-		regulators{
+		regulators {
 			reg_dcdc1: dcdc1 {
 				regulator-name = "vdd-gpu-sys";
 				regulator-min-microvolt = <810000>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
index 832f08b2b260..ff84a3794470 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2023 Martin Botka <martin@biqu3d.com>.
  */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi
new file mode 100644
index 000000000000..dd10aaf472b6
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2023 Martin Botka <martin@somainline.org>
+
+/ {
+	cpu_opp_table: opp-table-cpu {
+		compatible = "allwinner,sun50i-h616-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x3f>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x12>;
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x2d>;
+		};
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed4 = <940000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x12>;
+		};
+
+		opp-936000000 {
+			opp-hz = /bits/ 64 <936000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x0d>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt-speed0 = <950000>;
+			opp-microvolt-speed1 = <940000>;
+			opp-microvolt-speed2 = <950000>;
+			opp-microvolt-speed3 = <950000>;
+			opp-microvolt-speed4 = <1020000>;
+			opp-microvolt-speed5 = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x3f>;
+		};
+
+		opp-1032000000 {
+			opp-hz = /bits/ 64 <1032000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x20>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt-speed0 = <1000000>;
+			opp-microvolt-speed2 = <1000000>;
+			opp-microvolt-speed3 = <1000000>;
+			opp-microvolt-speed5 = <950000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x2d>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt-speed0 = <1050000>;
+			opp-microvolt-speed1 = <1020000>;
+			opp-microvolt-speed2 = <1050000>;
+			opp-microvolt-speed3 = <1050000>;
+			opp-microvolt-speed4 = <1100000>;
+			opp-microvolt-speed5 = <1020000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x3f>;
+		};
+
+		opp-1320000000 {
+			opp-hz = /bits/ 64 <1320000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x1d>;
+		};
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x2d>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt-speed1 = <1100000>;
+			opp-microvolt-speed3 = <1100000>;
+			opp-microvolt-speed5 = <1160000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x2a>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
index 15290e6892fc..a8644fb52b04 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -59,6 +59,11 @@
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -68,10 +73,11 @@
 &emac0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
-	phy-mode = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
-	allwinner,rx-delay-ps = <3100>;
-	allwinner,tx-delay-ps = <700>;
+	status = "okay";
+};
+
+&gpu {
 	status = "okay";
 };
 
@@ -84,6 +90,7 @@
 
 &mmc0 {
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
index d83852e72f06..f2e3300e078a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -6,16 +6,28 @@
 /dts-v1/;
 
 #include "sun50i-h616-orangepi-zero.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 / {
 	model = "OrangePi Zero2";
 	compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
 &emac0 {
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	phy-mode = "rgmii";
 	phy-supply = <&reg_dcdce>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdce>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
index 959b6fd18483..085f3e4e8eaa 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -32,6 +33,15 @@
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -40,6 +50,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
@@ -47,6 +62,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_dcdce>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
index d549d277d972..ceedae9e399b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/reset/sun50i-h616-ccu.h>
 #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -25,6 +26,14 @@
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu1: cpu@1 {
@@ -33,6 +42,14 @@
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu2: cpu@2 {
@@ -41,6 +58,14 @@
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu3: cpu@3 {
@@ -49,6 +74,23 @@
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};
 
@@ -108,6 +150,31 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x40000000>;
 
+		gpu: gpu@1800000 {
+			compatible = "allwinner,sun50i-h616-mali",
+				     "arm,mali-bifrost";
+			reg = <0x1800000 0x40000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU0>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			power-domains = <&prcm_ppu 2>;
+			resets = <&ccu RST_BUS_GPU>;
+			status = "disabled";
+		};
+
+		crypto: crypto@1904000 {
+			compatible = "allwinner,sun50i-h616-crypto";
+			reg = <0x01904000 0x800>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>,
+				 <&ccu CLK_MBUS_CE>, <&rtc CLK_IOSC>;
+			clock-names = "bus", "mod", "ram", "trng";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
 		syscon: syscon@3000000 {
 			compatible = "allwinner,sun50i-h616-system-control";
 			reg = <0x03000000 0x1000>;
@@ -133,11 +200,32 @@
 			#reset-cells = <1>;
 		};
 
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun50i-h616-dma",
+				     "allwinner,sun50i-a100-dma";
+			reg = <0x03002000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			dma-channels = <16>;
+			dma-requests = <49>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
 		sid: efuse@3006000 {
 			compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid";
 			reg = <0x03006000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x8>;
+			};
+
+			cpu_speed_grade: cpu-speed-grade@0 {
+				reg = <0x0 2>;
+			};
 		};
 
 		watchdog: watchdog@30090a0 {
@@ -176,7 +264,7 @@
 			};
 
 			i2c0_pins: i2c0-pins {
-				pins = "PI6", "PI7";
+				pins = "PI5", "PI6";
 				function = "i2c0";
 			};
 
@@ -240,6 +328,11 @@
 				function = "spi1";
 			};
 
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH4";
+				function = "spdif";
+			};
+
 			uart0_ph_pins: uart0-ph-pins {
 				pins = "PH0", "PH1";
 				function = "uart0";
@@ -256,6 +349,12 @@
 				pins = "PG8", "PG9";
 				function = "uart1";
 			};
+
+			/omit-if-no-ref/
+			x32clk_fanout_pin: x32clk-fanout-pin {
+				pins = "PG10";
+				function = "clock";
+			};
 		};
 
 		gic: interrupt-controller@3021000 {
@@ -269,6 +368,15 @@
 			#interrupt-cells = <3>;
 		};
 
+		iommu: iommu@30f0000 {
+			compatible = "allwinner,sun50i-h616-iommu";
+			reg = <0x030f0000 0x10000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_IOMMU>;
+			resets = <&ccu RST_BUS_IOMMU>;
+			#iommu-cells = <1>;
+		};
+
 		mmc0: mmc@4020000 {
 			compatible = "allwinner,sun50i-h616-mmc",
 				     "allwinner,sun50i-a100-mmc";
@@ -339,6 +447,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART0>;
+			dmas = <&dma 14>, <&dma 14>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
@@ -350,6 +460,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART1>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
@@ -361,6 +473,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART2>;
+			dmas = <&dma 16>, <&dma 16>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART2>;
 			status = "disabled";
 		};
@@ -372,6 +486,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART3>;
+			dmas = <&dma 17>, <&dma 17>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART3>;
 			status = "disabled";
 		};
@@ -383,6 +499,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART4>;
+			dmas = <&dma 18>, <&dma 18>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART4>;
 			status = "disabled";
 		};
@@ -394,6 +512,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART5>;
+			dmas = <&dma 19>, <&dma 19>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART5>;
 			status = "disabled";
 		};
@@ -405,6 +525,8 @@
 			reg = <0x05002000 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C0>;
+			dmas = <&dma 43>, <&dma 43>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c0_pins>;
@@ -420,6 +542,8 @@
 			reg = <0x05002400 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C1>;
+			dmas = <&dma 44>, <&dma 44>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C1>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -433,6 +557,8 @@
 			reg = <0x05002800 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
+			dmas = <&dma 45>, <&dma 45>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C2>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -446,6 +572,8 @@
 			reg = <0x05002c00 0x400>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C3>;
+			dmas = <&dma 46>, <&dma 46>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C3>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -459,6 +587,8 @@
 			reg = <0x05003000 0x400>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C4>;
+			dmas = <&dma 47>, <&dma 47>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C4>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -472,6 +602,8 @@
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_SPI0>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -485,6 +617,8 @@
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_SPI1>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -511,6 +645,69 @@
 			};
 		};
 
+		gpadc: adc@5070000 {
+			compatible = "allwinner,sun50i-h616-gpadc",
+				     "allwinner,sun20i-d1-gpadc";
+			reg = <0x05070000 0x400>;
+			clocks = <&ccu CLK_BUS_GPADC>;
+			resets = <&ccu RST_BUS_GPADC>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#io-channel-cells = <1>;
+		};
+
+		ths: thermal-sensor@5070400 {
+			compatible = "allwinner,sun50i-h616-ths";
+			reg = <0x05070400 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			allwinner,sram = <&syscon>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		lradc: lradc@5070800 {
+			compatible = "allwinner,sun50i-h616-lradc",
+				     "allwinner,sun50i-r329-lradc";
+			reg = <0x05070800 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_KEYADC>;
+			resets = <&ccu RST_BUS_KEYADC>;
+			status = "disabled";
+		};
+
+		spdif: spdif@5093000 {
+			compatible = "allwinner,sun50i-h616-spdif";
+			reg = <0x05093000 0x400>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			resets = <&ccu RST_BUS_SPDIF>;
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		codec: codec@5096000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h616-codec";
+			reg = <0x05096000 0x31c>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_AUDIO_CODEC>,
+				 <&ccu CLK_AUDIO_CODEC_1X>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_AUDIO_CODEC>;
+			dmas = <&dma 6>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
 		usbotg: usb@5100000 {
 			compatible = "allwinner,sun50i-h616-musb",
 				     "allwinner,sun8i-h3-musb";
@@ -692,6 +889,21 @@
 			#reset-cells = <1>;
 		};
 
+		prcm_ppu: power-controller@7010250 {
+			compatible = "allwinner,sun50i-h616-prcm-ppu";
+			reg = <0x07010250 0x10>;
+			#power-domain-cells = <1>;
+		};
+
+		nmi_intc: interrupt-controller@7010320 {
+			compatible = "allwinner,sun50i-h616-nmi",
+				     "allwinner,sun9i-a80-nmi";
+			reg = <0x07010320 0xc>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		r_pio: pinctrl@7022000 {
 			compatible = "allwinner,sun50i-h616-r-pinctrl";
 			reg = <0x07022000 0x400>;
@@ -734,7 +946,11 @@
 			reg = <0x07081400 0x400>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&r_ccu CLK_R_APB2_I2C>;
+			dmas = <&dma 48>, <&dma 48>;
+			dma-names = "rx", "tx";
 			resets = <&r_ccu RST_R_APB2_I2C>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -755,4 +971,74 @@
 			#size-cells = <0>;
 		};
 	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <500>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths 2>;
+			sustainable-power = <1000>;
+
+			trips {
+				cpu_threshold: cpu-trip-0 {
+					temperature = <60000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+				cpu_target: cpu-trip-1 {
+					temperature = <70000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+				cpu_critical: cpu-trip-2 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <500>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths 0>;
+			sustainable-power = <1100>;
+
+			trips {
+				gpu_temp_critical: gpu-trip-0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+
+		ve-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+
+			trips {
+				ve_temp_critical: ve-trip-0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 3>;
+
+			trips {
+				ddr_temp_critical: ddr-trip-0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
new file mode 100644
index 000000000000..3f416d129b72
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-1v8-pll";
+			};
+
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-io";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts
new file mode 100644
index 000000000000..16c68177ff69
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) Jisheng Zhang <jszhang@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h618-longan-module-3h.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Sipeed Longan Pi 3H";
+	compatible = "sipeed,longan-pi-3h", "sipeed,longan-module-3h", "allwinner,sun50i-h618";
+
+	aliases {
+		ethernet0 = &emac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&pio 6 4 GPIO_ACTIVE_LOW>; /* PG4 */
+		};
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
+	};
+};
+
+&axp313 {
+	vin1-supply = <&reg_vcc5v>;
+	vin2-supply = <&reg_vcc5v>;
+	vin3-supply = <&reg_vcc5v>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+/* WiFi & BT combo module is connected to this Host */
+&ehci3 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&emac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	phy-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	disable-wp;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;	/* PF6 */
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	usb2_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
new file mode 100644
index 000000000000..b340bbcb710d
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "OrangePi Zero 2W";
+	compatible = "xunlong,orangepi-zero2w", "allwinner,sun50i-h618";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* SY8089 DC/DC converter */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		regulator-always-on;
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on the FPC connector (or the exansion board) */
+
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;	/* internally via VCC-IO */
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;	/* internally via VCC-IO */
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>;	/* PC9 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL and DRAM */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&spi0  {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
index 00fe28caac93..c51d4d9120de 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -6,13 +6,20 @@
 /dts-v1/;
 
 #include "sun50i-h616-orangepi-zero.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 / {
 	model = "OrangePi Zero3";
 	compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &emac0 {
+	allwinner,tx-delay-ps = <700>;
+	phy-mode = "rgmii-rxid";
 	phy-supply = <&reg_dldo1>;
 };
 
@@ -20,6 +27,10 @@
 	motorcomm,clk-out-frequency-hz = <125000000>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+};
+
 &mmc0 {
 	/*
 	 * The schematic shows the card detect pin wired up to PF6, via an
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
new file mode 100644
index 000000000000..efe0faa252f5
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Transpeed 8K618-T";
+	compatible = "transpeed,8k618-t", "allwinner,sun50i-h618";
+
+	aliases {
+		ethernet1 = &sdio_wifi;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* discrete 3.3V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dldo1>;
+	cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>;	/* PI16 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-1v8-pll";
+			};
+
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-io-mmc";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1360000>;
+				regulator-max-microvolt = <1360000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_dldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts
new file mode 100644
index 000000000000..eae56908b9b4
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2024 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Yuzuki Chameleon";
+	compatible = "yuzukihd,chameleon", "allwinner,sun50i-h618";
+
+	aliases {
+		ethernet1 = &sdio_wifi;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; /* PG11 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
+	vmmc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 12 IRQ_TYPE_LEVEL_LOW>;  /* PG12 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-3_3v;
+	non-removable;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;	/* via VCC_IO */
+	vcc-pg-supply = <&reg_dldo1>;
+	vcc-ph-supply = <&reg_dldo1>;	/* via VCC_IO */
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 2 IRQ_TYPE_LEVEL_LOW>;	/* PC2 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL, so needs to be always on. */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+/* Connected to the Bluetooth UART pins of the XR829 Wifi/BT chip. */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb1_vbus-supply = <&reg_vcc5v>;
+	usb2_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h64-remix-mini-pc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h64-remix-mini-pc.dts
new file mode 100644
index 000000000000..ce90327e1b2e
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h64-remix-mini-pc.dts
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2023 ARM Ltd.
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Remix Mini PC";
+	compatible = "jide,remix-mini-pc", "allwinner,sun50i-h64",
+		     "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet1 = &rtl8723bs;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc5v: regulator-5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+/* Connects to the AC200 chip */
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c0_pins {
+	bias-pull-up;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <8>;
+	non-removable;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_dcdc1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * We cannot add that supply for now since it would create a circular
+	 * dependency between pinctrl, the regulator and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin5-supply = <&reg_vcc5v>;
+		vin6-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		dldoin-supply = <&reg_vcc5v>;
+		eldoin-supply = <&reg_vcc5v>;
+		fldoin-supply = <&reg_vcc5v>;
+		drivevbus-supply = <&reg_vcc5v>;
+		ips-supply = <&reg_vcc5v>;
+
+		status = "okay";
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/* Deviates from the reset default of 1.1V. */
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+	/* Specifying R_PIO consumer would create circular dependency. */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+/* AC200 power supply */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ave-33";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-cpvdd-dram-emmc";
+};
+
+/* Supplies the arisc management core, needed by TF-A to power off cores. */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dcdc1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>;
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"MIC2", "Microphone Jack";
+	status = "okay";
+};
+
+/* On the (unpopulated) UART pads. */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		max-speed = <1500000>;
+	};
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
new file mode 100644
index 000000000000..1a750c5f6fac
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Anbernic RG35XX 2024";
+	chassis-type = "handset";
+	compatible = "anbernic,rg35xx-2024", "allwinner,sun50i-h700";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <1024000>;
+		voltage-max-design-microvolt = <4200000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys_gamepad: gpio-keys-gamepad {
+		compatible = "gpio-keys";
+
+		button-a {
+			label = "Action-Pad A";
+			gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			label = "Action-Pad B";
+			gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			label = "D-Pad Down";
+			gpios = <&pio 4 0 GPIO_ACTIVE_LOW>; /* PE0 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			label = "Key L1";
+			gpios = <&pio 0 10 GPIO_ACTIVE_LOW>; /* PA10 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			label = "Key L2";
+			gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			label = "D-Pad left";
+			gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-menu {
+			label = "Key Menu";
+			gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_MODE>;
+		};
+
+		button-r1 {
+			label = "Key R1";
+			gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			label = "Key R2";
+			gpios = <&pio 0 7 GPIO_ACTIVE_LOW>; /* PA7 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_TR2>;
+		};
+
+		button-right {
+			label = "D-Pad Right";
+			gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			label = "Key Select";
+			gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_SELECT>;
+		};
+		button-start {
+			label = "Key Start";
+			gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_START>;
+		};
+
+		button-up {
+			label = "D-Pad Up";
+			gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			label = "Action-Pad X";
+			gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			label = "Action Pad Y";
+			gpios = <&pio 0 2 GPIO_ACTIVE_LOW>; /* PA2 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio-keys-volume {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-vol-up {
+			label = "Key Volume Up";
+			gpios = <&pio 4 1 GPIO_ACTIVE_LOW>; /* PE1 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-vol-down {
+			label = "Key Volume Down";
+			gpios = <&pio 4 2 GPIO_ACTIVE_LOW>; /* PE2 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 8 12 GPIO_ACTIVE_HIGH>; /* PI12 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>; /* PI11 */
+		};
+	};
+
+	reg_vcc5v: regulator-vcc5v { /* USB-C power input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&codec {
+	/* Both speakers and headphone jack connected to 74HC4052D analog mux*/
+	allwinner,audio-routing = "Speaker", "LINEOUT",
+				  "Headphone", "LINEOUT";
+	allwinner,pa-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; // PI5
+	hp-det-gpios = <&pio 8 3 GPIO_ACTIVE_HIGH>; // PI3
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc1>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	disable-wp;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;  /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_cldo3>;
+	vcc-pc-supply = <&reg_cldo3>;
+	vcc-pe-supply = <&reg_cldo3>;
+	vcc-pf-supply = <&reg_cldo3>;
+	vcc-pg-supply = <&reg_aldo4>;
+	vcc-ph-supply = <&reg_cldo3>;
+	vcc-pi-supply = <&reg_cldo3>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp717: pmic@34 {
+		compatible = "x-powers,axp717";
+		reg = <0x34>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+
+		axp_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery_power: battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			monitored-battery = <&battery>;
+			x-powers,no-thermistor;
+		};
+
+		regulators {
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <940000>;
+				regulator-max-microvolt = <940000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_aldo1: aldo1 {
+				/* 1.8v - unused */
+			};
+
+			reg_aldo2: aldo2 {
+				/* 1.8v - unused */
+			};
+
+			reg_aldo3: aldo3 {
+				/* 1.8v - unused */
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				/* 1.8v - unused */
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll";
+			};
+
+			reg_bldo3: bldo3 {
+				/* 2.8v - unused */
+			};
+
+			reg_bldo4: bldo4 {
+				/* 1.2v - unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-spkr-amp";
+			};
+
+			reg_cldo2: cldo2 {
+				/* 3.3v - unused */
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_boost: boost {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5200000>;
+				regulator-name = "boost";
+			};
+
+			/*
+			 * Regulator function is unknown, but reading
+			 * GPIO values in bootloader is inconsistent
+			 * on reboot if this is disabled. Setting to
+			 * default value from regulator OTP mem.
+			 */
+			reg_cpusldo: cpusldo {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+			};
+		};
+
+		usb_power: usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+			input-current-limit-microamp = <1500000>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+/* the AXP717 has USB type-C role switch functionality, not yet described by the binding */
+&usbotg {
+	dr_mode = "peripheral";   /* USB type-C receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
new file mode 100644
index 000000000000..bef4d107482f
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>.
+ */
+
+#include "sun50i-h700-anbernic-rg35xx-plus.dts"
+
+/ {
+	model = "Anbernic RG35XX H";
+	compatible = "anbernic,rg35xx-h", "allwinner,sun50i-h700";
+
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&adc_mux 0>,
+			      <&adc_mux 1>,
+			      <&adc_mux 2>,
+			      <&adc_mux 3>;
+		pinctrl-0 = <&joy_mux_pin>;
+		pinctrl-names = "default";
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <4096 0>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <0 4096>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <0 4096>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <4096 0>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	adc_mux: adc-mux {
+		compatible = "io-channel-mux";
+		channels = "left_x", "left_y", "right_x", "right_y";
+		#io-channel-cells = <1>;
+		io-channels = <&gpadc 0>;
+		io-channel-names = "parent";
+		mux-controls = <&gpio_mux>;
+		settle-time-us = <100>;
+	};
+
+	gpio_mux: mux-controller {
+		compatible = "gpio-mux";
+		mux-gpios = <&pio 8 1 GPIO_ACTIVE_LOW>,
+			    <&pio 8 2 GPIO_ACTIVE_LOW>;
+		#mux-control-cells = <0>;
+	};
+
+	reg_vcc3v8_usb: regulator-vcc3v8-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pio 4 5 GPIO_ACTIVE_HIGH>; /* PE5 */
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc3v8-usb";
+	};
+
+	reg_vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pio 8 7 GPIO_ACTIVE_HIGH>; /* PI7 */
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0-usb";
+		vin-supply = <&reg_vcc3v8_usb>;
+	};
+};
+
+&gpadc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	channel@0 {
+		reg = <0>;
+	};
+};
+
+&gpio_keys_gamepad {
+	button-thumbl {
+		label = "GPIO Thumb Left";
+		gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+		linux,input-type = <EV_KEY>;
+		linux,code = <BTN_THUMBL>;
+	};
+
+	button-thumbr {
+		label = "GPIO Thumb Right";
+		gpios = <&pio 4 9 GPIO_ACTIVE_LOW>; /* PE9 */
+		linux,input-type = <EV_KEY>;
+		linux,code = <BTN_THUMBR>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	joy_mux_pin: joy-mux-pin {
+		pins = "PI0";
+		function = "gpio_out";
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0_usb>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts
new file mode 100644
index 000000000000..60a8e4922103
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ */
+
+#include "sun50i-h700-anbernic-rg35xx-2024.dts"
+
+/ {
+	model = "Anbernic RG35XX Plus";
+	compatible = "anbernic,rg35xx-plus", "allwinner,sun50i-h700";
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+	};
+};
+
+/* SDIO WiFi RTL8821CS */
+&mmc1 {
+	vmmc-supply = <&reg_cldo4>;
+	vqmmc-supply = <&reg_aldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 15 IRQ_TYPE_LEVEL_LOW>; /* PG15 */
+		interrupt-names = "host-wake";
+	};
+};
+
+/* Bluetooth RTL8821CS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
+		enable-gpios = <&pio 6 19 GPIO_ACTIVE_HIGH>; /* PG19 */
+		host-wake-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16 */
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts
new file mode 100644
index 000000000000..0cf16dc903cd
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>.
+ */
+
+#include <dt-bindings/input/gpio-keys.h>
+#include "sun50i-h700-anbernic-rg35xx-plus.dts"
+
+/ {
+	model = "Anbernic RG35XX SP";
+	compatible = "anbernic,rg35xx-sp", "allwinner,sun50i-h700";
+
+	gpio-keys-lid {
+		compatible = "gpio-keys";
+
+		lid-switch {
+			label = "Lid Switch";
+			gpios = <&pio 4 7 GPIO_ACTIVE_LOW>; /* PE7 */
+			linux,can-disable;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+};
+
+&r_i2c {
+	rtc_ext: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
new file mode 100644
index 000000000000..7b36c47a3a13
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -0,0 +1,735 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2023-2024 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun55i-a523-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-mcu-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-r-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-mcu-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-r-ccu.h>
+#include <dt-bindings/power/allwinner,sun55i-a523-ppu.h>
+#include <dt-bindings/power/allwinner,sun55i-a523-pck-600.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@400 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x400>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@500 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x500>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@600 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x600>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@700 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x700>;
+			enable-method = "psci";
+		};
+	};
+
+	osc24M: osc24M-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		gpu: gpu@1800000 {
+			compatible = "allwinner,sun55i-a523-mali",
+				     "arm,mali-valhall-jm";
+			reg = <0x1800000 0x10000>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			power-domains = <&pck600 PD_GPU>;
+			resets = <&ccu RST_BUS_GPU>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@2000000 {
+			compatible = "allwinner,sun55i-a523-pinctrl";
+			reg = <0x2000000 0x800>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5";
+				allwinner,pinmux = <2>;
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0" ,"PG1", "PG2", "PG3", "PG4", "PG5";
+				allwinner,pinmux = <2>;
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC0", "PC1" ,"PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11", "PC13", "PC14",
+				       "PC15", "PC16";
+				allwinner,pinmux = <3>;
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			rgmii0_pins: rgmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10",
+				       "PH14", "PH15", "PH16", "PH17", "PH18";
+				allwinner,pinmux = <5>;
+				function = "gmac0";
+				drive-strength = <40>;
+				bias-disable;
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				allwinner,pinmux = <2>;
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+				allwinner,pinmux = <2>;
+			};
+
+			/omit-if-no-ref/
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+				allwinner,pinmux = <2>;
+			};
+		};
+
+		ccu: clock-controller@2001000 {
+			compatible = "allwinner,sun55i-a523-ccu";
+			reg = <0x02001000 0x1000>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>, <&rtc CLK_OSC32K_FANOUT>;
+			clock-names = "hosc", "losc",
+				      "iosc", "losc-fanout";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		wdt: watchdog@2050000 {
+			compatible = "allwinner,sun55i-a523-wdt";
+			reg = <0x2050000 0x20>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			status = "okay";
+		};
+
+		uart0: serial@2500000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500000 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@2500400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500400 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@2500800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500800 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@2500c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500c00 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@2501000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501000 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@2501400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501400 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@2501800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501800 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART6>;
+			resets = <&ccu RST_BUS_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@2501c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501c00 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART7>;
+			resets = <&ccu RST_BUS_UART7>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2502000 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502000 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@2502400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502400 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@2502800 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502800 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@2502c00 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502c00 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@2503000 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2503000 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5: i2c@2503400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2503400 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C5>;
+			resets = <&ccu RST_BUS_I2C5>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun55i-a523-system-control",
+				     "allwinner,sun50i-a64-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		sid: efuse@3006000 {
+			compatible = "allwinner,sun55i-a523-sid",
+				     "allwinner,sun50i-a64-sid";
+			reg = <0x03006000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		gic: interrupt-controller@3400000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <1>;
+			#interrupt-cells = <3>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			reg = <0x3400000 0x10000>,
+			      <0x3460000 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			dma-noncoherent;
+
+			its: msi-controller@3440000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x3440000 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+				dma-noncoherent;
+			};
+		};
+
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@4100000 {
+			compatible = "allwinner,sun55i-a523-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x4100000 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			extcon = <&usbphy 0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: phy@4100400 {
+			compatible = "allwinner,sun55i-a523-usb-phy",
+				     "allwinner,sun20i-d1-usb-phy";
+			reg = <0x4100400 0x100>,
+			      <0x4101800 0x100>,
+			      <0x4200800 0x100>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&osc24M>,
+				 <&osc24M>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@4101000 {
+			compatible = "allwinner,sun55i-a523-ehci",
+				     "generic-ehci";
+			reg = <0x4101000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@4101400 {
+			compatible = "allwinner,sun55i-a523-ohci",
+				     "generic-ohci";
+			reg = <0x4101400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@4200000 {
+			compatible = "allwinner,sun55i-a523-ehci",
+				     "generic-ehci";
+			reg = <0x4200000 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@4200400 {
+			compatible = "allwinner,sun55i-a523-ohci",
+				     "generic-ohci";
+			reg = <0x4200400 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@4500000 {
+			compatible = "allwinner,sun55i-a523-gmac0",
+				     "allwinner,sun50i-a64-emac";
+			reg = <0x04500000 0x10000>;
+			clocks = <&ccu CLK_BUS_EMAC0>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC0>;
+			reset-names = "stmmaceth";
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rgmii0_pins>;
+			syscon = <&syscon>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		ppu: power-controller@7001400 {
+			compatible = "allwinner,sun55i-a523-ppu";
+			reg = <0x07001400 0x400>;
+			clocks = <&r_ccu CLK_BUS_R_PPU1>;
+			resets = <&r_ccu RST_BUS_R_PPU1>;
+			#power-domain-cells = <1>;
+		};
+
+		r_ccu: clock-controller@7010000 {
+			compatible = "allwinner,sun55i-a523-r-ccu";
+			reg = <0x7010000 0x250>;
+			clocks = <&osc24M>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0_200M>,
+				 <&ccu CLK_PLL_AUDIO0_4X>;
+			clock-names = "hosc",
+				      "losc",
+				      "iosc",
+				      "pll-periph",
+				      "pll-audio";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			assigned-clocks = <&r_ccu CLK_R_AHB>, <&r_ccu CLK_R_APB0>;
+			assigned-clock-rates = <200000000>, <100000000>;
+		};
+
+		nmi_intc: interrupt-controller@7010320 {
+			compatible = "allwinner,sun55i-a523-nmi";
+			reg = <0x07010320 0xc>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun55i-a523-r-pinctrl";
+			reg = <0x7022000 0x800>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB0>,
+				 <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0" ,"PL1";
+				allwinner,pinmux = <2>;
+				function = "r_i2c0";
+			};
+		};
+
+		pck600: power-controller@7060000 {
+			compatible = "allwinner,sun55i-a523-pck-600";
+			reg = <0x07060000 0x8000>;
+			clocks = <&r_ccu CLK_BUS_R_PPU0>;
+			resets = <&r_ccu RST_BUS_R_PPU0>;
+			#power-domain-cells = <1>;
+		};
+
+		r_i2c0: i2c@7081400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_BUS_R_I2C0>;
+			resets = <&r_ccu RST_BUS_R_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		rtc: rtc@7090000 {
+			compatible = "allwinner,sun55i-a523-rtc",
+				     "allwinner,sun50i-r329-rtc";
+			reg = <0x7090000 0x400>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_BUS_R_RTC>,
+				 <&osc24M>,
+				 <&r_ccu CLK_R_AHB>;
+			clock-names = "bus", "hosc", "ahb";
+			#clock-cells = <1>;
+		};
+
+		mcu_ccu: clock-controller@7102000 {
+			compatible = "allwinner,sun55i-a523-mcu-ccu";
+			reg = <0x7102000 0x200>;
+			clocks = <&osc24M>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_AUDIO0_4X>,
+				 <&ccu CLK_PLL_PERIPH0_300M>,
+				 <&ccu CLK_DSP>,
+				 <&ccu CLK_MBUS>,
+				 <&r_ccu CLK_R_AHB>,
+				 <&r_ccu CLK_R_APB0>;
+			clock-names = "hosc",
+				      "losc",
+				      "iosc",
+				      "pll-audio0-4x",
+				      "pll-periph0-300m",
+				      "dsp",
+				      "mbus",
+				      "r-ahb",
+				      "r-apb0";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		npu: npu@7122000 {
+			compatible = "vivante,gc";
+			reg = <0x07122000 0x1000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mcu_ccu CLK_BUS_MCU_NPU_ACLK>,
+				 <&ccu CLK_NPU>,
+				 <&mcu_ccu CLK_BUS_MCU_NPU_HCLK>;
+			clock-names = "bus", "core", "reg";
+			resets = <&mcu_ccu RST_BUS_MCU_NPU>;
+			power-domains = <&ppu PD_NPU>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
new file mode 100644
index 000000000000..f82a8d121697
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2025 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Radxa Cubie A5E";
+	compatible = "radxa,cubie-a5e", "allwinner,sun55i-a527";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-led {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		use-led {
+			function = LED_FUNCTION_ACTIVITY;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>; /* pmic_temp */
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the USB-C connector */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>;	/* PL8 */
+		enable-active-high;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_cldo3>;
+
+	allwinner,tx-delay-ps = <300>;
+	allwinner,rx-delay-ps = <400>;
+
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_cldo3>;
+	vcc-pe-supply = <&reg_aldo2>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_cldo3>;
+	vcc-pj-supply = <&reg_cldo4>;
+	vcc-pk-supply = <&reg_cldo1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@34 {
+		compatible = "x-powers,axp717";
+		reg = <0x34>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* charger mode design but has no battery terminal */
+			status = "disabled";
+		};
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-usb";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-iowifi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pm-lpddr4";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-mipi-cam";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pc-and-their-dog";
+			};
+
+			reg_cldo2: cldo2 {
+				/* not connected */
+			};
+
+			reg_cldo3: cldo3 {
+				/* IO, USB-2, 3V3, card, NAND, sensor, PI */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-spi-ana";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pj-phy";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-mipi-dsi";
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* RISC-V management core supply */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The USB-C port is the primary power supply, so in this configuration
+	 * relies on the other end of the USB cable to supply the VBUS power.
+	 * So use this port in peripheral mode.
+	 * It is possible to supply the board with the 5V pins on the GPIO
+	 * header, and since the DCIN_5V line is hardwired to the USB-C VBUS
+	 * pins, the port turns into a host port, unconditionally supplying
+	 * power. The dr_mode property should be changed to "host" here, if
+	 * users choose this setup.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+/*
+ * The schematic describes USB0_ID (PL10), measuring VBUS_5V, which looks to
+ * be always on. Also there is USB-VBUSDET (PL2), which is measuring the same
+ * VBUS_5V. There is also DCIN_DET, which measures DCIN_5V, so the power
+ * input rail.
+ * None of them seem to make any sense in relation to detecting USB devices
+ * or whether there is power provided via any USB pins: they would always
+ * report high, otherwise the system wouldn't be running.
+ * The AXP717C provides proper USB-C CC pin functionality, but the PMIC is
+ * not connected to those pins of the USB-C connector.
+ */
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb1_vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts
new file mode 100644
index 000000000000..a96927fbdadd
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2024 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "X96Q Pro+";
+	compatible = "amediatech,x96q-pro-plus", "allwinner,sun55i-h728";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the barrel plug */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* 3.3V dummy supply for the SD card */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_dcdc4>;
+	vcc-pe-supply = <&reg_dcdc4>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_dcdc4>;
+	vcc-pj-supply = <&reg_dcdc4>;
+	vcc-pk-supply = <&reg_bldo3>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@34 {
+		compatible = "x-powers,axp717";
+		reg = <0x34>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies the "little" cluster (1.0(?) GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1360000>;
+				regulator-max-microvolt = <1360000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd-dcdc4";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				/* not connected */
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-aldo3";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi-lvds";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dram-1v8";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc-bldo3";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-codec-sd";
+			};
+
+			reg_cldo2: cldo2 {
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-codec-eth-sd";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-eth-phy";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				/* not connected */
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-name = "vdd-dcdc3";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/* USB0 is a USB-A receptacle, always powered, so force host mode. */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
new file mode 100644
index 000000000000..1b054fa8ef74
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2024 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Avaota A1";
+	compatible = "yuzukihd,avaota-a1", "allwinner,sun55i-t527";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>; /* pmic_temp */
+	};
+
+	reg_vcc12v: vcc12v {
+		/* DC input jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the 12V->5V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc12v>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&pio 8 12 GPIO_ACTIVE_HIGH>;	/* PI12 */
+		enable-active-high;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dcdc4>;
+
+	allwinner,tx-delay-ps = <100>;
+	allwinner,rx-delay-ps = <300>;
+
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_dcdc4>;
+	vcc-pe-supply = <&reg_dcdc4>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_dcdc4>;
+	vcc-pj-supply = <&reg_dcdc4>;
+	vcc-pk-supply = <&reg_bldo3>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@35 {
+		compatible = "x-powers,axp717";
+		reg = <0x35>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* no battery; output used for dcdc4 instead */
+			status = "disabled";
+		};
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1160000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd-io";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				/* not connected */
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-pm";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi-lvds";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dram-1v8";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-cvp-pk-vid1v8";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pc";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-spi-ana";
+			};
+
+			reg_cldo4: cldo4 {
+				/* not connected */
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+			/* 12V-5V buck converter can supply up to 5A */
+			input-current-limit-microamp = <3250000>;
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				/* not connected */
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* Some RISC-V management core related voltage */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&rtc {
+	clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>,
+		 <&r_ccu CLK_R_AHB>, <&ext_osc32k>;
+	clock-names = "bus", "hosc", "ahb", "ext-osc32k";
+	assigned-clocks = <&rtc CLK_OSC32K>;
+	assigned-clock-rates = <32768>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	 /*
+	  * The CC pins of the USB-C port have two pull-down resistors
+	  * connected to GND, which fixes this port to a peripheral role.
+	  * There is a regulator, controlled by a GPIO, to provide VBUS power
+	  * to the port, and a VBUSDET GPIO, to detect externally provided
+	  * power, but without the CC pins there is no real way to do a
+	  * runtime role detection.
+	  */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb_vbus>;
+	usb0_vbus_det-gpios = <&pio 8 13 GPIO_ACTIVE_HIGH>; /* PI13 */
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
new file mode 100644
index 000000000000..39a4e194712a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright (C) 2025 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "OrangePi 4A";
+	compatible = "xunlong,orangepi-4a", "allwinner,sun55i-t527";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* PWM capable pin, but PWM isn't supported yet. */
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>, /* pmic_temp */
+			      <&axp717_adc 7>; /* bkup_batt_v */
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 1 1 GPIO_ACTIVE_LOW>; /* PM1 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 4 GPIO_ACTIVE_HIGH>;	/* PL4 */
+		enable-active-high;
+	};
+
+	reg_pcie_vcc3v3: regulator-pcie-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-pcie-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>;	/* PL8 */
+		enable-active-high;
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 12 GPIO_ACTIVE_HIGH>;	/* PL12 */
+		enable-active-high;
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board wide 5V supply from USB type-C port */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_dldo1_323>;
+	vqmmc-supply = <&reg_bldo1>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_cldo3>;
+	vcc-pe-supply = <&reg_aldo2>;
+	vcc-pf-supply = <&reg_cldo3>;	/* VCC-IO for 3.3v; VCC-MCSI for 1.8v */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_cldo3>;
+	vcc-pj-supply = <&reg_cldo1>;
+	vcc-pk-supply = <&reg_cldo1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@35 {
+		compatible = "x-powers,axp717";
+		reg = <0x35>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupts-extended = <&nmi_intc 0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* no battery; output used for dcdc4 instead */
+			status = "disabled";
+		};
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1160000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				/* feeds 3.3V pin on GPIO header */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd-io";
+			};
+
+			aldo1 {
+				/* not actually connected */
+				regulator-name = "avdd-csi";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-usb";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pm-lpddr";
+			};
+
+			bldo3 {
+				/* not actually connected */
+				regulator-name = "afvcc-csi";
+			};
+
+			bldo4 {
+				/* not actually connected */
+				regulator-name = "dvdd-csi";
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-cvp-pc-lvds-mcsi-pk-efuse-pcie-edp-1v8";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-csi";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-nand-pd-pi-usb";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-phy1-lcd";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus-usb-0v9";
+			};
+		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+			input-current-limit-microamp = <3000000>;
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1_323: aldo1 {
+				/* less capable and shares load with dldo1 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo1_323: dldo1 {
+				/* more capable and shares load with aldo1 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi2";
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* Some RISC-V management core related voltage */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_bldo2>;
+};
+
+&rtc {
+	clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>,
+		 <&r_ccu CLK_R_AHB>, <&ext_osc32k>;
+	clock-names = "bus", "hosc", "ahb", "ext-osc32k";
+	assigned-clocks = <&rtc CLK_OSC32K>;
+	assigned-clock-rates = <32768>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_aldo1_323>;
+		vddio-supply = <&reg_bldo1>;
+		device-wakeup-gpios = <&r_pio 1 3 GPIO_ACTIVE_HIGH>; /* PM3 */
+		host-wakeup-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		shutdown-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+	};
+};
+
+&usb_otg {
+	/*
+	 * The OTG controller is connected to one of the type-A ports.
+	 * There is a regulator, controlled by a GPIO, to provide VBUS power
+	 * to the port, and a VBUSDET GPIO, to detect externally provided
+	 * power. But without ID or CC pins there is no real way to do a
+	 * runtime role detection.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_otg_vbus>;
+	usb0_vbus_det-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+	usb1_vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 439497ab967d..effd242f6bf7 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -34,6 +34,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&l2_shared>;
 			reg = <0x0>;
 		};
 
@@ -41,6 +42,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&l2_shared>;
 			reg = <0x1>;
 		};
 
@@ -48,6 +50,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&l2_shared>;
 			reg = <0x2>;
 		};
 
@@ -55,12 +58,38 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&l2_shared>;
 			reg = <0x3>;
 		};
+
+		l2_shared: cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		svc {
+			compatible = "intel,stratix10-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+
+			fpga_mgr: fpga-mgr {
+				compatible = "intel,stratix10-soc-fpga-mgr";
+			};
+		};
+	};
+
+	fpga-region {
+		compatible = "fpga-region";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		fpga-mgr = <&fpga_mgr>;
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <0 170 4>,
 			     <0 171 4>,
 			     <0 172 4>,
@@ -101,16 +130,19 @@
 		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <150000000>;
 		};
 
 		cb_intosc_ls_clk: cb-intosc-ls-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <300000000>;
 		};
 
 		f2s_free_clk: f2s-free-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			status = "disabled";
 		};
 
 		osc1: osc1 {
@@ -125,7 +157,7 @@
 		};
 	};
 
-	soc {
+	soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -133,13 +165,6 @@
 		interrupt-parent = <&intc>;
 		ranges = <0 0 0 0xffffffff>;
 
-		base_fpga_region {
-			#address-cells = <0x2>;
-			#size-cells = <0x2>;
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-
 		clkmgr: clock-controller@ffd10000 {
 			compatible = "intel,stratix10-clkmgr";
 			reg = <0xffd10000 0x1000>;
@@ -373,7 +398,7 @@
 
 		rst: rstmgr@ffd11000 {
 			#reset-cells = <1>;
-			compatible = "altr,stratix10-rst-mgr";
+			compatible = "altr,stratix10-rst-mgr", "altr,rst-mgr";
 			reg = <0xffd11000 0x1000>;
 		};
 
@@ -510,6 +535,7 @@
 			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
 			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			clock-names = "otg";
 			iommus = <&smmu 7>;
 			status = "disabled";
 		};
@@ -620,18 +646,6 @@
 
 			status = "disabled";
 		};
-
-		firmware {
-			svc {
-				compatible = "intel,stratix10-svc";
-				method = "smc";
-				memory-region = <&service_reserved>;
-
-				fpga_mgr: fpga-mgr {
-					compatible = "intel,stratix10-soc-fpga-mgr";
-				};
-			};
-		};
 	};
 
 	usbphy0: usbphy0 {
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 468fcc7da066..4eee777ef1a1 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -51,7 +51,7 @@
 		regulator-max-microvolt = <330000>;
 	};
 
-	soc {
+	soc@0 {
 		eccmgr {
 			sdmmca-ecc@ff8c8c00 {
 				compatible = "altr,socfpga-s10-sdmmc-ecc",
@@ -66,14 +66,14 @@
 };
 
 &pinctrl0 {
-	i2c1_pmx_func: i2c1-pmx-func {
+	i2c1_pmx_func: i2c1-pmx-func-pins {
 		pinctrl-single,pins = <
 			0x78   0x4   /* I2C1_SDA (IO6-B) PIN30SEL) */
 			0x7c   0x4   /* I2C1_SCL (IO7-B) PIN31SEL */
 		>;
 	};
 
-	i2c1_pmx_func_gpio: i2c1-pmx-func-gpio {
+	i2c1_pmx_func_gpio: i2c1-pmx-func-gpio-pins {
 		pinctrl-single,pins = <
 			0x78   0x8   /* I2C1_SDA (IO6-B) PIN30SEL) */
 			0x7c   0x8   /* I2C1_SCL (IO7-B) PIN31SEL */
@@ -180,15 +180,11 @@
 &qspi {
 	status = "okay";
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <1>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
index 532164a6354c..7c53cb9621e5 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -51,7 +51,7 @@
 		regulator-max-microvolt = <330000>;
 	};
 
-	soc {
+	soc@0 {
 		eccmgr {
 			sdmmca-ecc@ff8c8c00 {
 				compatible = "altr,socfpga-s10-sdmmc-ecc",
@@ -102,7 +102,7 @@
 &nand {
 	status = "okay";
 
-	flash@0 {
+	nand@0 {
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -169,15 +169,11 @@
 &qspi {
 	status = "okay";
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <1>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
index ff413f8e3b07..ad52e8a0b9ba 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
@@ -63,13 +63,11 @@
 	status = "okay";
 	phy-mode = "rgmii";
 	phy-addr = <0xffffffff>;
-	snps,max-mtu = <0x0>;
 };
 
 &gmac1 {
 	status = "okay";
 	phy-mode = "rgmii";
-	phy-addr = <0xffffffff>;
 };
 
 &gmac2 {
@@ -80,8 +78,6 @@
 
 &mmc {
 	status = "okay";
-	altr,dw-mshc-ciu-div = <0x3>;
-	altr,dw-mshc-sdr-timing = <0x0 0x3>;
 	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	broken-cd;
@@ -106,12 +102,7 @@
 	status = "okay";
 };
 
-&rst {
-	altr,modrst-offset = <0x20>;
-};
-
 &sysmgr {
 	reg = <0xffd12000 0x1000>;
 	interrupts = <0x0 0x10 0x4>;
-	cpu1-start-addr = <0xffd06230>;
 };
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index dccbba6e7f98..f49209fddbbb 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -39,6 +39,7 @@
 / {
 	model = "Annapurna Labs Alpine v2";
 	compatible = "al,alpine-v2";
+	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 
@@ -89,6 +90,22 @@
 		clock-frequency = <1000000>;
 	};
 
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -97,22 +114,6 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
-		timer {
-			compatible = "arm,armv8-timer";
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-		};
-
-		pmu {
-			compatible = "arm,armv8-pmuv3";
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
 		gic: interrupt-controller@f0200000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0xf0200000 0x0 0x10000>,	/* GIC Dist */
@@ -122,6 +123,7 @@
 			      <0x0 0xf0120000 0x0 0x2000>;	/* GICH */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 		};
 
@@ -145,13 +147,12 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <160>;
 			al,msi-num-spis = <160>;
 		};
 
-		io-fabric {
+		io-bus@fc000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
index 39481d7fd7d4..bd35e0e9d0ab 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -244,7 +244,7 @@
 			next-level-cache = <&cluster3_l2>;
 		};
 
-		cluster0_l2: cache@0 {
+		cluster0_l2: cache-0 {
 			compatible = "cache";
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
@@ -253,7 +253,7 @@
 			cache-unified;
 		};
 
-		cluster1_l2: cache@100 {
+		cluster1_l2: cache-100 {
 			compatible = "cache";
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
@@ -262,7 +262,7 @@
 			cache-unified;
 		};
 
-		cluster2_l2: cache@200 {
+		cluster2_l2: cache-200 {
 			compatible = "cache";
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
@@ -271,7 +271,7 @@
 			cache-unified;
 		};
 
-		cluster3_l2: cache@300 {
+		cluster3_l2: cache-300 {
 			compatible = "cache";
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
@@ -318,8 +318,9 @@
 		#size-cells = <2>;
 		ranges;
 
-		gic: interrupt-controller@f0000000 {
+		gic: interrupt-controller@f0800000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x0 0xf0800000 0 0x10000>,	/* GICD */
@@ -355,14 +356,13 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <336>;
 			al,msi-num-spis = <959>;
 			interrupt-parent = <&gic>;
 		};
 
-		io-fabric {
+		io-bus@fc000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
index 1a65f1ec183d..8862adae44e9 100644
--- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -27,7 +27,6 @@
 
 &ccp0 {
 	status = "okay";
-	amd,zlib-support = <1>;
 };
 
 /**
@@ -59,7 +58,7 @@
 
 &spi1 {
 	status = "okay";
-	sdcard0: sdcard@0 {
+	sdcard0: mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
index 52f8d36295a8..b34dd8d5d1b1 100644
--- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -8,33 +8,10 @@
 
 /dts-v1/;
 
-/include/ "amd-seattle-soc.dtsi"
-/include/ "amd-seattle-cpus.dtsi"
+/include/ "amd-overdrive-rev-b0.dts"
 
 / {
 	model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
-	compatible = "amd,seattle-overdrive", "amd,seattle";
-
-	chosen {
-		stdout-path = &serial0;
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-};
-
-&ccp0 {
-	status = "okay";
-	amd,zlib-support = <1>;
-};
-
-/**
- * NOTE: In Rev.B, gpio0 is reserved.
- */
-&gpio1 {
-	status = "okay";
 };
 
 &gpio2 {
@@ -45,48 +22,11 @@
 	status = "okay";
 };
 
-&gpio4 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
 &sata1 {
 	status = "okay";
 };
 
-&spi0 {
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-	sdcard0: sdcard@0 {
-		compatible = "mmc-spi-slot";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		voltage-ranges = <3200 3400>;
-		pl022,interface = <0>;
-		pl022,com-mode = <0x0>;
-		pl022,rx-level-trig = <0>;
-		pl022,tx-level-trig = <0>;
-	};
-};
-
 &ipmi_kcs {
 	status = "okay";
 };
 
-&smb0 {
-	/include/ "amd-seattle-xgbe-b.dtsi"
-};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
index 2dd2c28171ee..73f687773ce6 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
@@ -5,51 +5,39 @@
  * Copyright (C) 2014 Advanced Micro Devices, Inc.
  */
 
-	adl3clk_100mhz: clk100mhz_0 {
+	adl3clk_100mhz: uartspiclk_100mhz: clock-100000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "adl3clk_100mhz";
 	};
 
-	ccpclk_375mhz: clk375mhz {
+	ccpclk_375mhz: clock-375000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <375000000>;
 		clock-output-names = "ccpclk_375mhz";
 	};
 
-	sataclk_333mhz: clk333mhz {
+	sataclk_333mhz: clock-333000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <333000000>;
 		clock-output-names = "sataclk_333mhz";
 	};
 
-	pcieclk_500mhz: clk500mhz_0 {
+	dmaclk_500mhz: pcieclk_500mhz: clock-500000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <500000000>;
 		clock-output-names = "pcieclk_500mhz";
 	};
 
-	dmaclk_500mhz: clk500mhz_1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <500000000>;
-		clock-output-names = "dmaclk_500mhz";
-	};
-
-	miscclk_250mhz: clk250mhz_4 {
+	xgmacclk0_dma_250mhz: xgmacclk0_ptp_250mhz: xgmacclk1_dma_250mhz: xgmacclk1_ptp_250mhz:
+	miscclk_250mhz: clock-250000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <250000000>;
 		clock-output-names = "miscclk_250mhz";
 	};
 
-	uartspiclk_100mhz: clk100mhz_1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-		clock-output-names = "uartspiclk_100mhz";
-	};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 690020589d41..a611f8288b3e 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -11,6 +11,8 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	/include/ "amd-seattle-clks.dtsi"
+
 	gic0: interrupt-controller@e1101000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		interrupt-controller;
@@ -38,7 +40,7 @@
 			     <1 10 0xff04>;
 	};
 
-	smb0: smb {
+	smb0: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -51,8 +53,6 @@
 		 */
 		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
-		/include/ "amd-seattle-clks.dtsi"
-
 		sata0: sata@e0300000 {
 			compatible = "snps,dwc-ahci";
 			reg = <0 0xe0300000 0 0xf0000>;
@@ -121,20 +121,18 @@
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1020000 0 0x1000>;
-			spi-controller;
 			interrupts = <0 330 4>;
-			clocks = <&uartspiclk_100mhz>;
-			clock-names = "apb_pclk";
+			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		spi1: spi@e1030000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1030000 0 0x1000>;
-			spi-controller;
 			interrupts = <0 329 4>;
-			clocks = <&uartspiclk_100mhz>;
-			clock-names = "apb_pclk";
+			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
+			clock-names = "sspclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
index 9259e547e2e8..18b0c2dd1b2d 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -5,35 +5,7 @@
  * Copyright (C) 2015 Advanced Micro Devices, Inc.
  */
 
-	xgmacclk0_dma_250mhz: clk250mhz_0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk0_dma_250mhz";
-	};
-
-	xgmacclk0_ptp_250mhz: clk250mhz_1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk0_ptp_250mhz";
-	};
-
-	xgmacclk1_dma_250mhz: clk250mhz_2 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk1_dma_250mhz";
-	};
-
-	xgmacclk1_ptp_250mhz: clk250mhz_3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk1_ptp_250mhz";
-	};
-
-	xgmac0: xgmac@e0700000 {
+	xgmac0: ethernet@e0700000 {
 		compatible = "amd,xgbe-seattle-v1a";
 		reg = <0 0xe0700000 0 0x80000>,
 		      <0 0xe0780000 0 0x80000>,
@@ -59,7 +31,7 @@
 		dma-coherent;
 	};
 
-	xgmac1: xgmac@e0900000 {
+	xgmac1: ethernet@e0900000 {
 		compatible = "amd,xgbe-seattle-v1a";
 		reg = <0 0xe0900000 0 0x80000>,
 		      <0 0xe0980000 0 0x80000>,
diff --git a/arch/arm64/boot/dts/amd/elba-16core.dtsi b/arch/arm64/boot/dts/amd/elba-16core.dtsi
index 568bcc39ce9f..6c1b7b8fe354 100644
--- a/arch/arm64/boot/dts/amd/elba-16core.dtsi
+++ b/arch/arm64/boot/dts/amd/elba-16core.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
  * Copyright 2020-2023 Advanced Micro Devices, Inc.
  */
diff --git a/arch/arm64/boot/dts/amd/elba-asic-common.dtsi b/arch/arm64/boot/dts/amd/elba-asic-common.dtsi
index 46b6c6783f58..d12e9a7b5587 100644
--- a/arch/arm64/boot/dts/amd/elba-asic-common.dtsi
+++ b/arch/arm64/boot/dts/amd/elba-asic-common.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
  * Copyright 2020-2022 Advanced Micro Devices, Inc.
  */
diff --git a/arch/arm64/boot/dts/amd/elba-asic.dts b/arch/arm64/boot/dts/amd/elba-asic.dts
index c3f4da2f7449..20b0fa0807a1 100644
--- a/arch/arm64/boot/dts/amd/elba-asic.dts
+++ b/arch/arm64/boot/dts/amd/elba-asic.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
  * Device Tree file for AMD Pensando Elba Board.
  *
diff --git a/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi b/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi
index cf761a05a81f..6ea2d777c8c9 100644
--- a/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi
+++ b/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
  * Copyright 2020-2023 Advanced Micro Devices, Inc.
  */
diff --git a/arch/arm64/boot/dts/amd/elba.dtsi b/arch/arm64/boot/dts/amd/elba.dtsi
index 674890cf2a34..758bce0a0b2a 100644
--- a/arch/arm64/boot/dts/amd/elba.dtsi
+++ b/arch/arm64/boot/dts/amd/elba.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
  * Copyright 2020-2022 Advanced Micro Devices, Inc.
  */
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index cc8b34bd583d..619dce79b020 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,5 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s6-s905x5-bl209.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s7-s805x3-bp201.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s7d-s905x5m-bm202.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
@@ -8,13 +14,19 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-bananapi-m2s.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3-ts050.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-mnt-reform2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-dreambox-one.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-dreambox-two.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
@@ -40,6 +52,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-libretech-ac.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805y-xiaomi-aquaman.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
@@ -56,6 +69,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-vero4k.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxlx-s905l-p271.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-gt1-ultimate.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
@@ -65,6 +80,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-ugoos-am3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
@@ -74,9 +90,16 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m2-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l-ts050.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-s905d3-libretech-cc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
+
+# Overlays
+meson-g12a-fbx8am-brcm-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
+meson-g12a-fbx8am-realtek-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
+meson-g12b-a311d-khadas-vim3-ts050-dtbs := meson-g12b-a311d-khadas-vim3.dtb meson-khadas-vim3-ts050.dtbo
+meson-sm1-khadas-vim3l-ts050-dtbs	:= meson-sm1-khadas-vim3l.dtb meson-khadas-vim3-ts050.dtbo
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
new file mode 100644
index 000000000000..ad3127e695d9
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-a4.dtsi"
+
+/ {
+	model = "Amlogic A113L2 ba400 Development Board";
+	compatible = "amlogic,ba400", "amlogic,a4";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 10 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0xa00000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
new file mode 100644
index 000000000000..54d7a2d56ef6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x2000>,
+			      <0x0 0xfff04000 0 0x2000>,
+			      <0x0 0xfff06000 0 0x2000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			watchdog@2100 {
+				compatible = "amlogic,a4-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,a4-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,a4-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h b/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h
new file mode 100644
index 000000000000..f6a4c90bab3c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_A4_RESET_H
+#define __DTS_AMLOGIC_A4_RESET_H
+
+/* RESET0 */
+/*						0-3 */
+#define RESET_USB				4
+/*						5-6*/
+#define RESET_U2PHY22				7
+#define RESET_USBPHY20				8
+#define RESET_U2PHY21				9
+#define RESET_USB2DRD				10
+#define RESET_U2H				11
+#define RESET_LED_CTRL				12
+/*						13-31 */
+
+/* RESET1 */
+#define RESET_AUDIO				32
+#define RESET_AUDIO_VAD				33
+/*						34*/
+#define RESET_DDR_APB				35
+#define RESET_DDR				36
+#define RESET_VOUT_VENC				37
+#define RESET_VOUT				38
+/*						39-47 */
+#define RESET_ETHERNET				48
+/*						49-63 */
+
+/* RESET2 */
+#define RESET_DEVICE_MMC_ARB			64
+#define RESET_IRCTRL				65
+/*						66*/
+#define RESET_TS_PLL				67
+/*						68-72*/
+#define RESET_SPICC_0				73
+#define RESET_SPICC_1				74
+/*						75-79*/
+#define RESET_MSR_CLK				80
+/*						81*/
+#define RESET_SAR_ADC				82
+/*						83-87*/
+#define RESET_ACODEC				88
+/*						89-90*/
+#define RESET_WATCHDOG				91
+/*						92-95*/
+
+/* RESET3 */
+/*						96-127 */
+
+/* RESET4 */
+/*						128-131 */
+#define RESET_PWM_AB				132
+#define RESET_PWM_CD				133
+#define RESET_PWM_EF				134
+#define RESET_PWM_GH				135
+/*						136-137*/
+#define RESET_UART_A				138
+#define RESET_UART_B				139
+/*						140*/
+#define RESET_UART_D				141
+#define RESET_UART_E				142
+/*						143-144*/
+#define RESET_I2C_M_A				145
+#define RESET_I2C_M_B				146
+#define RESET_I2C_M_C				147
+#define RESET_I2C_M_D				148
+/*						149-151*/
+#define RESET_SDEMMC_A				152
+/*						153*/
+#define RESET_SDEMMC_C				154
+/*						155-159*/
+
+/* RESET5 */
+/*						160-175*/
+#define RESET_BRG_AO_NIC_SYS			176
+/*						177*/
+#define RESET_BRG_AO_NIC_MAIN			178
+#define RESET_BRG_AO_NIC_AUDIO			179
+/*						180-183*/
+#define RESET_BRG_AO_NIC_ALL			184
+/*						185*/
+#define RESET_BRG_NIC_SDIO			186
+#define RESET_BRG_NIC_EMMC			187
+#define RESET_BRG_NIC_DSU			188
+#define RESET_BRG_NIC_CLK81			189
+#define RESET_BRG_NIC_MAIN			190
+#define RESET_BRG_NIC_ALL			191
+
+#endif
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
new file mode 100644
index 000000000000..fce45933fa28
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#include "amlogic-a4-common.dtsi"
+#include "amlogic-a4-reset.h"
+#include <dt-bindings/power/amlogic,a4-pwrc.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,a4-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+};
+
+&apb {
+	reset: reset-controller@2000 {
+		compatible = "amlogic,a4-reset",
+			     "amlogic,meson-s4-reset";
+		reg = <0x0 0x2000 0x0 0x98>;
+		#reset-cells = <1>;
+	};
+
+	periphs_pinctrl: pinctrl@4000 {
+		compatible = "amlogic,pinctrl-a4";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x4000 0x0 0x280>;
+
+		gpiox: gpio@100 {
+			reg = <0 0x100 0 0x40>, <0 0xc 0 0xc>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 18>;
+		};
+
+		gpiot: gpio@140 {
+			reg = <0 0x140 0 0x40>, <0 0x2c 0 0xc>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 23>;
+		};
+
+		gpiod: gpio@180 {
+			reg = <0 0x180 0 0x40>, <0 0x40 0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>;
+		};
+
+		gpioe: gpio@1c0 {
+			reg = <0 0x1c0 0 0x40>, <0 0x48 0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+		};
+
+		gpiob: gpio@240 {
+			reg = <0 0x240 0 0x40>, <0 0 0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+		};
+
+		func-uart-a {
+			uart_a_default: group-uart-a-pins1 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_X, 11, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 12, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 13, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 14, 1)>;
+			};
+
+			group-uart-a-pins2 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_D, 2, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_D, 3, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-b {
+			uart_b_default: group-uart-b-pins {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_E, 0, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_E, 1, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-d {
+			uart_d_default: group-uart-d-pins1 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 18, 4)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 19, 4)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+
+			group-uart-d-pins2 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 7, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 8, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 9, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 10, 2)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-e {
+			uart_e_default: group-uart-e-pins {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 14, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 15, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 16, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 17, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+	};
+
+	gpio_intc: interrupt-controller@4080 {
+		compatible = "amlogic,a4-gpio-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x4080 0x0 0x20>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts =
+			<10 11 12 13 14 15 16 17 18 19 20 21>;
+	};
+
+	ao_pinctrl: pinctrl@8e700 {
+		compatible = "amlogic,pinctrl-a4";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x8e700 0x0 0x80>;
+
+		gpioao: gpio@4 {
+			reg = <0 0x4 0 0x16>, <0 0 0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 7>;
+		};
+
+		test_n: gpio@44 {
+			reg = <0 0x44 0 0x20>;
+			reg-names = "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+		};
+	};
+
+	gpio_ao_intc: interrupt-controller@8e72c {
+		compatible = "amlogic,a4-gpio-ao-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x8e72c 0x0 0x0c>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts = <140 141>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5-a113x2-av400.dts b/arch/arm64/boot/dts/amlogic/amlogic-a5-a113x2-av400.dts
new file mode 100644
index 000000000000..11d8b88c1ce5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a5-a113x2-av400.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-a5.dtsi"
+
+/ {
+	model = "Amlogic A113X2 av400 Development Board";
+	compatible = "amlogic,av400", "amlogic,a5";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 10 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0xa00000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h b/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h
new file mode 100644
index 000000000000..cdf0f5159620
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_A5_RESET_H
+#define __DTS_AMLOGIC_A5_RESET_H
+
+/* RESET0 */
+/*						0-3 */
+#define RESET_USB				4
+/*						5-7 */
+#define RESET_USBPHY20				8
+/*						9 */
+#define RESET_USB2DRD				10
+/*						11-31 */
+
+/* RESET1 */
+#define RESET_AUDIO				32
+#define RESET_AUDIO_VAD				33
+/*                                              34 */
+#define RESET_DDR_APB				35
+#define RESET_DDR				36
+/*						37-40 */
+#define RESET_DSPA_DEBUG			41
+/*                                              42 */
+#define RESET_DSPA				43
+/*						44-46 */
+#define RESET_NNA				47
+#define RESET_ETHERNET				48
+/*						49-63 */
+
+/* RESET2 */
+#define RESET_ABUS_ARB				64
+#define RESET_IRCTRL				65
+/*						66 */
+#define RESET_TS_PLL				67
+/*						68-72 */
+#define RESET_SPICC_0				73
+#define RESET_SPICC_1				74
+#define RESET_RSA				75
+
+/*						76-79 */
+#define RESET_MSR_CLK				80
+#define RESET_SPIFC				81
+#define RESET_SAR_ADC				82
+/*						83-90 */
+#define RESET_WATCHDOG				91
+/*						92-95 */
+
+/* RESET3 */
+/*						96-127 */
+
+/* RESET4 */
+#define RESET_RTC				128
+/*						129-131 */
+#define RESET_PWM_AB				132
+#define RESET_PWM_CD				133
+#define RESET_PWM_EF				134
+#define RESET_PWM_GH				135
+/*						104-105 */
+#define RESET_UART_A				138
+#define RESET_UART_B				139
+#define RESET_UART_C				140
+#define RESET_UART_D				141
+#define RESET_UART_E				142
+/*						143*/
+#define RESET_I2C_S_A				144
+#define RESET_I2C_M_A				145
+#define RESET_I2C_M_B				146
+#define RESET_I2C_M_C				147
+#define RESET_I2C_M_D				148
+/*						149-151 */
+#define RESET_SDEMMC_A				152
+/*						153 */
+#define RESET_SDEMMC_C				154
+/*						155-159*/
+
+/* RESET5 */
+/*						160-175 */
+#define RESET_BRG_AO_NIC_SYS			176
+#define RESET_BRG_AO_NIC_DSPA			177
+#define RESET_BRG_AO_NIC_MAIN			178
+#define RESET_BRG_AO_NIC_AUDIO			179
+/*						180-183 */
+#define RESET_BRG_AO_NIC_ALL			184
+#define RESET_BRG_NIC_NNA			185
+#define RESET_BRG_NIC_SDIO			186
+#define RESET_BRG_NIC_EMMC			187
+#define RESET_BRG_NIC_DSU			188
+#define RESET_BRG_NIC_SYSCLK			189
+#define RESET_BRG_NIC_MAIN			190
+#define RESET_BRG_NIC_ALL			191
+
+#endif
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
new file mode 100644
index 000000000000..b1da8cbaa25a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#include "amlogic-a4-common.dtsi"
+#include "amlogic-a5-reset.h"
+#include <dt-bindings/power/amlogic,a5-pwrc.h>
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,a5-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+};
+
+&apb {
+	reset: reset-controller@2000 {
+		compatible = "amlogic,a5-reset",
+			     "amlogic,meson-s4-reset";
+		reg = <0x0 0x2000 0x0 0x98>;
+		#reset-cells = <1>;
+	};
+
+	gpio_intc: interrupt-controller@4080 {
+		compatible = "amlogic,a5-gpio-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x4080 0x0 0x20>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts =
+			<10 11 12 13 14 15 16 17 18 19 20 21>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
index edce8850b338..a6736ad2a648 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
@@ -16,14 +16,245 @@
 
 	aliases {
 		serial0 = &uart_b;
+		spi0 = &spifc;
 	};
 
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x10000000>;
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 9 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@7f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x07f00000 0x0 0x900000>;
+			no-map;
+		};
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddq: regulator-vddq {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ddr4_2v5: regulator-ddr4-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR4_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1V8_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_b: regulator-vddio-3v3-b {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sdcard: regulator-sdcard {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCARD_POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &uart_b {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&spifc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&spifc_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <83000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		status = "disabled";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot";
+				reg = <0 0x200000>;
+			};
+
+			partition@200000 {
+				label = "env";
+				reg = <0x200000 0x400000>;
+			};
+
+			partition@600000 {
+				label = "system";
+				reg = <0x600000 0xa00000>;
+			};
+
+			partition@1000000 {
+				label = "rootfs";
+				reg = <0x1000000 0x3000000>;
+			};
+
+			partition@4000000 {
+				label = "data";
+				reg = <0x4000000 0x8000000>;
+			};
+		};
+	};
+};
+
+&sd {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default","clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdcard>;
+	vqmmc-supply = <&sdcard>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
new file mode 100644
index 000000000000..45f8631f9feb
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-c3.dtsi"
+
+/ {
+	model = "Amlogic C308l aw419 Development Board";
+	compatible = "amlogic,aw419", "amlogic,c3";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+		spi0 = &spifc;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 9 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@7f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x07f00000 0x0 0x900000>;
+			no-map;
+		};
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddq: regulator-vddq {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ddr4_2v5: regulator-ddr4-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR4_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1V8_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_b: regulator-vddio-3v3-b {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sdcard: regulator-sdcard {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCARD_POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&spifc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&spifc_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <83000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		status = "disabled";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot";
+				reg = <0 0x200000>;
+			};
+
+			partition@200000 {
+				label = "env";
+				reg = <0x200000 0x400000>;
+			};
+
+			partition@600000 {
+				label = "system";
+				reg = <0x600000 0xa00000>;
+			};
+
+			partition@1000000 {
+				label = "rootfs";
+				reg = <0x1000000 0x3000000>;
+			};
+
+			partition@4000000 {
+				label = "data";
+				reg = <0x4000000 0x8000000>;
+			};
+		};
+	};
+};
+
+&sd {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default","clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdcard>;
+	vqmmc-supply = <&sdcard>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index 998f5050795c..07aaaf71ea9a 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -6,6 +6,12 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/amlogic,c3-reset.h>
+#include <dt-bindings/clock/amlogic,c3-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,c3-scmi-clkc.h>
+#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+#include <dt-bindings/power/amlogic,c3-pwrc.h>
+#include <dt-bindings/gpio/amlogic-c3-gpio.h>
 
 / {
 	cpus {
@@ -17,6 +23,13 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -24,6 +37,22 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x7d000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -47,6 +76,13 @@
 		#clock-cells = <0>;
 	};
 
+	xtal_32k: xtal-clk-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32k";
+		#clock-cells = <0>;
+	};
+
 	sm: secure-monitor {
 		compatible = "amlogic,meson-gxbb-sm";
 
@@ -56,6 +92,34 @@
 		};
 	};
 
+	sram@7f50e00 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x07f50e00 0x0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x07f50e00 0x100>;
+
+		scmi_shmem: sram@0 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x100>;
+		};
+	};
+
+	firmware {
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x820000C1>;
+			shmem = <&scmi_shmem>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -81,25 +145,599 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			clkc_periphs: clock-controller@0 {
+				compatible = "amlogic,c3-peripherals-clkc";
+				reg = <0x0 0x0 0x0 0x49c>;
+				#clock-cells = <1>;
+				clocks = <&xtal>,
+					 <&scmi_clk CLKID_OSC>,
+					 <&scmi_clk CLKID_FIXED_PLL_OSC>,
+					 <&clkc_pll CLKID_FCLK_DIV2>,
+					 <&clkc_pll CLKID_FCLK_DIV2P5>,
+					 <&clkc_pll CLKID_FCLK_DIV3>,
+					 <&clkc_pll CLKID_FCLK_DIV4>,
+					 <&clkc_pll CLKID_FCLK_DIV5>,
+					 <&clkc_pll CLKID_FCLK_DIV7>,
+					 <&clkc_pll CLKID_GP0_PLL>,
+					 <&scmi_clk CLKID_GP1_PLL_OSC>,
+					 <&clkc_pll CLKID_HIFI_PLL>,
+					 <&scmi_clk CLKID_SYS_CLK>,
+					 <&scmi_clk CLKID_AXI_CLK>,
+					 <&scmi_clk CLKID_SYS_PLL_DIV16>,
+					 <&scmi_clk CLKID_CPU_CLK_DIV16>;
+				clock-names = "xtal_24m",
+					      "oscin",
+					      "fix",
+					      "fdiv2",
+					      "fdiv2p5",
+					      "fdiv3",
+					      "fdiv4",
+					      "fdiv5",
+					      "fdiv7",
+					      "gp0",
+					      "gp1",
+					      "hifi",
+					      "sysclk",
+					      "axiclk",
+					      "sysplldiv16",
+					      "cpudiv16";
+			};
+
+			reset: reset-controller@2000 {
+				compatible = "amlogic,c3-reset";
+				reg = <0x0 0x2000 0x0 0x98>;
+				#reset-cells = <1>;
+			};
+
+			watchdog@2100 {
+				compatible = "amlogic,c3-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			periphs_pinctrl: pinctrl@4000 {
 				compatible = "amlogic,c3-periphs-pinctrl";
 				#address-cells = <2>;
 				#size-cells = <2>;
-				ranges;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x02de>;
 
-				gpio: bank@4000 {
-					reg = <0x0 0x4000 0x0 0x004c>,
-					      <0x0 0x4100 0x0 0x01de>;
+				gpio: bank@0 {
+					reg = <0x0 0x0 0x0 0x004c>,
+					      <0x0 0x100 0x0 0x01de>;
 					reg-names = "mux", "gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
 					gpio-ranges = <&periphs_pinctrl 0 0 55>;
 				};
+
+				i2c0_pins1: i2c0-pins1 {
+					mux {
+						groups = "i2c0_sda_e",
+							 "i2c0_scl_e";
+						function = "i2c0";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c0_pins2: i2c0-pins2 {
+					mux {
+						groups = "i2c0_sda_d",
+							 "i2c0_scl_d";
+						function = "i2c0";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins1: i2c1-pins1 {
+					mux {
+						groups = "i2c1_sda_x",
+							 "i2c1_scl_x";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins2: i2c1-pins2 {
+					mux {
+						groups = "i2c1_sda_d",
+							 "i2c1_scl_d";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins3: i2c1-pins3 {
+					mux {
+						groups = "i2c1_sda_a",
+							 "i2c1_scl_a";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins4: i2c1-pins4 {
+					mux {
+						groups = "i2c1_sda_b",
+							 "i2c1_scl_b";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_pins1: i2c2-pins1 {
+					mux {
+						groups = "i2c2_sda",
+							 "i2c2_scl";
+						function = "i2c2";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_pins1: i2c3-pins1 {
+					mux {
+						groups = "i2c3_sda_c",
+							 "i2c3_scl_c";
+						function = "i2c3";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_pins2: i2c3-pins2 {
+					mux {
+						groups = "i2c3_sda_x",
+							 "i2c3_scl_x";
+						function = "i2c3";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_pins3: i2c3-pins3 {
+					mux {
+						groups = "i2c3_sda_d",
+							 "i2c3_scl_d";
+						function = "i2c3";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				nand_pins: nand-pins {
+					mux {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "nand_ce0",
+							 "nand_ale",
+							 "nand_cle",
+							 "nand_wen_clk",
+							 "nand_ren_wr";
+						function = "nand";
+						input-enable;
+					};
+				};
+
+				sdcard_pins: sdcard-pins {
+					mux {
+						groups = "sdcard_d0",
+							 "sdcard_d1",
+							 "sdcard_d2",
+							 "sdcard_d3",
+							 "sdcard_clk",
+							 "sdcard_cmd";
+						function = "sdcard";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdcard_clk_gate_pins: sdcard-clk-cmd-pins {
+					mux {
+						groups = "GPIOC_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_m_clk_gate_pins: sdio-m-clk-cmd-pins {
+					mux {
+						groups = "sdio_clk";
+						function = "sdio";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_m_pins: sdio-m-all-pins {
+					mux {
+						groups = "sdio_d0",
+							 "sdio_d1",
+							 "sdio_d2",
+							 "sdio_d3",
+							 "sdio_clk",
+							 "sdio_cmd";
+						function = "sdio";
+						input-enable;
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				spicc0_pins1: spicc0-pins1 {
+					mux {
+						groups = "spi_a_mosi_b",
+							 "spi_a_miso_b",
+							 "spi_a_clk_b";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins2: spicc0-pins2 {
+					mux {
+						groups = "spi_a_mosi_c",
+							 "spi_a_miso_c",
+							 "spi_a_clk_c";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins3: spicc0-pins3 {
+					mux {
+						groups = "spi_a_mosi_x",
+							 "spi_a_miso_x",
+							 "spi_a_clk_x";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc1_pins1: spicc1-pins1 {
+					mux {
+						groups = "spi_b_mosi_d",
+							 "spi_b_miso_d",
+							 "spi_b_clk_d";
+						function = "spi_b";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc1_pins2: spicc1-pins2 {
+					mux {
+						groups = "spi_b_mosi_x",
+							 "spi_b_miso_x",
+							 "spi_b_clk_x";
+						function = "spi_b";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spifc_pins: spifc-pins {
+					mux {
+						groups = "spif_mo",
+							 "spif_mi",
+							 "spif_clk",
+							 "spif_cs",
+							 "spif_hold",
+							 "spif_wp",
+							 "spif_clk_loop";
+						function = "spif";
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				pwm_a_pins1: pwm-a-pins1 {
+					mux {
+						groups = "pwm_a";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_b_pins1: pwm-b-pins1 {
+					mux {
+						groups = "pwm_b";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_c_pins1: pwm-c-pins1 {
+					mux {
+						groups = "pwm_c";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_d_pins1: pwm-d-pins1 {
+					mux {
+						groups = "pwm_d";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins1: pwm-e-pins1 {
+					mux {
+						groups = "pwm_e";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_pins1: pwm-f-pins1 {
+					mux {
+						groups = "pwm_f";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_g_pins1: pwm-g-pins1 {
+					mux {
+						groups = "pwm_g_b";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins2: pwm-g-pins2 {
+					mux {
+						groups = "pwm_g_c";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins3: pwm-g-pins3 {
+					mux {
+						groups = "pwm_g_d";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins4: pwm-g-pins4 {
+					mux {
+						groups = "pwm_g_x0";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins5: pwm-g-pins5 {
+					mux {
+						groups = "pwm_g_x8";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_h_pins1: pwm-h-pins1 {
+					mux {
+						groups = "pwm_h_b";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_h_pins2: pwm-h-pins2 {
+					mux {
+						groups = "pwm_h_c";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_h_pins3: pwm-h-pins3 {
+					mux {
+						groups = "pwm_h_d";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_h_pins4: pwm-h-pins4 {
+					mux {
+						groups = "pwm_h_x1";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_h_pins5: pwm-h-pins5 {
+					mux {
+						groups = "pwm_h_x9";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_i_pins1: pwm-i-pins1 {
+					mux {
+						groups = "pwm_i_b";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins2: pwm-i-pins2 {
+					mux {
+						groups = "pwm_i_c";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins3: pwm-i-pins3 {
+					mux {
+						groups = "pwm_i_d";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins4: pwm-i-pins4 {
+					mux {
+						groups = "pwm_i_x2";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins5: pwm-i-pins5 {
+					mux {
+						groups = "pwm_i_x10";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_j_pins1: pwm-j-pins1 {
+					mux {
+						groups = "pwm_j_c";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_j_pins2: pwm-j-pins2 {
+					mux {
+						groups = "pwm_j_d";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_j_pins3: pwm-j-pins3 {
+					mux {
+						groups = "pwm_j_b";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_j_pins4: pwm-j-pins4 {
+					mux {
+						groups = "pwm_j_x3";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_j_pins5: pwm-j-pins5 {
+					mux {
+						groups = "pwm_j_x12";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_k_pins1: pwm-k-pins1 {
+					mux {
+						groups = "pwm_k_c";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_k_pins2: pwm-k-pins2 {
+					mux {
+						groups = "pwm_k_d";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_k_pins3: pwm-k-pins3 {
+					mux {
+						groups = "pwm_k_b";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_k_pins4: pwm-k-pins4 {
+					mux {
+						groups = "pwm_k_x4";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_k_pins5: pwm-k-pins5 {
+					mux {
+						groups = "pwm_k_x13";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_l_pins1: pwm-l-pins1 {
+					mux {
+						groups = "pwm_l_c";
+						function = "pwm_l";
+					};
+				};
+
+				pwm_l_pins2: pwm-l-pins2 {
+					mux {
+						groups = "pwm_l_x";
+						function = "pwm_l";
+					};
+				};
+
+				pwm_l_pins3: pwm-l-pins3 {
+					mux {
+						groups = "pwm_l_b";
+						function = "pwm_l";
+					};
+				};
+
+				pwm_l_pins4: pwm-l-pins4 {
+					mux {
+						groups = "pwm_l_a";
+						function = "pwm_l";
+					};
+				};
+
+				pwm_m_pins1: pwm-m-pins1 {
+					mux {
+						groups = "pwm_m_c";
+						function = "pwm_m";
+					};
+				};
+
+				pwm_m_pins2: pwm-m-pins2 {
+					mux {
+						groups = "pwm_m_x";
+						function = "pwm_m";
+					};
+				};
+
+				pwm_m_pins3: pwm-m-pins3 {
+					mux {
+						groups = "pwm_m_a";
+						function = "pwm_m";
+					};
+				};
+
+				pwm_m_pins4: pwm-m-pins4 {
+					mux {
+						groups = "pwm_m_b";
+						function = "pwm_m";
+					};
+				};
+
+				pwm_n_pins1: pwm-n-pins1 {
+					mux {
+						groups = "pwm_n_x";
+						function = "pwm_n";
+					};
+				};
+
+				pwm_n_pins2: pwm-n-pins2 {
+					mux {
+						groups = "pwm_n_a";
+						function = "pwm_n";
+					};
+				};
+
+				pwm_n_pins3: pwm-n-pins3 {
+					mux {
+						groups = "pwm_n_b";
+						function = "pwm_n";
+					};
+				};
 			};
 
 			gpio_intc: interrupt-controller@4080 {
-				compatible = "amlogic,meson-gpio-intc",
-					     "amlogic,c3-gpio-intc";
+				compatible = "amlogic,c3-gpio-intc", "amlogic,meson-gpio-intc";
 				reg = <0x0 0x4080 0x0 0x0020>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -107,16 +745,291 @@
 					<10 11 12 13 14 15 16 17 18 19 20 21>;
 			};
 
+			clkc_pll: clock-controller@8000 {
+				compatible = "amlogic,c3-pll-clkc";
+				reg = <0x0 0x8000 0x0 0x1a4>;
+				#clock-cells = <1>;
+				clocks = <&scmi_clk CLKID_TOP_PLL_OSC>,
+					 <&scmi_clk CLKID_MCLK_PLL_OSC>,
+					 <&scmi_clk CLKID_FIXED_PLL_OSC>;
+				clock-names = "top",
+					      "mclk",
+					      "fix";
+			};
+
+			eth_phy: mdio-multiplexer@28000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x28000 0x0 0xa4>;
+
+				clocks = <&clkc_periphs CLKID_SYS_ETH_PHY>,
+					 <&xtal>,
+					 <&clkc_pll CLKID_FCLK_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ext_mdio: mdio@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet_phy@8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+
+			clk_msr: clock-measure@48000 {
+				compatible = "amlogic,c3-clk-measure";
+				reg = <0x0 0x48000 0x0 0x1c>;
+			};
+
+			spicc0: spi@50000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x50000 0x0 0x44>;
+				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SYS_SPICC_0>,
+					 <&clkc_periphs CLKID_SPICC_A>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc1: spi@52000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x52000 0x0 0x44>;
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SYS_SPICC_1>,
+					 <&clkc_periphs CLKID_SPICC_B>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_mn: pwm@54000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x54000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_M>,
+					 <&clkc_periphs CLKID_PWM_N>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			spifc: spi@56000 {
+				compatible = "amlogic,a1-spifc";
+				reg = <0x0 0x56000 0x0 0x290>;
+				interrupts = <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SPIFC>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@58000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x58000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_A>,
+					 <&clkc_periphs CLKID_PWM_B>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@5a000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5a000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_C>,
+					 <&clkc_periphs CLKID_PWM_D>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@5c000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5c000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_E>,
+					 <&clkc_periphs CLKID_PWM_F>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_gh: pwm@5e000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5e000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_G>,
+					 <&clkc_periphs CLKID_PWM_H>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ij: pwm@60000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x60000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_I>,
+					 <&clkc_periphs CLKID_PWM_J>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_kl: pwm@62000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x62000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_K>,
+					 <&clkc_periphs CLKID_PWM_L>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@66000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x66000 0x0 0x24>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_A>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@68000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x68000 0x0 0x24>;
+				interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_B>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@6a000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6a000 0x0 0x24>;
+				interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_C>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@6c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6c000 0x0 0x24>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_D>;
+				status = "disabled";
+			};
+
 			uart_b: serial@7a000 {
 				compatible = "amlogic,meson-s4-uart",
 					   "amlogic,meson-ao-uart";
 				reg = <0x0 0x7a000 0x0 0x18>;
 				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
-				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clocks = <&xtal>, <&clkc_periphs CLKID_SYS_UART_B>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 			};
 
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,c3-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			sdio: mmc@88000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x88000 0x0 0x800>;
+				interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
+				power-domains = <&pwrc PWRC_C3_SDIOA_ID>;
+				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_A>,
+					  <&clkc_periphs CLKID_SD_EMMC_A>,
+					  <&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core","clkin0", "clkin1";
+				no-mmc;
+				no-sd;
+				resets = <&reset RESET_SD_EMMC_A>;
+				status = "disabled";
+			};
+
+			sd: mmc@8a000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x8a000 0x0 0x800>;
+				interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+				power-domains = <&pwrc PWRC_C3_SDCARD_ID>;
+				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_B>,
+					<&clkc_periphs CLKID_SD_EMMC_B>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "clkin0", "clkin1";
+				no-mmc;
+				no-sdio;
+				resets = <&reset RESET_SD_EMMC_B>;
+				status = "disabled";
+			};
+
+			nand: nand-controller@8d000 {
+				compatible = "amlogic,meson-axg-nfc";
+				reg = <0x0 0x8d000 0x0 0x200>,
+					<0x0 0x8C000 0x0 0x4>;
+				reg-names = "nfc", "emmc";
+				interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_C>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "device";
+				status = "disabled";
+			};
+
+			rtc@9a000 {
+				compatible = "amlogic,c3-rtc",
+					     "amlogic,a5-rtc";
+				reg = <0x0 0x9a000 0x0 0x38>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal_32k>, <&clkc_periphs CLKID_SYS_RTC>;
+				clock-names = "osc", "sys";
+			};
+		};
+
+		ethmac: ethernet@fdc00000 {
+			compatible = "amlogic,meson-g12a-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xfdc00000 0x0 0x10000>,
+			      <0x0 0xfe024000 0x0 0x8>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			power-domains = <&pwrc PWRC_C3_ETH_ID>;
+			clocks = <&clkc_periphs CLKID_SYS_ETH_MAC>,
+				 <&clkc_pll CLKID_FCLK_DIV2>,
+				 <&clkc_pll CLKID_FCLK_50M>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts b/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts
new file mode 100644
index 000000000000..c45b22651798
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s6.dtsi"
+/ {
+	model = "Amlogic S905X5 BL209 Development Board";
+	compatible = "amlogic,bl209", "amlogic,s6";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x000000 0x0 0xe0000000>,
+		      <0x1 0x000000 0x0 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 27 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x1b00000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
new file mode 100644
index 000000000000..5f602f1170c0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@ff200000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xff200000 0 0x10000>,
+			      <0x0 0xff240000 0 0x80000>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s6-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,pinctrl-s6";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+				gpioz: gpio@c0 {
+					reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 16>;
+				};
+
+				gpiox: gpio@100 {
+					reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+				};
+
+				gpioh: gpio@140 {
+					reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 9>;
+				};
+
+				gpiod: gpio@180 {
+					reg = <0 0x180 0 0x20>, <0 0x8 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 7>;
+				};
+
+				gpiof: gpio@1a0 {
+					reg = <0 0x1a0 0 0x20>, <0 0x20 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_F<<8) 5>;
+				};
+
+				gpioe: gpio@1c0 {
+					reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 3>;
+				};
+
+				gpioc: gpio@200 {
+					reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+				};
+
+				gpiob: gpio@240 {
+					reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+				};
+
+				gpioa: gpio@280 {
+					reg = <0 0x280 0 0x20>, <0 0x40 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_A<<8) 16>;
+				};
+
+				test_n: gpio@2c0 {
+					reg = <0 0x2c0 0 0x20>;
+					reg-names = "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges =
+						<&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+				};
+
+				gpiocc: gpio@300 {
+					reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts b/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts
new file mode 100644
index 000000000000..7fd4ac9321a6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s7.dtsi"
+/ {
+	model = "Amlogic S805X3 BP201 Development Board";
+	compatible = "amlogic,bp201", "amlogic,s7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 35 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x2300000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
new file mode 100644
index 000000000000..d262c0b66e4b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>; /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s7-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,pinctrl-s7";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+				gpioz: gpio@c0 {
+					reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>;
+				};
+
+				gpiox: gpio@100 {
+					reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+				};
+
+				gpioh: gpio@140 {
+					reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>;
+				};
+
+				gpiod: gpio@180 {
+					reg = <0 0x180 0 0x20>, <0 0x40 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 12>;
+				};
+
+				gpioe: gpio@1c0 {
+					reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+				};
+
+				gpioc: gpio@200 {
+					reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+				};
+
+				gpiob: gpio@240 {
+					reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+				};
+
+				test_n: gpio@2c0 {
+					reg = <0 0x2c0 0 0x20>;
+					reg-names = "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges =
+						<&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+				};
+
+				gpiocc: gpio@300 {
+					reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts b/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts
new file mode 100644
index 000000000000..2933fcdbc8ef
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s7d.dtsi"
+/ {
+	model = "Amlogic S905X5M BM202 Development Board";
+	compatible = "amlogic,bm202", "amlogic,s7d";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 36 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x2400000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
new file mode 100644
index 000000000000..c4d260d5bb58
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s7d-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,pinctrl-s7d",
+					     "amlogic,pinctrl-s7";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+				gpioz: gpio@c0 {
+					reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>;
+				};
+
+				gpiox: gpio@100 {
+					reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+				};
+
+				gpioh: gpio@140 {
+					reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>;
+				};
+
+				gpiod: gpio@180 {
+					reg = <0 0x180 0 0x20>, <0 0x40 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 5>;
+				};
+
+				gpioe: gpio@1c0 {
+					reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+				};
+
+				gpioc: gpio@200 {
+					reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+				};
+
+				gpiob: gpio@240 {
+					reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+				};
+
+				gpiodv: gpio@280 {
+					reg = <0 0x280 0 0x20>, <0 0x8 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_DV<<8) 7>;
+				};
+
+				test_n: gpio@2c0 {
+					reg = <0 0x2c0 0 0x20>;
+					reg-names = "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges =
+						<&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+				};
+
+				gpiocc: gpio@300 {
+					reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-reset.h b/arch/arm64/boot/dts/amlogic/amlogic-t7-reset.h
new file mode 100644
index 000000000000..ec90a11df508
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-reset.h
@@ -0,0 +1,197 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_T7_RESET_H
+#define __DTS_AMLOGIC_T7_RESET_H
+
+/* RESET0 */
+/*					0-3	*/
+#define RESET_USB			4
+#define RESET_U2DRD			5
+#define RESET_U3DRD			6
+#define RESET_U3DRD_PIPE0		7
+#define RESET_U2PHY20			8
+#define RESET_U2PHY21			9
+#define RESET_GDC			10
+#define RESET_HDMI20_AES		11
+#define RESET_HDMIRX			12
+#define RESET_HDMIRX_APB		13
+#define RESET_DEWARP			14
+/*					15	*/
+#define RESET_HDMITX_CAPB3		16
+#define RESET_BRG_VCBUG_DEC		17
+#define RESET_VCBUS			18
+#define RESET_VID_PLL_DIV		19
+#define RESET_VDI6			20
+#define RESET_GE2D			21
+#define RESET_HDMITXPHY			22
+#define RESET_VID_LOCK			23
+#define RESET_VENC0			24
+#define RESET_VDAC			25
+#define RESET_VENC2			26
+#define RESET_VENC1			27
+#define RESET_RDMA			28
+#define RESET_HDMITX			29
+#define RESET_VIU			30
+#define RESET_VENC			31
+
+/* RESET1 */
+#define RESET_AUDIO			32
+#define RESET_MALI_CAPB3		33
+#define RESET_MALI			34
+#define RESET_DDR_APB			35
+#define RESET_DDR			36
+#define RESET_DOS_CAPB3			37
+#define RESET_DOS			38
+#define RESET_COMBO_DPHY_CHAN2		39
+#define RESET_DEBUG_B			40
+#define RESET_DEBUG_A			41
+#define RESET_DSP_B			42
+#define RESET_DSP_A			43
+#define RESET_PCIE_A			44
+#define RESET_PCIE_PHY			45
+#define RESET_PCIE_APB			46
+#define RESET_ANAKIN			47
+#define RESET_ETH			48
+#define RESET_EDP0_CTRL			49
+#define RESET_EDP1_CTRL			50
+#define RESET_COMBO_DPHY_CHAN0		51
+#define RESET_COMBO_DPHY_CHAN1		52
+#define RESET_DSI_LVDS_EDP_TOP		53
+#define RESET_PCIE1_PHY			54
+#define RESET_PCIE1_APB			55
+#define RESET_DDR_1			56
+/*					57	*/
+#define RESET_EDP1_PIPELINE		58
+#define RESET_EDP0_PIPELINE		59
+#define RESET_MIPI_DSI1_PHY		60
+#define RESET_MIPI_DSI0_PHY		61
+#define RESET_MIPI_DSI_A_HOST		62
+#define RESET_MIPI_DSI_B_HOST		63
+
+/* RESET2 */
+#define RESET_DEVICE_MMC_ARB		64
+#define RESET_IR_CTRL			65
+#define RESET_TS_A73			66
+#define RESET_TS_A53			67
+#define RESET_SPICC_2			68
+#define RESET_SPICC_3			69
+#define RESET_SPICC_4			70
+#define RESET_SPICC_5			71
+#define RESET_SMART_CARD		72
+#define RESET_SPICC_0			73
+#define RESET_SPICC_1			74
+#define RESET_RSA			75
+/*					76-79	*/
+#define RESET_MSR_CLK			80
+#define RESET_SPIFC			81
+#define RESET_SAR_ADC			82
+#define RESET_BT			83
+/*					84-87	*/
+#define RESET_ACODEC			88
+#define RESET_CEC			89
+#define RESET_AFIFO			90
+#define RESET_WATCHDOG			91
+/*					92-95	*/
+
+/* RESET3 */
+#define RESET_BRG_NIC1_GPV		96
+#define RESET_BRG_NIC2_GPV		97
+#define RESET_BRG_NIC3_GPV		98
+#define RESET_BRG_NIC4_GPV		99
+#define RESET_BRG_NIC5_GPV		100
+/*					101-121	*/
+#define RESET_MIPI_ISP			122
+#define RESET_BRG_ADB_MALI_1		123
+#define RESET_BRG_ADB_MALI_0		124
+#define RESET_BRG_ADB_A73		125
+#define RESET_BRG_ADB_A53		126
+#define RESET_BRG_CCI			127
+
+/* RESET4 */
+#define RESET_PWM_AO_AB			128
+#define RESET_PWM_AO_CD			129
+#define RESET_PWM_AO_EF			130
+#define RESET_PWM_AO_GH			131
+#define RESET_PWM_AB			132
+#define RESET_PWM_CD			133
+#define RESET_PWM_EF			134
+/*					135-137	*/
+#define RESET_UART_A			138
+#define RESET_UART_B			139
+#define RESET_UART_C			140
+#define RESET_UART_D			141
+#define RESET_UART_E			142
+#define RESET_UART_F			143
+#define RESET_I2C_S_A			144
+#define RESET_I2C_M_A			145
+#define RESET_I2C_M_B			146
+#define RESET_I2C_M_C			147
+#define RESET_I2C_M_D			148
+#define RESET_I2C_M_E			149
+#define RESET_I2C_M_F			150
+#define RESET_I2C_M_AO_A		151
+#define RESET_SD_EMMC_A			152
+#define RESET_SD_EMMC_B			153
+#define RESET_SD_EMMC_C			154
+#define RESET_I2C_M_AO_B		155
+#define RESET_TS_GPU			156
+#define RESET_TS_NNA			157
+#define RESET_TS_VPN			158
+#define RESET_TS_HEVC			159
+
+/* RESET5 */
+#define RESET_BRG_NOC_DDR_1		160
+#define RESET_BRG_NOC_DDR_0		161
+#define RESET_BRG_NOC_MAIN		162
+#define RESET_BRG_NOC_ALL		163
+/*					164-167	*/
+#define RESET_BRG_NIC2_SYS		168
+#define RESET_BRG_NIC2_MAIN		169
+#define RESET_BRG_NIC2_HDMI		170
+#define RESET_BRG_NIC2_ALL		171
+#define RESET_BRG_NIC3_WAVE		172
+#define RESET_BRG_NIC3_VDEC		173
+#define RESET_BRG_NIC3_HEVCF		174
+#define RESET_BRG_NIC3_HEVCB		175
+#define RESET_BRG_NIC3_HCODEC		176
+#define RESET_BRG_NIC3_GE2D		177
+#define RESET_BRG_NIC3_GDC		178
+#define RESET_BRG_NIC3_AMLOGIC		179
+#define RESET_BRG_NIC3_MAIN		180
+#define RESET_BRG_NIC3_ALL		181
+#define RESET_BRG_NIC5_VPU		182
+/*					183-185	*/
+#define RESET_BRG_NIC4_DSPB		186
+#define RESET_BRG_NIC4_DSPA		187
+#define RESET_BRG_NIC4_VAPB		188
+#define RESET_BRG_NIC4_CLK81		189
+#define RESET_BRG_NIC4_MAIN		190
+#define RESET_BRG_NIC4_ALL		191
+
+/* RESET6 */
+#define RESET_BRG_VDEC_PIPEL		192
+#define RESET_BRG_HEVCF_DMC_PIPEL	193
+#define RESET_BRG_NIC2TONIC4_PIPEL	194
+#define RESET_BRG_HDMIRXTONIC2_PIPEL	195
+#define RESET_BRG_SECTONIC4_PIPEL	196
+#define RESET_BRG_VPUTONOC_PIPEL	197
+#define RESET_BRG_NIC4TONOC_PIPEL	198
+#define RESET_BRG_NIC3TONOC_PIPEL	199
+#define RESET_BRG_NIC2TONOC_PIPEL	200
+#define RESET_BRG_NNATONOC_PIPEL	201
+#define RESET_BRG_FRISP3_PIPEL		202
+#define RESET_BRG_FRISP2_PIPEL		203
+#define RESET_BRG_FRISP1_PIPEL		204
+#define RESET_BRG_FRISP0_PIPEL		205
+/*					206-217	*/
+#define RESET_BRG_AMPIPE_NAND		218
+#define RESET_BRG_AMPIPE_ETH		219
+/*					220	*/
+#define RESET_BRG_AM2AXI0		221
+#define RESET_BRG_AM2AXI1		222
+#define RESET_BRG_AM2AXI2		223
+
+#endif /* ___DTS_AMLOGIC_T7_RESET_H */
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
index a03c7667d2b6..6510068bcff9 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/amlogic,t7-pwrc.h>
+#include "amlogic-t7-reset.h"
 
 / {
 	interrupt-parent = <&gic>;
@@ -52,13 +53,27 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
-		cpu101: cpu@101{
+		cpu101: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu102: cpu@102 {
@@ -66,6 +81,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu103: cpu@103 {
@@ -73,6 +95,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu0: cpu@0 {
@@ -80,6 +109,13 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 		};
 
 		cpu1: cpu@1 {
@@ -87,6 +123,13 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 		};
 
 		cpu2: cpu@2 {
@@ -94,6 +137,13 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 		};
 
 		cpu3: cpu@3 {
@@ -101,6 +151,31 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
+		};
+
+		l2_cache_l: l2-cache-cluster0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;  /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+
+		l2_cache_b: l2-cache-cluster1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>; /* L2. 1 Mb */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -149,6 +224,12 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			reset: reset-controller@2000 {
+				compatible = "amlogic,t7-reset";
+				reg = <0x0 0x2000 0x0 0x98>;
+				#reset-cells = <1>;
+			};
+
 			watchdog@2100 {
 				compatible = "amlogic,t7-wdt";
 				reg = <0x0 0x2100 0x0 0x10>;
@@ -171,12 +252,30 @@
 				};
 			};
 
+			gpio_intc: interrupt-controller@4080 {
+				compatible = "amlogic,t7-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x4080 0x0 0x20>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<10 11 12 13 14 15 16 17 18 19 20 21>;
+			};
+
 			uart_a: serial@78000 {
 				compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
 				reg = <0x0 0x78000 0x0 0x18>;
 				interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
+
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,t7-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
 		};
 
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts
index 1c20516fa653..0d92f5253b64 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "meson-a1.dtsi"
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "amlogic,ad402", "amlogic,a1";
@@ -83,6 +84,50 @@
 		vin-supply = <&vddao_3v3>;
 		regulator-always-on;
 	};
+
+	thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			sustainable-power = <130>;
+
+			thermal-sensors = <&cpu_temp>;
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <85000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			soc_cooling_maps: cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
 
 /* Bluetooth HCI H4 */
@@ -106,7 +151,7 @@
 	pinctrl-0 = <&spifc_pins>;
 	pinctrl-names = "default";
 
-	spi_nand@0 {
+	flash@0 {
 		compatible = "spi-nand";
 		status = "okay";
 		reg = <0>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 648e7f49424f..27b68ed85c4c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -27,7 +27,14 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -35,13 +42,23 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -231,6 +248,7 @@
 						groups = "uart_a_tx",
 							 "uart_a_rx";
 						function = "uart_a";
+						bias-pull-up;
 					};
 				};
 
@@ -243,6 +261,188 @@
 					};
 				};
 
+				pwm_a_pins1: pwm-a-pins1 {
+					mux {
+						groups = "pwm_a_x6";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins2: pwm-a-pins2 {
+					mux {
+						groups = "pwm_a_x7";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins3: pwm-a-pins3 {
+					mux {
+						groups = "pwm_a_f10";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins4: pwm-a-pins4 {
+					mux {
+						groups = "pwm_a_f6";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins5: pwm-a-pins5 {
+					mux {
+						groups = "pwm_a_a";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_b_pins1: pwm-b-pins1 {
+					mux {
+						groups = "pwm_b_x";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_pins2: pwm-b-pins2 {
+					mux {
+						groups = "pwm_b_f";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_pins3: pwm-b-pins3 {
+					mux {
+						groups = "pwm_b_a";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_c_pins1: pwm-c-pins1 {
+					mux {
+						groups = "pwm_c_x";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins2: pwm-c-pins2 {
+					mux {
+						groups = "pwm_c_f3";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins3: pwm-c-pins3 {
+					mux {
+						groups = "pwm_c_f8";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins4: pwm-c-pins4 {
+					mux {
+						groups = "pwm_c_a";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_d_pins1: pwm-d-pins1 {
+					mux {
+						groups = "pwm_d_x15";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins2: pwm-d-pins2 {
+					mux {
+						groups = "pwm_d_x13";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins3: pwm-d-pins3 {
+					mux {
+						groups = "pwm_d_x10";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins4: pwm-d-pins4 {
+					mux {
+						groups = "pwm_d_f";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins1: pwm-e-pins1 {
+					mux {
+						groups = "pwm_e_p";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins2: pwm-e-pins2 {
+					mux {
+						groups = "pwm_e_x16";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins3: pwm-e-pins3 {
+					mux {
+						groups = "pwm_e_x14";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins4: pwm-e-pins4 {
+					mux {
+						groups = "pwm_e_x2";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins5: pwm-e-pins5 {
+					mux {
+						groups = "pwm_e_f";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins6: pwm-e-pins6 {
+					mux {
+						groups = "pwm_e_a";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_pins1: pwm-f-pins1 {
+					mux {
+						groups = "pwm_f_b";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins2: pwm-f-pins2 {
+					mux {
+						groups = "pwm_f_x";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins3: pwm-f-pins3 {
+					mux {
+						groups = "pwm_f_f4";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins4: pwm-f-pins4 {
+					mux {
+						groups = "pwm_f_f12";
+						function = "pwm_f";
+					};
+				};
+
 				sdio_pins: sdio {
 					mux0 {
 						groups = "sdcard_d0_x",
@@ -338,6 +538,28 @@
 				status = "disabled";
 			};
 
+			pwm_ab: pwm@2400 {
+				compatible = "amlogic,meson-a1-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x2400 0x0 0x24>;
+				#pwm-cells = <3>;
+				clocks = <&clkc_periphs CLKID_PWM_A>,
+					 <&clkc_periphs CLKID_PWM_B>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@2800 {
+				compatible = "amlogic,meson-a1-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x2800 0x0 0x24>;
+				#pwm-cells = <3>;
+				clocks = <&clkc_periphs CLKID_PWM_C>,
+					 <&clkc_periphs CLKID_PWM_D>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+				status = "disabled";
+			};
+
 			saradc: adc@2c00 {
 				compatible = "amlogic,meson-g12a-saradc",
 					"amlogic,meson-saradc";
@@ -398,6 +620,18 @@
 				power-domains = <&pwrc PWRC_USB_ID>;
 			};
 
+			cpu_temp: temperature-sensor@4c00 {
+				compatible = "amlogic,a1-cpu-thermal";
+				reg = <0x0 0x4c00 0x0 0x50>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_TS>;
+				assigned-clocks = <&clkc_periphs CLKID_TS>;
+				assigned-clock-rates = <500000>;
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+			};
+
 			hwrng: rng@5118 {
 				compatible = "amlogic,meson-rng";
 				reg = <0x0 0x5118 0x0 0x4>;
@@ -410,6 +644,17 @@
 				amlogic,has-chip-id;
 			};
 
+			pwm_ef: pwm@5400 {
+				compatible = "amlogic,meson-a1-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5400 0x0 0x24>;
+				#pwm-cells = <3>;
+				clocks = <&clkc_periphs CLKID_PWM_E>,
+					 <&clkc_periphs CLKID_PWM_F>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+				status = "disabled";
+			};
+
 			clkc_pll: pll-clock-controller@7c80 {
 				compatible = "amlogic,a1-pll-clkc";
 				reg = <0 0x7c80 0 0x18c>;
@@ -419,7 +664,7 @@
 				clock-names = "fixpll_in", "hifipll_in";
 			};
 
-			sd_emmc: sd@10000 {
+			sd_emmc: mmc@10000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x10000 0x0 0x800>;
 				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -450,8 +695,9 @@
 				 <&clkc_periphs CLKID_USB_BUS>,
 				 <&clkc_periphs CLKID_USB_CTRL_IN>;
 			clock-names = "usb_ctrl", "usb_bus", "xtal_usb_ctrl";
+			assigned-clocks = <&clkc_periphs CLKID_USB_BUS>;
+			assigned-clock-rates = <64000000>;
 			resets = <&reset RESET_USBCTRL>;
-			reset-name = "usb_ctrl";
 
 			dr_mode = "otg";
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
index 0062667c4f65..8a18ce948450 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
@@ -30,8 +30,20 @@
 &uart_B {
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&i2c_AO {
+	/* EEPROM on base board */
+	eeprompd: eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <0x20>;
+		label = "eeprompd";
+		address-width = <0x10>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
index c2d22b00c1cd..c356bd2cc63a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
@@ -25,3 +25,15 @@
 &sd_emmc_b {
 	broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
 };
+
+&i2c_AO {
+	/* EEPROM on base board */
+	eeprompd: eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <0x20>;
+		label = "eeprompd";
+		address-width = <0x10>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
index db605f3a22b4..9b65ae818e2f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -35,7 +35,7 @@
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -44,7 +44,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC5V";
 		regulator-min-microvolt = <5000000>;
@@ -52,7 +52,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -61,7 +61,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -70,7 +70,7 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <3300000>;
@@ -79,7 +79,7 @@
 		regulator-always-on;
 	};
 
-	vccq_1v8: regulator-vccq_1v8 {
+	vccq_1v8: regulator-vccq-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCCQ_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -88,7 +88,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr: regulator-usb_pwr {
+	usb_pwr: regulator-usb-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR";
 		regulator-min-microvolt = <5000000>;
@@ -332,19 +332,3 @@
 		"", "", "", "", "", // 80 - 84
 		"", ""; // 85-86
 };
-
-&cpu0 {
-	#cooling-cells = <2>;
-};
-
-&cpu1 {
-	#cooling-cells = <2>;
-};
-
-&cpu2 {
-	#cooling-cells = <2>;
-};
-
-&cpu3 {
-	#cooling-cells = <2>;
-};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index df16eead2c80..9611775b81ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -12,7 +12,7 @@
 	compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
 	model = "Amlogic Meson AXG S400 Development Board";
 
-	adc_keys {
+	keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
 		io-channel-names = "buttons";
@@ -66,7 +66,6 @@
 		VDDA-supply = <&vcc_3v3>;
 		VDDP-supply = <&vcc_3v3>;
 		VDDD-supply = <&vcc_3v3>;
-		status = "okay";
 		sound-name-prefix = "Linein";
 	};
 
@@ -75,14 +74,12 @@
 		compatible = "everest,es7154";
 		VDD-supply = <&vcc_3v3>;
 		PVDD-supply = <&vcc_5v>;
-		status = "okay";
 		sound-name-prefix = "Lineout";
 	};
 
 	spdif_dit: audio-codec-2 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -91,14 +88,12 @@
 		compatible = "dmic-codec";
 		num-channels = <7>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
 	spdif_dir: audio-codec-4 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dir";
-		status = "okay";
 		sound-name-prefix = "DIR";
 	};
 
@@ -116,7 +111,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -124,7 +119,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -133,7 +128,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC5V";
 		regulator-min-microvolt = <5000000>;
@@ -144,7 +139,7 @@
 		enable-active-high;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -153,7 +148,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -162,7 +157,7 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
@@ -171,7 +166,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr: regulator-usb_pwr {
+	usb_pwr: regulator-usb-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR";
 		regulator-min-microvolt = <5000000>;
@@ -273,6 +268,10 @@
 				"Speaker1 Right", "SPK1 OUT_D",
 				"Linein AINL", "Linein",
 				"Linein AINR", "Linein";
+		clocks = <&clkc CLKID_HIFI_PLL>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_HIFI_PLL>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index a49aa62e3f9f..04fb130ac7c6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -25,10 +25,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_A";
-		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -36,10 +36,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_B";
-		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -47,10 +47,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_C";
-		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -74,6 +74,8 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			dynamic-power-coefficient = <140>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -81,8 +83,16 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			dynamic-power-coefficient = <140>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -90,8 +100,16 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			dynamic-power-coefficient = <140>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -99,14 +117,25 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			dynamic-power-coefficient = <140>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -432,6 +461,27 @@
 					};
 				};
 
+				nand_all_pins: nand-all-pins {
+					mux {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "nand_ce0",
+							 "nand_ale",
+							 "nand_cle",
+							 "nand_wen_clk",
+							 "nand_ren_wr";
+						function = "nand";
+						input-enable;
+						bias-pull-up;
+					};
+				};
+
 				emmc_ds_pins: emmc_ds {
 					mux {
 						groups = "emmc_ds";
@@ -1135,7 +1185,7 @@
 						groups = "uart_tx_a",
 							 "uart_rx_a";
 						function = "uart_a";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1153,7 +1203,7 @@
 						groups = "uart_tx_b_x",
 							 "uart_rx_b_x";
 						function = "uart_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1171,7 +1221,7 @@
 						groups = "uart_tx_b_z",
 							 "uart_rx_b_z";
 						function = "uart_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1189,7 +1239,7 @@
 						groups = "uart_ao_tx_b_z",
 							 "uart_ao_rx_b_z";
 						function = "uart_ao_b_z";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1625,7 +1675,7 @@
 						groups = "uart_ao_tx_a",
 							 "uart_ao_rx_a";
 						function = "uart_ao_a";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1643,7 +1693,7 @@
 						groups = "uart_ao_tx_b",
 							 "uart_ao_rx_b";
 						function = "uart_ao_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1664,8 +1714,12 @@
 			};
 
 			pwm_AO_cd: pwm@2000 {
-				compatible = "amlogic,meson-axg-ao-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x02000  0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV5>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -1699,8 +1753,12 @@
 			};
 
 			pwm_AO_ab: pwm@7000 {
-				compatible = "amlogic,meson-axg-ao-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x07000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV5>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -1777,15 +1835,23 @@
 			};
 
 			pwm_ab: pwm@1b000 {
-				compatible = "amlogic,meson-axg-ee-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1b000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc CLKID_FCLK_DIV5>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_cd: pwm@1a000 {
-				compatible = "amlogic,meson-axg-ee-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1a000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc CLKID_FCLK_DIV5>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -1913,6 +1979,8 @@
 				reg = <0x0 0x7800 0x0 0x100>,
 				      <0x0 0x7000 0x0 0x800>;
 				reg-names = "nfc", "emmc";
+				pinctrl-0 = <&nand_all_pins>;
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index ff68b911b729..dcc927a9da80 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -215,6 +215,11 @@
 				#sound-dai-cells = <0>;
 				status = "disabled";
 
+				assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+						  <&clkc CLKID_HDMI>;
+				assigned-clock-parents = <&xtal>, <0>;
+				assigned-clock-rates = <0>, <24000000>;
+
 				/* VPU VENC Input */
 				hdmi_tx_venc_port: port@0 {
 					reg = <0>;
@@ -987,7 +992,7 @@
 						mux {
 							groups = "spdif_out_h";
 							function = "spdif_out";
-							drive-strength-microamp = <500>;
+							drive-strength-microamp = <3000>;
 							bias-disable;
 						};
 					};
@@ -996,7 +1001,7 @@
 						mux {
 							groups = "spdif_out_a11";
 							function = "spdif_out";
-							drive-strength-microamp = <500>;
+							drive-strength-microamp = <3000>;
 							bias-disable;
 						};
 					};
@@ -1005,7 +1010,7 @@
 						mux {
 							groups = "spdif_out_a13";
 							function = "spdif_out";
-							drive-strength-microamp = <500>;
+							drive-strength-microamp = <3000>;
 							bias-disable;
 						};
 					};
@@ -1498,7 +1503,7 @@
 							groups = "uart_a_tx",
 								 "uart_a_rx";
 							function = "uart_a";
-							bias-disable;
+							bias-pull-up;
 						};
 					};
 
@@ -1516,7 +1521,7 @@
 							groups = "uart_b_tx",
 								 "uart_b_rx";
 							function = "uart_b";
-							bias-disable;
+							bias-pull-up;
 						};
 					};
 
@@ -1663,9 +1668,28 @@
 								       <250000000>,
 								       <0>; /* Do Nothing */
 					};
+
+					mipi_analog_dphy: phy {
+						compatible = "amlogic,g12a-mipi-dphy-analog";
+						#phy-cells = <0>;
+						status = "disabled";
+					};
 				};
 			};
 
+			mipi_dphy: phy@44000 {
+				compatible = "amlogic,axg-mipi-dphy";
+				reg = <0x0 0x44000 0x0 0x2000>;
+				clocks = <&clkc CLKID_MIPI_DSI_PHY>;
+				clock-names = "pclk";
+				resets = <&reset RESET_MIPI_DSI_PHY>;
+				reset-names = "phy";
+				phys = <&mipi_analog_dphy>;
+				phy-names = "analog";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
 			usb3_pcie_phy: phy@46000 {
 				compatible = "amlogic,g12a-usb3-pcie-phy";
 				reg = <0x0 0x46000 0x0 0x2000>;
@@ -1722,9 +1746,6 @@
 				compatible = "amlogic,meson-gx-ao-sysctrl",
 					     "simple-mfd", "syscon";
 				reg = <0x0 0x0 0x0 0x100>;
-				#address-cells = <2>;
-				#size-cells = <2>;
-				ranges = <0x0 0x0 0x0 0x0 0x0 0x100>;
 
 				clkc_AO: clock-controller {
 					compatible = "amlogic,meson-g12a-aoclkc";
@@ -1733,278 +1754,278 @@
 					clocks = <&xtal>, <&clkc CLKID_CLK81>;
 					clock-names = "xtal", "mpeg-clk";
 				};
+			};
 
-				ao_pinctrl: pinctrl {
-					compatible = "amlogic,meson-g12a-aobus-pinctrl";
-					#address-cells = <2>;
-					#size-cells = <2>;
-					ranges;
+			ao_pinctrl: pinctrl@14 {
+				compatible = "amlogic,meson-g12a-aobus-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio_ao: bank@14 {
+					reg = <0x0 0x14 0x0 0x8>,
+					      <0x0 0x1c 0x0 0x8>,
+					      <0x0 0x24 0x0 0x14>;
+					reg-names = "mux",
+						    "ds",
+						    "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&ao_pinctrl 0 0 15>;
+				};
 
-					gpio_ao: bank@14 {
-						reg = <0x0 0x14 0x0 0x8>,
-						      <0x0 0x1c 0x0 0x8>,
-						      <0x0 0x24 0x0 0x14>;
-						reg-names = "mux",
-							    "ds",
-							    "gpio";
-						gpio-controller;
-						#gpio-cells = <2>;
-						gpio-ranges = <&ao_pinctrl 0 0 15>;
+				i2c_ao_sck_pins: i2c_ao_sck_pins {
+					mux {
+						groups = "i2c_ao_sck";
+						function = "i2c_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					i2c_ao_sck_pins: i2c_ao_sck_pins {
-						mux {
-							groups = "i2c_ao_sck";
-							function = "i2c_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				i2c_ao_sda_pins: i2c_ao_sda {
+					mux {
+						groups = "i2c_ao_sda";
+						function = "i2c_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					i2c_ao_sda_pins: i2c_ao_sda {
-						mux {
-							groups = "i2c_ao_sda";
-							function = "i2c_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				i2c_ao_sck_e_pins: i2c_ao_sck_e {
+					mux {
+						groups = "i2c_ao_sck_e";
+						function = "i2c_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					i2c_ao_sck_e_pins: i2c_ao_sck_e {
-						mux {
-							groups = "i2c_ao_sck_e";
-							function = "i2c_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
-					};
-
-					i2c_ao_sda_e_pins: i2c_ao_sda_e {
-						mux {
-							groups = "i2c_ao_sda_e";
-							function = "i2c_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				i2c_ao_sda_e_pins: i2c_ao_sda_e {
+					mux {
+						groups = "i2c_ao_sda_e";
+						function = "i2c_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					mclk0_ao_pins: mclk0-ao {
-						mux {
-							groups = "mclk0_ao";
-							function = "mclk0_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				mclk0_ao_pins: mclk0-ao {
+					mux {
+						groups = "mclk0_ao";
+						function = "mclk0_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_din0_pins: tdm-ao-b-din0 {
-						mux {
-							groups = "tdm_ao_b_din0";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_din0_pins: tdm-ao-b-din0 {
+					mux {
+						groups = "tdm_ao_b_din0";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					spdif_ao_out_pins: spdif-ao-out {
-						mux {
-							groups = "spdif_ao_out";
-							function = "spdif_ao_out";
-							drive-strength-microamp = <500>;
-							bias-disable;
-						};
+				spdif_ao_out_pins: spdif-ao-out {
+					mux {
+						groups = "spdif_ao_out";
+						function = "spdif_ao_out";
+						drive-strength-microamp = <3000>;
+						bias-disable;
 					};
+				};
 
-					tdm_ao_b_din1_pins: tdm-ao-b-din1 {
-						mux {
-							groups = "tdm_ao_b_din1";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_din1_pins: tdm-ao-b-din1 {
+					mux {
+						groups = "tdm_ao_b_din1";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					tdm_ao_b_din2_pins: tdm-ao-b-din2 {
-						mux {
-							groups = "tdm_ao_b_din2";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_din2_pins: tdm-ao-b-din2 {
+					mux {
+						groups = "tdm_ao_b_din2";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					tdm_ao_b_dout0_pins: tdm-ao-b-dout0 {
-						mux {
-							groups = "tdm_ao_b_dout0";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_dout0_pins: tdm-ao-b-dout0 {
+					mux {
+						groups = "tdm_ao_b_dout0";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_dout1_pins: tdm-ao-b-dout1 {
-						mux {
-							groups = "tdm_ao_b_dout1";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_dout1_pins: tdm-ao-b-dout1 {
+					mux {
+						groups = "tdm_ao_b_dout1";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_dout2_pins: tdm-ao-b-dout2 {
-						mux {
-							groups = "tdm_ao_b_dout2";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_dout2_pins: tdm-ao-b-dout2 {
+					mux {
+						groups = "tdm_ao_b_dout2";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_fs_pins: tdm-ao-b-fs {
-						mux {
-							groups = "tdm_ao_b_fs";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_fs_pins: tdm-ao-b-fs {
+					mux {
+						groups = "tdm_ao_b_fs";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_sclk_pins: tdm-ao-b-sclk {
-						mux {
-							groups = "tdm_ao_b_sclk";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_sclk_pins: tdm-ao-b-sclk {
+					mux {
+						groups = "tdm_ao_b_sclk";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
-						mux {
-							groups = "tdm_ao_b_slv_fs";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
+					mux {
+						groups = "tdm_ao_b_slv_fs";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
-						mux {
-							groups = "tdm_ao_b_slv_sclk";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
+					mux {
+						groups = "tdm_ao_b_slv_sclk";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					uart_ao_a_pins: uart-a-ao {
-						mux {
-							groups = "uart_ao_a_tx",
-								 "uart_ao_a_rx";
-							function = "uart_ao_a";
-							bias-disable;
-						};
+				uart_ao_a_pins: uart-ao-a {
+					mux {
+						groups = "uart_ao_a_tx",
+							 "uart_ao_a_rx";
+						function = "uart_ao_a";
+						bias-pull-up;
 					};
+				};
 
-					uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts {
-						mux {
-							groups = "uart_ao_a_cts",
-								 "uart_ao_a_rts";
-							function = "uart_ao_a";
-							bias-disable;
-						};
+				uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts {
+					mux {
+						groups = "uart_ao_a_cts",
+							 "uart_ao_a_rts";
+						function = "uart_ao_a";
+						bias-disable;
 					};
+				};
 
-					uart_ao_b_2_3_pins: uart-ao-b-2-3 {
-						mux {
-							groups = "uart_ao_b_tx_2",
-								 "uart_ao_b_rx_3";
-							function = "uart_ao_b";
-							bias-disable;
-						};
+				uart_ao_b_2_3_pins: uart-ao-b-2-3 {
+					mux {
+						groups = "uart_ao_b_tx_2",
+							 "uart_ao_b_rx_3";
+						function = "uart_ao_b";
+						bias-pull-up;
 					};
+				};
 
-					uart_ao_b_8_9_pins: uart-ao-b-8-9 {
-						mux {
-							groups = "uart_ao_b_tx_8",
-								 "uart_ao_b_rx_9";
-							function = "uart_ao_b";
-							bias-disable;
-						};
+				uart_ao_b_8_9_pins: uart-ao-b-8-9 {
+					mux {
+						groups = "uart_ao_b_tx_8",
+							 "uart_ao_b_rx_9";
+						function = "uart_ao_b";
+						bias-pull-up;
 					};
+				};
 
-					uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
-						mux {
-							groups = "uart_ao_b_cts",
-								 "uart_ao_b_rts";
-							function = "uart_ao_b";
-							bias-disable;
-						};
+				uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
+					mux {
+						groups = "uart_ao_b_cts",
+							 "uart_ao_b_rts";
+						function = "uart_ao_b";
+						bias-disable;
 					};
+				};
 
-					pwm_a_e_pins: pwm-a-e {
-						mux {
-							groups = "pwm_a_e";
-							function = "pwm_a_e";
-							bias-disable;
-						};
+				pwm_a_e_pins: pwm-a-e {
+					mux {
+						groups = "pwm_a_e";
+						function = "pwm_a_e";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_a_pins: pwm-ao-a {
-						mux {
-							groups = "pwm_ao_a";
-							function = "pwm_ao_a";
-							bias-disable;
-						};
+				pwm_ao_a_pins: pwm-ao-a {
+					mux {
+						groups = "pwm_ao_a";
+						function = "pwm_ao_a";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_b_pins: pwm-ao-b {
-						mux {
-							groups = "pwm_ao_b";
-							function = "pwm_ao_b";
-							bias-disable;
-						};
+				pwm_ao_b_pins: pwm-ao-b {
+					mux {
+						groups = "pwm_ao_b";
+						function = "pwm_ao_b";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_c_4_pins: pwm-ao-c-4 {
-						mux {
-							groups = "pwm_ao_c_4";
-							function = "pwm_ao_c";
-							bias-disable;
-						};
+				pwm_ao_c_4_pins: pwm-ao-c-4 {
+					mux {
+						groups = "pwm_ao_c_4";
+						function = "pwm_ao_c";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_c_6_pins: pwm-ao-c-6 {
-						mux {
-							groups = "pwm_ao_c_6";
-							function = "pwm_ao_c";
-							bias-disable;
-						};
+				pwm_ao_c_6_pins: pwm-ao-c-6 {
+					mux {
+						groups = "pwm_ao_c_6";
+						function = "pwm_ao_c";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_d_5_pins: pwm-ao-d-5 {
-						mux {
-							groups = "pwm_ao_d_5";
-							function = "pwm_ao_d";
-							bias-disable;
-						};
+				pwm_ao_d_5_pins: pwm-ao-d-5 {
+					mux {
+						groups = "pwm_ao_d_5";
+						function = "pwm_ao_d";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_d_10_pins: pwm-ao-d-10 {
-						mux {
-							groups = "pwm_ao_d_10";
-							function = "pwm_ao_d";
-							bias-disable;
-						};
+				pwm_ao_d_10_pins: pwm-ao-d-10 {
+					mux {
+						groups = "pwm_ao_d_10";
+						function = "pwm_ao_d";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_d_e_pins: pwm-ao-d-e {
-						mux {
-							groups = "pwm_ao_d_e";
-							function = "pwm_ao_d";
-						};
+				pwm_ao_d_e_pins: pwm-ao-d-e {
+					mux {
+						groups = "pwm_ao_d_e";
+						function = "pwm_ao_d";
 					};
+				};
 
-					remote_input_ao_pins: remote-input-ao {
-						mux {
-							groups = "remote_ao_input";
-							function = "remote_ao_input";
-							bias-disable;
-						};
+				remote_input_ao_pins: remote-input-ao {
+					mux {
+						groups = "remote_ao_input";
+						function = "remote_ao_input";
+						bias-disable;
 					};
 				};
 			};
@@ -2039,8 +2060,11 @@
 			};
 
 			pwm_AO_cd: pwm@2000 {
-				compatible = "amlogic,meson-g12a-ao-pwm-cd";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x2000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -2078,8 +2102,13 @@
 			};
 
 			pwm_AO_ab: pwm@7000 {
-				compatible = "amlogic,meson-g12a-ao-pwm-ab";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x7000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV5>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -2152,6 +2181,15 @@
 					remote-endpoint = <&hdmi_tx_in>;
 				};
 			};
+
+			/* DPI output port */
+			dpi_port: port@2 {
+				reg = <2>;
+
+				dpi_out: endpoint {
+					remote-endpoint = <&mipi_dsi_in>;
+				};
+			};
 		};
 
 		gic: interrupt-controller@ffc01000 {
@@ -2189,6 +2227,48 @@
 				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
 			};
 
+			mipi_dsi: dsi@7000 {
+				compatible = "amlogic,meson-g12a-dw-mipi-dsi";
+				reg = <0x0 0x7000 0x0 0x1000>;
+				resets = <&reset RESET_MIPI_DSI_HOST>;
+				reset-names = "top";
+				clocks = <&clkc CLKID_MIPI_DSI_HOST>,
+					 <&clkc CLKID_MIPI_DSI_PXCLK>,
+					 <&clkc CLKID_CTS_ENCL>;
+				clock-names = "pclk", "bit", "px";
+				phys = <&mipi_dphy>;
+				phy-names = "dphy";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+
+				assigned-clocks = <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+					 <&clkc CLKID_CTS_ENCL_SEL>,
+					 <&clkc CLKID_VCLK2_SEL>;
+				assigned-clock-parents = <&clkc CLKID_GP0_PLL>,
+					 <&clkc CLKID_VCLK2_DIV1>,
+					 <&clkc CLKID_GP0_PLL>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* VPU VENC Input */
+					mipi_dsi_venc_port: port@0 {
+						reg = <0>;
+
+						mipi_dsi_in: endpoint {
+							remote-endpoint = <&dpi_out>;
+						};
+					};
+
+					/* DSI Output */
+					mipi_dsi_panel_port: port@1 {
+						reg = <1>;
+					};
+				};
+			};
+
 			watchdog: watchdog@f0d0 {
 				compatible = "amlogic,meson-gxbb-wdt";
 				reg = <0x0 0xf0d0 0x0 0x10>;
@@ -2229,22 +2309,37 @@
 			};
 
 			pwm_ef: pwm@19000 {
-				compatible = "amlogic,meson-g12a-ee-pwm";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x19000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_cd: pwm@1a000 {
-				compatible = "amlogic,meson-g12a-ee-pwm";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1a000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_ab: pwm@1b000 {
-				compatible = "amlogic,meson-g12a-ee-pwm";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1b000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -2502,6 +2597,9 @@
 		clocks = <&clkc CLKID_NNA_CORE_CLK>,
 			 <&clkc CLKID_NNA_AXI_CLK>;
 		clock-names = "core", "bus";
+		assigned-clocks = <&clkc CLKID_NNA_CORE_CLK>,
+				  <&clkc CLKID_NNA_AXI_CLK>;
+		assigned-clock-rates = <800000000>, <800000000>;
 		resets = <&reset RESET_NNA>;
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index e732df3f3114..664912d1beaa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -363,6 +363,10 @@
 	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
 };
 
+&hdmi_tx {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
 &vpu {
 	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
new file mode 100644
index 000000000000..9591fdc31ee0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+&uart_A {
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddao_3v3>;
+		vddio-supply = <&vddio_ao1v8>;
+	};
+};
+
+&sd_emmc_a {
+	/* Per mmc-controller.yaml */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* NB: may be either AP6398S or AP6398SR3 wifi module */
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
new file mode 100644
index 000000000000..55fff35b09ae
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+&uart_A {
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&sd_emmc_a {
+	/* No explicit compatible for rtl8822cs sdio */
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
new file mode 100644
index 000000000000..d0a3b4b9229c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/*
+ * SEI codename: SEI530FB (based on SEI510)
+ * Freebox codename: fbx8am
+ * Commercial names: Freebox Pop, Player TV Free 4K
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "freebox,fbx8am", "amlogic,g12a";
+	model = "Freebox Player Pop";
+	chassis-type = "embedded";
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		/* Physical user-accessible reset button near USB port */
+		power-button {
+			label = "Reset";
+			linux,code = <BTN_MISC>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	spdif_dit: audio-codec-2 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddao_3v3_t: regulator-vddao-3v3-t {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3_T";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&ao_5v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <10>; /* required for 43752 */
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "fbx8am";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout_a>;
+
+			codec-0 {
+			sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&spdifout_a {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
+		    <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
+		    <&pdm_dclk_z_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
index fcd7e1d8e16f..4353485c6f26 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
@@ -60,7 +60,7 @@
 		clock-names = "ext_clock";
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -68,7 +68,7 @@
 		regulator-always-on;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -77,7 +77,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -86,7 +86,7 @@
 		regulator-always-on;
 	};
 
-	hdmi_pw: regulator-hdmi_pw {
+	hdmi_pw: regulator-hdmi-pw {
 		compatible = "regulator-fixed";
 		regulator-name = "HDMI_PW";
 		regulator-min-microvolt = <5000000>;
@@ -95,7 +95,7 @@
 		regulator-always-on;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -104,7 +104,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -138,6 +138,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -216,28 +220,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -280,8 +280,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -289,8 +287,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 0ad0c2b7dfef..f39fcabc763f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -15,7 +15,7 @@
 	compatible = "seirobotics,sei510", "amlogic,g12a";
 	model = "SEI Robotics SEI510";
 
-	adc_keys {
+	keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
 		io-channel-names = "buttons";
@@ -45,7 +45,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
@@ -84,7 +83,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -93,7 +92,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -101,7 +100,7 @@
 		regulator-always-on;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -110,7 +109,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -119,7 +118,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3_t: regultor-vddao_3v3_t {
+	vddao_3v3_t: regulator-vddao-3v3-t {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3_T";
 		regulator-min-microvolt = <3300000>;
@@ -148,7 +147,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao1v8: regulator-vddio_ao1v8 {
+	vddio_ao1v8: regulator-vddio-ao1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
@@ -202,6 +201,10 @@
 				"TODDR_B IN 1", "TDMIN_B OUT",
 				"TODDR_C IN 1", "TDMIN_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -311,28 +314,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -386,8 +385,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -395,8 +392,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pdm {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 8355ddd7e9ae..b5bf8ecc91e6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -24,7 +24,6 @@
 		compatible = "simple-audio-amplifier";
 		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 		VCC-supply = <&vcc_5v>;
-		#sound-dai-cells = <0>;
 		sound-name-prefix = "10U2";
 	};
 
@@ -75,7 +74,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -84,7 +83,7 @@
 		regulator-always-on;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -92,7 +91,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr_en: regulator-usb_pwr_en {
+	usb_pwr_en: regulator-usb-pwr-en {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR_EN";
 		regulator-min-microvolt = <5000000>;
@@ -103,7 +102,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -112,7 +111,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -122,7 +121,7 @@
 		/* FIXME: actually controlled by VDDCPU_B_EN */
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -133,7 +132,7 @@
 		enable-active-high;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -142,7 +141,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -239,6 +238,10 @@
 				"Lineout", "10U2 OUTL",
 				"Lineout", "10U2 OUTR";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -374,6 +377,7 @@
 };
 
 &acodec {
+	AVDD-supply = <&vddao_1v8>;
 	status = "okay";
 };
 
@@ -403,28 +407,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &clkc_audio {
@@ -498,8 +498,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 4969a76460fa..5ab460a3e637 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -22,7 +22,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -67,7 +66,7 @@
 		clock-names = "ext_clock";
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -76,7 +75,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -84,7 +83,7 @@
 		regulator-always-on;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -93,7 +92,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -103,7 +102,7 @@
 		/* FIXME: actually controlled by VDDCPU_B_EN */
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -113,7 +112,7 @@
 		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -122,7 +121,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -159,6 +158,10 @@
 				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -260,28 +263,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -325,8 +324,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -360,8 +357,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &uart_A {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 543e70669df5..1321ad95923d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -17,6 +17,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -26,6 +32,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -35,6 +47,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -44,6 +62,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -52,6 +76,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -62,6 +89,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
index 124a80901084..9fd68195be3f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
@@ -39,3 +39,7 @@
 	phy-names = "usb2-phy0", "usb2-phy1";
 };
  */
+
+&npu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
index 65b963d794cd..82546b738977 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
@@ -76,46 +76,42 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>, <&pwm_b_x7_pins>;
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
+};
+
+&npu {
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
index 8e9ad1e51d66..8ecb5bd125c1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -14,6 +14,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <761000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -54,6 +55,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
index 13d478f9c891..2d74456e685d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
@@ -70,6 +70,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
new file mode 100644
index 000000000000..0f48c32bec97
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ * Copyright 2023 MNT Research GmbH
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-bananapi-cm4.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	model = "MNT Reform 2 with BPI-CM4 Module";
+	compatible = "mntre,reform2-cm4", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b";
+	chassis-type = "laptop";
+
+	aliases {
+		ethernet0 = &ethmac;
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+	};
+
+	hdmi_connector: hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "MNT-REFORM2-BPI-CM4";
+		audio-widgets = "Headphone", "Headphone Jack",
+				"Speaker", "External Speaker",
+				"Microphone", "Mic Jack";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmin_b>;
+		audio-routing =	"TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"External Speaker", "SPK_LP",
+				"External Speaker", "SPK_LN",
+				"External Speaker", "SPK_RP",
+				"External Speaker", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+					<&clkc CLKID_MPLL0>,
+					<&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* Analog Audio */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&wm8960>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-8 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	reg_main_1v8: regulator-main-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_main_3v3>;
+	};
+
+	reg_main_1v2: regulator-main-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&reg_main_5v>;
+	};
+
+	reg_main_3v3: regulator-main-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_main_5v: regulator-main-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_main_usb: regulator-main-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_main_5v>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm_AO_ab 0 10000 0>;
+		power-supply = <&reg_main_usb>;
+		enable-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 32 64 128 160 200 255>;
+		default-brightness-level = <6>;
+	};
+
+	panel {
+		compatible = "innolux,n125hce-gn1";
+		power-supply = <&reg_main_3v3>;
+		backlight = <&backlight>;
+		no-hpd;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&edp_bridge_out>;
+			};
+		};
+	};
+
+	clock_12288: clock_12288 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+};
+
+&mipi_analog_dphy {
+	status = "okay";
+};
+
+&mipi_dphy {
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK>,
+			  <&clkc CLKID_CTS_ENCL_SEL>,
+			  <&clkc CLKID_VCLK2_SEL>;
+	assigned-clock-parents = <0>,
+				 <&clkc CLKID_GP0_PLL>,
+				 <0>,
+				 <&clkc CLKID_VCLK2_DIV1>,
+				 <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <936000000>,
+			       <0>,
+			       <936000000>,
+			       <0>,
+			       <0>;
+};
+
+&mipi_dsi_panel_port {
+	mipi_dsi_out: endpoint {
+		remote-endpoint = <&edp_bridge_in>;
+	};
+};
+
+&cecb_AO {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&pwm_AO_ab {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_ao_a_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	edp_bridge: bridge@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		enable-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_HIGH>; // PIN_24 / GPIO8
+		vccio-supply = <&reg_main_1v8>;
+		vpll-supply = <&reg_main_1v8>;
+		vcca-supply = <&reg_main_1v2>;
+		vcc-supply = <&reg_main_1v2>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				edp_bridge_in: endpoint {
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				edp_bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clock_12288>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		wlf,shared-lrclk;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&sd_emmc_b {
+	status = "okay";
+};
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmif_b {
+	pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
+	pinctrl-names = "default";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
index 995ce10d5c81..39011b645128 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -155,42 +155,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
@@ -257,8 +251,6 @@
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 
 	status = "okay";
 };
@@ -273,8 +265,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 
 	status = "okay";
 };
@@ -369,7 +359,7 @@
 
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
index 0a6a12808568..1b08303c4282 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -44,13 +44,6 @@
 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
 	};
 
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		#cooling-cells = <2>;
-		cooling-levels = <0 120 170 220>;
-		pwms = <&pwm_cd 1 40000 0>;
-	};
-
 	hdmi-connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -201,6 +194,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -266,42 +263,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
@@ -370,15 +361,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
-};
-
-&pwm_cd {
-	status = "okay";
-	pinctrl-0 = <&pwm_d_x6_pins>;
-	pinctrl-names = "default";
-	pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>;
 };
 
 &pwm_ef {
@@ -390,8 +372,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -487,7 +467,7 @@
 
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts
new file mode 100644
index 000000000000..ecfa1c683dde
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-dreambox.dtsi"
+
+/ {
+	compatible = "dream,dreambox-one", "amlogic,s922x", "amlogic,g12b";
+	model = "Dreambox One";
+};
+
+&sd_emmc_a {
+	sd-uhs-sdr12;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts
new file mode 100644
index 000000000000..df0d71983c3d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-dreambox.dtsi"
+
+/ {
+	compatible = "dream,dreambox-two", "amlogic,s922x", "amlogic,g12b";
+	model = "Dreambox Two";
+};
+
+&sd_emmc_a {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
new file mode 100644
index 000000000000..8e3e3354ed67
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	cvbs-connector {
+		status = "disabled";
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOA_11 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	spdif_dit: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "DREAMBOX";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout_a>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-dreambox";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+&spdifout_a {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
index bb73e10b5e74..369c5cf889b6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
@@ -48,6 +48,10 @@
 				"TDMOUT_A IN 2", "FRDDR_C OUT 1",
 				"TDM_A Playback", "TDMOUT_A OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
index 6eeedd54ab91..654449afd3a4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
@@ -49,6 +49,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
index 8fc2e143cb54..e20311386745 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
@@ -22,7 +22,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -38,6 +37,10 @@
 				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index 16dd409051b4..fc737499f207 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -51,57 +51,47 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
index eed2a23047ca..d5938a4a6da3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
@@ -234,6 +234,10 @@
 				"Internal Speakers", "Speaker Amplifier OUTL",
 				"Internal Speakers", "Speaker Amplifier OUTR";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -277,42 +281,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 /* RK817 only supports 12.5mV steps, round up the values */
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 91c9769fda20..3bca8023638d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -19,7 +19,7 @@
 		status = "okay";
 	};
 
-	hub_5v: regulator-hub_5v {
+	hub_5v: regulator-hub-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "HUB_5V";
 		regulator-min-microvolt = <5000000>;
@@ -31,6 +31,30 @@
 		enable-active-high;
 	};
 
+	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
+	usb-hub {
+		dr_mode = "host";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 2.0 hub on port 1 */
+		hub_2_0: hub@1 {
+			compatible = "usb5e3,610";
+			reg = <1>;
+			peer-hub = <&hub_3_0>;
+			vdd-supply = <&usb_pwr_en>;
+		};
+
+		/* 3.0 hub on port 4 */
+		hub_3_0: hub@2 {
+			compatible = "usb5e3,620";
+			reg = <2>;
+			peer-hub = <&hub_2_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
+		};
+	};
+
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "ODROID-N2";
@@ -71,6 +95,10 @@
 				"Lineout", "U19 OUTL",
 				"Lineout", "U19 OUTR";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -234,18 +262,6 @@
 		"PIN_3",  /* GPIOX_17 */
 		"PIN_5",  /* GPIOX_18 */
 		"PIN_36"; /* GPIOX_19 */
-	/*
-	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub-hog {
-		gpio-hog;
-		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
 };
 
 &i2c3 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
index e26f3e3258e1..1b9097a30251 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
@@ -39,6 +39,10 @@
 				"TODDR_B IN 6", "TDMIN_LB OUT",
 				"TODDR_C IN 6", "TDMIN_LB OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
index 9e12a34b2840..3298d59833b6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
@@ -48,7 +48,7 @@
 		};
 	};
 
-	tflash_vdd: regulator-tflash_vdd {
+	tflash_vdd: regulator-tflash-vdd {
 		compatible = "regulator-fixed";
 
 		regulator-name = "TFLASH_VDD";
@@ -60,7 +60,7 @@
 		regulator-always-on;
 	};
 
-	tf_io: gpio-regulator-tf_io {
+	tf_io: gpio-regulator-tf-io {
 		compatible = "regulator-gpio";
 
 		regulator-name = "TF_IO";
@@ -74,7 +74,7 @@
 			 <1800000 1>;
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -83,7 +83,7 @@
 		regulator-always-on;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -91,7 +91,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr_en: regulator-usb_pwr_en {
+	usb_pwr_en: regulator-usb-pwr-en {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR_EN";
 		regulator-min-microvolt = <5000000>;
@@ -103,7 +103,7 @@
 		enable-active-high;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "5V";
 		regulator-min-microvolt = <5000000>;
@@ -114,7 +114,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -123,7 +123,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -171,7 +171,7 @@
 		regulator-always-on;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -180,7 +180,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -227,42 +227,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu_thermal {
@@ -327,16 +321,12 @@
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
index 890f5bfebb03..1e5c6f984945 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
@@ -33,6 +33,13 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 64 128 192 255>;
+		pwms = <&pwm_AO_ab 0 40000 0>;
+	};
+
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		poll-interval = <100>;
@@ -169,6 +176,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -248,42 +259,53 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <70000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_active>;
+			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
 };
 
 &frddr_a {
@@ -351,32 +373,24 @@
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_ef {
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_ab {
 	pinctrl-0 = <&pwm_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
index 44c23c984034..19cad93a6889 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -14,6 +14,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -59,6 +60,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <771000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index ce548b373296..4c1a75b926ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -17,7 +17,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -33,6 +32,10 @@
 				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index ac8b7178257e..9b6d780eada7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -39,7 +39,7 @@
 		clock-names = "ext_clock";
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -48,7 +48,7 @@
 		regulator-always-on;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -56,7 +56,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -67,7 +67,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -76,7 +76,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -213,42 +213,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -304,24 +298,18 @@
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
 &pwm_ef {
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index 86e6ceb31d5e..f04efa828256 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -49,7 +49,13 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <592>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -59,7 +65,13 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <592>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -69,7 +81,13 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -79,7 +97,13 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -89,7 +113,13 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 			#cooling-cells = <2>;
 		};
 
@@ -99,14 +129,32 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 			#cooling-cells = <2>;
 		};
 
-		l2: l2-cache0 {
+		l2_cache_l: l2-cache-cluster0 {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x40000>;  /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+
+		l2_cache_b: l2-cache-cluster1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>; /* L2. 1MB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index 5e7b9273b062..2da49cfbde77 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -84,7 +84,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -93,7 +93,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -120,7 +120,7 @@
 		};
 	};
 
-	vcc_card: regulator-vcc_card {
+	vcc_card: regulator-vcc-card {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_CARD";
 		regulator-min-microvolt = <3300000>;
@@ -141,7 +141,7 @@
 		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -150,7 +150,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao3v3: regulator-vddio_ao3v3 {
+	vddio_ao3v3: regulator-vddio-ao3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO3V3";
 		regulator-min-microvolt = <3300000>;
@@ -159,7 +159,7 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
@@ -194,6 +194,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"7J4-14 LEFT", "AU2 OUTL",
 				"7J4-11 RIGHT", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -341,24 +345,18 @@
 &pwm_AO_ab {
 	pinctrl-0 = <&pwm_ao_a_3_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_ab {
 	pinctrl-0 = <&pwm_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_ef {
 	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 18f7b730289e..b4f88ed6273b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -26,7 +26,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -51,28 +50,28 @@
 		regulator-always-on;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -98,7 +97,7 @@
 		clock-names = "ext_clock";
 	};
 
-	cvbs-connector {
+	cvbs_connector: cvbs-connector {
 		compatible = "composite-video-connector";
 
 		port {
@@ -130,6 +129,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -237,8 +240,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 2673f0dbafe7..c1d8e81d95cb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -95,6 +95,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -105,6 +111,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -115,6 +127,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -125,6 +143,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -134,6 +158,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -329,14 +356,14 @@
 			};
 
 			pwm_ab: pwm@8550 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x08550 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_cd: pwm@8650 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x08650 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
@@ -351,7 +378,7 @@
 			};
 
 			pwm_ef: pwm@86c0 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x086c0 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
@@ -498,7 +525,7 @@
 			};
 
 			pwm_AO_ab: pwm@550 {
-				compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x00550 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index e238f1f10124..073b47ce8c3c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -18,7 +18,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -46,6 +45,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "KII-PRO";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 1fd2e56e6b08..2ecc6ebd5a43 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -135,6 +135,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "NANOPI-K2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -294,8 +298,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 4aab1ab705b4..c09da40ff7b0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -78,21 +78,21 @@
 			 <3300000 1>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -142,6 +142,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "NEXBOX-A95X";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -237,8 +241,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index e6d2de7c45a9..12e26f99d4f0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -67,7 +67,7 @@
 		regulator-always-on;
 	};
 
-	hdmi_p5v0: regulator-hdmi_p5v0 {
+	hdmi_p5v0: regulator-hdmi-p5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "HDMI_P5V0";
 		regulator-min-microvolt = <5000000>;
@@ -76,7 +76,7 @@
 		vin-supply = <&p5v0>;
 	};
 
-	tflash_vdd: regulator-tflash_vdd {
+	tflash_vdd: regulator-tflash-vdd {
 		compatible = "regulator-fixed";
 
 		regulator-name = "TFLASH_VDD";
@@ -92,7 +92,7 @@
 		vin-supply = <&vddio_ao3v3>;
 	};
 
-	tf_io: gpio-regulator-tf_io {
+	tf_io: gpio-regulator-tf-io {
 		compatible = "regulator-gpio";
 
 		regulator-name = "TF_IO";
@@ -148,7 +148,7 @@
 		vin-supply = <&p5v0>;
 	};
 
-	ddr3_1v5: regulator-ddr3_1v5 {
+	ddr3_1v5: regulator-ddr3-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "DDR3_1V5";
 		regulator-min-microvolt = <1500000>;
@@ -177,6 +177,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "ODROID-C2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -344,10 +348,6 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-ddr50;
 	max-frequency = <100000000>;
 	disable-wp;
 
@@ -408,6 +408,6 @@
 		compatible = "usb5e3,610";
 		reg = <1>;
 		vdd-supply = <&p5v0>;
-		reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index 292c718ee19c..bfac00e76ba3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -18,18 +18,17 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
-	avdd18_usb_adc: regulator-avdd18_usb_adc {
+	avdd18_usb_adc: regulator-avdd18-usb-adc {
 		compatible = "regulator-fixed";
 		regulator-name = "AVDD18_USB_ADC";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	adc_keys {
+	keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
 		io-channel-names = "buttons";
@@ -69,6 +68,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "P200";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
index 6f81eed83bec..c10f66031ecd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
@@ -17,6 +17,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "P201";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index e803a466fe4e..6f67364fd63f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -53,21 +53,21 @@
 		regulator-settling-time-down-us = <150000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -150,8 +150,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
@@ -178,9 +176,8 @@
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index e8303089bff6..6ff567225fee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -21,7 +21,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -48,28 +47,28 @@
 		enable-active-high;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -109,6 +108,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "VEGA-S95";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -219,8 +222,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
index af9ea32a2876..ec281a9e9e77 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
@@ -16,6 +16,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "WETEK-HUB";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index e1b74b174915..924414861b72 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -17,7 +17,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -49,6 +48,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "WETEK-PLAY2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 94dafb955301..bfedfc1472ec 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -49,21 +49,21 @@
 		enable-active-high;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -71,7 +71,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -185,8 +185,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 12ef6e81c8bd..f69923da07fe 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -105,7 +105,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -122,7 +122,7 @@
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -311,10 +311,16 @@
 		 <&reset RESET_HDMI_SYSTEM_RESET>,
 		 <&reset RESET_HDMI_TX>;
 	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
+	clocks = <&clkc CLKID_HDMI>,
+		 <&clkc CLKID_HDMI_PCLK>,
 		 <&clkc CLKID_GCLK_VENCI_INT0>;
 	clock-names = "isfr", "iahb", "venci";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+
+	assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+			  <&clkc CLKID_HDMI>;
+	assigned-clock-parents = <&xtal>, <0>;
+	assigned-clock-rates = <0>, <24000000>;
 };
 
 &sysctrl {
@@ -514,7 +520,7 @@
 				groups = "uart_tx_a",
 				       "uart_rx_a";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -532,7 +538,7 @@
 				groups = "uart_tx_b",
 				       "uart_rx_b";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -550,7 +556,7 @@
 				groups = "uart_tx_c",
 				       "uart_rx_c";
 				function = "uart_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -733,6 +739,31 @@
 	};
 };
 
+&pwm_ab {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_AO_ab {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+};
+
+&pwm_cd {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_ef {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
 &pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
index a29b49f051ae..c6132fb71dfc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
@@ -42,7 +42,7 @@
 		};
 	};
 
-	dc_5v: regulator-dc_5v {
+	dc_5v: regulator-dc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -89,7 +89,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -98,7 +98,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -107,7 +107,7 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
@@ -123,6 +123,10 @@
 				"Speaker", "9J5-2 RIGHT";
 		audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
 				"9J5-2 RIGHT", "ACODEC LORN";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
index c0d6eb55100a..ca7c4e8e7cac 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -64,28 +64,28 @@
 		reg = <0x0 0x0 0x0 0x20000000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -128,6 +128,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -276,8 +280,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* This is connected to the Bluetooth module: */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts
new file mode 100644
index 000000000000..cac15b89c573
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Ferass El Hafidi <funderscore@postmarketos.org>
+ * Heavily based on meson-gxl-s805x-p241.dtb:
+ *  - Copyright (c) 2018 BayLibre, SAS.
+ *    Author: Neil Armstrong <narmstrong@baylibre.com>
+ *    Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s805y.dtsi"
+
+/ {
+	compatible = "xiaomi,aquaman", "amlogic,s805y", "amlogic,meson-gxl";
+	model = "Xiaomi Mi TV Stick (aquaman)";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	vddio_boot: regulator-vddio-boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio-ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "XIAOMI-AQUAMAN";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module (Amlogic W155S1 / Realtek RTL8821CS) */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	sdio: wifi@1 {
+		reg = <1>;
+	};
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+/*
+ * This is connected to the Bluetooth module
+ * Note: There's no driver for the Bluetooth module of some variants yet.
+ */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+	vbus-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi
new file mode 100644
index 000000000000..49b29b71f732
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Ferass El Hafidi <funderscore@postmarketos.org>
+ */
+
+#include "meson-gxl-s805x.dtsi"
+
+/ {
+	compatible = "amlogic,s805y", "amlogic,meson-gxl";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index c1470416faad..7dffeb5931c9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -102,8 +102,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
index 92c425d0259c..ff9145d49090 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
@@ -21,8 +21,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index a18d6d241a5a..4ca90ac947b7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -37,28 +37,28 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -116,8 +116,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
index c8d74e61dec1..62a2da766a00 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -42,21 +42,21 @@
 			 <3300000 1>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -115,8 +115,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* SD card */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index fea65f20523a..4e89d6f6bb57 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -67,6 +67,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "KHADAS-VIM";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -207,8 +211,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal> , <&xtal>;
-	clock-names = "clkin0", "clkin1" ;
 };
 
 &pwm_ef {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
index 2825db91e462..6cbdfde00e12 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
@@ -67,7 +67,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -76,7 +76,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -93,7 +93,7 @@
 		regulator-always-on;
 	};
 
-	vcc_card: regulator-vcc_card {
+	vcc_card: regulator-vcc-card {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_CARD";
 		regulator-min-microvolt = <3300000>;
@@ -114,7 +114,7 @@
 		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
 	};
 
-	vddio_ao3v3: regulator-vddio_ao3v3 {
+	vddio_ao3v3: regulator-vddio-ao3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO3V3";
 		regulator-min-microvolt = <3300000>;
@@ -139,7 +139,7 @@
 		regulator-settling-time-down-us = <50000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -148,7 +148,7 @@
 		regulator-always-on;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC 1V8";
 		regulator-min-microvolt = <1800000>;
@@ -160,6 +160,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "LIBRETECH-CC-V2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 27093e6ac9e2..401064b0428d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -93,7 +93,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -117,7 +117,7 @@
 		regulator-settling-time-down-us = <50000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -125,7 +125,7 @@
 	};
 
 	/* This is provided by LDOs on the eMMC daugther card */
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
@@ -142,6 +142,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index f1acca5c4434..236cedec9f19 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -42,21 +42,21 @@
 			 <3300000 1>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -145,8 +145,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 9b4ea6a49398..8b41e340f919 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -50,6 +50,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index a150cc0e18ff..05a0d4de3ad7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -39,28 +39,28 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -101,8 +101,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
@@ -134,9 +132,8 @@
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts
new file mode 100644
index 000000000000..a9c5881c9783
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x-p212.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "osmc,vero4k", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "OSMC Vero 4K";
+
+	reserved-memory {
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-standby {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			panic-indicator;
+		};
+	};
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&hdmi_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		sound-name-prefix = "DIT";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "VERO4K";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLP",
+				"AU2 INR", "ACODEC LORP",
+				"AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-5 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 17bcfa4702e1..ba535010a3c9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -163,7 +163,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -180,7 +180,7 @@
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -188,7 +188,7 @@
 			mux {
 				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -214,7 +214,7 @@
 				groups = "i2c_sck_ao",
 				       "i2c_sda_ao";
 				function = "i2c_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -323,10 +323,16 @@
 		 <&reset RESET_HDMI_SYSTEM_RESET>,
 		 <&reset RESET_HDMI_TX>;
 	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
+	clocks = <&clkc CLKID_HDMI>,
+		 <&clkc CLKID_HDMI_PCLK>,
 		 <&clkc CLKID_GCLK_VENCI_INT0>;
 	clock-names = "isfr", "iahb", "venci";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+
+	assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+			  <&clkc CLKID_HDMI>;
+	assigned-clock-parents = <&xtal>, <0>;
+	assigned-clock-rates = <0>, <24000000>;
 };
 
 &sysctrl {
@@ -516,7 +522,7 @@
 				groups = "uart_tx_a",
 				       "uart_rx_a";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -534,7 +540,7 @@
 				groups = "uart_tx_b",
 				       "uart_rx_b";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -552,7 +558,7 @@
 				groups = "uart_tx_c",
 				       "uart_rx_c";
 				function = "uart_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -570,7 +576,7 @@
 				groups = "i2c_sck_a",
 				     "i2c_sda_a";
 				function = "i2c_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -579,7 +585,7 @@
 				groups = "i2c_sck_b",
 				      "i2c_sda_b";
 				function = "i2c_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -588,7 +594,7 @@
 				groups = "i2c_sck_c",
 				      "i2c_sda_c";
 				function = "i2c_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -597,7 +603,7 @@
 				groups = "i2c_sck_c_dv19",
 				      "i2c_sda_c_dv18";
 				function = "i2c_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -803,6 +809,31 @@
 	};
 };
 
+&pwm_ab {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_AO_ab {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+};
+
+&pwm_cd {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_ef {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
 &pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
new file mode 100644
index 000000000000..1221f4545130
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,p271", "amlogic,s905l", "amlogic,meson-gxlx";
+	model = "Amlogic Meson GXLX (S905L) P271 Development Board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	sound {
+		model = "P271";
+	};
+};
+
+&apb {
+	mali: gpu@c0000 {
+		/* Mali 450-MP2 */
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1";
+	};
+};
+
+&saradc {
+	compatible = "amlogic,meson-gxlx-saradc", "amlogic,meson-saradc";
+};
+
+&usb {
+	dr_mode = "host";
+};
+
+&vdec {
+	compatible = "amlogic,gxlx-vdec", "amlogic,gx-vdec";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 860f307494c5..2a09b3d550e2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -112,28 +112,28 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -150,6 +150,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "KHADAS-VIM2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -285,16 +289,12 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &pwm_ef {
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &sd_emmc_a {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 7d525bdb0e06..773107cc47dd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -28,7 +28,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -87,6 +86,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "NEXBOX-A1";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
index d4858afa0e9c..feb31207773f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
@@ -72,8 +72,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
index d02b80d77378..6c8bec1853ac 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
@@ -21,8 +21,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 50d49aec41bd..9d5a481b309f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -37,7 +37,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -102,6 +101,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "RBOX-PRO";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -189,8 +192,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
@@ -216,7 +217,7 @@
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: brcmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
index 4eda9f634c42..a66f19851ac9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
@@ -14,7 +14,7 @@
 		     "amlogic,meson-gxm";
 	model = "Libre Computer AML-S912-PC";
 
-	typec2_vbus: regulator-typec2_vbus {
+	typec2_vbus: regulator-typec2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "TYPEC2_VBUS";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts
new file mode 100644
index 000000000000..ba871f3f53bb
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ *
+ * Debug UART (3.3V, 115200 baud) at the corner of the board:
+ *   (4) (3) (2) [1]
+ *   Vcc RXD TXD GND
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "ugoos,am3", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Ugoos AM3";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+};
+
+&cvbs_connector {
+	/* Not used on this board */
+	status = "disabled";
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_b_pins>;
+
+	rtc: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+/* WLAN: Atheros 10k (QCA9377) */
+&sd_emmc_a {
+	max-frequency = <200000000>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	max-frequency = <100000000>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index 411cc312fc62..514c9bea6423 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -64,6 +64,12 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -75,6 +81,12 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -86,6 +98,12 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -97,6 +115,12 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso
new file mode 100644
index 000000000000..a41b4e619580
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Enable Khadas TS050 DSI Panel + Touch Controller
+ * on Khadas VIM3 (A311D) and VIM3L (S905D3)
+ */
+
+&{/} {
+	panel_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm_AO_cd 0 25000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <200>;
+	};
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touch-controller@38 {
+		compatible = "edt,edt-ft5206";
+		reg = <0x38>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <IRQID_GPIOA_5 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio_expander 6 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+		status = "okay";
+	};
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK>,
+			  <&clkc CLKID_CTS_ENCL_SEL>,
+			  <&clkc CLKID_VCLK2_SEL>;
+	assigned-clock-parents = <0>,
+				 <&clkc CLKID_GP0_PLL>,
+				 <0>,
+				 <&clkc CLKID_VCLK2_DIV1>,
+				 <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <960000000>,
+			       <0>,
+			       <960000000>,
+			       <0>,
+			       <0>;
+
+	panel@0 {
+		compatible = "khadas,ts050";
+		reset-gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vcc_3v3>;
+		backlight = <&panel_backlight>;
+		reg = <0>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+};
+
+&mipi_analog_dphy {
+	status = "okay";
+};
+
+&mipi_dphy {
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_c_6_pins>, <&pwm_ao_d_e_pins>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 514a6dd4b124..7daa9b122d5c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -80,7 +80,7 @@
 		clock-names = "ext_clock";
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -88,7 +88,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -99,7 +99,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -108,7 +108,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -118,7 +118,7 @@
 		/* FIXME: actually controlled by VDDCPU_B_EN */
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
@@ -127,7 +127,7 @@
 		regulator-always-on;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_AO1V8";
 		regulator-min-microvolt = <1800000>;
@@ -136,7 +136,7 @@
 		regulator-always-on;
 	};
 
-	vsys_3v3: regulator-vsys_3v3 {
+	vsys_3v3: regulator-vsys-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VSYS_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -145,7 +145,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr: regulator-usb_pwr {
+	usb_pwr: regulator-usb-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR";
 		regulator-min-microvolt = <5000000>;
@@ -182,6 +182,10 @@
 				"TODDR_B IN 0", "TDMIN_A OUT",
 				"TODDR_C IN 0", "TDMIN_A OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
index 35e8f5bae990..ac9c4c2673b1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
@@ -150,7 +150,7 @@
 		gpio-open-drain;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -171,7 +171,7 @@
 		pwm-dutycycle-range = <100 0>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -180,7 +180,7 @@
 		vin-supply = <&vddao_3v3>;
 	};
 
-	vddio_c: regulator-vddio_c {
+	vddio_c: regulator-vddio-c {
 		compatible = "regulator-gpio";
 		regulator-name = "VDDIO_C";
 		regulator-min-microvolt = <1800000>;
@@ -200,6 +200,10 @@
 				 <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
 				 <&dioo2133>;
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -454,24 +458,18 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 };
 
 &pwm_ab {
 	status = "okay";
 	pinctrl-0 = <&pwm_b_x7_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 };
 
 &pwm_cd {
 	status = "okay";
 	pinctrl-0 = <&pwm_d_x3_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
index c1f322c73982..6730c44642d2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -15,7 +15,7 @@
 	#size-cells = <2>;
 
 	aliases {
-		serial0 = &uart_B;
+		serial0 = &uart_b;
 	};
 
 	memory@0 {
@@ -23,9 +23,125 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 52 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x3400000>;
+			no-map;
+		};
+	};
+
+	sdio_32k: sdio-32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&sdio_32k>;
+		clock-names = "ext_clock";
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+	       compatible = "regulator-fixed";
+	       regulator-name = "VDDIO_AO1V8";
+	       regulator-min-microvolt = <1800000>;
+	       regulator-max-microvolt = <1800000>;
+	       vin-supply = <&vddao_3v3>;
+	       regulator-always-on;
+	};
+
+	/* SY8120B1ABC DC/DC Regulator. */
+	vddcpu: regulator-vddcpu {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <689000>;
+		regulator-max-microvolt = <1049000>;
+
+		vin-supply = <&main_12v>;
+
+		pwms = <&pwm_ij 1 1500 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+		/* Voltage Duty-Cycle */
+		voltage-table = <1049000 0>,
+				<1039000 3>,
+				<1029000 6>,
+				<1019000 9>,
+				<1009000 12>,
+				<999000 14>,
+				<989000 17>,
+				<979000 20>,
+				<969000 23>,
+				<959000 26>,
+				<949000 29>,
+				<939000 31>,
+				<929000 34>,
+				<919000 37>,
+				<909000 40>,
+				<899000 43>,
+				<889000 45>,
+				<879000 48>,
+				<869000 51>,
+				<859000 54>,
+				<849000 56>,
+				<839000 59>,
+				<829000 62>,
+				<819000 65>,
+				<809000 68>,
+				<799000 70>,
+				<789000 73>,
+				<779000 76>,
+				<769000 79>,
+				<759000 81>,
+				<749000 84>,
+				<739000 87>,
+				<729000 89>,
+				<719000 92>,
+				<709000 95>,
+				<699000 98>,
+				<689000 100>;
+	};
 };
 
-&uart_B {
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins1>;
+	pinctrl-names = "default";
+};
+
+&pwm_ij {
+	status = "okay";
+};
+
+&uart_b {
 	status = "okay";
 };
 
@@ -34,3 +150,88 @@
 	pinctrl-0 = <&remote_pins>;
 	pinctrl-names = "default";
 };
+
+&sdio {
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	no-sd;
+	no-mmc;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+&sd {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
+};
+
+&spicc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spicc0_pins_x>;
+	cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index e0cfc54ebccb..9d99ed2994df 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -6,6 +6,11 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-s4-gpio.h>
+#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
+#include <dt-bindings/power/meson-s4-power.h>
+#include <dt-bindings/reset/amlogic,meson-s4-reset.h>
 
 / {
 	cpus {
@@ -61,10 +66,15 @@
 		#clock-cells = <0>;
 	};
 
-	pwrc: power-controller {
-		compatible = "amlogic,meson-s4-pwrc";
-		#power-domain-cells = <1>;
-		status = "okay";
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+
+			pwrc: power-controller {
+				compatible = "amlogic,meson-s4-pwrc";
+				#power-domain-cells = <1>;
+			};
+		};
 	};
 
 	soc {
@@ -92,6 +102,44 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			clkc_periphs: clock-controller@0 {
+				compatible = "amlogic,s4-peripherals-clkc";
+				reg = <0x0 0x0 0x0 0x49c>;
+				clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+					<&clkc_pll CLKID_FCLK_DIV2P5>,
+					<&clkc_pll CLKID_FCLK_DIV3>,
+					<&clkc_pll CLKID_FCLK_DIV4>,
+					<&clkc_pll CLKID_FCLK_DIV5>,
+					<&clkc_pll CLKID_FCLK_DIV7>,
+					<&clkc_pll CLKID_HIFI_PLL>,
+					<&clkc_pll CLKID_GP0_PLL>,
+					<&clkc_pll CLKID_MPLL0>,
+					<&clkc_pll CLKID_MPLL1>,
+					<&clkc_pll CLKID_MPLL2>,
+					<&clkc_pll CLKID_MPLL3>,
+					<&clkc_pll CLKID_HDMI_PLL>,
+					<&xtal>;
+				clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3",
+						"fclk_div4", "fclk_div5", "fclk_div7",
+						"hifi_pll", "gp0_pll", "mpll0", "mpll1",
+						"mpll2", "mpll3", "hdmi_pll", "xtal";
+				#clock-cells = <1>;
+			};
+
+			clkc_pll: clock-controller@8000 {
+				compatible = "amlogic,s4-pll-clkc";
+				reg = <0x0 0x8000 0x0 0x1e8>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				#clock-cells = <1>;
+			};
+
+			watchdog@2100 {
+				compatible = "amlogic,s4-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			periphs_pinctrl: pinctrl@4000 {
 				compatible = "amlogic,meson-s4-periphs-pinctrl";
 				#address-cells = <2>;
@@ -114,6 +162,428 @@
 						bias-disable;
 					};
 				};
+
+				i2c0_pins1: i2c0-pins1 {
+					mux {
+						groups = "i2c0_sda",
+						       "i2c0_scl";
+						function = "i2c0";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins1: i2c1-pins1 {
+					mux {
+						groups = "i2c1_sda_c",
+						       "i2c1_scl_c";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins2: i2c1-pins2 {
+					mux {
+						groups = "i2c1_sda_d",
+						       "i2c1_scl_d";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins3: i2c1-pins3 {
+					mux {
+						groups = "i2c1_sda_h",
+						       "i2c1_scl_h";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins4: i2c1-pins4 {
+					mux {
+						groups = "i2c1_sda_x",
+						       "i2c1_scl_x";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins1: i2c2-pins1 {
+					mux {
+						groups = "i2c2_sda_d",
+						       "i2c2_scl_d";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins2: i2c2-pins2 {
+					mux {
+						groups = "i2c2_sda_h8",
+						       "i2c2_scl_h9";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins3: i2c2-pins3 {
+					mux {
+						groups = "i2c2_sda_h0",
+						       "i2c2_scl_h1";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c3_pins1: i2c3-pins1 {
+					mux {
+						groups = "i2c3_sda_x",
+						       "i2c3_scl_x";
+						function = "i2c3";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c3_pins2: i2c3-pins2 {
+					mux {
+						groups = "i2c3_sda_z",
+						       "i2c3_scl_z";
+						function = "i2c3";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins1: i2c4-pins1 {
+					mux {
+						groups = "i2c4_sda_c",
+						       "i2c4_scl_c";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins2: i2c4-pins2 {
+					mux {
+						groups = "i2c4_sda_d",
+						       "i2c4_scl_d";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins3: i2c4-pins3 {
+					mux {
+						groups = "i2c4_sda_z",
+						       "i2c4_scl_z";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				nand_pins: nand-pins {
+					mux {
+						groups = "emmc_nand_d0",
+						       "emmc_nand_d1",
+						       "emmc_nand_d2",
+						       "emmc_nand_d3",
+						       "emmc_nand_d4",
+						       "emmc_nand_d5",
+						       "emmc_nand_d6",
+						       "emmc_nand_d7",
+						       "nand_ce0",
+						       "nand_ale",
+						       "nand_cle",
+						       "nand_wen_clk",
+						       "nand_ren_wr";
+						function = "nand";
+						input-enable;
+					};
+				};
+
+				pwm_a_pins1: pwm-a-pins1 {
+					mux {
+						groups = "pwm_a_d";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins2: pwm-a-pins2 {
+					mux {
+						groups = "pwm_a_x";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_b_pins1: pwm-b-pins1 {
+					mux {
+						groups = "pwm_b_d";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_pins2: pwm-b-pins2 {
+					mux {
+						groups = "pwm_b_x";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_c_pins1: pwm-c-pins1 {
+					mux {
+						groups = "pwm_c_d";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins2: pwm-c-pins2 {
+					mux {
+						groups = "pwm_c_x";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_d_pins1: pwm-d-pins1 {
+					mux {
+						groups = "pwm_d_d";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins2: pwm-d-pins2 {
+					mux {
+						groups = "pwm_d_h";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins1: pwm-e-pins1 {
+					mux {
+						groups = "pwm_e_x";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins2: pwm-e-pins2 {
+					mux {
+						groups = "pwm_e_z";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_pins1: pwm-f-pins1 {
+					mux {
+						groups = "pwm_f_x";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins2: pwm-f-pins2 {
+					mux {
+						groups = "pwm_f_z";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_g_pins1: pwm-g-pins1 {
+					mux {
+						groups = "pwm_g_d";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins2: pwm-g-pins2 {
+					mux {
+						groups = "pwm_g_z";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_h_pins: pwm-h-pins {
+					mux {
+						groups = "pwm_h";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_i_pins1: pwm-i-pins1 {
+					mux {
+						groups = "pwm_i_d";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins2: pwm-i-pins2 {
+					mux {
+						groups = "pwm_i_h";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_j_pins: pwm-j-pins {
+					mux {
+						groups = "pwm_j";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_a_hiz_pins: pwm-a-hiz-pins {
+					mux {
+						groups = "pwm_a_hiz";
+						function = "pwm_a_hiz";
+					};
+				};
+
+				pwm_b_hiz_pins: pwm-b-hiz-pins {
+					mux {
+						groups = "pwm_b_hiz";
+						function = "pwm_b_hiz";
+					};
+				};
+
+				pwm_c_hiz_pins: pwm-c-hiz-pins {
+					mux {
+						groups = "pwm_c_hiz";
+						function = "pwm_c_hiz";
+					};
+				};
+
+				pwm_g_hiz_pins: pwm-g-hiz-pins {
+					mux {
+						groups = "pwm_g_hiz";
+						function = "pwm_g_hiz";
+					};
+				};
+
+				sdcard_pins: sdcard-pins {
+					mux {
+						groups = "sdcard_d0_c",
+							 "sdcard_d1_c",
+							 "sdcard_d2_c",
+							 "sdcard_d3_c",
+							 "sdcard_clk_c",
+							 "sdcard_cmd_c";
+						function = "sdcard";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdcard_clk_gate_pins: sdcard-clk-gate-pins {
+					mux {
+						groups = "GPIOC_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_pins: emmc-pins {
+					mux-0 {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "emmc_cmd";
+						function = "emmc";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+					mux-1 {
+						groups = "emmc_clk";
+						function = "emmc";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_ds_pins: emmc-ds-pins {
+					mux {
+						groups = "emmc_nand_ds";
+						function = "emmc";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_clk_gate_pins: emmc-clk-gate-pins {
+					mux {
+						groups = "GPIOB_8";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_pins: sdio-pins {
+					mux {
+						groups = "sdio_d0",
+							 "sdio_d1",
+							 "sdio_d2",
+							 "sdio_d3",
+							 "sdio_clk",
+							 "sdio_cmd";
+						function = "sdio";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_clk_gate_pins: sdio-clk-gate-pins {
+					mux {
+						groups = "GPIOX_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				spicc0_pins_x: spicc0-pins_x {
+					mux {
+						groups = "spi_a_mosi_x",
+						       "spi_a_miso_x",
+						       "spi_a_clk_x";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins_h: spicc0-pins-h {
+					mux {
+						groups = "spi_a_mosi_h",
+						       "spi_a_miso_h",
+						       "spi_a_clk_h";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins_z: spicc0-pins-z {
+					mux {
+						groups = "spi_a_mosi_z",
+						       "spi_a_miso_z",
+						       "spi_a_clk_z";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
 			};
 
 			gpio_intc: interrupt-controller@4080 {
@@ -126,14 +596,170 @@
 					<10 11 12 13 14 15 16 17 18 19 20 21>;
 			};
 
-			uart_B: serial@7a000 {
+			eth_phy: mdio-multiplexer@28000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x28000 0x0 0xa4>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_ETHPHY>,
+					 <&xtal>,
+					 <&clkc_pll CLKID_MPLL_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+
+				ext_mdio: mdio@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet-phy@8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+
+			clk_msr: clock-measure@48000 {
+				compatible = "amlogic,s4-clk-measure";
+				reg = <0x0 0x48000 0x0 0x1c>;
+			};
+
+			spicc0: spi@50000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x50000 0x0 0x44>;
+				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SPICC0>,
+					 <&clkc_periphs CLKID_SPICC0_EN>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@58000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x58000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_A>,
+					 <&clkc_periphs CLKID_PWM_B>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@5a000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5a000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_C>,
+					 <&clkc_periphs CLKID_PWM_D>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@5c000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5c000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_E>,
+					 <&clkc_periphs CLKID_PWM_F>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_gh: pwm@5e000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5e000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_G>,
+					 <&clkc_periphs CLKID_PWM_H>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ij: pwm@60000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x60000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_I>,
+					 <&clkc_periphs CLKID_PWM_J>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@66000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x66000 0x0 0x20>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_A>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@68000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x68000 0x0 0x20>;
+				interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_B>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@6a000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6a000 0x0 0x20>;
+				interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@6c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6c000 0x0 0x20>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_D>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@6e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6e000 0x0 0x20>;
+				interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_E>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			nand: nand-controller@8c800 {
+				compatible = "amlogic,meson-axg-nfc";
+				reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>;
+				reg-names = "nfc", "emmc";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SD_EMMC_C>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "device";
+				status = "disabled";
+			};
+
+			uart_b: serial@7a000 {
 				compatible = "amlogic,meson-s4-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x7a000 0x0 0x18>;
 				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
 			};
 
 			reset: reset-controller@2000 {
@@ -142,6 +768,14 @@
 				#reset-cells = <1>;
 			};
 
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,s4-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
 			ir: ir@84040 {
 				compatible = "amlogic,meson-s4-ir";
 				reg = <0x0 0x84040 0x0 0x30>;
@@ -154,5 +788,70 @@
 				reg = <0x0 0x440788 0x0 0x0c>;
 			};
 		};
+
+		ethmac: ethernet@fdc00000 {
+			compatible = "amlogic,meson-axg-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xfdc00000 0x0 0x10000>,
+			      <0x0 0xfe024000 0x0 0x8>;
+
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			power-domains = <&pwrc PWRC_S4_ETH_ID>;
+			clocks = <&clkc_periphs CLKID_ETH>,
+				 <&clkc_pll CLKID_FCLK_DIV2>,
+				 <&clkc_pll CLKID_MPLL2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+		};
+
+		sdio: mmc@fe088000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe088000 0x0 0x800>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc_periphs CLKID_SDEMMC_A>,
+				 <&xtal>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_A>;
+			cap-sdio-irq;
+			keep-power-in-suspend;
+			status = "disabled";
+		};
+
+		sd: mmc@fe08a000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe08a000 0x0 0x800>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_periphs CLKID_SDEMMC_B>,
+				 <&clkc_periphs CLKID_SD_EMMC_B>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_B>;
+			status = "disabled";
+		};
+
+		emmc: mmc@fe08c000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe08c000 0x0 0x800>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_periphs CLKID_NAND>,
+				 <&xtal>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_NAND_EMMC>;
+			no-sdio;
+			no-sd;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
index 9b2eb6e42651..3c43d3490e14 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
index 6e34fd80ed71..445c1671ede7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
index 46a34731f7e2..9be3084b090d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
@@ -54,7 +54,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -63,7 +63,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -71,7 +71,7 @@
 		regulator-always-on;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -80,7 +80,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -105,7 +105,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao1v8: regulator-vddio_ao1v8 {
+	vddio_ao1v8: regulator-vddio-ao1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
@@ -147,28 +147,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -199,15 +195,11 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -215,8 +207,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
index 586034316ec3..eeaff22edade 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index f045bf851638..697855fec476 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -57,6 +57,10 @@
 				"Lineout", "ACODEC LOLP",
 				"Lineout", "ACODEC LORP";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index 62404743e62d..5e07f0f9538e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -82,7 +82,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -91,7 +91,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -99,7 +99,7 @@
 		regulator-always-on;
 	};
 
-	vddio_c: regulator-vddio_c {
+	vddio_c: regulator-vddio-c {
 		compatible = "regulator-gpio";
 		regulator-name = "VDDIO_C";
 		regulator-min-microvolt = <1800000>;
@@ -116,7 +116,7 @@
 			 <3300000 1>;
 	};
 
-	tflash_vdd: regulator-tflash_vdd {
+	tflash_vdd: regulator-tflash-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "TFLASH_VDD";
 		regulator-min-microvolt = <3300000>;
@@ -127,7 +127,7 @@
 		regulator-always-on;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -136,7 +136,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -165,7 +165,7 @@
 	};
 
 	/* USB Hub Power Enable */
-	vl_pwr_en: regulator-vl_pwr_en {
+	vl_pwr_en: regulator-vl-pwr-en {
 		compatible = "regulator-fixed";
 		regulator-name = "VL_PWR_EN";
 		regulator-min-microvolt = <5000000>;
@@ -185,28 +185,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
@@ -367,8 +363,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -386,11 +380,10 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	max-frequency = <50000000>;
+	/* Boot failures are observed at 50MHz */
+	max-frequency = <35000000>;
 	disable-wp;
 
-	/* TOFIX: SD card is barely usable in SDR modes */
-
 	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&tflash_vdd>;
 	vqmmc-supply = <&vddio_c>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
index e6e9410d40cb..7b3a014d4cde 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index 9c0b544e2209..a3d9b66b6878 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -51,35 +51,29 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index 846a2d6c20e5..0170139b8d32 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -43,7 +43,7 @@
 	};
 
 	/* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */
-	p12v_0: regulator-p12v_0 {
+	p12v_0: regulator-p12v-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "P12V_0";
 		regulator-min-microvolt = <12000000>;
@@ -56,7 +56,7 @@
 	};
 
 	/* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */
-	p12v_1: regulator-p12v_1 {
+	p12v_1: regulator-p12v-1 {
 		compatible = "regulator-fixed";
 		regulator-name = "P12V_1";
 		regulator-min-microvolt = <12000000>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index 1db2327bbd13..c4524eb4f099 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -28,7 +28,7 @@
 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
 	};
 
-	tflash_vdd: regulator-tflash_vdd {
+	tflash_vdd: regulator-tflash-vdd {
 		compatible = "regulator-fixed";
 
 		regulator-name = "TFLASH_VDD";
@@ -40,7 +40,7 @@
 		regulator-always-on;
 	};
 
-	tf_io: gpio-regulator-tf_io {
+	tf_io: gpio-regulator-tf-io {
 		compatible = "regulator-gpio";
 
 		regulator-name = "TF_IO";
@@ -59,7 +59,7 @@
 			 <1800000 1>;
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -68,7 +68,7 @@
 		regulator-always-on;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -76,7 +76,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "5V";
 		regulator-min-microvolt = <5000000>;
@@ -87,7 +87,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -96,7 +96,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -125,7 +125,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr_en: regulator-usb_pwr_en {
+	usb_pwr_en: regulator-usb-pwr-en {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR_EN";
 		regulator-min-microvolt = <5000000>;
@@ -137,7 +137,7 @@
 		enable-active-high;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -146,7 +146,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -174,6 +174,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -246,28 +250,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
@@ -388,8 +388,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
index 537370db360f..5daadfb170b4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
@@ -64,26 +64,22 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 095579c55f18..024d2eb8e6ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -32,7 +32,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
@@ -128,7 +127,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -137,7 +136,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -145,7 +144,7 @@
 		regulator-always-on;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -154,7 +153,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -164,7 +163,7 @@
 	};
 
 	/* Used by Tuner, RGB Led & IR Emitter LED array */
-	vddao_3v3_t: regulator-vddao_3v3_t {
+	vddao_3v3_t: regulator-vddao-3v3-t {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3_T";
 		regulator-min-microvolt = <3300000>;
@@ -193,7 +192,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao1v8: regulator-vddio_ao1v8 {
+	vddio_ao1v8: regulator-vddio-ao1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
@@ -240,6 +239,10 @@
 				"TODDR_B IN 1", "TDMIN_B OUT",
 				"TODDR_C IN 1", "TDMIN_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -356,28 +359,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
@@ -432,15 +431,11 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -448,8 +443,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
index fc9b961133cd..e4a3a2a8ad06 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
index 9ea969255b4f..fff92e0d6dd5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 643f94d9d08e..e5db8ce94062 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -17,10 +17,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_A";
-		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -28,10 +28,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_B";
-		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -39,10 +39,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_C";
-		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -55,6 +55,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -64,6 +70,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -73,6 +85,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -82,6 +100,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -90,6 +114,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x40000>; /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};
 
@@ -100,6 +127,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <770000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -275,8 +303,7 @@
 		};
 
 		tdmin_a: audio-controller@300 {
-			compatible = "amlogic,sm1-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,sm1-tdmin";
 			reg = <0x0 0x300 0x0 0x40>;
 			sound-name-prefix = "TDMIN_A";
 			resets = <&clkc_audio AUD_RESET_TDMIN_A>;
@@ -291,8 +318,7 @@
 		};
 
 		tdmin_b: audio-controller@340 {
-			compatible = "amlogic,sm1-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,sm1-tdmin";
 			reg = <0x0 0x340 0x0 0x40>;
 			sound-name-prefix = "TDMIN_B";
 			resets = <&clkc_audio AUD_RESET_TDMIN_B>;
@@ -307,8 +333,7 @@
 		};
 
 		tdmin_c: audio-controller@380 {
-			compatible = "amlogic,sm1-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,sm1-tdmin";
 			reg = <0x0 0x380 0x0 0x40>;
 			sound-name-prefix = "TDMIN_C";
 			resets = <&clkc_audio AUD_RESET_TDMIN_C>;
@@ -323,8 +348,7 @@
 		};
 
 		tdmin_lb: audio-controller@3c0 {
-			compatible = "amlogic,sm1-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,sm1-tdmin";
 			reg = <0x0 0x3c0 0x0 0x40>;
 			sound-name-prefix = "TDMIN_LB";
 			resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
@@ -339,7 +363,7 @@
 		};
 
 		spdifin: audio-controller@400 {
-			compatible = "amlogic,g12a-spdifin",
+			compatible = "amlogic,sm1-spdifin",
 				     "amlogic,axg-spdifin";
 			reg = <0x0 0x400 0x0 0x30>;
 			#sound-dai-cells = <0>;
@@ -353,7 +377,7 @@
 		};
 
 		spdifout_a: audio-controller@480 {
-			compatible = "amlogic,g12a-spdifout",
+			compatible = "amlogic,sm1-spdifout",
 				     "amlogic,axg-spdifout";
 			reg = <0x0 0x480 0x0 0x50>;
 			#sound-dai-cells = <0>;
@@ -518,6 +542,10 @@
 		     "amlogic,meson-gpio-intc";
 };
 
+&hdmi_tx {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
 &pcie {
 	power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
 };
diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts
index 2e8069002ec1..b1160780a2a6 100644
--- a/arch/arm64/boot/dts/apm/apm-merlin.dts
+++ b/arch/arm64/boot/dts/apm/apm-merlin.dts
@@ -15,7 +15,7 @@
 
 	chosen { };
 
-	memory {
+	memory@100000000 {
 		device_type = "memory";
 		reg = < 0x1 0x00000000 0x0 0x80000000 >;
 	};
@@ -32,7 +32,7 @@
 	};
 
 	poweroff_mbox: poweroff_mbox@10548000 {
-		compatible = "syscon";
+		compatible = "apm,merlin-poweroff-mailbox", "syscon";
 		reg = <0x0 0x10548000 0x0 0x30>;
 	};
 
diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
index 033e10e12b18..2ef658796746 100644
--- a/arch/arm64/boot/dts/apm/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
@@ -15,7 +15,7 @@
 
 	chosen { };
 
-	memory {
+	memory@100000000 {
 		device_type = "memory";
 		reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
 	};
@@ -32,7 +32,7 @@
 	};
 
 	poweroff_mbox: poweroff_mbox@10548000 {
-		compatible = "syscon";
+		compatible = "apm,mustang-poweroff-mailbox", "syscon";
 		reg = <0x0 0x10548000 0x0 0x30>;
 	};
 
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index 65ebac3082e2..5bbedb0a7107 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -22,7 +22,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
-			#clock-cells = <1>;
 			clocks = <&pmd0clk 0>;
 		};
 		cpu@1 {
@@ -32,7 +31,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
-			#clock-cells = <1>;
 			clocks = <&pmd0clk 0>;
 		};
 		cpu@100 {
@@ -42,7 +40,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
-			#clock-cells = <1>;
 			clocks = <&pmd1clk 0>;
 		};
 		cpu@101 {
@@ -52,7 +49,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
-			#clock-cells = <1>;
 			clocks = <&pmd1clk 0>;
 		};
 		cpu@200 {
@@ -62,7 +58,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
-			#clock-cells = <1>;
 			clocks = <&pmd2clk 0>;
 		};
 		cpu@201 {
@@ -72,7 +67,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
-			#clock-cells = <1>;
 			clocks = <&pmd2clk 0>;
 		};
 		cpu@300 {
@@ -82,7 +76,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
-			#clock-cells = <1>;
 			clocks = <&pmd3clk 0>;
 		};
 		cpu@301 {
@@ -92,7 +85,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
-			#clock-cells = <1>;
 			clocks = <&pmd3clk 0>;
 		};
 		xgene_L2_0: l2-cache-0 {
@@ -211,6 +203,13 @@
 		};
 	};
 
+	refclk: clock-100000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "refclk";
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <1 12 0xff04>;
@@ -225,6 +224,16 @@
 		clock-frequency = <50000000>;
 	};
 
+	i2cslimpro {
+		compatible = "apm,xgene-slimpro-i2c";
+		mboxes = <&mailbox 0>;
+	};
+
+	hwmonslimpro {
+		compatible = "apm,xgene-slimpro-hwmon";
+		mboxes = <&mailbox 7>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -236,17 +245,10 @@
 			#size-cells = <2>;
 			ranges;
 
-			refclk: refclk {
-				compatible = "fixed-clock";
-				#clock-cells = <1>;
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk";
-			};
-
 			pmdpll: pmdpll@170000f0 {
 				compatible = "apm,xgene-pcppll-v2-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				reg = <0x0 0x170000f0 0x0 0x10>;
 				clock-output-names = "pmdpll";
 			};
@@ -286,7 +288,7 @@
 			socpll: socpll@17000120 {
 				compatible = "apm,xgene-socpll-v2-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				reg = <0x0 0x17000120 0x0 0x1000>;
 				clock-output-names = "socpll";
 			};
@@ -585,16 +587,6 @@
 					0x0 0x7 0x4>;
 		};
 
-		i2cslimpro {
-			compatible = "apm,xgene-slimpro-i2c";
-			mboxes = <&mailbox 0>;
-		};
-
-		hwmonslimpro {
-			compatible = "apm,xgene-slimpro-hwmon";
-			mboxes = <&mailbox 7>;
-		};
-
 		serial0: serial@10600000 {
 			compatible = "ns16550";
 			reg = <0 0x10600000 0x0 0x1000>;
@@ -617,7 +609,7 @@
 		pcie0: pcie@1f2b0000 {
 			status = "disabled";
 			device_type = "pci";
-			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			compatible = "apm,xgene-pcie";
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
@@ -643,7 +635,7 @@
 		pcie1: pcie@1f2c0000 {
 			status = "disabled";
 			device_type = "pci";
-			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			compatible = "apm,xgene-pcie";
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
@@ -809,7 +801,6 @@
 			interrupts = <0 0x45 0x4>;
 			#clock-cells = <1>;
 			clocks = <&sbapbclk 0>;
-			bus_num = <1>;
 		};
 
 		i2c4: i2c@10640000 {
@@ -819,7 +810,6 @@
 			reg = <0x0 0x10640000 0x0 0x1000>;
 			interrupts = <0 0x3a 0x4>;
 			clocks = <&i2c4clk 0>;
-			bus_num = <4>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 988928c60f15..4ca0ead120c1 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -103,6 +103,7 @@
 
 	gic: interrupt-controller@78010000 {
 		compatible = "arm,cortex-a15-gic";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x78010000 0x0 0x1000>,	/* GIC Dist */
@@ -112,6 +113,13 @@
 		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
 	};
 
+	refclk: clock-100000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "refclk";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <1 0 0xff08>,	/* Secure Phys IRQ */
@@ -122,10 +130,20 @@
 	};
 
 	pmu {
-		compatible = "apm,potenza-pmu", "arm,armv8-pmuv3";
+		compatible = "apm,potenza-pmu";
 		interrupts = <1 12 0xff04>;
 	};
 
+	i2cslimpro {
+		compatible = "apm,xgene-slimpro-i2c";
+		mboxes = <&mailbox 0>;
+	};
+
+	hwmonslimpro {
+		compatible = "apm,xgene-slimpro-hwmon";
+		mboxes = <&mailbox 7>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -137,38 +155,29 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
-			refclk: refclk {
-				compatible = "fixed-clock";
-				#clock-cells = <1>;
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk";
-			};
 
 			pcppll: pcppll@17000100 {
 				compatible = "apm,xgene-pcppll-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				clock-names = "pcppll";
 				reg = <0x0 0x17000100 0x0 0x1000>;
 				clock-output-names = "pcppll";
-				type = <0>;
 			};
 
 			socpll: socpll@17000120 {
 				compatible = "apm,xgene-socpll-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				clock-names = "socpll";
 				reg = <0x0 0x17000120 0x0 0x1000>;
 				clock-output-names = "socpll";
-				type = <1>;
 			};
 
 			socplldiv2: socplldiv2  {
 				compatible = "fixed-factor-clock";
-				#clock-cells = <1>;
+				#clock-cells = <0>;
 				clocks = <&socpll 0>;
-				clock-names = "socplldiv2";
 				clock-mult = <1>;
 				clock-div = <2>;
 				clock-output-names = "socplldiv2";
@@ -177,7 +186,7 @@
 			ahbclk: ahbclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "div-reg";
 				divider-offset = <0x164>;
@@ -189,7 +198,7 @@
 			sdioclk: sdioclk@1f2ac000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2ac000 0x0 0x1000
 					0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg", "div-reg";
@@ -206,7 +215,7 @@
 			ethclk: ethclk {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				clock-names = "ethclk";
 				reg = <0x0 0x17000000 0x0 0x1000>;
 				reg-names = "div-reg";
@@ -228,7 +237,7 @@
 			sge0clk: sge0clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0xa>;
@@ -239,7 +248,7 @@
 			xge0clk: xge0clk@1f61c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f61c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0x3>;
@@ -250,7 +259,7 @@
 				compatible = "apm,xgene-device-clock";
 				status = "disabled";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f62c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0x3>;
@@ -260,7 +269,7 @@
 			sataphy1clk: sataphy1clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy1clk";
@@ -274,7 +283,7 @@
 			sataphy2clk: sataphy1clk@1f22c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f22c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy2clk";
@@ -288,7 +297,7 @@
 			sataphy3clk: sataphy1clk@1f23c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f23c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy3clk";
@@ -302,7 +311,7 @@
 			sata01clk: sata01clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata01clk";
@@ -315,7 +324,7 @@
 			sata23clk: sata23clk@1f22c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f22c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata23clk";
@@ -328,7 +337,7 @@
 			sata45clk: sata45clk@1f23c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f23c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata45clk";
@@ -341,7 +350,7 @@
 			rtcclk: rtcclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg";
 				csr-offset = <0xc>;
@@ -354,7 +363,7 @@
 			rngpkaclk: rngpkaclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg";
 				csr-offset = <0xc>;
@@ -368,7 +377,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2bc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie0clk";
@@ -378,7 +387,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2cc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie1clk";
@@ -388,7 +397,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2dc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie2clk";
@@ -398,7 +407,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f50c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie3clk";
@@ -408,7 +417,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f51c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie4clk";
@@ -417,7 +426,7 @@
 			dmaclk: dmaclk@1f27c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f27c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "dmaclk";
@@ -759,16 +768,6 @@
 					<0x0 0x7 0x4>;
 		};
 
-		i2cslimpro {
-			compatible = "apm,xgene-slimpro-i2c";
-			mboxes = <&mailbox 0>;
-		};
-
-		hwmonslimpro {
-			compatible = "apm,xgene-slimpro-hwmon";
-			mboxes = <&mailbox 7>;
-		};
-
 		serial0: serial@1c020000 {
 			status = "disabled";
 			compatible = "ns16550a";
@@ -848,9 +847,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0x0 0x10512000 0x0 0x1000>;
 			interrupts = <0 0x44 0x4>;
-			#clock-cells = <1>;
 			clocks = <&ahbclk 0>;
-			bus_num = <0>;
 		};
 
 		phy1: phy@1f21a000 {
@@ -996,7 +993,7 @@
 				compatible = "apm,xgene-mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				menetphy: menetphy@3 {
+				menetphy: ethernet-phy@3 {
 					compatible = "ethernet-phy-id001c.c915";
 					reg = <0x3>;
 				};
diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile
index aec5e29cdfb7..4eebcd85c90f 100644
--- a/arch/arm64/boot/dts/apple/Makefile
+++ b/arch/arm64/boot/dts/apple/Makefile
@@ -1,4 +1,73 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j71.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j73.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j85m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j86m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j87m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-n53.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j72.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j85.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j86.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j87.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-n51.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-j42d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-j96.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-j97.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-n102.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-n56.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-n61.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7001-j81.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7001-j82.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-j71s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-j72s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-n66.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-n69u.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-n71.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-j71t.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-j72t.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-n66m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-n69.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-n71m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8001-j127.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8001-j128.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8001-j98a.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8001-j99a.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-d101.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-d10.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-d111.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-d11.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-j171.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-j172.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-j71b.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-j72b.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-n112.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j105a.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j120.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j121.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j207.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j208.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j132.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j137.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j140a.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j140k.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j152f.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j160.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j174.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j185.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j185f.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j213.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j215.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j223.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j230k.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j214k.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j680.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j780.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d201.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d20.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d211.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d21.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d221.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d22.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j274.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j293.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j313.dtb
@@ -10,6 +79,15 @@ dtb-$(CONFIG_ARCH_APPLE) += t6000-j316s.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6001-j316c.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6001-j375c.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6002-j375d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6022-j180d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j414s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j414c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j416s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j416c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j474s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j475c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6022-j475d.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8112-j413.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j415.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8112-j473.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8112-j493.dtb
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-5s.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-5s.dtsi
new file mode 100644
index 000000000000..8868df1538d6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-5s.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 5s common device tree
+ * Based on A7 (APL0698), up to 1.3GHz
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s5l8960x.dtsi"
+#include "s5l8960x-common.dtsi"
+#include "s5l8960x-opp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&dwi_bl {
+	status = "okay";
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-air1.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-air1.dtsi
new file mode 100644
index 000000000000..dd57eb1d34c0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-air1.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air  common device tree
+ * Based on A7 (APL5698), up to 1.4GHz
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s5l8960x.dtsi"
+#include "s5l8960x-common.dtsi"
+#include "s5l8965x-opp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl 110 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-common.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-common.dtsi
new file mode 100644
index 000000000000..243480ca2356
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-common.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 5s, iPad mini 2/3, iPad Air
+ *
+ * This file contains parts common to all Apple A7 devices.
+ *
+ * target-type: J71, J72, J73, J85, J85m, J86, J86m, J87, J87m, N51, N53
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j71.dts b/arch/arm64/boot/dts/apple/s5l8960x-j71.dts
new file mode 100644
index 000000000000..e13036dacb45
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j71.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air (Wi-Fi), J71, iPad4,1 (A1474)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-air1.dtsi"
+
+/ {
+	compatible = "apple,j71", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad Air (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j72.dts b/arch/arm64/boot/dts/apple/s5l8960x-j72.dts
new file mode 100644
index 000000000000..afb71b8885c6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j72.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air (Cellular), J72, iPad4,2 (A1475)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-air1.dtsi"
+
+/ {
+	compatible = "apple,j72", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad Air (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j73.dts b/arch/arm64/boot/dts/apple/s5l8960x-j73.dts
new file mode 100644
index 000000000000..c871962df529
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j73.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air (Cellular, China), J73, iPad4,2 (A1476)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-air1.dtsi"
+
+/ {
+	compatible = "apple,j73", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad Air (Cellular, China)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j85.dts b/arch/arm64/boot/dts/apple/s5l8960x-j85.dts
new file mode 100644
index 000000000000..aefb7b36d7aa
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j85.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 2 (Wi-Fi), J85, iPad4,4 (A1489)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini2.dtsi"
+
+/ {
+	compatible = "apple,j85", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 2 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j85m.dts b/arch/arm64/boot/dts/apple/s5l8960x-j85m.dts
new file mode 100644
index 000000000000..ec2bcaa6d1d5
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j85m.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 3 (Wi-Fi), J85m, iPad4,7 (A1599)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini3.dtsi"
+
+/ {
+	compatible = "apple,j85m", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 3 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j86.dts b/arch/arm64/boot/dts/apple/s5l8960x-j86.dts
new file mode 100644
index 000000000000..470f2f825e70
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j86.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 2 (Cellular), J86, iPad4,5 (A1490)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini2.dtsi"
+
+/ {
+	compatible = "apple,j86", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 2 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j86m.dts b/arch/arm64/boot/dts/apple/s5l8960x-j86m.dts
new file mode 100644
index 000000000000..90311d98aaad
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j86m.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 3 (Cellular), J86m, iPad4,8 (A1600)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini3.dtsi"
+
+/ {
+	compatible = "apple,j86m", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 3 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j87.dts b/arch/arm64/boot/dts/apple/s5l8960x-j87.dts
new file mode 100644
index 000000000000..3580fd8e3831
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j87.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 2 (Cellular, China), J87, iPad4,6 (A1491)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini2.dtsi"
+
+/ {
+	compatible = "apple,j87", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 2 (Cellular, China)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j87m.dts b/arch/arm64/boot/dts/apple/s5l8960x-j87m.dts
new file mode 100644
index 000000000000..fa0da4fa6727
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j87m.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 3 (Cellular, China), J87m, iPad4,9 (A1601)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini3.dtsi"
+
+/ {
+	compatible = "apple,j87m", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 3 (Cellular, China)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-mini2.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-mini2.dtsi
new file mode 100644
index 000000000000..f3696d22e71c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-mini2.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 2 common device tree
+ * Based on A7 (APL0698), up to 1.3GHz
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s5l8960x.dtsi"
+#include "s5l8960x-common.dtsi"
+#include "s5l8960x-opp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-mini3.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-mini3.dtsi
new file mode 100644
index 000000000000..4e397b3d7d7a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-mini3.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 3 common device tree
+ * Based on A7 (APL0698), up to 1.3GHz
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/*
+ * The Mini 3 seems to be only an iteration over the Mini 2 with some
+ * small changes, like the introduction of Touch ID, hence there is little
+ * to no differentiation between these 2 for now.
+ */
+#include "s5l8960x-mini2.dtsi"
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-n51.dts b/arch/arm64/boot/dts/apple/s5l8960x-n51.dts
new file mode 100644
index 000000000000..cd52f814fbf2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-n51.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 5s (GSM), N51, iPhone6,1 (A1453/A1533)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-5s.dtsi"
+
+/ {
+	compatible = "apple,n51", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPhone 5s (GSM)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-n53.dts b/arch/arm64/boot/dts/apple/s5l8960x-n53.dts
new file mode 100644
index 000000000000..4795798a4444
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-n53.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 5s (LTE), N53, iPhone6,2 (A1457/A1518/A1528/A1530)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-5s.dtsi"
+
+/ {
+	compatible = "apple,n53", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPhone 5s (LTE)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-opp.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-opp.dtsi
new file mode 100644
index 000000000000..e4d568c4a119
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-opp.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Operating points for Apple S5L8960X "A7" SoC, Up to 1296 MHz
+ *
+ * target-type: N51, N53, J85, J86. J87, J85m, J86m, J87m
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	cyclone_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <15500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <43000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <26000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <4>;
+			clock-latency-ns = <30000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <5>;
+			clock-latency-ns = <39500>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-level = <6>;
+			clock-latency-ns = <45500>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-pmgr.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-pmgr.dtsi
new file mode 100644
index 000000000000..da265f484307
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-pmgr.dtsi
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple S5L8960X "A7" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@20000 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@20008 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_secuart0: power-controller@200f0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "secuart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_secuart1: power-controller@200f8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "secuart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_cpm: power-controller@20010 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_lio: power-controller@20018 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "lio";
+		apple,always-on; /* Core device */
+	};
+
+	ps_iomux: power-controller@20020 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "iomux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@20028 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_debug: power-controller@20030 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_dwi: power-controller@20038 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20038 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@20040 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_mca0: power-controller@20048 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@20050 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@20058 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@20060 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20060 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@20068 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20068 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@20070 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20070 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@20078 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20078 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@20080 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20080 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@20088 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20088 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@20090 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20090 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@20098 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20098 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@200a0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@200a8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@200b0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@200b8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@200c0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@200c8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@200d0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@200d8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@200e0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@200e8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio_p: power-controller@20110 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+	};
+
+	ps_usb: power-controller@20158 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@20160 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@20170 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@20180 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_disp_busmux: power-controller@201a8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp_busmux";
+	};
+
+	ps_media: power-controller@201d8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@201d0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+	};
+
+	ps_msr: power-controller@201e0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@201e8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@201b0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_aes0: power-controller@20100 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@20108 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@20118 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_hsic1_phy: power-controller@20120 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_hsic2_phy: power-controller@20128 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic2_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_ispsens0: power-controller@20130 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@20138 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_mcc: power-controller@20140 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Core device */
+	};
+
+	ps_mcu: power-controller@20148 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcu";
+		apple,always-on; /* Core device */
+	};
+
+	ps_amp: power-controller@20150 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "amp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb2host0_ohci: power-controller@20168 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usb2host1_ohci: power-controller@20178 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1_ohci";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_usbotg: power-controller@20188 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@20190 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@20198 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_cp: power-controller@201a0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_mipi_dsi: power-controller@201b8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_dp: power-controller@201c0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_disp1: power-controller@201c8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_vdec: power-controller@201f0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc: power-controller@201f8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_ans: power-controller@20200 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+	};
+
+	ps_ans_dll: power-controller@20208 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans_dll";
+		power-domains = <&ps_ans>;
+	};
+
+	ps_gfx: power-controller@20218 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@20268 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		power-domains = <&ps_secuart1>, <&ps_secuart0>;
+		apple,always-on; /* Locked on */
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x.dtsi b/arch/arm64/boot/dts/apple/s5l8960x.dtsi
new file mode 100644
index 000000000000..462ffdd348fc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S5L8960X "A7" SoC
+ *
+ * Other Names: H6, "Alcatraz"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ * Based on Asahi Linux's M1 (t8103.dtsi) and Corellium's A10 efforts.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,cyclone";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&cyclone_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,cyclone";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&cyclone_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,s5l8960x-cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0a0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0a0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 140 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 154 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 155 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 156 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 157 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,s5l8960x-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x24000>;
+		};
+
+		wdt: watchdog@20e027000 {
+			compatible = "apple,s5l8960x-wdt", "apple,wdt";
+			reg = <0x2 0x0e027000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,s5l8960x-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200010 {
+			compatible = "apple,s5l8960x-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200010 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@20e300000 {
+			compatible = "apple,s5l8960x-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0e300000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 200>;
+			apple,npins = <200>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(81, 1)>,
+					 <APPLE_PINMUX(80, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(83, 1)>,
+					 <APPLE_PINMUX(82, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(101, 1)>,
+					 <APPLE_PINMUX(100, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(172, 1)>,
+					 <APPLE_PINMUX(171, 1)>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A7 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "s5l8960x-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/s5l8965x-opp.dtsi b/arch/arm64/boot/dts/apple/s5l8965x-opp.dtsi
new file mode 100644
index 000000000000..d34dae74a90c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8965x-opp.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Operating points for Apple S5L8965X "A7" Rev A SoC, Up to 1392 MHz
+ *
+ * target-type: J71, J72, J73
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	cyclone_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <10000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <2>;
+			clock-latency-ns = <49000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <3>;
+			clock-latency-ns = <30000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <4>;
+			clock-latency-ns = <39500>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-level = <5>;
+			clock-latency-ns = <45500>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1392000000>;
+			opp-level = <6>;
+			clock-latency-ns = <46500>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s800-0-3-common.dtsi b/arch/arm64/boot/dts/apple/s800-0-3-common.dtsi
new file mode 100644
index 000000000000..cb42c5f2c1b6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800-0-3-common.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s, iPhone 6s Plus, iPad 5, iPhone SE
+ *
+ * This file contains parts common to all Apple A9 devices.
+ *
+ * target-type: J71s, J72s, N66, N69u, N71, J71t, J72t, N66m, N69, N71m
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&dwi_bl {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi b/arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi
new file mode 100644
index 000000000000..196b8e745a95
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi
@@ -0,0 +1,757 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple S8000/3 "A9" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80150 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80158 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pcie_ref: power-controller@80148 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80168 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80170 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80178 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80180 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80188 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@80190 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@80198 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801a0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801b0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@801f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@801f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80160 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_hsic1_phy: power-controller@80130 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_isp_sens0: power-controller@80138 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80140 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_usb: power-controller@80250 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80258 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80260 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80270 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@80280 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+	};
+
+	ps_media: power-controller@802d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@802c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@802e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@802d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@802b0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_pmp: power-controller@802e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@802f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_uart5: power-controller@80200 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@80208 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80210 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80218 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@80220 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80228 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80230 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80238 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80240 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80248 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_usb2host0_ohci: power-controller@80268 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usb2host1_ohci: power-controller@80278 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1_ohci";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_usb2host2_ohci: power-controller@80288 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2_ohci";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_usbotg: power-controller@80290 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@80298 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802a0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mipi_dsi: power-controller@802b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_dp: power-controller@802c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_vdec: power-controller@802f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc: power-controller@80308 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@80310 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@80318 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_pcie_link0: power-controller@80320 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link0";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link1: power-controller@80328 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link1";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link2: power-controller@80330 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link2";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link3: power-controller@80338 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link3";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_gfx: power-controller@80340 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_venc_pipe: power-controller@88000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@88008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_busif &ps_aop_cpu &ps_aop_filter>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+		power-domains = <&ps_aop>;
+	};
+
+	ps_aop_cpu: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80048 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80050 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s800-0-3.dtsi b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
new file mode 100644
index 000000000000..bb38662b7d2e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8000/S8003 "A9" SoC
+ *
+ * This file contains parts common to both variants of A9
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,twister";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,twister";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,s8000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 206 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 207 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 208 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,s8000-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200080 {
+			compatible = "apple,s8000-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200080 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 208>;
+			apple,npins = <208>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(46, 1)>,
+					 <APPLE_PINMUX(45, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(115, 1)>,
+					 <APPLE_PINMUX(114, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(23, 1)>,
+					 <APPLE_PINMUX(22, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 42>;
+			apple,npins = <42>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 119 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2102b0000 {
+			compatible = "apple,s8000-wdt", "apple,wdt";
+			reg = <0x2 0x102b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A9 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "s800-0-3-pmgr.dtsi"
+
+/*
+ * The A9 was made by two separate fabs on two different process
+ * nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
+ */
diff --git a/arch/arm64/boot/dts/apple/s8000-j71s.dts b/arch/arm64/boot/dts/apple/s8000-j71s.dts
new file mode 100644
index 000000000000..b5a2dfa1121e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-j71s.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 (Wi-Fi) (Samsung), J71s, iPad6,11 (A1822)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-ipad5.dtsi"
+
+/ {
+	compatible = "apple,j71s", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPad 5 (Wi-Fi) (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000-j72s.dts b/arch/arm64/boot/dts/apple/s8000-j72s.dts
new file mode 100644
index 000000000000..8f3dea5adb09
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-j72s.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 (Cellular) (Samsung), J72s, iPad6,12 (A1823)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-ipad5.dtsi"
+
+/ {
+	compatible = "apple,j72s", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPad 5 (Cellular) (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000-n66.dts b/arch/arm64/boot/dts/apple/s8000-n66.dts
new file mode 100644
index 000000000000..30b4b6630b60
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-n66.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s Plus (Samsung), N66, iPhone8,2 (A1634/A1687/A1690/A1699)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-6s.dtsi"
+
+/ {
+	compatible = "apple,n66", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPhone 6s Plus (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000-n69u.dts b/arch/arm64/boot/dts/apple/s8000-n69u.dts
new file mode 100644
index 000000000000..e63bc2e7f7c1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-n69u.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone SE (Samsung), N69u, iPhone8,4 (A1662/A1723/A1724)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-se.dtsi"
+
+/ {
+	compatible = "apple,n69u", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPhone SE (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000-n71.dts b/arch/arm64/boot/dts/apple/s8000-n71.dts
new file mode 100644
index 000000000000..f2964a1fc434
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-n71.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s (Samsung), N71, iPhone8,1 (A1633/A1688/A1691/A1700)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-6s.dtsi"
+
+/ {
+	compatible = "apple,n71", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPhone 6s (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000.dtsi b/arch/arm64/boot/dts/apple/s8000.dtsi
new file mode 100644
index 000000000000..72322f5677ab
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8000 "A9" (Samsung) SoC
+ *
+ * Other names: H8P, "Maui"
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+#include "s800-0-3.dtsi"
+
+/ {
+	twister_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <650>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <75000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <27000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <4>;
+			clock-latency-ns = <32000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-level = <5>;
+			clock-latency-ns = <35000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <6>;
+			clock-latency-ns = <45000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-level = <7>;
+			clock-latency-ns = <58000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <1844000000>;
+			opp-level = <8>;
+			clock-latency-ns = <58000>;
+			turbo-mode;
+		};
+#endif
+	};
+};
+
+/*
+ * The A9 was made by two separate fabs on two different process
+ * nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
+ */
diff --git a/arch/arm64/boot/dts/apple/s8001-common.dtsi b/arch/arm64/boot/dts/apple/s8001-common.dtsi
new file mode 100644
index 000000000000..91b06e113894
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-common.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (9.7-inch), iPad Pro (12.9-inch)
+ *
+ * This file contains parts common to all Apple A9X devices.
+ *
+ * target-type: J127, J128, J98a, J99a
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0 &ps_dp0>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j127.dts b/arch/arm64/boot/dts/apple/s8001-j127.dts
new file mode 100644
index 000000000000..8b522085cb3e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j127.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (9.7-inch) (Wi-Fi), J127, iPad6,3 (A1673)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8001-pro.dtsi"
+
+/ {
+	compatible = "apple,j127", "apple,s8001", "apple,arm-platform";
+	model = "Apple iPad Pro (9.7-inch) (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j128.dts b/arch/arm64/boot/dts/apple/s8001-j128.dts
new file mode 100644
index 000000000000..cdd3d06dcbf1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j128.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (9.7-inch) (Cellular), J128, iPad6,4 (A1674/A1675)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8001-pro.dtsi"
+
+/ {
+	compatible = "apple,j128", "apple,s8001", "apple,arm-platform";
+	model = "Apple iPad Pro (9.7-inch) (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j98a-j99a.dtsi b/arch/arm64/boot/dts/apple/s8001-j98a-j99a.dtsi
new file mode 100644
index 000000000000..e66a4c1c138f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j98a-j99a.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (12.9-inch)
+ *
+ * This file contains parts common to iPad Pro (12.9-inch).
+ *
+ * target-type: J98a, J99a
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+&ps_dcs4 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs5 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs6 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs7 {
+	apple,always-on; /* LPDDR4 interface */
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j98a.dts b/arch/arm64/boot/dts/apple/s8001-j98a.dts
new file mode 100644
index 000000000000..162eca05c2d9
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j98a.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (12.9-inch) (Wi-Fi), J98a, iPad6,7 (A1584)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8001-pro.dtsi"
+#include "s8001-j98a-j99a.dtsi"
+
+/ {
+	compatible = "apple,j98a", "apple,s8001", "apple,arm-platform";
+	model = "Apple iPad Pro (12.9-inch) (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j99a.dts b/arch/arm64/boot/dts/apple/s8001-j99a.dts
new file mode 100644
index 000000000000..7b765820c69e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j99a.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (12.9-inch) (Cellular), J99a, iPad6,8 (A1652)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8001-pro.dtsi"
+#include "s8001-j98a-j99a.dtsi"
+
+/ {
+	compatible = "apple,j99a", "apple,s8001", "apple,arm-platform";
+	model = "Apple iPad Pro (12.9-inch) (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-pmgr.dtsi b/arch/arm64/boot/dts/apple/s8001-pmgr.dtsi
new file mode 100644
index 000000000000..859ab77ae92b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-pmgr.dtsi
@@ -0,0 +1,822 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple S8001 "A9X" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80148 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80150 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pcie_ref: power-controller@80140 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80160 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80168 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80170 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80178 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80180 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@80188 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@80190 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@80198 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801a0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801b0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@801e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@801f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@801f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80158 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_isp_sens0: power-controller@80130 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80138 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb: power-controller@80278 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80280 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80288 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80298 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@802a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_disp1mux: power-controller@802e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1mux";
+	};
+
+	ps_disp0: power-controller@802d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_disp1: power-controller@802f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp1mux>;
+	};
+
+	ps_uart6: power-controller@80200 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80208 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80210 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@80218 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80230 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80238 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80240 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80248 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80250 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs4: power-controller@80258 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+	};
+
+	ps_dcs5: power-controller@80260 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+	};
+
+	ps_dcs6: power-controller@80268 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+	};
+
+	ps_dcs7: power-controller@80270 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+	};
+
+	ps_usb2host0_ohci: power-controller@80290 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@802b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@802c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_dp0: power-controller@802e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp0";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_dp1: power-controller@802f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp1";
+		power-domains = <&ps_disp1>;
+	};
+
+	ps_dpa0: power-controller@80220 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa0";
+	};
+
+	ps_dpa1: power-controller@80228 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa1";
+	};
+
+	ps_media: power-controller@80308 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@80300 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@80318 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@80310 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc: power-controller@80340 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@80348 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_srs: power-controller@80390 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "srs";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie_aux: power-controller@80350 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_pcie_link0: power-controller@80358 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link0";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link1: power-controller@80360 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link1";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link2: power-controller@80368 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link2";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link3: power-controller@80370 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link3";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link4: power-controller@80378 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link4";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link5: power-controller@80380 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link5";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_vdec: power-controller@80330 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_gfx: power-controller@80388 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_pmp: power-controller@80320 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@80328 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on*/
+	};
+
+	ps_venc_pipe: power-controller@88000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@88008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_cpu &ps_aop_filter &ps_aop_busif>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+	};
+
+	ps_aop_cpu: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80048 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80050 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-pro.dtsi b/arch/arm64/boot/dts/apple/s8001-pro.dtsi
new file mode 100644
index 000000000000..1fce5a7c4200
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-pro.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (1st generation) common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s8001.dtsi"
+#include "s8001-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 122 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 123 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s8001.dtsi b/arch/arm64/boot/dts/apple/s8001.dtsi
new file mode 100644
index 000000000000..b5b00dca6ffa
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001.dtsi
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8001 "A9X" SoC
+ *
+ * Other names: H8G, "Elba"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,twister";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,twister";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>;
+		};
+	};
+
+	twister_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <800>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <53000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-level = <3>;
+			clock-latency-ns = <18000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1080000000>;
+			opp-level = <4>;
+			clock-latency-ns = <21000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-level = <5>;
+			clock-latency-ns = <25000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-level = <6>;
+			clock-latency-ns = <33000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2160000000>;
+			opp-level = <7>;
+			clock-latency-ns = <45000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <2160000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,s8000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 218 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 234 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 235 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,s8000-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 219>;
+			apple,npins = <219>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(165, 1)>,
+					 <APPLE_PINMUX(164, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(178, 1)>,
+					 <APPLE_PINMUX(177, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(132, 1)>,
+					 <APPLE_PINMUX(131, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(115, 1)>,
+					 <APPLE_PINMUX(114, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 28>;
+			apple,npins = <28>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 134 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2102b0000 {
+			compatible = "apple,s8000-wdt", "apple,wdt";
+			reg = <0x2 0x102b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A9X doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "s8001-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/s8003-j71t.dts b/arch/arm64/boot/dts/apple/s8003-j71t.dts
new file mode 100644
index 000000000000..0d906ae80b07
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-j71t.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 (Wi-Fi) (TSMC), J71t, iPad6,11 (A1822)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-ipad5.dtsi"
+
+/ {
+	compatible = "apple,j71t", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPad 5 (Wi-Fi) (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003-j72t.dts b/arch/arm64/boot/dts/apple/s8003-j72t.dts
new file mode 100644
index 000000000000..0cd7d88e9dfb
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-j72t.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 (Cellular) (TSMC), J72t, iPad6,12 (A1823)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-ipad5.dtsi"
+
+/ {
+	compatible = "apple,j72t", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPad 5 (Cellular) (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003-n66m.dts b/arch/arm64/boot/dts/apple/s8003-n66m.dts
new file mode 100644
index 000000000000..4146cd28160d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-n66m.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s Plus (TSMC), N66m, iPhone8,2 (A1634/A1687/A1690/A1699)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-6s.dtsi"
+
+/ {
+	compatible = "apple,n66m", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPhone 6s Plus (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003-n69.dts b/arch/arm64/boot/dts/apple/s8003-n69.dts
new file mode 100644
index 000000000000..8eed879b155e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-n69.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone SE (TSMC), N69, iPhone8,4 (A1662/A1723/A1724)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-se.dtsi"
+
+/ {
+	compatible = "apple,n69", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPhone SE (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003-n71m.dts b/arch/arm64/boot/dts/apple/s8003-n71m.dts
new file mode 100644
index 000000000000..7ec6d2cda0bf
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-n71m.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s (TSMC), N71m, iPhone8,1 (A1633/A1688/A1691/A1700)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-6s.dtsi"
+
+/ {
+	compatible = "apple,n71m", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPhone 6s (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003.dtsi b/arch/arm64/boot/dts/apple/s8003.dtsi
new file mode 100644
index 000000000000..79df5c783260
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8003 "A9" (TSMC) SoC
+ *
+ * Other names: H8P, "Malta"
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+#include "s800-0-3.dtsi"
+
+/ {
+	twister_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <45000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <22000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <4>;
+			clock-latency-ns = <25000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-level = <5>;
+			clock-latency-ns = <28000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <6>;
+			clock-latency-ns = <35000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-level = <7>;
+			clock-latency-ns = <38000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <1844000000>;
+			opp-level = <8>;
+			clock-latency-ns = <38000>;
+			turbo-mode;
+		};
+#endif
+	};
+};
+
+/*
+ * The A9 was made by two separate fabs on two different process
+ * nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
+ */
diff --git a/arch/arm64/boot/dts/apple/s800x-6s.dtsi b/arch/arm64/boot/dts/apple/s800x-6s.dtsi
new file mode 100644
index 000000000000..1dcf80cc2920
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800x-6s.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s / 6S Plus common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s800-0-3-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 96 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 97 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 67 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 66 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl_ap 149 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/s800x-ipad5.dtsi b/arch/arm64/boot/dts/apple/s800x-ipad5.dtsi
new file mode 100644
index 000000000000..c1701e81f0c1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800x-ipad5.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s800-0-3-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 96 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 97 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 143 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 144 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
diff --git a/arch/arm64/boot/dts/apple/s800x-se.dtsi b/arch/arm64/boot/dts/apple/s800x-se.dtsi
new file mode 100644
index 000000000000..deb7c7cc90f6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800x-se.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone SE common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s800-0-3-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 96 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 97 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 67 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 66 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl_ap 149 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/spi1-nvram.dtsi b/arch/arm64/boot/dts/apple/spi1-nvram.dtsi
new file mode 100644
index 000000000000..9740fbf200f0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/spi1-nvram.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Devicetree include for common spi-nor nvram flash.
+//
+// Apple uses a consistent configiguration for the nvram on all known M1* and
+// M2* devices.
+//
+// Copyright The Asahi Linux Contributors
+
+/ {
+	aliases {
+		nvram = &nvram;
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nvram: partition@700000 {
+				label = "nvram";
+				/* To be filled by the loader */
+				reg = <0x0 0x0>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t6000-j314s.dts b/arch/arm64/boot/dts/apple/t6000-j314s.dts
index c9e192848fe3..1430b91ff1b1 100644
--- a/arch/arm64/boot/dts/apple/t6000-j314s.dts
+++ b/arch/arm64/boot/dts/apple/t6000-j314s.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j314s", "apple,t6000", "apple,arm-platform";
 	model = "Apple MacBook Pro (14-inch, M1 Pro, 2021)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,maldives";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,maldives";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000-j316s.dts b/arch/arm64/boot/dts/apple/t6000-j316s.dts
index ff1803ce2300..da0cbe7d9673 100644
--- a/arch/arm64/boot/dts/apple/t6000-j316s.dts
+++ b/arch/arm64/boot/dts/apple/t6000-j316s.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j316s", "apple,t6000", "apple,arm-platform";
 	model = "Apple MacBook Pro (16-inch, M1 Pro, 2021)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,madagascar";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,madagascar";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000.dtsi b/arch/arm64/boot/dts/apple/t6000.dtsi
index 89c3b211b116..0ad77c98073f 100644
--- a/arch/arm64/boot/dts/apple/t6000.dtsi
+++ b/arch/arm64/boot/dts/apple/t6000.dtsi
@@ -16,3 +16,7 @@
 };
 
 /delete-node/ &pmgr_south;
+
+&gpu {
+	compatible = "apple,agx-g13s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j314c.dts b/arch/arm64/boot/dts/apple/t6001-j314c.dts
index 1761d15b98c1..c37097dcfdb3 100644
--- a/arch/arm64/boot/dts/apple/t6001-j314c.dts
+++ b/arch/arm64/boot/dts/apple/t6001-j314c.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j314c", "apple,t6001", "apple,arm-platform";
 	model = "Apple MacBook Pro (14-inch, M1 Max, 2021)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,maldives";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,maldives";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j316c.dts b/arch/arm64/boot/dts/apple/t6001-j316c.dts
index 750e9beeffc0..3bc6e0c3294c 100644
--- a/arch/arm64/boot/dts/apple/t6001-j316c.dts
+++ b/arch/arm64/boot/dts/apple/t6001-j316c.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j316c", "apple,t6001", "apple,arm-platform";
 	model = "Apple MacBook Pro (16-inch, M1 Max, 2021)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,madagascar";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,madagascar";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j375c.dts b/arch/arm64/boot/dts/apple/t6001-j375c.dts
index 62ea437b58b2..2e7c23714d4d 100644
--- a/arch/arm64/boot/dts/apple/t6001-j375c.dts
+++ b/arch/arm64/boot/dts/apple/t6001-j375c.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j375c", "apple,t6001", "apple,arm-platform";
 	model = "Apple Mac Studio (M1 Max, 2022)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,okinawa";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,okinawa";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001.dtsi b/arch/arm64/boot/dts/apple/t6001.dtsi
index 620b17e4031f..ffbe823b71bc 100644
--- a/arch/arm64/boot/dts/apple/t6001.dtsi
+++ b/arch/arm64/boot/dts/apple/t6001.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 #include "multi-die-cpp.h"
 
@@ -61,3 +62,7 @@
 		};
 	};
 };
+
+&gpu {
+	compatible = "apple,agx-g13c", "apple,agx-g13s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6002-j375d.dts b/arch/arm64/boot/dts/apple/t6002-j375d.dts
index 3365429bdc8b..2b7f80119618 100644
--- a/arch/arm64/boot/dts/apple/t6002-j375d.dts
+++ b/arch/arm64/boot/dts/apple/t6002-j375d.dts
@@ -38,6 +38,14 @@
 	};
 };
 
+&wifi0 {
+	brcm,board-type = "apple,okinawa";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,okinawa";
+};
+
 /* delete unused always-on power-domains on die 1 */
 
 /delete-node/ &ps_atc2_usb_aon_die1;
diff --git a/arch/arm64/boot/dts/apple/t6002.dtsi b/arch/arm64/boot/dts/apple/t6002.dtsi
index a963a5011799..8fb648836b53 100644
--- a/arch/arm64/boot/dts/apple/t6002.dtsi
+++ b/arch/arm64/boot/dts/apple/t6002.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 #include "multi-die-cpp.h"
 
@@ -299,3 +300,7 @@
 	// On t6002, the die0 GPU power domain needs both AFR power domains
 	power-domains = <&ps_afr>, <&ps_afr_die1>;
 };
+
+&gpu {
+	compatible = "apple,agx-g13d", "apple,agx-g13s";
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-common.dtsi b/arch/arm64/boot/dts/apple/t600x-common.dtsi
index fa8ead699363..e20234ef2135 100644
--- a/arch/arm64/boot/dts/apple/t600x-common.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-common.dtsi
@@ -11,6 +11,10 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		gpu = &gpu;
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -362,6 +366,13 @@
 		clock-output-names = "clkref";
 	};
 
+	clk_200m: clock-200m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "clk_200m";
+	};
+
 	/*
 	 * This is a fabulated representation of the input clock
 	 * to NCO since we don't know the true clock tree.
@@ -371,4 +382,34 @@
 		#clock-cells = <0>;
 		clock-output-names = "nco_ref";
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpu_globals: globals {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_a: hw-cal-a {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_b: hw-cal-b {
+			status = "disabled";
+		};
+
+		uat_handoff: uat-handoff {
+			status = "disabled";
+		};
+
+		uat_pagetables: uat-pagetables {
+			status = "disabled";
+		};
+
+		uat_ttbs: uat-ttbs {
+			status = "disabled";
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
index b1c875e692c8..3603b276a2ab 100644
--- a/arch/arm64/boot/dts/apple/t600x-die0.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
@@ -24,6 +24,41 @@
 		power-domains = <&ps_aic>;
 	};
 
+	smc: smc@290400000 {
+		compatible = "apple,t6000-smc", "apple,smc";
+		reg = <0x2 0x90400000 0x0 0x4000>,
+			<0x2 0x91e00000 0x0 0x100000>;
+		reg-names = "smc", "sram";
+		mboxes = <&smc_mbox>;
+
+		smc_gpio: gpio {
+			compatible = "apple,smc-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		smc_reboot: reboot {
+			compatible = "apple,smc-reboot";
+			nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+				<&boot_error_count>, <&panic_count>;
+			nvmem-cell-names = "shutdown_flag", "boot_stage",
+				"boot_error_count", "panic_count";
+		};
+	};
+
+	smc_mbox: mbox@290408000 {
+		compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x2 0x90408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 754 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 755 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 756 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 757 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
 	pinctrl_smc: pinctrl@290820000 {
 		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
 		reg = <0x2 0x90820000 0x0 0x4000>;
@@ -45,6 +80,63 @@
 				<AIC_IRQ 0 749 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	nub_spmi0: spmi@2920a1300 {
+		compatible = "apple,t6000-spmi", "apple,spmi";
+		reg = <0x2 0x920a1300 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		pmic1: pmic@f {
+			compatible = "apple,maverick-pmic", "apple,spmi-nvmem";
+			reg = <0xf SPMI_USID>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				pm_setting: pm-setting@1405 {
+					reg = <0x1405 0x1>;
+				};
+
+				rtc_offset: rtc-offset@1411 {
+					reg = <0x1411 0x6>;
+				};
+
+				boot_stage: boot-stage@6001 {
+					reg = <0x6001 0x1>;
+				};
+
+				boot_error_count: boot-error-count@6002,0 {
+					reg = <0x6002 0x1>;
+					bits = <0 4>;
+				};
+
+				panic_count: panic-count@6002,4 {
+					reg = <0x6002 0x1>;
+					bits = <4 4>;
+				};
+
+				boot_error_stage: boot-error-stage@6003 {
+					reg = <0x6003 0x1>;
+				};
+
+				shutdown_flag: shutdown-flag@600f,3 {
+					reg = <0x600f 0x1>;
+					bits = <3 1>;
+				};
+
+				fault_shadow: fault-shadow@867b {
+					reg = <0x867b 0x10>;
+				};
+
+				socd: socd@8b00 {
+					reg = <0x8b00 0x400>;
+				};
+			};
+		};
+	};
+
 	wdt: watchdog@2922b0000 {
 		compatible = "apple,t6000-wdt", "apple,wdt";
 		reg = <0x2 0x922b0000 0x0 0x4000>;
@@ -163,6 +255,34 @@
 		status = "disabled";
 	};
 
+	spi1: spi@39b104000 {
+		compatible = "apple,t6000-spi", "apple,spi";
+		reg = <0x3 0x9b104000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1107 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clk_200m>;
+		pinctrl-0 = <&spi1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi1>;
+		status = "disabled";
+	};
+
+	spi3: spi@39b10c000 {
+		compatible = "apple,t6000-spi", "apple,spi";
+		reg = <0x3 0x9b10c000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1109 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkref>;
+		pinctrl-0 = <&spi3_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi3>;
+		status = "disabled";
+	};
+
 	serial0: serial@39b200000 {
 		compatible = "apple,s5l-uart";
 		reg = <0x3 0x9b200000 0x0 0x1000>;
@@ -217,6 +337,34 @@
 		#sound-dai-cells = <1>;
 	};
 
+	gpu: gpu@406400000 {
+		compatible = "apple,agx-g13s";
+		reg = <0x4 0x6400000 0 0x40000>,
+			<0x4 0x4000000 0 0x1000000>;
+		reg-names = "asc", "sgx";
+		mboxes = <&agx_mbox>;
+		power-domains = <&ps_gfx>;
+		memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+				<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+		memory-region-names = "ttbs", "pagetables", "handoff",
+				      "hw-cal-a", "hw-cal-b", "globals";
+
+		apple,firmware-abi = <0 0 0>;
+	};
+
+	agx_mbox: mbox@406408000 {
+		compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x4 0x6408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1059 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1060 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1061 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1062 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
 	pcie0_dart_0: iommu@581008000 {
 		compatible = "apple,t6000-dart";
 		reg = <0x5 0x81008000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi b/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
index b31f1a7a2b3f..1a994c3c1b79 100644
--- a/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
@@ -36,6 +36,20 @@
 			<APPLE_PINMUX(101, 1)>;
 	};
 
+	spi1_pins: spi1-pins {
+		pinmux = <APPLE_PINMUX(10, 1)>,
+			<APPLE_PINMUX(11, 1)>,
+			<APPLE_PINMUX(32, 1)>,
+			<APPLE_PINMUX(33, 1)>;
+	};
+
+	spi3_pins: spi3-pins {
+		pinmux = <APPLE_PINMUX(52, 1)>,
+			<APPLE_PINMUX(53, 1)>,
+			<APPLE_PINMUX(54, 1)>,
+			<APPLE_PINMUX(55, 1)>;
+	};
+
 	pcie_pins: pcie-pins {
 		pinmux = <APPLE_PINMUX(0, 1)>,
 				<APPLE_PINMUX(1, 1)>,
diff --git a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
index 2e471dfe43cf..c0aac59a6fae 100644
--- a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
@@ -13,6 +13,7 @@
 
 / {
 	aliases {
+		bluetooth0 = &bluetooth0;
 		serial0 = &serial0;
 		wifi0 = &wifi0;
 	};
@@ -99,9 +100,18 @@
 	/* WLAN */
 	bus-range = <1 1>;
 	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
 	};
 };
 
@@ -119,3 +129,5 @@
 &fpwm0 {
 	status = "okay";
 };
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t600x-j375.dtsi b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
index 1e5a19e49b08..c0fb93ae72f4 100644
--- a/arch/arm64/boot/dts/apple/t600x-j375.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
@@ -11,6 +11,8 @@
 
 / {
 	aliases {
+		bluetooth0 = &bluetooth0;
+		ethernet0 = &ethernet0;
 		serial0 = &serial0;
 		wifi0 = &wifi0;
 	};
@@ -84,9 +86,18 @@
 	/* WLAN */
 	bus-range = <1 1>;
 	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
 	};
 };
 
@@ -126,3 +137,5 @@
 &pcie0_dart_3 {
 	status = "okay";
 };
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t6020-j414s.dts b/arch/arm64/boot/dts/apple/t6020-j414s.dts
new file mode 100644
index 000000000000..631c54c5f03d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j414s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M2 Pro, 2023)
+ *
+ * target-type: J414s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j414s", "apple,t6020", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M2 Pro, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,tokara";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,tokara";
+};
diff --git a/arch/arm64/boot/dts/apple/t6020-j416s.dts b/arch/arm64/boot/dts/apple/t6020-j416s.dts
new file mode 100644
index 000000000000..c277ed5889a2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j416s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M2 Pro, 2023)
+ *
+ * target-type: J416s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j416s", "apple,t6020", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M2 Pro, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,amami";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,amami";
+};
diff --git a/arch/arm64/boot/dts/apple/t6020-j474s.dts b/arch/arm64/boot/dts/apple/t6020-j474s.dts
new file mode 100644
index 000000000000..7c7ad5b8ad18
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j474s.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac mini (M2 Pro, 2023)
+ *
+ * target-type: J474s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+
+/*
+ * This model is very similar to M1 and M2 Mac Studio models so base it on those
+ * and remove the missing SDHCI controller.
+ */
+
+#include "t602x-j474-j475.dtsi"
+
+/ {
+	compatible = "apple,j474s", "apple,t6020", "apple,arm-platform";
+	model = "Apple Mac mini (M2 Pro, 2023)";
+};
+
+/* PCIe devices */
+&wifi0 {
+	compatible = "pci14e4,4434";
+	brcm,board-type = "apple,tasmania";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+	brcm,board-type = "apple,tasmania";
+};
+
+/*
+ * port01 is unused, remove the PCIe sdhci0 node from t600x-j375.dtsi and adjust
+ * the iommu-map.
+ */
+/delete-node/ &sdhci0;
+
+&pcie0 {
+	iommu-map = <0x100 &pcie0_dart_0 1 1>,
+			<0x200 &pcie0_dart_2 1 1>,
+			<0x300 &pcie0_dart_3 1 1>;
+};
diff --git a/arch/arm64/boot/dts/apple/t6020.dtsi b/arch/arm64/boot/dts/apple/t6020.dtsi
new file mode 100644
index 000000000000..bffa66a3ffff
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6020 "M2 Pro" SoC
+ *
+ * Other names: H14J, "Rhodes Chop"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* This chip is just a cut down version of t6021, so include it and disable the missing parts */
+
+#include "t6021.dtsi"
+
+/ {
+	compatible = "apple,t6020", "apple,arm-platform";
+};
+
+/delete-node/ &pmgr_south;
+
+&gpu {
+	compatible = "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j414c.dts b/arch/arm64/boot/dts/apple/t6021-j414c.dts
new file mode 100644
index 000000000000..cdcf0740714d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j414c.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M2 Max, 2023)
+ *
+ * target-type: J414c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j414c", "apple,t6021", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M2 Max, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,tokara";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,tokara";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j416c.dts b/arch/arm64/boot/dts/apple/t6021-j416c.dts
new file mode 100644
index 000000000000..6d8146b94170
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j416c.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M2 Max, 2022)
+ *
+ * target-type: J416c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j416c", "apple,t6021", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M2 Max, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,amami";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,amami";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j475c.dts b/arch/arm64/boot/dts/apple/t6021-j475c.dts
new file mode 100644
index 000000000000..533e35774874
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j475c.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M2 Max, 2023)
+ *
+ * target-type: J475c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j474-j475.dtsi"
+
+/ {
+	compatible = "apple,j475c", "apple,t6021", "apple,arm-platform";
+	model = "Apple Mac Studio (M2 Max, 2023)";
+};
+
+&wifi0 {
+	compatible = "pci14e4,4434";
+	brcm,board-type = "apple,canary";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+	brcm,board-type = "apple,canary";
+};
+
+/* enable PCIe port01 with SDHCI */
+&port01 {
+	status = "okay";
+};
+
+&pcie0_dart_1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021.dtsi b/arch/arm64/boot/dts/apple/t6021.dtsi
new file mode 100644
index 000000000000..62907ad6a546
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6021 "M2 Max" SoC
+ *
+ * Other names: H14J, "Rhodes"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "multi-die-cpp.h"
+
+#include "t602x-common.dtsi"
+
+/ {
+	compatible = "apple,t6021", "apple,arm-platform";
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&{/soc} {
+	#include "t602x-die0.dtsi"
+	#include "t602x-dieX.dtsi"
+	#include "t602x-nvme.dtsi"
+};
+
+#include "t602x-gpio-pins.dtsi"
+#include "t602x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01 &cpu_e02 &cpu_e03>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13>;
+		};
+	};
+};
+
+&gpu {
+	compatible = "apple,agx-g14c", "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6022-j180d.dts b/arch/arm64/boot/dts/apple/t6022-j180d.dts
new file mode 100644
index 000000000000..dca6bd167c22
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-j180d.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Pro (M2 Ultra, 2023)
+ *
+ * target-type: J180d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6022.dtsi"
+#include "t6022-jxxxd.dtsi"
+
+/ {
+	compatible = "apple,j180d", "apple,t6022", "apple,arm-platform";
+	model = "Apple Mac Pro (M2 Ultra, 2023)";
+	aliases {
+		nvram = &nvram;
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+			power-domains = <&ps_dispext0_cpu0_die1>, <&ps_dptx_phy_ps_die1>;
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C Rear */
+&i2c0 {
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm3: usb-pd@3c {
+		compatible = "apple,cd321x";
+		reg = <0x3c>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* hpm4 and hpm5 included from t6022-jxxxd.dtsi */
+
+	hpm6: usb-pd@3d {
+		compatible = "apple,cd321x";
+		reg = <0x3d>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm7: usb-pd@3e {
+		compatible = "apple,cd321x";
+		reg = <0x3e>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/* USB Type C Front */
+&i2c3 {
+	status = "okay";
+
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/*
+ * Delete unused PCIe nodes, the Mac Pro uses slightly different PCIe
+ * controllers with a single port connected to a PM40100 PCIe switch
+ */
+/delete-node/ &pcie0;
+/delete-node/ &pcie0_dart_0;
+/delete-node/ &pcie0_dart_1;
+/delete-node/ &pcie0_dart_2;
+/delete-node/ &pcie0_dart_3;
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t6022-j475d.dts b/arch/arm64/boot/dts/apple/t6022-j475d.dts
new file mode 100644
index 000000000000..736594544f79
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-j475d.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M2 Ultra, 2023)
+ *
+ * target-type: J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6022.dtsi"
+#include "t602x-j474-j475.dtsi"
+#include "t6022-jxxxd.dtsi"
+
+/ {
+	compatible = "apple,j475d", "apple,t6022", "apple,arm-platform";
+	model = "Apple Mac Studio (M2 Ultra, 2023)";
+};
+
+&framebuffer0 {
+	power-domains = <&ps_dispext0_cpu0_die1>, <&ps_dptx_phy_ps_die1>;
+};
+
+/* enable PCIe port01 with SDHCI */
+&port01 {
+	status = "okay";
+};
+
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&wifi0 {
+	compatible = "pci14e4,4434";
+	brcm,board-type = "apple,canary";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+	brcm,board-type = "apple,canary";
+};
diff --git a/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi b/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi
new file mode 100644
index 000000000000..4f7bf2ebfe39
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Pro (M2 Ultra, 2023) and Mac Studio (M2 Ultra, 2023)
+ *
+ * This file contains the parts common to J180 and J475 devices with t6022.
+ *
+ * target-type: J180d / J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* delete power-domains for missing disp0 / disp0_die1 */
+/delete-node/ &ps_disp0_cpu0;
+/delete-node/ &ps_disp0_fe;
+
+/delete-node/ &ps_disp0_cpu0_die1;
+/delete-node/ &ps_disp0_fe_die1;
+
+/* USB Type C */
+&i2c0 {
+	/* front-right */
+	hpm4: usb-pd@39 {
+		compatible = "apple,cd321x";
+		reg = <0x39>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* front-left */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t6022.dtsi b/arch/arm64/boot/dts/apple/t6022.dtsi
new file mode 100644
index 000000000000..e73bf2f7510a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022.dtsi
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6022 "M2 Ultra" SoC
+ *
+ * Other names: H14J, "Rhodes 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "multi-die-cpp.h"
+
+#include "t602x-common.dtsi"
+
+/ {
+	compatible = "apple,t6022", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		cpu-map {
+			cluster3 {
+				core0 {
+					cpu = <&cpu_e10>;
+				};
+				core1 {
+					cpu = <&cpu_e11>;
+				};
+				core2 {
+					cpu = <&cpu_e12>;
+				};
+				core3 {
+					cpu = <&cpu_e13>;
+				};
+			};
+
+			cluster4 {
+				core0 {
+					cpu = <&cpu_p20>;
+				};
+				core1 {
+					cpu = <&cpu_p21>;
+				};
+				core2 {
+					cpu = <&cpu_p22>;
+				};
+				core3 {
+					cpu = <&cpu_p23>;
+				};
+			};
+
+			cluster5 {
+				core0 {
+					cpu = <&cpu_p30>;
+				};
+				core1 {
+					cpu = <&cpu_p31>;
+				};
+				core2 {
+					cpu = <&cpu_p32>;
+				};
+				core3 {
+					cpu = <&cpu_p33>;
+				};
+			};
+		};
+
+		cpu_e10: cpu@800 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x800>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e11: cpu@801 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x801>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e12: cpu@802 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x802>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e13: cpu@803 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x803>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_p20: cpu@10900 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10900>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p21: cpu@10901 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10901>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p22: cpu@10902 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10902>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p23: cpu@10903 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10903>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p30: cpu@10a00 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a00>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p31: cpu@10a01 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a01>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p32: cpu@10a02 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a02>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p33: cpu@10a03 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a03>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		l2_cache_3: l2-cache-3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_4: l2-cache-4 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+
+		l2_cache_5: l2-cache-5 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+	};
+
+	die0: soc@200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x02 0x00000000 0x02 0x00000000 0x4 0x00000000>,
+			 <0x05 0x80000000 0x05 0x80000000 0x1 0x80000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0xf 0x80000000>,
+			 <0x16 0x80000000 0x16 0x80000000 0x5 0x80000000>;
+		nonposted-mmio;
+		/* Required to get >32-bit DMA via DARTs */
+		dma-ranges = <0 0 0 0 0xffffffff 0xffffc000>;
+
+		// filled via templated includes at the end of the file
+	};
+
+	die1: soc@2200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x02 0x00000000 0x22 0x00000000 0x4 0x00000000>,
+			 <0x07 0x00000000 0x27 0x00000000 0xf 0x80000000>,
+			 <0x16 0x80000000 0x36 0x80000000 0x5 0x80000000>;
+		nonposted-mmio;
+		/* Required to get >32-bit DMA via DARTs */
+		dma-ranges = <0 0 0 0 0xffffffff 0xffffc000>;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&die0 {
+	#include "t602x-die0.dtsi"
+	#include "t602x-dieX.dtsi"
+};
+
+#include "t602x-pmgr.dtsi"
+#include "t602x-gpio-pins.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+#define DIE _die1
+#define DIE_NO 1
+
+&die1 {
+	#include "t602x-dieX.dtsi"
+	#include "t602x-nvme.dtsi"
+};
+
+#include "t602x-pmgr.dtsi"
+
+/delete-node/ &ps_pmp_die1;
+
+#undef DIE
+#undef DIE_NO
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01 &cpu_e02 &cpu_e03
+				&cpu_e10 &cpu_e11 &cpu_e12 &cpu_e13>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13
+				&cpu_p20 &cpu_p21 &cpu_p22 &cpu_p23
+				&cpu_p30 &cpu_p31 &cpu_p32 &cpu_p33>;
+		};
+	};
+};
+
+&ps_gfx {
+	// On t6022, the die0 GPU power domain needs both AFR power domains
+	power-domains = <&ps_afr>, <&ps_afr_die1>;
+};
+
+&gpu {
+	compatible = "apple,agx-g14d", "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-common.dtsi b/arch/arm64/boot/dts/apple/t602x-common.dtsi
new file mode 100644
index 000000000000..9c800a391e7e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-common.dtsi
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Nodes common to all T602x family SoCs (M2 Pro/Max/Ultra)
+ *
+ * Other names: H14J, "Rhodes Chop", "Rhodes", "Rhodes 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpu = &gpu;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e00>;
+				};
+				core1 {
+					cpu = <&cpu_e01>;
+				};
+				core2 {
+					cpu = <&cpu_e02>;
+				};
+				core3 {
+					cpu = <&cpu_e03>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p00>;
+				};
+				core1 {
+					cpu = <&cpu_p01>;
+				};
+				core2 {
+					cpu = <&cpu_p02>;
+				};
+				core3 {
+					cpu = <&cpu_p03>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu_p10>;
+				};
+				core1 {
+					cpu = <&cpu_p11>;
+				};
+				core2 {
+					cpu = <&cpu_p12>;
+				};
+				core3 {
+					cpu = <&cpu_p13>;
+				};
+			};
+		};
+
+		cpu_e00: cpu@0 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e01: cpu@1 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e02: cpu@2 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e03: cpu@3 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_p00: cpu@10100 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p01: cpu@10101 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p02: cpu@10102 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p03: cpu@10103 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p10: cpu@10200 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p11: cpu@10201 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p12: cpu@10202 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10202>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p13: cpu@10203 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10203>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+
+		l2_cache_2: l2-cache-2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+	 };
+
+	blizzard_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		/* pstate #1 is a dummy clone of #2 */
+		opp02 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <2>;
+			clock-latency-ns = <7700>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <3>;
+			clock-latency-ns = <25000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1752000000>;
+			opp-level = <4>;
+			clock-latency-ns = <33000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2004000000>;
+			opp-level = <5>;
+			clock-latency-ns = <38000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <2256000000>;
+			opp-level = <6>;
+			clock-latency-ns = <44000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2424000000>;
+			opp-level = <7>;
+			clock-latency-ns = <48000>;
+		};
+	};
+
+	avalanche_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp01 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7400>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <948000000>;
+			opp-level = <2>;
+			clock-latency-ns = <18000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1188000000>;
+			opp-level = <3>;
+			clock-latency-ns = <21000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1452000000>;
+			opp-level = <4>;
+			clock-latency-ns = <24000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <5>;
+			clock-latency-ns = <28000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1968000000>;
+			opp-level = <6>;
+			clock-latency-ns = <31000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-level = <7>;
+			clock-latency-ns = <33000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2568000000>;
+			opp-level = <9>;
+			clock-latency-ns = <47000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2724000000>;
+			opp-level = <10>;
+			clock-latency-ns = <50000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2868000000>;
+			opp-level = <11>;
+			clock-latency-ns = <52000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <3000000000>;
+			opp-level = <12>;
+			clock-latency-ns = <57000>;
+		};
+		opp13 {
+			opp-hz = /bits/ 64 <3132000000>;
+			opp-level = <13>;
+			clock-latency-ns = <60000>;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3264000000>;
+			opp-level = <14>;
+			clock-latency-ns = <64000>;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3360000000>;
+			opp-level = <15>;
+			clock-latency-ns = <64000>;
+			turbo-mode;
+		};
+		opp16 {
+			opp-hz = /bits/ 64 <3408000000>;
+			opp-level = <16>;
+			clock-latency-ns = <64000>;
+			turbo-mode;
+		};
+		opp17 {
+			opp-hz = /bits/ 64 <3504000000>;
+			opp-level = <17>;
+			clock-latency-ns = <64000>;
+			turbo-mode;
+		};
+	};
+
+	pmu-e {
+		compatible = "apple,blizzard-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,avalanche-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ 0 AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	clk_200m: clock-200m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "clk_200m";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpu_globals: globals {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_a: hw-cal-a {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_b: hw-cal-b {
+			status = "disabled";
+		};
+
+		uat_handoff: uat-handoff {
+			status = "disabled";
+		};
+
+		uat_pagetables: uat-pagetables {
+			status = "disabled";
+		};
+
+		uat_ttbs: uat-ttbs {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-die0.dtsi b/arch/arm64/boot/dts/apple/t602x-die0.dtsi
new file mode 100644
index 000000000000..2e7d2bf08ddc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-die0.dtsi
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on die 0 on the Apple T6022 "M2 Ultra" SoC and present on
+ * Apple T6020 / T6021 "M2 Pro" / "M2 Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	nco: clock-controller@28e03c000 {
+		compatible = "apple,t6020-nco", "apple,t8103-nco";
+		reg = <0x2 0x8e03c000 0x0 0x14000>;
+		clocks = <&nco_clkref>;
+		#clock-cells = <1>;
+	};
+
+	aic: interrupt-controller@28e100000 {
+		compatible = "apple,t6020-aic", "apple,aic2";
+		#interrupt-cells = <4>;
+		interrupt-controller;
+		reg = <0x2 0x8e100000 0x0 0xc000>,
+			<0x2 0x8e10c000 0x0 0x1000>;
+		reg-names = "core", "event";
+		power-domains = <&ps_aic>;
+	};
+
+	nub_spmi0: spmi@29e114000 {
+		compatible = "apple,t6020-spmi", "apple,t8103-spmi";
+		reg = <0x2 0x9e114000 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		pmic1: pmic@f {
+			compatible = "apple,maverick-pmic", "apple,spmi-nvmem";
+			reg = <0xb SPMI_USID>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				pm_setting: pm-setting@1405 {
+					reg = <0x1405 0x1>;
+				};
+
+				rtc_offset: rtc-offset@1411 {
+					reg = <0x1411 0x6>;
+				};
+
+				boot_stage: boot-stage@6001 {
+					reg = <0x6001 0x1>;
+				};
+
+				boot_error_count: boot-error-count@6002,0 {
+					reg = <0x6002 0x1>;
+					bits = <0 4>;
+				};
+
+				panic_count: panic-count@6002,4 {
+					reg = <0x6002 0x1>;
+					bits = <4 4>;
+				};
+
+				boot_error_stage: boot-error-stage@6003 {
+					reg = <0x6003 0x1>;
+				};
+
+				shutdown_flag: shutdown-flag@600f,3 {
+					reg = <0x600f 0x1>;
+					bits = <3 1>;
+				};
+
+				fault_shadow: fault-shadow@867b {
+					reg = <0x867b 0x10>;
+				};
+
+				socd: socd@8b00 {
+					reg = <0x8b00 0x400>;
+				};
+			};
+		};
+	};
+
+	wdt: watchdog@29e2c4000 {
+		compatible = "apple,t6020-wdt", "apple,t8103-wdt";
+		reg = <0x2 0x9e2c4000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 719 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	smc_mbox: mbox@2a2408000 {
+		compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x2 0xa2408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 862 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 863 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 864 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 865 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
+	smc: smc@2a2400000 {
+		compatible = "apple,t6020-smc", "apple,t8103-smc";
+		reg = <0x2 0xa2400000 0x0 0x4000>,
+			<0x2 0xa3e00000 0x0 0x100000>;
+		reg-names = "smc", "sram";
+		mboxes = <&smc_mbox>;
+
+		smc_gpio: gpio {
+			compatible = "apple,smc-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		smc_reboot: reboot {
+			compatible = "apple,smc-reboot";
+			nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+				<&boot_error_count>, <&panic_count>;
+			nvmem-cell-names = "shutdown_flag", "boot_stage",
+				"boot_error_count", "panic_count";
+		};
+	};
+
+	pinctrl_smc: pinctrl@2a2820000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x2 0xa2820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pinctrl_smc 0 0 30>;
+		apple,npins = <30>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 851 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 852 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 853 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 854 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 855 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 856 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 857 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sio_dart: iommu@39b008000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x3 0x9b008000 0x0 0x8000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1231 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	fpwm0: pwm@39b030000 {
+		compatible = "apple,t6020-fpwm", "apple,s5l-fpwm";
+		reg = <0x3 0x9b030000 0x0 0x4000>;
+		power-domains = <&ps_fpwm0>;
+		clocks = <&clkref>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@39b040000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b040000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1219 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c0_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c0>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+	};
+
+	i2c1: i2c@39b044000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b044000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1220 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c1>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@39b048000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b048000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1221 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c2_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c2>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@39b04c000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b04c000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1222 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c3_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c3>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@39b050000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b050000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1223 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c4_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c4>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1224 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c5_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c5>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1225 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c6_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c6>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1226 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c7_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c7>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1227 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c8_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c8>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	spi1: spi@39b104000 {
+		compatible = "apple,t6020-spi", "apple,t8103-spi";
+		reg = <0x3 0x9b104000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clk_200m>;
+		pinctrl-0 = <&spi1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi1>;
+		status = "disabled";
+	};
+
+	spi2: spi@39b108000 {
+		compatible = "apple,t6020-spi", "apple,t8103-spi";
+		reg = <0x3 0x9b108000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1207 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkref>;
+		pinctrl-0 = <&spi2_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi2>;
+		status = "disabled";
+	};
+
+	spi4: spi@39b110000 {
+		compatible = "apple,t6020-spi", "apple,t8103-spi";
+		reg = <0x3 0x9b110000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1209 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkref>;
+		pinctrl-0 = <&spi4_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi4>;
+		status = "disabled";
+	};
+
+	serial0: serial@39b200000 {
+		compatible = "apple,s5l-uart";
+		reg = <0x3 0x9b200000 0x0 0x4000>;
+		reg-io-width = <4>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1198 IRQ_TYPE_LEVEL_HIGH>;
+		/*
+		 * TODO: figure out the clocking properly, there may
+		 * be a third selectable clock.
+		 */
+		clocks = <&clkref>, <&clkref>;
+		clock-names = "uart", "clk_uart_baud0";
+		power-domains = <&ps_uart0>;
+		status = "disabled";
+	};
+
+	admac: dma-controller@39b400000 {
+		compatible = "apple,t6020-admac", "apple,t8103-admac";
+		reg = <0x3 0x9b400000 0x0 0x34000>;
+		#dma-cells = <1>;
+		dma-channels = <16>;
+		interrupts-extended = <0>,
+				      <&aic AIC_IRQ 0 1218 IRQ_TYPE_LEVEL_HIGH>,
+				      <0>,
+				      <0>;
+		iommus = <&sio_dart 2>;
+		power-domains = <&ps_sio_adma>;
+		resets = <&ps_audio_p>;
+	};
+
+	mca: mca@39b600000 {
+		compatible = "apple,t6020-mca", "apple,t8103-mca";
+		reg = <0x3 0x9b600000 0x0 0x10000>,
+		      <0x3 0x9b500000 0x0 0x20000>;
+		clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
+		dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+		       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+		       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+		       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
+		dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+			    "tx1a", "rx1a", "tx1b", "rx1b",
+			    "tx2a", "rx2a", "tx2b", "rx2b",
+			    "tx3a", "rx3a", "tx3b", "rx3b";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1211 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1212 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1213 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1214 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+				<&ps_mca2>, <&ps_mca3>;
+		resets = <&ps_audio_p>;
+		#sound-dai-cells = <1>;
+	};
+
+	gpu: gpu@406400000 {
+		compatible = "apple,agx-g14s";
+		reg = <0x4 0x6400000 0 0x40000>,
+			<0x4 0x4000000 0 0x1000000>;
+		reg-names = "asc", "sgx";
+		mboxes = <&agx_mbox>;
+		power-domains = <&ps_gfx>;
+		memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+				<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+		memory-region-names = "ttbs", "pagetables", "handoff",
+				      "hw-cal-a", "hw-cal-b", "globals";
+
+		apple,firmware-abi = <0 0 0>;
+	};
+
+	agx_mbox: mbox@406408000 {
+		compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x4 0x6408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1143 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1144 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1145 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
+	pcie0: pcie@580000000 {
+		compatible = "apple,t6020-pcie";
+		device_type = "pci";
+
+		reg = <0x5 0x80000000 0x0 0x1000000>,	/* config */
+			<0x5 0x91000000 0x0 0x4000>,	/* rc */
+			<0x5 0x94008000 0x0 0x4000>,	/* port0 */
+			<0x5 0x95008000 0x0 0x4000>,	/* port1 */
+			<0x5 0x96008000 0x0 0x4000>,	/* port2 */
+			<0x5 0x97008000 0x0 0x4000>,	/* port3 */
+			<0x5 0x9e00c000 0x0 0x4000>,	/* phy0 */
+			<0x5 0x9e010000 0x0 0x4000>,	/* phy1 */
+			<0x5 0x9e014000 0x0 0x4000>,	/* phy2 */
+			<0x5 0x9e018000 0x0 0x4000>;	/* phy3 */
+		reg-names = "config", "rc",
+			"port0", "port1", "port2", "port3",
+			"phy0", "phy1", "phy2", "phy3";
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1340 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1344 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1348 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1352 IRQ_TYPE_LEVEL_HIGH>;
+
+		msi-controller;
+		msi-parent = <&pcie0>;
+		msi-ranges = <&aic AIC_IRQ 0 1672 IRQ_TYPE_EDGE_RISING 32>;
+
+		iommu-map = <0x100 &pcie0_dart_0 1 1>,
+				<0x200 &pcie0_dart_1 1 1>,
+				<0x300 &pcie0_dart_2 1 1>,
+				<0x400 &pcie0_dart_3 1 1>;
+		iommu-map-mask = <0xff00>;
+
+		bus-range = <0 4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x43000000 0x5 0xa0000000 0x5 0xa0000000 0x0 0x20000000>,
+				<0x02000000 0x0 0xc0000000 0x5 0xc0000000 0x0 0x40000000>;
+
+		power-domains = <&ps_apcie_gp_sys>;
+		pinctrl-0 = <&pcie_pins>;
+		pinctrl-names = "default";
+
+		port00: pci@0,0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 4 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+					<0 0 0 2 &port00 0 0 0 1>,
+					<0 0 0 3 &port00 0 0 0 2>,
+					<0 0 0 4 &port00 0 0 0 3>;
+		};
+
+		port01: pci@1,0 {
+			device_type = "pci";
+			reg = <0x800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 5 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+					<0 0 0 2 &port01 0 0 0 1>,
+					<0 0 0 3 &port01 0 0 0 2>,
+					<0 0 0 4 &port01 0 0 0 3>;
+			status = "disabled";
+		};
+
+		port02: pci@2,0 {
+			device_type = "pci";
+			reg = <0x1000 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 6 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+					<0 0 0 2 &port02 0 0 0 1>,
+					<0 0 0 3 &port02 0 0 0 2>,
+					<0 0 0 4 &port02 0 0 0 3>;
+			status = "disabled";
+		};
+
+		port03: pci@3,0 {
+			device_type = "pci";
+			reg = <0x1800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 7 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+					<0 0 0 2 &port03 0 0 0 1>,
+					<0 0 0 3 &port03 0 0 0 2>,
+					<0 0 0 4 &port03 0 0 0 3>;
+			status = "disabled";
+		};
+	};
+
+	pcie0_dart_0: iommu@594000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x94000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1341 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_1: iommu@595000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x95000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1345 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0_dart_2: iommu@596000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x96000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1349 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0_dart_3: iommu@597000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x97000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1353 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
diff --git a/arch/arm64/boot/dts/apple/t602x-dieX.dtsi b/arch/arm64/boot/dts/apple/t602x-dieX.dtsi
new file mode 100644
index 000000000000..cb07fd82b32e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-dieX.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Nodes present on both dies of T6022 (M2 Ultra) and present on M2 Pro/Max.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(cpufreq_e): cpufreq@210e20000 {
+		compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+		reg = <0x2 0x10e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p0): cpufreq@211e20000 {
+		compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+		reg = <0x2 0x11e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p1): cpufreq@212e20000 {
+		compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+		reg = <0x2 0x12e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(pmgr): power-management@28e080000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e080000 0 0x8000>;
+	};
+
+	DIE_NODE(pmgr_south): power-management@28e680000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e680000 0 0x8000>;
+	};
+
+	DIE_NODE(pmgr_east): power-management@290280000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x90280000 0 0xc000>;
+	};
+
+	DIE_NODE(pinctrl_nub): pinctrl@29e1f0000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x2 0x9e1f0000 0x0 0x4000>;
+		power-domains = <&DIE_NODE(ps_nub_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_nub) 0 0 30>;
+		apple,npins = <30>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 711 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 712 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 713 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 714 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 715 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 716 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 717 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pmgr_mini): power-management@29e280000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x9e280000 0 0x4000>;
+	};
+
+	DIE_NODE(pinctrl_aop): pinctrl@2a6820000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x2 0xa6820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_aop) 0 0 72>;
+		apple,npins = <72>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 598 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 599 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 600 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 601 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 602 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 603 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 604 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pinctrl_ap): pinctrl@39b028000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x3 0x9b028000 0x0 0x4000>;
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 458 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 459 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 460 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 461 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 462 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 463 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 464 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&clkref>;
+		power-domains = <&DIE_NODE(ps_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_ap) 0 0 255>;
+		apple,npins = <255>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	DIE_NODE(pmgr_gfx): power-management@404e80000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		reg = <0x4 0x4e80000 0 0x4000>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi b/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi
new file mode 100644
index 000000000000..e41b6475f792
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * GPIO pin mappings for Apple T602x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&pinctrl_ap {
+	i2c0_pins: i2c0-pins {
+		pinmux = <APPLE_PINMUX(63, 1)>,
+			<APPLE_PINMUX(64, 1)>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinmux = <APPLE_PINMUX(65, 1)>,
+			<APPLE_PINMUX(66, 1)>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinmux = <APPLE_PINMUX(67, 1)>,
+			<APPLE_PINMUX(68, 1)>;
+	};
+
+	i2c3_pins: i2c3-pins {
+		pinmux = <APPLE_PINMUX(69, 1)>,
+			<APPLE_PINMUX(70, 1)>;
+	};
+
+	i2c4_pins: i2c4-pins {
+		pinmux = <APPLE_PINMUX(71, 1)>,
+			<APPLE_PINMUX(72, 1)>;
+	};
+
+	i2c5_pins: i2c5-pins {
+		pinmux = <APPLE_PINMUX(73, 1)>,
+			<APPLE_PINMUX(74, 1)>;
+	};
+
+	i2c6_pins: i2c6-pins {
+		pinmux = <APPLE_PINMUX(75, 1)>,
+			<APPLE_PINMUX(76, 1)>;
+	};
+
+	i2c7_pins: i2c7-pins {
+		pinmux = <APPLE_PINMUX(77, 1)>,
+			<APPLE_PINMUX(78, 1)>;
+	};
+
+	i2c8_pins: i2c8-pins {
+		pinmux = <APPLE_PINMUX(79, 1)>,
+			<APPLE_PINMUX(80, 1)>;
+	};
+
+	spi1_pins: spi1-pins {
+		pinmux = <APPLE_PINMUX(155, 1)>, /* SDI */
+			<APPLE_PINMUX(156, 1)>,  /* SDO */
+			<APPLE_PINMUX(157, 1)>,  /* SCK */
+			<APPLE_PINMUX(158, 1)>;  /* CS */
+	};
+
+	spi2_pins: spi2-pins {
+		pinmux = <APPLE_PINMUX(159, 1)>, /* SDI */
+			<APPLE_PINMUX(160, 1)>,  /* SDO */
+			<APPLE_PINMUX(161, 1)>,  /* SCK */
+			<APPLE_PINMUX(162, 1)>;  /* CS */
+	};
+
+	spi4_pins: spi4-pins {
+		pinmux = <APPLE_PINMUX(167, 1)>, /* SDI */
+			<APPLE_PINMUX(168, 1)>,  /* SDO */
+			<APPLE_PINMUX(169, 1)>,  /* SCK */
+			<APPLE_PINMUX(170, 1)>;  /* CS */
+	};
+
+	pcie_pins: pcie-pins {
+		pinmux = <APPLE_PINMUX(0, 1)>,
+				<APPLE_PINMUX(1, 1)>,
+				<APPLE_PINMUX(2, 1)>,
+				<APPLE_PINMUX(3, 1)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi b/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi
new file mode 100644
index 000000000000..0e806d8ddf81
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14/16-inch, 2022)
+ *
+ * This file contains the parts common to J414 and J416 devices with both t6020 and t6021.
+ *
+ * target-type: J414s / J414c / J416s / J416c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/*
+ * These models are essentially identical to the previous generation, other than
+ * the GPIO indices.
+ */
+
+#include "t600x-j314-j316.dtsi"
+
+&framebuffer0 {
+	power-domains = <&ps_disp0_cpu0>, <&ps_dptx_phy_ps>;
+};
+
+&hpm0 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm1 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm2 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm5 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&wifi0 {
+	compatible = "pci14e4,4434";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi b/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi
new file mode 100644
index 000000000000..ee12fea5b12c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac mini (M2 Pro, 2023) and Mac Studio (2023)
+ *
+ * This file contains the parts common to J474 and J475 devices with t6020,
+ * t6021 and t6022.
+ *
+ * target-type: J474s / J475c / J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/*
+ * These models are very similar to the previous generation Mac Studio, other
+ * than GPIO indices.
+ */
+
+#include "t600x-j375.dtsi"
+
+&framebuffer0 {
+	power-domains = <&ps_dispext0_cpu0>, <&ps_dptx_phy_ps>;
+};
+
+&hpm0 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm1 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm2 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm3  {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-nvme.dtsi b/arch/arm64/boot/dts/apple/t602x-nvme.dtsi
new file mode 100644
index 000000000000..590cec8ac804
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-nvme.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * NVMe related devices for Apple T602x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(ans_mbox): mbox@347408000 {
+		compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x3 0x47408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 1169 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1170 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1171 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1172 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		power-domains = <&DIE_NODE(ps_ans2)>;
+		#mbox-cells = <0>;
+	};
+
+	DIE_NODE(sart): sart@34bc50000 {
+		compatible = "apple,t6020-sart", "apple,t6000-sart";
+		reg = <0x3 0x4bc50000 0x0 0x10000>;
+		power-domains = <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(nvme): nvme@34bcc0000 {
+		compatible = "apple,t6020-nvme-ans2", "apple,t8103-nvme-ans2";
+		reg = <0x3 0x4bcc0000 0x0 0x40000>, <0x3 0x47400000 0x0 0x4000>;
+		reg-names = "nvme", "ans";
+		interrupt-parent = <&aic>;
+		/* The NVME interrupt is always routed to die 0 */
+		interrupts = <AIC_IRQ 0 1832 IRQ_TYPE_LEVEL_HIGH>;
+		mboxes = <&DIE_NODE(ans_mbox)>;
+		apple,sart = <&DIE_NODE(sart)>;
+		power-domains = <&DIE_NODE(ps_ans2)>,
+			<&DIE_NODE(ps_apcie_st_sys)>,
+			<&DIE_NODE(ps_apcie_st1_sys)>;
+		power-domain-names = "ans", "apcie0", "apcie1";
+		resets = <&DIE_NODE(ps_ans2)>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi b/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi
new file mode 100644
index 000000000000..f5382a2faf0b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi
@@ -0,0 +1,2265 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for Apple T602x "M2 Pro/Max/Ultra" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&DIE_NODE(pmgr) {
+	DIE_NODE(ps_afi): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afi);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_aic): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aic);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_dwi): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dwi);
+	};
+
+	DIE_NODE(ps_pms): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_gpio): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gpio);
+		power-domains = <&DIE_NODE(ps_sio)>, <&DIE_NODE(ps_pms)>;
+	};
+
+	DIE_NODE(ps_soc_dpe): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(soc_dpe);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pms_c1ppt): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_c1ppt);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pmgr_soc_ocla): power-controller@138 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmgr_soc_ocla);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_amcc0): power-controller@168 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc0);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc2): power-controller@170 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc2);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_00): power-controller@178 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_00);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_01): power-controller@180 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_01);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_02): power-controller@188 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_02);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_03): power-controller@190 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_03);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_08): power-controller@198 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_08);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_09): power-controller@1a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_09);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_10): power-controller@1a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_10);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_11): power-controller@1b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_11);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afnc1_ioa): power-controller@1b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afc): power-controller@1d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afc);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afnc0_ioa): power-controller@1e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc1_ls): power-controller@1f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc0_ls): power-controller@1f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw0): power-controller@200 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw1): power-controller@208 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw2): power-controller@210 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw2);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc0_lw0): power-controller@218 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ls)>;
+	};
+
+	DIE_NODE(ps_scodec): power-controller@220 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(scodec);
+		power-domains = <&DIE_NODE(ps_afnc1_lw0)>;
+	};
+
+	DIE_NODE(ps_atc0_common): power-controller@228 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc1_common): power-controller@230 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc2_common): power-controller@238 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc3_common): power-controller@240 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_dispext1_sys): power-controller@248 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_sys);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>;
+	};
+
+	DIE_NODE(ps_pms_bridge): power-controller@250 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_bridge);
+		apple,always-on; /* Core device */
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext0_sys): power-controller@258 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_sys);
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_ane_sys): power-controller@260 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys);
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+	};
+
+	DIE_NODE(ps_avd_sys): power-controller@268 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(avd_sys);
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+	};
+
+	DIE_NODE(ps_atc0_cio): power-controller@270 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc0_pcie): power-controller@278 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_cio): power-controller@280 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc1_pcie): power-controller@288 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_cio): power-controller@290 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc2_pcie): power-controller@298 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_cio): power-controller@2a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_atc3_pcie): power-controller@2a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_dispext1_fe): power-controller@2b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_fe);
+		power-domains = <&DIE_NODE(ps_dispext1_sys)>;
+	};
+
+	DIE_NODE(ps_dispext1_cpu0): power-controller@2b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext1_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_dispext0_fe): power-controller@2c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_fe);
+		power-domains = <&DIE_NODE(ps_dispext0_sys)>;
+	};
+
+	DIE_NODE(ps_pmp): power-controller@2c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmp);
+	};
+
+	DIE_NODE(ps_pms_sram): power-controller@2d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_sram);
+	};
+
+	DIE_NODE(ps_dispext0_cpu0): power-controller@2d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext0_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_ane_cpu): power-controller@2e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_cpu);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_pcie): power-controller@2e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_usb): power-controller@2f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_pcie): power-controller@2f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_usb): power-controller@300 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_pcie): power-controller@308 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_usb): power-controller@310 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_pcie): power-controller@318 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_usb): power-controller@320 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_trace_fab): power-controller@390 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(trace_fab);
+	};
+
+	DIE_NODE(ps_ane_sys_mpm): power-controller@4000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys_mpm);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+	DIE_NODE(ps_ane_td): power-controller@4008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_td);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+	DIE_NODE(ps_ane_base): power-controller@4010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_base);
+		power-domains = <&DIE_NODE(ps_ane_td)>;
+	};
+
+	DIE_NODE(ps_ane_set1): power-controller@4018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set1);
+		power-domains = <&DIE_NODE(ps_ane_base)>;
+	};
+
+	DIE_NODE(ps_ane_set2): power-controller@4020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set2);
+		power-domains = <&DIE_NODE(ps_ane_set1)>;
+	};
+
+	DIE_NODE(ps_ane_set3): power-controller@4028 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set3);
+		power-domains = <&DIE_NODE(ps_ane_set2)>;
+	};
+
+	DIE_NODE(ps_ane_set4): power-controller@4030 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set4);
+		power-domains = <&DIE_NODE(ps_ane_set3)>;
+	};
+};
+
+&DIE_NODE(pmgr_south) {
+	DIE_NODE(ps_amcc4): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc4);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc5): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc5);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc6): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc6);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc7): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc7);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_dcs_16): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_16);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_17): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_17);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_18): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_18);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_19): power-controller@138 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_19);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_20): power-controller@140 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_20);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_21): power-controller@148 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_21);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_22): power-controller@150 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_22);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_23): power-controller@158 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_23);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_24): power-controller@160 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_24);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_25): power-controller@168 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_25);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_26): power-controller@170 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_26);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_27): power-controller@178 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_27);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_28): power-controller@180 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_28);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_29): power-controller@188 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_29);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_30): power-controller@190 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_30);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_31): power-controller@198 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_31);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afnc4_ioa): power-controller@1a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc4_ls): power-controller@1a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc4_lw0): power-controller@1b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ls)>;
+	};
+
+	DIE_NODE(ps_afnc5_ioa): power-controller@1b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc5_ls): power-controller@1c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc5_lw0): power-controller@1c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ls)>;
+	};
+
+	DIE_NODE(ps_dispext2_sys): power-controller@1d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_sys);
+	};
+
+	DIE_NODE(ps_msr1): power-controller@1d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1);
+	};
+
+	DIE_NODE(ps_dispext2_fe): power-controller@1e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_fe);
+		power-domains = <&DIE_NODE(ps_dispext2_sys)>;
+	};
+
+	DIE_NODE(ps_dispext2_cpu0): power-controller@1e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext2_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_msr1_ase_core): power-controller@1f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1_ase_core);
+		power-domains = <&DIE_NODE(ps_msr1)>;
+	};
+
+	DIE_NODE(ps_dispext3_sys): power-controller@220 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_sys);
+	};
+
+	DIE_NODE(ps_venc1_sys): power-controller@228 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_sys);
+	};
+
+	DIE_NODE(ps_dispext3_fe): power-controller@230 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_fe);
+		power-domains = <&DIE_NODE(ps_dispext3_sys)>;
+	};
+
+	DIE_NODE(ps_dispext3_cpu0): power-controller@238 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext3_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_venc1_dma): power-controller@4000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_dma);
+		power-domains = <&DIE_NODE(ps_venc1_sys)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe4): power-controller@4008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe4);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe5): power-controller@4010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe5);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_me0): power-controller@4018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me0);
+		power-domains = <&DIE_NODE(ps_venc1_pipe5)>, <&DIE_NODE(ps_venc1_pipe4)>;
+	};
+
+	DIE_NODE(ps_venc1_me1): power-controller@4020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me1);
+		power-domains = <&DIE_NODE(ps_venc1_me0)>;
+	};
+};
+
+&DIE_NODE(pmgr_east) {
+	DIE_NODE(ps_clvr_spmi0): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi0);
+		apple,always-on; /* PCPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi1): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi1);
+		apple,always-on; /* GPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi2): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi2);
+		apple,always-on; /* ANE, fabric, AFR voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi3): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi3);
+		apple,always-on; /* Additional voltage regulator, probably used on T6021 (SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi4): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi4);
+		apple,always-on; /* Additional voltage regulator, probably used on T6021 (SMC) */
+	};
+
+	DIE_NODE(ps_ispsens0): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens0);
+	};
+
+	DIE_NODE(ps_ispsens1): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens1);
+	};
+
+	DIE_NODE(ps_ispsens2): power-controller@138 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens2);
+	};
+
+	DIE_NODE(ps_ispsens3): power-controller@140 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens3);
+	};
+
+	DIE_NODE(ps_afnc6_ioa): power-controller@148 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc6_ioa);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc6_ls): power-controller@150 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc6_ls);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc6_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc6_lw0): power-controller@158 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc6_lw0);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc6_ls)>;
+	};
+
+	DIE_NODE(ps_afnc2_ioa): power-controller@160 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ioa);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_dcs_10)>;
+	};
+
+	DIE_NODE(ps_afnc2_ls): power-controller@168 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ls);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc2_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw0): power-controller@170 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw0);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw1): power-controller@178 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw1);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc3_ioa): power-controller@180 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ioa);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc3_ls): power-controller@188 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ls);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc3_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc3_lw0): power-controller@190 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_lw0);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc3_ls)>;
+	};
+
+	DIE_NODE(ps_apcie_gp): power-controller@198 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp);
+		power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+	};
+
+	DIE_NODE(ps_apcie_st): power-controller@1a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st);
+		power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+	};
+
+	DIE_NODE(ps_ans2): power-controller@1a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ans2);
+		power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+	};
+
+	DIE_NODE(ps_disp0_sys): power-controller@1b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_sys);
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+	};
+
+	DIE_NODE(ps_jpg): power-controller@1b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(jpg);
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+	};
+
+	DIE_NODE(ps_sio): power-controller@1c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_isp_sys): power-controller@1c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_sys);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+		status = "disabled";
+	};
+
+	DIE_NODE(ps_disp0_fe): power-controller@1d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_fe);
+		power-domains = <&DIE_NODE(ps_disp0_sys)>;
+	};
+
+	DIE_NODE(ps_disp0_cpu0): power-controller@1d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_cpu0);
+		power-domains = <&DIE_NODE(ps_disp0_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_sio_cpu): power-controller@1e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_cpu);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm0): power-controller@1e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm1): power-controller@1f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm2): power-controller@1f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c0): power-controller@200 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c1): power-controller@208 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c2): power-controller@210 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c3): power-controller@218 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c3);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c4): power-controller@220 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c4);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c5): power-controller@228 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c5);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c6): power-controller@230 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c6);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c7): power-controller@238 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c7);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c8): power-controller@240 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c8);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi_p): power-controller@248 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi0): power-controller@250 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi1): power-controller@258 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi2): power-controller@260 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_p): power-controller@268 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_audio_p): power-controller@270 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(audio_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_adma): power-controller@278 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_adma);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_aes): power-controller@280 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aes);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_dptx_phy_ps): power-controller@288 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dptx_phy_ps);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi0): power-controller@2d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi0);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi1): power-controller@2e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi1);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi2): power-controller@2e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi2);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi3): power-controller@2f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi3);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi4): power-controller@2f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi4);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi5): power-controller@300 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi5);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_uart_n): power-controller@308 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_n);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart0): power-controller@310 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart0);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_amcc1): power-controller@318 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc1);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc3): power-controller@320 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc3);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_dcs_04): power-controller@328 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_04);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_05): power-controller@330 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_05);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_06): power-controller@338 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_06);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_07): power-controller@340 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_07);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_12): power-controller@348 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_12);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_13): power-controller@350 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_13);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_14): power-controller@358 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_14);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_15): power-controller@360 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_15);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_uart1): power-controller@368 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart1);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart2): power-controller@370 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart2);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart3): power-controller@378 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart3);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart4): power-controller@380 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart4);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart5): power-controller@388 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart5);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart6): power-controller@390 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart6);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_mca0): power-controller@398 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca0);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca1): power-controller@3a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca1);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca2): power-controller@3a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca2);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca3): power-controller@3b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca3);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_dpa0): power-controller@3b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa0);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa1): power-controller@3c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa1);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa2): power-controller@3c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa2);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa3): power-controller@3d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa3);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_msr0): power-controller@3d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0);
+	};
+
+	DIE_NODE(ps_venc_sys): power-controller@3e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_sys);
+	};
+
+	DIE_NODE(ps_dpa4): power-controller@3e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa4);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_msr0_ase_core): power-controller@3f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0_ase_core);
+		power-domains = <&DIE_NODE(ps_msr0)>;
+	};
+
+	DIE_NODE(ps_apcie_gpshr_sys): power-controller@3f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gpshr_sys);
+		power-domains = <&DIE_NODE(ps_apcie_gp)>;
+	};
+
+	DIE_NODE(ps_apcie_st_sys): power-controller@408 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x408 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_apcie_st1_sys): power-controller@410 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x410 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st1_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st_sys)>;
+	};
+
+	DIE_NODE(ps_apcie_gp_sys): power-controller@418 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x418 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp_sys);
+		power-domains = <&DIE_NODE(ps_apcie_gpshr_sys)>;
+		apple,always-on; /* Breaks things if shut down */
+	};
+
+	DIE_NODE(ps_apcie_ge_sys): power-controller@420 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x420 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_ge_sys);
+		power-domains = <&DIE_NODE(ps_apcie_gpshr_sys)>;
+	};
+
+	DIE_NODE(ps_apcie_phy_sw): power-controller@428 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x428 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_phy_sw);
+		apple,always-on; /* macOS does not turn this off */
+	};
+
+	DIE_NODE(ps_sep): power-controller@c00 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sep);
+		apple,always-on; /* Locked on */
+	};
+
+	/* There is a dependency tree involved with these PDs,
+	 * but we do not express it here since the ISP driver
+	 * is supposed to sequence them in the right order anyway.
+	 *
+	 * This also works around spurious parent PD activation
+	 * on machines with ISP disabled (desktops), so we don't
+	 * have to enable/disable everything in the per-model DTs.
+	 */
+	DIE_NODE(ps_isp_cpu): power-controller@4000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_cpu);
+		/* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+	};
+
+	DIE_NODE(ps_isp_fe): power-controller@4008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_fe);
+		/* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+	};
+
+	DIE_NODE(ps_dprx): power-controller@4010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dprx);
+		/* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+	};
+
+	DIE_NODE(ps_isp_vis): power-controller@4018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_vis);
+		/* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+	};
+
+	DIE_NODE(ps_isp_be): power-controller@4020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_be);
+		/* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+	};
+
+	DIE_NODE(ps_isp_raw): power-controller@4028 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_raw);
+		/* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+	};
+
+	DIE_NODE(ps_isp_clr): power-controller@4030 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_clr);
+		/* power-domains = <&DIE_NODE(ps_isp_be)>; */
+	};
+
+	DIE_NODE(ps_venc_dma): power-controller@8000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_dma);
+		power-domains = <&DIE_NODE(ps_venc_sys)>;
+	};
+
+	DIE_NODE(ps_venc_pipe4): power-controller@8008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe4);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_pipe5): power-controller@8010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe5);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_me0): power-controller@8018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me0);
+		power-domains = <&DIE_NODE(ps_venc_pipe5)>, <&DIE_NODE(ps_venc_pipe4)>;
+	};
+
+	DIE_NODE(ps_venc_me1): power-controller@8020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me1);
+		power-domains = <&DIE_NODE(ps_venc_me0)>;
+	};
+
+	DIE_NODE(ps_prores): power-controller@c000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(prores);
+		power-domains = <&DIE_NODE(ps_afnc3_lw0)>;
+	};
+};
+
+&DIE_NODE(pmgr_mini) {
+	DIE_NODE(ps_debug): power-controller@58 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi0): power-controller@60 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi0);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi1): power-controller@68 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi1);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_aon): power-controller@70 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_aon);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_msg): power-controller@78 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msg);
+		apple,always-on; /* Core AON device? */
+	};
+
+	DIE_NODE(ps_nub_gpio): power-controller@80 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_gpio);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_fabric): power-controller@88 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_fabric);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_atc0_usb_aon): power-controller@90 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc1_usb_aon): power-controller@98 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc2_usb_aon): power-controller@a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc3_usb_aon): power-controller@a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_mtp_fabric): power-controller@b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_fabric);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_nub_fabric)>;
+		status = "disabled";
+	};
+
+	DIE_NODE(ps_nub_sram): power-controller@b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_sram);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_debug_switch): power-controller@c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_switch);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_atc0_usb): power-controller@c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_usb): power-controller@d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xd0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_usb): power-controller@d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xd8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_usb): power-controller@e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xe0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+#if 0
+	/* MTP stuff is self-managed */
+	DIE_NODE(ps_mtp_gpio): power-controller@e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xe8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_gpio);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_base): power-controller@f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xf0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_base);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_periph): power-controller@f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xf8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_periph);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_spi0): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_spi0);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_i2cm0): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_i2cm0);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_uart0): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_uart0);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_cpu): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_cpu);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_scm_fabric): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_scm_fabric);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_periph)>;
+	};
+
+	DIE_NODE(ps_mtp_sram): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_sram);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_scm_fabric)>, <&DIE_NODE(ps_mtp_cpu)>;
+	};
+
+	DIE_NODE(ps_mtp_dma): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_dma);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_sram)>;
+	};
+#endif
+};
+
+&DIE_NODE(pmgr_gfx) {
+	DIE_NODE(ps_gpx): power-controller@0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gpx);
+		apple,min-state = <4>;
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_afr): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afr);
+		/* Apple Fabric, media stuff: this can power down */
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_gfx): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gfx);
+		power-domains = <&DIE_NODE(ps_afr)>, <&DIE_NODE(ps_gpx)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-6.dtsi b/arch/arm64/boot/dts/apple/t7000-6.dtsi
new file mode 100644
index 000000000000..7048d7383982
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-6.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6 / 6 Plus common device tree
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/input/input.h>
+#include "t7000.dtsi"
+#include "t7000-common.dtsi"
+#include "t7000-handheld.dtsi"
+
+/ {
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 32 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 33 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 45 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 46 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl 131 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
+
+&typhoon_opp06 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-common.dtsi b/arch/arm64/boot/dts/apple/t7000-common.dtsi
new file mode 100644
index 000000000000..87146e6daae7
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-common.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple TV HD, iPhone 6, iPhone 6 Plus, iPad mini 4, iPod touch 6
+ *
+ * This file contains parts common to all Apple A8 devices.
+ *
+ * target-type: J42d, J96, J97, N56, N61, N102
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		serial6 = &serial6;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-handheld.dtsi b/arch/arm64/boot/dts/apple/t7000-handheld.dtsi
new file mode 100644
index 000000000000..7b58aa648b53
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-handheld.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6, iPhone 6 Plus, iPad mini 4, iPod touch 6
+ *
+ * This file contains the parts common to handheld devices with t7000
+ *
+ * target-type: J96, J97, N56, N61, N102
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+};
+
+&dwi_bl {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-j42d.dts b/arch/arm64/boot/dts/apple/t7000-j42d.dts
new file mode 100644
index 000000000000..2ec9e06cc63f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-j42d.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple TV HD, J42d, AppleTV5,3 (A1625)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7000.dtsi"
+#include "t7000-common.dtsi"
+
+/ {
+	compatible = "apple,j42d", "apple,t7000", "apple,arm-platform";
+	model = "Apple TV HD";
+	chassis-type = "television";
+
+	chosen {
+		stdout-path = "serial6";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0 &ps_dp>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+};
+
+&serial6 {
+	status = "okay";
+};
+
+&typhoon_opp06 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-j96.dts b/arch/arm64/boot/dts/apple/t7000-j96.dts
new file mode 100644
index 000000000000..8a32a50cc2df
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-j96.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 4 (Wi-Fi), J96, iPad5,1 (A1538)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7000-mini4.dtsi"
+
+/ {
+	compatible = "apple,j96", "apple,t7000", "apple,arm-platform";
+	model = "Apple iPad mini 4 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-j97.dts b/arch/arm64/boot/dts/apple/t7000-j97.dts
new file mode 100644
index 000000000000..ac7d501f88d2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-j97.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 4 (Cellular), J97, iPad5,2 (A1550)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7000-mini4.dtsi"
+
+/ {
+	compatible = "apple,j97", "apple,t7000", "apple,arm-platform";
+	model = "Apple iPad mini 4 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-mini4.dtsi b/arch/arm64/boot/dts/apple/t7000-mini4.dtsi
new file mode 100644
index 000000000000..cc235c5a0c43
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-mini4.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 4 common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "t7000.dtsi"
+#include "t7000-common.dtsi"
+#include "t7000-handheld.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 32 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 33 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 45 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 46 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl 36 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
+
+&typhoon_opp06 {
+	status = "okay";
+};
+
+&typhoon_opp07 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-n102.dts b/arch/arm64/boot/dts/apple/t7000-n102.dts
new file mode 100644
index 000000000000..99eb8a2b8c73
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-n102.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPod touch 6, N102, iPod7,1 (A1574)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7000.dtsi"
+#include "t7000-common.dtsi"
+#include "t7000-handheld.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "apple,n102", "apple,t7000", "apple,arm-platform";
+	model = "Apple iPod touch 6";
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 32 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 33 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 46 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 45 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-n56.dts b/arch/arm64/boot/dts/apple/t7000-n56.dts
new file mode 100644
index 000000000000..2c358df14458
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-n56.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6 Plus, N56, iPhone7,2 (A1549/A1586/A1589)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7000-6.dtsi"
+
+/ {
+	compatible = "apple,n56", "apple,t7000", "apple,arm-platform";
+	model = "Apple iPhone 6 Plus";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-n61.dts b/arch/arm64/boot/dts/apple/t7000-n61.dts
new file mode 100644
index 000000000000..10b4ca8babf7
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-n61.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6, N61, iPhone7,2 (A1549/A1586/A1589)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7000-6.dtsi"
+
+/ {
+	compatible = "apple,n61", "apple,t7000", "apple,arm-platform";
+	model = "Apple iPhone 6";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-pmgr.dtsi b/arch/arm64/boot/dts/apple/t7000-pmgr.dtsi
new file mode 100644
index 000000000000..5948fa7afffc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-pmgr.dtsi
@@ -0,0 +1,641 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T7000 "A8" SoC
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+&pmgr {
+	ps_cpu0: power-controller@20000 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@20008 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@20040 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_p: power-controller@201f8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+	};
+
+	ps_lio: power-controller@20100 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "lio";
+		apple,always-on; /* Core device */
+	};
+
+	ps_iomux: power-controller@20108 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "iomux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@20110 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_debug: power-controller@20118 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_dwi: power-controller@20120 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@20128 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_mca0: power-controller@20130 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@20138 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@20140 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@20148 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@20150 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@20158 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@20160 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@20168 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@20170 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@20178 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@20180 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@20188 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@20190 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@20198 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@201a0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@201a8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@201b0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@201b8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@201c0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@201c8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@201d0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@201d8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@201e0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@201e8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@201f0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb: power-controller@20248 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@20250 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@20258 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@20268 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@20278 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_disp_busmux: power-controller@202a8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp_busmux";
+	};
+
+	ps_media: power-controller@202d8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@202d0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+	};
+
+	ps_msr: power-controller@202e0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@202e8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@202b0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_disp1: power-controller@202c8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_pcie_ref: power-controller@20220 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_hsic0_phy: power-controller@20200 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_hsic1_phy: power-controller@20208 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_ispsens0: power-controller@20210 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@20218 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_mcc: power-controller@20230 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_mcu: power-controller@20238 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcu";
+		apple,always-on; /* Core device */
+	};
+
+	ps_amp: power-controller@20240 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "amp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb2host0_ohci: power-controller@20260 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@20288 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@20290 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple Fabric, critical block */
+	};
+
+	ps_sf: power-controller@20298 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple Fabric, critical block */
+	};
+
+	ps_cp: power-controller@202a0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_mipi_dsi: power-controller@202b8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_dp: power-controller@202c0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_vdec: power-controller@202f0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_ans: power-controller@20318 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+	};
+
+	ps_venc: power-controller@20300 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@20308 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@20310 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_gfx: power-controller@20320 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@20400 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_venc_pipe: power-controller@21000 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@21008 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me1: power-controller@21010 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+		power-domains = <&ps_venc>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t7000.dtsi b/arch/arm64/boot/dts/apple/t7000.dtsi
new file mode 100644
index 000000000000..0342455d3444
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000.dtsi
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T7000 "A8" SoC
+ *
+ * Other names: H7P, "Fiji"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ * Based on Asahi Linux's M1 (t8103.dtsi) and Corellium's A10 efforts.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,typhoon";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,typhoon";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+		};
+	};
+
+	typhoon_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <300>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <50000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <29000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <4>;
+			clock-latency-ns = <29000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <5>;
+			clock-latency-ns = <36000>;
+		};
+		typhoon_opp06: opp06 {
+			opp-hz = /bits/ 64 <1392000000>;
+			opp-level = <6>;
+			clock-latency-ns = <42000>;
+			status = "disabled"; /* Not available on N102 */
+		};
+		typhoon_opp07: opp07 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <7>;
+			clock-latency-ns = <49000>;
+			status = "disabled"; /* J96 and J97 only */
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,t7000-cluster-cpufreq", "apple,s5l8960x-cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 158 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		serial6: serial@20a0d8000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0d8000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 164 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart6>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 174 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 175 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 176 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t7000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x24000>;
+		};
+
+		wdt: watchdog@20e027000 {
+			compatible = "apple,t7000-wdt", "apple,wdt";
+			reg = <0x2 0x0e027000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,t7000-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200010 {
+			compatible = "apple,t7000-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200010 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@20e300000 {
+			compatible = "apple,t7000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0e300000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 208>;
+			apple,npins = <208>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 68 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(97, 1)>,
+					 <APPLE_PINMUX(96, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(139, 1)>,
+					 <APPLE_PINMUX(138, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(65, 1)>,
+					 <APPLE_PINMUX(64, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(87, 1)>,
+					 <APPLE_PINMUX(86, 1)>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A8 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "t7000-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t7001-air2.dtsi b/arch/arm64/boot/dts/apple/t7001-air2.dtsi
new file mode 100644
index 000000000000..e4ec8c1977de
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001-air2.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air 2 common device tree
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "t7001.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0 &ps_dp>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 92 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 93 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7001-j81.dts b/arch/arm64/boot/dts/apple/t7001-j81.dts
new file mode 100644
index 000000000000..ca90dc0c872c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001-j81.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air 2 (Wi-Fi), J81, iPad5,3 (A1566)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7001-air2.dtsi"
+
+/ {
+	compatible = "apple,j81", "apple,t7001", "apple,arm-platform";
+	model = "Apple iPad Air 2 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/t7001-j82.dts b/arch/arm64/boot/dts/apple/t7001-j82.dts
new file mode 100644
index 000000000000..d9fd16f48db7
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001-j82.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air 2 (Cellular), J82, iPad5,4 (A1567)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7001-air2.dtsi"
+
+/ {
+	compatible = "apple,j82", "apple,t7001", "apple,arm-platform";
+	model = "Apple iPad Air 2 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/t7001-pmgr.dtsi b/arch/arm64/boot/dts/apple/t7001-pmgr.dtsi
new file mode 100644
index 000000000000..7321cfdcd189
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001-pmgr.dtsi
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T7001 "A8X" SoC
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@20000 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@20008 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu2: power-controller@20010 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu2";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@20040 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_p: power-controller@201f8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+	};
+
+	ps_lio: power-controller@20100 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "lio";
+		apple,always-on; /* Core device */
+	};
+
+	ps_iomux: power-controller@20108 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "iomux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@20110 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_debug: power-controller@20118 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_dwi: power-controller@20120 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@20128 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_mca0: power-controller@20130 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@20138 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@20140 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@20148 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@20150 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@20158 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@20160 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@20168 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@20170 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@20178 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@20180 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@20188 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@20190 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@20198 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@201a0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@201a8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@201b0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@201b8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@201c0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@201c8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@201d0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@201d8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@201e0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@201e8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@201f0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb: power-controller@20248 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@20250 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@20258 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@20268 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@20278 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_disp_busmux: power-controller@202a8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp_busmux";
+	};
+
+	ps_disp1_busmux: power-controller@202c0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1_busmux";
+	};
+
+	ps_media: power-controller@202d8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@202d0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+	};
+
+	ps_msr: power-controller@202e0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@202e8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@202b0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_disp1: power-controller@202c8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp1_busmux>;
+	};
+
+	ps_pcie_ref: power-controller@20220 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_hsic0_phy: power-controller@20200 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_hsic1_phy: power-controller@20208 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_ispsens0: power-controller@20210 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@20218 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_mcc: power-controller@20230 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_mcu: power-controller@20238 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcu";
+		apple,always-on; /* Core device */
+	};
+
+	ps_amp: power-controller@20240 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "amp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb2host0_ohci: power-controller@20260 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@20288 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@20290 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@20298 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_cp: power-controller@202a0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dp: power-controller@202b8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_vdec: power-controller@202f0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_ans: power-controller@20318 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+	};
+
+	ps_venc: power-controller@20300 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@20308 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@20310 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_gfx: power-controller@20320 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@20400 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_venc_pipe: power-controller@21000 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@21008 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me1: power-controller@21010 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+		power-domains = <&ps_venc>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t7001.dtsi b/arch/arm64/boot/dts/apple/t7001.dtsi
new file mode 100644
index 000000000000..e1afb0542369
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001.dtsi
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T7001 "A8X" SoC
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ * Based on Asahi Linux's M1 (t8103.dtsi) and Corellium's A10 efforts.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial0;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,typhoon";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,typhoon";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "apple,typhoon";
+			reg = <0x0 0x2>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x200000>;
+		};
+	};
+
+	typhoon_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <300>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <49000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <31000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <4>;
+			clock-latency-ns = <32000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <5>;
+			clock-latency-ns = <32000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1392000000>;
+			opp-level = <6>;
+			clock-latency-ns = <37000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <7>;
+			clock-latency-ns = <41000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,t7000-cluster-cpufreq", "apple,s5l8960x-cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 158 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 174 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 175 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 176 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t7000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x24000>;
+		};
+
+		wdt: watchdog@20e027000 {
+			compatible = "apple,t7000-wdt", "apple,wdt";
+			reg = <0x2 0x0e027000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,t7000-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		pinctrl: pinctrl@20e300000 {
+			compatible = "apple,t7000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0e300000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 184>;
+			apple,npins = <184>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 68 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(38, 1)>,
+					 <APPLE_PINMUX(37, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(66, 1)>,
+					 <APPLE_PINMUX(65, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(133, 1)>,
+					 <APPLE_PINMUX(132, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(135, 1)>,
+					 <APPLE_PINMUX(134, 1)>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A8X doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "t7001-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8010-7.dtsi b/arch/arm64/boot/dts/apple/t8010-7.dtsi
new file mode 100644
index 000000000000..1913b7b2c1fe
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-7.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 7 / 7 Plus common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "t8010.dtsi"
+#include "t8010-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 179 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 180 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl_ap 86 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0_fe &ps_disp0_be &ps_mipi_dsi>;
+};
+
+&hurricane_opp09 {
+	status = "okay";
+};
+
+&hurricane_opp10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-common.dtsi b/arch/arm64/boot/dts/apple/t8010-common.dtsi
new file mode 100644
index 000000000000..44dc968638b1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-common.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Apple iPhone 7, iPhone 7 Plus, iPad 6, iPad 7, iPod touch 7
+ *
+ * This file contains parts common to all Apple A10 devices.
+ *
+ * target-type: D10, D11, D101, D111, J71b, J72b, J171, J172, N112
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&dwi_bl {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-d10.dts b/arch/arm64/boot/dts/apple/t8010-d10.dts
new file mode 100644
index 000000000000..39cdd12db6bf
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-d10.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 7 (Qualcomm), D10, iPhone9,1 (A1660/A1778/A1779/A1780)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-7.dtsi"
+
+/ {
+	compatible = "apple,d10", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPhone 7 (Qualcomm)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-d101.dts b/arch/arm64/boot/dts/apple/t8010-d101.dts
new file mode 100644
index 000000000000..6a9f0856f930
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-d101.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 7 (Intel), D101, iPhone9,3 (A1660/A1778/A1779/A1780)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-7.dtsi"
+
+/ {
+	compatible = "apple,d101", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPhone 7 (Intel)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-d11.dts b/arch/arm64/boot/dts/apple/t8010-d11.dts
new file mode 100644
index 000000000000..57e41c2cfbe2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-d11.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 7 Plus (Qualcomm), D11, iPhone9,2 (A1661/A1784/A1785/A1786)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-7.dtsi"
+
+/ {
+	compatible = "apple,d11", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPhone 7 Plus (Qualcomm)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-d111.dts b/arch/arm64/boot/dts/apple/t8010-d111.dts
new file mode 100644
index 000000000000..37e395a48c1d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-d111.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 7 Plus (Intel), D111, iPhone9,4 (A1661/A1784/A1785/A1786)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-7.dtsi"
+
+/ {
+	compatible = "apple,d111", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPhone 7 Plus (Intel)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi b/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi
new file mode 100644
index 000000000000..1e46e4a3a7f4
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 6 common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "t8010.dtsi"
+#include "t8010-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 180 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 179 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 89 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 90 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0_fe &ps_disp0_be &ps_dp>;
+};
+
+&hurricane_opp09 {
+	status = "okay";
+};
+
+&hurricane_opp10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-ipad7.dtsi b/arch/arm64/boot/dts/apple/t8010-ipad7.dtsi
new file mode 100644
index 000000000000..bd0e9c0b5696
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-ipad7.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 7 common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/*
+ * The iPad 7 seems to be only an iteration over the iPad 6 with some
+ * small changes, like the a bigger screen and 1 GiB of RAM more, hence
+ * there is little to no differentiation between these 2 generations for
+ * now.
+ */
+#include "t8010-ipad6.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8010-j171.dts b/arch/arm64/boot/dts/apple/t8010-j171.dts
new file mode 100644
index 000000000000..6751bf3a4afd
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-j171.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 7 (Wi-Fi), J171, iPad7,11 (A2197)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-ipad7.dtsi"
+
+/ {
+	compatible = "apple,j171", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPad 7 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-j172.dts b/arch/arm64/boot/dts/apple/t8010-j172.dts
new file mode 100644
index 000000000000..51aaa950acd9
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-j172.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 7 (Cellular), J172, iPad7,12 (A2198/A2200)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-ipad7.dtsi"
+
+/ {
+	compatible = "apple,j172", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPad 7 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-j71b.dts b/arch/arm64/boot/dts/apple/t8010-j71b.dts
new file mode 100644
index 000000000000..534eb8413e08
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-j71b.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 6 (Wi-Fi), J71b, iPad7,5 (A1893)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-ipad6.dtsi"
+
+/ {
+	compatible = "apple,j71b", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPad 6 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-j72b.dts b/arch/arm64/boot/dts/apple/t8010-j72b.dts
new file mode 100644
index 000000000000..264924e41f42
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-j72b.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 6 (Cellular), J72b, iPad7,6 (A1954)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-ipad6.dtsi"
+
+/ {
+	compatible = "apple,j72b", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPad 6 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-n112.dts b/arch/arm64/boot/dts/apple/t8010-n112.dts
new file mode 100644
index 000000000000..48fdbedf74da
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-n112.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPod touch 7, N112, iPod9,1 (A2178)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010.dtsi"
+#include "t8010-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "apple,n112", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPod touch 7";
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 86 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 179 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 180 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0_fe &ps_disp0_be &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8010-pmgr.dtsi
new file mode 100644
index 000000000000..6d451088616a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-pmgr.dtsi
@@ -0,0 +1,772 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8010 "A10" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80160 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80168 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pcie_ref: power-controller@80148 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_socuvd: power-controller@80150 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "socuvd";
+	};
+
+	ps_mca0: power-controller@80178 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80180 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80188 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80190 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80198 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@801a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@801a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80170 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_isp_sens0: power-controller@80130 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80138 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_isp_sens2: power-controller@80140 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens2";
+	};
+
+	ps_usb: power-controller@80268 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80270 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80278 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80288 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+	};
+
+	ps_media: power-controller@802d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp_sys: power-controller@802d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@802e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@802e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0_fe: power-controller@802b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_disp0_be: power-controller@802b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be";
+		power-domains = <&ps_disp0_fe>;
+	};
+
+	ps_pmp: power-controller@802f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@802f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_uart3: power-controller@80200 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@80208 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@80210 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@80218 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80220 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80228 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_hfd0: power-controller@80238 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hfd0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80240 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80248 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80250 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80258 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80260 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_usb2host0_ohci: power-controller@80280 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@80290 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@80298 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mipi_dsi: power-controller@802c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_dp: power-controller@802c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_venc_sys: power-controller@80310 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@80318 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@80320 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_vdec0: power-controller@80300 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec0";
+		power-domains = <&ps_media>;
+	};
+
+	ps_gfx: power-controller@80328 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_isp_rsts0: power-controller@84000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts0";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_rsts1: power-controller@84008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts1";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_vis: power-controller@84010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_vis";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_be: power-controller@84018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_be";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_pearl: power-controller@84020 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_pearl";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_dprx: power-controller@84028 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dprx";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@88000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_pipe5: power-controller@88008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_me0: power-controller@88010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_cpu &ps_aop_busif &ps_aop_filter>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+	};
+
+	ps_aop_cpu: power-controller@80048 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80050 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80058 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8010.dtsi b/arch/arm64/boot/dts/apple/t8010.dtsi
new file mode 100644
index 000000000000..522b3896aa87
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010.dtsi
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Apple T8010 "A10" SoC
+ *
+ * Other names: H9P, "Cayman"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>; /* P-cluster */
+		};
+	};
+
+	fusion_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		/*
+		 * Apple Fusion Architecture: Hardware big.LITTLE switcher
+		 * that use p-state transitions to switch between cores.
+		 * Only one type of core can be active at a given time.
+		 *
+		 * The E-core frequencies are adjusted so performance scales
+		 * linearly with reported clock speed.
+		 */
+
+		opp01 {
+			opp-hz = /bits/ 64 <172000000>; /* 300 MHz, E-core */
+			opp-level = <1>;
+			clock-latency-ns = <11000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <230000000>; /* 396 MHz, E-core */
+			opp-level = <2>;
+			clock-latency-ns = <49000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <425000000>; /* 732 MHz, E-core */
+			opp-level = <3>;
+			clock-latency-ns = <13000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <637000000>; /* 1092 MHz, E-core */
+			opp-level = <4>;
+			clock-latency-ns = <18000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <756000000>;
+			opp-level = <5>;
+			clock-latency-ns = <35000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <6>;
+			clock-latency-ns = <31000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1356000000>;
+			opp-level = <7>;
+			clock-latency-ns = <37000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <1644000000>;
+			opp-level = <8>;
+			clock-latency-ns = <39500>;
+		};
+		hurricane_opp09: opp09 {
+			opp-hz = /bits/ 64 <1944000000>;
+			opp-level = <9>;
+			clock-latency-ns = <46000>;
+			status = "disabled"; /* Not available on N112 */
+		};
+		hurricane_opp10: opp10 {
+			opp-hz = /bits/ 64 <2244000000>;
+			opp-level = <10>;
+			clock-latency-ns = <56000>;
+			status = "disabled"; /* Not available on N112 */
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		hurricane_opp11: opp11 {
+			opp-hz = /bits/ 64 <2340000000>;
+			opp-level = <11>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+			status = "disabled"; /* Not available on N112 */
+		};
+#endif
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202f20000 {
+			compatible = "apple,t8010-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02f20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 218 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 234 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 235 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,t8010-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200080 {
+			compatible = "apple,t8010-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200080 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 208>;
+			apple,npins = <208>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(197, 1)>,
+					 <APPLE_PINMUX(196, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(40, 1)>,
+					 <APPLE_PINMUX(39, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(132, 1)>,
+					 <APPLE_PINMUX(133, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(41, 1)>,
+					 <APPLE_PINMUX(42, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 42>;
+			apple,npins = <42>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 134 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2102b0000 {
+			compatible = "apple,t8010-wdt", "apple,wdt";
+			reg = <0x2 0x102b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A10 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "t8010-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8011-common.dtsi b/arch/arm64/boot/dts/apple/t8011-common.dtsi
new file mode 100644
index 000000000000..2010b56246f1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-common.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple TV 4K, Apple iPad Pro 2
+ *
+ * This file contains parts common to all Apple A10X devices.
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0_fe &ps_disp0_be &ps_dp>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-j105a.dts b/arch/arm64/boot/dts/apple/t8011-j105a.dts
new file mode 100644
index 000000000000..d3e5b69c67aa
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-j105a.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple TV 4K (1st Generation), J105a, AppleTV6,2 (A1482)
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8011.dtsi"
+#include "t8011-common.dtsi"
+
+/ {
+	compatible = "apple,j105a", "apple,t8011", "apple,arm-platform";
+	model = "Apple TV 4K (1st Generation)";
+	chassis-type = "television";
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-j120.dts b/arch/arm64/boot/dts/apple/t8011-j120.dts
new file mode 100644
index 000000000000..1b49bb5c97c3
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-j120.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro 2 (12.9-inch) (Wi-Fi), J120, iPad7,1 (A1670)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8011.dtsi"
+#include "t8011-common.dtsi"
+#include "t8011-pro2.dtsi"
+
+/ {
+	compatible = "apple,j120", "apple,t8011", "apple,arm-platform";
+	model = "Apple iPad Pro 2 (12.9-inch) (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-j121.dts b/arch/arm64/boot/dts/apple/t8011-j121.dts
new file mode 100644
index 000000000000..22f4aa1ecbda
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-j121.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro 2 (12.9-inch) (Cellular), J121, iPad7,2 (A1671)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8011.dtsi"
+#include "t8011-common.dtsi"
+#include "t8011-pro2.dtsi"
+
+/ {
+	compatible = "apple,j121", "apple,t8011", "apple,arm-platform";
+	model = "Apple iPad Pro 2 (12.9-inch) (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-j207.dts b/arch/arm64/boot/dts/apple/t8011-j207.dts
new file mode 100644
index 000000000000..c3384e2cad44
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-j207.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro 2 (10.5-inch) (Wi-Fi), J207, iPad7,3 (A1701)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8011.dtsi"
+#include "t8011-common.dtsi"
+#include "t8011-pro2.dtsi"
+
+/ {
+	compatible = "apple,j207", "apple,t8011", "apple,arm-platform";
+	model = "Apple iPad Pro 2 (10.5-inch) (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-j208.dts b/arch/arm64/boot/dts/apple/t8011-j208.dts
new file mode 100644
index 000000000000..251fa76efb6b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-j208.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro 2 (10.5-inch) (Cellular), J208, iPad7,4 (A1709)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8011.dtsi"
+#include "t8011-common.dtsi"
+#include "t8011-pro2.dtsi"
+
+/ {
+	compatible = "apple,j208", "apple,t8011", "apple,arm-platform";
+	model = "Apple iPad Pro 2 (10.5-inch) (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8011-pmgr.dtsi
new file mode 100644
index 000000000000..c44e3f9d7087
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-pmgr.dtsi
@@ -0,0 +1,806 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8011 "A10X" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu2: power-controller@80010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu2";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80158 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80160 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pcie_ref: power-controller@80148 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80170 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80178 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80180 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80188 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80190 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@80198 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@801a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@801f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80168 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb3host>;
+	};
+
+	ps_isp_sens0: power-controller@80130 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80138 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_isp_sens2: power-controller@80140 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens2";
+	};
+
+	ps_usb: power-controller@80288 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80290 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host: power-controller@80298 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2dev: power-controller@802a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2dev";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb3host: power-controller@802a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb3host";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb3dev: power-controller@802b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb3dev";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_media: power-controller@802e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp_sys: power-controller@802e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+	};
+
+	ps_msr: power-controller@802f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@802f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0_fe: power-controller@802c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+	};
+
+	ps_disp0_be: power-controller@802d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be";
+		power-domains = <&ps_disp0_fe>;
+	};
+
+	ps_dpa: power-controller@80230 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@80200 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@80208 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@80210 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80218 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80220 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_hfd0: power-controller@80238 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hfd0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80240 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80248 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80250 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80258 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80260 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs4: power-controller@80268 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs5: power-controller@80270 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs6: power-controller@80278 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+	};
+
+	ps_dcs7: power-controller@80280 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+	};
+
+	ps_smx: power-controller@802b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_dp: power-controller@802d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_venc_sys: power-controller@80320 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_srs: power-controller@80390 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "srs";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pms_sram: power-controller@80308 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_pmp: power-controller@80300 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pcie: power-controller@80328 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@80330 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_vdec0: power-controller@80310 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec0";
+		power-domains = <&ps_media>;
+	};
+
+	ps_gfx: power-controller@80338 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_isp_rsts0: power-controller@84000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts0";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_rsts1: power-controller@84008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts1";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_vis: power-controller@84010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_vis";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_be: power-controller@84018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_be";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_pearl: power-controller@84020 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_pearl";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_dprx: power-controller@84028 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dprx";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@88000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_pipe5: power-controller@88008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_me0: power-controller@88010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_cpu &ps_aop_filter &ps_aop_busif>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+	};
+
+	ps_aop_cpu: power-controller@80048 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80050 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80058 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-pro2.dtsi b/arch/arm64/boot/dts/apple/t8011-pro2.dtsi
new file mode 100644
index 000000000000..5eaa0a73350f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-pro2.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro 2 common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 138 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 43 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 40 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&ps_dcs6 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs7 {
+	apple,always-on; /* LPDDR4 interface */
+};
diff --git a/arch/arm64/boot/dts/apple/t8011.dtsi b/arch/arm64/boot/dts/apple/t8011.dtsi
new file mode 100644
index 000000000000..039aa4d1e887
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011.dtsi
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8011 "A10X" SoC
+ *
+ * Other names: H9G, "Myst"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		cpu2: cpu@2 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x2>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x800000>; /* P-cluster */
+		};
+	};
+
+	fusion_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		/*
+		 * Apple Fusion Architecture: Hardwired big.LITTLE switcher
+		 * that use p-state transitions to switch between cores.
+		 *
+		 * The E-core frequencies are adjusted so performance scales
+		 * linearly with reported clock speed.
+		 */
+
+		opp01 {
+			opp-hz = /bits/ 64 <172000000>; /* 300 MHz, E-core */
+			opp-level = <1>;
+			clock-latency-ns = <12000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <230000000>; /* 396 MHz, E-core */
+			opp-level = <2>;
+			clock-latency-ns = <135000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <448000000>; /* 768 MHz, E-core */
+			opp-level = <3>;
+			clock-latency-ns = <105000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <662000000>; /* 1152 MHz, E-core */
+			opp-level = <4>;
+			clock-latency-ns = <115000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <804000000>;
+			opp-level = <5>;
+			clock-latency-ns = <122000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1140000000>;
+			opp-level = <6>;
+			clock-latency-ns = <120000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1548000000>;
+			opp-level = <7>;
+			clock-latency-ns = <125000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <1956000000>;
+			opp-level = <8>;
+			clock-latency-ns = <135000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2316000000>;
+			opp-level = <9>;
+			clock-latency-ns = <140000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp10 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-level = <10>;
+			clock-latency-ns = <140000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202f20000 {
+			compatible = "apple,t8010-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02f20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 216 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 230 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 231 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,t8010-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 219>;
+			apple,npins = <219>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(211, 1)>,
+					 <APPLE_PINMUX(210, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(156, 1)>,
+					 <APPLE_PINMUX(155, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(58, 1)>,
+					 <APPLE_PINMUX(57, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(158, 1)>,
+					 <APPLE_PINMUX(157, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 42>;
+			apple,npins = <42>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 131 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2102b0000 {
+			compatible = "apple,t8010-wdt", "apple,wdt";
+			reg = <0x2 0x102b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A10X doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "t8011-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8012-j132.dts b/arch/arm64/boot/dts/apple/t8012-j132.dts
new file mode 100644
index 000000000000..7dcac51703ff
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j132.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro15,2 (j132), J132, iBridge2,4
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro15,2 (j132)";
+	compatible = "apple,j132", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j137.dts b/arch/arm64/boot/dts/apple/t8012-j137.dts
new file mode 100644
index 000000000000..dbde1ad7ce14
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j137.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 iMacPro1,1 (j137), J137, iBridge2,1
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 iMacPro1,1 (j137)";
+	compatible = "apple,j137", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j140a.dts b/arch/arm64/boot/dts/apple/t8012-j140a.dts
new file mode 100644
index 000000000000..5df1ff74d2df
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j140a.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookAir8,2 (j140a), J140a, iBridge2,12
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 MacBookAir8,2 (j140a)";
+	compatible = "apple,j140a", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j140k.dts b/arch/arm64/boot/dts/apple/t8012-j140k.dts
new file mode 100644
index 000000000000..a0ef1585e5c2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j140k.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookAir8,1 (j140k), J140k, iBridge2,8
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 MacBookAir8,1 (j140k)";
+	compatible = "apple,j140k", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j152f.dts b/arch/arm64/boot/dts/apple/t8012-j152f.dts
new file mode 100644
index 000000000000..261416eaf97e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j152f.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro16,1 (j152f), J152f, iBridge2,14
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro16,1 (j152f)";
+	compatible = "apple,j152f", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j160.dts b/arch/arm64/boot/dts/apple/t8012-j160.dts
new file mode 100644
index 000000000000..fbcc0604f4a0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j160.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacPro7,1 (j160), J160, iBridge2,6
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 MacPro7,1 (j160)";
+	compatible = "apple,j160", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j174.dts b/arch/arm64/boot/dts/apple/t8012-j174.dts
new file mode 100644
index 000000000000..d11c70f84a71
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j174.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 Macmini8,1 (j174), J174, iBridge2,5
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 Macmini8,1 (j174)";
+	compatible = "apple,j174", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j185.dts b/arch/arm64/boot/dts/apple/t8012-j185.dts
new file mode 100644
index 000000000000..33492f5db46d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j185.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 iMac20,1 (j185), J185, iBridge2,19
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 iMac20,1 (j185)";
+	compatible = "apple,j185", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j185f.dts b/arch/arm64/boot/dts/apple/t8012-j185f.dts
new file mode 100644
index 000000000000..3a4abdd8f7d7
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j185f.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 iMac20,2 (j185f), J185f, iBridge2,20
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 iMac20,2 (j185f)";
+	compatible = "apple,j185f", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j213.dts b/arch/arm64/boot/dts/apple/t8012-j213.dts
new file mode 100644
index 000000000000..8270812b9a68
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j213.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro15,4 (j213), J213, iBridge2,10
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro15,4 (j213)";
+	compatible = "apple,j213", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j214k.dts b/arch/arm64/boot/dts/apple/t8012-j214k.dts
new file mode 100644
index 000000000000..5b8e42512060
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j214k.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro16,2 (j214k), J214k, iBridge2,16
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro16,2 (j214k)";
+	compatible = "apple,j214k", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j215.dts b/arch/arm64/boot/dts/apple/t8012-j215.dts
new file mode 100644
index 000000000000..ad574fbf7f92
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j215.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro16,4 (j215), J215, iBridge2,22
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro16,4 (j215)";
+	compatible = "apple,j215", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j223.dts b/arch/arm64/boot/dts/apple/t8012-j223.dts
new file mode 100644
index 000000000000..de75d775aac5
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j223.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro16,3 (j223), J223, iBridge2,21
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro16,3 (j223)";
+	compatible = "apple,j223", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j230k.dts b/arch/arm64/boot/dts/apple/t8012-j230k.dts
new file mode 100644
index 000000000000..4b19bc70ab0f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j230k.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookAir9,1 (j230k), J230k, iBridge2,15
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 MacBookAir9,1 (j230k)";
+	compatible = "apple,j230k", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j680.dts b/arch/arm64/boot/dts/apple/t8012-j680.dts
new file mode 100644
index 000000000000..aa5a72e07d3f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j680.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro15,1 (j680), J680, iBridge2,3
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro15,1 (j680)";
+	compatible = "apple,j680", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j780.dts b/arch/arm64/boot/dts/apple/t8012-j780.dts
new file mode 100644
index 000000000000..9cee891cb16d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j780.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro15,3 (j780), J780, iBridge2,7
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro15,3 (j780)";
+	compatible = "apple,j780", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8012-jxxx.dtsi
new file mode 100644
index 000000000000..36e82633bc52
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-jxxx.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Common Device Tree for all T2 devices
+ *
+ * target-type: J132, J137, J140a, J140k, J152f, J160, J174, J185, J185f
+ * J213, J214k, J215, J223, J230k, J680, J780
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+#include "t8012.dtsi"
+
+/ {
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8012-pmgr.dtsi
new file mode 100644
index 000000000000..35a462edd4af
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-pmgr.dtsi
@@ -0,0 +1,837 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8012 "T2" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80158 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80160 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_iomux: power-controller@80150 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "iomux";
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_gpio: power-controller@80110 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pcie_down_ref: power-controller@80138 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_down_ref";
+	};
+
+	ps_pcie_stg0_ref: power-controller@80140 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg0_ref";
+	};
+
+	ps_pcie_stg1_ref: power-controller@80148 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg1_ref";
+	};
+
+	ps_mca0: power-controller@80170 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80178 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80180 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80188 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80190 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca5: power-controller@80198 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@801a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@801a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80168 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_isp_sens0: power-controller@80120 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80128 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_isp_sens2: power-controller@80130 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens2";
+	};
+
+	ps_pms: power-controller@80118 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_i2c4: power-controller@801c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c5: power-controller@801d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c6: power-controller@801d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_usb: power-controller@80268 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80270 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80278 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80288 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+	};
+
+	ps_media: power-controller@802d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp_sys: power-controller@802d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@802e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@802e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0_fe: power-controller@802b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_disp0_be: power-controller@802b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be";
+		power-domains = <&ps_disp0_fe>;
+	};
+
+	ps_uart0: power-controller@80200 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@80208 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@80210 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@80218 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@80220 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_dpa: power-controller@80228 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_hfd0: power-controller@80230 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hfd0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80240 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80248 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80250 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80258 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		/* Not used on some devicecs, to be disabled by loader */
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80260 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		/* Not used on some devicecs, to be disabled by loader */
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_usb2host0_ohci: power-controller@80280 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@80290 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@80298 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mipi_dsi: power-controller@802c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_pmp: power-controller@802f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@802f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_pcie_up_af: power-controller@80320 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_up_af";
+		power-domains = <&ps_iomux>;
+	};
+
+	ps_pcie_up: power-controller@80328 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_up";
+		power-domains = <&ps_pcie_up_af>;
+	};
+
+	ps_venc_sys: power-controller@80300 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_ans2: power-controller@80308 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans2";
+		power-domains = <&ps_iomux>;
+	};
+
+	ps_pcie_down: power-controller@80310 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_down";
+		power-domains = <&ps_iomux>;
+	};
+
+	ps_pcie_down_aux: power-controller@80318 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_down_aux";
+	};
+
+	ps_pcie_up_aux: power-controller@80330 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_up_aux";
+		power-domains = <&ps_pcie_up>;
+	};
+
+	ps_pcie_stg0: power-controller@80338 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg0";
+		power-domains = <&ps_ans2>;
+	};
+
+	ps_pcie_stg0_aux: power-controller@80340 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg0_aux";
+	};
+
+	ps_pcie_stg1: power-controller@80348 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg1";
+		power-domains = <&ps_ans2>;
+	};
+
+	ps_pcie_stg1_aux: power-controller@80350 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg1_aux";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_isp_rsts0: power-controller@84000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts0";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_rsts1: power-controller@84008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts1";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_vis: power-controller@84010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_vis";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_be: power-controller@84018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_be";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_pearl: power-controller@84020 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_pearl";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@88000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+	};
+
+	ps_venc_pipe5: power-controller@88008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+	};
+
+	ps_venc_me0: power-controller@88010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_spmi: power-controller@80058 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spmi";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_aon: power-controller@80060 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80060 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_aon";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_smc_fabric: power-controller@80030 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_fabric";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_smc_aon: power-controller@80088 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80088 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_aon";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_debug: power-controller@80050 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_nub_sram: power-controller@801a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_sram";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_fabric: power-controller@80198 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_fabric";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_smc_cpu: power-controller@801a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_cpu";
+		power-domains = <&ps_smc_fabric &ps_smc_aon>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-touchbar.dtsi b/arch/arm64/boot/dts/apple/t8012-touchbar.dtsi
new file mode 100644
index 000000000000..fc4a80d0c787
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-touchbar.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Common Device Tree for T2 devices with a Touch Bar
+ *
+ * target-type: J152f, J213, J214k, J215, J223, J680, J780
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	chosen {
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0_fe &ps_disp0_be &ps_mipi_dsi>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8012.dtsi b/arch/arm64/boot/dts/apple/t8012.dtsi
new file mode 100644
index 000000000000..e7923814169b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012.dtsi
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8012 "T2" SoC
+ *
+ * Other names: H9M, "Gibraltar"
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@10000 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x10000>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		cpu1: cpu@10001 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x10001>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>; /* P-cluster */
+		};
+	};
+
+	fusion_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		/*
+		 * Apple Fusion Architecture: Hardware big.LITTLE switcher
+		 * that use p-state transitions to switch between cores.
+		 * Only one type of core can be active at a given time.
+		 *
+		 * The E-core frequencies are adjusted so performance scales
+		 * linearly with reported clock speed.
+		 */
+
+		opp01 {
+			opp-hz = /bits/ 64 <172000000>; /* 300 MHz, E-core */
+			opp-level = <1>;
+			clock-latency-ns = <11000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <230000000>; /* 396 MHz, E-core */
+			opp-level = <2>;
+			clock-latency-ns = <140000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <425000000>; /* 732 MHz, E-core */
+			opp-level = <3>;
+			clock-latency-ns = <110000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <637000000>; /* 1092 MHz, E-core */
+			opp-level = <4>;
+			clock-latency-ns = <130000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <756000000>;
+			opp-level = <5>;
+			clock-latency-ns = <130000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <6>;
+			clock-latency-ns = <130000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1356000000>;
+			opp-level = <7>;
+			clock-latency-ns = <130000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <1644000000>;
+			opp-level = <8>;
+			clock-latency-ns = <135000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <1944000000>;
+			opp-level = <9>;
+			clock-latency-ns = <140000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2244000000>;
+			opp-level = <10>;
+			clock-latency-ns = <150000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp11 {
+			opp-hz = /bits/ 64 <2340000000>;
+			opp-level = <11>;
+			clock-latency-ns = <150000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202f20000 {
+			compatible = "apple,t8010-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02f20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a600000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a600000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 271 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,t8010-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 221>;
+			apple,npins = <221>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 51 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0100f0000 0x0 0x10000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 41>;
+			apple,npins = <41>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 137 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spmi: spmi@211180700 {
+			compatible = "apple,t8012-spmi", "apple,t8103-spmi";
+			reg = <0x2 0x11180700 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		pinctrl_nub: pinctrl@2111f0000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x111f0000 0x0 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_nub 0 0 19>;
+			apple,npins = <19>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 166 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@211200000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x11200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2112b0000 {
+			compatible = "apple,t8010-wdt", "apple,wdt";
+			reg = <0x2 0x112b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 168 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_smc: pinctrl@212024000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x12024000 0x0 0x1000>;
+			power-domains = <&ps_smc_cpu>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_smc 0 0 81>;
+			apple,npins = <81>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 201 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * SMC is not yet supported and accessing this pinctrl while SMC is
+			 * suspended results in a hang.
+			 */
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that T2 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "t8012-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8015-8.dtsi b/arch/arm64/boot/dts/apple/t8015-8.dtsi
new file mode 100644
index 000000000000..0300ee1a2ffb
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-8.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8 common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "t8015.dtsi"
+#include "t8015-common.dtsi"
+
+/ {
+	chassis-type = "handset";
+};
+
+&dwi_bl {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-8plus.dtsi b/arch/arm64/boot/dts/apple/t8015-8plus.dtsi
new file mode 100644
index 000000000000..ea291a95f028
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-8plus.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8 Plus common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/* The 8 Plus has minor differences like 1 more camera, 1 GiB of RAM more and a bigger display. */
+#include "t8015-8.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8015-common.dtsi b/arch/arm64/boot/dts/apple/t8015-common.dtsi
new file mode 100644
index 000000000000..498f58fb9715
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-common.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8, iPhone 8 Plus, iPhone X
+ *
+ * This file contains parts common to all Apple A11 devices.
+ *
+ * target-type: D20, D21, D22, D201, D211, D221
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0_be &ps_mipi_dsi &ps_disp0_hilo &ps_disp0_ppp>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-d20.dts b/arch/arm64/boot/dts/apple/t8015-d20.dts
new file mode 100644
index 000000000000..35d79e2ceebc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-d20.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8 (Global), D20 iPhone10,1 (A1863/A1906/A1907)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8015-8.dtsi"
+
+/ {
+	compatible = "apple,d20", "apple,t8015", "apple,arm-platform";
+	model = "Apple iPhone 8 (Global)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-d201.dts b/arch/arm64/boot/dts/apple/t8015-d201.dts
new file mode 100644
index 000000000000..31e0947fee70
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-d201.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8 (GSM), D20 iPhone10,4 (A1905)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8015-8.dtsi"
+
+/ {
+	compatible = "apple,d201", "apple,t8015", "apple,arm-platform";
+	model = "Apple iPhone 8 (GSM)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-d21.dts b/arch/arm64/boot/dts/apple/t8015-d21.dts
new file mode 100644
index 000000000000..a902ba7f1133
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-d21.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8 Plus (Global), D21 iPhone10,2 (A1864/A1897/A1898)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8015-8plus.dtsi"
+
+/ {
+	compatible = "apple,d21", "apple,t8015", "apple,arm-platform";
+	model = "Apple iPhone 8 Plus (Global)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-d211.dts b/arch/arm64/boot/dts/apple/t8015-d211.dts
new file mode 100644
index 000000000000..3b3f886c0c09
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-d211.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8 Plus (GSM), D211 iPhone10,5 (A1899)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8015-8plus.dtsi"
+
+/ {
+	compatible = "apple,d211", "apple,t8015", "apple,arm-platform";
+	model = "Apple iPhone 8 Plus (GSM)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-d22.dts b/arch/arm64/boot/dts/apple/t8015-d22.dts
new file mode 100644
index 000000000000..5a7a6092c2d0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-d22.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone X (Global), D22, iPhone10,3 (A1865)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8015-x.dtsi"
+
+/ {
+	compatible = "apple,d22", "apple,t8015", "apple,arm-platform";
+	model = "Apple iPhone X (Global)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-d221.dts b/arch/arm64/boot/dts/apple/t8015-d221.dts
new file mode 100644
index 000000000000..dd920c945bd6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-d221.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone X (GSM), D221, iPhone10,6 (A1901)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8015-x.dtsi"
+
+/ {
+	compatible = "apple,d221", "apple,t8015", "apple,arm-platform";
+	model = "Apple iPhone X (GSM)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi
new file mode 100644
index 000000000000..1d8da9c7863e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi
@@ -0,0 +1,932 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8015 "A11" SoC
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu2: power-controller@80010 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu2";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu3: power-controller@80018 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu3";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu4: power-controller@80020 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu4";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu5: power-controller@80028 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu5";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80158 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80160 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pcie_ref: power-controller@80148 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80170 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80178 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80180 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80188 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80190 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@801a0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@801a8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801b0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801b8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801c0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801c8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801d0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801d8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801e0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801e8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801f0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801f8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80168 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsicphy: power-controller@80128 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsicphy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_ispsens0: power-controller@80130 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@80138 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_ispsens2: power-controller@80140 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens2";
+	};
+
+	ps_mca5: power-controller@80198 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_usb: power-controller@80270 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctlreg: power-controller@80278 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctlreg";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80280 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctlreg>;
+	};
+
+	ps_usb2host1: power-controller@80290 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctlreg>;
+	};
+
+	ps_rtmux: power-controller@802b0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+	};
+
+	ps_media: power-controller@802f0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_jpg: power-controller@802f8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0_fe: power-controller@802b8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_disp0_be: power-controller@802c0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be";
+		power-domains = <&ps_disp0_fe>;
+	};
+
+	ps_disp0_gp: power-controller@802c8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_gp";
+		power-domains = <&ps_disp0_be>;
+		status = "disabled";
+	};
+
+	ps_uart3: power-controller@80200 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@80208 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@80210 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@80218 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80220 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80228 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_hfd0: power-controller@80238 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hfd0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80248 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80250 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4X interface */
+	};
+
+	ps_dcs1: power-controller@80258 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4X interface */
+	};
+
+	ps_dcs2: power-controller@80260 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4X interface */
+	};
+
+	ps_dcs3: power-controller@80268 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4X interface */
+	};
+
+	ps_usb2host0_ohci: power-controller@80288 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usb2dev: power-controller@80298 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2dev";
+		power-domains = <&ps_usbctlreg>;
+	};
+
+	ps_smx: power-controller@802a0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802a8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mipi_dsi: power-controller@802d8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_dp: power-controller@802e0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_dpa: power-controller@80230 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa";
+	};
+
+	ps_disp0_be_2x: power-controller@802d0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be_2x";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_isp_sys: power-controller@80350 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@80300 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc_sys: power-controller@80398 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pmp: power-controller@80308 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@80310 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_pcie: power-controller@80318 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+		power-domains = <&ps_pcie_aux>, <&ps_pcie_direct>, <&ps_pcie_ref>;
+	};
+
+	ps_pcie_aux: power-controller@80320 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_vdec0: power-controller@80388 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec0";
+		power-domains = <&ps_media>;
+	};
+
+	ps_gfx: power-controller@80338 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_ans2: power-controller@80328 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans2";
+		apple,always-on;
+	};
+
+	ps_pcie_direct: power-controller@80330 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_direct";
+		apple,always-on;
+	};
+
+	ps_avd_sys: power-controller@803a8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x803a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "avd_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_disp0_gp0: power-controller@80830 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80830 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_gp0";
+		power-domains = <&ps_disp0_gp>;
+		status = "disabled";
+	};
+
+	ps_disp0_gp1: power-controller@80838 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80838 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_gp1";
+		status = "disabled";
+	};
+
+	ps_disp0_ppp: power-controller@80840 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80840 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_ppp";
+	};
+
+	ps_disp0_hilo: power-controller@80848 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80848 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_hilo";
+	};
+
+	ps_isp_rsts0: power-controller@84000 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts0";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_rsts1: power-controller@84008 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts1";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_vis: power-controller@84010 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_vis";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_be: power-controller@84018 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_be";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_pearl: power-controller@84020 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_pearl";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_dprx: power-controller@84028 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dprx";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_cnv: power-controller@84030 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_cnv";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_venc_dma: power-controller@88000 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_dma";
+	};
+
+	ps_venc_pipe4: power-controller@88010 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+	};
+
+	ps_venc_pipe5: power-controller@88018 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+	};
+
+	ps_venc_me0: power-controller@88020 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88028 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop_base: power-controller@80008 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_base";
+		power-domains = <&ps_aop_cpu &ps_aop_filter>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80050 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_cpu: power-controller@80020 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80000 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_spmi: power-controller@80058 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spmi";
+		apple,always-on; /* System Power Management Interface */
+	};
+
+	ps_smc_i2cm1: power-controller@800a8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x800a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_i2cm1";
+	};
+
+	ps_smc_fabric: power-controller@80030 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_fabric";
+	};
+
+	ps_smc_cpu: power-controller@80140 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_cpu";
+		power-domains = <&ps_smc_fabric &ps_smc_i2cm1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-x.dtsi b/arch/arm64/boot/dts/apple/t8015-x.dtsi
new file mode 100644
index 000000000000..41134ed40b89
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-x.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone X common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "t8015.dtsi"
+#include "t8015-common.dtsi"
+
+/ {
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015.dtsi b/arch/arm64/boot/dts/apple/t8015.dtsi
new file mode 100644
index 000000000000..586d3cf1f375
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015.dtsi
@@ -0,0 +1,535 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8015 "A11" SoC
+ *
+ * Other names: H10, "Skye"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e0>;
+				};
+				core1 {
+					cpu = <&cpu_e1>;
+				};
+				core2 {
+					cpu = <&cpu_e2>;
+				};
+				core3 {
+					cpu = <&cpu_e3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p0>;
+				};
+				core1 {
+					cpu = <&cpu_p1>;
+				};
+			};
+		};
+
+		cpu_e0: cpu@0 {
+			compatible = "apple,mistral";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_e>;
+			operating-points-v2 = <&mistral_opp>;
+			capacity-dmips-mhz = <633>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
+		};
+
+		cpu_e1: cpu@1 {
+			compatible = "apple,mistral";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_e>;
+			operating-points-v2 = <&mistral_opp>;
+			capacity-dmips-mhz = <633>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
+		};
+
+		cpu_e2: cpu@2 {
+			compatible = "apple,mistral";
+			reg = <0x0 0x2>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_e>;
+			operating-points-v2 = <&mistral_opp>;
+			capacity-dmips-mhz = <633>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
+		};
+
+		cpu_e3: cpu@3 {
+			compatible = "apple,mistral";
+			reg = <0x0 0x3>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_e>;
+			operating-points-v2 = <&mistral_opp>;
+			capacity-dmips-mhz = <633>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
+		};
+
+		cpu_p0: cpu@10004 {
+			compatible = "apple,monsoon";
+			reg = <0x0 0x10004>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_p>;
+			operating-points-v2 = <&monsoon_opp>;
+			capacity-dmips-mhz = <1024>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_p1: cpu@10005 {
+			compatible = "apple,monsoon";
+			reg = <0x0 0x10005>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_p>;
+			operating-points-v2 = <&monsoon_opp>;
+			capacity-dmips-mhz = <1024>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x800000>;
+		};
+	};
+
+	mistral_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <1800>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <453000000>;
+			opp-level = <2>;
+			clock-latency-ns = <140000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <672000000>;
+			opp-level = <3>;
+			clock-latency-ns = <105000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <4>;
+			clock-latency-ns = <115000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1272000000>;
+			opp-level = <5>;
+			clock-latency-ns = <125000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1572000000>;
+			opp-level = <6>;
+			clock-latency-ns = <135000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp07 {
+			opp-hz = /bits/ 64 <1680000000>;
+			opp-level = <7>;
+			clock-latency-ns = <135000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	monsoon_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <1400>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <453000000>;
+			opp-level = <2>;
+			clock-latency-ns = <140000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <853000000>;
+			opp-level = <3>;
+			clock-latency-ns = <110000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <4>;
+			clock-latency-ns = <110000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1812000000>;
+			opp-level = <5>;
+			clock-latency-ns = <125000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <6>;
+			clock-latency-ns = <130000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2304000000>;
+			opp-level = <7>;
+			clock-latency-ns = <140000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <2376000000>;
+			opp-level = <8>;
+			clock-latency-ns = <140000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq_e: performance-controller@208e20000 {
+			compatible = "apple,t8015-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x08e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		cpufreq_p: performance-controller@208ea0000 {
+			compatible = "apple,t8015-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x08ea0000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		i2c0: i2c@22e200000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e200000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 304 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@22e204000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e204000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 305 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@22e208000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e208000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 306 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@22e20c000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e20c000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 307 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		serial0: serial@22e600000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x2e600000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 282 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		aic: interrupt-controller@232100000 {
+			compatible = "apple,t8015-aic", "apple,aic";
+			reg = <0x2 0x32100000 0x0 0x8000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		pmgr: power-management@232000000 {
+			compatible = "apple,t8015-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x32000000 0 0x8c000>;
+		};
+
+		dwi_bl: backlight@232200080 {
+			compatible = "apple,t8015-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x32200080 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
+		};
+
+		pinctrl_ap: pinctrl@233100000 {
+			compatible = "apple,t8015-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x33100000 0x0 0x1000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 223>;
+			apple,npins = <223>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 56 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(73, 1)>,
+					 <APPLE_PINMUX(72, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(182, 1)>,
+					 <APPLE_PINMUX(181, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(4, 1)>,
+					 <APPLE_PINMUX(3, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(184, 1)>,
+					 <APPLE_PINMUX(183, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@2340f0000 {
+			compatible = "apple,t8015-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x340f0000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 49>;
+			apple,npins = <49>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 141 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spmi: spmi@235180700 {
+			compatible = "apple,t8015-spmi", "apple,t8103-spmi";
+			reg = <0x2 0x35180700 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		pinctrl_nub: pinctrl@2351f0000 {
+			compatible = "apple,t8015-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x351f0000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_nub 0 0 8>;
+			apple,npins = <8>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 170 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@235200000 {
+			compatible = "apple,t8015-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x35200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2352b0000 {
+			compatible = "apple,t8015-wdt", "apple,wdt";
+			reg = <0x2 0x352b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 172 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_smc: pinctrl@236024000 {
+			compatible = "apple,t8015-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x36024000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_smc 0 0 6>;
+			apple,npins = <6>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 205 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * SMC is not yet supported and accessing this pinctrl while SMC is
+			 * suspended results in a hang.
+			 */
+			status = "disabled";
+		};
+
+		ans_mbox: mbox@257008000 {
+			compatible = "apple,t8015-asc-mailbox";
+			reg = <0x2 0x57008000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 265 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 266 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 267 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+			power-domains = <&ps_ans2>;
+		};
+
+		sart: iommu@259c50000 {
+			compatible = "apple,t8015-sart";
+			reg = <0x2 0x59c50000 0x0 0x10000>;
+			power-domains = <&ps_ans2>;
+		};
+
+		nvme@259cc0000 {
+			compatible = "apple,t8015-nvme-ans2";
+			reg = <0x2 0x59cc0000 0x0 0x40000>,
+				<0x2 0x59d20000 0x0 0x2000>;
+			reg-names = "nvme", "ans";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 270 IRQ_TYPE_LEVEL_HIGH>;
+			mboxes = <&ans_mbox>;
+			apple,sart = <&sart>;
+			power-domains = <&ps_ans2>, <&ps_pcie>;
+			power-domain-names = "ans", "apcie0";
+			resets = <&ps_ans2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A11 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "t8015-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts
index 56b0c67bfcda..5b3c42e9f0e6 100644
--- a/arch/arm64/boot/dts/apple/t8103-j293.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j293.dts
@@ -17,6 +17,14 @@
 	compatible = "apple,j293", "apple,t8103", "apple,arm-platform";
 	model = "Apple MacBook Pro (13-inch, M1, 2020)";
 
+	/*
+	 * All of those are used by the bootloader to pass calibration
+	 * blobs and other device-specific properties
+	 */
+	aliases {
+		touchbar0 = &touchbar0;
+	};
+
 	led-controller {
 		compatible = "pwm-leds";
 		led-0 {
@@ -49,3 +57,65 @@
 &fpwm1 {
 	status = "okay";
 };
+
+&spi0 {
+	cs-gpios = <&pinctrl_ap 109 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	touchbar0: touchbar@0 {
+		compatible = "apple,j293-touchbar";
+		reg = <0>;
+		spi-max-frequency = <11500000>;
+		spi-cs-setup-delay-ns = <2000>;
+		spi-cs-hold-delay-ns = <2000>;
+		reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>;
+		interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>;
+		firmware-name = "apple/dfrmtfw-j293.bin";
+		touchscreen-size-x = <23045>;
+		touchscreen-size-y = <640>;
+		touchscreen-inverted-y;
+	};
+};
+
+/*
+ * The driver depends on boot loader initialized state which resets when this
+ * power-domain is powered off. This happens on suspend or when the driver is
+ * missing during boot. Mark the domain as always on until the driver can
+ * handle this.
+ */
+&ps_dispdfr_be {
+	apple,always-on;
+};
+
+&display_dfr {
+	status = "okay";
+};
+
+&dfr_mipi_out {
+	dfr_mipi_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&dfr_panel_in>;
+	};
+};
+
+&displaydfr_mipi {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dfr_panel: panel@0 {
+		compatible = "apple,j293-summit", "apple,summit";
+		reg = <0>;
+		max-brightness = <255>;
+
+		port {
+			dfr_panel_in: endpoint {
+				remote-endpoint = <&dfr_mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&displaydfr_dart {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts
index 152f95fd49a2..7089ccf3ce55 100644
--- a/arch/arm64/boot/dts/apple/t8103-j457.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -21,6 +21,14 @@
 	};
 };
 
+/*
+ * Adjust pcie0's iommu-map to account for the disabled port01.
+ */
+&pcie0 {
+	iommu-map = <0x100 &pcie0_dart_0 1 1>,
+			<0x200 &pcie0_dart_2 1 1>;
+};
+
 &bluetooth0 {
 	brcm,board-type = "apple,santorini";
 };
@@ -36,10 +44,10 @@
  */
 
 &port02 {
-	bus-range = <3 3>;
+	bus-range = <2 2>;
 	status = "okay";
 	ethernet0: ethernet@0,0 {
-		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 00];
 	};
diff --git a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
index 5988a4eb6efa..0c8206156bfe 100644
--- a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -71,7 +71,7 @@
  */
 &port00 {
 	bus-range = <1 1>;
-	wifi0: network@0,0 {
+	wifi0: wifi@0,0 {
 		compatible = "pci14e4,4425";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
@@ -90,3 +90,5 @@
 &nco_clkref {
 	clock-frequency = <900000000>;
 };
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
index 9645861a858c..c41c57d63997 100644
--- a/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
@@ -387,6 +387,15 @@
 		power-domains = <&ps_sio>, <&ps_spi_p>;
 	};
 
+	ps_spi4: power-controller@260 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi4";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
 	ps_uart_n: power-controller@268 {
 		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
 		reg = <0x268 4>;
@@ -558,15 +567,6 @@
 		apple,always-on; /* Memory controller */
 	};
 
-	ps_spi4: power-controller@260 {
-		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
-		reg = <0x260 4>;
-		#power-domain-cells = <0>;
-		#reset-cells = <0>;
-		label = "spi4";
-		power-domains = <&ps_sio>, <&ps_spi_p>;
-	};
-
 	ps_dcs0: power-controller@300 {
 		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
 		reg = <0x300 4>;
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 9b0dad6b6184..8b7b27887968 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 / {
 	compatible = "apple,t8103", "apple,arm-platform";
@@ -18,6 +19,10 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		gpu = &gpu;
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -326,6 +331,20 @@
 		clock-output-names = "clkref";
 	};
 
+	clk_120m: clock-120m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <120000000>;
+		clock-output-names = "clk_120m";
+	};
+
+	clk_200m: clock-200m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "clk_200m";
+	};
+
 	/*
 	 * This is a fabulated representation of the input clock
 	 * to NCO since we don't know the true clock tree.
@@ -336,6 +355,36 @@
 		clock-output-names = "nco_ref";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpu_globals: globals {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_a: hw-cal-a {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_b: hw-cal-b {
+			status = "disabled";
+		};
+
+		uat_handoff: uat-handoff {
+			status = "disabled";
+		};
+
+		uat_pagetables: uat-pagetables {
+			status = "disabled";
+		};
+
+		uat_ttbs: uat-ttbs {
+			status = "disabled";
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -344,6 +393,34 @@
 		ranges;
 		nonposted-mmio;
 
+		gpu: gpu@206400000 {
+			compatible = "apple,agx-g13g";
+			reg = <0x2 0x6400000 0 0x40000>,
+				<0x2 0x4000000 0 0x1000000>;
+			reg-names = "asc", "sgx";
+			mboxes = <&agx_mbox>;
+			power-domains = <&ps_gfx>;
+			memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+					<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+			memory-region-names = "ttbs", "pagetables", "handoff",
+					      "hw-cal-a", "hw-cal-b", "globals";
+
+			apple,firmware-abi = <0 0 0>;
+		};
+
+		agx_mbox: mbox@206408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x6408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 575 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 576 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 577 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 578 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
 		cpufreq_e: performance-controller@210e20000 {
 			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
 			reg = <0x2 0x10e20000 0 0x1000>;
@@ -356,6 +433,65 @@
 			#performance-domain-cells = <0>;
 		};
 
+		display_dfr: display-pipe@228200000 {
+			compatible = "apple,t8103-display-pipe", "apple,h7-display-pipe";
+			reg = <0x2 0x28200000 0x0 0xc000>,
+			      <0x2 0x28400000 0x0 0x4000>;
+			reg-names = "be", "fe";
+			power-domains = <&ps_dispdfr_fe>, <&ps_dispdfr_be>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 502 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 506 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "be", "fe";
+			iommus = <&displaydfr_dart 0>;
+			status = "disabled";
+
+			port {
+				dfr_adp_out_mipi: endpoint {
+					remote-endpoint = <&dfr_mipi_in_adp>;
+				};
+			};
+		};
+
+		displaydfr_dart: iommu@228304000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x2 0x28304000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 504 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_dispdfr_fe>;
+			status = "disabled";
+		};
+
+		displaydfr_mipi: dsi@228600000 {
+			compatible = "apple,t8103-display-pipe-mipi", "apple,h7-display-pipe-mipi";
+			reg = <0x2 0x28600000 0x0 0x100000>;
+			power-domains = <&ps_mipi_dsi>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dfr_mipi_in: port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dfr_mipi_in_adp: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&dfr_adp_out_mipi>;
+					};
+				};
+
+				dfr_mipi_out: port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
 		sio_dart: iommu@235004000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x2 0x35004000 0x0 0x4000>;
@@ -441,6 +577,48 @@
 			status = "disabled";
 		};
 
+		spi0: spi@235100000 {
+			compatible = "apple,t8103-spi", "apple,spi";
+			reg = <0x2 0x35100000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 614 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_200m>;
+			pinctrl-0 = <&spi0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@235104000 {
+			compatible = "apple,t8103-spi", "apple,spi";
+			reg = <0x2 0x35104000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 615 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_200m>;
+			pinctrl-0 = <&spi1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@23510c000 {
+			compatible = "apple,t8103-spi", "apple,spi";
+			reg = <0x2 0x3510c000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 617 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_120m>;
+			pinctrl-0 = <&spi3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		serial0: serial@235200000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x35200000 0x0 0x1000>;
@@ -597,6 +775,26 @@
 					 <APPLE_PINMUX(134, 1)>;
 			};
 
+			spi0_pins: spi0-pins {
+				pinmux = <APPLE_PINMUX(67, 1)>, /* CLK */
+					<APPLE_PINMUX(68, 1)>,  /* MOSI */
+					<APPLE_PINMUX(69, 1)>;  /* MISO */
+			};
+
+			spi1_pins: spi1-pins {
+				pinmux = <APPLE_PINMUX(42, 1)>,
+					<APPLE_PINMUX(43, 1)>,
+					<APPLE_PINMUX(44, 1)>,
+					<APPLE_PINMUX(45, 1)>;
+			};
+
+			spi3_pins: spi3-pins {
+				pinmux = <APPLE_PINMUX(46, 1)>,
+					<APPLE_PINMUX(47, 1)>,
+					<APPLE_PINMUX(48, 1)>,
+					<APPLE_PINMUX(49, 1)>;
+			};
+
 			pcie_pins: pcie-pins {
 				pinmux = <APPLE_PINMUX(150, 1)>,
 					 <APPLE_PINMUX(151, 1)>,
@@ -604,6 +802,63 @@
 			};
 		};
 
+		nub_spmi: spmi@23d0d9300 {
+			compatible = "apple,t8103-spmi", "apple,spmi";
+			reg = <0x2 0x3d0d9300 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			pmic1: pmic@f {
+				compatible = "apple,sera-pmic", "apple,spmi-nvmem";
+				reg = <0xf SPMI_USID>;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					boot_stage: boot-stage@9f01 {
+						reg = <0x9f01 0x1>;
+					};
+
+					boot_error_count: boot-error-count@9f02,0 {
+						reg = <0x9f02 0x1>;
+						bits = <0 4>;
+					};
+
+					panic_count: panic-count@9f02,4 {
+						reg = <0x9f02 0x1>;
+						bits = <4 4>;
+					};
+
+					boot_error_stage: boot-error-stage@9f03 {
+						reg = <0x9f03 0x1>;
+					};
+
+					shutdown_flag: shutdown-flag@9f0f,3 {
+						reg = <0x9f0f 0x1>;
+						bits = <3 1>;
+					};
+
+					fault_shadow: fault-shadow@a67b {
+						reg = <0xa67b 0x10>;
+					};
+
+					socd: socd@ab00 {
+						reg = <0xab00 0x400>;
+					};
+
+					pm_setting: pm-setting@d001 {
+						reg = <0xd001 0x1>;
+					};
+
+					rtc_offset: rtc-offset@d100 {
+						reg = <0xd100 0x6>;
+					};
+				};
+			};
+		};
+
 		pinctrl_nub: pinctrl@23d1f0000 {
 			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3d1f0000 0x0 0x4000>;
@@ -641,6 +896,41 @@
 			interrupts = <AIC_IRQ 338 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		smc: smc@23e400000 {
+			compatible = "apple,t8103-smc", "apple,smc";
+			reg = <0x2 0x3e400000 0x0 0x4000>,
+				<0x2 0x3fe00000 0x0 0x100000>;
+			reg-names = "smc", "sram";
+			mboxes = <&smc_mbox>;
+
+			smc_gpio: gpio {
+				compatible = "apple,smc-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			smc_reboot: reboot {
+				compatible = "apple,smc-reboot";
+				nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+					<&boot_error_count>, <&panic_count>;
+				nvmem-cell-names = "shutdown_flag", "boot_stage",
+					"boot_error_count", "panic_count";
+			};
+		};
+
+		smc_mbox: mbox@23e408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x3e408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 400 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 401 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 402 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 403 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
 		pinctrl_smc: pinctrl@23e820000 {
 			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3e820000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/apple/t8112-j415.dts b/arch/arm64/boot/dts/apple/t8112-j415.dts
new file mode 100644
index 000000000000..b54e218e5384
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j415.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Air (15-inch, M2, 2023)
+ *
+ * target-type: J415
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j415", "apple,t8112", "apple,arm-platform";
+	model = "Apple MacBook Air (15-inch, M2, 2023)";
+
+	aliases {
+		bluetooth0 = &bluetooth0;
+		wifi0 = &wifi0;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+		brcm,board-type = "apple,snake";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+		brcm,board-type = "apple,snake";
+	};
+};
+
+&i2c0 {
+	/* MagSafe port */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-j493.dts b/arch/arm64/boot/dts/apple/t8112-j493.dts
index 0ad908349f55..fb8ad7d4c65a 100644
--- a/arch/arm64/boot/dts/apple/t8112-j493.dts
+++ b/arch/arm64/boot/dts/apple/t8112-j493.dts
@@ -17,8 +17,13 @@
 	compatible = "apple,j493", "apple,t8112", "apple,arm-platform";
 	model = "Apple MacBook Pro (13-inch, M2, 2022)";
 
+	/*
+	 * All of those are used by the bootloader to pass calibration
+	 * blobs and other device-specific properties
+	 */
 	aliases {
 		bluetooth0 = &bluetooth0;
+		touchbar0 = &touchbar0;
 		wifi0 = &wifi0;
 	};
 
@@ -36,6 +41,49 @@
 };
 
 /*
+ * The driver depends on boot loader initialized state which resets when this
+ * power-domain is powered off. This happens on suspend or when the driver is
+ * missing during boot. Mark the domain as always on until the driver can
+ * handle this.
+ */
+&ps_dispdfr_be {
+	apple,always-on;
+};
+
+&display_dfr {
+	status = "okay";
+};
+
+&dfr_mipi_out {
+	dfr_mipi_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&dfr_panel_in>;
+	};
+};
+
+&displaydfr_mipi {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dfr_panel: panel@0 {
+		compatible = "apple,j493-summit", "apple,summit";
+		reg = <0>;
+		max-brightness = <255>;
+
+		port {
+			dfr_panel_in: endpoint {
+				remote-endpoint = <&dfr_mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&displaydfr_dart {
+	status = "okay";
+};
+
+/*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader
  * (such as MAC addresses).
@@ -67,3 +115,21 @@
 &fpwm1 {
 	status = "okay";
 };
+
+&spi3 {
+	status = "okay";
+
+	touchbar0: touchbar@0 {
+		compatible = "apple,j493-touchbar";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+		spi-cs-setup-delay-ns = <2000>;
+		spi-cs-hold-delay-ns = <2000>;
+		reset-gpios = <&pinctrl_ap 170 GPIO_ACTIVE_LOW>;
+		interrupts-extended = <&pinctrl_ap 174 IRQ_TYPE_EDGE_FALLING>;
+		firmware-name = "apple/dfrmtfw-j493.bin";
+		touchscreen-size-x = <23045>;
+		touchscreen-size-y = <640>;
+		touchscreen-inverted-y;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
index f5edf61113e7..6da35496a4c8 100644
--- a/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
+++ b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
@@ -79,3 +79,5 @@
 &nco_clkref {
 	clock-frequency = <900000000>;
 };
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi
index 1666e6ab250b..3f79878b25af 100644
--- a/arch/arm64/boot/dts/apple/t8112.dtsi
+++ b/arch/arm64/boot/dts/apple/t8112.dtsi
@@ -19,6 +19,10 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		gpu = &gpu;
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -349,6 +353,13 @@
 		clock-output-names = "clkref";
 	};
 
+	clk_200m: clock-200m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "clk_200m";
+	};
+
 	/*
 	 * This is a fabulated representation of the input clock
 	 * to NCO since we don't know the true clock tree.
@@ -359,6 +370,36 @@
 		clock-output-names = "nco_ref";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpu_globals: globals {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_a: hw-cal-a {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_b: hw-cal-b {
+			status = "disabled";
+		};
+
+		uat_handoff: uat-handoff {
+			status = "disabled";
+		};
+
+		uat_pagetables: uat-pagetables {
+			status = "disabled";
+		};
+
+		uat_ttbs: uat-ttbs {
+			status = "disabled";
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -367,6 +408,34 @@
 		ranges;
 		nonposted-mmio;
 
+		gpu: gpu@206400000 {
+			compatible = "apple,agx-g14g";
+			reg = <0x2 0x6400000 0 0x40000>,
+				<0x2 0x4000000 0 0x1000000>;
+			reg-names = "asc", "sgx";
+			mboxes = <&agx_mbox>;
+			power-domains = <&ps_gfx>;
+			memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+					<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+			memory-region-names = "ttbs", "pagetables", "handoff",
+					      "hw-cal-a", "hw-cal-b", "globals";
+
+			apple,firmware-abi = <0 0 0>;
+		};
+
+		agx_mbox: mbox@206408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x6408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 709 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 710 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 711 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 712 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
 		cpufreq_e: cpufreq@210e20000 {
 			compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq";
 			reg = <0x2 0x10e20000 0 0x1000>;
@@ -379,6 +448,65 @@
 			#performance-domain-cells = <0>;
 		};
 
+		display_dfr: display-pipe@228200000 {
+			compatible = "apple,t8112-display-pipe", "apple,h7-display-pipe";
+			reg = <0x2 0x28200000 0x0 0xc000>,
+			      <0x2 0x28400000 0x0 0x4000>;
+			reg-names = "be", "fe";
+			power-domains = <&ps_dispdfr_fe>, <&ps_dispdfr_be>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 614 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 618 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "be", "fe";
+			iommus = <&displaydfr_dart 0>;
+			status = "disabled";
+
+			port {
+				dfr_adp_out_mipi: endpoint {
+					remote-endpoint = <&dfr_mipi_in_adp>;
+				};
+			};
+		};
+
+		displaydfr_dart: iommu@228304000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x2 0x28304000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 616 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_dispdfr_fe>;
+			status = "disabled";
+		};
+
+		displaydfr_mipi: dsi@228600000 {
+			compatible = "apple,t8112-display-pipe-mipi", "apple,h7-display-pipe-mipi";
+			reg = <0x2 0x28600000 0x0 0x100000>;
+			power-domains = <&ps_mipi_dsi>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dfr_mipi_in: port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dfr_mipi_in_adp: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&dfr_adp_out_mipi>;
+					};
+				};
+
+				dfr_mipi_out: port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
 		sio_dart: iommu@235004000 {
 			compatible = "apple,t8110-dart";
 			reg = <0x2 0x35004000 0x0 0x4000>;
@@ -467,6 +595,34 @@
 			status = "disabled";
 		};
 
+		spi1: spi@235104000 {
+			compatible = "apple,t8112-spi", "apple,spi";
+			reg = <0x2 0x35104000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 749 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_200m>;
+			pinctrl-0 = <&spi1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@23510c000 {
+			compatible = "apple,t8112-spi", "apple,spi";
+			reg = <0x2 0x3510c000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 751 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkref>;
+			pinctrl-0 = <&spi3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled"; /* only used in J493 */
+		};
+
 		serial0: serial@235200000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x35200000 0x0 0x1000>;
@@ -626,13 +782,20 @@
 					 <APPLE_PINMUX(130, 1)>;
 			};
 
-			spi3_pins: spi3-pins {
+			spi1_pins: spi1-pins {
 				pinmux = <APPLE_PINMUX(46, 1)>,
 					<APPLE_PINMUX(47, 1)>,
 					<APPLE_PINMUX(48, 1)>,
 					<APPLE_PINMUX(49, 1)>;
 			};
 
+			spi3_pins: spi3-pins {
+				pinmux = <APPLE_PINMUX(93, 1)>,
+					<APPLE_PINMUX(94, 1)>,
+					<APPLE_PINMUX(95, 1)>,
+					<APPLE_PINMUX(96, 1)>;
+			};
+
 			pcie_pins: pcie-pins {
 				pinmux = <APPLE_PINMUX(162, 1)>,
 					 <APPLE_PINMUX(163, 1)>,
@@ -679,6 +842,98 @@
 			interrupts = <AIC_IRQ 379 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		nub_spmi: spmi@23d714000 {
+			compatible = "apple,t8112-spmi", "apple,spmi";
+			reg = <0x2 0x3d714000 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			pmic1: pmic@e {
+				compatible = "apple,stowe-pmic", "apple,spmi-nvmem";
+				reg = <0xe SPMI_USID>;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					fault_shadow: fault-shadow@867b {
+						reg = <0x867b 0x10>;
+					};
+
+					socd: socd@8b00 {
+						reg = <0x8b00 0x400>;
+					};
+
+					boot_stage: boot-stage@f701 {
+						reg = <0xf701 0x1>;
+					};
+
+					boot_error_count: boot-error-count@f702,0 {
+						reg = <0xf702 0x1>;
+						bits = <0 4>;
+					};
+
+					panic_count: panic-count@f702,4 {
+						reg = <0xf702 0x1>;
+						bits = <4 4>;
+					};
+
+					boot_error_stage: boot-error-stage@f703 {
+						reg = <0xf703 0x1>;
+					};
+
+					shutdown_flag: shutdown-flag@f70f,3 {
+						reg = <0xf70f 0x1>;
+						bits = <3 1>;
+					};
+
+					pm_setting: pm-setting@f801 {
+						reg = <0xf801 0x1>;
+					};
+
+					rtc_offset: rtc-offset@f900 {
+						reg = <0xf900 0x6>;
+					};
+				};
+			};
+		};
+
+		smc: smc@23e400000 {
+			compatible = "apple,t8112-smc", "apple,smc";
+			reg = <0x2 0x3e400000 0x0 0x4000>,
+				<0x2 0x3fe00000 0x0 0x100000>;
+			reg-names = "smc", "sram";
+			mboxes = <&smc_mbox>;
+
+			smc_gpio: gpio {
+				compatible = "apple,smc-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			smc_reboot: reboot {
+				compatible = "apple,smc-reboot";
+				nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+					<&boot_error_count>, <&panic_count>;
+				nvmem-cell-names = "shutdown_flag", "boot_stage",
+					"boot_error_count", "panic_count";
+			};
+		};
+
+		smc_mbox: mbox@23e408000 {
+			compatible = "apple,t8112-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x3e408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 499 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 500 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 501 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 502 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
 		pinctrl_smc: pinctrl@23e820000 {
 			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3e820000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index d908e96d7ddc..f30ee045dc95 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -7,3 +7,4 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += fvp-base-revc.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += corstone1000-fvp.dtb corstone1000-mps3.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += morello-sdp.dtb morello-fvp.dtb
diff --git a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
index 901a7fc83307..66ba6b027193 100644
--- a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
+++ b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
@@ -21,7 +21,7 @@
 		reg-io-width = <2>;
 	};
 
-	vmmc_v3_3d: fixed_v3_3d {
+	vmmc_v3_3d: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc_supply";
 		regulator-min-microvolt = <3300000>;
@@ -49,3 +49,29 @@
 		clock-names = "smclk", "apb_pclk";
 	};
 };
+
+&cpus {
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a35";
+		reg = <0x1>;
+		enable-method = "psci";
+		next-level-cache = <&L2_0>;
+	};
+
+	cpu2: cpu@2 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a35";
+		reg = <0x2>;
+		enable-method = "psci";
+		next-level-cache = <&L2_0>;
+	};
+
+	cpu3: cpu@3 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a35";
+		reg = <0x3>;
+		enable-method = "psci";
+		next-level-cache = <&L2_0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/corstone1000.dtsi b/arch/arm64/boot/dts/arm/corstone1000.dtsi
index 6ad7829f9e28..f35a5c96f3da 100644
--- a/arch/arm64/boot/dts/arm/corstone1000.dtsi
+++ b/arch/arm64/boot/dts/arm/corstone1000.dtsi
@@ -21,7 +21,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	cpus {
+	cpus: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -29,6 +29,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a35";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&L2_0>;
 		};
 	};
@@ -60,14 +61,14 @@
 		cache-sets = <1024>;
 	};
 
-	refclk100mhz: refclk100mhz {
+	refclk100mhz: clock-100000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "apb_pclk";
 	};
 
-	smbclk: refclk24mhzx2 {
+	smbclk: clock-48000000 {
 		/* Reference 24MHz clock x 2 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -83,7 +84,7 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	uartclk: uartclk {
+	uartclk: clock-50000000 {
 		/* UART clock - 50MHz */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -108,7 +109,6 @@
 			reg = <0x1a220000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			clock-frequency = <50000000>;
 			ranges;
 
 			frame@1a230000 {
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 7b41537731a6..a4b2b78d4df3 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -18,7 +18,9 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	chosen { };
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
 	aliases {
 		serial0 = &v2m_serial0;
@@ -75,7 +77,6 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <100000000>;
 	};
 
 	pmu {
@@ -99,21 +100,21 @@
 		timeout-sec = <30>;
 	};
 
-	v2m_clk24mhz: clk24mhz {
+	v2m_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "v2m:clk24mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "v2m:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
index 60472d65a355..68a69f17e93d 100644
--- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts
+++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
@@ -24,7 +24,9 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	chosen { };
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
 	aliases {
 		serial0 = &v2m_serial0;
@@ -42,6 +44,30 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <40>;
+				exit-latency-us = <100>;
+				min-residency-us = <150>;
+				status = "disabled";
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1000>;
+				min-residency-us = <2500>;
+				status = "disabled";
+			};
+		};
+
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
@@ -54,6 +80,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu1: cpu@100 {
 			device_type = "cpu";
@@ -67,6 +94,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu2: cpu@200 {
 			device_type = "cpu";
@@ -80,6 +108,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu3: cpu@300 {
 			device_type = "cpu";
@@ -93,6 +122,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu4: cpu@10000 {
 			device_type = "cpu";
@@ -106,6 +136,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu5: cpu@10100 {
 			device_type = "cpu";
@@ -119,6 +150,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu6: cpu@10200 {
 			device_type = "cpu";
@@ -132,6 +164,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu7: cpu@10300 {
 			device_type = "cpu";
@@ -145,6 +178,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		C0_L2: l2-cache0 {
 			compatible = "cache";
@@ -167,7 +201,7 @@
 
 	memory@80000000 {
 		device_type = "memory";
-		reg = <0x00000000 0x80000000 0 0x80000000>,
+		reg = <0x00000000 0x80000000 0 0x7c000000>,
 		      <0x00000008 0x80000000 0 0x80000000>;
 	};
 
@@ -215,6 +249,19 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 
+	timer@2a810000 {
+		compatible = "arm,armv7-timer-mem";
+		reg = <0x0 0x2a810000 0x0 0x10000>;
+		ranges = <0 0x0 0x2a820000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		frame@2a830000 {
+			frame-number = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x10000 0x10000>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -225,13 +272,67 @@
 		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	ete-0 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu0>;
+		status = "disabled";
+	};
+
+	ete-1 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu1>;
+		status = "disabled";
+	};
+
+	ete-2 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu2>;
+		status = "disabled";
+	};
+
+	ete-3 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu3>;
+		status = "disabled";
+	};
+
+	ete-4 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu4>;
+		status = "disabled";
+	};
+
+	ete-5 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu5>;
+		status = "disabled";
+	};
+
+	ete-6 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu6>;
+		status = "disabled";
+	};
+
+	ete-7 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu7>;
+		status = "disabled";
+	};
+
+	trbe {
+		compatible = "arm,trace-buffer-extension";
+		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+
 	pci: pci@40000000 {
 		#address-cells = <0x3>;
 		#size-cells = <0x2>;
 		#interrupt-cells = <0x1>;
 		compatible = "pci-host-ecam-generic";
 		device_type = "pci";
-		bus-range = <0x0 0x1>;
+		bus-range = <0x0 0xff>;
 		reg = <0x0 0x40000000 0x0 0x10000000>;
 		ranges = <0x2000000 0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>;
 		interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
@@ -243,6 +344,7 @@
 		iommu-map = <0x0 &smmu 0x0 0x10000>;
 
 		dma-coherent;
+		ats-supported;
 	};
 
 	smmu: iommu@2b400000 {
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 8b4d280b1e7e..9ccb80821bdb 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -10,7 +10,6 @@
 	memtimer: timer@2a810000 {
 		compatible = "arm,armv7-timer-mem";
 		reg = <0x0 0x2a810000 0x0 0x10000>;
-		clock-frequency = <50000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x0 0x2a820000 0x20000>;
@@ -663,7 +662,6 @@
 		dma-coherent;
 		/* The SMMU is only really of interest to bare-metal hypervisors */
 		/* iommus = <&smmu_gpu 0>; */
-		status = "disabled";
 	};
 
 	sram: sram@2e000000 {
@@ -747,7 +745,7 @@
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 0>;
@@ -760,7 +758,7 @@
 			};
 		};
 
-		soc {
+		soc-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 3>;
@@ -773,28 +771,28 @@
 			};
 		};
 
-		big_cluster_thermal_zone: big-cluster {
+		big_cluster_thermal_zone: big-cl-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 21>;
 			status = "disabled";
 		};
 
-		little_cluster_thermal_zone: little-cluster {
+		little_cluster_thermal_zone: little-cl-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 22>;
 			status = "disabled";
 		};
 
-		gpu0_thermal_zone: gpu0 {
+		gpu0_thermal_zone: gpu0-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 23>;
 			status = "disabled";
 		};
 
-		gpu1_thermal_zone: gpu1 {
+		gpu1_thermal_zone: gpu1-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 24>;
diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
index 2870b5eeb198..6d7d88e9591a 100644
--- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
@@ -8,35 +8,35 @@
  */
 / {
 	/* SoC fixed clocks */
-	soc_uartclk: refclk7372800hz {
+	soc_uartclk: clock-7372800 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <7372800>;
 		clock-output-names = "juno:uartclk";
 	};
 
-	soc_usb48mhz: clk48mhz {
+	soc_usb48mhz: clock-48000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 		clock-output-names = "clk48mhz";
 	};
 
-	soc_smc50mhz: clk50mhz {
+	soc_smc50mhz: clock-50000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 		clock-output-names = "smc_clk";
 	};
 
-	soc_refclk100mhz: refclk100mhz {
+	soc_refclk100mhz: clock-100000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "apb_pclk";
 	};
 
-	soc_faxiclk: refclk400mhz {
+	soc_faxiclk: clock-400000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <400000000>;
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index be42932f7e21..ffa4ba4f1fbc 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -8,35 +8,35 @@
  */
 
 / {
-	mb_clk24mhz: clk24mhz {
+	mb_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "juno_mb:clk24mhz";
 	};
 
-	mb_clk25mhz: clk25mhz {
+	mb_clk25mhz: clock-25000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 		clock-output-names = "juno_mb:clk25mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "juno_mb:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "juno_mb:refclk32khz";
 	};
 
-	mb_fixed_3v3: mcc-sb-3v3 {
+	mb_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "MCC_SB_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -158,7 +158,8 @@
 				};
 
 				apbregs@10000 {
-					compatible = "syscon", "simple-mfd";
+					compatible = "arm,juno-fpga-apb-regs",
+						     "syscon", "simple-mfd";
 					reg = <0x010000 0x1000>;
 					ranges = <0x0 0x10000 0x1000>;
 					#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
index ec85cd2c733c..f38c5b6ef657 100644
--- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
@@ -76,27 +76,27 @@
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			thermal-sensors = <&scmi_sensors0 0>;
 		};
 
-		soc {
+		soc-thermal {
 			thermal-sensors = <&scmi_sensors0 3>;
 		};
 
-		big-cluster {
+		big-cl-thermal {
 			thermal-sensors = <&scmi_sensors0 21>;
 		};
 
-		little-cluster {
+		little-cl-thermal {
 			thermal-sensors = <&scmi_sensors0 22>;
 		};
 
-		gpu0 {
+		gpu0-thermal {
 			thermal-sensors = <&scmi_sensors0 23>;
 		};
 
-		gpu1 {
+		gpu1-thermal {
 			thermal-sensors = <&scmi_sensors0 24>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/arm/morello-fvp.dts b/arch/arm64/boot/dts/arm/morello-fvp.dts
new file mode 100644
index 000000000000..2072c0b72325
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/morello-fvp.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021-2024, Arm Limited. All rights reserved.
+ */
+
+/dts-v1/;
+#include "morello.dtsi"
+
+/ {
+	model = "Arm Morello Fixed Virtual Platform";
+	compatible = "arm,morello-fvp", "arm,morello";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	bp_refclock24mhz: clock-24000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "bp:clock24mhz";
+	};
+
+	block_0: virtio_block@1c170000 {
+		compatible = "virtio,mmio";
+		reg = <0x0 0x1c170000 0x0 0x200>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	net_0: virtio_net@1c180000 {
+		compatible = "virtio,mmio";
+		reg = <0x0 0x1c180000 0x0 0x200>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	rng_0: virtio_rng@1c190000 {
+		compatible = "virtio,mmio";
+		reg = <0x0 0x1c190000 0x0 0x200>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	p9_0: virtio_p9@1c1a0000 {
+		compatible = "virtio,mmio";
+		reg = <0x0 0x1c1a0000 0x0 0x200>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	kmi_0: kmi@1c150000 {
+		compatible = "arm,pl050", "arm,primecell";
+		reg = <0x0 0x1c150000 0x0 0x1000>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bp_refclock24mhz>, <&bp_refclock24mhz>;
+		clock-names = "KMIREFCLK", "apb_pclk";
+	};
+
+	kmi_1: kmi@1c160000 {
+		compatible = "arm,pl050", "arm,primecell";
+		reg = <0x0 0x1c160000 0x0 0x1000>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bp_refclock24mhz>, <&bp_refclock24mhz>;
+		clock-names = "KMIREFCLK", "apb_pclk";
+	};
+
+	eth_0: ethernet@1d100000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x0 0x1d100000 0x0 0x10000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/arm/morello-sdp.dts b/arch/arm64/boot/dts/arm/morello-sdp.dts
new file mode 100644
index 000000000000..cee49dee7571
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/morello-sdp.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021-2024, Arm Limited. All rights reserved.
+ */
+
+/dts-v1/;
+#include "morello.dtsi"
+
+/ {
+	model = "Arm Morello System Development Platform";
+	compatible = "arm,morello-sdp", "arm,morello";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dpu_aclk: clock-350000000 {
+		/* 77.1 MHz derived from 24 MHz reference clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <350000000>;
+		clock-output-names = "aclk";
+	};
+
+	dpu_pixel_clk: clock-148500000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+		clock-output-names = "pxclk";
+	};
+
+	i2c0: i2c@1c0f0000 {
+		compatible = "cdns,i2c-r1p14";
+		reg = <0x0 0x1c0f0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&dpu_aclk>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clock-frequency = <100000>;
+
+		hdmi_tx: hdmi-transmitter@70 {
+			compatible = "nxp,tda998x";
+			reg = <0x70>;
+			video-ports = <0x234501>;
+			port {
+				tda998x_0_input: endpoint {
+					remote-endpoint = <&dp_pl0_out0>;
+				};
+			};
+		};
+	};
+
+	dp0: display@2cc00000 {
+		compatible = "arm,mali-d32", "arm,mali-d71";
+		reg = <0x0 0x2cc00000 0x0 0x20000>;
+		interrupts = <0 69 4>;
+		clocks = <&dpu_aclk>;
+		clock-names = "aclk";
+		iommus = <&smmu_dp 0>, <&smmu_dp 1>, <&smmu_dp 2>, <&smmu_dp 3>,
+			 <&smmu_dp 8>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pl0: pipeline@0 {
+			reg = <0>;
+			clocks = <&dpu_pixel_clk>;
+			clock-names = "pxclk";
+			port {
+				dp_pl0_out0: endpoint {
+					remote-endpoint = <&tda998x_0_input>;
+				};
+			};
+		};
+	};
+
+	smmu_ccix: iommu@4f000000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0x4f000000 0x0 0x40000>;
+
+		interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 230 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+		msi-parent = <&its1 0>;
+		#iommu-cells = <1>;
+		dma-coherent;
+	};
+
+	smmu_pcie: iommu@4f400000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0x4f400000 0x0 0x40000>;
+
+		interrupts = <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 237 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+		msi-parent = <&its2 0>;
+		#iommu-cells = <1>;
+		dma-coherent;
+	};
+
+	pcie_ctlr: pcie@28c0000000 {
+		device_type = "pci";
+		compatible = "pci-host-ecam-generic";
+		reg = <0x28 0xC0000000 0 0x10000000>;
+		ranges = <0x01000000 0x00 0x00000000 0x00 0x6f000000 0x00 0x00800000>,
+				<0x02000000 0x00 0x60000000 0x00 0x60000000 0x00 0x0f000000>,
+				<0x42000000 0x09 0x00000000 0x09 0x00000000 0x1f 0xc0000000>;
+		bus-range = <0 255>;
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		dma-coherent;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 0 0 170 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 0 0 171 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 0 0 172 IRQ_TYPE_LEVEL_HIGH>;
+		msi-map = <0 &its_pcie 0 0x10000>;
+		iommu-map = <0 &smmu_pcie 0 0x10000>;
+	};
+
+	ccix_pcie_ctlr: pcie@4fc0000000 {
+		device_type = "pci";
+		compatible = "pci-host-ecam-generic";
+		reg = <0x4f 0xC0000000 0 0x10000000>;
+		ranges = <0x01000000 0x00 0x00000000 0x00 0x7f000000 0x00 0x00800000>,
+				<0x02000000 0x00 0x70000000 0x00 0x70000000 0x00 0x0f000000>,
+				<0x42000000 0x30 0x00000000 0x30 0x00000000 0x1f 0xc0000000>;
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		dma-coherent;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &gic 0 0 0 201 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 0 0 202 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 0 0 203 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 0 0 204 IRQ_TYPE_LEVEL_HIGH>;
+		msi-map = <0 &its_ccix 0 0x10000>;
+		iommu-map = <0 &smmu_ccix 0 0x10000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/arm/morello.dtsi b/arch/arm64/boot/dts/arm/morello.dtsi
new file mode 100644
index 000000000000..5bc1c725dc86
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/morello.dtsi
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2024, Arm Limited. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc_refclk50mhz: clock-50000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "apb_pclk";
+	};
+
+	soc_refclk85mhz: clock-85000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <85000000>;
+		clock-output-names = "iofpga:aclk";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,rainier";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			/* 4 ways set associative */
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_0>;
+			clocks = <&scmi_dvfs 0>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				/* 8 ways set associative */
+				cache-size = <0x100000>;
+				cache-line-size = <64>;
+				cache-sets = <2048>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,rainier";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			/* 4 ways set associative */
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_1>;
+			clocks = <&scmi_dvfs 0>;
+
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				/* 8 ways set associative */
+				cache-size = <0x100000>;
+				cache-line-size = <64>;
+				cache-sets = <2048>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@10000 {
+			compatible = "arm,rainier";
+			reg = <0x0 0x10000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			/* 4 ways set associative */
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_2>;
+			clocks = <&scmi_dvfs 1>;
+
+			l2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				/* 8 ways set associative */
+				cache-size = <0x100000>;
+				cache-line-size = <64>;
+				cache-sets = <2048>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@10100 {
+			compatible = "arm,rainier";
+			reg = <0x0 0x10100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			/* 4 ways set associative */
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_3>;
+			clocks = <&scmi_dvfs 1>;
+
+			l2_3: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				/* 8 ways set associative */
+				cache-size = <0x100000>;
+				cache-line-size = <64>;
+				cache-sets = <2048>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <0x100000>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		interrupt-parent = <&gic>;
+
+		scmi {
+			compatible = "arm,scmi";
+			mbox-names = "tx", "rx";
+			mboxes = <&mailbox 1 0>, <&mailbox 1 1>;
+			shmem = <&cpu_scp_hpri0>, <&cpu_scp_hpri1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_dvfs: protocol@13 {
+				reg = <0x13>;
+				#clock-cells = <1>;
+			};
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	/* The first bank of memory, memory map is actually provided by UEFI. */
+	memory@80000000 {
+		device_type = "memory";
+		/* [0x80000000-0xffffffff] */
+		reg = <0x00000000 0x80000000 0x0 0x7f000000>;
+	};
+
+	memory@8080000000 {
+		device_type = "memory";
+		/* [0x8080000000-0x83f7ffffff] */
+		reg = <0x00000080 0x80000000 0x3 0x78000000>;
+	};
+
+	pmu {
+		compatible = "arm,rainier-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure-firmware@ff000000 {
+			reg = <0x0 0xff000000 0x0 0x01000000>;
+			no-map;
+		};
+	};
+
+	spe-pmu {
+		compatible = "arm,statistical-profiling-extension-v1";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		uart0: serial@2a400000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x2a400000 0x0 0x1000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&soc_refclk50mhz>, <&soc_refclk50mhz>;
+			clock-names = "uartclk", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@30000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x30000000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x300c0000 0x0 0x80000>;	/* GICR */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			its1: msi-controller@30040000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x30040000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+
+			its2: msi-controller@30060000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x30060000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+
+			its_ccix: msi-controller@30080000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x30080000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+
+			its_pcie: msi-controller@300a0000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x300a0000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		smmu_dp: iommu@2ce00000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x0 0x2ce00000 0x0 0x40000>;
+
+			interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror", "cmdq-sync";
+			#iommu-cells = <1>;
+		};
+
+		mailbox: mhu@45000000 {
+			compatible = "arm,mhu-doorbell", "arm,primecell";
+			reg = <0x0 0x45000000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			clocks = <&soc_refclk50mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		sram: sram@6000000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0x06000000 0x0 0x8000>;
+			ranges = <0 0x0 0x06000000 0x8000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cpu_scp_hpri0: scp-sram@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0x0 0x80>;
+			};
+
+			cpu_scp_hpri1: scp-sram@80 {
+				compatible = "arm,scmi-shmem";
+				reg = <0x80 0x80>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index afdf954206f1..a4a29193d4eb 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -23,7 +23,9 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	chosen { };
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
 	aliases {
 		serial0 = &v2m_serial0;
@@ -114,7 +116,6 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <100000000>;
 	};
 
 	pmu {
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index ba8beef3fe99..66b1b74d27dc 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -8,28 +8,28 @@
  * VEMotherBoard.lisa
  */
 / {
-	v2m_clk24mhz: clk24mhz {
+	v2m_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "v2m:clk24mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "v2m:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "v2m:refclk32khz";
 	};
 
-	v2m_fixed_3v3: v2m-3v3 {
+	v2m_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
 		regulator-min-microvolt = <3300000>;
@@ -41,7 +41,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		v2m_oscclk1: oscclk1 {
+		v2m_oscclk1: clock-controller {
 			/* CLCD clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index 8db4243a4947..a0e1fa83eafa 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -102,7 +102,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 	};
@@ -111,7 +111,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		smbclk: smclk {
+		smbclk: clock-controller {
 			/* SMC clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -120,7 +120,7 @@
 			clock-output-names = "smclk";
 		};
 
-		volt-vio {
+		regulator-vio {
 			/* VIO to expansion board above */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -130,7 +130,7 @@
 			regulator-always-on;
 		};
 
-		volt-12v {
+		regulator-12v {
 			/* 12V from power connector J6 */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
diff --git a/arch/arm64/boot/dts/axiado/Makefile b/arch/arm64/boot/dts/axiado/Makefile
new file mode 100644
index 000000000000..6676ad07db61
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AXIADO) += ax3000-evk.dtb
diff --git a/arch/arm64/boot/dts/axiado/ax3000-evk.dts b/arch/arm64/boot/dts/axiado/ax3000-evk.dts
new file mode 100644
index 000000000000..b86e96962557
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/ax3000-evk.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ax3000.dtsi"
+
+/ {
+	model = "Axiado AX3000 EVK";
+	compatible = "axiado,ax3000-evk", "axiado,ax3000";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* Cortex-A53 will use following memory map */
+		reg = <0x00000000 0x3d000000 0x00000000 0x23000000>,
+		      <0x00000004 0x00000000 0x00000000 0x80000000>;
+	};
+};
+
+/* GPIO bank 0 - 7 */
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&gpio6 {
+	status = "okay";
+};
+
+&gpio7 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/axiado/ax3000.dtsi b/arch/arm64/boot/dts/axiado/ax3000.dtsi
new file mode 100644
index 000000000000..792f52e0c7dd
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/ax3000.dtsi
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x3c0013a0 0x00000008;	/* cpu-release-addr */
+/ {
+	model = "Axiado AX3000";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-unified;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		clk_xin: clock-200000000 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+			clock-output-names = "clk_xin";
+		};
+
+		refclk: clock-125000000 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic500>;
+
+		gic500: interrupt-controller@80300000 {
+			compatible = "arm,gic-v3";
+			reg = <0x00 0x80300000 0x00 0x10000>,
+			      <0x00 0x80380000 0x00 0x80000>;
+			ranges;
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		/* GPIO Controller banks 0 - 7 */
+		gpio0: gpio-controller@80500000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80500000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio1: gpio-controller@80580000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80580000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio2: gpio-controller@80600000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80600000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio3: gpio-controller@80680000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80680000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio4: gpio-controller@80700000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80700000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio5: gpio-controller@80780000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80780000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio6: gpio-controller@80800000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80800000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio7: gpio-controller@80880000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80880000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		/* I3C Controller 0 - 16 */
+		i3c0: i3c@80500400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80500400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c1: i3c@80500800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80500800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c2: i3c@80580400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80580400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c3: i3c@80580800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80580800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c4: i3c@80600400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80600400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c5: i3c@80600800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80600800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c6: i3c@80680400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80680400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c7: i3c@80680800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80680800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c8: i3c@80700400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80700400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c9: i3c@80700800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80700800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c10: i3c@80780400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80780400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c11: i3c@80780800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80780800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c12: i3c@80800400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80800400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c13: i3c@80800800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80800800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c14: i3c@80880400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80880400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c15: i3c@80880800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80880800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c16: i3c@80620400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80620400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		uart0: serial@80520000 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x80520000 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+
+		uart1: serial@805a0000 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x805A0000 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+
+		uart2: serial@80620000 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x80620000 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+
+		uart3: serial@80520800 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x80520800 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			   <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			   <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			   <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/blaize/Makefile b/arch/arm64/boot/dts/blaize/Makefile
new file mode 100644
index 000000000000..7e10b3199e6c
--- /dev/null
+++ b/arch/arm64/boot/dts/blaize/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0+
+dtb-$(CONFIG_ARCH_BLAIZE) += blaize-blzp1600-cb2.dtb
diff --git a/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts b/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
new file mode 100644
index 000000000000..fb5415eb347a
--- /dev/null
+++ b/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Blaize, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "blaize-blzp1600-som.dtsi"
+
+/ {
+	model = "Blaize BLZP1600 SoM1600P CB2 Development Board";
+
+	compatible = "blaize,blzp1600-cb2", "blaize,blzp1600";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	gpio_expander: gpio@74 {
+		compatible = "ti,tca9539";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "RSP_PIN_7",	/* GPIO_0 */
+				  "RSP_PIN_11",	/* GPIO_1 */
+				  "RSP_PIN_13",	/* GPIO_2 */
+				  "RSP_PIN_15",	/* GPIO_3 */
+				  "RSP_PIN_27",	/* GPIO_4 */
+				  "RSP_PIN_29",	/* GPIO_5 */
+				  "RSP_PIN_31",	/* GPIO_6 */
+				  "RSP_PIN_33",	/* GPIO_7 */
+				  "RSP_PIN_37",	/* GPIO_8 */
+				  "RSP_PIN_16",	/* GPIO_9 */
+				  "RSP_PIN_18",	/* GPIO_10 */
+				  "RSP_PIN_22",	/* GPIO_11 */
+				  "RSP_PIN_28",	/* GPIO_12 */
+				  "RSP_PIN_32",	/* GPIO_13 */
+				  "RSP_PIN_36",	/* GPIO_14 */
+				  "TP31";	/* GPIO_15 */
+	};
+
+	gpio_expander_m2: gpio@75 {
+		compatible = "ti,tca9539";
+		reg = <0x75>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "M2_W_DIS1_N",	/* GPIO_0 */
+				  "M2_W_DIS2_N",	/* GPIO_1 */
+				  "M2_UART_WAKE_N",	/* GPIO_2 */
+				  "M2_COEX3",		/* GPIO_3 */
+				  "M2_COEX_RXD",	/* GPIO_4 */
+				  "M2_COEX_TXD",	/* GPIO_5 */
+				  "M2_VENDOR_PIN40",	/* GPIO_6 */
+				  "M2_VENDOR_PIN42",	/* GPIO_7 */
+				  "M2_VENDOR_PIN38",	/* GPIO_8 */
+				  "M2_SDIO_RST_N",	/* GPIO_9 */
+				  "M2_SDIO_WAKE_N",	/* GPIO_10 */
+				  "M2_PETN1",		/* GPIO_11 */
+				  "M2_PERP1",		/* GPIO_12 */
+				  "M2_PERN1",		/* GPIO_13 */
+				  "UIM_SWP",		/* GPIO_14 */
+				  "UART1_TO_RSP";	/* GPIO_15 */
+	};
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names = "PERST_N",		/* GPIO_0 */
+			  "LM96063_ALERT_N",	/* GPIO_1 */
+			  "INA3221_PV",		/* GPIO_2 */
+			  "INA3221_CRIT",	/* GPIO_3 */
+			  "INA3221_WARN",	/* GPIO_4 */
+			  "INA3221_TC",		/* GPIO_5 */
+			  "QSPI0_RST_N",	/* GPIO_6 */
+			  "LM96063_TCRIT_N",	/* GPIO_7 */
+			  "DSI_TCH_INT",	/* GPIO_8 */
+			  "DSI_RST",		/* GPIO_9 */
+			  "DSI_BL",		/* GPIO_10 */
+			  "DSI_INT",		/* GPIO_11 */
+			  "ETH_RST",		/* GPIO_12 */
+			  "CSI0_RST",		/* GPIO_13 */
+			  "CSI0_PWDN",		/* GPIO_14 */
+			  "CSI1_RST",		/* GPIO_15 */
+			  "CSI1_PWDN",		/* GPIO_16 */
+			  "CSI2_RST",		/* GPIO_17 */
+			  "CSI2_PWDN",		/* GPIO_18 */
+			  "CSI3_RST",		/* GPIO_19 */
+			  "CSI3_PWDN",		/* GPIO_20 */
+			  "ADAC_RST",		/* GPIO_21 */
+			  "SD_SW_VDD",		/* GPIO_22 */
+			  "SD_PON_VDD",		/* GPIO_23 */
+			  "GPIO_EXP_INT",	/* GPIO_24 */
+			  "BOARD_ID_0",		/* GPIO_25 */
+			  "SDIO1_SW_VDD",	/* GPIO_26 */
+			  "SDIO1_PON_VDD",	/* GPIO_27 */
+			  "SDIO2_SW_VDD",	/* GPIO_28 */
+			  "SDIO2_PON_VDD",	/* GPIO_29 */
+			  "BOARD_ID_1",		/* GPIO_30 */
+			  "BOARD_ID_2";		/* GPIO_31 */
+};
diff --git a/arch/arm64/boot/dts/blaize/blaize-blzp1600-som.dtsi b/arch/arm64/boot/dts/blaize/blaize-blzp1600-som.dtsi
new file mode 100644
index 000000000000..bfdff5953edd
--- /dev/null
+++ b/arch/arm64/boot/dts/blaize/blaize-blzp1600-som.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Blaize, Inc. All rights reserved.
+ */
+
+#include "blaize-blzp1600.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x1 0x0>;
+	};
+};
+
+/* i2c4 bus is available only on the SoM, not on the board */
+&i2c4 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi b/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
new file mode 100644
index 000000000000..5a6c882b2f57
--- /dev/null
+++ b/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Blaize, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x82002000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			shmem = <&scmi0_shm>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_rst: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* SCMI reserved buffer space on DDR space */
+		scmi0_shm: scmi-shmem@800 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x800 0x0 0x80>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = /* Physical Secure PPI */
+			     <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     /* Physical Non-Secure PPI */
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     /* Hypervisor PPI */
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     /* Virtual PPI */
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc@200000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x2 0x0 0x850000>;
+
+		gic: interrupt-controller@410000 {
+			compatible = "arm,gic-400";
+			reg = <0x410000 0x20000>,
+			      <0x420000 0x20000>,
+			      <0x440000 0x20000>,
+			      <0x460000 0x20000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0x3) |
+						 IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		gpio0: gpio@4c0000 {
+			compatible = "blaize,blzp1600-gpio";
+			reg = <0x4c0000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <32>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		uart0: serial@4d0000 {
+			compatible = "ns16550a";
+			reg = <0x4d0000 0x1000>;
+			clocks = <&scmi_clk 59>;
+			resets = <&scmi_rst 59>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@4e0000 {
+			compatible = "ns16550a";
+			reg = <0x4e0000 0x1000>;
+			clocks = <&scmi_clk 60>;
+			resets = <&scmi_rst 60>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@4f0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x4f0000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 54>;
+			resets = <&scmi_rst 54>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@500000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x500000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 55>;
+			resets = <&scmi_rst 55>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@510000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x510000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 56>;
+			resets = <&scmi_rst 56>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@520000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x520000 0x1000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 57>;
+			resets = <&scmi_rst 57>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@530000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x530000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 58>;
+			resets = <&scmi_rst 58>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		arm_cc712: crypto@550000 {
+			compatible = "arm,cryptocell-712-ree";
+			reg = <0x550000 0x1000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 7>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 8b4591ddd27c..83d45afc6588 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -6,11 +6,16 @@ DTC_FLAGS := -@
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2711-rpi-4-b.dtb \
 			      bcm2711-rpi-cm4-io.dtb \
+			      bcm2712-rpi-5-b.dtb \
+			      bcm2712-rpi-5-b-ovl-rp1.dtb \
+			      bcm2712-d-rpi-5-b.dtb \
+			      bcm2837-rpi-2-b.dtb \
 			      bcm2837-rpi-3-a-plus.dtb \
 			      bcm2837-rpi-3-b.dtb \
 			      bcm2837-rpi-3-b-plus.dtb \
 			      bcm2837-rpi-cm3-io3.dtb \
-			      bcm2837-rpi-zero-2-w.dtb
+			      bcm2837-rpi-zero-2-w.dtb \
+			      rp1.dtbo
 
 subdir-y	+= bcmbca
 subdir-y	+= northstar2
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts
new file mode 100644
index 000000000000..7de24d60bcd1
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include "bcm2712-rpi-5-b.dts"
+
+&gio_aon {
+	brcm,gpio-bank-widths = <15 6>;
+
+	gpio-line-names =
+		"RP1_SDA", // AON_GPIO_00
+		"RP1_SCL", // AON_GPIO_01
+		"RP1_RUN", // AON_GPIO_02
+		"SD_IOVDD_SEL", // AON_GPIO_03
+		"SD_PWR_ON", // AON_GPIO_04
+		"SD_CDET_N", // AON_GPIO_05
+		"SD_FLG_N", // AON_GPIO_06
+		"", // AON_GPIO_07
+		"2712_WAKE", // AON_GPIO_08
+		"2712_STAT_LED", // AON_GPIO_09
+		"", // AON_GPIO_10
+		"", // AON_GPIO_11
+		"PMIC_INT", // AON_GPIO_12
+		"UART_TX_FS", // AON_GPIO_13
+		"UART_RX_FS", // AON_GPIO_14
+		"", // AON_GPIO_15
+		"", // AON_GPIO_16
+
+		// Pad bank0 out to 32 entries
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "", "",
+
+		"HDMI0_SCL", // AON_SGPIO_00
+		"HDMI0_SDA", // AON_SGPIO_01
+		"HDMI1_SCL", // AON_SGPIO_02
+		"HDMI1_SDA", // AON_SGPIO_03
+		"PMIC_SCL", // AON_SGPIO_04
+		"PMIC_SDA"; // AON_SGPIO_05
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
new file mode 100644
index 000000000000..04738bf281eb
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "bcm2712.dtsi"
+
+/ {
+	compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
+	model = "Raspberry Pi 5";
+
+	aliases {
+		serial10 = &uart10;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial10:115200n8";
+	};
+
+	clk_rp1_xosc: clock-50000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "rp1-xosc";
+		clock-frequency = <50000000>;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0 0x28000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_button_default>;
+		status = "okay";
+
+		power_button: power-button {
+			label = "pwr_button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gio 20 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+		};
+	};
+
+	sd_io_1v8_reg: sd-io-1v8-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>;
+		states = <1800000 1>,
+			 <3300000 0>;
+	};
+
+	sd_vcc_reg: sd-vcc-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	wl_on_reg: wl-on-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "wl-on-regulator";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-0 = <&wl_on_default>;
+		pinctrl-names = "default";
+		gpio = <&gio 28 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <150000>;
+		enable-active-high;
+	};
+};
+
+&pinctrl {
+	bt_shutdown_default: bt-shutdown-default-state {
+		function = "gpio";
+		pins = "gpio29";
+	};
+
+	emmc_sd_default: emmc-sd-default-state {
+		pins = "emmc_cmd", "emmc_dat0", "emmc_dat1", "emmc_dat2", "emmc_dat3";
+		bias-pull-up;
+	};
+
+	pwr_button_default: pwr-button-default-state {
+		function = "gpio";
+		pins = "gpio20";
+		bias-pull-up;
+	};
+
+	sdio2_30_default: sdio2-30-default-state {
+		clk-pins {
+			function = "sd2";
+			pins = "gpio30";
+			bias-disable;
+		};
+		cmd-pins {
+			function = "sd2";
+			pins = "gpio31";
+			bias-pull-up;
+		};
+		dat-pins {
+			function = "sd2";
+			pins = "gpio32", "gpio33", "gpio34", "gpio35";
+			bias-pull-up;
+		};
+	};
+
+	uarta_24_default: uarta-24-default-state {
+		rts-pins {
+			function = "uart0";
+			pins = "gpio24";
+			bias-disable;
+		};
+		cts-pins {
+			function = "uart0";
+			pins = "gpio25";
+			bias-pull-up;
+		};
+		txd-pins {
+			function = "uart0";
+			pins = "gpio26";
+			bias-disable;
+		};
+		rxd-pins {
+			function = "uart0";
+			pins = "gpio27";
+			bias-pull-up;
+		};
+	};
+
+	wl_on_default: wl-on-default-state {
+		function = "gpio";
+		pins = "gpio28";
+	};
+};
+
+&pinctrl_aon {
+	emmc_aon_cd_default: emmc-aon-cd-default-state {
+		function = "sd_card_g";
+		pins = "aon_gpio5";
+		bias-pull-up;
+	};
+};
+
+/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector
+ * labeled "UART", i.e. the interface with the system console.
+ */
+&uart10 {
+	status = "okay";
+};
+
+/* SDIO1 is used to drive the SD card */
+&sdio1 {
+	pinctrl-0 = <&emmc_sd_default>, <&emmc_aon_cd_default>;
+	pinctrl-names = "default";
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	cd-gpios = <&gio_aon 5 GPIO_ACTIVE_LOW>;
+};
+
+&sdio2 {
+	pinctrl-0 = <&sdio2_30_default>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	vmmc-supply = <&wl_on_reg>;
+	sd-uhs-ddr50;
+	non-removable;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&soc {
+	firmware: firmware {
+		compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mboxes = <&mailbox>;
+		dma-ranges;
+
+		firmware_clocks: clocks {
+			compatible = "raspberrypi,firmware-clocks";
+			#clock-cells = <1>;
+		};
+
+		reset: reset {
+			compatible = "raspberrypi,firmware-reset";
+			#reset-cells = <1>;
+		};
+	};
+
+	power: power {
+		compatible = "raspberrypi,bcm2835-power";
+		firmware = <&firmware>;
+		#power-domain-cells = <1>;
+	};
+};
+
+/* uarta communicates with the BT module */
+&uarta {
+	uart-has-rtscts;
+	pinctrl-0 = <&uarta_24_default &bt_shutdown_default>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gio 29 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&hvs {
+	clocks = <&firmware_clocks 4>, <&firmware_clocks 16>;
+	clock-names = "core", "disp";
+};
+
+&hdmi0 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+};
+
+&hdmi1 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
new file mode 100644
index 000000000000..b8f256545022
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * bcm2712-rpi-5-b-ovl-rp1.dts is the overlay-ready DT which will make
+ * the RP1 driver to load the RP1 dtb overlay at runtime, while
+ * bcm2712-rpi-5-b.dts (this file) is the fully defined one (i.e. it
+ * already contains RP1 node, so no overlay is loaded nor needed).
+ * This file is intended to host the override nodes for the RP1 peripherals,
+ * e.g. to declare the phy of the ethernet interface or the custom pin setup
+ * for several RP1 peripherals.
+ * This in turn is due to the fact that there's no current generic
+ * infrastructure to reference nodes (i.e. the nodes in rp1-common.dtsi) that
+ * are not yet defined in the DT since they are loaded at runtime via overlay.
+ * All other nodes that do not have anything to do with RP1 should be added
+ * to the included bcm2712-rpi-5-b-ovl-rp1.dts instead.
+ */
+
+/dts-v1/;
+
+#include "bcm2712-rpi-5-b-ovl-rp1.dts"
+
+&pcie2 {
+	#include "rp1-nexus.dtsi"
+};
+
+&rp1_eth {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+
+	mdio {
+		reg = <0x1>;
+		reset-gpios = <&rp1_gpio 32 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <5000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+	};
+};
+
+&rp1_gpio {
+	usb_vbus_default_state: usb-vbus-default-state {
+		function = "vbus1";
+		groups = "vbus1";
+	};
+};
+
+&rp1_usb0 {
+	pinctrl-0 = <&usb_vbus_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rp1_usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
new file mode 100644
index 000000000000..e77a66adc22a
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -0,0 +1,669 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm2712";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gicv2>;
+
+	clocks {
+		/* The oscillator is the root of the clock tree. */
+		clk_osc: clk-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "osc";
+			clock-frequency = <54000000>;
+		};
+
+		clk_vpu: clk-vpu {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <750000000>;
+			clock-output-names = "vpu-clock";
+		};
+
+		clk_uart: clk-uart {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <9216000>;
+			clock-output-names = "uart-clock";
+		};
+
+		clk_emmc2: clk-emmc2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+			clock-output-names = "emmc2-clock";
+		};
+
+		clk_sw_baud: clk-sw-baud {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <96000000>;
+			clock-output-names = "sw-baud";
+		};
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Source for L1 d/i cache-line-size, cache-sets, cache-size
+		 * https://developer.arm.com/documentation/100798/0401/L1-memory-system/About-the-L1-memory-system?lang=en
+		 * Source for L2 cache-line-size and cache-sets:
+		 * https://developer.arm.com/documentation/100798/0401/L2-memory-system/About-the-L2-memory-system?lang=en
+		 * and for cache-size:
+		 * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x000>;
+			enable-method = "psci";
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			next-level-cache = <&l2_cache_l0>;
+
+			l2_cache_l0: l2-cache {
+				compatible = "cache";
+				cache-size = <0x80000>;
+				cache-line-size = <64>;
+				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_cache>;
+			};
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x100>;
+			enable-method = "psci";
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			next-level-cache = <&l2_cache_l1>;
+
+			l2_cache_l1: l2-cache {
+				compatible = "cache";
+				cache-size = <0x80000>;
+				cache-line-size = <64>;
+				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_cache>;
+			};
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x200>;
+			enable-method = "psci";
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			next-level-cache = <&l2_cache_l2>;
+
+			l2_cache_l2: l2-cache {
+				compatible = "cache";
+				cache-size = <0x80000>;
+				cache-line-size = <64>;
+				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_cache>;
+			};
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x300>;
+			enable-method = "psci";
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			next-level-cache = <&l2_cache_l3>;
+
+			l2_cache_l3: l2-cache {
+				compatible = "cache";
+				cache-size = <0x80000>;
+				cache-line-size = <64>;
+				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_cache>;
+			};
+		};
+
+		/* Source for cache-line-size and cache-sets:
+		 * https://developer.arm.com/documentation/100453/0401/L3-cache?lang=en
+		 * Source for cache-size:
+		 * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712
+		 */
+		l3_cache: l3-cache {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>; // 2MiB(size)/64(line-size)=32768ways/16-way set
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		method = "smc";
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+	};
+
+	rmem: reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		atf@0 {
+			reg = <0x0 0x0 0x0 0x80000>;
+			no-map;
+		};
+
+		cma: linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x4000000>; /* 64MB */
+			reusable;
+			linux,cma-default;
+			alloc-ranges = <0x0 0x00000000 0x0 0x40000000>;
+		};
+	};
+
+	soc: soc@107c000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000  0x10 0x00000000  0x80000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pcie_rescal: reset-controller@119500 {
+			compatible = "brcm,bcm7216-pcie-sata-rescal";
+			reg = <0x00119500 0x10>;
+			#reset-cells = <0>;
+		};
+
+		sdio1: mmc@fff000 {
+			compatible = "brcm,bcm2712-sdhci",
+				     "brcm,sdhci-brcmstb";
+			reg = <0x00fff000 0x260>,
+			      <0x00fff400 0x200>;
+			reg-names = "host", "cfg";
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_emmc2>;
+			clock-names = "sw_sdio";
+			mmc-ddr-3_3v;
+		};
+
+		bcm_reset: reset-controller@1504318 {
+			compatible = "brcm,brcmstb-reset";
+			reg = <0x01504318 0x30>;
+			#reset-cells = <1>;
+		};
+
+		system_timer: timer@7c003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7c003000 0x1000>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <1000000>;
+		};
+
+		mailbox: mailbox@7c013880 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7c013880 0x40>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <0>;
+		};
+
+		uart10: serial@7d001000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7d001000 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_uart>, <&clk_vpu>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00341011>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@7d504100 {
+			compatible = "brcm,bcm2712c0-pinctrl";
+			reg = <0x7d504100 0x30>;
+		};
+
+		gio: gpio@7d508500 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x7d508500 0x40>;
+			interrupt-parent = <&main_irq>;
+			interrupts = <0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			brcm,gpio-bank-widths = <32 22>;
+		};
+
+		uarta: serial@7d50c000 {
+			compatible = "brcm,bcm7271-uart";
+			reg = <0x7d50c000 0x20>;
+			reg-names = "uart";
+			clocks = <&clk_sw_baud>;
+			clock-names = "sw_baud";
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart";
+			status = "disabled";
+		};
+
+		pinctrl_aon: pinctrl@7d510700 {
+			compatible = "brcm,bcm2712c0-aon-pinctrl";
+			reg = <0x7d510700 0x20>;
+		};
+
+		interrupt-controller@7d517000 {
+			compatible = "brcm,bcm7271-l2-intc";
+			reg = <0x7d517000 0x10>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gio_aon: gpio@7d517c00 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x7d517c00 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			brcm,gpio-bank-widths = <17 6>;
+			/* The lack of 'interrupt-controller' property here is intended:
+			 * don't use GIO_AON as an interrupt controller because it will
+			 * clash with the firmware monitoring the PMIC interrupt via the VPU.
+			 */
+		};
+
+		sdio2: mmc@1100000 {
+			compatible = "brcm,bcm2712-sdhci",
+				     "brcm,sdhci-brcmstb";
+			reg = <0x01100000  0x260>,
+			      <0x01100400  0x200>;
+			reg-names = "host", "cfg";
+			interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_emmc2>;
+			clock-names = "sw_sdio";
+			sdhci-caps-mask = <0x0000C000 0x0>;
+			sdhci-caps = <0x0 0x0>;
+			mmc-ddr-3_3v;
+			status = "disabled";
+		};
+
+		gicv2: interrupt-controller@7fff9000 {
+			compatible = "arm,gic-400";
+			reg = <0x7fff9000 0x1000>,
+			      <0x7fffa000 0x2000>,
+			      <0x7fffc000 0x2000>,
+			      <0x7fffe000 0x2000>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <3>;
+		};
+
+		aon_intr: interrupt-controller@7d510600 {
+			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+			reg = <0x7d510600 0x30>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pixelvalve0: pixelvalve@7c410000 {
+			compatible = "brcm,bcm2712-pixelvalve0";
+			reg = <0x7c410000 0x100>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pixelvalve1: pixelvalve@7c411000 {
+			compatible = "brcm,bcm2712-pixelvalve1";
+			reg = <0x7c411000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		mop: mop@7c500000 {
+			compatible = "brcm,bcm2712-mop";
+			reg = <0x7c500000 0x28>;
+			interrupt-parent = <&disp_intr>;
+			interrupts = <1>;
+		};
+
+		moplet: moplet@7c501000 {
+			compatible = "brcm,bcm2712-moplet";
+			reg = <0x7c501000 0x20>;
+			interrupt-parent = <&disp_intr>;
+			interrupts = <0>;
+		};
+
+		disp_intr: interrupt-controller@7c502000 {
+			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+			reg = <0x7c502000 0x30>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		dvp: clock@7c700000 {
+			compatible = "brcm,brcm2711-dvp";
+			reg = <0x7c700000 0x10>;
+			clocks = <&clk_108MHz>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ddc0: i2c@7d508200 {
+			compatible = "brcm,brcmstb-i2c";
+			reg = <0x7d508200 0x58>;
+			interrupt-parent = <&bsc_irq>;
+			interrupts = <1>;
+			clock-frequency = <97500>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ddc1: i2c@7d508280 {
+			compatible = "brcm,brcmstb-i2c";
+			reg = <0x7d508280 0x58>;
+			interrupt-parent = <&bsc_irq>;
+			interrupts = <2>;
+			clock-frequency = <97500>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		bsc_irq: interrupt-controller@7d508380 {
+			compatible = "brcm,bcm7271-l2-intc";
+			reg = <0x7d508380 0x10>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		main_irq: interrupt-controller@7d508400 {
+			compatible = "brcm,bcm7271-l2-intc";
+			reg = <0x7d508400 0x10>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		hdmi0: hdmi@7c701400 {
+			compatible = "brcm,bcm2712-hdmi0";
+			reg = <0x7c701400 0x300>,
+			      <0x7c701000 0x200>,
+			      <0x7c701d00 0x300>,
+			      <0x7c702000 0x80>,
+			      <0x7c703800 0x200>,
+			      <0x7c704000 0x800>,
+			      <0x7c700100 0x80>,
+			      <0x7d510800 0x100>,
+			      <0x7c720000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			resets = <&dvp 1>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <1>, <2>, <3>,
+				     <7>, <8>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "hpd-connected", "hpd-removed";
+			ddc = <&ddc0>;
+		};
+
+		hdmi1: hdmi@7c706400 {
+			compatible = "brcm,bcm2712-hdmi1";
+			reg = <0x7c706400 0x300>,
+			      <0x7c706000 0x200>,
+			      <0x7c706d00 0x300>,
+			      <0x7c707000 0x80>,
+			      <0x7c708800 0x200>,
+			      <0x7c709000 0x800>,
+			      <0x7c700180 0x80>,
+			      <0x7d511000 0x100>,
+			      <0x7c720000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			resets = <&dvp 2>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <11>, <12>, <13>,
+				     <14>, <15>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "hpd-connected", "hpd-removed";
+			ddc = <&ddc1>;
+		};
+	};
+
+	axi: axi {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x00000000  0x00 0x00000000  0x10 0x00000000>,
+			 <0x10 0x00000000  0x10 0x00000000  0x01 0x00000000>,
+			 <0x14 0x00000000  0x14 0x00000000  0x04 0x00000000>,
+			 <0x18 0x00000000  0x18 0x00000000  0x04 0x00000000>,
+			 <0x1c 0x00000000  0x1c 0x00000000  0x04 0x00000000>;
+
+		dma-ranges = <0x00 0x00000000  0x00 0x00000000  0x10 0x00000000>,
+			     <0x10 0x00000000  0x10 0x00000000  0x01 0x00000000>,
+			     <0x14 0x00000000  0x14 0x00000000  0x04 0x00000000>,
+			     <0x18 0x00000000  0x18 0x00000000  0x04 0x00000000>,
+			     <0x1c 0x00000000  0x1c 0x00000000  0x04 0x00000000>;
+
+		vc4: gpu {
+			compatible = "brcm,bcm2712-vc6";
+		};
+
+		pcie0: pcie@1000100000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x10 0x00100000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			max-link-speed = <2>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&pcie_rescal>, <&bcm_reset 42>;
+			reset-names = "rescal", "bridge";
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges =
+				/* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x17 0x00000000 0x00 0xfffffffc>,
+				/* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+				<0x43000000 0x04 0x00000000 0x14 0x00000000 0x03 0x00000000>;
+
+			dma-ranges =
+				/* 64GiB, 64-bit, prefetchable at PCIe 10_0000_0000 */
+				<0x43000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>;
+
+			status = "disabled";
+		};
+
+		pcie1: pcie@1000110000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x10 0x00110000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			max-link-speed = <2>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&pcie_rescal>, <&bcm_reset 43>;
+			reset-names = "rescal", "bridge";
+			msi-controller;
+			msi-parent = <&mip1>;
+
+			ranges =
+				/* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x1b 0x00000000 0x00 0xfffffffc>,
+				/* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+				<0x43000000 0x04 0x00000000 0x18 0x00000000 0x03 0x00000000>;
+
+			dma-ranges =
+				/* 64GiB, 64-bit, non-prefetchable at PCIe 10_0000_0000 */
+				<0x03000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+				/* 4KiB, 64-bit, non-prefetchable at PCIe ff_ffff_f000 MIP1 */
+				<0x03000000 0xff 0xfffff000 0x10 0x00131000 0x00 0x00001000>;
+
+			status = "disabled";
+		};
+
+		pcie2: pcie@1000120000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x10 0x00120000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			max-link-speed = <2>;
+			num-lanes = <4>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&pcie_rescal>, <&bcm_reset 44>;
+			reset-names = "rescal", "bridge";
+			msi-controller;
+			msi-parent = <&mip0>;
+
+			ranges =
+				/* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x1f 0x00000000 0x00 0xfffffffc>,
+				/* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+				<0x43000000 0x04 0x00000000 0x1c 0x00000000 0x03 0x00000000>;
+
+			dma-ranges =
+				/* 4MiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x1f 0x00000000 0x00 0x00400000>,
+				/* 64GiB, 64-bit, prefetchable at PCIe 10_0000_0000 */
+				<0x43000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+				/* 4KiB, 64-bit, non-prefetchable at PCIe ff_ffff_f000 MIP0 */
+				<0x03000000 0xff 0xfffff000 0x10 0x00130000 0x00 0x00001000>;
+
+			status = "disabled";
+		};
+
+		mip0: msi-controller@1000130000 {
+			compatible = "brcm,bcm2712-mip";
+			reg = <0x10 0x00130000 0x00 0xc0>,
+			      <0xff 0xfffff000 0x00 0x1000>;
+			msi-controller;
+			msi-ranges = <&gicv2 GIC_SPI 128 IRQ_TYPE_EDGE_RISING 64>;
+			brcm,msi-offset = <0>;
+		};
+
+		mip1: msi-controller@1000131000 {
+			compatible = "brcm,bcm2712-mip";
+			reg = <0x10 0x00131000 0x00 0xc0>,
+			      <0xff 0xfffff000 0x00 0x1000>;
+			msi-controller;
+			msi-ranges = <&gicv2 GIC_SPI 247 IRQ_TYPE_EDGE_RISING 8>;
+			brcm,msi-offset = <8>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clk_27MHz: clk-27M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		clock-output-names = "27MHz-clock";
+	};
+
+	clk_108MHz: clk-108M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <108000000>;
+		clock-output-names = "108MHz-clock";
+	};
+
+	hvs: hvs@107c580000 {
+		compatible = "brcm,bcm2712-hvs";
+		reg = <0x10 0x7c580000 0x0 0x1a000>;
+		interrupt-parent = <&disp_intr>;
+		interrupts = <2>, <9>, <16>;
+		interrupt-names = "ch0-eof", "ch1-eof", "ch2-eof";
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-2-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-2-b.dts
new file mode 100644
index 000000000000..57742ed40049
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-2-b.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-2-b.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
index 27741b71ba9e..9a8461d91c8c 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -2,6 +2,7 @@
 dtb-$(CONFIG_ARCH_BCMBCA) += \
 				bcm4906-netgear-r8000p.dtb \
 				bcm4906-tplink-archer-c2300-v1.dtb \
+				bcm4906-zyxel-ex3510b.dtb \
 				bcm4908-asus-gt-ac5300.dtb \
 				bcm4908-netgear-raxe500.dtb \
 				bcm94908.dtb \
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
index 78204d71ecd2..a5f9ec92bd5e 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
@@ -125,6 +125,11 @@
 	};
 };
 
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
 &nandcs {
 	nand-ecc-strength = <4>;
 	nand-ecc-step-size = <512>;
@@ -139,16 +144,20 @@
 		#size-cells = <1>;
 
 		partition@0 {
-			compatible = "nvmem-cells";
 			label = "cferom";
 			reg = <0x0 0x100000>;
-
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x0 0x100000>;
 
-			base_mac_addr: mac@106a0 {
-				reg = <0x106a0 0x6>;
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				base_mac_addr: mac@106a0 {
+					reg = <0x106a0 0x6>;
+				};
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
index fcf092c81b59..19fc03ef47a0 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
@@ -155,6 +155,11 @@
 	};
 };
 
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
 &nandcs {
 	nand-ecc-strength = <4>;
 	nand-ecc-step-size = <512>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-zyxel-ex3510b.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-zyxel-ex3510b.dts
new file mode 100644
index 000000000000..54e453bd09f7
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-zyxel-ex3510b.dts
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "bcm4906.dtsi"
+
+/ {
+	compatible = "zyxel,ex3510b", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
+	model = "Zyxel EX3510-B";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		key-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		key-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&leds {
+	pinctrl-0 = <&pins_led_0_a>, <&pins_led_2_a>, <&pins_led_3_a>,
+		    <&pins_led_4_a>, <&pins_led_10_a>, <&pins_led_12_a>,
+		    <&pins_led_14_a>, <&pins_led_15_a>, <&pins_led_21_a>;
+	pinctrl-names = "default";
+
+	led@0 {
+		reg = <0x0>;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_RED>;
+	};
+
+	led@2 {
+		reg = <0x2>;
+		function = LED_FUNCTION_WAN_ONLINE;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@3 {
+		reg = <0x3>;
+		function = LED_FUNCTION_WAN_ONLINE;
+		color = <LED_COLOR_ID_RED>;
+	};
+
+	led@4 {
+		reg = <0x4>;
+		function = LED_FUNCTION_USB;
+		color = <LED_COLOR_ID_GREEN>;
+		trigger-sources = <&ohci_port1>, <&ohci_port2>,
+				  <&ehci_port1>, <&ehci_port2>,
+				  <&xhci_port1>, <&xhci_port2>;
+		linux,default-trigger = "usbport";
+	};
+
+	led@a {
+		reg = <0xa>;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_GREEN>;
+		linux,default-trigger = "default-on";
+	};
+
+	led@c {
+		reg = <0xc>;
+		function = LED_FUNCTION_LAN;
+		color = <LED_COLOR_ID_GREEN>;
+		active-low;
+	};
+
+	led@e {
+		reg = <0xe>;
+		function = LED_FUNCTION_WPS;
+		color = <LED_COLOR_ID_GREEN>;
+		active-low;
+	};
+
+	led@f {
+		reg = <0xf>;
+		function = LED_FUNCTION_WPS;
+		color = <LED_COLOR_ID_RED>;
+		active-low;
+	};
+
+	led@15 {
+		reg = <0x15>;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_GREEN>;
+		active-low;
+	};
+};
+
+&enet {
+	nvmem-cells = <&base_mac_addr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb_phy {
+	brcm,ioc = <1>;
+	brcm,ipp = <1>;
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan1";
+	};
+
+	port@1 {
+		label = "lan2";
+	};
+
+	port@2 {
+		label = "lan3";
+	};
+
+	port@3 {
+		label = "lan4";
+	};
+
+	port@7 {
+		reg = <7>;
+		phy-mode = "internal";
+		phy-handle = <&phy12>;
+		label = "wan";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+};
+
+&nandcs {
+	brcm,nand-oob-sector-size = <27>;
+	nand-ecc-strength = <8>;
+	nand-ecc-step-size = <512>;
+	nand-on-flash-bbt;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	partitions {
+		compatible = "brcm,bcm4908-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			compatible = "nvmem-cells";
+			label = "cferom";
+			reg = <0x0 0x100000>;
+			read-only;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			base_mac_addr: mac@106a0 {
+				reg = <0x106a0 0x6>;
+			};
+		};
+
+		partition@100000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x100000 0x5f80000>;
+		};
+
+		partition@6080000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x6080000 0x5f80000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
index d94a53d68320..2a0d4ee3bd79 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
@@ -166,11 +166,15 @@
 	};
 };
 
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
 &nandcs {
 	nand-ecc-strength = <4>;
 	nand-ecc-step-size = <512>;
 	nand-on-flash-bbt;
-	brcm,nand-has-wp;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -181,16 +185,17 @@
 		#size-cells = <1>;
 
 		partition@0 {
-			compatible = "nvmem-cells";
 			label = "cferom";
 			reg = <0x0 0x100000>;
 
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x0 0x100000>;
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
 
-			base_mac_addr: mac@106a0 {
-				reg = <0x106a0 0x6>;
+				base_mac_addr: mac@106a0 {
+					reg = <0x106a0 0x6>;
+				};
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
index 2f124b027bbf..3b7595fd4e81 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -30,7 +30,7 @@
 			compatible = "brcm,brahma-b53";
 			reg = <0x0>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0xfff8>;
+			cpu-release-addr = <0x0 0xff8>;
 			next-level-cache = <&l2>;
 		};
 
@@ -39,7 +39,7 @@
 			compatible = "brcm,brahma-b53";
 			reg = <0x1>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0xfff8>;
+			cpu-release-addr = <0x0 0xff8>;
 			next-level-cache = <&l2>;
 		};
 
@@ -48,7 +48,7 @@
 			compatible = "brcm,brahma-b53";
 			reg = <0x2>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0xfff8>;
+			cpu-release-addr = <0x0 0xff8>;
 			next-level-cache = <&l2>;
 		};
 
@@ -57,7 +57,7 @@
 			compatible = "brcm,brahma-b53";
 			reg = <0x3>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0xfff8>;
+			cpu-release-addr = <0x0 0xff8>;
 			next-level-cache = <&l2>;
 		};
 
@@ -68,6 +68,16 @@
 		};
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cfe-stub@0 {
+			reg = <0x0 0x0 0x0 0x1000>;
+		};
+	};
+
 	axi@81000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -227,9 +237,6 @@
 				brcm,num-gphy = <5>;
 				brcm,num-rgmii-ports = <2>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ports: ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -316,11 +323,12 @@
 		};
 	};
 
+	/* PERF Peripherals */
 	bus@ff800000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x00 0x00 0xff800000 0x3000>;
+		ranges = <0x00 0x00 0xff800000 0x400000>;
 
 		twd: timer-mfd@400 {
 			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
@@ -341,13 +349,103 @@
 			};
 		};
 
-		gpio0: gpio-controller@500 {
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
 			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x540 0x04>;
 			reg-names = "dirout", "dat";
-			reg = <0x500 0x28>, <0x528 0x28>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x544 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
 
+		/* GPIOs 256 .. 287 */
+		gpio8: gpio@520 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x520 0x04>, <0x548 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
 			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 288 .. 319 */
+		gpio9: gpio@524 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x524 0x04>, <0x54c 0x04>;
+			reg-names = "dirout", "dat";
 			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
 		};
 
 		pinctrl@560 {
@@ -577,6 +675,12 @@
 			#size-cells = <0>;
 		};
 
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -589,7 +693,7 @@
 			status = "disabled";
 		};
 
-		nand-controller@1800 {
+		nand_controller: nand-controller@1800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
@@ -597,7 +701,8 @@
 			reg-names = "nand", "nand-int-base";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "nand_ctlrdy";
-			status = "okay";
+			brcm,wp-not-connected;
+			status = "disabled";
 
 			nandcs: nand@0 {
 				compatible = "brcm,nandcs";
@@ -628,6 +733,19 @@
 				#reset-cells = <1>;
 			};
 		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
 	};
 
 	reboot {
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
index d658c81f7285..14b2adfb817c 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
@@ -138,6 +138,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
index 4f474d47022e..589b8a1efc72 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
@@ -119,6 +119,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
index 909f254dc47d..a441388c0cd2 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2022 Broadcom Ltd.
+ * This DTSI is for the B0 and later revision of the SoC
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -125,6 +126,101 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -137,6 +233,35 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		/* B0 AHB Peripherals */
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		/* B0 ARM UART Peripheral block */
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
@@ -145,5 +270,23 @@
 			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
+
+		uart1: serial@13000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x13000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@14000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x14000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
index 685ae32951c9..1d1303cf90f3 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
@@ -138,6 +138,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
index 820553ce541b..dcbd0fdd33d2 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
@@ -93,11 +93,103 @@
 		};
 	};
 
+	/* PERF Peripherals */
 	bus@ff800000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0x0 0xff800000 0x800000>;
+		ranges = <0x0 0x0 0xff800000 0x400000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
 
 		uart0: serial@640 {
 			compatible = "brcm,bcm6345-uart";
@@ -108,6 +200,29 @@
 			status = "disabled";
 		};
 
+		uart1: serial@660 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x660 0x18>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -119,5 +234,32 @@
 			num-cs = <8>;
 			status = "disabled";
 		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
index 0eb93c298297..c105a734a648 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
@@ -111,11 +111,12 @@
 		};
 	};
 
+	/* PERF Peripherals */
 	bus@ff800000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0x0 0xff800000 0x62000>;
+		ranges = <0x0 0x0 0xff800000 0x400000>;
 
 		twd: timer-mfd@400 {
 			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
@@ -136,6 +137,86 @@
 			};
 		};
 
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
 		uart0: serial@640 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x640 0x18>;
@@ -145,6 +226,29 @@
 			status = "disabled";
 		};
 
+		uart1: serial@660 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x660 0x18>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -156,5 +260,32 @@
 			num-cs = <8>;
 			status = "disabled";
 		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
index c4e6e71f6310..e5b37643296b 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
@@ -32,3 +32,12 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
index e69cd683211a..4b779e6c22e1 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
index db2c82d6dfd8..2851e8e41bf4 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
index 25c12bc63545..17dc594fe83f 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
index faba21f03120..34832a734734 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
index 9808331eede2..e1396b5544b7 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
index 1f561c8e13b0..30bbf6f2917e 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index dec5a110f1e8..5939d342aec7 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -50,7 +50,7 @@
 		bootargs = "earlycon=uart8250,mmio32,0x66130000";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
 	};
@@ -137,7 +137,6 @@
 		spi-cpha;
 		spi-cpol;
 		pl022,interface = <0>;
-		pl022,slave-tx-disable = <0>;
 		pl022,com-mode = <0>;
 		pl022,rx-level-trig = <1>;
 		pl022,tx-level-trig = <1>;
@@ -200,7 +199,6 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
index 1d314f17bbdd..0e134a94e142 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
@@ -47,7 +47,7 @@
 		bootargs = "earlycon=uart8250,mmio32,0x66130000";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x00000001 0x00000000>;
 	};
@@ -151,7 +151,6 @@
 		#size-cells = <1>;
 		compatible = "m25p80";
 		spi-max-frequency = <62500000>;
-		m25p,default-addr-width = <3>;
 		reg = <0x0 0x0>;
 
 		partition@0 {
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 9dcd25ec2c04..9888a1fabd5c 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -102,7 +102,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
@@ -134,7 +134,6 @@
 		brcm,pcie-ob;
 		brcm,pcie-ob-oarr-size;
 		brcm,pcie-ob-axi-offset = <0x00000000>;
-		brcm,pcie-ob-window-size = <256>;
 
 		status = "disabled";
 
@@ -165,7 +164,6 @@
 		brcm,pcie-ob;
 		brcm,pcie-ob-oarr-size;
 		brcm,pcie-ob-axi-offset = <0x30000000>;
-		brcm,pcie-ob-window-size = <256>;
 
 		status = "disabled";
 
@@ -369,7 +367,6 @@
 
 			v2m0: v2m@0 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x00000 0x1000>;
 				arm,msi-base-spi = <72>;
@@ -378,7 +375,6 @@
 
 			v2m1: v2m@10000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x10000 0x1000>;
 				arm,msi-base-spi = <88>;
@@ -387,7 +383,6 @@
 
 			v2m2: v2m@20000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x20000 0x1000>;
 				arm,msi-base-spi = <104>;
@@ -396,7 +391,6 @@
 
 			v2m3: v2m@30000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x30000 0x1000>;
 				arm,msi-base-spi = <120>;
@@ -405,7 +399,6 @@
 
 			v2m4: v2m@40000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x40000 0x1000>;
 				arm,msi-base-spi = <136>;
@@ -414,7 +407,6 @@
 
 			v2m5: v2m@50000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x50000 0x1000>;
 				arm,msi-base-spi = <152>;
@@ -423,7 +415,6 @@
 
 			v2m6: v2m@60000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x60000 0x1000>;
 				arm,msi-base-spi = <168>;
@@ -432,7 +423,6 @@
 
 			v2m7: v2m@70000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x70000 0x1000>;
 				arm,msi-base-spi = <184>;
@@ -586,6 +576,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
new file mode 100644
index 000000000000..5a815c379794
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/raspberrypi,rp1-clocks.h>
+
+pci_ep_bus: pci-ep-bus@1 {
+	compatible = "simple-bus";
+	ranges = <0x00 0x40000000  0x01 0x00 0x00000000  0x00 0x00400000>;
+	dma-ranges = <0x10 0x00000000  0x43000000 0x10 0x00000000  0x10 0x00000000>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	rp1_clocks: clocks@40018000 {
+		compatible = "raspberrypi,rp1-clocks";
+		reg = <0x00 0x40018000 0x0 0x10038>;
+		#clock-cells = <1>;
+		clocks = <&clk_rp1_xosc>;
+		assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>,
+				  <&rp1_clocks RP1_PLL_SYS>,
+				  <&rp1_clocks RP1_PLL_SYS_SEC>,
+				  <&rp1_clocks RP1_CLK_SYS>;
+		assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE
+				       <200000000>,  // RP1_PLL_SYS
+				       <125000000>,  // RP1_PLL_SYS_SEC
+				       <200000000>;  // RP1_CLK_SYS
+	};
+
+	rp1_gpio: pinctrl@400d0000 {
+		compatible = "raspberrypi,rp1-gpio";
+		reg = <0x00 0x400d0000  0x0 0xc000>,
+		      <0x00 0x400e0000  0x0 0xc000>,
+		      <0x00 0x400f0000  0x0 0xc000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+			     <1 IRQ_TYPE_LEVEL_HIGH>,
+			     <2 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	rp1_eth: ethernet@40100000 {
+		compatible = "raspberrypi,rp1-gem";
+		reg = <0x00 0x40100000  0x0 0x4000>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rp1_clocks RP1_CLK_SYS>,
+			 <&rp1_clocks RP1_CLK_SYS>,
+			 <&rp1_clocks RP1_CLK_ETH>,
+			 <&rp1_clocks RP1_CLK_ETH_TSU>;
+		clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	rp1_usb0: usb@40200000 {
+		compatible = "snps,dwc3";
+		reg = <0x00 0x40200000  0x0 0x100000>;
+		interrupts = <31 IRQ_TYPE_EDGE_RISING>;
+		dr_mode = "host";
+		usb3-lpm-capable;
+		snps,dis_rxdet_inp3_quirk;
+		snps,parkmode-disable-hs-quirk;
+		snps,parkmode-disable-ss-quirk;
+		snps,tx-max-burst = /bits/ 8 <8>;
+		snps,tx-thr-num-pkt = /bits/ 8 <2>;
+		status = "disabled";
+	};
+
+	rp1_usb1: usb@40300000 {
+		compatible = "snps,dwc3";
+		reg = <0x00 0x40300000  0x0 0x100000>;
+		interrupts = <36 IRQ_TYPE_EDGE_RISING>;
+		dr_mode = "host";
+		usb3-lpm-capable;
+		snps,dis_rxdet_inp3_quirk;
+		snps,parkmode-disable-hs-quirk;
+		snps,parkmode-disable-ss-quirk;
+		snps,tx-max-burst = /bits/ 8 <8>;
+		snps,tx-thr-num-pkt = /bits/ 8 <2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi
new file mode 100644
index 000000000000..0ef30d7f1c35
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+rp1_nexus {
+	compatible = "pci1de4,1";
+	#address-cells = <3>;
+	#size-cells = <2>;
+	ranges = <0x01 0x00 0x00000000
+		  0x02000000 0x00 0x00000000
+		  0x0 0x400000>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	#include "rp1-common.dtsi"
+};
diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso
new file mode 100644
index 000000000000..ab4f146d22c0
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rp1.dtso
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+/plugin/;
+
+&pcie2 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	#include "rp1-nexus.dtsi"
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index f049687d6b96..857fa427e195 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -142,7 +142,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a72-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -450,6 +450,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinmux 0 0 16>,
 					<&pinmux 16 71 2>,
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
index 8ad31dee11a3..cc860a80af51 100644
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -361,24 +361,24 @@
 	};
 
 	pmu {
-		compatible = "cavium,thunder-pmu", "arm,armv8-pmuv3";
+		compatible = "cavium,thunder-pmu";
 		interrupts = <1 7 4>;
 	};
 
+	refclk50mhz: refclk50mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "refclk50mhz";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		refclk50mhz: refclk50mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <50000000>;
-			clock-output-names = "refclk50mhz";
-		};
-
-		gic0: interrupt-controller@8010,00000000 {
+		gic0: interrupt-controller@801000000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
 			#address-cells = <2>;
@@ -397,7 +397,7 @@
 			};
 		};
 
-		uaa0: serial@87e0,24000000 {
+		uaa0: serial@87e024000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x87e0 0x24000000 0x0 0x1000>;
 			interrupts = <1 21 4>;
@@ -405,7 +405,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		uaa1: serial@87e0,25000000 {
+		uaa1: serial@87e025000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x87e0 0x25000000 0x0 0x1000>;
 			interrupts = <1 22 4>;
diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dts b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts
index d005e1e79c3d..89fc4107a0c4 100644
--- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dts
+++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts
@@ -14,7 +14,7 @@
 	model = "Cavium ThunderX2 CN99XX";
 	compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x0 0x80000000>,  /* 2G @ 2G  */
 		      <0x00000008 0x80000000 0x0 0x80000000>;  /* 2G @ 34G */
diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
index 3419bd252696..966fb57280f3 100644
--- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
@@ -83,7 +83,7 @@
 	};
 
 	pmu {
-		compatible = "brcm,vulcan-pmu", "arm,armv8-pmuv3";
+		compatible = "brcm,vulcan-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; /* PMU overflow */
 	};
 
@@ -103,7 +103,6 @@
 
 		/* ECAM at 0x3000_0000 - 0x4000_0000 */
 		reg = <0x0 0x30000000  0x0 0x10000000>;
-		reg-names = "PCI ECAM";
 
 		/*
 		 * PCI ranges:
@@ -137,8 +136,8 @@
 			reg = <0x04 0x02020000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk125mhz>;
-			clock-names = "apb_pclk";
+			clocks = <&clk125mhz>, <&clk125mhz>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/cix/Makefile b/arch/arm64/boot/dts/cix/Makefile
new file mode 100644
index 000000000000..ed3713982012
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_CIX) += sky1-orion-o6.dtb
diff --git a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
new file mode 100644
index 000000000000..d74964d53c3b
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "sky1.dtsi"
+/ {
+	model = "Radxa Orion O6";
+	compatible = "radxa,orion-o6", "cix,sky1";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x28000000>;
+			linux,cma-default;
+		};
+	};
+
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
new file mode 100644
index 000000000000..2fb2c99c0796
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/cix,sky1.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a520";
+			enable-method = "psci";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <403>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a520";
+			enable-method = "psci";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <403>;
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a520";
+			enable-method = "psci";
+			reg = <0x0 0x200>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <403>;
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a520";
+			enable-method = "psci";
+			reg = <0x0 0x300>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <403>;
+		};
+
+		cpu4: cpu@400 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x400>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu5: cpu@500 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x500>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu6: cpu@600 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x600>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu7: cpu@700 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x700>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu8: cpu@800 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x800>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu9: cpu@900 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x900>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu10: cpu@a00 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0xa00>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu11: cpu@b00 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0xb00>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+				core4 {
+					cpu = <&cpu4>;
+				};
+				core5 {
+					cpu = <&cpu5>;
+				};
+				core6 {
+					cpu = <&cpu6>;
+				};
+				core7 {
+					cpu = <&cpu7>;
+				};
+				core8 {
+					cpu = <&cpu8>;
+				};
+				core9 {
+					cpu = <&cpu9>;
+				};
+				core10 {
+					cpu = <&cpu10>;
+				};
+				core11 {
+					cpu = <&cpu11>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		ap_to_pm_scmi: scmi {
+			compatible = "arm,scmi";
+			mbox-names = "tx", "rx";
+			mboxes = <&mbox_ap2pm 8>, <&mbox_pm2ap 8>;
+			shmem = <&ap2pm_scmi_mem>, <&pm2ap_scmi_mem>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	pmu-a520 {
+		compatible = "arm,cortex-a520-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition0>;
+	};
+
+	pmu-a720 {
+		compatible = "arm,cortex-a720-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0 0x20 0>;
+		dma-ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		i2c0: i2c@4010000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04010000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C0_APB>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4020000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04020000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C1_APB>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4030000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04030000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C2_APB>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@4040000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04040000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C3_APB>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@4050000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04050000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C4_APB>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@4060000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04060000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C5_APB>;
+			interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@4070000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04070000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C6_APB>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@4080000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04080000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C7_APB>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		uart0: serial@40b0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x040b0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_UART0_FUNC>, <&scmi_clk CLK_TREE_FCH_UART0_APB>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@40c0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x040c0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_UART1_FUNC>, <&scmi_clk CLK_TREE_FCH_UART1_APB>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@40d0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x040d0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_UART2_FUNC>, <&scmi_clk CLK_TREE_FCH_UART2_APB>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: serial@40e0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x040e0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_UART3_FUNC>, <&scmi_clk CLK_TREE_FCH_UART3_APB>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		i3c0: i3c@40f0000 {
+			compatible = "cdns,i3c-master";
+			reg = <0x0 0x040f0000 0x0 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I3C0_APB>,
+				 <&scmi_clk CLK_TREE_FCH_I3C0_FUNC>;
+			clock-names = "pclk", "sysclk";
+			i3c-scl-hz = <400000>;
+			i2c-scl-hz = <100000>;
+			status = "disabled";
+		};
+
+		i3c1: i3c@4100000 {
+			compatible = "cdns,i3c-master";
+			reg = <0x0 0x04100000 0x0 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I3C1_APB>,
+				 <&scmi_clk CLK_TREE_FCH_I3C1_FUNC>;
+			clock-names = "pclk", "sysclk";
+			i3c-scl-hz = <400000>;
+			i2c-scl-hz = <100000>;
+			status = "disabled";
+		};
+
+		mbox_ap2se: mailbox@5060000 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x05060000 0x0 0x10000>;
+			interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "tx";
+		};
+
+		mbox_se2ap: mailbox@5070000 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x05070000 0x0 0x10000>;
+			interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "rx";
+		};
+
+		ap2pm_scmi_mem: shmem@6590000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x06590000 0x0 0x80>;
+			reg-io-width = <4>;
+		};
+
+		mbox_ap2pm: mailbox@6590080 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x06590080 0x0 0xff80>;
+			interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "tx";
+		};
+
+		pm2ap_scmi_mem: shmem@65a0000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x065a0000 0x0 0x80>;
+			reg-io-width = <4>;
+		};
+
+		mbox_pm2ap: mailbox@65a0080 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x065a0080 0x0 0xff80>;
+			interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "rx";
+		};
+
+		mbox_sfh2ap: mailbox@8090000 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x08090000 0x0 0x10000>;
+			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "rx";
+		};
+
+		mbox_ap2sfh: mailbox@80a0000 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x080a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "tx";
+		};
+
+		gic: interrupt-controller@e010000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0e010000 0 0x10000>,	/* GICD */
+			      <0x0 0x0e090000 0 0x300000>;       /* GICR * 12 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>;
+			#interrupt-cells = <4>;
+			interrupt-controller;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@e050000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x0e050000 0x0 0x30000>;
+				msi-controller;
+				#msi-cells = <1>;
+			};
+
+			ppi-partitions {
+				ppi_partition0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_partition1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6 &cpu7 &cpu8 &cpu9 &cpu10 &cpu11>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 6e4ba69268e5..bcca63136557 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -1,8 +1,22 @@
 # SPDX-License-Identifier: GPL-2.0
+subdir-y += axis
+subdir-y += google
+
 dtb-$(CONFIG_ARCH_EXYNOS) += \
+	exynos2200-g0s.dtb		\
 	exynos5433-tm2.dtb		\
 	exynos5433-tm2e.dtb		\
 	exynos7-espresso.dtb		\
+	exynos7870-a2corelte.dtb	\
+	exynos7870-j6lte.dtb		\
+	exynos7870-on7xelte.dtb		\
 	exynos7885-jackpotlte.dtb	\
 	exynos850-e850-96.dtb		\
-	exynosautov9-sadk.dtb
+	exynos8895-dreamlte.dtb		\
+	exynos9810-starlte.dtb		\
+	exynos990-c1s.dtb		\
+	exynos990-r8s.dtb               \
+	exynos990-x1s.dtb		\
+	exynos990-x1slte.dtb		\
+	exynosautov9-sadk.dtb		\
+	exynosautov920-sadk.dtb
diff --git a/arch/arm64/boot/dts/exynos/axis/Makefile b/arch/arm64/boot/dts/exynos/axis/Makefile
new file mode 100644
index 000000000000..ccf00de64016
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_ARTPEC) += \
+	artpec8-grizzly.dtb
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h b/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h
new file mode 100644
index 000000000000..2c151aa98c96
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Axis ARTPEC-8 SoC device tree pinctrl constants
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__
+
+#define ARTPEC_PIN_PULL_NONE		0
+#define ARTPEC_PIN_PULL_DOWN		1
+#define ARTPEC_PIN_PULL_UP		3
+
+#define ARTPEC_PIN_FUNC_INPUT		0
+#define ARTPEC_PIN_FUNC_OUTPUT		1
+#define ARTPEC_PIN_FUNC_2		2
+#define ARTPEC_PIN_FUNC_3		3
+#define ARTPEC_PIN_FUNC_4		4
+#define ARTPEC_PIN_FUNC_5		5
+#define ARTPEC_PIN_FUNC_6		6
+#define ARTPEC_PIN_FUNC_EINT		0xf
+#define ARTPEC_PIN_FUNC_F		ARTPEC_PIN_FUNC_EINT
+
+/* Drive strength for ARTPEC */
+#define ARTPEC_PIN_DRV_SR1		0x8
+#define ARTPEC_PIN_DRV_SR2		0x9
+#define ARTPEC_PIN_DRV_SR3		0xa
+#define ARTPEC_PIN_DRV_SR4		0xb
+#define ARTPEC_PIN_DRV_SR5		0xc
+#define ARTPEC_PIN_DRV_SR6		0xd
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__ */
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts b/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts
new file mode 100644
index 000000000000..5ae864ec3193
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 Grizzly board device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+/dts-v1/;
+#include "artpec8.dtsi"
+#include "artpec8-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	model = "ARTPEC-8 grizzly board";
+	compatible = "axis,artpec8-grizzly", "axis,artpec8";
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+};
+
+&osc_clk {
+	clock-frequency = <50000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi
new file mode 100644
index 000000000000..8d239a70f1b4
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+#include "artpec-pinctrl.h"
+
+&pinctrl_fsys {
+	gpe0: gpe0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe2: gpe2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps0: gps0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps1: gps1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	serial0_bus: serial0-bus-pins {
+		samsung,pins = "gpf4-4", "gpf4-5";
+		samsung,pin-function = <ARTPEC_PIN_FUNC_2>;
+		samsung,pin-pud = <ARTPEC_PIN_PULL_UP>;
+		samsung,pin-drv = <ARTPEC_PIN_DRV_SR3>;
+	};
+};
+
+&pinctrl_peric {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi b/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi
new file mode 100644
index 000000000000..db9833297982
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 SoC device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axis,artpec8-clk.h>
+
+/ {
+	compatible = "axis,artpec8";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		pinctrl0 = &pinctrl_fsys;
+		pinctrl1 = &pinctrl_peric;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+			clocks = <&cmu_cpucl CLK_GOUT_CPUCL_CLUSTER_CPU>;
+			clock-names = "cpu";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep: cpu-sleep {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	fin_pll: clock-finpll {
+		compatible = "fixed-factor-clock";
+		clocks = <&osc_clk>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "fin_pll";
+	};
+
+	osc_clk: clock-osc {
+		/* XXTI */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "osc_clk";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x17000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cmu_imem: clock-controller@10010000 {
+			compatible = "axis,artpec8-cmu-imem";
+			reg = <0x10010000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_IMEM_ACLK>,
+				 <&cmu_cmu CLK_DOUT_CMU_IMEM_JPEG>;
+			clock-names = "fin_pll", "aclk", "jpeg";
+		};
+
+		timer@10040000 {
+			compatible = "axis,artpec8-mct", "samsung,exynos4210-mct";
+			reg = <0x10040000 0x1000>;
+			clocks = <&fin_pll>, <&cmu_imem CLK_GOUT_IMEM_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@10201000 {
+			compatible = "arm,gic-400";
+			reg = <0x10201000 0x1000>,
+			      <0x10202000 0x2000>,
+			      <0x10204000 0x2000>,
+			      <0x10206000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cmu_cpucl: clock-controller@11410000 {
+			compatible = "axis,artpec8-cmu-cpucl";
+			reg = <0x11410000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_CPUCL_SWITCH>;
+			clock-names = "fin_pll", "switch";
+		};
+
+		cmu_cmu: clock-controller@12400000 {
+			compatible = "axis,artpec8-cmu-cmu";
+			reg = <0x12400000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		cmu_core: clock-controller@12410000 {
+			compatible = "axis,artpec8-cmu-core";
+			reg = <0x12410000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_CORE_MAIN>,
+				 <&cmu_cmu CLK_DOUT_CMU_CORE_DLP>;
+			clock-names = "fin_pll", "main", "dlp";
+		};
+
+		cmu_bus: clock-controller@12c10000 {
+			compatible = "axis,artpec8-cmu-bus";
+			reg = <0x12c10000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_BUS>,
+				 <&cmu_cmu CLK_DOUT_CMU_BUS_DLP>;
+			clock-names = "fin_pll", "bus", "dlp";
+		};
+
+		cmu_peri: clock-controller@16410000 {
+			compatible = "axis,artpec8-cmu-peri";
+			reg = <0x16410000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_PERI_IP>,
+				 <&cmu_cmu CLK_DOUT_CMU_PERI_AUDIO>,
+				 <&cmu_cmu CLK_DOUT_CMU_PERI_DISP>;
+			clock-names = "fin_pll", "ip", "audio", "disp";
+		};
+
+		pinctrl_peric: pinctrl@165f0000 {
+			compatible = "axis,artpec8-pinctrl";
+			reg = <0x165f0000 0x1000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_fsys: clock-controller@16c10000 {
+			compatible = "axis,artpec8-cmu-fsys";
+			reg = <0x16c10000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_SCAN0>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_SCAN1>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_BUS>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_IP>;
+			clock-names = "fin_pll", "scan0", "scan1", "bus", "ip";
+		};
+
+		pinctrl_fsys: pinctrl@16c30000 {
+			compatible = "axis,artpec8-pinctrl";
+			reg = <0x16c30000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial_0: serial@16cc0000 {
+			compatible = "axis,artpec8-uart";
+			reg = <0x16cc0000 0x100>;
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_UART0_PCLK>,
+				 <&cmu_fsys CLK_GOUT_FSYS_UART0_SCLK_UART>;
+			clock-names = "uart", "clk_uart_baud0";
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&serial0_bus>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts b/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts
new file mode 100644
index 000000000000..0e348c5cf7df
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S22+ (g0s/SM-S906B) device tree source
+ *
+ * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+/dts-v1/;
+#include "exynos2200.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy S22+ (SM-S906B)";
+	compatible = "samsung,g0s", "samsung,exynos2200";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer {
+			compatible = "simple-framebuffer";
+			memory-region = <&cont_splash_mem>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	/*
+	 * RTC clock (XrtcXTI); external, must be 32.768 kHz.
+	 *
+	 * TODO: Remove this once RTC clock is implemented properly as part of
+	 *       PMIC driver.
+	 */
+	rtcclk: clock-rtcclk {
+		compatible = "fixed-clock";
+		clock-output-names = "rtcclk";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_volup>;
+		pinctrl-names = "default";
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa3 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>,
+		      <0x8 0x80000000 0x1 0x7e000000>;
+	};
+
+	/* TODO: Remove this once PMIC is implemented  */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: framebuffer@f6200000 {
+			reg = <0x0 0xf6200000 0x0 (1080 * 2340 * 4)>;
+			no-map;
+		};
+
+		debug_kinfo_reserved: debug-kinfo-reserved@fcfff000 {
+			reg = <0x0 0xfcfff000 0x0 0x1000>;
+			no-map;
+		};
+
+		log_itmon: log-itmon@fffe0000 {
+			reg = <0x0 0xfffe0000 0x0 0x20000>;
+			no-map;
+		};
+	};
+};
+
+&cmu_hsi0 {
+	clocks = <&xtcxo>,
+		 <&rtcclk>,
+		 <&cmu_top CLK_DOUT_CMU_HSI0_NOC>,
+		 <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>,
+		 <&cmu_top CLK_DOUT_CMU_HSI0_DPOSC>,
+		 <&cmu_top CLK_DOUT_CMU_HSI0_USB32DRD>;
+	clock-names = "oscclk", "rtcclk", "noc", "dpgtc", "dposc", "usb";
+};
+
+/*
+ * cpu2 and cpu3 fail to come up consistently, which leads to a hang later
+ * in the boot process. Disable them until the issue is figured out.
+ */
+&cpu2 {
+	status = "fail";
+};
+
+&cpu3 {
+	status = "fail";
+};
+
+&ext_26m {
+	clock-frequency = <26000000>;
+};
+
+&ext_200m {
+	clock-frequency = <200000000>;
+};
+
+&mct_peris {
+	status = "okay";
+};
+
+&pinctrl_alive {
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+};
+
+&ppi_cluster0 {
+	affinity = <&cpu0 &cpu1>;
+};
+
+&usb {
+	/* TODO: Replace these once PMIC is implemented  */
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+	status = "okay";
+};
+
+&usb32drd {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	maximum-speed = "high-speed";
+};
+
+&usb_hsphy {
+	/* TODO: Replace these once PMIC is implemented  */
+	vdda12-supply = <&reg_dummy>;
+	vdd-supply = <&reg_dummy>;
+	status = "okay";
+};
+
+&xtcxo {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi
new file mode 100644
index 000000000000..5877da7baf5c
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi
@@ -0,0 +1,1765 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 2200 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpq1: gpq1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpq2: gpq2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	bt_hostwake: bt-hostwake-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpq0-3", "gpq0-2", "gpq0-1", "gpq0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	wlan_host_wake: wlan-host-wake-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_cmgp {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm5: gpm5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm6: gpm6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm7: gpm7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm8: gpm8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm9: gpm9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm10: gpm10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm11: gpm11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm12: gpm12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm13: gpm13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm14: gpm14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm15: gpm15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm16: gpm16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm17: gpm17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm20: gpm20-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm21: gpm21-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm22: gpm22-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm23: gpm23-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm24: gpm24-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpm0-0", "gpm0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpm1-0", "gpm1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpm2-0", "gpm2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpm3-0", "gpm3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpm4-0", "gpm4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpm5-0", "gpm5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpm6-0", "gpm6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpm7-0", "gpm7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpm8-0", "gpm8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c33_bus: hsi2c33-bus-pins {
+		samsung,pins = "gpm9-0", "gpm9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c34_bus: hsi2c34-bus-pins {
+		samsung,pins = "gpm10-0", "gpm10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c35_bus: hsi2c35-bus-pins {
+		samsung,pins = "gpm11-0", "gpm11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c36_bus: hsi2c36-bus-pins {
+		samsung,pins = "gpm12-0", "gpm12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c37_bus: hsi2c37-bus-pins {
+		samsung,pins = "gpm13-0", "gpm13-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c38_bus: hsi2c38-bus-pins {
+		samsung,pins = "gpm23-0", "gpm24-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpm1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpm1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpm2-0", "gpm2-1", "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpm3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpm3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpm4-0", "gpm4-1", "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpm5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpm5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpm6-0", "gpm6-1", "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpm7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_cs_func: spi15-cs-func-pins {
+		samsung,pins = "gpm7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi16_bus: spi16-bus-pins {
+		samsung,pins = "gpm8-0", "gpm8-1", "gpm9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi16_cs: spi16-cs-pins {
+		samsung,pins = "gpm9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi16_cs_func: spi16-cs-func-pins {
+		samsung,pins = "gpm9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi17_bus: spi17-bus-pins {
+		samsung,pins = "gpm10-0", "gpm10-1", "gpm11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi17_cs: spi17-cs-pins {
+		samsung,pins = "gpm11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi17_cs_func: spi17-cs-func-pins {
+		samsung,pins = "gpm11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi18_bus: spi18-bus-pins {
+		samsung,pins = "gpm12-0", "gpm12-1", "gpm13-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi18_cs: spi18-cs-pins {
+		samsung,pins = "gpm13-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi18_cs_func: spi18-cs-func-pins {
+		samsung,pins = "gpm13-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart14_bus_single: uart14-bus-single-pins {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm2-0", "gpm2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpm0-0", "gpm0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_single: uart15-bus-single-pins {
+		samsung,pins = "gpm3-0", "gpm3-1", "gpm4-0", "gpm4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpm3-0", "gpm3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_single: uart16-bus-single-pins {
+		samsung,pins = "gpm5-0", "gpm5-1", "gpm6-0", "gpm6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_dual: uart16-bus-dual-pins {
+		samsung,pins = "gpm5-0", "gpm5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_single: uart17-bus-single-pins {
+		samsung,pins = "gpm7-0", "gpm7-1", "gpm8-0", "gpm8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_dual: uart17-bus-dual-pins {
+		samsung,pins = "gpm7-0", "gpm7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart18_bus_single: uart18-bus-single-pins {
+		samsung,pins = "gpm8-0", "gpm8-1", "gpm9-0", "gpm9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart18_bus_dual: uart18-bus-dual-pins {
+		samsung,pins = "gpm8-0", "gpm8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart19_bus_single: uart19-bus-single-pins {
+		samsung,pins = "gpm10-0", "gpm10-1", "gpm11-0", "gpm11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart19_bus_dual: uart19-bus-dual-pins {
+		samsung,pins = "gpm12-0", "gpm12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart20_bus_single: uart20-bus-single-pins {
+		samsung,pins = "gpm13-0", "gpm13-1", "gpm14-0", "gpm14-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart20_bus_dual: uart20-bus-dual-pins {
+		samsung,pins = "gpm13-0", "gpm13-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+};
+
+&pinctrl_hsi1 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie0_clkreq: pcie0-clkreq-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie0_perst: pcie0-perst-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie1_clkreq: pcie1-clkreq-pins {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie1_perst: pcie1-perst-pins {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_hsi1ufs {
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gpf2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_i2s0_bus: aud-i2s0-bus-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s1_bus: aud-i2s1-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s2_bus: aud-i2s2-bus-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s3_bus: aud-i2s3-bus-pins {
+		samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s3_pci: aud-i2s3-pci-pins {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_dsd_bus: aud-dsd-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	decon_0_te: decon-0-te-pins {
+		samsung,pins = "gpg2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c0_bus: i3c0-bus-pins {
+		samsung,pins = "gpc0-0", "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c1_bus: i3c1-bus-pins {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c2_bus: i3c2-bus-pins {
+		samsung,pins = "gpc2-0", "gpc2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart6_bus_single: uart6-bus-single-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-1", "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-1", "gpp9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp10-2", "gpp10-1", "gpp10-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart9_bus_single: uart9-bus-single-pins {
+		samsung,pins = "gpp7-3", "gpp7-2", "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_single: uart10-bus-single-pins {
+		samsung,pins = "gpp8-3", "gpp8-2", "gpp8-1", "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_single: uart11-bus-single-pins {
+		samsung,pins = "gpp9-3", "gpp9-2", "gpp9-1", "gpp9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_single: uart12-bus-single-pins {
+		samsung,pins = "gpp10-3", "gpp10-2", "gpp10-1", "gpp10-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+};
+
+&pinctrl_peric2 {
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc5: gpc5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc6: gpc6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc7: gpc7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc8: gpc8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc9: gpc9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp6-2", "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c3_bus: i3c3-bus-pins {
+		samsung,pins = "gpc3-0", "gpc3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c4_bus: i3c4-bus-pins {
+		samsung,pins = "gpc4-0", "gpc4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c5_bus: i3c5-bus-pins {
+		samsung,pins = "gpc5-0", "gpc5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c6_bus: i3c6-bus-pins {
+		samsung,pins = "gpc6-0", "gpc6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c7_bus: i3c7-bus-pins {
+		samsung,pins = "gpc7-0", "gpc7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c8_bus: i3c8-bus-pins {
+		samsung,pins = "gpc8-0", "gpc8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c9_bus: i3c9-bus-pins {
+		samsung,pins = "gpc9-0", "gpc9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c10_bus: i3c10-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c11_bus: i3c11-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-1", "gpp0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-1", "gpp1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-1", "gpp2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-1", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp6-2", "gpp6-1", "gpp6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-1", "gpp11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart0_bus_single: uart0-bus-single-pins {
+		samsung,pins = "gpg0-2", "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	uart2_bus_single: uart2-bus-single-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_single: uart3-bus-single-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_single: uart4-bus-single-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_single: uart5-bus-single-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_single: uart7-bus-single-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_single: uart8-bus-single-pins {
+		samsung,pins = "gpp6-3", "gpp6-2", "gpp6-1", "gpp6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_single: uart13-bus-single-pins {
+		samsung,pins = "gpp11-3", "gpp11-2", "gpp11-1", "gpp11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_ufs {
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_vts {
+	gpv0: gpv0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	amic_pdm0_bus: amic-pdm0-bus-pins {
+		samsung,pins = "gpv0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	amic_pdm1_bus: amic-pdm1-bus-pins {
+		samsung,pins = "gpv0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	amic_pdm2_bus: amic-pdm2-bus-pins {
+		samsung,pins = "gpv0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk0: dmic-bus-clk0-pins {
+		samsung,pins = "gpv0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk1: dmic-bus-clk1-pins {
+		samsung,pins = "gpv0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk2: dmic-bus-clk2-pins {
+		samsung,pins = "gpv0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm0_bus: dmic-pdm0-bus-pins {
+		samsung,pins = "gpv0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm1_bus: dmic-pdm1-bus-pins {
+		samsung,pins = "gpv0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm2_bus: dmic-pdm2-bus-pins {
+		samsung,pins = "gpv0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos2200.dtsi b/arch/arm64/boot/dts/exynos/exynos2200.dtsi
new file mode 100644
index 000000000000..6487ccb58ae7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos2200.dtsi
@@ -0,0 +1,1923 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 2200 SoC device tree source
+ *
+ * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/clock/samsung,exynos2200-cmu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "samsung,exynos2200";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_cmgp;
+		pinctrl2 = &pinctrl_hsi1;
+		pinctrl3 = &pinctrl_ufs;
+		pinctrl4 = &pinctrl_hsi1ufs;
+		pinctrl5 = &pinctrl_peric0;
+		pinctrl6 = &pinctrl_peric1;
+		pinctrl7 = &pinctrl_peric2;
+		pinctrl8 = &pinctrl_vts;
+	};
+
+	xtcxo: clock-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	ext_26m: clock-2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_200m: clock-3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ext-200m";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0>;
+			capacity-dmips-mhz = <260>;
+			dynamic-power-coefficient = <189>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x100>;
+			capacity-dmips-mhz = <260>;
+			dynamic-power-coefficient = <189>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x200>;
+			capacity-dmips-mhz = <260>;
+			dynamic-power-coefficient = <189>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x300>;
+			capacity-dmips-mhz = <260>;
+			dynamic-power-coefficient = <189>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a710";
+			reg = <0x400>;
+			capacity-dmips-mhz = <380>;
+			dynamic-power-coefficient = <560>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a710";
+			reg = <0x500>;
+			capacity-dmips-mhz = <380>;
+			dynamic-power-coefficient = <560>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a710";
+			reg = <0x600>;
+			capacity-dmips-mhz = <380>;
+			dynamic-power-coefficient = <560>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x2";
+			reg = <0x700>;
+			capacity-dmips-mhz = <488>;
+			dynamic-power-coefficient = <765>;
+			enable-method = "psci";
+			cpu-idle-states = <&prime_cpu_sleep>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			little_cpu_sleep: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "c2";
+				entry-latency-us = <70>;
+				exit-latency-us = <170>;
+				min-residency-us = <2000>;
+				arm,psci-suspend-param = <0x10000>;
+			};
+
+			big_cpu_sleep: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "c2";
+				entry-latency-us = <235>;
+				exit-latency-us = <220>;
+				min-residency-us = <3500>;
+				arm,psci-suspend-param = <0x10000>;
+			};
+
+			prime_cpu_sleep: cpu-sleep-2 {
+				compatible = "arm,idle-state";
+				idle-state-name = "c2";
+				entry-latency-us = <150>;
+				exit-latency-us = <190>;
+				min-residency-us = <2500>;
+				arm,psci-suspend-param = <0x10000>;
+			};
+		};
+	};
+
+	pmu-a510 {
+		compatible = "arm,cortex-a510-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a710 {
+		compatible = "arm,cortex-a710-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	pmu-x2 {
+		compatible = "arm,cortex-x2-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos2200-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		cmu_peris: clock-controller@10020000 {
+			compatible = "samsung,exynos2200-cmu-peris";
+			reg = <0x10020000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>,
+				 <&cmu_top CLK_DOUT_CMU_PERIS_NOC>,
+				 <&cmu_top CLK_DOUT_CMU_PERIS_GIC>;
+			clock-names = "tcxo_div3",
+				      "noc",
+				      "gic";
+		};
+
+		mct_peris: timer@10040000 {
+			compatible = "samsung,exynos2200-mct-peris",
+				     "samsung,exynos4210-mct";
+			reg = <0x10040000 0x800>;
+			clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>, <&cmu_peris CLK_MOUT_PERIS_GIC>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 943 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 944 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 945 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 947 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 948 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 949 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x10200000 0x10000>,     /* GICD */
+			      <0x10240000 0x200000>;    /* GICR * 8 */
+
+			#address-cells = <0>;
+			#interrupt-cells = <4>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu7>;
+				};
+			};
+		};
+
+		cmu_peric0: clock-controller@10400000 {
+			compatible = "samsung,exynos2200-cmu-peric0";
+			reg = <0x10400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_NOC>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP0>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP1>;
+			clock-names = "oscclk", "noc", "ip0", "ip1";
+		};
+
+		syscon_peric0: syscon@10420000 {
+			compatible = "samsung,exynos2200-peric0-sysreg", "syscon";
+			reg = <0x10420000 0x10000>;
+		};
+
+		pinctrl_peric0: pinctrl@10430000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x10430000 0x1000>;
+		};
+
+		usi4: usi@105000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x105000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI04>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric0 0x1024>;
+			status = "disabled";
+
+			hsi2c_8: i2c@10500000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10500000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_DOUT_PERIC0_USI04>,
+					 <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c8_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_6: serial@10500000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10500000 0xc0>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI04>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart6_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi4_i2c: usi@105100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x105100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric0 0x1024>;
+			status = "disabled";
+
+			hsi2c_9: i2c@10510000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10510000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_DOUT_PERIC0_I2C>,
+					 <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c9_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		cmu_peric1: clock-controller@10700000 {
+			compatible = "samsung,exynos2200-cmu-peric1";
+			reg = <0x10700000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_NOC>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP0>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP1>;
+			clock-names = "oscclk", "noc", "ip0", "ip1";
+		};
+
+		syscon_peric1: syscon@10720000 {
+			compatible = "samsung,exynos2200-peric1-sysreg", "syscon";
+			reg = <0x10720000 0x10000>;
+		};
+
+		pinctrl_peric1: pinctrl@10730000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x10730000 0x1000>;
+		};
+
+		usi7: usi@109000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI07>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2030>;
+			status = "disabled";
+
+			hsi2c_14: i2c@10900000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10900000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI07>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c14_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_9: serial@10900000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10900000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI07>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart9_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi7_i2c: usi@109100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI07_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x2034>;
+			status = "disabled";
+
+			hsi2c_15: i2c@10910000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10910000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI07_SPI_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c15_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi8: usi@109200c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI08>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2038>;
+			status = "disabled";
+
+			hsi2c_16: i2c@10920000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10920000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI08>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c16_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_10: serial@10920000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10920000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI08>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart10_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi8_i2c: usi@109300c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI08_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x203c>;
+			status = "disabled";
+
+			hsi2c_17: i2c@10930000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10930000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI08_SPI_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c17_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi9: usi@109400c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI09>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2040>;
+			status = "disabled";
+
+			hsi2c_18: i2c@10940000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10940000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI09>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c18_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_11: serial@10940000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10940000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI09>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart11_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi9_i2c: usi@109500c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x2044>;
+			status = "disabled";
+
+			hsi2c_19: i2c@10950000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10950000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c19_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi10: usi@109600c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI10>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2048>;
+			status = "disabled";
+
+			hsi2c_20: i2c@10960000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10960000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI10>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c20_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_12: serial@10960000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10960000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI10>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart12_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi10_i2c: usi@109700c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x204c>;
+			status = "disabled";
+
+			hsi2c_21: i2c@10970000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10970000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c21_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+		};
+
+		cmu_hsi0: clock-controller@10a00000 {
+			compatible = "samsung,exynos2200-cmu-hsi0";
+			reg = <0x10a00000 0x8000>;
+			#clock-cells = <1>;
+		};
+
+		usb32drd: phy@10aa0000 {
+			compatible = "samsung,exynos2200-usb32drd-phy";
+			reg = <0x10aa0000 0x10000>;
+
+			clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>;
+			clock-names = "phy";
+
+			#phy-cells = <1>;
+			phys = <&usb_hsphy>;
+			phy-names = "hs";
+
+			samsung,pmu-syscon = <&pmu_system_controller>;
+
+			status = "disabled";
+		};
+
+		usb_hsphy: phy@10ab0000 {
+			compatible = "samsung,exynos2200-eusb2-phy";
+			reg = <0x10ab0000 0x10000>;
+
+			clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>,
+				 <&cmu_hsi0 CLK_MOUT_HSI0_NOC>,
+				 <&cmu_hsi0 CLK_DOUT_DIV_CLK_HSI0_EUSB>;
+			clock-names = "ref", "bus", "ctrl";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb: usb@10b00000 {
+			compatible = "samsung,exynos2200-dwusb3";
+			ranges = <0x0 0x10b00000 0x10000>;
+
+			clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>;
+			clock-names = "link_aclk";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			usb_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+
+				clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>;
+				clock-names = "ref";
+
+				interrupts = <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				phys = <&usb32drd 0>;
+				phy-names = "usb2-phy";
+
+				snps,dis-u2-freeclk-exists-quirk;
+				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,has-lpm-erratum;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,usb3_lpm_capable;
+			};
+		};
+
+		cmu_ufs: clock-controller@11000000 {
+			compatible = "samsung,exynos2200-cmu-ufs";
+			reg = <0x11000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_UFS_NOC>,
+				 <&cmu_top CLK_MOUT_CMU_UFS_MMC_CARD>,
+				 <&cmu_top CLK_DOUT_CMU_UFS_UFS_EMBD>;
+			clock-names = "oscclk", "noc", "mmc", "ufs";
+		};
+
+		syscon_ufs: syscon@11020000 {
+			compatible = "samsung,exynos2200-ufs-sysreg", "syscon";
+			reg = <0x11020000 0x10000>;
+		};
+
+		pinctrl_ufs: pinctrl@11040000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x11040000 0x1000>;
+		};
+
+		pinctrl_hsi1ufs: pinctrl@11060000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x11060000 0x1000>;
+		};
+
+		pinctrl_hsi1: pinctrl@11240000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x11240000 0x1000>;
+		};
+
+		cmu_peric2: clock-controller@11c00000 {
+			compatible = "samsung,exynos2200-cmu-peric2";
+			reg = <0x11c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC2_NOC>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC2_IP0>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC2_IP1>;
+			clock-names = "oscclk", "noc", "ip0", "ip1";
+		};
+
+		syscon_peric2: syscon@11c20000 {
+			compatible = "samsung,exynos2200-peric2-sysreg", "syscon";
+			reg = <0x11c20000 0x10000>;
+		};
+
+		pinctrl_peric2: pinctrl@11c30000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x11c30000 0x1000>;
+		};
+
+		usi0: usi@11d000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI00>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2000>;
+			status = "disabled";
+
+			hsi2c_0: i2c@11d00000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d00000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI00>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c0_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_2: serial@11d00000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d00000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI00>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart2_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi0_i2c: usi@11d100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI00_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x2004>;
+			status = "disabled";
+
+			hsi2c_1: i2c@11d10000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d10000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI00_SPI_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 703 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c1_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi1: usi@11d200c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI01>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2008>;
+			status = "disabled";
+
+			hsi2c_2: i2c@11d20000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI01>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c2_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_3: serial@11d20000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d20000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI01>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart3_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi1_i2c: usi@11d300c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI01_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x200c>;
+			status = "disabled";
+
+			hsi2c_3: i2c@11d30000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d30000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI01_SPI_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 705 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c3_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi2: usi@11d400c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI02>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2010>;
+			status = "disabled";
+
+			hsi2c_4: i2c@11d40000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d40000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI02>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c4_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_4: serial@11d40000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d40000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI02>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart4_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi2_i2c: usi@11d500c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x2014>;
+			status = "disabled";
+
+			hsi2c_5: i2c@11d50000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d50000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi3: usi@11d600c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI03>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2018>;
+			status = "disabled";
+
+			hsi2c_6: i2c@11d60000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d60000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI03>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c6_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_5: serial@11d60000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d60000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI03>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart5_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi3_i2c: usi@11d700c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x201c>;
+			status = "disabled";
+
+			hsi2c_7: i2c@11d70000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d70000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c7_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5_i2c: usi@11d800c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d800c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x102c>;
+			status = "disabled";
+
+			hsi2c_11: i2c@11d80000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d80000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c11_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi6_i2c: usi@11d900c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d900c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x1004>;
+			status = "disabled";
+
+			hsi2c_13: i2c@11d90000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d90000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c13_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi11: usi@11da00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11da00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI11>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x1058>;
+			status = "disabled";
+
+			hsi2c_22: i2c@11da0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11da0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI11>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c22_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_13: serial@11da0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11da0000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI11>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart13_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi11_i2c: usi@11db00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11db00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x105c>;
+			status = "disabled";
+
+			hsi2c_23: i2c@11db0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11db0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c23_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5: usi@11dd00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11dd00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI05>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x117c>;
+			status = "disabled";
+
+			hsi2c_10: i2c@11dd0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11dd0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI05>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c10_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_7: serial@11dd0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11dd0000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI05>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart7_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi6: usi@11de00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11de00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI06>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x1180>;
+			status = "disabled";
+
+			hsi2c_12: i2c@11de0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11de0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI06>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c12_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_8: serial@11de0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11de0000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI06>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart8_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		cmu_cmgp: clock-controller@14e00000 {
+			compatible = "samsung,exynos2200-cmu-cmgp";
+			reg = <0x14e00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_alive CLK_DOUT_ALIVE_CMGP_NOC>,
+				 <&cmu_alive CLK_DOUT_ALIVE_CMGP_PERI>;
+			clock-names = "oscclk", "noc", "peri";
+		};
+
+		syscon_cmgp: syscon@14e20000 {
+			compatible = "samsung,exynos2200-cmgp-sysreg", "syscon";
+			reg = <0x14e20000 0x10000>;
+		};
+
+		pinctrl_cmgp: pinctrl@14e30000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x14e30000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos2200-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		usi_cmgp0: usi@14f000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI0>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2000>;
+			status = "disabled";
+
+			hsi2c_24: i2c@14f00000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f00000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI0>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c24_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_14: serial@14f00000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f00000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI0>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart14_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp0: usi@14f100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C0>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2070>;
+			status = "disabled";
+
+			hsi2c_25: i2c@14f10000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f10000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C0>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c25_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp1: usi@14f200c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI1>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2010>;
+			status = "disabled";
+
+			hsi2c_26: i2c@14f20000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI1>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c26_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_15: serial@14f20000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f20000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI1>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart15_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp1: usi@14f300c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C1>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2074>;
+			status = "disabled";
+
+			hsi2c_27: i2c@14f30000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f30000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C1>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c27_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp2: usi@14f400c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2020>;
+			status = "disabled";
+
+			hsi2c_28: i2c@14f40000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f40000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI2>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c28_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_16: serial@14f40000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f40000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI2>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart16_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp2: usi@14f500c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2024>;
+			status = "disabled";
+
+			hsi2c_29: i2c@14f50000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f50000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c29_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp3: usi@14f600c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI3>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2030>;
+			status = "disabled";
+
+			hsi2c_30: i2c@14f60000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f60000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI3>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c30_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_17: serial@14f60000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f60000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI3>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart17_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp3: usi@14f700c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2034>;
+			status = "disabled";
+
+			hsi2c_31: i2c@14f70000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f70000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c31_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp4: usi@14f800c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f800c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI4>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2040>;
+			status = "disabled";
+
+			hsi2c_32: i2c@14f80000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f80000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI4>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c32_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_18: serial@14f80000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f80000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI4>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart18_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp4: usi@14f900c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f900c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2044>;
+			status = "disabled";
+
+			hsi2c_33: i2c@14f90000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f90000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c33_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp5: usi@14fa00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fa00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI5>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2050>;
+			status = "disabled";
+
+			hsi2c_34: i2c@14fa0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fa0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI5>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c34_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_19: serial@14fa0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14fa0000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI5>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart19_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp5: usi@14fb00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fb00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2054>;
+			status = "disabled";
+
+			hsi2c_35: i2c@14fb0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fb0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c35_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp6: usi@14fc00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fc00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI6>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2060>;
+			status = "disabled";
+
+			hsi2c_36: i2c@14fc0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fc0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI6>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c36_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_20: serial@14fc0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14fc0000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI6>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart20_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp6: usi@14fd00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fd00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2064>;
+			status = "disabled";
+
+			hsi2c_37: i2c@14fd0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fd0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c37_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp7: usi@14fe00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fe00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2080>;
+			status = "disabled";
+
+			hsi2c_38: i2c@14fe0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fe0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c38_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		cmu_vts: clock-controller@15300000 {
+			compatible = "samsung,exynos2200-cmu-vts";
+			reg = <0x15300000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_VTS_DMIC>;
+			clock-names = "oscclk", "dmic";
+		};
+
+		pinctrl_vts: pinctrl@15320000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x15320000 0x1000>;
+		};
+
+		cmu_alive: clock-controller@15800000 {
+			compatible = "samsung,exynos2200-cmu-alive";
+			reg = <0x15800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_ALIVE_NOC>;
+			clock-names = "oscclk", "noc";
+		};
+
+		pinctrl_alive: pinctrl@15850000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x15850000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos2200-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@15860000 {
+			compatible = "samsung,exynos2200-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x15860000 0x10000>;
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x3c00>; /* SYSTEM_CONFIGURATION */
+				mask = <0x2>; /* SWRESET_SYSTEM */
+				value = <0x2>; /* reset value */
+			};
+		};
+
+		cmu_top: clock-controller@1a320000 {
+			compatible = "samsung,exynos2200-cmu-top";
+			reg = <0x1a320000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>;
+			clock-names = "oscclk";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <25600000>;
+	};
+};
+
+#include "exynos2200-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 8f02de8480b6..a1fb354dea9f 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -85,7 +85,7 @@
 		};
 	};
 
-	i2c_max98504: i2c-gpio-0 {
+	i2c_max98504: i2c-13 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>;
 		scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 91ae0462a706..fa2029e280a5 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -361,7 +361,8 @@
 		ranges = <0x0 0x0 0x0 0x18000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
+			compatible = "samsung,exynos5433-chipid",
+				     "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
@@ -850,7 +851,8 @@
 			reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos7-wakeup-eint";
+				compatible = "samsung,exynos5433-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -935,6 +937,7 @@
 
 		gic: interrupt-controller@11001000 {
 			compatible = "arm,gic-400";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x11001000 0x1000>,
@@ -1466,6 +1469,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi0_bus>;
 			num-cs = <1>;
+			fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -1485,6 +1489,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi1_bus>;
 			num-cs = <1>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -1504,6 +1509,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi2_bus>;
 			num-cs = <1>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -1523,6 +1529,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi3_bus>;
 			num-cs = <1>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -1542,11 +1549,12 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi4_bus>;
 			num-cs = <1>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
 		adc: adc@14d10000 {
-			compatible = "samsung,exynos7-adc";
+			compatible = "samsung,exynos5433-adc", "samsung,exynos7-adc";
 			reg = <0x14d10000 0x100>;
 			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc";
@@ -1556,7 +1564,7 @@
 		};
 
 		i2s1: i2s@14d60000 {
-			compatible = "samsung,exynos7-i2s";
+			compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s";
 			reg = <0x14d60000 0x100>;
 			dmas = <&pdma0 31>, <&pdma0 30>;
 			dma-names = "tx", "rx";
@@ -1571,7 +1579,7 @@
 		};
 
 		pwm: pwm@14dd0000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "samsung,exynos5433-pwm", "samsung,exynos4210-pwm";
 			reg = <0x14dd0000 0x100>;
 			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
@@ -1586,7 +1594,8 @@
 		};
 
 		hsi2c_0: i2c@14e40000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e40000 0x1000>;
 			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1599,7 +1608,8 @@
 		};
 
 		hsi2c_1: i2c@14e50000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e50000 0x1000>;
 			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1612,7 +1622,8 @@
 		};
 
 		hsi2c_2: i2c@14e60000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e60000 0x1000>;
 			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1625,7 +1636,8 @@
 		};
 
 		hsi2c_3: i2c@14e70000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e70000 0x1000>;
 			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1638,7 +1650,8 @@
 		};
 
 		hsi2c_4: i2c@14ec0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ec0000 0x1000>;
 			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1651,7 +1664,8 @@
 		};
 
 		hsi2c_5: i2c@14ed0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ed0000 0x1000>;
 			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1664,7 +1678,8 @@
 		};
 
 		hsi2c_6: i2c@14ee0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ee0000 0x1000>;
 			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1677,7 +1692,8 @@
 		};
 
 		hsi2c_7: i2c@14ef0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ef0000 0x1000>;
 			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1690,7 +1706,8 @@
 		};
 
 		hsi2c_8: i2c@14d90000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14d90000 0x1000>;
 			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1703,7 +1720,8 @@
 		};
 
 		hsi2c_9: i2c@14da0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14da0000 0x1000>;
 			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1716,7 +1734,8 @@
 		};
 
 		hsi2c_10: i2c@14de0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14de0000 0x1000>;
 			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1729,7 +1748,8 @@
 		};
 
 		hsi2c_11: i2c@14df0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14df0000 0x1000>;
 			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1820,7 +1840,8 @@
 		};
 
 		mshc_0: mmc@15540000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1833,7 +1854,8 @@
 		};
 
 		mshc_1: mmc@15550000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1846,7 +1868,8 @@
 		};
 
 		mshc_2: mmc@15560000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1897,7 +1920,8 @@
 			};
 
 			i2s0: i2s@11440000 {
-				compatible = "samsung,exynos7-i2s";
+				compatible = "samsung,exynos5433-i2s",
+					     "samsung,exynos7-i2s";
 				reg = <0x11440000 0x100>;
 				dmas = <&adma 0>, <&adma 2>;
 				dma-names = "tx", "rx";
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 6ed80ddf3369..9cb6bd61262e 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -128,7 +128,8 @@
 		ranges = <0 0 0 0x18000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
+			compatible = "samsung,exynos7-chipid",
+				     "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
@@ -279,7 +280,7 @@
 		};
 
 		serial_0: serial@13630000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x13630000 0x100>;
 			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric0 PCLK_UART0>,
@@ -289,7 +290,7 @@
 		};
 
 		serial_1: serial@14c20000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c20000 0x100>;
 			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART1>,
@@ -299,7 +300,7 @@
 		};
 
 		serial_2: serial@14c30000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c30000 0x100>;
 			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART2>,
@@ -309,7 +310,7 @@
 		};
 
 		serial_3: serial@14c40000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c40000 0x100>;
 			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART3>,
@@ -539,7 +540,7 @@
 		};
 
 		rtc: rtc@10590000 {
-			compatible = "samsung,s3c6410-rtc";
+			compatible = "samsung,exynos7-rtc", "samsung,s3c6410-rtc";
 			reg = <0x10590000 0x100>;
 			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +560,8 @@
 		};
 
 		gpu: gpu@14ac0000 {
-			compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+			compatible = "samsung,exynos7-mali",
+				     "samsung,exynos5433-mali", "arm,mali-t760";
 			reg = <0x14ac0000 0x5000>;
 			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
@@ -619,7 +621,7 @@
 		};
 
 		pwm: pwm@136c0000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "samsung,exynos7-pwm", "samsung,exynos4210-pwm";
 			reg = <0x136c0000 0x100>;
 			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts
new file mode 100644
index 000000000000..eb7b48593187
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts
@@ -0,0 +1,630 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy A2 Core (a2corelte) device tree source
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+/dts-v1/;
+#include "exynos7870.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy A2 Core";
+	compatible = "samsung,a2corelte", "samsung,exynos7870";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = &serial2;
+
+		framebuffer@67000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x67000000 (540 * 960 * 4)>;
+			width = <540>;
+			height = <960>;
+			stride = <(540 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "GPIO Keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+
+		key-power {
+			label = "Power Key";
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-voldown {
+			label = "Volume Down Key";
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volup {
+			label = "Volume Up Key";
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x3f200000>;
+	};
+
+	pwrseq_mmc1: pwrseq-mmc1 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	/* mmc2: vmmc */
+	vdd_fixed_mmc2: regulator-fixed-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_mmc2";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpio = <&gpc0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_fixed_proxled: regulator-fixed-proxled {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_proxled";
+		regulator-boot-on;
+		regulator-always-on;
+		gpio = <&gpd4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@46800000 {
+			compatible = "ramoops";
+			reg = <0x0 0x46800000 0x8000>;
+			console-size = <0x4000>;
+			pmsg-size = <0x4000>;
+		};
+
+		framebuffer@67000000 {
+			reg = <0x0 0x67000000 (540 * 960 * 4)>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&vdd_ldo32>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsi2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mpu05-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+
+		regulators {
+			vdd_buck1: buck1 {
+				regulator-name = "vdd_buck1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck2: buck2 {
+				regulator-name = "vdd_buck2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck3: buck3 {
+				regulator-name = "vdd_buck3";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck4: buck4 {
+				regulator-name = "vdd_buck4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck5: buck5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc2: vqmmc */
+			vdd_ldo2: ldo2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* usbdrd: vdd33 */
+			vdd_ldo8: ldo8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo25: ldo25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vmmc */
+			vdd_ldo26: ldo26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			/* mmc0: vqmmc */
+			vdd_ldo27: ldo27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo29: ldo29 {
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo30: ldo30 {
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo31: ldo31 {
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vibrator: haptic */
+			vdd_ldo32: ldo32 {
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo33: ldo33 {
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo34: ldo34 {
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* touchscreen: vdd */
+			vdd_ldo35: ldo35 {
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2ds12";
+		reg = <0x1d>;
+		interrupt-parent = <&gpa2>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq>;
+
+		st,drdy-int-pin = <1>;
+	};
+
+	proximity@48 {
+		compatible = "sensortek,stk3013", "sensortek,stk3310";
+		reg = <0x48>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&proxm_irq>;
+
+		proximity-near-level = <25>;
+	};
+};
+
+&i2c6 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_irq>;
+
+		vdd-supply = <&vdd_ldo35>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <200>;
+			syna,clip-x-high = <539>;
+			syna,clip-y-high = <959>;
+			touchscreen-x-mm = <62>;
+			touchscreen-y-mm = <110>;
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	vmmc-supply = <&vdd_ldo26>;
+	vqmmc-supply = <&vdd_ldo27>;
+
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	non-removable;
+
+	status = "okay";
+};
+
+&mmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+
+	mmc-pwrseq = <&pwrseq_mmc1>;
+
+	bus-width = <4>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <0x1>;
+		interrupt-names = "host-wake";
+		interrupt-parent = <&gpa2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+
+	vmmc-supply = <&vdd_fixed_mmc2>;
+	vqmmc-supply = <&vdd_ldo2>;
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	broken-cd;
+	disable-wp;
+
+	status = "okay";
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	accel_irq: accel-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	dwmmc2_irq: dwmmc2-irq-pins {
+		samsung,pins = "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fuel_irq: fuel-irq-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	proxm_irq: proxm-irq-pins {
+		samsung,pins = "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	wlan_hostwake: wlan-hostwake-pins {
+		samsung,pins = "gpa2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_top {
+	bt_enable: bt-enable-pins {
+		samsung,pins = "gpd4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlan_enable: wlan-enable-pins {
+		samsung,pins = "gpd3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+		samsung,pin-val = <0>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+
+		device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3000000>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd33-supply = <&vdd_ldo8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
new file mode 100644
index 000000000000..b8ce433b93b1
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
@@ -0,0 +1,613 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy J6 (j6lte) device tree source
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+/dts-v1/;
+#include "exynos7870.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy J6";
+	compatible = "samsung,j6lte", "samsung,exynos7870";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = &serial2;
+
+		framebuffer@67000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x67000000 (720 * 1480 * 4)>;
+			width = <720>;
+			height = <1480>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-hall-effect-sensor {
+		compatible = "gpio-keys";
+		label = "GPIO Hall Effect Sensor";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_irq>;
+
+		event-hall-effect-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&gpa1 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "GPIO Keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+
+		key-power {
+			label = "Power Key";
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-voldown {
+			label = "Volume Down Key";
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volup {
+			label = "Volume Up Key";
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x3d800000>,
+		      <0x0 0x80000000 0x40000000>;
+	};
+
+	pwrseq_mmc1: pwrseq-mmc1 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	/* mmc2: vmmc */
+	vdd_fixed_mmc2: regulator-fixed-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_mmc2";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpio = <&gpc0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@46e00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x46e00000 0x8000>;
+			console-size = <0x4000>;
+			pmsg-size = <0x4000>;
+		};
+
+		framebuffer@67000000 {
+			reg = <0x0 0x67000000 (720 * 1480 * 4)>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&vdd_ldo32>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsi2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mpu05-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+
+		regulators {
+			vdd_buck1: buck1 {
+				regulator-name = "vdd_buck1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck2: buck2 {
+				regulator-name = "vdd_buck2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck3: buck3 {
+				regulator-name = "vdd_buck3";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck4: buck4 {
+				regulator-name = "vdd_buck4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck5: buck5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc2: vqmmc */
+			vdd_ldo2: ldo2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* usbdrd: vdd33 */
+			vdd_ldo8: ldo8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo25: ldo25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vmmc */
+			vdd_ldo26: ldo26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			/* mmc0: vqmmc */
+			vdd_ldo27: ldo27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo29: ldo29 {
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo30: ldo30 {
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo31: ldo31 {
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vibrator: haptic */
+			vdd_ldo32: ldo32 {
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo33: ldo33 {
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* touchscreen: vdd */
+			vdd_ldo34: ldo34 {
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_ldo35: ldo35 {
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2ds12";
+		reg = <0x1d>;
+		interrupt-parent = <&gpa2>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq>;
+
+		mount-matrix = "-1", "0",  "0",
+				"0", "1",  "0",
+				"0", "0", "-1";
+
+		st,drdy-int-pin = <1>;
+	};
+};
+
+&i2c6 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "zinitix,bt532";
+		reg = <0x20>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_irq>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1480>;
+
+		vdd-supply = <&vdd_ldo34>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	vmmc-supply = <&vdd_ldo26>;
+	vqmmc-supply = <&vdd_ldo27>;
+
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	non-removable;
+
+	status = "okay";
+};
+
+&mmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+
+	mmc-pwrseq = <&pwrseq_mmc1>;
+
+	bus-width = <4>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <0x1>;
+		interrupt-names = "host-wake";
+		interrupt-parent = <&gpa2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+
+	vmmc-supply = <&vdd_fixed_mmc2>;
+	vqmmc-supply = <&vdd_ldo2>;
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	broken-cd;
+	disable-wp;
+
+	status = "okay";
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	accel_irq: accel-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	dwmmc2_irq: dwmmc2-irq-pins {
+		samsung,pins = "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fuel_irq: fuel-irq-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hall_irq: hall-irq-pins {
+		samsung,pins = "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	wlan_hostwake: wlan-hostwake-pins {
+		samsung,pins = "gpa2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_top {
+	bt_enable: bt-enable-pins {
+		samsung,pins = "gpd4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlan_enable: wlan-enable-pins {
+		samsung,pins = "gpd3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+		samsung,pin-val = <0>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+
+		device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3000000>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd33-supply = <&vdd_ldo8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts
new file mode 100644
index 000000000000..b1d9eff5a827
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy J7 Prime (on7xelte) device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+/dts-v1/;
+#include "exynos7870.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy J7 Prime";
+	compatible = "samsung,on7xelte", "samsung,exynos7870";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = &serial2;
+
+		framebuffer@67000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x67000000 (1080 * 1920 * 4)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "GPIO Keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_home &key_power &key_voldown &key_volup>;
+
+		key-home {
+			label = "Home Key";
+			gpios = <&gpa1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+
+		key-power {
+			label = "Power Key";
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-voldown {
+			label = "Volume Down Key";
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volup {
+			label = "Volume Up Key";
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x3e400000>,
+		      <0x0 0x80000000 0x80000000>;
+	};
+
+	pwrseq_mmc1: pwrseq-mmc1 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	/* mmc2: vmmc */
+	vdd_fixed_mmc2: regulator-fixed-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_mmc2";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpio = <&gpc0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@46e00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x46e00000 0x8000>;
+			console-size = <0x4000>;
+			pmsg-size = <0x4000>;
+		};
+
+		framebuffer@67000000 {
+			reg = <0x0 0x67000000 (1080 * 1920 * 4)>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&vdd_ldo32>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsi2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mpu05-pmic";
+		reg = <0x66>;
+
+		interrupt-parent = <&gpa0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+
+		regulators {
+			vdd_buck1: buck1 {
+				regulator-name = "vdd_buck1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck2: buck2 {
+				regulator-name = "vdd_buck2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck3: buck3 {
+				regulator-name = "vdd_buck3";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck4: buck4 {
+				regulator-name = "vdd_buck4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck5: buck5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc2: vqmmc */
+			vdd_ldo2: ldo2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* usbdrd: vdd33 */
+			vdd_ldo8: ldo8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo25: ldo25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vmmc */
+			vdd_ldo26: ldo26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vqmmc */
+			vdd_ldo27: ldo27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo29: ldo29 {
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo30: ldo30 {
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo31: ldo31 {
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vibrator: haptic */
+			vdd_ldo32: ldo32 {
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo33: ldo33 {
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo34: ldo34 {
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo35: ldo35 {
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	touchscreen@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
+		interrupt-parent = <&gpc3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_irq>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <200>;
+			syna,clip-x-high = <1079>;
+			syna,clip-y-high = <1919>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <121>;
+		};
+	};
+};
+
+&i2c7 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+		interrupt-parent = <&gpa2>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq>;
+
+		mount-matrix = "1",  "0",  "0",
+			       "0", "-1",  "0",
+			       "0",  "0", "-1";
+
+		st,drdy-int-pin = <1>;
+	};
+};
+
+&i2c8 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	proximity@48 {
+		compatible = "sensortek,stk3013", "sensortek,stk3310";
+		reg = <0x48>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&proxm_irq>;
+
+		proximity-near-level = <25>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	vmmc-supply = <&vdd_ldo26>;
+	vqmmc-supply = <&vdd_ldo27>;
+
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	non-removable;
+
+	status = "okay";
+};
+
+&mmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+
+	mmc-pwrseq = <&pwrseq_mmc1>;
+
+	bus-width = <4>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <0x1>;
+		interrupt-names = "host-wake";
+		interrupt-parent = <&gpa2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+
+	vmmc-supply = <&vdd_fixed_mmc2>;
+	vqmmc-supply = <&vdd_ldo2>;
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	broken-cd;
+	disable-wp;
+
+	status = "okay";
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	accel_irq: accel-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	dwmmc2_irq: dwmmc2-irq-pins {
+		samsung,pins = "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fuel_irq: fuel-irq-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_home: key-home-pins {
+		samsung,pins = "gpa1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	proxm_irq: proxm-irq-pins {
+		samsung,pins = "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	tkey_irq: tkey-irq-pins {
+		samsung,pins = "gpa1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	wlan_hostwake: wlan-hostwake-pins {
+		samsung,pins = "gpa2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_top {
+	bt_enable: bt-enable-pins {
+		samsung,pins = "gpd4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlan_enable: wlan-enable-pins {
+		samsung,pins = "gpd3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+		samsung,pin-val = <0>;
+	};
+};
+
+&pinctrl_touch {
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+
+		device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpd4 1 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3000000>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd33-supply = <&vdd_ldo8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7870-pinctrl.dtsi
new file mode 100644
index 000000000000..99a28d06aee7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870-pinctrl.dtsi
@@ -0,0 +1,1021 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7870 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	etc0: etc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	etc1: etc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	bt_btwake: bt-btwake-pins {
+		samsung,pins = "gpa1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_hostwake: bt-hostwake-pins {
+		samsung,pins = "gpa1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	gnss_sensor_i2c: gnss-sensor-i2c-pins {
+		samsung,pins = "gpa2-5", "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	gnss_sensor_irq: gnss-sensor-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	nfc_int: nfc-int-pins {
+		samsung,pins = "gpa2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpa1-1", "gpa1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_sleep: uart2-sleep-pins {
+		samsung,pins = "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_dispaud {
+	gpz0: gpz0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz1: gpz1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz2: gpz2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s_amp_bus: i2s-amp-bus-pins {
+		samsung,pins = "gpz1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_amp_bus_idle: i2s-amp-bus-idle-pins {
+		samsung,pins = "gpz1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_bt_bus: i2s-bt-bus-pins {
+		samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_bt_bus_idle: i2s-bt-bus-idle-pins {
+		samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_pmic_amp_bus: i2s-pmic-amp-bus-pins {
+		samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_pmic_amp_bus_idle: i2s-pmic-amp-bus-idle-pins {
+		samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_pmic_bus: i2s-pmic-bus-pins {
+		samsung,pins = "gpz1-0", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_pmic_bus_idle: i2s-pmic-bus-idle-pins {
+		samsung,pins = "gpz1-0", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_fm_bus: i2s-fm-bus-pins {
+		samsung,pins = "gpz2-0", "gpz2-1", "gpz2-2", "gpz2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_fm_bus_idle: i2s-fm-bus-idle-pins {
+		samsung,pins = "gpz2-0", "gpz2-1", "gpz2-2", "gpz2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+};
+
+&pinctrl_ese {
+	gpc7: gpc7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpc7-3", "gpc7-2", "gpc7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	spi0_cs0: spi0-cs0-pins {
+		samsung,pins = "gpc7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	spi0_cs1: spi0-cs1-pins {
+		samsung,pins = "gpc7-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_fsys {
+	gpr0: gpr0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr4: gpr4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_clk_fast_slew_rate_1x: sd0-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	sd0_clk_fast_slew_rate_2x: sd0-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	sd0_clk_fast_slew_rate_3x: sd0-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_clk_fast_slew_rate_4x: sd0-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_clk_fast_slew_rate_5x: sd0-clk-fast-slew-rate-5x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR5>;
+	};
+
+	sd0_clk_fast_slew_rate_6x: sd0-clk-fast-slew-rate-6x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_rdqs: sd0-rdqs-pins {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpr4-3", "gpr4-4", "gpr4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+};
+
+&pinctrl_mif {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpm0-1", "gpm0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_nfc {
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2c6_bus: i2c6-bus-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	nfc_en: nfc-en-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+		samsung,pin-val = <1>;
+	};
+
+	nfc_n5_clk_req: nfc-n5-clk-req-pins {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	nfc_pd: nfc-pd-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_top {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc5: gpc5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc6: gpc6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc8: gpc8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc9: gpc9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd3: gpd3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	decon_te_off: decon-te-off-pins {
+		samsung,pins = "gpe0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+	};
+
+	decon_te_on: decon-te-on-pins {
+		samsung,pins = "gpe0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	ese_pvdd_en: ese-pvdd-en-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	fimc_is_flash: fimc-is-flash-pins {
+		samsung,pins = "gpd3-2", "gpd3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_mclk0_fn: fimc-is-mclk0-fn-pins {
+		samsung,pins = "gpe0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	fimc_is_mclk0_in: fimc-is-mclk0-in-pins {
+		samsung,pins = "gpe0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_mclk0_out: fimc-is-mclk0-out-pins {
+		samsung,pins = "gpe0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	fimc_is_mclk1_fn: fimc-is-mclk1-fn-pins {
+		samsung,pins = "gpe0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	fimc_is_mclk1_in: fimc-is-mclk1-in-pins {
+		samsung,pins = "gpe0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_mclk1_out: fimc-is-mclk1-out-pins {
+		samsung,pins = "gpe0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	fimc_is_mclk2_fn: fimc-is-mclk2-fn-pins {
+		samsung,pins = "gpf4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	fimc_is_mclk2_out: fimc-is-mclk2-out-pins {
+		samsung,pins = "gpf4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+		samsung,pin-val = <0>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpf0-1", "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpf1-1", "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpf0-3", "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpf2-1", "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpf3-0", "gpf3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpc4-1", "gpc4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c2_bus: i2c2-bus-pins {
+		samsung,pins = "gpc8-1", "gpc8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
+		samsung,pins = "gpc9-1", "gpc9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c4_bus: i2c4-bus-pins {
+		samsung,pins = "gpc1-1", "gpc1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c5_bus: i2c5-bus-pins {
+		samsung,pins = "gpc1-3", "gpc1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c7_bus: i2c7-bus-pins {
+		samsung,pins = "gpc4-3", "gpc4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c8_bus: i2c8-bus-pins {
+		samsung,pins = "gpc5-1", "gpc5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	nfc_n5_firm: nfc-n5-firm-pins {
+		samsung,pins = "gpd4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-val = <1>;
+	};
+
+	nfc_pvdd_en: nfc-pvdd-en-pins {
+		samsung,pins = "gpd2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	pwm_tout0: pwm-tout0-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pwm_tout1: pwm-tout1-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpf3-3", "gpf3-2", "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_cs0: spi1-cs0-pins {
+		samsung,pins = "gpf3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_cs1: spi1-cs1-pins {
+		samsung,pins = "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpf4-3", "gpf4-2", "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi2_cs0: spi2-cs0-pins {
+		samsung,pins = "gpf4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi2_cs1: spi2-cs1-pins {
+		samsung,pins = "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpc6-0", "gpc6-2", "gpc6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_bus_suspend: spi3-bus-suspend-pins {
+		samsung,pins = "gpc6-0", "gpc6-2", "gpc6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpc6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpc4-2", "gpc5-0", "gpc5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_miso: spi4-miso-pins {
+		samsung,pins = "gpc5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	spi4_mosi_sck_ssn: spi4-mosi-sck-ssn-pins {
+		samsung,pins = "gpc5-1", "gpc4-2", "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	uart0_bus: uart0-bus-pins {
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pins = "gpd2-3", "gpd2-2", "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pins = "gpb0-3", "gpb0-2", "gpb0-1", "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+};
+
+&pinctrl_touch {
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		samsung,pins = "gpc3-1", "gpc3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	ese_cs_func: ese-cs-func-pins {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+		samsung,pin-val = <1>;
+	};
+
+	ese_cs_func_suspend: ese-cs-func-suspend-pins {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870.dtsi b/arch/arm64/boot/dts/exynos/exynos7870.dtsi
new file mode 100644
index 000000000000..d5d347623b90
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870.dtsi
@@ -0,0 +1,713 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7870 SoC device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+#include <dt-bindings/clock/samsung,exynos7870-cmu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos7870";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_dispaud;
+		pinctrl2 = &pinctrl_ese;
+		pinctrl3 = &pinctrl_fsys;
+		pinctrl4 = &pinctrl_mif;
+		pinctrl5 = &pinctrl_nfc;
+		pinctrl6 = &pinctrl_top;
+		pinctrl7 = &pinctrl_touch;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	oscclk: oscclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10100000 {
+			compatible = "samsung,exynos7870-chipid",
+				     "samsung,exynos4210-chipid";
+			reg = <0x10100000 0x100>;
+		};
+
+		cmu_peri: clock-controller@101f0000 {
+			compatible = "samsung,exynos7870-cmu-peri";
+			reg = <0x101f0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "bus", "spi0", "spi1", "spi2",
+				      "spi3", "spi4", "uart0", "uart1", "uart2";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_BUS>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI0>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI1>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI2>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI3>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI4>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART0>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART1>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART2>;
+		};
+
+		cmu_mif: clock-controller@10460000 {
+			compatible = "samsung,exynos7870-cmu-mif";
+			reg = <0x10460000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk";
+			clocks = <&oscclk>;
+		};
+
+		pmu_system_controller: system-controller@10480000 {
+			compatible = "samsung,exynos7870-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x10480000 0x10000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x080c>;
+				mode-bootloader = <0x1234567d>;
+				mode-download = <0x12345671>;
+				mode-recovery = <0x12345674>;
+			};
+		};
+
+		gic: interrupt-controller@104e1000 {
+			compatible = "arm,cortex-a15-gic";
+			reg = <0x104e1000 0x1000>,
+			      <0x104e2000 0x1000>,
+			      <0x104e4000 0x2000>,
+			      <0x104e6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <3>;
+		};
+
+		hsi2c0: i2c@10510000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x10510000 0x2000>;
+			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c0_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_mif CLK_GOUT_MIF_HSI2C_IPCLK>;
+
+			status = "disabled";
+		};
+
+		pinctrl_mif: pinctrl@10530000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x10530000 0x1000>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gpu: gpu@11400000 {
+			compatible = "samsung,exynos7870-mali", "arm,mali-t830";
+			reg = <0x11400000 0x5000>;
+			interrupt-names = "job", "mmu", "gpu";
+			interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "core", "bus";
+			clocks = <&cmu_g3d CLK_GOUT_G3D_CLK>,
+				 <&cmu_g3d CLK_GOUT_G3D_ASYNCS_D0_CLK>;
+
+			status = "disabled";
+		};
+
+		cmu_g3d: clock-controller@11460000 {
+			compatible = "samsung,exynos7870-cmu-g3d";
+			reg = <0x11460000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "switch";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_G3D_SWITCH>;
+		};
+
+		cmu_mfcmscl: clock-controller@12cb0000 {
+			compatible = "samsung,exynos7870-cmu-mfcmscl";
+			reg = <0x12cb0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "mfc", "mscl";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_MFCMSCL_MFC>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_MFCMSCL_MSCL>;
+		};
+
+		mmc0: mmc@13540000 {
+			compatible = "samsung,exynos7870-dw-mshc-smu";
+			reg = <0x13540000 0x2000>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "biu", "ciu";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MMC0_ACLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC0>;
+
+			status = "disabled";
+		};
+
+		mmc1: mmc@13550000 {
+			compatible = "samsung,exynos7870-dw-mshc-smu";
+			reg = <0x13550000 0x2000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "biu", "ciu";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MMC1_ACLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC1>;
+
+			status = "disabled";
+		};
+
+		mmc2: mmc@13560000 {
+			compatible = "samsung,exynos7870-dw-mshc-smu";
+			reg = <0x13560000 0x2000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "biu", "ciu";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MMC2_ACLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC2>;
+
+			status = "disabled";
+		};
+
+		usbdrd_phy: phy@135c0000 {
+			compatible = "samsung,exynos7870-usbdrd-phy";
+			reg = <0x135c0000 0x100>;
+			#phy-cells = <1>;
+
+			clock-names = "phy", "ref";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MUX_USB20DRD_PHYCLOCK_USER>,
+				 <&cmu_fsys CLK_GOUT_FSYS_MUX_USB_PLL>;
+
+			samsung,pmu-syscon = <&pmu_system_controller>;
+		};
+
+		usbdrd: usb@13600000 {
+			compatible = "samsung,exynos7870-dwusb3";
+			ranges = <0x0 0x13600000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			clock-names = "bus_early", "ref", "ctrl";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_ACLK_HSDRD>,
+				 <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_HSDRD_REF_CLK>,
+				 <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_HCLK_USB20_CTRL>;
+
+			status = "disabled";
+
+			usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+
+				phy-names = "usb2-phy";
+				phys = <&usbdrd_phy 0>;
+
+				usb-role-switch;
+				snps,usb2-gadget-lpm-disable;
+			};
+		};
+
+		cmu_fsys: clock-controller@13730000 {
+			compatible = "samsung,exynos7870-cmu-fsys";
+			reg = <0x13730000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "bus", "usb20drd";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_BUS>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_USB20DRD_REFCLK>;
+		};
+
+		pinctrl_fsys: pinctrl@13750000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x13750000 0x1000>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial0: serial@13800000 {
+			compatible = "samsung,exynos7870-uart",
+				     "samsung,exynos8895-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+
+			clock-names = "uart", "clk_uart_baud0";
+			clocks = <&cmu_peri CLK_GOUT_PERI_UART0_PCLK>,
+				 <&cmu_peri CLK_GOUT_PERI_UART0_EXT_UCLK>;
+
+			samsung,uart-fifosize = <16>;
+
+			status = "disabled";
+		};
+
+		serial1: serial@13810000 {
+			compatible = "samsung,exynos7870-uart",
+				     "samsung,exynos8895-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+
+			clock-names = "uart", "clk_uart_baud0";
+			clocks = <&cmu_peri CLK_GOUT_PERI_UART1_PCLK>,
+				 <&cmu_peri CLK_GOUT_PERI_UART1_EXT_UCLK>;
+
+			samsung,uart-fifosize = <256>;
+
+			status = "disabled";
+		};
+
+		serial2: serial@13820000 {
+			compatible = "samsung,exynos7870-uart",
+				     "samsung,exynos8895-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_bus>;
+
+			clock-names = "uart", "clk_uart_baud0";
+			clocks = <&cmu_peri CLK_GOUT_PERI_UART2_PCLK>,
+				 <&cmu_peri CLK_GOUT_PERI_UART2_EXT_UCLK>;
+
+			samsung,uart-fifosize = <256>;
+
+			status = "disabled";
+		};
+
+		i2c0: i2c@13830000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13830000 0x100>;
+			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C0_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@13840000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13840000 0x100>;
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C1_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c2: i2c@13850000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13850000 0x100>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C2_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c3: i2c@13860000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C3_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c4: i2c@13870000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C4_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c5: i2c@13880000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C5_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c6: i2c@13890000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C6_PCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c1: i2c@138a0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138a0000 0x1000>;
+			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c1_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C1_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c2: i2c@138b0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138b0000 0x1000>;
+			interrupts = <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c2_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C2_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c3: i2c@138c0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138c0000 0x1000>;
+			interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c3_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C3_IPCLK>;
+
+			status = "disabled";
+		};
+
+		i2c7: i2c@138d0000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x138d0000 0x100>;
+			interrupts = <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C7_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c8: i2c@138e0000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x138e0000 0x100>;
+			interrupts = <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c8_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C8_PCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c4: i2c@138f0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138f0000 0x1000>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c4_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C4_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c5: i2c@13950000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x13950000 0x1000>;
+			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c5_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C5_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c6: i2c@13960000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x13960000 0x1000>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c6_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C6_IPCLK>;
+
+			status = "disabled";
+		};
+
+		pinctrl_top: pinctrl@139b0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139b0000 0x1000>;
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_nfc: pinctrl@139c0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139c0000 0x1000>;
+			interrupts = <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_touch: pinctrl@139d0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139d0000 0x1000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_ese: pinctrl@139e0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139e0000 0x1000>;
+			interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_alive: pinctrl@139f0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139f0000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7870-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		cmu_isp: clock-controller@144d0000 {
+			compatible = "samsung,exynos7870-cmu-isp";
+			reg = <0x144d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "cam", "isp", "vra";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_ISP_CAM>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_ISP_ISP>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_ISP_VRA>;
+		};
+
+		pinctrl_dispaud: pinctrl@148c0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x148c0000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_dispaud: clock-controller@148d0000 {
+			compatible = "samsung,exynos7870-cmu-dispaud";
+			reg = <0x148d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "bus", "decon_eclk", "decon_vclk";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_BUS>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_ECLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_VCLK>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <26000000>;
+	};
+};
+
+#include "exynos7870-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
index 47a389d9ff7d..9d74fa6bfed9 100644
--- a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
@@ -32,7 +32,7 @@
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x3da00000>,
 		      <0x0 0xc0000000 0x40000000>,
-		      <0x8 0x80000000 0x40000000>;
+		      <0x8 0x80000000 0x80000000>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
index d69fc2392bd0..008228fb319a 100644
--- a/arch/arm64/boot/dts/exynos/exynos7885.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
@@ -172,7 +172,8 @@
 		ranges = <0x0 0x0 0x0 0x20000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos850-chipid";
+			compatible = "samsung,exynos7885-chipid",
+				     "samsung,exynos850-chipid";
 			reg = <0x10000000 0x24>;
 		};
 
@@ -264,7 +265,8 @@
 			reg = <0x11cb0000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos7-wakeup-eint";
+				compatible = "samsung,exynos7885-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 			};
@@ -289,12 +291,14 @@
 		};
 
 		pmu_system_controller: system-controller@11c80000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "samsung,exynos7885-pmu",
+				     "samsung,exynos7-pmu", "syscon";
 			reg = <0x11c80000 0x10000>;
 		};
 
 		mmc_0: mmc@13500000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos7885-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			reg = <0x13500000 0x2000>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -307,7 +311,8 @@
 		};
 
 		serial_0: serial@13800000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13800000 0x100>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -320,7 +325,8 @@
 		};
 
 		serial_1: serial@13810000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13810000 0x100>;
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -333,7 +339,8 @@
 		};
 
 		serial_2: serial@13820000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13820000 0x100>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -346,7 +353,8 @@
 		};
 
 		i2c_0: i2c@13830000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13830000 0x100>;
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -359,7 +367,8 @@
 		};
 
 		i2c_1: i2c@13840000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13840000 0x100>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -372,7 +381,8 @@
 		};
 
 		i2c_2: i2c@13850000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13850000 0x100>;
 			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -385,7 +395,8 @@
 		};
 
 		i2c_3: i2c@13860000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
 			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -398,7 +409,8 @@
 		};
 
 		i2c_4: i2c@13870000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -411,7 +423,8 @@
 		};
 
 		i2c_5: i2c@13880000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
 			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -424,7 +437,8 @@
 		};
 
 		i2c_6: i2c@13890000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
 			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -437,7 +451,8 @@
 		};
 
 		i2c_7: i2c@11cd0000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x11cd0000 0x100>;
 			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
index f074df8982b3..ab076d326a49 100644
--- a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
+++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
@@ -21,6 +21,7 @@
 	compatible = "winlink,e850-96", "samsung,exynos850";
 
 	aliases {
+		ethernet0 = &ethernet;
 		mmc0 = &mmc_0;
 		serial0 = &serial_0;
 	};
@@ -45,17 +46,9 @@
 		};
 	};
 
-	/*
-	 * RAM: 4 GiB (eMCP):
-	 *   - 2 GiB at 0x80000000
-	 *   - 2 GiB at 0x880000000
-	 *
-	 * 0xbab00000..0xbfffffff: secure memory (85 MiB).
-	 */
 	memory@80000000 {
 		device_type = "memory";
-		reg = <0x0 0x80000000 0x3ab00000>,
-		      <0x0 0xc0000000 0x40000000>,
+		reg = <0x0 0x80000000 0x80000000>,
 		      <0x8 0x80000000 0x80000000>;
 	};
 
@@ -146,6 +139,11 @@
 		#size-cells = <1>;
 		ranges;
 
+		secure_mem: memory@bab00000 {
+			reg = <0x0 0xbab00000 0x5500000>;
+			no-map;
+		};
+
 		ramoops@f0000000 {
 			compatible = "ramoops";
 			reg = <0x0 0xf0000000 0x200000>;
@@ -244,10 +242,24 @@
 };
 
 &usbdrd_dwc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	dr_mode = "otg";
 	usb-role-switch;
 	role-switch-default-mode = "host";
 
+	hub@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+
 	port {
 		usb1_drd_sw: endpoint {
 			remote-endpoint = <&usb_dr_connector>;
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index 53104e65b9c6..cb55015c8dce 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -93,6 +93,8 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0>;
 			enable-method = "psci";
+			clocks = <&cmu_cpucl0 CLK_CLUSTER0_SCLK>;
+			clock-names = "cluster0_clk";
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
@@ -117,6 +119,8 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x100>;
 			enable-method = "psci";
+			clocks = <&cmu_cpucl1 CLK_CLUSTER1_SCLK>;
+			clock-names = "cluster1_clk";
 		};
 		cpu5: cpu@101 {
 			device_type = "cpu";
@@ -184,6 +188,16 @@
 			clock-names = "fin_pll", "mct";
 		};
 
+		pdma0: dma-controller@120c0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x120c0000 0x1000>;
+			clocks = <&cmu_core CLK_GOUT_PDMA_CORE_ACLK>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			interrupts = <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>;
+			arm,pl330-broken-no-flushp;
+		};
+
 		gic: interrupt-controller@12a01000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -244,6 +258,28 @@
 				      "dout_peri_uart", "dout_peri_ip";
 		};
 
+		cmu_cpucl1: clock-controller@10800000 {
+			compatible = "samsung,exynos850-cmu-cpucl1";
+			reg = <0x10800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CPUCL1_SWITCH>,
+				 <&cmu_top CLK_DOUT_CPUCL1_DBG>;
+			clock-names = "oscclk", "dout_cpucl1_switch",
+				      "dout_cpucl1_dbg";
+		};
+
+		cmu_cpucl0: clock-controller@10900000 {
+			compatible = "samsung,exynos850-cmu-cpucl0";
+			reg = <0x10900000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CPUCL0_SWITCH>,
+				 <&cmu_top CLK_DOUT_CPUCL0_DBG>;
+			clock-names = "oscclk", "dout_cpucl0_switch",
+				      "dout_cpucl0_dbg";
+		};
+
 		cmu_g3d: clock-controller@11400000 {
 			compatible = "samsung,exynos850-cmu-g3d";
 			reg = <0x11400000 0x8000>;
@@ -359,7 +395,8 @@
 			reg = <0x11850000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos850-wakeup-eint";
+				compatible = "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -368,7 +405,8 @@
 			reg = <0x11c30000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos850-wakeup-eint";
+				compatible = "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -378,6 +416,14 @@
 			interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		trng: rng@12081400 {
+			compatible = "samsung,exynos850-trng";
+			reg = <0x12081400 0x100>;
+			clocks = <&cmu_core CLK_GOUT_SSS_ACLK>,
+				 <&cmu_core CLK_GOUT_SSS_PCLK>;
+			clock-names = "secss", "pclk";
+		};
+
 		pinctrl_hsi: pinctrl@13430000 {
 			compatible = "samsung,exynos850-pinctrl";
 			reg = <0x13430000 0x1000>;
@@ -396,7 +442,7 @@
 		};
 
 		rtc: rtc@11a30000 {
-			compatible = "samsung,s3c6410-rtc";
+			compatible = "samsung,exynos850-rtc", "samsung,s3c6410-rtc";
 			reg = <0x11a30000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -406,7 +452,8 @@
 		};
 
 		mmc_0: mmc@12100000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos850-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			reg = <0x12100000 0x2000>;
 			interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -419,7 +466,7 @@
 		};
 
 		i2c_0: i2c@13830000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13830000 0x100>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -432,7 +479,7 @@
 		};
 
 		i2c_1: i2c@13840000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13840000 0x100>;
 			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -445,7 +492,7 @@
 		};
 
 		i2c_2: i2c@13850000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13850000 0x100>;
 			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -458,7 +505,7 @@
 		};
 
 		i2c_3: i2c@13860000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
 			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -471,7 +518,7 @@
 		};
 
 		i2c_4: i2c@13870000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
 			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -485,7 +532,7 @@
 
 		/* I2C_5 (also called CAM_PMIC_I2C in TRM) */
 		i2c_5: i2c@13880000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
 			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -499,7 +546,7 @@
 
 		/* I2C_6 (also called MOTOR_I2C in TRM) */
 		i2c_6: i2c@13890000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
 			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -604,7 +651,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138200c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -630,7 +677,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138a00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1020>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -640,7 +687,8 @@
 			status = "disabled";
 
 			hsi2c_0: i2c@138a0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138a0000 0xc0>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -658,7 +706,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138b00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1030>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -668,7 +716,8 @@
 			status = "disabled";
 
 			hsi2c_1: i2c@138b0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138b0000 0xc0>;
 				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -686,7 +735,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138c00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1040>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -696,7 +745,8 @@
 			status = "disabled";
 
 			hsi2c_2: i2c@138c0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138c0000 0xc0>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -714,7 +764,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x139400c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1050>;
-			samsung,mode = <USI_V2_SPI>;
+			samsung,mode = <USI_MODE_SPI>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -722,13 +772,31 @@
 				 <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
 			clock-names = "pclk", "ipclk";
 			status = "disabled";
+
+			spi_0: spi@13940000 {
+				compatible = "samsung,exynos850-spi";
+				reg = <0x13940000 0x30>;
+				clocks = <&cmu_peri CLK_GOUT_SPI0_PCLK>,
+					 <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
+				clock-names = "spi", "spi_busclk0";
+				dmas = <&pdma0 5>, <&pdma0 4>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi0_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				samsung,spi-src-clk = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		usi_cmgp0: usi@11d000c0 {
 			compatible = "samsung,exynos850-usi";
 			reg = <0x11d000c0 0x20>;
 			samsung,sysreg = <&sysreg_cmgp 0x2000>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -738,7 +806,8 @@
 			status = "disabled";
 
 			hsi2c_3: i2c@11d00000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x11d00000 0xc0>;
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -762,13 +831,31 @@
 				clock-names = "uart", "clk_uart_baud0";
 				status = "disabled";
 			};
+
+			spi_1: spi@11d00000 {
+				compatible = "samsung,exynos850-spi";
+				reg = <0x11d00000 0x30>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
+				clock-names = "spi", "spi_busclk0";
+				dmas = <&pdma0 12>, <&pdma0 13>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi1_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				samsung,spi-src-clk = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		usi_cmgp1: usi@11d200c0 {
 			compatible = "samsung,exynos850-usi";
 			reg = <0x11d200c0 0x20>;
 			samsung,sysreg = <&sysreg_cmgp 0x2010>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -778,7 +865,8 @@
 			status = "disabled";
 
 			hsi2c_4: i2c@11d20000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x11d20000 0xc0>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -802,6 +890,24 @@
 				clock-names = "uart", "clk_uart_baud0";
 				status = "disabled";
 			};
+
+			spi_2: spi@11d20000 {
+				compatible = "samsung,exynos850-spi";
+				reg = <0x11d20000 0x30>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
+				clock-names = "spi", "spi_busclk0";
+				dmas = <&pdma0 14>, <&pdma0 15>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi2_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				samsung,spi-src-clk = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts b/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts
new file mode 100644
index 000000000000..61e064af3337
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S8 (dreamlte/SM-G950F) device tree source
+ *
+ * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+/dts-v1/;
+#include "exynos8895.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	model = "Samsung Galaxy S8 (SM-G950F)";
+	compatible = "samsung,dreamlte", "samsung,exynos8895";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer: framebuffer@cc000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xcc000000 (1440 * 2960 * 4)>;
+			width = <1440>;
+			height = <2960>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x3c800000>,
+		      <0x0 0xc0000000 0x40000000>,
+		      <0x8 0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@92000000 {
+			compatible = "ramoops";
+			reg = <0 0x92000000 0x8000>;
+			record-size = <0x4000>;
+			console-size = <0x4000>;
+		};
+
+		cont_splash_mem: framebuffer@cc000000 {
+			reg = <0 0xcc000000 (1440 * 2960 * 4)>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup &key_wink>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Typically used for Bixby. Map it as a camera button for now */
+		wink-key {
+			label = "Camera";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&gpa0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	/* TODO: Remove once PMIC is implemented  */
+	reg_placeholder: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg-placeholder";
+	};
+};
+
+&hsi2c_23 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+
+		/* TODO: Update once PMIC is implemented */
+		avdd-supply = <&reg_placeholder>;
+		vdd-supply = <&reg_placeholder>;
+
+		interrupt-parent = <&gpa1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts_int>;
+		pinctrl-names = "default";
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&mmc {
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &sd2_cd>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpa1 5 GPIO_ACTIVE_LOW>;
+	clock-frequency = <800000000>;
+	disable-wp;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+
+	/* TODO: Add regulators once PMIC is implemented */
+
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+
+	status = "okay";
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	key_wink: key-wink-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	ts_int: ts-int-pins {
+		samsung,pins = "gpa1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&usi9 {
+	samsung,mode = <USI_MODE_I2C0_1>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
new file mode 100644
index 000000000000..16903ce63a32
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
@@ -0,0 +1,1094 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 8895 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_abox {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	bt_hostwake: bt-hostwake-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pcie_wake: pcie-wake-pins {
+		samsung,pins = "gpa3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpa4-4", "gpa4-3", "gpa4-2", "gpa4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	wlan_host_wake: wlan-host-wake-pins {
+		  samsung,pins = "gpa0-7";
+		  samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		  samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		  samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		  samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_busc {
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpb2-1", "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	speedy_bus: speedy-bus-pins {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpi0: gpi0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpi1: gpi1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gpi0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpi0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpj0: gpj0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	bt_btwake: bt-btwake-pins {
+		samsung,pins = "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_en: bt-en-pins {
+		samsung,pins = "gpj1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	cfg_wlanen: cfg-wlanen-pins {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpj0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpj0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpj0-3", "gpj0-4", "gpj0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	/* For Drive strength swapping */
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd3: gpd3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe7: gpe7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpd1-7", "gpd1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpd3-3", "gpd3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c14_bus: hs-i2c14-bus-pins {
+		samsung,pins = "gpe6-3", "gpe6-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpd1-7", "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpd1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpd2-3", "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpd2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpd3-3", "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpd3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpd0-7", "gpd0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus: uart3-bus-pins {
+		samsung,pins = "gpd1-7", "gpd1-6", "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus: uart4-bus-pins {
+		samsung,pins = "gpd2-3", "gpd2-2", "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus: uart5-bus-pins {
+		samsung,pins = "gpd3-3", "gpd3-2", "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe2: gpe2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe3: gpe3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe4: gpe4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe5: gpe5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe6: gpe6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hrm_irq: hrm-irq-pins {
+		samsung,pins = "gpe6-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpc2-3", "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpc2-7", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpe5-3", "gpe5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpe1-3", "gpe1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpe1-7", "gpe1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpe2-3", "gpe2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpe2-7", "gpe2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpe3-3", "gpe3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpe3-7", "gpe3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpe4-3", "gpe4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpe4-7", "gpe4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpe5-7", "gpe5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpc3-3", "gpc3-2", "gpc3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpc3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpc3-7", "gpc3-6", "gpc3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpc3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpe5-3", "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpe5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpe1-3", "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpe1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpe1-7", "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpe1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpe2-3", "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpe2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpe2-7", "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpe2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpe3-3", "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpe3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpe3-7", "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpe3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpe4-3", "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpe4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpe4-7", "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpe4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpe5-7", "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpe5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart6_bus: uart6-bus-pins {
+		samsung,pins = "gpe5-3", "gpe5-2", "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus: uart7-bus-pins {
+		samsung,pins = "gpe1-3", "gpe1-2", "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus: uart8-bus-pins {
+		samsung,pins = "gpe1-7", "gpe1-6", "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus: uart9-bus-pins {
+		samsung,pins = "gpe2-3", "gpe2-2", "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus: uart10-bus-pins {
+		samsung,pins = "gpe2-7", "gpe2-6", "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus: uart11-bus-pins {
+		samsung,pins = "gpe3-3", "gpe3-2", "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus: uart12-bus-pins {
+		samsung,pins = "gpe3-7", "gpe3-6", "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus: uart13-bus-pins {
+		samsung,pins = "gpe4-3", "gpe4-2", "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus: uart14-bus-pins {
+		samsung,pins = "gpe4-7", "gpe4-6", "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpe5-7", "gpe5-6", "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_vts {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
new file mode 100644
index 000000000000..f92d2a8a20a2
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
@@ -0,0 +1,1374 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 8895 SoC device tree source
+ *
+ * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/clock/samsung,exynos8895.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos8895";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_abox;
+		pinctrl2 = &pinctrl_vts;
+		pinctrl3 = &pinctrl_fsys0;
+		pinctrl4 = &pinctrl_fsys1;
+		pinctrl5 = &pinctrl_busc;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu4: cpu@0 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@1 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@2 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@3 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	oscclk: osc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	pmu-mongoose-m2 {
+		compatible = "samsung,mongoose-pmu";
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>,
+				     <&cpu5>,
+				     <&cpu6>,
+				     <&cpu7>;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+		cpu_suspend = <0xc4000001>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos8895-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		cmu_peris: clock-controller@10010000 {
+			compatible = "samsung,exynos8895-cmu-peris";
+			reg = <0x10010000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIS_BUS>;
+			clock-names = "oscclk", "bus";
+		};
+
+		timer@10040000 {
+			compatible = "samsung,exynos8895-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x10040000 0x800>;
+			clocks = <&oscclk>, <&cmu_peris CLK_GOUT_PERIS_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@10201000 {
+			compatible = "arm,gic-400";
+			reg = <0x10201000 0x1000>,
+			      <0x10202000 0x1000>,
+			      <0x10204000 0x2000>,
+			      <0x10206000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			#address-cells = <0>;
+			#size-cells = <1>;
+		};
+
+		cmu_peric0: clock-controller@10400000 {
+			compatible = "samsung,exynos8895-cmu-peric0";
+			reg = <0x10400000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_UART_DBG>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_USI00>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_USI01>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_USI02>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_USI03>;
+			clock-names = "oscclk", "bus", "uart", "usi0",
+				      "usi1", "usi2", "usi3";
+		};
+
+		syscon_peric0: syscon@10420000 {
+			compatible = "samsung,exynos8895-peric0-sysreg", "syscon";
+			reg = <0x10420000 0x2000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_SYSREG_PERIC0_PCLK>;
+		};
+
+		serial_0: serial@10430000 {
+			compatible = "samsung,exynos8895-uart";
+			reg = <0x10430000 0x100>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_UART_DBG_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_UART_DBG_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
+		usi0: usi@10440000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10440000 0x11000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric0 0x1000>;
+			status = "disabled";
+
+			hsi2c_5: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_2: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart2_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_2: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi2_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_6: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c6_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi1: usi@10460000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10460000 0x11000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric0 0x1004>;
+			status = "disabled";
+
+			hsi2c_7: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_3: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart3_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_3: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi3_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_8: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c8_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi2: usi@10480000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10480000 0x11000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric0 0x1008>;
+			status = "disabled";
+
+			hsi2c_9: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c9_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_4: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart4_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_4: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi4_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_10: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c10_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi3: usi@104a0000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x104a0000 0x11000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric0 0x100c>;
+			status = "disabled";
+
+			hsi2c_11: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c11_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_5: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart5_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_5: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi5_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_12: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c12_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_peric0: pinctrl@104d0000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x104d0000 0x1000>;
+			interrupts = <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_peric1: clock-controller@10800000 {
+			compatible = "samsung,exynos8895-cmu-peric1";
+			reg = <0x10800000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_SPEEDY2>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_SPI_CAM0>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_SPI_CAM1>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_UART_BT>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI04>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI05>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI06>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI07>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI08>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI09>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI10>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI11>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI12>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI13>;
+			clock-names = "oscclk", "bus", "speedy", "cam0",
+				      "cam1", "uart", "usi4", "usi5",
+				      "usi6", "usi7", "usi8", "usi9",
+				      "usi10", "usi11", "usi12", "usi13";
+		};
+
+		syscon_peric1: syscon@10820000 {
+			compatible = "samsung,exynos8895-peric1-sysreg", "syscon";
+			reg = <0x10820000 0x2000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SYSREG_PERIC1_PCLK>;
+		};
+
+		serial_1: serial@10830000 {
+			compatible = "samsung,exynos8895-uart";
+			reg = <0x10830000 0x100>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_UART_BT_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_UART_BT_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
+		usi4: usi@10840000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10840000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1008>;
+			status = "disabled";
+
+			hsi2c_13: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c13_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_6: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart6_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_6: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi6_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_14: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c14_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5: usi@10860000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10860000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x100c>;
+			status = "disabled";
+
+			hsi2c_15: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c15_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_7: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart7_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_7: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi7_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_16: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c16_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi6: usi@10880000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10880000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1010>;
+			status = "disabled";
+
+			hsi2c_17: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c17_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_8: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart8_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_8: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi8_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_18: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c18_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi7: usi@108a0000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x108a0000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1014>;
+			status = "disabled";
+
+			hsi2c_19: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c19_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_9: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart9_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_9: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi9_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_20: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c20_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi8: usi@108c0000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x108c0000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1018>;
+			status = "disabled";
+
+			hsi2c_21: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c21_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_10: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart10_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_10: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi10_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_22: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c22_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi9: usi@108e0000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x108e0000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x101c>;
+			status = "disabled";
+
+			hsi2c_23: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c23_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_11: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart11_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_11: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi11_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_24: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c24_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi10: usi@10900000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10900000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1020>;
+			status = "disabled";
+
+			hsi2c_25: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c25_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_12: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart12_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_12: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi12_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_26: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c26_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi11: usi@10920000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10920000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1024>;
+			status = "disabled";
+
+			hsi2c_27: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c27_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_13: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart13_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_13: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi13_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_28: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c28_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi12: usi@10940000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10940000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1028>;
+			status = "disabled";
+
+			hsi2c_29: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c29_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_14: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart14_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_14: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi14_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_30: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c30_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi13: usi@10960000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10960000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x102c>;
+			status = "disabled";
+
+			hsi2c_31: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c31_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_15: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart15_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_15: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi15_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_32: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c32_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_peric1: pinctrl@10980000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x10980000 0x1000>;
+			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsi2c_1: i2c@10990000 {
+			compatible = "samsung,exynos8895-hsi2c";
+			reg = <0x10990000 0x1000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_HSI2C_CAM0_IPCLK>;
+			clock-names = "hsi2c";
+			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&hsi2c1_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		hsi2c_2: i2c@109a0000 {
+			compatible = "samsung,exynos8895-hsi2c";
+			reg = <0x109a0000 0x1000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_HSI2C_CAM1_IPCLK>;
+			clock-names = "hsi2c";
+			interrupts = <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&hsi2c2_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		hsi2c_3: i2c@109b0000 {
+			compatible = "samsung,exynos8895-hsi2c";
+			reg = <0x109b0000 0x1000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_HSI2C_CAM2_IPCLK>;
+			clock-names = "hsi2c";
+			interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&hsi2c3_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		hsi2c_4: i2c@109c0000 {
+			compatible = "samsung,exynos8895-hsi2c";
+			reg = <0x109c0000 0x1000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_HSI2C_CAM3_IPCLK>;
+			clock-names = "hsi2c";
+			interrupts = <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&hsi2c4_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		spi_0: spi@109d0000 {
+			compatible = "samsung,exynos8895-spi",
+				     "samsung,exynos850-spi";
+			reg = <0x109d0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SPI_CAM0_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_SPI_CAM0_SPI_EXT_CLK>;
+			clock-names = "spi", "spi_busclk0";
+			interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi0_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		spi_1: spi@109e0000 {
+			compatible = "samsung,exynos8895-spi",
+				     "samsung,exynos850-spi";
+			reg = <0x109e0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SPI_CAM1_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_SPI_CAM1_SPI_EXT_CLK>;
+			clock-names = "spi", "spi_busclk0";
+			interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi1_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		cmu_fsys0: clock-controller@11000000 {
+			compatible = "samsung,exynos8895-cmu-fsys0";
+			reg = <0x11000000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS0_DPGTC>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS0_MMC_EMBD>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS0_UFS_EMBD>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS0_USBDRD30>;
+			clock-names = "oscclk", "bus", "dpgtc", "mmc",
+				      "ufs", "usbdrd30";
+		};
+
+		syscon_fsys0: syscon@11020000 {
+			compatible = "samsung,exynos8895-fsys0-sysreg", "syscon";
+			reg = <0x11020000 0x2000>;
+			clocks = <&cmu_fsys0 CLK_GOUT_FSYS0_SYSREG_FSYS0_PCLK>;
+		};
+
+		pinctrl_fsys0: pinctrl@11050000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x11050000 0x1000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_fsys1: clock-controller@11400000 {
+			compatible = "samsung,exynos8895-cmu-fsys1";
+			reg = <0x11400000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS1_PCIE>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS1_UFS_CARD>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS1_MMC_CARD>;
+			clock-names = "oscclk", "bus", "pcie", "ufs", "mmc";
+		};
+
+		syscon_fsys1: syscon@11420000 {
+			compatible = "samsung,exynos8895-fsys1-sysreg", "syscon";
+			reg = <0x11420000 0x2000>;
+			clocks = <&cmu_fsys1 CLK_GOUT_FSYS1_SYSREG_FSYS1_PCLK>;
+		};
+
+		pinctrl_fsys1: pinctrl@11430000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x11430000 0x1000>;
+			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		mmc: mmc@11500000 {
+			compatible = "samsung,exynos8895-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
+			reg = <0x11500000 0x2000>;
+			assigned-clocks = <&cmu_top CLK_MOUT_CMU_FSYS1_MMC_CARD>;
+			assigned-clock-parents = <&cmu_top CLK_FOUT_SHARED4_PLL>;
+			clocks = <&cmu_fsys1 CLK_GOUT_FSYS1_MMC_CARD_I_ACLK>,
+				 <&cmu_fsys1 CLK_GOUT_FSYS1_MMC_CARD_SDCLKIN>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <64>;
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pinctrl_abox: pinctrl@13e60000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x13e60000 0x1000>;
+		};
+
+		pinctrl_vts: pinctrl@14080000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x14080000 0x1000>;
+		};
+
+		pinctrl_busc: pinctrl@15a30000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x15a30000 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_top: clock-controller@15a80000 {
+			compatible = "samsung,exynos8895-cmu-top";
+			reg = <0x15a80000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&oscclk>;
+			clock-names = "oscclk";
+		};
+
+		pmu_system_controller: system-controller@16480000 {
+			compatible = "samsung,exynos8895-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x16480000 0x10000>;
+		};
+
+		pinctrl_alive: pinctrl@164b0000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x164b0000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos8895-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <26000000>;
+	};
+};
+
+#include "exynos8895-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
new file mode 100644
index 000000000000..88091bf09e4e
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 9810 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
+ */
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	etc1: etc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_chub {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_cmgp {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm5: gpm5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm6: gpm6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm7: gpm7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm10: gpm10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm11: gpm11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm12: gpm12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm13: gpm13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm14: gpm14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm15: gpm15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm16: gpm16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm17: gpm17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm40: gpm40-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm41: gpm41-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm42: gpm42-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm43: gpm43-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_vts {
+	gpt0: gpt0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts b/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts
new file mode 100644
index 000000000000..fc0ddfee4cd6
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S9 (starlte/SM-G960F) device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
+ */
+
+/dts-v1/;
+#include "exynos9810.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Samsung Galaxy S9 (SM-G960F)";
+	compatible = "samsung,starlte", "samsung,exynos9810";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@cc000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xcc000000 (1440 * 2960 * 4)>;
+			width = <1440>;
+			height = <2960>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup &key_wink>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		/* In stock firmware used for assistant. Map it as a camera button for now */
+		wink-key {
+			label = "Camera";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&gpa0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x3c800000>,
+		      <0x0 0xc0000000 0x20000000>,
+		      <0x0 0xe1900000 0x1e700000>,
+		      <0x8 0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@cc000000 {
+			reg = <0x0 0xcc000000 (1440 * 2960 * 4)>;
+			no-map;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_wink: key-wink-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos9810.dtsi b/arch/arm64/boot/dts/exynos/exynos9810.dtsi
new file mode 100644
index 000000000000..01eba31f7ca3
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos9810.dtsi
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Exynos 9810 SoC device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos9810";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_chub;
+		pinctrl3 = &pinctrl_cmgp;
+		pinctrl4 = &pinctrl_fsys0;
+		pinctrl5 = &pinctrl_fsys1;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+		pinctrl8 = &pinctrl_vts;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	oscclk: osc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	pmu-mongoose-m3 {
+		compatible = "samsung,mongoose-pmu";
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>,
+				     <&cpu5>,
+				     <&cpu6>,
+				     <&cpu7>;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+		cpu_suspend = <0xc4000001>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos9810-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		gic: interrupt-controller@10101000 {
+			compatible = "arm,gic-400";
+			reg = <0x10101000 0x1000>,
+			      <0x10102000 0x1000>,
+			      <0x10104000 0x2000>,
+			      <0x10106000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			#address-cells = <0>;
+			#size-cells = <1>;
+		};
+
+		pinctrl_peric0: pinctrl@10430000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x10430000 0x1000>;
+			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric1: pinctrl@10830000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x10830000 0x1000>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys0: pinctrl@11050000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x11050000 0x1000>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys1: pinctrl@11430000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x11430000 0x1000>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_vts: pinctrl@13880000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x13880000 0x1000>;
+		};
+
+		pinctrl_chub: pinctrl@13a80000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x13a80000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_alive: pinctrl@14050000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x14050000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos9810-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@14060000 {
+			compatible = "samsung,exynos9810-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x14060000 0x10000>;
+		};
+
+		pinctrl_cmgp: pinctrl@14220000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x14220000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos9810-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_aud: pinctrl@17c60000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x17c60000 0x1000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <26000000>;
+	};
+};
+
+#include "exynos9810-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos990-c1s.dts b/arch/arm64/boot/dts/exynos/exynos990-c1s.dts
new file mode 100644
index 000000000000..9f0ad4f9673a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-c1s.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy Note20 5G (c1s/SM-N981B) device tree source
+ *
+ * Copyright (c) 2024, Igor Belwon <igor.belwon@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy Note20";
+	compatible = "samsung,c1s", "samsung,exynos990";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@f1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xf1000000 0 (1080 * 2400 * 4)>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ab00000>,
+		      /* Memory hole */
+		      <0x0 0xc1200000 0x0 0x1ee00000>,
+		      /* Memory hole */
+		      <0x0 0xe1900000 0x0 0x1e700000>,
+		      /* Memory hole - last block */
+		      <0x8 0x80000000 0x1 0x7ec00000>;
+	};
+
+	/* TODO: Remove this once PMIC is implemented */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: framebuffer@f1000000 {
+			reg = <0 0xf1000000 0 0x13c6800>;
+			no-map;
+		};
+
+		abox_reserved: audio@f7fb0000 {
+			reg = <0 0xf7fb0000 0 0x2a50000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos990-pinctrl.dtsi
new file mode 100644
index 000000000000..a03d36458d76
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-pinctrl.dtsi
@@ -0,0 +1,2195 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Exynos 990 pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2024, Igor Belwon <igor.belwon@mentallysanemainliners.org>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	speedy_bus: speedy-bus-pins {
+		samsung,pins = "gpq0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	speedy1_bus: speedy1-bus-pins {
+		samsung,pins = "gpq0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* UART1 is also referred to as UART_BT in downstream. */
+	uart1_bus_single: uart1-bus-pins {
+		samsung,pins = "gpq0-3", "gpq0-2", "gpq0-1", "gpq0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	uart1_rxd_pull: uart1-bus-rxd-pins {
+		samsung,pins = "gpq0-0";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	uart1_bus_rts: uart1-bus-rts-pins {
+		samsung,pins = "gpq0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus_tx_input: uart1-bus-tx-input-pins {
+		samsung,pins = "gpq0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	uart1_bus_tx_dat: uart1-bus-tx-dat-pins {
+		samsung,pins = "gpq0-1";
+	};
+
+	uart1_bus_tx_con: uart1-bus-tx-con-pins {
+		samsung,pins = "gpq0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+	};
+
+	wlan_host_wake: wlan-host-wake-pins {
+		samsung,pins = "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_cmgp {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm5: gpm5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm6: gpm6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm7: gpm7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm8: gpm8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm9: gpm9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm10: gpm10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm11: gpm11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm12: gpm12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm13: gpm13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm14: gpm14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm15: gpm15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm16: gpm16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm17: gpm17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm18: gpm18-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm19: gpm19-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm20: gpm20-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm21: gpm21-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm22: gpm22-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm23: gpm23-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm24: gpm24-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm25: gpm25-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm26: gpm26-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm27: gpm27-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm28: gpm28-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm29: gpm29-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm30: gpm30-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm31: gpm31-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm32: gpm32-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm33: gpm33-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	hsi2c38_bus: hsi2c38-bus-pins {
+		samsung,pins = "gpm0-0", "gpm1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c39_bus: hsi2c39-bus-pins {
+		samsung,pins = "gpm2-0", "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c40_bus: hsi2c40-bus-pins {
+		samsung,pins = "gpm4-0", "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c41_bus: hsi2c41-bus-pins {
+		samsung,pins = "gpm6-0", "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c42_bus: hsi2c42-bus-pins {
+		samsung,pins = "gpm8-0", "gpm9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c43_bus: hsi2c43-bus-pins {
+		samsung,pins = "gpm10-0", "gpm11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c44_bus: hsi2c44-bus-pins {
+		samsung,pins = "gpm12-0", "gpm13-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c45_bus: hsi2c45-bus-pins {
+		samsung,pins = "gpm14-0", "gpm15-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi19_bus: spi19-bus-pins {
+		samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi19_cs: spi19-cs-pins {
+		samsung,pins = "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi19_cs_func: spi19-cs-func-pins {
+		samsung,pins = "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi20_bus: spi20-bus-pins {
+		samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi20_cs: spi20-cs-pins {
+		samsung,pins = "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi20_cs_func: spi20-cs-func-pins {
+		samsung,pins = "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi21_bus: spi21-bus-pins {
+		samsung,pins = "gpm8-0", "gpm9-0", "gpm10-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi21_cs: spi21-cs-pins {
+		samsung,pins = "gpm11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi21_cs_func: spi21-cs-func-pins {
+		samsung,pins = "gpm11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi22_bus: spi22-bus-pins {
+		samsung,pins = "gpm12-0", "gpm13-0", "gpm14-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi22_cs: spi22-cs-pins {
+		samsung,pins = "gpm15-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi22_cs_func: spi22-cs-func-pins {
+		samsung,pins = "gpm15-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart21_bus_single: uart21-bus-pins {
+		samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart21_bus_dual: uart21-bus-dual-pins {
+		samsung,pins = "gpm0-0", "gpm1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart22_bus_single: uart22-bus-pins {
+		samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart22_bus_dual: uart22-bus-dual-pins {
+		samsung,pins = "gpm4-0", "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart23_bus_single: uart23-bus-pins {
+		samsung,pins = "gpm8-0", "gpm9-0", "gpm10-0", "gpm11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart23_bus_dual: uart23-bus-dual-pins {
+		samsung,pins = "gpm8-0", "gpm9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart24_bus_single: uart24-bus-pins {
+		samsung,pins = "gpm12-0", "gpm13-0", "gpm14-0", "gpm15-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart24_bus_dual: uart24-bus-dual-pins {
+		samsung,pins = "gpm12-0", "gpm13-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie0_clkreq: pcie0-clkreq-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie0_perst: pcie0-perst-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie1_clkreq: pcie1-clkreq-pins {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie1_perst: pcie1-perst-pins {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gpf2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV3>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpf1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpf1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpf1-3", "gpf1-4", "gpf1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV1>;
+	};
+
+	sd2_clk_fast_slew_rate_1_5x: sd2-clk-fast-slew-rate-1-5x-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV1_5>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	};
+
+	sd2_clk_fast_slew_rate_2_5x: sd2-clk-fast-slew-rate-2-5x-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fas-slew-rate-3x-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV3>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV4>;
+	};
+
+	sd2_pins_as_pdn: sd2-pins-as-pdn-pins {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", "gpf1-4", "gpf1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie2_clkreq: pcie2-clkreq-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie2_perst: pcie2-perst-pins {
+		samsung,pins = "gpf3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-1", "gpp0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-5", "gpp0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-1", "gpp1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-5", "gpp1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-1", "gpp2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi4_fp_inactive: spi4-fp-inactive-pins {
+		samsung,pins = "gpp2-3", "gpp2-2", "gpp2-1", "gpp2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi4_fp_cs_func_high: spi4-fp-cs-func-high-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-5", "gpp2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-5", "gpp3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi15_cs_func: spi15-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp4-6", "gpp4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	uart2_bus_single: uart2-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_single: uart3-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_single: uart4-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_single: uart5-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_single: uart6-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_single: uart7-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_single: uart15-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_single: uart16-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_dual: uart16-bus-dual-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_single: uart17-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_dual: uart17-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_i2s0_bus: aud-i2s0-bus-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s0_idle: aud-i2s0-idle-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_bus: aud-i2s1-bus-pins {
+		samsung,pins = "gpb0-4", "gpb0-5", "gpb0-6", "gpb0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s1_idle: aud-i2s1-idle-pins {
+		samsung,pins = "gpb0-4", "gpb0-5", "gpb0-6", "gpb0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s2_bus: aud-i2s2-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s2_idle: aud-i2s2-idle-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s3_bus: aud-i2s3-bus-pins {
+		samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s3_idle: aud-i2s3-idle-pins {
+		samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s4_bus: aud-i2s4-bus-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s4_pci: aud-i2s4-pci-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s4_idle: aud-i2s4-idle-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s5_bus: aud-i2s5-bus-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s5_idle: aud-i2s5-idle-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_dsd_bus: aud-dsd-bus-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_dsd_idle: aud-dsd-idle-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	cfg_wlanen: cfg-wlanen-pins {
+		samsung,pins = "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	cnss_wlan_en_active: cnss-wlan-en-active-pins {
+		samsung,pins = "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	cnss_wlan_en_sleep: cnss-wlan-en-sleep-pins {
+		samsung,pins = "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	decon_f_te_on: decon-f-te-on-pins {
+		samsung,pins = "gpc0-4";
+		samsung,pin-function = <0xf>;
+	};
+
+	decon_f_te_off: decon-f-te-off-pins {
+		samsung,pins = "gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+	};
+
+	decon_s_te_on: decon-s-te-on-pins {
+		samsung,pins = "gpc0-5";
+		samsung,pin-function = <0xf>;
+	};
+
+	decon_s_te_off: decon-s-te-off-pins {
+		samsung,pins = "gpc0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp6-2", "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp6-4", "gpp6-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp6-6", "gpp6-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpp8-4", "gpp8-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c33_bus: hsi2c33-bus-pins {
+		samsung,pins = "gpp8-6", "gpp8-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c34_bus: hsi2c34-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c35_bus: hsi2c35-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c36_bus: hsi2c36-bus-pins {
+		samsung,pins = "gpp9-4", "gpp9-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c37_bus: hsi2c37-bus-pins {
+		samsung,pins = "gpp9-6", "gpp9-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk0_out: sensor-mclk0-out-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk1_out: sensor-mclk1-out-pins {
+		samsung,pins = "gpg1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk2_out: sensor-mclk2-out-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk3_out: sensor-mclk3-out-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk4_out: sensor-mclk4-out-pins {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk5_out: sensor-mclk5-out-pins {
+		samsung,pins = "gpg1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk0_fn: sensor-mclk0-fn-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk1_fn: sensor-mclk1-fn-pins {
+		samsung,pins = "gpg1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk2_fn: sensor-mclk2-fn-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk3_fn: sensor-mclk3-fn-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk4_fn: sensor-mclk4-fn-pins {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk5_fn: sensor-mclk5-fn-pins {
+		samsung,pins = "gpg1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-1", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp5-6", "gpp5-5", "gpp5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp6-2", "gpp6-1", "gpp6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp6-6", "gpp6-5", "gpp6-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp6-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp6-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-5", "gpp7-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-1", "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi16_bus: spi16-bus-pins {
+		samsung,pins = "gpp8-6", "gpp8-5", "gpp8-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs: spi16-cs-pins {
+		samsung,pins = "gpp8-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi16_cs_func: spi16-cs-func-pins {
+		samsung,pins = "gpp8-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_bus: spi17-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-1", "gpp9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi17_cs: spi17-cs-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi17_cs_func: spi17-cs-func-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi18_bus: spi18-bus-pins {
+		samsung,pins = "gpp9-6", "gpp9-5", "gpp9-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi18_cs: spi18-cs-pins {
+		samsung,pins = "gpp9-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi18_cs_func: spi18-cs-func-pins {
+		samsung,pins = "gpp9-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart8_bus_single: uart8-bus-pins {
+		samsung,pins = "gpp5-3", "gpp5-2", "gpp5-1", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_single: uart9-bus-pins {
+		samsung,pins = "gpp5-7", "gpp5-6", "gpp5-5", "gpp5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_single: uart10-bus-pins {
+		samsung,pins = "gpp6-3", "gpp6-2", "gpp6-1", "gpp6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_single: uart11-bus-pins {
+		samsung,pins = "gpp6-7", "gpp6-6", "gpp6-5", "gpp6-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp6-4", "gpp6-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_single: uart12-bus-pins {
+		samsung,pins = "gpp7-3", "gpp7-2", "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_single: uart13-bus-pins {
+		samsung,pins = "gpp7-7", "gpp7-6", "gpp7-5", "gpp7-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_single: uart14-bus-pins {
+		samsung,pins = "gpp8-3", "gpp8-2", "gpp8-1", "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart18_bus_single: uart18-bus-pins {
+		samsung,pins = "gpp8-7", "gpp8-6", "gpp8-5", "gpp8-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart18_bus_dual: uart18-bus-dual-pins {
+		samsung,pins = "gpp8-4", "gpp8-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart19_bus_single: uart19-bus-pins {
+		samsung,pins = "gpp9-3", "gpp9-2", "gpp9-1", "gpp9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart19_bus_dual: uart19-bus-dual-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart20_bus_single: uart20-bus-pins {
+		samsung,pins = "gpp9-7", "gpp9-6", "gpp9-5", "gpp9-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart20_bus_dual: uart20-bus-dual-pins {
+		samsung,pins = "gpp9-4", "gpp9-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_vts {
+	gpv0: gpv0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	amic_pdm: amic-pdm-pins {
+		samsung,pins = "gpv0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk: dmic-bus-clk-pins {
+		samsung,pins = "gpv0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk_idle: dmic-bus-clk-idle-pins {
+		samsung,pins = "gpv0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk1: dmic-bus-clk1-pins {
+		samsung,pins = "gpv0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk1_idle: dmic-bus-clk1-idle-pins {
+		samsung,pins = "gpv0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk2: dmic-bus-clk2-pins {
+		samsung,pins = "gpv0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk2_idle: dmic-bus-clk2-idle-pins {
+		samsung,pins = "gpv0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm: dmic-pdm-pins {
+		samsung,pins = "gpv0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm_idle: dmic-pdm-idle-pins {
+		samsung,pins = "gpv0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm1_bus: dmic-pdm1-bus-pins {
+		samsung,pins = "gpv0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm1_idle: dmic-pdm1-idle-pins {
+		samsung,pins = "gpv0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm2_bus: dmic-pdm2-bus-pins {
+		samsung,pins = "gpv0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm2_idle: dmic-pdm2-idle-pins {
+		samsung,pins = "gpv0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-r8s.dts b/arch/arm64/boot/dts/exynos/exynos990-r8s.dts
new file mode 100644
index 000000000000..55342db61979
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-r8s.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 FE (r8s/SM-G780F) device tree source
+ *
+ * Copyright (c) 2024, Denzeel Oliva <wachiturroxd150@gmail.com>
+ */
+
+/dts-v1/;
+#include "exynos990.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy S20 FE";
+	compatible = "samsung,r8s", "samsung,exynos990";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@f1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xf1000000 0 (1080 * 2400 * 4)>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ab00000>,
+		      /* Memory hole */
+		      <0x0 0xc1200000 0x0 0x1ee00000>,
+		      /* Memory hole */
+		      <0x0 0xe1900000 0x0 0x1e700000>,
+		      /* Memory hole - last block */
+		      <0x8 0x80000000 0x0 0xc0000000>;
+	};
+
+	/* TODO: Remove this once PMIC is implemented */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: framebuffer@f1000000 {
+			reg = <0 0xf1000000 0 0x13c6800>;
+			no-map;
+		};
+
+		abox_reserved: audio@f7fb0000 {
+			reg = <0 0xf7fb0000 0 0x2a50000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
new file mode 100644
index 000000000000..7b97220cccb7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 Series device tree source
+ *
+ * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@f1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xf1000000 0 (1440 * 3200 * 4)>;
+			width = <1440>;
+			height = <3200>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	/* TODO: Remove this once PMIC is implemented */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: framebuffer@f1000000 {
+			reg = <0 0xf1000000 0 0x1194000>;
+			no-map;
+		};
+
+		abox_reserved: audio@f7fb0000 {
+			reg = <0 0xf7fb0000 0 0x2a50000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1s.dts b/arch/arm64/boot/dts/exynos/exynos990-x1s.dts
new file mode 100644
index 000000000000..1ae881015e0c
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1s.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 5G (x1s/SM-G981B) device tree source
+ *
+ * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990-x1s-common.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Samsung Galaxy S20 5G";
+	compatible = "samsung,x1s", "samsung,exynos990";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ab00000>,
+		      /* Memory hole */
+		      <0x0 0xc1200000 0x0 0x1ee00000>,
+		      /* Memory hole */
+		      <0x0 0xe1900000 0x0 0x1e700000>,
+		      /* Memory hole */
+		      <0x8 0x80000000 0x2 0x7e800000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts b/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts
new file mode 100644
index 000000000000..d3720996ba93
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 (x1slte/SM-G980F) device tree source
+ *
+ * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990-x1s-common.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Samsung Galaxy S20";
+	compatible = "samsung,x1slte", "samsung,exynos990";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ab00000>,
+		      /* Memory hole */
+		      <0x0 0xc1200000 0x0 0x1ee00000>,
+		      /* Memory hole */
+		      <0x0 0xe1900000 0x0 0x1e700000>,
+		      /* Memory hole */
+		      <0x8 0x80000000 0x1 0x7ec00000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990.dtsi b/arch/arm64/boot/dts/exynos/exynos990.dtsi
new file mode 100644
index 000000000000..7179109c49d0
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990.dtsi
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Exynos 990 SoC device tree source
+ *
+ * Copyright (c) 2024, Igor Belwon <igor.belwon@mentallysanemainliners.org>
+ */
+
+#include <dt-bindings/clock/samsung,exynos990.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos990";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_cmgp;
+		pinctrl2 = &pinctrl_hsi1;
+		pinctrl3 = &pinctrl_hsi2;
+		pinctrl4 = &pinctrl_peric0;
+		pinctrl5 = &pinctrl_peric1;
+		pinctrl6 = &pinctrl_vts;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x4>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x5>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@200 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m5";
+			reg = <0x6>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@201 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m5";
+			reg = <0x7>;
+			enable-method = "psci";
+		};
+	};
+
+	oscclk: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	pmu-a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-affinity = <&cpu4>,
+				     <&cpu5>;
+	};
+
+	pmu-mongoose-m5 {
+		compatible = "samsung,mongoose-pmu";
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-affinity = <&cpu6>,
+				     <&cpu7>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "hvc";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos990-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		cmu_peris: clock-controller@10020000 {
+			compatible = "samsung,exynos990-cmu-peris";
+			reg = <0x10020000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIS_BUS>;
+			clock-names = "oscclk", "bus";
+		};
+
+		timer@10040000 {
+			compatible = "samsung,exynos990-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x10040000 0x800>;
+			clocks = <&oscclk>, <&cmu_peris CLK_GOUT_PERIS_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog_cl0: watchdog@10050000 {
+			compatible = "samsung,exynos990-wdt";
+			reg = <0x10050000 0x100>;
+			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_GOUT_PERIS_WDT_CLUSTER0_PCLK>,
+				 <&oscclk>;
+			clock-names = "watchdog",
+				      "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+		};
+
+		watchdog_cl2: watchdog@10060000 {
+			compatible = "samsung,exynos990-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_GOUT_PERIS_WDT_CLUSTER2_PCLK>,
+				 <&oscclk>;
+			clock-names = "watchdog",
+				      "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <2>;
+		};
+
+		gic: interrupt-controller@10101000 {
+			compatible = "arm,gic-400";
+			reg = <0x10101000 0x1000>,
+			      <0x10102000 0x1000>,
+			      <0x10104000 0x2000>,
+			      <0x10106000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			#address-cells = <0>;
+			#size-cells = <1>;
+		};
+
+		cmu_peric0: clock-controller@10400000 {
+			compatible = "samsung,exynos990-cmu-peric0";
+			reg = <0x10400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
+		pinctrl_peric0: pinctrl@10430000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x10430000 0x1000>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_peric1: clock-controller@10700000 {
+			compatible = "samsung,exynos990-cmu-peric1";
+			reg = <0x10700000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
+		pinctrl_peric1: pinctrl@10730000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x10730000 0x1000>;
+			interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_hsi0: clock-controller@10a00000 {
+			compatible = "samsung,exynos990-cmu-hsi0";
+			reg = <0x10a00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USB31DRD>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USBDP_DEBUG>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>;
+			clock-names = "oscclk",
+				      "bus",
+				      "usb31drd",
+				      "usbdp_debug",
+				      "dpgtc";
+		};
+
+		usbdrd_phy: phy@10c00000 {
+			compatible = "samsung,exynos990-usbdrd-phy";
+			reg = <0x10c00000 0x100>;
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL>,
+				 <&oscclk>;
+			clock-names = "phy", "ref";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usbdrd: usb@10e00000 {
+			compatible = "samsung,exynos990-dwusb3",
+				     "samsung,exynos850-dwusb3";
+			ranges = <0x0 0x10e00000 0x10000>;
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_USB31DRD_REF_CLK_40>;
+			clock-names = "bus_early", "ref";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			usbdrd_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy 0>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		pinctrl_hsi1: pinctrl@13040000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x13040000 0x1000>;
+			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2: pinctrl@13c30000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x13c30000 0x1000>;
+			interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_vts: pinctrl@15580000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x15580000 0x1000>;
+		};
+
+		pinctrl_alive: pinctrl@15850000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x15850000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos990-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@15860000 {
+			compatible = "samsung,exynos990-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x15860000 0x10000>;
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmu_system_controller>;
+				offset = <0x3a00>; /* SWRESET */
+				mask = <0x2>; /* SWRESET_TRIGGER */
+				value = <0x2>;
+			};
+		};
+
+		pinctrl_cmgp: pinctrl@15c30000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x15c30000 0x1000>;
+		};
+
+		cmu_top: clock-controller@1a330000 {
+			compatible = "samsung,exynos990-cmu-top";
+			reg = <0x1a330000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>;
+			clock-names = "oscclk";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <26000000>;
+	};
+};
+
+#include "exynos990-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
index bc1815f6ada2..de2c1de51a76 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "exynosautov9.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Samsung ExynosAuto v9 SADK board";
@@ -32,6 +33,31 @@
 		      <0xa 0x00000000 0x2 0x00000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_wakeup &key_volup &key_voldown>;
+
+		key-wakeup {
+			label = "Wakeup";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpg2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpg1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	ufs_0_fixed_vcc_reg: regulator-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "ufs-vcc";
@@ -49,6 +75,31 @@
 	};
 };
 
+&pinctrl_alive {
+	key_wakeup: key-wakeup-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_peric1 {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpg2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpg1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm_tout3>;
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index b228cd7e351e..66628cb32776 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -166,7 +166,8 @@
 		ranges = <0x0 0x0 0x0 0x20000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos850-chipid";
+			compatible = "samsung,exynosautov9-chipid",
+				     "samsung,exynos850-chipid";
 			reg = <0x10000000 0x24>;
 		};
 
@@ -250,6 +251,52 @@
 				      "dout_fsys2_clkcmu_ethernet";
 		};
 
+		cmu_dpum: clock-controller@18c00000 {
+			compatible = "samsung,exynosautov9-cmu-dpum";
+			reg = <0x18c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_DPUM_BUS>;
+			clock-names = "oscclk", "bus";
+		};
+
+		sysmmu_dpum_0: sysmmu@18c80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x18c80000 0x10000>;
+			interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D0_CLK>;
+			clock-names = "sysmmu";
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_dpum_1: sysmmu@18c90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x18c90000 0x10000>;
+			interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D1_CLK>;
+			clock-names = "sysmmu";
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_dpum_2: sysmmu@18ca0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x18ca0000 0x10000>;
+			interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D2_CLK>;
+			clock-names = "sysmmu";
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_dpum_3: sysmmu@18cb0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x18cb0000 0x10000>;
+			interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D3_CLK>;
+			clock-names = "sysmmu";
+			#iommu-cells = <0>;
+		};
+
 		cmu_core: clock-controller@1b030000 {
 			compatible = "samsung,exynosautov9-cmu-core";
 			reg = <0x1b030000 0x8000>;
@@ -309,7 +356,9 @@
 			reg = <0x10450000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynosautov9-wakeup-eint";
+				compatible = "samsung,exynosautov9-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -349,7 +398,8 @@
 		};
 
 		pmu_system_controller: system-controller@10460000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "samsung,exynosautov9-pmu",
+				     "samsung,exynos7-pmu", "syscon";
 			reg = <0x10460000 0x10000>;
 
 			reboot: syscon-reboot {
@@ -392,7 +442,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103000c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1000>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -431,6 +481,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -454,7 +505,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103100c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1004>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -483,7 +534,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103200c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1008>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -522,6 +573,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -545,7 +597,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103300c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x100c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -574,7 +626,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103400c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -613,6 +665,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -636,7 +689,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103500c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1014>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -665,7 +718,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103600c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1018>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -704,6 +757,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -727,7 +781,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103700c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x101c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -756,7 +810,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103800c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1020>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -795,6 +849,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -818,7 +873,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103900c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1024>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -847,7 +902,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103a00c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1028>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -886,6 +941,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -909,7 +965,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103b00c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x102c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -938,7 +994,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109000c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1000>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -977,6 +1033,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -1000,7 +1057,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109100c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1004>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1029,7 +1086,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109200c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1008>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1068,6 +1125,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1091,7 +1149,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109300c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x100c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1120,7 +1178,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109400c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1159,6 +1217,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1182,7 +1241,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109500c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1014>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1211,7 +1270,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109600c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1018>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1250,6 +1309,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1273,7 +1333,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109700c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x101c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1302,7 +1362,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109800c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1020>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1341,6 +1401,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1364,7 +1425,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109900c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1024>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1393,7 +1454,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109a00c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1028>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1430,6 +1491,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1453,7 +1515,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109b00c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x102c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
new file mode 100644
index 000000000000..663e8265cbf5
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
@@ -0,0 +1,1266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb6: gpb6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi0 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph8: gph8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph5: gph5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph6: gph6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2ufs {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_refclk_out_1: ufs-refclk-out-1-pins {
+		samsung,pins = "gph2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_rst_n_1: ufs-rst-n-1-pins {
+		samsung,pins = "gph2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg5: gpg5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* PWM PERIC0 */
+	pwm_tout0: pwm-tout0-pins {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout1: pwm-tout1-pins {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout2: pwm-tout2-pins {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout3: pwm-tout3-pins {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI00 */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart0_bus_dual: uart0-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI01 */
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus_dual: uart1-bus-dual-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI02 */
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI03 */
+	uart3_bus: uart3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI04 */
+	uart4_bus: uart4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI05 */
+	uart5_bus: uart5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI06 */
+	uart6_bus: uart6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI07 */
+	uart7_bus: uart7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI08 */
+	uart8_bus: uart8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00  */
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00_I2C */
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01 */
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01_I2C */
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02 */
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02_I2C */
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03 */
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03_I2C */
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04 */
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04_I2C */
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05 */
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05_I2C */
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06 */
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06_I2C */
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07 */
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07_I2C */
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08 */
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08_I2C */
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI00 */
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI01 */
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI02 */
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI03 */
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI04 */
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI05 */
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI06 */
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI07 */
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI08 */
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC0 */
+	i3c0_bus: i3c0-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c1_bus: i3c1-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c2_bus: i3c2-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c3_bus: i3c3-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* UART PERIC1 USI09 */
+	uart9_bus: uart9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI10 */
+	uart10_bus: uart10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI11 */
+	uart11_bus: uart11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI12 */
+	uart12_bus: uart12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI13 */
+	uart13_bus: uart13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI14 */
+	uart14_bus: uart14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI15 */
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI16 */
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_dual: uart16-bus-dual-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI17 */
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_dual: uart17-bus-dual-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09 */
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09_I2C */
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10 */
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10_I2C */
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11 */
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11_I2C */
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12 */
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12_I2C */
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13 */
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13_I2C */
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14 */
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14_I2C */
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15 */
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15_I2C */
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16 */
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16_I2C */
+	hsi2c33_bus: hsi2c33-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17 */
+	hsi2c34_bus: hsi2c34-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17_I2C */
+	hsi2c35_bus: hsi2c35-bus-pins {
+		samsung,pins = "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI09 */
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI10 */
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI11 */
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI12 */
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI13 */
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI14 */
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI15 */
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs_func: spi15-cs-func-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI16 */
+	spi16_bus: spi16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs: spi16-cs-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs_func: spi16-cs-func-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI17 */
+	spi17_bus: spi17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs: spi17-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs_func: spi17-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC1 */
+	i3c4_bus: i3c4-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c5_bus: i3c5-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c6_bus: i3c6-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c7_bus: i3c7-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
new file mode 100644
index 000000000000..a397f068ed53
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SADK board device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "exynosautov920.dtsi"
+#include "exynos-pinctrl.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Samsung ExynosAutov920 SADK board";
+	compatible = "samsung,exynosautov920-sadk", "samsung,exynosautov920";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_wakeup &key_back>;
+
+		key-wakeup {
+			label = "KEY_WAKEUP";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		key-back {
+			label = "KEY_BACK";
+			linux,code = <KEY_BACK>;
+			gpios = <&gpp6 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x70000000>,
+		      <0x8 0x80000000 0x1 0xfba00000>,
+		      <0xa 0x00000000 0x2 0x00000000>;
+	};
+};
+
+&pinctrl_alive {
+	key_wakeup: key-wakeup-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pinctrl_peric1 {
+	key_back: key-back-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_tout0>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&usi_0 {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&xtcxo {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
new file mode 100644
index 000000000000..0fdf2062930a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
@@ -0,0 +1,1509 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/clock/samsung,exynosautov920.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "samsung,exynosautov920";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_hsi0;
+		pinctrl3 = &pinctrl_hsi1;
+		pinctrl4 = &pinctrl_hsi2;
+		pinctrl5 = &pinctrl_hsi2ufs;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	xtcxo: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl0>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl0>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl0>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl0>;
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl1>;
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl1>;
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl1>;
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl1>;
+		};
+
+		cpu8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl2>;
+		};
+
+		cpu9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl2>;
+		};
+
+		l2_cache_cl0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_cache_cl0>;
+		};
+
+		l2_cache_cl1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_cache_cl1>;
+		};
+
+		l2_cache_cl2: l2-cache2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_cache_cl2>;
+		};
+
+		l3_cache_cl0: l3-cache0 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+			cache-size = <0x200000>;/* 2MB L3 cache for cpu cluster-0 */
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		l3_cache_cl1: l3-cache1 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+			cache-size = <0x200000>;/* 2MB L3 cache for cpu cluster-1 */
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		l3_cache_cl2: l3-cache2 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+			cache-size = <0x100000>;/* 1MB L3 cache for cpu cluster-2 */
+			cache-line-size = <64>;
+			cache-sets = <1365>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynosautov920-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		cmu_misc: clock-controller@10020000 {
+			compatible = "samsung,exynosautov920-cmu-misc";
+			reg = <0x10020000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_MISC_NOC>;
+			clock-names = "oscclk",
+				      "noc";
+		};
+
+		watchdog_cl0: watchdog@10060000 {
+			compatible = "samsung,exynosautov920-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xtcxo>, <&xtcxo>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+		};
+
+		watchdog_cl1: watchdog@10070000 {
+			compatible = "samsung,exynosautov920-wdt";
+			reg = <0x10070000 0x100>;
+			interrupts = <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xtcxo>, <&xtcxo>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>,
+			      <0x10460000 0x140000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spdma0: dma-controller@10180000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10180000 0x1000>;
+			interrupts = <GIC_SPI 918 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		spdma1: dma-controller@10190000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10190000 0x1000>;
+			interrupts = <GIC_SPI 917 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma0: dma-controller@101a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101a0000 0x1000>;
+			interrupts = <GIC_SPI 916 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma1: dma-controller@101b0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101b0000 0x1000>;
+			interrupts = <GIC_SPI 915 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma2: dma-controller@101c0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101c0000 0x1000>;
+			interrupts = <GIC_SPI 914 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma3: dma-controller@101d0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101d0000 0x1000>;
+			interrupts = <GIC_SPI 913 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma4: dma-controller@101e0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101e0000 0x1000>;
+			interrupts = <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		cmu_peric0: clock-controller@10800000 {
+			compatible = "samsung,exynosautov920-cmu-peric0";
+			reg = <0x10800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_PERIC0_NOC>,
+				 <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
+			clock-names = "oscclk",
+				      "noc",
+				      "ip";
+		};
+
+		syscon_peric0: syscon@10820000 {
+			compatible = "samsung,exynosautov920-peric0-sysreg",
+				     "syscon";
+			reg = <0x10820000 0x2000>;
+		};
+
+		pinctrl_peric0: pinctrl@10830000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10830000 0x10000>;
+			interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usi_0: usi@108800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108800c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1000>;
+			samsung,mode = <USI_MODE_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_0: serial@10880000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10880000 0xc0>;
+				interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_0: spi@10880000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10880000 0x30>;
+				interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_bus &spi0_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 1>, <&pdma0 0>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi_1: usi@108a00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108a00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1008>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_1: serial@108a0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x108a0000 0xc0>;
+				interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_1: spi@108a0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x108a0000 0x30>;
+				interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_bus &spi1_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 3>, <&pdma0 2>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi_2: usi@108c00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108c00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_2: serial@108c0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x108c0000 0xc0>;
+				interrupts = <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart2_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_2: spi@108c0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x108c0000 0x30>;
+				interrupts = <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_bus &spi2_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 5>, <&pdma0 4>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_3: usi@108e00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108e00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1018>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_3: serial@108e0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x108e0000 0xc0>;
+				interrupts = <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart3_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_3: spi@108e0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x108e0000 0x30>;
+				interrupts = <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi3_bus &spi3_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 7>, <&pdma0 6>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_4: usi@109000c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_4: serial@10900000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10900000 0xc0>;
+				interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart4_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_4: spi@10900000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10900000 0x30>;
+				interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi4_bus &spi4_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 9>, <&pdma0 8>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_5: usi@109200c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1028>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_5: serial@10920000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10920000 0xc0>;
+				interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart5_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_5: spi@10920000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10920000 0x30>;
+				interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi5_bus &spi5_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 11>, <&pdma0 10>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_6: usi@109400c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1030>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_6: serial@10940000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10940000 0xc0>;
+				interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart6_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_6: spi@10940000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10940000 0x30>;
+				interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi6_bus &spi6_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 13>, <&pdma0 12>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_7: usi@109600c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1038>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_7: serial@10960000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10960000 0xc0>;
+				interrupts = <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart7_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_7: spi@10960000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10960000 0x30>;
+				interrupts = <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi7_bus &spi7_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 15>, <&pdma0 14>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_8: usi@109800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109800c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1040>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_8: serial@10980000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10980000 0xc0>;
+				interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart8_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_8: spi@10980000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10980000 0x30>;
+				interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi8_bus &spi8_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 17>, <&pdma0 16>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+
+		};
+
+		pwm: pwm@109b0000 {
+			compatible = "samsung,exynosautov920-pwm",
+				     "samsung,exynos4210-pwm";
+			reg = <0x109b0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&xtcxo>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		cmu_peric1: clock-controller@10c00000 {
+			compatible = "samsung,exynosautov920-cmu-peric1";
+			reg = <0x10c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_PERIC1_NOC>,
+				 <&cmu_top DOUT_CLKCMU_PERIC1_IP>;
+			clock-names = "oscclk",
+				      "noc",
+				      "ip";
+		};
+
+		syscon_peric1: syscon@10c20000 {
+			compatible = "samsung,exynosautov920-peric1-sysreg",
+				     "syscon";
+			reg = <0x10c20000 0x2000>;
+		};
+
+		pinctrl_peric1: pinctrl@10c30000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10c30000 0x10000>;
+			interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usi_9: usi@10c800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10c800c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_9: serial@10c8000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10c80000 0xc0>;
+				interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart9_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_9: spi@10c80000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10c80000 0x30>;
+				interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi9_bus &spi9_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 1>, <&pdma1 0>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi_10: usi@10ca00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10ca00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1008>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_10: serial@10ca0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10ca0000 0xc0>;
+				interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart10_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_10: spi@10ca0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10ca0000 0x30>;
+				interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi10_bus &spi10_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 3>, <&pdma1 2>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_11: usi@10cc00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10cc00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_11: serial@10cc0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10cc0000 0xc0>;
+				interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart11_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_11: spi@10cc0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10cc0000 0x30>;
+				interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi11_bus &spi11_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 5>, <&pdma1 4>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_12: usi@10ce00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10ce00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1018>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_12: serial@10ce0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10ce0000 0xc0>;
+				interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart12_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_12: spi@10ce0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10ce0000 0x30>;
+				interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi12_bus &spi12_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 7>, <&pdma1 6>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_13: usi@10d000c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d000c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_13: serial@10d00000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d00000 0xc0>;
+				interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart13_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_13: spi@10d00000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d00000 0x30>;
+				interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi13_bus &spi13_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 9>, <&pdma1 8>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_14: usi@10d200c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d200c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1028>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_14: serial@10d20000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d20000 0xc0>;
+				interrupts = <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart14_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_14: spi@10d20000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d20000 0x30>;
+				interrupts = <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi14_bus &spi14_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 11>, <&pdma1 10>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_15: usi@10d400c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d400c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1030>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_15: serial@10d40000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d40000 0xc0>;
+				interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart15_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_15: spi@10d40000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d40000 0x30>;
+				interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi15_bus &spi15_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 13>, <&pdma1 12>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_16: usi@10d600c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d600c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1038>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_16: serial@10d60000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d60000 0xc0>;
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart16_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_16: spi@10d60000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d60000 0x30>;
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi16_bus &spi16_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 15>, <&pdma1 14>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_17: usi@10d800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d800c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1040>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_17: serial@10d80000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d80000 0xc0>;
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart17_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_17: spi@10d80000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d80000 0x30>;
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi17_bus &spi17_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 17>, <&pdma1 16>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		cmu_top: clock-controller@11000000 {
+			compatible = "samsung,exynosautov920-cmu-top";
+			reg = <0x11000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>;
+			clock-names = "oscclk";
+		};
+
+		pinctrl_alive: pinctrl@11850000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x11850000 0x10000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynosautov920-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@11860000 {
+			compatible = "samsung,exynosautov920-pmu",
+				     "samsung,exynos7-pmu","syscon";
+			reg = <0x11860000 0x10000>;
+		};
+
+		cmu_hsi0: clock-controller@16000000 {
+			compatible = "samsung,exynosautov920-cmu-hsi0";
+			reg = <0x16000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_HSI0_NOC>;
+			clock-names = "oscclk",
+				      "noc";
+		};
+
+		pinctrl_hsi0: pinctrl@16040000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16040000 0x10000>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_hsi1: clock-controller@16400000 {
+			compatible = "samsung,exynosautov920-cmu-hsi1";
+			reg = <0x16400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_HSI1_NOC>,
+				 <&cmu_top DOUT_CLKCMU_HSI1_USBDRD>,
+				 <&cmu_top DOUT_CLKCMU_HSI1_MMC_CARD>;
+			clock-names = "oscclk",
+				      "noc",
+				      "usbdrd",
+				      "mmc_card";
+		};
+
+		pinctrl_hsi1: pinctrl@16450000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16450000 0x10000>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_hsi2: clock-controller@16b00000 {
+			compatible = "samsung,exynosautov920-cmu-hsi2";
+			reg = <0x16b00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_NOC>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_NOC_UFS>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_UFS_EMBD>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_ETHERNET>;
+			clock-names = "oscclk",
+				      "noc",
+				      "ufs",
+				      "embd",
+				      "ethernet";
+		};
+
+		pinctrl_hsi2: pinctrl@16c10000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16c10000 0x10000>;
+			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2ufs: pinctrl@16d20000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16d20000 0x10000>;
+			interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ufs_0_phy: phy@16e04000 {
+			compatible = "samsung,exynosautov920-ufs-phy";
+			reg = <0x16e04000 0x4000>;
+			reg-names = "phy-pma";
+			clocks = <&xtcxo>;
+			clock-names = "ref_clk";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pinctrl_aud: pinctrl@1a460000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x1a460000 0x10000>;
+		};
+
+		cmu_cpucl0: clock-controller@1ec00000 {
+			compatible = "samsung,exynosautov920-cmu-cpucl0";
+			reg = <0x1ec00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL0_SWITCH>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL0_CLUSTER>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL0_DBG>;
+			clock-names = "oscclk",
+				      "switch",
+				      "cluster",
+				      "dbg";
+		};
+
+		cmu_cpucl1: clock-controller@1ed00000 {
+			compatible = "samsung,exynosautov920-cmu-cpucl1";
+			reg = <0x1ed00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL1_SWITCH>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL1_CLUSTER>;
+			clock-names = "oscclk",
+				      "switch",
+				      "cluster";
+		};
+
+		cmu_cpucl2: clock-controller@1ee00000 {
+			compatible = "samsung,exynosautov920-cmu-cpucl2";
+			reg = <0x1ee00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL2_SWITCH>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL2_CLUSTER>;
+			clock-names = "oscclk",
+				      "switch",
+				      "cluster";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "exynosautov920-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/google/Makefile b/arch/arm64/boot/dts/exynos/google/Makefile
new file mode 100644
index 000000000000..7385f82b03c9
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_EXYNOS) += \
+	gs101-oriole.dtb \
+	gs101-raven.dtb
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
new file mode 100644
index 000000000000..8df42bedbc03
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Oriole Device Tree
+ *
+ * Copyright 2021-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "gs101-pixel-common.dtsi"
+
+/ {
+	model = "Oriole";
+	compatible = "google,gs101-oriole", "google,gs101";
+};
+
+&cont_splash_mem {
+	reg = <0x0 0xfac00000 (1080 * 2400 * 4)>;
+	status = "okay";
+};
+
+&framebuffer0 {
+	width = <1080>;
+	height = <2400>;
+	stride = <(1080 * 4)>;
+	format = "a8r8g8b8";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
new file mode 100644
index 000000000000..a675f822acec
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
@@ -0,0 +1,1249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include "gs101-pinctrl.h"
+
+&pinctrl_gpio_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa5: gpa5-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa9: gpa9-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa10: gpa10-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpa2-3", "gpa2-4";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_far_alive {
+	gpa6: gpa6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa7: gpa7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa8: gpa8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa11: gpa11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+};
+
+&pinctrl_gsacore {
+	gps0: gps0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps1: gps1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps2: gps2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_gsactrl {
+	gps3: gps3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie0_clkreq: pcie0-clkreq-pins {
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie0_perst: pcie0-perst-pins {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gph4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gph4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gph4-3", "gph4-4", "gph4-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph3-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	pcie1_clkreq: pcie1-clkreq-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie1_perst: pcie1-perst-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp13: gpp13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp14: gpp14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp15: gpp15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp16: gpp16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp17: gpp17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp18: gpp18-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp19: gpp19-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* USI_PERIC0_UART_DBG */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	disp_te_pri_on: disp-te-pri-on-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_pri_off: disp-te-pri-off-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	disp_te_sec_on: disp-te-sec-on-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_sec_off: disp-te-sec-off-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	sensor_mclk1_out: sensor-mclk1-out-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk1_fn: sensor-mclk1-fn-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_out: sensor-mclk2-out-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_fn: sensor-mclk2-fn-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_out: sensor-mclk3-out-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_fn: sensor-mclk3-fn-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_out: sensor-mclk4-out-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_fn: sensor-mclk4-fn-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_out: sensor-mclk5-out-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_fn: sensor-mclk5-fn-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_out: sensor-mclk6-out-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_fn: sensor-mclk6-fn-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_out: sensor-mclk7-out-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_fn: sensor-mclk7-fn-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_out: sensor-mclk8-out-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_fn: sensor-mclk8-fn-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart14_bus_single: uart14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1",
+			       "gpp18-2", "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>;
+	};
+
+	uart8_bus_single: uart8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2",
+			       "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart7_bus_single: uart7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1",
+			       "gpp14-2", "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart6_bus_single: uart6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1",
+			       "gpp12-2", "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart5_bus_single: uart5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1",
+			       "gpp10-2", "gpp10-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart4_bus_single: uart4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1",
+			       "gpp8-2", "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart3_bus_single: uart3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1",
+			       "gpp6-2", "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart2_bus_single: uart2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1",
+			       "gpp4-2", "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart1_bus_single: uart1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1",
+			       "gpp2-2", "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp20: gpp20-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp21: gpp21-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp22: gpp22-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp23: gpp23-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp24: gpp24-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp25: gpp25-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp26: gpp26-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp27: gpp27-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins  {
+		samsung,pins = "gpp25-0", "gpp25-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart13_bus_single: uart13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1",
+			       "gpp25-2", "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart12_bus_single: uart12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5",
+			       "gpp23-6", "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs2: spi14-cs2-pins {
+		samsung,pins = "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart11_bus_single: uart11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1",
+			       "gpp23-2", "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart10_bus_single: uart10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1",
+			       "gpp21-2", "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart9_bus_single: uart9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5",
+			       "gpp20-6", "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart0_bus_single: uart0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1",
+			       "gpp20-2", "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
new file mode 100644
index 000000000000..b7d276b1e25a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Pinctrl binding constants for GS101
+ *
+ * Copyright 2020-2023 Google LLC
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+
+#define GS101_PIN_PULL_NONE		0
+#define GS101_PIN_PULL_DOWN		1
+#define GS101_PIN_PULL_UP		3
+
+/* Pin function in power down mode */
+#define GS101_PIN_PDN_OUT0		0
+#define GS101_PIN_PDN_OUT1		1
+#define GS101_PIN_PDN_INPUT		2
+#define GS101_PIN_PDN_PREV		3
+
+/* GS101 drive strengths */
+#define GS101_PIN_DRV_2_5_MA		0
+#define GS101_PIN_DRV_5_MA		1
+#define GS101_PIN_DRV_7_5_MA		2
+#define GS101_PIN_DRV_10_MA		3
+
+#define GS101_PIN_FUNC_INPUT		0
+#define GS101_PIN_FUNC_OUTPUT		1
+#define GS101_PIN_FUNC_2		2
+#define GS101_PIN_FUNC_3		3
+#define GS101_PIN_FUNC_EINT		0xf
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__ */
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
new file mode 100644
index 000000000000..84ff3e047d3b
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree nodes common for all GS101-based Pixel
+ *
+ * Copyright 2021-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/usb/pd.h>
+#include "gs101-pinctrl.h"
+#include "gs101.dtsi"
+
+/ {
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		/* Bootloader expects bootargs specified otherwise it crashes */
+		bootargs = "";
+		stdout-path = &serial_0;
+
+		/* Use display framebuffer as setup by bootloader */
+		framebuffer0: framebuffer-0 {
+			compatible = "simple-framebuffer";
+			memory-region = <&cont_splash_mem>;
+			/* format properties to be added by actual board */
+			status = "disabled";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			label = "KEY_VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-vol-up {
+			label = "KEY_VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "KEY_POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	reboot-mode {
+		compatible = "nvmem-reboot-mode";
+		nvmem-cells = <&nvmem_reboot_mode>;
+		nvmem-cell-names = "reboot-mode";
+		mode-bootloader = <0x800000fc>;
+		mode-charge = <0x8000000a>;
+		mode-dm-verity-device-corrupted = <0x80000050>;
+		mode-fastboot = <0x800000fa>;
+		mode-reboot-ab-update = <0x80000052>;
+		mode-recovery = <0x800000ff>;
+		mode-rescue = <0x800000f9>;
+		mode-shutdown-thermal = <0x80000051>;
+		mode-shutdown-thermal-battery = <0x80000051>;
+	};
+
+	/* TODO: Remove this once PMIC is implemented  */
+	reg_placeholder: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "placeholder_reg";
+	};
+
+	/* TODO: Remove this once S2MPG11 slave PMIC is implemented  */
+	ufs_0_fixed_vcc_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "ufs-vcc";
+		gpio = <&gpp0 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		cont_splash_mem: splash@fac00000 {
+			/* size to be updated by actual board */
+			reg = <0x0 0xfac00000 0x0>;
+			no-map;
+			status = "disabled";
+		};
+	};
+};
+
+&acpm_ipc {
+	pmic {
+		compatible = "samsung,s2mpg10-pmic";
+		interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		system-power-controller;
+		wakeup-source;
+
+		regulators {
+		};
+	};
+};
+
+&ext_24_5m {
+	clock-frequency = <24576000>;
+};
+
+&ext_200m {
+	clock-frequency = <200000000>;
+};
+
+&hsi2c_8 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&hsi2c_12 {
+	status = "okay";
+	/* TODO: add the devices once drivers exist */
+
+	usb-typec@25 {
+		compatible = "maxim,max77759-tcpci", "maxim,max33359";
+		reg = <0x25>;
+		interrupts-extended = <&gpa8 2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&typec_int>;
+		pinctrl-names = "default";
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			self-powered;
+			try-power-role = "sink";
+			op-sink-microwatt = <2600000>;
+			slow-charger-loop;
+			/*
+			 * max77759 operating in reverse boost mode (0xA) can
+			 * source up to 1.5A while extboost can only do ~1A.
+			 * Since extboost is the primary path, advertise 900mA.
+			 */
+			source-pdos = <PDO_FIXED(5000, 900,
+						 (PDO_FIXED_SUSPEND
+						  | PDO_FIXED_USB_COMM
+						  | PDO_FIXED_DATA_SWAP
+						  | PDO_FIXED_DUAL_ROLE))>;
+			sink-pdos = <PDO_FIXED(5000, 3000,
+					       (PDO_FIXED_DATA_SWAP
+						| PDO_FIXED_USB_COMM
+						| PDO_FIXED_HIGHER_CAP
+						| PDO_FIXED_DUAL_ROLE))
+				     PDO_FIXED(9000, 2200, 0)
+				     PDO_PPS_APDO(5000, 11000, 3000)>;
+			sink-vdos = <VDO_IDH(1, 1, IDH_PTYPE_PERIPH, 0,
+					     IDH_PTYPE_DFP_HOST, 2, 0x18d1)
+				     VDO_CERT(0x0)
+				     VDO_PRODUCT(0x4ee1, 0x0)
+				     VDO_UFP(UFP_VDO_VER1_2,
+					     (DEV_USB2_CAPABLE
+					      | DEV_USB3_CAPABLE),
+					     UFP_RECEPTACLE, 0,
+					     AMA_VCONN_NOT_REQ, 0,
+					     UFP_ALTMODE_NOT_SUPP,
+					     UFP_USB32_GEN1)
+				     /* padding */ 0
+				     VDO_DFP(DFP_VDO_VER1_1,
+					     (HOST_USB2_CAPABLE
+					      | HOST_USB3_CAPABLE),
+					     DFP_RECEPTACLE, 0)>;
+			sink-vdos-v1 = <VDO_IDH(1, 1, IDH_PTYPE_PERIPH, 0,
+						0, 0, 0x18d1)
+					VDO_CERT(0x0)
+					VDO_PRODUCT(0x4ee1, 0x0)>;
+			/*
+			 * Until bootloader is updated to set those two when
+			 * console is enabled, we disable PD here.
+			 */
+			pd-disable;
+			typec-power-opmode = "default";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc0_orien_sw: endpoint {
+						remote-endpoint = <&usbdrd31_phy_orien_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc0_role_sw: endpoint {
+						remote-endpoint = <&usbdrd31_dwc3_role_switch>;
+					};
+				};
+			};
+		};
+	};
+
+	pmic@66 {
+		compatible = "maxim,max77759";
+		reg = <0x66>;
+
+		pinctrl-0 = <&if_pmic_int>;
+		pinctrl-names = "default";
+		interrupts-extended = <&gpa8 3 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		gpio {
+			compatible = "maxim,max77759-gpio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			/*
+			 * "Human-readable name [SIGNAL_LABEL]" where the
+			 * latter comes from the schematic
+			 */
+			gpio-line-names = "OTG boost [OTG_BOOST_EN]",
+					  "max20339 IRQ [MW_OVP_INT_L]";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		nvmem-0 {
+			compatible = "maxim,max77759-nvmem";
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				nvmem_reboot_mode: reboot-mode@0 {
+					reg = <0x0 0x4>;
+				};
+
+				boot-reason@4 {
+					reg = <0x4 0x4>;
+				};
+
+				shutdown-user-flag@8 {
+					reg = <0x8 0x1>;
+				};
+
+				rsoc@a {
+					reg = <0xa 0x2>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl_far_alive {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa7-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	typec_int: typec-int-pins {
+		samsung,pins = "gpa8-2";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	if_pmic_int: if-pmic-int-pins {
+		samsung,pins = "gpa8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_gpio_alive {
+	pmic_int: pmic-int-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&ufs_0 {
+	status = "okay";
+	vcc-supply = <&ufs_0_fixed_vcc_reg>;
+};
+
+&ufs_0_phy {
+	status = "okay";
+};
+
+&usbdrd31 {
+	vdd10-supply = <&reg_placeholder>;
+	vdd33-supply = <&reg_placeholder>;
+	status = "okay";
+};
+
+&usbdrd31_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	maximum-speed = "super-speed-plus";
+	status = "okay";
+
+	port {
+		usbdrd31_dwc3_role_switch: endpoint {
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+&usbdrd31_phy {
+	orientation-switch;
+	/* TODO: Update these once PMIC is implemented */
+	pll-supply = <&reg_placeholder>;
+	dvdd-usb20-supply = <&reg_placeholder>;
+	vddh-usb20-supply = <&reg_placeholder>;
+	vdd33-usb20-supply = <&reg_placeholder>;
+	vdda-usbdp-supply = <&reg_placeholder>;
+	vddh-usbdp-supply = <&reg_placeholder>;
+	status = "okay";
+
+	port {
+		usbdrd31_phy_orien_switch: endpoint {
+			remote-endpoint = <&usbc0_orien_sw>;
+		};
+	};
+};
+
+&usi_uart {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&usi8 {
+	samsung,mode = <USI_MODE_I2C>;
+	status = "okay";
+};
+
+&usi12 {
+	samsung,mode = <USI_MODE_I2C>;
+	status = "okay";
+};
+
+&watchdog_cl0 {
+	timeout-sec = <30>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-raven.dts b/arch/arm64/boot/dts/exynos/google/gs101-raven.dts
new file mode 100644
index 000000000000..1e7e6b34b864
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-raven.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Raven Device Tree
+ *
+ * Copyright 2021-2023 Google LLC
+ * Copyright 2023-2025 Linaro Ltd
+ */
+
+/dts-v1/;
+
+#include "gs101-pixel-common.dtsi"
+
+/ {
+	model = "Raven";
+	compatible = "google,gs101-raven", "google,gs101";
+};
+
+&cont_splash_mem {
+	reg = <0x0 0xfac00000 (1440 * 3120 * 4)>;
+	status = "okay";
+};
+
+&framebuffer0 {
+	width = <1440>;
+	height = <3120>;
+	stride = <(1440 * 4)>;
+	format = "a8r8g8b8";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
new file mode 100644
index 000000000000..31c99526470d
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -0,0 +1,1526 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include <dt-bindings/clock/google,gs101.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "google,gs101";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_gpio_alive;
+		pinctrl1 = &pinctrl_far_alive;
+		pinctrl2 = &pinctrl_gsacore;
+		pinctrl3 = &pinctrl_gsactrl;
+		pinctrl4 = &pinctrl_peric0;
+		pinctrl5 = &pinctrl_peric1;
+		pinctrl6 = &pinctrl_hsi1;
+		pinctrl7 = &pinctrl_hsi2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0000>;
+			enable-method = "psci";
+			cpu-idle-states = <&ananke_cpu_sleep>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0100>;
+			enable-method = "psci";
+			cpu-idle-states = <&ananke_cpu_sleep>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0200>;
+			enable-method = "psci";
+			cpu-idle-states = <&ananke_cpu_sleep>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0300>;
+			enable-method = "psci";
+			cpu-idle-states = <&ananke_cpu_sleep>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0400>;
+			enable-method = "psci";
+			cpu-idle-states = <&enyo_cpu_sleep>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0500>;
+			enable-method = "psci";
+			cpu-idle-states = <&enyo_cpu_sleep>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0600>;
+			enable-method = "psci";
+			cpu-idle-states = <&hera_cpu_sleep>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0700>;
+			enable-method = "psci";
+			cpu-idle-states = <&hera_cpu_sleep>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			ananke_cpu_sleep: cpu-ananke-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <70>;
+				exit-latency-us = <160>;
+				min-residency-us = <2000>;
+			};
+
+			enyo_cpu_sleep: cpu-enyo-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <150>;
+				exit-latency-us = <190>;
+				min-residency-us = <2500>;
+			};
+
+			hera_cpu_sleep: cpu-hera-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <235>;
+				exit-latency-us = <220>;
+				min-residency-us = <3500>;
+			};
+		};
+	};
+
+	/* ect node is required to be present by bootloader */
+	ect {
+	};
+
+	ext_24_5m: clock-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	ext_200m: clock-2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ext-200m";
+	};
+
+	firmware {
+		acpm_ipc: power-management {
+			compatible = "google,gs101-acpm-ipc";
+			mboxes = <&ap2apm_mailbox>;
+			shmem = <&apm_sram>;
+		};
+	};
+
+	pmu-0 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-1 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	pmu-2 {
+		compatible = "arm,cortex-x1-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
+	};
+
+	pmu-3 {
+		compatible = "arm,dsu-pmu";
+		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+		       <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+		interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		gsa_reserved_protected: gsa@90200000 {
+			reg = <0x0 0x90200000 0x400000>;
+			no-map;
+		};
+
+		tpu_fw_reserved: tpu-fw@93000000 {
+			reg = <0x0 0x93000000 0x1000000>;
+			no-map;
+		};
+
+		aoc_reserve: aoc@94000000 {
+			reg = <0x0 0x94000000 0x03000000>;
+			no-map;
+		};
+
+		abl_reserved: abl@f8800000 {
+			reg = <0x0 0xf8800000 0x02000000>;
+			no-map;
+		};
+
+		dss_log_reserved: dss-log-reserved@fd3f0000 {
+			reg = <0x0 0xfd3f0000 0x0000e000>;
+			no-map;
+		};
+
+		debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 {
+			reg = <0x0 0xfd3fe000 0x00001000>;
+			no-map;
+		};
+
+		bldr_log_reserved: bldr-log-reserved@fd800000 {
+			reg = <0x0 0xfd800000 0x00100000>;
+			no-map;
+		};
+
+		bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 {
+			reg = <0x0 0xfd900000 0x00002000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		cmu_misc: clock-controller@10010000 {
+			compatible = "google,gs101-cmu-misc";
+			reg = <0x10010000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&cmu_top CLK_DOUT_CMU_MISC_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_MISC_SSS>;
+			clock-names = "bus", "sss";
+		};
+
+		timer@10050000 {
+			compatible = "google,gs101-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x10050000 0x800>;
+			clocks = <&ext_24_5m>, <&cmu_misc CLK_GOUT_MISC_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		watchdog_cl0: watchdog@10060000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10060000 0x100>;
+			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_PCLK>,
+				 <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+			status = "disabled";
+		};
+
+		watchdog_cl1: watchdog@10070000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10070000 0x100>;
+			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_PCLK>,
+				 <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <0>;
+			#interrupt-cells = <4>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>, /* GICD */
+			      <0x10440000 0x100000>;/* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		cmu_peric0: clock-controller@10800000 {
+			compatible = "google,gs101-cmu-peric0";
+			reg = <0x10800000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
+		sysreg_peric0: syscon@10820000 {
+			compatible = "google,gs101-peric0-sysreg", "syscon";
+			reg = <0x10820000 0x10000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_SYSREG_PERIC0_PCLK>;
+		};
+
+		pinctrl_peric0: pinctrl@10840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10840000 0x00001000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK>;
+			clock-names = "pclk";
+			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		usi1: usi@109000c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1000>;
+			status = "disabled";
+
+			hsi2c_1: i2c@10900000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10900000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c1_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_1: serial@10900000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10900000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart1_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_1: spi@10900000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10900000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi1_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi2: usi@109100c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1004>;
+			status = "disabled";
+
+			hsi2c_2: i2c@10910000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10910000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c2_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_2: serial@10910000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10910000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart2_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_2: spi@10910000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10910000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi2_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi3: usi@109200c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1008>;
+			status = "disabled";
+
+			hsi2c_3: i2c@10920000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10920000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c3_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_3: serial@10920000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10920000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart3_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_3: spi@10920000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10920000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi3_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi4: usi@109300c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x100c>;
+			status = "disabled";
+
+			hsi2c_4: i2c@10930000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10930000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c4_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_4: serial@10930000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10930000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart4_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_4: spi@10930000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10930000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi4_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5: usi@109400c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1010>;
+			status = "disabled";
+
+			hsi2c_5: i2c@10940000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10940000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_5: serial@10940000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10940000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart5_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_5: spi@10940000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10940000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi6: usi@109500c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1014>;
+			status = "disabled";
+
+			hsi2c_6: i2c@10950000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10950000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c6_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_6: serial@10950000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10950000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart6_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_6: spi@10950000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10950000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi6_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi7: usi@109600c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1018>;
+			status = "disabled";
+
+			hsi2c_7: i2c@10960000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10960000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c7_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_7: serial@10960000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10960000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart7_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_7: spi@10960000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10960000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi7_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi8: usi@109700c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x101c>;
+			status = "disabled";
+
+			hsi2c_8: i2c@10970000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10970000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c8_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_8: serial@10970000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10970000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart8_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_8: spi@10970000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10970000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi8_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_uart: usi@10a000c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10a000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1020>;
+			samsung,mode = <USI_MODE_UART>;
+			status = "disabled";
+
+			serial_0: serial@10a00000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10a00000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart0_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi14: usi@10a200c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10a200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1028>;
+			status = "disabled";
+
+			hsi2c_14: i2c@10a20000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10a20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c14_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_14: serial@10a20000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10a20000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart14_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_14: spi@10a20000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10a20000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi14_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		cmu_peric1: clock-controller@10c00000 {
+			compatible = "google,gs101-cmu-peric1";
+			reg = <0x10c00000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
+		sysreg_peric1: syscon@10c20000 {
+			compatible = "google,gs101-peric1-sysreg", "syscon";
+			reg = <0x10c20000 0x10000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SYSREG_PERIC1_PCLK>;
+		};
+
+		pinctrl_peric1: pinctrl@10c40000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10c40000 0x00001000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_GPIO_PERIC1_PCLK>;
+			clock-names = "pclk";
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		usi0: usi@10d100c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1000>;
+			status = "disabled";
+
+			hsi2c_0: i2c@10d10000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d10000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c0_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_usi0: serial@10d10000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d10000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart0_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_0: spi@10d10000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d10000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi0_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi9: usi@10d200c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1004>;
+			status = "disabled";
+
+			hsi2c_9: i2c@10d20000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c9_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_9: serial@10d20000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d20000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart9_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_9: spi@10d20000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d20000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi9_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi10: usi@10d300c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1008>;
+			status = "disabled";
+
+			hsi2c_10: i2c@10d30000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d30000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c10_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_10: serial@10d30000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d30000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart10_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_10: spi@10d30000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d30000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi10_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi11: usi@10d400c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x100c>;
+			status = "disabled";
+
+			hsi2c_11: i2c@10d40000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d40000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c11_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_11: serial@10d40000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d40000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart11_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_11: spi@10d40000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d40000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi11_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi12: usi@10d500c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1010>;
+			status = "disabled";
+
+			hsi2c_12: i2c@10d50000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d50000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c12_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_12: serial@10d50000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d50000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart12_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_12: spi@10d50000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d50000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi12_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi13: usi@10d600c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1014>;
+			status = "disabled";
+
+			hsi2c_13: i2c@10d60000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d60000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c13_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_13: serial@10d60000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d60000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart13_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_13: spi@10d60000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d60000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi13_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		cmu_hsi0: clock-controller@11000000 {
+			compatible = "google,gs101-cmu-hsi0";
+			reg = <0x11000000 0x4000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USB31DRD>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USBDPDBG>;
+			clock-names = "oscclk", "bus", "dpgtc", "usb31drd",
+				      "usbdpdbg";
+		};
+
+		usbdrd31_phy: phy@11100000 {
+			compatible = "google,gs101-usb31drd-phy";
+			reg = <0x11100000 0x0200>,
+			      <0x110f0000 0x0800>,
+			      <0x110e0000 0x2800>;
+			reg-names = "phy", "pcs", "pma";
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB20_PHY_REFCLK_26>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_ACLK>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_PCLK>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_SCL_APB_PCLK>;
+			clock-names = "phy", "ref", "ctrl_aclk", "ctrl_pclk", "scl_pclk";
+			#phy-cells = <1>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		usbdrd31: usb@11110000 {
+			compatible = "google,gs101-dwusb3";
+			ranges = <0x0 0x11110000 0x10000>;
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_SUSPEND_CLK_26>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_ACLK>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_PCLK>;
+			clock-names = "bus_early", "susp_clk", "link_aclk", "link_pclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			usbdrd31_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_REF_CLK_40>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
+				phys = <&usbdrd31_phy 0>, <&usbdrd31_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,has-lpm-erratum;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				status = "disabled";
+			};
+		};
+
+		pinctrl_hsi1: pinctrl@11840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x11840000 0x00001000>;
+			/* TODO: update once support for this CMU exists */
+			clocks = <0>;
+			clock-names = "pclk";
+			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		cmu_hsi2: clock-controller@14400000 {
+			compatible = "google,gs101-cmu-hsi2";
+			reg = <0x14400000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_PCIE>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_UFS_EMBD>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_MMC_CARD>;
+			clock-names = "oscclk", "bus", "pcie", "ufs", "mmc";
+		};
+
+		sysreg_hsi2: syscon@14420000 {
+			compatible = "google,gs101-hsi2-sysreg", "syscon";
+			reg = <0x14420000 0x10000>;
+			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;
+		};
+
+		pinctrl_hsi2: pinctrl@14440000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x14440000 0x00001000>;
+			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_GPIO_HSI2_PCLK>;
+			clock-names = "pclk";
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		ufs_0: ufs@14700000 {
+			compatible = "google,gs101-ufs";
+			reg = <0x14700000 0x200>,
+			      <0x14701100 0x200>,
+			      <0x14780000 0xa000>,
+			      <0x14600000 0x100>;
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_ACLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_CLK_UNIPRO>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_FMP_CLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_ACLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_PCLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;
+			clock-names = "core_clk", "sclk_unipro_main", "fmp",
+				      "aclk", "pclk", "sysreg";
+			dma-coherent;
+			freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>;
+			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+			pinctrl-names = "default";
+			phys = <&ufs_0_phy>;
+			phy-names = "ufs-phy";
+			samsung,sysreg = <&sysreg_hsi2 0x710>;
+			status = "disabled";
+		};
+
+		ufs_0_phy: phy@14704000 {
+			compatible = "google,gs101-ufs-phy";
+			reg = <0x14704000 0x3000>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks = <&ext_24_5m>;
+			clock-names = "ref_clk";
+			status = "disabled";
+		};
+
+		cmu_apm: clock-controller@17400000 {
+			compatible = "google,gs101-cmu-apm";
+			reg = <0x17400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+
+		sysreg_apm: syscon@174204e0 {
+			compatible = "google,gs101-apm-sysreg", "syscon";
+			reg = <0x174204e0 0x1000>;
+		};
+
+		pmu_system_controller: system-controller@17460000 {
+			compatible = "google,gs101-pmu", "syscon";
+			reg = <0x17460000 0x10000>;
+			google,pmu-intr-gen-syscon = <&pmu_intr_gen>;
+
+			poweroff: syscon-poweroff {
+				compatible = "syscon-poweroff";
+				offset = <0x3e9c>; /* PAD_CTRL_PWR_HOLD */
+				mask = <0x00000100>;
+				value = <0x0>;
+			};
+
+			reboot: syscon-reboot {
+				compatible = "google,gs101-reboot";
+			};
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x0810>; /* EXYNOS_PMU_SYSIP_DAT0 */
+				mode-bootloader = <0xfc>;
+				mode-charge = <0x0a>;
+				mode-dm-verity-device-corrupted = <0x50>;
+				mode-fastboot = <0xfa>;
+				mode-reboot-ab-update = <0x52>;
+				mode-recovery = <0xff>;
+				mode-rescue = <0xf9>;
+				mode-shutdown-thermal = <0x51>;
+				mode-shutdown-thermal-battery = <0x51>;
+			};
+		};
+
+		pmu_intr_gen: syscon@17470000 {
+			compatible = "google,gs101-pmu-intr-gen", "syscon";
+			reg = <0x17470000 0x10000>;
+		};
+
+		pinctrl_gpio_alive: pinctrl@174d0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174d0000 0x00001000>;
+			clocks = <&cmu_apm CLK_GOUT_APM_APBIF_GPIO_ALIVE_PCLK>;
+			clock-names = "pclk";
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_far_alive: pinctrl@174e0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174e0000 0x00001000>;
+			clocks = <&cmu_apm CLK_GOUT_APM_APBIF_GPIO_FAR_ALIVE_PCLK>;
+			clock-names = "pclk";
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		ap2apm_mailbox: mailbox@17610000 {
+			compatible = "google,gs101-mbox";
+			reg = <0x17610000 0x1000>;
+			clocks = <&cmu_apm CLK_GOUT_APM_MAILBOX_APM_AP_PCLK>;
+			clock-names = "pclk";
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <0>;
+		};
+
+		pinctrl_gsactrl: pinctrl@17940000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17940000 0x00001000>;
+			/* TODO: update once support for this CMU exists */
+			clocks = <0>;
+			clock-names = "pclk";
+		};
+
+		pinctrl_gsacore: pinctrl@17a80000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17a80000 0x00001000>;
+			/* TODO: update once support for this CMU exists */
+			clocks = <0>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
+		cmu_top: clock-controller@1e080000 {
+			compatible = "google,gs101-cmu-top";
+			reg = <0x1e080000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+	};
+
+	apm_sram: sram@2039000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x2039000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x2039000 0x40000>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts =
+		   <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
+	};
+};
+
+#include "gs101-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 300049037eb0..525ef180481d 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -5,10 +5,13 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-tqmls1012al-mbls1012al.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
@@ -20,23 +23,41 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb
+DTC_FLAGS_fsl-ls1088a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
+DTC_FLAGS_fsl-ls1088a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
+DTC_FLAGS_fsl-ls1088a-ten64 := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
+DTC_FLAGS_fsl-ls1088a-tqmls1088a-mbls10xxa := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-tqmls1088a-mbls10xxa.dtb
+DTC_FLAGS_fsl-ls2080a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
+DTC_FLAGS_fsl-ls2080a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+DTC_FLAGS_fsl-ls2081a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
+DTC_FLAGS_fsl-ls2080a-simu := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+DTC_FLAGS_fsl-ls2088a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+DTC_FLAGS_fsl-ls2088a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+DTC_FLAGS_fsl-lx2160a-bluebox3 := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3.dtb
+DTC_FLAGS_fsl-lx2160a-bluebox3-rev-a := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3-rev-a.dtb
+DTC_FLAGS_fsl-lx2160a-clearfog-cx := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb
+DTC_FLAGS_fsl-lx2160a-honeycomb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
+DTC_FLAGS_fsl-lx2160a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
+DTC_FLAGS_fsl-lx2160a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
+DTC_FLAGS_fsl-lx2162a-clearfog := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-clearfog.dtb
+DTC_FLAGS_fsl-lx2162a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
 
 fsl-ls1028a-qds-13bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-13bb.dtbo
@@ -53,7 +74,44 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
 
+DTC_FLAGS_fsl-lx2160a-tqmlx2160a-mblx2160a := -Wno-interrupt_map
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
+
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-aster.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-eval-v3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-iris-v2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-iris.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
+
+imx8dxl-evk-pcie-ep-dtbs += imx8dxl-evk.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk-pcie-ep.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdp-mba8xx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdps-mb-smarc-2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
@@ -61,8 +119,14 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-emtop-baseboard.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb
+
+imx8mm-evk-pcie-ep-dtbs += imx8mm-evk.dtb imx-pcie0-ep.dtbo
+imx8mm-evkb-pcie-ep-dtbs += imx8mm-evkb.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk-pcie-ep.dtb imx8mm-evkb-pcie-ep.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-iot-gateway.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-osm-s.dtb
@@ -70,6 +134,19 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phg.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb
+
+imx8mm-phyboard-polis-peb-av-10-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phyboard-polis-peb-av-10.dtbo
+imx8mm-phyboard-polis-peb-eval-01-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phyboard-polis-peb-eval-01.dtbo
+imx8mm-phycore-no-eth-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-no-eth.dtbo
+imx8mm-phycore-no-spiflash-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-no-spiflash.dtbo
+imx8mm-phycore-rpmsg-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-rpmsg.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-av-10.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-eval-01.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phycore-no-eth.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phycore-no-spiflash.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phycore-rpmsg.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-prt8mm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
@@ -77,16 +154,20 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw75xx-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb
-dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7905-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-ivy.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-ivy.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb
 
 imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtbo
@@ -95,43 +176,122 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-dimonoff-gateway-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-rve-gateway.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
 
 imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33-dtbs += imx8mn-tqma8mqnl-mba8mx.dtb imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtbo
+imx8mn-tqma8mqnl-mba8mx-usbotg-dtbs += imx8mn-tqma8mqnl-mba8mx.dtb imx8mn-tqma8mqnl-mba8mx-usbotg.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx-usbotg.dtb
 
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-adpismarc.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-helios.dtb
+imx8mp-aristainetos3-helios-lvds-dtbs += imx8mp-aristainetos3-helios.dtb imx8mp-aristainetos3-helios-lvds.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-helios-lvds.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-proton2s.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-cubox-m.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-som-a-bmb-08.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-drc02.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-picoitx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-edm-g-wb.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-mate.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pulse.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-ripple.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-iota2-lumpy.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-bl-osm-s.dtb
+
+imx8mp-kontron-dl-dtbs += imx8mp-kontron-bl-osm-s.dtb imx8mp-kontron-dl.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-dl.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-smarc-eval-carrier.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-libra-rdk-fpsc.dtb
+imx8mp-libra-rdk-fpsc-lvds-dtbs += imx8mp-libra-rdk-fpsc.dtb imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-libra-rdk-fpsc-lvds.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-enc-carrier-board.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-smarc-universal-board.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
+imx8mp-phyboard-pollux-rdk-no-eth-dtbs += imx8mp-phyboard-pollux-rdk.dtb imx8mp-phycore-no-eth.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-no-eth.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-basic.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-bd500.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-tian-g07017.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-toradex-smarc-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314.dtb
+
+imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10-dtbs += imx8mp-tx8p-ml81-moduline-display-106.dtb \
+	imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtbo
+imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17-dtbs += imx8mp-tx8p-ml81-moduline-display-106.dtb \
+	imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-ultra-mach-sbc.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw73xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
-dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw75xx-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw82xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-ivy.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-ivy.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
 
-imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo
-dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb
+imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtbo
+imx8mp-evk-lvds0-imx-lvds-hdmi-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds0-imx-lvds-hdmi.dtbo
+imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtbo
+imx8mp-evk-lvds1-imx-lvds-hdmi-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds1-imx-lvds-hdmi.dtbo
+imx8mp-evk-mx8-dlvds-lcd1-dtbs += imx8mp-evk.dtb imx8mp-evk-mx8-dlvds-lcd1.dtbo
+imx8mp-evk-pcie-ep-dtbs += imx8mp-evk.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds0-imx-lvds-hdmi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds1-imx-lvds-hdmi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-mx8-dlvds-lcd1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-pcie-ep.dtb
+
+imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo
+imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo
+imx8mp-tqma8mpql-mba8mp-ras314-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo
+imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo
+imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-imx219.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
+imx8mq-evk-pcie1-ep-dtbs += imx8mq-evk.dtb imx-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk-pcie1-ep.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
@@ -151,20 +311,82 @@ imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33-dtbs += imx8mq-tqma8mq-mba8mx.dtb imx8mq-
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval-v1.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-ixora-v1.1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval-v1.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
+
+imx8qm-mek-ov5640-csi0-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi0.dtb
+imx8qm-mek-ov5640-csi1-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi1.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi1.dtb
+imx8qm-mek-ov5640-dual-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo imx8qm-mek-ov5640-csi1.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-dual.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-aster.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+
+imx8qxp-mek-pcie-ep-dtbs += imx8qxp-mek.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek-pcie-ep.dtb
+
+imx8qxp-mek-ov5640-csi-dtbs := imx8qxp-mek.dtb imx8qxp-mek-ov5640-csi.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qxp-mek-ov5640-csi.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqps-mb-smarc-2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8ulp-9x9-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
+
+imx93-9x9-qsb-i3c-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-i3c.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-i3c.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
+
+imx93-phyboard-nash-peb-wlbt-07-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-peb-wlbt-07.dtbo
+imx93-phyboard-segin-peb-eval-01-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-eval-01.dtbo
+imx93-phyboard-segin-peb-wlbt-05-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-wlbt-05.dtbo
+imx93-phycore-rpmsg-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-segin.dtb imx93-phycore-rpmsg.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-peb-wlbt-07.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-eval-01.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-wlbt-05.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-rpmsg.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb
+
+imx95-15x15-evk-pcie0-ep-dtbs = imx95-15x15-evk.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk-pcie0-ep.dtb
+imx95-19x19-evk-pcie0-ep-dtbs += imx95-19x19-evk.dtb imx-pcie0-ep.dtbo
+imx95-19x19-evk-pcie1-ep-dtbs += imx95-19x19-evk.dtb imx-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-pcie0-ep.dtb imx95-19x19-evk-pcie1-ep.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-libra-rdk-fpsc.dtb
+
+imx8mm-kontron-dl-dtbs			:= imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
+imx8mm-kontron-bl-lte-dtbs		:= imx8mm-kontron-bl.dtb imx8mm-kontron-bl-lte.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-dl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-lte.dtb
 
 imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
 imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
@@ -192,6 +414,15 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-imx219.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb
 
+imx8mm-phygate-tauri-l-rs232-rs232-dtbs		:= imx8mm-phygate-tauri-l.dtb imx8mm-phygate-tauri-l-rs232-rs232.dtbo
+imx8mm-phygate-tauri-l-rs232-cts-rts-dtbs	:= imx8mm-phygate-tauri-l.dtb imx8mm-phygate-tauri-l-rs232-rts-cts.dtbo
+imx8mm-phygate-tauri-l-rs232-rs485-dtbs		:= imx8mm-phygate-tauri-l.dtb imx8mm-phygate-tauri-l-rs232-rs485.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l-rs232-rs232.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l-rs232-cts-rts.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l-rs232-rs485.dtb
+
 dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
 dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb
+dtb-$(CONFIG_ARCH_S32) += s32g399a-rdb3.dtb
 dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
index 2517528f684f..75081ce3e9a6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -20,6 +20,12 @@
 		clock-frequency = <25000000>;
 	};
 
+	sc16is7xx_clk: clock-sc16is7xx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "1P8V";
@@ -69,12 +75,6 @@
 		clocks = <&sc16is7xx_clk>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-
-		sc16is7xx_clk: clock-sc16is7xx {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index bbdf989058ff..ce59b94d8c22 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -87,7 +87,7 @@
 	flash@2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "en25s64", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		spi-cpol;
 		spi-cpha;
 		reg = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts
new file mode 100644
index 000000000000..07026b067320
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+#include "fsl-ls1012a-tqmls1012al-mbls1012al.dts"
+
+&esdhc0 {
+	vqmmc-supply = <&reg_1v8>;
+	/delete-property/ no-mmc;
+	/delete-property/ sd-uhs-sdr12;
+	/delete-property/ sd-uhs-sdr25;
+	/delete-property/ sd-uhs-sdr50;
+	/delete-property/ sd-uhs-sdr104;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	no-sd;
+	voltage-ranges = <1800 1800>;
+	non-removable;
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts
new file mode 100644
index 000000000000..e46cc1a07f0c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "fsl-ls1012a-tqmls1012al.dtsi"
+
+/ {
+	model = "TQ-Systems TQMLS1012AL on MBLS1012AL";
+	compatible = "tq,ls1012a-tqmls1012al-mbls1012al", "tq,ls1012a-tqmls1012al", "fsl,ls1012a";
+	chassis-type = "embedded";
+
+	aliases {
+		/* use MAC from U-Boot environment */
+		/* TODO: PFE */
+		ethernet2 = &swport0;
+		ethernet3 = &swport1;
+		ethernet4 = &swport2;
+		ethernet5 = &swport3;
+		serial0 = &duart0;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = &duart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-1 {
+			label = "S2";
+			linux,code = <BTN_0>;
+			gpios = <&gpio_exp_3p3v 13 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-2 {
+			label = "X15";
+			linux,code = <BTN_1>;
+			gpios = <&gpio_exp_1p8v 5 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-3 {
+			label = "X16";
+			linux,code = <BTN_2>;
+			gpios = <&gpio_exp_1p8v 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio_exp_3p3v 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_exp_3p3v 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 64 MiB */
+			size = <0 0x04000000>;
+			/*  512 - 128 MiB, our minimum RAM config will be 512 MiB */
+			alloc-ranges = <0 0x80000000 0 0x98000000>;
+			linux,cma-default;
+		};
+	};
+
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_1p5v_pcie: regulator-1p5v-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_PCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_1p8v 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v5>;
+	};
+
+	reg_1p5v_wlan: regulator-1p5v-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_WLAN";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_1p8v 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v5>;
+	};
+
+	reg_1v8: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_pcie: regulator-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_PCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_3p3v 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_3v3_wlan: regulator-3v3-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_WLAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_3p3v 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&esdhc0 {
+	vmmc-supply = <&reg_3v3>;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&i2c0 {
+	gpio_exp_3p3v: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "", "", "GPIO_3V3_3", "",
+				  "", "", "", "",
+				  "", "GPIO_3V3_1", "GPIO_3V3_2", "",
+				  "", "", "", "";
+
+		wlan-disable-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "WLAN_DISABLE#";
+		};
+
+		pcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PCIE_RST#";
+		};
+
+		wlan-rst-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "WLAN_RST#";
+		};
+
+		pcie-dis-hog {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PCIE_DIS#";
+		};
+
+		pcie-wake-hog {
+			gpio-hog;
+			gpios = <12 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "PCIE_WAKE#";
+		};
+	};
+
+	lm75_48: temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+		vs-supply = <&reg_3v3>;
+	};
+
+	switch@5f {
+		compatible = "microchip,ksz9897";
+		reg = <0x5f>;
+		reset-gpios = <&gpio_exp_3p3v 7 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			swport0: port@0 {
+				reg = <0>;
+				label = "swp0";
+				phy-mode = "internal";
+			};
+
+			swport1: port@1 {
+				reg = <1>;
+				label = "swp1";
+				phy-mode = "internal";
+			};
+
+			swport2: port@2 {
+				reg = <2>;
+				label = "swp2";
+				phy-mode = "internal";
+			};
+
+			swport3: port@3 {
+				reg = <3>;
+				label = "swp3";
+				phy-mode = "internal";
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				/* TODO: PFE */
+				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <1500>;
+				tx-internal-delay-ps = <1500>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	gpio_exp_1p8v: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_1v8>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "PCIE_CLK_PD#", "PMIC_INT#", "ETH_SW_INT#", "",
+				  "", "", "", "",
+				  "", "GPIO_3V3_1", "GPIO_3V3_2", "",
+				  "", "", "", "";
+
+		/* do not change PCIE_CLK_PD */
+		pcie-clk-pd-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PCIE_CLK_PD#";
+		};
+
+		pmic-int-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "PMIC_INT#";
+		};
+
+		eth-sw-int-hog {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "ETH_SW_INT#";
+		};
+
+		eth-link-pwrdwn-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "ETH_LINK_PWRDWN#";
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+/* TODO: PFE */
+
+&sata {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio_exp_3p3v 6 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio_exp_3p3v 6 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi
new file mode 100644
index 000000000000..7c5a3dee91b9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	compatible = "tq,ls1012a-tqmls1012al", "fsl,ls1012a";
+
+	memory@80000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 512 MiB */
+		reg = <0x00000000 0x80000000 0 0x20000000>;
+	};
+
+	reg_vcc_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	jc42_19: temperature-sensor@19 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x19>;
+	};
+
+	m24c64_50: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+
+	m24c02_51: eeprom@51 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+
+	rtc1: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <39000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		vcc-supply = <&reg_vcc_1v8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index a863022529ac..fc3e138077b8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -74,26 +74,27 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
-			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
-			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
-			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	gic: interrupt-controller@1400000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
 		      <0x0 0x1402000 0 0x2000>, /* GICC */
 		      <0x0 0x1404000 0 0x2000>, /* GICH */
 		      <0x0 0x1406000 0 0x2000>; /* GICV */
-		interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	reboot {
@@ -156,15 +157,14 @@
 			status = "disabled";
 		};
 
-		esdhc0: esdhc@1560000 {
+		esdhc0: mmc@1560000 {
 			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			bus-width = <4>;
 			status = "disabled";
 		};
@@ -175,15 +175,14 @@
 			big-endian;
 		};
 
-		esdhc1: esdhc@1580000 {
+		esdhc1: mmc@1580000 {
 			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1580000 0x0 0x10000>;
-			interrupts = <0 65 0x4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			broken-cd;
 			bus-width = <4>;
 			status = "disabled";
@@ -290,7 +289,7 @@
 		dcfg: dcfg@1ee0000 {
 			compatible = "fsl,ls1012a-dcfg",
 				     "syscon";
-			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
 			big-endian;
 		};
 
@@ -305,70 +304,72 @@
 		tmu: tmu@1f00000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
-			fsl,tmu-calibration = <0x00000000 0x00000025
-					       0x00000001 0x0000002c
-					       0x00000002 0x00000032
-					       0x00000003 0x00000039
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000046
-					       0x00000006 0x0000004c
-					       0x00000007 0x00000053
-					       0x00000008 0x00000059
-					       0x00000009 0x0000005f
-					       0x0000000a 0x00000066
-					       0x0000000b 0x0000006c
-
-					       0x00010000 0x00000026
-					       0x00010001 0x0000002d
-					       0x00010002 0x00000035
-					       0x00010003 0x0000003d
-					       0x00010004 0x00000045
-					       0x00010005 0x0000004d
-					       0x00010006 0x00000055
-					       0x00010007 0x0000005d
-					       0x00010008 0x00000065
-					       0x00010009 0x0000006d
-
-					       0x00020000 0x00000026
-					       0x00020001 0x00000030
-					       0x00020002 0x0000003a
-					       0x00020003 0x00000044
-					       0x00020004 0x0000004e
-					       0x00020005 0x00000059
-					       0x00020006 0x00000063
-
-					       0x00030000 0x00000014
-					       0x00030001 0x00000021
-					       0x00030002 0x0000002e
-					       0x00030003 0x0000003a
-					       0x00030004 0x00000047
-					       0x00030005 0x00000053
-					       0x00030006 0x00000060>;
-			big-endian;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000025>,
+					<0x00000001 0x0000002c>,
+					<0x00000002 0x00000032>,
+					<0x00000003 0x00000039>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000046>,
+					<0x00000006 0x0000004c>,
+					<0x00000007 0x00000053>,
+					<0x00000008 0x00000059>,
+					<0x00000009 0x0000005f>,
+					<0x0000000a 0x00000066>,
+					<0x0000000b 0x0000006c>,
+
+					<0x00010000 0x00000026>,
+					<0x00010001 0x0000002d>,
+					<0x00010002 0x00000035>,
+					<0x00010003 0x0000003d>,
+					<0x00010004 0x00000045>,
+					<0x00010005 0x0000004d>,
+					<0x00010006 0x00000055>,
+					<0x00010007 0x0000005d>,
+					<0x00010008 0x00000065>,
+					<0x00010009 0x0000006d>,
+
+					<0x00020000 0x00000026>,
+					<0x00020001 0x00000030>,
+					<0x00020002 0x0000003a>,
+					<0x00020003 0x00000044>,
+					<0x00020004 0x0000004e>,
+					<0x00020005 0x00000059>,
+					<0x00020006 0x00000063>,
+
+					<0x00030000 0x00000014>,
+					<0x00030001 0x00000021>,
+					<0x00030002 0x0000002e>,
+					<0x00030003 0x0000003a>,
+					<0x00030004 0x00000047>,
+					<0x00030005 0x00000053>,
+					<0x00030006 0x00000060>;
 			#thermal-sensor-cells = <1>;
 		};
 
 		i2c0: i2c@2180000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
-			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
+			scl-gpios = <&gpio0 2 0>;
 			status = "disabled";
 		};
 
 		i2c1: i2c@2190000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
-			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
+			scl-gpios = <&gpio0 13 0>;
 			status = "disabled";
 		};
 
@@ -377,7 +378,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
@@ -389,7 +390,7 @@
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;
-			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
@@ -398,16 +399,16 @@
 		duart1: serial@21c0600 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0600 0x0 0x100>;
-			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -415,9 +416,9 @@
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -428,7 +429,7 @@
 			compatible = "fsl,ls1012a-wdt",
 				     "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-			interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
 			big-endian;
 		};
@@ -437,7 +438,7 @@
 			#sound-dai-cells = <0>;
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0x2b50000 0x0 0x10000>;
-			interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -447,9 +448,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 47>,
-			       <&edma0 1 46>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 46>,
+			       <&edma0 1 47>;
 			status = "disabled";
 		};
 
@@ -457,7 +458,7 @@
 			#sound-dai-cells = <0>;
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0x2b60000 0x0 0x10000>;
-			interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -467,9 +468,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 45>,
-			       <&edma0 1 44>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 44>,
+			       <&edma0 1 45>;
 			status = "disabled";
 		};
 
@@ -479,8 +480,8 @@
 			reg = <0x0 0x2c00000 0x0 0x10000>,
 			      <0x0 0x2c10000 0x0 0x10000>,
 			      <0x0 0x2c20000 0x0 0x10000>;
-			interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "edma-tx", "edma-err";
 			dma-channels = <32>;
 			big-endian;
@@ -494,7 +495,7 @@
 		usb0: usb@2f00000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x2f00000 0x0 0x10000>;
-			interrupts = <0 60 0x4>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
@@ -506,7 +507,7 @@
 			reg = <0x0 0x3200000 0x0 0x10000>,
 				<0x0 0x20140520 0x0 0x4>;
 			reg-names = "ahci", "sata-ecc";
-			interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			dma-coherent;
@@ -516,7 +517,7 @@
 		usb1: usb@8600000 {
 			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 			reg = <0x0 0x8600000 0x0 0x1000>;
-			interrupts = <0 139 0x4>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			phy_type = "ulpi";
 		};
@@ -525,7 +526,7 @@
 			compatible = "fsl,ls1012a-msi";
 			reg = <0x0 0x1572000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pcie1: pcie@3400000 {
@@ -533,13 +534,12 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 118 0x4>, /* controller interrupt */
-				     <0 117 0x4>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			num-viewport = <2>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
@@ -550,16 +550,17 @@
 					<0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
 			status = "disabled";
 		};
 
-		rcpm: power-controller@1ee2140 {
+		rcpm: wakeup-controller@1ee2140 {
 			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x4>;
 			#fsl,rcpm-wakeup-cells = <1>;
 		};
 
-		ftm_alarm0: timer@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1012a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x20000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
index ed4e69e87e30..1d53b529af88 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
-#include "fsl-ls1028a-kontron-sl28.dts"
+#include "fsl-ls1028a-kontron-sl28-var3.dts"
 
 / {
 	model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier";
@@ -19,13 +19,18 @@
 
 	pwm-fan {
 		compatible = "pwm-fan";
-		cooling-min-state = <0>;
-		cooling-max-state = <3>;
 		#cooling-cells = <2>;
 		pwms = <&sl28cpld_pwm0 0 4000000>;
 		cooling-levels = <1 128 192 255>;
 	};
 
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	sound {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -107,6 +112,11 @@
 		clock-names = "mclk";
 		assigned-clocks = <&mclk>;
 		assigned-clock-rates = <1250000>;
+		AVDD-supply = <&reg_3p3v>;
+		CPVDD-supply = <&reg_3p3v>;
+		DBVDD-supply = <&reg_3p3v>;
+		DCVDD-supply = <&reg_3p3v>;
+		MICVDD-supply = <&reg_3p3v>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3.dts
new file mode 100644
index 000000000000..08851ca407a8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 3 which has one ethernet ports.
+ *
+ * Copyright (C) 2024 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (Single PHY)";
+	compatible = "kontron,sl28-var3", "kontron,sl28", "fsl,ls1028a";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index ecd2c1ea177f..757a34ba7da3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -201,6 +201,37 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			/* Atmel AT24C512C-XHDB: 64 KB EEPROM */
+			eeprom@50 {
+				compatible = "atmel,24c512";
+				reg = <0x50>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			/* AT24C04C 512-byte DDR4 SPD EEPROM */
+			/* Documentation says 0x51, but must be even and i2cdetect says 0x52 */
+			eeprom@52 {
+				compatible = "atmel,24c04";
+				reg = <0x52>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			/* Atmel AT24C02C-XHMB: 256-byte EEPROM */
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+
 		i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index eefe3577d94e..7d172d7e5737 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -112,13 +112,6 @@
 		};
 	};
 
-	reboot {
-		compatible = "syscon-reboot";
-		regmap = <&rst>;
-		offset = <0>;
-		mask = <0x02>;
-	};
-
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
@@ -150,12 +143,13 @@
 		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */
 		};
 	};
 
 	thermal-zones {
-		ddr-controller {
+		ddr-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -175,7 +169,7 @@
 			};
 		};
 
-		core-cluster {
+		cluster-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -235,10 +229,16 @@
 			};
 		};
 
-		rst: syscon@1e60000 {
-			compatible = "syscon";
+		syscon@1e60000 {
+			compatible = "fsl,ls1028a-reset", "syscon", "simple-mfd";
 			reg = <0x0 0x1e60000 0x0 0x10000>;
 			little-endian;
+
+			reboot {
+				compatible = "syscon-reboot";
+				offset = <0>;
+				mask = <0x02>;
+			};
 		};
 
 		sfp: efuse@1e80000 {
@@ -381,7 +381,6 @@
 			dmas = <&edma0 0 62>, <&edma0 0 60>;
 			dma-names = "tx", "rx";
 			spi-num-chipselects = <4>;
-			little-endian;
 			status = "disabled";
 		};
 
@@ -397,7 +396,6 @@
 			dmas = <&edma0 0 58>, <&edma0 0 56>;
 			dma-names = "tx", "rx";
 			spi-num-chipselects = <4>;
-			little-endian;
 			status = "disabled";
 		};
 
@@ -413,7 +411,6 @@
 			dmas = <&edma0 0 54>, <&edma0 0 2>;
 			dma-names = "tx", "rx";
 			spi-num-chipselects = <3>;
-			little-endian;
 			status = "disabled";
 		};
 
@@ -662,7 +659,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
@@ -674,7 +671,7 @@
 		};
 
 		pcie_ep1: pcie-ep@3400000 {
-			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+			compatible = "fsl,ls1028a-pcie-ep";
 			reg = <0x00 0x03400000 0x0 0x00100000
 			       0x80 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
@@ -701,7 +698,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
@@ -713,7 +710,7 @@
 		};
 
 		pcie_ep2: pcie-ep@3500000 {
-			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+			compatible = "fsl,ls1028a-pcie-ep";
 			reg = <0x00 0x03500000 0x0 0x00100000
 			       0x88 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
@@ -828,6 +825,7 @@
 				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error", "qdma-queue0",
 				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			#dma-cells = <1>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x10000>;
@@ -859,8 +857,8 @@
 		malidp0: display@f080000 {
 			compatible = "arm,mali-dp500";
 			reg = <0x0 0xf080000 0x0 0x10000>;
-			interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "DE", "SE";
 			clocks = <&dpclk>,
 				 <&clockgen QORIQ_CLK_HWACCEL 2>,
@@ -902,9 +900,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 4>,
-			       <&edma0 1 3>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 3>,
+			       <&edma0 1 4>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -923,9 +921,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 6>,
-			       <&edma0 1 5>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 5>,
+			       <&edma0 1 6>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -944,9 +942,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 8>,
-			       <&edma0 1 7>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 7>,
+			       <&edma0 1 8>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -965,9 +963,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 10>,
-			       <&edma0 1 9>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 9>,
+			       <&edma0 1 10>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -986,9 +984,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 12>,
-			       <&edma0 1 11>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 11>,
+			       <&edma0 1 12>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -1007,9 +1005,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 14>,
-			       <&edma0 1 13>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 13>,
+			       <&edma0 1 14>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -1024,51 +1022,52 @@
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
-			fsl,tmu-calibration = <0x00000000 0x00000024
-					       0x00000001 0x0000002b
-					       0x00000002 0x00000031
-					       0x00000003 0x00000038
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000045
-					       0x00000006 0x0000004c
-					       0x00000007 0x00000053
-					       0x00000008 0x00000059
-					       0x00000009 0x00000060
-					       0x0000000a 0x00000066
-					       0x0000000b 0x0000006d
-
-					       0x00010000 0x0000001c
-					       0x00010001 0x00000024
-					       0x00010002 0x0000002c
-					       0x00010003 0x00000035
-					       0x00010004 0x0000003d
-					       0x00010005 0x00000045
-					       0x00010006 0x0000004d
-					       0x00010007 0x00000055
-					       0x00010008 0x0000005e
-					       0x00010009 0x00000066
-					       0x0001000a 0x0000006e
-
-					       0x00020000 0x00000018
-					       0x00020001 0x00000022
-					       0x00020002 0x0000002d
-					       0x00020003 0x00000038
-					       0x00020004 0x00000043
-					       0x00020005 0x0000004d
-					       0x00020006 0x00000058
-					       0x00020007 0x00000063
-					       0x00020008 0x0000006e
-
-					       0x00030000 0x00000010
-					       0x00030001 0x0000001c
-					       0x00030002 0x00000029
-					       0x00030003 0x00000036
-					       0x00030004 0x00000042
-					       0x00030005 0x0000004f
-					       0x00030006 0x0000005b
-					       0x00030007 0x00000068>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000024>,
+					<0x00000001 0x0000002b>,
+					<0x00000002 0x00000031>,
+					<0x00000003 0x00000038>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000045>,
+					<0x00000006 0x0000004c>,
+					<0x00000007 0x00000053>,
+					<0x00000008 0x00000059>,
+					<0x00000009 0x00000060>,
+					<0x0000000a 0x00000066>,
+					<0x0000000b 0x0000006d>,
+
+					<0x00010000 0x0000001c>,
+					<0x00010001 0x00000024>,
+					<0x00010002 0x0000002c>,
+					<0x00010003 0x00000035>,
+					<0x00010004 0x0000003d>,
+					<0x00010005 0x00000045>,
+					<0x00010006 0x0000004d>,
+					<0x00010007 0x00000055>,
+					<0x00010008 0x0000005e>,
+					<0x00010009 0x00000066>,
+					<0x0001000a 0x0000006e>,
+
+					<0x00020000 0x00000018>,
+					<0x00020001 0x00000022>,
+					<0x00020002 0x0000002d>,
+					<0x00020003 0x00000038>,
+					<0x00020004 0x00000043>,
+					<0x00020005 0x0000004d>,
+					<0x00020006 0x00000058>,
+					<0x00020007 0x00000063>,
+					<0x00020008 0x0000006e>,
+
+					<0x00030000 0x00000010>,
+					<0x00030001 0x0000001c>,
+					<0x00030002 0x00000029>,
+					<0x00030003 0x00000036>,
+					<0x00030004 0x00000042>,
+					<0x00030005 0x0000004f>,
+					<0x00030006 0x0000005b>,
+					<0x00030007 0x00000068>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
@@ -1078,7 +1077,7 @@
 			reg = <0x01 0xf0000000 0x0 0x100000>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			device_type = "pci";
 			bus-range = <0x0 0x0>;
 			dma-coherent;
@@ -1098,21 +1097,25 @@
 				  0xc2000000 0x1 0xf8230000  0x1 0xf8230000  0x0 0x020000
 				  /* BAR4 (PF5) - non-prefetchable memory */
 				  0x82000000 0x1 0xfc000000  0x1 0xfc000000  0x0 0x400000>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 
 			enetc_port0: ethernet@0,0 {
-				compatible = "fsl,enetc";
+				compatible = "pci1957,e100", "fsl,enetc";
 				reg = <0x000000 0 0 0 0>;
 				status = "disabled";
 			};
 
 			enetc_port1: ethernet@0,1 {
-				compatible = "fsl,enetc";
+				compatible = "pci1957,e100", "fsl,enetc";
 				reg = <0x000100 0 0 0 0>;
 				status = "disabled";
 			};
 
 			enetc_port2: ethernet@0,2 {
-				compatible = "fsl,enetc";
+				compatible = "pci1957,e100", "fsl,enetc";
 				reg = <0x000200 0 0 0 0>;
 				phy-mode = "internal";
 				status = "disabled";
@@ -1125,14 +1128,14 @@
 			};
 
 			enetc_mdio_pf3: mdio@0,3 {
-				compatible = "fsl,enetc-mdio";
+				compatible = "pci1957,ee01", "fsl,enetc-mdio";
 				reg = <0x000300 0 0 0 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
 
 			ethernet@0,4 {
-				compatible = "fsl,enetc-ptp";
+				compatible = "pci1957,ee02", "fsl,enetc-ptp";
 				reg = <0x000400 0 0 0 0>;
 				clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
 				little-endian;
@@ -1142,7 +1145,7 @@
 			mscc_felix: ethernet-switch@0,5 {
 				reg = <0x000500 0 0 0 0>;
 				/* IEP INT_B */
-				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <2>;
 				status = "disabled";
 
 				mscc_felix_ports: ports {
@@ -1200,7 +1203,7 @@
 			};
 
 			enetc_port3: ethernet@0,6 {
-				compatible = "fsl,enetc";
+				compatible = "pci1957,e100", "fsl,enetc";
 				reg = <0x000600 0 0 0 0>;
 				phy-mode = "internal";
 				status = "disabled";
@@ -1215,7 +1218,7 @@
 			rcec@1f,0 {
 				reg = <0x00f800 0 0 0 0>;
 				/* IEP INT_A */
-				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <1>;
 			};
 		};
 
@@ -1313,14 +1316,14 @@
 			status = "disabled";
 		};
 
-		rcpm: power-controller@1e34040 {
+		rcpm: wakeup-controller@1e34040 {
 			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x1c>;
 			#fsl,rcpm-wakeup-cells = <7>;
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,ls1028a-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
@@ -1328,7 +1331,7 @@
 			status = "disabled";
 		};
 
-		ftm_alarm1: timer@2810000 {
+		ftm_alarm1: rtc@2810000 {
 			compatible = "fsl,ls1028a-ftm-alarm";
 			reg = <0x0 0x2810000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
index 5c4d7eef8b61..ca7cd7a33c01 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -29,6 +29,7 @@
 
 	enet1: ethernet@e2000 {
 		pcsphy-handle = <&pcsphy1>, <&qsgmiib_pcs1>;
+		pcs-handle = <&pcsphy1>, <&qsgmiib_pcs1>;
 		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
@@ -40,11 +41,13 @@
 
 	enet4: ethernet@e8000 {
 		pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs2>;
+		pcs-handle = <&pcsphy4>, <&qsgmiib_pcs2>;
 		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	enet5: ethernet@ea000 {
 		pcsphy-handle = <&pcsphy5>, <&qsgmiib_pcs3>;
+		pcs-handle = <&pcsphy5>, <&qsgmiib_pcs3>;
 		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index dda27ed7aaf2..e850551b16ac 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -64,7 +64,7 @@
 		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
 		big-endian;
@@ -211,7 +211,7 @@
 };
 
 &fpga {
-	mdio-mux-emi1@54 {
+	mdio-mux@54 {
 		compatible = "mdio-mux-mmioreg", "mdio-mux";
 		mdio-parent-bus = <&mdio0>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 26f8540cb101..c4532c809f0a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -71,7 +71,7 @@
 		  0x1 0x0 0x0 0x7e800000 0x00010000
 		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 
-		nor@0,0 {
+		flash@0,0 {
 			compatible = "cfi-flash";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -104,6 +104,12 @@
 		compatible = "n25q128a13", "jedec,spi-nor";  /* 16MB */
 		reg = <0>;
 		spi-max-frequency = <1000000>; /* input clock */
+		/*
+		 * Standard CS timing properties replace the deprecated vendor
+		 * variants below.
+		 */
+		spi-cs-setup-delay-ns = <100>;
+		spi-cs-hold-delay-ns = <100>;
 		fsl,spi-cs-sck-delay = <100>;
 		fsl,spi-sck-cs-delay = <100>;
 	};
@@ -112,6 +118,12 @@
 		compatible = "maxim,ds26522";
 		reg = <2>;
 		spi-max-frequency = <2000000>;
+		/*
+		 * Standard CS timing properties replace the deprecated vendor
+		 * variants below.
+		 */
+		spi-cs-setup-delay-ns = <100>;
+		spi-cs-hold-delay-ns = <50>;
 		fsl,spi-cs-sck-delay = <100>;
 		fsl,spi-sck-cs-delay = <50>;
 	};
@@ -120,6 +132,12 @@
 		compatible = "maxim,ds26522";
 		reg = <3>;
 		spi-max-frequency = <2000000>;
+		/*
+		 * Standard CS timing properties replace the deprecated vendor
+		 * variants below.
+		 */
+		spi-cs-setup-delay-ns = <100>;
+		spi-cs-hold-delay-ns = <50>;
 		fsl,spi-cs-sck-delay = <100>;
 		fsl,spi-sck-cs-delay = <50>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
index 03748a7f657b..e04483fdb908 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
@@ -41,9 +41,21 @@
 	wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 };
 
+&sfp1 {
+	status = "okay";
+};
+
+&sfp1_i2c {
+	status = "okay";
+};
+
 &usb2 {
 	status = "okay";
 };
 
 #include "fsl-ls1043-post.dtsi"
 #include "tqmls104xa-mbls10xxa-fman.dtsi"
+
+&enet6 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
index 12d5f3938e5d..257d90bb9c20 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
@@ -17,11 +17,10 @@
 	qflash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <62500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 229bb4bebe42..73315c517039 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -154,7 +154,7 @@
 	};
 
 	thermal-zones {
-		ddr-controller {
+		ddr-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -174,7 +174,7 @@
 			};
 		};
 
-		serdes {
+		serdes-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -194,7 +194,7 @@
 			};
 		};
 
-		fman {
+		fman-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 2>;
@@ -214,7 +214,7 @@
 			};
 		};
 
-		core-cluster {
+		cluster-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
@@ -245,7 +245,7 @@
 			};
 		};
 
-		sec {
+		sec-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 4>;
@@ -268,19 +268,19 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xf08>, /* Physical Secure PPI */
-			     <1 14 0xf08>, /* Physical Non-Secure PPI */
-			     <1 11 0xf08>, /* Virtual PPI */
-			     <1 10 0xf08>; /* Hypervisor PPI */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		fsl,erratum-a008585;
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 106 0x4>,
-			     <0 107 0x4>,
-			     <0 95 0x4>,
-			     <0 97 0x4>;
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>,
 				     <&cpu1>,
 				     <&cpu2>,
@@ -289,13 +289,14 @@
 
 	gic: interrupt-controller@1400000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
 		      <0x0 0x1402000 0 0x2000>, /* GICC */
 		      <0x0 0x1404000 0 0x2000>, /* GICH */
 		      <0x0 0x1406000 0 0x2000>; /* GICV */
-		interrupts = <1 9 0xf08>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	soc: soc {
@@ -352,7 +353,7 @@
 			#size-cells = <1>;
 			ranges = <0x0 0x00 0x1700000 0x100000>;
 			reg = <0x00 0x1700000 0x0 0x100000>;
-			interrupts = <0 75 0x4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			dma-coherent;
 
 			sec_jr0: jr@10000 {
@@ -360,7 +361,7 @@
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x10000 0x10000>;
-				interrupts = <0 71 0x4>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sec_jr1: jr@20000 {
@@ -368,7 +369,7 @@
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x20000 0x10000>;
-				interrupts = <0 72 0x4>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sec_jr2: jr@30000 {
@@ -376,7 +377,7 @@
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x30000 0x10000>;
-				interrupts = <0 73 0x4>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sec_jr3: jr@40000 {
@@ -384,7 +385,7 @@
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x40000 0x10000>;
-				interrupts = <0 74 0x4>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -405,7 +406,7 @@
 		ifc: memory-controller@1530000 {
 			compatible = "fsl,ifc";
 			reg = <0x0 0x1530000 0x0 0x10000>;
-			interrupts = <0 43 0x4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		qspi: spi@1550000 {
@@ -415,7 +416,7 @@
 			reg = <0x0 0x1550000 0x0 0x10000>,
 				<0x0 0x40000000 0x0 0x4000000>;
 			reg-names = "QuadSPI", "QuadSPI-memory";
-			interrupts = <0 99 0x4>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "qspi_en", "qspi";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>,
@@ -424,69 +425,68 @@
 			status = "disabled";
 		};
 
-		esdhc: esdhc@1560000 {
+		esdhc: mmc@1560000 {
 			compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			bus-width = <4>;
 		};
 
 		ddr: memory-controller@1080000 {
 			compatible = "fsl,qoriq-memory-controller";
 			reg = <0x0 0x1080000 0x0 0x1000>;
-			interrupts = <0 144 0x4>;
-			big-endian;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		tmu: tmu@1f00000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
-			fsl,tmu-calibration = <0x00000000 0x00000023
-					       0x00000001 0x0000002a
-					       0x00000002 0x00000031
-					       0x00000003 0x00000037
-					       0x00000004 0x0000003e
-					       0x00000005 0x00000044
-					       0x00000006 0x0000004b
-					       0x00000007 0x00000051
-					       0x00000008 0x00000058
-					       0x00000009 0x0000005e
-					       0x0000000a 0x00000065
-					       0x0000000b 0x0000006b
-
-					       0x00010000 0x00000023
-					       0x00010001 0x0000002b
-					       0x00010002 0x00000033
-					       0x00010003 0x0000003b
-					       0x00010004 0x00000043
-					       0x00010005 0x0000004b
-					       0x00010006 0x00000054
-					       0x00010007 0x0000005c
-					       0x00010008 0x00000064
-					       0x00010009 0x0000006c
-
-					       0x00020000 0x00000021
-					       0x00020001 0x0000002c
-					       0x00020002 0x00000036
-					       0x00020003 0x00000040
-					       0x00020004 0x0000004b
-					       0x00020005 0x00000055
-					       0x00020006 0x0000005f
-
-					       0x00030000 0x00000013
-					       0x00030001 0x0000001d
-					       0x00030002 0x00000028
-					       0x00030003 0x00000032
-					       0x00030004 0x0000003d
-					       0x00030005 0x00000047
-					       0x00030006 0x00000052
-					       0x00030007 0x0000005c>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000023>,
+					<0x00000001 0x0000002a>,
+					<0x00000002 0x00000031>,
+					<0x00000003 0x00000037>,
+					<0x00000004 0x0000003e>,
+					<0x00000005 0x00000044>,
+					<0x00000006 0x0000004b>,
+					<0x00000007 0x00000051>,
+					<0x00000008 0x00000058>,
+					<0x00000009 0x0000005e>,
+					<0x0000000a 0x00000065>,
+					<0x0000000b 0x0000006b>,
+
+					<0x00010000 0x00000023>,
+					<0x00010001 0x0000002b>,
+					<0x00010002 0x00000033>,
+					<0x00010003 0x0000003b>,
+					<0x00010004 0x00000043>,
+					<0x00010005 0x0000004b>,
+					<0x00010006 0x00000054>,
+					<0x00010007 0x0000005c>,
+					<0x00010008 0x00000064>,
+					<0x00010009 0x0000006c>,
+
+					<0x00020000 0x00000021>,
+					<0x00020001 0x0000002c>,
+					<0x00020002 0x00000036>,
+					<0x00020003 0x00000040>,
+					<0x00020004 0x0000004b>,
+					<0x00020005 0x00000055>,
+					<0x00020006 0x0000005f>,
+
+					<0x00030000 0x00000013>,
+					<0x00030001 0x0000001d>,
+					<0x00030002 0x00000028>,
+					<0x00030003 0x00000032>,
+					<0x00030004 0x0000003d>,
+					<0x00030005 0x00000047>,
+					<0x00030006 0x00000052>,
+					<0x00030007 0x0000005c>;
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -504,11 +504,11 @@
 			memory-region = <&bman_fbpr>;
 		};
 
-		bportals: bman-portals@508000000 {
+		bportals: bman-portals-bus@508000000 {
 			ranges = <0x0 0x5 0x08000000 0x8000000>;
 		};
 
-		qportals: qman-portals@500000000 {
+		qportals: qman-portals-bus@500000000 {
 			ranges = <0x0 0x5 0x00000000 0x8000000>;
 		};
 
@@ -517,7 +517,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <0 64 0x4>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
@@ -531,8 +531,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
-			interrupts = <0 56 0x4>;
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			dmas = <&edma0 1 38>,
@@ -546,11 +546,14 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
-			interrupts = <0 57 0x4>;
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 36>,
+			       <&edma0 1 37>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -559,11 +562,14 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
-			interrupts = <0 58 0x4>;
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 34>,
+			       <&edma0 1 35>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -572,18 +578,21 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21b0000 0x0 0x10000>;
-			interrupts = <0 59 0x4>;
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 40>,
+			       <&edma0 1 41>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;
-			interrupts = <0 54 0x4>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -591,7 +600,7 @@
 		duart1: serial@21c0600 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0600 0x0 0x100>;
-			interrupts = <0 54 0x4>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -599,7 +608,7 @@
 		duart2: serial@21d0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21d0500 0x0 0x100>;
-			interrupts = <0 55 0x4>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -607,7 +616,7 @@
 		duart3: serial@21d0600 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21d0600 0x0 0x100>;
-			interrupts = <0 55 0x4>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -615,7 +624,7 @@
 		gpio1: gpio@2300000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 66 0x4>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -625,7 +634,7 @@
 		gpio2: gpio@2310000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 67 0x4>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -635,7 +644,7 @@
 		gpio3: gpio@2320000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <0 68 0x4>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -645,14 +654,14 @@
 		gpio4: gpio@2330000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <0 134 0x4>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
 
-		uqe: uqe@2400000 {
+		uqe: uqe-bus@2400000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,qe", "simple-bus";
@@ -666,7 +675,6 @@
 			qeic: qeic@80 {
 				compatible = "fsl,qe-ic";
 				reg = <0x80 0x80>;
-				#address-cells = <0>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
@@ -674,16 +682,12 @@
 			};
 
 			si1: si@700 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "fsl,ls1043-qe-si",
 						"fsl,t1040-qe-si";
 				reg = <0x700 0x80>;
 			};
 
 			siram1: siram@1000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
 				compatible = "fsl,ls1043-qe-siram",
 						"fsl,t1040-qe-siram";
 				reg = <0x1000 0x800>;
@@ -720,69 +724,86 @@
 		lpuart0: serial@2950000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2950000 0x0 0x1000>;
-			interrupts = <0 48 0x4>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 32>,
+			       <&edma0 1 33>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		lpuart1: serial@2960000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2960000 0x0 0x1000>;
-			interrupts = <0 49 0x4>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 30>,
+			       <&edma0 1 31>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		lpuart2: serial@2970000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2970000 0x0 0x1000>;
-			interrupts = <0 50 0x4>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 28>,
+			       <&edma0 1 29>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		lpuart3: serial@2980000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2980000 0x0 0x1000>;
-			interrupts = <0 51 0x4>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 26>,
+			       <&edma0 1 27>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		lpuart4: serial@2990000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2990000 0x0 0x1000>;
-			interrupts = <0 52 0x4>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 24>,
+			       <&edma0 1 25>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		lpuart5: serial@29a0000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x29a0000 0x0 0x1000>;
-			interrupts = <0 53 0x4>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 22>,
+			       <&edma0 1 23>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		wdog0: watchdog@2ad0000 {
 			compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-			interrupts = <0 83 0x4>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
-			clock-names = "wdog";
 			big-endian;
 		};
 
@@ -792,8 +813,8 @@
 			reg = <0x0 0x2c00000 0x0 0x10000>,
 			      <0x0 0x2c10000 0x0 0x10000>,
 			      <0x0 0x2c20000 0x0 0x10000>;
-			interrupts = <0 103 0x4>,
-				     <0 103 0x4>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "edma-tx", "edma-err";
 			dma-channels = <32>;
 			big-endian;
@@ -804,7 +825,7 @@
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
 
-		aux_bus: aux_bus {
+		aux_bus: bus {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			compatible = "simple-bus";
@@ -814,7 +835,7 @@
 			usb0: usb@2f00000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x2f00000 0x0 0x10000>;
-				interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -826,7 +847,7 @@
 			usb1: usb@3000000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x3000000 0x0 0x10000>;
-				interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -838,7 +859,7 @@
 			usb2: usb@3100000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x3100000 0x0 0x10000>;
-				interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -852,7 +873,7 @@
 				reg = <0x0 0x3200000 0x0 0x10000>,
 					<0x0 0x20140520 0x0 0x4>;
 				reg-names = "ahci", "sata-ecc";
-				interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 						    QORIQ_CLK_PLL_DIV(1)>;
 				dma-coherent;
@@ -863,21 +884,21 @@
 			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1571000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 116 0x4>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi2: msi-controller2@1572000 {
 			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1572000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 126 0x4>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi3: msi-controller3@1573000 {
 			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1573000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 160 0x4>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pcie1: pcie@3400000 {
@@ -885,8 +906,8 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -912,8 +933,8 @@
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -939,8 +960,8 @@
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 162 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -962,7 +983,7 @@
 		};
 
 		qdma: dma-controller@8380000 {
-			compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma";
+			compatible = "fsl,ls1043a-qdma", "fsl,ls1021a-qdma";
 			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
 			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
 			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
@@ -973,6 +994,7 @@
 				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error", "qdma-queue0",
 				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			#dma-cells = <1>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x10000>;
@@ -982,13 +1004,13 @@
 			big-endian;
 		};
 
-		rcpm: power-controller@1ee2140 {
+		rcpm: wakeup-controller@1ee2140 {
 			compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x4>;
 			#fsl,rcpm-wakeup-cells = <1>;
 		};
 
-		ftm_alarm0: timer@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1043a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x20000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
index 4e3345093943..15ff7c569d28 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
@@ -24,6 +24,7 @@
 	/* these aliases provide the FMan ports mapping */
 	enet0: ethernet@e0000 {
 		pcsphy-handle = <&qsgmiib_pcs3>;
+		pcs-handle = <&qsgmiib_pcs3>;
 		pcs-handle-names = "qsgmii";
 	};
 
@@ -38,11 +39,13 @@
 
 	enet4: ethernet@e8000 {
 		pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
+		pcs-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
 		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	enet5: ethernet@ea000 {
 		pcsphy-handle = <&pcsphy5>, <&pcsphy5>;
+		pcs-handle = <&pcsphy5>, <&pcsphy5>;
 		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
@@ -51,6 +54,7 @@
 
 	enet7: ethernet@f2000 {
 		pcsphy-handle = <&pcsphy7>, <&qsgmiib_pcs2>, <&pcsphy7>;
+		pcs-handle = <&pcsphy7>, <&qsgmiib_pcs2>, <&pcsphy7>;
 		pcs-handle-names = "sgmii", "qsgmii", "xfi";
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index 3b0ed9305f2b..736722b58e77 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -69,7 +69,7 @@
 	flash@2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "en25s64", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		spi-cpol;
 		spi-cpha;
 		reg = <2>;
@@ -151,7 +151,7 @@
 		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
 		big-endian;
@@ -237,7 +237,7 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	mdio-mux-emi1 {
+	mdio-mux@54 {
 		compatible = "mdio-mux-mmioreg", "mdio-mux";
 		mdio-parent-bus = <&mdio0>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
index 37834ae3deac..43261cda3fcf 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
@@ -44,6 +44,22 @@
 	wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 };
 
+&sfp1 {
+	status = "okay";
+};
+
+&sfp2 {
+	status = "okay";
+};
+
+&sfp1_i2c {
+	status = "okay";
+};
+
+&sfp2_i2c {
+	status = "okay";
+};
+
 &usb2 {
 	status = "okay";
 };
@@ -51,6 +67,10 @@
 #include "fsl-ls1046-post.dtsi"
 #include "tqmls104xa-mbls10xxa-fman.dtsi"
 
+&enet6 {
+	status = "okay";
+};
+
 &enet7 {
-	status = "disabled";
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
index 4a8f8bc688f5..fa543db99def 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
@@ -17,11 +17,10 @@
 	qflash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <62500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
 
 		partitions {
 			compatible = "fixed-partitions";
@@ -38,5 +37,6 @@
 		spi-max-frequency = <62500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 50f68ca5a9af..770d91ef0310 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -122,7 +122,7 @@
 	};
 
 	thermal-zones {
-		ddr-controller {
+		ddr-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -142,7 +142,7 @@
 			};
 		};
 
-		serdes {
+		serdes-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -162,7 +162,7 @@
 			};
 		};
 
-		fman {
+		fman-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 2>;
@@ -182,7 +182,7 @@
 			};
 		};
 
-		core-cluster {
+		cluster-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
@@ -213,7 +213,7 @@
 			};
 		};
 
-		sec {
+		sec-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 4>;
@@ -260,6 +260,7 @@
 
 	gic: interrupt-controller@1400000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x1410000 0 0x10000>, /* GICD */
@@ -282,7 +283,6 @@
 			compatible = "fsl,qoriq-memory-controller";
 			reg = <0x0 0x1080000 0x0 0x1000>;
 			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			big-endian;
 		};
 
 		ifc: memory-controller@1530000 {
@@ -308,14 +308,13 @@
 			status = "disabled";
 		};
 
-		esdhc: esdhc@1560000 {
+		esdhc: mmc@1560000 {
 			compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			bus-width = <4>;
 		};
 
@@ -409,11 +408,11 @@
 
 		};
 
-		qportals: qman-portals@500000000 {
+		qportals: qman-portals-bus@500000000 {
 			ranges = <0x0 0x5 0x00000000 0x8000000>;
 		};
 
-		bportals: bman-portals@508000000 {
+		bportals: bman-portals-bus@508000000 {
 			ranges = <0x0 0x5 0x08000000 0x8000000>;
 		};
 
@@ -441,51 +440,50 @@
 		tmu: tmu@1f00000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000023
-				0x00000001 0x00000029
-				0x00000002 0x0000002f
-				0x00000003 0x00000036
-				0x00000004 0x0000003c
-				0x00000005 0x00000042
-				0x00000006 0x00000049
-				0x00000007 0x0000004f
-				0x00000008 0x00000055
-				0x00000009 0x0000005c
-				0x0000000a 0x00000062
-				0x0000000b 0x00000068
+				<0x00000000 0x00000023>,
+				<0x00000001 0x00000029>,
+				<0x00000002 0x0000002f>,
+				<0x00000003 0x00000036>,
+				<0x00000004 0x0000003c>,
+				<0x00000005 0x00000042>,
+				<0x00000006 0x00000049>,
+				<0x00000007 0x0000004f>,
+				<0x00000008 0x00000055>,
+				<0x00000009 0x0000005c>,
+				<0x0000000a 0x00000062>,
+				<0x0000000b 0x00000068>,
 				/* Calibration data group 2 */
-				0x00010000 0x00000022
-				0x00010001 0x0000002a
-				0x00010002 0x00000032
-				0x00010003 0x0000003a
-				0x00010004 0x00000042
-				0x00010005 0x0000004a
-				0x00010006 0x00000052
-				0x00010007 0x0000005a
-				0x00010008 0x00000062
-				0x00010009 0x0000006a
+				<0x00010000 0x00000022>,
+				<0x00010001 0x0000002a>,
+				<0x00010002 0x00000032>,
+				<0x00010003 0x0000003a>,
+				<0x00010004 0x00000042>,
+				<0x00010005 0x0000004a>,
+				<0x00010006 0x00000052>,
+				<0x00010007 0x0000005a>,
+				<0x00010008 0x00000062>,
+				<0x00010009 0x0000006a>,
 				/* Calibration data group 3 */
-				0x00020000 0x00000021
-				0x00020001 0x0000002b
-				0x00020002 0x00000035
-				0x00020003 0x0000003e
-				0x00020004 0x00000048
-				0x00020005 0x00000052
-				0x00020006 0x0000005c
+				<0x00020000 0x00000021>,
+				<0x00020001 0x0000002b>,
+				<0x00020002 0x00000035>,
+				<0x00020003 0x0000003e>,
+				<0x00020004 0x00000048>,
+				<0x00020005 0x00000052>,
+				<0x00020006 0x0000005c>,
 				/* Calibration data group 4 */
-				0x00030000 0x00000011
-				0x00030001 0x0000001a
-				0x00030002 0x00000024
-				0x00030003 0x0000002e
-				0x00030004 0x00000038
-				0x00030005 0x00000042
-				0x00030006 0x0000004c
-				0x00030007 0x00000056>;
-			big-endian;
+				<0x00030000 0x00000011>,
+				<0x00030001 0x0000001a>,
+				<0x00030002 0x00000024>,
+				<0x00030003 0x0000002e>,
+				<0x00030004 0x00000038>,
+				<0x00030005 0x00000042>,
+				<0x00030006 0x0000004c>,
+				<0x00030007 0x00000056>;
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -526,6 +524,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 36>,
+			       <&edma0 1 37>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -538,6 +539,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 34>,
+			       <&edma0 1 35>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -550,6 +554,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 40>,
+			       <&edma0 1 41>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -590,7 +597,7 @@
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -600,7 +607,7 @@
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -610,7 +617,7 @@
 		};
 
 		gpio2: gpio@2320000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -620,7 +627,7 @@
 		};
 
 		gpio3: gpio@2330000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
 			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -636,6 +643,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 32>,
+			       <&edma0 1 33>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -646,6 +656,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 30>,
+			       <&edma0 1 31>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -656,6 +669,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 28>,
+			       <&edma0 1 29>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -666,6 +682,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 26>,
+			       <&edma0 1 27>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -676,6 +695,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 24>,
+			       <&edma0 1 25>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -686,11 +708,14 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 22>,
+			       <&edma0 1 23>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		wdog0: watchdog@2ad0000 {
-			compatible = "fsl,imx21-wdt";
+			compatible = "fsl,ls1046a-wdt", "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -716,7 +741,7 @@
 					    QORIQ_CLK_PLL_DIV(2)>;
 		};
 
-		aux_bus: aux_bus {
+		aux_bus: bus {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			compatible = "simple-bus";
@@ -802,9 +827,9 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -824,7 +849,7 @@
 		};
 
 		pcie_ep1: pcie_ep@3400000 {
-			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+			compatible = "fsl,ls1046a-pcie-ep";
 			reg = <0x00 0x03400000 0x0 0x00100000>,
 			      <0x40 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
@@ -841,9 +866,9 @@
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -863,7 +888,7 @@
 		};
 
 		pcie_ep2: pcie_ep@3500000 {
-			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+			compatible = "fsl,ls1046a-pcie-ep";
 			reg = <0x00 0x03500000 0x0 0x00100000>,
 			      <0x48 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
@@ -880,9 +905,9 @@
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
-				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -902,7 +927,7 @@
 		};
 
 		pcie_ep3: pcie_ep@3600000 {
-			compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
+			compatible = "fsl,ls1046a-pcie-ep";
 			reg = <0x00 0x03600000 0x0 0x00100000>,
 			      <0x50 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
@@ -926,6 +951,7 @@
 				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error", "qdma-queue0",
 				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			#dma-cells = <1>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x10000>;
@@ -935,13 +961,13 @@
 			big-endian;
 		};
 
-		rcpm: power-controller@1ee2140 {
+		rcpm: wakeup-controller@1ee2140 {
 			compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x4>;
 			#fsl,rcpm-wakeup-cells = <1>;
 		};
 
-		ftm_alarm0: timer@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1046a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x20000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index aa52ff73ff9e..d238a8440a81 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -113,7 +113,7 @@
 		  3 0 0x5 0x20000000 0x00010000>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
 		bank-width = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index ee8e932628d1..2df16bfb901c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -170,6 +170,13 @@
 				/* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */
 				interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>;
 			};
+
+			rtc@53 {
+				compatible = "nxp,pcf2131";
+				reg = <0x53>;
+				/* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */
+				interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index d4867d6cf47c..3a11068f2212 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -87,6 +87,22 @@
 		los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <2000>;
 	};
+
+	usb1v2_supply: regulator-usbhub-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhub_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	system3v3_supply: regulator-system-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "system_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 /* XG1 - Upper SFP */
@@ -220,7 +236,7 @@
 		#gpio-cells = <2>;
 		gpio-controller;
 
-		admin_led_lower {
+		admin-led-lower-hog {
 			gpio-hog;
 			gpios = <13 GPIO_ACTIVE_HIGH>;
 			output-low;
@@ -231,6 +247,12 @@
 		compatible = "atmel,at97sc3204t";
 		reg = <0x29>;
 	};
+
+	usbhub: usb-hub@2d {
+		compatible = "microchip,usb5744";
+		reg = <0x2d>;
+	};
+
 };
 
 &i2c2 {
@@ -323,9 +345,9 @@
 				reg = <0x580000 0x40000>;
 			};
 
-			partition@5C0000 {
+			partition@5c0000 {
 				label = "dpc";
-				reg = <0x5C0000 0x40000>;
+				reg = <0x5c0000 0x40000>;
 			};
 
 			partition@600000 {
@@ -378,10 +400,32 @@
 	};
 };
 
+/* LS1088A USB Port 0 - direct to bottom USB-A port */
 &usb0 {
 	status = "okay";
 };
 
+/* LS1088A USB Port 1 - to Microchip USB5744 USB Hub */
 &usb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&usbhub>;
+		vdd-supply = <&system3v3_supply>;
+		vdd2-supply = <&usb1v2_supply>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&usbhub>;
+		vdd-supply = <&system3v3_supply>;
+		vdd2-supply = <&usb1v2_supply>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
index e567918f6afc..181eeab55aa0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
@@ -53,6 +53,14 @@
 	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 };
 
+&sfp1 {
+	status = "okay";
+};
+
+&sfp2 {
+	status = "okay";
+};
+
 &sfp1_i2c {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
index 9a0f21484be9..b8a213df238a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
@@ -17,11 +17,10 @@
 	qflash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <62500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
 
 		partitions {
 			compatible = "fixed-partitions";
@@ -38,5 +37,6 @@
 		spi-max-frequency = <62500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 8f6090a9aef2..9d5726378aa0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -118,7 +118,7 @@
 		      <0x0 0x0c0c0000 0 0x2000>, /* GICC */
 		      <0x0 0x0c0d0000 0 0x1000>, /* GICH */
 		      <0x0 0x0c0e0000 0 0x20000>; /* GICV */
-		interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -126,12 +126,13 @@
 		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0x6020000 0 0x20000>;
 		};
 	};
 
 	thermal-zones {
-		core-cluster {
+		cluster-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -166,7 +167,7 @@
 			};
 		};
 
-		soc {
+		soc-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -183,10 +184,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
-			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
-			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
-			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
 	};
 
 	pmu {
@@ -280,50 +281,50 @@
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000023
-				0x00000001 0x0000002a
-				0x00000002 0x00000030
-				0x00000003 0x00000037
-				0x00000004 0x0000003d
-				0x00000005 0x00000044
-				0x00000006 0x0000004a
-				0x00000007 0x00000051
-				0x00000008 0x00000057
-				0x00000009 0x0000005e
-				0x0000000a 0x00000064
-				0x0000000b 0x0000006b
+				<0x00000000 0x00000023>,
+				<0x00000001 0x0000002a>,
+				<0x00000002 0x00000030>,
+				<0x00000003 0x00000037>,
+				<0x00000004 0x0000003d>,
+				<0x00000005 0x00000044>,
+				<0x00000006 0x0000004a>,
+				<0x00000007 0x00000051>,
+				<0x00000008 0x00000057>,
+				<0x00000009 0x0000005e>,
+				<0x0000000a 0x00000064>,
+				<0x0000000b 0x0000006b>,
 				/* Calibration data group 2 */
-				0x00010000 0x00000022
-				0x00010001 0x0000002a
-				0x00010002 0x00000032
-				0x00010003 0x0000003a
-				0x00010004 0x00000042
-				0x00010005 0x0000004a
-				0x00010006 0x00000052
-				0x00010007 0x0000005a
-				0x00010008 0x00000062
-				0x00010009 0x0000006a
+				<0x00010000 0x00000022>,
+				<0x00010001 0x0000002a>,
+				<0x00010002 0x00000032>,
+				<0x00010003 0x0000003a>,
+				<0x00010004 0x00000042>,
+				<0x00010005 0x0000004a>,
+				<0x00010006 0x00000052>,
+				<0x00010007 0x0000005a>,
+				<0x00010008 0x00000062>,
+				<0x00010009 0x0000006a>,
 				/* Calibration data group 3 */
-				0x00020000 0x00000021
-				0x00020001 0x0000002b
-				0x00020002 0x00000035
-				0x00020003 0x00000040
-				0x00020004 0x0000004a
-				0x00020005 0x00000054
-				0x00020006 0x0000005e
+				<0x00020000 0x00000021>,
+				<0x00020001 0x0000002b>,
+				<0x00020002 0x00000035>,
+				<0x00020003 0x00000040>,
+				<0x00020004 0x0000004a>,
+				<0x00020005 0x00000054>,
+				<0x00020006 0x0000005e>,
 				/* Calibration data group 4 */
-				0x00030000 0x00000010
-				0x00030001 0x0000001c
-				0x00030002 0x00000027
-				0x00030003 0x00000032
-				0x00030004 0x0000003e
-				0x00030005 0x00000049
-				0x00030006 0x00000054
-				0x00030007 0x00000060>;
+				<0x00030000 0x00000010>,
+				<0x00030001 0x0000001c>,
+				<0x00030002 0x00000027>,
+				<0x00030003 0x00000032>,
+				<0x00030004 0x0000003e>,
+				<0x00030005 0x00000049>,
+				<0x00030006 0x00000054>,
+				<0x00030007 0x00000060>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
@@ -347,7 +348,7 @@
 			reg = <0x0 0x21c0500 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -356,14 +357,14 @@
 			reg = <0x0 0x21c0600 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		gpio0: gpio@2300000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -374,7 +375,7 @@
 		gpio1: gpio@2310000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -385,7 +386,7 @@
 		gpio2: gpio@2320000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -396,7 +397,7 @@
 		gpio3: gpio@2330000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -407,7 +408,7 @@
 		ifc: memory-controller@2240000 {
 			compatible = "fsl,ifc";
 			reg = <0x0 0x2240000 0x0 0x20000>;
-			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			#address-cells = <2>;
 			#size-cells = <1>;
@@ -419,7 +420,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
-			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -430,7 +431,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
-			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -441,7 +442,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
-			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -452,7 +453,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
-			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -474,10 +475,10 @@
 			status = "disabled";
 		};
 
-		esdhc: esdhc@2140000 {
+		esdhc: mmc@2140000 {
 			compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
-			interrupts = <0 28 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
 			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
@@ -490,7 +491,7 @@
 		usb0: usb@3100000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
-			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
@@ -501,7 +502,7 @@
 		usb1: usb@3110000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
-			interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
@@ -514,7 +515,7 @@
 			reg = <0x0 0x3200000 0x0 0x10000>,
 				<0x7 0x100520 0x0 0x4>;
 			reg-names = "ahci", "sata-ecc";
-			interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			dma-coherent;
@@ -565,7 +566,7 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -575,7 +576,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
@@ -587,10 +588,12 @@
 		};
 
 		pcie_ep1: pcie-ep@3400000 {
-			compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+			compatible = "fsl,ls1088a-pcie-ep";
 			reg = <0x00 0x03400000 0x0 0x00100000>,
 			      <0x20 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
 			num-ib-windows = <24>;
 			num-ob-windows = <256>;
 			max-functions = /bits/ 8 <2>;
@@ -602,7 +605,7 @@
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x28 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -612,7 +615,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>,
@@ -624,10 +627,12 @@
 		};
 
 		pcie_ep2: pcie-ep@3500000 {
-			compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+			compatible = "fsl,ls1088a-pcie-ep";
 			reg = <0x00 0x03500000 0x0 0x00100000>,
 			      <0x28 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <6>;
 			status = "disabled";
@@ -638,7 +643,7 @@
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x30 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -648,7 +653,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>,
@@ -660,10 +665,12 @@
 		};
 
 		pcie_ep3: pcie-ep@3600000 {
-			compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+			compatible = "fsl,ls1088a-pcie-ep";
 			reg = <0x00 0x03600000 0x0 0x00100000>,
 			      <0x30 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <6>;
 			status = "disabled";
@@ -874,7 +881,7 @@
 			};
 		};
 
-		cluster1_core0_watchdog: wdt@c000000 {
+		cluster1_core0_watchdog: watchdog@c000000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -884,7 +891,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core1_watchdog: wdt@c010000 {
+		cluster1_core1_watchdog: watchdog@c010000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -894,7 +901,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core2_watchdog: wdt@c020000 {
+		cluster1_core2_watchdog: watchdog@c020000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc020000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -904,7 +911,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core3_watchdog: wdt@c030000 {
+		cluster1_core3_watchdog: watchdog@c030000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc030000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -914,7 +921,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core0_watchdog: wdt@c100000 {
+		cluster2_core0_watchdog: watchdog@c100000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -924,7 +931,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core1_watchdog: wdt@c110000 {
+		cluster2_core1_watchdog: watchdog@c110000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -934,7 +941,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core2_watchdog: wdt@c120000 {
+		cluster2_core2_watchdog: watchdog@c120000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc120000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -944,7 +951,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core3_watchdog: wdt@c130000 {
+		cluster2_core3_watchdog: watchdog@c130000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc130000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -958,7 +965,7 @@
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
 			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			iommu-map = <0 &smmu 0 0>;	/* This is fixed-up by u-boot */
 			dma-coherent;
 			#address-cells = <3>;
@@ -1027,14 +1034,14 @@
 			};
 		};
 
-		rcpm: power-controller@1e34040 {
+		rcpm: wakeup-controller@1e34040 {
 			compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x18>;
 			#fsl,rcpm-wakeup-cells = <6>;
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,ls1088a-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 1aa38ed09aa4..e9bc1f4fa13c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -12,6 +12,13 @@
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
 #include "fsl-ls208xa.dtsi"
 
+/ {
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &cpu {
 	cpu0: cpu@0 {
 		device_type = "cpu";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index 8581ea55d254..60c422560e33 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -12,6 +12,13 @@
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
 #include "fsl-ls208xa.dtsi"
 
+/ {
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &cpu {
 	cpu0: cpu@0 {
 		device_type = "cpu";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index e2c94da6d6e8..556d8c5f3180 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -43,7 +43,7 @@
 		  0x2 0x0 0x5 0x30000000 0x00010000
 		  0x3 0x0 0x5 0x20000000 0x00010000>;
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
@@ -64,7 +64,7 @@
 		reg = <3 0 0x1000>;
 		ranges = <0 3 0 0x1000>;
 
-		mdio-mux-emi1@54 {
+		mdio-mux@54 {
 			compatible = "mdio-mux-mmioreg", "mdio-mux";
 			mdio-parent-bus = <&emdio1>;
 			reg = <0x54 1>;		/* BRDCFG4 */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 537cecb13dd0..69cd05a30b85 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -21,7 +21,7 @@
 		  0x2 0x0 0x5 0x30000000 0x00010000
 		  0x3 0x0 0x5 0x20000000 0x00010000>;
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 717288bbdb8b..9421fdd7e30e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -58,29 +58,29 @@
 		#size-cells = <2>;
 		ranges;
 		interrupt-controller;
-		interrupts = <1 9 0x4>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
 		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0x6020000 0 0x20000>;
 		};
 	};
 
 	rstcr: syscon@1e60000 {
-		compatible = "fsl,ls2080a-rstcr", "syscon";
+		compatible = "fsl,ls1028a-reset", "syscon", "simple-mfd";
 		reg = <0x0 0x1e60000 0x0 0x4>;
-	};
 
-	reboot {
-		compatible = "syscon-reboot";
-		regmap = <&rstcr>;
-		offset = <0x0>;
-		mask = <0x2>;
+		reboot {
+			compatible = "syscon-reboot";
+			offset = <0x0>;
+			mask = <0x2>;
+		};
 	};
 
 	thermal-zones {
-		ddr-controller1 {
+		ddr-ctrl1-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -94,7 +94,7 @@
 			};
 		};
 
-		ddr-controller2 {
+		ddr-ctrl2-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 2>;
@@ -108,7 +108,7 @@
 			};
 		};
 
-		ddr-controller3 {
+		ddr-ctrl3-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
@@ -122,7 +122,7 @@
 			};
 		};
 
-		core-cluster1 {
+		cluster1-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 4>;
@@ -151,7 +151,7 @@
 			};
 		};
 
-		core-cluster2 {
+		cluster2-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 5>;
@@ -180,7 +180,7 @@
 			};
 		};
 
-		core-cluster3 {
+		cluster3-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 6>;
@@ -209,7 +209,7 @@
 			};
 		};
 
-		core-cluster4 {
+		cluster4-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 7>;
@@ -241,15 +241,10 @@
 
 	timer: timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
-			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
-			     <1 11 4>, /* Virtual PPI, active-low */
-			     <1 10 4>; /* Hypervisor PPI, active-low */
-	};
-
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hypervisor PPI */
 	};
 
 	psci {
@@ -319,44 +314,45 @@
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
-			fsl,tmu-calibration = <0x00000000 0x00000026
-					       0x00000001 0x0000002d
-					       0x00000002 0x00000032
-					       0x00000003 0x00000039
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000046
-					       0x00000006 0x0000004d
-					       0x00000007 0x00000054
-					       0x00000008 0x0000005a
-					       0x00000009 0x00000061
-					       0x0000000a 0x0000006a
-					       0x0000000b 0x00000071
-
-					       0x00010000 0x00000025
-					       0x00010001 0x0000002c
-					       0x00010002 0x00000035
-					       0x00010003 0x0000003d
-					       0x00010004 0x00000045
-					       0x00010005 0x0000004e
-					       0x00010006 0x00000057
-					       0x00010007 0x00000061
-					       0x00010008 0x0000006b
-					       0x00010009 0x00000076
-
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000049
-					       0x00020004 0x00000056
-					       0x00020005 0x00000061
-					       0x00020006 0x0000006d
-
-					       0x00030000 0x00000021
-					       0x00030001 0x0000002a
-					       0x00030002 0x0000003c
-					       0x00030003 0x0000004e>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000026>,
+					<0x00000001 0x0000002d>,
+					<0x00000002 0x00000032>,
+					<0x00000003 0x00000039>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000046>,
+					<0x00000006 0x0000004d>,
+					<0x00000007 0x00000054>,
+					<0x00000008 0x0000005a>,
+					<0x00000009 0x00000061>,
+					<0x0000000a 0x0000006a>,
+					<0x0000000b 0x00000071>,
+
+					<0x00010000 0x00000025>,
+					<0x00010001 0x0000002c>,
+					<0x00010002 0x00000035>,
+					<0x00010003 0x0000003d>,
+					<0x00010004 0x00000045>,
+					<0x00010005 0x0000004e>,
+					<0x00010006 0x00000057>,
+					<0x00010007 0x00000061>,
+					<0x00010008 0x0000006b>,
+					<0x00010009 0x00000076>,
+
+					<0x00020000 0x00000029>,
+					<0x00020001 0x00000033>,
+					<0x00020002 0x0000003d>,
+					<0x00020003 0x00000049>,
+					<0x00020004 0x00000056>,
+					<0x00020005 0x00000061>,
+					<0x00020006 0x0000006d>,
+
+					<0x00030000 0x00000021>,
+					<0x00030001 0x0000002a>,
+					<0x00030002 0x0000003c>,
+					<0x00030003 0x0000004e>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
@@ -366,7 +362,7 @@
 			reg = <0x0 0x21c0500 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial1: serial@21c0600 {
@@ -374,7 +370,7 @@
 			reg = <0x0 0x21c0600 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial2: serial@21d0500 {
@@ -382,7 +378,7 @@
 			reg = <0x0 0x21d0500 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 33 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial3: serial@21d0600 {
@@ -390,10 +386,10 @@
 			reg = <0x0 0x21d0600 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 33 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		cluster1_core0_watchdog: wdt@c000000 {
+		cluster1_core0_watchdog: watchdog@c000000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -403,7 +399,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core1_watchdog: wdt@c010000 {
+		cluster1_core1_watchdog: watchdog@c010000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -413,7 +409,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core0_watchdog: wdt@c100000 {
+		cluster2_core0_watchdog: watchdog@c100000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -423,7 +419,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core1_watchdog: wdt@c110000 {
+		cluster2_core1_watchdog: watchdog@c110000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -433,7 +429,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster3_core0_watchdog: wdt@c200000 {
+		cluster3_core0_watchdog: watchdog@c200000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc200000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -443,7 +439,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster3_core1_watchdog: wdt@c210000 {
+		cluster3_core1_watchdog: watchdog@c210000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc210000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -453,7 +449,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster4_core0_watchdog: wdt@c300000 {
+		cluster4_core0_watchdog: watchdog@c300000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc300000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -463,7 +459,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster4_core1_watchdog: wdt@c310000 {
+		cluster4_core1_watchdog: watchdog@c310000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc310000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -762,7 +758,7 @@
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
 			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			iommu-map = <0 &smmu 0 0>;	/* This is fixed-up by u-boot */
 			dma-coherent;
 			#address-cells = <3>;
@@ -887,48 +883,48 @@
 			#iommu-cells = <1>;
 			stream-match-mask = <0x7C00>;
 			dma-coherent;
-			interrupts = <0 13 4>, /* global secure fault */
-				     <0 14 4>, /* combined secure interrupt */
-				     <0 15 4>, /* global non-secure fault */
-				     <0 16 4>, /* combined non-secure interrupt */
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* global secure fault */
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* combined secure interrupt */
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, /* global non-secure fault */
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, /* combined non-secure interrupt */
 				/* performance counter interrupts 0-7 */
-				     <0 211 4>, <0 212 4>,
-				     <0 213 4>, <0 214 4>,
-				     <0 215 4>, <0 216 4>,
-				     <0 217 4>, <0 218 4>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
 				/* per context interrupt, 64 interrupts */
-				     <0 146 4>, <0 147 4>,
-				     <0 148 4>, <0 149 4>,
-				     <0 150 4>, <0 151 4>,
-				     <0 152 4>, <0 153 4>,
-				     <0 154 4>, <0 155 4>,
-				     <0 156 4>, <0 157 4>,
-				     <0 158 4>, <0 159 4>,
-				     <0 160 4>, <0 161 4>,
-				     <0 162 4>, <0 163 4>,
-				     <0 164 4>, <0 165 4>,
-				     <0 166 4>, <0 167 4>,
-				     <0 168 4>, <0 169 4>,
-				     <0 170 4>, <0 171 4>,
-				     <0 172 4>, <0 173 4>,
-				     <0 174 4>, <0 175 4>,
-				     <0 176 4>, <0 177 4>,
-				     <0 178 4>, <0 179 4>,
-				     <0 180 4>, <0 181 4>,
-				     <0 182 4>, <0 183 4>,
-				     <0 184 4>, <0 185 4>,
-				     <0 186 4>, <0 187 4>,
-				     <0 188 4>, <0 189 4>,
-				     <0 190 4>, <0 191 4>,
-				     <0 192 4>, <0 193 4>,
-				     <0 194 4>, <0 195 4>,
-				     <0 196 4>, <0 197 4>,
-				     <0 198 4>, <0 199 4>,
-				     <0 200 4>, <0 201 4>,
-				     <0 202 4>, <0 203 4>,
-				     <0 204 4>, <0 205 4>,
-				     <0 206 4>, <0 207 4>,
-				     <0 208 4>, <0 209 4>;
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		dspi: spi@2100000 {
@@ -937,18 +933,18 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <0 26 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "dspi";
 			spi-num-chipselects = <5>;
 		};
 
-		esdhc: esdhc@2140000 {
+		esdhc: mmc@2140000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
-			interrupts = <0 28 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			voltage-ranges = <1800 1800 3300 3300>;
@@ -960,7 +956,7 @@
 		gpio0: gpio@2300000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 36 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -971,7 +967,7 @@
 		gpio1: gpio@2310000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 36 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -982,7 +978,7 @@
 		gpio2: gpio@2320000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <0 37 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -993,7 +989,7 @@
 		gpio3: gpio@2330000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <0 37 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -1007,8 +1003,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
-			interrupts = <0 34 0x4>; /* Level high type */
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 		};
@@ -1019,8 +1015,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
-			interrupts = <0 34 0x4>; /* Level high type */
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 		};
@@ -1031,8 +1027,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
-			interrupts = <0 35 0x4>; /* Level high type */
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 		};
@@ -1043,8 +1039,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
-			interrupts = <0 35 0x4>; /* Level high type */
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 		};
@@ -1052,7 +1048,7 @@
 		ifc: memory-controller@2240000 {
 			compatible = "fsl,ifc";
 			reg = <0x0 0x2240000 0x0 0x20000>;
-			interrupts = <0 21 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			#address-cells = <2>;
 			#size-cells = <1>;
@@ -1079,9 +1075,9 @@
 		};
 
 		pcie1: pcie@3400000 {
-			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			compatible = "fsl,ls2080a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 108 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1089,7 +1085,7 @@
 			dma-coherent;
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
@@ -1101,9 +1097,9 @@
 		};
 
 		pcie2: pcie@3500000 {
-			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			compatible = "fsl,ls2080a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 113 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1111,7 +1107,7 @@
 			dma-coherent;
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
@@ -1123,9 +1119,9 @@
 		};
 
 		pcie3: pcie@3600000 {
-			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			compatible = "fsl,ls2080a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 118 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1133,7 +1129,7 @@
 			dma-coherent;
 			num-viewport = <256>;
 			bus-range = <0x0 0xff>;
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
@@ -1145,9 +1141,9 @@
 		};
 
 		pcie4: pcie@3700000 {
-			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			compatible = "fsl,ls2080a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 123 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1155,7 +1151,7 @@
 			dma-coherent;
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
@@ -1170,7 +1166,7 @@
 			status = "disabled";
 			compatible = "fsl,ls2080a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>;
-			interrupts = <0 133 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			dma-coherent;
@@ -1180,7 +1176,7 @@
 			status = "disabled";
 			compatible = "fsl,ls2080a-ahci";
 			reg = <0x0 0x3210000 0x0 0x10000>;
-			interrupts = <0 136 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			dma-coherent;
@@ -1196,7 +1192,7 @@
 			usb0: usb@3100000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x3100000 0x0 0x10000>;
-				interrupts = <0 80 0x4>; /* Level high type */
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -1207,7 +1203,7 @@
 			usb1: usb@3110000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x3110000 0x0 0x10000>;
-				interrupts = <0 81 0x4>; /* Level high type */
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -1219,17 +1215,17 @@
 		ccn@4000000 {
 			compatible = "arm,ccn-504";
 			reg = <0x0 0x04000000 0x0 0x01000000>;
-			interrupts = <0 12 4>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		rcpm: power-controller@1e34040 {
+		rcpm: wakeup-controller@1e34040 {
 			compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x18>;
 			#fsl,rcpm-wakeup-cells = <6>;
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,ls208xa-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
@@ -1240,14 +1236,14 @@
 	ddr1: memory-controller@1080000 {
 		compatible = "fsl,qoriq-memory-controller";
 		reg = <0x0 0x1080000 0x0 0x1000>;
-		interrupts = <0 17 0x4>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		little-endian;
 	};
 
 	ddr2: memory-controller@1090000 {
 		compatible = "fsl,qoriq-memory-controller";
 		reg = <0x0 0x1090000 0x0 0x1000>;
-		interrupts = <0 18 0x4>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 		little-endian;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index d32a52ab00a4..eec2cd6c6d32 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -41,6 +41,7 @@
 	rgmii_phy1: ethernet-phy@1 {
 		reg = <1>;
 		qca,smarteee-tw-us-1g = <24>;
+		interrupts-extended = <&gpio2 4 IRQ_TYPE_EDGE_FALLING>;
 	};
 };
 
@@ -94,9 +95,6 @@
 			fan-temperature-ctrlr@18 {
 				compatible = "ti,amc6821";
 				reg = <0x18>;
-				cooling-min-state = <0>;
-				cooling-max-state = <9>;
-				#cooling-cells = <2>;
 			};
 		};
 
@@ -159,6 +157,7 @@
 	rtc@51 {
 		compatible = "nxp,pcf2129";
 		reg = <0x51>;
+		interrupts-extended = <&gpio2 8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
index a7dcbecc1f41..af6258b2fe82 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -96,6 +96,14 @@
 	status = "okay";
 };
 
+&pcie3 {
+	status = "okay";
+};
+
+&pcie5 {
+	status = "okay";
+};
+
 &pcs_mdio7 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 4d721197d837..2d01e20b47e7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -43,12 +43,22 @@
 			reg = <0x00>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			rgmii_phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-id001c.c916";
+				reg = <0x1>;
+			};
 		};
 
 		mdio@8 { /* On-board PHY #2 RGMI2*/
 			reg = <0x8>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			rgmii_phy2: ethernet-phy@2 {
+				compatible = "ethernet-phy-id001c.c916";
+				reg = <0x2>;
+			};
 		};
 
 		mdio@18 { /* Slot #1 */
@@ -169,6 +179,16 @@
 	status = "okay";
 };
 
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
+
 &dspi0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi
new file mode 100644
index 000000000000..f54005e37924
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160 REV2
+//
+// Copyright 2025 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+&pcie1 {
+	compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+	reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+	      0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+	reg-names = "regs", "config";
+
+	ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
+
+	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "intr";
+
+	/delete-property/ apio-wins;
+	/delete-property/ ppio-wins;
+};
+
+&pcie2 {
+	compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+	reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+	       0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+	reg-names = "regs", "config";
+
+	ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>;
+
+	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "intr";
+
+	/delete-property/ apio-wins;
+	/delete-property/ ppio-wins;
+};
+
+&pcie3 {
+	compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+	reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+	       0x90 0x00000000 0x0 0x00002000>; /* configuration space */
+	reg-names = "regs", "config";
+
+	ranges = <0x81000000 0x0 0x00000000 0x90 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>;
+
+	interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "intr";
+
+	/delete-property/ apio-wins;
+	/delete-property/ ppio-wins;
+};
+
+
+&pcie4 {
+	compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+	reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
+	       0x98 0x00000000 0x0 0x00002000>; /* configuration space */
+	reg-names = "regs", "config";
+
+	ranges = <0x81000000 0x0 0x00000000 0x98 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>;
+
+	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "intr";
+
+	/delete-property/ apio-wins;
+	/delete-property/ ppio-wins;
+};
+
+&pcie5 {
+	compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+	reg = <0x00 0x03800000 0x0 0x00100000   /* controller registers */
+	       0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
+	reg-names = "regs", "config";
+
+	ranges = <0x81000000 0x0 0x00000000 0xa0 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>;
+
+	interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "intr";
+
+	/delete-property/ apio-wins;
+	/delete-property/ ppio-wins;
+};
+
+&pcie6 {
+	compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+	reg = <0x00 0x03900000 0x0 0x00100000   /* controller registers */
+	       0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
+	reg-names = "regs", "config";
+
+	ranges = <0x81000000 0x0 0x00000000 0xa8 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>;
+
+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "intr";
+
+	/delete-property/ apio-wins;
+	/delete-property/ ppio-wins;
+};
+
+&soc {
+	pcie_ep1: pcie-ep@3400000 {
+		compatible = "fsl,lx2160ar2-pcie-ep";
+		reg = <0x00 0x03400000 0x0 0x00100000
+		       0x80 0x00000000 0x8 0x00000000>;
+		reg-names = "regs", "addr_space";
+		num-ob-windows = <8>;
+		num-ib-windows = <8>;
+		status = "disabled";
+	};
+
+	pcie_ep2: pcie-ep@3500000 {
+		compatible = "fsl,lx2160ar2-pcie-ep";
+		reg = <0x00 0x03500000 0x0 0x00100000
+		       0x88 0x00000000 0x8 0x00000000>;
+		reg-names = "regs", "addr_space";
+		num-ob-windows = <8>;
+		num-ib-windows = <8>;
+		status = "disabled";
+	};
+
+	pcie_ep3: pcie-ep@3600000 {
+		compatible = "fsl,lx2160ar2-pcie-ep";
+		reg = <0x00 0x03600000 0x0 0x00100000
+		       0x90 0x00000000 0x8 0x00000000>;
+		reg-names = "regs", "addr_space";
+		num-ob-windows = <256>;
+		num-ib-windows = <24>;
+		status = "disabled";
+	};
+
+	pcie_ep4: pcie-ep@3700000 {
+		compatible = "fsl,lx2160ar2-pcie-ep";
+		reg = <0x00 0x03700000 0x0 0x00100000
+		       0x98 0x00000000 0x8 0x00000000>;
+		reg-names = "regs", "addr_space";
+		num-ob-windows = <8>;
+		num-ib-windows = <8>;
+		status = "disabled";
+	};
+
+
+	pcie_ep5: pcie-ep@3800000 {
+		compatible = "fsl,lx2160ar2-pcie-ep";
+		reg = <0x00 0x03800000 0x0 0x00100000
+		       0xa0 0x00000000 0x8 0x00000000>;
+		reg-names = "regs", "addr_space";
+		num-ob-windows = <256>;
+		num-ib-windows = <24>;
+		status = "disabled";
+	};
+
+	pcie_ep6: pcie-ep@3900000 {
+		compatible = "fsl,lx2160ar2-pcie-ep";
+		reg = <0x00 0x03900000 0x0 0x00100000
+		       0xa8 0x00000000 0x8 0x00000000>;
+		reg-names = "regs", "addr_space";
+		num-ob-windows = <8>;
+		num-ib-windows = <8>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
new file mode 100644
index 000000000000..f6a4f8d54301
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "fsl-lx2160a-tqmlx2160a.dtsi"
+
+/ {
+	model = "TQ Systems GmbH MBLX2160A Starterkit";
+	compatible = "tq,lx2160a-tqmlx2160a-mblx2160a", "tq,lx2160a-tqmlx2160a",
+		     "fsl,lx2160a";
+
+	aliases {
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user1 {
+			label = "button:user1";
+			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F1>;
+		};
+
+		button-user2 {
+			label = "button:user2";
+			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user1 {
+			gpios = <&gpioex1 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <1>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sfp_xfi1: sfp-xfi1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&xfi1_i2c>;
+		mod-def0-gpios = <&gpioex2 2 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioex2 3 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioex2 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioex2 1 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	sfp_xfi2: sfp-xfi2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&xfi2_i2c>;
+		mod-def0-gpios = <&gpioex2 6 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioex2 7 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioex2 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioex2 5 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&dp83867_2_3>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&dp83867_2_4>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	dp83867_1_1: ethernet-phy@1 {
+		reg = <1>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_2: ethernet-phy@2 {
+		reg = <2>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_3: ethernet-phy@3 {
+		reg = <3>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_4: ethernet-phy@4 {
+		reg = <4>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_5: ethernet-phy@5 {
+		reg = <5>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_6: ethernet-phy@6 {
+		reg = <6>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	dp83867_2_1: ethernet-phy@1 {
+		reg = <1>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_2: ethernet-phy@2 {
+		reg = <2>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_3: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_4: ethernet-phy@4 {
+		reg = <4>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	no-mmc;
+	no-sdio;
+	wp-gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	gpioex3: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_vcc3v3>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpioex0: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+
+			gpioex1: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+
+			gpioex2: gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_vcc3v3>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xfi1_i2c: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xfi2_i2c: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&pcs_mdio17 {
+	status = "okay";
+};
+
+&pcs_mdio18 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc3v3>;
+	};
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
new file mode 100644
index 000000000000..8284a564e20d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac9 {
+	phy-handle = <&dp83867_2_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac10 {
+	phy-handle = <&dp83867_2_2>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio9 {
+	status = "okay";
+};
+
+&pcs_mdio10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
new file mode 100644
index 000000000000..636b17a383ed
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac1 {
+	managed = "in-band-status";
+};
+
+&pcs_mdio1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
new file mode 100644
index 000000000000..6d0c808cd840
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+	phy-handle = <&dp83867_1_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac13 {
+	phy-handle = <&dp83867_1_5>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	phy-handle = <&dp83867_1_6>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac16 {
+	phy-handle = <&dp83867_1_4>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
new file mode 100644
index 000000000000..db88a86ff69c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+	phy-handle = <&dp83867_1_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac13 {
+	sfp = <&sfp_xfi1>;
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	sfp = <&sfp_xfi2>;
+	managed = "in-band-status";
+};
+
+&dpmac16 {
+	phy-handle = <&dp83867_1_4>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
+
+&sfp_xfi1 {
+	status = "okay";
+};
+
+&sfp_xfi2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
new file mode 100644
index 000000000000..f6dfa76aa0e7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac13 {
+	sfp = <&sfp_xfi1>;
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	sfp = <&sfp_xfi2>;
+	managed = "in-band-status";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sfp_xfi1 {
+	status = "okay";
+};
+
+&sfp_xfi2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi
new file mode 100644
index 000000000000..89a4765737b4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc1 {
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <10000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+
+	flash1: flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <10000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&i2c0 {
+	scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	sensor0: temperature-sensor@1f {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x1f>;
+	};
+
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+
+	eeprom2: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index f176ca2e244e..c9541403bcd8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -398,6 +398,7 @@
 		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0x6020000 0 0x20000>;
 		};
 	};
@@ -449,7 +450,7 @@
 	};
 
 	thermal-zones {
-		cluster6-7 {
+		cluster6-7-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -492,7 +493,7 @@
 			};
 		};
 
-		ddr-cluster5 {
+		ddr-ctrl5-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -512,7 +513,7 @@
 			};
 		};
 
-		wriop {
+		wriop-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 2>;
@@ -532,7 +533,7 @@
 			};
 		};
 
-		dce-qbman-hsio2 {
+		dce-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
@@ -552,7 +553,7 @@
 			};
 		};
 
-		ccn-dpaa-tbu {
+		ccn-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 4>;
@@ -572,7 +573,7 @@
 			};
 		};
 
-		cluster4-hsio3 {
+		cluster4-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 5>;
@@ -592,7 +593,7 @@
 			};
 		};
 
-		cluster2-3 {
+		cluster2-3-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 6>;
@@ -613,7 +614,7 @@
 		};
 	};
 
-	soc {
+	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -732,9 +733,9 @@
 			fsl,tmu-range = <0x800000e6 0x8001017d>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000035
+				<0x00000000 0x00000035>,
 				/* Calibration data group 2 */
-				0x00000001 0x00000154>;
+				<0x00000001 0x00000154>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
@@ -745,10 +746,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
-			scl-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c0_scl>;
+			pinctrl-1 = <&i2c0_scl_gpio>;
+			scl-gpios = <&gpio0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -758,9 +762,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c1_scl>;
+			pinctrl-1 = <&i2c1_scl_gpio>;
+			scl-gpios = <&gpio0 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -770,9 +778,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c2_scl>;
+			pinctrl-1 = <&i2c2_scl_gpio>;
+			scl-gpios = <&gpio0 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -782,9 +794,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c3_scl>;
+			pinctrl-1 = <&i2c3_scl_gpio>;
+			scl-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -794,10 +810,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2040000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
-			scl-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c4_scl>;
+			pinctrl-1 = <&i2c4_scl_gpio>;
+			scl-gpios = <&gpio0 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -807,9 +826,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2050000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c5_scl>;
+			pinctrl-1 = <&i2c5_scl_gpio>;
+			scl-gpios = <&gpio0 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -819,9 +842,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2060000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c6_scl>;
+			pinctrl-1 = <&i2c6_scl_gpio>;
+			scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -831,9 +858,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2070000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c7_scl>;
+			pinctrl-1 = <&i2c7_scl_gpio>;
+			scl-gpios = <&gpio1 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -895,10 +926,10 @@
 			status = "disabled";
 		};
 
-		esdhc0: esdhc@2140000 {
-			compatible = "fsl,esdhc";
+		esdhc0: mmc@2140000 {
+			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
-			interrupts = <0 28 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			dma-coherent;
@@ -909,10 +940,10 @@
 			status = "disabled";
 		};
 
-		esdhc1: esdhc@2150000 {
-			compatible = "fsl,esdhc";
+		esdhc1: mmc@2150000 {
+			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2150000 0x0 0x10000>;
-			interrupts = <0 63 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			dma-coherent;
@@ -949,39 +980,55 @@
 		};
 
 		uart0: serial@21c0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21c0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart1: serial@21d0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21d0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart2: serial@21e0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21e0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart3: serial@21f0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21f0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -992,7 +1039,7 @@
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -1003,7 +1050,7 @@
 		};
 
 		gpio2: gpio@2320000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -1014,7 +1061,7 @@
 		};
 
 		gpio3: gpio@2330000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -1032,14 +1079,14 @@
 			timeout-sec = <30>;
 		};
 
-		rcpm: power-controller@1e34040 {
+		rcpm: wakeup-controller@1e34040 {
 			compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x1c>;
 			#fsl,rcpm-wakeup-cells = <7>;
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,lx2160a-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
@@ -1135,7 +1182,7 @@
 			ppio-wins = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
@@ -1163,7 +1210,7 @@
 			ppio-wins = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
@@ -1191,7 +1238,7 @@
 			ppio-wins = <24>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
@@ -1219,7 +1266,7 @@
 			ppio-wins = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
@@ -1247,7 +1294,7 @@
 			ppio-wins = <24>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
@@ -1275,7 +1322,7 @@
 			ppio-wins = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -1653,11 +1700,85 @@
 			};
 		};
 
+		pinmux_i2crv: pinmux@70010012c {
+			compatible = "pinctrl-single";
+			reg = <0x00000007 0x0010012c 0x0 0xc>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,bit-per-mux;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x7>;
+
+			i2c1_scl: i2c1-scl-pins {
+				pinctrl-single,bits = <0x0 0 0x7>;
+			};
+
+			i2c1_scl_gpio: i2c1-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 0x1 0x7>;
+			};
+
+			i2c2_scl: i2c2-scl-pins {
+				pinctrl-single,bits = <0x0 0 (0x7 << 3)>;
+			};
+
+			i2c2_scl_gpio: i2c2-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 (0x1 << 3) (0x7 << 3)>;
+			};
+
+			i2c3_scl: i2c3-scl-pins {
+				pinctrl-single,bits = <0x0 0 (0x7 << 6)>;
+			};
+
+			i2c3_scl_gpio: i2c3-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 (0x1 << 6) (0x7 << 6)>;
+			};
+
+			i2c4_scl: i2c4-scl-pins {
+				pinctrl-single,bits = <0x0 0 (0x7 << 9)>;
+			};
+
+			i2c4_scl_gpio: i2c4-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 (0x1 << 9) (0x7 << 9)>;
+			};
+
+			i2c5_scl: i2c5-scl-pins {
+				pinctrl-single,bits = <0x0 0 (0x7 << 12)>;
+			};
+
+			i2c5_scl_gpio: i2c5-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 (0x1 << 12) (0x7 << 12)>;
+			};
+
+			i2c6_scl: i2c6-scl-pins {
+				pinctrl-single,bits = <0x4 0x2 0x7>;
+			};
+
+			i2c6_scl_gpio: i2c6-scl-gpio-pins {
+				pinctrl-single,bits = <0x4 0x1 0x7>;
+			};
+
+			i2c7_scl: i2c7-scl-pins {
+				pinctrl-single,bits = <0x4 0x2 0x7>;
+			};
+
+			i2c7_scl_gpio: i2c7-scl-gpio-pins {
+				pinctrl-single,bits = <0x4 0x1 0x7>;
+			};
+
+			i2c0_scl: i2c0-scl-pins {
+				pinctrl-single,bits = <0x8 0 (0x7 << 10)>;
+			};
+
+			i2c0_scl_gpio: i2c0-scl-gpio-pins {
+				pinctrl-single,bits = <0x8 (0x1 << 10) (0x7 << 10)>;
+			};
+		};
+
 		fsl_mc: fsl-mc@80c000000 {
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,
 			      <0x00000000 0x08340000 0 0x40000>;
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			/* iommu-map property is fixed up by u-boot */
 			iommu-map = <0 &smmu 0 0>;
 			dma-coherent;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
index 9f88583aa25e..eafef8718a0f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
@@ -25,6 +25,7 @@
 		i2c7 = &mpcie1_i2c;
 		i2c8 = &mpcie0_i2c;
 		i2c9 = &pcieclk_i2c;
+		i2c10 = &i2c5;
 		mmc0 = &esdhc0;
 		mmc1 = &esdhc1;
 		serial0 = &uart0;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi
index 0580ea30cfbc..e914291e63a1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi
@@ -71,3 +71,12 @@
 		reg = <0x54>;
 	};
 };
+
+&i2c5 {
+	status = "okay";
+
+	rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx-pcie0-ep.dtso b/arch/arm64/boot/dts/freescale/imx-pcie0-ep.dtso
new file mode 100644
index 000000000000..ed73284d9bb6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx-pcie0-ep.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&pcie0 {
+	status = "disabled";
+};
+
+&pcie0_ep {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx-pcie1-ep.dtso b/arch/arm64/boot/dts/freescale/imx-pcie1-ep.dtso
new file mode 100644
index 000000000000..0e7ef7ef8560
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx-pcie1-ep.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&pcie1 {
+	status = "disabled";
+};
+
+&pcie1_ep {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi
new file mode 100644
index 000000000000..0f77f78f4d96
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+#include "imx8-apalis-eval.dtsi"
+
+/* Apalis CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	status = "okay";
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi
new file mode 100644
index 000000000000..5862b24fb764
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+#include "imx8-apalis-eval.dtsi"
+
+/ {
+	reg_3v3_mmc: regulator-3v3-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_mmc>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_MMC";
+		startup-delay-us = <10000>;
+	};
+
+	reg_3v3_sd: regulator-3v3-sd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_sd>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SD";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can1: regulator-can1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
+		regulator-name = "5V_SW_CAN1";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can2: regulator-can2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can2_power>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+		regulator-name = "5V_SW_CAN2";
+		startup-delay-us = <10000>;
+	};
+
+	sound-carrier {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "apalis-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&nau8822_1a>;
+			system-clock-frequency = <12288000>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai0>;
+		};
+	};
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	xceiver-supply = <&reg_can1>;
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	xceiver-supply = <&reg_can2>;
+	status = "okay";
+};
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+	};
+
+	/* Power/Current Measurement Sensor */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <5000>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&sai0 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai0>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3_mmc>;
+	status = "okay";
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	vmmc-supply = <&reg_3v3_sd>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_cam1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_keys>,
+		    <&pinctrl_gpio_usbh_oc_n>, <&pinctrl_lpuart1ctrl>,
+		    <&pinctrl_lvds0_i2c0_gpio>, <&pinctrl_lvds1_i2c0_gpios>,
+		    <&pinctrl_mipi_dsi_0_1_en>, <&pinctrl_mipi_dsi1_gpios>,
+		    <&pinctrl_mlb_gpios>, <&pinctrl_qspi1a_gpios>,
+		    <&pinctrl_sata1_act>, <&pinctrl_sim0_gpios>,
+		    <&pinctrl_usdhc1_gpios>;
+
+	pinctrl_enable_3v3_mmc: enable3v3mmcgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19	0x00000021>; /* MXM3_148 */
+	};
+
+	pinctrl_enable_3v3_sd: enable3v3sdgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20	0x00000021>; /* MXM3_152 */
+	};
+
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021>; /* MXM3_158 */
+	};
+
+	pinctrl_enable_can2_power: enablecan2powergrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x00000021>; /* MXM3_156 */
+	};
+
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <IMX8QM_SAI1_RXC_AUD_SAI0_TXD	0xc600006c>, /* MXM3_196 */
+			   <IMX8QM_SPI0_CS1_AUD_SAI0_TXC	0xc600004c>, /* MXM3_200 */
+			   <IMX8QM_SAI1_RXFS_AUD_SAI0_RXD	0xc600004c>, /* MXM3_202 */
+			   <IMX8QM_SPI2_CS1_AUD_SAI0_TXFS	0xc600004c>; /* MXM3_204 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
index 685d4294f4f1..311d4950793c 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
@@ -22,9 +22,13 @@
 	status = "okay";
 };
 
-/* TODO: Audio Mixer */
+&amix {
+	status = "okay";
+};
 
-/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+&asrc0 {
+	status = "okay";
+};
 
 /* TODO: Display Controller */
 
@@ -35,18 +39,6 @@
 	status = "okay";
 };
 
-/* Apalis CAN1 */
-&flexcan1 {
-	status = "okay";
-};
-
-/* Apalis CAN2 */
-&flexcan2 {
-	status = "okay";
-};
-
-/* TODO: GPU */
-
 /* Apalis I2C1 */
 &i2c2 {
 	status = "okay";
@@ -112,33 +104,44 @@
 	status = "okay";
 };
 
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+	status = "okay";
+};
 
 /* TODO: Apalis BKL1_PWM */
 
-/* TODO: Apalis DAP1 */
-
-/* TODO: Apalis Analogue Audio */
+/* Apalis DAP1 */
+&sai1 {
+	status = "okay";
+};
 
-/* TODO: Apalis SATA1 */
+&sai5 {
+	status = "okay";
+};
 
-/* TODO: Apalis SPDIF1 */
+&sai5_lpcg {
+	status = "okay";
+};
 
-/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+/* Apalis SATA1 */
+&sata {
+	status = "okay";
+};
 
-/* Apalis USBO1 */
-&usbotg1 {
+/* Apalis SPDIF1 */
+&spdif0 {
 	status = "okay";
 };
 
-/* TODO: Apalis USBH4 SuperSpeed */
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
 
-/* Apalis MMC1 */
-&usdhc2 {
+/* Apalis USBO1 */
+&usbotg1 {
 	status = "okay";
 };
 
-/* Apalis SD1 */
-&usdhc3 {
+/* Apalis USBH4 SuperSpeed */
+&usbotg3_cdns3 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
index 5438923a905c..3d8731504ce1 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
@@ -62,9 +62,13 @@
 	status = "okay";
 };
 
-/* TODO: Audio Mixer */
+&amix {
+	status = "okay";
+};
 
-/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+&asrc0 {
+	status = "okay";
+};
 
 /* TODO: Display Controller */
 
@@ -187,17 +191,35 @@
 	status = "okay";
 };
 
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+	status = "okay";
+};
 
 /* TODO: Apalis BKL1_PWM */
 
-/* TODO: Apalis DAP1 */
+/* Apalis DAP1 */
+&sai1 {
+	status = "okay";
+};
 
-/* TODO: Apalis Analogue Audio */
+&sai5 {
+	status = "okay";
+};
 
-/* TODO: Apalis SATA1 */
+&sai5_lpcg {
+	status = "okay";
+};
 
-/* TODO: Apalis SPDIF1 */
+/* Apalis SATA1 */
+&sata {
+	status = "okay";
+};
+
+/* Apalis SPDIF1 */
+&spdif0 {
+	status = "okay";
+};
 
 /* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
 
@@ -206,7 +228,10 @@
 	status = "okay";
 };
 
-/* TODO: Apalis USBH4 SuperSpeed */
+/* Apalis USBH4 SuperSpeed */
+&usbotg3_cdns3 {
+	status = "okay";
+};
 
 /* Apalis MMC1 */
 &usdhc2 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
index 72136c436a70..106e802a68ba 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
@@ -68,6 +68,7 @@
 		gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_can2_supply: regulator-can2-supply {
@@ -77,6 +78,7 @@
 		gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_usb_host_vbus: regulator-usb-host-vbus {
@@ -92,9 +94,13 @@
 	status = "okay";
 };
 
-/* TODO: Audio Mixer */
+&amix {
+	status = "okay";
+};
 
-/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+&asrc0 {
+	status = "okay";
+};
 
 /* TODO: Display Controller */
 
@@ -234,17 +240,35 @@
 	status = "okay";
 };
 
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+	status = "okay";
+};
 
 /* TODO: Apalis BKL1_PWM */
 
-/* TODO: Apalis DAP1 */
+/* Apalis DAP1 */
+&sai1 {
+	status = "okay";
+};
 
-/* TODO: Apalis Analogue Audio */
+&sai5 {
+	status = "okay";
+};
 
-/* TODO: Apalis SATA1 */
+&sai5_lpcg {
+	status = "okay";
+};
 
-/* TODO: Apalis SPDIF1 */
+/* Apalis SATA1 */
+&sata {
+	status = "okay";
+};
+
+/* Apalis SPDIF1 */
+&spdif0 {
+	status = "okay";
+};
 
 /* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
 
@@ -253,7 +277,10 @@
 	status = "okay";
 };
 
-/* TODO: Apalis USBH4 SuperSpeed */
+/* Apalis USBH4 SuperSpeed */
+&usbotg3_cdns3 {
+	status = "okay";
+};
 
 /* Apalis MMC1 */
 &usdhc2 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
index f69b0c17560a..86d018f470c1 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -126,6 +126,13 @@
 		regulator-name = "usb-phy-dummy";
 	};
 
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -198,11 +205,32 @@
 		};
 	};
 
-	/* TODO: Apalis Analogue Audio */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "apalis-imx8qm";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
 
 	/* TODO: HDMI Audio */
 
-	/* TODO: Apalis SPDIF1 */
+	/* Apalis SPDIF1 */
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif0>;
+		spdif-in;
+		spdif-out;
+	};
 
 	touchscreen: touchscreen {
 		compatible = "toradex,vf50-touchscreen";
@@ -227,6 +255,10 @@
 
 };
 
+&asrc0 {
+	fsl,asrc-rate = <48000>;
+};
+
 &adc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc0>;
@@ -239,6 +271,30 @@
 
 /* TODO: Asynchronous Sample Rate Converter (ASRC) */
 
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_alert1 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&cpu_crit1 {
+	temperature = <105000>;
+};
+
+&drc_alert0 {
+	temperature = <95000>;
+};
+
+&drc_crit0 {
+	temperature = <105000>;
+};
+
 /* Apalis ETH1 */
 &fec1 {
 	pinctrl-names = "default", "sleep";
@@ -261,7 +317,6 @@
 			reset-assert-us = <2>;
 			reset-deassert-us = <2>;
 			reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>;
-			reset-names = "phy";
 		};
 	};
 };
@@ -284,8 +339,43 @@
 	pinctrl-0 = <&pinctrl_flexcan3>;
 };
 
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-pcieb-sata";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&hsio_refa_clk {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_sata_refclk>;
+	enable-gpios = <&lsio_gpio4 11 GPIO_ACTIVE_HIGH>;
+};
+
+&hsio_refb_clk {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
+	clocks = <&hsio_refa_clk>;
+	enable-gpios = <&lsio_gpio2 11 GPIO_ACTIVE_HIGH>;
+};
+
 /* TODO: Apalis HDMI1 */
 
+&gpu_alert0 {
+	temperature = <95000>;
+};
+
+&gpu_alert1 {
+	temperature = <95000>;
+};
+
+&gpu_crit0 {
+	temperature = <105000>;
+};
+
+&gpu_crit1 {
+	temperature = <105000>;
+};
+
 /* On-module I2C */
 &i2c1 {
 	pinctrl-names = "default";
@@ -295,8 +385,6 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	/* TODO: Audio Codec */
-
 	/* USB3503A */
 	usb-hub@8 {
 		compatible = "smsc,usb3503a";
@@ -309,6 +397,24 @@
 		refclk-frequency = <25000000>;
 		reset-gpios = <&lsio_gpio1 2 GPIO_ACTIVE_LOW>;
 	};
+	
+	/* On Module Audio Codec */
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_module_3v3_avdd>;
+		VDDD-supply = <&reg_vref_1v8>;
+		VDDIO-supply = <&reg_module_3v3>;
+	};
 };
 
 /* Apalis I2C1 */
@@ -427,7 +533,10 @@
 			  "MXM3_112",
 			  "MXM3_118",
 			  "MXM3_114",
-			  "MXM3_116";
+			  "MXM3_116",
+			  "",
+			  "",
+			  "MXM3_26";
 };
 
 &lsio_gpio1 {
@@ -499,15 +608,6 @@
 			  "MXM3_183",
 			  "MXM3_185",
 			  "MXM3_187";
-
-	pcie-wifi-hog {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
-		gpio-hog;
-		gpios = <11 GPIO_ACTIVE_HIGH>;
-		line-name = "PCIE_WIFI_CLK";
-		output-high;
-	};
 };
 
 &lsio_gpio3 {
@@ -573,16 +673,6 @@
 			  "MXM3_291",
 			  "MXM3_289",
 			  "MXM3_287";
-
-	/* Enable pcie root / sata ref clock unconditionally */
-	pcie-sata-hog {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_sata_refclk>;
-		gpio-hog;
-		gpios = <11 GPIO_ACTIVE_HIGH>;
-		line-name = "PCIE_SATA_CLK";
-		output-high;
-	};
 };
 
 &lsio_gpio5 {
@@ -684,25 +774,89 @@
 	status = "okay";
 };
 
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	reset-gpio = <&lsio_gpio0 30 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_switch>;
+};
 
-/* TODO: On-module Wi-Fi */
+/* On-module Wi-Fi */
+&pcieb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcieb>, <&pinctrl_wifi>;
+	phys = <&hsio_phy 1 PHY_TYPE_PCIE 1>;
+	phy-names = "pcie-phy";
+	reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
 
-/* TODO: Apalis BKL1_PWM */
+&phyx2_lpcg {
+	clocks = <&hsio_refa_clk>, <&hsio_refb_clk>,
+		 <&hsio_refa_clk>, <&hsio_per_clk>;
+};
 
-/* TODO: Apalis DAP1 */
+/* TODO: Apalis BKL1_PWM */
 
-/* TODO: Analogue Audio */
+/* Apalis DAP1 */
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
 
-/* TODO: Apalis SATA1 */
+/* Apalis HDMI Audio */
+&sai5 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+			  <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai5_lpcg 0>;
+	assigned-clock-parents = <&aud_pll_div0_lpcg 0>, <&aud_rec1_lpcg 0>;
+	assigned-clock-rates = <0>, <0>, <786432000>, <49152000>, <12288000>,
+			       <722534400>, <45158400>, <11289600>, <49152000>;
+};
 
-/* TODO: Apalis SPDIF1 */
+/* Apalis SPDIF1 */
+&spdif0 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif0>;
+	status = "okay";
+};
 
 /* TODO: Thermal Zones */
 
 /* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
 
-/* TODO: Apalis USBH4 */
+/* Apalis USBH4 */
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "host";
+};
 
 /* Apalis USBO1 */
 &usbphy1 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index 9d75ce467569..c32a6947ae9c 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -4,7 +4,9 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+#include <dt-bindings/clock/imx8-clock.h>
 #include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/dma/fsl-edma.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
 audio_ipg_clk: clock-audio-ipg {
@@ -14,17 +16,261 @@ audio_ipg_clk: clock-audio-ipg {
 	clock-output-names = "audio_ipg_clk";
 };
 
+clk_ext_aud_mclk0: clock-ext-aud-mclk0 {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "ext_aud_mclk0";
+};
+
+clk_ext_aud_mclk1: clock-ext-aud-mclk1 {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "ext_aud_mclk1";
+};
+
+clk_esai0_rx_clk: clock-esai0-rx {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_rx_clk";
+};
+
+clk_esai0_rx_hf_clk: clock-esai0-rx-hf {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_rx_hf_clk";
+};
+
+clk_esai0_tx_clk: clock-esai0-tx {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_tx_clk";
+};
+
+clk_esai0_tx_hf_clk: clock-esai0-tx-hf {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_tx_hf_clk";
+};
+
+clk_spdif0_rx: clock-spdif0-rx {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "spdif0_rx";
+};
+
+clk_sai0_rx_bclk: clock-sai0-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai0_rx_bclk";
+};
+
+clk_sai0_tx_bclk: clock-sai0-tx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai0_tx_bclk";
+};
+
+clk_sai1_rx_bclk: clock-sai1-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai1_rx_bclk";
+};
+
+clk_sai1_tx_bclk: clock-sai1-tx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai1_tx_bclk";
+};
+
+clk_sai2_rx_bclk: clock-sai2-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai2_rx_bclk";
+};
+
+clk_sai3_rx_bclk: clock-sai3-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai3_rx_bclk";
+};
+
+clk_sai4_rx_bclk: clock-sai4-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai4_rx_bclk";
+};
+
 audio_subsys: bus@59000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x59000000 0x0 0x59000000 0x1000000>;
 
+	asrc0: asrc@59000000 {
+		compatible = "fsl,imx8qm-asrc";
+		reg = <0x59000000 0x10000>;
+		interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&asrc0_lpcg IMX_LPCG_CLK_0>,
+			 <&asrc0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div0_lpcg IMX_LPCG_CLK_4>,
+			 <&aud_pll_div1_lpcg IMX_LPCG_CLK_4>,
+			 <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+			 <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "mem", "ipg",
+			      "asrck_0", "asrck_1", "asrck_2", "asrck_3",
+			      "asrck_4", "asrck_5", "asrck_6", "asrck_7",
+			      "asrck_8", "asrck_9", "asrck_a", "asrck_b",
+			      "asrck_c", "asrck_d", "asrck_e", "asrck_f",
+			      "spba";
+		dmas = <&edma0 0 0 0>,
+		       <&edma0 1 0 0>,
+		       <&edma0 2 0 0>,
+		       <&edma0 3 0 FSL_EDMA_RX>,
+		       <&edma0 4 0 FSL_EDMA_RX>,
+		       <&edma0 5 0 FSL_EDMA_RX>;
+		/* tx* is output channel of asrc, it is rx channel for eDMA */
+		dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
+		fsl,asrc-rate = <8000>;
+		fsl,asrc-width = <16>;
+		fsl,asrc-clk-map = <0>;
+		power-domains = <&pd IMX_SC_R_ASRC_0>;
+		status = "disabled";
+	};
+
+	esai0: esai@59010000 {
+		compatible = "fsl,imx8qm-esai", "fsl,imx6ull-esai";
+		reg = <0x59010000 0x10000>;
+		interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&esai0_lpcg IMX_LPCG_CLK_4>,
+			 <&esai0_lpcg IMX_LPCG_CLK_0>,
+			 <&esai0_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>;
+		clock-names = "core", "extal", "fsys", "spba";
+		dmas = <&edma0 6 0 FSL_EDMA_RX>, <&edma0 7 0 0>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd IMX_SC_R_ESAI_0>;
+		status = "disabled";
+	};
+
+	spdif0: spdif@59020000 {
+		compatible = "fsl,imx8qm-spdif";
+		reg = <0x59020000 0x10000>;
+		interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, /* rx */
+			     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; /* tx */
+		clocks = <&spdif0_lpcg IMX_LPCG_CLK_4>,	/* core */
+			 <&clk_dummy>,			/* rxtx0 */
+			 <&spdif0_lpcg IMX_LPCG_CLK_0>,	/* rxtx1 */
+			 <&clk_dummy>,			/* rxtx2 */
+			 <&clk_dummy>,			/* rxtx3 */
+			 <&clk_dummy>,			/* rxtx4 */
+			 <&audio_ipg_clk>,		/* rxtx5 */
+			 <&clk_dummy>,			/* rxtx6 */
+			 <&clk_dummy>,			/* rxtx7 */
+			 <&clk_dummy>;			/* spba */
+		clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4",
+			      "rxtx5", "rxtx6", "rxtx7", "spba";
+		dmas = <&edma0 8 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>,
+		       <&edma0 9 0 FSL_EDMA_MULTI_FIFO>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd IMX_SC_R_SPDIF_0>;
+		status = "disabled";
+	};
+
+	sai0: sai@59040000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59040000 0x10000>;
+		interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai0_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai0_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx", "tx";
+		dmas = <&edma0 12 0 1>, <&edma0 13 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_0>;
+		status = "disabled";
+	};
+
+	sai1: sai@59050000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59050000 0x10000>;
+		interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai1_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai1_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx", "tx";
+		dmas = <&edma0 14 0 1>, <&edma0 15 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_1>;
+		status = "disabled";
+	};
+
+	sai2: sai@59060000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59060000 0x10000>;
+		interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai2_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai2_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx";
+		dmas = <&edma0 16 0 1>;
+		power-domains = <&pd IMX_SC_R_SAI_2>;
+		status = "disabled";
+	};
+
+	sai3: sai@59070000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59070000 0x10000>;
+		interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai3_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai3_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx";
+		dmas = <&edma0 17 0 1>;
+		power-domains = <&pd IMX_SC_R_SAI_3>;
+		status = "disabled";
+	};
+
 	edma0: dma-controller@591f0000 {
 		compatible = "fsl,imx8qm-edma";
 		reg = <0x591f0000 0x190000>;
 		#dma-cells = <3>;
-		shared-interrupt;
 		dma-channels = <24>;
 		dma-channel-mask = <0x5c0c00>;
 		interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 0 */
@@ -77,6 +323,88 @@ audio_subsys: bus@59000000 {
 				<&pd IMX_SC_R_DMA_0_CH23>;
 	};
 
+	asrc0_lpcg: clock-controller@59400000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59400000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "asrc0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ASRC_0>;
+	};
+
+	esai0_lpcg: clock-controller@59410000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59410000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "esai0_lpcg_extal_clk",
+				     "esai0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ESAI_0>;
+	};
+
+	spdif0_lpcg: clock-controller@59420000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59420000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SPDIF0_TX_CLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spdif0_lpcg_tx_clk",
+				     "spdif0_lpcg_gclkw";
+		power-domains = <&pd IMX_SC_R_SPDIF_0>;
+	};
+
+	sai0_lpcg: clock-controller@59440000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59440000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI0_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai0_lpcg_mclk",
+				     "sai0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_0>;
+	};
+
+	sai1_lpcg: clock-controller@59450000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59450000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI1_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai1_lpcg_mclk",
+				     "sai1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_1>;
+	};
+
+	sai2_lpcg: clock-controller@59460000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59460000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI2_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai2_lpcg_mclk",
+				     "sai2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_2>;
+	};
+
+	sai3_lpcg: clock-controller@59470000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59470000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI3_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai3_lpcg_mclk",
+				     "sai3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_3>;
+	};
+
 	dsp_lpcg: clock-controller@59580000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x59580000 0x10000>;
@@ -103,23 +431,114 @@ audio_subsys: bus@59000000 {
 	};
 
 	dsp: dsp@596e8000 {
-		compatible = "fsl,imx8qxp-dsp";
+		compatible = "fsl,imx8qxp-hifi4";
 		reg = <0x596e8000 0x88000>;
 		clocks = <&dsp_lpcg IMX_LPCG_CLK_5>,
 			 <&dsp_ram_lpcg IMX_LPCG_CLK_4>,
 			 <&dsp_lpcg IMX_LPCG_CLK_7>;
 		clock-names = "ipg", "ocram", "core";
-		power-domains = <&pd IMX_SC_R_MU_13A>,
-			<&pd IMX_SC_R_MU_13B>,
-			<&pd IMX_SC_R_DSP>,
-			<&pd IMX_SC_R_DSP_RAM>;
-		mbox-names = "txdb0", "txdb1",
-			"rxdb0", "rxdb1";
-		mboxes = <&lsio_mu13 2 0>,
-			<&lsio_mu13 2 1>,
-			<&lsio_mu13 3 0>,
-			<&lsio_mu13 3 1>;
-		memory-region = <&dsp_reserved>;
+		power-domains = <&pd IMX_SC_R_MU_13B>,
+				<&pd IMX_SC_R_MU_2A>;
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu13 0 0>,
+			 <&lsio_mu13 1 0>,
+			 <&lsio_mu13 3 0>;
+		firmware-name = "imx/dsp/hifi4.bin";
+		status = "disabled";
+	};
+
+	asrc1: asrc@59800000 {
+		compatible = "fsl,imx8qm-asrc";
+		reg = <0x59800000 0x10000>;
+		interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&asrc1_lpcg IMX_LPCG_CLK_4>,
+			 <&asrc1_lpcg IMX_LPCG_CLK_4>,
+			 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+			 <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+			 <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "mem", "ipg",
+			      "asrck_0", "asrck_1", "asrck_2", "asrck_3",
+			      "asrck_4", "asrck_5", "asrck_6", "asrck_7",
+			      "asrck_8", "asrck_9", "asrck_a", "asrck_b",
+			      "asrck_c", "asrck_d", "asrck_e", "asrck_f",
+			      "spba";
+		dmas = <&edma1 0 0 0>,
+		       <&edma1 1 0 0>,
+		       <&edma1 2 0 0>,
+		       <&edma1 3 0 FSL_EDMA_RX>,
+		       <&edma1 4 0 FSL_EDMA_RX>,
+		       <&edma1 5 0 FSL_EDMA_RX>;
+		/* tx* is output channel of asrc, it is rx channel for eDMA */
+		dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
+		fsl,asrc-rate = <8000>;
+		fsl,asrc-width = <16>;
+		fsl,asrc-clk-map = <1>;
+		power-domains = <&pd IMX_SC_R_ASRC_1>;
+		status = "disabled";
+	};
+
+	sai4: sai@59820000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59820000 0x10000>;
+		interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai4_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai4_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dmas = <&edma1 8 0 FSL_EDMA_RX>, <&edma1 9 0 0>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd IMX_SC_R_SAI_4>;
+		status = "disabled";
+	};
+
+	sai5: sai@59830000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59830000 0x10000>;
+		interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai5_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai5_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dmas = <&edma1 10 0 0>;
+		dma-names = "tx";
+		power-domains = <&pd IMX_SC_R_SAI_5>;
+		status = "disabled";
+	};
+
+	amix: amix@59840000 {
+		compatible = "fsl,imx8qm-audmix";
+		reg = <0x59840000 0x10000>;
+		clocks = <&amix_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_AMIX>;
+		dais = <&sai4>, <&sai5>;
+		status = "disabled";
+	};
+
+	mqs: mqs@59850000 {
+		compatible = "fsl,imx8qm-mqs";
+		reg = <0x59850000 0x10000>;
+		clocks = <&mqs0_lpcg IMX_LPCG_CLK_4>, <&mqs0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "mclk", "core";
+		power-domains = <&pd IMX_SC_R_MQS_0>;
 		status = "disabled";
 	};
 
@@ -127,7 +546,6 @@ audio_subsys: bus@59000000 {
 		compatible = "fsl,imx8qm-edma";
 		reg = <0x599f0000 0xc0000>;
 		#dma-cells = <3>;
-		shared-interrupt;
 		dma-channels = <11>;
 		dma-channel-mask = <0xc0>;
 		interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 1 */
@@ -153,4 +571,179 @@ audio_subsys: bus@59000000 {
 				<&pd IMX_SC_R_DMA_1_CH9>,
 				<&pd IMX_SC_R_DMA_1_CH10>;
 	};
+
+	aud_rec0_lpcg: clock-controller@59d00000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d00000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_rec_clk0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_0>;
+	};
+
+	aud_rec1_lpcg: clock-controller@59d10000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d10000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_rec_clk1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_1>;
+	};
+
+	aud_pll_div0_lpcg: clock-controller@59d20000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_pll_div_clk0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_0>;
+	};
+
+	aud_pll_div1_lpcg: clock-controller@59d30000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_pll_div_clk1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_1>;
+	};
+
+	mclkout0_lpcg: clock-controller@59d50000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d50000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_MCLKOUT0_SEL>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mclkout0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MCLK_OUT_0>;
+	};
+
+	mclkout1_lpcg: clock-controller@59d60000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d60000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_MCLKOUT1_SEL>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mclkout1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MCLK_OUT_1>;
+	};
+
+	acm: acm@59e00000 {
+		compatible = "fsl,imx8qxp-acm";
+		reg = <0x59e00000 0x1d0000>;
+		#clock-cells = <1>;
+		power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+				<&pd IMX_SC_R_AUDIO_CLK_1>,
+				<&pd IMX_SC_R_MCLK_OUT_0>,
+				<&pd IMX_SC_R_MCLK_OUT_1>,
+				<&pd IMX_SC_R_AUDIO_PLL_0>,
+				<&pd IMX_SC_R_AUDIO_PLL_1>,
+				<&pd IMX_SC_R_ASRC_0>,
+				<&pd IMX_SC_R_ASRC_1>,
+				<&pd IMX_SC_R_ESAI_0>,
+				<&pd IMX_SC_R_SAI_0>,
+				<&pd IMX_SC_R_SAI_1>,
+				<&pd IMX_SC_R_SAI_2>,
+				<&pd IMX_SC_R_SAI_3>,
+				<&pd IMX_SC_R_SAI_4>,
+				<&pd IMX_SC_R_SAI_5>,
+				<&pd IMX_SC_R_SPDIF_0>,
+				<&pd IMX_SC_R_MQS_0>;
+		clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_ext_aud_mclk0>,
+			 <&clk_ext_aud_mclk1>,
+			 <&clk_esai0_rx_clk>,
+			 <&clk_esai0_rx_hf_clk>,
+			 <&clk_esai0_tx_clk>,
+			 <&clk_esai0_tx_hf_clk>,
+			 <&clk_spdif0_rx>,
+			 <&clk_sai0_rx_bclk>,
+			 <&clk_sai0_tx_bclk>,
+			 <&clk_sai1_rx_bclk>,
+			 <&clk_sai1_tx_bclk>,
+			 <&clk_sai2_rx_bclk>,
+			 <&clk_sai3_rx_bclk>,
+			 <&clk_sai4_rx_bclk>;
+		clock-names = "aud_rec_clk0_lpcg_clk",
+			      "aud_rec_clk1_lpcg_clk",
+			      "aud_pll_div_clk0_lpcg_clk",
+			      "aud_pll_div_clk1_lpcg_clk",
+			      "ext_aud_mclk0",
+			      "ext_aud_mclk1",
+			      "esai0_rx_clk",
+			      "esai0_rx_hf_clk",
+			      "esai0_tx_clk",
+			      "esai0_tx_hf_clk",
+			      "spdif0_rx",
+			      "sai0_rx_bclk",
+			      "sai0_tx_bclk",
+			      "sai1_rx_bclk",
+			      "sai1_tx_bclk",
+			      "sai2_rx_bclk",
+			      "sai3_rx_bclk",
+			      "sai4_rx_bclk";
+	};
+
+	asrc1_lpcg: clock-controller@59c00000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c00000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "asrc1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ASRC_1>;
+	};
+
+	sai4_lpcg: clock-controller@59c20000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai4_lpcg_mclk",
+				     "sai4_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_4>;
+	};
+
+	sai5_lpcg: clock-controller@59c30000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai5_lpcg_mclk",
+				     "sai5_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_5>;
+	};
+
+	amix_lpcg: clock-controller@59c40000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c40000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "amix_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_AMIX>;
+	};
+
+	mqs0_lpcg: clock-controller@59c50000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c50000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_MQS_TX_CLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "mqs0_lpcg_mclk",
+				     "mqs0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MQS_0>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
new file mode 100644
index 000000000000..92752c0c5eb5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+cm40_ipg_clk: clock-cm40-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <132000000>;
+	clock-output-names = "cm40_ipg_clk";
+};
+
+cm40_subsys: bus@34000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x34000000 0x0 0x34000000 0x4000000>;
+	interrupt-parent = <&cm40_intmux>;
+
+	cm40_lpuart: serial@37220000 {
+		compatible = "fsl,imx8qxp-lpuart";
+		reg = <0x37220000 0x1000>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cm40_uart_lpcg IMX_LPCG_CLK_1>, <&cm40_uart_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_M4_0_UART>;
+		status = "disabled";
+	};
+
+	cm40_i2c: i2c@37230000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x37230000 0x1000>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cm40_i2c_lpcg IMX_LPCG_CLK_0>,
+			 <&cm40_i2c_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_M4_0_I2C IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_M4_0_I2C>;
+		status = "disabled";
+	};
+
+	cm40_intmux: intmux@37400000 {
+		compatible = "fsl,imx-intmux";
+		reg = <0x37400000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&cm40_ipg_clk>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_M4_0_INTMUX>;
+		status = "disabled";
+	};
+
+	cm40_uart_lpcg: clock-controller@37620000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x37620000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>,
+			 <&cm40_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>;
+		clock-output-names = "cm40_lpcg_uart_clk",
+				     "cm40_lpcg_uart_ipg_clk";
+		power-domains = <&pd IMX_SC_R_M4_0_UART>;
+	};
+
+	cm40_i2c_lpcg: clock-controller@37630000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x37630000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_M4_0_I2C IMX_SC_PM_CLK_PER>,
+			 <&cm40_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "cm40_lpcg_i2c_clk",
+				     "cm40_lpcg_i2c_ipg_clk";
+		power-domains = <&pd IMX_SC_R_M4_0_I2C>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-cm41.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-cm41.dtsi
new file mode 100644
index 000000000000..d715f2a6b037
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-cm41.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/clock/imx8-lpcg.h>
+
+cm41_ipg_clk: clock-cm41-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <132000000>;
+	clock-output-names = "cm41_ipg_clk";
+};
+
+cm41_subsys: bus@38000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x38000000 0x0 0x38000000 0x4000000>;
+	interrupt-parent = <&cm41_intmux>;
+
+	cm41_i2c: i2c@3b230000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x3b230000 0x1000>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cm41_i2c_lpcg IMX_LPCG_CLK_0>,
+			 <&cm41_i2c_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_M4_1_I2C IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_M4_1_I2C>;
+		status = "disabled";
+	};
+
+	cm41_intmux: intmux@3b400000 {
+		compatible = "fsl,imx-intmux";
+		reg = <0x3b400000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&cm41_ipg_clk>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_M4_1_INTMUX>;
+		status = "disabled";
+	};
+
+	cm41_i2c_lpcg: clock-controller@3b630000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x3b630000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_M4_1_I2C IMX_SC_PM_CLK_PER>,
+			 <&cm41_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "cm41_lpcg_i2c_clk",
+				     "cm41_lpcg_i2c_ipg_clk";
+		power-domains = <&pd IMX_SC_R_M4_1_I2C>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index 3c42240e78e2..ce6ef160fd55 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -28,6 +28,13 @@ conn_ipg_clk: clock-conn-ipg {
 	clock-output-names = "conn_ipg_clk";
 };
 
+conn_bch_clk: clock-conn-bch {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <400000000>;
+	clock-output-names = "conn_bch_clk";
+};
+
 conn_subsys: bus@5b000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
@@ -41,7 +48,7 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		fsl,usbphy = <&usbphy1>;
 		fsl,usbmisc = <&usbmisc1 0>;
-		clocks = <&usb2_lpcg 0>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
 		ahb-burst-config = <0x0>;
 		tx-burst-size-dword = <0x10>;
 		rx-burst-size-dword = <0x10>;
@@ -58,7 +65,7 @@ conn_subsys: bus@5b000000 {
 	usbphy1: usbphy@5b100000 {
 		compatible = "fsl,imx7ulp-usbphy";
 		reg = <0x5b100000 0x1000>;
-		clocks = <&usb2_lpcg 1>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
 		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
 		status = "disabled";
 	};
@@ -67,8 +74,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
@@ -78,8 +85,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
@@ -91,8 +98,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
@@ -302,4 +309,66 @@ conn_subsys: bus@5b000000 {
 				     "usb3_aclk";
 		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
 	};
+
+	rawnand_0_lpcg: clock-controller@5b290000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b290000 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_MST_BUS>,
+			 <&conn_axi_clk>,
+			 <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "gpmi_bch",
+				     "gpmi_io",
+				     "gpmi_apb",
+				     "gpmi_bch_apb";
+		power-domains = <&pd IMX_SC_R_NAND>;
+	};
+
+	rawnand_4_lpcg: clock-controller@5b290004 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b290004 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "apbhdma_hclk";
+		power-domains = <&pd IMX_SC_R_NAND>;
+	};
+
+	dma_apbh: dma-controller@5b810000 {
+		compatible = "fsl,imx8qxp-dma-apbh", "fsl,imx28-dma-apbh";
+		reg = <0x5b810000 0x2000>;
+		interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		dma-channels = <4>;
+		clocks = <&rawnand_4_lpcg IMX_LPCG_CLK_0>;
+		power-domains = <&pd IMX_SC_R_NAND>;
+	};
+
+	gpmi: nand-controller@5b812000 {
+		compatible = "fsl,imx8qxp-gpmi-nand";
+		reg = <0x5b812000 0x2000>, <0x5b814000 0x2000>;
+		reg-names = "gpmi-nand", "bch";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "bch";
+		clocks = <&rawnand_0_lpcg IMX_LPCG_CLK_1>,
+			 <&rawnand_0_lpcg IMX_LPCG_CLK_4>,
+			 <&rawnand_0_lpcg IMX_LPCG_CLK_0>,
+			 <&rawnand_0_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "gpmi_io", "gpmi_apb",
+			      "gpmi_bch", "gpmi_bch_apb";
+		dmas = <&dma_apbh 0>;
+		dma-names = "rx-tx";
+		power-domains = <&pd IMX_SC_R_NAND>;
+		assigned-clocks = <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_MST_BUS>;
+		assigned-clock-rates = <50000000>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index b0bb77150adc..575be8115e42 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/dma/fsl-edma.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
 dma_ipg_clk: clock-dma-ipg {
@@ -27,12 +28,14 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi0_lpcg 0>,
-			 <&spi0_lpcg 1>;
+		clocks = <&spi0_lpcg IMX_LPCG_CLK_0>,
+			 <&spi0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
 		power-domains = <&pd IMX_SC_R_SPI_0>;
+		dmas = <&edma2 1 0 0>, <&edma2 0 0 FSL_EDMA_RX>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -43,12 +46,14 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi1_lpcg 0>,
-			 <&spi1_lpcg 1>;
+		clocks = <&spi1_lpcg IMX_LPCG_CLK_0>,
+			 <&spi1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
 		power-domains = <&pd IMX_SC_R_SPI_1>;
+		dmas = <&edma2 3 0 0>, <&edma2 2 0 FSL_EDMA_RX>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -59,12 +64,14 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi2_lpcg 0>,
-			 <&spi2_lpcg 1>;
+		clocks = <&spi2_lpcg IMX_LPCG_CLK_0>,
+			 <&spi2_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
 		power-domains = <&pd IMX_SC_R_SPI_2>;
+		dmas = <&edma2 5 0 0>, <&edma2 4 0 FSL_EDMA_RX>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -75,12 +82,14 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi3_lpcg 0>,
-			 <&spi3_lpcg 1>;
+		clocks = <&spi3_lpcg IMX_LPCG_CLK_0>,
+			 <&spi3_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
 		power-domains = <&pd IMX_SC_R_SPI_3>;
+		dmas = <&edma2 7 0 0>, <&edma2 6 0 FSL_EDMA_RX>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -93,8 +102,8 @@ dma_subsys: bus@5a000000 {
 		assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_0>;
-		dma-names = "tx","rx";
-		dmas = <&edma2 9 0 0>, <&edma2 8 0 1>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 8 0 FSL_EDMA_RX>, <&edma2 9 0 0>;
 		status = "disabled";
 	};
 
@@ -107,8 +116,8 @@ dma_subsys: bus@5a000000 {
 		assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_1>;
-		dma-names = "tx","rx";
-		dmas = <&edma2 11 0 0>, <&edma2 10 0 1>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 10 0 FSL_EDMA_RX>, <&edma2 11 0 0>;
 		status = "disabled";
 	};
 
@@ -121,8 +130,8 @@ dma_subsys: bus@5a000000 {
 		assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_2>;
-		dma-names = "tx","rx";
-		dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>;
 		status = "disabled";
 	};
 
@@ -135,8 +144,8 @@ dma_subsys: bus@5a000000 {
 		assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_3>;
-		dma-names = "tx","rx";
-		dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>;
 		status = "disabled";
 	};
 
@@ -144,8 +153,8 @@ dma_subsys: bus@5a000000 {
 		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
 		reg = <0x5a190000 0x1000>;
 		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&adma_pwm_lpcg 1>,
-			 <&adma_pwm_lpcg 0>;
+		clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&adma_pwm_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -192,29 +201,6 @@ dma_subsys: bus@5a000000 {
 				<&pd IMX_SC_R_DMA_2_CH15>;
 	};
 
-	edma3: dma-controller@5a9f0000 {
-		compatible = "fsl,imx8qm-edma";
-		reg = <0x5a9f0000 0x90000>;
-		#dma-cells = <3>;
-		dma-channels = <8>;
-		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
-				<&pd IMX_SC_R_DMA_3_CH1>,
-				<&pd IMX_SC_R_DMA_3_CH2>,
-				<&pd IMX_SC_R_DMA_3_CH3>,
-				<&pd IMX_SC_R_DMA_3_CH4>,
-				<&pd IMX_SC_R_DMA_3_CH5>,
-				<&pd IMX_SC_R_DMA_3_CH6>,
-				<&pd IMX_SC_R_DMA_3_CH7>;
-	};
-
 	spi0_lpcg: clock-controller@5a400000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5a400000 0x10000>;
@@ -325,6 +311,8 @@ dma_subsys: bus@5a000000 {
 
 	i2c0: i2c@5a800000 {
 		reg = <0x5a800000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>,
 			 <&i2c0_lpcg IMX_LPCG_CLK_4>;
@@ -337,6 +325,8 @@ dma_subsys: bus@5a000000 {
 
 	i2c1: i2c@5a810000 {
 		reg = <0x5a810000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>,
 			 <&i2c1_lpcg IMX_LPCG_CLK_4>;
@@ -349,6 +339,8 @@ dma_subsys: bus@5a000000 {
 
 	i2c2: i2c@5a820000 {
 		reg = <0x5a820000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>,
 			 <&i2c2_lpcg IMX_LPCG_CLK_4>;
@@ -361,6 +353,8 @@ dma_subsys: bus@5a000000 {
 
 	i2c3: i2c@5a830000 {
 		reg = <0x5a830000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>,
 			 <&i2c3_lpcg IMX_LPCG_CLK_4>;
@@ -377,14 +371,14 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a880000 0x10000>;
 		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc0_lpcg 0>,
-			 <&adc0_lpcg 1>;
+		clocks = <&adc0_lpcg IMX_LPCG_CLK_0>,
+			 <&adc0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		power-domains = <&pd IMX_SC_R_ADC_0>;
 		status = "disabled";
-	 };
+	};
 
 	adc1: adc@5a890000 {
 		compatible = "nxp,imx8qxp-adc";
@@ -392,8 +386,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a890000 0x10000>;
 		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc1_lpcg 0>,
-			 <&adc1_lpcg 1>;
+		clocks = <&adc1_lpcg IMX_LPCG_CLK_0>,
+			 <&adc1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -406,8 +400,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a8d0000 0x10000>;
 		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -427,8 +421,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN1 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -448,8 +442,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN2 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -460,6 +454,29 @@ dma_subsys: bus@5a000000 {
 		status = "disabled";
 	};
 
+	edma3: dma-controller@5a9f0000 {
+		compatible = "fsl,imx8qm-edma";
+		reg = <0x5a9f0000 0x90000>;
+		#dma-cells = <3>;
+		dma-channels = <8>;
+		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+				<&pd IMX_SC_R_DMA_3_CH1>,
+				<&pd IMX_SC_R_DMA_3_CH2>,
+				<&pd IMX_SC_R_DMA_3_CH3>,
+				<&pd IMX_SC_R_DMA_3_CH4>,
+				<&pd IMX_SC_R_DMA_3_CH5>,
+				<&pd IMX_SC_R_DMA_3_CH6>,
+				<&pd IMX_SC_R_DMA_3_CH7>;
+	};
+
 	i2c0_lpcg: clock-controller@5ac00000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5ac00000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-gpu0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-gpu0.dtsi
new file mode 100644
index 000000000000..9b8a44aa63d6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-gpu0.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+gpu0_subsys: bus@53000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x53000000 0x0 0x53000000 0x1000000>;
+
+	gpu_3d0: gpu@53100000 {
+		compatible = "vivante,gc";
+		reg = <0x53100000 0x40000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_MISC>;
+		clock-names = "core", "shader";
+		assigned-clocks = <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_PER>,
+				  <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_MISC>;
+		assigned-clock-rates = <700000000>, <850000000>;
+		power-domains = <&pd IMX_SC_R_GPU_0_PID0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
new file mode 100644
index 000000000000..469de8b536b5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *
+ * Richard Zhu <hongxing.zhu@nxp.com>
+ */
+#include <dt-bindings/phy/phy.h>
+
+hsio_axi_clk: clock-hsio-axi {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <400000000>;
+	clock-output-names = "hsio_axi_clk";
+};
+
+hsio_per_clk: clock-hsio-per {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <133333333>;
+	clock-output-names = "hsio_per_clk";
+};
+
+hsio_refa_clk: clock-hsio-refa {
+	compatible = "gpio-gate-clock";
+	clocks = <&xtal100m>;
+	#clock-cells = <0>;
+	enable-gpios = <&lsio_gpio4 27 GPIO_ACTIVE_LOW>;
+};
+
+hsio_refb_clk: clock-hsio-refb {
+	compatible = "gpio-gate-clock";
+	clocks = <&xtal100m>;
+	#clock-cells = <0>;
+	enable-gpios = <&lsio_gpio4 1 GPIO_ACTIVE_LOW>;
+};
+
+xtal100m: clock-xtal100m {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <100000000>;
+	clock-output-names = "xtal_100MHz";
+};
+
+hsio_subsys: bus@5f000000 {
+	compatible = "simple-bus";
+	ranges = <0x5f000000 0x0 0x5f000000 0x01000000>,
+		 <0x80000000 0x0 0x70000000 0x10000000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	dma-ranges = <0x80000000 0 0x80000000 0x80000000>;
+
+	pcieb: pcie@5f010000 {
+		compatible = "fsl,imx8q-pcie";
+		reg = <0x5f010000 0x10000>,
+		      <0x8ff00000 0x80000>;
+		reg-names = "dbi", "config";
+		ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
+			 <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
+		#interrupt-cells = <1>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi", "dma";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		clocks = <&pcieb_lpcg IMX_LPCG_CLK_6>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_4>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "dbi", "mstr", "slv";
+		bus-range = <0x00 0xff>;
+		device_type = "pci";
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		num-lanes = <1>;
+		num-viewport = <4>;
+		power-domains = <&pd IMX_SC_R_PCIE_B>;
+		fsl,max-link-speed = <3>;
+		status = "disabled";
+	};
+
+	pcieb_ep: pcie-ep@5f010000 {
+		compatible = "fsl,imx8q-pcie-ep";
+		reg = <0x5f010000 0x00010000>,
+		      <0x80000000 0x10000000>;
+		reg-names = "dbi", "addr_space";
+		num-lanes = <1>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "dma";
+		clocks = <&pcieb_lpcg IMX_LPCG_CLK_6>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_4>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "dbi", "mstr", "slv";
+		power-domains = <&pd IMX_SC_R_PCIE_B>;
+		fsl,max-link-speed = <3>;
+		num-ib-windows = <6>;
+		num-ob-windows = <6>;
+		status = "disabled";
+	};
+
+	pcieb_lpcg: clock-controller@5f060000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f060000 0x10000>;
+		clocks = <&hsio_axi_clk>, <&hsio_axi_clk>, <&hsio_axi_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>;
+		clock-output-names = "hsio_pcieb_mstr_axi_clk",
+				     "hsio_pcieb_slv_axi_clk",
+				     "hsio_pcieb_dbi_axi_clk";
+		power-domains = <&pd IMX_SC_R_PCIE_B>;
+	};
+
+	phyx1_crr1_lpcg: clock-controller@5f0b0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f0b0000 0x10000>;
+		clocks = <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_phyx1_per_clk";
+		power-domains = <&pd IMX_SC_R_SERDES_1>;
+	};
+
+	pcieb_crr3_lpcg: clock-controller@5f0d0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f0d0000 0x10000>;
+		clocks = <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_pcieb_per_clk";
+		power-domains = <&pd IMX_SC_R_PCIE_B>;
+	};
+
+	misc_crr5_lpcg: clock-controller@5f0f0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f0f0000 0x10000>;
+		clocks = <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_misc_per_clk";
+		power-domains = <&pd IMX_SC_R_HSIO_GPIO>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
index e7783cc2d830..2cf0f7208350 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
@@ -10,24 +10,274 @@ img_ipg_clk: clock-img-ipg {
 	clock-output-names = "img_ipg_clk";
 };
 
+img_pxl_clk: clock-img-pxl {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <600000000>;
+	clock-output-names = "img_pxl_clk";
+};
+
 img_subsys: bus@58000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x58000000 0x0 0x58000000 0x1000000>;
 
+	isi: isi@58100000 {
+		reg = <0x58100000 0x80000>;
+		interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma1_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma2_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma3_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma4_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma5_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma6_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma7_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "per0", "per1", "per2", "per3",
+			      "per4", "per5", "per6", "per7";
+		interrupt-parent = <&gic>;
+		power-domains = <&pd IMX_SC_R_ISI_CH0>,
+				<&pd IMX_SC_R_ISI_CH1>,
+				<&pd IMX_SC_R_ISI_CH2>,
+				<&pd IMX_SC_R_ISI_CH3>,
+				<&pd IMX_SC_R_ISI_CH4>,
+				<&pd IMX_SC_R_ISI_CH5>,
+				<&pd IMX_SC_R_ISI_CH6>,
+				<&pd IMX_SC_R_ISI_CH7>;
+		status = "disabled";
+	};
+
+	irqsteer_csi0: irqsteer@58220000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x58220000 0x1000>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&img_ipg_clk>;
+		clock-names = "ipg";
+		interrupt-parent = <&gic>;
+		power-domains = <&pd IMX_SC_R_CSI_0>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+		status = "disabled";
+	};
+
+	gpio0_mipi_csi0: gpio@58222000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x58222000 0x1000>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts = <0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&irqsteer_csi0>;
+		power-domains = <&pd IMX_SC_R_CSI_0>;
+	};
+
+	csi0_core_lpcg: clock-controller@58223018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58223018 0x4>;
+		clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_PER>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "csi0_lpcg_core_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	csi0_esc_lpcg: clock-controller@5822301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5822301c 0x4>;
+		clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_MISC>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "csi0_lpcg_esc_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	i2c_mipi_csi0: i2c@58226000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x58226000 0x1000>;
+		interrupts = <8>;
+		clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&img_ipg_clk>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		interrupt-parent = <&irqsteer_csi0>;
+		power-domains = <&pd IMX_SC_R_CSI_0_I2C_0>;
+		status = "disabled";
+	};
+
+	mipi_csi_0: csi@58227000 {
+		compatible = "fsl,imx8qxp-mipi-csi2";
+		reg = <0x58227000 0x1000>,
+		      <0x58221000 0x1000>;
+		clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>,
+			 <&csi0_esc_lpcg IMX_LPCG_CLK_4>,
+			 <&csi0_pxl_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "core", "esc", "ui";
+		assigned-clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>,
+				  <&csi0_esc_lpcg IMX_LPCG_CLK_4>;
+		assigned-clock-rates = <360000000>, <72000000>;
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+		resets = <&scu_reset IMX_SC_R_CSI_0>;
+		status = "disabled";
+	};
+
+	irqsteer_csi1: irqsteer@58240000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x58240000 0x1000>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&img_ipg_clk>;
+		clock-names = "ipg";
+		interrupt-parent = <&gic>;
+		power-domains = <&pd IMX_SC_R_CSI_1>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+		status = "disabled";
+	};
+
+	gpio0_mipi_csi1: gpio@58242000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x58242000 0x1000>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts = <0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&irqsteer_csi1>;
+		power-domains = <&pd IMX_SC_R_CSI_1>;
+	};
+
+	csi1_core_lpcg: clock-controller@58243018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58243018 0x4>;
+		clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_PER>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "csi1_lpcg_core_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	csi1_esc_lpcg: clock-controller@5824301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5824301c 0x4>;
+		clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_MISC>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "csi1_lpcg_esc_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	i2c_mipi_csi1: i2c@58246000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x58246000 0x1000>;
+		interrupts = <8>;
+		clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&img_ipg_clk>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		interrupt-parent = <&irqsteer_csi1>;
+		power-domains = <&pd IMX_SC_R_CSI_1_I2C_0>;
+		status = "disabled";
+	};
+
+	mipi_csi_1: csi@58247000 {
+		compatible = "fsl,imx8qxp-mipi-csi2";
+		reg = <0x58247000 0x1000>,
+		      <0x58241000 0x1000>;
+		clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>,
+			 <&csi1_esc_lpcg IMX_LPCG_CLK_4>,
+			 <&csi1_pxl_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "core", "esc", "ui";
+		assigned-clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>,
+				  <&csi1_esc_lpcg IMX_LPCG_CLK_4>;
+		assigned-clock-rates = <360000000>, <72000000>;
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+		resets = <&scu_reset IMX_SC_R_CSI_1>;
+		status = "disabled";
+	};
+
+	irqsteer_parallel: irqsteer@58260000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x58260000 0x1000>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_dummy>;
+		clock-names = "ipg";
+		interrupt-parent = <&gic>;
+		power-domains = <&pd IMX_SC_R_PI_0>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+		status = "disabled";
+	};
+
+	pi0_ipg_lpcg: clock-controller@58263004 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58263004 0x4>;
+		clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "pi0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	pi0_pxl_lpcg: clock-controller@58263018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58263018 0x4>;
+		clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pi0_lpcg_pxl_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	pi0_misc_lpcg: clock-controller@5826301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5826301c 0x4>;
+		clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_MISC0>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pi0_lpcg_misc_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	i2c0_parallel: i2c@58266000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x58266000 0x1000>;
+		interrupts = <8>;
+		clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&img_ipg_clk>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		interrupt-parent = <&irqsteer_parallel>;
+		power-domains = <&pd IMX_SC_R_PI_0_I2C_0>;
+		status = "disabled";
+	};
+
 	jpegdec: jpegdec@58400000 {
 		reg = <0x58400000 0x00050000>;
 		interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
 			 <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
-		clock-names = "per", "ipg";
 		assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
 				  <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
 		assigned-clock-rates = <200000000>, <200000000>;
 		power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
 				<&pd IMX_SC_R_MJPEG_DEC_S0>;
-		slot = <0>;
 	};
 
 	jpegenc: jpegenc@58450000 {
@@ -35,13 +285,121 @@ img_subsys: bus@58000000 {
 		interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
 			 <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
-		clock-names = "per", "ipg";
 		assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
 				  <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
 		assigned-clock-rates = <200000000>, <200000000>;
 		power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
 				<&pd IMX_SC_R_MJPEG_ENC_S0>;
-		slot = <0>;
+	};
+
+	pdma0_lpcg: clock-controller@58500000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58500000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	pdma1_lpcg: clock-controller@58510000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58510000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH1>;
+	};
+
+	pdma2_lpcg: clock-controller@58520000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58520000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma2_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH2>;
+	};
+
+	pdma3_lpcg: clock-controller@58530000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58530000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma3_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH3>;
+	};
+
+	pdma4_lpcg: clock-controller@58540000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58540000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma4_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH4>;
+	};
+
+	pdma5_lpcg: clock-controller@58550000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58550000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma5_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH5>;
+	};
+
+	pdma6_lpcg: clock-controller@58560000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58560000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma6_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH6>;
+	};
+
+	pdma7_lpcg: clock-controller@58570000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58570000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma7_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH7>;
+	};
+
+	csi0_pxl_lpcg: clock-controller@58580000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58580000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "csi0_lpcg_pxl_clk";
+		power-domains = <&pd IMX_SC_R_CSI_0>;
+	};
+
+	csi1_pxl_lpcg: clock-controller@58590000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58590000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "csi1_lpcg_pxl_clk";
+		power-domains = <&pd IMX_SC_R_CSI_1>;
+	};
+
+	hdmi_rx_pxl_link_lpcg: clock-controller@585a0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x585a0000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "hdmi_rx_lpcg_pxl_link_clk";
+		power-domains = <&pd IMX_SC_R_HDMI_RX>;
 	};
 
 	img_jpeg_dec_lpcg: clock-controller@585d0000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index 7e510b21bbac..764c1a08e3b1 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -25,8 +25,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d000000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm0_lpcg 4>,
-			 <&pwm0_lpcg 1>;
+		clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm0_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -38,8 +38,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d010000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm1_lpcg 4>,
-			 <&pwm1_lpcg 1>;
+		clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm1_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -51,8 +51,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d020000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm2_lpcg 4>,
-			 <&pwm2_lpcg 1>;
+		clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm2_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -64,8 +64,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d030000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm3_lpcg 4>,
-			 <&pwm3_lpcg 1>;
+		clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm3_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi
new file mode 100644
index 000000000000..dad0dc8fb431
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+lvds0_subsys: bus@56240000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x56240000 0x0 0x56240000 0x10000>;
+
+	qm_lvds0_lis_lpcg: qxp_mipi1_lis_lpcg: clock-controller@56243000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56243000 0x4>;
+		#clock-cells = <1>;
+		clock-output-names = "lvds0_lis_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1>;
+	};
+
+	qm_lvds0_pwm_lpcg: qxp_mipi1_pwm_lpcg: clock-controller@5624300c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5624300c 0x4>;
+		#clock-cells = <1>;
+		clock-output-names = "lvds0_pwm_lpcg_clk",
+				     "lvds0_pwm_lpcg_ipg_clk",
+				     "lvds0_pwm_lpcg_32k_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+	};
+
+	qm_lvds0_i2c0_lpcg: qxp_mipi1_i2c0_lpcg: clock-controller@56243010 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56243010 0x4>;
+		#clock-cells = <1>;
+		clock-output-names = "lvds0_i2c0_lpcg_clk",
+				     "lvds0_i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+	};
+
+	qm_pwm_lvds0: qxp_pwm_mipi_lvds1: pwm@56244000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x56244000 0x1000>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+		status = "disabled";
+	};
+
+	qm_i2c0_lvds0: qxp_i2c0_mipi_lvds1: i2c@56246000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x56246000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <8>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_MIPI_1_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi
new file mode 100644
index 000000000000..12ae4f48e1e1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+lvds1_subsys: bus@57240000 {
+	compatible = "simple-bus";
+	interrupt-parent = <&irqsteer_lvds1>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x57240000 0x0 0x57240000 0x10000>;
+
+	irqsteer_lvds1: interrupt-controller@57240000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x57240000 0x1000>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		clocks = <&lvds1_lis_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_LVDS_1>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	lvds1_lis_lpcg: clock-controller@57243000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57243000 0x4>;
+		#clock-cells = <1>;
+		clocks = <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds1_lis_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_1>;
+	};
+
+	lvds1_pwm_lpcg: clock-controller@5724300c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5724300c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LVDS_1_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds1_pwm_lpcg_clk",
+				     "lvds1_pwm_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_1_PWM_0>;
+	};
+
+	lvds1_i2c0_lpcg: clock-controller@57243010 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57243010 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds1_i2c0_lpcg_clk",
+				     "lvds1_i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+	};
+
+	lvds1_i2c1_lpcg: clock-controller@57243014 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57243014 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds1_i2c1_lpcg_clk",
+				     "lvds1_i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+	};
+
+	pwm_lvds1: pwm@57244000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x57244000 0x1000>;
+		clocks = <&lvds1_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&lvds1_pwm_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_LVDS_1_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_LVDS_1_PWM_0>;
+		status = "disabled";
+	};
+
+	i2c0_lvds1: i2c@57246000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x57246000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <8>;
+		clocks = <&lvds1_i2c0_lpcg IMX_LPCG_CLK_0>,
+			 <&lvds1_i2c0_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+		status = "disabled";
+	};
+
+	i2c1_lvds1: i2c@57247000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x57247000 0x1000>;
+		interrupts = <9>;
+		clocks = <&lvds1_i2c1_lpcg IMX_LPCG_CLK_0>,
+			 <&lvds1_i2c1_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi
new file mode 100644
index 000000000000..9c5b0cbdfcbd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+mipi0_subsys: bus@56220000 {
+	compatible = "simple-bus";
+	interrupt-parent = <&irqsteer_mipi0>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x56220000 0x0 0x56220000 0x10000>;
+
+	irqsteer_mipi0: interrupt-controller@56220000 {
+		compatible = "fsl,imx8qxp-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x56220000 0x1000>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		clocks = <&mipi0_lis_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_MIPI_0>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	mipi0_lis_lpcg: clock-controller@56223000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223000 0x4>;
+		#clock-cells = <1>;
+		power-domains = <&pd IMX_SC_R_MIPI_0>;
+	};
+
+	mipi0_pwm_lpcg: clock-controller@5622300c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5622300c 0x4>;
+		#clock-cells = <1>;
+		power-domains = <&pd IMX_SC_R_MIPI_0_PWM_0>;
+	};
+
+	mipi0_i2c0_lpcg_ipg_clk: clock-controller@56223014 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223014 0x4>;
+		#clock-cells = <1>;
+		clocks = <&mipi0_i2c0_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+	};
+
+	mipi0_i2c0_lpcg_ipg_s_clk: clock-controller@56223018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223018 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c0_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+	};
+
+	mipi0_i2c0_lpcg_clk: clock-controller@5622301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5622301c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_0_I2C_0 IMX_SC_PM_CLK_MISC2>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+	};
+
+	mipi0_i2c1_lpcg_ipg_clk: clock-controller@56223024 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223024 0x4>;
+		#clock-cells = <1>;
+		clocks = <&mipi0_i2c1_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>;
+	};
+
+	mipi0_i2c1_lpcg_ipg_s_clk: clock-controller@56223028 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223028 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c1_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>;
+	};
+
+	mipi0_i2c1_lpcg_clk: clock-controller@5622302c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5622302c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_0_I2C_1 IMX_SC_PM_CLK_MISC2>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>;
+	};
+
+	pwm_mipi0: pwm@56224000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x56224000 0x1000>;
+		clocks = <&mipi0_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&mipi0_pwm_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_MIPI_0_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_MIPI_0_PWM_0>;
+		status = "disabled";
+	};
+
+	i2c0_mipi0: i2c@56226000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x56226000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <8>;
+		clocks = <&mipi0_i2c0_lpcg_clk IMX_LPCG_CLK_0>,
+			 <&mipi0_i2c0_lpcg_ipg_clk IMX_LPCG_CLK_0>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&mipi0_i2c0_lpcg_clk IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi
new file mode 100644
index 000000000000..5b1f08e412b2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+mipi1_subsys: bus@57220000 {
+	compatible = "simple-bus";
+	interrupt-parent = <&irqsteer_mipi1>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x57220000 0x0 0x57220000 0x10000>;
+
+	irqsteer_mipi1: interrupt-controller@57220000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x57220000 0x1000>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		clocks = <&mipi1_lis_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_MIPI_1>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	mipi1_lis_lpcg: clock-controller@57223000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223000 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_lis_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1>;
+	};
+
+	mipi1_pwm_lpcg: clock-controller@5722300c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5722300c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "mipi1_pwm_lpcg_clk",
+				     "mipi1_pwm_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+	};
+
+	mipi1_i2c0_lpcg_clk: clock-controller@5722301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5722301c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_1_I2C_0 IMX_SC_PM_CLK_MISC2>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+	};
+
+	mipi1_i2c0_lpcg_ipg_clk: clock-controller@57223014 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223014 0x4>;
+		#clock-cells = <1>;
+		clocks = <&mipi1_i2c0_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+	};
+
+	mipi1_i2c0_lpcg_ipg_s_clk: clock-controller@57223018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223018 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c0_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+	};
+
+	mipi1_i2c1_lpcg_ipg_clk: clock-controller@57223024 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223024 0x4>;
+		#clock-cells = <1>;
+		clocks = <&mipi1_i2c1_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>;
+	};
+
+	mipi1_i2c1_lpcg_ipg_s_clk: clock-controller@57223028 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223028 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c1_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>;
+	};
+
+	mipi1_i2c1_lpcg_clk: clock-controller@5722302c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5722302c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_1_I2C_1 IMX_SC_PM_CLK_MISC2>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>;
+	};
+
+	pwm_mipi1: pwm@57224000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x57224000 0x1000>;
+		clocks = <&mipi1_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&mipi1_pwm_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+		status = "disabled";
+	};
+
+	i2c0_mipi1: i2c@57226000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x57226000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <8>;
+		interrupt-parent = <&irqsteer_mipi1>;
+		clocks = <&mipi1_i2c0_lpcg_clk IMX_LPCG_CLK_0>,
+			 <&mipi1_i2c0_lpcg_ipg_clk IMX_LPCG_CLK_0>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&mipi1_i2c0_lpcg_clk IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi
new file mode 100644
index 000000000000..3e04142aca5c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+security_subsys: bus@31400000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x31400000 0x0 0x31400000 0x90000>;
+
+	crypto: crypto@31400000 {
+		compatible = "fsl,imx8qm-caam", "fsl,sec-v4.0";
+		reg = <0x31400000 0x90000>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x31400000 0x90000>;
+		power-domains = <&pd IMX_SC_R_CAAM_JR2>;
+		fsl,sec-era = <9>;
+
+		sec_jr2: jr@30000 {
+			compatible = "fsl,imx8qm-job-ring", "fsl,sec-v4.0-job-ring";
+			reg = <0x30000 0x10000>;
+			interrupts = <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd IMX_SC_R_CAAM_JR2>;
+		};
+
+		sec_jr3: jr@40000 {
+			compatible = "fsl,imx8qm-job-ring", "fsl,sec-v4.0-job-ring";
+			reg = <0x40000 0x10000>;
+			interrupts = <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd IMX_SC_R_CAAM_JR3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
index c6540768bdb9..87211c18d65a 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
@@ -15,7 +15,7 @@ vpu: vpu@2c000000 {
 	mu_m0: mailbox@2d000000 {
 		compatible = "fsl,imx6sx-mu";
 		reg = <0x2d000000 0x20000>;
-		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
 		#mbox-cells = <2>;
 		power-domains = <&pd IMX_SC_R_VPU_MU_0>;
 		status = "disabled";
@@ -24,7 +24,7 @@ vpu: vpu@2c000000 {
 	mu1_m0: mailbox@2d020000 {
 		compatible = "fsl,imx6sx-mu";
 		reg = <0x2d020000 0x20000>;
-		interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
 		#mbox-cells = <2>;
 		power-domains = <&pd IMX_SC_R_VPU_MU_1>;
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/freescale/imx8dx-colibri-aster.dts b/arch/arm64/boot/dts/freescale/imx8dx-colibri-aster.dts
new file mode 100644
index 000000000000..c974f5dc0283
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dx-colibri-aster.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX on Aster Board";
+	compatible = "toradex,colibri-imx8x-aster",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8dx";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dx-colibri-eval-v3.dts b/arch/arm64/boot/dts/freescale/imx8dx-colibri-eval-v3.dts
new file mode 100644
index 000000000000..f2bf15463ae8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dx-colibri-eval-v3.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx8x-eval-v3",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8dx";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dx-colibri-iris-v2.dts b/arch/arm64/boot/dts/freescale/imx8dx-colibri-iris-v2.dts
new file mode 100644
index 000000000000..fd425c70cf2b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dx-colibri-iris-v2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX on Colibri Iris V2 Board";
+	compatible = "toradex,colibri-imx8x-iris-v2",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8dx";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dx-colibri-iris.dts b/arch/arm64/boot/dts/freescale/imx8dx-colibri-iris.dts
new file mode 100644
index 000000000000..e5e2346ce4f1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dx-colibri-iris.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX on Colibri Iris Board";
+	compatible = "toradex,colibri-imx8x-iris",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8dx";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dx-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8dx-colibri.dtsi
new file mode 100644
index 000000000000..4d1ad052c5b6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dx-colibri.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+#include "imx8dx.dtsi"
+#include "imx8x-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX Module";
+};
+
+&thermal_zones {
+	pmic-thermal {
+		cooling-maps {
+			map0 {
+				cooling-device = <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dx.dtsi b/arch/arm64/boot/dts/freescale/imx8dx.dtsi
new file mode 100644
index 000000000000..ce76efc1a041
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dx.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8dxp.dtsi"
+
+&gpu_3d0 {
+	assigned-clock-rates = <372000000>, <372000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index b972658efb17..25a77cac6f0b 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -16,12 +16,27 @@
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial6 = &cm40_lpuart;
 	};
 
 	chosen {
 		stdout-path = &lpuart0;
 	};
 
+	imx8dxl-cm4 {
+		compatible = "fsl,imx8qxp-cm4";
+		clocks = <&clk_dummy>;
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu5 0 1 &lsio_mu5 1 1 &lsio_mu5 3 1>;
+		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+				<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+		power-domains = <&pd IMX_SC_R_M4_0_PID0>, <&pd IMX_SC_R_M4_0_MU_1A>;
+		fsl,resource-id = <IMX_SC_R_M4_0_PID0>;
+		fsl,entry-address = <0x34fe0000>;
+	};
+
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0 0x40000000>;
@@ -49,6 +64,47 @@
 			alloc-ranges = <0 0x98000000 0 0x14000000>;
 			linux,cma-default;
 		};
+
+		vdev0vring0: memory0@90000000 {
+			reg = <0 0x90000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: memory@90008000 {
+			reg = <0 0x90008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: memory@90010000 {
+			reg = <0 0x90010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: memory@90018000 {
+			reg = <0 0x90018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: memory-rsc-table@900ff000 {
+			reg = <0 0x900ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: memory-vdevbuffer@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	m2_uart1_sel: regulator-m2uart1sel {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "m2_uart1_sel";
+		gpio = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
 	};
 
 	mux3_en: regulator-0 {
@@ -81,6 +137,24 @@
 		status = "disabled";
 	};
 
+	reg_can0_stby: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "can0-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_3 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can1_stby: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_3 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-3 {
 		compatible = "regulator-fixed";
 		regulator-name = "SD1_SPWR";
@@ -107,6 +181,112 @@
 		enable-active-high;
 		regulator-always-on;
 	};
+
+	reg_pcieb: regulator-pcieb {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "reg_pcieb";
+		gpio = <&pca6416_1 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	bt_sco_codec: audio-codec-bt {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai0>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-wm8960-1 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8960_1>;
+		audio-asrc = <&asrc0>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
+
+	sound-wm8960-2 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio-2";
+		audio-cpu = <&sai2>;
+		audio-codec = <&wm8960_2>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
+
+	sound-wm8960-3 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio-3";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8960_3>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
 };
 
 &adc0 {
@@ -114,6 +294,11 @@
 	status = "okay";
 };
 
+&asrc0 {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
+};
+
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
@@ -241,6 +426,93 @@
 			};
 		};
 
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			wm8960_1: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			wm8960_2: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			wm8960_3: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
 		i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -261,12 +533,107 @@
 	};
 };
 
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416_3: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&lsio_gpio2>;
+		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	pca9548_2: i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+	};
+};
+
 &lpuart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpuart0>;
 	status = "okay";
 };
 
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&lsio_mu5 {
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can0_stby>;
+	status = "okay";
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-x2-pcieb";
+	fsl,refclk-pad-mode = "output";
+	status = "okay";
+};
+
+&cm40_intmux {
+	status = "disabled";
+};
+
+&cm40_lpuart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cm40_lpuart>;
+	status = "disabled";
+};
+
 &lsio_gpio4 {
 	status = "okay";
 };
@@ -275,6 +642,73 @@
 	status = "okay";
 };
 
+&pcie0 {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcieb>;
+	status = "okay";
+};
+
+&pcie0_ep {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcieb>;
+	status = "disabled";
+};
+
+&sai0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai0>;
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&sai2 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai2_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai3_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
 &thermal_zones {
 	pmic-thermal {
 		polling-delay-passive = <250>;
@@ -365,12 +799,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpspi3>;
 	status = "okay";
-
-	spidev0: spi@0 {
-		reg = <0>;
-		compatible = "rohm,dh2228fv";
-		spi-max-frequency = <30000000>;
-	};
 };
 
 &iomuxc {
@@ -436,6 +864,20 @@
 		>;
 	};
 
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX8DXL_UART2_TX_ADMA_FLEXCAN1_TX	0x00000021
+			IMX8DXL_UART2_RX_ADMA_FLEXCAN1_RX	0x00000021
+		>;
+	};
+
+	pinctrl_flexcan3: flexcan3grp {
+		fsl,pins = <
+			IMX8DXL_FLEXCAN2_TX_ADMA_FLEXCAN2_TX	0x00000021
+			IMX8DXL_FLEXCAN2_RX_ADMA_FLEXCAN2_RX	0x00000021
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD		0x000014a0
@@ -494,6 +936,58 @@
 		>;
 	};
 
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			IMX8DXL_UART1_TX_ADMA_UART1_TX          0x06000020
+			IMX8DXL_UART1_RX_ADMA_UART1_RX          0x06000020
+			IMX8DXL_UART1_RTS_B_ADMA_UART1_RTS_B    0x06000020
+			IMX8DXL_UART1_CTS_B_ADMA_UART1_CTS_B    0x06000020
+		>;
+	};
+
+	pinctrl_pcieb: pcieagrp {
+		fsl,pins = <
+			IMX8DXL_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00	0x06000021
+			IMX8DXL_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x06000021
+			IMX8DXL_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02	0x04000021
+		>;
+	};
+
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <
+			IMX8DXL_SPI0_CS0_ADMA_SAI0_RXD		0x06000060
+			IMX8DXL_SPI0_CS1_ADMA_SAI0_RXC		0x06000040
+			IMX8DXL_SPI0_SCK_ADMA_SAI0_TXC		0x06000060
+			IMX8DXL_SPI0_SDI_ADMA_SAI0_TXD		0x06000060
+			IMX8DXL_SPI0_SDO_ADMA_SAI0_TXFS		0x06000040
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX8DXL_FLEXCAN0_RX_ADMA_SAI1_TXC	0x06000040
+			IMX8DXL_FLEXCAN0_TX_ADMA_SAI1_TXFS	0x06000040
+			IMX8DXL_FLEXCAN1_RX_ADMA_SAI1_TXD	0x06000060
+			IMX8DXL_FLEXCAN1_TX_ADMA_SAI1_RXD	0x06000060
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			IMX8DXL_SNVS_TAMPER_OUT3_ADMA_SAI2_RXC	0x06000040
+			IMX8DXL_SNVS_TAMPER_IN0_ADMA_SAI2_RXFS	0x06000040
+			IMX8DXL_SNVS_TAMPER_OUT4_ADMA_SAI2_RXD	0x06000060
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			IMX8DXL_SNVS_TAMPER_IN1_ADMA_SAI3_RXC	0x06000040
+			IMX8DXL_SNVS_TAMPER_IN3_ADMA_SAI3_RXFS	0x06000040
+			IMX8DXL_SNVS_TAMPER_IN2_ADMA_SAI3_RXD	0x06000060
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
index 0a477f6318f1..72434529f78e 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
@@ -3,6 +3,63 @@
  * Copyright 2019~2020, 2022 NXP
  */
 
+/delete-node/ &asrc1;
+/delete-node/ &asrc1_lpcg;
+/delete-node/ &adc1;
+/delete-node/ &adc1_lpcg;
+/delete-node/ &amix;
+/delete-node/ &amix_lpcg;
+/delete-node/ &edma1;
+/delete-node/ &esai0;
+/delete-node/ &esai0_lpcg;
+/delete-node/ &sai4;
+/delete-node/ &sai4_lpcg;
+/delete-node/ &sai5;
+/delete-node/ &sai5_lpcg;
+
+&acm {
+	compatible = "fsl,imx8dxl-acm";
+	power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+			<&pd IMX_SC_R_AUDIO_CLK_1>,
+			<&pd IMX_SC_R_MCLK_OUT_0>,
+			<&pd IMX_SC_R_MCLK_OUT_1>,
+			<&pd IMX_SC_R_AUDIO_PLL_0>,
+			<&pd IMX_SC_R_AUDIO_PLL_1>,
+			<&pd IMX_SC_R_ASRC_0>,
+			<&pd IMX_SC_R_SAI_0>,
+			<&pd IMX_SC_R_SAI_1>,
+			<&pd IMX_SC_R_SAI_2>,
+			<&pd IMX_SC_R_SAI_3>,
+			<&pd IMX_SC_R_SPDIF_0>,
+			<&pd IMX_SC_R_MQS_0>;
+	clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_ext_aud_mclk0>,
+		 <&clk_ext_aud_mclk1>,
+		 <&clk_spdif0_rx>,
+		 <&clk_sai0_rx_bclk>,
+		 <&clk_sai0_tx_bclk>,
+		 <&clk_sai1_rx_bclk>,
+		 <&clk_sai1_tx_bclk>,
+		 <&clk_sai2_rx_bclk>,
+		 <&clk_sai3_rx_bclk>;
+	clock-names = "aud_rec_clk0_lpcg_clk",
+		      "aud_rec_clk1_lpcg_clk",
+		      "aud_pll_div_clk0_lpcg_clk",
+		      "aud_pll_div_clk1_lpcg_clk",
+		      "ext_aud_mclk0",
+		      "ext_aud_mclk1",
+		      "spdif0_rx",
+		      "sai0_rx_bclk",
+		      "sai0_tx_bclk",
+		      "sai1_rx_bclk",
+		      "sai1_tx_bclk",
+		      "sai2_rx_bclk",
+		      "sai3_rx_bclk";
+};
+
 &audio_ipg_clk {
 	clock-frequency = <160000000>;
 };
@@ -15,6 +72,63 @@
 	interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&edma0 {
+	reg = <0x591f0000 0x1a0000>;
+	#dma-cells = <3>;
+	dma-channels = <25>;
+	dma-channel-mask = <0x1c0cc0>;
+	interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, /* asrc 0 */
+		<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* spdif0 */
+		<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, /* sai0 */
+		<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, /* sai1 */
+		<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* sai2 */
+		<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, /* sai3 */
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, /* gpt0 */
+		<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, /* gpt1 */
+		<GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, /* gpt2 */
+		<GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; /* gpt3 */
+	power-domains = <&pd IMX_SC_R_DMA_0_CH0>,
+			<&pd IMX_SC_R_DMA_0_CH1>,
+			<&pd IMX_SC_R_DMA_0_CH2>,
+			<&pd IMX_SC_R_DMA_0_CH3>,
+			<&pd IMX_SC_R_DMA_0_CH4>,
+			<&pd IMX_SC_R_DMA_0_CH5>,
+			<&pd IMX_SC_R_DMA_0_CH6>,
+			<&pd IMX_SC_R_DMA_0_CH7>,
+			<&pd IMX_SC_R_DMA_0_CH8>,
+			<&pd IMX_SC_R_DMA_0_CH9>,
+			<&pd IMX_SC_R_DMA_0_CH10>,
+			<&pd IMX_SC_R_DMA_0_CH11>,
+			<&pd IMX_SC_R_DMA_0_CH12>,
+			<&pd IMX_SC_R_DMA_0_CH13>,
+			<&pd IMX_SC_R_DMA_0_CH14>,
+			<&pd IMX_SC_R_DMA_0_CH15>,
+			<&pd IMX_SC_R_DMA_0_CH16>,
+			<&pd IMX_SC_R_DMA_0_CH17>,
+			<&pd IMX_SC_R_DMA_0_CH18>,
+			<&pd IMX_SC_R_DMA_0_CH19>,
+			<&pd IMX_SC_R_DMA_0_CH20>,
+			<&pd IMX_SC_R_DMA_0_CH21>,
+			<&pd IMX_SC_R_DMA_0_CH22>,
+			<&pd IMX_SC_R_DMA_0_CH23>,
+			<&pd IMX_SC_R_DMA_0_CH24>;
+};
+
 &edma2 {
 	interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
@@ -45,24 +159,44 @@
 		     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&flexcan1 {
+	interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&flexcan2 {
+	interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&flexcan3 {
+	interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &i2c0 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 1 0 0>, <&edma3 0 0 FSL_EDMA_RX>;
 };
 
 &i2c1 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 3 0 0>, <&edma3 2 0 FSL_EDMA_RX>;
 };
 
 &i2c2 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 5 0 0>, <&edma3 4 0 FSL_EDMA_RX>;
 };
 
 &i2c3 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 7 0 0>, <&edma3 6 0 FSL_EDMA_RX>;
 };
 
 &lpuart0 {
@@ -100,3 +234,24 @@
 &lpspi3 {
 	interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&sai0 {
+	interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sai1 {
+	interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sai2 {
+	interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sai3 {
+	interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spdif0 {
+	interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* rx */
+		     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; /* tx */
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
index a414df645351..a66ba6d0a8c0 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -5,6 +5,8 @@
 
 /delete-node/ &enet1_lpcg;
 /delete-node/ &fec2;
+/delete-node/ &usbotg3;
+/delete-node/ &usb3_phy;
 
 / {
 	conn_enet0_root_clk: clock-conn-enet0-root {
@@ -13,6 +15,13 @@
 		clock-frequency = <250000000>;
 		clock-output-names = "conn_enet0_root_clk";
 	};
+
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
 };
 
 &conn_subsys {
@@ -22,7 +31,7 @@
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "eth_wake_irq", "macirq";
+		interrupt-names = "macirq", "eth_wake_irq";
 		clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
 			 <&eqos_lpcg IMX_LPCG_CLK_6>,
 			 <&eqos_lpcg IMX_LPCG_CLK_0>,
@@ -53,13 +62,6 @@
 		rx-burst-size-dword = <0x10>;
 		power-domains = <&pd IMX_SC_R_USB_1>;
 		status = "disabled";
-
-		clk_dummy: clock-dummy {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "clk_dummy";
-		};
 	};
 
 	usbmisc2: usbmisc@5b0e0200 {
@@ -108,6 +110,13 @@
 
 };
 
+&dma_apbh {
+	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &enet0_lpcg {
 	clocks = <&conn_enet0_root_clk>,
 		 <&conn_enet0_root_clk>,
@@ -127,6 +136,14 @@
 	assigned-clock-rates = <125000000>;
 };
 
+&gpmi {
+	interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbphy1 {
+	compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
+};
+
 &usdhc1 {
 	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
 	interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
index 550f513708d8..3569abb5bb9b 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
@@ -4,6 +4,6 @@
  */
 
 &ddr_pmu0 {
-	compatible = "fsl,imx8-ddr-pmu";
+	compatible = "fsl,imx8dxl-ddr-pmu", "fsl,imx8-ddr-pmu";
 	interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
new file mode 100644
index 000000000000..ec466e4d7df5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ */
+
+&hsio_subsys {
+	phyx1_lpcg: clock-controller@5f090000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f090000 0x10000>;
+		clocks = <&hsio_refb_clk>, <&hsio_per_clk>,
+			 <&hsio_per_clk>, <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_phyx1_pclk",
+				     "hsio_phyx1_epcs_tx_clk",
+				     "hsio_phyx1_epcs_rx_clk",
+				     "hsio_phyx1_apb_clk";
+		power-domains = <&pd IMX_SC_R_SERDES_1>;
+	};
+
+	hsio_phy: phy@5f1a0000 {
+		compatible = "fsl,imx8qxp-hsio";
+		reg = <0x5f1a0000 0x10000>,
+		      <0x5f120000 0x10000>,
+		      <0x5f140000 0x10000>,
+		      <0x5f160000 0x10000>;
+		reg-names = "reg", "phy", "ctrl", "misc";
+		clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>,
+			 <&phyx1_lpcg IMX_LPCG_CLK_4>,
+			 <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
+			 <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
+			 <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr",
+			      "misc_crr";
+		#phy-cells = <3>;
+		power-domains = <&pd IMX_SC_R_SERDES_1>;
+		status = "disabled";
+	};
+
+	pcie0: pcie@5f010000 {
+		#interrupt-cells = <1>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 0x7>;
+	};
+
+	pcie0_ep: pcie-ep@5f010000 {
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "dma";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
index f580eb6db9a6..8d60827822ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -4,6 +4,8 @@
  */
 
 #include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/clock/imx8-lpcg.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -28,6 +30,10 @@
 		gpio6 = &lsio_gpio6;
 		gpio7 = &lsio_gpio7;
 		mu1 = &lsio_mu1;
+		spi0 = &lpspi0;
+		spi1 = &lpspi1;
+		spi2 = &lpspi2;
+		spi3 = &lpspi3;
 	};
 
 	cpus: cpus {
@@ -86,6 +92,7 @@
 		compatible = "arm,gic-v3";
 		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
 		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -103,7 +110,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a35-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -230,13 +237,27 @@
 	};
 
 	/* sorted in register address */
+	#include "imx8-ss-cm40.dtsi"
 	#include "imx8-ss-adma.dtsi"
 	#include "imx8-ss-conn.dtsi"
 	#include "imx8-ss-ddr.dtsi"
 	#include "imx8-ss-lsio.dtsi"
+	#include "imx8-ss-hsio.dtsi"
 };
 
 #include "imx8dxl-ss-adma.dtsi"
 #include "imx8dxl-ss-conn.dtsi"
 #include "imx8dxl-ss-lsio.dtsi"
 #include "imx8dxl-ss-ddr.dtsi"
+#include "imx8dxl-ss-hsio.dtsi"
+
+&cm40_intmux {
+	interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts
new file mode 100644
index 000000000000..f35514b7b338
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8dxp-tqma8xdp.dtsi"
+#include "mba8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDP on MBa8Xx";
+	compatible = "tq,imx8dxp-tqma8xdp-mba8xx", "tq,imx8dxp-tqma8xdp", "fsl,imx8dxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp.dtsi b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp.dtsi
new file mode 100644
index 000000000000..e2de8517aa0e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8dxp.dtsi"
+#include "tqma8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDP";
+	compatible = "tq,imx8dxp-tqma8xdp", "fsl,imx8dxp";
+};
+
+&pmic_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device =
+				<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps-mb-smarc-2.dts b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps-mb-smarc-2.dts
new file mode 100644
index 000000000000..331787df2fe4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps-mb-smarc-2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8dxp-tqma8xdps.dtsi"
+#include "tqma8xxs-mb-smarc-2.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDPS on MB-SMARC-2";
+	compatible = "tq,imx8dxp-tqma8xdps-mb-smarc-2", "tq,imx8dxp-tqma8xdps", "fsl,imx8dxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps.dtsi b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps.dtsi
new file mode 100644
index 000000000000..a97286fe7e0d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8dxp.dtsi"
+#include "tqma8xxs.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDPS";
+	compatible = "tq,imx8dxp-tqma8xdps", "fsl,imx8dxp";
+};
+
+&pmic0_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device =
+				<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp.dtsi b/arch/arm64/boot/dts/freescale/imx8dxp.dtsi
new file mode 100644
index 000000000000..a8f7352332c0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8qxp.dtsi"
+
+/delete-node/ &A35_2;
+/delete-node/ &A35_3;
+
+&thermal_zones {
+	cpu0-thermal {
+		cooling-maps {
+			map0 {
+				cooling-device =
+				<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index 6086dae2e5fb..ea1d5b9c6bae 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -56,6 +56,20 @@
 		enable-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_audio: regulator-audio {
 		compatible = "regulator-fixed";
 		regulator-name = "3v3_aud";
@@ -187,6 +201,8 @@
 		assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
 		assigned-clock-rates = <24000000>;
 		AVDD-supply = <&reg_camera>;  /* 2.8v */
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
 		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
index 905c98cb080d..734a75198f06 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
@@ -62,8 +62,8 @@
 		compatible = "adi,adv7535";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_hdmi_bridge>;
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>, <0x3e>, <0x3c>, <0x3f>;
+		reg-names = "main", "edid", "cec", "packet";
 		adi,dsi-lanes = <4>;
 		avdd-supply = <&reg_hdmi>;
 		a2vdd-supply = <&reg_hdmi>;
@@ -124,6 +124,7 @@
 	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index f264102bdb27..8287a7f66ed3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2020 Compass Electronics Group, LLC
  */
 
+#include "imx8mm-overdrive.dtsi"
+
 / {
 	aliases {
 		rtc0 = &rtc;
@@ -76,6 +78,9 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
@@ -231,6 +236,12 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		quartz-load-femtofarads = <12500>;
+		wakeup-source;
 	};
 };
 
@@ -267,7 +278,7 @@
 	mmc-pwrseq = <&usdhc1_pwrseq>;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		pinctrl-names = "default";
@@ -283,6 +294,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -312,6 +325,7 @@
 			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
 			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10             0x146
 			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
 		>;
 	};
@@ -347,6 +361,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x146
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
index b1f2beb40a98..472c584fb3bd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
@@ -168,7 +168,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
-	phy-handle = <&fec1_phy>;
+	phy-handle = <&fec1_phy_bcm>;
 	phy-supply = <&buck4_reg>;
 	fsl,magic-packet;
 	status = "okay";
@@ -178,7 +178,7 @@
 		#size-cells = <0>;
 
 		/* Atheros AR8031 PHY */
-		fec1_phy: ethernet-phy@0 {
+		fec1_phy_ath: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 			/*
@@ -191,6 +191,7 @@
 			reset-deassert-us = <10000>;
 			qca,keep-pll-enabled;
 			vddio-supply = <&vddio>;
+			status = "disabled";
 
 			vddio: vddio-regulator {
 				regulator-name = "VDDIO";
@@ -202,6 +203,20 @@
 				regulator-name = "VDDH";
 			};
 		};
+
+		/* Broadcom BCM54213PE PHY */
+		fec1_phy_bcm: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			/*
+			 * Dedicated ENET_INT# and ENET_WOL# signals are
+			 * unused, the PHY does not provide cable detect
+			 * interrupt.
+			 */
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
index d897a8527335..44c2cba41a1f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
@@ -104,7 +104,7 @@
 		compatible = "nxp,pca8574";
 		reg = <0x3a>;
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
index 1c4e4d175989..87fe3ebedb8d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
@@ -1,6 +1,9 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2023 Emtop Embedded Solutions
+ *
+ * Author: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
+ * Author: Tarang Raval <tarang.raval@siliconsignals.io>
  */
 
 /dts-v1/;
@@ -12,4 +15,384 @@
 	compatible = "ees,imx8mm-emtop-baseboard", "ees,imx8mm-emtop-som",
 		"fsl,imx8mm";
 
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			high_speed_ep: endpoint {
+				remote-endpoint = <&usb_hs_ep>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-1 {
+		        label = "buzzer";
+		        gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		        default-state = "off";
+		};
+	};
+
+	osc_can: clock-osc-can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "osc-can";
+	};
+
+	reg_audio: regulator-audio {
+	        compatible = "regulator-fixed";
+	        regulator-name = "wm8904_supply";
+	        regulator-min-microvolt = <1800000>;
+	        regulator-max-microvolt = <1800000>;
+	        regulator-always-on;
+	};
+
+	reg_wifi_vmmc: regulator-wifi-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <20000>;
+	};
+
+	sound-wm8904 {
+	        compatible = "simple-audio-card";
+	        simple-audio-card,bitclock-master = <&dailink_master>;
+	        simple-audio-card,format = "i2s";
+	        simple-audio-card,frame-master = <&dailink_master>;
+	        simple-audio-card,name = "wm8904-audio";
+	        simple-audio-card,mclk-fs = <256>;
+	        simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Headphone Jack", "MICBIAS",
+			"IN1L", "Headphone Jack";
+
+	        simple-audio-card,widgets =
+	                "Microphone","Headphone Jack",
+	                "Headphone", "Headphone Jack",
+	                "Line", "Line In Jack";
+
+	        dailink_master: simple-audio-card,codec {
+	                sound-dai = <&wm8904>;
+	        };
+
+	        simple-audio-card,cpu {
+	                sound-dai = <&sai3>;
+	        };
+	};
+
+	sound-spdif {
+	        compatible = "fsl,imx-audio-spdif";
+	        model = "imx-spdif";
+	        spdif-controller = <&spdif1>;
+	        spdif-out;
+	        spdif-in;
+	};
+};
+
+/* CAN BUS */
+&ecspi2 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_ecspi2>;
+        status = "okay";
+
+        can: can@0 {
+                compatible = "microchip,mcp2515";
+                reg = <0>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinctrl_canbus>;
+                clocks = <&osc_can>;
+                interrupt-parent = <&gpio1>;
+                interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+                spi-max-frequency = <10000000>;
+        };
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			vddio-supply = <&vddio>;
+
+			vddio: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+		clock-names = "mclk";
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8025";
+		reg = <0x32>;
+	};
+};
+
+/* AUDIO */
+&sai3 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_sai3>;
+        assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+        assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+        assigned-clock-rates = <24576000>;
+        status = "okay";
+};
+
+&spdif1 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_spdif1>;
+        assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
+        assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+        assigned-clock-rates = <24576000>;
+        clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
+                <&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
+                <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+                <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
+                <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+                <&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
+        clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
+                "rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", "pll8k", "pll11k";
+        status = "okay";
+};
+
+/* USBOTG */
+&usbotg1 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb_hs_ep: endpoint {
+			remote-endpoint = <&high_speed_ep>;
+		};
+	};
+};
+
+&usbotg2 {
+        dr_mode = "host";
+        status = "okay";
+};
+
+/* Wifi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wifi_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	non-removable;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+/* SD-card */
+&usdhc2 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_usdhc2>;
+        pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+        pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+        cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+        bus-width = <4>;
+        status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl_canbus: canbusgrp {
+	        fsl,pins = <
+		        MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14              0x14
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SS0_ECSPI2_SS0  		0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+		>;
+	};
+
+	pinctrl_usb_otg: usbotggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x140   /* otg_id */
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19    /* otg_vbus */
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC                 0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO               0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3           0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2           0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1           0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0           0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3           0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2           0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1           0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0           0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC           0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC           0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL     0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL     0x1f
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22                0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+	        fsl,pins = <
+	                MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL                  0x400001c3
+	                MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA                  0x400001c3
+	        >;
+	};
+
+	pinctrl_sai3: sai3grp {
+	        fsl,pins = <
+	                MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC             0xd6
+	                MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK              0xd6
+	                MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK                0xd6
+	                MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0             0xd6
+	                MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0             0xd6
+	        >;
+	};
+
+	pinctrl_spdif1: spdif1grp {
+	        fsl,pins = <
+	                MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT                0xd6
+	        >;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK                 0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD                 0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0             0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1             0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2             0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3             0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         	0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         	0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0     	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1     	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2     	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3     	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         	0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         	0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0     	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1     	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2     	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3     	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10             0x41    /* wl_reg_on */
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9                0x41    /* wl_host_wake */
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K      0x141   /* LP0: 32KHz */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+	        fsl,pins = <
+	                MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         	0x190
+	                MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         	0x1d0
+	                MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     	0x1d0
+	                MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     	0x1d0
+	                MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     	0x1d0
+	                MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     	0x1d0
+	        >;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+	        fsl,pins = <
+	                MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         	0x194
+	                MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         	0x1d4
+	                MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     	0x1d4
+	                MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     	0x1d4
+	                MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     	0x1d4
+	                MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     	0x1d4
+	        >;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+	        fsl,pins = <
+	                MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         	0x196
+	                MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         	0x1d6
+	                MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     	0x1d6
+	                MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     	0x1d6
+	                MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     	0x1d6
+	                MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     	0x1d6
+	        >;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index a882c86ec313..ff7ca2075230 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -72,6 +72,20 @@
 		enable-active-high;
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_vddext_3v3: regulator-vddext-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDEXT_3V3";
@@ -133,6 +147,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&cpudai>;
 		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,widgets =
 			"Line", "Left Line Out Jack",
 			"Line", "Right Line Out Jack";
@@ -144,13 +159,44 @@
 			sound-dai = <&sai3>;
 			dai-tdm-slot-num = <2>;
 			dai-tdm-slot-width = <32>;
+			system-clock-direction-out;
 		};
 
 		simple-audio-card,codec {
 			sound-dai = <&wm8524>;
-			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
 		};
 	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		audio-cpu = <&spdif1>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
+	};
 };
 
 &A53_0 {
@@ -359,20 +405,14 @@
 	};
 
 	ptn5110: tcpc@50 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec1>;
 		reg = <0x50>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <11 8>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
 		typec1_con: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -384,6 +424,12 @@
 				     PDO_VAR(5000, 20000, 3000)>;
 			op-sink-microwatt = <15000000>;
 			self-powered;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
 		};
 	};
 };
@@ -419,6 +465,9 @@
 		assigned-clock-rates = <24000000>;
 		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		DOVDD-supply = <&buck5_reg>;
+		AVDD-supply = <&reg_1v8>;
+		DVDD-supply = <&reg_1v5>;
 
 		port {
 			ov5640_to_mipi_csi2: endpoint {
@@ -434,6 +483,16 @@
 	status = "okay";
 };
 
+&micfil {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MM_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
 &mipi_csi {
 	status = "okay";
 
@@ -486,6 +545,19 @@
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "disabled";
+};
+
 &sai2 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
@@ -499,9 +571,17 @@
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
-	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
-	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
-	assigned-clock-rates = <24576000>;
+	assigned-clocks = <&clk IMX8MM_AUDIO_PLL1>,
+			  <&clk IMX8MM_AUDIO_PLL2>,
+			  <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <393216000>, <361267200>, <24576000>;
+	fsl,sai-mclk-direction-output;
+	clocks = <&clk IMX8MM_CLK_SAI3_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_SAI3_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+		<&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
 	status = "okay";
 };
 
@@ -509,6 +589,24 @@
 	status = "okay";
 };
 
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
+		 <&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
+		      "rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba",
+		      "pll8k", "pll11k";
+	status = "okay";
+};
+
 &uart2 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
@@ -636,6 +734,18 @@
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK        0xd6
+			MX8MM_IOMUXC_SAI5_RXC_PDM_CLK           0xd6
+			MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0        0xd6
+			MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1        0xd6
+			MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2        0xd6
+			MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3        0xd6
+		>;
+	};
+
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
@@ -666,6 +776,13 @@
 		>;
 	};
 
+	pinctrl_spdif1: spdif1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT	0xd6
+			MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN		0xd6
+		>;
+	};
+
 	pinctrl_typec1: typec1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts b/arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts
new file mode 100644
index 000000000000..370558a8ba46
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2020 CompuLab
+
+#include "imx8mm-ucm-som.dtsi"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+/ {
+	model = "CompuLab i.MX8MM IoT Gateway";
+	compatible = "compulab,imx8mm-iot-gateway", "compulab,imx8mm-ucm-som", "fsl,imx8mm";
+
+	regulator-usbhub-ena {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhub_ena";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-usbhub-rst {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhub_rst";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-uart1-mode {
+		compatible = "regulator-fixed";
+		regulator-name = "uart1_mode";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-uart1-duplex {
+		compatible = "regulator-fixed";
+		regulator-name = "uart1_duplex";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-uart1-shdn {
+		compatible = "regulator-fixed";
+		regulator-name = "uart1_shdn";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-uart1-trmen {
+		compatible = "regulator-fixed";
+		regulator-name = "uart1_trmen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 25 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	regulator-usdhc2-v {
+		compatible = "regulator-fixed";
+		regulator-name = "usdhc2_v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-mpcie2-rst {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie2_rst";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-mpcie2lora-dis {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie2lora_dis";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	pcie0_refclk: clock-pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dr_mode = "host";
+	usb-role-switch;
+	status = "okay";
+
+	usbhub@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb9514>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	mmc-ddr-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* mPCIe2 */
+			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21		0x140
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x140
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x40000
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x140
+		>;
+	};
+
+	pinctrl_usb9514: usb9514grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x140 /* USB_PS_EN */
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x140 /* HUB_RSTn */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso
new file mode 100644
index 000000000000..324004b0eca3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2025 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+	compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-user {
+			label = "user";
+			linux,code = <BTN_0>;
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led_lte>;
+
+		lte-led1-b {
+			label = "lte-led1-blue";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led1-g {
+			label = "lte-led1-green";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led1-r {
+			label = "lte-led1-red";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led2-b {
+			label = "lte-led2-blue";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led2-g {
+			label = "lte-led2-green";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led2-r {
+			label = "lte-led2-red";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ecspi3 {
+	status = "disabled";
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	tpm@2e {
+		compatible = "infineon,slb9673", "tcg,tpm-tis-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		reg = <0x2e>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "VDD_IO_REF", "TPM_PIRQ#",
+			  "TPM_RESET# ", "", "", "",
+			  "", "LTE_LED1_B", "LTE_LED1_G", "",
+			  "";
+
+	vdd-io-ref-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		line-name = "VDD_IO_REF";
+		output-high;
+	};
+
+	tpm-reset-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		line-name = "TPM_RESET#";
+		output-low;
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	gpio-line-names = "", "", "LTE_RESET", "",
+			  "", "", "", "",
+			  "", "", "", "LTE_PWRKEY",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "LTE_PWR_EN";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "LTE_LED2_G", "LTE_LED1_R",
+			  "LTE_LED2_R", "LTE_LED2_B";
+};
+
+&iomuxc {
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA04_GPIO3_IO10		0x19 /* VDD_IO_REF */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2		0x19 /* LTE_RESET */
+			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 		0x19 /* LTE_PWRKEY */
+			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20		0x19 /* LTE_PWR_EN */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12		0x19 /* Pushbutton */
+		>;
+	};
+
+	pinctrl_gpio_led_lte: gpioledltegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_GPIO3_IO17		0x19 /* LTE_LED1_B */
+			MX8MM_IOMUXC_NAND_WP_B_GPIO3_IO18		0x19 /* LTE_LED1_G */
+			MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23		0x19 /* LTE_LED1_R */
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19 /* LTE_LED2_B */
+			MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22		0x19 /* LTE_LED2_G */
+			MX8MM_IOMUXC_UART2_RXD_GPIO5_IO24		0x19 /* LTE_LED2_R */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000083 /* I2C_A_SCL */
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000083 /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA05_GPIO3_IO11		0x19 /* TPM_PIRQ# */
+			MX8MM_IOMUXC_NAND_DATA06_GPIO3_IO12		0x39 /* TPM_RESET# */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
index 8b16bd68576c..3a166cf0afcb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -25,23 +25,21 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_led>;
 
 		led1 {
 			label = "led1";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		led2 {
 			label = "led2";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
 		};
 
 		led3 {
 			label = "led3";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -50,26 +48,6 @@
 		pwms = <&pwm2 0 5000 0>;
 	};
 
-	reg_rst_eth2: regulator-rst-eth2 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_eth2>;
-		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-name = "rst-usb-eth2";
-	};
-
-	reg_usb1_vbus: regulator-usb1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
-		gpio = <&gpio3 25 GPIO_ACTIVE_LOW>;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-name = "usb1-vbus";
-	};
-
 	reg_vdd_5v: regulator-5v {
 		compatible = "regulator-fixed";
 		regulator-always-on;
@@ -80,9 +58,6 @@
 };
 
 &ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	can@0 {
@@ -91,7 +66,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_can>;
 		clocks = <&osc_can>;
-		interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>;
 		/*
 		 * Limit the SPI clock to 15 MHz to prevent issues
 		 * with corrupted data due to chip errata.
@@ -103,9 +78,6 @@
 };
 
 &ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeram@0 {
@@ -117,8 +89,8 @@
 
 &fec1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-connection-type = "rgmii-rxid";
+	pinctrl-0 = <&pinctrl_enet_rgmii>;
+	phy-connection-type = "rgmii-id";
 	phy-handle = <&ethphy>;
 	status = "okay";
 
@@ -127,55 +99,101 @@
 		#size-cells = <0>;
 
 		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-id4f51.e91b";
 			reg = <0>;
-			reset-assert-us = <1>;
-			reset-deassert-us = <15000>;
-			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
 
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_0      -> DIO1_OUT
+ *   GPIO_B_1      -> DIO2_OUT
+ */
 &gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1>;
-	gpio-line-names = "", "", "", "dio1-out", "", "", "dio1-in", "dio2-out",
-			  "dio2-in", "dio3-out", "dio3-in", "dio4-out", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "";
+	gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1",
+			  "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
+			  "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "DIO1_OUT",
+			  "DIO2_OUT", "USB_A_OC#", "CAM_MCK", "USB_B_OC#",
+			  "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3",
+			  "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1",
+			  "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)",
+			  "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)",
+			  "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0",
+			  "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2",
+			  "ETH_A_(R)(G)MII_RXD3";
 };
 
-&gpio5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio5>;
-	gpio-line-names = "", "", "dio4-in", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "";
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_2      -> DIO3_OUT
+ *   GPIO_B_3      -> DIO4_OUT
+ */
+&gpio3 {
+	gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5",
+			  "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1",
+			  "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4",
+			  "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "DIO3_OUT",
+			  "USB_B_EN", "DIO4_OUT", "PCIe_CLKREQ#", "PCIe_A_PERST#",
+			  "PCIe_WAKE#", "USB_A_EN";
 };
 
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_4      -> DIO1_IN
+ *   GPIO_B_5      -> DIO2_IN
+ *   GPIO_B_6      -> DIO3_IN
+ *   GPIO_B_7      -> DIO4_IN
+ */
+&gpio4 {
+	gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN",
+			  "DIO1_IN", "BOOT_SEL0#", "BOOT_SEL1#", "",
+			  "", "", "I2S_LRCLK", "I2S_BITCLK",
+			  "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "DIO2_IN", "DIO3_IN",
+			  "DIO4_IN", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6",
+			  "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS",
+			  "UART_A_RTS", "", "", "",
+			  "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX";
+};
+
+&i2c3 {
 	status = "okay";
+
+	usb-hub@2c {
+		compatible = "microchip,usb2514b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_hub>;
+		reg = <0x2c>;
+		non-removable-ports = <0>, <3>;
+		reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
 };
 
+&reg_usb2_vbus {
+	status = "disabled";
+};
+
+&reg_usdhc2_vcc {
+	status = "disabled";
+};
+
+&reg_usdhc3_vcc {
+	status = "disabled";
+};
+
 &uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
 	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
 	linux,rs485-enabled-at-boot-time;
 	uart-has-rtscts;
 	status = "okay";
@@ -183,8 +201,6 @@
 
 &usbotg1 {
 	dr_mode = "otg";
-	disable-over-current;
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 
@@ -195,14 +211,17 @@
 	#size-cells = <0>;
 	status = "okay";
 
+	/* VBUS is controlled by the hub */
+	/delete-property/ vbus-supply;
+
 	usb1@1 {
-		compatible = "usb424,9514";
+		compatible = "usb424,2514";
 		reg = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		usbnet: ethernet@1 {
-			compatible = "usb424,ec00";
+			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 		};
@@ -210,167 +229,20 @@
 };
 
 &usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
 	vmmc-supply = <&reg_vdd_3v3>;
-	vqmmc-supply = <&reg_nvcc_sd>;
-	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &iomuxc {
 	pinctrl_can: cangrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
-			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
-			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82
-			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82
-			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82
-			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
-			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
-			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
-			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
-			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
-			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
-			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
-			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
-			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
-			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
-			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
-			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
-			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
-			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19 /* PHY RST */
-			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19 /* ETH IRQ */
-		>;
-	};
-
-	pinctrl_gpio_led: gpioledgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19
-			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x19
-			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x19
-		>;
-	};
-
-	pinctrl_gpio1: gpio1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
-			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
-			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
-			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19
-			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
-			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
-		>;
-	};
-
-	pinctrl_gpio5: gpio5grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19
-		>;
-	};
-
-	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
-		>;
-	};
-
-	pinctrl_usb_eth2: usbeth2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19  /* SDIO_B_PWR_EN */
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+	pinctrl_usb_hub: usbhubgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19 /* SDIO_B_WP */
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
index dcec57c20399..e756fe5db56b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -25,6 +25,17 @@
 		clock-output-names = "osc-can";
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_in_conn: endpoint {
+				remote-endpoint = <&bridge_out_conn>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -132,6 +143,86 @@
 	};
 };
 
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+
+	dsi_mux_sel_hdmi: dsi-mux-sel-hdmi-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "dsi-mux-sel";
+	};
+
+	dsi_mux_sel_lvds: dsi-mux-sel-lvds-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "dsi-mux-sel";
+		status = "disabled";
+	};
+
+	dsi-mux-oe-hog {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "dsi-mux-oe";
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	lvds: bridge@2c {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2c>;
+		enable-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sn65dsi84>;
+		status = "disabled";
+	};
+
+	hdmi: hdmi@39 {
+		compatible = "adi,adv7535";
+		reg = <0x39>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7535>;
+		adi,dsi-lanes = <4>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		a2vdd-supply = <&reg_vdd_1v8>;
+		avdd-supply = <&reg_vdd_1v8>;
+		dvdd-supply = <&reg_vdd_1v8>;
+		pvdd-supply = <&reg_vdd_1v8>;
+		v1p2-supply = <&reg_vdd_1v8>;
+		v3p3-supply = <&reg_vdd_3v3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in_dsi_hdmi: endpoint {
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out_conn: endpoint {
+					remote-endpoint = <&hdmi_in_conn>;
+				};
+			};
+		};
+	};
+};
+
 &i2c4 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -144,12 +235,29 @@
 	};
 };
 
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <54000000>;
+	status = "okay";
+};
+
+&mipi_dsi_out {
+	remote-endpoint = <&bridge_in_dsi_hdmi>;
+};
+
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
 };
 
+&reg_nvcc_sd {
+	sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -160,8 +268,16 @@
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
+	/*
+	 * During bootup the CTS needs to stay LOW, which is only possible if this
+	 * pin is controlled by a GPIO. The UART IP always sets CTS to HIGH if not
+	 * running. So using 'uart-has-rtscts' is not a good choice here! There are
+	 * workarounds for this, but they introduce unnecessary complexity and are
+	 * therefore avoided here. For more information about this see:
+	 * https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=79d0224f6bf296d04cd843cfc49921b19c97bb09
+	 */
+	rts-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 	linux,rs485-enabled-at-boot-time;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -207,6 +323,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio>;
 
+	pinctrl_adv7535: adv7535grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x19
+		>;
+	};
+
 	pinctrl_can: cangrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
@@ -277,10 +399,24 @@
 		>;
 	};
 
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x19
+			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000083
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000083
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
 		>;
 	};
 
@@ -290,21 +426,28 @@
 		>;
 	};
 
+	pinctrl_sn65dsi84: sn65dsi84grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26		0x19
+			MX8MM_IOMUXC_SD2_WP_GPIO2_IO20			0x19
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29		0x19
 		>;
 	};
 
@@ -316,40 +459,40 @@
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000d0
 		>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000d0
 		>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000d0
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
new file mode 100644
index 000000000000..57d0739fcce3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+	compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <100>;
+	};
+
+	panel {
+		compatible = "jenson,bl-jt60050-01a", "panel-lvds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		backlight = <&backlight>;
+		data-mapping = "vesa-24";
+		enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		height-mm = <86>;
+		width-mm = <154>;
+
+		panel-timing {
+			clock-frequency = <51200000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hsync-len = <1>;
+			hfront-porch = <160>;
+			hback-porch = <160>;
+			vsync-len = <1>;
+			vfront-porch = <12>;
+			vback-porch = <23>;
+		};
+
+		port {
+			panel_out_bridge: endpoint {
+				remote-endpoint = <&bridge_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_mux_sel_hdmi {
+	status = "disabled";
+};
+
+&dsi_mux_sel_lvds {
+	status = "okay";
+};
+
+&mipi_dsi_out {
+	remote-endpoint = <&bridge_in_dsi_lvds>;
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+
+	panel-rst-hog {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "panel-reset";
+	};
+
+	panel-stby-hog {
+		gpio-hog;
+		gpios = <21 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "panel-standby";
+	};
+
+	panel-hinv-hog {
+		gpio-hog;
+		gpios = <24 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "panel-horizontal-invert";
+	};
+
+	panel-vinv-hog {
+		gpio-hog;
+		gpios = <25 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "panel-vertical-invert";
+	};
+};
+
+&hdmi {
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	gt911: touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 8>;
+		reset-gpios = <&gpio3 23 0>;
+		irq-gpios = <&gpio3 22 0>;
+	};
+
+	st1633: touchscreen@55 {
+		compatible = "sitronix,st1633";
+		reg = <0x55>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupts = <22 8>;
+		interrupt-parent = <&gpio3>;
+		gpios = <&gpio3 22 0>;
+		status = "disabled";
+	};
+};
+
+&lvds {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			bridge_in_dsi_lvds: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			bridge_out_panel: endpoint {
+				remote-endpoint = <&panel_out_bridge>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x19
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x19
+			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21		0x19
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000083
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000083
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x19
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT		0x6
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x19
+			MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x19
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index 6e75ab879bf5..96987910609f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -3,6 +3,7 @@
  * Copyright (C) 2022 Kontron Electronics GmbH
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "imx8mm.dtsi"
 
@@ -28,6 +29,73 @@
 	chosen {
 		stdout-path = &uart3;
 	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
+		enable-active-high;
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VBUS_USB_A";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_vbus>;
+		enable-active-high;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VBUS_USB_B";
+	};
+
+	reg_usdhc2_vcc: regulator-usdhc2-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>;
+		enable-active-high;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_A";
+	};
+
+	reg_usdhc3_vcc: regulator-usdhc3-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc3_vcc>;
+		enable-active-high;
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_B";
+	};
+
+	reg_vdd_carrier: regulator-vdd-carrier {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_CARRIER";
+
+		regulator-state-standby {
+			regulator-on-in-suspend;
+		};
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+
+		regulator-state-disk {
+			regulator-off-in-suspend;
+		};
+	};
 };
 
 &A53_0 {
@@ -96,6 +164,79 @@
 	};
 };
 
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_ecspi2_gpio>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1",
+			  "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
+			  "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "GPIO_B_0",
+			  "GPIO_B_1", "USB_A_OC#", "CAM_MCK", "USB_B_OC#",
+			  "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3",
+			  "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1",
+			  "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)",
+			  "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)",
+			  "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0",
+			  "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2",
+			  "ETH_A_(R)(G)MII_RXD3";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SDIO_A_CD#", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+			  "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN",
+			  "SDIO_A_WP";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+	gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5",
+			  "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1",
+			  "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4",
+			  "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "GPIO_B_2",
+			  "USB_B_EN", "GPIO_B_3", "PCIe_CLKREQ#", "PCIe_A_PERST#",
+			  "PCIe_WAKE#", "USB_A_EN";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN",
+			  "GPIO_B_4", "BOOT_SEL0#", "BOOT_SEL1#", "",
+			  "", "", "I2S_LRCLK", "I2S_BITCLK",
+			  "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "GPIO_B_5", "GPIO_B_6",
+			  "GPIO_B_7", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6",
+			  "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS",
+			  "UART_A_RTS", "", "", "",
+			  "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX";
+};
+
+&gpio5 {
+	gpio-line-names = "UART_B_TX", "SDIO_B_PWR_EN", "SDIO_B_WP", "PWM_2",
+			  "PWM_1", "PWM_0", "", "",
+			  "", "", "SPI_A_SCK", "SPI_A_SDO_(IO1)",
+			  "SPI_A_SCK", "SPI_A_CS0#", "", "",
+			  "I2C_A_SCL", "I2C_A_SDA", "I2C_B_SCL", "I2C_B_SDA",
+			  "PCIe_SMCLK", "PCIe_SMDAT", "SPI_B_SCK", "SPI_B_SDO",
+			  "SPI_B_SDI", "SPI_B_CS0#", "UART_CON_RX", "UART_CON_TX",
+			  "UART_C_RX", "UART_C_TX";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -201,26 +342,91 @@
 				regulator-name = "NVCC_SD (LDO5)";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
+				sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			};
 		};
 	};
 
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		address-width = <16>;
+		pagesize = <32>;
+		size = <8192>;
+	};
+
 	rv3028: rtc@52 {
 		compatible = "microcrystal,rv3028";
 		reg = <0x52>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc>;
-		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>;
-		trickle-diode-disable;
+		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
 &uart3 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 };
 
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	vbus-supply = <&reg_usb1_vbus>;
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2>;
+	vbus-supply = <&reg_usb2_vbus>;
+};
+
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -233,6 +439,26 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>;
+	vmmc-supply = <&reg_usdhc3_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+};
+
 &wdog1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog>;
@@ -241,6 +467,12 @@
 };
 
 &iomuxc {
+	pinctrl_csi_mck: csimckgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59 /* CAM_MCK */
+		>;
+	};
+
 	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
@@ -250,10 +482,140 @@
 		>;
 	};
 
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82 /* SPI_A_SDI_(IO0) */
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82 /* SPI_A_SDO_(IO1) */
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82 /* SPI_A_SCK */
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19 /* SPI_A_CS0# */
+		>;
+	};
+
+	pinctrl_ecspi2_gpio: ecspi2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x19 /* SPI_A_/WP_(IO2) */
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19 /* SPI_A_/HOLD_(IO3) */
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82 /* SPI_B_SDI */
+			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82 /* SPI_B_SDO */
+			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82 /* SPI_B_SCK */
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19 /* SPI_B_CS0# */
+		>;
+	};
+
+	pinctrl_enet_rgmii: enetrgmiigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03 /* ETH_MDC */
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03 /* ETH_MDIO */
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f /* ETH_A_(S)(R)(G)MII_TXD3 */
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f /* ETH_A_(S)(R)(G)MII_TXD2 */
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f /* ETH_A_(S)(R)(G)MII_TXD1 */
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f /* ETH_A_(S)(R)(G)MII_TXD0 */
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91 /* ETH_A_(R)(G)MII_RXD3 */
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91 /* ETH_A_(R)(G)MII_RXD2 */
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91 /* ETH_A_(S)(R)(G)MII_RXD1 */
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91 /* ETH_A_(S)(R)(G)MII_RXD0 */
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f /* ETH_A_(R)(G)MII_TX_CLK */
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91 /* ETH_A_(R)(G)MII_RX_CLK */
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_enet_rmii: enetrmiigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03 /* ETH_MDC */
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03 /* ETH_MDIO */
+			MX8MM_IOMUXC_ENET_TD2_ENET1_TX_CLK		0x4000001f /* ETH_A_(S)(R)(G)MII_TXD2 */
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x56 /* ETH_A_(S)(R)(G)MII_TXD1 */
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x56 /* ETH_A_(S)(R)(G)MII_TXD0 */
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x56 /* ETH_A_(S)(R)(G)MII_RXD1 */
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x56 /* ETH_A_(S)(R)(G)MII_RXD0 */
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RX_ER		0x56 /* ETH_A_(R)(G)MII_RX_CLK */
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x56 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x56 /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19 /* GPIO_A_0 */
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19 /* GPIO_A_1 */
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19 /* GPIO_A_2 */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19 /* GPIO_A_3 */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19 /* GPIO_A_4 */
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19 /* GPIO_A_5 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19 /* GPIO_A_6 */
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* GPIO_A_7 */
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* GPIO_B_0 */
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19 /* GPIO_B_1 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x19 /* GPIO_C_5 */
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x19 /* GPIO_C_4 */
+			MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6		0x19 /* GPIO_C_0 */
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7		0x19 /* GPIO_C_1 */
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8		0x19 /* GPIO_C_2 */
+			MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9		0x19 /* GPIO_C_3 */
+			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x19 /* GPIO_B_2 */
+			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21		0x19 /* GPIO_B_3 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x19 /* GPIO_C_7 */
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x19 /* GPIO_B_4 */
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x19 /* BOOT_SEL0# */
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x19 /* BOOT_SEL1# */
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x19 /* GPIO_B_5 */
+			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x19 /* GPIO_B_6 */
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x19 /* GPIO_B_7 */
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19 /* GPIO_C_6 */
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000083 /* I2C_A_SCL */
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000083 /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000083 /* I2C_B_SCL */
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000083 /* I2C_B_SDA */
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083 /* PCIe_SMCLK and I2C_CAM_SCL/CSI_TX_P */
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083 /* PCIe_SMDAT and I2C_CAM_SDA/CSI_TX_N */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x19 /* PCIe_CLKREQ# */
+			MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x19 /* PCIe_A_PERST# */
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x19 /* PCIe_WAKE# */
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19 /* PCIe_SM_ALERT */
 		>;
 	};
 
@@ -263,16 +625,113 @@
 		>;
 	};
 
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT		0x19 /* PWM_0 */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19 /* PWM_1 */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT			0x19 /* PWM_2 */
+		>;
+	};
+
+	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19 /* USB_A_EN */
+		>;
+	};
+
+	pinctrl_reg_usb2_vbus: regusb2vbusgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x19 /* USB_B_EN */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x19 /* SDIO_A_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_usdhc3_vcc: regusdhc3vccgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19 /* SDIO_B_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_vdd_carrier: regvddcarriergrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19 /* CARRIER_PWR_EN */
+		>;
+	};
+
 	pinctrl_rtc: rtcgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19
 		>;
 	};
 
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0		0xd6 /* I2S_A_DATA_IN */
+			MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0		0xd6 /* I2S_A_DATA_OUT */
+			MX8MM_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1		0xd6 /* I2S_B_DATA_IN */
+			MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1		0xd6 /* I2S_B_DATA_OUT */
+			MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK		0xd6 /* I2S_MCLK */
+			MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC		0xd6 /* I2S_LRCLK */
+			MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK		0xd6 /* I2S_BITCLK */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0 /* UART_A_RX */
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0 /* UART_A_TX */
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0 /* UART_A_CTS */
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0 /* UART_A_RTS */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0 /* UART_B_RX */
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0 /* UART_B_TX */
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0 /* UART_B_CTS */
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0 /* UART_B_RTS */
+		>;
+	};
+
 	pinctrl_uart3: uart3grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
-			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140 /* UART_CON_RX */
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140 /* UART_CON_TX */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x0 /* UART_C_RX */
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x0 /* UART_C_TX */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x19 /* USB_A_OC# */
+		>;
+	};
+
+	pinctrl_usb2: usb2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC		0x19 /* USB_B_OC# */
 		>;
 	};
 
@@ -327,6 +786,103 @@
 		>;
 	};
 
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90 /* SDIO_A_CLK */
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0 /* SDIO_A_CMD */
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0 /* SDIO_A_D0 */
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0 /* SDIO_A_D1 */
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0 /* SDIO_A_D2 */
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0 /* SDIO_A_D3 */
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000090
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94 /* SDIO_A_CLK */
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4 /* SDIO_A_CMD */
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4 /* SDIO_A_D0 */
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4 /* SDIO_A_D1 */
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4 /* SDIO_A_D2 */
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4 /* SDIO_A_D3 */
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000090
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96 /* SDIO_A_CLK */
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6 /* SDIO_A_CMD */
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6 /* SDIO_A_D0 */
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6 /* SDIO_A_D1 */
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6 /* SDIO_A_D2 */
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6 /* SDIO_A_D3 */
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000090
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19 /* SDIO_A_CD# */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x90 /* SDIO_B_CLK */
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x90 /* SDIO_B_CMD */
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x90 /* SDIO_B_D0 */
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x90 /* SDIO_B_D1 */
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x90 /* SDIO_B_D2 */
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x90 /* SDIO_B_D3 */
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x90 /* SDIO_B_D4 */
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x90 /* SDIO_B_D5 */
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x90 /* SDIO_B_D6 */
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x90 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x94 /* SDIO_B_CLK */
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x94 /* SDIO_B_CMD */
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x94 /* SDIO_B_D0 */
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x94 /* SDIO_B_D1 */
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x94 /* SDIO_B_D2 */
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x94 /* SDIO_B_D3 */
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x94 /* SDIO_B_D4 */
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x94 /* SDIO_B_D5 */
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x94 /* SDIO_B_D6 */
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x94 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x96 /* SDIO_B_CLK */
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x96 /* SDIO_B_CMD */
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x96 /* SDIO_B_D0 */
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x96 /* SDIO_B_D1 */
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x96 /* SDIO_B_D2 */
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x96 /* SDIO_B_D3 */
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x96 /* SDIO_B_D4 */
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x96 /* SDIO_B_D5 */
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x96 /* SDIO_B_D6 */
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x96 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_gpio: usdhc3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19 /* SDIO_B_CD# */
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19 /* SDIO_B_WP */
+		>;
+	};
+
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
index 1f8326613ee9..2076148e0862 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
@@ -237,8 +237,8 @@
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 0e8f0d7161ad..12fb79d20b29 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -220,7 +220,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c3@0 {
+		i2c@0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi
new file mode 100644
index 000000000000..b31436b5e9b7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu_2d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&gpu_3d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&vpu_blk_ctrl {
+	assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+			  <&clk IMX8MM_CLK_VPU_G2>,
+			  <&clk IMX8MM_CLK_VPU_H1>,
+			  <&clk IMX8MM_VPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
+				 <&clk IMX8MM_VPU_PLL_OUT>,
+				 <&clk IMX8MM_SYS_PLL3_OUT>;
+	assigned-clock-rates = <750000000>,
+			       <700000000>,
+			       <750000000>,
+			       <700000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
index 75bbedc6164c..a134b1833649 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
@@ -82,7 +82,7 @@
 	};
 
 	panel {
-		compatible = "panel-lvds";
+		compatible = "auo,g084sn05", "panel-lvds";
 		width-mm = <170>;
 		height-mm = <28>;
 		data-mapping = "jeida-18";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
new file mode 100644
index 000000000000..79e4c3710ac3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+		default-brightness-level = <6>;
+		pwms = <&pwm4 0 50000 0>;
+		power-supply = <&reg_vdd_3v3_s>;
+		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+	};
+
+	panel {
+		compatible = "edt,etml1010g3dra";
+		backlight = <&backlight>;
+		power-supply = <&reg_vcc_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	reg_sound_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8_Audio";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_sound_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_Analog";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound-peb-av-10 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "snd-peb-av-10";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <32>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Speaker", "Speaker",
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"Headphone Jack", "HPLOUT",
+			"Headphone Jack", "HPROUT",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In",
+			"MIC3R", "Microphone Jack",
+			"Microphone Jack", "Mic Bias";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clk IMX8MM_CLK_SAI5>;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	codec: codec@18 {
+		compatible = "ti,tlv320aic3007";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tlv320>;
+		#sound-dai-cells = <0>;
+		reg = <0x18>;
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+		ai3x-gpio-func = <0xd 0x0>;
+		ai3x-micbias-vg = <2>;
+		AVDD-supply = <&reg_sound_3v3>;
+		IOVDD-supply = <&reg_sound_3v3>;
+		DRVDD-supply = <&reg_sound_3v3>;
+		DVDD-supply = <&reg_sound_1v8>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x57>;
+		vcc-supply = <&reg_vdd_3v3_s>;
+	};
+
+	eeprom@5f {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x5f>;
+		size = <32>;
+		vcc-supply = <&reg_vdd_3v3_s>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai5 {
+	assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	assigned-clock-rates = <11289600>;
+	clocks = <&clk IMX8MM_CLK_SAI5_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_SAI5_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+		<&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k",
+			"pll11k";
+	fsl,sai-mclk-direction-output;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&sn65dsi83 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			bridge_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+			bridge_out: endpoint {
+				remote-endpoint = <&panel_in>;
+				ti,lvds-vod-swing-clock-microvolt = <200000 600000>;
+				ti,lvds-vod-swing-data-microvolt = <200000 600000>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL          0x400001c2
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA          0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18        0x1e2
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19        0x1e2
+		>;
+	};
+	pinctrl_lcd: lcd0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1		0x12
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT		0x12
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK        0xd6
+			MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0    0xd6
+			MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK     0xd6
+			MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0    0xd6
+		>;
+	};
+
+	pinctrl_tlv320: tlv320grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28       0x16
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20        0x16
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso
new file mode 100644
index 000000000000..a28f51ece93b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Janine Hagemann <j.hagemann@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		button-0 {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+
+		user-led1 {
+			gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led2 {
+			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led3 {
+			gpios = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17	0x16
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x16
+		>;
+	};
+
+	pinctrl_user_leds: user_ledsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15	0x16
+			MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28	0x16
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14	0x16
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
index 92e62fe31929..be470cfb03d7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
@@ -219,8 +219,15 @@
 	status = "okay";
 };
 
+/* RTC */
 &rv3028 {
+	interrupt-parent = <&gpio1>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-0 = <&pinctrl_rtc>;
+	pinctrl-names = "default";
+	aux-voltage-chargeable = <1>;
 	trickle-resistor-ohms = <3000>;
+	wakeup-source;
 };
 
 &snvs_pwrkey {
@@ -254,11 +261,12 @@
 		device-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 		interrupt-names = "host-wakeup";
 		interrupt-parent = <&gpio2>;
-		interrupts = <9 IRQ_TYPE_EDGE_BOTH>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		max-speed = <2000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_bt>;
 		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&reg_vcc_3v3>;
 		vddio-supply = <&reg_vcc_3v3>;
 	};
 };
@@ -331,7 +339,7 @@
 		fsl,pins = <
 			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x00
 			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x00
-			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x00
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x140
 		>;
 	};
 
@@ -407,6 +415,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c0
+		>;
+	};
+
 	pinctrl_tpm: tpmgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11      0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-eth.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-eth.dtso
new file mode 100644
index 000000000000..0fb4b6da6c10
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-eth.dtso
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&ethphy0 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-spiflash.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-spiflash.dtso
new file mode 100644
index 000000000000..7bfc366c1689
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-spiflash.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&flexspi {
+	status = "disabled";
+};
+
+&som_flash {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-rpmsg.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phycore-rpmsg.dtso
new file mode 100644
index 000000000000..43d5905f3d72
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-rpmsg.dtso
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Dominik Haller <d.haller@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+
+&{/} {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		m4_reserved: m4@80000000 {
+			reg = <0 0x80000000 0 0x1000000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@b8000000 {
+			reg = <0 0xb8000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@b8008000 {
+			reg = <0 0xb8008000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc_table@b80ff000 {
+			reg = <0 0xb80ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@b8400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xb8400000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	core-m4 {
+		compatible = "fsl,imx8mm-cm4";
+		clocks = <&clk IMX8MM_CLK_M4_DIV>;
+		mboxes = <&mu 0 1
+			&mu 1 1
+			&mu 3 1>;
+		mbox-names = "tx", "rx", "rxdb";
+		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, <&rsc_table>;
+		syscon = <&src>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
index 6069678244f3..921a7f58fd41 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
@@ -69,7 +69,6 @@
 
 /* Ethernet */
 &fec1 {
-	fsl,magic-packet;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	pinctrl-names = "default";
@@ -161,11 +160,13 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-max-microvolt = <2500000>;
-				regulator-min-microvolt = <1500000>;
+				regulator-min-microvolt = <2500000>;
 				regulator-name = "VCC_ENET_2V5 (LDO3)";
 
 				regulator-state-mem {
-					regulator-off-in-suspend;
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <2500000>;
+					regulator-suspend-min-microvolt = <2500000>;
 				};
 			};
 
@@ -285,9 +286,11 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sn65dsi83>;
 		reg = <0x2d>;
+		vcc-supply = <&reg_vdd_1v8>;
 		status = "disabled";
 	};
 
+	/* EEPROM */
 	eeprom@51 {
 		compatible = "atmel,24c32";
 		pagesize = <32>;
@@ -295,17 +298,14 @@
 		vcc-supply = <&reg_vdd_3v3_s>;
 	};
 
+	/* RTC */
 	rv3028: rtc@52 {
 		compatible = "microcrystal,rv3028";
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
 		reg = <0x52>;
 	};
 };
 
-/* EMMC */
+/* eMMC */
 &usdhc3 {
 	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
 	assigned-clock-rates = <400000000>;
@@ -340,10 +340,10 @@
 			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90
 			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x16
 			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x16
-			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x16
-			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x16
-			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x16
-			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x16
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x12
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x12
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x12
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x12
 			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x10
 		>;
 	};
@@ -373,12 +373,6 @@
 		>;
 	};
 
-	pinctrl_rtc: rtcgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c0
-		>;
-	};
-
 	pinctrl_sn65dsi83: sn65dsi83grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x0
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
new file mode 100644
index 000000000000..78f4e8d5814d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Jens Lang <j.lang@phytec.de>
+ *
+ * Tauri-L 2 x RS232:
+ *  - GPIO3_20 uart4_rs485_en needs to be driven low (inactive)
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	uart4-rs485-en-hog {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "uart4_rs485_en";
+	};
+};
+
+/* UART2 - RS232  */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+/* UART4 - RS232  */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio3_hog: gpio3hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x00
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x00
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x49
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x49
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
new file mode 100644
index 000000000000..66288948bdd3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Jens Lang <j.lang@phytec.de>
+ *
+ * Tauri-L RS232 + RS485:
+ *  - GPIO3_20 uart4_rs485_en needs to be driven high (active)
+ *  - GPIO3_25 RS485_DE Driver enable
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	uart4-rs485-en-hog {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "uart4_rs485_en";
+	};
+};
+
+/* UART2 - RS232  */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+/* UART4 - RS485  */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	rts-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio3_hog: gpio3hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x00
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x00
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x49
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x49
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x49
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso
new file mode 100644
index 000000000000..4719f5fbad03
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Author: Jens Lang <j.lang@phytec.de>
+ *
+ * Tauri-L RS232 with RTS/CTS hardware flow control:
+ *  - UART4_TX becomes RTS
+ *  - UART4_RX becomes CTS
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x00
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x00
+			MX8MM_IOMUXC_UART4_RXD_UART2_DCE_CTS_B	0x00
+			MX8MM_IOMUXC_UART4_TXD_UART2_DCE_RTS_B	0x00
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
index 968f475b9a96..755cf9cacd22 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mm-phycore-som.dtsi"
 
 / {
@@ -120,7 +121,7 @@
 	};
 
 	tpm: tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
 		pinctrl-names = "default";
@@ -185,6 +186,15 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	status = "okay";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
@@ -205,7 +215,13 @@
 
 /* RTC */
 &rv3028 {
+	interrupt-parent = <&gpio1>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-0 = <&pinctrl_rtc>;
+	pinctrl-names = "default";
+	aux-voltage-chargeable = <1>;
 	trickle-resistor-ohms = <3000>;
+	wakeup-source;
 };
 
 &uart1 {
@@ -383,6 +399,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c0
+		>;
+	};
+
 	pinctrl_tempsense: tempsensegrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31	0x00
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
index 156d793a0c97..b941c8c4f7bb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -5,12 +5,15 @@
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
 #include "imx8mm-tqma8mqml.dtsi"
 #include "mba8mx.dtsi"
 
 / {
 	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";
 	compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
@@ -72,20 +75,29 @@
 	};
 };
 
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <20000000>;
+};
+
 &pcie_phy {
-	clocks = <&pcie0_refclk>;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcieclk 2>;
+	clock-names = "ref";
 	status = "okay";
 };
 
+/* PCIe slot on X36 */
 &pcie0 {
 	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcieclk 3>,
 		 <&clk IMX8MM_CLK_PCIE1_AUX>;
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
-				<&clk IMX8MM_CLK_PCIE1_CTRL>;
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
 	assigned-clock-rates = <10000000>, <250000000>;
 	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
-				<&clk IMX8MM_SYS_PLL2_250M>;
+				 <&clk IMX8MM_SYS_PLL2_250M>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
index 8c0c6e715924..b82e9790ea20 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
@@ -62,11 +62,16 @@
 	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <84000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5_reg>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
@@ -79,7 +84,6 @@
 };
 
 &i2c1 {
-	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi
new file mode 100644
index 000000000000..d3b21203c5f4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi
@@ -0,0 +1,679 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2018 CompuLab
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		mmc0 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 3000000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <222>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		heartbeat-led {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	wlreg_on: regulator-wlreg-on {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "wlreg_on";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	regulator-usdhc3rst {
+		compatible = "regulator-fixed";
+		regulator-name = "usdhc3_rst";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	regulator-fec1rst {
+		compatible = "regulator-fixed";
+		regulator-name = "fec1_rst";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		enable-active-high;
+		startup-delay-us = <500>;
+		regulator-boot-on;
+	};
+};
+
+&A53_0 {
+	arm-supply = <&buck2>;
+};
+
+&cpu_alert0 {
+	temperature = <105000>;
+};
+
+&cpu_crit0 {
+	temperature = <115000>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@4b {
+		reg = <0x4b>;
+		compatible = "rohm,bd71837";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		#clock-cells = <0>;
+		clocks = <&pmic_osc>;
+		clock-names = "osc";
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck8: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	rtc_i2c: rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_backlight>;
+	status = "okay";
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <49152000>;
+	clocks = <&clk IMX8MM_CLK_SAI2_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_SAI2_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+		<&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&snvs {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "disabled";
+};
+
+&uart3 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 { /* bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "disabled";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt>;
+		max-speed = <3000000>;
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	hnp-disable;
+	srp-disable;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	bus-width = <4>;
+	non-removable;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x190
+		>;
+	};
+
+	pinctrl_bt: bt0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6		0x19 /* BT_REG_ON */
+			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7		0x19 /* BT_DEV_WU */
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8		0x19 /* BT_HST_WU */
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x41
+		>;
+	};
+
+	pinctrl_pwm_backlight: pwmbacklightgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_PWM2_OUT		0x03
+		>;
+	};
+
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK		0xd6
+			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6
+			MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC		0xd6
+			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6
+			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0		0xd6
+			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0		0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX		0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX		0x140
+			MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B		0x140
+			MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX		0x140
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10		0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+			MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+			MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
+			MX8MM_IOMUXC_SD2_WP_GPIO2_IO20			0x00
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
index d643381417f1..affbc67c2ef6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
@@ -117,7 +117,6 @@
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ptn5150>;
-		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
index d7830df5b6f9..190bde4edcd7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -8,7 +8,6 @@
 
 / {
 	model = "Variscite VAR-SOM-MX8MM module";
-	compatible = "variscite,var-som-mx8mm", "fsl,imx8mm";
 
 	chosen {
 		stdout-path = &uart4;
@@ -307,7 +306,7 @@
 	keep-power-in-suspend;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index de7f67a4ff2a..37db4f0dd505 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -5,9 +5,15 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/net/ti-dp83867.h>
 
 / {
+	aliases {
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0 0x80000000>;
@@ -113,6 +119,25 @@
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_AMBER>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
 		};
 	};
 };
@@ -272,7 +297,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -393,6 +418,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
index 6425773f68e0..429be2bab8a2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -47,25 +47,20 @@
 		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb1_en>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
 };
 
-/* off-board header */
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio1 {
@@ -144,9 +139,10 @@
 };
 
 &usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	dr_mode = "otg";
 	over-current-active-low;
-	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
@@ -204,20 +200,13 @@
 		>;
 	};
 
-	pinctrl_reg_usb1_en: regusb1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x41
-			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
-			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
-		>;
-	};
-
 	pinctrl_spi2: spi2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xd6
 		>;
 	};
 
@@ -234,4 +223,11 @@
 			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
 		>;
 	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso
index 4eaf8aabcbff..c09aa80d2ba2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso
@@ -13,6 +13,20 @@
 &{/} {
 	compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm";
 
+	reg_vana: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	reg_vddl: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
 	reg_cam: regulator-cam {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_cam>;
@@ -45,6 +59,8 @@
 		reg = <0x10>;
 		clocks = <&cam24m>;
 		VDIG-supply = <&reg_cam>;
+		VANA-supply = <&reg_vana>;
+		VDDL-supply = <&reg_vddl>;
 
 		port {
 			/* MIPI CSI-2 bus endpoint */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
index f6ad1a4b8b66..bb2056746f8c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
@@ -15,12 +15,8 @@
 /dts-v1/;
 /plugin/;
 
-&{/} {
-	compatible = "gw,imx8mm-gw72xx-0x";
-};
-
 &gpio4 {
-	rs485_en {
+	rs485-en-hog {
 		gpio-hog;
 		gpios = <0 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
index c3cd9f2b0db3..45ac8bdce869 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
@@ -18,19 +18,15 @@
 /dts-v1/;
 /plugin/;
 
-&{/} {
-	compatible = "gw,imx8mm-gw72xx-0x";
-};
-
 &gpio4 {
-	rs485_en {
+	rs485-en-hog {
 		gpio-hog;
 		gpios = <0 GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "rs485_en";
 	};
 
-	rs485_hd {
+	rs485-hd-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
index cc0a287226ab..30aa620d7004 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
@@ -18,19 +18,15 @@
 /dts-v1/;
 /plugin/;
 
-&{/} {
-	compatible = "gw,imx8mm-gw72xx-0x";
-};
-
 &gpio4 {
-	rs485_en {
+	rs485-en-hog {
 		gpio-hog;
 		gpios = <0 GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "rs485_en";
 	};
 
-	rs485_hd {
+	rs485-hd-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index 3a0a10e835a2..752caa38eb03 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -84,8 +84,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio1 {
@@ -152,23 +159,30 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		pcie@1,0 {
+		pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
-			pcie@2,3 {
+			pcie@3,0 {
 				reg = <0x1800 0 0 0 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
 
-				eth1: pcie@5,0 {
+				eth1: ethernet@0,0 {
 					reg = <0x0000 0 0 0 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
 
 					local-mac-address = [00 00 00 00 00 00];
 				};
@@ -312,6 +326,7 @@
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xd6
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso
index f3ece4b7fbbd..cfc014eb038d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso
@@ -13,6 +13,20 @@
 &{/} {
 	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
 
+	reg_vana: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	reg_vddl: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
 	reg_cam: regulator-cam {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_cam>;
@@ -45,6 +59,8 @@
 		reg = <0x10>;
 		clocks = <&cam24m>;
 		VDIG-supply = <&reg_cam>;
+		VANA-supply = <&reg_vana>;
+		VDDL-supply = <&reg_vddl>;
 
 		port {
 			/* MIPI CSI-2 bus endpoint */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
index 1f8ea20dfafc..b1a9f35e1dfa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
@@ -15,12 +15,8 @@
 /dts-v1/;
 /plugin/;
 
-&{/} {
-	compatible = "gw,imx8mm-gw73xx-0x";
-};
-
 &gpio4 {
-	rs485_en {
+	rs485-en-hog {
 		gpio-hog;
 		gpios = <0 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
index 3e6404340d52..44ebc0a58c51 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
@@ -18,19 +18,15 @@
 /dts-v1/;
 /plugin/;
 
-&{/} {
-	compatible = "gw,imx8mm-gw73xx-0x";
-};
-
 &gpio4 {
-	rs485_en {
+	rs485-en-hog {
 		gpio-hog;
 		gpios = <0 GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "rs485_en";
 	};
 
-	rs485_hd {
+	rs485-hd-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
index 2c71ab9854cb..2f8a7ac40873 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
@@ -18,19 +18,15 @@
 /dts-v1/;
 /plugin/;
 
-&{/} {
-	compatible = "gw,imx8mm-gw73xx-0x";
-};
-
 &gpio4 {
-	rs485_en {
+	rs485-en-hog {
 		gpio-hog;
 		gpios = <0 GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "rs485_en";
 	};
 
-	rs485_hd {
+	rs485-hd-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index d79fe9f62b95..2aa6c1090fc7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -109,7 +109,7 @@
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};
@@ -179,23 +179,30 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		pcie@1,0 {
+		pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
-			pcie@2,4 {
+			pcie@4,0 {
 				reg = <0x2000 0 0 0 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
 
-				eth1: pcie@6,0 {
+				eth1: ethernet@0,0 {
 					reg = <0x0000 0 0 0 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
 
 					local-mac-address = [00 00 00 00 00 00];
 				};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx-0x.dts
index 914753f062cd..04f06a55da5c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx-0x.dts
@@ -7,11 +7,11 @@
 
 #include "imx8mm.dtsi"
 #include "imx8mm-venice-gw700x.dtsi"
-#include "imx8mm-venice-gw7905.dtsi"
+#include "imx8mm-venice-gw75xx.dtsi"
 
 / {
-	model = "Gateworks Venice GW7905-0x i.MX8MM Development Kit";
-	compatible = "gateworks,imx8mm-gw7905-0x", "fsl,imx8mm";
+	model = "Gateworks Venice GW75xx-0x i.MX8MM Development Kit";
+	compatible = "gateworks,imx8mm-gw75xx-0x", "fsl,imx8mm";
 
 	chosen {
 		stdout-path = &uart2;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx.dtsi
index 5eb92005195c..53004c4a13aa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx.dtsi
@@ -116,6 +116,16 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		st,drdy-int-pin = <1>;
+	};
+
 	eeprom@52 {
 		compatible = "atmel,24c32";
 		reg = <0x52>;
@@ -198,6 +208,12 @@
 		>;
 	};
 
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8	0x159
+		>;
+	};
+
 	pinctrl_gpio_leds: gpioledgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x6	/* LEDG */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 87b80e2412cb..272c2b223d16 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -22,6 +22,8 @@
 		ethernet2 = &lan2;
 		ethernet3 = &lan3;
 		ethernet4 = &lan4;
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
 		usb0 = &usbotg1;
 		usb1 = &usbotg2;
 	};
@@ -285,7 +287,8 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi1>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+		   <&gpio4 24 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	flash@0 {
@@ -294,6 +297,12 @@
 		spi-max-frequency = <40000000>;
 		status = "okay";
 	};
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &fec1 {
@@ -319,7 +328,7 @@
 
 &gpio4 {
 	gpio-line-names = "", "", "", "",
-		"", "", "uart3_rs232#", "uart3_rs422#",
+		"dig1_ctl", "dig2_ctl", "uart3_rs232#", "uart3_rs422#",
 		"uart3_rs485#", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", "";
@@ -490,7 +499,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -824,6 +833,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -842,6 +853,8 @@
 
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4	0x40000041 /* DIG1_CTL */
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x40000041 /* DIG2_CTL */
 			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* DIG2_OUT */
 			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000041 /* DIG2_IN */
 			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* DIG1_IN */
@@ -987,6 +1000,7 @@
 			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
 			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
 			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x140
+			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24	0x140
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 06a394a41d7c..c09b40fc6dec 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -19,6 +19,8 @@
 
 	aliases {
 		ethernet1 = &eth1;
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
 		usb0 = &usbotg1;
 		usb1 = &usbotg2;
 	};
@@ -564,7 +566,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -635,13 +637,16 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		eth1: pcie@1,0 {
+		eth1: ethernet@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
 			local-mac-address = [00 00 00 00 00 00];
 		};
@@ -738,6 +743,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
index db1737bf637d..636daa3d6ca2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -18,6 +18,8 @@
 
 	aliases {
 		ethernet0 = &fec1;
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
 		usb0 = &usbotg1;
 	};
 
@@ -394,7 +396,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -619,6 +621,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
index 05489a31e7fd..99572961d9e1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
@@ -16,6 +16,11 @@
 	model = "Gateworks Venice GW7904 i.MX8MM board";
 	compatible = "gateworks,imx8mm-gw7904", "fsl,imx8mm";
 
+	aliases {
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
 	chosen {
 		stdout-path = &uart2;
 	};
@@ -438,7 +443,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -677,6 +682,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
index 1cff0b829357..3d0b14968131 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
@@ -10,16 +10,16 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
 		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,name = "imx8mm-wm8904";
+		simple-audio-card,name = "verdin-wm8904";
 		simple-audio-card,routing =
 			"Headphone Jack", "HPOUTL",
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";
 
@@ -32,6 +32,25 @@
 			sound-dai = <&sai2>;
 		};
 	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "HUB_PWR_EN";
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "PCIE_1_PWR_EN";
+		startup-delay-us = <100000>;
+	};
 };
 
 /* Verdin SPI_1 */
@@ -58,6 +77,11 @@
 	status = "okay";
 };
 
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 /* Current measurement into module VCC */
 &hwmon {
 	status = "okay";
@@ -93,6 +117,7 @@
 
 /* Verdin PCIE_1 */
 &pcie0 {
+	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };
 
@@ -115,6 +140,11 @@
 	status = "okay";
 };
 
+/* We support turning off sleep moci on Dahlia */
+&reg_force_sleep_moci {
+	status = "disabled";
+};
+
 /* Verdin I2S_1 */
 &sai2 {
 	status = "okay";
@@ -143,8 +173,16 @@
 
 /* Verdin USB_2 */
 &usbotg2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	disable-over-current;
 	status = "okay";
+
+	usb-hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		vdd-supply = <&reg_usb_hub>;
+	};
 };
 
 /* Verdin SD_1 */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
index 3c4b8ca125e3..1d8d146d9eeb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
@@ -10,7 +10,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
 		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,name = "imx8mm-nau8822";
+		simple-audio-card,name = "verdin-nau8822";
 		simple-audio-card,routing =
 			"Headphones", "LHP",
 			"Headphones", "RHP",
@@ -78,6 +78,11 @@
 	status = "okay";
 };
 
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 &gpio_expander_21 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-ivy.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-ivy.dtsi
new file mode 100644
index 000000000000..29075ff5eda6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-ivy.dtsi
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ *
+ * Common dtsi for Verdin IMX8MM SoM on Ivy carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
+ * https://www.toradex.com/products/carrier-board/ivy-carrier-board
+ */
+
+#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	/* AIN1 Voltage w/o AIN1_MODE gpio control */
+	ain1_voltage_unmanaged: voltage-divider-ain1 {
+		compatible = "voltage-divider";
+		#io-channel-cells = <1>;
+		io-channels = <&ivy_adc1 0>;
+		full-ohms = <19>;
+		output-ohms = <1>;
+	};
+
+	/* AIN1 Current w/o AIN1_MODE gpio control */
+	ain1_current_unmanaged: current-sense-shunt-ain1 {
+		compatible = "current-sense-shunt";
+		#io-channel-cells = <0>;
+		io-channels = <&ivy_adc1 1>;
+		shunt-resistor-micro-ohms = <100000000>;
+	};
+
+	/* AIN1_MODE - SODIMM 216 */
+	ain1_mode_mux_ctrl: mux-controller-0 {
+		compatible = "gpio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio5>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	ain1-voltage {
+		compatible = "io-channel-mux";
+		channels = "ain1_voltage", "";
+		io-channels = <&ain1_voltage_unmanaged 0>;
+		io-channel-names = "parent";
+		mux-controls = <&ain1_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	ain1-current {
+		compatible = "io-channel-mux";
+		channels = "", "ain1_current";
+		io-channels = <&ain1_current_unmanaged>;
+		io-channel-names = "parent";
+		mux-controls = <&ain1_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	/* AIN2 Voltage w/o AIN2_MODE gpio control */
+	ain2_voltage_unmanaged: voltage-divider-ain2 {
+		compatible = "voltage-divider";
+		#io-channel-cells = <1>;
+		io-channels = <&ivy_adc2 0>;
+		full-ohms = <19>;
+		output-ohms = <1>;
+	};
+
+	/* AIN2 Current w/o AIN2_MODE gpio control */
+	ain2_current_unmanaged: current-sense-shunt-ain2 {
+		compatible = "current-sense-shunt";
+		#io-channel-cells = <0>;
+		io-channels = <&ivy_adc2 1>;
+		shunt-resistor-micro-ohms = <100000000>;
+	};
+
+	/* AIN2_MODE - SODIMM 218 */
+	ain2_mode_mux_ctrl: mux-controller-1 {
+		compatible = "gpio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio6>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	ain2-voltage {
+		compatible = "io-channel-mux";
+		channels = "ain2_voltage", "";
+		io-channels = <&ain2_voltage_unmanaged 0>;
+		io-channel-names = "parent";
+		mux-controls = <&ain2_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	ain2-current {
+		compatible = "io-channel-mux";
+		channels = "", "ain2_current";
+		io-channels = <&ain2_current_unmanaged>;
+		io-channel-names = "parent";
+		mux-controls = <&ain2_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ivy_leds>;
+
+		/* D7 Blue - SODIMM 30 - LEDs.GPIO1 */
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D7 Green - SODIMM 32 - LEDs.GPIO2 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D7 Red - SODIMM 34 - LEDs.GPIO3 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Blue - SODIMM 36 - LEDs.GPIO4 */
+		led-3 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Green - SODIMM 54 - LEDs.GPIO5 */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Red - SODIMM 44 - LEDs.GPIO6 */
+		led-5 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D9 Blue - SODIMM 46 - LEDs.GPIO7 */
+		led-6 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D9 Red - SODIMM 48 - LEDs.GPIO8 */
+		led-7 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_3v2_ain1: regulator-3v2-ain1 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3200000>;
+		regulator-min-microvolt = <3200000>;
+		regulator-name = "+3V2_AIN1";
+	};
+
+	reg_3v2_ain2: regulator-3v2-ain2 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3200000>;
+		regulator-min-microvolt = <3200000>;
+		regulator-name = "+3V2_AIN2";
+	};
+
+	/* Ivy Power Supply Input Voltage */
+	ivy-input-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_1 */
+		io-channels = <&verdin_som_adc 7>;
+		full-ohms = <204700>; /* 200k + 4.7k */
+		output-ohms = <4700>;
+	};
+
+	ivy-5v-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_2 */
+		io-channels = <&verdin_som_adc 6>;
+		full-ohms = <39000>; /* 27k + 12k */
+		output-ohms = <12000>;
+	};
+
+	ivy-3v3-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_3 */
+		io-channels = <&verdin_som_adc 5>;
+		full-ohms = <54000>; /* 27k + 27k */
+		output-ohms = <27000>;
+	};
+
+	ivy-1v8-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_4 */
+		io-channels = <&verdin_som_adc 4>;
+		full-ohms = <39000>; /* 12k + 27k */
+		output-ohms = <27000>;
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	pinctrl-0 = <&pinctrl_ecspi2>,
+		    <&pinctrl_gpio1>,
+		    <&pinctrl_gpio4>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio3 4 GPIO_ACTIVE_LOW>,
+		   <&gpio5 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		spi-max-frequency = <18500000>;
+	};
+
+	fram@2 {
+		compatible = "fujitsu,mb85rs256", "atmel,at25";
+		reg = <2>;
+		address-width = <16>;
+		size = <32768>;
+		spi-max-frequency = <33000000>;
+		pagesize = <1>;
+	};
+};
+
+/* EEPROM on Ivy */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&fec1 {
+	status = "okay";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", /* 0 */
+		"",
+		"REL3", /* SODIMM 64 */
+		"",
+		"",
+		"",
+		"DIG_1", /* SODIMM 56 */
+		"DIG_2", /* SODIMM 58 */
+		"REL1",  /* SODIMM 60 */
+		"REL2",  /* SODIMM 62 */
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"REL4",  /* SODIMM 66 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", /* 0 */
+		"",
+		"",
+		"",
+		"",
+		"GPIO2", /* Verdin GPIO_2 - SODIMM 208 */
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"GPIO3", /* Verdin GPIO_3 - SODIMM 210 */
+		"",
+		"",
+		"";
+};
+
+/* Temperature sensor on Ivy */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_4 CSI */
+&i2c3 {
+	status = "okay";
+
+	ivy_adc1: adc@40 {
+		compatible = "ti,ads1119";
+		reg = <0x40>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio7>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&reg_3v2_ain1>;
+		dvdd-supply = <&reg_3v2_ain1>;
+		vref-supply = <&reg_3v2_ain1>;
+		#address-cells = <1>;
+		#io-channel-cells = <1>;
+		#size-cells = <0>;
+
+		/* AIN1 0-33V Voltage Input */
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+		};
+
+		/* AIN1 0-20mA Current Input */
+		channel@1 {
+			reg = <1>;
+			diff-channels = <2 3>;
+		};
+	};
+
+	ivy_adc2: adc@41 {
+		compatible = "ti,ads1119";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio8>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&reg_3v2_ain2>;
+		dvdd-supply = <&reg_3v2_ain2>;
+		vref-supply = <&reg_3v2_ain2>;
+		#address-cells = <1>;
+		#io-channel-cells = <1>;
+		#size-cells = <0>;
+
+		/* AIN2 0-33V Voltage Input */
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+		};
+
+		/* AIN2 0-20mA Current Input */
+		channel@1 {
+			reg = <1>;
+			diff-channels = <2 3>;
+		};
+	};
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin USB_1*/
+&usbotg1 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>, <&pinctrl_gpio3>,
+		    <&pinctrl_ivy_dig_inputs>, <&pinctrl_ivy_relays>;
+
+	pinctrl_ivy_dig_inputs: ivydiginputsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6	0x96>, /* SODIMM 56 */
+			<MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x96>; /* SODIMM 58 */
+	};
+
+	pinctrl_ivy_leds: ivyledsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25	0x16>, /* SODIMM 30 */
+			<MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24	0x16>, /* SODIMM 32 */
+			<MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x16>, /* SODIMM 34 */
+			<MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23	0x16>, /* SODIMM 36 */
+			<MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x16>, /* SODIMM 44 */
+			<MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x16>, /* SODIMM 46 */
+			<MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x16>, /* SODIMM 48 */
+			<MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x16>; /* SODIMM 54 */
+	};
+
+	pinctrl_ivy_relays: ivyrelaysgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x16>, /* SODIMM 60 */
+			<MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9	0x16>, /* SODIMM 62 */
+			<MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2	0x16>, /* SODIMM 64 */
+			<MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14	0x16>; /* SODIMM 66 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi
new file mode 100644
index 000000000000..4a0799d63446
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MM SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0	0x106>, /* SODIMM 52 */
+			<MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x106>, /* SODIMM 54 */
+			<MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6	0x106>, /* SODIMM 56 */
+			<MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x106>; /* SODIMM 58 */
+	};
+
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2	0x146>; /* SODIMM 64 */
+	};
+
+	pinctrl_tpm_irq: tpmirqgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14	0x141>; /* SODIMM 66 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-ivy.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-ivy.dts
new file mode 100644
index 000000000000..82b34a12ee2b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-ivy.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-ivy.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Ivy";
+	compatible = "toradex,verdin-imx8mm-nonwifi-ivy",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000000..1b1999f3a80e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Mallow";
+	compatible = "toradex,verdin-imx8mm-nonwifi-mallow",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-ivy.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-ivy.dts
new file mode 100644
index 000000000000..3369ba852b5c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-ivy.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-ivy.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Ivy";
+	compatible = "toradex,verdin-imx8mm-wifi-ivy",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts
new file mode 100644
index 000000000000..2916145f31bb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Mallow";
+	compatible = "toradex,verdin-imx8mm-wifi-mallow",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi
index 1e28c78e381f..763f069e8405 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi
@@ -81,6 +81,11 @@
 	pinctrl-0 = <&pinctrl_gpios_ext_yavia>;
 };
 
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 &hwmon_temp {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 6f0811587142..1594ce9182a5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "imx8mm.dtsi"
+#include "imx8mm-overdrive.dtsi"
 
 / {
 	chosen {
@@ -17,20 +18,6 @@
 		rtc1 = &snvs_rtc;
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 45 63 88 119 158 203 255>;
-		default-brightness-level = <4>;
-		/* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */
-		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>;
-		power-supply = <&reg_3p3v>;
-		/* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */
-		pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>;
-		status = "disabled";
-	};
-
 	/* Fixed clock dedicated to SPI CAN controller */
 	clk40m: oscillator {
 		compatible = "fixed-clock";
@@ -65,13 +52,6 @@
 		status = "disabled";
 	};
 
-	panel_lvds: panel-lvds {
-		compatible = "panel-lvds";
-		backlight = <&backlight>;
-		data-mapping = "vesa-24";
-		status = "disabled";
-	};
-
 	/* Carrier Board Supplies */
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
@@ -110,6 +90,22 @@
 		startup-delay-us = <200000>;
 	};
 
+	/*
+	 * By default we enable CTRL_SLEEP_MOCI#, this is required to have
+	 * peripherals on the carrier board powered.
+	 * If more granularity or power saving is required this can be disabled
+	 * in the carrier board device tree files.
+	 */
+	reg_force_sleep_moci: regulator-force-sleep-moci {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "CTRL_SLEEP_MOCI#";
+	};
+
 	reg_usb_otg1_vbus: regulator-usb-otg1 {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -145,7 +141,20 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_SD";
-		startup-delay-us = <2000>;
+		startup-delay-us = <20000>;
+	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vsel>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <1800000>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		regulator-name = "PMIC_USDHC_VSELECT";
+		vin-supply = <&reg_nvcc_sd>;
 	};
 
 	reserved-memory {
@@ -211,15 +220,16 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 };
 
-/* Verdin CAN_1 (On-module) */
+/* On-module SPI */
 &ecspi3 {
 	#address-cells = <1>;
 	#size-cells = <0>;
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>, <&gpio4 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
+	pinctrl-0 = <&pinctrl_ecspi3>, <&pinctrl_tpm_spi_cs>;
 	status = "okay";
 
+	/* Verdin CAN_1 */
 	can1: can@0 {
 		compatible = "microchip,mcp251xfd";
 		clocks = <&clk40m>;
@@ -229,6 +239,12 @@
 		reg = <0>;
 		spi-max-frequency = <8500000>;
 	};
+
+	verdin_som_tpm: tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 /* Verdin ETH_1 (On-module PHY) */
@@ -266,7 +282,7 @@
 			  "SODIMM_19",
 			  "",
 			  "",
-			  "",
+			  "PMIC_USDHC_VSELECT",
 			  "",
 			  "",
 			  "",
@@ -333,16 +349,6 @@
 			  "SODIMM_212",
 			  "SODIMM_151",
 			  "SODIMM_153";
-
-	ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <1 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-	};
 };
 
 /* On-module I2C */
@@ -353,6 +359,7 @@
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 	status = "okay";
 
 	pca9450: pmic@25 {
@@ -457,6 +464,7 @@
 			};
 
 			reg_nvcc_sd: LDO5 {
+				regulator-always-on;
 				regulator-max-microvolt = <3300000>;
 				regulator-min-microvolt = <1800000>;
 				regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
@@ -469,11 +477,12 @@
 		reg = <0x32>;
 	};
 
-	adc@49 {
+	verdin_som_adc: adc@49 {
 		compatible = "ti,ads1015";
 		reg = <0x49>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		#io-channel-cells = <1>;
 
 		/* Verdin I2C_1 (ADC_4 - ADC_3) */
 		channel@0 {
@@ -533,7 +542,7 @@
 	};
 
 	eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 	};
@@ -541,12 +550,13 @@
 
 /* Verdin I2C_2_DSI */
 &i2c2 {
-	clock-frequency = <10000>;
+	clock-frequency = <400000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
 	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 	status = "disabled";
 };
 
@@ -560,6 +570,7 @@
 	pinctrl-1 = <&pinctrl_i2c3_gpio>;
 	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 };
 
 /* Verdin I2C_1 */
@@ -570,6 +581,7 @@
 	pinctrl-1 = <&pinctrl_i2c4_gpio>;
 	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 
 	gpio_expander_21: gpio-expander@21 {
 		compatible = "nxp,pcal6416";
@@ -635,7 +647,7 @@
 
 	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
 	eeprom_display_adapter: eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 		status = "disabled";
@@ -643,7 +655,7 @@
 
 	/* EEPROM on carrier board */
 	eeprom_carrier_board: eeprom@57 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x57>;
 		status = "disabled";
@@ -787,6 +799,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
 	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
 };
 
 &wdog1 {
@@ -801,8 +814,7 @@
 	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
 		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
 		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
-		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
-		    <&pinctrl_pmic_tpm_ena>;
+		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>;
 
 	pinctrl_can1_int: can1intgrp {
 		fsl,pins =
@@ -929,7 +941,7 @@
 	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
 	pinctrl_gpio_9_dsi: gpio9dsigrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x146>;	/* SODIMM 17 */
+			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x1c6>;	/* SODIMM 17 */
 	};
 
 	/* Verdin GPIO_10_DSI (pulled-up as active-low) */
@@ -1104,7 +1116,7 @@
 	};
 
 	/* control signal for optional ATTPM20P or SE050 */
-	pinctrl_pmic_tpm_ena: pmictpmenagrp {
+	pinctrl_tpm_spi_cs: tpmspicsgrp {
 		fsl,pins =
 			<MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x106>;	/* PMIC_TPM_ENA */
 	};
@@ -1209,13 +1221,17 @@
 			<MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5		0x6>;	/* SODIMM 76 */
 	};
 
+	pinctrl_usdhc2_vsel: usdhc2vselgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4	0x10>; /* PMIC_USDHC_VSELECT */
+	};
+
 	/*
 	 * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the
 	 * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here.
 	 */
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x90>,	/* SODIMM 78 */
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x90>,	/* SODIMM 74 */
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x90>,	/* SODIMM 80 */
@@ -1226,7 +1242,6 @@
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x94>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x94>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x94>,
@@ -1237,7 +1252,6 @@
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x96>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x96>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x96>,
@@ -1249,7 +1263,6 @@
 	/* Avoid backfeeding with removed card power */
 	pinctrl_usdhc2_sleep: usdhc2slpgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x0>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x0>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x0>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 738024baaa57..fc3cd639310e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -62,7 +62,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -83,7 +82,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -102,7 +100,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -121,7 +118,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -636,6 +632,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mm-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -647,7 +645,6 @@
 						<&clk IMX8MM_CLK_AUDIO_AHB>,
 						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
 						<&clk IMX8MM_SYS_PLL3>,
-						<&clk IMX8MM_VIDEO_PLL1>,
 						<&clk IMX8MM_AUDIO_PLL1>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
 							 <&clk IMX8MM_ARM_PLL_OUT>,
@@ -657,7 +654,6 @@
 							<400000000>,
 							<400000000>,
 							<750000000>,
-							<594000000>,
 							<393216000>;
 			};
 
@@ -919,6 +915,8 @@
 					clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
 						 <&clk IMX8MM_CLK_UART2_ROOT>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
@@ -1133,7 +1131,7 @@
 				assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
 							 <&clk IMX8MM_SYS_PLL2_1000M>,
 							 <&clk IMX8MM_SYS_PLL1_800M>;
-				assigned-clock-rates = <594000000>, <500000000>, <200000000>;
+				assigned-clock-rates = <24000000>, <500000000>, <200000000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
 				status = "disabled";
@@ -1151,12 +1149,8 @@
 				clocks = <&clk IMX8MM_CLK_DSI_CORE>,
 					 <&clk IMX8MM_CLK_DSI_PHY_REF>;
 				clock-names = "bus_clk", "sclk_mipi";
-				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
-						  <&clk IMX8MM_CLK_DSI_PHY_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
-							 <&clk IMX8MM_CLK_24M>;
-				assigned-clock-rates = <266000000>, <24000000>;
-				samsung,pll-clock-frequency = <24000000>;
+				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
 				status = "disabled";
@@ -1172,6 +1166,13 @@
 							remote-endpoint = <&lcdif_to_dsim>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_dsi_out: endpoint {
+						};
+					};
 				};
 			};
 
@@ -1257,7 +1258,6 @@
 				reg = <0x32e40000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
 				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
@@ -1278,7 +1278,6 @@
 				reg = <0x32e50000 0x200>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
 				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop2>;
@@ -1374,9 +1373,11 @@
 
 		pcie0_ep: pcie-ep@33800000 {
 			compatible = "fsl,imx8mm-pcie-ep";
-			reg = <0x33800000 0x400000>,
-			      <0x18000000 0x8000000>;
-			reg-names = "dbi", "addr_space";
+			reg = <0x33800000 0x100000>,
+			      <0x18000000 0x8000000>,
+			      <0x33900000 0x100000>,
+			      <0x33b00000 0x100000>;
+			reg-names = "dbi", "addr_space", "dbi2", "atu";
 			num-lanes = <1>;
 			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "dma";
@@ -1408,7 +1409,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
@@ -1423,7 +1424,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
@@ -1466,6 +1467,7 @@
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>, /* GIC Dist */
 			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
index 20018ee2c803..77d14ea459e5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
@@ -40,6 +40,20 @@
 		};
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_audio: regulator-audio {
 		compatible = "regulator-fixed";
 		regulator-name = "3v3_aud";
@@ -158,6 +172,8 @@
 		assigned-clock-parents = <&clk IMX8MN_CLK_24M>;
 		assigned-clock-rates = <24000000>;
 		AVDD-supply = <&reg_camera>;  /* 2.8v */
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
 		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
index 35b8d2060cd9..37fc5ed98d7f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
@@ -62,8 +62,8 @@
 		compatible = "adi,adv7535";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_hdmi_bridge>;
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>, <0x3e>, <0x3c>, <0x3f>;
+		reg-names = "main", "edid", "cec", "packet";
 		adi,dsi-lanes = <4>;
 		avdd-supply = <&reg_hdmi>;
 		a2vdd-supply = <&reg_hdmi>;
@@ -99,8 +99,6 @@
 };
 
 &lcdif {
-	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
-	assigned-clock-rates = <594000000>;
 	status = "okay";
 };
 
@@ -126,6 +124,7 @@
 	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index 90073b16536f..917b7d0007a7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2020 Compass Electronics Group, LLC
  */
 
+#include "imx8mn-overdrive.dtsi"
+
 / {
 	aliases {
 		rtc0 = &rtc;
@@ -86,6 +88,9 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
@@ -240,6 +245,12 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		quartz-load-femtofarads = <12500>;
+		wakeup-source;
 	};
 };
 
@@ -278,7 +289,7 @@
 	mmc-pwrseq = <&usdhc1_pwrseq>;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		pinctrl-names = "default";
@@ -294,6 +305,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -323,6 +336,7 @@
 			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
 			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10             0x146
 			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
 		>;
 	};
@@ -358,6 +372,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x146
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
index 22a754d438f1..d20393c2d901 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "imx8mn.dtsi"
+#include "imx8mn-bsh-smm-s2-display.dtsi"
 
 / {
 	chosen {
@@ -264,7 +265,7 @@
 	non-removable;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		compatible = "brcm,bcm4329-fmac";
 		reg = <1>;
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
new file mode 100644
index 000000000000..98dec3c42060
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 BSH
+ */
+
+/ {
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer-panel0 {
+			compatible = "simple-framebuffer";
+			clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, /* lcdif */
+				 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+				 <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+				 <&clk IMX8MN_VIDEO_PLL1>,
+				 <&clk IMX8MN_CLK_DISP_AXI_ROOT>, /* pgc_dispmix */
+				 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+				 <&clk IMX8MN_CLK_DISP_AXI>,
+				 <&clk IMX8MN_CLK_DISP_APB>,
+				 <&clk IMX8MN_SYS_PLL2_1000M>,
+				 <&clk IMX8MN_SYS_PLL1_800M>,
+				 <&clk IMX8MN_CLK_DSI_CORE>, /* mipi_disi */
+				 <&clk IMX8MN_CLK_DSI_PHY_REF>;
+
+			power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>,
+					<&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>;
+			dvdd-supply = <&reg_3v3_dvdd>;
+			avdd-supply = <&reg_v3v3_avdd>;
+			status = "disabled";
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 700000 0>;	/* 700000 ns = 1337Hz */
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <50>;
+		status = "okay";
+	};
+
+	reg_3v3_dvdd: regulator-3v3-O3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dvdd>;
+		regulator-name = "3v3-dvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_v3v3_avdd: regulator-3v3-O2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_avdd>;
+		regulator-name = "3v3-avdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bl>;
+	status = "okay";
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
+	assigned-clock-rates = <594000000>;
+	status = "okay";
+};
+
+&pgc_dispmix {
+	assigned-clocks = <&clk IMX8MN_CLK_DISP_AXI>, <&clk IMX8MN_CLK_DISP_APB>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <500000000>, <200000000>;
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <12000000>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "sharp,ls068b3sx02", "syna,r63353";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		reg = <0>;
+
+		backlight = <&backlight>;
+		dvdd-supply = <&reg_3v3_dvdd>;
+		avdd-supply = <&reg_v3v3_avdd>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_avdd: avddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x16	/* VDD 3V3_VO2 */
+		>;
+	};
+
+	/* This is for both PWM and voltage regulators for display */
+	pinctrl_bl: blgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT	0x16
+		>;
+	};
+
+	pinctrl_dvdd: dvddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16	/* VDD 3V3_VO3 */
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29	0x16	/* panel reset */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
index c6ad65becc97..475cbf9e0d1e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
@@ -64,7 +64,6 @@
 		DVDD-supply = <&buck5_reg>;
 		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		ai31xx-micbias-vg = <MICBIAS_AVDDV>;
-		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
index 000e2c0596df..d25032e3ceab 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
@@ -112,3 +112,19 @@
 		};
 	};
 };
+
+&i2c2 {
+	hdmi@3d {
+		avdd-supply = <&buck5>;
+		dvdd-supply = <&buck5>;
+		pvdd-supply = <&buck5>;
+		a2vdd-supply = <&buck5>;
+		v1p2-supply = <&buck5>;
+	};
+};
+
+&i2c3 {
+	camera@3c {
+		DOVDD-supply = <&buck5>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index cc2ff59ac53b..6d85a0b052c9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -158,3 +158,19 @@
 		};
 	};
 };
+
+&i2c2 {
+	hdmi@3d {
+		avdd-supply = <&buck5_reg>;
+		dvdd-supply = <&buck5_reg>;
+		pvdd-supply = <&buck5_reg>;
+		a2vdd-supply = <&buck5_reg>;
+		v1p2-supply = <&buck5_reg>;
+	};
+};
+
+&i2c3 {
+	camera@3c {
+		DOVDD-supply = <&buck5_reg>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts
new file mode 100644
index 000000000000..6f9b82958b96
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som-symphony.dts"
+
+/ {
+	model = "DimOnOff Gateway EVK board";
+	compatible = "dimonoff,gateway-evk", "variscite,var-som-mx8mn",
+		     "fsl,imx8mn";
+
+	/*
+	 * U30 FPF2193 regulator.
+	 * Source = BASE_PER_3V3 = SOM_3V3 (COM pin 49).
+	 */
+	reg_disp_3v3: regulator-disp-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "Display 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-enter {
+			label = "enter";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			wakeup-source;
+		};
+	};
+
+	/* Bourns PEC12R rotary encoder, 24 steps. */
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rotary>;
+		gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, /* A */
+			<&gpio5 13 GPIO_ACTIVE_LOW>; /* B */
+		linux,axis = <0>; /* REL_X */
+		rotary-encoder,encoding = "gray";
+		rotary-encoder,relative-axis;
+	};
+};
+
+/* Disable Asynchronous Sample Rate Converter (audio) */
+&easrc {
+	status = "disabled";
+};
+
+&ecspi1 {
+	/* Resistive touch controller */
+	/delete-node/ touchscreen@0;
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c2 {
+	adc@48 {
+		compatible = "ti,ads7924";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adc>;
+		vref-supply = <&reg_disp_3v3>;
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			label = "Pot0";
+		};
+		channel@1 {
+			reg = <1>;
+			label = "Pot1";
+		};
+		channel@2 {
+			reg = <2>;
+			label = "Pot2";
+		};
+		channel@3 {
+			reg = <3>;
+			label = "Pot3";
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		reset-source; /* For watchdog. */
+	};
+
+	rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reset-source; /* For watchdog. */
+		interrupt-parent = <&gpio5>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* J17.6 on EVK */
+	};
+};
+
+&i2c3 {
+	touchscreen@38 {
+		status = "disabled";
+	};
+
+	codec@1a {
+		status = "disabled";
+	};
+
+	/* DS1337 RTC module */
+	rtc@68 {
+		status = "disabled";
+	};
+};
+
+&sai5 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0xc6
+		>;
+	};
+
+	pinctrl_rotary: rotarygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x00000156
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x00000156
+		>;
+	};
+
+	pinctrl_adc: adcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x00000156
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10	0x00000156
+			MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x00000156
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
index 0b71f50d936e..41330210a05f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -125,3 +125,19 @@
 		};
 	};
 };
+
+&i2c2 {
+	hdmi@3d {
+		avdd-supply = <&buck5>;
+		dvdd-supply = <&buck5>;
+		pvdd-supply = <&buck5>;
+		a2vdd-supply = <&buck5>;
+		v1p2-supply = <&buck5>;
+	};
+};
+
+&i2c3 {
+	camera@3c {
+		DOVDD-supply = <&buck5>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 3f6a19839c9e..145355ff91b4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -30,7 +30,7 @@
 
 		port {
 			hdmi_connector_in: endpoint {
-				remote-endpoint = <&adv7533_out>;
+				remote-endpoint = <&adv7535_out>;
 			};
 		};
 	};
@@ -52,6 +52,27 @@
 		enable-active-high;
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vddext_3v3: regulator-vddext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
@@ -103,12 +124,35 @@
 			"Line Out Jack", "LINEVOUTR";
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
-		spdif-controller = <&spdif1>;
-		spdif-out;
-		spdif-in;
+		audio-cpu = <&spdif1>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
 	};
 };
 
@@ -179,15 +223,11 @@
 
 	hdmi@3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
+		v3p3-supply = <&reg_vddext_3v3>;
 
 		ports {
 			#address-cells = <1>;
@@ -196,7 +236,7 @@
 			port@0 {
 				reg = <0>;
 
-				adv7533_in: endpoint {
+				adv7535_in: endpoint {
 					remote-endpoint = <&dsi_out>;
 				};
 			};
@@ -204,7 +244,7 @@
 			port@1 {
 				reg = <1>;
 
-				adv7533_out: endpoint {
+				adv7535_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
@@ -213,7 +253,7 @@
 	};
 
 	ptn5110: tcpc@50 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec1>;
 		reg = <0x50>;
@@ -221,12 +261,6 @@
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
 		typec1_con: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -238,6 +272,12 @@
 				     PDO_VAR(5000, 20000, 3000)>;
 			op-sink-microwatt = <15000000>;
 			self-powered;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
 		};
 	};
 };
@@ -270,6 +310,8 @@
 		assigned-clock-rates = <24000000>;
 		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_1v8>;
+		DVDD-supply = <&reg_1v5>;
 
 		port {
 			ov5640_to_mipi_csi2: endpoint {
@@ -285,6 +327,16 @@
 	status = "okay";
 };
 
+&micfil {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MN_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
 &mipi_csi {
 	status = "okay";
 
@@ -311,7 +363,7 @@
 			reg = <1>;
 
 			dsi_out: endpoint {
-				remote-endpoint = <&adv7533_in>;
+				remote-endpoint = <&adv7535_in>;
 				data-lanes = <1 2 3 4>;
 			};
 		};
@@ -335,6 +387,11 @@
 	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	fsl,sai-mclk-direction-output;
+	clocks = <&clk IMX8MN_CLK_SAI3_IPG>, <&clk IMX8MN_CLK_DUMMY>,
+		<&clk IMX8MN_CLK_SAI3_ROOT>, <&clk IMX8MN_CLK_DUMMY>,
+		<&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_AUDIO_PLL1_OUT>,
+		<&clk IMX8MN_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
 	status = "okay";
 };
 
@@ -522,6 +579,18 @@
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI5_MCLK_SAI5_MCLK	0xd6
+			MX8MN_IOMUXC_SAI5_RXC_PDM_CLK		0xd6
+			MX8MN_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC	0xd6
+			MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0	0xd6
+			MX8MN_IOMUXC_SAI5_RXD1_PDM_BIT_STREAM1	0xd6
+			MX8MN_IOMUXC_SAI5_RXD2_PDM_BIT_STREAM2	0xd6
+			MX8MN_IOMUXC_SAI5_RXD3_PDM_BIT_STREAM3	0xd6
+		>;
+	};
+
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x141
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi
new file mode 100644
index 000000000000..5d03fb893e90
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu {
+	assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>,
+			  <&clk IMX8MN_CLK_GPU_SHADER>,
+			  <&clk IMX8MN_CLK_GPU_AXI>,
+			  <&clk IMX8MN_CLK_GPU_AHB>,
+			  <&clk IMX8MN_GPU_PLL>;
+	assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+				  <&clk IMX8MN_GPU_PLL_OUT>,
+				  <&clk IMX8MN_SYS_PLL1_800M>,
+				  <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <600000000>,
+			       <600000000>,
+			       <800000000>,
+			       <400000000>,
+			       <1200000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts
new file mode 100644
index 000000000000..ea1855171fb0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som.dtsi"
+
+/ {
+	model = "RVE gateway";
+	compatible = "rve,gateway", "variscite,var-som-mx8mn", "fsl,imx8mn";
+
+	crystal_duart_24m: crystal-duart-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-enter {
+			label = "enter";
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+		};
+
+		key-exit {
+			label = "exit";
+			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ESC>;
+		};
+	};
+
+	lcd {
+		compatible = "hit,hd44780";
+		display-height-chars = <2>;
+		display-width-chars = <20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+		data-gpios = <&gpio5  1 GPIO_ACTIVE_HIGH>,
+			     <&gpio1  6 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 14 GPIO_ACTIVE_HIGH>,
+			     <&gpio4 28 GPIO_ACTIVE_HIGH>,
+			     <&gpio5 24 GPIO_ACTIVE_HIGH>,
+			     <&gpio5  2 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 12 GPIO_ACTIVE_HIGH>,
+			     <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Bourns PEC12R rotary encoder, 24 steps. */
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rotary>;
+		gpios = <&gpio1  5 GPIO_ACTIVE_LOW>, /* A */
+			<&gpio3 21 GPIO_ACTIVE_LOW>; /* B */
+		linux,axis = <0>; /* REL_X */
+		rotary-encoder,encoding = "gray";
+		rotary-encoder,relative-axis;
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+
+	duart1: serial@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+		clocks = <&crystal_duart_24m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "RADIO0", "RADIO1", "RADIO2", "RADIO3",
+				  "RADIO4", "RADIO_RESET", "TP12", "TP11";
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-active-low;
+	};
+
+	/delete-node/ touchscreen@0;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	status = "okay";
+
+	duart2: serial@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+		clocks = <&crystal_duart_24m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_USER", "LED_R_USER", "LED_G_USER",
+				  "GPIO_EXT3", "GPIO_EXT2", "GPIO_EXT1",
+				  "GPIO_EXT0", "TP13";
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-active-low;
+	};
+};
+
+/* Configure PWM pins in GPIO mode: */
+&gpio5 {
+	gpio-line-names = "", "", "", "PWM3", "PWM2", "PWM1";
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	/* Carrier board EEPROM */
+	eeprom_cb: eeprom@56 {
+		compatible = "atmel,24c04";
+		reg = <0x56>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3p3v>;
+	};
+
+	lm75: sensor@48 {
+		compatible = "st,stlm75";
+		reg = <0x48>;
+		vs-supply = <&reg_3p3v>;
+	};
+
+	mcp7940: rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&i2c3 {
+	codec@1a {
+		status = "disabled";
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pcf8574_1: gpio@38 {
+		compatible = "nxp,pcf8574";
+		reg = <0x38>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_COMM3", "LED_R_COMM3", "LED_G_COMM3",
+				  "TP14", "TP15", "LED_G_COMM4", "LED_R_COMM4",
+				  "LED_B_COMM4";
+	};
+
+	pcf8574_2: gpio@39 {
+		compatible = "nxp,pcf8574";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_COMM2", "LED_G_COMM2", "LED_B_COMM1",
+				  "LED_R_COMM2", "LED_R_COMM1", "LED_G_COMM1",
+				  "TP16", "TP17";
+	};
+};
+
+/* Bluetooth */
+&uart2 {
+	status = "disabled";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* SD interface on expansion connector. */
+&usdhc2 {
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x13
+			MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x13
+			MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x13
+			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x13 /* SS0 */
+			MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x13 /* SC16 IRQ */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x13
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x13
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x13
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x13 /* SS0 */
+			MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20	0x13 /* SC16 IRQ */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1	0xc6 /* Enter */
+			MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23	0xc6 /* Exit */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1		0x00000156 /* D0 */
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x00000156 /* D1 */
+			MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x00000156 /* D2 */
+			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x00000156 /* D3 */
+			MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24	0x00000156 /* D4 */
+			MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x00000156 /* D5 */
+			MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x00000156 /* D6 */
+			MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25	0x00000156 /* D7 */
+			MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23	0x00000156 /* E */
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x00000156 /* RS */
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x00000156 /* R/W */
+		>;
+	};
+
+	pinctrl_rotary: rotarygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x00000156 /* A */
+			MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x00000156 /* B */
+		>;
+	};
+
+	/* Override Card Detect function GPIO value (GPIO1_IO10) from SOM: */
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
new file mode 100644
index 000000000000..1f2a0fe70a0a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mn-pinfunc.h"
+
+&{/} {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X19";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_connector>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+	};
+};
+
+/*
+ * rst_usb_hub_hog and sel_usb_hub_hog have property 'output-high',
+ * dt overlay don't support /delete-property/. Both 'output-low' and
+ * 'output-high' will be exist under hog nodes if overlay file set
+ * 'output-low'. Workaround is disable these hog and create new hog with
+ * 'output-low'.
+ */
+
+&rst_usb_hub_hog {
+	status = "disabled";
+};
+
+&expander0 {
+	rst-usb-low-hub-hog {
+		gpio-hog;
+		gpios = <13 0>;
+		output-low;
+		line-name = "RST_USB_HUB#";
+	};
+};
+
+&sel_usb_hub_hog {
+	status = "disabled";
+};
+
+&gpio2 {
+	sel-usb-low-hub-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	/delete-property/ disable-over-current;
+	over-current-active-low;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_usb1_connector: usb1-connectorgrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
index 3f1e49bfe38f..d7f7f9aafb7d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx";
 	compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
@@ -40,7 +41,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0hub_sel>;
 
-	sel-usb-hub-hog {
+	sel_usb_hub_hog: sel-usb-hub-hog {
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -63,6 +64,11 @@
 	};
 };
 
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <20000000>;
+};
+
 &sai3 {
 	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
 	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
@@ -73,6 +79,10 @@
 		 <&clk IMX8MN_AUDIO_PLL2_OUT>;
 };
 
+&sound {
+	audio-asrc = <&easrc>;
+};
+
 &tlv320aic3x04 {
 	clock-names = "mclk";
 	clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
@@ -197,8 +207,7 @@
 
 	pinctrl_usbotg: usbotggrp {
 		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x84>,
-			   <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>,
-			   <MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID		0x1C4>;
+			   <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>;
 	};
 
 	pinctrl_usdhc2: usdhc2grp {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
index fb24b9aa1b93..1d23814e11cd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
@@ -52,6 +52,10 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&easrc {
+	status = "okay";
+};
+
 &flexspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexspi>;
@@ -60,11 +64,16 @@
 	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <84000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5_reg>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
index a7a57442cb81..3434b189fa58 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
@@ -57,6 +57,15 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	/* Peripherals supply, enabled by Q2 after SOM_3V3 rises. */
+	reg_per_3v3: regulator-peripheral-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "per_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &ethphy {
@@ -79,6 +88,7 @@
 		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 		#gpio-cells = <2>;
 		wakeup-source;
+		vcc-supply = <&reg_per_3v3>;
 
 		/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
 		usb3-sata-sel-hog {
@@ -116,7 +126,6 @@
 		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ptn5150>;
-		status = "okay";
 
 		port {
 			typec1_dr_sw: endpoint {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index b8946edf317b..38ef9e4fdf07 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -31,6 +31,14 @@
 		gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	reg_3v3_fixed: regulator-3v3-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &A53_0 {
@@ -234,6 +242,7 @@
 		compatible = "atmel,24c04";
 		reg = <0x52>;
 		pagesize = <16>;
+		vcc-supply = <&reg_3v3_fixed>;
 	};
 };
 
@@ -291,7 +300,7 @@
 	keep-power-in-suspend;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index 0b1fa04f1d67..a5f52f60169e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -17,6 +17,8 @@
 	compatible = "gw,imx8mn-gw7902", "fsl,imx8mn";
 
 	aliases {
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
 		usb0 = &usbotg1;
 	};
 
@@ -562,7 +564,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -691,6 +693,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 1bb1d0c1bae4..b98b3d0ddf25 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -62,7 +62,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -83,7 +82,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -102,7 +100,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -121,7 +118,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -637,6 +633,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mn-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -862,6 +860,8 @@
 					clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
 						 <&clk IMX8MN_CLK_UART2_ROOT>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
@@ -1102,6 +1102,13 @@
 							remote-endpoint = <&lcdif_to_dsim>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_dsi_out: endpoint {
+						};
+					};
 				};
 			};
 
@@ -1166,7 +1173,7 @@
 							 <&clk IMX8MN_SYS_PLL1_800M>;
 				assigned-clock-rates = <266000000>,
 						       <24000000>,
-						       <594000000>,
+						       <24000000>,
 						       <500000000>,
 						       <200000000>;
 				#power-domain-cells = <1>;
@@ -1211,7 +1218,6 @@
 				reg = <0x32e40000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
 				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-adpismarc.dts b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-adpismarc.dts
new file mode 100644
index 000000000000..6a688510dad9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-adpismarc.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx8mp-aristainetos3a-som-v1.dtsi"
+
+&{/} {
+	model = "Aristainetos3 ADLink PI SMARC carrier";
+	compatible = "abb,imx8mp-aristanetos3-adpismarc",
+		     "abb,imx8mp-aristanetos3-som",
+		     "fsl,imx8mp";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&i2c2 {
+	gpio8: pinctrl@3e {
+		compatible = "semtech,sx1509q";
+		reg = <0x3e>;
+
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		semtech,probe-reset;
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&gpio6>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios-lvds.dtso
new file mode 100644
index 000000000000..9d1f3b4ccc79
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios-lvds.dtso
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	model = "Aristainetos3 helios carrier with LVDS";
+	compatible = "abb,imx8mp-aristanetos3-helios",
+		     "abb,imx8mp-aristanetos3-som",
+		     "fsl,imx8mp";
+
+	panel_lvds: panel-lvds {
+		compatible = "lg,lb070wv8";
+		power-supply = <&reg_vcc_disp>;
+		backlight = <&lvds_backlight>;
+
+		port {
+			in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+
+	reg_vcc_disp: regulator-disp {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_vcc_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "disp_power_en_2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	lvdssel-hog {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "LVDSSEL";
+	};
+};
+
+&hdmi_blk_ctrl {
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "disabled";
+};
+
+&hdmi_tx {
+	status = "disabled";
+};
+
+&hdmi_tx_phy {
+	status = "disabled";
+};
+
+&irqsteer_hdmi {
+	status = "disabled";
+};
+
+&ldb_lvds_ch0 {
+	remote-endpoint = <&in_lvds0>;
+};
+
+&lcdif1 {
+	status = "disabled";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "disabled";
+};
+
+&lvds_backlight {
+	status = "okay";
+};
+
+&lvds_bridge {
+	/* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
+	assigned-clock-rates = <232820000>;
+	status = "okay";
+};
+
+&media_blk_ctrl {
+	/*
+	 * currently it is not possible to let display clocks configure
+	 * automatically, so we need to set them manually
+	 */
+	assigned-clock-rates = <500000000>, <200000000>, <0>,
+		/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
+		<33260000>, <0>,
+		/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
+		<465640000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios.dts b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios.dts
new file mode 100644
index 000000000000..a4e649a8239b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-aristainetos3a-som-v1.dtsi"
+
+&{/} {
+	model = "Aristainetos3 helios carrier";
+	compatible = "abb,imx8mp-aristanetos3-helios",
+		     "abb,imx8mp-aristanetos3-som",
+		     "fsl,imx8mp";
+
+	led-controller {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <20>;
+			gpios = <&pca6416 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			function-enumerator = <20>;
+			gpios = <&pca6416 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <20>;
+			gpios = <&pca6416 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <20>;
+			gpios = <&pca6416 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&fec {
+	status = "disabled";
+};
+
+&i2c1 {
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&i2c3 {
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "DIN0_CON",
+			"DIN1_CON",
+			"DIN2_CON",
+			"DIN3_CON",
+			"DIN4_CON",
+			"DIN5_CON",
+			"DIN6_CON",
+			"DIN7_CON",
+			"PM102_RES",
+			"COMx_RES",
+			"BPL_RES",
+			"PC_RES",
+			"LED_RED",
+			"LED_YELLOW",
+			"LED_GREEN",
+			"LED_BLUE";
+	};
+
+	rtc@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts
new file mode 100644
index 000000000000..58e36de7a2cd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mp-aristainetos3a-som-v1.dtsi"
+
+&{/} {
+	model = "Aristainetos3 proton2s carrier";
+	compatible = "abb,imx8mp-aristanetos3-proton2s",
+		     "abb,imx8mp-aristanetos3-som",
+		     "fsl,imx8mp";
+
+	watchdog {
+		/* MAX6371KA */
+		compatible = "linux,wdt-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_watchdog_gpio>;
+		always-running;
+		gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		hw_algo = "level";
+		/* Reset triggers in 3..9 seconds */
+		hw_margin_ms = <1500>;
+	};
+};
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&eqos {
+	max-speed = <100>;
+};
+
+&ecspi1 {
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+};
+
+&fec {
+	status = "disabled";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_proton2s>;
+
+	gpio-line-names =
+		"", "", "", "", "", "", "", "POWER",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"RELAY0", "RELAY1", "RELAY2", "HEATER",
+		"FAN", "SPARE",	"CLEAR", "FAULT",
+		"", "", "", "", "", "", "", "", "";
+};
+
+&i2c2 {
+	tlc59108@40 {
+		compatible = "ti,tlc59108";
+		reg = <0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0x0>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <20>;
+		};
+
+		led@1 {
+			reg = <0x1>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <20>;
+		};
+
+		led@2 {
+			reg = <0x2>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <21>;
+		};
+
+		led@3 {
+			reg = <0x3>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <21>;
+		};
+
+		led@4 {
+			reg = <0x4>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <21>;
+		};
+
+		led@5 {
+			reg = <0x5>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <22>;
+		};
+
+		led@6 {
+			reg = <0x6>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <22>;
+		};
+
+		led@7 {
+			reg = <0x7>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <22>;
+		};
+	};
+
+	rtc1: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&uart3 {
+	pinctrl-0 = <&pinctrl_uart3>;
+};
+
+&uart4 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rts-delay = <0 0>;
+	rts-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usdhc1 {
+	status = "disabled";
+};
+
+&wdog1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi
new file mode 100644
index 000000000000..f654d866e58c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi
@@ -0,0 +1,1107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "ADLINK LEC-iMX8MP-Q-N-4G-32G";
+	compatible = "abb,imx8mp-aristanetos3-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		mmc0 = &usdhc3;	/* eMMC */
+		mmc1 = &usdhc2;	/* MicroSD */
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200";
+		stdout-path = &uart2;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			function-enumerator = <0>;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	lvds_backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_bklt_en>;
+		pwms = <&pwm2 0 50000 0>;
+		enable-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <80>;
+		status = "disabled";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* Memory size 512 MiB..8 GiB will be filled by U-Boot */
+		reg = <0x0 0x40000000 0 0x08000000>;
+	};
+
+	pcie0_refclk: clock-pcie-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_reg>;
+		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can1-stby";
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_reg>;
+		enable-active-high;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can2-stby";
+	};
+
+	reg_dp83867_2v5: regulator-enet {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "enet_2v5";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb1_host_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_vbus>;
+		enable-active-high;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb1_host_vbus";
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		enable-active-high;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; /* SD2_RESET */
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3_SD";
+		off-on-delay-us = <12000>;
+		startup-delay-us = <100>;
+		vin-supply = <&buck4>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&clk {
+	clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+		 <&clk_ext3>, <&clk_ext4>;
+	clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+		      "clk_ext3", "clk_ext4";
+	assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>,
+			  <&clk IMX8MP_CLK_A53_CORE>,
+			  <&clk IMX8MP_CLK_NOC>,
+			  <&clk IMX8MP_CLK_NOC_IO>,
+			  <&clk IMX8MP_CLK_GIC>,
+			  <&clk IMX8MP_CLK_AUDIO_AHB>,
+			  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>,
+			  <&clk IMX8MP_AUDIO_PLL1>,
+			  <&clk IMX8MP_AUDIO_PLL2>,
+			  <&clk IMX8MP_VIDEO_PLL1>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs2>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW &gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* eth0 */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	snps,force_thresh_dma_mode;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: eqos-ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			ti,dp83867-rxctrl-strap-quirk;
+			interrupt-parent = <&gpio4>;
+			interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+};
+
+/* eth1 */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_rgmii>;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpio = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			ti,dp83867-rxctrl-strap-quirk;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "disabled";
+};
+
+&hdmi_blk_ctrl {
+	status = "okay";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		/*
+		 * i.MX 8M Plus Data Sheet for Consumer Products
+		 * 3.1.4 Operating ranges
+		 * MIMX8ML8CVNKZAB
+		 */
+		regulators {
+			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
+				regulator-name = "buck1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2: BUCK2 {	/* VDD_ARM */
+				regulator-name = "buck2";
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4: BUCK4 {	/* VDD_3V3 */
+				regulator-name = "buck4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5: BUCK5 {	/* VDD_1V8 */
+				regulator-name = "buck5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {	/* NVCC_DRAM_1V1 */
+				regulator-name = "buck6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo2: LDO2 {	/* VDDA_1V8 */
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3: LDO3 {	/* VDDA_1V8 */
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {	/* PMIC_LDO4 */
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo5: LDO5 {	/* NVCC_SD2 */
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	status = "okay";
+};
+
+&i2c6 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	scl-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	/* TPM - ST33TPHF2XI2C U2301 */
+	tpm: tpm@2e {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+
+		label = "tpm";
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
+	/* SX1509(0) U2605 */
+	gpio6: pinctrl@3f {
+		compatible = "semtech,sx1509q";
+		reg = <0x3f>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		semtech,probe-reset;
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	/* RTC U2607 */
+	rtc0: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+
+	/* SX1509(1) U2606 */
+	gpio7: pinctrl@70 {
+		compatible = "semtech,sx1509q";
+		reg = <0x70>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		semtech,probe-reset;
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+
+		gpio6-cfg {
+			pins = "gpio6";
+			output-high;
+		};
+
+		gpio7-cfg {
+			pins = "gpio7";
+			output-high;
+		};
+	};
+};
+
+&irqsteer_hdmi {
+	status = "okay";
+};
+
+&lcdif1 {
+	status = "disabled";
+};
+
+&lcdif2 {
+	status = "disabled";
+};
+
+/* HDMI */
+&lcdif3 {
+	status = "okay";
+
+};
+
+&lvds_bridge {
+	status = "disabled";
+};
+
+&mipi_dsi {
+	status = "disabled";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	fsl,tx-deemph-gen1 = <0x1f>;
+	fsl,max-link-speed = <3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+/* SD slot */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: aristainetos3-ecspi1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x82
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40000
+		>;
+	};
+
+	pinctrl_ecspi1_cs2: aristainetos3-ecspi1-cs2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x40000
+		>;
+	};
+
+	pinctrl_ecspi2: aristainetos3-ecspi2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40000
+		>;
+	};
+
+	pinctrl_eqos_rgmii: aristainetos3-eqos-rgmii-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22				0x19
+		>;
+	};
+
+	pinctrl_fec_rgmii: aristainetos3-fec-rgmii-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x19
+		>;
+	};
+
+	pinctrl_flexcan1: aristainetos3-flexcan1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_flexcan1_reg: aristainetos3-flexcan1-reg-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05  0x154
+		>;
+	};
+
+	pinctrl_flexcan2: aristainetos3-flexcan2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX         0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX         0x154
+		>;
+	};
+
+	pinctrl_flexcan2_reg: aristainetos3-flexcan2-reg-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27      0x154
+		>;
+	};
+
+	pinctrl_gpio3_hog: aristainetos3-gpio3-hog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23	0xd6
+		>;
+	};
+
+	pinctrl_gpio_led: aristainetos3-gpio-led-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_gpio_proton2s: aristainetos3-gpio-proton2s-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07	0x19
+		>;
+	};
+
+	pinctrl_hdmi: aristainetos3-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000019
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x40000019
+		>;
+	};
+
+	pinctrl_i2c1: aristainetos3-i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: aristainetos3-i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1c3
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1c3
+		>;
+	};
+
+	pinctrl_i2c2: aristainetos3-i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: aristainetos3-i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1c3
+		>;
+	};
+
+	pinctrl_i2c3: aristainetos3-i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: aristainetos3-i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x1c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x1c3
+		>;
+	};
+
+	pinctrl_i2c5: aristainetos3-i2c5-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL	0x400001c3
+			MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c6: aristainetos3-i2c6-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL	0x400001c3
+			MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c6_gpio: aristainetos3-i2c6-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19	0x1c3
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20	0x1c3
+		>;
+	};
+
+	pinctrl_lcd0_vcc_en: aristainetos3-lcd0-vcc-en-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0xd6
+		>;
+	};
+
+	pinctrl_lvds_bklt_en: aristainetos3-lvds-bklt-en-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0xd6
+		>;
+	};
+
+	pinctrl_pcie: aristainetos3-pcie-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x61
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20	0x41
+		>;
+	};
+
+	pinctrl_pmic: aristainetos3-pmic-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x41
+		>;
+	};
+
+	pinctrl_pwm1: aristainetos3-pwm1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm2: aristainetos3-pwm2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT	0x116
+		>;
+	};
+
+	pinctrl_tpm_irq: aristainetos3-tpm-irq-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0xd6
+		>;
+	};
+
+	pinctrl_uart1: aristainetos3-uart1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart2: aristainetos3-uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x140
+			MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS	0x140
+		>;
+	};
+
+	pinctrl_uart3: aristainetos3-uart3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_NAND_CE0_B__UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart4: aristainetos3-uart4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX    0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX    0x140
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x140
+			MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS 0x140
+		>;
+	};
+
+	pinctrl_usb1_vbus: aristainetos3-usb1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x19
+		>;
+	};
+
+	pinctrl_usdhc1: aristainetos3-usdhc1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: aristainetos3-usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: aristainetos3-usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: aristainetos3-usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: aristainetos3-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: aristainetos3-usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: aristainetos3-usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x40000080
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: aristainetos3-usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc3: aristainetos3-usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: aristainetos3-usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: aristainetos3-usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_watchdog_gpio: aristainetos3-wdog-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06	0x19
+		>;
+	};
+
+	pinctrl_wdog: aristainetos3-wdog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
index 0bea0798d2db..31c33acb560c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -94,6 +94,28 @@
 		};
 	};
 
+	bridge-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector: endpoint {
+				remote-endpoint = <&hdmi_to_connector>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -153,6 +175,21 @@
 		enable-active-high;
 	};
 
+	sound-adv7535 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-adv7535";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&adv_bridge>;
+		};
+	};
+
 	sound-dmic {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "sound-pdm";
@@ -185,13 +222,12 @@
 
 		simple-audio-card,cpu {
 			sound-dai = <&sai3>;
+			frame-master;
+			bitclock-master;
 		};
 
 		simple-audio-card,codec {
 			sound-dai = <&wm8962>;
-			clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
-			frame-master;
-			bitclock-master;
 		};
 	};
 };
@@ -208,7 +244,7 @@
 	status = "okay";
 
 	tpm: tpm@0 {
-		compatible = "infineon,slb9670";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tpm>;
@@ -257,6 +293,26 @@
 	};
 };
 
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			hdmi_to_connector:endpoint {
+				remote-endpoint = <&hdmi_connector>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c2 {
 	clock-frequency = <384000>;
 	pinctrl-names = "default";
@@ -274,6 +330,43 @@
 		#interrupt-cells = <2>;
 	};
 
+	adv_bridge: hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>;
+		reg-names = "main";
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		adi,dsi-lanes = <4>;
+		#sound-dai-cells = <0>;
+		avdd-supply = <&buck5>;
+		dvdd-supply = <&buck5>;
+		pvdd-supply = <&buck5>;
+		a2vdd-supply = <&buck5>;
+		v1p2-supply = <&buck5>;
+		v3p3-supply = <&buck4>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+
 	pcieclk: clock-generator@68 {
 		compatible = "renesas,9fgv0241";
 		reg = <0x68>;
@@ -282,10 +375,14 @@
 	};
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
 &i2c3 {
 	/* Connected to USB Hub */
 	usb-typec@52 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		reg = <0x52>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec>;
@@ -398,6 +495,14 @@
 	};
 };
 
+&lcdif1 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
 &micfil {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pdm>;
@@ -407,6 +512,21 @@
 	status = "okay";
 };
 
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
@@ -425,10 +545,19 @@
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
-	assigned-clocks = <&clk IMX8MP_CLK_SAI3>,
-			  <&clk IMX8MP_AUDIO_PLL2> ;
-	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
-	assigned-clock-rates = <12288000>, <361267200>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
 	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
@@ -556,6 +685,15 @@
 		>;
 	};
 
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c2
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000010
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x40000010
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL	0x400001c2
@@ -612,6 +750,14 @@
 		>;
 	};
 
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC	0xd6
+		>;
+	};
+
 	pinctrl_tpm: tpmgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19 /* Reset */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
index e5da90804780..6a62cb32e22e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
@@ -50,6 +50,8 @@
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
 	status = "okay";
 
 	mdio {
@@ -66,6 +68,69 @@
 			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
 };
 
 &flexspi {
@@ -192,6 +257,12 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		quartz-load-femtofarads = <12500>;
+		wakeup-source;
 	};
 };
 
@@ -206,6 +277,10 @@
 	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
 	uart-has-rtscts;
 	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8997-bt";
+	};
 };
 
 &usdhc1 {
@@ -312,6 +387,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x1d0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts b/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts
new file mode 100644
index 000000000000..8290f187b79f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "imx8mp-sr-som.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP CuBox-M";
+	compatible = "solidrun,imx8mp-cubox-m",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		/delete-property/ ethernet1;
+		rtc0 = &carrier_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_pins>;
+		linux,autosuspend-period = <125>;
+		wakeup-source;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status {
+			label = "status";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+
+	vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vmmc: regulator-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc_pins>;
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <250>;
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c3 {
+	carrier_rtc: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+
+	hdmi_pins: pinctrl-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+
+	ir_pins: pinctrl-ir-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x4f
+		>;
+	};
+
+	led_pins: pinctrl-led-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x0
+		>;
+	};
+
+	usdhc2_pins: pinctrl-usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	vbus_pins: pinctrl-vbus-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x100
+		>;
+	};
+
+	vmmc_pins: pinctrl-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x0
+		>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+	vbus-supply = <&vbus>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+	vbus-supply = <&vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc2_pins>;
+	pinctrl-1 = <&usdhc2_100mhz_pins>;
+	pinctrl-2 = <&usdhc2_200mhz_pins>;
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	cap-power-off-card;
+	full-pwr-cycle;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index d98a040860a4..16078ff60ef0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/net/qca-ar803x.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mp.dtsi"
 
 / {
@@ -45,6 +46,31 @@
 		clock-frequency = <25000000>;
 	};
 
+	clk_pwm4: clock-pwm4 {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+		clock-output-names = "codec-pwm4";
+		/*
+		 * 1 / 83 ns ~= 12 MHz , but since the PWM input clock is 24 MHz
+		 * and the calculated PWM period is 1 and duty cycle is 50%, the
+		 * result is exactly 12 MHz, which is fine for SGTL5000 MCLK.
+		 */
+		pwms = <&pwm4 0 83 0>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J17";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	panel: panel {
 		/* Compatible string is filled in by panel board DT Overlay. */
 		backlight = <&backlight>;
@@ -82,6 +108,24 @@
 		vin-supply = <&buck4>;
 	};
 
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
 	watchdog { /* TPS3813 */
 		compatible = "linux,wdt-gpio";
 		pinctrl-names = "default";
@@ -121,7 +165,7 @@
 	flash@0 {	/* W25Q128JVEI */
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <100000000>;	/* Up to 133 MHz */
+		spi-max-frequency = <40000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <1>;
 	};
@@ -279,6 +323,33 @@
 		"", "SPI3_CS#", "", "", "", "", "", "";
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
@@ -288,6 +359,15 @@
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_pwm4>;
+		VDDA-supply = <&buck4>;
+		VDDIO-supply = <&buck4>;
+	};
+
 	usb-hub@2c {
 		compatible = "microchip,usb2514bi";
 		reg = <0x2c>;
@@ -429,6 +509,21 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	clocks = <&pcieclk 0>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	fsl,max-link-speed = <3>;
+	reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_panel_pwm>;
@@ -436,6 +531,22 @@
 	status = "disabled";
 };
 
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	status = "okay";
+};
+
 /* SD slot */
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
@@ -444,6 +555,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -486,7 +598,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
+	status = "disabled";
 };
 
 &usb3_phy0 {
@@ -609,6 +721,13 @@
 		>;
 	};
 
+	pinctrl_hdmi: hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+
 	pinctrl_hog_feature: hog-feature-grp {
 		fsl,pins = <
 			/* GPIO5_IO03 */
@@ -785,6 +904,12 @@
 		>;
 	};
 
+	pinctrl_pwm4: pwm4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT		0xd6
+		>;
+	};
+
 	pinctrl_rtc: rtc-grp {
 		fsl,pins = <
 			/* RTC_IRQ# */
@@ -816,7 +941,6 @@
 			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
 			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
 			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
-			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
 			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
 		>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
index 267ceffc02d8..af02af9e5334 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -20,6 +20,18 @@
 		stdout-path = &uart2;
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -75,7 +87,7 @@
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
-	phy-connection-type = "rgmii-id";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	status = "okay";
 
@@ -94,6 +106,28 @@
 	};
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -197,10 +231,8 @@
 };
 
 &i2c2 {
-	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
 };
 
 &i2c3 {
@@ -241,6 +273,10 @@
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -358,6 +394,15 @@
 		>;
 	};
 
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL			0x1c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA			0x1c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD				0x19
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC				0x19
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL					0x400001c2
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
index 0afd90224a59..d241db3743a9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
@@ -63,6 +63,50 @@
 		regulator-always-on;
 	};
 
+	reg_csi1_1v8: regulator-csi1-vdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "CSI1_VDD1V8";
+		gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_baseboard_vdd3v3>;
+	};
+
+	reg_csi1_3v3: regulator-csi1-vdd3v3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "CSI1_VDD3V3";
+		gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd5v0>;
+	};
+
+	reg_csi2_1v8: regulator-csi2-vdd1v8 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_csi2_1v8>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "CSI2_VDD1V8";
+		gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_baseboard_vdd3v3>;
+	};
+
+	reg_csi2_3v3: regulator-csi2-vdd3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_csi2_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "CSI2_VDD3V3";
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd5v0>;
+	};
+
 	regulator-vbus-usb20 {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <5000000>;
@@ -100,7 +144,6 @@
 	pinctrl-0 = <&pinctrl_eqos>;
 	nvmem-cells = <&ethmac1>;
 	nvmem-cell-names = "mac-address";
-	phy-supply = <&reg_baseboard_vdd3v3>;
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-id";
 	status = "okay";
@@ -413,6 +456,18 @@
 		>;
 	};
 
+	pinctrl_reg_csi2_1v8: regcsi21v8grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x19
+		>;
+	};
+
+	pinctrl_reg_csi2_3v3: regcsi23v3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x19
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x14f
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
index bc312aa1bfc8..91094c227744 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
@@ -6,6 +6,8 @@
 
 #include "imx8mp.dtsi"
 
+#include <dt-bindings/leds/common.h>
+
 / {
 	model = "Polyhex i.MX8MPlus Debix SOM A";
 	compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp";
@@ -20,6 +22,20 @@
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
 };
 
 &A53_0 {
@@ -203,6 +219,12 @@
 };
 
 &iomuxc {
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16		0x19
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c2
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-drc02.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-drc02.dts
new file mode 100644
index 000000000000..c6bf7fd91981
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-drc02.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R204-F1638-SPI16-E2-CAN2-RTC-I-01D2
+ * DHCOM PCB number: 660-100 or newer
+ * DRC02 PCB number: 568-100 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM on DRC02";
+	compatible = "dh,imx8mp-dhcom-drc02", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&eqos {	/* First ethernet */
+	pinctrl-0 = <&pinctrl_eqos_rmii>;
+	phy-handle = <&ethphy0f>;
+	phy-mode = "rmii";
+
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+				 <&clk IMX8MP_SYS_PLL2_100M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	assigned-clock-rates = <0>, <100000000>, <50000000>;
+};
+
+&ethphy0g {	/* Micrel KSZ9131RNXI */
+	status = "disabled";
+};
+
+&ethphy0f {	/* SMSC LAN8740Ai */
+	status = "okay";
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-0 = <&pinctrl_fec_rmii>;
+	phy-handle = <&ethphy1f>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+				 <&clk IMX8MP_SYS_PLL2_100M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	assigned-clock-rates = <0>, <100000000>, <50000000>, <0>;
+};
+
+&ethphy1f {	/* SMSC LAN8740Ai */
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&flexcan2 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"DRC02-In1", "", "", "", "", "DHCOM-I", "DRC02-HW2", "DRC02-HW0",
+		"DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+
+	/*
+	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+	 * GPIO line, however the i.MX8 UART driver assumes RX happens
+	 * during TX anyway and that it only controls drive enable DE
+	 * line. Hence, the RX is always enabled here.
+	 */
+	rs485-rx-en-hog {
+		gpio-hog;
+		gpios = <13 0>; /* GPIO Q */
+		line-name = "rs485-rx-en";
+		output-low;
+	};
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"DHCOM-O", "DHCOM-N", "", "SOM-HW1", "", "", "", "",
+		"", "", "", "", "DRC02-In2", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "SOM-HW0", "",
+		"", "", "", "", "", "", "SOM-MEM0", "SOM-MEM1",
+		"SOM-MEM2", "SOM-HW2", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "SOM-HW1", "", "", "", "",
+		"", "", "", "DRC02-Out2", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "DHCOM-C", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "DHCOM-E", "DRC02-Out1",
+		"", "", "", "", "", "", "", "";
+};
+
+/* No HS connector on this SoM variant, so no HDMI, PCIe and only USB HS. */
+&hdmi_blk_ctrl {
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "disabled";
+};
+
+&hdmi_tx {
+	status = "disabled";
+};
+
+&hdmi_tx_phy {
+	status = "disabled";
+};
+
+&i2c3 {
+	/* Resistive touch controller not populated on this one SoM variant. */
+	touchscreen@49 {
+		status = "disabled";
+	};
+};
+
+&irqsteer_hdmi {
+	status = "disabled";
+};
+
+&lcdif3 {
+	status = "disabled";
+};
+
+&pcie_phy {
+	status = "disabled";
+};
+
+&pcie {
+	status = "disabled";
+};
+
+/* Console UART */
+&pinctrl_uart1 {
+	fsl,pins = <
+		/* No pull-ups on DRC02, enable in-SoC pull-ups */
+		MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX		0x149
+		MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX		0x149
+	>;
+};
+
+&pinctrl_uart3 {
+	fsl,pins = <
+		/* No pull-ups on DRC02, enable in-SoC pull-ups */
+		MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x149
+		MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x149
+	>;
+};
+
+&uart1 {
+	/*
+	 * Due to the use of CAN2 the signals for CAN2 Tx and Rx are routed to
+	 * DHCOM UART1 RTS/CTS pins. Therefore this UART have to use DHCOM GPIOs
+	 * for RTS/CTS. So configure DHCOM GPIO I as RTS and GPIO M as CTS.
+	 */
+	/delete-property/ uart-has-rtscts;
+	cts-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; /* GPIO M */
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_dhcom_i &pinctrl_dhcom_m>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+};
+
+&uart3 {
+	/*
+	 * On DRC02 this UART is used as RS485 interface and RS485_TX_En is
+	 * controlled by DHCOM GPIO P. So remove RTS/CTS pins and the property
+	 * uart-has-rtscts from this UART and add the DHCOM GPIO P pin via
+	 * rts-gpios. The RS485_RX_En is controlled by DHCOM GPIO Q, see gpio1
+	 * node above.
+	 */
+	/delete-property/ uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_dhcom_p &pinctrl_dhcom_q>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; /* GPIO P */
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&uart2 {
+	bluetooth {
+		status = "disabled";
+	};
+};
+
+/* USB_OTG port is not routed out on DRC02. */
+&usb3_0 {
+	status = "disabled";
+};
+
+&usb_dwc3_0 {
+	status = "disabled";
+};
+
+/* USB_HOST port has USB Hub connected to it, PWR/OC pins are unused */
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&usdhc1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	/*
+	 * GPIO I is connected to UART1_RTS
+	 * GPIO M is connected to UART1_CTS
+	 * GPIO P is connected to RS485_TX_En
+	 * GPIO Q is connected to RS485_RX_En
+	 */
+	pinctrl-0 = <&pinctrl_hog_base
+		     &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_j
+		     &pinctrl_dhcom_k &pinctrl_dhcom_l &pinctrl_dhcom_n
+		     &pinctrl_dhcom_o &pinctrl_dhcom_r &pinctrl_dhcom_s
+		     &pinctrl_dhcom_int>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
index 3b1c940860e0..ebdf13e97b4e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
@@ -69,6 +69,18 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X38";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	led {
 		compatible = "gpio-leds";
 
@@ -184,6 +196,33 @@
 	status = "okay";
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
 &pcie_phy {
 	clock-names = "ref";
 	clocks = <&hsio_blk_ctrl>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
index b749e28e5ede..ef012e8365b1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
@@ -75,6 +75,18 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X28";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	led {
 		compatible = "gpio-leds";
 
@@ -167,6 +179,16 @@
 				VDDIO-supply = <&reg_vdd_3p3v_awo>;
 			};
 
+			csi2exp: gpio@24 {
+				compatible = "nxp,pca9570";
+				reg = <0x24>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"CSI2_#RESET", "CSI2_#PWDN",
+					"CSI_#PWDN", "CSI_#RESET";
+			};
+
 			typec@3d {
 				compatible = "nxp,ptn5150";
 				reg = <0x3d>;
@@ -238,6 +260,33 @@
 	status = "okay";
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	ddc-i2c-bus = <&i2cmuxed1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
 &pcie_phy {
 	clocks = <&pcieclk 1>;
 	clock-names = "ref";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts
new file mode 100644
index 000000000000..703cf0fb3d2b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023-2024 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R204-F1638-SPI16-E-SD-RTC-T-RGB-I-01D2
+ * DHCOM PCB number: 660-200 or newer
+ * PicoITX PCB number: 487-600 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM PicoITX";
+	compatible = "dh,imx8mp-dhcom-picoitx", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+};
+
+&eqos {	/* First ethernet */
+	pinctrl-0 = <&pinctrl_eqos_rmii>;
+	phy-handle = <&ethphy0f>;
+	phy-mode = "rmii";
+
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+				 <&clk IMX8MP_SYS_PLL2_100M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	assigned-clock-rates = <0>, <100000000>, <50000000>;
+};
+
+&ethphy0g {	/* Micrel KSZ9131RNXI */
+	status = "disabled";
+};
+
+&ethphy0f {	/* SMSC LAN8740Ai */
+	status = "okay";
+};
+
+&fec {
+	status = "disabled";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"DHCOM-G", "", "", "",
+		"", "DHCOM-I", "PicoITX-HW0", "PicoITX-HW2",
+		"DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "PicoITX-HW1", "", "", "", "",
+		"", "", "", "", "DHCOM-INT", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "SOM-HW1", "", "", "", "",
+		"", "", "", "PicoITX-Out2", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "PicoITX-In2", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "",
+		"", "", "PicoITX-In1", "PicoITX-Out1",
+		"", "", "", "", "", "", "", "";
+};
+
+/* No HS connector on this SoM variant, so no HDMI, PCIe and only USB HS. */
+&hdmi_blk_ctrl {
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "disabled";
+};
+
+&hdmi_tx {
+	status = "disabled";
+};
+
+&hdmi_tx_phy {
+	status = "disabled";
+};
+
+&irqsteer_hdmi {
+	status = "disabled";
+};
+
+&lcdif3 {
+	status = "disabled";
+};
+
+&pcie_phy {
+	status = "disabled";
+};
+
+&pcie {
+	status = "disabled";
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&uart2 {
+	bluetooth {
+		status = "disabled";
+	};
+};
+
+/* USB_OTG port is not routed out on PicoITX. */
+&usb3_0 {
+	status = "disabled";
+};
+
+&usb_dwc3_0 {
+	status = "disabled";
+};
+
+&usb3_1 {
+	fsl,over-current-active-low;
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&usdhc1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	/*
+	 * The following DHCOM GPIOs are used on this board.
+	 * Therefore, they have been removed from the list below.
+	 * I: yellow led
+	 */
+	pinctrl-0 = <&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_j
+		     &pinctrl_dhcom_k &pinctrl_dhcom_l &pinctrl_dhcom_m
+		     &pinctrl_dhcom_n &pinctrl_dhcom_o &pinctrl_dhcom_p
+		     &pinctrl_dhcom_q &pinctrl_dhcom_r &pinctrl_dhcom_s
+		     &pinctrl_dhcom_int>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index d8963f32ec84..68c2e0156a5c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -78,6 +78,11 @@
 	cpu-supply = <&buck2>;
 };
 
+&audio_blk_ctrl {
+	assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>;
+	assigned-clock-rates = <393216000>;
+};
+
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
@@ -105,14 +110,14 @@
 		#size-cells = <0>;
 
 		/* Up to one of these two PHYs may be populated. */
-		ethphy0f: ethernet-phy@0 { /* SMSC LAN8740Ai */
+		ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
 			compatible = "ethernet-phy-id0007.c110",
 				     "ethernet-phy-ieee802.3-c22";
 			interrupt-parent = <&gpio3>;
 			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy0>;
 			pinctrl-names = "default";
-			reg = <0>;
+			reg = <1>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
 			reset-gpios = <&ioexp 4 GPIO_ACTIVE_LOW>;
@@ -151,14 +156,14 @@
 		#size-cells = <0>;
 
 		/* Up to one PHY may be populated. */
-		ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */
+		ethphy1f: ethernet-phy@2 { /* SMSC LAN8740Ai */
 			compatible = "ethernet-phy-id0007.c110",
 				     "ethernet-phy-ieee802.3-c22";
 			interrupt-parent = <&gpio4>;
 			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy1>;
 			pinctrl-names = "default";
-			reg = <1>;
+			reg = <2>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
 			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
@@ -254,8 +259,8 @@
 				  <&clk IMX8MP_CLK_CLKOUT2>,
 				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
-		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
-		reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		assigned-clock-rates = <13000000>, <13000000>, <208000000>;
+		reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 
 		ports {
@@ -420,6 +425,18 @@
 		reg = <0x53>;
 	};
 
+	eeprom0wl: eeprom@58 {
+		compatible = "atmel,24c32d-wl";	/* M24C32-D WL page of 0x50 */
+		pagesize = <32>;
+		reg = <0x58>;
+	};
+
+	eeprom1wl: eeprom@5b {
+		compatible = "atmel,24c32d-wl";	/* M24C32-D WL page of 0x53 */
+		pagesize = <32>;
+		reg = <0x5b>;
+	};
+
 	ioexp: gpio@74 {
 		compatible = "nxp,pca9539";
 		reg = <0x74>;
@@ -573,7 +590,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	brcmf: bcrmf@1 {	/* muRata 2AE */
+	brcmf: wifi@1 {	/* muRata 2AE */
 		reg = <1>;
 		compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
 		/*
@@ -592,6 +609,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts b/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts
new file mode 100644
index 000000000000..138f21e257aa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 TechNexion Ltd.
+ *
+ * Author: Ray Chang <ray.chang@technexion.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-edm-g.dtsi"
+
+/ {
+	compatible = "technexion,edm-g-imx8mp-wb", "technexion,edm-g-imx8mp", "fsl,imx8mp";
+	model = "TechNexion EDM-G-IMX8MP SOM on WB-EDM-G";
+
+	connector {
+		compatible = "usb-c-connector";
+		data-role = "dual";
+		label = "USB-C";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "HDMI OUT";
+		type = "a";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			default-state = "on";
+			gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+			label = "gpio-led";
+		};
+	};
+
+	pcie0_refclk: clock-pcie-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_pwr_3v3: regulator-pwr-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "pwr-3v3";
+	};
+
+	reg_pwr_5v: regulator-pwr-5v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "pwr-5v";
+	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+		model = "audio-hdmi";
+	};
+
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		audio-asrc = <&easrc>;
+		audio-codec = <&wm8960>;
+		audio-cpu = <&sai3>;
+		audio-routing = "Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT1", "Mic Jack",
+			"Mic Jack", "MICB";
+		model = "wm8960-audio";
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&easrc {
+	fsl,asrc-rate  = <48000>;
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "DSI_RST", "",
+		"", "", "", "", "", "PCIE_CLKREQ_N", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+	pinctrl-0 = <&pinctrl_gpio1>;
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "GPIO_P249", "GPIO_P251",
+		"", "GPIO_P255", "", "", "", "", "", "",
+		"DSI_BL_EN", "DSI_VDDEN", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+	pinctrl-0 = <&pinctrl_gpio4>;
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&pinctrl_hdmi>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	wm8960: audio-codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&reg_pwr_3v3>;
+		DBVDD-supply = <&reg_pwr_3v3>;
+		DCVDD-supply = <&reg_pwr_3v3>;
+		SPKVDD1-supply = <&reg_pwr_5v>;
+		SPKVDD2-supply = <&reg_pwr_5v>;
+		wlf,gpio-cfg = <1 2>;
+		wlf,hp-cfg = <2 2 3>;
+		wlf,shared-lrclk;
+	};
+
+	expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "EXPOSURE_TRIG_IN1", "FLASH_OUT1",
+				  "INFO_TRIG_IN1", "CAM_SHUTTER1", "XVS1",
+				  "PWR1_TIME0", "PWR1_TIME1", "PWR1_TIME2",
+				  "EXPOSURE_TRIG_IN2", "FLASH_OUT2",
+				  "INFO_TRIG_IN2", "CAM_SHUTTER2", "XVS2",
+				  "PWR2_TIME0", "PWR2_TIME1", "PWR2_TIME2";
+	};
+
+	expander2: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio4>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "M2_DISABLE_N", "LED_EN", "", "",
+				  "", "", "", "USB_OTG_OC",
+				  "EXT_GPIO8", "EXT_GPIO9", "", "",
+				  "", "CSI1_PDB", "CSI2_PDB", "PD_FAULT";
+		pinctrl-0 = <&pinctrl_expander2_irq>;
+		pinctrl-names = "default";
+	};
+
+	usb_typec: usb-typec@67 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x67>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_hd3ss3220_irq>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&i2c_0 {
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	role-switch-default-mode = "peripheral";
+	srp-disable;
+	usb-role-switch;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+&iomuxc {
+	pinctrl_expander2_irq: expander2-irqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11		0x140 /* GPIO_P247 */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x16 /* DSI_RST */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD4__GPIO4_IO06		0x16 /* GPIO_P249 */
+			MX8MP_IOMUXC_SAI1_RXD5__GPIO4_IO07		0x16 /* GPIO_P251 */
+			MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09		0x16 /* GPIO_P255 */
+			MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16		0x16 /* DSI_BL_EN */
+			MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17		0x16 /* DSI_VDDEN */
+		>;
+	};
+
+	pinctrl_hd3ss3220_irq: hd3ss3220-irqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08		0x41 /* GPIO_P253 */
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi
new file mode 100644
index 000000000000..3f1e0837f349
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi
@@ -0,0 +1,786 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 TechNexion Ltd.
+ *
+ * Author: Ray Chang <ray.chang@technexion.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	i2c_0: i2c {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+		pinctrl-0 = <&pinctrl_i2c_brd_conf>;
+		pinctrl-names = "default";
+		scl-gpios = <&gpio4 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio4 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		eeprom: eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+		};
+	};
+
+	memory@40000000 {
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+		device_type = "memory";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+		startup-delay-us = <100>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		name = "rfkill";
+		pinctrl-0 = <&pinctrl_bt_ctrl>;
+		pinctrl-names = "default";
+		radio-type = "bluetooth";
+		shutdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	wl_reg_on: regulator-wl-reg-on {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <20000>;
+		pinctrl-0 = <&pinctrl_wifi_ctrl>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "WL_REG_ON";
+		startup-delay-us = <100>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	num-cs = <1>;
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	pinctrl-names = "default";
+};
+
+&eqos {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-names = "default";
+	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-assert-us = <35000>;
+			reset-deassert-us = <75000>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			realtek,clkout-disable;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0>;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <1>;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <2>;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <3>;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <4>;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+};
+
+&flexcan2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+
+		regulators {
+			BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK1";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_arm: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1025000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK2";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3600000>;
+				regulator-min-microvolt = <3000000>;
+				regulator-name = "BUCK4";
+			};
+
+			reg_buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "BUCK5";
+			};
+
+			BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "BUCK6";
+			};
+
+			LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "LDO1";
+			};
+
+			LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1890000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "LDO3";
+			};
+
+			LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/* I2C_B on EDMG */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-names = "default";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-names = "default";
+};
+
+&i2c4 {
+	/* I2C_A on EDMG */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-names = "default";
+};
+
+&i2c5 {
+	/* I2C_C on EDMG */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-names = "default";
+};
+
+&pcie {
+	pinctrl-0 = <&pinctrl_pcie>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio1 1 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-0 = <&pinctrl_pwm2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-0 = <&pinctrl_pwm3>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sai2 {
+	/* AUD_B on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-rates = <12288000>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	/* AUD_A on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-rates = <12288000>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	pinctrl-0 = <&pinctrl_sai3>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&uart1 {
+	/* BT */
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	/* UART_A on EDMG, console */
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart3 {
+	/* UART_C on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-0 = <&pinctrl_uart3>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	/* UART_B on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-0 = <&pinctrl_uart4>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc1 {
+	/* WIFI SDIO */
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC1>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&wl_reg_on>;
+	status = "okay";
+};
+
+&usdhc2 {
+	/* SD card on baseboard */
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	/* eMMC on SOM */
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-0 = <&pinctrl_wdog>;
+	pinctrl-names = "default";
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+	pinctrl-names = "default";
+
+	pinctrl_bt_ctrl: bt-ctrlgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05	0x41 /* BT_REG_ON */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x41 /* BT_WAKE_HOST */
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x40000
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x82
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x23
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09			0x19
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12			0x19
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x154
+			MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX		0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000019
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001a3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001a3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001a3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001a3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001a3
+			MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001a3
+		>;
+	};
+
+	pinctrl_i2c_brd_conf: i2cbrdconfgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x1c3 /* BRD_CONF_SCL, bitbang */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x1c3 /* BRD_CONF_SDA, bitbang */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x41 /* PCIE CLKREQ */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x41 /* PCIE WAKE */
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01	0x41 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x41
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT		0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT	0x116
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK	0xd6
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+			MX8MP_IOMUXC_UART4_RXD__UART2_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART2_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x140
+			MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS	0x140
+			MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+
+	pinctrl_wifi_ctrl: wifi-ctrlgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00	0x41 /* WL_REG_ON */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x41 /* WL_WAKE_HOST */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-imx-lvds-hdmi-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-evk-imx-lvds-hdmi-common.dtsi
new file mode 100644
index 000000000000..44b30e9b3fde
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-imx-lvds-hdmi-common.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	lvds-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J2";
+		type = "a";
+
+		port {
+			lvds2hdmi_connector_in: endpoint {
+				remote-endpoint = <&it6263_out>;
+			};
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtso
new file mode 100644
index 000000000000..4008d2fd36d6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi"
+
+&it6263 {
+	ports {
+		port@0 {
+			reg = <0>;
+			dual-lvds-odd-pixels;
+
+			it6263_lvds_link1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dual-lvds-even-pixels;
+
+			it6263_lvds_link2: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&it6263_lvds_link1>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&it6263_lvds_link2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi
new file mode 100644
index 000000000000..6eae7477abf8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-evk-imx-lvds-hdmi-common.dtsi"
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	it6263: hdmi@4c {
+		compatible = "ite,it6263";
+		reg = <0x4c>;
+		data-mapping = "jeida-24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_en>;
+		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		ivdd-supply = <&reg_buck5>;
+		ovdd-supply = <&reg_vext_3v3>;
+		txavcc18-supply = <&reg_buck5>;
+		txavcc33-supply = <&reg_vext_3v3>;
+		pvcc1-supply = <&reg_buck5>;
+		pvcc2-supply = <&reg_buck5>;
+		avcc-supply = <&reg_vext_3v3>;
+		anvdd-supply = <&reg_buck5>;
+		apvdd-supply = <&reg_buck5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@2 {
+				reg = <2>;
+
+				it6263_out: endpoint {
+					remote-endpoint = <&lvds2hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi.dtso
new file mode 100644
index 000000000000..9e11f261ad13
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi.dtso
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi"
+
+&it6263 {
+	ports {
+		port@0 {
+			reg = <0>;
+
+			it6263_lvds_link1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&it6263_lvds_link1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtso
new file mode 100644
index 000000000000..af2e73e36a1b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi"
+
+&it6263 {
+	ports {
+		port@0 {
+			reg = <0>;
+			dual-lvds-even-pixels;
+
+			it6263_lvds_link1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dual-lvds-odd-pixels;
+
+			it6263_lvds_link2: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&it6263_lvds_link2>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&it6263_lvds_link1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi
new file mode 100644
index 000000000000..8cc9d361c2a4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-evk-imx-lvds-hdmi-common.dtsi"
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	it6263: hdmi@4c {
+		compatible = "ite,it6263";
+		reg = <0x4c>;
+		data-mapping = "jeida-24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_en>;
+		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		ivdd-supply = <&reg_buck5>;
+		ovdd-supply = <&reg_vext_3v3>;
+		txavcc18-supply = <&reg_buck5>;
+		txavcc33-supply = <&reg_vext_3v3>;
+		pvcc1-supply = <&reg_buck5>;
+		pvcc2-supply = <&reg_buck5>;
+		avcc-supply = <&reg_vext_3v3>;
+		anvdd-supply = <&reg_buck5>;
+		apvdd-supply = <&reg_buck5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@2 {
+				reg = <2>;
+
+				it6263_out: endpoint {
+					remote-endpoint = <&lvds2hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi.dtso
new file mode 100644
index 000000000000..527a893a71b2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi.dtso
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi"
+
+&it6263 {
+	ports {
+		port@0 {
+			reg = <0>;
+
+			it6263_lvds_link1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&it6263_lvds_link1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso
new file mode 100644
index 000000000000..1b71890d43d5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	panel-lvds {
+		compatible = "koe,tx26d202vm0bwa";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_vext_3v3>;
+
+		panel-timing {
+			clock-frequency = <148500000>;
+			hactive = <1920>;
+			vactive = <1200>;
+			hfront-porch = <130>;
+			hback-porch = <70>;
+			hsync-len = <30>;
+			vfront-porch = <5>;
+			vback-porch = <5>;
+			vsync-len = <5>;
+			de-active = <1>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-odd-pixels;
+
+				panel_in_odd: endpoint {
+					remote-endpoint = <&ldb_lvds_ch0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dual-lvds-even-pixels;
+
+				panel_in_even: endpoint {
+					remote-endpoint = <&ldb_lvds_ch1>;
+				};
+			};
+		};
+	};
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_in_odd>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel_in_even>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index cc9d468b43ab..3730792daf50 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -16,6 +16,16 @@
 		stdout-path = &uart2;
 	};
 
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 100000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <100>;
+		power-supply = <&reg_per_12v>;
+		status = "disabled";
+	};
+
 	hdmi-connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -23,7 +33,7 @@
 
 		port {
 			hdmi_connector_in: endpoint {
-				remote-endpoint = <&adv7533_out>;
+				remote-endpoint = <&adv7535_out>;
 			};
 		};
 	};
@@ -46,12 +56,42 @@
 		      <0x1 0x00000000 0 0xc0000000>;
 	};
 
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "HDMI OUT";
+		type = "a";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	pcie0_refclk: pcie0-refclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 	};
 
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	reg_audio_pwr: regulator-audio-pwr {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -96,6 +136,15 @@
 		enable-active-high;
 	};
 
+	reg_per_12v: regulator-per-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "PER_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pca6416 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -107,35 +156,111 @@
 		enable-active-high;
 	};
 
-	sound {
+	reg_vext_3v3: regulator-vext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	audio_codec_bt_sco: audio-codec-bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	sound-bt-sco {
 		compatible = "simple-audio-card";
-		simple-audio-card,name = "wm8960-audio";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,frame-master = <&cpudai>;
-		simple-audio-card,bitclock-master = <&cpudai>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Speaker", "External Speaker",
-			"Microphone", "Mic Jack";
-		simple-audio-card,routing =
-			"Headphone Jack", "HP_L",
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&audio_codec_bt_sco 1>;
+		};
+	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		audio-asrc = <&easrc>;
+		audio-codec = <&wm8960>;
+		audio-cpu = <&sai3>;
+		audio-routing = "Headphone Jack", "HP_L",
 			"Headphone Jack", "HP_R",
-			"External Speaker", "SPK_LP",
-			"External Speaker", "SPK_LN",
-			"External Speaker", "SPK_RP",
-			"External Speaker", "SPK_RN",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
 			"LINPUT1", "Mic Jack",
 			"LINPUT3", "Mic Jack",
 			"Mic Jack", "MICB";
+		hp-det-gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		model = "wm8960-audio";
+		pinctrl-0 = <&pinctrl_hpdet>;
+		pinctrl-names = "default";
+	};
+
+	sound-xcvr {
+		compatible = "fsl,imx-audio-card";
+		model = "imx-audio-xcvr";
+
+		pri-dai-link {
+			link-name = "XCVR PCM";
 
-		cpudai: simple-audio-card,cpu {
-			sound-dai = <&sai3>;
+			cpu {
+				sound-dai = <&xcvr>;
+			};
 		};
+	};
 
-		simple-audio-card,codec {
-			sound-dai = <&wm8960>;
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_vdev0vring0: vdev0vring0@942f0000 {
+			reg = <0 0x942f0000 0 0x8000>;
+			no-map;
 		};
 
+		dsp_vdev0vring1: vdev0vring1@942f8000 {
+			reg = <0 0x942f8000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0buffer: vdev0buffer@94300000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x94300000 0 0x100000>;
+			no-map;
+		};
 	};
 };
 
@@ -169,6 +294,25 @@
 	cpu-supply = <&reg_arm>;
 };
 
+&aud2htx {
+	status = "okay";
+};
+
+&dsp_reserved {
+	status = "okay";
+};
+
+&dsp {
+	memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+			<&dsp_vdev0vring1>, <&dsp_reserved>;
+	status = "okay";
+};
+
+&easrc {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
+};
+
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
@@ -197,7 +341,6 @@
 
 	mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <5>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -299,6 +442,28 @@
 	status = "disabled";/* can2 pin conflict with pdm */
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -342,7 +507,7 @@
 				regulator-always-on;
 			};
 
-			BUCK5 {
+			reg_buck5: BUCK5 {
 				regulator-name = "BUCK5";
 				regulator-min-microvolt = <1650000>;
 				regulator-max-microvolt = <1950000>;
@@ -393,14 +558,16 @@
 
 	hdmi@3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
+		avdd-supply = <&reg_buck5>;
+		dvdd-supply = <&reg_buck5>;
+		pvdd-supply = <&reg_buck5>;
+		a2vdd-supply = <&reg_buck5>;
+		v3p3-supply = <&reg_vext_3v3>;
+		v1p2-supply = <&reg_buck5>;
 
 		ports {
 			#address-cells = <1>;
@@ -409,7 +576,7 @@
 			port@0 {
 				reg = <0>;
 
-				adv7533_in: endpoint {
+				adv7535_in: endpoint {
 					remote-endpoint = <&dsi_out>;
 				};
 			};
@@ -417,7 +584,7 @@
 			port@1 {
 				reg = <1>;
 
-				adv7533_out: endpoint {
+				adv7535_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
@@ -441,7 +608,11 @@
 		wlf,shared-lrclk;
 		wlf,hp-cfg = <3 2 3>;
 		wlf,gpio-cfg = <1 3>;
+		AVDD-supply = <&reg_audio_3v3>;
+		DBVDD-supply = <&reg_audio_1v8>;
+		DCVDD-supply = <&reg_audio_1v8>;
 		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
 	};
 
 	pca6416: gpio@20 {
@@ -493,6 +664,20 @@
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
+&micfil {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MP_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
 &mipi_dsi {
 	samsung,esc-clock-frequency = <10000000>;
 	status = "okay";
@@ -502,13 +687,17 @@
 			reg = <1>;
 
 			dsi_out: endpoint {
-				remote-endpoint = <&adv7533_in>;
+				remote-endpoint = <&adv7535_in>;
 				data-lanes = <1 2 3 4>;
 			};
 		};
 	};
 };
 
+&mu2 {
+	status = "okay";
+};
+
 &pcie_phy {
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 	clocks = <&pcie0_refclk>;
@@ -516,7 +705,7 @@
 	status = "okay";
 };
 
-&pcie {
+&pcie0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
@@ -524,6 +713,12 @@
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
@@ -542,6 +737,17 @@
 	status = "okay";
 };
 
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
@@ -628,7 +834,15 @@
 	status = "okay";
 };
 
+&xcvr {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
 &iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
 	pinctrl_audio_pwr_reg: audiopwrreggrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0xd6
@@ -718,6 +932,26 @@
 		>;
 	};
 
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000010
+		>;
+	};
+
+	pinctrl_hpdet: hpdetgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0xd6
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
@@ -746,6 +980,12 @@
 		>;
 	};
 
+	pinctrl_lvds_en: lvdsengrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x1c0
+		>;
+	};
+
 	pinctrl_pcie0: pcie0grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x60 /* open drain, pull up */
@@ -759,6 +999,16 @@
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK		0xd6
+			MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00	0xd6
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_PDM_BIT_STREAM01	0xd6
+			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_PDM_BIT_STREAM02	0xd6
+			MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_PDM_BIT_STREAM03	0xd6
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x000001c0
@@ -804,6 +1054,15 @@
 		>;
 	};
 
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00	0xd6
+		>;
+	};
+
 	pinctrl_sai3: sai3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts
new file mode 100644
index 000000000000..00614f5d58ea
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Mate";
+	compatible = "solidrun,imx8mp-hummingboard-mate",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		/delete-property/ ethernet1;
+	};
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts
new file mode 100644
index 000000000000..36cd452f1583
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Pro";
+	compatible = "solidrun,imx8mp-hummingboard-pro",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+		    <&m2_wwan_wake_pins>;
+};
+
+&pcie {
+	pinctrl-0 = <&m2_reset_pins>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
+
+&phy0 {
+	leds {
+		/* ADIN1300 LED_0 pin */
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/delete-node/ led@1;
+	};
+};
+
+&phy1 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* ADIN1300 LED_0 pin */
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi
new file mode 100644
index 000000000000..77402a3db9ef
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	sound-wm8904 {
+		compatible = "fsl,imx-audio-wm8904";
+		model = "audio-wm8904";
+		audio-cpu = <&sai3>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"AMIC", "MICBIAS",
+			"IN2R", "AMIC";
+	};
+};
+
+&i2c2 {
+	codec: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		AVDD-supply = <&v_1_8>;
+		CPVDD-supply = <&v_1_8>;
+		DBVDD-supply = <&v_3_3>;
+		DCVDD-supply = <&v_1_8>;
+		MICVDD-supply = <&v_3_3>;
+	};
+};
+
+&iomuxc {
+	sai3_pins: pinctrl-sai3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+		>;
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sai3_pins>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, <&clk IMX8MP_CLK_DUMMY>,
+		 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, <&clk IMX8MP_CLK_DUMMY>,
+		 <&clk IMX8MP_CLK_DUMMY>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi
new file mode 100644
index 000000000000..825ad6a2ba14
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &carrier_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led-0 {
+			label = "D30";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "D31";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-2 {
+			label = "D32";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-3 {
+			label = "D33";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-4 {
+			label = "D34";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	rfkill-mpcie-wifi {
+		/*
+		 * The mpcie connector only has USB,
+		 * therefore this rfkill is for cellular radios only.
+		 */
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mpcie_rfkill_pins>;
+		label = "mpcie radio";
+		radio-type = "wwan";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	vmmc: regulator-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc_pins>;
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <250>;
+	};
+
+	vbus1: regulator-vbus-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus1";
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus1_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vbus2: regulator-vbus-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus2";
+		gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus2_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	v_1_2: regulator-1-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	vmpcie {
+		/* supplies mpcie and m2 connectors */
+		compatible = "regulator-fixed";
+		regulator-name = "vmpcie";
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmpcie_pins>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+/* mikrobus spi */
+&ecspi2 {
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_spi_pins>;
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&mpcie_reset_pins>;
+	pinctrl-names = "default";
+
+	mpcie-reset-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "mpcie-reset";
+	};
+};
+
+&i2c3 {
+	carrier_eeprom: eeprom@57{
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+
+	carrier_rtc: rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+		abracon,tc-diode = "schottky";
+		abracon,tc-resistor = <3>;
+	};
+};
+
+&iomuxc {
+	csi_pins: pinctrl-csi-grp {
+		fsl,pins = <
+			/* Pin 24: STROBE */
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07		0x0
+		>;
+	};
+
+	led_pins: pinctrl-led-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x0
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x0
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23		0x0
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x0
+			MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28		0x0
+		>;
+	};
+
+	mikro_int_pins: pinctrl-mikro-int-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x0
+		>;
+	};
+
+	mikro_pwm_pins: pinctrl-mikro-pwm-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08		0x0
+		>;
+	};
+
+	mikro_rst_pins: pinctrl-mikro-rst-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30		0x0
+		>;
+	};
+
+	mikro_spi_pins: pinctrl-mikro-spi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0		0x40000
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+		>;
+	};
+
+	mikro_uart_pins: pinctrl-mikro-uart-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+		>;
+	};
+
+	mpcie_reset_pins: pinctrl-mpcie-reset-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x0
+		>;
+	};
+
+	mpcie_rfkill_pins: pinctrl-pcie-rfkill-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x20
+		>;
+	};
+
+	usb_hub_pins: pinctrl-usb-hub-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x0
+		>;
+	};
+
+	usdhc2_pins: pinctrl-usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	vbus1_pins: pinctrl-vbus-1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x20
+		>;
+	};
+
+	vbus2_pins: pinctrl-vbus-2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x20
+		>;
+	};
+
+	vmmc_pins: pinctrl-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x41
+		>;
+	};
+
+	vmpcie_pins: pinctrl-vmpcie-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x0
+		>;
+	};
+};
+
+&phy0 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* ADIN1300 LED_0 pin */
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/* ADIN1300 LINK_ST pin */
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* mikrobus uart */
+&uart3 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+	vbus-supply = <&vbus2>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&vbus1>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_hub_pins>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb4b4,6502", "usb4b4,6506";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&v_1_2>;
+		vdd2-supply = <&v_3_3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb4b4,6500", "usb4b4,6504";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&v_1_2>;
+		vdd2-supply = <&v_3_3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc2_pins>;
+	pinctrl-1 = <&usdhc2_100mhz_pins>;
+	pinctrl-2 = <&usdhc2_200mhz_pins>;
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	cap-power-off-card;
+	full-pwr-cycle;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi
new file mode 100644
index 000000000000..d7a999c0d7e0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&iomuxc {
+	hdmi_pins: pinctrl-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi
new file mode 100644
index 000000000000..8d8d8d2e3da8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	rfkill-m2-gnss {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&m2_gnss_rfkill_pins>;
+		label = "m.2 GNSS";
+		radio-type = "gps";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* M.2 is B-keyed, so w-disable is for WWAN */
+	rfkill-m2-wwan {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&m2_wwan_rfkill_pins>;
+		label = "m.2 WWAN";
+		radio-type = "wwan";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&iomuxc {
+	m2_gnss_rfkill_pins: pinctrl-m2-gnss-rfkill-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x20
+		>;
+	};
+
+	m2_reset_pins: pinctrl-m2-reset-grp {
+		fsl,pins = <
+			/*
+			 * 3.3V domain on SoC, set open-drain to ensure
+			 * 1.8V logic on connector
+			 */
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x20
+		>;
+	};
+
+	m2_wwan_rfkill_pins: pinctrl-m2-wwan-rfkill-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x20
+		>;
+	};
+
+	m2_wwan_wake_pins: pinctrl-m2-wwan-wake-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x20
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi
new file mode 100644
index 000000000000..46916ddc0533
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "c";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3f>, <0x3c>, <0x38>;
+		reg-names = "main", "edid", "cec", "packet";
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&v_1_8>;
+		dvdd-supply = <&v_1_8>;
+		pvdd-supply = <&v_1_8>;
+		a2vdd-supply = <&v_1_8>;
+		v3p3-supply = <&v_3_3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mini_hdmi_pins>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_from_dsim: endpoint {
+					remote-endpoint = <&dsim_to_adv7535>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&iomuxc {
+	mini_hdmi_pins: pinctrl-mini-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x0
+		>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	port@1 {
+		dsim_to_adv7535: endpoint {
+			remote-endpoint = <&adv7535_from_dsim>;
+			attach-bridge;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts
new file mode 100644
index 000000000000..d32844c3af05
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Pulse";
+	compatible = "solidrun,imx8mp-hummingboard-pulse",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &pcie_eth;
+	};
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&gpio1 {
+	pinctrl-0 = <&mpcie_reset_pins>, <&m2_reset_pins>;
+	pinctrl-names = "default";
+
+	m2-reset-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-reset";
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+		    <&m2_wwan_wake_pins>;
+
+	pcie_eth_pins: pinctrl-pcie-eth-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x0
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-0 = <&pcie_eth_pins>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	root@0,0 {
+		compatible = "pci16c3,abcd";
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* Intel i210 */
+		pcie_eth: ethernet@1,0 {
+			compatible = "pci8086,157b";
+			reg = <0x00010000 0 0 0 0>;
+		};
+	};
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts
new file mode 100644
index 000000000000..4ce5b799b6ab
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Ripple";
+	compatible = "solidrun,imx8mp-hummingboard-ripple",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		/delete-property/ ethernet1;
+	};
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts b/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
new file mode 100644
index 000000000000..f48cf22b423d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Y Soft
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+
+/ {
+	compatible = "ysoft,imx8mp-iota2-lumpy", "fsl,imx8mp";
+	model = "Y Soft i.MX8MPlus IOTA2 Lumpy board";
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm4 0 500000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		pinctrl-names = "default";
+
+		button-reset {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			label = "Factory RESET";
+			linux,code = <BTN_0>;
+		};
+	};
+
+	reg_usb_host: regulator-usb-host {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_usb_host_vbus>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-host";
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	memory@40000000 {
+		reg = <0x0 0x40000000 0 0x80000000>,
+		      <0x1 0x00000000 0 0x80000000>;
+		device_type = "memory";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&eqos {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&gpio3>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&fec {
+	fsl,magic-packet;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			reg = <0>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&gpio3>;
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio1>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+
+		regulators {
+			BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK1";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_arm: BUCK2 {
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1025000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK2";
+				regulator-ramp-delay = <3125>;
+			};
+
+			BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3600000>;
+				regulator-min-microvolt = <3000000>;
+				regulator-name = "BUCK4";
+			};
+
+			BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "BUCK5";
+			};
+
+			BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "BUCK6";
+			};
+
+			LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "LDO1";
+			};
+
+			LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1890000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "LDO3";
+			};
+
+			LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "LDO4";
+			};
+
+			LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+};
+
+&pwm4 {
+	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb_host>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-0 = <&pinctrl_wdog>;
+	pinctrl-names = "default";
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+		>;
+	};
+
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x10
+			MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22		0x10
+		>;
+	};
+
+	pinctrl_ethphy1: ethphy1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x10
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x10
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x16
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x16
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x16
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x16
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x16
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07	0x80
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x1c0
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT	0x102
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x0
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x0
+		>;
+	};
+
+	pinctrl_usb_host_vbus: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x0
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
new file mode 100644
index 000000000000..614b4ce330b1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp-kontron-osm-s.dtsi"
+
+/ {
+	model = "Kontron BL i.MX8MP OSM-S";
+	compatible = "kontron,imx8mp-bl-osm-s", "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+	};
+
+	extcon_usbc: usbc {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_id>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 5000 0>;
+	};
+
+	reg_vcc_panel: regulator-vcc-panel {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC_PANEL";
+	};
+};
+
+&ecspi2 {
+	status = "okay";
+
+	eeram@0 {
+		compatible = "microchip,48l640";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&eqos {	/* Second ethernet (OSM-S ETH_B) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id4f51.e91b";
+			reg = <1>;
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fec { /* First ethernet (OSM-S ETH_A) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_rgmii>;
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id4f51.e91b";
+			reg = <1>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ *   SDIO_A_PWR_EN -> CAN_ADDR2
+ *   SDIO_A_WP     -> CAN_ADDR3
+ */
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+	gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "",
+			  "SDIO_A_CD", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+			  "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "CAN_ADDR2",
+			  "CAN_ADDR3";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_0      -> IO_EXP_INT
+ *   GPIO_B_1      -> IO_EXP_RST
+ */
+&gpio3 {
+	gpio-line-names = "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_A_PERST", "SDIO_B_D5",
+			  "SDIO_B_D6", "SDIO_B_D7", "SPI_A_WP", "SPI_A_HOLD",
+			  "UART_B_RTS", "UART_B_CTS", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "SDIO_B_WP", "SDIO_B_D4",
+			  "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "IO_EXP_INT",
+			  "IO_EXP_RST", "", "BOOT_SEL0", "BOOT_SEL1",
+			  "", "", "SDIO_B_CD", "SDIO_B_PWR_EN",
+			  "HDMI_CEC", "HDMI_HPD";
+};
+
+/*
+ * Rename SoM signals according to board usage and remove labels for unsed pins:
+ *   GPIO_A_6      -> TFT_RESET
+ *   GPIO_A_7      -> TFT_STBY
+ *   GPIO_B_3      -> CSI_ENABLE
+ *   GPIO_B_2      -> USB_HUB_RST
+ */
+&gpio4 {
+	gpio-line-names = "", "", "", "",
+			  "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
+			  "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
+			  "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
+			  "ETH_A_TX_EN", "ETH_A_TX_CLK", "CSI_ENABLE", "",
+			  "USB_HUB_RST", "TFT_RESET", "CAN_A_TX", "UART_A_CTS",
+			  "UART_A_RTS", "CAN_A_RX", "CAN_B_TX", "CAN_B_RX",
+			  "TFT_STBY", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ *   SPI_A_SDI	-> CAN_ADDR0
+ *   SPI_A_SDO	-> CAN_ADDR1
+ */
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5>;
+	gpio-line-names = "I2S_BITCLK", "I2S_A_DATA_OUT", "I2S_MCLK", "PWM_2",
+			  "PWM_1", "PWM_0", "SPI_A_SCK", "CAN_ADDR1",
+			  "CAN_ADDR0", "SPI_A_CS0", "SPI_B_SCK", "SPI_B_SDO",
+			  "SPI_B_SDI", "SPI_B_CS0", "I2C_A_SCL", "I2C_A_SDA",
+			  "I2C_B_SCL", "I2C_B_SDA", "PCIE_SMCLK", "PCIE_SMDAT",
+			  "I2C_CAM_SCL", "I2C_CAM_SDA", "UART_A_RX", "UART_A_TX",
+			  "UART_C_RX", "UART_C_TX", "UART_CON_RX", "UART_CON_TX",
+			  "UART_B_RX", "UART_B_TX";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	gpio_expander_dio: io-expander@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "DIO1_OUT","DIO1_IN", "DIO2_OUT","DIO2_IN",
+				  "DIO3_OUT","DIO3_IN", "DIO4_OUT","DIO4_IN";
+		interrupt-parent = <&gpio3>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&reg_usdhc2_vcc {
+	status = "disabled";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	extcon = <&extcon_usbc>;
+	usb-role-switch;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dr_mode = "host";
+	status = "okay";
+
+	usb-hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		reset-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x46
+		>;
+	};
+
+	pinctrl_ethphy1: ethphy1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x46
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x46
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20			0x46
+		>;
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MOSI__GPIO5_IO07		0x46 /* CAN_ADR0 */
+			MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08		0x46 /* CAN_ADR1 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
new file mode 100644
index 000000000000..a3cba41d2b53
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2023 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-pinfunc.h"
+
+&{/} {
+	model = "Kontron DL i.MX8MP OSM-S";
+	compatible = "kontron,imx8mp-bl-osm-s", "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <100>;
+	};
+
+	panel {
+		compatible = "jenson,bl-jt60050-01a", "panel-lvds";
+		backlight = <&backlight>;
+		data-mapping = "vesa-24";
+		enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_vcc_panel>;
+		height-mm = <86>;
+		width-mm = <154>;
+
+		panel-timing {
+			clock-frequency = <50000000>;
+			hactive = <1024>;
+			hback-porch = <160>;
+			hfront-porch = <160>;
+			hsync-len = <1>;
+			vactive = <600>;
+			vback-porch = <23>;
+			vfront-porch = <12>;
+			vsync-len = <1>;
+		};
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>, <&pinctrl_panel_stby>;
+
+	panel-rst-hog {
+		gpio-hog;
+		gpios = <21 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "panel-reset";
+	};
+
+	panel-stby-hog {
+		gpio-hog;
+		gpios = <28 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "panel-standby";
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <6 8>;
+		irq-gpios = <&gpio1 6 0>;
+		AVDD28-supply = <&reg_vcc_panel>;
+		VDDIO-supply = <&reg_vcc_panel>;
+		reset-gpios = <&gpio1 7 0>;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&ldb_lvds_ch0 {
+	remote-endpoint = <&panel_in_lvds0>;
+};
+
+&lvds_bridge {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_panel_stby: panelstbygrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x19
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
new file mode 100644
index 000000000000..b97bfeb1c30f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
@@ -0,0 +1,909 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Kontron OSM-S i.MX8MP";
+	compatible = "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/*
+		 * There are multiple SoM flavors with different DDR sizes.
+		 * The smallest is 1GB. For larger sizes the bootloader will
+		 * update the reg property.
+		 */
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VBUS_USB_A";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_vbus>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VBUS_USB_B";
+	};
+
+	reg_usdhc2_vcc: regulator-usdhc2-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_A";
+	};
+
+	reg_usdhc3_vcc: regulator-usdhc3-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc3_vcc>;
+		gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_B";
+	};
+
+	reg_vdd_carrier: regulator-vdd-carrier {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_CARRIER";
+
+		regulator-state-standby {
+			regulator-on-in-suspend;
+		};
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+
+		regulator-state-disk {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ecspi1 { /* OSM-S SPI_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi2 { /* OSM-S SPI_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+};
+
+&flexcan1 { /* OSM-S CAN_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&flexcan2 { /* OSM-S CAN_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "GPIO_A_0", "GPIO_A_1", "", "",
+			  "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
+			  "GPIO_A_5", "USB_B_EN", "USB_A_ID", "USB_B_ID",
+			  "USB_A_EN", "USB_A_OC","CAM_MCK", "USB_B_OC",
+			  "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD3", "ETH_B_TXD2",
+			  "ETH_B_TXD1", "ETH_B_TXD0", "ETH_B_TX_EN", "ETH_B_TX_CLK",
+			  "ETH_B_RX_DV", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1",
+			  "ETH_B_RXD2", "ETH_B_RXD3";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "",
+			  "SDIO_A_CD", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+			  "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN",
+			  "SDIO_A_WP";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+	gpio-line-names = "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_A_PERST", "SDIO_B_D5",
+			  "SDIO_B_D6", "SDIO_B_D7", "SPI_A_WP", "SPI_A_HOLD",
+			  "UART_B_RTS", "UART_B_CTS", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "SDIO_B_WP", "SDIO_B_D4",
+			  "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "GPIO_B_0",
+			  "GPIO_B_1", "", "BOOT_SEL0", "BOOT_SEL1",
+			  "", "", "SDIO_B_CD", "SDIO_B_PWR_EN",
+			  "HDMI_CEC", "HDMI_HPD";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	gpio-line-names = "GPIO_B_5", "GPIO_B_6", "GPIO_B_7", "GPIO_C_0",
+			  "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
+			  "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
+			  "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
+			  "ETH_A_TX_EN", "ETH_A_TX_CLK", "GPIO_B_3", "GPIO_B_4",
+			  "GPIO_B_2", "GPIO_A_6", "CAN_A_TX", "UART_A_CTS",
+			  "UART_A_RTS", "CAN_A_RX", "CAN_B_TX", "CAN_B_RX",
+			  "GPIO_A_7", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+};
+
+&gpio5 {
+	gpio-line-names = "I2S_BITCLK", "I2S_A_DATA_OUT", "I2S_MCLK", "PWM_2",
+			  "PWM_1", "PWM_0", "SPI_A_SCK", "SPI_A_SDO",
+			  "SPI_A_SDI", "SPI_A_CS0", "SPI_B_SCK", "SPI_B_SDO",
+			  "SPI_B_SDI", "SPI_B_CS0", "I2C_A_SCL", "I2C_A_SDA",
+			  "I2C_B_SCL", "I2C_B_SDA", "PCIE_SMCLK", "PCIE_SMDAT",
+			  "I2C_CAM_SCL", "I2C_CAM_SDA", "UART_A_RX", "UART_A_TX",
+			  "UART_C_RX", "UART_C_TX", "UART_CON_RX", "UART_CON_TX",
+			  "UART_B_RX", "UART_B_TX";
+};
+
+&i2c1 { /* OSM-S I2C_A */
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c2 { /* OSM-S I2C_B */
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c3 { /* OSM-S PCIe SMDAT/SMCLK */
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c4 { /* OSM-S I2C_CAM */
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c5 { /* PMIC, EEPROM, RTC */
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		nxp,i2c-lt-enable;
+
+		regulators {
+			reg_vdd_soc: BUCK1 { /* dual phase with BUCK3 */
+				regulator-name = "+0V8_VDD_SOC (BUCK1)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "+0V9_VDD_ARM (BUCK2)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "+3V3 (BUCK4)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "+1V8 (BUCK5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda: LDO3 {
+				regulator-name = "+1V8_VDDA (LDO3)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-name = "NVCC_SD (LDO5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "onnn,n24s64b", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		size = <8192>;
+		num-addresses = <1>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio3 24 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pwm1 { /* OSM-S PWM_0 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm2 { /* OSM-S PWM_1 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&pwm3 { /* OSM-S PWM_2 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&sai3 { /* OSM-S I2S_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+};
+
+&uart1 { /* OSM-S UART_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 { /* OSM-S UART_C */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&uart3 { /* OSM-S UART_CON */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 { /* OSM-S UART_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&usb3_0 { /* OSM-S USB_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_oc>;
+	fsl,over-current-active-low;
+};
+
+&usb3_1 { /* OSM-S USB_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2_oc>;
+	fsl,over-current-active-low;
+};
+
+&usdhc1 { /* eMMC */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 { /* OSM-S SDIO_A */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>, <&pinctrl_usdhc2_wp>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>, <&pinctrl_usdhc2_wp>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>, <&pinctrl_usdhc2_wp>;
+	vmmc-supply = <&reg_usdhc2_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+};
+
+&usdhc3 { /* OSM-S SDIO_B */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>;
+	vmmc-supply = <&reg_usdhc3_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_csi_mck: csimckgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1		0x59 /* CAM_MCK */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x44 /* SPI_A_SDI_(IO0) */
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x44 /* SPI_A_SDO_(IO1) */
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x44 /* SPI_A_SCK */
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40 /* SPI_A_CS0# */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x44 /* SPI_B_SDI */
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x44 /* SPI_B_SDO */
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x44 /* SPI_B_SCK */
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40 /* SPI_B_CS0# */
+		>;
+	};
+
+	pinctrl_enet_rgmii: enetrgmiigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3 /* ETH_MDC */
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3 /* ETH_MDIO */
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91 /* ETH_A_(S)(R)(G)MII_RXD0 */
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91 /* ETH_A_(S)(R)(G)MII_RXD1 */
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91 /* ETH_A_(R)(G)MII_RXD2 */
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91 /* ETH_A_(R)(G)MII_RXD3 */
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91 /* ETH_A_(R)(G)MII_RX_CLK */
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f /* ETH_A_(S)(R)(G)MII_TXD0 */
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f /* ETH_A_(S)(R)(G)MII_TXD1 */
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f /* ETH_A_(S)(R)(G)MII_TXD2 */
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f /* ETH_A_(S)(R)(G)MII_TXD3 */
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f /* ETH_A_(R)(G)MII_TX_CLK */
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_eqos_rgmii: eqosrgmiigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3 /* ETH_B_MDC */
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3 /* ETH_B_MDIO */
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91 /* ETH_B_(S)(R)(G)MII_RXD0 */
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91 /* ETH_B_(S)(R)(G)MII_RXD1 */
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91 /* ETH_B_(R)(G)MII_RXD2 */
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91 /* ETH_B_(R)(G)MII_RXD3 */
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 /* ETH_B_(R)(G)MII_RX_CLK */
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91 /* ETH_B_(R)(G)MII_RX_DV(_ER) */
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f /* ETH_B_(S)(R)(G)MII_TXD0 */
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f /* ETH_B_(S)(R)(G)MII_TXD1 */
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f /* ETH_B_(S)(R)(G)MII_TXD2 */
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f /* ETH_B_(S)(R)(G)MII_TXD3 */
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f /* ETH_B_(R)(G)MII_TX_CLK */
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f /* ETH_B_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__CAN1_TX			0x154 /* CAN_A_TX */
+			MX8MP_IOMUXC_SAI2_TXC__CAN1_RX			0x154 /* CAN_A_RX */
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX			0x154 /* CAN_B_TX */
+			MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX			0x154 /* CAN_B_RX */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x19 /* GPIO_A_0 */
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x19 /* GPIO_A_1 */
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x19 /* GPIO_A_2 */
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x19 /* GPIO_A_3 */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x19 /* GPIO_A_4 */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x19 /* GPIO_A_5 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01		0x19 /* GPIO_A_7 */
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x19 /* GPIO_B_0 */
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x19 /* GPIO_B_1 */
+			MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22		0x19 /* BOOT_SEL0# */
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23		0x19 /* BOOT_SEL1# */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x19 /* GPIO_B_5 */
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x19 /* GPIO_B_6 */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x19 /* GPIO_B_7 */
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x19 /* GPIO_C_0 */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x19 /* GPIO_B_3 */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x19 /* GPIO_B_4 */
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x19 /* GPIO_B_2 */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x19 /* GPIO_A_6 */
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x19 /* HDMI_HPD */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x40000084 /* I2C_A_SCL */
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x40000084 /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x84 /* I2C_A_SCL */
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x84 /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x40000084 /* I2C_B_SCL */
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x40000084 /* I2C_B_SDA */
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x84 /* I2C_B_SCL */
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x84 /* I2C_B_SDA */
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x40000084 /* PCIe_SMCLK */
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x40000084 /* PCIe_SMDAT */
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x84 /* PCIe_SMCLK */
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x84 /* PCIe_SMDAT */
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x40000084 /* I2C_CAM_SCL/CSI_TX_P */
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x40000084 /* I2C_CAM_SDA/CSI_TX_N */
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20		0x84 /* I2C_CAM_SCL/CSI_TX_P */
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21		0x84 /* I2C_CAM_SDA/CSI_TX_N */
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL		0x40000084
+			MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA		0x40000084
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x84
+			MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25		0x84
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__PCIE_CLKREQ_B		0x19 /* PCIe_CLKREQ# */
+			MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02		0x19 /* PCIe_A_PERST# */
+			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00		0x19 /* PCIe_WAKE# */
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16		0x19 /* PCIe_SM_ALERT */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x1c0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT		0x6 /* PWM_0 */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__PWM2_OUT			0x6 /* PWM_1 */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT			0x6 /* PWM_2 */
+		>;
+	};
+
+	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x19 /* USB_A_EN */
+		>;
+	};
+
+	pinctrl_reg_usb2_vbus: regusb2vbusgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x19 /* USB_B_EN */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x19 /* SDIO_A_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_usdhc3_vcc: regusdhc3vccgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0x19 /* SDIO_B_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_vdd_carrier: regvddcarriergrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0x19 /* CARRIER_PWR_EN */
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24		0x1c0
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00		0xd6 /* I2S_A_DATA_IN */
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00		0xd6 /* I2S_A_DATA_OUT */
+			MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01		0xd6 /* I2S_B_DATA_IN */
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_DATA01		0xd6 /* I2S_B_DATA_OUT */
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK		0xd6 /* I2S_MCLK */
+			MX8MP_IOMUXC_NAND_DATA01__AUDIOMIX_SAI3_TX_SYNC		0xd6 /* I2S_LRCLK */
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK		0xd6 /* I2S_BITCLK */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x140 /* UART_A_RX */
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x140 /* UART_A_TX */
+			MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS		0x140 /* UART_A_CTS */
+			MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS		0x140 /* UART_A_RTS */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x140 /* UART_C_RX */
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x140 /* UART_C_TX */
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x140 /* UART_CON_RX */
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x140 /* UART_CON_TX */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA00__UART4_DCE_RX		0x140 /* UART_B_RX */
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x140 /* UART_B_TX */
+			MX8MP_IOMUXC_NAND_DATA03__UART4_DCE_RTS		0x140 /* UART_B_CTS */
+			MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS		0x140 /* UART_B_RTS */
+		>;
+	};
+
+	pinctrl_usb1_id: usb1idgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x1c4 /* USB_A_ID */
+		>;
+	};
+
+	pinctrl_usb1_oc: usb1ocgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x1c0 /* USB_A_OC# */
+		>;
+	};
+
+	pinctrl_usb2_id: usb2idgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__USB2_OTG_ID		0x1c4 /* USB_B_ID */
+		>;
+	};
+
+	pinctrl_usb2_oc: usb2ocgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC		0x1c0 /* USB_B_OC# */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
+			MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4		0x1d0
+			MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5		0x1d0
+			MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6		0x1d0
+			MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7		0x1d0
+			MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B	0x141
+			MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
+			MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4		0x1d4
+			MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5		0x1d4
+			MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6		0x1d4
+			MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7		0x1d4
+			MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B	0x141
+			MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
+			MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4		0x1d6
+			MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5		0x1d6
+			MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6		0x1d6
+			MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7		0x1d6
+			MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B	0x141
+			MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE		0x196
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190 /* SDIO_A_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0 /* SDIO_A_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0 /* SDIO_A_D0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0 /* SDIO_A_D1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0 /* SDIO_A_D2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0 /* SDIO_A_D3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x400001d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194 /* SDIO_A_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4 /* SDIO_A_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4 /* SDIO_A_D0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4 /* SDIO_A_D1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4 /* SDIO_A_D2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4 /* SDIO_A_D3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x400001d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196 /* SDIO_A_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6 /* SDIO_A_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6 /* SDIO_A_D0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6 /* SDIO_A_D1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6 /* SDIO_A_D2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6 /* SDIO_A_D3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x400001d0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x19 /* SDIO_A_CD# */
+		>;
+	};
+
+	pinctrl_usdhc2_wp: usdhc2wpgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190 /* SDIO_B_CLK */
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0 /* SDIO_B_CMD */
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0 /* SDIO_B_D0 */
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0 /* SDIO_B_D1 */
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0 /* SDIO_B_D2 */
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0 /* SDIO_B_D3 */
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0 /* SDIO_B_D4 */
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0 /* SDIO_B_D5 */
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0 /* SDIO_B_D6 */
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194 /* SDIO_B_CLK */
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4 /* SDIO_B_CMD */
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4 /* SDIO_B_D0 */
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4 /* SDIO_B_D1 */
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4 /* SDIO_B_D2 */
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4 /* SDIO_B_D3 */
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4 /* SDIO_B_D4 */
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4 /* SDIO_B_D5 */
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4 /* SDIO_B_D6 */
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196 /* SDIO_B_CLK */
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6 /* SDIO_B_CMD */
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6 /* SDIO_B_D0 */
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6 /* SDIO_B_D1 */
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6 /* SDIO_B_D2 */
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6 /* SDIO_B_D3 */
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6 /* SDIO_B_D4 */
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6 /* SDIO_B_D5 */
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6 /* SDIO_B_D6 */
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_gpio: usdhc3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0x19 /* SDIO_B_CD# */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x19 /* SDIO_B_WP */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts
new file mode 100644
index 000000000000..2173a36ff691
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-kontron-smarc.dtsi"
+
+/ {
+	model = "Kontron SMARC Eval Carrier with i.MX8MP";
+	compatible = "kontron,imx8mp-smarc-eval-carrier", "kontron,imx8mp-smarc",
+		     "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <100>;
+		enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usbc: usbc {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_id>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "imx8mp-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Headphone Jack", "MICBIAS",
+			"IN1L", "Headphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+			sound-dai = <&wm8904>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+	};
+
+	regulator_can0: can0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "can0_en";
+		gpio = <&expander_pm_out 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	regulator_can1: can1-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "can1_en";
+		gpio = <&expander_pm_out 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ecspi1 {
+	status = "okay";
+};
+
+&ecspi2 {
+	status = "okay";
+};
+
+&eqos {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&flexcan1 {
+	xceiver-supply = <&regulator_can0>;
+	status = "okay";
+};
+
+&flexcan2 {
+	xceiver-supply = <&regulator_can1>;
+	status = "okay";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	expander_pm_out: io-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "EN_5V0_S0", "EN_3V3_S0", "EN_1V8_S0",
+				  "EN_1V5_S0", "EN_12V0_PCIE", "EN_3V3_S5",
+				  "CAN0_EN", "CAN1_EN";
+	};
+
+	expander_pm_in: io-expander@24 {
+		compatible = "nxp,pca9554";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "PG_5V0_3V3_S0", "PG_5V0_3V3_S5", "PG_1V8_S0",
+				  "PG_1V5_S0", "PG_BKLT_5V", "PG_BKLT_12V";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_vdd_1v8>;
+		CPVDD-supply = <&reg_vdd_1v8>;
+		DBVDD-supply = <&reg_vdd_1v8>;
+		DCVDD-supply = <&reg_vdd_1v8>;
+		MICVDD-supply = <&reg_vdd_3v3>;
+	};
+
+	expander_audio: io-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "I2C_SEL_CODEC_LOOPBACK", "FPAH_PRESENCE",
+				  "CODEC_OPTION_SW_I2S_HDA", "LINE_IN_JD",
+				  "LINE_OUT_JD", "HEADPHONES_JD", "MIC_JD";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	extcon = <&extcon_usbc>;
+	usb-role-switch;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	vmmc-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi
new file mode 100644
index 000000000000..1e831d9b8a93
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-kontron-osm-s.dtsi"
+
+/ {
+	model = "Kontron SMARC i.MX8MP";
+	compatible = "kontron,imx8mp-smarc", "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ecspi1 {
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+&eqos {	/* Second ethernet (OSM-S ETH_B) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id4f51.e91b";
+			reg = <1>;
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fec { /* First ethernet (OSM-S ETH_A) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_rgmii>;
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&ethphy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id4f51.e91b";
+			reg = <1>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ *   GPIO_A_2 -> GPIO0
+ *   GPIO_A_3 -> GPIO1
+ *   GPIO_A_4 -> GPIO2
+ *   GPIO_A_5 -> GPIO3
+ *   USB_B_EN -> n.a.
+ *   USB_B_ID -> n.a.
+ *   USB_B_OC -> n.a.
+ */
+&gpio1 {
+	gpio-line-names = "GPIO_A_0", "GPIO_A_1", "", "",
+			  "", "GPIO0", "GPIO1", "GPIO2",
+			  "GPIO3", "", "USB_A_ID", "",
+			  "USB_A_EN", "USB_A_OC","CAM_MCK", "",
+			  "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD3", "ETH_B_TXD2",
+			  "ETH_B_TXD1", "ETH_B_TXD0", "ETH_B_TX_EN", "ETH_B_TX_CLK",
+			  "ETH_B_RX_DV", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1",
+			  "ETH_B_RXD2", "ETH_B_RXD3";
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ *   SDIO_A_CD -> SDIO_CD
+ *   SDIO_A_CLK -> SDIO_CK
+ *   SDIO_A_CMD -> SDIO_CMD
+ *   SDIO_A_D0 -> SDIO_D0
+ *   SDIO_A_D1 -> SDIO_D1
+ *   SDIO_A_D2 -> SDIO_D2
+ *   SDIO_A_D3 -> SDIO_D3
+ *   SDIO_A_PWR_EN -> SDIO_PWR_EN
+ *   SDIO_A_WP -> SDIO_WP
+ */
+&gpio2 {
+	gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "",
+			  "SDIO_CD", "SDIO_CK", "SDIO_CMD", "SDIO_D0",
+			  "SDIO_D1", "SDIO_D2", "SDIO_D3", "SDIO_PWR_EN",
+			  "SDIO_WP";
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ *   PCIE_CLKREQ -> PCIE_A_CKREQ
+ *   PCIE_A_PERST -> PCIE_A_RST
+ *   SDIO_B_D5 -> n.a.
+ *   SDIO_B_D6 -> n.a.
+ *   SDIO_B_D7 -> n.a.
+ *   SPI_A_WP -> n.a.
+ *   SPI_A_HOLD -> n.a.
+ *   UART_B_RTS -> SER2_RTS
+ *   UART_B_CTS -> SER2_CTS
+ *   SDIO_B_D0 -> GPIO8
+ *   SDIO_B_D1 -> GPIO9
+ *   SDIO_B_D2 -> GPIO10
+ *   SDIO_B_D3 -> GPIO11
+ *   SDIO_B_WP -> n.a.
+ *   SDIO_B_D4 -> n.a.
+ *   PCIE_SM_ALERT -> SMB_ALERT
+ *   SDIO_B_CLK -> GPIO6
+ *   SDIO_B_CMD -> GPIO7
+ *   GPIO_B_0 -> LCD0_BKLT_EN
+ *   GPIO_B_1 -> LCD1_BKLT_EN
+ *   BOOT_SEL0 -> BOOT_SEL2
+ *   SDIO_B_CD -> n.a.
+ *   SDIO_B_PWR_EN -> n.a.
+ *   HDMI_CEC -> n.a.
+ *   SDIO_B_PWR_EN -> n.a.
+ */
+&gpio3 {
+	pinctrl-0 = <&pinctrl_gpio3>, <&pinctrl_gpio3_smarc>;
+	gpio-line-names = "PCIE_WAKE", "PCIE_A_CKREQ", "PCIE_A_RST", "",
+			  "", "", "", "",
+			  "SER2_RTS", "SER2_CTS", "GPIO8", "GPIO9",
+			  "GPIO10", "GPIO11", "", "",
+			  "SMB_ALERT", "GPIO6", "GPIO7", "LCD0_BKLT_EN",
+			  "LCD1_BKLT_EN", "", "BOOT_SEL2", "BOOT_SEL1",
+			  "", "", "", "",
+			  "", "HDMI_HPD";
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ *   GPIO_B_5 -> n.a.
+ *   GPIO_B_6 -> n.a.
+ *   GPIO_B_7 -> n.a.
+ *   GPIO_C_0 -> LED
+ *   GPIO_B_3 -> ETH2_INT
+ *   GPIO_B_4 -> USB_HUB_RST
+ *   GPIO_B_2 -> ETH1_INT
+ *   GPIO_A_6 -> GPIO4
+ *   CAN_A_TX -> CAN0_TX
+ *   UART_A_CTS -> SER0_CTS
+ *   UART_A_RTS -> SER0_RTS
+ *   CAN_A_RX -> CAN0_RX
+ *   CAN_B_TX -> CAN1_TX
+ *   CAN_B_RX -> CAN1_RX
+ *   GPIO_A_7 -> TEST
+ *   I2S_A_DATA_IN -> I2S0_SDIN
+ *   I2S_LRCLK -> I2S0_LRCK
+ */
+&gpio4 {
+	gpio-line-names = "", "", "", "LED",
+			  "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
+			  "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
+			  "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
+			  "ETH_A_TX_EN", "ETH_A_TX_CLK", "ETH2_INT", "USB_HUB_RST",
+			  "ETH1_INT", "GPIO4", "CAN0_TX", "SER0_CTS",
+			  "SER0_RTS", "CAN0_RX", "CAN1_TX", "CAN1_RX",
+			  "TEST", "CARRIER_PWR_EN", "I2S0_SDIN", "I2S0_LRCK";
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ *   I2S_BITCLK -> I2S0_CK
+ *   I2S_A_DATA_OUT -> I2S0_SDOUT
+ *   I2S_MCLK -> AUDIO_MCK
+ *   PWM_2 -> GPIO5
+ *   PWM_1 -> LCD1_BKLT_PWM
+ *   PWM_0 -> LCD0_BKLT_PWM
+ *   SPI_A_SCK -> SPI0_CK
+ *   SPI_A_SDO -> SPI0_DO
+ *   SPI_A_SDI -> SPI0_DIN
+ *   SPI_A_CS0 -> SPI0_CS0
+ *   SPI_B_SCK -> ESPI_CK
+ *   SPI_B_SDO -> ESPI_IO_0
+ *   SPI_B_SDI -> ESPI_IO_1
+ *   SPI_B_CS0 -> ESPI_CS0
+ *   I2C_A_SCL -> I2C_PM_CK
+ *   I2C_A_SDA -> I2C_PM_DAT
+ *   I2C_B_SCL -> I2C_GP_CK
+ *   I2C_B_SDA -> I2C_GP_DAT
+ *   PCIE_SMCLK -> HDMI_CTRL_CK
+ *   PCIE_SMDAT -> HDMI_CTRL_DAT
+ *   I2C_CAM_SCL -> I2C_CAM1_CK
+ *   I2C_CAM_SDA -> I2C_CAM1_DAT
+ *   UART_A_RX -> SER0_RX
+ *   UART_A_TX -> SER0_TX
+ *   UART_C_RX -> SER3_RX
+ *   UART_C_TX -> SER3_TX
+ *   UART_CON_RX -> SER1_RX
+ *   UART_CON_TX -> SER1_TX
+ *   UART_B_RX -> SER2_RX
+ *   UART_B_TX -> SER2_TX
+ */
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5_smarc>;
+	gpio-line-names = "I2S0_CK", "I2S0_SDOUT", "AUDIO_MCK", "GPIO5",
+			  "LCD1_BKLT_PWM", "LCD0_BKLT_PWM", "SPI0_CK", "SPI0_DO",
+			  "SPI0_DIN", "SPI0_CS0", "ESPI_CK", "ESPI_IO_0",
+			  "ESPI_IO_1", "ESPI_CS0", "I2C_PM_CK", "I2C_PM_DAT",
+			  "I2C_GP_CK", "I2C_GP_DAT", "HDMI_CTRL_CK", "HDMI_CTRL_DAT",
+			  "I2C_CAM1_CK", "I2C_CAM1_DAT", "SER0_RX", "SER0_TX",
+			  "SER3_RX", "SER3_TX", "SER1_RX", "SER1_TX",
+			  "SER2_RX", "SER2_TX";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb-hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+};
+
+&iomuxc {
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x46
+		>;
+	};
+
+	pinctrl_ethphy1: ethphy1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x46
+		>;
+	};
+
+	pinctrl_gpio3_smarc: gpio3smarcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA04__GPIO3_IO10		0x1d0 /* SMARC GPIO8 */
+			MX8MP_IOMUXC_NAND_DATA05__GPIO3_IO11		0x1d0 /* SMARC GPIO9 */
+			MX8MP_IOMUXC_NAND_DATA06__GPIO3_IO12		0x1d0 /* SMARC GPIO10 */
+			MX8MP_IOMUXC_NAND_DATA07__GPIO3_IO13		0x1d0 /* SMARC GPIO11 */
+			MX8MP_IOMUXC_NAND_WE_B__GPIO3_IO17		0x190 /* SMARC GPIO6 */
+			MX8MP_IOMUXC_NAND_WP_B__GPIO3_IO18		0x1d0 /* SMARC GPIO7 */
+		>;
+	};
+
+	pinctrl_gpio5_smarc: gpio5smarcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04		0x1d0 /* SMARC GPIO5 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtso
new file mode 100644
index 000000000000..1dcf249ca90d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_lvds0 {
+	brightness-levels = <0 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	enable-gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
+	num-interpolated-steps = <2>;
+	pwms = <&pwm1 0 66667 0>;
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/*
+	 * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
+	 * 72.4 * 7 = 506.8 MHz so the LDB serializer and LCDIFv3 scanout
+	 * engine can reach accurate pixel clock of exactly 72.4 MHz.
+	 */
+	assigned-clock-rates = <0>, <506800000>;
+	status = "okay";
+};
+
+&panel0_lvds {
+	compatible = "edt,etml1010g3dra";
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts b/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts
new file mode 100644
index 000000000000..6f3a7b863dca
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-phycore-fpsc.dtsi"
+
+/ {
+	compatible = "phytec,imx8mp-libra-rdk-fpsc",
+		     "phytec,imx8mp-phycore-fpsc", "fsl,imx8mp";
+	model = "PHYTEC i.MX8MP Libra RDK FPSC";
+
+	backlight_lvds0: backlight0 {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_lvds0>;
+		pinctrl-names = "default";
+		power-supply = <&reg_vdd_12v0>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	panel0_lvds: panel-lvds {
+		/* compatible panel in overlay */
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_vdd_3v3>;
+		status = "disabled";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "can1-stby";
+		gpio = <&gpio_expander 10 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "can2-stby";
+		gpio = <&gpio_expander 9 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_vdd_12v0: regulator-vdd-12v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "VDD_12V0";
+	};
+
+	reg_vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3";
+	};
+
+	reg_vdd_5v0: regulator-vdd-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VDD_5V0";
+	};
+};
+
+&eqos {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		};
+	};
+};
+
+/* CAN FD */
+&flexcan1 {
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&flexspi {
+	status = "okay";
+
+	spi_nor: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "I2C5_SDA",
+			  "GPIO1", "", "", "", "SPI1_CS",
+			  "", "", "", "SPI2_CS", "I2C1_SCL",
+			  "I2C1_SDA", "I2C2_SCL", "I2C2_SDA", "I2C3_SCL", "I2C3_SDA",
+			  "", "GPIO2", "", "LVDS1_BL_EN", "SPI3_CS",
+			  "", "GPIO3";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	leds@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-1 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-2 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-3 {
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	gpio_expander: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3",
+				  "CSI1_CTRL4", "CSI2_CTRL1", "CSI2_CTRL2",
+				  "CSI2_CTRL3", "CSI2_CTRL4", "CLK_EN_AV",
+				  "nCAN2_EN", "nCAN1_EN", "PCIE1_nWAKE",
+				  "PCIE2_nWAKE", "PCIE2_nALERT_3V3",
+				  "UART1_BT_RS_SEL", "UART1_RS232_485_SEL";
+		vcc-supply = <&reg_vdd_1v8>;
+
+		uart1_bt_rs_sel: bt-rs-hog {
+			gpios = <14 GPIO_ACTIVE_HIGH>;
+			gpio-hog;
+			line-name = "UART1_BT_RS_SEL";
+			output-low;	/* default RS232/RS485 */
+		};
+
+		uart1_rs232_485_sel: rs232-485-hog {
+			gpios = <15 GPIO_ACTIVE_HIGH>;
+			gpio-hog;
+			line-name = "UART1_RS232_485_SEL";
+			output-high;	/* default RS232 */
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_lvds0: lvds0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23	0x12
+		>;
+	};
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25	0x1C0
+		>;
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel0_in>;
+			};
+		};
+	};
+};
+
+/* Mini PCIe */
+&pcie {
+	reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
+
+&reg_vdd_io {
+	regulator-max-microvolt = <1800000>;
+	regulator-min-microvolt = <1800000>;
+};
+
+&rv3028 {
+	interrupt-parent = <&gpio5>;
+	interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	aux-voltage-chargeable = <1>;
+	pinctrl-0 = <&pinctrl_rtc>;
+	pinctrl-names = "default";
+	trickle-resistor-ohms = <3000>;
+	wakeup-source;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* debug console */
+&uart4 {
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
index e4215c83ee0f..83194ea7cb81 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -46,6 +46,24 @@
 	};
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
 &i2c1 {
 	sgtl5000: audio-codec@a {
 		compatible = "fsl,sgtl5000";
@@ -57,8 +75,8 @@
 		clocks = <&clk IMX8MP_CLK_CLKOUT1>;
 		#sound-dai-cells = <0>;
 
-		VDDA-supply  = <&reg_vcc_3v3_audio>;
-		VDDD-supply  = <&reg_vcc_1v8_audio>;
+		VDDA-supply = <&reg_vcc_3v3_audio>;
+		VDDD-supply = <&reg_vcc_1v8_audio>;
 		VDDIO-supply = <&reg_vcc_1v8_audio>;
 	};
 };
@@ -92,6 +110,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_smarc_gpio>;
 
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x10
+		>;
+	};
+
 	pinctrl_sai2: sai2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC   0xd6
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
index 61c2a63efc6d..0fd5c3abcdb7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
@@ -200,8 +200,11 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -241,8 +244,11 @@
 };
 
 &i2c6 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	scl-gpios = <&gpio3 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -602,38 +608,50 @@
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3>,
-			<MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3>;
+			<MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001e0>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x1e0>,
+			<MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x1e0>;
 	};
 
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3>,
-			<MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3>;
+			<MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001e0>;
 	};
 
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3>,
-			<MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3>;
+			<MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001e0>;
 	};
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c3>,
-			<MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c3>;
+			<MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001e0>;
 	};
 
 	pinctrl_i2c5: i2c5grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001c3>,
-			<MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001c3>;
+			<MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001e0>;
 	};
 
 	pinctrl_i2c6: i2c6grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL		0x400001c3>,
-			<MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001c3>;
+			<MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001e0>;
+	};
+
+	pinctrl_i2c6_gpio: i2c6gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x1e0>,
+			<MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x1e0>;
 	};
 
 	pinctrl_lcd0_backlight: lcd0-backlightgrp {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-navqp.dts b/arch/arm64/boot/dts/freescale/imx8mp-navqp.dts
new file mode 100644
index 000000000000..4a4f7c1adc23
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-navqp.dts
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Emcraft Systems
+ * Copyright 2024 Gilles Talis <gilles.talis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Emcraft Systems i.MX8MPlus NavQ+ Kit";
+	compatible = "emcraft,imx8mp-navqp", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J15";
+		type = "d";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <10000>;
+			qca,disable-smarteee;
+			qca,disable-hibernation-mode;
+		};
+	};
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* SD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22				0x110
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16				0x19
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL			0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA			0x1c2
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD				0x10
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC				0x10
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03				0x41
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19				0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX				0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX				0x49
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT				0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT				0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT				0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12				0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B				0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-enc-carrier-board.dts b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-enc-carrier-board.dts
new file mode 100644
index 000000000000..1df9488aaeb2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-enc-carrier-board.dts
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Boundary Devices
+ * Copyright 2025 Collabora Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx8mp-nitrogen-som.dtsi"
+
+/ {
+	model = "Boundary Devices Nitrogen8M Plus ENC Carrier Board";
+	compatible = "boundary,imx8mp-nitrogen-enc-carrier-board",
+			"boundary,imx8mp-nitrogen-som", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		data-role = "dual";
+		label = "USB-C";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	reg_usb_vbus: regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_vbus>;
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	usb-hub-reset-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_LOW>;
+		line-name = "usb-hub-reset";
+		output-low;
+	};
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&pinctrl_hdmi>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c2 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pinctrl_i2c2_pca9546>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+
+			rtc@52 {
+				compatible = "microcrystal,rv3028";
+				reg = <0x52>;
+				interrupts-extended = <&gpio1 4 IRQ_TYPE_LEVEL_LOW>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_rv3028>;
+				wakeup-source;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	usb-mux@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		interrupts-extended = <&gpio1 8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_hd3ss3220>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&isp_0 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	assigned-clocks = <&clk IMX8MP_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_0 {
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb3_0>;
+	usb-role-switch;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x143
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x40000019
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000019
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x100
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07		0x119
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x16
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x1c4
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x41
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x41
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x41
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x41
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x41
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04		0x41
+			MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03		0x41
+		>;
+	};
+
+	pinctrl_i2c2_pca9546: i2c2-pca9546grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x100
+		>;
+	};
+
+	pinctrl_i2c4_hd3ss3220: i2c4-hd3ss3220grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x16
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x03
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT		0x100
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT		0xd6
+			MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0xd6
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+		MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT			0x116
+		>;
+	};
+
+	pinctrl_reg_usb_vbus: reg-usb-vbusgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x100
+		>;
+	};
+
+	pinctrl_rv3028: rv3028grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04		0x1c0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usb3_0: usb3-0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x1c0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__USDHC1_VSELECT		0x116
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-som.dtsi
new file mode 100644
index 000000000000..5da0f1b3ed8a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-som.dtsi
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Boundary Devices
+ * Copyright 2024 Silicon Signals Pvt. Ltd.
+ *
+ * Author : Bhavin Sharma <bhavin.sharma@siliconsignals.io>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Boundary Device Nitrogen8MP SMARC SoM";
+	compatible = "boundary,imx8mp-nitrogen-smarc-som", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+	        compatible = "regulator-fixed";
+	        regulator-name = "VSD_3V3";
+	        regulator-min-microvolt = <3300000>;
+	        regulator-max-microvolt = <3300000>;
+	        gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+	        enable-active-high;
+	};
+};
+
+&A53_0 {
+        cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+        cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+        cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+        cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	status = "okay";
+
+	mcp23018: gpio@20 {
+		compatible = "microchip,mcp23018";
+		gpio-controller;
+		#gpio-cells = <0x2>;
+		reg = <0x20>;
+		interrupts-extended = <&gpio4 22 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <0x2>;
+		microchip,irq-mirror;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mcp23018>;
+		reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* Console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* SD-card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+		        MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10                     	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <
+		        MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL            			0x400001c3
+		        MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA                 		0x400001c3
+		>;
+	};
+
+	pinctrl_mcp23018: mcp23018grp {
+		fsl,pins = <
+		        MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22            			0x1c0
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27             			0x100
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14				0x1c0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                            0x40
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                            0x40
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK        			0x10
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD        			0x150
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0    			0x150
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1    			0x150
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2    			0x150
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3    			0x150
+			MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4    			0x150
+			MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5    			0x150
+			MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6    			0x150
+			MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7    			0x150
+			MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE  			0x10
+			MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B 			0x140
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK        			0x14
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD        			0x154
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0    			0x154
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1    			0x154
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2    			0x154
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3    			0x154
+			MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4    			0x154
+			MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5    			0x154
+			MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6    			0x154
+			MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7    			0x154
+			MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE  			0x14
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK        			0x12
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD        			0x152
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0    			0x152
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1    			0x152
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2    			0x152
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3    			0x152
+			MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4    			0x152
+			MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5    			0x152
+			MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6    			0x152
+			MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7    			0x152
+			MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE  			0x12
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                                0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                                0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                            0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                            0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                            0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                            0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                                0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                                0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                            0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                            0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                            0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                            0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                                0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                                0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                            0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                            0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                            0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                            0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B				0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-universal-board.dts b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-universal-board.dts
new file mode 100644
index 000000000000..46b243218dc8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-universal-board.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Boundary Devices
+ * Copyright 2024 Silicon Signals Pvt. Ltd.
+ *
+ * Author : Bhavin Sharma <bhavin.sharma@siliconsignals.io>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-nitrogen-smarc-som.dtsi"
+
+/ {
+	model = "Boundary Device Nitrogen8MP Universal SMARC Carrier Board";
+	compatible = "boundary,imx8mp-nitrogen-smarc-universal-board",
+			"boundary,imx8mp-nitrogen-smarc-som", "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-som.dtsi
new file mode 100644
index 000000000000..f658309612ef
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-som.dtsi
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Boundary Devices
+ * Copyright 2025 Collabora Ltd.
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Boundary Devices Nitrogen8M Plus Som";
+	compatible = "boundary,imx8mp-nitrogen-som", "fsl,imx8mp";
+
+	rfkill-bt {
+		compatible = "rfkill-gpio";
+		label = "rfkill-bluetooth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rfkill_bt>;
+		radio-type = "bluetooth";
+		shutdown-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	};
+
+	rfkill-wlan {
+		compatible = "rfkill-gpio";
+		label = "rfkill-wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rfkill_wlan>;
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 15 GPIO_OPEN_DRAIN>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_pmic>;
+
+		regulators {
+
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC (BUCK1)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <600000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "VDD_ARM (BUCK2)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <600000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3P3V (BUCK4)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1P8V (BUCK5)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "NVCC_DRAM_1P1V (BUCK6)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8 (LDO1)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1600000>;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "VDDA_1V8 (LDO3)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <800000>;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD1 (LDO5)";
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 17 GPIO_OPEN_DRAIN>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 19 GPIO_OPEN_DRAIN>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 21 GPIO_OPEN_DRAIN>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	status = "okay";
+};
+
+&usdhc3 {
+	bus-width = <8>;
+	non-removable;
+	no-mmc-hs400;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x20
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0xa0
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+
+			MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02				0x10
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16				0x100
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1c3
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1c3
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x1c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x1c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x1c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x1c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x41
+		>;
+	};
+
+	pinctrl_rfkill_bt: rfkill-btgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x119
+		>;
+	};
+
+	pinctrl_rfkill_wlan: rfkill-wlangrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x16
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x10
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x150
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x150
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x150
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x150
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x150
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x150
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x150
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x150
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x150
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x140
+
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x14
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x154
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x154
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x154
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x154
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x154
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x154
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x154
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x154
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x154
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x12
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x152
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x152
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x152
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x152
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x152
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x152
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x152
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x152
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x152
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi
new file mode 100644
index 000000000000..f269f7a004fc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Pengutronix, Ahmad Fatoum <kernel@pengutronix.de>
+ */
+
+&clk {
+	assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>,
+			  <&clk IMX8MP_CLK_A53_CORE>,
+			  <&clk IMX8MP_SYS_PLL3>,
+			  <&clk IMX8MP_CLK_NOC>,
+			  <&clk IMX8MP_CLK_NOC_IO>,
+			  <&clk IMX8MP_CLK_GIC>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_ARM_PLL_OUT>,
+				 <0>,
+				 <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL3_OUT>,
+				 <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <0>, <0>,
+			       <600000000>,
+			       <800000000>,
+			       <600000000>,
+			       <400000000>;
+	fsl,operating-mode = "nominal";
+};
+
+&gpu2d {
+	assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <800000000>;
+};
+
+&gpu3d {
+	assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>,
+			  <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <800000000>, <800000000>;
+};
+
+&pgc_hdmimix {
+	assigned-clocks = <&clk IMX8MP_CLK_HDMI_AXI>,
+			  <&clk IMX8MP_CLK_HDMI_APB>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_133M>;
+	assigned-clock-rates = <400000000>, <133000000>;
+};
+
+&pgc_hsiomix {
+	assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <400000000>;
+};
+
+&pgc_gpumix {
+	assigned-clocks = <&clk IMX8MP_CLK_GPU_AXI>,
+			  <&clk IMX8MP_CLK_GPU_AHB>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL3_OUT>,
+				 <&clk IMX8MP_SYS_PLL3_OUT>;
+	assigned-clock-rates = <600000000>, <300000000>;
+};
+
+&pgc_mlmix {
+	assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
+			  <&clk IMX8MP_CLK_ML_AXI>,
+			  <&clk IMX8MP_CLK_ML_AHB>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <800000000>,
+			       <800000000>,
+			       <300000000>;
+};
+
+&media_blk_ctrl {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>,
+			  <&clk IMX8MP_CLK_MEDIA_APB>,
+			  <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
+			  <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
+			  <&clk IMX8MP_CLK_MEDIA_ISP>,
+			  <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_VIDEO_PLL1_OUT>,
+				 <&clk IMX8MP_VIDEO_PLL1_OUT>,
+				 <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <400000000>, <200000000>,
+			       <0>, <0>, <400000000>,
+			       <1039500000>;
+};
+
+&vpu_g1 {
+	assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
+	assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+	assigned-clock-rates = <600000000>;
+};
+
+&vpu_g2 {
+	assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+	assigned-clock-rates = <500000000>;
+};
+
+&vpumix_blk_ctrl {
+	assigned-clocks = <&clk IMX8MP_VPU_PLL>, <&clk IMX8MP_CLK_VPU_BUS>;
+	assigned-clock-parents = <0>, <&clk IMX8MP_VPU_PLL_OUT>;
+	assigned-clock-rates = <600000000>, <600000000>;
+};
+
+/delete-node/ &{noc_opp_table/opp-1000000000};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index c8640cac3edc..436152308642 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -6,8 +6,10 @@
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/leds/leds-pca9532.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "imx8mp-phycore-som.dtsi"
 
 / {
@@ -19,6 +21,49 @@
 		stdout-path = &uart1;
 	};
 
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds1>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <11>;
+		enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+		num-interpolated-steps = <2>;
+		power-supply = <&reg_lvds1_reg_en>;
+		pwms = <&pwm3 0 50000 0>;
+	};
+
+	fan0: fan {
+		compatible = "gpio-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan>;
+		gpio-fan,speed-map = <0     0
+				      13000 1>;
+		gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+		#cooling-cells = <2>;
+	};
+
+	panel1_lvds: panel-lvds {
+		compatible = "edt,etml1010g3dra";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_vcc_3v3_sw>;
+
+		port {
+			panel1_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+
+	reg_vcc_5v_sw: regulator-vcc-5v-sw {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VCC_5V_SW";
+	};
+
 	reg_can1_stby: regulator-can1-stby {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -39,6 +84,15 @@
 		regulator-name = "can2-stby";
 	};
 
+	reg_lvds1_reg_en: regulator-lvds1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1200000>;
+		regulator-min-microvolt = <1200000>;
+		regulator-name = "lvds1_reg_en";
+	};
+
 	reg_usb1_vbus: regulator-usb1-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -61,6 +115,48 @@
 		startup-delay-us = <100>;
 		off-on-delay-us = <12000>;
 	};
+
+	reg_vcc_3v3_sw: regulator-vcc-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	thermal-zones {
+		soc-thermal {
+			trips {
+				active1: trip2 {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&active1>;
+					cooling-device = <&fan0 1 THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+/* TPM */
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	tpm: tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <38000000>;
+	};
 };
 
 &eqos {
@@ -115,6 +211,7 @@
 		compatible = "atmel,24c02";
 		reg = <0x51>;
 		pagesize = <16>;
+		vcc-supply = <&reg_vcc_3v3_sw>;
 	};
 
 	leds@62 {
@@ -135,10 +232,71 @@
 	};
 };
 
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+
+	ports {
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel1_in>;
+			};
+		};
+	};
+};
+
+&media_blk_ctrl {
+	/*
+	 * The LVDS panel on this device uses 72.4 MHz pixel clock,
+	 * set IMX8MP_VIDEO_PLL1 to 72.4 * 7 = 506.8 MHz so the LDB
+	 * serializer and LCDIFv3 scanout engine can reach accurate
+	 * pixel clock of exactly 72.4 MHz.
+	 */
+	assigned-clock-rates = <500000000>, <200000000>,
+			       <0>, <0>, <500000000>,
+			       <506800000>;
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
 
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,clkreq-unsupported;
+	status = "okay";
+};
+
+/* Mini PCIe */
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_vcc_3v3_sw>;
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&rv3028 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rtc>;
+	interrupt-parent = <&gpio4>;
+	interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+	aux-voltage-chargeable = <1>;
+	wakeup-source;
+	trickle-resistor-ohms = <3000>;
+};
+
 /* debug console */
 &uart1 {
 	pinctrl-names = "default";
@@ -163,6 +321,7 @@
 
 /* USB2 4-port USB3.0 HUB */
 &usb3_phy1 {
+	vbus-supply = <&reg_vcc_5v_sw>;
 	status = "okay";
 };
 
@@ -196,22 +355,25 @@
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>;
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };
 
 &gpio1 {
 	gpio-line-names = "", "", "X_PMIC_WDOG_B", "",
-		"PMIC_SD_VSEL", "", "", "", "", "",
-		"", "", "USB1_OTG_PWR", "", "", "X_nETHPHY_INT";
+		"PMIC_SD_VSEL", "", "", "", "PCIe_nPERST", "LVDS1REG_EN",
+		"PCIe_nWAKE", "PCIe_nCLKREQ", "USB1_OTG_PWR", "",
+		"PCIe_nW_DISABLE";
 };
 
 &gpio2 {
 	gpio-line-names = "", "", "", "",
 		"", "", "", "", "", "",
 		"", "", "X_SD2_CD_B", "", "", "",
-		"", "", "", "SD2_RESET_B";
+		"", "", "", "SD2_RESET_B", "LVDS1_BL_EN";
 };
 
 &gpio3 {
@@ -225,10 +387,24 @@
 	gpio-line-names = "", "", "", "",
 		"", "", "", "", "", "",
 		"", "", "", "", "", "",
-		"", "", "X_PMIC_IRQ_B", "", "nENET0_INT_PWDN";
+		"", "", "X_PMIC_IRQ_B", "nRTC_INT", "nENET0_INT_PWDN";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "", "", "X_ECSPI1_SSO";
 };
 
 &iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO   0x80
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI   0x80
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK   0x80
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09     0x00
+		>;
+	};
+
 	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x2
@@ -239,16 +415,22 @@
 			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x90
 			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
 			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90
-			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x16
-			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x16
-			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
-			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
-			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
-			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x12
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x12
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x12
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x12
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x12
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x12
 			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20			0x10
 		>;
 	};
 
+	pinctrl_fan: fan0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04       0x16
+		>;
+	};
+
 	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x154
@@ -289,16 +471,43 @@
 		>;
 	};
 
+	pinctrl_lvds1: lvds1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20		0x12
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08     0x40
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10     0x60
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x60 /* open drain, pull up */
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14     0x40
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT		0x12
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x1C0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x40
-			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x40
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
 		>;
 	};
 
@@ -319,7 +528,7 @@
 
 	pinctrl_usdhc2_pins: usdhc2-gpiogrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x40
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi
new file mode 100644
index 000000000000..8b0e8cf86cad
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi
@@ -0,0 +1,796 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mp.dtsi"
+
+/ {
+	compatible = "phytec,imx8mp-phycore-fpsc", "fsl,imx8mp";
+	model = "PHYTEC phyCORE-i.MX8MP FPSC";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x80000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		 compatible = "regulator-fixed";
+		 off-on-delay-us = <12000>;
+		 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		 pinctrl-names = "default";
+		 regulator-max-microvolt = <3300000>;
+		 regulator-min-microvolt = <3300000>;
+		 regulator-name = "VDDSW_SD2";
+		 startup-delay-us = <100>;
+		 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		 enable-active-high;
+	 };
+
+	reg_vdd_io: regulator-vdd-io {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_IO";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 { /* FPSC SPI1 */
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+};
+
+&ecspi2 { /* FPSC SPI2 */
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	pinctrl-names = "default";
+};
+
+&ecspi3 { /* FPSC SPI3 */
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	pinctrl-names = "default";
+};
+
+&eqos { /* FPSC RGMII2 */
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-names = "default";
+};
+
+&fec { /* FPSC GB_ETH1 */
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-names = "default";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		};
+	};
+};
+
+&flexcan1 { /* FPSC CAN1 */
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+};
+
+&flexcan2 { /* FPSC CAN2 */
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+&flexspi { /* FPSC QSPI */
+	pinctrl-0 = <&pinctrl_flexspi>;
+	pinctrl-names = "default";
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "PCIE1_nPERST";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "SD2_RESET_B";
+};
+
+&gpio3 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "I2C6_SCL",
+			  "I2C6_SDA", "I2C5_SCL";
+};
+
+&gpio4 { /* FPSC GPIO */
+	gpio-line-names = "GPIO6", "RGMII2_nINT", "GPIO7", "GPIO4", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "X_PMIC_IRQ_B", "",
+			  "", "GPIO5", "", "", "RGMII2_EVENT_OUT",
+			  "", "", "RGMII2_EVENT_IN";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	pinctrl-names = "default";
+};
+
+&gpio5 { /* FPSC GPIO */
+	gpio-line-names = "", "", "", "", "I2C5_SDA",
+			  "GPIO1", "", "", "", "SPI1_CS",
+			  "", "", "", "SPI2_CS", "I2C1_SCL",
+			  "I2C1_SDA", "I2C2_SCL", "I2C2_SDA", "I2C3_SCL", "I2C3_SDA",
+			  "", "GPIO2", "", "", "SPI3_CS",
+			  "", "GPIO3";
+	pinctrl-0 = <&pinctrl_gpio5>;
+	pinctrl-names = "default";
+};
+
+&i2c1 { /* FPSC I2C1 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "VDD_SOC (BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "VDD_ARM (BUCK2)";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "VDD_3V3 (BUCK4)";
+			};
+
+			buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDD_1V8 (BUCK5)";
+			};
+
+			buck6: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "NVCC_DRAM_1V1 (BUCK6)";
+			};
+
+			ldo1: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SNVS_1V8 (LDO1)";
+			};
+
+			ldo3: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDDA_1V8 (LDO3)";
+			};
+
+			ldo5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SD2 (LDO5)";
+			};
+		};
+	};
+
+	/* User EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vdd_io>;
+	};
+
+	/* factory EEPROM */
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+		read-only;
+		vcc-supply = <&reg_vdd_io>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+};
+
+&i2c2 { /* FPSC I2C2 */
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c3 { /* FPSC I2C3 */
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c5 { /* FPSC I2C4 */
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c6 { /* FPSC I2C5 */
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio3 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&iomuxc {
+	pinctrl_flexcan1: can1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__CAN1_TX		0x154	/* CAN1_TX */
+			MX8MP_IOMUXC_SAI2_TXC__CAN1_RX		0x154	/* CAN1_RX */
+		>;
+	};
+
+	pinctrl_flexcan2: can2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX		0x154	/* CAN2_TX */
+			MX8MP_IOMUXC_UART3_TXD__CAN2_RX		0x154	/* CAN2_RX */
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01				0x10	/* RGMII2_nINT */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27				0x10	/* RGMII2_EVENT_IN */
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24				0x10	/* RGMII2_EVENT_OUT */
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2	/* RGMII2_MDIO */
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2	/* RGMII2_MDC */
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x12	/* RGMII2_TX_D3 */
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x12	/* RGMII2_TX_D2 */
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x12	/* RGMII2_TX_D1 */
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x12	/* RGMII2_TX_D0 */
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x12	/* RGMII2_TX_CTL */
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x12	/* RGMII2_TXC */
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90	/* RGMII2_RX_D3 */
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90	/* RGMII2_RX_D2 */
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90	/* RGMII2_RX_D1 */
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90	/* RGMII2_RX_D0 */
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x90	/* RGMII2_RX_CTL */
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90	/* RGMII2_RXC */
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x140
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x12
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x12
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x14
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x14
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x14
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x14
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82	/* QSPI_CE */
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2	/* QSPI_CLK */
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82	/* QSPI_DATA_0 */
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82	/* QSPI_DATA_1 */
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82	/* QSPI_DATA_2 */
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82	/* QSPI_DATA_3 */
+			MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS		0x82	/* QSPI_DQS */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x40	/* GPIO4 */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x106	/* GPIO5 */
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x106	/* GPIO6 */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x106	/* GPIO7 */
+		>;
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x106	/* GPIO1 */
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x106	/* GPIO2 */
+			MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26	0x106	/* GPIO3 */
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x106	/* HDMI_CEC */
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x106	/* HDMI_SCL */
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x106	/* HDMI_SDA */
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x106	/* HDMI_HPD */
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1e2
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1e2
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2	/* I2C1_SDA_DNU */
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2	/* I2C1_SCL_DNU */
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1e2
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1e2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2	/* I2C2_SDA */
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2	/* I2C2_SCL */
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x1e2
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x1e2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2	/* I2C3_SDA */
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2	/* I2C3_SCL */
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04	0x1e2
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x1e2
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001c2	/* I2C4_SDA */
+			MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL	0x400001c2	/* I2C4_SCL */
+		>;
+	};
+
+	pinctrl_i2c6_gpio: i2c6gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20	0x1e2
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19	0x1e2
+		>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001c2	/* I2C5_SDA */
+			MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL	0x400001c2	/* I2C5_SCL */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x10	/* PCIE1_nCLKREQ */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08     0x40	/* PCIE1_nPERST */
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x140
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT	0x106	/* PWM1 */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT	0x106	/* PWM2 */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT		0x106	/* PWM3 */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT	0x106	/* PWM4 */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19    0x40
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK	0x106	/* SAI1_MCLK */
+			MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI5_RX_SYNC	0x106	/* SAI1_RX_SYNC */
+			MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI5_RX_BCLK	0x106	/* SAI1_RX_BCLK */
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI5_RX_DATA00	0x106	/* SAI1_RX_DATA */
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC	0x106	/* SAI1_TX_SYNC */
+			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK	0x106	/* SAI1_TX_BCLK */
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00	0x106	/* SAI1_TX_DATA */
+		>;
+	};
+
+	pinctrl_ecspi1: spi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x82	/* SPI1_SCLK */
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x82	/* SPI1_MOSI */
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x82	/* SPI1_MISO */
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x106	/* SPI1_CS */
+		>;
+	};
+
+	pinctrl_ecspi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x82	/* SPI2_SCLK */
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x82	/* SPI2_MOSI */
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x82	/* SPI2_MISO */
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x106     /* SPI2_CS */
+		>;
+	};
+
+	pinctrl_ecspi3: spi3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK	0x82	/* SPI3_SCLK */
+			MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI	0x82	/* SPI3_MOSI */
+			MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO	0x82	/* SPI3_MISO */
+			MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24	0x106     /* SPI3_CS */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX	0x140	/* UART2_RXD */
+			MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX	0x140	/* UART2_TXD */
+			MX8MP_IOMUXC_SD1_DATA5__UART2_DTE_RTS	0x140	/* UART2_RTS */
+			MX8MP_IOMUXC_SD1_DATA4__UART2_DTE_CTS	0x140	/* UART2_CTS */
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA6__UART3_DTE_RX	0x140	/* UART1_RXD */
+			MX8MP_IOMUXC_SD1_DATA7__UART3_DTE_TX	0x140	/* UART1_TXD */
+			MX8MP_IOMUXC_SD1_STROBE__UART3_DTE_RTS	0x140	/* UART1_RTS */
+			MX8MP_IOMUXC_SD1_RESET_B__UART3_DTE_CTS	0x140	/* UART1_CTS */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140	/* UART3_RXD */
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140	/* UART3_TXD */
+		>;
+	};
+
+	pinctrl_usb0: usb0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR	0x106	/* USB1_PWR_EN */
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x106	/* USB1_OC */
+			MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID	0x106	/* USB1_ID */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x106	/* USB2_PWR_EN */
+			MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC	0x106	/* USB2_OC */
+			MX8MP_IOMUXC_GPIO1_IO11__USB2_OTG_ID	0x106	/* USB2_ID */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__USDHC1_WP	0x106	/* SDIO_WP */
+			MX8MP_IOMUXC_GPIO1_IO06__USDHC1_CD_B	0x106	/* SDIO_CD */
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x106	/* SDIO_CLK */
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x106	/* SDIO_CLK */
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x106	/* SDIO_DATA0 */
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x106	/* SDIO_DATA1 */
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x106	/* SDIO_DATA2 */
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x106	/* SDIO_DATA3 */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B	0x40	/* SDCARD_CD */
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP		0x40	/* SDCARD_WP */
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190	/* SDCARD_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0	/* SDCARD_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0	/* SDCARD_DATA0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0	/* SDCARD_DATA1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0	/* SDCARD_DATA2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0	/* SDCARD_DATA3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B	0x40	/* SDCARD_CD */
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP		0x40	/* SDCARD_WP */
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194	/* SDCARD_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4	/* SDCARD_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4	/* SDCARD_DATA0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4	/* SDCARD_DATA1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4	/* SDCARD_DATA2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4	/* SDCARD_DATA3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B	0x40	/* SDCARD_CD */
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP		0x40	/* SDCARD_WP */
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196	/* SDCARD_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6	/* SDCARD_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6	/* SDCARD_DATA0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6	/* SDCARD_DATA1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6	/* SDCARD_DATA2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6	/* SDCARD_DATA3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d2
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d2
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d2
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d2
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d2
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d2
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d2
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d2
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xe6
+		>;
+	};
+};
+
+&pcie { /* FPSC PCIE1 */
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+};
+
+&pwm1 { /* FPSC PWM1 */
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+};
+
+&pwm2 { /* FPSC PWM2 */
+	pinctrl-0 = <&pinctrl_pwm2>;
+	pinctrl-names = "default";
+};
+
+&pwm3 { /* FPSC PWM3 */
+	pinctrl-0 = <&pinctrl_pwm3>;
+	pinctrl-names = "default";
+};
+
+&pwm4 { /* FPSC PWM4 */
+	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-names = "default";
+};
+
+&sai5 { /* FPSC SAI1 */
+	pinctrl-0 = <&pinctrl_sai5>;
+	pinctrl-names = "default";
+};
+
+&uart2 { /* FPSC UART2 */
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	fsl,dte-mode;
+};
+
+&uart3 { /* FPSC UART1 */
+	pinctrl-0 = <&pinctrl_uart3>;
+	pinctrl-names = "default";
+	fsl,dte-mode;
+};
+
+&uart4 { /* FPSC UART3 */
+	pinctrl-0 = <&pinctrl_uart4>;
+	pinctrl-names = "default";
+};
+
+&usb3_0 { /* FPSC USB1 */
+	pinctrl-0 = <&pinctrl_usb0>;
+	pinctrl-names = "default";
+};
+
+&usb3_1 { /* FPSC USB2 */
+	pinctrl-0 = <&pinctrl_usb1>;
+	pinctrl-names = "default";
+};
+
+&usdhc1 { /* FPSC SDIO */
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default";
+};
+
+&usdhc2 { /* FPSC SDCARD */
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	sd-uhs-sdr104;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-0 = <&pinctrl_wdog>;
+	pinctrl-names = "default";
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-no-eth.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phycore-no-eth.dtso
new file mode 100644
index 000000000000..5f0278bf61ee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-no-eth.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
+ * Author: Cem Tenruh <c.tenruh@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&fec {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
index c976c3b6cbc6..04f724c6ec21 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -20,6 +20,15 @@
 		device_type = "memory";
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
+
+	reg_vdd_io: regulator-vdd-io {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_IO";
+	};
 };
 
 &A53_0 {
@@ -170,12 +179,12 @@
 		compatible = "atmel,24c32";
 		reg = <0x51>;
 		pagesize = <32>;
+		vcc-supply = <&reg_vdd_io>;
 	};
 
 	rv3028: rtc@52 {
 		compatible = "microcrystal,rv3028";
 		reg = <0x52>;
-		trickle-resistor-ohms = <3000>;
 	};
 };
 
@@ -200,9 +209,7 @@
 };
 
 &gpio1 {
-	gpio-line-names = "", "", "X_PMIC_WDOG_B", "",
-		"", "", "", "", "", "",
-		"", "", "", "", "", "X_nETHPHY_INT";
+	gpio-line-names = "", "", "X_PMIC_WDOG_B";
 };
 
 &gpio4 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
index 0fef066471ba..16f5899de415 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
@@ -6,6 +6,39 @@
 #ifndef __DTS_IMX8MP_PINFUNC_H
 #define __DTS_IMX8MP_PINFUNC_H
 
+/* Drive Strength */
+#define MX8MP_DSE_X1		0x0
+#define MX8MP_DSE_X2		0x4
+#define MX8MP_DSE_X4		0x2
+#define MX8MP_DSE_X6		0x6
+
+/* Slew Rate */
+#define MX8MP_FSEL_FAST		0x10
+#define MX8MP_FSEL_SLOW		0x0
+
+/* Open Drain */
+#define MX8MP_ODE_ENABLE	0x20
+#define MX8MP_ODE_DISABLE	0x0
+
+#define MX8MP_PULL_DOWN		0x0
+#define MX8MP_PULL_UP		0x40
+
+/* Hysteresis */
+#define MX8MP_HYS_CMOS		0x0
+#define MX8MP_HYS_SCHMITT	0x80
+
+#define MX8MP_PULL_ENABLE	0x100
+#define MX8MP_PULL_DISABLE	0x0
+
+/* SION force input mode */
+#define MX8MP_SION		0x40000000
+
+/* long defaults */
+#define MX8MP_USDHC_DATA_DEFAULT (MX8MP_FSEL_FAST | MX8MP_PULL_UP | \
+				  MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+#define MX8MP_I2C_DEFAULT (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | \
+			   MX8MP_PULL_ENABLE | MX8MP_SION)
+
 /*
  * The pin function ID is a tuple of
  * <mux_reg conf_reg input_reg mux_mode input_val>
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-basic.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-basic.dts
new file mode 100644
index 000000000000..5a2629f3567c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-basic.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU basic/fallback";
+	compatible = "skov,imx8mp-skov-basic", "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
new file mode 100644
index 000000000000..020f20c8ce66
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
@@ -0,0 +1,798 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "imx8mp.dtsi"
+#include "imx8mp-nominal.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		/* some of this aliases like backlight0, ethernetX and switch0
+		 * are needed for the bootloader.
+		 */
+		backlight0 = &backlight;
+		ethernet0 = &eqos;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+		switch0 = &switch;
+	};
+
+	/*
+	 * Backlight is present only on some of boards, so it is disabled by
+	 * default.
+	 */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 20000 0>;
+		power-supply = <&reg_24v>;
+		enable-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			label = "D1";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "D2";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "D3";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_1v2: regulator-1v2 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_p>;
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_s>;
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_s>;
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/*
+	 * This regulator will provide power as long as possible even if
+	 * undervoltage is detected.
+	 */
+	reg_5v_p: regulator-5v-p {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_P";
+		vin-supply = <&reg_24v>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/*
+	 * This regulator will be automatically shutdown if undervoltage is
+	 * detected.
+	 */
+	reg_5v_s: regulator-5v-s {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_S";
+		vin-supply = <&reg_24v>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_24v: regulator-24v {
+		compatible = "regulator-fixed";
+		regulator-name = "24V";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg24v>;
+		interrupts-extended = <&gpio4 23 IRQ_TYPE_EDGE_FALLING>;
+		system-critical-regulator;
+		regulator-uv-less-critical-window-ms = <50>;
+	};
+
+	reg_can2rs: regulator-can2rs {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN2RS";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can2rs>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_canrs: regulator-canrs {
+		compatible = "regulator-fixed";
+		regulator-name = "CANRS";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_canrs>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_tft_vcom: regulator-tft-vcom {
+		compatible = "pwm-regulator";
+		pwms = <&pwm4 0 20000 0>;
+		regulator-name = "VCOM";
+		vin-supply = <&reg_5v_s>;
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-always-on;
+		voltage-table = <3600000 26>;
+		status = "disabled";
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
+		vin-supply = <&reg_vdd_3v3>;
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/*
+ * Board is passively cooled and heatsink is specced for continuous operation
+ * at 1.2 GHz only. Short bouts of 1.6 GHz are ok, but these should be done
+ * intentionally, not as part of suspend/resume cycles.
+ */
+&{/opp-table/opp-1600000000} {
+	/delete-property/ opp-suspend;
+};
+
+&{/opp-table/opp-1800000000} {
+	/delete-property/ opp-suspend;
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc: adc@0 {
+		compatible = "microchip,mcp3002";
+		reg = <0>;
+		vref-supply = <&reg_vdd_3v3>;
+		spi-max-frequency = <1000000>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_canrs>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2rs>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-name = "VDD_SOC";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram_1v1: BUCK6 {
+				regulator-name = "NVCC_DRAM_1V1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs_1v8: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda_1v8: LDO3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd2: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	i2c_rtc: rtc@51 {
+		compatible = "nxp,pcf85063tp";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>;
+		quartz-load-femtofarads = <12500>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <380000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	switch: switch@5f {
+		compatible = "microchip,ksz9893";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_switch>;
+		reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+		reg = <0x5f>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan1: port@0 {
+				reg = <0>;
+				phy-mode = "internal";
+				label = "lan1";
+			};
+
+			lan2: port@1 {
+				reg = <1>;
+				phy-mode = "internal";
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "cpu";
+				ethernet = <&eqos>;
+				phy-mode = "rgmii";
+				/* 2ns RX delay is implemented on PCB */
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <0>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+	/*
+	 * While there is no CTS line, the property "uart-has-rtscts" is still
+	 * the right thing to do to enable the UART to do RS485. In RS485-Mode
+	 * CTS isn't used anyhow and there is no dedicated property
+	 * "uart-has-rts-but-no-cts".
+	 */
+	uart-has-rtscts;
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+/* SD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	vqmmc-supply = <&reg_nvcc_sd2>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24			0x0100
+		>;
+	};
+
+	pinctrl_can2rs: can2rsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22			0x154
+		>;
+	};
+
+	pinctrl_canrs: canrsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21			0x154
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK			0x44
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI			0x44
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO			0x44
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13			0x40
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX				0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX				0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX				0x154
+			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX				0x154
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05			0x19
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06			0x19
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07			0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14			0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16			0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18			0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL				0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA				0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03			0x41
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT			0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT			0x116
+		>;
+	};
+
+	pinctrl_reg24v: reg24vgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23			0x154
+		>;
+	};
+
+	pinctrl_reg_vsd_3v3: regvsd3v3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31			0x41
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00			0x41
+			MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01			0x41
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			/* CTP_INT */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28			0x41
+			/* CTP_RST */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29			0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX			0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX			0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS			0x140
+			/* CTS pin is not connected, but needed as workaround */
+			MX8MP_IOMUXC_UART3_TXD__UART1_DTE_CTS			0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX			0x14f
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX			0x14f
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT			0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT			0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT			0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12			0x1c4
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20				0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B			0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
new file mode 100644
index 000000000000..32a429437cbd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - HDMI";
+	compatible = "skov,imx8mp-skov-revb-hdmi", "fsl,imx8mp";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD			0x19
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL			0x400001c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26			0x400001c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27			0x400001c2
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
new file mode 100644
index 000000000000..e602c1c96143
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - LT6";
+	compatible = "skov,imx8mp-skov-revb-lt6", "fsl,imx8mp";
+
+	lvds-decoder {
+		compatible = "ti,sn65lvds822", "lvds-decoder";
+		power-supply = <&reg_3v3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				in_lvds1: endpoint {
+					data-mapping = "vesa-24";
+					remote-endpoint = <&ldb_lvds_ch1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l6wh-rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_tft_vcom>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_decoder_out>;
+			};
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <65000>;
+		touchscreen-inverted-y;
+		touchscreen-swapped-x-y;
+		touchscreen-x-plate-ohms = <300>;
+	};
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3600000>;
+	regulator-max-microvolt = <3600000>;
+	voltage-table = <3600000 26>;
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touch>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+	assigned-clock-rates = <0>, <462000000>;
+	status = "okay";
+
+	ports {
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&in_lvds1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK			0x44
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI			0x44
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO			0x44
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09			0x40
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* external pull up */
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25			0x40
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
new file mode 100644
index 000000000000..45c9a6d55bc9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - MI1010AIT-1CP1";
+	compatible = "skov,imx8mp-skov-revb-mi1010ait-1cp1", "fsl,imx8mp";
+
+	panel {
+		compatible = "multi-inno,mi1010ait-1cp";
+		backlight = <&backlight>;
+		power-supply = <&reg_tft_vcom>;
+
+		port {
+			in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+		vcc-supply = <&reg_vdd_3v3>;
+		iovcc-supply = <&reg_vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+	assigned-clock-rates = <0>, <980000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-bd500.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-bd500.dts
new file mode 100644
index 000000000000..b816c6cd3bca
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-bd500.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revC - bd500";
+	compatible = "skov,imx8mp-skov-revc-bd500", "fsl,imx8mp";
+
+	leds {
+		led_system_red: led-3 {
+			label = "bd500:system:red";
+			color = <LED_COLOR_ID_RED>;
+			/* Inverted compared to others due to NMOS inverter */
+			gpios = <&gpioexp 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led_system_green: led-4 {
+			label = "bd500:system:green";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioexp 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led_lan1_red: led-5 {
+			label = "bd500:lan1:act";
+			color = <LED_COLOR_ID_RED>;
+			linux,default-trigger = "netdev";
+			gpios = <&gpioexp 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lan1_green: led-6 {
+			label = "bd500:lan1:link";
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "netdev";
+			gpios = <&gpioexp 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lan2_red: led-7 {
+			label = "bd500:lan2:act";
+			color = <LED_COLOR_ID_RED>;
+			linux,default-trigger = "netdev";
+			gpios = <&gpioexp 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lan2_green: led-8 {
+			label = "bd500:lan2:link";
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "netdev";
+			gpios = <&gpioexp 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-1 {
+			label = "S1";
+			linux,code = <KEY_CONFIG>;
+			gpios = <&gpioexp 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	gpioexp: gpio@20 {
+		compatible = "nxp,pca6408";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_exp>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_vdd_3v3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_exp: gpioexpgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x0
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dts
new file mode 100644
index 000000000000..9a562c011f2c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revC - TIAN G07017";
+	compatible = "skov,imx8mp-skov-revc-tian-g07017", "fsl,imx8mp";
+
+	panel {
+		compatible = "topland,tian-g07017-01";
+		backlight = <&backlight>;
+		power-supply = <&reg_tft_vcom>;
+
+		port {
+			in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5506";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+		vcc-supply = <&reg_vdd_3v3>;
+		iovcc-supply = <&reg_vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+	assigned-clock-rates = <0>, <358400000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi
new file mode 100644
index 000000000000..4e6629f940bf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP SoM";
+	compatible = "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	chosen {
+		bootargs = "earlycon=ec_imx6q,0x30890000,115200";
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	};
+
+	v_1_8: regulator-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	v_3_3: regulator-3-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+/*
+ * Reserve all physical memory from within the first 1GB of DDR address
+ * space to avoid panic on low memory systems.
+ */
+&dsp_reserved {
+	reg = <0 0x6f000000 0 0x1000000>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eqos_pins>, <&phy0_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy0>;
+	snps,force_thresh_dma_mode;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fec_pins>, <&phy1_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-1 = <&i2c1_gpio_pins>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-0 = <&pmic_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+		nxp,i2c-lt-enable;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	som_eeprom: eeprom@50{
+		compatible = "st,24c01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_gpio_pins>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-1 = <&i2c3_gpio_pins>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	/* routed to basler camera connector */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-1 = <&i2c4_gpio_pins>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&iomuxc {
+	eqos_pins: pinctrl-eqos-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+		>;
+	};
+
+	fec_pins: pinctrl-fec-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+		>;
+	};
+
+	i2c1_pins: pinctrl-i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c3
+		>;
+	};
+
+	i2c1_gpio_pins: pinctrl-i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x400001c3
+		>;
+	};
+
+	i2c2_pins: pinctrl-i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x400001c3
+		>;
+	};
+
+	i2c2_gpio_pins: pinctrl-i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x400001c3
+		>;
+	};
+
+	i2c3_pins: pinctrl-i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x400001c3
+		>;
+	};
+
+	i2c3_gpio_pins: pinctrl-i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x400001c3
+		>;
+	};
+
+	i2c4_pins: pinctrl-i2c4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x400001c3
+		>;
+	};
+
+	i2c4_gpio_pins: pinctrl-i2c4-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21			0x400001c3
+		>;
+	};
+
+	phy0_pins: pinctrl-phy0-grp {
+		fsl,pins = <
+			/* RESET_N: weak i/o, open drain, external 1k pull-up */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x20
+			/* INT_N: weak i/o, open drain, internal pull-up */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x160
+		>;
+	};
+
+	phy1_pins: pinctrl-phy-1-grp {
+		fsl,pins = <
+			/* RESET_N: weak i/o, open drain, external 1k pull-up */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x20
+			/* INT_N: weak i/o, open drain, internal pull-up */
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x160
+		>;
+	};
+
+	pmic_pins: pinctrl-pmic-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x41
+		>;
+	};
+
+	uart1_pins: pinctrl-uart1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS		0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS		0x140
+			/* BT_REG_ON */
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x0
+			/* BT_WAKE_DEV */
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x0
+			/* BT_WAKE_HOST */
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x100
+		>;
+	};
+
+	uart2_pins: pinctrl-uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x49
+		>;
+	};
+
+	usdhc1_pins: pinctrl-usdhc1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
+			/* WL_REG_ON */
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x0
+			/* WL_WAKE_HOST */
+			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x100
+		>;
+	};
+
+	usdhc1_100mhz_pins: pinctrl-usdhc1g-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
+		>;
+	};
+
+	usdhc1_200mhz_pins: pinctrl-usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
+		>;
+	};
+
+	usdhc3_pins: pinctrl-usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+		>;
+	};
+
+	usdhc3_100mhz_pins: pinctrl-usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+		>;
+	};
+
+	usdhc3_200mhz_pins: pinctrl-usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+		>;
+	};
+
+	wdog1_pins: pinctrl-wdog1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0x140
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	uart-has-rtscts;
+	/* select 80MHz parent clock to support maximum baudrate 4Mbps */
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		/* Murata 1MW module supports max. 3M baud */
+		max-speed = <3000000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usdhc1_pins>;
+	pinctrl-1 = <&usdhc1_100mhz_pins>;
+	pinctrl-2 = <&usdhc1_200mhz_pins>;
+	vmmc-supply = <&v_3_3>;
+	vqmmc-supply = <&v_1_8>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc3_pins>;
+	pinctrl-1 = <&usdhc3_100mhz_pins>;
+	pinctrl-2 = <&usdhc3_200mhz_pins>;
+	vmmc-supply = <&v_3_3>;
+	vqmmc-supply = <&v_1_8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wdog1_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts
new file mode 100644
index 000000000000..6f9dcd3a75c8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (C) 2025 Toradex */
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx8mp-toradex-smarc.dtsi"
+
+/ {
+	model = "Toradex SMARC iMX8M Plus on Toradex SMARC Development Board";
+	compatible = "toradex,smarc-imx8mp-dev",
+		     "toradex,smarc-imx8mp",
+		     "fsl,imx8mp";
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J64";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	reg_carrier_1p8v: regulator-carrier-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-carrier 1V8";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "tdx-smarc-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+/* SMARC SPI0 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* SMARC GBE0 */
+&eqos {
+	status = "okay";
+};
+
+/* SMARC GBE1 */
+&fec {
+	status = "okay";
+};
+
+/* SMARC CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* SMARC CAN0 */
+&flexcan2 {
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio7>,
+		    <&pinctrl_gpio8>,
+		    <&pinctrl_gpio9>,
+		    <&pinctrl_gpio10>,
+		    <&pinctrl_gpio11>,
+		    <&pinctrl_gpio12>,
+		    <&pinctrl_gpio13>;
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>, <&pinctrl_gpio6>;
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+/* SMARC HDMI */
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+/* SMARC I2C_LCD */
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* I2C on DSI Connector Pins 4/6 */
+		i2c_dsi_0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* I2C on DSI Connector Pins 52/54 */
+		i2c_dsi_1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* SMARC I2C_CAM0 */
+&i2c3 {
+	status = "okay";
+};
+
+/* SMARC I2C_GP */
+&i2c4 {
+	/* Audio Codec */
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1>, <&pinctrl_sai1_mclk>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_carrier_1p8v>;
+		CPVDD-supply = <&reg_carrier_1p8v>;
+		DBVDD-supply = <&reg_carrier_1p8v>;
+		DCVDD-supply = <&reg_carrier_1p8v>;
+		MICVDD-supply = <&reg_carrier_1p8v>;
+	};
+
+	/* On-Carrier Temperature Sensor */
+	temperature-sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	/* On-Carrier EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* SMARC I2C_CAM1 */
+&i2c5 {
+	status = "okay";
+};
+
+/* SMARC I2C_PM */
+&i2c6 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* Fan controller */
+	fan_controller: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#pwm-cells = <2>;
+
+		fan {
+			cooling-levels = <255>;
+			pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
+		};
+	};
+
+	/* Current measurement into module VDD */
+	hwmon@40 {
+		compatible = "ti,ina226";
+		reg = <0x40>;
+		shunt-resistor = <5000>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+/* SMARC PCIE_A, M2 Key B */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* SMARC LCD1_BKLT_PWM */
+&pwm1 {
+	status = "okay";
+};
+
+/* SMARC LCD0_BKLT_PWM */
+&pwm2 {
+	status = "okay";
+};
+
+/* SMARC I2S0 */
+&sai1 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* SMARC HDMI Audio */
+&sound_hdmi {
+	status = "okay";
+};
+
+/* SMARC SER0, RS485. Optional M.2 KEY E */
+&uart1 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* SMARC SER2 */
+&uart2 {
+	status = "okay";
+};
+
+/* SMARC SER1, used as the Linux Console */
+&uart4 {
+	status = "okay";
+};
+
+/* SMARC USB0 */
+&usb3_0 {
+	status = "okay";
+};
+
+/* SMARC USB1..4 */
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* SMARC SDIO */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi
new file mode 100644
index 000000000000..bebe19eb360f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi
@@ -0,0 +1,1308 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (C) 2025 Toradex */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mp.dtsi"
+
+/ {
+	aliases {
+		can0 = &flexcan2;
+		can1 = &flexcan1;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		serial0 = &uart1;
+		serial1 = &uart4;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_id>;
+		id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		label = "USB0";
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb0_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_0_dwc>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sleep>;
+
+		smarc_key_sleep: key-sleep {
+			gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+			label = "SMARC_SLEEP#";
+			wakeup-source;
+			linux,code = <KEY_SLEEP>;
+		};
+
+		smarc_switch_lid: switch-lid {
+			gpios = <&som_ec_gpio_expander 2 GPIO_ACTIVE_LOW>;
+			label = "SMARC_LID#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_en_oc>;
+		gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "USB0_EN_OC#";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_en_oc>;
+		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "USB2_EN_OC#";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
+		gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3V3_SD";
+		startup-delay-us = <20000>;
+	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vsel>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <1800000>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		regulator-name = "PMIC_USDHC_VSELECT";
+		vin-supply = <&reg_sd_3v3_1v8>;
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "CTRL_EN_WIFI";
+		startup-delay-us = <2000>;
+	};
+
+	reserved-memory {
+		linux,cma {
+			size = <0 0x20000000>;
+			alloc-ranges = <0 0x40000000 0 0x80000000>;
+		};
+	};
+
+	sound_hdmi: sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+		status = "disabled";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+/* SMARC SPI0 */
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio4 28 GPIO_ACTIVE_LOW>;
+};
+
+/* SMARC SPI1 */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio4 3 GPIO_ACTIVE_LOW>,
+		   <&gpio3 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@2 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <2>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* SMARC GBE0 */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>,
+		    <&pinctrl_eth_mdio>,
+		    <&pinctrl_eqos_1588_event>;
+	phy-handle = <&eqos_phy>;
+	phy-mode = "rgmii-id";
+	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+
+	mdio: mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+};
+
+/* SMARC GBE1 */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_1588_event>;
+	phy-handle = <&fec_phy>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+};
+
+/* SMARC CAN1 */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* SMARC CAN0 */
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+	gpio-line-names = "SMARC_GPIO7", /* 0 */
+			  "SMARC_GPIO8",
+			  "",
+			  "PMIC_INT#",
+			  "PMIC_USDHC_VSELECT",
+			  "SMARC_GPIO9",
+			  "SMARC_GPIO10",
+			  "SMARC_GPIO11",
+			  "SMARC_GPIO12",
+			  "",
+			  "SMARC_GPIO5", /* 10 */
+			  "",
+			  "SMARC_USB0_EN_OC#",
+			  "SMARC_GPIO13",
+			  "SMARC_USB2_EN_OC#";
+};
+
+&gpio2 {
+	gpio-line-names = "", /* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "", /* 10 */
+			  "",
+			  "SMARC_SDIO_CD#",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SDIO_PWR_EN",
+			  "SMARC_SDIO_WP"; /* 20 */
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds_dsi_sel>;
+	gpio-line-names = "ETH_0_INT#", /* 0 */
+			  "SLEEP#",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "TPM_CS#",
+			  "LVDS_DSI_SEL",
+			  "MCU_INT#",
+			  "GPIO_EX_INT#",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SMB_ALERT#",
+			  "",
+			  "",
+			  "",
+			  "SMARC_I2C_PM_DAT", /* 20 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_I2C_PM_CK";
+};
+
+&gpio4 {
+	gpio-line-names = "SMARC_PCIE_WAKE#", /* 0 */
+			  "",
+			  "",
+			  "SMARC_SPI1_CS1#",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_GPIO4",
+			  "SMARC_PCIE_A_RST#",
+			  "", /* 20 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SPI0_CS1#",
+			  "SMARC_GPIO6";
+};
+
+&gpio5 {
+	gpio-line-names = "", /* 0 */
+			  "",
+			  "SMARC_USB0_OTG_ID",
+			  "SMARC_I2C_CAM1_CK",
+			  "SMARC_I2C_CAM1_DAT",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SPI0_CS0#",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "SMARC_SPI1_CS0#",
+			  "CTRL_I2C_SCL",
+			  "CTRL_I2C_SDA",
+			  "SMARC_I2C_LCD_CK",
+			  "SMARC_I2C_LCD_DAT",
+			  "SMARC_I2C_CAM0_CK",
+			  "SMARC_I2C_CAM0_DAT",
+			  "SMARC_I2C_GP_CK", /* 20 */
+			  "SMARC_I2C_GP_DAT";
+};
+
+/* SMARC HDMI */
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+};
+
+/* On-module I2C */
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+	status = "okay";
+
+	som_gpio_expander: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6408>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio3>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"SMARC_GPIO0",
+			"SMARC_GPIO1",
+			"SMARC_GPIO2",
+			"SMARC_GPIO3",
+			"SMARC_LCD0_VDD_EN",
+			"SMARC_LCD0_BKLT_EN",
+			"SMARC_LCD1_VDD_EN",
+			"SMARC_LCD1_BKLT_EN";
+	};
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "+VDD_SOC (PMIC BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "+VDD_ARM (PMIC BUCK2)";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_3v3: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3 (PMIC BUCK4)";
+			};
+
+			reg_1v8: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8 (PMIC BUCK5)";
+			};
+
+			BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "+VDD_DDR (PMIC BUCK6)";
+			};
+
+			LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "+V1.8_SNVS (PMIC LDO1)";
+			};
+
+			LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8A (PMIC LDO3)";
+			};
+
+			LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3_ADC (PMIC LDO4)";
+			};
+
+			reg_sd_3v3_1v8: LDO5 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V3.3_1.8_SD (PMIC LDO5)";
+			};
+		};
+	};
+
+	embedded-controller@28 {
+		compatible = "toradex,smarc-imx8mp-ec", "toradex,smarc-ec";
+		reg = <0x28>;
+	};
+
+	som_ec_gpio_expander: gpio@29 {
+		compatible = "toradex,ecgpiol16", "nxp,pcal6416";
+		reg = <0x29>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mcu_int>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"SMARC_CHARGER_PRSNT#",
+			"SMARC_CHARGING#",
+			"SMARC_LID#",
+			"SMARC_BATLOW#";
+	};
+
+	rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/* SMARC I2C_LCD */
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	clock-frequency = <100000>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+/* SMARC I2C_CAM0 */
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+/* SMARC I2C_GP */
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+/* SMARC I2C_CAM1 */
+&i2c5 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+/* SMARC I2C_PM */
+&i2c6 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+&mdio {
+	eqos_phy: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+
+	fec_phy: ethernet-phy@2 {
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+/* SMARC PCIE_A */
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+};
+
+/* SMARC LCD1_BKLT_PWM */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd1_bklt_pwm1>;
+};
+
+/* SMARC LCD0_BKLT_PWM */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd0_bklt_pwm2>;
+};
+
+/* SMARC GPIO5 as PWM */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5_pwm>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* SMARC SER0 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+};
+
+/* SMARC SER2 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+/* On-module Bluetooth, optional SMARC SER3 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bt_uart>;
+	uart-has-rtscts;
+	status = "okay";
+
+	som_bt: bluetooth {
+		compatible = "mrvl,88w8997";
+		max-speed = <921600>;
+	};
+};
+
+/* SMARC SER1, used as the Linux Console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+/* SMARC USB0 */
+&usb3_0 {
+	fsl,disable-port-power-control;
+};
+
+/* SMARC USB1..4 */
+&usb3_1 {
+	fsl,disable-port-power-control;
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb1_vbus>;
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	maximum-speed = "high-speed";
+	srp-disable;
+	usb-role-switch;
+
+	port {
+		usb3_0_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+/* On-module Wi-Fi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	keep-power-in-suspend;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
+
+/* SMARC SDIO */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>,
+		    <&pinctrl_usdhc2_cd>,
+		    <&pinctrl_usdhc2_wp>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>,
+		    <&pinctrl_usdhc2_cd>,
+		    <&pinctrl_usdhc2_wp>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>,
+		    <&pinctrl_usdhc2_cd>,
+		    <&pinctrl_usdhc2_wp>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>,
+		    <&pinctrl_usdhc2_cd_sleep>,
+		    <&pinctrl_usdhc2_wp>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+};
+
+/* On-module eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	/* On-module Bluetooth */
+	pinctrl_bt_uart: btuartgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x1c4>, /* WiFi_UART_TXD */
+			   <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x1c4>, /* WiFi_UART_RXD */
+			   <MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS	0x1c4>, /* WiFi_UART_RTS */
+			   <MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS	0x1c4>; /* WiFi_UART_CTS */
+	};
+
+	/* SMARC CAM_MCK */
+	pinctrl_csi_mclk: csimclkgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO15__CCM_CLKO2	0x16>; /* SMARC S6 - CAM_MCK  */
+	};
+
+	/* SMARC SPI0 */
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x1c4>, /* SMARC P45 - SPI0_DIN */
+			   <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x4>,   /* SMARC P46 - SPI0_DO */
+			   <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x4>,   /* SMARC P44 - SPI0_CK */
+			   <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x1c4>, /* SMARC P43 - SPI0_CS0# */
+			   <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x1c4>; /* SMARC P31 - SPI0_CS1# */
+	};
+
+	/* SMARC SPI1 */
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x1c4>, /* SMARC P56 - SPI1_DIN */
+			   <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x4>,   /* SMARC P57 - SPI1_DO */
+			   <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x4>,   /* SMARC P58 - SPI1_CK */
+			   <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x1c4>, /* SMARC P54 - SPI1_CS0# */
+			   <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x1c4>; /* SMARC P55 - SPI1_CS1# */
+	};
+
+	/* ETH_0 RGMII (On-module PHY) */
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90>, /* ETH0_RGMII_RXD0 */
+			   <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90>, /* ETH0_RGMII_RXD1 */
+			   <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90>, /* ETH0_RGMII_RXD2 */
+			   <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90>, /* ETH0_RGMII_RXD3 */
+			   <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90>, /* ETH0_RGMII_RXC */
+			   <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90>, /* ETH0_RGMII_RX_CTL */
+			   <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x16>, /* ETH0_RGMII_TXD0 */
+			   <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x16>, /* ETH0_RGMII_TXD1 */
+			   <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x16>, /* ETH0_RGMII_TXD2 */
+			   <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x16>, /* ETH0_RGMII_TXD3 */
+			   <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16>, /* ETH0_RGMII_TX_CTL */
+			   <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16>; /* ETH0_RGMII_TXC */
+	};
+
+	/* SMARC GBE0_SDP */
+	pinctrl_eqos_1588_event: eqos1588eventgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO09__ENET_QOS_1588_EVENT0_OUT	0x4>; /* SMARC P6 - GBE0_SDP */
+	};
+
+	/* ETH_0_MDIO and ETH_0_INT# shared between ETH_PHY0 and ETH_PHY1 */
+	pinctrl_eth_mdio: ethmdiogrp {
+		fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x2>,  /* ETH_0_MDC */
+			   <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO	0x2>,  /* ETH_0_MDIO */
+			   <MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00		0x80>; /* ETH_0_INT# */
+	};
+
+	/* ETH_1 RGMII (On-module PHY) */
+	pinctrl_fec: fecgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90>, /* ETH1_RGMII_RXD0 */
+			   <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90>, /* ETH1_RGMII_RXD1 */
+			   <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90>, /* ETH1_RGMII_RXD2 */
+			   <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90>, /* ETH1_RGMII_RXD3 */
+			   <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90>, /* ETH1_RGMII_RXC */
+			   <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90>, /* ETH1_RGMII_RX_CTL */
+			   <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x16>, /* ETH1_RGMII_TXD0 */
+			   <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x16>, /* ETH1_RGMII_TXD1 */
+			   <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x16>, /* ETH1_RGMII_TXD2 */
+			   <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x16>, /* ETH1_RGMII_TXD3 */
+			   <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16>, /* ETH1_RGMII_TX_CTL */
+			   <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x16>; /* ETH1_RGMII_TXC */
+	};
+
+	/* SMARC GBE1_SDP */
+	pinctrl_fec_1588_event: fec1588eventgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT	0x4>; /* SMARC P5 - GBE1_SDP */
+	};
+
+	/* SMARC CAN1 */
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_TXC__CAN1_RX	0x154>, /* SMARC P146 - CAN1_RX */
+			   <MX8MP_IOMUXC_SAI2_RXC__CAN1_TX	0x154>; /* SMARC P145 - CAN1_TX */
+	};
+
+	/* SMARC CAN0 */
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX	0x154>, /* SMARC P144 - CAN0_RX */
+			   <MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX	0x154>; /* SMARC P143 - CAN0_TX */
+	};
+
+	/* SMARC GPIO4 */
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x144>; /* SMARC P112 - GPIO4 */
+	};
+
+	/* SMARC GPIO5 */
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x144>; /* SMARC P113 - GPIO5 */
+	};
+
+	/* SMARC GPIO5 as PWM */
+	pinctrl_gpio5_pwm: gpio5pwmgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT	0x12>; /* SMARC P113 - PWM_OUT */
+	};
+
+	/* SMARC GPIO6 */
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x144>; /* SMARC P114 - GPIO6 */
+	};
+
+	/* SMARC GPIO7 */
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00	0x144>; /* SMARC P115 - GPIO7 */
+	};
+
+	/* SMARC GPIO8 */
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01	0x144>; /* SMARC P116 - GPIO8 */
+	};
+
+	/* SMARC GPIO9 */
+	pinctrl_gpio9: gpio9grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05	0x144>; /* SMARC P117 - GPIO9 */
+	};
+
+	/* SMARC GPIO10 */
+	pinctrl_gpio10: gpio10grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06	0x144>; /* SMARC P118 - GPIO10 */
+	};
+
+	/* SMARC GPIO11 */
+	pinctrl_gpio11: gpio11grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07	0x144>; /* SMARC P119 - GPIO11 */
+	};
+
+	/* SMARC GPIO12 */
+	pinctrl_gpio12: gpio12grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08	0x144>; /* SMARC S142 - GPIO12 */
+	};
+
+	/* SMARC GPIO13 */
+	pinctrl_gpio13: gpio13grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x144>; /* SMARC S123 - GPIO13 */
+	};
+
+	/* SMARC HDMI */
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c6>, /* SMARC P105 - HDMI_CTRL_CK */
+			   <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c6>, /* SMARC P106 - HDMI_CTRL_DAT */
+			   <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x180>;      /* SMARC P104 - HDMI_HPD */
+	};
+
+	/* On-module I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL	0x400001c6>, /* CTRL_I2C_SCL */
+			   <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA	0x400001c6>; /* CTRL_I2C_SDA */
+	};
+
+	/* On-module I2C as GPIOs */
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x400001c6>, /* CTRL_I2C_SCL */
+			   <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x400001c6>; /* CTRL_I2C_SDA */
+	};
+
+	/* SMARC I2C_LCD */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL	0x400001c6>, /* SMARC S139 - I2C_LCD_CK */
+			   <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA	0x400001c6>; /* SMARC S140 - I2C_LCD_DAT */
+	};
+
+	/* SMARC I2C_LCD as GPIOs */
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x400001c6>, /* SMARC S139 - I2C_LCD_CK */
+			   <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x400001c6>; /* SMARC S140 - I2C_LCD_DAT */
+	};
+
+	/* SMARC I2C_CAM0 */
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL	0x400001c6>, /* SMARC S5 - I2C_CAM0_CK */
+			   <MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA	0x400001c6>; /* SMARC S7 - I2C_CAM0_DAT */
+	};
+
+	/* SMARC I2C_CAM0 as GPIOs */
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x400001c6>, /* SMARC S5 - I2C_CAM0_CK */
+			   <MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x400001c6>; /* SMARC S7 - I2C_CAM0_DAT */
+	};
+
+	/* SMARC I2C_GP */
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL	0x400001c6>, /* SMARC S48 - I2C_GP_CK */
+			   <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA	0x400001c6>; /* SMARC S49 - I2C_GP_DAT */
+	};
+
+	/* SMARC I2C_GP as GPIOs */
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x400001c6>, /* SMARC S48 - I2C_GP_CK */
+			   <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x400001c6>; /* SMARC S49 - I2C_GP_DAT */
+	};
+
+	/* SMARC I2C_CAM1 */
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA	0x400001c6>, /* SMARC S2 - I2C_CAM1_DAT  */
+			   <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL	0x400001c6>; /* SMARC S1 - I2C_CAM1_CK  */
+	};
+
+	/* SMARC I2C_CAM1 as GPIOs */
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04	0x400001c6>, /* SMARC S2 - I2C_CAM1_DAT  */
+			   <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03	0x400001c6>; /* SMARC S1 - I2C_CAM1_CK  */
+	};
+
+	/* SMARC I2C_PM */
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_CEC__I2C6_SCL	0x400001c6>, /* SMARC P121 - I2C_PM_CK */
+			   <MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA	0x400001c6>; /* SMARC P122 - I2C_PM_DAT */
+	};
+
+	/* SMARC I2C_PM as GPIOs */
+	pinctrl_i2c6_gpio: i2c6gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_CEC__GPIO3_IO28	0x400001c6>, /* SMARC P121 - I2C_PM_CK */
+			   <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20	0x400001c6>; /* SMARC P122 - I2C_PM_DAT */
+	};
+
+	pinctrl_lvds_dsi_sel: lvdsdsiselgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x104>; /* LVDS_DSI_SEL */
+	};
+
+	pinctrl_mcu_int: mcuintgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08	0x1C0>; /* MCU_INT# */
+	};
+
+	/* SMARC LCD1_BKLT_PWM */
+	pinctrl_lcd1_bklt_pwm1: pwm1grp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT	0x12>; /* SMARC S122 - LCD1_BKLT_PWM */
+	};
+
+	/* SMARC LCD0_BKLT_PWM */
+	pinctrl_lcd0_bklt_pwm2: pwm2grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT	0x12>; /* SMARC S141 - LCD0_BKLT_PWM */
+	};
+
+	/* PCAL6408 Interrupt */
+	pinctrl_pcal6408: pcal6408intgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x1c4>; /* GPIO_EX_INT# */
+	};
+
+	/* SMARC PCIE_A */
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x1c0>, /* SMARC S146 - PCIE_WAKE# */
+			   <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x04>;  /* SMARC P75 - PCIE_A_RST# */
+	};
+
+	/* PMIC Interrupt */
+	pinctrl_pmic: pmicintgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x1c4>; /* PMIC_INT# */
+	};
+
+	/* SMARC I2S0 */
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK	0x94>, /* SMARC S42 - I2S0_CK */
+			   <MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC	0x94>, /* SMARC S39 - I2S0_LRCLK */
+			   <MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00	0x94>, /* SMARC S41 - I2S0_SDIN */
+			   <MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00	0x94>; /* SMARC S40 - I2S0_SDOUT */
+	};
+
+	/* SMARC AUDIO_MCK */
+	pinctrl_sai1_mclk: sai1mclkgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK	0x96>; /* SMARC S38 - AUDIO_MCK */
+	};
+
+	/* SMARC I2S2 */
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0x94>, /* SMARC S52 - I2S2_SDIN */
+			   <MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0x94>, /* SMARC S53 - I2S2_CK */
+			   <MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0x94>, /* SMARC S51 - I2S2_SDOUT */
+			   <MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0x94>; /* SMARC S50 - I2S2_LRCLK */
+	};
+
+	/* SMARC SLEEP# */
+	pinctrl_sleep: sleepgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x1C0>; /* SMARC S149 - SLEEP# */
+	};
+
+	/* SMARC SMB_ALERT# */
+	pinctrl_smb_alert: smbalertgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x1C0>; /* SMARC P1 - SMB_ALERT# */
+	};
+
+	/* TPM_CS# */
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x82>; /* TPM_CS# */
+	};
+
+	/* WIFI_BT_WKUP_HOST/TPM_INT# */
+	pinctrl_tpm_irq_wifi_bt_wkup: tpmirq-wifibtwkupgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04	0x16>; /* WIFI_BT_WKUP_HOST/TPM_INT# */
+	};
+
+	/* SMARC SER0 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS	0x1c4>, /* SMARC P132 - SER2_CTS */
+			   <MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS	0x1c4>, /* SMARC P131 - SER2_RTS */
+			   <MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x1c4>, /* SMARC P130 - SER2_RX */
+			   <MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x1c4>; /* SMARC P139 - SER2_TX */
+	};
+
+	/* SMARC SER2 */
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS	0x1c4>, /* SMARC P139 - SER2_CTS */
+			   <MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS	0x1c4>, /* SMARC P138 - SER2_RTS */
+			   <MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x1c4>, /* SMARC P137 - SER2_RX */
+			   <MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x1c4>; /* SMARC P136 - SER2_TX */
+	};
+
+	/* SMARC SER3 */
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x1c4>, /* SMARC P141 - SER3_RX */
+			   <MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x1c4>; /* SMARC P140 - SER3_TX */
+	};
+
+	/* SMARC SER1 */
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x1c4>, /* SMARC P135 - SER1_RX */
+			   <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x1c4>; /* SMARC P134 - SER1_TX */
+	};
+
+	/* SMARC USB0_OTG_ID */
+	pinctrl_usb0_id: usb0idgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02	0x1c4>; /* SMARC P64 - USB0_OTG_ID */
+	};
+
+	/* SMARC USB0_EN_OC# */
+	pinctrl_usb0_en_oc: usb0enocgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x04>; /* SMARC P62 - USB0_EN_OC# */
+	};
+
+	/* On module USB Hub VBUS, or SMARC USB2_EN_OC# depending on assembling */
+	pinctrl_usb1_en_oc: usb1enocgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x04>; /* SMARC P71 - USB2_EN_OC# */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190>, /* WiFi_SDIO_CLK */
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0>, /* WiFi_SDIO_CMD */
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0>, /* WiFi_SDIO_DATA0 */
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0>, /* WiFi_SDIO_DATA1 */
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0>, /* WiFi_SDIO_DATA2 */
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0>; /* WiFi_SDIO_DATA3 */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194>, /* WiFi_SDIO_CLK */
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4>, /* WiFi_SDIO_CMD */
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4>, /* WiFi_SDIO_DATA0 */
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4>, /* WiFi_SDIO_DATA1 */
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4>, /* WiFi_SDIO_DATA2 */
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4>; /* WiFi_SDIO_DATA3 */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196>, /* WiFi_SDIO_CLK */
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6>, /* WiFi_SDIO_CMD */
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6>, /* WiFi_SDIO_DATA0 */
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6>, /* WiFi_SDIO_DATA1 */
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6>, /* WiFi_SDIO_DATA2 */
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6>; /* WiFi_SDIO_DATA3 */
+	};
+
+	/* SMARC SDIO */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0>, /* SMARC P40 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0>, /* SMARC P41 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0>; /* SMARC P42 - SDIO_D3 */
+	};
+
+	/* SMARC SDIO 100MHz */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>, /* SMARC P40 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>, /* SMARC P41 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>; /* SMARC P42 - SDIO_D3 */
+	};
+
+	/* SMARC SDIO 200MHz */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6>, /* SMARC P40 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6>, /* SMARC P41 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6>; /* SMARC P42 - SDIO_D3 */
+	};
+
+	/* SMARC SDIO_CD# */
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4>; /* SMARC P35 - SDIO_CD# */
+	};
+
+	/* SMARC SDIO_CD# */
+	pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x0>; /* SMARC P35 - SDIO_CD# */
+	};
+
+	/* SMARC SDIO_PWR_EN */
+	pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x1c4>; /* SMARC P37 - SDIO_PWR_EN */
+	};
+
+	/* SMARC SDIO Sleep - Avoid backfeeding with removed card power */
+	pinctrl_usdhc2_sleep: usdhc2slpgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x100>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x100>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x100>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x100>, /* SMARC P39 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x100>, /* SMARC P39 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x100>; /* SMARC P39 - SDIO_D3 */
+	};
+
+	pinctrl_usdhc2_vsel: usdhc2vselgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04	0x4>; /* PMIC_USDHC_VSELECT */
+	};
+
+	/* SMARC SDIO_WP */
+	pinctrl_usdhc2_wp: usdhc2wpgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_WP__GPIO2_IO20	0x144>; /* SMARC P33 - SDIO_WP */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190>, /* eMMC_STROBE */
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0>, /* eMMC_DATA5 */
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0>, /* eMMC_DATA6 */
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0>, /* eMMC_DATA7 */
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0>, /* eMMC_DATA0 */
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0>, /* eMMC_DATA1 */
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0>, /* eMMC_DATA2 */
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0>, /* eMMC_DATA3 */
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0>, /* eMMC_DATA4 */
+			   <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190>, /* eMMC_CLK */
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0>; /* eMMC_CMD */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194>, /* eMMC_STROBE */
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4>, /* eMMC_DATA5 */
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4>, /* eMMC_DATA6 */
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>, /* eMMC_DATA7 */
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4>, /* eMMC_DATA0 */
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4>, /* eMMC_DATA1 */
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4>, /* eMMC_DATA2 */
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4>, /* eMMC_DATA3 */
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4>, /* eMMC_DATA4 */
+			   <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>, /* eMMC_CLK */
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>; /* eMMC_CMD */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196>, /* eMMC_STROBE */
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d2>, /* eMMC_DATA5 */
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d2>, /* eMMC_DATA6 */
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d2>, /* eMMC_DATA7 */
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d2>, /* eMMC_DATA0 */
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d2>, /* eMMC_DATA1 */
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d2>, /* eMMC_DATA2 */
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d2>, /* eMMC_DATA3 */
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d2>, /* eMMC_DATA4 */
+			   <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196>, /* eMMC_CLK */
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6>; /* eMMC_CMD */
+	};
+
+	/* SoC Watchdog */
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x4>; /* CTRL_SOC_WDOG */
+	};
+
+	/* On-module Wi-Fi power enable */
+	pinctrl_wifi_pwr_en: wifipwrengrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x104>; /* CTRL_EN_WIFI */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
new file mode 100644
index 000000000000..e5a2b3780215
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+#include "imx8mp-pinfunc.h"
+
+&{/} {
+	/*
+	 * The three camera regulators are controlled by a single GPIO. Declare
+	 * a single regulator for the three supplies.
+	 */
+	reg_cam: regulator-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		/* pad muxing already done in gpio2grp */
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vcc_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	cam24m: clock-cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VANA-supply = <&reg_cam>;
+		VDIG-supply = <&reg_cam>;
+		VDDL-supply = <&reg_cam>;
+		orientation = <2>;
+		rotation = <0>;
+
+		port {
+			sony_imx219: endpoint {
+				remote-endpoint = <&imx8mp_mipi_csi_in>;
+				clock-lanes = <0>;
+				clock-noncontinuous;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&isi_0 {
+	status = "disabled";
+
+	ports {
+		port@0 {
+			/delete-node/ endpoint;
+		};
+	};
+};
+
+&isp_0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			isp0_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+				remote-endpoint = <&mipi_csi_0_out>;
+			};
+		};
+	};
+};
+
+&mipi_csi_0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			imx8mp_mipi_csi_in: endpoint {
+				remote-endpoint = <&sony_imx219>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&mipi_csi_0_out {
+	remote-endpoint = <&isp0_in>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
new file mode 100644
index 000000000000..f7346b3d35fe
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
@@ -0,0 +1,907 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2023-2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Martin Schmiedel
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-tqma8mpql.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MP-RAS314";
+	compatible = "tq,imx8mp-tqma8mpql-mba8mp-ras314", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+	};
+
+	/* X8 */
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_vcc_12v0>;
+		enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	/* X7 + X8 */
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvdsdisplay>;
+		power-supply = <&reg_vcc_3v3>;
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight_lvds>;
+		status = "disabled";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <0>;
+			gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X9";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x38000000>;
+			alloc-ranges = <0 0x40000000 0 0xB0000000>;
+			linux,cma-default;
+		};
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rfkill>;
+		label = "rfkill-pcie-wlan";
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tq-mba8mp-ras314";
+		audio-cpu = <&sai5>;
+		audio-codec = <&tlv320aic3x04>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR";
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>, <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&gpio4>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+
+	gpio-line-names = "WIFI_PMIC_EN", "LVDS_RESET#", "", "",
+			  "", "", "GPIO8", "",
+			  "", "", "", "",
+			  "", "", "GPIO12", "GPIO13",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+
+	wifi-pmic-en-hog {
+		gpio-hog;
+		gpios = <0 0>;
+		output-high;
+		line-name = "WIFI_PMIC_EN";
+	};
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+
+	gpio-line-names = "GPIO22", "GPIO23", "GPIO24", "GPIO25",
+			  "GPIO26", "GPIO27", "CAM_GPIO1", "CAM_GPIO2",
+			  "", "", "GPIO1", "GPIO0",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "TEMP_EVENT#", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "HDMI_OC#", "GPIO14", "GPIO15", "GPIO16",
+			  "GPIO17", "PCIE_WAKE#", "GPIO19", "GPIO20",
+			  "PCIE_PERST#", "", "", "";
+
+	pewake-hog {
+		gpio-hog;
+		gpios = <25 0>;
+		input;
+		line-name = "PCIE_WAKE#";
+	};
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpt1_gpio>,
+		    <&pinctrl_gpt2_gpio>, <&pinctrl_gpt3_gpio>;
+
+	gpio-line-names = "", "GPIO18", "", "GPIO3",
+			  "GPIO2", "GPIO21", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "GPIO5", "GPIO6",
+			  "", "", "GPIO11", "GPIO10",
+			  "GPIO9", "GPIO7", "", "GPIO4",
+			  "", "", "", "";
+};
+
+&gpt1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpt1>;
+	status = "disabled";
+};
+
+&gpt2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpt2>;
+	status = "disabled";
+};
+
+&gpt3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpt3>;
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+/* X5 + X6 Camera & Display interface */
+&i2c2 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* X1 ID_I2C */
+&i2c3 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio2 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tlv320aic3x04>;
+		reg = <0x18>;
+		clock-names = "mclk";
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>;
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		iov-supply = <&reg_vcc_3v3>;
+		ldoin-supply = <&reg_vcc_3v3>;
+	};
+};
+
+/* X1 I2C */
+&i2c5 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio5 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* X1 I2C on GPIO24/GPIO25 */
+&i2c6 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# is connected on MBa8MP-RAS314 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio3>;
+	interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&reg_usdhc2_vqmmc {
+	status = "okay";
+};
+
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* X1 UART1 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	assigned-clocks = <&clk IMX8MP_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart4 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_0 {
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+};
+
+/* X1 SD card on GPIO22-GPIO27 */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	disable-wp;
+	bus-width = <4>;
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x14>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK		0x140>,
+			   <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI		0x140>,
+			   <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO		0x1c0>,
+			   <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x140>,
+			   <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x140>;
+	};
+
+	pinctrl_ecspi3_gpio: ecspi3gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22		0x80>,
+			   <MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23		0x80>,
+			   <MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24		0x80>,
+			   <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x80>,
+			   <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x80>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x40000044>,
+			   <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x40000044>,
+			   <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90>,
+			   <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90>,
+			   <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90>,
+			   <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x12>,
+			   <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x12>,
+			   <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x14>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02				0x100>,
+			   <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03				0x1c0>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x40000044>,
+			   <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x40000044>,
+			   <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x14>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x100>,
+			   <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x1c0>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x14>,
+			   <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x14>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x14>,
+			   <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x14>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__GPIO2_IO00		0x94>,
+			   <MX8MP_IOMUXC_SD1_CMD__GPIO2_IO01		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA2__GPIO2_IO04		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA3__GPIO2_IO05		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x94>;
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x180>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x80>,
+			   /* PCIE_WAKE# */
+			   <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x180>,
+			   <MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26		0x94>,
+			   <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x94>;
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01		0x80>,
+			   <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x80>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c2>,
+			   <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c2>,
+			   <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000010>,
+			   <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000154>;
+	};
+
+	pinctrl_gpt1: gpt1grp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_TXD__GPT1_CLK		0x14>;
+	};
+
+	pinctrl_gpt1_gpio: gpt1gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27		0x80>;
+	};
+
+	pinctrl_gpt2: gpt2grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPT2_CLK		0x14>;
+	};
+
+	pinctrl_gpt2_gpio: gpt2gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x80>;
+	};
+
+	pinctrl_gpt3: gpt3grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__GPT3_CLK		0x14>;
+	};
+
+	pinctrl_gpt3_gpio: gpt3gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x80>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x400001e2>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_RESET_B__I2C3_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_STROBE__I2C3_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10	0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x400001e2>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12	0x400001e2>,
+			   <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x400001e2>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03		0x400001e2>,
+			   <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04		0x400001e2>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c6_gpio: i2c6-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03		0x400001e2>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x80>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x60>,
+			   <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x94>;
+	};
+
+	pinctrl_lvdsdisplay: lvdsdisplaygrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x10>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT		0x14>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO14__PWM3_OUT		0x14>;
+	};
+
+	pinctrl_pwm3_gpio: pwm3grpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x80>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO15__PWM4_OUT		0x14>;
+	};
+
+	pinctrl_pwm4_gpio: pwm4grpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x80>;
+	};
+
+	pinctrl_rfkill: rfkillgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02		0x14>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK		0x94>,
+			   <MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI5_RX_DATA00	0x94>,
+			   <MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00	0x94>,
+			   <MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC	0x94>,
+			   <MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK	0x94>;
+	};
+
+	pinctrl_tlv320aic3x04: tlv320aic3x04grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11		0x180>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX	0x14>,
+			   <MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX		0x14>,
+			   <MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS	0x14>,
+			   <MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS	0x14>;
+	};
+
+	pinctrl_uart1_gpio: uart1gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x80>,
+			   <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x80>,
+			   <MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23		0x80>,
+			   <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x80>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX		0x14>,
+			   <MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX	0x14>,
+			   <MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS	0x14>,
+			   <MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS	0x14>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x140>,
+			   <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x140>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140>,
+			   <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26		0x10>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x192>,
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d2>,
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d2>,
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d2>,
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d2>,
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d2>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x192>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso
new file mode 100644
index 000000000000..5058cd9409c7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+&{/} {
+	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&display {
+	compatible = "auo,g133han01";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dual-lvds-odd-pixels;
+
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dual-lvds-even-pixels;
+
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	assigned-clock-rates = <0>, <988400000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtso
index ea44d605342b..ea44d605342b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtso
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 4240e20d38ac..4eedd00d83b9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -15,6 +15,7 @@
 / {
 	model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
 	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+	chassis-type = "embedded";
 
 	chosen {
 		stdout-path = &uart4;
@@ -55,6 +56,21 @@
 		clock-frequency = <25000000>;
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X29";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon0>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
 		pinctrl-names = "default";
@@ -119,6 +135,18 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X44";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	display: display {
 		/*
 		 * Display is not fixed, so compatible has to be added from
@@ -168,6 +196,13 @@
 		enable-active-high;
 	};
 
+	reg_vcc_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_vcc_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -187,11 +222,6 @@
 		#size-cells = <2>;
 		ranges;
 
-		ocram: ocram@900000 {
-			no-map;
-			reg = <0 0x900000 0 0x70000>;
-		};
-
 		/* global autoconfigured region for contiguous allocations */
 		linux,cma {
 			compatible = "shared-dma-pool";
@@ -204,7 +234,8 @@
 
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "tq-tlv320aic32x";
+		model = "tqm-tlv320aic32";
+		audio-asrc = <&easrc>;
 		audio-cpu = <&sai3>;
 		audio-codec = <&tlv320aic3x04>;
 	};
@@ -447,6 +478,28 @@
 			  "", "", "", "";
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c2 {
 	clock-frequency = <384000>;
 	pinctrl-names = "default", "gpio";
@@ -464,7 +517,7 @@
 		clock-names = "mclk";
 		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
 		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
-		iov-supply = <&reg_vcc_3v3>;
+		iov-supply = <&reg_vcc_1v8>;
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
@@ -508,6 +561,10 @@
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 &pcf85063 {
 	/* RTC_EVENT# is connected on MBa8MPxL */
 	pinctrl-names = "default";
@@ -547,6 +604,10 @@
 	status = "okay";
 };
 
+&reg_usdhc2_vqmmc {
+	status = "okay";
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
@@ -602,7 +663,6 @@
 &usb3_1 {
 	fsl,disable-port-power-control;
 	fsl,permanently-attached;
-	dr_mode = "host";
 	status = "okay";
 };
 
@@ -626,13 +686,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		label = "X29";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon0>;
-		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
@@ -930,8 +987,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
@@ -940,8 +996,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
@@ -950,8 +1005,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
index ebc29a950ba9..9716f24f7c6e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2021-2022 TQ-Systems GmbH
- * Author: Alexander Stein <alexander.stein@tq-group.com>
+ * Copyright 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
  */
 
 #include "imx8mp.dtsi"
@@ -15,22 +16,18 @@
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
 
-	/* identical to buck4_reg, but should never change */
-	reg_vcc3v3: regulator-vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	/* e-MMC IO, needed for HS modes */
-	reg_vcc1v8: regulator-vcc1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V8";
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vqmmc>;
+		regulator-name = "V_SD2";
 		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		vin-supply = <&ldo5_reg>;
+		status = "disabled";
 	};
 };
 
@@ -38,6 +35,10 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&easrc {
+	status = "okay";
+};
+
 &flexspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexspi0>;
@@ -45,12 +46,17 @@
 
 	flash0: flash@0 {
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <80000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5_reg>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
@@ -172,17 +178,21 @@
 		read-only;
 		reg = <0x53>;
 		pagesize = <16>;
-		vcc-supply = <&reg_vcc3v3>;
+		vcc-supply = <&buck4_reg>;
 	};
 
 	m24c64: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
-		vcc-supply = <&reg_vcc3v3>;
+		vcc-supply = <&buck4_reg>;
 	};
 };
 
+&usdhc2 {
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
@@ -192,8 +202,8 @@
 	non-removable;
 	no-sd;
 	no-sdio;
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc1v8>;
+	vmmc-supply = <&buck4_reg>;
+	vqmmc-supply = <&buck5_reg>;
 	status = "okay";
 };
 
@@ -232,6 +242,10 @@
 		fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x10>;
 	};
 
+	pinctrl_reg_usdhc2_vqmmc: regusdhc2vqmmcgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04		0xc0>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
 			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso
new file mode 100644
index 000000000000..e3965caca6be
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2025 GOcontroll B.V.
+ * Author: Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mp-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	model = "GOcontroll Moduline Display with BOE av101hdt-a10 display";
+
+	panel {
+		compatible = "boe,av101hdt-a10";
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_panel>;
+		pinctrl-names = "default";
+		power-supply = <&reg_3v3_per>;
+		reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel_lvds_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+
+	reg_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		power-supply = <&reg_6v4>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-c-vbus";
+	};
+};
+
+&iomuxc {
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09
+				MX8MP_DSE_X1
+		>;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+	assigned-clock-rates = <0>, <1054620000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_lvds_in>;
+			};
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+
+	connector {
+		compatible = "usb-c-connector";
+		data-role = "host";
+		pd-disable;
+		vbus-supply = <&reg_vbus>;
+
+		port {
+			high_speed_ep: endpoint {
+				remote-endpoint = <&usb1_hs_ep>;
+			};
+		};
+	};
+
+	port {
+		usb1_hs_ep: endpoint {
+			remote-endpoint = <&high_speed_ep>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso
new file mode 100644
index 000000000000..3eb665ce9d5d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2025 GOcontroll B.V.
+ * Author: Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mp-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	model = "GOcontroll Moduline Display with BOE av123z7m-n17 display";
+
+	panel {
+		compatible = "boe,av123z7m-n17";
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_panel>;
+		pinctrl-names = "default";
+		power-supply = <&reg_3v3_per>;
+		reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-odd-pixels;
+
+				panel_in0: endpoint {
+					remote-endpoint = <&lvds1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dual-lvds-even-pixels;
+
+				panel_in1: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* sn65dsi85 */
+	bridge@2d {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2d>;
+		enable-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_lvds_bridge>;
+		pinctrl-names = "default";
+		vcc-supply = <&reg_1v8_per>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dsi_lvds_bridge_in: endpoint {
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lvds0_out: endpoint {
+					remote-endpoint = <&panel_in1>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				lvds1_out: endpoint {
+					remote-endpoint = <&panel_in0>;
+				};
+			};
+		};
+	};
+
+	/* max25014 @ 0x6f */
+};
+
+&iomuxc {
+	pinctrl_lvds_bridge: lvdsbridgegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09
+				MX8MP_DSE_X1
+		>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	/*
+	 * burst has to be at least 2x dsi clock that the sn65dsi85 expects
+	 * display pixelclock * bpp / lanes / 2 = dsi clock
+	 * 88.000.000 * 24 / 4 / 2 = 264.000.000
+	 * range gets rounded up to 265.000.000 - 270.000.000
+	 * 267.500.000 * 2 = 535.000.000
+	 */
+	samsung,burst-clock-frequency = <535000000>;
+	samsung,esc-clock-frequency = <12000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			mipi_dsi_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = < &dsi_lvds_bridge_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
new file mode 100644
index 000000000000..88ad422c2760
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
@@ -0,0 +1,525 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2025 GOcontroll B.V.
+ * Author: Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-tx8p-ml81.dtsi"
+
+/ {
+	compatible = "gocontroll,moduline-display", "fsl,imx8mp";
+	chassis-type = "embedded";
+	hardware = "Moduline Display V1.06";
+	model = "GOcontroll Moduline Display baseboard";
+
+	aliases {
+		can0 = &flexcan1;
+		can1 = &flexcan2;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		rtc0 = &rtc_pcf; /* i2c rtc is the main rtc */
+		rtc1 = &snvs_rtc;
+		spi0 = &ecspi2; /* spidev number compatibility */
+		spi1 = &ecspi1; /* spidev number compatibility */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	external-sensor-supply {
+		compatible = "regulator-output";
+		vout-supply = <&reg_5v0_sensor>;
+	};
+
+	flexcan1_phy: can-phy0 {
+		compatible = "ti,tcan1051", "ti,tcan1042";
+		#phy-cells = <0>;
+		pinctrl-0 = <&pinctrl_flexcan1_stby>;
+		pinctrl-names = "default";
+		max-bitrate = <5000000>;
+		standby-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	flexcan2_phy: can-phy1 {
+		compatible = "ti,tcan1051", "ti,tcan1042";
+		#phy-cells = <0>;
+		pinctrl-0 = <&pinctrl_flexcan2_stby>;
+		pinctrl-names = "default";
+		max-bitrate = <5000000>;
+		standby-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1v8_per: regulator-1v8-per {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_reg_1v8>;
+		pinctrl-names = "default";
+		power-supply = <&reg_3v3_per>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "1v8-per";
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_3v3_per: regulator-3v3-per {
+		compatible = "regulator-fixed";
+		power-supply = <&reg_6v4>;
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3-per";
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		power-supply = <&reg_6v4>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "5v0";
+	};
+
+	reg_5v0_sensor: regulator-5v0-sensor {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_reg_5v0_sensor>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "5v0-supply-external-sensor";
+		gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_6v4: regulator-6v4 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <6400000>;
+		regulator-min-microvolt = <6400000>;
+		regulator-name = "6v4";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,name = "tas2505-audio";
+		simple-audio-card,routing = "Speaker", "DAC";
+		simple-audio-card,widgets = "Speaker", "Speaker External";
+
+		simple-audio-card,codec {
+			sound-dai = <&tas2505>;
+		};
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai6>;
+		};
+	};
+
+	wifi_powerseq: wifi-powerseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-0 = <&pinctrl_wl_reg>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <500000>;
+		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>,
+		   <&gpio1 11 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	connector@0 {
+		compatible = "gocontroll,moduline-module-slot";
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		i2c-bus = <&i2c2>;
+		reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+		slot-number = <1>;
+		spi-max-frequency = <54000000>;
+		sync-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		vddhpp-supply = <&reg_6v4>;
+		vddp-supply = <&reg_5v0>;
+		vdd-supply = <&reg_3v3_per>;
+	};
+
+	connector@1 {
+		compatible = "gocontroll,moduline-module-slot";
+		reg = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		i2c-bus = <&i2c2>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		slot-number = <2>;
+		spi-max-frequency = <54000000>;
+		sync-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		vddhpp-supply = <&reg_6v4>;
+		vddp-supply = <&reg_5v0>;
+		vdd-supply = <&reg_3v3_per>;
+	};
+
+	adc@2 {
+		compatible = "microchip,mcp3004";
+		reg = <2>;
+		spi-max-frequency = <2300000>;
+		vref-supply = <&reg_vdd_3v3>;
+	};
+};
+
+&flexcan1 {
+	phys = <&flexcan1_phy>;
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&flexcan2 {
+	phys = <&flexcan2_phy>;
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tas2505: audio-codec@18 {
+		compatible = "ti,tas2505";
+		reg = <0x18>;
+		clocks = <&clk IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		aic32x4-gpio-func = <0xff 0xff 0xff 0xff 0xff>;
+		av-supply = <&reg_1v8_per>;
+		dv-supply = <&reg_1v8_per>;
+		iov-supply = <&reg_vdd_3v3>;
+		pinctrl-0 = <&pinctrl_tas_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	};
+
+	rtc_pcf: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+
+		clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI
+				MX8MP_DSE_X4
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO
+				(MX8MP_DSE_X4 | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK
+				MX8MP_DSE_X4
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			 MX8MP_IOMUXC_SPDIF_RX__CAN1_RX
+				 (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			 MX8MP_IOMUXC_SPDIF_TX__CAN1_TX
+				 (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_flexcan1_stby: flexcan1stbygrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_TXD__CAN2_RX
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_UART3_RXD__CAN2_TX
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_flexcan2_stby: flexcan2stbygrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_usdhc2: pinctrlusdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+		>;
+	};
+
+	pinctrl_reg_1v8: reg-1v8-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_reg_5v0_sensor: reg-5v0-sensorgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+		>;
+	};
+
+	pinctrl_tas_reset: tasresetgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B
+				(MX8MP_DSE_X6 | MX8MP_HYS_SCHMITT)
+		>;
+	};
+
+	pinctrl_wl_int: wlintgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13
+				(MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_wl_reg: wlreggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19
+				MX8MP_DSE_X1
+		>;
+	};
+};
+
+&sai6 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI6>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	pinctrl-0 = <&pinctrl_sai6>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt";
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wakeup";
+		device-wakeup-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		max-speed = <921600>;
+		pinctrl-0 = <&pinctrl_bt>;
+		pinctrl-names = "default";
+		shutdown-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&reg_3v3_per>;
+		vddio-supply = <&reg_3v3_per>;
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "peripheral";
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <50000000>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	mmc-pwrseq = <&wifi_powerseq>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	sd-uhs-sdr25;
+	vmmc-supply = <&reg_3v3_per>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+		pinctrl-0 = <&pinctrl_wl_int>;
+		pinctrl-names = "default";
+		brcm,board-type = "GOcontroll,moduline";
+	};
+};
+
+&wdog1 {
+	pinctrl-0 = <&pinctrl_wdog>;
+	pinctrl-names = "default";
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi
new file mode 100644
index 000000000000..fe8ba16eb40e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2020 Lothar Waßmann <LW@KARO-electronics.de>
+ * 2025 Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	/* PHY regulator */
+	regulator-3v3-etn {
+		compatible = "regulator-fixed";
+		gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&pinctrl_reg_3v3_etn>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3-etn";
+		vin-supply = <&reg_vdd_3v3>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&eqos {
+	assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+			  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+			  <&clk IMX8MP_CLK_ENET_QOS>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+				 <&clk IMX8MP_SYS_PLL2_100M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	assigned-clock-rates = <266000000>, <100000000>, <50000000>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-1 = <&pinctrl_eqos_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pinctrl_ethphy_rst_b>;
+		pinctrl-names = "default";
+		reset-delay-us = <25000>;
+		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk IMX8MP_CLK_ENET_QOS>;
+			pinctrl-0 = <&pinctrl_ethphy_int_b>;
+			pinctrl-names = "default";
+			smsc,disable-energy-detect;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_152",
+			  "SODIMM_42",
+			  "PMIC_WDOG_B SODIMM_153",
+			  "PMIC_IRQ_B",
+			  "SODIMM_154",
+			  "SODIMM_155",
+			  "SODIMM_156",
+			  "SODIMM_157",
+			  "SODIMM_158",
+			  "SODIMM_159",
+			  "SODIMM_161",
+			  "SODIMM_162",
+			  "SODIMM_34",
+			  "SODIMM_36",
+			  "SODIMM_27",
+			  "SODIMM_28",
+			  "ENET_MDC",
+			  "ENET_MDIO",
+			  "",
+			  "ENET_XTAL1/CLKIN",
+			  "ENET_TXD1",
+			  "ENET_TXD0",
+			  "ENET_TXEN",
+			  "ENET_POWER",
+			  "ENET_COL/CRS_DV",
+			  "ENET_RXER",
+			  "ENET_RXD0",
+			  "ENET_RXD1",
+			  "",
+			  "",
+			  "",
+			  "";
+};
+
+&gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_51",
+			  "SODIMM_57",
+			  "SODIMM_56",
+			  "SODIMM_52",
+			  "SODIMM_53",
+			  "SODIMM_54",
+			  "SODIMM_55",
+			  "SODIMM_15",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "";
+};
+
+&gpio3 {
+	gpio-line-names = "",
+			  "",
+			  "EMMC_DS",
+			  "EMMC_DAT5",
+			  "EMMC_DAT6",
+			  "EMMC_DAT7",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EMMC_DAT0",
+			  "EMMC_DAT1",
+			  "EMMC_DAT2",
+			  "EMMC_DAT3",
+			  "",
+			  "EMMC_DAT4",
+			  "",
+			  "EMMC_CLK",
+			  "EMMC_CMD",
+			  "SODIMM_75",
+			  "SODIMM_145",
+			  "SODIMM_163",
+			  "SODIMM_164",
+			  "SODIMM_165",
+			  "SODIMM_143",
+			  "SODIMM_144",
+			  "SODIMM_72",
+			  "SODIMM_73",
+			  "SODIMM_74",
+			  "SODIMM_93",
+			  "",
+			  "";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_98",
+			  "SODIMM_99",
+			  "SODIMM_100",
+			  "SODIMM_101",
+			  "SODIMM_45",
+			  "SODIMM_43",
+			  "SODIMM_105",
+			  "SODIMM_106",
+			  "SODIMM_107",
+			  "SODIMM_108",
+			  "SODIMM_104",
+			  "SODIMM_103",
+			  "SODIMM_115",
+			  "SODIMM_114",
+			  "SODIMM_113",
+			  "SODIMM_112",
+			  "SODIMM_109",
+			  "SODIMM_110",
+			  "SODIMM_95",
+			  "SODIMM_96",
+			  "SODIMM_97",
+			  "ENET_nINT",
+			  "ENET_nRST",
+			  "SODIMM_84",
+			  "SODIMM_87",
+			  "SODIMM_86",
+			  "SODIMM_85",
+			  "SODIMM_83",
+			  "",
+			  "SODIMM_66",
+			  "SODIMM_65",
+			  "";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_81",
+			  "SODIMM_146",
+			  "SODIMM_48",
+			  "SODIMM_46",
+			  "SODIMM_47",
+			  "SODIMM_44",
+			  "SODIMM_49",
+			  "",
+			  "SODIMM_70",
+			  "SODIMM_69",
+			  "PMIC_SCL",
+			  "PMIC_SDA",
+			  "SODIMM_41",
+			  "SODIMM_40",
+			  "SODIMM_148",
+			  "SODIMM_149",
+			  "SODIMM_150",
+			  "SODIMM_151",
+			  "SODIMM_60",
+			  "SODIMM_59",
+			  "SODIMM_64",
+			  "SODIMM_63",
+			  "SODIMM_62",
+			  "SODIMM_61",
+			  "SODIMM_68",
+			  "SODIMM_67",
+			  "",
+			  "";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "vdd-soc";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "vdd-core";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "3v3";
+			};
+
+			reg_nvcc_nand: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "nvcc-nand";
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "nvcc-dram";
+			};
+
+			reg_snvs_1v8: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "snvs-1v8";
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-always-on;
+				regulator-max-microvolt = <1150000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "LDO2";
+			};
+
+			reg_vdda_1v8: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vdda-1v8";
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "LDO4";
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK
+				(MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_SION)
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC
+				(MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO
+				(MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST)
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST)
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0
+				(MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1
+				(MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER
+				(MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST)
+		>;
+	};
+
+	pinctrl_eqos_sleep: eqos-sleep-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_ethphy_int_b: ethphy-int-bgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21
+				(MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+		>;
+	};
+
+	pinctrl_ethphy_rst_b: ethphy-rst-bgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03
+				(MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_reg_3v3_etn: reg-3v3-etngrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
+				(MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
+				(MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&reg_vdd_3v3>;
+	voltage-ranges = <3300 3300>;
+	vqmmc-supply = <&reg_nvcc_nand>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts
new file mode 100644
index 000000000000..9ecec1a41878
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts
@@ -0,0 +1,907 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Ultratronik
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "NXP i.MX8MPlus Ultratronik MMI_A53 board";
+	compatible = "ultratronik,imx8mp-ultra-mach-sbc", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		rtc0 = &hwrtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-sbu-mux {
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sbu_mux>;
+		select-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		orientation-switch;
+
+		port {
+			usb3_data_ss: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* Wakeup */
+			label = "Wakeup";
+			linux,code = <KEY_WAKEUP>;
+			pinctrl-0 = <&pinctrl_gpio_key_wakeup>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "red";
+			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green";
+			gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "yellow";
+			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_usba_vbus: regulator-usba-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1>;
+		regulator-name = "usb-A-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slb9670: tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <32000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_slb9670>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		<&gpio1 8 GPIO_ACTIVE_LOW>,
+		<&gpio1 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	nfc-transceiver@1 {
+		compatible = "st,st95hf";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nfc>;
+		spi-max-frequency = <100000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		enable-gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x2>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"#TPM_IRQ", "GPIO1", "", "#PMIC_INT",
+		"SD2_VSEL", "#TOUCH_IRQ", "#NFC_INT_I", "#NFC_INT",
+		"#SPI2_CS2", "#SPI2_CS3", "#RTS4", "",
+		"USB_PWR", "GPIO2", "GPIO3", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "#SD2_CD", "", "", "",
+		"", "", "", "", "#USB-C_EN", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "DISP_POW", "GPIO4",
+		"#", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"BKL_POW", "#ETH1_INT", "#TPM_RES", "#PCAP_RES",
+		"", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "#ETH0_INT", "#USB-C_ALERT",
+		"#USB-C_SEL", "", "", "",
+		"LED_RED", "LED_GREEN", "LED_YELLOW", "#WAKEUP",
+		"", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "#SPI1_CS", "", "", "", "#SPI2_CS1", "", "",
+		"", "", "", "", "ENA_KAM", "ENA_LED", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+
+		/*
+		 * i.MX 8M Plus Data Sheet for Consumer Products
+		 * 3.1.4 Operating ranges
+		 * MIMX8ML8DVNLZAB
+		 */
+		regulators {
+			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {	/* VDD_ARM */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {	/* +3V3 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5: BUCK5 {	/* +1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {	/* DRAM_1V1 */
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3: LDO3 {	/* VDDA_1P8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {	/* ENET_2V5 */
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo5: LDO5 {	/* NVCC_SD2 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	crypto@35 {
+		compatible = "atmel,atecc508a";
+		reg = <0x35>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	hwrtc: rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+		epson,vdet-disable;
+		trickle-diode-disable;
+	};
+
+	tcpc@52 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ptn5110>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 5000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c5 {	/* HDMI EDID bus */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	/* system console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	/* expansion port serial connection */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usba_vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	snps,hsphy_interface = "utmi";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1_cs: ecspi1-cs-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40	/* #SPI1_CS */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x82
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2-cs-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40	/* #SPI2_CS */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x40	/* #SPI2_CS2 */
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x40	/* #SPI2_CS3 */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+		>;
+	};
+
+	pinctrl_eqos: eqos-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x0
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x0
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x10	/* #ETH0_INT */
+		>;
+	};
+
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC               0x0
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO              0x0
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0         0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1         0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2         0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3         0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC          0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL      0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0         0x16
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1         0x16
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2         0x16
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3         0x16
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL      0x16
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC         0x16
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01               0x10	/* #ETH1_INT */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_gpio_key_wakeup: gpio-key-wakeup-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x40	/* #WAKEUP */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpio-leds-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x40	/* LED_RED */
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x40	/* LED_GREEN */
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26		0x40	/* LED_YELLOW */
+		>;
+	};
+
+	pinctrl_hdmi: hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+
+	pinctrl_hog: hog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01	0x40	/* GPIO1 */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x40	/* GPIO2 */
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x40	/* GPIO3 */
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23	0x40	/* GPIO4 */
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x40	/* ENA_KAM */
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x40	/* ENA_LED */
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x40	/* #PCAP_RES */
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x40	/* #RTS4 */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c0
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0xc0
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0xc0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x400001c0
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x400001c0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0xc0
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0xc0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0xc2
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0xc2
+		>;
+	};
+
+	pinctrl_i2c5: i2c5-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x400000c4
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x400000c4
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0xc4
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0xc4
+		>;
+	};
+
+	pinctrl_nfc: nfc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x40	/* NFC_INT_I */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x40	/* NFC_INT */
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x40	/* #PMIC_INT */
+		>;
+	};
+
+	pinctrl_ptn5110: ptn5110-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x1c4	/* #USB-C_ALERT */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT		0x116
+		>;
+	};
+
+	pinctrl_pwm2: pwm2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0x116	/* EXT_PWM */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: reg-usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_sbu_mux: sbu-mux-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x16	/* #USB-C_SEL */
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20			0x16	/* #USB-C_EN */
+		>;
+	};
+
+	pinctrl_slb9670: slb9670-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x40	/* #TPM_IRQ */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x40	/* #TPM_RES */
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x40
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x40
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x40
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_usb1: usb1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x40	/* USB_PWR */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0	/* SD2_VSEL */
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0	/* SD2_VSEL */
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0	/* SD2_VSEL */
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x40	/* #SD3_RESET */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x192
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d2
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d2
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d2
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d2
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d2
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d2
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d2
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d2
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d2
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x192
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6	/* #WDOG */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
new file mode 100644
index 000000000000..36d3eb865202
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Variscite Ltd.
+ */
+
+#include "imx8mp-var-som.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-MX8M-PLUS on Symphony-Board";
+	compatible = "variscite,var-som-mx8mp-symphony", "variscite,var-som-mx8mp", "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
new file mode 100644
index 000000000000..29f080904482
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Variscite Ltd.
+ *
+ * Author: Tarang Raval <tarang.raval@siliconsignals.io>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-MX8M Plus module";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+	        compatible = "gpio-leds";
+
+	        led-0 {
+	                function = LED_FUNCTION_POWER;
+	                gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>;
+	                linux,default-trigger = "heartbeat";
+	        };
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+	        compatible = "regulator-fixed";
+	        regulator-name = "VSD_3V3";
+	        regulator-min-microvolt = <3300000>;
+	        regulator-max-microvolt = <3300000>;
+	        gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	        enable-active-high;
+	        startup-delay-us = <100>;
+	        off-on-delay-us = <12000>;
+	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		regulator-name = "VSD_VSEL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0x0 1800000 0x1>;
+		vin-supply = <&ldo5>;
+	};
+
+	reg_phy_supply: regulator-phy-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "phy-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_phy_vddio: regulator-phy-vddio {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	/*
+	 * The required RGMII TX and RX 2ns delays are implemented directly
+	 * in hardware via passive delay elements on the SOM PCB.
+	 * No delay configuration is needed in software via PHY driver.
+	 */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <100000>;
+			vddio-supply = <&reg_phy_vddio>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+        clock-frequency = <400000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c3>;
+        status = "okay";
+
+	/* GPIO expander */
+	pca9534: gpio@20 {
+	        compatible = "nxp,pca9534";
+	        reg = <0x20>;
+	        pinctrl-names = "default";
+	        pinctrl-0 = <&pinctrl_pca9534>;
+	        gpio-controller;
+	        #gpio-cells = <2>;
+	        interrupt-parent = <&gpio1>;
+	        interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+	        wakeup-source;
+
+	        usb3-sata-sel-hog {
+	                gpio-hog;
+	                gpios = <4 0>;
+	                output-low;
+	                line-name = "usb3_sata_sel";
+	        };
+	};
+};
+
+/* Console */
+&uart2 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_uart2>;
+        status = "okay";
+};
+
+/* SD-card */
+&usdhc2 {
+        pinctrl-names = "default", "state_100mhz", "state_200mhz";
+        pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+        pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+        pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+        cd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+        vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+        bus-width = <4>;
+        status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20					0x10
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10				0x150
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL				0x400001c2
+			MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+	        fsl,pins = <
+	                MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                                 0x400001c2
+	                MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA                                 0x400001c2
+	        >;
+	};
+
+	pinctrl_pca9534: pca9534grp {
+	        fsl,pins = <
+	                MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                             0xc0
+	        >;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04				0x1c0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+	        fsl,pins = <
+		        MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                            0x40
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                            0x40
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+	        fsl,pins = <
+	                MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14                             0x1c4
+	                MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22                               0x10
+	                MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12                               0xc0
+	        >;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+	        fsl,pins = <
+	                MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                                0x190
+	                MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                                0x1d0
+	                MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                            0x1d0
+	                MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                            0x1d0
+	                MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                            0x1d0
+	                MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                            0x1d0
+	        >;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+	        fsl,pins = <
+	                MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                                0x194
+	                MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                                0x1d4
+	                MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                            0x1d4
+	                MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                            0x1d4
+	                MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                            0x1d4
+	                MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                            0x1d4
+	        >;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+	        fsl,pins = <
+	                MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                                0x196
+	                MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                                0x1d6
+	                MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                            0x1d6
+	                MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                            0x1d6
+	                MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                            0x1d6
+	                MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                            0x1d6
+	        >;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B				0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
index 560c68e4da6d..cbf0c9a740fa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
@@ -5,11 +5,14 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/net/ti-dp83867.h>
 
 / {
 	aliases {
 		ethernet0 = &eqos;
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
 	};
 
 	memory@40000000 {
@@ -102,6 +105,25 @@
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_AMBER>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
 		};
 	};
 };
@@ -260,7 +282,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -412,6 +434,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
index bf47b5e9dd8c..4bf818873fe3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
@@ -8,6 +8,21 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -48,8 +63,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <25000000>;
+	};
 };
 
 &gpio4 {
@@ -132,13 +154,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "Type-C";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
@@ -216,6 +235,7 @@
 			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
 			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
 			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
index f942e949084b..cf747ec6fa16 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -8,6 +8,26 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	aliases {
+		ethernet1 = &eth1;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		vbus-supply = <&reg_usb1_vbus>;
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -83,8 +103,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <25000000>;
+	};
 };
 
 &gpio4 {
@@ -129,6 +156,38 @@
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			pcie@3,0 {
+				reg = <0x1800 0 0 0 0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				eth1: ethernet@0,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
 };
 
 /* GPS */
@@ -161,7 +220,6 @@
 };
 
 &usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 
@@ -175,13 +233,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "otg";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
@@ -285,6 +340,7 @@
 			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
 			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
 			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
index b0d42b18c5ce..5eb114d2360a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -8,6 +8,26 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	aliases {
+		ethernet1 = &eth1;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		vbus-supply = <&reg_usb1_vbus>;
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -100,9 +120,9 @@
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
@@ -148,6 +168,38 @@
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			pcie@4,0 {
+				reg = <0x2000 0 0 0 0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				eth1: ethernet@0,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
 };
 
 /* GPS */
@@ -167,7 +219,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm4330-bt";
-		shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -187,7 +239,6 @@
 };
 
 &usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 
@@ -201,13 +252,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "otg";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso
index 270a9114da97..7d9fcdee58a7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso
@@ -11,7 +11,19 @@
 /plugin/;
 
 &{/} {
-	compatible = "gw,imx8mp-gw74xx", "fsl,imx8mp";
+	reg_vana: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	reg_vddl: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
 
 	reg_cam: regulator-cam {
 		pinctrl-names = "default";
@@ -41,6 +53,8 @@
 		reg = <0x10>;
 		clocks = <&cam24m>;
 		VDIG-supply = <&reg_cam>;
+		VANA-supply = <&reg_vana>;
+		VDDL-supply = <&reg_vddl>;
 
 		port {
 			/* MIPI CSI-2 bus endpoint */
@@ -62,12 +76,25 @@
 	status = "okay";
 
 	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		port@0 {
+			reg = <0>;
+
 			mipi_csi_0_in: endpoint {
 				remote-endpoint = <&imx219_to_mipi_csi2>;
 				data-lanes = <1 2>;
 			};
 		};
+
+		port@1 {
+			reg = <1>;
+
+			mipi_csi_0_out: endpoint {
+				remote-endpoint = <&isi_in_0>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 2ab9f4cc12cc..12de7cf1e853 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/net/ti-dp83867.h>
 
 #include "imx8mp.dtsi"
 
@@ -24,6 +25,8 @@
 		ethernet4 = &lan3;
 		ethernet5 = &lan4;
 		ethernet6 = &lan5;
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
 	};
 
 	chosen {
@@ -35,6 +38,21 @@
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
 
+	connector {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -181,11 +199,9 @@
 	status = "okay";
 
 	tpm@0 {
-		compatible = "tcg,tpm_tis-spi";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x0>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
@@ -212,6 +228,29 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0x0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_AMBER>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
 		};
 	};
 };
@@ -262,7 +301,7 @@
 &gpio3 {
 	gpio-line-names =
 		"", "", "", "", "", "", "m2_rst", "",
-		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "m2_wdis2#", "",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
 };
@@ -271,7 +310,7 @@
 	gpio-line-names =
 		"", "", "m2_off#", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
-		"", "", "m2_wdis#", "", "", "", "", "",
+		"", "", "m2_wdis1#", "", "", "", "", "",
 		"", "", "", "", "", "", "", "rs485_en";
 };
 
@@ -391,6 +430,12 @@
 				label = "vdd_dram";
 			};
 
+			channel@9e {
+				gw,mode = <2>;
+				reg = <0x9e>;
+				label = "vdd_1p0";
+			};
+
 			channel@a2 {
 				gw,mode = <2>;
 				reg = <0xa2>;
@@ -438,7 +483,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -694,13 +739,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		label = "Type-C";
-		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
@@ -769,13 +811,14 @@
 			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09	0x40000040 /* DIO0 */
 			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x40000040 /* DIO1 */
 			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x40000040 /* M2SKT_OFF# */
-			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x40000150 /* M2SKT_WDIS# */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x40000150 /* M2SKT_WDIS1# */
 			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40000040 /* M2SKT_PIN20 */
 			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11	0x40000040 /* M2SKT_PIN22 */
 			MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13	0x40000150 /* PCIE1_WDIS# */
 			MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14	0x40000150 /* PCIE3_WDIS# */
 			MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18	0x40000150 /* PCIE2_WDIS# */
 			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x40000040 /* M2SKT_RST# */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x40000150 /* M2KST_WDIS2# */
 			MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01	0x40000104 /* UART_TERM */
 			MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31	0x40000104 /* UART_RS485 */
 			MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00	0x40000104 /* UART_HALF */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx-2x.dts
index 4a1bbbbe19e6..7ca68df9e516 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx-2x.dts
@@ -7,11 +7,11 @@
 
 #include "imx8mp.dtsi"
 #include "imx8mp-venice-gw702x.dtsi"
-#include "imx8mp-venice-gw7905.dtsi"
+#include "imx8mp-venice-gw75xx.dtsi"
 
 / {
-	model = "Gateworks Venice GW7905-2x i.MX8MP Development Kit";
-	compatible = "gateworks,imx8mp-gw7905-2x", "fsl,imx8mp";
+	model = "Gateworks Venice GW75xx-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw75xx-2x", "fsl,imx8mp";
 
 	chosen {
 		stdout-path = &uart2;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx.dtsi
index 0d40cb0f05f6..f90b293c85fc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx.dtsi
@@ -104,6 +104,16 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		st,drdy-int-pin = <1>;
+	};
+
 	eeprom@52 {
 		compatible = "atmel,24c32";
 		reg = <0x52>;
@@ -204,6 +214,12 @@
 		>;
 	};
 
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08	0x159
+		>;
+	};
+
 	pinctrl_gpio_leds: gpioledgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x6	/* LEDG */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts
new file mode 100644
index 000000000000..597813308630
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw82xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW82xx-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw82xx-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi
new file mode 100644
index 000000000000..2b86cc62a41a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	aliases {
+		ethernet1 = &eth1;
+		fsa1 = &fsa0;
+		fsa2 = &fsa1;
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_vbus: regulator-usb2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-name = "usb2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VDD_3V3_SD";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <12000>;
+		startup-delay-us = <100>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>,	/* CS0 onboard TPM */
+		   <&gpio5 13 GPIO_ACTIVE_LOW>, /* CS1 off-board J32 SPI */
+		   <&gpio1 12 GPIO_ACTIVE_LOW>, /* CS3 off-board J52 FSA1 */
+		   <&gpio4 26 GPIO_ACTIVE_LOW>; /* CS2 off-board J51 FSA2 */
+	status = "okay";
+
+	tpm@0 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "fsa2_gpio1", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"dio1", "fsa1_gpio2", "", "dio0",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "rs485_en", "rs485_term",
+		"fsa2_gpio2", "fsa1_gpio1", "", "rs485_half",
+		"", "", "", "";
+};
+
+&i2c2 {
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		st,drdy-int-pin = <1>;
+	};
+
+	magnetometer@1e {
+		compatible = "st,lis2mdl";
+		reg = <0x1e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* J30 */
+		fsa1: i2c@0 {
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fsa2i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				interrupt-parent = <&gpio4>;
+				interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c02";
+				reg = <0x54>;
+				pagesize = <16>;
+			};
+
+			eeprom@55 {
+				compatible = "atmel,24c02";
+				reg = <0x55>;
+				pagesize = <16>;
+			};
+		};
+
+		/* J29 */
+		fsa0: i2c@1 {
+			reg = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fsa1i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				interrupt-parent = <&gpio4>;
+				interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c02";
+				reg = <0x54>;
+				pagesize = <16>;
+			};
+
+			eeprom@55 {
+				compatible = "atmel,24c02";
+				reg = <0x55>;
+				pagesize = <16>;
+			};
+		};
+
+		/* J33 */
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			pcie@7,0 {
+				reg = <0x3800 0 0 0 0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				eth1: ethernet@0,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* USB1 - FSA1 */
+&usb3_0 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* USB2 - USB3.0 Hub */
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDIO 1.8V */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; /* CD is active high */
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08	0x40000146 /* DIO1 */
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11	0x40000146 /* DIO0 */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x40000106 /* RS485_HALF */
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x40000106 /* RS485_EN */
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23	0x40000106 /* RS485_TERM */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x150	/* IRQ# */
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX		0x154
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX		0x154
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_fsa1i2c: fsa1i2cgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14	0x1d0		/* FSA1_ALERT# */
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25	0x400001d0	/* FSA1_GPIO1 */
+			MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09	0x400001d0	/* FSA1_GPIO2 */
+		>;
+	};
+
+	pinctrl_fsa2i2c: fsa2i2cgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04	0x1d0		/* FSA2_ALERT# */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x400001d0	/* FSA2_GPIO1 */
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24	0x400001d0	/* FSA2_GPIO2 */
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x140	/* IRQ# */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106	/* PERST# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x146
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12	0x146	/* USBHUB_RST# */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0xd0
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0xd0
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0xd0
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140	/* J32_CS */
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140	/* TPM_CS */
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x140	/* FSA1_CS */
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26	0x140	/* FSA2_CS */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
index 7e9e4b13b5c5..1493319aa748 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -4,22 +4,34 @@
  */
 
 / {
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X21";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,bitclock-master = <&codec_dai>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&codec_dai>;
 		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,name = "imx8mp-wm8904";
+		simple-audio-card,name = "verdin-wm8904";
 		simple-audio-card,routing =
 			"Headphone Jack", "HPOUTL",
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";
 
@@ -32,6 +44,30 @@
 			sound-dai = <&sai1>;
 		};
 	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "HUB_PWR_EN";
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "PCIE_1_PWR_EN";
+		startup-delay-us = <100000>;
+	};
+};
+
+/* Verdin HDMI_1 Audio */
+&aud2htx {
+	status = "okay";
 };
 
 &backlight {
@@ -70,6 +106,32 @@
 	status = "okay";
 };
 
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
+/* Verdin HDMI_1 */
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 /* Current measurement into module VCC */
 &hwmon {
 	status = "okay";
@@ -110,8 +172,18 @@
 	};
 };
 
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
 /* Verdin PCIE_1 */
 &pcie {
+	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };
 
@@ -138,6 +210,11 @@
 	vin-supply = <&reg_3p3v>;
 };
 
+/* We support turning off sleep moci on Dahlia */
+&reg_force_sleep_moci {
+	status = "disabled";
+};
+
 /* Verdin I2S_1 */
 &sai1 {
 	assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
@@ -147,6 +224,11 @@
 	status = "okay";
 };
 
+/* Verdin HDMI_1 Audio */
+&sound_hdmi {
+	status = "okay";
+};
+
 /* Verdin UART_1 */
 &uart1 {
 	status = "okay";
@@ -181,6 +263,25 @@
 	status = "okay";
 };
 
+&usb_dwc3_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb_hub_3_0: usb-hub@1 {
+		compatible = "usb424,5744";
+		reg = <1>;
+		peer-hub = <&usb_hub_2_0>;
+		vdd-supply = <&reg_usb_hub>;
+	};
+
+	usb_hub_2_0: usb-hub@2 {
+		compatible = "usb424,2744";
+		reg = <2>;
+		peer-hub = <&usb_hub_3_0>;
+		vdd-supply = <&reg_usb_hub>;
+	};
+};
+
 /* Verdin SD_1 */
 &usdhc2 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
index a509b2b7fa85..a38e7c947a42 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
@@ -4,6 +4,18 @@
  */
 
 / {
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X37";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	reg_eth2phy: regulator-eth2phy {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -22,7 +34,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&codec_dai>;
 		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,name = "imx8mp-nau8822";
+		simple-audio-card,name = "verdin-nau8822";
 		simple-audio-card,routing =
 			"Headphones", "LHP",
 			"Headphones", "RHP",
@@ -52,6 +64,11 @@
 	};
 };
 
+/* Verdin HDMI_1 Audio */
+&aud2htx {
+	status = "okay";
+};
+
 &backlight {
 	power-supply = <&reg_3p3v>;
 };
@@ -93,11 +110,37 @@
 	status = "okay";
 };
 
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 &gpio_expander_21 {
 	status = "okay";
 	vcc-supply = <&reg_1p8v>;
 };
 
+/* Verdin HDMI_1 */
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 /* Current measurement into module VCC */
 &hwmon {
 	status = "okay";
@@ -131,6 +174,15 @@
 	};
 };
 
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
 /* Verdin PCIE_1 */
 &pcie {
 	status = "okay";
@@ -168,6 +220,11 @@
 	status = "okay";
 };
 
+/* Verdin HDMI_1 Audio */
+&sound_hdmi {
+	status = "okay";
+};
+
 /* Verdin UART_1, connector X50 through RS485 transceiver */
 &uart1 {
 	linux,rs485-enabled-at-boot-time;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-ivy.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-ivy.dtsi
new file mode 100644
index 000000000000..db1b4ee7728c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-ivy.dtsi
@@ -0,0 +1,512 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ *
+ * Common dtsi for Verdin IMX8MP SoM on Ivy carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus
+ * https://www.toradex.com/products/carrier-board/ivy-carrier-board
+ */
+
+#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	/* AIN1 Voltage w/o AIN1_MODE gpio control */
+	ain1_voltage_unmanaged: voltage-divider-ain1 {
+		compatible = "voltage-divider";
+		#io-channel-cells = <1>;
+		io-channels = <&ivy_adc1 0>;
+		full-ohms = <19>;
+		output-ohms = <1>;
+	};
+
+	/* AIN1 Current w/o AIN1_MODE gpio control */
+	ain1_current_unmanaged: current-sense-shunt-ain1 {
+		compatible = "current-sense-shunt";
+		#io-channel-cells = <0>;
+		io-channels = <&ivy_adc1 1>;
+		shunt-resistor-micro-ohms = <100000000>;
+	};
+
+	/* AIN1_MODE - SODIMM 216 */
+	ain1_mode_mux_ctrl: mux-controller-0 {
+		compatible = "gpio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio5>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	ain1-voltage {
+		compatible = "io-channel-mux";
+		channels = "ain1_voltage", "";
+		io-channels = <&ain1_voltage_unmanaged 0>;
+		io-channel-names = "parent";
+		mux-controls = <&ain1_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	ain1-current {
+		compatible = "io-channel-mux";
+		channels = "", "ain1_current";
+		io-channels = <&ain1_current_unmanaged>;
+		io-channel-names = "parent";
+		mux-controls = <&ain1_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	/* AIN2 Voltage w/o AIN2_MODE gpio control */
+	ain2_voltage_unmanaged: voltage-divider-ain2 {
+		compatible = "voltage-divider";
+		#io-channel-cells = <1>;
+		io-channels = <&ivy_adc2 0>;
+		full-ohms = <19>;
+		output-ohms = <1>;
+	};
+
+	/* AIN2 Current w/o AIN2_MODE gpio control */
+	ain2_current_unmanaged: current-sense-shunt-ain2 {
+		compatible = "current-sense-shunt";
+		#io-channel-cells = <0>;
+		io-channels = <&ivy_adc2 1>;
+		shunt-resistor-micro-ohms = <100000000>;
+	};
+
+	/* AIN2_MODE - SODIMM 218 */
+	ain2_mode_mux_ctrl: mux-controller-1 {
+		compatible = "gpio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio6>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	ain2-voltage {
+		compatible = "io-channel-mux";
+		channels = "ain2_voltage", "";
+		io-channels = <&ain2_voltage_unmanaged 0>;
+		io-channel-names = "parent";
+		mux-controls = <&ain2_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	ain2-current {
+		compatible = "io-channel-mux";
+		channels = "", "ain2_current";
+		io-channels = <&ain2_current_unmanaged>;
+		io-channel-names = "parent";
+		mux-controls = <&ain2_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ivy_leds>;
+
+		/* D7 Blue - SODIMM 30 - LEDs.GPIO1 */
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D7 Green - SODIMM 32 - LEDs.GPIO2 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D7 Red - SODIMM 34 - LEDs.GPIO3 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Blue - SODIMM 36 - LEDs.GPIO4 */
+		led-3 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Green - SODIMM 54 - LEDs.GPIO5 */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Red - SODIMM 44 - LEDs.GPIO6 */
+		led-5 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D9 Blue - SODIMM 46 - LEDs.GPIO7 */
+		led-6 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&gpio5 01 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D9 Red - SODIMM 48 - LEDs.GPIO8 */
+		led-7 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_3v2_ain1: regulator-3v2-ain1 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3200000>;
+		regulator-min-microvolt = <3200000>;
+		regulator-name = "+3V2_AIN1";
+	};
+
+	reg_3v2_ain2: regulator-3v2-ain2 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3200000>;
+		regulator-min-microvolt = <3200000>;
+		regulator-name = "+3V2_AIN2";
+	};
+
+	/* Ivy Power Supply Input Voltage */
+	ivy-input-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_1 */
+		io-channels = <&verdin_som_adc 7>;
+		full-ohms = <204700>; /* 200k + 4.7k */
+		output-ohms = <4700>;
+	};
+
+	ivy-5v-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_2 */
+		io-channels = <&verdin_som_adc 6>;
+		full-ohms = <39000>; /* 27k + 12k */
+		output-ohms = <12000>;
+	};
+
+	ivy-3v3-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_3 */
+		io-channels = <&verdin_som_adc 5>;
+		full-ohms = <54000>; /* 27k + 27k */
+		output-ohms = <27000>;
+	};
+
+	ivy-1v8-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_4 */
+		io-channels = <&verdin_som_adc 4>;
+		full-ohms = <39000>; /* 12k + 27k */
+		output-ohms = <27000>;
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	pinctrl-0 = <&pinctrl_ecspi1>,
+		    <&pinctrl_gpio1>,
+		    <&pinctrl_gpio4>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+		   <&gpio1 0 GPIO_ACTIVE_LOW>,
+		   <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		spi-max-frequency = <18500000>;
+	};
+
+	fram@2 {
+		compatible = "fujitsu,mb85rs256", "atmel,at25";
+		reg = <2>;
+		address-width = <16>;
+		size = <32768>;
+		spi-max-frequency = <33000000>;
+		pagesize = <1>;
+	};
+};
+
+/* EEPROM on Ivy */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&eqos {
+	status = "okay";
+};
+
+/* Verdin ETH_2 */
+&fec {
+	phy-handle = <&ethphy2>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&verdin_eth2_mdio {
+	ethphy2: ethernet-phy@2 {
+		reg = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+/* Verdin CAN_1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&flexcan2 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", /* 0 */
+		"GPIO2", /* Verdin GPIO_2 - SODIMM 208 */
+		"",
+		"",
+		"",
+		"GPIO3", /* Verdin GPIO_3 - SODIMM 210 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", /* 0 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"DIG_1", /* SODIMM 56 */
+		"DIG_2", /* SODIMM 58 */
+		"REL1",  /* SODIMM 60 */
+		"REL2",  /* SODIMM 62 */
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"REL4", /* SODIMM 66 */
+		"",
+		"REL3", /* SODIMM 64 */
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+};
+
+/* Temperature sensor on Ivy */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_4 CSI */
+&i2c3 {
+	status = "okay";
+
+	ivy_adc1: adc@40 {
+		compatible = "ti,ads1119";
+		reg = <0x40>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio7>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&reg_3v2_ain1>;
+		dvdd-supply = <&reg_3v2_ain1>;
+		vref-supply = <&reg_3v2_ain1>;
+		#address-cells = <1>;
+		#io-channel-cells = <1>;
+		#size-cells = <0>;
+
+		/* AIN1 0-33V Voltage Input */
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+		};
+
+		/* AIN1 0-20mA Current Input */
+		channel@1 {
+			reg = <1>;
+			diff-channels = <2 3>;
+		};
+	};
+
+	ivy_adc2: adc@41 {
+		compatible = "ti,ads1119";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio8>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&reg_3v2_ain2>;
+		dvdd-supply = <&reg_3v2_ain2>;
+		vref-supply = <&reg_3v2_ain2>;
+		#address-cells = <1>;
+		#io-channel-cells = <1>;
+		#size-cells = <0>;
+
+		/* AIN2 0-33V Voltage Input */
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+		};
+
+		/* AIN2 0-20mA Current Input */
+		channel@1 {
+			reg = <1>;
+			diff-channels = <2 3>;
+		};
+	};
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>, <&pinctrl_gpio3>,
+		    <&pinctrl_ivy_dig_inputs>, <&pinctrl_ivy_relays>;
+
+	pinctrl_ivy_dig_inputs: ivydiginputsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x96>, /* SODIMM 56 */
+			<MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x96>; /* SODIMM 58 */
+	};
+
+	pinctrl_ivy_leds: ivyledsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25	0x16>, /* SODIMM 30 */
+			<MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22	0x16>, /* SODIMM 32 */
+			<MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19	0x16>, /* SODIMM 34 */
+			<MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x16>, /* SODIMM 36 */
+			<MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31	0x16>, /* SODIMM 44 */
+			<MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01	0x16>, /* SODIMM 46 */
+			<MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30	0x16>, /* SODIMM 48 */
+			<MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x16>; /* SODIMM 54 */
+	};
+
+	pinctrl_ivy_relays: ivyrelaysgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08	0x16>, /* SODIMM 60 */
+			<MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x16>, /* SODIMM 62 */
+			<MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x16>, /* SODIMM 64 */
+			<MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x16>; /* SODIMM 66 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
new file mode 100644
index 000000000000..11cf3bdc95c4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MP SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X14";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin HDMI_1 Audio */
+&aud2htx {
+	status = "okay";
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio3 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&eqos {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* Verdin HDMI_1 */
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin HDMI_1 Audio */
+&sound_hdmi {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x106>, /* SODIMM 52 */
+			<MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x106>, /* SODIMM 54 */
+			<MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x106>, /* SODIMM 56 */
+			<MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x106>; /* SODIMM 58 */
+	};
+
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x82>; /* SODIMM 64 */
+	};
+
+	pinctrl_tpm_irq: tpmirqgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x16>; /* SODIMM 66 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-ivy.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-ivy.dts
new file mode 100644
index 000000000000..cb49690050ff
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-ivy.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-ivy.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Ivy";
+	compatible = "toradex,verdin-imx8mp-nonwifi-ivy",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000000..6a536a4964bb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Mallow Board";
+	compatible = "toradex,verdin-imx8mp-nonwifi-mallow",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
index 91d597391b7c..2ee91f31e7f0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
@@ -41,8 +41,7 @@
 	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
 		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
 		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
-		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
-		    <&pinctrl_hdmi_hog>;
+		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>;
 };
 
 /*
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-ivy.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-ivy.dts
new file mode 100644
index 000000000000..22b8fe70b36d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-ivy.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-ivy.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Ivy";
+	compatible = "toradex,verdin-imx8mp-wifi-ivy",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts
new file mode 100644
index 000000000000..08b7aef3fdde
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Mallow Board";
+	compatible = "toradex,verdin-imx8mp-wifi-mallow",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
index ef94f9a57e20..cae06cb67cd3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
@@ -55,8 +55,7 @@
 	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
 		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
 		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
-		    <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>,
-		    <&pinctrl_hdmi_hog>;
+		    <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>;
 };
 
 /* On-module Bluetooth */
@@ -76,7 +75,6 @@
 &usdhc1 {
 	bus-width = <4>;
 	keep-power-in-suspend;
-	max-frequency = <100000000>;
 	non-removable;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wifi_ctrl>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
index db1722f0d80e..cc389cda2af2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
@@ -6,6 +6,18 @@
 #include <dt-bindings/leds/common.h>
 
 / {
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J15";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	/* Carrier Board Supply +V1.8 */
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
@@ -73,6 +85,11 @@
 	};
 };
 
+/* Verdin HDMI_1 Audio */
+&aud2htx {
+	status = "okay";
+};
+
 &backlight {
 	power-supply = <&reg_3p3v>;
 };
@@ -100,6 +117,32 @@
 	status = "okay";
 };
 
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
+/* Verdin HDMI_1 */
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &hwmon_temp {
 	status = "okay";
 };
@@ -117,6 +160,15 @@
 	status = "okay";
 };
 
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
 /* Verdin PCIE_1 */
 &pcie {
 	status = "okay";
@@ -145,6 +197,11 @@
 	vin-supply = <&reg_3p3v>;
 };
 
+/* Verdin HDMI_1 Audio */
+&sound_hdmi {
+	status = "okay";
+};
+
 /* Verdin UART_1 */
 &uart1 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index 04f2083c4ab2..d43ba0087126 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -45,6 +45,23 @@
 		status = "disabled";
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_1_id>;
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb1_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -60,6 +77,14 @@
 		};
 	};
 
+	sound_hdmi: sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+		status = "disabled";
+	};
+
 	/* Carrier Board Supplies */
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
@@ -99,6 +124,22 @@
 		vin-supply = <&reg_vdd_3v3>;
 	};
 
+	/*
+	 * By default we enable CTRL_SLEEP_MOCI#, this is required to have
+	 * peripherals on the carrier board powered.
+	 * If more granularity or power saving is required this can be disabled
+	 * in the carrier board device tree files.
+	 */
+	reg_force_sleep_moci: regulator-force-sleep-moci {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "CTRL_SLEEP_MOCI#";
+	};
+
 	reg_usb1_vbus: regulator-usb1-vbus {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -134,7 +175,7 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_SD";
-		startup-delay-us = <2000>;
+		startup-delay-us = <20000>;
 	};
 
 	reserved-memory {
@@ -208,7 +249,6 @@
 
 	mtl_rx_setup: rx-queues-config {
 		snps,rx-queues-to-use = <5>;
-		snps,rx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -243,7 +283,6 @@
 
 	mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <5>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -281,7 +320,7 @@
 	pinctrl-0 = <&pinctrl_fec>;
 	pinctrl-1 = <&pinctrl_fec_sleep>;
 
-	mdio {
+	verdin_eth2_mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -422,16 +461,13 @@
 			  "SODIMM_256",
 			  "SODIMM_48",
 			  "SODIMM_44";
+};
 
-	ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <29 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-	};
+/* Verdin HDMI_1 */
+&hdmi_tx {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
 };
 
 /* On-module I2C */
@@ -442,6 +478,7 @@
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 	status = "okay";
 
 	pca9450: pmic@25 {
@@ -535,7 +572,7 @@
 				regulator-name = "On-module +V3.3_ADC (LDO4)";
 			};
 
-			LDO5 {
+			reg_vdd_sdio: LDO5 {
 				regulator-max-microvolt = <3300000>;
 				regulator-min-microvolt = <1800000>;
 				regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
@@ -555,11 +592,12 @@
 		vs-supply = <&reg_vdd_1v8>;
 	};
 
-	adc@49 {
+	verdin_som_adc: adc@49 {
 		compatible = "ti,ads1015";
 		reg = <0x49>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		#io-channel-cells = <1>;
 
 		/* Verdin I2C_1 (ADC_4 - ADC_3) */
 		channel@0 {
@@ -619,7 +657,7 @@
 	};
 
 	eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 	};
@@ -627,13 +665,13 @@
 
 /* Verdin I2C_2_DSI */
 &i2c2 {
-	/* Lower frequency to avoid DDC/EDID issues with certain displays/screens. */
-	clock-frequency = <10000>;
+	clock-frequency = <400000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
 	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 
 	atmel_mxt_ts_mezzanine: touch-mezzanine@4a {
 		compatible = "atmel,maxtouch";
@@ -647,8 +685,6 @@
 	};
 };
 
-/* TODO: Verdin I2C_3_HDMI */
-
 /* Verdin I2C_4_CSI */
 &i2c3 {
 	clock-frequency = <400000>;
@@ -657,6 +693,7 @@
 	pinctrl-1 = <&pinctrl_i2c3_gpio>;
 	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 };
 
 /* Verdin I2C_1 */
@@ -667,6 +704,7 @@
 	pinctrl-1 = <&pinctrl_i2c4_gpio>;
 	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 
 	gpio_expander_21: gpio-expander@21 {
 		compatible = "nxp,pcal6416";
@@ -732,7 +770,7 @@
 
 	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
 	eeprom_display_adapter: eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 		status = "disabled";
@@ -740,13 +778,24 @@
 
 	/* EEPROM on carrier board */
 	eeprom_carrier_board: eeprom@57 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x57>;
 		status = "disabled";
 	};
 };
 
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
 /* Verdin PCIE_1 */
 &pcie {
 	pinctrl-names = "default";
@@ -835,15 +884,10 @@
 	srp-disable;
 	usb-role-switch;
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-		label = "Type-C";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_1_id>;
-		self-powered;
-		type = "micro";
-		vbus-supply = <&reg_usb1_vbus>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
@@ -873,6 +917,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
 	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_vdd_sdio>;
 };
 
 /* On-module eMMC */
@@ -1090,12 +1135,10 @@
 			<MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x1c4>;	/* SODIMM 252 */
 	};
 
-	pinctrl_hdmi_hog: hdmihoggrp {
+	pinctrl_hdmi: hdmigrp {
 		fsl,pins =
-			<MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000019>,	/* SODIMM 63 */
-			<MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3>,	/* SODIMM 59 */
-			<MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3>,	/* SODIMM 57 */
-			<MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000019>;	/* SODIMM 61 */
+			<MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x140>,	/* SODIMM 63 */
+			<MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x180>;	/* SODIMM 61 */
 	};
 
 	/* On-module I2C */
@@ -1150,6 +1193,19 @@
 			<MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21		0x400001c6>;	/* SODIMM 12 */
 	};
 
+	/* Verdin I2C_3_HDMI */
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x400001c6>,	/* SODIMM 59 */
+			<MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x400001c6>;	/* SODIMM 57 */
+	};
+
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0x400001c6>,	/* SODIMM 59 */
+			<MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0x400001c6>;	/* SODIMM 57 */
+	};
+
 	/* Verdin I2S_2_BCLK (TOUCH_RESET#) */
 	pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp {
 		fsl,pins =
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 1264da6012f9..a3de6604e29f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/imx8mp-clock.h>
 #include <dt-bindings/power/imx8mp-power.h>
 #include <dt-bindings/reset/imx8mp-reset.h>
+#include <dt-bindings/reset/imx8mp-reset-audiomix.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interconnect/fsl,imx8mp.h>
@@ -47,11 +48,24 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+				wakeup-latency-us = <1500>;
+			};
+		};
+
 		A53_0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -65,13 +79,13 @@
 			nvmem-cell-names = "speed_grade";
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -83,13 +97,13 @@
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -101,13 +115,13 @@
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -119,6 +133,7 @@
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_L2: l2-cache0 {
@@ -262,8 +277,9 @@
 		ranges;
 
 		dsp_reserved: dsp@92400000 {
-			reg = <0 0x92400000 0 0x2000000>;
+			reg = <0 0x92400000 0 0x1000000>;
 			no-map;
+			status = "disabled";
 		};
 	};
 
@@ -282,7 +298,7 @@
 		cpu-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
-			thermal-sensors = <&tmu 0>;
+			thermal-sensors = <&tmu 1>;
 			trips {
 				cpu_alert0: trip0 {
 					temperature = <85000>;
@@ -304,7 +320,10 @@
 						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -312,7 +331,7 @@
 		soc-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
-			thermal-sensors = <&tmu 1>;
+			thermal-sensors = <&tmu 0>;
 			trips {
 				soc_alert0: trip0 {
 					temperature = <85000>;
@@ -334,7 +353,10 @@
 						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -726,6 +748,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mp-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -786,6 +810,23 @@
 						reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
 					};
 
+					pgc_mlmix: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
+						clocks = <&clk IMX8MP_CLK_ML_AXI>,
+							 <&clk IMX8MP_CLK_ML_AHB>,
+							 <&clk IMX8MP_CLK_NPU_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
+								  <&clk IMX8MP_CLK_ML_AXI>,
+								  <&clk IMX8MP_CLK_ML_AHB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <1000000000>,
+								       <800000000>,
+								       <400000000>;
+					};
+
 					pgc_audio: power-domain@5 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>;
@@ -793,10 +834,10 @@
 							 <&clk IMX8MP_CLK_AUDIO_AXI>;
 						assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
 								  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>;
-						assigned-clock-parents =  <&clk IMX8MP_SYS_PLL1_800M>,
-									  <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
 						assigned-clock-rates = <400000000>,
-								       <600000000>;
+								       <800000000>;
 					};
 
 					pgc_gpu2d: power-domain@6 {
@@ -818,6 +859,12 @@
 						assigned-clock-rates = <800000000>, <400000000>;
 					};
 
+					pgc_vpumix: power-domain@8 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
+						clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
+					};
+
 					pgc_gpu3d: power-domain@9 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_GPU3D>;
@@ -833,60 +880,57 @@
 							 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
 					};
 
-					pgc_mipi_phy2: power-domain@16 {
+					pgc_vpu_g1: power-domain@11 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
 					};
 
-					pgc_hsiomix: power-domain@17 {
+					pgc_vpu_g2: power-domain@12 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
-						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
-							 <&clk IMX8MP_CLK_HSIO_ROOT>;
-						assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
-						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
-						assigned-clock-rates = <500000000>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
 					};
 
-					pgc_ispdwp: power-domain@18 {
+					pgc_vpu_vc8000e: power-domain@13 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
-						clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
 					};
 
-					pgc_vpumix: power-domain@19 {
+					pgc_hdmimix: power-domain@14 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
-						clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_HDMIMIX>;
+						clocks = <&clk IMX8MP_CLK_HDMI_ROOT>,
+							 <&clk IMX8MP_CLK_HDMI_APB>;
+						assigned-clocks = <&clk IMX8MP_CLK_HDMI_AXI>,
+								  <&clk IMX8MP_CLK_HDMI_APB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,
+									 <&clk IMX8MP_SYS_PLL1_133M>;
+						assigned-clock-rates = <500000000>, <133000000>;
 					};
 
-					pgc_vpu_g1: power-domain@20 {
+					pgc_hdmi_phy: power-domain@15 {
 						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
-						clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_HDMI_PHY>;
 					};
 
-					pgc_vpu_g2: power-domain@21 {
+					pgc_mipi_phy2: power-domain@16 {
 						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
-						clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
 					};
 
-					pgc_vpu_vc8000e: power-domain@22 {
+					pgc_hsiomix: power-domain@17 {
 						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
-						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+							 <&clk IMX8MP_CLK_HSIO_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+						assigned-clock-rates = <500000000>;
 					};
 
-					pgc_mlmix: power-domain@24 {
+					pgc_ispdwp: power-domain@18 {
 						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
-						clocks = <&clk IMX8MP_CLK_ML_AXI>,
-							 <&clk IMX8MP_CLK_ML_AHB>,
-							 <&clk IMX8MP_CLK_NPU_ROOT>;
+						reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
+						clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
 					};
 				};
 			};
@@ -1204,6 +1248,7 @@
 				reg = <0x30e60000 0x10000>;
 				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 				#mbox-cells = <2>;
+				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_MU2_ROOT>;
 				status = "disabled";
 			};
 
@@ -1231,7 +1276,7 @@
 				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_DUMMY>,
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
 					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MP_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -1245,7 +1290,7 @@
 				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_DUMMY>,
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
 					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MP_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -1259,7 +1304,7 @@
 				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_DUMMY>,
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
 					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MP_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -1501,6 +1546,41 @@
 					status = "disabled";
 				};
 
+				aud2htx: aud2htx@30cb0000 {
+					compatible = "fsl,imx8mp-aud2htx";
+					reg = <0x30cb0000 0x10000>;
+					interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_AUD2HTX_IPG>;
+					clock-names = "bus";
+					dmas = <&sdma2 26 2 0>;
+					dma-names = "tx";
+					status = "disabled";
+				};
+
+				xcvr: xcvr@30cc0000 {
+					compatible = "fsl,imx8mp-xcvr";
+					reg = <0x30cc0000 0x800>,
+					      <0x30cc0800 0x400>,
+					      <0x30cc0c00 0x080>,
+					      <0x30cc0e00 0x080>;
+					reg-names = "ram", "regs", "rxfifo",
+						    "txfifo";
+					interrupts = /* XCVR IRQ 0 */
+						     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+						     /* XCVR IRQ 1 */
+						     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+						     /* XCVR PHY - SPDIF wakeup IRQ */
+						     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_EARC_IPG>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_EARC_PHY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>;
+					clock-names = "ipg", "phy", "spba", "pll_ipg";
+					dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>;
+					dma-names = "rx", "tx";
+					resets = <&audio_blk_ctrl 0>;
+					status = "disabled";
+				};
 			};
 
 			sdma3: dma-controller@30e00000 {
@@ -1529,17 +1609,22 @@
 				compatible = "fsl,imx8mp-audio-blk-ctrl";
 				reg = <0x30e20000 0x10000>;
 				#clock-cells = <1>;
+				#reset-cells = <1>;
 				clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
 					 <&clk IMX8MP_CLK_SAI1>,
 					 <&clk IMX8MP_CLK_SAI2>,
 					 <&clk IMX8MP_CLK_SAI3>,
 					 <&clk IMX8MP_CLK_SAI5>,
 					 <&clk IMX8MP_CLK_SAI6>,
-					 <&clk IMX8MP_CLK_SAI7>;
+					 <&clk IMX8MP_CLK_SAI7>,
+					 <&clk IMX8MP_CLK_AUDIO_AXI_ROOT>;
 				clock-names = "ahb",
 					      "sai1", "sai2", "sai3",
-					      "sai5", "sai6", "sai7";
+					      "sai5", "sai6", "sai7", "axi";
 				power-domains = <&pgc_audio>;
+				assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>,
+						  <&clk IMX8MP_AUDIO_PLL2>;
+				assigned-clock-rates = <393216000>, <361267200>;
 			};
 		};
 
@@ -1557,6 +1642,12 @@
 					opp-hz = /bits/ 64 <200000000>;
 				};
 
+				/* Nominal drive mode maximum */
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+				};
+
+				/* Overdrive mode maximum */
 				opp-1000000000 {
 					opp-hz = /bits/ 64 <1000000000>;
 				};
@@ -1604,6 +1695,56 @@
 				};
 			};
 
+			isp_0: isp@32e10000 {
+				compatible = "fsl,imx8mp-isp";
+				reg = <0x32e10000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>;
+				clock-names = "isp", "aclk", "hclk", "pclk";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>,
+						<&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
+				power-domain-names = "isp", "csi2";
+				fsl,blk-ctrl = <&media_blk_ctrl 0>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+			};
+
+			isp_1: isp@32e20000 {
+				compatible = "fsl,imx8mp-isp";
+				reg = <0x32e20000 0x10000>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>;
+				clock-names = "isp", "aclk", "hclk", "pclk";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>,
+						<&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
+				power-domain-names = "isp", "csi2";
+				fsl,blk-ctrl = <&media_blk_ctrl 1>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+			};
+
 			dewarp: dwe@32e30000 {
 				compatible = "nxp,imx8mp-dw100";
 				reg = <0x32e30000 0x10000>;
@@ -1618,15 +1759,16 @@
 				compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2";
 				reg = <0x32e40000 0x10000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <500000000>;
+				clock-frequency = <250000000>;
 				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
 				clock-names = "pclk", "wrap", "phy", "axi";
-				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>;
-				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
-				assigned-clock-rates = <500000000>;
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
+							 <&clk IMX8MP_CLK_24M>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
 				status = "disabled";
 
@@ -1652,15 +1794,16 @@
 				compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2";
 				reg = <0x32e50000 0x10000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency = <266000000>;
+				clock-frequency = <250000000>;
 				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
 				clock-names = "pclk", "wrap", "phy", "axi";
-				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>;
-				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
-				assigned-clock-rates = <266000000>;
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
+							 <&clk IMX8MP_CLK_24M>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
 				status = "disabled";
 
@@ -1709,6 +1852,13 @@
 							remote-endpoint = <&lcdif1_to_dsim>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_dsi_out: endpoint {
+						};
+					};
 				};
 			};
 
@@ -1791,24 +1941,33 @@
 				clock-names = "apb", "axi", "cam1", "cam2",
 					      "disp1", "disp2", "isp", "phy";
 
+				/*
+				 * The ISP maximum frequency is 400MHz in normal mode
+				 * and 500MHz in overdrive mode. The 400MHz operating
+				 * point hasn't been successfully tested yet, so set
+				 * IMX8MP_CLK_MEDIA_ISP to 500MHz for the time being.
+				 */
 				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>,
 						  <&clk IMX8MP_CLK_MEDIA_APB>,
 						  <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
 						  <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_ISP>,
 						  <&clk IMX8MP_VIDEO_PLL1>;
 				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
 							 <&clk IMX8MP_SYS_PLL1_800M>,
 							 <&clk IMX8MP_VIDEO_PLL1_OUT>,
-							 <&clk IMX8MP_VIDEO_PLL1_OUT>;
+							 <&clk IMX8MP_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MP_SYS_PLL2_500M>;
 				assigned-clock-rates = <500000000>, <200000000>,
-						       <0>, <0>, <1039500000>;
+						       <0>, <0>, <500000000>,
+						       <1039500000>;
 				#power-domain-cells = <1>;
 
 				lvds_bridge: bridge@5c {
 					compatible = "fsl,imx8mp-ldb";
 					reg = <0x5c 0x4>, <0x128 0x4>;
 					reg-names = "ldb", "lvds";
-					clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+					clocks = <&clk IMX8MP_CLK_MEDIA_LDB_ROOT>;
 					clock-names = "ldb";
 					assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
 					assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
@@ -1873,9 +2032,143 @@
 				#power-domain-cells = <1>;
 				#clock-cells = <0>;
 			};
+
+			hdmi_blk_ctrl: blk-ctrl@32fc0000 {
+				compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon";
+				reg = <0x32fc0000 0x1000>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_ROOT>,
+					 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+					 <&clk IMX8MP_CLK_HDMI_24M>,
+					 <&clk IMX8MP_CLK_HDMI_FDCC_TST>;
+				clock-names = "apb", "axi", "ref_266m", "ref_24m", "fdcc";
+				power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmi_phy>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>;
+				power-domain-names = "bus", "irqsteer", "lcdif",
+						     "pai", "pvi", "trng",
+						     "hdmi-tx", "hdmi-tx-phy",
+						     "hdcp", "hrv";
+				interconnects = <&noc IMX8MP_ICM_HRV &noc IMX8MP_ICN_HDMI>,
+						<&noc IMX8MP_ICM_LCDIF_HDMI &noc IMX8MP_ICN_HDMI>,
+						<&noc IMX8MP_ICM_HDCP &noc IMX8MP_ICN_HDMI>;
+				interconnect-names = "hrv", "lcdif-hdmi", "hdcp";
+				#power-domain-cells = <1>;
+			};
+
+			irqsteer_hdmi: interrupt-controller@32fc2000 {
+				compatible = "fsl,imx8mp-irqsteer", "fsl,imx-irqsteer";
+				reg = <0x32fc2000 0x1000>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				fsl,channel = <1>;
+				fsl,num-irqs = <64>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>;
+				clock-names = "ipg";
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>;
+			};
+
+			hdmi_pvi: display-bridge@32fc4000 {
+				compatible = "fsl,imx8mp-hdmi-pvi";
+				reg = <0x32fc4000 0x1000>;
+				interrupt-parent = <&irqsteer_hdmi>;
+				interrupts = <12>;
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						pvi_from_lcdif3: endpoint {
+							remote-endpoint = <&lcdif3_to_pvi>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						pvi_to_hdmi_tx: endpoint {
+							remote-endpoint = <&hdmi_tx_from_pvi>;
+						};
+					};
+				};
+			};
+
+			lcdif3: display-controller@32fc6000 {
+				compatible = "fsl,imx8mp-lcdif";
+				reg = <0x32fc6000 0x1000>;
+				interrupt-parent = <&irqsteer_hdmi>;
+				interrupts = <8>;
+				clocks = <&hdmi_tx_phy>,
+					 <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>;
+				status = "disabled";
+
+				port {
+					lcdif3_to_pvi: endpoint {
+						remote-endpoint = <&pvi_from_lcdif3>;
+					};
+				};
+			};
+
+			hdmi_tx: hdmi@32fd8000 {
+				compatible = "fsl,imx8mp-hdmi-tx";
+				reg = <0x32fd8000 0x7eff>;
+				interrupt-parent = <&irqsteer_hdmi>;
+				interrupts = <0>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+					 <&clk IMX8MP_CLK_32K>,
+					 <&hdmi_tx_phy>;
+				clock-names = "iahb", "isfr", "cec", "pix";
+				assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>;
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+				reg-io-width = <1>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						hdmi_tx_from_pvi: endpoint {
+							remote-endpoint = <&pvi_to_hdmi_tx>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						/* Point endpoint to the HDMI connector */
+					};
+				};
+			};
+
+			hdmi_tx_phy: phy@32fdff00 {
+				compatible = "fsl,imx8mp-hdmi-phy";
+				reg = <0x32fdff00 0x100>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_24M>;
+				clock-names = "apb", "ref";
+				assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>;
+				assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
 		};
 
-		pcie: pcie@33800000 {
+		pcie0: pcie: pcie@33800000 {
 			compatible = "fsl,imx8mp-pcie";
 			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
 			reg-names = "dbi", "config";
@@ -1913,10 +2206,13 @@
 			status = "disabled";
 		};
 
-		pcie_ep: pcie-ep@33800000 {
+		pcie0_ep: pcie_ep: pcie-ep@33800000 {
 			compatible = "fsl,imx8mp-pcie-ep";
-			reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>;
-			reg-names = "dbi", "addr_space";
+			reg = <0x33800000 0x100000>,
+			      <0x18000000 0x8000000>,
+			      <0x33900000 0x100000>,
+			      <0x33b00000 0x100000>;
+			reg-names = "dbi", "addr_space", "dbi2", "atu";
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
 				 <&clk IMX8MP_CLK_HSIO_AXI>,
 				 <&clk IMX8MP_CLK_PCIE_ROOT>;
@@ -1948,11 +2244,12 @@
 				 <&clk IMX8MP_CLK_GPU_ROOT>,
 				 <&clk IMX8MP_CLK_GPU_AHB>;
 			clock-names = "core", "shader", "bus", "reg";
+			#cooling-cells = <2>;
 			assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>,
 					  <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>;
-			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
-						 <&clk IMX8MP_SYS_PLL1_800M>;
-			assigned-clock-rates = <800000000>, <800000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+						 <&clk IMX8MP_SYS_PLL2_1000M>;
+			assigned-clock-rates = <1000000000>, <1000000000>;
 			power-domains = <&pgc_gpu3d>;
 		};
 
@@ -1964,9 +2261,10 @@
 				 <&clk IMX8MP_CLK_GPU_ROOT>,
 				 <&clk IMX8MP_CLK_GPU_AHB>;
 			clock-names = "core", "bus", "reg";
+			#cooling-cells = <2>;
 			assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>;
-			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
-			assigned-clock-rates = <800000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+			assigned-clock-rates = <1000000000>;
 			power-domains = <&pgc_gpu2d>;
 		};
 
@@ -1976,8 +2274,8 @@
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
 			assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
-			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
-			assigned-clock-rates = <600000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+			assigned-clock-rates = <800000000>;
 			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>;
 		};
 
@@ -1986,9 +2284,9 @@
 			reg = <0x38310000 0x10000>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
-			assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
-			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
-			assigned-clock-rates = <500000000>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>, <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-rates = <700000000>, <700000000>;
 			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>;
 		};
 
@@ -2003,19 +2301,33 @@
 				 <&clk IMX8MP_CLK_VPU_G2_ROOT>,
 				 <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
 			clock-names = "g1", "g2", "vc8000e";
-			assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>;
-			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
-			assigned-clock-rates = <600000000>, <600000000>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+			assigned-clock-rates = <800000000>;
 			interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>,
 					<&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>,
 					<&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
 			interconnect-names = "g1", "g2", "vc8000e";
 		};
 
+		npu: npu@38500000 {
+			compatible = "vivante,gc";
+			reg = <0x38500000 0x200000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_ML_AXI>,
+				 <&clk IMX8MP_CLK_ML_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			#cooling-cells = <2>;
+			power-domains = <&pgc_mlmix>;
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
 			      <0x38880000 0xc0000>;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -2120,13 +2432,19 @@
 		};
 
 		dsp: dsp@3b6e8000 {
-			compatible = "fsl,imx8mp-dsp";
+			compatible = "fsl,imx8mp-hifi4";
 			reg = <0x3b6e8000 0x88000>;
-			mbox-names = "txdb0", "txdb1",
-				"rxdb0", "rxdb1";
-			mboxes = <&mu2 2 0>, <&mu2 2 1>,
-				<&mu2 3 0>, <&mu2 3 1>;
-			memory-region = <&dsp_reserved>;
+			clocks = <&audio_blk_ctrl  IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT>;
+			clock-names = "ipg", "ocram", "core", "debug";
+			power-domains = <&pgc_audio>;
+			mbox-names = "tx", "rx", "rxdb";
+			mboxes = <&mu2 0 0>, <&mu2 1 0>, <&mu2 3 0>;
+			firmware-name = "imx/dsp/hifi4.bin";
+			resets = <&audio_blk_ctrl IMX8MP_AUDIOMIX_DSP_RUNSTALL>;
+			reset-names = "runstall";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 7507548cdb16..a88bc9034663 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -108,6 +108,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&cpudai>;
 		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,widgets =
 			"Line", "Left Line Out Jack",
 			"Line", "Right Line Out Jack";
@@ -117,27 +118,41 @@
 
 		cpudai: simple-audio-card,cpu {
 			sound-dai = <&sai2>;
+			system-clock-direction-out;
 		};
 
 		link_codec: simple-audio-card,codec {
 			sound-dai = <&wm8524>;
-			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
 		};
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
-		spdif-controller = <&spdif1>;
-		spdif-out;
-		spdif-in;
+		audio-cpu = <&spdif1>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
+	};
+
+	hdmi_arc_in: hdmi-arc-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
 	};
 
 	sound-hdmi-arc {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-hdmi-arc";
-		spdif-controller = <&spdif2>;
-		spdif-in;
+		audio-cpu = <&spdif2>;
+		audio-codec = <&hdmi_arc_in>;
 	};
 };
 
@@ -363,6 +378,16 @@
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+	status = "disabled";
+};
+
 &pcie1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie1>;
@@ -376,6 +401,16 @@
 	status = "okay";
 };
 
+&pcie1_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie1>;
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	status = "disabled";
+};
+
 &pgc_gpu {
 	power-supply = <&sw1a_reg>;
 };
@@ -406,6 +441,11 @@
 	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
 	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <0>, <24576000>;
+	clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_SAI2_ROOT>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_AUDIO_PLL1_OUT>,
+		<&clk IMX8MQ_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
index 366693f31992..e92b5d5a66b5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
@@ -42,7 +42,7 @@
 	status = "okay";
 
 	typec_ptn5100: usb-typec@50 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		reg = <0x50>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
index 6376417e918c..d8cf1f27c3ec 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -65,7 +65,7 @@
 	status = "okay";
 
 	tpm@0 {
-		compatible = "infineon,slb9670";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <43000000>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 8055a2c23035..d9f203c79519 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -172,7 +172,7 @@
 			"Headphones", "HP_OUT",
 			"Builtin Speaker", "Speaker Amp OUTR",
 			"Speaker Amp INR", "LINE_OUT";
-		simple-audio-card,hp-det-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,hp-det-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 
 		simple-audio-card,cpu {
 			sound-dai = <&sai2>;
@@ -429,7 +429,7 @@
 	};
 
 	typec_ptn5100: usb-typec@52 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		reg = <0x52>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec>;
@@ -979,24 +979,27 @@
 };
 
 &usb_dwc3_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	dr_mode = "otg";
 	status = "okay";
 
-	port@0 {
-		reg = <0>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		typec_hs: endpoint {
-			remote-endpoint = <&usb_con_hs>;
+		port@0 {
+			reg = <0>;
+
+			typec_hs: endpoint {
+				remote-endpoint = <&usb_con_hs>;
+			};
 		};
-	};
 
-	port@1 {
-		reg = <1>;
+		port@1 {
+			reg = <1>;
 
-		typec_ss: endpoint {
-			remote-endpoint = <&usb_con_ss>;
+			typec_ss: endpoint {
+				remote-endpoint = <&usb_con_ss>;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index ffb5fe61630d..9e0e2d7271ef 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -45,7 +45,6 @@
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <50>;
-			wakeup-source;
 		};
 
 		key-vol-up {
@@ -53,7 +52,6 @@
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <50>;
-			wakeup-source;
 		};
 	};
 
@@ -243,7 +241,7 @@
 			"Headset Mic", "MICBIAS",
 			"IN3R", "Headset Mic",
 			"DMICDAT", "Digital Mic";
-		simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,hp-det-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
 
 		simple-audio-card,cpu {
 			sound-dai = <&sai2>;
@@ -796,7 +794,6 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "irq";
-		extcon = <&usb3_phy0>;
 		wakeup-source;
 
 		connector {
@@ -1324,25 +1321,28 @@
 };
 
 &usb_dwc3_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	dr_mode = "otg";
 	usb-role-switch;
 	status = "okay";
 
-	port@0 {
-		reg = <0>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		typec_hs: endpoint {
-			remote-endpoint = <&usb_con_hs>;
+		port@0 {
+			reg = <0>;
+
+			typec_hs: endpoint {
+				remote-endpoint = <&usb_con_hs>;
+			};
 		};
-	};
 
-	port@1 {
-		reg = <1>;
+		port@1 {
+			reg = <1>;
 
-		typec_ss: endpoint {
-			remote-endpoint = <&usb_con_ss>;
+			typec_ss: endpoint {
+				remote-endpoint = <&usb_con_ss>;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index a3b9d615a3b4..e34045d10a12 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -39,7 +39,7 @@
 
 	fan: gpio-fan {
 		compatible = "gpio-fan";
-		gpio-fan,speed-map = <0 0 8600 1>;
+		gpio-fan,speed-map = <0 0>, <8600 1>;
 		gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
 		#cooling-cells = <2>;
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
index 0d8def2766f5..0165f3a25985 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx";
 	compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
@@ -27,18 +28,6 @@
 		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 	};
 
-	pcie0_refclk: pcie0-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
-	pcie1_refclk: pcie1-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
 	reg_otg_vbus: regulator-otg-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -102,23 +91,24 @@
 	gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
 };
 
+/* PCIe slot on X36 */
 &pcie0 {
 	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
-		 <&pcie0_refclk>,
-		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&pcieclk 3>,
+		 <&pcieclk 2>,
 		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
 	status = "okay";
 };
 
 /*
- * miniPCIe, also usable for cards with USB. Therefore configure the reset as
+ * miniPCIe on X28, also usable for cards with USB. Therefore configure the reset as
  * static gpio hog.
  */
 &pcie1 {
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-		 <&pcie1_refclk>,
-		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&pcieclk 1>,
+		 <&pcieclk 0>,
 		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	status = "okay";
 };
@@ -170,6 +160,7 @@
 };
 
 &usb3_phy1 {
+	vbus-supply = <&reg_hub_vbus>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
index 5ca6b2252546..c92001c80f11 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
@@ -251,11 +251,16 @@
 	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <84000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&nvcc_1v8_reg>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 0c960efd9b3d..c7bbba45f368 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -517,8 +517,6 @@
 		eeprom@a4 {
 			compatible = "zii,rave-sp-eeprom";
 			reg = <0xa4 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
 			zii,eeprom-name = "main-eeprom";
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index c6dc3ba0d43b..607962f807be 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -106,7 +106,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -126,7 +125,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -144,7 +142,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -162,7 +159,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -1290,6 +1286,13 @@
 							remote-endpoint = <&lcdif_mipi_dsi>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_dsi_out: endpoint {
+						};
+					};
 				};
 			};
 
@@ -1767,6 +1770,41 @@
 			status = "disabled";
 		};
 
+		pcie0_ep: pcie-ep@33800000 {
+			compatible = "fsl,imx8mq-pcie-ep";
+			reg = <0x33800000 0x100000>,
+			      <0x18000000 0x8000000>,
+			      <0x33900000 0x100000>,
+			      <0x33b00000 0x100000>;
+			reg-names = "dbi", "addr_space", "dbi2", "atu";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			linux,pci-domain = <0>;
+			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+					  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+					  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+						 <&clk IMX8MQ_SYS2_PLL_100M>,
+						 <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+					       <10000000>;
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			fsl,max-link-speed = <2>;
+			status = "disabled";
+		};
+
 		pcie1: pcie@33c00000 {
 			compatible = "fsl,imx8mq-pcie";
 			reg = <0x33c00000 0x400000>,
@@ -1812,13 +1850,16 @@
 
 		pcie1_ep: pcie-ep@33c00000 {
 			compatible = "fsl,imx8mq-pcie-ep";
-			reg = <0x33c00000 0x000400000>,
-			      <0x20000000 0x08000000>;
-			reg-names = "dbi", "addr_space";
+			reg = <0x33c00000 0x100000>,
+			      <0x20000000 0x8000000>,
+			      <0x33d00000 0x100000>,
+			      <0x33f00000 0x100000>;
+			reg-names = "dbi", "addr_space", "dbi2", "atu";
 			num-lanes = <1>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "dma";
 			fsl,max-link-speed = <2>;
+			linux,pci-domain = <1>;
 			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
 				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
 				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
@@ -1849,6 +1890,7 @@
 			      <0x31000000 0x2000>,	/* GICC */
 			      <0x31010000 0x2000>,	/* GICV */
 			      <0x31020000 0x2000>;	/* GICH */
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts
new file mode 100644
index 000000000000..8466a8204ed0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis.dtsi"
+#include "imx8-apalis-eval-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board V1.2";
+	compatible = "toradex,apalis-imx8-eval-v1.2",
+		     "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
index 5ab0921eb599..b0ebf6d05450 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "imx8qm-apalis.dtsi"
-#include "imx8-apalis-eval.dtsi"
+#include "imx8-apalis-eval-v1.1.dtsi"
 
 / {
 	model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board";
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts
new file mode 100644
index 000000000000..92c0ae0c0337
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-eval-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board V1.2";
+	compatible = "toradex,apalis-imx8-v1.1-eval-v1.2",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	/delete-property/ no-1-8-v;
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	/delete-property/ no-1-8-v;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
index c8ff75831556..c998e542f93c 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "imx8qm-apalis-v1.1.dtsi"
-#include "imx8-apalis-eval.dtsi"
+#include "imx8-apalis-eval-v1.1.dtsi"
 
 / {
 	model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board";
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
index 81ba8b2831ac..b1c3f331c4ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
@@ -9,8 +9,6 @@
 
 / {
 	model = "Toradex Apalis iMX8QM V1.1";
-	compatible = "toradex,apalis-imx8-v1.1",
-		     "fsl,imx8qm";
 };
 
 /* TODO: Cooling Maps */
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
index 4d6427fbe875..f97feee52c81 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
@@ -7,8 +7,6 @@
 
 / {
 	model = "Toradex Apalis iMX8QM";
-	compatible = "toradex,apalis-imx8",
-		     "fsl,imx8qm";
 };
 
 &ethphy0 {
@@ -24,6 +22,10 @@
 	phy-mode = "rgmii-rxid";
 };
 
+&hsio_refa_clk {
+	enable-gpios = <&lsio_gpio4 27 GPIO_ACTIVE_HIGH>;
+};
+
 /* TODO: Apalis HDMI1 */
 
 /* Apalis I2C2 (DDC) */
@@ -190,12 +192,6 @@
 			  "MXM3_291",
 			  "MXM3_289",
 			  "MXM3_287";
-
-	/* Enable pcie root / sata ref clock unconditionally */
-	pcie-sata-hog {
-		gpios = <27 GPIO_ACTIVE_HIGH>;
-	};
-
 };
 
 &lsio_gpio5 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso
new file mode 100644
index 000000000000..ceb63c28b21a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c_mipi_csi0>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov5640_mipi_0: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&xtal24m>;
+		clock-names = "xclk";
+		pinctrl-0 = <&pinctrl_mipi_csi0>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&lsio_gpio1 27 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_2v8>;
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
+
+		port {
+			ov5640_mipi_0_ep: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi0_in>;
+			};
+		};
+	};
+};
+
+&irqsteer_csi0 {
+	status = "okay";
+};
+
+&isi {
+	status = "okay";
+};
+
+&mipi_csi_0 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_csi0_in: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5640_mipi_0_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso
new file mode 100644
index 000000000000..9e6d33c0315e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c_mipi_csi1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov5640_mipi_1: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&xtal24m>;
+		clock-names = "xclk";
+		pinctrl-0 = <&pinctrl_mipi_csi1>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lsio_gpio1 31 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_2v8>;
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
+
+		port {
+			ov5640_mipi_1_ep: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi1_in>;
+			};
+		};
+	};
+};
+
+&irqsteer_csi1 {
+	status = "okay";
+};
+
+&isi {
+	status = "okay";
+};
+
+&mipi_csi_1 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_csi1_in: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5640_mipi_1_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 6d50838ad17d..202d5c67ac40 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/usb/pd.h>
 #include "imx8qm.dtsi"
 
 / {
@@ -31,14 +32,652 @@
 		reg = <0x00000000 0x80000000 0 0x40000000>;
 	};
 
+	xtal24m: clock-xtal24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal_24MHz";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		vdev0vring0: memory@90000000 {
+			reg = <0 0x90000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: memory@90008000 {
+			reg = <0 0x90008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: memory@90010000 {
+			reg = <0 0x90010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: memory@90018000 {
+			reg = <0 0x90018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table0: memory@900ff000 {
+			reg = <0 0x900ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdev2vring0: memory@90100000 {
+			reg = <0 0x90100000 0 0x8000>;
+			no-map;
+		};
+
+		vdev2vring1: memory@90108000 {
+			reg = <0 0x90108000 0 0x8000>;
+			no-map;
+		};
+
+		vdev3vring0: memory@90110000 {
+			reg = <0 0x90110000 0 0x8000>;
+			no-map;
+		};
+
+		vdev3vring1: memory@90118000 {
+			reg = <0 0x90118000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table1: memory@901ff000 {
+			reg = <0 0x901ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: memory@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+		};
+
+		dsp_reserved: memory@92400000 {
+			reg = <0 0x92400000 0 0x1000000>;
+			no-map;
+		};
+
+		dsp_vdev0vring0: memory@942f0000 {
+			reg = <0 0x942f0000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0vring1: memory@942f8000 {
+			reg = <0 0x942f8000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0buffer: memory@94300000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x94300000 0 0x100000>;
+			no-map;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	lvds_backlight0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&qm_pwm_lvds0 0 100000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <80>;
+	};
+
+	lvds_backlight1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm_lvds1 0 100000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <80>;
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+		mux-gpios = <&lsio_gpio5 3 GPIO_ACTIVE_HIGH>; /* needs to be an unused GPIO */
+		i2c-parent = <&i2c1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8960: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8962: wm8962@1a {
+				compatible = "wlf,wm8962";
+				reg = <0x1a>;
+				clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				AVDD-supply = <&reg_audio_1v8>;
+				CPVDD-supply = <&reg_audio_1v8>;
+				MICVDD-supply = <&reg_audio_3v3>;
+				PLLVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+	};
+
+	mux-controller {
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec_mux>;
+		select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		orientation-switch;
+
+		port {
+			usb3_data_ss: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_2v8: regulator-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
 	reg_usdhc2_vmmc: usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "SD1_SPWR";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
-		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "cs42888_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_fec2_supply: regulator-fec2-nvcc {
+		compatible = "regulator-fixed";
+		regulator-name = "fec2_nvcc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&max7322 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can01_en: regulator-can01-gen {
+		compatible = "regulator-fixed";
+		regulator-name = "can01-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	reg_can2_en: regulator-can2-gen {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can01_stby: regulator-can01-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can01-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can01_en>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can2_en>;
+	};
+
+	reg_pciea: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_pciea_reg>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "mpcie_3v3";
+		gpio = <&lsio_gpio1 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	bt_sco_codec: audio-codec-bt {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai0>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai0>;
+		audio-codec = <&cs42888>;
+		audio-asrc = <&asrc0>;
+		audio-routing = "Line Out Jack", "AOUT1L",
+				"Line Out Jack", "AOUT1R",
+				"Line Out Jack", "AOUT2L",
+				"Line Out Jack", "AOUT2R",
+				"Line Out Jack", "AOUT3L",
+				"Line Out Jack", "AOUT3R",
+				"Line Out Jack", "AOUT4L",
+				"Line Out Jack", "AOUT4R",
+				"AIN1L", "Line In Jack",
+				"AIN1R", "Line In Jack",
+				"AIN2L", "Line In Jack",
+				"AIN2R", "Line In Jack";
+	};
+
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8960>;
+		hp-det-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8962>;
+		hp-det-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HPOUTL",
+				"Headphone Jack", "HPOUTR",
+				"Ext Spk", "SPKOUTL",
+				"Ext Spk", "SPKOUTR",
+				"AMIC", "MICBIAS",
+				"IN1R", "AMIC",
+				"IN3R", "AMIC";
+	};
+
+	imx8qm-cm4-0 {
+		compatible = "fsl,imx8qm-cm4";
+		clocks = <&clk_dummy>;
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu5 0 1
+			  &lsio_mu5 1 1
+			  &lsio_mu5 3 1>;
+		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+				<&vdev1vring0>, <&vdev1vring1>, <&rsc_table0>;
+		power-domains = <&pd IMX_SC_R_M4_0_PID0>, <&pd IMX_SC_R_M4_0_MU_1A>;
+
+		fsl,resource-id = <IMX_SC_R_M4_0_PID0>;
+		fsl,entry-address = <0x34fe0000>;
+	};
+
+	imx8qm-cm4-1 {
+		compatible = "fsl,imx8qm-cm4";
+		clocks = <&clk_dummy>;
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu6 0 1
+			  &lsio_mu6 1 1
+			  &lsio_mu6 3 1>;
+		memory-region = <&vdevbuffer>, <&vdev2vring0>, <&vdev2vring1>,
+				<&vdev3vring0>, <&vdev3vring1>, <&rsc_table1>;
+		power-domains = <&pd IMX_SC_R_M4_1_PID0>, <&pd IMX_SC_R_M4_1_MU_1A>;
+
+		fsl,resource-id = <IMX_SC_R_M4_1_PID0>;
+		fsl,entry-address = <0x38fe0000>;
+	};
+
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0>;
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&amix {
+	status = "okay";
+};
+
+&asrc0 {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
+};
+
+&cm41_i2c {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cm41_i2c>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	cs42888: audio-codec@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "mclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cs42888_reset>;
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+		reset-gpios = <&lsio_gpio4 25 GPIO_ACTIVE_LOW>;
+		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
+	};
+};
+
+&cm41_intmux {
+	status = "okay";
+};
+
+&esai0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai0>;
+	assigned-clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&esai0_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-parents = <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <49152000>, <12288000>, <49152000>;
+	status = "okay";
+};
+
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-pcieb-sata";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lsm303agr-accel";
+		reg = <0x19>;
+	};
+
+	gyrometer@20 {
+		compatible = "nxp,fxas21002c";
+		reg = <0x20>;
+	};
+
+	light-sensor@44 {
+		compatible = "isil,isl29023";
+		reg = <0x44>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+
+	max7322: gpio@68 {
+		compatible = "maxim,max7322";
+		reg = <0x68>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gyrometer@69 {
+		compatible = "st,l3g4200d-gyro";
+		reg = <0x69>;
+	};
+
+	ptn5110: tcpc@51 {
+		compatible = "nxp,ptn5110", "tcpci";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		reg = <0x51>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		usb_con1: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c1_lvds0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0_lpi2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c1_lvds1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds1_lpi2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c0_mipi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mipi0_lpi2c0>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c0_mipi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mipi1_lpi2c0>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can01_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can01_stby>;
+	status = "okay";
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
 };
 
 &lpuart0 {
@@ -59,6 +698,39 @@
 	status = "okay";
 };
 
+&lpspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi2 &pinctrl_lpspi2_cs>;
+	cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lsio_mu5 {
+	status = "okay";
+};
+
+&lsio_mu6 {
+	status = "okay";
+};
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
@@ -83,6 +755,50 @@
 	};
 };
 
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec2_supply>;
+	nvmem-cells = <&fec_mac1>;
+	nvmem-cell-names = "mac-address";
+	rx-internal-delay-ps = <2000>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&pciea {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pciea>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pciea>;
+	status = "okay";
+};
+
+&pcieb {
+	phys = <&hsio_phy 1 PHY_TYPE_PCIE 1>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&qm_pwm_lvds0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_lvds0>;
+	status = "okay";
+};
+
+&pwm_lvds1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_lvds1>;
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -103,7 +819,163 @@
 	status = "okay";
 };
 
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
+&sai0 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai0_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai0>;
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&sai6 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI6_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai6_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&sai7 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI7_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai7_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vpu_dsp {
+	memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+			<&dsp_vdev0vring1>, <&dsp_reserved>;
+	status = "okay";
+};
+
 &iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			IMX8QM_MCLK_OUT0_AUD_ACM_MCLK_OUT0			0x0600004c
+			IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31			0x0600004c
+		>;
+	};
+
+	pinctrl_cs42888_reset: cs42888_resetgrp {
+		fsl,pins = <
+			IMX8QM_QSPI1A_DATA1_LSIO_GPIO4_IO25			0x0600004c
+		>;
+	};
+
+	pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp {
+		fsl,pins = <
+			IMX8QM_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL		0xc2000020
+			IMX8QM_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA		0xc2000020
+		>;
+	};
+
+	pinctrl_i2c_mipi_csi1: i2c-mipi-csi1grp {
+		fsl,pins = <
+			IMX8QM_MIPI_CSI1_I2C0_SCL_MIPI_CSI1_I2C0_SCL		0xc2000020
+			IMX8QM_MIPI_CSI1_I2C0_SDA_MIPI_CSI1_I2C0_SDA		0xc2000020
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL			0x06000021
+			IMX8QM_HDMI_TX0_TS_SDA_DMA_I2C0_SDA			0x06000021
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x0600004c
+			IMX8QM_GPT0_CAPTURE_DMA_I2C1_SDA 0x0600004c
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpio-grp {
+		fsl,pins = <
+			IMX8QM_GPT0_CLK_LSIO_GPIO0_IO14		0xc600004c
+			IMX8QM_GPT0_CAPTURE_LSIO_GPIO0_IO15	0xc600004c
+		>;
+	};
+
+	pinctrl_adc0: adc0grp {
+		fsl,pins = <
+			IMX8QM_ADC_IN0_DMA_ADC0_IN0				0xc0000060
+		>;
+	};
+
+	pinctrl_cm41_i2c: cm41i2cgrp {
+		fsl,pins = <
+			IMX8QM_M41_I2C0_SDA_M41_I2C0_SDA			0x0600004c
+			IMX8QM_M41_I2C0_SCL_M41_I2C0_SCL			0x0600004c
+		>;
+	};
+
+	pinctrl_esai0: esai0grp {
+		fsl,pins = <
+			IMX8QM_ESAI0_FSR_AUD_ESAI0_FSR				0xc6000040
+			IMX8QM_ESAI0_FST_AUD_ESAI0_FST				0xc6000040
+			IMX8QM_ESAI0_SCKR_AUD_ESAI0_SCKR			0xc6000040
+			IMX8QM_ESAI0_SCKT_AUD_ESAI0_SCKT			0xc6000040
+			IMX8QM_ESAI0_TX0_AUD_ESAI0_TX0				0xc6000040
+			IMX8QM_ESAI0_TX1_AUD_ESAI0_TX1				0xc6000040
+			IMX8QM_ESAI0_TX2_RX3_AUD_ESAI0_TX2_RX3			0xc6000040
+			IMX8QM_ESAI0_TX3_RX2_AUD_ESAI0_TX3_RX2			0xc6000040
+			IMX8QM_ESAI0_TX4_RX1_AUD_ESAI0_TX4_RX1			0xc6000040
+			IMX8QM_ESAI0_TX5_RX0_AUD_ESAI0_TX5_RX0			0xc6000040
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020
@@ -123,6 +995,96 @@
 		>;
 	};
 
+	pinctrl_lpspi2: lpspi2grp {
+		fsl,pins = <
+			IMX8QM_SPI2_SCK_DMA_SPI2_SCK		0x06000040
+			IMX8QM_SPI2_SDO_DMA_SPI2_SDO		0x06000040
+			IMX8QM_SPI2_SDI_DMA_SPI2_SDI		0x06000040
+		>;
+	};
+
+	pinctrl_lpspi2_cs: lpspi2csgrp {
+		fsl,pins = <
+			IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10		0x21
+		>;
+	};
+
+	pinctrl_mipi0_lpi2c0: mipi0_lpi2c0grp {
+		fsl,pins = <
+			IMX8QM_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL      0xc6000020
+			IMX8QM_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA      0xc6000020
+			IMX8QM_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO19         0x00000020
+		>;
+	};
+
+	pinctrl_mipi1_lpi2c0: mipi1_lpi2c0grp {
+		fsl,pins = <
+			IMX8QM_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL      0xc6000020
+			IMX8QM_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA      0xc6000020
+			IMX8QM_MIPI_DSI1_GPIO0_01_LSIO_GPIO1_IO23         0x00000020
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8QM_QSPI0A_DATA0_LSIO_QSPI0A_DATA0     0x06000021
+			IMX8QM_QSPI0A_DATA1_LSIO_QSPI0A_DATA1     0x06000021
+			IMX8QM_QSPI0A_DATA2_LSIO_QSPI0A_DATA2     0x06000021
+			IMX8QM_QSPI0A_DATA3_LSIO_QSPI0A_DATA3     0x06000021
+			IMX8QM_QSPI0A_DQS_LSIO_QSPI0A_DQS         0x06000021
+			IMX8QM_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B     0x06000021
+			IMX8QM_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B     0x06000021
+			IMX8QM_QSPI0A_SCLK_LSIO_QSPI0A_SCLK       0x06000021
+			IMX8QM_QSPI0B_SCLK_LSIO_QSPI0B_SCLK       0x06000021
+			IMX8QM_QSPI0B_DATA0_LSIO_QSPI0B_DATA0     0x06000021
+			IMX8QM_QSPI0B_DATA1_LSIO_QSPI0B_DATA1     0x06000021
+			IMX8QM_QSPI0B_DATA2_LSIO_QSPI0B_DATA2     0x06000021
+			IMX8QM_QSPI0B_DATA3_LSIO_QSPI0B_DATA3     0x06000021
+			IMX8QM_QSPI0B_DQS_LSIO_QSPI0B_DQS         0x06000021
+			IMX8QM_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B     0x06000021
+			IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B     0x06000021
+		>;
+	};
+
+	pinctrl_fec2: fec2grp {
+		fsl,pins = <
+			IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD		0x000014a0
+			IMX8QM_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL	0x00000060
+			IMX8QM_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC		0x00000060
+			IMX8QM_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0		0x00000060
+			IMX8QM_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1		0x00000060
+			IMX8QM_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2		0x00000060
+			IMX8QM_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3		0x00000060
+			IMX8QM_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC		0x00000060
+			IMX8QM_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL	0x00000060
+			IMX8QM_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0		0x00000060
+			IMX8QM_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1		0x00000060
+			IMX8QM_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2		0x00000060
+			IMX8QM_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3		0x00000060
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <
+			IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX			0x21
+			IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX			0x21
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <
+			IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX			0x21
+			IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX			0x21
+		>;
+	};
+
+	pinctrl_flexcan3: flexcan3grp {
+		fsl,pins = <
+			IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX			0x21
+			IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX			0x21
+		>;
+	};
+
 	pinctrl_lpuart0: lpuart0grp {
 		fsl,pins = <
 			IMX8QM_UART0_RX_DMA_UART0_RX				0x06000020
@@ -144,6 +1106,101 @@
 		>;
 	};
 
+	pinctrl_lvds0_lpi2c1: lvds0lpi2c1grp {
+		fsl,pins = <
+			IMX8QM_LVDS0_I2C1_SCL_LVDS0_I2C1_SCL	0xc600004c
+			IMX8QM_LVDS0_I2C1_SDA_LVDS0_I2C1_SDA	0xc600004c
+		>;
+	};
+
+	pinctrl_lvds1_lpi2c1: lvds1lpi2c1grp {
+		fsl,pins = <
+			IMX8QM_LVDS1_I2C1_SCL_LVDS1_I2C1_SCL	0xc600004c
+			IMX8QM_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA	0xc600004c
+		>;
+	};
+
+	pinctrl_mipi_csi0: mipi-csi0grp {
+		fsl,pins = <
+			IMX8QM_MIPI_CSI0_GPIO0_00_LSIO_GPIO1_IO27		0xC0000041
+			IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28		0xC0000041
+			IMX8QM_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT	0xC0000041
+		>;
+	};
+
+	pinctrl_mipi_csi1: mipi-csi1grp {
+		fsl,pins = <
+			IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30		0xC0000041
+			IMX8QM_MIPI_CSI1_GPIO0_01_LSIO_GPIO1_IO31		0xC0000041
+			IMX8QM_MIPI_CSI1_MCLK_OUT_MIPI_CSI1_ACM_MCLK_OUT	0xC0000041
+		>;
+	};
+
+	pinctrl_pciea: pcieagrp {
+		fsl,pins = <
+			IMX8QM_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO28		0x04000021
+			IMX8QM_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO29		0x06000021
+			IMX8QM_SCU_GPIO0_07_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x20
+		>;
+	};
+
+	pinctrl_pciea_reg: pcieareggrp {
+		fsl,pins = <
+			IMX8QM_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13			0x06000021
+		>;
+	};
+
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <
+			IMX8QM_PCIE_CTRL1_CLKREQ_B_HSIO_PCIE1_CLKREQ_B		0x06000021
+			IMX8QM_PCIE_CTRL1_WAKE_B_LSIO_GPIO4_IO31		0x04000021
+			IMX8QM_PCIE_CTRL1_PERST_B_LSIO_GPIO5_IO00		0x06000021
+		>;
+	};
+
+	pinctrl_pwm_lvds0: pwmlvds0grp {
+		fsl,pins = <
+			IMX8QM_LVDS0_GPIO00_LVDS0_PWM0_OUT		0x00000020
+		>;
+	};
+
+	pinctrl_pwm_lvds1: pwmlvds1grp {
+		fsl,pins = <
+			IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT		0x00000020
+		>;
+	};
+
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <
+			IMX8QM_SPI0_CS1_AUD_SAI0_TXC				0x0600004c
+			IMX8QM_SPI2_CS1_AUD_SAI0_TXFS				0x0600004c
+			IMX8QM_SAI1_RXFS_AUD_SAI0_RXD				0x0600004c
+			IMX8QM_SAI1_RXC_AUD_SAI0_TXD				0x0600006c
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX8QM_SAI1_RXD_AUD_SAI1_RXD				0x06000040
+			IMX8QM_SAI1_TXFS_AUD_SAI1_TXFS				0x06000040
+			IMX8QM_SAI1_TXD_AUD_SAI1_TXD				0x06000060
+			IMX8QM_SAI1_TXC_AUD_SAI1_TXC				0x06000040
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26		0x00000021
+		>;
+	};
+
+	pinctrl_typec_mux: typecmuxgrp {
+		fsl,pins = <
+			IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19		0x60
+			IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06		0x60
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK				0x06000041
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
new file mode 100644
index 000000000000..c9b55f02497a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+/delete-node/ &acm;
+/delete-node/ &sai4;
+/delete-node/ &sai5;
+/delete-node/ &sai4_lpcg;
+/delete-node/ &sai5_lpcg;
+
+&amix {
+	dais = <&sai6>, <&sai7>;
+};
+
+&asrc0 {
+	clocks = <&asrc0_lpcg IMX_LPCG_CLK_0>,
+		 <&asrc0_lpcg IMX_LPCG_CLK_2>,
+		 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+		 <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+		 <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_ASRC_0>;
+};
+
+&asrc0_lpcg {
+	clocks = <&audio_ipg_clk>,
+		 <&audio_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>;
+	clock-output-names = "asrc0_lpcg_ipg_clk", "asrc0_lpcg_mem_clk";
+};
+
+&asrc1 {
+	clocks = <&asrc1_lpcg IMX_LPCG_CLK_0>,
+		 <&asrc1_lpcg IMX_LPCG_CLK_2>,
+		 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+		 <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+		 <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_ASRC_1>;
+};
+
+&asrc1_lpcg {
+	clocks = <&audio_ipg_clk>, <&audio_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>;
+	clock-output-names = "asrc1_lpcg_ipg_clk", "asrc1_lpcg_mem_clk";
+};
+
+&audio_subsys {
+
+	sai4: sai@59080000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59080000 0x10000>;
+		interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai4_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&sai4_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx";
+		dmas = <&edma0 18 0 1>;
+		fsl,dataline = <0 0xf 0x0>;
+		power-domains = <&pd IMX_SC_R_SAI_4>;
+		status = "disabled";
+	};
+
+	sai5: sai@59090000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59090000 0x10000>;
+		interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai5_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&sai5_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "tx";
+		dmas = <&edma0 19 0 0>;
+		fsl,dataline = <0 0x0 0xf>;
+		power-domains = <&pd IMX_SC_R_SAI_5>;
+		status = "disabled";
+	};
+
+	sai4_lpcg: clock-controller@59480000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59480000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "sai4_lpcg_mclk", "sai4_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_4>;
+		status = "disabled";
+	};
+
+	sai5_lpcg: clock-controller@59490000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59490000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "sai5_lpcg_mclk", "sai5_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_5>;
+		status = "disabled";
+	};
+
+	esai1: esai@59810000 {
+		compatible = "fsl,imx8qm-esai", "fsl,imx6ull-esai";
+		reg = <0x59810000 0x10000>;
+		interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&esai1_lpcg IMX_LPCG_CLK_0>,
+			 <&esai1_lpcg IMX_LPCG_CLK_4>,
+			 <&esai1_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>;
+		clock-names = "core", "extal", "fsys", "spba";
+		dmas = <&edma1 6 0 1>, <&edma1 7 0 0>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd IMX_SC_R_ESAI_1>;
+		status = "disabled";
+	};
+
+	sai6: sai@59820000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59820000 0x10000>;
+		interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai6_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&sai6_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx", "tx";
+		dmas = <&edma1 8 0 1>, <&edma1 9 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_6>;
+		status = "disabled";
+	};
+
+	sai7: sai@59830000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59830000 0x10000>;
+		interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai7_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&sai7_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "tx";
+		dmas = <&edma1 10 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_7>;
+		status = "disabled";
+	};
+
+	esai1_lpcg: clock-controller@59c10000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c10000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_ESAI1_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "esai1_lpcg_extal_clk", "esai1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ESAI_1>;
+	};
+
+	sai6_lpcg: clock-controller@59c20000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI6_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "sai6_lpcg_mclk", "sai6_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_6>;
+	};
+
+	sai7_lpcg: clock-controller@59c30000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI7_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "sai7_lpcg_mclk", "sai7_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_7>;
+	};
+
+	acm: acm@59e00000 {
+		compatible = "fsl,imx8qm-acm";
+		reg = <0x59e00000 0x1d0000>;
+		#clock-cells = <1>;
+		power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+				<&pd IMX_SC_R_AUDIO_CLK_1>,
+				<&pd IMX_SC_R_MCLK_OUT_0>,
+				<&pd IMX_SC_R_MCLK_OUT_1>,
+				<&pd IMX_SC_R_AUDIO_PLL_0>,
+				<&pd IMX_SC_R_AUDIO_PLL_1>,
+				<&pd IMX_SC_R_ASRC_0>,
+				<&pd IMX_SC_R_ASRC_1>,
+				<&pd IMX_SC_R_ESAI_0>,
+				<&pd IMX_SC_R_ESAI_1>,
+				<&pd IMX_SC_R_SAI_0>,
+				<&pd IMX_SC_R_SAI_1>,
+				<&pd IMX_SC_R_SAI_2>,
+				<&pd IMX_SC_R_SAI_3>,
+				<&pd IMX_SC_R_SAI_4>,
+				<&pd IMX_SC_R_SAI_5>,
+				<&pd IMX_SC_R_SAI_6>,
+				<&pd IMX_SC_R_SAI_7>,
+				<&pd IMX_SC_R_SPDIF_0>,
+				<&pd IMX_SC_R_SPDIF_1>,
+				<&pd IMX_SC_R_MQS_0>;
+		clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_mlb_clk>,
+			 <&clk_hdmi_rx_mclk>,
+			 <&clk_ext_aud_mclk0>,
+			 <&clk_ext_aud_mclk1>,
+			 <&clk_esai0_rx_clk>,
+			 <&clk_esai0_rx_hf_clk>,
+			 <&clk_esai0_tx_clk>,
+			 <&clk_esai0_tx_hf_clk>,
+			 <&clk_esai1_rx_clk>,
+			 <&clk_esai1_rx_hf_clk>,
+			 <&clk_esai1_tx_clk>,
+			 <&clk_esai1_tx_hf_clk>,
+			 <&clk_spdif0_rx>,
+			 <&clk_spdif0_rx>,
+			 <&clk_sai0_rx_bclk>,
+			 <&clk_sai0_tx_bclk>,
+			 <&clk_sai1_rx_bclk>,
+			 <&clk_sai1_tx_bclk>,
+			 <&clk_sai2_rx_bclk>,
+			 <&clk_sai3_rx_bclk>,
+			 <&clk_sai4_rx_bclk>,
+			 <&clk_sai5_rx_bclk>,
+			 <&clk_sai6_rx_bclk>;
+		clock-names = "aud_rec_clk0_lpcg_clk",
+			      "aud_rec_clk1_lpcg_clk",
+			      "aud_pll_div_clk0_lpcg_clk",
+			      "aud_pll_div_clk1_lpcg_clk",
+			      "mlb_clk",
+			      "hdmi_rx_mclk",
+			      "ext_aud_mclk0",
+			      "ext_aud_mclk1",
+			      "esai0_rx_clk",
+			      "esai0_rx_hf_clk",
+			      "esai0_tx_clk",
+			      "esai0_tx_hf_clk",
+			      "esai1_rx_clk",
+			      "esai1_rx_hf_clk",
+			      "esai1_tx_clk",
+			      "esai1_tx_hf_clk",
+			      "spdif0_rx",
+			      "spdif1_rx",
+			      "sai0_rx_bclk",
+			      "sai0_tx_bclk",
+			      "sai1_rx_bclk",
+			      "sai1_tx_bclk",
+			      "sai2_rx_bclk",
+			      "sai3_rx_bclk",
+			      "sai4_rx_bclk",
+			      "sai5_tx_bclk",
+			      "sai6_rx_bclk";
+	};
+};
+
+&dsp_lpcg {
+	status = "disabled";
+};
+
+&dsp_ram_lpcg {
+	status = "disabled";
+};
+
+/* edma2 called in imx8qm RM with the same address in edma0 of imx8qxp */
+&edma0 {
+	reg = <0x591f0000 0x150000>;
+	dma-channels = <20>;
+	dma-channel-mask = <0>;
+	interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* asrc0 */
+		     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* esai0 */
+		     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, /* spdif0 */
+		     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, /* spdif1 */
+		     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* sai0 */
+		     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* sai1 */
+		     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, /* sai2 */
+		     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* sai3 */
+		     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */
+		     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */
+	power-domains = <&pd IMX_SC_R_DMA_2_CH0>,
+			<&pd IMX_SC_R_DMA_2_CH1>,
+			<&pd IMX_SC_R_DMA_2_CH2>,
+			<&pd IMX_SC_R_DMA_2_CH3>,
+			<&pd IMX_SC_R_DMA_2_CH4>,
+			<&pd IMX_SC_R_DMA_2_CH5>,
+			<&pd IMX_SC_R_DMA_2_CH6>,
+			<&pd IMX_SC_R_DMA_2_CH7>,
+			<&pd IMX_SC_R_DMA_2_CH8>,
+			<&pd IMX_SC_R_DMA_2_CH9>,
+			<&pd IMX_SC_R_DMA_2_CH10>,
+			<&pd IMX_SC_R_DMA_2_CH11>,
+			<&pd IMX_SC_R_DMA_2_CH12>,
+			<&pd IMX_SC_R_DMA_2_CH13>,
+			<&pd IMX_SC_R_DMA_2_CH14>,
+			<&pd IMX_SC_R_DMA_2_CH15>,
+			<&pd IMX_SC_R_DMA_2_CH16>,
+			<&pd IMX_SC_R_DMA_2_CH17>,
+			<&pd IMX_SC_R_DMA_2_CH18>,
+			<&pd IMX_SC_R_DMA_2_CH19>;
+};
+
+/* edma3 called in imx8qm RM with the same address in edma1 of imx8qxp */
+&edma1 {
+	reg = <0x599f0000 0xc0000>;
+	dma-channels = <11>;
+	dma-channel-mask = <0xc0>;
+	interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* asrc1 */
+		     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* no used */
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* no used */
+		     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai6 */
+		     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai7 */
+	power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+			<&pd IMX_SC_R_DMA_3_CH1>,
+			<&pd IMX_SC_R_DMA_3_CH2>,
+			<&pd IMX_SC_R_DMA_3_CH3>,
+			<&pd IMX_SC_R_DMA_3_CH4>,
+			<&pd IMX_SC_R_DMA_3_CH5>,
+			<&pd IMX_SC_R_DMA_3_CH6>,
+			<&pd IMX_SC_R_DMA_3_CH7>,
+			<&pd IMX_SC_R_DMA_3_CH8>,
+			<&pd IMX_SC_R_DMA_3_CH9>,
+			<&pd IMX_SC_R_DMA_3_CH10>;
+};
+
+&esai0 {
+	clocks = <&esai0_lpcg IMX_LPCG_CLK_0>,
+		 <&esai0_lpcg IMX_LPCG_CLK_4>,
+		 <&esai0_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_ESAI_0>;
+};
+
+&esai0_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "esai0_lpcg_extal_clk", "esai0_lpcg_ipg_clk";
+};
+
+&mqs0_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "mqs0_lpcg_mclk", "mqs0_lpcg_ipg_clk";
+};
+
+&sai0 {
+	clocks = <&sai0_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>,
+		 <&sai0_lpcg IMX_LPCG_CLK_4>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_SAI_0>;
+};
+
+&sai0_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "sai0_lpcg_mclk", "sai0_lpcg_ipg_clk";
+};
+
+&sai1 {
+	clocks = <&sai1_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>,
+		 <&sai1_lpcg IMX_LPCG_CLK_4>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_SAI_1>;
+};
+
+&sai1_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "sai1_lpcg_mclk", "sai1_lpcg_ipg_clk";
+};
+
+&sai2 {
+	clocks = <&sai2_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>,
+		 <&sai2_lpcg IMX_LPCG_CLK_4>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_SAI_2>;
+};
+
+&sai2_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "sai2_lpcg_mclk", "sai2_lpcg_ipg_clk";
+};
+
+&sai3 {
+	clocks = <&sai3_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>,
+		 <&sai3_lpcg IMX_LPCG_CLK_4>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_SAI_3>;
+};
+
+&sai3_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "sai3_lpcg_mclk", "sai3_lpcg_ipg_clk";
+};
+
+&spdif0 {
+	clocks = <&spdif0_lpcg IMX_LPCG_CLK_4>,	/* core */
+		 <&clk_dummy>,			/* rxtx0 */
+		 <&spdif0_lpcg IMX_LPCG_CLK_5>,	/* rxtx1 */
+		 <&clk_dummy>,			/* rxtx2 */
+		 <&clk_dummy>,			/* rxtx3 */
+		 <&clk_dummy>,			/* rxtx4 */
+		 <&audio_ipg_clk>,		/* rxtx5 */
+		 <&clk_dummy>,			/* rxtx6 */
+		 <&clk_dummy>,			/* rxtx7 */
+		 <&clk_dummy>;			/* spba */
+	power-domains = <&pd IMX_SC_R_SPDIF_0>;
+};
+
+&spdif0_lpcg {
+	clock-indices = <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_4>;
+	clock-output-names = "spdif0_lpcg_tx_clk", "spdif0_lpcg_gclkw";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
index ec1639174e2e..ccf9f510e0f8 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
@@ -4,22 +4,31 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+&usbphy1 {
+	compatible = "fsl,imx8qm-usbphy", "fsl,imx7ulp-usbphy";
+};
+
 &fec1 {
 	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+	iommus = <&smmu 0x12 0x7f80>;
 };
 
 &fec2 {
 	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+	iommus = <&smmu 0x12 0x7f80>;
 };
 
 &usdhc1 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	iommus = <&smmu 0x11 0x7f80>;
 };
 
 &usdhc2 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	iommus = <&smmu 0x11 0x7f80>;
 };
 
 &usdhc3 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	iommus = <&smmu 0x11 0x7f80>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index 8439dd6b3935..d4856b8590e0 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -4,6 +4,9 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+/delete-node/ &adma_pwm;
+/delete-node/ &adma_pwm_lpcg;
+
 &dma_subsys {
 	uart4_lpcg: clock-controller@5a4a0000 {
 		compatible = "fsl,imx8qxp-lpcg";
@@ -17,6 +20,32 @@
 		power-domains = <&pd IMX_SC_R_UART_4>;
 	};
 
+	i2c4: i2c@5a840000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x5a840000 0x4000>;
+		interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&i2c4_lpcg 0>,
+			 <&i2c4_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_I2C_4 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_4>;
+		status = "disabled";
+	};
+
+	i2c4_lpcg: clock-controller@5ac40000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac40000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_I2C_4 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c4_lpcg_clk",
+				     "i2c4_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_4>;
+	};
+
 	can1_lpcg: clock-controller@5ace0000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5ace0000 0x10000>;
@@ -96,15 +125,30 @@
 	status = "okay";
 };
 
+/* It is eDMA1 in 8QM RM, but 8QXP it is eDMA3 */
 &edma3 {
+	reg = <0x5a9f0000 0x210000>;
+	dma-channels = <10>;
+	interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
 	power-domains = <&pd IMX_SC_R_DMA_1_CH0>,
-		     <&pd IMX_SC_R_DMA_1_CH1>,
-		     <&pd IMX_SC_R_DMA_1_CH2>,
-		     <&pd IMX_SC_R_DMA_1_CH3>,
-		     <&pd IMX_SC_R_DMA_1_CH4>,
-		     <&pd IMX_SC_R_DMA_1_CH5>,
-		     <&pd IMX_SC_R_DMA_1_CH6>,
-		     <&pd IMX_SC_R_DMA_1_CH7>;
+			<&pd IMX_SC_R_DMA_1_CH1>,
+			<&pd IMX_SC_R_DMA_1_CH2>,
+			<&pd IMX_SC_R_DMA_1_CH3>,
+			<&pd IMX_SC_R_DMA_1_CH4>,
+			<&pd IMX_SC_R_DMA_1_CH5>,
+			<&pd IMX_SC_R_DMA_1_CH6>,
+			<&pd IMX_SC_R_DMA_1_CH7>,
+			<&pd IMX_SC_R_DMA_1_CH8>,
+			<&pd IMX_SC_R_DMA_1_CH9>;
 };
 
 &flexcan1 {
@@ -112,15 +156,15 @@
 };
 
 &flexcan2 {
-	clocks = <&can1_lpcg 1>,
-		 <&can1_lpcg 0>;
+	clocks = <&can1_lpcg IMX_LPCG_CLK_4>,
+		 <&can1_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };
 
 &flexcan3 {
-	clocks = <&can2_lpcg 1>,
-		 <&can2_lpcg 0>;
+	clocks = <&can2_lpcg IMX_LPCG_CLK_4>,
+		 <&can2_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };
@@ -128,21 +172,25 @@
 &lpuart0 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart1 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart2 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 17 0 0>, <&edma2 16 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart3 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 19 0 0>, <&edma2 18 0 1>;
+	dma-names = "rx","tx";
 };
 
 &i2c0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
new file mode 100644
index 000000000000..bd6e0aa27efe
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *	Richard Zhu <hongxing.zhu@nxp.com>
+ */
+
+&hsio_subsys {
+	compatible = "simple-bus";
+	ranges = <0x5f000000 0x0 0x5f000000 0x01000000>,
+		 <0x40000000 0x0 0x60000000 0x10000000>,
+		 <0x80000000 0x0 0x70000000 0x10000000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	pcie0: pciea: pcie@5f000000 {
+		compatible = "fsl,imx8q-pcie";
+		reg = <0x5f000000 0x10000>,
+		      <0x4ff00000 0x80000>;
+		reg-names = "dbi", "config";
+		ranges = <0x81000000 0 0x00000000 0x4ff80000 0 0x00010000>,
+			 <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>;
+		#interrupt-cells = <1>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		clocks = <&pciea_lpcg IMX_LPCG_CLK_6>,
+			 <&pciea_lpcg IMX_LPCG_CLK_4>,
+			 <&pciea_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "dbi", "mstr", "slv";
+		bus-range = <0x00 0xff>;
+		device_type = "pci";
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		num-lanes = <1>;
+		num-viewport = <4>;
+		power-domains = <&pd IMX_SC_R_PCIE_A>;
+		fsl,max-link-speed = <3>;
+		status = "disabled";
+	};
+
+	pcie0_ep: pciea_ep: pcie-ep@5f000000 {
+		compatible = "fsl,imx8q-pcie-ep";
+		reg = <0x5f000000 0x00010000>,
+		      <0x40000000 0x10000000>;
+		reg-names = "dbi", "addr_space";
+		num-lanes = <1>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "dma";
+		clocks = <&pciea_lpcg IMX_LPCG_CLK_6>,
+			 <&pciea_lpcg IMX_LPCG_CLK_4>,
+			 <&pciea_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "dbi", "mstr", "slv";
+		power-domains = <&pd IMX_SC_R_PCIE_A>;
+		fsl,max-link-speed = <3>;
+		num-ib-windows = <6>;
+		num-ob-windows = <6>;
+		status = "disabled";
+	};
+
+	pcie1: pcieb: pcie@5f010000 {
+		compatible = "fsl,imx8q-pcie";
+		reg = <0x5f010000 0x10000>,
+		      <0x8ff00000 0x80000>;
+		reg-names = "dbi", "config";
+		ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
+			 <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
+		#interrupt-cells = <1>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi", "dma";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		clocks = <&pcieb_lpcg IMX_LPCG_CLK_6>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_4>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "dbi", "mstr", "slv";
+		bus-range = <0x00 0xff>;
+		device_type = "pci";
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		num-lanes = <1>;
+		num-viewport = <4>;
+		power-domains = <&pd IMX_SC_R_PCIE_B>;
+		fsl,max-link-speed = <3>;
+		status = "disabled";
+	};
+
+	sata: sata@5f020000 {
+		compatible = "fsl,imx8qm-ahci";
+		reg = <0x5f020000 0x10000>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sata_lpcg IMX_LPCG_CLK_4>,
+			 <&sata_crr4_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "sata", "sata_ref";
+		phy-names = "sata-phy", "cali-phy0", "cali-phy1";
+		power-domains = <&pd IMX_SC_R_SATA_0>;
+		/*
+		 * Since "REXT" pin is only present for first lane PHY
+		 * and its calibration result will be stored, and shared
+		 * by the PHY used by SATA.
+		 *
+		 * Add the calibration PHYs for SATA here, although only
+		 * the third lane PHY is used by SATA.
+		 */
+		phys = <&hsio_phy 2 PHY_TYPE_SATA 0>,
+		       <&hsio_phy 0 PHY_TYPE_PCIE 0>,
+		       <&hsio_phy 1 PHY_TYPE_PCIE 1>;
+		status = "disabled";
+	};
+
+	pciea_lpcg: clock-controller@5f050000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f050000 0x10000>;
+		clocks = <&hsio_axi_clk>, <&hsio_axi_clk>, <&hsio_axi_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>;
+		clock-output-names = "hsio_pciea_mstr_axi_clk",
+				     "hsio_pciea_slv_axi_clk",
+				     "hsio_pciea_dbi_axi_clk";
+		power-domains = <&pd IMX_SC_R_PCIE_A>;
+	};
+
+	sata_lpcg: clock-controller@5f070000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f070000 0x10000>;
+		clocks = <&hsio_axi_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_sata_clk";
+		power-domains = <&pd IMX_SC_R_SATA_0>;
+	};
+
+	phyx2_lpcg: clock-controller@5f080000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f080000 0x10000>;
+		clocks = <&hsio_refa_clk>, <&hsio_per_clk>,
+			 <&hsio_refa_clk>, <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "hsio_phyx2_pclk_0",
+				     "hsio_phyx2_pclk_1",
+				     "hsio_phyx2_apbclk_0",
+				     "hsio_phyx2_apbclk_1";
+		power-domains = <&pd IMX_SC_R_SERDES_0>;
+	};
+
+	phyx1_lpcg: clock-controller@5f090000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f090000 0x10000>;
+		clocks = <&hsio_refa_clk>, <&hsio_per_clk>,
+			 <&hsio_per_clk>, <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_phyx1_pclk",
+				     "hsio_phyx1_epcs_tx_clk",
+				     "hsio_phyx1_epcs_rx_clk",
+				     "hsio_phyx1_apb_clk";
+		power-domains = <&pd IMX_SC_R_SERDES_1>;
+	};
+
+	phyx2_crr0_lpcg: clock-controller@5f0a0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f0a0000 0x10000>;
+		clocks = <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_phyx2_per_clk";
+		power-domains = <&pd IMX_SC_R_SERDES_0>;
+	};
+
+	pciea_crr2_lpcg: clock-controller@5f0c0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f0c0000 0x10000>;
+		clocks = <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_pciea_per_clk";
+		power-domains = <&pd IMX_SC_R_PCIE_A>;
+	};
+
+	sata_crr4_lpcg: clock-controller@5f0e0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f0e0000 0x10000>;
+		clocks = <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_sata_per_clk";
+		power-domains = <&pd IMX_SC_R_SATA_0>;
+	};
+
+	hsio_phy: phy@5f180000 {
+		compatible = "fsl,imx8qm-hsio";
+		reg = <0x5f180000 0x30000>,
+		      <0x5f110000 0x20000>,
+		      <0x5f130000 0x30000>,
+		      <0x5f160000 0x10000>;
+		reg-names = "reg", "phy", "ctrl", "misc";
+		clocks = <&phyx2_lpcg IMX_LPCG_CLK_0>,
+			 <&phyx2_lpcg IMX_LPCG_CLK_1>,
+			 <&phyx2_lpcg IMX_LPCG_CLK_4>,
+			 <&phyx2_lpcg IMX_LPCG_CLK_5>,
+			 <&phyx1_lpcg IMX_LPCG_CLK_0>,
+			 <&phyx1_lpcg IMX_LPCG_CLK_1>,
+			 <&phyx1_lpcg IMX_LPCG_CLK_2>,
+			 <&phyx1_lpcg IMX_LPCG_CLK_4>,
+			 <&phyx2_crr0_lpcg IMX_LPCG_CLK_4>,
+			 <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
+			 <&pciea_crr2_lpcg IMX_LPCG_CLK_4>,
+			 <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
+			 <&sata_crr4_lpcg IMX_LPCG_CLK_4>,
+			 <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "pclk0", "pclk1", "apb_pclk0", "apb_pclk1",
+			      "pclk2", "epcs_tx", "epcs_rx", "apb_pclk2",
+			      "phy0_crr", "phy1_crr", "ctl0_crr",
+			      "ctl1_crr", "ctl2_crr", "misc_crr";
+		#phy-cells = <3>;
+		power-domains = <&pd IMX_SC_R_SERDES_0>, <&pd IMX_SC_R_SERDES_1>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
index 2bbdacb1313f..4b7e685daa02 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
@@ -3,6 +3,31 @@
  * Copyright 2021 NXP
  */
 
+&isi {
+	compatible = "fsl,imx8qm-isi";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@2 {
+			reg = <2>;
+
+			isi_in_2: endpoint {
+				remote-endpoint = <&mipi_csi0_out>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			isi_in_3: endpoint {
+				remote-endpoint = <&mipi_csi1_out>;
+			};
+		};
+	};
+};
+
 &jpegdec {
 	compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec";
 };
@@ -10,3 +35,57 @@
 &jpegenc {
 	compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
 };
+
+&mipi_csi_0 {
+	compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			mipi_csi0_out: endpoint {
+				remote-endpoint = <&isi_in_2>;
+			};
+		};
+	};
+};
+
+&mipi_csi_1 {
+	compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			mipi_csi1_out: endpoint {
+				remote-endpoint = <&isi_in_3>;
+			};
+		};
+	};
+};
+
+&pi0_ipg_lpcg {
+	status = "disabled";
+};
+
+&pi0_misc_lpcg {
+	status = "disabled";
+};
+
+&pi0_pxl_lpcg {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi
new file mode 100644
index 000000000000..0514d8b2af75
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright 2024 NXP
+ */
+
+&qm_lvds0_lis_lpcg {
+	clocks = <&lvds_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_4>;
+};
+
+&qm_lvds0_pwm_lpcg {
+	clocks = <&clk IMX_SC_R_LVDS_0_PWM_0 IMX_SC_PM_CLK_PER>,
+		 <&lvds_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+};
+
+&qm_lvds0_i2c0_lpcg {
+	clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>,
+		 <&lvds_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+};
+
+&qm_pwm_lvds0 {
+	clocks = <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_4>,
+		 <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_0>;
+};
+
+&qm_i2c0_lvds0 {
+	clocks = <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_0>,
+		 <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_4>;
+};
+
+&lvds0_subsys {
+	interrupt-parent = <&irqsteer_lvds0>;
+
+	irqsteer_lvds0: interrupt-controller@56240000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x56240000 0x1000>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		clocks = <&qm_lvds0_lis_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	lvds0_i2c1_lpcg: clock-controller@56243014 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56243014 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds0_i2c1_lpcg_clk",
+				     "lvds0_i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>;
+	};
+
+	i2c1_lvds0: i2c@56247000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x56247000 0x1000>;
+		interrupts = <9>;
+		clocks = <&lvds0_i2c1_lpcg IMX_LPCG_CLK_0>,
+			 <&lvds0_i2c1_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi
new file mode 100644
index 000000000000..f4c393fe7204
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright 2024 NXP
+ */
+
+&mipi0_lis_lpcg {
+	clocks = <&dsi_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>;
+	clock-output-names = "mipi0_lis_lpcg_ipg_clk";
+};
+
+&mipi0_pwm_lpcg {
+	clocks = <&clk IMX_SC_R_MIPI_0_PWM_0 IMX_SC_PM_CLK_PER>,
+		 <&dsi_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+	clock-output-names = "mipi0_pwm_lpcg_clk",
+			     "mipi0_pwm_lpcg_ipg_clk";
+};
+\ No newline at end of file
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 31744fc1ab08..5206ca82eaf6 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -24,6 +24,10 @@
 		serial1 = &lpuart1;
 		serial2 = &lpuart2;
 		serial3 = &lpuart3;
+		spi0 = &lpspi0;
+		spi1 = &lpspi1;
+		spi2 = &lpspi2;
+		spi3 = &lpspi3;
 		vpu-core0 = &vpu_core0;
 		vpu-core1 = &vpu_core1;
 		vpu-core2 = &vpu_core2;
@@ -241,6 +245,7 @@
 		      <0x0 0x52000000 0 0x2000>,  /* GICC */
 		      <0x0 0x52010000 0 0x1000>,  /* GICH */
 		      <0x0 0x52020000 0 0x20000>; /* GICV */
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -265,6 +270,47 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
 	};
 
+	smmu: iommu@51400000 {
+		compatible = "arm,mmu-500";
+		interrupt-parent = <&gic>;
+		reg = <0 0x51400000 0 0x40000>;
+		#global-interrupts = <1>;
+		#iommu-cells = <2>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	system-controller {
 		compatible = "fsl,imx-scu";
 		mbox-names = "tx0",
@@ -288,14 +334,39 @@
 			compatible = "fsl,imx8qm-iomuxc";
 		};
 
+		scu_reset: reset-controller {
+			compatible = "fsl,imx-scu-reset";
+			#reset-cells = <1>;
+		};
+
 		rtc: rtc {
 			compatible = "fsl,imx8qxp-sc-rtc";
 		};
 
+		ocotp: ocotp {
+			compatible = "fsl,imx8qm-scu-ocotp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			read-only;
+
+			fec_mac0: mac@1c4 {
+				reg = <0x1c4 6>;
+			};
+
+			fec_mac1: mac@1c6 {
+				reg = <0x1c6 6>;
+			};
+		};
+
 		tsens: thermal-sensor {
 			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
 			#thermal-sensor-cells = <1>;
 		};
+
+		watchdog {
+			compatible = "fsl,imx8qm-sc-wdt", "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
 	};
 
 	thermal-zones {
@@ -420,15 +491,161 @@
 		};
 	};
 
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
+
+	clk_esai1_rx_clk: clock-esai1-rx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "esai1_rx_clk";
+	};
+
+	clk_esai1_rx_hf_clk: clock-esai1-rx-hf {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "esai1_rx_hf_clk";
+	};
+
+	clk_esai1_tx_clk: clock-esai1-tx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "esai1_tx_clk";
+	};
+
+	clk_esai1_tx_hf_clk: clock-esai1-tx-hf {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "esai1_tx_hf_clk";
+	};
+
+	clk_hdmi_rx_mclk: clock-hdmi-rx-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "hdmi-rx-mclk";
+	};
+
+	clk_mlb_clk: clock-mlb-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "mlb_clk";
+	};
+
+	clk_sai5_rx_bclk: clock-sai5-rx-bclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai5_rx_bclk";
+	};
+
+	clk_sai5_tx_bclk: clock-sai5-tx-bclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai5_tx_bclk";
+	};
+
+	clk_sai6_rx_bclk: clock-sai6-rx-bclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai6_rx_bclk";
+	};
+
+	clk_sai6_tx_bclk: clock-sai6-tx-bclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai6_tx_bclk";
+	};
+
+	clk_spdif1_rx: clock-spdif1-rx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "spdif1_rx";
+	};
+
+	lvds_ipg_clk: clock-controller-lvds-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "lvds0_ipg_clk";
+	};
+
+	dsi_ipg_clk: clock-controller-dsi-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <120000000>;
+		clock-output-names = "dsi_ipg_clk";
+	};
+
+	mipi_pll_div2_clk: clock-controller-mipi-div2-pll {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <432000000>;
+		clock-output-names = "mipi_pll_div2_clk";
+	};
+
+	vpu_subsys_dsp: bus@55000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x55000000 0x0 0x55000000 0x1000000>;
+
+		vpu_dsp: dsp@556e8000 {
+			compatible = "fsl,imx8qm-hifi4";
+			reg = <0x556e8000 0x88000>;
+			clocks = <&clk_dummy>,
+				 <&clk_dummy>,
+				 <&clk_dummy>;
+			clock-names = "ipg", "ocram", "core";
+			power-domains = <&pd IMX_SC_R_MU_13B>,
+					<&pd IMX_SC_R_DSP>,
+					<&pd IMX_SC_R_DSP_RAM>,
+					<&pd IMX_SC_R_MU_2A>;
+			mboxes = <&lsio_mu13 0 0>,
+				 <&lsio_mu13 1 0>,
+				 <&lsio_mu13 3 0>;
+			mbox-names = "tx", "rx", "rxdb";
+			firmware-name = "imx/dsp/hifi4.bin";
+			status = "disabled";
+		};
+	};
+
 	/* sorted in register address */
+	#include "imx8-ss-security.dtsi"
+	#include "imx8-ss-cm41.dtsi"
+	#include "imx8-ss-audio.dtsi"
 	#include "imx8-ss-vpu.dtsi"
+	#include "imx8-ss-gpu0.dtsi"
+	#include "imx8-ss-mipi0.dtsi"
+	#include "imx8-ss-lvds0.dtsi"
+	#include "imx8-ss-mipi1.dtsi"
+	#include "imx8-ss-lvds1.dtsi"
 	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-dma.dtsi"
 	#include "imx8-ss-conn.dtsi"
 	#include "imx8-ss-lsio.dtsi"
+	#include "imx8-ss-hsio.dtsi"
 };
 
 #include "imx8qm-ss-img.dtsi"
 #include "imx8qm-ss-dma.dtsi"
 #include "imx8qm-ss-conn.dtsi"
 #include "imx8qm-ss-lsio.dtsi"
+#include "imx8qm-ss-audio.dtsi"
+#include "imx8qm-ss-lvds.dtsi"
+#include "imx8qm-ss-mipi.dtsi"
+#include "imx8qm-ss-hsio.dtsi"
+
+/delete-node/ &dsp;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso b/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso
new file mode 100644
index 000000000000..dd65ed8bb37c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c_mipi_csi0>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov5640_mipi: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&xtal24m>;
+		clock-names = "xclk";
+		pinctrl-0 = <&pinctrl_mipi_csi0>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lsio_gpio3 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&lsio_gpio3 8 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_2v8>;
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
+
+		port {
+			ov5640_mipi_ep: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi0_in>;
+			};
+		};
+	};
+};
+
+&irqsteer_csi0 {
+	status = "okay";
+};
+
+&isi {
+	status = "okay";
+};
+
+&mipi_csi_0 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_csi0_in: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5640_mipi_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 99611729943c..7b0337445541 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -12,10 +12,29 @@
 	model = "Freescale i.MX8QXP MEK";
 	compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
 
+	bt_sco_codec: audio-codec-bt {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
 	chosen {
 		stdout-path = &lpuart0;
 	};
 
+	imx8x_cm4: imx8x-cm4 {
+		compatible = "fsl,imx8qxp-cm4";
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu5 0 1
+			  &lsio_mu5 1 1
+			  &lsio_mu5 3 1>;
+		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+				<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+		power-domains = <&pd IMX_SC_R_M4_0_PID0>,
+				<&pd IMX_SC_R_M4_0_MU_1A>;
+		fsl,entry-address = <0x34fe0000>;
+		fsl,resource-id = <IMX_SC_R_M4_0_PID0>;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0 0x40000000>;
@@ -31,7 +50,7 @@
 	};
 
 	gpio-sbu-mux {
-		compatible = "gpio-sbu-mux";
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec_mux>;
 		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
@@ -44,9 +63,332 @@
 			};
 		};
 	};
+
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+		mux-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>; /* needs to be an unused GPIO */
+		i2c-parent = <&cm40_i2c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8960: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8962: wm8962@1a {
+				compatible = "wlf,wm8962";
+				reg = <0x1a>;
+				clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				AVDD-supply = <&reg_audio_1v8>;
+				CPVDD-supply = <&reg_audio_1v8>;
+				MICVDD-supply = <&reg_audio_3v3>;
+				PLLVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+	};
+
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_2v8: regulator-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	reg_pcieb: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "mpcie_3v3";
+		gpio = <&pca9557_a 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "cs42888_supply";
+	};
+
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can-en";
+		gpio = <&pca6416 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can-stby";
+		gpio = <&pca6416 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_en>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usbotg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_otg1_vbus";
+		gpio = <&pca9557_b 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		vdev0vring0: memory@90000000 {
+			reg = <0 0x90000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: memory@90008000 {
+			reg = <0 0x90008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: memory@90010000 {
+			reg = <0 0x90010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: memory@90018000 {
+			reg = <0 0x90018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: memory@900ff000 {
+			reg = <0 0x900ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: memory@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+		};
+
+		dsp_vdev0vring0: memory@942f0000 {
+			reg = <0 0x942f0000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0vring1: memory@942f8000 {
+			reg = <0 0x942f8000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0buffer: memory@94300000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x94300000 0 0x100000>;
+			no-map;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+		};
+
+		gpu_reserved: memory@880000000 {
+			no-map;
+			reg = <0x8 0x80000000 0 0x10000000>;
+		};
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,bitclock-master = <&btcpu>;
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,name = "bt-sco-audio";
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+
+		btcpu: simple-audio-card,cpu {
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+			sound-dai = <&sai0>;
+		};
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx-audio-cs42888";
+		audio-asrc = <&asrc0>;
+		audio-codec = <&cs42888>;
+		audio-cpu = <&esai0>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+		model = "imx-cs42888";
+	};
+
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8960>;
+		hp-det-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8962>;
+		hp-det-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HPOUTL",
+				"Headphone Jack", "HPOUTR",
+				"Ext Spk", "SPKOUTL",
+				"Ext Spk", "SPKOUTR",
+				"AMIC", "MICBIAS",
+				"IN3R", "AMIC",
+				"IN1R", "AMIC";
+	};
+};
+
+&amix {
+	status = "okay";
+};
+
+&asrc0 {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
 };
 
 &dsp {
+	memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+			<&dsp_vdev0vring1>, <&dsp_reserved>;
+	status = "okay";
+};
+
+&dsp_reserved {
+	status = "okay";
+};
+
+&esai0 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
+			<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			<&esai0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-parents = <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-0 = <&pinctrl_esai0>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
@@ -145,19 +487,13 @@
 	};
 
 	ptn5110: tcpc@50 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec>;
 		reg = <0x50>;
 		interrupt-parent = <&lsio_gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
-		port {
-			typec_dr_sw: endpoint {
-				remote-endpoint = <&usb3_drd_sw>;
-			};
-		};
-
 		usb_con1: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -169,8 +505,17 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
 				port@1 {
 					reg = <1>;
+
 					typec_con_ss: endpoint {
 						remote-endpoint = <&usb3_data_ss>;
 					};
@@ -181,6 +526,74 @@
 
 };
 
+&cm40_i2c {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_cm40_i2c>;
+	pinctrl-1 = <&pinctrl_cm40_i2c_gpio>;
+	scl-gpios = <&lsio_gpio1 10 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&lsio_gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	cs42888: audio-codec@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "mclk";
+		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+				<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+				<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+				<&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
+		reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>;
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+	};
+};
+
+&cm40_intmux {
+	status = "okay";
+};
+
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-x2-pcieb";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&jpegdec {
+	status = "okay";
+};
+
+&jpegenc {
+	status = "okay";
+};
+
 &lpuart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpuart0>;
@@ -199,6 +612,10 @@
 	status = "okay";
 };
 
+&lsio_mu5 {
+	status = "okay";
+};
+
 &mu_m0 {
 	status = "okay";
 };
@@ -207,10 +624,76 @@
 	status = "okay";
 };
 
+&pcie0 {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcieb>;
+	status = "okay";
+};
+
+&pcie0_ep {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_pcieb>;
+	status = "disabled";
+};
+
 &scu_key {
 	status = "okay";
 };
 
+&sai0 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai0>;
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&sai4 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai4_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&sai5 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai5_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
 &thermal_zones {
 	pmic-thermal {
 		polling-delay-passive = <250>;
@@ -272,6 +755,20 @@
 	status = "okay";
 };
 
+&usbphy1 {
+	status = "okay";
+};
+
+&usbotg1 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	disable-over-current;
+	power-active-high;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
 &usbotg3 {
 	status = "okay";
 };
@@ -307,6 +804,36 @@
 };
 
 &iomuxc {
+
+	pinctrl_cm40_i2c: cm40i2cgrp {
+		fsl,pins = <
+			IMX8QXP_ADC_IN1_M40_I2C0_SDA                            0x0600004c
+			IMX8QXP_ADC_IN0_M40_I2C0_SCL                            0x0600004c
+		>;
+	};
+
+	pinctrl_cm40_i2c_gpio: cm40i2cgpio-grp {
+		fsl,pins = <
+			IMX8QXP_ADC_IN1_LSIO_GPIO1_IO09				0xc600004c
+			IMX8QXP_ADC_IN0_LSIO_GPIO1_IO10				0xc600004c
+		>;
+	};
+
+	pinctrl_esai0: esai0grp {
+		fsl,pins = <
+			IMX8QXP_ESAI0_FSR_ADMA_ESAI0_FSR           0xc6000040
+			IMX8QXP_ESAI0_FST_ADMA_ESAI0_FST           0xc6000040
+			IMX8QXP_ESAI0_SCKR_ADMA_ESAI0_SCKR         0xc6000040
+			IMX8QXP_ESAI0_SCKT_ADMA_ESAI0_SCKT         0xc6000040
+			IMX8QXP_ESAI0_TX0_ADMA_ESAI0_TX0           0xc6000040
+			IMX8QXP_ESAI0_TX1_ADMA_ESAI0_TX1           0xc6000040
+			IMX8QXP_ESAI0_TX2_RX3_ADMA_ESAI0_TX2_RX3   0xc6000040
+			IMX8QXP_ESAI0_TX3_RX2_ADMA_ESAI0_TX3_RX2   0xc6000040
+			IMX8QXP_ESAI0_TX4_RX1_ADMA_ESAI0_TX4_RX1   0xc6000040
+			IMX8QXP_ESAI0_TX5_RX0_ADMA_ESAI0_TX5_RX0   0xc6000040
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020
@@ -326,6 +853,27 @@
 		>;
 	};
 
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <
+			IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX			0x21
+			IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX			0x21
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <
+			IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX			0x21
+			IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX			0x21
+		>;
+	};
+
+	pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp {
+		fsl,pins = <
+			IMX8QXP_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL		0xc2000020
+			IMX8QXP_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA		0xc2000020
+		>;
+	};
+
 	pinctrl_ioexp_rst: ioexprstgrp {
 		fsl,pins = <
 			IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01			0x06000021
@@ -366,6 +914,22 @@
 		>;
 	};
 
+	pinctrl_mipi_csi0: mipi-csi0grp {
+		fsl,pins = <
+			IMX8QXP_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07		0xC0000041
+			IMX8QXP_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08		0xC0000041
+			IMX8QXP_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT	0xC0000041
+		>;
+	};
+
+	pinctrl_pcieb: pcieagrp {
+		fsl,pins = <
+			IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00		0x06000021
+			IMX8QXP_PCIE_CTRL0_CLKREQ_B_HSIO_PCIE0_CLKREQ_B		0x06000021
+			IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02		0x04000021
+		>;
+	};
+
 	pinctrl_typec: typecgrp {
 		fsl,pins = <
 			IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03                        0x06000021
@@ -378,6 +942,25 @@
 		>;
 	};
 
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <
+			IMX8QXP_SAI0_TXD_ADMA_SAI0_TXD		0x06000060
+			IMX8QXP_SAI0_RXD_ADMA_SAI0_RXD		0x06000040
+			IMX8QXP_SAI0_TXC_ADMA_SAI0_TXC		0x06000040
+			IMX8QXP_SAI0_TXFS_ADMA_SAI0_TXFS	0x06000040
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX8QXP_SAI1_RXD_ADMA_SAI1_RXD     0x06000040
+			IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC     0x06000040
+			IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS   0x06000040
+			IMX8QXP_SPI0_CS1_ADMA_SAI1_TXD     0x06000060
+			IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00   0x06000040
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
index 46da21af3702..4eb48ad48745 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
@@ -4,6 +4,10 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+&usbphy1 {
+	compatible = "fsl,imx8qxp-usbphy", "fsl,imx7ulp-usbphy";
+};
+
 &usdhc1 {
 	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi
new file mode 100644
index 000000000000..255b8c91c88c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *	Richard Zhu <hongxing.zhu@nxp.com>
+ */
+
+&hsio_subsys {
+	phyx1_lpcg: clock-controller@5f090000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f090000 0x10000>;
+		clocks = <&hsio_refb_clk>, <&hsio_per_clk>,
+			 <&hsio_per_clk>, <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_phyx1_pclk",
+				     "hsio_phyx1_epcs_tx_clk",
+				     "hsio_phyx1_epcs_rx_clk",
+				     "hsio_phyx1_apb_clk";
+		power-domains = <&pd IMX_SC_R_SERDES_1>;
+	};
+
+	hsio_phy: phy@5f1a0000 {
+		compatible = "fsl,imx8qxp-hsio";
+		reg = <0x5f1a0000 0x10000>,
+		      <0x5f120000 0x10000>,
+		      <0x5f140000 0x10000>,
+		      <0x5f160000 0x10000>;
+		reg-names = "reg", "phy", "ctrl", "misc";
+		clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>,
+			 <&phyx1_lpcg IMX_LPCG_CLK_1>,
+			 <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
+			 <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
+			 <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr",
+			      "misc_crr";
+		#phy-cells = <3>;
+		power-domains = <&pd IMX_SC_R_SERDES_1>;
+		status = "disabled";
+	};
+
+	pcie0: pcie@5f010000 {
+	};
+
+	pcie0_ep: pcie-ep@5f010000 {
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
index 3a087317591d..232cf25dadfc 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
@@ -4,6 +4,86 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+&csi1_pxl_lpcg {
+	status = "disabled";
+};
+
+&csi1_core_lpcg {
+	status = "disabled";
+};
+
+&csi1_esc_lpcg {
+	status = "disabled";
+};
+
+&gpio0_mipi_csi1 {
+	status = "disabled";
+};
+
+&i2c_mipi_csi1 {
+	status = "disabled";
+};
+
+&irqsteer_csi1 {
+	status = "disabled";
+};
+
+&isi {
+	compatible = "fsl,imx8qxp-isi";
+	reg = <0x58100000 0x60000>;
+	interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma1_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma2_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma3_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma4_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma5_lpcg IMX_LPCG_CLK_0>;
+	clock-names = "per0", "per1", "per2", "per3", "per4", "per5";
+	power-domains = <&pd IMX_SC_R_ISI_CH0>,
+			<&pd IMX_SC_R_ISI_CH1>,
+			<&pd IMX_SC_R_ISI_CH2>,
+			<&pd IMX_SC_R_ISI_CH3>,
+			<&pd IMX_SC_R_ISI_CH4>,
+			<&pd IMX_SC_R_ISI_CH5>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@2 {
+			reg = <2>;
+
+			isi_in_2: endpoint {
+				remote-endpoint = <&mipi_csi0_out>;
+			};
+		};
+	};
+};
+
+&mipi_csi_0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			mipi_csi0_out: endpoint {
+				remote-endpoint = <&isi_in_2>;
+			};
+		};
+	};
+};
+
 &jpegdec {
 	compatible = "nxp,imx8qxp-jpgdec";
 };
@@ -11,3 +91,7 @@
 &jpegenc {
 	compatible = "nxp,imx8qxp-jpgenc";
 };
+
+&mipi_csi_1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi
new file mode 100644
index 000000000000..15f1239dab24
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2025 Actia Nordic AB
+ */
+
+&crypto {
+	compatible = "fsl,imx8qxp-caam", "fsl,sec-v4.0";
+};
+
+&sec_jr2 {
+	compatible = "fsl,imx8qxp-job-ring", "fsl,sec-v4.0-job-ring";
+};
+
+&sec_jr3 {
+	compatible = "fsl,imx8qxp-job-ring", "fsl,sec-v4.0-job-ring";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
new file mode 100644
index 000000000000..f81937b5fb72
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+&mu_m0 {
+	interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mu1_m0 {
+	interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&vpu_core0 {
+	reg = <0x2d040000 0x10000>;
+};
+
+&vpu_core1 {
+	reg = <0x2d050000 0x10000>;
+};
+
+/delete-node/ &mu2_m0;
+/delete-node/ &vpu_core2;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts
new file mode 100644
index 000000000000..7d2e98bf8bc5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-tqma8xqp.dtsi"
+#include "mba8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQP on MBa8Xx";
+	compatible = "tq,imx8qxp-tqma8xqp-mba8xx", "tq,imx8qxp-tqma8xqp", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi
new file mode 100644
index 000000000000..b14040bf4ddd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8qxp.dtsi"
+#include "tqma8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQP";
+	compatible = "tq,imx8qxp-tqma8xqp", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps-mb-smarc-2.dts b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps-mb-smarc-2.dts
new file mode 100644
index 000000000000..3fa9b5aee2c3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps-mb-smarc-2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-tqma8xqps.dtsi"
+#include "tqma8xxs-mb-smarc-2.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQPS on MB-SMARC-2";
+	compatible = "tq,imx8qxp-tqma8xqps-mb-smarc-2", "tq,imx8qxp-tqma8xqps", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps.dtsi
new file mode 100644
index 000000000000..f008b7a34505
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8qxp.dtsi"
+#include "tqma8xxs.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQPS";
+	compatible = "tq,imx8qxp-tqma8xqps", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index c80c85a4b405..95edab058276 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -46,9 +46,12 @@
 		serial1 = &lpuart1;
 		serial2 = &lpuart2;
 		serial3 = &lpuart3;
+		spi0 = &lpspi0;
+		spi1 = &lpspi1;
+		spi2 = &lpspi2;
+		spi3 = &lpspi3;
 		vpu-core0 = &vpu_core0;
 		vpu-core1 = &vpu_core1;
-		vpu-core2 = &vpu_core2;
 	};
 
 	cpus {
@@ -156,6 +159,7 @@
 		compatible = "arm,gic-v3";
 		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
 		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -184,6 +188,7 @@
 		dsp_reserved: dsp@92400000 {
 			reg = <0 0x92400000 0 0x2000000>;
 			no-map;
+			status = "disabled";
 		};
 
 		encoder_rpc: encoder-rpc@94400000 {
@@ -237,6 +242,11 @@
 			status = "disabled";
 		};
 
+		scu_reset: reset-controller {
+			compatible = "fsl,imx-scu-reset";
+			#reset-cells = <1>;
+		};
+
 		rtc: rtc {
 			compatible = "fsl,imx8qxp-sc-rtc";
 		};
@@ -260,6 +270,13 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
 	};
 
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
+
 	xtal32k: clock-xtal32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -310,13 +327,20 @@
 	/* sorted in register address */
 	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-vpu.dtsi"
+	#include "imx8-ss-security.dtsi"
+	#include "imx8-ss-cm40.dtsi"
+	#include "imx8-ss-gpu0.dtsi"
 	#include "imx8-ss-adma.dtsi"
 	#include "imx8-ss-conn.dtsi"
 	#include "imx8-ss-ddr.dtsi"
 	#include "imx8-ss-lsio.dtsi"
+	#include "imx8-ss-hsio.dtsi"
 };
 
 #include "imx8qxp-ss-img.dtsi"
+#include "imx8qxp-ss-vpu.dtsi"
+#include "imx8qxp-ss-security.dtsi"
 #include "imx8qxp-ss-adma.dtsi"
 #include "imx8qxp-ss-conn.dtsi"
 #include "imx8qxp-ss-lsio.dtsi"
+#include "imx8qxp-ss-hsio.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts
new file mode 100644
index 000000000000..5497e3d78136
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8ulp-evk.dts"
+
+/ {
+	model = "NXP i.MX8ULP EVK9";
+	compatible = "fsl,imx8ulp-9x9-evk", "fsl,imx8ulp";
+};
+
+&btcpu {
+	sound-dai = <&sai6>;
+};
+
+&iomuxc1 {
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE10__I2S6_TX_BCLK  0x43
+			MX8ULP_PAD_PTE11__I2S6_TX_FS    0x43
+			MX8ULP_PAD_PTE14__I2S6_TXD2     0x43
+			MX8ULP_PAD_PTE6__I2S6_RXD0      0x43
+		>;
+	};
+};
+
+&pinctrl_enet {
+	fsl,pins = <
+		MX8ULP_PAD_PTF9__ENET0_MDC		0x43
+		MX8ULP_PAD_PTF8__ENET0_MDIO             0x43
+		MX8ULP_PAD_PTF5__ENET0_RXER             0x43
+		MX8ULP_PAD_PTF6__ENET0_CRS_DV           0x43
+		MX8ULP_PAD_PTF1__ENET0_RXD0             0x43
+		MX8ULP_PAD_PTF0__ENET0_RXD1             0x43
+		MX8ULP_PAD_PTF4__ENET0_TXEN             0x43
+		MX8ULP_PAD_PTF3__ENET0_TXD0             0x43
+		MX8ULP_PAD_PTF2__ENET0_TXD1             0x43
+		MX8ULP_PAD_PTF7__ENET0_REFCLK           0x43
+		MX8ULP_PAD_PTF10__ENET0_1588_CLKIN      0x43
+	>;
+};
+
+&pinctrl_usb1 {
+	fsl,pins = <
+		MX8ULP_PAD_PTE16__USB0_ID		0x10003
+		MX8ULP_PAD_PTE18__USB0_OC		0x10003
+	>;
+};
+
+&pinctrl_usb2 {
+	fsl,pins = <
+		MX8ULP_PAD_PTD23__USB1_ID		0x10003
+		MX8ULP_PAD_PTE20__USB1_OC		0x10003
+	>;
+};
+
+&sai6 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai6>;
+	pinctrl-1 = <&pinctrl_sai6>;
+	assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>, <&cgc2 IMX8ULP_CLK_SAI6_SEL>;
+	assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>;
+	assigned-clock-rates = <12288000>;
+	fsl,dataline = <1 0x01 0x04>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
index 69dd8e31027c..290a49bea2f7 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -11,6 +11,11 @@
 	model = "NXP i.MX8ULP EVK";
 	compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp";
 
+	bt_sco_codec: bt-sco-codec {
+		#sound-dai-cells = <1>;
+		compatible = "linux,bt-sco";
+	};
+
 	chosen {
 		stdout-path = &lpuart5;
 	};
@@ -37,7 +42,7 @@
 			no-map;
 		};
 
-		rsc_table: rsc-table@1fff8000{
+		rsc_table: rsc-table@1fff8000 {
 			reg = <0 0x1fff8000 0 0x1000>;
 			no-map;
 		};
@@ -83,6 +88,37 @@
 		clock-output-names = "ext_ts_clk";
 		#clock-cells = <0>;
 	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
 };
 
 &cm33 {
@@ -127,12 +163,89 @@
 	pinctrl-1 = <&pinctrl_lpi2c7>;
 	status = "okay";
 
+	ptn5150_1: typec@1d {
+		compatible = "nxp,ptn5150";
+		reg = <0x1d>;
+		int-gpios = <&gpiof 3 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		status = "disabled";
+	};
+
 	pcal6408: gpio@21 {
 		compatible = "nxp,pcal9554b";
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	ptn5150_2: typec@3d {
+		compatible = "nxp,ptn5150";
+		reg = <0x3d>;
+		int-gpios = <&gpiof 5 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec2>;
+		status = "disabled";
+	};
+};
+
+&sai5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai5>;
+	pinctrl-1 = <&pinctrl_sai5>;
+	assigned-clocks = <&cgc1 IMX8ULP_CLK_SAI5_SEL>;
+	assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>;
+	fsl,dataline = <1 0x08 0x01>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_spdif>;
+	pinctrl-1 = <&pinctrl_spdif>;
+	assigned-clocks = <&cgc2 IMX8ULP_CLK_SPDIF_SEL>;
+	assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <110>;
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2>;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <110>;
+	status = "okay";
+};
+
+&usbmisc2 {
+	status = "okay";
 };
 
 &usdhc0 {
@@ -224,6 +337,47 @@
 		>;
 	};
 
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF26__I2S5_TX_BCLK	0x43
+			MX8ULP_PAD_PTF27__I2S5_TX_FS	0x43
+			MX8ULP_PAD_PTF28__I2S5_TXD0	0x43
+			MX8ULP_PAD_PTF24__I2S5_RXD3	0x43
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF25__SPDIF_OUT1    0x43
+		>;
+	};
+
+	pinctrl_typec1: typec1grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF3__PTF3           0x3
+		>;
+	};
+
+	pinctrl_typec2: typec2grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF5__PTF5           0x3
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF2__USB0_ID	0x10003
+			MX8ULP_PAD_PTF4__USB0_OC	0x10003
+		>;
+	};
+
+	pinctrl_usb2: usb2grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTD23__USB1_ID	0x10003
+			MX8ULP_PAD_PTF6__USB1_OC	0x10003
+		>;
+	};
+
 	pinctrl_usdhc0: usdhc0grp {
 		fsl,pins = <
 			MX8ULP_PAD_PTD1__SDHC0_CMD	0x3
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index c4a0082f30d3..13b01f3aa2a4 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -28,6 +28,8 @@
 		serial1 = &lpuart5;
 		serial2 = &lpuart6;
 		serial3 = &lpuart7;
+		spi0 = &lpspi4;
+		spi1 = &lpspi5;
 	};
 
 	cpus {
@@ -212,6 +214,70 @@
 			#size-cells = <1>;
 			ranges;
 
+			edma1: dma-controller@29010000 {
+				compatible = "fsl,imx8ulp-edma";
+				reg = <0x29010000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <32>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_DMA1_MP>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH0>, <&pcc3 IMX8ULP_CLK_DMA1_CH1>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH2>, <&pcc3 IMX8ULP_CLK_DMA1_CH3>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH4>, <&pcc3 IMX8ULP_CLK_DMA1_CH5>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH6>, <&pcc3 IMX8ULP_CLK_DMA1_CH7>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH8>, <&pcc3 IMX8ULP_CLK_DMA1_CH9>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH10>, <&pcc3 IMX8ULP_CLK_DMA1_CH11>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH12>, <&pcc3 IMX8ULP_CLK_DMA1_CH13>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH14>, <&pcc3 IMX8ULP_CLK_DMA1_CH15>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH16>, <&pcc3 IMX8ULP_CLK_DMA1_CH17>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH18>, <&pcc3 IMX8ULP_CLK_DMA1_CH19>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH20>, <&pcc3 IMX8ULP_CLK_DMA1_CH21>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH22>, <&pcc3 IMX8ULP_CLK_DMA1_CH23>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH24>, <&pcc3 IMX8ULP_CLK_DMA1_CH25>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH26>, <&pcc3 IMX8ULP_CLK_DMA1_CH27>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH28>, <&pcc3 IMX8ULP_CLK_DMA1_CH29>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH30>, <&pcc3 IMX8ULP_CLK_DMA1_CH31>;
+				clock-names = "dma", "ch00","ch01", "ch02", "ch03",
+						"ch04", "ch05", "ch06", "ch07",
+						"ch08", "ch09", "ch10", "ch11",
+						"ch12", "ch13", "ch14", "ch15",
+						"ch16", "ch17", "ch18", "ch19",
+						"ch20", "ch21", "ch22", "ch23",
+						"ch24", "ch25", "ch26", "ch27",
+						"ch28", "ch29", "ch30", "ch31";
+			};
+
 			mu: mailbox@29220000 {
 				compatible = "fsl,imx8ulp-mu";
 				reg = <0x29220000 0x10000>;
@@ -252,6 +318,38 @@
 				#reset-cells = <1>;
 			};
 
+			crypto: crypto@292e0000 {
+				compatible = "fsl,sec-v4.0";
+				reg = <0x292e0000 0x10000>;
+				ranges = <0 0x292e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr3: jr@4000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x4000 0x1000>;
+					interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
 			tpm5: tpm@29340000 {
 				compatible = "fsl,imx8ulp-tpm", "fsl,imx7ulp-tpm";
 				reg = <0x29340000 0x1000>;
@@ -352,7 +450,7 @@
 			};
 
 			flexspi2: spi@29810000 {
-				compatible = "nxp,imx8mm-fspi";
+				compatible = "nxp,imx8ulp-fspi";
 				reg = <0x29810000 0x10000>, <0x60000000 0x10000000>;
 				reg-names = "fspi_base", "fspi_mmap";
 				#address-cells = <1>;
@@ -410,6 +508,36 @@
 				status = "disabled";
 			};
 
+			sai4: sai@29880000 {
+				compatible = "fsl,imx8ulp-sai";
+				reg = <0x29880000 0x10000>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_SAI4>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc1 IMX8ULP_CLK_SAI4_SEL>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc1 IMX8ULP_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 67 0 1>, <&edma1 68 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				fsl,dataline = <0 0x03 0x03>;
+				status = "disabled";
+			};
+
+			sai5: sai@29890000 {
+				compatible = "fsl,imx8ulp-sai";
+				reg = <0x29890000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_SAI5>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc1 IMX8ULP_CLK_SAI5_SEL>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc1 IMX8ULP_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 69 0 1>, <&edma1 70 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				fsl,dataline = <0 0x0f 0x0f>;
+				status = "disabled";
+			};
+
 			iomuxc1: pinctrl@298c0000 {
 				compatible = "fsl,imx8ulp-iomuxc1";
 				reg = <0x298c0000 0x10000>;
@@ -472,6 +600,68 @@
 				status = "disabled";
 			};
 
+			usbotg1: usb@29900000 {
+				compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+				reg = <0x29900000 0x200>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_USB0>;
+				power-domains = <&scmi_devpd IMX8ULP_PD_USB0>;
+				phys = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x8>;
+				rx-burst-size-dword = <0x8>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@29900200 {
+				compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
+				reg = <0x29900200 0x200>;
+				#index-cells = <1>;
+				status = "disabled";
+			};
+
+			usbphy1: usb-phy@29910000 {
+				compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy";
+				reg = <0x29910000 0x10000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_USB0_PHY>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@29920000 {
+				compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+				reg = <0x29920000 0x200>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_USB1>;
+				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
+				phys = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc2 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x8>;
+				rx-burst-size-dword = <0x8>;
+				status = "disabled";
+			};
+
+			usbmisc2: usbmisc@29920200 {
+				compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
+				reg = <0x29920200 0x200>;
+				#index-cells = <1>;
+				status = "disabled";
+			};
+
+			usbphy2: usb-phy@29930000 {
+				compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy";
+				reg = <0x29930000 0x10000>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_USB1_PHY>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
 			fec: ethernet@29950000 {
 				compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec";
 				reg = <0x29950000 0x10000>;
@@ -496,6 +686,7 @@
 					 <&pcc4 IMX8ULP_CLK_PCTLE>;
 				clock-names = "gpio", "port";
 				gpio-ranges = <&iomuxc1 0 32 24>;
+				ngpios = <24>;
 		};
 
 		gpiof: gpio@2d010000 {
@@ -511,6 +702,7 @@
 					 <&pcc4 IMX8ULP_CLK_PCTLF>;
 				clock-names = "gpio", "port";
 				gpio-ranges = <&iomuxc1 0 64 32>;
+				ngpios = <32>;
 		};
 
 		per_bridge5: bus@2d800000 {
@@ -520,6 +712,70 @@
 			#size-cells = <1>;
 			ranges;
 
+			edma2: dma-controller@2d800000 {
+				compatible = "fsl,imx8ulp-edma";
+				reg = <0x2d800000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <32>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc5 IMX8ULP_CLK_DMA2_MP>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH0>, <&pcc5 IMX8ULP_CLK_DMA2_CH1>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH2>, <&pcc5 IMX8ULP_CLK_DMA2_CH3>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH4>, <&pcc5 IMX8ULP_CLK_DMA2_CH5>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH6>, <&pcc5 IMX8ULP_CLK_DMA2_CH7>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH8>, <&pcc5 IMX8ULP_CLK_DMA2_CH9>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH10>, <&pcc5 IMX8ULP_CLK_DMA2_CH11>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH12>, <&pcc5 IMX8ULP_CLK_DMA2_CH13>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH14>, <&pcc5 IMX8ULP_CLK_DMA2_CH15>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH16>, <&pcc5 IMX8ULP_CLK_DMA2_CH17>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH18>, <&pcc5 IMX8ULP_CLK_DMA2_CH19>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH20>, <&pcc5 IMX8ULP_CLK_DMA2_CH21>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH22>, <&pcc5 IMX8ULP_CLK_DMA2_CH23>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH24>, <&pcc5 IMX8ULP_CLK_DMA2_CH25>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH26>, <&pcc5 IMX8ULP_CLK_DMA2_CH27>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH28>, <&pcc5 IMX8ULP_CLK_DMA2_CH29>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH30>, <&pcc5 IMX8ULP_CLK_DMA2_CH31>;
+				clock-names = "dma", "ch00","ch01", "ch02", "ch03",
+						"ch04", "ch05", "ch06", "ch07",
+						"ch08", "ch09", "ch10", "ch11",
+						"ch12", "ch13", "ch14", "ch15",
+						"ch16", "ch17", "ch18", "ch19",
+						"ch20", "ch21", "ch22", "ch23",
+						"ch24", "ch25", "ch26", "ch27",
+						"ch28", "ch29", "ch30", "ch31";
+			};
+
 			cgc2: clock-controller@2da60000 {
 				compatible = "fsl,imx8ulp-cgc2";
 				reg = <0x2da60000 0x10000>;
@@ -532,6 +788,60 @@
 				#clock-cells = <1>;
 				#reset-cells = <1>;
 			};
+
+			sai6: sai@2da90000 {
+				compatible = "fsl,imx8ulp-sai";
+				reg = <0x2da90000 0x10000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc5 IMX8ULP_CLK_SAI6>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc2 IMX8ULP_CLK_SAI6_SEL>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc1 IMX8ULP_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 71 0 1>, <&edma2 72 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				fsl,dataline = <0 0x0f 0x0f>;
+				status = "disabled";
+			};
+
+			sai7: sai@2daa0000 {
+				compatible = "fsl,imx8ulp-sai";
+				reg = <0x2daa0000 0x10000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc5 IMX8ULP_CLK_SAI7>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc2 IMX8ULP_CLK_SAI7_SEL>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc1 IMX8ULP_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 73 0 1>, <&edma2 74 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				fsl,dataline = <0 0x0f 0x0f>;
+				status = "disabled";
+			};
+
+			spdif: spdif@2dab0000 {
+				compatible = "fsl,imx8ulp-spdif";
+				reg = <0x2dab0000 0x10000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc5 IMX8ULP_CLK_SPDIF>, /* core */
+					 <&sosc>, /* 0, extal */
+					 <&cgc2 IMX8ULP_CLK_SPDIF_SEL>, /* 1, tx */
+					 <&cgc1 IMX8ULP_CLK_DUMMY>, /* 2, tx1 */
+					 <&cgc1 IMX8ULP_CLK_DUMMY>, /* 3, tx2 */
+					 <&cgc1 IMX8ULP_CLK_DUMMY>, /* 4, tx3 */
+					 <&pcc5 IMX8ULP_CLK_SPDIF>, /* 5, sys */
+					 <&cgc1 IMX8ULP_CLK_DUMMY>, /* 6, tx4 */
+					 <&cgc1 IMX8ULP_CLK_DUMMY>, /* 7, tx5 */
+					 <&cgc1 IMX8ULP_CLK_DUMMY>; /* spba */
+				clock-names = "core", "rxtx0",
+					      "rxtx1", "rxtx2",
+					      "rxtx3", "rxtx4",
+					      "rxtx5", "rxtx6",
+					      "rxtx7", "spba";
+				dmas = <&edma2 75 0 5>, <&edma2 76 0 4>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
 		};
 
 		gpiod: gpio@2e200000 {
@@ -547,6 +857,7 @@
 				 <&pcc5 IMX8ULP_CLK_RGPIOD>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 0 24>;
+			ngpios = <24>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
index bc659066e19a..f7bbb2153ae0 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
@@ -3,10 +3,24 @@
  * Copyright 2018-2021 Toradex
  */
 
+/* Colibri Analogue Inputs */
+&adc0 {
+	status = "okay";
+};
+
+/* Colibri PWM_A */
+&adma_pwm {
+	status = "okay";
+};
+
 &colibri_gpio_keys {
 	status = "okay";
 };
 
+&extcon_usbc_det {
+	status = "okay";
+};
+
 /* Colibri Ethernet */
 &fec1 {
 	status = "okay";
@@ -38,6 +52,28 @@
 	status = "okay";
 };
 
+/* USB PHY for usbotg3 */
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	status = "okay";
+};
+
+/* USB PHY for usbotg1 */
+&usbphy1 {
+	status = "okay";
+};
+
 /* Colibri SDCard */
 &usdhc2 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
index 9af769ab8ceb..f75499765d85 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
@@ -19,10 +19,24 @@
 	};
 };
 
+/* Colibri Analogue Inputs */
+&adc0 {
+	status = "okay";
+};
+
+/* Colibri PWM_A */
+&adma_pwm {
+	status = "okay";
+};
+
 &colibri_gpio_keys {
 	status = "okay";
 };
 
+&extcon_usbc_det {
+	status = "okay";
+};
+
 &i2c1 {
 	status = "okay";
 
@@ -90,6 +104,28 @@
 	status = "okay";
 };
 
+/* USB PHY for usbotg3 */
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	status = "okay";
+};
+
+/* USB PHY for usbotg1 */
+&usbphy1 {
+	status = "okay";
+};
+
 /* Colibri SD/MMC Card */
 &usdhc2 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi
index 8d06925a8ebd..54393a0c5cbf 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi
@@ -17,10 +17,24 @@
 	};
 };
 
+/* Colibri Analogue Inputs */
+&adc0 {
+	status = "okay";
+};
+
+/* Colibri PWM_A */
+&adma_pwm {
+	status = "okay";
+};
+
 &colibri_gpio_keys {
 	status = "okay";
 };
 
+&extcon_usbc_det {
+	status = "okay";
+};
+
 /* Colibri FastEthernet */
 &fec1 {
 	status = "okay";
@@ -108,6 +122,28 @@
 	status = "okay";
 };
 
+/* USB PHY for usbotg3 */
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	status = "okay";
+};
+
+/* USB PHY for usbotg1 */
+&usbphy1 {
+	status = "okay";
+};
+
 /* Colibri SD/MMC Card */
 &usdhc2 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index 49d105eb4769..8e9e841cc828 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -23,17 +23,85 @@
 		};
 	};
 
+	extcon_usbc_det: usbc-det {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+		id-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
 	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+V3.3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_AVDD_AUDIO";
+	};
+
+	reg_module_vref_1v8: regulator-module-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vref-1v8";
+	};
+
+	reg_module_wifi: regulator-module-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio_expander_43 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-name = "Wi-Fi_PDn";
+		startup-delay-us = <2000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_reg>;
+		gpio = <&lsio_gpio4 3 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usbh_vbus";
+	};
+
+	sound-card {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "colibri-imx8x";
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+			sound-dai = <&sgtl5000_a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai0>;
+		};
+	};
 };
 
-/* TODO Analogue Inputs */
+/* Colibri Analogue Inputs */
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0>;
+	vref-supply = <&reg_module_vref_1v8>;
+};
 
-/* TODO Cooling maps for DX */
+/* Colibri PWM_A */
+&adma_pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_a>;
+};
 
 &cpu_alert0 {
 	hysteresis = <2000>;
@@ -47,9 +115,20 @@
 	type = "critical";
 };
 
-/* TODO flexcan1 - 3 */
-
-/* TODO GPU */
+&enet0_lpcg {
+	clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+		 <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+		 <&conn_axi_clk>,
+		 <&clk IMX_SC_R_ENET_0 IMX_SC_C_DISABLE_50>,
+		 <&conn_ipg_clk>,
+		 <&conn_ipg_clk>;
+	clock-output-names = "enet0_lpcg_timer_clk",
+			     "enet0_lpcg_txc_sampling_clk",
+			     "enet0_lpcg_ahb_clk",
+			     "enet0_lpcg_ref_50mhz_clk",
+			     "enet0_lpcg_ipg_clk",
+			     "enet0_lpcg_ipg_s_clk";
+};
 
 /* On-module I2C */
 &i2c0 {
@@ -60,8 +139,43 @@
 	pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>;
 	status = "okay";
 
+	/* USB HUB USB3803 */
+	usb-hub@8 {
+		compatible = "smsc,usb3803";
+		reg = <0x8>;
+		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <786432000>, <49152000>, <12000000>, <12000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb3503a>;
+		bypass-gpios = <&gpio_expander_43 5 GPIO_ACTIVE_LOW>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "refclk";
+		disabled-ports = <2>;
+		initial-mode = <1>;
+		intn-gpios = <&lsio_gpio3 4 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio_expander_43 4 GPIO_ACTIVE_LOW>;
+	};
+
+	sgtl5000_a: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <786432000>, <49152000>, <12000000>, <12000000>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		VDDA-supply = <&reg_module_3v3_avdd>;
+		VDDD-supply = <&reg_module_vref_1v8>;
+		VDDIO-supply = <&reg_module_3v3>;
+	};
+
 	/* Touch controller */
-	touchscreen@2c {
+	ad7879_ts: touchscreen@2c {
 		compatible = "adi,ad7879-1";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ad7879_int>;
@@ -77,6 +191,21 @@
 		adi,conversion-interval = /bits/ 8 <255>;
 		status = "disabled";
 	};
+
+	gpio_expander_43: gpio@43 {
+		compatible = "fcs,fxl6408";
+		reg = <0x43>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "Wi-Fi_W_DISABLE",
+				  "Wi-Fi_WKUP_WLAN",
+				  "PWR_EN_+V3.3_WiFi_N",
+				  "PCIe_REF_CLK_EN",
+				  "USB_RESET_N",
+				  "USB_BYPASS_N",
+				  "Wi-Fi_PDn",
+				  "Wi-Fi_WKUP_BT";
+	};
 };
 
 /* TODO i2c lvds0 accessible on FFC (X2) */
@@ -141,6 +270,16 @@
 	};
 };
 
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-x2-pcieb";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&hsio_refb_clk {
+	enable-gpios = <&gpio_expander_43 3 GPIO_ACTIVE_HIGH>;
+};
+
 /* Colibri SPI */
 &lpspi2 {
 	pinctrl-names = "default";
@@ -175,8 +314,8 @@
 			  "",
 			  "SODIMM_61",
 			  "SODIMM_103",
-			  "",
-			  "",
+			  "SODIMM_79",
+			  "SODIMM_97",
 			  "",
 			  "SODIMM_25",
 			  "SODIMM_27",
@@ -321,13 +460,82 @@
 	pinctrl-names = "default";
 };
 
+/* VPU Mailboxes */
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
 /* TODO MIPI CSI */
 
 /* TODO MIPI DSI with DSI-to-HDMI bridge lt8912 */
 
-/* TODO on-module PCIe for Wi-Fi */
+/* On-module PCIe for Wi-Fi */
+&pcieb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* On-module I2S */
+&sai0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai0>;
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
 
-/* TODO On-module i2s / Audio */
+		cooling-maps {
+			pmic_cooling_map0: map0 {
+				trip = <&pmic_alert0>;
+				cooling-device = <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current;
+	extcon = <&extcon_usbc_det &extcon_usbc_det>;
+	hnp-disable;
+	power-active-high;
+	srp-disable;
+	vbus-supply = <&reg_usbh_vbus>;
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "host";
+};
 
 /* On-module eMMC */
 &usdhc1 {
@@ -356,11 +564,24 @@
 	no-1-8-v;
 };
 
-/* TODO USB Client/Host */
+&vpu {
+	compatible = "nxp,imx8qxp-vpu";
+	status = "okay";
+};
 
-/* TODO USB Host */
+/* VPU Decoder */
+&vpu_core0 {
+	reg = <0x2d040000 0x10000>;
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
 
-/* TODO VPU Encoder/Decoder */
+/* VPU Encoder */
+&vpu_core1 {
+	reg = <0x2d050000 0x10000>;
+	memory-region = <&encoder_boot>, <&encoder_rpc>;
+	status = "okay";
+};
 
 &iomuxc {
 	/* On-module touch pen-down interrupt */
@@ -504,7 +725,7 @@
 
 	/*
 	 * This pin is used in the SCFW as a UART. Using it from
-	 * Linux would require rewritting the SCFW board file.
+	 * Linux would require rewriting the SCFW board file.
 	 */
 	pinctrl_hog_scfw: hogscfwgrp {
 		fsl,pins = <IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03		0x20>;		/* SODIMM 144 */
diff --git a/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
new file mode 100644
index 000000000000..aca78768dbd4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx91.dtsi"
+
+/ {
+	compatible = "fsl,imx91-11x11-evk", "fsl,imx91";
+	model = "NXP i.MX91 11X11 EVK board";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vref_1v8";
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "audio-pwr";
+		gpio = <&adp5585 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			reusable;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&eqos {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-1 = <&pinctrl_eqos_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&fec {
+	phy-handle = <&ethphy2>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+	pinctrl-names = "default", "sleep";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	audio_codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX93_CLK_SAI3_GATE>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	inertial-meter@6a {
+		compatible = "st,lsm6dso";
+		reg = <0x6a>;
+	};
+};
+
+&lpi2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio3>;
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		pinctrl-names = "default";
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&pcal6524>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2237500>;
+				regulator-min-microvolt = <650000>;
+				regulator-name = "BUCK1";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK2";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK4";
+			};
+
+			buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK5";
+			};
+
+			buck6: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK6";
+			};
+
+			ldo1: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1600000>;
+				regulator-name = "LDO1";
+			};
+
+			ldo4: LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "LDO4";
+			};
+
+			ldo5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+
+	adp5585: io-expander@34 {
+		compatible = "adi,adp5585-00", "adi,adp5585";
+		reg = <0x34>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#pwm-cells = <3>;
+		gpio-reserved-ranges = <5 1>;
+
+		exp-sel-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio3>;
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <15000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	ptn5110_2: tcpc@51 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x51>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio3>;
+		status = "okay";
+
+		typec2_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <15000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec2_dr_sw: endpoint {
+						remote-endpoint = <&usb2_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	pcf2131: rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&pcal6524>;
+		status = "okay";
+	};
+};
+
+&lpuart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpuart5 {
+	pinctrl-0 = <&pinctrl_uart5>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	usb-role-switch;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usbotg2 {
+	adp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	usb-role-switch;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	status = "okay";
+
+	port {
+		usb2_drd_sw: endpoint {
+			remote-endpoint = <&typec2_dr_sw>;
+		};
+	};
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX91_PAD_ENET1_MDC__ENET1_MDC                           0x57e
+			MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO                      0x57e
+			MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0                  0x57e
+			MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1                  0x57e
+			MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2                  0x57e
+			MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3                  0x57e
+			MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC                  0x5fe
+			MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL            0x57e
+			MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0                  0x57e
+			MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1                     0x57e
+			MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2                  0x57e
+			MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3                  0x57e
+			MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK  0x5fe
+			MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL            0x57e
+		>;
+	};
+
+	pinctrl_eqos_sleep: eqossleepgrp {
+		fsl,pins = <
+			MX91_PAD_ENET1_MDC__GPIO4_IO0                           0x31e
+			MX91_PAD_ENET1_MDIO__GPIO4_IO1                          0x31e
+			MX91_PAD_ENET1_RD0__GPIO4_IO10                          0x31e
+			MX91_PAD_ENET1_RD1__GPIO4_IO11                          0x31e
+			MX91_PAD_ENET1_RD2__GPIO4_IO12                          0x31e
+			MX91_PAD_ENET1_RD3__GPIO4_IO13                          0x31e
+			MX91_PAD_ENET1_RXC__GPIO4_IO9                           0x31e
+			MX91_PAD_ENET1_RX_CTL__GPIO4_IO8                        0x31e
+			MX91_PAD_ENET1_TD0__GPIO4_IO5                           0x31e
+			MX91_PAD_ENET1_TD1__GPIO4_IO4                           0x31e
+			MX91_PAD_ENET1_TD2__GPIO4_IO3                           0x31e
+			MX91_PAD_ENET1_TD3__GPIO4_IO2                           0x31e
+			MX91_PAD_ENET1_TXC__GPIO4_IO7                           0x31e
+			MX91_PAD_ENET1_TX_CTL__GPIO4_IO6                        0x31e
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_MDC__ENET2_MDC                           0x57e
+			MX91_PAD_ENET2_MDIO__ENET2_MDIO                         0x57e
+			MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0                     0x57e
+			MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1                     0x57e
+			MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2                     0x57e
+			MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3                     0x57e
+			MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC                     0x5fe
+			MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL               0x57e
+			MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0                     0x57e
+			MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1                     0x57e
+			MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2                     0x57e
+			MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3                     0x57e
+			MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC                     0x5fe
+			MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL               0x57e
+		>;
+	};
+
+	pinctrl_fec_sleep: fecsleepgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_MDC__GPIO4_IO14                          0x51e
+			MX91_PAD_ENET2_MDIO__GPIO4_IO15                         0x51e
+			MX91_PAD_ENET2_RD0__GPIO4_IO24                          0x51e
+			MX91_PAD_ENET2_RD1__GPIO4_IO25                          0x51e
+			MX91_PAD_ENET2_RD2__GPIO4_IO26                          0x51e
+			MX91_PAD_ENET2_RD3__GPIO4_IO27                          0x51e
+			MX91_PAD_ENET2_RXC__GPIO4_IO23                          0x51e
+			MX91_PAD_ENET2_RX_CTL__GPIO4_IO22                       0x51e
+			MX91_PAD_ENET2_TD0__GPIO4_IO19                          0x51e
+			MX91_PAD_ENET2_TD1__GPIO4_IO18                          0x51e
+			MX91_PAD_ENET2_TD2__GPIO4_IO17                          0x51e
+			MX91_PAD_ENET2_TD3__GPIO4_IO16                          0x51e
+			MX91_PAD_ENET2_TXC__GPIO4_IO21                          0x51e
+			MX91_PAD_ENET2_TX_CTL__GPIO4_IO20                       0x51e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX91_PAD_I2C1_SCL__LPI2C1_SCL                           0x40000b9e
+			MX91_PAD_I2C1_SDA__LPI2C1_SDA                           0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX91_PAD_I2C2_SCL__LPI2C2_SCL                           0x40000b9e
+			MX91_PAD_I2C2_SDA__LPI2C2_SDA                           0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX91_PAD_GPIO_IO28__LPI2C3_SDA                          0x40000b9e
+			MX91_PAD_GPIO_IO29__LPI2C3_SCL                          0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX91_PAD_CCM_CLKO2__GPIO3_IO27                          0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_RESET_B__GPIO3_IO7                         0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX91_PAD_UART1_RXD__LPUART1_RX                          0x31e
+			MX91_PAD_UART1_TXD__LPUART1_TX                          0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX                   0x31e
+			MX91_PAD_DAP_TDI__LPUART5_RX                            0x31e
+			MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B                   0x31e
+			MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B                  0x31e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x158e
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x138e
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x138e
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x138e
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x138e
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x138e
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x138e
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x138e
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x138e
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x138e
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x15fe
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x13fe
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x13fe
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x13fe
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x13fe
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x13fe
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x13fe
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x13fe
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x13fe
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x13fe
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x15fe
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x1582
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x1382
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x1382
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x1382
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x1382
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x1382
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x1382
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x1382
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x1382
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x1382
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x1582
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x158e
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x138e
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x138e
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x138e
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x138e
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x138e
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x15fe
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x13fe
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x13fe
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x13fe
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x13fe
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x13fe
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CD_B__GPIO3_IO0                            0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CD_B__GPIO3_IO0                            0x51e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x1582
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x1382
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x1382
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x1382
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x1382
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x1382
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2sleepgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__GPIO3_IO1                             0x51e
+			MX91_PAD_SD2_CMD__GPIO3_IO2                             0x51e
+			MX91_PAD_SD2_DATA0__GPIO3_IO3                           0x51e
+			MX91_PAD_SD2_DATA1__GPIO3_IO4                           0x51e
+			MX91_PAD_SD2_DATA2__GPIO3_IO5                           0x51e
+			MX91_PAD_SD2_DATA3__GPIO3_IO6                           0x51e
+			MX91_PAD_SD2_VSELECT__GPIO3_IO19                        0x51e
+		>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91-pinfunc.h b/arch/arm64/boot/dts/freescale/imx91-pinfunc.h
new file mode 100644
index 000000000000..3e19945f5ce3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-pinfunc.h
@@ -0,0 +1,770 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2025 NXP
+ */
+
+#ifndef __DTS_IMX91_PINFUNC_H
+#define __DTS_IMX91_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX91_PAD_DAP_TDI__JTAG_MUX_TDI                                           0x0000 0x01b0 0x03d8 0x00 0x00
+#define MX91_PAD_DAP_TDI__MQS2_LEFT                                              0x0000 0x01b0 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDI__CAN2_TX                                                0x0000 0x01b0 0x0000 0x03 0x00
+#define MX91_PAD_DAP_TDI__FLEXIO2_FLEXIO30                                       0x0000 0x01b0 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDI__GPIO3_IO28                                             0x0000 0x01b0 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDI__LPUART5_RX                                             0x0000 0x01b0 0x0488 0x06 0x00
+
+#define MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS                                     0x0004 0x01b4 0x03dc 0x00 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31                                 0x0004 0x01b4 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__GPIO3_IO29                                       0x0004 0x01b4 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B                                    0x0004 0x01b4 0x0000 0x06 0x00
+
+#define MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK                                    0x0008 0x01b8 0x03d4 0x00 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30                                0x0008 0x01b8 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__GPIO3_IO30                                      0x0008 0x01b8 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B                                   0x0008 0x01b8 0x0484 0x06 0x00
+
+#define MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO                                  0x000c 0x01bc 0x0000 0x00 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT                                    0x000c 0x01bc 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__CAN2_RX                                       0x000c 0x01bc 0x0364 0x03 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31                              0x000c 0x01bc 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__GPIO3_IO31                                    0x000c 0x01bc 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX                                    0x000c 0x01bc 0x048c 0x06 0x00
+
+#define MX91_PAD_GPIO_IO00__GPIO2_IO0                                            0x0010 0x01c0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO00__LPI2C3_SDA                                           0x0010 0x01c0 0x03f4 0x01 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK                                     0x0010 0x01c0 0x04bc 0x02 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK                                    0x0010 0x01c0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO00__LPSPI6_PCS0                                          0x0010 0x01c0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO00__LPUART5_TX                                           0x0010 0x01c0 0x048c 0x05 0x01
+#define MX91_PAD_GPIO_IO00__LPI2C5_SDA                                           0x0010 0x01c0 0x0404 0x06 0x00
+#define MX91_PAD_GPIO_IO00__FLEXIO1_FLEXIO0                                      0x0010 0x01c0 0x036c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO01__GPIO2_IO1                                            0x0014 0x01c4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO01__LPI2C3_SCL                                           0x0014 0x01c4 0x03f0 0x01 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA0                                   0x0014 0x01c4 0x0490 0x02 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE                                     0x0014 0x01c4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO01__LPSPI6_SIN                                           0x0014 0x01c4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO01__LPUART5_RX                                           0x0014 0x01c4 0x0488 0x05 0x01
+#define MX91_PAD_GPIO_IO01__LPI2C5_SCL                                           0x0014 0x01c4 0x0400 0x06 0x00
+#define MX91_PAD_GPIO_IO01__FLEXIO1_FLEXIO1                                      0x0014 0x01c4 0x0370 0x07 0x00
+
+#define MX91_PAD_GPIO_IO02__GPIO2_IO2                                            0x0018 0x01c8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO02__LPI2C4_SDA                                           0x0018 0x01c8 0x03fc 0x01 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC                                   0x0018 0x01c8 0x04c0 0x02 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC                                  0x0018 0x01c8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO02__LPSPI6_SOUT                                          0x0018 0x01c8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO02__LPUART5_CTS_B                                        0x0018 0x01c8 0x0484 0x05 0x01
+#define MX91_PAD_GPIO_IO02__LPI2C6_SDA                                           0x0018 0x01c8 0x040c 0x06 0x00
+#define MX91_PAD_GPIO_IO02__FLEXIO1_FLEXIO2                                      0x0018 0x01c8 0x0374 0x07 0x00
+
+#define MX91_PAD_GPIO_IO03__GPIO2_IO3                                            0x001c 0x01cc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C4_SCL                                           0x001c 0x01cc 0x03f8 0x01 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC                                   0x001c 0x01cc 0x04b8 0x02 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC                                  0x001c 0x01cc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO03__LPSPI6_SCK                                           0x001c 0x01cc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO03__LPUART5_RTS_B                                        0x001c 0x01cc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C6_SCL                                           0x001c 0x01cc 0x0408 0x06 0x00
+#define MX91_PAD_GPIO_IO03__FLEXIO1_FLEXIO3                                      0x001c 0x01cc 0x0378 0x07 0x00
+
+#define MX91_PAD_GPIO_IO04__GPIO2_IO4                                            0x0020 0x01d0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO04__TPM3_CH0                                             0x0020 0x01d0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO04__PDM_CLK                                              0x0020 0x01d0 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0                                  0x0020 0x01d0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO04__LPSPI7_PCS0                                          0x0020 0x01d0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO04__LPUART6_TX                                           0x0020 0x01d0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO04__LPI2C6_SDA                                           0x0020 0x01d0 0x040c 0x06 0x01
+#define MX91_PAD_GPIO_IO04__FLEXIO1_FLEXIO4                                      0x0020 0x01d0 0x037c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO05__GPIO2_IO5                                            0x0024 0x01d4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO05__TPM4_CH0                                             0x0024 0x01d4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO05__PDM_BIT_STREAM0                                      0x0024 0x01d4 0x04c4 0x02 0x00
+#define MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1                                  0x0024 0x01d4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO05__LPSPI7_SIN                                           0x0024 0x01d4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO05__LPUART6_RX                                           0x0024 0x01d4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO05__LPI2C6_SCL                                           0x0024 0x01d4 0x0408 0x06 0x01
+#define MX91_PAD_GPIO_IO05__FLEXIO1_FLEXIO5                                      0x0024 0x01d4 0x0380 0x07 0x00
+
+#define MX91_PAD_GPIO_IO06__GPIO2_IO6                                            0x0028 0x01d8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO06__TPM5_CH0                                             0x0028 0x01d8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO06__PDM_BIT_STREAM1                                      0x0028 0x01d8 0x04c8 0x02 0x00
+#define MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2                                  0x0028 0x01d8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO06__LPSPI7_SOUT                                          0x0028 0x01d8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO06__LPUART6_CTS_B                                        0x0028 0x01d8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO06__LPI2C7_SDA                                           0x0028 0x01d8 0x0414 0x06 0x00
+#define MX91_PAD_GPIO_IO06__FLEXIO1_FLEXIO6                                      0x0028 0x01d8 0x0384 0x07 0x00
+
+#define MX91_PAD_GPIO_IO07__GPIO2_IO7                                            0x002c 0x01dc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI3_PCS1                                          0x002c 0x01dc 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA1                                   0x002c 0x01dc 0x0494 0x02 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3                                  0x002c 0x01dc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI7_SCK                                           0x002c 0x01dc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO07__LPUART6_RTS_B                                        0x002c 0x01dc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO07__LPI2C7_SCL                                           0x002c 0x01dc 0x0410 0x06 0x00
+#define MX91_PAD_GPIO_IO07__FLEXIO1_FLEXIO7                                      0x002c 0x01dc 0x0388 0x07 0x00
+
+#define MX91_PAD_GPIO_IO08__GPIO2_IO8                                            0x0030 0x01e0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO08__LPSPI3_PCS0                                          0x0030 0x01e0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA2                                   0x0030 0x01e0 0x0498 0x02 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4                                  0x0030 0x01e0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO08__TPM6_CH0                                             0x0030 0x01e0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO08__LPUART7_TX                                           0x0030 0x01e0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO08__LPI2C7_SDA                                           0x0030 0x01e0 0x0414 0x06 0x01
+#define MX91_PAD_GPIO_IO08__FLEXIO1_FLEXIO8                                      0x0030 0x01e0 0x038c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO09__GPIO2_IO9                                            0x0034 0x01e4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO09__LPSPI3_SIN                                           0x0034 0x01e4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA3                                   0x0034 0x01e4 0x049c 0x02 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5                                  0x0034 0x01e4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO09__TPM3_EXTCLK                                          0x0034 0x01e4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO09__LPUART7_RX                                           0x0034 0x01e4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO09__LPI2C7_SCL                                           0x0034 0x01e4 0x0410 0x06 0x01
+#define MX91_PAD_GPIO_IO09__FLEXIO1_FLEXIO9                                      0x0034 0x01e4 0x0390 0x07 0x00
+
+#define MX91_PAD_GPIO_IO10__GPIO2_IO10                                           0x0038 0x01e8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO10__LPSPI3_SOUT                                          0x0038 0x01e8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA4                                   0x0038 0x01e8 0x04a0 0x02 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6                                  0x0038 0x01e8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO10__TPM4_EXTCLK                                          0x0038 0x01e8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO10__LPUART7_CTS_B                                        0x0038 0x01e8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO10__LPI2C8_SDA                                           0x0038 0x01e8 0x041c 0x06 0x00
+#define MX91_PAD_GPIO_IO10__FLEXIO1_FLEXIO10                                     0x0038 0x01e8 0x0394 0x07 0x00
+
+#define MX91_PAD_GPIO_IO11__GPIO2_IO11                                           0x003c 0x01ec 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO11__LPSPI3_SCK                                           0x003c 0x01ec 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA5                                   0x003c 0x01ec 0x04a4 0x02 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7                                  0x003c 0x01ec 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO11__TPM5_EXTCLK                                          0x003c 0x01ec 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO11__LPUART7_RTS_B                                        0x003c 0x01ec 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO11__LPI2C8_SCL                                           0x003c 0x01ec 0x0418 0x06 0x00
+#define MX91_PAD_GPIO_IO11__FLEXIO1_FLEXIO11                                     0x003c 0x01ec 0x0398 0x07 0x00
+
+#define MX91_PAD_GPIO_IO12__GPIO2_IO12                                           0x0040 0x01f0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO12__TPM3_CH2                                             0x0040 0x01f0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO12__PDM_BIT_STREAM2                                      0x0040 0x01f0 0x04cc 0x02 0x00
+#define MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8                                  0x0040 0x01f0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO12__LPSPI8_PCS0                                          0x0040 0x01f0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO12__LPUART8_TX                                           0x0040 0x01f0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO12__LPI2C8_SDA                                           0x0040 0x01f0 0x041c 0x06 0x01
+#define MX91_PAD_GPIO_IO12__SAI3_RX_SYNC                                         0x0040 0x01f0 0x04dc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO13__GPIO2_IO13                                           0x0044 0x01f4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO13__TPM4_CH2                                             0x0044 0x01f4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO13__PDM_BIT_STREAM3                                      0x0044 0x01f4 0x04d0 0x02 0x00
+#define MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9                                  0x0044 0x01f4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO13__LPSPI8_SIN                                           0x0044 0x01f4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO13__LPUART8_RX                                           0x0044 0x01f4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO13__LPI2C8_SCL                                           0x0044 0x01f4 0x0418 0x06 0x01
+#define MX91_PAD_GPIO_IO13__FLEXIO1_FLEXIO13                                     0x0044 0x01f4 0x039c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO14__GPIO2_IO14                                           0x0048 0x01f8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO14__LPUART3_TX                                           0x0048 0x01f8 0x0474 0x01 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA6                                   0x0048 0x01f8 0x04a8 0x02 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10                                 0x0048 0x01f8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO14__LPSPI8_SOUT                                          0x0048 0x01f8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO14__LPUART8_CTS_B                                        0x0048 0x01f8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO14__LPUART4_TX                                           0x0048 0x01f8 0x0480 0x06 0x00
+#define MX91_PAD_GPIO_IO14__FLEXIO1_FLEXIO14                                     0x0048 0x01f8 0x03a0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO15__GPIO2_IO15                                           0x004c 0x01fc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO15__LPUART3_RX                                           0x004c 0x01fc 0x0470 0x01 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA7                                   0x004c 0x01fc 0x04ac 0x02 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11                                 0x004c 0x01fc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO15__LPSPI8_SCK                                           0x004c 0x01fc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO15__LPUART8_RTS_B                                        0x004c 0x01fc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO15__LPUART4_RX                                           0x004c 0x01fc 0x047c 0x06 0x00
+#define MX91_PAD_GPIO_IO15__FLEXIO1_FLEXIO15                                     0x004c 0x01fc 0x03a4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO16__GPIO2_IO16                                           0x0050 0x0200 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO16__SAI3_TX_BCLK                                         0x0050 0x0200 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO16__PDM_BIT_STREAM2                                      0x0050 0x0200 0x04cc 0x02 0x01
+#define MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12                                 0x0050 0x0200 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO16__LPUART3_CTS_B                                        0x0050 0x0200 0x046c 0x04 0x00
+#define MX91_PAD_GPIO_IO16__LPSPI4_PCS2                                          0x0050 0x0200 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO16__LPUART4_CTS_B                                        0x0050 0x0200 0x0478 0x06 0x00
+#define MX91_PAD_GPIO_IO16__FLEXIO1_FLEXIO16                                     0x0050 0x0200 0x03a8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO17__GPIO2_IO17                                           0x0054 0x0204 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO17__SAI3_MCLK                                            0x0054 0x0204 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA8                                   0x0054 0x0204 0x04b0 0x02 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13                                 0x0054 0x0204 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO17__LPUART3_RTS_B                                        0x0054 0x0204 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO17__LPSPI4_PCS1                                          0x0054 0x0204 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO17__LPUART4_RTS_B                                        0x0054 0x0204 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO17__FLEXIO1_FLEXIO17                                     0x0054 0x0204 0x03ac 0x07 0x00
+
+#define MX91_PAD_GPIO_IO18__GPIO2_IO18                                           0x0058 0x0208 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO18__SAI3_RX_BCLK                                         0x0058 0x0208 0x04d8 0x01 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA9                                   0x0058 0x0208 0x04b4 0x02 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14                                 0x0058 0x0208 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI5_PCS0                                          0x0058 0x0208 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI4_PCS0                                          0x0058 0x0208 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO18__TPM5_CH2                                             0x0058 0x0208 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO18__FLEXIO1_FLEXIO18                                     0x0058 0x0208 0x03b0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO19__GPIO2_IO19                                           0x005c 0x020c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_RX_SYNC                                         0x005c 0x020c 0x04dc 0x01 0x01
+#define MX91_PAD_GPIO_IO19__PDM_BIT_STREAM3                                      0x005c 0x020c 0x04d0 0x02 0x01
+#define MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15                                 0x005c 0x020c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI5_SIN                                           0x005c 0x020c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI4_SIN                                           0x005c 0x020c 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO19__TPM6_CH2                                             0x005c 0x020c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_TX_DATA0                                        0x005c 0x020c 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO20__GPIO2_IO20                                           0x0060 0x0210 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO20__SAI3_RX_DATA0                                        0x0060 0x0210 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO20__PDM_BIT_STREAM0                                      0x0060 0x0210 0x04c4 0x02 0x01
+#define MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16                                 0x0060 0x0210 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI5_SOUT                                          0x0060 0x0210 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI4_SOUT                                          0x0060 0x0210 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO20__TPM3_CH1                                             0x0060 0x0210 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO20__FLEXIO1_FLEXIO20                                     0x0060 0x0210 0x03b4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO21__GPIO2_IO21                                           0x0064 0x0214 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_TX_DATA0                                        0x0064 0x0214 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO21__PDM_CLK                                              0x0064 0x0214 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17                                 0x0064 0x0214 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI5_SCK                                           0x0064 0x0214 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI4_SCK                                           0x0064 0x0214 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO21__TPM4_CH1                                             0x0064 0x0214 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_RX_BCLK                                         0x0064 0x0214 0x04d8 0x07 0x01
+
+#define MX91_PAD_GPIO_IO22__GPIO2_IO22                                           0x0068 0x0218 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO22__USDHC3_CLK                                           0x0068 0x0218 0x04e8 0x01 0x00
+#define MX91_PAD_GPIO_IO22__SPDIF_IN                                             0x0068 0x0218 0x04e4 0x02 0x00
+#define MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18                                 0x0068 0x0218 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO22__TPM5_CH1                                             0x0068 0x0218 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO22__TPM6_EXTCLK                                          0x0068 0x0218 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO22__LPI2C5_SDA                                           0x0068 0x0218 0x0404 0x06 0x01
+#define MX91_PAD_GPIO_IO22__FLEXIO1_FLEXIO22                                     0x0068 0x0218 0x03b8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO23__GPIO2_IO23                                           0x006c 0x021c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO23__USDHC3_CMD                                           0x006c 0x021c 0x04ec 0x01 0x00
+#define MX91_PAD_GPIO_IO23__SPDIF_OUT                                            0x006c 0x021c 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19                                 0x006c 0x021c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO23__TPM6_CH1                                             0x006c 0x021c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO23__LPI2C5_SCL                                           0x006c 0x021c 0x0400 0x06 0x01
+#define MX91_PAD_GPIO_IO23__FLEXIO1_FLEXIO23                                     0x006c 0x021c 0x03bc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO24__GPIO2_IO24                                           0x0070 0x0220 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO24__USDHC3_DATA0                                         0x0070 0x0220 0x04f0 0x01 0x00
+#define MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20                                 0x0070 0x0220 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO24__TPM3_CH3                                             0x0070 0x0220 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO24__JTAG_MUX_TDO                                         0x0070 0x0220 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO24__LPSPI6_PCS1                                          0x0070 0x0220 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO24__FLEXIO1_FLEXIO24                                     0x0070 0x0220 0x03c0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO25__GPIO2_IO25                                           0x0074 0x0224 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO25__USDHC3_DATA1                                         0x0074 0x0224 0x04f4 0x01 0x00
+#define MX91_PAD_GPIO_IO25__CAN2_TX                                              0x0074 0x0224 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21                                 0x0074 0x0224 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO25__TPM4_CH3                                             0x0074 0x0224 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO25__JTAG_MUX_TCK                                         0x0074 0x0224 0x03d4 0x05 0x01
+#define MX91_PAD_GPIO_IO25__LPSPI7_PCS1                                          0x0074 0x0224 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO25__FLEXIO1_FLEXIO25                                     0x0074 0x0224 0x03c4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO26__GPIO2_IO26                                           0x0078 0x0228 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO26__USDHC3_DATA2                                         0x0078 0x0228 0x04f8 0x01 0x00
+#define MX91_PAD_GPIO_IO26__PDM_BIT_STREAM1                                      0x0078 0x0228 0x04c8 0x02 0x01
+#define MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22                                 0x0078 0x0228 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO26__TPM5_CH3                                             0x0078 0x0228 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO26__JTAG_MUX_TDI                                         0x0078 0x0228 0x03d8 0x05 0x01
+#define MX91_PAD_GPIO_IO26__LPSPI8_PCS1                                          0x0078 0x0228 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO26__SAI3_TX_SYNC                                         0x0078 0x0228 0x04e0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO27__GPIO2_IO27                                           0x007c 0x022c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO27__USDHC3_DATA3                                         0x007c 0x022c 0x04fc 0x01 0x00
+#define MX91_PAD_GPIO_IO27__CAN2_RX                                              0x007c 0x022c 0x0364 0x02 0x01
+#define MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23                                 0x007c 0x022c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO27__TPM6_CH3                                             0x007c 0x022c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO27__JTAG_MUX_TMS                                         0x007c 0x022c 0x03dc 0x05 0x01
+#define MX91_PAD_GPIO_IO27__LPSPI5_PCS1                                          0x007c 0x022c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO27__FLEXIO1_FLEXIO27                                     0x007c 0x022c 0x03c8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO28__GPIO2_IO28                                           0x0080 0x0230 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO28__LPI2C3_SDA                                           0x0080 0x0230 0x03f4 0x01 0x01
+#define MX91_PAD_GPIO_IO28__CAN1_TX                                              0x0080 0x0230 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO28__FLEXIO1_FLEXIO28                                     0x0080 0x0230 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO29__GPIO2_IO29                                           0x0084 0x0234 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO29__LPI2C3_SCL                                           0x0084 0x0234 0x03f0 0x01 0x01
+#define MX91_PAD_GPIO_IO29__CAN1_RX                                              0x0084 0x0234 0x0360 0x02 0x00
+#define MX91_PAD_GPIO_IO29__FLEXIO1_FLEXIO29                                     0x0084 0x0234 0x0000 0x07 0x00
+
+#define MX91_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1                                   0x0088 0x0238 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26                                     0x0088 0x0238 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO1__GPIO3_IO26                                           0x0088 0x0238 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO2__GPIO3_IO27                                           0x008c 0x023c 0x0000 0x05 0x00
+#define MX91_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2                                   0x008c 0x023c 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27                                     0x008c 0x023c 0x03c8 0x04 0x01
+
+#define MX91_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3                                   0x0090 0x0240 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28                                     0x0090 0x0240 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO3__GPIO4_IO28                                           0x0090 0x0240 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4                                   0x0094 0x0244 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29                                     0x0094 0x0244 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO4__GPIO4_IO29                                           0x0094 0x0244 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_MDC__ENET1_MDC                                            0x0098 0x0248 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDC__LPUART3_DCB_B                                        0x0098 0x0248 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDC__I3C2_SCL                                             0x0098 0x0248 0x03cc 0x02 0x00
+#define MX91_PAD_ENET1_MDC__HSIOMIX_OTG_ID1                                      0x0098 0x0248 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDC__FLEXIO2_FLEXIO0                                      0x0098 0x0248 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDC__GPIO4_IO0                                            0x0098 0x0248 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDC__LPI2C1_SCL                                           0x0098 0x0248 0x03e0 0x06 0x00
+
+#define MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO                                       0x009c 0x024c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDIO__LPUART3_RIN_B                                       0x009c 0x024c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDIO__I3C2_SDA                                            0x009c 0x024c 0x03d0 0x02 0x00
+#define MX91_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1                                    0x009c 0x024c 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDIO__FLEXIO2_FLEXIO1                                     0x009c 0x024c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDIO__GPIO4_IO1                                           0x009c 0x024c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDIO__LPI2C1_SDA                                          0x009c 0x024c 0x03e4 0x06 0x00
+
+#define MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3                                   0x00a0 0x0250 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD3__CAN2_TX                                              0x00a0 0x0250 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD3__HSIOMIX_OTG_ID2                                      0x00a0 0x0250 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD3__FLEXIO2_FLEXIO2                                      0x00a0 0x0250 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD3__GPIO4_IO2                                            0x00a0 0x0250 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD3__LPI2C2_SCL                                           0x00a0 0x0250 0x03e8 0x06 0x00
+
+#define MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2                                   0x00a4 0x0254 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD2__ENET_QOS_CLOCK_GENERATE_CLK                          0x00a4 0x0254 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD2__CAN2_RX                                              0x00a4 0x0254 0x0364 0x02 0x02
+#define MX91_PAD_ENET1_TD2__HSIOMIX_OTG_OC2                                      0x00a4 0x0254 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD2__FLEXIO2_FLEXIO3                                      0x00a4 0x0254 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD2__GPIO4_IO3                                            0x00a4 0x0254 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD2__LPI2C2_SDA                                           0x00a4 0x0254 0x03ec 0x06 0x00
+
+#define MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1                                      0x00a8 0x0258 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD1__LPUART3_RTS_B                                        0x00a8 0x0258 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR                                             0x00a8 0x0258 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD1__HSIOMIX_OTG_OC1                                      0x00a8 0x0258 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD1__FLEXIO2_FLEXIO4                                      0x00a8 0x0258 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD1__GPIO4_IO4                                            0x00a8 0x0258 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR_B                                           0x00a8 0x0258 0x0000 0x06 0x00
+
+#define MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0                                   0x00ac 0x025c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD0__LPUART3_TX                                           0x00ac 0x025c 0x0474 0x01 0x01
+#define MX91_PAD_ENET1_TD0__FLEXIO2_FLEXIO5                                      0x00ac 0x025c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD0__GPIO4_IO5                                            0x00ac 0x025c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL                             0x00b0 0x0260 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPUART3_DTR_B                                     0x00b0 0x0260 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO6                                   0x00b0 0x0260 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TX_CTL__GPIO4_IO6                                         0x00b0 0x0260 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPSPI2_SCK                                        0x00b0 0x0260 0x043c 0x02 0x00
+
+#define MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK                   0x00b4 0x0264 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TXC__ENET_QOS_TX_ER                                       0x00b4 0x0264 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TXC__FLEXIO2_FLEXIO7                                      0x00b4 0x0264 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TXC__GPIO4_IO7                                            0x00b4 0x0264 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TXC__LPSPI2_SIN                                           0x00b4 0x0264 0x0440 0x02 0x00
+
+#define MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL                             0x00b8 0x0268 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPUART3_DSR_B                                     0x00b8 0x0268 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2                                  0x00b8 0x0268 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO8                                   0x00b8 0x0268 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RX_CTL__GPIO4_IO8                                         0x00b8 0x0268 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPSPI2_PCS0                                       0x00b8 0x0268 0x0434 0x02 0x00
+
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC                                   0x00bc 0x026c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RX_ER                                       0x00bc 0x026c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RXC__FLEXIO2_FLEXIO9                                      0x00bc 0x026c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RXC__GPIO4_IO9                                            0x00bc 0x026c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RXC__LPSPI2_SOUT                                          0x00bc 0x026c 0x0444 0x02 0x00
+
+#define MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0                                   0x00c0 0x0270 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD0__LPUART3_RX                                           0x00c0 0x0270 0x0470 0x01 0x01
+#define MX91_PAD_ENET1_RD0__FLEXIO2_FLEXIO10                                     0x00c0 0x0270 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD0__GPIO4_IO10                                           0x00c0 0x0270 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1                                   0x00c4 0x0274 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD1__LPUART3_CTS_B                                        0x00c4 0x0274 0x046c 0x01 0x01
+#define MX91_PAD_ENET1_RD1__LPTMR2_ALT1                                          0x00c4 0x0274 0x0448 0x03 0x00
+#define MX91_PAD_ENET1_RD1__FLEXIO2_FLEXIO11                                     0x00c4 0x0274 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD1__GPIO4_IO11                                           0x00c4 0x0274 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2                                   0x00c8 0x0278 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD2__LPTMR2_ALT2                                          0x00c8 0x0278 0x044c 0x03 0x00
+#define MX91_PAD_ENET1_RD2__FLEXIO2_FLEXIO12                                     0x00c8 0x0278 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD2__GPIO4_IO12                                           0x00c8 0x0278 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3                                   0x00cc 0x027c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER                              0x00cc 0x027c 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_RD3__LPTMR2_ALT3                                          0x00cc 0x027c 0x0450 0x03 0x00
+#define MX91_PAD_ENET1_RD3__FLEXIO2_FLEXIO13                                     0x00cc 0x027c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD3__GPIO4_IO13                                           0x00cc 0x027c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET2_MDC__ENET2_MDC                                            0x00d0 0x0280 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDC__LPUART4_DCB_B                                        0x00d0 0x0280 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDC__SAI2_RX_SYNC                                         0x00d0 0x0280 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDC__FLEXIO2_FLEXIO14                                     0x00d0 0x0280 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDC__GPIO4_IO14                                           0x00d0 0x0280 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDC__MEDIAMIX_CAM_CLK                                     0x00d0 0x0280 0x04bc 0x06 0x01
+
+#define MX91_PAD_ENET2_MDIO__ENET2_MDIO                                          0x00d4 0x0284 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDIO__LPUART4_RIN_B                                       0x00d4 0x0284 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDIO__SAI2_RX_BCLK                                        0x00d4 0x0284 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15                                    0x00d4 0x0284 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDIO__GPIO4_IO15                                          0x00d4 0x0284 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDIO__MEDIAMIX_CAM_DATA0                                  0x00d4 0x0284 0x0490 0x06 0x01
+
+#define MX91_PAD_ENET2_TD3__SAI2_RX_DATA0                                        0x00d8 0x0288 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TD3__FLEXIO2_FLEXIO16                                     0x00d8 0x0288 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD3__GPIO4_IO16                                           0x00d8 0x0288 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD3__MEDIAMIX_CAM_VSYNC                                   0x00d8 0x0288 0x04c0 0x06 0x01
+#define MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3                                      0x00d8 0x0288 0x0000 0x00 0x00
+
+#define MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2                                      0x00dc 0x028c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD2__ENET2_TX_CLK2                                        0x00dc 0x028c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD2__FLEXIO2_FLEXIO17                                     0x00dc 0x028c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD2__GPIO4_IO17                                           0x00dc 0x028c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD2__MEDIAMIX_CAM_HSYNC                                   0x00dc 0x028c 0x04b8 0x06 0x01
+
+#define MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1                                      0x00e0 0x0290 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD1__LPUART4_RTS_B                                        0x00e0 0x0290 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD1__FLEXIO2_FLEXIO18                                     0x00e0 0x0290 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD1__GPIO4_IO18                                           0x00e0 0x0290 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD1__MEDIAMIX_CAM_DATA1                                   0x00e0 0x0290 0x0494 0x06 0x01
+
+#define MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0                                      0x00e4 0x0294 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD0__LPUART4_TX                                           0x00e4 0x0294 0x0480 0x01 0x01
+#define MX91_PAD_ENET2_TD0__FLEXIO2_FLEXIO19                                     0x00e4 0x0294 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD0__GPIO4_IO19                                           0x00e4 0x0294 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD0__MEDIAMIX_CAM_DATA2                                   0x00e4 0x0294 0x0498 0x06 0x01
+
+#define MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL                                0x00e8 0x0298 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TX_CTL__LPUART4_DTR_B                                     0x00e8 0x0298 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TX_CTL__SAI2_TX_SYNC                                      0x00e8 0x0298 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20                                  0x00e8 0x0298 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TX_CTL__GPIO4_IO20                                        0x00e8 0x0298 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TX_CTL__MEDIAMIX_CAM_DATA3                                0x00e8 0x0298 0x049c 0x06 0x01
+
+#define MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC                                      0x00ec 0x029c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TXC__ENET2_TX_ER                                          0x00ec 0x029c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TXC__SAI2_TX_BCLK                                         0x00ec 0x029c 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TXC__FLEXIO2_FLEXIO21                                     0x00ec 0x029c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TXC__GPIO4_IO21                                           0x00ec 0x029c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TXC__MEDIAMIX_CAM_DATA4                                   0x00ec 0x029c 0x04a0 0x06 0x01
+
+#define MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL                                0x00f0 0x02a0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RX_CTL__LPUART4_DSR_B                                     0x00f0 0x02a0 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RX_CTL__SAI2_TX_DATA0                                     0x00f0 0x02a0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22                                  0x00f0 0x02a0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RX_CTL__GPIO4_IO22                                        0x00f0 0x02a0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RX_CTL__MEDIAMIX_CAM_DATA5                                0x00f0 0x02a0 0x04a4 0x06 0x01
+
+#define MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC                                      0x00f4 0x02a4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RXC__ENET2_RX_ER                                          0x00f4 0x02a4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RXC__FLEXIO2_FLEXIO23                                     0x00f4 0x02a4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RXC__GPIO4_IO23                                           0x00f4 0x02a4 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RXC__MEDIAMIX_CAM_DATA6                                   0x00f4 0x02a4 0x04a8 0x06 0x01
+
+#define MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0                                      0x00f8 0x02a8 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD0__LPUART4_RX                                           0x00f8 0x02a8 0x047c 0x01 0x01
+#define MX91_PAD_ENET2_RD0__FLEXIO2_FLEXIO24                                     0x00f8 0x02a8 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD0__GPIO4_IO24                                           0x00f8 0x02a8 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD0__MEDIAMIX_CAM_DATA7                                   0x00f8 0x02a8 0x04ac 0x06 0x01
+
+#define MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1                                      0x00fc 0x02ac 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD1__SPDIF_IN                                             0x00fc 0x02ac 0x04e4 0x01 0x01
+#define MX91_PAD_ENET2_RD1__FLEXIO2_FLEXIO25                                     0x00fc 0x02ac 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD1__GPIO4_IO25                                           0x00fc 0x02ac 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD1__MEDIAMIX_CAM_DATA8                                   0x00fc 0x02ac 0x04b0 0x06 0x01
+
+#define MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2                                      0x0100 0x02b0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD2__LPUART4_CTS_B                                        0x0100 0x02b0 0x0478 0x01 0x01
+#define MX91_PAD_ENET2_RD2__SAI2_MCLK                                            0x0100 0x02b0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RD2__MQS2_RIGHT                                           0x0100 0x02b0 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD2__FLEXIO2_FLEXIO26                                     0x0100 0x02b0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD2__GPIO4_IO26                                           0x0100 0x02b0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD2__MEDIAMIX_CAM_DATA9                                   0x0100 0x02b0 0x04b4 0x06 0x01
+
+#define MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3                                      0x0104 0x02b4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_OUT                                            0x0104 0x02b4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_IN                                             0x0104 0x02b4 0x04e4 0x02 0x02
+#define MX91_PAD_ENET2_RD3__MQS2_LEFT                                            0x0104 0x02b4 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD3__FLEXIO2_FLEXIO27                                     0x0104 0x02b4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD3__GPIO4_IO27                                           0x0104 0x02b4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD1_CLK__FLEXIO1_FLEXIO8                                        0x0108 0x02b8 0x038c 0x04 0x01
+#define MX91_PAD_SD1_CLK__GPIO3_IO8                                              0x0108 0x02b8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CLK__USDHC1_CLK                                             0x0108 0x02b8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CLK__LPSPI2_SCK                                             0x0108 0x02b8 0x043c 0x03 0x01
+
+#define MX91_PAD_SD1_CMD__USDHC1_CMD                                             0x010c 0x02bc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CMD__FLEXIO1_FLEXIO9                                        0x010c 0x02bc 0x0390 0x04 0x01
+#define MX91_PAD_SD1_CMD__GPIO3_IO9                                              0x010c 0x02bc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CMD__LPSPI2_SIN                                             0x010c 0x02bc 0x0440 0x03 0x01
+
+#define MX91_PAD_SD1_DATA0__USDHC1_DATA0                                         0x0110 0x02c0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA0__FLEXIO1_FLEXIO10                                     0x0110 0x02c0 0x0394 0x04 0x01
+#define MX91_PAD_SD1_DATA0__GPIO3_IO10                                           0x0110 0x02c0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA0__LPSPI2_PCS0                                          0x0110 0x02c0 0x0434 0x03 0x01
+
+#define MX91_PAD_SD1_DATA1__USDHC1_DATA1                                         0x0114 0x02c4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA1__FLEXIO1_FLEXIO11                                     0x0114 0x02c4 0x0398 0x04 0x01
+#define MX91_PAD_SD1_DATA1__GPIO3_IO11                                           0x0114 0x02c4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT                                0x0114 0x02c4 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA1__LPSPI2_SOUT                                          0x0114 0x02c4 0x0444 0x03 0x01
+
+#define MX91_PAD_SD1_DATA2__USDHC1_DATA2                                         0x0118 0x02c8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA2__FLEXIO1_FLEXIO12                                     0x0118 0x02c8 0x0000 0x04 0x00
+#define MX91_PAD_SD1_DATA2__GPIO3_IO12                                           0x0118 0x02c8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY                              0x0118 0x02c8 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA2__LPSPI2_PCS1                                          0x0118 0x02c8 0x0438 0x03 0x00
+
+#define MX91_PAD_SD1_DATA3__USDHC1_DATA3                                         0x011c 0x02cc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B                                     0x011c 0x02cc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA3__FLEXIO1_FLEXIO13                                     0x011c 0x02cc 0x039c 0x04 0x01
+#define MX91_PAD_SD1_DATA3__GPIO3_IO13                                           0x011c 0x02cc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA3__LPSPI1_PCS1                                          0x011c 0x02cc 0x0424 0x03 0x00
+
+#define MX91_PAD_SD1_DATA4__USDHC1_DATA4                                         0x0120 0x02d0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA4__FLEXSPI1_A_DATA4                                     0x0120 0x02d0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA4__FLEXIO1_FLEXIO14                                     0x0120 0x02d0 0x03a0 0x04 0x01
+#define MX91_PAD_SD1_DATA4__GPIO3_IO14                                           0x0120 0x02d0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA4__LPSPI1_PCS0                                          0x0120 0x02d0 0x0420 0x03 0x00
+
+#define MX91_PAD_SD1_DATA5__USDHC1_DATA5                                         0x0124 0x02d4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA5__FLEXSPI1_A_DATA5                                     0x0124 0x02d4 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA5__USDHC1_RESET_B                                       0x0124 0x02d4 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA5__FLEXIO1_FLEXIO15                                     0x0124 0x02d4 0x03a4 0x04 0x01
+#define MX91_PAD_SD1_DATA5__GPIO3_IO15                                           0x0124 0x02d4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA5__LPSPI1_SIN                                           0x0124 0x02d4 0x042c 0x03 0x00
+
+#define MX91_PAD_SD1_DATA6__USDHC1_DATA6                                         0x0128 0x02d8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA6__FLEXSPI1_A_DATA6                                     0x0128 0x02d8 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA6__USDHC1_CD_B                                          0x0128 0x02d8 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA6__FLEXIO1_FLEXIO16                                     0x0128 0x02d8 0x03a8 0x04 0x01
+#define MX91_PAD_SD1_DATA6__GPIO3_IO16                                           0x0128 0x02d8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA6__LPSPI1_SCK                                           0x0128 0x02d8 0x0428 0x03 0x00
+
+#define MX91_PAD_SD1_DATA7__USDHC1_DATA7                                         0x012c 0x02dc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA7__FLEXSPI1_A_DATA7                                     0x012c 0x02dc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA7__USDHC1_WP                                            0x012c 0x02dc 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA7__FLEXIO1_FLEXIO17                                     0x012c 0x02dc 0x03ac 0x04 0x01
+#define MX91_PAD_SD1_DATA7__GPIO3_IO17                                           0x012c 0x02dc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA7__LPSPI1_SOUT                                          0x012c 0x02dc 0x0430 0x03 0x00
+
+#define MX91_PAD_SD1_STROBE__USDHC1_STROBE                                       0x0130 0x02e0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_STROBE__FLEXSPI1_A_DQS                                      0x0130 0x02e0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_STROBE__FLEXIO1_FLEXIO18                                    0x0130 0x02e0 0x03b0 0x04 0x01
+#define MX91_PAD_SD1_STROBE__GPIO3_IO18                                          0x0130 0x02e0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                                     0x0134 0x02e4 0x0000 0x00 0x00
+#define MX91_PAD_SD2_VSELECT__USDHC2_WP                                          0x0134 0x02e4 0x0000 0x01 0x00
+#define MX91_PAD_SD2_VSELECT__LPTMR2_ALT3                                        0x0134 0x02e4 0x0450 0x02 0x01
+#define MX91_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19                                   0x0134 0x02e4 0x0000 0x04 0x00
+#define MX91_PAD_SD2_VSELECT__GPIO3_IO19                                         0x0134 0x02e4 0x0000 0x05 0x00
+#define MX91_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1                              0x0134 0x02e4 0x0368 0x06 0x00
+
+#define MX91_PAD_SD3_CLK__USDHC3_CLK                                             0x0138 0x02e8 0x04e8 0x00 0x01
+#define MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK                                        0x0138 0x02e8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CLK__LPUART1_CTS_B                                          0x0138 0x02e8 0x0454 0x02 0x00
+#define MX91_PAD_SD3_CLK__FLEXIO1_FLEXIO20                                       0x0138 0x02e8 0x03b4 0x04 0x01
+#define MX91_PAD_SD3_CLK__GPIO3_IO20                                             0x0138 0x02e8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_CMD__USDHC3_CMD                                             0x013c 0x02ec 0x04ec 0x00 0x01
+#define MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B                                       0x013c 0x02ec 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CMD__LPUART1_RTS_B                                          0x013c 0x02ec 0x0000 0x02 0x00
+#define MX91_PAD_SD3_CMD__FLEXIO1_FLEXIO21                                       0x013c 0x02ec 0x0000 0x04 0x00
+#define MX91_PAD_SD3_CMD__GPIO3_IO21                                             0x013c 0x02ec 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA0__USDHC3_DATA0                                         0x0140 0x02f0 0x04f0 0x00 0x01
+#define MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0                                     0x0140 0x02f0 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA0__LPUART2_CTS_B                                        0x0140 0x02f0 0x0460 0x02 0x00
+#define MX91_PAD_SD3_DATA0__FLEXIO1_FLEXIO22                                     0x0140 0x02f0 0x03b8 0x04 0x01
+#define MX91_PAD_SD3_DATA0__GPIO3_IO22                                           0x0140 0x02f0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA1__USDHC3_DATA1                                         0x0144 0x02f4 0x04f4 0x00 0x01
+#define MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1                                     0x0144 0x02f4 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA1__LPUART2_RTS_B                                        0x0144 0x02f4 0x0000 0x02 0x00
+#define MX91_PAD_SD3_DATA1__FLEXIO1_FLEXIO23                                     0x0144 0x02f4 0x03bc 0x04 0x01
+#define MX91_PAD_SD3_DATA1__GPIO3_IO23                                           0x0144 0x02f4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA2__USDHC3_DATA2                                         0x0148 0x02f8 0x04f8 0x00 0x01
+#define MX91_PAD_SD3_DATA2__LPI2C4_SDA                                           0x0148 0x02f8 0x03fc 0x02 0x01
+#define MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2                                     0x0148 0x02f8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA2__FLEXIO1_FLEXIO24                                     0x0148 0x02f8 0x03c0 0x04 0x01
+#define MX91_PAD_SD3_DATA2__GPIO3_IO24                                           0x0148 0x02f8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA3__USDHC3_DATA3                                         0x014c 0x02fc 0x04fc 0x00 0x01
+#define MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3                                     0x014c 0x02fc 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA3__LPI2C4_SCL                                           0x014c 0x02fc 0x03f8 0x02 0x01
+#define MX91_PAD_SD3_DATA3__FLEXIO1_FLEXIO25                                     0x014c 0x02fc 0x03c4 0x04 0x01
+#define MX91_PAD_SD3_DATA3__GPIO3_IO25                                           0x014c 0x02fc 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_CD_B__USDHC2_CD_B                                           0x0150 0x0300 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN                               0x0150 0x0300 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CD_B__I3C2_SCL                                              0x0150 0x0300 0x03cc 0x02 0x01
+#define MX91_PAD_SD2_CD_B__FLEXIO1_FLEXIO0                                       0x0150 0x0300 0x036c 0x04 0x01
+#define MX91_PAD_SD2_CD_B__GPIO3_IO0                                             0x0150 0x0300 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CD_B__LPI2C1_SCL                                            0x0150 0x0300 0x03e0 0x03 0x01
+
+#define MX91_PAD_SD2_CLK__USDHC2_CLK                                             0x0154 0x0304 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT                               0x0154 0x0304 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CLK__I2C1_SDA                                               0x0154 0x0304 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CLK__I3C2_SDA                                               0x0154 0x0304 0x03d0 0x02 0x01
+#define MX91_PAD_SD2_CLK__FLEXIO1_FLEXIO1                                        0x0154 0x0304 0x0370 0x04 0x01
+#define MX91_PAD_SD2_CLK__GPIO3_IO1                                              0x0154 0x0304 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0                                  0x0154 0x0304 0x0000 0x06 0x00
+#define MX91_PAD_SD2_CLK__LPI2C1_SDA                                             0x0154 0x0304 0x03e4 0x03 0x01
+
+#define MX91_PAD_SD2_CMD__USDHC2_CMD                                             0x0158 0x0308 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CMD__ENET2_1588_EVENT0_IN                                   0x0158 0x0308 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR                                               0x0158 0x0308 0x0000 0x02 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR_B                                             0x0158 0x0308 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CMD__FLEXIO1_FLEXIO2                                        0x0158 0x0308 0x0374 0x04 0x01
+#define MX91_PAD_SD2_CMD__GPIO3_IO2                                              0x0158 0x0308 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1                                  0x0158 0x0308 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA0__USDHC2_DATA0                                         0x015c 0x030c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA0__ENET2_1588_EVENT0_OUT                                0x015c 0x030c 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA0__CAN2_TX                                              0x015c 0x030c 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA0__FLEXIO1_FLEXIO3                                      0x015c 0x030c 0x0378 0x04 0x01
+#define MX91_PAD_SD2_DATA0__GPIO3_IO3                                            0x015c 0x030c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA0__LPUART1_TX                                           0x015c 0x030c 0x045c 0x03 0x00
+#define MX91_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2                                0x015c 0x030c 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA1__USDHC2_DATA1                                         0x0160 0x0310 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA1__ENET2_1588_EVENT1_IN                                 0x0160 0x0310 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA1__CAN2_RX                                              0x0160 0x0310 0x0364 0x02 0x03
+#define MX91_PAD_SD2_DATA1__FLEXIO1_FLEXIO4                                      0x0160 0x0310 0x037c 0x04 0x01
+#define MX91_PAD_SD2_DATA1__GPIO3_IO4                                            0x0160 0x0310 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA1__LPUART1_RX                                           0x0160 0x0310 0x0458 0x03 0x00
+#define MX91_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT                                    0x0160 0x0310 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA2__USDHC2_DATA2                                         0x0164 0x0314 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA2__ENET2_1588_EVENT1_OUT                                0x0164 0x0314 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA2__MQS2_RIGHT                                           0x0164 0x0314 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA2__FLEXIO1_FLEXIO5                                      0x0164 0x0314 0x0380 0x04 0x01
+#define MX91_PAD_SD2_DATA2__GPIO3_IO5                                            0x0164 0x0314 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA2__LPUART2_TX                                           0x0164 0x0314 0x0468 0x03 0x00
+#define MX91_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP                                    0x0164 0x0314 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA3__USDHC2_DATA3                                         0x0168 0x0318 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA3__LPTMR2_ALT1                                          0x0168 0x0318 0x0448 0x01 0x01
+#define MX91_PAD_SD2_DATA3__MQS2_LEFT                                            0x0168 0x0318 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA3__FLEXIO1_FLEXIO6                                      0x0168 0x0318 0x0384 0x04 0x01
+#define MX91_PAD_SD2_DATA3__GPIO3_IO6                                            0x0168 0x0318 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA3__LPUART2_RX                                           0x0168 0x0318 0x0464 0x03 0x00
+#define MX91_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET                             0x0168 0x0318 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_RESET_B__USDHC2_RESET_B                                     0x016c 0x031c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_RESET_B__LPTMR2_ALT2                                        0x016c 0x031c 0x044c 0x01 0x01
+#define MX91_PAD_SD2_RESET_B__FLEXIO1_FLEXIO7                                    0x016c 0x031c 0x0388 0x04 0x01
+#define MX91_PAD_SD2_RESET_B__GPIO3_IO7                                          0x016c 0x031c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET                          0x016c 0x031c 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C1_SCL__LPI2C1_SCL                                            0x0170 0x0320 0x03e0 0x00 0x02
+#define MX91_PAD_I2C1_SCL__I3C1_SCL                                              0x0170 0x0320 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SCL__LPUART1_DCB_B                                         0x0170 0x0320 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SCL__TPM2_CH0                                              0x0170 0x0320 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SCL__GPIO1_IO0                                             0x0170 0x0320 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C1_SDA__LPI2C1_SDA                                            0x0174 0x0324 0x03e4 0x00 0x02
+#define MX91_PAD_I2C1_SDA__I3C1_SDA                                              0x0174 0x0324 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SDA__LPUART1_RIN_B                                         0x0174 0x0324 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SDA__TPM2_CH1                                              0x0174 0x0324 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SDA__GPIO1_IO1                                             0x0174 0x0324 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C2_SCL__LPI2C2_SCL                                            0x0178 0x0328 0x03e8 0x00 0x01
+#define MX91_PAD_I2C2_SCL__I3C1_PUR                                              0x0178 0x0328 0x0000 0x01 0x00
+#define MX91_PAD_I2C2_SCL__LPUART2_DCB_B                                         0x0178 0x0328 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SCL__TPM2_CH2                                              0x0178 0x0328 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SCL__SAI1_RX_SYNC                                          0x0178 0x0328 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SCL__GPIO1_IO2                                             0x0178 0x0328 0x0000 0x05 0x00
+#define MX91_PAD_I2C2_SCL__I3C1_PUR_B                                            0x0178 0x0328 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C2_SDA__LPI2C2_SDA                                            0x017c 0x032c 0x03ec 0x00 0x01
+#define MX91_PAD_I2C2_SDA__LPUART2_RIN_B                                         0x017c 0x032c 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SDA__TPM2_CH3                                              0x017c 0x032c 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SDA__SAI1_RX_BCLK                                          0x017c 0x032c 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SDA__GPIO1_IO3                                             0x017c 0x032c 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_RXD__LPUART1_RX                                           0x0180 0x0330 0x0458 0x00 0x01
+#define MX91_PAD_UART1_RXD__ELE_UART_RX                                          0x0180 0x0330 0x0000 0x01 0x00
+#define MX91_PAD_UART1_RXD__LPSPI2_SIN                                           0x0180 0x0330 0x0440 0x02 0x02
+#define MX91_PAD_UART1_RXD__TPM1_CH0                                             0x0180 0x0330 0x0000 0x03 0x00
+#define MX91_PAD_UART1_RXD__GPIO1_IO4                                            0x0180 0x0330 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_TXD__LPUART1_TX                                           0x0184 0x0334 0x045c 0x00 0x01
+#define MX91_PAD_UART1_TXD__ELE_UART_TX                                          0x0184 0x0334 0x0000 0x01 0x00
+#define MX91_PAD_UART1_TXD__LPSPI2_PCS0                                          0x0184 0x0334 0x0434 0x02 0x02
+#define MX91_PAD_UART1_TXD__TPM1_CH1                                             0x0184 0x0334 0x0000 0x03 0x00
+#define MX91_PAD_UART1_TXD__GPIO1_IO5                                            0x0184 0x0334 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_RXD__LPUART2_RX                                           0x0188 0x0338 0x0464 0x00 0x01
+#define MX91_PAD_UART2_RXD__LPUART1_CTS_B                                        0x0188 0x0338 0x0454 0x01 0x01
+#define MX91_PAD_UART2_RXD__LPSPI2_SOUT                                          0x0188 0x0338 0x0444 0x02 0x02
+#define MX91_PAD_UART2_RXD__TPM1_CH2                                             0x0188 0x0338 0x0000 0x03 0x00
+#define MX91_PAD_UART2_RXD__SAI1_MCLK                                            0x0188 0x0338 0x04d4 0x04 0x00
+#define MX91_PAD_UART2_RXD__GPIO1_IO6                                            0x0188 0x0338 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_TXD__LPUART2_TX                                           0x018c 0x033c 0x0468 0x00 0x01
+#define MX91_PAD_UART2_TXD__LPUART1_RTS_B                                        0x018c 0x033c 0x0000 0x01 0x00
+#define MX91_PAD_UART2_TXD__LPSPI2_SCK                                           0x018c 0x033c 0x043c 0x02 0x02
+#define MX91_PAD_UART2_TXD__TPM1_CH3                                             0x018c 0x033c 0x0000 0x03 0x00
+#define MX91_PAD_UART2_TXD__GPIO1_IO7                                            0x018c 0x033c 0x0000 0x05 0x00
+#define MX91_PAD_UART2_TXD__SAI3_TX_SYNC                                         0x018c 0x033c 0x04e0 0x07 0x02
+
+#define MX91_PAD_PDM_CLK__PDM_CLK                                                0x0190 0x0340 0x0000 0x00 0x00
+#define MX91_PAD_PDM_CLK__MQS1_LEFT                                              0x0190 0x0340 0x0000 0x01 0x00
+#define MX91_PAD_PDM_CLK__LPTMR1_ALT1                                            0x0190 0x0340 0x0000 0x04 0x00
+#define MX91_PAD_PDM_CLK__GPIO1_IO8                                              0x0190 0x0340 0x0000 0x05 0x00
+#define MX91_PAD_PDM_CLK__CAN1_TX                                                0x0190 0x0340 0x0000 0x06 0x00
+
+#define MX91_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0                                0x0194 0x0344 0x04c4 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM0__MQS1_RIGHT                                     0x0194 0x0344 0x0000 0x01 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1                                    0x0194 0x0344 0x0424 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK                                    0x0194 0x0344 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2                                    0x0194 0x0344 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__GPIO1_IO9                                      0x0194 0x0344 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__CAN1_RX                                        0x0194 0x0344 0x0360 0x06 0x01
+
+#define MX91_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1                                0x0198 0x0348 0x04c8 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1                                    0x0198 0x0348 0x0438 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK                                    0x0198 0x0348 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3                                    0x0198 0x0348 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10                                     0x0198 0x0348 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1                          0x0198 0x0348 0x0368 0x06 0x01
+
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC                                         0x019c 0x034c 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_DATA1                                        0x019c 0x034c 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXFS__LPSPI1_PCS0                                          0x019c 0x034c 0x0420 0x02 0x01
+#define MX91_PAD_SAI1_TXFS__LPUART2_DTR_B                                        0x019c 0x034c 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXFS__MQS1_LEFT                                            0x019c 0x034c 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXFS__GPIO1_IO11                                           0x019c 0x034c 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXC__SAI1_TX_BCLK                                          0x01a0 0x0350 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXC__LPUART2_CTS_B                                         0x01a0 0x0350 0x0460 0x01 0x01
+#define MX91_PAD_SAI1_TXC__LPSPI1_SIN                                            0x01a0 0x0350 0x042c 0x02 0x01
+#define MX91_PAD_SAI1_TXC__LPUART1_DSR_B                                         0x01a0 0x0350 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXC__CAN1_RX                                               0x01a0 0x0350 0x0360 0x04 0x02
+#define MX91_PAD_SAI1_TXC__GPIO1_IO12                                            0x01a0 0x0350 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0                                        0x01a4 0x0354 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXD0__LPUART2_RTS_B                                        0x01a4 0x0354 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXD0__LPSPI1_SCK                                           0x01a4 0x0354 0x0428 0x02 0x01
+#define MX91_PAD_SAI1_TXD0__LPUART1_DTR_B                                        0x01a4 0x0354 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXD0__CAN1_TX                                              0x01a4 0x0354 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXD0__GPIO1_IO13                                           0x01a4 0x0354 0x0000 0x05 0x00
+#define MX91_PAD_SAI1_TXD0__SAI1_MCLK                                            0x01a4 0x0354 0x04d4 0x06 0x01
+
+#define MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0                                        0x01a8 0x0358 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_RXD0__SAI1_MCLK                                            0x01a8 0x0358 0x04d4 0x01 0x02
+#define MX91_PAD_SAI1_RXD0__LPSPI1_SOUT                                          0x01a8 0x0358 0x0430 0x02 0x01
+#define MX91_PAD_SAI1_RXD0__LPUART2_DSR_B                                        0x01a8 0x0358 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_RXD0__MQS1_RIGHT                                           0x01a8 0x0358 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_RXD0__GPIO1_IO14                                           0x01a8 0x0358 0x0000 0x05 0x00
+
+#define MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY                                        0x01ac 0x035c 0x0000 0x00 0x00
+#define MX91_PAD_WDOG_ANY__GPIO1_IO15                                            0x01ac 0x035c 0x0000 0x05 0x00
+#endif /* __DTS_IMX91_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts
new file mode 100644
index 000000000000..5c430e6fca65
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts
@@ -0,0 +1,739 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx91-tqma9131.dtsi"
+
+/{
+	model = "TQ-Systems i.MX91 TQMa91xxLA/TQMa91xxCA on MBa91xxCA starter kit";
+	compatible = "tq,imx91-tqma9131-mba91xxca", "tq,imx91-tqma9131", "fsl,imx91";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm2 2 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+			};
+		};
+	};
+
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&expander2 4 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <10000 1>;
+		fan-supply = <&reg_12v0>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		powerdown-gpios = <&expander2 3 GPIO_ACTIVE_LOW>;
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+				};
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "PMIC_IRQ#",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "USB_C_ALERT#", "BM2_LCD_INT#",
+		/* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_jtag>;
+	gpio-line-names =
+		/* 00 */ "SD2_CD#", "", "", "",
+		/* 04 */ "", "", "", "SD2_RST#",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "TEMP_EVENT_MOD#", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		temp-event-mod-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "TEMP_EVENT_MOD#";
+		};
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-low states, the signal
+		 * is inactive, e.g. not power down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-low states, the signal
+		 * is inactive, e.g. not disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-low states, the signal
+		 * is inactive, e.g. not in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "LVDS_SHDN#",
+				  "FAN_PWR_EN", "",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	interrupt-parent = <&expander0>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&tpm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET1_MDC__ENET1_MDC				0x51e>,
+			   /* SION | HYS | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO				0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000>,
+			   <MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000>,
+			   <MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x1000>,
+			   <MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x1000>,
+			   <MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC			0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x51e>,
+			   <MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1				0x51e>,
+			   <MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x51e>,
+			   <MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x51e>,
+			   <MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_CCM_CLKO1__GPIO3_IO26		0x1000>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET2_MDC__ENET2_MDC		0x51e>,
+			   /* SION | HYS | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET2_MDIO__ENET2_MDIO		0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0		0x1000>,
+			   <MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1		0x1000>,
+			   <MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2		0x1000>,
+			   <MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3		0x1000>,
+			   <MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL	0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC		0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0		0x51e>,
+			   <MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1		0x51e>,
+			   <MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2		0x51e>,
+			   <MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3		0x51e>,
+			   <MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL	0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC		0x58e>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_CCM_CLKO2__GPIO3_IO27		0x1000>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = /* HYS | PU | FSEL_0 | DSE no drive */
+			   <MX91_PAD_PDM_BIT_STREAM0__CAN1_RX		0x1200>,
+			   /* PU | FSEL_3 | DSE X4 */
+			   <MX91_PAD_PDM_CLK__CAN1_TX			0x039e>;
+	};
+
+	pinctrl_jtag: jtaggrp {
+		fsl,pins = <MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK	0x051e>,
+			   <MX91_PAD_DAP_TDI__JTAG_MUX_TDI		0x1200>,
+			   <MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO	0x031e>,
+			   <MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS	0x1200>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = /* SION | HYS | OD | FSEL_3 | DSE X4 */
+			   <MX91_PAD_GPIO_IO28__LPI2C3_SDA		0x4000199e>,
+			   <MX91_PAD_GPIO_IO29__LPI2C3_SCL		0x4000199e>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX91_PAD_SAI1_RXD0__GPIO1_IO14		0x1000>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_SAI1_TXC__GPIO1_IO12		0x1000>;
+	};
+
+	pinctrl_rgbdisp: rgbdispgrp {
+		fsl,pins = <MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK	0x31e>,
+			   <MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE	0x31e>,
+			   <MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC	0x31e>,
+			   <MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC	0x31e>,
+			   <MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0	0x31e>,
+			   <MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1	0x31e>,
+			   <MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2	0x31e>,
+			   <MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3	0x31e>,
+			   <MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4	0x31e>,
+			   <MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5	0x31e>,
+			   <MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6	0x31e>,
+			   <MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7	0x31e>,
+			   <MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8	0x31e>,
+			   <MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9	0x31e>,
+			   <MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10	0x31e>,
+			   <MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11	0x31e>,
+			   <MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12	0x31e>,
+			   <MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13	0x31e>,
+			   <MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14	0x31e>,
+			   <MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15	0x31e>,
+			   <MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16	0x31e>,
+			   <MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17	0x31e>,
+			   <MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18	0x31e>,
+			   <MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19	0x31e>,
+			   <MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20	0x31e>,
+			   <MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21	0x31e>,
+			   <MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22	0x31e>,
+			   <MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23	0x31e>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_SAI1_TXFS__GPIO1_IO11		0x1000>;
+	};
+
+	pinctrl_tpm2: tpm2grp {
+		fsl,pins = <MX91_PAD_I2C2_SCL__TPM2_CH2			0x57e>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10	0x1000>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_UART1_RXD__LPUART1_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX91_PAD_UART1_TXD__LPUART1_TX		0x011e>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_UART2_RXD__LPUART2_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX91_PAD_UART2_TXD__LPUART2_TX		0x011e>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX91_PAD_SAI1_TXD0__LPUART2_RTS_B		0x011e>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_SD2_CD_B__GPIO3_IO0		0x1000>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X5 */
+			   <MX91_PAD_SD2_CLK__USDHC2_CLK		0x05be>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX91_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   /* HYS | PU | FSEL_3 | DSE X3 */
+			   <MX91_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e>,
+			   <MX91_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e>,
+			   <MX91_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e>,
+			   <MX91_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX91_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X6 */
+			   <MX91_PAD_SD2_CLK__USDHC2_CLK		0x05fe>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX91_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   <MX91_PAD_SD2_DATA0__USDHC2_DATA0		0x4000139e>,
+			   <MX91_PAD_SD2_DATA1__USDHC2_DATA1		0x4000139e>,
+			   <MX91_PAD_SD2_DATA2__USDHC2_DATA2		0x4000139e>,
+			   <MX91_PAD_SD2_DATA3__USDHC2_DATA3		0x4000139e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX91_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi b/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi
new file mode 100644
index 000000000000..5792952b7a8e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+
+#include "imx91.dtsi"
+
+/{
+	model = "TQ-Systems i.MX91 TQMa91xxCA / TQMa91xxLA SOM";
+	compatible = "tq,imx91-tqma9131", "fsl,imx91";
+
+	memory@80000000 {
+		device_type = "memory";
+		/* our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* default CMA, must not exceed assembled memory */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		/* EdgeLock secure enclave  */
+		ele_reserved: ele-reserved@a4120000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4120000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	/* SD2 RST# via PMIC SW_EN */
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&buck4>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	vref-supply = <&buck5>;
+};
+
+&flexspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		/*
+		 * no DQS, RXCLKSRC internal loop back, max 66 MHz
+		 * clk framework uses CLK_DIVIDER_ROUND_CLOSEST
+		 * selected value together with root from
+		 * IMX91_CLK_SYS_PLL_PFD1 @ 800.000.000 Hz helps to
+		 * respect the maximum value.
+		 */
+		spi-max-frequency = <62000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	se97_som: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pca9451a: pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9451>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V8_SOC - hw developer guide: 0.75 .. 0.9 */
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_DDRQ - 1.1 V for LPDDR4 */
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_3V3 - EEPROM, RTC, ... */
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 - SPI NOR, eMMC, RAM VDD1... */
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 - RAM VDD2*/
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_BBSM, fix 1.8 */
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V8_ANA */
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_SD2 - 3.3/1.8V USDHC2 io Voltage */
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom0: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&buck4>;
+	};
+
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&buck4>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @57) */
+	eeprom@5f {
+		compatible = "atmel,24c64d-wl";
+		reg = <0x5f>;
+		vcc-supply = <&buck4>;
+	};
+
+	accelerometer@6a {
+		compatible = "st,ism330dhcx";
+		reg = <0x6a>;
+		vdd-supply = <&buck4>;
+		vddio-supply = <&buck4>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = /* FSEL 3  | DSE X6 */
+			   <MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B		0x01fe>,
+			   <MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK		0x01fe>,
+			   /* HYS | PU | FSEL 3  | DSE X6 */
+			   <MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0	0x13fe>,
+			   <MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1	0x13fe>,
+			   /* HYS | FSEL 3  | DSE X6 (external PU) */
+			   <MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2	0x11fe>,
+			   <MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3	0x11fe>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = /* SION | OD | FSEL 3 | DSE X4 */
+			   <MX91_PAD_I2C1_SCL__LPI2C1_SCL		0x4000199e>,
+			   <MX91_PAD_I2C1_SDA__LPI2C1_SDA		0x4000199e>;
+	};
+
+	pinctrl_pca9451: pca9451grp {
+		fsl,pins = /* HYS | PU */
+			   <MX91_PAD_I2C2_SDA__GPIO1_IO3		0x1200>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = /* FSEL 2 | DSE X2 */
+			   <MX91_PAD_SD2_RESET_B__GPIO3_IO7		0x106>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = /* PD | FSEL 3 | DSE X5 */
+			   <MX91_PAD_SD1_CLK__USDHC1_CLK		0x5be>,
+			   /* HYS | FSEL 0 | no drive */
+			   <MX91_PAD_SD1_STROBE__USDHC1_STROBE		0x1000>,
+			   /* HYS | FSEL 3 | X5 */
+			   <MX91_PAD_SD1_CMD__USDHC1_CMD		0x400011be>,
+			   /* HYS | FSEL 3 | X4 */
+			   <MX91_PAD_SD1_DATA0__USDHC1_DATA0		0x4000119e>,
+			   <MX91_PAD_SD1_DATA1__USDHC1_DATA1		0x4000119e>,
+			   <MX91_PAD_SD1_DATA2__USDHC1_DATA2		0x4000119e>,
+			   <MX91_PAD_SD1_DATA3__USDHC1_DATA3		0x4000119e>,
+			   <MX91_PAD_SD1_DATA4__USDHC1_DATA4		0x4000119e>,
+			   <MX91_PAD_SD1_DATA5__USDHC1_DATA5		0x4000119e>,
+			   <MX91_PAD_SD1_DATA6__USDHC1_DATA6		0x4000119e>,
+			   <MX91_PAD_SD1_DATA7__USDHC1_DATA7		0x4000119e>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = /* PU | FSEL 1 | DSE X4 */
+			   <MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY		0x31e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91.dtsi b/arch/arm64/boot/dts/freescale/imx91.dtsi
new file mode 100644
index 000000000000..4d8300b2a7bc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+#include "imx91-pinfunc.h"
+#include "imx91_93_common.dtsi"
+
+&clk {
+	compatible = "fsl,imx91-ccm";
+};
+
+&ddr_pmu {
+	compatible = "fsl,imx91-ddr-pmu", "fsl,imx93-ddr-pmu";
+};
+
+&eqos {
+	clocks = <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+		 <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+		 <&clk IMX91_CLK_ENET_TIMER>,
+		 <&clk IMX91_CLK_ENET1_QOS_TSN>,
+		 <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>;
+	assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+			  <&clk IMX91_CLK_ENET1_QOS_TSN>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+	assigned-clock-rates = <100000000>, <250000000>;
+};
+
+&fec {
+	clocks = <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+		 <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+		 <&clk IMX91_CLK_ENET_TIMER>,
+		 <&clk IMX91_CLK_ENET2_REGULAR>,
+		 <&clk IMX93_CLK_DUMMY>;
+	assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+			  <&clk IMX91_CLK_ENET2_REGULAR>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+	assigned-clock-rates = <100000000>, <250000000>;
+};
+
+&i3c1 {
+	clocks = <&clk IMX93_CLK_BUS_AON>,
+		 <&clk IMX93_CLK_I3C1_GATE>,
+		 <&clk IMX93_CLK_DUMMY>;
+};
+
+&i3c2 {
+	clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+		 <&clk IMX93_CLK_I3C2_GATE>,
+		 <&clk IMX93_CLK_DUMMY>;
+};
+
+&iomuxc {
+	compatible = "fsl,imx91-iomuxc";
+};
+
+&media_blk_ctrl {
+	compatible = "fsl,imx91-media-blk-ctrl", "syscon";
+	clocks = <&clk IMX93_CLK_MEDIA_APB>,
+		 <&clk IMX93_CLK_MEDIA_AXI>,
+		 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+		 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+		 <&clk IMX93_CLK_CAM_PIX>,
+		 <&clk IMX93_CLK_LCDIF_GATE>,
+		 <&clk IMX93_CLK_ISI_GATE>,
+		 <&clk IMX93_CLK_MIPI_CSI_GATE>;
+	clock-names = "apb", "axi", "nic", "disp", "cam",
+		      "lcdif", "isi", "csi";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
new file mode 100644
index 000000000000..52da571f26c4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
@@ -0,0 +1,1187 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022,2025 NXP
+ */
+
+#include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/fsl,imx93-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx93-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <10000>;
+				exit-latency-us = <7000>;
+				min-residency-us = <27000>;
+				wakeup-latency-us = <15000>;
+			};
+		};
+
+		A55_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,no-tick-in-suspend;
+		interrupt-parent = <&gic>;
+	};
+
+	gic: interrupt-controller@48000000 {
+		compatible = "arm,gic-v3";
+		reg = <0 0x48000000 0 0x10000>,
+		      <0 0x48040000 0 0xc0000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+	};
+
+	mqs1: mqs1 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&aonmix_ns_gpr>;
+		status = "disabled";
+	};
+
+	mqs2: mqs2 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&wakeupmix_gpr>;
+		status = "disabled";
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+		clock-names = "main_clk";
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+		clock-names = "main_clk";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x80000000>,
+			 <0x28000000 0x0 0x28000000 0x10000000>;
+
+		aips1: bus@44000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x44000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edma1: dma-controller@44000000 {
+				compatible = "fsl,imx93-edma3";
+				reg = <0x44000000 0x200000>;
+				#dma-cells = <3>;
+				dma-channels = <31>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,  //  0: Reserved
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,  //  1: CANFD1
+					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,  //  2: Reserved
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,  //  3: GPIO1 CH0
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,  //  4: GPIO1 CH1
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, //  5: I3C1 TO Bus
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, //  6: I3C1 From Bus
+					     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, //  7: LPI2C1 M TX
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, //  8: LPI2C1 S TX
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, //  9: LPI2C2 M RX
+					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, // 10: LPI2C2 S RX
+					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, // 11: LPSPI1 TX
+					     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, // 12: LPSPI1 RX
+					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, // 13: LPSPI2 TX
+					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, // 14: LPSPI2 RX
+					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, // 15: LPTMR1
+					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, // 16: LPUART1 TX
+					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, // 17: LPUART1 RX
+					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, // 18: LPUART2 TX
+					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, // 19: LPUART2 RX
+					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, // 20: S400
+					     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, // 21: SAI TX
+					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, // 22: SAI RX
+					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, // 23: TPM1 CH0/CH2
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, // 24: TPM1 CH1/CH3
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, // 25: TPM1 Overflow
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, // 26: TMP2 CH0/CH2
+					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
+					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
+					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, // 30: ADC1
+					     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;  // err
+				clocks = <&clk IMX93_CLK_EDMA1_GATE>;
+				clock-names = "dma";
+			};
+
+			aonmix_ns_gpr: syscon@44210000 {
+				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
+				reg = <0x44210000 0x1000>;
+			};
+
+			system_counter: timer@44290000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			wdog1: watchdog@442d0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x442d0000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG1_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@442e0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x442e0000 0x10000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG2_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM1_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM2_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c1: i3c@44330000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_I3C1_GATE>,
+					 <&clk IMX93_CLK_I3C1_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 7 0 0>, <&edma1 8 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 9 0 0>, <&edma1 10 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 11 0 0>, <&edma1 12 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 13 0 0>, <&edma1 14 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart1: serial@44380000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x44380000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma1 17 0 FSL_EDMA_RX>, <&edma1 16 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart2: serial@44390000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x44390000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma1 19 0 FSL_EDMA_RX>, <&edma1 18 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan1: can@443a0000 {
+				compatible = "fsl,imx93-flexcan";
+				reg = <0x443a0000 0x10000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_CAN1_GATE>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX93_CLK_CAN1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>;
+				status = "disabled";
+			};
+
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			iomuxc: pinctrl@443c0000 {
+				compatible = "fsl,imx93-iomuxc";
+				reg = <0x443c0000 0x10000>;
+				status = "okay";
+			};
+
+			bbnsm: bbnsm@44440000 {
+				compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
+				reg = <0x44440000 0x10000>;
+
+				bbnsm_rtc: rtc {
+					compatible = "nxp,imx93-bbnsm-rtc";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				bbnsm_pwrkey: pwrkey {
+					compatible = "nxp,imx93-bbnsm-pwrkey";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+					linux,code = <KEY_POWER>;
+				};
+			};
+
+			clk: clock-controller@44450000 {
+				compatible = "fsl,imx93-ccm";
+				reg = <0x44450000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1";
+				assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
+				assigned-clock-rates = <393216000>;
+				status = "okay";
+			};
+
+			src: system-controller@44460000 {
+				compatible = "fsl,imx93-src", "syscon";
+				reg = <0x44460000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				mediamix: power-domain@44462400 {
+					compatible = "fsl,imx93-src-slice";
+					reg = <0x44462400 0x400>, <0x44465800 0x400>;
+					#power-domain-cells = <0>;
+					clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+						 <&clk IMX93_CLK_MEDIA_APB>;
+				};
+			};
+
+			clock-controller@44480000 {
+				compatible = "fsl,imx93-anatop";
+				reg = <0x44480000 0x2000>;
+				#clock-cells = <1>;
+			};
+
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx93-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_PDM_IPG>,
+					 <&clk IMX93_CLK_PDM_GATE>,
+					 <&clk IMX93_CLK_AUDIO_PLL>;
+				clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
+				dmas = <&edma1 29 0 5>;
+				dma-names = "rx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			adc1: adc@44530000 {
+				compatible = "nxp,imx93-adc";
+				reg = <0x44530000 0x10000>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_ADC1_GATE>;
+				clock-names = "ipg";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		aips2: bus@42000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x42000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edma2: dma-controller@42000000 {
+				compatible = "fsl,imx93-edma4";
+				reg = <0x42000000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_EDMA2_GATE>;
+				clock-names = "dma";
+			};
+
+			wakeupmix_gpr: syscon@42420000 {
+				compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
+				reg = <0x42420000 0x1000>;
+			};
+
+			wdog3: watchdog@42490000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x42490000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG3_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog4: watchdog@424a0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x424a0000 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG4_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog5: watchdog@424b0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x424b0000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG5_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm3: pwm@424e0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424e0000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM3_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm4: pwm@424f0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424f0000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM4_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm5: pwm@42500000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42500000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM5_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm6: pwm@42510000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42510000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM6_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c2: i3c@42520000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_I3C2_GATE>,
+					 <&clk IMX93_CLK_I3C2_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi3: spi@42550000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart3: serial@42570000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42570000 0x1000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart4: serial@42580000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42580000 0x1000>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart5: serial@42590000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42590000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart6: serial@425a0000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x425a0000 0x1000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan2: can@425b0000 {
+				compatible = "fsl,imx93-flexcan";
+				reg = <0x425b0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_CAN2_GATE>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX93_CLK_CAN2>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>;
+				status = "disabled";
+			};
+
+			flexspi1: spi@425e0000 {
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>,
+					 <&clk IMX93_CLK_FLEXSPI1_GATE>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				status = "disabled";
+			};
+
+			sai2: sai@42650000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sai3: sai@42660000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			xcvr: xcvr@42680000 {
+				compatible = "fsl,imx93-xcvr";
+				reg = <0x42680000 0x800>,
+				      <0x42680800 0x400>,
+				      <0x42680c00 0x080>,
+				      <0x42680e00 0x080>;
+				reg-names = "ram", "regs", "rxfifo", "txfifo";
+				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SPDIF_IPG>,
+					 <&clk IMX93_CLK_SPDIF_GATE>,
+					 <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
+				clock-names = "ipg", "phy", "spba", "pll_ipg";
+				dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			lpuart7: serial@42690000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42690000 0x1000>;
+				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart8: serial@426a0000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x426a0000 0x1000>;
+				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi5: spi@426f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+		};
+
+		aips3: bus@42800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x42800000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usdhc1: mmc@42850000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42850000 0x10000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC1_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <8>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@42860000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42860000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC2_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC2>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			fec: ethernet@42890000 {
+				compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x42890000 0x10000>;
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_ENET1_GATE>,
+					 <&clk IMX93_CLK_ENET1_GATE>,
+					 <&clk IMX93_CLK_ENET_TIMER1>,
+					 <&clk IMX93_CLK_ENET_REF>,
+					 <&clk IMX93_CLK_ENET_REF_PHY>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
+						  <&clk IMX93_CLK_ENET_REF>,
+						  <&clk IMX93_CLK_ENET_REF_PHY>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <100000000>, <250000000>, <50000000>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
+				nvmem-cells = <&eth_mac1>;
+				nvmem-cell-names = "mac-address";
+				status = "disabled";
+			};
+
+			eqos: ethernet@428a0000 {
+				compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
+				reg = <0x428a0000 0x10000>;
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_wake_irq";
+				clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
+					 <&clk IMX93_CLK_ENET_QOS_GATE>,
+					 <&clk IMX93_CLK_ENET_TIMER2>,
+					 <&clk IMX93_CLK_ENET>,
+					 <&clk IMX93_CLK_ENET_QOS_GATE>;
+				clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>,
+						  <&clk IMX93_CLK_ENET>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+				assigned-clock-rates = <100000000>, <250000000>;
+				intf_mode = <&wakeupmix_gpr 0x28>;
+				snps,clk-csr = <6>;
+				nvmem-cells = <&eth_mac2>;
+				nvmem-cell-names = "mac-address";
+				status = "disabled";
+			};
+
+			usdhc3: mmc@428b0000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x428b0000 0x10000>;
+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC3_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC3>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio2: gpio@43810000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43810000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
+				 <&clk IMX93_CLK_GPIO2_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 4 30>;
+			ngpios = <30>;
+		};
+
+		gpio3: gpio@43820000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43820000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
+				 <&clk IMX93_CLK_GPIO3_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
+				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
+			ngpios = <32>;
+		};
+
+		gpio4: gpio@43830000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43830000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
+				 <&clk IMX93_CLK_GPIO4_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
+			ngpios = <30>;
+		};
+
+		gpio1: gpio@47400000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x47400000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
+				 <&clk IMX93_CLK_GPIO1_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 92 16>;
+			ngpios = <16>;
+		};
+
+		ocotp: efuse@47510000 {
+			compatible = "fsl,imx93-ocotp", "syscon";
+			reg = <0x47510000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth_mac1: mac-address@4ec {
+				reg = <0x4ec 0x6>;
+			};
+
+			eth_mac2: mac-address@4f2 {
+				reg = <0x4f2 0x6>;
+			};
+
+		};
+
+		s4muap: mailbox@47520000 {
+			compatible = "fsl,imx93-mu-s4";
+			reg = <0x47520000 0x10000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			#mbox-cells = <2>;
+		};
+
+		media_blk_ctrl: system-controller@4ac10000 {
+			compatible = "fsl,imx93-media-blk-ctrl", "syscon";
+			reg = <0x4ac10000 0x10000>;
+			power-domains = <&mediamix>;
+			clocks = <&clk IMX93_CLK_MEDIA_APB>,
+				 <&clk IMX93_CLK_MEDIA_AXI>,
+				 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+				 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+				 <&clk IMX93_CLK_CAM_PIX>,
+				 <&clk IMX93_CLK_PXP_GATE>,
+				 <&clk IMX93_CLK_LCDIF_GATE>,
+				 <&clk IMX93_CLK_ISI_GATE>,
+				 <&clk IMX93_CLK_MIPI_CSI_GATE>,
+				 <&clk IMX93_CLK_MIPI_DSI_GATE>;
+			clock-names = "apb", "axi", "nic", "disp", "cam",
+				      "pxp", "lcdif", "isi", "csi", "dsi";
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
+		usbotg1: usb@4c100000 {
+			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x4c100000 0x200>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+				 <&clk IMX93_CLK_HSIO_32K_GATE>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			assigned-clocks = <&clk IMX93_CLK_HSIO>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+			assigned-clock-rates = <133000000>;
+			phys = <&usbphynop1>;
+			fsl,usbmisc = <&usbmisc1 0>;
+			status = "disabled";
+		};
+
+		usbmisc1: usbmisc@4c100200 {
+			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x4c100200 0x200>;
+			#index-cells = <1>;
+		};
+
+		usbotg2: usb@4c200000 {
+			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x4c200000 0x200>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+				 <&clk IMX93_CLK_HSIO_32K_GATE>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			assigned-clocks = <&clk IMX93_CLK_HSIO>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+			assigned-clock-rates = <133000000>;
+			phys = <&usbphynop2>;
+			fsl,usbmisc = <&usbmisc2 0>;
+			status = "disabled";
+		};
+
+		usbmisc2: usbmisc@4c200200 {
+			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x4c200200 0x200>;
+			#index-cells = <1>;
+		};
+
+		memory-controller@4e300000 {
+			compatible = "nxp,imx9-memory-controller";
+			reg = <0x4e300000 0x800>, <0x4e301000 0x1000>;
+			reg-names = "ctrl", "inject";
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+		};
+
+		ddr_pmu: ddr-pmu@4e300dc0 {
+			compatible = "fsl,imx93-ddr-pmu";
+			reg = <0x4e300dc0 0x200>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 2b9d47716f75..b94a24193e19 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -5,12 +5,32 @@
 
 /dts-v1/;
 
+#include <dt-bindings/usb/pd.h>
 #include "imx93.dtsi"
 
 / {
 	model = "NXP i.MX93 11X11 EVK board";
 	compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
 
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+	};
+
 	chosen {
 		stdout-path = &lpuart1;
 	};
@@ -38,7 +58,7 @@
 			no-map;
 		};
 
-		vdev1vring0: vdev1vring0@a4000000 {
+		vdev1vring0: vdev1vring0@a4010000 {
 			reg = <0 0xa4010000 0 0x8000>;
 			no-map;
 		};
@@ -48,8 +68,8 @@
 			no-map;
 		};
 
-		rsc_table: rsc-table@2021f000 {
-			reg = <0 0x2021f000 0 0x1000>;
+		rsc_table: rsc-table@2021e000 {
+			reg = <0 0x2021e000 0 0x1000>;
 			no-map;
 		};
 
@@ -61,6 +81,15 @@
 
 	};
 
+	reg_vdd_12v: regulator-vdd-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pcal6524 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_vref_1v8: regulator-adc-vref {
 		compatible = "regulator-fixed";
 		regulator-name = "vref_1v8";
@@ -68,6 +97,32 @@
 		regulator-max-microvolt = <1800000>;
 	};
 
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&adp5585 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_standby: regulator-can2-standby {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&adp5585 6 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -76,8 +131,109 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <12000>;
 		enable-active-high;
 	};
+
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&adp5585 0 100000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <100>;
+		power-supply = <&reg_vdd_12v>;
+		enable-gpios = <&adp5585 9 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	bt_sco_codec: bt-sco-codec {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8962>;
+		hp-det-gpio = <&pcal6524 4 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC",
+			"IN1R", "AMIC";
+	};
+
+	sound-xcvr {
+		compatible = "fsl,imx-audio-card";
+		model = "imx-audio-xcvr";
+
+		pri-dai-link {
+			link-name = "XCVR PCM";
+
+			cpu {
+				sound-dai = <&xcvr>;
+			};
+		};
+	};
 };
 
 &adc1 {
@@ -95,17 +251,10 @@
 	status = "okay";
 };
 
-&mu1 {
-	status = "okay";
-};
-
-&mu2 {
-	status = "okay";
-};
-
 &eqos {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-1 = <&pinctrl_eqos_sleep>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 	status = "okay";
@@ -118,14 +267,18 @@
 
 		ethphy1: ethernet-phy@1 {
 			reg = <1>;
-			eee-broken-1000t;
+			reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
 		};
 	};
 };
 
 &fec {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy2>;
 	fsl,magic-packet;
@@ -138,11 +291,248 @@
 
 		ethphy2: ethernet-phy@2 {
 			reg = <2>;
-			eee-broken-1000t;
+			reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
 		};
 	};
 };
 
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_standby>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	wm8962: codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX93_CLK_SAI3_GATE>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	inertial-meter@6a {
+		compatible = "st,lsm6dso";
+		reg = <0x6a>;
+	};
+};
+
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <610000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <670000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1060000>;
+				regulator-max-microvolt = <1140000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <840000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	adp5585: io-expander@34 {
+		compatible = "adi,adp5585-00", "adi,adp5585";
+		reg = <0x34>;
+		vdd-supply = <&buck4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-reserved-ranges = <5 1>;
+		#pwm-cells = <3>;
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	adp5585_isp: io-expander@34 {
+		compatible = "adi,adp5585-01", "adi,adp5585";
+		reg = <0x34>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#pwm-cells = <3>;
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	ptn5110_2: tcpc@51 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x51>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+		typec2_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec2_dr_sw: endpoint {
+						remote-endpoint = <&usb2_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	pcf2131: rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
 &lpuart1 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -153,32 +543,142 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&micfil {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_pdm>;
+	pinctrl-1 = <&pinctrl_pdm_sleep>;
+	assigned-clocks = <&clk IMX93_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
+
+&mu2 {
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai1>;
+	pinctrl-1 = <&pinctrl_sai1_sleep>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai3>;
+	pinctrl-1 = <&pinctrl_sai3_sleep>;
+	assigned-clocks = <&clk IMX93_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb2_drd_sw: endpoint {
+			remote-endpoint = <&typec2_dr_sw>;
+		};
+	};
 };
 
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1>;
-	pinctrl-2 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
 };
 
 &usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
 	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	bus-width = <4>;
 	status = "okay";
-	no-sdio;
 	no-mmc;
 };
 
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
 &wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&xcvr {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_spdif>;
+	pinctrl-1 = <&pinctrl_spdif_sleep>;
+	assigned-clocks = <&clk IMX93_CLK_SPDIF>,
+			 <&clk IMX93_CLK_AUDIO_XCVR>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>,
+			 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+	assigned-clock-rates = <12288000>, <200000000>;
 	status = "okay";
 };
 
@@ -191,17 +691,36 @@
 			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
 			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
 			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
-			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x58e
 			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
 			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
 			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
 			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
 			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
-			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x5fe
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
 			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
 		>;
 	};
 
+	pinctrl_eqos_sleep: eqossleepgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__GPIO4_IO00				0x31e
+			MX93_PAD_ENET1_MDIO__GPIO4_IO01				0x31e
+			MX93_PAD_ENET1_RD0__GPIO4_IO10                          0x31e
+			MX93_PAD_ENET1_RD1__GPIO4_IO11				0x31e
+			MX93_PAD_ENET1_RD2__GPIO4_IO12				0x31e
+			MX93_PAD_ENET1_RD3__GPIO4_IO13				0x31e
+			MX93_PAD_ENET1_RXC__GPIO4_IO09                          0x31e
+			MX93_PAD_ENET1_RX_CTL__GPIO4_IO08			0x31e
+			MX93_PAD_ENET1_TD0__GPIO4_IO05                          0x31e
+			MX93_PAD_ENET1_TD1__GPIO4_IO04                          0x31e
+			MX93_PAD_ENET1_TD2__GPIO4_IO03				0x31e
+			MX93_PAD_ENET1_TD3__GPIO4_IO02				0x31e
+			MX93_PAD_ENET1_TXC__GPIO4_IO07                          0x31e
+			MX93_PAD_ENET1_TX_CTL__GPIO4_IO06                       0x31e
+		>;
+	};
+
 	pinctrl_fec: fecgrp {
 		fsl,pins = <
 			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e
@@ -210,17 +729,43 @@
 			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
 			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
 			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
-			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x58e
 			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
 			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
 			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
 			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
 			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
-			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
 			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
 		>;
 	};
 
+	pinctrl_fec_sleep: fecsleepgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__GPIO4_IO14			0x51e
+			MX93_PAD_ENET2_MDIO__GPIO4_IO15			0x51e
+			MX93_PAD_ENET2_RD0__GPIO4_IO24			0x51e
+			MX93_PAD_ENET2_RD1__GPIO4_IO25			0x51e
+			MX93_PAD_ENET2_RD2__GPIO4_IO26			0x51e
+			MX93_PAD_ENET2_RD3__GPIO4_IO27			0x51e
+			MX93_PAD_ENET2_RXC__GPIO4_IO23                  0x51e
+			MX93_PAD_ENET2_RX_CTL__GPIO4_IO22		0x51e
+			MX93_PAD_ENET2_TD0__GPIO4_IO19			0x51e
+			MX93_PAD_ENET2_TD1__GPIO4_IO18			0x51e
+			MX93_PAD_ENET2_TD2__GPIO4_IO17			0x51e
+			MX93_PAD_ENET2_TD3__GPIO4_IO16			0x51e
+			MX93_PAD_ENET2_TXC__GPIO4_IO21                  0x51e
+			MX93_PAD_ENET2_TX_CTL__GPIO4_IO20               0x51e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX	0x139e
+			MX93_PAD_GPIO_IO27__CAN2_RX	0x139e
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
@@ -237,18 +782,114 @@
 		>;
 	};
 
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL			0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__PDM_CLK			0x31e
+			MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00	0x31e
+			MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01	0x31e
+		>;
+	};
+
+	pinctrl_pdm_sleep: pdmsleepgrp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__GPIO1_IO08			0x31e
+			MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09		0x31e
+			MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10		0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__SAI1_TX_BCLK			0x31e
+			MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC		0x31e
+			MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00		0x31e
+			MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00		0x31e
+		>;
+	};
+
+	pinctrl_sai1_sleep: sai1sleepgrp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__GPIO1_IO12                   0x51e
+			MX93_PAD_SAI1_TXFS__GPIO1_IO11			0x51e
+			MX93_PAD_SAI1_TXD0__GPIO1_IO13			0x51e
+			MX93_PAD_SAI1_RXD0__GPIO1_IO14			0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x1582
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001382
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x40001382
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001382
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x40001382
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001382
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001382
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001382
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001382
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001382
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x1582
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000138e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000138e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000138e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000138e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000138e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000138e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000138e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
 			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
-			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
-			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
-			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
-			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
-			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
-			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
-			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
-			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
-			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
 			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
 		>;
 	};
@@ -259,21 +900,159 @@
 		>;
 	};
 
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO26__SAI3_TX_SYNC                0x31e
+			MX93_PAD_GPIO_IO16__SAI3_TX_BCLK                0x31e
+			MX93_PAD_GPIO_IO17__SAI3_MCLK           0x31e
+			MX93_PAD_GPIO_IO19__SAI3_TX_DATA00              0x31e
+			MX93_PAD_GPIO_IO20__SAI3_RX_DATA00              0x31e
+		>;
+	};
+
+	pinctrl_sai3_sleep: sai3sleepgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO26__GPIO2_IO26			0x51e
+			MX93_PAD_GPIO_IO16__GPIO2_IO16			0x51e
+			MX93_PAD_GPIO_IO17__GPIO2_IO17			0x51e
+			MX93_PAD_GPIO_IO19__GPIO2_IO19			0x51e
+			MX93_PAD_GPIO_IO20__GPIO2_IO20			0x51e
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__SPDIF_IN		0x31e
+			MX93_PAD_GPIO_IO23__SPDIF_OUT		0x31e
+		>;
+	};
+
+	pinctrl_spdif_sleep: spdifsleepgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__GPIO2_IO22		0x31e
+			MX93_PAD_GPIO_IO23__GPIO2_IO23		0x31e
+		>;
+	};
+
 	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
 		fsl,pins = <
 			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
 		>;
 	};
 
+	pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x1582
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x40001382
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x40001382
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x40001382
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x40001382
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x40001382
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000138e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000138e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
 			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
-			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x400013fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x400013fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x400013fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x400013fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013fe
 			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
+
+	pinctrl_usdhc2_sleep: usdhc2sleepgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__GPIO3_IO01            0x51e
+			MX93_PAD_SD2_CMD__GPIO3_IO02		0x51e
+			MX93_PAD_SD2_DATA0__GPIO3_IO03		0x51e
+			MX93_PAD_SD2_DATA1__GPIO3_IO04		0x51e
+			MX93_PAD_SD2_DATA2__GPIO3_IO05		0x51e
+			MX93_PAD_SD2_DATA3__GPIO3_IO06		0x51e
+			MX93_PAD_SD2_VSELECT__GPIO3_IO19	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x1582
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x40001382
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x40001382
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x40001382
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x40001382
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x40001382
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x158e
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x4000138e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x4000138e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x4000138e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x4000138e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x4000138e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x15fe
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x400013fe
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x400013fe
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x400013fe
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x400013fe
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x400013fe
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__GPIO3_IO20		0x31e
+			MX93_PAD_SD3_CMD__GPIO3_IO21		0x31e
+			MX93_PAD_SD3_DATA0__GPIO3_IO22		0x31e
+			MX93_PAD_SD3_DATA1__GPIO3_IO23		0x31e
+			MX93_PAD_SD3_DATA2__GPIO3_IO24		0x31e
+			MX93_PAD_SD3_DATA3__GPIO3_IO25		0x31e
+		>;
+	};
+
+	pinctrl_usdhc3_wlan: usdhc3wlangrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x31e
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
new file mode 100644
index 000000000000..f9eebd27d640
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx93.dtsi"
+
+/ {
+	model = "NXP i.MX93 14X14 EVK board";
+	compatible = "fsl,imx93-14x14-evk", "fsl,imx93";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		vdev0vring0: vdev0vring0@a4000000 {
+			reg = <0 0xa4000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@a4008000 {
+			reg = <0 0xa4008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@a4010000 {
+			reg = <0 0xa4010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@a4018000 {
+			reg = <0 0xa4018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@2021e000 {
+			reg = <0 0x2021e000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a4020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4020000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524_2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can1_en>;
+	};
+
+	reg_can1_en: regulator-can1-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524_2 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524_2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can2_en>;
+	};
+
+	reg_can2_en: regulator-can2-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524_2 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	reg_vdd_12v: regulator-vdd-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_vdd_12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pcal6524 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1>,
+		 <&mu1 1 1>,
+		 <&mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy2: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			eee-broken-1000t;
+			reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	lsm6dsm@6a {
+		compatible = "st,lsm6dso";
+		reg = <0x6a>;
+	};
+};
+
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	pcal6524_2: gpio@20 {
+		compatible = "nxp,pcal6524";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9452";
+		reg = <0x25>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <610000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <670000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1060000>;
+				regulator-max-microvolt = <1140000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <840000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	status = "okay";
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
+
+&mu2 {
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-mmc;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX	0x139e
+			MX93_PAD_GPIO_IO27__CAN2_RX	0x139e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL			0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x57e
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x58e
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX	0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX		0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B	0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B	0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x1582
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001382
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x40001382
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001382
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x40001382
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001382
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001382
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001382
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001382
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001382
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x1582
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000138e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000138e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000138e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000138e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000138e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000138e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000138e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x1582
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x40001382
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x40001382
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x40001382
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x40001382
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x40001382
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000138e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000138e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x400013fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x400013fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x400013fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x400013fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013fe
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x1582
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x40001382
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x40001382
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x40001382
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x40001382
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x40001382
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x158e
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x4000138e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x4000138e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x4000138e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x4000138e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x4000138e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x15fe
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x400013fe
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x400013fe
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x400013fe
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x400013fe
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x400013fe
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__GPIO3_IO20		0x31e
+			MX93_PAD_SD3_CMD__GPIO3_IO21		0x31e
+			MX93_PAD_SD3_DATA0__GPIO3_IO22		0x31e
+			MX93_PAD_SD3_DATA1__GPIO3_IO23		0x31e
+			MX93_PAD_SD3_DATA2__GPIO3_IO24		0x31e
+			MX93_PAD_SD3_DATA3__GPIO3_IO25		0x31e
+		>;
+	};
+
+	pinctrl_usdhc3_wlan: usdhc3wlangrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26	  0x31e
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso
new file mode 100644
index 000000000000..3fe6209a3423
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i3c/i3c.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "imx93-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&lpi2c1 {
+	status = "disabled";
+};
+
+&i3c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i3c1>;
+	#address-cells = <3>;
+	#size-cells = <0>;
+	i2c-scl-hz = <400000>;
+	status = "okay";
+
+	tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50 0x00 (I2C_FM | I2C_NO_FILTER_LOW_FREQUENCY)>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&usb1_drd_sw {
+	remote-endpoint = <&typec1_dr_sw>;
+};
+
+&iomuxc {
+	pinctrl_i3c1: i3c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__I3C1_SCL	0x40000186
+			MX93_PAD_I2C1_SDA__I3C1_SDA	0x40000186
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
new file mode 100644
index 000000000000..0852067eab2c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
@@ -0,0 +1,772 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx93.dtsi"
+
+/ {
+	model = "NXP i.MX93 9x9 Quick Start Board";
+	compatible = "fsl,imx93-9x9-qsb", "fsl,imx93";
+
+	bt_sco_codec: bt-sco-codec {
+		#sound-dai-cells = <1>;
+		compatible = "linux,bt-sco";
+	};
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		vdev0vring0: vdev0vring0@a4000000 {
+			reg = <0 0xa4000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@a4008000 {
+			reg = <0 0xa4008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@a4010000 {
+			reg = <0 0xa4010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@a4018000 {
+			reg = <0 0xa4018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@2021e000 {
+			reg = <0 0x2021e000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a4020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4020000 0 0x100000>;
+			no-map;
+		};
+
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "VREF_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_rpi_3v3: regulator-rpi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_RPI_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8962>;
+		hp-det-gpio = <&pcal6524 4 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC",
+			"IN1R", "AMIC";
+	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1>,
+		 <&mu1 1 1>,
+		 <&mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX93_CLK_SAI3_GATE>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	p3t1085: temperature-sensor@48 {
+		compatible = "nxp,p3t1085";
+		reg = <0x48>;
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	inertial-meter@6a {
+		compatible = "st,lsm6dso";
+		reg = <0x6a>;
+	};
+};
+
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6524>;
+
+		exp-sel-hog {
+			gpio-hog;
+			gpios = <22 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		mic-can-sel-hog {
+			gpio-hog;
+			gpios = <17 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2237500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart5 {
+	/* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&micfil {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX93_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
+
+&mu2 {
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX93_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	fsl,sai-synchronous-rx;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-mmc;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x58e
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL		0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL		0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x31e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__PDM_CLK			0x31e
+			MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00	0x31e
+			MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01	0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX	0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX		0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B	0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B	0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x1582
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001382
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x40001382
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001382
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x40001382
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001382
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001382
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001382
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001382
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001382
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x1582
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000138e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000138e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000138e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000138e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000138e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000138e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000138e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__SAI1_TX_BCLK			0x31e
+			MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC		0x31e
+			MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00		0x31e
+			MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00		0x31e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO12__SAI3_RX_SYNC		0x31e
+			MX93_PAD_GPIO_IO18__SAI3_RX_BCLK		0x31e
+			MX93_PAD_GPIO_IO17__SAI3_MCLK			0x31e
+			MX93_PAD_GPIO_IO19__SAI3_TX_DATA00		0x31e
+			MX93_PAD_GPIO_IO20__SAI3_RX_DATA00		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x1582
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x40001382
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x40001382
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x40001382
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x40001382
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x40001382
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000138e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000138e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x400013fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x400013fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x400013fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x400013fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013fe
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x1582
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x40001382
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x40001382
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x40001382
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x40001382
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x40001382
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x158e
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x4000138e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x4000138e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x4000138e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x4000138e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x4000138e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x15fe
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x400013fe
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x400013fe
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x400013fe
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x400013fe
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x400013fe
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
new file mode 100644
index 000000000000..4620c070f4d7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx93-kontron-osm-s.dtsi"
+
+/ {
+	model = "Kontron BL i.MX93 OSM-S";
+	compatible = "kontron,imx93-bl-osm-s", "kontron,imx93-osm-s", "fsl,imx93";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
+		spi6 = &lpspi7;
+		spi7 = &lpspi8;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&tpm6 1 5000 0>;
+	};
+
+	reg_vcc_panel: regulator-vcc-panel {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vcc_panel>;
+		gpio = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC_PANEL";
+	};
+};
+
+&eqos { /* Second ethernet (OSM-S ETH_B) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id4f51.e91b";
+			reg = <1>;
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fec { /* First ethernet (OSM-S ETH_A) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_rgmii>;
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id4f51.e91b";
+			reg = <1>;
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&lpi2c2 {
+	status = "okay";
+
+	gpio_expander_dio: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "DIO1_OUT","DIO1_IN", "DIO2_OUT","DIO2_IN",
+				  "DIO3_OUT","DIO3_IN", "DIO4_OUT","DIO4_IN";
+		interrupt-parent = <&gpio4>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpspi8 {
+	assigned-clocks = <&clk IMX93_CLK_LPSPI8>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+	assigned-clock-rates = <100000000>;
+	status = "okay";
+
+	eeram@0 {
+		compatible = "microchip,48l640";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&lpuart1 {
+	status = "okay";
+};
+
+&lpuart7 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&lpuart6 {
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&tpm6 {
+	status = "okay";
+};
+
+&usbotg1 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+};
+
+&usbotg2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+
+	usb1@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+	};
+};
+
+&usdhc2 {
+	vmmc-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_reg_vcc_panel: regvccpanelgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO21__GPIO2_IO21		0x31e /* PWM_2 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
new file mode 100644
index 000000000000..c79b1df339db
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
@@ -0,0 +1,636 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx93.dtsi"
+
+/ {
+	model = "Kontron OSM-S i.MX93";
+	compatible = "kontron,imx93-osm-s", "fsl,imx93";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_usdhc2_vcc: regulator-usdhc2-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_A";
+	};
+
+	reg_vdd_carrier: regulator-vdd-carrier {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_CARRIER";
+
+		regulator-state-standby {
+			regulator-on-in-suspend;
+		};
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+
+		regulator-state-disk {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&flexcan1 { /* OSM-S CAN_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&flexcan2 { /* OSM-S CAN_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "", "", "I2C_A_SCL", "I2C_A_SDA",
+			  "UART_CON_RX", "UART_CON_TX", "UART_C_RX", "UART_C_TX",
+			  "CAN_A_TX", "CAN_A_RX", "GPIO_A_0", "SPI_A_CS0",
+			  "SPI_A_SDI", "SPI_A_SCK","SPI_A_SDO";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+	gpio-line-names = "I2C_B_SDA", "I2C_B_SCL", "GPIO_B_1", "GPIO_A_2",
+			  "UART_B_TX", "UART_B_RX", "UART_B_RTS", "UART_B_CTS",
+			  "UART_A_TX", "UART_A_RX", "UART_A_RTS", "UART_A_CTS",
+			  "SPI_B_CS0", "SPI_B_SDI", "SPI_B_SDO", "SPI_B_SCK",
+			  "I2S_BITCLK", "I2S_MCLK", "GPIO_A_1", "I2S_A_DATA_OUT",
+			  "I2S_A_DATA_IN", "PWM_2", "GPIO_A_3", "PWM_1",
+			  "PWM_0", "CAN_B_TX", "I2S_LRCLK", "CAN_B_RX", "GPIO_A_4",
+			  "GPIO_A_5";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+	gpio-line-names = "SDIO_A_CD", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+			  "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SDIO_B_CLK", "SDIO_B_CMD", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "GPIO_A_6", "GPIO_A_7";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	gpio-line-names = "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD4", "ETH_B_TXD3",
+			  "ETH_B_TXD2", "ETH_B_TXD1", "ETH_B_TX_EN", "ETH_B_TX_CLK",
+			  "ETH_B_RX_CTL", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1",
+			  "ETH_B_RXD2", "ETH_B_RXD3", "ETH_MDC", "ETH_MDIO",
+			  "ETH_A_TXD3", "ETH_A_TXD2", "ETH_A_TXD1", "ETH_A_TXD0",
+			  "ETH_A_TX_EN", "ETH_A_TX_CLK", "ETH_A_RX_CTL", "ETH_A_RX_CLK",
+			  "ETH_A_RXD0", "ETH_A_RXD1", "ETH_A_RXD2", "ETH_A_RXD3",
+			  "GPIO_B_0", "CARRIER_PWR_EN";
+};
+
+&lpi2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	pca9451: pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		nxp,i2c-lt-enable;
+
+		regulators {
+			reg_vdd_soc: BUCK1 { /* dual phase with BUCK3 */
+				regulator-name = "+0V8_VDD_SOC (BUCK1)";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vddq_ddr: BUCK2 {
+				regulator-name = "+0V6_VDDQ_DDR (BUCK2)";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <600000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "+3V3 (BUCK4)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "+1V8 (BUCK5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_ana: LDO4 {
+				regulator-name = "+0V8_VDD_ANA (LDO4)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-name = "NVCC_SD (LDO5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				nxp,sd-vsel-fixed-low;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "onnn,n24s64b", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		size = <8192>;
+		num-addresses = <1>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&lpi2c2 { /* OSM-S I2C_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+};
+
+&lpi2c3 { /* OSM-S I2C_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+};
+
+&lpspi1 { /* OSM-S SPI_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi1>;
+	cs-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+};
+
+&lpspi8 { /* OSM-S SPI_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi8>;
+	cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+};
+
+&lpuart1 { /* OSM-S UART_CON */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+};
+
+&lpuart2 { /* OSM-S UART_C */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+};
+
+&lpuart6 { /* OSM-S UART_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart6>;
+};
+
+&lpuart7 { /* OSM-S UART_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart7>;
+};
+
+&tpm3 { /* OSM-S PWM_0 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm3>;
+};
+
+&tpm4 { /* OSM-S PWM_2 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm4>;
+};
+
+&tpm6 { /* OSM-S PWM_1 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm6>;
+};
+
+&usdhc1 { /* eMMC */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 { /* OSM-S SDIO_A */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+};
+
+&usdhc3 { /* OSM-S SDIO_B */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet_rgmii: enetrgmiigrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e /* ETH_MDC */
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x57e /* ETH_MDIO */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e /* ETH_A_(S)(R)(G)MII_RXD0 */
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e /* ETH_A_(S)(R)(G)MII_RXD1 */
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e /* ETH_A_(R)(G)MII_RXD2 */
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e /* ETH_A_(R)(G)MII_RXD3 */
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe /* ETH_A_(R)(G)MII_RX_CLK */
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e /* ETH_A_(S)(R)(G)MII_TXD0 */
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e /* ETH_A_(S)(R)(G)MII_TXD1 */
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e /* ETH_A_(S)(R)(G)MII_TXD2 */
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e /* ETH_A_(S)(R)(G)MII_TXD3 */
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe /* ETH_A_(R)(G)MII_TX_CLK */
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_eqos_rgmii: eqosrgmiigrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC		0x57e /* ETH_B_MDC */
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO		0x57e /* ETH_B_MDIO */
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e /* ETH_B_(S)(R)(G)MII_RXD0 */
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e /* ETH_B_(S)(R)(G)MII_RXD1 */
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2		0x57e /* ETH_B_(R)(G)MII_RXD2 */
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3		0x57e /* ETH_B_(R)(G)MII_RXD3 */
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x57e /* ETH_B_(R)(G)MII_RX_CLK */
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e /* ETH_B_(R)(G)MII_RX_DV(_ER) */
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x57e /* ETH_B_(S)(R)(G)MII_TXD0 */
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x57e /* ETH_B_(S)(R)(G)MII_TXD1 */
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2		0x57e /* ETH_B_(S)(R)(G)MII_TXD2 */
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3		0x57e /* ETH_B_(S)(R)(G)MII_TXD3 */
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x57e /* ETH_B_(R)(G)MII_TX_CLK */
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x57e /* ETH_B_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__CAN1_TX			0x139e /* CAN_A_TX */
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX		0x139e /* CAN_A_RX */
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX			0x139e /* CAN_B_TX */
+			MX93_PAD_GPIO_IO27__CAN2_RX			0x139e /* CAN_B_RX */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10		0x31e /* GPIO_A_0 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO18__GPIO2_IO18			0x31e /* GPIO_A_1 */
+			MX93_PAD_GPIO_IO03__GPIO2_IO03			0x31e /* GPIO_A_2 */
+			MX93_PAD_GPIO_IO22__GPIO2_IO22			0x31e /* GPIO_A_3 */
+			MX93_PAD_GPIO_IO28__GPIO2_IO28			0x31e /* GPIO_A_4 */
+			MX93_PAD_GPIO_IO29__GPIO2_IO29			0x31e /* GPIO_A_5 */
+			MX93_PAD_GPIO_IO02__GPIO2_IO02			0x31e /* GPIO_B_1 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26			0x31e /* GPIO_A_6 */
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e /* GPIO_A_7 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO3__GPIO4_IO28			0x31e /* GPIO_B_0 */
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL			0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e /* I2C_A_SCL */
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO01__LPI2C3_SCL			0x40000b9e /* I2C_B_SCL */
+			MX93_PAD_GPIO_IO00__LPI2C3_SDA			0x40000b9e /* I2C_B_SDA */
+		>;
+	};
+
+	pinctrl_lpspi1: lpspi1grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__LPSPI1_SIN			0x3fe /* SPI_A_SDI_(IO0) */
+			MX93_PAD_SAI1_RXD0__LPSPI1_SOUT			0x3fe /* SPI_A_SDO_(IO1) */
+			MX93_PAD_SAI1_TXD0__LPSPI1_SCK			0x3fe /* SPI_A_SCK */
+			MX93_PAD_SAI1_TXFS__GPIO1_IO11			0x3fe /* SPI_A_CS0# */
+		>;
+	};
+
+	pinctrl_lpspi8: lpspi8grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO13__LPSPI8_SIN			0x3fe /* SPI_B_SDI */
+			MX93_PAD_GPIO_IO14__LPSPI8_SOUT			0x3fe /* SPI_B_SDO */
+			MX93_PAD_GPIO_IO15__LPSPI8_SCK			0x3fe /* SPI_B_SCK */
+			MX93_PAD_GPIO_IO12__GPIO2_IO12			0x3fe /* SPI_B_CS0# */
+		>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e /* UART_CON_RX */
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e /* UART_CON_TX */
+		>;
+	};
+
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <
+			MX93_PAD_UART2_RXD__LPUART2_RX			0x31e /* UART_C_RX */
+			MX93_PAD_UART2_TXD__LPUART2_TX			0x31e /* UART_C_TX */
+		>;
+	};
+
+	pinctrl_lpuart6: lpuart6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO05__LPUART6_RX			0x31e /* UART_B_RX */
+			MX93_PAD_GPIO_IO04__LPUART6_TX			0x31e /* UART_B_TX */
+			MX93_PAD_GPIO_IO07__LPUART6_RTS_B		0x31e /* UART_B_CTS */
+			MX93_PAD_GPIO_IO06__LPUART6_CTS_B		0x31e /* UART_B_RTS */
+		>;
+	};
+
+	pinctrl_lpuart7: lpuart7grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO09__LPUART7_RX			0x31e /* UART_A_RX */
+			MX93_PAD_GPIO_IO08__LPUART7_TX			0x31e /* UART_A_TX */
+			MX93_PAD_GPIO_IO11__LPUART7_RTS_B		0x31e /* UART_A_CTS */
+			MX93_PAD_GPIO_IO10__LPUART7_CTS_B		0x31e /* UART_A_RTS */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07		0x31e /* SDIO_A_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_vdd_carrier: regvddcarriergrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO4__GPIO4_IO29			0x31e /* CARRIER_PWR_EN */
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_VSELECT__GPIO3_IO19		0x31e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO20__SAI3_RX_DATA00		0x31e /* I2S_A_DATA_IN */
+			MX93_PAD_GPIO_IO19__SAI3_TX_DATA00		0x31e /* I2S_A_DATA_OUT */
+			MX93_PAD_GPIO_IO17__SAI3_MCLK			0x31e /* I2S_MCLK */
+			MX93_PAD_GPIO_IO26__SAI3_TX_SYNC		0x31e /* I2S_LRCLK */
+			MX93_PAD_GPIO_IO16__SAI3_TX_BCLK		0x31e /* I2S_BITCLK */
+		>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO24__TPM3_CH3			0x57e /* PWM_0 */
+		>;
+	};
+
+	pinctrl_tpm4: tpm4grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO21__TPM4_CH1			0x57e /* PWM_2 */
+		>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO23__TPM6_CH1			0x57e /* PWM_1 */
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x1582
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001382
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x40001382
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001382
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x40001382
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001382
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001382
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001382
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001382
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001382
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x1582
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000138e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000138e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000138e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000138e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000138e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000138e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000138e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x1582 /* SDIO_A_CLK */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x40001382 /* SDIO_A_CMD */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x40001382 /* SDIO_A_D0 */
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x40001382 /* SDIO_A_D1 */
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x40001382 /* SDIO_A_D2 */
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x40001382 /* SDIO_A_D3 */
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x158e /* SDIO_A_CLK */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x4000138e /* SDIO_A_CMD */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e /* SDIO_A_D0 */
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e /* SDIO_A_D1 */
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e /* SDIO_A_D2 */
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e /* SDIO_A_D3 */
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x15fe /* SDIO_A_CLK */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x400013fe /* SDIO_A_CMD */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x400013fe /* SDIO_A_D0 */
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x400013fe /* SDIO_A_D1 */
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x400013fe /* SDIO_A_D2 */
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x400013fe /* SDIO_A_D3 */
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x31e /* SDIO_A_CD# */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK			0x1582 /* SDIO_B_CLK */
+			MX93_PAD_SD3_CMD__USDHC3_CMD			0x40001382 /* SDIO_B_CMD */
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0		0x40001382 /* SDIO_B_D0 */
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1		0x40001382 /* SDIO_B_D1 */
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2		0x40001382 /* SDIO_B_D2 */
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3		0x40001382 /* SDIO_B_D3 */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK			0x158e /* SDIO_B_CLK */
+			MX93_PAD_SD3_CMD__USDHC3_CMD			0x4000138e /* SDIO_B_CMD */
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0		0x4000138e /* SDIO_B_D0 */
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1		0x4000138e /* SDIO_B_D1 */
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2		0x4000138e /* SDIO_B_D2 */
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3		0x4000138e /* SDIO_B_D3 */
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK			0x15fe /* SDIO_B_CLK */
+			MX93_PAD_SD3_CMD__USDHC3_CMD			0x400013fe /* SDIO_B_CMD */
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0		0x400013fe /* SDIO_B_D0 */
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1		0x400013fe /* SDIO_B_D1 */
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2		0x400013fe /* SDIO_B_D2 */
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3		0x400013fe /* SDIO_B_D3 */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso
new file mode 100644
index 000000000000..7381b87444e8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+/*
+ * NOTE: When uSDHC3 port is multiplexed on GPIO_IO[27:22] pads, it only
+ * supports 50 MHz mode, due to introduction of potential variations in
+ * trace impedance, drive strength, and timing skew. Refer to i.MX 93
+ * Application Processors Data Sheet, Rev. 3, page 60 for more details.
+ */
+&usdhc3 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wlbt>;
+	pinctrl-1 = <&pinctrl_usdhc3_sleep>, <&pinctrl_wlbt>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX	0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX		0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B	0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B	0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__USDHC3_CLK		0x179e
+			MX93_PAD_SD3_CMD__USDHC3_CMD 		0x4000178e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x4000138e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x4000138e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x4000138e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x4000138e
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3sleepgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__USDHC3_CLK		0x31e
+			MX93_PAD_SD3_CMD__USDHC3_CMD 		0x31e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x31e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x31e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x31e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x31e
+		>;
+	};
+
+	pinctrl_wlbt: wlbtgrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27		0x31e	/* WAKE_DEV */
+			MX93_PAD_CCM_CLKO3__GPIO4_IO28		0x31e	/* WAKE_HOST */
+			MX93_PAD_CCM_CLKO4__GPIO4_IO29		0x31e	/* PDn */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
new file mode 100644
index 000000000000..5599e296919f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ *
+ * Product homepage:
+ * https://www.phytec.eu/en/produkte/development-kits/phyboard-nash/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx93-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Nash-i.MX93";
+	compatible = "phytec,imx93-phyboard-nash", "phytec,imx93-phycore-som",
+		     "fsl,imx93";
+
+	aliases {
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	curr_sens: current-sense {
+		compatible = "current-sense-amplifier";
+		#io-channel-cells = <0>;
+		io-channels = <&adc1 1>;
+		sense-gain-div = <2>;
+		sense-gain-mult = <50>;
+		sense-resistor-micro-ohms = <35000>;
+	};
+
+	flexcan1_tc: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_tc>;
+		standby-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&curr_sens 0>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VCC_SD";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+	};
+
+	reg_vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+	};
+};
+
+/* ADC */
+&adc1 {
+	status = "okay";
+};
+
+/* Ethernet */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+/* CAN */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	phys = <&flexcan1_tc>;
+	status = "okay";
+};
+
+/* I2C2 */
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	/* RTC */
+	i2c_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		trickle-resistor-ohms = <3000>;
+		wakeup-source;
+	};
+
+	/* EEPROM */
+	eeprom@54 {
+		compatible = "atmel,24c32";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc_1v8>;
+	};
+};
+
+/* SPI6 */
+&lpspi6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi6>;
+	cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* TPM */
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* RS-232/RS-485 */
+&lpuart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0	0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1	0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2	0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3	0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0	0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1	0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2	0x50e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3	0x50e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x50e
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x1002
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x1382
+		>;
+	};
+
+	pinctrl_flexcan1_tc: flexcan1tcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_TD3__GPIO4_IO16		0x31e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL		0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpspi6: lpspi6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO00__GPIO2_IO00		0x386
+			MX93_PAD_GPIO_IO01__LPSPI6_SIN		0x3fe
+			MX93_PAD_GPIO_IO02__LPSPI6_SOUT		0x386
+			MX93_PAD_GPIO_IO03__LPSPI6_SCK		0x386
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD2__GPIO4_IO26		0x31e
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO17__GPIO2_IO17		0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x30e
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO08__LPUART7_TX		0x30e
+			MX93_PAD_GPIO_IO09__LPUART7_RX		0x31e
+			MX93_PAD_GPIO_IO10__LPUART7_CTS_B	0x31e
+			MX93_PAD_GPIO_IO11__LPUART7_RTS_B	0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_default: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000178e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x40001386
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x40001386
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x40001386
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000138e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013be
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso
new file mode 100644
index 000000000000..a20898734741
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Andrej Picej <andrej.picej@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		button-s2 {
+			label = "sleep";
+			linux,code = <KEY_SLEEP>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+
+		user-led2 {
+			gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10	0x31e
+		>;
+	};
+
+	pinctrl_user_leds: userledsgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_RD3__GPIO4_IO13		0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso
new file mode 100644
index 000000000000..a7285f009566
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Andrej Picej <andrej.picej@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <60>;
+		reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+	};
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wlbt>;
+	pinctrl-1 = <&pinctrl_usdhc3_sleep>, <&pinctrl_wlbt>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+
+	brmcf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX	0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX		0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B	0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B	0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__USDHC3_CLK		0x179e
+			MX93_PAD_GPIO_IO23__USDHC3_CMD		0x4000139e
+			MX93_PAD_GPIO_IO24__USDHC3_DATA0	0x4000139e
+			MX93_PAD_GPIO_IO25__USDHC3_DATA1	0x4000139e
+			MX93_PAD_GPIO_IO26__USDHC3_DATA2	0x4000139e
+			MX93_PAD_GPIO_IO27__USDHC3_DATA3	0x4000139e
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3sleepgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__USDHC3_CLK		0x31e
+			MX93_PAD_GPIO_IO23__USDHC3_CMD		0x31e
+			MX93_PAD_GPIO_IO24__USDHC3_DATA0	0x31e
+			MX93_PAD_GPIO_IO25__USDHC3_DATA1	0x31e
+			MX93_PAD_GPIO_IO26__USDHC3_DATA2	0x31e
+			MX93_PAD_GPIO_IO27__USDHC3_DATA3	0x31e
+		>;
+	};
+
+	pinctrl_wlbt: wlbtgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_RD3__GPIO4_IO13		0x31e	/* BT ENABLE */
+			MX93_PAD_ENET1_TXC__GPIO4_IO07		0x31e	/* WLAN ENABLE */
+			MX93_PAD_I2C1_SCL__GPIO1_IO00		0x31e	/* HOST WAKEUP */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
new file mode 100644
index 000000000000..802d96b19e4c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ *
+ * Product homepage:
+ * phyBOARD-Segin carrier board is reused for the i.MX93 design.
+ * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/
+ */
+/dts-v1/;
+
+#include "imx93-phycore-som.dtsi"
+
+/{
+	model = "PHYTEC phyBOARD-Segin-i.MX93";
+	compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-phycore-som",
+		     "fsl,imx93";
+
+	aliases {
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	flexcan1_tc: can-phy0 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_tc>;
+		enable-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sound_1v8: regulator-sound-1v8 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VCC1V8_AUDIO";
+	};
+
+	reg_sound_3v3: regulator-sound-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC3V3_ANALOG";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SD";
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&audio_codec>;
+			clocks = <&clk IMX93_CLK_SAI1>;
+		};
+	};
+};
+
+/* Ethernet */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+	assigned-clock-rates = <100000000>, <50000000>;
+	status = "okay";
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-id0022.1561";
+		reg = <2>;
+		clocks = <&clk IMX93_CLK_ENET_REF_PHY>;
+		clock-names = "rmii-ref";
+		micrel,led-mode = <1>;
+	};
+};
+
+/* CAN */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	phys = <&flexcan1_tc>;
+	status = "okay";
+};
+
+/* I2C2 */
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	/* Codec */
+	audio_codec: audio-codec@18 {
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&reg_sound_3v3>;
+		IOVDD-supply = <&reg_sound_3v3>;
+		DRVDD-supply = <&reg_sound_3v3>;
+		DVDD-supply = <&reg_sound_1v8>;
+	};
+
+	/* RTC */
+	i2c_rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Audio */
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <19200000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* USB  */
+&usbotg1 {
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK	0x4000050e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x50e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x50e
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x50e
+			MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER		0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+		>;
+	};
+
+	pinctrl_flexcan1_tc: flexcan1tcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_TD3__GPIO4_IO16		0x31e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL		0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD2__GPIO4_IO26		0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX93_PAD_UART2_RXD__SAI1_MCLK		0x1202
+			MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC	0x1202
+			MX93_PAD_SAI1_TXC__SAI1_TX_BCLK		0x1202
+			MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00	0x1402
+			MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00	0x1402
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x30e
+		>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_default: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso b/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso
new file mode 100644
index 000000000000..23bede7833f8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		rsc_table: rsc-table@2021e000 {
+			reg = <0 0x2021e000 0 0x1000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@a4000000 {
+			reg = <0 0xa4000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@a4008000 {
+			reg = <0 0xa4008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@a4010000 {
+			reg = <0 0xa4010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@a4018000 {
+			reg = <0 0xa4018000 0 0x8000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a4020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4020000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1>,
+		 <&mu1 1 1>,
+		 <&mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+		 <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
new file mode 100644
index 000000000000..3f069905cf0b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ *
+ * Product homepage:
+ * https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
+ */
+
+#include <dt-bindings/leds/common.h>
+
+#include "imx93.dtsi"
+
+/{
+	model = "PHYTEC phyCORE-i.MX93";
+	compatible = "phytec,imx93-phycore-som", "fsl,imx93";
+
+	aliases {
+		ethernet0 = &fec;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vdda_1v8: regulator-vdda-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDA_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&buck5>;
+	};
+};
+
+/* ADC */
+&adc1 {
+	vref-supply = <&reg_vdda_1v8>;
+};
+
+/* Ethernet */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
+			  <&clk IMX93_CLK_ENET_REF>,
+			  <&clk IMX93_CLK_ENET_REF_PHY>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+	assigned-clock-rates = <100000000>, <50000000>, <50000000>;
+	status = "okay";
+
+	mdio: mdio {
+		clock-frequency = <5000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+			reset-assert-us = <30>;
+		};
+	};
+};
+
+/* I2C3 */
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC";
+				regulator-min-microvolt = <610000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "VDDQ_0V6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3V3_BUCK";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "VDD_1V1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "PMIC_SNVS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "VDD_0V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&buck4>;
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+/* Watchdog */
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x50e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x502
+			/* the three pins below are connected to PHYs straps,
+			 * that is what the pull-up/down setting is for.
+			 */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x37e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x37e
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x50e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x50e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x50e
+			MX93_PAD_ENET2_TD2__ENET1_TX_CLK		0x4000050e
+			MX93_PAD_ENET2_RXC__GPIO4_IO23			0x51e
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SDA__GPIO1_IO01		0x11e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD3__GPIO4_IO27		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x179e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001386
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001386
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001386
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001386
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001386
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001386
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001386
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17be
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000139e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000139e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013be
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000139e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000139e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000139e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000139e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000139e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17be
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000139e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000139e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013be
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013be
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013be
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013be
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013be
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013be
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013be
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
new file mode 100644
index 000000000000..2673d9dccbf4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
@@ -0,0 +1,760 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx93-tqma9352.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa91xxCA starter kit";
+	compatible = "tq,imx93-tqma9352-mba91xxca", "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm2 2 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+			};
+		};
+	};
+
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&expander2 4 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <10000 1>;
+		fan-supply = <&reg_12v0>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		powerdown-gpios = <&expander2 3 GPIO_ACTIVE_LOW>;
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+				};
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_active: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&cpu_active>;
+					cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "PMIC_IRQ#",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "USB_C_ALERT#", "BM2_LCD_INT#",
+		/* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* 00 */ "SD2_CD#", "", "", "",
+		/* 04 */ "", "", "", "SD2_RST#",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "TEMP_EVENT_MOD#", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		temp-event-mod-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "TEMP_EVENT_MOD#";
+		};
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-low states, the signal
+		 * is inactive, e.g. not power down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-low states, the signal
+		 * is inactive, e.g. not disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-low states, the signal
+		 * is inactive, e.g. not in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "LVDS_SHDN#",
+				  "FAN_PWR_EN", "",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	interrupt-parent = <&expander0>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&tpm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET1_MDC__ENET_QOS_MDC				0x51e>,
+			   /* SION | HYS | ODE | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO				0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000>,
+			   <MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000>,
+			   <MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x1000>,
+			   <MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x1000>,
+			   <MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x51e>,
+			   <MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x51e>,
+			   <MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x51e>,
+			   <MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x51e>,
+			   <MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_CCM_CLKO1__GPIO3_IO26			0x1000>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e>,
+			   /* SION | HYS | ODE | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0			0x1000>,
+			   <MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1			0x1000>,
+			   <MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2			0x1000>,
+			   <MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3			0x1000>,
+			   <MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL		0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC			0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0			0x51e>,
+			   <MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1			0x51e>,
+			   <MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2			0x51e>,
+			   <MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3			0x51e>,
+			   <MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL		0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC			0x58e>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x1000>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = /* HYS | PU | FSEL_0 | DSE no drive */
+			   <MX93_PAD_PDM_BIT_STREAM0__CAN1_RX		0x1200>,
+			   /* PU | FSEL_3 | DSE X4 */
+			   <MX93_PAD_PDM_CLK__CAN1_TX			0x039e>;
+	};
+
+	pinctrl_jtag: jtaggrp {
+		fsl,pins = <MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK	0x051e>,
+			   <MX93_PAD_DAP_TDI__JTAG_MUX_TDI		0x1200>,
+			   <MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO	0x031e>,
+			   <MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS	0x1200>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = /* SION | HYS | OD | FSEL_3 | DSE X4 */
+			   <MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x4000199e>,
+			   <MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x4000199e>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX93_PAD_SAI1_RXD0__GPIO1_IO14		0x1000>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_SAI1_TXC__GPIO1_IO12		0x1000>;
+	};
+
+	pinctrl_rgbdisp: rgbdispgrp {
+		fsl,pins = <MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK	0x31e>,
+			   <MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE	0x31e>,
+			   <MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC	0x31e>,
+			   <MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC	0x31e>,
+			   <MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00	0x31e>,
+			   <MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01	0x31e>,
+			   <MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02	0x31e>,
+			   <MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03	0x31e>,
+			   <MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04	0x31e>,
+			   <MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05	0x31e>,
+			   <MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06	0x31e>,
+			   <MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07	0x31e>,
+			   <MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08	0x31e>,
+			   <MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09	0x31e>,
+			   <MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10	0x31e>,
+			   <MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11	0x31e>,
+			   <MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12	0x31e>,
+			   <MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13	0x31e>,
+			   <MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14	0x31e>,
+			   <MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15	0x31e>,
+			   <MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16	0x31e>,
+			   <MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17	0x31e>,
+			   <MX93_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18	0x31e>,
+			   <MX93_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19	0x31e>,
+			   <MX93_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20	0x31e>,
+			   <MX93_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21	0x31e>,
+			   <MX93_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22	0x31e>,
+			   <MX93_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23	0x31e>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_SAI1_TXFS__GPIO1_IO11		0x1000>;
+	};
+
+	pinctrl_tpm2: tpm2grp {
+		fsl,pins = <MX93_PAD_I2C2_SCL__TPM2_CH2			0x57e>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10	0x1000>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_UART1_RXD__LPUART1_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX93_PAD_UART1_TXD__LPUART1_TX		0x011e>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_UART2_RXD__LPUART2_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX93_PAD_UART2_TXD__LPUART2_TX		0x011e>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX93_PAD_SAI1_TXD0__LPUART2_RTS_B		0x011e>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_SD2_CD_B__GPIO3_IO00		0x1000>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X5 */
+			   <MX93_PAD_SD2_CLK__USDHC2_CLK		0x05be>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   /* HYS | PU | FSEL_3 | DSE X3 */
+			   <MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e>,
+			   <MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e>,
+			   <MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e>,
+			   <MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X6 */
+			   <MX93_PAD_SD2_CLK__USDHC2_CLK		0x05fe>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   <MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000139e>,
+			   <MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000139e>,
+			   <MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000139e>,
+			   <MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000139e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
new file mode 100644
index 000000000000..4760d07ea24b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -0,0 +1,930 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx93-tqma9352.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa93xxCA starter kit";
+	compatible = "tq,imx93-tqma9352-mba93xxca",
+		     "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm5 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwmfan>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&tpm6 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_12v0>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_active0: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+
+				cpu_active1: trip-active1 {
+					temperature = <48000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+
+				cpu_active2: trip-active2 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&cpu_active0>;
+					cooling-device = <&fan0 1 1>;
+				};
+
+				map2 {
+					trip = <&cpu_active1>;
+					cooling-device = <&fan0 2 2>;
+				};
+
+				map3 {
+					trip = <&cpu_active2>;
+					cooling-device = <&fan0 3 3>;
+				};
+			};
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 00 */ "", "", "USB_C_ALERT#", "PMIC_IRQ#",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "BM2_TEMP_EVENT_MOD#",
+		/* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+
+	expander-irq-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "PEX_INT#";
+	};
+
+	tcpc-irq-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "USB_C_ALERT#";
+	};
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+
+	gpio-line-names =
+		/* 00 */ "SPI6_PCS0#", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "FAN_RPM", "MIPI_CSI_TRIGGER", "MIPI_CSI_SYNC",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "X1_11", "X1_21", "X1_17", "X1_13",
+		/* 20 */ "X1_15", "X1_9", "", "",
+		/* 24 */ "", "", "X1_7", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* 00 */ "SD2_CD#", "", "", "",
+		/* 04 */ "", "", "", "SD2_RST#",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "DP_INT", "", "";
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "FAN_PWR_EN", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the WiFi card's low-active power down pin.
+		 * The output-low states, the signal is inactive,
+		 * resulting in high signal at power-down pin
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card's low-active disable pin.
+		 * The output-low states, the signal is inactive,
+		 * resulting in high signal at power-down pin
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card's reset pin.
+		 * The output-low states, the signal is inactive,
+		 * resulting in high signal at power-down pin
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "DP_EN",
+				  "MIPI_CSI_EN", "MIPI_CSI_RST#",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpi2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5>;
+	status = "okay";
+};
+
+&lpspi6 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpspi6>;
+	pinctrl-1 = <&pinctrl_lpspi6>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* disabled per default, console for M33 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&lpuart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_temp_sensor_som>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&tpm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm6>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	hub_2_0: usb-hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x51e
+			/* SION | HYS | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x4000111e
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x1000
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x1000
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x1000
+			/* HYS | PD | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x1400
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x51e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x51e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+		>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26			0x1000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
+			/* SION | HYS | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000111e
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x1000
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x1000
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x1000
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x1000
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x1000
+			/* HYS | PD | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x1400
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x51e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x51e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x51e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x51e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
+		>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x1000
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			/* HYS | PU | FSEL_0 | DSE no drive */
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX		0x1200
+			/* PU | FSEL_3 | DSE X4 */
+			MX93_PAD_PDM_CLK__CAN1_TX			0x039e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			/* HYS | PU | FSEL_0 | DSE no drive */
+			MX93_PAD_GPIO_IO27__CAN2_RX			0x1200
+			/* PU | FSEL_3 | DSE X4 */
+			MX93_PAD_GPIO_IO25__CAN2_TX			0x039e
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			/* HYS | PD | FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO16__GPIO2_IO16			0x151e
+			MX93_PAD_GPIO_IO17__GPIO2_IO17			0x151e
+			MX93_PAD_GPIO_IO18__GPIO2_IO18			0x151e
+			MX93_PAD_GPIO_IO19__GPIO2_IO19			0x151e
+			MX93_PAD_GPIO_IO20__GPIO2_IO20			0x151e
+			MX93_PAD_GPIO_IO21__GPIO2_IO21			0x151e
+			MX93_PAD_GPIO_IO26__GPIO2_IO26			0x151e
+		>;
+	};
+
+	pinctrl_jtag: jtaggrp {
+		fsl,pins = <
+			MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK		0x051e
+			MX93_PAD_DAP_TDI__JTAG_MUX_TDI			0x1200
+			MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO		0x031e
+			MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS		0x1200
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			/* SION | HYS | OD | FSEL_3 | DSE X4 */
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x4000199e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x4000199e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			/* SION | HYS | OD | FSEL_3 | DSE X4 */
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA			0x4000199e
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL			0x4000199e
+		>;
+	};
+
+	pinctrl_lpspi6: lpspi6grp {
+		fsl,pins = <
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO00__LPSPI6_PCS0			0x011e
+			/* HYS | PD | FSEL_0 | DSE no drive */
+			MX93_PAD_GPIO_IO01__LPSPI6_SIN			0x1400
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO02__LPSPI6_SOUT			0x051e
+			MX93_PAD_GPIO_IO03__LPSPI6_SCK			0x051e
+		>;
+	};
+
+	pinctrl_mipi_csi: mipicsigrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3		0x051e /* MCLK */
+			MX93_PAD_GPIO_IO10__GPIO2_IO10			0x051e /* TRIGGER */
+			MX93_PAD_GPIO_IO11__GPIO2_IO11			0x1400 /* SYNC */
+		>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_RXD0__GPIO1_IO14			0x1000
+		>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_SAI1_TXC__GPIO1_IO12			0x1000
+		>;
+	};
+
+	pinctrl_pwmfan: pwmfangrp {
+		fsl,pins = <
+			/* HYS | PU | FSEL_0 | no DSE */
+			MX93_PAD_GPIO_IO09__GPIO2_IO09			0x1200
+		>;
+	};
+
+	pinctrl_tc9595: tc9595-grp {
+		fsl,pins = <
+			/* HYS | PD | FSEL_0 | no DSE */
+			MX93_PAD_CCM_CLKO4__GPIO4_IO29			0x1400
+		>;
+	};
+
+	pinctrl_temp_sensor_som: tempsensorsomgrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | no DSE */
+			MX93_PAD_SAI1_TXFS__GPIO1_IO11			0x1000
+		>;
+	};
+
+	pinctrl_tpm5: tpm5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO06__TPM5_CH0			0x57e
+		>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO08__TPM6_CH0			0x57e
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_I2C2_SCL__GPIO1_IO02			0x1000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x011e
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_UART2_RXD__LPUART2_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_UART2_TXD__LPUART2_TX			0x011e
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B		0x011e
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_GPIO_IO15__LPUART3_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO14__LPUART3_TX			0x011e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_GPIO_IO05__LPUART6_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO04__LPUART6_TX			0x011e
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_GPIO_IO13__LPUART8_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO12__LPUART8_TX			0x011e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x1000
+		>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = <
+			/* PD | FSEL_3 | DSE X5 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x05be
+			/* HYS | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x4000139e
+			/* HYS | PU | FSEL_3 | DSE X3 */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e
+			/* FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x010e
+		>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = <
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x05fe
+			/* HYS | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000139e
+			/* FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x010e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 3c5c67ebee5d..8a88c98ac05a 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
- * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
  * D-82229 Seefeld, Germany.
  * Author: Markus Niebel
  * Author: Alexander Stein
@@ -18,6 +18,7 @@
 	model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC";
 	compatible = "tq,imx93-tqma9352-mba93xxla",
 		     "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
 
 	chosen {
 		stdout-path = &lpuart1;
@@ -25,8 +26,35 @@
 
 	aliases {
 		eeprom0 = &eeprom0;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
 		rtc0 = &pcf85063;
 		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
 	};
 
 	backlight_lvds: backlight {
@@ -206,6 +234,16 @@
 };
 
 &gpio1 {
+	gpio-line-names =
+		/* 00 */ "", "", "USB_C_ALERT#", "PMIC_IRQ#",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "BM2_TEMP_EVENT_MOD#",
+		/* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+
 	expander-irq-hog {
 		gpio-hog;
 		gpios = <12 GPIO_ACTIVE_LOW>;
@@ -221,19 +259,63 @@
 	};
 };
 
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "AFE_RESET#",
+		/* 08 */ "AFE_SYNC", "AFE_DRDY", "MIPI_CSI_TRIGGER", "MIPI_CSI_SYNC",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "X1_19", "X1_29", "X1_25", "X1_21",
+		/* 20 */ "X1_23", "X1_17", "", "",
+		/* 24 */ "AFE_INT#", "", "X1_15", "",
+		/* 28 */ "", "", "", "";
+};
+
 &gpio3 {
+	gpio-line-names =
+		/* 00 */ "SD2_CD#", "", "", "",
+		/* 04 */ "", "", "", "SD2_RST#",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+		/* 28 */ "", "", "", "";
+
 	ethphy-eqos-irq-hog {
 		gpio-hog;
 		gpios = <26 GPIO_ACTIVE_LOW>;
 		input;
-		line-name = "ENET0_IRQ#";
+		line-name = "ENET1_INT#";
 	};
 
 	ethphy-fec-irq-hog {
 		gpio-hog;
 		gpios = <27 GPIO_ACTIVE_LOW>;
 		input;
-		line-name = "ENET1_IRQ#";
+		line-name = "ENET2_INT#";
+	};
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "DP_INT", "", "";
+
+	dp-int-hog {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "DP_INT";
 	};
 };
 
@@ -251,6 +333,32 @@
 		reg = <0x1c>;
 	};
 
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
 	eeprom2: eeprom@54 {
 		compatible = "nxp,se97b", "atmel,24c02";
 		reg = <0x54>;
@@ -344,7 +452,7 @@
 		#gpio-cells = <2>;
 		vcc-supply = <&reg_3v3>;
 		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
-				  "LCD_BL_EN", "DP_EN",
+				  "LCD_BLT_EN", "DP_EN",
 				  "MIPI_CSI_EN", "MIPI_CSI_RST#",
 				  "USER_LED1", "USER_LED2";
 	};
@@ -387,6 +495,13 @@
 	};
 };
 
+&lpspi6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi6>, <&pinctrl_lpspi6_cs>;
+	cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &lpuart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -420,24 +535,67 @@
 };
 
 &pcf85063 {
-	/* RTC_EVENT# is connected on MBa93xxLA */
+	/* RTC_EVENT# from SoM is connected on mainboard */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcf85063>;
 	interrupt-parent = <&gpio1>;
 	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
 };
 
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_temp_sensor_som>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &tpm5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tpm5>;
 };
 
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	hub_2_0: usb-hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
 	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
 	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
-	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	bus-width = <4>;
 	no-sdio;
@@ -447,25 +605,39 @@
 };
 
 &iomuxc {
+	pinctrl_afe: afegrp {
+		fsl,pins = <
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO07__GPIO2_IO07			0x011e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO08__GPIO2_IO08			0x051e
+			/* HYS | PD */
+			MX93_PAD_GPIO_IO09__GPIO2_IO09			0x1400
+			/* HYS */
+			MX93_PAD_GPIO_IO24__GPIO2_IO24			0x1000
+		>;
+	};
+
 	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
 			/* PD | FSEL_2 | DSE X4 */
-			MX93_PAD_ENET1_MDC__ENET_QOS_MDC		0x51e
-			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO		0x4000051e
-			/* PD | FSEL_2 | DSE X6 */
-			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e
-			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e
-			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2		0x57e
-			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3		0x57e
-			/* PD | FSEL_3 | DSE X6 */
-			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
-			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x51e
+			/* SION | HYS | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x4000111e
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x1000
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x1000
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x1000
+			/* HYS | PD | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x1400
 			/* PD | FSEL_2 | DSE X4 */
-			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x51e
-			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x51e
-			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2		0x51e
-			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3		0x51e
-			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x51e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x51e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x51e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x51e
 			/* PD | FSEL_3 | DSE X3 */
 			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
 		>;
@@ -473,7 +645,8 @@
 
 	pinctrl_eqos_phy: eqosphygrp {
 		fsl,pins = <
-			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x1306
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26			0x1000
 		>;
 	};
 
@@ -481,15 +654,16 @@
 		fsl,pins = <
 			/* PD | FSEL_2 | DSE X4 */
 			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
-			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000051e
-			/* PD | FSEL_2 | DSE X6 */
-			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
-			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
-			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
-			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
-			/* PD | FSEL_3 | DSE X6 */
-			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
-			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			/* SION | HYS | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000111e
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x1000
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x1000
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x1000
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x1000
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x1000
+			/* HYS | PD | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x1400
 			/* PD | FSEL_2 | DSE X4 */
 			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x51e
 			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x51e
@@ -503,139 +677,216 @@
 
 	pinctrl_fec_phy: fecphygrp {
 		fsl,pins = <
-			MX93_PAD_CCM_CLKO2__GPIO3_IO27		0x1306
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x1000
 		>;
 	};
 
 	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
-			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
-			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+			/* HYS | PU | FSEL_0 | DSE no drive */
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX		0x1200
+			/* PU | FSEL_3 | DSE X4 */
+			MX93_PAD_PDM_CLK__CAN1_TX			0x039e
 		>;
 	};
 
 	pinctrl_flexcan2: flexcan2grp {
 		fsl,pins = <
-			MX93_PAD_GPIO_IO25__CAN2_TX		0x139e
-			MX93_PAD_GPIO_IO27__CAN2_RX		0x139e
+			/* HYS | PU | FSEL_0 | DSE no drive */
+			MX93_PAD_GPIO_IO27__CAN2_RX			0x1200
+			/* PU | FSEL_3 | DSE X4 */
+			MX93_PAD_GPIO_IO25__CAN2_TX			0x039e
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			/* HYS | PD | FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO16__GPIO2_IO16			0x151e
+			MX93_PAD_GPIO_IO17__GPIO2_IO17			0x151e
+			MX93_PAD_GPIO_IO18__GPIO2_IO18			0x151e
+			MX93_PAD_GPIO_IO19__GPIO2_IO19			0x151e
+			MX93_PAD_GPIO_IO20__GPIO2_IO20			0x151e
+			MX93_PAD_GPIO_IO21__GPIO2_IO21			0x151e
+			MX93_PAD_GPIO_IO26__GPIO2_IO26			0x151e
+		>;
+	};
+
+	pinctrl_jtag: jtaggrp {
+		fsl,pins = <
+			MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK		0x051e
+			MX93_PAD_DAP_TDI__JTAG_MUX_TDI			0x1200
+			MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO		0x031e
+			MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS		0x1200
 		>;
 	};
 
 	pinctrl_lpi2c3: lpi2c3grp {
 		fsl,pins = <
-			MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
-			MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
+			/* SION | HYS | OD | FSEL_3 | DSE X4 */
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x4000199e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x4000199e
 		>;
 	};
 
 	pinctrl_lpi2c5: lpi2c5grp {
 		fsl,pins = <
-			MX93_PAD_GPIO_IO22__LPI2C5_SDA		0x40000b9e
-			MX93_PAD_GPIO_IO23__LPI2C5_SCL		0x40000b9e
+			/* SION | HYS | OD | FSEL_3 | DSE X4 */
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA			0x4000199e
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL			0x4000199e
+		>;
+	};
+
+	pinctrl_lpspi6: lpspi6grp {
+		fsl,pins = <
+			/* HYS | PD | FSEL_0 | DSE no drive */
+			MX93_PAD_GPIO_IO01__LPSPI6_SIN			0x1400
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO02__LPSPI6_SOUT			0x051e
+			MX93_PAD_GPIO_IO03__LPSPI6_SCK			0x051e
+		>;
+	};
+
+	pinctrl_lpspi6_cs: lpspi6csgrp {
+		fsl,pins = <
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO00__GPIO2_IO00			0x011e
+		>;
+	};
+
+	pinctrl_mipi_csi: mipicsigrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3		0x051e /* MCLK */
+			MX93_PAD_GPIO_IO10__GPIO2_IO10			0x051e /* TRIGGER */
+			MX93_PAD_GPIO_IO11__GPIO2_IO11			0x1400 /* SYNC */
 		>;
 	};
 
 	pinctrl_pcf85063: pcf85063grp {
 		fsl,pins = <
-			MX93_PAD_SAI1_RXD0__GPIO1_IO14		0x1306
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_SAI1_RXD0__GPIO1_IO14			0x1000
 		>;
 	};
 
 	pinctrl_pexp_irq: pexpirqgrp {
 		fsl,pins = <
-			MX93_PAD_SAI1_TXC__GPIO1_IO12		0x1306
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_SAI1_TXC__GPIO1_IO12			0x1000
 		>;
 	};
 
 	pinctrl_tc9595: tc9595-grp {
 		fsl,pins = <
-			/* DP_IRQ */
-			MX93_PAD_CCM_CLKO4__GPIO4_IO29		0x1306
+			/* HYS | PD | FSEL_0 | no DSE */
+			MX93_PAD_CCM_CLKO4__GPIO4_IO29			0x1400
+		>;
+	};
+
+	pinctrl_temp_sensor_som: tempsensorsomgrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | no DSE */
+			MX93_PAD_SAI1_TXFS__GPIO1_IO11			0x1000
 		>;
 	};
 
 	pinctrl_tpm5: tpm5grp {
 		fsl,pins = <
-			MX93_PAD_GPIO_IO06__TPM5_CH0		0x57e
+			MX93_PAD_GPIO_IO06__TPM5_CH0			0x57e
 		>;
 	};
 
 	pinctrl_typec: typecgrp {
 		fsl,pins = <
-			MX93_PAD_I2C2_SCL__GPIO1_IO02		0x1306
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_I2C2_SCL__GPIO1_IO02			0x1000
 		>;
 	};
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
-			MX93_PAD_UART1_TXD__LPUART1_TX		0x31e
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x011e
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX93_PAD_UART2_TXD__LPUART2_TX		0x31e
-			MX93_PAD_UART2_RXD__LPUART2_RX		0x31e
-			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B	0x51e
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_UART2_RXD__LPUART2_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_UART2_TXD__LPUART2_TX			0x011e
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B		0x011e
 		>;
 	};
 
 	pinctrl_uart3: uart3grp {
 		fsl,pins = <
-			MX93_PAD_GPIO_IO14__LPUART3_TX		0x31e
-			MX93_PAD_GPIO_IO15__LPUART3_RX		0x31e
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_GPIO_IO15__LPUART3_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO14__LPUART3_TX			0x011e
 		>;
 	};
 
 	pinctrl_uart6: uart6grp {
 		fsl,pins = <
-			MX93_PAD_GPIO_IO04__LPUART6_TX		0x31e
-			MX93_PAD_GPIO_IO05__LPUART6_RX		0x31e
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_GPIO_IO05__LPUART6_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO04__LPUART6_TX			0x011e
 		>;
 	};
 
 	pinctrl_uart8: uart8grp {
 		fsl,pins = <
-			MX93_PAD_GPIO_IO12__LPUART8_TX		0x31e
-			MX93_PAD_GPIO_IO13__LPUART8_RX		0x31e
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_GPIO_IO13__LPUART8_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO12__LPUART8_TX			0x011e
 		>;
 	};
 
 	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
 		fsl,pins = <
-			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x1000
 		>;
 	};
 
+	/* enable SION for data and cmd pad due to ERR052021 */
 	pinctrl_usdhc2_hs: usdhc2hsgrp {
 		fsl,pins = <
-			/* HYS | PD | PU | FSEL_3 | DSE X5 */
-			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17be
-			/* HYS | PD | PU | FSEL_3 | DSE X4 */
-			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
-			/* HYS | PD | PU | FSEL_3 | DSE X3 */
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
-			/* PD | PU | FSEL_2 | DSE X3 */
-			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+			/* PD | FSEL_3 | DSE X5 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x05be
+			/* HYS | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x4000139e
+			/* HYS | PU | FSEL_3 | DSE X3 */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e
+			/* FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x010e
 		>;
 	};
 
+	/* enable SION for data and cmd pad due to ERR052021 */
 	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
 		fsl,pins = <
-			/* HYS | PD | PU | FSEL_3 | DSE X6 */
-			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17fe
-			/* HYS | PD | PU | FSEL_3 | DSE X4 */
-			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x139e
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x139e
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x139e
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
-			/* PD | PU | FSEL_2 | DSE X3 */
-			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x05fe
+			/* HYS | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000139e
+			/* FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x010e
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
index f6e422dc2663..82914ca148d3 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
- * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
  * D-82229 Seefeld, Germany.
  * Author: Markus Niebel
  */
@@ -11,6 +11,12 @@
 	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA SOM";
 	compatible = "tq,imx93-tqma9352", "fsl,imx93";
 
+	memory@80000000 {
+		device_type = "memory";
+		/* our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -19,26 +25,12 @@
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
-			alloc-ranges = <0 0x60000000 0 0x40000000>;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
 			size = <0 0x10000000>;
 			linux,cma-default;
 		};
 	};
 
-	reg_v1v8: regulator-v1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_v3v3: regulator-v3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
 	/* SD2 RST# via PMIC SW_EN */
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
@@ -47,14 +39,14 @@
 		regulator-name = "VSD_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vin-supply = <&reg_v3v3>;
+		vin-supply = <&buck4>;
 		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
 
 &adc1 {
-	vref-supply = <&reg_v1v8>;
+	vref-supply = <&buck5>;
 };
 
 &flexspi1 {
@@ -75,15 +67,12 @@
 		spi-max-frequency = <62000000>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
-	};
-};
 
-&gpio1 {
-	pmic-irq-hog {
-		gpio-hog;
-		gpios = <3 GPIO_ACTIVE_LOW>;
-		input;
-		line-name = "PMIC_IRQ#";
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
@@ -99,6 +88,91 @@
 		reg = <0x1b>;
 	};
 
+	pca9451a: pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9451>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V8_SOC - hw developer guide: 0.75 .. 0.9 */
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_DDRQ - 0.6 V for LPDDR4X */
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <600000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_3V3 - EEPROM, RTC, ... */
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 - SPI NOR, eMMC, RAM VDD1... */
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 - RAM VDD2*/
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_BBSM, fix 1.8 */
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V8_ANA */
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_SD2 - 3.3/1.8V USDHC2 io Voltage */
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
 	pcf85063: rtc@51 {
 		compatible = "nxp,pcf85063a";
 		reg = <0x51>;
@@ -110,30 +184,28 @@
 		reg = <0x53>;
 		pagesize = <16>;
 		read-only;
-		vcc-supply = <&reg_v3v3>;
+		vcc-supply = <&buck4>;
 	};
 
 	eeprom1: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
-		vcc-supply = <&reg_v3v3>;
+		vcc-supply = <&buck4>;
 	};
 
 	/* protectable identification memory (part of M24C64-D @57) */
 	eeprom@5f {
-		compatible = "st,24c64", "atmel,24c64";
+		compatible = "atmel,24c64d-wl";
 		reg = <0x5f>;
-		size = <32>;
-		pagesize = <32>;
-		vcc-supply = <&reg_v3v3>;
+		vcc-supply = <&buck4>;
 	};
 
 	imu@6a {
 		compatible = "st,ism330dhcx";
 		reg = <0x6a>;
-		vdd-supply = <&reg_v3v3>;
-		vddio-supply = <&reg_v3v3>;
+		vdd-supply = <&buck4>;
+		vddio-supply = <&buck4>;
 	};
 };
 
@@ -142,6 +214,8 @@
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1>;
 	pinctrl-2 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
 	bus-width = <8>;
 	non-removable;
 	no-sdio;
@@ -152,61 +226,71 @@
 &wdog3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
 	status = "okay";
 };
 
 &iomuxc {
 	pinctrl_flexspi1: flexspi1grp {
 		fsl,pins = <
-			MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B	0x3fe
-			MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK	0x3fe
-			MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00	0x3fe
-			MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01	0x3fe
-			MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02	0x3fe
-			MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03	0x3fe
+			/* FSEL 3  | DSE X6 */
+			MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B	0x01fe
+			MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK	0x01fe
+			/* HYS | PU | FSEL 3  | DSE X6 */
+			MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00	0x13fe
+			MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01	0x13fe
+			/* HYS | FSEL 3  | DSE X6 (external PU) */
+			MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02	0x11fe
+			MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03	0x11fe
 		>;
 	};
 
 	pinctrl_lpi2c1: lpi2c1grp {
 		fsl,pins = <
-			MX93_PAD_I2C1_SCL__LPI2C1_SCL		0x40000b9e
-			MX93_PAD_I2C1_SDA__LPI2C1_SDA		0x40000b9e
+			/* SION | OD | FSEL 3 | DSE X4 */
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL		0x4000199e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA		0x4000199e
 		>;
 	};
 
 	pinctrl_pca9451: pca9451grp {
 		fsl,pins = <
-			MX93_PAD_I2C2_SDA__GPIO1_IO03		0x1306
+			/* HYS | PU */
+			MX93_PAD_I2C2_SDA__GPIO1_IO03		0x1200
 		>;
 	};
 
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
-			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x1306
+			/* FSEL 2 | DSE X2 */
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x106
 		>;
 	};
 
+	/* enable SION for data and cmd pad due to ERR052021 */
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
-			/* HYS | PU | PD | FSEL_3 | X5 */
-			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17be
-			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x17be
-			/* HYS | PU | FSEL_3 | X5 */
-			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13be
-			/* HYS | PU | FSEL_3 | X4 */
-			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x139e
-			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x139e
-			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x139e
-			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x139e
-			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x139e
-			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x139e
-			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x139e
-			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x139e
+			/* PD | FSEL 3 | DSE X5 */
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x5be
+			/* HYS | FSEL 0 | no drive */
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x1000
+			/* HYS | FSEL 3 | X5 */
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400011be
+			/* HYS | FSEL 3 | X4 */
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000119e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000119e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000119e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000119e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000119e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000119e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000119e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000119e
 		>;
 	};
 
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
+			/* PU | FSEL 1 | DSE X4 */
 			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
 		>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
new file mode 100644
index 000000000000..c789c1f24bdc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ * Copyright 2023 Variscite Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "imx93-var-som.dtsi"
+
+/{
+	model = "Variscite VAR-SOM-MX93 on Symphony evaluation board";
+	compatible = "variscite,var-som-mx93-symphony",
+		     "variscite,var-som-mx93", "fsl,imx93";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+	};
+
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	/*
+	 * Needed only for Symphony <= v1.5
+	 */
+	reg_fec_phy: regulator-fec-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ethosu_mem: ethosu-region@88000000 {
+			compatible = "shared-dma-pool";
+			reusable;
+			reg = <0x0 0x88000000 0x0 0x8000000>;
+		};
+
+		vdev0vring0: vdev0vring0@87ee0000 {
+			reg = <0 0x87ee0000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@87ee8000 {
+			reg = <0 0x87ee8000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@87ef0000 {
+			reg = <0 0x87ef0000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@87ef8000 {
+			reg = <0 0x87ef8000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@2021f000 {
+			reg = <0 0x2021f000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@87f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x87f00000 0 0x100000>;
+			no-map;
+		};
+
+		ele_reserved: ele-reserved@87de0000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x87de0000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-back {
+			label = "Back";
+			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/* Use external instead of internal RTC*/
+&bbnsm_rtc {
+	status = "disabled";
+};
+
+&eqos {
+	mdio {
+		ethphy1: ethernet-phy@5 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <5>;
+			qca,disable-smarteee;
+			eee-broken-1000t;
+			reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <20000>;
+			vddio-supply = <&vddio1>;
+
+			vddio1: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec_phy>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1_gpio>;
+	pinctrl-2 = <&pinctrl_lpi2c1_gpio>;
+	scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	/* DS1337 RTC module */
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&lpi2c5 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5_gpio>;
+	pinctrl-2 = <&pinctrl_lpi2c5_gpio>;
+	scl-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pca9534: gpio@20 {
+		compatible = "nxp,pca9534";
+		reg = <0x20>;
+		gpio-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9534>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		#gpio-cells = <2>;
+		wakeup-source;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* J18.7, J18.9 */
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+/* Watchdog */
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__CAN1_TX                       0x139e
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX               0x139e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL			0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c1_gpio: lpi2c1gpiogrp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__GPIO1_IO00			0x31e
+			MX93_PAD_I2C1_SDA__GPIO1_IO01			0x31e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL			0x40000b9e
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c5_gpio: lpi2c5gpiogrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO23__GPIO2_IO23			0x31e
+			MX93_PAD_GPIO_IO22__GPIO2_IO22			0x31e
+		>;
+	};
+
+	pinctrl_pca9534: pca9534grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO05__LPUART6_RX			0x31e
+			MX93_PAD_GPIO_IO04__LPUART6_TX			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO18__GPIO2_IO18		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
new file mode 100644
index 000000000000..a5f09487d803
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ * Copyright 2023 Variscite Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/{
+	model = "Variscite VAR-SOM-MX93 module";
+	compatible = "variscite,var-som-mx93", "fsl,imx93";
+
+	mmc_pwrseq: mmc-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <10000>;
+		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>,	/* WIFI_RESET */
+			      <&gpio3 7 GPIO_ACTIVE_LOW>;	/* WIFI_PWR_EN */
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	/*
+	 * The required RGMII TX and RX 2ns delays are implemented directly
+	 * in hardware via passive delay elements on the SOM PCB.
+	 * No delay configuration is needed in software via PHY driver.
+	 */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	snps,clk-csr = <5>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <1000000>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			eee-broken-1000t;
+			reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <100000>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+			};
+		};
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x58e
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+			MX93_PAD_UART2_TXD__GPIO1_IO07				0x51e
+		>;
+	};
+
+	pinctrl_reg_eqos_phy: regeqosgrp {
+		fsl,pins = <
+			MX93_PAD_UART2_TXD__GPIO1_IO07			0x51e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 34c0540276d1..7b27012dfcb5 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -1,136 +1,15 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright 2022 NXP
+ * Copyright 2022,2025 NXP
  */
 
-#include <dt-bindings/clock/imx93-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/fsl,imx93-power.h>
-#include <dt-bindings/thermal/thermal.h>
+#include "imx91_93_common.dtsi"
 
-#include "imx93-pinfunc.h"
-
-/ {
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		i2c0 = &lpi2c1;
-		i2c1 = &lpi2c2;
-		i2c2 = &lpi2c3;
-		i2c3 = &lpi2c4;
-		i2c4 = &lpi2c5;
-		i2c5 = &lpi2c6;
-		i2c6 = &lpi2c7;
-		i2c7 = &lpi2c8;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		serial0 = &lpuart1;
-		serial1 = &lpuart2;
-		serial2 = &lpuart3;
-		serial3 = &lpuart4;
-		serial4 = &lpuart5;
-		serial5 = &lpuart6;
-		serial6 = &lpuart7;
-		serial7 = &lpuart8;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		idle-states {
-			entry-method = "psci";
-
-			cpu_pd_wait: cpu-pd-wait {
-				compatible = "arm,idle-state";
-				arm,psci-suspend-param = <0x0010033>;
-				local-timer-stop;
-				entry-latency-us = <10000>;
-				exit-latency-us = <7000>;
-				min-residency-us = <27000>;
-				wakeup-latency-us = <15000>;
-			};
-		};
-
-		A55_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a55";
-			reg = <0x0>;
-			enable-method = "psci";
-			#cooling-cells = <2>;
-			cpu-idle-states = <&cpu_pd_wait>;
-		};
-
-		A55_1: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a55";
-			reg = <0x100>;
-			enable-method = "psci";
-			#cooling-cells = <2>;
-			cpu-idle-states = <&cpu_pd_wait>;
-		};
-
-	};
-
-	osc_32k: clock-osc-32k {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "osc_32k";
-	};
-
-	osc_24m: clock-osc-24m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc_24m";
-	};
-
-	clk_ext1: clock-ext1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <133000000>;
-		clock-output-names = "clk_ext1";
-	};
-
-	pmu {
-		compatible = "arm,cortex-a55-pmu";
-		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <24000000>;
-		arm,no-tick-in-suspend;
-		interrupt-parent = <&gic>;
-	};
-
-	gic: interrupt-controller@48000000 {
-		compatible = "arm,gic-v3";
-		reg = <0 0x48000000 0 0x10000>,
-		      <0 0x48040000 0 0xc0000>;
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&gic>;
+/{
+	cm33: remoteproc-cm33 {
+		compatible = "fsl,imx93-cm33";
+		clocks = <&clk IMX93_CLK_CM33_GATE>;
+		status = "disabled";
 	};
 
 	thermal-zones {
@@ -164,900 +43,119 @@
 			};
 		};
 	};
+};
 
-	cm33: remoteproc-cm33 {
-		compatible = "fsl,imx93-cm33";
-		clocks = <&clk IMX93_CLK_CM33_GATE>;
+&aips1 {
+	mu1: mailbox@44230000 {
+		compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+		reg = <0x44230000 0x10000>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_MU1_B_GATE>;
+		#mbox-cells = <2>;
 		status = "disabled";
 	};
 
-	soc@0 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x0 0x80000000>,
-			 <0x28000000 0x0 0x28000000 0x10000000>;
-
-		aips1: bus@44000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x44000000 0x800000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			edma1: dma-controller@44000000 {
-				compatible = "fsl,imx93-edma3";
-				reg = <0x44000000 0x200000>;
-				#dma-cells = <3>;
-				dma-channels = <31>;
-				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,  //  0: Reserved
-					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,  //  1: CANFD1
-					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,  //  2: Reserved
-					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,  //  3: GPIO1 CH0
-					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,  //  4: GPIO1 CH1
-					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, //  5: I3C1 TO Bus
-					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, //  6: I3C1 From Bus
-					     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, //  7: LPI2C1 M TX
-					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, //  8: LPI2C1 S TX
-					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, //  9: LPI2C2 M RX
-					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, // 10: LPI2C2 S RX
-					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, // 11: LPSPI1 TX
-					     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, // 12: LPSPI1 RX
-					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, // 13: LPSPI2 TX
-					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, // 14: LPSPI2 RX
-					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, // 15: LPTMR1
-					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, // 16: LPUART1 TX
-					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, // 17: LPUART1 RX
-					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, // 18: LPUART2 TX
-					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, // 19: LPUART2 RX
-					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, // 20: S400
-					     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, // 21: SAI TX
-					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, // 22: SAI RX
-					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, // 23: TPM1 CH0/CH2
-					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, // 24: TPM1 CH1/CH3
-					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, // 25: TPM1 Overflow
-					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, // 26: TMP2 CH0/CH2
-					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
-					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
-					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
-					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; // 30: ADC1
-				clocks = <&clk IMX93_CLK_EDMA1_GATE>;
-				clock-names = "dma";
-			};
-
-			aonmix_ns_gpr: syscon@44210000 {
-				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
-				reg = <0x44210000 0x1000>;
-			};
-
-			mu1: mailbox@44230000 {
-				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
-				reg = <0x44230000 0x10000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_MU1_B_GATE>;
-				#mbox-cells = <2>;
-				status = "disabled";
-			};
-
-			system_counter: timer@44290000 {
-				compatible = "nxp,sysctr-timer";
-				reg = <0x44290000 0x30000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&osc_24m>;
-				clock-names = "per";
-				nxp,no-divider;
-			};
-
-			wdog1: watchdog@442d0000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x442d0000 0x10000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG1_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			wdog2: watchdog@442e0000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x442e0000 0x10000>;
-				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG2_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			tpm1: pwm@44310000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x44310000 0x1000>;
-				clocks = <&clk IMX93_CLK_TPM1_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			tpm2: pwm@44320000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x44320000 0x10000>;
-				clocks = <&clk IMX93_CLK_TPM2_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			lpi2c1: i2c@44340000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x44340000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
-					 <&clk IMX93_CLK_BUS_AON>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpi2c2: i2c@44350000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x44350000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
-					 <&clk IMX93_CLK_BUS_AON>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpspi1: spi@44360000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x44360000 0x10000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
-					 <&clk IMX93_CLK_BUS_AON>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpspi2: spi@44370000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x44370000 0x10000>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
-					 <&clk IMX93_CLK_BUS_AON>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpuart1: serial@44380000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x44380000 0x1000>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma1 17 0 1>, <&edma1 16 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart2: serial@44390000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x44390000 0x1000>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma1 19 0 1>, <&edma1 18 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			flexcan1: can@443a0000 {
-				compatible = "fsl,imx93-flexcan";
-				reg = <0x443a0000 0x10000>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_AON>,
-					 <&clk IMX93_CLK_CAN1_GATE>;
-				clock-names = "ipg", "per";
-				assigned-clocks = <&clk IMX93_CLK_CAN1>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
-				assigned-clock-rates = <40000000>;
-				fsl,clk-source = /bits/ 8 <0>;
-				fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>;
-				status = "disabled";
-			};
-
-			iomuxc: pinctrl@443c0000 {
-				compatible = "fsl,imx93-iomuxc";
-				reg = <0x443c0000 0x10000>;
-				status = "okay";
-			};
-
-			bbnsm: bbnsm@44440000 {
-				compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
-				reg = <0x44440000 0x10000>;
-
-				bbnsm_rtc: rtc {
-					compatible = "nxp,imx93-bbnsm-rtc";
-					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				bbnsm_pwrkey: pwrkey {
-					compatible = "nxp,imx93-bbnsm-pwrkey";
-					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-					linux,code = <KEY_POWER>;
-				};
-			};
-
-			clk: clock-controller@44450000 {
-				compatible = "fsl,imx93-ccm";
-				reg = <0x44450000 0x10000>;
-				#clock-cells = <1>;
-				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
-				clock-names = "osc_32k", "osc_24m", "clk_ext1";
-				status = "okay";
-			};
-
-			src: system-controller@44460000 {
-				compatible = "fsl,imx93-src", "syscon";
-				reg = <0x44460000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges;
-
-				mlmix: power-domain@44461800 {
-					compatible = "fsl,imx93-src-slice";
-					reg = <0x44461800 0x400>, <0x44464800 0x400>;
-					#power-domain-cells = <0>;
-					clocks = <&clk IMX93_CLK_ML_APB>,
-						 <&clk IMX93_CLK_ML>;
-				};
-
-				mediamix: power-domain@44462400 {
-					compatible = "fsl,imx93-src-slice";
-					reg = <0x44462400 0x400>, <0x44465800 0x400>;
-					#power-domain-cells = <0>;
-					clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
-						 <&clk IMX93_CLK_MEDIA_APB>;
-				};
-			};
-
-			anatop: anatop@44480000 {
-				compatible = "fsl,imx93-anatop", "syscon";
-				reg = <0x44480000 0x2000>;
-			};
-
-			tmu: tmu@44482000 {
-				compatible = "fsl,qoriq-tmu";
-				reg = <0x44482000 0x1000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_TMC_GATE>;
-				little-endian;
-				fsl,tmu-range = <0x800000da 0x800000e9
-						 0x80000102 0x8000012a
-						 0x80000166 0x800001a7
-						 0x800001b6>;
-				fsl,tmu-calibration = <0x00000000 0x0000000e
-						       0x00000001 0x00000029
-						       0x00000002 0x00000056
-						       0x00000003 0x000000a2
-						       0x00000004 0x00000116
-						       0x00000005 0x00000195
-						       0x00000006 0x000001b2>;
-				#thermal-sensor-cells = <1>;
-			};
-
-
-			adc1: adc@44530000 {
-				compatible = "nxp,imx93-adc";
-				reg = <0x44530000 0x10000>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_ADC1_GATE>;
-				clock-names = "ipg";
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-		};
-
-		aips2: bus@42000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x42000000 0x800000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			edma2: dma-controller@42000000 {
-				compatible = "fsl,imx93-edma4";
-				reg = <0x42000000 0x210000>;
-				#dma-cells = <3>;
-				shared-interrupt;
-				dma-channels = <64>;
-				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_EDMA2_GATE>;
-				clock-names = "dma";
-			};
-
-			wakeupmix_gpr: syscon@42420000 {
-				compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
-				reg = <0x42420000 0x1000>;
-			};
-
-			mu2: mailbox@42440000 {
-				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
-				reg = <0x42440000 0x10000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_MU2_B_GATE>;
-				#mbox-cells = <2>;
-				status = "disabled";
-			};
-
-			wdog3: watchdog@42490000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x42490000 0x10000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG3_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			wdog4: watchdog@424a0000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x424a0000 0x10000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG4_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			wdog5: watchdog@424b0000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x424b0000 0x10000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG5_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			tpm3: pwm@424e0000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x424e0000 0x1000>;
-				clocks = <&clk IMX93_CLK_TPM3_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			tpm4: pwm@424f0000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x424f0000 0x10000>;
-				clocks = <&clk IMX93_CLK_TPM4_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			tpm5: pwm@42500000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x42500000 0x10000>;
-				clocks = <&clk IMX93_CLK_TPM5_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			tpm6: pwm@42510000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x42510000 0x10000>;
-				clocks = <&clk IMX93_CLK_TPM6_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			lpi2c3: i2c@42530000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x42530000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpi2c4: i2c@42540000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x42540000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpspi3: spi@42550000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42550000 0x10000>;
-				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpspi4: spi@42560000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42560000 0x10000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpuart3: serial@42570000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42570000 0x1000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 18 0 1>, <&edma2 17 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart4: serial@42580000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42580000 0x1000>;
-				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 20 0 1>, <&edma2 19 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart5: serial@42590000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42590000 0x1000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 22 0 1>, <&edma2 21 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart6: serial@425a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x425a0000 0x1000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 24 0 1>, <&edma2 23 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			flexcan2: can@425b0000 {
-				compatible = "fsl,imx93-flexcan";
-				reg = <0x425b0000 0x10000>;
-				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_CAN2_GATE>;
-				clock-names = "ipg", "per";
-				assigned-clocks = <&clk IMX93_CLK_CAN2>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
-				assigned-clock-rates = <40000000>;
-				fsl,clk-source = /bits/ 8 <0>;
-				fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>;
-				status = "disabled";
-			};
-
-			flexspi1: spi@425e0000 {
-				compatible = "nxp,imx8mm-fspi";
-				reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>;
-				reg-names = "fspi_base", "fspi_mmap";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>,
-					 <&clk IMX93_CLK_FLEXSPI1_GATE>;
-				clock-names = "fspi_en", "fspi";
-				assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
-				status = "disabled";
-			};
-
-			lpuart7: serial@42690000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42690000 0x1000>;
-				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 88 0 1>, <&edma2 87 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart8: serial@426a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x426a0000 0x1000>;
-				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
-				clock-names = "ipg";
-				dmas =  <&edma2 90 0 1>, <&edma2 89 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpi2c5: i2c@426b0000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x426b0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpi2c6: i2c@426c0000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x426c0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpi2c7: i2c@426d0000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x426d0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpi2c8: i2c@426e0000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x426e0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpspi5: spi@426f0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x426f0000 0x10000>;
-				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpspi6: spi@42700000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42700000 0x10000>;
-				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpspi7: spi@42710000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42710000 0x10000>;
-				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-			lpspi8: spi@42720000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42720000 0x10000>;
-				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				status = "disabled";
-			};
-
-		};
-
-		aips3: bus@42800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x42800000 0x800000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usdhc1: mmc@42850000 {
-				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
-				reg = <0x42850000 0x10000>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_WAKEUP_AXI>,
-					 <&clk IMX93_CLK_USDHC1_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <8>;
-				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step = <2>;
-				status = "disabled";
-			};
-
-			usdhc2: mmc@42860000 {
-				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
-				reg = <0x42860000 0x10000>;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_WAKEUP_AXI>,
-					 <&clk IMX93_CLK_USDHC2_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step = <2>;
-				status = "disabled";
-			};
-
-			fec: ethernet@42890000 {
-				compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
-				reg = <0x42890000 0x10000>;
-				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_ENET1_GATE>,
-					 <&clk IMX93_CLK_ENET1_GATE>,
-					 <&clk IMX93_CLK_ENET_TIMER1>,
-					 <&clk IMX93_CLK_ENET_REF>,
-					 <&clk IMX93_CLK_ENET_REF_PHY>;
-				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
-				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
-						  <&clk IMX93_CLK_ENET_REF>,
-						  <&clk IMX93_CLK_ENET_REF_PHY>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
-							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>,
-							 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
-				assigned-clock-rates = <100000000>, <250000000>, <50000000>;
-				fsl,num-tx-queues = <3>;
-				fsl,num-rx-queues = <3>;
-				fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
-				status = "disabled";
-			};
-
-			eqos: ethernet@428a0000 {
-				compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
-				reg = <0x428a0000 0x10000>;
-				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "macirq", "eth_wake_irq";
-				clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
-					 <&clk IMX93_CLK_ENET_QOS_GATE>,
-					 <&clk IMX93_CLK_ENET_TIMER2>,
-					 <&clk IMX93_CLK_ENET>,
-					 <&clk IMX93_CLK_ENET_QOS_GATE>;
-				clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
-				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>,
-						  <&clk IMX93_CLK_ENET>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
-							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
-				assigned-clock-rates = <100000000>, <250000000>;
-				intf_mode = <&wakeupmix_gpr 0x28>;
-				snps,clk-csr = <0>;
-				status = "disabled";
-			};
-
-			usdhc3: mmc@428b0000 {
-				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
-				reg = <0x428b0000 0x10000>;
-				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_WAKEUP_AXI>,
-					 <&clk IMX93_CLK_USDHC3_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step = <2>;
-				status = "disabled";
-			};
-		};
-
-		gpio2: gpio@43810000 {
-			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
-			reg = <0x43810000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
-				 <&clk IMX93_CLK_GPIO2_GATE>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 4 30>;
-		};
+	tmu: tmu@44482000 {
+		compatible = "fsl,qoriq-tmu";
+		reg = <0x44482000 0x1000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_TMC_GATE>;
+		#thermal-sensor-cells = <1>;
+		little-endian;
+		fsl,tmu-range = <0x800000da 0x800000e9
+				 0x80000102 0x8000012a
+				 0x80000166 0x800001a7
+				 0x800001b6>;
+		fsl,tmu-calibration = <0x00000000 0x0000000e
+				       0x00000001 0x00000029
+				       0x00000002 0x00000056
+				       0x00000003 0x000000a2
+				       0x00000004 0x00000116
+				       0x00000005 0x00000195
+				       0x00000006 0x000001b2>;
+	};
+};
 
-		gpio3: gpio@43820000 {
-			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
-			reg = <0x43820000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
-				 <&clk IMX93_CLK_GPIO3_GATE>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
-				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
-		};
+&aips2 {
+	mu2: mailbox@42440000 {
+		compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+		reg = <0x42440000 0x10000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_MU2_B_GATE>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+};
 
-		gpio4: gpio@43830000 {
-			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
-			reg = <0x43830000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
-				 <&clk IMX93_CLK_GPIO4_GATE>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
-		};
+&cpus {
+	A55_0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a55";
+		reg = <0x0>;
+		enable-method = "psci";
+		#cooling-cells = <2>;
+		cpu-idle-states = <&cpu_pd_wait>;
+		i-cache-size = <32768>;
+		i-cache-line-size = <64>;
+		i-cache-sets = <128>;
+		d-cache-size = <32768>;
+		d-cache-line-size = <64>;
+		d-cache-sets = <128>;
+		next-level-cache = <&l2_cache_l0>;
+	};
 
-		gpio1: gpio@47400000 {
-			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
-			reg = <0x47400000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
-				 <&clk IMX93_CLK_GPIO1_GATE>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 92 16>;
-		};
+	A55_1: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a55";
+		reg = <0x100>;
+		enable-method = "psci";
+		#cooling-cells = <2>;
+		cpu-idle-states = <&cpu_pd_wait>;
+		i-cache-size = <32768>;
+		i-cache-line-size = <64>;
+		i-cache-sets = <128>;
+		d-cache-size = <32768>;
+		d-cache-line-size = <64>;
+		d-cache-sets = <128>;
+		next-level-cache = <&l2_cache_l1>;
+	};
 
-		ocotp: efuse@47510000 {
-			compatible = "fsl,imx93-ocotp", "syscon";
-			reg = <0x47510000 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
+	l2_cache_l0: l2-cache-l0 {
+		compatible = "cache";
+		cache-size = <65536>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <2>;
+		cache-unified;
+		next-level-cache = <&l3_cache>;
+	};
 
-		s4muap: mailbox@47520000 {
-			compatible = "fsl,imx93-mu-s4";
-			reg = <0x47520000 0x10000>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			#mbox-cells = <2>;
-		};
+	l2_cache_l1: l2-cache-l1 {
+		compatible = "cache";
+		cache-size = <65536>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <2>;
+		cache-unified;
+		next-level-cache = <&l3_cache>;
+	};
 
-		media_blk_ctrl: system-controller@4ac10000 {
-			compatible = "fsl,imx93-media-blk-ctrl", "syscon";
-			reg = <0x4ac10000 0x10000>;
-			power-domains = <&mediamix>;
-			clocks = <&clk IMX93_CLK_MEDIA_APB>,
-				 <&clk IMX93_CLK_MEDIA_AXI>,
-				 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
-				 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
-				 <&clk IMX93_CLK_CAM_PIX>,
-				 <&clk IMX93_CLK_PXP_GATE>,
-				 <&clk IMX93_CLK_LCDIF_GATE>,
-				 <&clk IMX93_CLK_ISI_GATE>,
-				 <&clk IMX93_CLK_MIPI_CSI_GATE>,
-				 <&clk IMX93_CLK_MIPI_DSI_GATE>;
-			clock-names = "apb", "axi", "nic", "disp", "cam",
-				      "pxp", "lcdif", "isi", "csi", "dsi";
-			#power-domain-cells = <1>;
-			status = "disabled";
-		};
+	l3_cache: l3-cache {
+		compatible = "cache";
+		cache-size = <262144>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <3>;
+		cache-unified;
+	};
+};
 
-		ddr-pmu@4e300dc0 {
-			compatible = "fsl,imx93-ddr-pmu";
-			reg = <0x4e300dc0 0x200>;
-			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		};
+&src {
+	mlmix: power-domain@44461800 {
+		compatible = "fsl,imx93-src-slice";
+		reg = <0x44461800 0x400>, <0x44464800 0x400>;
+		clocks = <&clk IMX93_CLK_ML_APB>,
+			 <&clk IMX93_CLK_ML>;
+		#power-domain-cells = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx94-clock.h b/arch/arm64/boot/dts/freescale/imx94-clock.h
new file mode 100644
index 000000000000..27e8c0839722
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx94-clock.h
@@ -0,0 +1,193 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+#ifndef __IMX94_CLOCK_H
+#define __IMX94_CLOCK_H
+
+#define IMX94_CLK_EXT				0
+#define IMX94_CLK_32K				1
+#define IMX94_CLK_24M				2
+#define IMX94_CLK_FRO				3
+#define IMX94_CLK_SYSPLL1_VCO			4
+#define IMX94_CLK_SYSPLL1_PFD0_UNGATED		5
+#define IMX94_CLK_SYSPLL1_PFD0			6
+#define IMX94_CLK_SYSPLL1_PFD0_DIV2		7
+#define IMX94_CLK_SYSPLL1_PFD1_UNGATED		8
+#define IMX94_CLK_SYSPLL1_PFD1			9
+#define IMX94_CLK_SYSPLL1_PFD1_DIV2		10
+#define IMX94_CLK_SYSPLL1_PFD2_UNGATED		11
+#define IMX94_CLK_SYSPLL1_PFD2			12
+#define IMX94_CLK_SYSPLL1_PFD2_DIV2		13
+#define IMX94_CLK_AUDIOPLL1_VCO			14
+#define IMX94_CLK_AUDIOPLL1			15
+#define IMX94_CLK_AUDIOPLL2_VCO			16
+#define IMX94_CLK_AUDIOPLL2			17
+#define IMX94_CLK_RESERVED18			18
+#define IMX94_CLK_RESERVED19			19
+#define IMX94_CLK_RESERVED20			20
+#define IMX94_CLK_RESERVED21			21
+#define IMX94_CLK_RESERVED22			22
+#define IMX94_CLK_RESERVED23			23
+#define IMX94_CLK_ENCPLL_VCO			24
+#define IMX94_CLK_ENCPLL_PFD0_UNGATED		25
+#define IMX94_CLK_ENCPLL_PFD0			26
+#define IMX94_CLK_ENCPLL_PFD1_UNGATED		27
+#define IMX94_CLK_ENCPLL_PFD1			28
+#define IMX94_CLK_ARMPLL_VCO			29
+#define IMX94_CLK_ARMPLL_PFD0_UNGATED		30
+#define IMX94_CLK_ARMPLL_PFD0			31
+#define IMX94_CLK_ARMPLL_PFD1_UNGATED		32
+#define IMX94_CLK_ARMPLL_PFD1			33
+#define IMX94_CLK_ARMPLL_PFD2_UNGATED		34
+#define IMX94_CLK_ARMPLL_PFD2			35
+#define IMX94_CLK_ARMPLL_PFD3_UNGATED		36
+#define IMX94_CLK_ARMPLL_PFD3			37
+#define IMX94_CLK_DRAMPLL_VCO			38
+#define IMX94_CLK_DRAMPLL			39
+#define IMX94_CLK_HSIOPLL_VCO			40
+#define IMX94_CLK_HSIOPLL			41
+#define IMX94_CLK_LDBPLL_VCO			42
+#define IMX94_CLK_LDBPLL			43
+#define IMX94_CLK_EXT1				44
+#define IMX94_CLK_EXT2				45
+#define IMX94_CLK_ADC				46
+#define IMX94_CLK_BUSAON			47
+#define IMX94_CLK_CAN1				48
+#define IMX94_CLK_GLITCHFILTER			49
+#define IMX94_CLK_GPT1				50
+#define IMX94_CLK_I3C1SLOW			51
+#define IMX94_CLK_LPI2C1			52
+#define IMX94_CLK_LPI2C2			53
+#define IMX94_CLK_LPSPI1			54
+#define IMX94_CLK_LPSPI2			55
+#define IMX94_CLK_LPTMR1			56
+#define IMX94_CLK_LPUART1			57
+#define IMX94_CLK_LPUART2			58
+#define IMX94_CLK_M33				59
+#define IMX94_CLK_M33SYSTICK			60
+#define IMX94_CLK_PDM				61
+#define IMX94_CLK_SAI1				62
+#define IMX94_CLK_TPM2				63
+#define IMX94_CLK_A55				64
+#define IMX94_CLK_A55MTRBUS			65
+#define IMX94_CLK_A55PERIPH			66
+#define IMX94_CLK_DRAMALT			67
+#define IMX94_CLK_DRAMAPB			68
+#define IMX94_CLK_DISPAPB			69
+#define IMX94_CLK_DISPAXI			70
+#define IMX94_CLK_DISPPIX			71
+#define IMX94_CLK_HSIOACSCAN480M		72
+#define IMX94_CLK_HSIOACSCAN80M			73
+#define IMX94_CLK_HSIO				74
+#define IMX94_CLK_HSIOPCIEAUX			75
+#define IMX94_CLK_HSIOPCIETEST160M		76
+#define IMX94_CLK_HSIOPCIETEST400M		77
+#define IMX94_CLK_HSIOPCIETEST500M		78
+#define IMX94_CLK_HSIOPCIETEST50M		79
+#define IMX94_CLK_HSIOUSBTEST60M		80
+#define IMX94_CLK_BUSM70			81
+#define IMX94_CLK_M70				82
+#define IMX94_CLK_M70SYSTICK			83
+#define IMX94_CLK_BUSM71			84
+#define IMX94_CLK_M71				85
+#define IMX94_CLK_M71SYSTICK			86
+#define IMX94_CLK_BUSNETCMIX			87
+#define IMX94_CLK_ECAT				88
+#define IMX94_CLK_ENET				89
+#define IMX94_CLK_ENETPHYTEST200M		90
+#define IMX94_CLK_ENETPHYTEST500M		91
+#define IMX94_CLK_ENETPHYTEST667M		92
+#define IMX94_CLK_ENETREF			93
+#define IMX94_CLK_ENETTIMER1			94
+#define IMX94_CLK_ENETTIMER2			95
+#define IMX94_CLK_ENETTIMER3			96
+#define IMX94_CLK_FLEXIO3			97
+#define IMX94_CLK_FLEXIO4			98
+#define IMX94_CLK_M33SYNC			99
+#define IMX94_CLK_M33SYNCSYSTICK		100
+#define IMX94_CLK_MAC0				101
+#define IMX94_CLK_MAC1				102
+#define IMX94_CLK_MAC2				103
+#define IMX94_CLK_MAC3				104
+#define IMX94_CLK_MAC4				105
+#define IMX94_CLK_MAC5				106
+#define IMX94_CLK_NOCAPB			107
+#define IMX94_CLK_NOC				108
+#define IMX94_CLK_NPUAPB			109
+#define IMX94_CLK_NPU				110
+#define IMX94_CLK_CCMCKO1			111
+#define IMX94_CLK_CCMCKO2			112
+#define IMX94_CLK_CCMCKO3			113
+#define IMX94_CLK_CCMCKO4			114
+#define IMX94_CLK_BISS				115
+#define IMX94_CLK_BUSWAKEUP			116
+#define IMX94_CLK_CAN2				117
+#define IMX94_CLK_CAN3				118
+#define IMX94_CLK_CAN4				119
+#define IMX94_CLK_CAN5				120
+#define IMX94_CLK_ENDAT21			121
+#define IMX94_CLK_ENDAT22			122
+#define IMX94_CLK_ENDAT31FAST			123
+#define IMX94_CLK_ENDAT31SLOW			124
+#define IMX94_CLK_FLEXIO1			125
+#define IMX94_CLK_FLEXIO2			126
+#define IMX94_CLK_GPT2				127
+#define IMX94_CLK_GPT3				128
+#define IMX94_CLK_GPT4				129
+#define IMX94_CLK_HIPERFACE1			130
+#define IMX94_CLK_HIPERFACE1SYNC		131
+#define IMX94_CLK_HIPERFACE2			132
+#define IMX94_CLK_HIPERFACE2SYNC		133
+#define IMX94_CLK_I3C2SLOW			134
+#define IMX94_CLK_LPI2C3			135
+#define IMX94_CLK_LPI2C4			136
+#define IMX94_CLK_LPI2C5			137
+#define IMX94_CLK_LPI2C6			138
+#define IMX94_CLK_LPI2C7			139
+#define IMX94_CLK_LPI2C8			140
+#define IMX94_CLK_LPSPI3			141
+#define IMX94_CLK_LPSPI4			142
+#define IMX94_CLK_LPSPI5			143
+#define IMX94_CLK_LPSPI6			144
+#define IMX94_CLK_LPSPI7			145
+#define IMX94_CLK_LPSPI8			146
+#define IMX94_CLK_LPTMR2			147
+#define IMX94_CLK_LPUART10			148
+#define IMX94_CLK_LPUART11			149
+#define IMX94_CLK_LPUART12			150
+#define IMX94_CLK_LPUART3			151
+#define IMX94_CLK_LPUART4			152
+#define IMX94_CLK_LPUART5			153
+#define IMX94_CLK_LPUART6			154
+#define IMX94_CLK_LPUART7			155
+#define IMX94_CLK_LPUART8			156
+#define IMX94_CLK_LPUART9			157
+#define IMX94_CLK_SAI2				158
+#define IMX94_CLK_SAI3				159
+#define IMX94_CLK_SAI4				160
+#define IMX94_CLK_SWOTRACE			161
+#define IMX94_CLK_TPM4				162
+#define IMX94_CLK_TPM5				163
+#define IMX94_CLK_TPM6				164
+#define IMX94_CLK_USBPHYBURUNIN			165
+#define IMX94_CLK_USDHC1			166
+#define IMX94_CLK_USDHC2			167
+#define IMX94_CLK_USDHC3			168
+#define IMX94_CLK_V2XPK				169
+#define IMX94_CLK_WAKEUPAXI			170
+#define IMX94_CLK_XSPISLVROOT			171
+#define IMX94_CLK_XSPI1				172
+#define IMX94_CLK_XSPI2				173
+#define IMX94_CLK_SEL_EXT			174
+#define IMX94_CLK_SEL_A55C0			175
+#define IMX94_CLK_SEL_A55C1			176
+#define IMX94_CLK_SEL_A55C2			177
+#define IMX94_CLK_SEL_A55C3			178
+#define IMX94_CLK_SEL_A55P			179
+#define IMX94_CLK_SEL_DRAM			180
+#define IMX94_CLK_SEL_TEMPSENSE			181
+#define IMX94_CLK_NPU_CGC			182
+
+#endif /* __IMX94_CLOCK_H */
diff --git a/arch/arm64/boot/dts/freescale/imx94-pinfunc.h b/arch/arm64/boot/dts/freescale/imx94-pinfunc.h
new file mode 100644
index 000000000000..00255db89185
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx94-pinfunc.h
@@ -0,0 +1,1570 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+#ifndef __DTS_IMX94_PINFUNC_H
+#define __DTS_IMX94_PINFUNC_H
+
+/* Drive Strength */
+#define IMX94_DSE_X1		0x2
+#define IMX94_DSE_X2		0x6
+#define IMX94_DSE_X3		0xe
+#define IMX94_DSE_X4		0x1e
+#define IMX94_DSE_X5		0x3e
+#define IMX94_DSE_X6		0x7e
+
+/* Slew Rate */
+#define IMX94_FSEL_FAST		0x180
+#define IMX94_FSEL_SLOW		0x100
+
+/* Pull Up */
+#define IMX94_PU_ENABLE		0x200
+#define IMX94_PU_DISABLE	0x0
+
+/* Pull Down */
+#define IMX94_PD_ENABLE		0x400
+#define IMX94_PD_DISABLE	0x0
+
+/* Open Drain */
+#define IMX94_OD_ENABLE		0x800
+#define IMX94_OD_DISABLE	0x0
+
+/* Schmitt trigger */
+#define IMX94_HYS_SCHMITT	0x1000
+#define IMX94_HYS_NO_SCHMITT	0x0
+
+/*
+ * The pin function ID is a tuple of <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define IMX94_PAD_DAP_TDI__JTAG_MUX_TDI                     0x0000 0x0304 0x092c 0x00 0x00
+#define IMX94_PAD_DAP_TDI__MQS2_LEFT                        0x0000 0x0304 0x0000 0x01 0x00
+#define IMX94_PAD_DAP_TDI__ECAT_LED_ERR                     0x0000 0x0304 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TDI__CAN2_TX                          0x0000 0x0304 0x0000 0x03 0x00
+#define IMX94_PAD_DAP_TDI__SINC_FILTER_GLUE3_BREAK          0x0000 0x0304 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TDI__GPIO4_IO4                        0x0000 0x0304 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TDI__LPUART5_RX                       0x0000 0x0304 0x07bc 0x06 0x00
+#define IMX94_PAD_DAP_TDI__XBAR1_XBAR_INOUT26               0x0000 0x0304 0x0000 0x07 0x00
+
+#define IMX94_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS               0x0004 0x0308 0x0930 0x00 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__CAN5_TX                    0x0004 0x0308 0x0000 0x01 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__GPT_MUX_INOUT10            0x0004 0x0308 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__LPUART8_TX                 0x0004 0x0308 0x07dc 0x03 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__SINC3_MOD_CLK1             0x0004 0x0308 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__GPIO4_IO5                  0x0004 0x0308 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B              0x0004 0x0308 0x0000 0x06 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__XBAR1_XBAR_INOUT27         0x0004 0x0308 0x0000 0x07 0x00
+
+#define IMX94_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK              0x0008 0x030c 0x0928 0x00 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__CAN5_RX                   0x0008 0x030c 0x0688 0x01 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__GPT_MUX_INOUT11           0x0008 0x030c 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__LPUART8_RX                0x0008 0x030c 0x07d8 0x03 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__SINC3_MOD_CLK0            0x0008 0x030c 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__GPIO4_IO6                 0x0008 0x030c 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B             0x0008 0x030c 0x07b8 0x06 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__XBAR1_XBAR_INOUT28        0x0008 0x030c 0x0000 0x07 0x00
+
+#define IMX94_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO            0x000c 0x0310 0x0000 0x00 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT              0x000c 0x0310 0x0000 0x01 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__ECAT_RESET_OUT          0x000c 0x0310 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__CAN2_RX                 0x000c 0x0310 0x067c 0x03 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__SINC3_MOD_CLK2          0x000c 0x0310 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__GPIO4_IO7               0x000c 0x0310 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__LPUART5_TX              0x000c 0x0310 0x07c0 0x06 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__XBAR1_XBAR_INOUT29      0x000c 0x0310 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO00__GPIO2_IO0                      0x0010 0x0314 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO00__I3C2_PUR                       0x0010 0x0314 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO00__XBAR1_XBAR_INOUT39             0x0010 0x0314 0x08d4 0x02 0x00
+#define IMX94_PAD_GPIO_IO00__I3C2_PUR_B                     0x0010 0x0314 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO00__LPSPI6_PCS0                    0x0010 0x0314 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO00__LPUART5_TX                     0x0010 0x0314 0x07c0 0x05 0x01
+#define IMX94_PAD_GPIO_IO00__LPI2C5_SDA                     0x0010 0x0314 0x0740 0x06 0x00
+#define IMX94_PAD_GPIO_IO00__FLEXIO1_FLEXIO0                0x0010 0x0314 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO01__GPIO2_IO1                      0x0014 0x0318 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO01__I3C2_SCL                       0x0014 0x0318 0x0720 0x01 0x00
+#define IMX94_PAD_GPIO_IO01__XBAR1_XBAR_INOUT40             0x0014 0x0318 0x08d8 0x02 0x00
+#define IMX94_PAD_GPIO_IO01__EWM_OUT_B                      0x0014 0x0318 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO01__LPSPI6_SIN                     0x0014 0x0318 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO01__LPUART5_RX                     0x0014 0x0318 0x07bc 0x05 0x01
+#define IMX94_PAD_GPIO_IO01__LPI2C5_SCL                     0x0014 0x0318 0x073c 0x06 0x00
+#define IMX94_PAD_GPIO_IO01__FLEXIO1_FLEXIO1                0x0014 0x0318 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO02__GPIO2_IO2                      0x0018 0x031c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO02__I3C2_SDA                       0x0018 0x031c 0x0724 0x01 0x00
+#define IMX94_PAD_GPIO_IO02__XBAR1_XBAR_INOUT41             0x0018 0x031c 0x08dc 0x02 0x00
+#define IMX94_PAD_GPIO_IO02__GPT_MUX_INOUT1                 0x0018 0x031c 0x0700 0x03 0x00
+#define IMX94_PAD_GPIO_IO02__LPSPI6_SOUT                    0x0018 0x031c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO02__LPUART5_CTS_B                  0x0018 0x031c 0x07b8 0x05 0x01
+#define IMX94_PAD_GPIO_IO02__LPI2C6_SDA                     0x0018 0x031c 0x074c 0x06 0x00
+#define IMX94_PAD_GPIO_IO02__FLEXIO1_FLEXIO2                0x0018 0x031c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO03__GPIO2_IO3                      0x001c 0x0320 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO03__EWM_OUT_B                      0x001c 0x0320 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO03__XBAR1_XBAR_INOUT42             0x001c 0x0320 0x08e0 0x02 0x00
+#define IMX94_PAD_GPIO_IO03__GPT_MUX_INOUT4                 0x001c 0x0320 0x0708 0x03 0x00
+#define IMX94_PAD_GPIO_IO03__LPSPI6_SCK                     0x001c 0x0320 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO03__LPUART5_RTS_B                  0x001c 0x0320 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO03__LPI2C6_SCL                     0x001c 0x0320 0x0748 0x06 0x00
+#define IMX94_PAD_GPIO_IO03__FLEXIO1_FLEXIO3                0x001c 0x0320 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO04__GPIO2_IO4                      0x0020 0x0324 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO04__TPM3_CH0                       0x0020 0x0324 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO04__PDM_CLK                        0x0020 0x0324 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO04__GPT_MUX_INOUT5                 0x0020 0x0324 0x070c 0x03 0x00
+#define IMX94_PAD_GPIO_IO04__LPSPI7_PCS0                    0x0020 0x0324 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO04__LPUART6_TX                     0x0020 0x0324 0x07cc 0x05 0x00
+#define IMX94_PAD_GPIO_IO04__LPI2C6_SDA                     0x0020 0x0324 0x074c 0x06 0x01
+#define IMX94_PAD_GPIO_IO04__FLEXIO1_FLEXIO4                0x0020 0x0324 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO05__GPIO2_IO5                      0x0024 0x0328 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO05__TPM4_CH0                       0x0024 0x0328 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO05__PDM_BIT_STREAM0                0x0024 0x0328 0x0610 0x02 0x00
+#define IMX94_PAD_GPIO_IO05__GPT_MUX_INOUT7                 0x0024 0x0328 0x0714 0x03 0x00
+#define IMX94_PAD_GPIO_IO05__LPSPI7_SIN                     0x0024 0x0328 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO05__LPUART6_RX                     0x0024 0x0328 0x07c8 0x05 0x00
+#define IMX94_PAD_GPIO_IO05__LPI2C6_SCL                     0x0024 0x0328 0x0748 0x06 0x01
+#define IMX94_PAD_GPIO_IO05__FLEXIO1_FLEXIO5                0x0024 0x0328 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO06__GPIO2_IO6                      0x0028 0x032c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO06__TPM5_CH0                       0x0028 0x032c 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO06__PDM_BIT_STREAM1                0x0028 0x032c 0x0614 0x02 0x00
+#define IMX94_PAD_GPIO_IO06__GPT_MUX_INOUT8                 0x0028 0x032c 0x0718 0x03 0x00
+#define IMX94_PAD_GPIO_IO06__LPSPI7_SOUT                    0x0028 0x032c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO06__LPUART6_CTS_B                  0x0028 0x032c 0x07c4 0x05 0x00
+#define IMX94_PAD_GPIO_IO06__LPI2C7_SDA                     0x0028 0x032c 0x0754 0x06 0x00
+#define IMX94_PAD_GPIO_IO06__FLEXIO1_FLEXIO6                0x0028 0x032c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO07__GPIO2_IO7                      0x002c 0x0330 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO07__LPSPI3_PCS1                    0x002c 0x0330 0x0768 0x01 0x00
+#define IMX94_PAD_GPIO_IO07__XBAR1_XBAR_INOUT43             0x002c 0x0330 0x08e4 0x02 0x00
+#define IMX94_PAD_GPIO_IO07__GPT_MUX_INOUT3                 0x002c 0x0330 0x0704 0x03 0x00
+#define IMX94_PAD_GPIO_IO07__LPSPI7_SCK                     0x002c 0x0330 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO07__LPUART6_RTS_B                  0x002c 0x0330 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO07__LPI2C7_SCL                     0x002c 0x0330 0x0750 0x06 0x00
+#define IMX94_PAD_GPIO_IO07__FLEXIO1_FLEXIO7                0x002c 0x0330 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO08__GPIO2_IO8                      0x0030 0x0334 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO08__LPSPI3_PCS0                    0x0030 0x0334 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO08__USDHC2_WP                      0x0030 0x0334 0x0854 0x02 0x00
+#define IMX94_PAD_GPIO_IO08__GPT_MUX_INOUT2                 0x0030 0x0334 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO08__TPM6_CH0                       0x0030 0x0334 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO08__LPUART7_TX                     0x0030 0x0334 0x07d4 0x05 0x00
+#define IMX94_PAD_GPIO_IO08__LPI2C7_SDA                     0x0030 0x0334 0x0754 0x06 0x01
+#define IMX94_PAD_GPIO_IO08__FLEXIO1_FLEXIO8                0x0030 0x0334 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO09__GPIO2_IO9                      0x0034 0x0338 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO09__LPSPI3_SIN                     0x0034 0x0338 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO09__XBAR1_XBAR_INOUT44             0x0034 0x0338 0x08e8 0x02 0x00
+#define IMX94_PAD_GPIO_IO09__GPT_MUX_INOUT0                 0x0034 0x0338 0x06fc 0x03 0x00
+#define IMX94_PAD_GPIO_IO09__TPM3_EXTCLK                    0x0034 0x0338 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO09__LPUART7_RX                     0x0034 0x0338 0x07d0 0x05 0x00
+#define IMX94_PAD_GPIO_IO09__LPI2C7_SCL                     0x0034 0x0338 0x0750 0x06 0x01
+#define IMX94_PAD_GPIO_IO09__FLEXIO1_FLEXIO9                0x0034 0x0338 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO10__GPIO2_IO10                     0x0038 0x033c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO10__LPSPI3_SOUT                    0x0038 0x033c 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO10__XBAR1_XBAR_INOUT45             0x0038 0x033c 0x08ec 0x02 0x00
+#define IMX94_PAD_GPIO_IO10__GPT_MUX_INOUT6                 0x0038 0x033c 0x0710 0x03 0x00
+#define IMX94_PAD_GPIO_IO10__TPM4_EXTCLK                    0x0038 0x033c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO10__LPUART7_CTS_B                  0x0038 0x033c 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO10__LPI2C8_SDA                     0x0038 0x033c 0x075c 0x06 0x00
+#define IMX94_PAD_GPIO_IO10__FLEXIO1_FLEXIO10               0x0038 0x033c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO11__GPIO2_IO11                     0x003c 0x0340 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO11__LPSPI3_SCK                     0x003c 0x0340 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO11__XBAR1_XBAR_INOUT46             0x003c 0x0340 0x08f0 0x02 0x00
+#define IMX94_PAD_GPIO_IO11__GPT_MUX_INOUT9                 0x003c 0x0340 0x071c 0x03 0x00
+#define IMX94_PAD_GPIO_IO11__TPM5_EXTCLK                    0x003c 0x0340 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO11__LPUART7_RTS_B                  0x003c 0x0340 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO11__LPI2C8_SCL                     0x003c 0x0340 0x0758 0x06 0x00
+#define IMX94_PAD_GPIO_IO11__FLEXIO1_FLEXIO11               0x003c 0x0340 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO12__GPIO2_IO12                     0x0040 0x0344 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO12__TPM3_CH2                       0x0040 0x0344 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO12__PDM_BIT_STREAM2                0x0040 0x0344 0x0618 0x02 0x00
+#define IMX94_PAD_GPIO_IO12__FLEXIO1_FLEXIO12               0x0040 0x0344 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO12__LPSPI8_PCS0                    0x0040 0x0344 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO12__LPUART8_TX                     0x0040 0x0344 0x07dc 0x05 0x01
+#define IMX94_PAD_GPIO_IO12__LPI2C8_SDA                     0x0040 0x0344 0x075c 0x06 0x01
+
+#define IMX94_PAD_GPIO_IO13__GPIO2_IO13                     0x0044 0x0348 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO13__TPM4_CH2                       0x0044 0x0348 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO13__PDM_BIT_STREAM3                0x0044 0x0348 0x061c 0x02 0x00
+#define IMX94_PAD_GPIO_IO13__XBAR1_XBAR_INOUT47             0x0044 0x0348 0x08f4 0x03 0x00
+#define IMX94_PAD_GPIO_IO13__LPSPI8_SIN                     0x0044 0x0348 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO13__LPUART8_RX                     0x0044 0x0348 0x07d8 0x05 0x01
+#define IMX94_PAD_GPIO_IO13__LPI2C8_SCL                     0x0044 0x0348 0x0758 0x06 0x01
+#define IMX94_PAD_GPIO_IO13__FLEXIO1_FLEXIO13               0x0044 0x0348 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO14__GPIO2_IO14                     0x0048 0x034c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO14__LPUART10_CTS_B                 0x0048 0x034c 0x078c 0x01 0x00
+#define IMX94_PAD_GPIO_IO14__ECAT_SDA                       0x0048 0x034c 0x062c 0x02 0x00
+#define IMX94_PAD_GPIO_IO14__XBAR1_XBAR_INOUT48             0x0048 0x034c 0x08f8 0x03 0x00
+#define IMX94_PAD_GPIO_IO14__LPSPI8_SOUT                    0x0048 0x034c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO14__LPUART8_CTS_B                  0x0048 0x034c 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO14__LPUART4_TX                     0x0048 0x034c 0x07b4 0x06 0x00
+#define IMX94_PAD_GPIO_IO14__FLEXIO1_FLEXIO14               0x0048 0x034c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO15__GPIO2_IO15                     0x004c 0x0350 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO15__LPUART10_RTS_B                 0x004c 0x0350 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO15__ECAT_SCL                       0x004c 0x0350 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO15__XBAR1_XBAR_INOUT8              0x004c 0x0350 0x087c 0x03 0x00
+#define IMX94_PAD_GPIO_IO15__LPSPI8_SCK                     0x004c 0x0350 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO15__LPUART8_RTS_B                  0x004c 0x0350 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO15__LPUART4_RX                     0x004c 0x0350 0x07b0 0x06 0x00
+#define IMX94_PAD_GPIO_IO15__FLEXIO1_FLEXIO15               0x004c 0x0350 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO16__GPIO2_IO16                     0x0050 0x0354 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO16__LPI2C3_SDA                     0x0050 0x0354 0x0730 0x01 0x00
+#define IMX94_PAD_GPIO_IO16__CAN3_TX                        0x0050 0x0354 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO16__EWM_OUT_B                      0x0050 0x0354 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO16__LPUART11_TX                    0x0050 0x0354 0x079c 0x04 0x00
+#define IMX94_PAD_GPIO_IO16__GPT_MUX_INOUT0                 0x0050 0x0354 0x06fc 0x05 0x01
+#define IMX94_PAD_GPIO_IO16__FLEXPWM4_PWMA0                 0x0050 0x0354 0x06d4 0x06 0x00
+#define IMX94_PAD_GPIO_IO16__XBAR1_XBAR_INOUT30             0x0050 0x0354 0x08b0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO17__GPIO2_IO17                     0x0054 0x0358 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO17__LPI2C3_SCL                     0x0054 0x0358 0x072c 0x01 0x00
+#define IMX94_PAD_GPIO_IO17__CAN3_RX                        0x0054 0x0358 0x0680 0x02 0x00
+#define IMX94_PAD_GPIO_IO17__LPI2C6_HREQ                    0x0054 0x0358 0x0744 0x03 0x00
+#define IMX94_PAD_GPIO_IO17__LPUART11_RX                    0x0054 0x0358 0x0798 0x04 0x00
+#define IMX94_PAD_GPIO_IO17__GPT_MUX_INOUT3                 0x0054 0x0358 0x0704 0x05 0x01
+#define IMX94_PAD_GPIO_IO17__FLEXPWM4_PWMB0                 0x0054 0x0358 0x06e4 0x06 0x00
+#define IMX94_PAD_GPIO_IO17__XBAR1_XBAR_INOUT31             0x0054 0x0358 0x08b4 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO18__GPIO2_IO18                     0x0058 0x035c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO18__LPI2C4_SDA                     0x0058 0x035c 0x0738 0x01 0x00
+#define IMX94_PAD_GPIO_IO18__LPUART10_TX                    0x0058 0x035c 0x0794 0x02 0x00
+#define IMX94_PAD_GPIO_IO18__LPI2C7_HREQ                    0x0058 0x035c 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO18__LPUART11_CTS_B                 0x0058 0x035c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO18__GPT_MUX_INOUT6                 0x0058 0x035c 0x0710 0x05 0x01
+#define IMX94_PAD_GPIO_IO18__FLEXPWM4_PWMA1                 0x0058 0x035c 0x06d8 0x06 0x00
+#define IMX94_PAD_GPIO_IO18__XBAR1_XBAR_INOUT32             0x0058 0x035c 0x08b8 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO19__GPIO2_IO19                     0x005c 0x0360 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO19__LPI2C4_SCL                     0x005c 0x0360 0x0734 0x01 0x00
+#define IMX94_PAD_GPIO_IO19__LPUART10_RX                    0x005c 0x0360 0x0790 0x02 0x00
+#define IMX94_PAD_GPIO_IO19__LPI2C8_HREQ                    0x005c 0x0360 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO19__LPUART11_RTS_B                 0x005c 0x0360 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO19__GPT_MUX_INOUT9                 0x005c 0x0360 0x071c 0x05 0x01
+#define IMX94_PAD_GPIO_IO19__FLEXPWM4_PWMB1                 0x005c 0x0360 0x06e8 0x06 0x00
+#define IMX94_PAD_GPIO_IO19__XBAR1_XBAR_INOUT33             0x005c 0x0360 0x08bc 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO20__GPIO2_IO20                     0x0060 0x0364 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO20__PCIE1_CLKREQ_B                 0x0060 0x0364 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO20__LPUART6_TX                     0x0060 0x0364 0x07cc 0x02 0x01
+#define IMX94_PAD_GPIO_IO20__LPI2C8_SDA                     0x0060 0x0364 0x075c 0x03 0x02
+#define IMX94_PAD_GPIO_IO20__LPSPI4_PCS2                    0x0060 0x0364 0x076c 0x04 0x00
+#define IMX94_PAD_GPIO_IO20__LPSPI3_PCS1                    0x0060 0x0364 0x0768 0x05 0x01
+#define IMX94_PAD_GPIO_IO20__FLEXPWM4_PWMA2                 0x0060 0x0364 0x06dc 0x06 0x00
+#define IMX94_PAD_GPIO_IO20__XBAR1_XBAR_INOUT34             0x0060 0x0364 0x08c0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO21__GPIO2_IO21                     0x0064 0x0368 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO21__SAI2_TX_BCLK                   0x0064 0x0368 0x07f8 0x01 0x00
+#define IMX94_PAD_GPIO_IO21__LPUART6_RX                     0x0064 0x0368 0x07c8 0x02 0x01
+#define IMX94_PAD_GPIO_IO21__LPI2C8_SCL                     0x0064 0x0368 0x0758 0x03 0x02
+#define IMX94_PAD_GPIO_IO21__LPSPI4_PCS1                    0x0064 0x0368 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO21__LPI2C3_HREQ                    0x0064 0x0368 0x0728 0x05 0x00
+#define IMX94_PAD_GPIO_IO21__FLEXPWM4_PWMB2                 0x0064 0x0368 0x06ec 0x06 0x00
+#define IMX94_PAD_GPIO_IO21__XBAR1_XBAR_INOUT35             0x0064 0x0368 0x08c4 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO22__GPIO2_IO22                     0x0068 0x036c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO22__SAI2_MCLK                      0x0068 0x036c 0x07e8 0x01 0x00
+#define IMX94_PAD_GPIO_IO22__LPUART6_CTS_B                  0x0068 0x036c 0x07c4 0x02 0x01
+#define IMX94_PAD_GPIO_IO22__XBAR1_XBAR_INOUT9              0x0068 0x036c 0x0880 0x03 0x00
+#define IMX94_PAD_GPIO_IO22__LPSPI4_PCS0                    0x0068 0x036c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO22__FLEXPWM3_PWMA3                 0x0068 0x036c 0x06b4 0x05 0x00
+#define IMX94_PAD_GPIO_IO22__FLEXPWM4_PWMA3                 0x0068 0x036c 0x06e0 0x06 0x00
+#define IMX94_PAD_GPIO_IO22__SINC4_EMCLK0                   0x0068 0x036c 0x082c 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO23__GPIO2_IO23                     0x006c 0x0370 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO23__PCIE2_CLKREQ_B                 0x006c 0x0370 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO23__LPUART6_RTS_B                  0x006c 0x0370 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO23__XBAR1_XBAR_INOUT10             0x006c 0x0370 0x0884 0x03 0x00
+#define IMX94_PAD_GPIO_IO23__LPSPI4_SIN                     0x006c 0x0370 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO23__FLEXPWM3_PWMB3                 0x006c 0x0370 0x06c4 0x05 0x00
+#define IMX94_PAD_GPIO_IO23__FLEXPWM4_PWMB3                 0x006c 0x0370 0x06f0 0x06 0x00
+#define IMX94_PAD_GPIO_IO23__SINC4_EMBIT0                   0x006c 0x0370 0x0820 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO24__GPIO2_IO24                     0x0070 0x0374 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO24__SAI2_RX_BCLK                   0x0070 0x0374 0x07ec 0x01 0x00
+#define IMX94_PAD_GPIO_IO24__LPUART11_TX                    0x0070 0x0374 0x079c 0x02 0x01
+#define IMX94_PAD_GPIO_IO24__LPI2C3_HREQ                    0x0070 0x0374 0x0728 0x03 0x01
+#define IMX94_PAD_GPIO_IO24__LPSPI4_SOUT                    0x0070 0x0374 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO24__SINC_FILTER_GLUE2_BREAK        0x0070 0x0374 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO24__FLEXPWM4_PWMX0                 0x0070 0x0374 0x06f4 0x06 0x00
+#define IMX94_PAD_GPIO_IO24__XBAR1_XBAR_INOUT36             0x0070 0x0374 0x08c8 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO25__GPIO2_IO25                     0x0074 0x0378 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO25__SAI2_RX_SYNC                   0x0074 0x0378 0x07f4 0x01 0x00
+#define IMX94_PAD_GPIO_IO25__LPUART11_RX                    0x0074 0x0378 0x0798 0x02 0x01
+#define IMX94_PAD_GPIO_IO25__LPI2C4_HREQ                    0x0074 0x0378 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO25__LPSPI4_SCK                     0x0074 0x0378 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO25__SINC_FILTER_GLUE1_BREAK        0x0074 0x0378 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO25__FLEXPWM4_PWMX1                 0x0074 0x0378 0x06f8 0x06 0x00
+#define IMX94_PAD_GPIO_IO25__XBAR1_XBAR_INOUT37             0x0074 0x0378 0x08cc 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO26__GPIO2_IO26                     0x0078 0x037c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO26__LPI2C5_SCL                     0x0078 0x037c 0x073c 0x01 0x01
+#define IMX94_PAD_GPIO_IO26__LPUART12_TX                    0x0078 0x037c 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO26__GPT_MUX_INOUT4                 0x0078 0x037c 0x0708 0x03 0x01
+#define IMX94_PAD_GPIO_IO26__FLEXIO1_3_1_FLEXIO0            0x0078 0x037c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO26__SAI2_RX_DATA0                  0x0078 0x037c 0x07f0 0x05 0x00
+#define IMX94_PAD_GPIO_IO26__FLEXPWM4_PWMX2                 0x0078 0x037c 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO26__XBAR1_XBAR_INOUT38             0x0078 0x037c 0x08d0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO27__GPIO2_IO27                     0x007c 0x0380 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO27__LPI2C5_SDA                     0x007c 0x0380 0x0740 0x01 0x01
+#define IMX94_PAD_GPIO_IO27__LPUART12_RX                    0x007c 0x0380 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO27__GPT_MUX_INOUT5                 0x007c 0x0380 0x070c 0x03 0x01
+#define IMX94_PAD_GPIO_IO27__FLEXIO1_3_1_FLEXIO1            0x007c 0x0380 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO27__SAI2_TX_DATA0                  0x007c 0x0380 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO27__FLEXPWM4_PWMX3                 0x007c 0x0380 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO27__SINC4_MOD_CLK0                 0x007c 0x0380 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO28__GPIO2_IO28                     0x0080 0x0384 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO28__LPI2C6_SCL                     0x0080 0x0384 0x0748 0x01 0x02
+#define IMX94_PAD_GPIO_IO28__LPUART12_CTS_B                 0x0080 0x0384 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO28__GPT_MUX_INOUT7                 0x0080 0x0384 0x0714 0x03 0x01
+#define IMX94_PAD_GPIO_IO28__FLEXIO1_3_1_FLEXIO2            0x0080 0x0384 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO28__SAI2_TX_SYNC                   0x0080 0x0384 0x07fc 0x05 0x00
+#define IMX94_PAD_GPIO_IO28__FLEXPWM1_PWMX2                 0x0080 0x0384 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO28__XBAR1_XBAR_INOUT4              0x0080 0x0384 0x086c 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO29__GPIO2_IO29                     0x0084 0x0388 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO29__LPI2C6_SDA                     0x0084 0x0388 0x074c 0x01 0x02
+#define IMX94_PAD_GPIO_IO29__LPUART12_RTS_B                 0x0084 0x0388 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO29__I3C2_SDA                       0x0084 0x0388 0x0724 0x03 0x01
+#define IMX94_PAD_GPIO_IO29__FLEXIO1_3_1_FLEXIO3            0x0084 0x0388 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO29__FLEXPWM3_PWMX0                 0x0084 0x0388 0x06c8 0x05 0x00
+#define IMX94_PAD_GPIO_IO29__FLEXPWM1_PWMX3                 0x0084 0x0388 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO29__XBAR1_XBAR_INOUT5              0x0084 0x0388 0x0870 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO30__GPIO2_IO30                     0x0088 0x038c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO30__LPIT2_TRIGGER0                 0x0088 0x038c 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO30__LPUART3_TX                     0x0088 0x038c 0x07a8 0x02 0x00
+#define IMX94_PAD_GPIO_IO30__I3C2_PUR                       0x0088 0x038c 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO30__FLEXIO1_3_1_FLEXIO4            0x0088 0x038c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO30__I3C2_PUR_B                     0x0088 0x038c 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO30__FLEXPWM2_PWMX2                 0x0088 0x038c 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO30__XBAR1_XBAR_INOUT6              0x0088 0x038c 0x0874 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO31__GPIO2_IO31                     0x008c 0x0390 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO31__LPIT2_TRIGGER1                 0x008c 0x0390 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO31__LPUART3_RX                     0x008c 0x0390 0x07a4 0x02 0x00
+#define IMX94_PAD_GPIO_IO31__I3C2_SCL                       0x008c 0x0390 0x0720 0x03 0x01
+#define IMX94_PAD_GPIO_IO31__FLEXIO1_3_1_FLEXIO5            0x008c 0x0390 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO31__FLEXPWM3_PWMX1                 0x008c 0x0390 0x06cc 0x05 0x00
+#define IMX94_PAD_GPIO_IO31__FLEXPWM2_PWMX3                 0x008c 0x0390 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO31__XBAR1_XBAR_INOUT7              0x008c 0x0390 0x0878 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO32__GPIO3_IO0                      0x0090 0x0394 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO32__LPIT3_TRIGGER0                 0x0090 0x0394 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO32__LPUART7_TX                     0x0090 0x0394 0x07d4 0x02 0x01
+#define IMX94_PAD_GPIO_IO32__GPT_MUX_INOUT8                 0x0090 0x0394 0x0718 0x03 0x01
+#define IMX94_PAD_GPIO_IO32__FLEXIO1_3_1_FLEXIO6            0x0090 0x0394 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO32__FLEXPWM3_PWMA0                 0x0090 0x0394 0x06a8 0x05 0x00
+#define IMX94_PAD_GPIO_IO32__SINC_FILTER_GLUE2_BREAK        0x0090 0x0394 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO32__XBAR1_XBAR_INOUT8              0x0090 0x0394 0x087c 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO33__GPIO3_IO1                      0x0094 0x0398 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO33__LPIT3_TRIGGER1                 0x0094 0x0398 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO33__LPUART7_RX                     0x0094 0x0398 0x07d0 0x02 0x01
+#define IMX94_PAD_GPIO_IO33__GPT_MUX_INOUT1                 0x0094 0x0398 0x0700 0x03 0x01
+#define IMX94_PAD_GPIO_IO33__FLEXIO1_3_1_FLEXIO7            0x0094 0x0398 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO33__FLEXPWM3_PWMB0                 0x0094 0x0398 0x06b8 0x05 0x00
+#define IMX94_PAD_GPIO_IO33__SINC_FILTER_GLUE1_BREAK        0x0094 0x0398 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO33__XBAR1_XBAR_INOUT9              0x0094 0x0398 0x0880 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO34__GPIO3_IO2                      0x0098 0x039c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO34__LPI2C7_SDA                     0x0098 0x039c 0x0754 0x01 0x02
+#define IMX94_PAD_GPIO_IO34__CAN2_TX                        0x0098 0x039c 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO34__ECAT_SDA                       0x0098 0x039c 0x062c 0x03 0x01
+#define IMX94_PAD_GPIO_IO34__FLEXIO1_3_1_FLEXIO8            0x0098 0x039c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO34__FLEXPWM3_PWMA1                 0x0098 0x039c 0x06ac 0x05 0x00
+#define IMX94_PAD_GPIO_IO34__FLEXPWM1_PWMX0                 0x0098 0x039c 0x0698 0x06 0x00
+#define IMX94_PAD_GPIO_IO34__XBAR1_XBAR_INOUT10             0x0098 0x039c 0x0884 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO35__GPIO3_IO3                      0x009c 0x03a0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO35__LPI2C7_SCL                     0x009c 0x03a0 0x0750 0x01 0x02
+#define IMX94_PAD_GPIO_IO35__CAN2_RX                        0x009c 0x03a0 0x067c 0x02 0x01
+#define IMX94_PAD_GPIO_IO35__ECAT_SCL                       0x009c 0x03a0 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO35__FLEXIO1_3_1_FLEXIO9            0x009c 0x03a0 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO35__FLEXPWM3_PWMB1                 0x009c 0x03a0 0x06bc 0x05 0x00
+#define IMX94_PAD_GPIO_IO35__FLEXPWM1_PWMX1                 0x009c 0x03a0 0x069c 0x06 0x00
+#define IMX94_PAD_GPIO_IO35__XBAR1_XBAR_INOUT11             0x009c 0x03a0 0x0888 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO36__USDHC2_WP                      0x00a0 0x03a4 0x0854 0x03 0x01
+#define IMX94_PAD_GPIO_IO36__FLEXIO1_3_1_FLEXIO10           0x00a0 0x03a4 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO36__FLEXPWM3_PWMA2                 0x00a0 0x03a4 0x06b0 0x05 0x00
+#define IMX94_PAD_GPIO_IO36__FLEXPWM2_PWMX0                 0x00a0 0x03a4 0x06a0 0x06 0x00
+#define IMX94_PAD_GPIO_IO36__XBAR1_XBAR_INOUT12             0x00a0 0x03a4 0x088c 0x07 0x00
+#define IMX94_PAD_GPIO_IO36__GPIO3_IO4                      0x00a0 0x03a4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO36__LPI2C8_SDA                     0x00a0 0x03a4 0x075c 0x01 0x03
+#define IMX94_PAD_GPIO_IO36__CAN4_TX                        0x00a0 0x03a4 0x0000 0x02 0x00
+
+#define IMX94_PAD_GPIO_IO37__GPIO3_IO5                      0x00a4 0x03a8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO37__LPI2C8_SCL                     0x00a4 0x03a8 0x0758 0x01 0x03
+#define IMX94_PAD_GPIO_IO37__CAN4_RX                        0x00a4 0x03a8 0x0684 0x02 0x00
+#define IMX94_PAD_GPIO_IO37__LPI2C5_HREQ                    0x00a4 0x03a8 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO37__FLEXIO1_3_1_FLEXIO11           0x00a4 0x03a8 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO37__FLEXPWM3_PWMB2                 0x00a4 0x03a8 0x06c0 0x05 0x00
+#define IMX94_PAD_GPIO_IO37__FLEXPWM2_PWMX1                 0x00a4 0x03a8 0x06a4 0x06 0x00
+#define IMX94_PAD_GPIO_IO37__XBAR1_XBAR_INOUT13             0x00a4 0x03a8 0x0890 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO38__GPIO3_IO6                      0x00a8 0x03ac 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO38__NETC_1588MUX_INOUT0            0x00a8 0x03ac 0x064c 0x01 0x00
+#define IMX94_PAD_GPIO_IO38__LPI2C3_SDA                     0x00a8 0x03ac 0x0730 0x02 0x01
+#define IMX94_PAD_GPIO_IO38__LPIT3_TRIGGER2                 0x00a8 0x03ac 0x0764 0x03 0x00
+#define IMX94_PAD_GPIO_IO38__FLEXIO1_3_1_FLEXIO12           0x00a8 0x03ac 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO38__LPUART3_CTS_B                  0x00a8 0x03ac 0x07a0 0x05 0x00
+#define IMX94_PAD_GPIO_IO38__FLEXPWM3_PWMX0                 0x00a8 0x03ac 0x06c8 0x06 0x01
+#define IMX94_PAD_GPIO_IO38__XBAR1_XBAR_INOUT14             0x00a8 0x03ac 0x0894 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO39__GPIO3_IO7                      0x00ac 0x03b0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO39__NETC_1588MUX_INOUT1            0x00ac 0x03b0 0x0650 0x01 0x00
+#define IMX94_PAD_GPIO_IO39__LPI2C3_SCL                     0x00ac 0x03b0 0x072c 0x02 0x01
+#define IMX94_PAD_GPIO_IO39__LPIT2_TRIGGER2                 0x00ac 0x03b0 0x0760 0x03 0x00
+#define IMX94_PAD_GPIO_IO39__FLEXIO1_3_1_FLEXIO13           0x00ac 0x03b0 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO39__LPUART3_RTS_B                  0x00ac 0x03b0 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO39__FLEXPWM3_PWMX1                 0x00ac 0x03b0 0x06cc 0x06 0x01
+#define IMX94_PAD_GPIO_IO39__XBAR1_XBAR_INOUT15             0x00ac 0x03b0 0x0898 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO40__GPIO3_IO8                      0x00b0 0x03b4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO40__NETC_1588MUX_INOUT2            0x00b0 0x03b4 0x0654 0x01 0x00
+#define IMX94_PAD_GPIO_IO40__LPI2C7_SDA                     0x00b0 0x03b4 0x0754 0x02 0x03
+#define IMX94_PAD_GPIO_IO40__LPUART4_TX                     0x00b0 0x03b4 0x07b4 0x03 0x01
+#define IMX94_PAD_GPIO_IO40__FLEXIO1_3_1_FLEXIO14           0x00b0 0x03b4 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO40__FLEXPWM3_PWMX2                 0x00b0 0x03b4 0x06d0 0x05 0x00
+#define IMX94_PAD_GPIO_IO40__FLEXPWM4_PWMX0                 0x00b0 0x03b4 0x06f4 0x06 0x01
+#define IMX94_PAD_GPIO_IO40__XBAR1_XBAR_INOUT16             0x00b0 0x03b4 0x089c 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO41__GPIO3_IO9                      0x00b4 0x03b8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO41__NETC_1588MUX_INOUT3            0x00b4 0x03b8 0x0658 0x01 0x00
+#define IMX94_PAD_GPIO_IO41__LPI2C7_SCL                     0x00b4 0x03b8 0x0750 0x02 0x03
+#define IMX94_PAD_GPIO_IO41__LPUART4_RX                     0x00b4 0x03b8 0x07b0 0x03 0x01
+#define IMX94_PAD_GPIO_IO41__FLEXIO1_3_1_FLEXIO15           0x00b4 0x03b8 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO41__LPI2C6_HREQ                    0x00b4 0x03b8 0x0744 0x05 0x01
+#define IMX94_PAD_GPIO_IO41__FLEXPWM4_PWMX1                 0x00b4 0x03b8 0x06f8 0x06 0x01
+#define IMX94_PAD_GPIO_IO41__XBAR1_XBAR_INOUT17             0x00b4 0x03b8 0x08a0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO42__GPIO3_IO10                     0x00b8 0x03bc 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO42__SAI3_TX_BCLK                   0x00b8 0x03bc 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO42__PDM_BIT_STREAM2                0x00b8 0x03bc 0x0618 0x02 0x01
+#define IMX94_PAD_GPIO_IO42__XBAR1_XBAR_INOUT11             0x00b8 0x03bc 0x0888 0x03 0x01
+#define IMX94_PAD_GPIO_IO42__LPUART3_TX                     0x00b8 0x03bc 0x07a8 0x04 0x01
+#define IMX94_PAD_GPIO_IO42__LPSPI4_PCS2                    0x00b8 0x03bc 0x076c 0x05 0x01
+#define IMX94_PAD_GPIO_IO42__LPUART4_CTS_B                  0x00b8 0x03bc 0x07ac 0x06 0x00
+#define IMX94_PAD_GPIO_IO42__SINC4_EMCLK1                   0x00b8 0x03bc 0x0830 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO43__GPIO3_IO11                     0x00bc 0x03c0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO43__SAI3_MCLK                      0x00bc 0x03c0 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO43__XBAR1_XBAR_INOUT12             0x00bc 0x03c0 0x088c 0x03 0x01
+#define IMX94_PAD_GPIO_IO43__LPUART3_RX                     0x00bc 0x03c0 0x07a4 0x04 0x01
+#define IMX94_PAD_GPIO_IO43__LPSPI3_PCS1                    0x00bc 0x03c0 0x0768 0x05 0x02
+#define IMX94_PAD_GPIO_IO43__LPUART4_RTS_B                  0x00bc 0x03c0 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO43__SINC4_EMBIT1                   0x00bc 0x03c0 0x0824 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO44__GPIO3_IO12                     0x00c0 0x03c4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO44__SAI3_RX_BCLK                   0x00c0 0x03c4 0x0800 0x01 0x00
+#define IMX94_PAD_GPIO_IO44__PDM_BIT_STREAM1                0x00c0 0x03c4 0x0614 0x02 0x01
+#define IMX94_PAD_GPIO_IO44__LPUART9_TX                     0x00c0 0x03c4 0x07e4 0x03 0x00
+#define IMX94_PAD_GPIO_IO44__LPSPI5_PCS0                    0x00c0 0x03c4 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO44__LPI2C3_SDA                     0x00c0 0x03c4 0x0730 0x05 0x02
+#define IMX94_PAD_GPIO_IO44__TPM5_CH2                       0x00c0 0x03c4 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO44__SINC_FILTER_GLUE4_BREAK        0x00c0 0x03c4 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO45__GPIO3_IO13                     0x00c4 0x03c8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO45__SAI3_RX_SYNC                   0x00c4 0x03c8 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO45__PDM_BIT_STREAM3                0x00c4 0x03c8 0x061c 0x02 0x01
+#define IMX94_PAD_GPIO_IO45__LPUART9_RX                     0x00c4 0x03c8 0x07e0 0x03 0x00
+#define IMX94_PAD_GPIO_IO45__LPSPI5_SIN                     0x00c4 0x03c8 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO45__LPI2C3_SCL                     0x00c4 0x03c8 0x072c 0x05 0x02
+#define IMX94_PAD_GPIO_IO45__TPM6_CH2                       0x00c4 0x03c8 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO45__SAI3_TX_DATA0                  0x00c4 0x03c8 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO46__GPIO3_IO14                     0x00c8 0x03cc 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO46__SAI3_RX_DATA0                  0x00c8 0x03cc 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO46__PDM_BIT_STREAM0                0x00c8 0x03cc 0x0610 0x02 0x01
+#define IMX94_PAD_GPIO_IO46__LPUART9_CTS_B                  0x00c8 0x03cc 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO46__LPSPI5_SOUT                    0x00c8 0x03cc 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO46__LPI2C4_SDA                     0x00c8 0x03cc 0x0738 0x05 0x01
+#define IMX94_PAD_GPIO_IO46__TPM3_CH1                       0x00c8 0x03cc 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO46__EWM_OUT_B                      0x00c8 0x03cc 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO47__GPIO3_IO15                     0x00cc 0x03d0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO47__SAI3_TX_DATA0                  0x00cc 0x03d0 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO47__PDM_CLK                        0x00cc 0x03d0 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO47__LPUART9_RTS_B                  0x00cc 0x03d0 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO47__LPSPI5_SCK                     0x00cc 0x03d0 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO47__LPI2C4_SCL                     0x00cc 0x03d0 0x0734 0x05 0x01
+#define IMX94_PAD_GPIO_IO47__TPM4_CH1                       0x00cc 0x03d0 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO47__SAI3_RX_BCLK                   0x00cc 0x03d0 0x0800 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO48__GPIO3_IO16                     0x00d0 0x03d4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO48__USDHC3_CLK                     0x00d0 0x03d4 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO48__CAN5_TX                        0x00d0 0x03d4 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO48__LPUART10_TX                    0x00d0 0x03d4 0x0794 0x03 0x01
+#define IMX94_PAD_GPIO_IO48__TPM5_CH1                       0x00d0 0x03d4 0x0840 0x04 0x00
+#define IMX94_PAD_GPIO_IO48__TPM6_EXTCLK                    0x00d0 0x03d4 0x0850 0x05 0x00
+#define IMX94_PAD_GPIO_IO48__LPI2C5_SDA                     0x00d0 0x03d4 0x0740 0x06 0x02
+#define IMX94_PAD_GPIO_IO48__SINC4_EMCLK2                   0x00d0 0x03d4 0x0834 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO49__GPIO3_IO17                     0x00d4 0x03d8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO49__USDHC3_CMD                     0x00d4 0x03d8 0x0858 0x01 0x00
+#define IMX94_PAD_GPIO_IO49__CAN5_RX                        0x00d4 0x03d8 0x0688 0x02 0x01
+#define IMX94_PAD_GPIO_IO49__LPUART10_RX                    0x00d4 0x03d8 0x0790 0x03 0x01
+#define IMX94_PAD_GPIO_IO49__TPM6_CH1                       0x00d4 0x03d8 0x0848 0x04 0x00
+#define IMX94_PAD_GPIO_IO49__XBAR1_XBAR_INOUT13             0x00d4 0x03d8 0x0890 0x05 0x01
+#define IMX94_PAD_GPIO_IO49__LPI2C5_SCL                     0x00d4 0x03d8 0x073c 0x06 0x02
+#define IMX94_PAD_GPIO_IO49__SINC4_EMBIT2                   0x00d4 0x03d8 0x0828 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO50__GPIO3_IO18                     0x00d8 0x03dc 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO50__USDHC3_DATA0                   0x00d8 0x03dc 0x085c 0x01 0x00
+#define IMX94_PAD_GPIO_IO50__XBAR1_XBAR_INOUT14             0x00d8 0x03dc 0x0894 0x02 0x01
+#define IMX94_PAD_GPIO_IO50__LPUART10_CTS_B                 0x00d8 0x03dc 0x078c 0x03 0x01
+#define IMX94_PAD_GPIO_IO50__TPM3_CH3                       0x00d8 0x03dc 0x0838 0x04 0x00
+#define IMX94_PAD_GPIO_IO50__JTAG_MUX_TDO                   0x00d8 0x03dc 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO50__LPSPI6_PCS1                    0x00d8 0x03dc 0x0774 0x06 0x00
+#define IMX94_PAD_GPIO_IO50__SINC4_EMCLK3                   0x00d8 0x03dc 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO51__GPIO3_IO19                     0x00dc 0x03e0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO51__USDHC3_DATA1                   0x00dc 0x03e0 0x0860 0x01 0x00
+#define IMX94_PAD_GPIO_IO51__CAN2_TX                        0x00dc 0x03e0 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO51__LPUART10_RTS_B                 0x00dc 0x03e0 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO51__TPM4_CH3                       0x00dc 0x03e0 0x083c 0x04 0x00
+#define IMX94_PAD_GPIO_IO51__JTAG_MUX_TCK                   0x00dc 0x03e0 0x0928 0x05 0x01
+#define IMX94_PAD_GPIO_IO51__LPSPI7_PCS1                    0x00dc 0x03e0 0x0778 0x06 0x00
+#define IMX94_PAD_GPIO_IO51__SINC4_EMBIT3                   0x00dc 0x03e0 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO52__GPIO3_IO20                     0x00e0 0x03e4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO52__USDHC3_DATA2                   0x00e0 0x03e4 0x0864 0x01 0x00
+#define IMX94_PAD_GPIO_IO52__PDM_BIT_STREAM1                0x00e0 0x03e4 0x0614 0x02 0x02
+#define IMX94_PAD_GPIO_IO52__LPSPI4_PCS2                    0x00e0 0x03e4 0x076c 0x03 0x02
+#define IMX94_PAD_GPIO_IO52__TPM5_CH3                       0x00e0 0x03e4 0x0844 0x04 0x00
+#define IMX94_PAD_GPIO_IO52__JTAG_MUX_TDI                   0x00e0 0x03e4 0x092c 0x05 0x01
+#define IMX94_PAD_GPIO_IO52__LPSPI8_PCS1                    0x00e0 0x03e4 0x077c 0x06 0x00
+#define IMX94_PAD_GPIO_IO52__SAI3_TX_SYNC                   0x00e0 0x03e4 0x0804 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO53__GPIO3_IO21                     0x00e4 0x03e8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO53__USDHC3_DATA3                   0x00e4 0x03e8 0x0868 0x01 0x00
+#define IMX94_PAD_GPIO_IO53__CAN2_RX                        0x00e4 0x03e8 0x067c 0x02 0x02
+#define IMX94_PAD_GPIO_IO53__LPSPI3_PCS1                    0x00e4 0x03e8 0x0768 0x03 0x03
+#define IMX94_PAD_GPIO_IO53__TPM6_CH3                       0x00e4 0x03e8 0x084c 0x04 0x00
+#define IMX94_PAD_GPIO_IO53__JTAG_MUX_TMS                   0x00e4 0x03e8 0x0930 0x05 0x01
+#define IMX94_PAD_GPIO_IO53__LPSPI5_PCS1                    0x00e4 0x03e8 0x0770 0x06 0x00
+#define IMX94_PAD_GPIO_IO53__SINC4_MOD_CLK1                 0x00e4 0x03e8 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO54__GPIO3_IO22                     0x00e8 0x03ec 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO54__NETC_1588MUX_INOUT4            0x00e8 0x03ec 0x065c 0x01 0x00
+#define IMX94_PAD_GPIO_IO54__CAN4_TX                        0x00e8 0x03ec 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO54__LPIT3_TRIGGER2                 0x00e8 0x03ec 0x0764 0x03 0x01
+#define IMX94_PAD_GPIO_IO54__LPSPI6_PCS1                    0x00e8 0x03ec 0x0774 0x04 0x01
+#define IMX94_PAD_GPIO_IO54__TPM3_CH3                       0x00e8 0x03ec 0x0838 0x05 0x01
+#define IMX94_PAD_GPIO_IO54__SINC3_EMCLK0                   0x00e8 0x03ec 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO54__XBAR1_XBAR_INOUT18             0x00e8 0x03ec 0x08a4 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO55__GPIO3_IO23                     0x00ec 0x03f0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO55__NETC_1588MUX_INOUT5            0x00ec 0x03f0 0x0660 0x01 0x00
+#define IMX94_PAD_GPIO_IO55__CAN4_RX                        0x00ec 0x03f0 0x0684 0x02 0x01
+#define IMX94_PAD_GPIO_IO55__LPIT2_TRIGGER2                 0x00ec 0x03f0 0x0760 0x03 0x01
+#define IMX94_PAD_GPIO_IO55__LPSPI7_PCS1                    0x00ec 0x03f0 0x0778 0x04 0x01
+#define IMX94_PAD_GPIO_IO55__TPM4_CH3                       0x00ec 0x03f0 0x083c 0x05 0x01
+#define IMX94_PAD_GPIO_IO55__SINC3_EMBIT0                   0x00ec 0x03f0 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO55__XBAR1_XBAR_INOUT19             0x00ec 0x03f0 0x08a8 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO56__GPIO3_IO24                     0x00f0 0x03f4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO56__NETC_1588MUX_INOUT6            0x00f0 0x03f4 0x0664 0x01 0x00
+#define IMX94_PAD_GPIO_IO56__CAN5_TX                        0x00f0 0x03f4 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO56__LPIT3_TRIGGER3                 0x00f0 0x03f4 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO56__LPSPI8_PCS1                    0x00f0 0x03f4 0x077c 0x04 0x01
+#define IMX94_PAD_GPIO_IO56__SAI3_TX_SYNC                   0x00f0 0x03f4 0x0804 0x05 0x01
+#define IMX94_PAD_GPIO_IO56__SINC3_EMCLK1                   0x00f0 0x03f4 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO56__XBAR1_XBAR_INOUT20             0x00f0 0x03f4 0x08ac 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO57__GPIO3_IO25                     0x00f4 0x03f8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO57__NETC_1588MUX_INOUT7            0x00f4 0x03f8 0x0668 0x01 0x00
+#define IMX94_PAD_GPIO_IO57__CAN5_RX                        0x00f4 0x03f8 0x0688 0x02 0x02
+#define IMX94_PAD_GPIO_IO57__LPIT2_TRIGGER3                 0x00f4 0x03f8 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO57__LPSPI5_PCS1                    0x00f4 0x03f8 0x0770 0x04 0x01
+#define IMX94_PAD_GPIO_IO57__TPM6_CH3                       0x00f4 0x03f8 0x084c 0x05 0x01
+#define IMX94_PAD_GPIO_IO57__SINC3_EMBIT1                   0x00f4 0x03f8 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO57__ENET_REF_CLK_ROOT              0x00f4 0x03f8 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO1__CLKO_1                         0x00f8 0x03fc 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO1__NETC_1588MUX_INOUT8            0x00f8 0x03fc 0x066c 0x01 0x00
+#define IMX94_PAD_CCM_CLKO1__LPUART9_TX                     0x00f8 0x03fc 0x07e4 0x02 0x01
+#define IMX94_PAD_CCM_CLKO1__ECAT_LED_RUN                   0x00f8 0x03fc 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO1__TPM6_EXTCLK                    0x00f8 0x03fc 0x0850 0x04 0x01
+#define IMX94_PAD_CCM_CLKO1__GPIO4_IO0                      0x00f8 0x03fc 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO1__SINC3_EMCLK2                   0x00f8 0x03fc 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO1__XBAR1_XBAR_INOUT22             0x00f8 0x03fc 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO2__CLKO_2                         0x00fc 0x0400 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO2__NETC_1588MUX_INOUT9            0x00fc 0x0400 0x0670 0x01 0x00
+#define IMX94_PAD_CCM_CLKO2__LPUART9_RX                     0x00fc 0x0400 0x07e0 0x02 0x01
+#define IMX94_PAD_CCM_CLKO2__ECAT_LED_ERR                   0x00fc 0x0400 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO2__TPM5_CH1                       0x00fc 0x0400 0x0840 0x04 0x01
+#define IMX94_PAD_CCM_CLKO2__GPIO4_IO1                      0x00fc 0x0400 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO2__SINC3_EMBIT2                   0x00fc 0x0400 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO2__XBAR1_XBAR_INOUT23             0x00fc 0x0400 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO3__CLKO_3                         0x0100 0x0404 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO3__NETC_1588MUX_INOUT10           0x0100 0x0404 0x0674 0x01 0x00
+#define IMX94_PAD_CCM_CLKO3__CAN3_TX                        0x0100 0x0404 0x0000 0x02 0x00
+#define IMX94_PAD_CCM_CLKO3__ECAT_LED_STATE_RUN             0x0100 0x0404 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO3__TPM6_CH1                       0x0100 0x0404 0x0848 0x04 0x01
+#define IMX94_PAD_CCM_CLKO3__GPIO4_IO2                      0x0100 0x0404 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO3__SINC3_EMCLK3                   0x0100 0x0404 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO3__ENET_REF_CLK_ROOT              0x0100 0x0404 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO4__CLKO_4                         0x0104 0x0408 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO4__NETC_1588MUX_INOUT11           0x0104 0x0408 0x0000 0x01 0x00
+#define IMX94_PAD_CCM_CLKO4__CAN3_RX                        0x0104 0x0408 0x0680 0x02 0x01
+#define IMX94_PAD_CCM_CLKO4__ECAT_RESET_OUT                 0x0104 0x0408 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO4__TPM5_CH3                       0x0104 0x0408 0x0844 0x04 0x01
+#define IMX94_PAD_CCM_CLKO4__GPIO4_IO3                      0x0104 0x0408 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO4__SINC3_EMBIT3                   0x0104 0x0408 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO4__XBAR1_XBAR_INOUT25             0x0104 0x0408 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH2_MDC_GPIO1__NETC_EMDC                 0x0108 0x040c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__NETC_ETH2_SLV_MDC         0x0108 0x040c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__I3C2_SCL                  0x0108 0x040c 0x0720 0x02 0x02
+#define IMX94_PAD_ETH2_MDC_GPIO1__USB1_OTG_ID               0x0108 0x040c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__FLEXIO2_FLEXIO0           0x0108 0x040c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__GPIO6_IO0                 0x0108 0x040c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__FLEXPWM2_PWMX0            0x0108 0x040c 0x06a0 0x06 0x01
+#define IMX94_PAD_ETH2_MDC_GPIO1__XBAR1_XBAR_INOUT30        0x0108 0x040c 0x08b0 0x07 0x01
+
+#define IMX94_PAD_ETH2_MDIO_GPIO2__NETC_EMDIO               0x010c 0x0410 0x0678 0x00 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__NETC_ETH2_SLV_MDIO       0x010c 0x0410 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__I3C2_SDA                 0x010c 0x0410 0x0724 0x02 0x02
+#define IMX94_PAD_ETH2_MDIO_GPIO2__USB1_OTG_PWR             0x010c 0x0410 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__FLEXIO2_FLEXIO1          0x010c 0x0410 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__GPIO6_IO1                0x010c 0x0410 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__FLEXPWM2_PWMX1           0x010c 0x0410 0x06a4 0x06 0x01
+#define IMX94_PAD_ETH2_MDIO_GPIO2__XBAR1_XBAR_INOUT31       0x010c 0x0410 0x08b4 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD3__NETC_PINMUX_ETH2_TXD3          0x0110 0x0414 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD3__LPUART3_DCD_B                  0x0110 0x0414 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TXD3__CAN2_TX                        0x0110 0x0414 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TXD3__USB2_OTG_ID                    0x0110 0x0414 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD3__FLEXIO2_FLEXIO2                0x0110 0x0414 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD3__GPIO6_IO2                      0x0110 0x0414 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD3__FLEXPWM2_PWMA0                 0x0110 0x0414 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD3__XBAR1_XBAR_INOUT32             0x0110 0x0414 0x08b8 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD2__NETC_PINMUX_ETH2_TXD2          0x0114 0x0418 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD2__ETH2_RMII_REF50_CLK            0x0114 0x0418 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TXD2__CAN2_RX                        0x0114 0x0418 0x067c 0x02 0x03
+#define IMX94_PAD_ETH2_TXD2__USB2_OTG_OC                    0x0114 0x0418 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD2__FLEXIO2_FLEXIO3                0x0114 0x0418 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD2__GPIO6_IO3                      0x0114 0x0418 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD2__FLEXPWM2_PWMB0                 0x0114 0x0418 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD2__XBAR1_XBAR_INOUT33             0x0114 0x0418 0x08bc 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD1__NETC_PINMUX_ETH2_TXD1          0x0118 0x041c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD1__LPUART3_RTS_B                  0x0118 0x041c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TXD1__ECAT_CLK25                     0x0118 0x041c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TXD1__USB1_OTG_OC                    0x0118 0x041c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD1__FLEXIO2_FLEXIO4                0x0118 0x041c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD1__GPIO6_IO4                      0x0118 0x041c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD1__FLEXPWM2_PWMA1                 0x0118 0x041c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD1__XBAR1_XBAR_INOUT34             0x0118 0x041c 0x08c0 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD0__NETC_PINMUX_ETH2_TXD0          0x011c 0x0420 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD0__LPUART3_TX                     0x011c 0x0420 0x07a8 0x01 0x02
+#define IMX94_PAD_ETH2_TXD0__I3C2_PUR                       0x011c 0x0420 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TXD0__I3C2_PUR_B                     0x011c 0x0420 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD0__FLEXIO2_FLEXIO5                0x011c 0x0420 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD0__GPIO6_IO5                      0x011c 0x0420 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD0__FLEXPWM2_PWMB1                 0x011c 0x0420 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD0__XBAR1_XBAR_INOUT35             0x011c 0x0420 0x08c4 0x07 0x01
+
+#define IMX94_PAD_ETH2_TX_CTL__NETC_PINMUX_ETH2_TX_CTL      0x0120 0x0424 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TX_CTL__LPUART3_DTR_B                0x0120 0x0424 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TX_CTL__ECAT_LED_RUN                 0x0120 0x0424 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TX_CTL__FLEXIO2_FLEXIO6              0x0120 0x0424 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TX_CTL__GPIO6_IO6                    0x0120 0x0424 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TX_CTL__FLEXPWM2_PWMA2               0x0120 0x0424 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TX_CTL__XBAR1_XBAR_INOUT36           0x0120 0x0424 0x08c8 0x07 0x01
+
+#define IMX94_PAD_ETH2_TX_CLK__NETC_PINMUX_ETH2_TX_CLK      0x0124 0x0428 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TX_CLK__ECAT_LED_ERR                 0x0124 0x0428 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TX_CLK__FLEXIO2_FLEXIO7              0x0124 0x0428 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TX_CLK__GPIO6_IO7                    0x0124 0x0428 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TX_CLK__FLEXPWM2_PWMB2               0x0124 0x0428 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TX_CLK__XBAR1_XBAR_INOUT37           0x0124 0x0428 0x08cc 0x07 0x01
+
+#define IMX94_PAD_ETH2_RX_CTL__NETC_PINMUX_ETH2_RX_CTL      0x0128 0x042c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RX_CTL__LPUART3_DSR_B                0x0128 0x042c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_RX_CTL__ECAT_LED_STATE_RUN           0x0128 0x042c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_RX_CTL__USB2_OTG_PWR                 0x0128 0x042c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_RX_CTL__FLEXIO2_FLEXIO8              0x0128 0x042c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RX_CTL__GPIO6_IO8                    0x0128 0x042c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RX_CTL__FLEXPWM2_PWMA3               0x0128 0x042c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RX_CTL__SINC4_EMCLK0                 0x0128 0x042c 0x082c 0x07 0x01
+
+#define IMX94_PAD_ETH2_RX_CLK__NETC_PINMUX_ETH2_RX_CLK      0x012c 0x0430 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RX_CLK__LPUART3_RIN_B                0x012c 0x0430 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_RX_CLK__ECAT_RESET_OUT               0x012c 0x0430 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_RX_CLK__XBAR1_XBAR_INOUT38           0x012c 0x0430 0x08d0 0x03 0x01
+#define IMX94_PAD_ETH2_RX_CLK__FLEXIO2_FLEXIO9              0x012c 0x0430 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RX_CLK__GPIO6_IO9                    0x012c 0x0430 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RX_CLK__FLEXPWM2_PWMB3               0x012c 0x0430 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RX_CLK__SINC4_EMBIT0                 0x012c 0x0430 0x0820 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD0__NETC_PINMUX_ETH2_RXD0          0x0130 0x0434 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD0__LPUART3_RX                     0x0130 0x0434 0x07a4 0x01 0x02
+#define IMX94_PAD_ETH2_RXD0__FLEXIO2_FLEXIO10               0x0130 0x0434 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD0__GPIO6_IO10                     0x0130 0x0434 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD0__DIG_ENCODER2_DATA_EN           0x0130 0x0434 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RXD0__XBAR1_XBAR_INOUT39             0x0130 0x0434 0x08d4 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD1__NETC_PINMUX_ETH2_RXD1          0x0134 0x0438 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD1__LPUART3_CTS_B                  0x0134 0x0438 0x07a0 0x01 0x01
+#define IMX94_PAD_ETH2_RXD1__LPTMR2_ALT0                    0x0134 0x0438 0x0780 0x03 0x00
+#define IMX94_PAD_ETH2_RXD1__FLEXIO2_FLEXIO11               0x0134 0x0438 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD1__GPIO6_IO11                     0x0134 0x0438 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD1__DIG_ENCODER2_DATA_CLK          0x0134 0x0438 0x068c 0x06 0x00
+#define IMX94_PAD_ETH2_RXD1__XBAR1_XBAR_INOUT40             0x0134 0x0438 0x08d8 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD2__NETC_PINMUX_ETH2_RXD2          0x0138 0x043c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD2__LPTMR2_ALT1                    0x0138 0x043c 0x0784 0x03 0x00
+#define IMX94_PAD_ETH2_RXD2__FLEXIO2_FLEXIO12               0x0138 0x043c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD2__GPIO6_IO12                     0x0138 0x043c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD2__DIG_ENCODER2_DATA_OUT          0x0138 0x043c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RXD2__XBAR1_XBAR_INOUT41             0x0138 0x043c 0x08dc 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD3__NETC_PINMUX_ETH2_RXD3          0x013c 0x0440 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD3__LPTMR2_ALT2                    0x013c 0x0440 0x0788 0x03 0x00
+#define IMX94_PAD_ETH2_RXD3__FLEXIO2_FLEXIO13               0x013c 0x0440 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD3__GPIO6_IO13                     0x013c 0x0440 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD3__DIG_ENCODER2_DATA_IN           0x013c 0x0440 0x0690 0x06 0x00
+#define IMX94_PAD_ETH2_RXD3__XBAR1_XBAR_INOUT42             0x013c 0x0440 0x08e0 0x07 0x01
+
+#define IMX94_PAD_ETH3_MDC_GPIO1__NETC_EMDC                 0x0140 0x0444 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__LPUART4_DCD_B             0x0140 0x0444 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__NETC_ETH3_SLV_MDC         0x0140 0x0444 0x0000 0x02 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__SAI4_TX_SYNC              0x0140 0x0444 0x081c 0x03 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__FLEXIO2_FLEXIO14          0x0140 0x0444 0x0000 0x04 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__GPIO6_IO14                0x0140 0x0444 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__FLEXPWM1_PWMX0            0x0140 0x0444 0x0698 0x06 0x01
+#define IMX94_PAD_ETH3_MDC_GPIO1__SINC4_MOD_CLK0            0x0140 0x0444 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH3_MDIO_GPIO2__NETC_EMDIO               0x0144 0x0448 0x0678 0x00 0x01
+#define IMX94_PAD_ETH3_MDIO_GPIO2__LPUART4_RIN_B            0x0144 0x0448 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__NETC_ETH3_SLV_MDIO       0x0144 0x0448 0x0000 0x02 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__SAI4_TX_BCLK             0x0144 0x0448 0x0818 0x03 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__FLEXIO2_FLEXIO15         0x0144 0x0448 0x0000 0x04 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__GPIO6_IO15               0x0144 0x0448 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__FLEXPWM1_PWMX1           0x0144 0x0448 0x069c 0x06 0x01
+#define IMX94_PAD_ETH3_MDIO_GPIO2__SINC4_MOD_CLK1           0x0144 0x0448 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH3_TXD3__NETC_PINMUX_ETH3_TXD3          0x0148 0x044c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD3__XSPI_SLV_DATA7                 0x0148 0x044c 0x0924 0x02 0x00
+#define IMX94_PAD_ETH3_TXD3__SAI4_TX_DATA0                  0x0148 0x044c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH3_TXD3__LPUART3_TX                     0x0148 0x044c 0x07a8 0x04 0x03
+#define IMX94_PAD_ETH3_TXD3__GPIO6_IO16                     0x0148 0x044c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD3__FLEXPWM1_PWMA0                 0x0148 0x044c 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TXD2__NETC_PINMUX_ETH3_TXD2          0x014c 0x0450 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD2__ETH3_RMII_REF50_CLK            0x014c 0x0450 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_TXD2__XSPI_SLV_DATA6                 0x014c 0x0450 0x0920 0x02 0x00
+#define IMX94_PAD_ETH3_TXD2__SAI4_RX_SYNC                   0x014c 0x0450 0x0814 0x03 0x00
+#define IMX94_PAD_ETH3_TXD2__GPIO6_IO17                     0x014c 0x0450 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD2__FLEXPWM1_PWMB0                 0x014c 0x0450 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TXD1__NETC_PINMUX_ETH3_TXD1          0x0150 0x0454 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD1__LPUART4_RTS_B                  0x0150 0x0454 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_TXD1__XSPI_SLV_DATA5                 0x0150 0x0454 0x091c 0x02 0x00
+#define IMX94_PAD_ETH3_TXD1__SAI4_RX_BCLK                   0x0150 0x0454 0x080c 0x03 0x00
+#define IMX94_PAD_ETH3_TXD1__GPIO6_IO18                     0x0150 0x0454 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD1__FLEXPWM1_PWMA1                 0x0150 0x0454 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TXD0__NETC_PINMUX_ETH3_TXD0          0x0154 0x0458 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD0__LPUART4_TX                     0x0154 0x0458 0x07b4 0x01 0x02
+#define IMX94_PAD_ETH3_TXD0__XSPI_SLV_DATA4                 0x0154 0x0458 0x0918 0x02 0x00
+#define IMX94_PAD_ETH3_TXD0__SAI4_RX_DATA0                  0x0154 0x0458 0x0810 0x03 0x00
+#define IMX94_PAD_ETH3_TXD0__GPIO6_IO19                     0x0154 0x0458 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD0__FLEXPWM1_PWMB1                 0x0154 0x0458 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TX_CTL__NETC_PINMUX_ETH3_TX_CTL      0x0158 0x045c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TX_CTL__LPUART4_DTR_B                0x0158 0x045c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_TX_CTL__XSPI_SLV_DQS                 0x0158 0x045c 0x0900 0x02 0x00
+#define IMX94_PAD_ETH3_TX_CTL__SAI4_MCLK                    0x0158 0x045c 0x0808 0x03 0x00
+#define IMX94_PAD_ETH3_TX_CTL__LPUART3_RX                   0x0158 0x045c 0x07a4 0x04 0x03
+#define IMX94_PAD_ETH3_TX_CTL__GPIO6_IO20                   0x0158 0x045c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TX_CTL__FLEXPWM1_PWMA2               0x0158 0x045c 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TX_CLK__NETC_PINMUX_ETH3_TX_CLK      0x015c 0x0460 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TX_CLK__XSPI_SLV_CLK                 0x015c 0x0460 0x0904 0x02 0x00
+#define IMX94_PAD_ETH3_TX_CLK__SAI2_TX_SYNC                 0x015c 0x0460 0x07fc 0x03 0x01
+#define IMX94_PAD_ETH3_TX_CLK__LPUART3_CTS_B                0x015c 0x0460 0x07a0 0x04 0x02
+#define IMX94_PAD_ETH3_TX_CLK__GPIO6_IO21                   0x015c 0x0460 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TX_CLK__FLEXPWM1_PWMB2               0x015c 0x0460 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_RX_CTL__NETC_PINMUX_ETH3_RX_CTL      0x0160 0x0464 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RX_CTL__LPUART4_DSR_B                0x0160 0x0464 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_RX_CTL__XSPI_SLV_CS                  0x0160 0x0464 0x08fc 0x02 0x00
+#define IMX94_PAD_ETH3_RX_CTL__SAI2_TX_BCLK                 0x0160 0x0464 0x07f8 0x03 0x01
+#define IMX94_PAD_ETH3_RX_CTL__XBAR1_XBAR_INOUT43           0x0160 0x0464 0x08e4 0x04 0x01
+#define IMX94_PAD_ETH3_RX_CTL__GPIO6_IO22                   0x0160 0x0464 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RX_CTL__FLEXPWM1_PWMA3               0x0160 0x0464 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RX_CTL__SINC4_EMCLK1                 0x0160 0x0464 0x0830 0x07 0x01
+
+#define IMX94_PAD_ETH3_RX_CLK__NETC_PINMUX_ETH3_RX_CLK      0x0164 0x0468 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RX_CLK__LPUART4_CTS_B                0x0164 0x0468 0x07ac 0x01 0x01
+#define IMX94_PAD_ETH3_RX_CLK__XSPI_SLV_DATA3               0x0164 0x0468 0x0914 0x02 0x00
+#define IMX94_PAD_ETH3_RX_CLK__SAI2_TX_DATA0                0x0164 0x0468 0x0000 0x03 0x00
+#define IMX94_PAD_ETH3_RX_CLK__XBAR1_XBAR_INOUT44           0x0164 0x0468 0x08e8 0x04 0x01
+#define IMX94_PAD_ETH3_RX_CLK__GPIO6_IO23                   0x0164 0x0468 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RX_CLK__FLEXPWM1_PWMB3               0x0164 0x0468 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RX_CLK__SINC4_EMBIT1                 0x0164 0x0468 0x0824 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD0__NETC_PINMUX_ETH3_RXD0          0x0168 0x046c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD0__LPUART4_RX                     0x0168 0x046c 0x07b0 0x01 0x02
+#define IMX94_PAD_ETH3_RXD0__XSPI_SLV_DATA2                 0x0168 0x046c 0x0910 0x02 0x00
+#define IMX94_PAD_ETH3_RXD0__SAI2_RX_SYNC                   0x0168 0x046c 0x07f4 0x03 0x01
+#define IMX94_PAD_ETH3_RXD0__GPIO6_IO24                     0x0168 0x046c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD0__DIG_ENCODER1_DATA_EN           0x0168 0x046c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD0__XBAR1_XBAR_INOUT45             0x0168 0x046c 0x08ec 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD1__NETC_PINMUX_ETH3_RXD1          0x016c 0x0470 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD1__XSPI_SLV_DATA1                 0x016c 0x0470 0x090c 0x02 0x00
+#define IMX94_PAD_ETH3_RXD1__SAI2_RX_BCLK                   0x016c 0x0470 0x07ec 0x03 0x01
+#define IMX94_PAD_ETH3_RXD1__LPUART3_RTS_B                  0x016c 0x0470 0x0000 0x04 0x00
+#define IMX94_PAD_ETH3_RXD1__GPIO6_IO25                     0x016c 0x0470 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD1__DIG_ENCODER1_DATA_CLK          0x016c 0x0470 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD1__XBAR1_XBAR_INOUT46             0x016c 0x0470 0x08f0 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD2__NETC_PINMUX_ETH3_RXD2          0x0170 0x0474 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD2__MQS2_RIGHT                     0x0170 0x0474 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_RXD2__XSPI_SLV_DATA0                 0x0170 0x0474 0x0908 0x02 0x00
+#define IMX94_PAD_ETH3_RXD2__SAI2_RX_DATA0                  0x0170 0x0474 0x07f0 0x03 0x01
+#define IMX94_PAD_ETH3_RXD2__GPIO6_IO26                     0x0170 0x0474 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD2__DIG_ENCODER1_DATA_OUT          0x0170 0x0474 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD2__XBAR1_XBAR_INOUT47             0x0170 0x0474 0x08f4 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD3__NETC_PINMUX_ETH3_RXD3          0x0174 0x0478 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD3__MQS2_LEFT                      0x0174 0x0478 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_RXD3__SAI2_MCLK                      0x0174 0x0478 0x07e8 0x03 0x01
+#define IMX94_PAD_ETH3_RXD3__GPIO6_IO27                     0x0174 0x0478 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD3__DIG_ENCODER1_DATA_IN           0x0174 0x0478 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD3__XBAR1_XBAR_INOUT48             0x0174 0x0478 0x08f8 0x07 0x01
+
+#define IMX94_PAD_ETH4_MDC_GPIO1__NETC_EMDC                 0x0178 0x047c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__ECAT_MDC                  0x0178 0x047c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__ECAT_CLK25                0x0178 0x047c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__NETC_ETH4_SLV_MDC         0x0178 0x047c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__FLEXIO1_3_2_FLEXIO12      0x0178 0x047c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__GPIO6_IO28                0x0178 0x047c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__FLEXPWM4_PWMX0            0x0178 0x047c 0x06f4 0x06 0x02
+#define IMX94_PAD_ETH4_MDC_GPIO1__SINC4_MOD_CLK2            0x0178 0x047c 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH4_MDIO_GPIO2__NETC_EMDIO               0x017c 0x0480 0x0678 0x00 0x02
+#define IMX94_PAD_ETH4_MDIO_GPIO2__ECAT_MDIO                0x017c 0x0480 0x0628 0x01 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__ENET_REF_CLK_ROOT        0x017c 0x0480 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__NETC_ETH4_SLV_MDIO       0x017c 0x0480 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__FLEXIO1_3_2_FLEXIO13     0x017c 0x0480 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__GPIO6_IO29               0x017c 0x0480 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__FLEXPWM4_PWMX1           0x017c 0x0480 0x06f8 0x06 0x02
+#define IMX94_PAD_ETH4_MDIO_GPIO2__SINC_FILTER_GLUE4_BREAK  0x017c 0x0480 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH4_TX_CLK__NETC_PINMUX_ETH4_TX_CLK      0x0180 0x0484 0x0648 0x00 0x00
+#define IMX94_PAD_ETH4_TX_CLK__USDHC3_CLK                   0x0180 0x0484 0x0000 0x01 0x00
+#define IMX94_PAD_ETH4_TX_CLK__XSPI2_A_SCLK                 0x0180 0x0484 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TX_CLK__ECAT_LED_ERR                 0x0180 0x0484 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TX_CLK__FLEXIO1_3_2_FLEXIO0          0x0180 0x0484 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TX_CLK__GPIO6_IO30                   0x0180 0x0484 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TX_CLK__FLEXPWM4_PWMA0               0x0180 0x0484 0x06d4 0x06 0x01
+#define IMX94_PAD_ETH4_TX_CLK__XBAR1_XBAR_INOUT30           0x0180 0x0484 0x08b0 0x07 0x02
+
+#define IMX94_PAD_ETH4_TX_CTL__NETC_PINMUX_ETH4_TX_CTL      0x0184 0x0488 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TX_CTL__USDHC3_CMD                   0x0184 0x0488 0x0858 0x01 0x01
+#define IMX94_PAD_ETH4_TX_CTL__XSPI2_A_SS0_B                0x0184 0x0488 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TX_CTL__ECAT_RESET_OUT               0x0184 0x0488 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TX_CTL__FLEXIO1_3_2_FLEXIO1          0x0184 0x0488 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TX_CTL__GPIO6_IO31                   0x0184 0x0488 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TX_CTL__FLEXPWM4_PWMB0               0x0184 0x0488 0x06e4 0x06 0x01
+#define IMX94_PAD_ETH4_TX_CTL__XBAR1_XBAR_INOUT31           0x0184 0x0488 0x08b4 0x07 0x02
+
+#define IMX94_PAD_ETH4_TXD0__NETC_PINMUX_ETH4_TXD0          0x0188 0x048c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD0__USDHC3_DATA0                   0x0188 0x048c 0x085c 0x01 0x01
+#define IMX94_PAD_ETH4_TXD0__XSPI2_A_DATA0                  0x0188 0x048c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD0__ECAT_LED_RUN                   0x0188 0x048c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TXD0__FLEXIO1_3_2_FLEXIO2            0x0188 0x048c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD0__GPIO7_IO0                      0x0188 0x048c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD0__FLEXPWM4_PWMA1                 0x0188 0x048c 0x06d8 0x06 0x01
+#define IMX94_PAD_ETH4_TXD0__XBAR1_XBAR_INOUT32             0x0188 0x048c 0x08b8 0x07 0x02
+
+#define IMX94_PAD_ETH4_TXD1__NETC_PINMUX_ETH4_TXD1          0x018c 0x0490 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD1__USDHC3_DATA1                   0x018c 0x0490 0x0860 0x01 0x01
+#define IMX94_PAD_ETH4_TXD1__XSPI2_A_DATA1                  0x018c 0x0490 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD1__ECAT_LED_STATE_RUN             0x018c 0x0490 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TXD1__FLEXIO1_3_2_FLEXIO3            0x018c 0x0490 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD1__GPIO7_IO1                      0x018c 0x0490 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD1__FLEXPWM4_PWMB1                 0x018c 0x0490 0x06e8 0x06 0x01
+#define IMX94_PAD_ETH4_TXD1__XBAR1_XBAR_INOUT33             0x018c 0x0490 0x08bc 0x07 0x02
+
+#define IMX94_PAD_ETH4_TXD2__NETC_PINMUX_ETH4_TXD2          0x0190 0x0494 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD2__USDHC3_DATA2                   0x0190 0x0494 0x0864 0x01 0x01
+#define IMX94_PAD_ETH4_TXD2__XSPI2_A_DATA2                  0x0190 0x0494 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD2__ECAT_CLK25                     0x0190 0x0494 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TXD2__FLEXIO1_3_2_FLEXIO4            0x0190 0x0494 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD2__GPIO7_IO2                      0x0190 0x0494 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD2__FLEXPWM4_PWMA2                 0x0190 0x0494 0x06dc 0x06 0x01
+#define IMX94_PAD_ETH4_TXD2__ETH4_RMII_REF50_CLK            0x0190 0x0494 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH4_TXD3__NETC_PINMUX_ETH4_TXD3          0x0194 0x0498 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD3__USDHC3_DATA3                   0x0194 0x0498 0x0868 0x01 0x01
+#define IMX94_PAD_ETH4_TXD3__XSPI2_A_DATA3                  0x0194 0x0498 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD3__FLEXIO1_3_2_FLEXIO5            0x0194 0x0498 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD3__GPIO7_IO3                      0x0194 0x0498 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD3__FLEXPWM4_PWMB2                 0x0194 0x0498 0x06ec 0x06 0x01
+#define IMX94_PAD_ETH4_TXD3__XBAR1_XBAR_INOUT35             0x0194 0x0498 0x08c4 0x07 0x02
+
+#define IMX94_PAD_ETH4_RXD0__NETC_PINMUX_ETH4_RXD0          0x0198 0x049c 0x0638 0x00 0x00
+#define IMX94_PAD_ETH4_RXD0__XSPI2_A_DATA4                  0x0198 0x049c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD0__FLEXIO1_3_2_FLEXIO6            0x0198 0x049c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD0__GPIO7_IO4                      0x0198 0x049c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD0__FLEXPWM4_PWMA3                 0x0198 0x049c 0x06e0 0x06 0x01
+#define IMX94_PAD_ETH4_RXD0__SINC4_EMCLK2                   0x0198 0x049c 0x0834 0x07 0x01
+
+#define IMX94_PAD_ETH4_RXD1__NETC_PINMUX_ETH4_RXD1          0x019c 0x04a0 0x063c 0x00 0x00
+#define IMX94_PAD_ETH4_RXD1__XSPI2_A_DATA5                  0x019c 0x04a0 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD1__FLEXIO2_4_1_FLEXIO11           0x019c 0x04a0 0x0694 0x03 0x00
+#define IMX94_PAD_ETH4_RXD1__FLEXIO1_3_2_FLEXIO7            0x019c 0x04a0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD1__GPIO7_IO5                      0x019c 0x04a0 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD1__FLEXPWM4_PWMB3                 0x019c 0x04a0 0x06f0 0x06 0x01
+#define IMX94_PAD_ETH4_RXD1__SINC4_EMBIT2                   0x019c 0x04a0 0x0828 0x07 0x01
+
+#define IMX94_PAD_ETH4_RXD2__NETC_PINMUX_ETH4_RXD2          0x01a0 0x04a4 0x0640 0x00 0x00
+#define IMX94_PAD_ETH4_RXD2__XSPI2_A_DATA6                  0x01a0 0x04a4 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD2__FLEXIO2_4_1_FLEXIO12           0x01a0 0x04a4 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RXD2__FLEXIO1_3_2_FLEXIO8            0x01a0 0x04a4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD2__GPIO7_IO6                      0x01a0 0x04a4 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD2__DIG_ENCODER2_DATA_EN           0x01a0 0x04a4 0x0000 0x06 0x00
+#define IMX94_PAD_ETH4_RXD2__XBAR1_XBAR_INOUT4              0x01a0 0x04a4 0x086c 0x07 0x01
+
+#define IMX94_PAD_ETH4_RXD3__NETC_PINMUX_ETH4_RXD3          0x01a4 0x04a8 0x0644 0x00 0x00
+#define IMX94_PAD_ETH4_RXD3__ENET_REF_CLK_ROOT              0x01a4 0x04a8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH4_RXD3__XSPI2_A_DATA7                  0x01a4 0x04a8 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD3__FLEXIO2_4_1_FLEXIO13           0x01a4 0x04a8 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RXD3__FLEXIO1_3_2_FLEXIO9            0x01a4 0x04a8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD3__GPIO7_IO7                      0x01a4 0x04a8 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD3__DIG_ENCODER2_DATA_CLK          0x01a4 0x04a8 0x068c 0x06 0x01
+#define IMX94_PAD_ETH4_RXD3__XBAR1_XBAR_INOUT5              0x01a4 0x04a8 0x0870 0x07 0x01
+
+#define IMX94_PAD_ETH4_RX_CTL__NETC_PINMUX_ETH4_RX_CTL      0x01a8 0x04ac 0x0634 0x00 0x00
+#define IMX94_PAD_ETH4_RX_CTL__XSPI2_A_SS1_B                0x01a8 0x04ac 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RX_CTL__FLEXIO2_4_1_FLEXIO14         0x01a8 0x04ac 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RX_CTL__FLEXIO1_3_2_FLEXIO10         0x01a8 0x04ac 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RX_CTL__GPIO7_IO8                    0x01a8 0x04ac 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RX_CTL__DIG_ENCODER2_DATA_OUT        0x01a8 0x04ac 0x0000 0x06 0x00
+#define IMX94_PAD_ETH4_RX_CTL__XBAR1_XBAR_INOUT6            0x01a8 0x04ac 0x0874 0x07 0x01
+
+#define IMX94_PAD_ETH4_RX_CLK__NETC_PINMUX_ETH4_RX_CLK      0x01ac 0x04b0 0x0630 0x00 0x00
+#define IMX94_PAD_ETH4_RX_CLK__XSPI2_A_DQS                  0x01ac 0x04b0 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RX_CLK__FLEXIO2_4_1_FLEXIO15         0x01ac 0x04b0 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RX_CLK__FLEXIO1_3_2_FLEXIO11         0x01ac 0x04b0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RX_CLK__GPIO7_IO9                    0x01ac 0x04b0 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RX_CLK__DIG_ENCODER2_DATA_IN         0x01ac 0x04b0 0x0690 0x06 0x01
+#define IMX94_PAD_ETH4_RX_CLK__XBAR1_XBAR_INOUT7            0x01ac 0x04b0 0x0878 0x07 0x01
+
+#define IMX94_PAD_ETH0_TXD0__NETC_PINMUX_ETH0_TXD0          0x01b0 0x04b4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD0__ECAT_PT0_TXD0                  0x01b0 0x04b4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD0__FLEXIO4_FLEXIO0                0x01b0 0x04b4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD0__GPIO5_IO0                      0x01b0 0x04b4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TXD1__NETC_PINMUX_ETH0_TXD1          0x01b4 0x04b8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD1__ECAT_PT0_TXD1                  0x01b4 0x04b8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD1__FLEXIO4_FLEXIO1                0x01b4 0x04b8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD1__GPIO5_IO1                      0x01b4 0x04b8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TX_EN__NETC_PINMUX_ETH0_TX_EN        0x01b8 0x04bc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TX_EN__ECAT_PT0_TX_EN                0x01b8 0x04bc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TX_EN__FLEXIO4_FLEXIO2               0x01b8 0x04bc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TX_EN__GPIO5_IO2                     0x01b8 0x04bc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TX_CLK__NETC_PINMUX_ETH0_TX_CLK      0x01bc 0x04c0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TX_CLK__ECAT_PT0_TX_CLK              0x01bc 0x04c0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TX_CLK__FLEXIO4_FLEXIO3              0x01bc 0x04c0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TX_CLK__GPIO5_IO3                    0x01bc 0x04c0 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD0__NETC_PINMUX_ETH0_RXD0          0x01c0 0x04c4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD0__ECAT_PT0_RXD0                  0x01c0 0x04c4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD0__FLEXIO4_FLEXIO4                0x01c0 0x04c4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD0__GPIO5_IO4                      0x01c0 0x04c4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD1__NETC_PINMUX_ETH0_RXD1          0x01c4 0x04c8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD1__ECAT_PT0_RXD1                  0x01c4 0x04c8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD1__FLEXIO4_FLEXIO5                0x01c4 0x04c8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD1__GPIO5_IO5                      0x01c4 0x04c8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RX_DV__NETC_PINMUX_ETH0_RX_DV        0x01c8 0x04cc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RX_DV__ECAT_PT0_RX_DV                0x01c8 0x04cc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RX_DV__FLEXIO4_FLEXIO6               0x01c8 0x04cc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RX_DV__GPIO5_IO6                     0x01c8 0x04cc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TXD2__NETC_PINMUX_ETH0_TXD2          0x01cc 0x04d0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD2__ECAT_PT0_TXD2                  0x01cc 0x04d0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD2__ETH0_RMII_REF50_CLK            0x01cc 0x04d0 0x0000 0x02 0x00
+#define IMX94_PAD_ETH0_TXD2__FLEXIO4_FLEXIO7                0x01cc 0x04d0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD2__GPIO5_IO7                      0x01cc 0x04d0 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TXD3__NETC_PINMUX_ETH0_TXD3          0x01d0 0x04d4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD3__ECAT_PT0_TXD3                  0x01d0 0x04d4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD3__FLEXIO4_FLEXIO8                0x01d0 0x04d4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD3__GPIO5_IO8                      0x01d0 0x04d4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD2__NETC_PINMUX_ETH0_RXD2          0x01d4 0x04d8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD2__ECAT_PT0_RXD2                  0x01d4 0x04d8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD2__FLEXIO4_FLEXIO9                0x01d4 0x04d8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD2__GPIO5_IO9                      0x01d4 0x04d8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD3__NETC_PINMUX_ETH0_RXD3          0x01d8 0x04dc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD3__ECAT_PT0_RXD3                  0x01d8 0x04dc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD3__FLEXIO4_FLEXIO10               0x01d8 0x04dc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD3__GPIO5_IO10                     0x01d8 0x04dc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RX_CLK__NETC_PINMUX_ETH0_RX_CLK      0x01dc 0x04e0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RX_CLK__ECAT_PT0_RX_CLK              0x01dc 0x04e0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RX_CLK__FLEXIO4_FLEXIO11             0x01dc 0x04e0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RX_CLK__GPIO5_IO11                   0x01dc 0x04e0 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RX_ER__NETC_PINMUX_ETH0_RX_ER        0x01e0 0x04e4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RX_ER__ECAT_PT0_RX_ER                0x01e0 0x04e4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RX_ER__FLEXIO4_FLEXIO12              0x01e0 0x04e4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RX_ER__GPIO5_IO12                    0x01e0 0x04e4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TX_ER__NETC_PINMUX_ETH0_TX_ER        0x01e4 0x04e8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TX_ER__ECAT_LINK_ACT0                0x01e4 0x04e8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TX_ER__FLEXIO4_FLEXIO13              0x01e4 0x04e8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TX_ER__GPIO5_IO13                    0x01e4 0x04e8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_CRS__NETC_PINMUX_ETH0_CRS            0x01e8 0x04ec 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_CRS__ECAT_LINK0                      0x01e8 0x04ec 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_CRS__NETC_EMDC                       0x01e8 0x04ec 0x0000 0x02 0x00
+#define IMX94_PAD_ETH0_CRS__FLEXIO4_FLEXIO14                0x01e8 0x04ec 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_CRS__GPIO5_IO14                      0x01e8 0x04ec 0x0000 0x05 0x00
+#define IMX94_PAD_ETH0_CRS__XBAR1_XBAR_INOUT8               0x01e8 0x04ec 0x087c 0x06 0x02
+#define IMX94_PAD_ETH0_CRS__SINC_FILTER_GLUE2_BREAK         0x01e8 0x04ec 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH0_COL__NETC_PINMUX_ETH0_COL            0x01ec 0x04f0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_COL__ECAT_LINK1                      0x01ec 0x04f0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_COL__NETC_EMDIO                      0x01ec 0x04f0 0x0678 0x02 0x03
+#define IMX94_PAD_ETH0_COL__FLEXIO4_FLEXIO15                0x01ec 0x04f0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_COL__GPIO5_IO15                      0x01ec 0x04f0 0x0000 0x05 0x00
+#define IMX94_PAD_ETH0_COL__XBAR1_XBAR_INOUT9               0x01ec 0x04f0 0x0880 0x06 0x02
+#define IMX94_PAD_ETH0_COL__SINC_FILTER_GLUE1_BREAK         0x01ec 0x04f0 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH1_TXD0__NETC_PINMUX_ETH1_TXD0          0x01f0 0x04f4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD0__ECAT_PT1_TXD0                  0x01f0 0x04f4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD0__ENCODER_DIAG0                  0x01f0 0x04f4 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD0__FLEXIO3_FLEXIO0                0x01f0 0x04f4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD0__GPIO5_IO16                     0x01f0 0x04f4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TXD1__NETC_PINMUX_ETH1_TXD1          0x01f4 0x04f8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD1__ECAT_PT1_TXD1                  0x01f4 0x04f8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD1__ENCODER_DIAG1                  0x01f4 0x04f8 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD1__FLEXIO3_FLEXIO1                0x01f4 0x04f8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD1__GPIO5_IO17                     0x01f4 0x04f8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TX_EN__NETC_PINMUX_ETH1_TX_EN        0x01f8 0x04fc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TX_EN__ECAT_PT1_TX_EN                0x01f8 0x04fc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TX_EN__ENCODER_DIAG2                 0x01f8 0x04fc 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TX_EN__FLEXIO3_FLEXIO2               0x01f8 0x04fc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TX_EN__GPIO5_IO18                    0x01f8 0x04fc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TX_CLK__NETC_PINMUX_ETH1_TX_CLK      0x01fc 0x0500 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TX_CLK__ECAT_PT1_TX_CLK              0x01fc 0x0500 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TX_CLK__ENCODER_DIAG3                0x01fc 0x0500 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TX_CLK__FLEXIO3_FLEXIO3              0x01fc 0x0500 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TX_CLK__GPIO5_IO19                   0x01fc 0x0500 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD0__NETC_PINMUX_ETH1_RXD0          0x0200 0x0504 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD0__ECAT_PT1_RXD0                  0x0200 0x0504 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD0__ENCODER_DIAG4                  0x0200 0x0504 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD0__FLEXIO3_FLEXIO4                0x0200 0x0504 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD0__GPIO5_IO20                     0x0200 0x0504 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD1__NETC_PINMUX_ETH1_RXD1          0x0204 0x0508 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD1__ECAT_PT1_RXD1                  0x0204 0x0508 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD1__ENCODER_DIAG5                  0x0204 0x0508 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD1__FLEXIO3_FLEXIO5                0x0204 0x0508 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD1__GPIO5_IO21                     0x0204 0x0508 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RX_DV__NETC_PINMUX_ETH1_RX_DV        0x0208 0x050c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RX_DV__ECAT_PT1_RX_DV                0x0208 0x050c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RX_DV__ENCODER_DIAG6                 0x0208 0x050c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RX_DV__FLEXIO3_FLEXIO6               0x0208 0x050c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RX_DV__GPIO5_IO22                    0x0208 0x050c 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TXD2__NETC_PINMUX_ETH1_TXD2          0x020c 0x0510 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD2__ECAT_PT1_TXD2                  0x020c 0x0510 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD2__ETH1_RMII_REF50_CLK            0x020c 0x0510 0x0000 0x02 0x00
+#define IMX94_PAD_ETH1_TXD2__ENCODER_DIAG7                  0x020c 0x0510 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD2__FLEXIO3_FLEXIO7                0x020c 0x0510 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD2__GPIO5_IO23                     0x020c 0x0510 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TXD3__NETC_PINMUX_ETH1_TXD3          0x0210 0x0514 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD3__ECAT_PT1_TXD3                  0x0210 0x0514 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD3__ENCODER_DIAG8                  0x0210 0x0514 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD3__FLEXIO3_FLEXIO8                0x0210 0x0514 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD3__GPIO5_IO24                     0x0210 0x0514 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD2__NETC_PINMUX_ETH1_RXD2          0x0214 0x0518 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD2__ECAT_PT1_RXD2                  0x0214 0x0518 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD2__ENCODER_DIAG9                  0x0214 0x0518 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD2__FLEXIO3_FLEXIO9                0x0214 0x0518 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD2__GPIO5_IO25                     0x0214 0x0518 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD3__NETC_PINMUX_ETH1_RXD3          0x0218 0x051c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD3__ECAT_PT1_RXD3                  0x0218 0x051c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD3__ENCODER_DIAG10                 0x0218 0x051c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD3__FLEXIO3_FLEXIO10               0x0218 0x051c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD3__GPIO5_IO26                     0x0218 0x051c 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RX_CLK__NETC_PINMUX_ETH1_RX_CLK      0x021c 0x0520 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RX_CLK__ECAT_PT1_RX_CLK              0x021c 0x0520 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RX_CLK__ENCODER_DIAG11               0x021c 0x0520 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RX_CLK__FLEXIO3_FLEXIO11             0x021c 0x0520 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RX_CLK__GPIO5_IO27                   0x021c 0x0520 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RX_ER__NETC_PINMUX_ETH1_RX_ER        0x0220 0x0524 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RX_ER__ECAT_PT1_RX_ER                0x0220 0x0524 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RX_ER__ENCODER_DIAG12                0x0220 0x0524 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RX_ER__FLEXIO3_FLEXIO12              0x0220 0x0524 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RX_ER__GPIO5_IO28                    0x0220 0x0524 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TX_ER__NETC_PINMUX_ETH1_TX_ER        0x0224 0x0528 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TX_ER__ECAT_LINK_ACT1                0x0224 0x0528 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TX_ER__ENCODER_DIAG13                0x0224 0x0528 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TX_ER__FLEXIO3_FLEXIO13              0x0224 0x0528 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TX_ER__GPIO5_IO29                    0x0224 0x0528 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_CRS__NETC_PINMUX_ETH1_CRS            0x0228 0x052c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_CRS__ECAT_MDC                        0x0228 0x052c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_CRS__NETC_EMDC                       0x0228 0x052c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH1_CRS__ENCODER_DIAG14                  0x0228 0x052c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_CRS__FLEXIO3_FLEXIO14                0x0228 0x052c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_CRS__GPIO5_IO30                      0x0228 0x052c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH1_CRS__XBAR1_XBAR_INOUT10              0x0228 0x052c 0x0884 0x06 0x02
+#define IMX94_PAD_ETH1_CRS__SINC_FILTER_GLUE1_BREAK         0x0228 0x052c 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH1_COL__NETC_PINMUX_ETH1_COL            0x022c 0x0530 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_COL__ECAT_MDIO                       0x022c 0x0530 0x0628 0x01 0x01
+#define IMX94_PAD_ETH1_COL__NETC_EMDIO                      0x022c 0x0530 0x0678 0x02 0x04
+#define IMX94_PAD_ETH1_COL__ENCODER_DIAG15                  0x022c 0x0530 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_COL__FLEXIO3_FLEXIO15                0x022c 0x0530 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_COL__GPIO5_IO31                      0x022c 0x0530 0x0000 0x05 0x00
+#define IMX94_PAD_ETH1_COL__XBAR1_XBAR_INOUT11              0x022c 0x0530 0x0888 0x06 0x02
+#define IMX94_PAD_ETH1_COL__SINC_FILTER_GLUE2_BREAK         0x022c 0x0530 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_CLK__USDHC1_CLK                       0x0230 0x0534 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_CLK__SAI4_TX_BCLK                     0x0230 0x0534 0x0818 0x01 0x01
+#define IMX94_PAD_SD1_CLK__CAN4_TX                          0x0230 0x0534 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_CLK__NETC_1588MUX_INOUT0              0x0230 0x0534 0x064c 0x03 0x01
+#define IMX94_PAD_SD1_CLK__FLEXIO2_4_1_FLEXIO0              0x0230 0x0534 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_CLK__GPIO4_IO8                        0x0230 0x0534 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_CLK__FLEXPWM3_PWMX0                   0x0230 0x0534 0x06c8 0x06 0x02
+#define IMX94_PAD_SD1_CLK__SINC1_EMCLK0                     0x0230 0x0534 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_CMD__USDHC1_CMD                       0x0234 0x0538 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_CMD__SAI4_RX_BCLK                     0x0234 0x0538 0x080c 0x01 0x01
+#define IMX94_PAD_SD1_CMD__CAN4_RX                          0x0234 0x0538 0x0684 0x02 0x02
+#define IMX94_PAD_SD1_CMD__NETC_1588MUX_INOUT1              0x0234 0x0538 0x0650 0x03 0x01
+#define IMX94_PAD_SD1_CMD__FLEXIO2_4_1_FLEXIO1              0x0234 0x0538 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_CMD__GPIO4_IO9                        0x0234 0x0538 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_CMD__FLEXPWM3_PWMX1                   0x0234 0x0538 0x06cc 0x06 0x02
+#define IMX94_PAD_SD1_CMD__SINC1_EMBIT0                     0x0234 0x0538 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA0__USDHC1_DATA0                   0x0238 0x053c 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA0__SAI4_RX_SYNC                   0x0238 0x053c 0x0814 0x01 0x01
+#define IMX94_PAD_SD1_DATA0__CAN5_TX                        0x0238 0x053c 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA0__NETC_1588MUX_INOUT2            0x0238 0x053c 0x0654 0x03 0x01
+#define IMX94_PAD_SD1_DATA0__FLEXIO2_4_1_FLEXIO2            0x0238 0x053c 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA0__GPIO4_IO10                     0x0238 0x053c 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA0__FLEXPWM3_PWMX2                 0x0238 0x053c 0x06d0 0x06 0x01
+#define IMX94_PAD_SD1_DATA0__SINC1_EMCLK1                   0x0238 0x053c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA1__USDHC1_DATA1                   0x023c 0x0540 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA1__SAI4_TX_SYNC                   0x023c 0x0540 0x081c 0x01 0x01
+#define IMX94_PAD_SD1_DATA1__CAN5_RX                        0x023c 0x0540 0x0688 0x02 0x03
+#define IMX94_PAD_SD1_DATA1__NETC_1588MUX_INOUT3            0x023c 0x0540 0x0658 0x03 0x01
+#define IMX94_PAD_SD1_DATA1__FLEXIO2_4_1_FLEXIO3            0x023c 0x0540 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA1__GPIO4_IO11                     0x023c 0x0540 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA1__FLEXPWM3_PWMA3                 0x023c 0x0540 0x06b4 0x06 0x01
+#define IMX94_PAD_SD1_DATA1__SINC1_EMBIT1                   0x023c 0x0540 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA2__USDHC1_DATA2                   0x0240 0x0544 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA2__SAI4_TX_DATA0                  0x0240 0x0544 0x0000 0x01 0x00
+#define IMX94_PAD_SD1_DATA2__PMIC_READY                     0x0240 0x0544 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA2__NETC_1588MUX_INOUT4            0x0240 0x0544 0x065c 0x03 0x01
+#define IMX94_PAD_SD1_DATA2__FLEXIO2_4_1_FLEXIO4            0x0240 0x0544 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA2__GPIO4_IO12                     0x0240 0x0544 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA2__FLEXPWM3_PWMB3                 0x0240 0x0544 0x06c4 0x06 0x01
+#define IMX94_PAD_SD1_DATA2__SINC1_EMCLK2                   0x0240 0x0544 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA3__USDHC1_DATA3                   0x0244 0x0548 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA3__SAI4_RX_DATA0                  0x0244 0x0548 0x0810 0x01 0x01
+#define IMX94_PAD_SD1_DATA3__NETC_1588MUX_INOUT5            0x0244 0x0548 0x0660 0x03 0x01
+#define IMX94_PAD_SD1_DATA3__FLEXIO2_4_1_FLEXIO5            0x0244 0x0548 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA3__GPIO4_IO13                     0x0244 0x0548 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA3__FLEXPWM3_PWMA2                 0x0244 0x0548 0x06b0 0x06 0x01
+#define IMX94_PAD_SD1_DATA3__SINC1_EMBIT2                   0x0244 0x0548 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA4__USDHC1_DATA4                   0x0248 0x054c 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA4__SAI2_RX_DATA0                  0x0248 0x054c 0x07f0 0x01 0x02
+#define IMX94_PAD_SD1_DATA4__NETC_1588MUX_INOUT6            0x0248 0x054c 0x0664 0x03 0x01
+#define IMX94_PAD_SD1_DATA4__FLEXIO2_4_1_FLEXIO6            0x0248 0x054c 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA4__GPIO4_IO14                     0x0248 0x054c 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA4__FLEXPWM3_PWMB2                 0x0248 0x054c 0x06c0 0x06 0x01
+#define IMX94_PAD_SD1_DATA4__SINC1_EMCLK3                   0x0248 0x054c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA5__USDHC1_DATA5                   0x024c 0x0550 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA5__SAI2_TX_DATA0                  0x024c 0x0550 0x0000 0x01 0x00
+#define IMX94_PAD_SD1_DATA5__USDHC1_RESET_B                 0x024c 0x0550 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA5__NETC_1588MUX_INOUT7            0x024c 0x0550 0x0668 0x03 0x01
+#define IMX94_PAD_SD1_DATA5__FLEXIO2_4_1_FLEXIO7            0x024c 0x0550 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA5__GPIO4_IO15                     0x024c 0x0550 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA5__FLEXPWM3_PWMA1                 0x024c 0x0550 0x06ac 0x06 0x01
+#define IMX94_PAD_SD1_DATA5__SINC1_EMBIT3                   0x024c 0x0550 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA6__USDHC1_DATA6                   0x0250 0x0554 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA6__SAI2_TX_BCLK                   0x0250 0x0554 0x07f8 0x01 0x02
+#define IMX94_PAD_SD1_DATA6__USDHC1_CD_B                    0x0250 0x0554 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA6__NETC_1588MUX_INOUT8            0x0250 0x0554 0x066c 0x03 0x01
+#define IMX94_PAD_SD1_DATA6__FLEXIO2_4_1_FLEXIO8            0x0250 0x0554 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA6__GPIO4_IO16                     0x0250 0x0554 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA6__FLEXPWM3_PWMB1                 0x0250 0x0554 0x06bc 0x06 0x01
+#define IMX94_PAD_SD1_DATA6__SINC1_MOD_CLK0                 0x0250 0x0554 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA7__USDHC1_DATA7                   0x0254 0x0558 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA7__SAI2_RX_SYNC                   0x0254 0x0558 0x07f4 0x01 0x02
+#define IMX94_PAD_SD1_DATA7__USDHC1_WP                      0x0254 0x0558 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA7__NETC_1588MUX_INOUT9            0x0254 0x0558 0x0670 0x03 0x01
+#define IMX94_PAD_SD1_DATA7__FLEXIO2_4_1_FLEXIO9            0x0254 0x0558 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA7__GPIO4_IO17                     0x0254 0x0558 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA7__FLEXPWM3_PWMA0                 0x0254 0x0558 0x06a8 0x06 0x01
+#define IMX94_PAD_SD1_DATA7__SINC1_MOD_CLK1                 0x0254 0x0558 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_STROBE__USDHC1_STROBE                 0x0258 0x055c 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_STROBE__SAI2_TX_SYNC                  0x0258 0x055c 0x07fc 0x01 0x02
+#define IMX94_PAD_SD1_STROBE__NETC_1588MUX_INOUT10          0x0258 0x055c 0x0674 0x03 0x01
+#define IMX94_PAD_SD1_STROBE__FLEXIO2_4_1_FLEXIO10          0x0258 0x055c 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_STROBE__GPIO4_IO18                    0x0258 0x055c 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_STROBE__FLEXPWM3_PWMB0                0x0258 0x055c 0x06b8 0x06 0x01
+#define IMX94_PAD_SD1_STROBE__SINC1_MOD_CLK2                0x0258 0x055c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT               0x025c 0x0560 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_VSELECT__SAI4_MCLK                    0x025c 0x0560 0x0808 0x01 0x01
+#define IMX94_PAD_SD2_VSELECT__USDHC2_WP                    0x025c 0x0560 0x0854 0x02 0x02
+#define IMX94_PAD_SD2_VSELECT__NETC_1588MUX_INOUT10         0x025c 0x0560 0x0674 0x03 0x02
+#define IMX94_PAD_SD2_VSELECT__FLEXIO2_4_1_FLEXIO11         0x025c 0x0560 0x0694 0x04 0x01
+#define IMX94_PAD_SD2_VSELECT__GPIO4_IO19                   0x025c 0x0560 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_VSELECT__EXT_CLK1                     0x025c 0x0560 0x0624 0x06 0x01
+#define IMX94_PAD_SD2_VSELECT__XBAR1_XBAR_INOUT12           0x025c 0x0560 0x088c 0x07 0x02
+
+#define IMX94_PAD_XSPI1_DATA0__XSPI1_A_DATA0                0x0260 0x0564 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA0__SAI2_RX_SYNC                 0x0260 0x0564 0x07f4 0x01 0x03
+#define IMX94_PAD_XSPI1_DATA0__XSPI_SLV_DATA0               0x0260 0x0564 0x0908 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA0__FLEXIO1_3_3_FLEXIO0          0x0260 0x0564 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA0__GPIO7_IO16                   0x0260 0x0564 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA1__XSPI1_A_DATA1                0x0264 0x0568 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA1__SAI2_TX_SYNC                 0x0264 0x0568 0x07fc 0x01 0x03
+#define IMX94_PAD_XSPI1_DATA1__XSPI_SLV_DATA1               0x0264 0x0568 0x090c 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA1__FLEXIO1_3_3_FLEXIO1          0x0264 0x0568 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA1__GPIO7_IO17                   0x0264 0x0568 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA2__XSPI1_A_DATA2                0x0268 0x056c 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA2__SAI2_TX_DATA0                0x0268 0x056c 0x0000 0x01 0x00
+#define IMX94_PAD_XSPI1_DATA2__XSPI_SLV_DATA2               0x0268 0x056c 0x0910 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA2__FLEXIO1_3_3_FLEXIO2          0x0268 0x056c 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA2__GPIO7_IO18                   0x0268 0x056c 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA3__XSPI1_A_DATA3                0x026c 0x0570 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA3__SAI2_RX_DATA0                0x026c 0x0570 0x07f0 0x01 0x03
+#define IMX94_PAD_XSPI1_DATA3__SAI2_MCLK                    0x026c 0x0570 0x07e8 0x02 0x02
+#define IMX94_PAD_XSPI1_DATA3__XSPI_SLV_DATA3               0x026c 0x0570 0x0914 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA3__FLEXIO1_3_3_FLEXIO3          0x026c 0x0570 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA3__GPIO7_IO19                   0x026c 0x0570 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA4__XSPI1_A_DATA4                0x0270 0x0574 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA4__SAI4_RX_SYNC                 0x0270 0x0574 0x0814 0x01 0x02
+#define IMX94_PAD_XSPI1_DATA4__XSPI_SLV_DATA4               0x0270 0x0574 0x0918 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA4__FLEXIO1_3_3_FLEXIO4          0x0270 0x0574 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA4__GPIO7_IO20                   0x0270 0x0574 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA5__XSPI1_A_DATA5                0x0274 0x0578 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA5__SAI4_TX_SYNC                 0x0274 0x0578 0x081c 0x01 0x02
+#define IMX94_PAD_XSPI1_DATA5__XSPI_SLV_DATA5               0x0274 0x0578 0x091c 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA5__FLEXIO1_3_3_FLEXIO5          0x0274 0x0578 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA5__GPIO7_IO21                   0x0274 0x0578 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA6__XSPI1_A_DATA6                0x0278 0x057c 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA6__SAI4_TX_DATA0                0x0278 0x057c 0x0000 0x01 0x00
+#define IMX94_PAD_XSPI1_DATA6__XSPI_SLV_DATA6               0x0278 0x057c 0x0920 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA6__FLEXIO1_3_3_FLEXIO6          0x0278 0x057c 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA6__GPIO7_IO22                   0x0278 0x057c 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA7__XSPI1_A_DATA7                0x027c 0x0580 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA7__SAI4_RX_DATA0                0x027c 0x0580 0x0810 0x01 0x02
+#define IMX94_PAD_XSPI1_DATA7__SAI4_MCLK                    0x027c 0x0580 0x0808 0x02 0x02
+#define IMX94_PAD_XSPI1_DATA7__XSPI_SLV_DATA7               0x027c 0x0580 0x0924 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA7__FLEXIO1_3_3_FLEXIO7          0x027c 0x0580 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA7__GPIO7_IO23                   0x027c 0x0580 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DQS__XSPI1_A_DQS                    0x0280 0x0584 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DQS__SAI2_TX_BCLK                   0x0280 0x0584 0x07f8 0x01 0x03
+#define IMX94_PAD_XSPI1_DQS__XSPI_SLV_DQS                   0x0280 0x0584 0x0900 0x03 0x01
+#define IMX94_PAD_XSPI1_DQS__FLEXIO1_3_3_FLEXIO8            0x0280 0x0584 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DQS__GPIO7_IO24                     0x0280 0x0584 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_SCLK__XSPI1_A_SCLK                  0x0284 0x0588 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_SCLK__SAI4_TX_BCLK                  0x0284 0x0588 0x0818 0x01 0x02
+#define IMX94_PAD_XSPI1_SCLK__XSPI_SLV_CLK                  0x0284 0x0588 0x0904 0x03 0x01
+#define IMX94_PAD_XSPI1_SCLK__FLEXIO1_3_3_FLEXIO9           0x0284 0x0588 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_SCLK__GPIO7_IO25                    0x0284 0x0588 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_SS0_B__XSPI1_A_SS0_B                0x0288 0x058c 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_SS0_B__SAI4_RX_BCLK                 0x0288 0x058c 0x080c 0x01 0x02
+#define IMX94_PAD_XSPI1_SS0_B__XSPI_SLV_CS                  0x0288 0x058c 0x08fc 0x03 0x01
+#define IMX94_PAD_XSPI1_SS0_B__FLEXIO1_3_3_FLEXIO10         0x0288 0x058c 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_SS0_B__GPIO7_IO26                   0x0288 0x058c 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_SS1_B__XSPI1_A_SS1_B                0x028c 0x0590 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_SS1_B__SAI2_RX_BCLK                 0x028c 0x0590 0x07ec 0x01 0x02
+#define IMX94_PAD_XSPI1_SS1_B__FLEXPWM3_PWMX3               0x028c 0x0590 0x0000 0x03 0x00
+#define IMX94_PAD_XSPI1_SS1_B__FLEXIO1_3_3_FLEXIO11         0x028c 0x0590 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_SS1_B__GPIO7_IO27                   0x028c 0x0590 0x0000 0x05 0x00
+#define IMX94_PAD_XSPI1_SS1_B__SINC1_MOD_CLK0               0x028c 0x0590 0x0000 0x06 0x00
+#define IMX94_PAD_XSPI1_SS1_B__SINC_FILTER_GLUE1_BREAK      0x028c 0x0590 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_CD_B__USDHC2_CD_B                     0x0290 0x0594 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_CD_B__NETC_PINMUX_ETH4_RX_CTL         0x0290 0x0594 0x0634 0x01 0x01
+#define IMX94_PAD_SD2_CD_B__I3C2_SCL                        0x0290 0x0594 0x0720 0x02 0x03
+#define IMX94_PAD_SD2_CD_B__NETC_1588MUX_INOUT9             0x0290 0x0594 0x0670 0x03 0x02
+#define IMX94_PAD_SD2_CD_B__FLEXIO2_4_2_FLEXIO0             0x0290 0x0594 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_CD_B__GPIO4_IO20                      0x0290 0x0594 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_CD_B__XBAR1_XBAR_INOUT13              0x0290 0x0594 0x0890 0x06 0x02
+#define IMX94_PAD_SD2_CD_B__SINC2_EMCLK0                    0x0290 0x0594 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_CLK__USDHC2_CLK                       0x0294 0x0598 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_CLK__NETC_PINMUX_ETH4_TX_CLK          0x0294 0x0598 0x0648 0x01 0x01
+#define IMX94_PAD_SD2_CLK__I3C2_SDA                         0x0294 0x0598 0x0724 0x02 0x03
+#define IMX94_PAD_SD2_CLK__NETC_1588MUX_INOUT8              0x0294 0x0598 0x066c 0x03 0x02
+#define IMX94_PAD_SD2_CLK__FLEXIO2_4_2_FLEXIO1              0x0294 0x0598 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_CLK__GPIO4_IO21                       0x0294 0x0598 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_CLK__OBSERVE0                         0x0294 0x0598 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_CLK__SINC2_EMBIT0                     0x0294 0x0598 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_CMD__USDHC2_CMD                       0x0298 0x059c 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_CMD__NETC_PINMUX_ETH4_TX_CTL          0x0298 0x059c 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_CMD__I3C2_PUR                         0x0298 0x059c 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_CMD__I3C2_PUR_B                       0x0298 0x059c 0x0000 0x03 0x00
+#define IMX94_PAD_SD2_CMD__FLEXIO2_4_2_FLEXIO2              0x0298 0x059c 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_CMD__GPIO4_IO22                       0x0298 0x059c 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_CMD__OBSERVE1                         0x0298 0x059c 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_CMD__SINC2_EMCLK1                     0x0298 0x059c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA0__USDHC2_DATA0                   0x029c 0x05a0 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA0__NETC_PINMUX_ETH4_TXD0          0x029c 0x05a0 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA0__CAN2_TX                        0x029c 0x05a0 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_DATA0__NETC_1588MUX_INOUT7            0x029c 0x05a0 0x0668 0x03 0x02
+#define IMX94_PAD_SD2_DATA0__FLEXIO2_4_2_FLEXIO3            0x029c 0x05a0 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA0__GPIO4_IO23                     0x029c 0x05a0 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA0__OBSERVE2                       0x029c 0x05a0 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_DATA0__SINC2_EMBIT1                   0x029c 0x05a0 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA1__USDHC2_DATA1                   0x02a0 0x05a4 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA1__NETC_PINMUX_ETH4_TXD1          0x02a0 0x05a4 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA1__CAN2_RX                        0x02a0 0x05a4 0x067c 0x02 0x04
+#define IMX94_PAD_SD2_DATA1__NETC_1588MUX_INOUT6            0x02a0 0x05a4 0x0664 0x03 0x02
+#define IMX94_PAD_SD2_DATA1__FLEXIO2_4_2_FLEXIO4            0x02a0 0x05a4 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA1__GPIO4_IO24                     0x02a0 0x05a4 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA1__XBAR1_XBAR_INOUT14             0x02a0 0x05a4 0x0894 0x06 0x02
+#define IMX94_PAD_SD2_DATA1__SINC2_EMCLK2                   0x02a0 0x05a4 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA2__USDHC2_DATA2                   0x02a4 0x05a8 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA2__NETC_PINMUX_ETH4_TXD2          0x02a4 0x05a8 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA2__MQS2_RIGHT                     0x02a4 0x05a8 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_DATA2__NETC_1588MUX_INOUT5            0x02a4 0x05a8 0x0660 0x03 0x02
+#define IMX94_PAD_SD2_DATA2__FLEXIO2_4_2_FLEXIO5            0x02a4 0x05a8 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA2__GPIO4_IO25                     0x02a4 0x05a8 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA2__XBAR1_XBAR_INOUT15             0x02a4 0x05a8 0x0898 0x06 0x01
+#define IMX94_PAD_SD2_DATA2__SINC2_EMBIT2                   0x02a4 0x05a8 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA3__USDHC2_DATA3                   0x02a8 0x05ac 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA3__NETC_PINMUX_ETH4_TXD3          0x02a8 0x05ac 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA3__MQS2_LEFT                      0x02a8 0x05ac 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_DATA3__LPTMR2_ALT0                    0x02a8 0x05ac 0x0780 0x03 0x01
+#define IMX94_PAD_SD2_DATA3__FLEXIO2_4_2_FLEXIO6            0x02a8 0x05ac 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA3__GPIO4_IO26                     0x02a8 0x05ac 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA3__XBAR1_XBAR_INOUT16             0x02a8 0x05ac 0x089c 0x06 0x01
+#define IMX94_PAD_SD2_DATA3__SINC2_EMCLK3                   0x02a8 0x05ac 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_RESET_B__USDHC2_RESET_B               0x02ac 0x05b0 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_RESET_B__NETC_PINMUX_ETH4_RXD0        0x02ac 0x05b0 0x0638 0x01 0x01
+#define IMX94_PAD_SD2_RESET_B__NETC_1588MUX_INOUT4          0x02ac 0x05b0 0x065c 0x02 0x02
+#define IMX94_PAD_SD2_RESET_B__LPTMR2_ALT1                  0x02ac 0x05b0 0x0784 0x03 0x01
+#define IMX94_PAD_SD2_RESET_B__FLEXIO2_4_2_FLEXIO7          0x02ac 0x05b0 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_RESET_B__GPIO4_IO27                   0x02ac 0x05b0 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_RESET_B__XBAR1_XBAR_INOUT17           0x02ac 0x05b0 0x08a0 0x06 0x01
+#define IMX94_PAD_SD2_RESET_B__SINC2_EMBIT3                 0x02ac 0x05b0 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO0__USDHC2_WP                      0x02b0 0x05b4 0x0854 0x00 0x03
+#define IMX94_PAD_SD2_GPIO0__NETC_PINMUX_ETH4_RXD1          0x02b0 0x05b4 0x063c 0x01 0x01
+#define IMX94_PAD_SD2_GPIO0__NETC_1588MUX_INOUT3            0x02b0 0x05b4 0x0658 0x03 0x02
+#define IMX94_PAD_SD2_GPIO0__FLEXIO2_4_2_FLEXIO8            0x02b0 0x05b4 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO0__GPIO4_IO28                     0x02b0 0x05b4 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO0__XBAR1_XBAR_INOUT18             0x02b0 0x05b4 0x08a4 0x06 0x01
+#define IMX94_PAD_SD2_GPIO0__SINC2_MOD_CLK1                 0x02b0 0x05b4 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO1__LPTMR2_ALT2                    0x02b4 0x05b8 0x0788 0x00 0x01
+#define IMX94_PAD_SD2_GPIO1__NETC_PINMUX_ETH4_RXD2          0x02b4 0x05b8 0x0640 0x01 0x01
+#define IMX94_PAD_SD2_GPIO1__ECAT_CLK25                     0x02b4 0x05b8 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_GPIO1__NETC_1588MUX_INOUT2            0x02b4 0x05b8 0x0654 0x03 0x02
+#define IMX94_PAD_SD2_GPIO1__FLEXIO2_4_2_FLEXIO9            0x02b4 0x05b8 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO1__GPIO4_IO29                     0x02b4 0x05b8 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO1__XBAR1_XBAR_INOUT19             0x02b4 0x05b8 0x08a8 0x06 0x01
+#define IMX94_PAD_SD2_GPIO1__SINC2_MOD_CLK0                 0x02b4 0x05b8 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO2__NETC_PINMUX_ETH4_RXD3          0x02b8 0x05bc 0x0644 0x01 0x01
+#define IMX94_PAD_SD2_GPIO2__CAN5_TX                        0x02b8 0x05bc 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_GPIO2__NETC_1588MUX_INOUT1            0x02b8 0x05bc 0x0650 0x03 0x02
+#define IMX94_PAD_SD2_GPIO2__FLEXIO2_4_2_FLEXIO10           0x02b8 0x05bc 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO2__GPIO4_IO30                     0x02b8 0x05bc 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO2__XBAR1_XBAR_INOUT20             0x02b8 0x05bc 0x08ac 0x06 0x01
+#define IMX94_PAD_SD2_GPIO2__SINC2_MOD_CLK2                 0x02b8 0x05bc 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO3__NETC_PINMUX_ETH4_RX_CLK        0x02bc 0x05c0 0x0630 0x01 0x01
+#define IMX94_PAD_SD2_GPIO3__CAN5_RX                        0x02bc 0x05c0 0x0688 0x02 0x04
+#define IMX94_PAD_SD2_GPIO3__NETC_1588MUX_INOUT0            0x02bc 0x05c0 0x064c 0x03 0x02
+#define IMX94_PAD_SD2_GPIO3__FLEXIO2_4_2_FLEXIO11           0x02bc 0x05c0 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO3__GPIO4_IO31                     0x02bc 0x05c0 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO3__XBAR1_XBAR_INOUT21             0x02bc 0x05c0 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_GPIO3__SINC_FILTER_GLUE2_BREAK        0x02bc 0x05c0 0x0000 0x07 0x00
+
+#define IMX94_PAD_I2C1_SCL__LPI2C1_SCL                      0x02c0 0x05c4 0x0000 0x00 0x00
+#define IMX94_PAD_I2C1_SCL__I3C1_SCL                        0x02c0 0x05c4 0x0000 0x01 0x00
+#define IMX94_PAD_I2C1_SCL__LPUART1_DCD_B                   0x02c0 0x05c4 0x0000 0x02 0x00
+#define IMX94_PAD_I2C1_SCL__TPM2_CH0                        0x02c0 0x05c4 0x0000 0x03 0x00
+#define IMX94_PAD_I2C1_SCL__SAI1_RX_SYNC                    0x02c0 0x05c4 0x0000 0x04 0x00
+#define IMX94_PAD_I2C1_SCL__GPIO1_IO0                       0x02c0 0x05c4 0x0000 0x05 0x00
+
+#define IMX94_PAD_I2C1_SDA__LPI2C1_SDA                      0x02c4 0x05c8 0x0000 0x00 0x00
+#define IMX94_PAD_I2C1_SDA__I3C1_SDA                        0x02c4 0x05c8 0x0000 0x01 0x00
+#define IMX94_PAD_I2C1_SDA__LPUART1_RIN_B                   0x02c4 0x05c8 0x0000 0x02 0x00
+#define IMX94_PAD_I2C1_SDA__TPM2_CH1                        0x02c4 0x05c8 0x0000 0x03 0x00
+#define IMX94_PAD_I2C1_SDA__SAI1_RX_BCLK                    0x02c4 0x05c8 0x0000 0x04 0x00
+#define IMX94_PAD_I2C1_SDA__GPIO1_IO1                       0x02c4 0x05c8 0x0000 0x05 0x00
+
+#define IMX94_PAD_I2C2_SCL__LPI2C2_SCL                      0x02c8 0x05cc 0x0000 0x00 0x00
+#define IMX94_PAD_I2C2_SCL__I3C1_PUR                        0x02c8 0x05cc 0x0000 0x01 0x00
+#define IMX94_PAD_I2C2_SCL__LPUART2_DCD_B                   0x02c8 0x05cc 0x0000 0x02 0x00
+#define IMX94_PAD_I2C2_SCL__TPM2_CH2                        0x02c8 0x05cc 0x0000 0x03 0x00
+#define IMX94_PAD_I2C2_SCL__GPT1_CLK                        0x02c8 0x05cc 0x060c 0x04 0x00
+#define IMX94_PAD_I2C2_SCL__GPIO1_IO2                       0x02c8 0x05cc 0x0000 0x05 0x00
+#define IMX94_PAD_I2C2_SCL__I3C1_PUR_B                      0x02c8 0x05cc 0x0000 0x06 0x00
+#define IMX94_PAD_I2C2_SCL__LPIT1_TRIGGER0                  0x02c8 0x05cc 0x0000 0x07 0x00
+
+#define IMX94_PAD_I2C2_SDA__LPI2C2_SDA                      0x02cc 0x05d0 0x0000 0x00 0x00
+#define IMX94_PAD_I2C2_SDA__LPI2C1_HREQ                     0x02cc 0x05d0 0x0000 0x01 0x00
+#define IMX94_PAD_I2C2_SDA__LPUART2_RIN_B                   0x02cc 0x05d0 0x0000 0x02 0x00
+#define IMX94_PAD_I2C2_SDA__TPM2_CH3                        0x02cc 0x05d0 0x0000 0x03 0x00
+#define IMX94_PAD_I2C2_SDA__SAI1_MCLK                       0x02cc 0x05d0 0x0620 0x04 0x00
+#define IMX94_PAD_I2C2_SDA__GPIO1_IO3                       0x02cc 0x05d0 0x0000 0x05 0x00
+#define IMX94_PAD_I2C2_SDA__EWM_OUT_B                       0x02cc 0x05d0 0x0000 0x06 0x00
+#define IMX94_PAD_I2C2_SDA__LPIT1_TRIGGER1                  0x02cc 0x05d0 0x0000 0x07 0x00
+
+#define IMX94_PAD_UART1_RXD__LPUART1_RX                     0x02d0 0x05d4 0x0000 0x00 0x00
+#define IMX94_PAD_UART1_RXD__S400_UART_RX                   0x02d0 0x05d4 0x0000 0x01 0x00
+#define IMX94_PAD_UART1_RXD__LPSPI2_SIN                     0x02d0 0x05d4 0x0000 0x02 0x00
+#define IMX94_PAD_UART1_RXD__TPM1_CH0                       0x02d0 0x05d4 0x0000 0x03 0x00
+#define IMX94_PAD_UART1_RXD__GPT1_CAPTURE1                  0x02d0 0x05d4 0x0000 0x04 0x00
+#define IMX94_PAD_UART1_RXD__GPIO1_IO4                      0x02d0 0x05d4 0x0000 0x05 0x00
+
+#define IMX94_PAD_UART1_TXD__LPUART1_TX                     0x02d4 0x05d8 0x0000 0x00 0x00
+#define IMX94_PAD_UART1_TXD__S400_UART_TX                   0x02d4 0x05d8 0x0000 0x01 0x00
+#define IMX94_PAD_UART1_TXD__LPSPI2_PCS0                    0x02d4 0x05d8 0x0000 0x02 0x00
+#define IMX94_PAD_UART1_TXD__TPM1_CH1                       0x02d4 0x05d8 0x0000 0x03 0x00
+#define IMX94_PAD_UART1_TXD__GPT1_COMPARE1                  0x02d4 0x05d8 0x0000 0x04 0x00
+#define IMX94_PAD_UART1_TXD__GPIO1_IO5                      0x02d4 0x05d8 0x0000 0x05 0x00
+
+#define IMX94_PAD_UART2_RXD__LPUART2_RX                     0x02d8 0x05dc 0x0000 0x00 0x00
+#define IMX94_PAD_UART2_RXD__LPUART1_CTS_B                  0x02d8 0x05dc 0x0000 0x01 0x00
+#define IMX94_PAD_UART2_RXD__LPSPI2_SOUT                    0x02d8 0x05dc 0x0000 0x02 0x00
+#define IMX94_PAD_UART2_RXD__TPM1_CH2                       0x02d8 0x05dc 0x0000 0x03 0x00
+#define IMX94_PAD_UART2_RXD__SAI1_MCLK                      0x02d8 0x05dc 0x0620 0x04 0x01
+#define IMX94_PAD_UART2_RXD__GPIO1_IO6                      0x02d8 0x05dc 0x0000 0x05 0x00
+#define IMX94_PAD_UART2_RXD__GPT1_CLK                       0x02d8 0x05dc 0x060c 0x06 0x01
+#define IMX94_PAD_UART2_RXD__LPIT1_TRIGGER2                 0x02d8 0x05dc 0x0000 0x07 0x00
+
+#define IMX94_PAD_UART2_TXD__LPUART2_TX                     0x02dc 0x05e0 0x0000 0x00 0x00
+#define IMX94_PAD_UART2_TXD__LPUART1_RTS_B                  0x02dc 0x05e0 0x0000 0x01 0x00
+#define IMX94_PAD_UART2_TXD__LPSPI2_SCK                     0x02dc 0x05e0 0x0000 0x02 0x00
+#define IMX94_PAD_UART2_TXD__TPM1_CH3                       0x02dc 0x05e0 0x0000 0x03 0x00
+#define IMX94_PAD_UART2_TXD__GPIO1_IO7                      0x02dc 0x05e0 0x0000 0x05 0x00
+
+#define IMX94_PAD_PDM_CLK__PDM_CLK                          0x02e0 0x05e4 0x0000 0x00 0x00
+#define IMX94_PAD_PDM_CLK__MQS1_LEFT                        0x02e0 0x05e4 0x0000 0x01 0x00
+#define IMX94_PAD_PDM_CLK__LPTMR1_ALT0                      0x02e0 0x05e4 0x0000 0x04 0x00
+#define IMX94_PAD_PDM_CLK__GPIO1_IO8                        0x02e0 0x05e4 0x0000 0x05 0x00
+#define IMX94_PAD_PDM_CLK__CAN1_TX                          0x02e0 0x05e4 0x0000 0x06 0x00
+#define IMX94_PAD_PDM_CLK__EWM_OUT_B                        0x02e0 0x05e4 0x0000 0x07 0x00
+
+#define IMX94_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0          0x02e4 0x05e8 0x0610 0x00 0x02
+#define IMX94_PAD_PDM_BIT_STREAM0__MQS1_RIGHT               0x02e4 0x05e8 0x0000 0x01 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1              0x02e4 0x05e8 0x0000 0x02 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK              0x02e4 0x05e8 0x0000 0x03 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__LPTMR1_ALT1              0x02e4 0x05e8 0x0000 0x04 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__GPIO1_IO9                0x02e4 0x05e8 0x0000 0x05 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__CAN1_RX                  0x02e4 0x05e8 0x0608 0x06 0x00
+
+#define IMX94_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1          0x02e8 0x05ec 0x0614 0x00 0x03
+#define IMX94_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI             0x02e8 0x05ec 0x0000 0x01 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1              0x02e8 0x05ec 0x0000 0x02 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK              0x02e8 0x05ec 0x0000 0x03 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__LPTMR1_ALT2              0x02e8 0x05ec 0x0000 0x04 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__GPIO1_IO10               0x02e8 0x05ec 0x0000 0x05 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__EXT_CLK1                 0x02e8 0x05ec 0x0624 0x06 0x00
+
+#define IMX94_PAD_SAI1_TXFS__SAI1_TX_SYNC                   0x02ec 0x05f0 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_TXFS__SAI1_TX_DATA1                  0x02ec 0x05f0 0x0000 0x01 0x00
+#define IMX94_PAD_SAI1_TXFS__LPSPI1_PCS0                    0x02ec 0x05f0 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_TXFS__LPUART2_DTR_B                  0x02ec 0x05f0 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_TXFS__MQS1_LEFT                      0x02ec 0x05f0 0x0000 0x04 0x00
+#define IMX94_PAD_SAI1_TXFS__GPIO1_IO11                     0x02ec 0x05f0 0x0000 0x05 0x00
+#define IMX94_PAD_SAI1_TXFS__EWM_OUT_B                      0x02ec 0x05f0 0x0000 0x06 0x00
+
+#define IMX94_PAD_SAI1_TXC__SAI1_TX_BCLK                    0x02f0 0x05f4 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_TXC__LPUART2_CTS_B                   0x02f0 0x05f4 0x0000 0x01 0x00
+#define IMX94_PAD_SAI1_TXC__LPSPI1_SIN                      0x02f0 0x05f4 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_TXC__LPUART1_DSR_B                   0x02f0 0x05f4 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_TXC__CAN1_RX                         0x02f0 0x05f4 0x0608 0x04 0x01
+#define IMX94_PAD_SAI1_TXC__GPIO1_IO12                      0x02f0 0x05f4 0x0000 0x05 0x00
+
+#define IMX94_PAD_SAI1_TXD0__SAI1_TX_DATA0                  0x02f4 0x05f8 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_TXD0__LPUART2_RTS_B                  0x02f4 0x05f8 0x0000 0x01 0x00
+#define IMX94_PAD_SAI1_TXD0__LPSPI1_SCK                     0x02f4 0x05f8 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_TXD0__LPUART1_DTR_B                  0x02f4 0x05f8 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_TXD0__CAN1_TX                        0x02f4 0x05f8 0x0000 0x04 0x00
+#define IMX94_PAD_SAI1_TXD0__GPIO1_IO13                     0x02f4 0x05f8 0x0000 0x05 0x00
+
+#define IMX94_PAD_SAI1_RXD0__SAI1_RX_DATA0                  0x02f8 0x05fc 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_RXD0__SAI1_MCLK                      0x02f8 0x05fc 0x0620 0x01 0x02
+#define IMX94_PAD_SAI1_RXD0__LPSPI1_SOUT                    0x02f8 0x05fc 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_RXD0__LPUART2_DSR_B                  0x02f8 0x05fc 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_RXD0__MQS1_RIGHT                     0x02f8 0x05fc 0x0000 0x04 0x00
+#define IMX94_PAD_SAI1_RXD0__GPIO1_IO14                     0x02f8 0x05fc 0x0000 0x05 0x00
+#define IMX94_PAD_SAI1_RXD0__LPIT1_TRIGGER3                 0x02f8 0x05fc 0x0000 0x07 0x00
+
+#define IMX94_PAD_WDOG_ANY__WDOG_ANY                        0x02fc 0x0600 0x0000 0x00 0x00
+#define IMX94_PAD_WDOG_ANY__FCCU_EOUT1                      0x02fc 0x0600 0x0000 0x01 0x00
+#define IMX94_PAD_WDOG_ANY__GPIO1_IO15                      0x02fc 0x0600 0x0000 0x05 0x00
+#endif /* __DTS_IMX94_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx94-power.h b/arch/arm64/boot/dts/freescale/imx94-power.h
new file mode 100644
index 000000000000..5209afed60ed
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx94-power.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ *  Copyright 2024-2025 NXP
+ */
+
+#ifndef __IMX94_POWER_H
+#define __IMX94_POWER_H
+
+#define IMX94_PD_ANA		0
+#define IMX94_PD_AON		1
+#define IMX94_PD_BBSM		2
+#define IMX94_PD_M71		3
+#define IMX94_PD_CCMSRCGPC	4
+#define IMX94_PD_A55C0		5
+#define IMX94_PD_A55C1		6
+#define IMX94_PD_A55C2		7
+#define IMX94_PD_A55C3		8
+#define IMX94_PD_A55P		9
+#define IMX94_PD_DDR		10
+#define IMX94_PD_DISPLAY	11
+#define IMX94_PD_M70		12
+#define IMX94_PD_HSIO_TOP	13
+#define IMX94_PD_HSIO_WAON	14
+#define IMX94_PD_NETC		15
+#define IMX94_PD_NOC		16
+#define IMX94_PD_NPU		17
+#define IMX94_PD_WAKEUP		18
+
+#define IMX94_PERF_M33		0
+#define IMX94_PERF_M33S		1
+#define IMX94_PERF_WAKEUP	2
+#define IMX94_PERF_M70		3
+#define IMX94_PERF_M71		4
+#define IMX94_PERF_DRAM		5
+#define IMX94_PERF_HSIO		6
+#define IMX94_PERF_NPU		7
+#define IMX94_PERF_NOC		8
+#define IMX94_PERF_A55		9
+#define IMX94_PERF_DISP		10
+
+#endif /* __IMX94_POWER_H */
diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi
new file mode 100644
index 000000000000..d4a880496b0e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx94.dtsi
@@ -0,0 +1,1194 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "imx94-clock.h"
+#include "imx94-pinfunc.h"
+#include "imx94-power.h"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	osc_24m: clock-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "dummy";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	sai1_mclk: clock-sai1-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai1_mclk";
+	};
+
+	sai2_mclk: clock-sai2-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai2_mclk";
+	};
+
+	sai3_mclk: clock-sai3-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai3_mclk";
+	};
+
+	sai4_mclk: clock-sai4-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai4_mclk";
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>, <&mu2 5 1>;
+			shmem = <&scmi_buf0>, <&scmi_buf1>;
+			arm,max-rx-timeout-ms = <5000>;
+
+			scmi_devpd: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_sys_power: protocol@12 {
+				reg = <0x12>;
+			};
+
+			scmi_perf: protocol@13 {
+				reg = <0x13>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_iomuxc: protocol@19 {
+				reg = <0x19>;
+			};
+
+			scmi_bbm: protocol@81 {
+				reg = <0x81>;
+			};
+
+			scmi_misc: protocol@84 {
+				reg = <0x84>;
+			};
+		};
+	};
+
+	mqs1: mqs1 {
+		compatible = "fsl,imx943-aonmix-mqs";
+		status = "disabled";
+	};
+
+	mqs2: mqs2 {
+		compatible = "fsl,imx943-wakeupmix-mqs";
+		status = "disabled";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		interrupt-parent = <&gic>;
+		arm,no-tick-in-suspend;
+	};
+
+	gic: interrupt-controller@48000000 {
+		compatible = "arm,gic-v3";
+		reg = <0 0x48000000 0 0x10000>,
+		      <0 0x48060000 0 0xc0000>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-noncoherent;
+		interrupt-parent = <&gic>;
+
+		its: msi-controller@48040000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0 0x48040000 0 0x20000>;
+			#msi-cells = <1>;
+			dma-noncoherent;
+			msi-controller;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		aips2: bus@42000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x42000000 0x0 0x800000>;
+			ranges = <0x42000000 0x0 0x42000000 0x8000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			edma2: dma-controller@42000000 {
+				compatible = "fsl,imx94-edma5", "fsl,imx95-edma5";
+				reg = <0x42000000 0x210000>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts-extended = <&a55_irqsteer 0>, <&a55_irqsteer 1>,
+						      <&a55_irqsteer 2>, <&a55_irqsteer 3>,
+						      <&a55_irqsteer 4>, <&a55_irqsteer 5>,
+						      <&a55_irqsteer 6>, <&a55_irqsteer 7>,
+						      <&a55_irqsteer 8>, <&a55_irqsteer 9>,
+						      <&a55_irqsteer 10>, <&a55_irqsteer 11>,
+						      <&a55_irqsteer 12>, <&a55_irqsteer 13>,
+						      <&a55_irqsteer 14>, <&a55_irqsteer 15>,
+						      <&a55_irqsteer 16>, <&a55_irqsteer 17>,
+						      <&a55_irqsteer 18>, <&a55_irqsteer 19>,
+						      <&a55_irqsteer 20>, <&a55_irqsteer 21>,
+						      <&a55_irqsteer 22>, <&a55_irqsteer 23>,
+						      <&a55_irqsteer 24>, <&a55_irqsteer 25>,
+						      <&a55_irqsteer 26>, <&a55_irqsteer 27>,
+						      <&a55_irqsteer 28>, <&a55_irqsteer 29>,
+						      <&a55_irqsteer 30>, <&a55_irqsteer 31>,
+						      <&a55_irqsteer 64>, <&a55_irqsteer 65>,
+						      <&a55_irqsteer 66>, <&a55_irqsteer 67>,
+						      <&a55_irqsteer 68>, <&a55_irqsteer 69>,
+						      <&a55_irqsteer 70>, <&a55_irqsteer 71>,
+						      <&a55_irqsteer 72>, <&a55_irqsteer 73>,
+						      <&a55_irqsteer 74>, <&a55_irqsteer 75>,
+						      <&a55_irqsteer 76>, <&a55_irqsteer 77>,
+						      <&a55_irqsteer 78>, <&a55_irqsteer 79>,
+						      <&a55_irqsteer 80>, <&a55_irqsteer 81>,
+						      <&a55_irqsteer 82>, <&a55_irqsteer 83>,
+						      <&a55_irqsteer 84>, <&a55_irqsteer 85>,
+						      <&a55_irqsteer 86>, <&a55_irqsteer 87>,
+						      <&a55_irqsteer 88>, <&a55_irqsteer 89>,
+						      <&a55_irqsteer 90>, <&a55_irqsteer 91>,
+						      <&a55_irqsteer 92>, <&a55_irqsteer 93>,
+						      <&a55_irqsteer 94>, <&a55_irqsteer 95>,
+						      <&gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			mu10: mailbox@42430000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42430000 0x10000>;
+				interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			i3c2: i3c@42520000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_I3C2SLOW>,
+					 <&dummy>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C3>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 5 0 0>, <&edma2 6 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C4>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 4 0 0>, <&edma4 5 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi3: spi@42550000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI3>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 7 0 0>, <&edma2 8 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI4>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 6 0 0>, <&edma4 7 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart3: serial@42570000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42570000 0x1000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART3>;
+				clock-names = "ipg";
+				dmas = <&edma2 10 0 FSL_EDMA_RX>, <&edma2 9 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart4: serial@42580000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42580000 0x1000>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART4>;
+				clock-names = "ipg";
+				dmas = <&edma4 10 0 FSL_EDMA_RX>, <&edma4 9 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart5: serial@42590000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42590000 0x1000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART5>;
+				clock-names = "ipg";
+				dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 11 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart6: serial@425a0000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x425a0000 0x1000>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART6>;
+				clock-names = "ipg";
+				dmas = <&edma4 12 0 FSL_EDMA_RX>, <&edma4 11 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan2: can@425b0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x425b0000 0x10000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN2>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN2>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan3: can@425e0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x425e0000 0x10000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN3>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN3>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan4: can@425f0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x425f0000 0x10000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN4>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN4>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan5: can@42600000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x42600000 0x10000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN5>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN5>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			sai2: sai@42650000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI2>, <&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 30 0 FSL_EDMA_RX>, <&edma2 29 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sai3: sai@42660000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI3>, <&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 32 0 FSL_EDMA_RX>, <&edma2 31 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sai4: sai@42670000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x42670000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI4>, <&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 36 0 FSL_EDMA_RX>, <&edma2 35 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			lpuart7: serial@42690000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42690000 0x1000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART7>;
+				clock-names = "ipg";
+				dmas = <&edma2 46 0 FSL_EDMA_RX>, <&edma2 45 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart8: serial@426a0000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x426a0000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART8>;
+				clock-names = "ipg";
+				dmas = <&edma4 39 0 FSL_EDMA_RX>, <&edma4 38 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C5>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 37 0 0>, <&edma2 38 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C6>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 30 0 0>, <&edma4 31 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C7>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 39 0 0>, <&edma2 40 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C8>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 32 0 0>, <&edma4 33 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi5: spi@426f0000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI5>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 41 0 0>, <&edma2 42 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI6>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 34 0 0>, <&edma4 35 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI7>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 43 0 0>, <&edma2 44 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI8>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 36 0 0>, <&edma4 37 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			mu11: mailbox@42730000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42730000 0x10000>;
+				interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			edma4: dma-controller@42df0000 {
+				compatible = "fsl,imx94-edma5", "fsl,imx95-edma5";
+				reg = <0x42df0000 0x210000>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts-extended = <&a55_irqsteer 128>, <&a55_irqsteer 129>,
+						      <&a55_irqsteer 130>, <&a55_irqsteer 131>,
+						      <&a55_irqsteer 132>, <&a55_irqsteer 133>,
+						      <&a55_irqsteer 134>, <&a55_irqsteer 135>,
+						      <&a55_irqsteer 136>, <&a55_irqsteer 137>,
+						      <&a55_irqsteer 138>, <&a55_irqsteer 139>,
+						      <&a55_irqsteer 140>, <&a55_irqsteer 141>,
+						      <&a55_irqsteer 142>, <&a55_irqsteer 143>,
+						      <&a55_irqsteer 144>, <&a55_irqsteer 145>,
+						      <&a55_irqsteer 146>, <&a55_irqsteer 147>,
+						      <&a55_irqsteer 148>, <&a55_irqsteer 149>,
+						      <&a55_irqsteer 150>, <&a55_irqsteer 151>,
+						      <&a55_irqsteer 152>, <&a55_irqsteer 153>,
+						      <&a55_irqsteer 154>, <&a55_irqsteer 155>,
+						      <&a55_irqsteer 156>, <&a55_irqsteer 157>,
+						      <&a55_irqsteer 158>, <&a55_irqsteer 159>,
+						      <&a55_irqsteer 192>, <&a55_irqsteer 193>,
+						      <&a55_irqsteer 194>, <&a55_irqsteer 195>,
+						      <&a55_irqsteer 196>, <&a55_irqsteer 197>,
+						      <&a55_irqsteer 198>, <&a55_irqsteer 199>,
+						      <&a55_irqsteer 200>, <&a55_irqsteer 201>,
+						      <&a55_irqsteer 202>, <&a55_irqsteer 203>,
+						      <&a55_irqsteer 204>, <&a55_irqsteer 205>,
+						      <&a55_irqsteer 206>, <&a55_irqsteer 207>,
+						      <&a55_irqsteer 208>, <&a55_irqsteer 209>,
+						      <&a55_irqsteer 210>, <&a55_irqsteer 211>,
+						      <&a55_irqsteer 212>, <&a55_irqsteer 213>,
+						      <&a55_irqsteer 214>, <&a55_irqsteer 215>,
+						      <&a55_irqsteer 216>, <&a55_irqsteer 217>,
+						      <&a55_irqsteer 218>, <&a55_irqsteer 219>,
+						      <&a55_irqsteer 220>, <&a55_irqsteer 221>,
+						      <&a55_irqsteer 222>, <&a55_irqsteer 223>,
+						      <&gic GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aips3: bus@42800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0 0x42800000 0 0x800000>;
+			ranges = <0x42800000 0x0 0x42800000 0x800000>,
+				 <0x28000000 0x0 0x28000000 0x1000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			usdhc1: mmc@42850000 {
+				compatible = "fsl,imx94-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42850000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX94_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_USDHC1>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <8>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@42860000 {
+				compatible = "fsl,imx94-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42860000 0x10000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX94_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_USDHC2>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <200000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@42880000 {
+				compatible = "fsl,imx94-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42880000 0x10000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX94_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_USDHC3>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <200000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			lpuart9: serial@42a50000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a50000 0x1000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART10>;
+				clock-names = "ipg";
+				dmas = <&edma2 51 0 FSL_EDMA_RX>, <&edma2 50 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart10: serial@42a60000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a60000 0x1000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART10>;
+				clock-names = "ipg";
+				dmas = <&edma4 47 0 FSL_EDMA_RX>, <&edma4 46 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart11: serial@42a70000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a70000 0x1000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART11>;
+				clock-names = "ipg";
+				dmas = <&edma2 53 0 FSL_EDMA_RX>, <&edma2 52 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart12: serial@42a80000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a80000 0x1000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART12>;
+				clock-names = "ipg";
+				dmas = <&edma4 49 0 FSL_EDMA_RX>, <&edma4 48 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mu12: mailbox@42ac0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42ac0000 0x10000>;
+				interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu13: mailbox@42ae0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42ae0000 0x10000>;
+				interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu14: mailbox@42b00000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b00000 0x10000>;
+				interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu15: mailbox@42b20000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b20000 0x10000>;
+				interrupts = <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu16: mailbox@42b40000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b40000 0x10000>;
+				interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu17: mailbox@42b60000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b60000 0x10000>;
+				interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio2: gpio@43810000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43810000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 4 32>;
+			ngpios = <32>;
+		};
+
+		gpio3: gpio@43820000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43820000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 36 26>;
+			ngpios = <26>;
+		};
+
+		gpio4: gpio@43840000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43840000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 62 4>, <&scmi_iomuxc 4 0 4>,
+				      <&scmi_iomuxc 8 140 12>, <&scmi_iomuxc 20 164 12>;
+			ngpios = <32>;
+		};
+
+		gpio5: gpio@43850000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43850000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 108 32>;
+			ngpios = <32>;
+		};
+
+		gpio6: gpio@43860000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43860000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 66 32>;
+			ngpios = <32>;
+		};
+
+		gpio7: gpio@43870000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43870000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 98 10>, <&scmi_iomuxc 16 152 12>;
+			gpio-reserved-ranges = <10 6>;
+			ngpios = <28>;
+		};
+
+		aips1: bus@44000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x44000000 0x0 0x800000>;
+			ranges = <0x44000000 0x0 0x44000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			edma1: dma-controller@44000000 {
+				compatible = "fsl,imx94-edma3", "fsl,imx93-edma3";
+				reg = <0x44000000 0x210000>;
+				interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "dma";
+				#dma-cells = <3>;
+				dma-channels = <32>;
+			};
+
+			mu1: mailbox@44220000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x44220000 0x10000>;
+				interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@44290000 {
+				compatible = "nxp,imx94-sysctr-timer", "nxp,imx95-sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx94-pwm", "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx94-pwm", "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x1000>;
+				clocks = <&scmi_clk IMX94_CLK_TPM2>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c1: i3c@44330000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>,
+					 <&scmi_clk IMX94_CLK_I3C1SLOW>,
+					 <&dummy>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C1>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 12 0 0>, <&edma1 13 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C2>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 14 0 0>, <&edma1 15 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI2>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 16 0 0>, <&edma1 17 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI2>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 18 0 0>, <&edma1 19 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart1: serial@44380000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44380000 0x1000>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART1>;
+				clock-names = "ipg";
+				dmas = <&edma1 21 0 FSL_EDMA_RX>, <&edma1 20 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart2: serial@44390000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44390000 0x1000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART2>;
+				clock-names = "ipg";
+				dmas = <&edma1 23 0 FSL_EDMA_RX>, <&edma1 22 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan1: can@443a0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x443a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>,
+					 <&scmi_clk IMX94_CLK_CAN1>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN1>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI1>, <&dummy>,
+					<&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 25 0 FSL_EDMA_RX>, <&edma1 24 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx943-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>,
+					 <&scmi_clk IMX94_CLK_PDM>,
+					 <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+					 <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+					 <&dummy>;
+				clock-names = "ipg_clk", "ipg_clk_app",
+					      "pll8k", "pll11k", "clkext3";
+				dmas = <&edma1 6 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>;
+				dma-names = "rx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			adc1: adc@44530000 {
+				compatible = "nxp,imx94-adc", "nxp,imx93-adc";
+				reg = <0x44530000 0x10000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_ADC>;
+				clock-names = "ipg";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			mu2: mailbox@445b0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x445b0000 0x1000>;
+				ranges;
+				interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#mbox-cells = <2>;
+
+				sram0: sram@445b1000 {
+					compatible = "mmio-sram";
+					reg = <0x445b1000 0x400>;
+					ranges = <0x0 0x445b1000 0x400>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scmi_buf0: scmi-sram-section@0 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x0 0x80>;
+					};
+
+					scmi_buf1: scmi-sram-section@80 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x80 0x80>;
+					};
+				};
+			};
+
+			mu3: mailbox@445d0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x445d0000 0x10000>;
+				interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu4: mailbox@445f0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x445f0000 0x10000>;
+				interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu6: mailbox@44630000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x44630000 0x10000>;
+				interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			a55_irqsteer: interrupt-controller@446a0000 {
+				compatible = "fsl,imx94-irqsteer", "fsl,imx-irqsteer";
+				reg = <0x446a0000 0x1000>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "ipg";
+				fsl,channel = <0>;
+				fsl,num-irqs = <960>;
+			};
+		};
+
+		aips4: bus@49000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x49000000 0x0 0x800000>;
+			ranges = <0x49000000 0x0 0x49000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			wdog3: watchdog@49220000 {
+				compatible = "fsl,imx94-wdt", "fsl,imx93-wdt";
+				reg = <0x49220000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				timeout-sec = <40>;
+				fsl,ext-reset-output;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts
new file mode 100644
index 000000000000..c8c3eff9df1a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx943.dtsi"
+
+/ {
+	compatible = "fsl,imx943-evk", "fsl,imx94";
+	model = "NXP i.MX943 EVK board";
+
+	aliases {
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c5 = &lpi2c6;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+	};
+
+	bt_sco_codec: bt-sco-codec {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	dmic: dmic {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_SD2_3V3";
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_audio_pwr: regulator-wm8962-pwr {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "audio-pwr";
+		gpio = <&pcal6416_i2c3_u171 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7f000000>;
+			reusable;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,bitclock-master = <&btcpu>;
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,name = "bt-sco-audio";
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+
+		btcpu: simple-audio-card,cpu {
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+			sound-dai = <&sai3>;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			format = "i2s";
+			link-name = "micfil hifi";
+
+			codec {
+				sound-dai = <&dmic>;
+			};
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		audio-codec = <&wm8962>;
+		audio-cpu = <&sai1>;
+		audio-routing = "Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC",
+			"IN1R", "AMIC";
+		hp-det-gpio = <&pcal6416_i2c3_u48 14 GPIO_ACTIVE_HIGH>;
+		model = "wm8962-audio";
+	};
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+		device_type = "memory";
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pca9670_i2c3: gpio@23 {
+		compatible = "nxp,pca9670";
+		reg = <0x23>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	pca9548_i2c3: i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8962: codec@1a {
+				compatible = "wlf,wm8962";
+				reg = <0x1a>;
+				clocks = <&scmi_clk IMX94_CLK_SAI1>;
+				AVDD-supply = <&reg_audio_pwr>;
+				CPVDD-supply = <&reg_audio_pwr>;
+				DBVDD-supply = <&reg_audio_pwr>;
+				DCVDD-supply = <&reg_audio_pwr>;
+				gpio-cfg = <
+					0x0000 /* 0:Default */
+					0x0000 /* 1:Default */
+					0x0000 /* 2:FN_DMICCLK */
+					0x0000 /* 3:Default */
+					0x0000 /* 4:FN_DMICCDAT */
+					0x0000 /* 5:Default */
+				>;
+				MICVDD-supply = <&reg_audio_pwr>;
+				PLLVDD-supply = <&reg_audio_pwr>;
+				SPKVDD1-supply = <&reg_audio_pwr>;
+				SPKVDD2-supply = <&reg_audio_pwr>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6416_i2c3_u46: gpio@20 {
+				compatible = "nxp,pcal6416";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				sd-card-on-hog {
+					gpios = <13 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+			};
+
+			pcal6416_i2c3_u171: gpio@21 {
+				compatible = "nxp,pcal6416";
+				reg = <0x21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				audio-pwren-hog {
+					gpios = <12 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+
+				mqs-mic-sel-hog {
+					gpios = <11 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-low;
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6416_i2c3_u48: gpio@20 {
+				compatible = "nxp,pcal6416";
+				reg = <0x20>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio3>;
+				interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				pinctrl-0 = <&pinctrl_ioexpander_int>;
+				pinctrl-names = "default";
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6408_i2c3_u172: gpio@20 {
+				compatible = "nxp,pcal6408";
+				reg = <0x20>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio3>;
+				/* shared int pin with u48 */
+				interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+	};
+};
+
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpi2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c6>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pca9544_i2c6: i2c-mux@77 {
+		compatible = "nxp,pca9544";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6416_i2c6_u50: gpio@21 {
+				compatible = "nxp,pcal6416";
+				reg = <0x21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6408_i2c6_u170: gpio@20 {
+				compatible = "nxp,pcal6408";
+				reg = <0x20>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio4>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				pinctrl-0 = <&pinctrl_ioexpander_int2>;
+				pinctrl-names = "default";
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6416_i2c6_u44: gpio@20 {
+				compatible = "nxp,pcal6416";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				/* pdm selection */
+				can-pdm-sel-hog {
+					gpios = <12 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-low;
+				};
+
+				sai3-sel-hog {
+					gpios = <11 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+
+				/* eMMC IOMUX selection */
+				sd1-sel-hog {
+					gpios = <0 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+
+				/* SD card IOMUX selection */
+				sd2-sel-hog {
+					gpios = <1 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+			};
+		};
+	};
+};
+
+&lpuart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&micfil {
+	assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX94_CLK_PDM>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX94_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <49152000>;
+	pinctrl-0 = <&pinctrl_pdm>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX94_CLK_SAI1>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX94_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	pinctrl-0 = <&pinctrl_sai1>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX94_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX94_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	pinctrl-0 = <&pinctrl_sai3>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+
+	pinctrl_ioexpander_int2: ioexpanderint2grp {
+		fsl,pins = <
+			IMX94_PAD_CCM_CLKO4__GPIO4_IO3		0x31e
+		>;
+	};
+
+	pinctrl_ioexpander_int: ioexpanderintgrp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO45__GPIO3_IO13		0x31e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO16__LPI2C3_SDA		0x40000b9e
+			IMX94_PAD_GPIO_IO17__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO18__LPI2C4_SDA		0x40000b9e
+			IMX94_PAD_GPIO_IO19__LPI2C4_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c6: lpi2c6grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO29__LPI2C6_SDA		0x40000b9e
+			IMX94_PAD_GPIO_IO28__LPI2C6_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			IMX94_PAD_PDM_CLK__PDM_CLK			0x31e
+			IMX94_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0	0x31e
+			IMX94_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1	0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX94_PAD_SAI1_TXFS__SAI1_TX_SYNC	0x31e
+			IMX94_PAD_SAI1_TXC__SAI1_TX_BCLK	0x31e
+			IMX94_PAD_SAI1_TXD0__SAI1_TX_DATA0	0x31e
+			IMX94_PAD_SAI1_RXD0__SAI1_RX_DATA0	0x31e
+			IMX94_PAD_I2C2_SDA__SAI1_MCLK		0x31e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO42__SAI3_TX_BCLK	0x31e
+			IMX94_PAD_GPIO_IO56__SAI3_TX_SYNC	0x31e
+			IMX94_PAD_GPIO_IO46__SAI3_RX_DATA0	0x31e
+			IMX94_PAD_GPIO_IO47__SAI3_TX_DATA0	0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			IMX94_PAD_UART1_TXD__LPUART1_TX		0x31e
+			IMX94_PAD_UART1_RXD__LPUART1_RX		0x31e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			IMX94_PAD_SD1_CMD__USDHC1_CMD		0x138e
+			IMX94_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
+			IMX94_PAD_SD1_DATA1__USDHC1_DATA1	0x138e
+			IMX94_PAD_SD1_DATA2__USDHC1_DATA2	0x138e
+			IMX94_PAD_SD1_DATA3__USDHC1_DATA3	0x138e
+			IMX94_PAD_SD1_DATA4__USDHC1_DATA4	0x138e
+			IMX94_PAD_SD1_DATA5__USDHC1_DATA5	0x138e
+			IMX94_PAD_SD1_DATA6__USDHC1_DATA6	0x138e
+			IMX94_PAD_SD1_DATA7__USDHC1_DATA7	0x138e
+			IMX94_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			IMX94_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			IMX94_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			IMX94_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			IMX94_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			IMX94_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			IMX94_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			IMX94_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			IMX94_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			IMX94_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			IMX94_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX94_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			IMX94_PAD_SD1_CMD__USDHC1_CMD		0x138e
+			IMX94_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
+			IMX94_PAD_SD1_DATA1__USDHC1_DATA1	0x138e
+			IMX94_PAD_SD1_DATA2__USDHC1_DATA2	0x138e
+			IMX94_PAD_SD1_DATA3__USDHC1_DATA3	0x138e
+			IMX94_PAD_SD1_DATA4__USDHC1_DATA4	0x138e
+			IMX94_PAD_SD1_DATA5__USDHC1_DATA5	0x138e
+			IMX94_PAD_SD1_DATA6__USDHC1_DATA6	0x138e
+			IMX94_PAD_SD1_DATA7__USDHC1_DATA7	0x138e
+			IMX94_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			IMX94_PAD_SD2_CMD__USDHC2_CMD		0x138e
+			IMX94_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			IMX94_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			IMX94_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			IMX94_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			IMX94_PAD_SD2_CMD__USDHC2_CMD		0x13fe
+			IMX94_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
+			IMX94_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
+			IMX94_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
+			IMX94_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CD_B__GPIO4_IO20		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			IMX94_PAD_SD2_CMD__USDHC2_CMD		0x138e
+			IMX94_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			IMX94_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			IMX94_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			IMX94_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: usdhc2regvmmcgrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_RESET_B__GPIO4_IO27	0x31e
+		>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	bus-width = <4>;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx943.dtsi b/arch/arm64/boot/dts/freescale/imx943.dtsi
new file mode 100644
index 000000000000..45b8da758e87
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx943.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+#include "imx94.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+				wakeup-latency-us = <1500>;
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l0>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l1>;
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x200>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l2>;
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x300>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l3>;
+		};
+
+		l2_cache_l0: l2-cache-l0 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l1: l2-cache-l1 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l2: l2-cache-l2 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l3: l2-cache-l3 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l3_cache: l3-cache {
+			compatible = "cache";
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
new file mode 100644
index 000000000000..148243470dd4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
@@ -0,0 +1,1182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/i3c/i3c.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95.dtsi"
+
+#define FALLING_EDGE		BIT(0)
+#define RISING_EDGE		BIT(1)
+
+#define BRD_SM_CTRL_SD3_WAKE		0x8000
+#define BRD_SM_CTRL_PCIE1_WAKE		0x8001
+#define BRD_SM_CTRL_BT_WAKE		0x8002
+#define BRD_SM_CTRL_PCIE2_WAKE		0x8003
+#define BRD_SM_CTRL_BUTTON		0x8004
+
+/ {
+	compatible = "fsl,imx95-15x15-evk", "fsl,imx95";
+	model = "NXP i.MX95 15X15 board";
+
+	aliases {
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &lpuart1;
+		serial4 = &lpuart5;
+	};
+
+	bt_sco_codec: bt-sco-codec {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		stdout-path = &lpuart1;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <64 128 192 255>;
+		pwms = <&tpm6 0 4000000 PWM_POLARITY_INVERTED>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vref_1v8";
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "audio-pwr";
+		gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_audio_switch1: regulator-audio-switch1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "audio-switch1";
+		gpio = <&pcal6524 0 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can2-stby";
+		gpio = <&pcal6524 14 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "M.2-power";
+		gpio = <&pcal6524 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_SD2_3V3";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "WLAN_EN";
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&pcal6524 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
+	};
+
+	reg_usb_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pcal6524 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vcc_12v: regulator-vcc-12v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "VCC_12V";
+		gpio = <&pcal6524 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7F000000>;
+			reusable;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+		};
+
+		vdev0vring0: vdev0vring0@88000000 {
+			reg = <0 0x88000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@88008000 {
+			reg = <0 0x88008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@88010000 {
+			reg = <0 0x88010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@88018000 {
+			reg = <0 0x88018000 0 0x8000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@88020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x88020000 0 0x100000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@88220000 {
+			reg = <0 0x88220000 0 0x1000>;
+			no-map;
+		};
+
+		vpu_boot: vpu_boot@a0000000 {
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,bitclock-master = <&btcpu>;
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,name = "bt-sco-audio";
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+
+		btcpu: simple-audio-card,cpu {
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+			sound-dai = <&sai1>;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			format = "i2s";
+			link-name = "micfil hifi";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		audio-codec = <&wm8962>;
+		audio-cpu = <&sai3>;
+		audio-routing = "Headphone Jack", "HPOUTL", "Headphone Jack", "HPOUTR",
+				"Ext Spk", "SPKOUTL", "Ext Spk", "SPKOUTR", "AMIC", "MICBIAS",
+				"IN3R", "AMIC", "IN1R", "AMIC";
+		hp-det-gpio = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		model = "wm8962-audio";
+		pinctrl-0 = <&pinctrl_hp>;
+		pinctrl-names = "default";
+	};
+
+	sound-xcvr {
+		compatible = "fsl,imx-audio-card";
+		model = "imx-audio-xcvr";
+
+		pri-dai-link {
+			link-name = "XCVR PCM";
+
+			cpu {
+				sound-dai = <&xcvr>;
+			};
+		};
+	};
+
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-0 = <&pinctrl_usdhc3_pwrseq>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	};
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0 0x80000000>;
+		device_type = "memory";
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&enetc_port0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&enetc_port1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&i3c2 {
+	i2c-scl-hz = <400000>;
+	pinctrl-0 = <&pinctrl_i3c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pca9570: gpio@24 {
+		compatible = "nxp,pca9570";
+		reg = <0x24 0 (I2C_FILTER)>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "OUT1", "OUT2", "OUT3", "OUT4";
+	};
+};
+
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	wm8962: codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&scmi_clk IMX95_CLK_SAI3>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		gpio-cfg = <
+			0x0000
+			0x0000
+			0x0000
+			0x0000
+			0x0000
+			0x0000
+		>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+	};
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_ptn5110>;
+		pinctrl-names = "default";
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <15000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_con_hs: endpoint {
+						remote-endpoint = <&usb3_data_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	pca9632: led-controller@62 {
+		compatible = "nxp,pca9632";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		nxp,inverted-out;
+
+		led_backlight0: led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_BACKLIGHT;
+			function-enumerator = <0>;
+		};
+
+		led_backlight1: led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_BACKLIGHT;
+			function-enumerator = <1>;
+		};
+	};
+};
+
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpi2c6 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_lpi2c6>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpuart5 {
+	pinctrl-0 = <&pinctrl_uart5>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&micfil {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_PDM>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>, <393216000>, <361267200>, <49152000>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_pdm>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mu7 {
+	status = "okay";
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_bus0 {
+	msi-map = <0x00 &its 0x60 0x1>,	//ENETC0 PF
+		  <0x10 &its 0x61 0x1>, //ENETC0 VF0
+		  <0x20 &its 0x62 0x1>, //ENETC0 VF1
+		  <0x40 &its 0x63 0x1>, //ENETC1 PF
+		  <0x50 &its 0x65 0x1>, //ENETC1 VF0
+		  <0x60 &its 0x66 0x1>, //ENETC1 VF1
+		  <0x80 &its 0x64 0x1>, //ENETC2 PF
+		  <0xc0 &its 0x67 0x1>;
+	iommu-map = <0x0 &smmu 0x20 0x1>,
+		    <0x10 &smmu 0x21 0x1>,
+		    <0x20 &smmu 0x22 0x1>,
+		    <0x40 &smmu 0x23 0x1>,
+		    <0x50 &smmu 0x25 0x1>,
+		    <0x60 &smmu 0x26 0x1>,
+		    <0x80 &smmu 0x24 0x1>,
+		    <0xc0 &smmu 0x27 0x1>;
+};
+
+&netc_emdio {
+	pinctrl-0 = <&pinctrl_emdio>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&pcal6524 4 GPIO_ACTIVE_LOW>;
+		realtek,clkout-disable;
+	};
+
+	ethphy1: ethernet-phy@2 {
+		reg = <2>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&pcal6524 5 GPIO_ACTIVE_LOW>;
+		realtek,clkout-disable;
+	};
+};
+
+&netc_timer {
+	status = "okay";
+};
+
+&netcmix_blk_ctrl {
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_m2_pwr>;
+	status = "okay";
+};
+
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_m2_pwr>;
+	status = "disabled";
+};
+
+&sai1 {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI1>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>, <393216000>, <361267200>, <12288000>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_sai1>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>, <393216000>, <361267200>, <12288000>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_sai3>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl_emdio: emdiogrp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC		0x50e
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO		0x90e
+		>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x50e
+			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x50e
+			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x50e
+			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x50e
+			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK	0x58e
+			IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e
+			IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e
+			IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e
+			IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e
+		>;
+	};
+
+	pinctrl_enetc1: enetc1grp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x50e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x50e
+			IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x50e
+			IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x50e
+			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK	0x58e
+			IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x57e
+			IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x57e
+			IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x57e
+			IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x57e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO25__CAN2_TX				0x39e
+			IMX95_PAD_GPIO_IO27__CAN2_RX				0x39e
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO21__GPIO2_IO_BIT21			0x31e
+		>;
+	};
+
+	pinctrl_i3c2: i3c2grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_MDC__I3C2_SCL				0x40000186
+			IMX95_PAD_ENET1_MDIO__I3C2_SDA				0x40000186
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL		0x40000b9e
+			IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL		0x40000b9e
+			IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO28__LPI2C3_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO29__LPI2C3_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO30__LPI2C4_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO31__LPI2C4_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c6: lpi2c6grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO02__LPI2C6_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO03__LPI2C6_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_mipi_dsi_csi: mipidsigrp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_DATA6__GPIO5_IO_BIT6			0x31e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14			0x31e
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B		0x40000b1e
+			IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13			0x31e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK				0x31e
+			IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0	0x31e
+		>;
+	};
+
+	pinctrl_ptn5110: ptn5110grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7			0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0	0x31e
+			IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK		0x31e
+			IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC		0x31e
+			IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0	0x31e
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK		0x31e
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC		0x31e
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0	0x31e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1	0x31e
+			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK		0x31e
+			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC	0x31e
+			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0	0x31e
+			IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1	0x31e
+			IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2	0x31e
+			IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3	0x31e
+			IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK		0x31e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO17__SAI3_MCLK				0x31e
+			IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK			0x31e
+			IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC			0x31e
+			IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0			0x31e
+			IMX95_PAD_GPIO_IO19__SAI3_TX_DATA_BIT0			0x31e
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO22__SPDIF_IN				0x3fe
+			IMX95_PAD_GPIO_IO23__SPDIF_OUT				0x3fe
+		>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+		fsl,pins = <
+			IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27			0x51e
+		>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO08__TPM6_CH0				0x51e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX		0x31e
+			IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX			0x31e
+			IMX95_PAD_DAP_TDI__LPUART5_RX				0x31e
+			IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B			0x31e
+			IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B			0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x15fe
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x13fe
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x13fe
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x13fe
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x13fe
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x13fe
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x13fe
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x13fe
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x13fe
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x13fe
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x15fe
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x158e
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x138e
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x138e
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x138e
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x138e
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x138e
+		>;
+	};
+
+	pinctrl_usdhc3_pwrseq: usdhc3pwrseqgrp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SCLK__GPIO5_IO_BIT9			0x31e
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x158e
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x138e
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x138e
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x138e
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x138e
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x138e
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x15fe
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x13fe
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x13fe
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x13fe
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x13fe
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x13fe
+		>;
+	};
+};
+
+&scmi_misc {
+	nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE		1>,
+		       <BRD_SM_CTRL_PCIE1_WAKE		1>,
+		       <BRD_SM_CTRL_BT_WAKE		1>,
+		       <BRD_SM_CTRL_PCIE2_WAKE		1>,
+		       <BRD_SM_CTRL_BUTTON		1>;
+};
+
+&thermal_zones {
+	a55-thermal {
+		cooling-maps {
+			map1 {
+				cooling-device = <&fan0 0 1>;
+				trip = <&atrip2>;
+			};
+
+			map2 {
+				cooling-device = <&fan0 1 2>;
+				trip = <&atrip3>;
+			};
+
+			map3 {
+				cooling-device = <&fan0 2 3>;
+				trip = <&atrip4>;
+			};
+		};
+
+		trips {
+			atrip2: trip2 {
+				hysteresis = <2000>;
+				temperature = <55000>;
+				type = "active";
+			};
+
+			atrip3: trip3 {
+				hysteresis = <2000>;
+				temperature = <65000>;
+				type = "active";
+			};
+
+			atrip4: trip4 {
+				hysteresis = <2000>;
+				temperature = <75000>;
+				type = "active";
+			};
+		};
+	};
+
+	pf09-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 2>;
+
+		trips {
+			pf09_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf09_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53arm-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 4>;
+
+		cooling-maps {
+			map0 {
+				cooling-device = <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				trip = <&pf5301_alert>;
+			};
+		};
+
+		trips {
+			pf5301_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5301_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53soc-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 3>;
+
+		trips {
+			pf5302_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5302_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
+&tpm3 {
+	pinctrl-0 = <&pinctrl_tpm3>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tpm6 {
+	pinctrl-0 = <&pinctrl_tpm6>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	role-switch-default-mode = "peripheral";
+	srp-disable;
+	usb-role-switch;
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	status = "okay";
+
+	port {
+		usb3_data_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usb3_phy {
+	orientation-switch;
+	fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>;
+	fsl,phy-pcs-tx-swing-full-percent = <100>;
+	fsl,phy-tx-preemp-amp-tune-microamp = <600>;
+	fsl,phy-tx-vboost-level-microvolt = <1156>;
+	fsl,phy-tx-vref-tune-percent = <100>;
+	status = "okay";
+
+	port {
+		usb3_data_ss: endpoint {
+			remote-endpoint = <&typec_con_ss>;
+		};
+	};
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	fsl,tuning-step = <1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	fsl,tuning-step = <1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog3 {
+	status = "okay";
+};
+
+&xcvr {
+	clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+		 <&scmi_clk IMX95_CLK_SPDIF>,
+		 <&dummy>,
+		 <&scmi_clk IMX95_CLK_AUDIOXCVR>,
+		 <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+		 <&scmi_clk IMX95_CLK_AUDIOPLL2>;
+	clock-names = "ipg", "phy", "spba", "pll_ipg", "pll8k", "pll11k";
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SPDIF>,
+			  <&scmi_clk IMX95_CLK_AUDIOXCVR>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+				 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+	assigned-clock-rates = <3932160000>, <3612672000>,
+			       <393216000>, <361267200>,
+			       <12288000>, <0>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_spdif>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts
new file mode 100644
index 000000000000..808a9fe3ebb2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx95-19x19-evk.dts"
+
+/ {
+	sof_cpu: cm7-cpu@80000000 {
+		compatible = "fsl,imx95-cm7-sof";
+		reg = <0x0 0x80000000 0x0 0x6100000>;
+		reg-names = "sram";
+		memory-region = <&adma_res>;
+		memory-region-names = "dma";
+		mboxes = <&mu7 2 0>, <&mu7 2 1>, <&mu7 3 0>, <&mu7 3 1>;
+		mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
+
+		sai3_cpu: port {
+			sai3_cpu_ep: endpoint {
+				remote-endpoint = <&wm8962_ep>;
+			};
+		};
+	};
+
+	reserved-memory {
+		adma_res: memory@86100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x86100000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	sof-sound {
+		compatible = "audio-graph-card2";
+		links = <&sai3_cpu>;
+		label = "audio";
+		hp-det-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		widgets = "Headphone", "Headphones",
+			  "Microphone", "Headset Mic";
+		routing = "Headphones", "HPOUTL",
+			  "Headphones", "HPOUTR",
+			  "Headset Mic", "MICBIAS",
+			  "IN3R", "Headset Mic",
+			  "IN1R", "Headset Mic";
+	};
+
+	sound-wm8962 {
+		status = "disabled";
+	};
+
+};
+
+&edma2 {
+	/* channels 30 and 31 reserved for FW usage */
+	dma-channel-mask = <0xc0000000>, <0x0>;
+};
+
+&sai3 {
+	status = "disabled";
+};
+
+&wm8962 {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>,
+			       <393216000>, <361267200>,
+			       <12288000>;
+
+	port {
+		wm8962_ep: endpoint {
+			bitclock-master;
+			frame-master;
+			remote-endpoint = <&sai3_cpu_ep>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
new file mode 100644
index 000000000000..9f968feccef6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -0,0 +1,1141 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95.dtsi"
+
+#define FALLING_EDGE			1
+#define RISING_EDGE			2
+
+#define BRD_SM_CTRL_SD3_WAKE		0x8000	/* PCAL6408A-0 */
+#define BRD_SM_CTRL_PCIE1_WAKE		0x8001	/* PCAL6408A-4 */
+#define BRD_SM_CTRL_BT_WAKE		0x8002	/* PCAL6408A-5 */
+#define BRD_SM_CTRL_PCIE2_WAKE		0x8003	/* PCAL6408A-6 */
+#define BRD_SM_CTRL_BUTTON		0x8004	/* PCAL6408A-7 */
+
+/ {
+	model = "NXP i.MX95 19X19 board";
+	compatible = "fsl,imx95-19x19-evk", "fsl,imx95";
+
+	aliases {
+		ethernet0 = &enetc_port0;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial4 = &lpuart5;
+	};
+
+	bt_sco_codec: audio-codec-bt-sco {
+		#sound-dai-cells = <1>;
+		compatible = "linux,bt-sco";
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		pwms = <&tpm6 2 4000000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <64 128 192 255>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7f000000>;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	flexcan1_phy: can-phy0 {
+		compatible = "nxp,tjr1443";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&i2c6_pcal6416 6 GPIO_ACTIVE_HIGH>;
+		standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_LOW>;
+	};
+
+	flexcan2_phy: can-phy1 {
+		compatible = "nxp,tjr1443";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&i2c4_gpio_expander_21 4 GPIO_ACTIVE_HIGH>;
+		standby-gpios = <&i2c4_gpio_expander_21 3 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_vref_1v8: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&i2c4_gpio_expander_21 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_audio_slot: regulator-audio-slot {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-wm8962";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&i2c4_gpio_expander_21 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		status = "disabled";
+	};
+
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&i2c7_pcal6524 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * M.2 device only can be enabled(W_DISABLE1#) after all Power
+		 * Rails reach their minimum operating voltage (PCI Express M.2
+		 * Specification r5.1 3.1.4 Power-up Timing).
+		 * Set a delay equal to the max value of Tsettle here.
+		 */
+		startup-delay-us = <5000>;
+	};
+
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE_WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&i2c7_pcal6524 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_slot_pwr: regulator-slot-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIe slot-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&i2c7_pcal6524 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VDD_SD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_usb_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&i2c7_pcal6524 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		model = "wm8962-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8962>;
+		hp-det-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HPOUTL",
+				"Headphone Jack", "HPOUTR",
+				"Ext Spk", "SPKOUTL",
+				"Ext Spk", "SPKOUTR",
+				"AMIC", "MICBIAS",
+				"IN3R", "AMIC",
+				"IN1R", "AMIC";
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&enetc_port0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	phys = <&flexcan1_phy>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	phys = <&flexcan2_phy>;
+	status = "okay";
+};
+
+&flexspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexspi1_reset>;
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <200000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	adp5585: io-expander@34 {
+		compatible = "adi,adp5585-00", "adi,adp5585";
+		reg = <0x34>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-reserved-ranges = <5 1>;
+		#pwm-cells = <3>;
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	i2c3_gpio_expander_20: gpio@20 {
+		compatible = "nxp,pcal6408";
+		#gpio-cells = <2>;
+		gpio-controller;
+		reg = <0x20>;
+		vcc-supply = <&reg_3p3v>;
+	};
+
+	pca9632: pca9632@62 {
+		compatible = "nxp,pca9632";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led_baclklight: led@0 {
+			reg = <0>;
+			label = "backlight";
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&scmi_clk IMX95_CLK_SAI3>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+		gpio-cfg = < 0x0000 /* 0:Default */
+			     0x0000 /* 1:Default */
+			     0x0000 /* 2:FN_DMICCLK */
+			     0x0000 /* 3:Default */
+			     0x0000 /* 4:FN_DMICCDAT */
+			     0x0000 /* 5:Default */
+			   >;
+	};
+
+	i2c4_gpio_expander_21: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_pcal6408>;
+		vcc-supply = <&reg_3p3v>;
+	};
+};
+
+&lpi2c5 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	status = "okay";
+
+	i2c5_pcal6408: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+	};
+};
+
+&lpi2c6 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c6>;
+	status = "okay";
+
+	i2c6_pcal6416: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6416>;
+		vcc-supply = <&reg_3p3v>;
+	};
+};
+
+&lpi2c7 {
+	clock-frequency = <1000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c7>;
+	status = "okay";
+
+	i2c7_pcal6524: i2c7-gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_pcal6524>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 0, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <0>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_con_hs: endpoint {
+						remote-endpoint = <&usb3_data_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&lpuart1 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "disabled";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&lpspi7 {
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi7>;
+	cs-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&micfil {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_PDM>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <49152000>;
+	status = "okay";
+};
+
+&mu7 {
+	status = "okay";
+};
+
+&netcmix_blk_ctrl {
+	status = "okay";
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_emdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_emdio>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&i2c5_pcal6408 2 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		realtek,clkout-disable;
+	};
+};
+
+&netc_timer {
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	reset-gpio = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_pcie0>;
+	status = "disabled";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_slot_pwr>;
+	status = "okay";
+};
+
+&pcie1_ep {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_slot_pwr>;
+	status = "disabled";
+};
+
+&sai1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI1>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&tpm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm3>;
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	status = "okay";
+
+	port {
+		usb3_data_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usb3_phy {
+	fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>;
+	fsl,phy-pcs-tx-swing-full-percent = <100>;
+	fsl,phy-tx-preemp-amp-tune-microamp = <600>;
+	fsl,phy-tx-vboost-level-microvolt = <1156>;
+	fsl,phy-tx-vref-tune-percent = <100>;
+	orientation-switch;
+	status = "okay";
+
+	port {
+		usb3_data_ss: endpoint {
+			remote-endpoint = <&typec_con_ss>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&scmi_misc {
+	nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_PCIE1_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_BT_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_PCIE2_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_BUTTON	FALLING_EDGE>;
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl_emdio: emdiogrp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC		0x50e
+			IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO		0x90e
+		>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x50e
+			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x50e
+			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x50e
+			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x50e
+			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK	0x58e
+			IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e
+			IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e
+			IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e
+			IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX			0x39e
+			IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX		0x39e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO25__CAN2_TX				0x39e
+			IMX95_PAD_GPIO_IO27__CAN2_RX				0x39e
+		>;
+	};
+
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B			0x3fe
+			IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK			0x3fe
+			IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS			0x3fe
+			IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0		0x3fe
+			IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1		0x3fe
+			IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2		0x3fe
+			IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3		0x3fe
+			IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4		0x3fe
+			IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5		0x3fe
+			IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6		0x3fe
+			IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7		0x3fe
+		>;
+	};
+
+	pinctrl_flexspi1_reset: flexspi1-reset-grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11			0x3fe
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11		0x31e
+		>;
+	};
+
+	pinctrl_i2c4_pcal6408: i2c4pcal6498grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18			0x31e
+		>;
+	};
+
+	pinctrl_i2c7_pcal6524: i2c7pcal6524grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16			0x31e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL		0x40000b9e
+			IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL		0x40000b9e
+			IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO00__LPI2C3_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO01__LPI2C3_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO30__LPI2C4_SDA			0x40000b9e
+			IMX95_PAD_GPIO_IO31__LPI2C4_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO22__LPI2C5_SDA			0x40000b9e
+			IMX95_PAD_GPIO_IO23__LPI2C5_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c6: lpi2c6grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO02__LPI2C6_SDA			0x40000b9e
+			IMX95_PAD_GPIO_IO03__LPI2C6_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c7: lpi2c7grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO08__LPI2C7_SDA			0x40000b9e
+			IMX95_PAD_GPIO_IO09__LPI2C7_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpspi7: lpspi7grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO04__GPIO2_IO_BIT4		0x3fe
+			IMX95_PAD_GPIO_IO05__LPSPI7_SIN			0x3fe
+			IMX95_PAD_GPIO_IO06__LPSPI7_SOUT		0x3fe
+			IMX95_PAD_GPIO_IO07__LPSPI7_SCK			0x3fe
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B		0x4000031e
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B		0x4000031e
+		>;
+	};
+
+	pinctrl_pcal6416: pcal6416grp {
+		fsl,pins = <
+			IMX95_PAD_CCM_CLKO3__GPIO4_IO_BIT28			0x31e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK				0x31e
+			IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0	0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0    0x31e
+			IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK      0x31e
+			IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC     0x31e
+			IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0    0x31e
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK			0x31e
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC			0x31e
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0		0x31e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1		0x31e
+			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK			0x31e
+			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC		0x31e
+			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0		0x31e
+			IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1		0x31e
+			IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2		0x31e
+			IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3		0x31e
+			IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK			0x31e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO17__SAI3_MCLK				0x31e
+			IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK			0x31e
+			IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC			0x31e
+			IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0			0x31e
+			IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0			0x31e
+		>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO12__TPM3_CH2			0x51e
+		>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO19__TPM6_CH2			0x51e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX      0x31e
+			IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX      0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX		0x31e
+			IMX95_PAD_DAP_TDI__LPUART5_RX			0x31e
+			IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B		0x31e
+			IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B		0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x15fe
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x13fe
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x13fe
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x13fe
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x13fe
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x13fe
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x13fe
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x13fe
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x13fe
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x13fe
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x15fe
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7		0x31e
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+};
+
+&thermal_zones {
+	a55-thermal {
+		trips {
+			atrip2: trip2 {
+				temperature = <55000>;
+				hysteresis = <2000>;
+				type = "active";
+			};
+
+			atrip3: trip3 {
+				temperature = <65000>;
+				hysteresis = <2000>;
+				type = "active";
+			};
+
+			atrip4: trip4 {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map1 {
+				trip = <&atrip2>;
+				cooling-device = <&fan0 0 1>;
+			};
+
+			map2 {
+				trip = <&atrip3>;
+				cooling-device = <&fan0 1 2>;
+			};
+
+			map3 {
+				trip = <&atrip4>;
+				cooling-device = <&fan0 2 3>;
+			};
+		};
+	};
+
+	pf09-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 2>;
+
+		trips {
+			pf09_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf09_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53arm-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 4>;
+
+		cooling-maps {
+			map0 {
+				trip = <&pf5301_alert>;
+				cooling-device =
+					<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+
+		trips {
+			pf5301_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5301_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53soc-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 3>;
+
+		trips {
+			pf5302_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5302_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
+&tpm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm6>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-clock.h b/arch/arm64/boot/dts/freescale/imx95-clock.h
new file mode 100644
index 000000000000..e1f91203e794
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-clock.h
@@ -0,0 +1,187 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __CLOCK_IMX95_H
+#define __CLOCK_IMX95_H
+
+/* The index should match i.MX95 SCMI Firmware */
+#define IMX95_CLK_32K                       1
+#define IMX95_CLK_24M                       2
+#define IMX95_CLK_FRO                       3
+#define IMX95_CLK_SYSPLL1_VCO               4
+#define IMX95_CLK_SYSPLL1_PFD0_UNGATED      5
+#define IMX95_CLK_SYSPLL1_PFD0              6
+#define IMX95_CLK_SYSPLL1_PFD0_DIV2         7
+#define IMX95_CLK_SYSPLL1_PFD1_UNGATED      8
+#define IMX95_CLK_SYSPLL1_PFD1              9
+#define IMX95_CLK_SYSPLL1_PFD1_DIV2         10
+#define IMX95_CLK_SYSPLL1_PFD2_UNGATED      11
+#define IMX95_CLK_SYSPLL1_PFD2              12
+#define IMX95_CLK_SYSPLL1_PFD2_DIV2         13
+#define IMX95_CLK_AUDIOPLL1_VCO             14
+#define IMX95_CLK_AUDIOPLL1                 15
+#define IMX95_CLK_AUDIOPLL2_VCO             16
+#define IMX95_CLK_AUDIOPLL2                 17
+#define IMX95_CLK_VIDEOPLL1_VCO             18
+#define IMX95_CLK_VIDEOPLL1                 19
+#define IMX95_CLK_RESERVED20                20
+#define IMX95_CLK_RESERVED21                21
+#define IMX95_CLK_RESERVED22                22
+#define IMX95_CLK_RESERVED23                23
+#define IMX95_CLK_ARMPLL_VCO                24
+#define IMX95_CLK_ARMPLL_PFD0_UNGATED       25
+#define IMX95_CLK_ARMPLL_PFD0               26
+#define IMX95_CLK_ARMPLL_PFD1_UNGATED       27
+#define IMX95_CLK_ARMPLL_PFD1               28
+#define IMX95_CLK_ARMPLL_PFD2_UNGATED       29
+#define IMX95_CLK_ARMPLL_PFD2               30
+#define IMX95_CLK_ARMPLL_PFD3_UNGATED       31
+#define IMX95_CLK_ARMPLL_PFD3               32
+#define IMX95_CLK_DRAMPLL_VCO               33
+#define IMX95_CLK_DRAMPLL                   34
+#define IMX95_CLK_HSIOPLL_VCO               35
+#define IMX95_CLK_HSIOPLL                   36
+#define IMX95_CLK_LDBPLL_VCO                37
+#define IMX95_CLK_LDBPLL                    38
+#define IMX95_CLK_EXT1                      39
+#define IMX95_CLK_EXT2                      40
+
+#define IMX95_CCM_NUM_CLK_SRC               41
+
+#define IMX95_CLK_ADC                      (IMX95_CCM_NUM_CLK_SRC + 0)
+#define IMX95_CLK_TMU                      (IMX95_CCM_NUM_CLK_SRC + 1)
+#define IMX95_CLK_BUSAON                   (IMX95_CCM_NUM_CLK_SRC + 2)
+#define IMX95_CLK_CAN1                     (IMX95_CCM_NUM_CLK_SRC + 3)
+#define IMX95_CLK_I3C1                     (IMX95_CCM_NUM_CLK_SRC + 4)
+#define IMX95_CLK_I3C1SLOW                 (IMX95_CCM_NUM_CLK_SRC + 5)
+#define IMX95_CLK_LPI2C1                   (IMX95_CCM_NUM_CLK_SRC + 6)
+#define IMX95_CLK_LPI2C2                   (IMX95_CCM_NUM_CLK_SRC + 7)
+#define IMX95_CLK_LPSPI1                   (IMX95_CCM_NUM_CLK_SRC + 8)
+#define IMX95_CLK_LPSPI2                   (IMX95_CCM_NUM_CLK_SRC + 9)
+#define IMX95_CLK_LPTMR1                   (IMX95_CCM_NUM_CLK_SRC + 10)
+#define IMX95_CLK_LPUART1                  (IMX95_CCM_NUM_CLK_SRC + 11)
+#define IMX95_CLK_LPUART2                  (IMX95_CCM_NUM_CLK_SRC + 12)
+#define IMX95_CLK_M33                      (IMX95_CCM_NUM_CLK_SRC + 13)
+#define IMX95_CLK_M33SYSTICK               (IMX95_CCM_NUM_CLK_SRC + 14)
+#define IMX95_CLK_MQS1                     (IMX95_CCM_NUM_CLK_SRC + 15)
+#define IMX95_CLK_PDM                      (IMX95_CCM_NUM_CLK_SRC + 16)
+#define IMX95_CLK_SAI1                     (IMX95_CCM_NUM_CLK_SRC + 17)
+#define IMX95_CLK_SENTINEL                 (IMX95_CCM_NUM_CLK_SRC + 18)
+#define IMX95_CLK_TPM2                     (IMX95_CCM_NUM_CLK_SRC + 19)
+#define IMX95_CLK_TSTMR1                   (IMX95_CCM_NUM_CLK_SRC + 20)
+#define IMX95_CLK_CAMAPB                   (IMX95_CCM_NUM_CLK_SRC + 21)
+#define IMX95_CLK_CAMAXI                   (IMX95_CCM_NUM_CLK_SRC + 22)
+#define IMX95_CLK_CAMCM0                   (IMX95_CCM_NUM_CLK_SRC + 23)
+#define IMX95_CLK_CAMISI                   (IMX95_CCM_NUM_CLK_SRC + 24)
+#define IMX95_CLK_MIPIPHYCFG               (IMX95_CCM_NUM_CLK_SRC + 25)
+#define IMX95_CLK_MIPIPHYPLLBYPASS         (IMX95_CCM_NUM_CLK_SRC + 26)
+#define IMX95_CLK_MIPIPHYPLLREF            (IMX95_CCM_NUM_CLK_SRC + 27)
+#define IMX95_CLK_MIPITESTBYTE             (IMX95_CCM_NUM_CLK_SRC + 28)
+#define IMX95_CLK_A55                      (IMX95_CCM_NUM_CLK_SRC + 29)
+#define IMX95_CLK_A55MTRBUS                (IMX95_CCM_NUM_CLK_SRC + 30)
+#define IMX95_CLK_A55PERIPH                (IMX95_CCM_NUM_CLK_SRC + 31)
+#define IMX95_CLK_DRAMALT                  (IMX95_CCM_NUM_CLK_SRC + 32)
+#define IMX95_CLK_DRAMAPB                  (IMX95_CCM_NUM_CLK_SRC + 33)
+#define IMX95_CLK_DISPAPB                  (IMX95_CCM_NUM_CLK_SRC + 34)
+#define IMX95_CLK_DISPAXI                  (IMX95_CCM_NUM_CLK_SRC + 35)
+#define IMX95_CLK_DISPDP                   (IMX95_CCM_NUM_CLK_SRC + 36)
+#define IMX95_CLK_DISPOCRAM                (IMX95_CCM_NUM_CLK_SRC + 37)
+#define IMX95_CLK_DISPUSB31                (IMX95_CCM_NUM_CLK_SRC + 38)
+#define IMX95_CLK_DISP1PIX                 (IMX95_CCM_NUM_CLK_SRC + 39)
+#define IMX95_CLK_DISP2PIX                 (IMX95_CCM_NUM_CLK_SRC + 40)
+#define IMX95_CLK_DISP3PIX                 (IMX95_CCM_NUM_CLK_SRC + 41)
+#define IMX95_CLK_GPUAPB                   (IMX95_CCM_NUM_CLK_SRC + 42)
+#define IMX95_CLK_GPU                      (IMX95_CCM_NUM_CLK_SRC + 43)
+#define IMX95_CLK_HSIOACSCAN480M           (IMX95_CCM_NUM_CLK_SRC + 44)
+#define IMX95_CLK_HSIOACSCAN80M            (IMX95_CCM_NUM_CLK_SRC + 45)
+#define IMX95_CLK_HSIO                     (IMX95_CCM_NUM_CLK_SRC + 46)
+#define IMX95_CLK_HSIOPCIEAUX              (IMX95_CCM_NUM_CLK_SRC + 47)
+#define IMX95_CLK_HSIOPCIETEST160M         (IMX95_CCM_NUM_CLK_SRC + 48)
+#define IMX95_CLK_HSIOPCIETEST400M         (IMX95_CCM_NUM_CLK_SRC + 49)
+#define IMX95_CLK_HSIOPCIETEST500M         (IMX95_CCM_NUM_CLK_SRC + 50)
+#define IMX95_CLK_HSIOUSBTEST50M           (IMX95_CCM_NUM_CLK_SRC + 51)
+#define IMX95_CLK_HSIOUSBTEST60M           (IMX95_CCM_NUM_CLK_SRC + 52)
+#define IMX95_CLK_BUSM7                    (IMX95_CCM_NUM_CLK_SRC + 53)
+#define IMX95_CLK_M7                       (IMX95_CCM_NUM_CLK_SRC + 54)
+#define IMX95_CLK_M7SYSTICK                (IMX95_CCM_NUM_CLK_SRC + 55)
+#define IMX95_CLK_BUSNETCMIX               (IMX95_CCM_NUM_CLK_SRC + 56)
+#define IMX95_CLK_ENET                     (IMX95_CCM_NUM_CLK_SRC + 57)
+#define IMX95_CLK_ENETPHYTEST200M          (IMX95_CCM_NUM_CLK_SRC + 58)
+#define IMX95_CLK_ENETPHYTEST500M          (IMX95_CCM_NUM_CLK_SRC + 59)
+#define IMX95_CLK_ENETPHYTEST667M          (IMX95_CCM_NUM_CLK_SRC + 60)
+#define IMX95_CLK_ENETREF                  (IMX95_CCM_NUM_CLK_SRC + 61)
+#define IMX95_CLK_ENETTIMER1               (IMX95_CCM_NUM_CLK_SRC + 62)
+#define IMX95_CLK_MQS2                     (IMX95_CCM_NUM_CLK_SRC + 63)
+#define IMX95_CLK_SAI2                     (IMX95_CCM_NUM_CLK_SRC + 64)
+#define IMX95_CLK_NOCAPB                   (IMX95_CCM_NUM_CLK_SRC + 65)
+#define IMX95_CLK_NOC                      (IMX95_CCM_NUM_CLK_SRC + 66)
+#define IMX95_CLK_NPUAPB                   (IMX95_CCM_NUM_CLK_SRC + 67)
+#define IMX95_CLK_NPU                      (IMX95_CCM_NUM_CLK_SRC + 68)
+#define IMX95_CLK_CCMCKO1                  (IMX95_CCM_NUM_CLK_SRC + 69)
+#define IMX95_CLK_CCMCKO2                  (IMX95_CCM_NUM_CLK_SRC + 70)
+#define IMX95_CLK_CCMCKO3                  (IMX95_CCM_NUM_CLK_SRC + 71)
+#define IMX95_CLK_CCMCKO4                  (IMX95_CCM_NUM_CLK_SRC + 72)
+#define IMX95_CLK_VPUAPB                   (IMX95_CCM_NUM_CLK_SRC + 73)
+#define IMX95_CLK_VPU                      (IMX95_CCM_NUM_CLK_SRC + 74)
+#define IMX95_CLK_VPUDSP                   (IMX95_CCM_NUM_CLK_SRC + 75)
+#define IMX95_CLK_VPUJPEG                  (IMX95_CCM_NUM_CLK_SRC + 76)
+#define IMX95_CLK_AUDIOXCVR                (IMX95_CCM_NUM_CLK_SRC + 77)
+#define IMX95_CLK_BUSWAKEUP                (IMX95_CCM_NUM_CLK_SRC + 78)
+#define IMX95_CLK_CAN2                     (IMX95_CCM_NUM_CLK_SRC + 79)
+#define IMX95_CLK_CAN3                     (IMX95_CCM_NUM_CLK_SRC + 80)
+#define IMX95_CLK_CAN4                     (IMX95_CCM_NUM_CLK_SRC + 81)
+#define IMX95_CLK_CAN5                     (IMX95_CCM_NUM_CLK_SRC + 82)
+#define IMX95_CLK_FLEXIO1                  (IMX95_CCM_NUM_CLK_SRC + 83)
+#define IMX95_CLK_FLEXIO2                  (IMX95_CCM_NUM_CLK_SRC + 84)
+#define IMX95_CLK_FLEXSPI1                 (IMX95_CCM_NUM_CLK_SRC + 85)
+#define IMX95_CLK_I3C2                     (IMX95_CCM_NUM_CLK_SRC + 86)
+#define IMX95_CLK_I3C2SLOW                 (IMX95_CCM_NUM_CLK_SRC + 87)
+#define IMX95_CLK_LPI2C3                   (IMX95_CCM_NUM_CLK_SRC + 88)
+#define IMX95_CLK_LPI2C4                   (IMX95_CCM_NUM_CLK_SRC + 89)
+#define IMX95_CLK_LPI2C5                   (IMX95_CCM_NUM_CLK_SRC + 90)
+#define IMX95_CLK_LPI2C6                   (IMX95_CCM_NUM_CLK_SRC + 91)
+#define IMX95_CLK_LPI2C7                   (IMX95_CCM_NUM_CLK_SRC + 92)
+#define IMX95_CLK_LPI2C8                   (IMX95_CCM_NUM_CLK_SRC + 93)
+#define IMX95_CLK_LPSPI3                   (IMX95_CCM_NUM_CLK_SRC + 94)
+#define IMX95_CLK_LPSPI4                   (IMX95_CCM_NUM_CLK_SRC + 95)
+#define IMX95_CLK_LPSPI5                   (IMX95_CCM_NUM_CLK_SRC + 96)
+#define IMX95_CLK_LPSPI6                   (IMX95_CCM_NUM_CLK_SRC + 97)
+#define IMX95_CLK_LPSPI7                   (IMX95_CCM_NUM_CLK_SRC + 98)
+#define IMX95_CLK_LPSPI8                   (IMX95_CCM_NUM_CLK_SRC + 99)
+#define IMX95_CLK_LPTMR2                   (IMX95_CCM_NUM_CLK_SRC + 100)
+#define IMX95_CLK_LPUART3                  (IMX95_CCM_NUM_CLK_SRC + 101)
+#define IMX95_CLK_LPUART4                  (IMX95_CCM_NUM_CLK_SRC + 102)
+#define IMX95_CLK_LPUART5                  (IMX95_CCM_NUM_CLK_SRC + 103)
+#define IMX95_CLK_LPUART6                  (IMX95_CCM_NUM_CLK_SRC + 104)
+#define IMX95_CLK_LPUART7                  (IMX95_CCM_NUM_CLK_SRC + 105)
+#define IMX95_CLK_LPUART8                  (IMX95_CCM_NUM_CLK_SRC + 106)
+#define IMX95_CLK_SAI3                     (IMX95_CCM_NUM_CLK_SRC + 107)
+#define IMX95_CLK_SAI4                     (IMX95_CCM_NUM_CLK_SRC + 108)
+#define IMX95_CLK_SAI5                     (IMX95_CCM_NUM_CLK_SRC + 109)
+#define IMX95_CLK_SPDIF                    (IMX95_CCM_NUM_CLK_SRC + 110)
+#define IMX95_CLK_SWOTRACE                 (IMX95_CCM_NUM_CLK_SRC + 111)
+#define IMX95_CLK_TPM4                     (IMX95_CCM_NUM_CLK_SRC + 112)
+#define IMX95_CLK_TPM5                     (IMX95_CCM_NUM_CLK_SRC + 113)
+#define IMX95_CLK_TPM6                     (IMX95_CCM_NUM_CLK_SRC + 114)
+#define IMX95_CLK_TSTMR2                   (IMX95_CCM_NUM_CLK_SRC + 115)
+#define IMX95_CLK_USBPHYBURUNIN            (IMX95_CCM_NUM_CLK_SRC + 116)
+#define IMX95_CLK_USDHC1                   (IMX95_CCM_NUM_CLK_SRC + 117)
+#define IMX95_CLK_USDHC2                   (IMX95_CCM_NUM_CLK_SRC + 118)
+#define IMX95_CLK_USDHC3                   (IMX95_CCM_NUM_CLK_SRC + 119)
+#define IMX95_CLK_V2XPK                    (IMX95_CCM_NUM_CLK_SRC + 120)
+#define IMX95_CLK_WAKEUPAXI                (IMX95_CCM_NUM_CLK_SRC + 121)
+#define IMX95_CLK_XSPISLVROOT              (IMX95_CCM_NUM_CLK_SRC + 122)
+#define IMX95_CLK_SEL_EXT                  (IMX95_CCM_NUM_CLK_SRC + 123 + 0)
+#define IMX95_CLK_SEL_A55C0                (IMX95_CCM_NUM_CLK_SRC + 123 + 1)
+#define IMX95_CLK_SEL_A55C1                (IMX95_CCM_NUM_CLK_SRC + 123 + 2)
+#define IMX95_CLK_SEL_A55C2                (IMX95_CCM_NUM_CLK_SRC + 123 + 3)
+#define IMX95_CLK_SEL_A55C3                (IMX95_CCM_NUM_CLK_SRC + 123 + 4)
+#define IMX95_CLK_SEL_A55C4                (IMX95_CCM_NUM_CLK_SRC + 123 + 5)
+#define IMX95_CLK_SEL_A55C5                (IMX95_CCM_NUM_CLK_SRC + 123 + 6)
+#define IMX95_CLK_SEL_A55P                 (IMX95_CCM_NUM_CLK_SRC + 123 + 7)
+#define IMX95_CLK_SEL_DRAM                 (IMX95_CCM_NUM_CLK_SRC + 123 + 8)
+#define IMX95_CLK_SEL_TEMPSENSE            (IMX95_CCM_NUM_CLK_SRC + 123 + 9)
+
+#endif	/* __CLOCK_IMX95_H */
diff --git a/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts b/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts
new file mode 100644
index 000000000000..26c2df9b1b60
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx95-phycore-fpsc.dtsi"
+
+/ {
+	compatible = "phytec,imx95-libra-rdk-fpsc",
+		"phytec,imx95-phycore-fpsc", "fsl,imx95";
+	model = "PHYTEC Libra i.MX95 RDK FPSC";
+
+	aliases {
+		can1 = &flexcan2;
+		can2 = &flexcan1;
+		ethernet0 = &enetc_port0;
+		serial0 = &lpuart7;
+		serial1 = &lpuart8;
+	};
+
+	chosen {
+		stdout-path = &lpuart7;
+	};
+
+	backlight_lvds0: backlight0 {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_lvds0>;
+		power-supply = <&reg_vdd_12v0>;
+		status = "disabled";
+	};
+
+	transceiver1: can-phy {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&gpio_expander 10 GPIO_ACTIVE_LOW>;
+	};
+
+	transceiver2: can-phy {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&gpio_expander 9 GPIO_ACTIVE_LOW>;
+	};
+
+	panel0_lvds: panel-lvds0 {
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_vdd_3v3>;
+		status = "disabled";
+	};
+
+	reg_vdd_12v0: regulator-vdd-12v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "VDD_12V0";
+	};
+
+	reg_vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3";
+	};
+
+	reg_vdd_5v0: regulator-vdd-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VDD_5V0";
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&enetc_port2 {
+	managed = "in-band-status";
+	phy-handle = <&ethphy2>;
+	phy-mode = "10gbase-r";
+};
+
+/* CAN FD */
+&flexcan1 {
+	phys = <&transceiver1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	phys = <&transceiver2>;
+	status = "okay";
+};
+
+/* SPI-NOR */
+&flexspi1 {
+	pinctrl-0 = <&pinctrl_flexspi>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi_nor: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <166000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "RGMII2_nINT", "GPIO4", "RTC_INT", "",
+			  "LVDS1_BL_EN";
+};
+
+&lpi2c1 {
+	temperature-sensor@4f {
+		compatible = "nxp,p3t1755";
+		reg = <0x4f>;
+		vs-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&lpi2c3 {
+	status = "okay";
+
+	leds@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-1 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-2 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-3 {
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+&lpi2c4 {
+	status = "okay";
+
+	gpio_expander: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3",
+				  "CSI1_CTRL4", "CSI2_CTRL1", "CSI2_CTRL2",
+				  "CSI2_CTRL3", "CSI2_CTRL4", "CLK_EN_AV",
+				  "nCAN2_EN", "nCAN1_EN", "PCIE1_nWAKE",
+				  "PCIE2_nWAKE", "PCIE2_nALERT_3V3",
+				  "UART1_BT_RS_SEL", "UART1_RS232_485_SEL";
+		vcc-supply = <&reg_vdd_1v8>;
+
+		uart1_bt_rs_sel: bt-rs-hog {
+			gpios = <14 GPIO_ACTIVE_HIGH>;
+			gpio-hog;
+			line-name = "UART1_BT_RS_SEL";
+			output-low;
+		};
+	};
+};
+
+&lpi2c5 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+/* Used for M33 debug */
+&lpuart2 {
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	pinctrl-names = "default";
+};
+
+/* A-55 debug UART */
+&lpuart7 {
+	status = "okay";
+};
+
+/* RS232/RS485/BT */
+&lpuart8 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&netc_emdio { /* RGMII2 */
+	ethphy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		enet-phy-lane-no-swap;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+
+	ethphy2: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x8>;
+		max-speed = <10000>; /* 10Gbit/s */
+		status = "disabled";
+	};
+};
+
+&pcie0 {
+	reset-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&pcie1 {
+	reset-gpio = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&rv3028 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rtc>;
+	interrupt-parent = <&gpio2>;
+	interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+	aux-voltage-chargeable = <1>;
+	wakeup-source;
+	trickle-resistor-ohms = <3000>;
+};
+
+&scmi_iomuxc {
+	pinctrl_lpuart2: lpuart2grp { /* FPSC proprietary */
+		fsl,pins = <
+			IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX	0x31e
+			IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX	0x31e
+		>;
+	};
+
+	pinctrl_lvds0: lvds0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO20__GPIO2_IO_BIT20	0x31e
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18	0x31e
+		>;
+	};
+
+	pinctrl_tpm4: tpm4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO21__TPM4_CH1	0x51e
+		>;
+	};
+};
+
+&tpm4 {
+	pinctrl-0 = <&pinctrl_tpm4>;
+	pinctrl-names = "default";
+};
+
+&usb3 {
+	fsl,over-current-active-low;
+	fsl,power-active-low;
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb3_phy {
+	vbus-supply = <&reg_vdd_5v0>;
+	status = "okay";
+};
+
+/* uSD Card */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi b/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi
new file mode 100644
index 000000000000..7519d5bd06ba
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi
@@ -0,0 +1,656 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx95.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX95 FPSC";
+	compatible = "phytec,imx95-phycore-fpsc", "fsl,imx95";
+
+	aliases {
+		ethernet1 = &enetc_port1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c5;
+		i2c3 = &lpi2c3;
+		i2c4 = &lpi2c4;
+		i2c5 = &lpi2c1;
+		rtc0 = &rv3028;
+		rtc1 = &scmi_bbm;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000001 0x00000000>;
+	};
+
+	reg_nvcc_aon: regulator-nvcc-aon {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_IO";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDDSW_SD2";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7f000000>;
+			reusable;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&enetc_port0 { /* FPSC RGMII2 */
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	pinctrl-names = "default";
+};
+
+&enetc_port1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&flexcan1 { /* FPSC CAN1 */
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+};
+
+&flexcan2 { /* FPSC CAN2 */
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+&flexspi1 { /* FPSC QSPI */
+	pinctrl-0 = <&pinctrl_flexspi>;
+	pinctrl-names = "default";
+};
+
+&gpio1 { /* FPSC GPIO */
+	gpio-line-names = "", "", "", "", "GPIO2",
+			  "GPIO1", "", "", "", "",
+			  "PCIE1_nPERST", "USB1_PWR_EN", "GPIO3", "USB2_PWR_EN", "PCIE2_nPERST";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio2 { /* FPSC GPIO */
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "RGMII2_nINT", "GPIO4";
+	pinctrl-0 = <&pinctrl_gpio2>;
+	pinctrl-names = "default";
+};
+
+&gpio3 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "SD2_RESET_B";
+};
+
+&gpio4 {
+	gpio-line-names = "ENET2_nINT";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "USB1_OC", "USB2_OC";
+};
+
+&lpi2c1 { /* FPSC I2C5 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	dram_sense: temperature-sensor@48 {
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	emmc_sense: temperature-sensor@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	ethphy_sense: temperature-sensor@4a {
+		compatible = "ti,tmp102";
+		reg = <0x4a>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	pmic_sense: temperature-sensor@4b {
+		compatible = "ti,tmp102";
+		reg = <0x4b>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	/* User EEPROM */
+	eeprom@50 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_nvcc_aon>;
+	};
+
+	/* Factory EEPROM */
+	eeprom@51 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+		vcc-supply = <&reg_nvcc_aon>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+
+	/* User EEPROM ID page */
+	eeprom@58 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x58>;
+		pagesize = <32>;
+		vcc-supply = <&reg_nvcc_aon>;
+	};
+};
+
+&lpi2c2 { /* FPSC I2C1 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-names = "default";
+};
+
+&lpi2c3 { /* FPSC I2C3 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+};
+
+&lpi2c4 { /* FPSC I2C4 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-names = "default";
+};
+
+&lpi2c5 { /* FPSC I2C2 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-names = "default";
+};
+
+&lpspi3 { /* FPSC SPI2 */
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	pinctrl-names = "default";
+};
+
+&lpspi4 { /* FPSC SPI3 */
+	pinctrl-0 = <&pinctrl_lpspi4>;
+	pinctrl-names = "default";
+};
+
+&lpspi7 { /* FPSC SPI1 */
+	pinctrl-0 = <&pinctrl_lpspi7>;
+	pinctrl-names = "default";
+};
+
+&lpuart5 { /* FPSC UART2 */
+	pinctrl-0 = <&pinctrl_lpuart5>;
+	pinctrl-names = "default";
+};
+
+&lpuart7 { /* FPSC UART3 */
+	pinctrl-0 = <&pinctrl_lpuart7>;
+	pinctrl-names = "default";
+};
+
+&lpuart8 { /* FPSC UART1 */
+	pinctrl-0 = <&pinctrl_lpuart8>;
+	pinctrl-names = "default";
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_emdio { /* FPSC RGMII2 */
+	pinctrl-0 = <&pinctrl_emdio>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethphy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		enet-phy-lane-no-swap;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+&netcmix_blk_ctrl {
+	status = "okay";
+};
+
+&pcie0 { /* FPSC PCIE1 */
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+};
+
+&pcie1 { /* FPSC PCIE2 */
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+};
+
+&sai5 {	/* FPSC SAI1 */
+	pinctrl-0 = <&pinctrl_sai5>;
+	pintrc-names = "default";
+};
+
+&scmi_iomuxc {
+	pinctrl_emdio: emdiogrp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO	0x97e	/* RGMII2_MDIO */
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC	0x502	/* RGMII2_MDC */
+		>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO16__GPIO2_IO_BIT16			0x31e	/* RGMII2_nINT */
+			IMX95_PAD_CCM_CLKO3__NETCMIX_TOP_NETC_TMR_1588_TRIG2	0x31e	/* RGMII2_EVENT_IN */
+			IMX95_PAD_CCM_CLKO4__NETCMIX_TOP_NETC_TMR_1588_PP2	0x31e	/* RGMII2_EVENT_OUT */
+
+			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x57e	/* RGMII2_TX_3 */
+			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x57e	/* RGMII2_TX_2 */
+			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x57e	/* RGMII2_TX_1 */
+			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x57e	/* RGMII2_TX_0 */
+			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e	/* RGMII2_TX_CTL */
+			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e	/* RGMII2_TXC */
+			IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e	/* RGMII2_RX_3 */
+			IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e	/* RGMII2_RX_2 */
+			IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e	/* RGMII2_RX_1 */
+			IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e	/* RGMII2_RX_0 */
+			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e	/* RGMII2_RX_CTL */
+			IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK	0x58e	/* RGMII2_RXC */
+		>;
+	};
+
+	pinctrl_enetc1: enetc1grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_MDC__GPIO4_IO_BIT0			0x31e
+			IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x57e
+			IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x57e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x57e
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x57e
+			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x57e
+			IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x57e
+			IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x57e
+			IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x57e
+			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK	0x58e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX		0x51e	/* CAN1_TX */
+			IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX	0x51e	/* CAN1_RX */
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO25__CAN2_TX	0x51e	/* CAN2_TX */
+			IMX95_PAD_GPIO_IO27__CAN2_RX	0x51e	/* CAN2_RX */
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B		0x3fe	/* QSPI_CE */
+			IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK		0x3fe	/* QSPI_CLK */
+			IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0	0x3fe	/* QSPI_DATA_0 */
+			IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1	0x3fe	/* QSPI_DATA_1 */
+			IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2	0x3fe	/* QSPI_DATA_2 */
+			IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3	0x3fe	/* QSPI_DATA_3 */
+			IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS		0x3fe	/* QSPI_DQS */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			IMX95_PAD_UART1_TXD__AONMIX_TOP_GPIO1_IO_BIT5	0x31e	/* GPIO1 */
+			IMX95_PAD_UART1_RXD__AONMIX_TOP_GPIO1_IO_BIT4	0x31e	/* GPIO2 */
+			IMX95_PAD_SAI1_TXC__AONMIX_TOP_GPIO1_IO_BIT12	0x31e	/* GPIO3 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO17__GPIO2_IO_BIT17	0x31e	/* GPIO4 */
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL	0x40000b9e	/* I2C5_SCL */
+			IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA	0x40000b9e	/* I2C5_SDA */
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA	0x40000b9e	/* I2C1_SDA_DNU */
+			IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL	0x40000b9e	/* I2C1_SCL_DNU */
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e	/* I2C3_SDA */
+			IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e	/* I2C3_SCL */
+		>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e	/* I2C4_SDA */
+			IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e	/* I2C4_SDL */
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO22__LPI2C5_SDA	0x40000b9e	/* I2C2_SDA */
+			IMX95_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e	/* I2C2_SCL */
+		>;
+	};
+
+	pinctrl_lpspi3: lpspi3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO11__LPSPI3_SCK		0x51e	/* SPI2_SCLK */
+			IMX95_PAD_GPIO_IO10__LPSPI3_SOUT	0x51e	/* SPI2_MOSI */
+			IMX95_PAD_GPIO_IO09__LPSPI3_SIN		0x51e	/* SPI2_MISO */
+			IMX95_PAD_GPIO_IO08__LPSPI3_PCS0	0x51e	/* SPI2_CS */
+		>;
+	};
+
+	pinctrl_lpspi4: lpspi4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO21__LPSPI4_SCK		0x51e	/* SPI3_SCLK */
+			IMX95_PAD_GPIO_IO20__LPSPI4_SOUT	0x51e	/* SPI3_MOSI */
+			IMX95_PAD_GPIO_IO19__LPSPI4_SIN		0x51e	/* SPI3_MISO */
+			IMX95_PAD_GPIO_IO18__LPSPI4_PCS0	0x51e	/* SPI3_CS */
+		>;
+	};
+
+	pinctrl_lpspi7: lpspi7grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO07__LPSPI7_SCK		0x51e	/* SPI1_SCLK */
+			IMX95_PAD_GPIO_IO06__LPSPI7_SOUT	0x51e	/* SPI1_MOSI */
+			IMX95_PAD_GPIO_IO05__LPSPI7_SIN		0x51e	/* SPI1_MISO */
+			IMX95_PAD_GPIO_IO04__LPSPI7_PCS0	0x51e	/* SPI1_CS */
+		>;
+	};
+
+	pinctrl_lpuart5: lpuart5grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO01__LPUART5_RX		0x51e	/* UART2_RXD */
+			IMX95_PAD_GPIO_IO00__LPUART5_TX		0x51e	/* UART2_TXD */
+			IMX95_PAD_GPIO_IO03__LPUART5_RTS_B	0x51e	/* UART2_RTS */
+			IMX95_PAD_GPIO_IO02__LPUART5_CTS_B	0x51e	/* UART2_CTS */
+		>;
+	};
+
+	pinctrl_lpuart7: lpuart7grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO37__LPUART7_RX	0x31e	/* UART3_RXD */
+			IMX95_PAD_GPIO_IO36__LPUART7_TX	0x31e	/* UART3_TXD */
+		>;
+	};
+
+	pinctrl_lpuart8: lpuart8grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO13__LPUART8_RX		0x51e	/* UART1_RXD */
+			IMX95_PAD_GPIO_IO12__LPUART8_TX		0x51e	/* UART1_TXD */
+			IMX95_PAD_GPIO_IO15__LPUART8_RTS_B	0x51e	/* UART1_RTS */
+			IMX95_PAD_GPIO_IO14__LPUART8_CTS_B	0x51e	/* UART1_CTS */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B		0x31e	/* PCIE1_nCLKREQ */
+			IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10	0x31e	/* PCIE1_nPERST */
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B	0x31e	/* PCIE2_nCLKREQ */
+			IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14	0x31e	/* PCIE2_nPERST */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7	0x31e
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_DQS__SAI5_RX_SYNC		0x51e	/* SAI1_RX_SYNC */
+			IMX95_PAD_XSPI1_SS1_B__SAI5_RX_BCLK		0x51e	/* SAI1_RX_BCLK */
+			IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0	0x51e	/* SAI1_RX_DATA */
+			IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC		0x51e	/* SAI1_TX_SYNC */
+			IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK		0x51e	/* SAI1_TX_BCLK */
+			IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0	0x51e	/* SAI1_TX_DATA */
+		>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+	      fsl,pins = <
+		      IMX95_PAD_GPIO_IO24__TPM3_CH3	0x51e	/* PWM1 */
+	      >;
+	};
+
+	pinctrl_tpm5: tpm5grp {
+	      fsl,pins = <
+		      IMX95_PAD_GPIO_IO26__TPM5_CH3	0x51e	/* PWM2 */
+	      >;
+	};
+
+	pinctrl_usbc: usbcgrp {
+		fsl,pins = <
+			IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11	0x51e	/* USB1_PWR_EN */
+			IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13		0x51e	/* USB1_OC */
+		>;
+	};
+
+	pinctrl_usb2: usb2grp {
+		fsl,pins = <
+			IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13	0x51e	/* USB2_PWR_EN */
+			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14		0x51e	/* USB2_OC */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x13fe
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x13fe
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x13fe
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x13fe
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x13fe
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x13fe
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x13fe
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x13fe
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x13fe
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x15fe
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x15fe
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__USDHC2_CD_B		0x31e	/* CD */
+			IMX95_PAD_SD2_CLK__USDHC2_CLK		0x158e	/* CLK */
+			IMX95_PAD_SD2_CMD__USDHC2_CMD		0x138e	/* CMD */
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0	0x138e	/* DATA0 */
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1	0x138e	/* DATA1 */
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2	0x138e	/* DATA2 */
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3	0x138e	/* DATA3 */
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__USDHC2_CD_B		0x31e	/* CD */
+			IMX95_PAD_SD2_CLK__USDHC2_CLK		0x158e	/* CLK */
+			IMX95_PAD_SD2_CMD__USDHC2_CMD		0x138e	/* CMD */
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0	0x138e	/* DATA0 */
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1	0x138e	/* DATA1 */
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2	0x138e	/* DATA2 */
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3	0x138e	/* DATA3 */
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__USDHC2_CD_B		0x31e	/* CD */
+			IMX95_PAD_SD2_CLK__USDHC2_CLK		0x15fe	/* CLK */
+			IMX95_PAD_SD2_CMD__USDHC2_CMD		0x13fe	/* CMD */
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe	/* DATA0 */
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe	/* DATA1 */
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe	/* DATA2 */
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe	/* DATA3 */
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK		0x158e	/* SDIO_CLK */
+			IMX95_PAD_SD3_CMD__USDHC3_CMD		0x138e	/* SDIO_CMD */
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0	0x138e	/* SDIO_DATA0 */
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1	0x138e	/* SDIO_DATA1 */
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2	0x138e	/* SDIO_DATA2 */
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3	0x138e	/* SDIO_DATA3 */
+		>;
+	};
+};
+
+&tpm3 { /* FPSC PWM1 */
+	pinctrl-0 = <&pinctrl_tpm3>;
+	pinctrl-names = "default";
+};
+
+&tpm5 {	/* FPSC PWM2 */
+	pinctrl-0 = <&pinctrl_tpm5>;
+	pinctrl-names = "default";
+};
+
+&usb3 { /* FPSC USB1 */
+	pinctrl-0 = <&pinctrl_usbc>;
+	pinctrl-names = "default";
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	status = "okay";
+};
+
+&usdhc2 { /* FPSC SDCARD */
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	sd-uhs-sdr104;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+};
+
+&usdhc3 { /* FPSC SDIO */
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-pinfunc.h b/arch/arm64/boot/dts/freescale/imx95-pinfunc.h
new file mode 100644
index 000000000000..9f614eea7c86
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-pinfunc.h
@@ -0,0 +1,865 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __DTS_IMX95_PINFUNC_H
+#define __DTS_IMX95_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define IMX95_PAD_DAP_TDI__JTAG_MUX_TDI                               0x0000 0x0204 0x0610 0x00 0x00
+#define IMX95_PAD_DAP_TDI__NETCMIX_TOP_MQS2_LEFT                      0x0000 0x0204 0x0000 0x01 0x00
+#define IMX95_PAD_DAP_TDI__NETCMIX_TOP_NETC_TMR_1588_ALARM1           0x0000 0x0204 0x0000 0x02 0x00
+#define IMX95_PAD_DAP_TDI__CAN2_TX                                    0x0000 0x0204 0x0000 0x03 0x00
+#define IMX95_PAD_DAP_TDI__FLEXIO2_FLEXIO_BIT30                       0x0000 0x0204 0x0000 0x04 0x00
+#define IMX95_PAD_DAP_TDI__GPIO3_IO_BIT28                             0x0000 0x0204 0x0000 0x05 0x00
+#define IMX95_PAD_DAP_TDI__LPUART5_RX                                 0x0000 0x0204 0x0570 0x06 0x00
+
+#define IMX95_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS                         0x0004 0x0208 0x0614 0x00 0x00
+#define IMX95_PAD_DAP_TMS_SWDIO__CAN4_TX                              0x0004 0x0208 0x0000 0x02 0x00
+#define IMX95_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO_BIT31                 0x0004 0x0208 0x0000 0x04 0x00
+#define IMX95_PAD_DAP_TMS_SWDIO__GPIO3_IO_BIT29                       0x0004 0x0208 0x0000 0x05 0x00
+#define IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B                        0x0004 0x0208 0x0000 0x06 0x00
+
+#define IMX95_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK                        0x0008 0x020C 0x060C 0x00 0x00
+#define IMX95_PAD_DAP_TCLK_SWCLK__CAN4_RX                             0x0008 0x020C 0x044C 0x02 0x00
+#define IMX95_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO_BIT30                0x0008 0x020C 0x0460 0x04 0x00
+#define IMX95_PAD_DAP_TCLK_SWCLK__GPIO3_IO_BIT30                      0x0008 0x020C 0x0000 0x05 0x00
+#define IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B                       0x0008 0x020C 0x056C 0x06 0x00
+
+#define IMX95_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO                      0x000C 0x0210 0x0000 0x00 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__NETCMIX_TOP_MQS2_RIGHT            0x000C 0x0210 0x0000 0x01 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__NETCMIX_TOP_NETC_TMR_1588_ALARM   0x000C 0x0210 0x0000 0x02 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__CAN2_RX                           0x000C 0x0210 0x0444 0x03 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO_BIT31              0x000C 0x0210 0x0464 0x04 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__GPIO3_IO_BIT31                    0x000C 0x0210 0x0000 0x05 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX                        0x000C 0x0210 0x0574 0x06 0x00
+
+#define IMX95_PAD_GPIO_IO00__GPIO2_IO_BIT0                            0x0010 0x0214 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO00__LPI2C3_SDA                               0x0010 0x0214 0x0504 0x11 0x00
+#define IMX95_PAD_GPIO_IO00__LPSPI6_PCS0                              0x0010 0x0214 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO00__LPUART5_TX                               0x0010 0x0214 0x0574 0x05 0x01
+#define IMX95_PAD_GPIO_IO00__LPI2C5_SDA                               0x0010 0x0214 0x0514 0x16 0x00
+#define IMX95_PAD_GPIO_IO00__FLEXIO1_FLEXIO_BIT0                      0x0010 0x0214 0x0468 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO01__GPIO2_IO_BIT1                            0x0014 0x0218 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO01__LPI2C3_SCL                               0x0014 0x0218 0x0500 0x11 0x00
+#define IMX95_PAD_GPIO_IO01__LPSPI6_SIN                               0x0014 0x0218 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO01__LPUART5_RX                               0x0014 0x0218 0x0570 0x05 0x01
+#define IMX95_PAD_GPIO_IO01__LPI2C5_SCL                               0x0014 0x0218 0x0510 0x16 0x00
+#define IMX95_PAD_GPIO_IO01__FLEXIO1_FLEXIO_BIT1                      0x0014 0x0218 0x046C 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO02__GPIO2_IO_BIT2                            0x0018 0x021C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO02__LPI2C4_SDA                               0x0018 0x021C 0x050C 0x11 0x00
+#define IMX95_PAD_GPIO_IO02__LPSPI6_SOUT                              0x0018 0x021C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO02__LPUART5_CTS_B                            0x0018 0x021C 0x056C 0x05 0x01
+#define IMX95_PAD_GPIO_IO02__LPI2C6_SDA                               0x0018 0x021C 0x051C 0x16 0x00
+#define IMX95_PAD_GPIO_IO02__FLEXIO1_FLEXIO_BIT2                      0x0018 0x021C 0x0470 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO03__GPIO2_IO_BIT3                            0x001C 0x0220 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO03__LPI2C4_SCL                               0x001C 0x0220 0x0508 0x11 0x00
+#define IMX95_PAD_GPIO_IO03__LPSPI6_SCK                               0x001C 0x0220 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO03__LPUART5_RTS_B                            0x001C 0x0220 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO03__LPI2C6_SCL                               0x001C 0x0220 0x0518 0x16 0x00
+#define IMX95_PAD_GPIO_IO03__FLEXIO1_FLEXIO_BIT3                      0x001C 0x0220 0x0474 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO04__GPIO2_IO_BIT4                            0x0020 0x0224 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO04__TPM3_CH0                                 0x0020 0x0224 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO04__AONMIX_TOP_PDM_CLK                       0x0020 0x0224 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO04__CAN4_TX                                  0x0020 0x0224 0x0000 0x03 0x00
+#define IMX95_PAD_GPIO_IO04__LPSPI7_PCS0                              0x0020 0x0224 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO04__LPUART6_TX                               0x0020 0x0224 0x0580 0x05 0x01
+#define IMX95_PAD_GPIO_IO04__LPI2C6_SDA                               0x0020 0x0224 0x051C 0x16 0x01
+#define IMX95_PAD_GPIO_IO04__FLEXIO1_FLEXIO_BIT4                      0x0020 0x0224 0x0478 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO05__GPIO2_IO_BIT5                            0x0024 0x0228 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO05__TPM4_CH0                                 0x0024 0x0228 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO05__AONMIX_TOP_PDM_BIT_STREAM_BIT0           0x0024 0x0228 0x040C 0x02 0x01
+#define IMX95_PAD_GPIO_IO05__CAN4_RX                                  0x0024 0x0228 0x044C 0x03 0x01
+#define IMX95_PAD_GPIO_IO05__LPSPI7_SIN                               0x0024 0x0228 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO05__LPUART6_RX                               0x0024 0x0228 0x057C 0x05 0x01
+#define IMX95_PAD_GPIO_IO05__LPI2C6_SCL                               0x0024 0x0228 0x0518 0x16 0x01
+#define IMX95_PAD_GPIO_IO05__FLEXIO1_FLEXIO_BIT5                      0x0024 0x0228 0x047C 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO06__GPIO2_IO_BIT6                            0x0028 0x022C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO06__TPM5_CH0                                 0x0028 0x022C 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO06__AONMIX_TOP_PDM_BIT_STREAM_BIT1           0x0028 0x022C 0x0410 0x02 0x01
+#define IMX95_PAD_GPIO_IO06__LPSPI7_SOUT                              0x0028 0x022C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO06__LPUART6_CTS_B                            0x0028 0x022C 0x0578 0x05 0x01
+#define IMX95_PAD_GPIO_IO06__LPI2C7_SDA                               0x0028 0x022C 0x0524 0x16 0x00
+#define IMX95_PAD_GPIO_IO06__FLEXIO1_FLEXIO_BIT6                      0x0028 0x022C 0x0480 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO07__GPIO2_IO_BIT7                            0x002C 0x0230 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO07__LPSPI3_PCS1                              0x002C 0x0230 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO07__LPSPI7_SCK                               0x002C 0x0230 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO07__LPUART6_RTS_B                            0x002C 0x0230 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO07__LPI2C7_SCL                               0x002C 0x0230 0x0520 0x16 0x00
+#define IMX95_PAD_GPIO_IO07__FLEXIO1_FLEXIO_BIT7                      0x002C 0x0230 0x0484 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO08__GPIO2_IO_BIT8                            0x0030 0x0234 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO08__LPSPI3_PCS0                              0x0030 0x0234 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO08__TPM6_CH0                                 0x0030 0x0234 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO08__LPUART7_TX                               0x0030 0x0234 0x0588 0x05 0x01
+#define IMX95_PAD_GPIO_IO08__LPI2C7_SDA                               0x0030 0x0234 0x0524 0x16 0x01
+#define IMX95_PAD_GPIO_IO08__FLEXIO1_FLEXIO_BIT8                      0x0030 0x0234 0x0488 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO09__GPIO2_IO_BIT9                            0x0034 0x0238 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO09__LPSPI3_SIN                               0x0034 0x0238 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO09__TPM3_EXTCLK                              0x0034 0x0238 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO09__LPUART7_RX                               0x0034 0x0238 0x0584 0x05 0x01
+#define IMX95_PAD_GPIO_IO09__LPI2C7_SCL                               0x0034 0x0238 0x0520 0x16 0x01
+#define IMX95_PAD_GPIO_IO09__FLEXIO1_FLEXIO_BIT9                      0x0034 0x0238 0x048C 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO10__GPIO2_IO_BIT10                           0x0038 0x023C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO10__LPSPI3_SOUT                              0x0038 0x023C 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO10__TPM4_EXTCLK                              0x0038 0x023C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO10__LPUART7_CTS_B                            0x0038 0x023C 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO10__LPI2C8_SDA                               0x0038 0x023C 0x052C 0x16 0x00
+#define IMX95_PAD_GPIO_IO10__FLEXIO1_FLEXIO_BIT10                     0x0038 0x023C 0x0490 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11                           0x003C 0x0240 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO11__LPSPI3_SCK                               0x003C 0x0240 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO11__TPM5_EXTCLK                              0x003C 0x0240 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO11__LPUART7_RTS_B                            0x003C 0x0240 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO11__LPI2C8_SCL                               0x003C 0x0240 0x0528 0x16 0x00
+#define IMX95_PAD_GPIO_IO11__FLEXIO1_FLEXIO_BIT11                     0x003C 0x0240 0x0494 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO12__GPIO2_IO_BIT12                           0x0040 0x0244 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO12__TPM3_CH2                                 0x0040 0x0244 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO12__AONMIX_TOP_PDM_BIT_STREAM_BIT2           0x0040 0x0244 0x0414 0x02 0x00
+#define IMX95_PAD_GPIO_IO12__FLEXIO1_FLEXIO_BIT12                     0x0040 0x0244 0x0498 0x03 0x00
+#define IMX95_PAD_GPIO_IO12__LPSPI8_PCS0                              0x0040 0x0244 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO12__LPUART8_TX                               0x0040 0x0244 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO12__LPI2C8_SDA                               0x0040 0x0244 0x052C 0x16 0x01
+#define IMX95_PAD_GPIO_IO12__SAI3_RX_SYNC                             0x0040 0x0244 0x0590 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO13__GPIO2_IO_BIT13                           0x0044 0x0248 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO13__TPM4_CH2                                 0x0044 0x0248 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO13__AONMIX_TOP_PDM_BIT_STREAM_BIT3           0x0044 0x0248 0x0418 0x02 0x00
+#define IMX95_PAD_GPIO_IO13__LPSPI8_SIN                               0x0044 0x0248 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO13__LPUART8_RX                               0x0044 0x0248 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO13__LPI2C8_SCL                               0x0044 0x0248 0x0528 0x16 0x01
+#define IMX95_PAD_GPIO_IO13__FLEXIO1_FLEXIO_BIT13                     0x0044 0x0248 0x049C 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO14__GPIO2_IO_BIT14                           0x0048 0x024C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO14__LPUART3_TX                               0x0048 0x024C 0x055C 0x01 0x01
+#define IMX95_PAD_GPIO_IO14__LPSPI8_SOUT                              0x0048 0x024C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO14__LPUART8_CTS_B                            0x0048 0x024C 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO14__LPUART4_TX                               0x0048 0x024C 0x0568 0x06 0x01
+#define IMX95_PAD_GPIO_IO14__FLEXIO1_FLEXIO_BIT14                     0x0048 0x024C 0x04A0 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO15__GPIO2_IO_BIT15                           0x004C 0x0250 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO15__LPUART3_RX                               0x004C 0x0250 0x0558 0x01 0x01
+#define IMX95_PAD_GPIO_IO15__LPSPI8_SCK                               0x004C 0x0250 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO15__LPUART8_RTS_B                            0x004C 0x0250 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO15__LPUART4_RX                               0x004C 0x0250 0x0564 0x06 0x01
+#define IMX95_PAD_GPIO_IO15__FLEXIO1_FLEXIO_BIT15                     0x004C 0x0250 0x04A4 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO16__GPIO2_IO_BIT16                           0x0050 0x0254 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK                             0x0050 0x0254 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO16__AONMIX_TOP_PDM_BIT_STREAM_BIT2           0x0050 0x0254 0x0414 0x02 0x01
+#define IMX95_PAD_GPIO_IO16__LPUART3_CTS_B                            0x0050 0x0254 0x0554 0x04 0x01
+#define IMX95_PAD_GPIO_IO16__LPSPI4_PCS2                              0x0050 0x0254 0x0538 0x05 0x01
+#define IMX95_PAD_GPIO_IO16__LPUART4_CTS_B                            0x0050 0x0254 0x0560 0x06 0x01
+#define IMX95_PAD_GPIO_IO16__FLEXIO1_FLEXIO_BIT16                     0x0050 0x0254 0x04A8 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO17__GPIO2_IO_BIT17                           0x0054 0x0258 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO17__SAI3_MCLK                                0x0054 0x0258 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO17__LPUART3_RTS_B                            0x0054 0x0258 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO17__LPSPI4_PCS1                              0x0054 0x0258 0x0534 0x05 0x01
+#define IMX95_PAD_GPIO_IO17__LPUART4_RTS_B                            0x0054 0x0258 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO17__FLEXIO1_FLEXIO_BIT17                     0x0054 0x0258 0x04AC 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18                           0x0058 0x025C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO18__SAI3_RX_BCLK                             0x0058 0x025C 0x058C 0x01 0x00
+#define IMX95_PAD_GPIO_IO18__LPSPI5_PCS0                              0x0058 0x025C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO18__LPSPI4_PCS0                              0x0058 0x025C 0x0530 0x05 0x01
+#define IMX95_PAD_GPIO_IO18__TPM5_CH2                                 0x0058 0x025C 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO18__FLEXIO1_FLEXIO_BIT18                     0x0058 0x025C 0x04B0 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO19__GPIO2_IO_BIT19                           0x005C 0x0260 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO19__SAI3_RX_SYNC                             0x005C 0x0260 0x0590 0x01 0x01
+#define IMX95_PAD_GPIO_IO19__AONMIX_TOP_PDM_BIT_STREAM_BIT3           0x005C 0x0260 0x0418 0x02 0x01
+#define IMX95_PAD_GPIO_IO19__FLEXIO1_FLEXIO_BIT19                     0x005C 0x0260 0x04B4 0x03 0x00
+#define IMX95_PAD_GPIO_IO19__LPSPI5_SIN                               0x005C 0x0260 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO19__LPSPI4_SIN                               0x005C 0x0260 0x0540 0x05 0x01
+#define IMX95_PAD_GPIO_IO19__TPM6_CH2                                 0x005C 0x0260 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO19__SAI3_TX_DATA_BIT0                        0x005C 0x0260 0x0000 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO20__GPIO2_IO_BIT20                           0x0060 0x0264 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0                        0x0060 0x0264 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO20__AONMIX_TOP_PDM_BIT_STREAM_BIT0           0x0060 0x0264 0x040C 0x02 0x02
+#define IMX95_PAD_GPIO_IO20__LPSPI5_SOUT                              0x0060 0x0264 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO20__LPSPI4_SOUT                              0x0060 0x0264 0x0544 0x05 0x01
+#define IMX95_PAD_GPIO_IO20__TPM3_CH1                                 0x0060 0x0264 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO20__FLEXIO1_FLEXIO_BIT20                     0x0060 0x0264 0x04B8 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO21__GPIO2_IO_BIT21                           0x0064 0x0268 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0                        0x0064 0x0268 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO21__AONMIX_TOP_PDM_CLK                       0x0064 0x0268 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO21__FLEXIO1_FLEXIO_BIT21                     0x0064 0x0268 0x04BC 0x03 0x00
+#define IMX95_PAD_GPIO_IO21__LPSPI5_SCK                               0x0064 0x0268 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO21__LPSPI4_SCK                               0x0064 0x0268 0x053C 0x05 0x01
+#define IMX95_PAD_GPIO_IO21__TPM4_CH1                                 0x0064 0x0268 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO21__SAI3_RX_BCLK                             0x0064 0x0268 0x058C 0x07 0x01
+
+#define IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22                           0x0068 0x026C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO22__USDHC3_CLK                               0x0068 0x026C 0x05C8 0x01 0x00
+#define IMX95_PAD_GPIO_IO22__SPDIF_IN                                 0x0068 0x026C 0x0454 0x02 0x02
+#define IMX95_PAD_GPIO_IO22__CAN5_TX                                  0x0068 0x026C 0x0000 0x03 0x00
+#define IMX95_PAD_GPIO_IO22__TPM5_CH1                                 0x0068 0x026C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO22__TPM6_EXTCLK                              0x0068 0x026C 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO22__LPI2C5_SDA                               0x0068 0x026C 0x0514 0x16 0x01
+#define IMX95_PAD_GPIO_IO22__FLEXIO1_FLEXIO_BIT22                     0x0068 0x026C 0x04C0 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO23__GPIO2_IO_BIT23                           0x006C 0x0270 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO23__USDHC3_CMD                               0x006C 0x0270 0x05CC 0x01 0x00
+#define IMX95_PAD_GPIO_IO23__SPDIF_OUT                                0x006C 0x0270 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO23__CAN5_RX                                  0x006C 0x0270 0x0450 0x03 0x00
+#define IMX95_PAD_GPIO_IO23__TPM6_CH1                                 0x006C 0x0270 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO23__LPI2C5_SCL                               0x006C 0x0270 0x0510 0x16 0x01
+#define IMX95_PAD_GPIO_IO23__FLEXIO1_FLEXIO_BIT23                     0x006C 0x0270 0x04C4 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO24__GPIO2_IO_BIT24                           0x0070 0x0274 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO24__USDHC3_DATA0                             0x0070 0x0274 0x05D0 0x01 0x00
+#define IMX95_PAD_GPIO_IO24__TPM3_CH3                                 0x0070 0x0274 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO24__JTAG_MUX_TDO                             0x0070 0x0274 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO24__LPSPI6_PCS1                              0x0070 0x0274 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO24__FLEXIO1_FLEXIO_BIT24                     0x0070 0x0274 0x04C8 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO25__GPIO2_IO_BIT25                           0x0074 0x0278 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO25__USDHC3_DATA1                             0x0074 0x0278 0x05D4 0x01 0x00
+#define IMX95_PAD_GPIO_IO25__CAN2_TX                                  0x0074 0x0278 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO25__TPM4_CH3                                 0x0074 0x0278 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO25__JTAG_MUX_TCK                             0x0074 0x0278 0x060C 0x05 0x01
+#define IMX95_PAD_GPIO_IO25__LPSPI7_PCS1                              0x0074 0x0278 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO25__FLEXIO1_FLEXIO_BIT25                     0x0074 0x0278 0x04CC 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO26__GPIO2_IO_BIT26                           0x0078 0x027C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO26__USDHC3_DATA2                             0x0078 0x027C 0x05D8 0x01 0x00
+#define IMX95_PAD_GPIO_IO26__AONMIX_TOP_PDM_BIT_STREAM_BIT1           0x0078 0x027C 0x0410 0x02 0x02
+#define IMX95_PAD_GPIO_IO26__FLEXIO1_FLEXIO_BIT26                     0x0078 0x027C 0x0458 0x03 0x01
+#define IMX95_PAD_GPIO_IO26__TPM5_CH3                                 0x0078 0x027C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO26__JTAG_MUX_TDI                             0x0078 0x027C 0x0610 0x05 0x01
+#define IMX95_PAD_GPIO_IO26__LPSPI8_PCS1                              0x0078 0x027C 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC                             0x0078 0x027C 0x0000 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO27__GPIO2_IO_BIT27                           0x007C 0x0280 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO27__USDHC3_DATA3                             0x007C 0x0280 0x05DC 0x01 0x00
+#define IMX95_PAD_GPIO_IO27__CAN2_RX                                  0x007C 0x0280 0x0444 0x02 0x02
+#define IMX95_PAD_GPIO_IO27__TPM6_CH3                                 0x007C 0x0280 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO27__JTAG_MUX_TMS                             0x007C 0x0280 0x0614 0x05 0x01
+#define IMX95_PAD_GPIO_IO27__LPSPI5_PCS1                              0x007C 0x0280 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO27__FLEXIO1_FLEXIO_BIT27                     0x007C 0x0280 0x045C 0x07 0x01
+
+#define IMX95_PAD_GPIO_IO28__GPIO2_IO_BIT28                           0x0080 0x0284 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO28__LPI2C3_SDA                               0x0080 0x0284 0x0504 0x11 0x01
+#define IMX95_PAD_GPIO_IO28__CAN3_TX                                  0x0080 0x0284 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO28__FLEXIO1_FLEXIO_BIT28                     0x0080 0x0284 0x0000 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO29__GPIO2_IO_BIT29                           0x0084 0x0288 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO29__LPI2C3_SCL                               0x0084 0x0288 0x0500 0x11 0x01
+#define IMX95_PAD_GPIO_IO29__CAN3_RX                                  0x0084 0x0288 0x0448 0x02 0x01
+#define IMX95_PAD_GPIO_IO29__FLEXIO1_FLEXIO_BIT29                     0x0084 0x0288 0x0000 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO30__GPIO2_IO_BIT30                           0x0088 0x028C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO30__LPI2C4_SDA                               0x0088 0x028C 0x050C 0x11 0x01
+#define IMX95_PAD_GPIO_IO30__CAN5_TX                                  0x0088 0x028C 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO30__FLEXIO1_FLEXIO_BIT30                     0x0088 0x028C 0x0460 0x07 0x01
+
+#define IMX95_PAD_GPIO_IO31__GPIO2_IO_BIT31                           0x008C 0x0290 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO31__LPI2C4_SCL                               0x008C 0x0290 0x0508 0x11 0x01
+#define IMX95_PAD_GPIO_IO31__CAN5_RX                                  0x008C 0x0290 0x0450 0x02 0x01
+#define IMX95_PAD_GPIO_IO31__FLEXIO1_FLEXIO_BIT31                     0x008C 0x0290 0x0464 0x07 0x01
+
+#define IMX95_PAD_GPIO_IO32__GPIO5_IO_BIT12                           0x0090 0x0294 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B               0x0090 0x0294 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO32__LPUART6_TX                               0x0090 0x0294 0x0580 0x02 0x00
+#define IMX95_PAD_GPIO_IO32__LPSPI4_PCS2                              0x0090 0x0294 0x0538 0x04 0x00
+
+#define IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13                           0x0094 0x0298 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO33__LPUART6_RX                               0x0094 0x0298 0x057C 0x02 0x00
+#define IMX95_PAD_GPIO_IO33__LPSPI4_PCS1                              0x0094 0x0298 0x0534 0x04 0x00
+
+#define IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14                           0x0098 0x029C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO34__LPUART6_CTS_B                            0x0098 0x029C 0x0578 0x02 0x00
+#define IMX95_PAD_GPIO_IO34__LPSPI4_PCS0                              0x0098 0x029C 0x0530 0x04 0x00
+
+#define IMX95_PAD_GPIO_IO35__GPIO5_IO_BIT15                           0x009C 0x02A0 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B               0x009C 0x02A0 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO35__LPUART6_RTS_B                            0x009C 0x02A0 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO35__LPSPI4_SIN                               0x009C 0x02A0 0x0540 0x04 0x00
+
+#define IMX95_PAD_GPIO_IO36__LPSPI4_SOUT                              0x00A0 0x02A4 0x0544 0x04 0x00
+#define IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16                           0x00A0 0x02A4 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO36__LPUART7_TX                               0x00A0 0x02A4 0x0588 0x02 0x00
+
+#define IMX95_PAD_GPIO_IO37__GPIO5_IO_BIT17                           0x00A4 0x02A8 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO37__LPUART7_RX                               0x00A4 0x02A8 0x0584 0x02 0x00
+#define IMX95_PAD_GPIO_IO37__LPSPI4_SCK                               0x00A4 0x02A8 0x053C 0x04 0x00
+
+#define IMX95_PAD_CCM_CLKO1__CCMSRCGPCMIX_TOP_CLKO_1                  0x00A8 0x02AC 0x0000 0x00 0x00
+#define IMX95_PAD_CCM_CLKO1__NETCMIX_TOP_NETC_TMR_1588_TRIG1          0x00A8 0x02AC 0x0434 0x01 0x00
+#define IMX95_PAD_CCM_CLKO1__FLEXIO1_FLEXIO_BIT26                     0x00A8 0x02AC 0x0458 0x04 0x00
+#define IMX95_PAD_CCM_CLKO1__GPIO3_IO_BIT26                           0x00A8 0x02AC 0x0000 0x05 0x00
+
+#define IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27                           0x00AC 0x02B0 0x0000 0x05 0x00
+#define IMX95_PAD_CCM_CLKO2__CCMSRCGPCMIX_TOP_CLKO_2                  0x00AC 0x02B0 0x0000 0x00 0x00
+#define IMX95_PAD_CCM_CLKO2__NETCMIX_TOP_NETC_TMR_1588_PP1            0x00AC 0x02B0 0x0000 0x01 0x00
+#define IMX95_PAD_CCM_CLKO2__FLEXIO1_FLEXIO_BIT27                     0x00AC 0x02B0 0x045C 0x04 0x00
+
+#define IMX95_PAD_CCM_CLKO3__CCMSRCGPCMIX_TOP_CLKO_3                  0x00B0 0x02B4 0x0000 0x00 0x00
+#define IMX95_PAD_CCM_CLKO3__NETCMIX_TOP_NETC_TMR_1588_TRIG2          0x00B0 0x02B4 0x0438 0x01 0x00
+#define IMX95_PAD_CCM_CLKO3__CAN3_TX                                  0x00B0 0x02B4 0x0000 0x02 0x00
+#define IMX95_PAD_CCM_CLKO3__FLEXIO2_FLEXIO_BIT28                     0x00B0 0x02B4 0x0000 0x04 0x00
+#define IMX95_PAD_CCM_CLKO3__GPIO4_IO_BIT28                           0x00B0 0x02B4 0x0000 0x05 0x00
+
+#define IMX95_PAD_CCM_CLKO4__CCMSRCGPCMIX_TOP_CLKO_4                  0x00B4 0x02B8 0x0000 0x00 0x00
+#define IMX95_PAD_CCM_CLKO4__NETCMIX_TOP_NETC_TMR_1588_PP2            0x00B4 0x02B8 0x0000 0x01 0x00
+#define IMX95_PAD_CCM_CLKO4__CAN3_RX                                  0x00B4 0x02B8 0x0448 0x02 0x00
+#define IMX95_PAD_CCM_CLKO4__FLEXIO2_FLEXIO_BIT29                     0x00B4 0x02B8 0x0000 0x04 0x00
+#define IMX95_PAD_CCM_CLKO4__GPIO4_IO_BIT29                           0x00B4 0x02B8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC                     0x00B8 0x02BC 0x0424 0x00 0x00
+#define IMX95_PAD_ENET1_MDC__LPUART3_DCD_B                            0x00B8 0x02BC 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_MDC__I3C2_SCL                                 0x00B8 0x02BC 0x04F8 0x02 0x00
+#define IMX95_PAD_ENET1_MDC__HSIOMIX_TOP_USB1_OTG_ID                  0x00B8 0x02BC 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_MDC__FLEXIO2_FLEXIO_BIT0                      0x00B8 0x02BC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_MDC__GPIO4_IO_BIT0                            0x00B8 0x02BC 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO                   0x00BC 0x02C0 0x0428 0x00 0x00
+#define IMX95_PAD_ENET1_MDIO__LPUART3_RIN_B                           0x00BC 0x02C0 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_MDIO__I3C2_SDA                                0x00BC 0x02C0 0x04FC 0x02 0x00
+#define IMX95_PAD_ENET1_MDIO__HSIOMIX_TOP_USB1_OTG_PWR                0x00BC 0x02C0 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_MDIO__FLEXIO2_FLEXIO_BIT1                     0x00BC 0x02C0 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_MDIO__GPIO4_IO_BIT1                           0x00BC 0x02C0 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3               0x00C0 0x02C4 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TD3__CAN2_TX                                  0x00C0 0x02C4 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_TD3__HSIOMIX_TOP_USB2_OTG_ID                  0x00C0 0x02C4 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_TD3__FLEXIO2_FLEXIO_BIT2                      0x00C0 0x02C4 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TD3__GPIO4_IO_BIT2                            0x00C0 0x02C4 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2               0x00C4 0x02C8 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RMII_REF50_CLK          0x00C4 0x02C8 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_TD2__CAN2_RX                                  0x00C4 0x02C8 0x0444 0x02 0x01
+#define IMX95_PAD_ENET1_TD2__HSIOMIX_TOP_USB2_OTG_OC                  0x00C4 0x02C8 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_TD2__FLEXIO2_FLEXIO_BIT3                      0x00C4 0x02C8 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TD2__GPIO4_IO_BIT3                            0x00C4 0x02C8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1               0x00C8 0x02CC 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TD1__LPUART3_RTS_B                            0x00C8 0x02CC 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_TD1__I3C2_PUR                                 0x00C8 0x02CC 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_TD1__HSIOMIX_TOP_USB1_OTG_OC                  0x00C8 0x02CC 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_TD1__FLEXIO2_FLEXIO_BIT4                      0x00C8 0x02CC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TD1__GPIO4_IO_BIT4                            0x00C8 0x02CC 0x0000 0x05 0x00
+#define IMX95_PAD_ENET1_TD1__I3C2_PUR_B                               0x00C8 0x02CC 0x0000 0x06 0x00
+#define IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RMII_TXD1               0x00C8 0x02CC 0x0000 0x07 0x00
+
+#define IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0               0x00CC 0x02D0 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TD0__LPUART3_TX                               0x00CC 0x02D0 0x055C 0x01 0x00
+#define IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RMII_TXD0               0x00CC 0x02D0 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_TD0__FLEXIO2_FLEXIO_BIT5                      0x00CC 0x02D0 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TD0__GPIO4_IO_BIT5                            0x00CC 0x02D0 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL         0x00D0 0x02D4 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TX_CTL__LPUART3_DTR_B                         0x00D0 0x02D4 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RMII_TX_EN           0x00D0 0x02D4 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO_BIT6                   0x00D0 0x02D4 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TX_CTL__GPIO4_IO_BIT6                         0x00D0 0x02D4 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK            0x00D4 0x02D8 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TXC__CCMSRCGPCMIX_TOP_ENET_CLK_ROOT           0x00D4 0x02D8 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_TXC__FLEXIO2_FLEXIO_BIT7                      0x00D4 0x02D8 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TXC__GPIO4_IO_BIT7                            0x00D4 0x02D8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL         0x00D8 0x02DC 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RX_CTL__LPUART3_DSR_B                         0x00D8 0x02DC 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RMII_CRS_DV          0x00D8 0x02DC 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_RX_CTL__HSIOMIX_TOP_USB2_OTG_PWR              0x00D8 0x02DC 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO_BIT8                   0x00D8 0x02DC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RX_CTL__GPIO4_IO_BIT8                         0x00D8 0x02DC 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK            0x00DC 0x02E0 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RMII_RX_ER              0x00DC 0x02E0 0x042C 0x01 0x00
+#define IMX95_PAD_ENET1_RXC__FLEXIO2_FLEXIO_BIT9                      0x00DC 0x02E0 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RXC__GPIO4_IO_BIT9                            0x00DC 0x02E0 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0               0x00E0 0x02E4 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RD0__LPUART3_RX                               0x00E0 0x02E4 0x0558 0x01 0x00
+#define IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RMII_RXD0               0x00E0 0x02E4 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_RD0__FLEXIO2_FLEXIO_BIT10                     0x00E0 0x02E4 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RD0__GPIO4_IO_BIT10                           0x00E0 0x02E4 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1               0x00E4 0x02E8 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RD1__LPUART3_CTS_B                            0x00E4 0x02E8 0x0554 0x01 0x00
+#define IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RMII_RXD1               0x00E4 0x02E8 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_RD1__LPTMR2_ALT1                              0x00E4 0x02E8 0x0548 0x03 0x00
+#define IMX95_PAD_ENET1_RD1__FLEXIO2_FLEXIO_BIT11                     0x00E4 0x02E8 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RD1__GPIO4_IO_BIT11                           0x00E4 0x02E8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2               0x00E8 0x02EC 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RMII_RX_ER              0x00E8 0x02EC 0x042C 0x02 0x01
+#define IMX95_PAD_ENET1_RD2__LPTMR2_ALT2                              0x00E8 0x02EC 0x054C 0x03 0x00
+#define IMX95_PAD_ENET1_RD2__FLEXIO2_FLEXIO_BIT12                     0x00E8 0x02EC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RD2__GPIO4_IO_BIT12                           0x00E8 0x02EC 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3               0x00EC 0x02F0 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RD3__LPTMR2_ALT3                              0x00EC 0x02F0 0x0550 0x03 0x00
+#define IMX95_PAD_ENET1_RD3__FLEXIO2_FLEXIO_BIT13                     0x00EC 0x02F0 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RD3__GPIO4_IO_BIT13                           0x00EC 0x02F0 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC                     0x00F0 0x02F4 0x0424 0x00 0x01
+#define IMX95_PAD_ENET2_MDC__LPUART4_DCD_B                            0x00F0 0x02F4 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC                 0x00F0 0x02F4 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_MDC__FLEXIO2_FLEXIO_BIT14                     0x00F0 0x02F4 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_MDC__GPIO4_IO_BIT14                           0x00F0 0x02F4 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO                   0x00F4 0x02F8 0x0428 0x00 0x01
+#define IMX95_PAD_ENET2_MDIO__LPUART4_RIN_B                           0x00F4 0x02F8 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK                0x00F4 0x02F8 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_MDIO__FLEXIO2_FLEXIO_BIT15                    0x00F4 0x02F8 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_MDIO__GPIO4_IO_BIT15                          0x00F4 0x02F8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0            0x00F8 0x02FC 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TD3__FLEXIO2_FLEXIO_BIT16                     0x00F8 0x02FC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TD3__GPIO4_IO_BIT16                           0x00F8 0x02FC 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3               0x00F8 0x02FC 0x0000 0x00 0x00
+
+#define IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2               0x00FC 0x0300 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RMII_REF50_CLK          0x00FC 0x0300 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1            0x00FC 0x0300 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TD2__SAI4_TX_SYNC                             0x00FC 0x0300 0x05A4 0x03 0x00
+#define IMX95_PAD_ENET2_TD2__FLEXIO2_FLEXIO_BIT17                     0x00FC 0x0300 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TD2__GPIO4_IO_BIT17                           0x00FC 0x0300 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1               0x0100 0x0304 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TD1__LPUART4_RTS_B                            0x0100 0x0304 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_TD1__NETCMIX_TOP_SAI2_RX_DATA_BIT2            0x0100 0x0304 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TD1__SAI4_TX_BCLK                             0x0100 0x0304 0x05A0 0x03 0x00
+#define IMX95_PAD_ENET2_TD1__FLEXIO2_FLEXIO_BIT18                     0x0100 0x0304 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TD1__GPIO4_IO_BIT18                           0x0100 0x0304 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RMII_TXD1               0x0100 0x0304 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0               0x0104 0x0308 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TD0__LPUART4_TX                               0x0104 0x0308 0x0568 0x01 0x00
+#define IMX95_PAD_ENET2_TD0__NETCMIX_TOP_SAI2_RX_DATA_BIT3            0x0104 0x0308 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TD0__SAI4_TX_DATA_BIT0                        0x0104 0x0308 0x0000 0x03 0x00
+#define IMX95_PAD_ENET2_TD0__FLEXIO2_FLEXIO_BIT19                     0x0104 0x0308 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TD0__GPIO4_IO_BIT19                           0x0104 0x0308 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RMII_TXD0               0x0104 0x0308 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL         0x0108 0x030C 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TX_CTL__LPUART4_DTR_B                         0x0108 0x030C 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC              0x0108 0x030C 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RMII_TX_EN           0x0108 0x030C 0x0000 0x03 0x00
+#define IMX95_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO_BIT20                  0x0108 0x030C 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TX_CTL__GPIO4_IO_BIT20                        0x0108 0x030C 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK            0x010C 0x0310 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TXC__CCMSRCGPCMIX_TOP_ENET_CLK_ROOT           0x010C 0x0310 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK                 0x010C 0x0310 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TXC__FLEXIO2_FLEXIO_BIT21                     0x010C 0x0310 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TXC__GPIO4_IO_BIT21                           0x010C 0x0310 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL         0x0110 0x0314 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RX_CTL__LPUART4_DSR_B                         0x0110 0x0314 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0         0x0110 0x0314 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO_BIT22                  0x0110 0x0314 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RX_CTL__GPIO4_IO_BIT22                        0x0110 0x0314 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RMII_CRS_DV          0x0110 0x0314 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK            0x0114 0x0318 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RMII_RX_ER              0x0114 0x0318 0x0430 0x01 0x00
+#define IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1            0x0114 0x0318 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RXC__SAI4_RX_SYNC                             0x0114 0x0318 0x059C 0x03 0x00
+#define IMX95_PAD_ENET2_RXC__FLEXIO2_FLEXIO_BIT23                     0x0114 0x0318 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RXC__GPIO4_IO_BIT23                           0x0114 0x0318 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0               0x0118 0x031C 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RD0__LPUART4_RX                               0x0118 0x031C 0x0564 0x01 0x00
+#define IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2            0x0118 0x031C 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RD0__SAI4_RX_BCLK                             0x0118 0x031C 0x0594 0x03 0x00
+#define IMX95_PAD_ENET2_RD0__FLEXIO2_FLEXIO_BIT24                     0x0118 0x031C 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RD0__GPIO4_IO_BIT24                           0x0118 0x031C 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RMII_RXD0               0x0118 0x031C 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1               0x011C 0x0320 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RD1__SPDIF_IN                                 0x011C 0x0320 0x0454 0x01 0x00
+#define IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3            0x011C 0x0320 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RD1__SAI4_RX_DATA_BIT0                        0x011C 0x0320 0x0598 0x03 0x00
+#define IMX95_PAD_ENET2_RD1__FLEXIO2_FLEXIO_BIT25                     0x011C 0x0320 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RD1__GPIO4_IO_BIT25                           0x011C 0x0320 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RMII_RXD1               0x011C 0x0320 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2               0x0120 0x0324 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RD2__LPUART4_CTS_B                            0x0120 0x0324 0x0560 0x01 0x00
+#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK                    0x0120 0x0324 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_MQS2_RIGHT                   0x0120 0x0324 0x0000 0x03 0x00
+#define IMX95_PAD_ENET2_RD2__FLEXIO2_FLEXIO_BIT26                     0x0120 0x0324 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RD2__GPIO4_IO_BIT26                           0x0120 0x0324 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RMII_RX_ER              0x0120 0x0324 0x0430 0x06 0x01
+
+#define IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3               0x0124 0x0328 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RD3__SPDIF_OUT                                0x0124 0x0328 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_RD3__SPDIF_IN                                 0x0124 0x0328 0x0454 0x02 0x01
+#define IMX95_PAD_ENET2_RD3__NETCMIX_TOP_MQS2_LEFT                    0x0124 0x0328 0x0000 0x03 0x00
+#define IMX95_PAD_ENET2_RD3__FLEXIO2_FLEXIO_BIT27                     0x0124 0x0328 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RD3__GPIO4_IO_BIT27                           0x0124 0x0328 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_CLK__FLEXIO1_FLEXIO_BIT8                        0x0128 0x032C 0x0488 0x04 0x01
+#define IMX95_PAD_SD1_CLK__GPIO3_IO_BIT8                              0x0128 0x032C 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_CLK__USDHC1_CLK                                 0x0128 0x032C 0x0000 0x00 0x00
+
+#define IMX95_PAD_SD1_CMD__USDHC1_CMD                                 0x012C 0x0330 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_CMD__FLEXIO1_FLEXIO_BIT9                        0x012C 0x0330 0x048C 0x04 0x01
+#define IMX95_PAD_SD1_CMD__GPIO3_IO_BIT9                              0x012C 0x0330 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_DATA0__USDHC1_DATA0                             0x0130 0x0334 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA0__FLEXIO1_FLEXIO_BIT10                     0x0130 0x0334 0x0490 0x04 0x01
+#define IMX95_PAD_SD1_DATA0__GPIO3_IO_BIT10                           0x0130 0x0334 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_DATA1__USDHC1_DATA1                             0x0134 0x0338 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA1__FLEXIO1_FLEXIO_BIT11                     0x0134 0x0338 0x0494 0x04 0x01
+#define IMX95_PAD_SD1_DATA1__GPIO3_IO_BIT11                           0x0134 0x0338 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_DATA2__USDHC1_DATA2                             0x0138 0x033C 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA2__FLEXIO1_FLEXIO_BIT12                     0x0138 0x033C 0x0498 0x04 0x01
+#define IMX95_PAD_SD1_DATA2__GPIO3_IO_BIT12                           0x0138 0x033C 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA2__CCMSRCGPCMIX_TOP_PMIC_READY              0x0138 0x033C 0x0000 0x06 0x00
+
+#define IMX95_PAD_SD1_DATA3__USDHC1_DATA3                             0x013C 0x0340 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B                         0x013C 0x0340 0x0000 0x01 0x00
+#define IMX95_PAD_SD1_DATA3__FLEXIO1_FLEXIO_BIT13                     0x013C 0x0340 0x049C 0x04 0x01
+#define IMX95_PAD_SD1_DATA3__GPIO3_IO_BIT13                           0x013C 0x0340 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_DATA4__USDHC1_DATA4                             0x0140 0x0344 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA4__FLEXSPI1_A_DATA_BIT4                     0x0140 0x0344 0x04E4 0x01 0x00
+#define IMX95_PAD_SD1_DATA4__FLEXIO1_FLEXIO_BIT14                     0x0140 0x0344 0x04A0 0x04 0x01
+#define IMX95_PAD_SD1_DATA4__GPIO3_IO_BIT14                           0x0140 0x0344 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA4__XSPI_DATA_BIT4                           0x0140 0x0344 0x05FC 0x06 0x00
+
+#define IMX95_PAD_SD1_DATA5__USDHC1_DATA5                             0x0144 0x0348 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA5__FLEXSPI1_A_DATA_BIT5                     0x0144 0x0348 0x04E8 0x01 0x00
+#define IMX95_PAD_SD1_DATA5__USDHC1_RESET_B                           0x0144 0x0348 0x0000 0x02 0x00
+#define IMX95_PAD_SD1_DATA5__FLEXIO1_FLEXIO_BIT15                     0x0144 0x0348 0x04A4 0x04 0x01
+#define IMX95_PAD_SD1_DATA5__GPIO3_IO_BIT15                           0x0144 0x0348 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA5__XSPI_DATA_BIT5                           0x0144 0x0348 0x0600 0x06 0x00
+
+#define IMX95_PAD_SD1_DATA6__USDHC1_DATA6                             0x0148 0x034C 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA6__FLEXSPI1_A_DATA_BIT6                     0x0148 0x034C 0x04EC 0x01 0x00
+#define IMX95_PAD_SD1_DATA6__USDHC1_CD_B                              0x0148 0x034C 0x0000 0x02 0x00
+#define IMX95_PAD_SD1_DATA6__FLEXIO1_FLEXIO_BIT16                     0x0148 0x034C 0x04A8 0x04 0x01
+#define IMX95_PAD_SD1_DATA6__GPIO3_IO_BIT16                           0x0148 0x034C 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA6__XSPI_DATA_BIT6                           0x0148 0x034C 0x0604 0x06 0x00
+
+#define IMX95_PAD_SD1_DATA7__USDHC1_DATA7                             0x014C 0x0350 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA7__FLEXSPI1_A_DATA_BIT7                     0x014C 0x0350 0x04F0 0x01 0x00
+#define IMX95_PAD_SD1_DATA7__USDHC1_WP                                0x014C 0x0350 0x0000 0x02 0x00
+#define IMX95_PAD_SD1_DATA7__FLEXIO1_FLEXIO_BIT17                     0x014C 0x0350 0x04AC 0x04 0x01
+#define IMX95_PAD_SD1_DATA7__GPIO3_IO_BIT17                           0x014C 0x0350 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA7__XSPI_DATA_BIT7                           0x014C 0x0350 0x0608 0x06 0x00
+
+#define IMX95_PAD_SD1_STROBE__USDHC1_STROBE                           0x0150 0x0354 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_STROBE__FLEXSPI1_A_DQS                          0x0150 0x0354 0x04D0 0x01 0x00
+#define IMX95_PAD_SD1_STROBE__FLEXIO1_FLEXIO_BIT18                    0x0150 0x0354 0x04B0 0x04 0x01
+#define IMX95_PAD_SD1_STROBE__GPIO3_IO_BIT18                          0x0150 0x0354 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_STROBE__XSPI_DQS                                0x0150 0x0354 0x05E4 0x06 0x00
+
+#define IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT                         0x0154 0x0358 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_VSELECT__USDHC2_WP                              0x0154 0x0358 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_VSELECT__LPTMR2_ALT3                            0x0154 0x0358 0x0550 0x02 0x01
+#define IMX95_PAD_SD2_VSELECT__FLEXIO1_FLEXIO_BIT19                   0x0154 0x0358 0x04B4 0x04 0x01
+#define IMX95_PAD_SD2_VSELECT__GPIO3_IO_BIT19                         0x0154 0x0358 0x0000 0x05 0x00
+#define IMX95_PAD_SD2_VSELECT__CCMSRCGPCMIX_TOP_EXT_CLK1              0x0154 0x0358 0x0420 0x06 0x01
+
+#define IMX95_PAD_SD3_CLK__USDHC3_CLK                                 0x0158 0x035C 0x05C8 0x00 0x01
+#define IMX95_PAD_SD3_CLK__FLEXSPI1_A_SCLK                            0x0158 0x035C 0x04F4 0x01 0x00
+#define IMX95_PAD_SD3_CLK__SAI5_TX_DATA_BIT1                          0x0158 0x035C 0x0000 0x02 0x00
+#define IMX95_PAD_SD3_CLK__SAI5_RX_DATA_BIT0                          0x0158 0x035C 0x05AC 0x03 0x00
+#define IMX95_PAD_SD3_CLK__FLEXIO1_FLEXIO_BIT20                       0x0158 0x035C 0x04B8 0x04 0x01
+#define IMX95_PAD_SD3_CLK__GPIO3_IO_BIT20                             0x0158 0x035C 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_CLK__XSPI_CLK                                   0x0158 0x035C 0x05E8 0x06 0x00
+
+#define IMX95_PAD_SD3_CMD__USDHC3_CMD                                 0x015C 0x0360 0x05CC 0x00 0x01
+#define IMX95_PAD_SD3_CMD__FLEXSPI1_A_SS0_B                           0x015C 0x0360 0x0000 0x01 0x00
+#define IMX95_PAD_SD3_CMD__SAI5_TX_DATA_BIT2                          0x015C 0x0360 0x0000 0x02 0x00
+#define IMX95_PAD_SD3_CMD__SAI5_RX_SYNC                               0x015C 0x0360 0x05BC 0x03 0x00
+#define IMX95_PAD_SD3_CMD__FLEXIO1_FLEXIO_BIT21                       0x015C 0x0360 0x04BC 0x04 0x01
+#define IMX95_PAD_SD3_CMD__GPIO3_IO_BIT21                             0x015C 0x0360 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_CMD__XSPI_CS                                    0x015C 0x0360 0x05E0 0x06 0x00
+
+#define IMX95_PAD_SD3_DATA0__USDHC3_DATA0                             0x0160 0x0364 0x05D0 0x00 0x01
+#define IMX95_PAD_SD3_DATA0__FLEXSPI1_A_DATA_BIT0                     0x0160 0x0364 0x04D4 0x01 0x00
+#define IMX95_PAD_SD3_DATA0__SAI5_TX_DATA_BIT3                        0x0160 0x0364 0x0000 0x02 0x00
+#define IMX95_PAD_SD3_DATA0__SAI5_RX_BCLK                             0x0160 0x0364 0x05A8 0x03 0x00
+#define IMX95_PAD_SD3_DATA0__FLEXIO1_FLEXIO_BIT22                     0x0160 0x0364 0x04C0 0x04 0x01
+#define IMX95_PAD_SD3_DATA0__GPIO3_IO_BIT22                           0x0160 0x0364 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_DATA0__XSPI_DATA_BIT0                           0x0160 0x0364 0x05EC 0x06 0x00
+
+#define IMX95_PAD_SD3_DATA1__USDHC3_DATA1                             0x0164 0x0368 0x05D4 0x00 0x01
+#define IMX95_PAD_SD3_DATA1__FLEXSPI1_A_DATA_BIT1                     0x0164 0x0368 0x04D8 0x01 0x00
+#define IMX95_PAD_SD3_DATA1__SAI5_RX_DATA_BIT1                        0x0164 0x0368 0x05B0 0x02 0x00
+#define IMX95_PAD_SD3_DATA1__SAI5_TX_DATA_BIT0                        0x0164 0x0368 0x0000 0x03 0x00
+#define IMX95_PAD_SD3_DATA1__FLEXIO1_FLEXIO_BIT23                     0x0164 0x0368 0x04C4 0x04 0x01
+#define IMX95_PAD_SD3_DATA1__GPIO3_IO_BIT23                           0x0164 0x0368 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_DATA1__XSPI_DATA_BIT1                           0x0164 0x0368 0x05F0 0x06 0x00
+
+#define IMX95_PAD_SD3_DATA2__USDHC3_DATA2                             0x0168 0x036C 0x05D8 0x00 0x01
+#define IMX95_PAD_SD3_DATA2__FLEXSPI1_A_DATA_BIT2                     0x0168 0x036C 0x04DC 0x01 0x00
+#define IMX95_PAD_SD3_DATA2__SAI5_RX_DATA_BIT2                        0x0168 0x036C 0x05B4 0x02 0x00
+#define IMX95_PAD_SD3_DATA2__SAI5_TX_SYNC                             0x0168 0x036C 0x05C4 0x03 0x00
+#define IMX95_PAD_SD3_DATA2__FLEXIO1_FLEXIO_BIT24                     0x0168 0x036C 0x04C8 0x04 0x01
+#define IMX95_PAD_SD3_DATA2__GPIO3_IO_BIT24                           0x0168 0x036C 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_DATA2__XSPI_DATA_BIT2                           0x0168 0x036C 0x05F4 0x06 0x00
+
+#define IMX95_PAD_SD3_DATA3__USDHC3_DATA3                             0x016C 0x0370 0x05DC 0x00 0x01
+#define IMX95_PAD_SD3_DATA3__FLEXSPI1_A_DATA_BIT3                     0x016C 0x0370 0x04E0 0x01 0x00
+#define IMX95_PAD_SD3_DATA3__SAI5_RX_DATA_BIT3                        0x016C 0x0370 0x05B8 0x02 0x00
+#define IMX95_PAD_SD3_DATA3__SAI5_TX_BCLK                             0x016C 0x0370 0x05C0 0x03 0x00
+#define IMX95_PAD_SD3_DATA3__FLEXIO1_FLEXIO_BIT25                     0x016C 0x0370 0x04CC 0x04 0x01
+#define IMX95_PAD_SD3_DATA3__GPIO3_IO_BIT25                           0x016C 0x0370 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_DATA3__XSPI_DATA_BIT3                           0x016C 0x0370 0x05F8 0x06 0x00
+
+#define IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0                   0x0170 0x0374 0x04D4 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA0__NETCMIX_TOP_SAI2_TX_DATA_BIT4          0x0170 0x0374 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA0__SAI4_TX_BCLK                           0x0170 0x0374 0x05A0 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA0__SAI4_RX_DATA_BIT1                      0x0170 0x0374 0x0000 0x03 0x00
+#define IMX95_PAD_XSPI1_DATA0__XSPI_DATA_BIT0                         0x0170 0x0374 0x05EC 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA0__GPIO5_IO_BIT0                          0x0170 0x0374 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1                   0x0174 0x0378 0x04D8 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA1__NETCMIX_TOP_SAI2_TX_DATA_BIT5          0x0174 0x0378 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA1__SAI4_TX_SYNC                           0x0174 0x0378 0x05A4 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA1__SAI4_TX_DATA_BIT1                      0x0174 0x0378 0x0000 0x03 0x00
+#define IMX95_PAD_XSPI1_DATA1__XSPI_DATA_BIT1                         0x0174 0x0378 0x05F0 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA1__GPIO5_IO_BIT1                          0x0174 0x0378 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2                   0x0178 0x037C 0x04DC 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA2__NETCMIX_TOP_SAI2_TX_DATA_BIT6          0x0178 0x037C 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA2__SAI4_TX_DATA_BIT0                      0x0178 0x037C 0x0000 0x02 0x00
+#define IMX95_PAD_XSPI1_DATA2__XSPI_DATA_BIT2                         0x0178 0x037C 0x05F4 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA2__GPIO5_IO_BIT2                          0x0178 0x037C 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3                   0x017C 0x0380 0x04E0 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA3__NETCMIX_TOP_SAI2_TX_DATA_BIT7          0x017C 0x0380 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA3__SAI4_RX_DATA_BIT0                      0x017C 0x0380 0x0598 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA3__XSPI_DATA_BIT3                         0x017C 0x0380 0x05F8 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA3__GPIO5_IO_BIT3                          0x017C 0x0380 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4                   0x0180 0x0384 0x04E4 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0                      0x0180 0x0384 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA4__SAI5_RX_DATA_BIT1                      0x0180 0x0384 0x05B0 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA4__XSPI_DATA_BIT4                         0x0180 0x0384 0x05FC 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA4__GPIO5_IO_BIT4                          0x0180 0x0384 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5                   0x0184 0x0388 0x04E8 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC                           0x0184 0x0388 0x05C4 0x01 0x01
+#define IMX95_PAD_XSPI1_DATA5__SAI5_RX_DATA_BIT2                      0x0184 0x0388 0x05B4 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA5__NETCMIX_TOP_SAI2_RX_DATA_BIT6          0x0184 0x0388 0x043C 0x03 0x00
+#define IMX95_PAD_XSPI1_DATA5__XSPI_DATA_BIT5                         0x0184 0x0388 0x0600 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA5__GPIO5_IO_BIT5                          0x0184 0x0388 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6                   0x0188 0x038C 0x04EC 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK                           0x0188 0x038C 0x05C0 0x01 0x01
+#define IMX95_PAD_XSPI1_DATA6__SAI5_RX_DATA_BIT3                      0x0188 0x038C 0x05B8 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA6__NETCMIX_TOP_SAI2_RX_DATA_BIT7          0x0188 0x038C 0x0440 0x03 0x00
+#define IMX95_PAD_XSPI1_DATA6__XSPI_DATA_BIT6                         0x0188 0x038C 0x0604 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA6__GPIO5_IO_BIT6                          0x0188 0x038C 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7                   0x018C 0x0390 0x04F0 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0                      0x018C 0x0390 0x05AC 0x01 0x01
+#define IMX95_PAD_XSPI1_DATA7__SAI5_TX_DATA_BIT1                      0x018C 0x0390 0x0000 0x02 0x00
+#define IMX95_PAD_XSPI1_DATA7__XSPI_DATA_BIT7                         0x018C 0x0390 0x0608 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA7__GPIO5_IO_BIT7                          0x018C 0x0390 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS                           0x0190 0x0394 0x04D0 0x00 0x01
+#define IMX95_PAD_XSPI1_DQS__SAI5_RX_SYNC                             0x0190 0x0394 0x05BC 0x01 0x01
+#define IMX95_PAD_XSPI1_DQS__SAI5_TX_DATA_BIT2                        0x0190 0x0394 0x0000 0x02 0x00
+#define IMX95_PAD_XSPI1_DQS__NETCMIX_TOP_SAI2_RX_DATA_BIT6            0x0190 0x0394 0x043C 0x03 0x01
+#define IMX95_PAD_XSPI1_DQS__XSPI_DQS                                 0x0190 0x0394 0x05E4 0x04 0x01
+#define IMX95_PAD_XSPI1_DQS__GPIO5_IO_BIT8                            0x0190 0x0394 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK                         0x0194 0x0398 0x04F4 0x00 0x01
+#define IMX95_PAD_XSPI1_SCLK__NETCMIX_TOP_SAI2_RX_DATA_BIT4           0x0194 0x0398 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_SCLK__SAI4_RX_SYNC                            0x0194 0x0398 0x059C 0x02 0x01
+#define IMX95_PAD_XSPI1_SCLK__EARC_DC_HPD_IN                          0x0194 0x0398 0x0000 0x03 0x00
+#define IMX95_PAD_XSPI1_SCLK__XSPI_CLK                                0x0194 0x0398 0x05E8 0x04 0x01
+#define IMX95_PAD_XSPI1_SCLK__GPIO5_IO_BIT9                           0x0194 0x0398 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B                       0x0198 0x039C 0x0000 0x00 0x00
+#define IMX95_PAD_XSPI1_SS0_B__NETCMIX_TOP_SAI2_RX_DATA_BIT5          0x0198 0x039C 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_SS0_B__SAI4_RX_BCLK                           0x0198 0x039C 0x0594 0x02 0x01
+#define IMX95_PAD_XSPI1_SS0_B__EARC_CEC_OUT                           0x0198 0x039C 0x0000 0x03 0x00
+#define IMX95_PAD_XSPI1_SS0_B__XSPI_CS                                0x0198 0x039C 0x05E0 0x04 0x01
+#define IMX95_PAD_XSPI1_SS0_B__GPIO5_IO_BIT10                         0x0198 0x039C 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_SS1_B__FLEXSPI1_A_SS1_B                       0x019C 0x03A0 0x0000 0x00 0x00
+#define IMX95_PAD_XSPI1_SS1_B__SAI5_RX_BCLK                           0x019C 0x03A0 0x05A8 0x01 0x01
+#define IMX95_PAD_XSPI1_SS1_B__SAI5_TX_DATA_BIT3                      0x019C 0x03A0 0x0000 0x02 0x00
+#define IMX95_PAD_XSPI1_SS1_B__NETCMIX_TOP_SAI2_RX_DATA_BIT7          0x019C 0x03A0 0x0440 0x03 0x01
+#define IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11                         0x019C 0x03A0 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_CD_B__USDHC2_CD_B                               0x01A0 0x03A4 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_CD_B__NETCMIX_TOP_NETC_TMR_1588_TRIG1           0x01A0 0x03A4 0x0434 0x01 0x01
+#define IMX95_PAD_SD2_CD_B__I3C2_SCL                                  0x01A0 0x03A4 0x04F8 0x02 0x01
+#define IMX95_PAD_SD2_CD_B__FLEXIO1_FLEXIO_BIT0                       0x01A0 0x03A4 0x0468 0x04 0x01
+#define IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0                             0x01A0 0x03A4 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_CLK__USDHC2_CLK                                 0x01A4 0x03A8 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_CLK__NETCMIX_TOP_NETC_TMR_1588_PP1              0x01A4 0x03A8 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_CLK__I3C2_SDA                                   0x01A4 0x03A8 0x04FC 0x02 0x01
+#define IMX95_PAD_SD2_CLK__FLEXIO1_FLEXIO_BIT1                        0x01A4 0x03A8 0x046C 0x04 0x01
+#define IMX95_PAD_SD2_CLK__GPIO3_IO_BIT1                              0x01A4 0x03A8 0x0000 0x05 0x00
+#define IMX95_PAD_SD2_CLK__CCMSRCGPCMIX_TOP_OBSERVE_0                 0x01A4 0x03A8 0x0000 0x06 0x00
+
+#define IMX95_PAD_SD2_CMD__USDHC2_CMD                                 0x01A8 0x03AC 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_CMD__NETCMIX_TOP_NETC_TMR_1588_TRIG2            0x01A8 0x03AC 0x0438 0x01 0x01
+#define IMX95_PAD_SD2_CMD__I3C2_PUR                                   0x01A8 0x03AC 0x0000 0x02 0x00
+#define IMX95_PAD_SD2_CMD__I3C2_PUR_B                                 0x01A8 0x03AC 0x0000 0x03 0x00
+#define IMX95_PAD_SD2_CMD__FLEXIO1_FLEXIO_BIT2                        0x01A8 0x03AC 0x0470 0x04 0x01
+#define IMX95_PAD_SD2_CMD__GPIO3_IO_BIT2                              0x01A8 0x03AC 0x0000 0x05 0x00
+#define IMX95_PAD_SD2_CMD__CCMSRCGPCMIX_TOP_OBSERVE_1                 0x01A8 0x03AC 0x0000 0x06 0x00
+
+#define IMX95_PAD_SD2_DATA0__USDHC2_DATA0                             0x01AC 0x03B0 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_DATA0__NETCMIX_TOP_NETC_TMR_1588_PP2            0x01AC 0x03B0 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_DATA0__CAN2_TX                                  0x01AC 0x03B0 0x0000 0x02 0x00
+#define IMX95_PAD_SD2_DATA0__FLEXIO1_FLEXIO_BIT3                      0x01AC 0x03B0 0x0474 0x04 0x01
+#define IMX95_PAD_SD2_DATA0__GPIO3_IO_BIT3                            0x01AC 0x03B0 0x0000 0x05 0x00
+#define IMX95_PAD_SD2_DATA0__CCMSRCGPCMIX_TOP_OBSERVE_2               0x01AC 0x03B0 0x0000 0x06 0x00
+
+#define IMX95_PAD_SD2_DATA1__USDHC2_DATA1                             0x01B0 0x03B4 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_DATA1__NETCMIX_TOP_NETC_TMR_1588_CLK            0x01B0 0x03B4 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_DATA1__CAN2_RX                                  0x01B0 0x03B4 0x0444 0x02 0x03
+#define IMX95_PAD_SD2_DATA1__FLEXIO1_FLEXIO_BIT4                      0x01B0 0x03B4 0x0478 0x04 0x01
+#define IMX95_PAD_SD2_DATA1__GPIO3_IO_BIT4                            0x01B0 0x03B4 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_DATA2__USDHC2_DATA2                             0x01B4 0x03B8 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_DATA2__NETCMIX_TOP_NETC_TMR_1588_PP3            0x01B4 0x03B8 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_DATA2__NETCMIX_TOP_MQS2_RIGHT                   0x01B4 0x03B8 0x0000 0x02 0x00
+#define IMX95_PAD_SD2_DATA2__FLEXIO1_FLEXIO_BIT5                      0x01B4 0x03B8 0x047C 0x04 0x01
+#define IMX95_PAD_SD2_DATA2__GPIO3_IO_BIT5                            0x01B4 0x03B8 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_DATA3__USDHC2_DATA3                             0x01B8 0x03BC 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_DATA3__LPTMR2_ALT1                              0x01B8 0x03BC 0x0548 0x01 0x01
+#define IMX95_PAD_SD2_DATA3__NETCMIX_TOP_MQS2_LEFT                    0x01B8 0x03BC 0x0000 0x02 0x00
+#define IMX95_PAD_SD2_DATA3__NETCMIX_TOP_NETC_TMR_1588_ALARM1         0x01B8 0x03BC 0x0000 0x03 0x00
+#define IMX95_PAD_SD2_DATA3__FLEXIO1_FLEXIO_BIT6                      0x01B8 0x03BC 0x0480 0x04 0x01
+#define IMX95_PAD_SD2_DATA3__GPIO3_IO_BIT6                            0x01B8 0x03BC 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_RESET_B__USDHC2_RESET_B                         0x01BC 0x03C0 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_RESET_B__LPTMR2_ALT2                            0x01BC 0x03C0 0x054C 0x01 0x01
+#define IMX95_PAD_SD2_RESET_B__NETCMIX_TOP_NETC_TMR_1588_GCLK         0x01BC 0x03C0 0x0000 0x03 0x00
+#define IMX95_PAD_SD2_RESET_B__FLEXIO1_FLEXIO_BIT7                    0x01BC 0x03C0 0x0484 0x04 0x01
+#define IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7                          0x01BC 0x03C0 0x0000 0x05 0x00
+
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL                     0x01C0 0x03C4 0x0000 0x00 0x00
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_I3C1_SCL                       0x01C0 0x03C4 0x0000 0x01 0x00
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPUART1_DCD_B                  0x01C0 0x03C4 0x0000 0x02 0x00
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_TPM2_CH0                       0x01C0 0x03C4 0x0000 0x03 0x00
+#define IMX95_PAD_I2C1_SCL__VPUMIX_TOP_UART_RX                        0x01C0 0x03C4 0x0000 0x04 0x00
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_GPIO1_IO_BIT0                  0x01C0 0x03C4 0x0000 0x05 0x00
+
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA                     0x01C4 0x03C8 0x0000 0x00 0x00
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_I3C1_SDA                       0x01C4 0x03C8 0x0000 0x01 0x00
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPUART1_RIN_B                  0x01C4 0x03C8 0x0000 0x02 0x00
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_TPM2_CH1                       0x01C4 0x03C8 0x0000 0x03 0x00
+#define IMX95_PAD_I2C1_SDA__VPUMIX_TOP_UART_TX                        0x01C4 0x03C8 0x0000 0x04 0x00
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_GPIO1_IO_BIT1                  0x01C4 0x03C8 0x0000 0x05 0x00
+
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL                     0x01C8 0x03CC 0x0000 0x00 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_I3C1_PUR                       0x01C8 0x03CC 0x0000 0x01 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPUART2_DCD_B                  0x01C8 0x03CC 0x0000 0x02 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_TPM2_CH2                       0x01C8 0x03CC 0x0000 0x03 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_SAI1_RX_SYNC                   0x01C8 0x03CC 0x0000 0x04 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_GPIO1_IO_BIT2                  0x01C8 0x03CC 0x0000 0x05 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_I3C1_PUR_B                     0x01C8 0x03CC 0x0000 0x06 0x00
+
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA                     0x01CC 0x03D0 0x0000 0x00 0x00
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPUART2_RIN_B                  0x01CC 0x03D0 0x0000 0x02 0x00
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_TPM2_CH3                       0x01CC 0x03D0 0x0000 0x03 0x00
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_SAI1_RX_BCLK                   0x01CC 0x03D0 0x0000 0x04 0x00
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_GPIO1_IO_BIT3                  0x01CC 0x03D0 0x0000 0x05 0x00
+
+#define IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX                    0x01D0 0x03D4 0x0000 0x00 0x00
+#define IMX95_PAD_UART1_RXD__S400_UART_RX                             0x01D0 0x03D4 0x0000 0x01 0x00
+#define IMX95_PAD_UART1_RXD__AONMIX_TOP_LPSPI2_SIN                    0x01D0 0x03D4 0x0000 0x02 0x00
+#define IMX95_PAD_UART1_RXD__AONMIX_TOP_TPM1_CH0                      0x01D0 0x03D4 0x0000 0x03 0x00
+#define IMX95_PAD_UART1_RXD__AONMIX_TOP_GPIO1_IO_BIT4                 0x01D0 0x03D4 0x0000 0x05 0x00
+
+#define IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX                    0x01D4 0x03D8 0x0000 0x00 0x00
+#define IMX95_PAD_UART1_TXD__S400_UART_TX                             0x01D4 0x03D8 0x0000 0x01 0x00
+#define IMX95_PAD_UART1_TXD__AONMIX_TOP_LPSPI2_PCS0                   0x01D4 0x03D8 0x0000 0x02 0x00
+#define IMX95_PAD_UART1_TXD__AONMIX_TOP_TPM1_CH1                      0x01D4 0x03D8 0x0000 0x03 0x00
+#define IMX95_PAD_UART1_TXD__AONMIX_TOP_GPIO1_IO_BIT5                 0x01D4 0x03D8 0x0000 0x05 0x00
+
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX                    0x01D8 0x03DC 0x0000 0x00 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART1_CTS_B                 0x01D8 0x03DC 0x0000 0x01 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_LPSPI2_SOUT                   0x01D8 0x03DC 0x0000 0x02 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_TPM1_CH2                      0x01D8 0x03DC 0x0000 0x03 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_SAI1_MCLK                     0x01D8 0x03DC 0x041C 0x04 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_GPIO1_IO_BIT6                 0x01D8 0x03DC 0x0000 0x05 0x00
+
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX                    0x01DC 0x03E0 0x0000 0x00 0x00
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART1_RTS_B                 0x01DC 0x03E0 0x0000 0x01 0x00
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_LPSPI2_SCK                    0x01DC 0x03E0 0x0000 0x02 0x00
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_TPM1_CH3                      0x01DC 0x03E0 0x0000 0x03 0x00
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_GPIO1_IO_BIT7                 0x01DC 0x03E0 0x0000 0x05 0x00
+
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK                         0x01E0 0x03E4 0x0000 0x00 0x00
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_MQS1_LEFT                       0x01E0 0x03E4 0x0000 0x01 0x00
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_LPTMR1_ALT1                     0x01E0 0x03E4 0x0000 0x04 0x00
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_GPIO1_IO_BIT8                   0x01E0 0x03E4 0x0000 0x05 0x00
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX                         0x01E0 0x03E4 0x0000 0x06 0x00
+
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0     0x01E4 0x03E8 0x040C 0x00 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_MQS1_RIGHT              0x01E4 0x03E8 0x0000 0x01 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_LPSPI1_PCS1             0x01E4 0x03E8 0x0000 0x02 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_TPM1_EXTCLK             0x01E4 0x03E8 0x0000 0x03 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_LPTMR1_ALT2             0x01E4 0x03E8 0x0000 0x04 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_GPIO1_IO_BIT9           0x01E4 0x03E8 0x0000 0x05 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX                 0x01E4 0x03E8 0x0408 0x06 0x00
+
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_PDM_BIT_STREAM_BIT1     0x01E8 0x03EC 0x0410 0x00 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI                       0x01E8 0x03EC 0x0000 0x01 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_LPSPI2_PCS1             0x01E8 0x03EC 0x0000 0x02 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_TPM2_EXTCLK             0x01E8 0x03EC 0x0000 0x03 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_LPTMR1_ALT3             0x01E8 0x03EC 0x0000 0x04 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10          0x01E8 0x03EC 0x0000 0x05 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_TOP_EXT_CLK1          0x01E8 0x03EC 0x0420 0x06 0x00
+
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC                  0x01EC 0x03F0 0x0000 0x00 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_DATA_BIT1             0x01EC 0x03F0 0x0000 0x01 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_LPSPI1_PCS0                   0x01EC 0x03F0 0x0000 0x02 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_LPUART2_DTR_B                 0x01EC 0x03F0 0x0000 0x03 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_MQS1_LEFT                     0x01EC 0x03F0 0x0000 0x04 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11                0x01EC 0x03F0 0x0000 0x05 0x00
+
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK                   0x01F0 0x03F4 0x0000 0x00 0x00
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPUART2_CTS_B                  0x01F0 0x03F4 0x0000 0x01 0x00
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPSPI1_SIN                     0x01F0 0x03F4 0x0000 0x02 0x00
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPUART1_DSR_B                  0x01F0 0x03F4 0x0000 0x03 0x00
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_CAN1_RX                        0x01F0 0x03F4 0x0408 0x04 0x01
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_GPIO1_IO_BIT12                 0x01F0 0x03F4 0x0000 0x05 0x00
+
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0             0x01F4 0x03F8 0x0000 0x00 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPUART2_RTS_B                 0x01F4 0x03F8 0x0000 0x01 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPSPI1_SCK                    0x01F4 0x03F8 0x0000 0x02 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPUART1_DTR_B                 0x01F4 0x03F8 0x0000 0x03 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_CAN1_TX                       0x01F4 0x03F8 0x0000 0x04 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13                0x01F4 0x03F8 0x0000 0x05 0x00
+
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0             0x01F8 0x03FC 0x0000 0x00 0x00
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_MCLK                     0x01F8 0x03FC 0x041C 0x01 0x01
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_LPSPI1_SOUT                   0x01F8 0x03FC 0x0000 0x02 0x00
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_LPUART2_DSR_B                 0x01F8 0x03FC 0x0000 0x03 0x00
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_MQS1_RIGHT                    0x01F8 0x03FC 0x0000 0x04 0x00
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14                0x01F8 0x03FC 0x0000 0x05 0x00
+
+#define IMX95_PAD_WDOG_ANY__AONMIX_TOP_WDOG_ANY                       0x01FC 0x0400 0x0000 0x00 0x00
+#define IMX95_PAD_WDOG_ANY__AONMIX_TOP_FCCU_EOUT1                     0x01FC 0x0400 0x0000 0x01 0x00
+#define IMX95_PAD_WDOG_ANY__AONMIX_TOP_GPIO1_IO_BIT15                 0x01FC 0x0400 0x0000 0x05 0x00
+#endif /* __DTS_IMX95_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx95-power.h b/arch/arm64/boot/dts/freescale/imx95-power.h
new file mode 100644
index 000000000000..0b7f0bc30e19
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-power.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ *  Copyright 2024 NXP
+ */
+
+#ifndef __IMX95_POWER_H__
+#define __IMX95_POWER_H__
+
+#define IMX95_PD_ANA		0
+#define IMX95_PD_AON		1
+#define IMX95_PD_BBSM		2
+#define IMX95_PD_CAMERA		3
+#define IMX95_PD_CCMSRCGPC	4
+#define IMX95_PD_A55C0		5
+#define IMX95_PD_A55C1		6
+#define IMX95_PD_A55C2		7
+#define IMX95_PD_A55C3		8
+#define IMX95_PD_A55C4		9
+#define IMX95_PD_A55C5		10
+#define IMX95_PD_A55P		11
+#define IMX95_PD_DDR		12
+#define IMX95_PD_DISPLAY	13
+#define IMX95_PD_GPU		14
+#define IMX95_PD_HSIO_TOP	15
+#define IMX95_PD_HSIO_WAON	16
+#define IMX95_PD_M7		17
+#define IMX95_PD_NETC		18
+#define IMX95_PD_NOC		19
+#define IMX95_PD_NPU		20
+#define IMX95_PD_VPU		21
+#define IMX95_PD_WAKEUP		22
+
+#define IMX95_PERF_ELE		0
+#define IMX95_PERF_M33		1
+#define IMX95_PERF_WAKEUP	2
+#define IMX95_PERF_M7		3
+#define IMX95_PERF_DRAM		4
+#define IMX95_PERF_HSIO		5
+#define IMX95_PERF_NPU		6
+#define IMX95_PERF_NOC		7
+#define IMX95_PERF_A55		8
+#define IMX95_PERF_GPU		9
+#define IMX95_PERF_VPU		10
+#define IMX95_PERF_CAM		11
+#define IMX95_PERF_DISP		12
+
+#endif
diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
new file mode 100644
index 000000000000..5b6b2bb80b28
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx95-tqma9596sa.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX95 TQMa95xxSA on MB-SMARC-2";
+	compatible = "tq,imx95-tqma9596sa-mb-smarc-2", "tq,imx95-tqma9596sa", "fsl,imx95";
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &pcf85063;
+		rtc1 = &scmi_bbm;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+	};
+
+	chosen {
+		stdout-path = &lpuart7;
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&tpm3 0 100000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_12v0>;
+		status = "disabled";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&tpm4 0 100000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&expander2 3 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_12v0>;
+		status = "disabled";
+	};
+
+	panel_lvds0: panel-lvds0 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_lvds0>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds0: endpoint {
+				/* TODO: LVDS0 out */
+			};
+		};
+	};
+
+	panel_lvds1: panel-lvds1 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		backlight = <&backlight_lvds1>;
+		power-supply = <&reg_lvds1>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds1: endpoint {
+				/* TODO: LVDS1 out */
+			};
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_lvds0: regulator-lvds0 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds1: regulator-lvds1 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD1_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander2 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		audio-codec = <&tlv320aic3x04>;
+		audio-cpu = <&sai3>;
+	};
+};
+
+&enetc_port0 {
+	status = "okay";
+};
+
+&enetc_port1 {
+	status = "okay";
+};
+
+&expander2 {
+	pcie1-clk-en-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCIE1_CLK_EN";
+	};
+
+	pcie2-clk-en-hog {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCIE2_CLK_EN";
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&scmi_clk IMX95_CLK_SAI3>;
+		clock-names = "mclk";
+		iov-supply = <&reg_1v8>;
+		ldoin-supply = <&reg_3v3>;
+	};
+
+	eeprom2: eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&lpspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	cs-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>, <&gpio2 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* SER0 */
+&lpuart1 {
+	status = "disabled";
+};
+
+/* SER3 */
+&lpuart5 {
+	status = "okay";
+};
+
+/* SER1 */
+&lpuart7 {
+	status = "okay";
+};
+
+/* SER2 */
+&lpuart8 {
+	status = "okay";
+};
+
+/* X44 mPCIe */
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX95_CLK_HSIO>,
+		 <&pcieclk 1>,
+		 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+	reset-gpio = <&expander2 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* X22 PCIe x1 socket */
+&pcie1 {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX95_CLK_HSIO>,
+		 <&pcieclk 0>,
+		 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+	reset-gpio = <&expander2 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&reg_sdvmmc {
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai5 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI5>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+};
+
+/* X4 */
+&usb2 {
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	/* DR not yet supported */
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+
+/* X16 */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_sdvmmc>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
new file mode 100644
index 000000000000..180124cc5bce
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
@@ -0,0 +1,698 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/*
+		 * DRAM base addr, size : 2048 MiB DRAM
+		 * should be corrected by bootloader
+		 */
+		reg = <0 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x28000000>;
+			alloc-ranges = <0 0x80000000 0 0x80000000>;
+			linux,cma-default;
+		};
+
+		vpu_boot: vpu_boot@a0000000 {
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	clk_dp: clk-dp {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Controlled by system manager */
+	reg_sdvmmc: regulator-sdvmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sdvmmc>;
+		regulator-name = "SDIO_PWR_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+};
+
+&enetc_port0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
+
+&enetc_port1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc1>;
+	phy-handle = <&ethphy3>;
+	phy-mode = "rgmii-id";
+};
+
+&netc_timer {
+	status = "okay";
+};
+
+&flexspi1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	pinctrl-1 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		vcc-supply = <&reg_1v8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "GPIO7", "GPIO8",
+			  "", "GPIO9", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "SLEEP", "GPIO5",
+			  "", "", "GPIO6", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	tmp1075: temperature-sensor@4a {
+		compatible = "ti,tmp1075";
+		reg = <0x4a>;
+		vs-supply = <&reg_1v8>;
+	};
+
+	eeprom_smarc: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcf85063>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	m24c64: eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @50) */
+	eeprom@58 {
+		compatible = "atmel,24c64d-wl";
+		reg = <0x58>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @54) */
+	eeprom@5c {
+		compatible = "atmel,24c64d-wl";
+		reg = <0x5c>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	pcieclk: clock-generator@6a {
+		compatible = "renesas,9fgv0441";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+
+	imu@6b {
+		compatible = "st,ism330dhcx";
+		reg = <0x6b>;
+		vdd-supply = <&reg_3v3>;
+		vddio-supply = <&reg_3v3>;
+	};
+
+	/* D23 */
+	expander2: gpio@74 {
+		compatible = "ti,tca9539";
+		reg = <0x74>;
+		vcc-supply = <&reg_1v8>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO4", "LCD0_BLKT_EN", "LCD0_VDD_EN", "LCD1_BLKT_EN",
+				  "LCD1_VDD_EN", "ENET1_RESET#", "ENET2_RESET#", "GBE0_SDP_DIR",
+				  "GBE1_SDP_DIR", "PCIE1_RST#", "PCIE2_RST#", "DP_BRIDGE_EN",
+				  "HUB_RST#", "QSPI_RESET#", "PCIE1_CLK_EN", "PCIE2_CLK_EN";
+	};
+
+	/* D21 */
+	expander1: gpio@75 {
+		compatible = "ti,tca9539";
+		reg = <0x75>;
+		vcc-supply = <&reg_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander1>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		gpio-line-names = "GPIO10", "GPIO11", "GPIO12", "GPIO13",
+				  "CHG_PRSNT#", "CHARGING", "LID", "BATLOW#",
+				  "TEMP_EVENT#", "PGOOD_ARM", "PGOOD_SOC", "PCIE_WAKE#_1V8",
+				  "GPIO0", "GPIO1", "GPIO2", "GPIO3";
+	};
+};
+
+/* I2C_CAM0 */
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	dp_bridge: dp-bridge@f {
+		compatible = "toshiba,tc9595", "toshiba,tc358767";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tc9595>;
+		clock-names = "ref";
+		clocks = <&clk_dp>;
+		reset-gpios = <&expander2 11 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+		toshiba,hpd-pin = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dp_dsi_in: endpoint {
+					/* TODO: DSI out */
+					data-lanes = <1 2 3 4>;
+				};
+			};
+		};
+	};
+};
+
+/* I2C_CAM1 */
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-1 = <&pinctrl_lpi2c4>;
+	status = "okay";
+};
+
+/* I2C_LCD */
+&lpi2c6 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c6>;
+	pinctrl-1 = <&pinctrl_lpi2c6>;
+	status = "okay";
+};
+
+/* SER0 */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+};
+
+/* SER3 */
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart5>;
+};
+
+/* SER1 */
+&lpuart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart7>;
+};
+
+/* SER2 */
+&lpuart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart8>;
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_emdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mdio>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ethphy0>;
+		reset-gpios = <&expander2 5 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <500000>;
+		reset-deassert-us = <50000>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,dp83867-rxctrl-strap-quirk;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	ethphy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ethphy3>;
+		reset-gpios = <&expander2 6 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <500000>;
+		reset-deassert-us = <50000>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,dp83867-rxctrl-strap-quirk;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&scmi_bbm {
+	linux,code = <KEY_POWER>;
+};
+
+&tpm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm3>;
+};
+
+&tpm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm4>;
+};
+
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&expander2 12 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&expander2 12 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog3 {
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13				0x1100>;
+	};
+
+	pinctrl_ethphy3: ethphy3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14				0x1100>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x1100>,
+			   <IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x1100>,
+			   <IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x1100>,
+			   <IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x1100>,
+			   <IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK		0x1100>,
+			   <IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x1100>,
+			   <IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x11e>,
+			   <IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x11e>,
+			   <IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x11e>,
+			   <IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x11e>,
+			   <IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK		0x11e>,
+			   <IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x11e>,
+			   <IMX95_PAD_GPIO_IO23__GPIO2_IO_BIT23				0x51e>;
+	};
+
+	pinctrl_enetc1: enetc1grp {
+		fsl,pins = <IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x1100>,
+			   <IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x1100>,
+			   <IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x1100>,
+			   <IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x1100>,
+			   <IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK		0x1100>,
+			   <IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x1100>,
+			   <IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x11e>,
+			   <IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x11e>,
+			   <IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x11e>,
+			   <IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x11e>,
+			   <IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK		0x11e>,
+			   <IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x11e>,
+			   <IMX95_PAD_GPIO_IO24__GPIO2_IO_BIT24				0x51e>;
+	};
+
+	pinctrl_expander1: expander1grp {
+		fsl,pins = <IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27				0x1100>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX	0x1300>,
+			   <IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX		0x31e>;
+	};
+
+	pinctrl_flexcan3: flexcan3grp {
+		fsl,pins = <IMX95_PAD_CCM_CLKO3__CAN3_TX		0x31e>,
+			   <IMX95_PAD_CCM_CLKO4__CAN3_RX		0x1300>;
+	};
+
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = <IMX95_PAD_SD3_CLK__FLEXSPI1_A_SCLK		0x11e>,
+			   <IMX95_PAD_SD3_CMD__FLEXSPI1_A_SS0_B		0x11e>,
+			   <IMX95_PAD_SD3_DATA0__FLEXSPI1_A_DATA_BIT0	0x11e>,
+			   <IMX95_PAD_SD3_DATA1__FLEXSPI1_A_DATA_BIT1	0x11e>,
+			   <IMX95_PAD_SD3_DATA2__FLEXSPI1_A_DATA_BIT2	0x11e>,
+			   <IMX95_PAD_SD3_DATA3__FLEXSPI1_A_DATA_BIT3	0x11e>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10	0x111e>,
+			   <IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13		0x111e>,
+			   <IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11		0x111e>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18		0x1100>,
+			   <IMX95_PAD_GPIO_IO19__GPIO2_IO_BIT19		0x111e>,
+			   <IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22		0x111e>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL		0x4000191e>,
+			   <IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA		0x4000191e>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO28__LPI2C3_SDA			0x4000191e>,
+			   <IMX95_PAD_GPIO_IO29__LPI2C3_SCL			0x4000191e>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO30__LPI2C4_SDA             0x4000191e>,
+			   <IMX95_PAD_GPIO_IO31__LPI2C4_SCL             0x4000191e>;
+	};
+
+	pinctrl_lpi2c6: lpi2c6grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO02__LPI2C6_SDA             0x4000191e>,
+			   <IMX95_PAD_GPIO_IO03__LPI2C6_SCL             0x4000191e>;
+	};
+
+	pinctrl_lpspi3: lpspi3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO07__GPIO2_IO_BIT7		0x51e>,
+			   <IMX95_PAD_GPIO_IO08__GPIO2_IO_BIT8		0x51e>,
+			   <IMX95_PAD_GPIO_IO09__LPSPI3_SIN		0x51e>,
+			   <IMX95_PAD_GPIO_IO10__LPSPI3_SOUT		0x51e>,
+			   <IMX95_PAD_GPIO_IO11__LPSPI3_SCK		0x51e>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX		0x1300>,
+			   <IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX		0x31e>,
+			   <IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART1_RTS_B	0x1300>,
+			   <IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART1_CTS_B	0x31e>;
+	};
+
+	pinctrl_lpuart5: lpuart5grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO00__LPUART5_TX			0x31e>,
+			   <IMX95_PAD_GPIO_IO01__LPUART5_RX			0x1300>;
+	};
+
+	pinctrl_lpuart7: lpuart7grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO36__LPUART7_TX			0x31e>,
+			   <IMX95_PAD_GPIO_IO37__LPUART7_RX			0x1300>;
+	};
+
+	pinctrl_lpuart8: lpuart8grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO12__LPUART8_TX			0x31e>,
+			   <IMX95_PAD_GPIO_IO13__LPUART8_RX			0x1300>,
+			   <IMX95_PAD_GPIO_IO14__LPUART8_CTS_B			0x31e>,
+			   <IMX95_PAD_GPIO_IO15__LPUART8_RTS_B			0x1300>;
+	};
+
+	pinctrl_mdio: mdiogrp {
+		fsl,pins = <IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC		0x51e>,
+			   <IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO		0x51e>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO27__GPIO2_IO_BIT27			0x1100>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B	0x111e>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B	0x111e>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK			0x51e>,
+			   <IMX95_PAD_GPIO_IO17__SAI3_MCLK			0x51e>,
+			   <IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0		0x1300>,
+			   <IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0		0x51e>,
+			   <IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC			0x51e>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0		0x51e>,
+			   <IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC			0x51e>,
+			   <IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK			0x51e>,
+			   <IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0		0x1300>;
+	};
+
+	pinctrl_sdvmmc: sdvmmcgrp {
+		fsl,pins = <IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7		0x11e>;
+	};
+
+	pinctrl_tc9595: tc9595grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO25__GPIO2_IO_BIT25			0x1500>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO04__TPM3_CH0			0x51e>;
+	};
+
+	pinctrl_tpm4: tpm4grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO05__TPM4_CH0			0x51e>;
+	};
+
+	pinctrl_tpm5: tpm4grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO06__TPM5_CH0			0x51e>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x158e>,
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x138e>,
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x138e>,
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x138e>,
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x138e>,
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x138e>,
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x138e>,
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x138e>,
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x138e>,
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x138e>,
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x158e>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x158e>,
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x138e>,
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x138e>,
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x138e>,
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x138e>,
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x138e>,
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x138e>,
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x138e>,
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x138e>,
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x138e>,
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x158e>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x15fe>,
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x13fe>,
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe>,
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe>,
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe>,
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe>,
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe>,
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe>,
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe>,
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe>,
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x1100>,
+			   <IMX95_PAD_SD2_CLK__USDHC2_CLK			0x51e>,
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD			0x31e>,
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x131e>,
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x131e>,
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x131e>,
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x131e>,
+			   <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x1100>,
+			   <IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e>,
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e>,
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e>,
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e>,
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e>,
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e>,
+			   <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x1100>,
+			   <IMX95_PAD_SD2_CLK__USDHC2_CLK			0x15fe>,
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD			0x13fe>,
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x13fe>,
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x13fe>,
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x13fe>,
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x13fe>,
+			   <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
new file mode 100644
index 000000000000..1292677cbe4e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -0,0 +1,2147 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <dt-bindings/clock/nxp,imx95-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx95-clock.h"
+#include "imx95-pinfunc.h"
+#include "imx95-power.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <10000>;
+				exit-latency-us = <7000>;
+				min-residency-us = <27000>;
+				wakeup-latency-us = <15000>;
+			};
+		};
+
+		A55_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l0>;
+		};
+
+		A55_1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l1>;
+		};
+
+		A55_2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l2>;
+		};
+
+		A55_3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l3>;
+		};
+
+		A55_4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l4>;
+		};
+
+		A55_5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l5>;
+		};
+
+		l2_cache_l0: l2-cache-l0 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l1: l2-cache-l1 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l2: l2-cache-l2 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l3: l2-cache-l3 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l4: l2-cache-l4 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l5: l2-cache-l5 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l3_cache: l3-cache {
+			compatible = "cache";
+			cache-size = <524288>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <3>;
+			cache-unified;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A55_0>;
+				};
+
+				core1 {
+					cpu = <&A55_1>;
+				};
+
+				core2 {
+					cpu = <&A55_2>;
+				};
+
+				core3 {
+					cpu = <&A55_3>;
+				};
+
+				core4 {
+					cpu = <&A55_4>;
+				};
+
+				core5 {
+					cpu = <&A55_5>;
+				};
+			};
+		};
+	};
+
+	dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "dummy";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	sai1_mclk: clock-sai-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai1_mclk";
+	};
+
+	sai2_mclk: clock-sai-mclk2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai2_mclk";
+	};
+
+	sai3_mclk: clock-sai-mclk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai3_mclk";
+	};
+
+	sai4_mclk: clock-sai-mclk4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai4_mclk";
+	};
+
+	sai5_mclk: clock-sai-mclk5 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai5_mclk";
+	};
+
+	clk_sys100m: clock-sys100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "clk_sys100m";
+	};
+
+	osc_24m: clock-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	sram1: sram@204c0000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x204c0000 0x0 0x18000>;
+		ranges = <0x0 0x0 0x204c0000 0x18000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi";
+			mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>, <&mu2 5 1>;
+			shmem = <&scmi_buf0>, <&scmi_buf1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			arm,max-rx-timeout-ms = <5000>;
+
+			scmi_devpd: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_sys_power: protocol@12 {
+				reg = <0x12>;
+			};
+
+			scmi_perf: protocol@13 {
+				reg = <0x13>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_sensor: protocol@15 {
+				reg = <0x15>;
+				#thermal-sensor-cells = <1>;
+			};
+
+			scmi_iomuxc: protocol@19 {
+				reg = <0x19>;
+			};
+
+			scmi_lmm: protocol@80 {
+				reg = <0x80>;
+			};
+
+			scmi_bbm: protocol@81 {
+				reg = <0x81>;
+			};
+
+			scmi_cpu: protocol@82 {
+				reg = <0x82>;
+			};
+
+			scmi_misc: protocol@84 {
+				reg = <0x84>;
+			};
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	thermal_zones: thermal-zones {
+		a55-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&scmi_sensor 1>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		ana-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&scmi_sensor 0>;
+			trips {
+				ana_alert: trip0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ana_crit0: trip1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&ana_alert>;
+					cooling-device =
+						<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,no-tick-in-suspend;
+		interrupt-parent = <&gic>;
+	};
+
+	gic: interrupt-controller@48000000 {
+		compatible = "arm,gic-v3";
+		reg = <0 0x48000000 0 0x10000>,
+		      <0 0x48060000 0 0xc0000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		dma-noncoherent;
+		ranges;
+
+		its: msi-controller@48040000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0 0x48040000 0 0x20000>;
+			msi-controller;
+			#msi-cells = <1>;
+			dma-noncoherent;
+		};
+	};
+
+	usbphynop: usbphynop {
+		compatible = "usb-nop-xceiv";
+		clocks = <&scmi_clk IMX95_CLK_HSIO>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		etm0: etm@40840000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x40840000 0x0 0x10000>;
+			arm,primecell-periphid = <0xbb95d>;
+			cpu = <&A55_0>;
+			clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm0_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel0: funnel {
+			/*
+			 * non-configurable funnel don't show up on the AMBA
+			 * bus.  As such no need to add "arm,primecell".
+			 */
+			compatible = "arm,coresight-static-funnel";
+			status = "disabled";
+
+			in-ports {
+				port {
+					ca_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel1: funnel-sys {
+			compatible = "arm,coresight-static-funnel";
+			status = "disabled";
+
+			in-ports {
+				port {
+					hugo_funnel_in_port0: endpoint {
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+			};
+		};
+
+		etf: etf@41030000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x41030000 0x0 0x1000>;
+			clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			in-ports {
+				port {
+					etf_in_port: endpoint {
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out_port: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
+				};
+			};
+		};
+
+		etr: etr@41040000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x41040000 0x0 0x1000>;
+			clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			in-ports {
+				port {
+					etr_in_port: endpoint {
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@42000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x42000000 0x0 0x800000>;
+			ranges = <0x42000000 0x0 0x42000000 0x8000000>,
+				 <0x28000000 0x0 0x28000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			edma2: dma-controller@42000000 {
+				compatible = "fsl,imx95-edma5";
+				reg = <0x42000000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+			};
+
+			edma3: dma-controller@42210000 {
+				compatible = "fsl,imx95-edma5";
+				reg = <0x42210000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+			};
+
+			mu7: mailbox@42430000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x42430000 0x10000>;
+				interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@42490000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x42490000 0x10000>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm3: pwm@424e0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424e0000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm4: pwm@424f0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424f0000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_TPM4>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm5: pwm@42500000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42500000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_TPM5>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm6: pwm@42510000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42510000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_TPM6>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c2: i3c@42520000 {
+				compatible = "nxp,imx95-i3c", "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+					 <&scmi_clk IMX95_CLK_I3C2SLOW>;
+				clock-names = "pclk", "fast_clk";
+				status = "disabled";
+			};
+
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C3>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C4>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi3: spi@42550000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI3>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI4>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart3: serial@42570000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42570000 0x1000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART3>;
+				clock-names = "ipg";
+				dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart4: serial@42580000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42580000 0x1000>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART4>;
+				clock-names = "ipg";
+				dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart5: serial@42590000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42590000 0x1000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART5>;
+				clock-names = "ipg";
+				dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart6: serial@425a0000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x425a0000 0x1000>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART6>;
+				clock-names = "ipg";
+				dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan2: can@425b0000 {
+				compatible = "fsl,imx95-flexcan";
+				reg = <0x425b0000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_CAN2>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_CAN2>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan3: can@42600000 {
+				compatible = "fsl,imx95-flexcan";
+				reg = <0x42600000 0x10000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_CAN3>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_CAN3>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexspi1: spi@425e0000 {
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x425e0000 0x10000>, <0x28000000 0x8000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_FLEXSPI1>,
+					 <&scmi_clk IMX95_CLK_FLEXSPI1>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clocks = <&scmi_clk IMX95_CLK_FLEXSPI1>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <200000000>;
+				status = "disabled";
+			};
+
+			sai3: sai@42650000 {
+				compatible = "fsl,imx95-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+					 <&scmi_clk IMX95_CLK_SAI3>, <&dummy>,
+					 <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai4: sai@42660000 {
+				compatible = "fsl,imx95-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+					 <&scmi_clk IMX95_CLK_SAI4>, <&dummy>,
+					 <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 68 0 FSL_EDMA_RX>, <&edma2 67 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai5: sai@42670000 {
+				compatible = "fsl,imx95-sai";
+				reg = <0x42670000 0x10000>;
+				interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+					 <&scmi_clk IMX95_CLK_SAI5>, <&dummy>,
+					 <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 70 0 FSL_EDMA_RX>, <&edma2 69 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			xcvr: xcvr@42680000 {
+				compatible = "fsl,imx95-xcvr";
+				reg = <0x42680000 0x800>, <0x42680800 0x400>,
+				      <0x42680c00 0x080>, <0x42680e00 0x080>;
+				reg-names = "ram", "regs", "rxfifo", "txfifo";
+				interrupts = /* XCVR IRQ 0 */
+					     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					     /* XCVR IRQ 1 */
+					     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_SPDIF>,
+					 <&dummy>,
+					 <&scmi_clk IMX95_CLK_AUDIOXCVR>;
+				clock-names = "ipg", "phy", "spba", "pll_ipg";
+				dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart7: serial@42690000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42690000 0x1000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART7>;
+				clock-names = "ipg";
+				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart8: serial@426a0000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x426a0000 0x1000>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART8>;
+				clock-names = "ipg";
+				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C5>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C6>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C7>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C8>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi5: spi@426f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI5>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI6>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI7>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI8>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			mu8: mailbox@42730000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x42730000 0x10000>;
+				interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			flexcan4: can@427c0000 {
+				compatible = "fsl,imx95-flexcan";
+				reg = <0x427c0000 0x10000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_CAN4>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_CAN4>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan5: can@427d0000 {
+				compatible = "fsl,imx95-flexcan";
+				reg = <0x427d0000 0x10000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_CAN5>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_CAN5>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+		};
+
+		aips3: bus@42800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0 0x42800000 0 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x42800000 0x0 0x42800000 0x800000>;
+
+			usdhc1: mmc@42850000 {
+				compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42850000 0x10000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX95_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_USDHC1>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <8>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@42860000 {
+				compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42860000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX95_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_USDHC2>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@428b0000 {
+				compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x428b0000 0x10000>;
+				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX95_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_USDHC3>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio2: gpio@43810000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43810000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 4 32>;
+			ngpios = <32>;
+		};
+
+		gpio3: gpio@43820000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43820000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 104 8>, <&scmi_iomuxc 8 74 18>,
+				      <&scmi_iomuxc 26 42 2>, <&scmi_iomuxc 28 0 4>;
+			ngpios = <32>;
+		};
+
+		gpio4: gpio@43840000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43840000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 46 28>, <&scmi_iomuxc 28 44 2>;
+			ngpios = <30>;
+		};
+
+		gpio5: gpio@43850000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43850000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 92 12>, <&scmi_iomuxc 12 36 6>;
+			ngpios = <18>;
+		};
+
+		aips1: bus@44000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x44000000 0x0 0x800000>;
+			ranges = <0x44000000 0x0 0x44000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			edma1: dma-controller@44000000 {
+				compatible = "fsl,imx93-edma3";
+				reg = <0x44000000 0x200000>;
+				#dma-cells = <3>;
+				dma-channels = <31>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "dma";
+			};
+
+			mu1: mailbox@44220000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x44220000 0x10000>;
+				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@44290000 {
+				compatible = "nxp,imx95-sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_TPM2>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c1: i3c@44330000 {
+				compatible = "nxp,imx95-i3c", "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+					 <&scmi_clk IMX95_CLK_I3C1SLOW>;
+				clock-names = "pclk", "fast_clk";
+				status = "disabled";
+			};
+
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C1>,
+					 <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma1 12 0 0>, <&edma1 13 0 FSL_EDMA_RX> ;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C2>,
+					 <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma1 14 0 0>, <&edma1 15 0 FSL_EDMA_RX> ;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI1>,
+					 <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 16 0 FSL_EDMA_RX>, <&edma1 17 0 0> ;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI2>,
+					 <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 18 0 FSL_EDMA_RX>, <&edma1 19 0 0> ;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart1: serial@44380000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44380000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART1>;
+				clock-names = "ipg";
+				dmas = <&edma1 21 0 FSL_EDMA_RX>, <&edma1 20 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart2: serial@44390000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44390000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART2>;
+				clock-names = "ipg";
+				dmas = <&edma1 23 0 FSL_EDMA_RX>, <&edma1 22 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan1: can@443a0000 {
+				compatible = "fsl,imx95-flexcan";
+				reg = <0x443a0000 0x10000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+					 <&scmi_clk IMX95_CLK_CAN1>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_CAN1>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx95-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>, <&dummy>,
+					 <&scmi_clk IMX95_CLK_SAI1>, <&dummy>,
+					 <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 25 0 FSL_EDMA_RX>, <&edma1 24 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx95-micfil", "fsl,imx93-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+					 <&scmi_clk IMX95_CLK_PDM>,
+					 <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+					 <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+					 <&dummy>;
+				clock-names = "ipg_clk", "ipg_clk_app",
+					      "pll8k", "pll11k", "clkext3";
+				dmas = <&edma1 6 0 5>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			adc1: adc@44530000 {
+				compatible = "nxp,imx93-adc";
+				reg = <0x44530000 0x10000>;
+				interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_ADC>;
+				clock-names = "ipg";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			mu2: mailbox@445b0000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x445b0000 0x1000>;
+				ranges;
+				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#mbox-cells = <2>;
+
+				sram0: sram@445b1000 {
+					compatible = "mmio-sram";
+					reg = <0x445b1000 0x400>;
+					ranges = <0x0 0x445b1000 0x400>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scmi_buf0: scmi-sram-section@0 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x0 0x80>;
+					};
+
+					scmi_buf1: scmi-sram-section@80 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x80 0x80>;
+					};
+				};
+
+			};
+
+			mu3: mailbox@445d0000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x445d0000 0x10000>;
+				interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu4: mailbox@445f0000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x445f0000 0x10000>;
+				interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu6: mailbox@44630000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x44630000 0x10000>;
+				interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		mailbox@47300000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		mailbox@47320000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		mailbox@47330000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		mailbox@47340000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47340000 0x0 0x10000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		mailbox@47350000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47350000 0x0 0x10000>;
+			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		/* GPIO1 is under exclusive control of System Manager */
+		gpio1: gpio@47400000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x47400000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_M33>,
+				 <&scmi_clk IMX95_CLK_M33>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 112 16>;
+			ngpios = <16>;
+			status = "disabled";
+		};
+
+		ocotp: efuse@47510000 {
+			compatible = "fsl,imx95-ocotp", "syscon";
+			reg = <0x0 0x47510000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth_mac0: mac-address@0 {
+				reg = <0x0514 0x6>;
+			};
+
+			eth_mac1: mac-address@1 {
+				reg = <0x1514 0x6>;
+			};
+
+			eth_mac2: mac-address@2 {
+				reg = <0x2514 0x6>;
+			};
+		};
+
+		elemu0: mailbox@47520000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47520000 0x0 0x10000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		elemu1: mailbox@47530000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47530000 0x0 0x10000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		elemu2: mailbox@47540000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47540000 0x0 0x10000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		elemu3: mailbox@47550000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47550000 0x0 0x10000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		elemu4: mailbox@47560000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47560000 0x0 0x10000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		elemu5: mailbox@47570000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47570000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		aips4: bus@49000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x49000000 0x0 0x800000>;
+			ranges = <0x49000000 0x0 0x49000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			smmu: iommu@490d0000 {
+				compatible = "arm,smmu-v3";
+				reg = <0x490d0000 0x100000>;
+				interrupts = <GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 334 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 326 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+				#iommu-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		usb3: usb@4c010010 {
+			compatible = "fsl,imx95-dwc3", "fsl,imx8mp-dwc3";
+			reg = <0x0 0x4c010010 0x0 0x04>,
+			      <0x0 0x4c1f0000 0x0 0x20>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_32K>;
+			clock-names = "hsio", "suspend";
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
+			status = "disabled";
+
+			usb3_dwc3: usb@4c100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x4c100000 0x0 0x10000>;
+				clocks = <&scmi_clk IMX95_CLK_HSIO>,
+					 <&scmi_clk IMX95_CLK_24M>,
+					 <&scmi_clk IMX95_CLK_32K>;
+				clock-names = "bus_early", "ref", "suspend";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy>, <&usb3_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
+				iommus = <&smmu 0xe>;
+			};
+		};
+
+		hsio_blk_ctl: syscon@4c0100c0 {
+			compatible = "nxp,imx95-hsio-blk-ctl", "syscon";
+			reg = <0x0 0x4c0100c0 0x0 0x1>;
+			#clock-cells = <1>;
+			clocks = <&clk_sys100m>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+		};
+
+		usb3_phy: phy@4c1f0040 {
+			compatible = "fsl,imx95-usb-phy", "fsl,imx8mp-usb-phy";
+			reg = <0x0 0x4c1f0040 0x0 0x40>,
+			      <0x0 0x4c1fc000 0x0 0x100>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>;
+			clock-names = "phy";
+			#phy-cells = <0>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+
+		usb2: usb@4c200000 {
+			compatible = "fsl,imx95-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x0 0x4c200000 0x0 0x200>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_32K>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			iommus = <&smmu 0xf>;
+			phys = <&usbphynop>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			fsl,usbmisc = <&usbmisc 0>;
+			status = "disabled";
+		};
+
+		usbmisc: usbmisc@4c200200 {
+			compatible = "fsl,imx95-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x0 0x4c200200 0x0 0x200>,
+			      <0x0 0x4c010014 0x0 0x04>;
+			#index-cells = <1>;
+		};
+
+		pcie0: pcie@4c300000 {
+			compatible = "fsl,imx95-pcie";
+			reg = <0 0x4c300000 0 0x10000>,
+			      <0 0x60100000 0 0xfe00000>,
+			      <0 0x4c360000 0 0x10000>,
+			      <0 0x4c340000 0 0x4000>;
+			reg-names = "dbi", "config", "atu", "app";
+			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
+				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			num-viewport = <8>;
+			interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			/* pcie0's Devid(BIT[7:6]) is 0x00, stream id(BIT[5:0]) is 0x10~0x17 */
+			msi-map = <0x0 &its 0x10 0x1>,
+				  <0x100 &its 0x11 0x7>;
+			iommu-map = <0x000 &smmu 0x10 0x1>,
+				    <0x100 &smmu 0x11 0x7>;
+			iommu-map-mask = <0x1ff>;
+			fsl,max-link-speed = <3>;
+			status = "disabled";
+		};
+
+		pcie0_ep: pcie-ep@4c300000 {
+			compatible = "fsl,imx95-pcie-ep";
+			reg = <0 0x4c300000 0 0x10000>,
+			      <0 0x4c360000 0 0x1000>,
+			      <0 0x4c320000 0 0x1000>,
+			      <0 0x4c340000 0 0x4000>,
+			      <0 0x4c370000 0 0x10000>,
+			      <0x9 0 1 0>;
+			reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			msi-map = <0x0 &its 0x98 0x1>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+
+		pcie1: pcie@4c380000 {
+			compatible = "fsl,imx95-pcie";
+			reg = <0 0x4c380000 0 0x10000>,
+			      <8 0x80100000 0 0xfe00000>,
+			      <0 0x4c3e0000 0 0x10000>,
+			      <0 0x4c3c0000 0 0x4000>;
+			reg-names = "dbi", "config", "atu", "app";
+			ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>,
+				 <0x82000000 0 0x10000000 0xa 0x10000000 0 0x10000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			num-viewport = <8>;
+			interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			/* pcie1's Devid(BIT[7:6]) is 0x10, stream id(BIT[5:0]) is 0x18~0x1f */
+			msi-map = <0x0 &its 0x98 0x1>,
+				  <0x100 &its 0x99 0x7>;
+			msi-map-mask = <0x1ff>;
+			/* smmu have not Devid(BIT[7:6]) */
+			iommu-map = <0x000 &smmu 0x18 0x1>,
+				    <0x100 &smmu 0x19 0x7>;
+			iommu-map-mask = <0x1ff>;
+			fsl,max-link-speed = <3>;
+			status = "disabled";
+		};
+
+		pcie1_ep: pcie-ep@4c380000 {
+			compatible = "fsl,imx95-pcie-ep";
+			reg = <0 0x4c380000 0 0x10000>,
+			      <0 0x4c3e0000 0 0x1000>,
+			      <0 0x4c3a0000 0 0x1000>,
+			      <0 0x4c3c0000 0 0x4000>,
+			      <0 0x4c3f0000 0 0x10000>,
+			      <0xa 0 1 0>;
+			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+
+		vpu_blk_ctrl: clock-controller@4c410000 {
+			compatible = "nxp,imx95-vpu-csr", "syscon";
+			reg = <0x0 0x4c410000 0x0 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&scmi_clk IMX95_CLK_VPUAPB>;
+			power-domains = <&scmi_devpd IMX95_PD_VPU>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_VPUAPB>,
+					  <&scmi_clk IMX95_CLK_VPU>,
+					  <&scmi_clk IMX95_CLK_VPUJPEG>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD2>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD0>;
+			assigned-clock-rates = <133333333>, <667000000>, <500000000>;
+		};
+
+		jpegdec: jpegdec@4c500000 {
+			compatible = "nxp,imx95-jpgdec", "nxp,imx8qxp-jpgdec";
+			reg = <0x0 0x4C500000 0x0 0x00050000>;
+			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_VPU>,
+				 <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>;
+			assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>;
+			power-domains = <&scmi_devpd IMX95_PD_VPU>;
+		};
+
+		jpegenc: jpegenc@4c550000 {
+			compatible = "nxp,imx95-jpgenc", "nxp,imx8qxp-jpgenc";
+			reg = <0x0 0x4C550000 0x0 0x00050000>;
+			interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_VPU>,
+				 <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>;
+			assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>;
+			power-domains = <&scmi_devpd IMX95_PD_VPU>;
+		};
+
+		netcmix_blk_ctrl: syscon@4c810000 {
+			compatible = "nxp,imx95-netcmix-blk-ctrl", "syscon";
+			reg = <0x0 0x4c810000 0x0 0x8>;
+			#clock-cells = <1>;
+			clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			assigned-clock-rates = <133333333>;
+			power-domains = <&scmi_devpd IMX95_PD_NETC>;
+			status = "disabled";
+		};
+
+		sai2: sai@4c880000 {
+			compatible = "fsl,imx95-sai";
+			reg = <0x0 0x4c880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>, <&dummy>,
+				 <&scmi_clk IMX95_CLK_SAI2>, <&dummy>,
+				 <&dummy>;
+			clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+			power-domains = <&scmi_devpd IMX95_PD_NETC>;
+			dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		netc_blk_ctrl: system-controller@4cde0000 {
+			compatible = "nxp,imx95-netc-blk-ctrl";
+			reg = <0x0 0x4cde0000 0x0 0x10000>,
+			      <0x0 0x4cdf0000 0x0 0x10000>,
+			      <0x0 0x4c81000c 0x0 0x18>;
+			reg-names = "ierb", "prb", "netcmix";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			power-domains = <&scmi_devpd IMX95_PD_NETC>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_ENET>,
+					  <&scmi_clk IMX95_CLK_ENETREF>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD2>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD0>;
+			assigned-clock-rates = <666666666>, <250000000>;
+			clocks = <&scmi_clk IMX95_CLK_ENET>;
+			clock-names = "ipg";
+			status = "disabled";
+
+			netc_bus0: pcie@4ca00000 {
+				compatible = "pci-host-ecam-generic";
+				reg = <0x0 0x4ca00000 0x0 0x100000>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				bus-range = <0x0 0x0>;
+				msi-map = <0x0 &its 0x60 0x1>,	//ENETC0 PF
+					  <0x10 &its 0x61 0x1>, //ENETC0 VF0
+					  <0x20 &its 0x62 0x1>, //ENETC0 VF1
+					  <0x40 &its 0x63 0x1>, //ENETC1 PF
+					  <0x80 &its 0x64 0x1>, //ENETC2 PF
+					  <0x90 &its 0x65 0x1>, //ENETC2 VF0
+					  <0xa0 &its 0x66 0x1>, //ENETC2 VF1
+					  <0xc0 &its 0x67 0x1>; //NETC Timer
+				iommu-map = <0x0 &smmu 0x20 0x1>,
+					    <0x10 &smmu 0x21 0x1>,
+					    <0x20 &smmu 0x22 0x1>,
+					    <0x40 &smmu 0x23 0x1>,
+					    <0x80 &smmu 0x24 0x1>,
+					    <0x90 &smmu 0x25 0x1>,
+					    <0xa0 &smmu 0x26 0x1>,
+					    <0xc0 &smmu 0x27 0x1>;
+					 /* ENETC0~2 and Timer BAR0 - non-prefetchable memory */
+				ranges = <0x82000000 0x0 0x4cc00000  0x0 0x4cc00000  0x0 0xe0000
+					 /* Timer BAR2 - prefetchable memory */
+					 0xc2000000 0x0 0x4cd00000  0x0 0x4cd00000  0x0 0x10000
+					 /* ENETC0~2: VF0-1 BAR0 - non-prefetchable memory */
+					 0x82000000 0x0 0x4cd20000  0x0 0x4cd20000  0x0 0x60000
+					 /* ENETC0~2: VF0-1 BAR2 - prefetchable memory */
+					 0xc2000000 0x0 0x4cd80000  0x0 0x4cd80000  0x0 0x60000>;
+
+				enetc_port0: ethernet@0,0 {
+					compatible = "pci1131,e101";
+					reg = <0x000000 0 0 0 0>;
+					clocks = <&scmi_clk IMX95_CLK_ENETREF>;
+					clock-names = "ref";
+					status = "disabled";
+				};
+
+				enetc_port1: ethernet@8,0 {
+					compatible = "pci1131,e101";
+					reg = <0x004000 0 0 0 0>;
+					clocks = <&scmi_clk IMX95_CLK_ENETREF>;
+					clock-names = "ref";
+					status = "disabled";
+				};
+
+				enetc_port2: ethernet@10,0 {
+					compatible = "pci1131,e101";
+					reg = <0x008000 0 0 0 0>;
+					status = "disabled";
+				};
+
+				netc_timer: ethernet@18,0 {
+					compatible = "pci1131,ee02";
+					reg = <0x00c000 0 0 0 0>;
+					status = "disabled";
+				};
+			};
+
+			netc_bus1: pcie@4cb00000 {
+				compatible = "pci-host-ecam-generic";
+				reg = <0x0 0x4cb00000 0x0 0x100000>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				bus-range = <0x1 0x1>;
+					 /* EMDIO BAR0 - non-prefetchable memory */
+				ranges = <0x82000000 0x0 0x4cce0000  0x0 0x4cce0000  0x0 0x20000
+					 /* EMDIO BAR2 - prefetchable memory */
+					 0xc2000000 0x0 0x4cd10000  0x0 0x4cd10000  0x0 0x10000>;
+
+				netc_emdio: mdio@0,0 {
+					compatible = "pci1131,ee00";
+					reg = <0x010000 0 0 0 0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+				};
+			};
+		};
+
+		ddr-pmu@4e090dc0 {
+			compatible = "fsl,imx95-ddr-pmu", "fsl,imx93-ddr-pmu";
+			reg = <0x0 0x4e090dc0 0x0 0x200>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index e2bc53b8d39a..79daba930ad6 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -29,6 +29,12 @@
 		stdout-path = &uart3;
 	};
 
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -94,18 +100,11 @@
 
 		port {
 			panel_in_lvds: endpoint {
-				data-lanes = <1 2 3 4>;
 				remote-endpoint = <&lvds_bridge_out>;
 			};
 		};
 	};
 
-	pcie0_refclk: pcie0-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
 	reg_12v: regulator-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "MBA8MX_12V";
@@ -137,9 +136,9 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	sound {
+	sound: sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
 		ssi-controller = <&sai3>;
 		audio-codec = <&tlv320aic3x04>;
 	};
@@ -185,6 +184,8 @@
 			reset-gpios = <&expander2 7 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <500000>;
 			reset-deassert-us = <500>;
+			interrupt-parent = <&expander2>;
+			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
 		};
 	};
 };
@@ -219,7 +220,7 @@
 			line-name = "BOOT_CFG_OE#";
 		};
 
-		rst-usb-hub-hog {
+		rst_usb_hub_hog: rst-usb-hub-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			output-high;
@@ -237,7 +238,6 @@
 };
 
 &i2c2 {
-	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
@@ -258,16 +258,27 @@
 		reg = <0x1f>;
 	};
 
+	/*
+	 * TUSB8041 is at 0x41, but not connected by default
+	 * Note: TUSB8041 only supports 100 kHz!
+	 */
+
 	eeprom3: eeprom@57 {
 		compatible = "nxp,se97b", "atmel,24c02";
 		reg = <0x57>;
 		pagesize = <16>;
 		vcc-supply = <&reg_vcc_3v3>;
 	};
+
+	pcieclk: clk@68 {
+		compatible = "renesas,9fgv0441";
+		reg = <0x68>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
 };
 
 &i2c3 {
-	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	pinctrl-1 = <&pinctrl_i2c3_gpio>;
@@ -306,20 +317,9 @@
 	};
 };
 
-&mipi_dsi {
-	samsung,burst-clock-frequency = <891000000>;
-	samsung,esc-clock-frequency = <20000000>;
-
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mipi_dsi_out: endpoint {
-				data-lanes = <1 2 3 4>;
-				remote-endpoint = <&lvds_bridge_in>;
-			};
-		};
-	};
+&mipi_dsi_out {
+	data-lanes = <1 2 3 4>;
+	remote-endpoint = <&lvds_bridge_in>;
 };
 
 &pwm3 {
diff --git a/arch/arm64/boot/dts/freescale/mba8xx.dtsi b/arch/arm64/boot/dts/freescale/mba8xx.dtsi
new file mode 100644
index 000000000000..c4b5663949ad
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/mba8xx.dtsi
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	adc {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>;
+	};
+
+	aliases {
+		rtc0 = &pcf85063;
+		rtc1 = &rtc;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bl_lvds>;
+		pwms = <&adma_pwm 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	/* Non-controllable PCIe reference clock generator */
+	pcie_refclk: clock-pcie-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&lsio_gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&lsio_gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* TODO LVDS panels */
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie_1v5: regulator-pcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8XX_PCIE_1V5";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_pcie_1v5>;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&lsio_gpio0 30 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1000>;
+		enable-active-high;
+	};
+
+	reg_pcie_3v3: regulator-pcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8XX_PCIE_3V3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_pcie_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3v3_mb: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		audio-codec = <&tlv320aic3x04>;
+		ssi-controller = <&sai1>;
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0>;
+	vref-supply = <&reg_1v8>;
+	#io-channel-cells = <1>;
+	status = "okay";
+};
+
+&adma_pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_admapwm>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio3 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio3>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		};
+
+		ethphy3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy3>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio3 3 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio3>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-x2-pcieb";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&mclkout0_lpcg 0>;
+		clock-names = "mclk";
+		iov-supply = <&reg_1v8>;
+		ldoin-supply = <&reg_3v3>;
+	};
+
+	se97b_1c: temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	at24c02_54: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9538>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_1v8>;
+
+		gpio-line-names = "", "LED_A",
+				  "LED_B", "",
+				  "DSI_EN", "USB_RESET#",
+				  "V_12V_EN", "PCIE_DIS#";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-1 = <&pinctrl_lpi2c2gpio>;
+	scl-gpios = <&lsio_gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&lsio_gpio2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* TODO LDB */
+
+&lpspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&lsio_gpio0 27 GPIO_ACTIVE_LOW>, <&lsio_gpio0 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lpspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi3>;
+	num-cs = <2>;
+	cs-gpios = <&lsio_gpio0 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
+&lsio_gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lsgpio3>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "X4_15",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&pcieb {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_1v5>;
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg 0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	over-current-active-low;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3v3_mb>;
+	no-1-8-v;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adc0: adc0grp {
+		fsl,pins = <IMX8QXP_ADC_IN0_ADMA_ADC_IN0	0x02000060>,
+			   <IMX8QXP_ADC_IN1_ADMA_ADC_IN1	0x02000060>,
+			   <IMX8QXP_ADC_IN2_ADMA_ADC_IN2	0x02000060>,
+			   <IMX8QXP_ADC_IN3_ADMA_ADC_IN3	0x02000060>;
+	};
+
+	pinctrl_admapwm: admapwmgrp {
+		fsl,pins = <IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT	0x00000021>;
+	};
+
+	pinctrl_bl_lvds: bllvdsgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO30	0x00000021>;
+	};
+
+	pinctrl_can0: can0grp {
+		fsl,pins = <IMX8QXP_UART0_RX_ADMA_FLEXCAN0_RX		0x00000021>,
+			   <IMX8QXP_UART0_TX_ADMA_FLEXCAN0_TX		0x00000021>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <IMX8QXP_UART2_RX_ADMA_FLEXCAN1_RX		0x00000021>,
+			   <IMX8QXP_UART2_TX_ADMA_FLEXCAN1_TX		0x00000021>;
+	};
+
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <IMX8QXP_CSI_EN_LSIO_GPIO3_IO02		0x00000040>,
+			   <IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00		0x00000040>;
+	};
+
+	pinctrl_ethphy3: ethphy3grp {
+		fsl,pins = <IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03		0x00000040>,
+			   <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01		0x00000040>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000041>,
+			   <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000041>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000040>;
+	};
+
+	pinctrl_fec2: fec2grp {
+		fsl,pins = <IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL		0x00000040>,
+			   <IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC		0x00000040>,
+			   <IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3		0x00000040>,
+			   <IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC		0x00000040>,
+			   <IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL		0x00000040>,
+			   <IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3		0x00000040>;
+	};
+
+	pinctrl_gpiobuttons: gpiobuttonsgrp {
+		fsl,pins = <IMX8QXP_ADC_IN5_LSIO_GPIO1_IO13	0x00000020>,
+			   <IMX8QXP_ADC_IN4_LSIO_GPIO1_IO14	0x00000020>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_ADMA_I2C2_SCL	0x06000021>,
+			   <IMX8QXP_MIPI_DSI1_GPIO0_01_ADMA_I2C2_SDA	0x06000021>;
+	};
+
+	pinctrl_lpi2c2gpio: lpi2c2gpiogrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31	0x06000021>,
+			   <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00	0x06000021>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <IMX8QXP_UART1_RX_ADMA_UART1_RX	0x06000020>,
+			   <IMX8QXP_UART1_TX_ADMA_UART1_TX	0x06000020>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX	0x06000020>,
+			   <IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX	0x06000020>;
+	};
+
+	pinctrl_lsgpio3: lsgpio3grp {
+		fsl,pins = <IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15	0x00000021>;
+	};
+
+	pinctrl_pca9538: pca9538grp {
+		fsl,pins = <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19	0x00000020>;
+	};
+
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00		0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_CLKREQ_B_HSIO_PCIE0_CLKREQ_B	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02		0x04000041>;
+	};
+
+	pinctrl_reg_pcie_1v5: regpcie1v5grp {
+		fsl,pins = <IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30	0x00000021>;
+	};
+
+	pinctrl_reg_pcie_3v3: regpcie3v3grp {
+		fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31	0x00000021>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_ACM_MCLK_OUT0	0x06000041>,
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_SAI1_TXC		0x06000041>,
+			   <IMX8QXP_FLEXCAN0_TX_ADMA_SAI1_TXFS		0x06000041>,
+			   <IMX8QXP_FLEXCAN1_RX_ADMA_SAI1_TXD		0x06000041>,
+			   <IMX8QXP_FLEXCAN1_TX_ADMA_SAI1_RXD		0x06000041>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <IMX8QXP_SAI0_TXC_ADMA_SPI1_SDI	0x00000041>,
+			   <IMX8QXP_SAI0_TXD_ADMA_SPI1_SDO	0x00000041>,
+			   <IMX8QXP_SAI0_TXFS_ADMA_SPI1_SCK	0x00000041>,
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27	0x00000021>,
+			   <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29	0x00000021>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK	0x00000041>,
+			   <IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI	0x00000041>,
+			   <IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO	0x00000041>,
+			   <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00	0x00000021>;
+	};
+
+	pinctrl_spi3: spi3grp {
+		fsl,pins = <IMX8QXP_SPI3_SCK_ADMA_SPI3_SCK	0x00000041>,
+			   <IMX8QXP_SPI3_SDI_ADMA_SPI3_SDI	0x00000041>,
+			   <IMX8QXP_SPI3_SDO_ADMA_SPI3_SDO	0x00000041>,
+			   <IMX8QXP_SPI3_CS0_LSIO_GPIO0_IO16	0x00000021>,
+			   <IMX8QXP_SPI3_CS1_ADMA_SPI3_CS1	0x00000021>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <IMX8QXP_USB_SS3_TC0_CONN_USB_OTG1_PWR	0x00000021>,
+			   <IMX8QXP_USB_SS3_TC2_CONN_USB_OTG1_OC	0x00000021>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21		0x00000021>,
+			   <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22		0x00000021>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
index dbd2fc3ba790..1b2b20c6126d 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -27,12 +27,13 @@ fman@1a00000 {
 		reg = <0xf0000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
 		pcsphy-handle = <&pcsphy6>;
+		pcs-handle = <&pcsphy6>;
 	};
 
 	mdio@f1000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xf1000 0x1000>;
 
 		pcsphy6: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
index 6fc5d2560057..55d78f6f7c6c 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -27,12 +27,13 @@ fman@1a00000 {
 		reg = <0xf2000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
 		pcsphy-handle = <&pcsphy7>;
+		pcs-handle = <&pcsphy7>;
 	};
 
 	mdio@f3000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xf3000 0x1000>;
 
 		pcsphy7: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
index 4e02276fcf99..18916a860c2e 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -26,12 +26,13 @@ fman@1a00000 {
 		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
 		ptp-timer = <&ptp_timer0>;
 		pcsphy-handle = <&pcsphy0>;
+		pcs-handle = <&pcsphy0>;
 	};
 
 	mdio@e1000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe1000 0x1000>;
 
 		pcsphy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
index 0312fa43fa77..e90af445a293 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -26,12 +26,13 @@ fman@1a00000 {
 		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
 		ptp-timer = <&ptp_timer0>;
 		pcsphy-handle = <&pcsphy1>;
+		pcs-handle = <&pcsphy1>;
 	};
 
 	mdio@e3000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe3000 0x1000>;
 
 		pcsphy1: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
index af2df07971dd..fec93905bc81 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -26,12 +26,13 @@ fman@1a00000 {
 		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
 		ptp-timer = <&ptp_timer0>;
 		pcsphy-handle = <&pcsphy2>;
+		pcs-handle = <&pcsphy2>;
 	};
 
 	mdio@e5000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe5000 0x1000>;
 
 		pcsphy2: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
index 4ac98dc8b227..2aa953faa62b 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -26,12 +26,13 @@ fman@1a00000 {
 		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
 		ptp-timer = <&ptp_timer0>;
 		pcsphy-handle = <&pcsphy3>;
+		pcs-handle = <&pcsphy3>;
 	};
 
 	mdio@e7000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe7000 0x1000>;
 
 		pcsphy3: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
index bd932d8b0160..948e39411415 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -26,12 +26,13 @@ fman@1a00000 {
 		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
 		ptp-timer = <&ptp_timer0>;
 		pcsphy-handle = <&pcsphy4>;
+		pcs-handle = <&pcsphy4>;
 	};
 
 	mdio@e9000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe9000 0x1000>;
 
 		pcsphy4: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
index 7de1c5203f3e..01b78c0463a7 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -31,7 +31,7 @@ fman@1a00000 {
 	mdio@eb000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xeb000 0x1000>;
 
 		pcsphy5: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
index ae1c2abaaf36..b0390b711fef 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -67,14 +67,14 @@ fman0: fman@1a00000 {
 	mdio0: mdio@fc000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xfc000 0x1000>;
 	};
 
 	xmdio0: mdio@fd000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xfd000 0x1000>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index 5ac1cc9ff50e..d167624d1f0c 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -3,7 +3,7 @@
  * NXP S32G2 SoC family
  *
  * Copyright (c) 2021 SUSE LLC
- * Copyright (c) 2017-2021 NXP
+ * Copyright 2017-2021, 2024 NXP
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -14,6 +14,18 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	reserved-memory  {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scmi_buf: shm@d0000000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0xd0000000 0x0 0x80>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -77,6 +89,19 @@
 	};
 
 	firmware {
+		scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0xc20000fe>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			shmem = <&scmi_buf>;
+
+			clks: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+
 		psci {
 			compatible = "arm,psci-1.0";
 			method = "smc";
@@ -89,6 +114,335 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0x80000000>;
 
+		rtc0: rtc@40060000 {
+			compatible = "nxp,s32g2-rtc";
+			reg = <0x40060000 0x1000>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 54>, <&clks 55>;
+			clock-names = "ipg", "source0";
+		};
+
+		pinctrl: pinctrl@4009c240 {
+			compatible = "nxp,s32g2-siul2-pinctrl";
+				/* MSCR0-MSCR101 registers on siul2_0 */
+			reg = <0x4009c240 0x198>,
+				/* MSCR112-MSCR122 registers on siul2_1 */
+			      <0x44010400 0x2c>,
+				/* MSCR144-MSCR190 registers on siul2_1 */
+			      <0x44010480 0xbc>,
+				/* IMCR0-IMCR83 registers on siul2_0 */
+			      <0x4009ca40 0x150>,
+				/* IMCR119-IMCR397 registers on siul2_1 */
+			      <0x44010c1c 0x45c>,
+				/* IMCR430-IMCR495 registers on siul2_1 */
+			      <0x440110f8 0x108>;
+
+			jtag_pins: jtag-pins {
+				jtag-grp0 {
+					pinmux = <0x0>;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <166>;
+				};
+
+				jtag-grp1 {
+					pinmux = <0x11>;
+					slew-rate = <166>;
+				};
+
+				jtag-grp2 {
+					pinmux = <0x40>;
+					input-enable;
+					bias-pull-down;
+					slew-rate = <166>;
+				};
+
+				jtag-grp3 {
+					pinmux = <0x23c0>,
+						 <0x23d0>,
+						 <0x2320>;
+				};
+
+				jtag-grp4 {
+					pinmux = <0x51>;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <166>;
+				};
+			};
+
+			pinctrl_usdhc0: usdhc0grp-pins {
+				usdhc0-grp0 {
+					pinmux = <0x2e1>,
+						 <0x381>;
+					output-enable;
+					bias-pull-down;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp1 {
+					pinmux = <0x2f1>,
+						 <0x301>,
+						 <0x311>,
+						 <0x321>,
+						 <0x331>,
+						 <0x341>,
+						 <0x351>,
+						 <0x361>,
+						 <0x371>;
+					output-enable;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp2 {
+					pinmux = <0x391>;
+					output-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp3 {
+					pinmux = <0x3a0>;
+					input-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp4 {
+					pinmux = <0x2032>,
+						 <0x2042>,
+						 <0x2052>,
+						 <0x2062>,
+						 <0x2072>,
+						 <0x2082>,
+						 <0x2092>,
+						 <0x20a2>,
+						 <0x20b2>,
+						 <0x20c2>;
+				};
+			};
+
+			pinctrl_usdhc0_100mhz: usdhc0-100mhzgrp-pins {
+				usdhc0-100mhz-grp0 {
+					pinmux = <0x2e1>,
+						 <0x381>;
+					output-enable;
+					bias-pull-down;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp1 {
+					pinmux = <0x2f1>,
+						 <0x301>,
+						 <0x311>,
+						 <0x321>,
+						 <0x331>,
+						 <0x341>,
+						 <0x351>,
+						 <0x361>,
+						 <0x371>;
+					output-enable;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp2 {
+					pinmux = <0x391>;
+					output-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp3 {
+					pinmux = <0x3a0>;
+					input-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp4 {
+					pinmux = <0x2032>,
+						 <0x2042>,
+						 <0x2052>,
+						 <0x2062>,
+						 <0x2072>,
+						 <0x2082>,
+						 <0x2092>,
+						 <0x20a2>,
+						 <0x20b2>,
+						 <0x20c2>;
+				};
+			};
+
+			pinctrl_usdhc0_200mhz: usdhc0-200mhzgrp-pins {
+				usdhc0-200mhz-grp0 {
+					pinmux = <0x2e1>,
+						 <0x381>;
+					output-enable;
+					bias-pull-down;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp1 {
+					pinmux = <0x2f1>,
+						 <0x301>,
+						 <0x311>,
+						 <0x321>,
+						 <0x331>,
+						 <0x341>,
+						 <0x351>,
+						 <0x361>,
+						 <0x371>;
+					output-enable;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp2 {
+					pinmux = <0x391>;
+					output-enable;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp3 {
+					pinmux = <0x3a0>;
+					input-enable;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp4 {
+					pinmux = <0x2032>,
+						 <0x2042>,
+						 <0x2052>,
+						 <0x2062>,
+						 <0x2072>,
+						 <0x2082>,
+						 <0x2092>,
+						 <0x20a2>,
+						 <0x20b2>,
+						 <0x20c2>;
+				};
+			};
+		};
+
+		ocotp: nvmem@400a4000 {
+			compatible = "nxp,s32g2-ocotp";
+			reg = <0x400a4000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		swt0: watchdog@40100000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40100000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt1: watchdog@40104000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40104000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt2: watchdog@40108000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40108000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt3: watchdog@4010c000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x4010c000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm0: timer@4011c000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x4011c000 0x3000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm1: timer@40120000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40120000 0x3000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm2: timer@40124000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40124000 0x3000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm3: timer@40128000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40128000 0x3000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		edma0: dma-controller@40144000 {
+			compatible = "nxp,s32g2-edma";
+			reg = <0x40144000 0x24000>,
+			      <0x4012c000 0x3000>,
+			      <0x40130000 0x3000>;
+			#dma-cells = <2>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx-0-15",
+					  "tx-16-31",
+					  "err";
+			clocks = <&clks 63>, <&clks 64>;
+			clock-names = "dmamux0", "dmamux1";
+		};
+
+		can0: can@401b4000 {
+			compatible = "nxp,s32g2-flexcan";
+			reg = <0x401b4000 0xa000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can1: can@401be000 {
+			compatible = "nxp,s32g2-flexcan";
+			reg = <0x401be000 0xa000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
 		uart0: serial@401c8000 {
 			compatible = "nxp,s32g2-linflexuart",
 				     "fsl,s32v234-linflexuart";
@@ -105,6 +459,195 @@
 			status = "disabled";
 		};
 
+		usbmisc: usbmisc@44064200 {
+			#index-cells = <1>;
+			compatible = "nxp,s32g2-usbmisc";
+			reg = <0x44064200 0x200>;
+		};
+
+		usbotg: usb@44064000 {
+			compatible = "nxp,s32g2-usb";
+			reg = <0x44064000 0x200>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, /* OTG Core */
+					 <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; /* OTG Wakeup */
+			clocks = <&clks 94>, <&clks 95>;
+			fsl,usbmisc = <&usbmisc 0>;
+			ahb-burst-config = <0x3>;
+			tx-burst-size-dword = <0x10>;
+			rx-burst-size-dword = <0x10>;
+			phy_type = "ulpi";
+			dr_mode = "host";
+			maximum-speed = "high-speed";
+			status = "disabled";
+		};
+
+		spi0: spi@401d4000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x401d4000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <8>;
+			bus-num = <0>;
+			dmas = <&edma0 0 7>, <&edma0 0 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi1: spi@401d8000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x401d8000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <1>;
+			dmas = <&edma0 0 10>, <&edma0 0 11>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi2: spi@401dc000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x401dc000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <2>;
+			dmas = <&edma0 0 13>, <&edma0 0 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@401e4000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x401e4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c1: i2c@401e8000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x401e8000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c2: i2c@401ec000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x401ec000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		swt4: watchdog@40200000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40200000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt5: watchdog@40204000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40204000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt6: watchdog@40208000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40208000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm4: timer@4021c000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x4021c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm5: timer@40220000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40220000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm6: timer@40224000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40224000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		edma1: dma-controller@40244000 {
+			compatible = "nxp,s32g2-edma";
+			reg = <0x40244000 0x24000>,
+			      <0x4022c000 0x3000>,
+			      <0x40230000 0x3000>;
+			#dma-cells = <2>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx-0-15",
+					  "tx-16-31",
+					  "err";
+			clocks = <&clks 63>, <&clks 64>;
+			clock-names = "dmamux0", "dmamux1";
+		};
+
+		can2: can@402a8000 {
+			compatible = "nxp,s32g2-flexcan";
+			reg = <0x402a8000 0xa000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can3: can@402b2000 {
+			compatible = "nxp,s32g2-flexcan";
+			reg = <0x402b2000 0xa000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
 		uart2: serial@402bc000 {
 			compatible = "nxp,s32g2-linflexuart",
 				     "fsl,s32v234-linflexuart";
@@ -113,6 +656,77 @@
 			status = "disabled";
 		};
 
+		spi3: spi@402c8000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x402c8000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <3>;
+			dmas = <&edma0 1 7>, <&edma0 1 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi4: spi@402cc000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x402cc000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <4>;
+			dmas = <&edma0 1 10>, <&edma0 1 11>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi5: spi@402d0000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x402d0000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <5>;
+			dmas = <&edma0 1 13>, <&edma0 1 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c3: i2c@402d8000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x402d8000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c4: i2c@402dc000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x402dc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		usdhc0: mmc@402f0000 {
+			compatible = "nxp,s32g2-usdhc";
+			reg = <0x402f0000 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 32>, <&clks 31>, <&clks 33>;
+			clock-names = "ipg", "ahb", "per";
+			bus-width = <8>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@50800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x50800000 0x10000>,
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
index 9118d8d2ee01..c4a195dd67bf 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
@@ -1,12 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (c) 2021 SUSE LLC
- * Copyright (c) 2019-2021 NXP
+ * Copyright 2019-2021, 2024 NXP
  */
 
 /dts-v1/;
 
 #include "s32g2.dtsi"
+#include "s32gxxxa-evb.dtsi"
 
 / {
 	model = "NXP S32G2 Evaluation Board (S32G-VNP-EVB)";
@@ -32,3 +33,13 @@
 &uart0 {
 	status = "okay";
 };
+
+&usdhc0 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc0_200mhz>;
+	disable-wp;
+	no-1-8-v;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
index e05ee854cdf5..4f58be68c818 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
@@ -1,12 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (c) 2021 SUSE LLC
- * Copyright (c) 2019-2021 NXP
+ * Copyright 2019-2021, 2024 NXP
  */
 
 /dts-v1/;
 
 #include "s32g2.dtsi"
+#include "s32gxxxa-rdb.dtsi"
 
 / {
 	model = "NXP S32G2 Reference Design Board 2 (S32G-VNP-RDB2)";
@@ -38,3 +39,41 @@
 &uart1 {
 	status = "okay";
 };
+
+&stm0 {
+	status = "okay";
+};
+
+&stm1 {
+	status = "okay";
+};
+
+&stm2 {
+	status = "okay";
+};
+
+&stm3 {
+	status = "okay";
+};
+
+&swt0 {
+	status = "okay";
+};
+
+&usdhc0 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc0_200mhz>;
+	disable-wp;
+	/* Remove no-1-8-v to enable higher speed modes for SD card.
+	 * However, this is not enough to enable HS400 or HS200 modes for eMMC.
+	 * In this case, the position of the resistor R797 must be changed
+	 * from A to B before removing the property.
+	 * If the property is removed without changing the resistor position,
+	 * HS*00 may be enabled, but the interface might be unstable because of
+	 * the wrong VCCQ voltage applied to the eMMC.
+	 */
+	no-1-8-v;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
new file mode 100644
index 000000000000..be3a582ebc1b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
@@ -0,0 +1,898 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2021-2024 NXP
+ *
+ * Authors: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
+ *          Ciprian Costea <ciprianmarian.costea@nxp.com>
+ *          Andra-Teodora Ilie <andra.ilie@nxp.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "nxp,s32g3";
+	interrupt-parent = <&gic>;
+	#address-cells = <0x02>;
+	#size-cells = <0x02>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+	};
+
+	firmware {
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			shmem = <&scmi_shmem>;
+			arm,smc-id = <0xc20000fe>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dfs: protocol@13 {
+				reg = <0x13>;
+				#clock-cells = <1>;
+			};
+
+			clks: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	reserved-memory  {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scmi_shmem: shm@d0000000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0xd0000000 0x0 0x80>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x80000000>;
+
+		rtc0: rtc@40060000 {
+			compatible = "nxp,s32g3-rtc",
+				     "nxp,s32g2-rtc";
+			reg = <0x40060000 0x1000>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 54>, <&clks 55>;
+			clock-names = "ipg", "source0";
+		};
+
+		pinctrl: pinctrl@4009c240 {
+			compatible = "nxp,s32g2-siul2-pinctrl";
+				/* MSCR0-MSCR101 registers on siul2_0 */
+			reg = <0x4009c240 0x198>,
+				/* MSCR112-MSCR122 registers on siul2_1 */
+			      <0x44010400 0x2c>,
+				/* MSCR144-MSCR190 registers on siul2_1 */
+			      <0x44010480 0xbc>,
+				/* IMCR0-IMCR83 registers on siul2_0 */
+			      <0x4009ca40 0x150>,
+				/* IMCR119-IMCR397 registers on siul2_1 */
+			      <0x44010c1c 0x45c>,
+				/* IMCR430-IMCR495 registers on siul2_1 */
+			      <0x440110f8 0x108>;
+
+			jtag_pins: jtag-pins {
+				jtag-grp0 {
+					pinmux = <0x0>;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <166>;
+				};
+
+				jtag-grp1 {
+					pinmux = <0x11>;
+					slew-rate = <166>;
+				};
+
+				jtag-grp2 {
+					pinmux = <0x40>;
+					input-enable;
+					bias-pull-down;
+					slew-rate = <166>;
+				};
+
+				jtag-grp3 {
+					pinmux = <0x23c0>,
+						 <0x23d0>,
+						 <0x2320>;
+				};
+
+				jtag-grp4 {
+					pinmux = <0x51>;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <166>;
+				};
+			};
+
+			pinctrl_usdhc0: usdhc0grp-pins {
+				usdhc0-grp0 {
+					pinmux = <0x2e1>,
+						 <0x381>;
+					output-enable;
+					bias-pull-down;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp1 {
+					pinmux = <0x2f1>,
+						 <0x301>,
+						 <0x311>,
+						 <0x321>,
+						 <0x331>,
+						 <0x341>,
+						 <0x351>,
+						 <0x361>,
+						 <0x371>;
+					output-enable;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp2 {
+					pinmux = <0x391>;
+					output-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp3 {
+					pinmux = <0x3a0>;
+					input-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp4 {
+					pinmux = <0x2032>,
+						 <0x2042>,
+						 <0x2052>,
+						 <0x2062>,
+						 <0x2072>,
+						 <0x2082>,
+						 <0x2092>,
+						 <0x20a2>,
+						 <0x20b2>,
+						 <0x20c2>;
+				};
+			};
+
+			pinctrl_usdhc0_100mhz: usdhc0-100mhzgrp-pins {
+				usdhc0-100mhz-grp0 {
+					pinmux = <0x2e1>,
+						 <0x381>;
+					output-enable;
+					bias-pull-down;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp1 {
+					pinmux = <0x2f1>,
+						 <0x301>,
+						 <0x311>,
+						 <0x321>,
+						 <0x331>,
+						 <0x341>,
+						 <0x351>,
+						 <0x361>,
+						 <0x371>;
+					output-enable;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp2 {
+					pinmux = <0x391>;
+					output-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp3 {
+					pinmux = <0x3a0>;
+					input-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp4 {
+					pinmux = <0x2032>,
+						 <0x2042>,
+						 <0x2052>,
+						 <0x2062>,
+						 <0x2072>,
+						 <0x2082>,
+						 <0x2092>,
+						 <0x20a2>,
+						 <0x20b2>,
+						 <0x20c2>;
+				};
+			};
+
+			pinctrl_usdhc0_200mhz: usdhc0-200mhzgrp-pins {
+				usdhc0-200mhz-grp0 {
+					pinmux = <0x2e1>,
+						 <0x381>;
+					output-enable;
+					bias-pull-down;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp1 {
+					pinmux = <0x2f1>,
+						 <0x301>,
+						 <0x311>,
+						 <0x321>,
+						 <0x331>,
+						 <0x341>,
+						 <0x351>,
+						 <0x361>,
+						 <0x371>;
+					output-enable;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp2 {
+					pinmux = <0x391>;
+					output-enable;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp3 {
+					pinmux = <0x3a0>;
+					input-enable;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp4 {
+					pinmux = <0x2032>,
+						 <0x2042>,
+						 <0x2052>,
+						 <0x2062>,
+						 <0x2072>,
+						 <0x2082>,
+						 <0x2092>,
+						 <0x20a2>,
+						 <0x20b2>,
+						 <0x20c2>;
+				};
+			};
+		};
+
+		ocotp: nvmem@400a4000 {
+			compatible = "nxp,s32g3-ocotp", "nxp,s32g2-ocotp";
+			reg = <0x400a4000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		swt0: watchdog@40100000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40100000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt1: watchdog@40104000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40104000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt2: watchdog@40108000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40108000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt3: watchdog@4010c000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x4010c000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm0: timer@4011c000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x4011c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm1: timer@40120000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40120000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm2: timer@40124000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40124000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm3: timer@40128000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40128000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		edma0: dma-controller@40144000 {
+			compatible = "nxp,s32g3-edma", "nxp,s32g2-edma";
+			reg = <0x40144000 0x24000>,
+			      <0x4012c000 0x3000>,
+			      <0x40130000 0x3000>;
+			#dma-cells = <2>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx-0-15",
+					  "tx-16-31",
+					  "err";
+			clocks = <&clks 63>, <&clks 64>;
+			clock-names = "dmamux0", "dmamux1";
+		};
+
+		can0: can@401b4000 {
+			compatible = "nxp,s32g3-flexcan",
+					   "nxp,s32g2-flexcan";
+			reg = <0x401b4000 0xa000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can1: can@401be000 {
+			compatible = "nxp,s32g3-flexcan",
+					   "nxp,s32g2-flexcan";
+			reg = <0x401be000 0xa000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		uart0: serial@401c8000 {
+			compatible = "nxp,s32g3-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x401c8000 0x3000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		uart1: serial@401cc000 {
+			compatible = "nxp,s32g3-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x401cc000 0x3000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		usbmisc: usbmisc@44064200 {
+			#index-cells = <1>;
+			compatible = "nxp,s32g3-usbmisc";
+			reg = <0x44064200 0x200>;
+		};
+
+                usbotg: usb@44064000 {
+                        compatible = "nxp,s32g3-usb", "nxp,s32g2-usb";
+                        reg = <0x44064000 0x200>;
+                        interrupt-parent = <&gic>;
+                        interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, /* OTG Core */
+                                     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; /* OTG Wakeup */
+                        clocks = <&clks 94>, <&clks 95>;
+                        fsl,usbmisc = <&usbmisc 0>;
+                        ahb-burst-config = <0x3>;
+                        tx-burst-size-dword = <0x10>;
+                        rx-burst-size-dword = <0x10>;
+                        phy_type = "ulpi";
+                        dr_mode = "host";
+                        maximum-speed = "high-speed";
+                        status = "disabled";
+                };
+
+		spi0: spi@401d4000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x401d4000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <8>;
+			bus-num = <0>;
+			dmas = <&edma0 0 7>, <&edma0 0 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi1: spi@401d8000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x401d8000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <1>;
+			dmas = <&edma0 0 10>, <&edma0 0 11>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi2: spi@401dc000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x401dc000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <2>;
+			dmas = <&edma0 0 13>, <&edma0 0 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@401e4000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x401e4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c1: i2c@401e8000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x401e8000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c2: i2c@401ec000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x401ec000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		swt4: watchdog@40200000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40200000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt5: watchdog@40204000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40204000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt6: watchdog@40208000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40208000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt7: watchdog@4020C000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x4020C000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm4: timer@4021c000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x4021c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm5: timer@40220000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40220000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm6: timer@40224000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40224000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		edma1: dma-controller@40244000 {
+			compatible = "nxp,s32g3-edma", "nxp,s32g2-edma";
+			reg = <0x40244000 0x24000>,
+			      <0x4022c000 0x3000>,
+			      <0x40230000 0x3000>;
+			#dma-cells = <2>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx-0-15",
+					  "tx-16-31",
+					  "err";
+			clocks = <&clks 63>, <&clks 64>;
+			clock-names = "dmamux0", "dmamux1";
+		};
+
+		can2: can@402a8000 {
+			compatible = "nxp,s32g3-flexcan",
+					   "nxp,s32g2-flexcan";
+			reg = <0x402a8000 0xa000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can3: can@402b2000 {
+			compatible = "nxp,s32g3-flexcan",
+					   "nxp,s32g2-flexcan";
+			reg = <0x402b2000 0xa000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		uart2: serial@402bc000 {
+			compatible = "nxp,s32g3-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x402bc000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		spi3: spi@402c8000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x402c8000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <3>;
+			dmas = <&edma0 1 7>, <&edma0 1 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi4: spi@402cc000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x402cc000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <4>;
+			dmas = <&edma0 1 10>, <&edma0 1 11>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi5: spi@402d0000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x402d0000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <5>;
+			dmas = <&edma0 1 13>, <&edma0 1 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c3: i2c@402d8000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x402d8000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c4: i2c@402dc000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x402dc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		usdhc0: mmc@402f0000 {
+			compatible = "nxp,s32g3-usdhc",
+				     "nxp,s32g2-usdhc";
+			reg = <0x402f0000 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 32>,
+				 <&clks 31>,
+				 <&clks 33>;
+			clock-names = "ipg", "ahb", "per";
+			status = "disabled";
+		};
+
+		swt8: watchdog@40500000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <40500000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt9: watchdog@40504000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40504000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt10: watchdog@40508000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40508000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt11: watchdog@4050c000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x4050c000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm8: timer@40520000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40520000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm9: timer@40524000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40524000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm10: timer@40528000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40528000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm11: timer@4052c000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x4052c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@50800000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x50800000 0x10000>,
+			      <0x50900000 0x200000>,
+			      <0x50400000 0x2000>,
+			      <0x50410000 0x2000>,
+			      <0x50420000 0x2000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* sec-phys */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* phys */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* virt */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, /* hyp-phys */
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; /* hyp-virt */
+		arm,no-tick-in-suspend;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
new file mode 100644
index 000000000000..e94f70ad82d9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2021-2024 NXP
+ *
+ * NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)
+ */
+
+/dts-v1/;
+
+#include "s32g3.dtsi"
+#include "s32gxxxa-rdb.dtsi"
+
+/ {
+	model = "NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)";
+	compatible = "nxp,s32g399a-rdb3", "nxp,s32g3";
+
+	aliases {
+		mmc0 = &usdhc0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 4GiB RAM */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>,
+		      <0x8 0x80000000 0 0x80000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&stm0 {
+	status = "okay";
+};
+
+&stm1 {
+	status = "okay";
+};
+
+&stm2 {
+	status = "okay";
+};
+
+&stm3 {
+	status = "okay";
+};
+
+&stm4 {
+	status = "okay";
+};
+
+&stm5 {
+	status = "okay";
+};
+
+&stm6 {
+	status = "okay";
+};
+
+&stm8 {
+	status = "okay";
+};
+
+&swt0 {
+	status = "okay";
+};
+
+&i2c4 {
+	current-sensor@40 {
+		compatible = "ti,ina231";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+};
+
+&usdhc0 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc0_200mhz>;
+	bus-width = <8>;
+	disable-wp;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi
new file mode 100644
index 000000000000..f1969cdcef19
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2024 NXP
+ *
+ * Authors: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
+ *          Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
+ *          Larisa Grigore <larisa.grigore@nxp.com>
+ */
+
+&pinctrl {
+	can0_pins: can0-pins {
+		can0-grp0 {
+			pinmux = <0x2c1>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can0-grp1 {
+			pinmux = <0x2b0>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can0-grp2 {
+			pinmux = <0x2012>;
+		};
+	};
+
+	can2_pins: can2-pins {
+		can2-grp0 {
+			pinmux = <0x1b2>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can2-grp1 {
+			pinmux = <0x1c0>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can2-grp2 {
+			pinmux = <0x2782>;
+		};
+	};
+
+	can3_pins: can3-pins {
+		can3-grp0 {
+			pinmux = <0x192>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can3-grp1 {
+			pinmux = <0x1a0>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can3-grp2 {
+			pinmux = <0x2792>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0-grp0 {
+			pinmux = <0x101>, <0x111>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c0-grp1 {
+			pinmux = <0x2352>, <0x2362>;
+		};
+	};
+
+	i2c0_gpio_pins: i2c0-gpio-pins {
+		i2c0-gpio-grp0 {
+			pinmux = <0x100>, <0x110>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c0-gpio-grp1 {
+			pinmux = <0x2350>, <0x2360>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		i2c1-grp0 {
+			pinmux = <0x131>, <0x141>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c1-grp1 {
+			pinmux = <0x2cd2>, <0x2ce2>;
+		};
+	};
+
+	i2c1_gpio_pins: i2c1-gpio-pins {
+		i2c1-gpio-grp0 {
+			pinmux = <0x130>, <0x140>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c1-gpio-grp1 {
+			pinmux = <0x2cd0>, <0x2ce0>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		i2c2-grp0 {
+			pinmux = <0x151>, <0x161>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c2-grp1 {
+			pinmux = <0x2cf2>, <0x2d02>;
+		};
+	};
+
+	i2c2_gpio_pins: i2c2-gpio-pins {
+		i2c2-gpio-grp0 {
+			pinmux = <0x150>, <0x160>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c2-gpio-grp1 {
+			pinmux = <0x2cf0>, <0x2d00>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		i2c4-grp0 {
+			pinmux = <0x211>, <0x222>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c4-grp1 {
+			pinmux = <0x2d43>, <0x2d33>;
+		};
+	};
+
+	i2c4_gpio_pins: i2c4-gpio-pins {
+		i2c4-gpio-grp0 {
+			pinmux = <0x210>, <0x220>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c4-gpio-grp1 {
+			pinmux = <0x2d40>, <0x2d30>;
+		};
+	};
+
+	dspi1_pins: dspi1-pins {
+		dspi1-grp0 {
+			pinmux = <0x72>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi1-grp1 {
+			pinmux = <0x62>;
+			output-enable;
+			slew-rate = <150>;
+		};
+
+		dspi1-grp2 {
+			pinmux = <0x83>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+		};
+
+		dspi1-grp3 {
+			pinmux = <0x5F0>;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi1-grp4 {
+			pinmux = <0x3D92>,
+				 <0x3DA2>,
+				 <0x3DB2>;
+		};
+	};
+
+	dspi5_pins: dspi5-pins {
+		dspi5-grp0 {
+			pinmux = <0x93>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+		};
+
+		dspi5-grp1 {
+			pinmux = <0xA0>;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi5-grp2 {
+			pinmux = <0x3ED2>,
+				 <0x3EE2>,
+				 <0x3EF2>;
+		};
+
+		dspi5-grp3 {
+			pinmux = <0xB3>;
+			output-enable;
+			slew-rate = <150>;
+		};
+
+		dspi5-grp4 {
+			pinmux = <0xC3>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can2_pins>;
+	status = "okay";
+};
+
+&can3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can3_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-1 = <&i2c0_gpio_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-1 = <&i2c1_gpio_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_gpio_pins>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-1 = <&i2c4_gpio_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&dspi1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi5 {
+	pinctrl-0 = <&dspi5_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi b/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi
new file mode 100644
index 000000000000..3bc3335c9248
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2024 NXP
+ *
+ * Authors: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
+ *          Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
+ *          Larisa Grigore <larisa.grigore@nxp.com>
+ */
+
+&pinctrl {
+	can0_pins: can0-pins {
+		can0-grp0 {
+			pinmux = <0x112>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can0-grp1 {
+			pinmux = <0x120>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can0-grp2 {
+			pinmux = <0x2013>;
+		};
+	};
+
+	can1_pins: can1-pins {
+		can1-grp0 {
+			pinmux = <0x132>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can1-grp1 {
+			pinmux = <0x140>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can1-grp2 {
+			pinmux = <0x2772>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0-grp0 {
+			pinmux = <0x1f2>, <0x201>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c0-grp1 {
+			pinmux = <0x2353>, <0x2363>;
+		};
+	};
+
+	i2c0_gpio_pins: i2c0-gpio-pins {
+		i2c0-gpio-grp0 {
+			pinmux = <0x1f0>, <0x200>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c0-gpio-grp1 {
+			pinmux = <0x2350>, <0x2360>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		i2c2-grp0 {
+			pinmux = <0x151>, <0x161>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c2-grp1 {
+			pinmux = <0x2cf2>, <0x2d02>;
+		};
+	};
+
+	i2c2_gpio_pins: i2c2-gpio-pins {
+		i2c2-gpio-grp0 {
+			pinmux = <0x2cf0>, <0x2d00>;
+		};
+
+		i2c2-gpio-grp1 {
+			pinmux = <0x150>, <0x160>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		i2c4-grp0 {
+			pinmux = <0x211>, <0x222>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c4-grp1 {
+			pinmux = <0x2d43>, <0x2d33>;
+		};
+	};
+
+	i2c4_gpio_pins: i2c4-gpio-pins {
+		i2c4-gpio-grp0 {
+			pinmux = <0x210>, <0x220>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c4-gpio-grp1 {
+			pinmux = <0x2d40>, <0x2d30>;
+		};
+	};
+
+	dspi1_pins: dspi1-pins {
+		dspi1-grp0 {
+			pinmux = <0x72>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi1-grp1 {
+			pinmux = <0x62>;
+			output-enable;
+			slew-rate = <150>;
+		};
+
+		dspi1-grp2 {
+			pinmux = <0x83>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+		};
+
+		dspi1-grp3 {
+			pinmux = <0x5F0>;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi1-grp4 {
+			pinmux = <0x3D92>,
+				 <0x3DA2>,
+				 <0x3DB2>;
+		};
+	};
+
+	dspi5_pins: dspi5-pins {
+		dspi5-grp0 {
+			pinmux = <0x93>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+		};
+
+		dspi5-grp1 {
+			pinmux = <0xA0>;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi5-grp2 {
+			pinmux = <0x3ED2>,
+				 <0x3EE2>,
+				 <0x3EF2>;
+		};
+
+		dspi5-grp3 {
+			pinmux = <0xB3>;
+			output-enable;
+			slew-rate = <150>;
+		};
+
+		dspi5-grp4 {
+			pinmux = <0xC3>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-1 = <&i2c0_gpio_pins>;
+	status = "okay";
+
+	pcal6524: gpio-expander@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca85073a: rtc@51 {
+		compatible = "nxp,pca85073a";
+		reg = <0x51>;
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&dspi1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi5 {
+	pinctrl-0 = <&dspi5_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_gpio_pins>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-1 = <&i2c4_gpio_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi
index 42409ec56792..bf608ded5dda 100644
--- a/arch/arm64/boot/dts/freescale/s32v234.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi
@@ -89,7 +89,7 @@
 	};
 
 	gic: interrupt-controller@7d001000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
diff --git a/arch/arm64/boot/dts/freescale/tqma8xx.dtsi b/arch/arm64/boot/dts/freescale/tqma8xx.dtsi
new file mode 100644
index 000000000000..58693b774d4c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqma8xx.dtsi
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * global autoconfigured region for contiguous allocations
+		 * must not exceed memory size and region
+		 */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x20000000>;
+			alloc-ranges = <0 0x96000000 0 0x30000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+/* TQMa8Xx only uses industrial grade, reduce trip points accordingly */
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <100000>;
+};
+/* end of temperature grade adjustments */
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <66000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		vcc-supply = <&reg_1v8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1gpio>;
+	scl-gpios = <&lsio_gpio1 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&lsio_gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	se97: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	at24c02: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	m24c64: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&jpegdec {
+	status = "okay";
+};
+
+&jpegenc {
+	status = "okay";
+};
+
+
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic_thermal: pmic-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&reg_1v8>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&vpu {
+	compatible = "nxp,imx8qxp-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	memory-region = <&encoder_boot>, <&encoder_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8QXP_QSPI0A_DATA0_LSIO_QSPI0A_DATA0	0x0600004d
+			IMX8QXP_QSPI0A_DATA1_LSIO_QSPI0A_DATA1	0x0600004d
+			IMX8QXP_QSPI0A_DATA2_LSIO_QSPI0A_DATA2	0x0600004d
+			IMX8QXP_QSPI0A_DATA3_LSIO_QSPI0A_DATA3	0x0600004d
+			IMX8QXP_QSPI0A_DQS_LSIO_QSPI0A_DQS	0x0600004d
+			IMX8QXP_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B	0x0600004d
+			IMX8QXP_QSPI0A_SCLK_LSIO_QSPI0A_SCLK	0x0600004d
+			IMX8QXP_QSPI0B_SCLK_LSIO_QSPI0B_SCLK	0x0600004d
+			IMX8QXP_QSPI0B_DATA0_LSIO_QSPI0B_DATA0	0x0600004d
+			IMX8QXP_QSPI0B_DATA1_LSIO_QSPI0B_DATA1	0x0600004d
+			IMX8QXP_QSPI0B_DATA2_LSIO_QSPI0B_DATA2	0x0600004d
+			IMX8QXP_QSPI0B_DATA3_LSIO_QSPI0B_DATA3	0x0600004d
+			IMX8QXP_QSPI0B_DQS_LSIO_QSPI0B_DQS	0x0600004d
+			IMX8QXP_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B	0x0600004d
+			IMX8QXP_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B	0x0600004d
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL	0x06000021
+			IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA	0x06000021
+		>;
+	};
+
+	pinctrl_lpi2c1gpio: lpi2c1gpiogrp {
+		fsl,pins = <
+			IMX8QXP_MIPI_DSI0_GPIO0_00_LSIO_GPIO1_IO27	0x06000021
+			IMX8QXP_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO28	0x06000021
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD	0x00000021
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK	0x06000040
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD	0x00000020
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK	0x06000040
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD	0x00000020
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi b/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi
new file mode 100644
index 000000000000..478cc8ede05e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc1;
+		rtc1 = &rtc;
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_lvds0>;
+		/* PWM support still missing */
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&lsio_gpio1 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_lvds1>;
+		/* PWM support still missing */
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	panel_lvds0: panel-lvds0 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT
+		 */
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_lvds0>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds0: endpoint {
+			};
+		};
+	};
+
+	panel_lvds1: panel-lvds1 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT
+		 */
+		backlight = <&backlight_lvds1>;
+		power-supply = <&reg_lvds1>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds1: endpoint {
+			};
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic3x04>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&flexcan2 {
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan3 {
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&i2c0 {
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&mclkout0_lpcg 0>;
+		clock-names = "mclk";
+		iov-supply = <&reg_1v8>;
+		ldoin-supply = <&reg_3v3>;
+	};
+
+	eeprom2: eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&lpspi1 {
+	status = "okay";
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&lpuart3 {
+	status = "okay";
+};
+
+&reg_sdvmmc {
+	off-on-delay-us = <200000>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	over-current-active-low;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_sdvmmc>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi b/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi
new file mode 100644
index 000000000000..2d0a329c2fa5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi
@@ -0,0 +1,768 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+/delete-node/ &encoder_rpc;
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/*
+		 * DRAM base addr, minimal size : 1024 MiB DRAM
+		 * should be corrected by bootloader
+		 */
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_tqma8xxs_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_lvds0: regulator-lvds0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds0>;
+		regulator-name = "LCD0_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio1 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds1: regulator-lvds1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds1>;
+		regulator-name = "LCD1_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sdvmmc: regulator-sdvmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sdvmmc>;
+		regulator-name = "SD1_VMMC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vqmmc: regulator-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * global autoconfigured region for contiguous allocations
+		 * must not exceed memory size and region
+		 */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x20000000>;
+			alloc-ranges = <0 0x96000000 0 0x30000000>;
+			linux,cma-default;
+		};
+
+		decoder_boot: decoder-boot@84000000 {
+			reg = <0 0x84000000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder_boot: encoder-boot@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		m4_reserved: m4@88000000 {
+			no-map;
+			reg = <0 0x88000000 0 0x8000000>;
+			status = "disabled";
+		};
+
+		vdev0vring0: vdev0vring0@90000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90000000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdev0vring1: vdev0vring1@90008000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90008000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdev1vring0: vdev1vring0@90010000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90010000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdev1vring1: vdev1vring1@90018000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90018000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		rsc_table: rsc-table@900ff000 {
+			reg = <0 0x900ff000 0 0x1000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdevbuffer: vdevbuffer@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+			status = "disabled";
+		};
+
+		decoder_rpc: decoder-rpc@92000000 {
+			reg = <0 0x92000000 0 0x100000>;
+			no-map;
+		};
+
+		encoder_rpc: encoder-rpc@92100000 {
+			reg = <0 0x92100000 0 0x700000>;
+			no-map;
+		};
+	};
+
+};
+
+/* TQMa8XxS only uses industrial grade, reduce trip points accordingly */
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <100000>;
+};
+/* end of temperature grade adjustments */
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	mac-address = [ 00 00 00 00 00 00 ];
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio3 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio1>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		ethphy3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio0 24 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio1>;
+			interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	fsl,magic-packet;
+	mac-address = [ 00 00 00 00 00 00 ];
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+};
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <66000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&lsio_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_smarc_fangpio>, <&pinctrl_smarc_mngtpio>;
+
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "LID", "SLEEP", "CHARGING#", "CHGPRSNT#",
+			  "BATLOW#", "", "", "",
+			  "", "SMARC_GPIO6", "SMARC_GPIO5", "",
+			  "PHY3 RST#", "", "", "SPI0_CS0",
+			  "", "SPI0_CS1", "", "";
+};
+
+&lsio_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_smarc_gpio>;
+
+	gpio-line-names = "LCD1_BLKT_EN", "LCD1_VDD_EN", "LCD0_BLKT_EN", "LCD0_VDD_EN",
+			  "SMARC_GPIO0", "SMARC_GPIO1", "SMARC_GPIO2", "",
+			  "SMARC_GPIO3", "SMARC_GPIO8", "SMARC_GPIO7", "SMARC_GPIO10",
+			  "SMARC_GPIO9", "SMARC_GPIO4", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "RTC_INT#", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "PHY0_RST#", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "PCIE_PERST#", "", "PCIE_WAKE#", "USB_OTG1_PWR",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "SDIO_PWR_EN",
+			  "", "SDIO_WP", "SDIO_CD#", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c0>;
+	pinctrl-1 = <&pinctrl_lpi2c0_gpio>;
+	scl-gpios = <&lsio_gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&lsio_gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_tqma8xxs_3v3>;
+	};
+
+	rtc1: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		quartz-load-femtofarads = <7000>;
+		interrupt-parent = <&lsio_gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_tqma8xxs_3v3>;
+	};
+
+	pcieclk: clock-generator@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+};
+
+&lpspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&lsio_gpio0 27 GPIO_ACTIVE_LOW>, <&lsio_gpio0 29 GPIO_ACTIVE_LOW>;
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+};
+
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg 0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic0_thermal: pmic0-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vmmc>;
+	vqmmc-supply = <&reg_vqmmc>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	/* NOTE: CD / WP and VMMC support depends on mainboard */
+};
+
+&vpu {
+	compatible = "nxp,imx8qxp-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	memory-region = <&encoder_boot>, <&encoder_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight_lvds0: backlight-lvds0grp {
+		fsl,pins = <IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02	0x00000021>;
+	};
+
+	pinctrl_backlight_lvds1: backlight-lvds1grp {
+		fsl,pins = <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00	0x00000021>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <IMX8QXP_UART2_TX_ADMA_FLEXCAN1_TX	0x00000021>,
+			   <IMX8QXP_UART2_RX_ADMA_FLEXCAN1_RX	0x00000021>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX	0x00000021>,
+			   <IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX	0x00000021>;
+	};
+
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO30	0x00000040>,
+			   <IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22		0x00000040>;
+	};
+
+	pinctrl_ethphy1: ethphy1grp {
+		fsl,pins = <IMX8QXP_ADC_IN4_LSIO_GPIO1_IO14		0x00000040>,
+			   <IMX8QXP_UART1_CTS_B_LSIO_GPIO0_IO24		0x00000040>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000041>,
+			   <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000041>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000040>;
+	};
+
+	pinctrl_fec2: fec2grp {
+		fsl,pins = <IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL		0x00000040>,
+			   <IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC		0x00000040>,
+			   <IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3		0x00000040>,
+			   <IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC		0x00000040>,
+			   <IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL		0x00000040>,
+			   <IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3		0x00000040>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_QSPI0A_DATA0	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DATA1_LSIO_QSPI0A_DATA1	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DATA2_LSIO_QSPI0A_DATA2	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DATA3_LSIO_QSPI0A_DATA3	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DQS_LSIO_QSPI0A_DQS		0x0000004d>,
+			   <IMX8QXP_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B	0x0000004d>,
+			   <IMX8QXP_QSPI0A_SCLK_LSIO_QSPI0A_SCLK	0x0000004d>,
+			   <IMX8QXP_QSPI0B_SCLK_LSIO_QSPI0B_SCLK	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA0_LSIO_QSPI0B_DATA0	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA1_LSIO_QSPI0B_DATA1	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA2_LSIO_QSPI0B_DATA2	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA3_LSIO_QSPI0B_DATA3	0x0000004d>,
+			   <IMX8QXP_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B	0x0000004d>,
+			   <IMX8QXP_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B	0x0000004d>;
+	};
+
+	pinctrl_smarc_gpio: smarcgpiogrp {
+		fsl,pins = /* SMARC_GPIO0 / CAM0_PWR# */
+			   <IMX8QXP_SPI0_SCK_LSIO_GPIO1_IO04	0x00000021>,
+			   /* SMARC_GPIO1 / CAM1_PWR# */
+			   <IMX8QXP_SPI0_SDI_LSIO_GPIO1_IO05	0x00000021>,
+			   /* SMARC_GPIO2 / CAM0_RST# */
+			   <IMX8QXP_SPI0_SDO_LSIO_GPIO1_IO06	0x00000021>,
+			   /* SMARC_GPIO3 / CAM1_RST# */
+			   <IMX8QXP_SPI0_CS0_LSIO_GPIO1_IO08	0x00000021>,
+			   /* SMARC_GPIO4 / HDA_RST# */
+			   <IMX8QXP_ADC_IN5_LSIO_GPIO1_IO13	0x00000021>,
+			   /* SMARC_GPIO7 */
+			   <IMX8QXP_ADC_IN0_LSIO_GPIO1_IO10	0x00000021>,
+			   /* SMARC_GPIO8 */
+			   <IMX8QXP_ADC_IN1_LSIO_GPIO1_IO09	0x00000021>,
+			   /* SMARC_GPIO9 */
+			   <IMX8QXP_ADC_IN2_LSIO_GPIO1_IO12	0x00000021>,
+			   /* SMARC_GPIO10 */
+			   <IMX8QXP_ADC_IN3_LSIO_GPIO1_IO11	0x00000021>;
+	};
+
+	pinctrl_smarc_fangpio: smarcfangpiogrp {
+		fsl,pins = /* SMARC_GPIO5 */
+			   <IMX8QXP_UART1_RX_LSIO_GPIO0_IO22	0x00000021>,
+			   /* SMARC_GPIO6 */
+			   <IMX8QXP_UART1_TX_LSIO_GPIO0_IO21	0x00000021>;
+	};
+
+	pinctrl_smarc_mngtpio: smarcmngtgpiogrp {
+		fsl,pins = /* SMARC BATLOW# */
+			   <IMX8QXP_SPI3_CS0_LSIO_GPIO0_IO16		0x00000021>,
+			   /* SMARC SLEEP */
+			   <IMX8QXP_SPI3_SCK_LSIO_GPIO0_IO13		0x00000021>,
+			   /* SMARC CHGPRSNT# */
+			   <IMX8QXP_SPI3_SDI_LSIO_GPIO0_IO15		0x00000021>,
+			   /* SMARC CHARGING# */
+			   <IMX8QXP_SPI3_SDO_LSIO_GPIO0_IO14		0x00000021>,
+			   /* SMARC LID */
+			   <IMX8QXP_SPDIF0_EXT_CLK_LSIO_GPIO0_IO12	0x00000021>;
+	};
+
+	pinctrl_lvds0: lbdpanel0grp {
+		fsl,pins = /* LCD PWR */
+			<IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03		0x00000021>;
+	};
+
+	pinctrl_lvds1: lbdpanel1grp {
+		fsl,pins = /* LCD PWR */
+			<IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01		0x00000021>;
+	};
+
+	pinctrl_lpi2c0: lpi2c0grp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL	0x06000021>,
+			   <IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA	0x06000021>;
+	};
+
+	pinctrl_lpi2c0_gpio: lpi2c0gpiogrp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08	0x00000021>,
+			   <IMX8QXP_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07	0x00000021>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <IMX8QXP_UART0_RX_ADMA_UART0_RX		0x06000020>,
+			   <IMX8QXP_UART0_TX_ADMA_UART0_TX		0x06000020>,
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B	0x06000020>,
+			   <IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B	0x06000020>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QXP_SCU_GPIO0_00_ADMA_UART3_RX		0x06000020>,
+			   <IMX8QXP_SCU_GPIO0_01_ADMA_UART3_TX		0x06000020>;
+	};
+
+	pinctrl_i2c0_mipi_lvds0: mipi-lvds0-i2c0grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL	0x06000021>,
+			   <IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA	0x06000021>;
+	};
+
+	pinctrl_i2c0_gpio_mipi_lvds0: mipi-lvds0-i2c0-gpiogrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_LSIO_GPIO1_IO25	0x0000021>,
+			   <IMX8QXP_MIPI_DSI0_I2C0_SDA_LSIO_GPIO1_IO26	0x0000021>;
+	};
+
+	pinctrl_pcieb: pcieagrp {
+		fsl,pins = <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02	0x04000041>;
+	};
+
+	pinctrl_pwm_mipi_lvds0: mipi-lvds0-pwmgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_GPIO0_00_MIPI_DSI0_PWM0_OUT	0x00000021>;
+	};
+
+	pinctrl_pwm_mipi_lvds1: mipi-lvds1-pwmgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_MIPI_DSI1_PWM0_OUT	0x00000021>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00		0x00000021>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1100mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1200mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041>;
+	};
+
+	pinctrl_sdvmmc: sdvmmcgrp {
+		fsl,pins = <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19	0x00000021>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = /* PD + PDRV Low + INOUT - MEK has 0x0600004c */
+			   <IMX8QXP_SAI0_TXC_ADMA_SPI1_SDI		0x06000041>,
+			   <IMX8QXP_SAI0_TXD_ADMA_SPI1_SDO		0x06000041>,
+			   <IMX8QXP_SAI0_TXFS_ADMA_SPI1_SCK		0x06000041>,
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27		0x00000021>,
+			   <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29		0x00000021>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_ACM_MCLK_OUT0	0x06000040>,
+			   <IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC		0x06000040>,
+			   <IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS		0x06000040>,
+			   <IMX8QXP_FLEXCAN1_RX_ADMA_SAI1_TXD		0x06000040>,
+			   <IMX8QXP_FLEXCAN1_TX_ADMA_SAI1_RXD		0x06000040>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <IMX8QXP_USB_SS3_TC0_CONN_USB_OTG1_PWR	0x00000021>,
+			   <IMX8QXP_USB_SS3_TC2_CONN_USB_OTG1_OC	0x00000021>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21		0x00000021>,
+			   <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22		0x00000021>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2100mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2200mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
index 2471bb109e8e..9d44f488c083 100644
--- a/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
+++ b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
@@ -10,23 +10,7 @@
 #include <dt-bindings/net/ti-dp83867.h>
 
 / {
-	sfp1: sfp1 {
-		compatible = "sff,sfp";
-		i2c-bus = <&sfp1_i2c>;
-		mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>;
-		los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>;
-	};
 
-	sfp2: sfp2 {
-		compatible = "sff,sfp";
-		i2c-bus = <&sfp2_i2c>;
-		mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>;
-		los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>;
-	};
 };
 
 &dpmac1 {
diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
index 65b4ed28a3d4..444bbf511596 100644
--- a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
+++ b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
@@ -47,6 +47,26 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp1_i2c>;
+		mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp2_i2c>;
+		mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
 };
 
 &duart0 {
@@ -69,6 +89,7 @@
 		reg = <0x70>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		vdd-supply = <&reg_3v3>;
 
 		i2c@0 {
 			reg = <0x0>;
diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
index 138f8778afde..7da1bfd83cca 100644
--- a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
+++ b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
@@ -8,6 +8,14 @@
  */
 
 / {
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
 	reg_vcc3v3: regulator-vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3V3";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
index 79a55a0fa2f1..4c6a075908d1 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
@@ -17,6 +17,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu0>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -34,6 +35,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu1>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -51,6 +53,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu2>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -68,6 +71,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu3>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -160,6 +164,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu4>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -177,6 +182,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu5>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -194,6 +200,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu6>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -211,6 +218,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu7>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 7e137a884ae5..957a1b41f19b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1161,7 +1161,7 @@
 		};
 
 		usb3_otg_bc: usb3_otg_bc@ff200000 {
-			compatible = "syscon", "simple-mfd";
+			compatible = "hisilicon,hi3660-usb3-otg-bc", "syscon", "simple-mfd";
 			reg = <0x0 0xff200000 0x0 0x1000>;
 
 			usb_phy: usb-phy {
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index ed1b5a7a6067..f6bc001c3832 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -31,6 +31,13 @@
 			device_type = "cpu";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu@1 {
@@ -38,6 +45,13 @@
 			device_type = "cpu";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu@2 {
@@ -45,6 +59,13 @@
 			device_type = "cpu";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu@3 {
@@ -52,13 +73,33 @@
 			device_type = "cpu";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 	};
 
+	L2: l2-cache {
+		compatible = "cache";
+		cache-unified;
+		cache-size = <0x80000>; /* 512 KiB */
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		cache-level = <2>;
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
-		      <0x0 0xf1002000 0x0 0x100>;   /* GICC */
+		      <0x0 0xf1002000 0x0 0x2000>,  /* GICC */
+		      <0x0 0xf1004000 0x0 0x2000>,  /* GICH */
+		      <0x0 0xf1006000 0x0 0x2000>;  /* GICV */
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_HIGH)>;
 		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index f0672ec65b26..2d304efe081d 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -82,7 +82,7 @@
 		};
 	};
 
-	reg_sys_5v: regulator@0 {
+	reg_sys_5v: regulator-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "SYS_5V";
 		regulator-min-microvolt = <5000000>;
@@ -91,7 +91,7 @@
 		regulator-always-on;
 	};
 
-	reg_vdd_3v3: regulator@1 {
+	reg_vdd_3v3: regulator-1 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -101,7 +101,7 @@
 		vin-supply = <&reg_sys_5v>;
 	};
 
-	reg_5v_hub: regulator@2 {
+	reg_5v_hub: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "5V_HUB";
 		regulator-min-microvolt = <5000000>;
@@ -514,6 +514,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			port@0 {
+				reg = <0>;
 				adv7533_in: endpoint {
 					remote-endpoint = <&dsi_out0>;
 				};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index be808bb2544e..f8b56d443850 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -727,8 +727,6 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xf7106000 0x0 0x1000>;
 			interrupts = <0 50 4>;
-			bus-id = <0>;
-			enable-dma = <0>;
 			clocks = <&sys_ctrl HI6220_SPI_CLK>, <&sys_ctrl HI6220_SPI_CLK>;
 			clock-names = "sspclk", "apb_pclk";
 			pinctrl-names = "default";
@@ -852,7 +850,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		tsensor: tsensor@0,f7030700 {
+		tsensor: tsensor@f7030700 {
 			compatible = "hisilicon,tsensor";
 			reg = <0x0 0xf7030700 0x0 0x1000>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
index 970047f2dabd..299c4ab630e8 100644
--- a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -10,10 +10,9 @@
 / {
 	spmi: spmi@fff24000 {
 		compatible = "hisilicon,kirin970-spmi-controller";
+		reg = <0x0 0xfff24000 0x0 0x1000>;
 		#address-cells = <2>;
 		#size-cells = <0>;
-		status = "okay";
-		reg = <0x0 0xfff24000 0x0 0x1000>;
 		hisilicon,spmi-channel = <2>;
 
 		pmic: pmic@0 {
@@ -25,9 +24,6 @@
 			gpios = <&gpio28 0 0>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ldo3: ldo3 { /* HDMI */
 					regulator-name = "ldo3";
 					regulator-min-microvolt = <1500000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
index c4eaebbb448f..b7792d443189 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -54,7 +54,7 @@
 	ranges = <0 0 0x0 0x90000000 0x08000000>,
 		 <1 0 0x0 0x98000000 0x08000000>;
 
-	nor-flash@0,0 {
+	nor-flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "numonyx,js28f00a", "cfi-flash";
@@ -75,7 +75,7 @@
 		};
 	};
 
-	cpld@1,0 {
+	cpld@100000000 {
 		compatible = "hisilicon,hip05-cpld";
 		reg = <1 0x0 0x100>;
 	};
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
index 65ddc0698f82..d0912ca5f237 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -279,6 +279,12 @@
 		};
 	};
 
+	refclk200mhz: refclk200mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -298,12 +304,6 @@
 		#size-cells = <2>;
 		ranges;
 
-		refclk200mhz: refclk200mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-
 		uart0: serial@80300000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x80300000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
index f46c33d10750..3d7285e6700e 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -258,6 +258,48 @@
 		};
 	};
 
+	eth2: ethernet-0 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <0>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth3: ethernet-1 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <1>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth0: ethernet-4 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <4>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth1: ethernet-5 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <5>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	refclk: refclk {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		#clock-cells = <0>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -374,12 +416,6 @@
 			};
 		};
 
-		refclk: refclk {
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-			#clock-cells = <0>;
-		};
-
 		usb_ohci: usb@a7030000 {
 			compatible = "generic-ohci";
 			reg = <0x0 0xa7030000 0x0 0x10000>;
@@ -436,7 +472,7 @@
 			};
 		};
 
-		dsaf0: dsa@c7000000 {
+		dsaf0: dsa@c5000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "hisilicon,hns-dsaf-v2";
@@ -570,42 +606,6 @@
 			};
 		};
 
-		eth0: ethernet-4 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <4>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth1: ethernet-5 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <5>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth2: ethernet-0 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <0>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth3: ethernet-1 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <1>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
 		sas0: sas@c3000000 {
 			compatible = "hisilicon,hip06-sas-v2";
 			reg = <0 0xc3000000 0 0x10000>;
@@ -733,7 +733,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pcie@a0090000 {
+		pcie0: pcie@b0000000 {
 			compatible = "hisilicon,hip06-pcie-ecam";
 			reg = <0 0xb0000000 0 0x2000000>,
 			      <0 0xa0090000 0 0x10000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
index 81d907ef43ed..00a6bfa7478c 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
@@ -1013,6 +1013,42 @@
 		};
 	};
 
+	eth0: ethernet-0 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <4>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth1: ethernet-1 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <5>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth2: ethernet-2 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <0>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth3: ethernet-3 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <1>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -1343,7 +1379,7 @@
 			};
 		};
 
-		dsaf0: dsa@c7000000 {
+		dsaf0: dsa@c5000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "hisilicon,hns-dsaf-v2";
@@ -1483,42 +1519,6 @@
 			};
 		};
 
-		eth0: ethernet@4 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <4>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth1: ethernet@5 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <5>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth2: ethernet@0 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <0>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth3: ethernet@1 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <1>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
 		infiniband@c4000000 {
 			compatible = "hisilicon,hns-roce-v1";
 			reg = <0x0 0xc4000000 0x0 0x100000>;
@@ -1724,7 +1724,7 @@
 			status = "disabled";
 		};
 
-		p0_pcie2_a: pcie@a00a0000 {
+		p0_pcie2_a: pcie@af800000 {
 			compatible = "hisilicon,hip07-pcie-ecam";
 			reg = <0 0xaf800000 0 0x800000>,
 			      <0 0xa00a0000 0 0x10000>;
@@ -1745,7 +1745,7 @@
 					 0x0 0 0 4 &mbigen_pcie2_a 671 4>;
 			status = "disabled";
 		};
-		p0_sec_a: crypto@d2000000 {
+		p0_sec_a: crypto@d0000000 {
 			compatible = "hisilicon,hip07-sec";
 			reg = <0x0 0xd0000000 0x0 0x10000>,
 			      <0x0 0xd2000000 0x0 0x10000>,
@@ -1786,7 +1786,7 @@
 				     <605 1>, <606 4>,
 				     <607 1>, <608 4>;
 		};
-		p0_sec_b: crypto@8,d2000000 {
+		p0_sec_b: crypto@8d0000000 {
 			compatible = "hisilicon,hip07-sec";
 			reg = <0x8 0xd0000000 0x0 0x10000>,
 			      <0x8 0xd2000000 0x0 0x10000>,
@@ -1827,7 +1827,7 @@
 				     <605 1>, <606 4>,
 				     <607 1>, <608 4>;
 		};
-		p1_sec_a: crypto@400,d2000000 {
+		p1_sec_a: crypto@400d0000000 {
 			compatible = "hisilicon,hip07-sec";
 			reg = <0x400 0xd0000000 0x0 0x10000>,
 			      <0x400 0xd2000000 0x0 0x10000>,
@@ -1868,7 +1868,7 @@
 				     <605 1>, <606 4>,
 				     <607 1>, <608 4>;
 		};
-		p1_sec_b: crypto@408,d2000000 {
+		p1_sec_b: crypto@408d0000000 {
 			compatible = "hisilicon,hip07-sec";
 			reg = <0x408 0xd0000000 0x0 0x10000>,
 			      <0x408 0xd2000000 0x0 0x10000>,
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index d39cfb723f5b..33f6d01266b1 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -3,5 +3,6 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
 				socfpga_agilex_socdk.dtb \
 				socfpga_agilex_socdk_nand.dtb \
 				socfpga_agilex5_socdk.dtb \
+				socfpga_agilex5_socdk_nand.dtb \
 				socfpga_n5x_socdk.dtb
 dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/keembay-soc.dtsi b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
index 781761d2942b..ae00e9e54e82 100644
--- a/arch/arm64/boot/dts/intel/keembay-soc.dtsi
+++ b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
@@ -70,7 +70,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index d3adb6a130ae..c1e66db0f4c5 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -60,8 +60,27 @@
 		};
 	};
 
+	firmware {
+		svc {
+			compatible = "intel,agilex-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+
+			fpga_mgr: fpga-mgr {
+				compatible = "intel,agilex-soc-fpga-mgr";
+			};
+		};
+	};
+
+	fpga-region {
+		compatible = "fpga-region";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		fpga-mgr = <&fpga_mgr>;
+	};
+
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
@@ -82,26 +101,32 @@
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
+		interrupt-parent = <&intc>;
 		reg = <0x0 0xfffc1000 0x0 0x1000>,
 		      <0x0 0xfffc2000 0x0 0x2000>,
 		      <0x0 0xfffc4000 0x0 0x2000>,
 		      <0x0 0xfffc6000 0x0 0x2000>;
+		/* VGIC maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	clocks {
 		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
 		};
 
 		cb_intosc_ls_clk: cb-intosc-ls-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
 		};
 
 		f2s_free_clk: f2s-free-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
 		};
 
 		osc1: osc1 {
@@ -130,7 +155,7 @@
 		compatible = "usb-nop-xceiv";
 	};
 
-	soc {
+	soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -138,13 +163,6 @@
 		interrupt-parent = <&intc>;
 		ranges = <0 0 0 0xffffffff>;
 
-		base_fpga_region {
-			#address-cells = <0x2>;
-			#size-cells = <0x2>;
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-
 		clkmgr: clock-controller@ffd10000 {
 			compatible = "intel,agilex-clkmgr";
 			reg = <0xffd10000 0x1000>;
@@ -368,7 +386,7 @@
 			pinctrl-single,function-mask = <0x0000000f>;
 		};
 
-		pinctrl1: pinconf@ffd13100 {
+		pinctrl1: pinctrl@ffd13100 {
 			compatible = "pinctrl-single";
 			#pinctrl-cells = <1>;
 			reg = <0xffd13100 0x20>;
@@ -442,6 +460,8 @@
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			dmas = <&pdma 16>, <&pdma 17>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -456,6 +476,8 @@
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			dmas = <&pdma 20>, <&pdma 21>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -659,17 +681,5 @@
 
 			status = "disabled";
 		};
-
-		firmware {
-			svc {
-				compatible = "intel,agilex-svc";
-				method = "smc";
-				memory-region = <&service_reserved>;
-
-				fpga_mgr: fpga-mgr {
-					compatible = "intel,agilex-soc-fpga-mgr";
-				};
-			};
-		};
 	};
 };
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
index dcdaf7064953..04e99cd7e74b 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -73,7 +73,7 @@
 		ranges;
 		#interrupt-cells = <3>;
 		#address-cells = <2>;
-		#size-cells =<2>;
+		#size-cells = <2>;
 		interrupt-controller;
 		#redistributor-regions = <1>;
 		redistributor-stride = <0x0 0x20000>;
@@ -202,7 +202,7 @@
 			status = "disabled";
 		};
 
-		i3c0: i3c-master@10da0000 {
+		i3c0: i3c@10da0000 {
 			compatible = "snps,dw-i3c-master-1.00a";
 			reg = <0x10da0000 0x1000>;
 			#address-cells = <3>;
@@ -212,7 +212,7 @@
 			status = "disabled";
 		};
 
-		i3c1: i3c-master@10da1000 {
+		i3c1: i3c@10da1000 {
 			compatible = "snps,dw-i3c-master-1.00a";
 			reg = <0x10da1000 0x1000>;
 			#address-cells = <3>;
@@ -222,6 +222,26 @@
 			status = "disabled";
 		};
 
+		gpio0: gpio@10c03200 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x10c03200 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		gpio1: gpio@10c03300 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0x10c03300 0x100>;
@@ -314,8 +334,8 @@
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
-			dmas = <&dmac0 2>, <&dmac0 3>;
-			dma-names ="tx", "rx";
+			dmas = <&dmac0 16>, <&dmac0 17>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 
 		};
@@ -331,6 +351,8 @@
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
+			dmas = <&dmac0 20>, <&dmac0 21>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -464,5 +486,341 @@
 			clocks = <&qspi_clk>;
 			status = "disabled";
 		};
+
+		gmac0: ethernet@10810000 {
+			compatible = "altr,socfpga-stmmac-agilex5",
+				     "snps,dwxgmac-2.10";
+			reg = <0x10810000 0x3500>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr AGILEX5_EMAC0_CLK>,
+				 <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			mac-address = [00 00 00 00 00 00];
+			tx-fifo-depth = <32768>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <64>;
+			snps,axi-config = <&stmmac_axi_emac0_setup>;
+			snps,mtl-rx-config = <&mtl_rx_emac0_setup>;
+			snps,mtl-tx-config = <&mtl_tx_emac0_setup>;
+			snps,pbl = <32>;
+			snps,tso;
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			stmmac_axi_emac0_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <31>;
+				snps,rd_osr_lmt = <31>;
+				snps,blen = <0 0 0 32 16 8 4>;
+			};
+
+			mtl_rx_emac0_setup: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x1>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x2>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x3>;
+				};
+				queue4 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x4>;
+				};
+				queue5 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x5>;
+				};
+				queue6 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x6>;
+				};
+				queue7 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x7>;
+				};
+			};
+
+			mtl_tx_emac0_setup: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x09>;
+					snps,dcb-algorithm;
+				};
+				queue1 {
+					snps,weight = <0x0A>;
+					snps,dcb-algorithm;
+				};
+				queue2 {
+					snps,weight = <0x0B>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue3 {
+					snps,weight = <0x0C>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue4 {
+					snps,weight = <0x0D>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue5 {
+					snps,weight = <0x0E>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue6 {
+					snps,weight = <0x0F>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue7 {
+					snps,weight = <0x10>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		gmac1: ethernet@10820000 {
+			compatible = "altr,socfpga-stmmac-agilex5",
+				     "snps,dwxgmac-2.10";
+			reg = <0x10820000 0x3500>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr AGILEX5_EMAC1_CLK>,
+				 <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			mac-address = [00 00 00 00 00 00];
+			tx-fifo-depth = <32768>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <64>;
+			snps,axi-config = <&stmmac_axi_emac1_setup>;
+			snps,mtl-rx-config = <&mtl_rx_emac1_setup>;
+			snps,mtl-tx-config = <&mtl_tx_emac1_setup>;
+			snps,pbl = <32>;
+			snps,tso;
+			altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			stmmac_axi_emac1_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <31>;
+				snps,rd_osr_lmt = <31>;
+				snps,blen = <0 0 0 32 16 8 4>;
+			};
+
+			mtl_rx_emac1_setup: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x1>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x2>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x3>;
+				};
+				queue4 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x4>;
+				};
+				queue5 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x5>;
+				};
+				queue6 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x6>;
+				};
+				queue7 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x7>;
+				};
+			};
+
+			mtl_tx_emac1_setup: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x09>;
+					snps,dcb-algorithm;
+				};
+				queue1 {
+					snps,weight = <0x0A>;
+					snps,dcb-algorithm;
+				};
+				queue2 {
+					snps,weight = <0x0B>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue3 {
+					snps,weight = <0x0C>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue4 {
+					snps,weight = <0x0D>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue5 {
+					snps,weight = <0x0E>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue6 {
+					snps,weight = <0x0F>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue7 {
+					snps,weight = <0x10>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		gmac2: ethernet@10830000 {
+			compatible = "altr,socfpga-stmmac-agilex5",
+				     "snps,dwxgmac-2.10";
+			reg = <0x10830000 0x3500>;
+			interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr AGILEX5_EMAC2_CLK>,
+				 <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			mac-address = [00 00 00 00 00 00];
+			tx-fifo-depth = <32768>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <64>;
+			snps,axi-config = <&stmmac_axi_emac2_setup>;
+			snps,mtl-rx-config = <&mtl_rx_emac2_setup>;
+			snps,mtl-tx-config = <&mtl_tx_emac2_setup>;
+			snps,pbl = <32>;
+			snps,tso;
+			altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			stmmac_axi_emac2_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <31>;
+				snps,rd_osr_lmt = <31>;
+				snps,blen = <0 0 0 32 16 8 4>;
+			};
+
+			mtl_rx_emac2_setup: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x1>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x2>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x3>;
+				};
+				queue4 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x4>;
+				};
+				queue5 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x5>;
+				};
+				queue6 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x6>;
+				};
+				queue7 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x7>;
+				};
+			};
+
+			mtl_tx_emac2_setup: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x09>;
+					snps,dcb-algorithm;
+				};
+				queue1 {
+					snps,weight = <0x0A>;
+					snps,dcb-algorithm;
+				};
+				queue2 {
+					snps,weight = <0x0B>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue3 {
+					snps,weight = <0x0C>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue4 {
+					snps,weight = <0x0D>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue5 {
+					snps,weight = <0x0E>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue6 {
+					snps,weight = <0x0F>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue7 {
+					snps,weight = <0x10>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
index c533e5a3a610..e9776e1cdc9a 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
@@ -10,11 +10,51 @@
 
 	aliases {
 		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "hps_led0";
+			gpios = <&porta 11 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&emac2_phy0>;
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		emac2_phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
 };
 
 &gpio1 {
@@ -25,6 +65,37 @@
 	clock-frequency = <25000000>;
 };
 
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <2>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x04200000>;
+			};
+
+			root: partition@4200000 {
+				label = "root";
+				reg = <0x04200000 0x0be00000>;
+			};
+		};
+	};
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts
new file mode 100644
index 000000000000..38a582ef86b4
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2025, Altera Corporation
+ */
+#include "socfpga_agilex5.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex5 SoCDK NAND daughter board";
+	compatible = "intel,socfpga-agilex5-socdk-nand", "intel,socfpga-agilex5";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "hps_led0";
+			gpios = <&porta 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led1 {
+			label = "hps_led1";
+			gpios = <&porta 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i3c0 {
+	status = "okay";
+};
+
+&i3c1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		nand-bus-width = <8>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0 0x200000>;
+		};
+		partition@200000 {
+			label = "root";
+			reg = <0x200000 0xffe00000>;
+		};
+	};
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
index 1a32840c74e0..d22de06e9839 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
@@ -26,7 +26,7 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
-	soc {
+	soc@0 {
 		bus@80000000 {
 			compatible = "simple-bus";
 			reg = <0x80000000 0x60000000>,
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index 053690657675..b31cfa6b802d 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -106,15 +106,11 @@
 &qspi {
 	status = "okay";
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <2>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
index 5ddfdff37c25..7952c7f47cc2 100644
--- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
@@ -25,12 +25,11 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
-	soc {
+	soc@0 {
 		sdram_edac: memory-controller@f87f8000 {
 			compatible = "snps,ddrc-3.80a";
 			reg = <0xf87f8000 0x400>;
 			interrupts = <0 175 4>;
-			status = "okay";
 		};
 	};
 };
@@ -84,15 +83,11 @@
 &qspi {
 	status = "okay";
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <2>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm64/boot/dts/lg/lg1312-ref.dts b/arch/arm64/boot/dts/lg/lg1312-ref.dts
index 260a2c5b19e5..cdd10f138098 100644
--- a/arch/arm64/boot/dts/lg/lg1312-ref.dts
+++ b/arch/arm64/boot/dts/lg/lg1312-ref.dts
@@ -22,7 +22,7 @@
 		serial2 = &uart2;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x00000000 0x20000000>;
 	};
diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index 48ec4ebec0a8..e83fdc92621e 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -5,103 +5,12 @@
  * Copyright (C) 2016, LG Electronics
  */
 
-#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
+#include "lg131x.dtsi"
 
+/ {
 	compatible = "lge,lg1312";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
-			next-level-cache = <&L2_0>;
-		};
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		L2_0: l2-cache0 {
-			compatible = "cache";
-			cache-level = <2>;
-			cache-unified;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2", "arm,psci";
-		method = "smc";
-		cpu_suspend = <0x84000001>;
-		cpu_off = <0x84000002>;
-		cpu_on = <0x84000003>;
-	};
-
-	gic: interrupt-controller@c0001000 {
-		#interrupt-cells = <3>;
-		compatible = "arm,gic-400";
-		interrupt-controller;
-		reg = <0x0 0xc0001000 0x1000>,
-		      <0x0 0xc0002000 0x2000>,
-		      <0x0 0xc0004000 0x2000>,
-		      <0x0 0xc0006000 0x2000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>,
-				     <&cpu1>,
-				     <&cpu2>,
-				     <&cpu3>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	clk_bus: clk_bus {
-		#clock-cells = <0>;
-
-		compatible = "fixed-clock";
-		clock-frequency = <198000000>;
-		clock-output-names = "BUSCLK";
-	};
 
 	soc {
 		#address-cells = <2>;
@@ -122,234 +31,4 @@
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
 	};
-
-	amba {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		#interrupt-cells = <3>;
-
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		timers: timer@fd100000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x0 0xfd100000 0x1000>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
-			clock-names = "timer0clk", "timer1clk", "apb_pclk";
-		};
-		wdog: watchdog@fd200000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x0 0xfd200000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>;
-			clock-names = "wdog_clk", "apb_pclk";
-		};
-		uart0: serial@fe000000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe000000 0x1000>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		uart1: serial@fe100000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe100000 0x1000>;
-			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		uart2: serial@fe200000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe200000 0x1000>;
-			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		spi0: spi@fe800000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x0 0xfe800000 0x1000>;
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		spi1: spi@fe900000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x0 0xfe900000 0x1000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		dmac0: dma-controller@c1128000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x0 0xc1128000 0x1000>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-		gpio0: gpio@fd400000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd400000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio1: gpio@fd410000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd410000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio2: gpio@fd420000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd420000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio3: gpio@fd430000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd430000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		gpio4: gpio@fd440000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd440000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio5: gpio@fd450000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd450000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio6: gpio@fd460000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd460000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio7: gpio@fd470000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd470000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio8: gpio@fd480000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd480000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio9: gpio@fd490000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd490000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio10: gpio@fd4a0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4a0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio11: gpio@fd4b0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4b0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		gpio12: gpio@fd4c0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4c0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio13: gpio@fd4d0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4d0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio14: gpio@fd4e0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4e0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio15: gpio@fd4f0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4f0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio16: gpio@fd500000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd500000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio17: gpio@fd510000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd510000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-	};
 };
diff --git a/arch/arm64/boot/dts/lg/lg1313-ref.dts b/arch/arm64/boot/dts/lg/lg1313-ref.dts
index e89ae853788a..6ace977ff4cf 100644
--- a/arch/arm64/boot/dts/lg/lg1313-ref.dts
+++ b/arch/arm64/boot/dts/lg/lg1313-ref.dts
@@ -22,7 +22,7 @@
 		serial2 = &uart2;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x00000000 0x20000000>;
 	};
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index 3869460aa5dc..92fa5694cad1 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -5,103 +5,12 @@
  * Copyright (C) 2016, LG Electronics
  */
 
-#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
+#include "lg131x.dtsi"
 
+/ {
 	compatible = "lge,lg1313";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
-			next-level-cache = <&L2_0>;
-		};
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		L2_0: l2-cache0 {
-			compatible = "cache";
-			cache-level = <2>;
-			cache-unified;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2", "arm,psci";
-		method = "smc";
-		cpu_suspend = <0x84000001>;
-		cpu_off = <0x84000002>;
-		cpu_on = <0x84000003>;
-	};
-
-	gic: interrupt-controller@c0001000 {
-		#interrupt-cells = <3>;
-		compatible = "arm,gic-400";
-		interrupt-controller;
-		reg = <0x0 0xc0001000 0x1000>,
-		      <0x0 0xc0002000 0x2000>,
-		      <0x0 0xc0004000 0x2000>,
-		      <0x0 0xc0006000 0x2000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>,
-				     <&cpu1>,
-				     <&cpu2>,
-				     <&cpu3>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	clk_bus: clk_bus {
-		#clock-cells = <0>;
-
-		compatible = "fixed-clock";
-		clock-frequency = <198000000>;
-		clock-output-names = "BUSCLK";
-	};
 
 	soc {
 		#address-cells = <2>;
@@ -122,234 +31,4 @@
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
 	};
-
-	amba {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		#interrupt-cells = <3>;
-
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		timers: timer@fd100000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x0 0xfd100000 0x1000>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
-			clock-names = "timer0clk", "timer1clk", "apb_pclk";
-		};
-		wdog: watchdog@fd200000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x0 0xfd200000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>;
-			clock-names = "wdog_clk", "apb_pclk";
-		};
-		uart0: serial@fe000000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe000000 0x1000>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		uart1: serial@fe100000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe100000 0x1000>;
-			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		uart2: serial@fe200000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe200000 0x1000>;
-			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		spi0: spi@fe800000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x0 0xfe800000 0x1000>;
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		spi1: spi@fe900000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x0 0xfe900000 0x1000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		dmac0: dma-controller@c1128000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x0 0xc1128000 0x1000>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-		gpio0: gpio@fd400000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd400000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio1: gpio@fd410000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd410000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio2: gpio@fd420000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd420000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio3: gpio@fd430000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd430000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		gpio4: gpio@fd440000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd440000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio5: gpio@fd450000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd450000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio6: gpio@fd460000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd460000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio7: gpio@fd470000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd470000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio8: gpio@fd480000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd480000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio9: gpio@fd490000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd490000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio10: gpio@fd4a0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4a0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio11: gpio@fd4b0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4b0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		gpio12: gpio@fd4c0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4c0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio13: gpio@fd4d0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4d0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio14: gpio@fd4e0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4e0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio15: gpio@fd4f0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4f0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio16: gpio@fd500000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd500000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio17: gpio@fd510000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd510000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-	};
 };
diff --git a/arch/arm64/boot/dts/lg/lg131x.dtsi b/arch/arm64/boot/dts/lg/lg131x.dtsi
new file mode 100644
index 000000000000..4cb1e4510897
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/lg131x.dtsi
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for lg131x SoCs
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	gic: interrupt-controller@c0001000 {
+		#interrupt-cells = <3>;
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		reg = <0x0 0xc0001000 0x1000>,
+		      <0x0 0xc0002000 0x2000>,
+		      <0x0 0xc0004000 0x2000>,
+		      <0x0 0xc0006000 0x2000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clk_bus: clk_bus {
+		#clock-cells = <0>;
+
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "BUSCLK";
+	};
+
+	amba {
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timers: timer@fd100000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xfd100000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		};
+		wdog: watchdog@fd200000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xfd200000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+		uart0: serial@fe000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe000000 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+		uart1: serial@fe100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe100000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+		uart2: serial@fe200000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe200000 0x1000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+		spi0: spi@fe800000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe800000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+		spi1: spi@fe900000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe900000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+		dmac0: dma-controller@c1128000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xc1128000 0x1000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+		gpio0: gpio@fd400000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd400000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio1: gpio@fd410000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd410000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio2: gpio@fd420000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd420000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio3: gpio@fd430000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd430000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio4: gpio@fd440000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd440000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio5: gpio@fd450000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd450000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio6: gpio@fd460000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd460000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio7: gpio@fd470000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd470000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio8: gpio@fd480000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd480000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio9: gpio@fd490000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd490000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio10: gpio@fd4a0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4a0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio11: gpio@fd4b0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4b0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio12: gpio@fd4c0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4c0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio13: gpio@fd4d0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4d0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio14: gpio@fd4e0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4e0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio15: gpio@fd4f0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4f0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio16: gpio@fd500000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd500000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio17: gpio@fd510000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd510000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 79ac09b58a89..a774bc74a0a0 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 # Mvebu SoC Family
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-atlas-v5.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
@@ -26,4 +27,11 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9131-cf-solidwan.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9132-clearfog.dtb
+
+subdir-y	+= mmp
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index b5e042b8e929..4878773883c9 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -68,7 +68,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -77,9 +77,8 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		dma-ranges;
 
-		internal-regs@7f000000 {
+		bus@7f000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -204,6 +203,30 @@
 			};
 		};
 
+		mmc_dma: bus@80500000 {
+				compatible = "simple-bus";
+				ranges;
+				#address-cells = <0x2>;
+				#size-cells = <0x2>;
+				reg = <0x0 0x80500000 0x0 0x100000>;
+				dma-ranges = <0x0 0x0 0x2 0x0 0x0 0x80000000>;
+				dma-coherent;
+
+				sdhci: mmc@805c0000 {
+					compatible = "marvell,ac5-sdhci",
+						     "marvell,armada-ap806-sdhci";
+					reg = <0x0 0x805c0000 0x0 0x1000>;
+					interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&emmc_clock>, <&cnm_clock>;
+					clock-names = "core", "axi";
+					bus-width = <8>;
+					non-removable;
+					mmc-ddr-1_8v;
+					mmc-hs200-1_8v;
+					mmc-hs400-1_8v;
+				};
+		};
+
 		/*
 		 * Dedicated section for devices behind 32bit controllers so we
 		 * can configure specific DMA mapping for them
@@ -299,7 +322,7 @@
 
 		nand: nand-controller@805b0000 {
 			compatible = "marvell,ac5-nand-controller";
-			reg =  <0x0 0x805b0000 0x0 0x00000054>;
+			reg = <0x0 0x805b0000 0x0 0x00000054>;
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
@@ -335,5 +358,11 @@
 			#clock-cells = <0>;
 			clock-frequency = <400000000>;
 		};
+
+		emmc_clock: emmc-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts b/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts
index f0ebdb84eec9..0c973d7a215a 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts
@@ -99,3 +99,7 @@
 		};
 	};
 };
+
+&sdhci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts
new file mode 100644
index 000000000000..2a0b07000089
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * Utilizing the CN913x COM Express CPU module board.
+ * This specific carrier board in this mode of operation (external)
+ * only maintains a PCIe link with the CPU module,
+ * which does not require any special DTS definitions.
+ *
+ * AC5X RD works here in external mode (switch selectable at the back of the
+ * board), and connect via an external cable a kit
+ * which would allow it to use an external CN9131 CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier, only on the
+ * CN9131 COM Express CPU module.
+ * What runs the Linux is the CN9131 on the COM Express CPU module,
+ * And it accesses the switch end-point on the AC5X RD portion of the carrier
+ * via PCIe.
+ */
+
+#include "cn9131-db-comexpress.dtsi"
+#include "ac5x-rd-carrier.dtsi"
+
+/ {
+	model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board with CN9131 CPU module";
+	compatible = "marvell,cn9131-ac5x-carrier", "marvell,rd-ac5x-carrier",
+			"marvell,cn9131-cpu-module", "marvell,cn9131",
+			"marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x2 0x00000000>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
new file mode 100644
index 000000000000..f98629abb58b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * This specific board in external mode (see below) only maintains
+ * a PCIe link with the COM Express CPU module, which does not
+ * require any special DTS definitions.
+ *
+ * AC5X RD can either work as you would expect, as a complete standalone
+ * box using the internal CPU, or you can move the switch on the back of
+ * the box to "external" mode, and connect via an external cable a kit
+ * which would allow it to use an external CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ * This is a development/reference solution, not a full commercial solution,
+ * hence it was designed with the flexibility to be configured in different
+ * modes of operation.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier,
+ * only on the COM Express CPU module.
+ */
+
+/ {
+	model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board";
+	compatible = "marvell,rd-ac5x-carrier";
+
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-371x.dtsi b/arch/arm64/boot/dts/marvell/armada-371x.dtsi
deleted file mode 100644
index dc1182ec9fa1..000000000000
--- a/arch/arm64/boot/dts/marvell/armada-371x.dtsi
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 371x family of SoCs
- * (also named 88F3710)
- *
- * Copyright (C) 2016 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- */
-
-#include "armada-37xx.dtsi"
-
-/ {
-	model = "Marvell Armada 3710 SoC";
-	compatible = "marvell,armada3710", "marvell,armada3700";
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts b/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts
new file mode 100644
index 000000000000..070d10a705bb
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for RIPE Atlas Probe v5
+ * 2025 by Marek Behún <kabel@kernel.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/bus/moxtet.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "RIPE Atlas Probe v5";
+	compatible = "ripe,atlas-v5", "marvell,armada3720",
+		     "marvell,armada3710";
+
+	aliases {
+		ethernet0 = &eth0;
+		mmc0 = &sdhci0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_ACTIVITY;
+			color = <LED_COLOR_ID_RED>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vsdc_reg: vsdc-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vsdc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	firmware {
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&sdhci0 {
+	non-removable;
+	bus-width = <4>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	sd-uhs-sdr104;
+	marvell,xenon-emmc;
+	marvell,xenon-tun-count = <9>;
+	marvell,pad-type = "fixed-1-8v";
+	vqmmc-supply = <&vsdc_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 0cfb38492021..bd4e61d5448e 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -18,7 +18,7 @@
 
 / {
 	model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
-	compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3700";
+	compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
index d6d37a1f6f38..91c2f8b4edfa 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
@@ -25,8 +25,6 @@
 	/* Actual device is MV88E6361 */
 	switch: switch@0 {
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 		status = "disabled";
 
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
index 6715a19c1483..5c4d8f379704 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
@@ -18,7 +18,7 @@
 / {
 	model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
 	compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
-		     "marvell,armada3720", "marvell,armada3700";
+		     "marvell,armada3720", "marvell,armada3710";
 };
 
 &sdhci0 {
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
index f9abef8dcc94..97a180c8dcd9 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -13,7 +13,7 @@
 / {
 	model = "Globalscale Marvell ESPRESSOBin Ultra Board";
 	compatible = "globalscale,espressobin-ultra", "globalscale,espressobin",
-		     "marvell,armada3720", "marvell,armada3700";
+		     "marvell,armada3720", "marvell,armada3710";
 
 	aliases {
 		/* ethernet1 is WAN port */
@@ -114,54 +114,84 @@
 };
 
 &mdio {
+	/* Switch is @3, not @1 */
+	/delete-node/ ethernet-switch@1;
 	extphy: ethernet-phy@1 {
 		reg = <1>;
 
 		reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>;
 	};
-};
 
-&switch0 {
-	reg = <3>;
+	switch0: ethernet-switch@3 {
+		compatible = "marvell,mv88e6085";
+		reg = <3>;
 
-	reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
+		dsa,member = <0 0>;
 
-	ports {
-		switch0port1: port@1 {
-			reg = <1>;
-			label = "lan0";
-			phy-handle = <&switch0phy0>;
-		};
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0port0: ethernet-port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 
-		switch0port2: port@2 {
-			reg = <2>;
-			label = "lan1";
-			phy-handle = <&switch0phy1>;
-		};
+			switch0port1: ethernet-port@1 {
+				reg = <1>;
+				label = "lan0";
+				phy-handle = <&switch0phy0>;
+			};
 
-		switch0port3: port@3 {
-			reg = <3>;
-			label = "lan2";
-			phy-handle = <&switch0phy2>;
-		};
+			switch0port2: ethernet-port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
 
-		switch0port4: port@4 {
-			reg = <4>;
-			label = "lan3";
-			phy-handle = <&switch0phy3>;
-		};
+			switch0port3: ethernet-port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-handle = <&switch0phy2>;
+			};
 
-		switch0port5: port@5 {
-			reg = <5>;
-			label = "wan";
-			phy-handle = <&extphy>;
-			phy-mode = "sgmii";
+			switch0port4: ethernet-port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			switch0port5: ethernet-port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-handle = <&extphy>;
+				phy-mode = "sgmii";
+			};
 		};
-	};
 
-	mdio {
-		switch0phy3: switch0phy3@14 {
-			reg = <0x14>;
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: ethernet-phy@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: ethernet-phy@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: ethernet-phy@13 {
+				reg = <0x13>;
+			};
+			switch0phy3: ethernet-phy@14 {
+				reg = <0x14>;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
index 2a8aa3901a9f..75401eab4d42 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
@@ -19,7 +19,7 @@
 	model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
 	compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
 		     "globalscale,espressobin", "marvell,armada3720",
-		     "marvell,armada3700";
+		     "marvell,armada3710";
 
 	aliases {
 		/* ethernet1 is wan port */
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
index b03af87611a9..48a7f50fb427 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
@@ -18,7 +18,7 @@
 / {
 	model = "Globalscale Marvell ESPRESSOBin Board V7";
 	compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
-		     "marvell,armada3720", "marvell,armada3700";
+		     "marvell,armada3720", "marvell,armada3710";
 
 	aliases {
 		/* ethernet1 is wan port */
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index c5a834b33b77..1542d836c090 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -16,5 +16,5 @@
 
 / {
 	model = "Globalscale Marvell ESPRESSOBin Board";
-	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3700";
+	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
index 49cbdb55b4b3..fed2dcecb323 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -145,19 +145,17 @@
 };
 
 &mdio {
-	switch0: switch0@1 {
+	switch0: ethernet-switch@1 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <1>;
 
 		dsa,member = <0 0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0port0: port@0 {
+			switch0port0: ethernet-port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
@@ -168,19 +166,19 @@
 				};
 			};
 
-			switch0port1: port@1 {
+			switch0port1: ethernet-port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			switch0port2: port@2 {
+			switch0port2: ethernet-port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
 			};
 
-			switch0port3: port@3 {
+			switch0port3: ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;
@@ -192,13 +190,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
index b1b45b4fa9d4..9f4bafeddd82 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -7,7 +7,7 @@
 
 / {
 	model = "GL.iNet GL-MV1000";
-	compatible = "glinet,gl-mv1000", "marvell,armada3720";
+	compatible = "glinet,gl-mv1000", "marvell,armada3720", "marvell,armada3710";
 
 	aliases {
 		led-boot = &led_power;
@@ -41,7 +41,7 @@
 	keys {
 		compatible = "gpio-keys";
 
-		reset {
+		button-reset {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
@@ -57,17 +57,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		vpn {
+		led-vpn {
 			label = "green:vpn";
 			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "green:wan";
 			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
 		};
 
-		led_power: power {
+		led_power: led-power {
 			label = "green:power";
 			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
 			default-state = "on";
@@ -152,31 +152,29 @@
 };
 
 &mdio {
-	switch0: switch0@1 {
+	switch0: ethernet-switch@1 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <1>;
 
 		dsa,member = <0 0>;
 
-		ports: ports {
+		ports: ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
@@ -185,7 +183,7 @@
 				nvmem-cell-names = "mac-address";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;
@@ -199,13 +197,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 9eab2bb22134..f4d73c8b1a6d 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -14,7 +14,7 @@
 / {
 	model = "CZ.NIC Turris Mox Board";
 	compatible = "cznic,turris-mox", "marvell,armada3720",
-		     "marvell,armada3700";
+		     "marvell,armada3710";
 
 	aliases {
 		spi0 = &spi0;
@@ -130,7 +130,7 @@
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 		interrupt-parent = <&gpiosb>;
-		interrupts = <5 0>; /* GPIO2_5 */
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */
 	};
 };
 
@@ -216,8 +216,6 @@
 	assigned-clock-rates = <20000000>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
@@ -304,9 +302,15 @@
 		reg = <1>;
 	};
 
-	/* switch nodes are enabled by U-Boot if modules are present */
+	/*
+	 * NOTE: switch nodes are enabled by U-Boot if modules are present
+	 * DO NOT change this node name (switch0@10) even if it is not following
+	 * conventions! Deployed U-Boot binaries are explicitly looking for
+	 * this node in order to augment the device tree!
+	 * Also do not touch the "ports" or "port@n" nodes. These are also ABI.
+	 */
 	switch0@10 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x10>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -317,35 +321,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -430,8 +434,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch0@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -442,19 +447,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1_topaz: switch0phy1@11 {
+			switch0phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy2_topaz: switch0phy2@12 {
+			switch0phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy3_topaz: switch0phy3@13 {
+			switch0phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy4_topaz: switch0phy4@14 {
+			switch0phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
@@ -497,8 +502,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch1@11 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x11>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -509,35 +515,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1phy1: switch1phy1@1 {
+			switch1phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch1phy2: switch1phy2@2 {
+			switch1phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch1phy3: switch1phy3@3 {
+			switch1phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch1phy4: switch1phy4@4 {
+			switch1phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch1phy5: switch1phy5@5 {
+			switch1phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch1phy6: switch1phy6@6 {
+			switch1phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch1phy7: switch1phy7@7 {
+			switch1phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch1phy8: switch1phy8@8 {
+			switch1phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -622,8 +628,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch1@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -634,19 +641,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1phy1_topaz: switch1phy1@11 {
+			switch1phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch1phy2_topaz: switch1phy2@12 {
+			switch1phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch1phy3_topaz: switch1phy3@13 {
+			switch1phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch1phy4_topaz: switch1phy4@14 {
+			switch1phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
@@ -689,8 +696,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch2@12 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x12>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -701,35 +709,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2phy1: switch2phy1@1 {
+			switch2phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch2phy2: switch2phy2@2 {
+			switch2phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch2phy3: switch2phy3@3 {
+			switch2phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch2phy4: switch2phy4@4 {
+			switch2phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch2phy5: switch2phy5@5 {
+			switch2phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch2phy6: switch2phy6@6 {
+			switch2phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch2phy7: switch2phy7@7 {
+			switch2phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch2phy8: switch2phy8@8 {
+			switch2phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -805,8 +813,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch2@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -817,19 +826,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2phy1_topaz: switch2phy1@11 {
+			switch2phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch2phy2_topaz: switch2phy2@12 {
+			switch2phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch2phy3_topaz: switch2phy3@13 {
+			switch2phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch2phy4_topaz: switch2phy4@14 {
+			switch2phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
index 3a9b6907185d..242820845707 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
@@ -26,6 +26,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_quad_pins>;
 
 		led-power1 {
 			label = "udpu:green:power";
@@ -82,8 +84,6 @@
 
 &spi0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_quad_pins>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
@@ -108,6 +108,10 @@
 	};
 };
 
+&spi_quad_pins {
+	function = "gpio";
+};
+
 &pinctrl_nb {
 	i2c2_recovery_pins: i2c2-recovery-pins {
 		groups = "i2c2";
diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
index 02ae1e153288..b99ac4c03a48 100644
--- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
@@ -12,9 +12,6 @@
 #include "armada-37xx.dtsi"
 
 / {
-	model = "Marvell Armada 3720 SoC";
-	compatible = "marvell,armada3720", "marvell,armada3700";
-
 	cpus {
 		cpu1: cpu@1 {
 			device_type = "cpu";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index e300145ad1a6..c612317043ea 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -11,8 +11,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
-	model = "Marvell Armada 37xx SoC";
-	compatible = "marvell,armada3700";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
@@ -68,7 +66,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -78,7 +76,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		internal-regs@d0000000 {
+		bus@d0000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -431,14 +429,14 @@
 			crypto: crypto@90000 {
 				compatible = "inside-secure,safexcel-eip97ies";
 				reg = <0x90000 0x20000>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "mem", "ring0", "ring1",
-						  "ring2", "ring3", "eip";
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "ring0", "ring1", "ring2",
+						  "ring3", "eip", "mem";
 				clocks = <&nb_periph_clk 15>;
 			};
 
@@ -526,6 +524,7 @@
 			pcie_intc: interrupt-controller {
 				interrupt-controller;
 				#interrupt-cells = <1>;
+				#address-cells = <0>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
index 4e46326dd123..570f901b4f4a 100644
--- a/arch/arm64/boot/dts/marvell/armada-7020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
@@ -8,9 +8,3 @@
 
 #include "armada-ap806-dual.dtsi"
 #include "armada-70x0.dtsi"
-
-/ {
-	model = "Marvell Armada 7020";
-	compatible = "marvell,armada7020", "marvell,armada-ap806-dual",
-		     "marvell,armada-ap806";
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 5e5baf6beea4..3add6506ff20 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -124,7 +124,6 @@
 
 	expander0: pca9555@21 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x21>;
@@ -214,7 +213,7 @@
 
 	sata-port@1 {
 		phys = <&cp0_comphy3 1>;
-		phy-names = "cp0-sata0-1-phy";
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
index 48202810bf78..6bdc4f1e6939 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -301,10 +301,8 @@
 	};
 
 	/* 88E6141 Topaz switch */
-	switch: switch@3 {
+	switch: ethernet-switch@3 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <3>;
 
 		pinctrl-names = "default";
@@ -314,35 +312,35 @@
 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			swport1: port@1 {
+			swport1: ethernet-port@1 {
 				reg = <1>;
 				label = "lan0";
 				phy-handle = <&swphy1>;
 			};
 
-			swport2: port@2 {
+			swport2: ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&swphy2>;
 			};
 
-			swport3: port@3 {
+			swport3: ethernet-port@3 {
 				reg = <3>;
 				label = "lan2";
 				phy-handle = <&swphy3>;
 			};
 
-			swport4: port@4 {
+			swport4: ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&swphy4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp0_eth1>;
@@ -355,19 +353,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			swphy1: swphy1@17 {
+			swphy1: ethernet-phy@17 {
 				reg = <17>;
 			};
 
-			swphy2: swphy2@18 {
+			swphy2: ethernet-phy@18 {
 				reg = <18>;
 			};
 
-			swphy3: swphy3@19 {
+			swphy3: ethernet-phy@19 {
 				reg = <19>;
 			};
 
-			swphy4: swphy4@20 {
+			swphy4: ethernet-phy@20 {
 				reg = <20>;
 			};
 		};
@@ -435,13 +433,13 @@
 	/* 7 + 12 SATA connector (J24) */
 	sata-port@0 {
 		phys = <&cp0_comphy2 0>;
-		phy-names = "cp0-sata0-0-phy";
+		status = "okay";
 	};
 
 	/* M.2-2250 B-key (J39) */
 	sata-port@1 {
 		phys = <&cp0_comphy3 1>;
-		phy-names = "cp0-sata0-1-phy";
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
index 2f440711d21d..710ac44870bd 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
@@ -9,12 +9,6 @@
 #include "armada-ap806-quad.dtsi"
 #include "armada-70x0.dtsi"
 
-/ {
-	model = "Marvell Armada 7040";
-	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
-		     "marvell,armada-ap806";
-};
-
 &cp0_pcie0 {
 	iommu-map =
 		<0x0   &smmu 0x480 0x20>,
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
index ba1307c0fadb..b6fc18876093 100644
--- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -9,12 +9,6 @@
 #include "armada-ap806-dual.dtsi"
 #include "armada-80x0.dtsi"
 
-/ {
-	model = "Marvell Armada 8020";
-	compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
-		     "marvell,armada-ap806";
-};
-
 /* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
  * in CP master is not connected (by package) to the oscillator. So
  * disable it. However, the RTC clock in CP slave is connected to the
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 4125202028c8..90ae93274a16 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -371,25 +371,25 @@
 };
 
 &cp0_gpio2 {
-	sata_reset {
+	sata-reset-hog {
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
-	lte_reset {
+	lte-reset-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_LOW>;
 		output-low;
 	};
 
-	wlan_disable {
+	wlan_disable-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_LOW>;
 		output-low;
 	};
 
-	lte_disable {
+	lte-disable-hog {
 		gpio-hog;
 		gpios = <21 GPIO_ACTIVE_LOW>;
 		output-low;
@@ -475,7 +475,7 @@
 
 	sata-port@1 {
 		phys = <&cp1_comphy0 1>;
-		phy-names = "cp1-sata0-1-phy";
+		status = "okay";
 	};
 };
 
@@ -497,42 +497,42 @@
 		reset-deassert-us = <10000>;
 	};
 
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_switch_reset_pins>;
 		reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan2";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan4";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp1_eth2>;
@@ -545,19 +545,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy3: switch0phy3@14 {
+			switch0phy3: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 92897bd7e6cf..21ecb9c12505 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -122,7 +122,6 @@
 	/* U31 */
 	expander0: pca9555@21 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x21>;
@@ -131,7 +130,6 @@
 	/* U25 */
 	expander1: pca9555@25 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x25>;
@@ -145,11 +143,12 @@
 
 	sata-port@0 {
 		phys = <&cp0_comphy1 0>;
-		phy-names = "cp0-sata0-0-phy";
+		status = "okay";
 	};
+
 	sata-port@1 {
 		phys = <&cp0_comphy3 1>;
-		phy-names = "cp0-sata0-1-phy";
+		status = "okay";
 	};
 };
 
@@ -306,11 +305,9 @@
 
 	sata-port@0 {
 		phys = <&cp1_comphy1 0>;
-		phy-names = "cp1-sata0-0-phy";
 	};
 	sata-port@1 {
 		phys = <&cp1_comphy3 1>;
-		phy-names = "cp1-sata0-1-phy";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index c864df9ec84d..f2d278d171eb 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -245,7 +245,7 @@
 	/* CPM Lane 5 - U29 */
 	sata-port@1 {
 		phys = <&cp0_comphy5 1>;
-		phy-names = "cp0-sata0-1-phy";
+		status = "okay";
 	};
 };
 
@@ -345,13 +345,13 @@
 	/* CPS Lane 1 - U32 */
 	sata-port@0 {
 		phys = <&cp1_comphy1 0>;
-		phy-names = "cp1-sata0-0-phy";
+		status = "okay";
 	};
 
 	/* CPS Lane 3 - U31 */
 	sata-port@1 {
 		phys = <&cp1_comphy3 1>;
-		phy-names = "cp1-sata0-1-phy";
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
index 42a60f3dd5d1..def25d51c4bf 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "IEI-Puzzle-M801";
-	compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806";
+	compatible = "iei,puzzle-m801", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806";
 
 	aliases {
 		ethernet0 = &cp0_eth0;
@@ -408,12 +408,12 @@
 
 	sata-port@0 {
 		phys = <&cp0_comphy2 0>;
-		phy-names = "cp0-sata0-0-phy";
+		status = "okay";
 	};
 
 	sata-port@1 {
 		phys = <&cp0_comphy5 1>;
-		phy-names = "cp0-sata0-1-phy";
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 22c2d6ebf381..3efd9b9e6892 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -9,12 +9,6 @@
 #include "armada-ap806-quad.dtsi"
 #include "armada-80x0.dtsi"
 
-/ {
-	model = "Marvell Armada 8040";
-	compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
-		     "marvell,armada-ap806";
-};
-
 &cp0_pcie0 {
 	iommu-map =
 		<0x0   &smmu 0x480 0x20>,
diff --git a/arch/arm64/boot/dts/marvell/armada-8080.dtsi b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
index 299e814d1ded..32bb56f2fe3f 100644
--- a/arch/arm64/boot/dts/marvell/armada-8080.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
@@ -6,9 +6,3 @@
  */
 
 #include "armada-ap810-ap0-octa-core.dtsi"
-
-/ {
-	model = "Marvell 8080 board";
-	compatible = "marvell,armada-8080", "marvell,armada-ap810-octa",
-				"marvell,armada-ap810";
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index 3ed6fba1f438..82f4dedfc25e 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -8,9 +8,6 @@
 #include "armada-ap806.dtsi"
 
 / {
-	model = "Marvell Armada AP806 Dual";
-	compatible = "marvell,armada-ap806-dual", "marvell,armada-ap806";
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index cf6a96ddcf40..f37f49c79a50 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -8,9 +8,6 @@
 #include "armada-ap806.dtsi"
 
 / {
-	model = "Marvell Armada AP806 Quad";
-	compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 866628679ac7..73a570cf1010 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -5,14 +5,8 @@
  * Device Tree file for Marvell Armada AP806.
  */
 
-#define AP_NAME		ap806
 #include "armada-ap80x.dtsi"
 
-/ {
-	model = "Marvell Armada AP806";
-	compatible = "marvell,armada-ap806";
-};
-
 &ap_syscon0 {
 	ap_clk: clock {
 		compatible = "marvell,ap806-clock";
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
index 8848238f9565..e8af7546e893 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
@@ -8,9 +8,6 @@
 #include "armada-ap807.dtsi"
 
 / {
-	model = "Marvell Armada AP807 Quad";
-	compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807";
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
index 4a23f65d475f..196793d8715c 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
@@ -5,14 +5,8 @@
  * Copyright (C) 2019 Marvell Technology Group Ltd.
  */
 
-#define AP_NAME		ap807
 #include "armada-ap80x.dtsi"
 
-/ {
-	model = "Marvell Armada AP807";
-	compatible = "marvell,armada-ap807";
-};
-
 &ap_syscon0 {
 	ap_clk: clock {
 		compatible = "marvell,ap807-clock";
@@ -33,3 +27,6 @@
 		     "marvell,armada-ap806-sdhci"; /* Backward compatibility */
 };
 
+&ap_thermal {
+	compatible = "marvell,armada-ap807-thermal";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 2c920e22cec2..40e146982921 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -48,20 +48,35 @@
 		};
 	};
 
-	AP_NAME {
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupt-parent = <&pic>;
+		interrupts = <17>;
+	};
+
+	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
 		ranges;
 
-		config-space@f0000000 {
+		bus@f0000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
 			ranges = <0x0 0x0 0xf0000000 0x1000000>;
 
-			smmu: iommu@5000000 {
+			smmu: iommu@100000 {
 				compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
 				reg = <0x100000 0x100000>;
 				dma-coherent;
@@ -122,23 +137,8 @@
 				};
 			};
 
-			timer {
-				compatible = "arm,armv8-timer";
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-			};
-
-			pmu {
-				compatible = "arm,cortex-a72-pmu";
-				interrupt-parent = <&pic>;
-				interrupts = <17>;
-			};
-
 			odmi: odmi@300000 {
 				compatible = "marvell,odmi-controller";
-				interrupt-controller;
 				msi-controller;
 				marvell,odmi-frames = <4>;
 				reg = <0x300000 0x4000>,
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
index d1a7143ef3d4..2e719ffc8289 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
@@ -11,7 +11,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "marvell,armada-ap810-octa";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
index 2f9ab6b4a2c9..abb37e5fc2c0 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
@@ -10,10 +10,9 @@
 /dts-v1/;
 
 / {
-	model = "Marvell Armada AP810";
-	compatible = "marvell,armada-ap810";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	aliases {
 		serial0 = &uart0_ap0;
@@ -25,14 +24,21 @@
 		method = "smc";
 	};
 
-	ap810-ap0 {
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 		ranges;
 
-		config-space@e8000000 {
+		bus@e8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -62,14 +68,6 @@
 				};
 			};
 
-			timer {
-				compatible = "arm,armv8-timer";
-				interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-					     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-					     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-					     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-			};
-
 			xor@400000 {
 				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x400000 0x1000>,
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index 4fd33b0fa56e..e3cfd168becc 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -5,8 +5,4 @@
  * Device Tree file for Marvell Armada CP110.
  */
 
-#define CP11X_TYPE cp110
-
 #include "armada-cp11x.dtsi"
-
-#undef CP11X_TYPE
diff --git a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
index 1d0a9653e681..ec6432c8db7c 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
@@ -5,8 +5,4 @@
  * Device Tree file for Marvell Armada CP115.
  */
 
-#define CP11X_TYPE cp115
-
 #include "armada-cp11x.dtsi"
-
-#undef CP11X_TYPE
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 4ec1aae0a3a9..d9d409eac259 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -17,7 +17,7 @@
 	 * The contents of the node are defined below, in order to
 	 * save one indentation level
 	 */
-	CP11X_NAME: CP11X_NAME { };
+	CP11X_NAME: CP11X_NODE_NAME(bus) { };
 
 	/*
 	 * CPs only have one sensor in the thermal IC.
@@ -51,7 +51,7 @@
 	interrupt-parent = <&CP11X_LABEL(icu_nsr)>;
 	ranges;
 
-	config-space@CP11X_BASE {
+	bus@CP11X_BASE {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -202,6 +202,7 @@
 			CP11X_LABEL(icu_nsr): interrupt-controller@10 {
 				compatible = "marvell,cp110-icu-nsr";
 				reg = <0x10 0x20>;
+				#address-cells = <0>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				msi-parent = <&gicp>;
@@ -347,10 +348,12 @@
 
 			sata-port@0 {
 				reg = <0>;
+				status = "disabled";
 			};
 
 			sata-port@1 {
 				reg = <1>;
+				status = "disabled";
 			};
 		};
 
@@ -511,14 +514,14 @@
 		CP11X_LABEL(crypto): crypto@800000 {
 			compatible = "inside-secure,safexcel-eip197b";
 			reg = <0x800000 0x200000>;
-			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
-				<88 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <88 IRQ_TYPE_LEVEL_HIGH>,
 				<89 IRQ_TYPE_LEVEL_HIGH>,
 				<90 IRQ_TYPE_LEVEL_HIGH>,
 				<91 IRQ_TYPE_LEVEL_HIGH>,
-				<92 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mem", "ring0", "ring1",
-				"ring2", "ring3", "eip";
+				<92 IRQ_TYPE_LEVEL_HIGH>,
+				<87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3",
+					  "eip", "mem";
 			clock-names = "core", "reg";
 			clocks = <&CP11X_LABEL(clk) 1 26>,
 				 <&CP11X_LABEL(clk) 1 17>;
diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts b/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts
new file mode 100644
index 000000000000..788a5c302b17
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9130 Clearfog Base.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9130-sr-som.dtsi"
+#include "cn9130-cf.dtsi"
+
+/ {
+	model = "SolidRun CN9130 Clearfog Base";
+	compatible = "solidrun,cn9130-clearfog-base",
+		     "solidrun,cn9130-sr-som", "marvell,cn9130";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&cp0_gpio1 31 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+
+	rfkill-m2-gnss {
+		compatible = "rfkill-gpio";
+		label = "m.2 GNSS";
+		radio-type = "gps";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&expander0 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* M.2 is B-keyed, so w-disable is for WWAN */
+	rfkill-m2-wwan {
+		compatible = "rfkill-gpio";
+		label = "m.2 WWAN";
+		radio-type = "wwan";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&expander0 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* SRDS #3 - SGMII 1GE */
+&cp0_eth1 {
+	phy = <&phy1>;
+	phys = <&cp0_comphy3 1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&cp0_eth2_phy {
+	/*
+	 * Configure LEDs default behaviour:
+	 * - LED[0]: link/activity: On/blink (green)
+	 * - LED[1]: link is 100/1000Mbps: On (yellow)
+	 * - LED[2]: high impedance (floating)
+	 */
+	marvell,reg-init = <3 16 0xf000 0x0a61>;
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			default-state = "keep";
+		};
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_WAN;
+			default-state = "keep";
+		};
+	};
+};
+
+&cp0_gpio1 {
+	sim-select-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sim-select";
+	};
+};
+
+&cp0_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		/*
+		 * Configure LEDs default behaviour:
+		 * - LED[0]: link/activity: On/blink (green)
+		 * - LED[1]: link is 100/1000Mbps: On (yellow)
+		 * - LED[2]: high impedance (floating)
+		 *
+		 * Configure LEDs electrical polarity
+		 * - on-state: low
+		 * - off-state: high (not hi-z, to avoid residual glow)
+		 */
+		marvell,reg-init = <3 16 0xf000 0x0a61>,
+				   <3 17 0x003f 0x000a>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&cp0_pinctrl {
+	pinctrl-0 = <&sim_select_pins>;
+	pintrl-names = "default";
+
+	rear_button_pins: cp0-rear-button-pins {
+		marvell,pins = "mpp31";
+		marvell,function = "gpio";
+	};
+
+	sim_select_pins: cp0-sim-select-pins {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+};
+
+/*
+ * SRDS #4 - USB 3.0 host on M.2 connector
+ * USB-2.0 Host on Type-A connector
+ */
+&cp0_usb3_1 {
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&expander0 {
+	m2-full-card-power-off-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-full-card-power-off";
+	};
+
+	m2-reset-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-reset";
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts b/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts
new file mode 100644
index 000000000000..a27fe0042867
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9130 Clearfog Pro.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9130-sr-som.dtsi"
+#include "cn9130-cf.dtsi"
+
+/ {
+	model = "SolidRun CN9130 Clearfog Pro";
+	compatible = "solidrun,cn9130-clearfog-pro",
+		     "solidrun,cn9130-sr-som", "marvell,cn9130";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+/* SRDS #3 - SGMII 1GE to L2 switch */
+&cp0_eth1 {
+	phys = <&cp0_comphy3 1>;
+	phy-mode = "sgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&cp0_eth2_phy {
+	/*
+	 * Configure LEDs default behaviour similar to switch ports:
+	 * - LED[0]: link/activity: On/blink (green)
+	 * - LED[1]: link is 100/1000Mbps: On (red)
+	 * - LED[2]: high impedance (floating)
+	 *
+	 * Switch port defaults:
+	 * - LED0: link/activity: On/blink (green)
+	 * - LED1: link is 1000Mbps: On (red)
+	 *
+	 * Identical configuration is impossible with hardware offload.
+	 */
+	marvell,reg-init = <3 16 0xf000 0x0a61>;
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			label = "LED2";
+			default-state = "keep";
+		};
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			label = "LED1";
+			default-state = "keep";
+		};
+	};
+};
+
+&cp0_mdio {
+	ethernet-switch@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-0 = <&dsa_clk_pins &dsa_pins>;
+		pinctrl-names = "default";
+		reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy = <&switch0phy0>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED12";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED11";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy = <&switch0phy1>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED10";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED9";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy = <&switch0phy2>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED8";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED7";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy = <&switch0phy3>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED6";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED5";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan1";
+				phy = <&switch0phy4>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED4";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED3";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&cp0_eth1>;
+				phy-mode = "sgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ethernet-port@6 {
+				reg = <6>;
+				label = "lan6";
+				phy-mode = "rgmii";
+
+				/*
+				 * Because of mdio address conflict the
+				 * external phy is not readable.
+				 * Force a fixed link instead.
+				 */
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: ethernet-phy@0 {
+				reg = <0x0>;
+			};
+
+			switch0phy1: ethernet-phy@1 {
+				reg = <0x1>;
+				/*
+				 * Indirectly configure default behaviour
+				 * for port lan6 leds behind external phy.
+				 * Internal PHYs are not using page 3,
+				 * therefore writing to it is safe.
+				 */
+				marvell,reg-init = <3 16 0xf000 0x0a61>;
+			};
+
+			switch0phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: ethernet-phy@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+		};
+
+		/*
+		 * There is an external phy on the switch mdio bus.
+		 * Because its mdio address collides with internal phys,
+		 * it is not readable.
+		 *
+		 * mdio-external {
+		 *	compatible = "marvell,mv88e6xxx-mdio-external";
+		 *	#address-cells = <1>;
+		 *	#size-cells = <0>;
+		 *
+		 *	ethernet-phy@1 {
+		 *		reg = <0x1>;
+		 *	};
+		 * };
+		 */
+	};
+};
+
+/* SRDS #4 - miniPCIe (CON2) */
+&cp0_pcie1 {
+	num-lanes = <1>;
+	phys = <&cp0_comphy4 1>;
+	/* dw-pcie inverts internally */
+	reset-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	dsa_clk_pins: cp0-dsa-clk-pins {
+		marvell,pins = "mpp40";
+		marvell,function = "synce1";
+	};
+
+	dsa_pins: cp0-dsa-pins {
+		marvell,pins = "mpp27", "mpp29";
+		marvell,function = "gpio";
+	};
+
+	rear_button_pins: cp0-rear-button-pins {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	cp0_spi1_cs1_pins: cp0-spi1-cs1-pins {
+		marvell,pins = "mpp12";
+		marvell,function = "spi1";
+	};
+};
+
+&cp0_spi1 {
+	/* add pin for chip-select 1 on mikrobus */
+	pinctrl-0 = <&cp0_spi1_pins &cp0_spi1_cs1_pins>;
+};
+
+/* USB-2.0 Host on Type-A connector */
+&cp0_usb3_1 {
+	phys = <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&expander0 {
+	/* CON2 */
+	pcie1-0-clkreq-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "pcie1.0-clkreq";
+	};
+
+	/* CON2 */
+	pcie1-0-w-disable-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "pcie1.0-w-disable";
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
new file mode 100644
index 000000000000..bd42bfbe408b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for common base of SolidRun CN9130 Clearfog Base and Pro.
+ *
+ */
+
+/ {
+	aliases {
+		/* label nics same order as armada 388 clearfog */
+		ethernet0 = &cp0_eth2;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth0;
+		i2c1 = &cp0_i2c1;
+		mmc1 = &cp0_sdhci0;
+	};
+
+	reg_usb3_vbus0: regulator-usb3-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c1>;
+		los-gpios = <&expander0 12 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&expander0 15 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+/* SRDS #2 - SFP+ 10GE */
+&cp0_eth0 {
+	managed = "in-band-status";
+	phys = <&cp0_comphy2 0>;
+	phy-mode = "10gbase-r";
+	sfp = <&sfp>;
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	expander0: gpio-expander@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-0 = <&expander0_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		/* CON3 */
+		pcie2-0-clkreq-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "pcie2.0-clkreq";
+		};
+
+		/* CON3 */
+		pcie2-0-w-disable-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "pcie2.0-w-disable";
+		};
+
+		usb3-ilimit-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "usb3-current-limit";
+		};
+
+		m2-devslp-hog {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "m.2 devslp";
+		};
+	};
+
+	/* The MCP3021 supports standard and fast modes */
+	adc@4c {
+		compatible = "microchip,mcp3021";
+		reg = <0x4c>;
+	};
+
+	carrier_eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+};
+
+&cp0_i2c1 {
+	/*
+	 * Routed to SFP, M.2, mikrobus, and miniPCIe
+	 * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with
+	 *  address pins tied low, which takes addresses 0x50 and 0x51.
+	 * Mikrobus doesn't specify beyond an I2C bus being present.
+	 * PCIe uses ARP to assign addresses, or 0x63-0x64.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* SRDS #5 - miniPCIe (CON3) */
+&cp0_pcie2 {
+	num-lanes = <1>;
+	phys = <&cp0_comphy5 2>;
+	/* dw-pcie inverts internally */
+	reset-gpios = <&expander0 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	cp0_i2c1_pins: cp0-i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+
+	cp0_mmc0_pins: cp0-mmc0-pins {
+		marvell,pins = "mpp43", "mpp56", "mpp57", "mpp58",
+			       "mpp59", "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+
+	mikro_spi_pins: cp0-spi1-cs1-pins {
+		marvell,pins = "mpp12";
+		marvell,function = "spi1";
+	};
+
+	mikro_uart_pins: cp0-uart-pins {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "uart1";
+	};
+
+	expander0_pins: cp0-expander0-pins {
+		marvell,pins = "mpp4";
+		marvell,function = "gpio";
+	};
+};
+
+/* SRDS #0 - SATA on M.2 connector */
+&cp0_sata0 {
+	status = "okay";
+
+	sata-port@1 {
+		phys = <&cp0_comphy0 1>;
+		status = "okay";
+	};
+};
+
+/* microSD */
+&cp0_sdhci0 {
+	pinctrl-0 = <&cp0_mmc0_pins>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&cp0_spi1 {
+	/* CS1 for mikrobus */
+	pinctrl-0 = <&cp0_spi1_pins &mikro_spi_pins>;
+};
+
+/*
+ * SRDS #1 - USB-3.0 Host on Type-A connector
+ * USB-2.0 Host on mPCI-e connector (CON3)
+ */
+&cp0_usb3_0 {
+	phys = <&cp0_comphy1 0>, <&cp0_utmi0>;
+	phy-names = "comphy", "utmi";
+	vbus-supply = <&reg_usb3_vbus0>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+/* mikrobus uart */
+&cp0_uart0 {
+	pinctrl-0 = <&mikro_uart_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
index 0904cb0309ae..34194745f79e 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
@@ -28,6 +28,7 @@
 		status = "okay";
 		/* Generic PHY, providing serdes lanes */
 		phys = <&cp0_comphy2 0>;
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 47d45ff3d6f5..5e7d6de3cdde 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -26,7 +26,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	ap0_reg_mmc_vccq: ap0_mmc_vccq@0 {
+	ap0_reg_mmc_vccq: regulator-1 {
 		compatible = "regulator-gpio";
 		regulator-name = "ap0_mmc_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -36,7 +36,7 @@
 			  3300000 0x0>;
 	};
 
-	cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+	cp0_reg_usb3_vbus1: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0-xhci1-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -45,16 +45,16 @@
 		gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp0_usb3_0_phy0: cp0_usb3_phy0 {
+	cp0_usb3_0_phy0: usb-phy-1 {
 		compatible = "usb-nop-xceiv";
 	};
 
-	cp0_usb3_0_phy1: cp0_usb3_phy1 {
+	cp0_usb3_0_phy1: usb-phy-2 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp0_reg_usb3_vbus1>;
 	};
 
-	cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+	cp0_reg_sd_vccq: regulator-3 {
 		compatible = "regulator-gpio";
 		regulator-name = "cp0_sd_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -64,7 +64,7 @@
 			  3300000 0x0>;
 	};
 
-	cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+	cp0_reg_sd_vcc: regulator-4 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0_sd_vcc";
 		regulator-min-microvolt = <3300000>;
@@ -82,7 +82,6 @@
 		tx-disable-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <3000>;
-		status = "okay";
 	};
 };
 
@@ -207,11 +206,9 @@
 		reg = <0>;
 	};
 
-	switch6: switch0@6 {
+	switch6: ethernet-switch@6 {
 		/* Actual device is MV88E6393X */
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <6>;
 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
@@ -220,59 +217,59 @@
 
 		dsa,member = <0 0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "p1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "p2";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "p3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "p4";
 				phy-handle = <&switch0phy4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "p5";
 				phy-handle = <&switch0phy5>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				label = "p6";
 				phy-handle = <&switch0phy6>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				reg = <7>;
 				label = "p7";
 				phy-handle = <&switch0phy7>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				reg = <8>;
 				label = "p8";
 				phy-handle = <&switch0phy8>;
 			};
 
-			port@9 {
+			ethernet-port@9 {
 				reg = <9>;
 				label = "p9";
 				phy-mode = "10gbase-r";
@@ -280,7 +277,7 @@
 				managed = "in-band-status";
 			};
 
-			port@a {
+			ethernet-port@a {
 				reg = <10>;
 				ethernet = <&cp0_eth0>;
 				phy-mode = "10gbase-r";
@@ -293,35 +290,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
new file mode 100644
index 000000000000..028496ebc473
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB Com Express CPU module board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-DB COM EXPRESS type 7 CPU module board";
+	compatible = "marvell,cn9130-cpu-module", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+	regulator-max-microvolt = <1800000>;
+	states = <1800000 0x1 1800000 0x0>;
+	/delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+	status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+	status = "disabled";
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_eth0 {
+	status = "disabled";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	phy0: ethernet-phy@0 {
+		status = "okay";
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_ge_mdio_pins: ge-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+	};
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_spi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index 6eb6a175de38..50e9e0724828 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -30,7 +30,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	ap0_reg_sd_vccq: ap0_sd_vccq@0 {
+	ap0_reg_sd_vccq: regulator-1 {
 		compatible = "regulator-gpio";
 		regulator-name = "ap0_sd_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -39,7 +39,7 @@
 		states = <1800000 0x1 3300000 0x0>;
 	};
 
-	cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
+	cp0_reg_usb3_vbus0: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0-xhci0-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -48,12 +48,12 @@
 		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp0_usb3_0_phy0: cp0_usb3_phy@0 {
+	cp0_usb3_0_phy0: usb-phy-1 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp0_reg_usb3_vbus0>;
 	};
 
-	cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+	cp0_reg_usb3_vbus1: regulator-3 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0-xhci1-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -62,12 +62,12 @@
 		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp0_usb3_0_phy1: cp0_usb3_phy@1 {
+	cp0_usb3_0_phy1: usb-phy-2 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp0_reg_usb3_vbus1>;
 	};
 
-	cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+	cp0_reg_sd_vccq: regulator-4 {
 		compatible = "regulator-gpio";
 		regulator-name = "cp0_sd_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -77,7 +77,7 @@
 			  3300000 0x0>;
 	};
 
-	cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+	cp0_reg_sd_vcc: regulator-5 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0_sd_vcc";
 		regulator-min-microvolt = <3300000>;
@@ -87,7 +87,7 @@
 		regulator-always-on;
 	};
 
-	cp0_sfp_eth0: sfp-eth@0 {
+	cp0_sfp_eth0: sfp-eth-1 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp0_sfpp0_i2c>;
 		los-gpios = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
@@ -209,7 +209,6 @@
 			/* U12 */
 			cp0_module_expander1: pca9555@21 {
 				compatible = "nxp,pca9555";
-				pinctrl-names = "default";
 				gpio-controller;
 				#gpio-cells = <2>;
 				reg = <0x21>;
@@ -311,8 +310,6 @@
 	reg = <0x700680 0x50>;
 
 	flash@0 {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		/* On-board MUX does not allow higher frequencies */
diff --git a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
new file mode 100644
index 000000000000..f95202decfce
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		i2c0 = &cp0_i2c0;
+		mmc0 = &ap_sdhci0;
+		rtc0 = &cp0_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	v_1_8: regulator-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* requires assembly of R9307 */
+	vhv: regulator-vhv-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vhv-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-0 = <&cp0_reg_vhv_pins>;
+		pinctrl-names = "default";
+		gpios = <&cp0_gpio2 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ap_pinctrl {
+	ap_mmc0_pins: ap-mmc0-pins {
+		marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5",
+					   "mpp6", "mpp7", "mpp8", "mpp9", "mpp10", "mpp12";
+		marvell,function = "sdio";
+		/*
+		 * mpp12 is emmc reset, function should be sdio (hw_rst),
+		 * but pinctrl-mvebu does not support this.
+		 *
+		 * From pinctrl-mvebu.h:
+		 * "The name will be used to switch to this setting in DT description, e.g.
+		 * marvell,function = "uart2". subname is only for debugging purposes."
+		 */
+	};
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	pinctrl-0 = <&ap_mmc0_pins>;
+	pinctrl-names = "default";
+	vqmmc-supply = <&v_1_8>;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* for assembly with phy */
+&cp0_eth2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_eth2_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&cp0_eth2_phy>;
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	som_eeprom: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+};
+
+&cp0_mdio {
+	pinctrl-0 = <&cp0_mdio_pins>;
+	status = "okay";
+
+	/* assembly option */
+	cp0_eth2_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp0_spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+	/* max speed limited by a mux */
+	spi-max-frequency = <1800000000>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		/* read command supports max. 50MHz */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_eth2_pins: cp0-ge2-rgmii-pins {
+			marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47",
+				       "mpp48", "mpp49", "mpp50", "mpp51",
+				       "mpp52", "mpp53", "mpp54", "mpp55";
+			/* docs call it "ge2", but cp110-pinctrl "ge1" */
+			marvell,function = "ge1";
+		};
+
+		cp0_i2c0_pins: cp0-i2c0-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+
+		cp0_mdio_pins: cp0-mdio-pins {
+			marvell,pins = "mpp0", "mpp1";
+			marvell,function = "ge";
+		};
+
+		cp0_spi1_pins: cp0-spi1-pins {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+
+		cp0_reg_vhv_pins: cp0-reg-vhv-pins {
+			marvell,pins = "mpp41";
+			marvell,function = "gpio";
+		};
+	};
+};
+
+/* AP default console */
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
new file mode 100644
index 000000000000..338853d3b179
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9130 Clearfog Base.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9130-sr-som.dtsi"
+
+/*
+ * Instantiate the external CP115
+ */
+
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/ {
+	model = "SolidRun CN9131 SolidWAN";
+	compatible = "solidrun,cn9131-solidwan",
+		     "solidrun,cn9130-sr-som", "marvell,cn9130";
+
+	aliases {
+		ethernet0 = &cp1_eth1;
+		ethernet1 = &cp1_eth2;
+		ethernet2 = &cp0_eth1;
+		ethernet3 = &cp0_eth2;
+		ethernet4 = &cp0_eth0;
+		ethernet5 = &cp1_eth0;
+		gpio0 = &ap_gpio;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		gpio3 = &cp1_gpio1;
+		gpio4 = &cp1_gpio2;
+		gpio5 = &expander0;
+		i2c0 = &cp0_i2c0;
+		i2c1 = &cp0_i2c1;
+		i2c2 = &cp1_i2c1;
+		mmc0 = &ap_sdhci0;
+		mmc1 = &cp0_sdhci0;
+		rtc0 = &cp0_rtc;
+		rtc1 = &carrier_rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_led_pins &cp1_led_pins>;
+
+		/* for sfp-1 (J42) */
+		led-sfp1-activity {
+			label = "sfp1:green";
+			gpios = <&cp0_gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* for sfp-1 (J42) */
+		led-sfp1-link {
+			label = "sfp1:yellow";
+			gpios = <&cp0_gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* (J28) */
+		led-sfp0-activity {
+			label = "sfp0:green";
+			gpios = <&cp1_gpio2 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* (J28) */
+		led-sfp0-link {
+			label = "sfp0:yellow";
+			gpios = <&cp1_gpio2 23 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/* Type-A port on J53 */
+	reg_usb_a_vbus0: regulator-usb-a-vbus0 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&cp0_reg_usb_a_vbus0_pins>;
+		pinctrl-names = "default";
+		regulator-name = "vbus0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&cp0_gpio1 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_a_vbus1: regulator-usb-a-vbus1 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&cp0_reg_usb_a_vbus1_pins>;
+		pinctrl-names = "default";
+		regulator-name = "vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&cp0_gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sfp0: sfp-0 {
+		compatible = "sff,sfp";
+		pinctrl-0 = <&cp0_sfp0_pins>;
+		pinctrl-names = "default";
+		i2c-bus = <&cp0_i2c1>;
+		los-gpios = <&cp0_gpio2 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp0_gpio2 1 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_gpio1 31 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		pinctrl-0 = <&cp1_sfp1_pins>;
+		pinctrl-names = "default";
+		i2c-bus = <&cp1_i2c1>;
+		los-gpios = <&cp1_gpio2 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp1_gpio2 18 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio2 1 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp1_gpio2 17 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SRDS #2 - SFP+ 10GE */
+&cp0_eth0 {
+	managed = "in-band-status";
+	phy-mode = "10gbase-r";
+	phys = <&cp0_comphy2 0>;
+	sfp = <&sfp0>;
+	status = "okay";
+};
+
+/* SRDS #3 - SGMII 1GE */
+&cp0_eth1 {
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	/* Without mdio phy access rely on sgmii auto-negotiation. */
+	phys = <&cp0_comphy3 1>;
+	status = "okay";
+};
+
+/* SRDS #1 - SGMII */
+&cp0_eth2 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phy = <&cp0_phy1>;
+	phys = <&cp0_comphy1 2>;
+};
+
+&cp0_gpio1 {
+	pcie0-0-w-disable-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "pcie0.0-w-disable";
+	};
+
+	/* J34 */
+	m2-full-card-power-off-hog {
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-full-card-power-off";
+	};
+};
+
+&cp0_i2c0 {
+	/* assembly option */
+	fan-controller@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+	};
+
+	expander0: gpio@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+
+		usb-a-vbus0-ilimit-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "vbus0-ilimit";
+		};
+
+		/* duplicate connection, controlled by soc gpio */
+		usb-vbus0-enable-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "vbus0-enable";
+		};
+
+		usb-a-vbus1-ilimit-hog {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "vbus1-ilimit";
+		};
+
+		/* duplicate connection, controlled by soc gpio */
+		usb-vbus1-enable-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "vbus1-enable";
+		};
+	};
+
+	carrier_eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+
+	/* usb-hub@60 */
+
+	/* assembly option */
+	carrier_rtc: rtc@68 {
+		compatible = "st,m41t83";
+		reg = <0x68>;
+		pinctrl-0 = <&cp1_rtc_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&cp1_gpio1>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&cp1_gpio1 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cp0_i2c1 {
+	/*
+	 * Routed to SFP.
+	 * Limit to 100kHz for compatibility with SFP modules,
+	 * featuring AT24C01A/02/04 at addresses 0x50/0x51.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cp0_mdio {
+	/*
+	 * SoM + Carrier each have a PHY at address 0.
+	 * Remove the SoM phy node, and skip adding the carrier node.
+	 * SGMII Auto-Negotation is enabled by bootloader for
+	 * autonomous operation without mdio control.
+	 */
+	/delete-node/ ethernet-phy@0;
+
+	/* U17016 */
+	cp0_phy1: ethernet-phy@1 {
+		reg = <1>;
+		/*
+		 * Configure LEDs default behaviour:
+		 * - LED[0]: link is 1000Mbps: On (yellow)
+		 * - LED[1]: link/activity: On/blink (green)
+		 * - LED[2]: high impedance (floating)
+		 */
+		marvell,reg-init = <3 16 0xf000 0x0a17>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+/* SRDS #0 - miniPCIe */
+&cp0_pcie0 {
+	num-lanes = <1>;
+	phys = <&cp0_comphy0 0>;
+	status = "okay";
+};
+
+/* SRDS #5 - M.2 B-Key (J34) */
+&cp0_pcie2 {
+	num-lanes = <1>;
+	phys = <&cp0_comphy5 2>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	pinctrl-0 = <&cp0_m2_0_shutdown_pins &cp0_mpcie_rfkill_pins>;
+	pinctrl-names = "default";
+
+	cp0_i2c1_pins: cp0-i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+
+	cp0_led_pins: cp0-led-pins {
+		marvell,pins = "mpp4", "mpp7";
+		marvell,function = "gpio";
+	};
+
+	cp0_m2_0_shutdown_pins: cp0-m2-0-shutdown-pins {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+
+	cp0_mmc0_pins: cp0-mmc0-pins {
+		marvell,pins = "mpp43", "mpp56", "mpp57", "mpp58",
+			       "mpp59", "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+
+	cp0_mpcie_rfkill_pins: cp0-mpcie-rfkill-pins {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	cp0_reg_usb_a_vbus0_pins: cp0-reg-usb-a-vbus0-pins {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	cp0_reg_usb_a_vbus1_pins: cp0-reg-usb-a-vbus1-pins {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	cp0_sfp0_pins: cp0-sfp0-pins {
+		marvell,pins = "mpp31", "mpp32", "mpp33", "mpp34";
+		marvell,function = "gpio";
+	};
+
+	cp0_spi1_cs1_pins: cp0-spi1-cs1-pins {
+		marvell,pins = "mpp12";
+		marvell,function = "spi1";
+	};
+};
+
+/* microSD */
+&cp0_sdhci0 {
+	pinctrl-0 = <&cp0_mmc0_pins>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&cp0_spi1 {
+	/* add pin for chip-select 1 */
+	pinctrl-0 = <&cp0_spi1_pins &cp0_spi1_cs1_pins>;
+
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		/* read command supports max. 50MHz */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+/* USB-2.0 Host to USB-Hub */
+&cp0_usb3_0 {
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SRDS #4 - USB-3.0 Host to USB-Hub */
+&cp0_usb3_1 {
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp0_utmi1 {
+	status = "disabled";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* SRDS #4 - SFP+ 10GE */
+&cp1_eth0 {
+	managed = "in-band-status";
+	phy-mode = "10gbase-r";
+	phys = <&cp1_comphy4 0>;
+	sfp = <&sfp1>;
+	status = "okay";
+};
+
+/* SRDS #3 - SGMII 1GE */
+&cp1_eth1 {
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phy = <&cp1_phy0>;
+	phys = <&cp1_comphy3 1>;
+	status = "okay";
+};
+
+/* SRDS #5 - SGMII 1GE */
+&cp1_eth2 {
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phy = <&cp1_phy1>;
+	phys = <&cp1_comphy5 2>;
+	status = "okay";
+};
+
+&cp1_gpio1 {
+	status = "okay";
+
+	/* J30 */
+	m2-full-card-power-off-hog-0 {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-full-card-power-off";
+	};
+
+	/* J44 */
+	m2-full-card-power-off-hog-1 {
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-full-card-power-off";
+	};
+};
+
+&cp1_gpio2 {
+	status = "okay";
+};
+
+&cp1_i2c1 {
+	/*
+	 * Routed to SFP.
+	 * Limit to 100kHz for compatibility with SFP modules,
+	 * featuring AT24C01A/02/04 at addresses 0x50/0x51.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&cp1_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cp1_mdio {
+	pinctrl-0 = <&cp1_mdio_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	cp1_phy0: ethernet-phy@0 {
+		reg = <0>;
+		/*
+		 * Configure LEDs default behaviour:
+		 * - LED[0]: link is 1000Mbps: On (yellow)
+		 * - LED[1]: link/activity: On/blink (green)
+		 * - LED[2]: high impedance (floating)
+		 */
+		marvell,reg-init = <3 16 0xf000 0x0a17>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+
+	cp1_phy1: ethernet-phy@1 {
+		reg = <1>;
+		/*
+		 * Configure LEDs default behaviour:
+		 * - LED[0]: link is 1000Mbps: On (yellow)
+		 * - LED[1]: link/activity: On/blink (green)
+		 * - LED[2]: high impedance (floating)
+		 */
+		marvell,reg-init = <3 16 0xf000 0x0a17>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+/* SRDS #0 - M.2 (J30) */
+&cp1_pcie0 {
+	num-lanes = <1>;
+	phys = <&cp1_comphy0 0>;
+	status = "okay";
+};
+
+&cp1_rtc {
+	status = "disabled";
+};
+
+/* SRDS #1 - SATA on M.2 (J44) */
+&cp1_sata0 {
+	status = "okay";
+
+	/* only port 0 is available */
+	sata-port@0 {
+		phys = <&cp1_comphy1 0>;
+		status = "okay";
+	};
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+		pinctrl-0 = <&cp1_m2_1_shutdown_pins &cp1_m2_2_shutdown_pins>;
+		pinctrl-names = "default";
+
+		cp1_i2c1_pins: cp0-i2c1-pins {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+
+		cp1_led_pins: cp1-led-pins {
+			marvell,pins = "mpp54", "mpp55";
+			marvell,function = "gpio";
+		};
+
+		cp1_m2_1_shutdown_pins: cp1-m2-1-shutdown-pins {
+			marvell,pins = "mpp29";
+			marvell,function = "gpio";
+		};
+
+		cp1_m2_2_shutdown_pins: cp1-m2-2-shutdown-pins {
+			marvell,pins = "mpp30";
+			marvell,function = "gpio";
+		};
+
+		cp1_mdio_pins: cp1-mdio-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "ge";
+		};
+
+		cp1_rtc_pins: cp1-rtc-pins {
+			marvell,pins = "mpp12", "mpp13";
+			marvell,function = "gpio";
+		};
+
+		cp1_sfp1_pins: cp1-sfp1-pins {
+			marvell,pins = "mpp33", "mpp34", "mpp49", "mpp50";
+			marvell,function = "gpio";
+		};
+	};
+};
+
+/*
+ * SRDS #2 - USB-3.0 Host to M.2 (J44)
+ * USB-2.0 Host to M.2 (J30)
+ */
+&cp1_usb3_0 {
+	phys = <&cp1_comphy2 0>, <&cp1_utmi0>;
+	phy-names = "comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* USB-2.0 Host to M.2 (J44) */
+&cp1_usb3_1 {
+	phys = <&cp1_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp1_utmi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
new file mode 100644
index 000000000000..6f3914bcfd01
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB Com Express CPU module board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9131-DB COM EXPRESS type 7 CPU module board";
+	compatible = "marvell,cn9131-cpu-module", "marvell,cn9131", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+	regulator-max-microvolt = <1800000>;
+	states = <1800000 0x1 1800000 0x0>;
+	/delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+	/delete-property/ gpio;
+};
+
+&cp1_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+	status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+	status = "disabled";
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_eth0 {
+	status = "disabled";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	phy0: ethernet-phy@0 {
+		status = "okay";
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_ge_mdio_pins: ge-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+	};
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_spi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp1_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp1_usb3_0_phy0>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy3 1>;
+	phy-names = "usb";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
index ff8422fae31b..626042fce7e2 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
@@ -18,7 +18,7 @@
 		ethernet4 = &cp1_eth1;
 	};
 
-	cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
+	cp1_reg_usb3_vbus0: regulator-6 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_xhci0_vbus_pins>;
@@ -29,12 +29,12 @@
 		gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp1_usb3_0_phy0: cp1_usb3_phy0 {
+	cp1_usb3_0_phy0: usb-phy-3 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp1_reg_usb3_vbus0>;
 	};
 
-	cp1_sfp_eth1: sfp-eth1 {
+	cp1_sfp_eth1: sfp-eth-2 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp1_i2c0>;
 		los-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
@@ -127,6 +127,7 @@
 	sata-port@1 {
 		/* Generic PHY, providing serdes lanes */
 		phys = <&cp1_comphy5 1>;
+		status = "okay";
 	};
 };
 
@@ -138,8 +139,6 @@
 	reg = <0x700680 0x50>;
 
 	flash@0 {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		/* On-board MUX does not allow higher frequencies */
diff --git a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
new file mode 100644
index 000000000000..5cf83d8ca1f5
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
@@ -0,0 +1,683 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9132 Clearfog.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9132-sr-cex7.dtsi"
+
+/ {
+	model = "SolidRun CN9132 Clearfog";
+	compatible = "solidrun,cn9132-clearfog",
+		     "solidrun,cn9132-sr-cex7", "marvell,cn9130";
+
+	aliases {
+		ethernet1 = &cp0_eth2;
+		ethernet2 = &cp0_eth0;
+		ethernet3 = &cp2_eth0;
+		ethernet4 = &cp1_eth0;
+		i2c7 = &carrier_mpcie_i2c;
+		i2c8 = &carrier_ptp_i2c;
+		mmc1 = &cp0_sdhci0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_wake0_pins>;
+
+		button-0 {
+			label = "SW2";
+			gpios = <&cp1_gpio2 8 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_batlow_pins &cp2_rsvd4_pins>;
+
+		/* LED11 */
+		led-io-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <0>;
+			default-state = "off";
+			gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED12 */
+		led-io-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			default-state = "off";
+			gpios = <&cp2_gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/* CON4 W_DISABLE1/W_DISABLE2 */
+	rfkill-m2-wlan {
+		compatible = "rfkill-gpio";
+		label = "m.2 wlan (CON4)";
+		radio-type = "wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_10g_phy_rst_01_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp1_gpio2 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* CON5 W_DISABLE1/W_DISABLE2 */
+	rfkill-m2-wlan {
+		compatible = "rfkill-gpio";
+		label = "m.2 wlan (CON5)";
+		radio-type = "wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_10g_phy_rst_23_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp1_gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* J21 W_DISABLE1 */
+	rfkill-m2-wwan {
+		compatible = "rfkill-gpio";
+		label = "m.2 wwan (J21)";
+		radio-type = "wwan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp2_rsvd3_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* J21 W_DISABLE1 */
+	rfkill-m2-gnss {
+		compatible = "rfkill-gpio";
+		label = "m.2 gnss (J21)";
+		radio-type = "gps";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp2_rsvd8_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp2_gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* J14 W_DISABLE */
+	rfkill-mpcie-wlan {
+		compatible = "rfkill-gpio";
+		label = "mpcie wlan (J14)";
+		radio-type = "wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp2_rsvd2_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&com_10g_sfp_i2c0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&com_10g_int0_pins>;
+		mod-def0-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&com_smbus {
+	/* This bus is also routed to STM32 BMC Microcontroller (U2) */
+
+	power-sensor@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		#io-channel-cells = <1>;
+		label = "vdd_12v0";
+		shunt-resistor = <2000>;
+	};
+
+	adc@48 {
+		compatible = "ti,tla2021";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* supplied by chaoskey hardware noise generator circuit */
+		channel@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&cp0_eth_phy0 {
+	/*
+	 * Configure LEDs default behaviour:
+	 * - LED[0]: link is 1000Mbps: On (yellow): 0111
+	 * - LED[1]: link/activity: On/Blink (green): 0001
+	 * - LED[2]: Off (green): 1000
+	 */
+	marvell,reg-init = <3 16 0xf000 0x0817>;
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			/* link */
+			reg = <0>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		led@1 {
+			/* act */
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		led@2 {
+			/* 1000 */
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
+
+/* SRDS #4 - 10GE */
+&cp0_eth0 {
+	phys = <&cp0_comphy4 0>;
+	phy-mode = "10gbase-r";
+	managed = "in-band-status";
+	sfp = <&sfp>;
+	status = "okay";
+};
+
+&cp0_eth2 {
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy5 2>;
+	status = "okay";
+
+	fixed-link {
+		speed = <2500>;
+		full-duplex;
+		pause;
+	};
+};
+
+&cp0_i2c1 {
+	/*
+	 * Both COM and Carrier Board have a PCA9547 i2c mux at 0x77.
+	 * Describe them as a single device merging each child bus.
+	 */
+
+	i2c-mux@77 {
+		i2c@0 {
+			/* Routed to Full PCIe (J4) */
+		};
+
+		i2c@1 {
+			/* Routed to USB Hub (U29) */
+		};
+
+		i2c@2 {
+			/* Routed to M.2 (CON4) */
+		};
+
+		i2c@3 {
+			/* Routed to M.2 (CON5) */
+		};
+
+		i2c@4 {
+			/* Routed to M.2 (J21) */
+		};
+
+		carrier_mpcie_i2c: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			/* Routed to mini-PCIe (J14) */
+		};
+
+		carrier_ptp_i2c: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			/* Routed to various optional PTP related components */
+		};
+	};
+};
+
+&cp0_mdio {
+	ethernet-switch@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sw_phy1: ethernet-phy@1 {
+				reg = <0x11>;
+			};
+
+			sw_phy2: ethernet-phy@2 {
+				reg = <0x12>;
+			};
+
+			sw_phy3: ethernet-phy@3 {
+				reg = <0x13>;
+			};
+
+			sw_phy4: ethernet-phy@4 {
+				reg = <0x14>;
+			};
+		};
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-handle = <&sw_phy1>;
+				phy-mode = "internal";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_YELLOW>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-handle = <&sw_phy2>;
+				phy-mode = "internal";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_YELLOW>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-handle = <&sw_phy3>;
+				phy-mode = "internal";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_YELLOW>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan4";
+				phy-handle = <&sw_phy4>;
+				phy-mode = "internal";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_YELLOW>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&cp0_eth2>;
+				phy-mode = "2500base-x";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+	};
+};
+
+/* SRDS #0,#1,#2,#3 - PCIe */
+&cp0_pcie0 {
+	num-lanes = <4>;
+	/*
+	 * The mvebu-comphy driver does not currently know how to pass correct
+	 * lane-count to ATF while configuring the serdes lanes.
+	 * Rely on bootloader configuration only.
+	 *
+	 * phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+	 */
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	/*
+	 * configure unused gpios exposed via pin headers:
+	 * - J7-10: PWRBTN
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pwrbtn_pins>;
+};
+
+/* microSD */
+&cp0_sdhci0 {
+	pinctrl-0 = <&cp0_mmc0_pins>, <&cp0_mmc0_cd_pins>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&cp0_spi1 {
+	/* add CS1 */
+	pinctrl-0 = <&cp0_spi1_pins>, <&cp0_spi1_cs1_pins>;
+
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		/* read command supports max. 50MHz */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+/* J38 */
+&cp0_uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_uart2_pins>;
+	status = "okay";
+};
+
+&cp0_utmi {
+	/* M.2 "CON5" swaps D+/D- */
+	swap-dx-lanes = <1>;
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* SRDS #2 - 5GE */
+&cp1_eth0 {
+	phys = <&cp1_comphy2 0>;
+	phy-mode = "5gbase-r";
+	phy = <&cp1_eth_phy0>;
+	managed = "in-band-status";
+	status = "okay";
+};
+
+/* SRDS #0,#1 - PCIe */
+&cp1_pcie0 {
+	num-lanes = <2>;
+	/*
+	 * The mvebu-comphy driver does not currently know how to pass correct
+	 * lane-count to ATF while configuring the serdes lanes.
+	 * Rely on bootloader configuration only.
+	 *
+	 * phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+	 */
+	status = "okay";
+};
+
+/* SRDS #4 - PCIe */
+&cp1_pcie1 {
+	num-lanes = <1>;
+	phys = <&cp1_comphy4 1>;
+	status = "okay";
+};
+
+/* SRDS #5 - PCIe */
+&cp1_pcie2 {
+	num-lanes = <1>;
+	phys = <&cp1_comphy5 2>;
+	status = "okay";
+};
+
+&cp1_pinctrl {
+	/*
+	 * configure unused gpios exposed via pin headers:
+	 * - J7-8: RSVD16
+	 * - J7-10: THRM
+	 * - J10-1: WAKE1
+	 * - J10-2: SATA_ACT
+	 * - J10-8: THERMTRIP
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_rsvd16_pins &cp1_sata_act_pins &cp1_thrm_irq_pins>,
+		    <&cp1_thrm_trip_pins &cp1_wake1_pins>;
+};
+
+/* SRDS #3 - SATA */
+&cp1_sata0 {
+	status = "okay";
+
+	/* only port 1 is available */
+	sata-port@1 {
+		phys = <&cp1_comphy3 1>;
+		status = "okay";
+	};
+};
+
+&cp1_utmi {
+	/* M.2 "CON4" swaps D+/D- */
+	swap-dx-lanes = <0>;
+};
+
+&cp1_xmdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_xmdio_pins>;
+	status = "okay";
+
+	cp1_eth_phy0: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&com_10g_int1_pins>;
+		interrupt-parent = <&cp1_gpio2>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&cp2_ethernet {
+	status = "okay";
+};
+
+/* SRDS #2 - 5GE */
+&cp2_eth0 {
+	phys = <&cp2_comphy2 0>;
+	phy-mode = "5gbase-r";
+	phy = <&cp2_eth_phy0>;
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&cp2_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_rsvd9_pins>;
+
+	/* J21 */
+	m2-wwan-reset-hog {
+		gpio-hog;
+		gpios = <9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		output-low;
+		line-name = "m2-wwan-reset";
+	};
+};
+
+/* SRDS #0 - PCIe */
+&cp2_pcie0 {
+	num-lanes = <1>;
+	phys = <&cp2_comphy0 0>;
+	status = "okay";
+};
+
+/* SRDS #4 - PCIe */
+&cp2_pcie1 {
+	num-lanes = <1>;
+	phys = <&cp2_comphy4 1>;
+	status = "okay";
+};
+
+/* SRDS #5 - PCIe */
+&cp2_pcie2 {
+	num-lanes = <1>;
+	phys = <&cp2_comphy5 2>;
+	status = "okay";
+};
+
+&cp2_pinctrl {
+	/*
+	 * configure unused gpios exposed via pin headers:
+	 * - J7-1: RSVD10
+	 * - J7-3: RSVD11
+	 * - J7-5: RSVD56
+	 * - J7-6: RSVD7
+	 * - J7-7: RSVD27
+	 * - J10-3: RSVD31
+	 * - J10-5: RSVD5
+	 * - J10-6: RSVD32
+	 * - J10-7: RSVD0
+	 * - J10-9: RSVD1
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_rsvd0_pins &cp2_rsvd1_pins &cp2_rsvd5_pins>,
+		    <&cp2_rsvd7_pins &cp2_rsvd10_pins &cp2_rsvd11_pins>,
+		    <&cp2_rsvd27_pins &cp2_rsvd31_pins &cp2_rsvd32_pins>,
+		    <&cp2_rsvd56_pins>;
+};
+
+/* SRDS #3 - SATA */
+&cp2_sata0 {
+	status = "okay";
+
+	/* only port 1 is available */
+	sata-port@1 {
+		status = "okay";
+		phys = <&cp2_comphy3 1>;
+	};
+};
+
+&cp2_xmdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_xmdio_pins>;
+	status = "okay";
+
+	cp2_eth_phy0: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&com_10g_int2_pins>;
+		interrupt-parent = <&cp2_gpio2>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
index 512a4fa2861e..f91fc69905b8 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
@@ -17,7 +17,7 @@
 		ethernet5 = &cp2_eth0;
 	};
 
-	cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+	cp2_reg_usb3_vbus0: regulator-7 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp2-xhci0-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -26,12 +26,12 @@
 		gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp2_usb3_0_phy0: cp2_usb3_phy0 {
+	cp2_usb3_0_phy0: usb-phy-4 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp2_reg_usb3_vbus0>;
 	};
 
-	cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+	cp2_reg_usb3_vbus1: regulator-8 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp2-xhci1-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -40,12 +40,12 @@
 		gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp2_usb3_0_phy1: cp2_usb3_phy1 {
+	cp2_usb3_0_phy1: usb-phy-5 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp2_reg_usb3_vbus1>;
 	};
 
-	cp2_reg_sd_vccq: cp2_sd_vccq@0 {
+	cp2_reg_sd_vccq: regulator-9 {
 		compatible = "regulator-gpio";
 		regulator-name = "cp2_sd_vcc";
 		regulator-min-microvolt = <1800000>;
@@ -54,7 +54,7 @@
 		states = <1800000 0x1 3300000 0x0>;
 	};
 
-	cp2_sfp_eth0: sfp-eth0 {
+	cp2_sfp_eth0: sfp-eth-3 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp2_sfpp0_i2c>;
 		los-gpios = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
@@ -175,6 +175,7 @@
 	sata-port@0 {
 		/* Generic PHY, providing serdes lanes */
 		phys = <&cp2_comphy2 0>;
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
new file mode 100644
index 000000000000..91ba5f7dc9b4
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
@@ -0,0 +1,720 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/*
+ * Instantiate the first external CP115
+ */
+
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/*
+ * Instantiate the second external CP115
+ */
+
+#define CP11X_NAME		cp2
+#define CP11X_BASE		f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f6600000
+#define CP11X_PCIE1_BASE	f6620000
+#define CP11X_PCIE2_BASE	f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/ {
+	model = "SolidRun CN9132 COM Express Type 7 Module";
+	compatible = "solidrun,cn9132-sr-cex7", "marvell,cn9130";
+
+	aliases {
+		ethernet0 = &cp0_eth1;
+		gpio3 = &cp1_gpio1;
+		gpio4 = &cp1_gpio2;
+		gpio5 = &cp2_gpio1;
+		gpio6 = &cp2_gpio2;
+		i2c0 = &cp0_i2c0;
+		i2c1 = &cp0_i2c1;
+		i2c2 = &com_clkgen_i2c;
+		i2c3 = &com_10g_led_i2c;
+		i2c4 = &com_10g_sfp_i2c0;
+		i2c5 = &com_smbus;
+		i2c6 = &com_fanctrl_i2c;
+		mmc0 = &ap_sdhci0;
+		rtc0 = &cp0_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 51 102 153 204 255>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_fan_pwm_pins &cp0_fan_tacho_pins>;
+		pwms = <&cp0_gpio2 7 40000>;
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	v_1_8: regulator-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	ap_vhv: regulator-ap-vhv-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "ap-vhv-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-0 = <&cp0_reg_ap_vhv_pins>;
+		pinctrl-names = "default";
+		gpios = <&cp0_gpio2 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cp_vhv: regulator-cp-vhv-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp-vhv-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-0 = <&cp0_reg_cp_vhv_pins>;
+		pinctrl-names = "default";
+		gpios = <&cp0_gpio2 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ap_pinctrl {
+	ap_mmc0_pins: ap-mmc0-pins {
+		marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5",
+					   "mpp6", "mpp7", "mpp8", "mpp9", "mpp10", "mpp12";
+		marvell,function = "sdio";
+		/*
+		 * mpp12 is emmc reset, function should be sdio (hw_rst),
+		 * but pinctrl-mvebu does not support this.
+		 *
+		 * From pinctrl-mvebu.h:
+		 * "The name will be used to switch to this setting in DT description, e.g.
+		 * marvell,function = "uart2". subname is only for debugging purposes."
+		 */
+	};
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	pinctrl-0 = <&ap_mmc0_pins>;
+	pinctrl-names = "default";
+	vqmmc-supply = <&v_1_8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so disable
+	 * UHS (by preventing voltage switch), SDR104, SDR50 and DDR50 modes.
+	 */
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&ap_thermal_ic {
+	polling-delay = <1000>;
+
+	trips {
+		ap_active: trip-active {
+			temperature = <40000>;
+			hysteresis = <4000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&ap_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+
+		map1 {
+			trip = <&ap_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_eth1_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&cp0_eth_phy0>;
+	status = "okay";
+};
+
+&cp0_gpio1 {
+	status = "okay";
+
+	/*
+	 * Tacho signal used as interrupt source by pwm-fan driver.
+	 * Hog IO as input to ensure mvebu-gpio irq driver`s
+	 * irq_set_type can succeed.
+	 */
+	pwm-tacho-irq-hog {
+		gpio-hog;
+		gpios = <26 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		input;
+		line-name = "fan-tacho";
+	};
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	com_eeprom: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,spd";
+		reg = <0x53>;
+	};
+};
+
+&cp0_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		com_clkgen_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			/* clock-controller@6b */
+		};
+
+		com_10g_led_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			/* Routed to B2B Connector as I2C_10G_LED_SCL/SDA */
+		};
+
+		com_10g_sfp_i2c0: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			/* Routed to B2B Connector as I2C_SFP0_CP0_SCL/SDA */
+		};
+
+		com_smbus: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			/* Routed to B2B Connector as SBM_CLK/DAT */
+		};
+
+		com_fanctrl_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			/* fan-controller@2f (assembly option) */
+		};
+	};
+};
+
+&cp0_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_mdio_pins>;
+	status = "okay";
+
+	cp0_eth_phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		/* read command supports max. 50MHz */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		com_10g_int0_pins: cp0-10g-int-pins {
+			marvell,pins = "mpp24";
+			marvell,function = "gpio";
+		};
+
+		cp0_eth1_pins: cp0-eth1-pins {
+			marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+				       "mpp4", "mpp5", "mpp6", "mpp7",
+				       "mpp8", "mpp9", "mpp10", "mpp11";
+			/* docs call it "ge1", but cp110-pinctrl "ge0" */
+			marvell,function = "ge0";
+		};
+
+		cp0_fan_pwm_pins: cp0-fan-pwm-pins {
+			marvell,pins = "mpp39";
+			marvell,function = "gpio";
+		};
+
+		cp0_fan_tacho_pins: cp0-fan-tacho-pins {
+			marvell,pins = "mpp26";
+			marvell,function = "gpio";
+		};
+
+		cp0_i2c0_pins: cp0-i2c0-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+
+		cp0_i2c1_pins: cp0-i2c1-pins {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+
+		cp0_mdio_pins: cp0-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+
+		cp0_mmc0_pins: cp0-mmc0-pins {
+			marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59",
+				       "mpp60", "mpp61";
+			marvell,function = "sdio";
+		};
+
+		cp0_mmc0_cd_pins: cp0-mmc0-cd-pins {
+			marvell,pins = "mpp55";
+			marvell,function = "sdio_cd";
+		};
+
+		cp0_pwrbtn_pins:  cp0-pwrbtn-pins {
+			marvell,pins = "mpp31";
+			marvell,function = "gpio";
+		};
+
+		cp0_reg_ap_vhv_pins: cp0-reg-ap-vhv-pins {
+			marvell,pins = "mpp53";
+			marvell,function = "gpio";
+		};
+
+		cp0_reg_cp_vhv_pins: cp0-reg-cp-vhv-pins {
+			marvell,pins = "mpp49";
+			marvell,function = "gpio";
+		};
+
+		cp0_spi1_pins: cp0-spi1-pins {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+
+		cp0_spi1_cs1_pins: cp0-spi1-cs1-pins {
+			marvell,pins = "mpp12";
+			marvell,function = "spi1";
+		};
+
+		cp0_uart2_pins: cp0-uart2-pins  {
+			marvell,pins = "mpp50", "mpp51";
+			marvell,function = "uart2";
+		};
+	};
+};
+
+&cp0_thermal_ic {
+	polling-delay = <1000>;
+
+	trips {
+		cp0_active: trip-active {
+			temperature = <40000>;
+			hysteresis = <4000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cp0_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+
+		map1 {
+			trip = <&cp0_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+/* USB-2.0 Host */
+&cp0_usb3_0 {
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* USB-2.0 Host */
+&cp0_usb3_1 {
+	phys = <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp1_gpio1 {
+	status = "okay";
+};
+
+&cp1_gpio2 {
+	status = "okay";
+};
+
+&cp1_rtc {
+	status = "disabled";
+};
+
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi1_pins>;
+	status = "okay";
+
+	tpm@0 {
+		reg = <0>;
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		spi-max-frequency = <10000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_tpm_irq_pins>;
+		interrupt-parent = <&cp1_gpio1>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		com_10g_int1_pins: cp1-10g-int-pins {
+			marvell,pins = "mpp50";
+			marvell,function = "gpio";
+		};
+
+		cp1_10g_phy_rst_01_pins: cp1-10g-phy-rst-01-pins {
+			marvell,pins = "mpp43";
+			marvell,function = "gpio";
+		};
+
+		cp1_10g_phy_rst_23_pins: cp1-10g-phy-rst-23-pins {
+			marvell,pins = "mpp42";
+			marvell,function = "gpio";
+		};
+
+		cp1_batlow_pins: cp1-batlow-pins {
+			marvell,pins = "mpp11";
+			marvell,function = "gpio";
+		};
+
+		cp1_rsvd16_pins: cp1-rsvd16-pins {
+			marvell,pins = "mpp29";
+			marvell,function = "gpio";
+		};
+
+		cp1_sata_act_pins: cp1-sata-act-pins {
+			marvell,pins = "mpp39";
+			marvell,function = "gpio";
+		};
+
+		cp1_spi1_pins: cp1-spi1-pins {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+
+		cp1_thrm_irq_pins: cp1-thrm-irq-pins {
+			marvell,pins = "mpp34";
+			marvell,function = "gpio";
+		};
+
+		cp1_thrm_trip_pins: cp1-thrm-trip-pins {
+			marvell,pins = "mpp33";
+			marvell,function = "gpio";
+		};
+
+		cp1_tpm_irq_pins: cp1-tpm-irq-pins {
+			marvell,pins = "mpp17";
+			marvell,function = "gpio";
+		};
+
+		cp1_wake0_pins: cp1-wake0-pins {
+			marvell,pins = "mpp40";
+			marvell,function = "gpio";
+		};
+
+		cp1_wake1_pins: cp1-wake1-pins {
+			marvell,pins = "mpp51";
+			marvell,function = "gpio";
+		};
+
+		cp1_xmdio_pins: cp1-xmdio-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "xg";
+		};
+	};
+};
+
+&cp1_thermal_ic {
+	polling-delay = <1000>;
+
+	trips {
+		cp1_active: trip-active {
+			temperature = <40000>;
+			hysteresis = <4000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cp1_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+
+		map1 {
+			trip = <&cp1_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+/* USB-2.0 Host */
+&cp1_usb3_0 {
+	phys = <&cp1_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp1_utmi {
+	status = "okay";
+};
+
+&cp2_ethernet {
+	status = "okay";
+};
+
+&cp2_gpio1 {
+	status = "okay";
+};
+
+&cp2_gpio2 {
+	status = "okay";
+};
+
+&cp2_rtc {
+	status = "disabled";
+};
+
+&cp2_syscon0 {
+	cp2_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		com_10g_int2_pins: cp2-10g-int-pins {
+			marvell,pins = "mpp50";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd0_pins: cp2-rsvd0-pins {
+			marvell,pins = "mpp0";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd1_pins: cp2-rsvd1-pins {
+			marvell,pins = "mpp1";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd2_pins: cp2-rsvd2-pins {
+			marvell,pins = "mpp2";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd3_pins: cp2-rsvd3-pins {
+			marvell,pins = "mpp3";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd4_pins: cp2-rsvd4-pins {
+			marvell,pins = "mpp4";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd5_pins: cp2-rsvd5-pins {
+			marvell,pins = "mpp54";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd7_pins: cp2-rsvd7-pins {
+			marvell,pins = "mpp7";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd8_pins: cp2-rsvd8-pins {
+			marvell,pins = "mpp8";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd9_pins: cp2-rsvd9-pins {
+			marvell,pins = "mpp9";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd10_pins: cp2-rsvd10-pins {
+			marvell,pins = "mpp10";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd11_pins: cp2-rsvd11-pins {
+			marvell,pins = "mpp11";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd27_pins: cp2-rsvd27-pins {
+			marvell,pins = "mpp11";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd31_pins: cp2-rsvd31-pins {
+			marvell,pins = "mpp31";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd32_pins: cp2-rsvd32-pins {
+			marvell,pins = "mpp32";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd55_pins: cp2-rsvd55-pins {
+			marvell,pins = "mpp55";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd56_pins: cp2-rsvd56-pins {
+			marvell,pins = "mpp56";
+			marvell,function = "gpio";
+		};
+
+		cp2_xmdio_pins: cp2-xmdio-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "xg";
+		};
+	};
+};
+
+&cp2_thermal_ic {
+	polling-delay = <1000>;
+
+	trips {
+		cp2_active: trip-active {
+			temperature = <40000>;
+			hysteresis = <4000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cp2_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+
+		map1 {
+			trip = <&cp2_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+/* USB-2.0/3.0 Host */
+&cp2_usb3_0 {
+	phys = <&cp2_utmi0>, <&cp2_comphy1 0>;
+	phy-names = "utmi", "comphy";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp2_utmi {
+	status = "okay";
+};
+
+/* AP default console */
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/mmp/Makefile b/arch/arm64/boot/dts/marvell/mmp/Makefile
new file mode 100644
index 000000000000..103175ed63b0
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/mmp/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MMP) += pxa1908-samsung-coreprimevelte.dtb
diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
new file mode 100644
index 000000000000..47a4f01a7077
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "pxa1908.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Samsung Galaxy Core Prime VE LTE";
+	compatible = "samsung,coreprimevelte", "marvell,pxa1908";
+
+	aliases {
+		mmc0 = &sdh2; /* eMMC */
+		mmc1 = &sdh0; /* SD card */
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		fb0: framebuffer@17177000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x17177000 0 (480 * 800 * 4)>;
+			width = <480>;
+			height = <800>;
+			stride = <(480 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	/* Bootloader fills this in */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0 0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@17000000 {
+			reg = <0 0x17000000 0 0x1800000>;
+			no-map;
+		};
+
+		gpu@9000000 {
+			reg = <0 0x9000000 0 0x1000000>;
+		};
+
+		/* Communications processor, aka modem */
+		cp@5000000 {
+			reg = <0 0x5000000 0 0x3000000>;
+		};
+
+		cm3@a000000 {
+			reg = <0 0xa000000 0 0x80000>;
+		};
+
+		seclog@8000000 {
+			reg = <0 0x8000000 0 0x100000>;
+		};
+
+		ramoops@8100000 {
+			compatible = "ramoops";
+			reg = <0 0x8100000 0 0x40000>;
+			record-size = <0x8000>;
+			console-size = <0x20000>;
+			max-reason = <5>;
+		};
+	};
+
+	i2c-muic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <3>;
+		i2c-gpio,timeout-ms = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_muic_pins>;
+
+		muic: extcon@14 {
+			compatible = "siliconmitus,sm5504-muic";
+			reg = <0x14>;
+			interrupt-parent = <&gpio>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio 50 GPIO_ACTIVE_LOW>;
+		};
+
+		key-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+
+		key-voldown {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&smmu {
+	status = "okay";
+};
+
+&pmx {
+	pinctrl-single,gpio-range = <&range 55 55 0>,
+				    <&range 110 32 0>,
+				    <&range 52 1 0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&board_pins_0 &board_pins_1 &board_pins_2>;
+
+	board_pins_0: board-pins-0 {
+		pinctrl-single,pins = <
+			0x160 0
+			0x164 0
+			0x168 0
+			0x16c 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	board_pins_1: board-pins-1 {
+		pinctrl-single,pins = <
+			0x44 1
+			0x48 1
+			0x20 1
+			0x18 1
+			0x14 1
+			0x10 1
+			0xc 1
+			0x8 1
+			0x68 1
+			0x58 0
+			0x54 0
+			0x7c 0
+			0x6c 0
+			0x70 0
+			0x4c 1
+			0x50 1
+			0xac 0
+			0x90 0
+			0x8c 0
+			0x88 0
+			0x84 0
+			0xc8 0
+			0x128 0
+			0x190 0
+			0x194 0
+			0x1a0 0
+			0x114 0
+			0x118 0
+			0x1d8 0
+			0x1e4 0
+			0xe8 0
+			0x100 0
+			0x204 0
+			0x210 0
+			0x218 0
+		>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xc000>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	board_pins_2: board-pins-2 {
+		pinctrl-single,pins = <
+			0x260 0
+			0x264 0
+			0x268 0
+			0x26c 0
+			0x270 0
+			0x274 0
+			0x78 0
+			0x74 0
+			0xb0 1
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	uart0_pins: uart0-pins {
+		pinctrl-single,pins = <
+			0x198 6
+			0x19c 6
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	gpio_keys_pins: gpio-keys-pins {
+		pinctrl-single,pins = <
+			0x11c 0
+			0x120 0
+			0x1a4 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa0000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	i2c_muic_pins: i2c-muic-pins {
+		pinctrl-single,pins = <
+			0x154 0
+			0x150 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	sdh0_pins_0: sdh0-pins-0 {
+		pinctrl-single,pins = <
+			0x108 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh0_pins_1: sdh0-pins-1 {
+		pinctrl-single,pins = <
+			0x94 0
+			0x98 0
+			0x9c 0
+			0xa0 0
+			0xa4 0
+		>;
+		pinctrl-single,drive-strength = <0x800 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh0_pins_2: sdh0-pins-2 {
+		pinctrl-single,pins = <
+			0xa8 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&twsi0 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+};
+
+&twsi2 {
+	status = "okay";
+};
+
+&twsi3 {
+	status = "okay";
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+};
+
+&sdh2 {
+	/* Disabled for now because initialization fails with -ETIMEDOUT. */
+	status = "disabled";
+	bus-width = <8>;
+	non-removable;
+	mmc-ddr-1_8v;
+};
+
+&sdh0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdh0_pins_0 &sdh0_pins_1 &sdh0_pins_2>;
+	cd-gpios = <&gpio 11 0>;
+	cd-inverted;
+	bus-width = <4>;
+	wp-inverted;
+};
diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
new file mode 100644
index 000000000000..cf2b9109688c
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+/ {
+	model = "Marvell Armada PXA1908";
+	compatible = "marvell,pxa1908";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 3>;
+			enable-method = "psci";
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smmu: iommu@c0010000 {
+			compatible = "arm,mmu-400";
+			reg = <0 0xc0010000 0 0x10000>;
+			#global-interrupts = <1>;
+			#iommu-cells = <1>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@d1df9000 {
+			compatible = "arm,gic-400";
+			reg = <0 0xd1df9000 0 0x1000>,
+				<0 0xd1dfa000 0 0x2000>,
+				/* The subsequent registers are guesses. */
+				<0 0xd1dfc000 0 0x2000>,
+				<0 0xd1dfe000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apb@d4000000 {
+			compatible = "simple-bus";
+			reg = <0 0xd4000000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xd4000000 0x200000>;
+
+			pdma: dma-controller@0 {
+				compatible = "marvell,pdma-1.0";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <30>;
+				#dma-cells = <2>;
+			};
+
+			twsi1: i2c@10800 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x10800 0x64>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI1>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi0: i2c@11000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x11000 0x64>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi3: i2c@13800 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x13800 0x64>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI3>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			apbc: clock-controller@15000 {
+				compatible = "marvell,pxa1908-apbc";
+				reg = <0x15000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			uart0: serial@17000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x17000 0x1000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_UART0>;
+				reg-shift = <2>;
+			};
+
+			uart1: serial@18000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x18000 0x1000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_UART1>;
+				reg-shift = <2>;
+			};
+
+			gpio: gpio@19000 {
+				compatible = "marvell,mmp-gpio";
+				reg = <0x19000 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&apbc PXA1908_CLK_GPIO>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges = <0 0x19000 0x800>;
+
+				gpio@0 {
+					reg = <0x0 0x4>;
+				};
+
+				gpio@4 {
+					reg = <0x4 0x4>;
+				};
+
+				gpio@8 {
+					reg = <0x8 0x4>;
+				};
+
+				gpio@100 {
+					reg = <0x100 0x4>;
+				};
+			};
+
+			pmx: pinmux@1e000 {
+				compatible = "marvell,pxa1908-padconf", "pinconf-single";
+				reg = <0x1e000 0x330>;
+
+				#pinctrl-cells = <1>;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <7>;
+
+				range: gpio-range {
+					#pinctrl-single,gpio-range-cells = <3>;
+				};
+			};
+
+			uart2: serial@36000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x36000 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbcp PXA1908_CLK_UART2>;
+				reg-shift = <2>;
+			};
+
+			twsi2: i2c@37000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x37000 0x64>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbcp PXA1908_CLK_TWSI2>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			apbcp: clock-controller@3b000 {
+				compatible = "marvell,pxa1908-apbcp";
+				reg = <0x3b000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			mpmu: clock-controller@50000 {
+				compatible = "marvell,pxa1908-mpmu";
+				reg = <0x50000 0x1000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		axi@d4200000 {
+			compatible = "simple-bus";
+			reg = <0 0xd4200000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xd4200000 0x200000>;
+
+			usbphy: phy@7000 {
+				compatible = "marvell,pxa1928-usb-phy";
+				reg = <0x7000 0x200>;
+				clocks = <&apmu PXA1908_CLK_USB>;
+				#phy-cells = <0>;
+			};
+
+			usb: usb@8000 {
+				compatible = "chipidea,usb2";
+				reg = <0x8000 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_USB>;
+				phys = <&usbphy>;
+				phy-names = "usb-phy";
+			};
+
+			sdh0: mmc@80000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x80000 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH0>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			sdh1: mmc@80800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x80800 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH1>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			sdh2: mmc@81000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x81000 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH2>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			apmu: clock-controller@82800 {
+				compatible = "marvell,pxa1908-apmu";
+				reg = <0x82800 0x400>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index e6e7592a3645..a4df4c21399e 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -8,13 +8,23 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-cudy-wr3000-v1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-openwrt-one.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-xiaomi-ax3000t.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-acelink-ew-7886cax.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-mini.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sata.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-2g5.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-emmc.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-sd.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
@@ -32,10 +42,16 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel14-sku2.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-juniper-sku16.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kappa.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kenzo.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico6.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu-sku22.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku32.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku38.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku288.dtb
@@ -43,17 +59,56 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-chinchou-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-chinchou-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-chinchou-sku16.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393216.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393217.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393218.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-ponyta-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-ponyta-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-rusty-sku196608.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-squirtle.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-starmie-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-starmie-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131073.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-voltorb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku2.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku3.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku4.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku5.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku6.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku7.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r4.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-dojo-r1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-genio-510-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-kontron-3-5-sbc-i1200.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l-8-hd-panel.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
+
+# Device tree overlays support
+DTC_FLAGS_mt7986a-bananapi-bpi-r3 := -@
+DTC_FLAGS_mt7986a-bananapi-bpi-r3-mini := -@
+DTC_FLAGS_mt7988a-bananapi-bpi-r4 := -@
+DTC_FLAGS_mt7988a-bananapi-bpi-r4-2g5 := -@
+DTC_FLAGS_mt8395-radxa-nio-12l := -@
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index fffdb7bbf889..0449686bd06b 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -43,12 +43,12 @@
 
 	extcon_usb: extcon_iddig {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb1: extcon_iddig1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
 	};
 
 	usb_p0_vbus: regulator-usb-p0-vbus {
@@ -115,6 +115,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&eth_default>;
 	pinctrl-1 = <&eth_sleep>;
+	mediatek,mac-wol;
 	status = "okay";
 
 	mdio {
@@ -129,7 +130,7 @@
 };
 
 &pio {
-	eth_default: eth_default {
+	eth_default: eth-default-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>,
@@ -137,7 +138,7 @@
 				 <MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>,
 				 <MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>,
 				 <MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 		};
 		rx_pins {
 			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>,
@@ -151,12 +152,12 @@
 		mdio_pins {
 			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>,
 				 <MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			input-enable;
 		};
 	};
 
-	eth_sleep: eth_sleep {
+	eth_sleep: eth-sleep-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>,
@@ -182,14 +183,14 @@
 		};
 	};
 
-	usb0_id_pins_float: usb0_iddig {
+	usb0_id_pins_float: usb0-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
 			bias-pull-up;
 		};
 	};
 
-	usb1_id_pins_float: usb1_iddig {
+	usb1_id_pins_float: usb1-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>;
 			bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index ed1a9d319415..082672efba0a 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -249,10 +249,11 @@
 		#clock-cells = <1>;
 	};
 
-	infracfg: syscon@10001000 {
+	infracfg: clock-controller@10001000 {
 		compatible = "mediatek,mt2712-infracfg", "syscon";
 		reg = <0 0x10001000 0 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	pericfg: syscon@10003000 {
@@ -261,7 +262,7 @@
 		#clock-cells = <1>;
 	};
 
-	syscfg_pctl_a: syscfg_pctl_a@10005000 {
+	syscfg_pctl_a: syscon@10005000 {
 		compatible = "mediatek,mt2712-pctl-a-syscfg", "syscon";
 		reg = <0 0x10005000 0 0x1000>;
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt6331.dtsi b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
index d89858c73ab1..243afbffa21f 100644
--- a/arch/arm64/boot/dts/mediatek/mt6331.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
@@ -6,12 +6,12 @@
 #include <dt-bindings/input/input.h>
 
 &pwrap {
-	pmic: mt6331 {
+	pmic: pmic {
 		compatible = "mediatek,mt6331";
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		mt6331regulator: mt6331regulator {
+		mt6331regulator: regulators {
 			compatible = "mediatek,mt6331-regulator";
 
 			mt6331_vdvfs11_reg: buck-vdvfs11 {
@@ -258,7 +258,7 @@
 			};
 
 			mt6331_vdig18_reg: ldo-vdig18 {
-				regulator-name = "dvdd18_dig";
+				regulator-name = "vdig18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <0>;
@@ -266,11 +266,11 @@
 			};
 		};
 
-		mt6331rtc: mt6331rtc {
+		mt6331rtc: rtc {
 			compatible = "mediatek,mt6331-rtc";
 		};
 
-		mt6331keys: mt6331keys {
+		mt6331keys: keys {
 			compatible = "mediatek,mt6331-keys";
 			power {
 				linux,keycodes = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6357.dtsi b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
index 3330a03c2f74..dca4e5c3d8e2 100644
--- a/arch/arm64/boot/dts/mediatek/mt6357.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
@@ -10,6 +10,11 @@
 	mt6357_pmic: pmic {
 		compatible = "mediatek,mt6357";
 
+		pmic_adc: adc {
+			compatible = "mediatek,mt6357-auxadc";
+			#io-channel-cells = <1>;
+		};
+
 		regulators {
 			mt6357_vproc_reg: buck-vproc {
 				regulator-name = "vproc";
@@ -55,7 +60,6 @@
 			};
 
 			mt6357_vfe28_reg: ldo-vfe28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vfe28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -70,7 +74,6 @@
 			};
 
 			mt6357_vrf18_reg: ldo-vrf18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -78,7 +81,6 @@
 			};
 
 			mt6357_vrf12_reg: ldo-vrf12 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -107,7 +109,6 @@
 			};
 
 			mt6357_vcn28_reg: ldo-vcn28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -115,7 +116,6 @@
 			};
 
 			mt6357_vcn18_reg: ldo-vcn18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -137,7 +137,6 @@
 			};
 
 			mt6357_vcamio_reg: ldo-vcamio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -170,7 +169,6 @@
 			};
 
 			mt6357_vaux18_reg: ldo-vaux18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaux18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -178,7 +176,6 @@
 			};
 
 			mt6357_vaud28_reg: ldo-vaud28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaud28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -186,7 +183,6 @@
 			};
 
 			mt6357_vio28_reg: ldo-vio28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -194,7 +190,6 @@
 			};
 
 			mt6357_vio18_reg: ldo-vio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
index b605313bed99..e23672a2eea4 100644
--- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -8,16 +8,19 @@
 	pmic: pmic {
 		compatible = "mediatek,mt6358";
 		interrupt-controller;
-		interrupt-parent = <&pio>;
-		interrupts = <182 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 
-		mt6358codec: mt6358codec {
+		pmic_adc: adc {
+			compatible = "mediatek,mt6358-auxadc";
+			#io-channel-cells = <1>;
+		};
+
+		mt6358codec: audio-codec {
 			compatible = "mediatek,mt6358-sound";
 			mediatek,dmic-mode = <0>; /* two-wires */
 		};
 
-		mt6358regulator: mt6358regulator {
+		mt6358regulator: regulators {
 			compatible = "mediatek,mt6358-regulator";
 
 			mt6358_vdram1_reg: buck_vdram1 {
@@ -128,7 +131,6 @@
 			};
 
 			mt6358_vrf12_reg: ldo_vrf12 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -136,7 +138,6 @@
 			};
 
 			mt6358_vio18_reg: ldo_vio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -153,7 +154,6 @@
 			};
 
 			mt6358_vcamio_reg: ldo_vcamio {
-				compatible = "regulator-fixed";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -168,7 +168,6 @@
 			};
 
 			mt6358_vcn18_reg: ldo_vcn18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -176,7 +175,6 @@
 			};
 
 			mt6358_vfe28_reg: ldo_vfe28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vfe28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -193,7 +191,6 @@
 			};
 
 			mt6358_vcn28_reg: ldo_vcn28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -218,7 +215,6 @@
 			};
 
 			mt6358_vxo22_reg: ldo_vxo22 {
-				compatible = "regulator-fixed";
 				regulator-name = "vxo22";
 				regulator-min-microvolt = <2200000>;
 				regulator-max-microvolt = <2200000>;
@@ -234,7 +230,6 @@
 			};
 
 			mt6358_vaux18_reg: ldo_vaux18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaux18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -249,7 +244,6 @@
 			};
 
 			mt6358_vbif28_reg: ldo_vbif28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vbif28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -280,7 +274,6 @@
 			};
 
 			mt6358_vio28_reg: ldo_vio28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -288,7 +281,6 @@
 			};
 
 			mt6358_va12_reg: ldo_va12 {
-				compatible = "regulator-fixed";
 				regulator-name = "va12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -297,22 +289,14 @@
 			};
 
 			mt6358_vrf18_reg: ldo_vrf18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-enable-ramp-delay = <120>;
 			};
 
-			mt6358_vcn33_bt_reg: ldo_vcn33_bt {
-				regulator-name = "vcn33_bt";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3500000>;
-				regulator-enable-ramp-delay = <270>;
-			};
-
-			mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
-				regulator-name = "vcn33_wifi";
+			mt6358_vcn33_reg: ldo_vcn33 {
+				regulator-name = "vcn33";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3500000>;
 				regulator-enable-ramp-delay = <270>;
@@ -340,7 +324,6 @@
 			};
 
 			mt6358_vaud28_reg: ldo_vaud28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaud28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6359.dtsi b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
index df3e822232d3..467d8a4c2aa7 100644
--- a/arch/arm64/boot/dts/mediatek/mt6359.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
@@ -8,11 +8,20 @@
 		compatible = "mediatek,mt6359";
 		interrupt-controller;
 		#interrupt-cells = <2>;
+		#sound-dai-cells = <1>;
 
-		mt6359codec: mt6359codec {
+		pmic_adc: adc {
+			compatible = "mediatek,mt6359-auxadc";
+			#io-channel-cells = <1>;
+		};
+
+		mt6359codec: audio-codec {
+			compatible = "mediatek,mt6359-codec";
 		};
 
 		regulators {
+			compatible = "mediatek,mt6359-regulator";
+
 			mt6359_vs1_buck_reg: buck_vs1 {
 				regulator-name = "vs1";
 				regulator-min-microvolt = <800000>;
@@ -291,7 +300,7 @@
 			};
 		};
 
-		mt6359rtc: mt6359rtc {
+		mt6359rtc: rtc {
 			compatible = "mediatek,mt6358-rtc";
 		};
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt6755.dtsi b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
index b55d3fac9bd4..8da5c0a56a02 100644
--- a/arch/arm64/boot/dts/mediatek/mt6755.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
@@ -98,7 +98,7 @@
 			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	sysirq: intpol-controller@10200620 {
+	sysirq: interrupt-controller@10200620 {
 		compatible = "mediatek,mt6755-sysirq",
 			     "mediatek,mt6577-sysirq";
 		interrupt-controller;
diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
index 5c579e88e749..70f3375916e8 100644
--- a/arch/arm64/boot/dts/mediatek/mt6779.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -138,7 +138,7 @@
 
 		};
 
-		sysirq: intpol-controller@c53a650 {
+		sysirq: interrupt-controller@c53a650 {
 			compatible = "mediatek,mt6779-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
index 7364c7278276..fccb948cfa45 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -212,7 +212,7 @@
 
 &mmc0 {
 	/* eMMC controller */
-	mediatek,latch-ck = <0x14>; /* hs400 */
+	mediatek,latch-ck = <4>; /* hs400 */
 	mediatek,hs200-cmd-int-delay = <1>;
 	mediatek,hs400-cmd-int-delay = <1>;
 	mediatek,hs400-ds-dly3 = <0x1a>;
@@ -227,6 +227,8 @@
 
 &mmc1 {
 	/* MicroSD card slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
 	vmmc-supply = <&mt6331_vmc_reg>;
 	vqmmc-supply = <&mt6331_vmch_reg>;
 	status = "okay";
@@ -234,6 +236,8 @@
 
 &mmc2 {
 	/* SDIO WiFi on MMC2 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
 	vmmc-supply = <&mt6331_vmc_reg>;
 	vqmmc-supply = <&mt6331_vmch_reg>;
 	status = "okay";
@@ -288,25 +292,59 @@
 				 <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-clk {
 			pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-rst {
 			pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-ds {
 			pinmux = <PINMUX_GPIO164__FUNC_MSDC0_DSL>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc1_pins_default: microsd-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO171__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO172__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO173__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO174__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO170__FUNC_MSDC1_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO175__FUNC_MSDC1_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc2_pins_default: sdio-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO100__FUNC_MSDC2_DAT0>,
+				 <PINMUX_GPIO101__FUNC_MSDC2_DAT1>,
+				 <PINMUX_GPIO102__FUNC_MSDC2_DAT2>,
+				 <PINMUX_GPIO103__FUNC_MSDC2_DAT3>,
+				 <PINMUX_GPIO105__FUNC_MSDC2_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO104__FUNC_MSDC2_CLK>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index e5e269a660b1..58833e5135c8 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -404,7 +404,7 @@
 			clock-names = "spi", "wrap";
 		};
 
-		sysirq: intpol-controller@10200620 {
+		sysirq: interrupt-controller@10200620 {
 			compatible = "mediatek,mt6795-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
@@ -427,6 +427,7 @@
 			clocks = <&infracfg CLK_INFRA_M4U>;
 			clock-names = "bclk";
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,infracfg = <&infracfg>;
 			mediatek,larbs = <&larb0 &larb1 &larb2 &larb3>;
 			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
 			#iommu-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index c3677d77e0a4..8ac98a378fd6 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -117,7 +117,7 @@
 		#clock-cells = <1>;
 	};
 
-	infrasys: infracfg_ao@10001000 {
+	infrasys: syscon@10001000 {
 		compatible = "mediatek,mt6797-infracfg", "syscon";
 		reg = <0 0x10001000 0 0x1000>;
 		#clock-cells = <1>;
@@ -135,71 +135,71 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		uart0_pins_a: uart0 {
-			pins0 {
+		uart0_pins_a: uart0-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO234__FUNC_UTXD0>,
 					 <MT6797_GPIO235__FUNC_URXD0>;
 			};
 		};
 
-		uart1_pins_a: uart1 {
-			pins1 {
+		uart1_pins_a: uart1-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO232__FUNC_URXD1>,
 					 <MT6797_GPIO233__FUNC_UTXD1>;
 			};
 		};
 
-		i2c0_pins_a: i2c0 {
-			pins0 {
+		i2c0_pins_a: i2c0-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO37__FUNC_SCL0_0>,
 					 <MT6797_GPIO38__FUNC_SDA0_0>;
 			};
 		};
 
-		i2c1_pins_a: i2c1 {
-			pins1 {
+		i2c1_pins_a: i2c1-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO55__FUNC_SCL1_0>,
 					 <MT6797_GPIO56__FUNC_SDA1_0>;
 			};
 		};
 
-		i2c2_pins_a: i2c2 {
-			pins2 {
+		i2c2_pins_a: i2c2-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO96__FUNC_SCL2_0>,
 					 <MT6797_GPIO95__FUNC_SDA2_0>;
 			};
 		};
 
-		i2c3_pins_a: i2c3 {
-			pins3 {
+		i2c3_pins_a: i2c3-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO75__FUNC_SDA3_0>,
 					 <MT6797_GPIO74__FUNC_SCL3_0>;
 			};
 		};
 
-		i2c4_pins_a: i2c4 {
-			pins4 {
+		i2c4_pins_a: i2c4-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO238__FUNC_SDA4_0>,
 					 <MT6797_GPIO239__FUNC_SCL4_0>;
 			};
 		};
 
-		i2c5_pins_a: i2c5 {
-			pins5 {
+		i2c5_pins_a: i2c5-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO240__FUNC_SDA5_0>,
 					 <MT6797_GPIO241__FUNC_SCL5_0>;
 			};
 		};
 
-		i2c6_pins_a: i2c6 {
-			pins6 {
+		i2c6_pins_a: i2c6-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO152__FUNC_SDA6_0>,
 					 <MT6797_GPIO151__FUNC_SCL6_0>;
 			};
 		};
 
-		i2c7_pins_a: i2c7 {
-			pins7 {
+		i2c7_pins_a: i2c7-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO154__FUNC_SDA7_0>,
 					 <MT6797_GPIO153__FUNC_SCL7_0>;
 			};
@@ -228,7 +228,7 @@
 		#clock-cells = <1>;
 	};
 
-	sysirq: intpol-controller@10200620 {
+	sysirq: interrupt-controller@10200620 {
 		compatible = "mediatek,mt6797-sysirq",
 			     "mediatek,mt6577-sysirq";
 		interrupt-controller;
@@ -285,7 +285,6 @@
 	i2c0: i2c@11007000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <0>;
 		reg = <0 0x11007000 0 0x1000>,
 		      <0 0x11000100 0 0x80>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
@@ -301,7 +300,6 @@
 	i2c1: i2c@11008000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <1>;
 		reg = <0 0x11008000 0 0x1000>,
 		      <0 0x11000180 0 0x80>;
 		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
@@ -317,7 +315,6 @@
 	i2c8: i2c@11009000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <8>;
 		reg = <0 0x11009000 0 0x1000>,
 		      <0 0x11000200 0 0x80>;
 		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
@@ -334,7 +331,6 @@
 	i2c9: i2c@1100d000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <9>;
 		reg = <0 0x1100d000 0 0x1000>,
 		      <0 0x11000280 0 0x80>;
 		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
@@ -351,7 +347,6 @@
 	i2c6: i2c@1100e000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <6>;
 		reg = <0 0x1100e000 0 0x1000>,
 		      <0 0x11000500 0 0x80>;
 		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
@@ -367,7 +362,6 @@
 	i2c7: i2c@11010000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <7>;
 		reg = <0 0x11010000 0 0x1000>,
 		      <0 0x11000580 0 0x80>;
 		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
@@ -383,7 +377,6 @@
 	i2c4: i2c@11011000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <4>;
 		reg = <0 0x11011000 0 0x1000>,
 		      <0 0x11000300 0 0x80>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
@@ -399,7 +392,6 @@
 	i2c2: i2c@11013000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <2>;
 		reg = <0 0x11013000 0 0x1000>,
 		      <0 0x11000400 0 0x80>;
 		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
@@ -416,7 +408,6 @@
 	i2c3: i2c@11014000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <3>;
 		reg = <0 0x11014000 0 0x1000>,
 		      <0 0x11000480 0 0x80>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
@@ -433,7 +424,6 @@
 	i2c5: i2c@1101c000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <5>;
 		reg = <0 0x1101c000 0 0x1000>,
 		      <0 0x11000380 0 0x80>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
@@ -452,19 +442,19 @@
 		#clock-cells = <1>;
 	};
 
-	imgsys: imgsys_config@15000000  {
+	imgsys: syscon@15000000  {
 		compatible = "mediatek,mt6797-imgsys", "syscon";
 		reg = <0 0x15000000 0 0x1000>;
 		#clock-cells = <1>;
 	};
 
-	vdecsys: vdec_gcon@16000000 {
+	vdecsys: syscon@16000000 {
 		compatible = "mediatek,mt6797-vdecsys", "syscon";
 		reg = <0 0x16000000 0 0x10000>;
 		#clock-cells = <1>;
 	};
 
-	vencsys: venc_gcon@17000000 {
+	vencsys: syscon@17000000 {
 		compatible = "mediatek,mt6797-vencsys", "syscon";
 		reg = <0 0x17000000 0 0x1000>;
 		#clock-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6893-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt6893-pinfunc.h
new file mode 100644
index 000000000000..982bc95c471c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6893-pinfunc.h
@@ -0,0 +1,1356 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Copyright (c) 2025 Collabora Ltd
+ */
+
+#ifndef __MT6893_PINFUNC_H
+#define __MT6893_PINFUNC_H
+
+#include "mt65xx.h"
+
+#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define PINMUX_GPIO0__FUNC_SPI6_CLK (MTK_PIN_NO(0) | 1)
+#define PINMUX_GPIO0__FUNC_I2S5_MCK (MTK_PIN_NO(0) | 2)
+#define PINMUX_GPIO0__FUNC_PWM_0 (MTK_PIN_NO(0) | 3)
+#define PINMUX_GPIO0__FUNC_MD_INT0 (MTK_PIN_NO(0) | 4)
+#define PINMUX_GPIO0__FUNC_TP_GPIO0_AO (MTK_PIN_NO(0) | 5)
+
+#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define PINMUX_GPIO1__FUNC_SPI6_CSB (MTK_PIN_NO(1) | 1)
+#define PINMUX_GPIO1__FUNC_I2S5_BCK (MTK_PIN_NO(1) | 2)
+#define PINMUX_GPIO1__FUNC_PWM_1 (MTK_PIN_NO(1) | 3)
+#define PINMUX_GPIO1__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(1) | 4)
+#define PINMUX_GPIO1__FUNC_TP_GPIO1_AO (MTK_PIN_NO(1) | 5)
+
+#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define PINMUX_GPIO2__FUNC_SPI6_MI (MTK_PIN_NO(2) | 1)
+#define PINMUX_GPIO2__FUNC_I2S5_LRCK (MTK_PIN_NO(2) | 2)
+#define PINMUX_GPIO2__FUNC_PWM_2 (MTK_PIN_NO(2) | 3)
+#define PINMUX_GPIO2__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(2) | 4)
+#define PINMUX_GPIO2__FUNC_TP_GPIO2_AO (MTK_PIN_NO(2) | 5)
+
+#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define PINMUX_GPIO3__FUNC_SPI6_MO (MTK_PIN_NO(3) | 1)
+#define PINMUX_GPIO3__FUNC_I2S5_DO (MTK_PIN_NO(3) | 2)
+#define PINMUX_GPIO3__FUNC_PWM_3 (MTK_PIN_NO(3) | 3)
+#define PINMUX_GPIO3__FUNC_CLKM0 (MTK_PIN_NO(3) | 4)
+#define PINMUX_GPIO3__FUNC_TP_GPIO3_AO (MTK_PIN_NO(3) | 5)
+
+#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define PINMUX_GPIO4__FUNC_SPI7_A_CLK (MTK_PIN_NO(4) | 1)
+#define PINMUX_GPIO4__FUNC_I2S2_MCK (MTK_PIN_NO(4) | 2)
+#define PINMUX_GPIO4__FUNC_DMIC1_CLK (MTK_PIN_NO(4) | 3)
+#define PINMUX_GPIO4__FUNC_PCM1_DI (MTK_PIN_NO(4) | 4)
+#define PINMUX_GPIO4__FUNC_TP_GPIO4_AO (MTK_PIN_NO(4) | 5)
+
+#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define PINMUX_GPIO5__FUNC_SPI7_A_CSB (MTK_PIN_NO(5) | 1)
+#define PINMUX_GPIO5__FUNC_I2S2_BCK (MTK_PIN_NO(5) | 2)
+#define PINMUX_GPIO5__FUNC_DMIC1_DAT (MTK_PIN_NO(5) | 3)
+#define PINMUX_GPIO5__FUNC_PCM1_CLK (MTK_PIN_NO(5) | 4)
+#define PINMUX_GPIO5__FUNC_TP_GPIO5_AO (MTK_PIN_NO(5) | 5)
+
+#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define PINMUX_GPIO6__FUNC_SPI7_A_MI (MTK_PIN_NO(6) | 1)
+#define PINMUX_GPIO6__FUNC_I2S2_LRCK (MTK_PIN_NO(6) | 2)
+#define PINMUX_GPIO6__FUNC_DMIC_CLK (MTK_PIN_NO(6) | 3)
+#define PINMUX_GPIO6__FUNC_PCM1_SYNC (MTK_PIN_NO(6) | 4)
+#define PINMUX_GPIO6__FUNC_TP_GPIO6_AO (MTK_PIN_NO(6) | 5)
+#define PINMUX_GPIO6__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(6) | 6)
+
+#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define PINMUX_GPIO7__FUNC_SPI7_A_MO (MTK_PIN_NO(7) | 1)
+#define PINMUX_GPIO7__FUNC_I2S2_DI (MTK_PIN_NO(7) | 2)
+#define PINMUX_GPIO7__FUNC_DMIC_DAT (MTK_PIN_NO(7) | 3)
+#define PINMUX_GPIO7__FUNC_PCM1_DO0 (MTK_PIN_NO(7) | 4)
+#define PINMUX_GPIO7__FUNC_TP_GPIO7_AO (MTK_PIN_NO(7) | 5)
+#define PINMUX_GPIO7__FUNC_WIFI_TXD (MTK_PIN_NO(7) | 6)
+
+#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define PINMUX_GPIO8__FUNC_SRCLKENAI1 (MTK_PIN_NO(8) | 1)
+#define PINMUX_GPIO8__FUNC_I2S2_DI2 (MTK_PIN_NO(8) | 2)
+#define PINMUX_GPIO8__FUNC_KPCOL2 (MTK_PIN_NO(8) | 3)
+#define PINMUX_GPIO8__FUNC_PCM1_DO1 (MTK_PIN_NO(8) | 4)
+#define PINMUX_GPIO8__FUNC_CLKM1 (MTK_PIN_NO(8) | 5)
+#define PINMUX_GPIO8__FUNC_CONN_BT_TXD (MTK_PIN_NO(8) | 6)
+
+#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define PINMUX_GPIO9__FUNC_SRCLKENAI0 (MTK_PIN_NO(9) | 1)
+#define PINMUX_GPIO9__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(9) | 2)
+#define PINMUX_GPIO9__FUNC_KPROW2 (MTK_PIN_NO(9) | 3)
+#define PINMUX_GPIO9__FUNC_PCM1_DO2 (MTK_PIN_NO(9) | 4)
+#define PINMUX_GPIO9__FUNC_CLKM3 (MTK_PIN_NO(9) | 5)
+#define PINMUX_GPIO9__FUNC_CMMCLK4 (MTK_PIN_NO(9) | 6)
+
+#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define PINMUX_GPIO10__FUNC_MSDC1_CLK_A (MTK_PIN_NO(10) | 1)
+#define PINMUX_GPIO10__FUNC_SPI4_B_CLK (MTK_PIN_NO(10) | 2)
+#define PINMUX_GPIO10__FUNC_I2S8_MCK (MTK_PIN_NO(10) | 3)
+#define PINMUX_GPIO10__FUNC_DSI1_TE (MTK_PIN_NO(10) | 4)
+#define PINMUX_GPIO10__FUNC_MD_INT0 (MTK_PIN_NO(10) | 5)
+#define PINMUX_GPIO10__FUNC_TP_GPIO0_AO (MTK_PIN_NO(10) | 6)
+
+#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define PINMUX_GPIO11__FUNC_MSDC1_CMD_A (MTK_PIN_NO(11) | 1)
+#define PINMUX_GPIO11__FUNC_SPI4_B_CSB (MTK_PIN_NO(11) | 2)
+#define PINMUX_GPIO11__FUNC_I2S8_BCK (MTK_PIN_NO(11) | 3)
+#define PINMUX_GPIO11__FUNC_LCM1_RST (MTK_PIN_NO(11) | 4)
+#define PINMUX_GPIO11__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(11) | 5)
+#define PINMUX_GPIO11__FUNC_TP_GPIO1_AO (MTK_PIN_NO(11) | 6)
+
+#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define PINMUX_GPIO12__FUNC_MSDC1_DAT3_A (MTK_PIN_NO(12) | 1)
+#define PINMUX_GPIO12__FUNC_SPI4_B_MI (MTK_PIN_NO(12) | 2)
+#define PINMUX_GPIO12__FUNC_I2S8_LRCK (MTK_PIN_NO(12) | 3)
+#define PINMUX_GPIO12__FUNC_DMIC1_CLK (MTK_PIN_NO(12) | 4)
+#define PINMUX_GPIO12__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(12) | 5)
+#define PINMUX_GPIO12__FUNC_TP_GPIO2_AO (MTK_PIN_NO(12) | 6)
+
+#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define PINMUX_GPIO13__FUNC_MSDC1_DAT0_A (MTK_PIN_NO(13) | 1)
+#define PINMUX_GPIO13__FUNC_SPI4_B_MO (MTK_PIN_NO(13) | 2)
+#define PINMUX_GPIO13__FUNC_I2S8_DI (MTK_PIN_NO(13) | 3)
+#define PINMUX_GPIO13__FUNC_DMIC1_DAT (MTK_PIN_NO(13) | 4)
+#define PINMUX_GPIO13__FUNC_ANT_SEL10 (MTK_PIN_NO(13) | 5)
+#define PINMUX_GPIO13__FUNC_TP_GPIO3_AO (MTK_PIN_NO(13) | 6)
+
+#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define PINMUX_GPIO14__FUNC_MSDC1_DAT2_A (MTK_PIN_NO(14) | 1)
+#define PINMUX_GPIO14__FUNC_SPI5_C_CLK (MTK_PIN_NO(14) | 2)
+#define PINMUX_GPIO14__FUNC_I2S9_MCK (MTK_PIN_NO(14) | 3)
+#define PINMUX_GPIO14__FUNC_IDDIG (MTK_PIN_NO(14) | 4)
+#define PINMUX_GPIO14__FUNC_ANT_SEL11 (MTK_PIN_NO(14) | 5)
+#define PINMUX_GPIO14__FUNC_TP_GPIO4_AO (MTK_PIN_NO(14) | 6)
+
+#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define PINMUX_GPIO15__FUNC_MSDC1_DAT1_A (MTK_PIN_NO(15) | 1)
+#define PINMUX_GPIO15__FUNC_SPI5_C_CSB (MTK_PIN_NO(15) | 2)
+#define PINMUX_GPIO15__FUNC_I2S9_BCK (MTK_PIN_NO(15) | 3)
+#define PINMUX_GPIO15__FUNC_USB_DRVVBUS (MTK_PIN_NO(15) | 4)
+#define PINMUX_GPIO15__FUNC_ANT_SEL12 (MTK_PIN_NO(15) | 5)
+#define PINMUX_GPIO15__FUNC_TP_GPIO5_AO (MTK_PIN_NO(15) | 6)
+
+#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define PINMUX_GPIO16__FUNC_SRCLKENAI1 (MTK_PIN_NO(16) | 1)
+#define PINMUX_GPIO16__FUNC_SPI5_C_MI (MTK_PIN_NO(16) | 2)
+#define PINMUX_GPIO16__FUNC_I2S9_LRCK (MTK_PIN_NO(16) | 3)
+#define PINMUX_GPIO16__FUNC_KPCOL2 (MTK_PIN_NO(16) | 4)
+#define PINMUX_GPIO16__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(16) | 5)
+#define PINMUX_GPIO16__FUNC_TP_GPIO6_AO (MTK_PIN_NO(16) | 6)
+#define PINMUX_GPIO16__FUNC_DBG_MON_A30 (MTK_PIN_NO(16) | 7)
+
+#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define PINMUX_GPIO17__FUNC_SRCLKENAI0 (MTK_PIN_NO(17) | 1)
+#define PINMUX_GPIO17__FUNC_SPI5_C_MO (MTK_PIN_NO(17) | 2)
+#define PINMUX_GPIO17__FUNC_I2S9_DO (MTK_PIN_NO(17) | 3)
+#define PINMUX_GPIO17__FUNC_KPROW2 (MTK_PIN_NO(17) | 4)
+#define PINMUX_GPIO17__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(17) | 5)
+#define PINMUX_GPIO17__FUNC_TP_GPIO7_AO (MTK_PIN_NO(17) | 6)
+#define PINMUX_GPIO17__FUNC_DBG_MON_A31 (MTK_PIN_NO(17) | 7)
+
+#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define PINMUX_GPIO18__FUNC_DP_TX_HPD (MTK_PIN_NO(18) | 1)
+#define PINMUX_GPIO18__FUNC_SPI4_C_MI (MTK_PIN_NO(18) | 2)
+#define PINMUX_GPIO18__FUNC_SPI1_B_MI (MTK_PIN_NO(18) | 3)
+#define PINMUX_GPIO18__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(18) | 4)
+#define PINMUX_GPIO18__FUNC_ANT_SEL10 (MTK_PIN_NO(18) | 5)
+#define PINMUX_GPIO18__FUNC_MD_INT0 (MTK_PIN_NO(18) | 6)
+
+#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define PINMUX_GPIO19__FUNC_SRCLKENAI1 (MTK_PIN_NO(19) | 1)
+#define PINMUX_GPIO19__FUNC_SPI4_C_MO (MTK_PIN_NO(19) | 2)
+#define PINMUX_GPIO19__FUNC_SPI1_B_MO (MTK_PIN_NO(19) | 3)
+#define PINMUX_GPIO19__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(19) | 4)
+#define PINMUX_GPIO19__FUNC_ANT_SEL11 (MTK_PIN_NO(19) | 5)
+#define PINMUX_GPIO19__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(19) | 6)
+
+#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define PINMUX_GPIO20__FUNC_SRCLKENAI0 (MTK_PIN_NO(20) | 1)
+#define PINMUX_GPIO20__FUNC_SPI4_C_CLK (MTK_PIN_NO(20) | 2)
+#define PINMUX_GPIO20__FUNC_SPI1_B_CLK (MTK_PIN_NO(20) | 3)
+#define PINMUX_GPIO20__FUNC_PWM_3 (MTK_PIN_NO(20) | 4)
+#define PINMUX_GPIO20__FUNC_ANT_SEL12 (MTK_PIN_NO(20) | 5)
+#define PINMUX_GPIO20__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(20) | 6)
+
+#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define PINMUX_GPIO21__FUNC_DP_TX_HPD (MTK_PIN_NO(21) | 1)
+#define PINMUX_GPIO21__FUNC_SPI4_C_CSB (MTK_PIN_NO(21) | 2)
+#define PINMUX_GPIO21__FUNC_SPI1_B_CSB (MTK_PIN_NO(21) | 3)
+#define PINMUX_GPIO21__FUNC_I2S7_MCK (MTK_PIN_NO(21) | 4)
+#define PINMUX_GPIO21__FUNC_I2S9_MCK (MTK_PIN_NO(21) | 5)
+#define PINMUX_GPIO21__FUNC_IDDIG (MTK_PIN_NO(21) | 6)
+
+#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define PINMUX_GPIO22__FUNC_LCM1_RST (MTK_PIN_NO(22) | 1)
+#define PINMUX_GPIO22__FUNC_SPI0_C_CLK (MTK_PIN_NO(22) | 2)
+#define PINMUX_GPIO22__FUNC_SPI7_B_CLK (MTK_PIN_NO(22) | 3)
+#define PINMUX_GPIO22__FUNC_I2S7_BCK (MTK_PIN_NO(22) | 4)
+#define PINMUX_GPIO22__FUNC_I2S9_BCK (MTK_PIN_NO(22) | 5)
+#define PINMUX_GPIO22__FUNC_SCL13 (MTK_PIN_NO(22) | 6)
+
+#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define PINMUX_GPIO23__FUNC_DSI1_TE (MTK_PIN_NO(23) | 1)
+#define PINMUX_GPIO23__FUNC_SPI0_C_CSB (MTK_PIN_NO(23) | 2)
+#define PINMUX_GPIO23__FUNC_SPI7_B_CSB (MTK_PIN_NO(23) | 3)
+#define PINMUX_GPIO23__FUNC_I2S7_LRCK (MTK_PIN_NO(23) | 4)
+#define PINMUX_GPIO23__FUNC_I2S9_LRCK (MTK_PIN_NO(23) | 5)
+#define PINMUX_GPIO23__FUNC_SDA13 (MTK_PIN_NO(23) | 6)
+
+#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define PINMUX_GPIO24__FUNC_SRCLKENAI1 (MTK_PIN_NO(24) | 1)
+#define PINMUX_GPIO24__FUNC_SPI0_C_MI (MTK_PIN_NO(24) | 2)
+#define PINMUX_GPIO24__FUNC_SPI7_B_MI (MTK_PIN_NO(24) | 3)
+#define PINMUX_GPIO24__FUNC_I2S6_DI (MTK_PIN_NO(24) | 4)
+#define PINMUX_GPIO24__FUNC_I2S8_DI (MTK_PIN_NO(24) | 5)
+#define PINMUX_GPIO24__FUNC_SCL_6306 (MTK_PIN_NO(24) | 6)
+
+#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define PINMUX_GPIO25__FUNC_SRCLKENAI0 (MTK_PIN_NO(25) | 1)
+#define PINMUX_GPIO25__FUNC_SPI0_C_MO (MTK_PIN_NO(25) | 2)
+#define PINMUX_GPIO25__FUNC_SPI7_B_MO (MTK_PIN_NO(25) | 3)
+#define PINMUX_GPIO25__FUNC_I2S7_DO (MTK_PIN_NO(25) | 4)
+#define PINMUX_GPIO25__FUNC_I2S9_DO (MTK_PIN_NO(25) | 5)
+#define PINMUX_GPIO25__FUNC_SDA_6306 (MTK_PIN_NO(25) | 6)
+
+#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define PINMUX_GPIO26__FUNC_PWM_2 (MTK_PIN_NO(26) | 1)
+#define PINMUX_GPIO26__FUNC_CLKM0 (MTK_PIN_NO(26) | 2)
+#define PINMUX_GPIO26__FUNC_USB_DRVVBUS (MTK_PIN_NO(26) | 3)
+
+#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define PINMUX_GPIO27__FUNC_PWM_3 (MTK_PIN_NO(27) | 1)
+#define PINMUX_GPIO27__FUNC_CLKM1 (MTK_PIN_NO(27) | 2)
+
+#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define PINMUX_GPIO28__FUNC_PWM_0 (MTK_PIN_NO(28) | 1)
+#define PINMUX_GPIO28__FUNC_CLKM2 (MTK_PIN_NO(28) | 2)
+
+#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define PINMUX_GPIO29__FUNC_PWM_1 (MTK_PIN_NO(29) | 1)
+#define PINMUX_GPIO29__FUNC_CLKM3 (MTK_PIN_NO(29) | 2)
+#define PINMUX_GPIO29__FUNC_DSI1_TE (MTK_PIN_NO(29) | 3)
+
+#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define PINMUX_GPIO30__FUNC_PWM_2 (MTK_PIN_NO(30) | 1)
+#define PINMUX_GPIO30__FUNC_CLKM0 (MTK_PIN_NO(30) | 2)
+#define PINMUX_GPIO30__FUNC_LCM1_RST (MTK_PIN_NO(30) | 3)
+
+#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define PINMUX_GPIO31__FUNC_I2S3_MCK (MTK_PIN_NO(31) | 1)
+#define PINMUX_GPIO31__FUNC_I2S1_MCK (MTK_PIN_NO(31) | 2)
+#define PINMUX_GPIO31__FUNC_I2S5_MCK (MTK_PIN_NO(31) | 3)
+#define PINMUX_GPIO31__FUNC_SRCLKENAI0 (MTK_PIN_NO(31) | 4)
+#define PINMUX_GPIO31__FUNC_I2S0_MCK (MTK_PIN_NO(31) | 5)
+
+#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define PINMUX_GPIO32__FUNC_I2S3_BCK (MTK_PIN_NO(32) | 1)
+#define PINMUX_GPIO32__FUNC_I2S1_BCK (MTK_PIN_NO(32) | 2)
+#define PINMUX_GPIO32__FUNC_I2S5_BCK (MTK_PIN_NO(32) | 3)
+#define PINMUX_GPIO32__FUNC_PCM0_CLK (MTK_PIN_NO(32) | 4)
+#define PINMUX_GPIO32__FUNC_I2S0_BCK (MTK_PIN_NO(32) | 5)
+
+#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define PINMUX_GPIO33__FUNC_I2S3_LRCK (MTK_PIN_NO(33) | 1)
+#define PINMUX_GPIO33__FUNC_I2S1_LRCK (MTK_PIN_NO(33) | 2)
+#define PINMUX_GPIO33__FUNC_I2S5_LRCK (MTK_PIN_NO(33) | 3)
+#define PINMUX_GPIO33__FUNC_PCM0_SYNC (MTK_PIN_NO(33) | 4)
+#define PINMUX_GPIO33__FUNC_I2S0_LRCK (MTK_PIN_NO(33) | 5)
+
+#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define PINMUX_GPIO34__FUNC_I2S0_DI (MTK_PIN_NO(34) | 1)
+#define PINMUX_GPIO34__FUNC_I2S2_DI (MTK_PIN_NO(34) | 2)
+#define PINMUX_GPIO34__FUNC_I2S2_DI2 (MTK_PIN_NO(34) | 3)
+#define PINMUX_GPIO34__FUNC_PCM0_DI (MTK_PIN_NO(34) | 4)
+#define PINMUX_GPIO34__FUNC_I2S0_DI_A (MTK_PIN_NO(34) | 5)
+
+#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define PINMUX_GPIO35__FUNC_I2S3_DO (MTK_PIN_NO(35) | 1)
+#define PINMUX_GPIO35__FUNC_I2S1_DO (MTK_PIN_NO(35) | 2)
+#define PINMUX_GPIO35__FUNC_I2S5_DO (MTK_PIN_NO(35) | 3)
+#define PINMUX_GPIO35__FUNC_PCM0_DO (MTK_PIN_NO(35) | 4)
+
+#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define PINMUX_GPIO36__FUNC_SPI5_A_CLK (MTK_PIN_NO(36) | 1)
+#define PINMUX_GPIO36__FUNC_DMIC1_CLK (MTK_PIN_NO(36) | 2)
+#define PINMUX_GPIO36__FUNC_IDDIG (MTK_PIN_NO(36) | 3)
+#define PINMUX_GPIO36__FUNC_MD_URXD0 (MTK_PIN_NO(36) | 4)
+#define PINMUX_GPIO36__FUNC_UCTS0 (MTK_PIN_NO(36) | 5)
+#define PINMUX_GPIO36__FUNC_URXD1 (MTK_PIN_NO(36) | 6)
+#define PINMUX_GPIO36__FUNC_DBG_MON_A0 (MTK_PIN_NO(36) | 7)
+
+#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define PINMUX_GPIO37__FUNC_SPI5_A_CSB (MTK_PIN_NO(37) | 1)
+#define PINMUX_GPIO37__FUNC_DMIC1_DAT (MTK_PIN_NO(37) | 2)
+#define PINMUX_GPIO37__FUNC_USB_DRVVBUS (MTK_PIN_NO(37) | 3)
+#define PINMUX_GPIO37__FUNC_MD_UTXD0 (MTK_PIN_NO(37) | 4)
+#define PINMUX_GPIO37__FUNC_URTS0 (MTK_PIN_NO(37) | 5)
+#define PINMUX_GPIO37__FUNC_UTXD1 (MTK_PIN_NO(37) | 6)
+#define PINMUX_GPIO37__FUNC_DBG_MON_A1 (MTK_PIN_NO(37) | 7)
+
+#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define PINMUX_GPIO38__FUNC_SPI5_A_MI (MTK_PIN_NO(38) | 1)
+#define PINMUX_GPIO38__FUNC_DMIC_CLK (MTK_PIN_NO(38) | 2)
+#define PINMUX_GPIO38__FUNC_DSI1_TE (MTK_PIN_NO(38) | 3)
+#define PINMUX_GPIO38__FUNC_MD_URXD1 (MTK_PIN_NO(38) | 4)
+#define PINMUX_GPIO38__FUNC_URXD0 (MTK_PIN_NO(38) | 5)
+#define PINMUX_GPIO38__FUNC_UCTS1 (MTK_PIN_NO(38) | 6)
+#define PINMUX_GPIO38__FUNC_DBG_MON_A2 (MTK_PIN_NO(38) | 7)
+
+#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define PINMUX_GPIO39__FUNC_SPI5_A_MO (MTK_PIN_NO(39) | 1)
+#define PINMUX_GPIO39__FUNC_DMIC_DAT (MTK_PIN_NO(39) | 2)
+#define PINMUX_GPIO39__FUNC_LCM1_RST (MTK_PIN_NO(39) | 3)
+#define PINMUX_GPIO39__FUNC_MD_UTXD1 (MTK_PIN_NO(39) | 4)
+#define PINMUX_GPIO39__FUNC_UTXD0 (MTK_PIN_NO(39) | 5)
+#define PINMUX_GPIO39__FUNC_URTS1 (MTK_PIN_NO(39) | 6)
+#define PINMUX_GPIO39__FUNC_DBG_MON_A3 (MTK_PIN_NO(39) | 7)
+
+#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define PINMUX_GPIO40__FUNC_DISP_PWM (MTK_PIN_NO(40) | 1)
+#define PINMUX_GPIO40__FUNC_DBG_MON_A6 (MTK_PIN_NO(40) | 7)
+
+#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define PINMUX_GPIO41__FUNC_DSI_TE (MTK_PIN_NO(41) | 1)
+
+#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define PINMUX_GPIO42__FUNC_LCM_RST (MTK_PIN_NO(42) | 1)
+
+#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define PINMUX_GPIO43__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(43) | 1)
+#define PINMUX_GPIO43__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(43) | 2)
+#define PINMUX_GPIO43__FUNC_SCL_6306 (MTK_PIN_NO(43) | 3)
+#define PINMUX_GPIO43__FUNC_ADSP_URXD0 (MTK_PIN_NO(43) | 4)
+#define PINMUX_GPIO43__FUNC_PTA_RXD (MTK_PIN_NO(43) | 5)
+#define PINMUX_GPIO43__FUNC_SSPM_URXD_AO (MTK_PIN_NO(43) | 6)
+#define PINMUX_GPIO43__FUNC_DBG_MON_A4 (MTK_PIN_NO(43) | 7)
+
+#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define PINMUX_GPIO44__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(44) | 1)
+#define PINMUX_GPIO44__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(44) | 2)
+#define PINMUX_GPIO44__FUNC_SDA_6306 (MTK_PIN_NO(44) | 3)
+#define PINMUX_GPIO44__FUNC_ADSP_UTXD0 (MTK_PIN_NO(44) | 4)
+#define PINMUX_GPIO44__FUNC_PTA_TXD (MTK_PIN_NO(44) | 5)
+#define PINMUX_GPIO44__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(44) | 6)
+#define PINMUX_GPIO44__FUNC_DBG_MON_A5 (MTK_PIN_NO(44) | 7)
+
+#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define PINMUX_GPIO45__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(45) | 1)
+#define PINMUX_GPIO45__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(45) | 2)
+#define PINMUX_GPIO45__FUNC_MCUPM_JTAG_TDI (MTK_PIN_NO(45) | 3)
+#define PINMUX_GPIO45__FUNC_APU_JTAG_TDI (MTK_PIN_NO(45) | 4)
+#define PINMUX_GPIO45__FUNC_CCU_JTAG_TDI (MTK_PIN_NO(45) | 5)
+#define PINMUX_GPIO45__FUNC_LVTS_SCK (MTK_PIN_NO(45) | 6)
+
+#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define PINMUX_GPIO46__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(46) | 1)
+#define PINMUX_GPIO46__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(46) | 2)
+#define PINMUX_GPIO46__FUNC_MCUPM_JTAG_TMS (MTK_PIN_NO(46) | 3)
+#define PINMUX_GPIO46__FUNC_APU_JTAG_TMS (MTK_PIN_NO(46) | 4)
+#define PINMUX_GPIO46__FUNC_CCU_JTAG_TMS (MTK_PIN_NO(46) | 5)
+#define PINMUX_GPIO46__FUNC_LVTS_SDI (MTK_PIN_NO(46) | 6)
+
+#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define PINMUX_GPIO47__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(47) | 1)
+#define PINMUX_GPIO47__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(47) | 2)
+#define PINMUX_GPIO47__FUNC_MCUPM_JTAG_TDO (MTK_PIN_NO(47) | 3)
+#define PINMUX_GPIO47__FUNC_APU_JTAG_TDO (MTK_PIN_NO(47) | 4)
+#define PINMUX_GPIO47__FUNC_CCU_JTAG_TDO (MTK_PIN_NO(47) | 5)
+#define PINMUX_GPIO47__FUNC_LVTS_SCF (MTK_PIN_NO(47) | 6)
+
+#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define PINMUX_GPIO48__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(48) | 1)
+#define PINMUX_GPIO48__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(48) | 2)
+#define PINMUX_GPIO48__FUNC_MCUPM_JTAG_TRSTN (MTK_PIN_NO(48) | 3)
+#define PINMUX_GPIO48__FUNC_APU_JTAG_TRST (MTK_PIN_NO(48) | 4)
+#define PINMUX_GPIO48__FUNC_CCU_JTAG_TRST (MTK_PIN_NO(48) | 5)
+#define PINMUX_GPIO48__FUNC_LVTS_FOUT (MTK_PIN_NO(48) | 6)
+
+#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define PINMUX_GPIO49__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(49) | 1)
+#define PINMUX_GPIO49__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(49) | 2)
+#define PINMUX_GPIO49__FUNC_MCUPM_JTAG_TCK (MTK_PIN_NO(49) | 3)
+#define PINMUX_GPIO49__FUNC_APU_JTAG_TCK (MTK_PIN_NO(49) | 4)
+#define PINMUX_GPIO49__FUNC_CCU_JTAG_TCK (MTK_PIN_NO(49) | 5)
+#define PINMUX_GPIO49__FUNC_LVTS_SDO (MTK_PIN_NO(49) | 6)
+
+#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define PINMUX_GPIO50__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(50) | 1)
+#define PINMUX_GPIO50__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(50) | 2)
+#define PINMUX_GPIO50__FUNC_LVTS_26M (MTK_PIN_NO(50) | 6)
+
+#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define PINMUX_GPIO51__FUNC_MSDC1_CLK (MTK_PIN_NO(51) | 1)
+#define PINMUX_GPIO51__FUNC_PCM1_CLK (MTK_PIN_NO(51) | 2)
+#define PINMUX_GPIO51__FUNC_VPU_UDI_TCK (MTK_PIN_NO(51) | 3)
+#define PINMUX_GPIO51__FUNC_UDI_TCK (MTK_PIN_NO(51) | 4)
+#define PINMUX_GPIO51__FUNC_IPU_JTAG_TCK (MTK_PIN_NO(51) | 5)
+#define PINMUX_GPIO51__FUNC_SSPM_JTAG_TCK (MTK_PIN_NO(51) | 6)
+#define PINMUX_GPIO51__FUNC_JTCK_SEL3 (MTK_PIN_NO(51) | 7)
+
+#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define PINMUX_GPIO52__FUNC_MSDC1_CMD (MTK_PIN_NO(52) | 1)
+#define PINMUX_GPIO52__FUNC_PCM1_SYNC (MTK_PIN_NO(52) | 2)
+#define PINMUX_GPIO52__FUNC_VPU_UDI_TMS (MTK_PIN_NO(52) | 3)
+#define PINMUX_GPIO52__FUNC_UDI_TMS (MTK_PIN_NO(52) | 4)
+#define PINMUX_GPIO52__FUNC_IPU_JTAG_TMS (MTK_PIN_NO(52) | 5)
+#define PINMUX_GPIO52__FUNC_SSPM_JTAG_TMS (MTK_PIN_NO(52) | 6)
+#define PINMUX_GPIO52__FUNC_JTMS_SEL3 (MTK_PIN_NO(52) | 7)
+
+#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define PINMUX_GPIO53__FUNC_MSDC1_DAT3 (MTK_PIN_NO(53) | 1)
+#define PINMUX_GPIO53__FUNC_PCM1_DI (MTK_PIN_NO(53) | 2)
+
+#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define PINMUX_GPIO54__FUNC_MSDC1_DAT0 (MTK_PIN_NO(54) | 1)
+#define PINMUX_GPIO54__FUNC_PCM1_DO0 (MTK_PIN_NO(54) | 2)
+#define PINMUX_GPIO54__FUNC_VPU_UDI_TDI (MTK_PIN_NO(54) | 3)
+#define PINMUX_GPIO54__FUNC_UDI_TDI (MTK_PIN_NO(54) | 4)
+#define PINMUX_GPIO54__FUNC_IPU_JTAG_TDI (MTK_PIN_NO(54) | 5)
+#define PINMUX_GPIO54__FUNC_SSPM_JTAG_TDI (MTK_PIN_NO(54) | 6)
+#define PINMUX_GPIO54__FUNC_JTDI_SEL3 (MTK_PIN_NO(54) | 7)
+
+#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define PINMUX_GPIO55__FUNC_MSDC1_DAT2 (MTK_PIN_NO(55) | 1)
+#define PINMUX_GPIO55__FUNC_PCM1_DO2 (MTK_PIN_NO(55) | 2)
+#define PINMUX_GPIO55__FUNC_VPU_UDI_NTRST (MTK_PIN_NO(55) | 3)
+#define PINMUX_GPIO55__FUNC_UDI_NTRST (MTK_PIN_NO(55) | 4)
+#define PINMUX_GPIO55__FUNC_IPU_JTAG_TRST (MTK_PIN_NO(55) | 5)
+#define PINMUX_GPIO55__FUNC_SSPM_JTAG_TRSTN (MTK_PIN_NO(55) | 6)
+#define PINMUX_GPIO55__FUNC_JTRSTN_SEL3 (MTK_PIN_NO(55) | 7)
+
+#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define PINMUX_GPIO56__FUNC_MSDC1_DAT1 (MTK_PIN_NO(56) | 1)
+#define PINMUX_GPIO56__FUNC_PCM1_DO1 (MTK_PIN_NO(56) | 2)
+#define PINMUX_GPIO56__FUNC_VPU_UDI_TDO (MTK_PIN_NO(56) | 3)
+#define PINMUX_GPIO56__FUNC_UDI_TDO (MTK_PIN_NO(56) | 4)
+#define PINMUX_GPIO56__FUNC_IPU_JTAG_TDO (MTK_PIN_NO(56) | 5)
+#define PINMUX_GPIO56__FUNC_SSPM_JTAG_TDO (MTK_PIN_NO(56) | 6)
+#define PINMUX_GPIO56__FUNC_JTDO_SEL3 (MTK_PIN_NO(56) | 7)
+
+#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define PINMUX_GPIO57__FUNC_MIPI2_D_SCLK (MTK_PIN_NO(57) | 1)
+#define PINMUX_GPIO57__FUNC_DBG_MON_A14 (MTK_PIN_NO(57) | 7)
+
+#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define PINMUX_GPIO58__FUNC_MIPI2_D_SDATA (MTK_PIN_NO(58) | 1)
+#define PINMUX_GPIO58__FUNC_DBG_MON_A15 (MTK_PIN_NO(58) | 7)
+
+#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define PINMUX_GPIO59__FUNC_MIPI_M_SCLK (MTK_PIN_NO(59) | 1)
+#define PINMUX_GPIO59__FUNC_DBG_MON_A17 (MTK_PIN_NO(59) | 7)
+
+#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define PINMUX_GPIO60__FUNC_MIPI_M_SDATA (MTK_PIN_NO(60) | 1)
+#define PINMUX_GPIO60__FUNC_DBG_MON_A18 (MTK_PIN_NO(60) | 7)
+
+#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define PINMUX_GPIO61__FUNC_MD_UCNT_A_TGL (MTK_PIN_NO(61) | 1)
+#define PINMUX_GPIO61__FUNC_DBG_MON_A16 (MTK_PIN_NO(61) | 7)
+
+#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define PINMUX_GPIO62__FUNC_DIGRF_IRQ (MTK_PIN_NO(62) | 1)
+
+#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define PINMUX_GPIO63__FUNC_BPI_BUS0 (MTK_PIN_NO(63) | 1)
+#define PINMUX_GPIO63__FUNC_DBG_MON_A19 (MTK_PIN_NO(63) | 7)
+
+#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define PINMUX_GPIO64__FUNC_BPI_BUS1 (MTK_PIN_NO(64) | 1)
+#define PINMUX_GPIO64__FUNC_DBG_MON_A20 (MTK_PIN_NO(64) | 7)
+
+#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define PINMUX_GPIO65__FUNC_BPI_BUS2 (MTK_PIN_NO(65) | 1)
+#define PINMUX_GPIO65__FUNC_DBG_MON_A21 (MTK_PIN_NO(65) | 7)
+
+#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define PINMUX_GPIO66__FUNC_BPI_BUS3 (MTK_PIN_NO(66) | 1)
+#define PINMUX_GPIO66__FUNC_DBG_MON_A22 (MTK_PIN_NO(66) | 7)
+
+#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define PINMUX_GPIO67__FUNC_BPI_BUS4 (MTK_PIN_NO(67) | 1)
+
+#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define PINMUX_GPIO68__FUNC_BPI_BUS5 (MTK_PIN_NO(68) | 1)
+
+#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define PINMUX_GPIO69__FUNC_BPI_BUS6 (MTK_PIN_NO(69) | 1)
+#define PINMUX_GPIO69__FUNC_CONN_BPI_BUS6 (MTK_PIN_NO(69) | 2)
+
+#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define PINMUX_GPIO70__FUNC_BPI_BUS7 (MTK_PIN_NO(70) | 1)
+#define PINMUX_GPIO70__FUNC_CONN_BPI_BUS7 (MTK_PIN_NO(70) | 2)
+
+#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define PINMUX_GPIO71__FUNC_BPI_BUS8 (MTK_PIN_NO(71) | 1)
+#define PINMUX_GPIO71__FUNC_CONN_BPI_BUS8 (MTK_PIN_NO(71) | 2)
+
+#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define PINMUX_GPIO72__FUNC_BPI_BUS9 (MTK_PIN_NO(72) | 1)
+#define PINMUX_GPIO72__FUNC_CONN_BPI_BUS9 (MTK_PIN_NO(72) | 2)
+
+#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define PINMUX_GPIO73__FUNC_BPI_BUS10 (MTK_PIN_NO(73) | 1)
+#define PINMUX_GPIO73__FUNC_CONN_BPI_BUS10 (MTK_PIN_NO(73) | 2)
+
+#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define PINMUX_GPIO74__FUNC_BPI_BUS11_OLAT0 (MTK_PIN_NO(74) | 1)
+#define PINMUX_GPIO74__FUNC_CONN_BPI_BUS11_OLAT0 (MTK_PIN_NO(74) | 2)
+
+#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define PINMUX_GPIO75__FUNC_BPI_BUS12_OLAT1 (MTK_PIN_NO(75) | 1)
+#define PINMUX_GPIO75__FUNC_CONN_BPI_BUS12_OLAT1 (MTK_PIN_NO(75) | 2)
+
+#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define PINMUX_GPIO76__FUNC_BPI_BUS13_OLAT2 (MTK_PIN_NO(76) | 1)
+#define PINMUX_GPIO76__FUNC_CONN_BPI_BUS13_OLAT2 (MTK_PIN_NO(76) | 2)
+
+#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define PINMUX_GPIO77__FUNC_BPI_BUS14_OLAT3 (MTK_PIN_NO(77) | 1)
+#define PINMUX_GPIO77__FUNC_CONN_BPI_BUS14_OLAT3 (MTK_PIN_NO(77) | 2)
+
+#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define PINMUX_GPIO78__FUNC_BPI_BUS15_OLAT4 (MTK_PIN_NO(78) | 1)
+#define PINMUX_GPIO78__FUNC_CONN_BPI_BUS15_OLAT4 (MTK_PIN_NO(78) | 2)
+#define PINMUX_GPIO78__FUNC_DBG_MON_A7 (MTK_PIN_NO(78) | 7)
+
+#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define PINMUX_GPIO79__FUNC_BPI_BUS16_OLAT5 (MTK_PIN_NO(79) | 1)
+#define PINMUX_GPIO79__FUNC_CONN_BPI_BUS16_OLAT5 (MTK_PIN_NO(79) | 2)
+#define PINMUX_GPIO79__FUNC_DBG_MON_A8 (MTK_PIN_NO(79) | 7)
+
+#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define PINMUX_GPIO80__FUNC_BPI_BUS17_ANT0 (MTK_PIN_NO(80) | 1)
+#define PINMUX_GPIO80__FUNC_CONN_BPI_BUS17_ANT0 (MTK_PIN_NO(80) | 2)
+#define PINMUX_GPIO80__FUNC_DBG_MON_A9 (MTK_PIN_NO(80) | 7)
+
+#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define PINMUX_GPIO81__FUNC_BPI_BUS18_ANT1 (MTK_PIN_NO(81) | 1)
+#define PINMUX_GPIO81__FUNC_CONN_BPI_BUS18_ANT1 (MTK_PIN_NO(81) | 2)
+#define PINMUX_GPIO81__FUNC_DBG_MON_A10 (MTK_PIN_NO(81) | 7)
+
+#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define PINMUX_GPIO82__FUNC_BPI_BUS19_ANT2 (MTK_PIN_NO(82) | 1)
+#define PINMUX_GPIO82__FUNC_CONN_BPI_BUS19_ANT2 (MTK_PIN_NO(82) | 2)
+#define PINMUX_GPIO82__FUNC_DBG_MON_A11 (MTK_PIN_NO(82) | 7)
+
+#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define PINMUX_GPIO83__FUNC_BPI_BUS20_ANT3 (MTK_PIN_NO(83) | 1)
+#define PINMUX_GPIO83__FUNC_CONN_BPI_BUS20_ANT3 (MTK_PIN_NO(83) | 2)
+#define PINMUX_GPIO83__FUNC_DBG_MON_A12 (MTK_PIN_NO(83) | 7)
+
+#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define PINMUX_GPIO84__FUNC_BPI_BUS21_ANT4 (MTK_PIN_NO(84) | 1)
+#define PINMUX_GPIO84__FUNC_CONN_BPI_BUS21_ANT4 (MTK_PIN_NO(84) | 2)
+#define PINMUX_GPIO84__FUNC_DBG_MON_A13 (MTK_PIN_NO(84) | 7)
+
+#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define PINMUX_GPIO85__FUNC_MIPI1_D_SCLK (MTK_PIN_NO(85) | 1)
+#define PINMUX_GPIO85__FUNC_CONN_MIPI1_SCLK (MTK_PIN_NO(85) | 2)
+
+#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define PINMUX_GPIO86__FUNC_MIPI1_D_SDATA (MTK_PIN_NO(86) | 1)
+#define PINMUX_GPIO86__FUNC_CONN_MIPI1_SDATA (MTK_PIN_NO(86) | 2)
+
+#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define PINMUX_GPIO87__FUNC_MIPI0_D_SCLK (MTK_PIN_NO(87) | 1)
+#define PINMUX_GPIO87__FUNC_CONN_MIPI0_SCLK (MTK_PIN_NO(87) | 2)
+
+#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define PINMUX_GPIO88__FUNC_MIPI0_D_SDATA (MTK_PIN_NO(88) | 1)
+#define PINMUX_GPIO88__FUNC_CONN_MIPI0_SDATA (MTK_PIN_NO(88) | 2)
+
+#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define PINMUX_GPIO89__FUNC_SPMI_SCL (MTK_PIN_NO(89) | 1)
+#define PINMUX_GPIO89__FUNC_SCL10 (MTK_PIN_NO(89) | 2)
+
+#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define PINMUX_GPIO90__FUNC_SPMI_SDA (MTK_PIN_NO(90) | 1)
+#define PINMUX_GPIO90__FUNC_SDA10 (MTK_PIN_NO(90) | 2)
+
+#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define PINMUX_GPIO91__FUNC_AP_GOOD (MTK_PIN_NO(91) | 1)
+
+#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define PINMUX_GPIO92__FUNC_URXD0 (MTK_PIN_NO(92) | 1)
+#define PINMUX_GPIO92__FUNC_MD_URXD0 (MTK_PIN_NO(92) | 2)
+#define PINMUX_GPIO92__FUNC_MD_URXD1 (MTK_PIN_NO(92) | 3)
+#define PINMUX_GPIO92__FUNC_SSPM_URXD_AO (MTK_PIN_NO(92) | 4)
+#define PINMUX_GPIO92__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(92) | 5)
+
+#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define PINMUX_GPIO93__FUNC_UTXD0 (MTK_PIN_NO(93) | 1)
+#define PINMUX_GPIO93__FUNC_MD_UTXD0 (MTK_PIN_NO(93) | 2)
+#define PINMUX_GPIO93__FUNC_MD_UTXD1 (MTK_PIN_NO(93) | 3)
+#define PINMUX_GPIO93__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(93) | 4)
+#define PINMUX_GPIO93__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(93) | 5)
+#define PINMUX_GPIO93__FUNC_WIFI_TXD (MTK_PIN_NO(93) | 6)
+
+#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define PINMUX_GPIO94__FUNC_URXD1 (MTK_PIN_NO(94) | 1)
+#define PINMUX_GPIO94__FUNC_ADSP_URXD0 (MTK_PIN_NO(94) | 2)
+#define PINMUX_GPIO94__FUNC_MD32_0_RXD (MTK_PIN_NO(94) | 3)
+#define PINMUX_GPIO94__FUNC_SSPM_URXD_AO (MTK_PIN_NO(94) | 4)
+#define PINMUX_GPIO94__FUNC_TP_URXD1_AO (MTK_PIN_NO(94) | 5)
+#define PINMUX_GPIO94__FUNC_TP_URXD2_AO (MTK_PIN_NO(94) | 6)
+#define PINMUX_GPIO94__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(94) | 7)
+
+#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define PINMUX_GPIO95__FUNC_UTXD1 (MTK_PIN_NO(95) | 1)
+#define PINMUX_GPIO95__FUNC_ADSP_UTXD0 (MTK_PIN_NO(95) | 2)
+#define PINMUX_GPIO95__FUNC_MD32_0_TXD (MTK_PIN_NO(95) | 3)
+#define PINMUX_GPIO95__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(95) | 4)
+#define PINMUX_GPIO95__FUNC_TP_UTXD1_AO (MTK_PIN_NO(95) | 5)
+#define PINMUX_GPIO95__FUNC_TP_UTXD2_AO (MTK_PIN_NO(95) | 6)
+#define PINMUX_GPIO95__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(95) | 7)
+
+#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define PINMUX_GPIO96__FUNC_TDM_LRCK (MTK_PIN_NO(96) | 1)
+#define PINMUX_GPIO96__FUNC_I2S7_LRCK (MTK_PIN_NO(96) | 2)
+#define PINMUX_GPIO96__FUNC_I2S9_LRCK (MTK_PIN_NO(96) | 3)
+#define PINMUX_GPIO96__FUNC_SPI4_A_CLK (MTK_PIN_NO(96) | 4)
+#define PINMUX_GPIO96__FUNC_ADSP_JTAG0_TDI (MTK_PIN_NO(96) | 5)
+#define PINMUX_GPIO96__FUNC_CONN_BGF_DSP_L1_JDI (MTK_PIN_NO(96) | 6)
+#define PINMUX_GPIO96__FUNC_IO_JTAG_TDI (MTK_PIN_NO(96) | 7)
+
+#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define PINMUX_GPIO97__FUNC_TDM_BCK (MTK_PIN_NO(97) | 1)
+#define PINMUX_GPIO97__FUNC_I2S7_BCK (MTK_PIN_NO(97) | 2)
+#define PINMUX_GPIO97__FUNC_I2S9_BCK (MTK_PIN_NO(97) | 3)
+#define PINMUX_GPIO97__FUNC_SPI4_A_CSB (MTK_PIN_NO(97) | 4)
+#define PINMUX_GPIO97__FUNC_ADSP_JTAG0_TRSTN (MTK_PIN_NO(97) | 5)
+#define PINMUX_GPIO97__FUNC_CONN_BGF_DSP_L1_JINTP (MTK_PIN_NO(97) | 6)
+#define PINMUX_GPIO97__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(97) | 7)
+
+#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define PINMUX_GPIO98__FUNC_TDM_MCK (MTK_PIN_NO(98) | 1)
+#define PINMUX_GPIO98__FUNC_I2S7_MCK (MTK_PIN_NO(98) | 2)
+#define PINMUX_GPIO98__FUNC_I2S9_MCK (MTK_PIN_NO(98) | 3)
+#define PINMUX_GPIO98__FUNC_SPI4_A_MI (MTK_PIN_NO(98) | 4)
+#define PINMUX_GPIO98__FUNC_ADSP_JTAG0_TCK (MTK_PIN_NO(98) | 5)
+#define PINMUX_GPIO98__FUNC_CONN_BGF_DSP_L1_JCK (MTK_PIN_NO(98) | 6)
+#define PINMUX_GPIO98__FUNC_IO_JTAG_TCK (MTK_PIN_NO(98) | 7)
+
+#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define PINMUX_GPIO99__FUNC_TDM_DATA0 (MTK_PIN_NO(99) | 1)
+#define PINMUX_GPIO99__FUNC_I2S6_DI (MTK_PIN_NO(99) | 2)
+#define PINMUX_GPIO99__FUNC_I2S8_DI (MTK_PIN_NO(99) | 3)
+#define PINMUX_GPIO99__FUNC_SPI4_A_MO (MTK_PIN_NO(99) | 4)
+#define PINMUX_GPIO99__FUNC_ADSP_JTAG0_TDO (MTK_PIN_NO(99) | 5)
+#define PINMUX_GPIO99__FUNC_CONN_BGF_DSP_L1_JDO (MTK_PIN_NO(99) | 6)
+#define PINMUX_GPIO99__FUNC_IO_JTAG_TDO (MTK_PIN_NO(99) | 7)
+
+#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define PINMUX_GPIO100__FUNC_TDM_DATA1 (MTK_PIN_NO(100) | 1)
+#define PINMUX_GPIO100__FUNC_I2S7_DO (MTK_PIN_NO(100) | 2)
+#define PINMUX_GPIO100__FUNC_I2S9_DO (MTK_PIN_NO(100) | 3)
+#define PINMUX_GPIO100__FUNC_DP_TX_HPD (MTK_PIN_NO(100) | 4)
+#define PINMUX_GPIO100__FUNC_ADSP_JTAG0_TMS (MTK_PIN_NO(100) | 5)
+#define PINMUX_GPIO100__FUNC_CONN_BGF_DSP_L1_JMS (MTK_PIN_NO(100) | 6)
+#define PINMUX_GPIO100__FUNC_IO_JTAG_TMS (MTK_PIN_NO(100) | 7)
+
+#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define PINMUX_GPIO101__FUNC_TDM_DATA2 (MTK_PIN_NO(101) | 1)
+#define PINMUX_GPIO101__FUNC_DMIC1_CLK (MTK_PIN_NO(101) | 2)
+#define PINMUX_GPIO101__FUNC_SRCLKENAI0 (MTK_PIN_NO(101) | 3)
+#define PINMUX_GPIO101__FUNC_SPI5_B_CLK (MTK_PIN_NO(101) | 4)
+#define PINMUX_GPIO101__FUNC_CLKM0 (MTK_PIN_NO(101) | 5)
+#define PINMUX_GPIO101__FUNC_DAP_MD32_SWD (MTK_PIN_NO(101) | 7)
+
+#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define PINMUX_GPIO102__FUNC_TDM_DATA3 (MTK_PIN_NO(102) | 1)
+#define PINMUX_GPIO102__FUNC_DMIC1_DAT (MTK_PIN_NO(102) | 2)
+#define PINMUX_GPIO102__FUNC_SRCLKENAI1 (MTK_PIN_NO(102) | 3)
+#define PINMUX_GPIO102__FUNC_SPI5_B_CSB (MTK_PIN_NO(102) | 4)
+#define PINMUX_GPIO102__FUNC_DP_TX_HPD (MTK_PIN_NO(102) | 5)
+#define PINMUX_GPIO102__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(102) | 6)
+#define PINMUX_GPIO102__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(102) | 7)
+
+#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define PINMUX_GPIO103__FUNC_SPI0_A_MI (MTK_PIN_NO(103) | 1)
+#define PINMUX_GPIO103__FUNC_SCP_SPI0_MI (MTK_PIN_NO(103) | 2)
+#define PINMUX_GPIO103__FUNC_DFD_TDO (MTK_PIN_NO(103) | 5)
+#define PINMUX_GPIO103__FUNC_SPM_JTAG_TDO (MTK_PIN_NO(103) | 6)
+#define PINMUX_GPIO103__FUNC_JTDO_SEL1 (MTK_PIN_NO(103) | 7)
+
+#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define PINMUX_GPIO104__FUNC_SPI0_A_CSB (MTK_PIN_NO(104) | 1)
+#define PINMUX_GPIO104__FUNC_SCP_SPI0_CS (MTK_PIN_NO(104) | 2)
+#define PINMUX_GPIO104__FUNC_DFD_TMS (MTK_PIN_NO(104) | 5)
+#define PINMUX_GPIO104__FUNC_SPM_JTAG_TMS (MTK_PIN_NO(104) | 6)
+#define PINMUX_GPIO104__FUNC_JTMS_SEL1 (MTK_PIN_NO(104) | 7)
+
+#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define PINMUX_GPIO105__FUNC_SPI0_A_MO (MTK_PIN_NO(105) | 1)
+#define PINMUX_GPIO105__FUNC_SCP_SPI0_MO (MTK_PIN_NO(105) | 2)
+#define PINMUX_GPIO105__FUNC_SCP_SDA0 (MTK_PIN_NO(105) | 3)
+#define PINMUX_GPIO105__FUNC_DFD_TDI (MTK_PIN_NO(105) | 5)
+#define PINMUX_GPIO105__FUNC_SPM_JTAG_TDI (MTK_PIN_NO(105) | 6)
+#define PINMUX_GPIO105__FUNC_JTDI_SEL1 (MTK_PIN_NO(105) | 7)
+
+#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define PINMUX_GPIO106__FUNC_SPI0_A_CLK (MTK_PIN_NO(106) | 1)
+#define PINMUX_GPIO106__FUNC_SCP_SPI0_CK (MTK_PIN_NO(106) | 2)
+#define PINMUX_GPIO106__FUNC_SCP_SCL0 (MTK_PIN_NO(106) | 3)
+#define PINMUX_GPIO106__FUNC_DFD_TCK_XI (MTK_PIN_NO(106) | 5)
+#define PINMUX_GPIO106__FUNC_SPM_JTAG_TCK (MTK_PIN_NO(106) | 6)
+#define PINMUX_GPIO106__FUNC_JTCK_SEL1 (MTK_PIN_NO(106) | 7)
+
+#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define PINMUX_GPIO107__FUNC_DMIC_CLK (MTK_PIN_NO(107) | 1)
+#define PINMUX_GPIO107__FUNC_PWM_0 (MTK_PIN_NO(107) | 2)
+#define PINMUX_GPIO107__FUNC_CLKM2 (MTK_PIN_NO(107) | 3)
+#define PINMUX_GPIO107__FUNC_SPI5_B_MI (MTK_PIN_NO(107) | 4)
+#define PINMUX_GPIO107__FUNC_SPM_JTAG_TRSTN (MTK_PIN_NO(107) | 6)
+#define PINMUX_GPIO107__FUNC_JTRSTN_SEL1 (MTK_PIN_NO(107) | 7)
+
+#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define PINMUX_GPIO108__FUNC_DMIC_DAT (MTK_PIN_NO(108) | 1)
+#define PINMUX_GPIO108__FUNC_PWM_1 (MTK_PIN_NO(108) | 2)
+#define PINMUX_GPIO108__FUNC_CLKM3 (MTK_PIN_NO(108) | 3)
+#define PINMUX_GPIO108__FUNC_SPI5_B_MO (MTK_PIN_NO(108) | 4)
+#define PINMUX_GPIO108__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(108) | 7)
+
+#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define PINMUX_GPIO109__FUNC_I2S1_MCK (MTK_PIN_NO(109) | 1)
+#define PINMUX_GPIO109__FUNC_I2S3_MCK (MTK_PIN_NO(109) | 2)
+#define PINMUX_GPIO109__FUNC_I2S2_MCK (MTK_PIN_NO(109) | 3)
+#define PINMUX_GPIO109__FUNC_DP_TX_HPD (MTK_PIN_NO(109) | 4)
+#define PINMUX_GPIO109__FUNC_I2S2_MCK_A (MTK_PIN_NO(109) | 5)
+#define PINMUX_GPIO109__FUNC_SRCLKENAI0 (MTK_PIN_NO(109) | 6)
+#define PINMUX_GPIO109__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(109) | 7)
+
+#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define PINMUX_GPIO110__FUNC_I2S1_BCK (MTK_PIN_NO(110) | 1)
+#define PINMUX_GPIO110__FUNC_I2S3_BCK (MTK_PIN_NO(110) | 2)
+#define PINMUX_GPIO110__FUNC_I2S2_BCK (MTK_PIN_NO(110) | 3)
+#define PINMUX_GPIO110__FUNC_PCM0_CLK (MTK_PIN_NO(110) | 4)
+#define PINMUX_GPIO110__FUNC_I2S2_BCK_A (MTK_PIN_NO(110) | 5)
+#define PINMUX_GPIO110__FUNC_CONN_BGF_MCU_TDO (MTK_PIN_NO(110) | 6)
+
+#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define PINMUX_GPIO111__FUNC_I2S1_LRCK (MTK_PIN_NO(111) | 1)
+#define PINMUX_GPIO111__FUNC_I2S3_LRCK (MTK_PIN_NO(111) | 2)
+#define PINMUX_GPIO111__FUNC_I2S2_LRCK (MTK_PIN_NO(111) | 3)
+#define PINMUX_GPIO111__FUNC_PCM0_SYNC (MTK_PIN_NO(111) | 4)
+#define PINMUX_GPIO111__FUNC_I2S2_LRCK_A (MTK_PIN_NO(111) | 5)
+#define PINMUX_GPIO111__FUNC_CONN_BGF_MCU_TDI (MTK_PIN_NO(111) | 6)
+
+#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define PINMUX_GPIO112__FUNC_I2S2_DI (MTK_PIN_NO(112) | 1)
+#define PINMUX_GPIO112__FUNC_I2S0_DI (MTK_PIN_NO(112) | 2)
+#define PINMUX_GPIO112__FUNC_I2S2_DI2 (MTK_PIN_NO(112) | 3)
+#define PINMUX_GPIO112__FUNC_PCM0_DI (MTK_PIN_NO(112) | 4)
+#define PINMUX_GPIO112__FUNC_I2S2_DI_A (MTK_PIN_NO(112) | 5)
+#define PINMUX_GPIO112__FUNC_CONN_BGF_MCU_TMS (MTK_PIN_NO(112) | 6)
+
+#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define PINMUX_GPIO113__FUNC_I2S1_DO (MTK_PIN_NO(113) | 1)
+#define PINMUX_GPIO113__FUNC_I2S3_DO (MTK_PIN_NO(113) | 2)
+#define PINMUX_GPIO113__FUNC_I2S5_DO (MTK_PIN_NO(113) | 3)
+#define PINMUX_GPIO113__FUNC_PCM0_DO (MTK_PIN_NO(113) | 4)
+#define PINMUX_GPIO113__FUNC_I2S2_DI2 (MTK_PIN_NO(113) | 5)
+#define PINMUX_GPIO113__FUNC_CONN_BGF_MCU_TCK (MTK_PIN_NO(113) | 6)
+
+#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define PINMUX_GPIO114__FUNC_SPI2_MI (MTK_PIN_NO(114) | 1)
+#define PINMUX_GPIO114__FUNC_SCP_SPI2_MI (MTK_PIN_NO(114) | 2)
+#define PINMUX_GPIO114__FUNC_CONN_BGF_MCU_TRST_B (MTK_PIN_NO(114) | 6)
+
+#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define PINMUX_GPIO115__FUNC_SPI2_CSB (MTK_PIN_NO(115) | 1)
+#define PINMUX_GPIO115__FUNC_SCP_SPI2_CS (MTK_PIN_NO(115) | 2)
+#define PINMUX_GPIO115__FUNC_CONN_BGF_MCU_DBGI_N (MTK_PIN_NO(115) | 6)
+
+#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define PINMUX_GPIO116__FUNC_SPI2_MO (MTK_PIN_NO(116) | 1)
+#define PINMUX_GPIO116__FUNC_SCP_SPI2_MO (MTK_PIN_NO(116) | 2)
+#define PINMUX_GPIO116__FUNC_SCP_SDA1 (MTK_PIN_NO(116) | 3)
+#define PINMUX_GPIO116__FUNC_CONN_BGF_MCU_DBGACK_N (MTK_PIN_NO(116) | 6)
+
+#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define PINMUX_GPIO117__FUNC_SPI2_CLK (MTK_PIN_NO(117) | 1)
+#define PINMUX_GPIO117__FUNC_SCP_SPI2_CK (MTK_PIN_NO(117) | 2)
+#define PINMUX_GPIO117__FUNC_SCP_SCL1 (MTK_PIN_NO(117) | 3)
+
+#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define PINMUX_GPIO118__FUNC_SCL1 (MTK_PIN_NO(118) | 1)
+#define PINMUX_GPIO118__FUNC_SCP_SCL0 (MTK_PIN_NO(118) | 2)
+#define PINMUX_GPIO118__FUNC_SCP_SCL1 (MTK_PIN_NO(118) | 3)
+
+#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define PINMUX_GPIO119__FUNC_SDA1 (MTK_PIN_NO(119) | 1)
+#define PINMUX_GPIO119__FUNC_SCP_SDA0 (MTK_PIN_NO(119) | 2)
+#define PINMUX_GPIO119__FUNC_SCP_SDA1 (MTK_PIN_NO(119) | 3)
+
+#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define PINMUX_GPIO120__FUNC_SCL9 (MTK_PIN_NO(120) | 1)
+
+#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define PINMUX_GPIO121__FUNC_SDA9 (MTK_PIN_NO(121) | 1)
+
+#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define PINMUX_GPIO122__FUNC_SCL8 (MTK_PIN_NO(122) | 1)
+
+#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define PINMUX_GPIO123__FUNC_SDA8 (MTK_PIN_NO(123) | 1)
+
+#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define PINMUX_GPIO124__FUNC_SCL7 (MTK_PIN_NO(124) | 1)
+#define PINMUX_GPIO124__FUNC_DMIC1_CLK (MTK_PIN_NO(124) | 2)
+
+#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define PINMUX_GPIO125__FUNC_SDA7 (MTK_PIN_NO(125) | 1)
+#define PINMUX_GPIO125__FUNC_DMIC1_DAT (MTK_PIN_NO(125) | 2)
+
+#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define PINMUX_GPIO126__FUNC_CMFLASH0 (MTK_PIN_NO(126) | 1)
+#define PINMUX_GPIO126__FUNC_PWM_2 (MTK_PIN_NO(126) | 2)
+#define PINMUX_GPIO126__FUNC_TP_UCTS1_AO (MTK_PIN_NO(126) | 3)
+#define PINMUX_GPIO126__FUNC_UCTS0 (MTK_PIN_NO(126) | 4)
+#define PINMUX_GPIO126__FUNC_SCL11 (MTK_PIN_NO(126) | 5)
+#define PINMUX_GPIO126__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(126) | 6)
+
+#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define PINMUX_GPIO127__FUNC_CMFLASH1 (MTK_PIN_NO(127) | 1)
+#define PINMUX_GPIO127__FUNC_PWM_3 (MTK_PIN_NO(127) | 2)
+#define PINMUX_GPIO127__FUNC_TP_URTS1_AO (MTK_PIN_NO(127) | 3)
+#define PINMUX_GPIO127__FUNC_URTS0 (MTK_PIN_NO(127) | 4)
+#define PINMUX_GPIO127__FUNC_SDA11 (MTK_PIN_NO(127) | 5)
+#define PINMUX_GPIO127__FUNC_MD32_1_GPIO1 (MTK_PIN_NO(127) | 6)
+
+#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define PINMUX_GPIO128__FUNC_CMFLASH2 (MTK_PIN_NO(128) | 1)
+#define PINMUX_GPIO128__FUNC_PWM_0 (MTK_PIN_NO(128) | 2)
+#define PINMUX_GPIO128__FUNC_TP_UCTS2_AO (MTK_PIN_NO(128) | 3)
+#define PINMUX_GPIO128__FUNC_UCTS1 (MTK_PIN_NO(128) | 4)
+#define PINMUX_GPIO128__FUNC_SCL12 (MTK_PIN_NO(128) | 5)
+#define PINMUX_GPIO128__FUNC_MD32_1_GPIO2 (MTK_PIN_NO(128) | 6)
+
+#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define PINMUX_GPIO129__FUNC_CMFLASH3 (MTK_PIN_NO(129) | 1)
+#define PINMUX_GPIO129__FUNC_PWM_1 (MTK_PIN_NO(129) | 2)
+#define PINMUX_GPIO129__FUNC_TP_URTS2_AO (MTK_PIN_NO(129) | 3)
+#define PINMUX_GPIO129__FUNC_URTS1 (MTK_PIN_NO(129) | 4)
+#define PINMUX_GPIO129__FUNC_SDA12 (MTK_PIN_NO(129) | 5)
+
+#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define PINMUX_GPIO130__FUNC_CMVREF0 (MTK_PIN_NO(130) | 1)
+#define PINMUX_GPIO130__FUNC_ANT_SEL10 (MTK_PIN_NO(130) | 2)
+#define PINMUX_GPIO130__FUNC_SCP_JTAG0_TDO (MTK_PIN_NO(130) | 3)
+#define PINMUX_GPIO130__FUNC_MD32_0_JTAG_TDO (MTK_PIN_NO(130) | 4)
+#define PINMUX_GPIO130__FUNC_SCL11 (MTK_PIN_NO(130) | 5)
+#define PINMUX_GPIO130__FUNC_CONN_WF_MCU_TDO (MTK_PIN_NO(130) | 6)
+#define PINMUX_GPIO130__FUNC_DBG_MON_A23 (MTK_PIN_NO(130) | 7)
+
+#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define PINMUX_GPIO131__FUNC_CMVREF1 (MTK_PIN_NO(131) | 1)
+#define PINMUX_GPIO131__FUNC_ANT_SEL11 (MTK_PIN_NO(131) | 2)
+#define PINMUX_GPIO131__FUNC_SCP_JTAG0_TDI (MTK_PIN_NO(131) | 3)
+#define PINMUX_GPIO131__FUNC_MD32_0_JTAG_TDI (MTK_PIN_NO(131) | 4)
+#define PINMUX_GPIO131__FUNC_SDA11 (MTK_PIN_NO(131) | 5)
+#define PINMUX_GPIO131__FUNC_CONN_WF_MCU_TDI (MTK_PIN_NO(131) | 6)
+#define PINMUX_GPIO131__FUNC_DBG_MON_A26 (MTK_PIN_NO(131) | 7)
+
+#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define PINMUX_GPIO132__FUNC_CMVREF2 (MTK_PIN_NO(132) | 1)
+#define PINMUX_GPIO132__FUNC_ANT_SEL12 (MTK_PIN_NO(132) | 2)
+#define PINMUX_GPIO132__FUNC_SCP_JTAG0_TMS (MTK_PIN_NO(132) | 3)
+#define PINMUX_GPIO132__FUNC_MD32_0_JTAG_TMS (MTK_PIN_NO(132) | 4)
+#define PINMUX_GPIO132__FUNC_CONN_WF_MCU_TMS (MTK_PIN_NO(132) | 6)
+#define PINMUX_GPIO132__FUNC_DBG_MON_A28 (MTK_PIN_NO(132) | 7)
+
+#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define PINMUX_GPIO133__FUNC_CMVREF3 (MTK_PIN_NO(133) | 1)
+#define PINMUX_GPIO133__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(133) | 2)
+#define PINMUX_GPIO133__FUNC_SCP_JTAG0_TCK (MTK_PIN_NO(133) | 3)
+#define PINMUX_GPIO133__FUNC_MD32_0_JTAG_TCK (MTK_PIN_NO(133) | 4)
+#define PINMUX_GPIO133__FUNC_CONN_WF_MCU_TCK (MTK_PIN_NO(133) | 6)
+#define PINMUX_GPIO133__FUNC_DBG_MON_A24 (MTK_PIN_NO(133) | 7)
+
+#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define PINMUX_GPIO134__FUNC_CMVREF4 (MTK_PIN_NO(134) | 1)
+#define PINMUX_GPIO134__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(134) | 2)
+#define PINMUX_GPIO134__FUNC_SCP_JTAG0_TRSTN (MTK_PIN_NO(134) | 3)
+#define PINMUX_GPIO134__FUNC_MD32_0_JTAG_TRST (MTK_PIN_NO(134) | 4)
+#define PINMUX_GPIO134__FUNC_CONN_WF_MCU_TRST_B (MTK_PIN_NO(134) | 6)
+#define PINMUX_GPIO134__FUNC_DBG_MON_A27 (MTK_PIN_NO(134) | 7)
+
+#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define PINMUX_GPIO135__FUNC_PWM_0 (MTK_PIN_NO(135) | 1)
+#define PINMUX_GPIO135__FUNC_SRCLKENAI1 (MTK_PIN_NO(135) | 2)
+#define PINMUX_GPIO135__FUNC_MD_URXD0 (MTK_PIN_NO(135) | 3)
+#define PINMUX_GPIO135__FUNC_MD32_0_RXD (MTK_PIN_NO(135) | 4)
+#define PINMUX_GPIO135__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(135) | 5)
+#define PINMUX_GPIO135__FUNC_CONN_WF_MCU_DBGI_N (MTK_PIN_NO(135) | 6)
+#define PINMUX_GPIO135__FUNC_DBG_MON_A29 (MTK_PIN_NO(135) | 7)
+
+#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define PINMUX_GPIO136__FUNC_CMMCLK3 (MTK_PIN_NO(136) | 1)
+#define PINMUX_GPIO136__FUNC_CLKM1 (MTK_PIN_NO(136) | 2)
+#define PINMUX_GPIO136__FUNC_MD_UTXD0 (MTK_PIN_NO(136) | 3)
+#define PINMUX_GPIO136__FUNC_MD32_0_TXD (MTK_PIN_NO(136) | 4)
+#define PINMUX_GPIO136__FUNC_CONN_BT_TXD (MTK_PIN_NO(136) | 5)
+#define PINMUX_GPIO136__FUNC_CONN_WF_MCU_DBGACK_N (MTK_PIN_NO(136) | 6)
+#define PINMUX_GPIO136__FUNC_DBG_MON_A25 (MTK_PIN_NO(136) | 7)
+
+#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define PINMUX_GPIO137__FUNC_CMMCLK4 (MTK_PIN_NO(137) | 1)
+#define PINMUX_GPIO137__FUNC_CLKM2 (MTK_PIN_NO(137) | 2)
+#define PINMUX_GPIO137__FUNC_MD_URXD1 (MTK_PIN_NO(137) | 3)
+#define PINMUX_GPIO137__FUNC_MD32_1_RXD (MTK_PIN_NO(137) | 4)
+#define PINMUX_GPIO137__FUNC_ILDO_DOUT0 (MTK_PIN_NO(137) | 5)
+#define PINMUX_GPIO137__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(137) | 6)
+
+#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define PINMUX_GPIO138__FUNC_CMMCLK5 (MTK_PIN_NO(138) | 1)
+#define PINMUX_GPIO138__FUNC_CLKM3 (MTK_PIN_NO(138) | 2)
+#define PINMUX_GPIO138__FUNC_MD_UTXD1 (MTK_PIN_NO(138) | 3)
+#define PINMUX_GPIO138__FUNC_MD32_1_TXD (MTK_PIN_NO(138) | 4)
+#define PINMUX_GPIO138__FUNC_ILDO_DOUT1 (MTK_PIN_NO(138) | 5)
+#define PINMUX_GPIO138__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(138) | 6)
+
+#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define PINMUX_GPIO139__FUNC_SCL4 (MTK_PIN_NO(139) | 1)
+
+#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define PINMUX_GPIO140__FUNC_SDA4 (MTK_PIN_NO(140) | 1)
+
+#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define PINMUX_GPIO141__FUNC_SCL2 (MTK_PIN_NO(141) | 1)
+
+#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define PINMUX_GPIO142__FUNC_SDA2 (MTK_PIN_NO(142) | 1)
+
+#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define PINMUX_GPIO143__FUNC_CMVREF0 (MTK_PIN_NO(143) | 1)
+#define PINMUX_GPIO143__FUNC_SPI3_CLK (MTK_PIN_NO(143) | 2)
+#define PINMUX_GPIO143__FUNC_ADSP_JTAG1_TDO (MTK_PIN_NO(143) | 3)
+#define PINMUX_GPIO143__FUNC_SCP_JTAG1_TDO (MTK_PIN_NO(143) | 4)
+#define PINMUX_GPIO143__FUNC_MD32_1_JTAG_TDO (MTK_PIN_NO(143) | 5)
+#define PINMUX_GPIO143__FUNC_CONN_BGF_DSP_L5_JDO (MTK_PIN_NO(143) | 6)
+
+#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define PINMUX_GPIO144__FUNC_CMVREF1 (MTK_PIN_NO(144) | 1)
+#define PINMUX_GPIO144__FUNC_SPI3_CSB (MTK_PIN_NO(144) | 2)
+#define PINMUX_GPIO144__FUNC_ADSP_JTAG1_TDI (MTK_PIN_NO(144) | 3)
+#define PINMUX_GPIO144__FUNC_SCP_JTAG1_TDI (MTK_PIN_NO(144) | 4)
+#define PINMUX_GPIO144__FUNC_MD32_1_JTAG_TDI (MTK_PIN_NO(144) | 5)
+#define PINMUX_GPIO144__FUNC_CONN_BGF_DSP_L5_JDI (MTK_PIN_NO(144) | 6)
+
+#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define PINMUX_GPIO145__FUNC_CMVREF2 (MTK_PIN_NO(145) | 1)
+#define PINMUX_GPIO145__FUNC_SPI3_MI (MTK_PIN_NO(145) | 2)
+#define PINMUX_GPIO145__FUNC_ADSP_JTAG1_TMS (MTK_PIN_NO(145) | 3)
+#define PINMUX_GPIO145__FUNC_SCP_JTAG1_TMS (MTK_PIN_NO(145) | 4)
+#define PINMUX_GPIO145__FUNC_MD32_1_JTAG_TMS (MTK_PIN_NO(145) | 5)
+#define PINMUX_GPIO145__FUNC_CONN_BGF_DSP_L5_JMS (MTK_PIN_NO(145) | 6)
+
+#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define PINMUX_GPIO146__FUNC_CMVREF3 (MTK_PIN_NO(146) | 1)
+#define PINMUX_GPIO146__FUNC_SPI3_MO (MTK_PIN_NO(146) | 2)
+#define PINMUX_GPIO146__FUNC_ADSP_JTAG1_TCK (MTK_PIN_NO(146) | 3)
+#define PINMUX_GPIO146__FUNC_SCP_JTAG1_TCK (MTK_PIN_NO(146) | 4)
+#define PINMUX_GPIO146__FUNC_MD32_1_JTAG_TCK (MTK_PIN_NO(146) | 5)
+#define PINMUX_GPIO146__FUNC_CONN_BGF_DSP_L5_JCK (MTK_PIN_NO(146) | 6)
+
+#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define PINMUX_GPIO147__FUNC_CMVREF4 (MTK_PIN_NO(147) | 1)
+#define PINMUX_GPIO147__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(147) | 2)
+#define PINMUX_GPIO147__FUNC_ADSP_JTAG1_TRSTN (MTK_PIN_NO(147) | 3)
+#define PINMUX_GPIO147__FUNC_SCP_JTAG1_TRSTN (MTK_PIN_NO(147) | 4)
+#define PINMUX_GPIO147__FUNC_MD32_1_JTAG_TRST (MTK_PIN_NO(147) | 5)
+#define PINMUX_GPIO147__FUNC_CONN_BGF_DSP_L5_JINTP (MTK_PIN_NO(147) | 6)
+
+#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define PINMUX_GPIO148__FUNC_PWM_1 (MTK_PIN_NO(148) | 1)
+#define PINMUX_GPIO148__FUNC_AGPS_SYNC (MTK_PIN_NO(148) | 2)
+#define PINMUX_GPIO148__FUNC_CMMCLK5 (MTK_PIN_NO(148) | 3)
+#define PINMUX_GPIO148__FUNC_CONN_WF_MCU_AICE_TMSC (MTK_PIN_NO(148) | 6)
+
+#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define PINMUX_GPIO149__FUNC_CMMCLK0 (MTK_PIN_NO(149) | 1)
+#define PINMUX_GPIO149__FUNC_CLKM0 (MTK_PIN_NO(149) | 2)
+#define PINMUX_GPIO149__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(149) | 3)
+#define PINMUX_GPIO149__FUNC_CONN_WF_MCU_AICE_TCKC (MTK_PIN_NO(149) | 6)
+
+#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define PINMUX_GPIO150__FUNC_CMMCLK1 (MTK_PIN_NO(150) | 1)
+#define PINMUX_GPIO150__FUNC_CLKM1 (MTK_PIN_NO(150) | 2)
+#define PINMUX_GPIO150__FUNC_MD32_0_GPIO1 (MTK_PIN_NO(150) | 3)
+#define PINMUX_GPIO150__FUNC_CONN_BGF_MCU_AICE_TMSC (MTK_PIN_NO(150) | 6)
+
+#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define PINMUX_GPIO151__FUNC_CMMCLK2 (MTK_PIN_NO(151) | 1)
+#define PINMUX_GPIO151__FUNC_CLKM2 (MTK_PIN_NO(151) | 2)
+#define PINMUX_GPIO151__FUNC_MD32_0_GPIO2 (MTK_PIN_NO(151) | 3)
+#define PINMUX_GPIO151__FUNC_CONN_BGF_MCU_AICE_TCKC (MTK_PIN_NO(151) | 6)
+
+#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define PINMUX_GPIO152__FUNC_KPROW1 (MTK_PIN_NO(152) | 1)
+#define PINMUX_GPIO152__FUNC_PWM_2 (MTK_PIN_NO(152) | 2)
+#define PINMUX_GPIO152__FUNC_IDDIG (MTK_PIN_NO(152) | 3)
+#define PINMUX_GPIO152__FUNC_DP_TX_HPD (MTK_PIN_NO(152) | 4)
+#define PINMUX_GPIO152__FUNC_DSI1_TE (MTK_PIN_NO(152) | 5)
+#define PINMUX_GPIO152__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(152) | 6)
+#define PINMUX_GPIO152__FUNC_DBG_MON_B2 (MTK_PIN_NO(152) | 7)
+
+#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define PINMUX_GPIO153__FUNC_KPROW0 (MTK_PIN_NO(153) | 1)
+#define PINMUX_GPIO153__FUNC_DBG_MON_B1 (MTK_PIN_NO(153) | 7)
+
+#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define PINMUX_GPIO154__FUNC_KPCOL0 (MTK_PIN_NO(154) | 1)
+#define PINMUX_GPIO154__FUNC_DBG_MON_A32 (MTK_PIN_NO(154) | 7)
+
+#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define PINMUX_GPIO155__FUNC_KPCOL1 (MTK_PIN_NO(155) | 1)
+#define PINMUX_GPIO155__FUNC_PWM_3 (MTK_PIN_NO(155) | 2)
+#define PINMUX_GPIO155__FUNC_USB_DRVVBUS (MTK_PIN_NO(155) | 3)
+#define PINMUX_GPIO155__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(155) | 4)
+#define PINMUX_GPIO155__FUNC_LCM1_RST (MTK_PIN_NO(155) | 5)
+#define PINMUX_GPIO155__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(155) | 6)
+#define PINMUX_GPIO155__FUNC_DBG_MON_B0 (MTK_PIN_NO(155) | 7)
+
+#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define PINMUX_GPIO156__FUNC_SPI1_A_CLK (MTK_PIN_NO(156) | 1)
+#define PINMUX_GPIO156__FUNC_SCP_SPI1_A_CK (MTK_PIN_NO(156) | 2)
+#define PINMUX_GPIO156__FUNC_MRG_CLK (MTK_PIN_NO(156) | 3)
+#define PINMUX_GPIO156__FUNC_AGPS_SYNC (MTK_PIN_NO(156) | 4)
+#define PINMUX_GPIO156__FUNC_SCL12 (MTK_PIN_NO(156) | 5)
+#define PINMUX_GPIO156__FUNC_DBG_MON_B3 (MTK_PIN_NO(156) | 7)
+
+#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define PINMUX_GPIO157__FUNC_SPI1_A_CSB (MTK_PIN_NO(157) | 1)
+#define PINMUX_GPIO157__FUNC_SCP_SPI1_A_CS (MTK_PIN_NO(157) | 2)
+#define PINMUX_GPIO157__FUNC_MRG_SYNC (MTK_PIN_NO(157) | 3)
+#define PINMUX_GPIO157__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(157) | 4)
+#define PINMUX_GPIO157__FUNC_SDA12 (MTK_PIN_NO(157) | 5)
+#define PINMUX_GPIO157__FUNC_DBG_MON_B4 (MTK_PIN_NO(157) | 7)
+
+#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define PINMUX_GPIO158__FUNC_SPI1_A_MI (MTK_PIN_NO(158) | 1)
+#define PINMUX_GPIO158__FUNC_SCP_SPI1_A_MI (MTK_PIN_NO(158) | 2)
+#define PINMUX_GPIO158__FUNC_MRG_DI (MTK_PIN_NO(158) | 3)
+#define PINMUX_GPIO158__FUNC_PTA_RXD (MTK_PIN_NO(158) | 4)
+#define PINMUX_GPIO158__FUNC_SCL13 (MTK_PIN_NO(158) | 5)
+#define PINMUX_GPIO158__FUNC_DBG_MON_B5 (MTK_PIN_NO(158) | 7)
+
+#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define PINMUX_GPIO159__FUNC_SPI1_A_MO (MTK_PIN_NO(159) | 1)
+#define PINMUX_GPIO159__FUNC_SCP_SPI1_A_MO (MTK_PIN_NO(159) | 2)
+#define PINMUX_GPIO159__FUNC_MRG_DO (MTK_PIN_NO(159) | 3)
+#define PINMUX_GPIO159__FUNC_PTA_TXD (MTK_PIN_NO(159) | 4)
+#define PINMUX_GPIO159__FUNC_SDA13 (MTK_PIN_NO(159) | 5)
+#define PINMUX_GPIO159__FUNC_DBG_MON_B6 (MTK_PIN_NO(159) | 7)
+
+#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define PINMUX_GPIO160__FUNC_SCL3 (MTK_PIN_NO(160) | 1)
+#define PINMUX_GPIO160__FUNC_SCP_SCL0 (MTK_PIN_NO(160) | 2)
+#define PINMUX_GPIO160__FUNC_SCP_SCL1 (MTK_PIN_NO(160) | 3)
+
+#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define PINMUX_GPIO161__FUNC_SDA3 (MTK_PIN_NO(161) | 1)
+#define PINMUX_GPIO161__FUNC_SCP_SDA0 (MTK_PIN_NO(161) | 2)
+#define PINMUX_GPIO161__FUNC_SCP_SDA1 (MTK_PIN_NO(161) | 3)
+
+#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define PINMUX_GPIO162__FUNC_ANT_SEL0 (MTK_PIN_NO(162) | 1)
+#define PINMUX_GPIO162__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(162) | 2)
+#define PINMUX_GPIO162__FUNC_DBG_MON_B7 (MTK_PIN_NO(162) | 7)
+
+#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define PINMUX_GPIO163__FUNC_ANT_SEL1 (MTK_PIN_NO(163) | 1)
+#define PINMUX_GPIO163__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(163) | 2)
+#define PINMUX_GPIO163__FUNC_DBG_MON_B8 (MTK_PIN_NO(163) | 7)
+
+#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define PINMUX_GPIO164__FUNC_ANT_SEL2 (MTK_PIN_NO(164) | 1)
+#define PINMUX_GPIO164__FUNC_SCP_SPI1_B_CK (MTK_PIN_NO(164) | 2)
+#define PINMUX_GPIO164__FUNC_TP_URXD1_AO (MTK_PIN_NO(164) | 3)
+#define PINMUX_GPIO164__FUNC_UCTS0 (MTK_PIN_NO(164) | 5)
+#define PINMUX_GPIO164__FUNC_DBG_MON_B9 (MTK_PIN_NO(164) | 7)
+
+#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define PINMUX_GPIO165__FUNC_ANT_SEL3 (MTK_PIN_NO(165) | 1)
+#define PINMUX_GPIO165__FUNC_SCP_SPI1_B_CS (MTK_PIN_NO(165) | 2)
+#define PINMUX_GPIO165__FUNC_TP_UTXD1_AO (MTK_PIN_NO(165) | 3)
+#define PINMUX_GPIO165__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(165) | 4)
+#define PINMUX_GPIO165__FUNC_URTS0 (MTK_PIN_NO(165) | 5)
+#define PINMUX_GPIO165__FUNC_DBG_MON_B10 (MTK_PIN_NO(165) | 7)
+
+#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define PINMUX_GPIO166__FUNC_ANT_SEL4 (MTK_PIN_NO(166) | 1)
+#define PINMUX_GPIO166__FUNC_SCP_SPI1_B_MI (MTK_PIN_NO(166) | 2)
+#define PINMUX_GPIO166__FUNC_TP_URXD2_AO (MTK_PIN_NO(166) | 3)
+#define PINMUX_GPIO166__FUNC_SRCLKENAI1 (MTK_PIN_NO(166) | 4)
+#define PINMUX_GPIO166__FUNC_UCTS1 (MTK_PIN_NO(166) | 5)
+#define PINMUX_GPIO166__FUNC_DBG_MON_B11 (MTK_PIN_NO(166) | 7)
+
+#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define PINMUX_GPIO167__FUNC_ANT_SEL5 (MTK_PIN_NO(167) | 1)
+#define PINMUX_GPIO167__FUNC_SCP_SPI1_B_MO (MTK_PIN_NO(167) | 2)
+#define PINMUX_GPIO167__FUNC_TP_UTXD2_AO (MTK_PIN_NO(167) | 3)
+#define PINMUX_GPIO167__FUNC_SRCLKENAI0 (MTK_PIN_NO(167) | 4)
+#define PINMUX_GPIO167__FUNC_URTS1 (MTK_PIN_NO(167) | 5)
+#define PINMUX_GPIO167__FUNC_DBG_MON_B12 (MTK_PIN_NO(167) | 7)
+
+#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define PINMUX_GPIO168__FUNC_ANT_SEL6 (MTK_PIN_NO(168) | 1)
+#define PINMUX_GPIO168__FUNC_SPI0_B_CLK (MTK_PIN_NO(168) | 2)
+#define PINMUX_GPIO168__FUNC_TP_UCTS1_AO (MTK_PIN_NO(168) | 3)
+#define PINMUX_GPIO168__FUNC_KPCOL2 (MTK_PIN_NO(168) | 4)
+#define PINMUX_GPIO168__FUNC_MD_UCTS0 (MTK_PIN_NO(168) | 5)
+#define PINMUX_GPIO168__FUNC_SCL12 (MTK_PIN_NO(168) | 6)
+#define PINMUX_GPIO168__FUNC_DBG_MON_B13 (MTK_PIN_NO(168) | 7)
+
+#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define PINMUX_GPIO169__FUNC_ANT_SEL7 (MTK_PIN_NO(169) | 1)
+#define PINMUX_GPIO169__FUNC_SPI0_B_CSB (MTK_PIN_NO(169) | 2)
+#define PINMUX_GPIO169__FUNC_TP_URTS1_AO (MTK_PIN_NO(169) | 3)
+#define PINMUX_GPIO169__FUNC_KPROW2 (MTK_PIN_NO(169) | 4)
+#define PINMUX_GPIO169__FUNC_MD_URTS0 (MTK_PIN_NO(169) | 5)
+#define PINMUX_GPIO169__FUNC_SDA12 (MTK_PIN_NO(169) | 6)
+#define PINMUX_GPIO169__FUNC_DBG_MON_B14 (MTK_PIN_NO(169) | 7)
+
+#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define PINMUX_GPIO170__FUNC_ANT_SEL8 (MTK_PIN_NO(170) | 1)
+#define PINMUX_GPIO170__FUNC_SPI0_B_MI (MTK_PIN_NO(170) | 2)
+#define PINMUX_GPIO170__FUNC_TP_UCTS2_AO (MTK_PIN_NO(170) | 3)
+#define PINMUX_GPIO170__FUNC_SRCLKENAI1 (MTK_PIN_NO(170) | 4)
+#define PINMUX_GPIO170__FUNC_MD_UCTS1 (MTK_PIN_NO(170) | 5)
+#define PINMUX_GPIO170__FUNC_SCL13 (MTK_PIN_NO(170) | 6)
+
+#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define PINMUX_GPIO171__FUNC_ANT_SEL9 (MTK_PIN_NO(171) | 1)
+#define PINMUX_GPIO171__FUNC_SPI0_B_MO (MTK_PIN_NO(171) | 2)
+#define PINMUX_GPIO171__FUNC_TP_URTS2_AO (MTK_PIN_NO(171) | 3)
+#define PINMUX_GPIO171__FUNC_SRCLKENAI0 (MTK_PIN_NO(171) | 4)
+#define PINMUX_GPIO171__FUNC_MD_URTS1 (MTK_PIN_NO(171) | 5)
+#define PINMUX_GPIO171__FUNC_SDA13 (MTK_PIN_NO(171) | 6)
+
+#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define PINMUX_GPIO172__FUNC_CONN_TOP_CLK (MTK_PIN_NO(172) | 1)
+#define PINMUX_GPIO172__FUNC_AUXIF_CLK0 (MTK_PIN_NO(172) | 2)
+#define PINMUX_GPIO172__FUNC_DBG_MON_B18 (MTK_PIN_NO(172) | 7)
+
+#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define PINMUX_GPIO173__FUNC_CONN_TOP_DATA (MTK_PIN_NO(173) | 1)
+#define PINMUX_GPIO173__FUNC_AUXIF_ST0 (MTK_PIN_NO(173) | 2)
+#define PINMUX_GPIO173__FUNC_DBG_MON_B19 (MTK_PIN_NO(173) | 7)
+
+#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define PINMUX_GPIO174__FUNC_CONN_HRST_B (MTK_PIN_NO(174) | 1)
+#define PINMUX_GPIO174__FUNC_DBG_MON_B17 (MTK_PIN_NO(174) | 7)
+
+#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define PINMUX_GPIO175__FUNC_CONN_WB_PTA (MTK_PIN_NO(175) | 1)
+#define PINMUX_GPIO175__FUNC_DBG_MON_B20 (MTK_PIN_NO(175) | 7)
+
+#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define PINMUX_GPIO176__FUNC_CONN_BT_CLK (MTK_PIN_NO(176) | 1)
+#define PINMUX_GPIO176__FUNC_AUXIF_CLK1 (MTK_PIN_NO(176) | 2)
+#define PINMUX_GPIO176__FUNC_DBG_MON_B15 (MTK_PIN_NO(176) | 7)
+
+#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define PINMUX_GPIO177__FUNC_CONN_BT_DATA (MTK_PIN_NO(177) | 1)
+#define PINMUX_GPIO177__FUNC_AUXIF_ST1 (MTK_PIN_NO(177) | 2)
+#define PINMUX_GPIO177__FUNC_DBG_MON_B16 (MTK_PIN_NO(177) | 7)
+
+#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define PINMUX_GPIO178__FUNC_CONN_WF_CTRL0 (MTK_PIN_NO(178) | 1)
+#define PINMUX_GPIO178__FUNC_DBG_MON_B21 (MTK_PIN_NO(178) | 7)
+
+#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define PINMUX_GPIO179__FUNC_CONN_WF_CTRL1 (MTK_PIN_NO(179) | 1)
+#define PINMUX_GPIO179__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(179) | 2)
+#define PINMUX_GPIO179__FUNC_DBG_MON_B22 (MTK_PIN_NO(179) | 7)
+
+#define PINMUX_GPIO180__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define PINMUX_GPIO180__FUNC_CONN_WF_CTRL2 (MTK_PIN_NO(180) | 1)
+#define PINMUX_GPIO180__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(180) | 2)
+#define PINMUX_GPIO180__FUNC_DBG_MON_B23 (MTK_PIN_NO(180) | 7)
+
+#define PINMUX_GPIO181__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define PINMUX_GPIO181__FUNC_CONN_WF_CTRL3 (MTK_PIN_NO(181) | 1)
+#define PINMUX_GPIO181__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(181) | 2)
+
+#define PINMUX_GPIO182__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define PINMUX_GPIO182__FUNC_CONN_WF_CTRL4 (MTK_PIN_NO(182) | 1)
+#define PINMUX_GPIO182__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(182) | 2)
+
+#define PINMUX_GPIO183__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define PINMUX_GPIO183__FUNC_MSDC0_CMD (MTK_PIN_NO(183) | 1)
+
+#define PINMUX_GPIO184__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define PINMUX_GPIO184__FUNC_MSDC0_DAT0 (MTK_PIN_NO(184) | 1)
+
+#define PINMUX_GPIO185__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define PINMUX_GPIO185__FUNC_MSDC0_DAT2 (MTK_PIN_NO(185) | 1)
+
+#define PINMUX_GPIO186__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define PINMUX_GPIO186__FUNC_MSDC0_DAT4 (MTK_PIN_NO(186) | 1)
+
+#define PINMUX_GPIO187__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define PINMUX_GPIO187__FUNC_MSDC0_DAT6 (MTK_PIN_NO(187) | 1)
+
+#define PINMUX_GPIO188__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define PINMUX_GPIO188__FUNC_MSDC0_DAT1 (MTK_PIN_NO(188) | 1)
+
+#define PINMUX_GPIO189__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define PINMUX_GPIO189__FUNC_MSDC0_DAT5 (MTK_PIN_NO(189) | 1)
+
+#define PINMUX_GPIO190__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define PINMUX_GPIO190__FUNC_MSDC0_DAT7 (MTK_PIN_NO(190) | 1)
+
+#define PINMUX_GPIO191__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define PINMUX_GPIO191__FUNC_MSDC0_DSL (MTK_PIN_NO(191) | 1)
+#define PINMUX_GPIO191__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(191) | 2)
+#define PINMUX_GPIO191__FUNC_IDDIG (MTK_PIN_NO(191) | 3)
+#define PINMUX_GPIO191__FUNC_DMIC_CLK (MTK_PIN_NO(191) | 4)
+#define PINMUX_GPIO191__FUNC_DSI1_TE (MTK_PIN_NO(191) | 5)
+
+#define PINMUX_GPIO192__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define PINMUX_GPIO192__FUNC_MSDC0_CLK (MTK_PIN_NO(192) | 1)
+#define PINMUX_GPIO192__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(192) | 2)
+#define PINMUX_GPIO192__FUNC_USB_DRVVBUS (MTK_PIN_NO(192) | 3)
+#define PINMUX_GPIO192__FUNC_DMIC_DAT (MTK_PIN_NO(192) | 4)
+#define PINMUX_GPIO192__FUNC_LCM1_RST (MTK_PIN_NO(192) | 5)
+
+#define PINMUX_GPIO193__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define PINMUX_GPIO193__FUNC_MSDC0_DAT3 (MTK_PIN_NO(193) | 1)
+
+#define PINMUX_GPIO194__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define PINMUX_GPIO194__FUNC_MSDC0_RSTB (MTK_PIN_NO(194) | 1)
+
+#define PINMUX_GPIO195__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define PINMUX_GPIO195__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(195) | 1)
+#define PINMUX_GPIO195__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(195) | 2)
+
+#define PINMUX_GPIO196__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define PINMUX_GPIO196__FUNC_AUD_DAT_MOSI2 (MTK_PIN_NO(196) | 1)
+#define PINMUX_GPIO196__FUNC_DBG_MON_B27 (MTK_PIN_NO(196) | 7)
+
+#define PINMUX_GPIO197__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define PINMUX_GPIO197__FUNC_AUD_NLE_MOSI1 (MTK_PIN_NO(197) | 1)
+#define PINMUX_GPIO197__FUNC_AUD_CLK_MISO (MTK_PIN_NO(197) | 2)
+#define PINMUX_GPIO197__FUNC_I2S2_MCK (MTK_PIN_NO(197) | 3)
+#define PINMUX_GPIO197__FUNC_I2S6_MCK (MTK_PIN_NO(197) | 4)
+#define PINMUX_GPIO197__FUNC_I2S8_MCK (MTK_PIN_NO(197) | 5)
+#define PINMUX_GPIO197__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(197) | 6)
+#define PINMUX_GPIO197__FUNC_DBG_MON_B28 (MTK_PIN_NO(197) | 7)
+
+#define PINMUX_GPIO198__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define PINMUX_GPIO198__FUNC_AUD_NLE_MOSI0 (MTK_PIN_NO(198) | 1)
+#define PINMUX_GPIO198__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(198) | 2)
+#define PINMUX_GPIO198__FUNC_I2S2_BCK (MTK_PIN_NO(198) | 3)
+#define PINMUX_GPIO198__FUNC_I2S6_BCK (MTK_PIN_NO(198) | 4)
+#define PINMUX_GPIO198__FUNC_I2S8_BCK (MTK_PIN_NO(198) | 5)
+#define PINMUX_GPIO198__FUNC_DBG_MON_B29 (MTK_PIN_NO(198) | 7)
+
+#define PINMUX_GPIO199__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define PINMUX_GPIO199__FUNC_AUD_DAT_MISO2 (MTK_PIN_NO(199) | 1)
+#define PINMUX_GPIO199__FUNC_I2S2_DI2 (MTK_PIN_NO(199) | 3)
+#define PINMUX_GPIO199__FUNC_DBG_MON_B32 (MTK_PIN_NO(199) | 7)
+
+#define PINMUX_GPIO200__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define PINMUX_GPIO200__FUNC_SCL6 (MTK_PIN_NO(200) | 1)
+#define PINMUX_GPIO200__FUNC_SCP_SCL0 (MTK_PIN_NO(200) | 2)
+#define PINMUX_GPIO200__FUNC_SCP_SCL1 (MTK_PIN_NO(200) | 3)
+#define PINMUX_GPIO200__FUNC_SCL_6306 (MTK_PIN_NO(200) | 4)
+
+#define PINMUX_GPIO201__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define PINMUX_GPIO201__FUNC_SDA6 (MTK_PIN_NO(201) | 1)
+#define PINMUX_GPIO201__FUNC_SCP_SDA0 (MTK_PIN_NO(201) | 2)
+#define PINMUX_GPIO201__FUNC_SCP_SDA1 (MTK_PIN_NO(201) | 3)
+#define PINMUX_GPIO201__FUNC_SDA_6306 (MTK_PIN_NO(201) | 4)
+
+#define PINMUX_GPIO202__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define PINMUX_GPIO202__FUNC_SCL5 (MTK_PIN_NO(202) | 1)
+
+#define PINMUX_GPIO203__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define PINMUX_GPIO203__FUNC_SDA5 (MTK_PIN_NO(203) | 1)
+
+#define PINMUX_GPIO204__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define PINMUX_GPIO204__FUNC_SCL0 (MTK_PIN_NO(204) | 1)
+#define PINMUX_GPIO204__FUNC_SPI4_C_CLK (MTK_PIN_NO(204) | 2)
+#define PINMUX_GPIO204__FUNC_SPI7_B_CLK (MTK_PIN_NO(204) | 3)
+
+#define PINMUX_GPIO205__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define PINMUX_GPIO205__FUNC_SDA0 (MTK_PIN_NO(205) | 1)
+#define PINMUX_GPIO205__FUNC_SPI4_C_CSB (MTK_PIN_NO(205) | 2)
+#define PINMUX_GPIO205__FUNC_SPI7_B_CSB (MTK_PIN_NO(205) | 3)
+
+#define PINMUX_GPIO206__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define PINMUX_GPIO206__FUNC_SRCLKENA0 (MTK_PIN_NO(206) | 1)
+
+#define PINMUX_GPIO207__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define PINMUX_GPIO207__FUNC_SRCLKENA1 (MTK_PIN_NO(207) | 1)
+
+#define PINMUX_GPIO208__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define PINMUX_GPIO208__FUNC_WATCHDOG (MTK_PIN_NO(208) | 1)
+
+#define PINMUX_GPIO209__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define PINMUX_GPIO209__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(209) | 1)
+#define PINMUX_GPIO209__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(209) | 2)
+
+#define PINMUX_GPIO210__FUNC_GPIO210 (MTK_PIN_NO(210) | 0)
+#define PINMUX_GPIO210__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(210) | 1)
+
+#define PINMUX_GPIO211__FUNC_GPIO211 (MTK_PIN_NO(211) | 0)
+#define PINMUX_GPIO211__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(211) | 1)
+#define PINMUX_GPIO211__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(211) | 2)
+
+#define PINMUX_GPIO212__FUNC_GPIO212 (MTK_PIN_NO(212) | 0)
+#define PINMUX_GPIO212__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(212) | 1)
+
+#define PINMUX_GPIO213__FUNC_GPIO213 (MTK_PIN_NO(213) | 0)
+#define PINMUX_GPIO213__FUNC_RTC32K_CK (MTK_PIN_NO(213) | 1)
+
+#define PINMUX_GPIO214__FUNC_GPIO214 (MTK_PIN_NO(214) | 0)
+#define PINMUX_GPIO214__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(214) | 1)
+#define PINMUX_GPIO214__FUNC_I2S1_MCK (MTK_PIN_NO(214) | 3)
+#define PINMUX_GPIO214__FUNC_I2S7_MCK (MTK_PIN_NO(214) | 4)
+#define PINMUX_GPIO214__FUNC_I2S9_MCK (MTK_PIN_NO(214) | 5)
+#define PINMUX_GPIO214__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(214) | 6)
+
+#define PINMUX_GPIO215__FUNC_GPIO215 (MTK_PIN_NO(215) | 0)
+#define PINMUX_GPIO215__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(215) | 1)
+#define PINMUX_GPIO215__FUNC_I2S1_BCK (MTK_PIN_NO(215) | 3)
+#define PINMUX_GPIO215__FUNC_I2S7_BCK (MTK_PIN_NO(215) | 4)
+#define PINMUX_GPIO215__FUNC_I2S9_BCK (MTK_PIN_NO(215) | 5)
+#define PINMUX_GPIO215__FUNC_DBG_MON_B24 (MTK_PIN_NO(215) | 7)
+
+#define PINMUX_GPIO216__FUNC_GPIO216 (MTK_PIN_NO(216) | 0)
+#define PINMUX_GPIO216__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(216) | 1)
+#define PINMUX_GPIO216__FUNC_I2S1_LRCK (MTK_PIN_NO(216) | 3)
+#define PINMUX_GPIO216__FUNC_I2S7_LRCK (MTK_PIN_NO(216) | 4)
+#define PINMUX_GPIO216__FUNC_I2S9_LRCK (MTK_PIN_NO(216) | 5)
+#define PINMUX_GPIO216__FUNC_DBG_MON_B25 (MTK_PIN_NO(216) | 7)
+
+#define PINMUX_GPIO217__FUNC_GPIO217 (MTK_PIN_NO(217) | 0)
+#define PINMUX_GPIO217__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(217) | 1)
+#define PINMUX_GPIO217__FUNC_I2S1_DO (MTK_PIN_NO(217) | 3)
+#define PINMUX_GPIO217__FUNC_I2S7_DO (MTK_PIN_NO(217) | 4)
+#define PINMUX_GPIO217__FUNC_I2S9_DO (MTK_PIN_NO(217) | 5)
+#define PINMUX_GPIO217__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(217) | 6)
+#define PINMUX_GPIO217__FUNC_DBG_MON_B26 (MTK_PIN_NO(217) | 7)
+
+#define PINMUX_GPIO218__FUNC_GPIO218 (MTK_PIN_NO(218) | 0)
+#define PINMUX_GPIO218__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(218) | 1)
+#define PINMUX_GPIO218__FUNC_VOW_DAT_MISO (MTK_PIN_NO(218) | 2)
+#define PINMUX_GPIO218__FUNC_I2S2_LRCK (MTK_PIN_NO(218) | 3)
+#define PINMUX_GPIO218__FUNC_I2S6_LRCK (MTK_PIN_NO(218) | 4)
+#define PINMUX_GPIO218__FUNC_I2S8_LRCK (MTK_PIN_NO(218) | 5)
+#define PINMUX_GPIO218__FUNC_DBG_MON_B30 (MTK_PIN_NO(218) | 7)
+
+#define PINMUX_GPIO219__FUNC_GPIO219 (MTK_PIN_NO(219) | 0)
+#define PINMUX_GPIO219__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(219) | 1)
+#define PINMUX_GPIO219__FUNC_VOW_CLK_MISO (MTK_PIN_NO(219) | 2)
+#define PINMUX_GPIO219__FUNC_I2S2_DI (MTK_PIN_NO(219) | 3)
+#define PINMUX_GPIO219__FUNC_I2S6_DI (MTK_PIN_NO(219) | 4)
+#define PINMUX_GPIO219__FUNC_I2S8_DI (MTK_PIN_NO(219) | 5)
+#define PINMUX_GPIO219__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(219) | 6)
+#define PINMUX_GPIO219__FUNC_DBG_MON_B31 (MTK_PIN_NO(219) | 7)
+
+#endif /* __MT6893-PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index c46682150e50..9f100b18a676 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -75,6 +75,7 @@
 
 	memory@40000000 {
 		reg = <0 0x40000000 0 0x40000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
@@ -148,13 +149,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@0 {
+		switch@1f {
 			compatible = "mediatek,mt7531";
-			reg = <0>;
+			reg = <0x1f>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
-			interrupt-parent = <&pio>;
-			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>;
 			reset-gpios = <&pio 54 0>;
 
 			ports {
@@ -186,6 +186,18 @@
 					label = "lan3";
 				};
 
+				port@5 {
+					reg = <5>;
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";
@@ -308,7 +320,7 @@
 	/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
 	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
 	 */
-	asm_sel {
+	asm-sel-hog {
 		gpio-hog;
 		gpios = <90 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -317,8 +329,8 @@
 	/* eMMC is shared pin with parallel NAND */
 	emmc_pins_default: emmc-pins-default {
 		mux {
-			function = "emmc", "emmc_rst";
-			groups = "emmc";
+			function = "emmc";
+			groups = "emmc", "emmc_rst";
 		};
 
 		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 2dc1bdc74e21..8c3e2e2578bc 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -57,6 +57,7 @@
 
 	memory@40000000 {
 		reg = <0 0x40000000 0 0x20000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
@@ -117,6 +118,18 @@
 		};
 	};
 
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
 	mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -155,6 +168,18 @@
 					label = "wan";
 				};
 
+				port@5 {
+					reg = <5>;
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";
@@ -243,8 +268,8 @@
 	/* eMMC is shared pin with parallel NAND */
 	emmc_pins_default: emmc-pins-default {
 		mux {
-			function = "emmc", "emmc_rst";
-			groups = "emmc";
+			function = "emmc";
+			groups = "emmc", "emmc_rst";
 		};
 
 		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 3ee9266fa8e9..917fa39a74f8 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -252,7 +252,7 @@
 		clock-names = "hif_sel";
 	};
 
-	cir: cir@10009000 {
+	cir: ir-receiver@10009000 {
 		compatible = "mediatek,mt7622-cir";
 		reg = <0 0x10009000 0 0x1000>;
 		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>;
@@ -283,16 +283,14 @@
 		};
 	};
 
-	apmixedsys: apmixedsys@10209000 {
-		compatible = "mediatek,mt7622-apmixedsys",
-			     "syscon";
+	apmixedsys: clock-controller@10209000 {
+		compatible = "mediatek,mt7622-apmixedsys";
 		reg = <0 0x10209000 0 0x1000>;
 		#clock-cells = <1>;
 	};
 
-	topckgen: topckgen@10210000 {
-		compatible = "mediatek,mt7622-topckgen",
-			     "syscon";
+	topckgen: clock-controller@10210000 {
+		compatible = "mediatek,mt7622-topckgen";
 		reg = <0 0x10210000 0 0x1000>;
 		#clock-cells = <1>;
 	};
@@ -515,7 +513,6 @@
 			 <&pericfg CLK_PERI_AUXADC_PD>;
 		clock-names = "therm", "auxadc";
 		resets = <&pericfg MT7622_PERI_THERM_SW_RST>;
-		reset-names = "therm";
 		mediatek,auxadc = <&auxadc>;
 		mediatek,apmixedsys = <&apmixedsys>;
 		nvmem-cells = <&thermal_calibration>;
@@ -734,9 +731,8 @@
 		power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
 	};
 
-	ssusbsys: ssusbsys@1a000000 {
-		compatible = "mediatek,mt7622-ssusbsys",
-			     "syscon";
+	ssusbsys: clock-controller@1a000000 {
+		compatible = "mediatek,mt7622-ssusbsys";
 		reg = <0 0x1a000000 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -793,9 +789,8 @@
 		};
 	};
 
-	pciesys: pciesys@1a100800 {
-		compatible = "mediatek,mt7622-pciesys",
-			     "syscon";
+	pciesys: clock-controller@1a100800 {
+		compatible = "mediatek,mt7622-pciesys";
 		reg = <0 0x1a100800 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -921,12 +916,13 @@
 		};
 	};
 
-	hifsys: syscon@1af00000 {
-		compatible = "mediatek,mt7622-hifsys", "syscon";
+	hifsys: clock-controller@1af00000 {
+		compatible = "mediatek,mt7622-hifsys";
 		reg = <0 0x1af00000 0 0x70>;
+		#clock-cells = <1>;
 	};
 
-	ethsys: syscon@1b000000 {
+	ethsys: clock-controller@1b000000 {
 		compatible = "mediatek,mt7622-ethsys",
 			     "syscon";
 		reg = <0 0x1b000000 0 0x1000>;
@@ -966,9 +962,7 @@
 	};
 
 	eth: ethernet@1b100000 {
-		compatible = "mediatek,mt7622-eth",
-			     "mediatek,mt2701-eth",
-			     "syscon";
+		compatible = "mediatek,mt7622-eth";
 		reg = <0 0x1b100000 0 0x20000>;
 		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts
new file mode 100644
index 000000000000..54101cc08a25
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7981b.dtsi"
+
+/ {
+	compatible = "cudy,wr3000-v1", "mediatek,mt7981b";
+	model = "Cudy WR3000 V1";
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x10000000>;
+		device_type = "memory";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-wps {
+			label = "WPS";
+			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		key-reset {
+			label = "RESET";
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WLAN_2GHZ;
+			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WLAN_5GHZ;
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WAN_ONLINE;
+			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts
new file mode 100644
index 000000000000..4f6cbb491287
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7981b.dtsi"
+
+/ {
+	compatible = "openwrt,one", "mediatek,mt7981b";
+	model = "OpenWrt One";
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x40000000>;
+		device_type = "memory";
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts b/arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts
new file mode 100644
index 000000000000..a314c3e05e50
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7981b.dtsi"
+
+/ {
+	compatible = "xiaomi,ax3000t", "mediatek,mt7981b";
+	model = "Xiaomi AX3000T";
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x10000000>;
+		device_type = "memory";
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
new file mode 100644
index 000000000000..277c11247c13
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+#include <dt-bindings/clock/mediatek,mt7981-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/mt7986-resets.h>
+
+/ {
+	compatible = "mediatek,mt7981b";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+	};
+
+	oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c080000 0 0x200000>; /* GICR */
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		infracfg: clock-controller@10001000 {
+			compatible = "mediatek,mt7981-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: clock-controller@1001b000 {
+			compatible = "mediatek,mt7981-topckgen", "syscon";
+			reg = <0 0x1001b000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: clock-controller@1001e000 {
+			compatible = "mediatek,mt7981-apmixedsys";
+			reg = <0 0x1001e000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwm@10048000 {
+			compatible = "mediatek,mt7981-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_PWM_STA>,
+				 <&infracfg CLK_INFRA_PWM_HCK>,
+				 <&infracfg CLK_INFRA_PWM1_CK>,
+				 <&infracfg CLK_INFRA_PWM2_CK>,
+				 <&infracfg CLK_INFRA_PWM3_CK>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
+			#pwm-cells = <2>;
+		};
+
+		serial@11002000 {
+			compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x100>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		serial@11003000 {
+			compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x100>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		serial@11004000 {
+			compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x100>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c@11007000 {
+			compatible = "mediatek,mt7981-i2c";
+			reg = <0 0x11007000 0 0x1000>,
+			      <0 0x10217080 0 0x80>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_I2C0_CK>,
+				 <&infracfg CLK_INFRA_AP_DMA_CK>,
+				 <&infracfg CLK_INFRA_I2C_MCK_CK>,
+				 <&infracfg CLK_INFRA_I2C_PCK_CK>;
+			clock-names = "main", "dma", "arb", "pmic";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi@11009000 {
+			compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x11009000 0 0x1000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_CB_M_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI2_CK>,
+				 <&infracfg CLK_INFRA_SPI2_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi@1100a000 {
+			compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_CB_M_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI0_CK>,
+				 <&infracfg CLK_INFRA_SPI0_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi@1100b000 {
+			compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_CB_M_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI1_CK>,
+				 <&infracfg CLK_INFRA_SPI1_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		thermal@1100c800 {
+			compatible = "mediatek,mt7981-thermal",
+				     "mediatek,mt7986-thermal";
+			reg = <0 0x1100c800 0 0x800>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_THERM_CK>,
+				 <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "therm", "auxadc";
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+			#thermal-sensor-cells = <1>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+		};
+
+		auxadc: adc@1100d000 {
+			compatible = "mediatek,mt7981-auxadc",
+				     "mediatek,mt7986-auxadc";
+			reg = <0 0x1100d000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@11d00000 {
+			compatible = "mediatek,mt7981-pinctrl";
+			reg = <0 0x11d00000 0 0x1000>,
+			      <0 0x11c00000 0 0x1000>,
+			      <0 0x11c10000 0 0x1000>,
+			      <0 0x11d20000 0 0x1000>,
+			      <0 0x11e00000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio", "iocfg_rt", "iocfg_rm", "iocfg_rb", "iocfg_lb",
+				    "iocfg_bl", "iocfg_tm", "iocfg_tl", "eint";
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			gpio-ranges = <&pio 0 0 56>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		efuse@11f20000 {
+			compatible = "mediatek,mt7981-efuse", "mediatek,efuse";
+			reg = <0 0x11f20000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			thermal_calibration: thermal-calib@274 {
+				reg = <0x274 0xc>;
+			};
+		};
+
+		clock-controller@15000000 {
+			compatible = "mediatek,mt7981-ethsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		wifi@18000000 {
+			compatible = "mediatek,mt7981-wmac";
+			reg = <0 0x18000000 0 0x1000000>,
+			      <0 0x10003000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_NETSYS_MCU_SEL>,
+				 <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
+			clock-names = "mcu", "ap2conn";
+			resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
+			reset-names = "consys";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
new file mode 100644
index 000000000000..30805a610262
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	compatible = "acelink,ew-7886cax", "mediatek,mt7986a";
+	model = "Acelink EW-7886CAX";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x20000000>;
+		device_type = "memory";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-restart {
+			label = "Reset";
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy6>;
+		nvmem-cells = <&macaddr>;
+		nvmem-cell-names = "mac-address";
+	};
+
+	mdio-bus {
+		reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <50000>;
+		reset-post-delay-us = <20000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy6: phy@6 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <6>;
+		};
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x100000>;
+				label = "bootloader";
+				read-only;
+			};
+
+			partition@100000 {
+				reg = <0x100000 0x80000>;
+				label = "u-boot-env";
+			};
+
+			partition@180000 {
+				compatible = "nvmem-cells";
+				reg = <0x180000 0x200000>;
+				label = "factory";
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom: eeprom@0 {
+						reg = <0x0 0x1000>;
+					};
+
+					macaddr: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@380000 {
+				reg = <0x380000 0x200000>;
+				label = "fip";
+			};
+
+			partition@580000 {
+				reg = <0x580000 0x4000000>;
+				label = "ubi";
+			};
+		};
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	nvmem-cells = <&eeprom>;
+	nvmem-cell-names = "eeprom";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
index 779dc6782bb1..047a8388811e 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
@@ -9,21 +9,17 @@
 
 / {
 	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-
-	fragment@0 {
-		target-path = "/soc/mmc@11230000";
-		__overlay__ {
-			bus-width = <8>;
-			max-frequency = <200000000>;
-			cap-mmc-highspeed;
-			mmc-hs200-1_8v;
-			mmc-hs400-1_8v;
-			hs400-ds-delay = <0x14014>;
-			non-removable;
-			no-sd;
-			no-sdio;
-			status = "okay";
-		};
-	};
 };
 
+&{/soc/mmc@11230000} {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	hs400-ds-delay = <0x14014>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts
new file mode 100644
index 000000000000..e2a2fea7adf0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Authors: Frank Wunderlich <frank-w@public-files.de>
+ *          Eric Woudstra <ericwouds@gmail.com>
+ *          Tianling Shen <cnsztl@immortalwrt.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	model = "Bananapi BPI-R3 Mini";
+	chassis-type = "embedded";
+	compatible = "bananapi,bpi-r3mini", "mediatek,mt7986a";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dcin: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12vd";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		/*
+		 * The signal is inverted on this board and the PWM driver
+		 * does not support polarity inversion.
+		 */
+		/* cooling level (0, 1, 2) */
+		cooling-levels = <255 96 0>;
+		pwms = <&pwm 0 10000>;
+	};
+
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1.8vd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&dcin>;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3vd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&dcin>;
+	};
+
+	usb_vbus: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&pio 20 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+	};
+
+	en8811_a: regulator-phy1 {
+		compatible = "regulator-fixed";
+		regulator-name = "phy1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 16 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	en8811_b: regulator-phy2 {
+		compatible = "regulator-fixed";
+		regulator-name = "phy2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 17 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset-key {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* active: set fan to cooling level 2 */
+			cooling-device = <&fan 2 2>;
+			trip = <&cpu_trip_active_high>;
+		};
+
+		map1 {
+			/* active: set fan to cooling level 1 */
+			cooling-device = <&fan 1 1>;
+			trip = <&cpu_trip_active_med>;
+		};
+
+		map2 {
+			/* active: set fan to cooling level 0 */
+			cooling-device = <&fan 0 0>;
+			trip = <&cpu_trip_active_low>;
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy0>;
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy1>;
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+};
+
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "okay";
+
+	/* MAC Address EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+
+		address-width = <8>;
+		pagesize = <8>;
+		size = <256>;
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@14 {
+		reg = <14>;
+		interrupts-extended = <&pio 48 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <20000>;
+		phy-mode = "2500base-x";
+		full-duplex;
+		pause;
+		airoha,pnswap-rx;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 { /* en8811_a_gpio5 */
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				function-enumerator = <1>;
+				default-state = "keep";
+			};
+			led@1 { /* en8811_a_gpio4 */
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				function-enumerator = <2>;
+				default-state = "keep";
+			};
+		};
+	};
+
+	phy1: ethernet-phy@15 {
+		reg = <15>;
+		interrupts-extended = <&pio 46 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <20000>;
+		phy-mode = "2500base-x";
+		full-duplex;
+		pause;
+		airoha,pnswap-rx;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 { /* en8811_b_gpio5 */
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_WAN;
+				function-enumerator = <1>;
+				default-state = "keep";
+			};
+			led@1 { /* en8811_b_gpio4 */
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				function-enumerator = <2>;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pio {
+	i2c_pins: i2c-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c";
+		};
+	};
+
+	mmc0_pins_default: mmc0-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm0";
+		};
+	};
+
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	usb_ngff_pins: usb-ngff-pins {
+		ngff-gnss-off-conf {
+			pins = "GPIO_6";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-pe-rst-conf {
+			pins = "GPIO_7";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-wwan-off-conf {
+			pins = "GPIO_8";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-pwr-off-conf {
+			pins = "GPIO_9";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-rst-conf {
+			pins = "GPIO_10";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-coex-conf {
+			pins = "SPI1_CS";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_led_pins: wf-led-pins {
+		mux {
+			function = "led";
+			groups = "wifi_led";
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+
+		spi-max-frequency = <20000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&ssusb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_ngff_pins>;
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&usb_vbus>;
+	status = "okay";
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>;
+
+	led {
+		led-active-low;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
index 543c13385d6e..24398f8a7da4 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
@@ -9,46 +9,44 @@
 
 / {
 	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+};
+
+&{/soc/spi@1100a000} {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	spi_nand: flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
 
-	fragment@0 {
-		target-path = "/soc/spi@1100a000";
-		__overlay__ {
+		partitions {
+			compatible = "fixed-partitions";
 			#address-cells = <1>;
-			#size-cells = <0>;
-			spi_nand: spi_nand@0 {
-				compatible = "spi-nand";
-				reg = <0>;
-				spi-max-frequency = <10000000>;
-				spi-tx-buswidth = <4>;
-				spi-rx-buswidth = <4>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "bl2";
-						reg = <0x0 0x100000>;
-						read-only;
-					};
-
-					partition@100000 {
-						label = "reserved";
-						reg = <0x100000 0x280000>;
-					};
-
-					partition@380000 {
-						label = "fip";
-						reg = <0x380000 0x200000>;
-						read-only;
-					};
-
-					partition@580000 {
-						label = "ubi";
-						reg = <0x580000 0x7a80000>;
-					};
-				};
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "reserved";
+				reg = <0x100000 0x280000>;
+			};
+
+			partition@380000 {
+				label = "fip";
+				reg = <0x380000 0x200000>;
+				read-only;
+			};
+
+			partition@580000 {
+				label = "ubi";
+				reg = <0x580000 0x7a80000>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
index e48881be4ed6..6a0d529b54ac 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
@@ -9,54 +9,52 @@
 
 / {
 	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+};
+
+&{/soc/spi@1100a000} {
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-	fragment@0 {
-		target-path = "/soc/spi@1100a000";
-		__overlay__ {
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
 			#address-cells = <1>;
-			#size-cells = <0>;
-			flash@0 {
-				compatible = "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <10000000>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "bl2";
-						reg = <0x0 0x40000>;
-						read-only;
-					};
-
-					partition@40000 {
-						label = "u-boot-env";
-						reg = <0x40000 0x40000>;
-					};
-
-					partition@80000 {
-						label = "reserved2";
-						reg = <0x80000 0x80000>;
-					};
-
-					partition@100000 {
-						label = "fip";
-						reg = <0x100000 0x80000>;
-						read-only;
-					};
-
-					partition@180000 {
-						label = "recovery";
-						reg = <0x180000 0xa80000>;
-					};
-
-					partition@c00000 {
-						label = "fit";
-						reg = <0xc00000 0x1400000>;
-					};
-				};
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x40000 0x40000>;
+			};
+
+			partition@80000 {
+				label = "reserved2";
+				reg = <0x80000 0x80000>;
+			};
+
+			partition@100000 {
+				label = "fip";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "recovery";
+				reg = <0x180000 0xa80000>;
+			};
+
+			partition@c00000 {
+				label = "fit";
+				reg = <0xc00000 0x1400000>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso
new file mode 100644
index 000000000000..f7dd52981977
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	reg_sata12v: regulator-sata12v {
+		compatible = "regulator-fixed";
+		regulator-name = "sata12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pio 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_sata5v: regulator-sata5v {
+		compatible = "regulator-fixed";
+		regulator-name = "sata5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata12v>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
index f623bce075ce..d9e01967acc4 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
@@ -9,15 +9,11 @@
 
 / {
 	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-
-	fragment@0 {
-		target-path = "/soc/mmc@11230000";
-		__overlay__ {
-			bus-width = <4>;
-			max-frequency = <52000000>;
-			cap-sd-highspeed;
-			status = "okay";
-		};
-	};
 };
 
+&{/soc/mmc@11230000} {
+	bus-width = <4>;
+	max-frequency = <52000000>;
+	cap-sd-highspeed;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index b876e501216b..e7654dc9a1c9 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -43,7 +43,7 @@
 		#cooling-cells = <2>;
 		/* cooling level (0, 1, 2) - pwm inverted */
 		cooling-levels = <255 96 0>;
-		pwms = <&pwm 0 10000 0>;
+		pwms = <&pwm 0 10000>;
 		status = "okay";
 	};
 
@@ -64,23 +64,19 @@
 	};
 
 	/* i2c of the left SFP cage (wan) */
-	i2c_sfp1: i2c-gpio-0 {
+	i2c_sfp1: i2c-0 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 	};
 
 	/* i2c of the right SFP cage (lan) */
-	i2c_sfp2: i2c-gpio-1 {
+	i2c_sfp2: i2c-1 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 	};
 
 	leds {
@@ -146,19 +142,19 @@
 
 &cpu_thermal {
 	cooling-maps {
-		cpu-active-high {
+		map-cpu-active-high {
 			/* active: set fan to cooling level 2 */
 			cooling-device = <&fan 2 2>;
 			trip = <&cpu_trip_active_high>;
 		};
 
-		cpu-active-med {
+		map-cpu-active-med {
 			/* active: set fan to cooling level 1 */
 			cooling-device = <&fan 1 1>;
 			trip = <&cpu_trip_active_med>;
 		};
 
-		cpu-active-low {
+		map-cpu-active-low {
 			/* active: set fan to cooling level 0 */
 			cooling-device = <&fan 0 0>;
 			trip = <&cpu_trip_active_low>;
@@ -204,9 +200,9 @@
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		interrupt-controller;
-		#interrupt-cells = <1>;
 		interrupt-parent = <&pio>;
 		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <1>;
 		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 3ef371ca254e..5d8e3d3f6c20 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -65,6 +65,18 @@
 		};
 	};
 
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
 	mdio: mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -237,12 +249,13 @@
 	pinctrl-0 = <&spi_flash_pins>;
 	cs-gpios = <0>, <0>;
 	status = "okay";
-	spi_nand: spi_nand@0 {
+
+	spi_nand: flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-		spi-tx-buswidth = <4>;
-		spi-rx-buswidth = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 	};
 };
 
@@ -287,6 +300,18 @@
 			label = "lan4";
 		};
 
+		port@5 {
+			reg = <5>;
+			ethernet = <&gmac1>;
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+
 		port@6 {
 			reg = <6>;
 			label = "cpu";
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index fc751e049953..a8972330a7b8 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -16,49 +16,49 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	clk40m: oscillator-40m {
-		compatible = "fixed-clock";
-		clock-frequency = <40000000>;
-		#clock-cells = <0>;
-		clock-output-names = "clkxtal";
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu0: cpu@0 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
-			device_type = "cpu";
-			enable-method = "psci";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 	};
 
+	clk40m: oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+		clock-output-names = "clkxtal";
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -121,38 +121,30 @@
 
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-	};
-
 	soc {
-		#address-cells = <2>;
-		#size-cells = <2>;
 		compatible = "simple-bus";
 		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
 
 		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
 			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
 			      <0 0x0c080000 0 0x80000>,  /* GICR */
 			      <0 0x0c400000 0 0x2000>,   /* GICC */
 			      <0 0x0c410000 0 0x1000>,   /* GICH */
 			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupt-parent = <&gic>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
 		};
 
 		infracfg: infracfg@10001000 {
 			compatible = "mediatek,mt7986-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		wed_pcie: wed-pcie@10003000 {
@@ -202,6 +194,19 @@
 			#interrupt-cells = <2>;
 		};
 
+		pwm: pwm@10048000 {
+			compatible = "mediatek,mt7986-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&infracfg CLK_INFRA_PWM_STA>,
+				 <&infracfg CLK_INFRA_PWM1_CK>,
+				 <&infracfg CLK_INFRA_PWM2_CK>;
+			clock-names = "top", "main", "pwm1", "pwm2";
+			status = "disabled";
+		};
+
 		sgmiisys0: syscon@10060000 {
 			compatible = "mediatek,mt7986-sgmiisys_0",
 				     "syscon";
@@ -234,26 +239,11 @@
 				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ring0", "ring1", "ring2", "ring3";
 			clocks = <&infracfg CLK_INFRA_EIP97_CK>;
-			clock-names = "infra_eip97_ck";
 			assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>;
 			status = "disabled";
 		};
 
-		pwm: pwm@10048000 {
-			compatible = "mediatek,mt7986-pwm";
-			reg = <0 0x10048000 0 0x1000>;
-			#clock-cells = <1>;
-			#pwm-cells = <2>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&topckgen CLK_TOP_PWM_SEL>,
-				 <&infracfg CLK_INFRA_PWM_STA>,
-				 <&infracfg CLK_INFRA_PWM1_CK>,
-				 <&infracfg CLK_INFRA_PWM2_CK>;
-			clock-names = "top", "main", "pwm1", "pwm2";
-			status = "disabled";
-		};
-
 		uart0: serial@11002000 {
 			compatible = "mediatek,mt7986-uart",
 				     "mediatek,mt6577-uart";
@@ -311,9 +301,9 @@
 
 		spi0: spi@1100a000 {
 			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100a000 0 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0 0x1100a000 0 0x100>;
 			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&topckgen CLK_TOP_MPLL_D2>,
 				 <&topckgen CLK_TOP_SPI_SEL>,
@@ -325,9 +315,9 @@
 
 		spi1: spi@1100b000 {
 			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100b000 0 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0 0x1100b000 0 0x100>;
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&topckgen CLK_TOP_MPLL_D2>,
 				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
@@ -337,6 +327,20 @@
 			status = "disabled";
 		};
 
+		thermal: thermal@1100c800 {
+			compatible = "mediatek,mt7986-thermal";
+			reg = <0 0x1100c800 0 0x800>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_THERM_CK>,
+				 <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "therm", "auxadc";
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+			#thermal-sensor-cells = <1>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+		};
+
 		auxadc: adc@1100d000 {
 			compatible = "mediatek,mt7986-auxadc";
 			reg = <0 0x1100d000 0 0x1000>;
@@ -388,39 +392,23 @@
 			status = "disabled";
 		};
 
-		thermal: thermal@1100c800 {
-			#thermal-sensor-cells = <1>;
-			compatible = "mediatek,mt7986-thermal";
-			reg = <0 0x1100c800 0 0x800>;
-			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&infracfg CLK_INFRA_THERM_CK>,
-				 <&infracfg CLK_INFRA_ADC_26M_CK>,
-				 <&infracfg CLK_INFRA_ADC_FRC_CK>;
-			clock-names = "therm", "auxadc", "adc_32k";
-			mediatek,auxadc = <&auxadc>;
-			mediatek,apmixedsys = <&apmixedsys>;
-			nvmem-cells = <&thermal_calibration>;
-			nvmem-cell-names = "calibration-data";
-		};
-
 		pcie: pcie@11280000 {
 			compatible = "mediatek,mt7986-pcie",
 				     "mediatek,mt8192-pcie";
+			reg = <0x00 0x11280000 0x00 0x4000>;
+			reg-names = "pcie-mac";
+			ranges = <0x82000000 0x00 0x20000000 0x00
+				  0x20000000 0x00 0x10000000>;
 			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			reg = <0x00 0x11280000 0x00 0x4000>;
-			reg-names = "pcie-mac";
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			bus-range = <0x00 0xff>;
-			ranges = <0x82000000 0x00 0x20000000 0x00
-				  0x20000000 0x00 0x10000000>;
 			clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
 				 <&infracfg CLK_INFRA_IPCIE_CK>,
 				 <&infracfg CLK_INFRA_IPCIER_CK>,
 				 <&infracfg CLK_INFRA_IPCIEB_CK>;
 			clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
-			status = "disabled";
 
 			phys = <&pcie_port PHY_TYPE_PCIE>;
 			phy-names = "pcie-phy";
@@ -431,6 +419,8 @@
 					<0 0 0 2 &pcie_intc 1>,
 					<0 0 0 3 &pcie_intc 2>,
 					<0 0 0 4 &pcie_intc 3>;
+			status = "disabled";
+
 			pcie_intc: interrupt-controller {
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
@@ -438,16 +428,16 @@
 			};
 		};
 
-		pcie_phy: t-phy {
+		pcie_phy: t-phy@11c00000 {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			ranges = <0 0 0x11c00000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			status = "disabled";
 
-			pcie_port: pcie-phy@11c00000 {
-				reg = <0 0x11c00000 0 0x20000>;
+			pcie_port: pcie-phy@0 {
+				reg = <0 0x20000>;
 				clocks = <&clk40m>;
 				clock-names = "ref";
 				#phy-cells = <1>;
@@ -468,9 +458,9 @@
 		usb_phy: t-phy@11e10000 {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
+			ranges = <0 0 0x11e10000 0x1700>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0 0 0x11e10000 0x1700>;
 			status = "disabled";
 
 			u2port0: usb-phy@0 {
@@ -498,8 +488,6 @@
 		};
 
 		ethsys: syscon@15000000 {
-			 #address-cells = <1>;
-			 #size-cells = <1>;
 			 compatible = "mediatek,mt7986-ethsys",
 				      "syscon";
 			 reg = <0 0x15000000 0 0x1000>;
@@ -533,27 +521,19 @@
 			mediatek,wo-ccif = <&wo_ccif1>;
 		};
 
-		wo_ccif0: syscon@151a5000 {
-			compatible = "mediatek,mt7986-wo-ccif", "syscon";
-			reg = <0 0x151a5000 0 0x1000>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		wo_ccif1: syscon@151ad000 {
-			compatible = "mediatek,mt7986-wo-ccif", "syscon";
-			reg = <0 0x151ad000 0 0x1000>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
 		eth: ethernet@15100000 {
 			compatible = "mediatek,mt7986-eth";
-			reg = <0 0x15100000 0 0x80000>;
+			reg = <0 0x15100000 0 0x40000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "fe0", "fe1", "fe2", "fe3", "pdma0",
+					  "pdma1", "pdma2", "pdma3";
 			clocks = <&ethsys CLK_ETH_FE_EN>,
 				 <&ethsys CLK_ETH_GP2_EN>,
 				 <&ethsys CLK_ETH_GP1_EN>,
@@ -579,26 +559,49 @@
 					  <&topckgen CLK_TOP_SGM_325M_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
 						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			sram = <&eth_sram>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			mediatek,ethsys = <&ethsys>;
 			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
 			mediatek,wed-pcie = <&wed_pcie>;
 			mediatek,wed = <&wed0>, <&wed1>;
-			#reset-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
+		/*15100000+0x40000*/
+		eth_sram: sram@15140000 {
+			compatible = "mmio-sram";
+			reg = <0 0x15140000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x15140000 0 0x40000>;
+		};
+
+		wo_ccif0: syscon@151a5000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151a5000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wo_ccif1: syscon@151ad000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151ad000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		wifi: wifi@18000000 {
 			compatible = "mediatek,mt7986-wmac";
+			reg = <0 0x18000000 0 0x1000000>,
+			      <0 0x10003000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>;
 			resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
 			reset-names = "consys";
 			clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
 				 <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
 			clock-names = "mcu", "ap2conn";
-			reg = <0 0x18000000 0 0x1000000>,
-			      <0 0x10003000 0 0x1000>,
-			      <0 0x11d10000 0 0x1000>;
 			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
@@ -646,4 +649,13 @@
 			};
 		};
 	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index dde190442e38..58f77d932429 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -45,6 +45,18 @@
 		};
 	};
 
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
 	mdio: mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -83,6 +95,18 @@
 					label = "lan4";
 				};
 
+				port@5 {
+					reg = <5>;
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";
@@ -152,12 +176,13 @@
 	pinctrl-0 = <&spi_flash_pins>;
 	cs-gpios = <0>, <0>;
 	status = "okay";
-	spi_nand: spi_nand@0 {
+
+	spi_nand: flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-		spi-tx-buswidth = <4>;
-		spi-rx-buswidth = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
new file mode 100644
index 000000000000..6f0c81e3fd94
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7988a-bananapi-bpi-r4.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-r4-2g5", "bananapi,bpi-r4", "mediatek,mt7988a";
+	model = "Banana Pi BPI-R4 (1x SFP+, 1x 2.5GbE)";
+	chassis-type = "embedded";
+};
+
+&gmac1 {
+	phy = <&int_2p5g_phy>;
+	phy-mode = "internal";
+	status = "okay";
+};
+
+&int_2p5g_phy {
+	pinctrl-0 = <&i2p5gbe_led0_pins>;
+	pinctrl-names = "i2p5gbe-led";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso
new file mode 100644
index 000000000000..3e320b2f83d5
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
+};
+
+&{/soc/mmc@11230000} {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_emmc_51>;
+	pinctrl-1 = <&mmc0_pins_emmc_51>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	hs400-ds-delay = <0x12814>;
+	vqmmc-supply = <&reg_1p8v>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso
new file mode 100644
index 000000000000..663c6345dd31
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
+};
+
+&{/soc/mmc@11230000} {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_sdcard>;
+	pinctrl-1 = <&mmc0_pins_sdcard>;
+	cd-gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	max-frequency = <52000000>;
+	cap-sd-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	no-mmc;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
new file mode 100644
index 000000000000..4b3796ba82e3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7988a-bananapi-bpi-r4.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
+	model = "Banana Pi BPI-R4 (2x SFP+)";
+	chassis-type = "embedded";
+
+	/* SFP2 cage (LAN) */
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		maximum-power-milliwatt = <3000>;
+
+		los-gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 83 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&pio 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gmac1 {
+	managed = "in-band-status";
+	phy-mode = "usxgmii";
+	sfp = <&sfp2>;
+};
+
+&pca9545 {
+	i2c_sfp2: i2c@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
new file mode 100644
index 000000000000..0ff69dae45d3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7988a.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		/* cooling level (0, 1, 2, 3) : (0% duty, 30% duty, 50% duty, 100% duty) */
+		cooling-levels = <0 80 128 255>;
+		#cooling-cells = <2>;
+		pwms = <&pwm 0 50000>;
+		status = "okay";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led_green: led-green {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 79 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led_blue: led-blue {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 63 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	/* SFP1 cage (WAN) */
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		maximum-power-milliwatt = <3000>;
+
+		los-gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 82 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&pio 21 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 70 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cci {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu0 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu1 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu2 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu3 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_trip_hot: hot {
+			temperature = <120000>;
+			hysteresis = <2000>;
+			type = "hot";
+		};
+
+		cpu_trip_active_high: active-high {
+			temperature = <115000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_med: active-med {
+			temperature = <85000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_low: active-low {
+			temperature = <40000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map-cpu-active-high {
+			/* active: set fan to cooling level 2 */
+			cooling-device = <&fan 3 3>;
+			trip = <&cpu_trip_active_high>;
+		};
+
+		map-cpu-active-med {
+			/* active: set fan to cooling level 1 */
+			cooling-device = <&fan 2 2>;
+			trip = <&cpu_trip_active_med>;
+		};
+
+		map-cpu-active-low {
+			/* active: set fan to cooling level 0 */
+			cooling-device = <&fan 1 1>;
+			trip = <&cpu_trip_active_low>;
+		};
+	};
+};
+
+&gmac2 {
+	managed = "in-band-status";
+	phy-mode = "usxgmii";
+	sfp = <&sfp1>;
+};
+
+&gsw_phy0 {
+	pinctrl-0 = <&gbe0_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy0_led0 {
+	function = LED_FUNCTION_WAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port0 {
+	label = "wan";
+};
+
+&gsw_phy1 {
+	pinctrl-0 = <&gbe1_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy1_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port1 {
+	label = "lan1";
+};
+
+&gsw_phy2 {
+	pinctrl-0 = <&gbe2_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy2_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port2 {
+	label = "lan2";
+};
+
+&gsw_phy3 {
+	pinctrl-0 = <&gbe3_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy3_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port3 {
+	label = "lan3";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	rt5190a_64: rt5190a@64 {
+		compatible = "richtek,rt5190a";
+		reg = <0x64>;
+		vin2-supply = <&rt5190_buck1>;
+		vin3-supply = <&rt5190_buck1>;
+		vin4-supply = <&rt5190_buck1>;
+
+		regulators {
+			rt5190_buck1: buck1 {
+				regulator-name = "rt5190a-buck1";
+				regulator-min-microvolt = <5090000>;
+				regulator-max-microvolt = <5090000>;
+				regulator-allowed-modes =
+				<RT5190A_OPMODE_AUTO>, <RT5190A_OPMODE_FPWM>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			buck2 {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			rt5190_buck3: buck3 {
+				regulator-name = "vproc";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+			};
+			buck4 {
+				regulator-name = "rt5190a-buck4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes =
+				<RT5190A_OPMODE_AUTO>, <RT5190A_OPMODE_FPWM>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			ldo {
+				regulator-name = "rt5190a-ldo";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_1_pins>;
+	status = "okay";
+
+	pca9545: i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			pcf8563: rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+				#clock-cells = <0>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+				size = <256>;
+			};
+
+		};
+
+		i2c_sfp1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+/* mPCIe SIM2 */
+&pcie0 {
+	status = "okay";
+};
+
+/* mPCIe SIM3 */
+&pcie1 {
+	status = "okay";
+};
+
+/* M.2 key-B SIM1 */
+&pcie2 {
+	status = "okay";
+};
+
+/* M.2 key-M SSD */
+&pcie3 {
+	status = "okay";
+};
+
+&pio {
+	i2c0_pins: i2c0-g0-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c0_1";
+		};
+	};
+
+	i2c1_pins: i2c1-g0-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c1_0";
+		};
+	};
+
+	i2c2_1_pins: i2c2-g1-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c2_1";
+		};
+	};
+
+	gbe0_led0_pins: gbe0-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe0_led0";
+		};
+	};
+
+	gbe1_led0_pins: gbe1-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe1_led0";
+		};
+	};
+
+	gbe2_led0_pins: gbe2-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe2_led0";
+		};
+	};
+
+	gbe3_led0_pins: gbe3-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe3_led0";
+		};
+	};
+
+	i2p5gbe_led0_pins: 2p5gbe-led0-pins {
+		mux {
+			function = "led";
+			groups = "2p5gbe_led0";
+		};
+	};
+
+	mmc0_pins_emmc_45: mmc0-emmc-45-pins {
+		mux {
+			function = "flash";
+			groups = "emmc_45";
+		};
+	};
+
+	mmc0_pins_emmc_51: mmc0-emmc-51-pins {
+		mux {
+			function = "flash";
+			groups = "emmc_51";
+		};
+	};
+
+	mmc0_pins_sdcard: mmc0-sdcard-pins {
+		mux {
+			function = "flash";
+			groups = "sdcard";
+		};
+	};
+
+	spi0_flash_pins: spi0-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_flash_pins>;
+	status = "okay";
+
+	spi_nand: flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&spi_nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bl2";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+	};
+};
+
+&ssusb1 {
+	status = "okay";
+};
+
+&tphy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&xsphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
new file mode 100644
index 000000000000..366203a72d6d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -0,0 +1,1034 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+#include <dt-bindings/clock/mediatek,mt7988-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mt65xx.h>
+#include <dt-bindings/reset/mediatek,mt7988-resets.h>
+
+/ {
+	compatible = "mediatek,mt7988a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cci: cci {
+		compatible = "mediatek,mt7988-cci", "mediatek,mt8183-cci";
+		clocks = <&mcusys CLK_MCU_BUS_DIV_SEL>,
+			 <&topckgen CLK_TOP_XTAL>;
+		clock-names = "cci", "intermediate";
+		operating-points-v2 = <&cci_opp>;
+	};
+
+	cci_opp: opp-table-cci {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-660000000 {
+			opp-hz = /bits/ 64 <660000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-1080000000 {
+			opp-hz = /bits/ 64 <1080000000>;
+			opp-microvolt = <900000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a73";
+			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
+				 <&topckgen CLK_TOP_XTAL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a73";
+			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
+				 <&topckgen CLK_TOP_XTAL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a73";
+			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
+			clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
+				 <&topckgen CLK_TOP_XTAL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a73";
+			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
+			clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
+				 <&topckgen CLK_TOP_XTAL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
+		};
+
+		cluster0_opp: opp-table-0 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = <850000>;
+			};
+			opp-1100000000 {
+				opp-hz = /bits/ 64 <1100000000>;
+				opp-microvolt = <850000>;
+			};
+			opp-1500000000 {
+				opp-hz = /bits/ 64 <1500000000>;
+				opp-microvolt = <850000>;
+			};
+			opp-1800000000 {
+				opp-hz = /bits/ 64 <1800000000>;
+				opp-microvolt = <900000>;
+			};
+		};
+	};
+
+	oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+		clock-output-names = "clkxtal";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 320 KiB reserved for ARM Trusted Firmware (BL31 and BL32) */
+		secmon@43000000 {
+			reg = <0 0x43000000 0 0x50000>;
+			no-map;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c080000 0 0x200000>, /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		infracfg: clock-controller@10001000 {
+			compatible = "mediatek,mt7988-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		topckgen: clock-controller@1001b000 {
+			compatible = "mediatek,mt7988-topckgen", "syscon";
+			reg = <0 0x1001b000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7988-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: clock-controller@1001e000 {
+			compatible = "mediatek,mt7988-apmixedsys";
+			reg = <0 0x1001e000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7988-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c10000 0 0x1000>,
+			      <0 0x11d00000 0 0x1000>,
+			      <0 0x11d20000 0 0x1000>,
+			      <0 0x11e00000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio", "iocfg_tr",
+				    "iocfg_br", "iocfg_rb",
+				    "iocfg_lb", "iocfg_tl", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 84>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+
+			pcie0_pins: pcie0-pins {
+				mux {
+					function = "pcie";
+					groups = "pcie_2l_0_pereset", "pcie_clk_req_n0_0",
+						 "pcie_wake_n0_0";
+				};
+			};
+
+			pcie1_pins: pcie1-pins {
+				mux {
+					function = "pcie";
+					groups = "pcie_2l_1_pereset", "pcie_clk_req_n1",
+						 "pcie_wake_n1_0";
+				};
+			};
+
+			pcie2_pins: pcie2-pins {
+				mux {
+					function = "pcie";
+					groups = "pcie_1l_0_pereset", "pcie_clk_req_n2_0",
+						 "pcie_wake_n2_0";
+				};
+			};
+
+			pcie3_pins: pcie3-pins {
+				mux {
+					function = "pcie";
+					groups = "pcie_1l_1_pereset", "pcie_clk_req_n3",
+						 "pcie_wake_n3_0";
+				};
+			};
+
+			spi1_pins: spi1-pins {
+				mux {
+					function = "spi";
+					groups = "spi1";
+				};
+			};
+
+			uart0_pins: uart0-pins {
+				mux {
+					function = "uart";
+					groups =  "uart0";
+				};
+			};
+		};
+
+		pwm: pwm@10048000 {
+			compatible = "mediatek,mt7988-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_66M_PWM_BCK>,
+				 <&infracfg CLK_INFRA_66M_PWM_HCK>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK1>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK2>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK3>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK4>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK5>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK6>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK7>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK8>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4", "pwm5", "pwm6", "pwm7", "pwm8";
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		mcusys: mcusys@100e0000 {
+			compatible = "mediatek,mt7988-mcusys", "syscon";
+			reg = <0 0x100e0000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		serial0: serial@11000000 {
+			compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11000000 0 0x100>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&infracfg CLK_INFRA_52M_UART0_CK>;
+			clock-names = "baud", "bus";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+			status = "disabled";
+		};
+
+		serial@11000100 {
+			compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11000100 0 0x100>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&infracfg CLK_INFRA_52M_UART1_CK>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		serial@11000200 {
+			compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11000200 0 0x100>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&infracfg CLK_INFRA_52M_UART2_CK>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11003000 {
+			compatible = "mediatek,mt7981-i2c";
+			reg = <0 0x11003000 0 0x1000>,
+			      <0 0x10217080 0 0x80>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
+				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11004000 {
+			compatible = "mediatek,mt7981-i2c";
+			reg = <0 0x11004000 0 0x1000>,
+			      <0 0x10217100 0 0x80>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
+				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11005000 {
+			compatible = "mediatek,mt7981-i2c";
+			reg = <0 0x11005000 0 0x1000>,
+			      <0 0x10217180 0 0x80>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
+				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@11007000 {
+			compatible = "mediatek,mt7988-spi-quad", "mediatek,spi-ipm";
+			reg = <0 0x11007000 0 0x100>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_104M_SPI0>,
+				 <&infracfg CLK_INFRA_66M_SPI0_HCK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk",
+				      "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@11008000 {
+			compatible = "mediatek,mt7988-spi-single", "mediatek,spi-ipm";
+			reg = <0 0x11008000 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
+				 <&infracfg CLK_INFRA_104M_SPI1>,
+				 <&infracfg CLK_INFRA_66M_SPI1_HCK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk",
+				      "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			status = "disabled";
+		};
+
+		spi2: spi@11009000 {
+			compatible = "mediatek,mt7988-spi-quad", "mediatek,spi-ipm";
+			reg = <0 0x11009000 0 0x100>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_104M_SPI2_BCK>,
+				 <&infracfg CLK_INFRA_66M_SPI2_HCK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk",
+				      "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		lvts: lvts@1100a000 {
+			compatible = "mediatek,mt7988-lvts-ap";
+			#thermal-sensor-cells = <1>;
+			reg = <0 0x1100a000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_26M_THERM_SYSTEM>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT7988_INFRA_RST1_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_calibration>;
+			nvmem-cell-names = "lvts-calib-data-1";
+		};
+
+		usb@11190000 {
+			compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11190000 0 0x2e00>,
+			      <0 0x11193e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_USB_SYS>,
+				 <&infracfg CLK_INFRA_USB_REF>,
+				 <&infracfg CLK_INFRA_66M_USB_HCK>,
+				 <&infracfg CLK_INFRA_133M_USB_HCK>,
+				 <&infracfg CLK_INFRA_USB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+			phys = <&xphyu2port0 PHY_TYPE_USB2>,
+			       <&xphyu3port0 PHY_TYPE_USB3>;
+			status = "disabled";
+		};
+
+		ssusb1: usb@11200000 {
+			compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_USB_SYS_CK_P1>,
+				 <&infracfg CLK_INFRA_USB_CK_P1>,
+				 <&infracfg CLK_INFRA_66M_USB_HCK_CK_P1>,
+				 <&infracfg CLK_INFRA_133M_USB_HCK_CK_P1>,
+				 <&infracfg CLK_INFRA_USB_XHCI_CK_P1>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+			phys = <&tphyu2port0 PHY_TYPE_USB2>,
+			       <&tphyu3port0 PHY_TYPE_USB3>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt7988-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11D60000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_MSDC400>,
+				 <&infracfg CLK_INFRA_MSDC2_HCK>,
+				 <&infracfg CLK_INFRA_66M_MSDC_0_HCK>,
+				 <&infracfg CLK_INFRA_133M_MSDC_0_HCK>;
+			assigned-clocks = <&topckgen CLK_TOP_EMMC_250M_SEL>,
+					  <&topckgen CLK_TOP_EMMC_400M_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_NET1PLL_D5_D2>,
+						 <&apmixedsys CLK_APMIXED_MSDCPLL>;
+			clock-names = "source", "hclk", "axi_cg", "ahb_cg";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie2: pcie@11280000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x11280000 0 0x2000>;
+			reg-names = "pcie-mac";
+			linux,pci-domain = <3>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0x00 0x20000000 0x00
+				  0x20000000 0x00 0x00200000>,
+				 <0x82000000 0x00 0x20200000 0x00
+				  0x20200000 0x00 0x07e00000>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P2>,
+				 <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P2>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P2>,
+				 <&infracfg CLK_INFRA_133M_PCIE_CK_P2>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m",
+				      "top_133m";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie2_pins>;
+			status = "disabled";
+
+			phys = <&xphyu3port0 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc2 0>,
+					<0 0 0 2 &pcie_intc2 1>,
+					<0 0 0 3 &pcie_intc2 2>,
+					<0 0 0 4 &pcie_intc2 3>;
+			pcie_intc2: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie3: pcie@11290000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x11290000 0 0x2000>;
+			reg-names = "pcie-mac";
+			linux,pci-domain = <2>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0x00 0x28000000 0x00
+				  0x28000000 0x00 0x00200000>,
+				 <0x82000000 0x00 0x28200000 0x00
+				  0x28200000 0x00 0x07e00000>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P3>,
+				 <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P3>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P3>,
+				 <&infracfg CLK_INFRA_133M_PCIE_CK_P3>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m",
+				      "top_133m";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie3_pins>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc3 0>,
+					<0 0 0 2 &pcie_intc3 1>,
+					<0 0 0 3 &pcie_intc3 2>,
+					<0 0 0 4 &pcie_intc3 3>;
+			pcie_intc3: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie0: pcie@11300000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x11300000 0 0x2000>;
+			reg-names = "pcie-mac";
+			linux,pci-domain = <0>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0x00 0x30000000 0x00
+				  0x30000000 0x00 0x00200000>,
+				 <0x82000000 0x00 0x30200000 0x00
+				  0x30200000 0x00 0x07e00000>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P0>,
+				 <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P0>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P0>,
+				 <&infracfg CLK_INFRA_133M_PCIE_CK_P0>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m",
+				      "top_133m";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie0_pins>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			pcie_intc0: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie1: pcie@11310000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x11310000 0 0x2000>;
+			reg-names = "pcie-mac";
+			linux,pci-domain = <1>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0x00 0x38000000 0x00
+				  0x38000000 0x00 0x00200000>,
+				 <0x82000000 0x00 0x38200000 0x00
+				  0x38200000 0x00 0x07e00000>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P1>,
+				 <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P1>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P1>,
+				 <&infracfg CLK_INFRA_133M_PCIE_CK_P1>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m",
+				      "top_133m";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_pins>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			pcie_intc1: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		tphy: t-phy@11c50000 {
+			compatible = "mediatek,mt7986-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			tphyu2port0: usb-phy@11c50000 {
+				reg = <0 0x11c50000 0 0x700>;
+				clocks = <&infracfg CLK_INFRA_USB_UTMI_CK_P1>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			tphyu3port0: usb-phy@11c50700 {
+				reg = <0 0x11c50700 0 0x900>;
+				clocks = <&infracfg CLK_INFRA_USB_PIPE_CK_P1>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+
+		topmisc: system-controller@11d10084 {
+			compatible = "mediatek,mt7988-topmisc",
+				     "syscon";
+			reg = <0 0x11d10084 0 0xff80>;
+		};
+
+		xsphy: xs-phy@11e10000 {
+			compatible = "mediatek,mt7988-xsphy",
+				     "mediatek,xsphy";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			xphyu2port0: usb-phy@11e10000 {
+				reg = <0 0x11e10000 0 0x400>;
+				clocks = <&infracfg CLK_INFRA_USB_UTMI>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			xphyu3port0: usb-phy@11e13000 {
+				reg = <0 0x11e13400 0 0x500>;
+				clocks = <&infracfg CLK_INFRA_USB_PIPE>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				mediatek,syscon-type = <&topmisc 0x194 0>;
+			};
+		};
+
+		xfi_tphy0: phy@11f20000 {
+			compatible = "mediatek,mt7988-xfi-tphy";
+			reg = <0 0x11f20000 0 0x10000>;
+			clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+				 <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>;
+			clock-names = "xfipll", "topxtal";
+			resets = <&watchdog 14>;
+			mediatek,usxgmii-performance-errata;
+			#phy-cells = <0>;
+		};
+
+		xfi_tphy1: phy@11f30000 {
+			compatible = "mediatek,mt7988-xfi-tphy";
+			reg = <0 0x11f30000 0 0x10000>;
+			clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+				 <&topckgen CLK_TOP_XFI_PHY_1_XTAL_SEL>;
+			clock-names = "xfipll", "topxtal";
+			resets = <&watchdog 15>;
+			#phy-cells = <0>;
+		};
+
+		xfi_pll: clock-controller@11f40000 {
+			compatible = "mediatek,mt7988-xfi-pll";
+			reg = <0 0x11f40000 0 0x1000>;
+			resets = <&watchdog 16>;
+			#clock-cells = <1>;
+		};
+
+		efuse@11f50000 {
+			compatible = "mediatek,mt7988-efuse", "mediatek,efuse";
+			reg = <0 0x11f50000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			lvts_calibration: calib@918 {
+				reg = <0x918 0x28>;
+			};
+
+			phy_calibration_p0: calib@940 {
+				reg = <0x940 0x10>;
+			};
+
+			phy_calibration_p1: calib@954 {
+				reg = <0x954 0x10>;
+			};
+
+			phy_calibration_p2: calib@968 {
+				reg = <0x968 0x10>;
+			};
+
+			phy_calibration_p3: calib@97c {
+				reg = <0x97c 0x10>;
+			};
+		};
+
+		ethsys: clock-controller@15000000 {
+			compatible = "mediatek,mt7988-ethsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		switch: switch@15020000 {
+			compatible = "mediatek,mt7988-switch";
+			reg = <0 0x15020000 0 0x8000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ethwarp MT7988_ETHWARP_RST_SWITCH>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gsw_port0: port@0 {
+					reg = <0>;
+					phy-handle = <&gsw_phy0>;
+					phy-mode = "internal";
+				};
+
+				gsw_port1: port@1 {
+					reg = <1>;
+					phy-handle = <&gsw_phy1>;
+					phy-mode = "internal";
+				};
+
+				gsw_port2: port@2 {
+					reg = <2>;
+					phy-handle = <&gsw_phy2>;
+					phy-mode = "internal";
+				};
+
+				gsw_port3: port@3 {
+					reg = <3>;
+					phy-handle = <&gsw_phy3>;
+					phy-mode = "internal";
+				};
+
+				port@6 {
+					reg = <6>;
+					ethernet = <&gmac0>;
+					phy-mode = "internal";
+
+					fixed-link {
+						speed = <10000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mediatek,pio = <&pio>;
+
+				gsw_phy0: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0>;
+					interrupts = <0>;
+					nvmem-cells = <&phy_calibration_p0>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy0_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy0_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy1: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <1>;
+					interrupts = <1>;
+					nvmem-cells = <&phy_calibration_p1>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy1_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy1_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy2: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <2>;
+					interrupts = <2>;
+					nvmem-cells = <&phy_calibration_p2>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy2_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy2_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy3: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <3>;
+					interrupts = <3>;
+					nvmem-cells = <&phy_calibration_p3>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy3_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy3_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+			};
+		};
+
+		ethwarp: clock-controller@15031000 {
+			compatible = "mediatek,mt7988-ethwarp";
+			reg = <0 0x15031000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		eth: ethernet@15100000 {
+			compatible = "mediatek,mt7988-eth";
+			reg = <0 0x15100000 0 0x40000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "fe0", "fe1", "fe2", "fe3", "pdma0",
+					  "pdma1", "pdma2", "pdma3";
+			clocks = <&ethsys CLK_ETHDMA_CRYPT0_EN>,
+				 <&ethsys CLK_ETHDMA_FE_EN>,
+				 <&ethsys CLK_ETHDMA_GP2_EN>,
+				 <&ethsys CLK_ETHDMA_GP1_EN>,
+				 <&ethsys CLK_ETHDMA_GP3_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU2_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU1_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU0_EN>,
+				 <&ethsys CLK_ETHDMA_ESW_EN>,
+				 <&topckgen CLK_TOP_ETH_GMII_SEL>,
+				 <&topckgen CLK_TOP_ETH_REFCK_50M_SEL>,
+				 <&topckgen CLK_TOP_ETH_SYS_200M_SEL>,
+				 <&topckgen CLK_TOP_ETH_SYS_SEL>,
+				 <&topckgen CLK_TOP_ETH_XGMII_SEL>,
+				 <&topckgen CLK_TOP_ETH_MII_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_500M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_PAO_2X_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_SYNC_250M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_PPEFB_250M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_WARP_SEL>,
+				 <&ethsys CLK_ETHDMA_XGP1_EN>,
+				 <&ethsys CLK_ETHDMA_XGP2_EN>,
+				 <&ethsys CLK_ETHDMA_XGP3_EN>;
+			clock-names = "crypto", "fe", "gp2", "gp1", "gp3",
+				      "ethwarp_wocpu2", "ethwarp_wocpu1",
+				      "ethwarp_wocpu0", "esw", "top_eth_gmii_sel",
+				      "top_eth_refck_50m_sel", "top_eth_sys_200m_sel",
+				      "top_eth_sys_sel", "top_eth_xgmii_sel",
+				      "top_eth_mii_sel", "top_netsys_sel",
+				      "top_netsys_500m_sel", "top_netsys_pao_2x_sel",
+				      "top_netsys_sync_250m_sel",
+				      "top_netsys_ppefb_250m_sel",
+				      "top_netsys_warp_sel","xgp1", "xgp2", "xgp3";
+			assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+					  <&topckgen CLK_TOP_NETSYS_GSW_SEL>,
+					  <&topckgen CLK_TOP_USXGMII_SBUS_0_SEL>,
+					  <&topckgen CLK_TOP_USXGMII_SBUS_1_SEL>,
+					  <&topckgen CLK_TOP_SGM_0_SEL>,
+					  <&topckgen CLK_TOP_SGM_1_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+						 <&topckgen CLK_TOP_NET1PLL_D4>,
+						 <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+						 <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			sram = <&eth_sram>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mediatek,ethsys = <&ethsys>;
+			mediatek,infracfg = <&topmisc>;
+
+			gmac0: mac@0 {
+				compatible = "mediatek,eth-mac";
+				reg = <0>;
+				phy-mode = "internal";
+
+				/* Connected to internal switch */
+				fixed-link {
+					speed = <10000>;
+					full-duplex;
+					pause;
+				};
+			};
+
+			gmac1: mac@1 {
+				compatible = "mediatek,eth-mac";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			gmac2: mac@2 {
+				compatible = "mediatek,eth-mac";
+				reg = <2>;
+				status = "disabled";
+			};
+
+			mdio_bus: mdio-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* internal 2.5G PHY */
+				int_2p5g_phy: ethernet-phy@15 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <15>;
+				};
+			};
+		};
+
+		eth_sram: sram@15400000 {
+			compatible = "mmio-sram";
+			reg = <0 0x15400000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x15400000 0 0x200000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+			thermal-sensors = <&lvts 0>;
+			trips {
+				cpu_trip_crit: crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
index 256f245ac01d..1c9fc791bdfc 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
@@ -14,7 +14,7 @@
 
 &cpu_thermal {
 	trips {
-		cpu_crit: cpu_crit0 {
+		cpu_crit: cpu-crit0 {
 			temperature = <100000>;
 			type = "critical";
 		};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
index bdcd35cecad9..dfc5c2f0ddef 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
@@ -13,8 +13,8 @@
 	touchscreen2: touchscreen@34 {
 		compatible = "melfas,mip4_ts";
 		reg = <0x34>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
+		status = "fail-needs-probe";
 	};
 
 	/*
@@ -26,8 +26,18 @@
 		compatible = "hid-over-i2c";
 		reg = <0x20>;
 		hid-descr-addr = <0x0020>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
+		status = "fail-needs-probe";
+	};
+
+	/* Lenovo Ideapad C330 uses G2Touch touchscreen as a 2nd source touchscreen */
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+		hid-descr-addr = <0x0001>;
 		interrupt-parent = <&pio>;
 		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		status = "fail-needs-probe";
 	};
 };
 
@@ -39,11 +49,21 @@
 	 */
 	trackpad2: trackpad@2c {
 		compatible = "hid-over-i2c";
-		interrupt-parent = <&pio>;
-		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_irq>;
 		reg = <0x2c>;
 		hid-descr-addr = <0x0020>;
+		/*
+		 * The trackpad needs a post-power-on delay of 100ms,
+		 * but at time of writing, the power supply for it on
+		 * this board is always on. The delay is therefore not
+		 * added to avoid impacting the readiness of the
+		 * trackpad.
+		 */
+		vdd-supply = <&mt6397_vgp6_reg>;
 		wakeup-source;
+		status = "fail-needs-probe";
 	};
 };
 
@@ -68,3 +88,11 @@
 		};
 	};
 };
+
+&touchscreen {
+	status = "fail-needs-probe";
+};
+
+&trackpad {
+	status = "fail-needs-probe";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index 111495622cac..0d995b342d46 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -245,8 +245,7 @@
 		reg = <0x1a>;
 		avdd-supply = <&mt6397_vgp1_reg>;
 		cpvdd-supply = <&mt6397_vcama_reg>;
-		interrupt-parent = <&pio>;
-		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_BOTH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&rt5650_irq>;
 		#sound-dai-cells = <1>;
@@ -308,8 +307,7 @@
 	da9211: da9211@68 {
 		compatible = "dlg,da9211";
 		reg = <0x68>;
-		interrupt-parent = <&pio>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
 
 		regulators {
 			da9211_vcpu_reg: BUCKA {
@@ -353,21 +351,19 @@
 	touchscreen: touchscreen@10 {
 		compatible = "elan,ekth3500";
 		reg = <0x10>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
 &i2c4 {
 	clock-frequency = <400000>;
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&trackpad_irq>;
 
 	trackpad: trackpad@15 {
 		compatible = "elan,ekth3000";
-		interrupt-parent = <&pio>;
-		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_irq>;
 		reg = <0x15>;
 		vcc-supply = <&mt6397_vgp6_reg>;
 		wakeup-source;
@@ -439,8 +435,7 @@
 	btmrvl: btmrvl@2 {
 		compatible = "marvell,sd8897-bt";
 		reg = <2>;
-		interrupt-parent = <&pio>;
-		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 119 IRQ_TYPE_LEVEL_LOW>;
 		marvell,wakeup-pin = /bits/ 16 <0x0d>;
 		marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
 	};
@@ -448,8 +443,7 @@
 	mwifiex: mwifiex@1 {
 		compatible = "marvell,sd8897";
 		reg = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 38 IRQ_TYPE_LEVEL_LOW>;
 		marvell,wakeup-pin = <3>;
 	};
 };
@@ -931,14 +925,11 @@
 &pwrap {
 	pmic: pmic {
 		compatible = "mediatek,mt6397";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		clock: mt6397clock {
+		clock: clocks {
 			compatible = "mediatek,mt6397-clk";
 			#clock-cells = <1>;
 		};
@@ -949,11 +940,10 @@
 			#gpio-cells = <2>;
 		};
 
-		regulator: mt6397regulator {
+		regulators {
 			compatible = "mediatek,mt6397-regulator";
 
 			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-compatible = "buck_vpca15";
 				regulator-name = "vpca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -963,7 +953,6 @@
 			};
 
 			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-compatible = "buck_vpca7";
 				regulator-name = "vpca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -973,7 +962,6 @@
 			};
 
 			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-compatible = "buck_vsramca15";
 				regulator-name = "vsramca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -982,7 +970,6 @@
 			};
 
 			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-compatible = "buck_vsramca7";
 				regulator-name = "vsramca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -991,7 +978,6 @@
 			};
 
 			mt6397_vcore_reg: buck_vcore {
-				regulator-compatible = "buck_vcore";
 				regulator-name = "vcore";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -1000,7 +986,6 @@
 			};
 
 			mt6397_vgpu_reg: buck_vgpu {
-				regulator-compatible = "buck_vgpu";
 				regulator-name = "vgpu";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -1009,7 +994,6 @@
 			};
 
 			mt6397_vdrm_reg: buck_vdrm {
-				regulator-compatible = "buck_vdrm";
 				regulator-name = "vdrm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1400000>;
@@ -1018,7 +1002,6 @@
 			};
 
 			mt6397_vio18_reg: buck_vio18 {
-				regulator-compatible = "buck_vio18";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <1980000>;
@@ -1027,18 +1010,15 @@
 			};
 
 			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-compatible = "ldo_vtcxo";
 				regulator-name = "vtcxo";
 				regulator-always-on;
 			};
 
 			mt6397_va28_reg: ldo_va28 {
-				regulator-compatible = "ldo_va28";
 				regulator-name = "va28";
 			};
 
 			mt6397_vcama_reg: ldo_vcama {
-				regulator-compatible = "ldo_vcama";
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1046,18 +1026,15 @@
 			};
 
 			mt6397_vio28_reg: ldo_vio28 {
-				regulator-compatible = "ldo_vio28";
 				regulator-name = "vio28";
 				regulator-always-on;
 			};
 
 			mt6397_vusb_reg: ldo_vusb {
-				regulator-compatible = "ldo_vusb";
 				regulator-name = "vusb";
 			};
 
 			mt6397_vmc_reg: ldo_vmc {
-				regulator-compatible = "ldo_vmc";
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -1065,7 +1042,6 @@
 			};
 
 			mt6397_vmch_reg: ldo_vmch {
-				regulator-compatible = "ldo_vmch";
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -1073,7 +1049,6 @@
 			};
 
 			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-compatible = "ldo_vemc3v3";
 				regulator-name = "vemc_3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -1081,7 +1056,6 @@
 			};
 
 			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-compatible = "ldo_vgp1";
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1089,7 +1063,6 @@
 			};
 
 			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-compatible = "ldo_vgp2";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1097,7 +1070,6 @@
 			};
 
 			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-compatible = "ldo_vgp3";
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1105,7 +1077,6 @@
 			};
 
 			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-compatible = "ldo_vgp4";
 				regulator-name = "vgp4";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -1113,7 +1084,6 @@
 			};
 
 			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-compatible = "ldo_vgp5";
 				regulator-name = "vgp5";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
@@ -1121,7 +1091,6 @@
 			};
 
 			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-compatible = "ldo_vgp6";
 				regulator-name = "vgp6";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1130,7 +1099,6 @@
 			};
 
 			mt6397_vibr_reg: ldo_vibr {
-				regulator-compatible = "ldo_vibr";
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1138,15 +1106,9 @@
 			};
 		};
 
-		rtc: mt6397rtc {
+		rtc: rtc {
 			compatible = "mediatek,mt6397-rtc";
 		};
-
-		syscfg_pctl_pmic: syscfg_pctl_pmic@c000 {
-			compatible = "mediatek,mt6397-pctl-pmic-syscfg",
-				     "syscon";
-			reg = <0 0x0000c000 0 0x0108>;
-		};
 	};
 };
 
@@ -1160,9 +1122,9 @@
 		compatible = "google,cros-ec-spi";
 		reg = <0x0>;
 		spi-max-frequency = <12000000>;
-		interrupt-parent = <&pio>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 0 IRQ_TYPE_LEVEL_LOW>;
 		google,cros-ec-spi-msg-delay = <500>;
+		wakeup-source;
 
 		i2c_tunnel: i2c-tunnel0 {
 			compatible = "google,cros-ec-i2c-tunnel";
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index d258c80213b2..9fffed0ef4bf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -41,7 +41,7 @@
 
 	extcon_usb: extcon_iddig {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
 	};
 
 	usb_p1_vbus: regulator-usb-p1 {
@@ -213,14 +213,14 @@
 				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
 				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins_clk {
 			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
 			bias-pull-down;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 		};
 
 		pins_insert {
@@ -241,13 +241,13 @@
 				 <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
 				 <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins_clk {
 			pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
 		};
 
@@ -265,13 +265,13 @@
 				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
 				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins_clk {
 			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 	};
@@ -303,16 +303,14 @@
 
 	pmic: pmic {
 		compatible = "mediatek,mt6397";
-		interrupt-parent = <&pio>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		mt6397regulator: mt6397regulator {
+		regulators {
 			compatible = "mediatek,mt6397-regulator";
 
 			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-compatible = "buck_vpca15";
 				regulator-name = "vpca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -321,7 +319,6 @@
 			};
 
 			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-compatible = "buck_vpca7";
 				regulator-name = "vpca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -330,7 +327,6 @@
 			};
 
 			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-compatible = "buck_vsramca15";
 				regulator-name = "vsramca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -339,7 +335,6 @@
 			};
 
 			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-compatible = "buck_vsramca7";
 				regulator-name = "vsramca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -348,7 +343,6 @@
 			};
 
 			mt6397_vcore_reg: buck_vcore {
-				regulator-compatible = "buck_vcore";
 				regulator-name = "vcore";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -357,7 +351,6 @@
 			};
 
 			mt6397_vgpu_reg: buck_vgpu {
-				regulator-compatible = "buck_vgpu";
 				regulator-name = "vgpu";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -366,7 +359,6 @@
 			};
 
 			mt6397_vdrm_reg: buck_vdrm {
-				regulator-compatible = "buck_vdrm";
 				regulator-name = "vdrm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1400000>;
@@ -375,7 +367,6 @@
 			};
 
 			mt6397_vio18_reg: buck_vio18 {
-				regulator-compatible = "buck_vio18";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <1980000>;
@@ -384,19 +375,16 @@
 			};
 
 			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-compatible = "ldo_vtcxo";
 				regulator-name = "vtcxo";
 				regulator-always-on;
 			};
 
 			mt6397_va28_reg: ldo_va28 {
-				regulator-compatible = "ldo_va28";
 				regulator-name = "va28";
 				regulator-always-on;
 			};
 
 			mt6397_vcama_reg: ldo_vcama {
-				regulator-compatible = "ldo_vcama";
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <2800000>;
@@ -404,18 +392,15 @@
 			};
 
 			mt6397_vio28_reg: ldo_vio28 {
-				regulator-compatible = "ldo_vio28";
 				regulator-name = "vio28";
 				regulator-always-on;
 			};
 
 			mt6397_vusb_reg: ldo_vusb {
-				regulator-compatible = "ldo_vusb";
 				regulator-name = "vusb";
 			};
 
 			mt6397_vmc_reg: ldo_vmc {
-				regulator-compatible = "ldo_vmc";
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -423,7 +408,6 @@
 			};
 
 			mt6397_vmch_reg: ldo_vmch {
-				regulator-compatible = "ldo_vmch";
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -431,7 +415,6 @@
 			};
 
 			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-compatible = "ldo_vemc3v3";
 				regulator-name = "vemc_3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -439,7 +422,6 @@
 			};
 
 			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-compatible = "ldo_vgp1";
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1220000>;
 				regulator-max-microvolt = <3300000>;
@@ -447,7 +429,6 @@
 			};
 
 			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-compatible = "ldo_vgp2";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
@@ -455,7 +436,6 @@
 			};
 
 			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-compatible = "ldo_vgp3";
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -463,7 +443,6 @@
 			};
 
 			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-compatible = "ldo_vgp4";
 				regulator-name = "vgp4";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -471,7 +450,6 @@
 			};
 
 			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-compatible = "ldo_vgp5";
 				regulator-name = "vgp5";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
@@ -479,7 +457,6 @@
 			};
 
 			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-compatible = "ldo_vgp6";
 				regulator-name = "vgp6";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -487,7 +464,6 @@
 			};
 
 			mt6397_vibr_reg: ldo_vibr {
-				regulator-compatible = "ldo_vibr";
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1300000>;
 				regulator-max-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index c47d7d900f28..122a57c3780b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -222,14 +222,14 @@
 		};
 	};
 
-	pmu_a53 {
+	pmu-a53 {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	pmu_a72 {
+	pmu-a72 {
 		compatible = "arm,cortex-a72-pmu";
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 13 IRQ_TYPE_LEVEL_LOW>;
@@ -286,7 +286,7 @@
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit0 {
+				cpu_crit: cpu-crit0 {
 					temperature = <115000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -318,7 +318,15 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		vpu_dma_reserved: vpu_dma_mem_region@b7000000 {
+
+		afe_dma_mem: audio-dma-pool {
+			compatible = "shared-dma-pool";
+			size = <0 0x100000>;
+			alignment = <0 0x10>;
+			no-map;
+		};
+
+		vpu_dma_reserved: vpu-dma-mem@b7000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xb7000000 0 0x500000>;
 			alignment = <0x1000>;
@@ -352,21 +360,21 @@
 			#clock-cells = <1>;
 		};
 
-		infracfg: power-controller@10001000 {
+		infracfg: clock-controller@10001000 {
 			compatible = "mediatek,mt8173-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
-		pericfg: power-controller@10003000 {
+		pericfg: clock-controller@10003000 {
 			compatible = "mediatek,mt8173-pericfg", "syscon";
 			reg = <0 0x10003000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
-		syscfg_pctl_a: syscfg_pctl_a@10005000 {
+		syscfg_pctl_a: syscon@10005000 {
 			compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
 			reg = <0 0x10005000 0 0x1000>;
 		};
@@ -564,7 +572,7 @@
 			memory-region = <&vpu_dma_reserved>;
 		};
 
-		sysirq: intpol-controller@10200620 {
+		sysirq: interrupt-controller@10200620 {
 			compatible = "mediatek,mt8173-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
@@ -590,6 +598,15 @@
 			reg = <0 0x10206000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			socinfo-data1@40 {
+				reg = <0x040 0x4>;
+			};
+
+			socinfo-data2@44 {
+				reg = <0x044 0x4>;
+			};
+
 			thermal_calibration: calib@528 {
 				reg = <0x528 0xc>;
 			};
@@ -878,6 +895,7 @@
 					  <&topckgen CLK_TOP_AUD_2_SEL>;
 			assigned-clock-parents = <&topckgen CLK_TOP_APLL1>,
 						 <&topckgen CLK_TOP_APLL2>;
+			memory-region = <&afe_dma_mem>;
 		};
 
 		mmc0: mmc@11230000 {
@@ -1246,8 +1264,7 @@
 		};
 
 		pwm0: pwm@1401e000 {
-			compatible = "mediatek,mt8173-disp-pwm",
-				     "mediatek,mt6595-disp-pwm";
+			compatible = "mediatek,mt8173-disp-pwm";
 			reg = <0 0x1401e000 0 0x1000>;
 			#pwm-cells = <2>;
 			clocks = <&mmsys CLK_MM_DISP_PWM026M>,
@@ -1257,8 +1274,7 @@
 		};
 
 		pwm1: pwm@1401f000 {
-			compatible = "mediatek,mt8173-disp-pwm",
-				     "mediatek,mt6595-disp-pwm";
+			compatible = "mediatek,mt8173-disp-pwm";
 			reg = <0 0x1401f000 0 0x1000>;
 			#pwm-cells = <2>;
 			clocks = <&mmsys CLK_MM_DISP_PWM126M>,
@@ -1368,10 +1384,9 @@
 			#clock-cells = <1>;
 		};
 
-		vcodec_dec: vcodec@16000000 {
+		vcodec_dec: vcodec@16020000 {
 			compatible = "mediatek,mt8173-vcodec-dec";
-			reg = <0 0x16000000 0 0x100>,	/* VDEC_SYS */
-			      <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
+			reg = <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
 			      <0 0x16021000 0 0x800>,	/* VDEC_LD */
 			      <0 0x16021800 0 0x800>,	/* VDEC_TOP */
 			      <0 0x16022000 0 0x1000>,	/* VDEC_CM */
@@ -1382,6 +1397,8 @@
 			      <0 0x16027000 0 0x800>,	/* VDEC_HWQ */
 			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
 			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
+			reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+				    "hwd", "hwq", "hwb", "hwg";
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
 			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
@@ -1392,6 +1409,7 @@
 				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
 			mediatek,vpu = <&vpu>;
+			mediatek,vdecsys = <&vdecsys>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>;
 			clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
 				 <&topckgen CLK_TOP_UNIVPLL_D2>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index 77f9ab94c00b..f04baea5d6cb 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -160,7 +160,6 @@
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -169,7 +168,6 @@
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -178,7 +176,6 @@
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -187,7 +184,6 @@
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -196,7 +192,6 @@
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -205,7 +200,6 @@
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -381,6 +375,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
index 2c69e7658dba..f69ffcb9792a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -11,8 +11,7 @@
 		pinctrl-0 = <&da7219_pins>;
 		compatible = "dlg,da7219";
 		reg = <0x1a>;
-		interrupt-parent = <&pio>;
-		interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>;
+		interrupts-extended = <&pio 165 IRQ_TYPE_LEVEL_LOW>;
 
 		dlg,micbias-lvl = <2600>;
 		dlg,mic-amp-in-sel = "diff";
@@ -28,7 +27,7 @@
 			dlg,btn-cfg = <50>;
 			dlg,mic-det-thr = <500>;
 			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-det-rate = "32_64";
 			dlg,jack-rem-deb = <1>;
 
 			dlg,a-d-btn-thr = <0xa>;
@@ -40,8 +39,8 @@
 };
 
 &pio {
-	da7219_pins: da7219_pins {
-		pins1 {
+	da7219_pins: da7219-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO165__FUNC_GPIO165>;
 			input-enable;
 			bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
index 0799c48ade19..c4aedf8cbfcd 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
@@ -11,14 +11,13 @@
 		pinctrl-0 = <&ts3a227e_pins>;
 		compatible = "ti,ts3a227e";
 		reg = <0x3b>;
-		interrupt-parent = <&pio>;
-		interrupts = <157 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 157 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 	};
 };
 
 &pio {
-	ts3a227e_pins: ts3a227e_pins {
+	ts3a227e_pins: ts3a227e-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO157__FUNC_GPIO157>;
 			input-enable;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
index 19c1e2bee494..20b71f2e7159 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
@@ -30,3 +30,6 @@
 	};
 };
 
+&i2c2 {
+	i2c-scl-internal-delay-ns = <4100>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
index 072133fb0f01..83bbcfe62083 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google cozmo board";
+	chassis-type = "laptop";
 	compatible = "google,cozmo", "mediatek,mt8183";
 };
 
@@ -17,6 +18,8 @@
 };
 
 &i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
 	trackpad@2c {
 		compatible = "hid-over-i2c";
 		reg = <0x2c>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
index 552bfc726999..7bc7c2687d6f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
@@ -14,20 +14,23 @@
 };
 
 &touchscreen {
-	status = "okay";
+	compatible = "elan,ekth6a12nay";
 
-	compatible = "hid-over-i2c";
-	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
+	vcc33-supply = <&pp3300_alw>;
+	vccio-supply = <&pp1800_alw>;
+};
+
+&mt6358codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
 };
 
 &qca_wifi {
 	qcom,ath10k-calibration-variant = "GO_DAMU";
 };
 
+&i2c2 {
+	i2c-scl-internal-delay-ns = <20000>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
index 77b96ddf648e..863f3e403de8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google fennel sku1 board";
+	chassis-type = "convertible";
 	compatible = "google,fennel-sku1", "google,fennel", "mediatek,mt8183";
 
 	pwmleds {
@@ -26,17 +27,12 @@
 };
 
 &touchscreen {
-	status = "okay";
+	compatible = "elan,ekth6a12nay";
 
-	compatible = "hid-over-i2c";
-	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
+	vcc33-supply = <&pp3300_alw>;
 };
 
 &qca_wifi {
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
index 37e6e58f63b7..e0a583ce4a0b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
@@ -9,21 +9,17 @@
 
 / {
 	model = "Google fennel sku6 board";
+	chassis-type = "convertible";
 	compatible = "google,fennel-sku6", "google,fennel", "mediatek,mt8183";
 };
 
 &touchscreen {
-	status = "okay";
+	compatible = "elan,ekth6a12nay";
 
-	compatible = "hid-over-i2c";
-	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
+	vcc33-supply = <&pp3300_alw>;
 };
 
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
index 0e09604004d5..7874c9a20e12 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
@@ -9,21 +9,17 @@
 
 / {
 	model = "Google fennel sku7 board";
+	chassis-type = "convertible";
 	compatible = "google,fennel-sku7", "google,fennel", "mediatek,mt8183";
 };
 
 &touchscreen {
-	status = "okay";
+	compatible = "elan,ekth6a12nay";
 
-	compatible = "hid-over-i2c";
-	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
+	vcc33-supply = <&pp3300_alw>;
 };
 
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
index bbe6c338f465..f9c1ec366b26 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
@@ -25,3 +25,6 @@
 	};
 };
 
+&i2c2 {
+	i2c-scl-internal-delay-ns = <21500>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
index 3fc5a6181d7e..877256eab262 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google fennel14 sku2 board";
+	chassis-type = "laptop";
 	compatible = "google,fennel-sku2", "google,fennel", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
index 23ad0b91e977..b981dd31a430 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google fennel14 sku0 board";
+	chassis-type = "laptop";
 	compatible = "google,fennel-sku0", "google,fennel", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts
index e5bd9191e426..f3ac9c074226 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google kappa board";
+	chassis-type = "laptop";
 	compatible = "google,kappa", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
index 8fa89db03e63..561770fcf69e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
@@ -9,5 +9,21 @@
 
 / {
 	model = "Google kenzo sku17 board";
+	chassis-type = "laptop";
 	compatible = "google,juniper-sku17", "google,juniper", "mediatek,mt8183";
 };
+
+&i2c0 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
new file mode 100644
index 000000000000..ddb993521bbf
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google makomo sku0 board";
+	chassis-type = "laptop";
+	compatible = "google,makomo-sku0", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <6>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
new file mode 100644
index 000000000000..10c4f920a7d8
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi"
+
+/ {
+	model = "Google makomo sku1 board";
+	chassis-type = "laptop";
+	compatible = "google,makomo-sku1", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <6>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
new file mode 100644
index 000000000000..8ce9568fee95
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku1", "google,pico", "mediatek,mt8183";
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
new file mode 100644
index 000000000000..cce326aec1aa
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico6 board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku2", "google,pico", "mediatek,mt8183";
+
+	bt_wakeup: bt-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_wakeup>;
+
+		event-wobt {
+			label = "Wake on BT";
+			gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&wifi_wakeup_event {
+	gpios = <&pio 113 GPIO_ACTIVE_LOW>;
+};
+
+&wifi_pwrseq {
+	post-power-on-delay-ms = <50>;
+
+	/* Toggle WIFI_ENABLE to reset the chip. */
+	reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+};
+
+&wifi_pins_pwrseq {
+	pins-wifi-enable {
+		pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+	};
+};
+
+&mmc1_pins_default {
+	pins-cmd-dat {
+		drive-strength = <6>;
+	};
+	pins-clk {
+		drive-strength = <6>;
+	};
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <6>;
+	};
+};
+
+&mmc1 {
+	bluetooth@2 {
+		reg = <2>;
+		compatible = "mediatek,mt7921s-bluetooth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_reset>;
+		reset-gpios = <&pio 120 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pio {
+	bt_pins_wakeup: bt-pins-wakeup {
+		piins-bt-wakeup {
+			pinmux = <PINMUX_GPIO42__FUNC_GPIO42>;
+			input-enable;
+		};
+	};
+
+	bt_pins_reset: bt-pins-reset {
+		pins-bt-reset {
+			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
+			output-high;
+		};
+	};
+};
+
+/delete-node/ &bluetooth;
+/delete-node/ &bt_pins;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
index 89208b843b27..928b205a616a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google willow board sku0";
+	chassis-type = "laptop";
 	compatible = "google,willow-sku0", "google,willow", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
index c7b20441d053..71307a8052d6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
@@ -9,5 +9,6 @@
 
 / {
 	model = "Google willow board sku1";
+	chassis-type = "laptop";
 	compatible = "google,willow-sku1", "google,willow", "mediatek,mt8183";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
index 76d33540166f..c942e461a177 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
@@ -6,6 +6,21 @@
 /dts-v1/;
 #include "mt8183-kukui-jacuzzi.dtsi"
 
+&i2c0 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
 &i2c2 {
 	trackpad@2c {
 		compatible = "hid-over-i2c";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 820260348de9..1b74ec171c10 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -8,35 +8,37 @@
 #include <arm/cros-ec-keyboard.dtsi>
 
 / {
-	pp1200_mipibrdg: pp1200-mipibrdg {
+	pp1000_mipibrdg: pp1000-mipibrdg {
 		compatible = "regulator-fixed";
-		regulator-name = "pp1200_mipibrdg";
+		regulator-name = "pp1000_mipibrdg";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pp1200_mipibrdg_en>;
+		pinctrl-0 = <&pp1000_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
 
 		gpio = <&pio 54 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp1800_alw>;
 	};
 
 	pp1800_mipibrdg: pp1800-mipibrdg {
 		compatible = "regulator-fixed";
 		regulator-name = "pp1800_mipibrdg";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pp1800_lcd_en>;
+		pinctrl-0 = <&pp1800_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
 
 		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp1800_alw>;
 	};
 
 	pp3300_panel: pp3300-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300_panel";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pp3300_panel_pins>;
 
@@ -44,18 +46,20 @@
 		regulator-boot-on;
 
 		gpio = <&pio 35 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_alw>;
 	};
 
-	vddio_mipibrdg: vddio-mipibrdg {
+	pp3300_mipibrdg: pp3300-mipibrdg {
 		compatible = "regulator-fixed";
-		regulator-name = "vddio_mipibrdg";
+		regulator-name = "pp3300_mipibrdg";
 		pinctrl-names = "default";
-		pinctrl-0 = <&vddio_mipibrdg_en>;
+		pinctrl-0 = <&pp3300_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
 
 		gpio = <&pio 37 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_alw>;
 	};
 
 	volume_buttons: volume-buttons {
@@ -89,18 +93,8 @@
 	};
 };
 
-&dsi0 {
-	status = "okay";
-	/delete-property/#size-cells;
-	/delete-property/#address-cells;
-	/delete-node/panel@0;
-	ports {
-		port {
-			dsi_out: endpoint {
-				remote-endpoint = <&anx7625_in>;
-			};
-		};
-	};
+&dsi_out {
+	remote-endpoint = <&anx7625_in>;
 };
 
 &i2c0 {
@@ -149,28 +143,30 @@
 		reg = <0x58>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&anx7625_pins>;
-		panel_flags = <1>;
 		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
-		vdd10-supply = <&pp1200_mipibrdg>;
+		vdd10-supply = <&pp1000_mipibrdg>;
 		vdd18-supply = <&pp1800_mipibrdg>;
-		vdd33-supply = <&vddio_mipibrdg>;
+		vdd33-supply = <&pp3300_mipibrdg>;
 
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-			anx7625_in: endpoint {
-				remote-endpoint = <&dsi_out>;
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
+			port@1 {
+				reg = <1>;
 
-			anx7625_out: endpoint {
-				remote-endpoint = <&panel_in>;
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
 			};
 		};
 
@@ -394,14 +390,14 @@
 		"",
 		"";
 
-	pp1200_mipibrdg_en: pp1200-mipibrdg-en {
+	pp1000_mipibrdg_en: pp1000-mipibrdg-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_mipibrdg_en: pp1800-mipibrdg-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
@@ -409,20 +405,20 @@
 	};
 
 	pp3300_panel_pins: pp3300-panel-pins {
-		panel_3v3_enable: panel-3v3-enable {
+		panel_3v3_enable: pins-panel-en {
 			pinmux = <PINMUX_GPIO35__FUNC_GPIO35>;
 			output-low;
 		};
 	};
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
@@ -443,27 +439,27 @@
 	};
 
 	touchscreen_pins: touchscreen-pins {
-		touch-int-odl {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		touch-rst-l {
+		pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 			output-high;
 		};
 	};
 
 	trackpad_pins: trackpad-pins {
-		trackpad-int {
+		pins-intn {
 			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
 			input-enable;
 			bias-disable; /* pulled externally */
 		};
 	};
 
-	vddio_mipibrdg_en: vddio-mipibrdg-en {
+	pp3300_mipibrdg_en: pp3300-mipibrdg-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
 			output-low;
@@ -471,13 +467,13 @@
 	};
 
 	volume_button_pins: volume-button-pins {
-		voldn-btn-odl {
+		pins-voldn {
 			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		volup-btn-odl {
+		pins-volup {
 			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
 			input-enable;
 			bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
index fcce8ea1232e..1ecf39458d93 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
@@ -14,6 +14,24 @@
 		     "google,kakadu", "mediatek,mt8183";
 };
 
+&i2c0 {
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&panel {
+	compatible = "boe,tv105wum-nw0";
+};
+
 &sound {
 	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
index ebfabba72507..ba74109a4909 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
@@ -13,3 +13,21 @@
 	compatible = "google,kakadu-rev3", "google,kakadu-rev2",
 			"google,kakadu", "mediatek,mt8183";
 };
+
+&i2c0 {
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&panel {
+	compatible = "boe,tv105wum-nw0";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index a11adeb29b1f..d71972c94e42 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -61,21 +61,35 @@
 	firmware-name = "nvm_00440302_i2s_eu.bin";
 };
 
-&i2c0 {
-	status = "okay";
-
-	touchscreen: touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&open_touch>;
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
 
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
 
-		post-power-on-delay-ms = <10>;
-		hid-descr-addr = <0x0001>;
-	};
+&i2c0 {
+	status = "okay";
 };
 
 &mt6358_vcama2_reg {
@@ -105,9 +119,9 @@
 	clock-frequency = <400000>;
 	vbus-supply = <&mt6358_vcn18_reg>;
 
-	eeprom@54 {
+	eeprom@50 {
 		compatible = "atmel,24c32";
-		reg = <0x54>;
+		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&mt6358_vcn18_reg>;
 	};
@@ -317,35 +331,35 @@
 		"",
 		"";
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_lcd_en: pp1800-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
 		};
 	};
 
-	open_touch: open_touch {
-		irq_pin {
+	open_touch: opentouch-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		rst_pin {
+		pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 
 			/*
@@ -362,8 +376,8 @@
 		};
 	};
 
-	pen_eject: peneject {
-		pen_eject {
+	pen_eject: pen-pins {
+		pins-eject {
 			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
 			input-enable;
 			/* External pull-up. */
@@ -373,6 +387,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
@@ -384,5 +402,5 @@
 
 &panel {
 	status = "okay";
-	compatible = "boe,tv105wum-nw0";
+	/* compatible will be set in board dts */
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
new file mode 100644
index 000000000000..2b5a8d1f900e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google katsu board";
+	chassis-type = "tablet";
+	compatible = "google,katsu-sku32", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+	touchscreen1: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&pp3300_alw>;
+	};
+};
+
+&panel {
+	compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KATSU";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
new file mode 100644
index 000000000000..75fadf2c7059
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+/ {
+	model = "Google katsu sku38 board";
+	chassis-type = "tablet";
+	compatible = "google,katsu-sku38", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+	touchscreen1: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&pp3300_alw>;
+	};
+};
+
+&panel {
+	compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KATSU";
+};
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts
index 7739358008ee..5a416143b4a0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts
@@ -12,6 +12,7 @@
 
 / {
 	model = "MediaTek kodama sku32 board";
+	chassis-type = "tablet";
 	compatible = "google,kodama-sku32", "google,kodama", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index 4864c39e53a4..b702ff066636 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -42,14 +42,41 @@
 	};
 };
 
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
 &i2c0 {
 	status = "okay";
 
 	touchscreen: touchscreen@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&touch_default>;
 
@@ -80,9 +107,9 @@
 	clock-frequency = <400000>;
 	vbus-supply = <&mt6358_vcn18_reg>;
 
-	eeprom@54 {
+	eeprom@50 {
 		compatible = "atmel,24c64";
-		reg = <0x54>;
+		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&mt6358_vcn18_reg>;
 	};
@@ -293,35 +320,35 @@
 		"",
 		"";
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_lcd_en: pp1800-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
 		};
 	};
 
-	touch_default: touchdefault {
-		pin_irq {
+	touch_default: touch-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		touch_pin_reset: pin_reset {
+		touch_pin_reset: pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 
 			/*
@@ -340,6 +367,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index d5f41c6c9881..b6cfcafd8b06 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -45,6 +45,34 @@
 	firmware-name = "nvm_00440302_i2s_eu.bin";
 };
 
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -54,8 +82,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&open_touch>;
 
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
 
 		post-power-on-delay-ms = <10>;
 		hid-descr-addr = <0x0001>;
@@ -89,9 +116,9 @@
 	clock-frequency = <400000>;
 	vbus-supply = <&mt6358_vcn18_reg>;
 
-	eeprom@54 {
+	eeprom@50 {
 		compatible = "atmel,24c32";
-		reg = <0x54>;
+		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&mt6358_vcn18_reg>;
 	};
@@ -297,35 +324,35 @@
 		"",
 		"";
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_lcd_en: pp1800-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
 		};
 	};
 
-	open_touch: open_touch {
-		irq_pin {
+	open_touch: opentouch-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		rst_pin {
+		pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 
 			/*
@@ -344,6 +371,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 7881a27be029..4b87d4940c8c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -24,7 +24,7 @@
 	backlight_lcd0: backlight_lcd0 {
 		compatible = "pwm-backlight";
 		pwms = <&pwm0 0 500000>;
-		power-supply = <&bl_pp5000>;
+		power-supply = <&reg_vsys>;
 		enable-gpios = <&pio 176 0>;
 		brightness-levels = <0 1023>;
 		num-interpolated-steps = <1023>;
@@ -47,42 +47,9 @@
 	it6505_pp18_reg: regulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "it6505_pp18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
 		gpio = <&pio 178 0>;
 		enable-active-high;
-	};
-
-	lcd_pp3300: regulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd_pp3300";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	bl_pp5000: regulator2 {
-		compatible = "regulator-fixed";
-		regulator-name = "bl_pp5000";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	mmc1_fixed_power: regulator3 {
-		compatible = "regulator-fixed";
-		regulator-name = "mmc1_power";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	mmc1_fixed_io: regulator4 {
-		compatible = "regulator-fixed";
-		regulator-name = "mmc1_io";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		vin-supply = <&pp1800_alw>;
 	};
 
 	pp1800_alw: regulator5 {
@@ -92,6 +59,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_vsys>;
 	};
 
 	pp3300_alw: regulator6 {
@@ -101,6 +69,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vsys>;
 	};
 
 	/* system wide semi-regulated power rail from charger */
@@ -116,6 +85,13 @@
 		#size-cells = <2>;
 		ranges;
 
+		afe_dma_mem: audio-dma-pool {
+			compatible = "shared-dma-pool";
+			size = <0 0x100000>;
+			alignment = <0 0x10>;
+			no-map;
+		};
+
 		scp_mem_reserved: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
@@ -136,6 +112,7 @@
 
 	btsco: bt-sco {
 		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
 	};
 
 	wifi_pwrseq: wifi-pwrseq {
@@ -152,7 +129,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&wifi_pins_wakeup>;
 
-		button-wowlan {
+		wifi_wakeup_event: event-wowlan {
 			label = "Wake on WiFi";
 			gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
@@ -229,6 +206,10 @@
 	};
 };
 
+&afe {
+	memory-region = <&afe_dma_mem>;
+};
+
 &auxadc {
 	status = "okay";
 };
@@ -271,33 +252,6 @@
 
 &dsi0 {
 	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	panel: panel@0 {
-		/* compatible will be set in board dts */
-		reg = <0>;
-		enable-gpios = <&pio 45 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_pins_default>;
-		avdd-supply = <&ppvarn_lcd>;
-		avee-supply = <&ppvarp_lcd>;
-		pp1800-supply = <&pp1800_lcd>;
-		backlight = <&backlight_lcd0>;
-		rotation = <270>;
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-	};
-
-	ports {
-		port {
-			dsi_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
 };
 
 &gic {
@@ -379,8 +333,8 @@
 	pinctrl-names = "default", "state_uhs";
 	pinctrl-0 = <&mmc1_pins_default>;
 	pinctrl-1 = <&mmc1_pins_uhs>;
-	vmmc-supply = <&mmc1_fixed_power>;
-	vqmmc-supply = <&mmc1_fixed_io>;
+	vmmc-supply = <&pp3300_alw>;
+	vqmmc-supply = <&pp1800_alw>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	max-frequency = <200000000>;
@@ -433,7 +387,6 @@
 };
 
 &mt6358_vgpu_reg {
-	regulator-min-microvolt = <625000>;
 	regulator-max-microvolt = <900000>;
 
 	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
@@ -459,7 +412,7 @@
 };
 
 &pio {
-	aud_pins_default: audiopins {
+	aud_pins_default: audio-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO97__FUNC_I2S2_MCK>,
 				<PINMUX_GPIO98__FUNC_I2S2_BCK>,
@@ -481,7 +434,7 @@
 		};
 	};
 
-	aud_pins_tdm_out_on: audiotdmouton {
+	aud_pins_tdm_out_on: audio-tdmout-on-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_TDM_BCK_2ND>,
 				<PINMUX_GPIO170__FUNC_TDM_LRCK_2ND>,
@@ -489,11 +442,11 @@
 				<PINMUX_GPIO172__FUNC_TDM_DATA1_2ND>,
 				<PINMUX_GPIO173__FUNC_TDM_DATA2_2ND>,
 				<PINMUX_GPIO10__FUNC_TDM_DATA3>; /*8ch-i2s to it6505*/
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 		};
 	};
 
-	aud_pins_tdm_out_off: audiotdmoutoff {
+	aud_pins_tdm_out_off: audio-tdmout-off-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_GPIO169>,
 				<PINMUX_GPIO170__FUNC_GPIO170>,
@@ -503,7 +456,7 @@
 				<PINMUX_GPIO10__FUNC_GPIO10>;
 			input-enable;
 			bias-pull-down;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 		};
 	};
 
@@ -514,76 +467,70 @@
 		};
 	};
 
-	ec_ap_int_odl: ec-ap-int-odl {
-		pins1 {
+	ec_ap_int_odl: ec-ap-int-odl-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
 			input-enable;
 			bias-pull-up;
 		};
 	};
 
-	h1_int_od_l: h1-int-od-l {
-		pins1 {
+	h1_int_od_l: h1-int-od-l-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
 			input-enable;
 		};
 	};
 
-	i2c0_pins: i2c0 {
+	i2c0_pins: i2c0-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c1_pins: i2c1 {
+	i2c1_pins: i2c1-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c2_pins: i2c2 {
+	i2c2_pins: i2c2-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			bias-disable;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c3_pins: i2c3 {
+	i2c3_pins: i2c3-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c4_pins: i2c4 {
+	i2c4_pins: i2c4-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			bias-disable;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c5_pins: i2c5 {
+	i2c5_pins: i2c5-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c6_pins: i2c6 {
+	i2c6_pins: i2c6-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
 				 <PINMUX_GPIO12__FUNC_SDA6>;
@@ -591,7 +538,7 @@
 		};
 	};
 
-	mmc0_pins_default: mmc0-pins-default {
+	mmc0_pins_default: mmc0-default-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
@@ -610,7 +557,7 @@
 		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins-rst {
@@ -639,13 +586,13 @@
 		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins-ds {
 			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins-rst {
@@ -655,7 +602,7 @@
 		};
 	};
 
-	mmc1_pins_default: mmc1-pins-default {
+	mmc1_pins_default: mmc1-default-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
@@ -663,45 +610,45 @@
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			input-enable;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 	};
 
-	mmc1_pins_uhs: mmc1-pins-uhs {
+	mmc1_pins_uhs: mmc1-uhs-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
-			mediatek,pull-down-adv = <10>;
+			drive-strength = <8>;
+			mediatek,pull-down-adv = <2>;
 			input-enable;
 		};
 	};
 
-	panel_pins_default: panel-pins-default {
-		panel-reset {
+	panel_pins_default: panel-pins {
+		pins-panel-reset {
 			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
 			output-low;
 			bias-pull-up;
 		};
 	};
 
-	pwm0_pin_default: pwm0-pin-default {
+	pwm0_pin_default: pwm0-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
 			output-high;
@@ -712,15 +659,15 @@
 		};
 	};
 
-	scp_pins: scp {
+	scp_pins: scp-pins {
 		pins-scp-uart {
 			pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
 				 <PINMUX_GPIO112__FUNC_TP_UTXD1_AO>;
 		};
 	};
 
-	spi0_pins: spi0 {
-		pins-spi {
+	spi0_pins: spi0-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
 				 <PINMUX_GPIO86__FUNC_GPIO86>,
 				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -729,8 +676,8 @@
 		};
 	};
 
-	spi1_pins: spi1 {
-		pins-spi {
+	spi1_pins: spi1-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
 				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
 				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -739,21 +686,21 @@
 		};
 	};
 
-	spi2_pins: spi2 {
-		pins-spi {
+	spi2_pins: spi2-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
 				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
 				 <PINMUX_GPIO2__FUNC_SPI2_CLK>;
 			bias-disable;
 		};
-		pins-spi-mi {
+		pins-miso {
 			pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
 			mediatek,pull-down-adv = <00>;
 		};
 	};
 
-	spi3_pins: spi3 {
-		pins-spi {
+	spi3_pins: spi3-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
 				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
 				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -762,8 +709,8 @@
 		};
 	};
 
-	spi4_pins: spi4 {
-		pins-spi {
+	spi4_pins: spi4-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
 				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
 				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -772,8 +719,8 @@
 		};
 	};
 
-	spi5_pins: spi5 {
-		pins-spi {
+	spi5_pins: spi5-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
 				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
 				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
@@ -782,7 +729,7 @@
 		};
 	};
 
-	uart0_pins_default: uart0-pins-default {
+	uart0_pins_default: uart0-pins {
 		pins-rx {
 			pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
 			input-enable;
@@ -793,7 +740,7 @@
 		};
 	};
 
-	uart1_pins_default: uart1-pins-default {
+	uart1_pins_default: uart1-pins {
 		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
 			input-enable;
@@ -804,7 +751,6 @@
 		};
 		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
 		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
@@ -812,7 +758,7 @@
 		};
 	};
 
-	uart1_pins_sleep: uart1-pins-sleep {
+	uart1_pins_sleep: uart1-sleep-pins {
 		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
 			input-enable;
@@ -823,7 +769,6 @@
 		};
 		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
 		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
@@ -831,14 +776,14 @@
 		};
 	};
 
-	wifi_pins_pwrseq: wifi-pins-pwrseq {
+	wifi_pins_pwrseq: wifi-pwr-pins {
 		pins-wifi-enable {
 			pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
 			output-low;
 		};
 	};
 
-	wifi_pins_wakeup: wifi-pins-wakeup {
+	wifi_pins_wakeup: wifi-wake-pins {
 		pins-wifi-wakeup {
 			pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
 			input-enable;
@@ -846,6 +791,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &pwm0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -873,10 +822,6 @@
 	domain-supply = <&mt6358_vgpu_reg>;
 };
 
-&soc_data {
-	status = "okay";
-};
-
 &spi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
@@ -884,14 +829,13 @@
 	status = "okay";
 	cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&h1_int_od_l>;
-		interrupt-parent = <&pio>;
-		interrupts = <153 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&pio 153 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
@@ -918,10 +862,10 @@
 		compatible = "google,cros-ec-spi";
 		reg = <0>;
 		spi-max-frequency = <3000000>;
-		interrupt-parent = <&pio>;
-		interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 151 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ec_ap_int_odl>;
+		wakeup-source;
 
 		i2c_tunnel: i2c-tunnel {
 			compatible = "google,cros-ec-i2c-tunnel";
@@ -935,10 +879,6 @@
 			google,usb-port-id = <0>;
 		};
 
-		cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		typec {
 			compatible = "google,cros-ec-typec";
 			#address-cells = <1>;
@@ -984,13 +924,13 @@
 };
 
 &thermal_zones {
-	tboard1 {
+	tboard1-thermal {
 		polling-delay = <1000>; /* milliseconds */
 		polling-delay-passive = <0>; /* milliseconds */
 		thermal-sensors = <&tboard_thermistor1>;
 	};
 
-	tboard2 {
+	tboard2-thermal {
 		polling-delay = <1000>; /* milliseconds */
 		polling-delay-passive = <0>; /* milliseconds */
 		thermal-sensors = <&tboard_thermistor2>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index b5784a60c315..f60ef3e53a09 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -33,7 +33,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		scp_mem_reserved: scp_mem_region@50000000 {
+		scp_mem_reserved: scp-mem@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
@@ -63,6 +63,18 @@
 		pulldown-ohm = <0>;
 		io-channels = <&auxadc 0>;
 	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_connector_out>;
+			};
+		};
+	};
 };
 
 &auxadc {
@@ -120,6 +132,43 @@
 	pinctrl-0 = <&i2c6_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	it66121hdmitx: hdmitx@4c {
+		compatible = "ite,it66121";
+		reg = <0x4c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ite_pins>;
+		reset-gpios = <&pio 160 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&pio>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		vcn33-supply = <&mt6358_vcn33_reg>;
+		vcn18-supply = <&mt6358_vcn18_reg>;
+		vrf12-supply = <&mt6358_vrf12_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				it66121_in: endpoint {
+					bus-width = <12>;
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hdmi_connector_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &keyboard {
@@ -197,7 +246,6 @@
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -206,7 +254,6 @@
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -215,7 +262,6 @@
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -224,7 +270,6 @@
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -233,7 +278,6 @@
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -242,7 +286,6 @@
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -281,7 +324,7 @@
 		pins_clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_rst {
@@ -310,13 +353,13 @@
 		pins_clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_ds {
 			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_rst {
@@ -334,13 +377,13 @@
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins_clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			input-enable;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_pmu {
@@ -356,24 +399,93 @@
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins_clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
-			mediatek,pull-down-adv = <10>;
+			drive-strength = <8>;
+			mediatek,pull-down-adv = <2>;
+			input-enable;
+		};
+	};
+
+	ite_pins: ite-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
 			input-enable;
+			bias-pull-up;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO160__FUNC_GPIO160>;
+			output-high;
 		};
 	};
+
+	dpi_func_pins: dpi-func-pins {
+		pins-dpi {
+			pinmux = <PINMUX_GPIO12__FUNC_I2S5_BCK>,
+				 <PINMUX_GPIO46__FUNC_I2S5_LRCK>,
+				 <PINMUX_GPIO47__FUNC_I2S5_DO>,
+				 <PINMUX_GPIO13__FUNC_DBPI_D0>,
+				 <PINMUX_GPIO14__FUNC_DBPI_D1>,
+				 <PINMUX_GPIO15__FUNC_DBPI_D2>,
+				 <PINMUX_GPIO16__FUNC_DBPI_D3>,
+				 <PINMUX_GPIO17__FUNC_DBPI_D4>,
+				 <PINMUX_GPIO18__FUNC_DBPI_D5>,
+				 <PINMUX_GPIO19__FUNC_DBPI_D6>,
+				 <PINMUX_GPIO20__FUNC_DBPI_D7>,
+				 <PINMUX_GPIO21__FUNC_DBPI_D8>,
+				 <PINMUX_GPIO22__FUNC_DBPI_D9>,
+				 <PINMUX_GPIO23__FUNC_DBPI_D10>,
+				 <PINMUX_GPIO24__FUNC_DBPI_D11>,
+				 <PINMUX_GPIO25__FUNC_DBPI_HSYNC>,
+				 <PINMUX_GPIO26__FUNC_DBPI_VSYNC>,
+				 <PINMUX_GPIO27__FUNC_DBPI_DE>,
+				 <PINMUX_GPIO28__FUNC_DBPI_CK>;
+		};
+	};
+
+	dpi_idle_pins: dpi-idle-pins {
+		pins-idle {
+			pinmux = <PINMUX_GPIO12__FUNC_GPIO12>,
+				 <PINMUX_GPIO46__FUNC_GPIO46>,
+				 <PINMUX_GPIO47__FUNC_GPIO47>,
+				 <PINMUX_GPIO13__FUNC_GPIO13>,
+				 <PINMUX_GPIO14__FUNC_GPIO14>,
+				 <PINMUX_GPIO15__FUNC_GPIO15>,
+				 <PINMUX_GPIO16__FUNC_GPIO16>,
+				 <PINMUX_GPIO17__FUNC_GPIO17>,
+				 <PINMUX_GPIO18__FUNC_GPIO18>,
+				 <PINMUX_GPIO19__FUNC_GPIO19>,
+				 <PINMUX_GPIO20__FUNC_GPIO20>,
+				 <PINMUX_GPIO21__FUNC_GPIO21>,
+				 <PINMUX_GPIO22__FUNC_GPIO22>,
+				 <PINMUX_GPIO23__FUNC_GPIO23>,
+				 <PINMUX_GPIO24__FUNC_GPIO24>,
+				 <PINMUX_GPIO25__FUNC_GPIO25>,
+				 <PINMUX_GPIO26__FUNC_GPIO26>,
+				 <PINMUX_GPIO27__FUNC_GPIO27>,
+				 <PINMUX_GPIO28__FUNC_GPIO28>;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };
 
+&cci {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
 &cpu0 {
 	proc-supply = <&mt6358_vproc12_reg>;
 };
@@ -414,6 +526,13 @@
 	status = "okay";
 };
 
-&dsi0 {
-	status = "disabled";
+&dpi0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_func_pins>;
+	pinctrl-1 = <&dpi_idle_pins>;
+	status = "okay";
+};
+
+&dpi_out {
+	remote-endpoint = <&it66121_in>;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 976dc968b3ca..960d8955d018 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -872,8 +872,6 @@
 
 				mfg_async: power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC {
 					reg = <MT8183_POWER_DOMAIN_MFG_ASYNC>;
-					clocks = <&topckgen CLK_TOP_MUX_MFG>;
-					clock-names = "mfg";
 					#address-cells = <1>;
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
@@ -1026,7 +1024,8 @@
 		};
 
 		keyboard: keyboard@10010000 {
-			compatible = "mediatek,mt6779-keypad";
+			compatible = "mediatek,mt8183-keypad",
+				     "mediatek,mt6779-keypad";
 			reg = <0 0x10010000 0 0x1000>;
 			interrupts = <GIC_SPI 186 IRQ_TYPE_EDGE_FALLING>;
 			clocks = <&clk26m>;
@@ -1183,22 +1182,10 @@
 			status = "disabled";
 		};
 
-		svs: svs@1100b000 {
-			compatible = "mediatek,mt8183-svs";
-			reg = <0 0x1100b000 0 0x1000>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&infracfg CLK_INFRA_THERM>;
-			clock-names = "main";
-			nvmem-cells = <&svs_calibration>,
-				      <&thermal_calibration>;
-			nvmem-cell-names = "svs-calibration-data",
-					   "t-calibration-data";
-		};
-
-		thermal: thermal@1100b000 {
+		thermal: thermal-sensor@1100b000 {
 			#thermal-sensor-cells = <1>;
 			compatible = "mediatek,mt8183-thermal";
-			reg = <0 0x1100b000 0 0x1000>;
+			reg = <0 0x1100b000 0 0xc00>;
 			clocks = <&infracfg CLK_INFRA_THERM>,
 				 <&infracfg CLK_INFRA_AUXADC>;
 			clock-names = "therm", "auxadc";
@@ -1210,6 +1197,18 @@
 			nvmem-cell-names = "calibration-data";
 		};
 
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8183-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>,
+				      <&thermal_calibration>;
+			nvmem-cell-names = "svs-calibration-data",
+					   "t-calibration-data";
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1585,6 +1584,15 @@
 			reg = <0 0x11f10000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			socinfo-data1@4c {
+				reg = <0x04c 0x4>;
+			};
+
+			socinfo-data2@60 {
+				reg = <0x060 0x4>;
+			};
+
 			thermal_calibration: calib@180 {
 				reg = <0x180 0xc>;
 			};
@@ -1628,6 +1636,7 @@
 			compatible = "mediatek,mt8183-mfgcfg", "syscon";
 			reg = <0 0x13000000 0 0x1000>;
 			#clock-cells = <1>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_MFG_ASYNC>;
 		};
 
 		gpu: gpu@13040000 {
@@ -1658,9 +1667,24 @@
 			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
 				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mmsys_ep_main: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&ovl0_in>;
+				};
+
+				mmsys_ep_ext: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&ovl_2l1_in>;
+				};
+			};
 		};
 
-		mdp3-rdma0@14001000 {
+		dma-controller0@14001000 {
 			compatible = "mediatek,mt8183-mdp3-rdma";
 			reg = <0 0x14001000 0 0x1000>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
@@ -1672,6 +1696,7 @@
 			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
 			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
 				 <&gce 21 CMDQ_THR_PRIO_LOWEST 0>;
+			#dma-cells = <1>;
 		};
 
 		mdp3-rsz0@14003000 {
@@ -1692,7 +1717,7 @@
 			clocks = <&mmsys CLK_MM_MDP_RSZ1>;
 		};
 
-		mdp3-wrot0@14005000 {
+		dma-controller@14005000 {
 			compatible = "mediatek,mt8183-mdp3-wrot";
 			reg = <0 0x14005000 0 0x1000>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
@@ -1701,6 +1726,7 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_MDP_WROT0>;
 			iommus = <&iommu M4U_PORT_MDP_WROT0>;
+			#dma-cells = <1>;
 		};
 
 		mdp3-wdma@14006000 {
@@ -1722,6 +1748,25 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl0_in: endpoint {
+						remote-endpoint = <&mmsys_ep_main>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl0_out: endpoint {
+						remote-endpoint = <&ovl_2l0_in>;
+					};
+				};
+			};
 		};
 
 		ovl_2l0: ovl@14009000 {
@@ -1732,6 +1777,25 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl_2l0_in: endpoint {
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl_2l0_out: endpoint {
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
 		};
 
 		ovl_2l1: ovl@1400a000 {
@@ -1742,6 +1806,25 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl_2l1_in: endpoint {
+						remote-endpoint = <&mmsys_ep_ext>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl_2l1_out: endpoint {
+						remote-endpoint = <&rdma1_in>;
+					};
+				};
+			};
 		};
 
 		rdma0: rdma@1400b000 {
@@ -1753,6 +1836,25 @@
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
 			mediatek,rdma-fifo-size = <5120>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma0_in: endpoint {
+						remote-endpoint = <&ovl_2l0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma0_out: endpoint {
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
 		};
 
 		rdma1: rdma@1400c000 {
@@ -1764,6 +1866,25 @@
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
 			mediatek,rdma-fifo-size = <2048>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma1_in: endpoint {
+						remote-endpoint = <&ovl_2l1_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma1_out: endpoint {
+						remote-endpoint = <&dpi_in>;
+					};
+				};
+			};
 		};
 
 		color0: color@1400e000 {
@@ -1774,6 +1895,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					color0_in: endpoint {
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					color0_out: endpoint {
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
 		};
 
 		ccorr0: ccorr@1400f000 {
@@ -1783,6 +1923,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ccorr0_in: endpoint {
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ccorr0_out: endpoint {
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
 		};
 
 		aal0: aal@14010000 {
@@ -1792,6 +1951,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_AAL0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					aal0_in: endpoint {
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					aal0_out: endpoint {
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
 		};
 
 		gamma0: gamma@14011000 {
@@ -1801,6 +1979,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					gamma0_in: endpoint {
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					gamma0_out: endpoint {
+						remote-endpoint = <&dither0_in>;
+					};
+				};
+			};
 		};
 
 		dither0: dither@14012000 {
@@ -1810,6 +2007,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dither0_in: endpoint {
+						remote-endpoint = <&gamma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dither0_out: endpoint {
+						remote-endpoint = <&dsi_in>;
+					};
+				};
+			};
 		};
 
 		dsi0: dsi@14014000 {
@@ -1824,6 +2040,53 @@
 			resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi_in: endpoint {
+						remote-endpoint = <&dither0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi_out: endpoint { };
+				};
+			};
+		};
+
+		dpi0: dpi@14015000 {
+			compatible = "mediatek,mt8183-dpi";
+			reg = <0 0x14015000 0 0x1000>;
+			interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DPI_IF>,
+				 <&mmsys CLK_MM_DPI_MM>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL>;
+			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dpi_in: endpoint {
+						remote-endpoint = <&rdma1_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dpi_out: endpoint { };
+				};
+			};
 		};
 
 		mutex: mutex@14016000 {
@@ -1898,6 +2161,36 @@
 			#clock-cells = <1>;
 		};
 
+		vcodec_dec: video-codec@16020000 {
+			compatible = "mediatek,mt8183-vcodec-dec";
+			reg = <0 0x16020000 0 0x1000>,		/* VDEC_MISC */
+			      <0 0x16021000 0 0x800>,		/* VDEC_VLD */
+			      <0 0x16021800 0 0x800>,		/* VDEC_TOP */
+			      <0 0x16022000 0 0x1000>,		/* VDEC_MC */
+			      <0 0x16023000 0 0x1000>,		/* VDEC_AVCVLD */
+			      <0 0x16024000 0 0x1000>,		/* VDEC_AVCMV */
+			      <0 0x16025000 0 0x1000>,		/* VDEC_PP */
+			      <0 0x16026800 0 0x800>,		/* VP8_VD */
+			      <0 0x16027000 0 0x800>,		/* VP6_VD */
+			      <0 0x16027800 0 0x800>,		/* VP8_VL */
+			      <0 0x16028400 0 0x400>;		/* VP9_VD */
+			reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+				    "hwd", "hwq", "hwb", "hwg";
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PPWRAP_EXT>;
+			mediatek,scp = <&scp>;
+			mediatek,vdecsys = <&vdecsys>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_VDEC>;
+			clocks = <&vdecsys CLK_VDEC_VDEC>;
+			clock-names = "vdec";
+		};
+
 		larb1: larb@16010000 {
 			compatible = "mediatek,mt8183-smi-larb";
 			reg = <0 0x16010000 0 0x1000>;
@@ -1923,7 +2216,24 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
 		};
 
-		venc_jpg: venc_jpg@17030000 {
+		vcodec_enc: vcodec@17020000 {
+			compatible = "mediatek,mt8183-vcodec-enc";
+			reg = <0 0x17020000 0 0x1000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_VENC_REC>,
+				 <&iommu M4U_PORT_VENC_BSDMA>,
+				 <&iommu M4U_PORT_VENC_RD_COMV>,
+				 <&iommu M4U_PORT_VENC_CUR_LUMA>,
+				 <&iommu M4U_PORT_VENC_CUR_CHROMA>,
+				 <&iommu M4U_PORT_VENC_REF_LUMA>,
+				 <&iommu M4U_PORT_VENC_REF_CHROMA>;
+			mediatek,scp = <&scp>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
+			clocks = <&vencsys CLK_VENC_VENC>;
+			clock-names = "venc_sel";
+		};
+
+		venc_jpg: jpeg-encoder@17030000 {
 			compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc";
 			reg = <0 0x17030000 0 0x1000>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
@@ -2048,61 +2358,129 @@
 			};
 		};
 
-		/* The tzts1 ~ tzts6 don't need to polling */
-		/* The tzts1 ~ tzts6 don't need to thermal throttle */
-
-		tzts1: tzts1 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+		tzts1: soc-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
 			thermal-sensors = <&thermal 1>;
 			sustainable-power = <5000>;
-			trips {};
-			cooling-maps {};
+			trips {
+				soc_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
-		tzts2: tzts2 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+		tzts2: gpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
 			thermal-sensors = <&thermal 2>;
 			sustainable-power = <5000>;
-			trips {};
-			cooling-maps {};
+
+			trips {
+				gpu_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
-		tzts3: tzts3 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+		tzts3: md1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
 			thermal-sensors = <&thermal 3>;
 			sustainable-power = <5000>;
-			trips {};
-			cooling-maps {};
+
+			trips {
+				md1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
-		tzts4: tzts4 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+		tzts4: cpu-little-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
 			thermal-sensors = <&thermal 4>;
 			sustainable-power = <5000>;
-			trips {};
-			cooling-maps {};
+
+			trips {
+				cpul_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpul_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
-		tzts5: tzts5 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+		tzts5: cpu-big-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
 			thermal-sensors = <&thermal 5>;
 			sustainable-power = <5000>;
-			trips {};
-			cooling-maps {};
+
+			trips {
+				cpub_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpub_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
-		tztsABB: tztsABB {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+		tztsABB: tsabb-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
 			thermal-sensors = <&thermal 6>;
 			sustainable-power = <5000>;
-			trips {};
-			cooling-maps {};
+
+			trips {
+				tsabb_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				tsabb_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku0.dts
new file mode 100644
index 000000000000..5d012bc4ff0d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku0.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-chinchou.dtsi"
+
+/ {
+	model = "Google chinchou CZ1104CM2A/CZ1204CM2A";
+	compatible = "google,chinchou-sku0", "google,chinchou-sku2",
+			"google,chinchou-sku4", "google,chinchou-sku5",
+			"google,chinchou", "mediatek,mt8186";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku1.dts
new file mode 100644
index 000000000000..9d6e62af6944
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku1.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-chinchou.dtsi"
+
+/ {
+	model = "Google chinchou CZ1104FM2A/CZ1204FM2A/CZ1104CM2A/CZ1204CM2A";
+	compatible = "google,chinchou-sku1", "google,chinchou-sku3",
+			"google,chinchou-sku6", "google,chinchou-sku7",
+			"google,chinchou-sku17", "google,chinchou-sku20",
+			"google,chinchou-sku22", "google,chinchou-sku23",
+			"google,chinchou", "mediatek,mt8186";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&i2c1 {
+	i2c-scl-internal-delay-ns = <10000>;
+
+	touchscreen: touchscreen@41 {
+		compatible = "ilitek,ili2901";
+		reg = <0x41>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vccio-supply = <&pp1800_tchscr_report_disable>;
+		vcc33-supply = <&pp3300_z2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku16.dts
new file mode 100644
index 000000000000..eb377de1fcde
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku16.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-chinchou.dtsi"
+
+/ {
+	model = "Google chinchou CZ1104FM2A/CZ1204FM2A";
+	compatible = "google,chinchou-sku16", "google,chinchou-sku18",
+			"google,chinchou-sku19", "google,chinchou-sku21",
+			"google,chinchou", "mediatek,mt8186";
+};
+
+&i2c1 {
+	i2c-scl-internal-delay-ns = <10000>;
+
+	touchscreen: touchscreen@41 {
+		compatible = "ilitek,ili2901";
+		reg = <0x41>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vccio-supply = <&pp1800_tchscr_report_disable>;
+		vcc33-supply = <&pp3300_z2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou.dtsi
new file mode 100644
index 000000000000..800792157021
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou.dtsi
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+
+/ {
+	/delete-node/ speaker-codec;
+
+	pp1000_edpbrdg: regulator-pp1000-edpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1000_edpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1000_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 29 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_edpbrdg_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1800_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6366_vio18_reg>;
+	};
+
+	pp3300_edp_dx: regulator-pp3300-edp-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_edp_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 31 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	pp1800_tchscr_report_disable: regulator-pp1800-tchscr-report-disable {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_tchscr_report_disable";
+		pinctrl-names = "default";
+		regulator-boot-on;
+		pinctrl-0 = <&touch_pin_report>;
+		gpio = <&pio 37 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&anx7625_in>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	anx_bridge: anx7625@58 {
+		compatible = "analogix,anx7625";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&anx7625_pins>;
+		enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+		vdd10-supply = <&pp1000_edpbrdg>;
+		vdd18-supply = <&pp1800_edpbrdg_dx>;
+		vdd33-supply = <&pp3300_edp_dx>;
+		analogix,lane0-swing = /bits/ 8 <0x70 0x30>;
+		analogix,lane1-swing = /bits/ 8 <0x70 0x30>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+					data-lanes = <0 1 2 3>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_disp_x>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&anx7625_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/delete-node/ trackpad@15;
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	/delete-node/ codec@1a;
+
+	rt5650: rt5650@1a {
+		compatible = "realtek,rt5650";
+		reg = <0x1a>;
+		avdd-supply = <&mt6366_vio18_reg>;
+		cpvdd-supply = <&mt6366_vio18_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_codec_pins_default>;
+		cbj-sleeve-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&pio>;
+		interrupts = <17 IRQ_TYPE_EDGE_BOTH>;
+		#sound-dai-cells = <0>;
+		realtek,dmic1-data-pin = <2>;
+		realtek,jd-mode = <2>;
+	};
+};
+
+&i2c_tunnel {
+	/delete-node/ sbs-battery@b;
+
+	battery: sbs-battery@f {
+		compatible = "sbs,sbs-battery";
+		reg = <0xf>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
+
+&keyboard_controller {
+	keypad,num-columns = <15>;
+
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)        /* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)        /* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)        /* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)        /* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)        /* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)        /* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)        /* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)        /* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)        /* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)        /* T10 */
+		MATRIX_KEY(0x00, 0x01, 0)        /* T11 */
+		MATRIX_KEY(0x01, 0x05, 0)        /* T12 */
+	>;
+
+	linux,keymap = <
+		CROS_STD_MAIN_KEYMAP
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)           /* T1 */
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)        /* T2 */
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)           /* T3 */
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)          /* T4 */
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)          /* T5 */
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) /* T6 */
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)   /* T7 */
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)           /* T8 */
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)	   /* T9 */
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)	   /* T10 */
+		MATRIX_KEY(0x00, 0x01, KEY_MICMUTE)        /* T11 */
+		MATRIX_KEY(0x01, 0x05, KEY_CONTROLPANEL)   /* T12 */
+		MATRIX_KEY(0x03, 0x05, KEY_PREVIOUSSONG)   /* T13 */
+		MATRIX_KEY(0x00, 0x09, KEY_PLAYPAUSE)	   /* T14 */
+		MATRIX_KEY(0x00, 0x0b, KEY_NEXTSONG)	   /* T15 */
+		MATRIX_KEY(0x03, 0x00, KEY_LEFTMETA)	   /* Search*/
+		MATRIX_KEY(0x01, 0x0e, KEY_LEFTCTRL)	   /* Left Control*/
+		MATRIX_KEY(0x06, 0x0d, KEY_LEFTALT)        /* Left ALT*/
+		MATRIX_KEY(0x03, 0x0e, KEY_RIGHTCTRL)      /* Right Control*/
+		MATRIX_KEY(0x06, 0x0a, KEY_BACKSLASH)      /* BACKSLASH*/
+	>;
+};
+
+&mmc1_pins_default {
+	pins-clk {
+		drive-strength = <8>;
+	};
+
+	pins-cmd-dat {
+		drive-strength = <8>;
+	};
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <8>;
+	};
+
+	pins-cmd-dat {
+		drive-strength = <8>;
+	};
+};
+
+&pen_insert {
+	wakeup-event-action = <EV_ACT_ANY>;
+};
+
+&pio {
+	anx7625_pins: anx7625-pins {
+		pins-int {
+			pinmux = <PINMUX_GPIO9__FUNC_GPIO9>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO98__FUNC_GPIO98>;
+			output-low;
+		};
+
+		pins-power-en {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
+			output-low;
+		};
+	};
+
+	en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
+			output-low;
+		};
+	};
+
+	en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
+			output-low;
+		};
+	};
+
+	en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
+			output-low;
+		};
+	};
+
+	touch_pin_report: pin-report-pins {
+		pins-touch-en {
+			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
+			output-low;
+		};
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8186-mt6366-rt5650-sound";
+	model = "mt8186_rt5650";
+	mediatek,adsp = <&adsp>;
+
+	audio-routing =
+		"Headphone", "HPOL",
+		"Headphone", "HPOR",
+		"IN1P", "Headset Mic",
+		"IN1N", "Headset Mic",
+		"Speakers", "SPOL",
+		"Speakers", "SPOR",
+		"HDMI1", "TX";
+
+	hs-playback-dai-link {
+		codec {
+			sound-dai = <&rt5650>;
+		};
+	};
+
+	hs-capture-dai-link {
+		codec {
+			sound-dai = <&rt5650>;
+		};
+	};
+
+	spk-share-dai-link {
+	};
+
+	spk-hdmi-playback-dai-link {
+		codec {
+			sound-dai = <&it6505dptx>;
+		};
+	};
+};
+
+&touchscreen_pins {
+	/delete-node/ pins-report-sw;
+};
+
+&wifi_enable_pin {
+	pins-wifi-enable {
+		pinmux = <PINMUX_GPIO51__FUNC_GPIO51>;
+	};
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&pio 51 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
new file mode 100644
index 000000000000..72a2a2bff0a9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		i2c4 = &i2c4;
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&ps8640_in>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	edp-bridge@8 {
+		compatible = "parade,ps8640";
+		reg = <0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ps8640_pins>;
+		powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>;
+		vdd12-supply = <&mt6366_vrf12_reg>;
+		vdd33-supply = <&mt6366_vcn33_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				ps8640_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ps8640_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_disp_x>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&ps8640_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-internal-delay-ns = <10000>;
+
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth6915";
+		reg = <0x10>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+		no-reset-on-power-off;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	proximity@28 {
+		compatible = "semtech,sx9324";
+		reg = <0x28>;
+		#io-channel-cells = <1>;
+		interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sar_sensor_pins>;
+		vdd-supply = <&mt6366_vio18_reg>;
+		svdd-supply = <&mt6366_vio18_reg>;
+	};
+};
+
+&pio {
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
+				 <PINMUX_GPIO135__FUNC_SCL4>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	ps8640_pins: ps8640-pins {
+		pins-pwrdn-rst {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
+				 <PINMUX_GPIO98__FUNC_GPIO98>;
+			output-low;
+		};
+	};
+
+	sar_sensor_pins: sar-sensor-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393216.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393216.dts
new file mode 100644
index 000000000000..c9673381ad3b
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393216.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Magneton board";
+	compatible = "google,steelix-sku393219", "google,steelix-sku393216",
+		     "google,steelix", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&i2c1 {
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		vdd-supply = <&pp3300_s3>;
+		post-power-on-delay-ms = <350>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usb_c1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393217.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393217.dts
new file mode 100644
index 000000000000..28e3bbe56421
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393217.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Magneton board";
+	compatible = "google,steelix-sku393220", "google,steelix-sku393217",
+		     "google,steelix", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&i2c1 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		vdd-supply = <&pp3300_s3>;
+		post-power-on-delay-ms = <450>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usb_c1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393218.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393218.dts
new file mode 100644
index 000000000000..332894218f07
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393218.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Magneton board";
+	compatible = "google,steelix-sku393221", "google,steelix-sku393218",
+		     "google,steelix", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usb_c1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku0.dts
new file mode 100644
index 000000000000..986498af4c70
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku0.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-ponyta.dtsi"
+
+/ {
+	model = "Google Ponyta sku0 board";
+	compatible = "google,ponyta-sku0", "google,ponyta", "mediatek,mt8186";
+};
+
+&i2c2 {
+	trackpad@15 {
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku1.dts
new file mode 100644
index 000000000000..ff5eea0ddeb4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku1.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-ponyta.dtsi"
+
+/ {
+	model = "Google Ponyta sku1 board";
+	compatible = "google,ponyta-sku1", "google,ponyta", "mediatek,mt8186";
+};
+
+&i2c2 {
+	trackpad@2c {
+		status = "disabled";
+	};
+};
+
+&usb_c1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta.dtsi
new file mode 100644
index 000000000000..0abf69077089
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T8 */
+		MATRIX_KEY(0x00, 0x01, 0)	/* T9 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T10 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T11 */
+		MATRIX_KEY(0x01, 0x05, 0)	/* T12 */
+	>;
+
+	linux,keymap = <
+		CROS_STD_MAIN_KEYMAP
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x00, 0x04, KEY_PLAYPAUSE)
+		MATRIX_KEY(0x00, 0x01, KEY_MICMUTE)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x01, 0x05, KEY_VOLUMEUP)
+	>;
+};
+
+&mt6366codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
+
+&sound {
+	model = "mt8186_rt1019_rt5682s";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-rusty-sku196608.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-rusty-sku196608.dts
new file mode 100644
index 000000000000..731b0d60228d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-rusty-sku196608.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Rusty board";
+	compatible = "google,steelix-sku196609", "google,steelix-sku196608",
+		     "google,steelix", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts
new file mode 100644
index 000000000000..f721ad4e5c97
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-voltorb.dtsi"
+
+/ {
+	model = "Google squirtle board";
+	compatible = "google,squirtle", "mediatek,mt8186";
+	chassis-type = "convertible";
+};
+
+&i2c1 {
+	touchscreen@10 {
+		compatible = "elan,ekth6915";
+		reg = <0x10>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+		status = "fail-needs-probe";
+	};
+
+	touchscreen@16 {
+		compatible = "elan,ekth8d18", "elan,ekth6a12nay";
+		reg = <0x16>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+		status = "fail-needs-probe";
+	};
+};
+
+&i2c2 {
+	trackpad@68 {
+		compatible = "hid-over-i2c";
+		reg = <0x68>;
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+		status = "fail-needs-probe";
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	/delete-node/ codec@1a;
+
+	rt5650: codec@1a {
+		compatible = "realtek,rt5650";
+		reg = <0x1a>;
+		interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>;
+		avdd-supply = <&mt6366_vio18_reg>;
+		cpvdd-supply = <&mt6366_vio18_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_codec_pins_default>;
+		cbj-sleeve-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+		realtek,dmic1-data-pin = <2>;
+		realtek,jd-mode = <2>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8186-mt6366-rt5650-sound";
+	model = "mt8186_rt5650";
+
+	audio-routing =
+		"Headphone", "HPOL",
+		"Headphone", "HPOR",
+		"HDMI1", "TX";
+
+	hs-playback-dai-link {
+		codec {
+			sound-dai = <&rt5650>;
+		};
+	};
+
+	hs-capture-dai-link {
+		codec {
+			sound-dai = <&rt5650>;
+		};
+	};
+
+	spk-hdmi-playback-dai-link {
+		codec {
+			sound-dai = <&it6505dptx>;
+		};
+	};
+};
+
+&speaker_codec {
+	status = "disabled";
+};
+
+&trackpad_steelix {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku0.dts
new file mode 100644
index 000000000000..23e194579bf2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku0.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-starmie.dtsi"
+
+/ {
+	model = "Google Starmie sku0 board";
+	compatible = "google,starmie-sku0", "google,starmie-sku2",
+		     "google,starmie-sku3", "google,starmie",
+		     "mediatek,mt8186";
+};
+
+&panel {
+	compatible = "starry,ili9882t";
+};
+
+&i2c1 {
+	touchscreen: touchscreen@41 {
+		compatible = "ilitek,ili9882t";
+		reg = <0x41>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		panel = <&panel>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vccio-supply = <&mt6366_vio18_reg>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku1.dts
new file mode 100644
index 000000000000..214b972c9357
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku1.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-starmie.dtsi"
+
+/ {
+	model = "Google Starmie sku1 board";
+	compatible = "google,starmie-sku1", "google,starmie-sku4",
+		     "google,starmie", "mediatek,mt8186";
+};
+
+&panel {
+	compatible = "starry,himax83102-j02", "himax,hx83102";
+};
+
+&i2c1 {
+	touchscreen_himax: touchscreen@4f {
+		compatible = "hid-over-i2c";
+		reg = <0x4f>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		vdd-supply = <&mt6366_vio18_reg>;
+		panel = <&panel>;
+		post-power-on-delay-ms = <450>;
+		hid-descr-addr = <0x0001>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi
new file mode 100644
index 000000000000..a8e79c2791ba
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+
+/ {
+	en_pp6000_mipi_disp_150ma: en-pp6000-mipi-disp-150ma {
+		compatible = "regulator-fixed";
+		regulator-name = "en_pp6000_mipi_disp_150ma";
+		gpio = <&pio 154 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp6000_mipi_disp_150ma_fixed_pins>;
+	};
+
+	/*
+	 * Starmie does not have 3.3V display regulator. It is replaced
+	 * with 6V module for enabling panel, re-using eDP GPIOs.
+	 */
+	/delete-node/ pp3300_disp_x;
+	en_pp6000_mipi_disp: en-regulator-pp6000-mipi-disp {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_fixed_pins>;
+		gpios = <&pio 153 GPIO_ACTIVE_HIGH>;
+		regulator-name = "en_pp6000_mipi_disp";
+		enable-active-high;
+		regulator-enable-ramp-delay = <3000>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	tboard_thermistor1: thermal-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 1492
+						0 1413
+						5000 1324
+						10000 1227
+						15000 1121
+						20000 1017
+						25000 900
+						30000 797
+						35000 698
+						40000 606
+						45000 522
+						50000 449
+						55000 383
+						60000 327
+						65000 278
+						70000 236
+						75000 201
+						80000 171
+						85000 145
+						90000 163
+						95000 124
+						100000 91
+						105000 78
+						110000 67
+						115000 58
+						120000 50
+						125000 44>;
+	};
+
+	tboard_thermistor2: thermal-sensor2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 1492
+						0 1413
+						5000 1324
+						10000 1227
+						15000 1121
+						20000 1017
+						25000 900
+						30000 797
+						35000 698
+						40000 606
+						45000 522
+						50000 449
+						55000 383
+						60000 327
+						65000 278
+						70000 236
+						75000 201
+						80000 171
+						85000 145
+						90000 163
+						95000 124
+						100000 91
+						105000 78
+						110000 67
+						115000 58
+						120000 50
+						125000 44>;
+	};
+};
+
+/*
+ * Starmie does not have EC keyboard. Remove default keyboard controller
+ * and replace it with the driver for side switches.
+ */
+/delete-node/ &keyboard_controller;
+
+&cros_ec {
+	cbas: cbas {
+		compatible = "google,cros-cbas";
+	};
+
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 98 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+		avdd-supply = <&en_pp6000_mipi_disp>;
+		avee-supply = <&en_pp6000_mipi_disp_150ma>;
+		pp1800-supply = <&mt6366_vio18_reg>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+};
+
+&mmc1_pins_default {
+	pins-clk {
+		drive-strength = <8>;
+	};
+
+	pins-cmd-dat {
+		drive-strength = <8>;
+	};
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <8>;
+	};
+
+	pins-cmd-dat {
+		drive-strength = <8>;
+	};
+};
+
+&pen_insert {
+	wakeup-event-action = <EV_ACT_ANY>;
+};
+
+&pio {
+	/* 185 lines */
+	gpio-line-names = "TP",
+			  "TP",
+			  "TP",
+			  "I2S0_HP_DI",
+			  "I2S3_DP_SPKR_DO",
+			  "SAR_INT_ODL",
+			  "BT_WAKE_AP_ODL",
+			  "WIFI_INT_ODL",
+			  "DPBRDG_INT_ODL",
+			  "NC",
+			  "EC_AP_HPD_OD",
+			  "NC",
+			  "TCHSCR_INT_1V8_ODL",
+			  "EC_AP_INT_ODL",
+			  "EC_IN_RW_ODL",
+			  "GSC_AP_INT_ODL",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+			   * call it AP_WP_ODL.
+			   */
+			  "AP_FLASH_WP_L",
+			  "HP_INT_ODL",
+			  "PEN_EJECT_OD",
+			  "NC",
+			  "NC",
+			  "UCAM_SEN_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "I2S2_DP_SPK_MCK",
+			  "I2S2_DP_SPKR_BCK",
+			  "I2S2_DP_SPKR_LRCK",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "UART_GSC_TX_AP_RX",
+			  "UART_AP_TX_GSC_RX",
+			  "UART_DBGCON_TX_ADSP_RX",
+			  "UART_ADSP_TX_DBGCON_RX",
+			  "NC",
+			  "TCHSCR_REPORT_DISABLE",
+			  "NC",
+			  "EN_PP1800_DPBRDG",
+			  "SPI_AP_CLK_EC",
+			  "SPI_AP_CS_EC_L",
+			  "SPI_AP_DO_EC_DI",
+			  "SPI_AP_DI_EC_DO",
+			  "SPI_AP_CLK_GSC",
+			  "SPI_AP_CS_GSC_L",
+			  "SPI_AP_DO_GSC_DI",
+			  "SPI_AP_DI_GSC_DO",
+			  "UART_DBGCON_TX_SCP_RX",
+			  "UART_SCP_TX_DBGCON_RX",
+			  "EN_PP1200_CAM_X",
+			  "WLAN_MODULE_RST_L",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "I2S1_HP_DO",
+			  "I2S1_HP_BCK",
+			  "I2S1_HP_LRCK",
+			  "I2S1_HP_MCK",
+			  "TCHSCR_RST_1V8_L",
+			  "SPI_AP_CLK_ROM",
+			  "SPI_AP_CS_ROM_L",
+			  "SPI_AP_DO_ROM_DI",
+			  "SPI_AP_DI_ROM_DO",
+			  "NC",
+			  "NC",
+			  "EMMC_STRB",
+			  "EMMC_CLK",
+			  "EMMC_CMD",
+			  "EMMC_RST_L",
+			  "EMMC_DATA0",
+			  "EMMC_DATA1",
+			  "EMMC_DATA2",
+			  "EMMC_DATA3",
+			  "EMMC_DATA4",
+			  "EMMC_DATA5",
+			  "EMMC_DATA6",
+			  "EMMC_DATA7",
+			  "AP_KPCOL0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "TP",
+			  "SDIO_CLK",
+			  "SDIO_CMD",
+			  "SDIO_DATA0",
+			  "SDIO_DATA1",
+			  "SDIO_DATA2",
+			  "SDIO_DATA3",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MIPI_BL_PWM_1V8",
+			  "DISP_RST_1V8_L",
+			  "MIPI_DPI_CLK",
+			  "MIPI_DPI_VSYNC",
+			  "MIPI_DPI_HSYNC",
+			  "MIPI_DPI_DE",
+			  "MIPI_DPI_D0",
+			  "MIPI_DPI_D1",
+			  "MIPI_DPI_D2",
+			  "MIPI_DPI_D3",
+			  "MIPI_DPI_D4",
+			  "MIPI_DPI_D5",
+			  "MIPI_DPI_D6",
+			  "MIPI_DPI_DA7",
+			  "MIPI_DPI_D8",
+			  "MIPI_DPI_D9",
+			  "MIPI_DPI_D10",
+			  "MIPI_DPI_D11",
+			  "PCM_BT_CLK",
+			  "PCM_BT_SYNC",
+			  "PCM_BT_DI",
+			  "PCM_BT_DO",
+			  "JTAG_TMS_TP",
+			  "JTAG_TCK_TP",
+			  "JTAG_TDI_TP",
+			  "JTAG_TDO_TP",
+			  "JTAG_TRSTN_TP",
+			  "NC",
+			  "NC",
+			  "UCAM_DET_ODL",
+			  "NC",
+			  "NC",
+			  "AP_I2C_TCHSCR_SCL_1V8",
+			  "AP_I2C_TCHSCR_SDA_1V8",
+			  "NC",
+			  "NC",
+			  "AP_I2C_DPBRDG_SCL_1V8",
+			  "AP_I2C_DPBRDG_SDA_1V8",
+			  "NC",
+			  "NC",
+			  "AP_I2C_AUD_SCL_1V8",
+			  "AP_I2C_AUD_SDA_1V8",
+			  "AP_I2C_DISP_SCL_1V8",
+			  "AP_I2C_DISP_SDA_1V8",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SCP_I2C_SENSOR_SCL_1V8",
+			  "SCP_I2C_SENSOR_SDA_1V8",
+			  "AP_EC_WARM_RST_REQ",
+			  "AP_XHCI_INIT_DONE",
+			  "USB3_HUB_RST_L",
+			  "EN_SPKR",
+			  "BEEP_ON",
+			  "AP_DISP_BKLTEN",
+			  "EN_PP6000_MIPI_DISP",
+			  "EN_PP6000_MIPI_DISP_150MA",
+			  "BT_KILL_1V8_L",
+			  "WIFI_KILL_1V8_L",
+			  "PWRAP_SPI0_CSN",
+			  "PWRAP_SPI0_CK",
+			  "PWRAP_SPI0_MO",
+			  "PWRAP_SPI0_MI",
+			  "SRCLKENA0",
+			  "SRCLKENA1",
+			  "SCP_VREQ_VAO",
+			  "AP_RTC_CLK32K",
+			  "AP_PMIC_WDTRST_L",
+			  "AUD_CLK_MOSI",
+			  "AUD_SYNC_MOSI",
+			  "AUD_DAT_MOSI0",
+			  "AUD_DAT_MOSI1",
+			  "AUD_CLK_MISO",
+			  "AUD_SYNC_MISO",
+			  "AUD_DAT_MISO0",
+			  "AUD_DAT_MISO1",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DPBRDG_RST_L",
+			  "LTE_W_DISABLE_L",
+			  "LTE_SAR_DETECT_L",
+			  "EN_PP3300_LTE_X",
+			  "LTE_PWR_OFF_L",
+			  "LTE_RESET_L",
+			  "TP",
+			  "TP";
+
+	en_pp6000_mipi_disp_150ma_fixed_pins: en_pp6000-mipi-disp-150ma-fixed-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO154__FUNC_GPIO154>;
+			output-low;
+		};
+	};
+
+	panel_default_pins: panel-default-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO98__FUNC_GPIO98>;
+			output-low;
+		};
+	};
+};
+
+&usb_c1 {
+	status = "disabled";
+};
+
+&thermal_zones {
+	tboard1-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor1>;
+	};
+
+	tboard2-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor2>;
+	};
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&pio 51 1>;
+};
+
+/*
+ * Battery on Starmie is using a different address than default.
+ * Remove old node to reuse "battery" alias.
+ */
+/delete-node/ &battery;
+&i2c_tunnel {
+	battery: sbs-battery@f {
+		compatible = "sbs,sbs-battery";
+		reg = <0xf>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
new file mode 100644
index 000000000000..eae17bca8585
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Steelix board";
+	compatible = "google,steelix-sku131072", "google,steelix",
+		     "mediatek,mt8186";
+	chassis-type = "convertible";
+};
+
+&mt6366codec {
+	mediatek,dmic-mode = <0>; /* two-wire */
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
new file mode 100644
index 000000000000..a55375b95d0d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Steelix board";
+	compatible = "google,steelix-sku131073", "google,steelix",
+		     "mediatek,mt8186";
+	chassis-type = "convertible";
+};
+
+&mt6366codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
new file mode 100644
index 000000000000..8a196dc9a96b
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/{
+	pp1000_edpbrdg: regulator-pp1000-edpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1000_edpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1000_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 29 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_edpbrdg_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1800_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6366_vio18_reg>;
+	};
+
+	pp3300_edp_dx: regulator-pp3300-edp-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_edp_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 31 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&anx7625_in>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	anx_bridge: anx7625@58 {
+		compatible = "analogix,anx7625";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&anx7625_pins>;
+		enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+		vdd10-supply = <&pp1000_edpbrdg>;
+		vdd18-supply = <&pp1800_edpbrdg_dx>;
+		vdd33-supply = <&pp3300_edp_dx>;
+		analogix,lane0-swing = /bits/ 8 <0x70 0x30>;
+		analogix,lane1-swing = /bits/ 8 <0x70 0x30>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+					data-lanes = <0 1 2 3>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_disp_x>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&anx7625_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	touchscreen: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&pp3300_s3>;
+		goodix,no-reset-during-suspend;
+	};
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <22000>;
+
+	/* second source component */
+	trackpad_steelix: trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+		status = "fail-needs-probe";
+	};
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x01, 0x04, KEY_MICMUTE)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&pio {
+	anx7625_pins: anx7625-pins {
+		pins-int {
+			pinmux = <PINMUX_GPIO9__FUNC_GPIO9>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO98__FUNC_GPIO98>;
+			output-low;
+		};
+
+		pins-power-en {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
+			output-low;
+		};
+	};
+
+	en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
+			output-low;
+		};
+	};
+
+	en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
+			output-low;
+		};
+	};
+
+	en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
+			output-low;
+		};
+	};
+};
+
+&trackpad {
+	status = "fail-needs-probe";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
index 0039158c9e60..9bb64353ca65 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
@@ -2,29 +2,24 @@
 /*
  * Copyright 2022 Google LLC
  */
+
 /dts-v1/;
-#include "mt8192-asurada.dtsi"
-#include <dt-bindings/leds/common.h>
+#include "mt8186-corsola-krabby.dtsi"
 
 / {
-	model = "Google Spherion (rev4)";
-	compatible = "google,spherion-rev4", "google,spherion",
-		     "mediatek,mt8192";
-
-	pwmleds {
-		compatible = "pwm-leds";
+	model = "Google Tentacool board";
+	compatible = "google,tentacruel-sku327681", "google,tentacruel", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
 
-		led {
-			function = LED_FUNCTION_KBD_BACKLIGHT;
-			color = <LED_COLOR_ID_WHITE>;
-			pwms = <&cros_ec_pwm 0>;
-			max-brightness = <1023>;
-		};
-	};
+/* Tentacool omits the pen. */
+&gpio_keys {
+	status = "disabled";
 };
 
-&cros_ec_pwm {
-	status = "okay";
+/* Tentacool omits the touchscreen; nothing else is on i2c1. */
+&i2c1 {
+	status = "disabled";
 };
 
 &keyboard_controller {
@@ -40,10 +35,11 @@
 		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
 		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
 	>;
+
 	linux,keymap = <
 		MATRIX_KEY(0x00, 0x02, KEY_BACK)
 		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
-		MATRIX_KEY(0x02, 0x02, KEY_FULL_SCREEN)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
 		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
 		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
 		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
@@ -51,27 +47,11 @@
 		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
 		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
 		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
-
 		CROS_STD_MAIN_KEYMAP
 	>;
 };
 
-&rt5682 {
-	compatible = "realtek,rt5682s";
-};
-
-&sound {
-	compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682s";
-
-	speaker-codecs {
-		sound-dai = <&rt1015p>;
-	};
-
-	headset-codec {
-		sound-dai = <&rt5682 0>;
-	};
-};
-
+/* Tentacool omits the touchscreen. */
 &touchscreen {
-	compatible = "elan,ekth3500";
+	status = "disabled";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
new file mode 100644
index 000000000000..4dbf2cb73a81
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+#include "mt8186-corsola-tentacool-sku327681.dts"
+
+/ {
+	compatible = "google,tentacruel-sku327683", "google,tentacruel", "mediatek,mt8186";
+};
+
+/* This variant replaces only the trackpad controller. */
+&i2c2 {
+	/delete-node/ trackpad@15;
+
+	trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
index 3127ee5f6172..24d9ede63eaa 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
@@ -2,13 +2,16 @@
 /*
  * Copyright 2022 Google LLC
  */
+
 /dts-v1/;
-#include "mt8192-asurada.dtsi"
+#include "mt8186-corsola-krabby.dtsi"
 
 / {
-	model = "Google Hayato rev5";
-	compatible = "google,hayato-rev5-sku2", "google,hayato-sku2",
-		     "google,hayato", "mediatek,mt8192";
+	model = "Google Tentacruel board";
+	compatible = "google,tentacruel-sku262147", "google,tentacruel-sku262146",
+		     "google,tentacruel-sku262145", "google,tentacruel-sku262144",
+		     "google,tentacruel", "mediatek,mt8186";
+	chassis-type = "convertible";
 };
 
 &keyboard_controller {
@@ -24,41 +27,22 @@
 		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
 		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
 	>;
+
 	linux,keymap = <
 		MATRIX_KEY(0x00, 0x02, KEY_BACK)
-		MATRIX_KEY(0x03, 0x02, KEY_FORWARD)
-		MATRIX_KEY(0x02, 0x02, KEY_REFRESH)
-		MATRIX_KEY(0x01, 0x02, KEY_FULL_SCREEN)
-		MATRIX_KEY(0x03, 0x04, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
 		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
 		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
 		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
 		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
 		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
-
 		CROS_STD_MAIN_KEYMAP
 	>;
 };
 
-&rt5682 {
-	compatible = "realtek,rt5682s";
-};
-
-&sound {
-	compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682s";
-
-	speaker-codecs {
-		sound-dai = <&rt1015p>;
-	};
-
-	headset-codec {
-		sound-dai = <&rt5682 0>;
-	};
-};
-
 &touchscreen {
-	compatible = "hid-over-i2c";
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
-	vdd-supply = <&pp3300_u>;
+	compatible = "elan,ekth6a12nay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
new file mode 100644
index 000000000000..ee5bc2cd9e9f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+#include "mt8186-corsola-tentacruel-sku262144.dts"
+
+/ {
+	compatible = "google,tentacruel-sku262151", "google,tentacruel-sku262150",
+		     "google,tentacruel-sku262149", "google,tentacruel-sku262148",
+		     "google,tentacruel", "mediatek,mt8186";
+};
+
+/* This variant replaces only the trackpad controller. */
+&i2c2 {
+	/delete-node/ trackpad@15;
+
+	trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dts
new file mode 100644
index 000000000000..cc805408a8b7
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-voltorb.dtsi"
+
+/ {
+	model = "Google Voltorb board";
+	compatible = "google,voltorb", "mediatek,mt8186";
+};
+
+&i2c1 {
+	touchscreen@10 {
+		compatible = "elan,ekth6915";
+		reg = <0x10>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi
new file mode 100644
index 000000000000..b495a241b443
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	chassis-type = "laptop";
+};
+
+&cpu6 {
+	proc-supply = <&mt6319_buck1>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6319_buck1>;
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&keyboard_controller {
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&mt6366_vproc11_reg {
+	status = "disabled";
+};
+
+&cluster1_opp_14 {
+	opp-hz = /bits/ 64 <2050000000>;
+	opp-microvolt = <1118750>;
+};
+
+&cluster1_opp_15 {
+	opp-hz = /bits/ 64 <2200000000>;
+};
+
+&sound {
+	compatible = "mediatek,mt8186-mt6366-rt5682s-max98360-sound";
+};
+
+&speaker_codec {
+	compatible = "maxim,max98360a";
+	sdmode-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+	/delete-property/ sdb-gpios;
+};
+
+&spmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spmi_pins>;
+	#address-cells = <2>;
+	#size-cells = <0>;
+	status = "okay";
+
+	pmic@6 {
+		compatible = "mediatek,mt6319-regulator", "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6319_buck1: vbuck1 {
+					regulator-name = "ppvar_dvdd_proc_bc_mt6319";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1193750>;
+					regulator-enable-ramp-delay = <256>;
+					regulator-allowed-modes = <0 1 2>;
+					regulator-always-on;
+			};
+		};
+	};
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
new file mode 100644
index 000000000000..ff20376a44d7
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
@@ -0,0 +1,1725 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8186.dtsi"
+#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* The size should be filled in by the bootloader. */
+		reg = <0 0x40000000 0 0>;
+	};
+
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 500000>;
+		power-supply = <&ppvar_sys>;
+		enable-gpios = <&pio 152 0>;
+		brightness-levels = <0 1023>;
+		num-interpolated-steps = <1023>;
+		default-brightness-level = <576>;
+	};
+
+	bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
+	};
+
+	dmic-codec {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_eject>;
+
+		pen_insert: pen-insert-switch {
+			label = "Pen Insert";
+			/* Insert = low, eject = high */
+			gpios = <&pio 18 GPIO_ACTIVE_LOW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+			linux,code = <SW_PEN_INSERTED>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	pp1800_dpbrdg_dx: regulator-pp1800-dpbrdg-dx {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1800_dpbrdg>;
+		gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
+		regulator-name = "pp1800_dpbrdg_dx";
+		enable-active-high;
+		vin-supply = <&mt6366_vio18_reg>;
+	};
+
+	pp3300_disp_x: regulator-pp3300-disp-x {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_fixed_pins>;
+		gpios = <&pio 153 GPIO_ACTIVE_HIGH>;
+		regulator-name = "pp3300_disp_x";
+		enable-active-high;
+		regulator-boot-on;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	/* system wide LDO 3.3V power rail */
+	pp3300_z5: regulator-pp3300-ldo-z5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_ldo_z5";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* separately switched 3.3V power rail */
+	pp3300_s3: regulator-pp3300-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_s3";
+		/* automatically sequenced by PMIC EXT_PMIC_EN2 */
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	/* system wide 3.3V power rail */
+	pp3300_z2: regulator-pp3300-z2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_z2";
+		/* EN pin tied to pp4200_z2, which is controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide 4.2V power rail */
+	pp4200_z2: regulator-pp4200-z2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp4200_z2";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide switching 5.0V power rail */
+	pp5000_z2: regulator-pp5000-z2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_z2";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide semi-regulated power rail from battery or USB */
+	ppvar_sys: regulator-ppvar-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		afe_dma_mem: audio-dma-pool {
+			compatible = "shared-dma-pool";
+			size = <0 0x100000>;
+			alignment = <0 0x10>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0x1000000>;
+			no-map;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x10a0000>;
+			no-map;
+		};
+	};
+
+	sound: sound {
+		compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
+		pinctrl-names = "aud_clk_mosi_off",
+				"aud_clk_mosi_on",
+				"aud_clk_miso_off",
+				"aud_clk_miso_on",
+				"aud_dat_miso_off",
+				"aud_dat_miso_on",
+				"aud_dat_mosi_off",
+				"aud_dat_mosi_on",
+				"aud_gpio_i2s0_off",
+				"aud_gpio_i2s0_on",
+				"aud_gpio_i2s1_off",
+				"aud_gpio_i2s1_on",
+				"aud_gpio_i2s2_off",
+				"aud_gpio_i2s2_on",
+				"aud_gpio_i2s3_off",
+				"aud_gpio_i2s3_on",
+				"aud_gpio_pcm_off",
+				"aud_gpio_pcm_on",
+				"aud_gpio_dmic_sec";
+		pinctrl-0 = <&aud_clk_mosi_off>;
+		pinctrl-1 = <&aud_clk_mosi_on>;
+		pinctrl-2 = <&aud_clk_miso_off>;
+		pinctrl-3 = <&aud_clk_miso_on>;
+		pinctrl-4 = <&aud_dat_miso_off>;
+		pinctrl-5 = <&aud_dat_miso_on>;
+		pinctrl-6 = <&aud_dat_mosi_off>;
+		pinctrl-7 = <&aud_dat_mosi_on>;
+		pinctrl-8 = <&aud_gpio_i2s0_off>;
+		pinctrl-9 = <&aud_gpio_i2s0_on>;
+		pinctrl-10 = <&aud_gpio_i2s1_off>;
+		pinctrl-11 = <&aud_gpio_i2s1_on>;
+		pinctrl-12 = <&aud_gpio_i2s2_off>;
+		pinctrl-13 = <&aud_gpio_i2s2_on>;
+		pinctrl-14 = <&aud_gpio_i2s3_off>;
+		pinctrl-15 = <&aud_gpio_i2s3_on>;
+		pinctrl-16 = <&aud_gpio_pcm_off>;
+		pinctrl-17 = <&aud_gpio_pcm_on>;
+		pinctrl-18 = <&aud_gpio_dmic_sec>;
+		mediatek,adsp = <&adsp>;
+		mediatek,platform = <&afe>;
+
+		audio-routing =
+			"Headphone", "HPOL",
+			"Headphone", "HPOR",
+			"IN1P", "Headset Mic",
+			"Speakers", "Speaker",
+			"HDMI1", "TX";
+
+		hs-playback-dai-link {
+			link-name = "I2S0";
+			dai-format = "i2s";
+			mediatek,clk-provider = "cpu";
+			codec {
+				sound-dai = <&rt5682s 0>;
+			};
+		};
+
+		hs-capture-dai-link {
+			link-name = "I2S1";
+			dai-format = "i2s";
+			mediatek,clk-provider = "cpu";
+			codec {
+				sound-dai = <&rt5682s 0>;
+			};
+		};
+
+		spk-share-dai-link {
+			link-name = "I2S2";
+			mediatek,clk-provider = "cpu";
+		};
+
+		spk-hdmi-playback-dai-link {
+			link-name = "I2S3";
+			dai-format = "i2s";
+			mediatek,clk-provider = "cpu";
+			/* RT1019P and IT6505 connected to the same I2S line */
+			codec {
+				sound-dai = <&it6505dptx>, <&speaker_codec>;
+			};
+		};
+	};
+
+	speaker_codec: speaker-codec {
+		compatible = "realtek,rt1019p";
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_codec_pins_default>;
+		#sound-dai-cells = <0>;
+		sdb-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb_p1_vbus: regulator-usb-p1-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&pio 148 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		vin-supply = <&pp5000_z2>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_pin>;
+		post-power-on-delay-ms = <50>;
+		reset-gpios = <&pio 54 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi_wakeup: wifi-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_wakeup_pin>;
+
+		wowlan-event {
+			label = "Wake on WiFi";
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
+&cci {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu0 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu4 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu5 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu6 {
+	proc-supply = <&mt6366_vproc11_reg>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6366_vproc11_reg>;
+};
+
+&dpi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_pins_default>;
+	pinctrl-1 = <&dpi_pins_sleep>;
+	/* TODO Re-enable after DP to Type-C port muxing can be described */
+	status = "disabled";
+};
+
+&dpi_out {
+	remote-endpoint = <&it6505_in>;
+};
+
+&dsi0 {
+	status = "okay";
+};
+
+&gic {
+	mediatek,broken-save-restore-fw;
+};
+
+&gpu {
+	mali-supply = <&mt6366_vgpu_reg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <8000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <10000>;
+	status = "okay";
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
+		vcc-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	it6505dptx: dp-bridge@5c {
+		compatible = "ite,it6505";
+		reg = <0x5c>;
+		interrupts-extended = <&pio 8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&it6505_pins>;
+		#sound-dai-cells = <0>;
+		ovdd-supply = <&mt6366_vsim2_reg>;
+		pwr18-supply = <&pp1800_dpbrdg_dx>;
+		reset-gpios = <&pio 177 GPIO_ACTIVE_LOW>;
+		extcon = <&usbc_extcon>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				it6505_in: endpoint {
+					link-frequencies = /bits/ 64 <150000000>;
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	status = "okay";
+
+	rt5682s: codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>;
+		#sound-dai-cells = <1>;
+		AVDD-supply = <&mt6366_vio18_reg>;
+		DBVDD-supply = <&mt6366_vio18_reg>;
+		LDO1-IN-supply = <&mt6366_vio18_reg>;
+		MICVDD-supply = <&pp3300_z2>;
+		realtek,jd-src = <1>;
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6366_vsram_gpu_reg>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6366_vgpu_reg>;
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	no-sd;
+	no-sdio;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x11814>;
+	mediatek,hs400-ds-dly3 = <0x14>;
+	vmmc-supply = <&mt6366_vemc_reg>;
+	vqmmc-supply = <&mt6366_vio18_reg>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs", "state_eint";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	pinctrl-2 = <&mmc1_pins_eint>;
+	/delete-property/ interrupts;
+	interrupt-names = "msdc", "sdio_wakeup";
+	interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
+			      <&pio 87 IRQ_TYPE_LEVEL_LOW>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	keep-power-in-suspend;
+	wakeup-source;
+	cap-sdio-irq;
+	no-mmc;
+	no-sd;
+	vmmc-supply = <&pp3300_s3>;
+	vqmmc-supply = <&mt6366_vio18_reg>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+
+	bluetooth@2 {
+		compatible = "mediatek,mt7921s-bluetooth";
+		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_reset>;
+		reset-gpios = <&pio 155 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&nor_flash {
+	assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D7_D4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <39000000>;
+	};
+};
+
+&pio {
+	/* 185 lines */
+	gpio-line-names = "TP",
+			  "TP",
+			  "TP",
+			  "I2S0_HP_DI",
+			  "I2S3_DP_SPKR_DO",
+			  "SAR_INT_ODL",
+			  "BT_WAKE_AP_ODL",
+			  "WIFI_INT_ODL",
+			  "DPBRDG_INT_ODL",
+			  "EDPBRDG_INT_ODL",
+			  "EC_AP_HPD_OD",
+			  "TCHPAD_INT_ODL",
+			  "TCHSCR_INT_1V8_ODL",
+			  "EC_AP_INT_ODL",
+			  "EC_IN_RW_ODL",
+			  "GSC_AP_INT_ODL",
+			  /* AP_FLASH_WP_L is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
+			  "AP_FLASH_WP_L",
+			  "HP_INT_ODL",
+			  "PEN_EJECT_OD",
+			  "WCAM_PWDN_L",
+			  "WCAM_RST_L",
+			  "UCAM_SEN_EN",
+			  "UCAM_RST_L",
+			  "LTE_RESET_L",
+			  "LTE_SAR_DETECT_L",
+			  "I2S2_DP_SPK_MCK",
+			  "I2S2_DP_SPKR_BCK",
+			  "I2S2_DP_SPKR_LRCK",
+			  "I2S2_DP_SPKR_DI (TP)",
+			  "EN_PP1000_EDPBRDG",
+			  "EN_PP1800_EDPBRDG",
+			  "EN_PP3300_EDPBRDG",
+			  "UART_GSC_TX_AP_RX",
+			  "UART_AP_TX_GSC_RX",
+			  "UART_DBGCON_TX_ADSP_RX",
+			  "UART_ADSP_TX_DBGCON_RX",
+			  "EN_PP1000_DPBRDG",
+			  "TCHSCR_REPORT_DISABLE",
+			  "EN_PP3300_DPBRDG",
+			  "EN_PP1800_DPBRDG",
+			  "SPI_AP_CLK_EC",
+			  "SPI_AP_CS_EC_L",
+			  "SPI_AP_DO_EC_DI",
+			  "SPI_AP_DI_EC_DO",
+			  "SPI_AP_CLK_GSC",
+			  "SPI_AP_CS_GSC_L",
+			  "SPI_AP_DO_GSC_DI",
+			  "SPI_AP_DI_GSC_DO",
+			  "UART_DBGCON_TX_SCP_RX",
+			  "UART_SCP_TX_DBGCON_RX",
+			  "EN_PP1200_CAM_X",
+			  "EN_PP2800A_VCM_X",
+			  "EN_PP2800A_UCAM_X",
+			  "EN_PP2800A_WCAM_X",
+			  "WLAN_MODULE_RST_L",
+			  "EN_PP1200_UCAM_X",
+			  "I2S1_HP_DO",
+			  "I2S1_HP_BCK",
+			  "I2S1_HP_LRCK",
+			  "I2S1_HP_MCK",
+			  "TCHSCR_RST_1V8_L",
+			  "SPI_AP_CLK_ROM",
+			  "SPI_AP_CS_ROM_L",
+			  "SPI_AP_DO_ROM_DI",
+			  "SPI_AP_DI_ROM_DO",
+			  "NC",
+			  "NC",
+			  "EMMC_STRB",
+			  "EMMC_CLK",
+			  "EMMC_CMD",
+			  "EMMC_RST_L",
+			  "EMMC_DATA0",
+			  "EMMC_DATA1",
+			  "EMMC_DATA2",
+			  "EMMC_DATA3",
+			  "EMMC_DATA4",
+			  "EMMC_DATA5",
+			  "EMMC_DATA6",
+			  "EMMC_DATA7",
+			  "AP_KPCOL0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "TP",
+			  "SDIO_CLK",
+			  "SDIO_CMD",
+			  "SDIO_DATA0",
+			  "SDIO_DATA1",
+			  "SDIO_DATA2",
+			  "SDIO_DATA3",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "EDPBRDG_PWREN",
+			  "BL_PWM_1V8",
+			  "EDPBRDG_RST_L",
+			  "MIPI_DPI_CLK",
+			  "MIPI_DPI_VSYNC",
+			  "MIPI_DPI_HSYNC",
+			  "MIPI_DPI_DE",
+			  "MIPI_DPI_D0",
+			  "MIPI_DPI_D1",
+			  "MIPI_DPI_D2",
+			  "MIPI_DPI_D3",
+			  "MIPI_DPI_D4",
+			  "MIPI_DPI_D5",
+			  "MIPI_DPI_D6",
+			  "MIPI_DPI_DA7",
+			  "MIPI_DPI_D8",
+			  "MIPI_DPI_D9",
+			  "MIPI_DPI_D10",
+			  "MIPI_DPI_D11",
+			  "PCM_BT_CLK",
+			  "PCM_BT_SYNC",
+			  "PCM_BT_DI",
+			  "PCM_BT_DO",
+			  "JTAG_TMS_TP",
+			  "JTAG_TCK_TP",
+			  "JTAG_TDI_TP",
+			  "JTAG_TDO_TP",
+			  "JTAG_TRSTN_TP",
+			  "CLK_24M_WCAM",
+			  "CLK_24M_UCAM",
+			  "UCAM_DET_ODL",
+			  "AP_I2C_EDPBRDG_SCL_1V8",
+			  "AP_I2C_EDPBRDG_SDA_1V8",
+			  "AP_I2C_TCHSCR_SCL_1V8",
+			  "AP_I2C_TCHSCR_SDA_1V8",
+			  "AP_I2C_TCHPAD_SCL_1V8",
+			  "AP_I2C_TCHPAD_SDA_1V8",
+			  "AP_I2C_DPBRDG_SCL_1V8",
+			  "AP_I2C_DPBRDG_SDA_1V8",
+			  "AP_I2C_WLAN_SCL_1V8",
+			  "AP_I2C_WLAN_SDA_1V8",
+			  "AP_I2C_AUD_SCL_1V8",
+			  "AP_I2C_AUD_SDA_1V8",
+			  "AP_I2C_TPM_SCL_1V8",
+			  "AP_I2C_UCAM_SDA_1V8",
+			  "AP_I2C_UCAM_SCL_1V8",
+			  "AP_I2C_UCAM_SDA_1V8",
+			  "AP_I2C_WCAM_SCL_1V8",
+			  "AP_I2C_WCAM_SDA_1V8",
+			  "SCP_I2C_SENSOR_SCL_1V8",
+			  "SCP_I2C_SENSOR_SDA_1V8",
+			  "AP_EC_WARM_RST_REQ",
+			  "AP_XHCI_INIT_DONE",
+			  "USB3_HUB_RST_L",
+			  "EN_SPKR",
+			  "BEEP_ON",
+			  "AP_EDP_BKLTEN",
+			  "EN_PP3300_DISP_X",
+			  "EN_PP3300_SDBRDG_X",
+			  "BT_KILL_1V8_L",
+			  "WIFI_KILL_1V8_L",
+			  "PWRAP_SPI0_CSN",
+			  "PWRAP_SPI0_CK",
+			  "PWRAP_SPI0_MO",
+			  "PWRAP_SPI0_MI",
+			  "SRCLKENA0",
+			  "SRCLKENA1",
+			  "SCP_VREQ_VAO",
+			  "AP_RTC_CLK32K",
+			  "AP_PMIC_WDTRST_L",
+			  "AUD_CLK_MOSI",
+			  "AUD_SYNC_MOSI",
+			  "AUD_DAT_MOSI0",
+			  "AUD_DAT_MOSI1",
+			  "AUD_CLK_MISO",
+			  "AUD_SYNC_MISO",
+			  "AUD_DAT_MISO0",
+			  "AUD_DAT_MISO1",
+			  "NC",
+			  "NC",
+			  "DPBRDG_PWREN",
+			  "DPBRDG_RST_L",
+			  "LTE_W_DISABLE_L",
+			  "LTE_SAR_DETECT_L",
+			  "EN_PP3300_LTE_X",
+			  "LTE_PWR_OFF_L",
+			  "LTE_RESET_L",
+			  "TP",
+			  "TP";
+
+	aud_clk_mosi_off: aud-clk-mosi-off-pins {
+		pins-clk-sync {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>,
+				 <PINMUX_GPIO167__FUNC_GPIO167>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	aud_clk_mosi_on: aud-clk-mosi-on-pins {
+		pins-clk-sync {
+			pinmux = <PINMUX_GPIO166__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO167__FUNC_AUD_SYNC_MOSI>;
+		};
+	};
+
+	aud_clk_miso_off: aud-clk-miso-off-pins {
+		pins-clk-sync {
+			pinmux = <PINMUX_GPIO170__FUNC_GPIO170>,
+				 <PINMUX_GPIO171__FUNC_GPIO171>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	aud_clk_miso_on: aud-clk-miso-on-pins {
+		pins-clk-sync {
+			pinmux = <PINMUX_GPIO170__FUNC_AUD_CLK_MISO>,
+				 <PINMUX_GPIO171__FUNC_AUD_SYNC_MISO>;
+		};
+	};
+
+	aud_dat_mosi_off: aud-dat-mosi-off-pins {
+		pins-dat {
+			pinmux = <PINMUX_GPIO168__FUNC_GPIO168>,
+				 <PINMUX_GPIO169__FUNC_GPIO169>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	aud_dat_mosi_on: aud-dat-mosi-on-pins {
+		pins-dat {
+			pinmux = <PINMUX_GPIO168__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO169__FUNC_AUD_DAT_MOSI1>;
+		};
+	};
+
+	aud_dat_miso_off: aud-dat-miso-off-pins {
+		pins-dat {
+			pinmux = <PINMUX_GPIO172__FUNC_GPIO172>,
+				 <PINMUX_GPIO173__FUNC_GPIO173>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	aud_dat_miso_on: aud-dat-miso-on-pins {
+		pins-dat {
+			pinmux = <PINMUX_GPIO172__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO173__FUNC_AUD_DAT_MISO1>;
+			input-schmitt-enable;
+			bias-disable;
+		};
+	};
+
+	aud_gpio_i2s0_off: aud-gpio-i2s0-off-pins {
+		pins-sdata {
+			pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
+		};
+	};
+
+	aud_gpio_i2s0_on: aud-gpio-i2s0-on-pins {
+		pins-sdata {
+			pinmux = <PINMUX_GPIO3__FUNC_I2S0_DI>;
+		};
+	};
+
+	aud_gpio_i2s1_off: aud-gpio-i2s-off-pins {
+		pins-clk-sdata {
+			pinmux = <PINMUX_GPIO56__FUNC_GPIO56>,
+				 <PINMUX_GPIO57__FUNC_GPIO57>,
+				 <PINMUX_GPIO58__FUNC_GPIO58>,
+				 <PINMUX_GPIO59__FUNC_GPIO59>;
+			output-low;
+		};
+	};
+
+	aud_gpio_i2s1_on: aud-gpio-i2s1-on-pins {
+		pins-clk-sdata {
+			pinmux = <PINMUX_GPIO56__FUNC_I2S1_DO>,
+				 <PINMUX_GPIO57__FUNC_I2S1_BCK>,
+				 <PINMUX_GPIO58__FUNC_I2S1_LRCK>,
+				 <PINMUX_GPIO59__FUNC_I2S1_MCK>;
+		};
+	};
+
+	aud_gpio_i2s2_off: aud-gpio-i2s2-off-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO26__FUNC_GPIO26>,
+				 <PINMUX_GPIO27__FUNC_GPIO27>;
+			output-low;
+		};
+	};
+
+	aud_gpio_i2s2_on: aud-gpio-i2s2-on-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO26__FUNC_I2S2_BCK>,
+				 <PINMUX_GPIO27__FUNC_I2S2_LRCK>;
+			drive-strength = <4>;
+		};
+	};
+
+	aud_gpio_i2s3_off: aud-gpio-i2s3-off-pins {
+		pins-sdata {
+			pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
+			output-low;
+		};
+	};
+
+	aud_gpio_i2s3_on: aud-gpio-i2s3-on-pins {
+		pins-sdata {
+			pinmux = <PINMUX_GPIO4__FUNC_I2S3_DO>;
+			drive-strength = <4>;
+		};
+	};
+
+	aud_gpio_pcm_off: aud-gpio-pcm-off-pins {
+		pins-clk-sdata {
+			pinmux = <PINMUX_GPIO115__FUNC_GPIO115>,
+				 <PINMUX_GPIO116__FUNC_GPIO116>,
+				 <PINMUX_GPIO117__FUNC_GPIO117>,
+				 <PINMUX_GPIO118__FUNC_GPIO118>;
+			output-low;
+		};
+	};
+
+	aud_gpio_pcm_on: aud-gpio-pcm-on-pins {
+		pins-clk-sdata {
+			pinmux = <PINMUX_GPIO115__FUNC_PCM_CLK>,
+				 <PINMUX_GPIO116__FUNC_PCM_SYNC>,
+				 <PINMUX_GPIO117__FUNC_PCM_DI>,
+				 <PINMUX_GPIO118__FUNC_PCM_DO>;
+		};
+	};
+
+	aud_gpio_dmic_sec: aud-gpio-dmic-sec-pins {
+		pins {
+			pinmux = <PINMUX_GPIO23__FUNC_GPIO23>;
+			output-low;
+		};
+	};
+
+	bt_pins_reset: bt-reset-pins {
+		pins-bt-reset {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			output-high;
+		};
+	};
+
+	dpi_pins_sleep: dpi-sleep-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO103__FUNC_GPIO103>,
+				 <PINMUX_GPIO104__FUNC_GPIO104>,
+				 <PINMUX_GPIO105__FUNC_GPIO105>,
+				 <PINMUX_GPIO106__FUNC_GPIO106>,
+				 <PINMUX_GPIO107__FUNC_GPIO107>,
+				 <PINMUX_GPIO108__FUNC_GPIO108>,
+				 <PINMUX_GPIO109__FUNC_GPIO109>,
+				 <PINMUX_GPIO110__FUNC_GPIO110>,
+				 <PINMUX_GPIO111__FUNC_GPIO111>,
+				 <PINMUX_GPIO112__FUNC_GPIO112>,
+				 <PINMUX_GPIO113__FUNC_GPIO113>,
+				 <PINMUX_GPIO114__FUNC_GPIO114>,
+				 <PINMUX_GPIO101__FUNC_GPIO101>,
+				 <PINMUX_GPIO100__FUNC_GPIO100>,
+				 <PINMUX_GPIO102__FUNC_GPIO102>,
+				 <PINMUX_GPIO99__FUNC_GPIO99>;
+			drive-strength = <10>;
+			output-low;
+		};
+	};
+
+	dpi_pins_default: dpi-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO103__FUNC_DPI_DATA0>,
+				 <PINMUX_GPIO104__FUNC_DPI_DATA1>,
+				 <PINMUX_GPIO105__FUNC_DPI_DATA2>,
+				 <PINMUX_GPIO106__FUNC_DPI_DATA3>,
+				 <PINMUX_GPIO107__FUNC_DPI_DATA4>,
+				 <PINMUX_GPIO108__FUNC_DPI_DATA5>,
+				 <PINMUX_GPIO109__FUNC_DPI_DATA6>,
+				 <PINMUX_GPIO110__FUNC_DPI_DATA7>,
+				 <PINMUX_GPIO111__FUNC_DPI_DATA8>,
+				 <PINMUX_GPIO112__FUNC_DPI_DATA9>,
+				 <PINMUX_GPIO113__FUNC_DPI_DATA10>,
+				 <PINMUX_GPIO114__FUNC_DPI_DATA11>,
+				 <PINMUX_GPIO101__FUNC_DPI_HSYNC>,
+				 <PINMUX_GPIO100__FUNC_DPI_VSYNC>,
+				 <PINMUX_GPIO102__FUNC_DPI_DE>,
+				 <PINMUX_GPIO99__FUNC_DPI_PCLK>;
+			drive-strength = <10>;
+		};
+	};
+
+	ec_ap_int: cros-ec-int-pins {
+		pins-ec-ap-int-odl {
+			pinmux = <PINMUX_GPIO13__FUNC_GPIO13>;
+			input-enable;
+		};
+	};
+
+	edp_panel_fixed_pins: edp-panel-fixed-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
+			output-high;
+		};
+	};
+
+	en_pp1800_dpbrdg: en-pp1800-dpbrdg-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO39__FUNC_GPIO39>;
+			output-low;
+		};
+	};
+
+	gsc_int: gsc-int-pins {
+		pins-gsc-ap-int-odl {
+			pinmux = <PINMUX_GPIO15__FUNC_GPIO15>;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO128__FUNC_SDA0>,
+				 <PINMUX_GPIO127__FUNC_SCL0>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO130__FUNC_SDA1>,
+				 <PINMUX_GPIO129__FUNC_SCL1>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO132__FUNC_SDA2>,
+				 <PINMUX_GPIO131__FUNC_SCL2>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO134__FUNC_SDA3>,
+				 <PINMUX_GPIO133__FUNC_SCL3>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO138__FUNC_SDA5>,
+				 <PINMUX_GPIO137__FUNC_SCL5>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	it6505_pins: it6505-pins {
+		pins-hpd {
+			pinmux = <PINMUX_GPIO10__FUNC_GPIO10>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-int {
+			pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO177__FUNC_GPIO177>;
+			output-low;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_default: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO72__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO73__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO74__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO75__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO76__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO77__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO78__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO69__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO72__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO73__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO74__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO75__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO76__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO77__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO78__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO69__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO67__FUNC_MSDC0_DSL>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_pins_default: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO87__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO88__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO89__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO85__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO87__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO88__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO89__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO85__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_pins_eint: mmc1-eint-pins {
+		pins-dat1 {
+			pinmux = <PINMUX_GPIO87__FUNC_GPIO87>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins_default: nor-default-pins {
+		pins-clk-dat {
+			pinmux = <PINMUX_GPIO63__FUNC_SPINOR_IO0>,
+				 <PINMUX_GPIO61__FUNC_SPINOR_CK>,
+				 <PINMUX_GPIO64__FUNC_SPINOR_IO1>;
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		pins-cs-dat {
+			pinmux = <PINMUX_GPIO62__FUNC_SPINOR_CS>,
+				 <PINMUX_GPIO65__FUNC_SPINOR_IO2>,
+				 <PINMUX_GPIO66__FUNC_SPINOR_IO3>;
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	pen_eject: pen-eject-pins {
+		pins {
+			pinmux = <PINMUX_GPIO18__FUNC_GPIO18>;
+			input-enable;
+			/* External pull-up. */
+			bias-disable;
+		};
+	};
+
+	pwm0_pin: disp-pwm-pins {
+		pins {
+			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM>;
+			output-high;
+		};
+	};
+
+	speaker_codec_pins_default: speaker-codec-default-pins {
+		pins-sdb {
+			pinmux = <PINMUX_GPIO150__FUNC_GPIO150>;
+			output-low;
+		};
+	};
+
+	scp_pins: scp-default-pins {
+		pins-scp-uart {
+			pinmux = <PINMUX_GPIO48__FUNC_TP_URXD2_AO>,
+				 <PINMUX_GPIO49__FUNC_TP_UTXD2_AO>;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO40__FUNC_SPI1_CLK_A>,
+				 <PINMUX_GPIO41__FUNC_SPI1_CSB_A>,
+				 <PINMUX_GPIO42__FUNC_SPI1_MO_A>,
+				 <PINMUX_GPIO43__FUNC_SPI1_MI_A>;
+			bias-disable;
+			input-enable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO44__FUNC_SPI2_CLK_A>,
+				 <PINMUX_GPIO45__FUNC_GPIO45>,
+				 <PINMUX_GPIO46__FUNC_SPI2_MO_A>,
+				 <PINMUX_GPIO47__FUNC_SPI2_MI_A>;
+			bias-disable;
+			input-enable;
+		};
+	};
+
+	spmi_pins: spmi-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO183__FUNC_SPMI_SCL>,
+				 <PINMUX_GPIO184__FUNC_SPMI_SDA>;
+		};
+	};
+
+	touchscreen_pins: touchscreen-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO12__FUNC_GPIO12>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO60__FUNC_GPIO60>;
+			output-high;
+		};
+
+		pins-report-sw {
+			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
+			output-low;
+		};
+	};
+
+	trackpad_pin: trackpad-default-pins {
+		pins-int-n {
+			pinmux = <PINMUX_GPIO11__FUNC_GPIO11>;
+			input-enable;
+			bias-disable; /* pulled externally */
+		};
+	};
+
+	wifi_enable_pin: wifi-enable-pins {
+		pins-wifi-enable {
+			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
+		};
+	};
+
+	wifi_wakeup_pin: wifi-wakeup-pins {
+		pins-wifi-wakeup {
+			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
+			input-enable;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&pwrap {
+	pmic {
+		compatible = "mediatek,mt6366", "mediatek,mt6358";
+		interrupt-controller;
+		interrupts-extended = <&pio 201 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+
+		mt6366codec: audio-codec {
+			compatible = "mediatek,mt6366-sound", "mediatek,mt6358-sound";
+			Avdd-supply = <&mt6366_vaud28_reg>;
+			mediatek,dmic-mode = <1>; /* one-wire */
+		};
+
+		mt6366_regulators: regulators {
+			compatible = "mediatek,mt6366-regulator", "mediatek,mt6358-regulator";
+			vsys-ldo1-supply = <&pp4200_z2>;
+			vsys-ldo2-supply = <&pp4200_z2>;
+			vsys-ldo3-supply = <&pp4200_z2>;
+			vsys-vcore-supply = <&pp4200_z2>;
+			vsys-vdram1-supply = <&pp4200_z2>;
+			vsys-vgpu-supply = <&pp4200_z2>;
+			vsys-vmodem-supply = <&pp4200_z2>;
+			vsys-vpa-supply = <&pp4200_z2>;
+			vsys-vproc11-supply = <&pp4200_z2>;
+			vsys-vproc12-supply = <&pp4200_z2>;
+			vsys-vs1-supply = <&pp4200_z2>;
+			vsys-vs2-supply = <&pp4200_z2>;
+			vs1-ldo1-supply = <&mt6366_vs1_reg>;
+			vs2-ldo1-supply = <&mt6366_vdram1_reg>;
+			vs2-ldo2-supply = <&mt6366_vs2_reg>;
+			vs2-ldo3-supply = <&mt6366_vs2_reg>;
+
+			vcore {
+				regulator-name = "pp0750_dvdd_core";
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-always-on;
+			};
+
+			mt6366_vdram1_reg: vdram1 {
+				regulator-name = "pp1125_emi_vdd2";
+				regulator-min-microvolt = <1125000>;
+				regulator-max-microvolt = <1125000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-always-on;
+			};
+
+			mt6366_vgpu_reg: vgpu {
+				/*
+				 * Called "ppvar_dvdd_gpu" in the schematic.
+				 * Called "ppvar_dvdd_vgpu" here to match
+				 * regulator coupling requirements.
+				 */
+				regulator-name = "ppvar_dvdd_vgpu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-coupled-with = <&mt6366_vsram_gpu_reg>;
+				regulator-coupled-max-spread = <100000>;
+			};
+
+			mt6366_vproc11_reg: vproc11 {
+				regulator-name = "ppvar_dvdd_proc_bc_mt6366";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-always-on;
+			};
+
+			mt6366_vproc12_reg: vproc12 {
+				regulator-name = "ppvar_dvdd_proc_lc";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-always-on;
+			};
+
+			mt6366_vs1_reg: vs1 {
+				regulator-name = "pp2000_vs1";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6366_vs2_reg: vs2 {
+				regulator-name = "pp1350_vs2";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			va12 {
+				regulator-name = "pp1200_va12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			mt6366_vaud28_reg: vaud28 {
+				regulator-name = "pp2800_vaud28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vaux18_reg: vaux18 {
+				regulator-name = "pp1840_vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1840000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vbif28_reg: vbif28 {
+				regulator-name = "pp2800_vbif28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vcn18_reg: vcn18 {
+				regulator-name = "pp1800_vcn18_x";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vcn28_reg: vcn28 {
+				regulator-name = "pp2800_vcn28_x";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vefuse_reg: vefuse {
+				regulator-name = "pp1800_vefuse";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vfe28_reg: vfe28 {
+				regulator-name = "pp2800_vfe28_x";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vemc_reg: vemc {
+				regulator-name = "pp3000_vemc";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6366_vibr_reg: vibr {
+				regulator-name = "pp2800_vibr_x";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6366_vio18_reg: vio18 {
+				regulator-name = "pp1800_vio18_s3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <2700>;
+				regulator-always-on;
+			};
+
+			mt6366_vio28_reg: vio28 {
+				regulator-name = "pp2800_vio28_x";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vm18_reg: vm18 {
+				regulator-name = "pp1800_emi_vdd1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1840000>;
+				regulator-enable-ramp-delay = <325>;
+				regulator-always-on;
+			};
+
+			mt6366_vmc_reg: vmc {
+				regulator-name = "pp3000_vmc";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6366_vmddr_reg: vmddr {
+				regulator-name = "pm0750_emi_vmddr";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <750000>;
+				regulator-enable-ramp-delay = <325>;
+				regulator-always-on;
+			};
+
+			mt6366_vmch_reg: vmch {
+				regulator-name = "pp3000_vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6366_vcn33_reg: vcn33 {
+				regulator-name = "pp3300_vcn33_x";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			vdram2 {
+				regulator-name = "pp0600_emi_vddq";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <600000>;
+				regulator-enable-ramp-delay = <3300>;
+				regulator-always-on;
+			};
+
+			mt6366_vrf12_reg: vrf12 {
+				regulator-name = "pp1200_vrf12_x";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			mt6366_vrf18_reg: vrf18 {
+				regulator-name = "pp1800_vrf18_x";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			vsim1 {
+				regulator-name = "pp1860_vsim1_x";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1860000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+
+			mt6366_vsim2_reg: vsim2 {
+				regulator-name = "pp2760_vsim2_x";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2760000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+
+			mt6366_vsram_gpu_reg: vsram-gpu {
+				regulator-name = "pp0900_dvdd_sram_gpu";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-coupled-with = <&mt6366_vgpu_reg>;
+				regulator-coupled-max-spread = <100000>;
+			};
+
+			mt6366_vsram_others_reg: vsram-others {
+				regulator-name = "pp0900_dvdd_sram_core";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6366_vsram_proc11_reg: vsram-proc11 {
+				regulator-name = "pp0900_dvdd_sram_bc";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1120000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6366_vsram_proc12_reg: vsram-proc12 {
+				regulator-name = "pp0900_dvdd_sram_lc";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1120000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			vusb {
+				regulator-name = "pp3070_vusb";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3070000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			vxo22 {
+				regulator-name = "pp2240_vxo22";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2240000>;
+				regulator-enable-ramp-delay = <120>;
+				/* Feeds DCXO internally */
+				regulator-always-on;
+			};
+		};
+
+		rtc {
+			compatible = "mediatek,mt6366-rtc", "mediatek,mt6358-rtc";
+		};
+	};
+};
+
+&scp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+	firmware-name = "mediatek/mt8186/scp.img";
+	memory-region = <&scp_mem>;
+	status = "okay";
+
+	cros-ec-rpmsg {
+		compatible = "google,cros-ec-rpmsg";
+		mediatek,rpmsg-name = "cros-ec-rpmsg";
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupts-extended = <&pio 13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_ap_int>;
+		spi-max-frequency = <1000000>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+
+		usbc_extcon: extcon0 {
+			compatible = "google,extcon-usbc-cros-ec";
+			google,usb-port-id = <0>;
+		};
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	cs-gpios = <&pio 45 GPIO_ACTIVE_LOW>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsc_int>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&ssusb0 {
+	status = "okay";
+};
+
+&ssusb1 {
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_host0 {
+	vbus-supply = <&pp3300_s3>;
+	status = "okay";
+};
+
+&usb_host1 {
+	vbus-supply = <&usb_p1_vbus>;
+	status = "okay";
+};
+
+&watchdog {
+	mediatek,reset-by-toprgu;
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index df0c04f2ba1d..b91f88ffae0e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -13,6 +13,8 @@
 #include <dt-bindings/power/mt8186-power.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/reset/mt8186-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
 
 / {
 	compatible = "mediatek,mt8186";
@@ -22,11 +24,18 @@
 
 	aliases {
 		ovl0 = &ovl0;
-		ovl_2l0 = &ovl_2l0;
+		ovl-2l0 = &ovl_2l0;
 		rdma0 = &rdma0;
 		rdma1 = &rdma1;
 	};
 
+	fhctl: fhctl@1000ce00 {
+		compatible = "mediatek,mt8186-fhctl";
+		clocks = <&apmixedsys CLK_APMIXED_TVDPLL>;
+		reg = <0 0x1000ce00 0 0x200>;
+		status = "disabled";
+	};
+
 	cci: cci {
 		compatible = "mediatek,mt8186-cci";
 		clocks = <&mcusys CLK_MCU_ARMPLL_BUS_SEL>,
@@ -731,7 +740,7 @@
 		opp-900000000-3 {
 			opp-hz = /bits/ 64 <900000000>;
 			opp-microvolt = <850000>;
-			opp-supported-hw = <0x8>;
+			opp-supported-hw = <0xcf>;
 		};
 
 		opp-900000000-4 {
@@ -743,13 +752,13 @@
 		opp-900000000-5 {
 			opp-hz = /bits/ 64 <900000000>;
 			opp-microvolt = <825000>;
-			opp-supported-hw = <0x30>;
+			opp-supported-hw = <0x20>;
 		};
 
 		opp-950000000-3 {
 			opp-hz = /bits/ 64 <950000000>;
 			opp-microvolt = <900000>;
-			opp-supported-hw = <0x8>;
+			opp-supported-hw = <0xcf>;
 		};
 
 		opp-950000000-4 {
@@ -761,13 +770,13 @@
 		opp-950000000-5 {
 			opp-hz = /bits/ 64 <950000000>;
 			opp-microvolt = <850000>;
-			opp-supported-hw = <0x30>;
+			opp-supported-hw = <0x20>;
 		};
 
 		opp-1000000000-3 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <950000>;
-			opp-supported-hw = <0x8>;
+			opp-supported-hw = <0xcf>;
 		};
 
 		opp-1000000000-4 {
@@ -779,7 +788,7 @@
 		opp-1000000000-5 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <875000>;
-			opp-supported-hw = <0x30>;
+			opp-supported-hw = <0x20>;
 		};
 	};
 
@@ -931,11 +940,17 @@
 
 				power-domain@MT8186_POWER_DOMAIN_SSUSB {
 					reg = <MT8186_POWER_DOMAIN_SSUSB>;
+					clocks = <&topckgen CLK_TOP_USB_TOP>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>;
+					clock-names = "sys_ck", "ref_ck";
 					#power-domain-cells = <0>;
 				};
 
 				power-domain@MT8186_POWER_DOMAIN_SSUSB_P1 {
 					reg = <MT8186_POWER_DOMAIN_SSUSB_P1>;
+					clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>;
+					clock-names = "sys_ck", "ref_ck";
 					#power-domain-cells = <0>;
 				};
 
@@ -1061,7 +1076,7 @@
 						reg = <MT8186_POWER_DOMAIN_VENC>;
 						clocks = <&topckgen CLK_TOP_VENC>,
 							 <&vencsys CLK_VENC_CKE1_VENC>;
-						clock-names = "venc0", "larb";
+						clock-names = "venc0", "subsys-larb";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
@@ -1160,14 +1175,14 @@
 			status = "disabled";
 		};
 
-		adsp_mailbox0: mailbox@10686000 {
+		adsp_mailbox0: mailbox@10686100 {
 			compatible = "mediatek,mt8186-adsp-mbox";
 			#mbox-cells = <0>;
 			reg = <0 0x10686100 0 0x1000>;
 			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
-		adsp_mailbox1: mailbox@10687000 {
+		adsp_mailbox1: mailbox@10687100 {
 			compatible = "mediatek,mt8186-adsp-mbox";
 			#mbox-cells = <0>;
 			reg = <0 0x10687100 0 0x1000>;
@@ -1355,6 +1370,29 @@
 			status = "disabled";
 		};
 
+		lvts: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8186-lvts";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8186_INFRA_THERMAL_CTRL_RST>;
+			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+			nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+			#thermal-sensor-cells = <1>;
+		};
+
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8186-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>, <&lvts_efuse_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg_ao MT8186_INFRA_PTP_CTRL_RST>;
+			reset-names = "svs_rst";
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8186-disp-pwm", "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1530,14 +1568,17 @@
 			clocks = <&topckgen CLK_TOP_USB_TOP>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
-				 <&infracfg_ao CLK_INFRA_AO_ICUSB>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+				 <&infracfg_ao CLK_INFRA_AO_ICUSB>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&u2port0 PHY_TYPE_USB2>;
 			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x420 2>;
 			status = "disabled";
 
 			usb_host0: usb@11200000 {
@@ -1551,8 +1592,6 @@
 					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
 				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 				interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>;
-				mediatek,syscon-wakeup = <&pericfg 0x420 2>;
-				wakeup-source;
 				status = "disabled";
 			};
 		};
@@ -1595,14 +1634,17 @@
 			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>,
-				 <&clk26m>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
 			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB_P1>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x424 2>;
 			status = "disabled";
 
 			usb_host1: usb@11280000 {
@@ -1616,8 +1658,6 @@
 					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
 				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck","xhci_ck";
 				interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>;
-				mediatek,syscon-wakeup = <&pericfg 0x424 2>;
-				wakeup-source;
 				status = "disabled";
 			};
 		};
@@ -1668,10 +1708,26 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			lvts_efuse_data1: lvts1-calib@1cc {
+				reg = <0x1cc 0x14>;
+			};
+
+			lvts_efuse_data2: lvts2-calib@2f8 {
+				reg = <0x2f8 0x14>;
+			};
+
+			svs_calibration: calib@550 {
+				reg = <0x550 0x50>;
+			};
+
 			gpu_speedbin: gpu-speedbin@59c {
 				reg = <0x59c 0x4>;
 				bits = <0 3>;
 			};
+
+			socinfo-data1@7a0 {
+				reg = <0x7a0 0x4>;
+			};
 		};
 
 		mipi_tx0: dsi-phy@11cc0000 {
@@ -1812,6 +1868,7 @@
 			assigned-clocks = <&topckgen CLK_TOP_DPI>;
 			assigned-clock-parents = <&topckgen CLK_TOP_TVDPLL_D2>;
 			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_LOW 0>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
 			status = "disabled";
 
 			port {
@@ -1959,6 +2016,43 @@
 			power-domains = <&spm MT8186_POWER_DOMAIN_IMG2>;
 		};
 
+		video_decoder: video-decoder@16000000 {
+			compatible = "mediatek,mt8186-vcodec-dec";
+			reg = <0 0x16000000 0 0x1000>;
+			ranges;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
+			iommus = <&iommu_mm IOMMU_PORT_L4_HW_VDEC_MC_EXT>;
+			mediatek,scp = <&scp>;
+
+			vcodec_core: video-codec@16025000 {
+				compatible = "mediatek,mtk-vcodec-core";
+				reg = <0 0x16025000 0 0x1000>;
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu_mm IOMMU_PORT_L4_HW_VDEC_MC_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_UFO_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PP_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PRED_RD_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PRED_WR_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PPWRAP_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_TILE_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_VLD_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_VLD2_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_AVC_MV_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_UFO_ENC_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_RG_CTRL_DMA_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys CLK_VDEC_CKEN>,
+					 <&vdecsys CLK_VDEC_LARB1_CKEN>,
+					 <&topckgen CLK_TOP_UNIVPLL_D3>;
+				clock-names = "vdec-sel", "vdec-soc-vdec", "vdec", "vdec-top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3>;
+				power-domains = <&spm MT8186_POWER_DOMAIN_VDEC>;
+			};
+		};
+
 		larb4: smi@1602e000 {
 			compatible = "mediatek,mt8186-smi-larb";
 			reg = <0 0x1602e000 0 0x1000>;
@@ -1993,6 +2087,40 @@
 			power-domains = <&spm MT8186_POWER_DOMAIN_VENC>;
 		};
 
+		venc: video-encoder@17020000 {
+			compatible = "mediatek,mt8186-vcodec-enc", "mediatek,mt8183-vcodec-enc";
+			reg = <0 0x17020000 0 0x2000>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L7_VENC_RCPU>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_REC>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_BSDMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_SV_COMV>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_RD_COMV>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_CUR_LUMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_CUR_CHROMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_REF_LUMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_REF_CHROMA>;
+			clocks = <&vencsys CLK_VENC_CKE1_VENC>;
+			clock-names = "venc_sel";
+			assigned-clocks = <&topckgen CLK_TOP_VENC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_VENC>;
+			mediatek,scp = <&scp>;
+		};
+
+		jpgenc: jpeg-encoder@17030000 {
+			compatible = "mediatek,mt8186-jpgenc", "mediatek,mtk-jpgenc";
+			reg = <0 0x17030000 0 0x10000>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vencsys CLK_VENC_CKE2_JPGENC>;
+			clock-names = "jpgenc";
+			iommus = <&iommu_mm IOMMU_PORT_L7_JPGENC_Y_RDMA>,
+				 <&iommu_mm IOMMU_PORT_L7_JPGENC_C_RDMA>,
+				 <&iommu_mm IOMMU_PORT_L7_JPGENC_Q_TABLE>,
+				 <&iommu_mm IOMMU_PORT_L7_JPGENC_BSDMA>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_VENC>;
+		};
+
 		camsys: clock-controller@1a000000 {
 			compatible = "mediatek,mt8186-camsys";
 			reg = <0 0x1a000000 0 0x1000>;
@@ -2095,4 +2223,299 @@
 			power-domains = <&spm MT8186_POWER_DOMAIN_IPE>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu-little0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts MT8186_LITTLE_CPU0>;
+
+			trips {
+				cpu_little0_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little0_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_little0_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-little1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts MT8186_LITTLE_CPU1>;
+
+			trips {
+				cpu_little1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_little1_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-little2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts MT8186_LITTLE_CPU2>;
+
+			trips {
+				cpu_little2_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little2_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_little2_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cam-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts MT8186_CAM>;
+
+			trips {
+				cam_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cam_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nna-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts MT8186_NNA>;
+
+			trips {
+				nna_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				nna_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nna_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		adsp-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts MT8186_ADSP>;
+
+			trips {
+				adsp_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				adsp_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				adsp_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts MT8186_GPU>;
+
+			trips {
+				gpu_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-big0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&lvts MT8186_BIG_CPU0>;
+
+			trips {
+				cpu_big0_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_big0_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_big0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_big0_alert0>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-big1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&lvts MT8186_BIG_CPU1>;
+
+			trips {
+				cpu_big1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_big1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_big1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_big1_alert0>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
new file mode 100644
index 000000000000..f4c207d65b87
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8188.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	model = "MediaTek MT8188 evaluation board";
+	compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
+
+	aliases {
+		serial0 = &uart0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <8>;
+	hs400-ds-delay = <0x1481b>;
+	max-frequency = <200000000>;
+
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	non-removable;
+
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+
+	status = "okay";
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+	};
+};
+
+&pio {
+	adsp_uart_pins: adsp-uart-pins {
+		pins-tx-rx {
+			pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
+				 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk-ds {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>,
+				 <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins_default: nor-pins {
+		pins-io-ck {
+			pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
+				 <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
+				 <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
+			bias-pull-down;
+		};
+
+		pins-io-cs {
+			pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>,
+				 <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>,
+				 <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>;
+			bias-pull-up;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-rx-tx {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
+	memory-region = <&scp_mem_reserved>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&xhci2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku0.dts
new file mode 100644
index 000000000000..79d6d12394b9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku0.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku0 board";
+	compatible = "google,ciri-sku0", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "boe,nv110wum-l60", "himax,hx83102";
+};
+
+&sound {
+	compatible = "mediatek,mt8188-rt5682s";
+	model = "mt8188_m98390_5682";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"IN1P", "Headset Mic",
+		"Left Spk", "Front Left BE_OUT",
+		"Right Spk", "Front Right BE_OUT";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku1.dts
new file mode 100644
index 000000000000..ef5ea9d12b1d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku1.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku1 board";
+	compatible = "google,ciri-sku1", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "ivo,t109nw41", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ audio-codec@1a;
+
+	es8326: audio-codec@19 {
+		compatible = "everest,es8326";
+		reg = <0x19>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <0>;
+		everest,jack-pol = [0e];
+		everest,interrupt-clk = [00];
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-es8326";
+	model = "mt8188_m98390_8326";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"MIC1", "Headset Mic",
+		"Left Spk", "Front Left BE_OUT",
+		"Right Spk", "Front Right BE_OUT";
+
+	dai-link-2 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+
+	dai-link-3 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku2.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku2.dts
new file mode 100644
index 000000000000..ef56786fc2be
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku2.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku2 board";
+	compatible = "google,ciri-sku2", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "boe,nv110wum-l60", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ audio-codec@1a;
+
+	es8326: audio-codec@19 {
+		compatible = "everest,es8326";
+		reg = <0x19>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <0>;
+		everest,jack-pol = [0e];
+		everest,interrupt-clk = [00];
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-es8326";
+	model = "mt8188_m98390_8326";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"MIC1", "Headset Mic",
+		"Left Spk", "Front Left BE_OUT",
+		"Right Spk", "Front Right BE_OUT";
+
+	dai-link-2 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+
+	dai-link-3 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku3.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku3.dts
new file mode 100644
index 000000000000..524f7f0064c1
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku3.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku3 board";
+	compatible = "google,ciri-sku3", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "ivo,t109nw41", "himax,hx83102";
+};
+
+&sound {
+	compatible = "mediatek,mt8188-rt5682s";
+	model = "mt8188_m98390_5682";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"IN1P", "Headset Mic",
+		"Left Spk", "Front Left BE_OUT",
+		"Right Spk", "Front Right BE_OUT";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku4.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku4.dts
new file mode 100644
index 000000000000..ea953d7e1543
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku4.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku4 board (rev4)";
+	compatible = "google,ciri-sku4", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "boe,nv110wum-l60", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ amplifier@38;
+	/delete-node/ amplifier@39;
+
+	tas2563: amplifier@4f {
+		compatible = "ti,tas2563", "ti,tas2781";
+		reg = <0x4f>, <0x4c>; /* left / right channel */
+		reset-gpios = <&pio 118 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-rt5682s";
+	model = "mt8188_tas2563_5682";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"IN1P", "Headset Mic";
+
+	dai-link-1 {
+		codec {
+			sound-dai = <&tas2563>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku5.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku5.dts
new file mode 100644
index 000000000000..bf87201ccf27
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku5.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku5 board (rev4)";
+	compatible = "google,ciri-sku5", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "ivo,t109nw41", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ audio-codec@1a;
+	/delete-node/ amplifier@38;
+	/delete-node/ amplifier@39;
+
+	es8326: audio-codec@19 {
+		compatible = "everest,es8326";
+		reg = <0x19>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <0>;
+		everest,jack-pol = [0e];
+		everest,interrupt-clk = [00];
+	};
+
+	tas2563: amplifier@4f {
+		compatible = "ti,tas2563", "ti,tas2781";
+		reg = <0x4f>, <0x4c>; /* left / right channel */
+		reset-gpios = <&pio 118 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-es8326";
+	model = "mt8188_tas2563_8326";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"MIC1", "Headset Mic";
+
+	dai-link-1 {
+		codec {
+			sound-dai = <&tas2563>;
+		};
+	};
+
+	dai-link-2 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+
+	dai-link-3 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku6.dts
new file mode 100644
index 000000000000..17d7359dfb6a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku6.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku6 board (rev4)";
+	compatible = "google,ciri-sku6", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "boe,nv110wum-l60", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ audio-codec@1a;
+	/delete-node/ amplifier@38;
+	/delete-node/ amplifier@39;
+
+	es8326: audio-codec@19 {
+		compatible = "everest,es8326";
+		reg = <0x19>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <0>;
+		everest,jack-pol = [0e];
+		everest,interrupt-clk = [00];
+	};
+
+	tas2563: amplifier@4f {
+		compatible = "ti,tas2563", "ti,tas2781";
+		reg = <0x4f>, <0x4c>; /* left / right channel */
+		reset-gpios = <&pio 118 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-es8326";
+	model = "mt8188_tas2563_8326";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"MIC1", "Headset Mic";
+
+	dai-link-1 {
+		codec {
+			sound-dai = <&tas2563>;
+		};
+	};
+
+	dai-link-2 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+
+	dai-link-3 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku7.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku7.dts
new file mode 100644
index 000000000000..825015b452d5
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku7.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku7 board (rev4)";
+	compatible = "google,ciri-sku7", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "ivo,t109nw41", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ amplifier@38;
+	/delete-node/ amplifier@39;
+
+	tas2563: amplifier@4f {
+		compatible = "ti,tas2563", "ti,tas2781";
+		reg = <0x4f>, <0x4c>; /* left / right channel */
+		reset-gpios = <&pio 118 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-rt5682s";
+	model = "mt8188_tas2563_5682";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"IN1P", "Headset Mic";
+
+	dai-link-1 {
+		codec {
+			sound-dai = <&tas2563>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri.dtsi
new file mode 100644
index 000000000000..6815c435a57e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri.dtsi
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt.dtsi"
+
+&aud_etdm_hp_on {
+	pins-mclk {
+		pinmux = <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>;
+	};
+};
+
+&aud_etdm_hp_off {
+	pins-mclk {
+		pinmux = <PINMUX_GPIO114__FUNC_B_GPIO114>;
+		bias-pull-down;
+		input-enable;
+	};
+};
+
+&i2c0 {
+	rt5682s: audio-codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_EDGE_BOTH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <1>;
+
+		AVDD-supply = <&mt6359_vio18_ldo_reg>;
+		DBVDD-supply = <&mt6359_vio18_ldo_reg>;
+		LDO1-IN-supply = <&mt6359_vio18_ldo_reg>;
+		MICVDD-supply = <&pp3300_s3>;
+		realtek,jd-src = <1>;
+	};
+
+	max98390_38: amplifier@38 {
+		compatible = "maxim,max98390";
+		reg = <0x38>;
+		sound-name-prefix = "Front Right";
+		reset-gpios = <&pio 118 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_en>;
+		#sound-dai-cells = <0>;
+	};
+
+	max98390_39: amplifier@39 {
+		compatible = "maxim,max98390";
+		reg = <0x39>;
+		sound-name-prefix = "Front Left";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c_tunnel {
+	/*
+	 * The virtual battery I2C addr is 0xf on Ciri, so we describe it
+	 * manually instead of including 'arm/cros-ec-sbs.dtsi'.
+	 **/
+	battery: sbs-battery@f {
+		compatible = "sbs,sbs-battery";
+		reg = <0xf>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
+
+&mipi_tx_config0 {
+	drive-strength-microamp = <5200>;
+};
+
+&mt6359_vm18_ldo_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1900000>;
+	regulator-microvolt-offset = <100000>;
+};
+
+&sound {
+	dai-link-0 {
+		link-name = "ETDM1_IN_BE";
+		dai-format = "i2s";
+		mediatek,clk-provider = "cpu";
+	};
+
+	dai-link-1 {
+		link-name = "ETDM1_OUT_BE";
+		dai-format = "i2s";
+		mediatek,clk-provider = "cpu";
+
+		codec {
+			sound-dai = <&max98390_38>,
+				    <&max98390_39>;
+		};
+	};
+
+	dai-link-2 {
+		link-name = "ETDM2_IN_BE";
+		mediatek,clk-provider = "cpu";
+
+		codec {
+			sound-dai = <&rt5682s 0>;
+		};
+	};
+
+	dai-link-3 {
+		link-name = "ETDM2_OUT_BE";
+		mediatek,clk-provider = "cpu";
+
+		codec {
+			sound-dai = <&rt5682s 0>;
+		};
+	};
+
+	dai-link-4 {
+		link-name = "DPTX_BE";
+
+		codec {
+			sound-dai = <&dp_tx>;
+		};
+	};
+};
+
+&pio {
+	gpio-line-names =
+		"GSC_AP_INT_ODL",
+		"AP_DISP_BKLTEN",
+		"",
+		"EN_PPVAR_MIPI_DISP",
+		"EN_PPVAR_MIPI_DISP_150MA",
+		"TCHSCR_RST_1V8_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_SPKR_DATAOUT",
+		"EN_PP3300_WLAN_X",
+		"WIFI_KILL_1V8_L",
+		"BT_KILL_1V8_L",
+		"AP_FLASH_WP_L", /* ... is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
+		"",
+		"",
+		"WCAM_PWDN_L",
+		"WCAM_RST_L",
+		"UCAM_PWDM_L",
+		"UCAM_RST_L",
+		"WCAM_24M_CLK",
+		"UCAM_24M_CLK",
+		"MT6319_INT",
+		"DISP_RST_1V8_L",
+		"DSIO_DSI_TE",
+		"",
+		"TP",
+		"MIPI_BL_PWM_1V8",
+		"",
+		"UART_AP_TX_GSC_RX",
+		"UART_GSC_TX_AP_RX",
+		"UART_SSPM_TX_DBGCON_RX",
+		"UART_DBGCON_TX_SSPM_RX",
+		"UART_ADSP_TX_DBGCON_RX",
+		"UART_DBGCON_TX_ADSP_RX",
+		"JTAG_AP_TMS",
+		"JTAG_AP_TCK",
+		"JTAG_AP_TDI",
+		"JTAG_AP_TDO",
+		"JTAG_AP_TRST",
+		"AP_KPCOL0",
+		"TP",
+		"",
+		"TP",
+		"EC_AP_HPD_OD",
+		"PCIE_WAKE_1V8_ODL",
+		"PCIE_RST_1V8_L",
+		"PCIE_CLKREQ_1V8_ODL",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_I2C_AUD_SCL_1V8",
+		"AP_I2C_AUD_SDA_1V8",
+		"AP_I2C_TPM_SCL_1V8",
+		"AP_I2C_TPM_SDA_1V8",
+		"AP_I2C_TCHSCR_SCL_1V8",
+		"AP_I2C_TCHSCR_SDA_1V8",
+		"AP_I2C_PMIC_SAR_SCL_1V8",
+		"AP_I2C_PMIC_SAR_SDA_1V8",
+		"AP_I2C_EC_HID_KB_SCL_1V8",
+		"AP_I2C_EC_HID_KB_SDA_1V8",
+		"AP_I2C_UCAM_SCL_1V8",
+		"AP_I2C_UCAM_SDA_1V8",
+		"AP_I2C_WCAM_SCL_1V8",
+		"AP_I2C_WCAM_SDA_1V8",
+		"SPI_AP_CS_EC_L",
+		"SPI_AP_CLK_EC",
+		"SPI_AP_DO_EC_DI",
+		"SPI_AP_DI_EC_DO",
+		"TP",
+		"TP",
+		"SPI_AP_CS_TCHSCR_L",
+		"SPI_AP_CLK_TCHSCR",
+		"SPI_AP_DO_TCHSCR_DI",
+		"SPI_AP_DI_TCHSCR_DO",
+		"TP",
+		"TP",
+		"TP",
+		"TP",
+		"",
+		"",
+		"",
+		"TP",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"PWRAP_SPI_CS_L",
+		"PWRAP_SPI_CK",
+		"PWRAP_SPI_MOSI",
+		"PWRAP_SPI_MISO",
+		"SRCLKENA0",
+		"SRCLKENA1",
+		"SCP_VREQ_VAO",
+		"AP_RTC_CLK32K",
+		"AP_PMIC_WDTRST_L",
+		"AUD_CLK_MOSI",
+		"AUD_SYNC_MOSI",
+		"AUD_DAT_MOSI0",
+		"AUD_DAT_MOSI1",
+		"AUD_DAT_MISO0",
+		"AUD_DAT_MISO1",
+		"",
+		"HP_INT_ODL",
+		"SPKR_INT_ODL",
+		"I2S_HP_DATAIN",
+		"EN_SPKR",
+		"I2S_SPKR_MCLK",
+		"I2S_SPKR_BCLK",
+		"I2S_HP_MCLK",
+		"I2S_HP_BCLK",
+		"I2S_HP_LRCK",
+		"I2S_HP_DATAOUT",
+		"RST_SPKR_L",
+		"I2S_SPKR_LRCK",
+		"I2S_SPKR_DATAIN",
+		"",
+		"",
+		"",
+		"",
+		"SPI_AP_CLK_ROM",
+		"SPI_AP_CS_ROM_L",
+		"SPI_AP_DO_ROM_DI",
+		"SPI_AP_DI_ROM_DO",
+		"TP",
+		"TP",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"EN_PP2800A_UCAM_X",
+		"EN_PP1200_UCAM_X",
+		"EN_PP2800A_WCAM_X",
+		"EN_PP1100_WCAM_X",
+		"TCHSCR_INT_1V8_L",
+		"",
+		"MT7921_PMU_EN_1V8",
+		"",
+		"AP_EC_WARM_RST_REQ",
+		"EC_AP_HID_INT_ODL",
+		"EC_AP_INT_ODL",
+		"AP_XHCI_INIT_DONE",
+		"EMMC_DAT7",
+		"EMMC_DAT6",
+		"EMMC_DAT5",
+		"EMMC_DAT4",
+		"EMMC_RST_L",
+		"EMMC_CMD",
+		"EMMC_CLK",
+		"EMMC_DAT3",
+		"EMMC_DAT2",
+		"EMMC_DAT1",
+		"EMMC_DAT0",
+		"EMMC_DSL",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"USB3_HUB_RST_L",
+		"EC_AP_RSVD0_ODL",
+		"",
+		"",
+		"SPMI_SCL",
+		"SPMI_SDA";
+
+	audio_codec_pins: audio-codec-pins {
+		pins-hp-int-odl {
+			pinmux = <PINMUX_GPIO108__FUNC_B_GPIO108>;
+			input-enable;
+		};
+	};
+
+	speaker_en: speaker-en-pins {
+		pins-en-spkr {
+			pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
new file mode 100644
index 000000000000..7fedbacdac44
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
@@ -0,0 +1,1340 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "mt8188.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	aliases {
+		dsi0 = &disp_dsi0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+		serial0 = &uart0;
+	};
+
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		enable-gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
+		num-interpolated-steps = <1023>;
+		power-supply = <&ppvar_sys>;
+		pwms = <&disp_pwm0 0 500000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <100>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* The size will be filled in by the bootloader */
+		reg = <0 0x40000000 0 0>;
+	};
+
+	/* system wide LDO 1.8V power rail */
+	pp1800_ldo_z1: regulator-pp1800-ldo-z1 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_ldo_z1";
+		/* controlled by PP3300_Z1 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&pp3300_z1>;
+	};
+
+	/* separately switched 3.3V power rail */
+	pp3300_s3: regulator-pp3300-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_s3";
+		/* controlled by PMIC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&pp3300_z1>;
+	};
+
+	/* system wide 3.3V power rail */
+	pp3300_z1: regulator-pp3300-z1 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_z1";
+		/* controlled by PP3300_LDO_Z5 & EN_PWR_Z1 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_wlan: regulator-pp3300-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_wlan";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&wlan_en>;
+		pinctrl-names = "default";
+		vin-supply = <&pp3300_z1>;
+	};
+
+	/* system wide 4.2V power rail */
+	pp4200_s5: regulator-pp4200-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp4200_s5";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide 5.0V power rail */
+	pp5000_z1: regulator-pp5000-z1 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_z1";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000_usb_vbus: regulator-pp5000-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 150 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp5000_z1>;
+	};
+
+	/* system wide semi-regulated power rail from battery or USB */
+	ppvar_sys: regulator-ppvar-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	ppvar_mipi_disp_avdd: regulator-ppvar-mipi-disp-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_mipi_disp_avdd";
+		enable-active-high;
+		gpio = <&pio 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mipi_disp_avdd_en>;
+		vin-supply = <&pp5000_z1>;
+	};
+
+	ppvar_mipi_disp_avee: regulator-ppvar-mipi-disp-avee {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_mipi_disp_avee";
+		regulator-enable-ramp-delay = <10000>;
+		enable-active-high;
+		gpio = <&pio 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mipi_disp_avee_en>;
+		vin-supply = <&pp5000_z1>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x800000>;
+			no-map;
+		};
+
+		apu_mem: memory@55000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x55000000 0 0x1400000>;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&adsp_uart_pins>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	mediatek,etdm-out1-cowork-source = <0>; /* in1 */
+	mediatek,etdm-in2-cowork-source = <3>; /* out2 */
+	status = "okay";
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&cam_vcore {
+	domain-supply = <&mt6359_vproc1_buck_reg>;
+};
+
+/*
+ * Geralt is the reference design and doesn't have target TDP.
+ * Ciri is (currently) the only device following Geralt, and its
+ * TDP target is 90 degrees.
+ **/
+&cpu_little0_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_little1_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_little2_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_little3_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_big0_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_big1_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&disp_dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	dsi_panel: panel@0 {
+		/* Compatible string for different panels can be found in each device dts */
+		reg = <0>;
+		enable-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mipi_dsi_pins>;
+
+		backlight = <&backlight_lcd0>;
+		avdd-supply = <&ppvar_mipi_disp_avdd>;
+		avee-supply = <&ppvar_mipi_disp_avee>;
+		pp1800-supply = <&mt6359_vm18_ldo_reg>;
+		rotation = <270>;
+
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+};
+
+&disp_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
+	status = "okay";
+};
+
+&disp_pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm1_pins>;
+};
+
+&dither0_in {
+	remote-endpoint = <&postmask0_out>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&ethdr0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ethdr0_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&vdosys1_ep_ext>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ethdr0_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_in>;
+			};
+		};
+	};
+};
+
+&gamma0_out {
+	remote-endpoint = <&postmask0_in>;
+};
+
+&dp_intf1 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			dp_intf1_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			dp_intf1_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dptx_in>;
+			};
+		};
+	};
+};
+
+&dp_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_tx_hpd>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dptx_in: endpoint {
+				remote-endpoint = <&dp_intf1_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dptx_out: endpoint {
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&mt6359_vproc2_buck_reg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tpm@50 {
+		compatible = "google,cr50";
+		reg = <0x50>;
+		interrupts-extended = <&pio 0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsc_int>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&merge5 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			merge5_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&ethdr0_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			merge5_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dp_intf1_in>;
+			};
+		};
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6359_vproc2_buck_reg>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mipi_tx_config0 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x1481b>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sd;
+	no-sdio;
+	non-removable;
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	supports-cqe;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+&mt6359codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+	mediatek,mic-type-0 = <2>; /* DMIC */
+	mediatek,mic-type-2 = <2>; /* DMIC */
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_sshub_buck_reg {
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <550000>;
+	regulator-always-on;
+};
+
+&mt6359_vio28_ldo_reg {
+	/delete-property/ regulator-always-on;
+};
+
+&mt6359_vm18_ldo_reg {
+	/delete-property/ regulator-always-on;
+};
+
+&mt6359_vmodem_buck_reg {
+	regulator-min-microvolt = <775000>;
+	regulator-max-microvolt = <775000>;
+};
+
+&mt6359_vpa_buck_reg {
+	regulator-max-microvolt = <3100000>;
+};
+
+&mt6359_vproc2_buck_reg {
+	/*
+	 * Called "ppvar_dvdd_gpu" in the schematic. Renamed to
+	 * "ppvar_dvdd_vgpu" here to match mtk-regulator-coupler requirements.
+	 */
+	regulator-name = "ppvar_dvdd_vgpu";
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-min-microvolt = <800000>;
+	regulator-max-microvolt = <800000>;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	regulator-name = "pp0850_dvdd_sram_gpu";
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+	};
+};
+
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio {
+	gpio-line-names =
+		"gsc_int",
+		"AP_DISP_BKLTEN",
+		"",
+		"EN_PPVAR_MIPI_DISP",
+		"EN_PPVAR_MIPI_DISP_150MA",
+		"TCHSCR_RST_1V8_L",
+		"TCHSRC_REPORT_DISABLE",
+		"",
+		"",
+		"",
+		"",
+		"I2S_SPKR_DATAOUT",
+		"EN_PP3300_WLAN_X",
+		"WIFI_KILL_1V8_L",
+		"BT_KILL_1V8_L",
+		"AP_FLASH_WP_L", /* ... is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
+		"",
+		"EDP_HPD_1V8",
+		"WCAM_PWDN_L",
+		"WCAM_RST_L",
+		"UCAM_PWDM_L",
+		"UCAM_RST_L",
+		"WCAM_24M_CLK",
+		"UCAM_24M_CLK",
+		"MT6319_INT",
+		"DISP_RST_1V8_L",
+		"DSIO_DSI_TE",
+		"EN_PP3300_EDP_DISP_X",
+		"TP",
+		"MIPI_BL_PWM_1V8",
+		"EDP_BL_PWM_1V8",
+		"UART_AP_TX_GSC_RX",
+		"UART_GSC_TX_AP_RX",
+		"UART_SSPM_TX_DBGCON_RX",
+		"UART_DBGCON_TX_SSPM_RX",
+		"UART_ADSP_TX_DBGCON_RX",
+		"UART_DBGCON_TX_ADSP_RX",
+		"JTAG_AP_TMS",
+		"JTAG_AP_TCK",
+		"JTAG_AP_TDI",
+		"JTAG_AP_TDO",
+		"JTAG_AP_TRST",
+		"AP_KPCOL0",
+		"TP",
+		"BEEP_ON_OD",
+		"TP",
+		"EC_AP_HPD_OD",
+		"PCIE_WAKE_1V8_ODL",
+		"PCIE_RST_1V8_L",
+		"PCIE_CLKREQ_1V8_ODL",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_I2C_AUD_SCL_1V8",
+		"AP_I2C_AUD_SDA_1V8",
+		"AP_I2C_TPM_SCL_1V8",
+		"AP_I2C_TPM_SDA_1V8",
+		"AP_I2C_TCHSCR_SCL_1V8",
+		"AP_I2C_TCHSCR_SDA_1V8",
+		"AP_I2C_PMIC_SAR_SCL_1V8",
+		"AP_I2C_PMIC_SAR_SDA_1V8",
+		"AP_I2C_EC_HID_KB_SCL_1V8",
+		"AP_I2C_EC_HID_KB_SDA_1V8",
+		"AP_I2C_UCAM_SCL_1V8",
+		"AP_I2C_UCAM_SDA_1V8",
+		"AP_I2C_WCAM_SCL_1V8",
+		"AP_I2C_WCAM_SDA_1V8",
+		"SPI_AP_CS_EC_L",
+		"SPI_AP_CLK_EC",
+		"SPI_AP_DO_EC_DI",
+		"SPI_AP_DI_EC_DO",
+		"TP",
+		"TP",
+		"SPI_AP_CS_TCHSCR_L",
+		"SPI_AP_CLK_TCHSCR",
+		"SPI_AP_DO_TCHSCR_DI",
+		"SPI_AP_DI_TCHSCR_DO",
+		"TP",
+		"TP",
+		"TP",
+		"TP",
+		"",
+		"",
+		"",
+		"TP",
+		"",
+		"SAR_INT_ODL",
+		"",
+		"",
+		"",
+		"PWRAP_SPI_CS_L",
+		"PWRAP_SPI_CK",
+		"PWRAP_SPI_MOSI",
+		"PWRAP_SPI_MISO",
+		"SRCLKENA0",
+		"SRCLKENA1",
+		"SCP_VREQ_VAO",
+		"AP_RTC_CLK32K",
+		"AP_PMIC_WDTRST_L",
+		"AUD_CLK_MOSI",
+		"AUD_SYNC_MOSI",
+		"AUD_DAT_MOSI0",
+		"AUD_DAT_MOSI1",
+		"AUD_DAT_MISO0",
+		"AUD_DAT_MISO1",
+		"SD_CD_ODL",
+		"HP_INT_ODL",
+		"SPKR_INT_ODL",
+		"I2S_HP_DATAIN",
+		"EN_SPKR",
+		"I2S_SPKR_MCLK",
+		"I2S_SPKR_BCLK",
+		"I2S_HP_MCLK",
+		"I2S_HP_BCLK",
+		"I2S_HP_LRCK",
+		"I2S_HP_DATAOUT",
+		"RST_SPKR_L",
+		"I2S_SPKR_LRCK",
+		"I2S_SPKR_DATAIN",
+		"",
+		"",
+		"",
+		"",
+		"SPI_AP_CLK_ROM",
+		"SPI_AP_CS_ROM_L",
+		"SPI_AP_DO_ROM_DI",
+		"SPI_AP_DI_ROM_DO",
+		"TP",
+		"TP",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"EN_PP2800A_UCAM_X",
+		"EN_PP1200_UCAM_X",
+		"EN_PP2800A_WCAM_X",
+		"EN_PP1100_WCAM_X",
+		"TCHSCR_INT_1V8_L",
+		"EN_PP3300_MIPI_TCHSCR_X",
+		"MT7921_PMU_EN_1V8",
+		"EN_PP3300_EDP_TCHSCR_X",
+		"AP_EC_WARM_RST_REQ",
+		"EC_AP_HID_INT_ODL",
+		"EC_AP_INT_ODL",
+		"AP_XHCI_INIT_DONE",
+		"EMMC_DAT7",
+		"EMMC_DAT6",
+		"EMMC_DAT5",
+		"EMMC_DAT4",
+		"EMMC_RST_L",
+		"EMMC_CMD",
+		"EMMC_CLK",
+		"EMMC_DAT3",
+		"EMMC_DAT2",
+		"EMMC_DAT1",
+		"EMMC_DAT0",
+		"EMMC_DSL",
+		"SD_CMD",
+		"SD_CLK",
+		"SD_DAT0",
+		"SD_DAT1",
+		"SD_DAT2",
+		"SD_DAT3",
+		"",
+		"",
+		"USB3_HUB_RST_L",
+		"EC_AP_RSVD0_ODL",
+		"",
+		"",
+		"SPMI_SCL",
+		"SPMI_SDA";
+
+	adsp_uart_pins: adsp-uart-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
+				 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
+		};
+	};
+
+	aud_etdm_hp_on: aud-etdm-hp-on-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>,
+				 <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>,
+				 <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>,
+				 <PINMUX_GPIO117__FUNC_O_I2SO2_D0>;
+		};
+	};
+
+	aud_etdm_hp_off: aud-etdm-hp-off-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO110__FUNC_B_GPIO110>,
+				 <PINMUX_GPIO115__FUNC_B_GPIO115>,
+				 <PINMUX_GPIO116__FUNC_B_GPIO116>,
+				 <PINMUX_GPIO117__FUNC_B_GPIO117>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	aud_etdm_spk_on: aud-etdm-spk-on-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO11__FUNC_O_I2SO1_D0>,
+				 <PINMUX_GPIO113__FUNC_B0_TDMIN_BCK>,
+				 <PINMUX_GPIO119__FUNC_B0_TDMIN_LRCK>,
+				 <PINMUX_GPIO120__FUNC_I0_TDMIN_DI>;
+			drive-strength = <8>;
+		};
+	};
+
+	aud_etdm_spk_off: aud-etdm-spk-off-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO11__FUNC_B_GPIO11>,
+				 <PINMUX_GPIO113__FUNC_B_GPIO113>,
+				 <PINMUX_GPIO119__FUNC_B_GPIO119>,
+				 <PINMUX_GPIO120__FUNC_B_GPIO120>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	aud_mtkaif_on: aud-mtkaif-on-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>;
+		};
+	};
+
+	aud_mtkaif_off: aud-mtkaif-off-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO101__FUNC_B_GPIO101>,
+				 <PINMUX_GPIO102__FUNC_B_GPIO102>,
+				 <PINMUX_GPIO103__FUNC_B_GPIO103>,
+				 <PINMUX_GPIO104__FUNC_B_GPIO104>,
+				 <PINMUX_GPIO105__FUNC_B_GPIO105>,
+				 <PINMUX_GPIO106__FUNC_B_GPIO106>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	cros_ec_int: cros-ec-int-pins {
+		pins-ec-ap-int-odl {
+			pinmux = <PINMUX_GPIO149__FUNC_B_GPIO149>;
+			input-enable;
+		};
+	};
+
+	disp_pwm0_pins: disp-pwm0-pins {
+		pins-disp-pwm0 {
+			pinmux = <PINMUX_GPIO29__FUNC_O_DISP_PWM0>;
+			output-high;
+		};
+	};
+
+	disp_pwm1_pins: disp-pwm1-pins {
+		pins-disp-pwm1 {
+			pinmux = <PINMUX_GPIO30__FUNC_O_DISP_PWM1>;
+			output-high;
+		};
+	};
+
+	dp_tx_hpd: dp-tx-hpd-pins {
+		pins-dp-tx-hpd {
+			pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>;
+		};
+	};
+
+	gsc_int: gsc-int-pins {
+		pins-gsc-ap-int-odl {
+			pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-disable;
+			drive-strength = <12>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+		};
+	};
+
+	mipi_disp_avdd_en: mipi-disp-avdd-en-pins {
+		pins-en-ppvar-mipi-disp {
+			pinmux = <PINMUX_GPIO3__FUNC_B_GPIO3>;
+			output-low;
+		};
+	};
+
+	mipi_disp_avee_en: mipi-disp-avee-en-pins {
+		pins-en-ppvar-mipi-disp-150ma {
+			pinmux = <PINMUX_GPIO4__FUNC_B_GPIO4>;
+			output-low;
+		};
+	};
+
+	mipi_dsi_pins: mipi-dsi-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO1__FUNC_B_GPIO1>,
+				 <PINMUX_GPIO25__FUNC_B_GPIO25>;
+			output-low;
+		};
+	};
+
+	mmc0_pins_default: mmc0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins: nor-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
+				 <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
+				 <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
+			bias-pull-down;
+		};
+
+		pins-cs {
+			pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>;
+			bias-pull-up;
+		};
+	};
+
+	pcie_pins: pcie-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
+				 <PINMUX_GPIO48__FUNC_O_PERSTN>,
+				 <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
+		};
+	};
+
+	scp_pins: scp-pins {
+		pins-scp-vreq {
+			pinmux = <PINMUX_GPIO98__FUNC_O_SCP_VREQ_VAO>;
+			bias-disable;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins_default: spi1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins_sleep: spi1-sleep-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO75__FUNC_B_GPIO75>,
+				 <PINMUX_GPIO76__FUNC_B_GPIO76>,
+				 <PINMUX_GPIO77__FUNC_B_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_B_GPIO78>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+
+	wlan_en: wlan-en-pins {
+		pins-en-pp3300-wlan {
+			pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
+			output-low;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&postmask0_in {
+	remote-endpoint = <&gamma0_out>;
+};
+
+&postmask0_out {
+	remote-endpoint = <&dither0_in>;
+};
+
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+	firmware-name = "mediatek/mt8188/scp.img";
+	memory-region = <&scp_mem_reserved>;
+	status = "okay";
+};
+
+&sound {
+	pinctrl-names = "aud_etdm_hp_on", "aud_etdm_hp_off",
+			"aud_etdm_spk_on", "aud_etdm_spk_off",
+			"aud_mtkaif_on", "aud_mtkaif_off";
+	pinctrl-0 = <&aud_etdm_hp_on>;
+	pinctrl-1 = <&aud_etdm_hp_off>;
+	pinctrl-2 = <&aud_etdm_spk_on>;
+	pinctrl-3 = <&aud_etdm_spk_off>;
+	pinctrl-4 = <&aud_mtkaif_on>;
+	pinctrl-5 = <&aud_mtkaif_off>;
+	mediatek,adsp = <&adsp>;
+	/* The audio-routing is defined in each board dts */
+
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupts-extended = <&pio 149 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cros_ec_int>;
+		spi-max-frequency = <3000000>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		cbas {
+			compatible = "google,cros-cbas";
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_pins_default>;
+	pinctrl-1 = <&spi1_pins_sleep>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+/* USB detachable base */
+&ssusb0 {
+	dr_mode = "host";
+	vusb33-supply = <&pp3300_s3>;
+	status = "okay";
+};
+
+&xhci0 {
+	/* controlled by EC */
+	vbus-supply = <&pp3300_z1>;
+	status = "okay";
+};
+
+/* USB3 hub */
+&ssusb1 {
+	dr_mode = "host";
+	vusb33-supply = <&pp3300_s3>;
+	status = "okay";
+};
+
+&xhci1 {
+	vusb33-supply = <&pp3300_s3>;
+	vbus-supply = <&pp5000_usb_vbus>;
+	status = "okay";
+};
+
+/* USB BT */
+&ssusb2 {
+	dr_mode = "host";
+	vusb33-supply = <&pp3300_s3>;
+	status = "okay";
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
+&vdosys1 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys1_ep_ext: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ethdr0_in>;
+		};
+	};
+};
+
+&xhci2 {
+	/* no power supply since MT7921's power is controlled by PCIe */
+	/* MT7921's USB BT has issues with USB2 LPM */
+	usb2-lpm-disable;
+	status = "okay";
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x01, 0x04, KEY_MICMUTE)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
new file mode 100644
index 000000000000..90c388f1890f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -0,0 +1,3555 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 MediaTek Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/mediatek,mt8188-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mailbox/mediatek,mt8188-gce.h>
+#include <dt-bindings/memory/mediatek,mt8188-memory-port.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/power/mediatek,mt8188-power.h>
+#include <dt-bindings/reset/mt8188-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
+
+/ {
+	compatible = "mediatek,mt8188";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		dp-intf0 = &dp_intf0;
+		dp-intf1 = &dp_intf1;
+		dsc0 = &dsc0;
+		ethdr0 = &ethdr0;
+		gce0 = &gce0;
+		gce1 = &gce1;
+		merge0 = &merge0;
+		merge1 = &merge1;
+		merge2 = &merge2;
+		merge3 = &merge3;
+		merge4 = &merge4;
+		merge5 = &merge5;
+		mutex0 = &mutex0;
+		mutex1 = &mutex1;
+		padding0 = &padding0;
+		padding1 = &padding1;
+		padding2 = &padding2;
+		padding3 = &padding3;
+		padding4 = &padding4;
+		padding5 = &padding5;
+		padding6 = &padding6;
+		padding7 = &padding7;
+		vdo1-rdma0 = &vdo1_rdma0;
+		vdo1-rdma1 = &vdo1_rdma1;
+		vdo1-rdma2 = &vdo1_rdma2;
+		vdo1-rdma3 = &vdo1_rdma3;
+		vdo1-rdma4 = &vdo1_rdma4;
+		vdo1-rdma5 = &vdo1_rdma5;
+		vdo1-rdma6 = &vdo1_rdma6;
+		vdo1-rdma7 = &vdo1_rdma7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x600>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x700>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <95>;
+				min-residency-us = <580>;
+			};
+
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <45>;
+				exit-latency-us = <140>;
+				min-residency-us = <740>;
+			};
+
+			cluster_off_l: cluster-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <55>;
+				exit-latency-us = <155>;
+				min-residency-us = <840>;
+			};
+
+			cluster_off_b: cluster-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <200>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-unified;
+		};
+	};
+
+	clk13m: oscillator-13m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <13000000>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-390000000 {
+			opp-hz = /bits/ 64 <390000000>;
+			opp-microvolt = <575000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-431000000 {
+			opp-hz = /bits/ 64 <431000000>;
+			opp-microvolt = <587500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-473000000 {
+			opp-hz = /bits/ 64 <473000000>;
+			opp-microvolt = <600000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-515000000 {
+			opp-hz = /bits/ 64 <515000000>;
+			opp-microvolt = <612500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-556000000 {
+			opp-hz = /bits/ 64 <556000000>;
+			opp-microvolt = <625000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <637500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-640000000 {
+			opp-hz = /bits/ 64 <640000000>;
+			opp-microvolt = <650000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-670000000 {
+			opp-hz = /bits/ 64 <670000000>;
+			opp-microvolt = <662500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <675000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-730000000 {
+			opp-hz = /bits/ 64 <730000000>;
+			opp-microvolt = <687500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-760000000 {
+			opp-hz = /bits/ 64 <760000000>;
+			opp-microvolt = <700000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-790000000 {
+			opp-hz = /bits/ 64 <790000000>;
+			opp-microvolt = <712500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-835000000 {
+			opp-hz = /bits/ 64 <835000000>;
+			opp-microvolt = <731250>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-880000000 {
+			opp-hz = /bits/ 64 <880000000>;
+			opp-microvolt = <750000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-915000000 {
+			opp-hz = /bits/ 64 <915000000>;
+			opp-microvolt = <775000>;
+			opp-supported-hw = <0x8f>;
+		};
+		opp-915000000-5 {
+			opp-hz = /bits/ 64 <915000000>;
+			opp-microvolt = <762500>;
+			opp-supported-hw = <0x30>;
+		};
+		opp-915000000-6 {
+			opp-hz = /bits/ 64 <915000000>;
+			opp-microvolt = <750000>;
+			opp-supported-hw = <0x70>;
+		};
+		opp-950000000 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <800000>;
+			opp-supported-hw = <0x8f>;
+		};
+		opp-950000000-5 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <775000>;
+			opp-supported-hw = <0x30>;
+		};
+		opp-950000000-6 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <750000>;
+			opp-supported-hw = <0x70>;
+		};
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	sound: sound {
+		mediatek,platform = <&afe>;
+		status = "disabled";
+	};
+
+	thermal_zones: thermal-zones {
+		cpu-little0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu_little0_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little0_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu_little0_cooling_map0: map0 {
+					trip = <&cpu_little0_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-little1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu_little1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu_little1_cooling_map0: map0 {
+					trip = <&cpu_little1_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-little2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu_little2_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little2_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu_little2_cooling_map0: map0 {
+					trip = <&cpu_little2_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-little3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu_little3_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little3_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu_little3_cooling_map0: map0 {
+					trip = <&cpu_little3_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-big0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU0>;
+
+			trips {
+				cpu_big0_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_big0_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_big0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_big0_alert0>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-big1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU1>;
+
+			trips {
+				cpu_big1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_big1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_big1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_big1_alert0>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		apu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_APU>;
+
+			trips {
+				apu_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				apu_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				apu_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_GPU0>;
+
+			trips {
+				gpu_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_GPU1>;
+
+			trips {
+				gpu1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		adsp-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_ADSP>;
+
+			trips {
+				soc_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				soc_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		vdo-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_VDO>;
+
+			trips {
+				soc1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				soc1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		infra-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_INFRA>;
+
+			trips {
+				soc2_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc2_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				soc2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_CAM1>;
+
+			trips {
+				cam1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cam1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_CAM2>;
+
+			trips {
+				cam2_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam2_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cam2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clock-frequency = <13000000>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>;
+		ranges;
+
+		performance: performance-controller@11bc10 {
+			compatible = "mediatek,cpufreq-hw";
+			reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+			#performance-domain-cells = <1>;
+		};
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8188-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: syscon@10001000 {
+			compatible = "mediatek,mt8188-infracfg-ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8188-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8188-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11c00000 0 0x1000>,
+			      <0 0x11e10000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11ea0000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_rm", "iocfg_lt",
+				    "iocfg_lm", "iocfg_rt", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 176>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8188-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8188-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				mfg0: power-domain@MT8188_POWER_DOMAIN_MFG0 {
+					reg = <MT8188_POWER_DOMAIN_MFG0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					mfg1: power-domain@MT8188_POWER_DOMAIN_MFG1 {
+						reg = <MT8188_POWER_DOMAIN_MFG1>;
+						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
+							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
+						clock-names = "mfg", "alt";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8188_POWER_DOMAIN_MFG2 {
+							reg = <MT8188_POWER_DOMAIN_MFG2>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_MFG3 {
+							reg = <MT8188_POWER_DOMAIN_MFG3>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_MFG4 {
+							reg = <MT8188_POWER_DOMAIN_MFG4>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_VPPSYS0 {
+					reg = <MT8188_POWER_DOMAIN_VPPSYS0>;
+					clocks = <&topckgen CLK_TOP_VPP>,
+						 <&topckgen CLK_TOP_CAM>,
+						 <&topckgen CLK_TOP_CCU>,
+						 <&topckgen CLK_TOP_IMG>,
+						 <&topckgen CLK_TOP_VENC>,
+						 <&topckgen CLK_TOP_VDEC>,
+						 <&topckgen CLK_TOP_WPE_VPP>,
+						 <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VPP0>,
+						 <&topckgen CLK_TOP_CFGREG_F26M_VPP0>,
+						 <&vppsys0 CLK_VPP0_SMI_COMMON_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VENCSYS_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VENCSYS_CORE1_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_INFRA_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_CAMSYS_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_SMI_REORDER_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_SMI_IOMMU>,
+						 <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>,
+						 <&vppsys0 CLK_VPP0_GALS_EMI0_EMI1>,
+						 <&vppsys0 CLK_VPP0_SMI_SUB_COMMON_REORDER>,
+						 <&vppsys0 CLK_VPP0_SMI_RSI>,
+						 <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+						 <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_WPESYS>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
+					clock-names = "top", "cam", "ccu", "img", "venc",
+						      "vdec", "wpe", "cfgck", "cfgxo",
+						      "ss-sram-cmn", "ss-sram-v0l0", "ss-sram-v0l1",
+						      "ss-sram-ve0", "ss-sram-ve1", "ss-sram-ifa",
+						      "ss-sram-cam", "ss-sram-v1l5", "ss-sram-v1l6",
+						      "ss-sram-rdr", "ss-iommu", "ss-imgcam",
+						      "ss-emi", "ss-subcmn-rdr", "ss-rsi",
+						      "ss-cmn-l4", "ss-vdec1", "ss-wpe",
+						      "ss-cvdo-ve1";
+					mediatek,infracfg = <&infracfg_ao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8188_POWER_DOMAIN_VDOSYS0 {
+						reg = <MT8188_POWER_DOMAIN_VDOSYS0>;
+						clocks = <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VDO0>,
+							 <&topckgen CLK_TOP_CFGREG_F26M_VDO0>,
+							 <&vdosys0 CLK_VDO0_SMI_GALS>,
+							 <&vdosys0 CLK_VDO0_SMI_COMMON>,
+							 <&vdosys0 CLK_VDO0_SMI_EMI>,
+							 <&vdosys0 CLK_VDO0_SMI_IOMMU>,
+							 <&vdosys0 CLK_VDO0_SMI_LARB>,
+							 <&vdosys0 CLK_VDO0_SMI_RSI>,
+							 <&vdosys0 CLK_VDO0_APB_BUS>;
+						clock-names = "cfgck", "cfgxo", "ss-gals",
+							      "ss-cmn", "ss-emi", "ss-iommu",
+							      "ss-larb", "ss-rsi", "ss-bus";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8188_POWER_DOMAIN_VPPSYS1 {
+							reg = <MT8188_POWER_DOMAIN_VPPSYS1>;
+							clocks = <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VPP1>,
+								 <&topckgen CLK_TOP_CFGREG_F26M_VPP1>,
+								 <&vppsys1 CLK_VPP1_GALS5>,
+								 <&vppsys1 CLK_VPP1_GALS6>,
+								 <&vppsys1 CLK_VPP1_LARB5>,
+								 <&vppsys1 CLK_VPP1_LARB6>;
+							clock-names = "cfgck", "cfgxo",
+								      "ss-vpp1-g5", "ss-vpp1-g6",
+								      "ss-vpp1-l5", "ss-vpp1-l6";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_VDEC0 {
+							reg = <MT8188_POWER_DOMAIN_VDEC0>;
+							clocks = <&vdecsys_soc CLK_VDEC1_SOC_LARB1>;
+							clock-names = "ss-vdec1-soc-l1";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8188_POWER_DOMAIN_VDEC1 {
+								reg = <MT8188_POWER_DOMAIN_VDEC1>;
+								clocks = <&vdecsys CLK_VDEC2_LARB1>;
+								clock-names = "ss-vdec2-l1";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+						};
+
+						cam_vcore: power-domain@MT8188_POWER_DOMAIN_CAM_VCORE {
+							reg = <MT8188_POWER_DOMAIN_CAM_VCORE>;
+							clocks = <&topckgen CLK_TOP_CAM>,
+								 <&topckgen CLK_TOP_CCU>,
+								 <&topckgen CLK_TOP_CCU_AHB>,
+								 <&topckgen CLK_TOP_CFGREG_CLOCK_ISP_AXI_GALS>;
+							clock-names = "cam", "ccu", "bus", "cfgck";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8188_POWER_DOMAIN_CAM_MAIN {
+								reg = <MT8188_POWER_DOMAIN_CAM_MAIN>;
+								clocks = <&camsys CLK_CAM_MAIN_LARB13>,
+									 <&camsys CLK_CAM_MAIN_LARB14>,
+									 <&camsys CLK_CAM_MAIN_CAM2MM0_GALS>,
+									 <&camsys CLK_CAM_MAIN_CAM2MM1_GALS>,
+									 <&camsys CLK_CAM_MAIN_CAM2SYS_GALS>;
+								clock-names= "ss-cam-l13", "ss-cam-l14",
+									     "ss-cam-mm0", "ss-cam-mm1",
+									     "ss-camsys";
+								mediatek,infracfg = <&infracfg_ao>;
+								#address-cells = <1>;
+								#size-cells = <0>;
+								#power-domain-cells = <1>;
+
+								power-domain@MT8188_POWER_DOMAIN_CAM_SUBB {
+									reg = <MT8188_POWER_DOMAIN_CAM_SUBB>;
+									clocks = <&camsys CLK_CAM_MAIN_CAM_SUBB>,
+										 <&camsys_rawb CLK_CAM_RAWB_LARBX>,
+										 <&camsys_yuvb CLK_CAM_YUVB_LARBX>;
+									clock-names = "ss-camb-sub",
+										      "ss-camb-raw",
+										      "ss-camb-yuv";
+									#power-domain-cells = <0>;
+								};
+
+								power-domain@MT8188_POWER_DOMAIN_CAM_SUBA {
+									reg =<MT8188_POWER_DOMAIN_CAM_SUBA>;
+									clocks = <&camsys CLK_CAM_MAIN_CAM_SUBA>,
+										 <&camsys_rawa CLK_CAM_RAWA_LARBX>,
+										 <&camsys_yuva CLK_CAM_YUVA_LARBX>;
+									clock-names = "ss-cama-sub",
+										      "ss-cama-raw",
+										      "ss-cama-yuv";
+									#power-domain-cells = <0>;
+								};
+							};
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_VDOSYS1 {
+							reg = <MT8188_POWER_DOMAIN_VDOSYS1>;
+							clocks = <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VDO1>,
+								 <&topckgen CLK_TOP_CFGREG_F26M_VDO1>,
+								 <&vdosys1 CLK_VDO1_SMI_LARB2>,
+								 <&vdosys1 CLK_VDO1_SMI_LARB3>,
+								 <&vdosys1 CLK_VDO1_GALS>;
+							clock-names = "cfgck", "cfgxo", "ss-larb2",
+								      "ss-larb3", "ss-gals";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8188_POWER_DOMAIN_HDMI_TX {
+								reg = <MT8188_POWER_DOMAIN_HDMI_TX>;
+								clocks = <&topckgen CLK_TOP_HDMI_APB>,
+									 <&topckgen CLK_TOP_HDCP_24M>;
+								clock-names = "bus", "hdcp";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8188_POWER_DOMAIN_DP_TX {
+								reg = <MT8188_POWER_DOMAIN_DP_TX>;
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8188_POWER_DOMAIN_EDP_TX {
+								reg = <MT8188_POWER_DOMAIN_EDP_TX>;
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_VENC {
+							reg = <MT8188_POWER_DOMAIN_VENC>;
+							clocks = <&vencsys CLK_VENC1_LARB>,
+								 <&vencsys CLK_VENC1_VENC>,
+								 <&vencsys CLK_VENC1_GALS>,
+								 <&vencsys CLK_VENC1_GALS_SRAM>;
+							clock-names = "ss-ve1-larb", "ss-ve1-core",
+								      "ss-ve1-gals", "ss-ve1-sram";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_WPE {
+							reg = <MT8188_POWER_DOMAIN_WPE>;
+							clocks = <&wpesys CLK_WPE_TOP_SMI_LARB7>,
+								 <&wpesys CLK_WPE_TOP_SMI_LARB7_PCLK_EN>;
+							clock-names = "ss-wpe-l7", "ss-wpe-l7pce";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_PEXTP_MAC_P0 {
+					reg = <MT8188_POWER_DOMAIN_PEXTP_MAC_P0>;
+					mediatek,infracfg = <&infracfg_ao>;
+					clocks = <&pericfg_ao CLK_PERI_AO_PCIE_P0_FMEM>;
+					clock-names = "ss-pextp-fmem";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_CSIRX_TOP {
+					reg = <MT8188_POWER_DOMAIN_CSIRX_TOP>;
+					clocks = <&topckgen CLK_TOP_SENINF>,
+						 <&topckgen CLK_TOP_SENINF1>;
+					clock-names = "seninf0", "seninf1";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_PEXTP_PHY_TOP {
+					reg = <MT8188_POWER_DOMAIN_PEXTP_PHY_TOP>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_ADSP_AO {
+					reg = <MT8188_POWER_DOMAIN_ADSP_AO>;
+					clocks = <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+						 <&topckgen CLK_TOP_ADSP>;
+					clock-names = "bus", "main";
+					mediatek,infracfg = <&infracfg_ao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8188_POWER_DOMAIN_ADSP_INFRA {
+						reg = <MT8188_POWER_DOMAIN_ADSP_INFRA>;
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8188_POWER_DOMAIN_AUDIO_ASRC {
+							reg = <MT8188_POWER_DOMAIN_AUDIO_ASRC>;
+							clocks = <&topckgen CLK_TOP_ASM_H>;
+							clock-names = "asm";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_AUDIO {
+							reg = <MT8188_POWER_DOMAIN_AUDIO>;
+							clocks = <&topckgen CLK_TOP_A1SYS_HP>,
+								 <&topckgen CLK_TOP_AUD_INTBUS>,
+								 <&adsp_audio26m CLK_AUDIODSP_AUDIO26M>;
+							clock-names = "a1sys", "intbus", "adspck";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_ADSP {
+							reg = <MT8188_POWER_DOMAIN_ADSP>;
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_ETHER {
+					reg = <MT8188_POWER_DOMAIN_ETHER>;
+					clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
+					clock-names = "ethermac";
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <0>;
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8188-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			mediatek,disable-extrst;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8188-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8188-timer", "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		pwrap: pwrap@10024000 {
+			compatible = "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap", "syscon";
+			reg = <0 0x10024000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+		};
+
+		spmi: spmi@10027000 {
+			compatible = "mediatek,mt8188-spmi", "mediatek,mt8195-spmi";
+			reg = <0 0x10027000 0 0xe00>, <0 0x10029000 0 0x100>;
+			reg-names = "pmif", "spmimst";
+			assigned-clocks = <&topckgen CLK_TOP_SPMI_M_MST>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>,
+				 <&topckgen CLK_TOP_SPMI_M_MST>;
+			clock-names = "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux";
+		};
+
+		infra_iommu: iommu@10315000 {
+			compatible = "mediatek,mt8188-iommu-infra";
+			reg = <0 0x10315000 0 0x1000>;
+			interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH 0>;
+			#iommu-cells = <1>;
+		};
+
+		gce0: mailbox@10320000 {
+			compatible = "mediatek,mt8188-gce";
+			reg = <0 0x10320000 0 0x4000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE>;
+		};
+
+		gce1: mailbox@10330000 {
+			compatible = "mediatek,mt8188-gce";
+			reg = <0 0x10330000 0 0x4000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE2>;
+		};
+
+		scp_cluster: scp@10720000 {
+			compatible = "mediatek,mt8188-scp-dual";
+			reg = <0 0x10720000 0 0xe0000>;
+			reg-names = "cfg";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x10500000 0x100000>;
+			status = "disabled";
+
+			scp_c0: scp@0 {
+				compatible = "mediatek,scp-core";
+				reg = <0x0 0xd0000>;
+				reg-names = "sram";
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+				status = "disabled";
+			};
+
+			scp_c1: scp@d0000 {
+				compatible = "mediatek,scp-core";
+				reg = <0xd0000 0x2f000>;
+				reg-names = "sram";
+				interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
+				status = "disabled";
+			};
+		};
+
+		afe: audio-controller@10b10000 {
+			compatible = "mediatek,mt8188-afe";
+			reg = <0 0x10b10000 0 0x10000>;
+			assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP>;
+			assigned-clock-parents = <&topckgen CLK_TOP_APLL1_D4>;
+			clocks = <&clk26m>,
+				 <&apmixedsys CLK_APMIXED_APLL1>,
+				 <&apmixedsys CLK_APMIXED_APLL2>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV0>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV1>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV2>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV3>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV9>,
+				 <&topckgen CLK_TOP_A1SYS_HP>,
+				 <&topckgen CLK_TOP_AUD_INTBUS>,
+				 <&topckgen CLK_TOP_AUDIO_H>,
+				 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+				 <&topckgen CLK_TOP_DPTX>,
+				 <&topckgen CLK_TOP_I2SO1>,
+				 <&topckgen CLK_TOP_I2SO2>,
+				 <&topckgen CLK_TOP_I2SI1>,
+				 <&topckgen CLK_TOP_I2SI2>,
+				 <&adsp_audio26m CLK_AUDIODSP_AUDIO26M>,
+				 <&topckgen CLK_TOP_APLL1_D4>,
+				 <&topckgen CLK_TOP_APLL2_D4>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV4>,
+				 <&topckgen CLK_TOP_A2SYS>,
+				 <&topckgen CLK_TOP_AUD_IEC>;
+			clock-names = "clk26m",
+				      "apll1",
+				      "apll2",
+				      "apll12_div0",
+				      "apll12_div1",
+				      "apll12_div2",
+				      "apll12_div3",
+				      "apll12_div9",
+				      "top_a1sys_hp",
+				      "top_aud_intbus",
+				      "top_audio_h",
+				      "top_audio_local_bus",
+				      "top_dptx",
+				      "top_i2so1",
+				      "top_i2so2",
+				      "top_i2si1",
+				      "top_i2si2",
+				      "adsp_audio_26m",
+				      "apll1_d4",
+				      "apll2_d4",
+				      "apll12_div4",
+				      "top_a2sys",
+				      "top_aud_iec";
+			interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_AUDIO>;
+			resets = <&watchdog MT8188_TOPRGU_AUDIO_SW_RST>;
+			reset-names = "audiosys";
+			mediatek,infracfg = <&infracfg_ao>;
+			mediatek,topckgen = <&topckgen>;
+			status = "disabled";
+		};
+
+		adsp: adsp@10b80000 {
+			compatible = "mediatek,mt8188-dsp";
+			reg = <0 0x10b80000 0 0x2000>,
+			      <0 0x10d00000 0 0x80000>,
+			      <0 0x10b8b000 0 0x100>,
+			      <0 0x10b8f000 0 0x1000>;
+			reg-names = "cfg", "sram", "sec", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_ADSP>;
+			clocks = <&topckgen CLK_TOP_ADSP>,
+				 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>;
+			clock-names = "audiodsp", "adsp_bus";
+			mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+			mbox-names = "rx", "tx";
+			power-domains = <&spm MT8188_POWER_DOMAIN_ADSP>;
+			status = "disabled";
+		};
+
+		adsp_mailbox0: mailbox@10b86100 {
+			compatible = "mediatek,mt8188-adsp-mbox", "mediatek,mt8186-adsp-mbox";
+			reg = <0 0x10b86100 0 0x1000>;
+			interrupts = <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <0>;
+		};
+
+		adsp_mailbox1: mailbox@10b87100 {
+			compatible = "mediatek,mt8188-adsp-mbox", "mediatek,mt8186-adsp-mbox";
+			reg = <0 0x10b87100 0 0x1000>;
+			interrupts = <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <0>;
+		};
+
+		adsp_audio26m: clock-controller@10b91100 {
+			compatible = "mediatek,mt8188-adsp-audio26m";
+			reg = <0 0x10b91100 0 0x100>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial@11001100 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001100 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11001200 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001200 0 0x100>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11001300 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001300 0 0x100>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart3: serial@11001400 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001400 0 0x100>;
+			interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		auxadc: adc@11002000 {
+			compatible = "mediatek,mt8188-auxadc", "mediatek,mt8173-auxadc";
+			reg = <0 0x11002000 0 0x1000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pericfg_ao: syscon@11003000 {
+			compatible = "mediatek,mt8188-pericfg-ao", "syscon";
+			reg = <0 0x11003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8188-lvts-ap";
+			reg = <0 0x1100b000 0 0xc00>;
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8188_INFRA_RST1_THERMAL_CTRL_RST>;
+			nvmem-cells = <&lvts_efuse_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
+		disp_pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8188-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM0>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM>;
+			clock-names = "main", "mm";
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		disp_pwm1: pwm@1100f000 {
+			compatible = "mediatek,mt8188-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100f000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM1>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM1>;
+			clock-names = "main", "mm";
+			interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11018000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11019000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11019000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		ssusb1: usb@11201000 {
+			compatible = "mediatek,mt8188-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2dff>, <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			ranges = <0 0 0 0x11200000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x468 2>;
+			status = "disabled";
+
+			xhci1: usb@0 {
+				compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
+		};
+
+		eth: ethernet@11021000 {
+			compatible = "mediatek,mt8188-gmac", "mediatek,mt8195-gmac",
+				     "snps,dwmac-5.10a";
+			reg = <0 0x11021000 0 0x4000>;
+			interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "macirq";
+			clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>,
+				 <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>,
+				 <&topckgen CLK_TOP_SNPS_ETH_250M>,
+				 <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+				 <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>,
+				 <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
+			clock-names = "axi", "apb", "mac_main", "ptp_ref",
+				      "rmii_internal", "mac_cg";
+			assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>,
+					  <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+					  <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>,
+						 <&topckgen CLK_TOP_ETHPLL_D8>,
+						 <&topckgen CLK_TOP_ETHPLL_D10>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_ETHER>;
+			mediatek,pericfg = <&infracfg_ao>;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup>;
+			snps,mtl-tx-config = <&mtl_tx_setup>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			eth_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			stmmac_axi_setup: stmmac-axi-config {
+				snps,blen = <0 0 0 0 16 8 4>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,wr_osr_lmt = <0x7>;
+			};
+
+			mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <4>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+			};
+
+			mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <4>;
+				snps,tx-sched-wrr;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x0>;
+					snps,weight = <0x10>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,weight = <0x11>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,weight = <0x12>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x3>;
+					snps,weight = <0x13>;
+				};
+			};
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x10000>,
+			      <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>,
+				 <&infracfg_ao CLK_INFRA_AO_RG_AES_MSDCFDE_CK_0P>;
+			clock-names = "source", "hclk", "source_cg", "crypto_clk";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11eb0000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11250000 0 0x1000>,
+			      <0 0x11e60000 0 0x1000>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_2>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC2>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC30_2>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_2>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8188-lvts-mcu";
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8188_INFRA_RST1_THERMAL_MCU_RST>;
+			nvmem-cells = <&lvts_efuse_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
+		i2c0: i2c@11280000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11280000 0 0x1000>,
+			      <0 0x10220080 0 0x80>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C0>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11281000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11281000 0 0x1000>,
+			      <0 0x10220180 0 0x80>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C2>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11282000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11282000 0 0x1000>,
+			      <0 0x10220280 0 0x80>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C3>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_c: clock-controller@11283000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-c";
+			reg = <0 0x11283000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ssusb2: usb@112a1000 {
+			compatible = "mediatek,mt8188-mtu3", "mediatek,mtu3";
+			reg = <0 0x112a1000 0 0x2dff>, <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			ranges = <0 0 0 0x112a0000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P3_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x470 2>;
+			status = "disabled";
+
+			xhci2: usb@0 {
+				compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
+		};
+
+		ssusb0: usb@112b1000 {
+			compatible = "mediatek,mt8188-mtu3", "mediatek,mtu3";
+			reg = <0 0x112b1000 0 0x2dff>, <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			ranges = <0 0 0 0x112b0000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P2_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port0 PHY_TYPE_USB2>;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x460 2>;
+			status = "disabled";
+
+			xhci0: usb@0 {
+				compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
+		};
+
+		pcie: pcie@112f0000 {
+			compatible = "mediatek,mt8188-pcie", "mediatek,mt8192-pcie";
+			reg = <0 0x112f0000 0 0x2000>;
+			reg-names = "pcie-mac";
+			ranges = <0x82000000 0 0x20000000 0 0x20000000 0 0x4000000>;
+			bus-range = <0 0xff>;
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P0>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_26M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_32K>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_FMEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m", "tl_32k",
+				      "peri_26m", "peri_mem";
+
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			interrupt-map-mask = <0 0 0 7>;
+
+			iommu-map = <0 &infra_iommu IFR_IOMMU_PORT_PCIE_0 0xffff>;
+			iommu-map-mask = <0>;
+
+			phys = <&pcieport PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+
+			power-domains = <&spm MT8188_POWER_DOMAIN_PEXTP_MAC_P0>;
+
+			resets = <&watchdog MT8188_TOPRGU_PCIE_SW_RST>;
+			reset-names = "mac";
+
+			status = "disabled";
+
+			pcie_intc: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		nor_flash: spi@1132c000 {
+			compatible = "mediatek,mt8188-nor", "mediatek,mt8186-nor";
+			reg = <0 0x1132c000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_SPINOR>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIFLASHCK>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>;
+			clock-names = "spi", "sf", "axi";
+			assigned-clocks = <&topckgen CLK_TOP_SPINOR>;
+			interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pciephy: t-phy@11c20700 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			ranges = <0 0 0x11c20700 0x700>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_PEXTP_PHY_TOP>;
+			status = "disabled";
+
+			pcieport: pcie-phy@0 {
+				reg = <0 0x700>;
+				clocks = <&topckgen CLK_TOP_CFGREG_F_PCIE_PHY_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		mipi_tx_config0: dsi-phy@11c80000 {
+			compatible = "mediatek,mt8188-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c80000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx_config1: dsi-phy@11c90000 {
+			compatible = "mediatek,mt8188-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c90000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11e00000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e00000 0 0x1000>,
+			      <0 0x10220100 0 0x80>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C1>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11e01000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e01000 0 0x1000>,
+			      <0 0x10220380 0 0x80>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C4>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_w: clock-controller@11e02000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-w";
+			reg = <0 0x11e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		u3phy0: t-phy@11e30000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e30000 0x1000>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy1: t-phy@11e40000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e40000 0x1000>;
+			status = "disabled";
+
+			u2port1: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port1: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>,
+					 <&clk26m>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy2: t-phy@11e80000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e80000 0x1000>;
+			status = "disabled";
+
+			u2port2: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		i2c5: i2c@11ec0000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec0000 0 0x1000>,
+			      <0 0x10220480 0 0x80>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C5>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@11ec1000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec1000 0 0x1000>,
+			      <0 0x10220600 0 0x80>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C6>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_en: clock-controller@11ec2000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-en";
+			reg = <0 0x11ec2000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		efuse: efuse@11f20000 {
+			compatible = "mediatek,mt8188-efuse", "mediatek,mt8186-efuse";
+			reg = <0 0x11f20000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			dp_calib_data: dp-calib@1a0 {
+				reg = <0x1a0 0xc>;
+			};
+
+			lvts_efuse_data1: lvts1-calib@1ac {
+				reg = <0x1ac 0x40>;
+			};
+
+			gpu_speedbin: gpu-speedbin@581 {
+				reg = <0x581 0x1>;
+				bits = <0 3>;
+			};
+
+			socinfo-data1@7a0 {
+				reg = <0x7a0 0x4>;
+			};
+
+			socinfo-data2@7e0 {
+				reg = <0x7e0 0x4>;
+			};
+		};
+
+		gpu: gpu@13000000 {
+			compatible = "mediatek,mt8188-mali", "arm,mali-valhall-jm";
+			reg = <0 0x13000000 0 0x4000>;
+
+			clocks = <&mfgcfg CLK_MFGCFG_BG3D>;
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+			nvmem-cells = <&gpu_speedbin>;
+			nvmem-cell-names = "speed-bin";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_MFG2>,
+					<&spm MT8188_POWER_DOMAIN_MFG3>,
+					<&spm MT8188_POWER_DOMAIN_MFG4>;
+			power-domain-names = "core0", "core1", "core2";
+			#cooling-cells = <2>;
+			status = "disabled";
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt8188-mfgcfg";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys0: syscon@14000000 {
+			compatible = "mediatek,mt8188-vppsys0", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		dma-controller@14001000 {
+			compatible = "mediatek,mt8188-mdp3-rdma";
+			reg = <0 0x14001000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>;
+			mboxes = <&gce0 13 CMDQ_THR_PRIO_1>,
+				 <&gce0 14 CMDQ_THR_PRIO_1>,
+				 <&gce0 16 CMDQ_THR_PRIO_1>,
+				 <&gce0 21 CMDQ_THR_PRIO_1>,
+				 <&gce0 22 CMDQ_THR_PRIO_1>;
+			iommus = <&vpp_iommu M4U_PORT_L4_MDP_RDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>;
+			mediatek,scp = <&scp_c0>;
+		};
+
+		display@14002000 {
+			compatible = "mediatek,mt8188-mdp3-fg", "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+		};
+
+		display@14004000 {
+			compatible = "mediatek,mt8188-mdp3-hdr", "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14004000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+		};
+
+		display@14005000 {
+			compatible = "mediatek,mt8188-mdp3-aal", "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14005000 0 0x1000>;
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_AAL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x5000 0x1000>;
+		};
+
+		display@14006000 {
+			compatible = "mediatek,mt8188-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14006000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>;
+		};
+
+		display@14007000 {
+			compatible = "mediatek,mt8188-mdp3-tdshp", "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14007000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+		};
+
+		display@14008000 {
+			compatible = "mediatek,mt8188-mdp3-color", "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14008000 0 0x1000>;
+			interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_COLOR>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x8000 0x1000>;
+		};
+
+		display@14009000 {
+			compatible = "mediatek,mt8188-mdp3-ovl", "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_OVL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x9000 0x1000>;
+			iommus = <&vpp_iommu M4U_PORT_L4_MDP_OVL>;
+		};
+
+		display@1400a000 {
+			compatible = "mediatek,mt8188-mdp3-padding", "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x1400a000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_PADDING>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xa000 0x1000>;
+		};
+
+		display@1400b000 {
+			compatible = "mediatek,mt8188-mdp3-tcc", "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x1400b000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+		};
+
+		display@1400c000 {
+			compatible = "mediatek,mt8188-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x1400c000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_WROT>;
+			iommus = <&vpp_iommu M4U_PORT_L4_MDP_WROT>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>;
+		};
+
+		mutex@1400f000 {
+			compatible = "mediatek,mt8188-vpp-mutex";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MUTEX>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xf000 0x1000>;
+		};
+
+		vpp_smi_common: smi@14012000 {
+			compatible = "mediatek,mt8188-smi-common-vpp";
+			reg = <0 0x14012000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+				 <&vppsys0 CLK_VPP0_SMI_SUB_COMMON_REORDER>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		larb4: smi@14013000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x14013000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+				 <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,larb-id = <SMI_L4_ID>;
+			mediatek,smi = <&vpp_smi_common>;
+		};
+
+		vpp_iommu: iommu@14018000 {
+			compatible = "mediatek,mt8188-iommu-vpp";
+			reg = <0 0x14018000 0 0x5000>;
+			clocks = <&vppsys0 CLK_VPP0_SMI_IOMMU>;
+			clock-names = "bclk";
+			interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			#iommu-cells = <1>;
+			mediatek,larbs = <&larb1 &larb3 &larb4 &larb6 &larb7 &larb23>;
+		};
+
+		dma-controller@14f09000 {
+			compatible = "mediatek,mt8188-mdp3-rdma";
+			reg = <0 0x14f09000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RDMA>;
+			iommus = <&vdo_iommu M4U_PORT_L5_SVPP2_MDP_RDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x9000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE>;
+		};
+
+		dma-controller@14f0a000 {
+			compatible = "mediatek,mt8188-mdp3-rdma";
+			reg = <0 0x14f0a000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RDMA>;
+			iommus = <&vpp_iommu M4U_PORT_L6_SVPP3_MDP_RDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xa000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE>;
+		};
+
+		display@14f0c000 {
+			compatible = "mediatek,mt8188-mdp3-fg", "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0c000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_FG>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xc000 0x1000>;
+		};
+
+		display@14f0d000 {
+			compatible = "mediatek,mt8188-mdp3-fg", "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0d000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_FG>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xd000 0x1000>;
+		};
+
+		display@14f0f000 {
+			compatible = "mediatek,mt8188-mdp3-hdr", "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0f000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_HDR>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xf000 0x1000>;
+		};
+
+		display@14f10000 {
+			compatible = "mediatek,mt8188-mdp3-hdr", "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f10000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_HDR>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0 0x1000>;
+		};
+
+		display@14f12000 {
+			compatible = "mediatek,mt8188-mdp3-aal", "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f12000 0 0x1000>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_AAL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x2000 0x1000>;
+		};
+
+		display@14f13000 {
+			compatible = "mediatek,mt8188-mdp3-aal", "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f13000 0 0x1000>;
+			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_AAL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x3000 0x1000>;
+		};
+
+		display@14f15000 {
+			compatible = "mediatek,mt8188-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f15000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>;
+		};
+
+		display@14f16000 {
+			compatible = "mediatek,mt8188-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f16000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>;
+		};
+
+		display@14f18000 {
+			compatible = "mediatek,mt8188-mdp3-tdshp", "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f18000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_TDSHP>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x8000 0x1000>;
+		};
+
+		display@14f19000 {
+			compatible = "mediatek,mt8188-mdp3-tdshp", "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f19000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_TDSHP>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x9000 0x1000>;
+		};
+
+		display@14f1a000 {
+			compatible = "mediatek,mt8188-mdp3-merge", "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1a000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_MERGE>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xa000 0x1000>;
+		};
+
+		display@14f1b000 {
+			compatible = "mediatek,mt8188-mdp3-merge", "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1b000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_MERGE>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xb000 0x1000>;
+		};
+
+		display@14f1d000 {
+			compatible = "mediatek,mt8188-mdp3-color", "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1d000 0 0x1000>;
+			interrupts = <GIC_SPI 629 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_COLOR>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xd000 0x1000>;
+		};
+
+		display@14f1e000 {
+			compatible = "mediatek,mt8188-mdp3-color", "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1e000 0 0x1000>;
+			interrupts = <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_COLOR>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xe000 0x1000>;
+		};
+
+		display@14f21000 {
+			compatible = "mediatek,mt8188-mdp3-padding",
+				     "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f21000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_PAD>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x1000 0x1000>;
+		};
+
+		display@14f22000 {
+			compatible = "mediatek,mt8188-mdp3-padding",
+				     "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f22000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_PAD>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x2000 0x1000>;
+		};
+
+		display@14f24000 {
+			compatible = "mediatek,mt8188-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f24000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>;
+			iommus = <&vdo_iommu M4U_PORT_L5_SVPP2_MDP_WROT>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>;
+		};
+
+		display@14f25000 {
+			compatible = "mediatek,mt8188-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f25000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>;
+			iommus = <&vpp_iommu M4U_PORT_L6_SVPP3_MDP_WROT>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>;
+		};
+
+		wpesys: clock-controller@14e00000 {
+			compatible = "mediatek,mt8188-wpesys";
+			reg = <0 0x14e00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys_vpp0: clock-controller@14e02000 {
+			compatible = "mediatek,mt8188-wpesys-vpp0";
+			reg = <0 0x14e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb7: smi@14e04000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x14e04000 0 0x1000>;
+			clocks = <&wpesys CLK_WPE_TOP_SMI_LARB7>,
+				 <&wpesys CLK_WPE_TOP_SMI_LARB7>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_WPE>;
+			mediatek,larb-id = <SMI_L7_ID>;
+			mediatek,smi = <&vpp_smi_common>;
+		};
+
+		vppsys1: syscon@14f00000 {
+			compatible = "mediatek,mt8188-vppsys1", "syscon";
+			reg = <0 0x14f00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mutex@14f01000 {
+			compatible = "mediatek,mt8188-vpp-mutex";
+			reg = <0 0x14f01000 0 0x1000>;
+			interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_DISP_MUTEX>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x1000 0x1000>;
+		};
+
+		larb5: smi@14f02000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x14f02000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_GALS5>,
+				 <&vppsys1 CLK_VPP1_LARB5>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,larb-id = <SMI_L5_ID>;
+			mediatek,smi = <&vdo_smi_common>;
+		};
+
+		larb6: smi@14f03000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x14f03000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_GALS6>,
+				 <&vppsys1 CLK_VPP1_LARB6>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,larb-id = <SMI_L6_ID>;
+			mediatek,smi = <&vpp_smi_common>;
+		};
+
+		imgsys: clock-controller@15000000 {
+			compatible = "mediatek,mt8188-imgsys";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_dip_top: clock-controller@15110000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-top";
+			reg = <0 0x15110000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		imgsys1_dip_nr: clock-controller@15130000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-nr";
+			reg = <0 0x15130000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		imgsys_wpe1: clock-controller@15220000 {
+			compatible = "mediatek,mt8188-imgsys-wpe1";
+			reg = <0 0x15220000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ipesys: clock-controller@15330000 {
+			compatible = "mediatek,mt8188-ipesys";
+			reg = <0 0x15330000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		imgsys_wpe2: clock-controller@15520000 {
+			compatible = "mediatek,mt8188-imgsys-wpe2";
+			reg = <0 0x15520000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		imgsys_wpe3: clock-controller@15620000 {
+			compatible = "mediatek,mt8188-imgsys-wpe3";
+			reg = <0 0x15620000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		camsys: clock-controller@16000000 {
+			compatible = "mediatek,mt8188-camsys";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawa: clock-controller@1604f000 {
+			compatible = "mediatek,mt8188-camsys-rawa";
+			reg = <0 0x1604f000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		camsys_yuva: clock-controller@1606f000 {
+			compatible = "mediatek,mt8188-camsys-yuva";
+			reg = <0 0x1606f000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1608f000 {
+			compatible = "mediatek,mt8188-camsys-rawb";
+			reg = <0 0x1608f000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		camsys_yuvb: clock-controller@160af000 {
+			compatible = "mediatek,mt8188-camsys-yuvb";
+			reg = <0 0x160af000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ccusys: clock-controller@17200000 {
+			compatible = "mediatek,mt8188-ccusys";
+			reg = <0 0x17200000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		video_decoder: video-decoder@18000000 {
+			compatible = "mediatek,mt8188-vcodec-dec";
+			reg = <0 0x18000000 0 0x1000>, <0 0x18004000 0 0x1000>;
+			ranges = <0 0 0 0x18000000 0 0x26000>;
+			iommus = <&vpp_iommu M4U_PORT_L23_HW_VDEC_UFO_ENC_EXT>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			mediatek,scp = <&scp_c0>;
+
+			video-codec@10000 {
+				compatible = "mediatek,mtk-vcodec-lat";
+				reg = <0 0x10000 0 0x800>;
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys_soc CLK_VDEC1_SOC_VDEC>,
+					 <&vdecsys_soc CLK_VDEC1_SOC_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D6>;
+				clock-names = "sel", "vdec", "lat", "top";
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_VLD_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_VLD2_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_AVC_MV_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_PRED_RD_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_TILE_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_WDMA_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_UFO_ENC_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_UFO_ENC_EXT_C>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_MC_EXT_C>;
+				power-domains = <&spm MT8188_POWER_DOMAIN_VDEC0>;
+			};
+
+			video-codec@25000 {
+				compatible = "mediatek,mtk-vcodec-core";
+				reg = <0 0x25000 0 0x1000>;
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys CLK_VDEC2_VDEC>,
+					 <&vdecsys CLK_VDEC2_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D6>;
+				clock-names = "sel", "vdec", "lat", "top";
+				interrupts = <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&vdo_iommu M4U_PORT_L21_HW_VDEC_MC_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_UFO_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_PP_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_PRED_RD_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_PRED_WR_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_PPWRAP_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_TILE_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_VLD_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_VLD2_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_AVC_MV_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_UFO_EXT_C>;
+				power-domains = <&spm MT8188_POWER_DOMAIN_VDEC1>;
+			};
+		};
+
+		larb23: smi@1800d000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1800d000 0 0x1000>;
+			clocks = <&vdecsys_soc CLK_VDEC1_SOC_LARB1>,
+				 <&vdecsys_soc CLK_VDEC1_SOC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDEC0>;
+			mediatek,larb-id = <SMI_L23_ID>;
+			mediatek,smi = <&vpp_smi_common>;
+		};
+
+		vdecsys_soc: clock-controller@1800f000 {
+			compatible = "mediatek,mt8188-vdecsys-soc";
+			reg = <0 0x1800f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb21: smi@1802e000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1802e000 0 0x1000>;
+			clocks = <&vdecsys CLK_VDEC2_LARB1>,
+				 <&vdecsys CLK_VDEC2_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDEC1>;
+			mediatek,larb-id = <SMI_L21_ID>;
+			mediatek,smi = <&vdo_smi_common>;
+		};
+
+		vdecsys: clock-controller@1802f000 {
+			compatible = "mediatek,mt8188-vdecsys";
+			reg = <0 0x1802f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8188-vencsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb19: smi@1a010000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1a010000 0 0x1000>;
+			clocks = <&vencsys CLK_VENC1_VENC>,
+				 <&vencsys CLK_VENC1_VENC>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VENC>;
+			mediatek,larb-id = <SMI_L19_ID>;
+			mediatek,smi = <&vdo_smi_common>;
+		};
+
+		video_encoder: video-encoder@1a020000 {
+			compatible = "mediatek,mt8188-vcodec-enc";
+			reg = <0 0x1a020000 0 0x10000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			assigned-clocks = <&topckgen CLK_TOP_VENC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+			clocks = <&vencsys CLK_VENC1_VENC>;
+			clock-names = "venc_sel";
+			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L19_VENC_RCPU>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_REC>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_BSDMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_SV_COMV>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_RD_COMV>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_CUR_LUMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_CUR_CHROMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_REF_LUMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_REF_CHROMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_SUB_W_LUMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_SUB_R_LUMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VENC>;
+			mediatek,scp = <&scp_c0>;
+		};
+
+		jpeg_encoder: jpeg-encoder@1a030000 {
+			compatible = "mediatek,mt8188-jpgenc", "mediatek,mtk-jpgenc";
+			reg = <0 0x1a030000 0 0x10000>;
+			clocks = <&vencsys CLK_VENC1_JPGENC>;
+			clock-names = "jpgenc";
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L19_JPGENC_Y_RDMA>,
+				 <&vdo_iommu M4U_PORT_L19_JPGENC_C_RDMA>,
+				 <&vdo_iommu M4U_PORT_L19_JPGENC_Q_TABLE>,
+				 <&vdo_iommu M4U_PORT_L19_JPGENC_BSDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VENC>;
+		};
+
+		jpeg_decoder: jpeg-decoder@1a040000 {
+			compatible = "mediatek,mt8188-jpgdec", "mediatek,mt2701-jpgdec";
+			reg = <0 0x1a040000 0 0x10000>;
+			clocks = <&vencsys CLK_VENC1_LARB>,
+				 <&vencsys CLK_VENC1_JPGDEC>;
+			clock-names = "jpgdec-smi", "jpgdec";
+			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L19_JPGDEC_WDMA_0>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_BSDMA_0>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_WDMA_1>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_BSDMA_1>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_HUFF_OFFSET_1>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_HUFF_OFFSET_0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDEC0>;
+		};
+
+		ovl0: ovl@1c000000 {
+			compatible = "mediatek,mt8188-disp-ovl", "mediatek,mt8195-disp-ovl";
+			reg = <0 0x1c000000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_OVL0>;
+			interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L0_DISP_OVL0_RDMA0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x0000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl0_in: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl0_out: endpoint {
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
+		};
+
+		rdma0: rdma@1c002000 {
+			compatible = "mediatek,mt8188-disp-rdma", "mediatek,mt8195-disp-rdma";
+			reg = <0 0x1c002000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_RDMA0>;
+			interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L1_DISP_RDMA0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x2000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma0_in: endpoint {
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma0_out: endpoint {
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
+		};
+
+		color0: color@1c003000 {
+			compatible = "mediatek,mt8188-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x1c003000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_COLOR0>;
+			interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x3000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					color0_in: endpoint {
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					color0_out: endpoint {
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
+		};
+
+		ccorr0: ccorr@1c004000 {
+			compatible = "mediatek,mt8188-disp-ccorr", "mediatek,mt8192-disp-ccorr";
+			reg = <0 0x1c004000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_CCORR0>;
+			interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x4000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ccorr0_in: endpoint {
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ccorr0_out: endpoint {
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
+		};
+
+		aal0: aal@1c005000 {
+			compatible = "mediatek,mt8188-disp-aal", "mediatek,mt8183-disp-aal";
+			reg = <0 0x1c005000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_AAL0>;
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x5000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					aal0_in: endpoint {
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					aal0_out: endpoint {
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
+		};
+
+		gamma0: gamma@1c006000 {
+			compatible = "mediatek,mt8188-disp-gamma", "mediatek,mt8195-disp-gamma";
+			reg = <0 0x1c006000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_GAMMA0>;
+			interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x6000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					gamma0_in: endpoint {
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					gamma0_out: endpoint { };
+				};
+			};
+		};
+
+		dither0: dither@1c007000 {
+			compatible = "mediatek,mt8188-disp-dither", "mediatek,mt8183-disp-dither";
+			reg = <0 0x1c007000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_DITHER0>;
+			interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dither0_in: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+					dither0_out: endpoint { };
+				};
+			};
+		};
+
+		disp_dsi0: dsi@1c008000 {
+			compatible = "mediatek,mt8188-dsi";
+			reg = <0 0x1c008000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DSI0>,
+				 <&vdosys0 CLK_VDO0_DSI0_DSI>,
+				 <&mipi_tx_config0>;
+			clock-names = "engine", "digital", "hs";
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&mipi_tx_config0>;
+			phy-names = "dphy";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			resets = <&vdosys0 MT8188_VDO0_RST_DSI0>;
+			status = "disabled";
+		};
+
+		dsc0: dsc@1c009000 {
+			compatible = "mediatek,mt8188-disp-dsc", "mediatek,mt8195-disp-dsc";
+			reg = <0 0x1c009000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
+			interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>;
+		};
+
+		disp_dsi1: dsi@1c012000 {
+			compatible = "mediatek,mt8188-dsi";
+			reg = <0 0x1c012000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DSI1>,
+				 <&vdosys0 CLK_VDO0_DSI1_DSI>,
+				 <&mipi_tx_config1>;
+			clock-names = "engine", "digital", "hs";
+			interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&mipi_tx_config1>;
+			phy-names = "dphy";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			resets = <&vdosys0 MT8188_VDO0_RST_DSI1>;
+			status = "disabled";
+		};
+
+		merge0: merge0@1c014000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c014000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_VPP_MERGE0>,
+				 <&vdosys1 CLK_VDO1_MERGE_VDO1_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x4000 0x1000>;
+		};
+
+		dp_intf0: dp-intf@1c015000 {
+			compatible = "mediatek,mt8188-dp-intf";
+			reg = <0 0x1c015000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+				 <&vdosys0 CLK_VDO0_DP_INTF0>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL1>;
+			clock-names = "pixel", "engine", "pll";
+			interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			status = "disabled";
+		};
+
+		mutex0: mutex@1c016000 {
+			compatible = "mediatek,mt8188-disp-mutex";
+			reg = <0 0x1c016000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>;
+			interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>;
+		};
+
+		postmask0: postmask@1c01a000 {
+			compatible = "mediatek,mt8188-disp-postmask",
+				     "mediatek,mt8192-disp-postmask";
+			reg = <0 0x1c01a000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_POSTMASK0>;
+			interrupts = <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xa000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					postmask0_in: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+					postmask0_out: endpoint { };
+				};
+			};
+		};
+
+		vdosys0: syscon@1c01d000 {
+			compatible = "mediatek,mt8188-vdosys0", "syscon";
+			reg = <0 0x1c01d000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xd000 0x1000>;
+		};
+
+		larb0: smi@1c022000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1c022000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_LARB>,
+				 <&vdosys0 CLK_VDO0_SMI_LARB>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,larb-id = <SMI_L0_ID>;
+			mediatek,smi = <&vdo_smi_common>;
+		};
+
+		larb1: smi@1c023000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1c023000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_LARB>,
+				 <&vdosys0 CLK_VDO0_SMI_LARB>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,larb-id = <SMI_L1_ID>;
+			mediatek,smi = <&vpp_smi_common>;
+		};
+
+		vdo_smi_common: smi@1c024000 {
+			compatible = "mediatek,mt8188-smi-common-vdo";
+			reg = <0 0x1c024000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_COMMON>,
+				 <&vdosys0 CLK_VDO0_SMI_GALS>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+		};
+
+		vdo_iommu: iommu@1c028000 {
+			compatible = "mediatek,mt8188-iommu-vdo";
+			reg = <0 0x1c028000 0 0x5000>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_IOMMU>;
+			clock-names = "bclk";
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			#iommu-cells = <1>;
+			mediatek,larbs = <&larb0 &larb2 &larb5 &larb19 &larb21>;
+		};
+
+		vdosys1: syscon@1c100000 {
+			compatible = "mediatek,mt8188-vdosys1", "syscon";
+			reg = <0 0x1c100000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce0 1 CMDQ_THR_PRIO_4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0 0x1000>;
+		};
+
+		mutex1: mutex@1c101000 {
+			compatible = "mediatek,mt8188-disp-mutex";
+			reg = <0 0x1c101000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
+			interrupts = <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
+		};
+
+		larb2: smi@1c102000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1c102000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_SMI_LARB2>,
+				 <&vdosys1 CLK_VDO1_SMI_LARB2>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,larb-id = <SMI_L2_ID>;
+			mediatek,smi = <&vdo_smi_common>;
+		};
+
+		larb3: smi@1c103000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1c103000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_SMI_LARB3>,
+				 <&vdosys1 CLK_VDO1_SMI_LARB3>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,larb-id = <SMI_L3_ID>;
+			mediatek,smi = <&vpp_smi_common>;
+		};
+
+		vdo1_rdma0: rdma@1c104000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c104000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+			interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L2_MDP_RDMA0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+		};
+
+		vdo1_rdma1: rdma@1c105000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c105000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA1>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_MDP_RDMA1>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+		};
+
+		vdo1_rdma2: rdma@1c106000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c106000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA2>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L2_MDP_RDMA2>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+		};
+
+		vdo1_rdma3: rdma@1c107000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c107000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA3>;
+			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_MDP_RDMA3>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+		};
+
+		vdo1_rdma4: rdma@1c108000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c108000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA4>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L2_MDP_RDMA4>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+		};
+
+		vdo1_rdma5: rdma@1c109000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c109000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA5>;
+			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_MDP_RDMA5>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+		};
+
+		vdo1_rdma6: rdma@1c10a000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10a000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA6>;
+			interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L2_MDP_RDMA6>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+		};
+
+		vdo1_rdma7: rdma@1c10b000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10b000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA7>;
+			interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_MDP_RDMA7>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+		};
+
+		merge1: merge@1c10c000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10c000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE0>,
+				 <&vdosys1 CLK_VDO1_MERGE0_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE0_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xc000 0x1000>;
+			mediatek,merge-mute;
+		};
+
+		merge2: merge@1c10d000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10d000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE1>,
+				 <&vdosys1 CLK_VDO1_MERGE1_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE1_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xd000 0x1000>;
+			mediatek,merge-mute;
+		};
+
+		merge3: merge@1c10e000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10e000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE2>,
+				 <&vdosys1 CLK_VDO1_MERGE2_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE2_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xe000 0x1000>;
+			mediatek,merge-mute;
+		};
+
+		merge4: merge@1c10f000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10f000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE3>,
+				 <&vdosys1 CLK_VDO1_MERGE3_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE3_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xf000 0x1000>;
+			mediatek,merge-mute;
+		};
+
+		merge5: merge@1c110000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c110000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>,
+				 <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE4_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x0000 0x1000>;
+			mediatek,merge-fifo-en;
+		};
+
+		dp_intf1: dp-intf@1c113000 {
+			compatible = "mediatek,mt8188-dp-intf";
+			reg = <0 0x1c113000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_DPINTF>,
+				 <&vdosys1 CLK_VDO1_DP_INTF0_MMCK>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL2>;
+			clock-names = "pixel", "engine", "pll";
+			interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			status = "disabled";
+		};
+
+		ethdr0: ethdr@1c114000 {
+			compatible = "mediatek,mt8188-disp-ethdr", "mediatek,mt8195-disp-ethdr";
+			reg = <0 0x1c114000 0 0x1000>,
+			      <0 0x1c115000 0 0x1000>,
+			      <0 0x1c117000 0 0x1000>,
+			      <0 0x1c119000 0 0x1000>,
+			      <0 0x1c11a000 0 0x1000>,
+			      <0 0x1c11b000 0 0x1000>,
+			      <0 0x1c11c000 0 0x1000>;
+			reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				    "vdo_be", "adl_ds";
+
+			clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
+				 <&vdosys1 CLK_VDO1_26M_SLOW>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
+				 <&topckgen CLK_TOP_ETHDR>;
+			clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				      "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
+				      "gfx_fe0_async", "gfx_fe1_async", "vdo_be_async", "ethdr_top";
+
+			interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_HDR_DS_SMI>,
+				 <&vpp_iommu M4U_PORT_L3_HDR_ADL_SMI>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8188_VDO1_RST_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8188_VDO1_RST_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8188_VDO1_RST_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8188_VDO1_RST_HDR_VDO_BE_DL_ASYNC>;
+
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>;
+		};
+
+		padding0: padding@1c11d000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c11d000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>;
+		};
+
+		padding1: padding@1c11e000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c11e000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING1>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xe000 0x1000>;
+		};
+
+		padding2: padding@1c11f000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c11f000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING2>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xf000 0x1000>;
+		};
+
+		padding3: padding@1c120000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c120000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING3>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x0000 0x1000>;
+		};
+
+		padding4: padding@1c121000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c121000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING4>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x1000 0x1000>;
+		};
+
+		padding5: padding@1c122000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c122000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING5>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x2000 0x1000>;
+		};
+
+		padding6: padding@1c123000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c123000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING6>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x3000 0x1000>;
+		};
+
+		padding7: padding@1c124000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c124000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING7>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x4000 0x1000>;
+		};
+
+		edp_tx: edp-tx@1c500000 {
+			compatible = "mediatek,mt8188-edp-tx";
+			reg = <0 0x1c500000 0 0x8000>;
+			interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
+			nvmem-cells = <&dp_calib_data>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8188_POWER_DOMAIN_EDP_TX>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+
+		dp_tx: dp-tx@1c600000 {
+			compatible = "mediatek,mt8188-dp-tx";
+			reg = <0 0x1c600000 0 0x8000>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+			nvmem-cells = <&dp_calib_data>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8188_POWER_DOMAIN_DP_TX>;
+			max-linkrate-mhz = <5400>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
index fd2cb8765a15..ac2673e56fb8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
@@ -7,6 +7,7 @@
 
 / {
 	model = "Google Hayato rev1";
+	chassis-type = "convertible";
 	compatible = "google,hayato-rev1", "google,hayato", "mediatek,mt8192";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
index bc88866ab2f5..163960f58db5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
@@ -8,6 +8,7 @@
 
 / {
 	model = "Google Spherion (rev0 - 3)";
+	chassis-type = "laptop";
 	compatible = "google,spherion-rev3", "google,spherion-rev2",
 		     "google,spherion-rev1", "google,spherion-rev0",
 		     "google,spherion", "mediatek,mt8192";
@@ -78,3 +79,21 @@
 &touchscreen {
 	compatible = "elan,ekth3500";
 };
+
+&i2c2 {
+	/* synaptics touchpad */
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+		status = "fail-needs-probe";
+	};
+};
+
+&trackpad {
+	status = "fail-needs-probe";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index f2281250ac35..0b4664f044a1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -147,6 +147,7 @@
 		regulator-boot-on;
 		gpio = <&pio 127 GPIO_ACTIVE_HIGH>;
 		vin-supply = <&pp3300_g>;
+		off-on-delay-us = <500000>;
 	};
 
 	/* separately switched 3.3V power rail */
@@ -198,6 +199,13 @@
 		#size-cells = <2>;
 		ranges;
 
+		afe_dma_mem: audio-dma-pool {
+			compatible = "shared-dma-pool";
+			size = <0 0x100000>;
+			alignment = <0 0x10>;
+			no-map;
+		};
+
 		scp_mem_reserved: scp@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
@@ -275,6 +283,10 @@
 	};
 };
 
+&afe {
+	memory-region = <&afe_dma_mem>;
+};
+
 &dsi0 {
 	status = "okay";
 };
@@ -336,12 +348,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;
 
-	trackpad@15 {
+	trackpad: trackpad@15 {
 		compatible = "elan,ekth3000";
 		reg = <0x15>;
-		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&trackpad_pins>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
 		vcc-supply = <&pp3300_u>;
 		wakeup-source;
 	};
@@ -1332,14 +1344,11 @@
 		spi-max-frequency = <3000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cros_ec_int>;
+		wakeup-source;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		base_detection: cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
 			#pwm-cells = <1>;
@@ -1402,7 +1411,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi5_pins>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;
@@ -1422,9 +1431,8 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
@@ -1432,9 +1440,8 @@
 			};
 
 			mt6315_6_vbuck3: vbuck3 {
-				regulator-compatible = "vbuck3";
 				regulator-name = "Vlcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
@@ -1449,9 +1456,8 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
-				regulator-min-microvolt = <606250>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <800000>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 69f4cded5dbb..47dea10dd3b8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -14,6 +14,8 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/mt8192-power.h>
 #include <dt-bindings/reset/mt8192-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
 
 / {
 	compatible = "mediatek,mt8192";
@@ -72,6 +74,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@100 {
@@ -90,6 +93,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@200 {
@@ -108,6 +112,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@300 {
@@ -126,6 +131,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu4: cpu@400 {
@@ -144,6 +150,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@500 {
@@ -162,6 +169,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@600 {
@@ -180,6 +188,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@700 {
@@ -198,6 +207,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu-map {
@@ -788,6 +798,29 @@
 			status = "disabled";
 		};
 
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8192-lvts-ap";
+			reg = <0 0x1100b000 0 0xc00>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8192-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>, <&lvts_e_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg MT8192_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+			reset-names = "svs_rst";
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1114,12 +1147,31 @@
 			status = "disabled";
 		};
 
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8192-lvts-mcu";
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
 		efuse: efuse@11c10000 {
 			compatible = "mediatek,mt8192-efuse", "mediatek,efuse";
 			reg = <0 0x11c10000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			socinfo-data1@44 {
+				reg = <0x044 0x4>;
+			};
+
+			socinfo-data2@50 {
+				reg = <0x050 0x4>;
+			};
+
 			lvts_e_data1: data1@1c0 {
 				reg = <0x1c0 0x58>;
 			};
@@ -1412,6 +1464,7 @@
 			reg = <0 0x14001000 0 0x1000>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
 					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
@@ -1770,7 +1823,7 @@
 			mediatek,scp = <&scp>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
 			clocks = <&vencsys CLK_VENC_SET1_VENC>;
-			clock-names = "venc-set1";
+			clock-names = "venc_sel";
 			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
 			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
 		};
@@ -1899,4 +1952,426 @@
 			power-domains = <&spm MT8192_POWER_DOMAIN_MDP>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu3_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>;
+
+			trips {
+				cpu4_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>;
+
+			trips {
+				cpu5_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>;
+
+			trips {
+				cpu6_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>;
+
+			trips {
+				cpu7_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		vpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU0>;
+
+			trips {
+				vpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU1>;
+
+			trips {
+				vpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU0>;
+
+			trips {
+				gpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU1>;
+
+			trips {
+				gpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		infra-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_INFRA>;
+
+			trips {
+				infra_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				infra_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_CAM>;
+
+			trips {
+				cam_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD0>;
+
+			trips {
+				md0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD1>;
+
+			trips {
+				md1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD2>;
+
+			trips {
+				md2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts
new file mode 100644
index 000000000000..49664de99b88
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8195-cherry.dtsi"
+
+/ {
+	model = "HP Dojo (sku 1, 3, 5, 7) board";
+	chassis-type = "convertible";
+	compatible = "google,dojo-sku7", "google,dojo-sku5",
+		     "google,dojo-sku3", "google,dojo-sku1",
+		     "google,dojo", "mediatek,mt8195";
+};
+
+&audio_codec {
+	compatible = "realtek,rt5682s";
+	realtek,amic-delay-ms = <250>;
+};
+
+&i2c2 {
+	spk_r_amp: amplifier@38 {
+		compatible = "maxim,max98390";
+		reg = <0x38>;
+		reset-gpios = <&pio 100 GPIO_ACTIVE_LOW>;
+		sound-name-prefix = "Right";
+		#sound-dai-cells = <0>;
+	};
+
+	spk_l_amp: amplifier@39 {
+		compatible = "maxim,max98390";
+		reg = <0x39>;
+		sound-name-prefix = "Left";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c4 {
+	touchscreen@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		hid-descr-addr = <0x0001>;
+		interrupts-extended = <&pio 92 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		post-power-on-delay-ms = <10>;
+		vdd-supply = <&pp3300_s3>;
+	};
+};
+
+&keyboard_controller {
+	linux,keymap = <
+		CROS_STD_MAIN_KEYMAP
+
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_KBDILLUMTOGGLE)
+		MATRIX_KEY(0x01, 0x09, KEY_PLAYPAUSE)
+		MATRIX_KEY(0x00, 0x04, KEY_MICMUTE)
+		MATRIX_KEY(0x00, 0x01, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x05, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x03, 0x05, KEY_VOLUMEUP)
+	>;
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins_default>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio_default {
+	pins-low-power-hdmi-disable {
+		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
+			 <PINMUX_GPIO32__FUNC_GPIO32>,
+			 <PINMUX_GPIO33__FUNC_GPIO33>;
+		input-enable;
+		bias-pull-down;
+	};
+
+	pins-low-power-hdmi-rsel-disable {
+		pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down = <75000>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359_max98390_rt5682";
+	model = "m8195_m98390_5682s";
+
+	audio-routing =
+		"Headphone", "HPOL",
+		"Headphone", "HPOR",
+		"IN1P", "Headset Mic",
+		"Right Spk", "Right BE_OUT",
+		"Left Spk", "Left BE_OUT";
+
+	spk-playback-dai-link {
+		codec {
+			sound-dai = <&spk_r_amp>, <&spk_l_amp>;
+		};
+	};
+};
+
+&spk_amplifier {
+	/* Disable RT1019P, not present on Dojo */
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
index 2d5e8f371b6d..a50b4e8efaba 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
@@ -13,6 +13,7 @@
 &audio_codec {
 	compatible = "realtek,rt5682i";
 	realtek,btndet-delay = <16>;
+	VBAT-supply = <&pp3300_z5>;
 };
 
 &sound {
@@ -23,3 +24,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
index 2586c32ce6e6..a8657c0068d5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -13,19 +13,25 @@
 &audio_codec {
 	compatible = "realtek,rt5682i";
 	realtek,btndet-delay = <16>;
+	VBAT-supply = <&pp3300_z5>;
 };
 
 &pio_default {
 	pins-low-power-hdmi-disable {
 		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
 			 <PINMUX_GPIO32__FUNC_GPIO32>,
-			 <PINMUX_GPIO33__FUNC_GPIO33>,
-			 <PINMUX_GPIO34__FUNC_GPIO34>,
-			 <PINMUX_GPIO35__FUNC_GPIO35>;
+			 <PINMUX_GPIO33__FUNC_GPIO33>;
 		input-enable;
 		bias-pull-down;
 	};
 
+	pins-low-power-hdmi-rsel-disable {
+		pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down = <75000>;
+	};
+
 	pins-low-power-pcie0-disable {
 		pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
 			 <PINMUX_GPIO20__FUNC_GPIO20>,
@@ -43,3 +49,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
index f54f9477b99d..9049d362a5e0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
@@ -20,13 +20,18 @@
 	pins-low-power-hdmi-disable {
 		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
 			 <PINMUX_GPIO32__FUNC_GPIO32>,
-			 <PINMUX_GPIO33__FUNC_GPIO33>,
-			 <PINMUX_GPIO34__FUNC_GPIO34>,
-			 <PINMUX_GPIO35__FUNC_GPIO35>;
+			 <PINMUX_GPIO33__FUNC_GPIO33>;
 		input-enable;
 		bias-pull-down;
 	};
 
+	pins-low-power-hdmi-rsel-disable {
+		pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down = <75000>;
+	};
+
 	pins-low-power-pcie0-disable {
 		pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
 			 <PINMUX_GPIO20__FUNC_GPIO20>,
@@ -44,3 +49,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index 5a7cab489ff3..b3761b80cac7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -127,6 +127,77 @@
 		regulator-boot-on;
 	};
 
+	/* Murata NCP03WF104F05RL */
+	tboard_thermistor1: thermal-sensor-t1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
+	tboard_thermistor2: thermal-sensor-t2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
 	usb_vbus: regulator-5v0-usb-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb-vbus";
@@ -169,6 +240,7 @@
 	spk_amplifier: rt1019p {
 		compatible = "realtek,rt1019p";
 		label = "rt1019p";
+		#sound-dai-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&rt1019p_pins_default>;
 		sdb-gpios = <&pio 100 GPIO_ACTIVE_HIGH>;
@@ -189,12 +261,65 @@
 	memory-region = <&afe_mem>;
 };
 
+&auxadc {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu2 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu3 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu5 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu6 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu7 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsc0_in>;
+};
+
 &dp_intf0 {
 	status = "okay";
 
-	port {
-		dp_intf0_out: endpoint {
-			remote-endpoint = <&edp_in>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dp_intf0_in: endpoint {
+				remote-endpoint = <&merge0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dp_intf0_out: endpoint {
+				remote-endpoint = <&edp_in>;
+			};
 		};
 	};
 };
@@ -202,9 +327,51 @@
 &dp_intf1 {
 	status = "okay";
 
-	port {
-		dp_intf1_out: endpoint {
-			remote-endpoint = <&dptx_in>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			dp_intf1_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			dp_intf1_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dptx_in>;
+			};
+		};
+	};
+};
+
+&dsc0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsc0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsc0_out: endpoint {
+				remote-endpoint = <&merge0_in>;
+			};
 		};
 	};
 };
@@ -249,6 +416,35 @@
 	};
 };
 
+&ethdr0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ethdr0_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&vdosys1_ep_ext>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ethdr0_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_in>;
+			};
+		};
+	};
+};
+
 &disp_pwm0 {
 	status = "okay";
 
@@ -259,6 +455,7 @@
 &dp_tx {
 	status = "okay";
 
+	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&dptx_pin>;
 
@@ -267,8 +464,12 @@
 		#size-cells = <0>;
 
 		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			reg = <0>;
-			dptx_in: endpoint {
+
+			dptx_in: endpoint@1 {
+				reg = <1>;
 				remote-endpoint = <&dp_intf1_out>;
 			};
 		};
@@ -329,11 +530,13 @@
 		/* Realtek RT5682i or RT5682s, sharing the same configuration */
 		reg = <0x1a>;
 		interrupts-extended = <&pio 89 IRQ_TYPE_EDGE_BOTH>;
+		#sound-dai-cells = <1>;
 		realtek,jd-src = <1>;
 
 		AVDD-supply = <&mt6359_vio18_ldo_reg>;
+		DBVDD-supply = <&mt6359_vio18_ldo_reg>;
 		MICVDD-supply = <&pp3300_z2>;
-		VBAT-supply = <&pp3300_z5>;
+		LDO1-IN-supply = <&mt6359_vio18_ldo_reg>;
 	};
 };
 
@@ -401,6 +604,64 @@
 	};
 };
 
+&merge0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			merge0_in: endpoint {
+				remote-endpoint = <&dsc0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			merge0_out: endpoint {
+				remote-endpoint = <&dp_intf0_in>;
+			};
+		};
+	};
+};
+
+&merge5 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			merge5_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&ethdr0_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			merge5_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dp_intf1_in>;
+			};
+		};
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
 &mmc0 {
 	status = "okay";
 
@@ -471,7 +732,6 @@
 
 /* for GPU SRAM */
 &mt6359_vsram_others_ldo_reg {
-	regulator-always-on;
 	regulator-min-microvolt = <750000>;
 	regulator-max-microvolt = <750000>;
 };
@@ -495,6 +755,10 @@
 	};
 };
 
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
 &pcie1 {
 	status = "okay";
 
@@ -1048,6 +1312,48 @@
 		"AFE_SOF_DL2", "AFE_SOF_DL3", "AFE_SOF_UL4", "AFE_SOF_UL5";
 	pinctrl-names = "default";
 	pinctrl-0 = <&aud_pins_default>;
+
+	audio-routing =
+		"Headphone", "HPOL",
+		"Headphone", "HPOR",
+		"IN1P", "Headset Mic",
+		"Ext Spk", "Speaker";
+
+	mm-dai-link {
+		link-name = "ETDM1_IN_BE";
+		mediatek,clk-provider = "cpu";
+	};
+
+	hs-playback-dai-link {
+		link-name = "ETDM1_OUT_BE";
+		mediatek,clk-provider = "cpu";
+		codec {
+			sound-dai = <&audio_codec 0>;
+		};
+	};
+
+	hs-capture-dai-link {
+		link-name = "ETDM2_IN_BE";
+		mediatek,clk-provider = "cpu";
+		codec {
+			sound-dai = <&audio_codec 0>;
+		};
+	};
+
+	spk-playback-dai-link {
+		link-name = "ETDM2_OUT_BE";
+		mediatek,clk-provider = "cpu";
+		codec {
+			sound-dai = <&spk_amplifier>;
+		};
+	};
+
+	displayport-dai-link {
+		link-name = "DPTX_BE";
+		codec {
+			sound-dai = <&dp_tx>;
+		};
+	};
 };
 
 &spi0 {
@@ -1067,10 +1373,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&cros_ec_int>;
 		spi-max-frequency = <3000000>;
-
-		keyboard-backlight {
-			compatible = "google,cros-kbd-led-backlight";
-		};
+		wakeup-source;
 
 		i2c_tunnel: i2c-tunnel {
 			compatible = "google,cros-ec-i2c-tunnel";
@@ -1129,9 +1432,8 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-ramp-delay = <6250>;
@@ -1147,14 +1449,42 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
-				regulator-min-microvolt = <625000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-ramp-delay = <6250>;
 				regulator-allowed-modes = <0 1 2>;
-				regulator-always-on;
+			};
+		};
+	};
+};
+
+&thermal_zones {
+	soc-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&tboard_thermistor1>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pmic-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <0>;
+		thermal-sensors = <&tboard_thermistor2>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
 			};
 		};
 	};
@@ -1180,24 +1510,71 @@
 	status = "okay";
 };
 
-&xhci0 {
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
+/*
+ * For the USB Type-C ports the role and alternate modes switching is
+ * done by the EC so we set dr_mode to host to avoid interfering.
+ */
+&ssusb0 {
+	dr_mode = "host";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb2 {
+	dr_mode = "host";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
+};
 
+&ssusb3 {
+	dr_mode = "host";
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&vdosys1 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys1_ep_ext: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ethdr0_in>;
+		};
+	};
+};
+
+&xhci0 {
+	status = "okay";
+
+	rx-fifo-depth = <3072>;
 	vbus-supply = <&usb_vbus>;
 };
 
 &xhci1 {
 	status = "okay";
 
+	phys = <&u2port1 PHY_TYPE_USB2>;
+	rx-fifo-depth = <3072>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
+	mediatek,u3p-dis-msk = <1>;
 };
 
 &xhci2 {
 	status = "okay";
-
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
 
@@ -1206,7 +1583,6 @@
 
 	/* MT7921's USB Bluetooth has issues with USB2 LPM */
 	usb2-lpm-disable;
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
 
@@ -1225,6 +1601,11 @@
 		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
 		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
 		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+
+		/* T11 to T13 are present only on Dojo */
+		MATRIX_KEY(0x00, 0x01, 0)	/* T11 */
+		MATRIX_KEY(0x01, 0x05, 0)	/* T12 */
+		MATRIX_KEY(0x03, 0x05, 0)	/* T13 */
 	>;
 
 	linux,keymap = <
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 69c7f3954ae5..1f59b5786b81 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -109,6 +109,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&eth_default_pins>;
 	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,mac-wol;
 	status = "okay";
 
 	mdio {
@@ -128,6 +129,7 @@
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
+		#interrupt-cells = <1>;
 		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "IRQB";
 
@@ -136,7 +138,6 @@
 			richtek,vinovp-microvolt = <14500000>;
 
 			otg_vbus_regulator: usb-otg-vbus-regulator {
-				regulator-compatible = "usb-otg-vbus";
 				regulator-name = "usb-otg-vbus";
 				regulator-min-microvolt = <4425000>;
 				regulator-max-microvolt = <5825000>;
@@ -148,7 +149,6 @@
 			LDO_VIN3-supply = <&mt6360_buck2>;
 
 			mt6360_buck1: buck1 {
-				regulator-compatible = "BUCK1";
 				regulator-name = "mt6360,buck1";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@@ -159,7 +159,6 @@
 			};
 
 			mt6360_buck2: buck2 {
-				regulator-compatible = "BUCK2";
 				regulator-name = "mt6360,buck2";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@@ -170,7 +169,6 @@
 			};
 
 			mt6360_ldo1: ldo1 {
-				regulator-compatible = "LDO1";
 				regulator-name = "mt6360,ldo1";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -179,7 +177,6 @@
 			};
 
 			mt6360_ldo2: ldo2 {
-				regulator-compatible = "LDO2";
 				regulator-name = "mt6360,ldo2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -188,7 +185,6 @@
 			};
 
 			mt6360_ldo3: ldo3 {
-				regulator-compatible = "LDO3";
 				regulator-name = "mt6360,ldo3";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -197,7 +193,6 @@
 			};
 
 			mt6360_ldo5: ldo5 {
-				regulator-compatible = "LDO5";
 				regulator-name = "mt6360,ldo5";
 				regulator-min-microvolt = <2700000>;
 				regulator-max-microvolt = <3600000>;
@@ -206,7 +201,6 @@
 			};
 
 			mt6360_ldo6: ldo6 {
-				regulator-compatible = "LDO6";
 				regulator-name = "mt6360,ldo6";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
@@ -215,7 +209,6 @@
 			};
 
 			mt6360_ldo7: ldo7 {
-				regulator-compatible = "LDO7";
 				regulator-name = "mt6360,ldo7";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
@@ -304,14 +297,14 @@
 				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
 				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
 				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 		};
 		pins-cc {
 			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
 				 <PINMUX_GPIO88__FUNC_GBE_TXEN>,
 				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
 				 <PINMUX_GPIO86__FUNC_GBE_RXC>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 		};
 		pins-rxd {
 			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
@@ -376,7 +369,7 @@
 	mmc0_default_pins: mmc0-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -391,13 +384,13 @@
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -405,7 +398,7 @@
 	mmc0_uhs_pins: mmc0-uhs-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -420,19 +413,19 @@
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-ds {
 			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -440,7 +433,7 @@
 	mmc1_default_pins: mmc1-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -451,7 +444,7 @@
 				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
@@ -464,7 +457,7 @@
 	mmc1_uhs_pins: mmc1-uhs-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -475,7 +468,7 @@
 				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -528,8 +521,22 @@
 	status = "okay";
 };
 
-&xhci0 {
+&ssusb0 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb2 {
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci0 {
 	vbus-supply = <&otg_vbus_regulator>;
 	status = "okay";
 };
@@ -540,11 +547,9 @@
 };
 
 &xhci2 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };
 
 &xhci3 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
index 690dc7717f2c..83456d649ff7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
@@ -74,7 +74,6 @@
 			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
 				 <PINMUX_GPIO9__FUNC_SCL0>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-			mediatek,drive-strength-adv = <0>;
 			drive-strength = <6>;
 		};
 	};
@@ -84,7 +83,6 @@
 			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
 				 <PINMUX_GPIO11__FUNC_SCL1>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-			mediatek,drive-strength-adv = <0>;
 			drive-strength = <6>;
 		};
 	};
@@ -94,7 +92,7 @@
 			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
 				 <PINMUX_GPIO17__FUNC_SCL4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-			mediatek,drive-strength-adv = <7>;
+			drive-strength-microamp = <1000>;
 		};
 	};
 
@@ -160,6 +158,18 @@
 	status = "okay";
 };
 
+&ssusb0 {
+	status = "okay";
+};
+
+&ssusb2 {
+	status = "okay";
+};
+
+&ssusb3 {
+	status = "okay";
+};
+
 &xhci0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index e0ac2e9f5b72..ec452d657031 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -487,7 +487,7 @@
 		};
 
 		infracfg_ao: syscon@10001000 {
-			compatible = "mediatek,mt8195-infracfg_ao", "syscon", "simple-mfd";
+			compatible = "mediatek,mt8195-infracfg_ao", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -538,7 +538,7 @@
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8195_POWER_DOMAIN_MFG1 {
+					mfg1: power-domain@MT8195_POWER_DOMAIN_MFG1 {
 						reg = <MT8195_POWER_DOMAIN_MFG1>;
 						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
 							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
@@ -617,22 +617,6 @@
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8195_POWER_DOMAIN_VDEC1 {
-						reg = <MT8195_POWER_DOMAIN_VDEC1>;
-						clocks = <&vdecsys CLK_VDEC_LARB1>;
-						clock-names = "vdec1-0";
-						mediatek,infracfg = <&infracfg_ao>;
-						#power-domain-cells = <0>;
-					};
-
-					power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
-						reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
-						clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
-						clock-names = "venc1-larb";
-						mediatek,infracfg = <&infracfg_ao>;
-						#power-domain-cells = <0>;
-					};
-
 					power-domain@MT8195_POWER_DOMAIN_VDOSYS0 {
 						reg = <MT8195_POWER_DOMAIN_VDOSYS0>;
 						clocks = <&topckgen CLK_TOP_CFG_VDO0>,
@@ -678,15 +662,25 @@
 							clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
 							clock-names = "vdec0-0";
 							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
 							#power-domain-cells = <0>;
-						};
 
-						power-domain@MT8195_POWER_DOMAIN_VDEC2 {
-							reg = <MT8195_POWER_DOMAIN_VDEC2>;
-							clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
-							clock-names = "vdec2-0";
-							mediatek,infracfg = <&infracfg_ao>;
-							#power-domain-cells = <0>;
+							power-domain@MT8195_POWER_DOMAIN_VDEC1 {
+								reg = <MT8195_POWER_DOMAIN_VDEC1>;
+								clocks = <&vdecsys CLK_VDEC_LARB1>;
+								clock-names = "vdec1-0";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_VDEC2 {
+								reg = <MT8195_POWER_DOMAIN_VDEC2>;
+								clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
+								clock-names = "vdec2-0";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
 						};
 
 						power-domain@MT8195_POWER_DOMAIN_VENC {
@@ -694,7 +688,17 @@
 							clocks = <&vencsys CLK_VENC_LARB>;
 							clock-names = "venc0-larb";
 							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
 							#power-domain-cells = <0>;
+
+							power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
+								reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
+								clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
+								clock-names = "venc1-larb";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
 						};
 
 						power-domain@MT8195_POWER_DOMAIN_VDOSYS1 {
@@ -1119,7 +1123,7 @@
 
 		lvts_ap: thermal-sensor@1100b000 {
 			compatible = "mediatek,mt8195-lvts-ap";
-			reg = <0 0x1100b000 0 0x1000>;
+			reg = <0 0x1100b000 0 0xc00>;
 			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
 			resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
@@ -1128,6 +1132,18 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8195-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calib_data &lvts_efuse_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg_ao MT8195_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+			reset-names = "svs_rst";
+		};
+
 		disp_pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1335,29 +1351,40 @@
 			};
 		};
 
-		xhci0: usb@11200000 {
-			compatible = "mediatek,mt8195-xhci",
-				     "mediatek,mtk-xhci";
-			reg = <0 0x11200000 0 0x1000>,
-			      <0 0x11203e00 0 0x0100>;
+		ssusb0: usb@11201000 {
+			compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2dff>, <0 0x11203e00 0 0x0100>;
 			reg-names = "mac", "ippc";
-			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port0 PHY_TYPE_USB2>,
-			       <&u3port0 PHY_TYPE_USB3>;
-			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
-					  <&topckgen CLK_TOP_SSUSB_XHCI>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
-						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			ranges = <0 0 0 0x11200000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
 				 <&topckgen CLK_TOP_SSUSB_REF>,
-				 <&apmixedsys CLK_APMIXED_USB1PLL>,
-				 <&clk26m>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
-				      "xhci_ck";
-			mediatek,syscon-wakeup = <&pericfg 0x400 103>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
 			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x400 103>;
 			status = "disabled";
+
+			xhci0: usb@0 {
+				compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+						  <&topckgen CLK_TOP_SSUSB_XHCI>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+							 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
+					 <&topckgen CLK_TOP_SSUSB_REF>,
+					 <&apmixedsys CLK_APMIXED_USB1PLL>,
+					 <&clk26m>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+				status = "disabled";
+			};
 		};
 
 		mmc0: mmc@11230000 {
@@ -1403,6 +1430,31 @@
 			status = "disabled";
 		};
 
+		ufshci: ufshci@11270000 {
+			compatible = "mediatek,mt8195-ufshci";
+			reg = <0 0x11270000 0 0x2300>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&ufsphy>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AES_UFSFDE>,
+				 <&infracfg_ao CLK_INFRA_AO_AES>,
+				 <&infracfg_ao CLK_INFRA_AO_UFS_TICK>,
+				 <&infracfg_ao CLK_INFRA_AO_UNIPRO_SYS>,
+				 <&infracfg_ao CLK_INFRA_AO_UNIPRO_TICK>,
+				 <&infracfg_ao CLK_INFRA_AO_UFS_MP_SAP_B>,
+				 <&infracfg_ao CLK_INFRA_AO_UFS_TX_SYMBOL>,
+				 <&infracfg_ao CLK_INFRA_AO_PERI_UFS_MEM_SUB>;
+			clock-names = "ufs", "ufs_aes", "ufs_tick",
+					"unipro_sysclk", "unipro_tick",
+					"unipro_mp_bclk", "ufs_tx_symbol",
+					"ufs_mem_sub";
+			freq-table-hz = <0 0>, <0 0>, <0 0>,
+					<0 0>, <0 0>, <0 0>,
+					<0 0>, <0 0>;
+
+			mediatek,ufs-disable-mcq;
+			status = "disabled";
+		};
+
 		lvts_mcu: thermal-sensor@11278000 {
 			compatible = "mediatek,mt8195-lvts-mcu";
 			reg = <0 0x11278000 0 0x1000>;
@@ -1421,7 +1473,7 @@
 			      <0 0x11293e00 0 0x0100>;
 			reg-names = "mac", "ippc";
 			interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port1 PHY_TYPE_USB2>;
+			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
 			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_1P>,
 					  <&topckgen CLK_TOP_SSUSB_XHCI_1P>;
 			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
@@ -1438,52 +1490,68 @@
 			status = "disabled";
 		};
 
-		xhci2: usb@112a0000 {
-			compatible = "mediatek,mt8195-xhci",
-				     "mediatek,mtk-xhci";
-			reg = <0 0x112a0000 0 0x1000>,
-			      <0 0x112a3e00 0 0x0100>;
+		ssusb2: usb@112a1000 {
+			compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3";
+			reg = <0 0x112a1000 0 0x2dff>, <0 0x112a3e00 0 0x0100>;
 			reg-names = "mac", "ippc";
-			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port2 PHY_TYPE_USB2>;
-			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>,
-					  <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
-						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			ranges = <0 0 0 0x112a0000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
 			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
 				 <&topckgen CLK_TOP_SSUSB_P2_REF>,
-				 <&clk26m>,
-				 <&clk26m>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
-				      "xhci_ck";
-			mediatek,syscon-wakeup = <&pericfg 0x400 105>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port2 PHY_TYPE_USB2>;
 			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x400 105>;
 			status = "disabled";
+
+			xhci2: usb@0 {
+				compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
 		};
 
-		xhci3: usb@112b0000 {
-			compatible = "mediatek,mt8195-xhci",
-				     "mediatek,mtk-xhci";
-			reg = <0 0x112b0000 0 0x1000>,
-			      <0 0x112b3e00 0 0x0100>;
+		ssusb3: usb@112b1000 {
+			compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3";
+			reg = <0 0x112b1000 0 0x2dff>, <0 0x112b3e00 0 0x0100>;
 			reg-names = "mac", "ippc";
-			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port3 PHY_TYPE_USB2>;
-			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>,
-					  <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
-						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			ranges = <0 0 0 0x112b0000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
 			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
 				 <&topckgen CLK_TOP_SSUSB_P3_REF>,
-				 <&clk26m>,
-				 <&clk26m>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
-				      "xhci_ck";
-			mediatek,syscon-wakeup = <&pericfg 0x400 106>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port3 PHY_TYPE_USB2>;
 			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x400 106>;
 			status = "disabled";
+
+			xhci3: usb@0 {
+				compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
 		};
 
 		pcie0: pcie@112f0000 {
@@ -1520,9 +1588,6 @@
 
 			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
 
-			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>;
-			reset-names = "mac";
-
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
@@ -1572,9 +1637,6 @@
 			phy-names = "pcie-phy";
 			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
 
-			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>;
-			reset-names = "mac";
-
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
@@ -1686,6 +1748,12 @@
 			lvts_efuse_data2: lvts2-calib@1d0 {
 				reg = <0x1d0 0x38>;
 			};
+			svs_calib_data: svs-calib@580 {
+				reg = <0x580 0x64>;
+			};
+			socinfo-data1@7a0 {
+				reg = <0x7a0 0x4>;
+			};
 		};
 
 		u3phy2: t-phy@11c40000 {
@@ -1718,6 +1786,26 @@
 			};
 		};
 
+		mipi_tx0: dsi-phy@11c80000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c80000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx1: dsi-phy@11c90000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c90000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx1_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c5: i2c@11d00000 {
 			compatible = "mediatek,mt8195-i2c",
 				     "mediatek,mt8192-i2c";
@@ -1963,6 +2051,117 @@
 			compatible = "mediatek,mt8195-vppsys0", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		dma-controller@14001000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14001000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>;
+			mediatek,scp = <&scp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_RDMA>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>;
+			mboxes = <&gce1 12 CMDQ_THR_PRIO_1>,
+				 <&gce1 13 CMDQ_THR_PRIO_1>,
+				 <&gce1 14 CMDQ_THR_PRIO_1>,
+				 <&gce1 21 CMDQ_THR_PRIO_1>,
+				 <&gce1 22 CMDQ_THR_PRIO_1>;
+			#dma-cells = <1>;
+		};
+
+		display@14002000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14002000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+		};
+
+		display@14003000 {
+			compatible = "mediatek,mt8195-mdp3-stitch";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_STITCH>;
+		};
+
+		display@14004000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14004000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+		};
+
+		display@14005000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14005000 0 0x1000>;
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x5000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@14006000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14006000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>;
+		};
+
+		display@14007000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14007000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+		};
+
+		display@14008000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14008000 0 0x1000>;
+			interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x8000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@14009000 {
+			compatible = "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x9000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_OVL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_OVL>;
+		};
+
+		display@1400a000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x1400a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xa000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_PADDING>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@1400b000 {
+			compatible = "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x1400b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+		};
+
+		dma-controller@1400c000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x1400c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_WROT>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			#dma-cells = <1>;
 		};
 
 		mutex@1400f000 {
@@ -2077,6 +2276,7 @@
 			compatible = "mediatek,mt8195-vppsys1", "syscon";
 			reg = <0 0x14f00000 0 0x1000>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0 0x1000>;
 		};
 
 		mutex@14f01000 {
@@ -2112,6 +2312,289 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
 		};
 
+		display@14f06000 {
+			compatible = "mediatek,mt8195-mdp3-split";
+			reg = <0 0x14f06000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x6000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_VPP_SPLIT>,
+				 <&vppsys1 CLK_VPP1_HDMI_META>,
+				 <&vppsys1 CLK_VPP1_VPP_SPLIT_HDMI>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f07000 {
+			compatible = "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x14f07000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x7000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TCC>;
+		};
+
+		dma-controller@14f08000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f08000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x8000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RDMA>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f09000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f09000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x9000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RDMA>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f0a000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f0a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xa000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RDMA>;
+			iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		display@14f0b000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xb000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_FG>;
+		};
+
+		display@14f0c000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xc000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_FG>;
+		};
+
+		display@14f0d000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0d000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xd000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_FG>;
+		};
+
+		display@14f0e000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0e000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xe000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_HDR>;
+		};
+
+		display@14f0f000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0f000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xf000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_HDR>;
+		};
+
+		display@14f10000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f10000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_HDR>;
+		};
+
+		display@14f11000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f11000 0 0x1000>;
+			interrupts = <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f12000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f12000 0 0x1000>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x2000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f13000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f13000 0 0x1000>;
+			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x3000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f14000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f14000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RSZ>;
+		};
+
+		display@14f15000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f15000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>;
+		};
+
+		display@14f16000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f16000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>;
+		};
+
+		display@14f17000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f17000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x7000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TDSHP>;
+		};
+
+		display@14f18000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f18000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x8000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_TDSHP>;
+		};
+
+		display@14f19000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f19000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x9000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_TDSHP>;
+		};
+
+		display@14f1a000 {
+			compatible = "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xa000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_MERGE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1b000 {
+			compatible = "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xb000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_MERGE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1c000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1c000 0 0x1000>;
+			interrupts = <GIC_SPI 628 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xc000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1d000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1d000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xd000 0x1000>;
+			interrupts = <GIC_SPI 629 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1e000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1e000 0 0x1000>;
+			interrupts = <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xe000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1f000 {
+			compatible = "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14f1f000 0 0x1000>;
+			interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xf000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_OVL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_OVL>;
+		};
+
+		display@14f20000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f20000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f21000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f21000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f22000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f22000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x2000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		dma-controller@14f23000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f23000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x3000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_WROT>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f24000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f24000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>,
+					<CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f25000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f25000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>,
+					<CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>;
+			iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
 		imgsys: clock-controller@15000000 {
 			compatible = "mediatek,mt8195-imgsys";
 			reg = <0 0x15000000 0 0x1000>;
@@ -2553,7 +3036,7 @@
 			#size-cells = <2>;
 		};
 
-		jpgdec-master {
+		jpeg-decoder@1a040000 {
 			compatible = "mediatek,mt8195-jpgdec";
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
 			iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
@@ -2564,11 +3047,12 @@
 				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges;
+			ranges = <0 0 0 0x1a040000 0 0x20000>,
+				 <1 0 0 0x1b040000 0 0x10000>;
 
-			jpgdec@1a040000 {
+			jpgdec@0,0 {
 				compatible = "mediatek,mt8195-jpgdec-hw";
-				reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */
+				reg = <0 0 0 0x10000>;/* JPGDEC_C0 */
 				iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
 					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
 					 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
@@ -2581,9 +3065,9 @@
 				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
 			};
 
-			jpgdec@1a050000 {
+			jpgdec@0,10000 {
 				compatible = "mediatek,mt8195-jpgdec-hw";
-				reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */
+				reg = <0 0 0x10000 0x10000>;/* JPGDEC_C1 */
 				iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
 					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
 					 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
@@ -2596,9 +3080,9 @@
 				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
 			};
 
-			jpgdec@1b040000 {
+			jpgdec@1,0 {
 				compatible = "mediatek,mt8195-jpgdec-hw";
-				reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */
+				reg = <1 0 0 0x10000>;/* JPGDEC_C2 */
 				iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>,
 					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>,
 					 <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>,
@@ -2623,10 +3107,11 @@
 			reg = <0 0x1c01a000 0 0x1000>;
 			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xa000 0x1000>;
 		};
 
 
-		jpgenc-master {
+		jpeg-encoder@1a030000 {
 			compatible = "mediatek,mt8195-jpgenc";
 			power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
 			iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
@@ -2635,11 +3120,12 @@
 					<&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges;
+			ranges = <0 0 0 0x1a030000 0 0x10000>,
+				 <1 0 0 0x1b030000 0 0x10000>;
 
-			jpgenc@1a030000 {
+			jpgenc@0,0 {
 				compatible = "mediatek,mt8195-jpgenc-hw";
-				reg = <0 0x1a030000 0 0x10000>;
+				reg = <0 0 0 0x10000>;
 				iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>,
 						<&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>,
 						<&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>,
@@ -2650,9 +3136,9 @@
 				power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
 			};
 
-			jpgenc@1b030000 {
+			jpgenc@1,0 {
 				compatible = "mediatek,mt8195-jpgenc-hw";
-				reg = <0 0x1b030000 0 0x10000>;
+				reg = <1 0 0 0x10000>;
 				iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
 						<&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
 						<&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
@@ -2677,13 +3163,30 @@
 		};
 
 		ovl0: ovl@1c000000 {
-			compatible = "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl";
+			compatible = "mediatek,mt8195-disp-ovl";
 			reg = <0 0x1c000000 0 0x1000>;
 			interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_OVL0>;
 			iommus = <&iommu_vdo M4U_PORT_L0_DISP_OVL0_RDMA0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x0000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl0_in: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl0_out: endpoint {
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
 		};
 
 		rdma0: rdma@1c002000 {
@@ -2694,6 +3197,25 @@
 			clocks = <&vdosys0 CLK_VDO0_DISP_RDMA0>;
 			iommus = <&iommu_vdo M4U_PORT_L0_DISP_RDMA0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x2000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma0_in: endpoint {
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma0_out: endpoint {
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
 		};
 
 		color0: color@1c003000 {
@@ -2703,6 +3225,25 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_COLOR0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x3000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					color0_in: endpoint {
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					color0_out: endpoint {
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
 		};
 
 		ccorr0: ccorr@1c004000 {
@@ -2712,6 +3253,25 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_CCORR0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x4000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ccorr0_in: endpoint {
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ccorr0_out: endpoint {
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
 		};
 
 		aal0: aal@1c005000 {
@@ -2721,6 +3281,25 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_AAL0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x5000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					aal0_in: endpoint {
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					aal0_out: endpoint {
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
 		};
 
 		gamma0: gamma@1c006000 {
@@ -2730,6 +3309,25 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_GAMMA0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x6000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					gamma0_in: endpoint {
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					gamma0_out: endpoint {
+						remote-endpoint = <&dither0_in>;
+					};
+				};
+			};
 		};
 
 		dither0: dither@1c007000 {
@@ -2739,6 +3337,37 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_DITHER0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dither0_in: endpoint {
+						remote-endpoint = <&gamma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dither0_out: endpoint { };
+				};
+			};
+		};
+
+		dsi0: dsi@1c008000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c008000 0 0x1000>;
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI0>,
+				 <&vdosys0 CLK_VDO0_DSI0_DSI>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
 		};
 
 		dsc0: dsc@1c009000 {
@@ -2750,6 +3379,20 @@
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>;
 		};
 
+		dsi1: dsi@1c012000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c012000 0 0x1000>;
+			interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI1>,
+				 <&vdosys0 CLK_VDO0_DSI1_DSI>,
+				 <&mipi_tx1>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx1>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
 		merge0: merge@1c014000 {
 			compatible = "mediatek,mt8195-disp-merge";
 			reg = <0 0x1c014000 0 0x1000>;
@@ -2763,10 +3406,11 @@
 			compatible = "mediatek,mt8195-dp-intf";
 			reg = <0 0x1c015000 0 0x1000>;
 			interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&vdosys0  CLK_VDO0_DP_INTF0>,
-				 <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+				 <&vdosys0  CLK_VDO0_DP_INTF0>,
 				 <&apmixedsys CLK_APMIXED_TVDPLL1>;
-			clock-names = "engine", "pixel", "pll";
+			clock-names = "pixel", "engine", "pll";
 			status = "disabled";
 		};
 
@@ -2776,6 +3420,7 @@
 			interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x6000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>;
 		};
 
@@ -2841,11 +3486,10 @@
 		mutex1: mutex@1c101000 {
 			compatible = "mediatek,mt8195-disp-mutex";
 			reg = <0 0x1c101000 0 0x1000>;
-			reg-names = "vdo1_mutex";
 			interrupts = <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
-			clock-names = "vdo1_mutex";
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
 		};
 
@@ -2873,7 +3517,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 		};
 
-		vdo1_rdma0: rdma@1c104000 {
+		vdo1_rdma0: dma-controller@1c104000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c104000 0 0x1000>;
 			interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2881,9 +3525,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma1: rdma@1c105000 {
+		vdo1_rdma1: dma-controller@1c105000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c105000 0 0x1000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2891,9 +3536,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma2: rdma@1c106000 {
+		vdo1_rdma2: dma-controller@1c106000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c106000 0 0x1000>;
 			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2901,9 +3547,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma3: rdma@1c107000 {
+		vdo1_rdma3: dma-controller@1c107000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c107000 0 0x1000>;
 			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2911,9 +3558,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma4: rdma@1c108000 {
+		vdo1_rdma4: dma-controller@1c108000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c108000 0 0x1000>;
 			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2921,9 +3569,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma5: rdma@1c109000 {
+		vdo1_rdma5: dma-controller@1c109000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c109000 0 0x1000>;
 			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2931,9 +3580,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma6: rdma@1c10a000 {
+		vdo1_rdma6: dma-controller@1c10a000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c10a000 0 0x1000>;
 			interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2941,9 +3591,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma7: rdma@1c10b000 {
+		vdo1_rdma7: dma-controller@1c10b000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c10b000 0 0x1000>;
 			interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2951,6 +3602,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+			#dma-cells = <1>;
 		};
 
 		merge1: vpp-merge@1c10c000 {
@@ -3023,10 +3675,10 @@
 			reg = <0 0x1c113000 0 0x1000>;
 			interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
-			clocks = <&vdosys1 CLK_VDO1_DP_INTF0_MM>,
-				 <&vdosys1 CLK_VDO1_DPINTF>,
+			clocks = <&vdosys1 CLK_VDO1_DPINTF>,
+				 <&vdosys1 CLK_VDO1_DP_INTF0_MM>,
 				 <&apmixedsys CLK_APMIXED_TVDPLL2>;
-			clock-names = "engine", "pixel", "pll";
+			clock-names = "pixel", "engine", "pll";
 			status = "disabled";
 		};
 
@@ -3382,7 +4034,7 @@
 			};
 		};
 
-		gpu0-thermal {
+		gpu-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <250>;
 			thermal-sensors = <&lvts_ap MT8195_AP_GPU0>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h
new file mode 100644
index 000000000000..99535a6d5cba
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h
@@ -0,0 +1,1574 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Guodong Liu <guodong.liu@mediatek.com>
+ *         Lei Xue <lei.xue@mediatek.com>
+ *         Cathy Xu <ot_cathy.xu@mediatek.com>
+ */
+
+#ifndef __MT8196_PINFUNC_H
+#define __MT8196_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define PINMUX_GPIO0__FUNC_DMIC1_CLK (MTK_PIN_NO(0) | 1)
+#define PINMUX_GPIO0__FUNC_SPI3_A_MO (MTK_PIN_NO(0) | 3)
+#define PINMUX_GPIO0__FUNC_FMI2S_B_LRCK (MTK_PIN_NO(0) | 4)
+#define PINMUX_GPIO0__FUNC_SCP_DMIC1_CLK (MTK_PIN_NO(0) | 5)
+#define PINMUX_GPIO0__FUNC_TP_GPIO14_AO (MTK_PIN_NO(0) | 6)
+
+#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define PINMUX_GPIO1__FUNC_DMIC1_DAT (MTK_PIN_NO(1) | 1)
+#define PINMUX_GPIO1__FUNC_SRCLKENAI1 (MTK_PIN_NO(1) | 2)
+#define PINMUX_GPIO1__FUNC_SPI3_A_MI (MTK_PIN_NO(1) | 3)
+#define PINMUX_GPIO1__FUNC_FMI2S_B_DI (MTK_PIN_NO(1) | 4)
+#define PINMUX_GPIO1__FUNC_SCP_DMIC1_DAT (MTK_PIN_NO(1) | 5)
+#define PINMUX_GPIO1__FUNC_TP_GPIO15_AO (MTK_PIN_NO(1) | 6)
+
+#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define PINMUX_GPIO2__FUNC_PWM_VLP (MTK_PIN_NO(2) | 1)
+#define PINMUX_GPIO2__FUNC_DSI_HSYNC (MTK_PIN_NO(2) | 2)
+#define PINMUX_GPIO2__FUNC_RG_TSFDC_LDO_EN (MTK_PIN_NO(2) | 5)
+#define PINMUX_GPIO2__FUNC_TP_GPIO8_AO (MTK_PIN_NO(2) | 6)
+
+#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define PINMUX_GPIO3__FUNC_MD_INT0 (MTK_PIN_NO(3) | 1)
+#define PINMUX_GPIO3__FUNC_DSI1_HSYNC (MTK_PIN_NO(3) | 2)
+#define PINMUX_GPIO3__FUNC_DA_TSFDC_LDO_MODE (MTK_PIN_NO(3) | 5)
+#define PINMUX_GPIO3__FUNC_TP_GPIO9_AO (MTK_PIN_NO(3) | 6)
+
+#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define PINMUX_GPIO4__FUNC_DISP_PWM1 (MTK_PIN_NO(4) | 1)
+#define PINMUX_GPIO4__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(4) | 2)
+
+#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define PINMUX_GPIO5__FUNC_LCM1_RST (MTK_PIN_NO(5) | 1)
+#define PINMUX_GPIO5__FUNC_SPI7_A_CLK (MTK_PIN_NO(5) | 2)
+
+#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define PINMUX_GPIO6__FUNC_DSI1_TE (MTK_PIN_NO(6) | 1)
+#define PINMUX_GPIO6__FUNC_SPI7_A_CSB (MTK_PIN_NO(6) | 2)
+
+#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define PINMUX_GPIO7__FUNC_SPI7_A_MO (MTK_PIN_NO(7) | 2)
+#define PINMUX_GPIO7__FUNC_GPS_PPS0 (MTK_PIN_NO(7) | 3)
+
+#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define PINMUX_GPIO8__FUNC_SPI7_A_MI (MTK_PIN_NO(8) | 2)
+#define PINMUX_GPIO8__FUNC_EDP_TX_HPD (MTK_PIN_NO(8) | 3)
+
+#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define PINMUX_GPIO9__FUNC_I2SIN1_LRCK (MTK_PIN_NO(9) | 3)
+#define PINMUX_GPIO9__FUNC_RG_TSFDC_LDO_REFSEL0 (MTK_PIN_NO(9) | 7)
+
+#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define PINMUX_GPIO10__FUNC_I2SOUT1_DO (MTK_PIN_NO(10) | 3)
+#define PINMUX_GPIO10__FUNC_RG_TSFDC_LDO_REFSEL1 (MTK_PIN_NO(10) | 7)
+
+#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define PINMUX_GPIO11__FUNC_FMI2S_B_BCK (MTK_PIN_NO(11) | 4)
+#define PINMUX_GPIO11__FUNC_DBG_MON_A30 (MTK_PIN_NO(11) | 7)
+
+#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define PINMUX_GPIO12__FUNC_I2SIN1_DI_B (MTK_PIN_NO(12) | 3)
+
+#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define PINMUX_GPIO13__FUNC_EDP_TX_HPD (MTK_PIN_NO(13) | 1)
+#define PINMUX_GPIO13__FUNC_GPS_PPS1 (MTK_PIN_NO(13) | 2)
+
+#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define PINMUX_GPIO14__FUNC_SRCLKENA2 (MTK_PIN_NO(14) | 1)
+#define PINMUX_GPIO14__FUNC_DSI2_TE (MTK_PIN_NO(14) | 2)
+#define PINMUX_GPIO14__FUNC_SPMI_P_TRIG_FLAG (MTK_PIN_NO(14) | 3)
+#define PINMUX_GPIO14__FUNC_MD_INT3 (MTK_PIN_NO(14) | 5)
+#define PINMUX_GPIO14__FUNC_TP_GPIO8_AO (MTK_PIN_NO(14) | 6)
+
+#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define PINMUX_GPIO15__FUNC_SRCLKENAI0 (MTK_PIN_NO(15) | 1)
+#define PINMUX_GPIO15__FUNC_SPMI_M_TRIG_FLAG (MTK_PIN_NO(15) | 2)
+#define PINMUX_GPIO15__FUNC_UCTS0 (MTK_PIN_NO(15) | 3)
+#define PINMUX_GPIO15__FUNC_MD_INT4 (MTK_PIN_NO(15) | 4)
+#define PINMUX_GPIO15__FUNC_I2SOUT2_DO (MTK_PIN_NO(15) | 5)
+#define PINMUX_GPIO15__FUNC_TP_GPIO9_AO (MTK_PIN_NO(15) | 6)
+
+#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define PINMUX_GPIO16__FUNC_SRCLKENAI1 (MTK_PIN_NO(16) | 1)
+#define PINMUX_GPIO16__FUNC_DP_TX_HPD (MTK_PIN_NO(16) | 2)
+#define PINMUX_GPIO16__FUNC_URTS0 (MTK_PIN_NO(16) | 3)
+#define PINMUX_GPIO16__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(16) | 4)
+#define PINMUX_GPIO16__FUNC_KPROW2 (MTK_PIN_NO(16) | 5)
+#define PINMUX_GPIO16__FUNC_TP_GPIO10_AO (MTK_PIN_NO(16) | 6)
+
+#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define PINMUX_GPIO17__FUNC_MD_INT0 (MTK_PIN_NO(17) | 1)
+#define PINMUX_GPIO17__FUNC_DP_OC_EN (MTK_PIN_NO(17) | 2)
+#define PINMUX_GPIO17__FUNC_UCTS1 (MTK_PIN_NO(17) | 3)
+#define PINMUX_GPIO17__FUNC_MD_NTN_URXD1 (MTK_PIN_NO(17) | 4)
+#define PINMUX_GPIO17__FUNC_KPCOL2 (MTK_PIN_NO(17) | 5)
+#define PINMUX_GPIO17__FUNC_TP_GPIO11_AO (MTK_PIN_NO(17) | 6)
+
+#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define PINMUX_GPIO18__FUNC_DMIC1_CLK (MTK_PIN_NO(18) | 1)
+#define PINMUX_GPIO18__FUNC_DP_RAUX_SBU1 (MTK_PIN_NO(18) | 2)
+#define PINMUX_GPIO18__FUNC_URTS1 (MTK_PIN_NO(18) | 3)
+#define PINMUX_GPIO18__FUNC_MD_NTN_UTXD1 (MTK_PIN_NO(18) | 4)
+#define PINMUX_GPIO18__FUNC_I2SIN2_DI (MTK_PIN_NO(18) | 5)
+#define PINMUX_GPIO18__FUNC_TP_UTXD_GNSS_VLP (MTK_PIN_NO(18) | 6)
+
+#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define PINMUX_GPIO19__FUNC_DMIC1_DAT (MTK_PIN_NO(19) | 1)
+#define PINMUX_GPIO19__FUNC_DP_RAUX_SBU2 (MTK_PIN_NO(19) | 2)
+#define PINMUX_GPIO19__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(19) | 3)
+#define PINMUX_GPIO19__FUNC_CLKM3_A (MTK_PIN_NO(19) | 4)
+#define PINMUX_GPIO19__FUNC_I2SIN2_BCK (MTK_PIN_NO(19) | 5)
+#define PINMUX_GPIO19__FUNC_TP_URXD_GNSS_VLP (MTK_PIN_NO(19) | 6)
+
+#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define PINMUX_GPIO20__FUNC_IDDIG (MTK_PIN_NO(20) | 1)
+#define PINMUX_GPIO20__FUNC_LCM2_RST (MTK_PIN_NO(20) | 2)
+#define PINMUX_GPIO20__FUNC_GPS_PPS1 (MTK_PIN_NO(20) | 3)
+#define PINMUX_GPIO20__FUNC_CLKM2_A (MTK_PIN_NO(20) | 4)
+
+#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define PINMUX_GPIO21__FUNC_BPI_BUS11 (MTK_PIN_NO(21) | 1)
+#define PINMUX_GPIO21__FUNC_PCIE_PERSTN_1P (MTK_PIN_NO(21) | 2)
+#define PINMUX_GPIO21__FUNC_DSI1_TE (MTK_PIN_NO(21) | 3)
+#define PINMUX_GPIO21__FUNC_DMIC_CLK (MTK_PIN_NO(21) | 4)
+#define PINMUX_GPIO21__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(21) | 5)
+
+#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define PINMUX_GPIO22__FUNC_BPI_BUS12 (MTK_PIN_NO(22) | 1)
+#define PINMUX_GPIO22__FUNC_PCIE_CLKREQN_1P (MTK_PIN_NO(22) | 2)
+#define PINMUX_GPIO22__FUNC_DSI2_TE (MTK_PIN_NO(22) | 3)
+#define PINMUX_GPIO22__FUNC_DMIC_DAT (MTK_PIN_NO(22) | 4)
+#define PINMUX_GPIO22__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(22) | 5)
+
+#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define PINMUX_GPIO23__FUNC_BPI_BUS13 (MTK_PIN_NO(23) | 1)
+#define PINMUX_GPIO23__FUNC_PCIE_WAKEN_1P (MTK_PIN_NO(23) | 2)
+#define PINMUX_GPIO23__FUNC_DSI3_TE (MTK_PIN_NO(23) | 3)
+#define PINMUX_GPIO23__FUNC_DMIC1_CLK (MTK_PIN_NO(23) | 4)
+#define PINMUX_GPIO23__FUNC_SCP_DMIC1_CLK (MTK_PIN_NO(23) | 5)
+
+#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define PINMUX_GPIO24__FUNC_BPI_BUS14 (MTK_PIN_NO(24) | 1)
+#define PINMUX_GPIO24__FUNC_LCM1_RST (MTK_PIN_NO(24) | 2)
+#define PINMUX_GPIO24__FUNC_AGPS_SYNC (MTK_PIN_NO(24) | 3)
+#define PINMUX_GPIO24__FUNC_DMIC1_DAT (MTK_PIN_NO(24) | 4)
+#define PINMUX_GPIO24__FUNC_SCP_DMIC1_DAT (MTK_PIN_NO(24) | 5)
+#define PINMUX_GPIO24__FUNC_DISP_PWM1 (MTK_PIN_NO(24) | 6)
+
+#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define PINMUX_GPIO25__FUNC_BPI_BUS15 (MTK_PIN_NO(25) | 1)
+#define PINMUX_GPIO25__FUNC_LCM2_RST (MTK_PIN_NO(25) | 2)
+#define PINMUX_GPIO25__FUNC_SRCLKENAI1 (MTK_PIN_NO(25) | 3)
+#define PINMUX_GPIO25__FUNC_DMIC2_CLK (MTK_PIN_NO(25) | 4)
+#define PINMUX_GPIO25__FUNC_DISP_PWM2 (MTK_PIN_NO(25) | 6)
+
+#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define PINMUX_GPIO26__FUNC_BPI_BUS16 (MTK_PIN_NO(26) | 1)
+#define PINMUX_GPIO26__FUNC_LCM3_RST (MTK_PIN_NO(26) | 2)
+#define PINMUX_GPIO26__FUNC_DMIC2_DAT (MTK_PIN_NO(26) | 4)
+#define PINMUX_GPIO26__FUNC_DISP_PWM3 (MTK_PIN_NO(26) | 6)
+
+#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define PINMUX_GPIO27__FUNC_BPI_BUS17 (MTK_PIN_NO(27) | 1)
+#define PINMUX_GPIO27__FUNC_UTXD4 (MTK_PIN_NO(27) | 2)
+#define PINMUX_GPIO27__FUNC_DISP_PWM4 (MTK_PIN_NO(27) | 6)
+#define PINMUX_GPIO27__FUNC_DBG_MON_A20 (MTK_PIN_NO(27) | 7)
+
+#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define PINMUX_GPIO28__FUNC_BPI_BUS18 (MTK_PIN_NO(28) | 1)
+#define PINMUX_GPIO28__FUNC_URXD4 (MTK_PIN_NO(28) | 2)
+#define PINMUX_GPIO28__FUNC_SPI2_A_MI (MTK_PIN_NO(28) | 3)
+#define PINMUX_GPIO28__FUNC_CLKM0_A (MTK_PIN_NO(28) | 4)
+#define PINMUX_GPIO28__FUNC_DBG_MON_A21 (MTK_PIN_NO(28) | 7)
+
+#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define PINMUX_GPIO29__FUNC_BPI_BUS19 (MTK_PIN_NO(29) | 1)
+#define PINMUX_GPIO29__FUNC_MD_NTN_UTXD1 (MTK_PIN_NO(29) | 2)
+#define PINMUX_GPIO29__FUNC_SPI2_A_MO (MTK_PIN_NO(29) | 3)
+#define PINMUX_GPIO29__FUNC_CLKM1_A (MTK_PIN_NO(29) | 4)
+#define PINMUX_GPIO29__FUNC_UCTS4 (MTK_PIN_NO(29) | 6)
+#define PINMUX_GPIO29__FUNC_DBG_MON_A17 (MTK_PIN_NO(29) | 7)
+
+#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define PINMUX_GPIO30__FUNC_BPI_BUS20 (MTK_PIN_NO(30) | 1)
+#define PINMUX_GPIO30__FUNC_MD_NTN_URXD1 (MTK_PIN_NO(30) | 2)
+#define PINMUX_GPIO30__FUNC_SPI2_A_CLK (MTK_PIN_NO(30) | 3)
+#define PINMUX_GPIO30__FUNC_CLKM2_A (MTK_PIN_NO(30) | 4)
+#define PINMUX_GPIO30__FUNC_DSI3_HSYNC (MTK_PIN_NO(30) | 5)
+#define PINMUX_GPIO30__FUNC_URTS4 (MTK_PIN_NO(30) | 6)
+#define PINMUX_GPIO30__FUNC_DBG_MON_A18 (MTK_PIN_NO(30) | 7)
+
+#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define PINMUX_GPIO31__FUNC_BPI_BUS21 (MTK_PIN_NO(31) | 1)
+#define PINMUX_GPIO31__FUNC_SPI2_A_CSB (MTK_PIN_NO(31) | 3)
+#define PINMUX_GPIO31__FUNC_CLKM3_A (MTK_PIN_NO(31) | 4)
+#define PINMUX_GPIO31__FUNC_EDP_TX_HPD (MTK_PIN_NO(31) | 6)
+#define PINMUX_GPIO31__FUNC_DBG_MON_A19 (MTK_PIN_NO(31) | 7)
+
+#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define PINMUX_GPIO32__FUNC_LCM4_RST (MTK_PIN_NO(32) | 1)
+#define PINMUX_GPIO32__FUNC_DP_TX_HPD (MTK_PIN_NO(32) | 2)
+#define PINMUX_GPIO32__FUNC_SSPM_JTAG_TCK_VLP (MTK_PIN_NO(32) | 3)
+#define PINMUX_GPIO32__FUNC_ADSP_JTAG0_TCK (MTK_PIN_NO(32) | 4)
+#define PINMUX_GPIO32__FUNC_SCP_JTAG0_TCK_VLP (MTK_PIN_NO(32) | 5)
+#define PINMUX_GPIO32__FUNC_SPU0_TCK (MTK_PIN_NO(32) | 6)
+#define PINMUX_GPIO32__FUNC_IO_JTAG_TCK (MTK_PIN_NO(32) | 7)
+
+#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define PINMUX_GPIO33__FUNC_DSI4_TE (MTK_PIN_NO(33) | 1)
+#define PINMUX_GPIO33__FUNC_DP_OC_EN (MTK_PIN_NO(33) | 2)
+#define PINMUX_GPIO33__FUNC_SSPM_JTAG_TRSTN_VLP (MTK_PIN_NO(33) | 3)
+#define PINMUX_GPIO33__FUNC_ADSP_JTAG0_TRSTN (MTK_PIN_NO(33) | 4)
+#define PINMUX_GPIO33__FUNC_SCP_JTAG0_TRSTN_VLP (MTK_PIN_NO(33) | 5)
+#define PINMUX_GPIO33__FUNC_SPU0_NTRST (MTK_PIN_NO(33) | 6)
+#define PINMUX_GPIO33__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(33) | 7)
+
+#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define PINMUX_GPIO34__FUNC_UCTS5 (MTK_PIN_NO(34) | 1)
+#define PINMUX_GPIO34__FUNC_DP_RAUX_SBU1 (MTK_PIN_NO(34) | 2)
+#define PINMUX_GPIO34__FUNC_SSPM_JTAG_TDI_VLP (MTK_PIN_NO(34) | 3)
+#define PINMUX_GPIO34__FUNC_ADSP_JTAG0_TDI (MTK_PIN_NO(34) | 4)
+#define PINMUX_GPIO34__FUNC_SCP_JTAG0_TDI_VLP (MTK_PIN_NO(34) | 5)
+#define PINMUX_GPIO34__FUNC_SPU0_TDI (MTK_PIN_NO(34) | 6)
+#define PINMUX_GPIO34__FUNC_IO_JTAG_TDI (MTK_PIN_NO(34) | 7)
+
+#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define PINMUX_GPIO35__FUNC_URTS5 (MTK_PIN_NO(35) | 1)
+#define PINMUX_GPIO35__FUNC_DP_RAUX_SBU2 (MTK_PIN_NO(35) | 2)
+#define PINMUX_GPIO35__FUNC_SSPM_JTAG_TDO_VLP (MTK_PIN_NO(35) | 3)
+#define PINMUX_GPIO35__FUNC_ADSP_JTAG0_TDO (MTK_PIN_NO(35) | 4)
+#define PINMUX_GPIO35__FUNC_SCP_JTAG0_TDO_VLP (MTK_PIN_NO(35) | 5)
+#define PINMUX_GPIO35__FUNC_SPU0_TDO (MTK_PIN_NO(35) | 6)
+#define PINMUX_GPIO35__FUNC_IO_JTAG_TDO (MTK_PIN_NO(35) | 7)
+
+#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define PINMUX_GPIO36__FUNC_UTXD5 (MTK_PIN_NO(36) | 1)
+#define PINMUX_GPIO36__FUNC_SSPM_JTAG_TMS_VLP (MTK_PIN_NO(36) | 3)
+#define PINMUX_GPIO36__FUNC_ADSP_JTAG0_TMS (MTK_PIN_NO(36) | 4)
+#define PINMUX_GPIO36__FUNC_SCP_JTAG0_TMS_VLP (MTK_PIN_NO(36) | 5)
+#define PINMUX_GPIO36__FUNC_SPU0_TMS (MTK_PIN_NO(36) | 6)
+#define PINMUX_GPIO36__FUNC_IO_JTAG_TMS (MTK_PIN_NO(36) | 7)
+
+#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define PINMUX_GPIO37__FUNC_URXD5 (MTK_PIN_NO(37) | 1)
+#define PINMUX_GPIO37__FUNC_MD_INT3 (MTK_PIN_NO(37) | 3)
+#define PINMUX_GPIO37__FUNC_CLKM0_B (MTK_PIN_NO(37) | 4)
+#define PINMUX_GPIO37__FUNC_TP_GPIO5_AO (MTK_PIN_NO(37) | 5)
+#define PINMUX_GPIO37__FUNC_SPU0_UTX (MTK_PIN_NO(37) | 6)
+#define PINMUX_GPIO37__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(37) | 7)
+
+#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define PINMUX_GPIO38__FUNC_SPMI_P_TRIG_FLAG (MTK_PIN_NO(38) | 2)
+#define PINMUX_GPIO38__FUNC_MD_INT4 (MTK_PIN_NO(38) | 3)
+#define PINMUX_GPIO38__FUNC_CLKM1_B (MTK_PIN_NO(38) | 4)
+#define PINMUX_GPIO38__FUNC_TP_GPIO6_AO (MTK_PIN_NO(38) | 5)
+#define PINMUX_GPIO38__FUNC_SPU0_URX (MTK_PIN_NO(38) | 6)
+#define PINMUX_GPIO38__FUNC_DAP_MD32_SWD (MTK_PIN_NO(38) | 7)
+
+#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define PINMUX_GPIO39__FUNC_I2S_MCK0 (MTK_PIN_NO(39) | 1)
+#define PINMUX_GPIO39__FUNC_GPS_PPS0 (MTK_PIN_NO(39) | 3)
+#define PINMUX_GPIO39__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(39) | 4)
+#define PINMUX_GPIO39__FUNC_DBG_MON_B12 (MTK_PIN_NO(39) | 7)
+
+#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define PINMUX_GPIO40__FUNC_I2SIN6_0_BCK (MTK_PIN_NO(40) | 1)
+#define PINMUX_GPIO40__FUNC_SPI4_B_CLK (MTK_PIN_NO(40) | 3)
+#define PINMUX_GPIO40__FUNC_UCTS2 (MTK_PIN_NO(40) | 4)
+#define PINMUX_GPIO40__FUNC_CCU1_UTXD (MTK_PIN_NO(40) | 5)
+#define PINMUX_GPIO40__FUNC_DBG_MON_B13 (MTK_PIN_NO(40) | 7)
+
+#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define PINMUX_GPIO41__FUNC_I2SIN6_0_LRCK (MTK_PIN_NO(41) | 1)
+#define PINMUX_GPIO41__FUNC_SPI4_B_CSB (MTK_PIN_NO(41) | 3)
+#define PINMUX_GPIO41__FUNC_URTS2 (MTK_PIN_NO(41) | 4)
+#define PINMUX_GPIO41__FUNC_CCU1_URXD (MTK_PIN_NO(41) | 5)
+#define PINMUX_GPIO41__FUNC_DBG_MON_B14 (MTK_PIN_NO(41) | 7)
+
+#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define PINMUX_GPIO42__FUNC_I2SIN6_0_DI (MTK_PIN_NO(42) | 1)
+#define PINMUX_GPIO42__FUNC_SPI4_B_MI (MTK_PIN_NO(42) | 3)
+#define PINMUX_GPIO42__FUNC_URXD2 (MTK_PIN_NO(42) | 4)
+#define PINMUX_GPIO42__FUNC_CCU1_URTS (MTK_PIN_NO(42) | 5)
+#define PINMUX_GPIO42__FUNC_MD32_0_RXD (MTK_PIN_NO(42) | 6)
+#define PINMUX_GPIO42__FUNC_DBG_MON_B15 (MTK_PIN_NO(42) | 7)
+
+#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define PINMUX_GPIO43__FUNC_I2SOUT6_0_DO (MTK_PIN_NO(43) | 1)
+#define PINMUX_GPIO43__FUNC_SPI4_B_MO (MTK_PIN_NO(43) | 3)
+#define PINMUX_GPIO43__FUNC_UTXD2 (MTK_PIN_NO(43) | 4)
+#define PINMUX_GPIO43__FUNC_CCU1_UCTS (MTK_PIN_NO(43) | 5)
+#define PINMUX_GPIO43__FUNC_MD32_0_TXD (MTK_PIN_NO(43) | 6)
+#define PINMUX_GPIO43__FUNC_DBG_MON_B16 (MTK_PIN_NO(43) | 7)
+
+#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define PINMUX_GPIO44__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(44) | 1)
+#define PINMUX_GPIO44__FUNC_SPI3_A_CLK (MTK_PIN_NO(44) | 3)
+#define PINMUX_GPIO44__FUNC_TP_GPIO10_AO (MTK_PIN_NO(44) | 6)
+
+#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define PINMUX_GPIO45__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(45) | 1)
+#define PINMUX_GPIO45__FUNC_DSI2_HSYNC (MTK_PIN_NO(45) | 2)
+#define PINMUX_GPIO45__FUNC_SPI3_A_CSB (MTK_PIN_NO(45) | 3)
+#define PINMUX_GPIO45__FUNC_PWM_VLP (MTK_PIN_NO(45) | 4)
+#define PINMUX_GPIO45__FUNC_TP_GPIO11_AO (MTK_PIN_NO(45) | 6)
+
+#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define PINMUX_GPIO46__FUNC_SCP_SCL4 (MTK_PIN_NO(46) | 1)
+#define PINMUX_GPIO46__FUNC_PWM_VLP (MTK_PIN_NO(46) | 2)
+#define PINMUX_GPIO46__FUNC_SCP_ILDO_DTEST1_VLP (MTK_PIN_NO(46) | 4)
+#define PINMUX_GPIO46__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(46) | 5)
+#define PINMUX_GPIO46__FUNC_TP_GPIO0_AO (MTK_PIN_NO(46) | 6)
+
+#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define PINMUX_GPIO47__FUNC_SCP_SDA4 (MTK_PIN_NO(47) | 1)
+#define PINMUX_GPIO47__FUNC_SCP_ILDO_DTEST2_VLP (MTK_PIN_NO(47) | 4)
+#define PINMUX_GPIO47__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(47) | 5)
+#define PINMUX_GPIO47__FUNC_TP_GPIO1_AO (MTK_PIN_NO(47) | 6)
+
+#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define PINMUX_GPIO48__FUNC_SCP_SCL5 (MTK_PIN_NO(48) | 1)
+#define PINMUX_GPIO48__FUNC_PWM_VLP (MTK_PIN_NO(48) | 2)
+#define PINMUX_GPIO48__FUNC_CCU0_UTXD (MTK_PIN_NO(48) | 3)
+#define PINMUX_GPIO48__FUNC_SCP_ILDO_DTEST3_VLP (MTK_PIN_NO(48) | 4)
+#define PINMUX_GPIO48__FUNC_TP_GPIO2_AO (MTK_PIN_NO(48) | 6)
+
+#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define PINMUX_GPIO49__FUNC_SCP_SDA5 (MTK_PIN_NO(49) | 1)
+#define PINMUX_GPIO49__FUNC_CCU0_URXD (MTK_PIN_NO(49) | 3)
+#define PINMUX_GPIO49__FUNC_SCP_ILDO_DTEST4_VLP (MTK_PIN_NO(49) | 4)
+#define PINMUX_GPIO49__FUNC_TP_GPIO3_AO (MTK_PIN_NO(49) | 6)
+
+#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define PINMUX_GPIO50__FUNC_SCP_SCL6 (MTK_PIN_NO(50) | 1)
+#define PINMUX_GPIO50__FUNC_PWM_VLP (MTK_PIN_NO(50) | 2)
+#define PINMUX_GPIO50__FUNC_CCU0_URTS (MTK_PIN_NO(50) | 3)
+#define PINMUX_GPIO50__FUNC_DSI_HSYNC (MTK_PIN_NO(50) | 4)
+#define PINMUX_GPIO50__FUNC_TP_GPIO4_AO (MTK_PIN_NO(50) | 6)
+
+#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define PINMUX_GPIO51__FUNC_SCP_SDA6 (MTK_PIN_NO(51) | 1)
+#define PINMUX_GPIO51__FUNC_CCU0_UCTS (MTK_PIN_NO(51) | 3)
+#define PINMUX_GPIO51__FUNC_DSI1_HSYNC (MTK_PIN_NO(51) | 4)
+#define PINMUX_GPIO51__FUNC_TP_GPIO5_AO (MTK_PIN_NO(51) | 6)
+
+#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define PINMUX_GPIO52__FUNC_SCP_SCL1 (MTK_PIN_NO(52) | 1)
+#define PINMUX_GPIO52__FUNC_TDM_DATA2 (MTK_PIN_NO(52) | 3)
+
+#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define PINMUX_GPIO53__FUNC_SCP_SDA1 (MTK_PIN_NO(53) | 1)
+#define PINMUX_GPIO53__FUNC_TDM_DATA3 (MTK_PIN_NO(53) | 3)
+
+#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define PINMUX_GPIO54__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(54) | 1)
+#define PINMUX_GPIO54__FUNC_TDM_MCK (MTK_PIN_NO(54) | 3)
+
+#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define PINMUX_GPIO55__FUNC_AUD_CLK_MISO (MTK_PIN_NO(55) | 1)
+#define PINMUX_GPIO55__FUNC_I2SOUT2_BCK (MTK_PIN_NO(55) | 2)
+#define PINMUX_GPIO55__FUNC_TDM_BCK (MTK_PIN_NO(55) | 3)
+
+#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define PINMUX_GPIO56__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(56) | 1)
+#define PINMUX_GPIO56__FUNC_I2SOUT2_LRCK (MTK_PIN_NO(56) | 2)
+#define PINMUX_GPIO56__FUNC_TDM_LRCK (MTK_PIN_NO(56) | 3)
+
+#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define PINMUX_GPIO57__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(57) | 1)
+#define PINMUX_GPIO57__FUNC_I2SOUT2_DO (MTK_PIN_NO(57) | 2)
+#define PINMUX_GPIO57__FUNC_TDM_DATA0 (MTK_PIN_NO(57) | 3)
+
+#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define PINMUX_GPIO58__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(58) | 1)
+#define PINMUX_GPIO58__FUNC_TDM_DATA1 (MTK_PIN_NO(58) | 3)
+
+#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define PINMUX_GPIO59__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(59) | 1)
+#define PINMUX_GPIO59__FUNC_I2SIN1_BCK (MTK_PIN_NO(59) | 3)
+
+#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define PINMUX_GPIO60__FUNC_KPCOL0 (MTK_PIN_NO(60) | 1)
+#define PINMUX_GPIO60__FUNC_TP_GPIO13_AO (MTK_PIN_NO(60) | 6)
+
+#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define PINMUX_GPIO61__FUNC_MCU_M_PMIC_POC_I (MTK_PIN_NO(61) | 1)
+
+#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define PINMUX_GPIO62__FUNC_MCU_B_PMIC_POC_I (MTK_PIN_NO(62) | 1)
+
+#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define PINMUX_GPIO63__FUNC_MFG_PMIC_POC_I (MTK_PIN_NO(63) | 1)
+
+#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define PINMUX_GPIO64__FUNC_PRE_UVLO (MTK_PIN_NO(64) | 1)
+
+#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define PINMUX_GPIO65__FUNC_DPM2PMIC (MTK_PIN_NO(65) | 1)
+#define PINMUX_GPIO65__FUNC_SRCLKENA1 (MTK_PIN_NO(65) | 2)
+
+#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define PINMUX_GPIO66__FUNC_WATCHDOG (MTK_PIN_NO(66) | 1)
+
+#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define PINMUX_GPIO67__FUNC_SRCLKENA0 (MTK_PIN_NO(67) | 1)
+
+#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define PINMUX_GPIO68__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(68) | 1)
+
+#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define PINMUX_GPIO69__FUNC_RTC32K_CK (MTK_PIN_NO(69) | 1)
+
+#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define PINMUX_GPIO70__FUNC_CMFLASH0 (MTK_PIN_NO(70) | 1)
+
+#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+
+#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+
+#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+
+#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define PINMUX_GPIO74__FUNC_DCXO_FPM_LPM (MTK_PIN_NO(74) | 1)
+
+#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define PINMUX_GPIO75__FUNC_SPMI_M_SCL (MTK_PIN_NO(75) | 1)
+
+#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define PINMUX_GPIO76__FUNC_SPMI_M_SDA (MTK_PIN_NO(76) | 1)
+
+#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define PINMUX_GPIO77__FUNC_SPMI_P_SCL (MTK_PIN_NO(77) | 1)
+
+#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define PINMUX_GPIO78__FUNC_SPMI_P_SDA (MTK_PIN_NO(78) | 1)
+
+#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define PINMUX_GPIO79__FUNC_CMMCLK0 (MTK_PIN_NO(79) | 1)
+#define PINMUX_GPIO79__FUNC_MD_INT4 (MTK_PIN_NO(79) | 2)
+
+#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define PINMUX_GPIO80__FUNC_CMMCLK1 (MTK_PIN_NO(80) | 1)
+
+#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define PINMUX_GPIO81__FUNC_SCP_SPI0_CK (MTK_PIN_NO(81) | 1)
+#define PINMUX_GPIO81__FUNC_SPI6_B_CLK (MTK_PIN_NO(81) | 2)
+#define PINMUX_GPIO81__FUNC_PWM_VLP (MTK_PIN_NO(81) | 3)
+#define PINMUX_GPIO81__FUNC_I2SOUT5_BCK (MTK_PIN_NO(81) | 4)
+#define PINMUX_GPIO81__FUNC_TP_GPIO0_AO (MTK_PIN_NO(81) | 6)
+
+#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define PINMUX_GPIO82__FUNC_SCP_SPI0_CS (MTK_PIN_NO(82) | 1)
+#define PINMUX_GPIO82__FUNC_SPI6_B_CSB (MTK_PIN_NO(82) | 2)
+#define PINMUX_GPIO82__FUNC_I2SOUT5_LRCK (MTK_PIN_NO(82) | 4)
+#define PINMUX_GPIO82__FUNC_TP_GPIO1_AO (MTK_PIN_NO(82) | 6)
+
+#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define PINMUX_GPIO83__FUNC_SCP_SPI0_MO (MTK_PIN_NO(83) | 1)
+#define PINMUX_GPIO83__FUNC_SPI6_B_MO (MTK_PIN_NO(83) | 2)
+#define PINMUX_GPIO83__FUNC_I2SOUT5_DATA0 (MTK_PIN_NO(83) | 4)
+#define PINMUX_GPIO83__FUNC_TP_GPIO2_AO (MTK_PIN_NO(83) | 6)
+
+#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define PINMUX_GPIO84__FUNC_SCP_SPI0_MI (MTK_PIN_NO(84) | 1)
+#define PINMUX_GPIO84__FUNC_SPI6_B_MI (MTK_PIN_NO(84) | 2)
+#define PINMUX_GPIO84__FUNC_I2SOUT5_DATA1 (MTK_PIN_NO(84) | 4)
+#define PINMUX_GPIO84__FUNC_TP_GPIO3_AO (MTK_PIN_NO(84) | 6)
+
+#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define PINMUX_GPIO85__FUNC_SCP_SPI1_CK (MTK_PIN_NO(85) | 1)
+#define PINMUX_GPIO85__FUNC_SPI7_B_CLK (MTK_PIN_NO(85) | 2)
+#define PINMUX_GPIO85__FUNC_I2SIN5_DATA0 (MTK_PIN_NO(85) | 4)
+#define PINMUX_GPIO85__FUNC_PWM_VLP (MTK_PIN_NO(85) | 5)
+#define PINMUX_GPIO85__FUNC_TP_GPIO4_AO (MTK_PIN_NO(85) | 6)
+
+#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define PINMUX_GPIO86__FUNC_SCP_SPI1_CS (MTK_PIN_NO(86) | 1)
+#define PINMUX_GPIO86__FUNC_SPI7_B_CSB (MTK_PIN_NO(86) | 2)
+#define PINMUX_GPIO86__FUNC_I2SIN5_DATA1 (MTK_PIN_NO(86) | 4)
+#define PINMUX_GPIO86__FUNC_TP_GPIO5_AO (MTK_PIN_NO(86) | 6)
+
+#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define PINMUX_GPIO87__FUNC_SCP_SPI1_MO (MTK_PIN_NO(87) | 1)
+#define PINMUX_GPIO87__FUNC_SPI7_B_MO (MTK_PIN_NO(87) | 2)
+#define PINMUX_GPIO87__FUNC_I2SIN5_BCK (MTK_PIN_NO(87) | 4)
+#define PINMUX_GPIO87__FUNC_TP_GPIO6_AO (MTK_PIN_NO(87) | 6)
+
+#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define PINMUX_GPIO88__FUNC_SCP_SPI1_MI (MTK_PIN_NO(88) | 1)
+#define PINMUX_GPIO88__FUNC_SPI7_B_MI (MTK_PIN_NO(88) | 2)
+#define PINMUX_GPIO88__FUNC_I2SIN5_LRCK (MTK_PIN_NO(88) | 4)
+#define PINMUX_GPIO88__FUNC_TP_GPIO7_AO (MTK_PIN_NO(88) | 6)
+
+#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define PINMUX_GPIO89__FUNC_DSI_TE (MTK_PIN_NO(89) | 1)
+#define PINMUX_GPIO89__FUNC_DSI1_TE (MTK_PIN_NO(89) | 2)
+#define PINMUX_GPIO89__FUNC_DBG_MON_B30 (MTK_PIN_NO(89) | 7)
+
+#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define PINMUX_GPIO90__FUNC_LCM_RST (MTK_PIN_NO(90) | 1)
+#define PINMUX_GPIO90__FUNC_LCM1_RST (MTK_PIN_NO(90) | 2)
+#define PINMUX_GPIO90__FUNC_DBG_MON_B31 (MTK_PIN_NO(90) | 7)
+
+#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define PINMUX_GPIO91__FUNC_CMFLASH2 (MTK_PIN_NO(91) | 1)
+#define PINMUX_GPIO91__FUNC_SF_D0 (MTK_PIN_NO(91) | 2)
+#define PINMUX_GPIO91__FUNC_SRCLKENAI1 (MTK_PIN_NO(91) | 3)
+#define PINMUX_GPIO91__FUNC_KPCOL2 (MTK_PIN_NO(91) | 5)
+#define PINMUX_GPIO91__FUNC_TP_GPIO11_AO (MTK_PIN_NO(91) | 6)
+
+#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define PINMUX_GPIO92__FUNC_CMFLASH3 (MTK_PIN_NO(92) | 1)
+#define PINMUX_GPIO92__FUNC_SF_D1 (MTK_PIN_NO(92) | 2)
+#define PINMUX_GPIO92__FUNC_DISP_PWM1 (MTK_PIN_NO(92) | 4)
+#define PINMUX_GPIO92__FUNC_TP_GPIO12_AO (MTK_PIN_NO(92) | 6)
+
+#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define PINMUX_GPIO93__FUNC_CMFLASH1 (MTK_PIN_NO(93) | 1)
+#define PINMUX_GPIO93__FUNC_SF_D2 (MTK_PIN_NO(93) | 2)
+#define PINMUX_GPIO93__FUNC_SRCLKENAI0 (MTK_PIN_NO(93) | 3)
+#define PINMUX_GPIO93__FUNC_KPROW2 (MTK_PIN_NO(93) | 5)
+#define PINMUX_GPIO93__FUNC_TP_GPIO13_AO (MTK_PIN_NO(93) | 6)
+
+#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define PINMUX_GPIO94__FUNC_I2S_MCK1 (MTK_PIN_NO(94) | 1)
+#define PINMUX_GPIO94__FUNC_SF_D3 (MTK_PIN_NO(94) | 2)
+#define PINMUX_GPIO94__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(94) | 4)
+#define PINMUX_GPIO94__FUNC_CLKM0_A (MTK_PIN_NO(94) | 5)
+#define PINMUX_GPIO94__FUNC_TP_GPIO14_AO (MTK_PIN_NO(94) | 6)
+#define PINMUX_GPIO94__FUNC_DBG_MON_B18 (MTK_PIN_NO(94) | 7)
+
+#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define PINMUX_GPIO95__FUNC_I2SIN1_BCK (MTK_PIN_NO(95) | 1)
+#define PINMUX_GPIO95__FUNC_I2SIN4_BCK (MTK_PIN_NO(95) | 2)
+#define PINMUX_GPIO95__FUNC_SPI6_A_CLK (MTK_PIN_NO(95) | 3)
+#define PINMUX_GPIO95__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(95) | 4)
+#define PINMUX_GPIO95__FUNC_CLKM1_A (MTK_PIN_NO(95) | 5)
+#define PINMUX_GPIO95__FUNC_TP_GPIO15_AO (MTK_PIN_NO(95) | 6)
+#define PINMUX_GPIO95__FUNC_DBG_MON_B19 (MTK_PIN_NO(95) | 7)
+
+#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define PINMUX_GPIO96__FUNC_I2SIN1_LRCK (MTK_PIN_NO(96) | 1)
+#define PINMUX_GPIO96__FUNC_I2SIN4_LRCK (MTK_PIN_NO(96) | 2)
+#define PINMUX_GPIO96__FUNC_SPI6_A_CSB (MTK_PIN_NO(96) | 3)
+#define PINMUX_GPIO96__FUNC_MD32_2_GPIO0 (MTK_PIN_NO(96) | 4)
+#define PINMUX_GPIO96__FUNC_CLKM2_A (MTK_PIN_NO(96) | 5)
+#define PINMUX_GPIO96__FUNC_DBG_MON_B20 (MTK_PIN_NO(96) | 7)
+
+#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define PINMUX_GPIO97__FUNC_I2SIN1_DI_A (MTK_PIN_NO(97) | 1)
+#define PINMUX_GPIO97__FUNC_I2SIN4_DATA0 (MTK_PIN_NO(97) | 2)
+#define PINMUX_GPIO97__FUNC_SPI6_A_MO (MTK_PIN_NO(97) | 3)
+#define PINMUX_GPIO97__FUNC_MD32_3_GPIO0 (MTK_PIN_NO(97) | 4)
+#define PINMUX_GPIO97__FUNC_CLKM3_A (MTK_PIN_NO(97) | 5)
+#define PINMUX_GPIO97__FUNC_DBG_MON_B21 (MTK_PIN_NO(97) | 7)
+
+#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define PINMUX_GPIO98__FUNC_I2SOUT1_DO (MTK_PIN_NO(98) | 1)
+#define PINMUX_GPIO98__FUNC_I2SOUT4_DATA0 (MTK_PIN_NO(98) | 2)
+#define PINMUX_GPIO98__FUNC_SPI6_A_MI (MTK_PIN_NO(98) | 3)
+#define PINMUX_GPIO98__FUNC_DBG_MON_B22 (MTK_PIN_NO(98) | 7)
+
+#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define PINMUX_GPIO99__FUNC_SCL0 (MTK_PIN_NO(99) | 1)
+#define PINMUX_GPIO99__FUNC_LCM2_RST (MTK_PIN_NO(99) | 2)
+#define PINMUX_GPIO99__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(99) | 3)
+#define PINMUX_GPIO99__FUNC_SPU0_SCL (MTK_PIN_NO(99) | 4)
+#define PINMUX_GPIO99__FUNC_DBG_MON_B24 (MTK_PIN_NO(99) | 7)
+
+#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define PINMUX_GPIO100__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
+#define PINMUX_GPIO100__FUNC_DSI2_TE (MTK_PIN_NO(100) | 2)
+#define PINMUX_GPIO100__FUNC_SPU0_SDA (MTK_PIN_NO(100) | 4)
+#define PINMUX_GPIO100__FUNC_DBG_MON_B25 (MTK_PIN_NO(100) | 7)
+
+#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define PINMUX_GPIO101__FUNC_SCL10 (MTK_PIN_NO(101) | 1)
+#define PINMUX_GPIO101__FUNC_SF_CS (MTK_PIN_NO(101) | 2)
+#define PINMUX_GPIO101__FUNC_SCP_DMIC1_CLK (MTK_PIN_NO(101) | 3)
+#define PINMUX_GPIO101__FUNC_I2SIN5_DATA2 (MTK_PIN_NO(101) | 4)
+#define PINMUX_GPIO101__FUNC_SCP_SCL_OIS (MTK_PIN_NO(101) | 5)
+#define PINMUX_GPIO101__FUNC_TP_GPIO10_AO (MTK_PIN_NO(101) | 6)
+#define PINMUX_GPIO101__FUNC_DBG_MON_B28 (MTK_PIN_NO(101) | 7)
+
+#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define PINMUX_GPIO102__FUNC_SDA10 (MTK_PIN_NO(102) | 1)
+#define PINMUX_GPIO102__FUNC_SF_CK (MTK_PIN_NO(102) | 2)
+#define PINMUX_GPIO102__FUNC_SCP_DMIC1_DAT (MTK_PIN_NO(102) | 3)
+#define PINMUX_GPIO102__FUNC_I2SIN5_DATA3 (MTK_PIN_NO(102) | 4)
+#define PINMUX_GPIO102__FUNC_SCP_SDA_OIS (MTK_PIN_NO(102) | 5)
+#define PINMUX_GPIO102__FUNC_TP_GPIO11_AO (MTK_PIN_NO(102) | 6)
+#define PINMUX_GPIO102__FUNC_DBG_MON_B29 (MTK_PIN_NO(102) | 7)
+
+#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define PINMUX_GPIO103__FUNC_DISP_PWM (MTK_PIN_NO(103) | 1)
+#define PINMUX_GPIO103__FUNC_DSI1_TE (MTK_PIN_NO(103) | 2)
+#define PINMUX_GPIO103__FUNC_I2S_MCK0 (MTK_PIN_NO(103) | 5)
+#define PINMUX_GPIO103__FUNC_DBG_MON_B23 (MTK_PIN_NO(103) | 7)
+
+#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define PINMUX_GPIO104__FUNC_SCL6 (MTK_PIN_NO(104) | 1)
+#define PINMUX_GPIO104__FUNC_SPU1_SCL (MTK_PIN_NO(104) | 2)
+#define PINMUX_GPIO104__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(104) | 3)
+#define PINMUX_GPIO104__FUNC_USB_DRVVBUS_2P (MTK_PIN_NO(104) | 4)
+#define PINMUX_GPIO104__FUNC_I2S_MCK1 (MTK_PIN_NO(104) | 5)
+#define PINMUX_GPIO104__FUNC_IDDIG_2P (MTK_PIN_NO(104) | 6)
+#define PINMUX_GPIO104__FUNC_DBG_MON_B26 (MTK_PIN_NO(104) | 7)
+
+#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define PINMUX_GPIO105__FUNC_SDA6 (MTK_PIN_NO(105) | 1)
+#define PINMUX_GPIO105__FUNC_SPU1_SDA (MTK_PIN_NO(105) | 2)
+#define PINMUX_GPIO105__FUNC_DISP_PWM2 (MTK_PIN_NO(105) | 3)
+#define PINMUX_GPIO105__FUNC_VBUSVALID_2P (MTK_PIN_NO(105) | 4)
+#define PINMUX_GPIO105__FUNC_I2S_MCK2 (MTK_PIN_NO(105) | 5)
+#define PINMUX_GPIO105__FUNC_VBUSVALID_3P (MTK_PIN_NO(105) | 6)
+#define PINMUX_GPIO105__FUNC_DBG_MON_B27 (MTK_PIN_NO(105) | 7)
+
+#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define PINMUX_GPIO106__FUNC_SCP_SPI3_CK (MTK_PIN_NO(106) | 1)
+#define PINMUX_GPIO106__FUNC_SPI3_B_CLK (MTK_PIN_NO(106) | 2)
+#define PINMUX_GPIO106__FUNC_MD_UTXD0 (MTK_PIN_NO(106) | 3)
+#define PINMUX_GPIO106__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(106) | 4)
+#define PINMUX_GPIO106__FUNC_CONN_BG_GPS_MCU_UART0_TXD (MTK_PIN_NO(106) | 5)
+#define PINMUX_GPIO106__FUNC_TP_GPIO6_AO (MTK_PIN_NO(106) | 6)
+#define PINMUX_GPIO106__FUNC_DBG_MON_B0 (MTK_PIN_NO(106) | 7)
+
+#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define PINMUX_GPIO107__FUNC_SCP_SPI3_CS (MTK_PIN_NO(107) | 1)
+#define PINMUX_GPIO107__FUNC_SPI3_B_CSB (MTK_PIN_NO(107) | 2)
+#define PINMUX_GPIO107__FUNC_MD_URXD0 (MTK_PIN_NO(107) | 3)
+#define PINMUX_GPIO107__FUNC_TP_URXD1_VLP (MTK_PIN_NO(107) | 4)
+#define PINMUX_GPIO107__FUNC_CONN_BG_GPS_MCU_UART0_RXD (MTK_PIN_NO(107) | 5)
+#define PINMUX_GPIO107__FUNC_TP_GPIO7_AO (MTK_PIN_NO(107) | 6)
+#define PINMUX_GPIO107__FUNC_DBG_MON_B1 (MTK_PIN_NO(107) | 7)
+
+#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define PINMUX_GPIO108__FUNC_SCP_SPI3_MO (MTK_PIN_NO(108) | 1)
+#define PINMUX_GPIO108__FUNC_SPI3_B_MO (MTK_PIN_NO(108) | 2)
+#define PINMUX_GPIO108__FUNC_MD_UTXD1 (MTK_PIN_NO(108) | 3)
+#define PINMUX_GPIO108__FUNC_MD32PCM_UTXD_AO_VLP (MTK_PIN_NO(108) | 4)
+#define PINMUX_GPIO108__FUNC_CONN_BG_GPS_MCU_UART1_TXD (MTK_PIN_NO(108) | 5)
+#define PINMUX_GPIO108__FUNC_TP_GPIO8_AO (MTK_PIN_NO(108) | 6)
+#define PINMUX_GPIO108__FUNC_DBG_MON_B2 (MTK_PIN_NO(108) | 7)
+
+#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define PINMUX_GPIO109__FUNC_SCP_SPI3_MI (MTK_PIN_NO(109) | 1)
+#define PINMUX_GPIO109__FUNC_SPI3_B_MI (MTK_PIN_NO(109) | 2)
+#define PINMUX_GPIO109__FUNC_MD_URXD1 (MTK_PIN_NO(109) | 3)
+#define PINMUX_GPIO109__FUNC_MD32PCM_URXD_AO_VLP (MTK_PIN_NO(109) | 4)
+#define PINMUX_GPIO109__FUNC_CONN_BG_GPS_MCU_UART1_RXD (MTK_PIN_NO(109) | 5)
+#define PINMUX_GPIO109__FUNC_TP_GPIO9_AO (MTK_PIN_NO(109) | 6)
+#define PINMUX_GPIO109__FUNC_DBG_MON_B3 (MTK_PIN_NO(109) | 7)
+
+#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define PINMUX_GPIO110__FUNC_SPI1_CLK (MTK_PIN_NO(110) | 1)
+#define PINMUX_GPIO110__FUNC_PWM_0 (MTK_PIN_NO(110) | 2)
+#define PINMUX_GPIO110__FUNC_MD_UCTS0 (MTK_PIN_NO(110) | 3)
+#define PINMUX_GPIO110__FUNC_TP_UCTS1_VLP (MTK_PIN_NO(110) | 4)
+#define PINMUX_GPIO110__FUNC_SPU0_GPIO_O (MTK_PIN_NO(110) | 6)
+#define PINMUX_GPIO110__FUNC_DBG_MON_B4 (MTK_PIN_NO(110) | 7)
+
+#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define PINMUX_GPIO111__FUNC_SPI1_CSB (MTK_PIN_NO(111) | 1)
+#define PINMUX_GPIO111__FUNC_PWM_1 (MTK_PIN_NO(111) | 2)
+#define PINMUX_GPIO111__FUNC_MD_URTS0 (MTK_PIN_NO(111) | 3)
+#define PINMUX_GPIO111__FUNC_TP_URTS1_VLP (MTK_PIN_NO(111) | 4)
+#define PINMUX_GPIO111__FUNC_SPU0_GPIO_I (MTK_PIN_NO(111) | 6)
+#define PINMUX_GPIO111__FUNC_DBG_MON_B5 (MTK_PIN_NO(111) | 7)
+
+#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define PINMUX_GPIO112__FUNC_SPI1_MO (MTK_PIN_NO(112) | 1)
+#define PINMUX_GPIO112__FUNC_PWM_2 (MTK_PIN_NO(112) | 2)
+#define PINMUX_GPIO112__FUNC_MD_UCTS1 (MTK_PIN_NO(112) | 3)
+#define PINMUX_GPIO112__FUNC_SPU1_GPIO_O (MTK_PIN_NO(112) | 6)
+#define PINMUX_GPIO112__FUNC_DBG_MON_B6 (MTK_PIN_NO(112) | 7)
+
+#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define PINMUX_GPIO113__FUNC_SPI1_MI (MTK_PIN_NO(113) | 1)
+#define PINMUX_GPIO113__FUNC_PWM_3 (MTK_PIN_NO(113) | 2)
+#define PINMUX_GPIO113__FUNC_MD_URTS1 (MTK_PIN_NO(113) | 3)
+#define PINMUX_GPIO113__FUNC_SPU1_GPIO_I (MTK_PIN_NO(113) | 6)
+#define PINMUX_GPIO113__FUNC_DBG_MON_B7 (MTK_PIN_NO(113) | 7)
+
+#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define PINMUX_GPIO114__FUNC_SPI0_SPU_CLK (MTK_PIN_NO(114) | 1)
+#define PINMUX_GPIO114__FUNC_SPI4_A_CLK (MTK_PIN_NO(114) | 2)
+#define PINMUX_GPIO114__FUNC_CONN_BG_GPS_MCU_DBG_UART_TXD (MTK_PIN_NO(114) | 5)
+#define PINMUX_GPIO114__FUNC_DBG_MON_B8 (MTK_PIN_NO(114) | 7)
+
+#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define PINMUX_GPIO115__FUNC_SPI0_SPU_CSB (MTK_PIN_NO(115) | 1)
+#define PINMUX_GPIO115__FUNC_SPI4_A_CSB (MTK_PIN_NO(115) | 2)
+#define PINMUX_GPIO115__FUNC_DBG_MON_B9 (MTK_PIN_NO(115) | 7)
+
+#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define PINMUX_GPIO116__FUNC_SPI0_SPU_MO (MTK_PIN_NO(116) | 1)
+#define PINMUX_GPIO116__FUNC_SPI4_A_MO (MTK_PIN_NO(116) | 2)
+#define PINMUX_GPIO116__FUNC_LCM1_RST (MTK_PIN_NO(116) | 3)
+#define PINMUX_GPIO116__FUNC_DBG_MON_B10 (MTK_PIN_NO(116) | 7)
+
+#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define PINMUX_GPIO117__FUNC_SPI0_SPU_MI (MTK_PIN_NO(117) | 1)
+#define PINMUX_GPIO117__FUNC_SPI4_A_MI (MTK_PIN_NO(117) | 2)
+#define PINMUX_GPIO117__FUNC_DSI1_TE (MTK_PIN_NO(117) | 3)
+#define PINMUX_GPIO117__FUNC_DBG_MON_B11 (MTK_PIN_NO(117) | 7)
+
+#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define PINMUX_GPIO118__FUNC_SPI5_CLK (MTK_PIN_NO(118) | 1)
+#define PINMUX_GPIO118__FUNC_USB_DRVVBUS (MTK_PIN_NO(118) | 2)
+#define PINMUX_GPIO118__FUNC_DP_TX_HPD (MTK_PIN_NO(118) | 3)
+#define PINMUX_GPIO118__FUNC_AD_ILDO_DTEST0 (MTK_PIN_NO(118) | 4)
+
+#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define PINMUX_GPIO119__FUNC_SPI5_CSB (MTK_PIN_NO(119) | 1)
+#define PINMUX_GPIO119__FUNC_VBUSVALID (MTK_PIN_NO(119) | 2)
+#define PINMUX_GPIO119__FUNC_DP_OC_EN (MTK_PIN_NO(119) | 3)
+#define PINMUX_GPIO119__FUNC_AD_ILDO_DTEST1 (MTK_PIN_NO(119) | 4)
+
+#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define PINMUX_GPIO120__FUNC_SPI5_MO (MTK_PIN_NO(120) | 1)
+#define PINMUX_GPIO120__FUNC_LCM2_RST (MTK_PIN_NO(120) | 2)
+#define PINMUX_GPIO120__FUNC_DP_RAUX_SBU1 (MTK_PIN_NO(120) | 3)
+#define PINMUX_GPIO120__FUNC_AD_ILDO_DTEST2 (MTK_PIN_NO(120) | 4)
+#define PINMUX_GPIO120__FUNC_IDDIG_3P (MTK_PIN_NO(120) | 6)
+
+#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define PINMUX_GPIO121__FUNC_SPI5_MI (MTK_PIN_NO(121) | 1)
+#define PINMUX_GPIO121__FUNC_DSI2_TE (MTK_PIN_NO(121) | 2)
+#define PINMUX_GPIO121__FUNC_DP_RAUX_SBU2 (MTK_PIN_NO(121) | 3)
+#define PINMUX_GPIO121__FUNC_AD_ILDO_DTEST3 (MTK_PIN_NO(121) | 4)
+#define PINMUX_GPIO121__FUNC_USB_DRVVBUS_3P (MTK_PIN_NO(121) | 6)
+#define PINMUX_GPIO121__FUNC_DBG_MON_B17 (MTK_PIN_NO(121) | 7)
+
+#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define PINMUX_GPIO122__FUNC_AP_GOOD (MTK_PIN_NO(122) | 1)
+#define PINMUX_GPIO122__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(122) | 2)
+
+#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define PINMUX_GPIO123__FUNC_SCL3 (MTK_PIN_NO(123) | 1)
+#define PINMUX_GPIO123__FUNC_I2SIN2_LRCK (MTK_PIN_NO(123) | 5)
+#define PINMUX_GPIO123__FUNC_TP_UTXD_MD_VCORE (MTK_PIN_NO(123) | 6)
+
+#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define PINMUX_GPIO124__FUNC_SDA3 (MTK_PIN_NO(124) | 1)
+#define PINMUX_GPIO124__FUNC_TP_URXD_MD_VCORE (MTK_PIN_NO(124) | 6)
+
+#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define PINMUX_GPIO125__FUNC_MSDC1_CLK (MTK_PIN_NO(125) | 1)
+#define PINMUX_GPIO125__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(125) | 2)
+#define PINMUX_GPIO125__FUNC_HFRP_JTAG0_TCK (MTK_PIN_NO(125) | 3)
+#define PINMUX_GPIO125__FUNC_UDI_TCK (MTK_PIN_NO(125) | 4)
+#define PINMUX_GPIO125__FUNC_CONN_BGF_DSP_L1_JCK (MTK_PIN_NO(125) | 5)
+#define PINMUX_GPIO125__FUNC_SCP_JTAG_LITTLE_TCK_VLP (MTK_PIN_NO(125) | 6)
+#define PINMUX_GPIO125__FUNC_JTCK2_SEL1 (MTK_PIN_NO(125) | 7)
+
+#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define PINMUX_GPIO126__FUNC_MSDC1_CMD (MTK_PIN_NO(126) | 1)
+#define PINMUX_GPIO126__FUNC_HFRP_JTAG0_TMS (MTK_PIN_NO(126) | 3)
+#define PINMUX_GPIO126__FUNC_UDI_TMS (MTK_PIN_NO(126) | 4)
+#define PINMUX_GPIO126__FUNC_CONN_BGF_DSP_L1_JMS (MTK_PIN_NO(126) | 5)
+#define PINMUX_GPIO126__FUNC_SCP_JTAG_LITTLE_TMS_VLP (MTK_PIN_NO(126) | 6)
+#define PINMUX_GPIO126__FUNC_JTMS2_SEL1 (MTK_PIN_NO(126) | 7)
+
+#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define PINMUX_GPIO127__FUNC_MSDC1_DAT0 (MTK_PIN_NO(127) | 1)
+#define PINMUX_GPIO127__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(127) | 2)
+#define PINMUX_GPIO127__FUNC_HFRP_JTAG0_TDI (MTK_PIN_NO(127) | 3)
+#define PINMUX_GPIO127__FUNC_UDI_TDI_0 (MTK_PIN_NO(127) | 4)
+#define PINMUX_GPIO127__FUNC_CONN_BGF_DSP_L1_JDI (MTK_PIN_NO(127) | 5)
+#define PINMUX_GPIO127__FUNC_SCP_JTAG_LITTLE_TDI_VLP (MTK_PIN_NO(127) | 6)
+#define PINMUX_GPIO127__FUNC_JTDI2_SEL1 (MTK_PIN_NO(127) | 7)
+
+#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define PINMUX_GPIO128__FUNC_MSDC1_DAT1 (MTK_PIN_NO(128) | 1)
+#define PINMUX_GPIO128__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(128) | 2)
+#define PINMUX_GPIO128__FUNC_HFRP_JTAG0_TDO (MTK_PIN_NO(128) | 3)
+#define PINMUX_GPIO128__FUNC_UDI_TDO_0 (MTK_PIN_NO(128) | 4)
+#define PINMUX_GPIO128__FUNC_CONN_BGF_DSP_L1_JDO (MTK_PIN_NO(128) | 5)
+#define PINMUX_GPIO128__FUNC_SCP_JTAG_LITTLE_TDO_VLP (MTK_PIN_NO(128) | 6)
+#define PINMUX_GPIO128__FUNC_JTDO2_SEL1 (MTK_PIN_NO(128) | 7)
+
+#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define PINMUX_GPIO129__FUNC_MSDC1_DAT2 (MTK_PIN_NO(129) | 1)
+#define PINMUX_GPIO129__FUNC_DSI2_HSYNC (MTK_PIN_NO(129) | 2)
+#define PINMUX_GPIO129__FUNC_HFRP_JTAG0_TRSTN (MTK_PIN_NO(129) | 3)
+#define PINMUX_GPIO129__FUNC_UDI_NTRST (MTK_PIN_NO(129) | 4)
+#define PINMUX_GPIO129__FUNC_SCP_JTAG_LITTLE_TRSTN_VLP (MTK_PIN_NO(129) | 6)
+#define PINMUX_GPIO129__FUNC_JTRSTN2_SEL1 (MTK_PIN_NO(129) | 7)
+
+#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define PINMUX_GPIO130__FUNC_MSDC1_DAT3 (MTK_PIN_NO(130) | 1)
+#define PINMUX_GPIO130__FUNC_DSI3_HSYNC (MTK_PIN_NO(130) | 2)
+#define PINMUX_GPIO130__FUNC_CONN_BGF_DSP_L1_JINTP (MTK_PIN_NO(130) | 5)
+
+#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define PINMUX_GPIO131__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(131) | 1)
+#define PINMUX_GPIO131__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(131) | 2)
+#define PINMUX_GPIO131__FUNC_MCUPM_JTAG_TDI (MTK_PIN_NO(131) | 3)
+#define PINMUX_GPIO131__FUNC_CLKM0_A (MTK_PIN_NO(131) | 4)
+#define PINMUX_GPIO131__FUNC_CONN_BGF_DSP_L5_JDI (MTK_PIN_NO(131) | 5)
+#define PINMUX_GPIO131__FUNC_TSFDC_SCK (MTK_PIN_NO(131) | 6)
+#define PINMUX_GPIO131__FUNC_SCP_JTAG0_TDI_VCORE (MTK_PIN_NO(131) | 7)
+
+#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define PINMUX_GPIO132__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(132) | 1)
+#define PINMUX_GPIO132__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(132) | 2)
+#define PINMUX_GPIO132__FUNC_MCUPM_JTAG_TMS (MTK_PIN_NO(132) | 3)
+#define PINMUX_GPIO132__FUNC_CLKM1_B (MTK_PIN_NO(132) | 4)
+#define PINMUX_GPIO132__FUNC_CONN_BGF_DSP_L5_JMS (MTK_PIN_NO(132) | 5)
+#define PINMUX_GPIO132__FUNC_TSFDC_SDI (MTK_PIN_NO(132) | 6)
+#define PINMUX_GPIO132__FUNC_SCP_JTAG0_TMS_VCORE (MTK_PIN_NO(132) | 7)
+
+#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define PINMUX_GPIO133__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(133) | 1)
+#define PINMUX_GPIO133__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(133) | 2)
+#define PINMUX_GPIO133__FUNC_MCUPM_JTAG_TDO (MTK_PIN_NO(133) | 3)
+#define PINMUX_GPIO133__FUNC_CONN_BGF_DSP_L5_JDO (MTK_PIN_NO(133) | 5)
+#define PINMUX_GPIO133__FUNC_TSFDC_SCF (MTK_PIN_NO(133) | 6)
+#define PINMUX_GPIO133__FUNC_SCP_JTAG0_TDO_VCORE (MTK_PIN_NO(133) | 7)
+
+#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define PINMUX_GPIO134__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(134) | 1)
+#define PINMUX_GPIO134__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(134) | 2)
+#define PINMUX_GPIO134__FUNC_TSFDC_26M (MTK_PIN_NO(134) | 6)
+
+#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define PINMUX_GPIO135__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(135) | 1)
+#define PINMUX_GPIO135__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(135) | 2)
+#define PINMUX_GPIO135__FUNC_MCUPM_JTAG_TCK (MTK_PIN_NO(135) | 3)
+#define PINMUX_GPIO135__FUNC_CONN_BGF_DSP_L5_JCK (MTK_PIN_NO(135) | 5)
+#define PINMUX_GPIO135__FUNC_TSFDC_SDO (MTK_PIN_NO(135) | 6)
+#define PINMUX_GPIO135__FUNC_SCP_JTAG0_TCK_VCORE (MTK_PIN_NO(135) | 7)
+
+#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define PINMUX_GPIO136__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(136) | 1)
+#define PINMUX_GPIO136__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(136) | 2)
+#define PINMUX_GPIO136__FUNC_MCUPM_JTAG_TRSTN (MTK_PIN_NO(136) | 3)
+#define PINMUX_GPIO136__FUNC_CONN_BGF_DSP_L5_JINTP (MTK_PIN_NO(136) | 5)
+#define PINMUX_GPIO136__FUNC_TSFDC_FOUT (MTK_PIN_NO(136) | 6)
+#define PINMUX_GPIO136__FUNC_SCP_JTAG0_TRSTN_VCORE (MTK_PIN_NO(136) | 7)
+
+#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define PINMUX_GPIO137__FUNC_MIPI0_D_SCLK (MTK_PIN_NO(137) | 1)
+#define PINMUX_GPIO137__FUNC_BPI_BUS16 (MTK_PIN_NO(137) | 2)
+#define PINMUX_GPIO137__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(137) | 4)
+#define PINMUX_GPIO137__FUNC_SPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(137) | 6)
+#define PINMUX_GPIO137__FUNC_DBG_MON_A0 (MTK_PIN_NO(137) | 7)
+
+#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define PINMUX_GPIO138__FUNC_MIPI0_D_SDATA (MTK_PIN_NO(138) | 1)
+#define PINMUX_GPIO138__FUNC_BPI_BUS17 (MTK_PIN_NO(138) | 2)
+#define PINMUX_GPIO138__FUNC_PCM0_LRCK (MTK_PIN_NO(138) | 4)
+#define PINMUX_GPIO138__FUNC_SPM_JTAG_TCK_VCORE (MTK_PIN_NO(138) | 6)
+#define PINMUX_GPIO138__FUNC_DBG_MON_A1 (MTK_PIN_NO(138) | 7)
+
+#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define PINMUX_GPIO139__FUNC_MIPI1_D_SCLK (MTK_PIN_NO(139) | 1)
+#define PINMUX_GPIO139__FUNC_BPI_BUS18 (MTK_PIN_NO(139) | 2)
+#define PINMUX_GPIO139__FUNC_MD_GPS_BLANK (MTK_PIN_NO(139) | 4)
+#define PINMUX_GPIO139__FUNC_SPM_JTAG_TMS_VCORE (MTK_PIN_NO(139) | 6)
+#define PINMUX_GPIO139__FUNC_DBG_MON_A2 (MTK_PIN_NO(139) | 7)
+
+#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define PINMUX_GPIO140__FUNC_MIPI1_D_SDATA (MTK_PIN_NO(140) | 1)
+#define PINMUX_GPIO140__FUNC_BPI_BUS19 (MTK_PIN_NO(140) | 2)
+#define PINMUX_GPIO140__FUNC_MD_URXD1_CONN (MTK_PIN_NO(140) | 4)
+#define PINMUX_GPIO140__FUNC_SPM_JTAG_TDO_VCORE (MTK_PIN_NO(140) | 6)
+#define PINMUX_GPIO140__FUNC_DBG_MON_A3 (MTK_PIN_NO(140) | 7)
+
+#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define PINMUX_GPIO141__FUNC_MIPI2_D_SCLK (MTK_PIN_NO(141) | 1)
+#define PINMUX_GPIO141__FUNC_BPI_BUS20 (MTK_PIN_NO(141) | 2)
+#define PINMUX_GPIO141__FUNC_MD_UTXD1_CONN (MTK_PIN_NO(141) | 4)
+#define PINMUX_GPIO141__FUNC_SPM_JTAG_TDI_VCORE (MTK_PIN_NO(141) | 6)
+#define PINMUX_GPIO141__FUNC_DBG_MON_A4 (MTK_PIN_NO(141) | 7)
+
+#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define PINMUX_GPIO142__FUNC_MIPI2_D_SDATA (MTK_PIN_NO(142) | 1)
+#define PINMUX_GPIO142__FUNC_BPI_BUS21 (MTK_PIN_NO(142) | 2)
+#define PINMUX_GPIO142__FUNC_SSPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(142) | 6)
+#define PINMUX_GPIO142__FUNC_DBG_MON_A5 (MTK_PIN_NO(142) | 7)
+
+#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define PINMUX_GPIO143__FUNC_MIPI3_D_SCLK (MTK_PIN_NO(143) | 1)
+#define PINMUX_GPIO143__FUNC_BPI_BUS22 (MTK_PIN_NO(143) | 2)
+#define PINMUX_GPIO143__FUNC_TP_UTXD_GNSS_VLP (MTK_PIN_NO(143) | 4)
+#define PINMUX_GPIO143__FUNC_MD_UTXD1_CONN (MTK_PIN_NO(143) | 5)
+#define PINMUX_GPIO143__FUNC_SSPM_JTAG_TCK_VCORE (MTK_PIN_NO(143) | 6)
+
+#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define PINMUX_GPIO144__FUNC_MIPI3_D_SDATA (MTK_PIN_NO(144) | 1)
+#define PINMUX_GPIO144__FUNC_BPI_BUS23 (MTK_PIN_NO(144) | 2)
+#define PINMUX_GPIO144__FUNC_TP_URXD_GNSS_VLP (MTK_PIN_NO(144) | 4)
+#define PINMUX_GPIO144__FUNC_MD_URXD1_CONN (MTK_PIN_NO(144) | 5)
+#define PINMUX_GPIO144__FUNC_SSPM_JTAG_TMS_VCORE (MTK_PIN_NO(144) | 6)
+
+#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define PINMUX_GPIO145__FUNC_BPI_BUS0 (MTK_PIN_NO(145) | 1)
+#define PINMUX_GPIO145__FUNC_PCIE_WAKEN_1P (MTK_PIN_NO(145) | 4)
+#define PINMUX_GPIO145__FUNC_SSPM_JTAG_TDO_VCORE (MTK_PIN_NO(145) | 6)
+#define PINMUX_GPIO145__FUNC_DBG_MON_A10 (MTK_PIN_NO(145) | 7)
+
+#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define PINMUX_GPIO146__FUNC_BPI_BUS1 (MTK_PIN_NO(146) | 1)
+#define PINMUX_GPIO146__FUNC_PCIE_PERSTN_1P (MTK_PIN_NO(146) | 4)
+#define PINMUX_GPIO146__FUNC_SSPM_JTAG_TDI_VCORE (MTK_PIN_NO(146) | 6)
+#define PINMUX_GPIO146__FUNC_DBG_MON_A11 (MTK_PIN_NO(146) | 7)
+
+#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define PINMUX_GPIO147__FUNC_BPI_BUS2 (MTK_PIN_NO(147) | 1)
+#define PINMUX_GPIO147__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(147) | 2)
+#define PINMUX_GPIO147__FUNC_PCIE_CLKREQN_1P (MTK_PIN_NO(147) | 4)
+#define PINMUX_GPIO147__FUNC_SCP_JTAG_LITTLE_TRSTN_VCORE (MTK_PIN_NO(147) | 6)
+#define PINMUX_GPIO147__FUNC_DBG_MON_A12 (MTK_PIN_NO(147) | 7)
+
+#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define PINMUX_GPIO148__FUNC_BPI_BUS3 (MTK_PIN_NO(148) | 1)
+#define PINMUX_GPIO148__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(148) | 2)
+#define PINMUX_GPIO148__FUNC_TP_UTXD_MD_VLP (MTK_PIN_NO(148) | 4)
+#define PINMUX_GPIO148__FUNC_TP_GPIO0_AO (MTK_PIN_NO(148) | 5)
+#define PINMUX_GPIO148__FUNC_SCP_JTAG_LITTLE_TCK_VCORE (MTK_PIN_NO(148) | 6)
+#define PINMUX_GPIO148__FUNC_DBG_MON_A13 (MTK_PIN_NO(148) | 7)
+
+#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define PINMUX_GPIO149__FUNC_BPI_BUS4 (MTK_PIN_NO(149) | 1)
+#define PINMUX_GPIO149__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(149) | 2)
+#define PINMUX_GPIO149__FUNC_TP_URXD_MD_VLP (MTK_PIN_NO(149) | 4)
+#define PINMUX_GPIO149__FUNC_TP_GPIO1_AO (MTK_PIN_NO(149) | 5)
+#define PINMUX_GPIO149__FUNC_SCP_JTAG_LITTLE_TMS_VCORE (MTK_PIN_NO(149) | 6)
+#define PINMUX_GPIO149__FUNC_DBG_MON_A14 (MTK_PIN_NO(149) | 7)
+
+#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define PINMUX_GPIO150__FUNC_BPI_BUS5 (MTK_PIN_NO(150) | 1)
+#define PINMUX_GPIO150__FUNC_GPS_PPS0 (MTK_PIN_NO(150) | 2)
+#define PINMUX_GPIO150__FUNC_TP_GPIO2_AO (MTK_PIN_NO(150) | 5)
+#define PINMUX_GPIO150__FUNC_SCP_JTAG_LITTLE_TDO_VCORE (MTK_PIN_NO(150) | 6)
+#define PINMUX_GPIO150__FUNC_DBG_MON_A15 (MTK_PIN_NO(150) | 7)
+
+#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define PINMUX_GPIO151__FUNC_BPI_BUS6 (MTK_PIN_NO(151) | 1)
+#define PINMUX_GPIO151__FUNC_GPS_PPS1 (MTK_PIN_NO(151) | 2)
+#define PINMUX_GPIO151__FUNC_TP_GPIO3_AO (MTK_PIN_NO(151) | 5)
+#define PINMUX_GPIO151__FUNC_SCP_JTAG_LITTLE_TDI_VCORE (MTK_PIN_NO(151) | 6)
+
+#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define PINMUX_GPIO152__FUNC_BPI_BUS7 (MTK_PIN_NO(152) | 1)
+#define PINMUX_GPIO152__FUNC_EDP_TX_HPD (MTK_PIN_NO(152) | 2)
+#define PINMUX_GPIO152__FUNC_AGPS_SYNC (MTK_PIN_NO(152) | 5)
+#define PINMUX_GPIO152__FUNC_SSPM_UTXD_AO_VCORE (MTK_PIN_NO(152) | 6)
+
+#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define PINMUX_GPIO153__FUNC_MD_UCNT_A_TGL (MTK_PIN_NO(153) | 1)
+#define PINMUX_GPIO153__FUNC_TP_URTS1_VCORE (MTK_PIN_NO(153) | 6)
+#define PINMUX_GPIO153__FUNC_DBG_MON_A8 (MTK_PIN_NO(153) | 7)
+
+#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define PINMUX_GPIO154__FUNC_DIGRF_IRQ (MTK_PIN_NO(154) | 1)
+#define PINMUX_GPIO154__FUNC_TP_UCTS1_VCORE (MTK_PIN_NO(154) | 6)
+#define PINMUX_GPIO154__FUNC_DBG_MON_A9 (MTK_PIN_NO(154) | 7)
+
+#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define PINMUX_GPIO155__FUNC_MIPI_M_SCLK (MTK_PIN_NO(155) | 1)
+#define PINMUX_GPIO155__FUNC_UCTS2 (MTK_PIN_NO(155) | 4)
+#define PINMUX_GPIO155__FUNC_TP_UTXD_CONSYS_VCORE (MTK_PIN_NO(155) | 6)
+#define PINMUX_GPIO155__FUNC_DBG_MON_A6 (MTK_PIN_NO(155) | 7)
+
+#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define PINMUX_GPIO156__FUNC_MIPI_M_SDATA (MTK_PIN_NO(156) | 1)
+#define PINMUX_GPIO156__FUNC_URTS2 (MTK_PIN_NO(156) | 4)
+#define PINMUX_GPIO156__FUNC_TP_URXD_CONSYS_VCORE (MTK_PIN_NO(156) | 6)
+#define PINMUX_GPIO156__FUNC_DBG_MON_A7 (MTK_PIN_NO(156) | 7)
+
+#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define PINMUX_GPIO157__FUNC_BPI_BUS8 (MTK_PIN_NO(157) | 1)
+#define PINMUX_GPIO157__FUNC_UTXD2 (MTK_PIN_NO(157) | 4)
+#define PINMUX_GPIO157__FUNC_CLKM0_A (MTK_PIN_NO(157) | 5)
+#define PINMUX_GPIO157__FUNC_SSPM_URXD_AO_VCORE (MTK_PIN_NO(157) | 6)
+#define PINMUX_GPIO157__FUNC_DBG_MON_A16 (MTK_PIN_NO(157) | 7)
+
+#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define PINMUX_GPIO158__FUNC_BPI_BUS9 (MTK_PIN_NO(158) | 1)
+#define PINMUX_GPIO158__FUNC_URXD2 (MTK_PIN_NO(158) | 4)
+#define PINMUX_GPIO158__FUNC_CLKM1_A (MTK_PIN_NO(158) | 5)
+#define PINMUX_GPIO158__FUNC_TP_UTXD1_VCORE (MTK_PIN_NO(158) | 6)
+
+#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define PINMUX_GPIO159__FUNC_BPI_BUS10 (MTK_PIN_NO(159) | 1)
+#define PINMUX_GPIO159__FUNC_MD_INT0 (MTK_PIN_NO(159) | 2)
+#define PINMUX_GPIO159__FUNC_SRCLKENAI1 (MTK_PIN_NO(159) | 3)
+#define PINMUX_GPIO159__FUNC_CLKM2_A (MTK_PIN_NO(159) | 5)
+#define PINMUX_GPIO159__FUNC_TP_URXD1_VCORE (MTK_PIN_NO(159) | 6)
+
+#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define PINMUX_GPIO160__FUNC_UTXD0 (MTK_PIN_NO(160) | 1)
+#define PINMUX_GPIO160__FUNC_MD_UTXD1 (MTK_PIN_NO(160) | 2)
+#define PINMUX_GPIO160__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(160) | 5)
+#define PINMUX_GPIO160__FUNC_CONN_BG_GPS_MCU_DBG_UART_TXD (MTK_PIN_NO(160) | 6)
+
+#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define PINMUX_GPIO161__FUNC_URXD0 (MTK_PIN_NO(161) | 1)
+#define PINMUX_GPIO161__FUNC_MD_URXD1 (MTK_PIN_NO(161) | 2)
+#define PINMUX_GPIO161__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(161) | 5)
+
+#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define PINMUX_GPIO162__FUNC_UTXD1 (MTK_PIN_NO(162) | 1)
+#define PINMUX_GPIO162__FUNC_MD_UTXD0 (MTK_PIN_NO(162) | 2)
+#define PINMUX_GPIO162__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(162) | 3)
+#define PINMUX_GPIO162__FUNC_ADSP_UTXD0 (MTK_PIN_NO(162) | 4)
+#define PINMUX_GPIO162__FUNC_SSPM_UTXD_AO_VLP (MTK_PIN_NO(162) | 5)
+#define PINMUX_GPIO162__FUNC_HFRP_UTXD1 (MTK_PIN_NO(162) | 6)
+
+#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define PINMUX_GPIO163__FUNC_URXD1 (MTK_PIN_NO(163) | 1)
+#define PINMUX_GPIO163__FUNC_MD_URXD0 (MTK_PIN_NO(163) | 2)
+#define PINMUX_GPIO163__FUNC_TP_URXD1_VLP (MTK_PIN_NO(163) | 3)
+#define PINMUX_GPIO163__FUNC_ADSP_URXD0 (MTK_PIN_NO(163) | 4)
+#define PINMUX_GPIO163__FUNC_SSPM_URXD_AO_VLP (MTK_PIN_NO(163) | 5)
+#define PINMUX_GPIO163__FUNC_HFRP_URXD1 (MTK_PIN_NO(163) | 6)
+
+#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define PINMUX_GPIO164__FUNC_SCP_SCL0 (MTK_PIN_NO(164) | 1)
+#define PINMUX_GPIO164__FUNC_TP_GPIO0_AO (MTK_PIN_NO(164) | 6)
+#define PINMUX_GPIO164__FUNC_DBG_MON_A22 (MTK_PIN_NO(164) | 7)
+
+#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define PINMUX_GPIO165__FUNC_SCP_SDA0 (MTK_PIN_NO(165) | 1)
+#define PINMUX_GPIO165__FUNC_TP_GPIO1_AO (MTK_PIN_NO(165) | 6)
+#define PINMUX_GPIO165__FUNC_DBG_MON_A23 (MTK_PIN_NO(165) | 7)
+
+#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define PINMUX_GPIO166__FUNC_SCP_SCL2 (MTK_PIN_NO(166) | 1)
+#define PINMUX_GPIO166__FUNC_TP_GPIO2_AO (MTK_PIN_NO(166) | 6)
+#define PINMUX_GPIO166__FUNC_DBG_MON_A24 (MTK_PIN_NO(166) | 7)
+
+#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define PINMUX_GPIO167__FUNC_SCP_SDA2 (MTK_PIN_NO(167) | 1)
+#define PINMUX_GPIO167__FUNC_TP_GPIO3_AO (MTK_PIN_NO(167) | 6)
+#define PINMUX_GPIO167__FUNC_DBG_MON_A25 (MTK_PIN_NO(167) | 7)
+
+#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define PINMUX_GPIO168__FUNC_SCP_SPI2_CK (MTK_PIN_NO(168) | 1)
+#define PINMUX_GPIO168__FUNC_SPI2_B_CLK (MTK_PIN_NO(168) | 2)
+#define PINMUX_GPIO168__FUNC_PWM_VLP (MTK_PIN_NO(168) | 3)
+#define PINMUX_GPIO168__FUNC_SCP_SCL2 (MTK_PIN_NO(168) | 4)
+#define PINMUX_GPIO168__FUNC_DBG_MON_A26 (MTK_PIN_NO(168) | 7)
+
+#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define PINMUX_GPIO169__FUNC_SCP_SPI2_CS (MTK_PIN_NO(169) | 1)
+#define PINMUX_GPIO169__FUNC_SPI2_B_CSB (MTK_PIN_NO(169) | 2)
+#define PINMUX_GPIO169__FUNC_DBG_MON_A27 (MTK_PIN_NO(169) | 7)
+
+#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define PINMUX_GPIO170__FUNC_SCP_SPI2_MO (MTK_PIN_NO(170) | 1)
+#define PINMUX_GPIO170__FUNC_SPI2_B_MO (MTK_PIN_NO(170) | 2)
+#define PINMUX_GPIO170__FUNC_SCP_SDA2 (MTK_PIN_NO(170) | 4)
+#define PINMUX_GPIO170__FUNC_DBG_MON_A28 (MTK_PIN_NO(170) | 7)
+
+#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define PINMUX_GPIO171__FUNC_SCP_SPI2_MI (MTK_PIN_NO(171) | 1)
+#define PINMUX_GPIO171__FUNC_SPI2_B_MI (MTK_PIN_NO(171) | 2)
+#define PINMUX_GPIO171__FUNC_DBG_MON_A29 (MTK_PIN_NO(171) | 7)
+
+#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define PINMUX_GPIO172__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(172) | 1)
+
+#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define PINMUX_GPIO173__FUNC_CMFLASH3 (MTK_PIN_NO(173) | 1)
+#define PINMUX_GPIO173__FUNC_PWM_3 (MTK_PIN_NO(173) | 2)
+#define PINMUX_GPIO173__FUNC_MD_GPS_L5_BLANK (MTK_PIN_NO(173) | 3)
+#define PINMUX_GPIO173__FUNC_CLKM1_A (MTK_PIN_NO(173) | 4)
+#define PINMUX_GPIO173__FUNC_DBG_MON_A31 (MTK_PIN_NO(173) | 7)
+
+#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define PINMUX_GPIO174__FUNC_CMFLASH0 (MTK_PIN_NO(174) | 1)
+#define PINMUX_GPIO174__FUNC_PWM_0 (MTK_PIN_NO(174) | 2)
+#define PINMUX_GPIO174__FUNC_VBUSVALID_1P (MTK_PIN_NO(174) | 3)
+#define PINMUX_GPIO174__FUNC_MD32_2_RXD (MTK_PIN_NO(174) | 4)
+#define PINMUX_GPIO174__FUNC_DISP_PWM3 (MTK_PIN_NO(174) | 5)
+
+#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define PINMUX_GPIO175__FUNC_CMFLASH1 (MTK_PIN_NO(175) | 1)
+#define PINMUX_GPIO175__FUNC_PWM_1 (MTK_PIN_NO(175) | 2)
+#define PINMUX_GPIO175__FUNC_EDP_TX_HPD (MTK_PIN_NO(175) | 3)
+#define PINMUX_GPIO175__FUNC_MD32_2_TXD (MTK_PIN_NO(175) | 4)
+#define PINMUX_GPIO175__FUNC_DISP_PWM4 (MTK_PIN_NO(175) | 5)
+
+#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define PINMUX_GPIO176__FUNC_SCL5 (MTK_PIN_NO(176) | 1)
+#define PINMUX_GPIO176__FUNC_LCM3_RST (MTK_PIN_NO(176) | 2)
+#define PINMUX_GPIO176__FUNC_MD_URXD1_CONN (MTK_PIN_NO(176) | 4)
+#define PINMUX_GPIO176__FUNC_TP_UTXD_GNSS_VCORE (MTK_PIN_NO(176) | 6)
+
+#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define PINMUX_GPIO177__FUNC_SDA5 (MTK_PIN_NO(177) | 1)
+#define PINMUX_GPIO177__FUNC_DSI3_TE (MTK_PIN_NO(177) | 2)
+#define PINMUX_GPIO177__FUNC_MD_UTXD1_CONN (MTK_PIN_NO(177) | 4)
+#define PINMUX_GPIO177__FUNC_TP_URXD_GNSS_VCORE (MTK_PIN_NO(177) | 6)
+
+#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define PINMUX_GPIO178__FUNC_DMIC_CLK (MTK_PIN_NO(178) | 1)
+#define PINMUX_GPIO178__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(178) | 2)
+#define PINMUX_GPIO178__FUNC_SRCLKENAI0 (MTK_PIN_NO(178) | 3)
+#define PINMUX_GPIO178__FUNC_CLKM2_B (MTK_PIN_NO(178) | 4)
+#define PINMUX_GPIO178__FUNC_TP_GPIO7_AO (MTK_PIN_NO(178) | 5)
+#define PINMUX_GPIO178__FUNC_SPU1_UTX (MTK_PIN_NO(178) | 6)
+#define PINMUX_GPIO178__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(178) | 7)
+
+#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define PINMUX_GPIO179__FUNC_DMIC_DAT (MTK_PIN_NO(179) | 1)
+#define PINMUX_GPIO179__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(179) | 2)
+#define PINMUX_GPIO179__FUNC_SRCLKENAI1 (MTK_PIN_NO(179) | 3)
+#define PINMUX_GPIO179__FUNC_CLKM3_B (MTK_PIN_NO(179) | 4)
+#define PINMUX_GPIO179__FUNC_TP_GPIO8_AO (MTK_PIN_NO(179) | 5)
+#define PINMUX_GPIO179__FUNC_SPU1_URX (MTK_PIN_NO(179) | 6)
+#define PINMUX_GPIO179__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(179) | 7)
+
+#define PINMUX_GPIO180__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define PINMUX_GPIO180__FUNC_IDDIG_1P (MTK_PIN_NO(180) | 1)
+#define PINMUX_GPIO180__FUNC_CMVREF0 (MTK_PIN_NO(180) | 2)
+#define PINMUX_GPIO180__FUNC_GPS_PPS1 (MTK_PIN_NO(180) | 3)
+#define PINMUX_GPIO180__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(180) | 4)
+#define PINMUX_GPIO180__FUNC_DISP_PWM1 (MTK_PIN_NO(180) | 5)
+
+#define PINMUX_GPIO181__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define PINMUX_GPIO181__FUNC_USB_DRVVBUS_1P (MTK_PIN_NO(181) | 1)
+#define PINMUX_GPIO181__FUNC_CMVREF1 (MTK_PIN_NO(181) | 2)
+#define PINMUX_GPIO181__FUNC_MFG_EB_JTAG_TRSTN (MTK_PIN_NO(181) | 3)
+#define PINMUX_GPIO181__FUNC_ADSP_JTAG1_TRSTN (MTK_PIN_NO(181) | 4)
+#define PINMUX_GPIO181__FUNC_HFRP_JTAG1_TRSTN (MTK_PIN_NO(181) | 5)
+#define PINMUX_GPIO181__FUNC_SPU1_NTRST (MTK_PIN_NO(181) | 6)
+#define PINMUX_GPIO181__FUNC_CONN_BG_GPS_MCU_TRST_B (MTK_PIN_NO(181) | 7)
+
+#define PINMUX_GPIO182__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define PINMUX_GPIO182__FUNC_SCL11 (MTK_PIN_NO(182) | 1)
+#define PINMUX_GPIO182__FUNC_CMVREF2 (MTK_PIN_NO(182) | 2)
+#define PINMUX_GPIO182__FUNC_MFG_EB_JTAG_TCK (MTK_PIN_NO(182) | 3)
+#define PINMUX_GPIO182__FUNC_ADSP_JTAG1_TCK (MTK_PIN_NO(182) | 4)
+#define PINMUX_GPIO182__FUNC_HFRP_JTAG1_TCK (MTK_PIN_NO(182) | 5)
+#define PINMUX_GPIO182__FUNC_SPU1_TCK (MTK_PIN_NO(182) | 6)
+#define PINMUX_GPIO182__FUNC_CONN_BG_GPS_MCU_TCK (MTK_PIN_NO(182) | 7)
+
+#define PINMUX_GPIO183__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define PINMUX_GPIO183__FUNC_SDA11 (MTK_PIN_NO(183) | 1)
+#define PINMUX_GPIO183__FUNC_CMVREF3 (MTK_PIN_NO(183) | 2)
+#define PINMUX_GPIO183__FUNC_MFG_EB_JTAG_TMS (MTK_PIN_NO(183) | 3)
+#define PINMUX_GPIO183__FUNC_ADSP_JTAG1_TMS (MTK_PIN_NO(183) | 4)
+#define PINMUX_GPIO183__FUNC_HFRP_JTAG1_TMS (MTK_PIN_NO(183) | 5)
+#define PINMUX_GPIO183__FUNC_SPU1_TMS (MTK_PIN_NO(183) | 6)
+#define PINMUX_GPIO183__FUNC_CONN_BG_GPS_MCU_TMS (MTK_PIN_NO(183) | 7)
+
+#define PINMUX_GPIO184__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define PINMUX_GPIO184__FUNC_SCL12 (MTK_PIN_NO(184) | 1)
+#define PINMUX_GPIO184__FUNC_CMVREF4 (MTK_PIN_NO(184) | 2)
+#define PINMUX_GPIO184__FUNC_MFG_EB_JTAG_TDO (MTK_PIN_NO(184) | 3)
+#define PINMUX_GPIO184__FUNC_ADSP_JTAG1_TDO (MTK_PIN_NO(184) | 4)
+#define PINMUX_GPIO184__FUNC_HFRP_JTAG1_TDO (MTK_PIN_NO(184) | 5)
+#define PINMUX_GPIO184__FUNC_SPU1_TDO (MTK_PIN_NO(184) | 6)
+#define PINMUX_GPIO184__FUNC_CONN_BG_GPS_MCU_TDO (MTK_PIN_NO(184) | 7)
+
+#define PINMUX_GPIO185__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define PINMUX_GPIO185__FUNC_SDA12 (MTK_PIN_NO(185) | 1)
+#define PINMUX_GPIO185__FUNC_CMVREF5 (MTK_PIN_NO(185) | 2)
+#define PINMUX_GPIO185__FUNC_MFG_EB_JTAG_TDI (MTK_PIN_NO(185) | 3)
+#define PINMUX_GPIO185__FUNC_ADSP_JTAG1_TDI (MTK_PIN_NO(185) | 4)
+#define PINMUX_GPIO185__FUNC_HFRP_JTAG1_TDI (MTK_PIN_NO(185) | 5)
+#define PINMUX_GPIO185__FUNC_SPU1_TDI (MTK_PIN_NO(185) | 6)
+#define PINMUX_GPIO185__FUNC_CONN_BG_GPS_MCU_TDI (MTK_PIN_NO(185) | 7)
+
+#define PINMUX_GPIO186__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define PINMUX_GPIO186__FUNC_MD_GPS_L1_BLANK (MTK_PIN_NO(186) | 1)
+#define PINMUX_GPIO186__FUNC_PMSR_SMAP (MTK_PIN_NO(186) | 2)
+#define PINMUX_GPIO186__FUNC_TP_GPIO2_AO (MTK_PIN_NO(186) | 3)
+
+#define PINMUX_GPIO187__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define PINMUX_GPIO187__FUNC_MD_GPS_L5_BLANK (MTK_PIN_NO(187) | 1)
+#define PINMUX_GPIO187__FUNC_TP_GPIO4_AO (MTK_PIN_NO(187) | 3)
+
+#define PINMUX_GPIO188__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define PINMUX_GPIO188__FUNC_SCL2 (MTK_PIN_NO(188) | 1)
+#define PINMUX_GPIO188__FUNC_SCP_SCL8 (MTK_PIN_NO(188) | 2)
+
+#define PINMUX_GPIO189__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define PINMUX_GPIO189__FUNC_SDA2 (MTK_PIN_NO(189) | 1)
+#define PINMUX_GPIO189__FUNC_SCP_SDA8 (MTK_PIN_NO(189) | 2)
+
+#define PINMUX_GPIO190__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define PINMUX_GPIO190__FUNC_SCL4 (MTK_PIN_NO(190) | 1)
+#define PINMUX_GPIO190__FUNC_SCP_SCL9 (MTK_PIN_NO(190) | 2)
+#define PINMUX_GPIO190__FUNC_UDI_TDI_6 (MTK_PIN_NO(190) | 6)
+
+#define PINMUX_GPIO191__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define PINMUX_GPIO191__FUNC_SDA4 (MTK_PIN_NO(191) | 1)
+#define PINMUX_GPIO191__FUNC_SCP_SDA9 (MTK_PIN_NO(191) | 2)
+#define PINMUX_GPIO191__FUNC_UDI_TDI_7 (MTK_PIN_NO(191) | 6)
+
+#define PINMUX_GPIO192__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define PINMUX_GPIO192__FUNC_CMMCLK2 (MTK_PIN_NO(192) | 1)
+#define PINMUX_GPIO192__FUNC_MD32_3_RXD (MTK_PIN_NO(192) | 4)
+
+#define PINMUX_GPIO193__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define PINMUX_GPIO193__FUNC_CLKM0_B (MTK_PIN_NO(193) | 3)
+#define PINMUX_GPIO193__FUNC_MD32_3_TXD (MTK_PIN_NO(193) | 4)
+#define PINMUX_GPIO193__FUNC_UDI_TDO_7 (MTK_PIN_NO(193) | 6)
+
+#define PINMUX_GPIO194__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define PINMUX_GPIO194__FUNC_SCL7 (MTK_PIN_NO(194) | 1)
+#define PINMUX_GPIO194__FUNC_MD32_3_GPIO0 (MTK_PIN_NO(194) | 2)
+#define PINMUX_GPIO194__FUNC_CLKM2_B (MTK_PIN_NO(194) | 3)
+#define PINMUX_GPIO194__FUNC_UDI_TDI_2 (MTK_PIN_NO(194) | 6)
+
+#define PINMUX_GPIO195__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define PINMUX_GPIO195__FUNC_SDA7 (MTK_PIN_NO(195) | 1)
+#define PINMUX_GPIO195__FUNC_CLKM3_B (MTK_PIN_NO(195) | 3)
+#define PINMUX_GPIO195__FUNC_UDI_TDI_3 (MTK_PIN_NO(195) | 6)
+
+#define PINMUX_GPIO196__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define PINMUX_GPIO196__FUNC_CMMCLK3 (MTK_PIN_NO(196) | 1)
+
+#define PINMUX_GPIO197__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define PINMUX_GPIO197__FUNC_CLKM1_B (MTK_PIN_NO(197) | 3)
+#define PINMUX_GPIO197__FUNC_UDI_TDI_1 (MTK_PIN_NO(197) | 6)
+
+#define PINMUX_GPIO198__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define PINMUX_GPIO198__FUNC_SCL8 (MTK_PIN_NO(198) | 1)
+#define PINMUX_GPIO198__FUNC_UDI_TDI_4 (MTK_PIN_NO(198) | 6)
+
+#define PINMUX_GPIO199__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define PINMUX_GPIO199__FUNC_SDA8 (MTK_PIN_NO(199) | 1)
+#define PINMUX_GPIO199__FUNC_UDI_TDI_5 (MTK_PIN_NO(199) | 6)
+
+#define PINMUX_GPIO200__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define PINMUX_GPIO200__FUNC_SCL1 (MTK_PIN_NO(200) | 1)
+
+#define PINMUX_GPIO201__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define PINMUX_GPIO201__FUNC_SDA1 (MTK_PIN_NO(201) | 1)
+#define PINMUX_GPIO201__FUNC_TSFDC_BG_COMP (MTK_PIN_NO(201) | 7)
+
+#define PINMUX_GPIO202__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define PINMUX_GPIO202__FUNC_SCL9 (MTK_PIN_NO(202) | 1)
+#define PINMUX_GPIO202__FUNC_SCP_SCL7 (MTK_PIN_NO(202) | 2)
+#define PINMUX_GPIO202__FUNC_TP_GPIO15_AO (MTK_PIN_NO(202) | 6)
+
+#define PINMUX_GPIO203__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define PINMUX_GPIO203__FUNC_SDA9 (MTK_PIN_NO(203) | 1)
+#define PINMUX_GPIO203__FUNC_SCP_SDA7 (MTK_PIN_NO(203) | 2)
+#define PINMUX_GPIO203__FUNC_TP_GPIO9_AO (MTK_PIN_NO(203) | 6)
+
+#define PINMUX_GPIO204__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define PINMUX_GPIO204__FUNC_SCL13 (MTK_PIN_NO(204) | 1)
+#define PINMUX_GPIO204__FUNC_CMVREF6 (MTK_PIN_NO(204) | 2)
+#define PINMUX_GPIO204__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(204) | 3)
+#define PINMUX_GPIO204__FUNC_CLKM2_B (MTK_PIN_NO(204) | 5)
+#define PINMUX_GPIO204__FUNC_TP_GPIO12_AO (MTK_PIN_NO(204) | 6)
+
+#define PINMUX_GPIO205__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define PINMUX_GPIO205__FUNC_SDA13 (MTK_PIN_NO(205) | 1)
+#define PINMUX_GPIO205__FUNC_CMVREF7 (MTK_PIN_NO(205) | 2)
+#define PINMUX_GPIO205__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(205) | 3)
+#define PINMUX_GPIO205__FUNC_CLKM3_B (MTK_PIN_NO(205) | 5)
+#define PINMUX_GPIO205__FUNC_TP_GPIO13_AO (MTK_PIN_NO(205) | 6)
+
+#define PINMUX_GPIO206__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define PINMUX_GPIO206__FUNC_MD32_2_GPIO0 (MTK_PIN_NO(206) | 2)
+#define PINMUX_GPIO206__FUNC_VBUSVALID (MTK_PIN_NO(206) | 5)
+#define PINMUX_GPIO206__FUNC_UDI_TDO_3 (MTK_PIN_NO(206) | 6)
+
+#define PINMUX_GPIO207__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define PINMUX_GPIO207__FUNC_PCIE_WAKEN_2P (MTK_PIN_NO(207) | 1)
+#define PINMUX_GPIO207__FUNC_PMSR_SMAP_MAX (MTK_PIN_NO(207) | 2)
+#define PINMUX_GPIO207__FUNC_FMI2S_A_BCK (MTK_PIN_NO(207) | 4)
+#define PINMUX_GPIO207__FUNC_UDI_TDO_4 (MTK_PIN_NO(207) | 6)
+
+#define PINMUX_GPIO208__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define PINMUX_GPIO208__FUNC_PCIE_CLKREQN_2P (MTK_PIN_NO(208) | 1)
+#define PINMUX_GPIO208__FUNC_PMSR_SMAP_MAX_W (MTK_PIN_NO(208) | 2)
+#define PINMUX_GPIO208__FUNC_FMI2S_A_LRCK (MTK_PIN_NO(208) | 4)
+#define PINMUX_GPIO208__FUNC_CLKM0_B (MTK_PIN_NO(208) | 5)
+#define PINMUX_GPIO208__FUNC_UDI_TDO_5 (MTK_PIN_NO(208) | 6)
+
+#define PINMUX_GPIO209__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define PINMUX_GPIO209__FUNC_PCIE_PERSTN_2P (MTK_PIN_NO(209) | 1)
+#define PINMUX_GPIO209__FUNC_PMSR_SMAP (MTK_PIN_NO(209) | 2)
+#define PINMUX_GPIO209__FUNC_FMI2S_A_DI (MTK_PIN_NO(209) | 4)
+#define PINMUX_GPIO209__FUNC_CLKM1_B (MTK_PIN_NO(209) | 5)
+#define PINMUX_GPIO209__FUNC_UDI_TDO_6 (MTK_PIN_NO(209) | 6)
+
+#define PINMUX_GPIO210__FUNC_GPIO210 (MTK_PIN_NO(210) | 0)
+#define PINMUX_GPIO210__FUNC_CMMCLK4 (MTK_PIN_NO(210) | 1)
+
+#define PINMUX_GPIO211__FUNC_GPIO211 (MTK_PIN_NO(211) | 0)
+#define PINMUX_GPIO211__FUNC_CMMCLK5 (MTK_PIN_NO(211) | 1)
+#define PINMUX_GPIO211__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(211) | 2)
+
+#define PINMUX_GPIO212__FUNC_GPIO212 (MTK_PIN_NO(212) | 0)
+#define PINMUX_GPIO212__FUNC_CMMCLK6 (MTK_PIN_NO(212) | 1)
+#define PINMUX_GPIO212__FUNC_TP_GPIO10_AO (MTK_PIN_NO(212) | 2)
+#define PINMUX_GPIO212__FUNC_IDDIG (MTK_PIN_NO(212) | 5)
+#define PINMUX_GPIO212__FUNC_UDI_TDO_1 (MTK_PIN_NO(212) | 6)
+
+#define PINMUX_GPIO213__FUNC_GPIO213 (MTK_PIN_NO(213) | 0)
+#define PINMUX_GPIO213__FUNC_CMMCLK7 (MTK_PIN_NO(213) | 1)
+#define PINMUX_GPIO213__FUNC_TP_GPIO11_AO (MTK_PIN_NO(213) | 2)
+#define PINMUX_GPIO213__FUNC_USB_DRVVBUS (MTK_PIN_NO(213) | 5)
+#define PINMUX_GPIO213__FUNC_UDI_TDO_2 (MTK_PIN_NO(213) | 6)
+
+#define PINMUX_GPIO214__FUNC_GPIO214 (MTK_PIN_NO(214) | 0)
+#define PINMUX_GPIO214__FUNC_SCP_SCL3 (MTK_PIN_NO(214) | 1)
+#define PINMUX_GPIO214__FUNC_SDA14_E1 (MTK_PIN_NO(214) | 2)
+#define PINMUX_GPIO214__FUNC_SCL14_E2 (MTK_PIN_NO(214) | 2)
+#define PINMUX_GPIO214__FUNC_GBE1_MDC (MTK_PIN_NO(214) | 6)
+#define PINMUX_GPIO214__FUNC_GBE0_MDC (MTK_PIN_NO(214) | 7)
+
+#define PINMUX_GPIO215__FUNC_GPIO215 (MTK_PIN_NO(215) | 0)
+#define PINMUX_GPIO215__FUNC_SCP_SDA3 (MTK_PIN_NO(215) | 1)
+#define PINMUX_GPIO215__FUNC_SCL14_E1 (MTK_PIN_NO(215) | 2)
+#define PINMUX_GPIO215__FUNC_SDA14_E2 (MTK_PIN_NO(215) | 2)
+#define PINMUX_GPIO215__FUNC_GBE1_MDIO (MTK_PIN_NO(215) | 6)
+#define PINMUX_GPIO215__FUNC_GBE0_MDIO (MTK_PIN_NO(215) | 7)
+
+#define PINMUX_GPIO216__FUNC_GPIO216 (MTK_PIN_NO(216) | 0)
+#define PINMUX_GPIO216__FUNC_GPS_PPS0 (MTK_PIN_NO(216) | 1)
+
+#define PINMUX_GPIO217__FUNC_GPIO217 (MTK_PIN_NO(217) | 0)
+#define PINMUX_GPIO217__FUNC_KPROW0 (MTK_PIN_NO(217) | 1)
+#define PINMUX_GPIO217__FUNC_TP_GPIO12_AO (MTK_PIN_NO(217) | 6)
+
+#define PINMUX_GPIO218__FUNC_GPIO218 (MTK_PIN_NO(218) | 0)
+#define PINMUX_GPIO218__FUNC_KPROW1 (MTK_PIN_NO(218) | 1)
+#define PINMUX_GPIO218__FUNC_SPI0_WP (MTK_PIN_NO(218) | 2)
+#define PINMUX_GPIO218__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(218) | 3)
+#define PINMUX_GPIO218__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(218) | 5)
+#define PINMUX_GPIO218__FUNC_TP_GPIO14_AO (MTK_PIN_NO(218) | 6)
+
+#define PINMUX_GPIO219__FUNC_GPIO219 (MTK_PIN_NO(219) | 0)
+#define PINMUX_GPIO219__FUNC_KPCOL1 (MTK_PIN_NO(219) | 1)
+#define PINMUX_GPIO219__FUNC_SPI0_HOLD (MTK_PIN_NO(219) | 2)
+#define PINMUX_GPIO219__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(219) | 3)
+#define PINMUX_GPIO219__FUNC_SPMI_M_TRIG_FLAG (MTK_PIN_NO(219) | 4)
+#define PINMUX_GPIO219__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(219) | 5)
+#define PINMUX_GPIO219__FUNC_SPM_JTAG_TRSTN_VLP (MTK_PIN_NO(219) | 6)
+#define PINMUX_GPIO219__FUNC_JTRSTN_SEL1 (MTK_PIN_NO(219) | 7)
+
+#define PINMUX_GPIO220__FUNC_GPIO220 (MTK_PIN_NO(220) | 0)
+#define PINMUX_GPIO220__FUNC_SPI0_CLK (MTK_PIN_NO(220) | 1)
+#define PINMUX_GPIO220__FUNC_SPM_JTAG_TCK_VLP (MTK_PIN_NO(220) | 6)
+#define PINMUX_GPIO220__FUNC_JTCK_SEL1 (MTK_PIN_NO(220) | 7)
+
+#define PINMUX_GPIO221__FUNC_GPIO221 (MTK_PIN_NO(221) | 0)
+#define PINMUX_GPIO221__FUNC_SPI0_CSB (MTK_PIN_NO(221) | 1)
+#define PINMUX_GPIO221__FUNC_SPM_JTAG_TMS_VLP (MTK_PIN_NO(221) | 6)
+#define PINMUX_GPIO221__FUNC_JTMS_SEL1 (MTK_PIN_NO(221) | 7)
+
+#define PINMUX_GPIO222__FUNC_GPIO222 (MTK_PIN_NO(222) | 0)
+#define PINMUX_GPIO222__FUNC_SPI0_MO (MTK_PIN_NO(222) | 1)
+#define PINMUX_GPIO222__FUNC_SCP_SCL7 (MTK_PIN_NO(222) | 2)
+#define PINMUX_GPIO222__FUNC_SPM_JTAG_TDO_VLP (MTK_PIN_NO(222) | 6)
+#define PINMUX_GPIO222__FUNC_JTDO_SEL1 (MTK_PIN_NO(222) | 7)
+
+#define PINMUX_GPIO223__FUNC_GPIO223 (MTK_PIN_NO(223) | 0)
+#define PINMUX_GPIO223__FUNC_SPI0_MI (MTK_PIN_NO(223) | 1)
+#define PINMUX_GPIO223__FUNC_SCP_SDA7 (MTK_PIN_NO(223) | 2)
+#define PINMUX_GPIO223__FUNC_SPM_JTAG_TDI_VLP (MTK_PIN_NO(223) | 6)
+#define PINMUX_GPIO223__FUNC_JTDI_SEL1 (MTK_PIN_NO(223) | 7)
+
+#define PINMUX_GPIO224__FUNC_GPIO224 (MTK_PIN_NO(224) | 0)
+#define PINMUX_GPIO224__FUNC_MSDC2_CLK (MTK_PIN_NO(224) | 1)
+#define PINMUX_GPIO224__FUNC_DMIC2_CLK (MTK_PIN_NO(224) | 2)
+#define PINMUX_GPIO224__FUNC_GBE0_AUX_PPS0 (MTK_PIN_NO(224) | 3)
+#define PINMUX_GPIO224__FUNC_GBE0_TXER (MTK_PIN_NO(224) | 4)
+#define PINMUX_GPIO224__FUNC_GBE1_TXER (MTK_PIN_NO(224) | 5)
+#define PINMUX_GPIO224__FUNC_GBE1_AUX_PPS0 (MTK_PIN_NO(224) | 6)
+#define PINMUX_GPIO224__FUNC_MD32_1_TXD (MTK_PIN_NO(224) | 7)
+
+#define PINMUX_GPIO225__FUNC_GPIO225 (MTK_PIN_NO(225) | 0)
+#define PINMUX_GPIO225__FUNC_MSDC2_CMD (MTK_PIN_NO(225) | 1)
+#define PINMUX_GPIO225__FUNC_DMIC2_DAT (MTK_PIN_NO(225) | 2)
+#define PINMUX_GPIO225__FUNC_GBE0_AUX_PPS1 (MTK_PIN_NO(225) | 3)
+#define PINMUX_GPIO225__FUNC_GBE0_RXER (MTK_PIN_NO(225) | 4)
+#define PINMUX_GPIO225__FUNC_GBE1_RXER (MTK_PIN_NO(225) | 5)
+#define PINMUX_GPIO225__FUNC_GBE1_AUX_PPS1 (MTK_PIN_NO(225) | 6)
+#define PINMUX_GPIO225__FUNC_MD32_1_RXD (MTK_PIN_NO(225) | 7)
+
+#define PINMUX_GPIO226__FUNC_GPIO226 (MTK_PIN_NO(226) | 0)
+#define PINMUX_GPIO226__FUNC_MSDC2_DAT0 (MTK_PIN_NO(226) | 1)
+#define PINMUX_GPIO226__FUNC_I2SIN3_BCK (MTK_PIN_NO(226) | 2)
+#define PINMUX_GPIO226__FUNC_GBE0_AUX_PPS2 (MTK_PIN_NO(226) | 3)
+#define PINMUX_GPIO226__FUNC_GBE0_COL (MTK_PIN_NO(226) | 4)
+#define PINMUX_GPIO226__FUNC_GBE1_COL (MTK_PIN_NO(226) | 5)
+#define PINMUX_GPIO226__FUNC_GBE1_AUX_PPS2 (MTK_PIN_NO(226) | 6)
+#define PINMUX_GPIO226__FUNC_GBE1_MDC (MTK_PIN_NO(226) | 7)
+
+#define PINMUX_GPIO227__FUNC_GPIO227 (MTK_PIN_NO(227) | 0)
+#define PINMUX_GPIO227__FUNC_MSDC2_DAT1 (MTK_PIN_NO(227) | 1)
+#define PINMUX_GPIO227__FUNC_I2SIN3_LRCK (MTK_PIN_NO(227) | 2)
+#define PINMUX_GPIO227__FUNC_GBE0_AUX_PPS3 (MTK_PIN_NO(227) | 3)
+#define PINMUX_GPIO227__FUNC_GBE0_INTR (MTK_PIN_NO(227) | 4)
+#define PINMUX_GPIO227__FUNC_GBE1_INTR (MTK_PIN_NO(227) | 5)
+#define PINMUX_GPIO227__FUNC_GBE1_AUX_PPS3 (MTK_PIN_NO(227) | 6)
+#define PINMUX_GPIO227__FUNC_GBE1_MDIO (MTK_PIN_NO(227) | 7)
+
+#define PINMUX_GPIO228__FUNC_GPIO228 (MTK_PIN_NO(228) | 0)
+#define PINMUX_GPIO228__FUNC_MSDC2_DAT2 (MTK_PIN_NO(228) | 1)
+#define PINMUX_GPIO228__FUNC_I2SIN3_DI (MTK_PIN_NO(228) | 2)
+#define PINMUX_GPIO228__FUNC_GBE0_MDC (MTK_PIN_NO(228) | 3)
+#define PINMUX_GPIO228__FUNC_GBE1_MDC (MTK_PIN_NO(228) | 4)
+#define PINMUX_GPIO228__FUNC_CONN_BG_GPS_MCU_AICE_TCKC (MTK_PIN_NO(228) | 5)
+
+#define PINMUX_GPIO229__FUNC_GPIO229 (MTK_PIN_NO(229) | 0)
+#define PINMUX_GPIO229__FUNC_MSDC2_DAT3 (MTK_PIN_NO(229) | 1)
+#define PINMUX_GPIO229__FUNC_I2SOUT3_DO (MTK_PIN_NO(229) | 2)
+#define PINMUX_GPIO229__FUNC_GBE0_MDIO (MTK_PIN_NO(229) | 3)
+#define PINMUX_GPIO229__FUNC_GBE1_MDIO (MTK_PIN_NO(229) | 4)
+#define PINMUX_GPIO229__FUNC_CONN_BG_GPS_MCU_AICE_TMSC (MTK_PIN_NO(229) | 5)
+#define PINMUX_GPIO229__FUNC_AVB_CLK2 (MTK_PIN_NO(229) | 7)
+
+#define PINMUX_GPIO230__FUNC_GPIO230 (MTK_PIN_NO(230) | 0)
+#define PINMUX_GPIO230__FUNC_CONN_TOP_CLK (MTK_PIN_NO(230) | 1)
+
+#define PINMUX_GPIO231__FUNC_GPIO231 (MTK_PIN_NO(231) | 0)
+#define PINMUX_GPIO231__FUNC_CONN_TOP_DATA (MTK_PIN_NO(231) | 1)
+
+#define PINMUX_GPIO232__FUNC_GPIO232 (MTK_PIN_NO(232) | 0)
+#define PINMUX_GPIO232__FUNC_CONN_HRST_B (MTK_PIN_NO(232) | 1)
+
+#define PINMUX_GPIO233__FUNC_GPIO233 (MTK_PIN_NO(233) | 0)
+#define PINMUX_GPIO233__FUNC_I2SIN0_BCK (MTK_PIN_NO(233) | 1)
+
+#define PINMUX_GPIO234__FUNC_GPIO234 (MTK_PIN_NO(234) | 0)
+#define PINMUX_GPIO234__FUNC_I2SIN0_LRCK (MTK_PIN_NO(234) | 1)
+
+#define PINMUX_GPIO235__FUNC_GPIO235 (MTK_PIN_NO(235) | 0)
+#define PINMUX_GPIO235__FUNC_I2SIN0_DI (MTK_PIN_NO(235) | 1)
+
+#define PINMUX_GPIO236__FUNC_GPIO236 (MTK_PIN_NO(236) | 0)
+#define PINMUX_GPIO236__FUNC_I2SOUT0_DO (MTK_PIN_NO(236) | 1)
+
+#define PINMUX_GPIO237__FUNC_GPIO237 (MTK_PIN_NO(237) | 0)
+#define PINMUX_GPIO237__FUNC_CONN_UARTHUB_UART_TX (MTK_PIN_NO(237) | 1)
+#define PINMUX_GPIO237__FUNC_UTXD3 (MTK_PIN_NO(237) | 3)
+
+#define PINMUX_GPIO238__FUNC_GPIO238 (MTK_PIN_NO(238) | 0)
+#define PINMUX_GPIO238__FUNC_CONN_UARTHUB_UART_RX (MTK_PIN_NO(238) | 1)
+#define PINMUX_GPIO238__FUNC_URXD3 (MTK_PIN_NO(238) | 3)
+
+#define PINMUX_GPIO239__FUNC_GPIO239 (MTK_PIN_NO(239) | 0)
+#define PINMUX_GPIO239__FUNC_TP_UTXD_CONSYS_VLP (MTK_PIN_NO(239) | 1)
+#define PINMUX_GPIO239__FUNC_TP_URXD_CONSYS_VLP (MTK_PIN_NO(239) | 2)
+
+#define PINMUX_GPIO240__FUNC_GPIO240 (MTK_PIN_NO(240) | 0)
+#define PINMUX_GPIO240__FUNC_TP_URXD_CONSYS_VLP (MTK_PIN_NO(240) | 1)
+#define PINMUX_GPIO240__FUNC_TP_UTXD_CONSYS_VLP (MTK_PIN_NO(240) | 2)
+
+#define PINMUX_GPIO241__FUNC_GPIO241 (MTK_PIN_NO(241) | 0)
+#define PINMUX_GPIO241__FUNC_PCIE_PERSTN (MTK_PIN_NO(241) | 1)
+
+#define PINMUX_GPIO242__FUNC_GPIO242 (MTK_PIN_NO(242) | 0)
+#define PINMUX_GPIO242__FUNC_PCIE_WAKEN (MTK_PIN_NO(242) | 1)
+
+#define PINMUX_GPIO243__FUNC_GPIO243 (MTK_PIN_NO(243) | 0)
+#define PINMUX_GPIO243__FUNC_PCIE_CLKREQN (MTK_PIN_NO(243) | 1)
+
+#define PINMUX_GPIO244__FUNC_GPIO244 (MTK_PIN_NO(244) | 0)
+#define PINMUX_GPIO244__FUNC_CONN_RST (MTK_PIN_NO(244) | 1)
+
+#define PINMUX_GPIO245__FUNC_GPIO245 (MTK_PIN_NO(245) | 0)
+
+#define PINMUX_GPIO246__FUNC_GPIO246 (MTK_PIN_NO(246) | 0)
+#define PINMUX_GPIO246__FUNC_CONN_PTA_TXD0 (MTK_PIN_NO(246) | 1)
+
+#define PINMUX_GPIO247__FUNC_GPIO247 (MTK_PIN_NO(247) | 0)
+#define PINMUX_GPIO247__FUNC_CONN_PTA_RXD0 (MTK_PIN_NO(247) | 1)
+
+#define PINMUX_GPIO248__FUNC_GPIO248 (MTK_PIN_NO(248) | 0)
+#define PINMUX_GPIO248__FUNC_UCTS3 (MTK_PIN_NO(248) | 3)
+
+#define PINMUX_GPIO249__FUNC_GPIO249 (MTK_PIN_NO(249) | 0)
+#define PINMUX_GPIO249__FUNC_URTS3 (MTK_PIN_NO(249) | 3)
+
+#define PINMUX_GPIO250__FUNC_GPIO250 (MTK_PIN_NO(250) | 0)
+
+#define PINMUX_GPIO251__FUNC_GPIO251 (MTK_PIN_NO(251) | 0)
+#define PINMUX_GPIO251__FUNC_IDDIG_1P (MTK_PIN_NO(251) | 1)
+
+#define PINMUX_GPIO252__FUNC_GPIO252 (MTK_PIN_NO(252) | 0)
+#define PINMUX_GPIO252__FUNC_USB_DRVVBUS_1P (MTK_PIN_NO(252) | 1)
+
+#define PINMUX_GPIO253__FUNC_GPIO253 (MTK_PIN_NO(253) | 0)
+#define PINMUX_GPIO253__FUNC_VBUSVALID_1P (MTK_PIN_NO(253) | 1)
+
+#define PINMUX_GPIO254__FUNC_GPIO254 (MTK_PIN_NO(254) | 0)
+#define PINMUX_GPIO254__FUNC_IDDIG_2P (MTK_PIN_NO(254) | 1)
+
+#define PINMUX_GPIO255__FUNC_GPIO255 (MTK_PIN_NO(255) | 0)
+#define PINMUX_GPIO255__FUNC_USB_DRVVBUS_2P (MTK_PIN_NO(255) | 1)
+
+#define PINMUX_GPIO256__FUNC_GPIO256 (MTK_PIN_NO(256) | 0)
+#define PINMUX_GPIO256__FUNC_VBUSVALID_2P (MTK_PIN_NO(256) | 1)
+
+#define PINMUX_GPIO257__FUNC_GPIO257 (MTK_PIN_NO(257) | 0)
+#define PINMUX_GPIO257__FUNC_VBUSVALID_3P (MTK_PIN_NO(257) | 1)
+
+#define PINMUX_GPIO258__FUNC_GPIO258 (MTK_PIN_NO(258) | 0)
+#define PINMUX_GPIO258__FUNC_AVB_CLK1 (MTK_PIN_NO(258) | 7)
+
+#define PINMUX_GPIO259__FUNC_GPIO259 (MTK_PIN_NO(259) | 0)
+#define PINMUX_GPIO259__FUNC_GBE0_TXD0 (MTK_PIN_NO(259) | 1)
+#define PINMUX_GPIO259__FUNC_GBE1_TXD0 (MTK_PIN_NO(259) | 2)
+
+#define PINMUX_GPIO260__FUNC_GPIO260 (MTK_PIN_NO(260) | 0)
+#define PINMUX_GPIO260__FUNC_GBE0_TXD1 (MTK_PIN_NO(260) | 1)
+#define PINMUX_GPIO260__FUNC_GBE1_TXD1 (MTK_PIN_NO(260) | 2)
+
+#define PINMUX_GPIO261__FUNC_GPIO261 (MTK_PIN_NO(261) | 0)
+#define PINMUX_GPIO261__FUNC_GBE0_TXC (MTK_PIN_NO(261) | 1)
+#define PINMUX_GPIO261__FUNC_GBE1_TXC (MTK_PIN_NO(261) | 2)
+
+#define PINMUX_GPIO262__FUNC_GPIO262 (MTK_PIN_NO(262) | 0)
+#define PINMUX_GPIO262__FUNC_GBE0_TXEN (MTK_PIN_NO(262) | 1)
+#define PINMUX_GPIO262__FUNC_GBE1_TXEN (MTK_PIN_NO(262) | 2)
+
+#define PINMUX_GPIO263__FUNC_GPIO263 (MTK_PIN_NO(263) | 0)
+#define PINMUX_GPIO263__FUNC_GBE0_RXD0 (MTK_PIN_NO(263) | 1)
+#define PINMUX_GPIO263__FUNC_GBE1_RXD0 (MTK_PIN_NO(263) | 2)
+#define PINMUX_GPIO263__FUNC_GBE0_AUX_PPS0 (MTK_PIN_NO(263) | 3)
+
+#define PINMUX_GPIO264__FUNC_GPIO264 (MTK_PIN_NO(264) | 0)
+#define PINMUX_GPIO264__FUNC_GBE0_RXD1 (MTK_PIN_NO(264) | 1)
+#define PINMUX_GPIO264__FUNC_GBE1_RXD1 (MTK_PIN_NO(264) | 2)
+#define PINMUX_GPIO264__FUNC_GBE0_AUX_PPS1 (MTK_PIN_NO(264) | 3)
+
+#define PINMUX_GPIO265__FUNC_GPIO265 (MTK_PIN_NO(265) | 0)
+#define PINMUX_GPIO265__FUNC_GBE0_RXC (MTK_PIN_NO(265) | 1)
+#define PINMUX_GPIO265__FUNC_GBE1_RXC (MTK_PIN_NO(265) | 2)
+#define PINMUX_GPIO265__FUNC_GBE0_AUX_PPS2 (MTK_PIN_NO(265) | 3)
+
+#define PINMUX_GPIO266__FUNC_GPIO266 (MTK_PIN_NO(266) | 0)
+#define PINMUX_GPIO266__FUNC_GBE0_RXDV (MTK_PIN_NO(266) | 1)
+#define PINMUX_GPIO266__FUNC_GBE1_RXDV (MTK_PIN_NO(266) | 2)
+#define PINMUX_GPIO266__FUNC_GBE0_AUX_PPS3 (MTK_PIN_NO(266) | 3)
+
+#define PINMUX_GPIO267__FUNC_GPIO267 (MTK_PIN_NO(267) | 0)
+#define PINMUX_GPIO267__FUNC_GBE0_TXD2 (MTK_PIN_NO(267) | 1)
+#define PINMUX_GPIO267__FUNC_GBE1_TXD2 (MTK_PIN_NO(267) | 2)
+#define PINMUX_GPIO267__FUNC_GBE0_RXER (MTK_PIN_NO(267) | 3)
+#define PINMUX_GPIO267__FUNC_GBE1_RXER (MTK_PIN_NO(267) | 4)
+
+#define PINMUX_GPIO268__FUNC_GPIO268 (MTK_PIN_NO(268) | 0)
+#define PINMUX_GPIO268__FUNC_GBE0_TXD3 (MTK_PIN_NO(268) | 1)
+#define PINMUX_GPIO268__FUNC_GBE1_TXD3 (MTK_PIN_NO(268) | 2)
+
+#define PINMUX_GPIO269__FUNC_GPIO269 (MTK_PIN_NO(269) | 0)
+#define PINMUX_GPIO269__FUNC_GBE0_RXD2 (MTK_PIN_NO(269) | 1)
+#define PINMUX_GPIO269__FUNC_GBE1_RXD2 (MTK_PIN_NO(269) | 2)
+#define PINMUX_GPIO269__FUNC_GBE0_MDC (MTK_PIN_NO(269) | 3)
+
+#define PINMUX_GPIO270__FUNC_GPIO270 (MTK_PIN_NO(270) | 0)
+#define PINMUX_GPIO270__FUNC_GBE0_RXD3 (MTK_PIN_NO(270) | 1)
+#define PINMUX_GPIO270__FUNC_GBE1_RXD3 (MTK_PIN_NO(270) | 2)
+#define PINMUX_GPIO270__FUNC_GBE0_MDIO (MTK_PIN_NO(270) | 3)
+
+#endif /* __MT8196_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
index 50cbaefa1a99..c8418888268d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -4,6 +4,7 @@
  * Authors:
  * Fabien Parent <fparent@baylibre.com>
  * Bernhard Rosenkränzer <bero@baylibre.com>
+ * Alexandre Mergnat <amergnat@baylibre.com>
  */
 
 /dts-v1/;
@@ -20,12 +21,28 @@
 
 	aliases {
 		serial0 = &uart0;
+		ethernet = &ethernet;
 	};
 
 	chosen {
 		stdout-path = "serial0:921600n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			hdmi_connector_in: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_connector_out>;
+			};
+		};
+	};
+
 	firmware {
 		optee {
 			compatible = "linaro,optee-tz";
@@ -61,6 +78,21 @@
 		enable-active-high;
 	};
 
+	reg_vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	touch0_fixed_3v3: regulator-vio33tp {
+		compatible = "regulator-fixed";
+		regulator-name = "vio33_tp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vsys>;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -86,6 +118,38 @@
 			reg = <0 0x43200000 0 0x00c00000>;
 		};
 	};
+
+	sound: sound {
+		compatible = "mediatek,mt8365-mt6357";
+		pinctrl-names = "default",
+				"dmic",
+				"miso_off",
+				"miso_on",
+				"mosi_off",
+				"mosi_on";
+		pinctrl-0 = <&aud_default_pins>;
+		pinctrl-1 = <&aud_dmic_pins>;
+		pinctrl-2 = <&aud_miso_off_pins>;
+		pinctrl-3 = <&aud_miso_on_pins>;
+		pinctrl-4 = <&aud_mosi_off_pins>;
+		pinctrl-5 = <&aud_mosi_on_pins>;
+		mediatek,platform = <&afe>;
+	};
+
+	vsys_lcm_reg: regulator-vsys-lcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pio 129 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "vsys_lcm";
+	};
+
+};
+
+&afe {
+	mediatek,dmic-mode = <1>;
+	status = "okay";
 };
 
 &cpu0 {
@@ -108,13 +172,102 @@
 	sram-supply = <&mt6357_vsram_proc_reg>;
 };
 
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&dpi0 {
+	pinctrl-0 = <&dpi_default_pins>;
+	pinctrl-1 = <&dpi_idle_pins>;
+	pinctrl-names = "default", "sleep";
+	/*
+	 * Ethernet and HDMI (DPI0) are sharing pins.
+	 * Only one can be enabled at a time and require the physical switch
+	 * SW2101 to be set on LAN position
+	 */
+	status = "disabled";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			dpi0_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&rdma1_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			dpi0_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&it66121_in>;
+			};
+		};
+	};
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "startek,kd070fhfid015";
+		reg = <0>;
+		enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&mt6357_vsim1_reg>;
+		power-supply = <&vsys_lcm_reg>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			panel_in: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			dsi0_in: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			dsi0_out: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
 &ethernet {
 	pinctrl-0 = <&ethernet_pins>;
 	pinctrl-names = "default";
 	phy-handle = <&eth_phy>;
 	phy-mode = "rmii";
 	/*
-	 * Ethernet and HDMI (DSI0) are sharing pins.
+	 * Ethernet and HDMI (DPI0) are sharing pins.
 	 * Only one can be enabled at a time and require the physical switch
 	 * SW2101 to be set on LAN position
 	 * mt6357_vibr_reg and mt6357_vsim2_reg are needed to supply ethernet
@@ -138,6 +291,68 @@
 	status = "okay";
 };
 
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-div = <2>;
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	it66121_hdmi: hdmi@4c {
+		compatible = "ite,it66121";
+		reg = <0x4c>;
+		#sound-dai-cells = <0>;
+		interrupt-parent = <&pio>;
+		interrupts = <68 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&ite_pins>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 69 GPIO_ACTIVE_LOW>;
+		vcn18-supply = <&mt6357_vsim2_reg>;
+		vcn33-supply = <&mt6357_vibr_reg>;
+		vrf12-supply = <&mt6357_vrf12_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				it66121_in: endpoint@0 {
+					reg = <0>;
+					bus-width = <12>;
+					remote-endpoint = <&dpi0_out>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+				hdmi_connector_out: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupts-extended = <&pio 78 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+		irq-gpios = <&pio 78 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 79 GPIO_ACTIVE_LOW>;
+		AVDD28-supply = <&touch0_fixed_3v3>;
+		VDDIO-supply = <&mt6357_vrf12_reg>;
+	};
+};
+
 &mmc0 {
 	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>;
 	assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
@@ -178,9 +393,120 @@
 	interrupts-extended = <&pio 145 IRQ_TYPE_LEVEL_HIGH>;
 	interrupt-controller;
 	#interrupt-cells = <2>;
+	mediatek,micbias0-microvolt = <1900000>;
+	mediatek,micbias1-microvolt = <1700000>;
+};
+
+&mt6357_vsim1_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
 };
 
 &pio {
+	aud_default_pins: audiodefault-pins {
+		clk-dat-pins {
+			pinmux = <MT8365_PIN_72_CMDAT4__FUNC_I2S3_BCK>,
+				 <MT8365_PIN_73_CMDAT5__FUNC_I2S3_LRCK>,
+				 <MT8365_PIN_74_CMDAT6__FUNC_I2S3_MCK>,
+				 <MT8365_PIN_75_CMDAT7__FUNC_I2S3_DO>;
+		};
+	};
+
+	aud_dmic_pins: audiodmic-pins {
+		clk-dat-pins {
+			pinmux = <MT8365_PIN_117_DMIC0_CLK__FUNC_DMIC0_CLK>,
+				 <MT8365_PIN_118_DMIC0_DAT0__FUNC_DMIC0_DAT0>,
+				 <MT8365_PIN_119_DMIC0_DAT1__FUNC_DMIC0_DAT1>;
+		};
+	};
+
+	aud_miso_off_pins: misooff-pins {
+		clk-dat-pins {
+			pinmux = <MT8365_PIN_53_AUD_CLK_MISO__FUNC_GPIO53>,
+				 <MT8365_PIN_54_AUD_SYNC_MISO__FUNC_GPIO54>,
+				 <MT8365_PIN_55_AUD_DAT_MISO0__FUNC_GPIO55>,
+				 <MT8365_PIN_56_AUD_DAT_MISO1__FUNC_GPIO56>;
+			input-enable;
+			bias-pull-down;
+			drive-strength = <2>;
+		};
+	};
+
+	aud_miso_on_pins: misoon-pins {
+		clk-dat-pins {
+			pinmux = <MT8365_PIN_53_AUD_CLK_MISO__FUNC_AUD_CLK_MISO>,
+				 <MT8365_PIN_54_AUD_SYNC_MISO__FUNC_AUD_SYNC_MISO>,
+				 <MT8365_PIN_55_AUD_DAT_MISO0__FUNC_AUD_DAT_MISO0>,
+				 <MT8365_PIN_56_AUD_DAT_MISO1__FUNC_AUD_DAT_MISO1>;
+			drive-strength = <6>;
+		};
+	};
+
+	aud_mosi_off_pins: mosioff-pins {
+		clk-dat-pins {
+			pinmux = <MT8365_PIN_49_AUD_CLK_MOSI__FUNC_GPIO49>,
+				 <MT8365_PIN_50_AUD_SYNC_MOSI__FUNC_GPIO50>,
+				 <MT8365_PIN_51_AUD_DAT_MOSI0__FUNC_GPIO51>,
+				 <MT8365_PIN_52_AUD_DAT_MOSI1__FUNC_GPIO52>;
+			input-enable;
+			bias-pull-down;
+			drive-strength = <2>;
+		};
+	};
+
+	aud_mosi_on_pins: mosion-pins {
+		clk-dat-pins {
+			pinmux = <MT8365_PIN_49_AUD_CLK_MOSI__FUNC_AUD_CLK_MOSI>,
+				 <MT8365_PIN_50_AUD_SYNC_MOSI__FUNC_AUD_SYNC_MOSI>,
+				 <MT8365_PIN_51_AUD_DAT_MOSI0__FUNC_AUD_DAT_MOSI0>,
+				 <MT8365_PIN_52_AUD_DAT_MOSI1__FUNC_AUD_DAT_MOSI1>;
+			drive-strength = <6>;
+		};
+	};
+
+	dpi_default_pins: dpi-default-pins {
+		pins {
+			pinmux = <MT8365_PIN_0_GPIO0__FUNC_DPI_D0>,
+				 <MT8365_PIN_1_GPIO1__FUNC_DPI_D1>,
+				 <MT8365_PIN_2_GPIO2__FUNC_DPI_D2>,
+				 <MT8365_PIN_3_GPIO3__FUNC_DPI_D3>,
+				 <MT8365_PIN_4_GPIO4__FUNC_DPI_D4>,
+				 <MT8365_PIN_5_GPIO5__FUNC_DPI_D5>,
+				 <MT8365_PIN_6_GPIO6__FUNC_DPI_D6>,
+				 <MT8365_PIN_7_GPIO7__FUNC_DPI_D7>,
+				 <MT8365_PIN_8_GPIO8__FUNC_DPI_D8>,
+				 <MT8365_PIN_9_GPIO9__FUNC_DPI_D9>,
+				 <MT8365_PIN_10_GPIO10__FUNC_DPI_D10>,
+				 <MT8365_PIN_11_GPIO11__FUNC_DPI_D11>,
+				 <MT8365_PIN_12_GPIO12__FUNC_DPI_DE>,
+				 <MT8365_PIN_13_GPIO13__FUNC_DPI_VSYNC>,
+				 <MT8365_PIN_14_GPIO14__FUNC_DPI_CK>,
+				 <MT8365_PIN_15_GPIO15__FUNC_DPI_HSYNC>;
+			drive-strength = <4>;
+		};
+	};
+
+	dpi_idle_pins: dpi-idle-pins {
+		pins {
+			pinmux = <MT8365_PIN_0_GPIO0__FUNC_GPIO0>,
+				 <MT8365_PIN_1_GPIO1__FUNC_GPIO1>,
+				 <MT8365_PIN_2_GPIO2__FUNC_GPIO2>,
+				 <MT8365_PIN_3_GPIO3__FUNC_GPIO3>,
+				 <MT8365_PIN_4_GPIO4__FUNC_GPIO4>,
+				 <MT8365_PIN_5_GPIO5__FUNC_GPIO5>,
+				 <MT8365_PIN_6_GPIO6__FUNC_GPIO6>,
+				 <MT8365_PIN_7_GPIO7__FUNC_GPIO7>,
+				 <MT8365_PIN_8_GPIO8__FUNC_GPIO8>,
+				 <MT8365_PIN_9_GPIO9__FUNC_GPIO9>,
+				 <MT8365_PIN_10_GPIO10__FUNC_GPIO10>,
+				 <MT8365_PIN_11_GPIO11__FUNC_GPIO11>,
+				 <MT8365_PIN_12_GPIO12__FUNC_GPIO12>,
+				 <MT8365_PIN_13_GPIO13__FUNC_GPIO13>,
+				 <MT8365_PIN_14_GPIO14__FUNC_GPIO14>,
+				 <MT8365_PIN_15_GPIO15__FUNC_GPIO15>;
+		};
+	};
+
 	ethernet_pins: ethernet-pins {
 		phy_reset_pins {
 			pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>;
@@ -222,6 +548,33 @@
 		};
 	};
 
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>,
+				 <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
+			bias-pull-up;
+		};
+	};
+
+	ite_pins: ite-pins {
+		irq_ite_pins {
+			pinmux = <MT8365_PIN_68_CMDAT0__FUNC_GPIO68>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pwr_pins {
+			pinmux = <MT8365_PIN_70_CMDAT2__FUNC_GPIO70>,
+				 <MT8365_PIN_71_CMDAT3__FUNC_GPIO71>;
+			output-high;
+		};
+
+		rst_ite_pins {
+			pinmux = <MT8365_PIN_69_CMDAT1__FUNC_GPIO69>;
+			output-high;
+		};
+	};
+
 	mmc0_default_pins: mmc0-default-pins {
 		clk-pins {
 			pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
@@ -308,7 +661,7 @@
 	mmc1_uhs_pins: mmc1-uhs-pins {
 		clk-pins {
 			pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -319,11 +672,24 @@
 				 <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
 				 <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
 
+	touch_pins: touch-pins {
+		ctp-int1-pins {
+			pinmux = <MT8365_PIN_78_CMHSYNC__FUNC_GPIO78>;
+			input-enable;
+			bias-disable;
+		};
+
+		rst-pins {
+			pinmux = <MT8365_PIN_79_CMVSYNC__FUNC_GPIO79>;
+			output-low;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		pins {
 			pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
@@ -377,6 +743,10 @@
 	status = "okay";
 };
 
+&rdma1_out {
+	remote-endpoint = <&dpi0_in>;
+};
+
 &ssusb {
 	dr_mode = "otg";
 	maximum-speed = "high-speed";
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index 24581f7410aa..e6d2b3221a3b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -2,12 +2,15 @@
 /*
  * (C) 2018 MediaTek Inc.
  * Copyright (C) 2022 BayLibre SAS
- * Fabien Parent <fparent@baylibre.com>
- * Bernhard Rosenkränzer <bero@baylibre.com>
+ * Authors: Fabien Parent <fparent@baylibre.com>
+ *	    Bernhard Rosenkränzer <bero@baylibre.com>
+ *	    Alexandre Mergnat <amergnat@baylibre.com>
  */
+
 #include <dt-bindings/clock/mediatek,mt8365-clk.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/mediatek,mt8365-power.h>
 
@@ -17,6 +20,19 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		aal0 = &aal0;
+		ccorr0 = &ccorr0;
+		color0 = &color0;
+		dither0 = &dither0;
+		dpi0 = &dpi0;
+		dsi0 = &dsi0;
+		gamma0 = &gamma0;
+		ovl0 = &ovl0;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -300,9 +316,8 @@
 		};
 
 		scpsys: syscon@10006000 {
-			compatible = "mediatek,mt8365-syscfg", "syscon", "simple-mfd";
+			compatible = "mediatek,mt8365-scpsys", "syscon", "simple-mfd";
 			reg = <0 0x10006000 0 0x1000>;
-			#power-domain-cells = <1>;
 
 			/* System Power Manager */
 			spm: power-controller {
@@ -448,7 +463,8 @@
 		};
 
 		keypad: keypad@10010000 {
-			compatible = "mediatek,mt6779-keypad";
+			compatible = "mediatek,mt8365-keypad",
+				     "mediatek,mt6779-keypad";
 			reg = <0 0x10010000 0 0x1000>;
 			wakeup-source;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
@@ -607,6 +623,15 @@
 			status = "disabled";
 		};
 
+		disp_pwm: pwm@1100e000 {
+			compatible = "mediatek,mt8365-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			clock-names = "main", "mm";
+			clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>, <&infracfg CLK_IFR_DISP_PWM>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			#pwm-cells = <2>;
+		};
+
 		i2c3: i2c@1100f000 {
 			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
 			reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>;
@@ -703,6 +728,15 @@
 			status = "disabled";
 		};
 
+		mipi_tx0: dsi-phy@11c00000 {
+			compatible = "mediatek,mt8365-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c00000 0 0x800>;
+			clock-output-names = "mipi_tx0_pll";
+			clocks = <&clk26m>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+		};
+
 		u3phy: t-phy@11cc0000 {
 			compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
 			#address-cells = <1>;
@@ -730,6 +764,26 @@
 			compatible = "mediatek,mt8365-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mmsys_main: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&ovl0_in>;
+				};
+				mmsys_ext: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&rdma1_in>;
+				};
+			};
+		};
+
+		mutex: mutex@14001000 {
+			compatible =  "mediatek,mt8365-disp-mutex";
+			reg = <0 0x14001000 0 0x1000>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
 		};
 
 		smi_common: smi@14002000 {
@@ -755,6 +809,290 @@
 			mediatek,larb-id = <0>;
 		};
 
+		ovl0: ovl@1400b000 {
+			compatible = "mediatek,mt8365-disp-ovl", "mediatek,mt8192-disp-ovl";
+			reg = <0 0x1400b000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_OVL0>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_DISP_OVL0>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					ovl0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mmsys_main>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					ovl0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
+		};
+
+		rdma0: rdma@1400d000 {
+			compatible = "mediatek,mt8365-disp-rdma", "mediatek,mt8183-disp-rdma";
+			reg = <0 0x1400d000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_RDMA0>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+			mediatek,rdma-fifo-size = <5120>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					rdma0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					rdma0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
+		};
+
+		color0: color@1400f000 {
+			compatible = "mediatek,mt8365-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x1400f000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_COLOR0>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					color0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					color0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
+		};
+
+		ccorr0: ccorr@14010000 {
+			compatible = "mediatek,mt8365-disp-ccorr", "mediatek,mt8183-disp-ccorr";
+			reg = <0 0x14010000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_CCORR0>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					ccorr0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					ccorr0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
+		};
+
+		aal0: aal@14011000 {
+			compatible = "mediatek,mt8365-disp-aal", "mediatek,mt8183-disp-aal";
+			reg = <0 0x14011000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_AAL0>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					aal0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					aal0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
+		};
+
+		gamma0: gamma@14012000 {
+			compatible = "mediatek,mt8365-disp-gamma", "mediatek,mt8183-disp-gamma";
+			reg = <0 0x14012000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_GAMMA0>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					gamma0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					gamma0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&dither0_in>;
+					};
+				};
+			};
+		};
+
+		dither0: dither@14013000 {
+			compatible = "mediatek,mt8365-disp-dither", "mediatek,mt8183-disp-dither";
+			reg = <0 0x14013000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_DITHER0>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					dither0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&gamma0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					dither0_out: endpoint@0 {
+						reg = <0>;
+					};
+				};
+			};
+		};
+
+		dsi0: dsi@14014000 {
+			compatible = "mediatek,mt8365-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x14014000 0 0x1000>;
+			clock-names = "engine", "digital", "hs";
+			clocks = <&mmsys CLK_MM_MM_DSI0>,
+				 <&mmsys CLK_MM_DSI0_DIG_DSI>,
+				 <&mipi_tx0>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+			phy-names = "dphy";
+			phys = <&mipi_tx0>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+		};
+
+		rdma1: rdma@14016000 {
+			compatible = "mediatek,mt8365-disp-rdma", "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14016000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_RDMA1>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+			mediatek,rdma-fifo-size = <2048>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					rdma1_in: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mmsys_ext>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					rdma1_out: endpoint@1 {
+						reg = <1>;
+					};
+				};
+			};
+		};
+
+		dpi0: dpi@14018000 {
+			compatible = "mediatek,mt8365-dpi", "mediatek,mt8192-dpi";
+			reg = <0 0x14018000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DPI0_DPI0>,
+				 <&mmsys CLK_MM_MM_DPI0>,
+				 <&apmixedsys CLK_APMIXED_LVDSPLL>;
+			clock-names = "pixel", "engine", "pll";
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			status = "disabled";
+		};
+
 		camsys: syscon@15000000 {
 			compatible = "mediatek,mt8365-imgsys", "syscon";
 			reg = <0 0x15000000 0 0x1000>;
@@ -813,6 +1151,43 @@
 			reg = <0 0x19020000 0 0x1000>;
 			#clock-cells = <1>;
 		};
+
+		afe: audio-controller@11220000 {
+			compatible = "mediatek,mt8365-afe-pcm";
+			reg = <0 0x11220000 0 0x1000>;
+			#sound-dai-cells = <0>;
+			clocks = <&clk26m>,
+				 <&topckgen CLK_TOP_AUDIO_SEL>,
+				 <&topckgen CLK_TOP_AUD_I2S0_M>,
+				 <&topckgen CLK_TOP_AUD_I2S1_M>,
+				 <&topckgen CLK_TOP_AUD_I2S2_M>,
+				 <&topckgen CLK_TOP_AUD_I2S3_M>,
+				 <&topckgen CLK_TOP_AUD_ENGEN1_SEL>,
+				 <&topckgen CLK_TOP_AUD_ENGEN2_SEL>,
+				 <&topckgen CLK_TOP_AUD_1_SEL>,
+				 <&topckgen CLK_TOP_AUD_2_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S0_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S1_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S2_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S3_SEL>;
+			clock-names = "top_clk26m_clk",
+				      "top_audio_sel",
+				      "audio_i2s0_m",
+				      "audio_i2s1_m",
+				      "audio_i2s2_m",
+				      "audio_i2s3_m",
+				      "engen1",
+				      "engen2",
+				      "aud1",
+				      "aud2",
+				      "i2s0_m_sel",
+				      "i2s1_m_sel",
+				      "i2s2_m_sel",
+				      "i2s3_m_sel";
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_AUDIO>;
+			status = "disabled";
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/mediatek/mt8370-genio-510-evk.dts b/arch/arm64/boot/dts/mediatek/mt8370-genio-510-evk.dts
new file mode 100644
index 000000000000..71a8cbed1df6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8370-genio-510-evk.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2025 Collabora Ltd.
+ * Author: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+/dts-v1/;
+
+#include "mt8370.dtsi"
+#include "mt8390-genio-common.dtsi"
+
+/ {
+	model = "MediaTek Genio-510 EVK";
+	compatible = "mediatek,mt8370-evk", "mediatek,mt8370", "mediatek,mt8188";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x1 0x00000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8370.dtsi b/arch/arm64/boot/dts/mediatek/mt8370.dtsi
new file mode 100644
index 000000000000..7ac8b8d03494
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8370.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2025 Collabora Ltd.
+ * Author: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+/dts-v1/;
+#include "mt8188.dtsi"
+
+/ {
+	compatible = "mediatek,mt8370";
+
+	cpus {
+		/delete-node/ cpu@400;
+		/delete-node/ cpu@500;
+
+		cpu-map {
+			cluster0 {
+				/delete-node/ core4;
+				/delete-node/ core5;
+			};
+		};
+	};
+};
+
+&cpu6 {
+	clock-frequency = <2200000000>;
+};
+
+&cpu7 {
+	clock-frequency = <2200000000>;
+};
+
+&cpu_little0_cooling_map0 {
+	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
+
+&cpu_little1_cooling_map0 {
+	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
+
+&cpu_little2_cooling_map0 {
+	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
+
+&cpu_little3_cooling_map0 {
+	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
+
+/*
+ * Please note that overriding compatibles is a discouraged practice and is a
+ * clear indication of nodes not being, well, compatible!
+ *
+ * This is a special case, where the GPU is the same as MT8188, but with one
+ * of the cores fused out in this lower-binned SoC.
+ */
+&gpu {
+	compatible = "mediatek,mt8370-mali", "arm,mali-valhall-jm";
+
+	power-domains = <&spm MT8188_POWER_DOMAIN_MFG2>,
+			<&spm MT8188_POWER_DOMAIN_MFG3>;
+
+	power-domain-names = "core0", "core1";
+};
+
+&ppi_cluster0 {
+	affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
new file mode 100644
index 000000000000..612336713a64
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Chris Chen <chris-qj.chen@mediatek.com>
+ *	   Pablo Sun <pablo.sun@mediatek.com>
+ *	   Macpaul Lin <macpaul.lin@mediatek.com>
+ */
+/dts-v1/;
+
+#include "mt8188.dtsi"
+#include "mt8390-genio-common.dtsi"
+
+/ {
+	model = "MediaTek Genio-700 EVK";
+	compatible = "mediatek,mt8390-evk", "mediatek,mt8390",
+		     "mediatek,mt8188";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x2 0x00000000>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
new file mode 100644
index 000000000000..a2cdecd2b903
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
@@ -0,0 +1,1370 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Chris Chen <chris-qj.chen@mediatek.com>
+ *         Pablo Sun <pablo.sun@mediatek.com>
+ *         Macpaul Lin <macpaul.lin@mediatek.com>
+ *
+ * Copyright (C) 2025 Collabora Ltd.
+ *                    Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>   
+ */
+
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	aliases {
+		dsi0 = &disp_dsi0;
+		ethernet0 = &eth;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+	};
+
+	backlight_lcm1: backlight-lcm1 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		num-interpolated-steps = <1023>;
+		power-supply = <&reg_vsys>;
+		pwms = <&disp_pwm1 0 500000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	dmic_codec: dmic-codec {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <30>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		apu_mem: memory@55000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x55000000 0 0x1400000>; /* 20 MB */
+		};
+
+		vpu_mem: memory@57000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x57000000 0 0x1400000>; /* 20 MB */
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	common_fixed_5v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_vsys>;
+	};
+
+	edp_panel_fixed_3v3: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vedp_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_3v3_en_pins>;
+		vin-supply = <&reg_vsys>;
+	};
+
+	gpio_fixed_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "ext_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_vsys>;
+	};
+
+	/* system wide 4.2V power rail from charger */
+	reg_vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* used by mmc2 */
+	sdio_fixed_1v8: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio18_conn";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	/* used by mmc2 */
+	sdio_fixed_3v3: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "wifi_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 74 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_vsys>;
+	};
+
+	touch0_fixed_3v3: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio33_tp1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vsys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_vreg_pins>;
+	};
+
+	usb_hub_fixed_3v3: regulator-6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vhub_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */
+		startup-delay-us = <10000>;
+		enable-active-high;
+		vin-supply = <&reg_vsys>;
+	};
+
+	usb_p0_vbus: regulator-7 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_p0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 84 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vsys>;
+	};
+
+	usb_p1_vbus: regulator-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_p1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 87 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vsys>;
+	};
+
+	/* used by ssusb2 */
+	usb_p2_vbus: regulator-9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_p2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	lcm1_iovcc: regulator-vio18-lcm1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio18_lcm1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&pio 111 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_vreg_en_pins>;
+		vin-supply = <&reg_vsys>;
+	};
+
+	lcm1_vddp: regulator-vsys-lcm1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_lcm1";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vsys>;
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
+&disp_dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "startek,kd070fhfid078", "himax,hx8279";
+		reg = <0>;
+		backlight = <&backlight_lcm1>;
+		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&lcm1_iovcc>;
+		vdd-supply = <&lcm1_vddp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+};
+
+&disp_pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm1_pins>;
+	status = "okay";
+};
+
+&dither0_in {
+	remote-endpoint = <&postmask0_out>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&gamma0_out {
+	remote-endpoint = <&postmask0_in>;
+};
+
+&gpu {
+	mali-supply = <&mt6359_vproc2_buck_reg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&touch0_fixed_3v3>;
+		VDDIO-supply = <&mt6359_vio18_ldo_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	typec-mux@48 {
+		compatible = "ite,it5205";
+		reg = <0x48>;
+
+		mode-switch;
+		orientation-switch;
+
+		vcc-supply = <&mt6359_vcn33_1_bt_ldo_reg>;
+
+		port {
+			it5205_sbu_mux: endpoint {
+				remote-endpoint = <&typec_sbu_out>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	rt1715@4e {
+		compatible = "richtek,rt1715";
+		reg = <0x4e>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tcpci_int_pins>;
+		vbus-supply = <&usb_p1_vbus>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			op-sink-microwatt = <10000000>;
+			power-role = "dual";
+			try-power-role  = "sink";
+			pd-revision = /bits/ 8 <0x03 0x00 0x01 0x08>;
+
+			sink-pdos = <PDO_FIXED(5000, 2000,
+					       PDO_FIXED_DUAL_ROLE |
+					       PDO_FIXED_DATA_SWAP)>;
+			source-pdos = <PDO_FIXED(5000, 2000,
+						 PDO_FIXED_DUAL_ROLE |
+						 PDO_FIXED_DATA_SWAP)>;
+
+			altmodes {
+				displayport {
+					svid = /bits/ 16 <0xff01>;
+					vdo = <0x001c1c47>;
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					typec_con_hs: endpoint {
+						remote-endpoint = <&mtu3_hs1_role_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					typec_con_ss: endpoint {
+						remote-endpoint = <&xhci_ss_ep>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					typec_sbu_out: endpoint {
+						remote-endpoint = <&it5205_sbu_mux>;
+					};
+
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mfg0 {
+	domain-supply = <&mt6359_vproc2_buck_reg>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mipi_tx_config0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x1481b>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&mt6359_vpa_buck_reg>;
+	vqmmc-supply = <&mt6359_vsim1_ldo_reg>;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn18_ldo_reg {
+	regulator-name = "vcn18_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-name = "vcn33_2_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-name = "dvdd_proc_l";
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-name = "dvdd_core";
+	regulator-always-on;
+};
+
+&mt6359_vpa_buck_reg {
+	regulator-name = "vpa_pmu";
+	regulator-max-microvolt = <3100000>;
+};
+
+&mt6359_vproc2_buck_reg {
+	/* The name "vgpu" is required by mtk-regulator-coupler */
+	regulator-name = "vgpu";
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-name = "dvdd_adsp";
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-name = "va12_abb2_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vsim1_ldo_reg {
+	regulator-name = "vsim1_pmu";
+	regulator-enable-ramp-delay = <480>;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	/* The name "vsram_gpu" is required by mtk-regulator-coupler */
+	regulator-name = "vsram_gpu";
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-name = "vufs18_pmu";
+	regulator-always-on;
+};
+
+&mt6359codec {
+	mediatek,mic-type-0 = <1>; /* ACC */
+	mediatek,mic-type-1 = <3>; /* DCC */
+};
+
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default_pins>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio {
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>,
+				 <PINMUX_GPIO107__FUNC_B0_I2SIN_MCK>,
+				 <PINMUX_GPIO108__FUNC_B0_I2SIN_BCK>,
+				 <PINMUX_GPIO109__FUNC_B0_I2SIN_WS>,
+				 <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>,
+				 <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>,
+				 <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>,
+				 <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>,
+				 <PINMUX_GPIO117__FUNC_O_I2SO2_D0>,
+				 <PINMUX_GPIO118__FUNC_O_I2SO2_D1>,
+				 <PINMUX_GPIO121__FUNC_B0_PCM_CLK>,
+				 <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>,
+				 <PINMUX_GPIO124__FUNC_I0_PCM_DI>,
+				 <PINMUX_GPIO125__FUNC_O_DMIC1_CLK>,
+				 <PINMUX_GPIO126__FUNC_I0_DMIC1_DAT>,
+				 <PINMUX_GPIO128__FUNC_O_DMIC2_CLK>,
+				 <PINMUX_GPIO129__FUNC_I0_DMIC2_DAT>;
+		};
+	};
+
+	disp_pwm1_pins: disp-pwm1-pins {
+		pins-pwm {
+			pinmux = <PINMUX_GPIO30__FUNC_O_DISP_PWM1>;
+		};
+	};
+
+	dptx_pins: dptx-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
+	edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO15__FUNC_B_GPIO15>;
+			output-high;
+		};
+	};
+
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>,
+				 <PINMUX_GPIO140__FUNC_I0_GBE_RXC>,
+				 <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>,
+				 <PINMUX_GPIO142__FUNC_O_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
+				 <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
+			drive-strength = <8>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>,
+				 <PINMUX_GPIO146__FUNC_B_GPIO146>;
+			output-high;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>,
+				 <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
+				 <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
+				 <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>;
+			drive-strength = <8>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>,
+				 <PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
+				 <PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
+				 <PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>,
+				 <PINMUX_GPIO140__FUNC_B_GPIO140>,
+				 <PINMUX_GPIO141__FUNC_B_GPIO141>,
+				 <PINMUX_GPIO142__FUNC_B_GPIO142>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>,
+				 <PINMUX_GPIO144__FUNC_B_GPIO144>;
+			input-disable;
+			bias-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>,
+				 <PINMUX_GPIO136__FUNC_B_GPIO136>,
+				 <PINMUX_GPIO137__FUNC_B_GPIO137>,
+				 <PINMUX_GPIO138__FUNC_B_GPIO138>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>,
+				 <PINMUX_GPIO132__FUNC_B_GPIO132>,
+				 <PINMUX_GPIO133__FUNC_B_GPIO133>,
+				 <PINMUX_GPIO134__FUNC_B_GPIO134>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	gpio_key_pins: gpio-key-pins {
+		pins {
+			pinmux = <PINMUX_GPIO42__FUNC_B1_KPCOL0>,
+				 <PINMUX_GPIO43__FUNC_B1_KPCOL1>,
+				 <PINMUX_GPIO44__FUNC_B1_KPROW0>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
+				 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
+				 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
+				 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
+				 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-insert {
+			pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
+				 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
+				 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
+				 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
+				 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_default_pins: mmc2-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
+			drive-strength = <4>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
+				 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
+				 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
+				 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
+				 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-pcm {
+			pinmux = <PINMUX_GPIO123__FUNC_O_PCM_DO>;
+		};
+	};
+
+	mmc2_uhs_pins: mmc2-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
+			drive-strength = <4>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
+				 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
+				 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
+				 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
+				 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_eint_pins: mmc2-eint-pins {
+		pins-dat1 {
+			pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_dat1_pins: mmc2-dat1-pins {
+		pins-dat1 {
+			pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	dsi0_vreg_en_pins: dsi0-vreg-en-pins {
+		pins-pwr-en {
+			pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
+			output-low;
+		};
+	};
+
+	panel_default_pins: panel-default-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>;
+			output-low;
+		};
+
+		pins-en {
+			pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>;
+			output-low;
+		};
+	};
+
+	pcie_default_pins: pcie-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
+				 <PINMUX_GPIO48__FUNC_O_PERSTN>,
+				 <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	rt1715_int_pins: rt1715-int-pins {
+		pins_cmd0_dat {
+			pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				<PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				<PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				<PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				<PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				<PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				<PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				<PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				<PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				<PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	touch_vreg_pins: touch-avdd-pins {
+		pins-power {
+			pinmux = <PINMUX_GPIO120__FUNC_B_GPIO120>;
+			output-high;
+		};
+	};
+
+	touch_pins: touch-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>;
+			output-high;
+		};
+	};
+
+	tcpci_int_pins: tcpci-int-pins {
+		pins-int-n {
+			pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>,
+				 <PINMUX_GPIO34__FUNC_I1_URXD1>;
+			bias-pull-up;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>,
+				 <PINMUX_GPIO36__FUNC_I1_URXD2>;
+			bias-pull-up;
+		};
+	};
+
+	usb_default_pins: usb-default-pins {
+		pins-iddig {
+			pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-valid {
+			pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>;
+			input-enable;
+		};
+
+		pins-vbus {
+			pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>;
+			output-high;
+		};
+
+	};
+
+	usb1_default_pins: usb1-default-pins {
+		pins-valid {
+			pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>;
+			input-enable;
+		};
+
+		pins-usb-hub-3v3-en {
+			pinmux = <PINMUX_GPIO112__FUNC_B_GPIO112>;
+			output-high;
+		};
+	};
+
+	usb2_default_pins: usb2-default-pins {
+		pins-iddig {
+			pinmux = <PINMUX_GPIO89__FUNC_B_GPIO89>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	wifi_pwrseq_pins: wifi-pwrseq-pins {
+		pins-wifi-enable {
+			pinmux = <PINMUX_GPIO127__FUNC_B_GPIO127>;
+			output-low;
+		};
+	};
+};
+
+&eth {
+	phy-mode ="rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,mac-wol;
+	snps,reset-gpio = <&pio 147 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 10000 10000>;
+	status = "okay";
+};
+
+&eth_mdio {
+	ethernet_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+	};
+};
+
+&pmic {
+	interrupt-parent = <&pio>;
+	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		home {
+			linux,keycodes = <KEY_HOME>;
+		};
+	};
+};
+
+&postmask0_in {
+	remote-endpoint = <&gamma0_out>;
+};
+
+&postmask0_out {
+	remote-endpoint = <&dither0_in>;
+};
+
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
+	memory-region = <&scp_mem>;
+	status = "okay";
+};
+
+&sound {
+	compatible = "mediatek,mt8390-mt6359-evk", "mediatek,mt8188-mt6359-evb";
+	model = "mt8390-evk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_default_pins>;
+	audio-routing =
+		"Headphone", "Headphone L",
+		"Headphone", "Headphone R",
+		"DMIC_INPUT", "AP DMIC",
+		"AP DMIC", "AUDGLB",
+		"AP DMIC", "MIC_BIAS_0",
+		"AP DMIC", "MIC_BIAS_2";
+	mediatek,adsp = <&adsp>;
+	status = "okay";
+
+	dai-link-0 {
+		link-name = "DL_SRC_BE";
+
+		codec {
+			sound-dai = <&pmic 0>;
+		};
+	};
+
+	dai-link-1 {
+		link-name = "DMIC_BE";
+
+		codec {
+			sound-dai = <&dmic_codec>;
+		};
+	};
+};
+
+&spi2 {
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&ssusb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+	usb-role-switch;
+	wakeup-source;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	pinctrl-0 = <&usb_default_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 83 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&usb_p0_vbus>;
+	};
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&ssusb1 {
+	dr_mode = "otg";
+	usb-role-switch;
+	wakeup-source;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	pinctrl-0 = <&usb1_default_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	port {
+		mtu3_hs1_role_sw: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&xhci1 {
+	status = "okay";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8025";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&usb_hub_fixed_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8027";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&usb_hub_fixed_3v3>;
+	};
+
+	port {
+		xhci_ss_ep: endpoint {
+			remote-endpoint = <&typec_con_ss>;
+		};
+	};
+};
+
+&ssusb2 {
+	/*
+	 * the ssusb2 controller is one but we got two ports : one is routed
+	 * to the M.2 slot, the other is on the RPi header who does support
+	 * full OTG.
+	 * As the controller is shared between them, the role switch default
+	 * mode is set to host to make any peripheral inserted in the M.2
+	 * slot (i.e BT/WIFI module) be detected when the other port is
+	 * unused.
+	 */
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+	role-switch-default-mode = "host";
+	usb-role-switch;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	wakeup-source;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_default_pins>;
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 89 GPIO_ACTIVE_LOW>;
+		vbus-supply = <&usb_p2_vbus>;
+	};
+};
+
+&xhci2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&sdio_fixed_3v3>; /* wifi_3v3 */
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index 70b465f7c6a7..cf8cd37f5708 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -79,9 +79,21 @@
 			reg = <0 0x54600000 0x0 0x200000>;
 		};
 
-		snd_dma_mem: memory@60000000 {
+		adsp_mem: memory@60000000 {
 			compatible = "shared-dma-pool";
-			reg = <0 0x60000000 0 0x1100000>;
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
 			no-map;
 		};
 
@@ -91,13 +103,12 @@
 		};
 	};
 
-	backlight_lcd0: backlight-lcd0 {
+	backlight_lcm0: backlight-lcm0 {
 		compatible = "pwm-backlight";
-		pwms = <&disp_pwm0 0 500000>;
-		enable-gpios = <&pio 47 GPIO_ACTIVE_HIGH>;
 		brightness-levels = <0 1023>;
-		num-interpolated-steps = <1023>;
 		default-brightness-level = <576>;
+		num-interpolated-steps = <1023>;
+		pwms = <&disp_pwm0 0 500000>;
 	};
 
 	backlight_lcd1: backlight-lcd1 {
@@ -107,6 +118,7 @@
 		brightness-levels = <0 1023>;
 		num-interpolated-steps = <1023>;
 		default-brightness-level = <576>;
+		status = "disabled";
 	};
 
 	can_clk: can-clk {
@@ -150,6 +162,24 @@
 		};
 	};
 
+	lcm0_iovcc: regulator-vio18-lcm0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio18_lcm0";
+		enable-active-high;
+		gpio = <&pio 47 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_vreg_en_pins>;
+		vin-supply = <&mt6360_ldo2>;
+	};
+
+	lcm0_vddp: regulator-vsys-lcm0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_lcm0";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&mt6360_ldo1>;
+	};
+
 	wifi_fixed_3v3: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "wifi_3v3";
@@ -161,16 +191,77 @@
 	};
 };
 
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
 &disp_pwm0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_default_pins>;
+	pinctrl-0 = <&disp_pwm0_pins>;
 	status = "okay";
 };
 
+&dither0_in {
+	remote-endpoint = <&gamma0_out>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
 &dmic_codec {
 	wakeup-delay-ms = <200>;
 };
 
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "startek,kd070fhfid078", "himax,hx8279";
+		reg = <0>;
+		backlight = <&backlight_lcm0>;
+		enable-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 108 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&lcm0_iovcc>;
+		vdd-supply = <&lcm0_vddp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+};
+
 &eth {
 	phy-mode ="rgmii-rxid";
 	phy-handle = <&eth_phy0>;
@@ -187,13 +278,22 @@
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		eth_phy0: eth-phy0@1 {
+		eth_phy0: ethernet-phy@1 {
 			compatible = "ethernet-phy-id001c.c916";
 			reg = <0x1>;
 		};
 	};
 };
 
+&gamma0_out {
+	remote-endpoint = <&dither0_in>;
+};
+
+&gpu {
+	mali-supply = <&mt6315_7_vbuck1>;
+	status = "okay";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c0_pins>;
@@ -210,8 +310,7 @@
 	touchscreen@5d {
 		compatible = "goodix,gt9271";
 		reg = <0x5d>;
-		interrupt-parent = <&pio>;
-		interrupts = <132 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
 		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
 		AVDD28-supply = <&mt6360_ldo1>;
@@ -225,6 +324,21 @@
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";
 	status = "okay";
+
+	typec-mux@48 {
+		compatible = "ite,it5205";
+		reg = <0x48>;
+		vcc-supply = <&mt6359_vibr_ldo_reg>;
+		mode-switch;
+		orientation-switch;
+		status = "okay";
+
+		port {
+			it5205_sbu_ep: endpoint {
+				remote-endpoint = <&mt6360_ssusb_sbu_ep>;
+			};
+		};
+	};
 };
 
 &i2c6 {
@@ -238,6 +352,7 @@
 	mt6360: pmic@34 {
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
+		interrupt-parent = <&pio>;
 		interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "IRQB";
 		interrupt-controller;
@@ -330,6 +445,63 @@
 				regulator-always-on;
 			};
 		};
+
+		tcpc {
+			compatible = "mediatek,mt6360-tcpc";
+			interrupts-extended = <&pio 17 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "PD_IRQB";
+
+			connector {
+				compatible = "usb-c-connector";
+				label = "USB-C";
+				data-role = "dual";
+				op-sink-microwatt = <10000000>;
+				power-role = "dual";
+				try-power-role = "sink";
+
+				source-pdos = <PDO_FIXED(5000, 1000,
+							 PDO_FIXED_DUAL_ROLE |
+							 PDO_FIXED_DATA_SWAP)>;
+				sink-pdos = <PDO_FIXED(5000, 2000,
+						       PDO_FIXED_DUAL_ROLE |
+						       PDO_FIXED_DATA_SWAP)>;
+
+				pd-revision = /bits/ 8 <0x03 0x01 0x01 0x06>;
+
+				altmodes {
+					displayport {
+						svid = /bits/ 16 <0xff01>;
+						vdo = <0x00001c46>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						typec_con_hs: endpoint {
+							remote-endpoint = <&mtu3_hs0_role_sw>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						typec_con_ss: endpoint {
+							remote-endpoint = <&mtu3_ss0_role_sw>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						mt6360_ssusb_sbu_ep: endpoint {
+							remote-endpoint = <&it5205_sbu_ep>;
+						};
+					};
+				};
+			};
+		};
 	};
 };
 
@@ -337,6 +509,14 @@
 	domain-supply = <&mt6315_7_vbuck1>;
 };
 
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
 &mmc0 {
 	status = "okay";
 	pinctrl-names = "default", "state_uhs";
@@ -407,12 +587,22 @@
 	regulator-always-on;
 };
 
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <750000>;
+};
+
 &mt6359codec {
 	mediatek,mic-type-0 = <1>; /* ACC */
 	mediatek,mic-type-1 = <3>; /* DCC */
 	mediatek,mic-type-2 = <1>; /* ACC */
 };
 
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
 &pcie0 {
 	pinctrl-names = "default", "idle";
 	pinctrl-0 = <&pcie0_default_pins>;
@@ -475,7 +665,7 @@
 				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
 				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
 				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 		};
 
 		pins-mdio {
@@ -502,7 +692,7 @@
 				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
 				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
 				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 		};
 	};
 
@@ -567,7 +757,7 @@
 			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
 				 <PINMUX_GPIO13__FUNC_SCL2>;
 			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 		};
 	};
 
@@ -582,7 +772,7 @@
 	mmc0_default_pins: mmc0-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -597,13 +787,13 @@
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -611,7 +801,7 @@
 	mmc0_uhs_pins: mmc0-uhs-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -626,19 +816,19 @@
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-ds {
 			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -646,7 +836,7 @@
 	mmc1_default_pins: mmc1-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -657,7 +847,7 @@
 				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -665,7 +855,7 @@
 	mmc1_uhs_pins: mmc1-uhs-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -676,7 +866,7 @@
 				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -690,6 +880,25 @@
 		};
 	};
 
+	dsi0_vreg_en_pins: dsi0-vreg-en-pins {
+		pins-pwr-en {
+			pinmux = <PINMUX_GPIO47__FUNC_GPIO47>;
+			output-low;
+		};
+	};
+
+	panel_default_pins: panel-default-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO108__FUNC_GPIO108>;
+			output-high;
+		};
+
+		pins-en {
+			pinmux = <PINMUX_GPIO48__FUNC_GPIO48>;
+			output-low;
+		};
+	};
+
 	pcie0_default_pins: pcie0-default-pins {
 		pins {
 			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
@@ -716,8 +925,8 @@
 		};
 	};
 
-	pwm0_default_pins: pwm0-default-pins {
-		pins-cmd-dat {
+	disp_pwm0_pins: disp-pwm0-pins {
+		pins-disp-pwm {
 			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
 		};
 	};
@@ -755,6 +964,13 @@
 		};
 	};
 
+	u3_p0_vbus: u3-p0-vbus-default-pins {
+		pins-vbus {
+			pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>;
+			input-enable;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		pins {
 			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
@@ -773,13 +989,48 @@
 };
 
 &pmic {
-	interrupt-parent = <&pio>;
-	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		home {
+			linux,keycodes = <KEY_HOME>;
+		};
+	};
 };
 
 &scp {
 	memory-region = <&scp_mem>;
+	firmware-name = "mediatek/mt8195/scp.img";
+	status = "okay";
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359";
+	model = "mt8395-evk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_default_pins>;
+	audio-routing =
+		"Headphone", "Headphone L",
+		"Headphone", "Headphone R";
+	mediatek,adsp = <&adsp>;
 	status = "okay";
+
+	headphone-dai-link {
+		link-name = "DL_SRC_BE";
+
+		codec {
+			sound-dai = <&pmic 0>;
+		};
+	};
 };
 
 &spi1 {
@@ -821,7 +1072,6 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1193750>;
@@ -838,10 +1088,9 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1193750>;
+				regulator-min-microvolt = <546000>;
+				regulator-max-microvolt = <787000>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
 			};
@@ -855,6 +1104,10 @@
 
 &u3phy1 {
 	status = "okay";
+
+	u3port1: usb-phy@700 {
+		mediatek,force-mode;
+	};
 };
 
 &u3phy2 {
@@ -881,6 +1134,56 @@
 	status = "disabled";
 };
 
+&ssusb0 {
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&u3_p0_vbus>;
+	usb-role-switch;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			mtu3_hs0_role_sw: endpoint {
+				remote-endpoint = <&typec_con_hs>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			mtu3_ss0_role_sw: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+};
+
+&ssusb2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
 &xhci0 {
 	status = "okay";
 };
@@ -891,11 +1194,9 @@
 };
 
 &xhci2 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };
 
 &xhci3 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
new file mode 100644
index 000000000000..d16f545cbbb2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
@@ -0,0 +1,1129 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2024 Kontron Europe GmbH
+ *
+ * Author: Michael Walle <mwalle@kernel.org>
+ */
+/dts-v1/;
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	model = "Kontron 3.5\"-SBC-i1200";
+	compatible = "kontron,3-5-sbc-i1200", "mediatek,mt8395", "mediatek,mt8195";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		key-0 {
+			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led-0 {
+			gpios = <&pio 107 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x0 0x80000000>;
+	};
+
+	vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		snd_dma_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0x1100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+
+	thermal_sensor0: thermal-sensor-0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <(-25000) 1474
+					    (-20000) 1374
+					    (-15000) 1260
+					    (-10000) 1134
+					     (-5000) 1004
+						   0 874
+						5000 750
+					       10000 635
+					       15000 532
+					       20000 443
+					       25000 367
+					       30000 303
+					       35000 250
+					       40000 206
+					       45000 170
+					       50000 141
+					       55000 117
+					       60000 97
+					       65000 81
+					       70000 68
+					       75000 57
+					       80000 48
+					       85000 41
+					       90000 35
+					       95000 30
+					      100000 25
+					      105000 22
+					      110000 19
+					      115000 16
+					      120000 14
+					      125000 12
+					      130000 10
+					      135000 9
+					      140000 8
+					      145000 7
+					      150000 6>;
+	};
+
+	thermal_sensor1: thermal-sensor-1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <(-25000) 1474
+					    (-20000) 1374
+					    (-15000) 1260
+					    (-10000) 1134
+					     (-5000) 1004
+						   0 874
+						5000 750
+					       10000 635
+					       15000 532
+					       20000 443
+					       25000 367
+					       30000 303
+					       35000 250
+					       40000 206
+					       45000 170
+					       50000 141
+					       55000 117
+					       60000 97
+					       65000 81
+					       70000 68
+					       75000 57
+					       80000 48
+					       85000 41
+					       90000 35
+					       95000 30
+					      100000 25
+					      105000 22
+					      110000 19
+					      115000 16
+					      120000 14
+					      125000 12
+					      130000 10
+					      135000 9
+					      140000 8
+					      145000 7
+					      150000 6>;
+	};
+
+	thermal_sensor2: thermal-sensor-2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 2>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <(-25000) 1474
+					    (-20000) 1374
+					    (-15000) 1260
+					    (-10000) 1134
+					     (-5000) 1004
+						   0 874
+						5000 750
+					       10000 635
+					       15000 532
+					       20000 443
+					       25000 367
+					       30000 303
+					       35000 250
+					       40000 206
+					       45000 170
+					       50000 141
+					       55000 117
+					       60000 97
+					       65000 81
+					       70000 68
+					       75000 57
+					       80000 48
+					       85000 41
+					       90000 35
+					       95000 30
+					      100000 25
+					      105000 22
+					      110000 19
+					      115000 16
+					      120000 14
+					      125000 12
+					      130000 10
+					      135000 9
+					      140000 8
+					      145000 7
+					      150000 6>;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&eth {
+	phy-mode ="rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,mac-wol;
+	status = "okay";
+
+	mdio {
+		ethernet_phy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <0x1>;
+			interrupts-extended = <&pio 94 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&pio 93 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&mt6315_7_vbuck1>;
+};
+
+/* CSI1/CSI2 connector */
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+/* CSI3 connector */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* LVDS bridge @f */
+};
+
+/* Touch panel connector */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+/* B2B connector */
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupt-controller;
+		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		#interrupt-cells = <1>;
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN1-supply = <&vsys>;
+			LDO_VIN2-supply = <&vsys>;
+			LDO_VIN3-supply = <&vsys>;
+
+			mt6360_buck1: buck1 {
+				regulator-name = "emi_vdd2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: buck2 {
+				regulator-name = "emi_vddq";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: ldo1 {
+				regulator-name = "mt6360_ldo1"; /* Test point */
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo2: ldo2 {
+				regulator-name = "panel1_p1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: ldo3 {
+				regulator-name = "vmc_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: ldo5 {
+				regulator-name = "vmch_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo6: ldo6 {
+				regulator-name = "mt6360_ldo6"; /* Test point */
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: ldo7 {
+				regulator-name = "emi_vmddr_en";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	hs400-ds-delay = <0x14c11>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sdio;
+	no-sd;
+	non-removable;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>, <&mmc1_detect_pins>;
+	pinctrl-1 = <&mmc1_default_pins>;
+	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-mmc;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc1_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc2_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins_default>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_pins_default>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio {
+	eth_default_pins: eth-default-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
+			output-high;
+		};
+
+		pins-interrupt {
+			pinmux = <PINMUX_GPIO94__FUNC_GPIO94>;
+			input-enable;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			input-disable;
+			bias-disable;
+		};
+	};
+
+	gpio_keys_pins: gpio-keys-pins {
+		pins {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+				 <PINMUX_GPIO9__FUNC_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+				 <PINMUX_GPIO11__FUNC_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins {
+			pinmux = <PINMUX_GPIO14__FUNC_SDA3>,
+				 <PINMUX_GPIO15__FUNC_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins {
+			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+				 <PINMUX_GPIO17__FUNC_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_detect_pins: mmc1-detect-pins {
+		pins-insert {
+			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+			bias-pull-up;
+		};
+	};
+
+	nor_pins_default: nor-default-pins {
+		pins-ck-io {
+			pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>,
+				 <PINMUX_GPIO141__FUNC_SPINOR_CK>,
+				 <PINMUX_GPIO143__FUNC_SPINOR_IO1>;
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		pins-cs {
+			pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>;
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_pins_default: pcie0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_pins_default: pcie1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO1__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO2__FUNC_WAKEN_1>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	led_pins: led-pins {
+		pins-power-en {
+			pinmux = <PINMUX_GPIO107__FUNC_GPIO107>;
+			output-high;
+		};
+	};
+
+	spi0_pins: spi0-default-pins {
+		pins-cs-mosi-clk {
+			pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>,
+				 <PINMUX_GPIO134__FUNC_SPIM0_MO>,
+				 <PINMUX_GPIO133__FUNC_SPIM0_CLK>;
+			bias-disable;
+		};
+
+		pins-miso {
+			pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>;
+			bias-pull-down;
+		};
+	};
+
+	spi1_pins: spi1-default-pins {
+		pins-cs-mosi-clk {
+			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
+				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
+				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>;
+			bias-disable;
+		};
+
+		pins-miso {
+			pinmux = <PINMUX_GPIO139__FUNC_SPIM1_MI>;
+			bias-pull-down;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO99__FUNC_URXD0>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO103__FUNC_URXD1>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>;
+		};
+
+		pins-rts {
+			pinmux = <PINMUX_GPIO100__FUNC_URTS1>;
+		};
+
+		pins-cts {
+			pinmux = <PINMUX_GPIO101__FUNC_UCTS1>;
+			input-enable;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO68__FUNC_URXD2>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO67__FUNC_UTXD2>;
+		};
+
+		pins-rts {
+			pinmux = <PINMUX_GPIO66__FUNC_URTS2>;
+		};
+
+		pins-cts {
+			pinmux = <PINMUX_GPIO65__FUNC_UCTS2>;
+			input-enable;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO5__FUNC_URXD3>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO4__FUNC_UTXD3>;
+		};
+	};
+
+	uart4_pins: uart4-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO7__FUNC_URXD4>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO6__FUNC_UTXD4>;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	memory-region = <&scp_mem>;
+	firmware-name = "mediatek/mt8195/scp.img";
+	status = "okay";
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-ramp-delay = <6250>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <625000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-ramp-delay = <6250>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/* USB3.2 front port */
+&ssusb0 {
+	dr_mode = "host";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+/* USB2.0 M.2 Key-E */
+&ssusb2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+/* USB2.0 to on-board usb hub */
+&ssusb3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	tpm: tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* B2B connector */
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&thermal_zones {
+	cpu-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&thermal_sensor0>;
+
+		trips {
+			trip-alert {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			trip-crit {
+				temperature = <95000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pcb-top-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&thermal_sensor1>;
+
+		trips {
+			trip-alert {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			trip-crit {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pcb-bottom-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&thermal_sensor2>;
+
+		trips {
+			trip-alert {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			trip-crit {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+/* USB3 */
+&u3phy0 {
+	status = "okay";
+};
+
+/* PCIe1/USB2 */
+&u3phy1 {
+	status = "okay";
+};
+
+/* USB2 */
+&u3phy2 {
+	status = "okay";
+};
+
+/* USB2 */
+&u3phy3 {
+	status = "okay";
+};
+
+/* USB3.2 front port */
+&xhci0 {
+	status = "okay";
+};
+
+/* USB2.0 M.2 Key-B */
+&xhci1 {
+	phys = <&u2port1 PHY_TYPE_USB2>;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	mediatek,u3p-dis-msk = <0x01>;
+	status = "okay";
+};
+
+/* USB2.0 M.2 Key-E */
+&xhci2 {
+	status = "okay";
+};
+
+/* USB2.0 to on-board usb hub */
+&xhci3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso
new file mode 100644
index 000000000000..0389c9cb8581
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Radxa Display 8 HD touchscreen module
+ * Copyright (C) 2025 Collabora Ltd.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&backlight {
+	status = "okay";
+};
+
+&disp_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_default_pins>;
+	status = "okay";
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "radxa,display-8hd-ad002", "jadard,jd9365da-h3";
+		reg = <0>;
+		backlight = <&backlight>;
+		vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+		vccio-supply = <&mt6360_ldo2>;
+		reset-gpios = <&pio 108 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+};
+
+&dsi0_out {
+	remote-endpoint = <&dsi_panel_in>;
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
+		VDDIO-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+	};
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
new file mode 100644
index 000000000000..d32f973f5e05
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -0,0 +1,1079 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Radxa Limited
+ * Copyright (C) 2024 Collabora Ltd.
+ *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "Radxa NIO 12L";
+	chassis-type = "embedded";
+	compatible = "radxa,nio-12l", "mediatek,mt8395", "mediatek,mt8195";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+		i2c2 = &i2c4;
+		i2c3 = &i2c0;
+		i2c4 = &i2c1;
+		ethernet0 = &eth;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x1 0x0>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		enable-gpios = <&pio 107 GPIO_ACTIVE_HIGH>;
+		num-interpolated-steps = <1023>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_backlight_pins>;
+		pwms = <&disp_pwm0 0 500000>;
+		status = "disabled";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-volume-up {
+			wakeup-source;
+			debounce-interval = <100>;
+			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	wifi_vreg: regulator-wifi-3v3-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wifi_3v3_en";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 67 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_vreg_pins>;
+		vin-supply = <&vsys>;
+	};
+
+	/* system wide switching 5.0V power rail */
+	vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_vsys>;
+	};
+
+	vsys_buck: regulator-vsys-buck {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_buck";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_vsys>;
+	};
+
+	/* Rail from power-only "TYPE C DC" port */
+	vcc5v0_vsys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			reg = <0 0x43200000 0 0xc00000>;
+			no-map;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			reg = <0 0x54600000 0x0 0x200000>;
+			no-map;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu2 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu3 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu5 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu6 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu7 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint { };
+		};
+	};
+};
+
+&eth {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&rgmii_phy>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,tx-delay-ps = <2030>;
+	mediatek,mac-wol;
+	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 20000 100000>;
+	status = "okay";
+
+	mdio {
+		rgmii_phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <0x1>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&mt6315_7_vbuck1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	typec-mux@48 {
+		compatible = "ite,it5205";
+		reg = <0x48>;
+
+		mode-switch;
+		orientation-switch;
+
+		vcc-supply = <&mt6359_vibr_ldo_reg>;
+
+		port {
+			it5205_sbu_mux: endpoint {
+				remote-endpoint = <&typec_con_mux>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* I2C4 exposed at 39-pins MIPI-LCD connector */
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		pinctrl-0 = <&mt6360_pins>;
+
+		charger {
+			compatible = "mediatek,mt6360-chg";
+			richtek,vinovp-microvolt = <14500000>;
+
+			otg_vbus_regulator: usb-otg-vbus-regulator {
+				regulator-name = "usb-otg-vbus";
+				regulator-min-microvolt = <4425000>;
+				regulator-max-microvolt = <5825000>;
+			};
+		};
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN1-supply = <&vsys_buck>;
+			LDO_VIN3-supply = <&mt6360_buck2>;
+
+			mt6360_buck1: buck1 {
+				regulator-name = "emi_vdd2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: buck2 {
+				regulator-name = "emi_vddq";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: ldo1 {
+				regulator-name = "ext_lcd_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo2: ldo2 {
+				regulator-name = "panel1_p1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: ldo3 {
+				regulator-name = "vmc_pmu";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: ldo5 {
+				regulator-name = "vmch_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo6: ldo6 {
+				regulator-name = "mt6360_ldo6"; /* Test point */
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: ldo7 {
+				regulator-name = "emi_vmddr_en";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+
+		typec {
+			compatible = "mediatek,mt6360-tcpc";
+			interrupts-extended = <&pio 100 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "PD_IRQB";
+
+			connector {
+				compatible = "usb-c-connector";
+				label = "USB-C";
+				data-role = "dual";
+				op-sink-microwatt = <10000000>;
+				power-role = "dual";
+				try-power-role = "sink";
+
+				source-pdos = <PDO_FIXED(5000, 1000,
+							 PDO_FIXED_DUAL_ROLE |
+							 PDO_FIXED_DATA_SWAP)>;
+				sink-pdos = <PDO_FIXED(5000, 3000,
+						       PDO_FIXED_DUAL_ROLE |
+						       PDO_FIXED_DATA_SWAP)>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						typec_con_hs: endpoint {
+							remote-endpoint = <&mtu3_hs0_role_sw>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						typec_con_mux: endpoint {
+							remote-endpoint = <&it5205_sbu_mux>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+/* MMC0 Controller: eMMC (HS400). Power lines are shared with UFS! */
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	hs400-ds-delay = <0x14c11>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sdio;
+	no-sd;
+	non-removable;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+/* MMC1 Controller: MicroSD card slot */
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>, <&mmc1_pins_detect>;
+	pinctrl-1 = <&mmc1_default_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+};
+
+&mt6359_vaud18_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+/* For USB Hub */
+&mt6359_vcamio_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc1_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc2_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-always-on;
+};
+
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <750000>;
+};
+
+&pio {
+	mediatek,rsel-resistance-in-si-unit;
+
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
+				 <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
+	dsi0_backlight_pins: dsi0-backlight-pins {
+		pins-backlight-en {
+			pinmux = <PINMUX_GPIO107__FUNC_GPIO107>;
+			output-high;
+		};
+	};
+
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			bias-disable;
+			input-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+	};
+
+	gpio_key_pins: gpio-keys-pins {
+		pins {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-pull-up = <1000>;
+			drive-strength = <6>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+				 <PINMUX_GPIO17__FUNC_SCL4>;
+			bias-pull-up = <1000>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-disable;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <6>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <6>;
+			input-enable;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <6>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+			input-enable;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+			input-enable;
+		};
+	};
+
+	mmc1_pins_detect: mmc1-detect-pins {
+		pins-insert {
+			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+			bias-pull-up;
+		};
+	};
+
+	mt6360_pins: mt6360-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO100__FUNC_GPIO100>,
+				 <PINMUX_GPIO101__FUNC_GPIO101>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	panel_default_pins: panel-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO108__FUNC_GPIO108>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_default_pins: pcie0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_pins: pcie1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO1__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO2__FUNC_WAKEN_1>;
+			bias-disable;
+		};
+	};
+
+	pwm0_default_pins: pwm0-pins {
+		pins-disp-pwm {
+			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
+		};
+	};
+
+	spi1_pins: spi1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
+				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
+				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
+				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
+				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
+				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
+				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
+			bias-disable;
+		};
+	};
+
+	touch_pins: touch-pins {
+		pins-touch-int {
+			pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-touch-rst {
+			pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
+			output-high;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+				 <PINMUX_GPIO99__FUNC_URXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
+				 <PINMUX_GPIO103__FUNC_URXD1>;
+		};
+	};
+
+	usb3_port0_pins: usb3p0-default-pins {
+		pins-vbus {
+			pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>;
+			input-enable;
+		};
+	};
+
+	usb2_port0_pins: usb2p0-default-pins {
+		pins-iddig {
+			pinmux = <PINMUX_GPIO130__FUNC_IDDIG_1P>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-vbus {
+			pinmux = <PINMUX_GPIO131__FUNC_USB_DRVVBUS_1P>;
+			output-low;
+		};
+	};
+
+	wifi_vreg_pins: wifi-vreg-pins {
+		pins-wifi-pmu-en {
+			pinmux = <PINMUX_GPIO65__FUNC_GPIO65>;
+			output-high;
+		};
+
+		pins-wifi-vreg-en {
+			pinmux = <PINMUX_GPIO67__FUNC_GPIO67>;
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_pins>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		home {
+			linux,keycodes = <KEY_HOME>;
+		};
+	};
+};
+
+&scp {
+	memory-region = <&scp_mem>;
+	firmware-name = "mediatek/mt8195/scp.img";
+	status = "okay";
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359";
+	model = "mt8395-evk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_default_pins>;
+	audio-routing =
+		"Headphone", "Headphone L",
+		"Headphone", "Headphone R";
+	mediatek,adsp = <&adsp>;
+	status = "okay";
+
+	headphone-dai-link {
+		link-name = "DL_SRC_BE";
+
+		codec {
+			sound-dai = <&pmic 0>;
+		};
+	};
+};
+
+&spi1 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spi2 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315_6: pmic@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315_7: pmic@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&uart0 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ufshci {
+	vcc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vccq2-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+&ufsphy {
+	status = "okay";
+};
+
+&ssusb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_port0_pins>;
+	role-switch-default-mode = "host";
+	usb-role-switch;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+
+	port {
+		mtu3_hs0_role_sw: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&ssusb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_port0_pins>;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci0 {
+	vbus-supply = <&otg_vbus_regulator>;
+	status = "okay";
+};
+
+&xhci1 {
+	phys = <&u2port1 PHY_TYPE_USB2>;
+	/* MT7921's USB Bluetooth has issues with USB2 LPM */
+	usb2-lpm-disable;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&vsys>;
+	mediatek,u3p-dis-msk = <1>;
+	status = "okay";
+};
+
+&xhci2 {
+	vbus-supply = <&vsys>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
index cce642c53812..3d3db33a64dc 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "Pumpkin MT8516";
-	compatible = "mediatek,mt8516";
+	compatible = "mediatek,mt8516-pumpkin", "mediatek,mt8516";
 
 	memory@40000000 {
 		device_type = "memory";
diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index 9cbd6dd8f671..b5e753759465 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -144,10 +144,10 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
 		bl31_secmon_reserved: secmon@43000000 {
 			no-map;
-			reg = <0 0x43000000 0 0x20000>;
+			reg = <0 0x43000000 0 0x30000>;
 		};
 	};
 
@@ -165,7 +165,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a35-pmu";
 		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
@@ -206,7 +206,7 @@
 			compatible = "mediatek,mt8516-wdt",
 				     "mediatek,mt6589-wdt";
 			reg = <0 0x10007000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
 			#reset-cells = <1>;
 		};
 
@@ -220,6 +220,17 @@
 			clock-names = "clk13m", "bus";
 		};
 
+		keypad: keypad@10002000 {
+			compatible = "mediatek,mt8516-keypad",
+				     "mediatek,mt6779-keypad";
+			reg = <0 0x10002000 0 0x1000>;
+			wakeup-source;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk26m>;
+			clock-names = "kpd";
+			status = "disabled";
+		};
+
 		syscfg_pctl: syscfg-pctl@10005000 {
 			compatible = "syscon";
 			reg = <0 0x10005000 0 0x1000>;
@@ -268,7 +279,7 @@
 			interrupt-parent = <&gic>;
 			interrupt-controller;
 			reg = <0 0x10310000 0 0x1000>,
-			      <0 0x10320000 0 0x1000>,
+			      <0 0x1032f000 0 0x2000>,
 			      <0 0x10340000 0 0x2000>,
 			      <0 0x10360000 0 0x2000>;
 			interrupts = <GIC_PPI 9
@@ -344,6 +355,7 @@
 			reg = <0 0x11009000 0 0x90>,
 			      <0 0x11000180 0 0x80>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C0>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@@ -358,6 +370,7 @@
 			reg = <0 0x1100a000 0 0x90>,
 			      <0 0x11000200 0 0x80>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C1>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@@ -372,6 +385,7 @@
 			reg = <0 0x1100b000 0 0x90>,
 			      <0 0x11000280 0 0x80>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C2>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index ec8dfb3d1c6d..805fb82138a8 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -47,7 +47,6 @@
 };
 
 &i2c0 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
@@ -156,7 +155,6 @@
 };
 
 &i2c2 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
@@ -200,8 +198,8 @@
 };
 
 &pio {
-	gpio_keys_default: gpiodefault {
-		pins_cmd_dat {
+	gpio_keys_default: gpio-keys-pins {
+		pins-cmd-dat {
 			pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>,
 				 <MT8516_PIN_43_KPCOL1__FUNC_GPIO43>;
 			bias-pull-up;
@@ -209,7 +207,7 @@
 		};
 	};
 
-	i2c0_pins_a: i2c0 {
+	i2c0_pins_a: i2c0-pins {
 		pins1 {
 			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
 				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
@@ -217,7 +215,7 @@
 		};
 	};
 
-	i2c2_pins_a: i2c2 {
+	i2c2_pins_a: i2c2-pins {
 		pins1 {
 			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
 				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
@@ -225,21 +223,21 @@
 		};
 	};
 
-	tca6416_pins: pinmux_tca6416_pins {
-		gpio_mux_rst_n_pin {
+	tca6416_pins: tca6416-pins {
+		pins-mux-rstn {
 			pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>;
 			output-high;
 		};
 
-		gpio_mux_int_n_pin {
+		pins-mux-intn {
 			pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>;
 			input-enable;
 			bias-pull-up;
 		};
 	};
 
-	ethernet_pins_default: ethernet {
-		pins_ethernet {
+	ethernet_pins_default: ethernet-pins {
+		pins-eth {
 			pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>,
 				 <MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>,
 				 <MT8516_PIN_5_EINT5__FUNC_EXT_RXER>,
diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index 24075cd91420..c3029e0abacc 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -447,7 +447,7 @@
 			pinctrl-names = "default";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x6 0x110102d4 0x24>;
+			reg = <0x6 0x110102f8 0x24>;
 		};
 
 		mdio3: mdio@61101031c {
@@ -460,7 +460,7 @@
 			reg = <0x6 0x1101031c 0x24>;
 		};
 
-		serdes: serdes@10808000 {
+		serdes: serdes@610808000 {
 			compatible = "microchip,sparx5-serdes";
 			#phy-cells = <1>;
 			clocks = <&sys_clk>;
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index f3e226de5e5e..e60acc74e822 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -13,241 +13,435 @@
 		priority = <200>;
 	};
 
+	i2c0_imux: i2c-mux-0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+
+	i2c0_emux: i2c-mux-1 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		led@0 {
+		led-0 {
 			label = "twr0:green";
 			gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>;
 		};
-		led@1 {
+		led-1 {
 			label = "twr0:yellow";
 			gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>;
 		};
-		led@2 {
+		led-2 {
 			label = "twr1:green";
 			gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>;
 		};
-		led@3 {
+		led-3 {
 			label = "twr1:yellow";
 			gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>;
 		};
-		led@4 {
+		led-4 {
 			label = "twr2:green";
 			gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>;
 		};
-		led@5 {
+		led-5 {
 			label = "twr2:yellow";
 			gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>;
 		};
-		led@6 {
+		led-6 {
 			label = "twr3:green";
 			gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>;
 		};
-		led@7 {
+		led-7 {
 			label = "twr3:yellow";
 			gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>;
 		};
-		led@8 {
+		led-8 {
 			label = "eth12:green";
 			gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@9 {
+		led-9 {
 			label = "eth12:yellow";
 			gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@10 {
+		led-10 {
 			label = "eth13:green";
 			gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@11 {
+		led-11 {
 			label = "eth13:yellow";
 			gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@12 {
+		led-12 {
 			label = "eth14:green";
 			gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@13 {
+		led-13 {
 			label = "eth14:yellow";
 			gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@14 {
+		led-14 {
 			label = "eth15:green";
 			gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@15 {
+		led-15 {
 			label = "eth15:yellow";
 			gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@16 {
+		led-16 {
 			label = "eth48:green";
 			gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@17 {
+		led-17 {
 			label = "eth48:yellow";
 			gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@18 {
+		led-18 {
 			label = "eth49:green";
 			gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@19 {
+		led-19 {
 			label = "eth49:yellow";
 			gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@20 {
+		led-20 {
 			label = "eth50:green";
 			gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@21 {
+		led-21 {
 			label = "eth50:yellow";
 			gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@22 {
+		led-22 {
 			label = "eth51:green";
 			gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@23 {
+		led-23 {
 			label = "eth51:yellow";
 			gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@24 {
+		led-24 {
 			label = "eth52:green";
 			gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@25 {
+		led-25 {
 			label = "eth52:yellow";
 			gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@26 {
+		led-26 {
 			label = "eth53:green";
 			gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@27 {
+		led-27 {
 			label = "eth53:yellow";
 			gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@28 {
+		led-28 {
 			label = "eth54:green";
 			gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@29 {
+		led-29 {
 			label = "eth54:yellow";
 			gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@30 {
+		led-30 {
 			label = "eth55:green";
 			gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@31 {
+		led-31 {
 			label = "eth55:yellow";
 			gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@32 {
+		led-32 {
 			label = "eth56:green";
 			gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@33 {
+		led-33 {
 			label = "eth56:yellow";
 			gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@34 {
+		led-34 {
 			label = "eth57:green";
 			gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@35 {
+		led-35 {
 			label = "eth57:yellow";
 			gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@36 {
+		led-36 {
 			label = "eth58:green";
 			gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@37 {
+		led-37 {
 			label = "eth58:yellow";
 			gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@38 {
+		led-38 {
 			label = "eth59:green";
 			gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@39 {
+		led-39 {
 			label = "eth59:yellow";
 			gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@40 {
+		led-40 {
 			label = "eth60:green";
 			gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@41 {
+		led-41 {
 			label = "eth60:yellow";
 			gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@42 {
+		led-42 {
 			label = "eth61:green";
 			gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@43 {
+		led-43 {
 			label = "eth61:yellow";
 			gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@44 {
+		led-44 {
 			label = "eth62:green";
 			gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@45 {
+		led-45 {
 			label = "eth62:yellow";
 			gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@46 {
+		led-46 {
 			label = "eth63:green";
 			gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@47 {
+		led-47 {
 			label = "eth63:yellow";
 			gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};
+
+	sfp_eth12: sfp-eth12 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth13: sfp-eth13 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth14: sfp-eth14 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp3>;
+		tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth15: sfp-eth15 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp4>;
+		tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth48: sfp-eth48 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp5>;
+		tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth49: sfp-eth49 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp6>;
+		tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth50: sfp-eth50 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp7>;
+		tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth51: sfp-eth51 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp8>;
+		tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth52: sfp-eth52 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp9>;
+		tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth53: sfp-eth53 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp10>;
+		tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth54: sfp-eth54 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp11>;
+		tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth55: sfp-eth55 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp12>;
+		tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth56: sfp-eth56 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp13>;
+		tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth57: sfp-eth57 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp14>;
+		tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth58: sfp-eth58 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp15>;
+		tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth59: sfp-eth59 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp16>;
+		tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth60: sfp-eth60 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp17>;
+		tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth61: sfp-eth61 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp18>;
+		tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth62: sfp-eth62 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp19>;
+		tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth63: sfp-eth63 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp20>;
+		tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &sgpio0 {
@@ -274,15 +468,6 @@
 
 &spi0 {
 	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <8000000>;
-		reg = <0>;
-	};
-};
-
-&spi0 {
-	status = "okay";
 	spi@0 {
 		compatible = "spi-mux";
 		mux-controls = <&mux>;
@@ -394,21 +579,6 @@
 	};
 };
 
-&axi {
-	i2c0_imux: i2c0-imux@0 {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-parent = <&i2c0>;
-	};
-	i2c0_emux: i2c0-emux@0 {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-parent = <&i2c0>;
-	};
-};
-
 &i2c0_imux {
 	pinctrl-names =
 		"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
@@ -427,62 +597,62 @@
 	pinctrl-10 = <&i2cmux_10>;
 	pinctrl-11 = <&i2cmux_11>;
 	pinctrl-12 = <&i2cmux_pins_i>;
-	i2c_sfp1: i2c_sfp1 {
+	i2c_sfp1: i2c@0 {
 		reg = <0x0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp2: i2c_sfp2 {
+	i2c_sfp2: i2c@1 {
 		reg = <0x1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp3: i2c_sfp3 {
+	i2c_sfp3: i2c@2 {
 		reg = <0x2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp4: i2c_sfp4 {
+	i2c_sfp4: i2c@3 {
 		reg = <0x3>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp5: i2c_sfp5 {
+	i2c_sfp5: i2c@4 {
 		reg = <0x4>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp6: i2c_sfp6 {
+	i2c_sfp6: i2c@5 {
 		reg = <0x5>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp7: i2c_sfp7 {
+	i2c_sfp7: i2c@6 {
 		reg = <0x6>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp8: i2c_sfp8 {
+	i2c_sfp8: i2c@7 {
 		reg = <0x7>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp9: i2c_sfp9 {
+	i2c_sfp9: i2c@8 {
 		reg = <0x8>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp10: i2c_sfp10 {
+	i2c_sfp10: i2c@9 {
 		reg = <0x9>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp11: i2c_sfp11 {
+	i2c_sfp11: i2c@a {
 		reg = <0xa>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp12: i2c_sfp12 {
+	i2c_sfp12: i2c@b {
 		reg = <0xb>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -495,42 +665,42 @@
 		     &gpio 61 GPIO_ACTIVE_HIGH
 		     &gpio 54 GPIO_ACTIVE_HIGH>;
 	idle-state = <0x8>;
-	i2c_sfp13: i2c_sfp13 {
+	i2c_sfp13: i2c@0 {
 		reg = <0x0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp14: i2c_sfp14 {
+	i2c_sfp14: i2c@1 {
 		reg = <0x1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp15: i2c_sfp15 {
+	i2c_sfp15: i2c@2 {
 		reg = <0x2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp16: i2c_sfp16 {
+	i2c_sfp16: i2c@3 {
 		reg = <0x3>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp17: i2c_sfp17 {
+	i2c_sfp17: i2c@4 {
 		reg = <0x4>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp18: i2c_sfp18 {
+	i2c_sfp18: i2c@5 {
 		reg = <0x5>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp19: i2c_sfp19 {
+	i2c_sfp19: i2c@6 {
 		reg = <0x6>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp20: i2c_sfp20 {
+	i2c_sfp20: i2c@7 {
 		reg = <0x7>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -544,169 +714,6 @@
 	};
 };
 
-&axi {
-	sfp_eth12: sfp-eth12 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp1>;
-		tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth13: sfp-eth13 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp2>;
-		tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth14: sfp-eth14 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp3>;
-		tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth15: sfp-eth15 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp4>;
-		tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth48: sfp-eth48 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp5>;
-		tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth49: sfp-eth49 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp6>;
-		tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth50: sfp-eth50 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp7>;
-		tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth51: sfp-eth51 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp8>;
-		tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth52: sfp-eth52 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp9>;
-		tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth53: sfp-eth53 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp10>;
-		tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth54: sfp-eth54 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp11>;
-		tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth55: sfp-eth55 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp12>;
-		tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth56: sfp-eth56 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp13>;
-		tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth57: sfp-eth57 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp14>;
-		tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth58: sfp-eth58 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp15>;
-		tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth59: sfp-eth59 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp16>;
-		tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth60: sfp-eth60 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp17>;
-		tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth61: sfp-eth61 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp18>;
-		tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth62: sfp-eth62 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp19>;
-		tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth63: sfp-eth63 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp20>;
-		tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
-	};
-};
-
 &switch {
 	ethernet-ports {
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
index 82ce007d9959..196868898f49 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -13,49 +13,96 @@
 		priority = <200>;
 	};
 
+	i2c0_imux: i2c-mux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		led@0 {
+		led-0 {
 			label = "eth60:yellow";
 			gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@1 {
+		led-1 {
 			label = "eth60:green";
 			gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@2 {
+		led-2 {
 			label = "eth61:yellow";
 			gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@3 {
+		led-3 {
 			label = "eth61:green";
 			gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@4 {
+		led-4 {
 			label = "eth62:yellow";
 			gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@5 {
+		led-5 {
 			label = "eth62:green";
 			gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@6 {
+		led-6 {
 			label = "eth63:yellow";
 			gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@7 {
+		led-7 {
 			label = "eth63:green";
 			gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 	};
+
+	sfp_eth60: sfp-eth60 {
+		compatible	 = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth61: sfp-eth61 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth62: sfp-eth62 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp3>;
+		tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth63: sfp-eth63 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp4>;
+		tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &gpio {
@@ -89,15 +136,6 @@
 
 &spi0 {
 	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <8000000>;
-		reg = <0>;
-	};
-};
-
-&spi0 {
-	status = "okay";
 	spi@0 {
 		compatible = "spi-mux";
 		mux-controls = <&mux>;
@@ -128,15 +166,6 @@
 	microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
 };
 
-&axi {
-	i2c0_imux: i2c0-imux@0 {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-parent = <&i2c0>;
-	};
-};
-
 &i2c0_imux {
 	pinctrl-names =
 		"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
@@ -146,67 +175,28 @@
 	pinctrl-2 = <&i2cmux_s31>;
 	pinctrl-3 = <&i2cmux_s32>;
 	pinctrl-4 = <&i2cmux_pins_i>;
-	i2c_sfp1: i2c_sfp1 {
+	i2c_sfp1: i2c@0 {
 		reg = <0x0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp2: i2c_sfp2 {
+	i2c_sfp2: i2c@1 {
 		reg = <0x1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp3: i2c_sfp3 {
+	i2c_sfp3: i2c@2 {
 		reg = <0x2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp4: i2c_sfp4 {
+	i2c_sfp4: i2c@3 {
 		reg = <0x3>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
 };
 
-&axi {
-	sfp_eth60: sfp-eth60 {
-		compatible	 = "sff,sfp";
-		i2c-bus = <&i2c_sfp1>;
-		tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
-		rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
-		los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth61: sfp-eth61 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp2>;
-		tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
-		rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
-		los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth62: sfp-eth62 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp3>;
-		tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
-		rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
-		los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth63: sfp-eth63 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp4>;
-		tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
-		rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
-		los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
-	};
-};
-
 &mdio0 {
 	status = "okay";
 	phy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
index 32bb76b3202a..83bf5c81b5f7 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
@@ -12,10 +12,12 @@
 
 &cpu0 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu1 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &uart0 {
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
index b89e2be6abae..9482bec1aa57 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
@@ -14,6 +14,10 @@
 
 	aliases {
 		serial0 = &uart0;
+		serial10 = &uart10;
+		serial12 = &uart12;
+		serial13 = &uart13;
+		serial14 = &uart14;
 	};
 
 	chosen {
@@ -33,10 +37,6 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
-};
-
 &clk {
 	assigned-clocks = <&clk CAPLL>,
 			  <&clk DDRPLL>,
@@ -54,3 +54,75 @@
 			   "integer",
 			   "integer";
 };
+
+&pinctrl {
+	uart-grp {
+		pinctrl_uart0: uart0-pins {
+			nuvoton,pins = <4 14 1>,
+				       <4 15 1>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart10: uart10-pins {
+			nuvoton,pins = <7 4 2>,
+				       <7 5 2>,
+				       <7 6 2>,
+				       <7 7 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart12: uart12-pins {
+			nuvoton,pins = <2 13 2>,
+				       <2 14 2>,
+				       <2 15 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart13: uart13-pins {
+			nuvoton,pins = <7 12 3>,
+				       <7 13 3>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart14: uart14-pins {
+			nuvoton,pins = <7 14 2>,
+				       <7 15 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart10 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart10>;
+	status = "okay";
+};
+
+&uart12 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart12>;
+	status = "okay";
+};
+
+&uart13 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart13>;
+	status = "okay";
+};
+
+&uart14 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart14>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
index a1ebddecb7f8..f6f20a17e501 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -14,6 +14,10 @@
 
 	aliases {
 		serial0 = &uart0;
+		serial11 = &uart11;
+		serial12 = &uart12;
+		serial14 = &uart14;
+		serial16 = &uart16;
 	};
 
 	chosen {
@@ -33,10 +37,6 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
-};
-
 &clk {
 	assigned-clocks = <&clk CAPLL>,
 			  <&clk DDRPLL>,
@@ -54,3 +54,78 @@
 			   "integer",
 			   "integer";
 };
+
+&pinctrl {
+	uart-grp {
+		pinctrl_uart0: uart0-pins {
+			nuvoton,pins = <4 14 1>,
+				       <4 15 1>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart11: uart11-pins {
+			nuvoton,pins = <11 0 2>,
+				       <11 1 2>,
+				       <11 2 2>,
+				       <11 3 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart12: uart12-pins {
+			nuvoton,pins = <8 1 2>,
+				       <8 2 2>,
+				       <8 3 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart14: uart14-pins {
+			nuvoton,pins = <8 5 2>,
+				       <8 6 2>,
+				       <8 7 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart16: uart16-pins {
+			nuvoton,pins = <10 0 2>,
+				       <10 1 2>,
+				       <10 2 2>,
+				       <10 3 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart11 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart11>;
+	status = "okay";
+};
+
+&uart12 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart12>;
+	status = "okay";
+};
+
+&uart14 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart14>;
+	status = "okay";
+};
+
+&uart16 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart16>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
index 781cdae566a0..e51b98f5bdce 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -83,7 +83,7 @@
 		ranges;
 
 		sys: system-management@40460000 {
-			compatible = "nuvoton,ma35d1-reset";
+			compatible = "nuvoton,ma35d1-reset", "syscon";
 			reg = <0x0 0x40460000 0x0 0x200>;
 			#reset-cells = <1>;
 		};
@@ -95,6 +95,155 @@
 			clocks = <&clk_hxt>;
 		};
 
+		pinctrl: pinctrl@40040000 {
+			compatible = "nuvoton,ma35d1-pinctrl";
+			reg = <0x0 0x40040000 0x0 0xc00>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			nuvoton,sys = <&sys>;
+			ranges = <0x0 0x0 0x40040000 0x400>;
+
+			gpioa: gpio@0 {
+				reg = <0x0 0x40>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPA_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiob: gpio@40 {
+				reg = <0x40 0x40>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPB_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioc: gpio@80 {
+				reg = <0x80 0x40>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPC_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiod: gpio@c0 {
+				reg = <0xc0 0x40>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPD_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioe: gpio@100 {
+				reg = <0x100 0x40>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPE_GATE>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiof: gpio@140 {
+				reg = <0x140 0x40>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPF_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiog: gpio@180 {
+				reg = <0x180 0x40>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPG_GATE>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioh: gpio@1c0 {
+				reg = <0x1c0 0x40>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPH_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioi: gpio@200 {
+				reg = <0x200 0x40>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPI_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioj: gpio@240 {
+				reg = <0x240 0x40>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPJ_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiok: gpio@280 {
+				reg = <0x280 0x40>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPK_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiol: gpio@2c0 {
+				reg = <0x2c0 0x40>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPL_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiom: gpio@300 {
+				reg = <0x300 0x40>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPM_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpion: gpio@340 {
+				reg = <0x340 0x40>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPN_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
 		uart0: serial@40700000 {
 			compatible = "nuvoton,ma35d1-uart";
 			reg = <0x0 0x40700000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
index ecd171b2feba..24133528b8e9 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
@@ -32,11 +32,6 @@
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#address-cells = <0>;
-			ppi-partitions {
-				ppi_cluster0: interrupt-partition-0 {
-					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
-				};
-			};
 		};
 	};
 
@@ -47,17 +42,13 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
-		rstc: reset-controller@f0801000 {
+		clk: rstc: reset-controller@f0801000 {
 			compatible = "nuvoton,npcm845-reset";
-			reg = <0x0 0xf0801000 0x0 0x78>;
-			#reset-cells = <2>;
+			reg = <0x0 0xf0801000 0x0 0xC4>;
 			nuvoton,sysgcr = <&gcr>;
-		};
-
-		clk: clock-controller@f0801000 {
-			compatible = "nuvoton,npcm845-clk";
+			#reset-cells = <2>;
+			clocks = <&refclk>;
 			#clock-cells = <1>;
-			reg = <0x0 0xf0801000 0x0 0x1000>;
 		};
 
 		apb {
@@ -81,7 +72,7 @@
 				compatible = "nuvoton,npcm845-timer";
 				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x8000 0x1C>;
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				clock-names = "refclk";
 			};
 
@@ -153,7 +144,7 @@
 				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x801c 0x4>;
 				status = "disabled";
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				syscon = <&gcr>;
 			};
 
@@ -162,7 +153,7 @@
 				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x901c 0x4>;
 				status = "disabled";
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				syscon = <&gcr>;
 			};
 
@@ -171,9 +162,723 @@
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xa01c 0x4>;
 				status = "disabled";
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				syscon = <&gcr>;
 			};
 		};
 	};
+
+	pinctrl: pinctrl@f0010000 {
+		compatible = "nuvoton,npcm845-pinctrl";
+		ranges = <0x0 0x0 0xf0010000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nuvoton,sysgcr = <&gcr>;
+		status = "okay";
+		gpio0: gpio@f0010000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x0 0xB0>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+		};
+		gpio1: gpio@f0011000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x1000 0xB0>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 32 32>;
+		};
+		gpio2: gpio@f0012000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x2000 0xB0>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 64 32>;
+		};
+		gpio3: gpio@f0013000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x3000 0xB0>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 96 32>;
+		};
+		gpio4: gpio@f0014000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x4000 0xB0>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 128 32>;
+		};
+		gpio5: gpio@f0015000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x5000 0xB0>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 160 32>;
+		};
+		gpio6: gpio@f0016000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x6000 0xB0>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 192 32>;
+		};
+		gpio7: gpio@f0017000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x7000 0xB0>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 224 32>;
+		};
+
+		iox1_pins: iox1-mux {
+			groups = "iox1";
+			function = "iox1";
+		};
+		iox2_pins: iox2-mux {
+			groups = "iox2";
+			function = "iox2";
+		};
+		smb1d_pins: smb1d-mux {
+			groups = "smb1d";
+			function = "smb1d";
+		};
+		smb2d_pins: smb2d-mux {
+			groups = "smb2d";
+			function = "smb2d";
+		};
+		lkgpo1_pins: lkgpo1-mux {
+			groups = "lkgpo1";
+			function = "lkgpo1";
+		};
+		lkgpo2_pins: lkgpo2-mux {
+			groups = "lkgpo2";
+			function = "lkgpo2";
+		};
+		ioxh_pins: ioxh-mux {
+			groups = "ioxh";
+			function = "ioxh";
+		};
+		gspi_pins: gspi-mux {
+			groups = "gspi";
+			function = "gspi";
+		};
+		smb5b_pins: smb5b-mux {
+			groups = "smb5b";
+			function = "smb5b";
+		};
+		smb5c_pins: smb5c-mux {
+			groups = "smb5c";
+			function = "smb5c";
+		};
+		lkgpo0_pins: lkgpo0-mux {
+			groups = "lkgpo0";
+			function = "lkgpo0";
+		};
+		pspi_pins: pspi-mux {
+			groups = "pspi";
+			function = "pspi";
+		};
+		jm1_pins: jm1-mux {
+			groups = "jm1";
+			function = "jm1";
+		};
+		jm2_pins: jm2-mux {
+			groups = "jm2";
+			function = "jm2";
+		};
+		smb4b_pins: smb4b-mux {
+			groups = "smb4b";
+			function = "smb4b";
+		};
+		smb4c_pins: smb4c-mux {
+			groups = "smb4c";
+			function = "smb4c";
+		};
+		smb15_pins: smb15-mux {
+			groups = "smb15";
+			function = "smb15";
+		};
+		smb16_pins: smb16-mux {
+			groups = "smb16";
+			function = "smb16";
+		};
+		smb17_pins: smb17-mux {
+			groups = "smb17";
+			function = "smb17";
+		};
+		smb18_pins: smb18-mux {
+			groups = "smb18";
+			function = "smb18";
+		};
+		smb19_pins: smb19-mux {
+			groups = "smb19";
+			function = "smb19";
+		};
+		smb20_pins: smb20-mux {
+			groups = "smb20";
+			function = "smb20";
+		};
+		smb21_pins: smb21-mux {
+			groups = "smb21";
+			function = "smb21";
+		};
+		smb22_pins: smb22-mux {
+			groups = "smb22";
+			function = "smb22";
+		};
+		smb23_pins: smb23-mux {
+			groups = "smb23";
+			function = "smb23";
+		};
+		smb23b_pins: smb23b-mux {
+			groups = "smb23b";
+			function = "smb23b";
+		};
+		smb4d_pins: smb4d-mux {
+			groups = "smb4d";
+			function = "smb4d";
+		};
+		smb14_pins: smb14-mux {
+			groups = "smb14";
+			function = "smb14";
+		};
+		smb5_pins: smb5-mux {
+			groups = "smb5";
+			function = "smb5";
+		};
+		smb4_pins: smb4-mux {
+			groups = "smb4";
+			function = "smb4";
+		};
+		smb3_pins: smb3-mux {
+			groups = "smb3";
+			function = "smb3";
+		};
+		spi0cs1_pins: spi0cs1-mux {
+			groups = "spi0cs1";
+			function = "spi0cs1";
+		};
+		spi1cs0_pins: spi1cs0-mux {
+			groups = "spi1cs0";
+			function = "spi1cs0";
+		};
+		spi1cs1_pins: spi1cs1-mux {
+			groups = "spi1cs1";
+			function = "spi1cs1";
+		};
+		spi1cs2_pins: spi1cs2-mux {
+			groups = "spi1cs2";
+			function = "spi1cs2";
+		};
+		spi1cs3_pins: spi1cs3-mux {
+			groups = "spi1cs3";
+			function = "spi1cs3";
+		};
+		smb3c_pins: smb3c-mux {
+			groups = "smb3c";
+			function = "smb3c";
+		};
+		smb3b_pins: smb3b-mux {
+			groups = "smb3b";
+			function = "smb3b";
+		};
+		bmcuart0a_pins: bmcuart0a-mux {
+			groups = "bmcuart0a";
+			function = "bmcuart0a";
+		};
+		uart1_pins: uart1-mux {
+			groups = "uart1";
+			function = "uart1";
+		};
+		jtag2_pins: jtag2-mux {
+			groups = "jtag2";
+			function = "jtag2";
+		};
+		bmcuart1_pins: bmcuart1-mux {
+			groups = "bmcuart1";
+			function = "bmcuart1";
+		};
+		uart2_pins: uart2-mux {
+			groups = "uart2";
+			function = "uart2";
+		};
+		bmcuart0b_pins: bmcuart0b-mux {
+			groups = "bmcuart0b";
+			function = "bmcuart0b";
+		};
+		r1err_pins: r1err-mux {
+			groups = "r1err";
+			function = "r1err";
+		};
+		r1md_pins: r1md-mux {
+			groups = "r1md";
+			function = "r1md";
+		};
+		r1oen_pins: r1oen-mux {
+			groups = "r1oen";
+			function = "r1oen";
+		};
+		r2oen_pins: r2oen-mux {
+			groups = "r2oen";
+			function = "r2oen";
+		};
+		rmii3_pins: rmii3-mux {
+			groups = "rmii3";
+			function = "rmii3";
+		};
+		r3oen_pins: r3oen-mux {
+			groups = "r3oen";
+			function = "r3oen";
+		};
+		smb3d_pins: smb3d-mux {
+			groups = "smb3d";
+			function = "smb3d";
+		};
+		fanin0_pins: fanin0-mux {
+			groups = "fanin0";
+			function = "fanin0";
+		};
+		fanin1_pins: fanin1-mux {
+			groups = "fanin1";
+			function = "fanin1";
+		};
+		fanin2_pins: fanin2-mux {
+			groups = "fanin2";
+			function = "fanin2";
+		};
+		fanin3_pins: fanin3-mux {
+			groups = "fanin3";
+			function = "fanin3";
+		};
+		fanin4_pins: fanin4-mux {
+			groups = "fanin4";
+			function = "fanin4";
+		};
+		fanin5_pins: fanin5-mux {
+			groups = "fanin5";
+			function = "fanin5";
+		};
+		fanin6_pins: fanin6-mux {
+			groups = "fanin6";
+			function = "fanin6";
+		};
+		fanin7_pins: fanin7-mux {
+			groups = "fanin7";
+			function = "fanin7";
+		};
+		fanin8_pins: fanin8-mux {
+			groups = "fanin8";
+			function = "fanin8";
+		};
+		fanin9_pins: fanin9-mux {
+			groups = "fanin9";
+			function = "fanin9";
+		};
+		fanin10_pins: fanin10-mux {
+			groups = "fanin10";
+			function = "fanin10";
+		};
+		fanin11_pins: fanin11-mux {
+			groups = "fanin11";
+			function = "fanin11";
+		};
+		fanin12_pins: fanin12-mux {
+			groups = "fanin12";
+			function = "fanin12";
+		};
+		fanin13_pins: fanin13-mux {
+			groups = "fanin13";
+			function = "fanin13";
+		};
+		fanin14_pins: fanin14-mux {
+			groups = "fanin14";
+			function = "fanin14";
+		};
+		fanin15_pins: fanin15-mux {
+			groups = "fanin15";
+			function = "fanin15";
+		};
+		pwm0_pins: pwm0-mux {
+			groups = "pwm0";
+			function = "pwm0";
+		};
+		pwm1_pins: pwm1-mux {
+			groups = "pwm1";
+			function = "pwm1";
+		};
+		pwm2_pins: pwm2-mux {
+			groups = "pwm2";
+			function = "pwm2";
+		};
+		pwm3_pins: pwm3-mux {
+			groups = "pwm3";
+			function = "pwm3";
+		};
+		r2_pins: r2-mux {
+			groups = "r2";
+			function = "r2";
+		};
+		r2err_pins: r2err-mux {
+			groups = "r2err";
+			function = "r2err";
+		};
+		r2md_pins: r2md-mux {
+			groups = "r2md";
+			function = "r2md";
+		};
+		r3rxer_pins: r3rxer-mux {
+			groups = "r3rxer";
+			function = "r3rxer";
+		};
+		ga20kbc_pins: ga20kbc-mux {
+			groups = "ga20kbc";
+			function = "ga20kbc";
+		};
+		smb5d_pins: smb5d-mux {
+			groups = "smb5d";
+			function = "smb5d";
+		};
+		lpc_pins: lpc-mux {
+			groups = "lpc";
+			function = "lpc";
+		};
+		espi_pins: espi-mux {
+			groups = "espi";
+			function = "espi";
+		};
+		sg1mdio_pins: sg1mdio-mux {
+			groups = "sg1mdio";
+			function = "sg1mdio";
+		};
+		rg2_pins: rg2-mux {
+			groups = "rg2";
+			function = "rg2";
+		};
+		ddr_pins: ddr-mux {
+			groups = "ddr";
+			function = "ddr";
+		};
+		i3c0_pins: i3c0-mux {
+			groups = "i3c0";
+			function = "i3c0";
+		};
+		i3c1_pins: i3c1-mux {
+			groups = "i3c1";
+			function = "i3c1";
+		};
+		i3c2_pins: i3c2-mux {
+			groups = "i3c2";
+			function = "i3c2";
+		};
+		i3c3_pins: i3c3-mux {
+			groups = "i3c3";
+			function = "i3c3";
+		};
+		i3c4_pins: i3c4-mux {
+			groups = "i3c4";
+			function = "i3c4";
+		};
+		i3c5_pins: i3c5-mux {
+			groups = "i3c5";
+			function = "i3c5";
+		};
+		smb0_pins: smb0-mux {
+			groups = "smb0";
+			function = "smb0";
+		};
+		smb1_pins: smb1-mux {
+			groups = "smb1";
+			function = "smb1";
+		};
+		smb2_pins: smb2-mux {
+			groups = "smb2";
+			function = "smb2";
+		};
+		smb2c_pins: smb2c-mux {
+			groups = "smb2c";
+			function = "smb2c";
+		};
+		smb2b_pins: smb2b-mux {
+			groups = "smb2b";
+			function = "smb2b";
+		};
+		smb1c_pins: smb1c-mux {
+			groups = "smb1c";
+			function = "smb1c";
+		};
+		smb1b_pins: smb1b-mux {
+			groups = "smb1b";
+			function = "smb1b";
+		};
+		smb8_pins: smb8-mux {
+			groups = "smb8";
+			function = "smb8";
+		};
+		smb9_pins: smb9-mux {
+			groups = "smb9";
+			function = "smb9";
+		};
+		smb10_pins: smb10-mux {
+			groups = "smb10";
+			function = "smb10";
+		};
+		smb11_pins: smb11-mux {
+			groups = "smb11";
+			function = "smb11";
+		};
+		sd1_pins: sd1-mux {
+			groups = "sd1";
+			function = "sd1";
+		};
+		sd1pwr_pins: sd1pwr-mux {
+			groups = "sd1pwr";
+			function = "sd1pwr";
+		};
+		pwm4_pins: pwm4-mux {
+			groups = "pwm4";
+			function = "pwm4";
+		};
+		pwm5_pins: pwm5-mux {
+			groups = "pwm5";
+			function = "pwm5";
+		};
+		pwm6_pins: pwm6-mux {
+			groups = "pwm6";
+			function = "pwm6";
+		};
+		pwm7_pins: pwm7-mux {
+			groups = "pwm7";
+			function = "pwm7";
+		};
+		pwm8_pins: pwm8-mux {
+			groups = "pwm8";
+			function = "pwm8";
+		};
+		pwm9_pins: pwm9-mux {
+			groups = "pwm9";
+			function = "pwm9";
+		};
+		pwm10_pins: pwm10-mux {
+			groups = "pwm10";
+			function = "pwm10";
+		};
+		pwm11_pins: pwm11-mux {
+			groups = "pwm11";
+			function = "pwm11";
+		};
+		mmc8_pins: mmc8-mux {
+			groups = "mmc8";
+			function = "mmc8";
+		};
+		mmc_pins: mmc-mux {
+			groups = "mmc";
+			function = "mmc";
+		};
+		mmcwp_pins: mmcwp-mux {
+			groups = "mmcwp";
+			function = "mmcwp";
+		};
+		mmccd_pins: mmccd-mux {
+			groups = "mmccd";
+			function = "mmccd";
+		};
+		mmcrst_pins: mmcrst-mux {
+			groups = "mmcrst";
+			function = "mmcrst";
+		};
+		clkout_pins: clkout-mux {
+			groups = "clkout";
+			function = "clkout";
+		};
+		serirq_pins: serirq-mux {
+			groups = "serirq";
+			function = "serirq";
+		};
+		scipme_pins: scipme-mux {
+			groups = "scipme";
+			function = "scipme";
+		};
+		smb6_pins: smb6-mux {
+			groups = "smb6";
+			function = "smb6";
+		};
+		smb6b_pins: smb6b-mux {
+			groups = "smb6b";
+			function = "smb6b";
+		};
+		smb6c_pins: smb6c-mux {
+			groups = "smb6c";
+			function = "smb6c";
+		};
+		smb6d_pins: smb6d-mux {
+			groups = "smb6d";
+			function = "smb6d";
+		};
+		smb7_pins: smb7-mux {
+			groups = "smb7";
+			function = "smb7";
+		};
+		smb7b_pins: smb7b-mux {
+			groups = "smb7b";
+			function = "smb7b";
+		};
+		smb7c_pins: smb7c-mux {
+			groups = "smb7c";
+			function = "smb7c";
+		};
+		smb7d_pins: smb7d-mux {
+			groups = "smb7d";
+			function = "smb7d";
+		};
+		spi1_pins: spi1-mux {
+			groups = "spi1";
+			function = "spi1";
+		};
+		faninx_pins: faninx-mux {
+			groups = "faninx";
+			function = "faninx";
+		};
+		r1_pins: r1-mux {
+			groups = "r1";
+			function = "r1";
+		};
+		spi3_pins: spi3-mux {
+			groups = "spi3";
+			function = "spi3";
+		};
+		spi3cs1_pins: spi3cs1-mux {
+			groups = "spi3cs1";
+			function = "spi3cs1";
+		};
+		spi3quad_pins: spi3quad-mux {
+			groups = "spi3quad";
+			function = "spi3quad";
+		};
+		spi3cs2_pins: spi3cs2-mux {
+			groups = "spi3cs2";
+			function = "spi3cs2";
+		};
+		spi3cs3_pins: spi3cs3-mux {
+			groups = "spi3cs3";
+			function = "spi3cs3";
+		};
+		nprd_smi_pins: nprd-smi-mux {
+			groups = "nprd_smi";
+			function = "nprd_smi";
+		};
+		smi_pins: smi-mux {
+			groups = "smi";
+			function = "smi";
+		};
+		smb0b_pins: smb0b-mux {
+			groups = "smb0b";
+			function = "smb0b";
+		};
+		smb0c_pins: smb0c-mux {
+			groups = "smb0c";
+			function = "smb0c";
+		};
+		smb0den_pins: smb0den-mux {
+			groups = "smb0den";
+			function = "smb0den";
+		};
+		smb0d_pins: smb0d-mux {
+			groups = "smb0d";
+			function = "smb0d";
+		};
+		ddc_pins: ddc-mux {
+			groups = "ddc";
+			function = "ddc";
+		};
+		rg2mdio_pins: rg2mdio-mux {
+			groups = "rg2mdio";
+			function = "rg2mdio";
+		};
+		wdog1_pins: wdog1-mux {
+			groups = "wdog1";
+			function = "wdog1";
+		};
+		wdog2_pins: wdog2-mux {
+			groups = "wdog2";
+			function = "wdog2";
+		};
+		smb12_pins: smb12-mux {
+			groups = "smb12";
+			function = "smb12";
+		};
+		smb13_pins: smb13-mux {
+			groups = "smb13";
+			function = "smb13";
+		};
+		spix_pins: spix-mux {
+			groups = "spix";
+			function = "spix";
+		};
+		spixcs1_pins: spixcs1-mux {
+			groups = "spixcs1";
+			function = "spixcs1";
+		};
+		clkreq_pins: clkreq-mux {
+			groups = "clkreq";
+			function = "clkreq";
+		};
+		hgpio0_pins: hgpio0-mux {
+			groups = "hgpio0";
+			function = "hgpio0";
+		};
+		hgpio1_pins: hgpio1-mux {
+			groups = "hgpio1";
+			function = "hgpio1";
+		};
+		hgpio2_pins: hgpio2-mux {
+			groups = "hgpio2";
+			function = "hgpio2";
+		};
+		hgpio3_pins: hgpio3-mux {
+			groups = "hgpio3";
+			function = "hgpio3";
+		};
+		hgpio4_pins: hgpio4-mux {
+			groups = "hgpio4";
+			function = "hgpio4";
+		};
+		hgpio5_pins: hgpio5-mux {
+			groups = "hgpio5";
+			function = "hgpio5";
+		};
+		hgpio6_pins: hgpio6-mux {
+			groups = "hgpio6";
+			function = "hgpio6";
+		};
+		hgpio7_pins: hgpio7-mux {
+			groups = "hgpio7";
+			function = "hgpio7";
+		};
+		bu4_pins: bu4-mux {
+			groups = "bu4";
+			function = "bu4";
+		};
+		bu4b_pins: bu4b-mux {
+			groups = "bu4b";
+			function = "bu4b";
+		};
+		bu5_pins: bu5-mux {
+			groups = "bu5";
+			function = "bu5";
+		};
+		bu5b_pins: bu5b-mux {
+			groups = "bu5b";
+			function = "bu5b";
+		};
+		bu6_pins: bu6-mux {
+			groups = "bu6";
+			function = "bu6";
+		};
+		gpo187_pins: gpo187-mux {
+			groups = "gpo187";
+			function = "gpo187";
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
index a5ab2bc0f835..2638ee1c3846 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
@@ -16,9 +16,15 @@
 		stdout-path = &serial0;
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
+
+	refclk: refclk-25mhz {
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+		#clock-cells = <0>;
+	};
 };
 
 &serial0 {
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index c38c809fe577..171e08c94d5a 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -12,6 +12,7 @@ DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@
 DTC_FLAGS_tegra234-p3740-0002+p3701-0008 := -@
 DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@
 DTC_FLAGS_tegra234-p3768-0000+p3767-0005 := -@
+DTC_FLAGS_tegra264-p3971-0089+p3834-0008 := -@
 
 dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
@@ -27,6 +28,8 @@ dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0008.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3740-0002+p3701-0008.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0005.dtb
+dtb-$(CONFIG_ARCH_TEGRA_264_SOC) += tegra264-p3971-0089+p3834-0008.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
index bbc2e9bef08d..683ac124523b 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -9,8 +9,8 @@
 	compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@7000d000/as3722@40";
-		rtc1 = "/rtc@7000e000";
+		rtc0 = &as3722;
+		rtc1 = &tegra_rtc;
 		serial0 = &uarta;
 	};
 
@@ -762,6 +762,7 @@
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
 			reg = <0>;
+			wakeup-source;
 
 			google,cros-ec-spi-msg-delay = <2000>;
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 7e24a212c7e4..5bcccfef3f7f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -572,7 +572,7 @@
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
+	tegra_rtc: rtc@7000e000 {
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
 		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 15aa49fc4503..8b3736cee323 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -2394,6 +2394,12 @@
 		phy-names = "usb2-0";
 	};
 
+	cec@3960000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	i2c@c250000 {
 		/* carrier board ID EEPROM */
 		eeprom@57 {
@@ -2409,6 +2415,10 @@
 		};
 	};
 
+	pwm@c340000 {
+		status = "okay";
+	};
+
 	pcie@10003000 {
 		status = "okay";
 
@@ -2508,6 +2518,16 @@
 		};
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm4 0 45334>;
+		fan-supply = <&vdd_fan>;
+
+		/* cooling level (0, 1, 2, 3) - pwm inverted */
+		cooling-levels = <255 128 64 0>;
+		#cooling-cells = <2>;
+	};
+
 	vdd_sd: regulator-vdd-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "SD_CARD_SW_PWR";
@@ -2556,6 +2576,17 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
+	vdd_fan: regulator-vdd-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_FAN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&exp1 4 GPIO_ACTIVE_LOW>;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
 	sound {
 		compatible = "nvidia,tegra186-audio-graph-card";
 		status = "okay";
@@ -2621,4 +2652,88 @@
 
 		label = "NVIDIA Jetson TX2 APE";
 	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <79000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <62000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <45000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				map1 {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				map2 {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				map3 {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+
+		aux-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				aux_alert0: critical {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				gpu_alert0: critical {
+					temperature = <99000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index e2d6857a3709..970ce5a03540 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -61,6 +61,8 @@
 	};
 
 	serial@3100000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -191,6 +193,10 @@
 		nvidia,invert-interrupt;
 	};
 
+	gpu@17000000 {
+		status = "okay";
+	};
+
 	bpmp {
 		i2c {
 			status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
index 26f71651933d..5f3f572ecea9 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
@@ -549,6 +549,8 @@
 	};
 
 	serial@3100000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -712,6 +714,12 @@
 		phy-names = "usb2-0";
 	};
 
+	cec@3960000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	hsp@3c00000 {
 		status = "okay";
 	};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 2b3bb5d0af17..5778c93af3e6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -124,28 +124,28 @@
 			 <&bpmp TEGRA186_CLK_APB2APE>;
 		clock-names = "ape", "apb2ape";
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_AUD>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x02900000 0x0 0x02900000 0x200000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x02900000 0x0 0x02900000 0x0 0x200000>;
 		status = "disabled";
 
 		tegra_ahub: ahub@2900800 {
 			compatible = "nvidia,tegra186-ahub";
-			reg = <0x02900800 0x800>;
+			reg = <0x0 0x02900800 0x0 0x800>;
 			clocks = <&bpmp TEGRA186_CLK_AHUB>;
 			clock-names = "ahub";
 			assigned-clocks = <&bpmp TEGRA186_CLK_AHUB>;
 			assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>;
 			assigned-clock-rates = <81600000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x02900800 0x02900800 0x11800>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x02900800 0x0 0x02900800 0x0 0x11800>;
 			status = "disabled";
 
 			tegra_i2s1: i2s@2901000 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901000 0x100>;
+				reg = <0x0 0x2901000 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S1>,
 					 <&bpmp TEGRA186_CLK_I2S1_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -159,7 +159,7 @@
 			tegra_i2s2: i2s@2901100 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901100 0x100>;
+				reg = <0x0 0x2901100 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S2>,
 					 <&bpmp TEGRA186_CLK_I2S2_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -173,7 +173,7 @@
 			tegra_i2s3: i2s@2901200 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901200 0x100>;
+				reg = <0x0 0x2901200 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S3>,
 					 <&bpmp TEGRA186_CLK_I2S3_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -187,7 +187,7 @@
 			tegra_i2s4: i2s@2901300 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901300 0x100>;
+				reg = <0x0 0x2901300 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S4>,
 					 <&bpmp TEGRA186_CLK_I2S4_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -201,7 +201,7 @@
 			tegra_i2s5: i2s@2901400 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901400 0x100>;
+				reg = <0x0 0x2901400 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S5>,
 					 <&bpmp TEGRA186_CLK_I2S5_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -215,7 +215,7 @@
 			tegra_i2s6: i2s@2901500 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901500 0x100>;
+				reg = <0x0 0x2901500 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S6>,
 					 <&bpmp TEGRA186_CLK_I2S6_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -229,7 +229,7 @@
 			tegra_sfc1: sfc@2902000 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902000 0x200>;
+				reg = <0x0 0x2902000 0x0 0x200>;
 				sound-name-prefix = "SFC1";
 				status = "disabled";
 			};
@@ -237,7 +237,7 @@
 			tegra_sfc2: sfc@2902200 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902200 0x200>;
+				reg = <0x0 0x2902200 0x0 0x200>;
 				sound-name-prefix = "SFC2";
 				status = "disabled";
 			};
@@ -245,7 +245,7 @@
 			tegra_sfc3: sfc@2902400 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902400 0x200>;
+				reg = <0x0 0x2902400 0x0 0x200>;
 				sound-name-prefix = "SFC3";
 				status = "disabled";
 			};
@@ -253,7 +253,7 @@
 			tegra_sfc4: sfc@2902600 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902600 0x200>;
+				reg = <0x0 0x2902600 0x0 0x200>;
 				sound-name-prefix = "SFC4";
 				status = "disabled";
 			};
@@ -261,7 +261,7 @@
 			tegra_amx1: amx@2903000 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903000 0x100>;
+				reg = <0x0 0x2903000 0x0 0x100>;
 				sound-name-prefix = "AMX1";
 				status = "disabled";
 			};
@@ -269,7 +269,7 @@
 			tegra_amx2: amx@2903100 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903100 0x100>;
+				reg = <0x0 0x2903100 0x0 0x100>;
 				sound-name-prefix = "AMX2";
 				status = "disabled";
 			};
@@ -277,7 +277,7 @@
 			tegra_amx3: amx@2903200 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903200 0x100>;
+				reg = <0x0 0x2903200 0x0 0x100>;
 				sound-name-prefix = "AMX3";
 				status = "disabled";
 			};
@@ -285,7 +285,7 @@
 			tegra_amx4: amx@2903300 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903300 0x100>;
+				reg = <0x0 0x2903300 0x0 0x100>;
 				sound-name-prefix = "AMX4";
 				status = "disabled";
 			};
@@ -293,7 +293,7 @@
 			tegra_adx1: adx@2903800 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903800 0x100>;
+				reg = <0x0 0x2903800 0x0 0x100>;
 				sound-name-prefix = "ADX1";
 				status = "disabled";
 			};
@@ -301,7 +301,7 @@
 			tegra_adx2: adx@2903900 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903900 0x100>;
+				reg = <0x0 0x2903900 0x0 0x100>;
 				sound-name-prefix = "ADX2";
 				status = "disabled";
 			};
@@ -309,7 +309,7 @@
 			tegra_adx3: adx@2903a00 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903a00 0x100>;
+				reg = <0x0 0x2903a00 0x0 0x100>;
 				sound-name-prefix = "ADX3";
 				status = "disabled";
 			};
@@ -317,14 +317,14 @@
 			tegra_adx4: adx@2903b00 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903b00 0x100>;
+				reg = <0x0 0x2903b00 0x0 0x100>;
 				sound-name-prefix = "ADX4";
 				status = "disabled";
 			};
 
 			tegra_dmic1: dmic@2904000 {
 				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904000 0x100>;
+				reg = <0x0 0x2904000 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DMIC1>;
 				clock-names = "dmic";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC1>;
@@ -336,7 +336,7 @@
 
 			tegra_dmic2: dmic@2904100 {
 				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904100 0x100>;
+				reg = <0x0 0x2904100 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DMIC2>;
 				clock-names = "dmic";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC2>;
@@ -348,7 +348,7 @@
 
 			tegra_dmic3: dmic@2904200 {
 				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904200 0x100>;
+				reg = <0x0 0x2904200 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DMIC3>;
 				clock-names = "dmic";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC3>;
@@ -360,7 +360,7 @@
 
 			tegra_dmic4: dmic@2904300 {
 				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904300 0x100>;
+				reg = <0x0 0x2904300 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DMIC4>;
 				clock-names = "dmic";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC4>;
@@ -372,7 +372,7 @@
 
 			tegra_dspk1: dspk@2905000 {
 				compatible = "nvidia,tegra186-dspk";
-				reg = <0x2905000 0x100>;
+				reg = <0x0 0x2905000 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DSPK1>;
 				clock-names = "dspk";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>;
@@ -384,7 +384,7 @@
 
 			tegra_dspk2: dspk@2905100 {
 				compatible = "nvidia,tegra186-dspk";
-				reg = <0x2905100 0x100>;
+				reg = <0x0 0x2905100 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DSPK2>;
 				clock-names = "dspk";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK2>;
@@ -397,9 +397,9 @@
 			tegra_ope1: processing-engine@2908000 {
 				compatible = "nvidia,tegra186-ope",
 					     "nvidia,tegra210-ope";
-				reg = <0x2908000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <1>;
+				reg = <0x0 0x2908000 0x0 0x100>;
+				#address-cells = <2>;
+				#size-cells = <2>;
 				ranges;
 				sound-name-prefix = "OPE1";
 				status = "disabled";
@@ -407,20 +407,20 @@
 				equalizer@2908100 {
 					compatible = "nvidia,tegra186-peq",
 						     "nvidia,tegra210-peq";
-					reg = <0x2908100 0x100>;
+					reg = <0x0 0x2908100 0x0 0x100>;
 				};
 
 				dynamic-range-compressor@2908200 {
 					compatible = "nvidia,tegra186-mbdrc",
 						     "nvidia,tegra210-mbdrc";
-					reg = <0x2908200 0x200>;
+					reg = <0x0 0x2908200 0x0 0x200>;
 				};
 			};
 
 			tegra_mvc1: mvc@290a000 {
 				compatible = "nvidia,tegra186-mvc",
 					     "nvidia,tegra210-mvc";
-				reg = <0x290a000 0x200>;
+				reg = <0x0 0x290a000 0x0 0x200>;
 				sound-name-prefix = "MVC1";
 				status = "disabled";
 			};
@@ -428,7 +428,7 @@
 			tegra_mvc2: mvc@290a200 {
 				compatible = "nvidia,tegra186-mvc",
 					     "nvidia,tegra210-mvc";
-				reg = <0x290a200 0x200>;
+				reg = <0x0 0x290a200 0x0 0x200>;
 				sound-name-prefix = "MVC2";
 				status = "disabled";
 			};
@@ -436,14 +436,14 @@
 			tegra_amixer: amixer@290bb00 {
 				compatible = "nvidia,tegra186-amixer",
 					     "nvidia,tegra210-amixer";
-				reg = <0x290bb00 0x800>;
+				reg = <0x0 0x290bb00 0x0 0x800>;
 				sound-name-prefix = "MIXER1";
 				status = "disabled";
 			};
 
 			tegra_admaif: admaif@290f000 {
 				compatible = "nvidia,tegra186-admaif";
-				reg = <0x0290f000 0x1000>;
+				reg = <0x0 0x0290f000 0x0 0x1000>;
 				dmas = <&adma 1>, <&adma 1>,
 				       <&adma 2>, <&adma 2>,
 				       <&adma 3>, <&adma 3>,
@@ -489,7 +489,7 @@
 
 			tegra_asrc: asrc@2910000 {
 				compatible = "nvidia,tegra186-asrc";
-				reg = <0x2910000 0x2000>;
+				reg = <0x0 0x2910000 0x0 0x2000>;
 				sound-name-prefix = "ASRC1";
 				status = "disabled";
 			};
@@ -497,7 +497,7 @@
 
 		adma: dma-controller@2930000 {
 			compatible = "nvidia,tegra186-adma";
-			reg = <0x02930000 0x20000>;
+			reg = <0x0 0x02930000 0x0 0x20000>;
 			interrupt-parent = <&agic>;
 			interrupts =  <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -542,8 +542,8 @@
 				     "nvidia,tegra210-agic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
-			reg = <0x02a41000 0x1000>,
-			      <0x02a42000 0x2000>;
+			reg = <0x0 0x02a41000 0x0 0x1000>,
+			      <0x0 0x02a42000 0x0 0x2000>;
 			interrupts = <GIC_SPI 145
 				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&bpmp TEGRA186_CLK_APE>;
@@ -612,6 +612,8 @@
 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTA>;
 		resets = <&bpmp TEGRA186_RESET_UARTA>;
+		dmas = <&gpcdma 8>, <&gpcdma 8>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -621,9 +623,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTB>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTB>;
-		reset-names = "serial";
+		dmas = <&gpcdma 9>, <&gpcdma 9>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -633,9 +635,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTD>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTD>;
-		reset-names = "serial";
+		dmas = <&gpcdma 19>, <&gpcdma 19>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -645,9 +647,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTE>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTE>;
-		reset-names = "serial";
+		dmas = <&gpcdma 20>, <&gpcdma 20>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -657,9 +659,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTF>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTF>;
-		reset-names = "serial";
+		dmas = <&gpcdma 12>, <&gpcdma 12>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -1183,7 +1185,7 @@
 	};
 
 	cec@3960000 {
-		compatible = "nvidia,tegra186-cec";
+		compatible = "nvidia,tegra186-cec", "nvidia,tegra210-cec";
 		reg = <0x0 0x03960000 0x0 0x10000>;
 		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_CEC>;
@@ -1236,9 +1238,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTC>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTC>;
-		reset-names = "serial";
+		dmas = <&gpcdma 3>, <&gpcdma 3>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -1248,9 +1250,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTG>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTG>;
-		reset-names = "serial";
+		dmas = <&gpcdma 2>, <&gpcdma 2>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -1511,10 +1513,10 @@
 		resets = <&bpmp TEGRA186_RESET_HOST1X>;
 		reset-names = "host1x";
 
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 
-		ranges = <0x15000000 0x0 0x15000000 0x01000000>;
+		ranges = <0x0 0x15000000 0x0 0x15000000 0x0 0x01000000>;
 
 		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HOST1XDMAR &emc>;
 		interconnect-names = "dma-mem";
@@ -1533,7 +1535,7 @@
 
 		dpaux1: dpaux@15040000 {
 			compatible = "nvidia,tegra186-dpaux";
-			reg = <0x15040000 0x10000>;
+			reg = <0x0 0x15040000 0x0 0x10000>;
 			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DPAUX1>,
 				 <&bpmp TEGRA186_CLK_PLLDP>;
@@ -1567,7 +1569,7 @@
 
 		display-hub@15200000 {
 			compatible = "nvidia,tegra186-display";
-			reg = <0x15200000 0x00040000>;
+			reg = <0x0 0x15200000 0x0 0x00040000>;
 			resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
 				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
 				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
@@ -1585,14 +1587,14 @@
 
 			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
 
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
 
-			ranges = <0x15200000 0x15200000 0x40000>;
+			ranges = <0x0 0x15200000 0x0 0x15200000 0x0 0x40000>;
 
 			display@15200000 {
 				compatible = "nvidia,tegra186-dc";
-				reg = <0x15200000 0x10000>;
+				reg = <0x0 0x15200000 0x0 0x10000>;
 				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>;
 				clock-names = "dc";
@@ -1611,7 +1613,7 @@
 
 			display@15210000 {
 				compatible = "nvidia,tegra186-dc";
-				reg = <0x15210000 0x10000>;
+				reg = <0x0 0x15210000 0x0 0x10000>;
 				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>;
 				clock-names = "dc";
@@ -1630,7 +1632,7 @@
 
 			display@15220000 {
 				compatible = "nvidia,tegra186-dc";
-				reg = <0x15220000 0x10000>;
+				reg = <0x0 0x15220000 0x0 0x10000>;
 				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>;
 				clock-names = "dc";
@@ -1650,7 +1652,7 @@
 
 		dsia: dsi@15300000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15300000 0x10000>;
+			reg = <0x0 0x15300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSI>,
 				 <&bpmp TEGRA186_CLK_DSIA_LP>,
@@ -1665,7 +1667,7 @@
 
 		vic@15340000 {
 			compatible = "nvidia,tegra186-vic";
-			reg = <0x15340000 0x40000>;
+			reg = <0x0 0x15340000 0x0 0x40000>;
 			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_VIC>;
 			clock-names = "vic";
@@ -1681,7 +1683,7 @@
 
 		nvjpg@15380000 {
 			compatible = "nvidia,tegra186-nvjpg";
-			reg = <0x15380000 0x40000>;
+			reg = <0x0 0x15380000 0x0 0x40000>;
 			clocks = <&bpmp TEGRA186_CLK_NVJPG>;
 			clock-names = "nvjpg";
 			resets = <&bpmp TEGRA186_RESET_NVJPG>;
@@ -1696,7 +1698,7 @@
 
 		dsib: dsi@15400000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15400000 0x10000>;
+			reg = <0x0 0x15400000 0x0 0x10000>;
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSIB>,
 				 <&bpmp TEGRA186_CLK_DSIB_LP>,
@@ -1711,7 +1713,7 @@
 
 		nvdec@15480000 {
 			compatible = "nvidia,tegra186-nvdec";
-			reg = <0x15480000 0x40000>;
+			reg = <0x0 0x15480000 0x0 0x40000>;
 			clocks = <&bpmp TEGRA186_CLK_NVDEC>;
 			clock-names = "nvdec";
 			resets = <&bpmp TEGRA186_RESET_NVDEC>;
@@ -1727,7 +1729,7 @@
 
 		nvenc@154c0000 {
 			compatible = "nvidia,tegra186-nvenc";
-			reg = <0x154c0000 0x40000>;
+			reg = <0x0 0x154c0000 0x0 0x40000>;
 			clocks = <&bpmp TEGRA186_CLK_NVENC>;
 			clock-names = "nvenc";
 			resets = <&bpmp TEGRA186_RESET_NVENC>;
@@ -1742,7 +1744,7 @@
 
 		sor0: sor@15540000 {
 			compatible = "nvidia,tegra186-sor";
-			reg = <0x15540000 0x10000>;
+			reg = <0x0 0x15540000 0x0 0x10000>;
 			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_SOR0>,
 				 <&bpmp TEGRA186_CLK_SOR0_OUT>,
@@ -1766,7 +1768,7 @@
 
 		sor1: sor@15580000 {
 			compatible = "nvidia,tegra186-sor";
-			reg = <0x15580000 0x10000>;
+			reg = <0x0 0x15580000 0x0 0x10000>;
 			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_SOR1>,
 				 <&bpmp TEGRA186_CLK_SOR1_OUT>,
@@ -1790,7 +1792,7 @@
 
 		dpaux: dpaux@155c0000 {
 			compatible = "nvidia,tegra186-dpaux";
-			reg = <0x155c0000 0x10000>;
+			reg = <0x0 0x155c0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DPAUX>,
 				 <&bpmp TEGRA186_CLK_PLLDP>;
@@ -1824,7 +1826,7 @@
 
 		padctl@15880000 {
 			compatible = "nvidia,tegra186-dsi-padctl";
-			reg = <0x15880000 0x10000>;
+			reg = <0x0 0x15880000 0x0 0x10000>;
 			resets = <&bpmp TEGRA186_RESET_DSI>;
 			reset-names = "dsi";
 			status = "disabled";
@@ -1832,7 +1834,7 @@
 
 		dsic: dsi@15900000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15900000 0x10000>;
+			reg = <0x0 0x15900000 0x0 0x10000>;
 			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSIC>,
 				 <&bpmp TEGRA186_CLK_DSIC_LP>,
@@ -1847,7 +1849,7 @@
 
 		dsid: dsi@15940000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15940000 0x10000>;
+			reg = <0x0 0x15940000 0x0 0x10000>;
 			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSID>,
 				 <&bpmp TEGRA186_CLK_DSID_LP>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 5b59c1986e9b..43942db6eac9 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -53,7 +53,59 @@
 			status = "okay";
 		};
 
+		i2c@c240000 {
+			status = "okay";
+
+			power-sensor@40 {
+				compatible = "ti,ina3221";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				input@0 {
+					reg = <0x0>;
+					label = "GPU";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@1 {
+					reg = <0x1>;
+					label = "CPU";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@2 {
+					reg = <0x2>;
+					label = "SOC";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina3221";
+				reg = <0x41>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				input@0 {
+					reg = <0x0>;
+					label = "CV";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@1 {
+					reg = <0x1>;
+					label = "VDDRQ";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@2 {
+					reg = <0x2>;
+					label = "SYS5V";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+			};
+		};
+
 		serial@3110000 {
+			/delete-property/ dmas;
+			/delete-property/ dma-names;
 			status = "okay";
 		};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 64a3398fe7a6..ea6f397a2792 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -2062,8 +2062,15 @@
 
 			ports {
 				usb2-0 {
-					mode = "host";
+					mode = "otg";
+					usb-role-switch;
 					status = "okay";
+
+					port {
+						hs_typec_p0: endpoint {
+							remote-endpoint = <&hs_ucsi_ccg_p0>;
+						};
+					};
 				};
 
 				usb2-1 {
@@ -2094,6 +2101,14 @@
 			};
 		};
 
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-0", "usb3-0";
+		};
+
 		usb@3610000 {
 			status = "okay";
 
@@ -2106,6 +2121,46 @@
 			phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3";
 		};
 
+		cec@3960000 {
+			status = "okay";
+
+			hdmi-phandle = <&sor2>;
+		};
+
+		i2c@c240000 {
+			typec@8 {
+				compatible = "cypress,cypd4226";
+				reg = <0x08>;
+				interrupt-parent = <&gpio_aon>;
+				interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>;
+				firmware-name = "nvidia,jetson-agx-xavier";
+				status = "okay";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ccg_typec_con0: connector@0 {
+					compatible = "usb-c-connector";
+					reg = <0>;
+					label = "USB-C";
+					data-role = "dual";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							hs_ucsi_ccg_p0: endpoint {
+								remote-endpoint = <&hs_typec_p0>;
+							};
+						};
+					};
+				};
+			};
+		};
+
 		i2c@c250000 {
 			status = "okay";
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
index 4a17ea5e40fd..16cf4414de59 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
@@ -2174,6 +2174,12 @@
 			phy-names = "usb2-1", "usb2-2", "usb3-2";
 		};
 
+		cec@3960000 {
+			status = "okay";
+
+			hdmi-phandle = <&sor1>;
+		};
+
 		host1x@13e00000 {
 			display-hub@15200000 {
 				status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
index 58f190b0f868..a410fc335fa3 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
@@ -50,7 +50,36 @@
 			status = "okay";
 		};
 
+		i2c@c250000 {
+			status = "okay";
+
+			power-sensor@40 {
+				compatible = "ti,ina3221";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				input@0 {
+					reg = <0x0>;
+					label = "VDD_IN";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@1 {
+					reg = <0x1>;
+					label = "VDD_CPU_GPU_CV";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@2 {
+					reg = <0x2>;
+					label = "VDD_SOC";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+			};
+		};
+
 		serial@3100000 {
+			/delete-property/ dmas;
+			/delete-property/ dma-names;
 			status = "okay";
 		};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 33f92b77cd9d..1399342f23e1 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -747,6 +747,8 @@
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTA>;
 			resets = <&bpmp TEGRA194_RESET_UARTA>;
+			dmas = <&gpcdma 8>, <&gpcdma 8>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -757,6 +759,8 @@
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTB>;
 			resets = <&bpmp TEGRA194_RESET_UARTB>;
+			dmas = <&gpcdma 9>, <&gpcdma 9>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -766,9 +770,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTD>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTD>;
-			reset-names = "serial";
+			dmas = <&gpcdma 19>, <&gpcdma 19>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -778,9 +782,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTE>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTE>;
-			reset-names = "serial";
+			dmas = <&gpcdma 20>, <&gpcdma 20>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -790,9 +794,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTF>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTF>;
-			reset-names = "serial";
+			dmas = <&gpcdma 12>, <&gpcdma 12>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -817,9 +821,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTH>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTH>;
-			reset-names = "serial";
+			dmas = <&gpcdma 13>, <&gpcdma 13>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -1339,7 +1343,7 @@
 		};
 
 		cec@3960000 {
-			compatible = "nvidia,tegra194-cec";
+			compatible = "nvidia,tegra194-cec", "nvidia,tegra210-cec";
 			reg = <0x0 0x03960000 0x0 0x10000>;
 			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_CEC>;
@@ -1616,9 +1620,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTC>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTC>;
-			reset-names = "serial";
+			dmas = <&gpcdma 3>, <&gpcdma 3>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -1628,9 +1632,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTG>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTG>;
-			reset-names = "serial";
+			dmas = <&gpcdma 2>, <&gpcdma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 0ae5a44f7d07..e07aeeee3586 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -11,6 +11,7 @@
 		rtc0 = "/i2c@7000d000/pmic@3c";
 		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
+		serial3 = &uartd;
 	};
 
 	chosen {
@@ -24,6 +25,7 @@
 
 	gpu@57000000 {
 		vdd-supply = <&vdd_gpu>;
+		status = "okay";
 	};
 
 	/* debug port */
@@ -33,6 +35,64 @@
 		status = "okay";
 	};
 
+	serial@70006300 {
+		/delete-property/ reg-shift;
+		status = "okay";
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+
+		bluetooth {
+			compatible = "brcm,bcm43540-bt";
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 5) IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "host-wakeup";
+		};
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+
+		tmp451: temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 4) IRQ_TYPE_LEVEL_LOW>;
+			vcc-supply = <&vdd_1v8>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+
+		power-sensor@40 {
+			compatible = "ti,ina3221";
+			reg = <0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			input@0 {
+				reg = <0x0>;
+				label = "VDD_IN";
+				shunt-resistor-micro-ohms = <20000>;
+			};
+
+			input@1 {
+				reg = <0x1>;
+				label = "VDD_GPU";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+
+			input@2 {
+				reg = <0x2>;
+				label = "VDD_CPU";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+		};
+	};
+
 	i2c@7000c500 {
 		status = "okay";
 
@@ -295,6 +355,25 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	mmc@700b0200 {
+		status = "okay";
+		bus-width = <4>;
+		non-removable;
+		power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		vqmmc-supply = <&vdd_1v8>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wifi@1 {
+			compatible = "brcm,bcm4354-fmac", "brcm,bcm4329-fmac";
+			reg = <1>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 2) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
 	/* eMMC */
 	mmc@700b0600 {
 		status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index a6a58e51822d..627abf51a5a4 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -90,6 +90,12 @@
 		};
 	};
 
+	cec@70015000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	clock@70110000 {
 		status = "okay";
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index b4a1108c2dd7..584461f3a619 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1319,12 +1319,71 @@
 		status = "okay";
 		clock-frequency = <100000>;
 
+		power-sensor@42 {
+			compatible = "ti,ina3221";
+			reg = <0x42>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			input@0 {
+				reg = <0x0>;
+				label = "VDD_MUX";
+				shunt-resistor-micro-ohms = <20000>;
+			};
+
+			input@1 {
+				reg = <0x1>;
+				label = "VDD_5V_IO_SYS";
+				shunt-resistor-micro-ohms = <5000>;
+			};
+
+			input@2 {
+				reg = <0x2>;
+				label = "VDD_3V3_SYS";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+		};
+
+		power-sensor@43 {
+			compatible = "ti,ina3221";
+			reg = <0x43>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			input@0 {
+				reg = <0x0>;
+				label = "VDD_3V3_IO";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+
+			input@1 {
+				reg = <0x1>;
+				label = "VDD_1V8_IO";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+
+			input@2 {
+				reg = <0x2>;
+				label = "VDD_M2_IN";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+		};
+
 		exp1: gpio@74 {
 			compatible = "ti,tca9539";
 			reg = <0x74>;
 
 			#gpio-cells = <2>;
 			gpio-controller;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(L, 1) IRQ_TYPE_EDGE_FALLING>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio_1v8>;
 		};
 
 		exp2: gpio@77 {
@@ -1333,6 +1392,15 @@
 
 			#gpio-cells = <2>;
 			gpio-controller;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio_1v8>;
 		};
 	};
 
@@ -1517,6 +1585,7 @@
 		bus-width = <4>;
 
 		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
 
 		vqmmc-supply = <&vddio_sdmmc>;
 		vmmc-supply = <&vdd_3v3_sd>;
@@ -1554,6 +1623,18 @@
 		};
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 3 45334>;
+		fan-supply = <&vdd_fan>;
+		interrupt-parent = <&gpio>;
+		interrupts = <TEGRA_GPIO(K, 7) IRQ_TYPE_EDGE_RISING>;
+
+		/* cooling level (0, 1, 2, 3) - pwm inverted */
+		cooling-levels = <255 128 64 0>;
+		#cooling-cells = <2>;
+	};
+
 	vdd_sys_mux: regulator-vdd-sys-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_SYS_MUX";
@@ -1603,7 +1684,7 @@
 		regulator-name = "VDD_3V3_SD";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		vin-supply = <&vdd_3v3_sys>;
 
@@ -1635,7 +1716,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
-		gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+		gpio = <&exp1 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		vin-supply = <&vdd_1v8>;
 	};
@@ -1709,4 +1790,67 @@
 		enable-active-high;
 		vin-supply = <&vdd_5v0_sys>;
 	};
+
+	vdd_fan: regulator-vdd-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_FAN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&exp1 4 GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_5v0_sys>;
+
+		regulator-enable-ramp-delay = <284>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				map1 {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				map2 {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				map3 {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
index bbd6ff0564da..b84a8e39b404 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
@@ -1365,7 +1365,7 @@
 				};
 			};
 
-			hog-0 {
+			max77620-hog {
 				gpio-hog;
 				output-high;
 				gpios = <2 GPIO_ACTIVE_HIGH>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index c56824d7f4d8..ec0e84cb83ef 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -266,7 +266,6 @@
 					regulator-max-microvolt = <1170000>;
 					regulator-enable-ramp-delay = <146>;
 					regulator-ramp-delay = <27500>;
-					regulator-ramp-delay-scale = <300>;
 					regulator-always-on;
 					regulator-boot-on;
 
@@ -281,7 +280,6 @@
 					regulator-max-microvolt = <1150000>;
 					regulator-enable-ramp-delay = <176>;
 					regulator-ramp-delay = <27500>;
-					regulator-ramp-delay-scale = <300>;
 					regulator-always-on;
 					regulator-boot-on;
 
@@ -296,7 +294,6 @@
 					regulator-max-microvolt = <1350000>;
 					regulator-enable-ramp-delay = <176>;
 					regulator-ramp-delay = <27500>;
-					regulator-ramp-delay-scale = <350>;
 					regulator-always-on;
 					regulator-boot-on;
 
@@ -311,7 +308,6 @@
 					regulator-max-microvolt = <1800000>;
 					regulator-enable-ramp-delay = <242>;
 					regulator-ramp-delay = <27500>;
-					regulator-ramp-delay-scale = <360>;
 					regulator-always-on;
 					regulator-boot-on;
 
@@ -326,7 +322,6 @@
 					regulator-max-microvolt = <1200000>;
 					regulator-enable-ramp-delay = <26>;
 					regulator-ramp-delay = <100000>;
-					regulator-ramp-delay-scale = <200>;
 					regulator-always-on;
 					regulator-boot-on;
 
@@ -341,7 +336,6 @@
 					regulator-max-microvolt = <1050000>;
 					regulator-enable-ramp-delay = <22>;
 					regulator-ramp-delay = <100000>;
-					regulator-ramp-delay-scale = <200>;
 
 					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
 					maxim,active-fps-power-up-slot = <0>;
@@ -354,7 +348,6 @@
 					regulator-max-microvolt = <3300000>;
 					regulator-enable-ramp-delay = <62>;
 					regulator-ramp-delay = <100000>;
-					regulator-ramp-delay-scale = <200>;
 
 					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
 					maxim,active-fps-power-up-slot = <0>;
@@ -371,7 +364,6 @@
 					regulator-max-microvolt = <1100000>;
 					regulator-enable-ramp-delay = <22>;
 					regulator-ramp-delay = <100000>;
-					regulator-ramp-delay-scale = <200>;
 					regulator-disable-active-discharge;
 					regulator-always-on;
 					regulator-boot-on;
@@ -395,7 +387,6 @@
 					regulator-max-microvolt = <1050000>;
 					regulator-enable-ramp-delay = <24>;
 					regulator-ramp-delay = <100000>;
-					regulator-ramp-delay-scale = <200>;
 
 					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
 					maxim,active-fps-power-up-slot = <3>;
@@ -408,7 +399,6 @@
 					regulator-max-microvolt = <1050000>;
 					regulator-enable-ramp-delay = <22>;
 					regulator-ramp-delay = <100000>;
-					regulator-ramp-delay-scale = <200>;
 
 					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
 					maxim,active-fps-power-up-slot = <6>;
@@ -429,6 +419,12 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	cec@70015000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	hda@70030000 {
 		nvidia,model = "NVIDIA Jetson Nano HDA";
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 9ebb7369256e..5aa6afd56cbc 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -25,7 +25,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};
@@ -1362,6 +1362,19 @@
 		};
 	};
 
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <1000000>;
+
+		touchscreen: i2c-hid-dev@20 {
+				compatible = "hid-over-i2c";
+				reg = <0x20>;
+				hid-descr-addr = <0x0020>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
 	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <1000000>;
@@ -1385,6 +1398,11 @@
 					reg = <0x55>;
 				};
 			};
+
+			usbc_extcon0: extcon0 {
+				compatible = "google,extcon-usbc-cros-ec";
+				google,usb-port-id = <0>;
+			};
 		};
 	};
 
@@ -1719,6 +1737,15 @@
 			#gpio-cells = <2>;
 			status = "okay";
 		};
+
+		tmp451: temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 4) IRQ_TYPE_LEVEL_LOW>;
+			vcc-supply = <&pp1800>;
+			#thermal-sensor-cells = <1>;
+		};
 	};
 
 	pmc@7000e400 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 47f8268e46bf..402b0ede1472 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -874,6 +874,16 @@
 				pins = "sdmmc3";
 				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
 			};
+
+			gpio_1v8: gpio-1v8 {
+				pins = "gpio";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			gpio_3v3: gpio-3v3 {
+				pins = "gpio";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
 		};
 
 		powergates {
@@ -949,6 +959,15 @@
 		reset-names = "fuse";
 	};
 
+	cec@70015000 {
+		compatible = "nvidia,tegra210-cec";
+		reg = <0x0 0x070015000 0x0 0x1000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_CEC>;
+		clock-names = "cec";
+		status = "disabled";
+	};
+
 	mc: memory-controller@70019000 {
 		compatible = "nvidia,tegra210-mc";
 		reg = <0x0 0x70019000 0x0 0x1000>;
@@ -1218,6 +1237,8 @@
 		nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
 		nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
 		nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+		nvidia,pad-autocal-pull-up-offset-sdr104 = <0x0>;
+		nvidia,pad-autocal-pull-down-offset-sdr104 = <0x0>;
 		nvidia,default-tap = <0x2>;
 		nvidia,default-trim = <0x4>;
 		assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
@@ -2004,7 +2025,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
index cb792041fc62..d977f4901c09 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
@@ -1,146 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 
-#include "tegra234.dtsi"
 #include "tegra234-p3701.dtsi"
 
 / {
 	model = "NVIDIA Jetson AGX Orin";
 	compatible = "nvidia,p3701-0000", "nvidia,tegra234";
 
-	bus@0 {
-		i2c@3160000 {
-			status = "okay";
-
-			eeprom@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-
-				label = "module";
-				vcc-supply = <&vdd_1v8_hs>;
-				address-width = <8>;
-				pagesize = <8>;
-				size = <256>;
-				read-only;
-			};
-		};
-
-		spi@3270000 {
-			status = "okay";
-
-			flash@0 {
-				compatible = "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <102000000>;
-				spi-tx-bus-width = <4>;
-				spi-rx-bus-width = <4>;
-			};
-		};
-
-		mmc@3400000 {
-			status = "okay";
-			bus-width = <4>;
-			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
-			disable-wp;
-		};
-
-		mmc@3460000 {
-			status = "okay";
-			bus-width = <8>;
-			non-removable;
-		};
-
-		padctl@3520000 {
-			vclamp-usb-supply = <&vdd_1v8_ao>;
-			avdd-usb-supply = <&vdd_3v3_ao>;
-
-			ports {
-				usb2-0 {
-					vbus-supply = <&vdd_5v0_sys>;
-				};
-
-				usb2-1 {
-					vbus-supply = <&vdd_5v0_sys>;
-				};
-
-				usb2-2 {
-					vbus-supply = <&vdd_5v0_sys>;
-				};
-
-				usb2-3 {
-					vbus-supply = <&vdd_5v0_sys>;
-				};
-			};
-		};
-
-		rtc@c2a0000 {
-			status = "okay";
-		};
-
-		pmc@c360000 {
-			nvidia,invert-interrupt;
-		};
-	};
-
-	vdd_5v0_sys: regulator-vdd-5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "VIN_SYS_5V0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vdd_1v8_ls: regulator-vdd-1v8-ls {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_1V8_LS";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	vdd_1v8_hs: regulator-vdd-1v8-hs {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_1V8_HS";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	vdd_1v8_ao: regulator-vdd-1v8-ao {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_1V8_AO";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	vdd_3v3_ao: regulator-vdd-3v3-ao {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_3V3_AO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_3V3_PCIE";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio TEGRA234_MAIN_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
-		regulator-boot-on;
-		enable-active-high;
-	};
-
-	vdd_12v_pcie: regulator-vdd-12v-pcie {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_12V_PCIE";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>;
-		regulator-boot-on;
-	};
-
 	thermal-zones {
 		tj-thermal {
 			polling-delay = <1000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi
index 553fa4ba1cd4..0809634e5732 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi
@@ -1,145 +1,29 @@
 // SPDX-License-Identifier: GPL-2.0
 
-#include "tegra234.dtsi"
 #include "tegra234-p3701.dtsi"
 
 / {
 	compatible = "nvidia,p3701-0008", "nvidia,tegra234";
 
-	bus@0 {
-		i2c@3160000 {
+	thermal-zones {
+		tj-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <1000>;
 			status = "okay";
 
-			eeprom@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-				label = "module";
-				vcc-supply = <&vdd_1v8_hs>;
-				address-width = <8>;
-				pagesize = <8>;
-				size = <256>;
-				read-only;
-			};
-		};
-
-		spi@3270000 {
-			status = "okay";
-
-			flash@0 {
-				compatible = "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <102000000>;
-				spi-tx-bus-width = <4>;
-				spi-rx-bus-width = <4>;
-			};
-		};
-
-		mmc@3460000 {
-			status = "okay";
-			bus-width = <8>;
-			non-removable;
-		};
-
-		i2c@c240000 {
-			status = "okay";
-		};
-
-		i2c@c250000 {
-			power-sensor@41 {
-				compatible = "ti,ina3221";
-				reg = <0x41>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				input@0 {
-					reg = <0x0>;
-					label = "CVB_ATX_12V";
-					shunt-resistor-micro-ohms = <2000>;
-				};
-
-				input@1 {
-					reg = <0x1>;
-					label = "CVB_ATX_3V3";
-					shunt-resistor-micro-ohms = <2000>;
+			trips {
+				tj_trip_active0: active-0 {
+					temperature = <85000>;
+					hysteresis = <4000>;
+					type = "active";
 				};
 
-				input@2 {
-					reg = <0x2>;
-					label = "CVB_ATX_5V";
-					shunt-resistor-micro-ohms = <2000>;
+				tj_trip_active1: active-1 {
+					temperature = <105000>;
+					hysteresis = <4000>;
+					type = "active";
 				};
 			};
-
-			power-sensor@44 {
-				compatible = "ti,ina219";
-				reg = <0x44>;
-				shunt-resistor = <2000>;
-			};
-		};
-
-		rtc@c2a0000 {
-			status = "okay";
 		};
-
-		pmc@c360000 {
-			nvidia,invert-interrupt;
-		};
-	};
-
-	bpmp {
-		i2c {
-			status = "okay";
-
-			thermal-sensor@4c {
-				status = "okay";
-				reg = <0x4c>;
-				vcc-supply = <&vdd_1v8_ao>;
-			};
-		};
-
-		thermal {
-			status = "okay";
-		};
-	};
-
-	vdd_1v8_ao: regulator-vdd-1v8-ao {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_1V8_AO";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	vdd_1v8_hs: regulator-vdd-1v8-hs {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_1V8_HS";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	vdd_1v8_ls: regulator-vdd-1v8-ls {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_1V8_LS";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	vdd_3v3_ao: regulator-vdd-3v3-ao {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-AO-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vdd_5v0_sys: regulator-vdd-5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "VIN_SYS_5V0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi
index db6ef711674a..9086a0d010e5 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi
@@ -1,8 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0
 
+#include "tegra234.dtsi"
+
 / {
 	compatible = "nvidia,p3701", "nvidia,tegra234";
 
+	aliases {
+		mmc0 = "/bus@0/mmc@3460000";
+		mmc1 = "/bus@0/mmc@3400000";
+	};
+
 	bus@0 {
 		aconnect@2900000 {
 			status = "okay";
@@ -12,1980 +19,89 @@
 
 				i2s@2901000 {
 					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							i2s1_cif: endpoint {
-								remote-endpoint = <&xbar_i2s1>;
-							};
-						};
-
-						i2s1_port: port@1 {
-							reg = <1>;
-
-							i2s1_dap: endpoint {
-								dai-format = "i2s";
-								/* placeholder for external codec */
-							};
-						};
-					};
 				};
 
 				i2s@2901100 {
 					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							i2s2_cif: endpoint {
-								remote-endpoint = <&xbar_i2s2>;
-							};
-						};
-
-						i2s2_port: port@1 {
-							reg = <1>;
-
-							i2s2_dap: endpoint {
-								dai-format = "i2s";
-								/* placeholder for external codec */
-							};
-						};
-					};
 				};
 
 				i2s@2901300 {
 					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							i2s4_cif: endpoint {
-								remote-endpoint = <&xbar_i2s4>;
-							};
-						};
-
-						i2s4_port: port@1 {
-							reg = <1>;
-
-							i2s4_dap: endpoint {
-								dai-format = "i2s";
-								/* placeholder for external codec */
-							};
-						};
-					};
 				};
 
 				i2s@2901500 {
 					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							i2s6_cif: endpoint {
-								remote-endpoint = <&xbar_i2s6>;
-							};
-						};
-
-						i2s6_port: port@1 {
-							reg = <1>;
-
-							i2s6_dap: endpoint {
-								dai-format = "i2s";
-								/* placeholder for external codec */
-							};
-						};
-					};
-				};
-
-				sfc@2902000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							sfc1_cif_in: endpoint {
-								remote-endpoint = <&xbar_sfc1_in>;
-							};
-						};
-
-						sfc1_out_port: port@1 {
-							reg = <1>;
-
-							sfc1_cif_out: endpoint {
-								remote-endpoint = <&xbar_sfc1_out>;
-							};
-						};
-					};
-				};
-
-				sfc@2902200 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							sfc2_cif_in: endpoint {
-								remote-endpoint = <&xbar_sfc2_in>;
-							};
-						};
-
-						sfc2_out_port: port@1 {
-							reg = <1>;
-
-							sfc2_cif_out: endpoint {
-								remote-endpoint = <&xbar_sfc2_out>;
-							};
-						};
-					};
-				};
-
-				sfc@2902400 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							sfc3_cif_in: endpoint {
-								remote-endpoint = <&xbar_sfc3_in>;
-							};
-						};
-
-						sfc3_out_port: port@1 {
-							reg = <1>;
-
-							sfc3_cif_out: endpoint {
-								remote-endpoint = <&xbar_sfc3_out>;
-							};
-						};
-					};
-				};
-
-				sfc@2902600 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							sfc4_cif_in: endpoint {
-								remote-endpoint = <&xbar_sfc4_in>;
-							};
-						};
-
-						sfc4_out_port: port@1 {
-							reg = <1>;
-
-							sfc4_cif_out: endpoint {
-								remote-endpoint = <&xbar_sfc4_out>;
-							};
-						};
-					};
-				};
-
-				amx@2903000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							amx1_in1: endpoint {
-								remote-endpoint = <&xbar_amx1_in1>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							amx1_in2: endpoint {
-								remote-endpoint = <&xbar_amx1_in2>;
-							};
-						};
-
-						port@2 {
-							reg = <2>;
-
-							amx1_in3: endpoint {
-								remote-endpoint = <&xbar_amx1_in3>;
-							};
-						};
-
-						port@3 {
-							reg = <3>;
-
-							amx1_in4: endpoint {
-								remote-endpoint = <&xbar_amx1_in4>;
-							};
-						};
-
-						amx1_out_port: port@4 {
-							reg = <4>;
-
-							amx1_out: endpoint {
-								remote-endpoint = <&xbar_amx1_out>;
-							};
-						};
-					};
-				};
-
-				amx@2903100 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							amx2_in1: endpoint {
-								remote-endpoint = <&xbar_amx2_in1>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							amx2_in2: endpoint {
-								remote-endpoint = <&xbar_amx2_in2>;
-							};
-						};
-
-						port@2 {
-							reg = <2>;
-
-							amx2_in3: endpoint {
-								remote-endpoint = <&xbar_amx2_in3>;
-							};
-						};
-
-						port@3 {
-							reg = <3>;
-
-							amx2_in4: endpoint {
-								remote-endpoint = <&xbar_amx2_in4>;
-							};
-						};
-
-						amx2_out_port: port@4 {
-							reg = <4>;
-
-							amx2_out: endpoint {
-								remote-endpoint = <&xbar_amx2_out>;
-							};
-						};
-					};
-				};
-
-				amx@2903200 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							amx3_in1: endpoint {
-								remote-endpoint = <&xbar_amx3_in1>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							amx3_in2: endpoint {
-								remote-endpoint = <&xbar_amx3_in2>;
-							};
-						};
-
-						port@2 {
-							reg = <2>;
-
-							amx3_in3: endpoint {
-								remote-endpoint = <&xbar_amx3_in3>;
-							};
-						};
-
-						port@3 {
-							reg = <3>;
-
-							amx3_in4: endpoint {
-								remote-endpoint = <&xbar_amx3_in4>;
-							};
-						};
-
-						amx3_out_port: port@4 {
-							reg = <4>;
-
-							amx3_out: endpoint {
-								remote-endpoint = <&xbar_amx3_out>;
-							};
-						};
-					};
-				};
-
-				amx@2903300 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							amx4_in1: endpoint {
-								remote-endpoint = <&xbar_amx4_in1>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							amx4_in2: endpoint {
-								remote-endpoint = <&xbar_amx4_in2>;
-							};
-						};
-
-						port@2 {
-							reg = <2>;
-
-							amx4_in3: endpoint {
-								remote-endpoint = <&xbar_amx4_in3>;
-							};
-						};
-
-						port@3 {
-							reg = <3>;
-
-							amx4_in4: endpoint {
-								remote-endpoint = <&xbar_amx4_in4>;
-							};
-						};
-
-						amx4_out_port: port@4 {
-							reg = <4>;
-
-							amx4_out: endpoint {
-								remote-endpoint = <&xbar_amx4_out>;
-							};
-						};
-					};
-				};
-
-				adx@2903800 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							adx1_in: endpoint {
-								remote-endpoint = <&xbar_adx1_in>;
-							};
-						};
-
-						adx1_out1_port: port@1 {
-							reg = <1>;
-
-							adx1_out1: endpoint {
-								remote-endpoint = <&xbar_adx1_out1>;
-							};
-						};
-
-						adx1_out2_port: port@2 {
-							reg = <2>;
-
-							adx1_out2: endpoint {
-								remote-endpoint = <&xbar_adx1_out2>;
-							};
-						};
-
-						adx1_out3_port: port@3 {
-							reg = <3>;
-
-							adx1_out3: endpoint {
-								remote-endpoint = <&xbar_adx1_out3>;
-							};
-						};
-
-						adx1_out4_port: port@4 {
-							reg = <4>;
-
-							adx1_out4: endpoint {
-								remote-endpoint = <&xbar_adx1_out4>;
-							};
-						};
-					};
-				};
-
-				adx@2903900 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							adx2_in: endpoint {
-								remote-endpoint = <&xbar_adx2_in>;
-							};
-						};
-
-						adx2_out1_port: port@1 {
-							reg = <1>;
-
-							adx2_out1: endpoint {
-								remote-endpoint = <&xbar_adx2_out1>;
-							};
-						};
-
-						adx2_out2_port: port@2 {
-							reg = <2>;
-
-							adx2_out2: endpoint {
-								remote-endpoint = <&xbar_adx2_out2>;
-							};
-						};
-
-						adx2_out3_port: port@3 {
-							reg = <3>;
-
-							adx2_out3: endpoint {
-								remote-endpoint = <&xbar_adx2_out3>;
-							};
-						};
-
-						adx2_out4_port: port@4 {
-							reg = <4>;
-
-							adx2_out4: endpoint {
-								remote-endpoint = <&xbar_adx2_out4>;
-							};
-						};
-					};
-				};
-
-				adx@2903a00 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							adx3_in: endpoint {
-								remote-endpoint = <&xbar_adx3_in>;
-							};
-						};
-
-						adx3_out1_port: port@1 {
-							reg = <1>;
-
-							adx3_out1: endpoint {
-								remote-endpoint = <&xbar_adx3_out1>;
-							};
-						};
-
-						adx3_out2_port: port@2 {
-							reg = <2>;
-
-							adx3_out2: endpoint {
-								remote-endpoint = <&xbar_adx3_out2>;
-							};
-						};
-
-						adx3_out3_port: port@3 {
-							reg = <3>;
-
-							adx3_out3: endpoint {
-								remote-endpoint = <&xbar_adx3_out3>;
-							};
-						};
-
-						adx3_out4_port: port@4 {
-							reg = <4>;
-
-							adx3_out4: endpoint {
-								remote-endpoint = <&xbar_adx3_out4>;
-							};
-						};
-					};
-				};
-
-				adx@2903b00 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							adx4_in: endpoint {
-								remote-endpoint = <&xbar_adx4_in>;
-							};
-						};
-
-						adx4_out1_port: port@1 {
-							reg = <1>;
-
-							adx4_out1: endpoint {
-								remote-endpoint = <&xbar_adx4_out1>;
-							};
-						};
-
-						adx4_out2_port: port@2 {
-							reg = <2>;
-
-							adx4_out2: endpoint {
-								remote-endpoint = <&xbar_adx4_out2>;
-							};
-						};
-
-						adx4_out3_port: port@3 {
-							reg = <3>;
-
-							adx4_out3: endpoint {
-								remote-endpoint = <&xbar_adx4_out3>;
-							};
-						};
-
-						adx4_out4_port: port@4 {
-							reg = <4>;
-
-							adx4_out4: endpoint {
-								remote-endpoint = <&xbar_adx4_out4>;
-							};
-						};
-					};
 				};
 
 				dmic@2904200 {
 					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							dmic3_cif: endpoint {
-								remote-endpoint = <&xbar_dmic3>;
-							};
-						};
-
-						dmic3_port: port@1 {
-							reg = <1>;
-
-							dmic3_dap: endpoint {
-								/* placeholder for external codec */
-							};
-						};
-					};
 				};
+			};
 
-				processing-engine@2908000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0x0>;
-
-							ope1_cif_in_ep: endpoint {
-								remote-endpoint = <&xbar_ope1_in_ep>;
-							};
-						};
-
-						ope1_out_port: port@1 {
-							reg = <0x1>;
-
-							ope1_cif_out_ep: endpoint {
-								remote-endpoint = <&xbar_ope1_out_ep>;
-							};
-						};
-					};
-				};
-
-				mvc@290a000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							mvc1_cif_in: endpoint {
-								remote-endpoint = <&xbar_mvc1_in>;
-							};
-						};
-
-						mvc1_out_port: port@1 {
-							reg = <1>;
-
-							mvc1_cif_out: endpoint {
-								remote-endpoint = <&xbar_mvc1_out>;
-							};
-						};
-					};
-				};
-
-				mvc@290a200 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							mvc2_cif_in: endpoint {
-								remote-endpoint = <&xbar_mvc2_in>;
-							};
-						};
-
-						mvc2_out_port: port@1 {
-							reg = <1>;
-
-							mvc2_cif_out: endpoint {
-								remote-endpoint = <&xbar_mvc2_out>;
-							};
-						};
-					};
-				};
-
-				amixer@290bb00 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0x0>;
-
-							mix_in1: endpoint {
-								remote-endpoint = <&xbar_mix_in1>;
-							};
-						};
-
-						port@1 {
-							reg = <0x1>;
-
-							mix_in2: endpoint {
-								remote-endpoint = <&xbar_mix_in2>;
-							};
-						};
-
-						port@2 {
-							reg = <0x2>;
-
-							mix_in3: endpoint {
-								remote-endpoint = <&xbar_mix_in3>;
-							};
-						};
-
-						port@3 {
-							reg = <0x3>;
-
-							mix_in4: endpoint {
-								remote-endpoint = <&xbar_mix_in4>;
-							};
-						};
-
-						port@4 {
-							reg = <0x4>;
-
-							mix_in5: endpoint {
-								remote-endpoint = <&xbar_mix_in5>;
-							};
-						};
-
-						port@5 {
-							reg = <0x5>;
-
-							mix_in6: endpoint {
-								remote-endpoint = <&xbar_mix_in6>;
-							};
-						};
-
-						port@6 {
-							reg = <0x6>;
-
-							mix_in7: endpoint {
-								remote-endpoint = <&xbar_mix_in7>;
-							};
-						};
-
-						port@7 {
-							reg = <0x7>;
-
-							mix_in8: endpoint {
-								remote-endpoint = <&xbar_mix_in8>;
-							};
-						};
-
-						port@8 {
-							reg = <0x8>;
-
-							mix_in9: endpoint {
-								remote-endpoint = <&xbar_mix_in9>;
-							};
-						};
-
-						port@9 {
-							reg = <0x9>;
-
-							mix_in10: endpoint {
-								remote-endpoint = <&xbar_mix_in10>;
-							};
-						};
-
-						mix_out1_port: port@a {
-							reg = <0xa>;
+			dma-controller@2930000 {
+				status = "okay";
+			};
 
-							mix_out1: endpoint {
-								remote-endpoint = <&xbar_mix_out1>;
-							};
-						};
+			interrupt-controller@2a40000 {
+				status = "okay";
+			};
+		};
 
-						mix_out2_port: port@b {
-							reg = <0xb>;
+		i2c@3160000 {
+			status = "okay";
 
-							mix_out2: endpoint {
-								remote-endpoint = <&xbar_mix_out2>;
-							};
-						};
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
 
-						mix_out3_port: port@c {
-							reg = <0xc>;
+				label = "module";
+				vcc-supply = <&vdd_1v8_hs>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
 
-							mix_out3: endpoint {
-								remote-endpoint = <&xbar_mix_out3>;
-							};
-						};
+		spi@3270000 {
+			status = "okay";
 
-						mix_out4_port: port@d {
-							reg = <0xd>;
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <102000000>;
+				spi-tx-bus-width = <4>;
+				spi-rx-bus-width = <4>;
+			};
+		};
 
-							mix_out4: endpoint {
-								remote-endpoint = <&xbar_mix_out4>;
-							};
-						};
+		mmc@3460000 {
+			status = "okay";
+			bus-width = <8>;
+			non-removable;
+		};
 
-						mix_out5_port: port@e {
-							reg = <0xe>;
+		padctl@3520000 {
+			vclamp-usb-supply = <&vdd_1v8_ao>;
+			avdd-usb-supply = <&vdd_3v3_ao>;
 
-							mix_out5: endpoint {
-								remote-endpoint = <&xbar_mix_out5>;
-							};
-						};
-					};
+			ports {
+				usb2-0 {
+					vbus-supply = <&vdd_5v0_sys>;
 				};
 
-				admaif@290f000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						admaif0_port: port@0 {
-							reg = <0x0>;
-
-							admaif0: endpoint {
-								remote-endpoint = <&xbar_admaif0>;
-							};
-						};
-
-						admaif1_port: port@1 {
-							reg = <0x1>;
-
-							admaif1: endpoint {
-								remote-endpoint = <&xbar_admaif1>;
-							};
-						};
-
-						admaif2_port: port@2 {
-							reg = <0x2>;
-
-							admaif2: endpoint {
-								remote-endpoint = <&xbar_admaif2>;
-							};
-						};
-
-						admaif3_port: port@3 {
-							reg = <0x3>;
-
-							admaif3: endpoint {
-								remote-endpoint = <&xbar_admaif3>;
-							};
-						};
-
-						admaif4_port: port@4 {
-							reg = <0x4>;
-
-							admaif4: endpoint {
-								remote-endpoint = <&xbar_admaif4>;
-							};
-						};
-
-						admaif5_port: port@5 {
-							reg = <0x5>;
-
-							admaif5: endpoint {
-								remote-endpoint = <&xbar_admaif5>;
-							};
-						};
-
-						admaif6_port: port@6 {
-							reg = <0x6>;
-
-							admaif6: endpoint {
-								remote-endpoint = <&xbar_admaif6>;
-							};
-						};
-
-						admaif7_port: port@7 {
-							reg = <0x7>;
-
-							admaif7: endpoint {
-								remote-endpoint = <&xbar_admaif7>;
-							};
-						};
-
-						admaif8_port: port@8 {
-							reg = <0x8>;
-
-							admaif8: endpoint {
-								remote-endpoint = <&xbar_admaif8>;
-							};
-						};
-
-						admaif9_port: port@9 {
-							reg = <0x9>;
-
-							admaif9: endpoint {
-								remote-endpoint = <&xbar_admaif9>;
-							};
-						};
-
-						admaif10_port: port@a {
-							reg = <0xa>;
-
-							admaif10: endpoint {
-								remote-endpoint = <&xbar_admaif10>;
-							};
-						};
-
-						admaif11_port: port@b {
-							reg = <0xb>;
-
-							admaif11: endpoint {
-								remote-endpoint = <&xbar_admaif11>;
-							};
-						};
-
-						admaif12_port: port@c {
-							reg = <0xc>;
-
-							admaif12: endpoint {
-								remote-endpoint = <&xbar_admaif12>;
-							};
-						};
-
-						admaif13_port: port@d {
-							reg = <0xd>;
-
-							admaif13: endpoint {
-								remote-endpoint = <&xbar_admaif13>;
-							};
-						};
-
-						admaif14_port: port@e {
-							reg = <0xe>;
-
-							admaif14: endpoint {
-								remote-endpoint = <&xbar_admaif14>;
-							};
-						};
-
-						admaif15_port: port@f {
-							reg = <0xf>;
-
-							admaif15: endpoint {
-								remote-endpoint = <&xbar_admaif15>;
-							};
-						};
-
-						admaif16_port: port@10 {
-							reg = <0x10>;
-
-							admaif16: endpoint {
-								remote-endpoint = <&xbar_admaif16>;
-							};
-						};
-
-						admaif17_port: port@11 {
-							reg = <0x11>;
-
-							admaif17: endpoint {
-								remote-endpoint = <&xbar_admaif17>;
-							};
-						};
-
-						admaif18_port: port@12 {
-							reg = <0x12>;
-
-							admaif18: endpoint {
-								remote-endpoint = <&xbar_admaif18>;
-							};
-						};
-
-						admaif19_port: port@13 {
-							reg = <0x13>;
-
-							admaif19: endpoint {
-								remote-endpoint = <&xbar_admaif19>;
-							};
-						};
-					};
+				usb2-1 {
+					vbus-supply = <&vdd_5v0_sys>;
 				};
 
-				asrc@2910000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0x0>;
-
-							asrc_in1_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in1_ep>;
-							};
-						};
-
-						port@1 {
-							reg = <0x1>;
-
-							asrc_in2_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in2_ep>;
-							};
-						};
-
-						port@2 {
-							reg = <0x2>;
-
-							asrc_in3_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in3_ep>;
-							};
-						};
-
-						port@3 {
-							reg = <0x3>;
-
-							asrc_in4_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in4_ep>;
-							};
-						};
-
-						port@4 {
-							reg = <0x4>;
-
-							asrc_in5_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in5_ep>;
-							};
-						};
-
-						port@5 {
-							reg = <0x5>;
-
-							asrc_in6_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in6_ep>;
-							};
-						};
-
-						port@6 {
-							reg = <0x6>;
-
-							asrc_in7_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in7_ep>;
-							};
-						};
-
-						asrc_out1_port: port@7 {
-							reg = <0x7>;
-
-							asrc_out1_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out1_ep>;
-							};
-						};
-
-						asrc_out2_port: port@8 {
-							reg = <0x8>;
-
-							asrc_out2_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out2_ep>;
-							};
-						};
-
-						asrc_out3_port: port@9 {
-							reg = <0x9>;
-
-							asrc_out3_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out3_ep>;
-							};
-						};
-
-						asrc_out4_port: port@a {
-							reg = <0xa>;
-
-							asrc_out4_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out4_ep>;
-							};
-						};
-
-						asrc_out5_port: port@b {
-							reg = <0xb>;
-
-							asrc_out5_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out5_ep>;
-							};
-						};
-
-						asrc_out6_port:	port@c {
-							reg = <0xc>;
-
-							asrc_out6_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out6_ep>;
-							};
-						};
-					};
+				usb2-2 {
+					vbus-supply = <&vdd_5v0_sys>;
 				};
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0x0>;
-
-						xbar_admaif0: endpoint {
-							remote-endpoint = <&admaif0>;
-						};
-					};
-
-					port@1 {
-						reg = <0x1>;
-
-						xbar_admaif1: endpoint {
-							remote-endpoint = <&admaif1>;
-						};
-					};
-
-					port@2 {
-						reg = <0x2>;
-
-						xbar_admaif2: endpoint {
-							remote-endpoint = <&admaif2>;
-						};
-					};
-
-					port@3 {
-						reg = <0x3>;
-
-						xbar_admaif3: endpoint {
-							remote-endpoint = <&admaif3>;
-						};
-					};
-
-					port@4 {
-						reg = <0x4>;
-
-						xbar_admaif4: endpoint {
-							remote-endpoint = <&admaif4>;
-						};
-					};
-
-					port@5 {
-						reg = <0x5>;
-
-						xbar_admaif5: endpoint {
-							remote-endpoint = <&admaif5>;
-						};
-					};
-
-					port@6 {
-						reg = <0x6>;
-
-						xbar_admaif6: endpoint {
-							remote-endpoint = <&admaif6>;
-						};
-					};
-
-					port@7 {
-						reg = <0x7>;
-
-						xbar_admaif7: endpoint {
-							remote-endpoint = <&admaif7>;
-						};
-					};
-
-					port@8 {
-						reg = <0x8>;
-
-						xbar_admaif8: endpoint {
-							remote-endpoint = <&admaif8>;
-						};
-					};
-
-					port@9 {
-						reg = <0x9>;
-
-						xbar_admaif9: endpoint {
-							remote-endpoint = <&admaif9>;
-						};
-					};
-
-					port@a {
-						reg = <0xa>;
-
-						xbar_admaif10: endpoint {
-							remote-endpoint = <&admaif10>;
-						};
-					};
-
-					port@b {
-						reg = <0xb>;
-
-						xbar_admaif11: endpoint {
-							remote-endpoint = <&admaif11>;
-						};
-					};
-
-					port@c {
-						reg = <0xc>;
-
-						xbar_admaif12: endpoint {
-							remote-endpoint = <&admaif12>;
-						};
-					};
-
-					port@d {
-						reg = <0xd>;
-
-						xbar_admaif13: endpoint {
-							remote-endpoint = <&admaif13>;
-						};
-					};
-
-					port@e {
-						reg = <0xe>;
-
-						xbar_admaif14: endpoint {
-							remote-endpoint = <&admaif14>;
-						};
-					};
-
-					port@f {
-						reg = <0xf>;
-
-						xbar_admaif15: endpoint {
-							remote-endpoint = <&admaif15>;
-						};
-					};
-
-					port@10 {
-						reg = <0x10>;
-
-						xbar_admaif16: endpoint {
-							remote-endpoint = <&admaif16>;
-						};
-					};
-
-					port@11 {
-						reg = <0x11>;
-
-						xbar_admaif17: endpoint {
-							remote-endpoint = <&admaif17>;
-						};
-					};
-
-					port@12 {
-						reg = <0x12>;
-
-						xbar_admaif18: endpoint {
-							remote-endpoint = <&admaif18>;
-						};
-					};
-
-					port@13 {
-						reg = <0x13>;
-
-						xbar_admaif19: endpoint {
-							remote-endpoint = <&admaif19>;
-						};
-					};
-
-					xbar_i2s1_port: port@14 {
-						reg = <0x14>;
-
-						xbar_i2s1: endpoint {
-							remote-endpoint = <&i2s1_cif>;
-						};
-					};
-
-					xbar_i2s2_port: port@15 {
-						reg = <0x15>;
-
-						xbar_i2s2: endpoint {
-							remote-endpoint = <&i2s2_cif>;
-						};
-					};
-
-					xbar_i2s4_port: port@17 {
-						reg = <0x17>;
-
-						xbar_i2s4: endpoint {
-							remote-endpoint = <&i2s4_cif>;
-						};
-					};
-
-					xbar_i2s6_port: port@19 {
-						reg = <0x19>;
-
-						xbar_i2s6: endpoint {
-							remote-endpoint = <&i2s6_cif>;
-						};
-					};
-
-					xbar_dmic3_port: port@1c {
-						reg = <0x1c>;
-
-						xbar_dmic3: endpoint {
-							remote-endpoint = <&dmic3_cif>;
-						};
-					};
-
-					xbar_sfc1_in_port: port@20 {
-						reg = <0x20>;
-
-						xbar_sfc1_in: endpoint {
-							remote-endpoint = <&sfc1_cif_in>;
-						};
-					};
-
-					port@21 {
-						reg = <0x21>;
-
-						xbar_sfc1_out: endpoint {
-							remote-endpoint = <&sfc1_cif_out>;
-						};
-					};
-
-					xbar_sfc2_in_port: port@22 {
-						reg = <0x22>;
-
-						xbar_sfc2_in: endpoint {
-							remote-endpoint = <&sfc2_cif_in>;
-						};
-					};
-
-					port@23 {
-						reg = <0x23>;
-
-						xbar_sfc2_out: endpoint {
-							remote-endpoint = <&sfc2_cif_out>;
-						};
-					};
-
-					xbar_sfc3_in_port: port@24 {
-						reg = <0x24>;
-
-						xbar_sfc3_in: endpoint {
-							remote-endpoint = <&sfc3_cif_in>;
-						};
-					};
-
-					port@25 {
-						reg = <0x25>;
-
-						xbar_sfc3_out: endpoint {
-							remote-endpoint = <&sfc3_cif_out>;
-						};
-					};
-
-					xbar_sfc4_in_port: port@26 {
-						reg = <0x26>;
-
-						xbar_sfc4_in: endpoint {
-							remote-endpoint = <&sfc4_cif_in>;
-						};
-					};
-
-					port@27 {
-						reg = <0x27>;
-
-						xbar_sfc4_out: endpoint {
-							remote-endpoint = <&sfc4_cif_out>;
-						};
-					};
-
-					xbar_mvc1_in_port: port@28 {
-						reg = <0x28>;
-
-						xbar_mvc1_in: endpoint {
-							remote-endpoint = <&mvc1_cif_in>;
-						};
-					};
-
-					port@29 {
-						reg = <0x29>;
-
-						xbar_mvc1_out: endpoint {
-							remote-endpoint = <&mvc1_cif_out>;
-						};
-					};
-
-					xbar_mvc2_in_port: port@2a {
-						reg = <0x2a>;
-
-						xbar_mvc2_in: endpoint {
-							remote-endpoint = <&mvc2_cif_in>;
-						};
-					};
-
-					port@2b {
-						reg = <0x2b>;
-
-						xbar_mvc2_out: endpoint {
-							remote-endpoint = <&mvc2_cif_out>;
-						};
-					};
-
-					xbar_amx1_in1_port: port@2c {
-						reg = <0x2c>;
-
-						xbar_amx1_in1: endpoint {
-							remote-endpoint = <&amx1_in1>;
-						};
-					};
-
-					xbar_amx1_in2_port: port@2d {
-						reg = <0x2d>;
-
-						xbar_amx1_in2: endpoint {
-							remote-endpoint = <&amx1_in2>;
-						};
-					};
-
-					xbar_amx1_in3_port: port@2e {
-						reg = <0x2e>;
-
-						xbar_amx1_in3: endpoint {
-							remote-endpoint = <&amx1_in3>;
-						};
-					};
-
-					xbar_amx1_in4_port: port@2f {
-						reg = <0x2f>;
-
-						xbar_amx1_in4: endpoint {
-							remote-endpoint = <&amx1_in4>;
-						};
-					};
-
-					port@30 {
-						reg = <0x30>;
-
-						xbar_amx1_out: endpoint {
-							remote-endpoint = <&amx1_out>;
-						};
-					};
-
-					xbar_amx2_in1_port: port@31 {
-						reg = <0x31>;
-
-						xbar_amx2_in1: endpoint {
-							remote-endpoint = <&amx2_in1>;
-						};
-					};
-
-					xbar_amx2_in2_port: port@32 {
-						reg = <0x32>;
-
-						xbar_amx2_in2: endpoint {
-							remote-endpoint = <&amx2_in2>;
-						};
-					};
-
-					xbar_amx2_in3_port: port@33 {
-						reg = <0x33>;
-
-						xbar_amx2_in3: endpoint {
-							remote-endpoint = <&amx2_in3>;
-						};
-					};
-
-					xbar_amx2_in4_port: port@34 {
-						reg = <0x34>;
-
-						xbar_amx2_in4: endpoint {
-							remote-endpoint = <&amx2_in4>;
-						};
-					};
-
-					port@35 {
-						reg = <0x35>;
-
-						xbar_amx2_out: endpoint {
-							remote-endpoint = <&amx2_out>;
-						};
-					};
-
-					xbar_amx3_in1_port: port@36 {
-						reg = <0x36>;
-
-						xbar_amx3_in1: endpoint {
-							remote-endpoint = <&amx3_in1>;
-						};
-					};
-
-					xbar_amx3_in2_port: port@37 {
-						reg = <0x37>;
-
-						xbar_amx3_in2: endpoint {
-							remote-endpoint = <&amx3_in2>;
-						};
-					};
-
-					xbar_amx3_in3_port: port@38 {
-						reg = <0x38>;
-
-						xbar_amx3_in3: endpoint {
-							remote-endpoint = <&amx3_in3>;
-						};
-					};
-
-					xbar_amx3_in4_port: port@39 {
-						reg = <0x39>;
-
-						xbar_amx3_in4: endpoint {
-							remote-endpoint = <&amx3_in4>;
-						};
-					};
-
-					port@3a {
-						reg = <0x3a>;
-
-						xbar_amx3_out: endpoint {
-							remote-endpoint = <&amx3_out>;
-						};
-					};
-
-					xbar_amx4_in1_port: port@3b {
-						reg = <0x3b>;
-
-						xbar_amx4_in1: endpoint {
-							remote-endpoint = <&amx4_in1>;
-						};
-					};
-
-					xbar_amx4_in2_port: port@3c {
-						reg = <0x3c>;
-
-						xbar_amx4_in2: endpoint {
-							remote-endpoint = <&amx4_in2>;
-						};
-					};
-
-					xbar_amx4_in3_port: port@3d {
-						reg = <0x3d>;
-
-						xbar_amx4_in3: endpoint {
-							remote-endpoint = <&amx4_in3>;
-						};
-					};
-
-					xbar_amx4_in4_port: port@3e {
-						reg = <0x3e>;
-
-						xbar_amx4_in4: endpoint {
-							remote-endpoint = <&amx4_in4>;
-						};
-					};
-
-					port@3f {
-						reg = <0x3f>;
-
-						xbar_amx4_out: endpoint {
-							remote-endpoint = <&amx4_out>;
-						};
-					};
-
-					xbar_adx1_in_port: port@40 {
-						reg = <0x40>;
-
-						xbar_adx1_in: endpoint {
-							remote-endpoint = <&adx1_in>;
-						};
-					};
-
-					port@41 {
-						reg = <0x41>;
-
-						xbar_adx1_out1: endpoint {
-							remote-endpoint = <&adx1_out1>;
-						};
-					};
-
-					port@42 {
-						reg = <0x42>;
-
-						xbar_adx1_out2: endpoint {
-							remote-endpoint = <&adx1_out2>;
-						};
-					};
-
-					port@43 {
-						reg = <0x43>;
-
-						xbar_adx1_out3: endpoint {
-							remote-endpoint = <&adx1_out3>;
-						};
-					};
-
-					port@44 {
-						reg = <0x44>;
-
-						xbar_adx1_out4: endpoint {
-							remote-endpoint = <&adx1_out4>;
-						};
-					};
-
-					xbar_adx2_in_port: port@45 {
-						reg = <0x45>;
-
-						xbar_adx2_in: endpoint {
-							remote-endpoint = <&adx2_in>;
-						};
-					};
-
-					port@46 {
-						reg = <0x46>;
-
-						xbar_adx2_out1: endpoint {
-							remote-endpoint = <&adx2_out1>;
-						};
-					};
-
-					port@47 {
-						reg = <0x47>;
-
-						xbar_adx2_out2: endpoint {
-							remote-endpoint = <&adx2_out2>;
-						};
-					};
-
-					port@48 {
-						reg = <0x48>;
-
-						xbar_adx2_out3: endpoint {
-							remote-endpoint = <&adx2_out3>;
-						};
-					};
-
-					port@49 {
-						reg = <0x49>;
-
-						xbar_adx2_out4: endpoint {
-							remote-endpoint = <&adx2_out4>;
-						};
-					};
-
-					xbar_adx3_in_port: port@4a {
-						reg = <0x4a>;
-
-						xbar_adx3_in: endpoint {
-							remote-endpoint = <&adx3_in>;
-						};
-					};
-
-					port@4b {
-						reg = <0x4b>;
-
-						xbar_adx3_out1: endpoint {
-							remote-endpoint = <&adx3_out1>;
-						};
-					};
-
-					port@4c {
-						reg = <0x4c>;
-
-						xbar_adx3_out2: endpoint {
-							remote-endpoint = <&adx3_out2>;
-						};
-					};
-
-					port@4d {
-						reg = <0x4d>;
-
-						xbar_adx3_out3: endpoint {
-							remote-endpoint = <&adx3_out3>;
-						};
-					};
-
-					port@4e {
-						reg = <0x4e>;
-
-						xbar_adx3_out4: endpoint {
-							remote-endpoint = <&adx3_out4>;
-						};
-					};
-
-					xbar_adx4_in_port: port@4f {
-						reg = <0x4f>;
-
-						xbar_adx4_in: endpoint {
-							remote-endpoint = <&adx4_in>;
-						};
-					};
-
-					port@50 {
-						reg = <0x50>;
-
-						xbar_adx4_out1: endpoint {
-							remote-endpoint = <&adx4_out1>;
-						};
-					};
-
-					port@51 {
-						reg = <0x51>;
-
-						xbar_adx4_out2: endpoint {
-							remote-endpoint = <&adx4_out2>;
-						};
-					};
-
-					port@52 {
-						reg = <0x52>;
-
-						xbar_adx4_out3: endpoint {
-							remote-endpoint = <&adx4_out3>;
-						};
-					};
-
-					port@53 {
-						reg = <0x53>;
-
-						xbar_adx4_out4: endpoint {
-							remote-endpoint = <&adx4_out4>;
-						};
-					};
-
-					xbar_mix_in1_port: port@54 {
-						reg = <0x54>;
-
-						xbar_mix_in1: endpoint {
-							remote-endpoint = <&mix_in1>;
-						};
-					};
-
-					xbar_mix_in2_port: port@55 {
-						reg = <0x55>;
-
-						xbar_mix_in2: endpoint {
-							remote-endpoint = <&mix_in2>;
-						};
-					};
-
-					xbar_mix_in3_port: port@56 {
-						reg = <0x56>;
-
-						xbar_mix_in3: endpoint {
-							remote-endpoint = <&mix_in3>;
-						};
-					};
-
-					xbar_mix_in4_port: port@57 {
-						reg = <0x57>;
-
-						xbar_mix_in4: endpoint {
-							remote-endpoint = <&mix_in4>;
-						};
-					};
-
-					xbar_mix_in5_port: port@58 {
-						reg = <0x58>;
-
-						xbar_mix_in5: endpoint {
-							remote-endpoint = <&mix_in5>;
-						};
-					};
-
-					xbar_mix_in6_port: port@59 {
-						reg = <0x59>;
-
-						xbar_mix_in6: endpoint {
-							remote-endpoint = <&mix_in6>;
-						};
-					};
-
-					xbar_mix_in7_port: port@5a {
-						reg = <0x5a>;
-
-						xbar_mix_in7: endpoint {
-							remote-endpoint = <&mix_in7>;
-						};
-					};
-
-					xbar_mix_in8_port: port@5b {
-						reg = <0x5b>;
-
-						xbar_mix_in8: endpoint {
-							remote-endpoint = <&mix_in8>;
-						};
-					};
-
-					xbar_mix_in9_port: port@5c {
-						reg = <0x5c>;
-
-						xbar_mix_in9: endpoint {
-							remote-endpoint = <&mix_in9>;
-						};
-					};
-
-					xbar_mix_in10_port: port@5d {
-						reg = <0x5d>;
-
-						xbar_mix_in10: endpoint {
-							remote-endpoint = <&mix_in10>;
-						};
-					};
-
-					port@5e {
-						reg = <0x5e>;
-
-						xbar_mix_out1: endpoint {
-							remote-endpoint = <&mix_out1>;
-						};
-					};
-
-					port@5f {
-						reg = <0x5f>;
-
-						xbar_mix_out2: endpoint {
-							remote-endpoint = <&mix_out2>;
-						};
-					};
-
-					port@60 {
-						reg = <0x60>;
-
-						xbar_mix_out3: endpoint {
-							remote-endpoint = <&mix_out3>;
-						};
-					};
-
-					port@61 {
-						reg = <0x61>;
-
-						xbar_mix_out4: endpoint {
-							remote-endpoint = <&mix_out4>;
-						};
-					};
-
-					port@62 {
-						reg = <0x62>;
-
-						xbar_mix_out5: endpoint {
-							remote-endpoint = <&mix_out5>;
-						};
-					};
-
-					xbar_asrc_in1_port: port@63 {
-						reg = <0x63>;
-
-						xbar_asrc_in1_ep: endpoint {
-							remote-endpoint = <&asrc_in1_ep>;
-						};
-					};
-
-					port@64 {
-						reg = <0x64>;
-
-						xbar_asrc_out1_ep: endpoint {
-							remote-endpoint = <&asrc_out1_ep>;
-						};
-					};
-
-					xbar_asrc_in2_port: port@65 {
-						reg = <0x65>;
-
-						xbar_asrc_in2_ep: endpoint {
-							remote-endpoint = <&asrc_in2_ep>;
-						};
-					};
-
-					port@66 {
-						reg = <0x66>;
-
-						xbar_asrc_out2_ep: endpoint {
-							remote-endpoint = <&asrc_out2_ep>;
-						};
-					};
-
-					xbar_asrc_in3_port: port@67 {
-						reg = <0x67>;
-
-						xbar_asrc_in3_ep: endpoint {
-							remote-endpoint = <&asrc_in3_ep>;
-						};
-					};
-
-					port@68 {
-						reg = <0x68>;
-
-						xbar_asrc_out3_ep: endpoint {
-							remote-endpoint = <&asrc_out3_ep>;
-						};
-					};
-
-					xbar_asrc_in4_port: port@69 {
-						reg = <0x69>;
-
-						xbar_asrc_in4_ep: endpoint {
-							remote-endpoint = <&asrc_in4_ep>;
-						};
-					};
-
-					port@6a {
-						reg = <0x6a>;
-
-						xbar_asrc_out4_ep: endpoint {
-							remote-endpoint = <&asrc_out4_ep>;
-						};
-					};
-
-					xbar_asrc_in5_port: port@6b {
-						reg = <0x6b>;
-
-						xbar_asrc_in5_ep: endpoint {
-							remote-endpoint = <&asrc_in5_ep>;
-						};
-					};
-
-					port@6c {
-						reg = <0x6c>;
-
-						xbar_asrc_out5_ep: endpoint {
-							remote-endpoint = <&asrc_out5_ep>;
-						};
-					};
-
-					xbar_asrc_in6_port: port@6d {
-						reg = <0x6d>;
-
-						xbar_asrc_in6_ep: endpoint {
-							remote-endpoint = <&asrc_in6_ep>;
-						};
-					};
-
-					port@6e {
-						reg = <0x6e>;
-
-						xbar_asrc_out6_ep: endpoint {
-							remote-endpoint = <&asrc_out6_ep>;
-						};
-					};
-
-					xbar_asrc_in7_port: port@6f {
-						reg = <0x6f>;
-
-						xbar_asrc_in7_ep: endpoint {
-							remote-endpoint = <&asrc_in7_ep>;
-						};
-					};
-
-					xbar_ope1_in_port: port@70 {
-						reg = <0x70>;
-
-						xbar_ope1_in_ep: endpoint {
-							remote-endpoint = <&ope1_cif_in_ep>;
-						};
-					};
-
-					port@71 {
-						reg = <0x71>;
-
-						xbar_ope1_out_ep: endpoint {
-							remote-endpoint = <&ope1_cif_out_ep>;
-						};
-					};
+				usb2-3 {
+					vbus-supply = <&vdd_5v0_sys>;
 				};
 			};
-
-			dma-controller@2930000 {
-				status = "okay";
-			};
-
-			interrupt-controller@2a40000 {
-				status = "okay";
-			};
 		};
 
 		i2c@c240000 {
@@ -2040,5 +156,71 @@
 				};
 			};
 		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+
+			thermal-sensor@4c {
+				compatible = "ti,tmp451";
+				status = "okay";
+				reg = <0x4c>;
+				vcc-supply = <&vdd_1v8_ao>;
+			};
+		};
+
+		thermal {
+			status = "okay";
+		};
+	};
+
+	vdd_1v8_ao: regulator-vdd-1v8-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_hs: regulator-vdd-1v8-hs {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_HS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_ls: regulator-vdd-1v8-ls {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_LS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_ao: regulator-vdd-3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_AO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN_SYS_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index ea13c4a7027c..4c0e96f9d493 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -1,448 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/input/gpio-keys.h>
-
+// Module files must be included first
 #include "tegra234-p3701-0000.dtsi"
-#include "tegra234-p3737-0000.dtsi"
+#include "tegra234-p3737-0000+p3701.dtsi"
 
 / {
 	model = "NVIDIA Jetson AGX Orin Developer Kit";
 	compatible = "nvidia,p3737-0000+p3701-0000", "nvidia,p3701-0000", "nvidia,tegra234";
-
-	aliases {
-		mmc3 = "/bus@0/mmc@3460000";
-		serial0 = &tcu;
-		serial1 = &uarta;
-	};
-
-	chosen {
-		bootargs = "console=ttyTCU0,115200n8";
-		stdout-path = "serial0:115200n8";
-	};
-
-	bus@0 {
-		serial@3100000 {
-			compatible = "nvidia,tegra194-hsuart";
-			reset-names = "serial";
-			status = "okay";
-		};
-
-		serial@31d0000 {
-			current-speed = <115200>;
-			status = "okay";
-		};
-
-		pwm@32a0000 {
-			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
-			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
-			status = "okay";
-		};
-
-		hda@3510000 {
-			nvidia,model = "NVIDIA Jetson AGX Orin HDA";
-			status = "okay";
-		};
-
-		padctl@3520000 {
-			status = "okay";
-
-			pads {
-				usb2 {
-					lanes {
-						usb2-0 {
-							status = "okay";
-						};
-
-						usb2-1 {
-							status = "okay";
-						};
-
-						usb2-2 {
-							status = "okay";
-						};
-
-						usb2-3 {
-							status = "okay";
-						};
-					};
-				};
-
-				usb3 {
-					lanes {
-						usb3-0 {
-							status = "okay";
-						};
-
-						usb3-1 {
-							status = "okay";
-						};
-
-						usb3-2 {
-							status = "okay";
-						};
-					};
-				};
-			};
-
-			ports {
-				usb2-0 {
-					mode = "otg";
-					usb-role-switch;
-					status = "okay";
-
-					port {
-						hs_typec_p1: endpoint {
-							remote-endpoint = <&hs_ucsi_ccg_p1>;
-						};
-					};
-				};
-
-				usb2-1 {
-					mode = "host";
-					status = "okay";
-
-					port {
-						hs_typec_p0: endpoint {
-							remote-endpoint = <&hs_ucsi_ccg_p0>;
-						};
-					};
-				};
-
-				usb2-2 {
-					mode = "host";
-					status = "okay";
-				};
-
-				usb2-3 {
-					mode = "host";
-					status = "okay";
-				};
-
-				usb3-0 {
-					nvidia,usb2-companion = <1>;
-					status = "okay";
-
-					port {
-						ss_typec_p0: endpoint {
-							remote-endpoint = <&ss_ucsi_ccg_p0>;
-						};
-					};
-				};
-
-				usb3-1 {
-					nvidia,usb2-companion = <0>;
-					status = "okay";
-
-					port {
-						ss_typec_p1: endpoint {
-							remote-endpoint = <&ss_ucsi_ccg_p1>;
-						};
-					};
-				};
-
-				usb3-2 {
-					nvidia,usb2-companion = <3>;
-					status = "okay";
-				};
-			};
-		};
-
-		usb@3550000 {
-			status = "okay";
-
-			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
-			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
-			phy-names = "usb2-0", "usb3-0";
-		};
-
-		usb@3610000 {
-			status = "okay";
-
-			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
-			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
-			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
-			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
-			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
-			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
-			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
-			phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
-				    "usb3-0", "usb3-1", "usb3-2";
-		};
-
-		ethernet@6800000 {
-			status = "okay";
-
-			phy-handle = <&mgbe0_phy>;
-			phy-mode = "usxgmii";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				mgbe0_phy: phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c45";
-					reg = <0x0>;
-
-					#phy-cells = <0>;
-				};
-			};
-		};
-
-		i2c@c240000 {
-			status = "okay";
-
-			typec@8 {
-				compatible = "cypress,cypd4226";
-				reg = <0x08>;
-				interrupt-parent = <&gpio>;
-				interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>;
-				firmware-name = "nvidia,jetson-agx-xavier";
-				status = "okay";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ccg_typec_con0: connector@0 {
-					compatible = "usb-c-connector";
-					reg = <0>;
-					label = "USB-C";
-					data-role = "host";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							hs_ucsi_ccg_p0: endpoint {
-								remote-endpoint = <&hs_typec_p0>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							ss_ucsi_ccg_p0: endpoint {
-								remote-endpoint = <&ss_typec_p0>;
-							};
-						};
-					};
-				};
-
-				ccg_typec_con1: connector@1 {
-					compatible = "usb-c-connector";
-					reg = <1>;
-					label = "USB-C";
-					data-role = "dual";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							hs_ucsi_ccg_p1: endpoint {
-								remote-endpoint = <&hs_typec_p1>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							ss_ucsi_ccg_p1: endpoint {
-								remote-endpoint = <&ss_typec_p1>;
-							};
-						};
-					};
-				};
-			};
-		};
-
-		pcie@14100000 {
-			status = "okay";
-
-			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
-
-			phys = <&p2u_hsio_3>;
-			phy-names = "p2u-0";
-		};
-
-		pcie@14160000 {
-			status = "okay";
-
-			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
-
-			phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
-			       <&p2u_hsio_7>;
-			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
-		};
-
-		pcie@141a0000 {
-			status = "okay";
-
-			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
-			vpcie3v3-supply = <&vdd_3v3_pcie>;
-			vpcie12v-supply = <&vdd_12v_pcie>;
-
-			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
-			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
-			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
-			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
-				    "p2u-5", "p2u-6", "p2u-7";
-		};
-
-		pcie-ep@141a0000 {
-			status = "disabled";
-
-			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
-
-			reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
-
-			nvidia,refclk-select-gpios = <&gpio_aon
-						      TEGRA234_AON_GPIO(AA, 4)
-						      GPIO_ACTIVE_HIGH>;
-
-			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
-			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
-			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
-			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
-				    "p2u-5", "p2u-6", "p2u-7";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		status = "okay";
-
-		key-force-recovery {
-			label = "Force Recovery";
-			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <BTN_1>;
-		};
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_POWER>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		key-suspend {
-			label = "Suspend";
-			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_SLEEP>;
-		};
-	};
-
-	pwm-fan {
-		cooling-levels = <66 215 255>;
-	};
-
-	serial {
-		status = "okay";
-	};
-
-	sound {
-		compatible = "nvidia,tegra186-audio-graph-card";
-		status = "okay";
-
-		dais = /* ADMAIF (FE) Ports */
-		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
-		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
-		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
-		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
-		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
-		       /* XBAR Ports */
-		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>,
-		       <&xbar_i2s6_port>, <&xbar_dmic3_port>,
-		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
-		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
-		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
-		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
-		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
-		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
-		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
-		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
-		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
-		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
-		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
-		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
-		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
-		       <&xbar_mix_in1_port>, <&xbar_mix_in2_port>,
-		       <&xbar_mix_in3_port>, <&xbar_mix_in4_port>,
-		       <&xbar_mix_in5_port>, <&xbar_mix_in6_port>,
-		       <&xbar_mix_in7_port>, <&xbar_mix_in8_port>,
-		       <&xbar_mix_in9_port>, <&xbar_mix_in10_port>,
-		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
-		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
-		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
-		       <&xbar_asrc_in7_port>,
-		       <&xbar_ope1_in_port>,
-		       /* HW accelerators */
-		       <&sfc1_out_port>, <&sfc2_out_port>,
-		       <&sfc3_out_port>, <&sfc4_out_port>,
-		       <&mvc1_out_port>, <&mvc2_out_port>,
-		       <&amx1_out_port>, <&amx2_out_port>,
-		       <&amx3_out_port>, <&amx4_out_port>,
-		       <&adx1_out1_port>, <&adx1_out2_port>,
-		       <&adx1_out3_port>, <&adx1_out4_port>,
-		       <&adx2_out1_port>, <&adx2_out2_port>,
-		       <&adx2_out3_port>, <&adx2_out4_port>,
-		       <&adx3_out1_port>, <&adx3_out2_port>,
-		       <&adx3_out3_port>, <&adx3_out4_port>,
-		       <&adx4_out1_port>, <&adx4_out2_port>,
-		       <&adx4_out3_port>, <&adx4_out4_port>,
-		       <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>,
-		       <&mix_out4_port>, <&mix_out5_port>,
-		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
-		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
-		       <&ope1_out_port>,
-		       /* BE I/O Ports */
-		       <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
-		       <&dmic3_port>;
-
-		label = "NVIDIA Jetson AGX Orin APE";
-
-		widgets = "Microphone",	"CVB-RT MIC Jack",
-			  "Microphone",	"CVB-RT MIC",
-			  "Headphone",	"CVB-RT HP Jack",
-			  "Speaker",	"CVB-RT SPK";
-
-		routing = /* I2S1 <-> RT5640 */
-			  "CVB-RT AIF1 Playback",	"I2S1 DAP-Playback",
-			  "I2S1 DAP-Capture",		"CVB-RT AIF1 Capture",
-			  /* RT5640 codec controls */
-			  "CVB-RT HP Jack",		"CVB-RT HPOL",
-			  "CVB-RT HP Jack",		"CVB-RT HPOR",
-			  "CVB-RT IN1P",		"CVB-RT MIC Jack",
-			  "CVB-RT IN2P",		"CVB-RT MIC Jack",
-			  "CVB-RT SPK",			"CVB-RT SPOLP",
-			  "CVB-RT SPK",			"CVB-RT SPORP",
-			  "CVB-RT DMIC1",		"CVB-RT MIC",
-			  "CVB-RT DMIC2",		"CVB-RT MIC";
-	};
-
-	thermal-zones {
-		tj-thermal {
-			cooling-maps {
-				map-active-0 {
-					cooling-device = <&fan 0 1>;
-					trip = <&tj_trip_active0>;
-				};
-
-				map-active-1 {
-					cooling-device = <&fan 1 2>;
-					trip = <&tj_trip_active1>;
-				};
-			};
-		};
-	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0008.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0008.dts
new file mode 100644
index 000000000000..979f085691a1
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0008.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+// Module files must be included first
+#include "tegra234-p3701-0008.dtsi"
+#include "tegra234-p3737-0000+p3701.dtsi"
+
+/ {
+	model = "NVIDIA Jetson AGX Orin Developer Kit";
+	compatible = "nvidia,p3737-0000+p3701-0008", "nvidia,p3701-0008", "nvidia,tegra234";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701.dtsi
new file mode 100644
index 000000000000..f6cad29355e6
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701.dtsi
@@ -0,0 +1,547 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/tegra234-clock.h>
+#include <dt-bindings/gpio/tegra234-gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/sound/rt5640.h>
+
+/ {
+	aliases {
+		serial0 = &tcu;
+		serial1 = &uarta;
+	};
+
+	chosen {
+		bootargs = "console=ttyTCU0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		aconnect@2900000 {
+			ahub@2900800 {
+				i2s@2901000 {
+					ports {
+						port@1 {
+							endpoint {
+								dai-format = "i2s";
+								remote-endpoint = <&rt5640_ep>;
+							};
+						};
+					};
+				};
+			};
+		};
+
+		serial@3100000 {
+			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
+			status = "okay";
+		};
+
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@56 {
+				compatible = "atmel,24c02";
+				reg = <0x56>;
+
+				label = "system";
+				vcc-supply = <&vdd_1v8_sys>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		serial@31d0000 {
+			current-speed = <115200>;
+			status = "okay";
+		};
+
+		i2c@31e0000 {
+			status = "okay";
+
+			audio-codec@1c {
+				compatible = "realtek,rt5640";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
+				clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
+				clock-names = "mclk";
+				realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
+				realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
+				realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
+				sound-name-prefix = "CVB-RT";
+
+				port {
+					rt5640_ep: endpoint {
+						remote-endpoint = <&i2s1_dap>;
+						mclk-fs = <256>;
+					};
+				};
+			};
+		};
+
+		pwm@3280000 {
+			status = "okay";
+		};
+
+		pwm@32a0000 {
+			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			status = "okay";
+		};
+
+		pwm@32c0000 {
+			status = "okay";
+		};
+
+		pwm@32f0000 {
+			status = "okay";
+		};
+
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+			disable-wp;
+		};
+
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson AGX Orin HDA";
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							status = "okay";
+						};
+
+						usb2-1 {
+							status = "okay";
+						};
+
+						usb2-2 {
+							status = "okay";
+						};
+
+						usb2-3 {
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							status = "okay";
+						};
+
+						usb3-1 {
+							status = "okay";
+						};
+
+						usb3-2 {
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					mode = "otg";
+					usb-role-switch;
+					status = "okay";
+
+					port {
+						hs_typec_p1: endpoint {
+							remote-endpoint = <&hs_ucsi_ccg_p1>;
+						};
+					};
+				};
+
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+
+					port {
+						hs_typec_p0: endpoint {
+							remote-endpoint = <&hs_ucsi_ccg_p0>;
+						};
+					};
+				};
+
+				usb2-2 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-3 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb3-0 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+
+					port {
+						ss_typec_p0: endpoint {
+							remote-endpoint = <&ss_ucsi_ccg_p0>;
+						};
+					};
+				};
+
+				usb3-1 {
+					nvidia,usb2-companion = <0>;
+					status = "okay";
+
+					port {
+						ss_typec_p1: endpoint {
+							remote-endpoint = <&ss_ucsi_ccg_p1>;
+						};
+					};
+				};
+
+				usb3-2 {
+					nvidia,usb2-companion = <3>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+			phy-names = "usb2-0", "usb3-0";
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
+				    "usb3-0", "usb3-1", "usb3-2";
+		};
+
+		ethernet@6800000 {
+			status = "okay";
+
+			phy-handle = <&mgbe0_phy>;
+			phy-mode = "10gbase-r";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mgbe0_phy: phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		i2c@c240000 {
+			status = "okay";
+
+			typec@8 {
+				compatible = "cypress,cypd4226";
+				reg = <0x08>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>;
+				firmware-name = "nvidia,jetson-agx-xavier";
+				status = "okay";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ccg_typec_con0: connector@0 {
+					compatible = "usb-c-connector";
+					reg = <0>;
+					label = "USB-C";
+					data-role = "host";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							hs_ucsi_ccg_p0: endpoint {
+								remote-endpoint = <&hs_typec_p0>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ss_ucsi_ccg_p0: endpoint {
+								remote-endpoint = <&ss_typec_p0>;
+							};
+						};
+					};
+				};
+
+				ccg_typec_con1: connector@1 {
+					compatible = "usb-c-connector";
+					reg = <1>;
+					label = "USB-C";
+					data-role = "dual";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							hs_ucsi_ccg_p1: endpoint {
+								remote-endpoint = <&hs_typec_p1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ss_ucsi_ccg_p1: endpoint {
+								remote-endpoint = <&ss_typec_p1>;
+							};
+						};
+					};
+				};
+			};
+		};
+
+		pcie@14100000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_3>;
+			phy-names = "p2u-0";
+		};
+
+		pcie@14160000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+			       <&p2u_hsio_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+		};
+
+		pcie@141a0000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+			vpcie3v3-supply = <&vdd_3v3_pcie>;
+			vpcie12v-supply = <&vdd_12v_pcie>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+
+		pcie-ep@141a0000 {
+			status = "disabled";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+
+			reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
+
+			nvidia,refclk-select-gpios = <&gpio_aon
+						      TEGRA234_AON_GPIO(AA, 4)
+						      GPIO_ACTIVE_HIGH>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-suspend {
+			label = "Suspend";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <66 215 255>;
+		pwms = <&pwm3 0 45334>;
+		#cooling-cells = <2>;
+	};
+
+	serial {
+		status = "okay";
+	};
+
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* ADMAIF (FE) Ports */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* XBAR Ports */
+		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>,
+		       <&xbar_i2s6_port>, <&xbar_dmic3_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mix_in1_port>, <&xbar_mix_in2_port>,
+		       <&xbar_mix_in3_port>, <&xbar_mix_in4_port>,
+		       <&xbar_mix_in5_port>, <&xbar_mix_in6_port>,
+		       <&xbar_mix_in7_port>, <&xbar_mix_in8_port>,
+		       <&xbar_mix_in9_port>, <&xbar_mix_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>,
+		       <&mix_out4_port>, <&mix_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* BE I/O Ports */
+		       <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
+		       <&dmic3_port>;
+
+		label = "NVIDIA Jetson AGX Orin APE";
+
+		widgets = "Microphone",	"CVB-RT MIC Jack",
+			  "Microphone",	"CVB-RT MIC",
+			  "Headphone",	"CVB-RT HP Jack",
+			  "Speaker",	"CVB-RT SPK";
+
+		routing = /* I2S1 <-> RT5640 */
+			  "CVB-RT AIF1 Playback",	"I2S1 DAP-Playback",
+			  "I2S1 DAP-Capture",		"CVB-RT AIF1 Capture",
+			  /* RT5640 codec controls */
+			  "CVB-RT HP Jack",		"CVB-RT HPOL",
+			  "CVB-RT HP Jack",		"CVB-RT HPOR",
+			  "CVB-RT IN1P",		"CVB-RT MIC Jack",
+			  "CVB-RT IN2P",		"CVB-RT MIC Jack",
+			  "CVB-RT SPK",			"CVB-RT SPOLP",
+			  "CVB-RT SPK",			"CVB-RT SPORP",
+			  "CVB-RT DMIC1",		"CVB-RT MIC",
+			  "CVB-RT DMIC2",		"CVB-RT MIC";
+	};
+
+	thermal-zones {
+		tj-thermal {
+			cooling-maps {
+				map-active-0 {
+					cooling-device = <&fan 0 1>;
+					trip = <&tj_trip_active0>;
+				};
+
+				map-active-1 {
+					cooling-device = <&fan 1 2>;
+					trip = <&tj_trip_active1>;
+				};
+			};
+		};
+	};
+
+	vdd_1v8_sys: regulator-vdd-1v8-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_SYS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_PCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA234_MAIN_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	vdd_12v_pcie: regulator-vdd-12v-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_12V_PCIE";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
deleted file mode 100644
index eb79e80a9852..000000000000
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/sound/rt5640.h>
-
-/ {
-	compatible = "nvidia,p3737-0000";
-
-	bus@0 {
-		aconnect@2900000 {
-			ahub@2900800 {
-				i2s@2901000 {
-					ports {
-						port@1 {
-							endpoint {
-								dai-format = "i2s";
-								remote-endpoint = <&rt5640_ep>;
-							};
-						};
-					};
-				};
-			};
-		};
-
-		i2c@3160000 {
-			status = "okay";
-
-			eeprom@56 {
-				compatible = "atmel,24c02";
-				reg = <0x56>;
-
-				label = "system";
-				vcc-supply = <&vdd_1v8_sys>;
-				address-width = <8>;
-				pagesize = <8>;
-				size = <256>;
-				read-only;
-			};
-		};
-
-		i2c@31e0000 {
-			status = "okay";
-
-			audio-codec@1c {
-				compatible = "realtek,rt5640";
-				reg = <0x1c>;
-				interrupt-parent = <&gpio>;
-				interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
-				clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
-				clock-names = "mclk";
-				realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
-				realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
-				realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
-				sound-name-prefix = "CVB-RT";
-
-				port {
-					rt5640_ep: endpoint {
-						remote-endpoint = <&i2s1_dap>;
-						mclk-fs = <256>;
-					};
-				};
-			};
-		};
-
-		pwm@3280000 {
-			status = "okay";
-		};
-
-		pwm@32c0000 {
-			status = "okay";
-		};
-
-		pwm@32f0000 {
-			status = "okay";
-		};
-	};
-
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm3 0 45334>;
-		#cooling-cells = <2>;
-	};
-
-	vdd_1v8_sys: regulator-vdd-1v8-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_1V8_SYS";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
index bac611d735c5..9ce55b4d2de8 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
@@ -3,8 +3,8 @@
 
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/sound/rt5640.h>
 #include "tegra234-p3701-0008.dtsi"
-#include "tegra234-p3740-0002.dtsi"
 
 / {
 	model = "NVIDIA IGX Orin Development Kit";
@@ -20,6 +20,32 @@
 	};
 
 	bus@0 {
+		aconnect@2900000 {
+			ahub@2900800 {
+				i2s@2901300 {
+					ports {
+						port@1 {
+							endpoint {
+								dai-format = "i2s";
+								remote-endpoint = <&rt5640_ep>;
+							};
+						};
+					};
+				};
+
+				i2s@2901500 {
+					ports {
+						port@1 {
+							endpoint {
+								bitclock-master;
+								frame-master;
+							};
+						};
+					};
+				};
+			};
+		};
+
 		serial@3100000 {
 			compatible = "nvidia,tegra194-hsuart";
 			reset-names = "serial";
@@ -45,6 +71,40 @@
 		i2c@31c0000 {
 			status = "okay";
 
+			rt5640: audio-codec@1c {
+				compatible = "realtek,rt5640";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA234_MAIN_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+				clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
+				clock-names = "mclk";
+
+				realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
+				realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
+				realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
+
+				sound-name-prefix = "CVB-RT";
+
+				port {
+					rt5640_ep: endpoint {
+						remote-endpoint = <&i2s4_dap>;
+						mclk-fs = <256>;
+					};
+				};
+			};
+
+			/* carrier board ID EEPROM */
+			eeprom@55 {
+				compatible = "atmel,24c02";
+				reg = <0x55>;
+
+				label = "system";
+				vcc-supply = <&vdd_1v8_ls>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
 		};
 
 		i2c@31e0000 {
@@ -60,6 +120,115 @@
 			status = "okay";
 		};
 
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-1 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-2 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-3 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb3-1 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb3-2 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					mode = "otg";
+					usb-role-switch;
+					status = "okay";
+				};
+
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-2 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-3 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb3-0 {
+					nvidia,usb2-companion = <2>;
+					status = "okay";
+				};
+
+				usb3-1 {
+					nvidia,usb2-companion = <0>;
+					status = "okay";
+				};
+
+				usb3-2 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+			phy-names = "usb2-0", "usb3-0";
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys =	<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
+				"usb3-0", "usb3-1", "usb3-2";
+		};
+
 		fuse@3810000 {
 			status = "okay";
 		};
@@ -70,6 +239,37 @@
 
 		i2c@c250000 {
 			status = "okay";
+
+			power-sensor@41 {
+				compatible = "ti,ina3221";
+				reg = <0x41>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				input@0 {
+					reg = <0x0>;
+					label = "CVB_ATX_12V";
+					shunt-resistor-micro-ohms = <2000>;
+				};
+
+				input@1 {
+					reg = <0x1>;
+					label = "CVB_ATX_3V3";
+					shunt-resistor-micro-ohms = <2000>;
+				};
+
+				input@2 {
+					reg = <0x2>;
+					label = "CVB_ATX_5V";
+					shunt-resistor-micro-ohms = <2000>;
+				};
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina219";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
 		};
 
 		host1x@13e00000 {
@@ -102,6 +302,16 @@
 		};
 
 		pcie@141a0000 {
+			reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
+			       0x00 0x3a000000 0x0 0x00040000   /* configuration space (256K) */
+			       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+			       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
+			       0x2e 0x20000000 0x0 0x10000000>; /* ECAM (256MB)               */
+
+			ranges = <0x81000000 0x00 0x3a100000 0x00 0x3a100000 0x0 0x00100000      /* downstream I/O (1MB) */
+				  0x82000000 0x00 0x40000000 0x2e 0x30000000 0x0 0x08000000      /* non-prefetchable memory (128MB) */
+				  0xc3000000 0x28 0x00000000 0x28 0x00000000 0x6 0x20000000>;    /* prefetchable memory (25088MB) */
+
 			status = "okay";
 			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
 			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
@@ -235,4 +445,32 @@
 			  "CVB-RT DMIC1",		"CVB-RT MIC",
 			  "CVB-RT DMIC2",		"CVB-RT MIC";
 	};
+
+	vdd_3v3_dp: regulator-vdd-3v3-dp {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_DP";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_sys>;
+		gpio = <&gpio TEGRA234_MAIN_GPIO(H, 6) 0>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_3v3_wifi: regulator-vdd-3v3-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_WIFI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA234_MAIN_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi
deleted file mode 100644
index 527f2f3aee3a..000000000000
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi
+++ /dev/null
@@ -1,215 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/sound/rt5640.h>
-
-/ {
-	compatible = "nvidia,p3740-0002";
-
-	bus@0 {
-		aconnect@2900000 {
-			ahub@2900800 {
-				i2s@2901300 {
-					ports {
-						port@1 {
-							endpoint {
-								dai-format = "i2s";
-								remote-endpoint = <&rt5640_ep>;
-							};
-						};
-					};
-				};
-
-				i2s@2901500 {
-					ports {
-						port@1 {
-							endpoint {
-								bitclock-master;
-								frame-master;
-							};
-						};
-					};
-				};
-			};
-		};
-
-		i2c@31c0000 {
-			rt5640: audio-codec@1c {
-				compatible = "realtek,rt5640";
-				reg = <0x1c>;
-				interrupt-parent = <&gpio>;
-				interrupts = <TEGRA234_MAIN_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
-				clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
-				clock-names = "mclk";
-
-				realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
-				realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
-				realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
-
-				sound-name-prefix = "CVB-RT";
-
-				port {
-					rt5640_ep: endpoint {
-						remote-endpoint = <&i2s4_dap>;
-						mclk-fs = <256>;
-					};
-				};
-			};
-
-			/* carrier board ID EEPROM */
-			eeprom@55 {
-				compatible = "atmel,24c02";
-				reg = <0x55>;
-
-				label = "system";
-				vcc-supply = <&vdd_1v8_ls>;
-				address-width = <8>;
-				pagesize = <8>;
-				size = <256>;
-				read-only;
-			};
-		};
-
-		padctl@3520000 {
-			vclamp-usb-supply = <&vdd_1v8_ao>;
-			avdd-usb-supply = <&vdd_3v3_ao>;
-			status = "okay";
-
-			pads {
-				usb2 {
-					lanes {
-						usb2-0 {
-							nvidia,function = "xusb";
-							status = "okay";
-						};
-
-						usb2-1 {
-							nvidia,function = "xusb";
-							status = "okay";
-						};
-
-						usb2-2 {
-							nvidia,function = "xusb";
-							status = "okay";
-						};
-
-						usb2-3 {
-							nvidia,function = "xusb";
-							status = "okay";
-						};
-					};
-				};
-
-				usb3 {
-					lanes {
-						usb3-0 {
-							nvidia,function = "xusb";
-							status = "okay";
-						};
-
-						usb3-1 {
-							nvidia,function = "xusb";
-							status = "okay";
-						};
-
-						usb3-2 {
-							nvidia,function = "xusb";
-							status = "okay";
-						};
-					};
-				};
-			};
-
-			ports {
-				usb2-0 {
-					mode = "otg";
-					usb-role-switch;
-					status = "okay";
-					vbus-supply = <&vdd_5v0_sys>;
-				};
-
-				usb2-1 {
-					mode = "host";
-					status = "okay";
-					vbus-supply = <&vdd_5v0_sys>;
-				};
-
-				usb2-2 {
-					mode = "host";
-					status = "okay";
-					vbus-supply = <&vdd_5v0_sys>;
-				};
-
-				usb2-3 {
-					mode = "host";
-					status = "okay";
-					vbus-supply = <&vdd_5v0_sys>;
-				};
-
-				usb3-0 {
-					nvidia,usb2-companion = <2>;
-					status = "okay";
-				};
-
-				usb3-1 {
-					nvidia,usb2-companion = <0>;
-					status = "okay";
-				};
-
-				usb3-2 {
-					nvidia,usb2-companion = <1>;
-					status = "okay";
-				};
-			};
-		};
-
-		usb@3550000 {
-			status = "okay";
-
-			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
-				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
-			phy-names = "usb2-0", "usb3-0";
-		};
-
-		usb@3610000 {
-			status = "okay";
-
-			phys =	<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
-				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
-				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
-				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
-				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
-				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
-				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
-			phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
-				"usb3-0", "usb3-1", "usb3-2";
-		};
-	};
-
-	vdd_3v3_dp: regulator-vdd-3v3-dp {
-				compatible = "regulator-fixed";
-				regulator-name = "VDD_3V3_DP";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				vin-supply = <&vdd_3v3_sys>;
-				gpio = <&gpio TEGRA234_MAIN_GPIO(H, 6) 0>;
-				enable-active-high;
-				regulator-always-on;
-	};
-
-	vdd_3v3_sys: regulator-vdd-3v3-sys {
-				compatible = "regulator-fixed";
-				regulator-name = "VDD_3V3_SYS";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-	};
-
-	vdd_3v3_wifi: regulator-vdd-3v3-wifi {
-				compatible = "regulator-fixed";
-				regulator-name = "VDD_3V3_WIFI";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				gpio = <&gpio TEGRA234_MAIN_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
-				regulator-boot-on;
-				enable-active-high;
-	};
-};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi
deleted file mode 100644
index baf4f69e410d..000000000000
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include "tegra234-p3767.dtsi"
-
-/ {
-	compatible = "nvidia,p3767-0000", "nvidia,tegra234";
-	model = "NVIDIA Jetson Orin NX";
-
-	bus@0 {
-		hda@3510000 {
-			nvidia,model = "NVIDIA Jetson Orin NX HDA";
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi
deleted file mode 100644
index 232fa95ef4ae..000000000000
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include "tegra234-p3767.dtsi"
-
-/ {
-	compatible = "nvidia,p3767-0005", "nvidia,tegra234";
-	model = "NVIDIA Jetson Orin Nano";
-
-	bus@0 {
-		hda@3510000 {
-			nvidia,model = "NVIDIA Jetson Orin Nano HDA";
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
index 59c14ded5e9f..84db7132e8fc 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
@@ -5,7 +5,35 @@
 / {
 	compatible = "nvidia,p3767", "nvidia,tegra234";
 
+	aliases {
+		mmc0 = "/bus@0/mmc@3400000";
+	};
+
 	bus@0 {
+		aconnect@2900000 {
+			status = "okay";
+
+			ahub@2900800 {
+				status = "okay";
+
+				i2s@2901100 {
+					status = "okay";
+				};
+
+				i2s@2901300 {
+					status = "okay";
+				};
+			};
+
+			dma-controller@2930000 {
+				status = "okay";
+			};
+
+			interrupt-controller@2a40000 {
+				status = "okay";
+			};
+		};
+
 		i2c@3160000 {
 			status = "okay";
 
@@ -127,6 +155,64 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* ADMAIF (FE) Ports */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* XBAR Ports */
+		       <&xbar_i2s2_port>, <&xbar_i2s4_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mix_in1_port>, <&xbar_mix_in2_port>,
+		       <&xbar_mix_in3_port>, <&xbar_mix_in4_port>,
+		       <&xbar_mix_in5_port>, <&xbar_mix_in6_port>,
+		       <&xbar_mix_in7_port>, <&xbar_mix_in8_port>,
+		       <&xbar_mix_in9_port>, <&xbar_mix_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>,
+		       <&mix_out4_port>, <&mix_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* BE I/O Ports */
+		       <&i2s2_port>, <&i2s4_port>;
+	};
+
 	thermal-zones {
 		tj-thermal {
 			polling-delay = <1000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts
index 61b0e69d3d20..5dc974bb360c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts
@@ -1,108 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/input/gpio-keys.h>
-
-#include "tegra234-p3767-0000.dtsi"
-#include "tegra234-p3768-0000.dtsi"
+#include "tegra234-p3768-0000+p3767.dtsi"
 
 / {
 	compatible = "nvidia,p3768-0000+p3767-0000", "nvidia,p3767-0000", "nvidia,tegra234";
 	model = "NVIDIA Jetson Orin NX Engineering Reference Developer Kit";
 
-	aliases {
-		serial1 = &uarta;
-		serial2 = &uarte;
-	};
-
 	bus@0 {
-		serial@3100000 {
-			compatible = "nvidia,tegra194-hsuart";
-			reset-names = "serial";
-			status = "okay";
-		};
-
-		serial@3140000 {
-			compatible = "nvidia,tegra194-hsuart";
-			reset-names = "serial";
-			status = "okay";
-		};
-
-		pwm@32a0000 {
-			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
-			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
-			status = "okay";
-		};
-
 		hda@3510000 {
 			nvidia,model = "NVIDIA Jetson Orin NX HDA";
-			status = "okay";
-		};
-
-		padctl@3520000 {
-			status = "okay";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-force-recovery {
-			label = "Force Recovery";
-			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <BTN_1>;
-		};
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_POWER>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		key-suspend {
-			label = "Suspend";
-			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_SLEEP>;
 		};
 	};
 
-	pwm-fan {
-		cooling-levels = <0 88 187 255>;
-	};
-
-	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_3V3_PCIE";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio_aon TEGRA234_AON_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	thermal-zones {
-		tj-thermal {
-			cooling-maps {
-				map-active-0 {
-					cooling-device = <&fan 0 1>;
-					trip = <&tj_trip_active0>;
-				};
-
-				map-active-1 {
-					cooling-device = <&fan 1 2>;
-					trip = <&tj_trip_active1>;
-				};
-
-				map-active-2 {
-					cooling-device = <&fan 2 3>;
-					trip = <&tj_trip_active2>;
-				};
-			};
-		};
+	sound {
+		label = "NVIDIA Jetson Orin NX APE";
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts
index 9e9bb9ca8be4..9f5e07012b87 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts
@@ -1,38 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/input/gpio-keys.h>
-
-#include "tegra234-p3767-0005.dtsi"
-#include "tegra234-p3768-0000.dtsi"
+#include "tegra234-p3768-0000+p3767.dtsi"
 
 / {
 	compatible = "nvidia,p3768-0000+p3767-0005", "nvidia,p3767-0005", "nvidia,tegra234";
 	model = "NVIDIA Jetson Orin Nano Developer Kit";
 
-	pwm-fan {
-		cooling-levels = <0 88 187 255>;
+	bus@0 {
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson Orin Nano HDA";
+		};
 	};
 
-	thermal-zones {
-		tj-thermal {
-			cooling-maps {
-				map-active-0 {
-					cooling-device = <&fan 0 1>;
-					trip = <&tj_trip_active0>;
-				};
-
-				map-active-1 {
-					cooling-device = <&fan 1 2>;
-					trip = <&tj_trip_active1>;
-				};
-
-				map-active-2 {
-					cooling-device = <&fan 2 3>;
-					trip = <&tj_trip_active2>;
-				};
-			};
-		};
+	sound {
+		label = "NVIDIA Jetson Orin Nano APE";
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi
index 5d0298b6c30d..41821354bbda 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi
@@ -1,10 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0
 
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra234-p3767.dtsi"
+
 / {
-	compatible = "nvidia,p3768-0000";
 
 	aliases {
 		serial0 = &tcu;
+		serial1 = &uarta;
+		serial2 = &uarte;
 	};
 
 	chosen {
@@ -12,6 +18,18 @@
 	};
 
 	bus@0 {
+		serial@3100000 {
+			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
+			status = "okay";
+		};
+
+		serial@3140000 {
+			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
+			status = "okay";
+		};
+
 		i2c@3160000 {
 			status = "okay";
 
@@ -168,6 +186,18 @@
 			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
 		};
 
+		pcie-ep@14160000 {/* C4 - End Point */
+			phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+					<&p2u_hsio_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+			reset-gpios = <&gpio
+					TEGRA234_MAIN_GPIO(L, 1)
+					GPIO_ACTIVE_LOW>;
+			nvidia,refclk-select-gpios = <&gpio_aon
+							TEGRA234_AON_GPIO(AA, 4)
+							GPIO_ACTIVE_HIGH>;
+		};
+
 		/* C7 - M.2 Key-M */
 		pcie@141e0000 {
 			status = "okay";
@@ -197,19 +227,13 @@
 			wakeup-event-action = <EV_ACT_ASSERTED>;
 			wakeup-source;
 		};
-
-		key-suspend {
-			label = "Suspend";
-			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_SLEEP>;
-		};
 	};
 
 	fan: pwm-fan {
 		compatible = "pwm-fan";
 		pwms = <&pwm3 0 45334>;
 		#cooling-cells = <2>;
+		cooling-levels = <0 88 187 255>;
 	};
 
 	vdd_1v8_sys: regulator-vdd-1v8-sys {
@@ -241,4 +265,25 @@
 	serial {
 		status = "okay";
 	};
+
+	thermal-zones {
+		tj-thermal {
+			cooling-maps {
+				map-active-0 {
+					cooling-device = <&fan 0 1>;
+					trip = <&tj_trip_active0>;
+				};
+
+				map-active-1 {
+					cooling-device = <&fan 1 2>;
+					trip = <&tj_trip_active1>;
+				};
+
+				map-active-2 {
+					cooling-device = <&fan 2 3>;
+					trip = <&tj_trip_active2>;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
index 9f3e9f30c3f7..292e28376eec 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
@@ -8,7 +8,6 @@
 	compatible = "nvidia,tegra234-vdk", "nvidia,tegra234";
 
 	aliases {
-		mmc3 = "/bus@0/mmc@3460000";
 		serial0 = &uarta;
 	};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 3f16595d099c..df034dbb8285 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -16,6 +16,18 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &gen1_i2c;
+		i2c1 = &gen2_i2c;
+		i2c2 = &cam_i2c;
+		i2c3 = &dp_aux_ch1_i2c;
+		i2c4 = &bpmp_i2c;
+		i2c5 = &dp_aux_ch0_i2c;
+		i2c6 = &dp_aux_ch2_i2c;
+		i2c7 = &gen8_i2c;
+		i2c8 = &dp_aux_ch3_i2c;
+	};
+
 	bus@0 {
 		compatible = "simple-bus";
 
@@ -200,6 +212,28 @@
 					assigned-clock-rates = <1536000>;
 					sound-name-prefix = "I2S1";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s1_cif: endpoint {
+								remote-endpoint = <&xbar_i2s1>;
+							};
+						};
+
+						i2s1_port: port@1 {
+							reg = <1>;
+
+							i2s1_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_i2s2: i2s@2901100 {
@@ -214,6 +248,28 @@
 					assigned-clock-rates = <1536000>;
 					sound-name-prefix = "I2S2";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s2_cif: endpoint {
+								remote-endpoint = <&xbar_i2s2>;
+							};
+						};
+
+						i2s2_port: port@1 {
+							reg = <1>;
+
+							i2s2_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_i2s3: i2s@2901200 {
@@ -228,6 +284,28 @@
 					assigned-clock-rates = <1536000>;
 					sound-name-prefix = "I2S3";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s3_cif: endpoint {
+								remote-endpoint = <&xbar_i2s3>;
+							};
+						};
+
+						i2s3_port: port@1 {
+							reg = <1>;
+
+							i2s3_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_i2s4: i2s@2901300 {
@@ -242,6 +320,28 @@
 					assigned-clock-rates = <1536000>;
 					sound-name-prefix = "I2S4";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s4_cif: endpoint {
+								remote-endpoint = <&xbar_i2s4>;
+							};
+						};
+
+						i2s4_port: port@1 {
+							reg = <1>;
+
+							i2s4_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_i2s5: i2s@2901400 {
@@ -256,6 +356,28 @@
 					assigned-clock-rates = <1536000>;
 					sound-name-prefix = "I2S5";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s5_cif: endpoint {
+								remote-endpoint = <&xbar_i2s5>;
+							};
+						};
+
+						i2s5_port: port@1 {
+							reg = <1>;
+
+							i2s5_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_i2s6: i2s@2901500 {
@@ -270,6 +392,28 @@
 					assigned-clock-rates = <1536000>;
 					sound-name-prefix = "I2S6";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s6_cif: endpoint {
+								remote-endpoint = <&xbar_i2s6>;
+							};
+						};
+
+						i2s6_port: port@1 {
+							reg = <1>;
+
+							i2s6_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_sfc1: sfc@2902000 {
@@ -277,7 +421,27 @@
 						     "nvidia,tegra210-sfc";
 					reg = <0x0 0x2902000 0x0 0x200>;
 					sound-name-prefix = "SFC1";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc1_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc1_in>;
+							};
+						};
+
+						sfc1_out_port: port@1 {
+							reg = <1>;
+
+							sfc1_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc1_out>;
+							};
+						};
+					};
 				};
 
 				tegra_sfc2: sfc@2902200 {
@@ -285,7 +449,27 @@
 						     "nvidia,tegra210-sfc";
 					reg = <0x0 0x2902200 0x0 0x200>;
 					sound-name-prefix = "SFC2";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc2_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc2_in>;
+							};
+						};
+
+						sfc2_out_port: port@1 {
+							reg = <1>;
+
+							sfc2_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc2_out>;
+							};
+						};
+					};
 				};
 
 				tegra_sfc3: sfc@2902400 {
@@ -293,7 +477,27 @@
 						     "nvidia,tegra210-sfc";
 					reg = <0x0 0x2902400 0x0 0x200>;
 					sound-name-prefix = "SFC3";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc3_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc3_in>;
+							};
+						};
+
+						sfc3_out_port: port@1 {
+							reg = <1>;
+
+							sfc3_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc3_out>;
+							};
+						};
+					};
 				};
 
 				tegra_sfc4: sfc@2902600 {
@@ -301,7 +505,27 @@
 						     "nvidia,tegra210-sfc";
 					reg = <0x0 0x2902600 0x0 0x200>;
 					sound-name-prefix = "SFC4";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc4_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc4_in>;
+							};
+						};
+
+						sfc4_out_port: port@1 {
+							reg = <1>;
+
+							sfc4_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc4_out>;
+							};
+						};
+					};
 				};
 
 				tegra_amx1: amx@2903000 {
@@ -309,7 +533,51 @@
 						     "nvidia,tegra194-amx";
 					reg = <0x0 0x2903000 0x0 0x100>;
 					sound-name-prefix = "AMX1";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx1_in1: endpoint {
+								remote-endpoint = <&xbar_amx1_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx1_in2: endpoint {
+								remote-endpoint = <&xbar_amx1_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx1_in3: endpoint {
+								remote-endpoint = <&xbar_amx1_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx1_in4: endpoint {
+								remote-endpoint = <&xbar_amx1_in4>;
+							};
+						};
+
+						amx1_out_port: port@4 {
+							reg = <4>;
+
+							amx1_out: endpoint {
+								remote-endpoint = <&xbar_amx1_out>;
+							};
+						};
+					};
 				};
 
 				tegra_amx2: amx@2903100 {
@@ -317,7 +585,51 @@
 						     "nvidia,tegra194-amx";
 					reg = <0x0 0x2903100 0x0 0x100>;
 					sound-name-prefix = "AMX2";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx2_in1: endpoint {
+								remote-endpoint = <&xbar_amx2_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx2_in2: endpoint {
+								remote-endpoint = <&xbar_amx2_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx2_in3: endpoint {
+								remote-endpoint = <&xbar_amx2_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx2_in4: endpoint {
+								remote-endpoint = <&xbar_amx2_in4>;
+							};
+						};
+
+						amx2_out_port: port@4 {
+							reg = <4>;
+
+							amx2_out: endpoint {
+								remote-endpoint = <&xbar_amx2_out>;
+							};
+						};
+					};
 				};
 
 				tegra_amx3: amx@2903200 {
@@ -325,7 +637,51 @@
 						     "nvidia,tegra194-amx";
 					reg = <0x0 0x2903200 0x0 0x100>;
 					sound-name-prefix = "AMX3";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx3_in1: endpoint {
+								remote-endpoint = <&xbar_amx3_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx3_in2: endpoint {
+								remote-endpoint = <&xbar_amx3_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx3_in3: endpoint {
+								remote-endpoint = <&xbar_amx3_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx3_in4: endpoint {
+								remote-endpoint = <&xbar_amx3_in4>;
+							};
+						};
+
+						amx3_out_port: port@4 {
+							reg = <4>;
+
+							amx3_out: endpoint {
+								remote-endpoint = <&xbar_amx3_out>;
+							};
+						};
+					};
 				};
 
 				tegra_amx4: amx@2903300 {
@@ -333,7 +689,51 @@
 						     "nvidia,tegra194-amx";
 					reg = <0x0 0x2903300 0x0 0x100>;
 					sound-name-prefix = "AMX4";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx4_in1: endpoint {
+								remote-endpoint = <&xbar_amx4_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx4_in2: endpoint {
+								remote-endpoint = <&xbar_amx4_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx4_in3: endpoint {
+								remote-endpoint = <&xbar_amx4_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx4_in4: endpoint {
+								remote-endpoint = <&xbar_amx4_in4>;
+							};
+						};
+
+						amx4_out_port: port@4 {
+							reg = <4>;
+
+							amx4_out: endpoint {
+								remote-endpoint = <&xbar_amx4_out>;
+							};
+						};
+					};
 				};
 
 				tegra_adx1: adx@2903800 {
@@ -341,7 +741,51 @@
 						     "nvidia,tegra210-adx";
 					reg = <0x0 0x2903800 0x0 0x100>;
 					sound-name-prefix = "ADX1";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx1_in: endpoint {
+								remote-endpoint = <&xbar_adx1_in>;
+							};
+						};
+
+						adx1_out1_port: port@1 {
+							reg = <1>;
+
+							adx1_out1: endpoint {
+								remote-endpoint = <&xbar_adx1_out1>;
+							};
+						};
+
+						adx1_out2_port: port@2 {
+							reg = <2>;
+
+							adx1_out2: endpoint {
+								remote-endpoint = <&xbar_adx1_out2>;
+							};
+						};
+
+						adx1_out3_port: port@3 {
+							reg = <3>;
+
+							adx1_out3: endpoint {
+								remote-endpoint = <&xbar_adx1_out3>;
+							};
+						};
+
+						adx1_out4_port: port@4 {
+							reg = <4>;
+
+							adx1_out4: endpoint {
+								remote-endpoint = <&xbar_adx1_out4>;
+							};
+						};
+					};
 				};
 
 				tegra_adx2: adx@2903900 {
@@ -349,7 +793,51 @@
 						     "nvidia,tegra210-adx";
 					reg = <0x0 0x2903900 0x0 0x100>;
 					sound-name-prefix = "ADX2";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx2_in: endpoint {
+								remote-endpoint = <&xbar_adx2_in>;
+							};
+						};
+
+						adx2_out1_port: port@1 {
+							reg = <1>;
+
+							adx2_out1: endpoint {
+								remote-endpoint = <&xbar_adx2_out1>;
+							};
+						};
+
+						adx2_out2_port: port@2 {
+							reg = <2>;
+
+							adx2_out2: endpoint {
+								remote-endpoint = <&xbar_adx2_out2>;
+							};
+						};
+
+						adx2_out3_port: port@3 {
+							reg = <3>;
+
+							adx2_out3: endpoint {
+								remote-endpoint = <&xbar_adx2_out3>;
+							};
+						};
+
+						adx2_out4_port: port@4 {
+							reg = <4>;
+
+							adx2_out4: endpoint {
+								remote-endpoint = <&xbar_adx2_out4>;
+							};
+						};
+					};
 				};
 
 				tegra_adx3: adx@2903a00 {
@@ -357,7 +845,51 @@
 						     "nvidia,tegra210-adx";
 					reg = <0x0 0x2903a00 0x0 0x100>;
 					sound-name-prefix = "ADX3";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx3_in: endpoint {
+								remote-endpoint = <&xbar_adx3_in>;
+							};
+						};
+
+						adx3_out1_port: port@1 {
+							reg = <1>;
+
+							adx3_out1: endpoint {
+								remote-endpoint = <&xbar_adx3_out1>;
+							};
+						};
+
+						adx3_out2_port: port@2 {
+							reg = <2>;
+
+							adx3_out2: endpoint {
+								remote-endpoint = <&xbar_adx3_out2>;
+							};
+						};
+
+						adx3_out3_port: port@3 {
+							reg = <3>;
+
+							adx3_out3: endpoint {
+								remote-endpoint = <&xbar_adx3_out3>;
+							};
+						};
+
+						adx3_out4_port: port@4 {
+							reg = <4>;
+
+							adx3_out4: endpoint {
+								remote-endpoint = <&xbar_adx3_out4>;
+							};
+						};
+					};
 				};
 
 				tegra_adx4: adx@2903b00 {
@@ -365,7 +897,51 @@
 						     "nvidia,tegra210-adx";
 					reg = <0x0 0x2903b00 0x0 0x100>;
 					sound-name-prefix = "ADX4";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx4_in: endpoint {
+								remote-endpoint = <&xbar_adx4_in>;
+							};
+						};
+
+						adx4_out1_port: port@1 {
+							reg = <1>;
+
+							adx4_out1: endpoint {
+								remote-endpoint = <&xbar_adx4_out1>;
+							};
+						};
+
+						adx4_out2_port: port@2 {
+							reg = <2>;
+
+							adx4_out2: endpoint {
+								remote-endpoint = <&xbar_adx4_out2>;
+							};
+						};
+
+						adx4_out3_port: port@3 {
+							reg = <3>;
+
+							adx4_out3: endpoint {
+								remote-endpoint = <&xbar_adx4_out3>;
+							};
+						};
+
+						adx4_out4_port: port@4 {
+							reg = <4>;
+
+							adx4_out4: endpoint {
+								remote-endpoint = <&xbar_adx4_out4>;
+							};
+						};
+					};
 				};
 
 
@@ -380,6 +956,27 @@
 					assigned-clock-rates = <3072000>;
 					sound-name-prefix = "DMIC1";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic1_cif: endpoint {
+								remote-endpoint = <&xbar_dmic1>;
+							};
+						};
+
+						dmic1_port: port@1 {
+							reg = <1>;
+
+							dmic1_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_dmic2: dmic@2904100 {
@@ -393,6 +990,27 @@
 					assigned-clock-rates = <3072000>;
 					sound-name-prefix = "DMIC2";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic2_cif: endpoint {
+								remote-endpoint = <&xbar_dmic2>;
+							};
+						};
+
+						dmic2_port: port@1 {
+							reg = <1>;
+
+							dmic2_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_dmic3: dmic@2904200 {
@@ -406,6 +1024,27 @@
 					assigned-clock-rates = <3072000>;
 					sound-name-prefix = "DMIC3";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic3_cif: endpoint {
+								remote-endpoint = <&xbar_dmic3>;
+							};
+						};
+
+						dmic3_port: port@1 {
+							reg = <1>;
+
+							dmic3_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_dmic4: dmic@2904300 {
@@ -419,6 +1058,27 @@
 					assigned-clock-rates = <3072000>;
 					sound-name-prefix = "DMIC4";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic4_cif: endpoint {
+								remote-endpoint = <&xbar_dmic4>;
+							};
+						};
+
+						dmic4_port: port@1 {
+							reg = <1>;
+
+							dmic4_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_dspk1: dspk@2905000 {
@@ -432,6 +1092,27 @@
 					assigned-clock-rates = <12288000>;
 					sound-name-prefix = "DSPK1";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dspk1_cif: endpoint {
+								remote-endpoint = <&xbar_dspk1>;
+							};
+						};
+
+						dspk1_port: port@1 {
+							reg = <1>;
+
+							dspk1_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_dspk2: dspk@2905100 {
@@ -445,6 +1126,27 @@
 					assigned-clock-rates = <12288000>;
 					sound-name-prefix = "DSPK2";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dspk2_cif: endpoint {
+								remote-endpoint = <&xbar_dspk2>;
+							};
+						};
+
+						dspk2_port: port@1 {
+							reg = <1>;
+
+							dspk2_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_ope1: processing-engine@2908000 {
@@ -452,7 +1154,6 @@
 						     "nvidia,tegra210-ope";
 					reg = <0x0 0x2908000 0x0 0x100>;
 					sound-name-prefix = "OPE1";
-					status = "disabled";
 
 					#address-cells = <2>;
 					#size-cells = <2>;
@@ -469,6 +1170,29 @@
 							     "nvidia,tegra210-mbdrc";
 						reg = <0x0 0x2908200 0x0 0x200>;
 					};
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							ope1_cif_in_ep: endpoint {
+								remote-endpoint =
+									<&xbar_ope1_in_ep>;
+							};
+						};
+
+						ope1_out_port: port@1 {
+							reg = <0x1>;
+
+							ope1_cif_out_ep: endpoint {
+								remote-endpoint =
+									<&xbar_ope1_out_ep>;
+							};
+						};
+					};
 				};
 
 				tegra_mvc1: mvc@290a000 {
@@ -476,7 +1200,27 @@
 						     "nvidia,tegra210-mvc";
 					reg = <0x0 0x290a000 0x0 0x200>;
 					sound-name-prefix = "MVC1";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc1_cif_in: endpoint {
+								remote-endpoint = <&xbar_mvc1_in>;
+							};
+						};
+
+						mvc1_out_port: port@1 {
+							reg = <1>;
+
+							mvc1_cif_out: endpoint {
+								remote-endpoint = <&xbar_mvc1_out>;
+							};
+						};
+					};
 				};
 
 				tegra_mvc2: mvc@290a200 {
@@ -484,7 +1228,27 @@
 						     "nvidia,tegra210-mvc";
 					reg = <0x0 0x290a200 0x0 0x200>;
 					sound-name-prefix = "MVC2";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc2_cif_in: endpoint {
+								remote-endpoint = <&xbar_mvc2_in>;
+							};
+						};
+
+						mvc2_out_port: port@1 {
+							reg = <1>;
+
+							mvc2_cif_out: endpoint {
+								remote-endpoint = <&xbar_mvc2_out>;
+							};
+						};
+					};
 				};
 
 				tegra_amixer: amixer@290bb00 {
@@ -492,7 +1256,131 @@
 						     "nvidia,tegra210-amixer";
 					reg = <0x0 0x290bb00 0x0 0x800>;
 					sound-name-prefix = "MIXER1";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							mix_in1: endpoint {
+								remote-endpoint = <&xbar_mix_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							mix_in2: endpoint {
+								remote-endpoint = <&xbar_mix_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							mix_in3: endpoint {
+								remote-endpoint = <&xbar_mix_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							mix_in4: endpoint {
+								remote-endpoint = <&xbar_mix_in4>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							mix_in5: endpoint {
+								remote-endpoint = <&xbar_mix_in5>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							mix_in6: endpoint {
+								remote-endpoint = <&xbar_mix_in6>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							mix_in7: endpoint {
+								remote-endpoint = <&xbar_mix_in7>;
+							};
+						};
+
+						port@7 {
+							reg = <0x7>;
+
+							mix_in8: endpoint {
+								remote-endpoint = <&xbar_mix_in8>;
+							};
+						};
+
+						port@8 {
+							reg = <0x8>;
+
+							mix_in9: endpoint {
+								remote-endpoint = <&xbar_mix_in9>;
+							};
+						};
+
+						port@9 {
+							reg = <0x9>;
+
+							mix_in10: endpoint {
+								remote-endpoint = <&xbar_mix_in10>;
+							};
+						};
+
+						mix_out1_port: port@a {
+							reg = <0xa>;
+
+							mix_out1: endpoint {
+								remote-endpoint = <&xbar_mix_out1>;
+							};
+						};
+
+						mix_out2_port: port@b {
+							reg = <0xb>;
+
+							mix_out2: endpoint {
+								remote-endpoint = <&xbar_mix_out2>;
+							};
+						};
+
+						mix_out3_port: port@c {
+							reg = <0xc>;
+
+							mix_out3: endpoint {
+								remote-endpoint = <&xbar_mix_out3>;
+							};
+						};
+
+						mix_out4_port: port@d {
+							reg = <0xd>;
+
+							mix_out4: endpoint {
+								remote-endpoint = <&xbar_mix_out4>;
+							};
+						};
+
+						mix_out5_port: port@e {
+							reg = <0xe>;
+
+							mix_out5: endpoint {
+								remote-endpoint = <&xbar_mix_out5>;
+							};
+						};
+					};
 				};
 
 				tegra_admaif: admaif@290f000 {
@@ -543,7 +1431,171 @@
 							<&mc TEGRA234_MEMORY_CLIENT_APEDMAW &emc>;
 					interconnect-names = "dma-mem", "write";
 					iommus = <&smmu_niso0 TEGRA234_SID_APE>;
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						admaif0_port: port@0 {
+							reg = <0x0>;
+
+							admaif0: endpoint {
+								remote-endpoint = <&xbar_admaif0>;
+							};
+						};
+
+						admaif1_port: port@1 {
+							reg = <0x1>;
+
+							admaif1: endpoint {
+								remote-endpoint = <&xbar_admaif1>;
+							};
+						};
+
+						admaif2_port: port@2 {
+							reg = <0x2>;
+
+							admaif2: endpoint {
+								remote-endpoint = <&xbar_admaif2>;
+							};
+						};
+
+						admaif3_port: port@3 {
+							reg = <0x3>;
+
+							admaif3: endpoint {
+								remote-endpoint = <&xbar_admaif3>;
+							};
+						};
+
+						admaif4_port: port@4 {
+							reg = <0x4>;
+
+							admaif4: endpoint {
+								remote-endpoint = <&xbar_admaif4>;
+							};
+						};
+
+						admaif5_port: port@5 {
+							reg = <0x5>;
+
+							admaif5: endpoint {
+								remote-endpoint = <&xbar_admaif5>;
+							};
+						};
+
+						admaif6_port: port@6 {
+							reg = <0x6>;
+
+							admaif6: endpoint {
+								remote-endpoint = <&xbar_admaif6>;
+							};
+						};
+
+						admaif7_port: port@7 {
+							reg = <0x7>;
+
+							admaif7: endpoint {
+								remote-endpoint = <&xbar_admaif7>;
+							};
+						};
+
+						admaif8_port: port@8 {
+							reg = <0x8>;
+
+							admaif8: endpoint {
+								remote-endpoint = <&xbar_admaif8>;
+							};
+						};
+
+						admaif9_port: port@9 {
+							reg = <0x9>;
+
+							admaif9: endpoint {
+								remote-endpoint = <&xbar_admaif9>;
+							};
+						};
+
+						admaif10_port: port@a {
+							reg = <0xa>;
+
+							admaif10: endpoint {
+								remote-endpoint = <&xbar_admaif10>;
+							};
+						};
+
+						admaif11_port: port@b {
+							reg = <0xb>;
+
+							admaif11: endpoint {
+								remote-endpoint = <&xbar_admaif11>;
+							};
+						};
+
+						admaif12_port: port@c {
+							reg = <0xc>;
+
+							admaif12: endpoint {
+								remote-endpoint = <&xbar_admaif12>;
+							};
+						};
+
+						admaif13_port: port@d {
+							reg = <0xd>;
+
+							admaif13: endpoint {
+								remote-endpoint = <&xbar_admaif13>;
+							};
+						};
+
+						admaif14_port: port@e {
+							reg = <0xe>;
+
+							admaif14: endpoint {
+								remote-endpoint = <&xbar_admaif14>;
+							};
+						};
+
+						admaif15_port: port@f {
+							reg = <0xf>;
+
+							admaif15: endpoint {
+								remote-endpoint = <&xbar_admaif15>;
+							};
+						};
+
+						admaif16_port: port@10 {
+							reg = <0x10>;
+
+							admaif16: endpoint {
+								remote-endpoint = <&xbar_admaif16>;
+							};
+						};
+
+						admaif17_port: port@11 {
+							reg = <0x11>;
+
+							admaif17: endpoint {
+								remote-endpoint = <&xbar_admaif17>;
+							};
+						};
+
+						admaif18_port: port@12 {
+							reg = <0x12>;
+
+							admaif18: endpoint {
+								remote-endpoint = <&xbar_admaif18>;
+							};
+						};
+
+						admaif19_port: port@13 {
+							reg = <0x13>;
+
+							admaif19: endpoint {
+								remote-endpoint = <&xbar_admaif19>;
+							};
+						};
+					};
 				};
 
 				tegra_asrc: asrc@2910000 {
@@ -551,7 +1603,1045 @@
 						     "nvidia,tegra186-asrc";
 					reg = <0x0 0x2910000 0x0 0x2000>;
 					sound-name-prefix = "ASRC1";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							asrc_in1_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							asrc_in2_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							asrc_in3_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							asrc_in4_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							asrc_in5_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							asrc_in6_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							asrc_in7_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in7_ep>;
+							};
+						};
+
+						asrc_out1_port: port@7 {
+							reg = <0x7>;
+
+							asrc_out1_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out1_ep>;
+							};
+						};
+
+						asrc_out2_port: port@8 {
+							reg = <0x8>;
+
+							asrc_out2_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out2_ep>;
+							};
+						};
+
+						asrc_out3_port: port@9 {
+							reg = <0x9>;
+
+							asrc_out3_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out3_ep>;
+							};
+						};
+
+						asrc_out4_port: port@a {
+							reg = <0xa>;
+
+							asrc_out4_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out4_ep>;
+							};
+						};
+
+						asrc_out5_port: port@b {
+							reg = <0xb>;
+
+							asrc_out5_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out5_ep>;
+							};
+						};
+
+						asrc_out6_port:	port@c {
+							reg = <0xc>;
+
+							asrc_out6_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out6_ep>;
+							};
+						};
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						xbar_admaif0: endpoint {
+							remote-endpoint = <&admaif0>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						xbar_admaif1: endpoint {
+							remote-endpoint = <&admaif1>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						xbar_admaif2: endpoint {
+							remote-endpoint = <&admaif2>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						xbar_admaif3: endpoint {
+							remote-endpoint = <&admaif3>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						xbar_admaif4: endpoint {
+							remote-endpoint = <&admaif4>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						xbar_admaif5: endpoint {
+							remote-endpoint = <&admaif5>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						xbar_admaif6: endpoint {
+							remote-endpoint = <&admaif6>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						xbar_admaif7: endpoint {
+							remote-endpoint = <&admaif7>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						xbar_admaif8: endpoint {
+							remote-endpoint = <&admaif8>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						xbar_admaif9: endpoint {
+							remote-endpoint = <&admaif9>;
+						};
+					};
+
+					port@a {
+						reg = <0xa>;
+
+						xbar_admaif10: endpoint {
+							remote-endpoint = <&admaif10>;
+						};
+					};
+
+					port@b {
+						reg = <0xb>;
+
+						xbar_admaif11: endpoint {
+							remote-endpoint = <&admaif11>;
+						};
+					};
+
+					port@c {
+						reg = <0xc>;
+
+						xbar_admaif12: endpoint {
+							remote-endpoint = <&admaif12>;
+						};
+					};
+
+					port@d {
+						reg = <0xd>;
+
+						xbar_admaif13: endpoint {
+							remote-endpoint = <&admaif13>;
+						};
+					};
+
+					port@e {
+						reg = <0xe>;
+
+						xbar_admaif14: endpoint {
+							remote-endpoint = <&admaif14>;
+						};
+					};
+
+					port@f {
+						reg = <0xf>;
+
+						xbar_admaif15: endpoint {
+							remote-endpoint = <&admaif15>;
+						};
+					};
+
+					port@10 {
+						reg = <0x10>;
+
+						xbar_admaif16: endpoint {
+							remote-endpoint = <&admaif16>;
+						};
+					};
+
+					port@11 {
+						reg = <0x11>;
+
+						xbar_admaif17: endpoint {
+							remote-endpoint = <&admaif17>;
+						};
+					};
+
+					port@12 {
+						reg = <0x12>;
+
+						xbar_admaif18: endpoint {
+							remote-endpoint = <&admaif18>;
+						};
+					};
+
+					port@13 {
+						reg = <0x13>;
+
+						xbar_admaif19: endpoint {
+							remote-endpoint = <&admaif19>;
+						};
+					};
+
+					xbar_i2s1_port: port@14 {
+						reg = <0x14>;
+
+						xbar_i2s1: endpoint {
+							remote-endpoint = <&i2s1_cif>;
+						};
+					};
+
+					xbar_i2s2_port: port@15 {
+						reg = <0x15>;
+
+						xbar_i2s2: endpoint {
+							remote-endpoint = <&i2s2_cif>;
+						};
+					};
+
+					xbar_i2s3_port: port@16 {
+						reg = <0x16>;
+
+						xbar_i2s3: endpoint {
+							remote-endpoint = <&i2s3_cif>;
+						};
+					};
+
+					xbar_i2s4_port: port@17 {
+						reg = <0x17>;
+
+						xbar_i2s4: endpoint {
+							remote-endpoint = <&i2s4_cif>;
+						};
+					};
+
+					xbar_i2s5_port: port@18 {
+						reg = <0x18>;
+
+						xbar_i2s5: endpoint {
+							remote-endpoint = <&i2s5_cif>;
+						};
+					};
+
+					xbar_i2s6_port: port@19 {
+						reg = <0x19>;
+
+						xbar_i2s6: endpoint {
+							remote-endpoint = <&i2s6_cif>;
+						};
+					};
+
+					xbar_dmic1_port: port@1a {
+						reg = <0x1a>;
+
+						xbar_dmic1: endpoint {
+							remote-endpoint = <&dmic1_cif>;
+						};
+					};
+
+					xbar_dmic2_port: port@1b {
+						reg = <0x1b>;
+
+						xbar_dmic2: endpoint {
+							remote-endpoint = <&dmic2_cif>;
+						};
+					};
+
+					xbar_dmic3_port: port@1c {
+						reg = <0x1c>;
+
+						xbar_dmic3: endpoint {
+							remote-endpoint = <&dmic3_cif>;
+						};
+					};
+
+					xbar_dmic4_port: port@1d {
+						reg = <0x1d>;
+
+						xbar_dmic4: endpoint {
+							remote-endpoint = <&dmic4_cif>;
+						};
+					};
+
+					xbar_dspk1_port: port@1e {
+						reg = <0x1e>;
+
+						xbar_dspk1: endpoint {
+							remote-endpoint = <&dspk1_cif>;
+						};
+					};
+
+					xbar_dspk2_port: port@1f {
+						reg = <0x1f>;
+
+						xbar_dspk2: endpoint {
+							remote-endpoint = <&dspk2_cif>;
+						};
+					};
+
+					xbar_sfc1_in_port: port@20 {
+						reg = <0x20>;
+
+						xbar_sfc1_in: endpoint {
+							remote-endpoint = <&sfc1_cif_in>;
+						};
+					};
+
+					port@21 {
+						reg = <0x21>;
+
+						xbar_sfc1_out: endpoint {
+							remote-endpoint = <&sfc1_cif_out>;
+						};
+					};
+
+					xbar_sfc2_in_port: port@22 {
+						reg = <0x22>;
+
+						xbar_sfc2_in: endpoint {
+							remote-endpoint = <&sfc2_cif_in>;
+						};
+					};
+
+					port@23 {
+						reg = <0x23>;
+
+						xbar_sfc2_out: endpoint {
+							remote-endpoint = <&sfc2_cif_out>;
+						};
+					};
+
+					xbar_sfc3_in_port: port@24 {
+						reg = <0x24>;
+
+						xbar_sfc3_in: endpoint {
+							remote-endpoint = <&sfc3_cif_in>;
+						};
+					};
+
+					port@25 {
+						reg = <0x25>;
+
+						xbar_sfc3_out: endpoint {
+							remote-endpoint = <&sfc3_cif_out>;
+						};
+					};
+
+					xbar_sfc4_in_port: port@26 {
+						reg = <0x26>;
+
+						xbar_sfc4_in: endpoint {
+							remote-endpoint = <&sfc4_cif_in>;
+						};
+					};
+
+					port@27 {
+						reg = <0x27>;
+
+						xbar_sfc4_out: endpoint {
+							remote-endpoint = <&sfc4_cif_out>;
+						};
+					};
+
+					xbar_mvc1_in_port: port@28 {
+						reg = <0x28>;
+
+						xbar_mvc1_in: endpoint {
+							remote-endpoint = <&mvc1_cif_in>;
+						};
+					};
+
+					port@29 {
+						reg = <0x29>;
+
+						xbar_mvc1_out: endpoint {
+							remote-endpoint = <&mvc1_cif_out>;
+						};
+					};
+
+					xbar_mvc2_in_port: port@2a {
+						reg = <0x2a>;
+
+						xbar_mvc2_in: endpoint {
+							remote-endpoint = <&mvc2_cif_in>;
+						};
+					};
+
+					port@2b {
+						reg = <0x2b>;
+
+						xbar_mvc2_out: endpoint {
+							remote-endpoint = <&mvc2_cif_out>;
+						};
+					};
+
+					xbar_amx1_in1_port: port@2c {
+						reg = <0x2c>;
+
+						xbar_amx1_in1: endpoint {
+							remote-endpoint = <&amx1_in1>;
+						};
+					};
+
+					xbar_amx1_in2_port: port@2d {
+						reg = <0x2d>;
+
+						xbar_amx1_in2: endpoint {
+							remote-endpoint = <&amx1_in2>;
+						};
+					};
+
+					xbar_amx1_in3_port: port@2e {
+						reg = <0x2e>;
+
+						xbar_amx1_in3: endpoint {
+							remote-endpoint = <&amx1_in3>;
+						};
+					};
+
+					xbar_amx1_in4_port: port@2f {
+						reg = <0x2f>;
+
+						xbar_amx1_in4: endpoint {
+							remote-endpoint = <&amx1_in4>;
+						};
+					};
+
+					port@30 {
+						reg = <0x30>;
+
+						xbar_amx1_out: endpoint {
+							remote-endpoint = <&amx1_out>;
+						};
+					};
+
+					xbar_amx2_in1_port: port@31 {
+						reg = <0x31>;
+
+						xbar_amx2_in1: endpoint {
+							remote-endpoint = <&amx2_in1>;
+						};
+					};
+
+					xbar_amx2_in2_port: port@32 {
+						reg = <0x32>;
+
+						xbar_amx2_in2: endpoint {
+							remote-endpoint = <&amx2_in2>;
+						};
+					};
+
+					xbar_amx2_in3_port: port@33 {
+						reg = <0x33>;
+
+						xbar_amx2_in3: endpoint {
+							remote-endpoint = <&amx2_in3>;
+						};
+					};
+
+					xbar_amx2_in4_port: port@34 {
+						reg = <0x34>;
+
+						xbar_amx2_in4: endpoint {
+							remote-endpoint = <&amx2_in4>;
+						};
+					};
+
+					port@35 {
+						reg = <0x35>;
+
+						xbar_amx2_out: endpoint {
+							remote-endpoint = <&amx2_out>;
+						};
+					};
+
+					xbar_amx3_in1_port: port@36 {
+						reg = <0x36>;
+
+						xbar_amx3_in1: endpoint {
+							remote-endpoint = <&amx3_in1>;
+						};
+					};
+
+					xbar_amx3_in2_port: port@37 {
+						reg = <0x37>;
+
+						xbar_amx3_in2: endpoint {
+							remote-endpoint = <&amx3_in2>;
+						};
+					};
+
+					xbar_amx3_in3_port: port@38 {
+						reg = <0x38>;
+
+						xbar_amx3_in3: endpoint {
+							remote-endpoint = <&amx3_in3>;
+						};
+					};
+
+					xbar_amx3_in4_port: port@39 {
+						reg = <0x39>;
+
+						xbar_amx3_in4: endpoint {
+							remote-endpoint = <&amx3_in4>;
+						};
+					};
+
+					port@3a {
+						reg = <0x3a>;
+
+						xbar_amx3_out: endpoint {
+							remote-endpoint = <&amx3_out>;
+						};
+					};
+
+					xbar_amx4_in1_port: port@3b {
+						reg = <0x3b>;
+
+						xbar_amx4_in1: endpoint {
+							remote-endpoint = <&amx4_in1>;
+						};
+					};
+
+					xbar_amx4_in2_port: port@3c {
+						reg = <0x3c>;
+
+						xbar_amx4_in2: endpoint {
+							remote-endpoint = <&amx4_in2>;
+						};
+					};
+
+					xbar_amx4_in3_port: port@3d {
+						reg = <0x3d>;
+
+						xbar_amx4_in3: endpoint {
+							remote-endpoint = <&amx4_in3>;
+						};
+					};
+
+					xbar_amx4_in4_port: port@3e {
+						reg = <0x3e>;
+
+						xbar_amx4_in4: endpoint {
+							remote-endpoint = <&amx4_in4>;
+						};
+					};
+
+					port@3f {
+						reg = <0x3f>;
+
+						xbar_amx4_out: endpoint {
+							remote-endpoint = <&amx4_out>;
+						};
+					};
+
+					xbar_adx1_in_port: port@40 {
+						reg = <0x40>;
+
+						xbar_adx1_in: endpoint {
+							remote-endpoint = <&adx1_in>;
+						};
+					};
+
+					port@41 {
+						reg = <0x41>;
+
+						xbar_adx1_out1: endpoint {
+							remote-endpoint = <&adx1_out1>;
+						};
+					};
+
+					port@42 {
+						reg = <0x42>;
+
+						xbar_adx1_out2: endpoint {
+							remote-endpoint = <&adx1_out2>;
+						};
+					};
+
+					port@43 {
+						reg = <0x43>;
+
+						xbar_adx1_out3: endpoint {
+							remote-endpoint = <&adx1_out3>;
+						};
+					};
+
+					port@44 {
+						reg = <0x44>;
+
+						xbar_adx1_out4: endpoint {
+							remote-endpoint = <&adx1_out4>;
+						};
+					};
+
+					xbar_adx2_in_port: port@45 {
+						reg = <0x45>;
+
+						xbar_adx2_in: endpoint {
+							remote-endpoint = <&adx2_in>;
+						};
+					};
+
+					port@46 {
+						reg = <0x46>;
+
+						xbar_adx2_out1: endpoint {
+							remote-endpoint = <&adx2_out1>;
+						};
+					};
+
+					port@47 {
+						reg = <0x47>;
+
+						xbar_adx2_out2: endpoint {
+							remote-endpoint = <&adx2_out2>;
+						};
+					};
+
+					port@48 {
+						reg = <0x48>;
+
+						xbar_adx2_out3: endpoint {
+							remote-endpoint = <&adx2_out3>;
+						};
+					};
+
+					port@49 {
+						reg = <0x49>;
+
+						xbar_adx2_out4: endpoint {
+							remote-endpoint = <&adx2_out4>;
+						};
+					};
+
+					xbar_adx3_in_port: port@4a {
+						reg = <0x4a>;
+
+						xbar_adx3_in: endpoint {
+							remote-endpoint = <&adx3_in>;
+						};
+					};
+
+					port@4b {
+						reg = <0x4b>;
+
+						xbar_adx3_out1: endpoint {
+							remote-endpoint = <&adx3_out1>;
+						};
+					};
+
+					port@4c {
+						reg = <0x4c>;
+
+						xbar_adx3_out2: endpoint {
+							remote-endpoint = <&adx3_out2>;
+						};
+					};
+
+					port@4d {
+						reg = <0x4d>;
+
+						xbar_adx3_out3: endpoint {
+							remote-endpoint = <&adx3_out3>;
+						};
+					};
+
+					port@4e {
+						reg = <0x4e>;
+
+						xbar_adx3_out4: endpoint {
+							remote-endpoint = <&adx3_out4>;
+						};
+					};
+
+					xbar_adx4_in_port: port@4f {
+						reg = <0x4f>;
+
+						xbar_adx4_in: endpoint {
+							remote-endpoint = <&adx4_in>;
+						};
+					};
+
+					port@50 {
+						reg = <0x50>;
+
+						xbar_adx4_out1: endpoint {
+							remote-endpoint = <&adx4_out1>;
+						};
+					};
+
+					port@51 {
+						reg = <0x51>;
+
+						xbar_adx4_out2: endpoint {
+							remote-endpoint = <&adx4_out2>;
+						};
+					};
+
+					port@52 {
+						reg = <0x52>;
+
+						xbar_adx4_out3: endpoint {
+							remote-endpoint = <&adx4_out3>;
+						};
+					};
+
+					port@53 {
+						reg = <0x53>;
+
+						xbar_adx4_out4: endpoint {
+							remote-endpoint = <&adx4_out4>;
+						};
+					};
+
+					xbar_mix_in1_port: port@54 {
+						reg = <0x54>;
+
+						xbar_mix_in1: endpoint {
+							remote-endpoint = <&mix_in1>;
+						};
+					};
+
+					xbar_mix_in2_port: port@55 {
+						reg = <0x55>;
+
+						xbar_mix_in2: endpoint {
+							remote-endpoint = <&mix_in2>;
+						};
+					};
+
+					xbar_mix_in3_port: port@56 {
+						reg = <0x56>;
+
+						xbar_mix_in3: endpoint {
+							remote-endpoint = <&mix_in3>;
+						};
+					};
+
+					xbar_mix_in4_port: port@57 {
+						reg = <0x57>;
+
+						xbar_mix_in4: endpoint {
+							remote-endpoint = <&mix_in4>;
+						};
+					};
+
+					xbar_mix_in5_port: port@58 {
+						reg = <0x58>;
+
+						xbar_mix_in5: endpoint {
+							remote-endpoint = <&mix_in5>;
+						};
+					};
+
+					xbar_mix_in6_port: port@59 {
+						reg = <0x59>;
+
+						xbar_mix_in6: endpoint {
+							remote-endpoint = <&mix_in6>;
+						};
+					};
+
+					xbar_mix_in7_port: port@5a {
+						reg = <0x5a>;
+
+						xbar_mix_in7: endpoint {
+							remote-endpoint = <&mix_in7>;
+						};
+					};
+
+					xbar_mix_in8_port: port@5b {
+						reg = <0x5b>;
+
+						xbar_mix_in8: endpoint {
+							remote-endpoint = <&mix_in8>;
+						};
+					};
+
+					xbar_mix_in9_port: port@5c {
+						reg = <0x5c>;
+
+						xbar_mix_in9: endpoint {
+							remote-endpoint = <&mix_in9>;
+						};
+					};
+
+					xbar_mix_in10_port: port@5d {
+						reg = <0x5d>;
+
+						xbar_mix_in10: endpoint {
+							remote-endpoint = <&mix_in10>;
+						};
+					};
+
+					port@5e {
+						reg = <0x5e>;
+
+						xbar_mix_out1: endpoint {
+							remote-endpoint = <&mix_out1>;
+						};
+					};
+
+					port@5f {
+						reg = <0x5f>;
+
+						xbar_mix_out2: endpoint {
+							remote-endpoint = <&mix_out2>;
+						};
+					};
+
+					port@60 {
+						reg = <0x60>;
+
+						xbar_mix_out3: endpoint {
+							remote-endpoint = <&mix_out3>;
+						};
+					};
+
+					port@61 {
+						reg = <0x61>;
+
+						xbar_mix_out4: endpoint {
+							remote-endpoint = <&mix_out4>;
+						};
+					};
+
+					port@62 {
+						reg = <0x62>;
+
+						xbar_mix_out5: endpoint {
+							remote-endpoint = <&mix_out5>;
+						};
+					};
+
+					xbar_asrc_in1_port: port@63 {
+						reg = <0x63>;
+
+						xbar_asrc_in1_ep: endpoint {
+							remote-endpoint = <&asrc_in1_ep>;
+						};
+					};
+
+					port@64 {
+						reg = <0x64>;
+
+						xbar_asrc_out1_ep: endpoint {
+							remote-endpoint = <&asrc_out1_ep>;
+						};
+					};
+
+					xbar_asrc_in2_port: port@65 {
+						reg = <0x65>;
+
+						xbar_asrc_in2_ep: endpoint {
+							remote-endpoint = <&asrc_in2_ep>;
+						};
+					};
+
+					port@66 {
+						reg = <0x66>;
+
+						xbar_asrc_out2_ep: endpoint {
+							remote-endpoint = <&asrc_out2_ep>;
+						};
+					};
+
+					xbar_asrc_in3_port: port@67 {
+						reg = <0x67>;
+
+						xbar_asrc_in3_ep: endpoint {
+							remote-endpoint = <&asrc_in3_ep>;
+						};
+					};
+
+					port@68 {
+						reg = <0x68>;
+
+						xbar_asrc_out3_ep: endpoint {
+							remote-endpoint = <&asrc_out3_ep>;
+						};
+					};
+
+					xbar_asrc_in4_port: port@69 {
+						reg = <0x69>;
+
+						xbar_asrc_in4_ep: endpoint {
+							remote-endpoint = <&asrc_in4_ep>;
+						};
+					};
+
+					port@6a {
+						reg = <0x6a>;
+
+						xbar_asrc_out4_ep: endpoint {
+							remote-endpoint = <&asrc_out4_ep>;
+						};
+					};
+
+					xbar_asrc_in5_port: port@6b {
+						reg = <0x6b>;
+
+						xbar_asrc_in5_ep: endpoint {
+							remote-endpoint = <&asrc_in5_ep>;
+						};
+					};
+
+					port@6c {
+						reg = <0x6c>;
+
+						xbar_asrc_out5_ep: endpoint {
+							remote-endpoint = <&asrc_out5_ep>;
+						};
+					};
+
+					xbar_asrc_in6_port: port@6d {
+						reg = <0x6d>;
+
+						xbar_asrc_in6_ep: endpoint {
+							remote-endpoint = <&asrc_in6_ep>;
+						};
+					};
+
+					port@6e {
+						reg = <0x6e>;
+
+						xbar_asrc_out6_ep: endpoint {
+							remote-endpoint = <&asrc_out6_ep>;
+						};
+					};
+
+					xbar_asrc_in7_port: port@6f {
+						reg = <0x6f>;
+
+						xbar_asrc_in7_ep: endpoint {
+							remote-endpoint = <&asrc_in7_ep>;
+						};
+					};
+
+					xbar_ope1_in_port: port@70 {
+						reg = <0x70>;
+
+						xbar_ope1_in_ep: endpoint {
+							remote-endpoint = <&ope1_cif_in_ep>;
+						};
+					};
+
+					port@71 {
+						reg = <0x71>;
+
+						xbar_ope1_out_ep: endpoint {
+							remote-endpoint = <&ope1_cif_out_ep>;
+						};
+					};
 				};
 			};
 
@@ -685,6 +2775,8 @@
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA234_CLK_UARTA>;
 			resets = <&bpmp TEGRA234_RESET_UARTA>;
+			dmas = <&gpcdma 8>, <&gpcdma 8>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -868,6 +2960,11 @@
 				 <&bpmp TEGRA234_CLK_QSPI0_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA234_RESET_QSPI0>;
+			iommus = <&smmu_niso1 TEGRA234_SID_QSPI0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_QSPI0_2X_PM>,
+					  <&bpmp TEGRA234_CLK_QSPI0_PM>;
+			assigned-clock-rates = <199999999 99999999>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC>;
 			status = "disabled";
 		};
 
@@ -951,6 +3048,11 @@
 				 <&bpmp TEGRA234_CLK_QSPI1_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA234_RESET_QSPI1>;
+			iommus = <&smmu_niso1 TEGRA234_SID_QSPI1>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_QSPI1_2X_PM>,
+					  <&bpmp TEGRA234_CLK_QSPI1_PM>;
+			assigned-clock-rates = <199999999 99999999>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC>;
 			status = "disabled";
 		};
 
@@ -1459,8 +3561,16 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
 			status = "disabled";
+
+			snps,axi-config = <&mgbe0_axi_setup>;
+
+			mgbe0_axi_setup: stmmac-axi-config {
+				snps,blen = <256 128 64 32>;
+				snps,rd_osr_lmt = <63>;
+				snps,wr_osr_lmt = <63>;
+			};
 		};
 
 		ethernet@6900000 {
@@ -1493,8 +3603,16 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBEBWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
 			status = "disabled";
+
+			snps,axi-config = <&mgbe1_axi_setup>;
+
+			mgbe1_axi_setup: stmmac-axi-config {
+				snps,blen = <256 128 64 32>;
+				snps,rd_osr_lmt = <63>;
+				snps,wr_osr_lmt = <63>;
+			};
 		};
 
 		ethernet@6a00000 {
@@ -1527,8 +3645,16 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBECWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF2>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBED>;
 			status = "disabled";
+
+			snps,axi-config = <&mgbe2_axi_setup>;
+
+			mgbe2_axi_setup: stmmac-axi-config {
+				snps,blen = <256 128 64 32>;
+				snps,rd_osr_lmt = <63>;
+				snps,wr_osr_lmt = <63>;
+			};
 		};
 
 		ethernet@6b00000 {
@@ -1711,7 +3837,7 @@
 			compatible = "nvidia,tegra234-sce-fabric";
 			reg = <0x0 0xb600000 0x0 0x40000>;
 			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			status = "okay";
+			status = "disabled";
 		};
 
 		rce-fabric@be00000 {
@@ -1796,7 +3922,7 @@
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			resets = <&bpmp TEGRA234_RESET_SPI2>;
 			reset-names = "spi";
-			dmas = <&gpcdma 19>, <&gpcdma 19>;
+			dmas = <&gpcdma 16>, <&gpcdma 16>;
 			dma-names = "rx", "tx";
 			dma-coherent;
 			status = "disabled";
@@ -1891,7 +4017,7 @@
 		};
 
 		dce-fabric@de00000 {
-			compatible = "nvidia,tegra234-sce-fabric";
+			compatible = "nvidia,tegra234-dce-fabric";
 			reg = <0x0 0xde00000 0x0 0x40000>;
 			interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
 			status = "okay";
@@ -1914,6 +4040,8 @@
 			#redistributor-regions = <1>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+
+			#address-cells = <0>;
 		};
 
 		smmu_iso: iommu@10000000 {
@@ -2304,6 +4432,22 @@
 				 */
 				status = "disabled";
 			};
+
+			crypto@15820000 {
+				compatible = "nvidia,tegra234-se-aes";
+				reg = <0x00 0x15820000 0x00 0x10000>;
+				clocks = <&bpmp TEGRA234_CLK_SE>;
+				iommus = <&smmu_niso1 TEGRA234_SID_SES_SE1>;
+				dma-coherent;
+			};
+
+			crypto@15840000 {
+				compatible = "nvidia,tegra234-se-hash";
+				reg = <0x00 0x15840000 0x00 0x10000>;
+				clocks = <&bpmp TEGRA234_CLK_SE>;
+				iommus = <&smmu_niso1 TEGRA234_SID_SES_SE2>;
+				dma-coherent;
+			};
 		};
 
 		pcie@140a0000 {
@@ -2722,6 +4866,37 @@
 			status = "disabled";
 		};
 
+		pcie-ep@14160000 {
+			compatible = "nvidia,tegra234-pcie-ep";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>;
+			reg = <0x00 0x14160000 0x0 0x00020000     /* appl registers (128K)      */
+				0x00 0x36040000 0x0 0x00040000    /* iATU_DMA reg space (256K)  */
+				0x00 0x36080000 0x0 0x00040000    /* DBI space (256K)           */
+				0x21 0x40000000 0x3 0x00000000>;  /* Address Space (12G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+			num-lanes = <4>;
+			clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>;
+			clock-names = "core";
+			resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>,
+			       <&bpmp TEGRA234_RESET_PEX0_CORE_4>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;  /* controller interrupt */
+			interrupt-names = "intr";
+			nvidia,bpmp = <&bpmp 4>;
+			nvidia,enable-ext-refclk;
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE4R &emc>,
+				      <&mc TEGRA234_MEMORY_CLIENT_PCIE4W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso0 TEGRA234_SID_PCIE4>;
+			dma-coherent;
+			status = "disabled";
+		};
+
 		pcie@14180000 {
 			compatible = "nvidia,tegra234-pcie";
 			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BA>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3834-0008.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3834-0008.dtsi
new file mode 100644
index 000000000000..94ace6784749
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3834-0008.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include "tegra264-p3834.dtsi"
+
+/ {
+	compatible = "nvidia,p3834-0008", "nvidia,tegra264";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi
new file mode 100644
index 000000000000..06795c82427a
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include "tegra264.dtsi"
+
+/ {
+	compatible = "nvidia,p3834", "nvidia,tegra264";
+
+	aliases {
+	};
+
+	bus@0 {
+		serial@c4e0000 {
+			status = "okay";
+		};
+
+		serial@c5a0000 {
+			status = "okay";
+		};
+	};
+
+	bus@8100000000 {
+		iommu@5000000 {
+			status = "okay";
+		};
+
+		iommu@6000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834-0008.dts b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834-0008.dts
new file mode 100644
index 000000000000..3a6f4b7e6b75
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834-0008.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/dts-v1/;
+
+// module files must be included first
+#include "tegra264-p3834-0008.dtsi"
+#include "tegra264-p3971-0089+p3834.dtsi"
+
+/ {
+	model = "NVIDIA P3971-0089+P3834-0008 Engineering Reference Platform";
+	compatible = "nvidia,p3971-0089+p3834-0008", "nvidia,p3834-0008", "nvidia,tegra264";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834.dtsi
new file mode 100644
index 000000000000..46cfa8f1da1c
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include "tegra264-p3971-0089.dtsi"
+
+/ {
+	aliases {
+		serial0 = &{/bus@0/serial@c4e0000};
+		serial1 = &{/bus@0/serial@c5a0000};
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089.dtsi
new file mode 100644
index 000000000000..e8576cf2a0b6
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089.dtsi
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include "tegra264-p3971.dtsi"
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi
new file mode 100644
index 000000000000..6b6259b7310f
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
new file mode 100644
index 000000000000..872a69553e3c
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include <dt-bindings/clock/nvidia,tegra264.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/memory/nvidia,tegra264.h>
+#include <dt-bindings/reset/nvidia,tegra264.h>
+
+/ {
+	compatible = "nvidia,tegra264";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		shmem_bpmp: shmem@86070000 {
+			compatible = "nvidia,tegra264-bpmp-shmem";
+			reg = <0x0 0x86070000 0x0 0x2000>;
+			no-map;
+		};
+	};
+
+	/* SYSTEM MMIO */
+	bus@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x00000000 0x00 0x00000000 0x01 0x00000000>;
+
+		misc@100000 {
+			compatible = "nvidia,tegra234-misc";
+			reg = <0x0 0x00100000 0x0 0x0f000>,
+			      <0x0 0x0c140000 0x0 0x10000>;
+		};
+
+		timer@8000000 {
+			compatible = "nvidia,tegra234-timer";
+			reg = <0x0 0x08000000 0x0 0x140000>;
+			interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gpcdma: dma-controller@8400000 {
+			compatible = "nvidia,tegra264-gpcdma", "nvidia,tegra186-gpcdma";
+			reg = <0x0 0x08400000 0x0 0x210000>;
+			interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 611 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 612 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 615 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			iommus = <&smmu1 0x00000800>;
+			dma-coherent;
+			dma-channel-mask = <0xfffffffe>;
+			status = "disabled";
+		};
+
+		hsp_top: hsp@8800000 {
+			compatible = "nvidia,tegra264-hsp";
+			reg = <0x0 0x08800000 0x0 0xd0000>;
+			interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 622 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 623 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 624 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 626 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "doorbell", "shared0", "shared1", "shared2",
+					  "shared3", "shared4", "shared5", "shared6",
+					  "shared7";
+			#mbox-cells = <2>;
+		};
+
+		rtc: rtc@c2c0000 {
+			compatible = "nvidia,tegra264-rtc", "nvidia,tegra20-rtc";
+			reg = <0x0 0x0c2c0000 0x0 0x10000>;
+			interrupt-parent = <&pmc>;
+			interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA264_CLK_CLK_S>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		serial@c4e0000 {
+			compatible = "nvidia,tegra264-utc";
+			reg = <0x0 0x0c4e0000 0x0 0x8000>,
+			      <0x0 0x0c4e8000 0x0 0x8000>;
+			reg-names = "tx", "rx";
+			interrupts = <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>;
+			rx-threshold = <4>;
+			tx-threshold = <4>;
+			status = "disabled";
+		};
+
+		serial@c5a0000 {
+			compatible = "nvidia,tegra264-utc";
+			reg = <0x0 0x0c5a0000 0x0 0x8000>,
+			      <0x0 0x0c5a8000 0x0 0x8000>;
+			reg-names = "tx", "rx";
+			interrupts = <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>;
+			rx-threshold = <4>;
+			tx-threshold = <4>;
+			status = "disabled";
+		};
+
+		uart0: serial@c5f0000 {
+			compatible = "arm,sbsa-uart";
+			reg = <0x0 0x0c5f0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@c600000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x0 0x0c600000 0x0 0x10000>;
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_AON_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLAON>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_AON_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLAON>;
+			resets = <&bpmp TEGRA264_RESET_I2C2>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c3: i2c@c610000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x0 0x0c610000 0x0 0x10000>;
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_AON_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLAON>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_AON_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLAON>;
+			resets = <&bpmp TEGRA264_RESET_I2C3>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		pmc: pmc@c800000 {
+			compatible = "nvidia,tegra264-pmc";
+			reg = <0x0 0x0c800000 0x0 0x100000>,
+			      <0x0 0x0c990000 0x0 0x10000>,
+			      <0x0 0x0ca00000 0x0 0x10000>,
+			      <0x0 0x0c980000 0x0 0x10000>,
+			      <0x0 0x0c9c0000 0x0 0x40000>;
+			reg-names = "pmc", "wake", "aotag", "scratch", "misc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+	};
+
+	/* TOP_MMIO */
+	bus@8100000000 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x00000000 0x81 0x00000000 0x01 0x00000000>, /* MMIO */
+			 <0x01 0x00000000 0x00 0x20000000 0x00 0x40000000>, /* non-prefetchable memory (32-bit) */
+			 <0x02 0x00000000 0xd0 0x00000000 0x08 0x80000000>; /* ECAM, prefetchable memory, I/O */
+
+		smmu1: iommu@5000000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x00 0x5000000 0x0 0x200000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 13 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			status = "disabled";
+
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+
+		smmu2: iommu@6000000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x00 0x6000000 0x0 0x200000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			status = "disabled";
+
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+
+		mc: memory-controller@8020000 {
+			compatible = "nvidia,tegra264-mc";
+			reg = <0x00 0x8020000 0x0 0x20000>, /* MC broadcast */
+			      <0x00 0x8040000 0x0 0x20000>, /* MC  0 */
+			      <0x00 0x8060000 0x0 0x20000>, /* MC  1 */
+			      <0x00 0x8080000 0x0 0x20000>, /* MC  2 */
+			      <0x00 0x80a0000 0x0 0x20000>, /* MC  3 */
+			      <0x00 0x80c0000 0x0 0x20000>, /* MC  4 */
+			      <0x00 0x80e0000 0x0 0x20000>, /* MC  5 */
+			      <0x00 0x8100000 0x0 0x20000>, /* MC  6 */
+			      <0x00 0x8120000 0x0 0x20000>, /* MC  7 */
+			      <0x00 0x8140000 0x0 0x20000>, /* MC  8 */
+			      <0x00 0x8160000 0x0 0x20000>, /* MC  9 */
+			      <0x00 0x8180000 0x0 0x20000>, /* MC 10 */
+			      <0x00 0x81a0000 0x0 0x20000>, /* MC 11 */
+			      <0x00 0x81c0000 0x0 0x20000>, /* MC 12 */
+			      <0x00 0x81e0000 0x0 0x20000>, /* MC 13 */
+			      <0x00 0x8200000 0x0 0x20000>, /* MC 14 */
+			      <0x00 0x8220000 0x0 0x20000>; /* MC 15 */
+			reg-names = "broadcast", "ch0", "ch1", "ch2", "ch3",
+				    "ch4", "ch5", "ch6", "ch7", "ch8", "ch9",
+				    "ch10", "ch11", "ch12", "ch13", "ch14",
+				    "ch15";
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			#interconnect-cells = <1>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			/* limit the DMA range for memory clients to [39:0] */
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+			emc: external-memory-controller@8800000 {
+				compatible = "nvidia,tegra264-emc";
+				reg = <0x00 0x8800000 0x0 0x20000>,
+				      <0x00 0x8890000 0x0 0x20000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA264_CLK_EMC>;
+				clock-names = "emc";
+
+				#interconnect-cells = <0>;
+				nvidia,bpmp = <&bpmp>;
+			};
+		};
+
+		smmu0: iommu@a000000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x00 0xa000000 0x0 0x200000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			status = "disabled";
+
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+
+		smmu4: iommu@b000000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x00 0xb000000 0x0 0x200000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			status = "disabled";
+
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+
+		i2c14: i2c@c410000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c410000 0x0 0x10000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C14>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c15: i2c@c420000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c420000 0x0 0x10000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C15>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c16: i2c@c430000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c430000 0x0 0x10000>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C16>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c0: i2c@c630000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c630000 0x0 0x10000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C0>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c1: i2c@c640000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c640000 0x0 0x10000>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C1>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c4: i2c@c650000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c650000 0x0 0x10000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C4>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c6: i2c@c670000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c670000 0x0 0x10000>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C6>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c7: i2c@c680000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c680000 0x0 0x10000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C7>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c8: i2c@c690000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c690000 0x0 0x10000>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C8>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c9: i2c@c6a0000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c6a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C9>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c10: i2c@c6b0000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c6b0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C10>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c11: i2c@c6c0000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c6c0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C11>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c12: i2c@c6d0000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c6d0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C12>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@46000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x00 0x46000000 0x0 0x010000>, /* GICD */
+			      <0x00 0x46080000 0x0 0x400000>; /* GICR */
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+
+			redistributor-stride = <0x0 0x40000>;
+			#redistributor-regions = <1>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			ranges = <0x0 0x0 0x00 0x46000000 0x0 0x1000000>;
+
+			its: msi-controller@40000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x40000 0x0 0x40000>;
+				#msi-cells = <1>;
+				msi-controller;
+			};
+		};
+	};
+
+	/* DISP_USB MMIO */
+	bus@8800000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x00000000 0x88 0x00000000 0x01 0x00000000>;
+
+		smmu3: iommu@6000000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x00 0x6000000 0x0 0x200000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 226 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			status = "disabled";
+
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+	};
+
+	/* UPHY MMIO */
+	bus@a800000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x00000000 0xa8 0x00000000 0x40 0x00000000>, /* MMIO, ECAM, prefetchable memory, I/O */
+			 <0x80 0x00000000 0x00 0x20000000 0x00 0x40000000>; /* non-prefetchable memory (32-bit) */
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,armv8";
+			device_type = "cpu";
+			reg = <0x00000>;
+			status = "okay";
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,armv8";
+			device_type = "cpu";
+			reg = <0x10000>;
+			status = "okay";
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+		};
+	};
+
+	bpmp: bpmp {
+		compatible = "nvidia,tegra264-bpmp", "nvidia,tegra186-bpmp";
+		mboxes = <&hsp_top TEGRA_HSP_MBOX_TYPE_DB
+				   TEGRA_HSP_DB_MASTER_BPMP>;
+		memory-region = <&shmem_bpmp>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#power-domain-cells = <1>;
+
+		i2c {
+			compatible = "nvidia,tegra186-bpmp-i2c";
+			nvidia,bpmp-bus-id = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		thermal {
+			compatible = "nvidia,tegra186-bpmp-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		status = "okay";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d6cb840b7050..296688f7cb26 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,19 +1,26 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 
-apq8016-sbc-usb-host-dtbs	:= apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo
+apq8016-sbc-d3-camera-mezzanine-dtbs	:= apq8016-sbc.dtb apq8016-sbc-d3-camera-mezzanine.dtbo
+apq8016-sbc-usb-host-dtbs		:= apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM) += sar2130p-qar2130p.dtb
 
-dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-usb-host.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-d3-camera-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-usb-host.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-schneider-hmibsc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8039-t2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= hamoa-iot-evk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-rdp432-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-tplink-archer-ax55-v1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp441.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5424-rdp466.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
@@ -23,31 +30,55 @@ dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp433.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp449.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp453.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp454.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk.dtb
+
+lemans-evk-camera-csi1-imx577-dtbs	:= lemans-evk.dtb lemans-evk-camera-csi1-imx577.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk-camera-csi1-imx577.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= monaco-evk.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8216-samsung-fortuna3g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-asus-z00l.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-gplus-fl8005a.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-huawei-g7.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-lg-c50.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-lg-m216.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8150.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8910.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-motorola-harpia.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-motorola-osprey.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-motorola-surnia.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a3u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a5u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-e5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-e7.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gprimeltecan.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-grandmax.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-grandprimelte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gt510.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gt58.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j3ltetw.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5x.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-rossa.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-uf896.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-ufi001c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt86518.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt86528.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8917-xiaomi-riva.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8929-wingtech-wt82918hd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-wingtech-wt82918.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-wingtech-wt82918hd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-flipkart-rimob.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-mido.dtb
@@ -55,8 +86,10 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-tissot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-vince.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-kugo.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-suzu.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8976-longcheer-l9360.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-10.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-h815.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-msft-lumia-octagon-talkman.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-xiaomi-libra.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-huawei-angler-rev-101.dtb
@@ -87,19 +120,39 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-fairphone-fp5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-particle-tachyon.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-shift-otter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs615-ride.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
+
+qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo
+qcs6490-rb3gen2-industrial-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-industrial-mezzanine.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2-industrial-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2-vision-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs8300-ride.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
+
+qrb5165-rb5-vision-mezzanine-dtbs	:= qrb5165-rb5.dtb qrb5165-rb5-vision-mezzanine.dtbo
+
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5-vision-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride-r3.dtb
+sc7180-acer-aspire1-el2-dtbs	:= sc7180-acer-aspire1.dtb sc7180-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb sc7180-acer-aspire1-el2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb
@@ -165,9 +218,18 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-lenovo-flex-5g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-primus.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb
+sc8280xp-crd-el2-dtbs	:= sc8280xp-crd.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb sc8280xp-crd-el2.dtb
+sc8280xp-huawei-gaokun3-el2-dtbs	:= sc8280xp-huawei-gaokun3.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-huawei-gaokun3.dtb sc8280xp-huawei-gaokun3-el2.dtb
+sc8280xp-lenovo-thinkpad-x13s-el2-dtbs	:= sc8280xp-lenovo-thinkpad-x13s.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb sc8280xp-lenovo-thinkpad-x13s-el2.dtb
+sc8280xp-microsoft-arcata-el2-dtbs	:= sc8280xp-microsoft-arcata.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-arcata.dtb sc8280xp-microsoft-arcata-el2.dtb
+sc8280xp-microsoft-blackrock-el2-dtbs	:= sc8280xp-microsoft-blackrock.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-blackrock.dtb sc8280xp-microsoft-blackrock-el2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sda660-inforce-ifc6560.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-lenovo-tbx605f.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-motorola-ali.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-ganges-kirin.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
@@ -178,10 +240,10 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-motorola-ocean.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-sargo.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
+
+sdm845-db845c-navigation-mezzanine-dtbs	:= sdm845-db845c.dtb sdm845-db845c-navigation-mezzanine.dtbo
+
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c-navigation-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyln.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyp.dtb
@@ -204,11 +266,14 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm4450-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6115-fxtec-pro1x.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6115p-lenovo-j606f.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-ginkgo.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-laurel-sprout.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm7125-xiaomi-curtana.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7125-xiaomi-joyeuse.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm7325-nothing-spacewar.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-microsoft-surface-duo.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-mtp.dtb
@@ -216,10 +281,13 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-sony-xperia-kumano-bahamut.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-sony-xperia-kumano-griffin.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-samsung-r8q.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-samsung-x1q.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx203.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx206.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-boe.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-csot.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-pipa.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-microsoft-surface-duo2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-mtp.dtb
@@ -227,7 +295,58 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx214.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx215.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-samsung-r0q.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx223.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-samsung-q5q.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-sony-xperia-yodo-pdx234.dtb
+
+sm8650-hdk-display-card-dtbs	:= sm8650-hdk.dtb sm8650-hdk-display-card.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-hdk-display-card.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-hdk.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8750-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8750-qrd.dtb
+x1e001de-devkit-el2-dtbs	:= x1e001de-devkit.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e001de-devkit.dtb x1e001de-devkit-el2.dtb
+x1e78100-lenovo-thinkpad-t14s-el2-dtbs	:= x1e78100-lenovo-thinkpad-t14s.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e78100-lenovo-thinkpad-t14s.dtb x1e78100-lenovo-thinkpad-t14s-el2.dtb
+x1e78100-lenovo-thinkpad-t14s-oled-el2-dtbs	:= x1e78100-lenovo-thinkpad-t14s-oled.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e78100-lenovo-thinkpad-t14s-oled.dtb x1e78100-lenovo-thinkpad-t14s-oled-el2.dtb
+x1e80100-asus-vivobook-s15-el2-dtbs	:= x1e80100-asus-vivobook-s15.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-vivobook-s15.dtb x1e80100-asus-vivobook-s15-el2.dtb
+x1e80100-asus-zenbook-a14-el2-dtbs	:= x1e80100-asus-zenbook-a14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-zenbook-a14.dtb x1e80100-asus-zenbook-a14-el2.dtb
+x1e80100-crd-el2-dtbs	:= x1e80100-crd.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb x1e80100-crd-el2.dtb
+x1e80100-dell-inspiron-14-plus-7441-el2-dtbs	:= x1e80100-dell-inspiron-14-plus-7441.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-dell-inspiron-14-plus-7441.dtb x1e80100-dell-inspiron-14-plus-7441-el2.dtb
+x1e80100-dell-latitude-7455-el2-dtbs	:= x1e80100-dell-latitude-7455.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-dell-latitude-7455.dtb x1e80100-dell-latitude-7455-el2.dtb
+x1e80100-dell-xps13-9345-el2-dtbs	:= x1e80100-dell-xps13-9345.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-dell-xps13-9345.dtb x1e80100-dell-xps13-9345-el2.dtb
+x1e80100-hp-elitebook-ultra-g1q-el2-dtbs := x1e80100-hp-elitebook-ultra-g1q.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-hp-elitebook-ultra-g1q.dtb x1e80100-hp-elitebook-ultra-g1q-el2.dtb
+x1e80100-hp-omnibook-x14-el2-dtbs	:= x1e80100-hp-omnibook-x14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-hp-omnibook-x14.dtb x1e80100-hp-omnibook-x14-el2.dtb
+x1e80100-lenovo-yoga-slim7x-el2-dtbs	:= x1e80100-lenovo-yoga-slim7x.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-lenovo-yoga-slim7x.dtb x1e80100-lenovo-yoga-slim7x-el2.dtb
+x1e80100-microsoft-romulus13-el2-dtbs	:= x1e80100-microsoft-romulus13.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-microsoft-romulus13.dtb x1e80100-microsoft-romulus13-el2.dtb
+x1e80100-microsoft-romulus15-el2-dtbs	:= x1e80100-microsoft-romulus15.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-microsoft-romulus15.dtb x1e80100-microsoft-romulus15-el2.dtb
+x1e80100-qcp-el2-dtbs	:= x1e80100-qcp.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-qcp.dtb x1e80100-qcp-el2.dtb
+x1p42100-asus-zenbook-a14-el2-dtbs	:= x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb
+x1p42100-crd-el2-dtbs	:= x1p42100-crd.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-crd.dtb x1p42100-crd-el2.dtb
+x1p42100-hp-omnibook-x14-el2-dtbs := x1p42100-hp-omnibook-x14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-hp-omnibook-x14.dtb x1p42100-hp-omnibook-x14-el2.dtb
+x1p42100-lenovo-thinkbook-16-el2-dtbs	:= x1p42100-lenovo-thinkbook-16.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-lenovo-thinkbook-16.dtb x1p42100-lenovo-thinkbook-16-el2.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dtso
index c08b4be5cc7e..d739ece6b44f 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dtso
@@ -5,11 +5,13 @@
  */
 
 /dts-v1/;
+/plugin/;
 
-#include "apq8016-sbc.dts"
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/gpio/gpio.h>
 
-/ {
-	camera_vdddo_1v8: camera-vdddo-1v8 {
+&{/} {
+	camera_vdddo_1v8: regulator-camera-vdddo {
 		compatible = "regulator-fixed";
 		regulator-name = "camera_vdddo";
 		regulator-min-microvolt = <1800000>;
@@ -17,7 +19,7 @@
 		regulator-always-on;
 	};
 
-	camera_vdda_2v8: camera-vdda-2v8 {
+	camera_vdda_2v8: regulator-camera-vdda {
 		compatible = "regulator-fixed";
 		regulator-name = "camera_vdda";
 		regulator-min-microvolt = <2800000>;
@@ -25,7 +27,7 @@
 		regulator-always-on;
 	};
 
-	camera_vddd_1v5: camera-vddd-1v5 {
+	camera_vddd_1v5: regulator-camera-vddd {
 		compatible = "regulator-fixed";
 		regulator-name = "camera_vddd";
 		regulator-min-microvolt = <1500000>;
@@ -38,6 +40,9 @@
 	status = "okay";
 
 	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		port@0 {
 			reg = <0>;
 			csiphy0_ep: endpoint {
@@ -53,7 +58,10 @@
 };
 
 &cci_i2c0 {
-	camera_rear@3b {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@3b {
 		compatible = "ovti,ov5640";
 		reg = <0x3b>;
 
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 9ffad7d1f2b6..ba6ccf0db16a 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -91,7 +91,7 @@
 
 		compatible = "gpio-leds";
 
-		led@1 {
+		led-1 {
 			label = "apq8016-sbc:green:user1";
 			function = LED_FUNCTION_HEARTBEAT;
 			color = <LED_COLOR_ID_GREEN>;
@@ -100,7 +100,7 @@
 			default-state = "off";
 		};
 
-		led@2 {
+		led-2 {
 			label = "apq8016-sbc:green:user2";
 			function = LED_FUNCTION_DISK_ACTIVITY;
 			color = <LED_COLOR_ID_GREEN>;
@@ -109,7 +109,7 @@
 			default-state = "off";
 		};
 
-		led@3 {
+		led-3 {
 			label = "apq8016-sbc:green:user3";
 			function = LED_FUNCTION_DISK_ACTIVITY;
 			color = <LED_COLOR_ID_GREEN>;
@@ -118,7 +118,7 @@
 			default-state = "off";
 		};
 
-		led@4 {
+		led-4 {
 			label = "apq8016-sbc:green:user4";
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
@@ -127,7 +127,7 @@
 			default-state = "off";
 		};
 
-		led@5 {
+		led-5 {
 			label = "apq8016-sbc:yellow:wlan";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_YELLOW>;
@@ -136,7 +136,7 @@
 			default-state = "off";
 		};
 
-		led@6 {
+		led-6 {
 			label = "apq8016-sbc:blue:bt";
 			function = LED_FUNCTION_BLUETOOTH;
 			color = <LED_COLOR_ID_BLUE>;
@@ -157,8 +157,6 @@
 	status = "okay";
 
 	adv_bridge: bridge@39 {
-		status = "okay";
-
 		compatible = "adi,adv7533";
 		reg = <0x39>;
 
@@ -181,7 +179,7 @@
 		pinctrl-names = "default","sleep";
 		pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
 		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
-		#sound-dai-cells = <1>;
+		#sound-dai-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -222,11 +220,17 @@
 &blsp_uart1 {
 	status = "okay";
 	label = "LS-UART0";
+	pinctrl-0 = <&blsp_uart1_default>;
+	pinctrl-1 = <&blsp_uart1_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &blsp_uart2 {
 	status = "okay";
 	label = "LS-UART1";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &camss {
@@ -340,7 +344,7 @@
 			sound-dai = <&lpass MI2S_QUATERNARY>;
 		};
 		codec {
-			sound-dai = <&adv_bridge 0>;
+			sound-dai = <&adv_bridge>;
 		};
 	};
 
@@ -591,6 +595,21 @@
 		"USR_LED_2_CTRL", /* GPIO 120 */
 		"SB_HS_ID";
 
+	blsp_uart1_default: blsp-uart1-default-state {
+		/* TX, RX, CTS_N, RTS_N */
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "blsp_uart1";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	blsp_uart1_sleep: blsp-uart1-sleep-state {
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	sdc2_cd_default: sdc2-cd-default-state {
 		pins = "gpio38";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts b/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
new file mode 100644
index 000000000000..ce75046ffdac
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
@@ -0,0 +1,524 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
+
+/ {
+	model = "Schneider Electric HMIBSC Board";
+	compatible = "schneider,apq8016-hmibsc", "qcom,apq8016";
+
+	aliases {
+		i2c1 = &blsp_i2c6;
+		i2c3 = &blsp_i2c4;
+		i2c4 = &blsp_i2c3;
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart1;
+		serial1 = &blsp_uart2;
+		spi0 = &blsp_spi5;
+		usid0 = &pm8916_0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&msm_key_volp_n_default>;
+		pinctrl-names = "default";
+
+		button {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pm8916_mpps_leds>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+
+	memory@80000000 {
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		ramoops@bff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xbff00000 0x0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			ftrace-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+
+	usb-hub {
+		compatible = "smsc,usb3503";
+		reset-gpios = <&pm8916_gpios 1 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	adv_bridge: bridge@39 {
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,dsi-lanes = <4>;
+		clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+		clock-names = "cec";
+		pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+		avdd-supply = <&pm8916_l6>;
+		a2vdd-supply = <&pm8916_l6>;
+		dvdd-supply = <&pm8916_l6>;
+		pvdd-supply = <&pm8916_l6>;
+		v1p2-supply = <&pm8916_l6>;
+		v3p3-supply = <&pm8916_l17>;
+
+		pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
+		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
+		pinctrl-names = "default","sleep";
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7533_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7533_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&blsp_spi5 {
+	cs-gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <500000>;
+	};
+};
+
+&blsp_uart1 {
+	pinctrl-0 = <&blsp_uart1_default>;
+	pinctrl-1 = <&blsp_uart1_sleep>;
+	pinctrl-names = "default", "sleep";
+	label = "UART0";
+	status = "okay";
+};
+
+&blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_default>;
+	pinctrl-1 = <&blsp_uart2_sleep>;
+	pinctrl-names = "default", "sleep";
+	label = "UART1";
+	status = "okay";
+};
+
+&lpass {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&adv7533_in>;
+};
+
+&pm8916_codec {
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	status = "okay";
+};
+
+&pm8916_gpios {
+	gpio-line-names =
+		"USB_HUB_RESET_N_PM",
+		"USB_SW_SEL_PM",
+		"NC",
+		"NC";
+
+	usb_hub_reset_pm: usb-hub-reset-pm-state {
+		pins = "gpio1";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		input-disable;
+		output-high;
+	};
+
+	usb_hub_reset_pm_device: usb-hub-reset-pm-device-state {
+		pins = "gpio1";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		input-disable;
+		output-low;
+	};
+
+	usb_sw_sel_pm: usb-sw-sel-pm-state {
+		pins = "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-high;
+	};
+
+	usb_sw_sel_pm_device: usb-sw-sel-pm-device-state {
+		pins = "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-low;
+	};
+};
+
+&pm8916_mpps {
+	gpio-line-names =
+		"NC",
+		"WLAN_LED_CTRL",
+		"BT_LED_CTRL",
+		"NC";
+
+	pm8916_mpps_leds: pm8916-mpps-state {
+		pins = "mpp2", "mpp3";
+		function = "digital";
+		output-low;
+	};
+};
+
+&pm8916_resin {
+	linux,code = <KEY_POWER>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sound {
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+	model = "HMIBSC";
+	audio-routing =
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+	status = "okay";
+
+	quaternary-dai-link {
+		link-name = "ADV7533";
+		cpu {
+			sound-dai = <&lpass MI2S_QUATERNARY>;
+		};
+		codec {
+			sound-dai = <&adv_bridge 0>;
+		};
+	};
+
+	primary-dai-link {
+		link-name = "WCD";
+		cpu {
+			sound-dai = <&lpass MI2S_PRIMARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	tertiary-dai-link {
+		link-name = "WCD-Capture";
+		cpu {
+			sound-dai = <&lpass MI2S_TERTIARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&uart1_mux0_rs232_high &uart1_mux1_rs232_low>;
+	pinctrl-names = "default";
+
+	adv7533_int_active: adv533-int-active-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	adv7533_int_suspend: adv7533-int-suspend-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	adv7533_switch_active: adv7533-switch-active-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	adv7533_switch_suspend: adv7533-switch-suspend-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	blsp_uart1_default: blsp-uart1-default-state {
+		/* TX, RX, CTS_N, RTS_N */
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "blsp_uart1";
+		drive-strength = <16>;
+		bias-disable;
+		bootph-all;
+	};
+
+	blsp_uart1_sleep: blsp-uart1-sleep-state {
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	blsp_uart2_default: blsp-uart2-default-state {
+		/* TX, RX */
+		pins = "gpio4", "gpio5";
+		function = "blsp_uart2";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	blsp_uart2_sleep: blsp-uart2-sleep-state {
+		pins = "gpio4", "gpio5";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	msm_key_volp_n_default: msm-key-volp-n-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	/*
+	 * UART1 being the debug console supports various modes of
+	 * operation (RS-232/485/422) controlled via GPIOs configured
+	 * mux as follows:
+	 *
+	 *   gpio100    gpio99    UART mode
+	 *   0          0         loopback
+	 *   0          1         RS-232
+	 *   1          0         RS-485
+	 *   1          1         RS-422
+	 *
+	 * The default mode configured here is RS-232 mode.
+	 */
+	uart1_mux0_rs232_high: uart1-mux0-rs232-state {
+		bootph-all;
+		pins = "gpio99";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-high;
+	};
+
+	uart1_mux1_rs232_low: uart1-mux1-rs232-state {
+		bootph-all;
+		pins = "gpio100";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+	pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
+	pinctrl-names = "default", "device";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	firmware-name = "qcom/apq8016/wcnss.mbn";
+	status = "okay";
+};
+
+&wcnss_ctrl {
+	firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+/* PINCTRL - additions to nodes defined in msm8916.dtsi */
+
+/*
+ * 2mA drive strength is not enough when connecting multiple
+ * I2C devices with different pull up resistors.
+ */
+&blsp_i2c4_default {
+	drive-strength = <16>;
+};
+
+&blsp_i2c6_default {
+	drive-strength = <16>;
+};
+
+/* Enable CoreSight */
+&cti0 { status = "okay"; };
+&cti1 { status = "okay"; };
+&cti12 { status = "okay"; };
+&cti13 { status = "okay"; };
+&cti14 { status = "okay"; };
+&cti15 { status = "okay"; };
+&debug0 { status = "okay"; };
+&debug1 { status = "okay"; };
+&debug2 { status = "okay"; };
+&debug3 { status = "okay"; };
+&etf { status = "okay"; };
+&etm0 { status = "okay"; };
+&etm1 { status = "okay"; };
+&etm2 { status = "okay"; };
+&etm3 { status = "okay"; };
+&etr { status = "okay"; };
+&funnel0 { status = "okay"; };
+&funnel1 { status = "okay"; };
+&replicator { status = "okay"; };
+&stm { status = "okay"; };
+&tpiu { status = "okay"; };
diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
index 4f82bb668616..38c281f0fe65 100644
--- a/arch/arm64/boot/dts/qcom/apq8039-t2.dts
+++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
@@ -116,18 +116,16 @@
 };
 
 &blsp_uart1 {
+	pinctrl-0 = <&blsp_uart1_default>;
+	pinctrl-1 = <&blsp_uart1_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
-&blsp_uart1_default {
-	pins = "gpio0", "gpio1";
-};
-
-&blsp_uart1_sleep {
-	pins = "gpio0", "gpio1";
-};
-
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
@@ -323,6 +321,20 @@
 		"USBC_GPIO7_1V8",	/* GPIO_120 */
 		"NC";
 
+	blsp_uart1_default: blsp-uart1-default-state {
+		pins = "gpio0", "gpio1";
+		function = "blsp_uart1";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	blsp_uart1_sleep: blsp-uart1-sleep-state {
+		pins = "gpio0", "gpio1";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	pinctrl_backlight: backlight-state {
 		pins = "gpio98";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index e8148b3d6c50..5b2e88915c2f 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -953,15 +953,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -1012,10 +1012,7 @@
 &sound {
 	compatible = "qcom,apq8096-sndcard";
 	model = "DB820c";
-	audio-routing = "RX_BIAS", "MCLK",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
+	audio-routing = "RX_BIAS", "MCLK";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
new file mode 100644
index 000000000000..df8d6e5c1f45
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
@@ -0,0 +1,1222 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include "hamoa-iot-som.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Hamoa IoT EVK";
+	compatible = "qcom,hamoa-iot-evk", "qcom,hamoa-iot-som", "qcom,x1e80100";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart21;
+		serial1 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000
+							 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss2_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss2_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	/* Left unused as the retimer is not used on this board. */
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * TODO: These two regulators are actually part of the removable M.2
+	 * card and not the EVK mainboard. Need to describe this differently.
+	 * Functionally it works correctly, because all we need to do is to
+	 * turn on the actual 3.3V supply above.
+	 */
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDX_VPH_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-EVK";
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_woofer>,
+					    <&left_tweeter>,
+					    <&swr0 0>,
+					    <&lpass_wsamacro 0>,
+					    <&right_woofer>,
+					    <&right_tweeter>,
+					    <&swr3 0>,
+					    <&lpass_wsa2macro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	usb-1-ss0-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 168 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 167 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss0_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss0_sbu>;
+			};
+		};
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+		vdd-supply = <&vreg_rtmr2_1p15>;
+		vdd33-supply = <&vreg_rtmr2_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+		vddar-supply = <&vreg_rtmr2_1p15>;
+		vddat-supply = <&vreg_rtmr2_1p15>;
+		vddio-supply = <&vreg_rtmr2_1p8>;
+
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr2_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss2_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss2_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss2_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb5_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb5_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	vddpe-3v3-supply = <&vreg_nvme>;
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+	status = "okay";
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Woofer */
+	left_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Left Tweeter */
+	left_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&swr3 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Right Woofer */
+	right_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Tweeter */
+	right_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb5_reset_n: eusb5-reset-n-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_default: rtmr2-reset-n-active-state {
+		pins = "gpio185";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
+		pins = "gpio189";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
+		pins = "gpio126";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
+		pins = "gpio187";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+		mode-pins {
+			pins = "gpio166";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio168";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_bt_en: wcn-bt-en-state {
+		pins = "gpio116";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio221";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	/* Switches USB signal routing between the USB connector and the Wi-Fi card. */
+	wcn_usb_sw_n: wcn-usb-sw-n-state {
+		pins = "gpio225";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_hsphy {
+	phys = <&smb2360_0_eusb2_repeater>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_hsphy {
+	phys = <&smb2360_1_eusb2_repeater>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_hsphy {
+	phys = <&smb2360_2_eusb2_repeater>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&retimer_ss2_ss_in>;
+};
+
+&usb_2_hsphy {
+	phys = <&eusb5_repeater>;
+
+	pinctrl-0 = <&wcn_usb_sw_n>;
+	pinctrl-names = "default";
+};
+
+&usb_mp_hsphy0 {
+	phys = <&eusb3_repeater>;
+};
+
+&usb_mp_hsphy1 {
+	phys = <&eusb6_repeater>;
+};
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
new file mode 100644
index 000000000000..1aead50b8920
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/ {
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+};
+
+&apps_rsc {
+	/* PMC8380C_B */
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380VE_C */
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380_D */
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380_E */
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380_F */
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380VE_I */
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380VE_J */
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&iris {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/adsp.mbn",
+			"qcom/x1e80100/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/cdsp.mbn",
+			"qcom/x1e80100/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* TPM LP & INT */
+			       <44 4>; /* SPI (TPM) */
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+
+		};
+	};
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
index e636a1cb9b77..df3cbb7c79c4 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -9,6 +9,8 @@
 
 #include "ipq5018.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Qualcomm Technologies, Inc. IPQ5018/AP-RDP432.1-C2";
 	compatible = "qcom,ipq5018-rdp432-c2", "qcom,ipq5018";
@@ -28,6 +30,20 @@
 	status = "okay";
 };
 
+&pcie0 {
+	pinctrl-0 = <&pcie0_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 16 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
 &sdhc_1 {
 	pinctrl-0 = <&sdc_default_state>;
 	pinctrl-names = "default";
@@ -43,6 +59,30 @@
 };
 
 &tlmm {
+	pcie0_default: pcie0-default-state {
+		clkreq-n-pins {
+			pins = "gpio14";
+			function = "pcie0_clk";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio15";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio16";
+			function = "pcie0_wake";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
 	sdc_default_state: sdc-default-state {
 		clk-pins {
 			pins = "gpio9";
@@ -67,6 +107,19 @@
 	};
 };
 
+&usb {
+	status = "okay";
+};
+
+&usb_dwc {
+	dr_mode = "host";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
 &xo_board_clk {
-	clock-frequency = <24000000>;
+	clock-div = <4>;
+	clock-mult = <1>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts
new file mode 100644
index 000000000000..7a25af57749c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "ipq5018.dtsi"
+
+/ {
+	model = "TP-Link Archer AX55 v1";
+	compatible = "tplink,archer-ax55-v1", "qcom,ipq5018";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN_ONLINE;
+			gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN_2GHZ;
+			gpios = <&tlmm 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_USB;
+			gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN_5GHZ;
+			gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	buttons {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button-reset {
+			debounce-interval = <60>;
+			gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+
+		button-wps {
+			debounce-interval = <60>;
+			gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	button_pins: button-pins-state {
+		pins = "gpio25", "gpio31";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	led_pins: led-pins-state {
+		pins = "gpio10", "gpio11", "gpio13", "gpio18", "gpio22",
+		       "gpio38", "gpio39";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	uart_pins: uart-pins-state {
+		pins = "gpio20", "gpio21";
+		function = "blsp0_uart0";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&xo_board_clk {
+	clock-div = <4>;
+	clock-mult = <1>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 38ffdc3cbdcd..f024b3cba33f 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -2,12 +2,15 @@
 /*
  * IPQ5018 SoC device tree source
  *
- * Copyright (c) 2023 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023-2025 The Linux Foundation. All rights reserved.
  */
 
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
 #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
+#include <dt-bindings/clock/qcom,ipq5018-cmn-pll.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -15,14 +18,41 @@
 	#size-cells = <2>;
 
 	clocks {
+		gephy_rx_clk: gephy-rx-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			#clock-cells = <0>;
+		};
+
+		gephy_tx_clk: gephy-tx-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			#clock-cells = <0>;
+		};
+
+		ref_96mhz_clk: ref-96mhz-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&xo_clk>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+		};
+
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 		};
 
 		xo_board_clk: xo-board-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&ref_96mhz_clk>;
+			#clock-cells = <0>;
+		};
+
+		xo_clk: xo-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			clock-frequency = <48000000>;
 		};
 	};
 
@@ -30,23 +60,29 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
-		L2_0: l2-cache {
+		l2_0: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-size = <0x80000>;
@@ -54,9 +90,27 @@
 		};
 	};
 
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm-ipq5018", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x6100>;
 			qcom,sdi-enabled;
 		};
 	};
@@ -82,6 +136,24 @@
 		#size-cells = <2>;
 		ranges;
 
+		bootloader@4a800000 {
+			reg = <0x0 0x4a800000 0x0 0x200000>;
+			no-map;
+		};
+
+		sbl@4aa00000 {
+			reg = <0x0 0x4aa00000 0x0 0x100000>;
+			no-map;
+		};
+
+		smem@4ab00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4ab00000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
 		tz_region: tz@4ac00000 {
 			reg = <0x0 0x4ac00000 0x0 0x200000>;
 			no-map;
@@ -94,6 +166,248 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		usbphy0: phy@5b000 {
+			compatible = "qcom,ipq5018-usb-hsphy";
+			reg = <0x0005b000 0x120>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@7e000 {
+			compatible = "qcom,ipq5018-uniphy-pcie-phy";
+			reg = <0x0007e000 0x800>;
+
+			clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+
+			resets = <&gcc GCC_PCIE1_PHY_BCR>,
+				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
+
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			num-lanes = <1>;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@86000 {
+			compatible = "qcom,ipq5018-uniphy-pcie-phy";
+			reg = <0x00086000 0x1000>;
+
+			clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
+
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
+		mdio0: mdio@88000 {
+			compatible = "qcom,ipq5018-mdio";
+			reg = <0x00088000 0x64>,
+			      <0x019475c4 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_MDIO0_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+
+			status = "disabled";
+
+			ge_phy: ethernet-phy@7 {
+				compatible = "ethernet-phy-id004d.d0c0";
+				reg = <7>;
+
+				resets = <&gcc GCC_GEPHY_MISC_ARES>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			compatible = "qcom,ipq5018-mdio";
+			reg = <0x00090000 0x64>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_MDIO1_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+
+			status = "disabled";
+		};
+
+		cmn_pll: clock-controller@9b000 {
+			compatible = "qcom,ipq5018-cmn-pll";
+			reg = <0x0009b000 0x800>;
+			clocks = <&ref_96mhz_clk>,
+				 <&gcc GCC_CMN_BLK_AHB_CLK>,
+				 <&gcc GCC_CMN_BLK_SYS_CLK>;
+			clock-names = "ref",
+				      "ahb",
+				      "sys";
+			#clock-cells = <1>;
+			assigned-clocks = <&cmn_pll IPQ5018_CMN_PLL_CLK>;
+			assigned-clock-rates-u64 = /bits/ 64 <9600000000>;
+		};
+
+		qfprom: qfprom@a0000 {
+			compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
+			reg = <0x000a0000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_mode: mode@249 {
+				reg = <0x249 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_base1: base1@249 {
+				reg = <0x249 0x2>;
+				bits = <3 8>;
+			};
+
+			tsens_base2: base2@24a {
+				reg = <0x24a 0x2>;
+				bits = <3 8>;
+			};
+
+			tsens_s0_p1: s0-p1@24b {
+				reg = <0x24b 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s0_p2: s0-p2@24c {
+				reg = <0x24c 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@24c {
+				reg = <0x24c 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@24d {
+				reg = <0x24d 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@24e {
+				reg = <0x24e 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@24f {
+				reg = <0x24f 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@24f {
+				reg = <0x24f 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@250 {
+				reg = <0x250 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s4_p1: s4-p1@251 {
+				reg = <0x251 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s4_p2: s4-p2@254 {
+				reg = <0x254 0x1>;
+				bits = <0 6>;
+			};
+		};
+
+		prng: rng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq5018-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>,
+				      <&tsens_base2>,
+				      <&tsens_s0_p1>,
+				      <&tsens_s0_p2>,
+				      <&tsens_s1_p1>,
+				      <&tsens_s1_p2>,
+				      <&tsens_s2_p1>,
+				      <&tsens_s2_p2>,
+				      <&tsens_s3_p1>,
+				      <&tsens_s3_p2>,
+				      <&tsens_s4_p1>,
+				      <&tsens_s4_p2>;
+
+			nvmem-cell-names = "mode",
+					   "base1",
+					   "base2",
+					   "s0_p1",
+					   "s0_p2",
+					   "s1_p1",
+					   "s1_p2",
+					   "s2_p1",
+					   "s2_p2",
+					   "s3_p1",
+					   "s3_p2",
+					   "s4_p1",
+					   "s4_p2";
+
+			interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "uplow";
+			#qcom,sensors = <5>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		cryptobam: dma-controller@704000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x00704000 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@73a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x0073a000 0x6000>;
+
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			dmas = <&cryptobam 2>,
+			       <&cryptobam 3>;
+			dma-names = "rx",
+				    "tx";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5018-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -117,16 +431,26 @@
 			reg = <0x01800000 0x80000>;
 			clocks = <&xo_board_clk>,
 				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&gephy_rx_clk>,
+				 <&gephy_tx_clk>,
 				 <0>,
 				 <0>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-			#power-domain-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq5018", "syscon";
+			reg = <0x01937000 0x21000>;
 		};
 
 		sdhc_1: mmc@7804000 {
@@ -146,6 +470,16 @@
 			status = "disabled";
 		};
 
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1d000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
 		blsp1_uart1: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x078af000 0x200>;
@@ -156,6 +490,124 @@
 			status = "disabled";
 		};
 
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		qpic_bam: dma-controller@7984000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x07984000 0x1c000>;
+
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "bam_clk";
+
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			status = "disabled";
+		};
+
+		qpic_nand: spi@79b0000 {
+			compatible = "qcom,ipq5018-snand", "qcom,ipq9574-snand";
+			reg = <0x079b0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>,
+				 <&gcc GCC_QPIC_IO_MACRO_CLK>;
+			clock-names = "core",
+				      "aon",
+				      "iom";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx",
+				    "rx",
+				    "cmd";
+
+			status = "disabled";
+		};
+
+		usb: usb@8af8800 {
+			compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			clocks = <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			resets = <&gcc GCC_USB0_BCR>;
+
+			qcom,select-utmi-as-pipe-clk;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			usb_dwc: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x08a00000 0xe000>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phy-names = "usb2-phy";
+				phys = <&usbphy0>;
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,  /* GICD */
@@ -189,6 +641,24 @@
 			clocks = <&sleep_clk>;
 		};
 
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq5018-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a53pll>, <&xo_board_clk>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
+			#mbox-cells = <1>;
+		};
+
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq5018-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board_clk>;
+			clock-names = "xo";
+		};
+
 		timer@b120000 {
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0b120000 0x1000>;
@@ -246,6 +716,272 @@
 				status = "disabled";
 			};
 		};
+
+		pcie1: pcie@80000000 {
+			compatible = "qcom,pcie-ipq5018";
+			reg = <0x80000000 0xf1d>,
+			      <0x80000f20 0xa8>,
+			      <0x80001000 0x1000>,
+			      <0x00078000 0x3000>,
+			      <0x80100000 0x1000>,
+			      <0x0007b000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			/* The controller supports Gen3, but the connected PHY is Gen2-capable */
+			max-link-speed = <2>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			ranges = <0x01000000 0 0x00000000 0x80200000 0 0x00100000>,
+				 <0x02000000 0 0x80300000 0x80300000 0 0x10000000>;
+
+			msi-map = <0x0 &v2m0 0x0 0xff8>;
+
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
+				 <&gcc GCC_PCIE1_AXI_M_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_AUX_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "aux",
+				      "axi_bridge";
+
+			resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+				 <&gcc GCC_PCIE1_SLEEP_ARES>,
+				 <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE1_AHB_ARES>,
+				 <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_SLAVE_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky",
+				      "axi_s_sticky";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0: pcie@a0000000 {
+			compatible = "qcom,pcie-ipq5018";
+			reg = <0xa0000000 0xf1d>,
+			      <0xa0000f20 0xa8>,
+			      <0xa0001000 0x1000>,
+			      <0x00080000 0x3000>,
+			      <0xa0100000 0x1000>,
+			      <0x00083000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			/* The controller supports Gen3, but the connected PHY is Gen2-capable */
+			max-link-speed = <2>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			ranges = <0x01000000 0 0x00000000 0xa0200000 0 0x00100000>,
+				 <0x02000000 0 0xa0300000 0xa0300000 0 0x10000000>;
+
+			msi-map = <0x0 &v2m0 0x0 0xff8>;
+
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+				 <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_AUX_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "aux",
+				      "axi_bridge";
+
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_SLEEP_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky",
+				      "axi_s_sticky";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu_alert: cpu-passive {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gephy-thermal {
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				gephy-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				top-glue-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi32-thermal {
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				ubi32-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
index 4870cdb764d0..b37ae7749083 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
@@ -9,6 +9,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "ipq5332.dtsi"
 
 / {
@@ -39,6 +40,8 @@
 		pinctrl-names = "default";
 
 		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
 			gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tx";
 			default-state = "off";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
index e89e2e948603..79ec77cfe552 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -32,6 +32,34 @@
 	status = "okay";
 };
 
+&pcie0 {
+	pinctrl-0 = <&pcie0_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pcie1_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
 &tlmm {
 	i2c_1_pins: i2c-1-state {
 		pins = "gpio29", "gpio30";
@@ -40,6 +68,54 @@
 		bias-pull-up;
 	};
 
+	pcie0_default: pcie0-default-state {
+		clkreq-n-pins {
+			pins = "gpio37";
+			function = "pcie0_clk";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio39";
+			function = "pcie0_wake";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default: pcie1-default-state {
+		clkreq-n-pins {
+			pins = "gpio46";
+			function = "pcie1_clk";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio47";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio48";
+			function = "pcie1_wake";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
 	sdc_default_state: sdc-default-state {
 		clk-pins {
 			pins = "gpio13";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
index efd480a7afdf..ed8a54eb95c0 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
index eb1fa33d6fe4..d5f99e741ae5 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index d3fef2f80a81..45fc512a3bab 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/clock/qcom,apss-ipq.h>
 #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+#include <dt-bindings/interconnect/qcom,ipq5332.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -30,47 +31,47 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			operating-points-v2 = <&cpu_opp_table>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			operating-points-v2 = <&cpu_opp_table>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			operating-points-v2 = <&cpu_opp_table>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			operating-points-v2 = <&cpu_opp_table>;
 		};
 
-		L2_0: l2-cache {
+		l2_0: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
@@ -91,11 +92,19 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
 
-		opp-1488000000 {
-			opp-hz = /bits/ 64 <1488000000>;
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -163,15 +172,126 @@
 			reg = <0x000a4000 0x721>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@1d {
+				reg = <0x1d 0x2>;
+				bits = <7 2>;
+			};
+
+			tsens_sens11_off: s11@3a5 {
+				reg = <0x3a5 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens12_off: s12@3a6 {
+				reg = <0x3a6 0x1>;
+				bits = <0 4>;
+			};
+
+			tsens_sens13_off: s13@3a6 {
+				reg = <0x3a6 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens14_off: s14@3ad {
+				reg = <0x3ad 0x2>;
+				bits = <7 4>;
+			};
+
+			tsens_sens15_off: s15@3ae {
+				reg = <0x3ae 0x1>;
+				bits = <3 4>;
+			};
+
+			tsens_mode: mode@3e1 {
+				reg = <0x3e1 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_base0: base0@3e1 {
+				reg = <0x3e1 0x2>;
+				bits = <3 10>;
+			};
+
+			tsens_base1: base1@3e2 {
+				reg = <0x3e2 0x2>;
+				bits = <5 10>;
+			};
 		};
 
 		rng: rng@e3000 {
-			compatible = "qcom,prng-ee";
+			compatible = "qcom,ipq5332-trng", "qcom,trng";
 			reg = <0x000e3000 0x1000>;
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
 
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq5332-tsens";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base0>,
+				      <&tsens_base1>,
+				      <&tsens_sens11_off>,
+				      <&tsens_sens12_off>,
+				      <&tsens_sens13_off>,
+				      <&tsens_sens14_off>,
+				      <&tsens_sens15_off>;
+			nvmem-cell-names = "mode",
+					   "base0",
+					   "base1",
+					   "tsens_sens11_off",
+					   "tsens_sens12_off",
+					   "tsens_sens13_off",
+					   "tsens_sens14_off",
+					   "tsens_sens15_off";
+			#qcom,sensors = <5>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		pcie0_phy: phy@4b0000 {
+			compatible = "qcom,ipq5332-uniphy-pcie-phy";
+			reg = <0x004b0000 0x800>;
+
+			clocks = <&gcc GCC_PCIE3X1_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE3X1_PHY_AHB_CLK>;
+
+			resets = <&gcc GCC_PCIE3X1_0_PHY_BCR>,
+				 <&gcc GCC_PCIE3X1_PHY_AHB_CLK_ARES>,
+				 <&gcc GCC_PCIE3X1_0_PHY_PHY_BCR>;
+
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
+			num-lanes = <1>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@4b1000 {
+			compatible = "qcom,ipq5332-uniphy-pcie-phy";
+			reg = <0x004b1000 0x1000>;
+
+			clocks = <&gcc GCC_PCIE3X2_PIPE_CLK>,
+				 <&gcc GCC_PCIE3X2_PHY_AHB_CLK>;
+
+			resets = <&gcc GCC_PCIE3X2_PHY_BCR>,
+				 <&gcc GCC_PCIE3X2_PHY_AHB_CLK_ARES>,
+				 <&gcc GCC_PCIE3X2PHY_PHY_BCR>;
+
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5332-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -195,11 +315,11 @@
 			reg = <0x01800000 0x80000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-			#power-domain-cells = <1>;
+			#interconnect-cells = <1>;
 			clocks = <&xo_board>,
 				 <&sleep_clk>,
-				 <0>,
-				 <0>,
+				 <&pcie1_phy>,
+				 <&pcie0_phy>,
 				 <0>;
 		};
 
@@ -307,15 +427,17 @@
 			compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
 			reg = <0x08af8800 0x400>;
 
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
 
 			clocks = <&gcc GCC_USB0_MASTER_CLK>,
-				 <&gcc GCC_SNOC_USB_CLK>,
 				 <&gcc GCC_USB0_SLEEP_CLK>,
 				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 			clock-names = "core",
-				      "iface",
 				      "sleep",
 				      "mock_utmi";
 
@@ -326,6 +448,9 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			interconnects = <&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>,
+					<&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>;
+			interconnect-names = "usb-ddr", "apps-usb";
 
 			status = "disabled";
 
@@ -390,8 +515,8 @@
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo_board>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo_board>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
@@ -460,6 +585,283 @@
 				status = "disabled";
 			};
 		};
+
+		pcie1: pcie@18000000 {
+			compatible = "qcom,pcie-ipq5332", "qcom,pcie-ipq9574";
+			reg = <0x18000000 0xf1c>,
+			      <0x18000f20 0xa8>,
+			      <0x18001000 0x1000>,
+			      <0x00088000 0x3000>,
+			      <0x18100000 0x1000>,
+			      <0x0008b000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x18300000 0x18300000 0x0 0x07d00000>;
+
+			msi-map = <0x0 &v2m0 0x0 0xffd>;
+
+			interrupts = <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE3X2_AXI_M_CLK>,
+				 <&gcc GCC_PCIE3X2_AXI_S_CLK>,
+				 <&gcc GCC_PCIE3X2_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE3X2_RCHG_CLK>,
+				 <&gcc GCC_PCIE3X2_AHB_CLK>,
+				 <&gcc GCC_PCIE3X2_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE3X2_AUX_CLK>;
+
+			assigned-clock-rates = <2000000>;
+
+			resets = <&gcc GCC_PCIE3X2_PIPE_ARES>,
+				 <&gcc GCC_PCIE3X2_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X2_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X2_AXI_S_CLK_ARES>,
+				 <&gcc GCC_PCIE3X2_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X2_AXI_M_CLK_ARES>,
+				 <&gcc GCC_PCIE3X2_AUX_CLK_ARES>,
+				 <&gcc GCC_PCIE3X2_AHB_CLK_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			interconnects = <&gcc MASTER_SNOC_PCIE3_2_M &gcc SLAVE_SNOC_PCIE3_2_M>,
+					<&gcc MASTER_ANOC_PCIE3_2_S &gcc SLAVE_ANOC_PCIE3_2_S>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0: pcie@20000000 {
+			compatible = "qcom,pcie-ipq5332", "qcom,pcie-ipq9574";
+			reg = <0x20000000 0xf1c>,
+			      <0x20000f20 0xa8>,
+			      <0x20001000 0x1000>,
+			      <0x00080000 0x3000>,
+			      <0x20100000 0x1000>,
+			      <0x00083000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x20200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x20300000 0x20300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &v2m0 0x0 0xffd>;
+
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE3X1_0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE3X1_0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE3X1_0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE3X1_0_RCHG_CLK>,
+				 <&gcc GCC_PCIE3X1_0_AHB_CLK>,
+				 <&gcc GCC_PCIE3X1_0_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE3X1_0_AUX_CLK>;
+
+			assigned-clock-rates = <2000000>;
+
+			resets = <&gcc GCC_PCIE3X1_0_PIPE_ARES>,
+				 <&gcc GCC_PCIE3X1_0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AXI_S_CLK_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AXI_M_CLK_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AUX_CLK_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AHB_CLK_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			interconnects = <&gcc MASTER_SNOC_PCIE3_1_M &gcc SLAVE_SNOC_PCIE3_1_M>,
+					<&gcc MASTER_ANOC_PCIE3_1_S &gcc SLAVE_ANOC_PCIE3_1_S>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+	};
+
+	thermal-zones {
+		rfa-0-thermal {
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				rfa-0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		rfa-1-thermal {
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				rfa-1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		misc-thermal {
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				misc-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-top-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				cpu-top-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				top-glue-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
new file mode 100644
index 000000000000..738618551203
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5424 RDP466 board device tree source
+ *
+ * Copyright (c) 2024-2025 The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq5424.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5424 RDP466";
+	compatible = "qcom,ipq5424-rdp466", "qcom,ipq5424";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
+	vreg_misc_3p3: regulator-usb-3p3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "usb_hs_vdda_3p3";
+	};
+
+	vreg_misc_1p8: regulator-usb-1p8 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "vdda_1p8_usb";
+	};
+
+	vreg_misc_0p925: regulator-usb-0p925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "vdd_core_usb";
+	};
+};
+
+&dwc_0 {
+	dr_mode = "host";
+};
+
+&dwc_1 {
+	dr_mode = "host";
+};
+
+&pcie2 {
+	pinctrl-0 = <&pcie2_default_state>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie2_phy {
+	status = "okay";
+};
+
+&pcie3 {
+	pinctrl-0 = <&pcie3_default_state>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie3_phy {
+	status = "okay";
+};
+
+&qusb_phy_0 {
+	vdd-supply = <&vreg_misc_0p925>;
+	vdda-pll-supply = <&vreg_misc_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
+
+	status = "okay";
+};
+
+&qusb_phy_1 {
+	vdd-supply = <&vreg_misc_0p925>;
+	vdda-pll-supply = <&vreg_misc_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
+
+	status = "okay";
+};
+
+&sdhc {
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&ssphy_0 {
+	vdda-pll-supply = <&vreg_misc_1p8>;
+	vdda-phy-supply = <&vreg_misc_0p925>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio19";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio42";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+
+	spi0_default_state: spi0-default-state {
+		clk-pins {
+			pins = "gpio6";
+			function = "spi0_clk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		cs-pins {
+			pins = "gpio7";
+			function = "spi0_cs";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		miso-pins {
+			pins = "gpio8";
+			function = "spi0_miso";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mosi-pins {
+			pins = "gpio9";
+			function = "spi0_mosi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio5";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio4";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	uart0_pins: uart0-default-state {
+		pins = "gpio10", "gpio11", "gpio12", "gpio13";
+		function = "uart0";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+
+	pcie2_default_state: pcie2-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	pcie3_default_state: pcie3-default-state {
+		pins = "gpio34";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	/*
+	 * The required initialization for this SE is not handled by the
+	 * bootloader. Therefore, keep the device in "reserved" state until
+	 * linux gains support for configuring the SE.
+	 */
+	status = "reserved";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+/*
+ * The bootstrap pins for the board select the XO clock frequency that
+ * supports 48 MHZ, 96 MHZ or 192 MHZ. This setting automatically
+ * enables the right dividers, to ensure the reference clock output
+ * from WiFi to the CMN PLL is 48 MHZ.
+ */
+&ref_48mhz_clk {
+	clock-div = <1>;
+	clock-mult = <1>;
+};
+
+/*
+ * The frequency of xo_board is fixed to 24 MHZ, which is routed
+ * from WiFi output clock 48 MHZ divided by 2.
+ */
+&xo_board {
+	clock-div = <2>;
+	clock-mult = <1>;
+};
+
+&xo_clk {
+	clock-frequency = <48000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
new file mode 100644
index 000000000000..ef2b52f3597d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -0,0 +1,1354 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ5424 device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/clock/qcom,ipq5424-cmn-pll.h>
+#include <dt-bindings/clock/qcom,ipq5424-gcc.h>
+#include <dt-bindings/reset/qcom,ipq5424-gcc.h>
+#include <dt-bindings/interconnect/qcom,ipq5424.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		ref_48mhz_clk: ref-48mhz-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&xo_clk>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board: xo-board-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&ref_48mhz_clk>;
+			#clock-cells = <0>;
+		};
+
+		xo_clk: xo-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+
+				l3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x100>;
+			next-level-cache = <&l2_100>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
+
+			l2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x200>;
+			next-level-cache = <&l2_200>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
+
+			l2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x300>;
+			next-level-cache = <&l2_300>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
+
+			l2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq5424", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x25100>;
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2-kryo-cpu";
+		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x3>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x3>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <984000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1272000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-dsu {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bootloader@8a200000 {
+			reg = <0x0 0x8a200000 0x0 0x400000>;
+			no-map;
+		};
+
+		tz@8a600000 {
+			reg = <0x0 0x8a600000 0x0 0x200000>;
+			no-map;
+		};
+
+		smem@8a800000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x8a800000 0x0 0x32000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		tfa@8a832000 {
+			reg = <0x0 0x8a832000 0x0 0x7d000>;
+			no-map;
+			status = "disabled";
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		pcie0_phy: phy@84000 {
+			compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x00084000 0x0 0x1000>;
+			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie0_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@8c000 {
+			compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x0008c000 0x0 0x1000>;
+			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE1_PHY_BCR>,
+				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie1_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		cmn_pll: clock-controller@9b000 {
+			compatible = "qcom,ipq5424-cmn-pll";
+			reg = <0 0x0009b000 0 0x800>;
+			clocks = <&ref_48mhz_clk>,
+				 <&gcc GCC_CMN_12GPLL_AHB_CLK>,
+				 <&gcc GCC_CMN_12GPLL_SYS_CLK>;
+			clock-names = "ref", "ahb", "sys";
+			#clock-cells = <1>;
+			assigned-clocks = <&cmn_pll IPQ5424_CMN_PLL_CLK>;
+			assigned-clock-rates-u64 = /bits/ 64 <12000000000>;
+		};
+
+		efuse@a4000 {
+			compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
+			reg = <0 0x000a4000 0 0x741>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_sens9_off: s9@3dc {
+				reg = <0x3dc 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens10_off: s10@3dd {
+				reg = <0x3dd 0x1>;
+				bits = <0 4>;
+			};
+
+			tsens_sens11_off: s11@3dd {
+				reg = <0x3dd 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens12_off: s12@3de {
+				reg = <0x3de 0x1>;
+				bits = <0 4>;
+			};
+
+			tsens_sens13_off: s13@3de {
+				reg = <0x3de 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens14_off: s14@3e5 {
+				reg = <0x3e5 0x2>;
+				bits = <7 4>;
+			};
+
+			tsens_sens15_off: s15@3e6 {
+				reg = <0x3e6 0x1>;
+				bits = <3 4>;
+			};
+
+			tsens_mode: mode@419 {
+				reg = <0x419 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_base0: base0@419 {
+				reg = <0x419 0x2>;
+				bits = <3 10>;
+			};
+
+			tsens_base1: base1@41a {
+				reg = <0x41a 0x2>;
+				bits = <5 10>;
+			};
+		};
+
+		pcie2_phy: phy@f4000 {
+			compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x000f4000 0x0 0x2000>;
+			clocks = <&gcc GCC_PCIE2_AUX_CLK>,
+				 <&gcc GCC_PCIE2_AHB_CLK>,
+				 <&gcc GCC_PCIE2_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE2_PHY_BCR>,
+				 <&gcc GCC_PCIE2PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie2_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie3_phy: phy@fc000 {
+			compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x000fc000 0x0 0x2000>;
+			clocks = <&gcc GCC_PCIE3_AUX_CLK>,
+				 <&gcc GCC_PCIE3_AHB_CLK>,
+				 <&gcc GCC_PCIE3_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE3_PHY_BCR>,
+				 <&gcc GCC_PCIE3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie3_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq5424-tsens";
+			reg = <0 0x004a9000 0 0x1000>,
+			      <0 0x004a8000 0 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "combined";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base0>,
+				      <&tsens_base1>,
+				      <&tsens_sens9_off>,
+				      <&tsens_sens10_off>,
+				      <&tsens_sens11_off>,
+				      <&tsens_sens12_off>,
+				      <&tsens_sens13_off>,
+				      <&tsens_sens14_off>,
+				      <&tsens_sens15_off>;
+			nvmem-cell-names = "mode",
+					   "base0",
+					   "base1",
+					   "tsens_sens9_off",
+					   "tsens_sens10_off",
+					   "tsens_sens11_off",
+					   "tsens_sens12_off",
+					   "tsens_sens13_off",
+					   "tsens_sens14_off",
+					   "tsens_sens15_off";
+			#qcom,sensors = <7>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		rng: rng@4c3000 {
+			compatible = "qcom,ipq5424-trng", "qcom,trng";
+			reg = <0 0x004c3000 0 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		system-cache-controller@800000 {
+			compatible = "qcom,ipq5424-llcc";
+			reg = <0 0x00800000 0 0x200000>;
+			reg-names = "llcc0_base";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		qfprom@a6000 {
+			compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
+			reg = <0x0 0x000a6000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@234 {
+				reg = <0x234 0x1>;
+				bits = <0 8>;
+			};
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq5424-tlmm";
+			reg = <0 0x01000000 0 0x300000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 50>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart1_pins: uart1-state {
+				pins = "gpio43", "gpio44";
+				function = "uart1";
+				drive-strength = <8>;
+				bias-pull-up;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq5424-gcc";
+			reg = <0 0x01800000 0 0x40000>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&pcie2_phy>,
+				 <&pcie3_phy>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#interconnect-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01905000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq5424", "syscon";
+			reg = <0 0x01937000 0 0x2a000>;
+		};
+
+		qupv3: geniqup@1ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x01ac0000 0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>,
+				 <&gcc GCC_QUPV3_AHB_SLV_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			uart0: serial@1a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x01a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_UART0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			uart1: serial@1a84000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x01a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_UART1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			spi0: spi@1a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x01a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_SPI0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@1a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x01a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_SPI1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		sdhc: mmc@7804000 {
+			compatible = "qcom,ipq5424-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x07804000 0 0x1000>, <0 0x07805000 0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			supports-cqe;
+
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0xf200000 0 0x10000>, /* GICD */
+			      <0 0xf240000 0 0x80000>; /* GICR * 4 regions */
+			#address-cells = <0>;
+			#interrupt-cells = <0x3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			mbi-ranges = <672 128>;
+			msi-controller;
+		};
+
+		watchdog@f410000 {
+			compatible = "qcom,apss-wdt-ipq5424", "qcom,kpss-wdt";
+			reg = <0 0x0f410000 0 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+		};
+
+		qusb_phy_1: phy@71000 {
+			compatible = "qcom,ipq5424-qusb2-phy";
+			reg = <0 0x00071000 0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				<&xo_board>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb2: usb2@1e00000 {
+			compatible = "qcom,ipq5424-dwc3", "qcom,dwc3";
+			reg = <0 0x01ef8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB1_MASTER_CLK>,
+				 <&gcc GCC_USB1_SLEEP_CLK>,
+				 <&gcc GCC_USB1_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_CNOC_USB_CLK>;
+
+			clock-names = "core",
+				      "sleep",
+				      "mock_utmi",
+				      "iface",
+				      "cfg_noc";
+
+			assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
+					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <200000000>,
+					       <24000000>;
+
+			interrupts-extended = <&intc GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			resets = <&gcc GCC_USB1_BCR>;
+			qcom,select-utmi-as-pipe-clk;
+			status = "disabled";
+
+			dwc_1: usb@1e00000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x01e00000 0 0xe000>;
+				clocks = <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>;
+				phy-names = "usb2-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		qusb_phy_0: phy@7b000 {
+			compatible = "qcom,ipq5424-qusb2-phy";
+			reg = <0 0x0007b000 0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				<&xo_board>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		ssphy_0: phy@7d000 {
+			compatible = "qcom,ipq5424-qmp-usb3-phy";
+			reg = <0 0x0007d000 0 0xa00>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&xo_board>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb0_pipe_clk";
+
+			status = "disabled";
+		};
+
+		usb3: usb3@8a00000 {
+			compatible = "qcom,ipq5424-dwc3", "qcom,dwc3";
+			reg = <0 0x08af8800 0 0x400>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_CNOC_USB_CLK>;
+
+			clock-names = "core",
+				      "sleep",
+				      "mock_utmi",
+				      "iface",
+				      "cfg_noc";
+
+			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <200000000>,
+					       <24000000>;
+
+			interrupts-extended = <&intc GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			resets = <&gcc GCC_USB_BCR>;
+			status = "disabled";
+
+			dwc_0: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x08a00000 0 0xcd00>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+			};
+		};
+
+		timer@f420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0xf420000 0 0x1000>;
+			ranges = <0 0 0 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@f421000 {
+				reg = <0xf421000 0x1000>,
+				      <0xf422000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@f423000 {
+				reg = <0xf423000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@f425000 {
+				reg = <0xf425000 0x1000>,
+				      <0xf426000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@f427000 {
+				reg = <0xf427000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@f429000 {
+				reg = <0xf429000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@f42b000 {
+				reg = <0xf42b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@f42d000 {
+				reg = <0xf42d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		apss_clk: clock-controller@fa80000 {
+			compatible = "qcom,ipq5424-apss-clk";
+			reg = <0x0 0x0fa80000 0x0 0x20000>;
+			clocks = <&xo_board>,
+				 <&gcc GPLL0>;
+			#clock-cells = <1>;
+			#interconnect-cells = <1>;
+		};
+
+		pcie3: pcie@40000000 {
+			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
+			reg = <0x0 0x40000000 0x0 0xf1c>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x000f8000 0x0 0x3000>,
+			      <0x0 0x40100000 0x0 0x1000>,
+			      <0x0 0x000fe000 0x0 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <3>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 480 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 482 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
+				 <&gcc GCC_PCIE3_AXI_S_CLK>,
+				 <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE3_RCHNG_CLK>,
+				 <&gcc GCC_PCIE3_AHB_CLK>,
+				 <&gcc GCC_PCIE3_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE3_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE3_PIPE_ARES>,
+				 <&gcc GCC_PCIE3_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE3_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE3_AXI_S_ARES>,
+				 <&gcc GCC_PCIE3_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE3_AXI_M_ARES>,
+				 <&gcc GCC_PCIE3_AUX_ARES>,
+				 <&gcc GCC_PCIE3_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie3_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>,
+					<&gcc MASTER_CNOC_PCIE3 &gcc SLAVE_CNOC_PCIE3>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie2: pcie@50000000 {
+			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
+			reg = <0x0 0x50000000 0x0 0xf1c>,
+			      <0x0 0x50000f20 0x0 0xa8>,
+			      <0x0 0x50001000 0x0 0x1000>,
+			      <0x0 0x000f0000 0x0 0x3000>,
+			      <0x0 0x50100000 0x0 0x1000>,
+			      <0x0 0x000f6000 0x0 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x50200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x50300000 0x0 0x50300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
+				 <&gcc GCC_PCIE2_AXI_S_CLK>,
+				 <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE2_RCHNG_CLK>,
+				 <&gcc GCC_PCIE2_AHB_CLK>,
+				 <&gcc GCC_PCIE2_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE2_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE2_PIPE_ARES>,
+				 <&gcc GCC_PCIE2_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE2_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE2_AXI_S_ARES>,
+				 <&gcc GCC_PCIE2_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE2_AXI_M_ARES>,
+				 <&gcc GCC_PCIE2_AUX_ARES>,
+				 <&gcc GCC_PCIE2_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie2_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>,
+					<&gcc MASTER_CNOC_PCIE2 &gcc SLAVE_CNOC_PCIE2>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie1: pcie@60000000 {
+			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
+			reg = <0x0 0x60000000 0x0 0xf1c>,
+			      <0x0 0x60000f20 0x0 0xa8>,
+			      <0x0 0x60001000 0x0 0x1000>,
+			      <0x0 0x00088000 0x0 0x3000>,
+			      <0x0 0x60100000 0x0 0x1000>,
+			      <0x0 0x0008e000 0x0 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE1_RCHNG_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE1_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+				 <&gcc GCC_PCIE1_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE1_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE1_AXI_S_ARES>,
+				 <&gcc GCC_PCIE1_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE1_AXI_M_ARES>,
+				 <&gcc GCC_PCIE1_AUX_ARES>,
+				 <&gcc GCC_PCIE1_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE1	&gcc SLAVE_ANOC_PCIE1>,
+					<&gcc MASTER_CNOC_PCIE1	&gcc SLAVE_CNOC_PCIE1>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0: pcie@70000000 {
+			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
+			reg = <0x0 0x70000000 0x0 0xf1c>,
+			      <0x0 0x70000f20 0x0 0xa8>,
+			      <0x0 0x70001000 0x0 0x1000>,
+			      <0x0 0x00080000 0x0 0x3000>,
+			      <0x0 0x70100000 0x0 0x1000>,
+			      <0x0 0x00086000 0x0 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE0_RCHNG_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE0_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE0_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE0_AXI_S_ARES>,
+				 <&gcc GCC_PCIE0_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE0_AXI_M_ARES>,
+				 <&gcc GCC_PCIE0_AUX_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>,
+					<&gcc MASTER_CNOC_PCIE0	&gcc SLAVE_CNOC_PCIE0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <9000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <9000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <9000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <9000>;
+					type = "passive";
+				};
+			};
+		};
+
+		wcss-tile2-thermal {
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				wcss-tile2-critical {
+					temperature = <125000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-tile3-thermal {
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				wcss-tile3-critical {
+					temperature = <125000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				top-glue-critical {
+					temperature = <125000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index f5f4827c0e17..9c69d3027b43 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -7,7 +7,7 @@
 
 /dts-v1/;
 
-#include "ipq6018.dtsi"
+#include "ipq6018-mp5496.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1";
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-mp5496.dtsi b/arch/arm64/boot/dts/qcom/ipq6018-mp5496.dtsi
new file mode 100644
index 000000000000..d6b111a77f79
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq6018-mp5496.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * ipq6018-mp5496.dtsi describes common properties (e.g. regulators) that
+ * apply to most devices that make use of the IPQ6018 SoC and MP5496 PMIC.
+ */
+
+#include "ipq6018.dtsi"
+
+&cpu0 {
+	cpu-supply = <&mp5496_s2>;
+};
+
+&cpu1 {
+	cpu-supply = <&mp5496_s2>;
+};
+
+&cpu2 {
+	cpu-supply = <&mp5496_s2>;
+};
+
+&cpu3 {
+	cpu-supply = <&mp5496_s2>;
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		mp5496_s2: s2 {
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1062500>;
+			regulator-always-on;
+		};
+
+		mp5496_l2: l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+};
+
+&sdhc {
+	vqmmc-supply = <&mp5496_l2>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index e59b9df96c7e..40f1c262126e 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/clock/qcom,gcc-ipq6018.h>
 #include <dt-bindings/reset/qcom,gcc-ipq6018.h>
 #include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	#address-cells = <2>;
@@ -33,55 +34,55 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq6018_s2>;
+			#cooling-cells = <2>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			enable-method = "psci";
 			reg = <0x1>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq6018_s2>;
+			#cooling-cells = <2>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			enable-method = "psci";
 			reg = <0x2>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq6018_s2>;
+			#cooling-cells = <2>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			enable-method = "psci";
 			reg = <0x3>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq6018_s2>;
+			#cooling-cells = <2>;
 		};
 
-		L2_0: l2-cache {
+		l2_0: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
@@ -96,42 +97,63 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&cpu_speed_bin>;
 		opp-shared;
 
 		opp-864000000 {
 			opp-hz = /bits/ 64 <864000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x4>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1320000000 {
 			opp-hz = /bits/ 64 <1320000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x3>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <937500>;
+			opp-supported-hw = <0x2>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1608000000 {
 			opp-hz = /bits/ 64 <1608000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -156,18 +178,8 @@
 			mboxes = <&apcs_glb 0>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-ipq6018";
+				compatible = "qcom,rpm-ipq6018", "qcom,glink-smd-rpm";
 				qcom,glink-channels = "rpm_requests";
-
-				regulators {
-					compatible = "qcom,rpm-mp5496-regulators";
-
-					ipq6018_s2: s2 {
-						regulator-min-microvolt = <725000>;
-						regulator-max-microvolt = <1062500>;
-						regulator-always-on;
-					};
-				};
 			};
 		};
 	};
@@ -198,8 +210,11 @@
 		};
 
 		smem_region: memory@4aa00000 {
+			compatible = "qcom,smem";
 			reg = <0x0 0x4aa00000 0x0 0x100000>;
 			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
 		};
 
 		q6_region: memory@4ab00000 {
@@ -208,12 +223,6 @@
 		};
 	};
 
-	smem {
-		compatible = "qcom,smem";
-		memory-region = <&smem_region>;
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -236,31 +245,26 @@
 
 		ssphy_0: ssphy@78000 {
 			compatible = "qcom,ipq6018-qmp-usb3-phy";
-			reg = <0x0 0x00078000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x00078000 0x0 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "gcc_usb0_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
-				      <0x0 0x00078400 0x0 0x200>, /* Rx */
-				      <0x0 0x00078800 0x0 0x1f8>, /* PCS */
-				      <0x0 0x00078600 0x0 0x044>; /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "gcc_usb0_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: qusb@79000 {
@@ -314,6 +318,11 @@
 			reg = <0x0 0x000a4000 0x0 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@135 {
+				reg = <0x135 0x1>;
+				bits = <7 1>;
+			};
 		};
 
 		prng: qrng@e3000 {
@@ -323,6 +332,16 @@
 			clock-names = "core";
 		};
 
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq6018-tsens", "qcom,ipq8074-tsens";
+			reg = <0x0 0x004a9000 0x0 0x1000>,
+			      <0x0 0x004a8000 0x0 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		cryptobam: dma-controller@704000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0 0x00704000 0x0 0x20000>;
@@ -374,7 +393,7 @@
 			};
 		};
 
-		gcc: gcc@1800000 {
+		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-ipq6018";
 			reg = <0x0 0x01800000 0x0 0x80000>;
 			clocks = <&xo>, <&sleep_clk>;
@@ -411,6 +430,12 @@
 					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
 			assigned-clock-rates = <133330000>,
 					       <24000000>;
+
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy";
+
 			resets = <&gcc GCC_USB1_BCR>;
 			status = "disabled";
 
@@ -429,6 +454,25 @@
 			};
 		};
 
+		sdhc: mmc@7804000 {
+			compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x07804000 0x0 0x1000>,
+			      <0x0 0x07805000 0x0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
+			max-frequency = <192000000>;
+			status = "disabled";
+		};
+
 		blsp_dma: dma-controller@7884000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0 0x07884000 0x0 0x2b000>;
@@ -439,6 +483,26 @@
 			qcom,ee = <0>;
 		};
 
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78af000 0x0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b0000 0x0 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart3: serial@78b1000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x0 0x078b1000 0x0 0x200>;
@@ -449,6 +513,36 @@
 			status = "disabled";
 		};
 
+		blsp1_uart4: serial@78b2000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b2000 0x0 0x200>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart5: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b3000 0x0 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart6: serial@78b4000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b4000 0x0 0x200>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_spi1: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
@@ -477,6 +571,20 @@
 			status = "disabled";
 		};
 
+		blsp1_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b9000 0x0 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c2: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
@@ -507,6 +615,21 @@
 			status = "disabled";
 		};
 
+		blsp1_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078ba000 0x0 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+			       <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp_dma 22>, <&blsp_dma 23>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		qpic_bam: dma-controller@7984000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0 0x07984000 0x0 0x1a000>;
@@ -557,7 +680,14 @@
 					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 			assigned-clock-rates = <133330000>,
 					       <133330000>,
-					       <20000000>;
+					       <24000000>;
+
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "ss_phy_irq";
 
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
@@ -566,11 +696,12 @@
 				compatible = "snps,dwc3";
 				reg = <0x0 0x08a00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				clocks = <&xo>;
 				clock-names = "ref";
 				tx-fifo-resize;
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -611,8 +742,8 @@
 			compatible = "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0 0x0b111000 0x0 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
@@ -731,7 +862,7 @@
 			};
 		};
 
-		pcie0: pci@20000000 {
+		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq6018";
 			reg = <0x0 0x20000000 0x0 0xf1d>,
 			      <0x0 0x20000f20 0x0 0xa8>,
@@ -754,15 +885,31 @@
 			ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
 				 <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>;
 
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
@@ -793,6 +940,126 @@
 				      "axi_s_sticky";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+	};
+
+	thermal-zones {
+		nss-top-thermal {
+			polling-delay-passive = <250>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				nss-top-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nss-thermal {
+			polling-delay-passive = <250>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				nss-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-phya0-thermal {
+			polling-delay-passive = <250>;
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				wcss-phya0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-phya1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				wcss-phya1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				cpu-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		lpass-thermal {
+			polling-delay-passive = <250>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				lpass-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddrss-top-thermal {
+			polling-delay-passive = <250>;
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				ddrss-top-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
index 1b8379ba87f9..34e2f80514a3 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -16,7 +16,7 @@
 		stdout-path = "serial0";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0x0 0x20000000>;
 	};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2f275c84e566..256e12cf6d54 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -32,39 +32,39 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			enable-method = "psci";
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			enable-method = "psci";
 			reg = <0x1>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			enable-method = "psci";
 			reg = <0x2>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			enable-method = "psci";
 			reg = <0x3>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 		};
 
-		L2_0: l2-cache {
+		l2_0: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
@@ -125,32 +125,26 @@
 
 		ssphy_1: phy@58000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00058000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00058000 0x1000>;
 
 			clocks = <&gcc GCC_USB1_AUX_CLK>,
-				<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB1_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_1_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB1_PHY_BCR>,
-				<&gcc GCC_USB3PHY_1_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_1_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@58200 {
-				reg = <0x00058200 0x130>,     /* Tx */
-				      <0x00058400 0x200>,     /* Rx */
-				      <0x00058800 0x1f8>,     /* PCS */
-				      <0x00058600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB1_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_1_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_1: phy@59000 {
@@ -168,32 +162,26 @@
 
 		ssphy_0: phy@78000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00078000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00078000 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_0_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
-				<&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x00078200 0x130>,     /* Tx */
-				      <0x00078400 0x200>,     /* Rx */
-				      <0x00078800 0x1f8>,     /* PCS */
-				      <0x00078600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_0_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: phy@79000 {
@@ -264,6 +252,8 @@
 			clocks = <&gcc GCC_MDIO_AHB_CLK>;
 			clock-names = "gcc_mdio_ahb_clk";
 
+			clock-frequency = <6250000>;
+
 			status = "disabled";
 		};
 
@@ -333,6 +323,13 @@
 				bias-disable;
 			};
 
+			serial_5_pins: serial5-state {
+				pins = "gpio9", "gpio16";
+				function = "blsp5_uart";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
 			i2c_0_pins: i2c-0-state {
 				pins = "gpio42", "gpio43";
 				function = "blsp1_i2c";
@@ -359,18 +356,24 @@
 				       "gpio5", "gpio6", "gpio7",
 				       "gpio8", "gpio10", "gpio11",
 				       "gpio12", "gpio13", "gpio14",
-				       "gpio15", "gpio16", "gpio17";
+				       "gpio15", "gpio17";
 				function = "qpic";
 				drive-strength = <8>;
 				bias-disable;
 			};
 		};
 
-		gcc: gcc@1800000 {
+		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-ipq8074";
 			reg = <0x01800000 0x80000>;
-			clocks = <&xo>, <&sleep_clk>;
-			clock-names = "xo", "sleep_clk";
+			clocks = <&xo>,
+				 <&sleep_clk>,
+				 <&pcie_qmp0>,
+				 <&pcie_qmp1>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "pcie0_pipe",
+				      "pcie1_pipe";
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
@@ -406,7 +409,7 @@
 		};
 
 		sdhc_1: mmc@7824900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,ipq8074-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x500>, <0x7824000 0x800>;
 			reg-names = "hc", "core";
 
@@ -475,6 +478,18 @@
 			status = "disabled";
 		};
 
+		blsp1_uart6: serial@78b4000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b4000 0x200>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-0 = <&serial_5_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
 		blsp1_spi1: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
@@ -523,6 +538,20 @@
 			status = "disabled";
 		};
 
+		blsp1_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 18>, <&blsp_dma 19>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c5: i2c@78b9000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
@@ -619,6 +648,13 @@
 						<133330000>,
 						<19200000>;
 
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "ss_phy_irq";
+
 			power-domains = <&gcc USB0_GDSC>;
 
 			resets = <&gcc GCC_USB0_BCR>;
@@ -628,8 +664,9 @@
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -661,6 +698,13 @@
 						<133330000>,
 						<19200000>;
 
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "ss_phy_irq";
+
 			power-domains = <&gcc USB1_GDSC>;
 
 			resets = <&gcc GCC_USB1_BCR>;
@@ -670,8 +714,9 @@
 				compatible = "snps,dwc3";
 				reg = <0x8c00000 0xcd00>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_1>, <&usb1_ssphy>;
+				phys = <&qusb_phy_1>, <&ssphy_1>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -708,8 +753,8 @@
 			compatible = "qcom,ipq8074-apcs-apps-global",
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 
 			#clock-cells = <1>;
 			#mbox-cells = <1>;
@@ -781,7 +826,7 @@
 			};
 		};
 
-		pcie1: pci@10000000 {
+		pcie1: pcie@10000000 {
 			compatible = "qcom,pcie-ipq8074";
 			reg = <0x10000000 0xf1d>,
 			      <0x10000f20 0xa8>,
@@ -802,17 +847,33 @@
 			ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>,   /* I/O */
 				 <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */
 
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 142
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143
+					<0 0 0 2 &intc 0 GIC_SPI 143
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144
+					<0 0 0 3 &intc 0 GIC_SPI 144
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145
+					<0 0 0 4 &intc 0 GIC_SPI 145
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -840,9 +901,19 @@
 				      "ahb",
 				      "axi_m_sticky";
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
-		pcie0: pci@20000000 {
+		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq8074-gen3";
 			reg = <0x20000000 0xf1d>,
 			      <0x20000f20 0xa8>,
@@ -864,17 +935,33 @@
 			ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>,   /* I/O */
 				 <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */
 
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78
+					<0 0 0 2 &intc 0 GIC_SPI 78
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79
+					<0 0 0 3 &intc 0 GIC_SPI 79
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83
+					<0 0 0 4 &intc 0 GIC_SPI 83
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
@@ -905,6 +992,16 @@
 				      "axi_m_sticky",
 				      "axi_s_sticky";
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 	};
 
@@ -919,7 +1016,6 @@
 	thermal-zones {
 		nss-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 4>;
 
@@ -934,7 +1030,6 @@
 
 		nss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -949,7 +1044,6 @@
 
 		nss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 6>;
 
@@ -964,7 +1058,6 @@
 
 		wcss-phya0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 7>;
 
@@ -979,7 +1072,6 @@
 
 		wcss-phya1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 8>;
 
@@ -994,7 +1086,6 @@
 
 		cpu0_thermal: cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 9>;
 
@@ -1009,7 +1100,6 @@
 
 		cpu1_thermal: cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 10>;
 
@@ -1024,7 +1114,6 @@
 
 		cpu2_thermal: cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 11>;
 
@@ -1039,7 +1128,6 @@
 
 		cpu3_thermal: cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 12>;
 
@@ -1054,7 +1142,6 @@
 
 		cluster_thermal: cluster-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 13>;
 
@@ -1069,7 +1156,6 @@
 
 		wcss-phyb0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 14>;
 
@@ -1084,7 +1170,6 @@
 
 		wcss-phyb1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 15>;
 
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
new file mode 100644
index 000000000000..bdb396afb992
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP board common device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq9574.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulator_fixed_3p3: s3300 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_3p3";
+	};
+
+	regulator_fixed_0p925: s0925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_0p925";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+
+		mp5496_l2: l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mp5496_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	qpic_snand_default_state: qpic-snand-default-state {
+		clock-pins {
+			pins = "gpio5";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cs-pins {
+			pins = "gpio4";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qpic_snand_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-ecc-engine = <&qpic_nand>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_qmpphy {
+	vdda-pll-supply = <&mp5496_l5>;
+	vdda-phy-supply = <&regulator_fixed_0p925>;
+
+	status = "okay";
+};
+
+&usb_0_qusbphy {
+	vdd-supply = <&regulator_fixed_0p925>;
+	vdda-pll-supply = <&mp5496_l5>;
+	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+/*
+ * The bootstrap pins for the board select the XO clock frequency
+ * (48 MHZ or 96 MHZ used for different RDP type board). This setting
+ * automatically enables the right dividers, to ensure the reference
+ * clock output from WiFi to the CMN PLL is 48 MHZ.
+ */
+&ref_48mhz_clk {
+	clock-div = <1>;
+	clock-mult = <1>;
+};
+
+/*
+ * The frequency of xo_board_clk is fixed to 24 MHZ, which is routed
+ * from WiFi output clock 48 MHZ divided by 2.
+ */
+&xo_board_clk {
+	clock-div = <2>;
+	clock-mult = <1>;
+};
+
+&xo_clk {
+	clock-frequency = <48000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
index 2b093e02637b..f4f9199d4ab1 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
@@ -8,58 +8,12 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2";
 	compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
 };
 
 &sdhc_1 {
@@ -74,10 +28,6 @@
 	status = "okay";
 };
 
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
 &tlmm {
 	sdc_default_state: sdc-default-state {
 		clk-pins {
@@ -110,15 +60,4 @@
 			bias-pull-down;
 		};
 	};
-
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 877026ccc6e2..5a546a14998b 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -8,144 +8,124 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
 	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
+};
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
+&pcie1_phy {
+	status = "okay";
+};
 
-	regulator_fixed_3p3: s3300 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-name = "fixed_3p3";
-	};
+&pcie1 {
+	pinctrl-0 = <&pcie1_default>;
+	pinctrl-names = "default";
 
-	regulator_fixed_0p925: s0925 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <925000>;
-		regulator-max-microvolt = <925000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-name = "fixed_0p925";
-	};
+	perst-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
 };
 
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
+&pcie2_phy {
 	status = "okay";
 };
 
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
+&pcie2 {
+	pinctrl-0 = <&pcie2_default>;
+	pinctrl-names = "default";
 
-		mp5496_l2: l2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
+	perst-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
 };
 
-&sdhc_1 {
-	pinctrl-0 = <&sdc_default_state>;
-	pinctrl-names = "default";
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	max-frequency = <384000000>;
-	bus-width = <8>;
+&pcie3_phy {
 	status = "okay";
 };
 
-&sleep_clk {
-	clock-frequency = <32000>;
+&pcie3 {
+	pinctrl-0 = <&pcie3_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+	status = "okay";
 };
 
 &tlmm {
-	sdc_default_state: sdc-default-state {
-		clk-pins {
-			pins = "gpio5";
-			function = "sdc_clk";
-			drive-strength = <8>;
-			bias-disable;
+
+	pcie1_default: pcie1-default-state {
+		clkreq-n-pins {
+			pins = "gpio25";
+			function = "pcie1_clk";
+			drive-strength = <6>;
+			bias-pull-up;
 		};
 
-		cmd-pins {
-			pins = "gpio4";
-			function = "sdc_cmd";
+		perst-n-pins {
+			pins = "gpio26";
+			function = "gpio";
 			drive-strength = <8>;
+			bias-pull-down;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio27";
+			function = "pcie1_wake";
+			drive-strength = <6>;
 			bias-pull-up;
 		};
+	};
 
-		data-pins {
-			pins = "gpio0", "gpio1", "gpio2",
-			       "gpio3", "gpio6", "gpio7",
-			       "gpio8", "gpio9";
-			function = "sdc_data";
-			drive-strength = <8>;
+	pcie2_default: pcie2-default-state {
+		clkreq-n-pins {
+			pins = "gpio28";
+			function = "pcie2_clk";
+			drive-strength = <6>;
 			bias-pull-up;
 		};
 
-		rclk-pins {
-			pins = "gpio10";
-			function = "sdc_rclk";
+		perst-n-pins {
+			pins = "gpio29";
+			function = "gpio";
 			drive-strength = <8>;
 			bias-pull-down;
+			output-low;
 		};
-	};
-};
-
-&usb_0_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_0_qmpphy {
-	vdda-pll-supply = <&mp5496_l2>;
-	vdda-phy-supply = <&regulator_fixed_0p925>;
 
-	status = "okay";
-};
-
-&usb_0_qusbphy {
-	vdd-supply = <&regulator_fixed_0p925>;
-	vdda-pll-supply = <&mp5496_l2>;
-	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
+		wake-n-pins {
+			pins = "gpio30";
+			function = "pcie2_wake";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
 
-	status = "okay";
-};
+	pcie3_default: pcie3-default-state {
+		clkreq-n-pins {
+			pins = "gpio31";
+			function = "pcie3_clk";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
 
-&usb3 {
-	status = "okay";
-};
+		perst-n-pins {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			output-low;
+		};
 
-&xo_board_clk {
-	clock-frequency = <24000000>;
+		wake-n-pins {
+			pins = "gpio33";
+			function = "pcie3_wake";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
index c8fa54e1a62c..d36d1078763e 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
@@ -8,73 +8,10 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6";
 	compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
index f01de6628c3b..c30c9fbedf26 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
@@ -8,73 +8,10 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8";
 	compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
index 6efae3426cb8..0dc382f5d5ec 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
@@ -8,73 +8,9 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9";
 	compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 8a72ad4afd03..86c9cb9fffc9 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -3,11 +3,13 @@
  * IPQ9574 SoC device tree source
  *
  * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/clock/qcom,ipq-cmn-pll.h>
 #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+#include <dt-bindings/interconnect/qcom,ipq9574.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/qcom,ipq9574-gcc.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -18,12 +20,24 @@
 	#size-cells = <2>;
 
 	clocks {
+		ref_48mhz_clk: ref-48mhz-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&xo_clk>;
+			#clock-cells = <0>;
+		};
+
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 		};
 
 		xo_board_clk: xo-board-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&ref_48mhz_clk>;
+			#clock-cells = <0>;
+		};
+
+		xo_clk: xo-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 		};
@@ -33,12 +47,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a73";
 			reg = <0x0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
@@ -46,12 +60,12 @@
 			#cooling-cells = <2>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a73";
 			reg = <0x1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
@@ -59,12 +73,12 @@
 			#cooling-cells = <2>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a73";
 			reg = <0x2>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
@@ -72,12 +86,12 @@
 			#cooling-cells = <2>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a73";
 			reg = <0x3>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
@@ -85,7 +99,7 @@
 			#cooling-cells = <2>;
 		};
 
-		L2_0: l2-cache {
+		l2_0: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
@@ -106,42 +120,56 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
 
 		opp-936000000 {
 			opp-hz = /bits/ 64 <936000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1104000000 {
 			opp-hz = /bits/ 64 <1104000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <862500>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1416000000 {
 			opp-hz = /bits/ 64 <1416000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1488000000 {
 			opp-hz = /bits/ 64 <1488000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x5>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-2208000000 {
 			opp-hz = /bits/ 64 <2208000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -166,7 +194,7 @@
 			mboxes = <&apcs_glb 0>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-ipq9574";
+				compatible = "qcom,rpm-ipq9574", "qcom,glink-smd-rpm";
 				qcom,glink-channels = "rpm_requests";
 			};
 		};
@@ -211,18 +239,137 @@
 			reg = <0x00060000 0x6000>;
 		};
 
+		pcie0_phy: phy@84000 {
+			compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
+			reg = <0x00084000 0x1000>;
+
+			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie0_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie2_phy: phy@8c000 {
+			compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy";
+			reg = <0x0008c000 0x2000>;
+
+			clocks = <&gcc GCC_PCIE2_AUX_CLK>,
+				 <&gcc GCC_PCIE2_AHB_CLK>,
+				 <&gcc GCC_PCIE2_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE2_PHY_BCR>,
+				 <&gcc GCC_PCIE2PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie2_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		rng: rng@e3000 {
-			compatible = "qcom,prng-ee";
+			compatible = "qcom,ipq9574-trng", "qcom,trng";
 			reg = <0x000e3000 0x1000>;
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
 
+		mdio: mdio@90000 {
+			compatible = "qcom,ipq9574-mdio", "qcom,ipq4019-mdio";
+			reg = <0x00090000 0x64>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&gcc GCC_MDIO_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+			status = "disabled";
+		};
+
+		pcie3_phy: phy@f4000 {
+			compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy";
+			reg = <0x000f4000 0x2000>;
+
+			clocks = <&gcc GCC_PCIE3_AUX_CLK>,
+				 <&gcc GCC_PCIE3_AHB_CLK>,
+				 <&gcc GCC_PCIE3_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE3_PHY_BCR>,
+				 <&gcc GCC_PCIE3PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie3_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@fc000 {
+			compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
+			reg = <0x000fc000 0x1000>;
+
+			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE1_PHY_BCR>,
+				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie1_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		cmn_pll: clock-controller@9b000 {
+			compatible = "qcom,ipq9574-cmn-pll";
+			reg = <0x0009b000 0x800>;
+			clocks = <&ref_48mhz_clk>,
+				 <&gcc GCC_CMN_12GPLL_AHB_CLK>,
+				 <&gcc GCC_CMN_12GPLL_SYS_CLK>;
+			clock-names = "ref", "ahb", "sys";
+			#clock-cells = <1>;
+			assigned-clocks = <&cmn_pll CMN_PLL_CLK>;
+			assigned-clock-rates-u64 = /bits/ 64 <12000000000>;
+		};
+
 		qfprom: efuse@a4000 {
 			compatible = "qcom,ipq9574-qfprom", "qcom,qfprom";
 			reg = <0x000a4000 0x5a1>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@15 {
+				reg = <0x15 0x2>;
+				bits = <7 2>;
+			};
 		};
 
 		cryptobam: dma-controller@704000 {
@@ -231,6 +378,8 @@
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <1>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 		};
 
@@ -279,14 +428,14 @@
 			clocks = <&xo_board_clk>,
 				 <&sleep_clk>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&pcie2_phy>,
+				 <&pcie3_phy>,
 				 <0>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-			#power-domain-cells = <1>;
+			#interconnect-cells = <1>;
 		};
 
 		tcsr_mutex: hwlock@1905000 {
@@ -302,8 +451,10 @@
 
 		sdhc_1: mmc@7804000 {
 			compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
-			reg-names = "hc", "cqhci";
+			reg = <0x07804000 0x1000>,
+			      <0x07805000 0x1000>,
+			      <0x07808000 0x2000>;
+			reg-names = "hc", "cqhci", "ice";
 
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -311,9 +462,11 @@
 
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board_clk>;
-			clock-names = "iface", "core", "xo";
+				 <&xo_board_clk>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface", "core", "xo", "ice";
 			non-removable;
+			supports-cqe;
 			status = "disabled";
 		};
 
@@ -522,6 +675,33 @@
 			status = "disabled";
 		};
 
+		qpic_bam: dma-controller@7984000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x07984000 0x1c000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		qpic_nand: spi@79b0000 {
+			compatible = "qcom,ipq9574-snand";
+			reg = <0x079b0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>,
+				 <&gcc GCC_QPIC_IO_MACRO_CLK>;
+			clock-names = "core", "aon", "iom";
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+		};
+
 		usb_0_qusbphy: phy@7b000 {
 			compatible = "qcom,ipq9574-qusb2-phy";
 			reg = <0x0007b000 0x180>;
@@ -652,8 +832,8 @@
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a73pll>, <&xo_board_clk>;
-			clock-names = "pll", "xo";
+			clocks = <&a73pll>, <&xo_board_clk>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
@@ -722,12 +902,383 @@
 				status = "disabled";
 			};
 		};
+
+		pcie1: pcie@10000000 {
+			compatible = "qcom,pcie-ipq9574";
+			reg = <0x10000000 0xf1d>,
+			      <0x10000f20 0xa8>,
+			      <0x10001000 0x1000>,
+			      <0x000f8000 0x4000>,
+			      <0x10100000 0x1000>,
+			      <0x000fe000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x10200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x10300000 0x10300000 0x0 0x7d00000>;
+
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE1_RCHNG_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+				 <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_S_ARES>,
+				 <&gcc GCC_PCIE1_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_M_ARES>,
+				 <&gcc GCC_PCIE1_AUX_ARES>,
+				 <&gcc GCC_PCIE1_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE1 &gcc SLAVE_ANOC_PCIE1>,
+					<&gcc MASTER_SNOC_PCIE1 &gcc SLAVE_SNOC_PCIE1>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+			status = "disabled";
+		};
+
+		pcie3: pcie@18000000 {
+			compatible = "qcom,pcie-ipq9574";
+			reg = <0x18000000 0xf1d>,
+			      <0x18000f20 0xa8>,
+			      <0x18001000 0x1000>,
+			      <0x000f0000 0x4000>,
+			      <0x18100000 0x1000>,
+			      <0x000f6000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <3>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x18300000 0x18300000 0x0 0x7d00000>;
+
+			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
+				 <&gcc GCC_PCIE3_AXI_S_CLK>,
+				 <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE3_RCHNG_CLK>,
+				 <&gcc GCC_PCIE3_AHB_CLK>,
+				 <&gcc GCC_PCIE3_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			resets = <&gcc GCC_PCIE3_PIPE_ARES>,
+				 <&gcc GCC_PCIE3_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE3_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE3_AXI_S_ARES>,
+				 <&gcc GCC_PCIE3_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE3_AXI_M_ARES>,
+				 <&gcc GCC_PCIE3_AUX_ARES>,
+				 <&gcc GCC_PCIE3_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie3_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>,
+					<&gcc MASTER_SNOC_PCIE3 &gcc SLAVE_SNOC_PCIE3>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+			status = "disabled";
+		};
+
+		pcie2: pcie@20000000 {
+			compatible = "qcom,pcie-ipq9574";
+			reg = <0x20000000 0xf1d>,
+			      <0x20000f20 0xa8>,
+			      <0x20001000 0x1000>,
+			      <0x00088000 0x4000>,
+			      <0x20100000 0x1000>,
+			      <0x0008e000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x20200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x20300000 0x20300000 0x0 0x7d00000>;
+
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
+				 <&gcc GCC_PCIE2_AXI_S_CLK>,
+				 <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE2_RCHNG_CLK>,
+				 <&gcc GCC_PCIE2_AHB_CLK>,
+				 <&gcc GCC_PCIE2_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			resets = <&gcc GCC_PCIE2_PIPE_ARES>,
+				 <&gcc GCC_PCIE2_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE2_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE2_AXI_S_ARES>,
+				 <&gcc GCC_PCIE2_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE2_AXI_M_ARES>,
+				 <&gcc GCC_PCIE2_AUX_ARES>,
+				 <&gcc GCC_PCIE2_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie2_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>,
+					<&gcc MASTER_SNOC_PCIE2 &gcc SLAVE_SNOC_PCIE2>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+			status = "disabled";
+		};
+
+		pcie0: pcie@28000000 {
+			compatible = "qcom,pcie-ipq9574";
+			reg = <0x28000000 0xf1d>,
+			      <0x28000f20 0xa8>,
+			      <0x28001000 0x1000>,
+			      <0x00080000 0x4000>,
+			      <0x28100000 0x1000>,
+			      <0x00086000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x28200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x28300000 0x28300000 0x0 0x7d00000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE0_RCHNG_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_S_ARES>,
+				 <&gcc GCC_PCIE0_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_M_ARES>,
+				 <&gcc GCC_PCIE0_AUX_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>,
+					<&gcc MASTER_SNOC_PCIE0 &gcc SLAVE_SNOC_PCIE0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+			status = "disabled";
+		};
+
+		nsscc: clock-controller@39b00000 {
+			compatible = "qcom,ipq9574-nsscc";
+			reg = <0x39b00000 0x80000>;
+			clocks = <&xo_board_clk>,
+				 <&cmn_pll NSS_1200MHZ_CLK>,
+				 <&cmn_pll PPE_353MHZ_CLK>,
+				 <&gcc GPLL0_OUT_AUX>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&gcc GCC_NSSCC_CLK>;
+			clock-names = "xo",
+				      "nss_1200",
+				      "ppe_353",
+				      "gpll0_out",
+				      "uniphy0_rx",
+				      "uniphy0_tx",
+				      "uniphy1_rx",
+				      "uniphy1_tx",
+				      "uniphy2_rx",
+				      "uniphy2_tx",
+				      "bus";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#interconnect-cells = <1>;
+		};
 	};
 
 	thermal-zones {
 		nss-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 3>;
 
 			trips {
@@ -740,8 +1291,6 @@
 		};
 
 		ubi-0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 4>;
 
 			trips {
@@ -754,8 +1303,6 @@
 		};
 
 		ubi-1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 5>;
 
 			trips {
@@ -768,8 +1315,6 @@
 		};
 
 		ubi-2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 6>;
 
 			trips {
@@ -782,8 +1327,6 @@
 		};
 
 		ubi-3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 7>;
 
 			trips {
@@ -796,8 +1339,6 @@
 		};
 
 		cpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 8>;
 
 			trips {
@@ -810,8 +1351,6 @@
 		};
 
 		cpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 9>;
 
 			trips {
@@ -824,8 +1363,6 @@
 		};
 
 		cpu0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 10>;
 
 			trips {
@@ -845,17 +1382,15 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu0_alert>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 11>;
 
 			trips {
@@ -875,17 +1410,15 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu1_alert>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 12>;
 
 			trips {
@@ -905,17 +1438,15 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu2_alert>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 13>;
 
 			trips {
@@ -935,17 +1466,15 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu3_alert>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		wcss-phyb-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 14>;
 
 			trips {
@@ -958,8 +1487,6 @@
 		};
 
 		top-glue-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 15>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/lemans-auto.dtsi b/arch/arm64/boot/dts/qcom/lemans-auto.dtsi
new file mode 100644
index 000000000000..8db958d60fd1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-auto.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "lemans.dtsi"
+
+/delete-node/ &pil_camera_mem;
+/delete-node/ &pil_adsp_mem;
+/delete-node/ &q6_adsp_dtb_mem;
+/delete-node/ &q6_gdsp0_dtb_mem;
+/delete-node/ &pil_gdsp0_mem;
+/delete-node/ &pil_gdsp1_mem;
+/delete-node/ &q6_gdsp1_dtb_mem;
+/delete-node/ &q6_cdsp0_dtb_mem;
+/delete-node/ &pil_cdsp0_mem;
+/delete-node/ &pil_gpu_mem;
+/delete-node/ &pil_cdsp1_mem;
+/delete-node/ &q6_cdsp1_dtb_mem;
+/delete-node/ &pil_cvp_mem;
+/delete-node/ &pil_video_mem;
+/delete-node/ &gunyah_md_mem;
+
+/ {
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_ffi_mem: tz-ffi@91c00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x91c00000 0x0 0x1400000>;
+			no-map;
+		};
+
+		pil_camera_mem: pil-camera@95200000 {
+			reg = <0x0 0x95200000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_adsp_mem: pil-adsp@95c00000 {
+			reg = <0x0 0x95c00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gdsp0_mem: pil-gdsp0@97b00000 {
+			reg = <0x0 0x97b00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gdsp1_mem: pil-gdsp1@99900000 {
+			reg = <0x0 0x99900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cdsp0_mem: pil-cdsp0@9b800000 {
+			reg = <0x0 0x9b800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gpu_mem: pil-gpu@9d600000 {
+			reg = <0x0 0x9d600000 0x0 0x2000>;
+			no-map;
+		};
+
+		pil_cdsp1_mem: pil-cdsp1@9d700000 {
+			reg = <0x0 0x9d700000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cvp_mem: pil-cvp@9f500000 {
+			reg = <0x0 0x9f500000 0x0 0x700000>;
+			no-map;
+		};
+
+		pil_video_mem: pil-video@9fc00000 {
+			reg = <0x0 0x9fc00000 0x0 0x700000>;
+			no-map;
+		};
+
+		audio_mdf_mem: audio-mdf-region@ae000000 {
+			reg = <0x0 0xae000000 0x0 0x1000000>;
+			no-map;
+		};
+
+		hyptz_reserved_mem: hyptz-reserved@beb00000 {
+			reg = <0x0 0xbeb00000 0x0 0x11500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@d1900000 {
+			reg = <0x0 0xd1900000 0x0 0x3800000>;
+			no-map;
+		};
+	};
+
+	firmware {
+		scm {
+			memory-region = <&tz_ffi_mem>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-camera-csi1-imx577.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-camera-csi1-imx577.dtso
new file mode 100644
index 000000000000..769befadd4e4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-evk-camera-csi1-imx577.dtso
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	vreg_cam1_1p8: regulator-cam1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_cam1";
+		startup-delay-us = <10000>;
+		enable-active-high;
+		gpio = <&pmm8654au_0_gpios 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&camss {
+	vdda-pll-supply = <&vreg_l1c>;
+	vdda-phy-supply = <&vreg_l4a>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			csiphy1_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep1>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	pinctrl-0 = <&cci1_0_default>;
+	pinctrl-1 = <&cci1_0_sleep>;
+
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@1a {
+		compatible = "sony,imx577";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&cam1_default>;
+		pinctrl-names = "default";
+
+		clocks = <&camcc CAM_CC_MCLK1_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK1_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply = <&vreg_s4a>;
+		avdd-supply = <&vreg_cam1_1p8>;
+
+		port {
+			imx577_ep1: endpoint {
+				clock-lanes = <7>;
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&csiphy1_ep>;
+			};
+		};
+	};
+};
+
+&tlmm {
+	cam1_default: cam1-default-state {
+		mclk-pins {
+			pins = "gpio73";
+			function = "cam_mclk";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rst-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
new file mode 100644
index 000000000000..c7dc9b8f4457
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -0,0 +1,776 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024-2025, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Lemans EVK";
+	compatible = "qcom,lemans-evk", "qcom,qcs9100", "qcom,sa8775p";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		mmc1 = &sdhc;
+		serial0 = &uart10;
+	};
+
+	dmic: audio-codec-0 {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+		num-channels = <1>;
+	};
+
+	max98357a: audio-codec-1 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	edp0-connector {
+		compatible = "dp-connector";
+		label = "EDP0";
+		type = "mini";
+
+		port {
+			edp0_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp0_out>;
+			};
+		};
+	};
+
+	edp1-connector {
+		compatible = "dp-connector";
+		label = "EDP1";
+		type = "mini";
+
+		port {
+			edp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp1_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "qcom,qcs9100-sndcard";
+		model = "LEMANS-EVK";
+
+		pinctrl-0 = <&hs0_mi2s_active>, <&hs2_mi2s_active>;
+		pinctrl-names = "default";
+
+		hs0-mi2s-playback-dai-link {
+			link-name = "HS0 MI2S Playback";
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		hs2-mi2s-capture-dai-link {
+			link-name = "HS2 MI2S Capture";
+
+			codec {
+				sound-dai = <&dmic>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TERTIARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vmmc_sdc: regulator-vmmc-sdc {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vmmc_sdc";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+	};
+
+	vreg_sdc: regulator-vreg-sdc {
+		compatible = "regulator-gpio";
+
+		regulator-name = "vreg_sdc";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpios = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		states = <1800000 1>, <2950000 0>;
+
+		startup-delay-us = <100>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1816000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a: smps5 {
+			regulator-name = "vreg_s5a";
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1996000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9a: smps9 {
+			regulator-name = "vreg_s9a";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s4e: smps4 {
+			regulator-name = "vreg_s4e";
+			regulator-min-microvolt = <970000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7e: smps7 {
+			regulator-name = "vreg_s7e";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9e: smps9 {
+			regulator-name = "vreg_s9e";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <570000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6e: ldo6 {
+			regulator-name = "vreg_l6e";
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8e: ldo8 {
+			regulator-name = "vreg_l8e";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-handle = <&hsgmii_phy0>;
+	phy-mode = "2500base-x";
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+
+	nvmem-cells = <&mac_addr0>;
+	nvmem-cell-names = "mac-address";
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hsgmii_phy0: ethernet-phy@1c {
+			compatible = "ethernet-phy-id004d.d101";
+			reg = <0x1c>;
+			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&i2c18 {
+	status = "okay";
+
+	expander0: gpio@38 {
+		compatible = "ti,tca9538";
+		reg = <0x38>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander1: gpio@39 {
+		compatible = "ti,tca9538";
+		reg = <0x39>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander2: gpio@3a {
+		compatible = "ti,tca9538";
+		reg = <0x3a>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander3: gpio@3b {
+		compatible = "ti,tca9538";
+		reg = <0x3b>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	eeprom@50 {
+		compatible = "giantec,gt24c256c", "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_addr0: mac-addr@0 {
+				reg = <0x0 0x6>;
+			};
+		};
+	};
+};
+
+&iris {
+	firmware-name = "qcom/vpu/vpu30_p4_s6_16mb.mbn";
+
+	status = "okay";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	pinctrl-0 = <&dp0_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp0_connector_in>;
+};
+
+&mdss0_dp0_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&mdss0_dp1 {
+	pinctrl-0 = <&dp1_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp1_connector_in>;
+};
+
+&mdss0_dp1_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sa8775p/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp0 {
+	firmware-name = "qcom/sa8775p/cdsp0.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp1 {
+	firmware-name = "qcom/sa8775p/cdsp1.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+	firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+	firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+
+	status = "okay";
+};
+
+&sdhc {
+	vmmc-supply = <&vmmc_sdc>;
+	vqmmc-supply = <&vreg_sdc>;
+
+	pinctrl-0 = <&sdc_default>, <&sd_cd>;
+	pinctrl-1 = <&sdc_sleep>, <&sd_cd>;
+	pinctrl-names = "default", "sleep";
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+
+	status = "okay";
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32768>;
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_default_state: pcie0-default-state {
+		clkreq-pins {
+			pins = "gpio1";
+			function = "pcie0_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio2";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio0";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		clkreq-pins {
+			pins = "gpio3";
+			function = "pcie1_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio4";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio5";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	sd_cd: sd-cd-state {
+		pins = "gpio36";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&uart10 {
+	compatible = "qcom,geni-debug-uart";
+	pinctrl-0 = <&qup_uart10_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi
index eaa43f022a65..1369c3d43f86 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi
@@ -10,7 +10,7 @@
 	thermal-zones {
 		pmm8654au_0_thermal: pm8775-0-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmm8654au_0_temp_alarm>;
 
 			trips {
@@ -30,7 +30,7 @@
 
 		pmm8654au_1_thermal: pm8775-1-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmm8654au_1_temp_alarm>;
 
 			trips {
@@ -50,7 +50,7 @@
 
 		pmm8654au_2_thermal: pm8775-2-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmm8654au_2_temp_alarm>;
 
 			trips {
@@ -70,7 +70,7 @@
 
 		pmm8654au_3_thermal: pm8775-3-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmm8654au_3_temp_alarm>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
new file mode 100644
index 000000000000..c69aa2f41ce2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
@@ -0,0 +1,1061 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/ {
+	aliases {
+		i2c11 = &i2c11;
+		i2c18 = &i2c18;
+		serial0 = &uart10;
+		serial1 = &uart12;
+		serial2 = &uart17;
+		spi16 = &spi16;
+		ufshc1 = &ufs_mem_hc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vreg_12p0: vreg-12p0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_12P0";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vreg_5p0: vreg-5p0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_5P0";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&vreg_12p0>;
+	};
+
+	vreg_1p8: vreg-1p8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_1P8";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vreg_5p0>;
+	};
+
+	vreg_1p0: vreg-1p0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_1P0";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+
+		vin-supply = <&vreg_1p8>;
+	};
+
+	vreg_3p0: vreg-3p0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_3P0";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		vin-supply = <&vreg_12p0>;
+	};
+
+	vreg_conn_1p8: vreg_conn_1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_conn_1p8";
+		startup-delay-us = <4000>;
+		enable-active-high;
+		gpio = <&pmm8654au_1_gpios 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	vreg_conn_pa: vreg_conn_pa {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_conn_pa";
+		startup-delay-us = <4000>;
+		enable-active-high;
+		gpio = <&pmm8654au_1_gpios 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+
+		vddio-supply = <&vreg_conn_pa>;
+		vddaon-supply = <&vreg_l2c>;
+		vddpmu-supply = <&vreg_conn_1p8>;
+		vddrfa0p95-supply = <&vreg_l2c>;
+		vddrfa1p3-supply = <&vreg_l6e>;
+		vddrfa1p9-supply = <&vreg_s5a>;
+		vddpcie1p3-supply = <&vreg_l6e>;
+		vddpcie1p9-supply = <&vreg_s5a>;
+
+		bt-enable-gpios = <&pmm8654au_1_gpios 8 GPIO_ACTIVE_HIGH>;
+		wlan-enable-gpios = <&pmm8654au_1_gpios 7 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+
+	dp0-connector {
+		compatible = "dp-connector";
+		label = "eDP0";
+		type = "full-size";
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp0_out>;
+			};
+		};
+	};
+
+	dp1-connector {
+		compatible = "dp-connector";
+		label = "eDP1";
+		type = "full-size";
+
+		port {
+			dp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp1_out>;
+			};
+		};
+	};
+
+	dp-dsi0-connector {
+		compatible = "dp-connector";
+		label = "DSI0";
+		type = "full-size";
+
+		port {
+			dp_dsi0_connector_in: endpoint {
+				remote-endpoint = <&dsi2dp_bridge0_out>;
+			};
+		};
+	};
+
+	dp-dsi1-connector {
+		compatible = "dp-connector";
+		label = "DSI1";
+		type = "full-size";
+
+		port {
+			dp_dsi1_connector_in: endpoint {
+				remote-endpoint = <&dsi2dp_bridge1_out>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1816000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a: smps5 {
+			regulator-name = "vreg_s5a";
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1996000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9a: smps9 {
+			regulator-name = "vreg_s9a";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			/*
+			 * FIXME: This should have regulator-allow-set-load but
+			 * we're getting an over-current fault from the PMIC
+			 * when switching to LPM.
+			 */
+		};
+
+		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s4e: smps4 {
+			regulator-name = "vreg_s4e";
+			regulator-min-microvolt = <970000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7e: smps7 {
+			regulator-name = "vreg_s7e";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9e: smps9 {
+			regulator-name = "vreg_s9e";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <570000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6e: ldo6 {
+			regulator-name = "vreg_l6e";
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8e: ldo8 {
+			regulator-name = "vreg_l8e";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c18 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	io_expander: gpio@74 {
+		compatible = "ti,tca9539";
+		reg = <0x74>;
+		interrupts-extended = <&tlmm 98 IRQ_TYPE_EDGE_BOTH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&io_expander_intr_active>,
+			    <&io_expander_reset_active>;
+		pinctrl-names = "default";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			bridge@58 {
+				compatible = "analogix,anx7625";
+				reg = <0x58>;
+				interrupts-extended = <&io_expander 2 IRQ_TYPE_EDGE_FALLING>;
+				enable-gpios = <&io_expander 1 GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>;
+				vdd10-supply = <&vreg_1p0>;
+				vdd18-supply = <&vreg_1p8>;
+				vdd33-supply = <&vreg_3p0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsi2dp_bridge0_in: endpoint {
+							remote-endpoint = <&mdss0_dsi0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dsi2dp_bridge0_out: endpoint {
+							remote-endpoint = <&dp_dsi0_connector_in>;
+						};
+					};
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			bridge@58 {
+				compatible = "analogix,anx7625";
+				reg = <0x58>;
+				interrupts-extended = <&io_expander 10 IRQ_TYPE_EDGE_FALLING>;
+				enable-gpios = <&io_expander 9 GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&io_expander 8 GPIO_ACTIVE_HIGH>;
+				vdd10-supply = <&vreg_1p0>;
+				vdd18-supply = <&vreg_1p8>;
+				vdd33-supply = <&vreg_3p0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsi2dp_bridge1_in: endpoint {
+							remote-endpoint = <&mdss0_dsi1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dsi2dp_bridge1_out: endpoint {
+							remote-endpoint = <&dp_dsi1_connector_in>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+};
+
+&iris {
+	firmware-name = "qcom/vpu/vpu30_p4_s6.mbn";
+
+	status = "okay";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	pinctrl-0 = <&dp0_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	remote-endpoint = <&dp0_connector_in>;
+};
+
+&mdss0_dp0_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&mdss0_dp1 {
+	pinctrl-0 = <&dp1_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	remote-endpoint = <&dp1_connector_in>;
+};
+
+&mdss0_dp1_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&mdss0_dsi0 {
+	vdda-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&mdss0_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&dsi2dp_bridge0_in>;
+};
+
+&mdss0_dsi0_phy {
+	vdds-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&mdss0_dsi1 {
+	vdda-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&mdss0_dsi1_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&dsi2dp_bridge1_in>;
+};
+
+&mdss0_dsi1_phy {
+	vdds-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&pmm8654au_0_gpios {
+	gpio-line-names = "DS_EN",
+			  "POFF_COMPLETE",
+			  "UFS0_VER_ID",
+			  "FAST_POFF",
+			  "DBU1_PON_DONE",
+			  "AOSS_SLEEP",
+			  "CAM_DES0_EN",
+			  "CAM_DES1_EN",
+			  "CAM_DES2_EN",
+			  "CAM_DES3_EN",
+			  "UEFI",
+			  "ANALOG_PON_OPT";
+};
+
+&pmm8654au_0_pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmm8654au_1_gpios {
+	gpio-line-names = "PMIC_C_ID0",
+			  "PMIC_C_ID1",
+			  "UFS1_VER_ID",
+			  "IPA_PWR",
+			  "",
+			  "WLAN_DBU4_EN",
+			  "WLAN_EN",
+			  "BT_EN",
+			  "USB2_PWR_EN",
+			  "USB2_FAULT";
+
+	wlan_en_state: wlan-en-state {
+		pins = "gpio7";
+		function = "normal";
+		output-low;
+		bias-pull-down;
+	};
+
+	bt_en_state: bt-en-state {
+		pins = "gpio8";
+		function = "normal";
+		output-low;
+		bias-pull-down;
+	};
+
+	usb2_en_state: usb2-en-state {
+		pins = "gpio9";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+};
+
+&pmm8654au_2_gpios {
+	gpio-line-names = "PMIC_E_ID0",
+			  "PMIC_E_ID1",
+			  "USB0_PWR_EN",
+			  "USB0_FAULT",
+			  "SENSOR_IRQ_1",
+			  "SENSOR_IRQ_2",
+			  "SENSOR_RST",
+			  "SGMIIO0_RST",
+			  "SGMIIO1_RST",
+			  "USB1_PWR_ENABLE",
+			  "USB1_FAULT",
+			  "VMON_SPX8";
+
+	usb0_en_state: usb0-en-state {
+		pins = "gpio3";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+
+	usb1_en_state: usb1-en-state {
+		pins = "gpio10";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+};
+
+&pmm8654au_3_gpios {
+	gpio-line-names = "PMIC_G_ID0",
+			  "PMIC_G_ID1",
+			  "GNSS_RST",
+			  "GNSS_EN",
+			  "GNSS_BOOT_MODE";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&qup_spi16_default {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c18_default {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart12_cts {
+	bias-disable;
+};
+
+&qup_uart12_rts {
+	bias-pull-down;
+};
+
+&qup_uart12_tx {
+	bias-pull-up;
+};
+
+&qup_uart12_rx {
+	bias-pull-down;
+};
+
+&qup_uart17_cts {
+	bias-disable;
+};
+
+&qup_uart17_rts {
+	bias-pull-down;
+};
+
+&qup_uart17_tx {
+	bias-pull-up;
+};
+
+&qup_uart17_rx {
+	bias-pull-down;
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&serdes1 {
+	phy-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&spi16 {
+	status = "okay";
+};
+
+&tlmm {
+	dp0_hot_plug_det: dp0-hot-plug-det-state {
+		pins = "gpio101";
+		function = "edp0_hot";
+		bias-disable;
+	};
+
+	dp1_hot_plug_det: dp1-hot-plug-det-state {
+		pins = "gpio102";
+		function = "edp1_hot";
+		bias-disable;
+	};
+
+	io_expander_intr_active: io-expander-intr-active-state {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	io_expander_reset_active: io-expander-reset-active-state {
+		pins = "gpio97";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	pcie0_default_state: pcie0-default-state {
+		perst-pins {
+			pins = "gpio2";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio1";
+			function = "pcie0_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio0";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-pins {
+			pins = "gpio4";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio3";
+			function = "pcie1_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio5";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1101";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		qcom,calibration-variant = "QC_SA8775P_Ride";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sa8775p/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp0 {
+	firmware-name = "qcom/sa8775p/cdsp0.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp1 {
+	firmware-name = "qcom/sa8775p/cdsp1.mbn";
+	status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+	firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+	status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+	firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+	status = "okay";
+};
+
+&uart10 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&uart12 {
+	pinctrl-0 = <&qup_uart12_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart17 {
+	pinctrl-0 = <&qup_uart17_default>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+		firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_en_state>;
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_en_state>;
+	dr_mode = "host";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_en_state>;
+	dr_mode = "host";
+
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-88ea1512.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-88ea1512.dtsi
new file mode 100644
index 000000000000..9d6bbe1447a4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-88ea1512.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/*
+ * Ethernet card for Lemans based Ride boards.
+ * It supports 2x 1G - SGMII (Marvell 88EA1512-B2) phy for Main domain
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
+	};
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-handle = <&sgmii_phy0>;
+	phy-mode = "sgmii";
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sgmii_phy0: phy@8 {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0x8>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+
+		sgmii_phy1: phy@a {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0xa>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&ethernet1 {
+	phy-handle = <&sgmii_phy1>;
+	phy-mode = "sgmii";
+
+	snps,mtl-rx-config = <&mtl_rx_setup1>;
+	snps,mtl-tx-config = <&mtl_tx_setup1>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mtl_rx_setup1: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup1: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-aqr115c.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-aqr115c.dtsi
new file mode 100644
index 000000000000..2d2d9ee5f0d9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-aqr115c.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/*
+ * Ethernet card for Lemans based Ride r3 boards.
+ * It supports 2x 2.5G - HSGMII (Marvell hsgmii) phy for Main domain
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
+	};
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-handle = <&hsgmii_phy0>;
+	phy-mode = "2500base-x";
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hsgmii_phy0: phy@8 {
+			compatible = "ethernet-phy-id31c3.1c33";
+			reg = <0x8>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+
+		hsgmii_phy1: phy@0 {
+			compatible = "ethernet-phy-id31c3.1c33";
+			reg = <0x0>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&ethernet1 {
+	phy-handle = <&hsgmii_phy1>;
+	phy-mode = "2500base-x";
+
+	snps,mtl-rx-config = <&mtl_rx_setup1>;
+	snps,mtl-tx-config = <&mtl_tx_setup1>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mtl_rx_setup1: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup1: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
new file mode 100644
index 000000000000..cf685cb186ed
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -0,0 +1,8604 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
+#include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
+#include <dt-bindings/clock/qcom,sa8775p-videocc.h>
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&l2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&l2_1>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&l2_2>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+			l2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&l2_3>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+			l2_3: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd4>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&l2_4>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+			l2_4: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+				l3_1: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+
+			};
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd5>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&l2_5>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+			l2_5: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd6>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&l2_6>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+			l2_6: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd7>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&l2_7>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+			l2_7: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			gold_cpu_sleep_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			gold_rail_cpu_sleep_0: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <1061>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			cluster_sleep_gold: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			cluster_sleep_apss_rsc_pc: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x42000144>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1939200000 {
+			opp-hz = /bits/ 64 <1939200000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2265600000 {
+			opp-hz = /bits/ 64 <2265600000>;
+			opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+		opp-2457600000 {
+			opp-hz = /bits/ 64 <2457600000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+		opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1939200000 {
+			opp-hz = /bits/ 64 <1939200000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2265600000 {
+			opp-hz = /bits/ 64 <2265600000>;
+			opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+		opp-2457600000 {
+			opp-hz = /bits/ 64 <2457600000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+		opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>;
+		};
+	};
+
+	dummy-sink {
+		compatible = "arm,coresight-dummy-sink";
+
+		in-ports {
+			port {
+				eud_in: endpoint {
+					remote-endpoint =
+					<&swao_rep_out1>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sa8775p", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
+		};
+	};
+
+	aggre1_noc: interconnect-aggre1-noc {
+		compatible = "qcom,sa8775p-aggre1-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	aggre2_noc: interconnect-aggre2-noc {
+		compatible = "qcom,sa8775p-aggre2-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	clk_virt: interconnect-clk-virt {
+		compatible = "qcom,sa8775p-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	config_noc: interconnect-config-noc {
+		compatible = "qcom,sa8775p-config-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	dc_noc: interconnect-dc-noc {
+		compatible = "qcom,sa8775p-dc-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	gem_noc: interconnect-gem-noc {
+		compatible = "qcom,sa8775p-gem-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	gpdsp_anoc: interconnect-gpdsp-anoc {
+		compatible = "qcom,sa8775p-gpdsp-anoc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	lpass_ag_noc: interconnect-lpass-ag-noc {
+		compatible = "qcom,sa8775p-lpass-ag-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-mc-virt {
+		compatible = "qcom,sa8775p-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mmss_noc: interconnect-mmss-noc {
+		compatible = "qcom,sa8775p-mmss-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	nspa_noc: interconnect-nspa-noc {
+		compatible = "qcom,sa8775p-nspa-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	nspb_noc: interconnect-nspb-noc {
+		compatible = "qcom,sa8775p-nspb-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	pcie_anoc: interconnect-pcie-anoc {
+		compatible = "qcom,sa8775p-pcie-anoc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	system_noc: interconnect-system-noc {
+		compatible = "qcom,sa8775p-system-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	/* Will be updated by the bootloader. */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_0_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>,
+					     <&gold_rail_cpu_sleep_0>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_0_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>,
+					     <&gold_rail_cpu_sleep_0>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_0_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>,
+					     <&gold_rail_cpu_sleep_0>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_0_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>,
+					     <&gold_rail_cpu_sleep_0>;
+		};
+
+		cpu_pd4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_1_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>,
+					     <&gold_rail_cpu_sleep_0>;
+		};
+
+		cpu_pd5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_1_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>,
+					     <&gold_rail_cpu_sleep_0>;
+		};
+
+		cpu_pd6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_1_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>,
+					     <&gold_rail_cpu_sleep_0>;
+		};
+
+		cpu_pd7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_1_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>,
+					     <&gold_rail_cpu_sleep_0>;
+		};
+
+		cluster_0_pd: power-domain-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_gold>;
+			power-domains = <&system_pd>;
+		};
+
+		cluster_1_pd: power-domain-cluster1 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_gold>;
+			power-domains = <&system_pd>;
+		};
+
+		system_pd: power-domain-system {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_apss_rsc_pc>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sail_ss_mem: sail-ss@80000000 {
+			reg = <0x0 0x80000000 0x0 0x10000000>;
+			no-map;
+		};
+
+		hyp_mem: hyp@90000000 {
+			reg = <0x0 0x90000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_boot_mem: xbl-boot@90600000 {
+			reg = <0x0 0x90600000 0x0 0x200000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@90800000 {
+			reg = <0x0 0x90800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@90860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x90860000 0x0 0x20000>;
+			no-map;
+		};
+
+		uefi_log: uefi-log@908b0000 {
+			reg = <0x0 0x908b0000 0x0 0x10000>;
+			no-map;
+		};
+
+		ddr_training_checksum: ddr-training-checksum@908c0000 {
+			reg = <0x0 0x908c0000 0x0 0x1000>;
+			no-map;
+		};
+
+		reserved_mem: reserved@908f0000 {
+			reg = <0x0 0x908f0000 0x0 0xe000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss@908fe000 {
+			reg = <0x0 0x908fe000 0x0 0x2000>;
+			no-map;
+		};
+
+		smem_mem: smem@90900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x90900000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		tz_sail_mailbox_mem: tz-sail-mailbox@90c00000 {
+			reg = <0x0 0x90c00000 0x0 0x100000>;
+			no-map;
+		};
+
+		sail_mailbox_mem: sail-ss@90d00000 {
+			reg = <0x0 0x90d00000 0x0 0x100000>;
+			no-map;
+		};
+
+		sail_ota_mem: sail-ss@90e00000 {
+			reg = <0x0 0x90e00000 0x0 0x300000>;
+			no-map;
+		};
+
+		gunyah_md_mem: gunyah-md@91a80000 {
+			reg = <0x0 0x91a80000 0x0 0x80000>;
+			no-map;
+		};
+
+		aoss_backup_mem: aoss-backup@91b00000 {
+			reg = <0x0 0x91b00000 0x0 0x40000>;
+			no-map;
+		};
+
+		cpucp_backup_mem: cpucp-backup@91b40000 {
+			reg = <0x0 0x91b40000 0x0 0x40000>;
+			no-map;
+		};
+
+		tz_config_backup_mem: tz-config-backup@91b80000 {
+			reg = <0x0 0x91b80000 0x0 0x10000>;
+			no-map;
+		};
+
+		ddr_training_data_mem: ddr-training-data@91b90000 {
+			reg = <0x0 0x91b90000 0x0 0x10000>;
+			no-map;
+		};
+
+		cdt_data_backup_mem: cdt-data-backup@91ba0000 {
+			reg = <0x0 0x91ba0000 0x0 0x1000>;
+			no-map;
+		};
+
+		lpass_machine_learning_mem: lpass-machine-learning@93b00000 {
+			reg = <0x0 0x93b00000 0x0 0xf00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@94a00000 {
+			reg = <0x0 0x94a00000 0x0 0x800000>;
+			no-map;
+		};
+
+		pil_camera_mem: pil-camera@95200000 {
+			reg = <0x0 0x95200000 0x0 0x700000>;
+			no-map;
+		};
+
+		pil_adsp_mem: pil-adsp@95900000 {
+			reg = <0x0 0x95900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@97700000 {
+			reg = <0x0 0x97700000 0x0 0x80000>;
+			no-map;
+		};
+
+		q6_gdsp0_dtb_mem: q6-gdsp0-dtb@97780000 {
+			reg = <0x0 0x97780000 0x0 0x80000>;
+			no-map;
+		};
+
+		pil_gdsp0_mem: pil-gdsp0@97800000 {
+			reg = <0x0 0x97800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gdsp1_mem: pil-gdsp1@99600000 {
+			reg = <0x0 0x99600000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		q6_gdsp1_dtb_mem: q6-gdsp1-dtb@9b400000 {
+			reg = <0x0 0x9b400000 0x0 0x80000>;
+			no-map;
+		};
+
+		q6_cdsp0_dtb_mem: q6-cdsp0-dtb@9b480000 {
+			reg = <0x0 0x9b480000 0x0 0x80000>;
+			no-map;
+		};
+
+		pil_cdsp0_mem: pil-cdsp0@9b500000 {
+			reg = <0x0 0x9b500000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gpu_mem: pil-gpu@9d300000 {
+			reg = <0x0 0x9d300000 0x0 0x2000>;
+			no-map;
+		};
+
+		q6_cdsp1_dtb_mem: q6-cdsp1-dtb@9d380000 {
+			reg = <0x0 0x9d380000 0x0 0x80000>;
+			no-map;
+		};
+
+		pil_cdsp1_mem: pil-cdsp1@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cvp_mem: pil-cvp@9f200000 {
+			reg = <0x0 0x9f200000 0x0 0x700000>;
+			no-map;
+		};
+
+		pil_video_mem: pil-video@9f900000 {
+			reg = <0x0 0x9f900000 0x0 0x1000000>;
+			no-map;
+		};
+
+		firmware_mem: firmware-region@b0000000 {
+			reg = <0x0 0xb0000000 0x0 0x800000>;
+			no-map;
+		};
+
+		scmi_mem: scmi-region@d0000000 {
+			reg = <0x0 0xd0000000 0x0 0x40000>;
+			no-map;
+		};
+
+		firmware_logs_mem: firmware-logs@d0040000 {
+			reg = <0x0 0xd0040000 0x0 0x10000>;
+			no-map;
+		};
+
+		firmware_audio_mem: firmware-audio@d0050000 {
+			reg = <0x0 0xd0050000 0x0 0x4000>;
+			no-map;
+		};
+
+		firmware_reserved_mem: firmware-reserved@d0054000 {
+			reg = <0x0 0xd0054000 0x0 0x9c000>;
+			no-map;
+		};
+
+		firmware_quantum_test_mem: firmware-quantum-test@d00f0000 {
+			reg = <0x0 0xd00f0000 0x0 0x10000>;
+			no-map;
+		};
+
+		tags_mem: tags@d0100000 {
+			reg = <0x0 0xd0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@d1300000 {
+			reg = <0x0 0xd1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		deepsleep_backup_mem: deepsleep-backup@d1800000 {
+			reg = <0x0 0xd1800000 0x0 0x100000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@d1900000 {
+			reg = <0x0 0xd1900000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@db100000 {
+			reg = <0x0 0xdb100000 0x0 0x100000>;
+			no-map;
+		};
+
+		cpucp_fw_mem: cpucp-fw@db200000 {
+			reg = <0x0 0xdb200000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp0 {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp0_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp0_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp1 {
+		compatible = "qcom,smp2p";
+		qcom,smem = <617>, <616>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_NSP1 IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <12>;
+
+		smp2p_cdsp1_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp1_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-gpdsp0 {
+		compatible = "qcom,smp2p";
+		qcom,smem = <617>, <616>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_GPDSP0 IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <17>;
+
+		smp2p_gpdsp0_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_gpdsp0_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-gpdsp1 {
+		compatible = "qcom,smp2p";
+		qcom,smem = <617>, <616>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_GPDSP1 IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <18>;
+
+		smp2p_gpdsp1_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_gpdsp1_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sa8775p-gcc";
+			reg = <0x0 0x00100000 0x0 0xc7018>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&usb_0_qmpphy>,
+				 <&usb_1_qmpphy>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SA8775P_CX>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sa8775p-ipcc", "qcom,ipcc";
+			reg = <0x0 0x00408000 0x0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000  {
+			compatible = "qcom,sa8775p-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x00800000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			iommus = <&apps_smmu 0x5b6 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x5a3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			i2c14: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x880000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c14_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi14: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x880000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi14_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart14: serial@880000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00880000 0x0 0x4000>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart14_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x884000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c15_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi15: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x884000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi15_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart15: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00884000 0x0 0x4000>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart15_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x888000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c16_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi16: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi16_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart16: serial@888000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart16_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c17: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x88c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c17_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi17: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x88c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi17_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart17: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x0088c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart17_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c18: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00890000 0x0 0x4000>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c18_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi18: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x890000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi18_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart18: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00890000 0x0 0x4000>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart18_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x894000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c19_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi19: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x894000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi19_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart19: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00894000 0x0 0x4000>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart19_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c20: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x898000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c20_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi20: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x898000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi20_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart20: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00898000 0x0 0x4000>;
+				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart20_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+		};
+
+		gpi_dma0: dma-controller@900000  {
+			compatible = "qcom,sa8775p-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x00900000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			iommus = <&apps_smmu 0x416 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x9c0000 0x0 0x6000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x403 0x0>;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c0_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi0_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				     <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart0: serial@980000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c1_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi1_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart1: serial@984000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart1_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c2_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart2: serial@988000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart2_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c3_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi3_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart3: serial@98c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart3_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c4_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi4_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart4: serial@990000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart4_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c5_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi5_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart5: serial@994000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart5_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000  {
+			compatible = "qcom,sa8775p-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x00a00000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x456 0x0>;
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x443 0x0>;
+			status = "disabled";
+
+			i2c7: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c7_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi7: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi7_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart7: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a80000 0x0 0x4000>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-0 = <&qup_uart7_default>;
+				pinctrl-names = "default";
+				interconnect-names = "qup-core", "qup-config";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				power-domains = <&rpmhpd SA8775P_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c8_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi8: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi8_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart8: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-0 = <&qup_uart8_default>;
+				pinctrl-names = "default";
+				interconnect-names = "qup-core", "qup-config";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				power-domains = <&rpmhpd SA8775P_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c9_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi9: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi9_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart9: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart9_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c10_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi10: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi10_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart10: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-0 = <&qup_uart10_default>;
+				pinctrl-names = "default";
+				interconnect-names = "qup-core", "qup-config";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0
+						 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0
+						 &config_noc SLAVE_QUP_1 0>;
+				power-domains = <&rpmhpd SA8775P_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c11_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi11: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi11_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart11: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-0 = <&qup_uart11_default>;
+				pinctrl-names = "default";
+				interconnect-names = "qup-core", "qup-config";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				power-domains = <&rpmhpd SA8775P_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c12_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi12: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi12_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart12: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart12_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c13_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+
+			};
+		};
+
+		gpi_dma3: dma-controller@b00000  {
+			compatible = "qcom,sa8775p-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x00b00000 0x0 0x58000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x056 0x0>;
+			dma-channels = <4>;
+			dma-channel-mask = <0xf>;
+			status = "disabled";
+		};
+
+		qupv3_id_3: geniqup@bc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xbc0000 0x0 0x6000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x43 0x0>;
+			status = "disabled";
+
+			i2c21: i2c@b80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c21_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+					   <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						&config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
+					   <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
+						&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+							 "qup-config",
+							 "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma3 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma3 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi21: spi@b80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi21_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+					   <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						&config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
+					   <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
+						&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+							 "qup-config",
+							 "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				dmas = <&gpi_dma3 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma3 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart21: serial@b80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00b80000 0x0 0x4000>;
+				interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				interconnect-names = "qup-core", "qup-config";
+				pinctrl-0 = <&qup_uart21_default>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>;
+				power-domains = <&rpmhpd SA8775P_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+		};
+
+		rng: rng@10d2000 {
+			compatible = "qcom,sa8775p-trng", "qcom,trng";
+			reg = <0 0x010d2000 0 0x1000>;
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+			iommus = <&apps_smmu 0x100 0x0>;
+			dma-coherent;
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+			qcom,ice = <&ice>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sa8775p-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe10>;
+			/*
+			 * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It
+			 * enables the CXO clock to eDP *and* UFS PHY.
+			 */
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_EDP_REF_CLKREF_EN>;
+			clock-names = "ref", "ref_aux", "qref";
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sa8775p-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x01d88000 0x0 0x18000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x480 0x00>,
+				 <&apps_smmu 0x481 0x00>;
+		};
+
+		ctcu@4001000 {
+			compatible = "qcom,sa8775p-ctcu";
+			reg = <0x0 0x04001000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ctcu_in0: endpoint {
+						remote-endpoint = <&etr0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ctcu_in1: endpoint {
+						remote-endpoint = <&etr1_out>;
+					};
+				};
+			};
+		};
+
+		stm: stm@4002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x0 0x4002000 0x0 0x1000>,
+				  <0x0 0x16280000 0x0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint =
+						<&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@4003000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x4003000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					qdss_tpdm0_out: endpoint {
+						remote-endpoint =
+						<&qdss_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpda@4004000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x4004000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					qdss_tpda_out: endpoint {
+						remote-endpoint =
+						<&funnel0_in6>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					qdss_tpda_in0: endpoint {
+						remote-endpoint =
+						<&qdss_tpdm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					qdss_tpda_in1: endpoint {
+						remote-endpoint =
+						<&qdss_tpdm1_out>;
+					};
+				};
+			};
+		};
+
+		tpdm@400f000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x400f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					qdss_tpdm1_out: endpoint {
+						remote-endpoint =
+						<&qdss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@4041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x4041000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint =
+						<&qdss_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					funnel0_in6: endpoint {
+						remote-endpoint =
+						<&qdss_tpda_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint =
+						<&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@4042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x4042000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint =
+						<&qdss_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel1_in4: endpoint {
+						remote-endpoint =
+						<&apss_funnel1_out>;
+					};
+				};
+			};
+		};
+
+		funnel@4045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x4045000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					qdss_funnel_out: endpoint {
+						remote-endpoint =
+						<&aoss_funnel_in7>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					qdss_funnel_in0: endpoint {
+						remote-endpoint =
+						<&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					qdss_funnel_in1: endpoint {
+						remote-endpoint =
+						<&funnel1_out>;
+					};
+				};
+			};
+		};
+
+		replicator@4046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x04046000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					qdss_rep_in: endpoint {
+						remote-endpoint = <&swao_rep_out0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					qdss_rep_out0: endpoint {
+						remote-endpoint = <&etr_rep_in>;
+					};
+				};
+			};
+		};
+
+		tmc_etr: tmc@4048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x04048000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			iommus = <&apps_smmu 0x04c0 0x00>;
+
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr0_in: endpoint {
+						remote-endpoint = <&etr_rep_out0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etr0_out: endpoint {
+						remote-endpoint = <&ctcu_in0>;
+					};
+				};
+			};
+		};
+
+		replicator@404e000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x0404e000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_rep_in: endpoint {
+						remote-endpoint = <&qdss_rep_out0>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					etr_rep_out0: endpoint {
+						remote-endpoint = <&etr0_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					etr_rep_out1: endpoint {
+						remote-endpoint = <&etr1_in>;
+					};
+				};
+			};
+		};
+
+		tmc_etr1: tmc@404f000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x0404f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			iommus = <&apps_smmu 0x04a0 0x40>;
+
+			arm,scatter-gather;
+			arm,buffer-size = <0x400000>;
+
+			in-ports {
+				port {
+					etr1_in: endpoint {
+						remote-endpoint = <&etr_rep_out1>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etr1_out: endpoint {
+						remote-endpoint = <&ctcu_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@4b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x4b04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					aoss_funnel_out: endpoint {
+						remote-endpoint =
+						<&etf0_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					aoss_funnel_in6: endpoint {
+						remote-endpoint =
+						<&aoss_tpda_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					aoss_funnel_in7: endpoint {
+						remote-endpoint =
+						<&qdss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		tmc_etf: tmc@4b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x4b05000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf0_out: endpoint {
+						remote-endpoint =
+						<&swao_rep_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf0_in: endpoint {
+						remote-endpoint =
+						<&aoss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		replicator@4b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x4b06000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					swao_rep_out0: endpoint {
+						remote-endpoint = <&qdss_rep_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					swao_rep_out1: endpoint {
+						remote-endpoint =
+						<&eud_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_rep_in: endpoint {
+						remote-endpoint =
+						<&etf0_out>;
+					};
+				};
+			};
+		};
+
+		tpda@4b08000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x4b08000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					aoss_tpda_out: endpoint {
+						remote-endpoint =
+						<&aoss_funnel_in6>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					aoss_tpda_in0: endpoint {
+						remote-endpoint =
+						<&aoss_tpdm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					aoss_tpda_in1: endpoint {
+						remote-endpoint =
+						<&aoss_tpdm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					aoss_tpda_in2: endpoint {
+						remote-endpoint =
+						<&aoss_tpdm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					aoss_tpda_in3: endpoint {
+						remote-endpoint =
+						<&aoss_tpdm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					aoss_tpda_in4: endpoint {
+						remote-endpoint =
+						<&aoss_tpdm4_out>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b09000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x4b09000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm0_out: endpoint {
+						remote-endpoint =
+						<&aoss_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0a000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x4b0a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm1_out: endpoint {
+						remote-endpoint =
+						<&aoss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0b000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x4b0b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm2_out: endpoint {
+						remote-endpoint =
+						<&aoss_tpda_in2>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x4b0c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm3_out: endpoint {
+						remote-endpoint =
+						<&aoss_tpda_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0d000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x4b0d000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm4_out: endpoint {
+						remote-endpoint =
+						<&aoss_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		aoss_cti: cti@4b13000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x4b13000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@6040000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6040000 0x0 0x1000>;
+			cpu = <&cpu0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in0>;
+					};
+				};
+			};
+		};
+
+		etm@6140000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6140000 0x0 0x1000>;
+			cpu = <&cpu1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in1>;
+					};
+				};
+			};
+		};
+
+		etm@6240000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6240000 0x0 0x1000>;
+			cpu = <&cpu2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in2>;
+					};
+				};
+			};
+		};
+
+		etm@6340000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6340000 0x0 0x1000>;
+			cpu = <&cpu3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in3>;
+					};
+				};
+			};
+		};
+
+		etm@6440000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6440000 0x0 0x1000>;
+			cpu = <&cpu4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in4>;
+					};
+				};
+			};
+		};
+
+		etm@6540000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6540000 0x0 0x1000>;
+			cpu = <&cpu5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in5>;
+					};
+				};
+			};
+		};
+
+		etm@6640000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6640000 0x0 0x1000>;
+			cpu = <&cpu6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in6>;
+					};
+				};
+			};
+		};
+
+		etm@6740000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6740000 0x0 0x1000>;
+			cpu = <&cpu7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6800000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x6800000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel0_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel1_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel0_in0: endpoint {
+						remote-endpoint =
+						<&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel0_in1: endpoint {
+						remote-endpoint =
+						<&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel0_in2: endpoint {
+						remote-endpoint =
+						<&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel0_in3: endpoint {
+						remote-endpoint =
+						<&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel0_in4: endpoint {
+						remote-endpoint =
+						<&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel0_in5: endpoint {
+						remote-endpoint =
+						<&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel0_in6: endpoint {
+						remote-endpoint =
+						<&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel0_in7: endpoint {
+						remote-endpoint =
+						<&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x6810000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel1_out: endpoint {
+						remote-endpoint =
+						<&funnel1_in4>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel1_in0: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel1_in3: endpoint {
+						remote-endpoint =
+						<&apss_tpda_out>;
+					};
+				};
+			};
+		};
+
+		tpdm@6860000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x6860000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm3_out: endpoint {
+						remote-endpoint =
+						<&apss_tpda_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@6861000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x6861000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm4_out: endpoint {
+						remote-endpoint =
+						<&apss_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		tpda@6863000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x6863000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_tpda_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel1_in3>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_tpda_in0: endpoint {
+						remote-endpoint =
+						<&apss_tpdm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_tpda_in1: endpoint {
+						remote-endpoint =
+						<&apss_tpdm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_tpda_in2: endpoint {
+						remote-endpoint =
+						<&apss_tpdm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_tpda_in3: endpoint {
+						remote-endpoint =
+						<&apss_tpdm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_tpda_in4: endpoint {
+						remote-endpoint =
+						<&apss_tpdm4_out>;
+					};
+				};
+			};
+		};
+
+		tpdm@68a0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x68a0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm0_out: endpoint {
+						remote-endpoint =
+						<&apss_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@68b0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x68b0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm1_out: endpoint {
+						remote-endpoint =
+						<&apss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		tpdm@68c0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x68c0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm2_out: endpoint {
+						remote-endpoint =
+						<&apss_tpda_in2>;
+					};
+				};
+			};
+		};
+
+		sdhc: mmc@87c4000 {
+			compatible = "qcom,sa8775p-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x087c4000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>;
+			clock-names = "iface",
+				      "core";
+
+			interconnects = <&aggre1_noc MASTER_SDC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDC1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			iommus = <&apps_smmu 0x0 0x0>;
+			dma-coherent;
+
+			operating-points-v2 = <&sdhc_opp_table>;
+			power-domains = <&rpmhpd SA8775P_CX>;
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			status = "disabled";
+
+			sdhc_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1800000 400000>;
+					opp-avg-kBps = <100000 0>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <5400000 1600000>;
+					opp-avg-kBps = <390000 0>;
+				};
+			};
+		};
+
+		usb_0_hsphy: phy@88e4000 {
+			compatible = "qcom,sa8775p-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e4000 0 0x120>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_0_qmpphy: phy@88e8000 {
+			compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
+			reg = <0 0x088e8000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_CLKREF_EN>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_prim_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_0: usb@a600000 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a600000 0 0xfc100>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			iommus = <&apps_smmu 0x080 0x0>;
+			phys = <&usb_0_hsphy>, <&usb_0_qmpphy>;
+			phy-names = "usb2-phy", "usb3-phy";
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+
+			status = "disabled";
+		};
+
+		usb_1_hsphy: phy@88e6000 {
+			compatible = "qcom,sa8775p-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e6000 0 0x120>;
+			clocks = <&gcc GCC_USB_CLKREF_EN>;
+			clock-names = "ref";
+			resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_1_qmpphy: phy@88ea000 {
+			compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
+			reg = <0 0x088ea000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_CLKREF_EN>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_sec_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a800000 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a800000 0 0xfc100>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			iommus = <&apps_smmu 0x0a0 0x0>;
+			phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
+			phy-names = "usb2-phy", "usb3-phy";
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy: phy@88e7000 {
+			compatible = "qcom,sa8775p-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e7000 0 0x120>;
+			clocks = <&gcc GCC_USB_CLKREF_EN>;
+			clock-names = "ref";
+			resets = <&gcc GCC_USB3_PHY_TERT_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2: usb@a400000 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a400000 0 0xfc100>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_SLEEP_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
+
+			power-domains = <&gcc USB20_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB20_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			iommus = <&apps_smmu 0x020 0x0>;
+			phys = <&usb_2_hsphy>;
+			phy-names = "usb2-phy";
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sa8775p-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sa8775p-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sa8775p-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+				      "gcc_gpu_snoc_dvm_gfx_clk",
+				      "gpu_cc_ahb_clk",
+				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
+				      "gpu_cc_cx_gmu_clk",
+				      "gpu_cc_hub_cx_int_clk",
+				      "gpu_cc_hub_aon_clk";
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serdes0: phy@8901000 {
+			compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+			reg = <0x0 0x08901000 0x0 0xe10>;
+			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+			clock-names = "sgmi_ref";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		serdes1: phy@8902000 {
+			compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+			reg = <0x0 0x08902000 0x0 0xe10>;
+			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+			clock-names = "sgmi_ref";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pmu@9091000 {
+			compatible = "qcom,sa8775p-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0x0 0x9091000 0x0 0x1000>;
+			interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <762000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <1720000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <2601000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <6515000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <7984000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <10437000>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <12195000>;
+				};
+			};
+		};
+
+		pmu@90b5400 {
+			compatible = "qcom,sa8775p-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x90b5400 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <14236000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <16265000>;
+				};
+			};
+
+		};
+
+		pmu@90b6400 {
+			compatible = "qcom,sa8775p-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x90b6400 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+		};
+
+		llcc: system-cache-controller@9200000 {
+			compatible = "qcom,sa8775p-llcc";
+			reg = <0x0 0x09200000 0x0 0x80000>,
+			      <0x0 0x09300000 0x0 0x80000>,
+			      <0x0 0x09400000 0x0 0x80000>,
+			      <0x0 0x09500000 0x0 0x80000>,
+			      <0x0 0x09600000 0x0 0x80000>,
+			      <0x0 0x09700000 0x0 0x80000>,
+			      <0x0 0x09a00000 0x0 0x80000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc4_base",
+				    "llcc5_base",
+				    "llcc_broadcast_base";
+			interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		iris: video-codec@aa00000 {
+			compatible = "qcom,sa8775p-iris", "qcom,sm8550-iris";
+
+			reg = <0x0 0x0aa00000 0x0 0xf0000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+					<&videocc VIDEO_CC_MVS0_GDSC>,
+					<&rpmhpd SA8775P_MX>,
+					<&rpmhpd SA8775P_MMCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "mxc",
+					     "mmcx";
+			operating-points-v2 = <&iris_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg",
+					     "video-mem";
+
+			memory-region = <&pil_video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+			reset-names = "bus";
+
+			iommus = <&apps_smmu 0x0880 0x0400>,
+				 <&apps_smmu 0x0887 0x0400>;
+			dma-coherent;
+
+			status = "disabled";
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-366000000 {
+					opp-hz = /bits/ 64 <366000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>,
+							<&rpmhpd_opp_nom>;
+				};
+
+				opp-533000000 {
+					opp-hz = /bits/ 64 <533000000>;
+					required-opps = <&rpmhpd_opp_turbo>,
+							<&rpmhpd_opp_turbo>;
+				};
+
+				opp-560000000 {
+					opp-hz = /bits/ 64 <560000000>;
+					required-opps = <&rpmhpd_opp_turbo_l1>,
+							<&rpmhpd_opp_turbo_l1>;
+				};
+			};
+		};
+
+		videocc: clock-controller@abf0000 {
+			compatible = "qcom,sa8775p-videocc";
+			reg = <0x0 0x0abf0000 0x0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SA8775P_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		cci0: cci@ac13000 {
+			compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac13000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+			pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac14000 {
+			compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac14000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+			pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci2: cci@ac15000 {
+			compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac15000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_2_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+			pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci2_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci2_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci3: cci@ac16000 {
+			compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac16000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_3_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci3_0_default &cci3_1_default>;
+			pinctrl-1 = <&cci3_0_sleep &cci3_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci3_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci3_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: isp@ac78000 {
+			compatible = "qcom,sa8775p-camss";
+
+			reg = <0x0 0xac78000 0x0 0x1000>,
+			      <0x0 0xac7a000 0x0 0x0f00>,
+			      <0x0 0xac7c000 0x0 0x0f00>,
+			      <0x0 0xac84000 0x0 0x0f00>,
+			      <0x0 0xac88000 0x0 0x0f00>,
+			      <0x0 0xac8c000 0x0 0x0f00>,
+			      <0x0 0xac90000 0x0 0x0f00>,
+			      <0x0 0xac94000 0x0 0x0f00>,
+			      <0x0 0xac9c000 0x0 0x2000>,
+			      <0x0 0xac9e000 0x0 0x2000>,
+			      <0x0 0xaca0000 0x0 0x2000>,
+			      <0x0 0xaca2000 0x0 0x2000>,
+			      <0x0 0xacac000 0x0 0x0400>,
+			      <0x0 0xacad000 0x0 0x0400>,
+			      <0x0 0xacae000 0x0 0x0400>,
+			      <0x0 0xac4d000 0x0 0xd000>,
+			      <0x0 0xac5a000 0x0 0xd000>,
+			      <0x0 0xac85000 0x0 0x0d00>,
+			      <0x0 0xac89000 0x0 0x0d00>,
+			      <0x0 0xac8d000 0x0 0x0d00>,
+			      <0x0 0xac91000 0x0 0x0d00>,
+			      <0x0 0xac95000 0x0 0x0d00>;
+			reg-names = "csid_wrapper",
+				    "csid0",
+				    "csid1",
+				    "csid_lite0",
+				    "csid_lite1",
+				    "csid_lite2",
+				    "csid_lite3",
+				    "csid_lite4",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "csiphy3",
+				    "tpg0",
+				    "tpg1",
+				    "tpg2",
+				    "vfe0",
+				    "vfe1",
+				    "vfe_lite0",
+				    "vfe_lite1",
+				    "vfe_lite2",
+				    "vfe_lite3",
+				    "vfe_lite4";
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CORE_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+				 <&camcc CAM_CC_CSID_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>,
+				 <&camcc CAM_CC_ICP_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+			clock-names = "camnoc_axi",
+				      "core_ahb",
+				      "cpas_ahb",
+				      "cpas_fast_ahb_clk",
+				      "cpas_vfe_lite",
+				      "cpas_vfe0",
+				      "cpas_vfe1",
+				      "csid",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "csiphy_rx",
+				      "gcc_axi_hf",
+				      "gcc_axi_sf",
+				      "icp_ahb",
+				      "vfe0",
+				      "vfe0_fast_ahb",
+				      "vfe1",
+				      "vfe1_fast_ahb",
+				      "vfe_lite",
+				      "vfe_lite_ahb",
+				      "vfe_lite_cphy_rx",
+				      "vfe_lite_csid";
+
+			interrupts = <GIC_SPI 565 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 564 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 545 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 546 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 547 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid_lite0",
+					  "csid_lite1",
+					  "csid_lite2",
+					  "csid_lite3",
+					  "csid_lite4",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csiphy3",
+					  "tpg0",
+					  "tpg1",
+					  "tpg2",
+					  "vfe0",
+					  "vfe1",
+					  "vfe_lite0",
+					  "vfe_lite1",
+					  "vfe_lite2",
+					  "vfe_lite3",
+					  "vfe_lite4";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ahb",
+					     "hf_0";
+
+			iommus = <&apps_smmu 0x3400 0x20>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+			};
+		};
+
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,sa8775p-camcc";
+			reg = <0x0 0x0ade0000 0x0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SA8775P_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss0: display-subsystem@ae00000 {
+			compatible = "qcom,sa8775p-mdss";
+			reg = <0x0 0x0ae00000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			/* same path used twice */
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem",
+					     "cpu-cfg";
+
+			resets = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_GDSC>;
+
+			clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x1000 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss0_mdp: display-controller@ae01000 {
+				compatible = "qcom,sa8775p-dpu";
+				reg = <0x0 0x0ae01000 0x0 0x8f000>,
+				      <0x0 0x0aeb0000 0x0 0x3000>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdss0_mdp_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss0_dp0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf4_out: endpoint {
+							remote-endpoint = <&mdss0_dp1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss0_dsi0_in>;
+						};
+					};
+
+					port@3 {
+						reg = <3>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss0_dsi1_in>;
+						};
+					};
+				};
+
+				mdss0_mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+
+					opp-575000000 {
+						opp-hz = /bits/ 64 <575000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
+
+					opp-650000000 {
+						opp-hz = /bits/ 64 <650000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+
+			mdss0_dsi0: dsi@ae94000 {
+				compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <4>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>;
+				phys = <&mdss0_dsi0_phy>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dsi0_out: endpoint{ };
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss0_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,sa8775p-dsi-phy-5nm";
+				reg = <0x0 0x0ae94400 0x0 0x200>,
+				      <0x0 0x0ae94600 0x0 0x280>,
+				      <0x0 0x0ae94900 0x0 0x27c>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss0_dsi1: dsi@ae96000 {
+				compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae96000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <5>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>;
+				phys = <&mdss0_dsi1_phy>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dsi1_out: endpoint { };
+					};
+				};
+			};
+
+			mdss0_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,sa8775p-dsi-phy-5nm";
+				reg = <0x0 0x0ae96400 0x0 0x200>,
+				      <0x0 0x0ae96600 0x0 0x280>,
+				      <0x0 0x0ae96900 0x0 0x27c>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss0_dp0_phy: phy@aec2a00 {
+				compatible = "qcom,sa8775p-edp-phy";
+
+				reg = <0x0 0x0aec2a00 0x0 0x200>,
+				      <0x0 0x0aec2200 0x0 0xd0>,
+				      <0x0 0x0aec2600 0x0 0xd0>,
+				      <0x0 0x0aec2000 0x0 0x1c8>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>;
+				clock-names = "aux",
+					      "cfg_ahb";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss0_dp1_phy: phy@aec5a00 {
+				compatible = "qcom,sa8775p-edp-phy";
+
+				reg = <0x0 0x0aec5a00 0x0 0x200>,
+				      <0x0 0x0aec5200 0x0 0xd0>,
+				      <0x0 0x0aec5600 0x0 0xd0>,
+				      <0x0 0x0aec5000 0x0 0x1c8>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>;
+				clock-names = "aux",
+					      "cfg_ahb";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss0_dp0: displayport-controller@af54000 {
+				compatible = "qcom,sa8775p-dp";
+
+				reg = <0x0 0x0af54000 0x0 0x104>,
+				      <0x0 0x0af54200 0x0 0x0c0>,
+				      <0x0 0x0af55000 0x0 0x770>,
+				      <0x0 0x0af56000 0x0 0x09c>,
+				      <0x0 0x0af57000 0x0 0x09c>,
+				      <0x0 0x0af58000 0x0 0x09c>,
+				      <0x0 0x0af59000 0x0 0x09c>,
+				      <0x0 0x0af5a000 0x0 0x23c>,
+				      <0x0 0x0af5b000 0x0 0x23c>;
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <12>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel",
+					      "stream_2_pixel",
+					      "stream_3_pixel";
+				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp0_phy 0>,
+							 <&mdss0_dp0_phy 1>,
+							 <&mdss0_dp0_phy 1>,
+							 <&mdss0_dp0_phy 1>,
+							 <&mdss0_dp0_phy 1>;
+				phys = <&mdss0_dp0_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp0_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp1: displayport-controller@af5c000 {
+				compatible = "qcom,sa8775p-dp";
+
+				reg = <0x0 0x0af5c000 0x0 0x104>,
+				      <0x0 0x0af5c200 0x0 0x0c0>,
+				      <0x0 0x0af5d000 0x0 0x770>,
+				      <0x0 0x0af5e000 0x0 0x09c>,
+				      <0x0 0x0af5f000 0x0 0x09c>,
+				      <0x0 0x0af60000 0x0 0x09c>,
+				      <0x0 0x0af61000 0x0 0x09c>,
+				      <0x0 0x0af62000 0x0 0x23c>,
+				      <0x0 0x0af63000 0x0 0x23c>;
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <13>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel";
+				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp1_phy 0>,
+							 <&mdss0_dp1_phy 1>,
+							 <&mdss0_dp1_phy 1>;
+				phys = <&mdss0_dp1_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp1_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp1_in: endpoint {
+							remote-endpoint = <&dpu_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp1_out: endpoint { };
+					};
+				};
+
+				dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		dispcc0: clock-controller@af00000 {
+			compatible = "qcom,sa8775p-dispcc0";
+			reg = <0x0 0x0af00000 0x0 0x20000>;
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <&mdss0_dp0_phy 0>, <&mdss0_dp0_phy 1>,
+				 <&mdss0_dp1_phy 0>, <&mdss0_dp1_phy 1>,
+				 <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>;
+			power-domains = <&rpmhpd SA8775P_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sa8775p-pdc", "qcom,pdc";
+			reg = <0x0 0x0b220000 0x0 0x30000>,
+			      <0x0 0x17c000f0 0x0 0x64>;
+			qcom,pdc-ranges = <0 480 40>,
+					  <40 140 14>,
+					  <54 263 1>,
+					  <55 306 4>,
+					  <59 312 3>,
+					  <62 374 2>,
+					  <64 434 2>,
+					  <66 438 2>,
+					  <70 520 1>,
+					  <73 523 1>,
+					  <118 568 6>,
+					  <124 609 3>,
+					  <159 638 1>,
+					  <160 720 3>,
+					  <169 728 30>,
+					  <199 416 2>,
+					  <201 449 1>,
+					  <202 89 1>,
+					  <203 451 1>,
+					  <204 462 1>,
+					  <205 264 1>,
+					  <206 579 1>,
+					  <207 653 1>,
+					  <208 656 1>,
+					  <209 659 1>,
+					  <210 122 1>,
+					  <211 699 1>,
+					  <212 705 1>,
+					  <213 450 1>,
+					  <214 643 2>,
+					  <216 646 5>,
+					  <221 390 5>,
+					  <226 700 2>,
+					  <228 440 1>,
+					  <229 663 1>,
+					  <230 524 2>,
+					  <232 612 3>,
+					  <235 723 5>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens2: thermal-sensor@c251000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c251000 0x0 0x1ff>,
+			      <0x0 0x0c224000 0x0 0x8>;
+			interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <13>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens3: thermal-sensor@c252000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c252000 0x0 0x1ff>,
+			      <0x0 0x0c225000 0x0 0x8>;
+			interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <13>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c263000 0x0 0x1ff>,
+			      <0x0 0x0c222000 0x0 0x8>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <12>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c265000 0x0 0x1ff>,
+			      <0x0 0x0c223000 0x0 0x8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <12>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+					       IPCC_MPROC_SIGNAL_GLINK_QMP
+					       IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f000000 {
+			compatible = "qcom,sa8775p-tlmm";
+			reg = <0x0 0x0f000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 149>;
+			wakeup-parent = <&pdc>;
+
+			dp0_hot_plug_det: dp0-hot-plug-det-state {
+				pins = "gpio101";
+				function = "edp0_hot";
+				bias-disable;
+			};
+
+			dp1_hot_plug_det: dp1-hot-plug-det-state {
+				pins = "gpio102";
+				function = "edp1_hot";
+				bias-disable;
+			};
+
+			hs0_mi2s_active: hs0-mi2s-active-state {
+				pins = "gpio114", "gpio115", "gpio116", "gpio117";
+				function = "hs0_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			hs2_mi2s_active: hs2-mi2s-active-state {
+				pins = "gpio122", "gpio123", "gpio124", "gpio125";
+				function = "hs2_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			cci0_0_default: cci0-0-default-state {
+				pins = "gpio60", "gpio61";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci0_0_sleep: cci0-0-sleep-state {
+				pins = "gpio60", "gpio61";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci0_1_default: cci0-1-default-state {
+				pins = "gpio52", "gpio53";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci0_1_sleep: cci0-1-sleep-state {
+				pins = "gpio52", "gpio53";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_0_default: cci1-0-default-state {
+				pins = "gpio62", "gpio63";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci1_0_sleep: cci1-0-sleep-state {
+				pins = "gpio62", "gpio63";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_1_default: cci1-1-default-state {
+				pins = "gpio54", "gpio55";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci1_1_sleep: cci1-1-sleep-state {
+				pins = "gpio54", "gpio55";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_0_default: cci2-0-default-state {
+				pins = "gpio64", "gpio65";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci2_0_sleep: cci2-0-sleep-state {
+				pins = "gpio64", "gpio65";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_1_default: cci2-1-default-state {
+				pins = "gpio56", "gpio57";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci2_1_sleep: cci2-1-sleep-state {
+				pins = "gpio56", "gpio57";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_0_default: cci3-0-default-state {
+				pins = "gpio66", "gpio67";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci3_0_sleep: cci3-0-sleep-state {
+				pins = "gpio66", "gpio67";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_1_default: cci3-1-default-state {
+				pins = "gpio58", "gpio59";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci3_1_sleep: cci3-1-sleep-state {
+				pins = "gpio58", "gpio59";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			qup_i2c0_default: qup-i2c0-state {
+				pins = "gpio20", "gpio21";
+				function = "qup0_se0";
+			};
+
+			qup_i2c1_default: qup-i2c1-state {
+				pins = "gpio24", "gpio25";
+				function = "qup0_se1";
+			};
+
+			qup_i2c2_default: qup-i2c2-state {
+				pins = "gpio36", "gpio37";
+				function = "qup0_se2";
+			};
+
+			qup_i2c3_default: qup-i2c3-state {
+				pins = "gpio28", "gpio29";
+				function = "qup0_se3";
+			};
+
+			qup_i2c4_default: qup-i2c4-state {
+				pins = "gpio32", "gpio33";
+				function = "qup0_se4";
+			};
+
+			qup_i2c5_default: qup-i2c5-state {
+				pins = "gpio36", "gpio37";
+				function = "qup0_se5";
+			};
+
+			qup_i2c7_default: qup-i2c7-state {
+				pins = "gpio40", "gpio41";
+				function = "qup1_se0";
+			};
+
+			qup_i2c8_default: qup-i2c8-state {
+				pins = "gpio42", "gpio43";
+				function = "qup1_se1";
+			};
+
+			qup_i2c9_default: qup-i2c9-state {
+				pins = "gpio46", "gpio47";
+				function = "qup1_se2";
+			};
+
+			qup_i2c10_default: qup-i2c10-state {
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+			};
+
+			qup_i2c11_default: qup-i2c11-state {
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+			};
+
+			qup_i2c12_default: qup-i2c12-state {
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+			};
+
+			qup_i2c13_default: qup-i2c13-state {
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+			};
+
+			qup_i2c14_default: qup-i2c14-state {
+				pins = "gpio80", "gpio81";
+				function = "qup2_se0";
+			};
+
+			qup_i2c15_default: qup-i2c15-state {
+				pins = "gpio84", "gpio85";
+				function = "qup2_se1";
+			};
+
+			qup_i2c16_default: qup-i2c16-state {
+				pins = "gpio86", "gpio87";
+				function = "qup2_se2";
+			};
+
+			qup_i2c17_default: qup-i2c17-state {
+				pins = "gpio91", "gpio92";
+				function = "qup2_se3";
+			};
+
+			qup_i2c18_default: qup-i2c18-state {
+				pins = "gpio95", "gpio96";
+				function = "qup2_se4";
+			};
+
+			qup_i2c19_default: qup-i2c19-state {
+				pins = "gpio99", "gpio100";
+				function = "qup2_se5";
+			};
+
+			qup_i2c20_default: qup-i2c20-state {
+				pins = "gpio97", "gpio98";
+				function = "qup2_se6";
+			};
+
+			qup_i2c21_default: qup-i2c21-state {
+				pins = "gpio13", "gpio14";
+				function = "qup3_se0";
+			};
+
+			qup_spi0_default: qup-spi0-state {
+				pins = "gpio20", "gpio21", "gpio22", "gpio23";
+				function = "qup0_se0";
+			};
+
+			qup_spi1_default: qup-spi1-state {
+				pins = "gpio24", "gpio25", "gpio26", "gpio27";
+				function = "qup0_se1";
+			};
+
+			qup_spi2_default: qup-spi2-state {
+				pins = "gpio36", "gpio37", "gpio38", "gpio39";
+				function = "qup0_se2";
+			};
+
+			qup_spi3_default: qup-spi3-state {
+				pins = "gpio28", "gpio29", "gpio30", "gpio31";
+				function = "qup0_se3";
+			};
+
+			qup_spi4_default: qup-spi4-state {
+				pins = "gpio32", "gpio33", "gpio34", "gpio35";
+				function = "qup0_se4";
+			};
+
+			qup_spi5_default: qup-spi5-state {
+				pins = "gpio36", "gpio37", "gpio38", "gpio39";
+				function = "qup0_se5";
+			};
+
+			qup_spi7_default: qup-spi7-state {
+				pins = "gpio40", "gpio41", "gpio42", "gpio43";
+				function = "qup1_se0";
+			};
+
+			qup_spi8_default: qup-spi8-state {
+				pins = "gpio42", "gpio43", "gpio40", "gpio41";
+				function = "qup1_se1";
+			};
+
+			qup_spi9_default: qup-spi9-state {
+				pins = "gpio46", "gpio47", "gpio44", "gpio45";
+				function = "qup1_se2";
+			};
+
+			qup_spi10_default: qup-spi10-state {
+				pins = "gpio44", "gpio45", "gpio46", "gpio47";
+				function = "qup1_se3";
+			};
+
+			qup_spi11_default: qup-spi11-state {
+				pins = "gpio48", "gpio49", "gpio50", "gpio51";
+				function = "qup1_se4";
+			};
+
+			qup_spi12_default: qup-spi12-state {
+				pins = "gpio52", "gpio53", "gpio54", "gpio55";
+				function = "qup1_se5";
+			};
+
+			qup_spi14_default: qup-spi14-state {
+				pins = "gpio80", "gpio81", "gpio82", "gpio83";
+				function = "qup2_se0";
+			};
+
+			qup_spi15_default: qup-spi15-state {
+				pins = "gpio84", "gpio85", "gpio99", "gpio100";
+				function = "qup2_se1";
+			};
+
+			qup_spi16_default: qup-spi16-state {
+				pins = "gpio86", "gpio87", "gpio88", "gpio89";
+				function = "qup2_se2";
+			};
+
+			qup_spi17_default: qup-spi17-state {
+				pins = "gpio91", "gpio92", "gpio93", "gpio94";
+				function = "qup2_se3";
+			};
+
+			qup_spi18_default: qup-spi18-state {
+				pins = "gpio95", "gpio96", "gpio97", "gpio98";
+				function = "qup2_se4";
+			};
+
+			qup_spi19_default: qup-spi19-state {
+				pins = "gpio99", "gpio100", "gpio84", "gpio85";
+				function = "qup2_se5";
+			};
+
+			qup_spi20_default: qup-spi20-state {
+				pins = "gpio97", "gpio98", "gpio95", "gpio96";
+				function = "qup2_se6";
+			};
+
+			qup_spi21_default: qup-spi21-state {
+				pins = "gpio13", "gpio14", "gpio15", "gpio16";
+				function = "qup3_se0";
+			};
+
+			qup_uart0_default: qup-uart0-state {
+				qup_uart0_cts: qup-uart0-cts-pins {
+					pins = "gpio20";
+					function = "qup0_se0";
+				};
+
+				qup_uart0_rts: qup-uart0-rts-pins {
+					pins = "gpio21";
+					function = "qup0_se0";
+				};
+
+				qup_uart0_tx: qup-uart0-tx-pins {
+					pins = "gpio22";
+					function = "qup0_se0";
+				};
+
+				qup_uart0_rx: qup-uart0-rx-pins {
+					pins = "gpio23";
+					function = "qup0_se0";
+				};
+			};
+
+			qup_uart1_default: qup-uart1-state {
+				qup_uart1_cts: qup-uart1-cts-pins {
+					pins = "gpio24";
+					function = "qup0_se1";
+				};
+
+				qup_uart1_rts: qup-uart1-rts-pins {
+					pins = "gpio25";
+					function = "qup0_se1";
+				};
+
+				qup_uart1_tx: qup-uart1-tx-pins {
+					pins = "gpio26";
+					function = "qup0_se1";
+				};
+
+				qup_uart1_rx: qup-uart1-rx-pins {
+					pins = "gpio27";
+					function = "qup0_se1";
+				};
+			};
+
+			qup_uart2_default: qup-uart2-state {
+				qup_uart2_cts: qup-uart2-cts-pins {
+					pins = "gpio36";
+					function = "qup0_se2";
+				};
+
+				qup_uart2_rts: qup-uart2-rts-pins {
+					pins = "gpio37";
+					function = "qup0_se2";
+				};
+
+				qup_uart2_tx: qup-uart2-tx-pins {
+					pins = "gpio38";
+					function = "qup0_se2";
+				};
+
+				qup_uart2_rx: qup-uart2-rx-pins {
+					pins = "gpio39";
+					function = "qup0_se2";
+				};
+			};
+
+			qup_uart3_default: qup-uart3-state {
+				qup_uart3_cts: qup-uart3-cts-pins {
+					pins = "gpio28";
+					function = "qup0_se3";
+				};
+
+				qup_uart3_rts: qup-uart3-rts-pins {
+					pins = "gpio29";
+					function = "qup0_se3";
+				};
+
+				qup_uart3_tx: qup-uart3-tx-pins {
+					pins = "gpio30";
+					function = "qup0_se3";
+				};
+
+				qup_uart3_rx: qup-uart3-rx-pins {
+					pins = "gpio31";
+					function = "qup0_se3";
+				};
+			};
+
+			qup_uart4_default: qup-uart4-state {
+				qup_uart4_cts: qup-uart4-cts-pins {
+					pins = "gpio32";
+					function = "qup0_se4";
+				};
+
+				qup_uart4_rts: qup-uart4-rts-pins {
+					pins = "gpio33";
+					function = "qup0_se4";
+				};
+
+				qup_uart4_tx: qup-uart4-tx-pins {
+					pins = "gpio34";
+					function = "qup0_se4";
+				};
+
+				qup_uart4_rx: qup-uart4-rx-pins {
+					pins = "gpio35";
+					function = "qup0_se4";
+				};
+			};
+
+			qup_uart5_default: qup-uart5-state {
+				qup_uart5_cts: qup-uart5-cts-pins {
+					pins = "gpio36";
+					function = "qup0_se5";
+				};
+
+				qup_uart5_rts: qup-uart5-rts-pins {
+					pins = "gpio37";
+					function = "qup0_se5";
+				};
+
+				qup_uart5_tx: qup-uart5-tx-pins {
+					pins = "gpio38";
+					function = "qup0_se5";
+				};
+
+				qup_uart5_rx: qup-uart5-rx-pins {
+					pins = "gpio39";
+					function = "qup0_se5";
+				};
+			};
+
+			qup_uart7_default: qup-uart7-state {
+				qup_uart7_cts: qup-uart7-cts-pins {
+					pins = "gpio40";
+					function = "qup1_se0";
+				};
+
+				qup_uart7_rts: qup-uart7-rts-pins {
+					pins = "gpio41";
+					function = "qup1_se0";
+				};
+
+				qup_uart7_tx: qup-uart7-tx-pins {
+					pins = "gpio42";
+					function = "qup1_se0";
+				};
+
+				qup_uart7_rx: qup-uart7-rx-pins {
+					pins = "gpio43";
+					function = "qup1_se0";
+				};
+			};
+
+			qup_uart8_default: qup-uart8-state {
+				qup_uart8_cts: qup-uart8-cts-pins {
+					pins = "gpio42";
+					function = "qup1_se1";
+				};
+
+				qup_uart8_rts: qup-uart8-rts-pins {
+					pins = "gpio43";
+					function = "qup1_se1";
+				};
+
+				qup_uart8_tx: qup-uart8-tx-pins {
+					pins = "gpio40";
+					function = "qup1_se1";
+				};
+
+				qup_uart8_rx: qup-uart8-rx-pins {
+					pins = "gpio41";
+					function = "qup1_se1";
+				};
+			};
+
+			qup_uart9_default: qup-uart9-state {
+				qup_uart9_cts: qup-uart9-cts-pins {
+					pins = "gpio46";
+					function = "qup1_se2";
+				};
+
+				qup_uart9_rts: qup-uart9-rts-pins {
+					pins = "gpio47";
+					function = "qup1_se2";
+				};
+
+				qup_uart9_tx: qup-uart9-tx-pins {
+					pins = "gpio44";
+					function = "qup1_se2";
+				};
+
+				qup_uart9_rx: qup-uart9-rx-pins {
+					pins = "gpio45";
+					function = "qup1_se2";
+				};
+			};
+
+			qup_uart10_default: qup-uart10-state {
+				pins = "gpio46", "gpio47";
+				function = "qup1_se3";
+			};
+
+			qup_uart11_default: qup-uart11-state {
+				qup_uart11_cts: qup-uart11-cts-pins {
+					pins = "gpio48";
+					function = "qup1_se4";
+				};
+
+				qup_uart11_rts: qup-uart11-rts-pins {
+					pins = "gpio49";
+					function = "qup1_se4";
+				};
+
+				qup_uart11_tx: qup-uart11-tx-pins {
+					pins = "gpio50";
+					function = "qup1_se4";
+				};
+
+				qup_uart11_rx: qup-uart11-rx-pins {
+					pins = "gpio51";
+					function = "qup1_se4";
+				};
+			};
+
+			qup_uart12_default: qup-uart12-state {
+				qup_uart12_cts: qup-uart12-cts-pins {
+					pins = "gpio52";
+					function = "qup1_se5";
+				};
+
+				qup_uart12_rts: qup-uart12-rts-pins {
+					pins = "gpio53";
+					function = "qup1_se5";
+				};
+
+				qup_uart12_tx: qup-uart12-tx-pins {
+					pins = "gpio54";
+					function = "qup1_se5";
+				};
+
+				qup_uart12_rx: qup-uart12-rx-pins {
+					pins = "gpio55";
+					function = "qup1_se5";
+				};
+			};
+
+			qup_uart14_default: qup-uart14-state {
+				qup_uart14_cts: qup-uart14-cts-pins {
+					pins = "gpio80";
+					function = "qup2_se0";
+				};
+
+				qup_uart14_rts: qup-uart14-rts-pins {
+					pins = "gpio81";
+					function = "qup2_se0";
+				};
+
+				qup_uart14_tx: qup-uart14-tx-pins {
+					pins = "gpio82";
+					function = "qup2_se0";
+				};
+
+				qup_uart14_rx: qup-uart14-rx-pins {
+					pins = "gpio83";
+					function = "qup2_se0";
+				};
+			};
+
+			qup_uart15_default: qup-uart15-state {
+				qup_uart15_cts: qup-uart15-cts-pins {
+					pins = "gpio84";
+					function = "qup2_se1";
+				};
+
+				qup_uart15_rts: qup-uart15-rts-pins {
+					pins = "gpio85";
+					function = "qup2_se1";
+				};
+
+				qup_uart15_tx: qup-uart15-tx-pins {
+					pins = "gpio99";
+					function = "qup2_se1";
+				};
+
+				qup_uart15_rx: qup-uart15-rx-pins {
+					pins = "gpio100";
+					function = "qup2_se1";
+				};
+			};
+
+			qup_uart16_default: qup-uart16-state {
+				qup_uart16_cts: qup-uart16-cts-pins {
+					pins = "gpio86";
+					function = "qup2_se2";
+				};
+
+				qup_uart16_rts: qup-uart16-rts-pins {
+					pins = "gpio87";
+					function = "qup2_se2";
+				};
+
+				qup_uart16_tx: qup-uart16-tx-pins {
+					pins = "gpio88";
+					function = "qup2_se2";
+				};
+
+				qup_uart16_rx: qup-uart16-rx-pins {
+					pins = "gpio89";
+					function = "qup2_se2";
+				};
+			};
+
+			qup_uart17_default: qup-uart17-state {
+				qup_uart17_cts: qup-uart17-cts-pins {
+					pins = "gpio91";
+					function = "qup2_se3";
+				};
+
+				qup_uart17_rts: qup0-uart17-rts-pins {
+					pins = "gpio92";
+					function = "qup2_se3";
+				};
+
+				qup_uart17_tx: qup0-uart17-tx-pins {
+					pins = "gpio93";
+					function = "qup2_se3";
+				};
+
+				qup_uart17_rx: qup0-uart17-rx-pins {
+					pins = "gpio94";
+					function = "qup2_se3";
+				};
+			};
+
+			qup_uart18_default: qup-uart18-state {
+				qup_uart18_cts: qup-uart18-cts-pins {
+					pins = "gpio95";
+					function = "qup2_se4";
+				};
+
+				qup_uart18_rts: qup-uart18-rts-pins {
+					pins = "gpio96";
+					function = "qup2_se4";
+				};
+
+				qup_uart18_tx: qup-uart18-tx-pins {
+					pins = "gpio97";
+					function = "qup2_se4";
+				};
+
+				qup_uart18_rx: qup-uart18-rx-pins {
+					pins = "gpio98";
+					function = "qup2_se4";
+				};
+			};
+
+			qup_uart19_default: qup-uart19-state {
+				qup_uart19_cts: qup-uart19-cts-pins {
+					pins = "gpio99";
+					function = "qup2_se5";
+				};
+
+				qup_uart19_rts: qup-uart19-rts-pins {
+					pins = "gpio100";
+					function = "qup2_se5";
+				};
+
+				qup_uart19_tx: qup-uart19-tx-pins {
+					pins = "gpio84";
+					function = "qup2_se5";
+				};
+
+				qup_uart19_rx: qup-uart19-rx-pins {
+					pins = "gpio85";
+					function = "qup2_se5";
+				};
+			};
+
+			qup_uart20_default: qup-uart20-state {
+				qup_uart20_cts: qup-uart20-cts-pins {
+					pins = "gpio97";
+					function = "qup2_se6";
+				};
+
+				qup_uart20_rts: qup-uart20-rts-pins {
+					pins = "gpio98";
+					function = "qup2_se6";
+				};
+
+				qup_uart20_tx: qup-uart20-tx-pins {
+					pins = "gpio95";
+					function = "qup2_se6";
+				};
+
+				qup_uart20_rx: qup-uart20-rx-pins {
+					pins = "gpio96";
+					function = "qup2_se6";
+				};
+			};
+
+			qup_uart21_default: qup-uart21-state {
+				qup_uart21_cts: qup-uart21-cts-pins {
+					pins = "gpio13";
+					function = "qup3_se0";
+				};
+
+				qup_uart21_rts: qup-uart21-rts-pins {
+					pins = "gpio14";
+					function = "qup3_se0";
+				};
+
+				qup_uart21_tx: qup-uart21-tx-pins {
+					pins = "gpio15";
+					function = "qup3_se0";
+				};
+
+				qup_uart21_rx: qup-uart21-rx-pins {
+					pins = "gpio16";
+					function = "qup3_se0";
+				};
+			};
+
+			sdc_default: sdc-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdc_sleep: sdc-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		sram: sram@146d8000 {
+			compatible = "qcom,sa8775p-imem", "syscon", "simple-mfd";
+			reg = <0x0 0x146d8000 0x0 0x1000>;
+			ranges = <0x0 0x0 0x146d8000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie_smmu: iommu@15200000 {
+			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15200000 0x0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+
+			interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 925 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 926 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 927 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 928 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 955 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 956 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 957 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 958 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 888 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 855 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt";
+			reg = <0x0 0x17c10000 0x0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		memtimer: timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			ranges = <0x0 0x0 0x0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17c21000 {
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@17c23000 {
+				reg = <0x17c23000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				reg = <0x17c25000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				reg = <0x17c27000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				reg = <0x17c29000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				reg = <0x17c2b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				reg = <0x17c2d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS 2>,
+					  <SLEEP_TCS 3>,
+					  <WAKE_TCS 3>,
+					  <CONTROL_TCS 0>;
+			label = "apps_rsc";
+			power-domains = <&system_pd>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sa8775p-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board_clk>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sa8775p-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-0 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		epss_l3_cl0: interconnect@18590000 {
+			compatible = "qcom,sa8775p-epss-l3",
+				     "qcom,epss-l3";
+			reg = <0x0 0x18590000 0x0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sa8775p-cpufreq-epss",
+				     "qcom,cpufreq-epss";
+			reg = <0x0 0x18591000 0x0 0x1000>,
+			      <0x0 0x18593000 0x0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+
+		epss_l3_cl1: interconnect@18592000 {
+			compatible = "qcom,sa8775p-epss-l3",
+				     "qcom,epss-l3";
+			reg = <0x0 0x18592000 0x0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
+		remoteproc_gpdsp0: remoteproc@20c00000 {
+			compatible = "qcom,sa8775p-gpdsp0-pas";
+			reg = <0x0 0x20c00000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_gpdsp0_in 0 0>,
+					      <&smp2p_gpdsp0_in 1 0>,
+					      <&smp2p_gpdsp0_in 2 0>,
+					      <&smp2p_gpdsp0_in 3 0>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SA8775P_CX>,
+					<&rpmhpd SA8775P_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			interconnects = <&gpdsp_anoc MASTER_DSP0 0
+					 &config_noc SLAVE_CLK_CTL 0>;
+
+			memory-region = <&pil_gdsp0_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_gpdsp0_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_GPDSP0
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "gpdsp0";
+				qcom,remote-pid = <17>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "gdsp0";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x38a1 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x38a2 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x38a3 0x0>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+
+		remoteproc_gpdsp1: remoteproc@21c00000 {
+			compatible = "qcom,sa8775p-gpdsp1-pas";
+			reg = <0x0 0x21c00000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_gpdsp1_in 0 0>,
+					      <&smp2p_gpdsp1_in 1 0>,
+					      <&smp2p_gpdsp1_in 2 0>,
+					      <&smp2p_gpdsp1_in 3 0>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SA8775P_CX>,
+					<&rpmhpd SA8775P_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			interconnects = <&gpdsp_anoc MASTER_DSP1 0
+					 &config_noc SLAVE_CLK_CTL 0>;
+
+			memory-region = <&pil_gdsp1_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_gpdsp1_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_GPDSP1
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "gpdsp1";
+				qcom,remote-pid = <18>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "gdsp1";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x38c1 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x38c2 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x38c3 0x0>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+
+		dispcc1: clock-controller@22100000 {
+			compatible = "qcom,sa8775p-dispcc1";
+			reg = <0x0 0x22100000 0x0 0x20000>;
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <0>, <0>, <0>, <0>,
+				 <0>, <0>, <0>, <0>;
+			power-domains = <&rpmhpd SA8775P_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
+		ethernet1: ethernet@23000000 {
+			compatible = "qcom,sa8775p-ethqos";
+			reg = <0x0 0x23000000 0x0 0x10000>,
+			      <0x0 0x23016000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "sfty";
+
+			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
+				 <&gcc GCC_EMAC1_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC1_PTP_CLK>,
+				 <&gcc GCC_EMAC1_PHY_AUX_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "phyaux";
+
+			interconnects = <&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mac-mem", "cpu-mac";
+
+			power-domains = <&gcc EMAC1_GDSC>;
+
+			phys = <&serdes1>;
+			phy-names = "serdes";
+
+			iommus = <&apps_smmu 0x140 0xf>;
+			dma-coherent;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <16384>;
+			tx-fifo-depth = <16384>;
+
+			status = "disabled";
+		};
+
+		ethernet0: ethernet@23040000 {
+			compatible = "qcom,sa8775p-ethqos";
+			reg = <0x0 0x23040000 0x0 0x10000>,
+			      <0x0 0x23056000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "sfty";
+
+			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
+				 <&gcc GCC_EMAC0_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC0_PTP_CLK>,
+				 <&gcc GCC_EMAC0_PHY_AUX_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "phyaux";
+
+			interconnects = <&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mac-mem", "cpu-mac";
+
+			power-domains = <&gcc EMAC0_GDSC>;
+
+			phys = <&serdes0>;
+			phy-names = "serdes";
+
+			iommus = <&apps_smmu 0x120 0xf>;
+			dma-coherent;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <16384>;
+			tx-fifo-depth = <16384>;
+
+			status = "disabled";
+		};
+
+		remoteproc_cdsp0: remoteproc@26300000 {
+			compatible = "qcom,sa8775p-cdsp0-pas";
+			reg = <0x0 0x26300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SA8775P_CX>,
+					<&rpmhpd SA8775P_MXC>,
+					<&rpmhpd SA8775P_NSP0>;
+			power-domain-names = "cx", "mxc", "nsp";
+
+			interconnects = <&nspa_noc MASTER_CDSP_PROC 0
+					 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_cdsp0_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp0_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x2141 0x04a0>,
+							 <&apps_smmu 0x2181 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x2142 0x04a0>,
+							 <&apps_smmu 0x2182 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2143 0x04a0>,
+							 <&apps_smmu 0x2183 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2144 0x04a0>,
+							 <&apps_smmu 0x2184 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2145 0x04a0>,
+							 <&apps_smmu 0x2185 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x2146 0x04a0>,
+							 <&apps_smmu 0x2186 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x2147 0x04a0>,
+							 <&apps_smmu 0x2187 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x2148 0x04a0>,
+							 <&apps_smmu 0x2188 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@9 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <9>;
+						iommus = <&apps_smmu 0x2149 0x04a0>,
+							 <&apps_smmu 0x2189 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&apps_smmu 0x214b 0x04a0>,
+							 <&apps_smmu 0x218b 0x0400>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+
+		remoteproc_cdsp1: remoteproc@2a300000 {
+			compatible = "qcom,sa8775p-cdsp1-pas";
+			reg = <0x0 0x2A300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SA8775P_CX>,
+					<&rpmhpd SA8775P_MXC>,
+					<&rpmhpd SA8775P_NSP1>;
+			power-domain-names = "cx", "mxc", "nsp";
+
+			interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0
+					 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_cdsp1_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp1_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_NSP1
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <12>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp1";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x2941 0x04a0>,
+							 <&apps_smmu 0x2981 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x2942 0x04a0>,
+							 <&apps_smmu 0x2982 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2943 0x04a0>,
+							 <&apps_smmu 0x2983 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2944 0x04a0>,
+							 <&apps_smmu 0x2984 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2945 0x04a0>,
+							 <&apps_smmu 0x2985 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x2946 0x04a0>,
+							 <&apps_smmu 0x2986 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x2947 0x04a0>,
+							 <&apps_smmu 0x2987 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x2948 0x04a0>,
+							 <&apps_smmu 0x2988 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@9 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <9>;
+						iommus = <&apps_smmu 0x2949 0x04a0>,
+							 <&apps_smmu 0x2989 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@10 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <10>;
+						iommus = <&apps_smmu 0x294a 0x04a0>,
+							 <&apps_smmu 0x298a 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&apps_smmu 0x294b 0x04a0>,
+							 <&apps_smmu 0x298b 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&apps_smmu 0x294c 0x04a0>,
+							 <&apps_smmu 0x298c 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+						iommus = <&apps_smmu 0x294d 0x04a0>,
+							 <&apps_smmu 0x298d 0x0400>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,sa8775p-adsp-pas";
+			reg = <0x0 0x30000000 0x0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SA8775P_LCX>,
+					<&rpmhpd SA8775P_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					memory-region = <&adsp_rpc_remote_heap_mem>;
+					qcom,vmids = <QCOM_SCM_VMID_LPASS
+							  QCOM_SCM_VMID_ADSP_HEAP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x3003 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x3004 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x3005 0x0>;
+						qcom,nsessions = <5>;
+						dma-coherent;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x3001 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		aoss-0-thermal {
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-0-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-1-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-2-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-3-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-2-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		audio-thermal {
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camss-0-thermal {
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pcie-0-thermal {
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-0-0-thermal {
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-1-thermal {
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-0-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-1-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-2-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-3-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-3-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-4-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-5-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		video-thermal {
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camss-1-thermal {
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pcie-1-thermal {
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-0-1-thermal {
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-2-thermal {
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-0-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-1-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-2-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-3-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-0-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-1-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-2-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-0-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-1-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-2-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		ddrss-0-thermal {
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-1-0-thermal {
+			thermal-sensors = <&tsens2 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-3-thermal {
+			thermal-sensors = <&tsens3 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-0-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-1-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-2-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-3-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-0-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-1-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-2-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-0-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-1-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-2-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		ddrss-1-thermal {
+			thermal-sensors = <&tsens3 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-1-1-thermal {
+			thermal-sensors = <&tsens3 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	arch_timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pcie0: pcie@1c00000 {
+		compatible = "qcom,pcie-sa8775p";
+		reg = <0x0 0x01c00000 0x0 0x3000>,
+		      <0x0 0x40000000 0x0 0xf20>,
+		      <0x0 0x40000f20 0x0 0xa8>,
+		      <0x0 0x40001000 0x0 0x4000>,
+		      <0x0 0x40100000 0x0 0x100000>,
+		      <0x0 0x01c03000 0x0 0x1000>;
+		reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+		device_type = "pci";
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+			 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+		bus-range = <0x00 0xff>;
+
+		dma-coherent;
+
+		linux,pci-domain = <0>;
+		num-lanes = <2>;
+
+		interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi0",
+				  "msi1",
+				  "msi2",
+				  "msi3",
+				  "msi4",
+				  "msi5",
+				  "msi6",
+				  "msi7",
+				  "global";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+			 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+			 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+			 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+
+		clock-names = "aux",
+			      "cfg",
+			      "bus_master",
+			      "bus_slave",
+			      "slave_q2a";
+
+		assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+		assigned-clock-rates = <19200000>;
+
+		interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+		interconnect-names = "pcie-mem", "cpu-pcie";
+
+		iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
+			    <0x100 &pcie_smmu 0x0001 0x1>;
+
+		resets = <&gcc GCC_PCIE_0_BCR>,
+			 <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
+		reset-names = "pci",
+			      "link_down";
+
+		power-domains = <&gcc PCIE_0_GDSC>;
+
+		phys = <&pcie0_phy>;
+		phy-names = "pciephy";
+
+		eq-presets-8gts = /bits/ 16 <0x5555 0x5555>;
+		eq-presets-16gts = /bits/ 8 <0x55 0x55>;
+
+		status = "disabled";
+
+		pcieport0: pcie@0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			bus-range = <0x01 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+		};
+	};
+
+	pcie0_ep: pcie-ep@1c00000 {
+		compatible = "qcom,sa8775p-pcie-ep";
+		reg = <0x0 0x01c00000 0x0 0x3000>,
+		      <0x0 0x40000000 0x0 0xf20>,
+		      <0x0 0x40000f20 0x0 0xa8>,
+		      <0x0 0x40001000 0x0 0x4000>,
+		      <0x0 0x40200000 0x0 0x1fe00000>,
+		      <0x0 0x01c03000 0x0 0x1000>,
+		      <0x0 0x40005000 0x0 0x2000>;
+		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+			    "mmio", "dma";
+
+		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+			<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+			<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+			<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+			<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+
+		clock-names = "aux",
+			      "cfg",
+			      "bus_master",
+			      "bus_slave",
+			      "slave_q2a";
+
+		interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-names = "global", "doorbell", "dma";
+
+		interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+		interconnect-names = "pcie-mem", "cpu-pcie";
+
+		dma-coherent;
+		iommus = <&pcie_smmu 0x0000 0x7f>;
+		resets = <&gcc GCC_PCIE_0_BCR>;
+		reset-names = "core";
+		power-domains = <&gcc PCIE_0_GDSC>;
+		phys = <&pcie0_phy>;
+		phy-names = "pciephy";
+		num-lanes = <2>;
+		linux,pci-domain = <0>;
+
+		status = "disabled";
+	};
+
+	pcie0_phy: phy@1c04000 {
+		compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
+		reg = <0x0 0x1c04000 0x0 0x2000>;
+
+		clocks = <&gcc GCC_PCIE_0_PHY_AUX_CLK>,
+			 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_CLKREF_EN>,
+			 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+			 <&gcc GCC_PCIE_0_PIPE_CLK>,
+			 <&gcc GCC_PCIE_0_PIPEDIV2_CLK>;
+		clock-names = "aux",
+			      "cfg_ahb",
+			      "ref",
+			      "rchng",
+			      "pipe",
+			      "pipediv2";
+
+		assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+		assigned-clock-rates = <100000000>;
+
+		resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+		reset-names = "phy";
+
+		#clock-cells = <0>;
+		clock-output-names = "pcie_0_pipe_clk";
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+
+	pcie1: pcie@1c10000 {
+		compatible = "qcom,pcie-sa8775p";
+		reg = <0x0 0x01c10000 0x0 0x3000>,
+		      <0x0 0x60000000 0x0 0xf20>,
+		      <0x0 0x60000f20 0x0 0xa8>,
+		      <0x0 0x60001000 0x0 0x4000>,
+		      <0x0 0x60100000 0x0 0x100000>,
+		      <0x0 0x01c13000 0x0 0x1000>;
+		reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+		device_type = "pci";
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+			 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x1fd00000>;
+		bus-range = <0x00 0xff>;
+
+		dma-coherent;
+
+		linux,pci-domain = <1>;
+		num-lanes = <4>;
+
+		interrupts = <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi0",
+				  "msi1",
+				  "msi2",
+				  "msi3",
+				  "msi4",
+				  "msi5",
+				  "msi6",
+				  "msi7",
+				  "global";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+			 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+			 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+			 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
+
+		clock-names = "aux",
+			      "cfg",
+			      "bus_master",
+			      "bus_slave",
+			      "slave_q2a";
+
+		assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+		assigned-clock-rates = <19200000>;
+
+		interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>;
+		interconnect-names = "pcie-mem", "cpu-pcie";
+
+		iommu-map = <0x0 &pcie_smmu 0x0080 0x1>,
+			    <0x100 &pcie_smmu 0x0081 0x1>;
+
+		resets = <&gcc GCC_PCIE_1_BCR>,
+			 <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+		reset-names = "pci",
+			      "link_down";
+
+		power-domains = <&gcc PCIE_1_GDSC>;
+
+		phys = <&pcie1_phy>;
+		phy-names = "pciephy";
+
+		eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>;
+		eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>;
+
+		status = "disabled";
+
+		pcie@0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			bus-range = <0x01 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+		};
+	};
+
+	pcie1_ep: pcie-ep@1c10000 {
+		compatible = "qcom,sa8775p-pcie-ep";
+		reg = <0x0 0x01c10000 0x0 0x3000>,
+		      <0x0 0x60000000 0x0 0xf20>,
+		      <0x0 0x60000f20 0x0 0xa8>,
+		      <0x0 0x60001000 0x0 0x4000>,
+		      <0x0 0x60200000 0x0 0x1fe00000>,
+		      <0x0 0x01c13000 0x0 0x1000>,
+		      <0x0 0x60005000 0x0 0x2000>;
+		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+			    "mmio", "dma";
+
+		clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+			 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+			 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+			 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
+
+		clock-names = "aux",
+			      "cfg",
+			      "bus_master",
+			      "bus_slave",
+			      "slave_q2a";
+
+		interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-names = "global", "doorbell", "dma";
+
+		interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>;
+		interconnect-names = "pcie-mem", "cpu-pcie";
+
+		dma-coherent;
+		iommus = <&pcie_smmu 0x80 0x7f>;
+		resets = <&gcc GCC_PCIE_1_BCR>;
+		reset-names = "core";
+		power-domains = <&gcc PCIE_1_GDSC>;
+		phys = <&pcie1_phy>;
+		phy-names = "pciephy";
+		num-lanes = <4>;
+		linux,pci-domain = <1>;
+
+		status = "disabled";
+	};
+
+	pcie1_phy: phy@1c14000 {
+		compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
+		reg = <0x0 0x1c14000 0x0 0x4000>;
+
+		clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+			 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_CLKREF_EN>,
+			 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+			 <&gcc GCC_PCIE_1_PIPE_CLK>,
+			 <&gcc GCC_PCIE_1_PIPEDIV2_CLK>;
+		clock-names = "aux",
+			      "cfg_ahb",
+			      "ref",
+			      "rchng",
+			      "pipe",
+			      "pipediv2";
+
+		assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+		assigned-clock-rates = <100000000>;
+
+		resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+		reset-names = "phy";
+
+		#clock-cells = <0>;
+		clock-output-names = "pcie_1_pipe_clk";
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts
new file mode 100644
index 000000000000..e72cf6725a52
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts
@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "qcs8300.dtsi"
+#include "qcs8300-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Monaco EVK";
+	compatible = "qcom,monaco-evk", "qcom,qcs8300";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		i2c1 = &i2c1;
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dmic: audio-codec-0 {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+		num-channels = <1>;
+	};
+
+	max98357a: audio-codec-1 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+	};
+
+	sound {
+		compatible = "qcom,qcs8275-sndcard";
+		model = "MONACO-EVK";
+
+		pinctrl-0 = <&hs0_mi2s_active>, <&mi2s1_active>;
+		pinctrl-names = "default";
+
+		hs0-mi2s-playback-dai-link {
+			link-name = "HS0 MI2S Playback";
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		sec-mi2s-capture-dai-link {
+			link-name = "Secondary MI2S Capture";
+
+			codec {
+				sound-dai = <&dmic>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai SECONDARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s5c: smps5 {
+			regulator-name = "vreg_s5c";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <512000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-mode = "2500base-x";
+	phy-handle = <&hsgmii_phy0>;
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	nvmem-cells = <&mac_addr0>;
+	nvmem-cell-names = "mac-address";
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hsgmii_phy0: ethernet-phy@1c {
+			compatible = "ethernet-phy-id004d.d101";
+			reg = <0x1c>;
+			reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcs8300/a623_zap.mbn";
+};
+
+&i2c1 {
+	pinctrl-0 = <&qup_i2c1_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_addr0: mac-addr@0 {
+				reg = <0x0 0x6>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	pinctrl-0 = <&qup_i2c15_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	expander0: gpio@38 {
+		compatible = "ti,tca9538";
+		reg = <0x38>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander1: gpio@39 {
+		compatible = "ti,tca9538";
+		reg = <0x39>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander2: gpio@3a {
+		compatible = "ti,tca9538";
+		reg = <0x3a>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander3: gpio@3b {
+		compatible = "ti,tca9538";
+		reg = <0x3b>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander4: gpio@3c {
+		compatible = "ti,tca9538";
+		reg = <0x3c>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander5: gpio@3d {
+		compatible = "ti,tca9538";
+		reg = <0x3d>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander6: gpio@3e {
+		compatible = "ti,tca9538";
+		reg = <0x3e>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&iris {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs8300/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs8300/cdsp0.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_gpdsp {
+	firmware-name = "qcom/qcs8300/gpdsp0.mbn";
+
+	status = "okay";
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio5";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio6";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	qup_i2c1_default: qup-i2c1-state {
+		pins = "gpio19", "gpio20";
+		function = "qup0_se1";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_i2c15_default: qup-i2c15-state {
+		pins = "gpio91", "gpio92";
+		function = "qup1_se7";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l7c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l7a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts
new file mode 100644
index 000000000000..fba68bf8bf79
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-fortuna-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Grand Prime (SM-G530H)";
+	compatible = "samsung,fortuna3g", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1000000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
+&st_accel {
+	status = "okay";
+};
+
+&st_magn {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
index 57a74eea1005..3a6eba904641 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -3,10 +3,12 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 /*
  * NOTE: The original firmware from Acer can only boot 32-bit kernels.
@@ -83,6 +85,29 @@
 	};
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -108,9 +133,23 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x4500000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <150 237 450 500 590>;
+	qcom,mbhc-vthreshold-high = <150 237 450 500 590>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -146,6 +185,20 @@
 	status = "okay";
 };
 
+&sound {
+	model = "acer-a1-724";
+	audio-routing =
+		"DMIC1", "MIC BIAS External1",
+		"DMIC1", "Digital Mic1",
+		"AMIC2", "MIC BIAS Internal2",
+		"DMIC2", "MIC BIAS External1",
+		"DMIC2", "Digital Mic2";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &pri_mi2s_mclk_default &cdc_dmic_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &pri_mi2s_mclk_sleep &cdc_dmic_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
 &usb {
 	extcon = <&usb_id>, <&usb_id>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index aa4c1ab1e673..2de8b6f9531b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -22,6 +24,19 @@
 		stdout-path = "serial0";
 	};
 
+	reserved-memory {
+		/delete-node/ reserved@86680000;
+		/delete-node/ rmtfs@86700000;
+
+		rmtfs: rmtfs@86680000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x86680000 0x0 0x160000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -50,6 +65,17 @@
 		};
 	};
 
+	reg_headphones_avdd: regulator-headphones-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "headphones_avdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&headphones_avdd_default>;
+		pinctrl-names = "default";
+	};
+
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
 		id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
@@ -58,8 +84,41 @@
 	};
 };
 
-&blsp_uart2 {
+&blsp_i2c3 {
 	status = "okay";
+
+	headphones: audio-codec@10 {
+		compatible = "asahi-kasei,ak4375";
+		reg = <0x10>;
+		avdd-supply = <&reg_headphones_avdd>;
+		tvdd-supply = <&pm8916_l6>;
+		pdn-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&headphones_pdn_default>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <0>;
+	};
+
+	speaker_codec_top: audio-codec@34 {
+		compatible = "nxp,tfa9897";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l6>;
+		rcv-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&speaker_top_default>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Top";
+		#sound-dai-cells = <0>;
+	};
+
+	speaker_codec_bottom: audio-codec@36 {
+		compatible = "nxp,tfa9897";
+		reg = <0x36>;
+		vddd-supply = <&pm8916_l6>;
+		rcv-gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&speaker_bottom_default>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Bottom";
+		#sound-dai-cells = <0>;
+	};
 };
 
 &blsp_i2c4 {
@@ -153,6 +212,25 @@
 	};
 };
 
+&blsp_uart2 {
+	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -169,6 +247,17 @@
 	status = "okay";
 };
 
+&q6afedai {
+	dai@18 {
+		reg = <SECONDARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -183,6 +272,54 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	/* Add pin switches for speakers to allow disabling them individually */
+	model = "alcatel-idol3";
+	widgets =
+		"Speaker", "Speaker Top",
+		"Speaker", "Speaker Bottom";
+	pin-switches = "Speaker Top", "Speaker Bottom";
+	audio-routing =
+		"Speaker Top", "Speaker Top OUT",
+		"Speaker Bottom", "Speaker Bottom OUT",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &pri_mi2s_default &pri_mi2s_ws_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &pri_mi2s_sleep &pri_mi2s_ws_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>;
+		};
+	};
+};
+
+&sound_link_backend0 {
+	/* Primary MI2S is not used, replace with Secondary MI2S for headphones */
+	link-name = "Secondary MI2S";
+
+	cpu {
+		sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
+	};
+	platform {
+		sound-dai = <&q6routing>;
+	};
+	codec {
+		sound-dai = <&headphones>;
+	};
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -212,6 +349,15 @@
 	status = "okay";
 };
 
+/* Only some of the pins are used */
+&pri_mi2s_default {
+	pins = "gpio113", "gpio115";
+};
+
+&pri_mi2s_sleep {
+	pins = "gpio113", "gpio115";
+};
+
 &tlmm {
 	accel_int_default: accel-int-default-state {
 		pins = "gpio31";
@@ -245,6 +391,20 @@
 		bias-disable;
 	};
 
+	headphones_avdd_default: headphones-avdd-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	headphones_pdn_default: headphones-pdn-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	/*
 	 * The OEM wired an additional GPIO to be asserted so that
 	 * the si-en,sn3190 LED IC works. Since this GPIO is not
@@ -291,6 +451,20 @@
 		bias-disable;
 	};
 
+	speaker_bottom_default: speaker-bottom-default-state {
+		pins = "gpio111";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	speaker_top_default: speaker-top-default-state {
+		pins = "gpio50";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	ts_int_reset_default: ts-int-reset-default-state {
 		pins = "gpio13", "gpio100";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index a8be6ff66893..29d61f8d5dc9 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -128,6 +130,21 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,micbias1-ext-cap;
+	qcom,hphl-jack-type-normally-open;
 };
 
 &pm8916_rpm_regulators {
@@ -151,6 +168,13 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
index b748d140b52e..742a325245c5 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -23,6 +24,28 @@
 		stdout-path = "serial0";
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		voltage-min-design-microvolt = <3700000>;
+		voltage-max-design-microvolt = <4200000>;
+		energy-full-design-microwatt-hours = <13690000>;
+		charge-full-design-microamp-hours = <3700000>;
+
+		ocv-capacity-celsius = <25>;
+		ocv-capacity-table-0 =
+			<4186000 100>, <4126000 95>, <4078000 90>,
+			<4036000 85>, <3997000 80>, <3962000 75>,
+			<3932000 70>, <3904000 65>, <3874000 60>,
+			<3839000 55>, <3809000 50>, <3792000 45>,
+			<3780000 40>, <3772000 35>, <3764000 30>,
+			<3752000 25>, <3731000 20>, <3704000 16>,
+			<3677000 13>, <3670000 11>, <3668000 10>,
+			<3666000 9>, <3662000 8>, <3658000 7>, <3648000 6>,
+			<3624000 5>, <3580000 4>, <3518000 3>, <3434000 2>,
+			<3310000 1>, <3000000 0>;
+	};
+
 	flash-led-controller {
 		/* Actually qcom,leds-gpio-flash */
 		compatible = "sgmicro,sgm3140";
@@ -108,9 +131,28 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_bms {
+	monitored-battery = <&battery>;
 	status = "okay";
 };
 
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <150 180 237 450 500>;
+	qcom,mbhc-vthreshold-high = <150 180 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -141,6 +183,14 @@
 	status = "okay";
 };
 
+&sound {
+	model = "msm8916-1mic";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	extcon = <&usb_id>, <&usb_id>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index bf7fc89dd106..aa414b5d7ee4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -214,6 +214,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &lpass {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts b/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts
new file mode 100644
index 000000000000..22bc73b94344
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "LG Leon LTE";
+	compatible = "lg,c50", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		volume-up-button {
+			label = "Volume Up";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down-button {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	reg_sd_vmmc: regulator-sdcard-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "sdcard-vmmc";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		startup-delay-us = <5000>;
+
+		pinctrl-0 = <&sd_vmmc_en_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+};
+
+&pm8916_usbin {
+	status = "okay";
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&reg_sd_vmmc>;
+
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "peripheral";
+	extcon = <&pm8916_usbin>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_usbin>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sd_vmmc_en_default: sd-vmmc-en-default-state {
+		pins = "gpio60";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts b/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts
new file mode 100644
index 000000000000..c50374979939
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "LG K10 (K420n)";
+	compatible = "lg,m216", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3300000>;
+		voltage-max-design-microvolt = <4350000>;
+		energy-full-design-microwatt-hours = <8800000>;
+		charge-full-design-microamp-hours = <2300000>;
+
+		ocv-capacity-celsius = <25>;
+		ocv-capacity-table-0 = <4342000 100>, <4266000 95>, <4206000 90>,
+			<4148000 85>, <4094000 80>, <4046000 75>, <3994000 70>,
+			<3956000 65>, <3916000 60>, <3866000 55>, <3831000 50>,
+			<3808000 45>, <3789000 40>, <3776000 35>, <3769000 30>,
+			<3760000 25>, <3740000 20>, <3712000 16>, <3684000 13>,
+			<3676000 11>, <3674000 10>, <3672000 9>, <3669000 8>,
+			<3665000 7>, <3660000 6>, <3643000 5>, <3602000 4>,
+			<3542000 3>, <3458000 2>, <3326000 1>, <3000000 0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		volume-up-button {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down-button {
+			label = "Volume Down";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@11 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x11>;
+
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>;
+
+		mount-matrix =	 "0", "1", "0",
+				"-1", "0", "0",
+				 "0", "0", "1";
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+	};
+
+	magnetometer@13 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x13>;
+
+		interrupts-extended = <&tlmm 69 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&magn_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@34 {
+		compatible = "melfas,mip4_ts";
+		reg = <0x34>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+		ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x4a00000>;
+};
+
+&pm8916_bms {
+	monitored-battery = <&battery>;
+	power-supplies = <&pm8916_charger>;
+
+	status = "okay";
+};
+
+&pm8916_charger {
+	qcom,fast-charge-safe-current = <700000>;
+	qcom,fast-charge-safe-voltage = <4300000>;
+
+	monitored-battery = <&battery>;
+	status = "okay";
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
+&usb {
+	dr_mode = "peripheral";
+	extcon = <&pm8916_charger>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_charger>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	magn_int_default: magn-int-default-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		ce-pins {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 47d1c5cb13f4..eb449112a226 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -10,7 +12,7 @@
 
 / {
 	model = "Longcheer L8150";
-	compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916";
+	compatible = "longcheer,l8150", "qcom,msm8916";
 	chassis-type = "handset";
 
 	aliases {
@@ -25,17 +27,45 @@
 
 	/*
 	 * For some reason, the signed wcnss firmware is not relocatable.
-	 * It must be loaded at 0x8b600000. All other firmware is relocatable,
-	 * so place wcnss at the fixed address and then all other firmware
-	 * regions will be automatically allocated at a fitting place.
+	 * It must be loaded at 0x8b600000. Unfortunately, this also means that
+	 * mpss_mem does not fit when loaded to the typical address at 0x86800000.
+	 *
+	 * Load wcnss_mem to the fixed address and relocate mpss_mem to the next
+	 * working higher address. For some reason the modem firmware does not
+	 * boot when placed at 0x8a800000 to 0x8e800000.
 	 */
 	reserved-memory {
+		/delete-node/ mpss@86800000;
 		/delete-node/ wcnss;
 
 		wcnss_mem: wcnss@8b600000 {
 			reg = <0x0 0x8b600000 0x0 0x600000>;
 			no-map;
 		};
+
+		mpss_mem: mpss@8e800000 {
+			reg = <0x0 0x8e800000 0x0 0x5000000>;
+			no-map;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+		energy-full-design-microwatt-hours = <9500000>;
+		charge-full-design-microamp-hours = <2500000>;
+
+		ocv-capacity-celsius = <25>;
+		ocv-capacity-table-0 = <4330000 100>, <4265000 95>,
+			<4208000 90>, <4153000 85>, <4100000 80>, <4049000 75>,
+			<4001000 70>, <3962000 65>, <3919000 60>, <3872000 55>,
+			<3839000 50>, <3817000 45>, <3798000 40>, <3783000 35>,
+			<3767000 30>, <3747000 25>, <3729000 20>, <3709000 16>,
+			<3688000 13>, <3681000 11>, <3680000 10>, <3679000 9>,
+			<3677000 8>, <3674000 7>, <3666000 6>, <3641000 5>,
+			<3597000 4>, <3537000 3>, <3457000 2>, <3336000 1>,
+			<3000000 0>;
 	};
 
 	gpio-keys {
@@ -93,6 +123,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
 
 		led@0 {
 			reg = <0>;
@@ -223,6 +254,32 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
+&pm8916_bms {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+	power-supplies = <&pm8916_charger>;
+};
+
+&pm8916_charger {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+
+	qcom,fast-charge-safe-current = <900000>;
+	qcom,fast-charge-safe-voltage = <4300000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
 };
 
 &pm8916_resin {
@@ -237,10 +294,6 @@
 	};
 };
 
-&pm8916_usbin {
-	status = "okay";
-};
-
 &pm8916_vib {
 	status = "okay";
 };
@@ -254,14 +307,21 @@
 	non-removable;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS Internal1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS Internal3";
+};
+
 &usb {
 	status = "okay";
 	dr_mode = "peripheral";
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
 };
 
 &usb_hs_phy {
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
 };
 
 &venus {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index 41cadb906b98..887764dc55b2 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -3,9 +3,12 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "BQ Aquaris X5 (Longcheer L8910)";
@@ -22,6 +25,16 @@
 		stdout-path = "serial0";
 	};
 
+	speaker_amp: audio-amplifier {
+		compatible = "awinic,aw8738";
+		mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		awinic,mode = <5>;
+		sound-name-prefix = "Speaker Amp";
+
+		pinctrl-0 = <&spk_ext_pa_default>;
+		pinctrl-names = "default";
+	};
+
 	flash-led-controller {
 		compatible = "ocs,ocp8110";
 		enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
@@ -74,6 +87,66 @@
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&status_led_default>;
+		pinctrl-names = "default";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+
+	flash-led-controller@53 {
+		compatible = "silergy,sy7802";
+		reg = <0x53>;
+
+		enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&camera_rear_flash_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			led-sources = <0>, <1>;
+		};
+	};
+};
+
 &blsp_i2c3 {
 	status = "okay";
 
@@ -105,6 +178,30 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_gpios {
+	status_led_default: status-led-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		bias-disable;
+		output-high;
+	};
 };
 
 &pm8916_resin {
@@ -137,6 +234,28 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	/*
+	 * Provide widgets/pin-switches to allow enabling speaker separately.
+	 * The hardware does not provide a way to disable the output via the
+	 * headphone jack when the speaker is enabled.
+	 */
+	model = "bq-paella";
+	widgets =
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+	pin-switches = "Speaker";
+	audio-routing =
+		"Speaker", "Speaker Amp OUT",
+		"Speaker Amp IN", "HPH_R",
+		"Headphones", "HPH_L",
+		"Headphones", "HPH_R",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+	aux-devs = <&speaker_amp>;
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -182,6 +301,13 @@
 		bias-disable;
 	};
 
+	camera_rear_flash_default: camera-rear-flash-default-state {
+		pins = "gpio9", "gpio16", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
@@ -205,6 +331,13 @@
 		bias-disable;
 	};
 
+	spk_ext_pa_default: spk-ext-pa-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
new file mode 100644
index 000000000000..75103168c1fc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * msm8916-modem-qdsp6.dtsi describes the typical modem setup on MSM8916 devices
+ * (or similar SoCs) with audio routed via the QDSP6 services provided by the
+ * modem firmware. The digital/analog codec in the SoC/PMIC is used by default,
+ * but boards can define additional codecs by adding additional backend DAI links.
+ */
+
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+&apr {
+	status = "okay";
+};
+
+&bam_dmux {
+	status = "okay";
+};
+
+&bam_dmux_dma {
+	status = "okay";
+};
+
+&lpass {
+	status = "reserved"; /* Controlled by QDSP6 */
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&mba_mem {
+	status = "okay";
+};
+
+&mpss {
+	status = "okay";
+};
+
+&mpss_mem {
+	status = "okay";
+};
+
+&pm8916_codec {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <0 1>;
+	};
+	dai@20 {
+		reg = <TERTIARY_MI2S_TX>;
+		qcom,sd-lines = <0 1>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@1 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		direction = <Q6ASM_DAI_TX>;
+	};
+	dai@2 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@3 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		direction = <Q6ASM_DAI_RX>;
+		is-compress-dai;
+	};
+};
+
+&sound {
+	compatible = "qcom,msm8916-qdsp6-sndcard";
+	model = "msm8916";
+
+	pinctrl-0 = <&cdc_pdm_default>;
+	pinctrl-1 = <&cdc_pdm_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	frontend0-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	frontend1-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	frontend2-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	frontend3-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	sound_link_backend0: backend0-dai-link {
+		link-name = "Primary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	sound_link_backend1: backend1-dai-link {
+		link-name = "Tertiary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai TERTIARY_MI2S_TX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi
new file mode 100644
index 000000000000..4e202e7ed7db
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		volume-up-button {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-1 = <&usb_id_sleep>;
+		pinctrl-names = "default", "sleep";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	touchscreen: touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vio-supply = <&pm8916_l6>;
+
+		syna,startup-delay-ms = <100>;
+
+		rmi4-f01@1 {
+			reg = <1>;
+			syna,nosleep-mode = <1>; /* Allow sleeping */
+		};
+
+		rmi4-f11@11 {
+			reg = <11>;
+			syna,sensor-type = <1>; /* Touchscreen */
+		};
+	};
+};
+
+&blsp_uart1 {
+	pinctrl-0 = <&blsp_uart1_console_default>;
+	pinctrl-1 = <&blsp_uart1_console_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <3100000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	usb_id_sleep: usb-id-sleep-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts
new file mode 100644
index 000000000000..8380451ebbf6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-motorola-common.dtsi"
+
+/ {
+	model = "Motorola Moto G4 Play";
+	compatible = "motorola,harpia", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	battery@36 {
+		compatible = "maxim,max17050";
+		reg = <0x36>;
+
+		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&battery_alert_default>;
+		pinctrl-names = "default";
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,cold-temp = <(-200)>;
+		maxim,dead-volt = <3200>;
+		maxim,over-volt = <4500>;
+	};
+
+	/* charger@6b */
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "bosch,bma253";
+		reg = <0x19>;
+
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>,
+				      <&tlmm 119 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		mount-matrix = "1",  "0", "0",
+			       "0", "-1", "0",
+			       "0",  "0", "1";
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+	};
+
+	/* proximity@49 */
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,micbias1-ext-cap;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &headset_switch_supply_en
+		     &headset_switch_in>;
+	pinctrl-1 = <&cdc_pdm_sleep &headset_switch_supply_en
+		     &headset_switch_in>;
+	pinctrl-names = "default", "sleep";
+};
+
+&touchscreen {
+	interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+	vdd-supply = <&pm8916_l16>;
+
+	pinctrl-0 = <&ts_int_default>;
+	pinctrl-names = "default";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115", "gpio119";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	battery_alert_default: battery-alert-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	headset_switch_in: headset-switch-in-state {
+		pins = "gpio112";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	headset_switch_supply_en: headset-switch-supply-en-state {
+		pins = "gpio111";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio118";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts
new file mode 100644
index 000000000000..ec5589fc69bd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-motorola-common.dtsi"
+
+/ {
+	model = "Motorola Moto G 2015";
+	compatible = "motorola,osprey", "qcom,msm8916";
+	chassis-type = "handset";
+
+	reg_touch_vdda: regulator-touch-vdda {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_vdda";
+		gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&touch_vdda_default>;
+		pinctrl-names = "default";
+		startup-delay-us = <300>;
+		vin-supply = <&pm8916_l16>;
+	};
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	battery@36 {
+		compatible = "maxim,max17050";
+		reg = <0x36>;
+
+		interrupts-extended = <&tlmm 49 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&battery_alert_default>;
+		pinctrl-names = "default";
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,cold-temp = <(-200)>;
+		maxim,dead-volt = <3200>;
+		maxim,over-volt = <4500>;
+
+	};
+};
+
+&blsp_i2c6 {
+	/* magnetometer@c */
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias2-ext-cap;
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC3", "MIC BIAS External1";
+};
+
+&touchscreen {
+	interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_FALLING>;
+
+	vdd-supply = <&reg_touch_vdda>;
+
+	pinctrl-0 = <&ts_int_default>;
+	pinctrl-names = "default";
+};
+
+&tlmm {
+	battery_alert_default: battery-alert-default-state {
+		pins = "gpio49";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touch_vdda_default: touch-vdda-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts
new file mode 100644
index 000000000000..eecf78ba45bb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-motorola-common.dtsi"
+
+/ {
+	model = "Motorola Moto E 2015 LTE";
+	compatible = "motorola,surnia", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	battery@36 {
+		compatible = "maxim,max17050";
+		reg = <0x36>;
+
+		interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&battery_alert_default>;
+		pinctrl-names = "default";
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,cold-temp = <(-200)>;
+		maxim,dead-volt = <3200>;
+		maxim,over-volt = <4500>;
+
+	};
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias2-ext-cap;
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC3", "MIC BIAS External1";
+};
+
+&touchscreen {
+	interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_FALLING>;
+
+	vdd-supply = <&pm8916_l16>;
+
+	pinctrl-0 = <&ts_int_default>;
+	pinctrl-names = "default";
+};
+
+&tlmm {
+	battery_alert_default: battery-alert-default-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
index ac527a3a0826..63d476523544 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
-	compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916";
+	compatible = "qcom,msm8916-mtp", "qcom,msm8916";
 	chassis-type = "handset";
 
 	aliases {
@@ -23,5 +23,8 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 0b29132b74e1..6f75707b6f9b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -1,10 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -25,6 +28,12 @@
 		};
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		precharge-current-microamp = <450000>;
+		precharge-upper-limit-microvolt = <3500000>;
+	};
+
 	clk_pwm: pwm {
 		compatible = "clk-pwm";
 		#pwm-cells = <2>;
@@ -125,6 +134,12 @@
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&muic_int_default>;
+
+			usb_con: connector {
+				compatible = "usb-b-connector";
+				label = "micro-USB";
+				type = "micro";
+			};
 		};
 	};
 
@@ -196,6 +211,18 @@
 	};
 };
 
+&blsp_i2c1 {
+	status = "okay";
+
+	speaker_codec: audio-codec@34 {
+		compatible = "nxp,tfa9895";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l5>;
+		sound-name-prefix = "Speaker";
+		#sound-dai-cells = <0>;
+	};
+};
+
 &blsp_i2c2 {
 	status = "okay";
 
@@ -224,7 +251,7 @@
 &blsp_i2c4 {
 	status = "okay";
 
-	battery@35 {
+	fuel-gauge@35 {
 		compatible = "richtek,rt5033-battery";
 		reg = <0x35>;
 		interrupt-parent = <&tlmm>;
@@ -232,17 +259,77 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&fg_alert_default>;
+
+		power-supplies = <&charger>;
+	};
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	pmic@34 {
+		compatible = "richtek,rt5033";
+		reg = <0x34>;
+
+		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+
+		regulators {
+			rt5033_reg_safe_ldo: SAFE_LDO {
+				regulator-min-microvolt = <4900000>;
+				regulator-max-microvolt = <4900000>;
+				regulator-always-on;
+			};
+
+			/*
+			 * Needed for camera, but not used yet.
+			 * Define empty nodes to allow disabling the unused
+			 * regulators.
+			 */
+			LDO {};
+			BUCK {};
+		};
+
+		charger: charger {
+			compatible = "richtek,rt5033-charger";
+			monitored-battery = <&battery>;
+			richtek,usb-connector = <&usb_con>;
+		};
 	};
 };
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &gpu {
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
 &mdss {
 	status = "okay";
 };
@@ -253,6 +340,10 @@
 	pinctrl-1 = <&mdss_sleep>;
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -265,6 +356,13 @@
 	};
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -279,6 +377,32 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	model = "samsung-a2015";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	status = "okay";
 	extcon = <&muic>, <&muic>;
@@ -399,6 +523,13 @@
 		bias-disable;
 	};
 
+	pmic_int_default: pmic-int-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	sdc2_cd_default: sdc2-cd-default-state {
 		pins = "gpio38";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index f5a808369518..906d31f1ea21 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -49,17 +49,18 @@
 	};
 };
 
-&touchkey {
-	vcc-supply = <&reg_touch_key>;
-	vdd-supply = <&reg_key_led>;
-};
-
 &accelerometer {
 	mount-matrix = "0", "1", "0",
 		       "1", "0", "0",
 		       "0", "0", "1";
 };
 
+&battery {
+	charge-term-current-microamp = <150000>;
+	constant-charge-current-max-microamp = <1000000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -108,6 +109,11 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_key_led>;
+};
+
 &vibrator {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
index 391befa22bb4..fe39be7a742b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -29,6 +29,12 @@
 			"0", "0", "1";
 };
 
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1500000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
index 0824ab041d80..c50f81a68897 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
@@ -23,6 +23,12 @@
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&muic_int_default>;
+
+			usb_con: connector {
+				compatible = "usb-b-connector";
+				label = "micro-USB";
+				type = "micro";
+			};
 		};
 	};
 
@@ -65,6 +71,10 @@
 	};
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
 &reg_motor_vdd {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts
index fad2535255f7..800cb1038da0 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts
@@ -23,6 +23,12 @@
 	chassis-type = "handset";
 };
 
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1500000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts
index b412b61ca258..ec1debd2e245 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts
@@ -23,6 +23,13 @@
 	chassis-type = "handset";
 };
 
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1500000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
+
 &pm8916_l17 {
 	regulator-min-microvolt = <3000000>;
 	regulator-max-microvolt = <3000000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
new file mode 100644
index 000000000000..fb790b02736a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
@@ -0,0 +1,488 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85a00000 {
+			reg = <0x0 0x85a00000 0x0 0x600000>;
+			no-map;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		precharge-current-microamp = <450000>;
+		precharge-upper-limit-microvolt = <3500000>;
+	};
+
+	clk_pwm_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&clk_pwm 0 100000>;
+
+		enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <128>;
+
+		pinctrl-0 = <&backlight_en_default>;
+		pinctrl-names = "default";
+	};
+
+	clk_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+
+		clocks = <&gcc GCC_GP2_CLK>;
+
+		pinctrl-0 = <&backlight_pwm_default>;
+		pinctrl-names = "default";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-home {
+			label = "Home";
+			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	haptic {
+		compatible = "regulator-haptic";
+		haptic-supply = <&reg_motor_vdd>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+
+	i2c_nfc: i2c-nfc {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&nfc_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		s3fwrn5_nfc: nfc@27 {
+			compatible = "samsung,s3fwrn5-i2c";
+			reg = <0x27>;
+
+			interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>;
+
+			en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+			wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+			clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
+
+			pinctrl-0 = <&nfc_default>, <&nfc_clk_req>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+		};
+	};
+
+	reg_motor_vdd: regulator-motor-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_vdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&motor_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_vdd_tsp_a: regulator-vdd-tsp-a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp_a";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_en_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	muic: extcon@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+		interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&muic_int_default>;
+		pinctrl-names = "default";
+
+		usb_con: connector {
+			compatible = "usb-b-connector";
+			label = "micro-USB";
+			type = "micro";
+		};
+	};
+};
+
+&blsp_i2c2 {
+	/* Available sensors vary depending on model variant */
+	status = "okay";
+
+	bosch_accel: accelerometer@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l5>;
+		vddio-supply = <&pm8916_l5>;
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+
+		mount-matrix = "0", "-1", "0",
+			      "-1",  "0", "0",
+			       "0",  "0", "1";
+
+		status = "disabled";
+	};
+
+	bosch_magn: magnetometer@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
+
+		vdd-supply = <&pm8916_l5>;
+		vddio-supply = <&pm8916_l5>;
+
+		mount-matrix = "0", "-1", "0",
+			      "-1",  "0", "0",
+			       "0",  "0", "1";
+
+		status = "disabled";
+	};
+
+	st_accel: accelerometer@1d {
+		compatible = "st,lsm303c-accel";
+		reg = <0x1d>;
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_LEVEL_HIGH>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+
+		st,drdy-int-pin = <1>;
+		mount-matrix = "0", "-1",  "0",
+			       "1",  "0",  "0",
+			       "0",  "0", "-1";
+
+		status = "disabled";
+	};
+
+	st_magn: magnetometer@1e {
+		compatible = "st,lsm303c-magn";
+		reg = <0x1e>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+
+		mount-matrix = "0", "-1",  "0",
+			       "1",  "0",  "0",
+			       "0",  "0", "-1";
+
+		status = "disabled";
+	};
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	fuel-gauge@35 {
+		compatible = "richtek,rt5033-battery";
+		reg = <0x35>;
+
+		interrupts-extended = <&tlmm 121 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fg_alert_default>;
+		pinctrl-names = "default";
+
+		power-supplies = <&charger>;
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen: touchscreen@20 {
+		compatible = "zinitix,bt541";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <540>;
+		touchscreen-size-y = <960>;
+
+		vcca-supply = <&reg_vdd_tsp_a>;
+		vdd-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+
+		linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+	};
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	pmic@34 {
+		compatible = "richtek,rt5033";
+		reg = <0x34>;
+
+		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+
+		regulators {
+			rt5033_reg_safe_ldo: SAFE_LDO {
+				regulator-min-microvolt = <4900000>;
+				regulator-max-microvolt = <4900000>;
+				regulator-always-on;
+			};
+
+			/*
+			 * Needed for camera, but not used yet.
+			 * Define empty nodes to allow disabling the unused
+			 * regulators.
+			 */
+			LDO {};
+			BUCK {};
+		};
+
+		charger: charger {
+			compatible = "richtek,rt5033-charger";
+			monitored-battery = <&battery>;
+			richtek,usb-connector = <&usb_con>;
+		};
+	};
+};
+
+&blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&sound {
+	model = "msm8916-1mic";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_en_default: backlight-en-default-state {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_pwm_default: backlight-pwm-default-state {
+		pins = "gpio50";
+		function = "gcc_gp2_clk_a";
+	};
+
+	fg_alert_default: fg-alert-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	motor_en_default: motor-en-default-state {
+		pins = "gpio72";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_int_default: muic-int-default-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	nfc_default: nfc-default-state {
+		irq-pins {
+			pins = "gpio21";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		nfc-pins {
+			pins = "gpio20", "gpio49";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	nfc_i2c_default: nfc-i2c-default-state {
+		pins = "gpio0", "gpio1";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pmic_int_default: pmic-int-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default: tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_default: tsp-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&pm8916_gpios {
+	nfc_clk_req: nfc-clk-req-state {
+		pins = "gpio2";
+		function = "func1";
+		power-source = <PM8916_GPIO_L2>;
+		bias-disable;
+		input-enable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts
new file mode 100644
index 000000000000..677e4e286ac0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-fortuna-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Grand Prime (SM-G530W)";
+	compatible = "samsung,gprimeltecan", "qcom,msm8916";
+	chassis-type = "handset";
+
+	reserved-memory {
+		/* Firmware for gprimeltecan needs more space */
+		/delete-node/ tz-apps@85a00000;
+
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+};
+
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1000000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
+&bosch_accel {
+	status = "okay";
+};
+
+&bosch_magn {
+	status = "okay";
+};
+
+&blsp_i2c6 {
+	/* pmic@34 is on i2c_nfc instead */
+	/delete-node/ pmic@34;
+
+	nfc@27 {
+		compatible = "samsung,s3fwrn5-i2c";
+		reg = <0x27>;
+
+		interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>;
+
+		en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+		wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+		clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
+
+		pinctrl-0 = <&nfc_default>, <&nfc_clk_req>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c_nfc {
+	/* nfc@27 is on &blsp_i2c6 */
+
+	pmic@34 {
+		compatible = "richtek,rt5033";
+		reg = <0x34>;
+
+		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+
+		regulators {
+			rt5033_reg_safe_ldo: SAFE_LDO {
+				regulator-min-microvolt = <4900000>;
+				regulator-max-microvolt = <4900000>;
+				regulator-always-on;
+			};
+
+			/*
+			 * Needed for camera, but not used yet.
+			 * Define empty nodes to allow disabling the unused
+			 * regulators.
+			 */
+			LDO {};
+			BUCK {};
+		};
+
+		charger: charger {
+			compatible = "richtek,rt5033-charger";
+			monitored-battery = <&battery>;
+			richtek,usb-connector = <&usb_con>;
+		};
+	};
+};
+
+&mpss_mem {
+	/* Firmware for gprimeltecan needs more space */
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
index 3f145dde4059..5ddb69bf8e78 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
@@ -41,12 +41,44 @@
 	};
 };
 
+&battery {
+	charge-term-current-microamp = <150000>;
+	constant-charge-current-max-microamp = <1000000>;
+	constant-charge-voltage-max-microvolt = <4400000>;
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@50 {
+		compatible = "imagis,ist3038";
+		reg = <0x50>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		vdd-supply = <&reg_vdd_tsp_a>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&ts_int_default>;
+		pinctrl-names = "default";
+
+		linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+	};
+};
+
 &reg_motor_vdd {
 	gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>;
 };
 
 &reg_touch_key {
-	status = "disabled";
+	status = "disabled"; /* Using Imagis touch key */
+};
+
+&sound {
+	model = "samsung-gmax"; /* No secondary microphone */
 };
 
 &tlmm {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts
new file mode 100644
index 000000000000..582bfcb09684
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-fortuna-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Grand Prime (SM-G530FZ)";
+	compatible = "samsung,grandprimelte", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1000000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
+&bosch_accel {
+	status = "okay";
+};
+
+&bosch_magn {
+	status = "okay";
+};
+
+&mpss_mem {
+	/* Firmware for grandprimelte needs more space */
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
index c19cf20d7427..ff9679d3f664 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
@@ -3,9 +3,12 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -65,25 +68,6 @@
 	};
 };
 
-&blsp_i2c4 {
-	status = "okay";
-
-	fuelgauge@36 {
-		compatible = "maxim,max77849-battery";
-		reg = <0x36>;
-
-		maxim,rsns-microohm = <10000>;
-		maxim,over-heat-temp = <600>;
-		maxim,over-volt = <4400>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
-
-		pinctrl-0 = <&fuelgauge_int_default>;
-		pinctrl-names = "default";
-	};
-};
-
 &blsp_i2c2 {
 	status = "okay";
 
@@ -112,10 +96,55 @@
 	};
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77849-battery";
+		reg = <0x36>;
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,over-volt = <4400>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fuelgauge_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -133,6 +162,13 @@
 	status = "okay";
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -147,6 +183,27 @@
 	status = "okay";
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	dr_mode = "peripheral";
 	extcon = <&pm8916_usbin>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
index 75c4854ecd64..5b34529b816c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
@@ -9,6 +9,14 @@
 	compatible = "samsung,gt510", "qcom,msm8916";
 	chassis-type = "tablet";
 
+	speaker_codec: audio-codec {
+		compatible = "maxim,max98357a";
+		sdmode-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+		pinctrl-0 = <&audio_sdmode_default>;
+		pinctrl-names = "default";
+	};
+
 	clk_pwm: pwm {
 		compatible = "clk-pwm";
 		#pwm-cells = <2>;
@@ -112,6 +120,10 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -142,7 +154,21 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&sound {
+	model = "samsung-gt510";
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
 &tlmm {
+	audio_sdmode_default: audio-sdmode-default-state {
+		pins = "gpio55";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	buckbooster_en_default: buckbooster-en-default-state {
 		pins = "gpio51";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
index 11359bcc27b3..3d6d9dd3b8a8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
@@ -35,6 +35,26 @@
 		pinctrl-names = "default";
 	};
 
+	i2c-amplifier {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 55 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 56 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&amp_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		speaker_codec: audio-codec@34 {
+			compatible = "nxp,tfa9895";
+			reg = <0x34>;
+			vddd-supply = <&pm8916_l5>;
+			sound-name-prefix = "Speaker";
+			#sound-dai-cells = <0>;
+		};
+	};
+
 	vibrator {
 		compatible = "gpio-vibrator";
 		enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
@@ -55,6 +75,7 @@
 
 		touchscreen-size-x = <768>;
 		touchscreen-size-y = <1024>;
+		linux,keycodes = <KEY_APPSELECT KEY_BACK>;
 
 		vcca-supply = <&reg_vdd_tsp>;
 		vdd-supply = <&pm8916_l6>;
@@ -64,6 +85,10 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -94,7 +119,21 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&sound {
+	model = "samsung-a2015";
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &secondary_mic_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &secondary_mic_default>;
+	pinctrl-names = "default", "sleep";
+};
+
 &tlmm {
+	amp_i2c_default: amp-i2c-default-state {
+		pins = "gpio55", "gpio56";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	buckbooster_en_default: buckbooster-en-default-state {
 		pins = "gpio8";
 		function = "gpio";
@@ -123,6 +162,14 @@
 		bias-disable;
 	};
 
+	secondary_mic_default: secondary-mic-default-state {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
 	tsp_int_default: tsp-int-default-state {
 		pins = "gpio13";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j3-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j3-common.dtsi
new file mode 100644
index 000000000000..1d74cccc438a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j3-common.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-samsung-j5-common.dtsi"
+
+/ {
+	reserved-memory {
+		/delete-node/ tz-apps@85500000;
+
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85800000 {
+			reg = <0x0 0x85800000 0x0 0x800000>;
+			no-map;
+		};
+	};
+
+	reg_vdd_tsp_a: regulator-vdd-tsp-a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp_a";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_ldo_en_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&accelerometer {
+	vdd-supply = <&pm8916_l5>;
+	vddio-supply = <&pm8916_l5>;
+
+	mount-matrix = "0", "-1", "0",
+		       "1", "0", "0",
+		       "0", "0", "-1";
+};
+
+&gpio_hall_sensor {
+	status = "disabled";
+};
+
+&i2c_muic {
+	/* GPIO pins vary depending on model variant */
+};
+
+&i2c_sensors {
+	/* GPIO pins vary depending on model variant */
+};
+
+&touchscreen {
+	vdd-supply = <&reg_vdd_tsp_a>;
+};
+
+&tlmm {
+	tsp_ldo_en_default: tsp-ldo-en-default-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j3ltetw.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j3ltetw.dts
new file mode 100644
index 000000000000..a26d2fd13c94
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j3ltetw.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-j3-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy J3 (2016) (SM-J320YZ)";
+	compatible = "samsung,j3ltetw", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&i2c_muic {
+	sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+};
+
+&i2c_sensors {
+	/* I2C2 */
+	sda-gpios = <&tlmm 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&tlmm 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+};
+
+&muic_i2c_default {
+	pins = "gpio0", "gpio1";
+};
+
+&sensors_i2c_default {
+	/* I2C2 */
+	pins = "gpio6", "gpio7";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
index fe59be3505fe..697f25d51d9d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -133,6 +135,13 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5800000>;
 };
 
 &pm8916_resin {
@@ -154,6 +163,14 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	model = "msm8916-1mic";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	extcon = <&muic>, <&muic>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
index 58c2f5a70e78..ba8650971d6a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
@@ -19,6 +19,10 @@
 	status = "disabled";
 };
 
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+};
+
 &touchscreen {
 	/* FIXME: Missing sm5703-mfd driver to power up vdd-supply */
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi
new file mode 100644
index 000000000000..e7f265e3c2ab
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-samsung-fortuna-common.dtsi"
+
+/* SM5504 MUIC instead of SM5502 */
+/delete-node/ &muic;
+
+/* Touchscreen varies depending on model variant */
+/delete-node/ &touchscreen;
+
+&blsp_i2c1 {
+	muic: extcon@14 {
+		compatible = "siliconmitus,sm5504-muic";
+		reg = <0x14>;
+		interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&muic_int_default>;
+		pinctrl-names = "default";
+
+		usb_con: connector {
+			compatible = "usb-b-connector";
+			label = "micro-USB";
+			type = "micro";
+		};
+	};
+};
+
+/* On rossa backlight is controlled with MIPI DCS commands */
+&clk_pwm {
+	status = "disabled";
+};
+
+&clk_pwm_backlight {
+	status = "disabled";
+};
+
+&s3fwrn5_nfc {
+	status = "okay";
+};
+
+&st_accel {
+	compatible = "st,lis2hh12";
+	mount-matrix = "1",  "0", "0",
+		       "0", "-1", "0",
+		       "0",  "0", "1";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts
new file mode 100644
index 000000000000..3413b0970c4a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-rossa-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Core Prime LTE";
+	compatible = "samsung,rossa", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&battery {
+	charge-term-current-microamp = <150000>;
+	constant-charge-current-max-microamp = <700000>;
+	constant-charge-voltage-max-microvolt = <4400000>;
+};
+
+&blsp_i2c5 {
+	touchscreen@50 {
+		compatible = "imagis,ist3038";
+		reg = <0x50>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+
+		vdd-supply = <&reg_vdd_tsp_a>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+
+		linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+	};
+};
+
+&mpss_mem {
+	/* Firmware for rossa needs more space */
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index 68da2a2d3077..71b5c98458ff 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -317,6 +319,48 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mdss_default>;
+	pinctrl-1 = <&mdss_sleep>;
+
+	panel@0 {
+		compatible = "samsung,s6e88a0-ams427ap24";
+		reg = <0>;
+
+		vdd3-supply = <&pm8916_l17>;
+		vci-supply = <&pm8916_l6>;
+		reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+		flip-horizontal;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5a00000>;
 };
 
 &pm8916_resin {
@@ -324,6 +368,13 @@
 	linux,code = <KEY_VOLUMEDOWN>;
 };
 
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
 &pm8916_vib {
 	status = "okay";
 };
@@ -350,6 +401,13 @@
 	no-1-8-v;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	status = "okay";
 	extcon = <&muic>, <&muic>;
@@ -412,6 +470,22 @@
 		bias-disable;
 	};
 
+	mdss_default: mdss-default-state {
+		pins = "gpio25";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_sleep: mdss-sleep-state {
+		pins = "gpio25";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	muic_i2c_default: muic-i2c-default-state {
 		pins = "gpio105", "gpio106";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
index 6fe1850ba20e..f34997500891 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 };
 
-&led_r {
-	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
 };
 
 &button_default {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
index 16d4a91022be..6cb3911ba1c9 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 };
 
-&led_r {
-	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
 };
 
 &mpss {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
index c77ed04bb6c3..5719933fa8e0 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
@@ -72,6 +72,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518.dts
new file mode 100644
index 000000000000..d6b03e08c34a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-wingtech-wt865x8.dtsi"
+
+/ {
+	model = "Lenovo A6000 (Wingtech WT86518)";
+	compatible = "wingtech,wt86518", "qcom,msm8916";
+	chassis-type = "handset";
+
+	speaker_amp: audio-amplifier {
+		compatible = "awinic,aw8738";
+
+		pinctrl-0 = <&spk_ext_pa_default>;
+		pinctrl-names = "default";
+
+		mode-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amp";
+		awinic,mode = <1>;
+	};
+};
+
+&blsp_i2c2 {
+	accelerometer@e {
+		compatible = "kionix,kxcj91008";
+		reg = <0xe>;
+
+		vdd-supply = <&pm8916_l6>;
+		vddio-supply = <&pm8916_l6>;
+
+		mount-matrix = "0", "-1", "0",
+			       "-1", "0", "0",
+			       "0",  "0", "1";
+	};
+};
+
+&headphones_switch {
+	VCC-supply = <&pm8916_l17>;
+};
+
+&pm8916_bms {
+	power-supplies = <&pm8916_charger>;
+};
+
+&pm8916_charger {
+	qcom,fast-charge-safe-current = <900000>;
+	qcom,fast-charge-safe-voltage = <4300000>;
+
+	monitored-battery = <&battery>;
+
+	status = "okay";
+};
+
+&sound {
+	model = "wt88047";
+	widgets = "Speaker", "Speaker",
+		  "Headphone", "Headphones";
+	pin-switches = "Speaker", "Headphones";
+	audio-routing = "Speaker", "Speaker Amp OUT",
+			"Speaker Amp IN", "HPH_R",
+			"Headphones", "Headphones Switch OUTL",
+			"Headphones", "Headphones Switch OUTR",
+			"Headphones Switch INL", "HPH_L",
+			"Headphones Switch INR", "HPH_R",
+			"AMIC1", "MIC BIAS Internal1",
+			"AMIC2", "MIC BIAS Internal2";
+	aux-devs = <&speaker_amp>, <&headphones_switch>;
+};
+
+&usb {
+	dr_mode = "peripheral";
+	extcon = <&pm8916_charger>;
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_charger>;
+};
+
+&tlmm {
+	spk_ext_pa_default: spk-ext-pa-default-state {
+		pins = "gpio119";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528.dts
new file mode 100644
index 000000000000..ec2c4dcd3ead
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-wingtech-wt865x8.dtsi"
+
+/ {
+	model = "Lenovo A6010 (Wingtech WT86528)";
+	compatible = "wingtech,wt86528", "qcom,msm8916";
+	chassis-type = "handset";
+
+	/* left AW8736 */
+	speaker_amp_left: audio-amplifier-left {
+		compatible = "awinic,aw8738";
+
+		pinctrl-0 = <&spk_ext_pa_left_default>;
+		pinctrl-names = "default";
+
+		mode-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amp L";
+		awinic,mode = <3>;
+	};
+
+	/* right AW8736 */
+	speaker_amp_right: audio-amplifier-right {
+		compatible = "awinic,aw8738";
+
+		pinctrl-0 = <&spk_ext_pa_right_default>;
+		pinctrl-names = "default";
+
+		mode-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amp R";
+		awinic,mode = <3>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			gpios = <&tlmm 16 GPIO_ACTIVE_LOW>;
+			label = "red";
+			default-state = "off";
+			retain-state-suspended;
+		};
+
+		led-1 {
+			gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+			label = "green";
+			default-state = "off";
+			retain-state-suspended;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	magnetometer@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+
+		vdd-supply = <&pm8916_l17>;
+		vid-supply = <&pm8916_l6>;
+	};
+
+	imu@68 {
+		compatible = "invensense,mpu6880";
+		reg = <0x68>;
+
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&imu_default>;
+		pinctrl-names = "default";
+
+		mount-matrix = "1",  "0", "0",
+			       "0", "-1", "0",
+			       "0",  "0", "1";
+	};
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+};
+
+&sound {
+	model = "wt86528";
+	widgets = "Speaker", "Speaker",
+		  "Headphone", "Headphones";
+	pin-switches = "Speaker", "Headphones";
+	audio-routing = "Speaker", "Speaker Amp L OUT",
+			"Speaker", "Speaker Amp R OUT",
+			"Speaker Amp L IN", "HPH_L",
+			"Speaker Amp R IN", "HPH_R",
+			"Headphones", "Headphones Switch OUTL",
+			"Headphones", "Headphones Switch OUTR",
+			"Headphones Switch INL", "HPH_L",
+			"Headphones Switch INR", "HPH_R",
+			"AMIC1", "MIC BIAS External1",
+			"AMIC2", "MIC BIAS Internal2",
+			"AMIC3", "MIC BIAS External1";
+	aux-devs = <&speaker_amp_left>, <&speaker_amp_right>, <&headphones_switch>;
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&tlmm {
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio16", "gpio17";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	imu_default: imu-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	spk_ext_pa_left_default: spk-ext-pa-left-default-state {
+		pins = "gpio119";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	spk_ext_pa_right_default: spk-ext-pa-right-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi
new file mode 100644
index 000000000000..ebe85cd85ddf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	headphones_switch: audio-switch {
+		compatible = "simple-audio-amplifier";
+
+		pinctrl-0 = <&headphones_switch_default>;
+		pinctrl-names = "default";
+
+		enable-gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Headphones Switch";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pm8916_pwm 0 100000>;
+
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <255>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+		energy-full-design-microwatt-hours = <8740000>;
+		charge-full-design-microamp-hours = <2300000>;
+
+		ocv-capacity-celsius = <25>;
+		ocv-capacity-table-0 = <4328000 100>, <4266000 95>, <4208000 90>,
+			<4154000 85>, <4102000 80>, <4062000 75>, <3992000 70>,
+			<3960000 65>, <3914000 60>, <3870000 55>, <3840000 50>,
+			<3818000 45>, <3800000 40>, <3784000 35>, <3770000 30>,
+			<3756000 25>, <3736000 20>, <3714000 16>, <3696000 13>,
+			<3690000 11>, <3689000 10>, <3688000 9>, <3686000 8>,
+			<3682000 7>, <3670000 6>, <3639000 5>, <3592000 4>,
+			<3530000 3>, <3448000 2>, <3320000 1>, <3000000 0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		volume-up-button {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+		vcc-supply = <&pm8916_l17>;
+		iovcc-supply = <&pm8916_l6>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_bms {
+	monitored-battery = <&battery>;
+	status = "okay";
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_pwm {
+	pinctrl-0 = <&pwm_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default>;
+	pinctrl-1 = <&sdc2_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	non-removable;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	headphones_switch_default: headphones-switch-default-state {
+		pins = "gpio120";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
+
+&pm8916_mpps {
+	pwm_out: mpp4-state {
+		pins = "mpp4";
+		function = "digital";
+		power-source = <PM8916_MPP_VPH>;
+		output-low;
+		qcom,dtest = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index 419f35c1fc92..68c8856d4c2e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -25,6 +27,28 @@
 		stdout-path = "serial0";
 	};
 
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amp";
+		pinctrl-0 = <&speaker_amp_default>;
+		pinctrl-names = "default";
+	};
+
+	/*
+	 * This seems to be actually an analog switch that either routes audio
+	 * to the headphone jack or nowhere. Given that we need to enable a GPIO
+	 * to get sound on headphones, modelling it as simple-audio-amplifier
+	 * works just fine.
+	 */
+	headphones_switch: audio-switch {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Headphones Switch";
+		pinctrl-0 = <&headphones_switch_default>;
+		pinctrl-names = "default";
+	};
+
 	flash-led-controller {
 		compatible = "ocs,ocp8110";
 		enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
@@ -118,6 +142,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l16>;
+		vio-supply = <&pm8916_l5>;
 
 		led@0 {
 			reg = <0>;
@@ -144,6 +169,21 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5100000>;
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
 };
 
 &pm8916_resin {
@@ -180,6 +220,30 @@
 	non-removable;
 };
 
+&sound {
+	/*
+	 * Provide widgets/pin-switches to allow enabling speaker and headphones
+	 * separately. Both are routed via the HPH_L/HPH_R pins of the codec.
+	 */
+	model = "wt88047";
+	widgets =
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+	pin-switches = "Speaker", "Headphones";
+	audio-routing =
+		"Speaker", "Speaker Amp OUTL",
+		"Speaker", "Speaker Amp OUTR",
+		"Speaker Amp INL", "HPH_R",
+		"Speaker Amp INR", "HPH_R",
+		"Headphones", "Headphones Switch OUTL",
+		"Headphones", "Headphones Switch OUTR",
+		"Headphones Switch INL", "HPH_L",
+		"Headphones Switch INR", "HPH_R",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2";
+	aux-devs = <&speaker_amp>, <&headphones_switch>;
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -226,6 +290,13 @@
 		bias-pull-up;
 	};
 
+	headphones_switch_default: headphones-switch-default-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	imu_default: imu-default-state {
 		pins = "gpio115";
 		function = "gpio";
@@ -234,6 +305,13 @@
 		bias-disable;
 	};
 
+	speaker_amp_default: speaker-amp-default-state {
+		pins = "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	touchscreen_default: touchscreen-default-state {
 		touchscreen-pins {
 			pins = "gpio13";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
index 5e6ba8c58bb5..a98efcfe78b7 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
 };
 
-&led_r {
-	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
 };
 
 &button_default {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 4f799b536a92..d3a25a837488 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -4,12 +4,14 @@
  */
 
 #include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/interconnect/qcom,msm8916.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -124,7 +126,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};
 
@@ -132,67 +134,67 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			enable-method = "psci";
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			qcom,acc = <&cpu0_acc>;
 			qcom,saw = <&cpu0_saw>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			enable-method = "psci";
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			qcom,acc = <&cpu1_acc>;
 			qcom,saw = <&cpu1_saw>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			enable-method = "psci";
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			qcom,acc = <&cpu2_acc>;
 			qcom,saw = <&cpu2_saw>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			enable-method = "psci";
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			qcom,acc = <&cpu3_acc>;
 			qcom,saw = <&cpu3_saw>;
 		};
 
-		L2_0: l2-cache {
+		l2_0: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
@@ -201,7 +203,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			CPU_SLEEP_0: cpu-sleep-0 {
+			cpu_sleep_0: cpu-sleep-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "standalone-power-collapse";
 				arm,psci-suspend-param = <0x40000002>;
@@ -214,7 +216,7 @@
 
 		domain-idle-states {
 
-			CLUSTER_RET: cluster-retention {
+			cluster_ret: cluster-retention {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000012>;
 				entry-latency-us = <500>;
@@ -222,7 +224,7 @@
 				min-residency-us = <2000>;
 			};
 
-			CLUSTER_PWRDN: cluster-gdhs {
+			cluster_pwrdn: cluster-gdhs {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000032>;
 				entry-latency-us = <2000>;
@@ -272,33 +274,33 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
 		};
 
-		CLUSTER_PD: power-domain-cluster {
+		cluster_pd: power-domain-cluster {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
+			domain-idle-states = <&cluster_ret>, <&cluster_pwrdn>;
 		};
 	};
 
@@ -307,11 +309,11 @@
 
 		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
+			mboxes = <&apcs 0>;
 			qcom,smd-edge = <15>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8916";
+				compatible = "qcom,rpm-msm8916", "qcom,smd-rpm";
 				qcom,smd-channels = "rpm_requests";
 
 				rpmcc: clock-controller {
@@ -359,7 +361,7 @@
 
 		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 14>;
+		mboxes = <&apcs 14>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <1>;
@@ -384,7 +386,7 @@
 
 		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 18>;
+		mboxes = <&apcs 18>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <4>;
@@ -409,8 +411,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		qcom,ipc-1 = <&apcs 8 13>;
-		qcom,ipc-3 = <&apcs 8 19>;
+		mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>;
 
 		apps_smsm: apps@0 {
 			reg = <0>;
@@ -539,9 +540,6 @@
 			compatible = "qcom,msm8916-bimc";
 			reg = <0x00400000 0x62000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -574,18 +572,12 @@
 			compatible = "qcom,msm8916-pcnoc";
 			reg = <0x00500000 0x11000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8916-snoc";
 			reg = <0x00580000 0x14000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		stm: stm@802000 {
@@ -832,7 +824,7 @@
 			reg = <0x00850000 0x1000>;
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 			status = "disabled";
 		};
 
@@ -841,7 +833,7 @@
 			reg = <0x00852000 0x1000>;
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 			status = "disabled";
 		};
 
@@ -850,7 +842,7 @@
 			reg = <0x00854000 0x1000>;
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 			status = "disabled";
 		};
 
@@ -859,7 +851,7 @@
 			reg = <0x00856000 0x1000>;
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 			status = "disabled";
 		};
 
@@ -873,7 +865,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 			arm,cs-dev-assoc = <&etm0>;
 
 			status = "disabled";
@@ -888,7 +880,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 			arm,cs-dev-assoc = <&etm1>;
 
 			status = "disabled";
@@ -903,7 +895,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 			arm,cs-dev-assoc = <&etm2>;
 
 			status = "disabled";
@@ -918,7 +910,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 			arm,cs-dev-assoc = <&etm3>;
 
 			status = "disabled";
@@ -932,7 +924,7 @@
 			clock-names = "apb_pclk", "atclk";
 			arm,coresight-loses-context-with-cpu;
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 
 			status = "disabled";
 
@@ -953,7 +945,7 @@
 			clock-names = "apb_pclk", "atclk";
 			arm,coresight-loses-context-with-cpu;
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 
 			status = "disabled";
 
@@ -974,7 +966,7 @@
 			clock-names = "apb_pclk", "atclk";
 			arm,coresight-loses-context-with-cpu;
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 
 			status = "disabled";
 
@@ -995,7 +987,7 @@
 			clock-names = "apb_pclk", "atclk";
 			arm,coresight-loses-context-with-cpu;
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 
 			status = "disabled";
 
@@ -1240,29 +1232,50 @@
 				bias-pull-down;
 			};
 
-			blsp_uart1_default: blsp-uart1-default-state {
-				/* TX, RX, CTS_N, RTS_N */
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
-				function = "blsp_uart1";
-				drive-strength = <16>;
-				bias-disable;
+			blsp_uart1_console_default: blsp-uart1-console-default-state {
+				tx-pins {
+					pins = "gpio0";
+					function = "blsp_uart1";
+					drive-strength = <16>;
+					bias-disable;
+					bootph-all;
+				};
+
+				rx-pins {
+					pins = "gpio1";
+					function = "blsp_uart1";
+					drive-strength = <16>;
+					bias-pull-up;
+					bootph-all;
+				};
 			};
 
-			blsp_uart1_sleep: blsp-uart1-sleep-state {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			blsp_uart1_console_sleep: blsp-uart1-console-sleep-state {
+				pins = "gpio0", "gpio1";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp_uart2_default: blsp-uart2-default-state {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart2";
-				drive-strength = <16>;
-				bias-disable;
+			blsp_uart2_console_default: blsp-uart2-console-default-state {
+				tx-pins {
+					pins = "gpio4";
+					function = "blsp_uart2";
+					drive-strength = <16>;
+					bias-disable;
+					bootph-all;
+				};
+
+				rx-pins {
+					pins = "gpio5";
+					function = "blsp_uart2";
+					drive-strength = <16>;
+					bias-pull-up;
+					bootph-all;
+				};
 			};
 
-			blsp_uart2_sleep: blsp-uart2-sleep-state {
+			blsp_uart2_console_sleep: blsp-uart2-console-sleep-state {
 				pins = "gpio4", "gpio5";
 				function = "gpio";
 				drive-strength = <2>;
@@ -1506,8 +1519,8 @@
 			reg = <0x01800000 0x80000>;
 			clocks = <&xo_board>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
 				 <0>,
 				 <0>,
 				 <0>;
@@ -1549,6 +1562,8 @@
 
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 
+			resets = <&gcc GCC_MDSS_BCR>;
+
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
@@ -1599,8 +1614,8 @@
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_AHB_CLK>,
@@ -1793,6 +1808,8 @@
 			power-domains = <&gcc OXILI_GDSC>;
 			operating-points-v2 = <&gpu_opp_table>;
 			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+			#cooling-cells = <2>;
+
 			status = "disabled";
 
 			gpu_opp_table: opp-table {
@@ -1819,14 +1836,6 @@
 			iommus = <&apps_iommu 5>;
 			memory-region = <&venus_mem>;
 			status = "disabled";
-
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
 		};
 
 		apps_iommu: iommu@1ef0000 {
@@ -1984,11 +1993,59 @@
 				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
 
 				qcom,smd-edge = <0>;
-				qcom,ipc = <&apcs 8 12>;
+				mboxes = <&apcs 12>;
 				qcom,remote-pid = <1>;
 
 				label = "hexagon";
 
+				apr: apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					q6core: service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
 				fastrpc {
 					compatible = "qcom,fastrpc";
 					qcom,smd-channels = "fastrpcsmd-apps-dsp";
@@ -2070,6 +2127,7 @@
 				 <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
 			pinctrl-0 = <&sdc1_default>;
 			pinctrl-1 = <&sdc1_sleep>;
 			pinctrl-names = "default", "sleep";
@@ -2091,6 +2149,7 @@
 				 <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
 			pinctrl-0 = <&sdc2_default>;
 			pinctrl-1 = <&sdc2_sleep>;
 			pinctrl-names = "default", "sleep";
@@ -2106,6 +2165,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {
@@ -2116,9 +2176,6 @@
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
 			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_uart1_default>;
-			pinctrl-1 = <&blsp_uart1_sleep>;
 			status = "disabled";
 		};
 
@@ -2130,9 +2187,6 @@
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
 			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_uart2_default>;
-			pinctrl-1 = <&blsp_uart2_sleep>;
 			status = "disabled";
 		};
 
@@ -2416,7 +2470,7 @@
 			smd-edge {
 				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
 
-				qcom,ipc = <&apcs 8 17>;
+				mboxes = <&apcs 17>;
 				qcom,smd-edge = <6>;
 				qcom,remote-pid = <4>;
 
@@ -2583,7 +2637,6 @@
 	thermal-zones {
 		cpu0-1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -2603,17 +2656,16 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu0_1_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu2-3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 4>;
 
@@ -2633,20 +2685,26 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu2_3_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		gpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 2>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				gpu_alert0: trip-point0 {
 					temperature = <75000>;
@@ -2663,7 +2721,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 1>;
 
@@ -2678,7 +2735,6 @@
 
 		modem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 0>;
 
diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
new file mode 100644
index 000000000000..9db503e21888
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023, Barnabas Czeman
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "msm8917.dtsi"
+#include "pm8937.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Xiaomi Redmi 5A (riva)";
+	compatible = "xiaomi,riva", "qcom,msm8917";
+	chassis-type = "handset";
+
+	qcom,msm-id = <QCOM_ID_MSM8917 0>;
+	qcom,board-id = <0x1000b 2>, <0x2000b 2>;
+
+	pwm_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pm8937_pwm 0 100000>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <128>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3000000>;
+		energy-full-design-microwatt-hours = <11500000>;
+		constant-charge-current-max-microamp = <1000000>;
+		constant-charge-voltage-max-microvolt = <4400000>;
+		precharge-current-microamp = <256000>;
+		charge-term-current-microamp = <60000>;
+		voltage-min-design-microvolt = <3400000>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+			power-domains = <&gcc MDSS_GDSC>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		key-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		framebuffer_mem: memory@90001000 {
+			reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+		interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&tsp_int_rst_default>;
+		pinctrl-names = "default";
+		vcc-supply = <&pm8937_l10>;
+		iovcc-supply = <&pm8937_l5>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+	};
+};
+
+&blsp2_i2c1 {
+	status = "okay";
+
+	bq27426@55 {
+		compatible = "ti,bq27426";
+		reg = <0x55>;
+		monitored-battery = <&battery>;
+	};
+
+	bq25601@6b {
+		compatible = "ti,bq25601";
+		reg = <0x6b>;
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&bq25601_int_default>;
+		pinctrl-names = "default";
+		input-voltage-limit-microvolt = <4400000>;
+		input-current-limit-microamp = <1000000>;
+		monitored-battery = <&battery>;
+	};
+};
+
+&pm8937_gpios {
+	pwm_enable_default: pwm-enable-default-state {
+		pins = "gpio8";
+		function = "dtest2";
+		output-low;
+		bias-disable;
+		qcom,drive-strength = <2>;
+	};
+};
+
+&pm8937_pwm {
+	pinctrl-0 = <&pwm_enable_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pm8937_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8937-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+
+		vdd_l1_l19-supply = <&pm8937_s3>;
+		vdd_l2_l23-supply = <&pm8937_s3>;
+		vdd_l3-supply = <&pm8937_s3>;
+		vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>;
+		vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+		vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>;
+
+		pm8937_s1: s1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8937_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8937_s4: s4 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8937_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8937_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l8: l8 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8937_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8937_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		pm8937_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8937_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8937_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l17: l17 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8937_l19: l19 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8937_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8937_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8937_l8>;
+	vqmmc-supply = <&pm8937_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&pm8937_l11>;
+	vqmmc-supply = <&pm8937_l12>;
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32768>;
+};
+
+&tlmm {
+	bq25601_int_default: bq25601-int-default-state {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default: tsp-int-rst-default-state {
+		pins = "gpio64", "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&wcnss {
+	vddpx-supply = <&pm8937_l5>;
+
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+	vddxo-supply = <&pm8937_l7>;
+	vddrfa-supply = <&pm8937_l19>;
+	vddpa-supply = <&pm8937_l9>;
+	vdddig-supply = <&pm8937_l5>;
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8917.dtsi b/arch/arm64/boot/dts/qcom/msm8917.dtsi
new file mode 100644
index 000000000000..8a642fce2e40
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8917.dtsi
@@ -0,0 +1,1955 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
+#include <dt-bindings/clock/qcom,gcc-msm8917.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		cpu1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+		};
+
+		cpu2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+		};
+
+		cpu3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		domain-idle-states {
+			cluster_sleep_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000053>;
+				entry-latency-us = <700>;
+				exit-latency-us = <1000>;
+				min-residency-us = <6500>;
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "standalone-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <125>;
+				exit-latency-us = <180>;
+				min-residency-us = <595>;
+				local-timer-stop;
+			};
+		};
+
+		cpu_opp_table: opp-table-cpu {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-960000000 {
+				opp-hz = /bits/ 64 <960000000>;
+			};
+
+			opp-1094400000 {
+				opp-hz = /bits/ 64 <1094400000>;
+			};
+
+			opp-1248000000 {
+				opp-hz = /bits/ 64 <1248000000>;
+			};
+
+			opp-1401600000 {
+				opp-hz = /bits/ 64 <1401600000>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8916", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@80000000 {
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+		device_type = "memory";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cluster_pd: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_0>;
+		};
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8917-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8917", "qcom,smd-rpm";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8917", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8917-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		qseecom_mem: qseecom@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		reserved@86400000 {
+			reg = <0x0 0x86400000 0x0 0x400000>;
+			no-map;
+		};
+
+		rmtfs@92100000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x92100000 0x0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		adsp_mem: adsp {
+			size = <0x0 0x1100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		mba_mem: mba {
+			size = <0x0 0x100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		venus_mem: venus {
+			size = <0x0 0x400000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		wcnss_mem: wcnss {
+			size = <0x0 0x700000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0xffffffff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		usb_hs_phy: phy@6c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0006c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&xo_board>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc GCC_QUSB2_PHY_BCR>,
+				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,msm8917-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@1d8 {
+				reg = <0x1d8 1>;
+				bits = <0 8>;
+			};
+
+			tsens_s5_p1: s5-p1@1d9 {
+				reg = <0x1d9 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p2: s5-p2@1d9 {
+				reg = <0x1d9 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@1da {
+				reg = <0x1da 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s6_p2: s6-p2@1db {
+				reg = <0x1db 1>;
+				bits = <2 6>;
+			};
+
+			tsens_s7_p1: s7-p1@1dc {
+				reg = <0x1dc 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@1dc {
+				reg = <0x1dc 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p1: s8-p1@1dd {
+				reg = <0x1dd 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s8_p2: s8-p2@1de {
+				reg = <0x1de 1>;
+				bits = <2 6>;
+			};
+
+			tsens_base2: base2@1df {
+				reg = <0x1df 1>;
+				bits = <0 8>;
+			};
+
+			tsens_mode: mode@210 {
+				reg = <0x210 1>;
+				bits = <0 3>;
+			};
+
+			tsens_s0_p1: s0-p1@210 {
+				reg = <0x210 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s0_p2: s0-p2@211 {
+				reg = <0x211 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@211 {
+				reg = <0x211 2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@212 {
+				reg = <0x212 2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@213 {
+				reg = <0x213 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@214 {
+				reg = <0x214 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@214 {
+				reg = <0x214 2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@215 {
+				reg = <0x215 2>;
+				bits = <5 6>;
+			};
+
+			tsens_s4_p1: s4-p1@216 {
+				reg = <0x216 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s4_p2: s4-p2@217 {
+				reg = <0x217 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s9_p1: s9-p1@230 {
+				reg = <0x230 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p2: s9-p2@230 {
+				reg = <0x230 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s10_p1: s10-p1@231 {
+				reg = <0x231 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s10_p2: s10-p2@232 {
+				reg = <0x232 1>;
+				bits = <2 6>;
+			};
+		};
+
+		rng@e3000 {
+			compatible = "qcom,prng";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8937-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2";
+			#qcom,sensors = <11>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8917-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 134>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_default: blsp2-i2c1-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_spi3_default: blsp1-spi3-default-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "blsp_spi3";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			blsp1_spi3_sleep: blsp1-spi3-sleep-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp2_spi2_default: blsp2-spi2-default-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			blsp2_spi2_sleep: blsp2-spi2-sleep-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp1_uart1_default: blsp1-uart1-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart1_sleep: blsp1-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			wcnss_pin_a: wcnss-active-state {
+				wcss-wlan-pins {
+					pins = "gpio79", "gpio80";
+					function = "wcss_wlan";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan0-pins {
+					pins = "gpio78";
+					function = "wcss_wlan0";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan1-pins {
+					pins = "gpio77";
+					function = "wcss_wlan1";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan2-pins {
+					pins = "gpio76";
+					function = "wcss_wlan2";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8917";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "dsi0pll",
+				      "dsi0pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8917", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x1040>;
+			reg-names = "mdss_phys", "vbif_phys";
+			ranges;
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8917-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				power-domains = <&gcc MDSS_GDSC>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 0x15>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x01a94000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi0_phy>;
+
+				operating-points-v2 = <&mdss_dsi0_opp_table>;
+				power-domains = <&rpmpd MSM8917_VDDCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a94a00 {
+				compatible = "qcom,dsi-phy-28nm-8937";
+				reg = <0x01a94a00 0xd4>,
+				      <0x01a94400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&xo_board>;
+				clock-names = "iface", "ref";
+			};
+		};
+
+		apps_iommu: iommu@1e20000 {
+			compatible = "qcom,msm8917-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01e20000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			/* VFE */
+			iommu-ctx@14000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x14000 0x1000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x15000 0x1000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x16000 0x1000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			compatible = "qcom,msm8917-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01f08000 0x10000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <18>;
+
+			iommu-ctx@0 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0 0x1000>;
+				interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-306.32", "qcom,adreno";
+			reg = <0x01c00000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "gfx3d";
+			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
+				 <&gcc GCC_OXILI_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_BIMC_GPU_CLK>,
+				 <&gcc GFX3D_CLK_SRC>;
+			power-domains = <&gcc OXILI_GX_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>;
+
+			iommus = <&gpu_iommu 0>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+				};
+
+				opp-270000000 {
+					opp-hz = /bits/ 64 <270000000>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+				};
+
+				opp-484800000 {
+					opp-hz = /bits/ 64 <484800000>;
+				};
+
+				opp-523200000 {
+					opp-hz = /bits/ 64 <523200000>;
+				};
+
+				opp-598000000 {
+					opp-hz = /bits/ 64 <598000000>;
+				};
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x500>,
+			      <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default", "sleep";
+			power-domains = <&rpmpd MSM8917_VDDCX>;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x500>,
+			      <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc2_default>;
+			pinctrl-1 = <&sdc2_sleep>;
+			pinctrl-names = "default", "sleep";
+			power-domains = <&rpmpd MSM8917_VDDCX>;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <12>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1d000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <10>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_spi3_default>;
+			pinctrl-1 = <&blsp1_spi3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			pinctrl-1 = <&blsp1_i2c4_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c1: i2c@7af5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi2: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp2_spi2_default>;
+			pinctrl-1 = <&blsp2_spi2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@78db000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078db000 0x200>,
+			      <0x078db200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>,
+			      <0x0a202000 0x1000>,
+			      <0x0a21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8917_VDDCX>,
+					<&rpmpd MSM8917_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-0 = <&wcnss_pin_a>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,
+			      <0x0b002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+			clocks = <&a53pll>, <&gcc GPLL0_EARLY>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "pll", "aux", "ref";
+			#clock-cells = <0>;
+		};
+
+		a53pll: clock@b016000 {
+			compatible = "qcom,msm8939-a53pll";
+			reg = <0x0b016000 0x40>;
+			clocks = <&xo_board>;
+			clock-names = "xo";
+			#clock-cells = <0>;
+			operating-points-v2 = <&pll_opp_table>;
+
+			pll_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-960000000 {
+					opp-hz = /bits/ 64 <960000000>;
+				};
+
+				opp-1094400000 {
+					opp-hz = /bits/ 64 <1094400000>;
+				};
+
+				opp-1248000000 {
+					opp-hz = /bits/ 64 <1248000000>;
+				};
+
+				opp-1401600000 {
+					opp-hz = /bits/ 64 <1401600000>;
+				};
+			};
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@b121000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	thermal_zones: thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 4>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpuss1_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss1_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss1_crit: cpuss1-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 5>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 6>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 7>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 8>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 9>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu_alert: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+		};
+
+		mdm-core-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				mdm_core_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				q6_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8929-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8929-pm8916.dtsi
new file mode 100644
index 000000000000..c2bf25997e9b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8929-pm8916.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * msm8929-pm8916.dtsi describes common properties (e.g. regulator connections)
+ * that apply to most devices that make use of the MSM8929 SoC and PM8916 PMIC.
+ * Many regulators have a fixed purpose in the original reference design and
+ * were rarely re-used for different purposes. Devices that deviate from the
+ * typical reference design should not make use of this include and instead add
+ * the necessary properties in the board-specific device tree.
+ */
+
+#include "msm8929.dtsi"
+#include "pm8916.dtsi"
+
+&mdss_dsi0 {
+	vdda-supply = <&pm8916_l2>;
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi0_phy {
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&pm8916_l2>;
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi1_phy {
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mpss {
+	pll-supply = <&pm8916_l7>;
+};
+
+&pm8916_codec {
+	vdd-cdc-io-supply = <&pm8916_l5>;
+	vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+	vdd-micbias-supply = <&pm8916_l13>;
+};
+
+&rpm_requests {
+	pm8916_rpm_regulators: regulators {
+		compatible = "qcom,rpm-pm8916-regulators";
+		vdd_l1_l2_l3-supply = <&pm8916_s3>;
+		vdd_l4_l5_l6-supply = <&pm8916_s4>;
+		vdd_l7-supply = <&pm8916_s4>;
+
+		/* pm8916_s1 is managed by rpmpd (MSM8939_VDDMDCX) */
+		/* pm8916_s2 is managed by rpmpd (MSM8939_VDDCX) */
+		pm8916_s3: s3 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on; /* Needed for L2 */
+		};
+		pm8916_s4: s4 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-always-on; /* Needed for L5/L7 */
+		};
+
+		/*
+		 * Some of the regulators are unused or managed by another
+		 * processor (e.g. the modem). We should still define nodes for
+		 * them to ensure the vote from the application processor can be
+		 * dropped in case the regulators are already on during boot.
+		 *
+		 * The labels for these nodes are omitted on purpose because
+		 * boards should configure a proper voltage before using them.
+		 */
+		l1 {};
+
+		pm8916_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on; /* Needed for LPDDR RAM */
+		};
+
+		/* pm8916_l3 is managed by rpmpd (MSM8939_VDDMX) */
+
+		l4 {};
+
+		pm8916_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on; /* Needed for most digital I/O */
+		};
+
+		pm8916_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8916_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on; /* Needed for CPU PLL */
+		};
+
+		pm8916_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8916_l9: l9 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		l10 {};
+
+		pm8916_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		pm8916_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8916_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		l14 {};
+		l15 {};
+		l16 {};
+		l17 {};
+		l18 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8916_l8>;
+	vqmmc-supply = <&pm8916_l5>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8916_l11>;
+	vqmmc-supply = <&pm8916_l12>;
+};
+
+&usb_hs_phy {
+	v1p8-supply = <&pm8916_l7>;
+	v3p3-supply = <&pm8916_l13>;
+};
+
+&wcnss {
+	vddpx-supply = <&pm8916_l7>;
+};
+
+&wcnss_iris {
+	vddxo-supply = <&pm8916_l7>;
+	vddrfa-supply = <&pm8916_s3>;
+	vddpa-supply = <&pm8916_l9>;
+	vdddig-supply = <&pm8916_l5>;
+};
+
diff --git a/arch/arm64/boot/dts/qcom/msm8929-wingtech-wt82918hd.dts b/arch/arm64/boot/dts/qcom/msm8929-wingtech-wt82918hd.dts
new file mode 100644
index 000000000000..8feecffb16bf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8929-wingtech-wt82918hd.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8929-pm8916.dtsi"
+#include "msm8939-wingtech-wt82918.dtsi"
+
+/ {
+	model = "Lenovo Vibe K5 (HD) (Wingtech WT82918)";
+	compatible = "wingtech,wt82918hd", "qcom,msm8929";
+	chassis-type = "handset";
+};
+
+&touchscreen {
+	touchscreen-size-x = <720>;
+	touchscreen-size-y = <1280>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8929.dtsi b/arch/arm64/boot/dts/qcom/msm8929.dtsi
new file mode 100644
index 000000000000..ef7bb1ced954
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8929.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8939.dtsi"
+
+&opp_table {
+	/delete-node/ opp-550000000;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
new file mode 100644
index 000000000000..18381a66daef
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Huawei Honor 5X / GR5 (2016)";
+	compatible = "huawei,kiwi", "qcom,msm8939";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1600000>;
+			no-map;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@1e {
+		compatible = "kionix,kx023-1025";
+		reg = <0x1e>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+		mount-matrix = "-1", "0", "0",
+			       "0", "1", "0",
+			       "0", "0", "1";
+	};
+
+	proximity@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		led-max-microamp = <25000>;
+		amstaos,proximity-diodes = <0>;
+
+		pinctrl-0 = <&prox_irq_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@1c {
+		compatible = "cypress,tt21000";
+
+		reg = <0x1c>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		/*
+		 * NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a
+		 * fixed regulator that is automatically enabled by pm8916_l16.
+		 */
+		vdd-supply = <&pm8916_l16>;
+		vddio-supply = <&pm8916_l16>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+};
+
+&pm8916_l8 {
+	regulator-min-microvolt = <2950000>;
+	regulator-max-microvolt = <2950000>;
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	prox_irq_default: prox-irq-default-state {
+		pins = "gpio113";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		pins = "gpio12", "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
index 6802714fda3f..13422a19c26a 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
@@ -8,6 +8,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 
 / {
@@ -120,6 +121,66 @@
 
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&status_led_default>;
+		pinctrl-names = "default";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+
+	flash-led-controller@53 {
+		compatible = "silergy,sy7802";
+		reg = <0x53>;
+
+		enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&camera_rear_flash_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			led-sources = <0>, <1>;
+		};
+	};
+};
+
 &blsp_i2c3 {
 	status = "okay";
 
@@ -139,6 +200,7 @@
 	light-sensor@23 {
 		compatible = "liteon,ltr559";
 		reg = <0x23>;
+		proximity-near-level = <75>;
 
 		vdd-supply = <&pm8916_l17>;
 		vddio-supply = <&pm8916_l5>;
@@ -181,9 +243,22 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
+&pm8916_gpios {
+	status_led_default: status-led-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		bias-disable;
+		output-high;
+	};
+};
+
 &pm8916_mpps {
 	pwm_out: mpp4-state {
 		pins = "mpp4";
@@ -247,6 +322,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	button_backlight_default: button-backlight-default-state {
 		pins = "gpio17";
@@ -262,6 +341,13 @@
 		bias-disable;
 	};
 
+	camera_rear_flash_default: camera-rear-flash-default-state {
+		pins = "gpio9", "gpio16", "gpio51";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
 		pins = "gpio20";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
index fccd8fec8b8f..07613080e79e 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
@@ -3,10 +3,12 @@
 /dts-v1/;
 
 #include "msm8939-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	model = "Samsung Galaxy A7 (2015)";
@@ -31,6 +33,15 @@
 		};
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		charge-term-current-microamp = <150000>;
+		constant-charge-current-max-microamp = <1500000>;
+		constant-charge-voltage-max-microvolt = <4300000>;
+		precharge-current-microamp = <450000>;
+		precharge-upper-limit-microvolt = <3500000>;
+	};
+
 	gpio-hall-sensor {
 		compatible = "gpio-keys";
 
@@ -80,7 +91,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		battery@35 {
+		fuel-gauge@35 {
 			compatible = "richtek,rt5033-battery";
 			reg = <0x35>;
 
@@ -89,6 +100,8 @@
 
 			pinctrl-0 = <&fg_alert_default>;
 			pinctrl-names = "default";
+
+			power-supplies = <&charger>;
 		};
 	};
 
@@ -185,7 +198,7 @@
 		};
 	};
 
-	pwm_vibrator: pwm-vibrator {
+	pwm_vibrator: pwm {
 		compatible = "clk-pwm";
 		#pwm-cells = <2>;
 
@@ -284,6 +297,24 @@
 
 		pinctrl-0 = <&muic_int_default>;
 		pinctrl-names = "default";
+
+		usb_con: connector {
+			compatible = "usb-b-connector";
+			label = "micro-USB";
+			type = "micro";
+		};
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	speaker_codec: audio-codec@34 {
+		compatible = "nxp,tfa9895";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l5>;
+		sound-name-prefix = "Speaker";
+		#sound-dai-cells = <0>;
 	};
 };
 
@@ -305,10 +336,72 @@
 	};
 };
 
+&blsp_i2c6 {
+	status = "okay";
+
+	pmic@34 {
+		compatible = "richtek,rt5033";
+		reg = <0x34>;
+
+		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+
+		regulators {
+			rt5033_reg_safe_ldo: SAFE_LDO {
+				regulator-min-microvolt = <4900000>;
+				regulator-max-microvolt = <4900000>;
+				regulator-always-on;
+			};
+
+			/*
+			 * Needed for camera, but not used yet.
+			 * Define empty nodes to allow disabling the unused
+			 * regulators.
+			 */
+			LDO {};
+			BUCK {};
+		};
+
+		charger: charger {
+			compatible = "richtek,rt5033-charger";
+			monitored-battery = <&battery>;
+			richtek,usb-connector = <&usb_con>;
+		};
+	};
+};
+
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -321,6 +414,13 @@
 	};
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -335,6 +435,32 @@
 	status = "okay";
 };
 
+&sound {
+	model = "samsung-a2015";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	extcon = <&muic>, <&muic>;
 	status = "okay";
@@ -434,6 +560,13 @@
 		bias-disable;
 	};
 
+	pmic_int_default: pmic-int-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	reg_tsp_en_default: reg-tsp-en-default-state {
 		pins = "gpio73";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dts b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dts
new file mode 100644
index 000000000000..aa6b699aa2a1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include "msm8939-wingtech-wt82918.dtsi"
+
+/ {
+	model = "Lenovo Vibe K5 (Wingtech WT82918)";
+	compatible = "wingtech,wt82918", "qcom,msm8939";
+	chassis-type = "handset";
+};
+
+&touchscreen {
+	touchscreen-size-x = <1080>;
+	touchscreen-size-y = <1920>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi
new file mode 100644
index 000000000000..a5187355f9fa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pm8916_pwm 0 100000>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <128>;
+	};
+
+	flash-led-controller {
+		compatible = "sgmicro,sgm3140";
+		enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&camera_front_flash_default>;
+		pinctrl-names = "default";
+
+		flash_led: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_CHARGING;
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			retain-state-suspended;
+		};
+
+		led-1 {
+			gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			retain-state-suspended;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@68 {
+		compatible = "invensense,icm20608";
+		reg = <0x68>;
+
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&accelerometer_default>;
+		pinctrl-names = "default";
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		mount-matrix = "-1", "0", "0",
+				"0", "1", "0",
+				"0", "0", "1";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen: touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		vcc-supply = <&pm8916_l17>;
+		iovcc-supply = <&pm8916_l6>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_pwm {
+	pinctrl-0 = <&pwm_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default>;
+	pinctrl-1 = <&sdc2_sleep>;
+	pinctrl-names = "default", "sleep";
+	non-removable;
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	accelerometer_default: accelerometer-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	camera_front_flash_default: camera-front-flash-default-state {
+		pins = "gpio31", "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio36", "gpio69";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&pm8916_mpps {
+	pwm_out: mpp4-state {
+		pins = "mpp4";
+		function = "digital";
+		power-source = <PM8916_MPP_VPH>;
+		output-low;
+		qcom,dtest = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918hd.dts b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918hd.dts
new file mode 100644
index 000000000000..59414db42508
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918hd.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include "msm8939-wingtech-wt82918.dtsi"
+
+/ {
+	model = "Lenovo Vibe K5 (HD) (Wingtech WT82918)";
+	compatible = "wingtech,wt82918hdhw39", "qcom,msm8939";
+	chassis-type = "handset";
+};
+
+&touchscreen {
+	touchscreen-size-x = <720>;
+	touchscreen-size-y = <1280>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 324b5d26db40..eb64ec35e7f0 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -4,12 +4,14 @@
  * Copyright (c) 2020-2023, Linaro Limited
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8939.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/interconnect/qcom,msm8939.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8939.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -33,7 +35,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};
 
@@ -41,122 +43,130 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@100 {
+		cpu0: cpu@100 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x100>;
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
-			cpu-idle-states = <&CPU_SLEEP_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs1_mbox>;
 			#cooling-cells = <2>;
-			L2_1: l2-cache {
+			l2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU1: cpu@101 {
+		cpu1: cpu@101 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x101>;
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
-			cpu-idle-states = <&CPU_SLEEP_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs1_mbox>;
 			#cooling-cells = <2>;
 		};
 
-		CPU2: cpu@102 {
+		cpu2: cpu@102 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x102>;
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 			qcom,acc = <&acc2>;
 			qcom,saw = <&saw2>;
-			cpu-idle-states = <&CPU_SLEEP_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs1_mbox>;
 			#cooling-cells = <2>;
 		};
 
-		CPU3: cpu@103 {
+		cpu3: cpu@103 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x103>;
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 			qcom,acc = <&acc3>;
 			qcom,saw = <&saw3>;
-			cpu-idle-states = <&CPU_SLEEP_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs1_mbox>;
 			#cooling-cells = <2>;
 		};
 
-		CPU4: cpu@0 {
+		cpu4: cpu@0 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x0>;
 			qcom,acc = <&acc4>;
 			qcom,saw = <&saw4>;
-			cpu-idle-states = <&CPU_SLEEP_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs0_mbox>;
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
+			next-level-cache = <&l2_0>;
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU5: cpu@1 {
+		cpu5: cpu@1 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x1>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,acc = <&acc5>;
 			qcom,saw = <&saw5>;
-			cpu-idle-states = <&CPU_SLEEP_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs0_mbox>;
 			#cooling-cells = <2>;
 		};
 
-		CPU6: cpu@2 {
+		cpu6: cpu@2 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x2>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,acc = <&acc6>;
 			qcom,saw = <&saw6>;
-			cpu-idle-states = <&CPU_SLEEP_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs0_mbox>;
 			#cooling-cells = <2>;
 		};
 
-		CPU7: cpu@3 {
+		cpu7: cpu@3 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x3>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,acc = <&acc7>;
 			qcom,saw = <&saw7>;
-			cpu-idle-states = <&CPU_SLEEP_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs0_mbox>;
 			#cooling-cells = <2>;
 		};
 
 		idle-states {
-			CPU_SLEEP_0: cpu-sleep-0 {
+			cpu_sleep_0: cpu-sleep-0 {
 				compatible = "arm,idle-state";
 				entry-latency-us = <130>;
 				exit-latency-us = <150>;
@@ -181,19 +191,19 @@
 		/* LITTLE (efficiency) cluster */
 		cluster0 {
 			core0 {
-				cpu = <&CPU4>;
+				cpu = <&cpu4>;
 			};
 
 			core1 {
-				cpu = <&CPU5>;
+				cpu = <&cpu5>;
 			};
 
 			core2 {
-				cpu = <&CPU6>;
+				cpu = <&cpu6>;
 			};
 
 			core3 {
-				cpu = <&CPU7>;
+				cpu = <&cpu7>;
 			};
 		};
 
@@ -201,19 +211,19 @@
 		/* Boot CPU is cluster 1 core 0 */
 		cluster1 {
 			core0 {
-				cpu = <&CPU0>;
+				cpu = <&cpu0>;
 			};
 
 			core1 {
-				cpu = <&CPU1>;
+				cpu = <&cpu1>;
 			};
 
 			core2 {
-				cpu = <&CPU2>;
+				cpu = <&cpu2>;
 			};
 
 			core3 {
-				cpu = <&CPU3>;
+				cpu = <&cpu3>;
 			};
 		};
 	};
@@ -251,7 +261,7 @@
 			qcom,smd-edge = <15>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8936";
+				compatible = "qcom,rpm-msm8936", "qcom,smd-rpm";
 				qcom,smd-channels = "rpm_requests";
 
 				rpmcc: clock-controller {
@@ -442,8 +452,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		qcom,ipc-1 = <&apcs1_mbox 8 13>;
-		qcom,ipc-3 = <&apcs1_mbox 8 19>;
+		mboxes = <0>, <&apcs1_mbox 13>, <0>, <&apcs1_mbox 19>;
 
 		apps_smsm: apps@0 {
 			reg = <0>;
@@ -601,9 +610,6 @@
 		bimc: interconnect@400000 {
 			compatible = "qcom,msm8939-bimc";
 			reg = <0x00400000 0x62000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
@@ -647,25 +653,16 @@
 		pcnoc: interconnect@500000 {
 			compatible = "qcom,msm8939-pcnoc";
 			reg = <0x00500000 0x11000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8939-snoc";
 			reg = <0x00580000 0x14080>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 			#interconnect-cells = <1>;
 
 			snoc_mm: interconnect-snoc {
 				compatible = "qcom,msm8939-snoc-mm";
-				clock-names = "bus", "bus_a";
-				clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>,
-					 <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>;
 				#interconnect-cells = <1>;
 			};
 		};
@@ -908,28 +905,50 @@
 				bias-pull-down;
 			};
 
-			blsp_uart1_default: blsp-uart1-default-state {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
-				function = "blsp_uart1";
-				drive-strength = <16>;
-				bias-disable;
+			blsp_uart1_console_default: blsp-uart1-console-default-state {
+				tx-pins {
+					pins = "gpio0";
+					function = "blsp_uart1";
+					drive-strength = <16>;
+					bias-disable;
+					bootph-all;
+				};
+
+				rx-pins {
+					pins = "gpio1";
+					function = "blsp_uart1";
+					drive-strength = <16>;
+					bias-pull-up;
+					bootph-all;
+				};
 			};
 
-			blsp_uart1_sleep: blsp-uart1-sleep-state {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			blsp_uart1_console_sleep: blsp-uart1-console-sleep-state {
+				pins = "gpio0", "gpio1";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp_uart2_default: blsp-uart2-default-state {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart2";
-				drive-strength = <16>;
-				bias-disable;
+			blsp_uart2_console_default: blsp-uart2-console-default-state {
+				tx-pins {
+					pins = "gpio4";
+					function = "blsp_uart2";
+					drive-strength = <16>;
+					bias-disable;
+					bootph-all;
+				};
+
+				rx-pins {
+					pins = "gpio5";
+					function = "blsp_uart2";
+					drive-strength = <16>;
+					bias-pull-up;
+					bootph-all;
+				};
 			};
 
-			blsp_uart2_sleep: blsp-uart2-sleep-state {
+			blsp_uart2_console_sleep: blsp-uart2-console-sleep-state {
 				pins = "gpio4", "gpio5";
 				function = "gpio";
 				drive-strength = <2>;
@@ -1184,8 +1203,8 @@
 			reg = <0x01800000 0x80000>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
 				 <0>,
 				 <0>,
 				 <0>;
@@ -1230,6 +1249,8 @@
 
 			power-domains = <&gcc MDSS_GDSC>;
 
+			resets = <&gcc GCC_MDSS_BCR>;
+
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#interrupt-cells = <1>;
@@ -1303,8 +1324,8 @@
 					      "core";
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi0_phy>;
 				status = "disabled";
@@ -1372,8 +1393,8 @@
 					      "core";
 				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
 						  <&gcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 				phys = <&mdss_dsi1_phy>;
 				status = "disabled";
 
@@ -1438,6 +1459,8 @@
 			power-domains = <&gcc OXILI_GDSC>;
 			operating-points-v2 = <&opp_table>;
 			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+			#cooling-cells = <2>;
+
 			status = "disabled";
 
 			opp_table: opp-table {
@@ -1537,6 +1560,20 @@
 			#interrupt-cells = <4>;
 		};
 
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,msm8916-mss-pil";
 			reg = <0x04080000 0x100>, <0x04020000 0x040>;
@@ -1569,6 +1606,22 @@
 			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
 			status = "disabled";
 
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&hexagon_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
 			mba {
 				memory-region = <&mba_mem>;
 			};
@@ -1585,6 +1638,54 @@
 				qcom,remote-pid = <1>;
 
 				label = "hexagon";
+
+				apr: apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					q6core: service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
 			};
 		};
 
@@ -1682,6 +1783,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {
@@ -1692,9 +1794,6 @@
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
 			dma-names = "tx", "rx";
-			pinctrl-0 = <&blsp_uart1_default>;
-			pinctrl-1 = <&blsp_uart1_sleep>;
-			pinctrl-names = "default", "sleep";
 			status = "disabled";
 		};
 
@@ -1706,9 +1805,6 @@
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
 			dma-names = "tx", "rx";
-			pinctrl-0 = <&blsp_uart2_default>;
-			pinctrl-1 = <&blsp_uart2_sleep>;
-			pinctrl-names = "default", "sleep";
 			status = "disabled";
 		};
 
@@ -1997,7 +2093,7 @@
 
 			smd-edge {
 				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
-				qcom,ipc = <&apcs1_mbox 8 17>;
+				mboxes = <&apcs1_mbox 17>;
 				qcom,smd-edge = <6>;
 				qcom,remote-pid = <4>;
 
@@ -2116,6 +2212,8 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			/* Necessary because firmware does not configure this correctly */
+			clock-frequency = <19200000>;
 
 			frame@b121000 {
 				reg = <0x0b121000 0x1000>,
@@ -2227,7 +2325,6 @@
 	thermal_zones: thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -2248,17 +2345,16 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu0_alert>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 6>;
 
@@ -2279,17 +2375,16 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu1_alert>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 7>;
 
@@ -2310,17 +2405,16 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu2_alert>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 8>;
 
@@ -2341,17 +2435,16 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu3_alert>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu4567-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 9>;
 
@@ -2372,20 +2465,26 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu4567_alert>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		gpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 3>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				gpu_alert0: trip-point0 {
 					temperature = <75000>;
@@ -2393,7 +2492,7 @@
 					type = "passive";
 				};
 
-				gpu_crit: gpu_crit {
+				gpu_crit: gpu-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -2403,7 +2502,6 @@
 
 		modem1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 0>;
 
@@ -2418,7 +2516,6 @@
 
 		modem2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 2>;
 
@@ -2433,7 +2530,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 1>;
 
diff --git a/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts b/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts
new file mode 100644
index 000000000000..ef4faf763132
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Cristian Cozzolino
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Billion Capture+";
+	compatible = "flipkart,rimob", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <0x340008 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (1920 * 1080 * 3)>;
+
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_key_default>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+		vdd_l23-supply = <&pm8953_s3>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <1156000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <135 4>;
+
+	gpio_key_default: gpio-key-default-state {
+		pins = "gpio85";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts
index 711d84dad9d7..2edf804eb7c9 100644
--- a/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts
+++ b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts
@@ -301,5 +301,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
index a5957e79b818..ddd7af616794 100644
--- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
@@ -296,7 +296,7 @@
 	vmmc-supply = <&pm8953_l11>;
 	vqmmc-supply = <&pm8953_l12>;
 
-	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
 
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
@@ -321,5 +321,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
index ed95d09cedb1..bdf1bfc79c56 100644
--- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
@@ -111,6 +111,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -325,5 +326,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
index 61ff629c9bf3..fccb9c4360ca 100644
--- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
@@ -104,6 +104,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -321,5 +322,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
index 1a1d3f92a511..d46325e79917 100644
--- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
@@ -113,6 +113,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -356,5 +357,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index e7de7632669a..76317c578349 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -1,9 +1,12 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8953.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,msm8953.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,apr.h>
@@ -38,125 +41,141 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_0>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_0>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_0>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_0>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
 
-		CPU4: cpu@100 {
+		cpu4: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_1>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
+			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
 
-		CPU5: cpu@101 {
+		cpu5: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_1>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
+			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
 
-		CPU6: cpu@102 {
+		cpu6: cpu@102 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_1>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
+			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
 
-		CPU7: cpu@103 {
+		cpu7: cpu@103 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_1>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
+			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 			};
 
 			cluster1 {
 				core0 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 				core1 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 				core2 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 				core3 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
 
-		L2_0: l2-cache-0 {
+		l2_0: l2-cache-0 {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
 		};
 
-		L2_1: l2-cache-1 {
+		l2_1: l2-cache-1 {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
@@ -174,10 +193,10 @@
 		};
 	};
 
-	memory {
+	memory@10000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
+		reg = <0 0x10000000 0 0>;
 	};
 
 	pmu {
@@ -195,11 +214,11 @@
 
 		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
+			mboxes = <&apcs 0>;
 			qcom,smd-edge = <15>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8953";
+				compatible = "qcom,rpm-msm8953", "qcom,smd-rpm";
 				qcom,smd-channels = "rpm_requests";
 
 				rpmcc: clock-controller {
@@ -361,7 +380,7 @@
 
 		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 14>;
+		mboxes = <&apcs 14>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <1>;
@@ -386,7 +405,7 @@
 
 		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 18>;
+		mboxes = <&apcs 18>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <4>;
@@ -411,8 +430,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		qcom,ipc-1 = <&apcs 8 13>;
-		qcom,ipc-3 = <&apcs 8 19>;
+		mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>;
 
 		apps_smsm: apps@0 {
 			reg = <0>;
@@ -471,6 +489,13 @@
 			clock-names = "core";
 		};
 
+		bimc: interconnect@400000 {
+			compatible = "qcom,msm8953-bimc";
+			reg = <0x00400000 0x5a000>;
+
+			#interconnect-cells = <2>;
+		};
+
 		tsens0: thermal-sensor@4a9000 {
 			compatible = "qcom,msm8953-tsens", "qcom,tsens-v2";
 			reg = <0x004a9000 0x1000>, /* TM */
@@ -487,6 +512,29 @@
 			reg = <0x004ab000 0x4>;
 		};
 
+		pcnoc: interconnect@500000 {
+			compatible = "qcom,msm8953-pcnoc";
+			reg = <0x00500000 0x12080>;
+
+			clocks = <&gcc GCC_PCNOC_USB3_AXI_CLK>;
+			clock-names = "pcnoc_usb3_axi";
+
+			#interconnect-cells = <2>;
+		};
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8953-snoc";
+			reg = <0x00580000 0x16080>;
+
+			#interconnect-cells = <2>;
+
+			snoc_mm: interconnect-snoc {
+				compatible = "qcom,msm8953-snoc-mm";
+
+				#interconnect-cells = <2>;
+			};
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,msm8953-pinctrl";
 			reg = <0x01000000 0x300000>;
@@ -726,6 +774,148 @@
 				bias-disable;
 			};
 
+			spi_3_default: spi-3-default-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "blsp_spi3";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			spi_3_sleep: spi-3-sleep-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			spi_5_default: spi-5-default-state {
+				cs-pins {
+					pins = "gpio18";
+					function = "blsp_spi5";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio16", "gpio17", "gpio19";
+					function = "blsp_spi5";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			spi_5_sleep: spi-5-sleep-state {
+				cs-pins {
+					pins = "gpio18";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio16", "gpio17", "gpio19";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			spi_6_default: spi-6-default-state {
+				cs-pins {
+					pins = "gpio22";
+					function = "blsp_spi6";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			spi_6_sleep: spi-6-sleep-state {
+				cs-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			spi_7_default: spi-7-default-state {
+				cs-pins {
+					pins = "gpio136";
+					function = "blsp_spi7";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio135", "gpio137", "gpio138";
+					function = "blsp_spi7";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			spi_7_sleep: spi-7-sleep-state {
+				cs-pins {
+					pins = "gpio136";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio135", "gpio137", "gpio138";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			uart_5_default: uart-5-default-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "blsp_uart5";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			uart_5_sleep: uart-5-sleep-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			wcnss_pin_a: wcnss-active-state {
 
 				wcss-wlan2-pins {
@@ -766,10 +956,10 @@
 			#power-domain-cells = <1>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>;
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>;
 			clock-names = "xo",
 				      "sleep",
 				      "dsi0pll",
@@ -808,6 +998,13 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
+			interconnects = <&snoc_mm MAS_MDP RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_DISP_SS_CFG RPM_ACTIVE_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
 			clocks = <&gcc GCC_MDSS_AHB_CLK>,
 				 <&gcc GCC_MDSS_AXI_CLK>,
 				 <&gcc GCC_MDSS_VSYNC_CLK>,
@@ -817,6 +1014,8 @@
 				      "vsync",
 				      "core";
 
+			resets = <&gcc GCC_MDSS_BCR>;
+
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -874,8 +1073,8 @@
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_AHB_CLK>,
@@ -944,8 +1143,8 @@
 
 				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
 						  <&gcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_AHB_CLK>,
@@ -1002,9 +1201,133 @@
 			};
 		};
 
+		gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-506.0", "qcom,adreno";
+			reg = <0x01c00000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
+				 <&gcc GCC_OXILI_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_BIMC_GPU_CLK>,
+				 <&gcc GCC_OXILI_TIMER_CLK>,
+				 <&gcc GCC_OXILI_AON_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "rbbmtimer",
+				      "alwayson";
+			power-domains = <&gcc OXILI_GX_GDSC>;
+
+			interconnects = <&bimc MAS_OXILI RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_GPU_CFG RPM_ACTIVE_TAG>;
+
+			iommus = <&gpu_iommu 0>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			gpu_zap_shader: zap-shader {
+				memory-region = <&zap_shader_region>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_min_svs>;
+				};
+
+				opp-133300000 {
+					opp-hz = /bits/ 64 <133300000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_min_svs>;
+				};
+
+				opp-216000000 {
+					opp-hz = /bits/ 64 <216000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+
+				opp-510000000 {
+					opp-hz = /bits/ 64 <510000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+
+				opp-560000000 {
+					opp-hz = /bits/ 64 <560000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+				};
+
+				/*
+				 * This opp is only available on msm8953 and
+				 * sdm632, the max for sdm450 is 600MHz.
+				 */
+				opp-650000000 {
+					opp-hz = /bits/ 64 <650000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_turbo>;
+				};
+			};
+		};
+
+		gpu_iommu: iommu@1c48000 {
+			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v2";
+			ranges = <0 0x01c48000 0x8000>;
+
+			clocks = <&gcc GCC_OXILI_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>;
+			clock-names = "iface", "bus";
+
+			power-domains = <&gcc OXILI_CX_GDSC>;
+
+			qcom,iommu-secure-id = <18>;
+
+			#address-cells = <1>;
+			#iommu-cells = <1>;
+			#size-cells = <1>;
+
+			/* gfx3d_user */
+			iommu-ctx@0 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x0000 0x1000>;
+				interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* gfx3d_secure */
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v2-sec";
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		apps_iommu: iommu@1e20000 {
 			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
-			ranges  = <0 0x01e20000 0x20000>;
+			ranges = <0 0x01e20000 0x20000>;
 
 			clocks = <&gcc GCC_SMMU_CFG_CLK>,
 				 <&gcc GCC_APSS_TCU_ASYNC_CLK>;
@@ -1104,7 +1427,7 @@
 				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
 
 				qcom,smd-edge = <0>;
-				qcom,ipc = <&apcs 8 12>;
+				mboxes = <&apcs 12>;
 				qcom,remote-pid = <1>;
 
 				label = "modem";
@@ -1118,9 +1441,12 @@
 			#size-cells = <1>;
 			ranges;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
 				 <&gcc GCC_USB30_MASTER_CLK>,
@@ -1137,6 +1463,13 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <133330000>;
 
+			interconnects = <&pcnoc MAS_USB3 RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_USB3 RPM_ACTIVE_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
 			power-domains = <&gcc USB30_GDSC>;
 
 			qcom,select-utmi-as-pipe-clk;
@@ -1157,6 +1490,20 @@
 				snps,hird-threshold = /bits/ 8 <0x00>;
 
 				maximum-speed = "high-speed";
+
+				usb-role-switch;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_dwc3_hs: endpoint {
+						};
+					};
+				};
 			};
 		};
 
@@ -1175,6 +1522,13 @@
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 
+			interconnects = <&pcnoc MAS_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_SDCC_1 RPM_ACTIVE_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			power-domains = <&rpmpd MSM8953_VDDCX>;
 			operating-points-v2 = <&sdhc1_opp_table>;
 
@@ -1195,26 +1549,36 @@
 
 				opp-25000000 {
 					opp-hz = /bits/ 64 <25000000>;
+					opp-peak-kBps = <200000>, <100000>;
+					opp-avg-kBps = <65360>, <32768>;
 					required-opps = <&rpmpd_opp_low_svs>;
 				};
 
 				opp-50000000 {
 					opp-hz = /bits/ 64 <50000000>;
+					opp-peak-kBps = <400000>, <200000>;
+					opp-avg-kBps = <130718>, <65360>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
+					opp-peak-kBps = <400000>, <400000>;
+					opp-avg-kBps = <130718>, <65360>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-192000000 {
 					opp-hz = /bits/ 64 <192000000>;
+					opp-peak-kBps = <800000>, <600000>;
+					opp-avg-kBps = <261438>, <130718>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 
 				opp-384000000 {
 					opp-hz = /bits/ 64 <384000000>;
+					opp-peak-kBps = <800000>, <800000>;
+					opp-avg-kBps = <261438>, <300000>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 			};
@@ -1235,6 +1599,13 @@
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 
+			interconnects = <&pcnoc MAS_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_SDCC_2 RPM_ACTIVE_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			power-domains = <&rpmpd MSM8953_VDDCX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 
@@ -1251,26 +1622,36 @@
 
 				opp-25000000 {
 					opp-hz = /bits/ 64 <25000000>;
+					opp-peak-kBps = <200000>, <100000>;
+					opp-avg-kBps = <65360>, <32768>;
 					required-opps = <&rpmpd_opp_low_svs>;
 				};
 
 				opp-50000000 {
 					opp-hz = /bits/ 64 <50000000>;
+					opp-peak-kBps = <400000>, <400000>;
+					opp-avg-kBps = <130718>, <65360>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
+					opp-peak-kBps = <800000>, <400000>;
+					opp-avg-kBps = <130718>, <130718>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-177770000 {
 					opp-hz = /bits/ 64 <177770000>;
+					opp-peak-kBps = <600000>, <600000>;
+					opp-avg-kBps = <261438>, <130718>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 
 				opp-200000000 {
 					opp-hz = /bits/ 64 <200000000>;
+					opp-peak-kBps = <800000>, <800000>;
+					opp-avg-kBps = <261438>, <130718>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 			};
@@ -1360,6 +1741,26 @@
 			status = "disabled";
 		};
 
+		spi_3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_3_default>;
+			pinctrl-1 = <&spi_3_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_4: i2c@78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b8000 0x600>;
@@ -1393,6 +1794,24 @@
 			qcom,controlled-remotely;
 		};
 
+		uart_5: serial@7aef000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x07aef000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+
+			pinctrl-0 = <&uart_5_default>;
+			pinctrl-1 = <&uart_5_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+		};
+
 		i2c_5: i2c@7af5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af5000 0x600>;
@@ -1413,6 +1832,26 @@
 			status = "disabled";
 		};
 
+		spi_5: spi@7af5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>,
+				<&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_5_default>;
+			pinctrl-1 = <&spi_5_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_6: i2c@7af6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af6000 0x600>;
@@ -1433,6 +1872,26 @@
 			status = "disabled";
 		};
 
+		spi_6: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_6_default>;
+			pinctrl-1 = <&spi_6_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_7: i2c@7af7000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af7000 0x600>;
@@ -1453,6 +1912,26 @@
 			status = "disabled";
 		};
 
+		spi_7: spi@7af7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af7000 0x600>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_7_default>;
+			pinctrl-1 = <&spi_7_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_8: i2c@7af8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af8000 0x600>;
@@ -1508,7 +1987,7 @@
 			smd-edge {
 				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
 
-				qcom,ipc = <&apcs 8 17>;
+				mboxes = <&apcs 17>;
 				qcom,smd-edge = <6>;
 				qcom,remote-pid = <4>;
 
@@ -1645,7 +2124,7 @@
 				apr {
 					compatible = "qcom,apr-v2";
 					qcom,smd-channels = "apr_audio_svc";
-					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					qcom,domain = <APR_DOMAIN_ADSP>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -1693,19 +2172,19 @@
 							#sound-dai-cells = <1>;
 
 							dai@0 {
-								reg = <0>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 								direction = <Q6ASM_DAI_RX>;
 							};
 							dai@1 {
-								reg = <1>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 								direction = <Q6ASM_DAI_TX>;
 							};
 							dai@2 {
-								reg = <2>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 								direction = <Q6ASM_DAI_RX>;
 							};
 							dai@3 {
-								reg = <3>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 								direction = <Q6ASM_DAI_RX>;
 								is-compress-dai;
 							};
@@ -1728,8 +2207,9 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens0 9>;
+
 			trips {
 				cpu0_alert: trip-point0 {
 					temperature = <80000>;
@@ -1745,14 +2225,15 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu0_alert>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens0 10>;
+
 			trips {
 				cpu1_alert: trip-point0 {
 					temperature = <80000>;
@@ -1768,14 +2249,15 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu1_alert>;
-					cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens0 11>;
+
 			trips {
 				cpu2_alert: trip-point0 {
 					temperature = <80000>;
@@ -1791,14 +2273,15 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu2_alert>;
-					cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens0 12>;
+
 			trips {
 				cpu3_alert: trip-point0 {
 					temperature = <80000>;
@@ -1814,13 +2297,12 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu3_alert>;
-					cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 		cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens0 4>;
 			trips {
 				cpu4_alert: trip-point0 {
@@ -1837,13 +2319,12 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu4_alert>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 		cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens0 5>;
 			trips {
 				cpu5_alert: trip-point0 {
@@ -1860,13 +2341,12 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu5_alert>;
-					cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 		cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens0 6>;
 			trips {
 				cpu6_alert: trip-point0 {
@@ -1883,13 +2363,12 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu6_alert>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 		cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens0 7>;
 			trips {
 				cpu7_alert: trip-point0 {
@@ -1906,7 +2385,33 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu7_alert>;
-					cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				gpu_alert: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8956.dtsi b/arch/arm64/boot/dts/qcom/msm8956.dtsi
index 668e05185c21..fa36b62156bb 100644
--- a/arch/arm64/boot/dts/qcom/msm8956.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8956.dtsi
@@ -8,8 +8,8 @@
 
 #include "msm8976.dtsi"
 
-&pmu {
-	interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+&pmu_a72 {
+	interrupts = <GIC_PPI 7 (GIC_CPU_MASK_RAW(0x30) | IRQ_TYPE_LEVEL_HIGH)>;
 };
 
 &tsens {
diff --git a/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
new file mode 100644
index 000000000000..18832a3b9a1c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, André Apitzsch <git@apitzsch.eu>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "msm8976.dtsi"
+#include "pm8004.dtsi"
+#include "pm8950.dtsi"
+
+/ {
+	model = "BQ Aquaris X5 Plus (Longcheer L9360)";
+	compatible = "longcheer,l9360", "qcom,msm8976";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@83200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x83200000 0x0 (1080 * 1920 * 3)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_sensor_default>, <&volume_up_default>;
+		pinctrl-names = "default";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&tlmm 101 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_WHITE>;
+			default-state = "off";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+
+			pinctrl-0 = <&button_backlight_default>;
+			pinctrl-names = "default";
+		};
+	};
+
+	reg_ts_vdd: regulator-vdd-ts {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-vdd-ts";
+
+		gpio = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		framebuffer@83000000 {
+			reg = <0x0 0x83000000 0x0 0x2800000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	nfc@28 {
+		compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupts-extended = <&tlmm 140 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&tlmm 122 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 109 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&nfc_default>;
+		pinctrl-1 = <&nfc_sleep>;
+		pinctrl-names = "default", "sleep";
+	};
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+
+	touchscreen@20 {
+		reg = <0x20>;
+		compatible = "syna,rmi4-i2c";
+
+		interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&ts_int_default>, <&ts_reset_default>;
+		pinctrl-1 = <&ts_int_sleep>, <&ts_reset_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		vdd-supply = <&pm8950_l6>;
+		vio-supply = <&reg_ts_vdd>;
+
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+
+		rmi4-f1a@1a {
+			reg = <0x1a>;
+			/* Keys listed from right to left */
+			linux,keycodes = <KEY_APPSELECT KEY_HOMEPAGE KEY_BACK>;
+		};
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&gcc {
+	vdd_gfx-supply = <&pm8004_s5>;
+};
+
+&pm8004_spmi_regulators {
+	vdd_s2-supply = <&vph_pwr>;
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 1 supply */
+	pm8004_s2: s2 {
+		/* regulator-min-microvolt = <500000>; */
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc1";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pm8004_s5: s5 {
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-enable-ramp-delay = <500>;
+		regulator-name = "vdd_gfx";
+		/* Hack this on until the gpu driver is ready for it */
+		regulator-always-on;
+	};
+};
+
+&pm8950_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8950_spmi_regulators {
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 0 supply */
+	pm8950_spmi_s5: s5 {
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		/* regulator-min-microvolt = <500000>; */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc0";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&rpm_requests {
+	pm8950_regulators: regulators {
+		compatible = "qcom,rpm-pm8950-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_l1_l19-supply = <&pm8950_s3>;
+		vdd_l2_l23-supply = <&pm8950_s3>;
+		vdd_l3-supply = <&pm8950_s3>;
+		vdd_l5_l6_l7_l16-supply = <&pm8950_s4>;
+		vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+
+		pm8950_s1: s1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1162500>;
+		};
+
+		pm8950_s3: s3 {
+			regulator-min-microvolt = <1325000>;
+			regulator-max-microvolt = <1325000>;
+		};
+
+		pm8950_s4: s4 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8950_l1: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l3: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8950_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8950_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8950_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8950_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8950_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8950_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8950_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8950_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8950_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&pm8950_l8>;
+	vqmmc-supply = <&pm8950_l5>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	bus-width = <4>;
+	cd-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&pm8950_l11>;
+	vqmmc-supply = <&pm8950_l12>;
+
+	pinctrl-0 = <&sdc2_default>, <&sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep>, <&sdc2_cd_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+
+	button_backlight_default: button-backlight-default-state {
+		pins = "gpio101";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	hall_sensor_default: hall-sensor-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_default: nfc-default-state {
+		pins = "gpio122", "gpio140";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_sleep: nfc-sleep-state {
+		int-pins {
+			pins = "gpio140";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+		ven-pins {
+			pins = "gpio122";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-disable;
+		};
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio100";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_sleep: sdc2-cd-sleep-state {
+		pins = "gpio100";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_int_sleep: ts-int-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	ts_reset_default: ts-reset-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset_sleep: ts-sleep-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	volume_up_default: volume-up-default-state {
+		pins = "gpio113";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index d2bb1ada361a..f9962512f243 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -6,6 +6,7 @@
  * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8976.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -31,7 +32,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
@@ -42,7 +43,7 @@
 			#cooling-cells = <2>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
@@ -53,7 +54,7 @@
 			#cooling-cells = <2>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
@@ -64,7 +65,7 @@
 			#cooling-cells = <2>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
@@ -75,7 +76,7 @@
 			#cooling-cells = <2>;
 		};
 
-		CPU4: cpu@100 {
+		cpu4: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x100>;
@@ -86,7 +87,7 @@
 			#cooling-cells = <2>;
 		};
 
-		CPU5: cpu@101 {
+		cpu5: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x101>;
@@ -97,7 +98,7 @@
 			#cooling-cells = <2>;
 		};
 
-		CPU6: cpu@102 {
+		cpu6: cpu@102 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x102>;
@@ -108,7 +109,7 @@
 			#cooling-cells = <2>;
 		};
 
-		CPU7: cpu@103 {
+		cpu7: cpu@103 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x103>;
@@ -122,37 +123,37 @@
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 			};
 
 			cluster1 {
 				core0 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core1 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core2 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core3 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -222,11 +223,17 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
-	pmu: pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	pmu_a72: pmu-a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_RAW(0xf0) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -237,11 +244,11 @@
 
 		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
+			mboxes = <&apcs 0>;
 			qcom,smd-edge = <15>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8976";
+				compatible = "qcom,rpm-msm8976", "qcom,smd-rpm";
 				qcom,smd-channels = "rpm_requests";
 
 				rpmcc: clock-controller {
@@ -361,7 +368,7 @@
 	smp2p-hexagon {
 		compatible = "qcom,smp2p";
 		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
-		qcom,ipc = <&apcs 8 10>;
+		mboxes = <&apcs 10>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <2>;
@@ -384,7 +391,7 @@
 	smp2p-modem {
 		compatible = "qcom,smp2p";
 		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
-		qcom,ipc = <&apcs 8 14>;
+		mboxes = <&apcs 14>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <1>;
@@ -407,7 +414,7 @@
 	smp2p-wcnss {
 		compatible = "qcom,smp2p";
 		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
-		qcom,ipc = <&apcs 8 18>;
+		mboxes = <&apcs 18>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <4>;
@@ -433,9 +440,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		qcom,ipc-1 = <&apcs 8 13>;
-		qcom,ipc-2 = <&apcs 8 9>;
-		qcom,ipc-3 = <&apcs 8 19>;
+		mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>;
 
 		apps_smsm: apps@0 {
 			reg = <0>;
@@ -659,6 +664,11 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,msm8976-pinctrl";
 			reg = <0x01000000 0x300000>;
@@ -771,6 +781,72 @@
 				drive-strength = <2>;
 				bias-disable;
 			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			wcss_wlan_default: wcss-wlan-default-state  {
+				wcss-wlan2-pins {
+					pins = "gpio40";
+					function = "wcss_wlan2";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan1-pins {
+					pins = "gpio41";
+					function = "wcss_wlan1";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan0-pins {
+					pins = "gpio42";
+					function = "wcss_wlan0";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan-pins {
+					pins = "gpio43", "gpio44";
+					function = "wcss_wlan";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		gcc: clock-controller@1800000 {
@@ -785,10 +861,10 @@
 
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>;
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>;
 			clock-names = "xo",
 				      "xo_a",
 				      "dsi0pll",
@@ -808,6 +884,430 @@
 			reg = <0x01937000 0x30000>;
 		};
 
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync",
+				      "core";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8976-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>,
+					 <&gcc GCC_MDP_TBU_CLK>,
+					 <&gcc GCC_MDP_RT_TBU_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync",
+					      "tbu",
+					      "tbu_rt";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&gcc MDSS_GDSC>;
+
+				iommus = <&apps_iommu 22>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-177780000 {
+						opp-hz = /bits/ 64 <177780000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-320000000 {
+						opp-hz = /bits/ 64 <320000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+
+					opp-360000000 {
+						opp-hz = /bits/ 64 <360000000>;
+						required-opps = <&rpmpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a94000 {
+				compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x01a94000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				assigned-clocks = <&gcc GCC_MDSS_BYTE0_CLK_SRC>,
+						  <&gcc GCC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				operating-points-v2 = <&dsi0_opp_table>;
+				power-domains = <&gcc MDSS_GDSC>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdss_mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-161250000 {
+						opp-hz = /bits/ 64 <161250000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi1: dsi@1a96000 {
+				compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x01a96000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE1_CLK>,
+					 <&gcc GCC_MDSS_PCLK1_CLK>,
+					 <&gcc GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				assigned-clocks = <&gcc GCC_MDSS_BYTE1_CLK_SRC>,
+						  <&gcc GCC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				operating-points-v2 = <&dsi0_opp_table>;
+				power-domains = <&gcc MDSS_GDSC>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdss_mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a94a00 {
+				compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
+				reg = <0x01a94a00 0xd4>,
+				      <0x01a94400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1_phy: phy@1a96a00 {
+				compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
+				reg = <0x01a96a00 0xd4>,
+				      <0x01a96400 0x280>,
+				      <0x01a96b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		adreno_gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-510.0", "qcom,adreno";
+
+			reg = <0x01c00000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&gcc GCC_GFX3D_OXILI_CLK>,
+				 <&gcc GCC_GFX3D_OXILI_AHB_CLK>,
+				 <&gcc GCC_GFX3D_OXILI_GMEM_CLK>,
+				 <&gcc GCC_GFX3D_BIMC_CLK>,
+				 <&gcc GCC_GFX3D_OXILI_TIMER_CLK>,
+				 <&gcc GCC_GFX3D_OXILI_AON_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem",
+				      "mem_iface",
+				      "rbbmtimer",
+				      "alwayson";
+
+			power-domains = <&gcc OXILI_GX_GDSC>;
+
+			iommus = <&gpu_iommu 0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					required-opps = <&rpmpd_opp_svs>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					required-opps = <&rpmpd_opp_nom>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-480000000 {
+					opp-hz = /bits/ 64 <480000000>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-540000000 {
+					opp-hz = /bits/ 64 <540000000>;
+					required-opps = <&rpmpd_opp_turbo>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-600000000 {
+					opp-hz = /bits/ 64 <600000000>;
+					required-opps = <&rpmpd_opp_turbo>;
+					opp-supported-hw = <0xff>;
+				};
+			};
+		};
+
+		apps_iommu: iommu@1ee0000 {
+			compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2";
+			reg = <0x01ee0000 0x3000>;
+			ranges = <0 0x01e20000 0x20000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+
+			/* VFE */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x15000 0x1000>;
+				qcom,ctx-asid = <20>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x16000 0x1000>;
+				qcom,ctx-asid = <21>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP0 */
+			iommu-ctx@17000 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x17000 0x1000>;
+				qcom,ctx-asid = <22>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2";
+			ranges = <0 0x01f08000 0x8000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX3D_TCU_CLK>;
+			clock-names = "iface", "bus";
+
+			power-domains = <&gcc OXILI_CX_GDSC>;
+
+			qcom,iommu-secure-id = <18>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+
+			/* gfx3d user */
+			iommu-ctx@0 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x0 0x1000>;
+				qcom,ctx-asid = <0>;
+				interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* gfx3d secure */
+			iommu-ctx@1000 {
+				compatible = "qcom,msm-iommu-v2-sec";
+				reg = <0x1000 0x1000>;
+				qcom,ctx-asid = <2>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* gfx3d priv */
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v2-sec";
+				reg = <0x2000 0x1000>;
+				qcom,ctx-asid = <1>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		spmi_bus: spmi@200f000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0200f000 0x1000>,
@@ -867,6 +1367,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp1_uart1: serial@78af000 {
@@ -987,6 +1488,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp2_uart2: serial@7af0000 {
@@ -1034,6 +1536,81 @@
 			status = "disabled";
 		};
 
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>,
+			      <0x0a202000 0x1000>,
+			      <0x0a21b000 0x3000>;
+			reg-names = "ccu",
+				    "dxe",
+				    "pmu";
+
+			memory-region = <&wcnss_fw_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			power-domains = <&rpmpd MSM8976_VDDCX>,
+					<&rpmpd MSM8976_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-0 = <&wcss_wlan_default>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				/* Separate chip, compatible is board-specific */
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>,
+								   <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
@@ -1124,7 +1701,6 @@
 	thermal-zones {
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 0>;
 
@@ -1139,7 +1715,6 @@
 
 		modem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 1>;
 			trips {
@@ -1153,7 +1728,6 @@
 
 		qdsp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 2>;
 			trips {
@@ -1167,7 +1741,6 @@
 
 		cam-isp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 3>;
 			trips {
@@ -1181,7 +1754,7 @@
 
 		cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 4>;
 
 			trips {
@@ -1205,7 +1778,7 @@
 
 		cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 5>;
 
 			trips {
@@ -1229,7 +1802,7 @@
 
 		cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 6>;
 
 			trips {
@@ -1253,7 +1826,7 @@
 
 		cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 7>;
 
 			trips {
@@ -1277,7 +1850,7 @@
 
 		big-l2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 8>;
 
 			trips {
@@ -1301,7 +1874,7 @@
 
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 9>;
 
 			trips {
@@ -1325,7 +1898,7 @@
 
 		gpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 10>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
new file mode 100644
index 000000000000..6a231afad85d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * MSM8992 LG G4 (h815) device tree.
+ *
+ * Copyright (c) 2024, Alexander Reimelt <alexander.reimelt@posteo.de>
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/* different mapping */
+/delete-node/ &cont_splash_mem;
+
+/* disabled downstream */
+/delete-node/ &dfps_data_mem;
+
+/ {
+	model = "LG G4 (H815)";
+	compatible = "lg,h815", "qcom,msm8992";
+	chassis-type = "handset";
+
+	qcom,msm-id = <0xfb 0x0>;
+	qcom,pmic-id = <0x10009 0x1000a 0x0 0x0>;
+	qcom,board-id = <0xb64 0x0>;
+
+	/* psci is broken */
+	/delete-node/ psci;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		spin-table@6000000 {
+			reg = <0x0 0x06000000 0x0 0x00001000>;
+			no-map;
+		};
+
+		ramoops@ff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x0ff00000 0x0 0x00100000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+			record-size = <0x10000>;
+			ecc-size = <0x10>;
+		};
+
+		cont_splash_mem: fb@3400000 {
+			reg = <0x0 0x03400000 0x0 0x00c00000>;
+			no-map;
+		};
+
+		crash_fb_mem: crash-fb@4000000 {
+			reg = <0x0 0x04000000 0x0 0x00c00000>;
+			no-map;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "Hall Effect Sensor";
+
+		event-hall-sensor {
+			gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+			label = "hall effect sensor";
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-up {
+			label = "volume up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+&cpu0 {
+	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
+};
+
+&cpu1 {
+	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
+};
+
+&cpu2 {
+	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
+};
+
+&cpu3 {
+	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
+};
+
+&cpu4 {
+	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
+};
+
+&cpu5 {
+	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
+};
+
+&pm8994_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pmi8994_s1>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s5>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vph_pwr>;
+		vdd_l9_10_18_22-supply = <&pmi8994_bby>;
+		vdd_l13_19_23_24-supply = <&pmi8994_bby>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&pmi8994_bby>;
+		vdd_l20_21-supply = <&pmi8994_bby>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		/* sdhc1 vqmmc and bcm */
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <325000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		/* sdhc2 vqmmc */
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <22000>;
+			regulator-allow-set-load;
+		};
+
+		/* sdhc1 vmmc */
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		/* sdhc2 vmmc */
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		pmi8994_s1: s1 {
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+
+		/* S2 & S3 - VDD_GFX */
+
+		pmi8994_bby: boost-bypass {
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&sdhc1 {
+	mmc-hs400-1_8v;
+	vmmc-supply = <&pm8994_l20>;
+	vqmmc-supply = <&pm8994_s4>;
+	non-removable;
+	status = "okay";
+};
+
+&sdhc2 {
+	vmmc-supply = <&pm8994_l21>;
+	vqmmc-supply = <&pm8994_l13>;
+	cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&tlmm {
+	hall_sensor_default: hall-sensor-default-state {
+		pins = "gpio75";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
index 133f9c2540bc..d0290a20b888 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -175,7 +175,7 @@
 };
 
 &pm8994_spmi_regulators {
-	VDD_APC0: s8 {
+	s8 {
 		regulator-min-microvolt = <680000>;
 		regulator-max-microvolt = <1180000>;
 		regulator-always-on;
@@ -183,7 +183,7 @@
 	};
 
 	/* APC1 is 3-phase, but quoting downstream, s11 is "the gang leader" */
-	VDD_APC1: s11 {
+	s11 {
 		regulator-min-microvolt = <700000>;
 		regulator-max-microvolt = <1225000>;
 		regulator-always-on;
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 02fc3795dbfd..b2dc46c25fa2 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -6,8 +6,8 @@
 #include "msm8994.dtsi"
 
 /* 8992 only features 2 A57 cores. */
-/delete-node/ &CPU6;
-/delete-node/ &CPU7;
+/delete-node/ &cpu6;
+/delete-node/ &cpu7;
 /delete-node/ &cpu6_map;
 /delete-node/ &cpu7_map;
 
diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
index 29e79ae0849d..1aca11daf83c 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
@@ -2,12 +2,13 @@
 /*
  * Copyright (c) 2015, Huawei Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2023, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2021-2024, Petr Vorel <petr.vorel@gmail.com>
  */
 
 /dts-v1/;
 
 #include "msm8994.dtsi"
+#include "pm8994.dtsi"
 
 / {
 	model = "Huawei Nexus 6P";
@@ -46,6 +47,24 @@
 			no-map;
 		};
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-vol-up {
+			label = "volume up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+&pm8994_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &blsp1_uart2 {
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index cbc84459a5ae..4c983b10dd92 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -377,7 +377,7 @@
 &blsp2_i2c1 {
 	status = "okay";
 
-	sideinteraction: ad7147_captouch@2c {
+	sideinteraction: touch@2c {
 		compatible = "ad,ad7147_captouch";
 		reg = <0x2c>;
 
@@ -387,11 +387,6 @@
 
 		interrupts = <&tlmm 96 IRQ_TYPE_EDGE_FALLING>;
 
-		button_num = <8>;
-		touchpad_num = <0>;
-		wheel_num = <0>;
-		slider_num = <0>;
-
 		vcc-supply = <&vreg_l18a_2p85>;
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index 9dbde79f26a2..0163d41f95f8 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -79,7 +79,7 @@
 			pmsg-size = <0x80000>;
 		};
 
-		fb_region: fb_region@40000000 {
+		fb_region: fb@40000000 {
 			reg = <0 0x40000000 0 0x1000000>;
 			no-map;
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 8295bf1b219d..b5cbdd620bb9 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -34,7 +34,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 			clock-output-names = "sleep_clk";
 		};
 	};
@@ -43,114 +43,114 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
+			next-level-cache = <&l2_0>;
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU4: cpu@100 {
+		cpu4: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
+			next-level-cache = <&l2_1>;
+			l2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU5: cpu@101 {
+		cpu5: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 		};
 
-		CPU6: cpu@102 {
+		cpu6: cpu@102 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 		};
 
-		CPU7: cpu@103 {
+		cpu7: cpu@103 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 			};
 
 			cluster1 {
 				core0 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core1 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				cpu6_map: core2 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				cpu7_map: core3 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -183,12 +183,12 @@
 
 		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
+			mboxes = <&apcs 0>;
 			qcom,smd-edge = <15>;
 			qcom,remote-pid = <6>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8994";
+				compatible = "qcom,rpm-msm8994", "qcom,smd-rpm";
 				qcom,smd-channels = "rpm_requests";
 
 				rpmcc: clock-controller {
@@ -233,7 +233,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		dfps_data_mem: dfps_data_mem@3400000 {
+		dfps_data_mem: dfps-data@3400000 {
 			reg = <0 0x03400000 0 0x1000>;
 			no-map;
 		};
@@ -243,7 +243,7 @@
 			no-map;
 		};
 
-		smem_mem: smem_region@6a00000 {
+		smem_mem: smem@6a00000 {
 			reg = <0 0x06a00000 0 0x200000>;
 			no-map;
 		};
@@ -300,7 +300,7 @@
 
 		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 10>;
+		mboxes = <&apcs 10>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <2>;
@@ -325,7 +325,7 @@
 		interrupt-parent = <&intc>;
 		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 14>;
+		mboxes = <&apcs 14>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <1>;
@@ -437,6 +437,15 @@
 			#size-cells = <1>;
 			ranges;
 
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
+
 			clocks = <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_SLEEP_CLK>,
@@ -1093,10 +1102,10 @@
 
 	timer: timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 2 0xff08>,
-			     <GIC_PPI 3 0xff08>,
-			     <GIC_PPI 4 0xff08>,
-			     <GIC_PPI 1 0xff08>;
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	vph_pwr: vph-pwr-regulator {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
index 38035e0db80b..63ab564655bc 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
@@ -288,15 +288,15 @@
 	#size-cells = <0>;
 
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -492,6 +492,11 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
+		vreg_lvs2a: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
index dfe75119b8d2..220eeb31fdc7 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
@@ -41,6 +41,8 @@
 
 &slpi_pil {
 	firmware-name = "qcom/msm8996/oneplus3/slpi.mbn";
+	px-supply = <&vreg_lvs2a>;
+
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
index 51fce65e89f1..f772618e80c7 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
@@ -42,6 +42,8 @@
 
 &slpi_pil {
 	firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn";
+	px-supply = <&vreg_lvs2a>;
+
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 5ab583be9e0a..0386636a29f0 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -405,7 +405,6 @@
 
 &hsusb_phy1 {
 	status = "okay";
-	extcon = <&typec>;
 
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index f8e9d90afab0..bd3f39e1b98f 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -64,7 +64,7 @@
 		};
 
 		led@1 {
-			reg = <0>;
+			reg = <1>;
 			chan-name = "button-backlight1";
 			led-cur = /bits/ 8 <0x32>;
 			max-cur = /bits/ 8 <0xc8>;
@@ -137,15 +137,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -156,10 +156,7 @@
 &sound {
 	compatible = "qcom,apq8096-sndcard";
 	model = "gemini";
-	audio-routing = "RX_BIAS", "MCLK",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
+	audio-routing = "RX_BIAS", "MCLK";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 6ba9da9e6a8b..c75b522f6eba 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8996.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -43,90 +44,90 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
 			capacity-dmips-mhz = <1024>;
 			clocks = <&kryocc 0>;
 			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
 			operating-points-v2 = <&cluster0_opp>;
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
+			next-level-cache = <&l2_0>;
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
 			capacity-dmips-mhz = <1024>;
 			clocks = <&kryocc 0>;
 			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
 			operating-points-v2 = <&cluster0_opp>;
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU2: cpu@100 {
+		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
 			capacity-dmips-mhz = <1024>;
 			clocks = <&kryocc 1>;
 			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
 			operating-points-v2 = <&cluster1_opp>;
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
+			next-level-cache = <&l2_1>;
+			l2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU3: cpu@101 {
+		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
 			capacity-dmips-mhz = <1024>;
 			clocks = <&kryocc 1>;
 			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
 			operating-points-v2 = <&cluster1_opp>;
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 			};
 
 			cluster1 {
 				core0 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core1 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 			};
 		};
@@ -134,7 +135,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			CPU_SLEEP_0: cpu-sleep-0 {
+			cpu_sleep_0: cpu-sleep-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "standalone-power-collapse";
 				arm,psci-suspend-param = <0x00000004>;
@@ -444,6 +445,19 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	etm {
+		compatible = "qcom,coresight-remote-etm";
+
+		out-ports {
+			port {
+				modem_etm_out_funnel_in2: endpoint {
+					remote-endpoint =
+					  <&funnel_in2_in_modem_etm>;
+				};
+			};
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -459,7 +473,7 @@
 			mboxes = <&apcs_glb 0>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8996";
+				compatible = "qcom,rpm-msm8996", "qcom,glink-smd-rpm";
 				qcom,glink-channels = "rpm_requests";
 
 				rpmcc: clock-controller {
@@ -743,12 +757,12 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			qusb2p_hstx_trim: hstx_trim@24e {
+			qusb2p_hstx_trim: hstx-trim@24e {
 				reg = <0x24e 0x2>;
 				bits = <5 4>;
 			};
 
-			qusb2s_hstx_trim: hstx_trim@24f {
+			qusb2s_hstx_trim: hstx-trim@24f {
 				reg = <0x24f 0x1>;
 				bits = <1 4>;
 			};
@@ -779,10 +793,10 @@
 				 <&pciephy_0>,
 				 <&pciephy_1>,
 				 <&pciephy_2>,
-				 <&ssusb_phy_0>,
-				 <&ufsphy_lane 0>,
-				 <&ufsphy_lane 1>,
-				 <&ufsphy_lane 2>;
+				 <&usb3phy>,
+				 <&ufsphy 0>,
+				 <&ufsphy 1>,
+				 <&ufsphy 2>;
 			clock-names = "cxo",
 				      "cxo2",
 				      "sleep_clk",
@@ -799,9 +813,6 @@
 			compatible = "qcom,msm8996-bimc";
 			reg = <0x00408000 0x5a000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens0: thermal-sensor@4a9000 {
@@ -852,18 +863,12 @@
 			compatible = "qcom,msm8996-cnoc";
 			reg = <0x00500000 0x1000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		snoc: interconnect@524000 {
 			compatible = "qcom,msm8996-snoc";
 			reg = <0x00524000 0x1c000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		a0noc: interconnect@543000 {
@@ -883,19 +888,14 @@
 			compatible = "qcom,msm8996-a1noc";
 			reg = <0x00562000 0x5000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
 		};
 
 		a2noc: interconnect@583000 {
 			compatible = "qcom,msm8996-a2noc";
 			reg = <0x00583000 0x7000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+			clock-names = "aggre2_ufs_axi", "ufs_axi";
+			clocks = <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				 <&gcc GCC_UFS_AXI_CLK>;
 		};
 
@@ -903,19 +903,14 @@
 			compatible = "qcom,msm8996-mnoc";
 			reg = <0x005a4000 0x1c000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "iface";
-			clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
-				 <&rpmcc RPM_SMD_MMAXI_A_CLK>,
-				 <&mmcc AHB_CLK_SRC>;
+			clock-names = "iface";
+			clocks = <&mmcc AHB_CLK_SRC>;
 		};
 
 		pnoc: interconnect@5c0000 {
 			compatible = "qcom,msm8996-pnoc";
 			reg = <0x005c0000 0x3000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
 		tcsr_mutex: hwlock@740000 {
@@ -943,10 +938,10 @@
 			clocks = <&xo_board>,
 				 <&gcc GPLL0>,
 				 <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
 				 <&mdss_hdmi_phy>;
 			clock-names = "xo",
 				      "gpll0",
@@ -988,6 +983,8 @@
 				 <&mmcc MDSS_MDP_CLK>;
 			clock-names = "iface", "core";
 
+			resets = <&mmcc MDSS_BCR>;
+
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1075,8 +1072,10 @@
 					      "core_mmss",
 					      "pixel",
 					      "core";
-				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi0_phy>;
 				status = "disabled";
@@ -1143,8 +1142,10 @@
 					      "core_mmss",
 					      "pixel",
 					      "core";
-				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+						  <&mmcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi1_phy>;
 				status = "disabled";
@@ -1909,14 +1910,28 @@
 
 				device_type = "pci";
 
-				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
+				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi0",
+						  "msi1",
+						  "msi2",
+						  "msi3",
+						  "msi4",
+						  "msi5",
+						  "msi6",
+						  "msi7";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+				interrupt-map = <0 0 0 1 &intc GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 				pinctrl-names = "default", "sleep";
 				pinctrl-0 = <&pcie0_state_on>;
@@ -1935,6 +1950,16 @@
 						"cfg",
 						"bus_master",
 						"bus_slave";
+
+				pcie@0 {
+					device_type = "pci";
+					reg = <0x0 0x0 0x0 0x0 0x0>;
+					bus-range = <0x01 0xff>;
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+				};
 			};
 
 			pcie1: pcie@608000 {
@@ -1962,14 +1987,28 @@
 
 				device_type = "pci";
 
-				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
+				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi0",
+						  "msi1",
+						  "msi2",
+						  "msi3",
+						  "msi4",
+						  "msi5",
+						  "msi6",
+						  "msi7";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+				interrupt-map = <0 0 0 1 &intc GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 				pinctrl-names = "default", "sleep";
 				pinctrl-0 = <&pcie1_state_on>;
@@ -1988,6 +2027,16 @@
 						"cfg",
 						"bus_master",
 						"bus_slave";
+
+				pcie@0 {
+					device_type = "pci";
+					reg = <0x0 0x0 0x0 0x0 0x0>;
+					bus-range = <0x01 0xff>;
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+				};
 			};
 
 			pcie2: pcie@610000 {
@@ -2013,14 +2062,28 @@
 
 				device_type = "pci";
 
-				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
+				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi0",
+						  "msi1",
+						  "msi2",
+						  "msi3",
+						  "msi4",
+						  "msi5",
+						  "msi6",
+						  "msi7";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+				interrupt-map = <0 0 0 1 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 				pinctrl-names = "default", "sleep";
 				pinctrl-0 = <&pcie2_state_on>;
@@ -2038,6 +2101,16 @@
 						"cfg",
 						"bus_master",
 						"bus_slave";
+
+				pcie@0 {
+					device_type = "pci";
+					reg = <0x0 0x0 0x0 0x0 0x0>;
+					bus-range = <0x01 0xff>;
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+				};
 			};
 		};
 
@@ -2047,30 +2120,26 @@
 			reg = <0x00624000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 
-			phys = <&ufsphy_lane>;
+			phys = <&ufsphy>;
 			phy-names = "ufsphy";
 
 			power-domains = <&gcc UFS_GDSC>;
 
 			clock-names =
-				"core_clk_src",
 				"core_clk",
 				"bus_clk",
 				"bus_aggr_clk",
 				"iface_clk",
-				"core_clk_unipro_src",
 				"core_clk_unipro",
 				"core_clk_ice",
 				"ref_clk",
 				"tx_lane0_sync_clk",
 				"rx_lane0_sync_clk";
 			clocks =
-				<&gcc UFS_AXI_CLK_SRC>,
 				<&gcc GCC_UFS_AXI_CLK>,
 				<&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
 				<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				<&gcc GCC_UFS_AHB_CLK>,
-				<&gcc UFS_ICE_CORE_CLK_SRC>,
 				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
 				<&gcc GCC_UFS_ICE_CORE_CLK>,
 				<&rpmcc RPM_SMD_LN_BB_CLK>,
@@ -2081,12 +2150,10 @@
 				<0 0>,
 				<0 0>,
 				<0 0>,
-				<0 0>,
+				<75000000 150000000>,
 				<150000000 300000000>,
 				<0 0>,
 				<0 0>,
-				<0 0>,
-				<0 0>,
 				<0 0>;
 
 			interconnects = <&a2noc MASTER_UFS &bimc SLAVE_EBI_CH0>,
@@ -2100,25 +2167,18 @@
 
 		ufsphy: phy@627000 {
 			compatible = "qcom,msm8996-qmp-ufs-phy";
-			reg = <0x00627000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00627000 0x1000>;
 
-			clocks = <&gcc GCC_UFS_CLKREF_CLK>;
-			clock-names = "ref";
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_CLKREF_CLK>;
+			clock-names = "ref", "qref";
 
 			resets = <&ufshc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufsphy_lane: phy@627400 {
-				reg = <0x627400 0x12c>,
-				      <0x627600 0x200>,
-				      <0x627c00 0x1b4>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		camss: camss@a34000 {
@@ -2453,9 +2513,8 @@
 					  "handover",
 					  "stop-ack";
 
-			clocks = <&xo_board>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "xo", "aggre2";
+			clocks = <&xo_board>;
+			clock-names = "xo";
 
 			memory-region = <&slpi_mem>;
 
@@ -2467,6 +2526,13 @@
 
 			status = "disabled";
 
+			glink-edge {
+				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apcs_glb 27>;
+			};
+
 			smd-edge {
 				interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
 
@@ -2500,10 +2566,15 @@
 				 <&gcc GCC_MSS_GPLL0_DIV_CLK>,
 				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
 				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_CLK>,
 				 <&rpmcc RPM_SMD_QDSS_CLK>;
-			clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
-				      "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+			clock-names = "iface",
+				      "bus",
+				      "mem",
+				      "xo",
+				      "gpll0_mss",
+				      "snoc_axi",
+				      "mnoc_axi",
+				      "qdss";
 
 			resets = <&gcc GCC_MSS_RESTART>;
 			reset-names = "mss_restart";
@@ -2531,6 +2602,13 @@
 				memory-region = <&mdata_mem>;
 			};
 
+			glink-edge {
+				interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 15>;
+			};
+
 			smd-edge {
 				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
 
@@ -2644,6 +2722,14 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
+			in-ports {
+				port {
+					funnel_in2_in_modem_etm: endpoint {
+						remote-endpoint =
+						  <&modem_etm_out_funnel_in2>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
@@ -2790,7 +2876,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 		};
 
 		etm@3840000 {
@@ -2800,7 +2886,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 
 			out-ports {
 				port {
@@ -2819,7 +2905,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 		};
 
 		etm@3940000 {
@@ -2829,7 +2915,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 
 			out-ports {
 				port {
@@ -2884,7 +2970,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 		};
 
 		etm@3a40000 {
@@ -2894,7 +2980,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 
 			out-ports {
 				port {
@@ -2913,7 +2999,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 		};
 
 		etm@3b40000 {
@@ -2923,7 +3009,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 
 			out-ports {
 				port {
@@ -3026,9 +3112,14 @@
 			#size-cells = <1>;
 			ranges;
 
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_MASTER_CLK>,
@@ -3056,44 +3147,39 @@
 				compatible = "snps,dwc3";
 				reg = <0x06a00000 0xcc00>;
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+				phys = <&hsusb_phy1>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,hird-threshold = /bits/ 8 <0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,is-utmi-l1-suspend;
+				snps,parkmode-disable-ss-quirk;
 				tx-fifo-resize;
 			};
 		};
 
 		usb3phy: phy@7410000 {
 			compatible = "qcom,msm8996-qmp-usb3-phy";
-			reg = <0x07410000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x07410000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
-				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_CLKREF_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
-				<&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			ssusb_phy_0: phy@7410200 {
-				reg = <0x07410200 0x200>,
-				      <0x07410400 0x130>,
-				      <0x07410600 0x1a8>;
-				#phy-cells = <0>;
-
-				#clock-cells = <0>;
-				clock-output-names = "usb3_phy_pipe_clk_src";
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-			};
+			status = "disabled";
 		};
 
 		hsusb_phy1: phy@7411000 {
@@ -3388,8 +3474,12 @@
 			#size-cells = <1>;
 			ranges;
 
-			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq";
 
 			clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
 				<&gcc GCC_USB20_MASTER_CLK>,
@@ -3470,6 +3560,14 @@
 
 			status = "disabled";
 
+			glink-edge {
+				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 9>;
+			};
+
+
 			smd-edge {
 				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 
@@ -3526,6 +3624,63 @@
 						};
 					};
 				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,smd-channels = "fastrpcsmd-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&lpass_q6_smmu 5>;
+					};
+
+					cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&lpass_q6_smmu 6>;
+					};
+
+					cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&lpass_q6_smmu 7>;
+					};
+
+					cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&lpass_q6_smmu 8>;
+					};
+
+					cb@9 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <9>;
+						iommus = <&lpass_q6_smmu 9>;
+					};
+
+					cb@10 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <10>;
+						iommus = <&lpass_q6_smmu 10>;
+					};
+
+					cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&lpass_q6_smmu 11>;
+					};
+
+					cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&lpass_q6_smmu 12>;
+					};
+				};
 			};
 		};
 
@@ -3611,6 +3766,7 @@
 
 		intc: interrupt-controller@9bc0000 {
 			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
@@ -3627,7 +3783,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -3648,7 +3803,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -3669,7 +3823,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -3690,7 +3843,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -3711,7 +3863,6 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -3733,7 +3884,6 @@
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -3755,7 +3905,6 @@
 
 		m4m-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -3770,7 +3919,6 @@
 
 		l3-or-venus-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -3785,7 +3933,6 @@
 
 		cluster0-l2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -3800,7 +3947,6 @@
 
 		cluster1-l2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -3815,7 +3961,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -3830,7 +3975,6 @@
 
 		q6-dsp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -3845,7 +3989,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -3860,7 +4003,6 @@
 
 		modemtx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
index 5e3fd1637f44..443599a5a5dd 100644
--- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
@@ -87,15 +87,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
index 5e3b9130e9c2..33d84ac541e1 100644
--- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
@@ -139,15 +139,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 3b7172aa4037..157c4f04564b 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -61,36 +61,36 @@
  * not advertised as enabled in ACPI, and enabling it in DT can cause boot
  * hangs.
  */
-&CPU0 {
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+&cpu0 {
+	cpu-idle-states = <&little_cpu_sleep_1>;
 };
 
-&CPU1 {
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+&cpu1 {
+	cpu-idle-states = <&little_cpu_sleep_1>;
 };
 
-&CPU2 {
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+&cpu2 {
+	cpu-idle-states = <&little_cpu_sleep_1>;
 };
 
-&CPU3 {
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+&cpu3 {
+	cpu-idle-states = <&little_cpu_sleep_1>;
 };
 
-&CPU4 {
-	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+&cpu4 {
+	cpu-idle-states = <&big_cpu_sleep_1>;
 };
 
-&CPU5 {
-	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+&cpu5 {
+	cpu-idle-states = <&big_cpu_sleep_1>;
 };
 
-&CPU6 {
-	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+&cpu6 {
+	cpu-idle-states = <&big_cpu_sleep_1>;
 };
 
-&CPU7 {
-	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+&cpu7 {
+	cpu-idle-states = <&big_cpu_sleep_1>;
 };
 
 /*
@@ -128,6 +128,12 @@
 	};
 };
 
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
 &qusb2phy {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index f1ceaedd9520..f5558495cb02 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -372,6 +372,7 @@
 &qusb2phy {
 	status = "okay";
 
+	vdd-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
index a105143bee4a..c11b972771c3 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
@@ -3,12 +3,45 @@
 
 /dts-v1/;
 
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include "msm8998-clamshell.dtsi"
 
 / {
 	model = "Lenovo Miix 630";
 	compatible = "lenovo,miix-630", "qcom,msm8998";
 	chassis-type = "convertible";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-0 = <&vol_up_pin_a>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&i2c5_hid_active>;
+		pinctrl-names = "default";
+	};
 };
 
 &blsp1_i2c6 {
@@ -27,11 +60,52 @@
 	};
 };
 
+&pm8998_gpios {
+	vol_up_pin_a: vol-up-active-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/msm8998/LENOVO/81F1/qcadsp8998.mbn";
+
+	status = "okay";
+};
+
 &remoteproc_mss {
 	firmware-name = "qcom/msm8998/LENOVO/81F1/qcdsp1v28998.mbn",
 			"qcom/msm8998/LENOVO/81F1/qcdsp28998.mbn";
 };
 
+&remoteproc_slpi {
+	firmware-name = "qcom/msm8998/LENOVO/81F1/qcslpi8998.mbn";
+
+	status = "okay";
+};
+
 &sdhc2 {
 	cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
 };
+
+&tlmm {
+	i2c5_hid_active: i2c5-hid-active-state {
+		pins = "gpio125";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
+
+&venus {
+	firmware-name = "qcom/msm8998/LENOVO/81F1/qcvss8998.mbn";
+
+	status = "okay";
+};
+
+&wifi {
+	qcom,calibration-variant = "Lenovo_Miix630";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
index 7c77612fb990..ad425267e902 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
@@ -156,6 +156,7 @@
 &qusb2phy {
 	status = "okay";
 
+	vdd-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 876c6921ddf0..3650f2501886 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -98,30 +98,35 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "Side buttons";
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>;
-		button-vol-down {
-			label = "Volume Down";
-			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
+		button-camera-focus {
+			label = "Camera Focus";
+			gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA_FOCUS>;
 			debounce-interval = <15>;
 		};
 
 		button-camera-snapshot {
 			label = "Camera Snapshot";
 			gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_CAMERA>;
 			debounce-interval = <15>;
 		};
 
-		button-camera-focus {
-			label = "Camera Focus";
-			gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_CAMERA_FOCUS>;
+		button-vol-down {
+			label = "Volume Down";
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
 			debounce-interval = <15>;
 		};
 	};
@@ -345,6 +350,14 @@
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 	};
 
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
 	focus_n: focus-n-state {
 		pins = "gpio7";
 		function = PMIC_GPIO_FUNC_NORMAL;
@@ -405,14 +418,39 @@
 	};
 };
 
-&pm8998_resin {
-	linux,code = <KEY_VOLUMEUP>;
+&pmi8998_lpg {
+	qcom,power-source = <1>;
+
 	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@4 {
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
 };
 
 &qusb2phy {
 	status = "okay";
 
+	vdd-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index b485bf925ce6..5c75fba16ce2 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -2,6 +2,7 @@
 /* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8998.h>
 #include <dt-bindings/clock/qcom,gpucc-msm8998.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
@@ -136,130 +137,130 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo280";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
+			cpu-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+			next-level-cache = <&l2_0>;
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "qcom,kryo280";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
-			next-level-cache = <&L2_0>;
+			cpu-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "qcom,kryo280";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
-			next-level-cache = <&L2_0>;
+			cpu-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "qcom,kryo280";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
-			next-level-cache = <&L2_0>;
+			cpu-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU4: cpu@100 {
+		cpu4: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo280";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1536>;
-			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			next-level-cache = <&l2_1>;
+			l2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU5: cpu@101 {
+		cpu5: cpu@101 {
 			device_type = "cpu";
 			compatible = "qcom,kryo280";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1536>;
-			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
-			next-level-cache = <&L2_1>;
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			next-level-cache = <&l2_1>;
 		};
 
-		CPU6: cpu@102 {
+		cpu6: cpu@102 {
 			device_type = "cpu";
 			compatible = "qcom,kryo280";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1536>;
-			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
-			next-level-cache = <&L2_1>;
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			next-level-cache = <&l2_1>;
 		};
 
-		CPU7: cpu@103 {
+		cpu7: cpu@103 {
 			device_type = "cpu";
 			compatible = "qcom,kryo280";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1536>;
-			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
-			next-level-cache = <&L2_1>;
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			next-level-cache = <&l2_1>;
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 			};
 
 			cluster1 {
 				core0 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core1 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core2 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core3 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -267,7 +268,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-retention";
 				/* CPU Retention (C2D), L2 Active */
@@ -277,7 +278,7 @@
 				min-residency-us = <504>;
 			};
 
-			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+			little_cpu_sleep_1: cpu-sleep-0-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-power-collapse";
 				/* CPU + L2 Power Collapse (C3, D4) */
@@ -288,7 +289,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-retention";
 				/* CPU Retention (C2D), L2 Active */
@@ -298,7 +299,7 @@
 				min-residency-us = <1302>;
 			};
 
-			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+			big_cpu_sleep_1: cpu-sleep-1-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-power-collapse";
 				/* CPU + L2 Power Collapse (C3, D4) */
@@ -352,7 +353,7 @@
 			mboxes = <&apcs_glb 0>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8998";
+				compatible = "qcom,rpm-msm8998", "qcom,glink-smd-rpm";
 				qcom,glink-channels = "rpm_requests";
 
 				rpmcc: clock-controller {
@@ -488,7 +489,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -509,7 +509,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -530,7 +529,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -551,7 +549,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -572,7 +569,6 @@
 
 		cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -593,7 +589,6 @@
 
 		cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -614,7 +609,6 @@
 
 		cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -635,7 +629,6 @@
 
 		cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -656,7 +649,6 @@
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -671,7 +663,6 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -686,7 +677,6 @@
 
 		clust0-mhm-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -701,7 +691,6 @@
 
 		clust1-mhm-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -716,7 +705,6 @@
 
 		cluster1-l2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -731,7 +719,6 @@
 
 		modem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -746,7 +733,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -761,7 +747,6 @@
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -776,7 +761,6 @@
 
 		q6-dsp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -791,7 +775,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -806,7 +789,6 @@
 
 		multimedia-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -933,7 +915,7 @@
 				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
 			reg = <0x01c00000 0x2000>,
 			      <0x1b000000 0xf1d>,
@@ -954,8 +936,24 @@
 				 <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
 
 			#interrupt-cells = <1>;
-			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>,
 					<0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>,
@@ -972,6 +970,16 @@
 			power-domains = <&gcc PCIE_0_GDSC>;
 			iommu-map = <0x100 &anoc1_smmu 0x1480 1>;
 			perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie_phy: phy@1c06000 {
@@ -1004,7 +1012,7 @@
 			compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x01da4000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufsphy_lanes>;
+			phys = <&ufsphy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_GDSC>;
@@ -1045,30 +1053,20 @@
 
 		ufsphy: phy@1da7000 {
 			compatible = "qcom,msm8998-qmp-ufs-phy";
-			reg = <0x01da7000 0x18c>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges;
+			reg = <0x01da7000 0x1000>;
 
-			clock-names =
-				"ref",
-				"ref_aux";
-			clocks =
-				<&gcc GCC_UFS_CLKREF_CLK>,
-				<&gcc GCC_UFS_PHY_AUX_CLK>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK1>,
+				 <&gcc GCC_UFS_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_CLKREF_CLK>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 
 			reset-names = "ufsphy";
 			resets = <&ufshc 0>;
 
-			ufsphy_lanes: phy@1da7400 {
-				reg = <0x01da7400 0x128>,
-				      <0x01da7600 0x1fc>,
-				      <0x01da7c00 0x1dc>,
-				      <0x01da7800 0x128>,
-				      <0x01da7a00 0x1fc>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		tcsr_mutex: hwlock@1f40000 {
@@ -1082,6 +1080,11 @@
 			reg = <0x01f60000 0x20000>;
 		};
 
+		tcsr_regs_2: syscon@1fc0000 {
+			compatible = "qcom,msm8998-tcsr", "syscon";
+			reg = <0x01fc0000 0x26000>;
+		};
+
 		tlmm: pinctrl@3400000 {
 			compatible = "qcom,msm8998-pinctrl";
 			reg = <0x03400000 0xc00000>;
@@ -1429,6 +1432,34 @@
 				drive-strength = <6>;
 				bias-disable;
 			};
+
+			hdmi_cec_default: hdmi-cec-default-state {
+				pins = "gpio31";
+				function = "hdmi_cec";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hdmi_ddc_default: hdmi-ddc-default-state {
+				pins = "gpio32", "gpio33";
+				function = "hdmi_ddc";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hdmi_hpd_default: hdmi-hpd-default-state {
+				pins = "gpio34";
+				function = "hdmi_hot";
+				drive-strength = <16>;
+				bias-pull-down;
+			};
+
+			hdmi_hpd_sleep: hdmi-hpd-sleep-state {
+				pins = "gpio34";
+				function = "hdmi_hot";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
 		};
 
 		remoteproc_mss: remoteproc@4080000 {
@@ -1585,7 +1616,6 @@
 			 * SoC VDDMX RPM Power Domain in the Adreno driver.
 			 */
 			power-domains = <&gpucc GPU_GX_GDSC>;
-			status = "disabled";
 		};
 
 		gpucc: clock-controller@5065000 {
@@ -1601,6 +1631,33 @@
 				      "gpll0";
 		};
 
+		lpass_q6_smmu: iommu@5100000 {
+			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+			reg = <0x05100000 0x40000>;
+			clocks = <&gcc HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
+			clock-names = "bus";
+
+			#global-interrupts = <0>;
+			#iommu-cells = <1>;
+			interrupts =
+				<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&gcc LPASS_ADSP_GDSC>;
+			status = "disabled";
+		};
+
 		remoteproc_slpi: remoteproc@5800000 {
 			compatible = "qcom,msm8998-slpi-pas";
 			reg = <0x05800000 0x4040>;
@@ -1615,9 +1672,8 @@
 
 			px-supply = <&vreg_lvs2a_1p8>;
 
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "xo", "aggre2";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
 
 			memory-region = <&slpi_mem>;
 
@@ -1835,7 +1891,7 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 
 			out-ports {
 				port {
@@ -1855,7 +1911,7 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 
 			out-ports {
 				port {
@@ -1875,7 +1931,7 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 
 			out-ports {
 				port {
@@ -1895,7 +1951,7 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 
 			out-ports {
 				port {
@@ -2029,11 +2085,13 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU4>;
+			cpu = <&cpu4>;
 
-			port {
-				etm4_out: endpoint {
-					remote-endpoint = <&apss_funnel_in4>;
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
 				};
 			};
 		};
@@ -2046,11 +2104,13 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU5>;
+			cpu = <&cpu5>;
 
-			port {
-				etm5_out: endpoint {
-					remote-endpoint = <&apss_funnel_in5>;
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
 				};
 			};
 		};
@@ -2063,11 +2123,13 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU6>;
+			cpu = <&cpu6>;
 
-			port {
-				etm6_out: endpoint {
-					remote-endpoint = <&apss_funnel_in6>;
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
 				};
 			};
 		};
@@ -2080,11 +2142,13 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU7>;
+			cpu = <&cpu7>;
 
-			port {
-				etm7_out: endpoint {
-					remote-endpoint = <&apss_funnel_in7>;
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
 				};
 			};
 		};
@@ -2135,9 +2199,12 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <120000000>;
 
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB_30_GDSC>;
 
@@ -2149,7 +2216,8 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&qusb2phy>, <&usb1_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -2158,33 +2226,28 @@
 
 		usb3phy: phy@c010000 {
 			compatible = "qcom,msm8998-qmp-usb3-phy";
-			reg = <0x0c010000 0x18c>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x0c010000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@c010200 {
-				reg = <0xc010200 0x128>,
-				      <0xc010400 0x200>,
-				      <0xc010c00 0x20c>,
-				      <0xc010600 0x128>,
-				      <0xc010800 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			qcom,tcsr-reg = <&tcsr_regs_2 0xb244>;
+
+			status = "disabled";
 		};
 
 		qusb2phy: phy@c012000 {
@@ -2744,11 +2807,11 @@
 				      "gpll0_div";
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&gcc GCC_MMSS_GPLL0_CLK>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_hdmi_phy>,
 				 <0>,
 				 <0>,
 				 <&gcc GCC_MMSS_GPLL0_DIV_CLK>;
@@ -2783,8 +2846,8 @@
 				compatible = "qcom,msm8998-dpu";
 				reg = <0x0c901000 0x8f000>,
 				      <0x0c9a8e00 0xf0>,
-				      <0x0c9b0000 0x2008>,
-				      <0x0c9b8000 0x1040>;
+				      <0x0c9b0000 0x3000>,
+				      <0x0c9b8000 0x3000>;
 				reg-names = "mdp",
 					    "regdma",
 					    "vbif",
@@ -2853,6 +2916,14 @@
 							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf3_out: endpoint {
+							remote-endpoint = <&hdmi_in>;
+						};
+					};
 				};
 			};
 
@@ -2878,8 +2949,8 @@
 					      "bus";
 				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
 						  <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd MSM8998_VDDCX>;
@@ -2954,8 +3025,8 @@
 					      "bus";
 				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
 						  <&mmcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd MSM8998_VDDCX>;
@@ -3008,6 +3079,144 @@
 
 				status = "disabled";
 			};
+
+			mdss_hdmi: hdmi-tx@c9a0000 {
+				compatible = "qcom,hdmi-tx-8998";
+				reg = <0x0c9a0000 0x50c>,
+				      <0x00780000 0x6220>,
+				      <0x0c9e0000 0x2c>;
+				reg-names = "core_physical",
+					    "qfprom_physical",
+					    "hdcp_physical";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <8>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_HDMI_CLK>,
+					 <&mmcc MDSS_HDMI_DP_AHB_CLK>,
+					 <&mmcc MDSS_EXTPCLK_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MNOC_AHB_CLK>,
+					 <&mmcc MISC_AHB_CLK>;
+				clock-names =
+					"mdp_core",
+					"iface",
+					"core",
+					"alt_iface",
+					"extp",
+					"bus",
+					"mnoc",
+					"iface_mmss";
+
+				phys = <&mdss_hdmi_phy>;
+				#sound-dai-cells = <1>;
+
+				pinctrl-0 = <&hdmi_hpd_default>,
+					    <&hdmi_ddc_default>,
+					    <&hdmi_cec_default>;
+				pinctrl-1 = <&hdmi_hpd_sleep>,
+					    <&hdmi_ddc_default>,
+					    <&hdmi_cec_default>;
+				pinctrl-names = "default", "sleep";
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						hdmi_in: endpoint {
+							remote-endpoint = <&dpu_intf3_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						hdmi_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_hdmi_phy: hdmi-phy@c9a0600 {
+				compatible = "qcom,hdmi-phy-8998";
+				reg = <0x0c9a0600 0x18b>,
+				      <0x0c9a0a00 0x38>,
+				      <0x0c9a0c00 0x38>,
+				      <0x0c9a0e00 0x38>,
+				      <0x0c9a1000 0x38>,
+				      <0x0c9a1200 0x0e8>;
+				reg-names = "hdmi_pll",
+					    "hdmi_tx_l0",
+					    "hdmi_tx_l1",
+					    "hdmi_tx_l2",
+					    "hdmi_tx_l3",
+					    "hdmi_phy";
+
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&gcc GCC_HDMI_CLKREF_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref",
+					      "xo";
+
+				status = "disabled";
+			};
+		};
+
+		venus: video-codec@cc00000 {
+			compatible = "qcom,msm8998-venus";
+			reg = <0x0cc00000 0xff000>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc VIDEO_TOP_GDSC>;
+			clocks = <&mmcc VIDEO_CORE_CLK>,
+				 <&mmcc VIDEO_AHB_CLK>,
+				 <&mmcc VIDEO_AXI_CLK>,
+				 <&mmcc VIDEO_MAXI_CLK>;
+			clock-names = "core", "iface", "bus", "mbus";
+			iommus = <&mmss_smmu 0x400>,
+				 <&mmss_smmu 0x401>,
+				 <&mmss_smmu 0x40a>,
+				 <&mmss_smmu 0x407>,
+				 <&mmss_smmu 0x40e>,
+				 <&mmss_smmu 0x40f>,
+				 <&mmss_smmu 0x408>,
+				 <&mmss_smmu 0x409>,
+				 <&mmss_smmu 0x40b>,
+				 <&mmss_smmu 0x40c>,
+				 <&mmss_smmu 0x40d>,
+				 <&mmss_smmu 0x410>,
+				 <&mmss_smmu 0x421>,
+				 <&mmss_smmu 0x428>,
+				 <&mmss_smmu 0x429>,
+				 <&mmss_smmu 0x42b>,
+				 <&mmss_smmu 0x42c>,
+				 <&mmss_smmu 0x42d>,
+				 <&mmss_smmu 0x411>,
+				 <&mmss_smmu 0x431>;
+			memory-region = <&venus_mem>;
+			status = "disabled";
+
+			video-decoder {
+				compatible = "venus-decoder";
+				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+				clock-names = "core";
+				power-domains = <&mmcc VIDEO_SUBCORE0_GDSC>;
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+				clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+				clock-names = "core";
+				power-domains = <&mmcc VIDEO_SUBCORE1_GDSC>;
+			};
 		};
 
 		mmss_smmu: iommu@cd00000 {
@@ -3185,6 +3394,7 @@
 			iommus = <&anoc2_smmu 0x1900>,
 				 <&anoc2_smmu 0x1901>;
 			qcom,snoc-host-cap-8bit-quirk;
+			qcom,no-msa-ready-indicator;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/pm2250.dtsi b/arch/arm64/boot/dts/qcom/pm4125.dtsi
index 5f1d15db5c99..cf8c822e80ce 100644
--- a/arch/arm64/boot/dts/qcom/pm2250.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm4125.dtsi
@@ -19,7 +19,7 @@
 			compatible = "qcom,pm8916-pon";
 			reg = <0x800>;
 
-			pm2250_pwrkey: pwrkey {
+			pm4125_pwrkey: pwrkey {
 				compatible = "qcom,pm8941-pwrkey";
 				interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 				linux,code = <KEY_POWER>;
@@ -27,7 +27,7 @@
 				bias-pull-up;
 			};
 
-			pm2250_resin: resin {
+			pm4125_resin: resin {
 				compatible = "qcom,pm8941-resin";
 				interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
 				debounce = <15625>;
@@ -36,6 +36,36 @@
 			};
 		};
 
+		pm4125_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pm4125-vbus-reg", "qcom,pm8150b-vbus-reg";
+			reg = <0x1100>;
+			status = "disabled";
+		};
+
+		pm4125_typec: typec@1500 {
+			compatible = "qcom,pm4125-typec", "qcom,pmi632-typec";
+			reg = <0x1500>;
+			interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "or-rid-detect-change",
+					  "vpd-detect",
+					  "cc-state-change",
+					  "vconn-oc",
+					  "vbus-change",
+					  "attach-detach",
+					  "legacy-cable-detect",
+					  "try-snk-src-detect";
+			vdd-vbus-supply = <&pm4125_vbus>;
+
+			status = "disabled";
+		};
+
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>, <0x6100>;
@@ -43,11 +73,11 @@
 			interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pm2250_gpios: gpio@c000 {
+		pm4125_gpios: gpio@c000 {
 			compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm2250_gpios 0 0 10>;
+			gpio-ranges = <&pm4125_gpios 0 0 10>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi
index 99369a0cdb61..d0db28336fa9 100644
--- a/arch/arm64/boot/dts/qcom/pm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm6125-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm6125_temp>;
 
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
index ddbaf7280b03..59524609fb1e 100644
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -13,7 +13,7 @@
 	thermal-zones {
 		pm6150_thermal: pm6150-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm6150_temp>;
 
 			trips {
@@ -63,6 +63,52 @@
 			};
 		};
 
+		pm6150_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pm6150-vbus-reg",
+				     "qcom,pm8150b-vbus-reg";
+			reg = <0x1100>;
+			status = "disabled";
+		};
+
+		pm6150_typec: typec@1500 {
+			compatible = "qcom,pm6150-typec",
+				     "qcom,pm8150b-typec";
+			reg = <0x1500>, <0x1700>;
+			interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x01 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x03 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x06 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x07 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "or-rid-detect-change",
+					  "vpd-detect",
+					  "cc-state-change",
+					  "vconn-oc",
+					  "vbus-change",
+					  "attach-detach",
+					  "legacy-cable-detect",
+					  "try-snk-src-detect",
+					  "sig-tx",
+					  "sig-rx",
+					  "msg-tx",
+					  "msg-rx",
+					  "msg-tx-failed",
+					  "msg-tx-discarded",
+					  "msg-rx-discarded",
+					  "fr-swap";
+			status = "disabled";
+		};
+
 		pm6150_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
@@ -120,5 +166,11 @@
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pm6150_vib: vibrator@5300 {
+			compatible = "qcom,pm6150-vib", "qcom,pmi632-vib";
+			reg = <0x5300>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
index d13a1ab7c20b..334f976f1154 100644
--- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -10,9 +10,6 @@
 / {
 	thermal-zones {
 		pm6150l-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm6150l_temp>;
 
 			trips {
@@ -118,6 +115,16 @@
 			status = "disabled";
 		};
 
+		pm6150l_lpg: pwm {
+			compatible = "qcom,pm6150l-lpg", "qcom,pm8150l-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
 		pm6150l_wled: leds@d800 {
 			compatible = "qcom,pm6150l-wled";
 			reg = <0xd800>, <0xd900>;
diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi
index 3a2a841e83f1..a20ee2457101 100644
--- a/arch/arm64/boot/dts/qcom/pm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm6350-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm6350_temp>;
 
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
index 98dc04962fe3..156b2ddff0dc 100644
--- a/arch/arm64/boot/dts/qcom/pm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -13,7 +13,6 @@
 	thermal-zones {
 		pm660-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&pm660_temp>;
 
@@ -74,6 +73,23 @@
 			};
 		};
 
+		pm660_charger: charger@1000 {
+			compatible = "qcom,pm660-charger";
+			reg = <0x1000>;
+
+			interrupts = <0x0 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change";
+
+			io-channels = <&pm660_rradc 3>,
+				      <&pm660_rradc 4>;
+			io-channel-names = "usbin_i", "usbin_v";
+
+			status = "disabled";
+		};
+
 		pm660_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
@@ -181,6 +197,14 @@
 			};
 		};
 
+		pm660_rradc: adc@4500 {
+			compatible = "qcom,pm660-rradc";
+			reg = <0x4500>;
+			#io-channel-cells = <1>;
+
+			status = "disabled";
+		};
+
 		pm660_gpios: gpio@c000 {
 			compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
index 6fdbf507c262..3f8b9eafe164 100644
--- a/arch/arm64/boot/dts/qcom/pm660l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -13,7 +13,6 @@
 	thermal-zones {
 		pm660l-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&pm660l_temp>;
 
@@ -71,6 +70,12 @@
 			status = "disabled";
 		};
 
+		pm660l_flash: led-controller@d300 {
+			compatible = "qcom,pm660l-flash-led", "qcom,spmi-flash-led";
+			reg = <0xd300>;
+			status = "disabled";
+		};
+
 		pm660l_wled: leds@d800 {
 			compatible = "qcom,pm660l-wled";
 			reg = <0xd800>, <0xd900>;
diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
index df0afe82f250..0761e6b5fd8d 100644
--- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
@@ -11,7 +11,6 @@
 	thermal-zones {
 		pm7250b-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm7250b_temp>;
 
@@ -45,6 +44,52 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm7250b_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg";
+			reg = <0x1100>;
+			status = "disabled";
+		};
+
+		pm7250b_typec: typec@1500 {
+			compatible = "qcom,pm7250b-typec", "qcom,pm8150b-typec";
+			reg = <0x1500>,
+			      <0x1700>;
+			interrupts = <PM7250B_SID 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+				     <PM7250B_SID 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+				     <PM7250B_SID 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+				     <PM7250B_SID 0x15 0x07 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x01 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x03 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x06 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x07 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "or-rid-detect-change",
+					  "vpd-detect",
+					  "cc-state-change",
+					  "vconn-oc",
+					  "vbus-change",
+					  "attach-detach",
+					  "legacy-cable-detect",
+					  "try-snk-src-detect",
+					  "sig-tx",
+					  "sig-rx",
+					  "msg-tx",
+					  "msg-rx",
+					  "msg-tx-failed",
+					  "msg-tx-discarded",
+					  "msg-rx-discarded",
+					  "fr-swap";
+			vdd-vbus-supply = <&pm7250b_vbus>;
+			status = "disabled";
+		};
+
 		pm7250b_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
@@ -148,7 +193,7 @@
 			status = "disabled";
 		};
 
-		pm7250b_gpios: pinctrl@c000 {
+		pm7250b_gpios: gpio@c000 {
 			compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi
index d1c5476af5ee..6e29468505b2 100644
--- a/arch/arm64/boot/dts/qcom/pm7325.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi
@@ -35,7 +35,7 @@
 &thermal_zones {
 	pm7325_thermal: pm7325-thermal {
 		polling-delay-passive = <100>;
-		polling-delay = <0>;
+
 		thermal-sensors = <&pm7325_temp_alarm>;
 
 		trips {
diff --git a/arch/arm64/boot/dts/qcom/pm7550ba.dtsi b/arch/arm64/boot/dts/qcom/pm7550ba.dtsi
index 8b00ece987d1..853a1d83a7f0 100644
--- a/arch/arm64/boot/dts/qcom/pm7550ba.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm7550ba.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm7550ba-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm7550ba_temp_alarm>;
 
diff --git a/arch/arm64/boot/dts/qcom/pm8010.dtsi b/arch/arm64/boot/dts/qcom/pm8010.dtsi
index 0ea641e12209..ef330194946b 100644
--- a/arch/arm64/boot/dts/qcom/pm8010.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8010.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm8010-m-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8010_m_temp_alarm>;
 
@@ -31,7 +30,6 @@
 
 		pm8010-n-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8010_n_temp_alarm>;
 
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index 3ba3ba5d8fce..d2568686a098 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -13,7 +13,6 @@
 	thermal-zones {
 		pm8150-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8150_temp>;
 
@@ -50,8 +49,6 @@
 		pon: pon@800 {
 			compatible = "qcom,pm8998-pon";
 			reg = <0x0800>;
-			mode-bootloader = <0x2>;
-			mode-recovery = <0x1>;
 
 			pon_pwrkey: pwrkey {
 				compatible = "qcom,pm8941-pwrkey";
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 1aee3270ce7b..3f7b0b6a1d10 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -12,7 +12,6 @@
 	thermal-zones {
 		pm8150b-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8150b_temp>;
 
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index ac08a09c64c2..3911d6d0d2e2 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -12,7 +12,6 @@
 	thermal-zones {
 		pm8150l-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8150l_temp>;
 
diff --git a/arch/arm64/boot/dts/qcom/pm8350.dtsi b/arch/arm64/boot/dts/qcom/pm8350.dtsi
index 9ed9ba23e81e..cb55b23688d6 100644
--- a/arch/arm64/boot/dts/qcom/pm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350.dtsi
@@ -10,7 +10,7 @@
 	thermal-zones {
 		pm8350_thermal: pm8350-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm8350_temp_alarm>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/pm8350b.dtsi b/arch/arm64/boot/dts/qcom/pm8350b.dtsi
index 05c105898892..cf82f8a64a9b 100644
--- a/arch/arm64/boot/dts/qcom/pm8350b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350b.dtsi
@@ -10,7 +10,7 @@
 	thermal-zones {
 		pm8350b_thermal: pm8350b-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm8350b_temp_alarm>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
index aa74e21fe0dc..1a24e6439e36 100644
--- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
@@ -48,7 +48,7 @@
 	thermal-zones {
 		pm8350c_thermal: pm8350c-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm8350c_temp_alarm>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/pm8450.dtsi b/arch/arm64/boot/dts/qcom/pm8450.dtsi
index ae5bce3cf46e..decb8809fd36 100644
--- a/arch/arm64/boot/dts/qcom/pm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8450.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm8450-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8450_temp_alarm>;
 
diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
index db3d5c17a77d..896bcacb6490 100644
--- a/arch/arm64/boot/dts/qcom/pm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm8550-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550_temp_alarm>;
 
@@ -64,9 +63,6 @@
 
 		pm8550_pwm: pwm {
 			compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
 			#pwm-cells = <2>;
 
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
index 72609f31c890..74d23b8970f4 100644
--- a/arch/arm64/boot/dts/qcom/pm8550b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm8550b-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550b_temp_alarm>;
 
diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
index c47646a467be..9d4734eabf5a 100644
--- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm8550ve-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550ve_temp_alarm>;
 
@@ -33,16 +32,16 @@
 
 
 &spmi_bus {
-	pm8550ve: pmic@5 {
+	pm8550ve: pmic@PMK8550VE_SID {
 		compatible = "qcom,pm8550", "qcom,spmi-pmic";
-		reg = <0x5 SPMI_USID>;
+		reg = <PMK8550VE_SID SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		pm8550ve_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <PMK8550VE_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
index 97b1c18aa7d8..6426b431616b 100644
--- a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm8550vs-c-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550vs_c_temp_alarm>;
 
@@ -31,7 +30,6 @@
 
 		pm8550vs-d-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550vs_d_temp_alarm>;
 
@@ -52,7 +50,6 @@
 
 		pm8550vs-e-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550vs_e_temp_alarm>;
 
@@ -73,7 +70,6 @@
 
 		pm8550vs-g-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550vs_g_temp_alarm>;
 
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index f4de86787743..f8e4829ff7f7 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -4,8 +4,37 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
-&spmi_bus {
+/ {
+	thermal-zones {
+		pm8916-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8916_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
 
+&spmi_bus {
 	pm8916_0: pmic@0 {
 		compatible = "qcom,pm8916", "qcom,spmi-pmic";
 		reg = <0x0 SPMI_USID>;
@@ -41,6 +70,35 @@
 			};
 		};
 
+		pm8916_charger: charger@1000 {
+			compatible = "qcom,pm8916-lbc";
+			reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
+			reg-names = "chgr", "bat_if", "usb", "misc";
+
+			interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "vbat_det",
+					  "fast_chg",
+					  "chg_fail",
+					  "chg_done",
+					  "bat_pres",
+					  "temp_ok",
+					  "coarse_det",
+					  "usb_vbus",
+					  "chg_gone",
+					  "overtemp";
+
+			status = "disabled";
+		};
+
 		pm8916_usbin: usb-detect@1300 {
 			compatible = "qcom,pm8941-misc";
 			reg = <0x1300>;
@@ -91,6 +149,25 @@
 			};
 		};
 
+		pm8916_bms: battery@4000 {
+			compatible = "qcom,pm8916-bms-vm";
+			reg = <0x4000>;
+			interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "cv_leave",
+					  "cv_enter",
+					  "ocv_good",
+					  "ocv_thr",
+					  "fifo",
+					  "state_chg";
+
+			status = "disabled";
+		};
+
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>, <0x6100>;
diff --git a/arch/arm64/boot/dts/qcom/pm8937.dtsi b/arch/arm64/boot/dts/qcom/pm8937.dtsi
new file mode 100644
index 000000000000..77809c3534a7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8937.dtsi
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8937-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8937_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm8937", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pm8937_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8937_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm8937_gpios: gpio@c000 {
+			compatible = "qcom,pm8937-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8937_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8937_mpps: mpps@a000 {
+			compatible = "qcom,pm8937-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pm8937_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8937_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8937_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8937_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0 0x31 0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+			};
+
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+			};
+
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+			};
+
+			channel@c {
+				reg = <VADC_SPARE1>;
+			};
+
+			channel@e {
+				reg = <VADC_GND_REF>;
+			};
+
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8937", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8937_pwm: pwm {
+			compatible = "qcom,pm8937-pwm", "qcom,pm8916-pwm";
+
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pm8937_spmi_regulators: regulators {
+			compatible = "qcom,pm8937-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi
index f03095779de0..ed72c6101813 100644
--- a/arch/arm64/boot/dts/qcom/pm8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi
@@ -18,7 +18,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pon@800 {
+		pm8950_pon: pon@800 {
 			compatible = "qcom,pm8916-pon";
 			reg = <0x0800>;
 			mode-bootloader = <0x2>;
@@ -31,6 +31,14 @@
 				bias-pull-up;
 				linux,code = <KEY_POWER>;
 			};
+
+			pm8950_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
 		};
 
 		pm8950_temp: temp-alarm@2400 {
diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi
index 1067e141be6c..64258505f9ba 100644
--- a/arch/arm64/boot/dts/qcom/pm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi
@@ -9,9 +9,6 @@
 / {
 	thermal-zones {
 		pm8953-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm8953_temp>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index d44a95caf04a..353e4a6bd088 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -8,7 +8,6 @@
 	thermal-zones {
 		pm8994-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&pm8994_temp>;
 
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 3f82715392c6..3ecb330590e5 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -11,7 +11,6 @@
 	thermal-zones {
 		pm8998-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&pm8998_temp>;
 
diff --git a/arch/arm64/boot/dts/qcom/pmd8028.dtsi b/arch/arm64/boot/dts/qcom/pmd8028.dtsi
new file mode 100644
index 000000000000..a00913e28a4c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmd8028.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmd8028-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&pmd8028_temp_alarm>;
+
+			trips {
+				pmd8028_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pmd8028_trip1: trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				pmd8028_trip2: trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmd8028: pmic@4 {
+		compatible = "qcom,pmd8028", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmd8028_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmd8028_gpios: gpio@8800 {
+			compatible = "qcom,pmd8028-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmd8028_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
index 4eb79e0ce40a..8c899d148e46 100644
--- a/arch/arm64/boot/dts/qcom/pmi632.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
@@ -11,7 +11,6 @@
 	thermal-zones {
 		pmi632-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmi632_temp>;
 
@@ -45,6 +44,36 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmi632_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg";
+			reg = <0x1100>;
+			status = "disabled";
+		};
+
+		pmi632_typec: typec@1500 {
+			compatible = "qcom,pmi632-typec";
+			reg = <0x1500>;
+			interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "or-rid-detect-change",
+					  "vpd-detect",
+					  "cc-state-change",
+					  "vconn-oc",
+					  "vbus-change",
+					  "attach-detach",
+					  "legacy-cable-detect",
+					  "try-snk-src-detect";
+			vdd-vbus-supply = <&pmi632_vbus>;
+
+			status = "disabled";
+		};
+
 		pmi632_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
@@ -127,6 +156,11 @@
 			status = "disabled";
 		};
 
+		pmi632_pbs_client3: pbs@7400 {
+			compatible = "qcom,pmi632-pbs", "qcom,pbs";
+			reg = <0x7400>;
+		};
+
 		pmi632_sdam_7: nvram@b600 {
 			compatible = "qcom,spmi-sdam";
 			reg = <0xb600>;
@@ -155,11 +189,21 @@
 		pmi632_lpg: pwm {
 			compatible = "qcom,pmi632-lpg";
 
+			nvmem = <&pmi632_sdam_7>;
+			nvmem-names = "lpg_chan_sdam";
+			qcom,pbs = <&pmi632_pbs_client3>;
+
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#pwm-cells = <2>;
 
 			status = "disabled";
 		};
+
+		pmi632_vib: vibrator@5700 {
+			compatible = "qcom,pmi632-vib";
+			reg = <0x5700>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
index 1029f3b1bb9a..3d3b1cd97cc3 100644
--- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -84,6 +84,30 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		labibb {
+			compatible = "qcom,pmi8950-lab-ibb",
+				     "qcom,pmi8998-lab-ibb";
+
+			ibb: ibb {
+				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+					     <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-names = "sc-err", "ocp";
+			};
+
+			lab: lab {
+				interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+					     <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-names = "sc-err", "ocp";
+			};
+		};
+
+		pmi8950_pwm: pwm {
+			compatible = "qcom,pmi8950-pwm";
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
 		pmi8950_wled: leds@d800 {
 			compatible = "qcom,pmi8950-wled";
 			reg = <0xd800>, <0xd900>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index 36d6a1fb553a..9ee59e6d2cdb 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -57,8 +57,11 @@
 			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
 				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ovp", "short";
+			label = "backlight";
+
 			qcom,cabc;
 			qcom,external-pfet;
+
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/pmih0108.dtsi b/arch/arm64/boot/dts/qcom/pmih0108.dtsi
new file mode 100644
index 000000000000..1c875995d881
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmih0108.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmih0108-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&pmih0108_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmih0108: pmic@7 {
+		compatible = "qcom,pmih0108", "qcom,spmi-pmic";
+		reg = <0x7 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmih0108_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmih0108_gpios: gpio@8800 {
+			compatible = "qcom,pmih0108-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmih0108_gpios 0 0 18>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmih0108_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,pm8550b-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 1eb74017062d..565752af2204 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -22,7 +22,7 @@
 		mode-bootloader = <0x02>;
 	};
 };
-	
+
 &spmi_bus {
 	pmk8350: pmic@PMK8350_SID {
 		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
@@ -76,6 +76,14 @@
 			status = "disabled";
 		};
 
+		pmk8350_sdam_1: nvram@7000 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7000 0x100>;
+		};
+
 		pmk8350_sdam_2: nvram@7100 {
 			compatible = "qcom,spmi-sdam";
 			reg = <0x7100>;
@@ -89,6 +97,70 @@
 			};
 		};
 
+		pmk8350_sdam_5: nvram@7400 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7400 0x100>;
+		};
+
+		pmk8350_sdam_13: nvram@7c00 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7c00>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7c00 0x100>;
+		};
+
+		pmk8350_sdam_14: nvram@7d00 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7d00>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7d00 0x100>;
+		};
+
+		pmk8350_sdam_21: nvram@8400 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x8400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x8400 0x100>;
+		};
+
+		pmk8350_sdam_22: nvram@8500 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x8500>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x8500 0x100>;
+		};
+
+		pmk8350_sdam_23: nvram@8600 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x8600>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x8600 0x100>;
+		};
+
+		pmk8350_sdam_41: nvram@9800 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x9800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x9800 0x100>;
+		};
+
+		pmk8350_sdam_46: nvram@9d00 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x9d00>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x9d00 0x100>;
+		};
+
 		pmk8350_gpios: gpio@b000 {
 			compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
 			reg = <0xb000>;
diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
index c7ac9b2eaacf..583f61fc16ad 100644
--- a/arch/arm64/boot/dts/qcom/pmk8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
@@ -64,7 +64,7 @@
 			};
 		};
 
-		pmk8550_gpios: gpio@8800 {
+		pmk8550_gpios: gpio@b800 {
 			compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio";
 			reg = <0xb800>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
index dbd4b91dfe06..5084de66fc46 100644
--- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
@@ -12,7 +12,6 @@
 	thermal-zones {
 		pmm8155au-1-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmm8155au_1_temp>;
 
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
index 1cee20ac2c9c..555e4a456ef1 100644
--- a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
@@ -11,7 +11,6 @@
 	thermal-zones {
 		pmm8155au-2-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmm8155au_2_temp>;
 
diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
index febda50779f9..f8efd8e5e68f 100644
--- a/arch/arm64/boot/dts/qcom/pmr735a.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
@@ -36,7 +36,7 @@
 	thermal-zones {
 		pmr735a_thermal: pmr735a-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmr735a_temp_alarm>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/pmr735b.dtsi b/arch/arm64/boot/dts/qcom/pmr735b.dtsi
index f7473e247322..09affc05b397 100644
--- a/arch/arm64/boot/dts/qcom/pmr735b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735b.dtsi
@@ -10,7 +10,7 @@
 	thermal-zones {
 		pmr735b_thermal: pmr735b-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmr735b_temp_alarm>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
index 37daaefe3431..f9f1793d310e 100644
--- a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pmr735d-k-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmr735d_k_temp_alarm>;
 
diff --git a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
index 3b470f6ac46f..d91fbd3bff10 100644
--- a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pmr735d-l-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmr735d_l_temp_alarm>;
 
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 461ad97032f7..3f9100c7eff4 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -12,7 +12,6 @@
 	thermal-zones {
 		pms405-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&pms405_temp>;
 
diff --git a/arch/arm64/boot/dts/qcom/pmx75.dtsi b/arch/arm64/boot/dts/qcom/pmx75.dtsi
index 373e45f63dff..2e61b7849c92 100644
--- a/arch/arm64/boot/dts/qcom/pmx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmx75.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pmx75-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmx75_temp_alarm>;
 
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index d46e591e72b5..08141b41de24 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -5,12 +5,17 @@
  * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+#include <dt-bindings/clock/qcom,qcm2290-gpucc.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,qcm2290.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
 / {
@@ -38,7 +43,7 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
@@ -46,18 +51,18 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
@@ -65,13 +70,13 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
@@ -79,13 +84,13 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
@@ -93,34 +98,34 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 			};
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP: cluster-sleep-0 {
+			cluster_sleep: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000043>;
 				entry-latency-us = <800>;
@@ -132,7 +137,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			CPU_SLEEP: cpu-sleep-0 {
+			cpu_sleep: cpu-sleep-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "power-collapse";
 				arm,psci-suspend-param = <0x40000003>;
@@ -149,7 +154,10 @@
 			compatible = "qcom,scm-qcm2290", "qcom,scm";
 			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
 			clock-names = "core";
+			qcom,dload-mode = <&tcsr_regs 0x13000>;
 			#reset-cells = <1>;
+			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
 		};
 	};
 
@@ -160,7 +168,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -168,33 +176,34 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_SLEEP>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_SLEEP>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_SLEEP>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_SLEEP>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep>;
 		};
 
-		CLUSTER_PD: power-domain-cpu-cluster {
+		cluster_pd: power-domain-cpu-cluster {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP>;
+			power-domains = <&mpm>;
+			domain-idle-states = <&cluster_sleep>;
 		};
 	};
 
@@ -208,7 +217,7 @@
 			mboxes = <&apcs_glb 0>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-qcm2290";
+				compatible = "qcom,rpm-qcm2290", "qcom,glink-smd-rpm";
 				qcom,glink-channels = "rpm_requests";
 
 				rpmcc: clock-controller {
@@ -261,6 +270,24 @@
 				};
 			};
 		};
+
+		mpm: interrupt-controller {
+			compatible = "qcom,mpm";
+			qcom,rpm-msg-ram = <&apss_mpm>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apcs_glb 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#power-domain-cells = <0>;
+			interrupt-parent = <&intc>;
+			qcom,mpm-pin-count = <96>;
+			qcom,mpm-pin-map = <2 275>,  /* TSENS0 uplow */
+					   <5 296>,  /* Soundwire master_irq */
+					   <12 422>, /* DWC3 ss_phy_irq */
+					   <24 79>,  /* Soundwire wake_irq */
+					   <86 183>, /* MPM wake, SPMI */
+					   <90 260>; /* QUSB2_PHY DP+DM */
+		};
 	};
 
 	reserved_memory: reserved-memory {
@@ -418,12 +445,18 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs: syscon@3c0000 {
+			compatible = "qcom,qcm2290-tcsr", "syscon";
+			reg = <0x0 0x003c0000 0x0 0x40000>;
+		};
+
 		tlmm: pinctrl@500000 {
 			compatible = "qcom,qcm2290-tlmm";
 			reg = <0x0 0x00500000 0x0 0x300000>;
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			gpio-ranges = <&tlmm 0 0 127>;
+			wakeup-parent = <&mpm>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -519,6 +552,13 @@
 				bias-disable;
 			};
 
+			qup_uart3_default: qup-uart3-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			qup_uart4_default: qup-uart4-default-state {
 				pins = "gpio12", "gpio13";
 				function = "qup4";
@@ -526,6 +566,20 @@
 				bias-disable;
 			};
 
+			cci0_default: cci0-default-state {
+				pins = "gpio22", "gpio23";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			sdc1_state_on: sdc1-on-state {
 				clk-pins {
 					pins = "sdc1_clk";
@@ -664,8 +718,82 @@
 			clock-output-names = "usb3_phy_pipe_clk_src";
 
 			#phy-cells = <0>;
+			orientation-switch;
+
+			qcom,tcsr-reg = <&tcsr_regs 0xb244>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_dwc3_ss>;
+					};
+				};
+			};
+		};
+
+		system_noc: interconnect@1880000 {
+			compatible = "qcom,qcm2290-snoc";
+			reg = <0x0 0x01880000 0x0 0x60200>;
+			#interconnect-cells = <2>;
+
+			qup_virt: interconnect-qup {
+				compatible = "qcom,qcm2290-qup-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,qcm2290-mmnrt-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,qcm2290-mmrt-virt";
+				#interconnect-cells = <2>;
+			};
+		};
+
+		config_noc: interconnect@1900000 {
+			compatible = "qcom,qcm2290-cnoc";
+			reg = <0x0 0x01900000 0x0 0x8200>;
+			#interconnect-cells = <2>;
+		};
+
+		cryptobam: dma-controller@1b04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x01b04000 0x0 0x24000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x0084 0x11>,
+				 <&apps_smmu 0x0086 0x11>;
+		};
+
+		crypto: crypto@1b3a000 {
+			compatible = "qcom,qcm2290-qce", "qcom,ipq4019-qce", "qcom,qce";
+			reg = <0x0 0x01b3a000 0x0 0x6000>;
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+			dmas = <&cryptobam 6>, <&cryptobam 7>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x0084 0x11>,
+				 <&apps_smmu 0x0086 0x11>;
 		};
 
 		qfprom@1b44000 {
@@ -678,6 +806,65 @@
 				reg = <0x25b 0x1>;
 				bits = <1 4>;
 			};
+
+			gpu_speed_bin: gpu-speed-bin@2006 {
+				reg = <0x2006 0x2>;
+				bits = <5 8>;
+			};
+		};
+
+		pmu@1b8e300 {
+			compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x01b8e300 0x0 0x600>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <(1353 * 4 * 1000)>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+			};
 		};
 
 		spmi_bus: spmi@1c40000 {
@@ -692,7 +879,7 @@
 				    "obsrvr",
 				    "intr",
 				    "cnfg";
-			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "periph_irq";
 			qcom,ee = <0>;
 			qcom,channel = <0>;
@@ -707,8 +894,8 @@
 			reg = <0x0 0x04411000 0x0 0x1ff>,
 			      <0x0 0x04410000 0x0 0x8>;
 			#qcom,sensors = <10>;
-			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -720,9 +907,22 @@
 			clock-names = "core";
 		};
 
+		bimc: interconnect@4480000 {
+			compatible = "qcom,qcm2290-bimc";
+			reg = <0x0 0x04480000 0x0 0x80000>;
+			#interconnect-cells = <2>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
-			compatible = "qcom,rpm-msg-ram";
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
 		};
 
 		sram@4690000 {
@@ -755,13 +955,50 @@
 			resets = <&gcc GCC_SDCC1_BCR>;
 
 			power-domains = <&rpmpd QCM2290_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
 			iommus = <&apps_smmu 0xc0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x000f642c>;
 			qcom,ddr-config = <0x80040868>;
 			bus-width = <8>;
 
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <102400 65000>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+			};
 		};
 
 		sdhc_2: mmc@4784000 {
@@ -785,6 +1022,12 @@
 			power-domains = <&rpmpd QCM2290_VDDCX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0xa0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -798,11 +1041,15 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <261438 150000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -850,6 +1097,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -866,6 +1122,12 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -879,6 +1141,12 @@
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart0_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -893,6 +1161,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -909,6 +1186,12 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -925,6 +1208,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -941,6 +1233,12 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -957,6 +1255,15 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -973,11 +1280,34 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};
 
+			uart3: serial@4a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart3_default>;
+				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				status = "disabled";
+			};
+
 			i2c4: i2c@4a90000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a90000 0x0 0x4000>;
@@ -989,6 +1319,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1005,6 +1344,12 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1018,6 +1363,12 @@
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart4_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1032,6 +1383,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1048,6 +1408,12 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1057,9 +1423,10 @@
 		usb: usb@4ef8800 {
 			compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
 			reg = <0x0 0x04ef8800 0x0 0x400>;
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -1080,6 +1447,13 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			/* TODO: USB<->IPA path */
+			interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
 			wakeup-source;
 
 			#address-cells = <2>;
@@ -1100,9 +1474,537 @@
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
+				snps,parkmode-disable-ss-quirk;
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
+				usb-role-switch;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_qmpphy_usb_ss_in>;
+						};
+					};
+				};
+			};
+		};
+
+		gpu: gpu@5900000 {
+			compatible = "qcom,adreno-07000200", "qcom,adreno";
+			reg = <0x0 0x05900000 0x0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gpucc GPU_CC_GX_GFX3D_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gcc GCC_BIMC_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "gmu",
+				      "xo";
+
+			interconnects = <&bimc MASTER_GFX3D RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+			interconnect-names = "gfx-mem";
+
+			iommus = <&adreno_smmu 0 1>,
+				 <&adreno_smmu 2 0>;
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+			qcom,gmu = <&gmu_wrapper>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&pil_gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* TODO: Scale RPM_SMD_BIMC_GPU_CLK w/ turbo freqs */
+				opp-1123200000 {
+					opp-hz = /bits/ 64 <1123200000>;
+					required-opps = <&rpmpd_opp_turbo_plus>;
+					opp-peak-kBps = <6881000>;
+					opp-supported-hw = <0x3>;
+					turbo-mode;
+				};
+
+				opp-1017600000 {
+					opp-hz = /bits/ 64 <1017600000>;
+					required-opps = <&rpmpd_opp_turbo>;
+					opp-peak-kBps = <6881000>;
+					opp-supported-hw = <0x3>;
+					turbo-mode;
+				};
+
+				opp-921600000 {
+					opp-hz = /bits/ 64 <921600000>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+					opp-peak-kBps = <6881000>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-844800000 {
+					opp-hz = /bits/ 64 <844800000>;
+					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <6881000>;
+					opp-supported-hw = <0x7>;
+				};
+
+				opp-672000000 {
+					opp-hz = /bits/ 64 <672000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <3879000>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-537600000 {
+					opp-hz = /bits/ 64 <537600000>;
+					required-opps = <&rpmpd_opp_svs>;
+					opp-peak-kBps = <2929000>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-355200000 {
+					opp-hz = /bits/ 64 <355200000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <1720000>;
+					opp-supported-hw = <0xf>;
+				};
+			};
+		};
+
+		gmu_wrapper: gmu@596a000 {
+			compatible = "qcom,adreno-gmu-wrapper";
+			reg = <0x0 0x0596a000 0x0 0x30000>;
+			reg-names = "gmu";
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+		};
+
+		gpucc: clock-controller@5990000 {
+			compatible = "qcom,qcm2290-gpucc";
+			reg = <0x0 0x05990000 0x0 0x9000>;
+			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+			required-opps = <&rpmpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@59a0000 {
+			compatible = "qcom,qcm2290-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x059a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "mem",
+				      "hlos",
+				      "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+
+			#global-interrupts = <1>;
+			#iommu-cells = <2>;
+		};
+
+		cci: cci@5c1b000 {
+			compatible = "qcom,qcm2290-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x5c1b000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, <&gcc GCC_CAMSS_CCI_0_CLK>;
+			clock-names = "ahb", "cci";
+			assigned-clocks = <&gcc GCC_CAMSS_CCI_0_CLK>;
+			assigned-clock-rates = <37500000>;
+
+			power-domains = <&gcc GCC_CAMSS_TOP_GDSC>;
+
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-names = "default";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: camss@5c6e000 {
+			compatible = "qcom,qcm2290-camss";
+
+			reg = <0x0 0x5c6e000 0x0 0x1000>,
+			      <0x0 0x5c75000 0x0 0x1000>,
+			      <0x0 0x5c52000 0x0 0x1000>,
+			      <0x0 0x5c53000 0x0 0x1000>,
+			      <0x0 0x5c66000 0x0 0x400>,
+			      <0x0 0x5c68000 0x0 0x400>,
+			      <0x0 0x5c11000 0x0 0x1000>,
+			      <0x0 0x5c6f000 0x0 0x4000>,
+			      <0x0 0x5c76000 0x0 0x4000>;
+			reg-names = "csid0",
+				    "csid1",
+				    "csiphy0",
+				    "csiphy1",
+				    "csitpg0",
+				    "csitpg1",
+				    "top",
+				    "vfe0",
+				    "vfe1";
+
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&gcc GCC_CAMSS_AXI_CLK>,
+				 <&gcc GCC_CAMSS_NRT_AXI_CLK>,
+				 <&gcc GCC_CAMSS_RT_AXI_CLK>,
+				 <&gcc GCC_CAMSS_TFE_0_CSID_CLK>,
+				 <&gcc GCC_CAMSS_TFE_1_CSID_CLK>,
+				 <&gcc GCC_CAMSS_CPHY_0_CLK>,
+				 <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+				 <&gcc GCC_CAMSS_CPHY_1_CLK>,
+				 <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+				 <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+				 <&gcc GCC_CAMSS_TFE_0_CLK>,
+				 <&gcc GCC_CAMSS_TFE_0_CPHY_RX_CLK>,
+				 <&gcc GCC_CAMSS_TFE_1_CLK>,
+				 <&gcc GCC_CAMSS_TFE_1_CPHY_RX_CLK> ;
+			clock-names = "ahb",
+				      "axi",
+				      "camnoc_nrt_axi",
+				      "camnoc_rt_axi",
+				      "csi0",
+				      "csi1",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "top_ahb",
+				      "vfe0",
+				      "vfe0_cphy_rx",
+				      "vfe1",
+				      "vfe1_cphy_rx";
+
+			interrupts = <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csiphy0",
+					  "csiphy1",
+					  "csitpg0",
+					  "csitpg1",
+					  "vfe0",
+					  "vfe1";
+
+			interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &config_noc SLAVE_CAMERA_CFG RPM_ACTIVE_TAG>,
+					<&mmrt_virt MASTER_CAMNOC_HF RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&mmnrt_virt MASTER_CAMNOC_SF RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+			interconnect-names = "ahb",
+					     "hf_mnoc",
+					     "sf_mnoc";
+
+			iommus = <&apps_smmu 0x400 0x0>,
+				 <&apps_smmu 0x800 0x0>,
+				 <&apps_smmu 0x820 0x0>,
+				 <&apps_smmu 0x840 0x0>;
+
+			power-domains = <&gcc GCC_CAMSS_TOP_GDSC>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		mdss: display-subsystem@5e00000 {
+			compatible = "qcom,qcm2290-mdss";
+			reg = <0x0 0x05e00000 0x0 0x1000>;
+			reg-names = "mdss";
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x420 0x2>,
+				 <&apps_smmu 0x421 0x0>;
+			interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@5e01000 {
+				compatible = "qcom,qcm2290-dpu";
+				reg = <0x0 0x05e01000 0x0 0x8f000>,
+				      <0x0 0x05eb0000 0x0 0x3000>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "core",
+					      "lut",
+					      "vsync";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd QCM2290_VDDCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-384000000 {
+						opp-hz = /bits/ 64 <384000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
 			};
+
+			mdss_dsi0: dsi@5e94000 {
+				compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x05e94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd QCM2290_VDDCX>;
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@5e94400 {
+				compatible = "qcom,dsi-phy-14nm-2290";
+				reg = <0x0 0x05e94400 0x0 0x100>,
+				      <0x0 0x05e94500 0x0 0x300>,
+				      <0x0 0x05e94800 0x0 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				power-domains = <&rpmpd QCM2290_VDDMX>;
+				required-opps = <&rpmpd_opp_nom>;
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,qcm2290-dispcc";
+			reg = <0x0 0x05f00000 0x0 0x20000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk";
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		remoteproc_mpss: remoteproc@6080000 {
@@ -1251,6 +2153,61 @@
 				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		venus: video-codec@5a00000 {
+			compatible = "qcom,qcm2290-venus";
+			reg = <0 0x5a00000 0 0xf0000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&gcc GCC_VENUS_GDSC>,
+					<&gcc GCC_VCODEC0_GDSC>,
+					<&rpmpd QCM2290_VDDCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "cx";
+			operating-points-v2 = <&venus_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_VENUS_CTL_CLK>,
+				 <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&gcc GCC_VENUS_CTL_AXI_CLK>,
+				 <&gcc GCC_VIDEO_THROTTLE_CORE_CLK>,
+				 <&gcc GCC_VIDEO_VCODEC0_SYS_CLK>,
+				 <&gcc GCC_VCODEC0_AXI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "bus",
+				      "throttle",
+				      "vcodec0_core",
+				      "vcodec0_bus";
+
+			memory-region = <&pil_video_mem>;
+			iommus = <&apps_smmu 0x860 0x0>,
+				 <&apps_smmu 0x880 0x0>,
+				 <&apps_smmu 0x861 0x04>,
+				 <&apps_smmu 0x863 0x0>,
+				 <&apps_smmu 0x804 0xe0>;
+
+			interconnects = <&mmnrt_virt MASTER_VIDEO_P0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &config_noc SLAVE_VENUS_CFG RPM_ACTIVE_TAG>;
+			interconnect-names = "video-mem",
+					     "cpu-cfg";
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133333333 {
+					opp-hz = /bits/ 64 <133333333>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+			};
+		};
+
 		wifi: wifi@c800000 {
 			compatible = "qcom,wcn3990-wifi";
 			reg = <0x0 0x0c800000 0x0 0x800000>;
@@ -1361,7 +2318,7 @@
 			compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0x0 0x0f521000 0x0 0x1000>;
 			reg-names = "freq-domain0";
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&lmh_cluster 0>;
 			interrupt-names = "dcvsh-irq-0";
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
 			clock-names = "xo", "alternate";
@@ -1369,13 +2326,22 @@
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
 		};
+
+		lmh_cluster: lmh@f550800 {
+			compatible = "qcom,qcm2290-lmh", "qcom,sm8150-lmh";
+			reg = <0x0 0x0f550800 0x0 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&cpu0>;
+			qcom,lmh-temp-arm-millicelsius = <65000>;
+			qcom,lmh-temp-low-millicelsius = <94500>;
+			qcom,lmh-temp-high-millicelsius = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
 	};
 
 	thermal-zones {
 		mapss-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -1400,9 +2366,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
@@ -1427,9 +2390,6 @@
 		};
 
 		wlan-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
@@ -1454,9 +2414,6 @@
 		};
 
 		cpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
@@ -1481,9 +2438,6 @@
 		};
 
 		cpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
@@ -1508,9 +2462,6 @@
 		};
 
 		mdm0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
@@ -1535,9 +2486,6 @@
 		};
 
 		mdm1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
@@ -1562,9 +2510,6 @@
 		};
 
 		gpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
@@ -1589,9 +2534,6 @@
 		};
 
 		hm-center-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -1616,9 +2558,6 @@
 		};
 
 		camera-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index 2de0b8c26c35..519e458e1a89 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -9,9 +9,13 @@
 #define PM7250B_SID 8
 #define PM7250B_SID1 9
 
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include "sc7280.dtsi"
 #include "pm7250b.dtsi"
 #include "pm7325.dtsi"
@@ -69,43 +73,62 @@
 		};
 	};
 
-	reserved-memory {
-		cont_splash_mem: cont-splash@e1000000 {
-			reg = <0x0 0xe1000000 0x0 0x2300000>;
-			no-map;
-		};
+	pmic-glink {
+		compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
 
-		adsp_mem: adsp@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		cdsp_mem: cdsp@88f00000 {
-			reg = <0x0 0x88f00000 0x0 0x1e00000>;
-			no-map;
-		};
+		orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
 
-		mpss_mem: mpss@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
 
-		wpss_mem: wpss@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-		rmtfs_mem: memory@f8500000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0 0xf8500000 0x0 0x600000>;
-			no-map;
+				port@0 {
+					reg = <0>;
 
-			qcom,client-id = <1>;
-			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&redriver_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&ocp96011_sbu_mux>;
+					};
+				};
+			};
 		};
 	};
 
-	ois_avdd0_1p8: regulator-ois-avdd0-1p8 {
+	vreg_afvdd_2p8: regulator-afvdd-2p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "AFVDD_2P8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_ois_avdd0_1p8: regulator-ois-avdd0-1p8 {
 		compatible = "regulator-fixed";
 		regulator-name = "OIS_AVDD0_1P8";
 		regulator-min-microvolt = <1800000>;
@@ -115,7 +138,7 @@
 		vin-supply = <&vreg_bob>;
 	};
 
-	ois_dvdd_1p1: regulator-ois-dvdd-1p1 {
+	vreg_ois_dvdd_1p1: regulator-ois-dvdd-1p1 {
 		compatible = "regulator-fixed";
 		regulator-name = "OIS_DVDD_1P1";
 		regulator-min-microvolt = <1100000>;
@@ -125,14 +148,208 @@
 		vin-supply = <&vreg_s8b>;
 	};
 
-	afvdd_2p8: regulator-afvdd-2p8 {
+	vreg_oled_dvdd: regulator-oled-dvdd {
 		compatible = "regulator-fixed";
-		regulator-name = "AFVDD_2P8";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		regulator-name = "oled_dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s1b>;
+
+		regulator-boot-on;
+	};
+
+	vreg_oled_vci: regulator-oled-vci {
+		compatible = "regulator-fixed";
+		regulator-name = "oled_vci";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_l13c>;
+
+		regulator-boot-on;
+	};
+
+	vreg_usb_redrive_1v8: regulator-usb-redrive-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_REDRIVE_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 61 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+
 		vin-supply = <&vreg_bob>;
+
+		regulator-boot-on;
+
+		pinctrl-0 = <&usb_redrive_1v8_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reserved-memory {
+		cont_splash_mem: cont-splash@e1000000 {
+			reg = <0x0 0xe1000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		removed_mem: removed@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x5100000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f8500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf8500000 0x0 0x600000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
+		};
+	};
+
+	thermal-zones {
+		camera-thermal {
+			polling-delay-passive = <0>;
+
+			thermal-sensors = <&pmk8350_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		chg-skin-thermal {
+			polling-delay-passive = <0>;
+
+			thermal-sensors = <&pm7250b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+
+			thermal-sensors = <&pm7250b_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <0>;
+
+			thermal-sensors = <&pm7250b_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pm8008-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&pm8008>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-cam-thermal {
+			polling-delay-passive = <0>;
+
+			thermal-sensors = <&pmk8350_adc_tm 4>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		sdm-skin-thermal {
+			polling-delay-passive = <0>;
+
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
 	};
 };
 
@@ -142,112 +359,132 @@
 		qcom,pmic-id = "b";
 
 		vreg_s1b: smps1 {
+			regulator-name = "vreg_s1b";
 			regulator-min-microvolt = <1840000>;
 			regulator-max-microvolt = <2040000>;
 		};
 
 		vreg_s7b: smps7 {
+			regulator-name = "vreg_s7b";
 			regulator-min-microvolt = <535000>;
 			regulator-max-microvolt = <1120000>;
 		};
 
 		vreg_s8b: smps8 {
+			regulator-name = "vreg_s8b";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1500000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
 		};
 
 		vreg_l1b: ldo1 {
+			regulator-name = "vreg_l1b";
 			regulator-min-microvolt = <825000>;
 			regulator-max-microvolt = <925000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l2b: ldo2 {
+			regulator-name = "vreg_l2b";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
 			regulator-min-microvolt = <312000>;
 			regulator-max-microvolt = <910000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
 			regulator-min-microvolt = <1140000>;
 			regulator-max-microvolt = <1260000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7b: ldo7 {
-			regulator-min-microvolt = <2400000>;
-			regulator-max-microvolt = <3544000>;
+			regulator-name = "vreg_l7b";
+			/* Constrained for UFS VCC, at least until UFS driver scales voltage */
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l8b: ldo8 {
+			regulator-name = "vreg_l8b";
 			regulator-min-microvolt = <870000>;
 			regulator-max-microvolt = <970000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9b: ldo9 {
+			regulator-name = "vreg_l9b";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11b: ldo11 {
+			regulator-name = "vreg_l11b";
 			regulator-min-microvolt = <1504000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l12b: ldo12 {
+			regulator-name = "vreg_l12b";
 			regulator-min-microvolt = <751000>;
 			regulator-max-microvolt = <824000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13b: ldo13 {
+			regulator-name = "vreg_l13b";
 			regulator-min-microvolt = <530000>;
 			regulator-max-microvolt = <824000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l14b: ldo14 {
+			regulator-name = "vreg_l14b";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l15b: ldo15 {
+			regulator-name = "vreg_l15b";
 			regulator-min-microvolt = <765000>;
 			regulator-max-microvolt = <1020000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l16b: ldo16 {
+			regulator-name = "vreg_l16b";
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l17b: ldo17 {
+			regulator-name = "vreg_l17b";
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l18b: ldo18 {
+			regulator-name = "vreg_l18b";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l19b: ldo19 {
+			regulator-name = "vreg_l19b";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -259,60 +496,70 @@
 		qcom,pmic-id = "c";
 
 		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
 			regulator-min-microvolt = <2190000>;
 			regulator-max-microvolt = <2210000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_s9c: smps9 {
+			regulator-name = "vreg_s9c";
 			regulator-min-microvolt = <1010000>;
 			regulator-max-microvolt = <1170000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1950000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3400000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
 			regulator-min-microvolt = <1650000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -321,36 +568,42 @@
 		};
 
 		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c: ldo10 {
+			regulator-name = "vreg_l10c";
 			regulator-min-microvolt = <720000>;
 			regulator-max-microvolt = <1050000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11c: ldo11 {
+			regulator-name = "vreg_l11c";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l12c: ldo12 {
+			regulator-name = "vreg_l12c";
 			regulator-min-microvolt = <1650000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_bob: bob {
+			regulator-name = "vreg_bob";
 			regulator-min-microvolt = <3008000>;
 			regulator-max-microvolt = <3960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
@@ -358,9 +611,45 @@
 	};
 };
 
-&dispcc {
-	/* Disable for now so simple-framebuffer continues working */
-	status = "disabled";
+&cci0 {
+	status = "okay";
+};
+
+&cci0_i2c0 {
+	/* IMX800 @ 1a */
+
+	eeprom@50 {
+		compatible = "puya,p24c256c", "atmel,24c256";
+		reg = <0x50>;
+		vcc-supply = <&vreg_l6p>;
+		read-only;
+	};
+};
+
+&cci0_i2c1 {
+	/* IMX858 @ 29 */
+
+	eeprom@54 {
+		compatible = "giantec,gt24p128f", "atmel,24c128";
+		reg = <0x54>;
+		vcc-supply = <&vreg_l6p>;
+		read-only;
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	/* S5KJN1SQ03 @ 10 */
+
+	eeprom@51 {
+		compatible = "giantec,gt24p128f", "atmel,24c128";
+		reg = <0x51>;
+		vcc-supply = <&vreg_l6p>;
+		read-only;
+	};
 };
 
 &gcc {
@@ -389,12 +678,108 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcm6490/fairphone5/a660_zap.mbn";
+};
+
 &i2c1 {
 	status = "okay";
 
-	/* PM8008 PMIC @ 8 and 9 */
+	pm8008: pmic@8 {
+		compatible = "qcom,pm8008";
+		reg = <0x8>;
+
+		interrupts-extended = <&tlmm 25 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&pm8350c_gpios 3 GPIO_ACTIVE_LOW>;
+
+		vdd-l1-l2-supply = <&vreg_s8b>;
+		vdd-l3-l4-supply = <&vreg_bob>;
+		vdd-l5-supply = <&vreg_bob>;
+		vdd-l6-supply = <&vreg_s1b>;
+		vdd-l7-supply = <&vreg_bob>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pm8008_int_default>, <&pm8008_reset_n_default>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pm8008 0 0 2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		#thermal-sensor-cells = <0>;
+
+		regulators {
+			vreg_l1p: ldo1 {
+				regulator-name = "vreg_l1p";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vreg_l2p: ldo2 {
+				regulator-name = "vreg_l2p";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1152000>;
+			};
+
+			vreg_l3p: ldo3 {
+				regulator-name = "vreg_l3p";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vreg_l4p: ldo4 {
+				regulator-name = "vreg_l4p";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2900000>;
+			};
+
+			vreg_l5p: ldo5 {
+				regulator-name = "vreg_l5p";
+				regulator-min-microvolt = <2704000>;
+				regulator-max-microvolt = <2900000>;
+			};
+
+			vreg_l6p: ldo6 {
+				regulator-name = "vreg_l6p";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1904000>;
+			};
+
+			vreg_l7p: ldo7 {
+				regulator-name = "vreg_l7p";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+	};
+
 	/* Pixelworks @ 26 */
-	/* FSA4480 USB audio switch @ 42 */
+
+	typec-mux@42 {
+		compatible = "ocs,ocp96011", "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 7 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			ocp96011_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+				data-lanes = <1 0>;
+			};
+		};
+	};
+
 	/* AW86927FCR haptics @ 5a */
 };
 
@@ -408,7 +793,36 @@
 &i2c4 {
 	status = "okay";
 
-	/* PTN36502 USB redriver @ 1a */
+	typec-mux@1a {
+		compatible = "nxp,ptn36502";
+		reg = <0x1a>;
+
+		vdd18-supply = <&vreg_usb_redrive_1v8>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_ss_in: endpoint {
+					remote-endpoint = <&usb_dp_qmpphy_out>;
+				};
+			};
+		};
+	};
 };
 
 &i2c9 {
@@ -421,8 +835,118 @@
 &ipa {
 	qcom,gsi-loader = "self";
 	memory-region = <&ipa_fw_mem>;
-	firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mdt";
+	firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+};
+
+&mdss_dsi {
+	vdda-supply = <&vreg_l6b>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "fairphone,fp5-rm692e5-boe", "raydium,rm692e5";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		vci-supply = <&vreg_oled_vci>;
+		vddio-supply = <&vreg_l12c>;
+		dvdd-supply = <&vreg_oled_dvdd>;
+
+		pinctrl-0 = <&disp_reset_n_active>, <&mdp_vsync>;
+		pinctrl-1 = <&disp_reset_n_suspend>, <&mdp_vsync>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi_phy {
+	vdds-supply = <&vreg_l10c>;
+	status = "okay";
+};
+
+&pm7250b_adc {
+	pinctrl-0 = <&pm7250b_adc_default>;
+	pinctrl-names = "default";
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "charger_skin_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "conn_therm";
+	};
+
+	channel@53 {
+		reg = <ADC5_GPIO2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "mem_therm";
+	};
+};
+
+&pm7250b_adc_tm {
 	status = "okay";
+
+	charger-skin-therm@0 {
+		reg = <0>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	conn-therm@1 {
+		reg = <1>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	mem-therm@2 {
+		reg = <2>;
+		io-channels = <&pm7250b_adc ADC5_GPIO2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm7250b_gpios {
+	pm7250b_adc_default: adc-default-state {
+		pins = "gpio12";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
 };
 
 &pm7325_gpios {
@@ -448,10 +972,101 @@
 	};
 };
 
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	cam-flash-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	sdm-skin-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wide-rfc-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8350c_gpios {
+	pm8008_reset_n_default: pm8008-reset-n-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-down;
+	};
+};
+
 &pmk8350_rtc {
 	status = "okay";
 };
 
+&pmk8350_vadc {
+	status = "okay";
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_xo_therm";
+	};
+
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_quiet_therm";
+	};
+
+	channel@145 {
+		reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_cam_flash_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_sdm_skin_therm";
+	};
+
+	channel@147 {
+		reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_wide_rfc_therm";
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -489,6 +1104,26 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm6490/fairphone5/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcm6490/fairphone5/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm6490/fairphone5/modem.mbn";
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "qcom/qcm6490/fairphone5/wpss.mbn";
+	status = "okay";
+};
+
 &sdc2_clk {
 	drive-strength = <16>;
 	bias-disable;
@@ -514,10 +1149,65 @@
 	status = "okay";
 };
 
+&sound {
+	compatible = "fairphone,fp5-sndcard";
+	model = "Fairphone 5";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	displayport-rx-dai-link {
+		link-name = "DisplayPort Playback";
+
+		codec {
+			sound-dai = <&mdss_dp>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai DISPLAY_PORT_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	usb-dai-link {
+		link-name = "USB Playback";
+
+		codec {
+			sound-dai = <&q6usbdai USB_RX>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai USB_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+};
+
 &spi13 {
 	status = "okay";
 
-	/* Goodix touchscreen @ 0 */
+	touchscreen@0 {
+		compatible = "goodix,gt9897";
+		reg = <0>;
+		interrupts-extended = <&tlmm 81 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 105 GPIO_ACTIVE_LOW>;
+		avdd-supply = <&vreg_l3c>;
+		vddio-supply = <&vreg_l2c>;
+		spi-max-frequency = <1000000>;
+		touchscreen-size-x = <1224>;
+		touchscreen-size-y = <2700>;
+	};
 };
 
 &tlmm {
@@ -534,6 +1224,20 @@
 		bias-disable;
 	};
 
+	disp_reset_n_active: disp-reset-n-active-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp_reset_n_suspend: disp-reset-n-suspend-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	hall_sensor_default: hall-sensor-default-state {
 		pins = "gpio155";
 		function = "gpio";
@@ -541,6 +1245,20 @@
 		bias-pull-up;
 	};
 
+	mdp_vsync: mdp-vsync-state {
+		pins = "gpio80";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	pm8008_int_default: pm8008-int-default-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
 		pins = "gpio28";
 		function = "gpio";
@@ -592,10 +1310,17 @@
 		function = "gpio";
 		bias-pull-down;
 	};
+
+	usb_redrive_1v8_en_default: usb-redrive-1v8-en-default-state {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
 };
 
 &uart5 {
-	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
 
@@ -632,12 +1357,37 @@
 	};
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b>;
+	vcc-max-microamp = <800000>;
+	/*
+	 * Technically l9b enables an eLDO (supplied by s1b) which then powers
+	 * VCCQ2 of the UFS.
+	 */
+	vccq-supply = <&vreg_l9b>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c>;
+	vdda-pll-supply = <&vreg_l6b>;
+
+	status = "okay";
+};
+
 &usb_1 {
+	dr_mode = "otg";
+	usb-role-switch;
+
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "peripheral";
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
 &usb_1_hsphy {
@@ -665,3 +1415,17 @@
 
 	status = "okay";
 };
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&redriver_ss_in>;
+};
+
+&venus {
+	firmware-name = "qcom/qcm6490/fairphone5/venus.mbn";
+	status = "okay";
+};
+
+&wifi {
+	qcom,calibration-variant = "Fairphone_5";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
new file mode 100644
index 000000000000..73fce639370c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -0,0 +1,991 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "qcs6490-audioreach.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCM6490 IDP";
+	compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	pm8350c_pwm_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pm8350c_pwm 3 65535>;
+		enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pmic_lcd_bl_en>;
+		pinctrl-names = "default";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	lcd_disp_bias: regulator-lcd-disp-bias {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_disp_bias";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		gpio = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&lcd_disp_bias_en>;
+		pinctrl-names = "default";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_vol_up_default>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume_up";
+			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@84800000 {
+			reg = <0x0 0x84800000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@8a700000 {
+			reg = <0x0 0x8a700000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8ae00000 {
+			reg = <0x0 0x8ae00000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8b31a000 {
+			reg = <0x0 0x8b31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	wcd9370: audio-codec-0 {
+		compatible = "qcom,wcd9370-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+
+		vdd-buck-supply = <&vreg_l17b_1p7>;
+		vdd-rxtx-supply = <&vreg_l18b_1p8>;
+		vdd-px-supply = <&vreg_l18b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob_3p296>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+
+		qcom,rx-device = <&wcd937x_rx>;
+		qcom,tx-device = <&wcd937x_tx>;
+
+		#sound-dai-cells = <1>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l3-supply = <&vreg_s2b_0p876>;
+		vdd-l5-supply = <&vreg_s2b_0p876>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-name = "vreg_s1b_1p872";
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s2b_0p876: smps2 {
+			regulator-name = "vreg_s2b_0p876";
+			regulator-min-microvolt = <570070>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-name = "vreg_s7b_0p972";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-name = "vreg_s8b_1p272";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-name = "vreg_l1b_0p912";
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-name = "vreg_l2b_3p072";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-name = "vreg_l3b_0p504";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p752: ldo4 {
+			regulator-name = "vreg_l4b_0p752";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <820000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		reg_l5b_0p752: ldo5 {
+			regulator-name = "reg_l5b_0p752";
+			regulator-min-microvolt = <552000>;
+			regulator-max-microvolt = <832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-name = "vreg_l7b_2p952";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-name = "vreg_l8b_0p904";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-name = "vreg_l11b_1p504";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-name = "vreg_l12b_0p751";
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-name = "vreg_l13b_0p53";
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-name = "vreg_l14b_1p08";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-name = "vreg_l15b_0p765";
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-name = "vreg_l16b_1p1";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-name = "vreg_l17b_1p7";
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-name = "vreg_l18b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-name = "vreg_l19b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-name = "vreg_s1c_2p19";
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s2c_0p752: smps2 {
+			regulator-name = "vreg_s2c_0p752";
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s5c_0p752: smps5 {
+			regulator-name = "vreg_s5c_0p752";
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7c_0p752: smps7 {
+			regulator-name = "vreg_s7c_0p752";
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-name = "vreg_s9c_1p084";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-name = "vreg_l2c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-name = "vreg_l3c_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-name = "vreg_l4c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-name = "vreg_l5c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-name = "vreg_l8c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <35440000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-name = "vreg_l10c_0p88";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-name = "vreg_l11c_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-name = "vreg_l12c_1p65";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-name = "vreg_l13c_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-name = "vreg_bob_3p296";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_AGGRE_NOC_PCIE_1_AXI_CLK> ,<GCC_PCIE_1_AUX_CLK>,
+			   <GCC_PCIE_1_AUX_CLK_SRC>, <GCC_PCIE_1_CFG_AHB_CLK>,
+			   <GCC_PCIE_1_MSTR_AXI_CLK>, <GCC_PCIE_1_PHY_RCHNG_CLK_SRC>,
+			   <GCC_PCIE_1_PIPE_CLK>, <GCC_PCIE_1_PIPE_CLK_SRC>,
+			   <GCC_PCIE_1_SLV_AXI_CLK>, <GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,<GCC_USB30_SEC_MASTER_CLK>,
+			   <GCC_USB30_SEC_MASTER_CLK_SRC>, <GCC_USB30_SEC_MOCK_UTMI_CLK>,
+			   <GCC_USB30_SEC_MOCK_UTMI_CLK_SRC>,
+			   <GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC>, <GCC_USB30_SEC_SLEEP_CLK>,
+			   <GCC_USB3_SEC_PHY_AUX_CLK>, <GCC_USB3_SEC_PHY_AUX_CLK_SRC>,
+			   <GCC_USB3_SEC_PHY_COM_AUX_CLK>, <GCC_USB3_SEC_PHY_PIPE_CLK>,
+			   <GCC_USB3_SEC_PHY_PIPE_CLK_SRC>, <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>, <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>, <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>, <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>, <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcm6490/a660_zap.mbn";
+};
+
+&lpass_rx_macro {
+	status = "okay";
+};
+
+&lpass_tx_macro {
+	status = "okay";
+};
+
+&lpass_va_macro {
+	status = "okay";
+};
+
+&lpass_wsa_macro {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi {
+	vdda-supply = <&vreg_l6b_1p2>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "novatek,nt36672e";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+
+		vddi-supply = <&vreg_l8c_1p62>;
+		avdd-supply = <&lcd_disp_bias>;
+		avee-supply = <&lcd_disp_bias>;
+
+		backlight = <&pm8350c_pwm_backlight>;
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi_phy {
+	vdds-supply = <&vreg_l10c_0p88>;
+	status = "okay";
+};
+
+&pm7250b_gpios {
+	lcd_disp_bias_en: lcd-disp-bias-en-state {
+		pins = "gpio2";
+		function = "func1";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		input-disable;
+		output-enable;
+		power-source = <0>;
+	};
+};
+
+&pm8350c_gpios {
+	pmic_lcd_bl_en: pmic-lcd-bl-en-state {
+		pins = "gpio7";
+		function = "normal";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		output-low;
+		power-source = <0>;
+	};
+
+	pmic_lcd_bl_pwm: pmic-lcd-bl-pwm-state {
+		pins = "gpio8";
+		function = "func1";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		output-low;
+		power-source = <0>;
+	};
+};
+
+&pm7325_gpios {
+	key_vol_up_default: key-vol-up-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pm8350c_pwm {
+	pinctrl-0 = <&pmic_lcd_bl_pwm>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm6490/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcm6490/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm6490/modem.mbn";
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "qcom/qcm6490/wpss.mbn";
+	status = "okay";
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdhc_1 {
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	vmmc-supply = <&vreg_l7b_2p952>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
+
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_2p96>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	compatible = "qcom,qcm6490-idp-sndcard";
+	model = "QCM6490-IDP";
+
+	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+			"SpkrRight IN", "WSA_SPK2 OUT",
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC2", "MIC BIAS2",
+			"TX DMIC0", "MIC BIAS1",
+			"TX DMIC1", "MIC BIAS2",
+			"TX DMIC2", "MIC BIAS3",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"VA DMIC0", "VA MIC BIAS3",
+			"VA DMIC1", "VA MIC BIAS3",
+			"VA DMIC2", "VA MIC BIAS1",
+			"VA DMIC3", "VA MIC BIAS1";
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>,
+				    <&swr2 0>, <&lpass_wsa_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		codec {
+			sound-dai = <&wcd9370 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		codec {
+			sound-dai = <&wcd9370 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		codec {
+			sound-dai = <&lpass_va_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	wcd937x_rx: codec@0,4 {
+		compatible = "sdw20217010a00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9370 RX Port 1 (HPH_L/R)       <==>    SWR1 Port 1 (HPH_L/R)
+		 * WCD9370 RX Port 2 (CLSH)          <==>    SWR1 Port 2 (CLSH)
+		 * WCD9370 RX Port 3 (COMP_L/R)      <==>    SWR1 Port 3 (COMP_L/R)
+		 * WCD9370 RX Port 4 (LO)            <==>    SWR1 Port 4 (LO)
+		 * WCD9370 RX Port 5 (DSD_L/R)       <==>    SWR1 Port 5 (DSD)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+
+		/*
+		 * Static channels mapping between slave and master rx port channels.
+		 * In the order of slave port channels, which is
+		 * hph_l, hph_r, clsh, comp_l, comp_r, lo, dsd_r, dsd_l.
+		 */
+		qcom,rx-channel-mapping = /bits/ 8 <1 2 1 1 2 1 1 2>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd937x_tx: codec@0,3 {
+		compatible = "sdw20217010a00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9370 TX Port 1 (ADC1)               <=> SWR2 Port 2
+		 * WCD9370 TX Port 2 (ADC2, 3)            <=> SWR2 Port 2
+		 * WCD9370 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3
+		 * WCD9370 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4
+		 */
+		qcom,tx-port-mapping = <1 1 2 3>;
+
+		/*
+		 * Static channel mapping between slave and master tx port channels.
+		 * In the order of slave port channels which is adc1, adc2, adc3,
+		 * mic0, dmic1, mbhc, dmic2, dmic3, dmci4, dmic5, dmic6, dmic7.
+		 */
+		qcom,tx-channel-mapping = /bits/ 8 <1 2 1 1 2 3 3 4 1 2 3 4>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	left_spkr: speaker@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		powerdown-gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <1 2 3 7>;
+	};
+
+	right_spkr: speaker@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		powerdown-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <4 5 6 8>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 2>, /* ADSP */
+			       <48 4>; /* NFC */
+
+	sd_cd: sd-cd-state {
+		pins = "gpio91";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p952>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&wifi {
+	memory-region = <&wlan_fw_mem>;
+	qcom,calibration-variant = "Qualcomm_qcm6490idp";
+
+	status = "okay";
+};
+
+&lpass_audiocc {
+	compatible = "qcom,qcm6490-lpassaudiocc";
+	/delete-property/ power-domains;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts
new file mode 100644
index 000000000000..251e72f11428
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts
@@ -0,0 +1,864 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ * Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &wpss_mem;
+
+/ {
+	model = "Particle Tachyon";
+	compatible = "particle,tachyon", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart12;
+		serial2 = &uart7;
+		serial3 = &uart8;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&activity_led_state>;
+		pinctrl-names = "default";
+
+		led-activity {
+			function = LED_FUNCTION_ACTIVITY;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&tlmm 14 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu_in: endpoint {
+						remote-endpoint = <&usbdp_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_power_5v: regulator-power-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "power_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&tlmm 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b700000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b710000 0x0 0xa000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f8500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf8500000 0x0 0x600000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
+		};
+	};
+
+
+	usbdp-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 108 GPIO_ACTIVE_HIGH>;
+		select-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usbdp_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usbdp_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu_in>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-name = "vreg_s1b_1p872";
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-name = "vreg_s7b_0p972";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-name = "vreg_s8b_1p272";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-name = "vreg_l1b_0p912";
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-name = "vreg_l2b_3p072";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-name = "vreg_l3b_0p504";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-name = "vreg_l7b_2p952";
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-name = "vreg_l8b_0p904";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-name = "vreg_l11b_1p504";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-name = "vreg_l12b_0p751";
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-name = "vreg_l13b_0p53";
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-name = "vreg_l14b_1p08";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-name = "vreg_l15b_0p765";
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-name = "vreg_l16b_1p1";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-name = "vreg_l17b_1p7";
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-name = "vreg_l18b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-name = "vreg_l19b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-name = "vreg_s1c_2p19";
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-name = "vreg_s9c_1p084";
+			regulator-min-microvolt = <1084000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-name = "vreg_l2c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-name = "vreg_l3c_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-name = "vreg_l4c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-name = "vreg_l5c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-name = "vreg_l8c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-name = "vreg_l10c_0p88";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-name = "vreg_l11c_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-name = "vreg_l12c_1p65";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-name = "vreg_l13c_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-name = "vreg_bob_3p296";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+};
+
+&ipa {
+	firmware-name = "qcom/qcm6490/particle/tachyon/ipa_fws.mbn";
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+
+	status = "okay";
+};
+
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcm6490/particle/tachyon/a660_zap.mbn";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_reset_n>, <&pcie0_wake_n>, <&pcie0_clkreq_n>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>, <&pcie1_clkreq_n>;
+	pinctrl-names = "default";
+
+	vddpe-3v3-supply = <&vreg_power_5v>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	status = "okay";
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_xo_therm";
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm6490/particle/tachyon/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcm6490/particle/tachyon/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm6490/particle/tachyon/modem.mbn";
+	status = "okay";
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_2p96>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&tlmm {
+	activity_led_state: activity-led-state {
+		pins = "gpio14";
+		function = "gpio";
+		bias-disable;
+	};
+
+	bt_en_state: bt-default-state {
+		pins = "gpio84";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+
+	pcie0_reset_n: pcie0-reset-n-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-disable;
+	};
+
+	pcie0_wake_n: pcie0-wake-n-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	pcie1_reset_n: pcie1-reset-n-state {
+		pins = "gpio2";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-disable;
+	};
+
+	pcie1_wake_n: pcie1-wake-n-state {
+		pins = "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	usbdp_sbu_default: usbdp-sbu-state {
+		oe-n-pins {
+			pins = "gpio108";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio42";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	wlan_en_state: wlan-default-state {
+		pins = "gpio85";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart7 {
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-1 = <&qup_uart7_sleep_cts>,
+		    <&qup_uart7_sleep_rts>,
+		    <&qup_uart7_sleep_tx>,
+		    <&qup_uart7_sleep_rx>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart12 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p952>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	dr_mode = "otg";
+	usb-role-switch;
+
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	dr_mode = "host";
+
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
new file mode 100644
index 000000000000..eb8efba1b9dd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
@@ -0,0 +1,957 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com>
+ * Copyright (c) 2024, Casey Connolly <casey.connolly@linaro.org>
+ */
+
+/dts-v1/;
+
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi" /* PM7350C */
+#include "pmk8350.dtsi" /* PMK7325 */
+
+/delete-node/ &rmtfs_mem;
+
+/ {
+	model = "SHIFT SHIFTphone 8";
+	compatible = "shift,otter", "qcom,qcm6490";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart7;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		framebuffer0: framebuffer@a000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xe1000000 0x0 (2400 * 1080 * 4)>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_down_default>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume up";
+			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: cont-splash@e1000000 {
+			reg = <0x0 0xe1000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@f8500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf8500000 0x0 0x600000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
+		};
+	};
+
+	thermal-zones {
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		chg-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-cam-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 4>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		sdm-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vreg_s1b: smps1 {
+			regulator-name = "vreg_s1b";
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7b: smps7 {
+			regulator-name = "vreg_s7b";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b: smps8 {
+			regulator-name = "vreg_s8b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b: ldo1 {
+			regulator-name = "vreg_l1b";
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b: ldo2 {
+			regulator-name = "vreg_l2b";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b: ldo7 {
+			regulator-name = "vreg_l7b";
+			/* Constrained for UFS VCC, at least until UFS driver scales voltage */
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b: ldo8 {
+			regulator-name = "vreg_l8b";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b: ldo9 {
+			regulator-name = "vreg_l9b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b: ldo11 {
+			regulator-name = "vreg_l11b";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b: ldo12 {
+			regulator-name = "vreg_l12b";
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b: ldo13 {
+			regulator-name = "vreg_l13b";
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b: ldo14 {
+			regulator-name = "vreg_l14b";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b: ldo15 {
+			regulator-name = "vreg_l15b";
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b: ldo16 {
+			regulator-name = "vreg_l16b";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b: ldo17 {
+			regulator-name = "vreg_l17b";
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b: ldo18 {
+			regulator-name = "vreg_l18b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b: ldo19 {
+			regulator-name = "vreg_l19b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9c: smps9 {
+			regulator-name = "vreg_s9c";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c: ldo10 {
+			regulator-name = "vreg_l10c";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c: ldo11 {
+			regulator-name = "vreg_l11c";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c: ldo12 {
+			regulator-name = "vreg_l12c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_EDP_CLKREF_EN>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcm6490/SHIFT/otter/a660_zap.mbn";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* PM8008 PMIC @ 8 and 9 */
+	/* rtc6226 FM receiver @ 64 */
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		vcc-supply = <&vreg_bob>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* tas2563 audio codec @ 4d */
+};
+
+&i2c9 {
+	status = "okay";
+
+	/* TMS(?) NFC @ 28 */
+	/* Ti drv2624 haptics @ 5a */
+};
+
+&i2c13 {
+	status = "okay";
+
+	/* focaltech FT3658U @ 38 */
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/qcm6490/SHIFT/otter/ipa_fws.mbn";
+	status = "okay";
+};
+
+&pm7250b_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "charger_skin_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "conn_therm";
+	};
+};
+
+&pm7250b_adc_tm {
+	status = "okay";
+
+	charger-skin-therm@0 {
+		reg = <0>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	conn-therm@1 {
+		reg = <1>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm7325_gpios {
+	volume_down_default: volume-down-default-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	cam-flash-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	sdm-skin-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wide-rfc-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	status = "okay";
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_xo_therm";
+	};
+
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_quiet_therm";
+	};
+
+	channel@145 {
+		reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_cam_flash_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_sdm_skin_therm";
+	};
+
+	channel@147 {
+		reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_wide_rfc_therm";
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qup_spi13_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_uart5_rx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart5_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm6490/SHIFT/otter/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcm6490/SHIFT/otter/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm6490/SHIFT/otter/modem.mbn";
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "qcom/qcm6490/SHIFT/otter/wpss.mbn";
+	status = "okay";
+};
+
+&sdc2_clk {
+	drive-strength = <16>;
+	bias-disable;
+};
+
+&sdc2_cmd {
+	drive-strength = <10>;
+	bias-pull-up;
+};
+
+&sdc2_data {
+	drive-strength = <10>;
+	bias-pull-up;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l9c>;
+	vqmmc-supply = <&vreg_l6c>;
+
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
+
+	status = "okay";
+};
+
+&tlmm {
+	/*
+	 * 48-52: protected by XPU, not sure why.
+	 */
+	gpio-reserved-ranges = <48 4>;
+
+	bluetooth_enable_default: bluetooth-enable-default-state {
+		pins = "gpio85";
+		function = "gpio";
+		output-low;
+		bias-disable;
+	};
+
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	sw_ctrl_default: sw-ctrl-default-state {
+		pins = "gpio86";
+		function = "gpio";
+		bias-pull-down;
+	};
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&uart7 {
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+			<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+
+		pinctrl-0 = <&bluetooth_enable_default>, <&sw_ctrl_default>;
+		pinctrl-names = "default";
+
+		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_l19b>;
+		vddaon-supply = <&vreg_s7b>;
+		vddbtcxmx-supply = <&vreg_s7b>;
+		vddrfacmn-supply = <&vreg_s7b>;
+		vddrfa0p8-supply = <&vreg_s7b>;
+		vddrfa1p7-supply = <&vreg_s1b>;
+		vddrfa1p2-supply = <&vreg_s8b>;
+		vddrfa2p2-supply = <&vreg_s1c>;
+		vddasd-supply = <&vreg_l11c>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b>;
+	vcc-max-microamp = <800000>;
+	/*
+	 * Technically l9b enables an eLDO (supplied by s1b) which then powers
+	 * VCCQ2 of the UFS.
+	 */
+	vccq-supply = <&vreg_l9b>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c>;
+	vdda-pll-supply = <&vreg_l6b>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	dr_mode = "otg";
+	usb-role-switch;
+
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l2b>;
+
+	qcom,hs-crossover-voltage-microvolt = <28000>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
+	qcom,hs-rise-fall-time-bp = <5430>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,hs-amplitude-bp = <2430>;
+
+	qcom,pre-emphasis-amplitude-bp = <20000>;
+	qcom,pre-emphasis-duration-bp = <20000>;
+
+	qcom,squelch-detector-bp = <(-2090)>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b>;
+	vdda-pll-supply = <&vreg_l1b>;
+
+	status = "okay";
+};
+
+&wifi {
+	qcom,calibration-variant = "SHIFTphone_8";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 10655401528e..a22b4501ce1e 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -62,7 +62,7 @@
 		vddrf-supply = <&vreg_l1_1p3>;
 		vddch0-supply = <&vdd_ch0_3p3>;
 
-		local-bd-address = [ 02 00 00 00 5a ad ];
+		local-bd-address = [ 00 00 00 00 00 00 ];
 
 		max-speed = <3200000>;
 	};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 2721f32dfb71..4328c1dda898 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -28,7 +28,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};
 
@@ -36,13 +36,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@100 {
+		cpu0: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x100>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
-			next-level-cache = <&L2_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 			clocks = <&apcs_glb>;
 			operating-points-v2 = <&cpu_opp_table>;
@@ -50,13 +50,13 @@
 			power-domain-names = "cpr";
 		};
 
-		CPU1: cpu@101 {
+		cpu1: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x101>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
-			next-level-cache = <&L2_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 			clocks = <&apcs_glb>;
 			operating-points-v2 = <&cpu_opp_table>;
@@ -64,13 +64,13 @@
 			power-domain-names = "cpr";
 		};
 
-		CPU2: cpu@102 {
+		cpu2: cpu@102 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x102>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
-			next-level-cache = <&L2_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 			clocks = <&apcs_glb>;
 			operating-points-v2 = <&cpu_opp_table>;
@@ -78,13 +78,13 @@
 			power-domain-names = "cpr";
 		};
 
-		CPU3: cpu@103 {
+		cpu3: cpu@103 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x103>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
-			next-level-cache = <&L2_0>;
+			cpu-idle-states = <&cpu_sleep_0>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 			clocks = <&apcs_glb>;
 			operating-points-v2 = <&cpu_opp_table>;
@@ -92,7 +92,7 @@
 			power-domain-names = "cpr";
 		};
 
-		L2_0: l2-cache {
+		l2_0: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
@@ -101,7 +101,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			CPU_SLEEP_0: cpu-sleep-0 {
+			cpu_sleep_0: cpu-sleep-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "standalone-power-collapse";
 				arm,psci-suspend-param = <0x40000003>;
@@ -177,7 +177,7 @@
 			mboxes = <&apcs_glb 0>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-qcs404";
+				compatible = "qcom,rpm-qcs404", "qcom,glink-smd-rpm";
 				qcom,glink-channels = "rpm_requests";
 
 				rpmcc: clock-controller {
@@ -558,9 +558,6 @@
 			reg = <0x00400000 0x80000>;
 			compatible = "qcom,qcs404-bimc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				<&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -601,18 +598,12 @@
 			reg = <0x00500000 0x15080>;
 			compatible = "qcom,qcs404-pcnoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-				<&rpmcc RPM_SMD_PNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			reg = <0x00580000 0x23080>;
 			compatible = "qcom,qcs404-snoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				<&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		remoteproc_cdsp: remoteproc@b00000 {
@@ -684,6 +675,14 @@
 			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "qusb2_phy";
+
 			status = "disabled";
 
 			usb3_dwc3: usb@7580000 {
@@ -695,6 +694,8 @@
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				dr_mode = "otg";
 			};
 		};
@@ -713,6 +714,14 @@
 			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB_HS_SYSTEM_CLK>;
 			assigned-clock-rates = <19200000>, <133333333>;
+
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "qusb2_phy";
+
 			status = "disabled";
 
 			usb@78c0000 {
@@ -724,6 +733,8 @@
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				dr_mode = "peripheral";
 			};
 		};
@@ -1301,6 +1312,7 @@
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0b000000 0x1000>,
 			      <0x0b002000 0x1000>;
@@ -1317,7 +1329,7 @@
 		};
 
 		apcs_hfpll: clock-controller@b016000 {
-			compatible = "qcom,hfpll";
+			compatible = "qcom,qcs404-hfpll";
 			reg = <0x0b016000 0x30>;
 			#clock-cells = <0>;
 			clock-output-names = "apcs_hfpll";
@@ -1461,7 +1473,7 @@
 			};
 		};
 
-		pcie: pci@10000000 {
+		pcie: pcie@10000000 {
 			compatible = "qcom,pcie-qcs404";
 			reg = <0x10000000 0xf1d>,
 			      <0x10000f20 0xa8>,
@@ -1509,15 +1521,25 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 	};
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 2 0xff08>,
-			     <GIC_PPI 3 0xff08>,
-			     <GIC_PPI 4 0xff08>,
-			     <GIC_PPI 1 0xff08>;
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	smp2p-adsp {
@@ -1583,7 +1605,6 @@
 	thermal-zones {
 		aoss-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 0>;
 
@@ -1598,7 +1619,6 @@
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 1>;
 
@@ -1613,7 +1633,6 @@
 
 		lpass-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 2>;
 
@@ -1628,7 +1647,6 @@
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 3>;
 
@@ -1643,7 +1661,6 @@
 
 		cluster-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 4>;
 
@@ -1667,17 +1684,16 @@
 			cooling-maps {
 				map0 {
 					trip = <&cluster_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -1701,17 +1717,16 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu0_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 6>;
 
@@ -1735,17 +1750,16 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu1_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 7>;
 
@@ -1769,17 +1783,16 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu2_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 8>;
 
@@ -1803,17 +1816,16 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu3_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		gpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 9>;
 
diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
new file mode 100644
index 000000000000..705ea71b07a1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -0,0 +1,519 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm6150.dtsi"
+#include "pm8150.dtsi"
+/ {
+	model = "Qualcomm Technologies, Inc. QCS615 Ride";
+	compatible = "qcom,qcs615-ride", "qcom,qcs615", "qcom,sm6150";
+	chassis-type = "embedded";
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &uart0;
+		serial1 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <38400000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	vreg_conn_1p8: regulator-conn-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_conn_1p8";
+		startup-delay-us = <4000>;
+		enable-active-high;
+		gpio = <&pm8150_gpios 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	vreg_conn_pa: regulator-conn-pa {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_conn_pa";
+		startup-delay-us = <4000>;
+		enable-active-high;
+		gpio = <&pm8150_gpios 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB2_VBUS";
+		gpio = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb2_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+		pinctrl-names = "default";
+
+		bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		wlan-enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_conn_pa>;
+		vddaon-supply = <&vreg_s5a>;
+		vddpmu-supply = <&vreg_conn_1p8>;
+		vddpmumx-supply = <&vreg_conn_1p8>;
+		vddpmucx-supply = <&vreg_conn_pa>;
+		vddrfa0p95-supply = <&vreg_s5a>;
+		vddrfa1p3-supply = <&vreg_s6a>;
+		vddrfa1p9-supply = <&vreg_l15a>;
+		vddpcie1p3-supply = <&vreg_s6a>;
+		vddpcie1p9-supply = <&vreg_l15a>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s3a: smps3 {
+			regulator-name = "vreg_s3a";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <650000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1829000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a: smps5 {
+			regulator-name = "vreg_s5a";
+			regulator-min-microvolt = <1896000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a: smps6 {
+			regulator-name = "vreg_s6a";
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1404000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1a: ldo1 {
+			regulator-name = "vreg_l1a";
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <852000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a: ldo2 {
+			regulator-name = "vreg_l2a";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <875000>;
+			regulator-max-microvolt = <975000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a: ldo10 {
+			regulator-name = "vreg_l10a";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a: ldo11 {
+			regulator-name = "vreg_l11a";
+			regulator-min-microvolt = <1232000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a: ldo12 {
+			regulator-name = "vreg_l12a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a: ldo13 {
+			regulator-name = "vreg_l13a";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3230000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a: ldo15 {
+			regulator-name = "vreg_l15a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a: ldo16 {
+			regulator-name = "vreg_l16a";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a: ldo17 {
+			regulator-name = "vreg_l17a";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&pcie {
+	perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+
+	status = "okay";
+};
+
+&pcie_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		qcom,calibration-variant = "QC_QCS615_Ride";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pm8150_gpios {
+	usb2_en: usb2-en-state {
+		pins = "gpio10";
+		function = "normal";
+		output-enable;
+		power-source = <0>;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs615/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs615/cdsp.mbn";
+
+	status = "okay";
+};
+
+&tlmm {
+	bt_en_state: bt-en-state {
+		pins = "gpio85";
+		function = "gpio";
+		bias-pull-down;
+		output-low;
+	};
+
+	pcie_default_state: pcie-default-state {
+		clkreq-pins {
+			pins = "gpio90";
+			function = "pcie_clk_req";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio101";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-pins {
+			pins = "gpio100";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	wlan_en_state: wlan-en-state {
+		pins = "gpio98";
+		function = "gpio";
+		bias-pull-down;
+		output-low;
+	};
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+	pinctrl-names = "default", "sleep";
+
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	vmmc-supply = <&vreg_l17a>;
+	vqmmc-supply = <&vreg_s4a>;
+
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_state_on>;
+	pinctrl-1 = <&sdc2_state_off>;
+	pinctrl-names = "default", "sleep";
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l10a>;
+	vqmmc-supply = <&vreg_s4a>;
+
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+		firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+	};
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy_2 {
+	vdd-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 123 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l17a>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&vreg_s4a>;
+	vccq2-max-microamp = <600000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+
+	status = "okay";
+};
+
+&venus {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi b/arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi
new file mode 100644
index 000000000000..c1867711298b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ *
+ * Common definitions for SC7280-based boards with AudioReach.
+ */
+
+#include <dt-bindings/clock/qcom,lpass-sc7280.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+&lpass_rx_macro {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&lpass_va_macro>;
+	clock-names = "mclk",
+		      "npl",
+		      "macro",
+		      "dcodec",
+		      "fsgen";
+};
+
+&lpass_tlmm {
+	clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+	clock-names = "core",
+		      "audio";
+};
+
+&lpass_tx_macro {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&lpass_va_macro>;
+	clock-names = "mclk",
+		      "npl",
+		      "macro",
+		      "dcodec",
+		      "fsgen";
+};
+
+&lpass_va_macro {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	clocks = <&q6prmcc LPASS_CLK_ID_VA_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+	clock-names = "mclk",
+		      "macro",
+		      "dcodec";
+
+	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>,
+		    <&lpass_dmic23_clk>, <&lpass_dmic23_data>;
+	pinctrl-names = "default";
+
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&lpass_wsa_macro {
+	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&lpass_va_macro>;
+	clock-names = "mclk",
+		      "npl",
+		      "macro",
+		      "dcodec",
+		      "fsgen";
+};
+
+&remoteproc_adsp_glink {
+	/delete-node/ apr;
+
+	gpr {
+		compatible = "qcom,gpr";
+		qcom,glink-channels = "adsp_apps";
+		qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+		qcom,intents = <512 20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		q6apm: service@1 {
+			compatible = "qcom,q6apm";
+			reg = <GPR_APM_MODULE_IID>;
+			#sound-dai-cells = <0>;
+			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+			q6apmdai: dais {
+				compatible = "qcom,q6apm-dais";
+				iommus = <&apps_smmu 0x1801 0x0>;
+			};
+
+			q6apmbedai: bedais {
+				compatible = "qcom,q6apm-lpass-dais";
+				#sound-dai-cells = <1>;
+			};
+		};
+
+		q6prm: service@2 {
+			compatible = "qcom,q6prm";
+			reg = <GPR_PRM_MODULE_IID>;
+			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+			q6prmcc: clock-controller {
+				compatible = "qcom,q6prm-lpass-clocks";
+				#clock-cells = <2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso
new file mode 100644
index 000000000000..619a42b5ef48
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Qualcomm Innovation Center, Inc. All rights reserved.
+*/
+
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/clock/qcom,gcc-sc7280.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+&spi11 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	st33htpm0: tpm@0 {
+		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso
new file mode 100644
index 000000000000..b9e4a5214f70
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/*
+ * Camera Sensor overlay on top of rb3gen2 core kit.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,camcc-sc7280.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&camss {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* The port index denotes CSIPHY id i.e. csiphy3 */
+		port@3 {
+			reg = <3>;
+
+			csiphy3_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@1a {
+		compatible = "sony,imx577";
+
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&cam2_default>;
+		pinctrl-1 = <&cam2_suspend>;
+
+		clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply = <&vreg_l18b_1p8>;
+		avdd-supply = <&vph_pwr>;
+		dvdd-supply = <&vph_pwr>;
+
+		port {
+			imx577_ep: endpoint {
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy3_ep>;
+			};
+		};
+	};
+};
+
+&tlmm {
+	cam2_default: cam2-default-state {
+		pins = "gpio67";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	cam2_suspend: cam2-suspend-state {
+		pins = "gpio67";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
new file mode 100644
index 000000000000..18cea8812001
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -0,0 +1,1349 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "qcs6490-audioreach.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Qualcomm Technologies, Inc. Robotics RB3gen2";
+	compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dp-connector {
+		compatible = "dp-connector";
+		label = "DP";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp_connector_in: endpoint {
+				remote-endpoint = <&mdss_edp_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	lt9611_1v2: lt9611-vdd12-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_1V2";
+
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@84800000 {
+			reg = <0x0 0x84800000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@8a700000 {
+			reg = <0x0 0x8a700000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8ae00000 {
+			reg = <0x0 0x8ae00000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8b31a000 {
+			reg = <0x0 0x8b31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&kypd_vol_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			linux,can-disable;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&redriver_usb_con_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu_in: endpoint {
+						remote-endpoint = <&redriver_usb_con_sbu>;
+					};
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		sdm-skin-thermal {
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet-thermal {
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	wcn6750-pmu {
+		compatible = "qcom,wcn6750-pmu";
+		pinctrl-0 = <&bt_en>;
+		pinctrl-names = "default";
+		vddaon-supply = <&vreg_s7b_0p972>;
+		vddasd-supply = <&vreg_l11c_2p8>;
+		vddpmu-supply = <&vreg_s7b_0p972>;
+		vddrfa0p8-supply = <&vreg_s7b_0p972>;
+		vddrfa1p2-supply = <&vreg_s8b_1p272>;
+		vddrfa1p7-supply = <&vreg_s1b_1p872>;
+		vddrfa2p2-supply = <&vreg_s1c_2p19>;
+
+		bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l3-supply = <&vreg_s2b_0p876>;
+		vdd-l5-supply = <&vreg_s2b_0p876>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-name = "vreg_s1b_1p872";
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s2b_0p876: smps2 {
+			regulator-name = "vreg_s2b_0p876";
+			regulator-min-microvolt = <570070>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-name = "vreg_s7b_0p972";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-name = "vreg_s8b_1p272";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-name = "vreg_l1b_0p912";
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-name = "vreg_l2b_3p072";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-name = "vreg_l3b_0p504";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p752: ldo4 {
+			regulator-name = "vreg_l4b_0p752";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <820000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		reg_l5b_0p752: ldo5 {
+			regulator-name = "reg_l5b_0p752";
+			regulator-min-microvolt = <552000>;
+			regulator-max-microvolt = <832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-name = "vreg_l7b_2p952";
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-name = "vreg_l8b_0p904";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-name = "vreg_l11b_1p504";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-name = "vreg_l12b_0p751";
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-name = "vreg_l13b_0p53";
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-name = "vreg_l14b_1p08";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-name = "vreg_l15b_0p765";
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-name = "vreg_l16b_1p1";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-name = "vreg_l17b_1p7";
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-name = "vreg_l18b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-name = "vreg_l19b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-name = "vreg_s1c_2p19";
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s2c_0p752: smps2 {
+			regulator-name = "vreg_s2c_0p752";
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s5c_0p752: smps5 {
+			regulator-name = "vreg_s5c_0p752";
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7c_0p752: smps7 {
+			regulator-name = "vreg_s7c_0p752";
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-name = "vreg_s9c_1p084";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-name = "vreg_l2c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-name = "vreg_l3c_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-name = "vreg_l4c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-name = "vreg_l5c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-name = "vreg_l8c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <35440000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-name = "vreg_l10c_0p88";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-name = "vreg_l11c_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-name = "vreg_l12c_1p65";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-name = "vreg_l13c_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-name = "vreg_bob_3p296";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcs6490/a660_zap.mbn";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+
+		interrupts-extended = <&tlmm 24 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v2>;
+		vcc-supply = <&vreg_l11c_2p8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	typec-mux@1c {
+		compatible = "onnn,nb7vpq904m";
+		reg = <0x1c>;
+
+		vcc-supply = <&vreg_l18b_1p8>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_usb_con_ss: endpoint {
+					remote-endpoint = <&pmic_glink_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_phy_con_ss: endpoint {
+					remote-endpoint = <&usb_dp_qmpphy_out>;
+					data-lanes = <0 1 2 3>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				redriver_usb_con_sbu: endpoint {
+					remote-endpoint = <&pmic_glink_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&lpass_va_macro {
+	status = "okay";
+};
+
+&lpass_wsa_macro {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+};
+
+&mdss_dsi {
+	vdda-supply = <&vreg_l6b_1p2>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi_phy {
+	vdds-supply = <&vreg_l10c_0p88>;
+	status = "okay";
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&dp_connector_in>;
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>, <&pcie1_clkreq_n>;
+	pinctrl-names = "default";
+
+	iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+		    <0x100 &apps_smmu 0x1c81 0x1>,
+		    <0x208 &apps_smmu 0x1c84 0x1>,
+		    <0x210 &apps_smmu 0x1c85 0x1>,
+		    <0x218 &apps_smmu 0x1c86 0x1>,
+		    <0x300 &apps_smmu 0x1c87 0x1>,
+		    <0x400 &apps_smmu 0x1c88 0x1>,
+		    <0x500 &apps_smmu 0x1c89 0x1>,
+		    <0x501 &apps_smmu 0x1c90 0x1>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pm7325_gpios {
+	kypd_vol_up_n: kypd-vol-up-n-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm7325_temp_alarm {
+	io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>;
+	io-channel-names = "thermal";
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	sdm-skin-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8350c_pwm {
+	nvmem = <&pmk8350_sdam_21>,
+		<&pmk8350_sdam_22>;
+	nvmem-names = "lpg_chan_sdam",
+		      "lut_sdam";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	led@1 {
+		reg = <1>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <3>;
+		linux,default-trigger = "none";
+		default-state = "off";
+		panic-indicator;
+	};
+
+	led@2 {
+		reg = <2>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <2>;
+		linux,default-trigger = "none";
+		default-state = "off";
+	};
+
+	led@3 {
+		reg = <3>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <1>;
+		linux,default-trigger = "none";
+		default-state = "off";
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	channel@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk8350_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		label = "xo_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@103 {
+		reg = <PM7325_ADC7_DIE_TEMP>;
+		label = "pm7325_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_quiet_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_sdm_skin_therm";
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qup_uart7_cts {
+	/*
+	 * Configure a bias-bus-hold on CTS to lower power
+	 * usage when Bluetooth is turned off. Bus hold will
+	 * maintain a low power state regardless of whether
+	 * the Bluetooth module drives the pin in either
+	 * direction or leaves the pin fully unpowered.
+	 */
+	bias-bus-hold;
+};
+
+&qup_uart7_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+&qup_uart7_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs6490/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs6490/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcs6490/modem.mbn";
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "qcom/qcs6490/wpss.mbn";
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
+
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_2p96>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,qcs6490-rb3gen2-sndcard";
+	model = "QCS6490-RB3Gen2";
+
+	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+			"SpkrRight IN", "WSA_SPK2 OUT",
+			"VA DMIC0", "vdd-micb",
+			"VA DMIC1", "vdd-micb",
+			"VA DMIC2", "vdd-micb",
+			"VA DMIC3", "vdd-micb";
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>,
+				    <&swr2 0>, <&lpass_wsa_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		codec {
+			sound-dai = <&lpass_va_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	left_spkr: speaker@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		reset-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <1 2 3 7>;
+	};
+
+	right_spkr: speaker@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		reset-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <4 5 6 8>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 2>, /* ADSP */
+			       <48 4>; /* NFC */
+
+	bt_en: bt-en-state {
+		pins = "gpio85";
+		function = "gpio";
+		output-low;
+		bias-disable;
+	};
+
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart7 {
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+	pinctrl-1 = <&qup_uart7_sleep_cts>,
+		    <&qup_uart7_sleep_rts>,
+		    <&qup_uart7_sleep_tx>,
+		    <&qup_uart7_sleep_rx>;
+	pinctrl-names = "default",
+			"sleep";
+
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		max-speed = <3200000>;
+	};
+};
+
+&usb_1 {
+	dr_mode = "otg";
+	usb-role-switch;
+
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&redriver_phy_con_ss>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&usb_dp_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp_out>;
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p952>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&venus {
+	status = "okay";
+};
+
+&wifi {
+	memory-region = <&wlan_fw_mem>;
+	qcom,calibration-variant = "Qualcomm_rb3gen2";
+
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&edp_hot_plug_det {
+	function = "gpio";
+	bias-disable;
+};
+
+&pm7250b_gpios {
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio2";
+		function = "normal";
+
+		output-high;
+		input-disable;
+		power-source = <0>;
+	};
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&tlmm {
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio24";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie1_reset_n: pcie1-reset-n-state {
+		pins = "gpio2";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-disable;
+	};
+
+	pcie1_wake_n: pcie1-wake-n-state {
+		pins = "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sd_cd: sd-cd-state {
+		pins = "gpio91";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&lpass_audiocc {
+	compatible = "qcom,qcm6490-lpassaudiocc";
+	/delete-property/ power-domains;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi b/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi
new file mode 100644
index 000000000000..a94b0bfa98dc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmm8620au_0: pmic@0 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8620au_0_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pmm8620au_0_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8620au_0_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8650au_1: pmic@2 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8650au_1_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8650au_1_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
new file mode 100644
index 000000000000..cabb3f508704
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "qcs8300.dtsi"
+#include "qcs8300-pmics.dtsi"
+/ {
+	model = "Qualcomm Technologies, Inc. QCS8300 Ride";
+	compatible = "qcom,qcs8300-ride", "qcom,qcs8300";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart7;
+		mmc0 = &sdhc_1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB2_VBUS";
+		gpio = <&pmm8650au_1_gpios 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb2_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9a: smps9 {
+			regulator-name = "vreg_s9a";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s5c: smps5 {
+			regulator-name = "vreg_s5c";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-mode = "2500base-x";
+	phy-handle = <&phy0>;
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: phy@8 {
+			compatible = "ethernet-phy-id31c3.1c33";
+			reg = <0x8>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 4 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcs8300/a623_zap.mbn";
+};
+
+&pmm8650au_1_gpios {
+	usb2_en: usb2-en-state {
+		pins = "gpio7";
+		function = "normal";
+		output-enable;
+		power-source = <0>;
+	};
+};
+
+&iris {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs8300/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs8300/cdsp0.mbn";
+	status = "okay";
+};
+
+&remoteproc_gpdsp {
+	firmware-name = "qcom/qcs8300/gpdsp0.mbn";
+	status = "okay";
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+	pinctrl-names = "default", "sleep";
+
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	vmmc-supply = <&vreg_l8a>;
+	vqmmc-supply = <&vreg_s4a>;
+
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	status = "okay";
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio5";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio6";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l7c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l7c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l7a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_2 {
+	dr_mode = "host";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
new file mode 100644
index 000000000000..8d78ccac411e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -0,0 +1,6223 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,qcs8300-gcc.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+#include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
+#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
+#include <dt-bindings/clock/qcom,sa8775p-videocc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <472>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_1>;
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <472>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&l2_2>;
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <507>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			operating-points-v2 = <&cpu2_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+
+			l2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&l2_3>;
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <507>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			operating-points-v2 = <&cpu2_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+
+			l2_3: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&l2_4>;
+			power-domains = <&cpu_pd4>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+
+			l2_4: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_5>;
+			power-domains = <&cpu_pd5>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+
+			l2_5: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&l2_6>;
+			power-domains = <&cpu_pd6>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+
+			l2_6: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&l2_7>;
+			power-domains = <&cpu_pd7>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+
+			l2_7: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		l3_0: l3-cache-0 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+		};
+
+		l3_1: l3-cache-1 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			little_cpu_sleep_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <449>;
+				exit-latency-us = <801>;
+				min-residency-us = <1574>;
+				local-timer-stop;
+			};
+
+			little_cpu_sleep_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <602>;
+				exit-latency-us = <961>;
+				min-residency-us = <4288>;
+				local-timer-stop;
+			};
+
+			big_cpu_sleep_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			big_cpu_sleep_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <1061>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			silver_cluster_sleep: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2552>;
+				exit-latency-us = <2848>;
+				min-residency-us = <5908>;
+			};
+
+			gold_cluster_sleep: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			system_sleep: domain-sleep {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x42000144>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(681600 * 4) (921600 * 32)>;
+		};
+
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(1017600 * 4) (921600 * 32)>;
+		};
+
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <(1708800 * 4) (921600 * 32)>;
+		};
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+		};
+
+		opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>;
+		};
+
+		opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+		};
+
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+		};
+
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+		};
+
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+		};
+
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+	};
+
+	cpu2_opp_table: opp-table-cpu2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(681600 * 4) (921600 * 32)>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			opp-peak-kBps = <(1017600 * 4) (921600 * 32)>;
+		};
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(1708800 * 4) (921600 * 32)>;
+		};
+
+		opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+		};
+
+		opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>;
+		};
+
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+		};
+
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+		};
+
+		opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2284800000 {
+			opp-hz = /bits/ 64 <2284800000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+		opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <(681600 * 4) (921600 * 32)>;
+		};
+
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <(1708800 * 4) (921600 * 32)>;
+		};
+
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+		};
+
+		opp-1305600000 {
+			opp-hz = /bits/ 64 <1305600000>;
+			opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>;
+		};
+
+		opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>;
+		};
+
+		opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+		};
+
+		opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+	};
+
+	dummy_eud: dummy-sink {
+		compatible = "arm,coresight-dummy-sink";
+
+		in-ports {
+			port {
+				eud_in: endpoint {
+					remote-endpoint = <&swao_rep_out1>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-qcs8300", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,qcs8300-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,qcs8300-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cluster_pd0: power-domain-cluster0 {
+			#power-domain-cells = <0>;
+			power-domains = <&system_pd>;
+			domain-idle-states = <&gold_cluster_sleep>;
+		};
+
+		cluster_pd1: power-domain-cluster1 {
+			#power-domain-cells = <0>;
+			power-domains = <&system_pd>;
+			domain-idle-states = <&silver_cluster_sleep>;
+		};
+
+		system_pd: power-domain-system {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&system_sleep>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_image_mem: aop-image-region@90800000 {
+			reg = <0x0 0x90800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-region@90860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x90860000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_mem: smem@90900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x90900000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		lpass_machine_learning_mem: lpass-machine-learning-region@93b00000 {
+			reg = <0x0 0x93b00000 0x0 0xf00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap-region@94a00000 {
+			reg = <0x0 0x94a00000 0x0 0x800000>;
+			no-map;
+		};
+
+		camera_mem: camera-region@95200000 {
+			reg = <0x0 0x95200000 0x0 0x500000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@95c00000 {
+			no-map;
+			reg = <0x0 0x95c00000 0x0 0x1e00000>;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb-region@97a00000 {
+			reg = <0x0 0x97a00000 0x0 0x80000>;
+			no-map;
+		};
+
+		q6_gpdsp_dtb_mem: q6-gpdsp-dtb-region@97a80000 {
+			reg = <0x0 0x97a80000 0x0 0x80000>;
+			no-map;
+		};
+
+		gpdsp_mem: gpdsp-region@97b00000 {
+			reg = <0x0 0x97b00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@99900000 {
+			reg = <0x0 0x99900000 0x0 0x80000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@99980000 {
+			reg = <0x0 0x99980000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode-region@9b780000 {
+			reg = <0x0 0x9b780000 0x0 0x2000>;
+			no-map;
+		};
+
+		cvp_mem: cvp-region@9b782000 {
+			reg = <0x0 0x9b782000 0x0 0x700000>;
+			no-map;
+		};
+
+		video_mem: video-region@9be82000 {
+			reg = <0x0 0x9be82000 0x0 0x700000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+	};
+
+	smp2p-gpdsp {
+		compatible = "qcom,smp2p";
+		interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_GPDSP0
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <617>, <616>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <17>;
+
+		smp2p_gpdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		smp2p_gpdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0 0x10 0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,qcs8300-gcc";
+			reg = <0x0 0x00100000 0x0 0xc7018>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,qcs8300-ipcc", "qcom,ipcc";
+			reg = <0x0 0x408000 0x0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qfprom: efuse@784000 {
+			compatible = "qcom,qcs8300-qfprom", "qcom,qfprom";
+			reg = <0x0 0x00784000 0x0 0x2410>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@240c {
+				reg = <0x240c 0x1>;
+				bits = <0 8>;
+			};
+		};
+
+		gpi_dma0: dma-controller@900000 {
+			compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x900000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x416 0x0>;
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x9c0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x403 0x0>;
+			dma-coherent;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart0: serial@980000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>,
+					    <&qup_uart0_tx>, <&qup_uart0_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart1: serial@984000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>,
+					    <&qup_uart1_tx>, <&qup_uart1_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart2: serial@988000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>,
+					    <&qup_uart2_tx>, <&qup_uart2_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart3: serial@98c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>,
+					    <&qup_uart3_tx>, <&qup_uart3_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart4: serial@990000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>,
+					    <&qup_uart4_tx>, <&qup_uart4_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart5: serial@994000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>,
+					    <&qup_uart5_tx>, <&qup_uart5_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart6: serial@998000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>,
+					    <&qup_uart6_tx>, <&qup_uart6_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x0099c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0xa00000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x456 0x0>;
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xac0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x443 0x0>;
+			dma-coherent;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>,
+					    <&qup_uart8_tx>, <&qup_uart8_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>,
+					    <&qup_uart9_tx>, <&qup_uart9_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart10: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>,
+					    <&qup_uart10_tx>, <&qup_uart10_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart11: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart11_tx>, <&qup_uart11_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart12: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>,
+					    <&qup_uart12_tx>, <&qup_uart12_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart13: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>,
+					    <&qup_uart13_tx>, <&qup_uart13_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart14: serial@a98000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>,
+					    <&qup_uart14_tx>, <&qup_uart14_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart15: serial@a9c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>,
+					    <&qup_uart15_tx>, <&qup_uart15_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma3: dma-controller@b00000 {
+			compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0xb00000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			dma-channels = <4>;
+			dma-channel-mask = <0xf>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		qupv3_id_3: geniqup@bc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xbc0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x43 0x0>;
+			dma-coherent;
+			status = "disabled";
+
+			i2c16: i2c@b80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c16_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma3 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma3 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi16: spi@b80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma3 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma3 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart16: serial@b80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart16_cts>, <&qup_uart16_rts>,
+					    <&qup_uart16_tx>, <&qup_uart16_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+		};
+
+		rng: rng@10d2000 {
+			compatible = "qcom,qcs8300-trng", "qcom,trng";
+			reg = <0x0 0x010d2000 0x0 0x1000>;
+		};
+
+		config_noc: interconnect@14c0000 {
+			compatible = "qcom,qcs8300-config-noc";
+			reg = <0x0 0x014c0000 0x0 0x13080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,qcs8300-system-noc";
+			reg = <0x0 0x01680000 0x0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16c0000 {
+			compatible = "qcom,qcs8300-aggre1-noc";
+			reg = <0x0 0x016c0000 0x0 0x17080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,qcs8300-aggre2-noc";
+			reg = <0x0 0x01700000 0x0 0x1a080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_anoc: interconnect@1760000 {
+			compatible = "qcom,qcs8300-pcie-anoc";
+			reg = <0x0 0x01760000 0x0 0xc080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gpdsp_anoc: interconnect@1780000 {
+			compatible = "qcom,qcs8300-gpdsp-anoc";
+			reg = <0x0 0x01780000 0x0 0xd080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@17a0000 {
+			compatible = "qcom,qcs8300-mmss-noc";
+			reg = <0x0 0x017a0000 0x0 0x40000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x100 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+			qcom,ice = <&ice>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,qcs8300-qmp-ufs-phy", "qcom,sa8775p-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe10>;
+			/*
+			 * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It
+			 * enables the CXO clock to eDP *and* UFS PHY.
+			 */
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_EDP_REF_CLKREF_EN>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <20>;
+			qcom,num-ees = <4>;
+			iommus = <&apps_smmu 0x480 0x00>,
+				 <&apps_smmu 0x481 0x00>;
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,qcs8300-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x01d88000 0x0 0x18000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,qcs8300-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
+		remoteproc_adsp: remoteproc@3000000 {
+			compatible = "qcom,qcs8300-adsp-pas", "qcom,sa8775p-adsp-pas";
+			reg = <0x0 0x3000000 0x0 0x00100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					memory-region = <&adsp_rpc_remote_heap_mem>;
+					qcom,vmids = <QCOM_SCM_VMID_LPASS
+						      QCOM_SCM_VMID_ADSP_HEAP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2003 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2004 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2005 0x0>;
+						dma-coherent;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x2001 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,qcs8300-lpass-ag-noc";
+			reg = <0x0 0x03c40000 0x0 0x17200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		stm@4002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x0 0x04002000 0x0 0x1000>,
+			      <0x0 0x16280000 0x0 0x180000>;
+			reg-names = "stm-base",
+				    "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		tpda@4004000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04004000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+
+					qdss_tpda_in1: endpoint {
+						remote-endpoint = <&qdss_tpdm1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					qdss_tpda_out: endpoint {
+						remote-endpoint = <&funnel0_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@400f000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x0400f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					qdss_tpdm1_out: endpoint {
+						remote-endpoint = <&qdss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@4041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04041000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+
+					funnel0_in6: endpoint {
+						remote-endpoint = <&qdss_tpda_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&qdss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04042000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+
+					funnel1_in4: endpoint {
+						remote-endpoint = <&apss_funnel1_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					funnel1_in5: endpoint {
+						remote-endpoint = <&dlct0_funnel_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					funnel1_in6: endpoint {
+						remote-endpoint = <&dlmm_funnel_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel1_in7: endpoint {
+						remote-endpoint = <&dlst_ch_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&qdss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@4045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04045000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					qdss_funnel_in0: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					qdss_funnel_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					qdss_funnel_out: endpoint {
+						remote-endpoint = <&aoss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@4841000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04841000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					prng_tpdm_out: endpoint {
+						remote-endpoint = <&dlct0_tpda_in19>;
+					};
+				};
+			};
+		};
+
+		tpdm@4850000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04850000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					pimem_tpdm_out: endpoint {
+						remote-endpoint = <&dlct0_tpda_in25>;
+					};
+				};
+			};
+		};
+
+		tpdm@4860000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04860000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					dlst_ch_tpdm0_out: endpoint {
+						remote-endpoint = <&dlst_ch_tpda_in8>;
+					};
+				};
+			};
+		};
+
+		tpda@4864000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04864000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@8 {
+					reg = <8>;
+
+					dlst_ch_tpda_in8: endpoint {
+						remote-endpoint = <&dlst_ch_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlst_ch_tpda_out: endpoint {
+						remote-endpoint = <&dlst_ch_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4865000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04865000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					dlst_ch_funnel_in0: endpoint {
+						remote-endpoint = <&dlst_ch_tpda_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					dlst_ch_funnel_in4: endpoint {
+						remote-endpoint = <&dlst_funnel_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					dlst_ch_funnel_in6: endpoint {
+						remote-endpoint = <&gdsp_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlst_ch_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@4980000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04980000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					turing2_tpdm_out: endpoint {
+						remote-endpoint = <&turing2_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4983000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04983000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					turing2_funnel_in0: endpoint {
+						remote-endpoint = <&turing2_tpdm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					turing2_funnel_out0: endpoint {
+						remote-endpoint = <&gdsp_tpda_in5>;
+					};
+				};
+			};
+		};
+
+		tpdm@4ac0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04ac0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					dlmm_tpdm0_out: endpoint {
+						remote-endpoint = <&dlmm_tpda_in27>;
+					};
+				};
+			};
+		};
+
+		tpda@4ac4000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04ac4000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1b {
+					reg = <27>;
+
+					dlmm_tpda_in27: endpoint {
+						remote-endpoint = <&dlmm_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlmm_tpda_out: endpoint {
+						remote-endpoint = <&dlmm_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4ac5000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04ac5000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					dlmm_funnel_in0: endpoint {
+						remote-endpoint = <&dlmm_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlmm_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@4ad0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04ad0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					dlct0_tpdm0_out: endpoint {
+						remote-endpoint = <&dlct0_tpda_in26>;
+					};
+				};
+			};
+		};
+
+		tpda@4ad3000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04ad3000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@13 {
+					reg = <19>;
+
+					dlct0_tpda_in19: endpoint {
+						remote-endpoint = <&prng_tpdm_out>;
+					};
+				};
+
+				port@19 {
+					reg = <25>;
+
+					dlct0_tpda_in25: endpoint {
+						remote-endpoint = <&pimem_tpdm_out>;
+					};
+				};
+
+				port@1a {
+					reg = <26>;
+
+					dlct0_tpda_in26: endpoint {
+						remote-endpoint = <&dlct0_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlct0_tpda_out: endpoint {
+						remote-endpoint = <&dlct0_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4ad4000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04ad4000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					dlct0_funnel_in0: endpoint {
+						remote-endpoint = <&dlct0_tpda_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					dlct0_funnel_in4: endpoint {
+						remote-endpoint = <&ddr_funnel5_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlct0_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in5>;
+					};
+				};
+			};
+		};
+
+		funnel@4b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04b04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+
+					aoss_funnel_in6: endpoint {
+						remote-endpoint = <&aoss_tpda_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					aoss_funnel_in7: endpoint {
+						remote-endpoint = <&qdss_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					aoss_funnel_out: endpoint {
+						remote-endpoint = <&etf0_in>;
+					};
+				};
+			};
+		};
+
+		tmc_etf: tmc@4b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x04b05000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etf0_in: endpoint {
+						remote-endpoint = <&aoss_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf0_out: endpoint {
+						remote-endpoint = <&swao_rep_in>;
+					};
+				};
+			};
+		};
+
+		replicator@4b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x04b06000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					swao_rep_in: endpoint {
+						remote-endpoint = <&etf0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+
+					swao_rep_out1: endpoint {
+						remote-endpoint = <&eud_in>;
+					};
+				};
+			};
+		};
+
+		tpda@4b08000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04b08000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					aoss_tpda_in0: endpoint {
+						remote-endpoint = <&aoss_tpdm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					aoss_tpda_in1: endpoint {
+						remote-endpoint = <&aoss_tpdm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					aoss_tpda_in2: endpoint {
+						remote-endpoint = <&aoss_tpdm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					aoss_tpda_in3: endpoint {
+						remote-endpoint = <&aoss_tpdm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					aoss_tpda_in4: endpoint {
+						remote-endpoint = <&aoss_tpdm4_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					aoss_tpda_out: endpoint {
+						remote-endpoint = <&aoss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b09000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b09000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm0_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0a000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b0a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm1_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0b000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b0b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm2_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in2>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b0c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm3_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0d000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b0d000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm4_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		cti@4b13000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x04b13000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@4b80000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b80000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					turing0_tpdm0_out: endpoint {
+						remote-endpoint = <&turing0_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpda@4b86000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04b86000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					turing0_tpda_in0: endpoint {
+						remote-endpoint = <&turing0_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					turing0_tpda_out: endpoint {
+						remote-endpoint = <&turing0_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4b87000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04b87000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					turing0_funnel_in0: endpoint {
+						remote-endpoint = <&turing0_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					turing0_funnel_out: endpoint {
+						remote-endpoint = <&gdsp_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		cti@4b8b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x04b8b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@4c40000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04c40000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					gdsp_tpdm0_out: endpoint {
+						remote-endpoint = <&gdsp_tpda_in8>;
+					};
+				};
+			};
+		};
+
+		tpda@4c44000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04c44000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@5 {
+					reg = <5>;
+
+					gdsp_tpda_in5: endpoint {
+						remote-endpoint = <&turing2_funnel_out0>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+
+					gdsp_tpda_in8: endpoint {
+						remote-endpoint = <&gdsp_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					gdsp_tpda_out: endpoint {
+						remote-endpoint = <&gdsp_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4c45000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04c45000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					gdsp_funnel_in0: endpoint {
+						remote-endpoint = <&gdsp_tpda_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					gdsp_funnel_in4: endpoint {
+						remote-endpoint = <&turing0_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					gdsp_funnel_out: endpoint {
+						remote-endpoint = <&dlst_ch_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@4c50000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04c50000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					dlst_tpdm0_out: endpoint {
+						remote-endpoint = <&dlst_tpda_in8>;
+					};
+				};
+			};
+		};
+
+		tpda@4c54000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04c54000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@8 {
+					reg = <8>;
+
+					dlst_tpda_in8: endpoint {
+						remote-endpoint = <&dlst_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlst_tpda_out: endpoint {
+						remote-endpoint = <&dlst_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4c55000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04c55000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					dlst_funnel_in0: endpoint {
+						remote-endpoint = <&dlst_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlst_funnel_out: endpoint {
+						remote-endpoint = <&dlst_ch_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		tpdm@4e00000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04e00000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					ddr_tpdm3_out: endpoint {
+						remote-endpoint = <&ddr_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		tpda@4e03000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04e03000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ddr_tpda_in0: endpoint {
+						remote-endpoint = <&ddr_funnel0_out0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ddr_tpda_in1: endpoint {
+						remote-endpoint = <&ddr_funnel1_out0>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					ddr_tpda_in4: endpoint {
+						remote-endpoint = <&ddr_tpdm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ddr_tpda_out: endpoint {
+						remote-endpoint = <&ddr_funnel5_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4e04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04e04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					ddr_funnel5_in0: endpoint {
+						remote-endpoint = <&ddr_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ddr_funnel5_out: endpoint {
+						remote-endpoint = <&dlct0_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		tpdm@4e10000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04e10000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					ddr_tpdm0_out: endpoint {
+						remote-endpoint = <&ddr_funnel0_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4e12000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04e12000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					ddr_funnel0_in0: endpoint {
+						remote-endpoint = <&ddr_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ddr_funnel0_out0: endpoint {
+						remote-endpoint = <&ddr_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@4e20000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04e20000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					ddr_tpdm1_out: endpoint {
+						remote-endpoint = <&ddr_funnel1_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4e22000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04e22000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					ddr_funnel1_in0: endpoint {
+						remote-endpoint = <&ddr_tpdm1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ddr_funnel1_out0: endpoint {
+						remote-endpoint = <&ddr_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		etm@6040000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06040000 0x0 0x1000>;
+			cpu = <&cpu0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in0>;
+					};
+				};
+			};
+		};
+
+		etm@6140000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06140000 0x0 0x1000>;
+			cpu = <&cpu1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in1>;
+					};
+				};
+			};
+		};
+
+		etm@6240000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06240000 0x0 0x1000>;
+			cpu = <&cpu2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in2>;
+					};
+				};
+			};
+		};
+
+		etm@6340000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06340000 0x0 0x1000>;
+			cpu = <&cpu3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in3>;
+					};
+				};
+			};
+		};
+
+		etm@6440000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06440000 0x0 0x1000>;
+			cpu = <&cpu4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in4>;
+					};
+				};
+			};
+		};
+
+		etm@6540000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06540000 0x0 0x1000>;
+			cpu = <&cpu5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in5>;
+					};
+				};
+			};
+		};
+
+		etm@6640000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06640000 0x0 0x1000>;
+			cpu = <&cpu6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in6>;
+					};
+				};
+			};
+		};
+
+		etm@6740000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06740000 0x0 0x1000>;
+			cpu = <&cpu7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6800000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06800000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					apss_funnel0_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					apss_funnel0_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					apss_funnel0_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					apss_funnel0_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					apss_funnel0_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					apss_funnel0_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					apss_funnel0_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					apss_funnel0_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_funnel0_out: endpoint {
+						remote-endpoint = <&apss_funnel1_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@6810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06810000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					apss_funnel1_in0: endpoint {
+						remote-endpoint = <&apss_funnel0_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					apss_funnel1_in3: endpoint {
+						remote-endpoint = <&apss_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_funnel1_out: endpoint {
+						remote-endpoint = <&funnel1_in4>;
+					};
+				};
+			};
+		};
+
+		cti@682b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0682b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@6860000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06860000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm3_out: endpoint {
+						remote-endpoint = <&apss_tpda_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@6861000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06861000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm4_out: endpoint {
+						remote-endpoint = <&apss_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		tpda@6863000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x06863000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					apss_tpda_in0: endpoint {
+						remote-endpoint = <&apss_tpdm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					apss_tpda_in1: endpoint {
+						remote-endpoint = <&apss_tpdm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					apss_tpda_in2: endpoint {
+						remote-endpoint = <&apss_tpdm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					apss_tpda_in3: endpoint {
+						remote-endpoint = <&apss_tpdm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					apss_tpda_in4: endpoint {
+						remote-endpoint = <&apss_tpdm4_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_tpda_out: endpoint {
+						remote-endpoint = <&apss_funnel1_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@68a0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x068a0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm1_out: endpoint {
+						remote-endpoint = <&apss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		tpdm@68b0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x068b0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm0_out: endpoint {
+						remote-endpoint = <&apss_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@68c0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x068c0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm2_out: endpoint {
+						remote-endpoint = <&apss_tpda_in2>;
+					};
+				};
+			};
+		};
+
+		cti@68e0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x068e0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@68f0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x068f0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6900000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06900000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		sdhc_1: mmc@87c4000 {
+			compatible = "qcom,qcs8300-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x087c4000 0x0 0x1000>,
+			      <0x0 0x087c5000 0x0 0x1000>;
+			reg-names = "hc",
+				    "cqhci";
+
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			iommus = <&apps_smmu 0x0 0x0>;
+			interconnects = <&aggre1_noc MASTER_SDC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDC1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			qcom,dll-config = <0x000f64ee>;
+			qcom,ddr-config = <0x80040868>;
+			supports-cqe;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@8904000 {
+			compatible = "qcom,qcs8300-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0x0 0x08904000 0x0 0x400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy: phy@8906000 {
+			compatible = "qcom,qcs8300-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0x0 0x08906000 0x0 0x400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@8907000 {
+			compatible = "qcom,qcs8300-qmp-usb3-uni-phy";
+			reg = <0x0 0x08907000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_CLKREF_EN>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_prim_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		serdes0: phy@8909000 {
+			compatible = "qcom,qcs8300-dwmac-sgmii-phy", "qcom,sa8775p-dwmac-sgmii-phy";
+			reg = <0x0 0x08909000 0x0 0x00000e10>;
+			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+			clock-names = "sgmi_ref";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-623.0", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&adreno_smmu 0 0xc00>,
+				 <&adreno_smmu 1 0xc00>;
+			operating-points-v2 = <&gpu_opp_table>;
+			qcom,gmu = <&gmu>;
+			interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_microcode_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-877000000 {
+					opp-hz = /bits/ 64 <877000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <12484375>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-780000000 {
+					opp-hz = /bits/ 64 <780000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <10687500>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-599000000 {
+					opp-hz = /bits/ 64 <599000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <8171875>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-479000000 {
+					opp-hz = /bits/ 64 <479000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <5285156>;
+					opp-supported-hw = <0x3>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-623.0", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x34000>,
+			      <0x0 0x03de0000 0x0 0x10000>,
+			      <0x0 0x0b290000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+			iommus = <&adreno_smmu 5 0xc00>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,qcs8300-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,qcs8300-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x3da0000 0x0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+				      "gcc_gpu_snoc_dvm_gfx_clk",
+				      "gpu_cc_ahb_clk",
+				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
+				      "gpu_cc_cx_gmu_clk",
+				      "gpu_cc_hub_cx_int_clk",
+				      "gpu_cc_hub_aon_clk";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		pmu@9091000 {
+			compatible = "qcom,qcs8300-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0x0 0x9091000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <762000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <1720000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <2601000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <6515000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <7984000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <10437000>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <12195000>;
+				};
+			};
+		};
+
+		pmu@90b5400 {
+			compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x90b5400 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <14236000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <16265000>;
+				};
+			};
+		};
+
+		pmu@90b6400 {
+			compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x90b6400 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+		};
+
+		dc_noc: interconnect@90e0000 {
+			compatible = "qcom,qcs8300-dc-noc";
+			reg = <0x0 0x090e0000 0x0 0x5080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9100000 {
+			compatible = "qcom,qcs8300-gem-noc";
+			reg = <0x0 0x9100000 0x0 0xf7080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		llcc: system-cache-controller@9200000 {
+			compatible = "qcom,qcs8300-llcc";
+			reg = <0x0 0x09200000 0x0 0x80000>,
+			      <0x0 0x09300000 0x0 0x80000>,
+			      <0x0 0x09400000 0x0 0x80000>,
+			      <0x0 0x09500000 0x0 0x80000>,
+			      <0x0 0x09a00000 0x0 0x80000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usb_1: usb@a600000 {
+			compatible = "qcom,qcs8300-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a600000 0x0 0xfc100>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			iommus = <&apps_smmu 0x80 0x0>;
+			phys = <&usb_1_hsphy>, <&usb_qmpphy>;
+			phy-names = "usb2-phy", "usb3-phy";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+
+			wakeup-source;
+
+			status = "disabled";
+		};
+
+		usb_2: usb@a400000 {
+			compatible = "qcom,qcs8300-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a400000 0x0 0xfc100>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_SLEEP_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
+
+			interrupts-extended = <&intc GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
+
+			power-domains = <&gcc GCC_USB20_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB20_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			iommus = <&apps_smmu 0x20 0x0>;
+
+			phys = <&usb_2_hsphy>;
+			phy-names = "usb2-phy";
+			maximum-speed = "high-speed";
+
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+
+			qcom,select-utmi-as-pipe-clk;
+			wakeup-source;
+
+			status = "disabled";
+		};
+
+		iris: video-codec@aa00000 {
+			compatible = "qcom,qcs8300-iris";
+
+			reg = <0x0 0x0aa00000 0x0 0xf0000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+					<&videocc VIDEO_CC_MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MX>,
+					<&rpmhpd RPMHPD_MMCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "mxc",
+					     "mmcx";
+
+			operating-points-v2 = <&iris_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg",
+					     "video-mem";
+
+			memory-region = <&video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+			reset-names = "bus";
+
+			iommus = <&apps_smmu 0x0880 0x0400>,
+				 <&apps_smmu 0x0887 0x0400>;
+			dma-coherent;
+
+			status = "disabled";
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-366000000 {
+					opp-hz = /bits/ 64 <366000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>,
+							<&rpmhpd_opp_nom>;
+				};
+
+				opp-533000000 {
+					opp-hz = /bits/ 64 <533000000>;
+					required-opps = <&rpmhpd_opp_turbo>,
+							<&rpmhpd_opp_turbo>;
+				};
+
+				opp-560000000 {
+					opp-hz = /bits/ 64 <560000000>;
+					required-opps = <&rpmhpd_opp_turbo_l1>,
+							<&rpmhpd_opp_turbo_l1>;
+				};
+			};
+		};
+
+		videocc: clock-controller@abf0000 {
+			compatible = "qcom,qcs8300-videocc";
+			reg = <0x0 0x0abf0000 0x0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,qcs8300-camcc";
+			reg = <0x0 0x0ade0000 0x0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sa8775p-dispcc0";
+			reg = <0x0 0x0af00000 0x0 0x20000>;
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <0>, <0>, <0>, <0>,
+				 <0>, <0>, <0>, <0>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,qcs8300-pdc", "qcom,pdc";
+			reg = <0x0 0xb220000 0x0 0x30000>,
+			      <0x0 0x17c000f0 0x0 0x64>;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			qcom,pdc-ranges = <0 480 40>,
+					  <40 140 14>,
+					  <54 263 1>,
+					  <55 306 4>,
+					  <59 312 3>,
+					  <62 374 2>,
+					  <64 434 2>,
+					  <66 438 2>,
+					  <70 520 1>,
+					  <73 523 1>,
+					  <118 568 6>,
+					  <124 609 3>,
+					  <159 638 1>,
+					  <160 720 3>,
+					  <169 728 30>,
+					  <199 416 2>,
+					  <201 449 1>,
+					  <202 89 1>,
+					  <203 451 1>,
+					  <204 462 1>,
+					  <205 264 1>,
+					  <206 579 1>,
+					  <207 653 1>,
+					  <208 656 1>,
+					  <209 659 1>,
+					  <210 122 1>,
+					  <211 699 1>,
+					  <212 705 1>,
+					  <213 450 1>,
+					  <214 643 2>,
+					  <216 646 5>,
+					  <221 390 5>,
+					  <226 700 2>,
+					  <228 440 1>,
+					  <229 663 1>,
+					  <230 524 2>,
+					  <232 612 3>,
+					  <235 723 5>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,qcs8300-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+					       IPCC_MPROC_SIGNAL_GLINK_QMP
+					       IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,qcs8300-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 134>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			wakeup-parent = <&pdc>;
+
+			hs0_mi2s_active: hs0-mi2s-active-state {
+				pins = "gpio106", "gpio107", "gpio108", "gpio109";
+				function = "hs0_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			mi2s1_active: mi2s1-active-state {
+				data0-pins {
+					pins = "gpio100";
+					function = "mi2s1_data0";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				data1-pins {
+					pins = "gpio101";
+					function = "mi2s1_data1";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				sclk-pins {
+					pins = "gpio98";
+					function = "mi2s1_sck";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				ws-pins {
+					pins = "gpio99";
+					function = "mi2s1_ws";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				pins = "gpio17", "gpio18";
+				function = "qup0_se0";
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				pins = "gpio19", "gpio20";
+				function = "qup0_se1";
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				pins = "gpio33", "gpio34";
+				function = "qup0_se2";
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				pins = "gpio25", "gpio26";
+				function = "qup0_se3";
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				pins = "gpio29", "gpio30";
+				function = "qup0_se4";
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				pins = "gpio21", "gpio22";
+				function = "qup0_se5";
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				pins = "gpio80", "gpio81";
+				function = "qup0_se6";
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				pins = "gpio37", "gpio38";
+				function = "qup1_se0";
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				pins = "gpio39", "gpio40";
+				function = "qup1_se1";
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				pins = "gpio84", "gpio85";
+				function = "qup1_se2";
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				pins = "gpio41", "gpio42";
+				function = "qup1_se3";
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				pins = "gpio45", "gpio46";
+				function = "qup1_se4";
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				pins = "gpio49", "gpio50";
+				function = "qup1_se5";
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				pins = "gpio89", "gpio90";
+				function = "qup1_se6";
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				pins = "gpio91", "gpio92";
+				function = "qup1_se7";
+			};
+
+			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+				pins = "gpio10", "gpio11";
+				function = "qup2_se0";
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				pins = "gpio17", "gpio18", "gpio19";
+				function = "qup0_se0";
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio20";
+				function = "qup0_se0";
+			};
+
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
+				pins = "gpio20";
+				function = "gpio";
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				pins = "gpio19", "gpio20", "gpio17";
+				function = "qup0_se1";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio18";
+				function = "qup0_se1";
+			};
+
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
+				pins = "gpio18";
+				function = "gpio";
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				pins = "gpio33", "gpio34", "gpio35";
+				function = "qup0_se2";
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio36";
+				function = "qup0_se2";
+			};
+
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
+				pins = "gpio36";
+				function = "gpio";
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				pins = "gpio25", "gpio26", "gpio27";
+				function = "qup0_se3";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio28";
+				function = "qup0_se3";
+			};
+
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
+				pins = "gpio28";
+				function = "gpio";
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				pins = "gpio29", "gpio30", "gpio31";
+				function = "qup0_se4";
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio32";
+				function = "qup0_se4";
+			};
+
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
+				pins = "gpio32";
+				function = "gpio";
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				pins = "gpio21", "gpio22", "gpio23";
+				function = "qup0_se5";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio24";
+				function = "qup0_se5";
+			};
+
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
+				pins = "gpio24";
+				function = "gpio";
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				pins = "gpio80", "gpio81", "gpio82";
+				function = "qup0_se6";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio83";
+				function = "qup0_se6";
+			};
+
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+				pins = "gpio83";
+				function = "gpio";
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				pins = "gpio37", "gpio38", "gpio39";
+				function = "qup1_se0";
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio40";
+				function = "qup1_se0";
+			};
+
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
+				pins = "gpio40";
+				function = "gpio";
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				pins = "gpio39", "gpio40", "gpio37";
+				function = "qup1_se1";
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio38";
+				function = "qup1_se1";
+			};
+
+			qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
+				pins = "gpio38";
+				function = "gpio";
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				pins = "gpio84", "gpio85", "gpio86";
+				function = "qup1_se2";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio87";
+				function = "qup1_se2";
+			};
+
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
+				pins = "gpio87";
+				function = "gpio";
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				pins = "gpio45", "gpio46", "gpio47";
+				function = "qup1_se4";
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio48";
+				function = "qup1_se4";
+			};
+
+			qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
+				pins = "gpio48";
+				function = "gpio";
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				pins = "gpio49", "gpio50", "gpio51";
+				function = "qup1_se5";
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio52";
+				function = "qup1_se5";
+			};
+
+			qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
+				pins = "gpio52";
+				function = "gpio";
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				pins = "gpio89", "gpio90", "gpio91";
+				function = "qup1_se6";
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio92";
+				function = "qup1_se6";
+			};
+
+			qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
+				pins = "gpio92";
+				function = "gpio";
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				pins = "gpio91", "gpio92", "gpio89";
+				function = "qup1_se7";
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio90";
+				function = "qup1_se7";
+			};
+
+			qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
+				pins = "gpio90";
+				function = "gpio";
+			};
+
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
+				pins = "gpio10", "gpio11", "gpio12";
+				function = "qup2_se0";
+			};
+
+			qup_spi16_cs: qup-spi16-cs-state {
+				pins = "gpio13";
+				function = "qup2_se0";
+			};
+
+			qup_spi16_cs_gpio: qup-spi16-cs-gpio-state {
+				pins = "gpio13";
+				function = "gpio";
+			};
+
+			qup_uart0_cts: qup-uart0-cts-state {
+				pins = "gpio17";
+				function = "qup0_se0";
+			};
+
+			qup_uart0_rts: qup-uart0-rts-state {
+				pins = "gpio18";
+				function = "qup0_se0";
+			};
+
+			qup_uart0_tx: qup-uart0-tx-state {
+				pins = "gpio19";
+				function = "qup0_se0";
+			};
+
+			qup_uart0_rx: qup-uart0-rx-state {
+				pins = "gpio20";
+				function = "qup0_se0";
+			};
+
+			qup_uart1_cts: qup-uart1-cts-state {
+				pins = "gpio19";
+				function = "qup0_se1";
+			};
+
+			qup_uart1_rts: qup-uart1-rts-state {
+				pins = "gpio20";
+				function = "qup0_se1";
+			};
+
+			qup_uart1_tx: qup-uart1-tx-state {
+				pins = "gpio17";
+				function = "qup0_se1";
+			};
+
+			qup_uart1_rx: qup-uart1-rx-state {
+				pins = "gpio18";
+				function = "qup0_se1";
+			};
+
+			qup_uart2_cts: qup-uart2-cts-state {
+				pins = "gpio33";
+				function = "qup0_se2";
+			};
+
+			qup_uart2_rts: qup-uart2-rts-state {
+				pins = "gpio34";
+				function = "qup0_se2";
+			};
+
+			qup_uart2_tx: qup-uart2-tx-state {
+				pins = "gpio35";
+				function = "qup0_se2";
+			};
+
+			qup_uart2_rx: qup-uart2-rx-state {
+				pins = "gpio36";
+				function = "qup0_se2";
+			};
+
+			qup_uart3_cts: qup-uart3-cts-state {
+				pins = "gpio25";
+				function = "qup0_se3";
+			};
+
+			qup_uart3_rts: qup-uart3-rts-state {
+				pins = "gpio26";
+				function = "qup0_se3";
+			};
+
+			qup_uart3_tx: qup-uart3-tx-state {
+				pins = "gpio27";
+				function = "qup0_se3";
+			};
+
+			qup_uart3_rx: qup-uart3-rx-state {
+				pins = "gpio28";
+				function = "qup0_se3";
+			};
+
+			qup_uart4_cts: qup-uart4-cts-state {
+				pins = "gpio29";
+				function = "qup0_se4";
+			};
+
+			qup_uart4_rts: qup-uart4-rts-state {
+				pins = "gpio30";
+				function = "qup0_se4";
+			};
+
+			qup_uart4_tx: qup-uart4-tx-state {
+				pins = "gpio31";
+				function = "qup0_se4";
+			};
+
+			qup_uart4_rx: qup-uart4-rx-state {
+				pins = "gpio32";
+				function = "qup0_se4";
+			};
+
+			qup_uart5_cts: qup-uart5-cts-state {
+				pins = "gpio21";
+				function = "qup0_se5";
+			};
+
+			qup_uart5_rts: qup-uart5-rts-state {
+				pins = "gpio22";
+				function = "qup0_se5";
+			};
+
+			qup_uart5_tx: qup-uart5-tx-state {
+				pins = "gpio23";
+				function = "qup0_se5";
+			};
+
+			qup_uart5_rx: qup-uart5-rx-state {
+				pins = "gpio23";
+				function = "qup0_se5";
+			};
+
+			qup_uart6_cts: qup-uart6-cts-state {
+				pins = "gpio80";
+				function = "qup0_se6";
+			};
+
+			qup_uart6_rts: qup-uart6-rts-state {
+				pins = "gpio81";
+				function = "qup0_se6";
+			};
+
+			qup_uart6_tx: qup-uart6-tx-state {
+				pins = "gpio82";
+				function = "qup0_se6";
+			};
+
+			qup_uart6_rx: qup-uart6-rx-state {
+				pins = "gpio83";
+				function = "qup0_se6";
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio43";
+				function = "qup0_se7";
+			};
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio44";
+				function = "qup0_se7";
+			};
+
+			qup_uart8_cts: qup-uart8-cts-state {
+				pins = "gpio37";
+				function = "qup1_se0";
+			};
+
+			qup_uart8_rts: qup-uart8-rts-state {
+				pins = "gpio38";
+				function = "qup1_se0";
+			};
+
+			qup_uart8_tx: qup-uart8-tx-state {
+				pins = "gpio39";
+				function = "qup1_se0";
+			};
+
+			qup_uart8_rx: qup-uart8-rx-state {
+				pins = "gpio40";
+				function = "qup1_se0";
+			};
+
+			qup_uart9_cts: qup-uart9-cts-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+			};
+
+			qup_uart9_rts: qup-uart9-rts-state {
+				pins = "gpio40";
+				function = "qup1_se1";
+			};
+
+			qup_uart9_tx: qup-uart9-tx-state {
+				pins = "gpio37";
+				function = "qup1_se1";
+			};
+
+			qup_uart9_rx: qup-uart9-rx-state {
+				pins = "gpio38";
+				function = "qup1_se1";
+			};
+
+			qup_uart10_cts: qup-uart10-cts-state {
+				pins = "gpio84";
+				function = "qup1_se2";
+			};
+
+			qup_uart10_rts: qup-uart10-rts-state {
+				pins = "gpio84";
+				function = "qup1_se2";
+			};
+
+			qup_uart10_tx: qup-uart10-tx-state {
+				pins = "gpio85";
+				function = "qup1_se2";
+			};
+
+			qup_uart10_rx: qup-uart10-rx-state {
+				pins = "gpio87";
+				function = "qup1_se2";
+			};
+
+			qup_uart11_tx: qup-uart11-tx-state {
+				pins = "gpio41";
+				function = "qup1_se3";
+			};
+
+			qup_uart11_rx: qup-uart11-rx-state {
+				pins = "gpio42";
+				function = "qup1_se3";
+			};
+
+			qup_uart12_cts: qup-uart12-cts-state {
+				pins = "gpio45";
+				function = "qup1_se4";
+			};
+
+			qup_uart12_rts: qup-uart12-rts-state {
+				pins = "gpio46";
+				function = "qup1_se4";
+			};
+
+			qup_uart12_tx: qup-uart12-tx-state {
+				pins = "gpio47";
+				function = "qup1_se4";
+			};
+
+			qup_uart12_rx: qup-uart12-rx-state {
+				pins = "gpio48";
+				function = "qup1_se4";
+			};
+
+			qup_uart13_cts: qup-uart13-cts-state {
+				pins = "gpio49";
+				function = "qup1_se5";
+			};
+
+			qup_uart13_rts: qup-uart13-rts-state {
+				pins = "gpio50";
+				function = "qup1_se5";
+			};
+
+			qup_uart13_tx: qup-uart13-tx-state {
+				pins = "gpio51";
+				function = "qup1_se5";
+			};
+
+			qup_uart13_rx: qup-uart13-rx-state {
+				pins = "gpio52";
+				function = "qup1_se5";
+			};
+
+			qup_uart14_cts: qup-uart14-cts-state {
+				pins = "gpio89";
+				function = "qup1_se6";
+			};
+
+			qup_uart14_rts: qup-uart14-rts-state {
+				pins = "gpio90";
+				function = "qup1_se6";
+			};
+
+			qup_uart14_tx: qup-uart14-tx-state {
+				pins = "gpio91";
+				function = "qup1_se6";
+			};
+
+			qup_uart14_rx: qup-uart14-rx-state {
+				pins = "gpio92";
+				function = "qup1_se6";
+			};
+
+			qup_uart15_cts: qup-uart15-cts-state {
+				pins = "gpio91";
+				function = "qup1_se7";
+			};
+
+			qup_uart15_rts: qup-uart15-rts-state {
+				pins = "gpio92";
+				function = "qup1_se7";
+			};
+
+			qup_uart15_tx: qup-uart15-tx-state {
+				pins = "gpio89";
+				function = "qup1_se7";
+			};
+
+			qup_uart15_rx: qup-uart15-rx-state {
+				pins = "gpio90";
+				function = "qup1_se7";
+			};
+
+			qup_uart16_cts: qup-uart16-cts-state {
+				pins = "gpio10";
+				function = "qup2_se0";
+			};
+
+			qup_uart16_rts: qup-uart16-rts-state {
+				pins = "gpio11";
+				function = "qup2_se0";
+			};
+
+			qup_uart16_tx: qup-uart16-tx-state {
+				pins = "gpio12";
+				function = "qup2_se0";
+			};
+
+			qup_uart16_rx: qup-uart16-rx-state {
+				pins = "gpio13";
+				function = "qup2_se0";
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-bus-hold;
+				};
+			};
+		};
+
+		sram: sram@146d8000 {
+			compatible = "qcom,qcs8300-imem", "syscon", "simple-mfd";
+			reg = <0x0 0x146d8000 0x0 0x1000>;
+			ranges = <0x0 0x0 0x146d8000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,qcs8300-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI  98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI  99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie_smmu: iommu@15200000 {
+			compatible = "qcom,qcs8300-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15200000 0x0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+
+			interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 925 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 926 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 927 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 928 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 955 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 956 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 957 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 958 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 888 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 855 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a60000 0x0 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-qcs8300", "qcom,kpss-wdt";
+			reg = <0x0 0x17c10000 0x0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			ranges = <0x0 0x0 0x0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17c21000 {
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17c23000 {
+				reg = <0x17c23000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				reg = <0x17c25000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				reg = <0x17c27000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				reg = <0x17c29000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				reg = <0x17c2b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				reg = <0x17c2d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&system_pd>;
+			label = "apps_rsc";
+
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS 2>,
+					  <SLEEP_TCS 3>,
+					  <WAKE_TCS 3>,
+					  <CONTROL_TCS 0>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sa8775p-rpmh-clk";
+				#clock-cells = <1>;
+				clocks = <&xo_board_clk>;
+				clock-names = "xo";
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,qcs8300-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-0 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp-2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp-3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		epss_l3_cl0: interconnect@18590000 {
+			compatible = "qcom,qcs8300-epss-l3", "qcom,sa8775p-epss-l3",
+				     "qcom,epss-l3";
+			reg = <0x0 0x18590000 0x0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,qcs8300-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0x0 0x18591000 0x0 0x1000>,
+			      <0x0 0x18593000 0x0 0x1000>,
+			      <0x0 0x18594000 0x0 0x1000>;
+			reg-names = "freq-domain0",
+				    "freq-domain1",
+				    "freq-domain2";
+
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+
+		epss_l3_cl1: interconnect@18592000 {
+			compatible = "qcom,qcs8300-epss-l3", "qcom,sa8775p-epss-l3",
+				     "qcom,epss-l3";
+			reg = <0x0 0x18592000 0x0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
+		remoteproc_gpdsp: remoteproc@20c00000 {
+			compatible = "qcom,qcs8300-gpdsp-pas", "qcom,sa8775p-gpdsp0-pas";
+			reg = <0x0 0x20c00000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_gpdsp_in 0 0>,
+					      <&smp2p_gpdsp_in 1 0>,
+					      <&smp2p_gpdsp_in 2 0>,
+					      <&smp2p_gpdsp_in 3 0>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "cx",
+					     "mxc";
+
+			interconnects = <&gpdsp_anoc MASTER_DSP0 QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_CLK_CTL QCOM_ICC_TAG_ALWAYS>;
+
+			memory-region = <&gpdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_gpdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_GPDSP0
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "gpdsp";
+				qcom,remote-pid = <17>;
+			};
+		};
+
+		ethernet0: ethernet@23040000 {
+			compatible = "qcom,qcs8300-ethqos", "qcom,sa8775p-ethqos";
+			reg = <0x0 0x23040000 0x0 0x00010000>,
+			      <0x0 0x23056000 0x0 0x00000100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "sfty";
+
+			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
+				 <&gcc GCC_EMAC0_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC0_PTP_CLK>,
+				 <&gcc GCC_EMAC0_PHY_AUX_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "phyaux";
+			power-domains = <&gcc GCC_EMAC0_GDSC>;
+
+			phys = <&serdes0>;
+			phy-names = "serdes";
+
+			iommus = <&apps_smmu 0x120 0xf>;
+			dma-coherent;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <16384>;
+			tx-fifo-depth = <20480>;
+
+			status = "disabled";
+		};
+
+		nspa_noc: interconnect@260c0000 {
+			compatible = "qcom,qcs8300-nspa-noc";
+			reg = <0x0 0x260c0000 0x0 0x16080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		remoteproc_cdsp: remoteproc@26300000 {
+			compatible = "qcom,qcs8300-cdsp-pas", "qcom,sa8775p-cdsp0-pas";
+			reg = <0x0 0x26300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP0>;
+
+			power-domain-names = "cx",
+					     "mxc",
+					     "nsp";
+
+			interconnects = <&nspa_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x19c1 0x0440>,
+							 <&apps_smmu 0x1961 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x19c2 0x0440>,
+							 <&apps_smmu 0x1962 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x19c3 0x0440>,
+							 <&apps_smmu 0x1963 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x19c4 0x0440>,
+							 <&apps_smmu 0x1964 0x0400>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
new file mode 100644
index 000000000000..2e2e46f214c7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "qcs8550-aim300.dtsi"
+#include "pm8010.dtsi"
+#include "pmr735d_a.dtsi"
+#include "pmr735d_b.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT";
+	compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300", "qcom,qcs8550",
+		     "qcom,sm8550";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			debounce-interval = <15>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&redriver_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+	};
+
+	regulators-3 {
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+	};
+
+	regulators-4 {
+		vdd-s4-supply = <&vph_pwr>;
+	};
+
+	regulators-5 {
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+	};
+};
+
+&i2c_hub_2 {
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		vcc-supply = <&vreg_bob1>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+
+	typec-retimer@1c {
+		compatible = "onnn,nb7vpq904m";
+		reg = <0x1c>;
+
+		vcc-supply = <&vreg_l15b_1p8>;
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_ss_in: endpoint {
+					data-lanes = <3 2 1 0>;
+					remote-endpoint = <&usb_dp_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		pinctrl-0 = <&dsi_active>, <&te_default>;
+		pinctrl-1 = <&dsi_suspend>, <&te_default>;
+		pinctrl-names = "default", "sleep";
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+		vddio-supply = <&vreg_l12b_1p8>;
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs8550/adsp.mbn",
+			"qcom/qcs8550/adsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs8550/cdsp.mbn",
+			"qcom/qcs8550/cdsp_dtb.mbn";
+	status = "okay";
+};
+
+&swr1 {
+	status = "okay";
+};
+
+&swr2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 8>;
+
+	dsi_active: dsi-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	dsi_suspend: dsi-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	te_default: te-default-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&redriver_ss_in>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
new file mode 100644
index 000000000000..e6ac529e6b72
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcs8550.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s4g_1p25>;
+		vdd-l12-supply = <&vreg_s6g_1p86>;
+		vdd-l15-supply = <&vreg_s6g_1p86>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l3c_0p9: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+
+		vreg_s4e_0p95: smps4 {
+			regulator-name = "vreg_s4e_0p95";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_1p08: smps5 {
+			regulator-name = "vreg_s5e_1p08";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p88: ldo1 {
+			regulator-name = "vreg_l1e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e_0p9: ldo2 {
+			regulator-name = "vreg_l2e_0p9";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_s4f_0p5: smps4 {
+			regulator-name = "vreg_s4f_0p5";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p9: ldo1 {
+			regulator-name = "vreg_l1f_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_0p88: ldo3 {
+			regulator-name = "vreg_l3f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+
+		vreg_s1g_1p25: smps1 {
+			regulator-name = "vreg_s1g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2g_0p85: smps2 {
+			regulator-name = "vreg_s2g_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_0p8: smps3 {
+			regulator-name = "vreg_s3g_0p8";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_1p25: smps4 {
+			regulator-name = "vreg_s4g_1p25";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1408000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5g_0p85: smps5 {
+			regulator-name = "vreg_s5g_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6g_1p86: smps6 {
+			regulator-name = "vreg_s6g_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_1p2: ldo1 {
+			regulator-name = "vreg_l1g_1p2";
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1272000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2g_1p2: ldo2 {
+			regulator-name = "vreg_l2g_1p2";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3e_1p2>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1e_0p88>;
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3c_0p9>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	vdda-qref-supply = <&vreg_l1e_0p88>;
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vdd-hba-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	phys = <&pm8550b_eusb2_repeater>;
+
+	vdd-supply = <&vreg_l1e_0p88>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3f_0p88>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs8550.dtsi b/arch/arm64/boot/dts/qcom/qcs8550.dtsi
new file mode 100644
index 000000000000..f0acdd0b1e93
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "sm8550.dtsi"
+
+/delete-node/ &reserved_memory;
+
+/ {
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+
+		/* These are 3 types of reserved memory regions here:
+		 * 1. Firmware related regions which aren't shared with kernel.
+		 *     The device tree source in kernel doesn't need to have node to
+		 * indicate the firmware related reserved information. Bootloader
+		 * conveys the information by updating devicetree at runtime.
+		 *     This will be described as: UEFI saves the physical address of
+		 * the UEFI System Table to dts file's chosen node. Kernel read this
+		 * table and add reserved memory regions to efi config table. Current
+		 * reserved memory region may have reserved region which was not yet
+		 * used, release note of the firmware have such kind of information.
+		 * 2. Firmware related memory regions which are shared with Kernel
+		 *     The device tree source in the kernel needs to include nodes
+		 * that indicate fimware-related shared information. A label name
+		 * is suggested because this type of shared information needs to
+		 * be referenced by specific drivers for handling purposes.
+		 *     Unlike previous platforms, QCS8550 boots using EFI and describes
+		 * most reserved regions in the ESRT memory map. As a result, reserved
+		 * memory regions which aren't relevant to the kernel(like the hypervisor
+		 ( region) don't need to be described in DT.
+		 * 3. Remoteproc regions.
+		 *     Remoteproc regions will be reserved and then assigned to
+		 * subsystem firmware later.
+		 * Here is a reserved memory map for this platform:
+		 *  0x80000000 +-------------------+
+		 *             |                   |
+		 *             | Firmware Related  |
+		 *             |                   |
+		 *  0x8a800000 +-------------------+
+		 *             |                   |
+		 *             | Remoteproc Region |
+		 *             |                   |
+		 *  0xa7000000 +-------------------+
+		 *             |                   |
+		 *             | Kernel Available  |
+		 *             |                   |
+		 *  0xd4d00000 +-------------------+
+		 *             |                   |
+		 *             | Firmware Related  |
+		 *             |                   |
+		 * 0x100000000 +-------------------+
+		 */
+
+		aop_image_mem: aop-image-region@81c00000 {
+			reg = <0x0 0x81c00000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x81c60000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config-region@81c80000 {
+			no-map;
+			reg = <0x0 0x81c80000 0x0 0x20000>;
+		};
+
+		smem_mem: smem-region@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x81d00000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi-region@81f00000 {
+			reg = <0x0 0x81f00000 0x0 0x20000>;
+			no-map;
+		};
+
+		mpss_mem: mpss-region@8a800000 {
+			reg = <0x0 0x8a800000 0x0 0x10800000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 {
+			reg = <0x0 0x9b000000 0x0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw-region@9b080000 {
+			reg = <0x0 0x9b080000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi-region@9b090000 {
+			reg = <0x0 0x9b090000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code-region@9b09a000 {
+			reg = <0x0 0x9b09a000 0x0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss-region@9b100000 {
+			reg = <0x0 0x9b100000 0x0 0x180000>;
+			no-map;
+		};
+
+		spu_secure_shared_memory_mem: spu-secure-shared-memory-region@9b280000 {
+			reg = <0x0 0x9b280000 0x0 0x80000>;
+			no-map;
+		};
+
+		camera_mem: camera-region@9b300000 {
+			reg = <0x0 0x9b300000 0x0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video-region@9bb00000 {
+			reg = <0x0 0x9bb00000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp-region@9c200000 {
+			reg = <0x0 0x9c200000 0x0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@9c900000 {
+			reg = <0x0 0x9c900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 {
+			reg = <0x0 0x9e900000 0x0 0x80000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 {
+			reg = <0x0 0x9e980000 0x0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi-region@9ea00000 {
+			reg = <0x0 0x9ea00000 0x0 0x4080000>;
+			no-map;
+		};
+
+		mpss_dsm_mem: mpss-dsm-region@d4d00000 {
+			reg = <0x0 0xd4d00000 0x0 0x3300000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts
new file mode 100644
index 000000000000..7fc2de0d3d5e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-aqr115c.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Lemans Ride Rev3";
+	compatible = "qcom,qcs9100-ride-r3", "qcom,qcs9100", "qcom,sa8775p";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs9100-ride.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
new file mode 100644
index 000000000000..b0c5fdde56ae
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-88ea1512.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Lemans Ride";
+	compatible = "qcom,qcs9100-ride", "qcom,qcs9100", "qcom,sa8775p";
+};
diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
index 5a25cdec969e..d125fc77ae14 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
@@ -22,20 +22,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	clocks {
-		xo_board: xo-board-clk {
-			compatible = "fixed-clock";
-			clock-frequency = <19200000>;
-			#clock-cells = <0>;
-		};
-
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-			#clock-cells = <0>;
-		};
-	};
-
 	ppvar_sys: ppvar-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "ppvar_sys";
@@ -239,6 +225,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &qup_i2c1_data_clk {
 	drive-strength = <2>;
 	bias-pull-up;
@@ -500,3 +491,26 @@
 &uart7 {
 	status = "okay";
 };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l8a_0p91>;
+	vdda18-supply = <&vreg_l14a_1p8>;
+	vdda33-supply = <&vreg_l2a_2p3>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l8a_0p91>;
+	vdda-pll-supply = <&vreg_l3a_1p2>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 1c0e5d271e91..846e5e5899aa 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -6,6 +6,8 @@
 #include <dt-bindings/clock/qcom,qdu1000-gcc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -19,26 +21,40 @@
 
 	chosen: chosen { };
 
+	clocks {
+		xo_board: xo-board-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&l2_0>;
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -46,76 +62,76 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
-			next-level-cache = <&L2_100>;
-			L2_100: l2-cache {
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&l2_100>;
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
-			next-level-cache = <&L2_200>;
-			L2_200: l2-cache {
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&l2_200>;
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x300>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
-			next-level-cache = <&L2_300>;
-			L2_300: l2-cache {
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&l2_300>;
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 			};
 		};
@@ -124,7 +140,7 @@
 	idle-states {
 		entry-method = "psci";
 
-		CPU_OFF: cpu-sleep-0 {
+		cpu_off: cpu-sleep-0 {
 			compatible = "arm,idle-state";
 			entry-latency-us = <274>;
 			exit-latency-us = <480>;
@@ -135,7 +151,7 @@
 	};
 
 	domain-idle-states {
-		CLUSTER_SLEEP_0: cluster-sleep-0 {
+		cluster_sleep_0: cluster-sleep-0 {
 			compatible = "domain-idle-state";
 			entry-latency-us = <584>;
 			exit-latency-us = <2332>;
@@ -143,7 +159,7 @@
 			arm,psci-suspend-param = <0x41000044>;
 		};
 
-		CLUSTER_SLEEP_1: cluster-sleep-1 {
+		cluster_sleep_1: cluster-sleep-1 {
 			compatible = "domain-idle-state";
 			entry-latency-us = <2893>;
 			exit-latency-us = <4023>;
@@ -177,7 +193,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -185,33 +201,33 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_OFF>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_off>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_OFF>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_off>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_OFF>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_off>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_OFF>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_off>;
 		};
 
-		CLUSTER_PD: power-domain-cluster {
+		cluster_pd: power-domain-cluster {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
+			domain-idle-states = <&cluster_sleep_0 &cluster_sleep_1>;
 		};
 	};
 
@@ -381,6 +397,20 @@
 			#power-domain-cells = <1>;
 		};
 
+		ecpricc: clock-controller@280000 {
+			compatible = "qcom,qdu1000-ecpricc";
+			reg = <0x0 0x00280000 0x0 0x31c00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		gpi_dma0: dma-controller@900000  {
 			compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x900000 0x0 0x60000>;
@@ -899,6 +929,129 @@
 			};
 		};
 
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,qdu1000-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0x0 0x088e3000 0x0 0x120>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_1_qmpphy: phy@88e5000 {
+			compatible = "qcom,qdu1000-qmp-usb3-uni-phy";
+			reg = <0x0 0x088e5000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB2_CLKREF_EN>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,qdu1000-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&system_noc MASTER_USB3 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &system_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
+
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+				iommus = <&apps_smmu 0xc0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				phys = <&usb_1_hsphy>,
+				       <&usb_1_qmpphy>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,qdu1000-pdc", "qcom,pdc";
 			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
@@ -1276,6 +1429,7 @@
 				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 		};
 
 		intc: interrupt-controller@17200000 {
@@ -1362,7 +1516,7 @@
 			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
 					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
 			label = "apps_rsc";
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
@@ -1445,14 +1599,40 @@
 
 		system-cache-controller@19200000 {
 			compatible = "qcom,qdu1000-llcc";
-			reg = <0 0x19200000 0 0xd80000>,
-			      <0 0x1a200000 0 0x80000>,
-			      <0 0x221c8128 0 0x4>;
-			reg-names = "llcc_base",
-				    "llcc_broadcast_base",
-				    "multi_channel_register";
+			reg = <0 0x19200000 0 0x80000>,
+			      <0 0x19300000 0 0x80000>,
+			      <0 0x19600000 0 0x80000>,
+			      <0 0x19700000 0 0x80000>,
+			      <0 0x19a00000 0 0x80000>,
+			      <0 0x19b00000 0 0x80000>,
+			      <0 0x19e00000 0 0x80000>,
+			      <0 0x19f00000 0 0x80000>,
+			      <0 0x1a200000 0 0x80000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc4_base",
+				    "llcc5_base",
+				    "llcc6_base",
+				    "llcc7_base",
+				    "llcc_broadcast_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-			multi-ch-bit-off = <24 2>;
+
+			nvmem-cells = <&multi_chan_ddr>;
+			nvmem-cell-names = "multi-chan-ddr";
+		};
+
+		sec_qfprom: efuse@221c8000 {
+			compatible = "qcom,qdu1000-sec-qfprom", "qcom,sec-qfprom";
+			reg = <0 0x221c8000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			multi_chan_ddr: multi-chan-ddr@12b {
+				reg = <0x12b 0x1>;
+				bits = <0 2>;
+			};
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index 94885b9c21c8..67ba508e92ba 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -5,9 +5,10 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include "qcm2290.dtsi"
-#include "pm2250.dtsi"
+#include "pm4125.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. Robotics RB1";
@@ -15,6 +16,7 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &uart3;
 		sdhc1 = &sdhc_1;
 		sdhc2 = &sdhc_2;
 	};
@@ -23,6 +25,14 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	clocks {
+		clk40m: can-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+			#clock-cells = <0>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "gpio-keys";
@@ -40,6 +50,28 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	i2c2_gpio: i2c {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&tlmm 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -158,11 +190,139 @@
 	};
 };
 
-&pm2250_resin {
+&cpu_pd0 {
+	/delete-property/ power-domains;
+};
+
+&cpu_pd1 {
+	/delete-property/ power-domains;
+};
+
+&cpu_pd2 {
+	/delete-property/ power-domains;
+};
+
+&cpu_pd3 {
+	/delete-property/ power-domains;
+};
+
+/delete-node/ &cluster_pd;
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/qcm2290/a702_zap.mbn";
+	};
+};
+
+&i2c2_gpio {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_hdmi_out_1p2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm4125_l5>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
+&pm4125_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
 };
 
+&pm4125_typec {
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		typec-power-opmode = "default";
+		pd-disable;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pm4125_hs_in: endpoint {
+					remote-endpoint = <&usb_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pm4125_ss_in: endpoint {
+					remote-endpoint = <&usb_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&pm4125_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <500000>;
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -182,23 +342,23 @@
 		compatible = "qcom,rpm-pm2250-regulators";
 		vdd_s3-supply = <&vph_pwr>;
 		vdd_s4-supply = <&vph_pwr>;
-		vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm2250_s3>;
+		vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm4125_s3>;
 		vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>;
-		vdd_l13_l14_l15_l16-supply = <&pm2250_s4>;
+		vdd_l13_l14_l15_l16-supply = <&pm4125_s4>;
 
 		/*
 		 * S1 - VDD_APC
 		 * S2 - VDD_CX
 		 */
 
-		pm2250_s3: s3 {
+		pm4125_s3: s3 {
 			/* 0.4V-1.6625V -> 1.3V (Power tree requirements) */
 			regulator-min-microvolt = <1352000>;
 			regulator-max-microvolt = <1352000>;
 			regulator-boot-on;
 		};
 
-		pm2250_s4: s4 {
+		pm4125_s4: s4 {
 			/* 1.2V-2.35V -> 2.05V (Power tree requirements) */
 			regulator-min-microvolt = <2072000>;
 			regulator-max-microvolt = <2072000>;
@@ -207,7 +367,7 @@
 
 		/* L1 - VDD_MX */
 
-		pm2250_l2: l2 {
+		pm4125_l2: l2 {
 			/* LPDDR4X VDD2 */
 			regulator-min-microvolt = <1136000>;
 			regulator-max-microvolt = <1136000>;
@@ -215,7 +375,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l3: l3 {
+		pm4125_l3: l3 {
 			/* LPDDR4X VDDQ */
 			regulator-min-microvolt = <616000>;
 			regulator-max-microvolt = <616000>;
@@ -223,14 +383,14 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l4: l4 {
+		pm4125_l4: l4 {
 			/* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2700000>;
 			regulator-allow-set-load;
 		};
 
-		pm2250_l5: l5 {
+		pm4125_l5: l5 {
 			/* CSI/DSI */
 			regulator-min-microvolt = <1232000>;
 			regulator-max-microvolt = <1232000>;
@@ -238,7 +398,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l6: l6 {
+		pm4125_l6: l6 {
 			/* DRAM PLL */
 			regulator-min-microvolt = <928000>;
 			regulator-max-microvolt = <928000>;
@@ -246,7 +406,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l7: l7 {
+		pm4125_l7: l7 {
 			/* Wi-Fi CX/MX */
 			regulator-min-microvolt = <664000>;
 			regulator-max-microvolt = <664000>;
@@ -257,20 +417,20 @@
 		 * L9 - VDD_LPI_MX
 		 */
 
-		pm2250_l10: l10 {
+		pm4125_l10: l10 {
 			/* Wi-Fi RFA */
 			regulator-min-microvolt = <1304000>;
 			regulator-max-microvolt = <1304000>;
 		};
 
-		pm2250_l11: l11 {
+		pm4125_l11: l11 {
 			/* GPS RF1 */
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 			regulator-boot-on;
 		};
 
-		pm2250_l12: l12 {
+		pm4125_l12: l12 {
 			/* USB PHYs */
 			regulator-min-microvolt = <928000>;
 			regulator-max-microvolt = <928000>;
@@ -278,7 +438,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l13: l13 {
+		pm4125_l13: l13 {
 			/* USB/QFPROM/PLLs */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -286,7 +446,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l14: l14 {
+		pm4125_l14: l14 {
 			/* SDHCI1 VQMMC */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -295,7 +455,7 @@
 			regulator-always-on;
 		};
 
-		pm2250_l15: l15 {
+		pm4125_l15: l15 {
 			/* WCD/DSI/BT VDDIO */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -304,38 +464,38 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l16: l16 {
+		pm4125_l16: l16 {
 			/* GPS RF2 */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
 		};
 
-		pm2250_l17: l17 {
+		pm4125_l17: l17 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 		};
 
-		pm2250_l18: l18 {
+		pm4125_l18: l18 {
 			/* VDD_PXn */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
 
-		pm2250_l19: l19 {
+		pm4125_l19: l19 {
 			/* VDD_PXn */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
 
-		pm2250_l20: l20 {
+		pm4125_l20: l20 {
 			/* SDHCI1 VMMC */
 			regulator-min-microvolt = <2400000>;
 			regulator-max-microvolt = <3600000>;
 			regulator-allow-set-load;
 		};
 
-		pm2250_l21: l21 {
+		pm4125_l21: l21 {
 			/* SDHCI2 VMMC */
 			regulator-min-microvolt = <2960000>;
 			regulator-max-microvolt = <3300000>;
@@ -343,7 +503,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l22: l22 {
+		pm4125_l22: l22 {
 			/* Wi-Fi */
 			regulator-min-microvolt = <3312000>;
 			regulator-max-microvolt = <3312000>;
@@ -352,8 +512,8 @@
 };
 
 &sdhc_1 {
-	vmmc-supply = <&pm2250_l20>;
-	vqmmc-supply = <&pm2250_l14>;
+	vmmc-supply = <&pm4125_l20>;
+	vqmmc-supply = <&pm4125_l14>;
 	pinctrl-0 = <&sdc1_state_on>;
 	pinctrl-1 = <&sdc1_state_off>;
 	pinctrl-names = "default", "sleep";
@@ -365,8 +525,8 @@
 };
 
 &sdhc_2 {
-	vmmc-supply = <&pm2250_l21>;
-	vqmmc-supply = <&pm2250_l4>;
+	vmmc-supply = <&pm4125_l21>;
+	vqmmc-supply = <&pm4125_l4>;
 	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
 	pinctrl-0 = <&sdc2_state_on &sd_det_in_on>;
 	pinctrl-1 = <&sdc2_state_off &sd_det_in_off>;
@@ -376,7 +536,94 @@
 	status = "okay";
 };
 
+&spi5 {
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&clk40m>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vdc_5v>;
+		xceiver-supply = <&vdc_5v>;
+	};
+};
+
 &tlmm {
+	uart3_default: uart3-default-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart3_sleep: uart3-sleep-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio41";
+		function = "gpio";
+		input-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio46";
+		function = "gpio";
+		bias-disable;
+	};
+
 	sd_det_in_on: sd-det-in-on-state {
 		pins = "gpio88";
 		function = "gpio";
@@ -399,6 +646,28 @@
 	};
 };
 
+&uart3 {
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
+	pinctrl-0 = <&uart3_default>;
+	pinctrl-1 = <&uart3_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3950-bt";
+
+		vddio-supply = <&pm4125_l15>;
+		vddxo-supply = <&pm4125_l13>;
+		vddrf-supply = <&pm4125_l10>;
+		vddch0-supply = <&pm4125_l22>;
+		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		max-speed = <3200000>;
+	};
+};
+
 /* UART connected to the Micro-USB port via a FTDI chip */
 &uart4 {
 	compatible = "qcom,geni-debug-uart";
@@ -409,24 +678,38 @@
 	status = "okay";
 };
 
+&usb_dwc3_hs {
+	remote-endpoint = <&pm4125_hs_in>;
+};
+
+&usb_hsphy {
+	vdd-supply = <&pm4125_l12>;
+	vdda-pll-supply = <&pm4125_l13>;
+	vdda-phy-dpdm-supply = <&pm4125_l21>;
+	status = "okay";
+};
+
 &usb_qmpphy {
-	vdda-phy-supply = <&pm2250_l12>;
-	vdda-pll-supply = <&pm2250_l13>;
+	vdda-phy-supply = <&pm4125_l12>;
+	vdda-pll-supply = <&pm4125_l13>;
 	status = "okay";
 };
 
-&usb_hsphy {
-	vdd-supply = <&pm2250_l12>;
-	vdda-pll-supply = <&pm2250_l13>;
-	vdda-phy-dpdm-supply = <&pm2250_l21>;
+&usb_qmpphy_out {
+	remote-endpoint = <&pm4125_ss_in>;
+};
+
+&venus {
 	status = "okay";
 };
 
 &wifi {
-	vdd-0.8-cx-mx-supply = <&pm2250_l7>;
-	vdd-1.8-xo-supply = <&pm2250_l13>;
-	vdd-1.3-rfa-supply = <&pm2250_l10>;
-	vdd-3.3-ch0-supply = <&pm2250_l22>;
+	vdd-0.8-cx-mx-supply = <&pm4125_l7>;
+	vdd-1.8-xo-supply = <&pm4125_l13>;
+	vdd-1.3-rfa-supply = <&pm4125_l10>;
+	vdd-3.3-ch0-supply = <&pm4125_l22>;
+	qcom,calibration-variant = "Thundercomm_RB1";
+	firmware-name = "qcm2290";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index a7278a9472ed..bdf2d66e40c6 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -5,9 +5,14 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm4250.dtsi"
 #include "pm6125.dtsi"
+#include "pmi632.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. QRB4210 RB2";
@@ -15,6 +20,7 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &uart3;
 	};
 
 	chosen {
@@ -22,7 +28,7 @@
 	};
 
 	clocks {
-		clk40M: can-clk {
+		clk40m: can-clk {
 			compatible = "fixed-clock";
 			clock-frequency = <40000000>;
 			#clock-cells = <0>;
@@ -57,6 +63,17 @@
 		};
 	};
 
+	i2c2_gpio: i2c {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&tlmm 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -89,6 +106,53 @@
 		};
 	};
 
+	sound {
+		compatible = "qcom,qrb4210-rb2-sndcard";
+		pinctrl-0 = <&lpi_i2s2_active>;
+		pinctrl-names = "default";
+		model = "Qualcomm-RB2-WSA8815-Speakers-DMIC0";
+
+		mm1-dai-link {
+			link-name = "MultiMedia1";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+			};
+		};
+
+		mm2-dai-link {
+			link-name = "MultiMedia2";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+			};
+		};
+
+		mm3-dai-link {
+			link-name = "MultiMedia3";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+			};
+		};
+
+		hdmi-dai-link {
+			link-name = "HDMI Playback";
+
+			cpu {
+				sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&lt9611_codec 0>;
+			};
+		};
+	};
+
 	vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
 		compatible = "regulator-fixed";
 		regulator-name = "VREG_HDMI_OUT_1P2";
@@ -187,7 +251,7 @@
 	};
 };
 
-&i2c2 {
+&i2c2_gpio {
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -255,6 +319,46 @@
 	};
 };
 
+&pmi632_typec {
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		typec-power-opmode = "default";
+		pd-disable;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pmi632_hs_in: endpoint {
+					remote-endpoint = <&usb_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pmi632_ss_in: endpoint {
+					remote-endpoint = <&usb_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&pmi632_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <1000000>;
+	status = "okay";
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -264,6 +368,14 @@
 	status = "okay";
 };
 
+/* SECONDARY I2S uses 1 I2S SD Line for audio on LT9611UXC HDMI Bridge */
+&q6afedai {
+	dai@20 {
+		reg = <SECONDARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -280,6 +392,12 @@
 	status = "okay";
 };
 
+&remoteproc_mpss {
+	firmware-name = "qcom/qrb4210/modem.mbn";
+
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -346,13 +464,16 @@
 		};
 
 		vreg_l8a_0p664: l8 {
-			regulator-min-microvolt = <400000>;
-			regulator-max-microvolt = <728000>;
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <640000>;
 		};
 
 		vreg_l9a_1p8: l9 {
 			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+			regulator-boot-on;
 		};
 
 		vreg_l10a_1p8: l10 {
@@ -389,11 +510,13 @@
 		vreg_l16a_1p3: l16 {
 			regulator-min-microvolt = <1704000>;
 			regulator-max-microvolt = <1904000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l17a_1p3: l17 {
 			regulator-min-microvolt = <1152000>;
 			regulator-max-microvolt = <1384000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l18a_1p232: l18 {
@@ -424,8 +547,9 @@
 		};
 
 		vreg_l23a_3p3: l23 {
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l24a_2p96: l24 {
@@ -471,7 +595,7 @@
 		compatible = "microchip,mcp2518fd";
 		reg = <0>;
 		interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&clk40M>;
+		clocks = <&clk40m>;
 		spi-max-frequency = <10000000>;
 		vdd-supply = <&vdc_5v>;
 		xceiver-supply = <&vdc_5v>;
@@ -479,7 +603,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &tlmm {
@@ -487,6 +611,66 @@
 			       <56 3>, <61 2>, <64 1>,
 			       <68 1>, <72 8>, <96 1>;
 
+	uart3_default: uart3-default-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart3_sleep: uart3-sleep-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	lt9611_rst_pin: lt9611-rst-state {
 		pins = "gpio41";
 		function = "gpio";
@@ -508,6 +692,26 @@
 	};
 };
 
+&uart3 {
+	interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
+	pinctrl-0 = <&uart3_default>;
+	pinctrl-1 = <&uart3_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3988-bt";
+
+		vddio-supply = <&vreg_l9a_1p8>;
+		vddxo-supply = <&vreg_l16a_1p3>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l23a_3p3>;
+		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		max-speed = <3200000>;
+	};
+};
+
 &uart4 {
 	status = "okay";
 };
@@ -516,9 +720,8 @@
 	status = "okay";
 };
 
-&usb_dwc3 {
-	maximum-speed = "super-speed";
-	dr_mode = "peripheral";
+&usb_dwc3_hs {
+	remote-endpoint = <&pmi632_hs_in>;
 };
 
 &usb_hsphy {
@@ -536,6 +739,21 @@
 	status = "okay";
 };
 
+&usb_qmpphy_out {
+	remote-endpoint = <&pmi632_ss_in>;
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>;
+	vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
+	qcom,calibration-variant = "Thundercomm_RB2";
+	firmware-name = "qrb4210";
+
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso
index bb149e577914..771baf7e09e6 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso
@@ -4,12 +4,10 @@
  */
 
 /dts-v1/;
+/plugin/;
 
-#include "qrb5165-rb5.dts"
-
-&camcc {
-	status = "okay";
-};
+#include <dt-bindings/clock/qcom,camcc-sm8250.h>
+#include <dt-bindings/gpio/gpio.h>
 
 &camss {
 	vdda-phy-supply = <&vreg_l5a_0p88>;
@@ -33,6 +31,9 @@
 };
 
 &cci1_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	camera@1a {
 		compatible = "sony,imx577";
 		reg = <0x1a>;
@@ -46,13 +47,12 @@
 		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
 		assigned-clock-rates = <24000000>;
 
-		dovdd-supply  = <&vreg_l7f_1p8>;
+		dovdd-supply = <&vreg_l7f_1p8>;
 		avdd-supply = <&vdc_5v>;
 		dvdd-supply = <&vdc_5v>;
 
 		port {
 			imx577_ep: endpoint {
-				clock-lanes = <1>;
 				link-frequencies = /bits/ 64 <600000000>;
 				data-lanes = <1 2 3 4>;
 				remote-endpoint = <&csiphy2_ep>;
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index c8cd40a462a3..d99448a0732d 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -23,6 +23,7 @@
 
 	aliases {
 		serial0 = &uart12;
+		serial1 = &uart6;
 		sdhc2 = &sdhc_2;
 	};
 
@@ -31,7 +32,7 @@
 	};
 
 	/* Fixed crystal oscillator dedicated to MCP2518FD */
-	clk40M: can-clock {
+	clk40m: can-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <40000000>;
@@ -64,8 +65,8 @@
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
 			default-state = "off";
+			panic-indicator;
 		};
 
 		led-wlan {
@@ -107,10 +108,69 @@
 		regulator-always-on;
 	};
 
+	qca6390-pmu {
+		compatible = "qcom,qca6390-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+
+		vddaon-supply = <&vreg_s6a_0p95>;
+		vddpmu-supply = <&vreg_s2f_0p95>;
+		vddrfa0p95-supply = <&vreg_s2f_0p95>;
+		vddrfa1p3-supply = <&vreg_s8c_1p3>;
+		vddrfa1p9-supply = <&vreg_s5a_1p9>;
+		vddpcie1p3-supply = <&vreg_s8c_1p3>;
+		vddpcie1p9-supply = <&vreg_s5a_1p9>;
+		vddio-supply = <&vreg_s4a_1p8>;
+
+		wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+
 	thermal-zones {
 		conn-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150b_adc_tm 0>;
 
 			trips {
@@ -123,8 +183,6 @@
 		};
 
 		pm8150l-pcb-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 1>;
 
 			trips {
@@ -137,8 +195,6 @@
 		};
 
 		skin-msm-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 0>;
 
 			trips {
@@ -151,8 +207,6 @@
 		};
 
 		wifi-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 1>;
 
 			trips {
@@ -165,8 +219,6 @@
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 0>;
 
 			trips {
@@ -673,15 +725,11 @@
 	qcom,dual-dsi-mode;
 	qcom,master-dsi;
 #endif
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
@@ -733,6 +781,23 @@
 	vdda-pll-supply = <&vreg_l9a_1p2>;
 };
 
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1101";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie1 {
 	status = "okay";
 };
@@ -895,6 +960,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -934,15 +1004,21 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+	};
+
+	dai@3 {
+		direction = <Q6ASM_DAI_RX>;
+		is-compress-dai;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 	};
 };
 
@@ -958,6 +1034,12 @@
 	no-mmc;
 };
 
+&slpi {
+	firmware-name = "qcom/sm8250/Thundercomm/RB5/slpi.mbn";
+
+	status = "okay";
+};
+
 &sound {
 	compatible = "qcom,qrb5165-rb5-sndcard";
 	pinctrl-0 = <&tert_mi2s_active>;
@@ -967,10 +1049,7 @@
 		"SpkrLeft IN", "WSA_SPK1 OUT",
 		"SpkrRight IN", "WSA_SPK2 OUT",
 		"VA DMIC0", "vdd-micb",
-		"VA DMIC1", "vdd-micb",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
+		"VA DMIC1", "vdd-micb";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
@@ -993,6 +1072,14 @@
 		};
 	};
 
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
 	hdmi-dai-link {
 		link-name = "HDMI Playback";
 		cpu {
@@ -1049,7 +1136,7 @@
 	can@0 {
 		compatible = "microchip,mcp2518fd";
 		reg = <0>;
-		clocks = <&clk40M>;
+		clocks = <&clk40m>;
 		interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>;
 		spi-max-frequency = <10000000>;
 		vdd-supply = <&vdc_5v>;
@@ -1263,6 +1350,14 @@
 		"HST_WLAN_UART_TX",
 		"HST_WLAN_UART_RX";
 
+	bt_en_state: bt-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+
 	lt9611_irq_pin: lt9611-irq-state {
 		pins = "gpio63";
 		function = "gpio";
@@ -1294,6 +1389,29 @@
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	wlan_en_state: wlan-default-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6390-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+	};
 };
 
 &uart12 {
@@ -1327,8 +1445,8 @@
 	usb-role-switch;
 };
 
-&usb_1_role_switch_out {
-	remote-endpoint = <&pm8150b_role_switch_in>;
+&usb_1_dwc3_hs_out {
+	remote-endpoint = <&pm8150b_hs_in>;
 };
 
 &usb_1_hsphy {
@@ -1344,7 +1462,6 @@
 
 	vdda-phy-supply = <&vreg_l9a_1p2>;
 	vdda-pll-supply = <&vreg_l18a_0p92>;
-	orientation-switch;
 };
 
 &usb_1_qmpphy_out {
@@ -1425,7 +1542,7 @@
 
 		altmodes {
 			displayport {
-				svid = <0xff01>;
+				svid = /bits/ 16 <0xff01>;
 				vdo = <0x00001c46>;
 			};
 		};
@@ -1436,8 +1553,8 @@
 
 			port@0 {
 				reg = <0>;
-				pm8150b_role_switch_in: endpoint {
-					remote-endpoint = <&usb_1_role_switch_out>;
+				pm8150b_hs_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs_out>;
 				};
 			};
 
diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
index 2a862c83309e..439f5c327dc4 100644
--- a/arch/arm64/boot/dts/qcom/qru1000-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
@@ -22,20 +22,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	clocks {
-		xo_board: xo-board-clk {
-			compatible = "fixed-clock";
-			clock-frequency = <19200000>;
-			#clock-cells = <0>;
-		};
-
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-			#clock-cells = <0>;
-		};
-	};
-
 	ppvar_sys: ppvar-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "ppvar_sys";
@@ -239,6 +225,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &qup_i2c1_data_clk {
 	drive-strength = <2>;
 	bias-pull-up;
@@ -467,3 +458,26 @@
 &uart7 {
 	status = "okay";
 };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l8a_0p91>;
+	vdda18-supply = <&vreg_l14a_1p8>;
+	vdda33-supply = <&vreg_l2a_2p3>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l8a_0p91>;
+	vdda-pll-supply = <&vreg_l3a_1p2>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 5e4287f8c8cd..388d5ecee949 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -283,7 +283,7 @@
 
 		vreg_l13c_2p96: ldo13 {
 			regulator-name = "vreg_l13c_2p96";
-			regulator-min-microvolt = <2504000>;
+			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
@@ -326,7 +326,6 @@
 
 	phy-handle = <&rgmii_phy>;
 	phy-mode = "rgmii";
-	max-speed = <1000>;
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
@@ -367,27 +366,37 @@
 	};
 };
 
+&pmm8155au_1_gpios {
+	pmm8155au_1_sdc2_cd: sdc2-cd-default-state {
+		pins = "gpio4";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		power-source = <0>;
+	};
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
 
 &remoteproc_adsp {
 	status = "okay";
-	firmware-name = "qcom/sa8155p/adsp.mdt";
+	firmware-name = "qcom/sa8155p/adsp.mbn";
 };
 
 &remoteproc_cdsp {
 	status = "okay";
-	firmware-name = "qcom/sa8155p/cdsp.mdt";
+	firmware-name = "qcom/sa8155p/cdsp.mbn";
 };
 
 &sdhc_2 {
 	status = "okay";
 
-	cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
+	pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &pmm8155au_1_sdc2_cd>;
 	vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */
 	vmmc-supply = <&vreg_l17a_2p96>;  /* Card power line */
 	bus-width = <4>;
@@ -505,13 +514,6 @@
 			bias-pull-up;		/* pull up */
 			drive-strength = <16>;	/* 16 MA */
 		};
-
-		sd-cd-pins {
-			pins = "gpio96";
-			function = "gpio";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
 	};
 
 	sdc2_off: sdc2-off-state {
@@ -532,13 +534,6 @@
 			bias-pull-up;		/* pull up */
 			drive-strength = <2>;	/* 2 MA */
 		};
-
-		sd-cd-pins {
-			pins = "gpio96";
-			function = "gpio";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
 	};
 
 	usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {
diff --git a/arch/arm64/boot/dts/qcom/sa8155p.dtsi b/arch/arm64/boot/dts/qcom/sa8155p.dtsi
index ffb7ab695213..d678ed822378 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8155p.dtsi
@@ -9,6 +9,10 @@
 
 #include "sm8150.dtsi"
 
+&camcc {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
 &dispcc {
 	power-domains = <&rpmhpd SA8155P_CX>;
 };
@@ -38,3 +42,7 @@
 	 */
 	compatible = "qcom,sa8155p-rpmhpd";
 };
+
+&videocc {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index fd253942e5e5..64e59299672c 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 #include "sa8540p.dtsi"
 #include "sa8540p-pmics.dtsi"
@@ -34,7 +35,7 @@
 
 		port {
 			dp2_connector_in: endpoint {
-				remote-endpoint = <&mdss1_dp0_phy_out>;
+				remote-endpoint = <&mdss1_dp0_out>;
 			};
 		};
 	};
@@ -48,7 +49,7 @@
 
 		port {
 			dp3_connector_in: endpoint {
-				remote-endpoint = <&mdss1_dp1_phy_out>;
+				remote-endpoint = <&mdss1_dp1_out>;
 			};
 		};
 	};
@@ -62,7 +63,7 @@
 
 		port {
 			edp0_connector_in: endpoint {
-				remote-endpoint = <&mdss0_dp2_phy_out>;
+				remote-endpoint = <&mdss0_dp2_out>;
 			};
 		};
 	};
@@ -76,7 +77,7 @@
 
 		port {
 			edp1_connector_in: endpoint {
-				remote-endpoint = <&mdss0_dp3_phy_out>;
+				remote-endpoint = <&mdss0_dp3_out>;
 			};
 		};
 	};
@@ -90,7 +91,7 @@
 
 		port {
 			edp2_connector_in: endpoint {
-				remote-endpoint = <&mdss1_dp2_phy_out>;
+				remote-endpoint = <&mdss1_dp2_out>;
 			};
 		};
 	};
@@ -104,10 +105,57 @@
 
 		port {
 			edp3_connector_in: endpoint {
-				remote-endpoint = <&mdss1_dp3_phy_out>;
+				remote-endpoint = <&mdss1_dp3_out>;
 			};
 		};
 	};
+
+	regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB2_VBUS";
+		gpio = <&pmm8540c_gpios 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb2_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB3_VBUS";
+		gpio = <&pmm8540e_gpios 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb3_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-usb4-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB4_VBUS";
+		gpio = <&pmm8540g_gpios 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb4_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-usb5-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB5_VBUS";
+		gpio = <&pmm8540g_gpios 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb5_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		gpu_mem: gpu-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x2000>;
+			no-map;
+		};
+	};
 };
 
 &apps_rsc {
@@ -266,25 +314,61 @@
 	status = "okay";
 };
 
-&mdss0 {
+&i2c12 {
+	pinctrl-0 = <&qup1_i2c4_state>;
+	pinctrl-names = "default";
+
 	status = "okay";
+
+	vdd_gfx: regulator@39 {
+		compatible = "maxim,max20411";
+		reg = <0x39>;
+
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <800000>;
+
+		enable-gpios = <&pmm8540a_gpios 2 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&max20411_en>;
+		pinctrl-names = "default";
+	};
 };
 
-&mdss0_dp2 {
-	data-lanes = <0 1 2 3>;
+&gpucc {
+	vdd-gfx-supply = <&vdd_gfx>;
+	status = "okay";
+};
 
+&gmu {
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss0_dp2_phy_out: endpoint {
-				remote-endpoint = <&edp0_connector_in>;
-			};
-		};
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sa8295p/a690_zap.mbn";
 	};
 };
 
+&gpu_smmu {
+	status = "okay";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp2 {
+	status = "okay";
+};
+
+&mdss0_dp2_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&edp0_connector_in>;
+};
+
 &mdss0_dp2_phy {
 	vdda-phy-supply = <&vreg_l8g>;
 	vdda-pll-supply = <&vreg_l3g>;
@@ -293,18 +377,12 @@
 };
 
 &mdss0_dp3 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss0_dp3_phy_out: endpoint {
-				remote-endpoint = <&edp1_connector_in>;
-			};
-		};
-	};
+&mdss0_dp3_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&edp1_connector_in>;
 };
 
 &mdss0_dp3_phy {
@@ -319,18 +397,12 @@
 };
 
 &mdss1_dp0 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss1_dp0_phy_out: endpoint {
-				remote-endpoint = <&dp2_connector_in>;
-			};
-		};
-	};
+&mdss1_dp0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&dp2_connector_in>;
 };
 
 &mdss1_dp0_phy {
@@ -341,18 +413,12 @@
 };
 
 &mdss1_dp1 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss1_dp1_phy_out: endpoint {
-				remote-endpoint = <&dp3_connector_in>;
-			};
-		};
-	};
+&mdss1_dp1_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&dp3_connector_in>;
 };
 
 &mdss1_dp1_phy {
@@ -363,18 +429,12 @@
 };
 
 &mdss1_dp2 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss1_dp2_phy_out: endpoint {
-				remote-endpoint = <&edp2_connector_in>;
-			};
-		};
-	};
+&mdss1_dp2_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&edp2_connector_in>;
 };
 
 &mdss1_dp2_phy {
@@ -385,18 +445,12 @@
 };
 
 &mdss1_dp3 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss1_dp3_phy_out: endpoint {
-				remote-endpoint = <&edp3_connector_in>;
-			};
-		};
-	};
+&mdss1_dp3_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&edp3_connector_in>;
 };
 
 &mdss1_dp3_phy {
@@ -476,6 +530,10 @@
 	status = "okay";
 };
 
+&qup1 {
+	status = "okay";
+};
+
 &qup2 {
 	status = "okay";
 };
@@ -584,6 +642,10 @@
 	status = "okay";
 };
 
+&usb_2 {
+	status = "okay";
+};
+
 &usb_2_hsphy0 {
 	vdda-pll-supply = <&vreg_l5a>;
 	vdda18-supply = <&vreg_l7g>;
@@ -636,6 +698,52 @@
 
 /* PINCTRL */
 
+&pmm8540a_gpios {
+	max20411_en: max20411-en-state {
+		pins = "gpio2";
+		function = "normal";
+		output-enable;
+	};
+};
+
+&pmm8540c_gpios {
+	usb2_en: usb2-en-state {
+		pins = "gpio9";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		output-enable;
+		power-source = <0>;
+	};
+};
+
+&pmm8540e_gpios {
+	usb3_en: usb3-en-state {
+		pins = "gpio5";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		output-enable;
+		power-source = <0>;
+	};
+};
+
+&pmm8540g_gpios {
+	usb4_en: usb4-en-state {
+		pins = "gpio5";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		output-enable;
+		power-source = <0>;
+	};
+
+	usb5_en: usb5-en-state {
+		pins = "gpio9";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		output-enable;
+		power-source = <0>;
+	};
+};
+
 &tlmm {
 	pcie2a_default: pcie2a-default-state {
 		clkreq-n-pins {
@@ -728,4 +836,11 @@
 			bias-pull-up;
 		};
 	};
+
+	qup1_i2c4_state: qup1-i2c4-state {
+		pins = "gpio0", "gpio1";
+		function = "qup12";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index b04f72ec097c..44177e9b64b5 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -155,7 +155,6 @@
 	snps,mtl-rx-config = <&ethernet0_mtl_rx_setup>;
 	snps,mtl-tx-config = <&ethernet0_mtl_tx_setup>;
 
-	max-speed = <1000>;
 	phy-handle = <&rgmii_phy>;
 	phy-mode = "rgmii-txid";
 
@@ -225,7 +224,6 @@
 
 	ethernet0_mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <1>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -257,7 +255,6 @@
 	snps,mtl-rx-config = <&ethernet1_mtl_rx_setup>;
 	snps,mtl-tx-config = <&ethernet1_mtl_tx_setup>;
 
-	max-speed = <1000>;
 	phy-mode = "rgmii-txid";
 
 	pinctrl-names = "default";
@@ -302,7 +299,6 @@
 
 	ethernet1_mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <1>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -376,14 +372,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2a_default>;
 
-	status = "okay";
+	status = "disabled";
 };
 
 &pcie2a_phy {
 	vdda-phy-supply = <&vreg_l11a>;
 	vdda-pll-supply = <&vreg_l3a>;
 
-	status = "okay";
+	status = "disabled";
 };
 
 &pcie3a {
diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi
index 96b2c59ad02b..23888029cc11 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi
@@ -168,6 +168,9 @@
 };
 
 &gpucc {
+	/* SA8295P and SA8540P doesn't provide gfx.lvl */
+	/delete-property/ power-domains;
+
 	status = "disabled";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
new file mode 100644
index 000000000000..b25f0b2c9410
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "lemans-auto.dtsi"
+
+#include "lemans-pmics.dtsi"
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-aqr115c.dtsi"
+
+/ {
+	model = "Qualcomm SA8775P Ride Rev3";
+	compatible = "qcom,sa8775p-ride-r3", "qcom,sa8775p";
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 9760bb4b468c..2d9028cd60be 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -5,830 +5,13 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "lemans-auto.dtsi"
 
-#include "sa8775p.dtsi"
-#include "sa8775p-pmics.dtsi"
+#include "lemans-pmics.dtsi"
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-88ea1512.dtsi"
 
 / {
 	model = "Qualcomm SA8775P Ride";
 	compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
-
-	aliases {
-		ethernet0 = &ethernet0;
-		ethernet1 = &ethernet1;
-		i2c11 = &i2c11;
-		i2c18 = &i2c18;
-		serial0 = &uart10;
-		serial1 = &uart12;
-		serial2 = &uart17;
-		spi16 = &spi16;
-		ufshc1 = &ufs_mem_hc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pmm8654au-rpmh-regulators";
-		qcom,pmic-id = "a";
-
-		vreg_s4a: smps4 {
-			regulator-name = "vreg_s4a";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1816000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s5a: smps5 {
-			regulator-name = "vreg_s5a";
-			regulator-min-microvolt = <1850000>;
-			regulator-max-microvolt = <1996000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s9a: smps9 {
-			regulator-name = "vreg_s9a";
-			regulator-min-microvolt = <535000>;
-			regulator-max-microvolt = <1120000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4a: ldo4 {
-			regulator-name = "vreg_l4a";
-			regulator-min-microvolt = <788000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l5a: ldo5 {
-			regulator-name = "vreg_l5a";
-			regulator-min-microvolt = <870000>;
-			regulator-max-microvolt = <950000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6a: ldo6 {
-			regulator-name = "vreg_l6a";
-			regulator-min-microvolt = <870000>;
-			regulator-max-microvolt = <970000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7a: ldo7 {
-			regulator-name = "vreg_l7a";
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <950000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8a: ldo8 {
-			regulator-name = "vreg_l8a";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9a: ldo9 {
-			regulator-name = "vreg_l9a";
-			regulator-min-microvolt = <2970000>;
-			regulator-max-microvolt = <3544000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pmm8654au-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vreg_l1c: ldo1 {
-			regulator-name = "vreg_l1c";
-			regulator-min-microvolt = <1140000>;
-			regulator-max-microvolt = <1260000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c: ldo2 {
-			regulator-name = "vreg_l2c";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c: ldo3 {
-			regulator-name = "vreg_l3c";
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4c: ldo4 {
-			regulator-name = "vreg_l4c";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			/*
-			 * FIXME: This should have regulator-allow-set-load but
-			 * we're getting an over-current fault from the PMIC
-			 * when switching to LPM.
-			 */
-		};
-
-		vreg_l5c: ldo5 {
-			regulator-name = "vreg_l5c";
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6c: ldo6 {
-			regulator-name = "vreg_l6c";
-			regulator-min-microvolt = <1620000>;
-			regulator-max-microvolt = <1980000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7c: ldo7 {
-			regulator-name = "vreg_l7c";
-			regulator-min-microvolt = <1620000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8c: ldo8 {
-			regulator-name = "vreg_l8c";
-			regulator-min-microvolt = <2400000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9c: ldo9 {
-			regulator-name = "vreg_l9c";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-2 {
-		compatible = "qcom,pmm8654au-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vreg_s4e: smps4 {
-			regulator-name = "vreg_s4e";
-			regulator-min-microvolt = <970000>;
-			regulator-max-microvolt = <1520000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s7e: smps7 {
-			regulator-name = "vreg_s7e";
-			regulator-min-microvolt = <1010000>;
-			regulator-max-microvolt = <1170000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s9e: smps9 {
-			regulator-name = "vreg_s9e";
-			regulator-min-microvolt = <300000>;
-			regulator-max-microvolt = <570000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6e: ldo6 {
-			regulator-name = "vreg_l6e";
-			regulator-min-microvolt = <1280000>;
-			regulator-max-microvolt = <1450000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8e: ldo8 {
-			regulator-name = "vreg_l8e";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1950000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-};
-
-&ethernet0 {
-	phy-mode = "sgmii";
-	phy-handle = <&sgmii_phy0>;
-
-	pinctrl-0 = <&ethernet0_default>;
-	pinctrl-names = "default";
-
-	snps,mtl-rx-config = <&mtl_rx_setup>;
-	snps,mtl-tx-config = <&mtl_tx_setup>;
-	snps,ps-speed = <1000>;
-
-	status = "okay";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sgmii_phy0: phy@8 {
-			compatible = "ethernet-phy-id0141.0dd4";
-			reg = <0x8>;
-			device_type = "ethernet-phy";
-			interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
-			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <11000>;
-			reset-deassert-us = <70000>;
-		};
-
-		sgmii_phy1: phy@a {
-			compatible = "ethernet-phy-id0141.0dd4";
-			reg = <0xa>;
-			device_type = "ethernet-phy";
-			interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
-			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <11000>;
-			reset-deassert-us = <70000>;
-		};
-	};
-
-	mtl_rx_setup: rx-queues-config {
-		snps,rx-queues-to-use = <4>;
-		snps,rx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x0>;
-			snps,route-up;
-			snps,priority = <0x1>;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x1>;
-			snps,route-ptp;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x2>;
-			snps,route-avcp;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x3>;
-			snps,priority = <0xc>;
-		};
-	};
-
-	mtl_tx_setup: tx-queues-config {
-		snps,tx-queues-to-use = <4>;
-		snps,tx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-	};
-};
-
-&ethernet1 {
-	phy-mode = "sgmii";
-	phy-handle = <&sgmii_phy1>;
-
-	snps,mtl-rx-config = <&mtl_rx_setup1>;
-	snps,mtl-tx-config = <&mtl_tx_setup1>;
-	snps,ps-speed = <1000>;
-
-	status = "okay";
-
-	mtl_rx_setup1: rx-queues-config {
-		snps,rx-queues-to-use = <4>;
-		snps,rx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x0>;
-			snps,route-up;
-			snps,priority = <0x1>;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x1>;
-			snps,route-ptp;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x2>;
-			snps,route-avcp;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x3>;
-			snps,priority = <0xc>;
-		};
-	};
-
-	mtl_tx_setup1: tx-queues-config {
-		snps,tx-queues-to-use = <4>;
-		snps,tx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-	};
-};
-
-&i2c11 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&qup_i2c11_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2c18 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&qup_i2c18_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&pmm8654au_0_gpios {
-	gpio-line-names = "DS_EN",
-			  "POFF_COMPLETE",
-			  "UFS0_VER_ID",
-			  "FAST_POFF",
-			  "DBU1_PON_DONE",
-			  "AOSS_SLEEP",
-			  "CAM_DES0_EN",
-			  "CAM_DES1_EN",
-			  "CAM_DES2_EN",
-			  "CAM_DES3_EN",
-			  "UEFI",
-			  "ANALOG_PON_OPT";
-};
-
-&pmm8654au_1_gpios {
-	gpio-line-names = "PMIC_C_ID0",
-			  "PMIC_C_ID1",
-			  "UFS1_VER_ID",
-			  "IPA_PWR",
-			  "",
-			  "WLAN_DBU4_EN",
-			  "WLAN_EN",
-			  "BT_EN",
-			  "USB2_PWR_EN",
-			  "USB2_FAULT";
-
-	usb2_en_state: usb2-en-state {
-		pins = "gpio9";
-		function = "normal";
-		output-high;
-		power-source = <0>;
-	};
-};
-
-&pmm8654au_2_gpios {
-	gpio-line-names = "PMIC_E_ID0",
-			  "PMIC_E_ID1",
-			  "USB0_PWR_EN",
-			  "USB0_FAULT",
-			  "SENSOR_IRQ_1",
-			  "SENSOR_IRQ_2",
-			  "SENSOR_RST",
-			  "SGMIIO0_RST",
-			  "SGMIIO1_RST",
-			  "USB1_PWR_ENABLE",
-			  "USB1_FAULT",
-			  "VMON_SPX8";
-
-	usb0_en_state: usb0-en-state {
-		pins = "gpio3";
-		function = "normal";
-		output-high;
-		power-source = <0>;
-	};
-
-	usb1_en_state: usb1-en-state {
-		pins = "gpio10";
-		function = "normal";
-		output-high;
-		power-source = <0>;
-	};
-};
-
-&pmm8654au_3_gpios {
-	gpio-line-names = "PMIC_G_ID0",
-			  "PMIC_G_ID1",
-			  "GNSS_RST",
-			  "GNSS_EN",
-			  "GNSS_BOOT_MODE";
-};
-
-&qupv3_id_1 {
-	status = "okay";
-};
-
-&qupv3_id_2 {
-	status = "okay";
-};
-
-&serdes0 {
-	phy-supply = <&vreg_l5a>;
-	status = "okay";
-};
-
-&serdes1 {
-	phy-supply = <&vreg_l5a>;
-	status = "okay";
-};
-
-&sleep_clk {
-	clock-frequency = <32764>;
-};
-
-&spi16 {
-	pinctrl-0 = <&qup_spi16_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&tlmm {
-	ethernet0_default: ethernet0-default-state {
-		ethernet0_mdc: ethernet0-mdc-pins {
-			pins = "gpio8";
-			function = "emac0_mdc";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-
-		ethernet0_mdio: ethernet0-mdio-pins {
-			pins = "gpio9";
-			function = "emac0_mdio";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-	};
-
-	qup_uart10_default: qup-uart10-state {
-		pins = "gpio46", "gpio47";
-		function = "qup1_se3";
-	};
-
-	qup_spi16_default: qup-spi16-state {
-		pins = "gpio86", "gpio87", "gpio88", "gpio89";
-		function = "qup2_se2";
-		drive-strength = <6>;
-		bias-disable;
-	};
-
-	qup_i2c11_default: qup-i2c11-state {
-		pins = "gpio48", "gpio49";
-		function = "qup1_se4";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qup_i2c18_default: qup-i2c18-state {
-		pins = "gpio95", "gpio96";
-		function = "qup2_se4";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qup_uart12_default: qup-uart12-state {
-		qup_uart12_cts: qup-uart12-cts-pins {
-			pins = "gpio52";
-			function = "qup1_se5";
-			bias-disable;
-		};
-
-		qup_uart12_rts: qup-uart12-rts-pins {
-			pins = "gpio53";
-			function = "qup1_se5";
-			bias-pull-down;
-		};
-
-		qup_uart12_tx: qup-uart12-tx-pins {
-			pins = "gpio54";
-			function = "qup1_se5";
-			bias-pull-up;
-		};
-
-		qup_uart12_rx: qup-uart12-rx-pins {
-			pins = "gpio55";
-			function = "qup1_se5";
-			bias-pull-down;
-		};
-	};
-
-	qup_uart17_default: qup-uart17-state {
-		qup_uart17_cts: qup-uart17-cts-pins {
-			pins = "gpio91";
-			function = "qup2_se3";
-			bias-disable;
-		};
-
-		qup_uart17_rts: qup0-uart17-rts-pins {
-			pins = "gpio92";
-			function = "qup2_se3";
-			bias-pull-down;
-		};
-
-		qup_uart17_tx: qup0-uart17-tx-pins {
-			pins = "gpio93";
-			function = "qup2_se3";
-			bias-pull-up;
-		};
-
-		qup_uart17_rx: qup0-uart17-rx-pins {
-			pins = "gpio94";
-			function = "qup2_se3";
-			bias-pull-down;
-		};
-	};
-
-	pcie0_default_state: pcie0-default-state {
-		perst-pins {
-			pins = "gpio2";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		clkreq-pins {
-			pins = "gpio1";
-			function = "pcie0_clkreq";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		wake-pins {
-			pins = "gpio0";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	pcie1_default_state: pcie1-default-state {
-		perst-pins {
-			pins = "gpio4";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		clkreq-pins {
-			pins = "gpio3";
-			function = "pcie1_clkreq";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		wake-pins {
-			pins = "gpio5";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&pcie0 {
-	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie0_default_state>;
-
-	status = "okay";
-};
-
-&pcie1 {
-	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie1_default_state>;
-
-	status = "okay";
-};
-
-&pcie0_phy {
-	vdda-phy-supply = <&vreg_l5a>;
-	vdda-pll-supply = <&vreg_l1c>;
-
-	status = "okay";
-};
-
-&pcie1_phy {
-	vdda-phy-supply = <&vreg_l5a>;
-	vdda-pll-supply = <&vreg_l1c>;
-
-	status = "okay";
-};
-
-&uart10 {
-	compatible = "qcom,geni-debug-uart";
-	pinctrl-0 = <&qup_uart10_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart12 {
-	pinctrl-0 = <&qup_uart12_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart17 {
-	pinctrl-0 = <&qup_uart17_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&ufs_mem_hc {
-	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
-	vcc-supply = <&vreg_l8a>;
-	vcc-max-microamp = <1100000>;
-	vccq-supply = <&vreg_l4c>;
-	vccq-max-microamp = <1200000>;
-
-	status = "okay";
-};
-
-&ufs_mem_phy {
-	vdda-phy-supply = <&vreg_l4a>;
-	vdda-pll-supply = <&vreg_l1c>;
-
-	status = "okay";
-};
-
-&usb_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_en_state>;
-
-	status = "okay";
-};
-
-&usb_0_dwc3 {
-	dr_mode = "peripheral";
-};
-
-&usb_0_hsphy {
-	vdda-pll-supply = <&vreg_l7a>;
-	vdda18-supply = <&vreg_l6c>;
-	vdda33-supply = <&vreg_l9a>;
-
-	status = "okay";
-};
-
-&usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l1c>;
-	vdda-pll-supply = <&vreg_l7a>;
-
-	status = "okay";
-};
-
-&usb_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_en_state>;
-
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_1_hsphy {
-	vdda-pll-supply = <&vreg_l7a>;
-	vdda18-supply = <&vreg_l6c>;
-	vdda33-supply = <&vreg_l9a>;
-
-	status = "okay";
-};
-
-&usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l1c>;
-	vdda-pll-supply = <&vreg_l7a>;
-
-	status = "okay";
-};
-
-&usb_2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_en_state>;
-
-	status = "okay";
-};
-
-&usb_2_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_2_hsphy {
-	vdda-pll-supply = <&vreg_l7a>;
-	vdda18-supply = <&vreg_l6c>;
-	vdda33-supply = <&vreg_l9a>;
-
-	status = "okay";
-};
-
-&xo_board_clk {
-	clock-frequency = <38400000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
deleted file mode 100644
index b6a93b11cbbd..000000000000
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ /dev/null
@@ -1,2611 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2023, Linaro Limited
- */
-
-#include <dt-bindings/interconnect/qcom,icc.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,rpmh.h>
-#include <dt-bindings/clock/qcom,sa8775p-gcc.h>
-#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
-#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
-#include <dt-bindings/mailbox/qcom-ipcc.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include <dt-bindings/soc/qcom,rpmh-rsc.h>
-
-/ {
-	interrupt-parent = <&intc>;
-
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	clocks {
-		xo_board_clk: xo-board-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-		};
-
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-		};
-	};
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
-					compatible = "cache";
-					cache-level = <3>;
-					cache-unified;
-				};
-			};
-		};
-
-		CPU1: cpu@100 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x100>;
-			enable-method = "psci";
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU2: cpu@200 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x200>;
-			enable-method = "psci";
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			next-level-cache = <&L2_2>;
-			L2_2: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU3: cpu@300 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x300>;
-			enable-method = "psci";
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			next-level-cache = <&L2_3>;
-			L2_3: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU4: cpu@10000 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x10000>;
-			enable-method = "psci";
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			next-level-cache = <&L2_4>;
-			L2_4: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_1>;
-				L3_1: l3-cache {
-					compatible = "cache";
-					cache-level = <3>;
-					cache-unified;
-				};
-
-			};
-		};
-
-		CPU5: cpu@10100 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x10100>;
-			enable-method = "psci";
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			next-level-cache = <&L2_5>;
-			L2_5: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_1>;
-			};
-		};
-
-		CPU6: cpu@10200 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x10200>;
-			enable-method = "psci";
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			next-level-cache = <&L2_6>;
-			L2_6: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_1>;
-			};
-		};
-
-		CPU7: cpu@10300 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x10300>;
-			enable-method = "psci";
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			next-level-cache = <&L2_7>;
-			L2_7: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_1>;
-			};
-		};
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-
-				core1 {
-					cpu = <&CPU1>;
-				};
-
-				core2 {
-					cpu = <&CPU2>;
-				};
-
-				core3 {
-					cpu = <&CPU3>;
-				};
-			};
-
-			cluster1 {
-				core0 {
-					cpu = <&CPU4>;
-				};
-
-				core1 {
-					cpu = <&CPU5>;
-				};
-
-				core2 {
-					cpu = <&CPU6>;
-				};
-
-				core3 {
-					cpu = <&CPU7>;
-				};
-			};
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-sa8775p", "qcom,scm";
-		};
-	};
-
-	aggre1_noc: interconnect-aggre1-noc {
-		compatible = "qcom,sa8775p-aggre1-noc";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	aggre2_noc: interconnect-aggre2-noc {
-		compatible = "qcom,sa8775p-aggre2-noc";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	clk_virt: interconnect-clk-virt {
-		compatible = "qcom,sa8775p-clk-virt";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	config_noc: interconnect-config-noc {
-		compatible = "qcom,sa8775p-config-noc";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	dc_noc: interconnect-dc-noc {
-		compatible = "qcom,sa8775p-dc-noc";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	gem_noc: interconnect-gem-noc {
-		compatible = "qcom,sa8775p-gem-noc";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	gpdsp_anoc: interconnect-gpdsp-anoc {
-		compatible = "qcom,sa8775p-gpdsp-anoc";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	lpass_ag_noc: interconnect-lpass-ag-noc {
-		compatible = "qcom,sa8775p-lpass-ag-noc";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	mc_virt: interconnect-mc-virt {
-		compatible = "qcom,sa8775p-mc-virt";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	mmss_noc: interconnect-mmss-noc {
-		compatible = "qcom,sa8775p-mmss-noc";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	nspa_noc: interconnect-nspa-noc {
-		compatible = "qcom,sa8775p-nspa-noc";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	nspb_noc: interconnect-nspb-noc {
-		compatible = "qcom,sa8775p-nspb-noc";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	pcie_anoc: interconnect-pcie-anoc {
-		compatible = "qcom,sa8775p-pcie-anoc";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	system_noc: interconnect-system-noc {
-		compatible = "qcom,sa8775p-system-noc";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	/* Will be updated by the bootloader. */
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x0>;
-	};
-
-	qup_opp_table_100mhz: opp-table-qup100mhz {
-		compatible = "operating-points-v2";
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			required-opps = <&rpmhpd_opp_svs_l1>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		sail_ss_mem: sail-ss@80000000 {
-			reg = <0x0 0x80000000 0x0 0x10000000>;
-			no-map;
-		};
-
-		hyp_mem: hyp@90000000 {
-			reg = <0x0 0x90000000 0x0 0x600000>;
-			no-map;
-		};
-
-		xbl_boot_mem: xbl-boot@90600000 {
-			reg = <0x0 0x90600000 0x0 0x200000>;
-			no-map;
-		};
-
-		aop_image_mem: aop-image@90800000 {
-			reg = <0x0 0x90800000 0x0 0x60000>;
-			no-map;
-		};
-
-		aop_cmd_db_mem: aop-cmd-db@90860000 {
-			compatible = "qcom,cmd-db";
-			reg = <0x0 0x90860000 0x0 0x20000>;
-			no-map;
-		};
-
-		uefi_log: uefi-log@908b0000 {
-			reg = <0x0 0x908b0000 0x0 0x10000>;
-			no-map;
-		};
-
-		reserved_mem: reserved@908f0000 {
-			reg = <0x0 0x908f0000 0x0 0xf000>;
-			no-map;
-		};
-
-		secdata_apss_mem: secdata-apss@908ff000 {
-			reg = <0x0 0x908ff000 0x0 0x1000>;
-			no-map;
-		};
-
-		smem_mem: smem@90900000 {
-			compatible = "qcom,smem";
-			reg = <0x0 0x90900000 0x0 0x200000>;
-			no-map;
-			hwlocks = <&tcsr_mutex 3>;
-		};
-
-		cpucp_fw_mem: cpucp-fw@90b00000 {
-			reg = <0x0 0x90b00000 0x0 0x100000>;
-			no-map;
-		};
-
-		lpass_machine_learning_mem: lpass-machine-learning@93b00000 {
-			reg = <0x0 0x93b00000 0x0 0xf00000>;
-			no-map;
-		};
-
-		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@94a00000 {
-			reg = <0x0 0x94a00000 0x0 0x800000>;
-			no-map;
-		};
-
-		pil_camera_mem: pil-camera@95200000 {
-			reg = <0x0 0x95200000 0x0 0x500000>;
-			no-map;
-		};
-
-		pil_adsp_mem: pil-adsp@95c00000 {
-			reg = <0x0 0x95c00000 0x0 0x1e00000>;
-			no-map;
-		};
-
-		pil_gdsp0_mem: pil-gdsp0@97b00000 {
-			reg = <0x0 0x97b00000 0x0 0x1e00000>;
-			no-map;
-		};
-
-		pil_gdsp1_mem: pil-gdsp1@99900000 {
-			reg = <0x0 0x99900000 0x0 0x1e00000>;
-			no-map;
-		};
-
-		pil_cdsp0_mem: pil-cdsp0@9b800000 {
-			reg = <0x0 0x9b800000 0x0 0x1e00000>;
-			no-map;
-		};
-
-		pil_gpu_mem: pil-gpu@9d600000 {
-			reg = <0x0 0x9d600000 0x0 0x2000>;
-			no-map;
-		};
-
-		pil_cdsp1_mem: pil-cdsp1@9d700000 {
-			reg = <0x0 0x9d700000 0x0 0x1e00000>;
-			no-map;
-		};
-
-		pil_cvp_mem: pil-cvp@9f500000 {
-			reg = <0x0 0x9f500000 0x0 0x700000>;
-			no-map;
-		};
-
-		pil_video_mem: pil-video@9fc00000 {
-			reg = <0x0 0x9fc00000 0x0 0x700000>;
-			no-map;
-		};
-
-		hyptz_reserved_mem: hyptz-reserved@beb00000 {
-			reg = <0x0 0xbeb00000 0x0 0x11500000>;
-			no-map;
-		};
-
-		tz_stat_mem: tz-stat@d0000000 {
-			reg = <0x0 0xd0000000 0x0 0x100000>;
-			no-map;
-		};
-
-		tags_mem: tags@d0100000 {
-			reg = <0x0 0xd0100000 0x0 0x1200000>;
-			no-map;
-		};
-
-		qtee_mem: qtee@d1300000 {
-			reg = <0x0 0xd1300000 0x0 0x500000>;
-			no-map;
-		};
-
-		trusted_apps_mem: trusted-apps@d1800000 {
-			reg = <0x0 0xd1800000 0x0 0x3900000>;
-			no-map;
-		};
-	};
-
-	soc: soc@0 {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges = <0 0 0 0 0x10 0>;
-
-		gcc: clock-controller@100000 {
-			compatible = "qcom,sa8775p-gcc";
-			reg = <0x0 0x00100000 0x0 0xc7018>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&sleep_clk>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <&usb_0_qmpphy>,
-				 <&usb_1_qmpphy>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <&pcie0_phy>,
-				 <&pcie1_phy>,
-				 <0>,
-				 <0>,
-				 <0>;
-			power-domains = <&rpmhpd SA8775P_CX>;
-		};
-
-		ipcc: mailbox@408000 {
-			compatible = "qcom,sa8775p-ipcc", "qcom,ipcc";
-			reg = <0x0 0x00408000 0x0 0x1000>;
-			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			#mbox-cells = <2>;
-		};
-
-		qupv3_id_2: geniqup@8c0000 {
-			compatible = "qcom,geni-se-qup";
-			reg = <0x0 0x008c0000 0x0 0x6000>;
-			ranges;
-			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
-				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
-			clock-names = "m-ahb", "s-ahb";
-			iommus = <&apps_smmu 0x5a3 0x0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			status = "disabled";
-
-			i2c14: i2c@880000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x880000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi14: spi@880000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0x880000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c15: i2c@884000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x884000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi15: spi@884000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0x884000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c16: i2c@888000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x888000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi16: spi@888000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0x00888000 0x0 0x4000>;
-				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c17: i2c@88c000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x88c000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi17: spi@88c000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0x88c000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			uart17: serial@88c000 {
-				compatible = "qcom,geni-uart";
-				reg = <0x0 0x0088c000 0x0 0x4000>;
-				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core", "qup-config";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c18: i2c@890000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x00890000 0x0 0x4000>;
-				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			spi18: spi@890000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0x890000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c19: i2c@894000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x894000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi19: spi@894000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0x894000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c20: i2c@898000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x898000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi20: spi@898000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0x898000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-		};
-
-		qupv3_id_0: geniqup@9c0000 {
-			compatible = "qcom,geni-se-qup";
-			reg = <0x0 0x9c0000 0x0 0x6000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "m-ahb", "s-ahb";
-			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
-				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
-			iommus = <&apps_smmu 0x403 0x0>;
-			status = "disabled";
-
-			i2c0: i2c@980000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x980000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi0: spi@980000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0x980000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@984000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x984000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi1: spi@984000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0x984000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@988000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x988000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi2: spi@988000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0x988000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@98c000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x98c000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi3: spi@98c000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0x98c000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c4: i2c@990000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x990000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi4: spi@990000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0x990000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c5: i2c@994000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x994000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi5: spi@994000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0x994000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			uart5: serial@994000 {
-				compatible = "qcom,geni-uart";
-				reg = <0x0 0x994000 0x0 0x4000>;
-				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core", "qup-config";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-		};
-
-		qupv3_id_1: geniqup@ac0000 {
-			compatible = "qcom,geni-se-qup";
-			reg = <0x0 0x00ac0000 0x0 0x6000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "m-ahb", "s-ahb";
-			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
-				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
-			iommus = <&apps_smmu 0x443 0x0>;
-			status = "disabled";
-
-			i2c7: i2c@a80000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0xa80000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi7: spi@a80000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0xa80000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c8: i2c@a84000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0xa84000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi8: spi@a84000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0xa84000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c9: i2c@a88000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0xa88000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi9: spi@a88000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0xa88000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			uart9: serial@a88000 {
-				compatible = "qcom,geni-uart";
-				reg = <0x0 0xa88000 0x0 0x4000>;
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core", "qup-config";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c10: i2c@a8c000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0xa8c000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi10: spi@a8c000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0xa8c000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			uart10: serial@a8c000 {
-				compatible = "qcom,geni-uart";
-				reg = <0x0 0x00a8c000 0x0 0x4000>;
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
-				interconnect-names = "qup-core", "qup-config";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0
-						 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0
-						 &config_noc SLAVE_QUP_1 0>;
-				power-domains = <&rpmhpd SA8775P_CX>;
-				operating-points-v2 = <&qup_opp_table_100mhz>;
-				status = "disabled";
-			};
-
-			i2c11: i2c@a90000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0xa90000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi11: spi@a90000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0xa90000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c12: i2c@a94000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0xa94000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi12: spi@a94000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0xa94000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			uart12: serial@a94000 {
-				compatible = "qcom,geni-uart";
-				reg = <0x0 0x00a94000 0x0 0x4000>;
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core", "qup-config";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			i2c13: i2c@a98000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0xa98000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
-						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
-						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
-						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-						     "qup-config",
-						     "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-		};
-
-		qupv3_id_3: geniqup@bc0000 {
-			compatible = "qcom,geni-se-qup";
-			reg = <0x0 0xbc0000 0x0 0x6000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "m-ahb", "s-ahb";
-			clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>,
-				<&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>;
-			iommus = <&apps_smmu 0x43 0x0>;
-			status = "disabled";
-
-			i2c21: i2c@b80000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0x0 0xb80000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
-						&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
-					   <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						&config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
-					   <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
-						&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-							 "qup-config",
-							 "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-
-			spi21: spi@b80000 {
-				compatible = "qcom,geni-spi";
-				reg = <0x0 0xb80000 0x0 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
-				clock-names = "se";
-				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
-						&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
-					   <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						&config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
-					   <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
-						&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-				interconnect-names = "qup-core",
-							 "qup-config",
-							 "qup-memory";
-				power-domains = <&rpmhpd SA8775P_CX>;
-				status = "disabled";
-			};
-		};
-
-		ufs_mem_hc: ufs@1d84000 {
-			compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
-			reg = <0x0 0x01d84000 0x0 0x3000>;
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy>;
-			phy-names = "ufsphy";
-			lanes-per-direction = <2>;
-			#reset-cells = <1>;
-			resets = <&gcc GCC_UFS_PHY_BCR>;
-			reset-names = "rst";
-			power-domains = <&gcc UFS_PHY_GDSC>;
-			required-opps = <&rpmhpd_opp_nom>;
-			iommus = <&apps_smmu 0x100 0x0>;
-			dma-coherent;
-			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
-				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
-				 <&gcc GCC_UFS_PHY_AHB_CLK>,
-				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
-				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
-				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-			clock-names = "core_clk",
-				      "bus_aggr_clk",
-				      "iface_clk",
-				      "core_clk_unipro",
-				      "ref_clk",
-				      "tx_lane0_sync_clk",
-				      "rx_lane0_sync_clk",
-				      "rx_lane1_sync_clk";
-			freq-table-hz = <75000000 300000000>,
-					<0 0>,
-					<0 0>,
-					<75000000 300000000>,
-					<0 0>,
-					<0 0>,
-					<0 0>,
-					<0 0>;
-			qcom,ice = <&ice>;
-			status = "disabled";
-		};
-
-		ufs_mem_phy: phy@1d87000 {
-			compatible = "qcom,sa8775p-qmp-ufs-phy";
-			reg = <0x0 0x01d87000 0x0 0xe10>;
-			/*
-			 * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It
-			 * enables the CXO clock to eDP *and* UFS PHY.
-			 */
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
-				 <&gcc GCC_EDP_REF_CLKREF_EN>;
-			clock-names = "ref", "ref_aux", "qref";
-			power-domains = <&gcc UFS_PHY_GDSC>;
-			resets = <&ufs_mem_hc 0>;
-			reset-names = "ufsphy";
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		ice: crypto@1d88000 {
-			compatible = "qcom,sa8775p-inline-crypto-engine",
-				     "qcom,inline-crypto-engine";
-			reg = <0x0 0x01d88000 0x0 0x8000>;
-			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
-		};
-
-		usb_0_hsphy: phy@88e4000 {
-			compatible = "qcom,sa8775p-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e4000 0 0x120>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_0_qmpphy: phy@88e8000 {
-			compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
-			reg = <0 0x088e8000 0 0x2000>;
-
-			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_CLKREF_EN>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-			clock-names = "aux", "ref", "com_aux", "pipe";
-
-			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
-			reset-names = "phy", "phy_phy";
-
-			power-domains = <&gcc USB30_PRIM_GDSC>;
-
-			#clock-cells = <0>;
-			clock-output-names = "usb3_prim_phy_pipe_clk_src";
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_0: usb@a6f8800 {
-			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
-				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
-				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
-			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
-
-			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <200000000>;
-
-			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
-					  "dp_hs_phy_irq",
-					  "dm_hs_phy_irq",
-					  "ss_phy_irq";
-
-			power-domains = <&gcc USB30_PRIM_GDSC>;
-			required-opps = <&rpmhpd_opp_nom>;
-
-			resets = <&gcc GCC_USB30_PRIM_BCR>;
-
-			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
-			interconnect-names = "usb-ddr", "apps-usb";
-
-			wakeup-source;
-
-			status = "disabled";
-
-			usb_0_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xe000>;
-				interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x080 0x0>;
-				phys = <&usb_0_hsphy>, <&usb_0_qmpphy>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usb_1_hsphy: phy@88e6000 {
-			compatible = "qcom,sa8775p-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e6000 0 0x120>;
-			clocks = <&gcc GCC_USB_CLKREF_EN>;
-			clock-names = "ref";
-			resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_1_qmpphy: phy@88ea000 {
-			compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
-			reg = <0 0x088ea000 0 0x2000>;
-
-			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-			clock-names = "aux", "ref", "com_aux", "pipe";
-
-			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
-			reset-names = "phy", "phy_phy";
-
-			power-domains = <&gcc USB30_SEC_GDSC>;
-
-			#clock-cells = <0>;
-			clock-output-names = "usb3_sec_phy_pipe_clk_src";
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_1: usb@a8f8800 {
-			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
-			reg = <0 0x0a8f8800 0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
-				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
-				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
-				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
-				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
-			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
-
-			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <200000000>;
-
-			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 7 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
-					  "dp_hs_phy_irq",
-					  "dm_hs_phy_irq",
-					  "ss_phy_irq";
-
-			power-domains = <&gcc USB30_SEC_GDSC>;
-			required-opps = <&rpmhpd_opp_nom>;
-
-			resets = <&gcc GCC_USB30_SEC_BCR>;
-
-			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
-			interconnect-names = "usb-ddr", "apps-usb";
-
-			wakeup-source;
-
-			status = "disabled";
-
-			usb_1_dwc3: usb@a800000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a800000 0 0xe000>;
-				interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x0a0 0x0>;
-				phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usb_2_hsphy: phy@88e7000 {
-			compatible = "qcom,sa8775p-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e7000 0 0x120>;
-			clocks = <&gcc GCC_USB_CLKREF_EN>;
-			clock-names = "ref";
-			resets = <&gcc GCC_USB3_PHY_TERT_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2: usb@a4f8800 {
-			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
-			reg = <0 0x0a4f8800 0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB20_MASTER_CLK>,
-				 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB20_SLEEP_CLK>,
-				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
-			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
-
-			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB20_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <200000000>;
-
-			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 10 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 9 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "pwr_event",
-					  "dp_hs_phy_irq",
-					  "dm_hs_phy_irq";
-
-			power-domains = <&gcc USB20_PRIM_GDSC>;
-			required-opps = <&rpmhpd_opp_nom>;
-
-			resets = <&gcc GCC_USB20_PRIM_BCR>;
-
-			interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>;
-			interconnect-names = "usb-ddr", "apps-usb";
-
-			wakeup-source;
-
-			status = "disabled";
-
-			usb_2_dwc3: usb@a400000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a400000 0 0xe000>;
-				interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x020 0x0>;
-				phys = <&usb_2_hsphy>;
-				phy-names = "usb2-phy";
-			};
-		};
-
-		tcsr_mutex: hwlock@1f40000 {
-			compatible = "qcom,tcsr-mutex";
-			reg = <0x0 0x01f40000 0x0 0x20000>;
-			#hwlock-cells = <1>;
-		};
-
-		gpucc: clock-controller@3d90000 {
-			compatible = "qcom,sa8775p-gpucc";
-			reg = <0x0 0x03d90000 0x0 0xa000>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
-				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
-			clock-names = "bi_tcxo",
-				      "gcc_gpu_gpll0_clk_src",
-				      "gcc_gpu_gpll0_div_clk_src";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
-
-		adreno_smmu: iommu@3da0000 {
-			compatible = "qcom,sa8775p-smmu-500", "qcom,adreno-smmu",
-				     "qcom,smmu-500", "arm,mmu-500";
-			reg = <0x0 0x03da0000 0x0 0x20000>;
-			#iommu-cells = <2>;
-			#global-interrupts = <2>;
-			dma-coherent;
-			power-domains = <&gpucc GPU_CC_CX_GDSC>;
-			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
-				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
-				 <&gpucc GPU_CC_AHB_CLK>,
-				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
-				 <&gpucc GPU_CC_CX_GMU_CLK>,
-				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
-				 <&gpucc GPU_CC_HUB_AON_CLK>;
-			clock-names = "gcc_gpu_memnoc_gfx_clk",
-				      "gcc_gpu_snoc_dvm_gfx_clk",
-				      "gpu_cc_ahb_clk",
-				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
-				      "gpu_cc_cx_gmu_clk",
-				      "gpu_cc_hub_cx_int_clk",
-				      "gpu_cc_hub_aon_clk";
-			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		serdes0: phy@8901000 {
-			compatible = "qcom,sa8775p-dwmac-sgmii-phy";
-			reg = <0x0 0x08901000 0x0 0xe10>;
-			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
-			clock-names = "sgmi_ref";
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		serdes1: phy@8902000 {
-			compatible = "qcom,sa8775p-dwmac-sgmii-phy";
-			reg = <0x0 0x08902000 0x0 0xe10>;
-			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
-			clock-names = "sgmi_ref";
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		pdc: interrupt-controller@b220000 {
-			compatible = "qcom,sa8775p-pdc", "qcom,pdc";
-			reg = <0x0 0x0b220000 0x0 0x30000>,
-			      <0x0 0x17c000f0 0x0 0x64>;
-			qcom,pdc-ranges = <0 480 40>,
-					  <40 140 14>,
-					  <54 263 1>,
-					  <55 306 4>,
-					  <59 312 3>,
-					  <62 374 2>,
-					  <64 434 2>,
-					  <66 438 2>,
-					  <70 520 1>,
-					  <73 523 1>,
-					  <118 568 6>,
-					  <124 609 3>,
-					  <159 638 1>,
-					  <160 720 3>,
-					  <169 728 30>,
-					  <199 416 2>,
-					  <201 449 1>,
-					  <202 89 1>,
-					  <203 451 1>,
-					  <204 462 1>,
-					  <205 264 1>,
-					  <206 579 1>,
-					  <207 653 1>,
-					  <208 656 1>,
-					  <209 659 1>,
-					  <210 122 1>,
-					  <211 699 1>,
-					  <212 705 1>,
-					  <213 450 1>,
-					  <214 643 2>,
-					  <216 646 5>,
-					  <221 390 5>,
-					  <226 700 2>,
-					  <228 440 1>,
-					  <229 663 1>,
-					  <230 524 2>,
-					  <232 612 3>,
-					  <235 723 5>;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&intc>;
-			interrupt-controller;
-		};
-
-		aoss_qmp: power-management@c300000 {
-			compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp";
-			reg = <0x0 0x0c300000 0x0 0x400>;
-			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
-					       IPCC_MPROC_SIGNAL_GLINK_QMP
-					       IRQ_TYPE_EDGE_RISING>;
-			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
-			#clock-cells = <0>;
-		};
-
-		spmi_bus: spmi@c440000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x0 0x0c440000 0x0 0x1100>,
-			      <0x0 0x0c600000 0x0 0x2000000>,
-			      <0x0 0x0e600000 0x0 0x100000>,
-			      <0x0 0x0e700000 0x0 0xa0000>,
-			      <0x0 0x0c40a000 0x0 0x26000>;
-			reg-names = "core",
-				    "chnls",
-				    "obsrvr",
-				    "intr",
-				    "cnfg";
-			qcom,channel = <0>;
-			qcom,ee = <0>;
-			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "periph_irq";
-			interrupt-controller;
-			#interrupt-cells = <4>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-		};
-
-		tlmm: pinctrl@f000000 {
-			compatible = "qcom,sa8775p-tlmm";
-			reg = <0x0 0x0f000000 0x0 0x1000000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 149>;
-			wakeup-parent = <&pdc>;
-		};
-
-		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
-			reg = <0x0 0x15000000 0x0 0x100000>;
-			#iommu-cells = <2>;
-			#global-interrupts = <2>;
-
-			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pcie_smmu: iommu@15200000 {
-			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
-			reg = <0x0 0x15200000 0x0 0x80000>;
-			#iommu-cells = <2>;
-			#global-interrupts = <2>;
-
-			interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 925 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 926 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 927 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 928 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 955 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 956 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 957 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 958 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 888 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 855 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		intc: interrupt-controller@17a00000 {
-			compatible = "arm,gic-v3";
-			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
-			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			#redistributor-regions = <1>;
-			redistributor-stride = <0x0 0x20000>;
-		};
-
-		watchdog@17c10000 {
-			compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt";
-			reg = <0x0 0x17c10000 0x0 0x1000>;
-			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		memtimer: timer@17c20000 {
-			compatible = "arm,armv7-timer-mem";
-			reg = <0x0 0x17c20000 0x0 0x1000>;
-			ranges = <0x0 0x0 0x0 0x20000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			frame@17c21000 {
-				reg = <0x17c21000 0x1000>,
-				      <0x17c22000 0x1000>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-				frame-number = <0>;
-			};
-
-			frame@17c23000 {
-				reg = <0x17c23000 0x1000>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				frame-number = <1>;
-				status = "disabled";
-			};
-
-			frame@17c25000 {
-				reg = <0x17c25000 0x1000>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				frame-number = <2>;
-				status = "disabled";
-			};
-
-			frame@17c27000 {
-				reg = <0x17c27000 0x1000>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				frame-number = <3>;
-				status = "disabled";
-			};
-
-			frame@17c29000 {
-				reg = <0x17c29000 0x1000>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				frame-number = <4>;
-				status = "disabled";
-			};
-
-			frame@17c2b000 {
-				reg = <0x17c2b000 0x1000>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				frame-number = <5>;
-				status = "disabled";
-			};
-
-			frame@17c2d000 {
-				reg = <0x17c2d000 0x1000>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				frame-number = <6>;
-				status = "disabled";
-			};
-		};
-
-		apps_rsc: rsc@18200000 {
-			compatible = "qcom,rpmh-rsc";
-			reg = <0x0 0x18200000 0x0 0x10000>,
-			      <0x0 0x18210000 0x0 0x10000>,
-			      <0x0 0x18220000 0x0 0x10000>;
-			reg-names = "drv-0", "drv-1", "drv-2";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-			      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-			      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,tcs-offset = <0xd00>;
-			qcom,drv-id = <2>;
-			qcom,tcs-config = <ACTIVE_TCS 2>,
-					  <SLEEP_TCS 3>,
-					  <WAKE_TCS 3>,
-					  <CONTROL_TCS 0>;
-			label = "apps_rsc";
-
-			apps_bcm_voter: bcm-voter {
-				compatible = "qcom,bcm-voter";
-			};
-
-			rpmhcc: clock-controller {
-				compatible = "qcom,sa8775p-rpmh-clk";
-				#clock-cells = <1>;
-				clock-names = "xo";
-				clocks = <&xo_board_clk>;
-			};
-
-			rpmhpd: power-controller {
-				compatible = "qcom,sa8775p-rpmhpd";
-				#power-domain-cells = <1>;
-				operating-points-v2 = <&rpmhpd_opp_table>;
-
-				rpmhpd_opp_table: opp-table {
-					compatible = "operating-points-v2";
-
-					rpmhpd_opp_ret: opp-0 {
-						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
-					};
-
-					rpmhpd_opp_min_svs: opp-1 {
-						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-					};
-
-					rpmhpd_opp_low_svs: opp2 {
-						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					};
-
-					rpmhpd_opp_svs: opp3 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					};
-
-					rpmhpd_opp_svs_l1: opp-4 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					};
-
-					rpmhpd_opp_nom: opp-5 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					};
-
-					rpmhpd_opp_nom_l1: opp-6 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					};
-
-					rpmhpd_opp_nom_l2: opp-7 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
-					};
-
-					rpmhpd_opp_turbo: opp-8 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					};
-
-					rpmhpd_opp_turbo_l1: opp-9 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					};
-				};
-			};
-		};
-
-		cpufreq_hw: cpufreq@18591000 {
-			compatible = "qcom,sa8775p-cpufreq-epss",
-				     "qcom,cpufreq-epss";
-			reg = <0x0 0x18591000 0x0 0x1000>,
-			      <0x0 0x18593000 0x0 0x1000>;
-			reg-names = "freq-domain0", "freq-domain1";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
-			clock-names = "xo", "alternate";
-
-			#freq-domain-cells = <1>;
-		};
-
-		ethernet1: ethernet@23000000 {
-			compatible = "qcom,sa8775p-ethqos";
-			reg = <0x0 0x23000000 0x0 0x10000>,
-			      <0x0 0x23016000 0x0 0x100>;
-			reg-names = "stmmaceth", "rgmii";
-
-			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
-				 <&gcc GCC_EMAC1_SLV_AHB_CLK>,
-				 <&gcc GCC_EMAC1_PTP_CLK>,
-				 <&gcc GCC_EMAC1_PHY_AUX_CLK>;
-			clock-names = "stmmaceth",
-				      "pclk",
-				      "ptp_ref",
-				      "phyaux";
-
-			power-domains = <&gcc EMAC1_GDSC>;
-
-			phys = <&serdes1>;
-			phy-names = "serdes";
-
-			iommus = <&apps_smmu 0x140 0xf>;
-
-			snps,tso;
-			snps,pbl = <32>;
-			rx-fifo-depth = <16384>;
-			tx-fifo-depth = <16384>;
-
-			status = "disabled";
-		};
-
-		ethernet0: ethernet@23040000 {
-			compatible = "qcom,sa8775p-ethqos";
-			reg = <0x0 0x23040000 0x0 0x10000>,
-			      <0x0 0x23056000 0x0 0x100>;
-			reg-names = "stmmaceth", "rgmii";
-
-			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
-				 <&gcc GCC_EMAC0_SLV_AHB_CLK>,
-				 <&gcc GCC_EMAC0_PTP_CLK>,
-				 <&gcc GCC_EMAC0_PHY_AUX_CLK>;
-			clock-names = "stmmaceth",
-				      "pclk",
-				      "ptp_ref",
-				      "phyaux";
-
-			power-domains = <&gcc EMAC0_GDSC>;
-
-			phys = <&serdes0>;
-			phy-names = "serdes";
-
-			iommus = <&apps_smmu 0x120 0xf>;
-
-			snps,tso;
-			snps,pbl = <32>;
-			rx-fifo-depth = <16384>;
-			tx-fifo-depth = <16384>;
-
-			status = "disabled";
-		};
-	};
-
-	arch_timer: timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	pcie0: pci@1c00000{
-		compatible = "qcom,pcie-sa8775p";
-		reg = <0x0 0x01c00000 0x0 0x3000>,
-		      <0x0 0x40000000 0x0 0xf20>,
-		      <0x0 0x40000f20 0x0 0xa8>,
-		      <0x0 0x40001000 0x0 0x4000>,
-		      <0x0 0x40100000 0x0 0x100000>,
-		      <0x0 0x01c03000 0x0 0x1000>;
-		reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
-		device_type = "pci";
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
-			 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
-		bus-range = <0x00 0xff>;
-
-		dma-coherent;
-
-		linux,pci-domain = <0>;
-		num-lanes = <2>;
-
-		interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi0", "msi1", "msi2", "msi3",
-				  "msi4", "msi5", "msi6", "msi7";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
-
-		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
-			 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-			 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
-			 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
-			 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
-
-		clock-names = "aux",
-			      "cfg",
-			      "bus_master",
-			      "bus_slave",
-			      "slave_q2a";
-
-		assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
-		assigned-clock-rates = <19200000>;
-
-		interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
-				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
-		interconnect-names = "pcie-mem", "cpu-pcie";
-
-		iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
-			    <0x100 &pcie_smmu 0x0001 0x1>;
-
-		resets = <&gcc GCC_PCIE_0_BCR>;
-		reset-names = "pci";
-		power-domains = <&gcc PCIE_0_GDSC>;
-
-		phys = <&pcie0_phy>;
-		phy-names = "pciephy";
-
-		status = "disabled";
-	};
-
-	pcie0_phy: phy@1c04000 {
-		compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
-		reg = <0x0 0x1c04000 0x0 0x2000>;
-
-		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
-			 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-			 <&gcc GCC_PCIE_CLKREF_EN>,
-			 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
-			 <&gcc GCC_PCIE_0_PIPE_CLK>,
-			 <&gcc GCC_PCIE_0_PIPEDIV2_CLK>,
-			 <&gcc GCC_PCIE_0_PHY_AUX_CLK>;
-
-		clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
-			      "pipediv2", "phy_aux";
-
-		assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
-		assigned-clock-rates = <100000000>;
-
-		resets = <&gcc GCC_PCIE_0_PHY_BCR>;
-		reset-names = "phy";
-
-		#clock-cells = <0>;
-		clock-output-names = "pcie_0_pipe_clk";
-
-		#phy-cells = <0>;
-
-		status = "disabled";
-	};
-
-	pcie1: pci@1c10000{
-		compatible = "qcom,pcie-sa8775p";
-		reg = <0x0 0x01c10000 0x0 0x3000>,
-		      <0x0 0x60000000 0x0 0xf20>,
-		      <0x0 0x60000f20 0x0 0xa8>,
-		      <0x0 0x60001000 0x0 0x4000>,
-		      <0x0 0x60100000 0x0 0x100000>,
-		      <0x0 0x01c13000 0x0 0x1000>;
-		reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
-		device_type = "pci";
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
-			 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x1fd00000>;
-		bus-range = <0x00 0xff>;
-
-		dma-coherent;
-
-		linux,pci-domain = <1>;
-		num-lanes = <4>;
-
-		interrupts = <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi0", "msi1", "msi2", "msi3",
-				  "msi4", "msi5", "msi6", "msi7";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-
-		clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
-			 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
-			 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
-			 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
-			 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
-
-		clock-names = "aux",
-			      "cfg",
-			      "bus_master",
-			      "bus_slave",
-			      "slave_q2a";
-
-		assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
-		assigned-clock-rates = <19200000>;
-
-		interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
-				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>;
-		interconnect-names = "pcie-mem", "cpu-pcie";
-
-		iommu-map = <0x0 &pcie_smmu 0x0080 0x1>,
-			    <0x100 &pcie_smmu 0x0081 0x1>;
-
-		resets = <&gcc GCC_PCIE_1_BCR>;
-		reset-names = "pci";
-		power-domains = <&gcc PCIE_1_GDSC>;
-
-		phys = <&pcie1_phy>;
-		phy-names = "pciephy";
-
-		status = "disabled";
-	};
-
-	pcie1_phy: phy@1c14000 {
-		compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
-		reg = <0x0 0x1c14000 0x0 0x4000>;
-
-		clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
-			 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
-			 <&gcc GCC_PCIE_CLKREF_EN>,
-			 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
-			 <&gcc GCC_PCIE_1_PIPE_CLK>,
-			 <&gcc GCC_PCIE_1_PIPEDIV2_CLK>,
-			 <&gcc GCC_PCIE_1_PHY_AUX_CLK>;
-
-		clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
-			      "pipediv2", "phy_aux";
-
-		assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
-		assigned-clock-rates = <100000000>;
-
-		resets = <&gcc GCC_PCIE_1_PHY_BCR>;
-		reset-names = "phy";
-
-		#clock-cells = <0>;
-		clock-output-names = "pcie_1_pipe_clk";
-
-		#phy-cells = <0>;
-
-		status = "disabled";
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts b/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts
new file mode 100644
index 000000000000..74778a5b19ba
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sar2130p.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+	model = "Qualcomm Snapdragon AR2 Gen1 Smart Viewer Development Kit";
+	compatible = "qcom,qar2130p", "qcom,sar2130p";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart11;
+		serial1 = &uart7;
+		i2c0 = &i2c8;
+		i2c1 = &i2c10;
+		mmc1 = &sdhc_1;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+	};
+
+	/* pm3003a on I2C0, should not be controlled */
+	vreg_ext_1p3: regulator-ext-1p3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_ext_1p3";
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	/* EBI rail, used as LDO input, can not be part of PMIC config */
+	vreg_s10a_0p89: regulator-s10a-0p89 {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_s10a_0p89";
+		regulator-min-microvolt = <890000>;
+		regulator-max-microvolt = <890000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	thermal-zones {
+		sar2130p-thermal {
+			thermal-sensors = <&pm8150_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wifi-thermal {
+			thermal-sensors = <&pm8150_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <52000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			thermal-sensors = <&pm8150_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-0 = <&wlan_en_state>, <&bt_en_state>;
+		pinctrl-names = "default";
+
+		wlan-enable-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s4a_0p95>;
+		vddio-supply = <&vreg_l15a_1p8>;
+		vddaon-supply = <&vreg_s4a_0p95>;
+		vdddig-supply = <&vreg_s4a_0p95>;
+		vddrfa1p2-supply = <&vreg_s4a_0p95>;
+		vddrfa1p8-supply = <&vreg_s5a_1p88>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s4a_0p95>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_ext_1p3>;
+		vdd-l6-l9-supply = <&vreg_s10a_0p89>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p88>;
+
+		vreg_s4a_0p95: smps6 {
+			regulator-name = "vreg_s4a_0p95";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p88: smps5 {
+			regulator-name = "vreg_s5a_1p88";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1a_0p91: ldo1 {
+			regulator-name = "vreg_l1a_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3080000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_1p2: ldo3 {
+			regulator-name = "vreg_l3a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* ldo4 1.26 - system ? */
+
+		vreg_l5a_1p13: ldo5 {
+			regulator-name = "vreg_l5a_1p13";
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_0p6: ldo6 {
+			regulator-name = "vreg_l6a_0p6";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <650000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_0p88: ldo8 {
+			regulator-name = "vreg_l8a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* ldo9 - LCX */
+
+		vreg_l10a_2p95: ldo10 {
+			regulator-name = "vreg_l10a_2p95";
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* ldo11 - LMX */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* no ldo13 */
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* no ldo16 - system */
+
+		vreg_l17a_3p26: ldo17 {
+			regulator-name = "vreg_l17a_3p26";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_1p2: ldo18 {
+			regulator-name = "vreg_l18a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sar2130p/a620_zap.mbn";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	ptn3222: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+
+		reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+
+		vdd3v3-supply = <&vreg_l2a_3p1>;
+		vdd1v8-supply = <&vreg_l15a_1p8>;
+
+		#phy-cells = <0>;
+	};
+};
+
+&i2c10 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l8a_0p88>;
+	vdda-pll-supply = <&vreg_l3a_1p2>;
+
+	status = "okay";
+};
+
+&pm8150_adc {
+	channel@4c {
+		reg = <ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "xo_therm";
+	};
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "skin_therm";
+	};
+
+	channel@4e {
+		/* msm-5.10 uses ADC5_AMUX_THM2 / 0x0e, although there is a pullup */
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "wifi_therm";
+	};
+};
+
+&pm8150_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	skin-therm@1 {
+		reg = <1>;
+		io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wifi-therm@2 {
+		reg = <2>;
+		/* msm-5.10 uses ADC5_AMUX_THM2, although there is a pullup */
+		io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sar2130p/adsp.mbn";
+
+	status = "okay";
+};
+
+&sdhc_1 {
+	vmmc-supply = <&vreg_l10a_2p95>;
+	vqmmc-supply = <&vreg_l7a_1p8>;
+
+	status = "okay";
+};
+
+&tlmm {
+	bt_en_state: bt-enable-state {
+		pins = "gpio46";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	pcie0_default_state: pcie0-default-state {
+		perst-pins {
+			pins = "gpio55";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio56";
+			function = "pcie0_clkreqn";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio57";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-pins {
+			pins = "gpio58";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio59";
+			function = "pcie1_clkreqn";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio60";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	wlan_en_state: wlan-enable-state {
+		pins = "gpio45";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+};
+
+&uart7 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&uart11 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l8a_0p88>;
+	vdda12-supply = <&vreg_l3a_1p2>;
+
+	phys = <&ptn3222>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p91>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
new file mode 100644
index 000000000000..d65ad0df6865
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
@@ -0,0 +1,3587 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sar2130p-gcc.h>
+#include <dt-bindings/clock/qcom,sar2130p-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8550-tcsr.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sar2130p-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+
+				l3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			l2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			l2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			l2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			cpu_sleep_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			cluster_sleep_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			cluster_sleep_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41002344>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <4562>;
+				min-residency-us = <8467>;
+			};
+
+			cluster_sleep_2: cluster-sleep-2 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <3638>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9862>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sar2130p", "qcom,scm";
+			qcom,dload-mode = <&tcsr_mutex 0x13000>;
+			interconnects = <&system_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sar2130p-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sar2130p-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>, <&cpu_sleep_1>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>, <&cpu_sleep_1>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>, <&cpu_sleep_1>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>, <&cpu_sleep_1>;
+		};
+
+		cluster_pd: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_0>, <&cluster_sleep_1>, <&cluster_sleep_2>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_dt_log_mem: xbl-dt-log@80600000 {
+			reg = <0x0 0x80600000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@80640000 {
+			reg = <0x0 0x80640000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@80800000 {
+			reg = <0x0 0x80800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config@80880000 {
+			reg = <0x0 0x80880000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: tme-crash-dump@808a0000 {
+			reg = <0x0 0x808a0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log@808e0000 {
+			reg = <0x0 0x808e0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log@808e4000 {
+			reg = <0x0 0x808e4000 0x0 0x10000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss@808ff000 {
+			reg = <0x0 0x808ff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem: smem@80900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		cpucp_fw_mem: cpucp-fw@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		helios_ram_dump_mem: helios-ram-dump@80c00000 {
+			reg = <0x0 0x80c00000 0x0 0xe00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84e00000 {
+			reg = <0x0 0x84e00000 0x0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video@86f00000 {
+			reg = <0x0 0x86f00000 0x0 0x500000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@87600000 {
+			reg = <0x0 0x87600000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@89400000 {
+			reg = <0x0 0x89400000 0x0 0xf00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8a300000 {
+			reg = <0x0 0x8a300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8a3a0000 {
+			reg = <0x0 0x8a310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code@8a31a000 {
+			reg = <0x0 0x8a31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8a400000 {
+			reg = <0x0 0x8a400000 0x0 0x700000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc@a6e00000 {
+			no-map;
+			reg = <0x0 0xa6e00000 0x0 0x40000>;
+		};
+
+		global_sync_mem: global-sync@a6f00000 {
+			no-map;
+			reg = <0x0 0xa6f00000 0x0 0x100000>;
+		};
+
+		tz_stat_mem: tz-stat@e8800000 {
+			no-map;
+			reg = <0x0 0xe8800000 0x0 0x100000>;
+		};
+
+		tags_mem: tags@e8900000 {
+			no-map;
+			reg = <0x0 0xe8900000 0x0 0x500000>;
+		};
+
+		qtee_mem: qtee@e8e00000 {
+			no-map;
+			reg = <0x0 0xe8e00000 0x0 0x500000>;
+		};
+
+		trusted_apps_mem: trusted-apps@e9300000 {
+			no-map;
+			reg = <0x0 0xe9300000 0x0 0xc00000>;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sar2130p-gcc";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,sar2130p-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x007c4000 0x0 0x1000>,
+			      <0x0 0x007c5000 0x0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			iommus = <&apps_smmu 0x160 0x0>;
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			interconnects = <&system_noc MASTER_SDCC_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_SDCC_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			bus-width = <8>;
+			non-removable;
+			supports-cqe;
+
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 200000>;
+					opp-avg-kBps = <104000 0>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <2500000 1000000>;
+					opp-avg-kBps = <400000 0>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@900000 {
+			compatible = "qcom,sar2130p-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x00900000 0x0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <3>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7e>;
+			iommus = <&apps_smmu 0x76 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x63 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs0>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs0>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs0>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00994000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00994000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sar2130p-gpi-dma", "qcom,sm6350-gpi-dma";
+			#dma-cells = <3>;
+			reg = <0x0 0x00a00000 0x0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7e>;
+			iommus = <&apps_smmu 0x16 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c6: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi6: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi7: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart7: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-0 = <&qup_uart7_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+
+				status = "disabled";
+			};
+
+			i2c8: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi8: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi9: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi10: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi11: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart11: serial@a94000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-0 = <&qup_uart11_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sar2130p-config-noc";
+			reg = <0x0 0x01500000 0x0 0x10>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sar2130p-system-noc";
+			reg = <0x0 0x01680000 0x0 0x29080>;
+			clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sar2130p-pcie-anoc";
+			reg = <0x0 0x016c0000 0x0 0xa080>;
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sar2130p-mmss-noc";
+			reg = <0x0 0x01740000 0x0 0x1f100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie0: pcie@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,sar2130p-pcie", "qcom,pcie-sm8550";
+			reg = <0x0 0x01c00000 0x0 0x3000>,
+			      <0x0 0x60000000 0x0 0xf1d>,
+			      <0x0 0x60000f20 0x0 0xa8>,
+			      <0x0 0x60001000 0x0 0x1000>,
+			      <0x0 0x60100000 0x0 0x100000>,
+			      <0x0 0x01c0c000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <0>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr";
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+
+			pcieport0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sar2130p-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x01c06000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_0_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie1: pcie@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,sar2130p-pcie", "qcom,pcie-sm8550";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40100000 0x0 0x100000>,
+			      <0x0 0x01c0b000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <1>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>,
+				 <&gcc GCC_QMIP_PCIE_AHB_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi",
+				      "qmip_pcie_ahb";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
+				    <0x100 &apps_smmu 0x1e01 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>,
+				<&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+			reset-names = "pci", "link_down";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie1_ep: pcie-ep@1c08000 {
+			compatible = "qcom,sar2130p-pcie-ep";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40200000 0x0 0x1000000>,
+			      <0x0 0x01c0b000 0x0 0x1000>,
+			      <0x0 0x40002000 0x0 0x2000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "addr_space",
+				    "mmio",
+				    "dma";
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>,
+				 <&gcc GCC_QMIP_PCIE_AHB_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "aggre_noc_axi",
+				      "cnoc_sf_axi",
+				      "qmip_pcie_ahb";
+
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global",
+					  "doorbell",
+					  "dma";
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+			iommus = <&apps_smmu 0x1e00 0x1>;
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_1_GDSC>;
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sar2130p-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x01c0e000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_1_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: clock-controller@1fc0000 {
+			compatible = "qcom,sar2130p-tcsr", "syscon";
+			reg = <0x0 0x01fc0000 0x0 0x30000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		remoteproc_adsp: remoteproc@3000000 {
+			compatible = "qcom,sar2130p-adsp-pas";
+			reg = <0x0 0x03000000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1801 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1806 0x0>;
+					};
+				};
+			};
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-621.0", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x2000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x401>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-843000000 {
+					opp-hz = /bits/ 64 <843000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-780000000 {
+					opp-hz = /bits/ 64 <780000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-644000000 {
+					opp-hz = /bits/ 64 <644000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-570000000 {
+					opp-hz = /bits/ 64 <570000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-235000000 {
+					opp-hz = /bits/ 64 <235000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					opp-supported-hw = <0x3>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-621.0", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03de0000 0x0 0x10000>,
+			      <0x0 0x0b290000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sar2130p-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sar2130p-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sar2130p-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0x0 0x088e3000 0x0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sar2130p-qmp-usb3-dp-phy";
+			reg = <0x0 0x088e8000 0x0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			power-domains = <&gcc USB3_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			orientation-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sar2130p-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&tcsr TCSR_USB3_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x20 0x0>;
+				phys = <&usb_1_hsphy>,
+				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,is-utmi-l1-suspend;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,parkmode-disable-ss-quirk;
+
+				tx-fifo-resize;
+				dma-coherent;
+				usb-role-switch;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+						};
+					};
+				};
+			};
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sar2130p-mdss";
+			reg = <0x0 0x0ae00000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem", "cpu-cfg";
+
+			iommus = <&apps_smmu 0x2000 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sar2130p-dpu";
+				reg = <0x0 0x0ae01000 0x0 0x8f000>,
+				      <0x0 0x0aeb0000 0x0 0x3000>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-514000000 {
+						opp-hz = /bits/ 64 <514000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sar2130p-dp",
+					     "qcom,sm8350-dp";
+				reg = <0x0 0xae90000 0x0 0x200>,
+				      <0x0 0xae90200 0x0 0x200>,
+				      <0x0 0xae90400 0x0 0xc00>,
+				      <0x0 0xae91000 0x0 0x400>,
+				      <0x0 0xae91400 0x0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sar2130p-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae95000 {
+				compatible = "qcom,sar2130p-dsi-phy-5nm";
+				reg = <0x0 0x0ae95000 0x0 0x200>,
+				      <0x0 0x0ae95200 0x0 0x280>,
+				      <0x0 0x0ae95500 0x0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sar2130p-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae96000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae97000 {
+				compatible = "qcom,sar2130p-dsi-phy-5nm";
+				reg = <0x0 0x0ae97000 0x0 0x200>,
+				      <0x0 0x0ae97200 0x0 0x280>,
+				      <0x0 0x0ae97500 0x0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sar2130p-dispcc";
+			reg = <0x0 0x0af00000 0x0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sar2130p-pdc", "qcom,pdc";
+			reg = <0x0 0x0b220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
+			qcom,pdc-ranges = <0 480 94>,
+					  <94 609 31>,
+					  <125 63 1>,
+					  <126 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sar2130p-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sar2130p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c263000 0x0 0x1000>, /* TM */
+			      <0x0 0x0c222000 0x0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
+		arbiter@c400000 {
+			compatible = "qcom,sar2130p-spmi-pmic-arb",
+				     "qcom,x1e80100-spmi-pmic-arb";
+			reg = <0x0 0x0c400000 0x0 0x3000>,
+			      <0x0 0x0c500000 0x0 0x400000>,
+			      <0x0 0x0c440000 0x0 0x80000>;
+			reg-names = "core", "chnls", "obsrvr";
+
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			spmi_bus: spmi@c42d000 {
+				reg = <0x0 0x0c42d000 0x0 0x4000>,
+				      <0x0 0x0c4c0000 0x0 0x10000>;
+				reg-names = "cnfg", "intr";
+
+				interrupt-names = "periph_irq";
+				interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <4>;
+
+				#address-cells = <2>;
+				#size-cells = <0>;
+			};
+		};
+
+		ipcc: mailbox@ed18000 {
+			compatible = "qcom,sar2130p-ipcc", "qcom,ipcc";
+			reg = <0x0 0x0ed18000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sar2130p-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 156>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio2", "gpio3";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio22", "gpio23";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio95", "gpio96";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio91", "gpio92";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio109", "gpio110";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio28", "gpio30";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_cs0: qup-spi0-cs0-state {
+				pins = "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi0_cs1: qup-spi0-cs1-state {
+				pins = "gpio93";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio62";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio2", "gpio3", "gpio61";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio13";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio22", "gpio23", "gpio12";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi3_cs0: qup-spi3-cs0-state {
+				pins = "gpio19";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi3_cs1: qup-spi3-cs1-state {
+				pins = "gpio41";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi4_cs0: qup-spi4-cs0-state {
+				pins = "gpio23";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi4_cs1: qup-spi4-cs1-state {
+				pins = "gpio94";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio98";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio95", "gpio96", "gpio97";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio63";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio91", "gpio92", "gpio64";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio27";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio11";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio35";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio109", "gpio110", "gpio34";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio7";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio15";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio28", "gpio30", "gpio14";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_default: qup-uart7-default-state {
+				cts-pins {
+					pins = "gpio24";
+					function = "qup7";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rts-pins {
+					pins = "gpio25";
+					function = "qup7";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				rx-pins {
+					pins = "gpio27";
+					function = "qup7";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				tx-pins {
+					pins = "gpio26";
+					function = "qup7";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_uart11_default: qup-uart11-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sar2130p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+		};
+
+		intc: interrupt-controller@17200000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			reg = <0x0 0x17200000 0x0 0x10000>,
+			      <0x0 0x17260000 0x0 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17240000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x17240000 0x0 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  3>, <SLEEP_TCS   2>,
+					  <WAKE_TCS    2>, <CONTROL_TCS 0>;
+			power-domains = <&cluster_pd>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sar2130p-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sar2130p-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_turbo: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sar2130p-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0x0 0x17d91000 0x0 0x1000>;
+			reg-names = "freq-domain0";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,sar2130p-gem-noc";
+			reg = <0x0 0x19100000 0x0 0xa2080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		/*
+		 * Bootloader expects just cache-controller node instead of
+		 * the typical system-cache-controller
+		 */
+		llcc: cache-controller@19200000 {
+			compatible = "qcom,sar2130p-llcc";
+			reg = <0x0 0x19200000 0x0 0x80000>,
+			      <0x0 0x19300000 0x0 0x80000>,
+			      <0x0 0x19a00000 0x0 0x80000>,
+			      <0x0 0x19c00000 0x0 0x80000>,
+			      <0x0 0x19af0000 0x0 0x80000>,
+			      <0x0 0x19cf0000 0x0 0x80000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc_broadcast_base",
+				    "llcc_broadcast_and_base",
+				    "llcc_scratchpad_broadcast_base",
+				    "llcc_scratchpad_broadcast_and_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		qfprom: qfprom@221c8000 {
+			compatible = "qcom,sar2130p-qfprom", "qcom,qfprom";
+			reg = <0x0 0x221c8000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			read-only;
+
+			gpu_speed_bin: gpu-speed-bin@119 {
+				reg = <0x119 0x2>;
+				bits = <5 8>;
+			};
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sar2130p-nsp-noc";
+			reg = <0x0 0x320c0000 0x0 0x10>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,sar2130p-lpass-ag-noc";
+			reg = <0x0 0x3c40000 0x0 0x10>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				aoss0-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+			};
+		};
+
+		cpu0-thermal {
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <110000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cpu0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <110000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cpu1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <110000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cpu2-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <110000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: rip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cpu3-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu0_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nspss0-thermal {
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				nspss1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nspss1-thermal {
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				nspss2-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nspss2-thermal {
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				nspss2-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				video-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				ddr-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera0-thermal {
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				camera0-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera1-thermal {
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				camera1-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdmss-thermal {
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				mdmss-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
index dbb48934d499..ad342d8b7508 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "sc7180.dtsi"
@@ -129,6 +130,113 @@
 		pinctrl-names = "default";
 	};
 
+	sound: sound {
+		compatible = "qcom,sc7180-qdsp6-sndcard";
+		pinctrl-0 = <&pri_mi2s_active>, <&pri_mi2s_mclk_active>, <&ter_mi2s_active>;
+		pinctrl-names = "default";
+		model = "Acer-Aspire-1";
+
+		audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		multimedia1-dai-link {
+			link-name = "MultiMedia1";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+			};
+		};
+
+		multimedia2-dai-link {
+			link-name = "MultiMedia2";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+			};
+		};
+
+		multimedia3-dai-link {
+			link-name = "MultiMedia3";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+			};
+		};
+
+		multimedia4-dai-link {
+			link-name = "MultiMedia4";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+			};
+		};
+
+		primary-rx-dai-link {
+			link-name = "Primary MI2S Playback";
+
+			cpu {
+				sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0>;
+			};
+		};
+
+		primary-tx-dai-link {
+			link-name = "Primary MI2S Capture";
+
+			cpu {
+				sound-dai = <&q6afedai PRIMARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0>;
+			};
+		};
+
+		tertiary-rx-dai-link {
+			link-name = "Tertiary MI2S Playback";
+
+			cpu {
+				sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+		};
+
+		displayport-rx-dai-link {
+			link-name = "DisplayPort Playback";
+
+			cpu {
+				sound-dai = <&q6afedai DISPLAY_PORT_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+	};
+
 	reg_tp_3p3: touchpad-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "tp_3p3";
@@ -147,7 +255,25 @@
 	clock-frequency = <400000>;
 	status = "okay";
 
-	/* embedded-controller@76 */
+	embedded-controller@76 {
+		compatible = "acer,aspire1-ec";
+		reg = <0x76>;
+
+		interrupts-extended = <&tlmm 30 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ec_int_default>;
+		pinctrl-names = "default";
+
+		connector {
+			compatible = "usb-c-connector";
+
+			port {
+				ec_dp_in: endpoint {
+					remote-endpoint = <&mdss_dp_out>;
+				};
+			};
+		};
+	};
 };
 
 &i2c4 {
@@ -209,9 +335,22 @@
 		AVDD-supply = <&vreg_l15a_1p8>;
 		MICVDD-supply = <&reg_codec_3p3>;
 		VBAT-supply = <&reg_codec_3p3>;
+		DBVDD-supply = <&vreg_l15a_1p8>;
+		LDO1-IN-supply = <&vreg_l15a_1p8>;
+
+		/*
+		 * NOTE: The board has a path from this codec to the
+		 * DMIC microphones in the lid, however some of the option
+		 * resistors are absent and the microphones are connected
+		 * to the SoC instead.
+		 *
+		 * If the resistors were to be changed by the user to
+		 * connect the codec, the following could be used:
+		 *
+		 * realtek,dmic1-data-pin = <1>;
+		 * realtek,dmic1-clk-pin = <1>;
+		 */
 
-		realtek,dmic1-data-pin = <1>;
-		realtek,dmic1-clk-pin = <1>;
 		realtek,jd-src = <1>;
 	};
 };
@@ -298,6 +437,15 @@
 	status = "okay";
 };
 
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&ec_dp_in>;
+};
+
 &mdss_dsi0 {
 	vdda-supply = <&vreg_l3c_1p2>;
 	status = "okay";
@@ -351,6 +499,49 @@
 	status = "disabled";
 };
 
+&pm6150_rtc {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+
+	dai@17 {
+		reg = <PRIMARY_MI2S_TX>;
+		qcom,sd-lines = <0>;
+	};
+
+	dai@20 {
+		reg = <TERTIARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+
+	dai@104 {
+		reg = <DISPLAY_PORT_RX>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+	};
+
+	dai@1 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
+	};
+
+	dai@2 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+	};
+
+	dai@3 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -359,6 +550,12 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	memory-region = <&adsp_mem>;
+	firmware-name = "qcom/sc7180/acer/aspire1/qcadsp7180.mbn";
+	status = "okay";
+};
+
 &remoteproc_mpss {
 	firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn";
 	status = "okay";
@@ -687,6 +884,13 @@
 		bias-disable;
 	};
 
+	ec_int_default: ec-int-default-state {
+		pins = "gpio30";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	edp_bridge_irq_default: edp-bridge-irq-default-state {
 		pins = "gpio11";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-el2.dtso b/arch/arm64/boot/dts/qcom/sc7180-el2.dtso
new file mode 100644
index 000000000000..49a98676ca4d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-el2.dtso
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * sc7180 specific modifications required to boot in EL2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */
+&gpu {
+	zap-shader {
+		status = "disabled";
+	};
+};
+
+/* Venus can be used in EL2 if booted similarly to ChromeOS devices. */
+&venus {
+	video-firmware {
+		iommus = <&apps_smmu 0x0c42 0x0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi b/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
index ee35a454dbf6..59162b3afcb8 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
@@ -6,82 +6,82 @@
  * by Qualcomm firmware.
  */
 
-&CPU0 {
+&cpu0 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU1 {
+&cpu1 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU2 {
+&cpu2 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU3 {
+&cpu3 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU4 {
+&cpu4 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU5 {
+&cpu5 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU6 {
+&cpu6 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&BIG_CPU_SLEEP_0
-			   &BIG_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&big_cpu_sleep_0
+			   &big_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU7 {
+&cpu7 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&BIG_CPU_SLEEP_0
-			   &BIG_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&big_cpu_sleep_0
+			   &big_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
 /delete-node/ &domain_idle_states;
 
 &idle_states {
-	CLUSTER_SLEEP_0: cluster-sleep-0 {
+	cluster_sleep_0: cluster-sleep-0 {
 		compatible = "arm,idle-state";
 		idle-state-name = "cluster-power-down";
 		arm,psci-suspend-param = <0x40003444>;
@@ -92,15 +92,15 @@
 	};
 };
 
-/delete-node/ &CPU_PD0;
-/delete-node/ &CPU_PD1;
-/delete-node/ &CPU_PD2;
-/delete-node/ &CPU_PD3;
-/delete-node/ &CPU_PD4;
-/delete-node/ &CPU_PD5;
-/delete-node/ &CPU_PD6;
-/delete-node/ &CPU_PD7;
-/delete-node/ &CLUSTER_PD;
+/delete-node/ &cpu_pd0;
+/delete-node/ &cpu_pd1;
+/delete-node/ &cpu_pd2;
+/delete-node/ &cpu_pd3;
+/delete-node/ &cpu_pd4;
+/delete-node/ &cpu_pd5;
+/delete-node/ &cpu_pd6;
+/delete-node/ &cpu_pd7;
+/delete-node/ &cluster_pd;
 
 &apps_rsc {
 	/delete-property/ power-domains;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 0146fb0036d4..19cf419cf531 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -323,15 +323,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&panel0_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-clamshell.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-clamshell.dtsi
new file mode 100644
index 000000000000..d91533b80e76
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-clamshell.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for clamshells
+ *
+ * Copyright 2024 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi to modify cros_ec */
+#include <arm/cros-ec-keyboard.dtsi>
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index 7765c8f64905..25b17b0425f2 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -7,6 +7,7 @@
 
 #include "sc7180-trogdor.dtsi"
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-detachable.dtsi"
 
 /* Deleted nodes from sc7180-trogdor.dtsi */
 
@@ -25,7 +26,6 @@
 	thermal-zones {
 		skin_temp_thermal: skin-temp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm6150_adc_tm 1>;
 			sustainable-power = <965>;
@@ -53,14 +53,14 @@
 			cooling-maps {
 				map0 {
 					trip = <&skin_temp_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 
 				map1 {
 					trip = <&skin_temp_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -80,10 +80,6 @@
 };
 
 &cros_ec {
-	keyboard-controller {
-		compatible = "google,cros-ec-keyb-switches";
-	};
-
 	cros_ec_proximity: proximity {
 		compatible = "google,cros-ec-mkbp-proximity";
 		label = "proximity-wifi";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-detachable.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-detachable.dtsi
new file mode 100644
index 000000000000..7c5d8a57ef7f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-detachable.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for detachables
+ *
+ * Copyright 2024 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi to modify cros_ec */
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index 2ba3bbf3b9ad..8fee8d7a7d4c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -5,9 +5,8 @@
  * Copyright 2021 Google LLC.
  */
 
-/* This file must be included after sc7180-trogdor.dtsi */
-
 #include "sc7180-trogdor-rt5682i-sku.dtsi"
+#include "sc7180-trogdor-detachable.dtsi"
 
 / {
 	/* BOARD-SPECIFIC TOP LEVEL NODES */
@@ -45,7 +44,6 @@
 	thermal-zones {
 		skin_temp_thermal: skin-temp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm6150_adc_tm 1>;
 			sustainable-power = <965>;
@@ -73,14 +71,14 @@
 			cooling-maps {
 				map0 {
 					trip = <&skin_temp_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 
 				map1 {
 					trip = <&skin_temp_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -135,12 +133,6 @@ ap_ts_pen_1v8: &i2c4 {
 	status = "okay";
 };
 
-&cros_ec {
-	keyboard-controller {
-		compatible = "google,cros-ec-keyb-switches";
-	};
-};
-
 &panel {
 	compatible = "samsung,atna33xc20";
 	enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
@@ -196,7 +188,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_HOMESTAR";
+	qcom,calibration-variant = "GO_HOMESTAR";
 };
 
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
index d6db7d83adcf..26514640a1ae 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
@@ -9,7 +9,7 @@
 
 #include "sc7180-trogdor.dtsi"
 #include "sc7180-trogdor-parade-ps8640.dtsi"
-#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-clamshell.dtsi"
 #include "sc7180-trogdor-lte-sku.dtsi"
 #include "sc7180-trogdor-rt5682s-sku.dtsi"
 
@@ -79,7 +79,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_KINGOFTOWN";
+	qcom,calibration-variant = "GO_KINGOFTOWN";
 };
 
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts
index 919bfaea6189..340cb119d0a0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts
@@ -12,6 +12,6 @@
 	compatible = "google,lazor-rev1-sku2", "google,lazor-rev2-sku2", "qcom,sc7180";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
index eb20157f6af9..d45e60e3eb9e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
@@ -17,6 +17,6 @@
 	status = "okay";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts
index 45d34718a1bc..e906ce877b8c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts
@@ -18,6 +18,6 @@
 	compatible = "google,lazor-sku2", "qcom,sc7180";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts
index 79028d0dd1b0..4b9ee15b09f6 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts
@@ -22,6 +22,6 @@
 	status = "okay";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
index 3459b81c5628..a960553f3994 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
@@ -21,6 +21,6 @@
 		"qcom,sc7180";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
index ff8f47da109d..82bd9ed7e21a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
@@ -25,6 +25,6 @@
 	status = "okay";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
index faf527972977..6278c1715d3f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
@@ -18,6 +18,6 @@
 	compatible = "google,lazor-rev9-sku2", "qcom,sc7180";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
index d737fd0637fb..0ec1697ae2c9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
@@ -22,6 +22,6 @@
 	status = "okay";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index e9f213d27711..eb9c9e713a89 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -5,8 +5,7 @@
  * Copyright 2020 Google LLC.
  */
 
-/* This file must be included after sc7180-trogdor.dtsi */
-#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-clamshell.dtsi"
 
 &ap_sar_sensor {
 	semtech,cs0-ground;
@@ -70,7 +69,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_LAZOR";
+	qcom,calibration-variant = "GO_LAZOR";
 };
 
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
index 8823edbb4d6e..cc2c5610a279 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
@@ -5,8 +5,7 @@
  * Copyright 2021 Google LLC.
  */
 
-/* This file must be included after sc7180-trogdor.dtsi */
-#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-clamshell.dtsi"
 
 &ap_sar_sensor {
 	compatible = "semtech,sx9324";
@@ -83,6 +82,8 @@
 	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
 };
 
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
 &en_pp3300_dx_edp {
 	pins = "gpio67";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
index 89034b6702f4..a2224de841b1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
@@ -59,5 +59,5 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_PAZQUEL360";
+	qcom,calibration-variant = "GO_PAZQUEL360";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index 0be62331f982..4f5ab378cf8e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -6,21 +6,17 @@
  */
 
 #include "sc7180-trogdor.dtsi"
-/* Must come after sc7180-trogdor.dtsi to modify cros_ec */
-#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-clamshell.dtsi"
 #include "sc7180-trogdor-rt5682i-sku.dtsi"
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 
 / {
 	thermal-zones {
-		5v-choke-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <250>;
-
+		choke-5v-thermal {
 			thermal-sensors = <&pm6150_adc_tm 1>;
 
 			trips {
-				5v-choke-crit {
+				choke-5v-crit {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -141,7 +137,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &panel {
-	compatible = "kingdisplay,kd116n21-30nv-a010";
+	compatible = "edp-panel";
 };
 
 &pen_insert {
@@ -185,7 +181,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_POMPOM";
+	qcom,calibration-variant = "GO_POMPOM";
 };
 
 /* PINCTRL - board-specific pinctrl */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
index 5f06842c683b..4bea97e4246e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -9,9 +9,7 @@
 
 #include "sc7180-trogdor.dtsi"
 #include "sc7180-trogdor-rt5682i-sku.dtsi"
-
-/* This board only has 1 USB Type-C port. */
-/delete-node/ &usb_c1;
+#include "sc7180-trogdor-detachable.dtsi"
 
 / {
 	ppvar_lcd: ppvar-lcd-regulator {
@@ -47,12 +45,6 @@
 	status = "okay";
 };
 
-&cros_ec {
-	keyboard-controller {
-		compatible = "google,cros-ec-keyb-switches";
-	};
-};
-
 &gpio_keys {
 	status = "okay";
 };
@@ -86,6 +78,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_rst>;
 		avdd-supply = <&ppvar_lcd>;
+		avee-supply = <&ppvar_lcd>;
 		pp1800-supply = <&v1p8_disp>;
 		pp3300-supply = <&pp3300_dx_edp>;
 		backlight = <&backlight>;
@@ -97,15 +90,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&panel_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
 };
 
 &sdhc_2 {
@@ -136,6 +125,11 @@ pp3300_disp_on: &pp3300_dx_edp {
 	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
 };
 
+/* This board only has 1 USB Type-C port. */
+&usb_c1 {
+	status = "disabled";
+};
+
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 /*
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index c9667751a990..d393a2712ce6 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -8,8 +8,7 @@
 /dts-v1/;
 
 #include "sc7180-trogdor.dtsi"
-/* Must come after sc7180-trogdor.dtsi to modify cros_ec */
-#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-clamshell.dtsi"
 #include "sc7180-trogdor-rt5682i-sku.dtsi"
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
index 305ad127246e..6078308694ac 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-detachable.dtsi"
 
 / {
 	avdd_lcd: avdd-lcd-regulator {
@@ -50,7 +51,6 @@
 	thermal-zones {
 		skin_temp_thermal: skin-temp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm6150_adc_tm 1>;
 			sustainable-power = <574>;
@@ -78,14 +78,14 @@
 			cooling-maps {
 				map0 {
 					trip = <&skin_temp_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 
 				map1 {
 					trip = <&skin_temp_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -104,10 +104,6 @@
 	base_detection: cbas {
 		compatible = "google,cros-cbas";
 	};
-
-	keyboard-controller {
-		compatible = "google,cros-ec-keyb-switches";
-	};
 };
 
 &i2c4 {
@@ -152,15 +148,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&panel_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
 };
 
 &pm6150_adc {
@@ -200,7 +192,7 @@
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_WORMDINGLER";
+	qcom,calibration-variant = "GO_WORMDINGLER";
 };
 
 /*
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 46aaeba28604..74ab321d3333 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -21,9 +21,6 @@
 / {
 	thermal-zones {
 		charger_thermal: charger-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm6150_adc_tm 0>;
 
 			trips {
@@ -359,10 +356,11 @@
 		#sound-dai-cells = <0>;
 	};
 
-	pwmleds {
+	pwmleds: pwmleds {
 		compatible = "pwm-leds";
+		status = "disabled";
+
 		keyboard_backlight: led-0 {
-			status = "disabled";
 			label = "cros_ec::kbd_backlight";
 			function = LED_FUNCTION_KBD_BACKLIGHT;
 			pwms = <&cros_ec_pwm 0>;
@@ -649,6 +647,7 @@ ap_ec_spi: &spi6 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ap_ec_int_l>;
 		spi-max-frequency = <3000000>;
+		wakeup-source;
 
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
@@ -943,6 +942,8 @@ ap_spi_fp: &spi10 {
 		vddrf-supply = <&pp1300_l2c>;
 		vddch0-supply = <&pp3300_l10c>;
 		max-speed = <3200000>;
+
+		qcom,local-bd-address-broken;
 	};
 };
 
@@ -1164,6 +1165,7 @@ ap_spi_fp: &spi10 {
 };
 
 &pm6150l_gpios {
+	status = "disabled"; /* No GPIOs are consumed or configured */
 	gpio-line-names = "AP_SUSPEND",
 			  "",
 			  "",
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 11f353d416b4..a0df10a97c7f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -6,6 +6,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sc7180.h>
 #include <dt-bindings/clock/qcom,gpucc-sc7180.h>
 #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
@@ -77,28 +78,28 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -106,206 +107,206 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_100>;
+			next-level-cache = <&l2_100>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_200>;
+			next-level-cache = <&l2_200>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x300>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_300>;
+			next-level-cache = <&l2_300>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x400>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_400>;
+			next-level-cache = <&l2_400>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x500>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_500>;
+			next-level-cache = <&l2_500>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x600>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <480>;
-			next-level-cache = <&L2_600>;
+			next-level-cache = <&l2_600>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x700>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <480>;
-			next-level-cache = <&L2_700>;
+			next-level-cache = <&l2_700>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -313,7 +314,7 @@
 		idle_states: idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-power-down";
 				arm,psci-suspend-param = <0x40000003>;
@@ -323,7 +324,7 @@
 				local-timer-stop;
 			};
 
-			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+			little_cpu_sleep_1: cpu-sleep-0-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-rail-power-down";
 				arm,psci-suspend-param = <0x40000004>;
@@ -333,7 +334,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-power-down";
 				arm,psci-suspend-param = <0x40000003>;
@@ -343,7 +344,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+			big_cpu_sleep_1: cpu-sleep-1-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-rail-power-down";
 				arm,psci-suspend-param = <0x40000004>;
@@ -355,27 +356,24 @@
 		};
 
 		domain_idle_states: domain-idle-states {
-			CLUSTER_SLEEP_PC: cluster-sleep-0 {
+			cluster_sleep_pc: cluster-sleep-0 {
 				compatible = "domain-idle-state";
-				idle-state-name = "cluster-l3-power-collapse";
 				arm,psci-suspend-param = <0x41000044>;
 				entry-latency-us = <2752>;
 				exit-latency-us = <3048>;
 				min-residency-us = <6118>;
 			};
 
-			CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
+			cluster_sleep_cx_ret: cluster-sleep-1 {
 				compatible = "domain-idle-state";
-				idle-state-name = "cluster-cx-retention";
 				arm,psci-suspend-param = <0x41001244>;
 				entry-latency-us = <3638>;
 				exit-latency-us = <4562>;
 				min-residency-us = <8467>;
 			};
 
-			CLUSTER_AOSS_SLEEP: cluster-sleep-2 {
+			cluster_aoss_sleep: cluster-sleep-2 {
 				compatible = "domain-idle-state";
-				idle-state-name = "cluster-power-down";
 				arm,psci-suspend-param = <0x4100b244>;
 				entry-latency-us = <3263>;
 				exit-latency-us = <6562>;
@@ -583,59 +581,59 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD1: cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD2: cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD3: cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD4: cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD5: cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD6: cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CPU_PD7: cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CLUSTER_PD: cpu-cluster0 {
+		cluster_pd: power-domain-cluster {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_PC
-					      &CLUSTER_SLEEP_CX_RET
-					      &CLUSTER_AOSS_SLEEP>;
+			domain-idle-states = <&cluster_sleep_pc
+					      &cluster_sleep_cx_ret
+					      &cluster_aoss_sleep>;
 		};
 	};
 
@@ -817,7 +815,7 @@
 				bits = <1 3>;
 			};
 
-			gpu_speed_bin: gpu_speed_bin@1d2 {
+			gpu_speed_bin: gpu-speed-bin@1d2 {
 				reg = <0x1d2 0x2>;
 				bits = <5 8>;
 			};
@@ -1532,6 +1530,78 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sc7180-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <1>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0xa0 0x0>;
+
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk";
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>;
+			freq-table-hz = <50000000 200000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 150000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			qcom,ice = <&ice>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sc7180-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_CLK>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		ice: crypto@1d90000 {
+			compatible = "qcom,sc7180-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d90000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sc7180-ipa";
 
@@ -2239,6 +2309,7 @@
 			compatible = "qcom,sc7180-dcc", "qcom,dcc";
 			reg = <0x0 0x010a2000 0x0 0x1000>,
 			      <0x0 0x010ae000 0x0 0x2000>;
+			status = "disabled";
 		};
 
 		stm@6002000 {
@@ -2473,7 +2544,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07040000 0 0x1000>;
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2493,7 +2564,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07140000 0 0x1000>;
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2513,7 +2584,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07240000 0 0x1000>;
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2533,7 +2604,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07340000 0 0x1000>;
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2553,7 +2624,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07440000 0 0x1000>;
 
-			cpu = <&CPU4>;
+			cpu = <&cpu4>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2573,7 +2644,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07540000 0 0x1000>;
 
-			cpu = <&CPU5>;
+			cpu = <&cpu5>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2593,7 +2664,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07640000 0 0x1000>;
 
-			cpu = <&CPU6>;
+			cpu = <&cpu6>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2613,7 +2684,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07740000 0 0x1000>;
 
-			cpu = <&CPU7>;
+			cpu = <&cpu7>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2826,6 +2897,31 @@
 
 			#clock-cells = <1>;
 			#phy-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint { };
+				};
+			};
 		};
 
 		pmu@90b6300 {
@@ -2964,12 +3060,16 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 9 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			required-opps = <&rpmhpd_opp_nom>;
@@ -2989,9 +3089,32 @@
 				iommus = <&apps_smmu 0x540 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
+					};
+				};
 			};
 		};
 
@@ -3017,14 +3140,6 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
 			interconnect-names = "video-mem", "cpu-cfg";
 
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
-
 			venus_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -3100,8 +3215,12 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x800 0x2>;
 
@@ -3114,7 +3233,7 @@
 			mdp: display-controller@ae01000 {
 				compatible = "qcom,sc7180-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -3203,8 +3322,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC7180_CX>;
@@ -3308,8 +3429,10 @@
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
+
 					port@0 {
 						reg = <0>;
+
 						dp_in: endpoint {
 							remote-endpoint = <&dpu_intf0_out>;
 						};
@@ -3317,6 +3440,7 @@
 
 					port@1 {
 						reg = <1>;
+
 						mdss_dp_out: endpoint { };
 					};
 				};
@@ -3352,8 +3476,8 @@
 			reg = <0 0x0af00000 0 0x200000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -3442,18 +3566,18 @@
 			#interrupt-cells = <4>;
 		};
 
-		sram@146aa000 {
+		sram@14680000 {
 			compatible = "qcom,sc7180-imem", "syscon", "simple-mfd";
-			reg = <0 0x146aa000 0 0x2000>;
+			reg = <0 0x14680000 0 0x2e000>;
 
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			ranges = <0 0 0x146aa000 0x2000>;
+			ranges = <0 0 0x14680000 0x2e000>;
 
-			pil-reloc@94c {
+			pil-reloc@2a94c {
 				compatible = "qcom,pil-reloc-info";
-				reg = <0x94c 0xc8>;
+				reg = <0x2a94c 0xc8>;
 			};
 		};
 
@@ -3543,6 +3667,7 @@
 				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 		};
 
 		intc: interrupt-controller@17a00000 {
@@ -3576,7 +3701,7 @@
 			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
@@ -3638,7 +3763,7 @@
 		};
 
 		apps_rsc: rsc@18200000 {
-			compatible = "qcom,rpmh-rsc";
+			compatible = "qcom,sc7180-rpmh-apps-rsc", "qcom,rpmh-rsc";
 			reg = <0 0x18200000 0 0x10000>,
 			      <0 0x18210000 0 0x10000>,
 			      <0 0x18220000 0 0x10000>;
@@ -3652,7 +3777,7 @@
 					  <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>,
 					  <CONTROL_TCS 1>;
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sc7180-rpmh-clk";
@@ -3954,7 +4079,6 @@
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 1>;
 			sustainable-power = <1052>;
@@ -3982,28 +4106,27 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu0_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu0_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu1_thermal: cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 2>;
 			sustainable-power = <1052>;
@@ -4031,28 +4154,27 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu1_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu1_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu2_thermal: cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 3>;
 			sustainable-power = <1052>;
@@ -4080,28 +4202,27 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu2_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu2_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu3_thermal: cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 4>;
 			sustainable-power = <1052>;
@@ -4129,28 +4250,27 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu3_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu3_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu4_thermal: cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 5>;
 			sustainable-power = <1052>;
@@ -4178,28 +4298,27 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu4_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu4_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu5_thermal: cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 6>;
 			sustainable-power = <1052>;
@@ -4227,28 +4346,27 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu5_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu5_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu6_thermal: cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 9>;
 			sustainable-power = <1425>;
@@ -4276,20 +4394,19 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu6_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu6_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu7_thermal: cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 10>;
 			sustainable-power = <1425>;
@@ -4317,20 +4434,19 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu7_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu7_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu8_thermal: cpu8-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 11>;
 			sustainable-power = <1425>;
@@ -4358,20 +4474,19 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu8_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu8_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu9_thermal: cpu9-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 12>;
 			sustainable-power = <1425>;
@@ -4399,20 +4514,19 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu9_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu9_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -4433,7 +4547,6 @@
 
 		cpuss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -4453,7 +4566,6 @@
 
 		cpuss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -4473,7 +4585,6 @@
 
 		gpuss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -4501,7 +4612,6 @@
 
 		gpuss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -4529,7 +4639,6 @@
 
 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -4550,7 +4659,6 @@
 
 		cwlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -4571,7 +4679,6 @@
 
 		audio-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -4592,7 +4699,6 @@
 
 		ddr-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -4613,7 +4719,6 @@
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -4634,7 +4739,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -4655,7 +4759,6 @@
 
 		mdm-core-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -4676,7 +4779,6 @@
 
 		mdm-dsp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -4697,7 +4799,6 @@
 
 		npu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 8>;
 
@@ -4718,7 +4819,6 @@
 
 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 9>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index 5d462ae14ba1..84c6d662b54f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -17,33 +17,42 @@
  * required by the setup for Chrome boards.
  */
 
+/delete-node/ &cdsp_mem;
+/delete-node/ &domain_idle_states;
+/delete-node/ &gpu_zap_mem;
+/delete-node/ &gpu_zap_shader;
 /delete-node/ &hyp_mem;
 /delete-node/ &xbl_mem;
 /delete-node/ &reserved_xbl_uefi_log;
 /delete-node/ &sec_apps_mem;
 
 / {
-	reserved-memory {
-		adsp_mem: memory@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
+	cpus {
+		domain_idle_states: domain-idle-states {
+			cluster_sleep_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x40003444>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9926>;
+			};
 		};
+	};
 
+	reserved-memory {
 		camera_mem: memory@8ad00000 {
 			reg = <0x0 0x8ad00000 0x0 0x500000>;
 			no-map;
 		};
+	};
+};
 
-		venus_mem: memory@8b200000 {
-			reg = <0x0 0x8b200000 0x0 0x500000>;
-			no-map;
-		};
+&cluster_pd {
+	domain-idle-states = <&cluster_sleep_0>;
+};
 
-		wpss_mem: memory@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
-	};
+&gpu {
+	status = "okay";
 };
 
 &lpass_aon {
@@ -94,9 +103,31 @@
 	};
 };
 
+/* Currently not used */
+&remoteproc_cdsp {
+	/delete-property/ memory-region;
+};
+
 &remoteproc_wpss {
-	status = "okay";
+	compatible = "qcom,sc7280-wpss-pil";
+	clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+		 <&gcc GCC_WPSS_AHB_CLK>,
+		 <&gcc GCC_WPSS_RSCP_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "ahb_bdg",
+		      "ahb",
+		      "rscp",
+		      "xo";
+
+	resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+		 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+	reset-names = "restart", "pdc_sync";
+
+	qcom,halt-regs = <&tcsr_1 0x17000>;
+
 	firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
+
+	status = "okay";
 };
 
 &scm {
@@ -104,6 +135,17 @@
 	dma-coherent;
 };
 
+&venus {
+	iommus = <&apps_smmu 0x2180 0x20>,
+		 <&apps_smmu 0x2184 0x20>;
+
+	status = "okay";
+
+	video-firmware {
+		iommus = <&apps_smmu 0x21a2 0x0>;
+	};
+};
+
 &watchdog {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
index a90c70b1b73e..0e07429982bd 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
@@ -139,6 +139,7 @@ hp_i2c: &i2c2 {
 	vdd-micb-supply = <&pp1800_l2c>;
 	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>, <&lpass_dmic23_clk>,
 			<&lpass_dmic23_data>;
+	pinctrl-names = "default";
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
index 020ef666e35f..ce48e4cda170 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -141,6 +141,9 @@
 };
 
 &lpass_va_macro {
+	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
index 95505549adcc..b721a8546800 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -8,11 +8,6 @@
 
 / {
 	reserved-memory {
-		mpss_mem: memory@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
 		mba_mem: memory@9c700000 {
 			reg = <0x0 0x9c700000 0x0 0x200000>;
 			no-map;
@@ -33,6 +28,8 @@
 
 &remoteproc_mpss {
 	compatible = "qcom,sc7280-mss-pil";
+	reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
+	reg-names = "qdsp6", "rmb";
 
 	clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
 		 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
index 2febd6126d4c..3ebc915f0dc2 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
@@ -7,5 +7,6 @@
 
 /* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */
 
+/delete-node/ &mpss_mem;
 /delete-node/ &remoteproc_mpss;
 /delete-node/ &rmtfs_mem;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 9ea6636125ad..5c5e4f1dd221 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -548,6 +548,7 @@ ap_ec_spi: &spi10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ap_ec_int_l>;
 		spi-max-frequency = <3000000>;
+		wakeup-source;
 
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
@@ -620,15 +621,13 @@ ap_ec_spi: &spi10 {
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "host";
 
 	#address-cells = <1>;
 	#size-cells = <0>;
 
+	status = "okay";
+
 	/* 2.x hub on port 1 */
 	usb_hub_2_x: hub@1 {
 		compatible = "usbbda,5411";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
index ebae545c587c..fbfac7534d3c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
@@ -19,6 +19,7 @@ ap_ec_spi: &spi10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ap_ec_int_l>;
 		spi-max-frequency = <3000000>;
+		wakeup-source;
 
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index b5fe7356be48..3103f94cd685 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -81,11 +81,9 @@
 };
 
 &usb_2 {
-	status = "okay";
-};
-
-&usb_2_dwc3 {
 	dr_mode = "otg";
+
+	status = "okay";
 };
 
 &usb_2_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 2ff549f4dc7a..ccd39a1baeda 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -412,6 +412,8 @@
 &lpass_va_macro {
 	status = "okay";
 	vdd-micb-supply = <&vreg_bob>;
+	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
+	pinctrl-names = "default";
 };
 
 &pcie1 {
@@ -495,16 +497,32 @@
 };
 
 &uart5 {
-	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
 
-&usb_1 {
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p9>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p8>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
 	status = "okay";
 };
 
-&usb_1_dwc3 {
+&usb_1 {
 	dr_mode = "host";
+
+	status = "okay";
 };
 
 &usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index f9b96bd2477e..7d1d5bbbbbd9 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -427,7 +427,6 @@
 };
 
 uart_dbg: &uart5 {
-	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 66f1eb83cca7..4b04dea57ec8 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -6,6 +6,7 @@
  */
 #include <dt-bindings/clock/qcom,camcc-sc7280.h>
 #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sc7280.h>
 #include <dt-bindings/clock/qcom,gpucc-sc7280.h>
 #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
@@ -15,6 +16,7 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -23,8 +25,11 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,lpass.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -81,7 +86,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -91,68 +96,93 @@
 		#size-cells = <2>;
 		ranges;
 
-		wlan_ce_mem: memory@4cd000 {
+		wlan_ce_mem: wlan-ce@4cd000 {
 			no-map;
 			reg = <0x0 0x004cd000 0x0 0x1000>;
 		};
 
-		hyp_mem: memory@80000000 {
+		hyp_mem: hyp@80000000 {
 			reg = <0x0 0x80000000 0x0 0x600000>;
 			no-map;
 		};
 
-		xbl_mem: memory@80600000 {
+		xbl_mem: xbl@80600000 {
 			reg = <0x0 0x80600000 0x0 0x200000>;
 			no-map;
 		};
 
-		aop_mem: memory@80800000 {
+		aop_mem: aop@80800000 {
 			reg = <0x0 0x80800000 0x0 0x60000>;
 			no-map;
 		};
 
-		aop_cmd_db_mem: memory@80860000 {
+		aop_cmd_db_mem: aop-cmd-db@80860000 {
 			reg = <0x0 0x80860000 0x0 0x20000>;
 			compatible = "qcom,cmd-db";
 			no-map;
 		};
 
-		reserved_xbl_uefi_log: memory@80880000 {
+		reserved_xbl_uefi_log: xbl-uefi-res@80880000 {
 			reg = <0x0 0x80884000 0x0 0x10000>;
 			no-map;
 		};
 
-		sec_apps_mem: memory@808ff000 {
+		sec_apps_mem: sec-apps@808ff000 {
 			reg = <0x0 0x808ff000 0x0 0x1000>;
 			no-map;
 		};
 
-		smem_mem: memory@80900000 {
+		smem_mem: smem@80900000 {
 			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
 
-		cpucp_mem: memory@80b00000 {
+		cpucp_mem: cpucp@80b00000 {
 			no-map;
 			reg = <0x0 0x80b00000 0x0 0x100000>;
 		};
 
-		wlan_fw_mem: memory@80c00000 {
+		wlan_fw_mem: wlan-fw@80c00000 {
 			reg = <0x0 0x80c00000 0x0 0xc00000>;
 			no-map;
 		};
 
-		video_mem: memory@8b200000 {
+		adsp_mem: adsp@86700000 {
+			reg = <0x0 0x86700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		video_mem: video@8b200000 {
 			reg = <0x0 0x8b200000 0x0 0x500000>;
 			no-map;
 		};
 
-		ipa_fw_mem: memory@8b700000 {
+		cdsp_mem: cdsp@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b700000 {
 			reg = <0 0x8b700000 0 0x10000>;
 			no-map;
 		};
 
-		rmtfs_mem: memory@9c900000 {
+		gpu_zap_mem: zap@8b71a000 {
+			reg = <0 0x8b71a000 0 0x2000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@9c900000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0x9c900000 0x0 0x280000>;
 			no-map;
@@ -166,26 +196,28 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -193,192 +225,206 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_100>;
+			next-level-cache = <&l2_100>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_200>;
+			next-level-cache = <&l2_200>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x300>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_300>;
+			next-level-cache = <&l2_300>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x400>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_400>;
+			next-level-cache = <&l2_400>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <520>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x500>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_500>;
+			next-level-cache = <&l2_500>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <520>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x600>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_600>;
+			next-level-cache = <&l2_600>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <520>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo";
 			reg = <0x0 0x700>;
 			clocks = <&cpufreq_hw 2>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_700>;
+			next-level-cache = <&l2_700>;
 			operating-points-v2 = <&cpu7_opp_table>;
+			capacity-dmips-mhz = <1985>;
+			dynamic-power-coefficient = <552>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 2>;
 			#cooling-cells = <2>;
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -386,7 +432,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-power-down";
 				arm,psci-suspend-param = <0x40000003>;
@@ -396,7 +442,7 @@
 				local-timer-stop;
 			};
 
-			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+			little_cpu_sleep_1: cpu-sleep-0-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-rail-power-down";
 				arm,psci-suspend-param = <0x40000004>;
@@ -406,7 +452,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-power-down";
 				arm,psci-suspend-param = <0x40000003>;
@@ -416,7 +462,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+			big_cpu_sleep_1: cpu-sleep-1-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-rail-power-down";
 				arm,psci-suspend-param = <0x40000004>;
@@ -427,15 +473,29 @@
 			};
 		};
 
-		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+		domain_idle_states: domain-idle-states {
+			cluster_sleep_apss_off: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			cluster_sleep_cx_ret: cluster-sleep-1 {
 				compatible = "domain-idle-state";
-				idle-state-name = "cluster-power-down";
-				arm,psci-suspend-param = <0x40003444>;
+				arm,psci-suspend-param = <0x41001344>;
 				entry-latency-us = <3263>;
+				exit-latency-us = <4562>;
+				min-residency-us = <8467>;
+			};
+
+			cluster_sleep_llcc_off: cluster-sleep-2 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100b344>;
+				entry-latency-us = <3638>;
 				exit-latency-us = <6562>;
-				min-residency-us = <9926>;
-				local-timer-stop;
+				min-residency-us = <9826>;
 			};
 		};
 	};
@@ -561,12 +621,12 @@
 
 		cpu4_opp_2400mhz: opp-2400000000 {
 			opp-hz = /bits/ 64 <2400000000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 
 		cpu4_opp_2611mhz: opp-2611200000 {
 			opp-hz = /bits/ 64 <2611200000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 	};
 
@@ -626,22 +686,22 @@
 
 		cpu7_opp_2400mhz: opp-2400000000 {
 			opp-hz = /bits/ 64 <2400000000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 
 		cpu7_opp_2515mhz: opp-2515200000 {
 			opp-hz = /bits/ 64 <2515200000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 
 		cpu7_opp_2707mhz: opp-2707200000 {
 			opp-hz = /bits/ 64 <2707200000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 
 		cpu7_opp_3014mhz: opp-3014400000 {
 			opp-hz = /bits/ 64 <3014400000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 	};
 
@@ -654,6 +714,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sc7280", "qcom,scm";
+			qcom,dload-mode = <&tcsr_2 0x13000>;
 		};
 	};
 
@@ -787,8 +848,13 @@
 		};
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
@@ -796,57 +862,57 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CLUSTER_PD: power-domain-cluster {
+		cluster_pd: power-domain-cluster {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			domain-idle-states = <&cluster_sleep_apss_off &cluster_sleep_cx_ret &cluster_sleep_llcc_off>;
 		};
 	};
 
@@ -906,7 +972,7 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
 				 <0>, <&pcie1_phy>,
-				 <0>, <0>, <0>,
+				 <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
 				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
@@ -940,7 +1006,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			gpu_speed_bin: gpu_speed_bin@1e9 {
+			gpu_speed_bin: gpu-speed-bin@1e9 {
 				reg = <0x1e9 0x2>;
 				bits = <5 8>;
 			};
@@ -974,6 +1040,7 @@
 
 			bus-width = <8>;
 			supports-cqe;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -1383,12 +1450,12 @@
 			};
 
 			uart5: serial@994000 {
-				compatible = "qcom,geni-uart";
+				compatible = "qcom,geni-debug-uart";
 				reg = <0 0x00994000 0 0x4000>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				clock-names = "se";
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>;
+				pinctrl-0 = <&qup_uart5_tx>, <&qup_uart5_rx>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7280_CX>;
 				operating-points-v2 = <&qup_opp_table>;
@@ -2034,6 +2101,11 @@
 			};
 		};
 
+		rng: rng@10d3000 {
+			compatible = "qcom,sc7280-trng", "qcom,trng";
+			reg = <0 0x010d3000 0 0x1000>;
+		};
+
 		cnoc2: interconnect@1500000 {
 			reg = <0 0x01500000 0 0x1000>;
 			compatible = "qcom,sc7280-cnoc2";
@@ -2067,6 +2139,8 @@
 			reg = <0 0x016e0000 0 0x1c080>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
 		};
 
 		aggre2_noc: interconnect@1700000 {
@@ -2074,6 +2148,7 @@
 			compatible = "qcom,sc7280-aggre2-noc";
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
 		};
 
 		mmss_noc: interconnect@1740000 {
@@ -2126,7 +2201,136 @@
 			qcom,smem-state-names = "wlan-smp2p-out";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie0: pcie@1c00000 {
+			compatible = "qcom,pcie-sc7280";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>,
+			      <0 0x01c03000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+				 <&pcie0_phy>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>;
+			clock-names = "pipe",
+				      "pipe_mux",
+				      "phy_pipe",
+				      "ref",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu",
+				      "ddrss_sf_tbu",
+				      "aggre0",
+				      "aggre1";
+
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc GCC_PCIE_0_GDSC>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie0_clkreq_n>;
+			dma-coherent;
+
+			status = "disabled";
+
+			pcie0_port: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
+			reg = <0 0x01c06000 0 0x1000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_CLKREF_EN>,
+				 <&gcc GCC_PCIE0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			clock-output-names = "pcie_0_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+		};
+
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sc7280";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2146,14 +2350,30 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
@@ -2203,6 +2423,16 @@
 				    <0x100 &apps_smmu 0x1c81 0x1>;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0e000 {
@@ -2233,6 +2463,144 @@
 			status = "disabled";
 		};
 
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sc7280-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x80 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+
+			operating-points-v2 = <&ufs_opp_table>;
+
+			qcom,ice = <&ice>;
+
+			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-75000000 {
+					opp-hz = /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-150000000 {
+					opp-hz = /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sc7280-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_1_CLKREF_EN>;
+			clock-names = "ref", "ref_aux", "qref";
+
+			power-domains = <&rpmhpd SC7280_MX>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sc7280-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			iommus = <&apps_smmu 0x4e4 0x0011>,
+				 <&apps_smmu 0x4e6 0x0011>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <16>;
+			qcom,num-ees = <4>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sc7280-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x4e4 0x0011>,
+				 <&apps_smmu 0x4e4 0x0011>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "memory";
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sc7280-ipa";
 
@@ -2406,6 +2774,66 @@
 			status = "disabled";
 		};
 
+		lpass_wsa_macro: codec@3240000 {
+			compatible = "qcom,sc7280-lpass-wsa-macro";
+			reg = <0x0 0x03240000 0x0 0x1000>;
+
+			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+				 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_va_macro>;
+			clock-names = "mclk",
+				      "npl",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			pinctrl-0 = <&lpass_wsa_swr_clk>, <&lpass_wsa_swr_data>;
+			pinctrl-names = "default";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		swr2: soundwire@3250000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0x0 0x03250000 0x0 0x2000>;
+
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa_macro>;
+			clock-names = "iface";
+
+			resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>;
+			reset-names = "swr_audio_cgcr";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07
+								0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01
+							       0xff 0xff>;
+			qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
+								0xff 0xff>;
+			qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
+							    0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
 		lpass_audiocc: clock-controller@3300000 {
 			compatible = "qcom,sc7280-lpassaudiocc";
 			reg = <0 0x03300000 0 0x30000>,
@@ -2423,9 +2851,6 @@
 			compatible = "qcom,sc7280-lpass-va-macro";
 			reg = <0 0x03370000 0 0x1000>;
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
-
 			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>;
 			clock-names = "mclk";
 
@@ -2523,6 +2948,31 @@
 			status = "disabled";
 		};
 
+		slimbam: dma-controller@3a84000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0 0x03a84000 0 0x20000>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,controlled-remotely;
+			num-channels = <31>;
+			qcom,ee = <1>;
+			qcom,num-ees = <2>;
+			iommus = <&apps_smmu 0x1826 0x0>;
+			status = "disabled";
+		};
+
+		slim: slim-ngd@3ac0000 {
+			compatible = "qcom,slim-ngd-v1.5.0";
+			reg = <0 0x03ac0000 0 0x2c000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&slimbam 3>, <&slimbam 4>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x1826 0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		lpass_hm: clock-controller@3c00000 {
 			compatible = "qcom,sc7280-lpasshm";
 			reg = <0 0x03c00000 0 0x28>;
@@ -2551,41 +3001,77 @@
 			lpass_dmic01_clk: dmic01-clk-state {
 				pins = "gpio6";
 				function = "dmic1_clk";
+				drive-strength = <8>;
+				bias-disable;
 			};
 
 			lpass_dmic01_data: dmic01-data-state {
 				pins = "gpio7";
 				function = "dmic1_data";
+				drive-strength = <8>;
+				bias-pull-down;
 			};
 
 			lpass_dmic23_clk: dmic23-clk-state {
 				pins = "gpio8";
 				function = "dmic2_clk";
+				drive-strength = <8>;
+				bias-disable;
 			};
 
 			lpass_dmic23_data: dmic23-data-state {
 				pins = "gpio9";
 				function = "dmic2_data";
+				drive-strength = <8>;
+				bias-pull-down;
 			};
 
 			lpass_rx_swr_clk: rx-swr-clk-state {
 				pins = "gpio3";
 				function = "swr_rx_clk";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-disable;
 			};
 
 			lpass_rx_swr_data: rx-swr-data-state {
 				pins = "gpio4", "gpio5";
 				function = "swr_rx_data";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-bus-hold;
 			};
 
 			lpass_tx_swr_clk: tx-swr-clk-state {
 				pins = "gpio0";
 				function = "swr_tx_clk";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-disable;
 			};
 
 			lpass_tx_swr_data: tx-swr-data-state {
 				pins = "gpio1", "gpio2", "gpio14";
 				function = "swr_tx_data";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-bus-hold;
+			};
+
+			lpass_wsa_swr_clk: wsa-swr-clk-state {
+				pins = "gpio10";
+				function = "wsa_swr_clk";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-disable;
+			};
+
+			lpass_wsa_swr_data: wsa-swr-data-state {
+				pins = "gpio11";
+				function = "wsa_swr_data";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-bus-hold;
 			};
 		};
 
@@ -2598,7 +3084,8 @@
 				    "cx_mem",
 				    "cx_dbgc";
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-			iommus = <&adreno_smmu 0 0x401>;
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
 			operating-points-v2 = <&gpu_opp_table>;
 			qcom,gmu = <&gmu>;
 			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
@@ -2608,6 +3095,12 @@
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
 
+			status = "disabled";
+
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_zap_mem>;
+			};
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -2615,14 +3108,14 @@
 					opp-hz = /bits/ 64 <315000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <1804000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x17>;
 				};
 
 				opp-450000000 {
 					opp-hz = /bits/ 64 <450000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 					opp-peak-kBps = <4068000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x17>;
 				};
 
 				/* Only applicable for SKUs which has 550Mhz as Fmax */
@@ -2637,28 +3130,28 @@
 					opp-hz = /bits/ 64 <550000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 					opp-peak-kBps = <6832000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x16>;
 				};
 
 				opp-608000000 {
 					opp-hz = /bits/ 64 <608000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
 					opp-peak-kBps = <8368000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x16>;
 				};
 
 				opp-700000000 {
 					opp-hz = /bits/ 64 <700000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-812000000 {
 					opp-hz = /bits/ 64 <812000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-840000000 {
@@ -2772,12 +3265,24 @@
 					"gpu_cc_hub_aon_clk";
 
 			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		gfx_0_tbu: tbu@3dd9000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x3dd9000 0x0 0x1000>;
+			qcom,stream-id-range = <&adreno_smmu 0x0 0x400>;
+		};
+
+		gfx_1_tbu: tbu@3ddd000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x3ddd000 0x0 0x1000>;
+			qcom,stream-id-range = <&adreno_smmu 0x400 0x400>;
 		};
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sc7280-mpss-pas";
-			reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
-			reg-names = "qdsp6", "rmb";
+			reg = <0 0x04080000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -3047,7 +3552,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07040000 0 0x1000>;
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3067,7 +3572,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07140000 0 0x1000>;
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3087,7 +3592,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07240000 0 0x1000>;
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3107,7 +3612,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07340000 0 0x1000>;
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3127,7 +3632,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07440000 0 0x1000>;
 
-			cpu = <&CPU4>;
+			cpu = <&cpu4>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3147,7 +3652,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07540000 0 0x1000>;
 
-			cpu = <&CPU5>;
+			cpu = <&cpu5>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3167,7 +3672,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07640000 0 0x1000>;
 
-			cpu = <&CPU6>;
+			cpu = <&cpu6>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3187,7 +3692,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07740000 0 0x1000>;
 
-			cpu = <&CPU7>;
+			cpu = <&cpu7>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3329,6 +3834,7 @@
 			operating-points-v2 = <&sdhc2_opp_table>;
 
 			bus-width = <4>;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 
@@ -3399,16 +3905,42 @@
 
 			#clock-cells = <1>;
 			#phy-cells = <1>;
+
+			orientation-switch;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp_out>;
+					};
+				};
+			};
 		};
 
-		usb_2: usb@8cf8800 {
-			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
-			reg = <0 0x08cf8800 0 0x400>;
+		usb_2: usb@8c00000 {
+			compatible = "qcom,sc7280-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x08c00000 0 0xfc100>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			dma-ranges;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
 				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
@@ -3425,10 +3957,14 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 12 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 13 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "hs_phy_irq",
+			interrupts-extended = <&intc GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
 
@@ -3441,22 +3977,19 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_2_dwc3: usb@8c00000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x08c00000 0 0xe000>;
-				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0xa0 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				usb-role-switch;
+			iommus = <&apps_smmu 0xa0 0x0>;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			phys = <&usb_2_hsphy>;
+			phy-names = "usb2-phy";
+			maximum-speed = "high-speed";
+			usb-role-switch;
 
-				port {
-					usb2_role_switch: endpoint {
-						remote-endpoint = <&eud_ep>;
-					};
+			port {
+				usb2_role_switch: endpoint {
+					remote-endpoint = <&eud_ep>;
 				};
 			};
 		};
@@ -3479,8 +4012,156 @@
 			status = "disabled";
 		};
 
+		remoteproc_adsp: remoteproc@3700000 {
+			compatible = "qcom,sc7280-adsp-pas";
+			reg = <0 0x03700000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_LCX>,
+					<&rpmhpd SC7280_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+
+						q6usbdai: usbd {
+							compatible = "qcom,q6usb";
+							iommus = <&apps_smmu 0x180f 0x0>;
+							#sound-dai-cells = <1>;
+							qcom,usb-audio-intr-idx = /bits/ 16 <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1801 0x0>;
+
+							dai@0 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+							};
+
+							dai@1 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
+							};
+
+							dai@2 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+
 		remoteproc_wpss: remoteproc@8a00000 {
-			compatible = "qcom,sc7280-wpss-pil";
+			compatible = "qcom,sc7280-wpss-pas";
 			reg = <0 0x08a00000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
@@ -3492,12 +4173,8 @@
 			interrupt-names = "wdog", "fatal", "ready", "handover",
 					  "stop-ack", "shutdown-ack";
 
-			clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
-				 <&gcc GCC_WPSS_AHB_CLK>,
-				 <&gcc GCC_WPSS_RSCP_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ahb_bdg", "ahb",
-				      "rscp", "xo";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
 
 			power-domains = <&rpmhpd SC7280_CX>,
 					<&rpmhpd SC7280_MX>;
@@ -3510,11 +4187,6 @@
 			qcom,smem-states = <&wpss_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
-			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
-				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
-			reset-names = "restart", "pdc_sync";
-
-			qcom,halt-regs = <&tcsr_1 0x17000>;
 
 			status = "disabled";
 
@@ -3567,6 +4239,12 @@
 				opp-7 {
 					opp-peak-kBps = <8532000>;
 				};
+				opp-8 {
+					opp-peak-kBps = <10944000>;
+				};
+				opp-9 {
+					opp-peak-kBps = <12787200>;
+				};
 			};
 		};
 
@@ -3656,14 +4334,160 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
+		remoteproc_cdsp: remoteproc@a300000 {
+			compatible = "qcom,sc7280-cdsp-pas";
+			reg = <0 0x0a300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_CX>,
+					<&rpmhpd SC7280_MX>;
+			power-domain-names = "cx", "mx";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x11a1 0x0420>,
+							 <&apps_smmu 0x1181 0x0420>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x11a2 0x0420>,
+							 <&apps_smmu 0x1182 0x0420>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x11a3 0x0420>,
+							 <&apps_smmu 0x1183 0x0420>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x11a4 0x0420>,
+							 <&apps_smmu 0x1184 0x0420>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x11a5 0x0420>,
+							 <&apps_smmu 0x1185 0x0420>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x11a6 0x0420>,
+							 <&apps_smmu 0x1186 0x0420>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x11a7 0x0420>,
+							 <&apps_smmu 0x1187 0x0420>;
+						dma-coherent;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x11a8 0x0420>,
+							 <&apps_smmu 0x1188 0x0420>;
+						dma-coherent;
+					};
+
+					/* note: secure cb9 in downstream */
+
+					compute-cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&apps_smmu 0x11ab 0x0420>,
+							 <&apps_smmu 0x118b 0x0420>;
+						dma-coherent;
+					};
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&apps_smmu 0x11ac 0x0420>,
+							 <&apps_smmu 0x118c 0x0420>;
+						dma-coherent;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+						iommus = <&apps_smmu 0x11ad 0x0420>,
+							 <&apps_smmu 0x118d 0x0420>;
+						dma-coherent;
+					};
+
+					compute-cb@14 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <14>;
+						iommus = <&apps_smmu 0x11ae 0x0420>,
+							 <&apps_smmu 0x118e 0x0420>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a600000 {
+			compatible = "qcom,sc7280-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a600000 0 0xfc100>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			dma-ranges;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -3680,11 +4504,15 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 17 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
 					  "ss_phy_irq";
@@ -3700,16 +4528,35 @@
 
 			wakeup-source;
 
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xe000>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0xe0 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
-				phy-names = "usb2-phy", "usb3-phy";
-				maximum-speed = "super-speed";
+			iommus = <&apps_smmu 0xe0 0x0>;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,parkmode-disable-ss-quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			num-hc-interrupters = /bits/ 16 <3>;
+			phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy", "usb3-phy";
+			maximum-speed = "super-speed";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_dwc3_hs: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+					};
+				};
 			};
 		};
 
@@ -3736,21 +4583,10 @@
 					<&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
 			interconnect-names = "cpu-cfg", "video-mem";
 
-			iommus = <&apps_smmu 0x2180 0x20>,
-				 <&apps_smmu 0x2184 0x20>;
+			iommus = <&apps_smmu 0x2180 0x20>;
 			memory-region = <&video_mem>;
 
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
-
-			video-firmware {
-				iommus = <&apps_smmu 0x21a2 0x0>;
-			};
+			status = "disabled";
 
 			venus_opp_table: opp-table {
 				compatible = "operating-points-v2";
@@ -3793,6 +4629,264 @@
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4a000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4b000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci2_default &cci3_default>;
+			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: isp@acb3000 {
+			compatible = "qcom,sc7280-camss";
+
+			reg = <0x0 0x0acb3000 0x0 0x1000>,
+			      <0x0 0x0acba000 0x0 0x1000>,
+			      <0x0 0x0acc1000 0x0 0x1000>,
+			      <0x0 0x0acc8000 0x0 0x1000>,
+			      <0x0 0x0accf000 0x0 0x1000>,
+			      <0x0 0x0ace0000 0x0 0x2000>,
+			      <0x0 0x0ace2000 0x0 0x2000>,
+			      <0x0 0x0ace4000 0x0 0x2000>,
+			      <0x0 0x0ace6000 0x0 0x2000>,
+			      <0x0 0x0ace8000 0x0 0x2000>,
+			      <0x0 0x0acaf000 0x0 0x4000>,
+			      <0x0 0x0acb6000 0x0 0x4000>,
+			      <0x0 0x0acbd000 0x0 0x4000>,
+			      <0x0 0x0acc4000 0x0 0x4000>,
+			      <0x0 0x0accb000 0x0 0x4000>;
+			reg-names = "csid0",
+				    "csid1",
+				    "csid2",
+				    "csid_lite0",
+				    "csid_lite1",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "csiphy3",
+				    "csiphy4",
+				    "vfe0",
+				    "vfe1",
+				    "vfe2",
+				    "vfe_lite0",
+				    "vfe_lite1";
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY4_CLK>,
+				 <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>,
+				 <&camcc CAM_CC_ICP_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_1_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_2_CLK>,
+				 <&camcc CAM_CC_IFE_2_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_2_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_2_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_0_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_1_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "csiphy4",
+				      "csiphy4_timer",
+				      "gcc_axi_hf",
+				      "gcc_axi_sf",
+				      "icp_ahb",
+				      "vfe0",
+				      "vfe0_axi",
+				      "vfe0_cphy_rx",
+				      "vfe0_csid",
+				      "vfe1",
+				      "vfe1_axi",
+				      "vfe1_cphy_rx",
+				      "vfe1_csid",
+				      "vfe2",
+				      "vfe2_axi",
+				      "vfe2_cphy_rx",
+				      "vfe2_csid",
+				      "vfe_lite0",
+				      "vfe_lite0_cphy_rx",
+				      "vfe_lite0_csid",
+				      "vfe_lite1",
+				      "vfe_lite1_cphy_rx",
+				      "vfe_lite1_csid";
+
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid_lite0",
+					  "csid_lite1",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csiphy3",
+					  "csiphy4",
+					  "vfe0",
+					  "vfe1",
+					  "vfe2",
+					  "vfe_lite0",
+					  "vfe_lite1";
+
+			interconnects = <&gem_noc  MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc2 SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_CAMNOC_HF  QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ahb",
+					     "hf_0";
+
+			iommus = <&apps_smmu 0x800 0x4e0>;
+
+			power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+					<&camcc CAM_CC_IFE_1_GDSC>,
+					<&camcc CAM_CC_IFE_2_GDSC>,
+					<&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "ife0",
+					     "ife1",
+					     "ife2",
+					     "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+
+				port@4 {
+					reg = <4>;
+				};
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc7280-camcc";
 			reg = <0 0x0ad00000 0 0x10000>;
@@ -3810,8 +4904,8 @@
 			reg = <0 0x0af00000 0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
-				 <&mdss_dsi_phy 0>,
-				 <&mdss_dsi_phy 1>,
+				 <&mdss_dsi_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&mdss_edp_phy 0>,
@@ -3847,11 +4941,17 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc2 SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x900 0x402>;
 
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -3861,7 +4961,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sc7280-dpu";
 				reg = <0 0x0ae01000 0 0x8f030>,
-					<0 0x0aeb0000 0 0x2008>;
+					<0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -3934,6 +5034,11 @@
 						opp-hz = /bits/ 64 <506666667>;
 						required-opps = <&rpmhpd_opp_nom>;
 					};
+
+					opp-608000000 {
+						opp-hz = /bits/ 64 <608000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
 				};
 			};
 
@@ -3959,8 +5064,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC7280_CX>;
@@ -4037,7 +5144,8 @@
 				reg = <0 0x0aea0000 0 0x200>,
 				      <0 0x0aea0200 0 0x200>,
 				      <0 0x0aea0400 0 0xc00>,
-				      <0 0x0aea1000 0 0x400>;
+				      <0 0x0aea1000 0 0x400>,
+				      <0 0x0aea1400 0 0x400>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <14>;
@@ -4174,7 +5282,9 @@
 
 					port@1 {
 						reg = <1>;
-						mdss_dp_out: endpoint { };
+						mdss_dp_out: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+						};
 					};
 				};
 
@@ -4298,6 +5408,62 @@
 			gpio-ranges = <&tlmm 0 0 175>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_default: cci3-default-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			dp_hot_plug_det: dp-hot-plug-det-state {
 				pins = "gpio47";
 				function = "dp_hot";
@@ -4348,6 +5514,11 @@
 				function = "mi2s1_ws";
 			};
 
+			pcie0_clkreq_n: pcie0-clkreq-n-state {
+				pins = "gpio88";
+				function = "pcie0_clkreqn";
+			};
+
 			pcie1_clkreq_n: pcie1-clkreq-n-state {
 				pins = "gpio79";
 				function = "pcie1_clkreqn";
@@ -4803,16 +5974,6 @@
 				function = "qup04";
 			};
 
-			qup_uart5_cts: qup-uart5-cts-state {
-				pins = "gpio20";
-				function = "qup05";
-			};
-
-			qup_uart5_rts: qup-uart5-rts-state {
-				pins = "gpio21";
-				function = "qup05";
-			};
-
 			qup_uart5_tx: qup-uart5-tx-state {
 				pins = "gpio22";
 				function = "qup05";
@@ -5198,6 +6359,83 @@
 				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		anoc_1_tbu: tbu@151dd000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151dd000 0x0 0x1000>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>;
+			qcom,stream-id-range = <&apps_smmu 0x0 0x400>;
+		};
+
+		anoc_2_tbu: tbu@151e1000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151e1000 0x0 0x1000>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>;
+			qcom,stream-id-range = <&apps_smmu 0x400 0x400>;
+		};
+
+		mnoc_hf_0_tbu: tbu@151e5000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151e5000 0x0 0x1000>;
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x800 0x400>;
+		};
+
+		mnoc_hf_1_tbu: tbu@151e9000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151e9000 0x0 0x1000>;
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0xc00 0x400>;
+		};
+
+		compute_dsp_1_tbu: tbu@151ed000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151ed000 0x0 0x1000>;
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU1_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x1000 0x400>;
+		};
+
+		compute_dsp_0_tbu: tbu@151f1000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151f1000 0x0 0x1000>;
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x1400 0x400>;
+		};
+
+		adsp_tbu: tbu@151f5000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151f5000 0x0 0x1000>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &lpass_ag_noc SLAVE_LPASS_CORE_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			qcom,stream-id-range = <&apps_smmu 0x1800 0x400>;
+		};
+
+		anoc_1_pcie_tbu: tbu@151f9000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151f9000 0x0 0x1000>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>;
+			qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>;
+		};
+
+		mnoc_sf_0_tbu: tbu@151fd000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151fd000 0x0 0x1000>;
+			interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x2000 0x400>;
+		};
+
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
@@ -5222,7 +6460,7 @@
 			compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 			status = "reserved"; /* Owned by Gunyah hyp */
 		};
 
@@ -5299,7 +6537,7 @@
 					  <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>,
 					  <CONTROL_TCS 1>;
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
@@ -5387,10 +6625,12 @@
 		};
 	};
 
+	sound: sound {
+	};
+
 	thermal_zones: thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -5417,24 +6657,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu0_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu0_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -5461,24 +6700,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu1_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu1_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -5505,24 +6743,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu2_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu2_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -5549,24 +6786,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu3_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu3_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -5593,24 +6829,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu4_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu4_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -5637,24 +6872,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu5_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu5_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -5681,24 +6915,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu6_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu6_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -5725,24 +6958,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu7_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu7_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu8-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -5769,24 +7001,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu8_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu8_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu9-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -5813,24 +7044,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu9_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu9_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu10-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -5857,24 +7087,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu10_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu10_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu11-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -5901,24 +7130,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu11_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu11_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		aoss0-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -5939,7 +7167,6 @@
 
 		aoss1-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -5960,7 +7187,6 @@
 
 		cpuss0-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -5980,7 +7206,6 @@
 
 		cpuss1-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -6000,7 +7225,6 @@
 
 		gpuss0-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -6028,7 +7252,6 @@
 
 		gpuss1-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -6055,9 +7278,6 @@
 		};
 
 		nspss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
@@ -6076,9 +7296,6 @@
 		};
 
 		nspss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
@@ -6097,9 +7314,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
@@ -6118,9 +7332,6 @@
 		};
 
 		ddr-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 6>;
 
 			trips {
@@ -6139,9 +7350,6 @@
 		};
 
 		mdmss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 7>;
 
 			trips {
@@ -6160,9 +7368,6 @@
 		};
 
 		mdmss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
@@ -6181,9 +7386,6 @@
 		};
 
 		mdmss2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
@@ -6202,9 +7404,6 @@
 		};
 
 		mdmss3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 10>;
 
 			trips {
@@ -6223,9 +7422,6 @@
 		};
 
 		camera0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 11>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index 3ea07d094b60..08d0784d0cbb 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -51,6 +51,8 @@
 
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 58 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";
@@ -66,7 +68,7 @@
 					reg = <0>;
 
 					pmic_glink_con0_hs: endpoint {
-						remote-endpoint = <&usb_prim_role_switch>;
+						remote-endpoint = <&usb_prim_dwc3_hs>;
 					};
 				};
 
@@ -101,7 +103,7 @@
 					reg = <0>;
 
 					pmic_glink_con1_hs: endpoint {
-						remote-endpoint = <&usb_sec_role_switch>;
+						remote-endpoint = <&usb_sec_dwc3_hs>;
 					};
 				};
 
@@ -329,12 +331,18 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10e_2p9: ldo10 {
 			regulator-min-microvolt = <2904000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l16e_3p0: ldo16 {
@@ -350,49 +358,58 @@
 
 	zap-shader {
 		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
+		firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn";
 	};
 };
 
 &i2c1 {
 	clock-frequency = <100000>;
 
-	pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>;
+	pinctrl-0 = <&i2c1_active>;
 	pinctrl-names = "default";
 
 	status = "okay";
 
-	hid@10 {
+	touchscreen@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
 		hid-descr-addr = <0x1>;
 
 		interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts_int_default>;
+		pinctrl-names = "default";
 	};
 };
 
 &i2c7 {
-	clock-frequency = <100000>;
+	clock-frequency = <1000000>;
 
-	pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>;
+	pinctrl-0 = <&i2c7_active>;
 	pinctrl-names = "default";
 
 	status = "okay";
 
-	hid@5 {
+	keyboard@5 {
 		compatible = "hid-over-i2c";
 		reg = <0x5>;
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kb_int_default>;
+		pinctrl-names = "default";
 	};
 
-	hid@2c {
+	touchpad@2c {
 		compatible = "hid-over-i2c";
 		reg = <0x2c>;
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tp_int_default>;
+		pinctrl-names = "default";
 	};
 };
 
@@ -419,8 +436,6 @@
 };
 
 &mdss_edp {
-	data-lanes = <0 1 2 3>;
-
 	pinctrl-0 = <&edp_hpd_active>;
 	pinctrl-names = "default";
 
@@ -440,20 +455,16 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss_edp_out: endpoint {
-				remote-endpoint = <&auo_b140han06_in>;
-			};
-		};
-	};
+&mdss_edp_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&auo_b140han06_in>;
 };
 
 &pcie3 {
-	perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 180 GPIO_ACTIVE_HIGH>;
 	pinctrl-0 = <&pcie3_default_state>;
 	pinctrl-names = "default";
 
@@ -467,6 +478,10 @@
 	status = "okay";
 };
 
+&pmc8180_pwrkey {
+	status = "okay";
+};
+
 &pmc8180c_lpg {
 	status = "okay";
 };
@@ -540,6 +555,40 @@
 	status = "okay";
 };
 
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	status = "okay";
+};
+
 &usb_prim_hsphy {
 	vdda-pll-supply = <&vreg_l5e_0p88>;
 	vdda18-supply = <&vreg_l12a_1p8>;
@@ -565,6 +614,10 @@
 	dr_mode = "host";
 };
 
+&usb_prim_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_prim_qmpphy_dp_in {
 	remote-endpoint = <&mdss_dp0_out>;
 };
@@ -573,8 +626,8 @@
 	remote-endpoint = <&pmic_glink_con0_ss>;
 };
 
-&usb_prim_role_switch {
-	remote-endpoint = <&pmic_glink_con0_hs>;
+&usb_sec_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
 };
 
 &usb_sec_hsphy {
@@ -602,10 +655,6 @@
 	remote-endpoint = <&pmic_glink_con1_ss>;
 };
 
-&usb_sec_role_switch {
-	remote-endpoint = <&pmic_glink_con1_hs>;
-};
-
 &usb_sec {
 	status = "okay";
 };
@@ -626,10 +675,6 @@
 	status = "okay";
 };
 
-&xo_board_clk {
-	clock-frequency = <38400000>;
-};
-
 /* PINCTRL */
 
 &pmc8180c_gpios {
@@ -669,14 +714,6 @@
 		drive-strength = <2>;
 	};
 
-	i2c1_hid_active: i2c1-hid-active-state {
-		pins = "gpio122";
-		function = "gpio";
-
-		bias-pull-up;
-		drive-strength = <2>;
-	};
-
 	i2c7_active: i2c7-active-state {
 		pins = "gpio98", "gpio99";
 		function = "qup7";
@@ -685,8 +722,8 @@
 		drive-strength = <2>;
 	};
 
-	i2c7_hid_active: i2c7-hid-active-state {
-		pins = "gpio37", "gpio24";
+	kb_int_default: kb-int-default-state {
+		pins = "gpio37";
 		function = "gpio";
 
 		bias-pull-up;
@@ -718,6 +755,22 @@
 		};
 	};
 
+	tp_int_default: tp-int-default-state {
+		pins = "gpio24";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio122";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
 	usbprim_sbu_default: usbprim-sbu-state {
 		oe-n-pins {
 			pins = "gpio152";
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
index ddc84282f142..451c9b984f1f 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
@@ -13,7 +13,6 @@
 	thermal-zones {
 		pmc8180-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmc8180_temp>;
 
@@ -40,7 +39,6 @@
 
 		pmc8180c-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmc8180c_temp>;
 
@@ -77,7 +75,7 @@
 		pon: pon@800 {
 			compatible = "qcom,pm8916-pon";
 			reg = <0x0800>;
-			pwrkey {
+			pmc8180_pwrkey: pwrkey {
 				compatible = "qcom,pm8941-pwrkey";
 				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
 				debounce = <15625>;
@@ -141,11 +139,11 @@
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 		};
 
-		pmc8180_gpios: gpio@c000 {
+		pmc8180_1_gpios: gpio@c000 {
 			compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pmc8180_gpios 0 0 10>;
+			gpio-ranges = <&pmc8180_1_gpios 0 0 10>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -200,11 +198,21 @@
 		#size-cells = <0>;
 	};
 
-	pmic@8 {
+	pmc8180_2: pmic@8 {
 		compatible = "qcom,pm8150", "qcom,spmi-pmic";
 		reg = <0x8 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pmc8180_2_gpios: gpio@c000 {
+			compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmc8180_2_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pmic@a {
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
index fd2fab4895b3..93de9fe918eb 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -43,7 +43,7 @@
 		pinctrl-0 = <&hall_int_active_state>;
 
 		lid-switch {
-			gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+			gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_LID>;
 			wakeup-source;
@@ -71,7 +71,7 @@
 					reg = <0>;
 
 					pmic_glink_con0_hs: endpoint {
-						remote-endpoint = <&usb_prim_role_switch>;
+						remote-endpoint = <&usb_prim_dwc3_hs>;
 					};
 				};
 
@@ -106,7 +106,7 @@
 					reg = <0>;
 
 					pmic_glink_con1_hs: endpoint {
-						remote-endpoint = <&usb_sec_role_switch>;
+						remote-endpoint = <&usb_sec_dwc3_hs>;
 					};
 				};
 
@@ -223,6 +223,32 @@
 		vin-supply = <&vph_pwr>;
 	};
 
+	vreg_usb2_host_en: regulator-usb2-host-en {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_host_en";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&pmc8180_1_gpios 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-always-on;
+	};
+
+	vreg_usb3_host_en: regulator-usb3-host-en {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_host_en";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&pmc8180_2_gpios 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-always-on;
+	};
+
 	usbprim-sbu-mux {
 		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
 
@@ -386,12 +412,18 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10e_2p9: ldo10 {
 			regulator-min-microvolt = <2904000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l12e: ldo12 {
@@ -499,8 +531,6 @@
 };
 
 &mdss_edp {
-	data-lanes = <0 1 2 3>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&edp_hpd_active>;
 
@@ -519,20 +549,16 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss_edp_out: endpoint {
-				remote-endpoint = <&auo_b133han05_in>;
-			};
-		};
-	};
+&mdss_edp_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&auo_b133han05_in>;
 };
 
 &pcie1 {
-	perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2_default_state>;
 
@@ -546,6 +572,10 @@
 	status = "okay";
 };
 
+&pmc8180_pwrkey {
+	status = "okay";
+};
+
 &pmc8180c_lpg {
 	status = "okay";
 };
@@ -617,6 +647,40 @@
 	status = "okay";
 };
 
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	status = "okay";
+};
+
 &usb_prim_hsphy {
 	vdda-pll-supply = <&vreg_l5e_0p88>;
 	vdda18-supply = <&vreg_l12a_1p8>;
@@ -642,6 +706,10 @@
 	dr_mode = "host";
 };
 
+&usb_prim_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_prim_qmpphy_dp_in {
 	remote-endpoint = <&mdss_dp0_out>;
 };
@@ -650,10 +718,6 @@
 	remote-endpoint = <&pmic_glink_con0_ss>;
 };
 
-&usb_prim_role_switch {
-	remote-endpoint = <&pmic_glink_con0_hs>;
-};
-
 &usb_sec_hsphy {
 	vdda-pll-supply = <&vreg_l5e_0p88>;
 	vdda18-supply = <&vreg_l12a_1p8>;
@@ -679,10 +743,6 @@
 	remote-endpoint = <&pmic_glink_con1_ss>;
 };
 
-&usb_sec_role_switch {
-	remote-endpoint = <&pmic_glink_con1_hs>;
-};
-
 &usb_sec {
 	status = "okay";
 };
@@ -691,6 +751,10 @@
 	dr_mode = "host";
 };
 
+&usb_sec_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &wifi {
 	memory-region = <&wlan_mem>;
 
@@ -703,10 +767,6 @@
 	status = "okay";
 };
 
-&xo_board_clk {
-	clock-frequency = <38400000>;
-};
-
 /* PINCTRL */
 
 &pmc8180c_gpios {
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index a34f438ef2d9..85c2afcb417d 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -5,12 +5,17 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8180x-camcc.h>
+#include <dt-bindings/clock/qcom,videocc-sm8150.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8180x.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -40,28 +45,28 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <602>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 0>;
 
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -69,207 +74,207 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <602>;
-			next-level-cache = <&L2_100>;
+			next-level-cache = <&l2_100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 0>;
 
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <602>;
-			next-level-cache = <&L2_200>;
+			next-level-cache = <&l2_200>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 0>;
 
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <602>;
-			next-level-cache = <&L2_300>;
+			next-level-cache = <&l2_300>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 0>;
 
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-unified;
 				cache-level = <2>;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x400>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_400>;
+			next-level-cache = <&l2_400>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 1>;
 
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-unified;
 				cache-level = <2>;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x500>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_500>;
+			next-level-cache = <&l2_500>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 1>;
 
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-unified;
 				cache-level = <2>;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_600>;
+			next-level-cache = <&l2_600>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 1>;
 
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-unified;
 				cache-level = <2>;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_700>;
+			next-level-cache = <&l2_700>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 1>;
 
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-unified;
 				cache-level = <2>;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -277,7 +282,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x40000004>;
 				entry-latency-us = <355>;
@@ -286,10 +291,10 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <241>;
+				entry-latency-us = <2411>;
 				exit-latency-us = <1461>;
 				min-residency-us = <4488>;
 				local-timer-stop;
@@ -297,7 +302,15 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			cluster_sleep_apss_off: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <3300>;
+				exit-latency-us = <3300>;
+				min-residency-us = <6000>;
+			};
+
+			cluster_sleep_aoss_sleep: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100a344>;
 				entry-latency-us = <3263>;
@@ -531,57 +544,57 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CLUSTER_PD: power-domain-cpu-cluster0 {
+		cluster_pd: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			domain-idle-states = <&cluster_sleep_apss_off &cluster_sleep_aoss_sleep>;
 		};
 	};
 
@@ -781,6 +794,7 @@
 			clock-names = "bi_tcxo",
 				      "bi_tcxo_ao",
 				      "sleep_clk";
+			power-domains = <&rpmhpd SC8180X_CX>;
 		};
 
 		qupv3_id_0: geniqup@8c0000 {
@@ -1684,7 +1698,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1707,36 +1721,47 @@
 			ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
-				      "slave_q2a",
-				      "ref",
-				      "tbu";
+				      "slave_q2a";
 
 			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1d80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
 
@@ -1751,8 +1776,19 @@
 
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -1761,7 +1797,7 @@
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
 				 <&gcc GCC_PCIE_0_PIPE_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
@@ -1781,7 +1817,7 @@
 			status = "disabled";
 		};
 
-		pcie3: pci@1c08000 {
+		pcie3: pcie@1c08000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1804,36 +1840,47 @@
 			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_3_PIPE_CLK>,
 				 <&gcc GCC_PCIE_3_AUX_CLK>,
 				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_3_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_3_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_3_CLKREF_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+				 <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
-				      "slave_q2a",
-				      "ref",
-				      "tbu";
+				      "slave_q2a";
 
 			assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1e00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
 				    <0x100 &apps_smmu 0x1e01 0x1>;
 
@@ -1843,13 +1890,24 @@
 			power-domains = <&gcc PCIE_3_GDSC>;
 
 			interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_3 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			phys = <&pcie3_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie3_phy: phy@1c0c000 {
@@ -1858,7 +1916,7 @@
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_3_CLKREF_CLK>,
-				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE3_PHY_REFGEN_CLK>,
 				 <&gcc GCC_PCIE_3_PIPE_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
@@ -1879,7 +1937,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c10000 {
+		pcie1: pcie@1c10000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c10000 0 0x3000>,
 			      <0 0x68000000 0 0xf1d>,
@@ -1902,36 +1960,47 @@
 			ranges = <0x01000000 0x0 0x68200000 0x0 0x68200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x68300000 0x0 0x68300000 0x0 0x3d00000>;
 
-			interrupts = <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
-				      "slave_q2a",
-				      "ref",
-				      "tbu";
+				      "slave_q2a";
 
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1c80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
 				    <0x100 &apps_smmu 0x1c81 0x1>;
 
@@ -1941,13 +2010,24 @@
 			power-domains = <&gcc PCIE_1_GDSC>;
 
 			interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_1 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c16000 {
@@ -1977,7 +2057,7 @@
 			status = "disabled";
 		};
 
-		pcie2: pci@1c18000 {
+		pcie2: pcie@1c18000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c18000 0 0x3000>,
 			      <0 0x70000000 0 0xf1d>,
@@ -2000,36 +2080,47 @@
 			ranges = <0x01000000 0x0 0x70200000 0x0 0x70200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>;
 
-			interrupts = <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 670 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
 				 <&gcc GCC_PCIE_2_AUX_CLK>,
 				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_2_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_2_CLKREF_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+				 <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
-				      "slave_q2a",
-				      "ref",
-				      "tbu";
+				      "slave_q2a";
 
 			assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1d00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d00 0x1>,
 				    <0x100 &apps_smmu 0x1d01 0x1>;
 
@@ -2039,13 +2130,24 @@
 			power-domains = <&gcc PCIE_2_GDSC>;
 
 			interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_2 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			phys = <&pcie2_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie2_phy: phy@1c1c000 {
@@ -2062,7 +2164,7 @@
 				      "refgen",
 				      "pipe";
 			#clock-cells = <0>;
-			clock-output-names = "pcie_3_pipe_clk";
+			clock-output-names = "pcie_2_pipe_clk";
 
 			#phy-cells = <0>;
 
@@ -2114,6 +2216,14 @@
 					<0 0>,
 					<0 0>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_0_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
 			status = "disabled";
 		};
 
@@ -2122,25 +2232,22 @@
 			reg = <0 0x01d87000 0 0x1000>;
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_EN>;
 			clock-names = "ref",
-				      "ref_aux";
+				      "ref_aux",
+				      "qref";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			#phy-cells = <0>;
 
 			status = "disabled";
 		};
 
-		ipa_virt: interconnect@1e00000 {
-			compatible = "qcom,sc8180x-ipa-virt";
-			reg = <0 0x01e00000 0 0x1000>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -2149,7 +2256,6 @@
 
 		gpu: gpu@2c00000 {
 			compatible = "qcom,adreno-680.1", "qcom,adreno";
-			#stream-id-cells = <16>;
 
 			reg = <0 0x02c00000 0 0x40000>;
 			reg-names = "kgsl_3d0_reg_memory";
@@ -2164,6 +2270,8 @@
 			interconnect-names = "gfx-mem";
 
 			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
+
 			status = "disabled";
 
 			gpu_opp_table: opp-table {
@@ -2394,28 +2502,53 @@
 			status = "disabled";
 		};
 
-		usb_prim_qmpphy: phy@88e9000 {
+		usb_mp_hsphy0: phy@88e4000 {
+			compatible = "qcom,sc8180x-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e4000 0 0x400>;
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_MP0_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_mp_hsphy1: phy@88e5000 {
+			compatible = "qcom,sc8180x-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e5000 0 0x400>;
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_MP1_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_prim_qmpphy: phy@88e8000 {
 			compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x38>,
-			      <0 0x088ea000 0 0x40>;
-			reg-names = "reg-base", "dp_com";
+			reg = <0 0x088e8000 0 0x3000>;
+
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
 			clock-names = "aux",
-				      "ref_clk_src",
 				      "ref",
-				      "com_aux";
+				      "com_aux",
+				      "usb3_pipe";
+
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>;
 			reset-names = "phy", "common";
 
 			#clock-cells = <1>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			#phy-cells = <1>;
 
 			status = "disabled";
 
@@ -2429,59 +2562,94 @@
 					usb_prim_qmpphy_out: endpoint {};
 				};
 
+				port@1 {
+					reg = <1>;
+
+					usb_prim_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_prim_dwc3_ss>;
+					};
+				};
+
 				port@2 {
 					reg = <2>;
 
 					usb_prim_qmpphy_dp_in: endpoint {};
 				};
 			};
+		};
 
-			usb_prim_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_prim_phy_pipe_clk_src";
-			};
+		usb_mp_qmpphy0: phy@88eb000 {
+			compatible = "qcom,sc8180x-qmp-usb3-uni-phy";
+			reg = <0 0x088eb000 0 0x1000>;
 
-			usb_prim_dpphy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+				 <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_mp_qmpphy1: phy@88ec000 {
+			compatible = "qcom,sc8180x-qmp-usb3-uni-phy";
+			reg = <0 0x088ec000 0 0x1000>;
+
+			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+				 <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		usb_sec_qmpphy: phy@88ee000 {
 			compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
-			reg = <0 0x088ee000 0 0x18c>,
-			      <0 0x088ed000 0 0x10>,
-			      <0 0x088ef000 0 0x40>;
-			reg-names = "reg-base", "dp_com";
+			reg = <0 0x088ed000 0 0x3000>;
+
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
 			clock-names = "aux",
-				      "ref_clk_src",
 				      "ref",
-				      "com_aux";
+				      "com_aux",
+				      "usb3_pipe";
 			resets = <&gcc GCC_USB3_DP_PHY_SEC_BCR>,
 				 <&gcc GCC_USB3_PHY_SEC_BCR>;
 			reset-names = "phy", "common";
 
 			#clock-cells = <1>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			#phy-cells = <1>;
 
 			status = "disabled";
 
@@ -2495,46 +2663,32 @@
 					usb_sec_qmpphy_out: endpoint {};
 				};
 
+				port@1 {
+					reg = <1>;
+
+					usb_sec_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_sec_dwc3_ss>;
+					};
+				};
+
 				port@2 {
 					reg = <2>;
 
 					usb_sec_qmpphy_dp_in: endpoint {};
 				};
 			};
-
-			usb_sec_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088ee200 0 0x200>,
-				      <0 0x088ee400 0 0x200>,
-				      <0 0x088eec00 0 0x218>,
-				      <0 0x088ee600 0 0x200>,
-				      <0 0x088ee800 0 0x200>,
-				      <0 0x088eea00 0 0x100>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_sec_phy_pipe_clk_src";
-			};
-
-			usb_sec_dpphy: dp-phy@88ef200 {
-				reg = <0 0x088ef200 0 0x200>,
-				      <0 0x088ef400 0 0x200>,
-				      <0 0x088efa00 0 0x200>,
-				      <0 0x088ef600 0 0x200>,
-				      <0 0x088ef800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-				clock-output-names = "qmp_dptx1_phy_pll_link_clk",
-						     "qmp_dptx1_phy_pll_vco_div_clk";
-			};
 		};
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc8180x-llcc";
-			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
-			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
-			      <0 0x09600000 0 0x50000>;
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+			      <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>,
+			      <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
 			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
-				    "llcc3_base", "llcc_broadcast_base";
+				    "llcc3_base", "llcc4_base", "llcc5_base",
+				    "llcc6_base", "llcc7_base",  "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -2545,17 +2699,91 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		usb_mp: usb@a4f8800 {
+			compatible = "qcom,sc8180x-dwc3-mp", "qcom,dwc3";
+			reg = <0 0x0a4f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+				 <&gcc GCC_USB30_MP_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+				 <&gcc GCC_USB30_MP_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			interconnects = <&aggre1_noc MASTER_USB3_2 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_2 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MP_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 59 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 46 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 71 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 68 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event_1", "pwr_event_2",
+					  "hs_phy_1",	 "hs_phy_2",
+					  "dp_hs_phy_1", "dm_hs_phy_1",
+					  "dp_hs_phy_2", "dm_hs_phy_2",
+					  "ss_phy_1",	 "ss_phy_2";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			resets = <&gcc GCC_USB30_MP_BCR>;
+
+			status = "disabled";
+
+			usb_mp_dwc3: usb@a400000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a400000 0 0xcd00>;
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x60 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				phys = <&usb_mp_hsphy0>,
+				       <&usb_mp_qmpphy0>,
+				       <&usb_mp_hsphy1>,
+				       <&usb_mp_qmpphy1>;
+				phy-names = "usb2-0",
+					    "usb3-0",
+					    "usb2-1",
+					    "usb3-1";
+				dr_mode = "host";
+			};
+		};
+
 		usb_prim: usb@a6f8800 {
 			compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -2594,11 +2822,28 @@
 				iommus = <&apps_smmu 0x140 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				phys = <&usb_prim_hsphy>, <&usb_prim_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_prim_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_prim_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_prim_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_prim_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
@@ -2622,12 +2867,17 @@
 				      "xo";
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 			power-domains = <&gcc USB30_SEC_GDSC>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 40 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
@@ -2651,17 +2901,61 @@
 				iommus = <&apps_smmu 0x160 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				phys = <&usb_sec_hsphy>, <&usb_sec_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_sec_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_sec_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_sec_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_sec_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
 		};
 
-		mdss: mdss@ae00000 {
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,sc8180x-videocc",
+				     "qcom,sm8150-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bi_tcxo";
+			power-domains = <&rpmhpd SC8180X_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sc8180x-camcc";
+			reg = <0 0x0ad00000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SC8180X_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sc8180x-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
@@ -2683,9 +2977,15 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
-			interconnect-names = "mdp0-mem", "mdp1-mem";
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&mmss_noc MASTER_MDP_PORT1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x800 0x420>;
 
@@ -2695,31 +2995,33 @@
 
 			status = "disabled";
 
-			mdss_mdp: mdp@ae01000 {
+			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sc8180x-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
 					 <&gcc GCC_DISP_HF_AXI_CLK>,
 					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
-					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>;
 				clock-names = "iface",
 					      "bus",
 					      "core",
-					      "vsync";
+					      "vsync",
+					      "rot",
+					      "lut";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				assigned-clock-rates = <460000000>,
-						       <19200000>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
 
 				operating-points-v2 = <&mdp_opp_table>;
 				power-domains = <&rpmhpd SC8180X_MMCX>;
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0>;
 
 				ports {
 					#address-cells = <1>;
@@ -2787,12 +3089,13 @@
 			};
 
 			mdss_dsi0: dsi@ae94000 {
-				compatible = "qcom,mdss-dsi-ctrl";
+				compatible = "qcom,sc8180x-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <4>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -2853,7 +3156,7 @@
 				};
 			};
 
-			mdss_dsi0_phy: dsi-phy@ae94400 {
+			mdss_dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
@@ -2873,12 +3176,13 @@
 			};
 
 			mdss_dsi1: dsi@ae96000 {
-				compatible = "qcom,mdss-dsi-ctrl";
+				compatible = "qcom,sc8180x-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae96000 0 0x400>;
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <5>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
@@ -2920,7 +3224,7 @@
 				};
 			};
 
-			mdss_dsi1_phy: dsi-phy@ae96400 {
+			mdss_dsi1_phy: phy@ae96400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
@@ -2944,25 +3248,31 @@
 				reg = <0 0xae90000 0 0x200>,
 				      <0 0xae90200 0 0x200>,
 				      <0 0xae90400 0 0x600>,
-				      <0 0xae90a00 0 0x400>;
+				      <0 0xae90a00 0 0x400>,
+				      <0 0xae91000 0 0x400>;
 				interrupt-parent = <&mdss>;
 				interrupts = <12>;
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&usb_prim_dpphy 0>, <&usb_prim_dpphy 1>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+							 <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
-				phys = <&usb_prim_dpphy>;
+				phys = <&usb_prim_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				#sound-dai-cells = <0>;
@@ -3020,25 +3330,31 @@
 				reg = <0 0xae98000 0 0x200>,
 				      <0 0xae98200 0 0x200>,
 				      <0 0xae98400 0 0x600>,
-				      <0 0xae98a00 0 0x400>;
+				      <0 0xae98a00 0 0x400>,
+				      <0 0xae99000 0 0x400>;
 				interrupt-parent = <&mdss>;
 				interrupts = <13>;
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_AUX1_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK1_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK1_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>;
-				assigned-clock-parents = <&usb_sec_dpphy 0>, <&usb_sec_dpphy 1>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+							 <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
-				phys = <&usb_sec_dpphy>;
+				phys = <&usb_sec_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				#sound-dai-cells = <0>;
@@ -3096,7 +3412,8 @@
 				reg = <0 0xae9a000 0 0x200>,
 				      <0 0xae9a200 0 0x200>,
 				      <0 0xae9a400 0 0x600>,
-				      <0 0xae9aa00 0 0x400>;
+				      <0 0xae9aa00 0 0x400>,
+				      <0 0xae9b000 0 0x400>;
 				interrupt-parent = <&mdss>;
 				interrupts = <14>;
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -3117,8 +3434,6 @@
 				phys = <&edp_phy>;
 				phy-names = "dp";
 
-				#sound-dai-cells = <0>;
-
 				operating-points-v2 = <&edp_opp_table>;
 				power-domains = <&rpmhpd SC8180X_MMCX>;
 
@@ -3134,6 +3449,13 @@
 							remote-endpoint = <&dpu_intf5_out>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_edp_out: endpoint {
+						};
+					};
 				};
 
 				edp_opp_table: opp-table {
@@ -3173,7 +3495,7 @@
 				 <&dispcc DISP_CC_MDSS_AHB_CLK>;
 			clock-names = "aux", "cfg_ahb";
 
-			power-domains = <&dispcc MDSS_GDSC>;
+			power-domains = <&rpmhpd SC8180X_MX>;
 
 			#clock-cells = <1>;
 			#phy-cells = <0>;
@@ -3183,22 +3505,29 @@
 			compatible = "qcom,sc8180x-dispcc";
 			reg = <0 0x0af00000 0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&sleep_clk>,
-				 <&usb_prim_dpphy 0>,
-				 <&usb_prim_dpphy 1>,
-				 <&usb_sec_dpphy 0>,
-				 <&usb_sec_dpphy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&edp_phy 0>,
-				 <&edp_phy 1>;
+				 <&edp_phy 1>,
+				 <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
-				      "sleep_clk",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
 				      "dp_phy_pll_link_clk",
 				      "dp_phy_pll_vco_div_clk",
-				      "dptx1_phy_pll_link_clk",
-				      "dptx1_phy_pll_vco_div_clk",
 				      "edp_phy_pll_link_clk",
-				      "edp_phy_pll_vco_div_clk";
+				      "edp_phy_pll_vco_div_clk",
+				      "dptx1_phy_pll_link_clk",
+				      "dptx1_phy_pll_vco_div_clk";
 			power-domains = <&rpmhpd SC8180X_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -3235,14 +3564,18 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp";
-			reg = <0x0 0x0c300000 0x0 0x100000>;
+			reg = <0x0 0x0c300000 0x0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
 			mboxes = <&apss_shared 0>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -3375,7 +3708,7 @@
 				     <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>;
-
+			dma-coherent;
 		};
 
 		remoteproc_adsp: remoteproc@17300000 {
@@ -3414,14 +3747,17 @@
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
 		};
 
 		apss_shared: mailbox@17c00000 {
-			compatible = "qcom,sc8180x-apss-shared";
+			compatible = "qcom,sc8180x-apss-shared", "qcom,sdm845-apss-shared";
 			reg = <0x0 0x17c00000 0x0 0x1000>;
 			#mbox-cells = <1>;
 		};
@@ -3501,7 +3837,7 @@
 					  <WAKE_TCS    1>,
 					  <CONTROL_TCS 0>;
 			label = "apps_rsc";
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
@@ -3579,7 +3915,7 @@
 			compatible = "qcom,sc8180x-lmh";
 			reg = <0 0x18350800 0 0x400>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			cpus = <&CPU4>;
+			cpus = <&cpu4>;
 			qcom,lmh-temp-arm-millicelsius = <65000>;
 			qcom,lmh-temp-low-millicelsius = <94500>;
 			qcom,lmh-temp-high-millicelsius = <95000>;
@@ -3591,7 +3927,7 @@
 			compatible = "qcom,sc8180x-lmh";
 			reg = <0 0x18358800 0 0x400>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			cpus = <&CPU0>;
+			cpus = <&cpu0>;
 			qcom,lmh-temp-arm-millicelsius = <65000>;
 			qcom,lmh-temp-low-millicelsius = <94500>;
 			qcom,lmh-temp-high-millicelsius = <95000>;
@@ -3600,7 +3936,7 @@
 		};
 
 		cpufreq_hw: cpufreq@18323000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sc8180x-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
 			reg-names = "freq-domain0", "freq-domain1";
 
@@ -3638,7 +3974,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -3653,7 +3988,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -3668,7 +4002,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -3683,7 +4016,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -3698,7 +4030,6 @@
 
 		cpu4-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -3713,7 +4044,6 @@
 
 		cpu5-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -3728,7 +4058,6 @@
 
 		cpu6-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -3743,7 +4072,6 @@
 
 		cpu7-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -3758,7 +4086,6 @@
 
 		cpu4-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -3773,7 +4100,6 @@
 
 		cpu5-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -3788,7 +4114,6 @@
 
 		cpu6-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -3803,7 +4128,6 @@
 
 		cpu7-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -3818,7 +4142,6 @@
 
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -3833,7 +4156,6 @@
 
 		cluster0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -3848,7 +4170,6 @@
 
 		cluster1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -3863,22 +4184,39 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 15>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -3893,7 +4231,6 @@
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -3908,7 +4245,6 @@
 
 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -3923,7 +4259,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -3938,7 +4273,6 @@
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -3953,7 +4287,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -3968,7 +4301,6 @@
 
 		compute-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -3983,7 +4315,6 @@
 
 		mdm-dsp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -3998,7 +4329,6 @@
 
 		npu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 8>;
 
@@ -4013,16 +4343,34 @@
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 11>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index e4861c61a65b..490e970c54a2 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -20,6 +20,7 @@
 		i2c4 = &i2c4;
 		i2c21 = &i2c21;
 		serial0 = &uart17;
+		serial1 = &uart2;
 	};
 
 	backlight: backlight {
@@ -36,6 +37,20 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&kypd_vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "volume_up";
+			gpios = <&pmc8280_1_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+	};
+
 	pmic-glink {
 		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
 
@@ -56,7 +71,7 @@
 					reg = <0>;
 
 					pmic_glink_con0_hs: endpoint {
-						remote-endpoint = <&usb_0_role_switch>;
+						remote-endpoint = <&usb_0_dwc3_hs>;
 					};
 				};
 
@@ -91,7 +106,7 @@
 					reg = <0>;
 
 					pmic_glink_con1_hs: endpoint {
-						remote-endpoint = <&usb_1_role_switch>;
+						remote-endpoint = <&usb_1_dwc3_hs>;
 					};
 				};
 
@@ -260,6 +275,70 @@
 			};
 		};
 	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-0 = <&bt_en>, <&wlan_en>;
+		pinctrl-names = "default";
+
+		wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s10b>;
+		vddaon-supply = <&vreg_s12b>;
+		vddpmu-supply = <&vreg_s12b>;
+		vddpmumx-supply = <&vreg_s12b>;
+		vddpmucx-supply = <&vreg_s12b>;
+		vddrfa0p95-supply = <&vreg_s12b>;
+		vddrfa1p3-supply = <&vreg_s11b>;
+		vddrfa1p9-supply = <&vreg_s1c>;
+		vddpcie1p3-supply = <&vreg_s11b>;
+		vddpcie1p9-supply = <&vreg_s1c>;
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -269,6 +348,15 @@
 
 		vdd-l3-l5-supply = <&vreg_s11b>;
 
+		vreg_s10b: smps10 {
+			regulator-name = "vreg_s10b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
 		vreg_s11b: smps11 {
 			regulator-name = "vreg_s11b";
 			regulator-min-microvolt = <1272000>;
@@ -276,6 +364,13 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_s12b: smps12 {
+			regulator-name = "vreg_s12b";
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l3b: ldo3 {
 			regulator-name = "vreg_l3b";
 			regulator-min-microvolt = <1200000>;
@@ -304,6 +399,13 @@
 		compatible = "qcom,pm8350c-rpmh-regulators";
 		qcom,pmic-id = "c";
 
+		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
+			regulator-min-microvolt = <1888000>;
+			regulator-max-microvolt = <1888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l1c: ldo1 {
 			regulator-name = "vreg_l1c";
 			regulator-min-microvolt = <1800000>;
@@ -393,6 +495,18 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 
@@ -446,18 +560,15 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss0_dp3_out: endpoint {
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+&mdss0_dp3_out {
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
+
 	vdda-phy-supply = <&vreg_l6b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
@@ -561,6 +672,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 
@@ -579,6 +692,25 @@
 	status = "okay";
 };
 
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
+		qcom,calibration-variant = "QC_8280XP_CRD";
+	};
+};
+
 &pmc8280c_lpg {
 	status = "okay";
 };
@@ -626,6 +758,12 @@
 	status = "okay";
 };
 
+&remoteproc_slpi {
+	firmware-name = "qcom/sc8280xp/qcslpi8280.mbn";
+
+	status = "okay";
+};
+
 &sdc2 {
 	pinctrl-0 = <&sdc2_default_state>;
 	pinctrl-1 = <&sdc2_sleep_state>;
@@ -639,6 +777,26 @@
 	status = "okay";
 };
 
+&uart2 {
+	pinctrl-0 = <&uart2_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+	};
+};
+
 &uart17 {
 	compatible = "qcom,geni-debug-uart";
 
@@ -671,6 +829,10 @@
 	dr_mode = "host";
 };
 
+&usb_0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_0_hsphy {
 	vdda-pll-supply = <&vreg_l9d>;
 	vdda18-supply = <&vreg_l1c>;
@@ -696,10 +858,6 @@
 	remote-endpoint = <&pmic_glink_con0_ss>;
 };
 
-&usb_0_role_switch {
-	remote-endpoint = <&pmic_glink_con0_hs>;
-};
-
 &usb_1 {
 	status = "okay";
 };
@@ -708,6 +866,10 @@
 	dr_mode = "host";
 };
 
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &usb_1_hsphy {
 	vdda-pll-supply = <&vreg_l4b>;
 	vdda18-supply = <&vreg_l1c>;
@@ -733,10 +895,6 @@
 	remote-endpoint = <&pmic_glink_con1_ss>;
 };
 
-&usb_1_role_switch {
-	remote-endpoint = <&pmic_glink_con1_hs>;
-};
-
 &xo_board_clk {
 	clock-frequency = <38400000>;
 };
@@ -754,6 +912,14 @@
 		function = "normal";
 	};
 
+	kypd_vol_up_n: kypd-vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <0>; /* 3.3 V */
+		bias-pull-up;
+		input-enable;
+	};
+
 	misc_3p3_reg_en: misc-3p3-reg-en-state {
 		pins = "gpio2";
 		function = "normal";
@@ -784,6 +950,13 @@
 &tlmm {
 	gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
 
+	bt_en: bt-en-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio25";
 		function = "gpio";
@@ -844,15 +1017,15 @@
 			pins = "gpio143";
 			function = "gpio";
 			drive-strength = <2>;
-			bias-pull-down;
+			bias-disable;
 		};
 
 		wake-n-pins {
-		       pins = "gpio145";
-		       function = "gpio";
-		       drive-strength = <2>;
-		       bias-pull-up;
-	       };
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
 	};
 
 	pcie3a_default: pcie3a-default-state {
@@ -867,7 +1040,7 @@
 			pins = "gpio151";
 			function = "gpio";
 			drive-strength = <2>;
-			bias-pull-down;
+			bias-disable;
 		};
 
 		wake-n-pins {
@@ -890,7 +1063,7 @@
 			pins = "gpio141";
 			function = "gpio";
 			drive-strength = <2>;
-			bias-pull-down;
+			bias-disable;
 		};
 
 		wake-n-pins {
@@ -973,8 +1146,35 @@
 		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
-			output-high;
-			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	uart2_default: uart2-default-state {
+		cts-pins {
+			pins = "gpio121";
+			function = "qup2";
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio122";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio124";
+			function = "qup2";
+			bias-pull-up;
+		};
+
+		tx-pins {
+			pins = "gpio123";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
@@ -1027,4 +1227,11 @@
 			output-high;
 		};
 	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio134";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso b/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso
new file mode 100644
index 000000000000..25d1fa4bc205
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * sc8280xp specific modifications required to boot in EL2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */
+&gpu {
+	zap-shader {
+		status = "disabled";
+	};
+};
+
+/*
+ * When running under QHEE, this IOMMU is controlled by the firmware,
+ * however when we take ownership of it in EL2, we need to configure
+ * it properly to use PCIe.
+ */
+&pcie2a {
+	iommu-map = <0 &pcie_smmu 0x20000 0x10000>;
+};
+
+&pcie2b {
+	iommu-map = <0 &pcie_smmu 0x30000 0x10000>;
+};
+
+&pcie3a {
+	iommu-map = <0 &pcie_smmu 0x40000 0x10000>;
+};
+
+&pcie3b {
+	iommu-map = <0 &pcie_smmu 0x50000 0x10000>;
+};
+
+&pcie4 {
+	iommu-map = <0 &pcie_smmu 0x60000 0x10000>;
+};
+
+&pcie_smmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
new file mode 100644
index 000000000000..0374251d3329
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
@@ -0,0 +1,1493 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ *
+ * Copyright (c) 2024, Tianyu Gao <gty0622@gmail.com>
+ * Copyright (c) 2024, Xuecong Chen <chenxuecong2009@outlook.com>
+ *
+ * Copyright (c) 2024, Pengyu Luo <mitltlatltl@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+	chassis-type = "tablet";
+	model = "Matebook E Go";
+	compatible = "huawei,gaokun3", "qcom,sc8280xp";
+
+	aliases {
+		i2c4 = &i2c4;
+		i2c15 = &i2c15;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@c6200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xc6200000 0x0 0x02400000>;
+			width = <1600>;
+			height = <2560>;
+			stride = <(1600 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9380-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_s10b>;
+		vdd-rxtx-supply = <&vreg_s10b>;
+		vdd-io-supply = <&vreg_s10b>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&mode_pin_active>, <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pmc8280_1_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		switch-mode {
+			label = "Tablet Mode Switch";
+			gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&misc_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VPH_VCC3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		regulator-always-on;
+	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_WLAN_3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&hastings_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		gpu_mem: gpu-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x2000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	thermal-zones {
+		skin-temp-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&pmk8280_adc_tm 5>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <55000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <73000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb0_sbu_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&ucsi0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb1_sbu_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&ucsi1_sbu>;
+			};
+		};
+	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_default>, <&wlan_en>;
+
+		wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s10b>;
+		vddaon-supply = <&vreg_s12b>;
+		vddpmu-supply = <&vreg_s12b>;
+		vddpmumx-supply = <&vreg_s12b>;
+		vddpmucx-supply = <&vreg_s12b>;
+		vddrfa0p95-supply = <&vreg_s12b>;
+		vddrfa1p3-supply = <&vreg_s11b>;
+		vddrfa1p9-supply = <&vreg_s1c>;
+		vddpcie1p3-supply = <&vreg_s11b>;
+		vddpcie1p9-supply = <&vreg_s1c>;
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-l1-l4-supply = <&vreg_s12b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_s10b: smps10 {
+			regulator-name = "vreg_s10b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s11b: smps11 {
+			regulator-name = "vreg_s11b";
+			regulator-min-microvolt = <1272000>;
+			regulator-max-microvolt = <1272000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s12b: smps12 {
+			regulator-name = "vreg_s12b";
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b: ldo1 {
+			regulator-name = "vreg_l1b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b: ldo2 {
+			regulator-name = "vreg_l2b";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b: ldo4 {
+			regulator-name = "vreg_l4b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b: ldo5 {
+			regulator-name = "vreg_l5b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b: ldo7 {
+			regulator-name = "vreg_l7b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+
+		vreg_l9b: ldo9 {
+			regulator-name = "vreg_l9b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-bob-supply = <&vreg_vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1c>;
+		vdd-l2-l8-supply = <&vreg_s1c>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s11b>;
+
+		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c: ldo12 {
+			regulator-name = "vreg_l12c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-always-on;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-l4-supply = <&vreg_s11b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_l2d: ldo2 {
+			regulator-name = "vreg_l2d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d: ldo3 {
+			regulator-name = "vreg_l3d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4d: ldo4 {
+			regulator-name = "vreg_l4d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6d: ldo6 {
+			regulator-name = "vreg_l6d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7d: ldo7 {
+			regulator-name = "vreg_l7d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8d: ldo8 {
+			regulator-name = "vreg_l8d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9d: ldo9 {
+			regulator-name = "vreg_l9d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10d: ldo10 {
+			regulator-name = "vreg_l10d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc0 {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcdxkmsuc8280.mbn";
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&i2c4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	touchscreen@4f {
+		compatible = "hid-over-i2c";
+		reg = <0x4f>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_s10b>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+
+};
+
+&i2c15 {
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&i2c15_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	embedded-controller@38 {
+		compatible = "huawei,gaokun3-ec";
+		reg = <0x38>;
+
+		interrupts-extended = <&tlmm 107 IRQ_TYPE_LEVEL_LOW>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ucsi0_hs_in: endpoint {
+						remote-endpoint = <&usb_0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ucsi0_ss_in: endpoint {
+						remote-endpoint = <&usb_0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					ucsi0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ucsi1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ucsi1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					ucsi1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie2a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	max-link-speed = <2>;
+
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+	};
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pmk8280_adc_tm {
+	status = "okay";
+
+	sys-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@7 {
+		reg = <7>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+};
+
+&pmk8280_pon_pwrkey {
+	status = "okay";
+};
+
+&pmk8280_pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmk8280_sdam_6 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
+&pmk8280_vadc {
+	channel@144 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm1";
+	};
+
+	channel@145 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm2";
+	};
+
+	channel@146 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm3";
+	};
+
+	channel@147 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm4";
+	};
+
+	channel@344 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm5";
+	};
+
+	channel@345 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm6";
+	};
+
+	channel@346 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm7";
+	};
+
+	channel@347 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm8";
+	};
+};
+
+&qup0 {
+	status = "okay";
+};
+
+&qup1 {
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcadsp8280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qccdsp8280.mbn";
+
+	status = "okay";
+};
+
+&rxmacro {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sc8280xp-sndcard";
+	model = "SC8280XP-HUAWEI-MATEBOOKEGO";
+	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+			"SpkrRight IN", "WSA_SPK2 OUT",
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS1",
+			"VA DMIC1", "MIC BIAS1",
+			"VA DMIC2", "MIC BIAS3",
+			"VA DMIC0", "VA MIC BIAS1",
+			"VA DMIC1", "VA MIC BIAS1",
+			"VA DMIC2", "VA MIC BIAS3",
+			"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	left_spkr: wsa8830-left@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_1_sd_n_default>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+
+	right_spkr: wsa8830-right@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		pinctrl-0 = <&spkr_2_sd_n_default>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: wcd9380-rx@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: wcd9380-tx@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&txmacro {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_dwc3_hs {
+	remote-endpoint = <&ucsi0_hs_in>;
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l9d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l9d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_0_qmpphy_out {
+	remote-endpoint = <&ucsi0_ss_in>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&ucsi1_hs_in>;
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l4b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l13c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&ucsi1_ss_in>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l1b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy1 {
+	vdda-pll-supply = <&vreg_l8d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy2 {
+	vdda-pll-supply = <&vreg_l10d>;
+	vdda18-supply = <&vreg_l8c>;
+	vdda33-supply = <&vreg_l2d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy3 {
+	vdda-pll-supply = <&vreg_l10d>;
+	vdda18-supply = <&vreg_l8c>;
+	vdda33-supply = <&vreg_l2d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l1b>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy1 {
+	vdda-phy-supply = <&vreg_l8d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_s10b>;
+
+	qcom,dmic-sample-rate = <4800000>;
+
+	status = "okay";
+};
+
+&wsamacro {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&lpass_tlmm {
+	status = "okay";
+};
+
+&pmc8280_1_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&tlmm {
+
+	gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 4>;
+
+	bt_default: bt-default-state {
+		hstp-bt-en-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		hstp-sw-ctrl-pins {
+			pins = "gpio132";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	i2c4_default: i2c4-default-state {
+		pins = "gpio171", "gpio172";
+		function = "qup4";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c15_default: i2c15-default-state {
+		pins = "gpio36", "gpio37";
+		function = "qup15";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	mode_pin_active: mode-pin-state {
+		pins = "gpio26";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+		       pins = "gpio145";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	spkr_1_sd_n_default: spkr-1-sd-n-default-state {
+		perst-n-pins {
+			pins = "gpio178";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spkr_2_sd_n_default: spkr-2-sd-n-default-state {
+		perst-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio175";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	uart2_default: uart2-default-state {
+		cts-pins {
+			pins = "gpio121";
+			function = "qup2";
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio122";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio124";
+			function = "qup2";
+			bias-pull-up;
+		};
+
+		tx-pins {
+			pins = "gpio123";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		pins = "gpio164";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		pins = "gpio47";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-default-state {
+		reset-pins {
+			pins = "gpio106";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio134";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 38edaf51aa34..637430719e6d 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -6,10 +6,8 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
-#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
-#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -82,6 +80,9 @@
 	leds {
 		compatible = "gpio-leds";
 
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_indicator_en>;
+
 		led-camera-indicator {
 			label = "white:camera-indicator";
 			function = LED_FUNCTION_INDICATOR;
@@ -99,6 +100,8 @@
 
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 49 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";
@@ -114,7 +117,7 @@
 					reg = <0>;
 
 					pmic_glink_con0_hs: endpoint {
-						remote-endpoint = <&usb_0_role_switch>;
+						remote-endpoint = <&usb_0_dwc3_hs>;
 					};
 				};
 
@@ -149,7 +152,7 @@
 					reg = <0>;
 
 					pmic_glink_con1_hs: endpoint {
-						remote-endpoint = <&usb_1_role_switch>;
+						remote-endpoint = <&usb_1_dwc3_hs>;
 					};
 				};
 
@@ -294,9 +297,30 @@
 	};
 
 	thermal-zones {
+		pm8008-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8008>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
 		skin-temp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8280_adc_tm 5>;
 
 			trips {
@@ -322,18 +346,18 @@
 			cooling-maps {
 				map0 {
 					trip = <&skin_temp_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 
 				map1 {
 					trip = <&skin_temp_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -376,6 +400,70 @@
 			};
 		};
 	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-0 = <&bt_default>, <&wlan_en>;
+		pinctrl-names = "default";
+
+		wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s10b>;
+		vddaon-supply = <&vreg_s12b>;
+		vddpmu-supply = <&vreg_s12b>;
+		vddpmumx-supply = <&vreg_s12b>;
+		vddpmucx-supply = <&vreg_s12b>;
+		vddrfa0p95-supply = <&vreg_s12b>;
+		vddrfa1p3-supply = <&vreg_s11b>;
+		vddrfa1p9-supply = <&vreg_s1c>;
+		vddpcie1p3-supply = <&vreg_s11b>;
+		vddpcie1p9-supply = <&vreg_s1c>;
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -402,7 +490,6 @@
 			regulator-min-microvolt = <1272000>;
 			regulator-max-microvolt = <1272000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-always-on;
 		};
 
 		vreg_s12b: smps12 {
@@ -410,7 +497,13 @@
 			regulator-min-microvolt = <984000>;
 			regulator-max-microvolt = <984000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-always-on;
+		};
+
+		vreg_l1b: ldo1 {
+			regulator-name = "vreg_l1b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l3b: ldo3 {
@@ -463,6 +556,13 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l12c: ldo12 {
 			regulator-name = "vreg_l12c";
 			regulator-min-microvolt = <1800000>;
@@ -496,6 +596,13 @@
 		vdd-l6-l9-l10-supply = <&vreg_s12b>;
 		vdd-l8-supply = <&vreg_s12b>;
 
+		vreg_l2d: ldo2 {
+			regulator-name = "vreg_l2d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l3d: ldo3 {
 			regulator-name = "vreg_l3d";
 			regulator-min-microvolt = <1200000>;
@@ -524,12 +631,76 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l8d: ldo8 {
+			regulator-name = "vreg_l8d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l9d: ldo9 {
 			regulator-name = "vreg_l9d";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_l10d: ldo10 {
+			regulator-name = "vreg_l10d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&camss {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+
+	ports {
+		port@0 {
+			csiphy0_lanes01_ep: endpoint@0 {
+				reg = <0>;
+				clock-lanes = <7>;
+				data-lanes = <0 1>;
+				remote-endpoint = <&ov5675_ep>;
+			};
+		};
+	};
+};
+
+&cci2 {
+	status = "okay";
+};
+
+&cci2_i2c1 {
+	camera@10 {
+		compatible = "ovti,ov5675";
+		reg = <0x10>;
+
+		reset-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_rgb_default>;
+
+		clocks = <&camcc CAMCC_MCLK3_CLK>;
+
+		orientation = <0>;	/* Front facing */
+
+		avdd-supply = <&vreg_l6q>;
+		dvdd-supply = <&vreg_l2q>;
+		dovdd-supply = <&vreg_l7q>;
+
+		port {
+			ov5675_ep: endpoint {
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <450000000>;
+				remote-endpoint = <&csiphy0_lanes01_ep>;
+			};
+		};
+
 	};
 };
 
@@ -537,6 +708,18 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 
@@ -555,7 +738,7 @@
 };
 
 &mdss0_dp0_out {
-	data-lanes = <0 1>;
+	data-lanes = <0 1 2 3>;
 	remote-endpoint = <&usb_0_qmpphy_dp_in>;
 };
 
@@ -564,12 +747,13 @@
 };
 
 &mdss0_dp1_out {
-	data-lanes = <0 1>;
+	data-lanes = <0 1 2 3>;
 	remote-endpoint = <&usb_1_qmpphy_dp_in>;
 };
 
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
+	/delete-property/ #sound-dai-cells;
 
 	data-lanes = <0 1 2 3>;
 
@@ -589,18 +773,14 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss0_dp3_out: endpoint {
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+&mdss0_dp3_out {
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
 	vdda-phy-supply = <&vreg_l6b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
@@ -615,21 +795,101 @@
 
 	status = "okay";
 
-	/* FIXME: verify */
 	touchscreen@10 {
-		compatible = "hid-over-i2c";
+		compatible = "elan,ekth5015m", "elan,ekth6915";
 		reg = <0x10>;
 
-		hid-descr-addr = <0x1>;
 		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_s10b>;
+		reset-gpios = <&tlmm 99 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		no-reset-on-power-off;
+
+		vcc33-supply = <&vreg_misc_3p3>;
+		vccio-supply = <&vreg_misc_3p3>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&ts0_default>;
 	};
 };
 
+&i2c11 {
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c11_default>;
+
+	status = "okay";
+
+	pm8008: pmic@c {
+		compatible = "qcom,pm8008";
+		reg = <0xc>;
+
+		interrupts-extended = <&tlmm 41 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
+
+		vdd-l1-l2-supply = <&vreg_s11b>;
+		vdd-l3-l4-supply = <&vreg_bob>;
+		vdd-l5-supply = <&vreg_bob>;
+		vdd-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_bob>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pm8008_default>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pm8008 0 0 2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		#thermal-sensor-cells = <0>;
+
+		regulators {
+			vreg_l1q: ldo1 {
+				regulator-name = "vreg_l1q";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vreg_l2q: ldo2 {
+				regulator-name = "vreg_l2q";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vreg_l3q: ldo3 {
+				regulator-name = "vreg_l3q";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vreg_l4q: ldo4 {
+				regulator-name = "vreg_l4q";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vreg_l5q: ldo5 {
+				regulator-name = "vreg_l5q";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vreg_l6q: ldo6 {
+				regulator-name = "vreg_l6q";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vreg_l7q: ldo7 {
+				regulator-name = "vreg_l7q";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+		};
+	};
+};
+
 &i2c21 {
 	clock-frequency = <400000>;
 
@@ -717,6 +977,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 
@@ -726,22 +988,24 @@
 	pinctrl-0 = <&pcie4_default>;
 
 	status = "okay";
+};
 
-	pcie@0 {
-		device_type = "pci";
-		reg = <0x0 0x0 0x0 0x0 0x0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		bus-range = <0x01 0xff>;
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
 
-		wifi@0 {
-			compatible = "pci17cb,1103";
-			reg = <0x10000 0x0 0x0 0x0 0x0>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
 
-			qcom,ath11k-calibration-variant = "LE_X13S";
-		};
+		qcom,calibration-variant = "LE_X13S";
 	};
 };
 
@@ -833,42 +1097,12 @@
 };
 
 &pmk8280_rtc {
-	nvmem-cells = <&rtc_offset>;
-	nvmem-cell-names = "offset";
+	qcom,uefi-rtc-info;
 
 	status = "okay";
 };
 
-&pmk8280_sdam_6 {
-	status = "okay";
-
-	rtc_offset: rtc-offset@bc {
-		reg = <0xbc 0x4>;
-	};
-};
-
 &pmk8280_vadc {
-	status = "okay";
-
-	channel@3 {
-		reg = <PMK8350_ADC7_DIE_TEMP>;
-		qcom,pre-scaling = <1 1>;
-		label = "pmk8350_die_temp";
-	};
-
-	channel@44 {
-		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
-		qcom,hw-settle-time = <200>;
-		qcom,ratiometric;
-		label = "pmk8350_xo_therm";
-	};
-
-	channel@103 {
-		reg = <PM8350_ADC7_DIE_TEMP(1)>;
-		qcom,pre-scaling = <1 1>;
-		label = "pmc8280_1_die_temp";
-	};
-
 	channel@144 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
@@ -897,12 +1131,6 @@
 		label = "sys_therm4";
 	};
 
-	channel@303 {
-		reg = <PM8350_ADC7_DIE_TEMP(3)>;
-		qcom,pre-scaling = <1 1>;
-		label = "pmc8280_2_die_temp";
-	};
-
 	channel@344 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
@@ -930,12 +1158,6 @@
 		qcom,ratiometric;
 		label = "sys_therm8";
 	};
-
-	channel@403 {
-		reg = <PMR735A_ADC7_DIE_TEMP>;
-		qcom,pre-scaling = <1 1>;
-		label = "pmr735a_die_temp";
-	};
 };
 
 &qup0 {
@@ -962,6 +1184,12 @@
 	status = "okay";
 };
 
+&remoteproc_slpi {
+	firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcslpi8280.mbn";
+
+	status = "okay";
+};
+
 &rxmacro {
 	status = "okay";
 };
@@ -978,9 +1206,6 @@
 		"VA DMIC0", "MIC BIAS1",
 		"VA DMIC1", "MIC BIAS1",
 		"VA DMIC2", "MIC BIAS3",
-		"VA DMIC0", "VA MIC BIAS1",
-		"VA DMIC1", "VA MIC BIAS1",
-		"VA DMIC2", "VA MIC BIAS3",
 		"TX SWR_ADC1", "ADC2_OUTPUT";
 
 	wcd-playback-dai-link {
@@ -1105,20 +1330,16 @@
 	bluetooth {
 		compatible = "qcom,wcn6855-bt";
 
-		vddio-supply = <&vreg_s10b>;
-		vddbtcxmx-supply = <&vreg_s12b>;
-		vddrfacmn-supply = <&vreg_s12b>;
-		vddrfa0p8-supply = <&vreg_s12b>;
-		vddrfa1p2-supply = <&vreg_s11b>;
-		vddrfa1p7-supply = <&vreg_s1c>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
 
 		max-speed = <3200000>;
-
-		enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
-		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-0 = <&bt_default>;
-		pinctrl-names = "default";
 	};
 };
 
@@ -1130,6 +1351,10 @@
 	dr_mode = "host";
 };
 
+&usb_0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_0_hsphy {
 	vdda-pll-supply = <&vreg_l9d>;
 	vdda18-supply = <&vreg_l1c>;
@@ -1142,6 +1367,7 @@
 	vdda-phy-supply = <&vreg_l9d>;
 	vdda-pll-supply = <&vreg_l4d>;
 
+	mode-switch;
 	orientation-switch;
 
 	status = "okay";
@@ -1155,10 +1381,6 @@
 	remote-endpoint = <&pmic_glink_con0_ss>;
 };
 
-&usb_0_role_switch {
-	remote-endpoint = <&pmic_glink_con0_hs>;
-};
-
 &usb_1 {
 	status = "okay";
 };
@@ -1167,6 +1389,10 @@
 	dr_mode = "host";
 };
 
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &usb_1_hsphy {
 	vdda-pll-supply = <&vreg_l4b>;
 	vdda18-supply = <&vreg_l1c>;
@@ -1179,6 +1405,7 @@
 	vdda-phy-supply = <&vreg_l4b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
+	mode-switch;
 	orientation-switch;
 
 	status = "okay";
@@ -1192,12 +1419,58 @@
 	remote-endpoint = <&pmic_glink_con1_ss>;
 };
 
-&usb_1_role_switch {
-	remote-endpoint = <&pmic_glink_con1_hs>;
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l1b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy1 {
+	vdda-pll-supply = <&vreg_l8d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy2 {
+	vdda-pll-supply = <&vreg_l10d>;
+	vdda18-supply = <&vreg_l8c>;
+	vdda33-supply = <&vreg_l2d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy3 {
+	vdda-pll-supply = <&vreg_l10d>;
+	vdda18-supply = <&vreg_l8c>;
+	vdda33-supply = <&vreg_l2d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l1b>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy1 {
+	vdda-phy-supply = <&vreg_l8d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
 };
 
 &vamacro {
-	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 	pinctrl-names = "default";
 
 	vdd-micb-supply = <&vreg_s10b>;
@@ -1277,6 +1550,29 @@
 		};
 	};
 
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio28";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	cam_rgb_default: cam-rgb-default-state {
+		mclk-pins {
+			pins = "gpio17";
+			function = "cam_mclk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sc-rgb-xshut-n-pins {
+			pins = "gpio15";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio25";
 		function = "gpio";
@@ -1297,6 +1593,13 @@
 		bias-disable;
 	};
 
+	i2c11_default: i2c11-default-state {
+		pins = "gpio18", "gpio19";
+		function = "qup11";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
 	i2c21_default: i2c21-default-state {
 		pins = "gpio81", "gpio82";
 		function = "qup21";
@@ -1343,15 +1646,15 @@
 			pins = "gpio143";
 			function = "gpio";
 			drive-strength = <2>;
-			bias-pull-down;
+			bias-disable;
 		};
 
 		wake-n-pins {
-		       pins = "gpio145";
-		       function = "gpio";
-		       drive-strength = <2>;
-		       bias-pull-up;
-	       };
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
 	};
 
 	pcie3a_default: pcie3a-default-state {
@@ -1366,7 +1669,7 @@
 			pins = "gpio151";
 			function = "gpio";
 			drive-strength = <2>;
-			bias-pull-down;
+			bias-disable;
 		};
 
 		wake-n-pins {
@@ -1389,7 +1692,7 @@
 			pins = "gpio141";
 			function = "gpio";
 			drive-strength = <2>;
-			bias-pull-down;
+			bias-disable;
 		};
 
 		wake-n-pins {
@@ -1400,6 +1703,22 @@
 		};
 	};
 
+	pm8008_default: pm8008-default-state {
+		int-pins {
+			pins = "gpio41";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		reset-n-pins {
+			pins = "gpio42";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	spkr_1_sd_n_default: spkr-1-sd-n-default-state {
 		perst-n-pins {
 			pins = "gpio178";
@@ -1438,8 +1757,8 @@
 		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
-			output-high;
-			drive-strength = <16>;
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
@@ -1512,4 +1831,11 @@
 			bias-disable;
 		};
 	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio134";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
new file mode 100644
index 000000000000..aeed3ef152eb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
@@ -0,0 +1,1044 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Jérôme de Bretagne <jerome.debretagne@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+	model = "Microsoft Surface Pro 9 5G";
+	compatible = "microsoft,arcata", "qcom,sc8280xp";
+
+	aliases {
+		serial0 = &uart18;
+		serial1 = &uart2;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9380-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_s10b>;
+		vdd-rxtx-supply = <&vreg_s10b>;
+		vdd-io-supply = <&vreg_s10b>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Left-side top port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&usb_0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		/* Left-side bottom port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VPH_VCC3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		regulator-always-on;
+	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_WLAN_3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&hastings_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		gpu_mem: gpu-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x2000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	thermal-zones {
+		skin-temp-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&pmk8280_adc_tm 5>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <55000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <73000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb0_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb1_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-l1-l4-supply = <&vreg_s12b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_s10b: smps10 {
+			regulator-name = "vreg_s10b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s11b: smps11 {
+			regulator-name = "vreg_s11b";
+			regulator-min-microvolt = <1272000>;
+			regulator-max-microvolt = <1272000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s12b: smps12 {
+			regulator-name = "vreg_s12b";
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+
+		vreg_l4b: ldo4 {
+			regulator-name = "vreg_l4b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+			regulator-always-on;	// FIXME: VDD_A_EDP_0_0P9
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-bob-supply = <&vreg_vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1c>;
+		vdd-l2-l8-supply = <&vreg_s1c>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s11b>;
+
+		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c: ldo12 {
+			regulator-name = "vreg_l12c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-always-on;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-l4-supply = <&vreg_s11b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_l3d: ldo3 {
+			regulator-name = "vreg_l3d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4d: ldo4 {
+			regulator-name = "vreg_l4d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6d: ldo6 {
+			regulator-name = "vreg_l6d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7d: ldo7 {
+			regulator-name = "vreg_l7d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9d: ldo9 {
+			regulator-name = "vreg_l9d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc0 {
+	status = "okay";
+};
+
+&dispcc1 {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcdxkmsuc8280.mbn";
+	};
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie2a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-0 = <&pcie3a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	max-link-speed = <2>;
+
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		qcom,calibration-variant = "MS_SP9_5G";
+	};
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pmk8280_pon_pwrkey {
+	status = "okay";
+};
+
+&pmk8280_pon_resin {
+	status = "okay";
+};
+
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmk8280_sdam_6 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
+&qup0 {
+	status = "okay";
+};
+
+&qup1 {
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcadsp8280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qccdsp8280.mbn";
+
+	status = "okay";
+};
+
+&rxmacro {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sc8280xp-sndcard";
+	model = "SC8280XP-MICROSOFT-SURFACE-PRO-9-5G";
+	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+			"SpkrRight IN", "WSA_SPK2 OUT",
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS1",
+			"VA DMIC1", "MIC BIAS1",
+			"VA DMIC2", "MIC BIAS3",
+			"VA DMIC0", "VA MIC BIAS1",
+			"VA DMIC1", "VA MIC BIAS1",
+			"VA DMIC2", "VA MIC BIAS3",
+			"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&txmacro {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+
+		vddio-supply = <&vreg_s10b>;
+		vddbtcxmx-supply = <&vreg_s12b>;
+		vddrfacmn-supply = <&vreg_s12b>;
+		vddrfa0p8-supply = <&vreg_s12b>;
+		vddrfa1p2-supply = <&vreg_s11b>;
+		vddrfa1p7-supply = <&vreg_s1c>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart18 {
+	status = "okay";
+
+	embedded-controller {
+		compatible = "microsoft,surface-sam";
+
+		interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_RISING>;
+
+		current-speed = <4000000>;
+
+		pinctrl-0 = <&ssam_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l9d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l9d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l4b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l13c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_s10b>;
+
+	qcom,dmic-sample-rate = <4800000>;
+
+	status = "okay";
+};
+
+&wsamacro {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&lpass_tlmm {
+	status = "okay";
+};
+
+&pmc8280_2_gpios {
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&tlmm {
+	bt_default: bt-default-state {
+		hstp-bt-en-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		hstp-sw-ctrl-pins {
+			pins = "gpio132";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+	       };
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+
+	ssam_state: ssam-state-state {
+		pins = "gpio85";
+		function = "gpio";
+		bias-disable;
+	};
+
+	uart2_default: uart2-default-state {
+		cts-pins {
+			pins = "gpio121";
+			function = "qup2";
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio122";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio124";
+			function = "qup2";
+			bias-pull-up;
+		};
+
+		tx-pins {
+			pins = "gpio123";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	wcd_default: wcd-default-state {
+		reset-pins {
+			pins = "gpio106";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
new file mode 100644
index 000000000000..a40dccd70dfd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
@@ -0,0 +1,1332 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ * Copyright (c) 2023, Merck Hung <merckhung@gmail.com>
+ * Copyright (c) 2023, 2024 Jens Glathe <jens.glathe@oldschoolsolutions.biz>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+	model = "Windows Dev Kit 2023";
+	compatible = "microsoft,blackrock", "qcom,sc8280xp";
+	chassis-type = "desktop";
+
+	aliases {
+		i2c4 = &i2c4;
+		i2c21 = &i2c21;
+		serial1 = &uart2;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9380-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_s10b>;
+		vdd-rxtx-supply = <&vreg_s10b>;
+		vdd-io-supply = <&vreg_s10b>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	dp3_connector: connector {
+		compatible = "dp-connector";
+		label = "DP-3";
+		type = "mini";
+
+		dp-pwr-supply = <&vreg_misc_3p3>;
+
+		port {
+			dp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp2_out>;
+			};
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+		/* Left-side rear port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "source";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&usb_0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		/* Left-side front port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "source";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&misc_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VPH_VCC3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		regulator-always-on;
+	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_WLAN_3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&hastings_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		gpu_mem: gpu-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x2000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb0_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb1_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-0 = <&bt_default>, <&wlan_en>;
+		pinctrl-names = "default";
+
+		wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s10b>;
+		vddaon-supply = <&vreg_s12b>;
+		vddpmu-supply = <&vreg_s12b>;
+		vddpmumx-supply = <&vreg_s12b>;
+		vddpmucx-supply = <&vreg_s12b>;
+		vddrfa0p95-supply = <&vreg_s12b>;
+		vddrfa1p3-supply = <&vreg_s11b>;
+		vddrfa1p9-supply = <&vreg_s1c>;
+		vddpcie1p3-supply = <&vreg_s11b>;
+		vddpcie1p9-supply = <&vreg_s1c>;
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s10-supply = <&vreg_vph_pwr>;
+		vdd-s11-supply = <&vreg_vph_pwr>;
+		vdd-s12-supply = <&vreg_vph_pwr>;
+		vdd-l1-l4-supply = <&vreg_s12b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_s10b: smps10 {
+			regulator-name = "vreg_s10b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s11b: smps11 {
+			regulator-name = "vreg_s11b";
+			regulator-min-microvolt = <1272000>;
+			regulator-max-microvolt = <1272000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s12b: smps12 {
+			regulator-name = "vreg_s12b";
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b: ldo1 {
+			regulator-name = "vreg_l1b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+
+		vreg_l4b: ldo4 {
+			regulator-name = "vreg_l4b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-bob-supply = <&vreg_vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1c>;
+		vdd-l2-l8-supply = <&vreg_s1c>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s11b>;
+
+		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c: ldo12 {
+			regulator-name = "vreg_l12c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-always-on;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-l4-supply = <&vreg_s11b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_l2d: ldo2 {
+			regulator-name = "vreg_l2d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d: ldo3 {
+			regulator-name = "vreg_l3d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4d: ldo4 {
+			regulator-name = "vreg_l4d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6d: ldo6 {
+			regulator-name = "vreg_l6d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7d: ldo7 {
+			regulator-name = "vreg_l7d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8d: ldo8 {
+			regulator-name = "vreg_l8d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9d: ldo9 {
+			regulator-name = "vreg_l9d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10d: ldo10 {
+			regulator-name = "vreg_l10d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc0 {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8280xp/microsoft/blackrock/qcdxkmsuc8280.mbn";
+	};
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss0_dp2 {
+	compatible = "qcom,sc8280xp-dp";
+
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+};
+
+&mdss0_dp2_out {
+	remote-endpoint = <&dp1_connector_in>;
+};
+
+&mdss0_dp2_phy {
+	compatible = "qcom,sc8280xp-dp-phy";
+
+	vdda-phy-supply = <&vreg_l3b>;
+	vdda-pll-supply = <&vreg_l6b>;
+
+	status = "okay";
+};
+
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie2a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l4d>;
+	vdda-pll-supply = <&vreg_l6d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	max-link-speed = <2>;
+
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
+		qcom,calibration-variant = "MS_Volterra";
+	};
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l4d>;
+	vdda-pll-supply = <&vreg_l6d>;
+
+	status = "okay";
+};
+
+&pmc8280c_lpg {
+	status = "okay";
+};
+
+&pmk8280_adc_tm {
+	status = "okay";
+
+	sys-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@7 {
+		reg = <7>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+};
+
+&pmk8280_pon_pwrkey {
+	status = "okay";
+};
+
+&pmk8280_pon_resin {
+	status = "okay";
+};
+
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmk8280_sdam_6 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
+&pmk8280_vadc {
+	channel@144 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm1";
+	};
+
+	channel@145 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm2";
+	};
+
+	channel@146 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm3";
+	};
+
+	channel@147 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm4";
+	};
+
+	channel@344 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm5";
+	};
+
+	channel@345 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm6";
+	};
+
+	channel@346 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm7";
+	};
+
+	channel@347 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm8";
+	};
+};
+
+&qup0 {
+	status = "okay";
+};
+
+&qup1 {
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sc8280xp/microsoft/blackrock/qcadsp8280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sc8280xp/microsoft/blackrock/qccdsp8280.mbn";
+
+	status = "okay";
+};
+
+&rxmacro {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sc8280xp-sndcard";
+	model = "microsoft/blackrock";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: wcd9380-rx@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: wcd9380-tx@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&txmacro {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l9d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l4d>;
+	vdda-pll-supply = <&vreg_l9d>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l4b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l13c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l3b>;
+	vdda-pll-supply = <&vreg_l4b>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&usb_2 {
+	pinctrl-0 = <&usb2_en_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>;
+	phy-names = "usb2-0", "usb3-0";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l1b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l1b>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_s10b>;
+
+	qcom,dmic-sample-rate = <4800000>;
+
+	status = "okay";
+};
+
+&wsamacro {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&lpass_tlmm {
+	status = "okay";
+};
+
+&pmc8280_1_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio8";
+		function = "normal";
+	};
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio9";
+		function = "normal";
+	};
+};
+
+&pmc8280_2_gpios {
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&pmc8280c_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio8";
+		function = "func1";
+	};
+};
+
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&tlmm {
+	bt_default: bt-default-state {
+		hstp-bt-en-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		hstp-sw-ctrl-pins {
+			pins = "gpio132";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart2_default: uart2-default-state {
+		cts-pins {
+			pins = "gpio121";
+			function = "qup2";
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio122";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio124";
+			function = "qup2";
+			bias-pull-up;
+		};
+
+		tx-pins {
+			pins = "gpio123";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usb2_en_state: usb2-en-state {
+		/* TS3USB221A USB2.0 mux select */
+		pins = "gpio24";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	wcd_default: wcd-default-state {
+		reset-pins {
+			pins = "gpio106";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio134";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index 80ee12ded4f4..307df1d3dcd2 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -3,6 +3,9 @@
  * Copyright (c) 2022, Linaro Limited
  */
 
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
@@ -11,7 +14,7 @@
 	thermal-zones {
 		pm8280_1_thermal: pm8280-1-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm8280_1_temp_alarm>;
 
 			trips {
@@ -29,9 +32,29 @@
 			};
 		};
 
+		pmc8280c_thermal: pmc8280c-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmc8280c_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
 		pm8280_2_thermal: pm8280-2-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm8280_2_temp_alarm>;
 
 			trips {
@@ -48,6 +71,26 @@
 				};
 			};
 		};
+
+		pmr735a_thermal: pmr735a-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmr735a_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
 	};
 };
 
@@ -84,7 +127,37 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
-			status = "disabled";
+
+			channel@3 {
+				reg = <PMK8350_ADC7_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "pmk8350_die_temp";
+			};
+
+			channel@44 {
+				reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "pmk8350_xo_therm";
+			};
+
+			channel@103 {
+				reg = <PM8350_ADC7_DIE_TEMP(1)>;
+				qcom,pre-scaling = <1 1>;
+				label = "pmc8280_1_die_temp";
+			};
+
+			channel@303 {
+				reg = <PM8350_ADC7_DIE_TEMP(3)>;
+				qcom,pre-scaling = <1 1>;
+				label = "pmc8280_2_die_temp";
+			};
+
+			channel@403 {
+				reg = <PMR735A_ADC7_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "pmr735a_die_temp";
+			};
 		};
 
 		pmk8280_adc_tm: adc-tm@3400 {
@@ -126,6 +199,8 @@
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
 			interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(1)>;
+			io-channel-names = "thermal";
 			#thermal-sensor-cells = <0>;
 		};
 
@@ -146,6 +221,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmc8280c_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmc8280c_gpios: gpio@8800 {
 			compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
@@ -177,7 +259,9 @@
 		pm8280_2_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&spmi_bus 0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>;
+			io-channel-names = "thermal";
 			#thermal-sensor-cells = <0>;
 		};
 
@@ -198,6 +282,15 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmr735a_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmk8280_vadc PMR735A_ADC7_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmr735a_gpios: gpio@8800 {
 			compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index cad59af7ccef..279e5e6beae2 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -8,7 +8,9 @@
 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
 #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8280xp.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -43,26 +45,27 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a78c";
 			reg = <0x0 0x0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			capacity-dmips-mhz = <602>;
-			next-level-cache = <&L2_0>;
-			power-domains = <&CPU_PD0>;
+			capacity-dmips-mhz = <981>;
+			dynamic-power-coefficient = <549>;
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -70,192 +73,199 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a78c";
 			reg = <0x0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			capacity-dmips-mhz = <602>;
-			next-level-cache = <&L2_100>;
-			power-domains = <&CPU_PD1>;
+			capacity-dmips-mhz = <981>;
+			dynamic-power-coefficient = <549>;
+			next-level-cache = <&l2_100>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a78c";
 			reg = <0x0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			capacity-dmips-mhz = <602>;
-			next-level-cache = <&L2_200>;
-			power-domains = <&CPU_PD2>;
+			capacity-dmips-mhz = <981>;
+			dynamic-power-coefficient = <549>;
+			next-level-cache = <&l2_200>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a78c";
 			reg = <0x0 0x300>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			capacity-dmips-mhz = <602>;
-			next-level-cache = <&L2_300>;
-			power-domains = <&CPU_PD3>;
+			capacity-dmips-mhz = <981>;
+			dynamic-power-coefficient = <549>;
+			next-level-cache = <&l2_300>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "arm,cortex-x1c";
 			reg = <0x0 0x400>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_400>;
-			power-domains = <&CPU_PD4>;
+			dynamic-power-coefficient = <590>;
+			next-level-cache = <&l2_400>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "arm,cortex-x1c";
 			reg = <0x0 0x500>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_500>;
-			power-domains = <&CPU_PD5>;
+			dynamic-power-coefficient = <590>;
+			next-level-cache = <&l2_500>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "arm,cortex-x1c";
 			reg = <0x0 0x600>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_600>;
-			power-domains = <&CPU_PD6>;
+			dynamic-power-coefficient = <590>;
+			next-level-cache = <&l2_600>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "arm,cortex-x1c";
 			reg = <0x0 0x700>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_700>;
-			power-domains = <&CPU_PD7>;
+			dynamic-power-coefficient = <590>;
+			next-level-cache = <&l2_700>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			#cooling-cells = <2>;
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -263,7 +273,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -273,7 +283,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -285,7 +295,7 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			cluster_sleep_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c344>;
 				entry-latency-us = <3263>;
@@ -299,6 +309,7 @@
 		scm: scm {
 			compatible = "qcom,scm-sc8280xp", "qcom,scm";
 			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			qcom,dload-mode = <&tcsr 0x13000>;
 		};
 	};
 
@@ -583,57 +594,57 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CLUSTER_PD: power-domain-cpu-cluster0 {
+		cluster_pd: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			domain-idle-states = <&cluster_sleep_0>;
 		};
 	};
 
@@ -685,6 +696,11 @@
 			no-map;
 		};
 
+		pil_slpi_mem: slpi-region@88c00000 {
+			reg = <0 0x88c00000 0 0x1500000>;
+			no-map;
+		};
+
 		pil_nsp0_mem: cdsp0-region@8a100000 {
 			reg = <0 0x8a100000 0 0x1e00000>;
 			no-map;
@@ -773,6 +789,30 @@
 		};
 	};
 
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_SLPI
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -861,6 +901,44 @@
 			#mbox-cells = <2>;
 		};
 
+		qfprom: efuse@784000 {
+			compatible = "qcom,sc8280xp-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu-speed-bin@18b {
+				reg = <0x18b 0x1>;
+				bits = <5 3>;
+			};
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0xb6 0x0>;
+
+			status = "disabled";
+		};
+
 		qup2: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x008c0000 0 0x2000>;
@@ -888,6 +966,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -904,6 +988,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -920,6 +1010,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -936,6 +1032,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -966,6 +1068,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -982,6 +1090,30 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				status = "disabled";
+			};
+
+			uart18: serial@888000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00888000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+
+				pinctrl-0 = <&qup_uart18_default>;
+				pinctrl-names = "default";
+
 				status = "disabled";
 			};
 
@@ -998,6 +1130,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1014,6 +1152,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1030,6 +1174,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1046,6 +1196,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1062,6 +1218,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1078,6 +1240,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1094,6 +1262,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1110,6 +1284,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1126,6 +1306,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1142,10 +1328,43 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 		};
 
+		gpi_dma0: dma-controller@900000  {
+			compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00900000 0 0x60000>;
+
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <13>;
+			dma-channel-mask = <0x1fff>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x576 0x0>;
+
+			status = "disabled";
+		};
+
 		qup0: geniqup@9c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x009c0000 0 0x6000>;
@@ -1173,6 +1392,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1181,7 +1406,7 @@
 				reg = <0 0x00980000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1189,6 +1414,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1205,6 +1436,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1213,7 +1450,7 @@
 				reg = <0 0x00984000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1221,6 +1458,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1237,6 +1480,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1245,7 +1494,7 @@
 				reg = <0 0x00988000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1253,6 +1502,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1283,6 +1538,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1291,7 +1552,7 @@
 				reg = <0 0x0098c000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1299,6 +1560,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1315,6 +1582,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1323,7 +1596,7 @@
 				reg = <0 0x00990000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1331,6 +1604,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1347,6 +1626,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1355,7 +1640,7 @@
 				reg = <0 0x00994000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1363,6 +1648,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1379,6 +1670,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1387,7 +1684,7 @@
 				reg = <0 0x00998000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1395,6 +1692,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1411,6 +1714,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1419,7 +1728,7 @@
 				reg = <0 0x0099c000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1427,10 +1736,42 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 		};
 
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x96 0x0>;
+
+			status = "disabled";
+		};
+
 		qup1: geniqup@ac0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x00ac0000 0 0x6000>;
@@ -1458,6 +1799,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1474,6 +1821,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1490,6 +1843,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1506,6 +1865,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1522,6 +1887,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1538,6 +1909,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1554,6 +1931,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1570,6 +1953,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1586,6 +1975,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1602,6 +1997,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1618,6 +2019,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1634,6 +2041,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1650,6 +2063,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1666,6 +2085,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1682,6 +2107,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1698,6 +2129,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 		};
@@ -1730,6 +2167,8 @@
 			linux,pci-domain = <6>;
 			num-lanes = <1>;
 
+			msi-map = <0x0 &its 0xe0000 0x10000>;
+
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
@@ -1738,10 +2177,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
 				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
@@ -1773,11 +2212,22 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_4_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie4_phy>;
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie4_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie4_phy: phy@1c06000 {
@@ -1830,6 +2280,8 @@
 			linux,pci-domain = <5>;
 			num-lanes = <2>;
 
+			msi-map = <0x0 &its 0xd0000 0x10000>;
+
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
@@ -1838,10 +2290,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
 				 <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
@@ -1871,11 +2323,22 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_3B_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie3b_phy>;
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie3b_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie3b_phy: phy@1c0e000 {
@@ -1928,6 +2391,8 @@
 			linux,pci-domain = <4>;
 			num-lanes = <4>;
 
+			msi-map = <0x0 &its 0xc0000 0x10000>;
+
 			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
@@ -1936,10 +2401,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
 				 <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
@@ -1969,11 +2434,22 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_3A_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie3a_phy>;
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie3a_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie3a_phy: phy@1c14000 {
@@ -2029,6 +2505,8 @@
 			linux,pci-domain = <3>;
 			num-lanes = <2>;
 
+			msi-map = <0x0 &its 0xb0000 0x10000>;
+
 			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
@@ -2037,10 +2515,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
 				 <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
@@ -2070,11 +2548,22 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_2B_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie2b_phy>;
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie2b_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie2b_phy: phy@1c1e000 {
@@ -2127,6 +2616,8 @@
 			linux,pci-domain = <2>;
 			num-lanes = <4>;
 
+			msi-map = <0x0 &its 0xa0000 0x10000>;
+
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
@@ -2135,10 +2626,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
 				 <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
@@ -2168,11 +2659,22 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_2A_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie2a_phy>;
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie2a_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie2a_phy: phy@1c24000 {
@@ -2207,7 +2709,7 @@
 			status = "disabled";
 		};
 
-		ufs_mem_hc: ufs@1d84000 {
+		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
@@ -2256,9 +2758,12 @@
 			compatible = "qcom,sc8280xp-qmp-ufs-phy";
 			reg = <0 0x01d87000 0 0x1000>;
 
-			clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-			clock-names = "ref", "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_CARD_CLKREF_CLK>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
@@ -2270,7 +2775,7 @@
 			status = "disabled";
 		};
 
-		ufs_card_hc: ufs@1da4000 {
+		ufs_card_hc: ufshc@1da4000 {
 			compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
 			reg = <0 0x01da4000 0 0x3000>;
@@ -2318,9 +2823,12 @@
 			compatible = "qcom,sc8280xp-qmp-ufs-phy";
 			reg = <0 0x01da7000 0 0x1000>;
 
-			clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
-				 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
-			clock-names = "ref", "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_1_CARD_CLKREF_CLK>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 
 			power-domains = <&gcc UFS_CARD_GDSC>;
 
@@ -2343,298 +2851,81 @@
 			reg = <0x0 0x01fc0000 0x0 0x30000>;
 		};
 
-		gpu: gpu@3d00000 {
-			compatible = "qcom,adreno-690.0", "qcom,adreno";
-
-			reg = <0 0x03d00000 0 0x40000>,
-			      <0 0x03d9e000 0 0x1000>,
-			      <0 0x03d61000 0 0x800>;
-			reg-names = "kgsl_3d0_reg_memory",
-				    "cx_mem",
-				    "cx_dbgc";
-			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-			iommus = <&gpu_smmu 0 0xc00>, <&gpu_smmu 1 0xc00>;
-			operating-points-v2 = <&gpu_opp_table>;
-
-			qcom,gmu = <&gmu>;
-			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "gfx-mem";
-			#cooling-cells = <2>;
-
-			status = "disabled";
-
-			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-270000000 {
-					opp-hz = /bits/ 64 <270000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					opp-peak-kBps = <451000>;
-				};
-
-				opp-410000000 {
-					opp-hz = /bits/ 64 <410000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					opp-peak-kBps = <1555000>;
-				};
-
-				opp-500000000 {
-					opp-hz = /bits/ 64 <500000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					opp-peak-kBps = <1555000>;
-				};
-
-				opp-547000000 {
-					opp-hz = /bits/ 64 <547000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
-					opp-peak-kBps = <1555000>;
-				};
-
-				opp-606000000 {
-					opp-hz = /bits/ 64 <606000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					opp-peak-kBps = <2736000>;
-				};
-
-				opp-640000000 {
-					opp-hz = /bits/ 64 <640000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					opp-peak-kBps = <2736000>;
-				};
-
-				opp-655000000 {
-					opp-hz = /bits/ 64 <655000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					opp-peak-kBps = <2736000>;
-				};
-
-				opp-690000000 {
-					opp-hz = /bits/ 64 <690000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					opp-peak-kBps = <2736000>;
-				};
-			};
-		};
-
-		gmu: gmu@3d6a000 {
-			compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu";
-			reg = <0 0x03d6a000 0 0x34000>,
-			      <0 0x03de0000 0 0x10000>,
-			      <0 0x0b290000 0 0x10000>;
-			reg-names = "gmu", "rscc", "gmu_pdc";
-			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hfi", "gmu";
-			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
-				 <&gpucc GPU_CC_CXO_CLK>,
-				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
-				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
-				 <&gpucc GPU_CC_AHB_CLK>,
-				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
-				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
-			clock-names = "gmu",
-				      "cxo",
-				      "axi",
-				      "memnoc",
-				      "ahb",
-				      "hub",
-				      "smmu_vote";
-			power-domains = <&gpucc GPU_CC_CX_GDSC>,
-					<&gpucc GPU_CC_GX_GDSC>;
-			power-domain-names = "cx",
-					     "gx";
-			iommus = <&gpu_smmu 5 0xc00>;
-			operating-points-v2 = <&gmu_opp_table>;
+		remoteproc_slpi: remoteproc@2400000 {
+			compatible = "qcom,sc8280xp-slpi-pas", "qcom,sm8350-slpi-pas";
+			reg = <0 0x02400000 0 0x10000>;
 
-			gmu_opp_table: opp-table {
-				compatible = "operating-points-v2";
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
 
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-				};
-
-				opp-500000000 {
-					opp-hz = /bits/ 64 <500000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-				};
-			};
-		};
-
-		gpucc: clock-controller@3d90000 {
-			compatible = "qcom,sc8280xp-gpucc";
-			reg = <0 0x03d90000 0 0x9000>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
-				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
-			clock-names = "bi_tcxo",
-				      "gcc_gpu_gpll0_clk_src",
-				      "gcc_gpu_gpll0_div_clk_src";
-
-			power-domains = <&rpmhpd SC8280XP_GFX>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
-
-		gpu_smmu: iommu@3da0000 {
-			compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu",
-				     "qcom,smmu-500", "arm,mmu-500";
-			reg = <0 0x03da0000 0 0x20000>;
-			#iommu-cells = <2>;
-			#global-interrupts = <2>;
-			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
-				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
-				 <&gpucc GPU_CC_AHB_CLK>,
-				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
-				 <&gpucc GPU_CC_CX_GMU_CLK>,
-				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
-				 <&gpucc GPU_CC_HUB_AON_CLK>;
-			clock-names = "gcc_gpu_memnoc_gfx_clk",
-				      "gcc_gpu_snoc_dvm_gfx_clk",
-				      "gpu_cc_ahb_clk",
-				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
-				      "gpu_cc_cx_gmu_clk",
-				      "gpu_cc_hub_cx_int_clk",
-				      "gpu_cc_hub_aon_clk";
-
-			power-domains = <&gpucc GPU_CC_CX_GDSC>;
-			dma-coherent;
-		};
-
-		usb_0_hsphy: phy@88e5000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e5000 0 0x400>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_hsphy0: phy@88e7000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e7000 0 0x400>;
-			clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_hsphy1: phy@88e8000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e8000 0 0x400>;
-			clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_hsphy2: phy@88e9000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e9000 0 0x400>;
-			clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_hsphy3: phy@88ea000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088ea000 0 0x400>;
-			clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_qmpphy0: phy@88ef000 {
-			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
-			reg = <0 0x088ef000 0 0x2000>;
-
-			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
-				 <&gcc GCC_USB3_MP0_CLKREF_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
-			clock-names = "aux", "ref", "com_aux", "pipe";
+			clock-names = "xo";
 
-			resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
-				 <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
-			reset-names = "phy", "phy_phy";
+			power-domains = <&rpmhpd SC8280XP_LCX>,
+					<&rpmhpd SC8280XP_LMX>;
+			power-domain-names = "lcx", "lmx";
 
-			power-domains = <&gcc USB30_MP_GDSC>;
+			memory-region = <&pil_slpi_mem>;
 
-			#clock-cells = <0>;
-			clock-output-names = "usb2_phy0_pipe_clk";
+			qcom,qmp = <&aoss_qmp>;
 
-			#phy-cells = <0>;
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
 
 			status = "disabled";
-		};
-
-		usb_2_qmpphy1: phy@88f1000 {
-			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
-			reg = <0 0x088f1000 0 0x2000>;
 
-			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
-				 <&gcc GCC_USB3_MP1_CLKREF_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
-			clock-names = "aux", "ref", "com_aux", "pipe";
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
 
-			resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
-				 <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
-			reset-names = "phy", "phy_phy";
+				label = "slpi";
+				qcom,remote-pid = <3>;
 
-			power-domains = <&gcc USB30_MP_GDSC>;
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-			#clock-cells = <0>;
-			clock-output-names = "usb2_phy1_pipe_clk";
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0521 0x0>;
+					};
 
-			#phy-cells = <0>;
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0522 0x0>;
+					};
 
-			status = "disabled";
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0523 0x0>;
+					};
+				};
+			};
 		};
 
 		remoteproc_adsp: remoteproc@3000000 {
 			compatible = "qcom,sc8280xp-adsp-pas";
-			reg = <0 0x03000000 0 0x100>;
+			reg = <0 0x03000000 0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2731,7 +3022,7 @@
 			status = "disabled";
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2807,7 +3098,7 @@
 			status = "disabled";
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			reg = <0 0x03250000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.6.0";
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2844,7 +3135,7 @@
 			#reset-cells = <1>;
 		};
 
-		swr2: soundwire-controller@3330000 {
+		swr2: soundwire@3330000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03330000 0 0x2000>;
 			interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>,
@@ -2977,7 +3268,7 @@
 				};
 			};
 
-			dmic02_default: dmic02-default-state {
+			dmic23_default: dmic23-default-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
@@ -2993,7 +3284,7 @@
 				};
 			};
 
-			dmic02_sleep: dmic02-sleep-state {
+			dmic23_sleep: dmic23-sleep-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
@@ -3055,6 +3346,180 @@
 			#reset-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-690.0", "qcom,adreno";
+
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>,
+			      <0 0x03d61000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&gpu_smmu 0 0xc00>, <&gpu_smmu 1 0xc00>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-270000000 {
+					opp-hz = /bits/ 64 <270000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <451000>;
+				};
+
+				opp-410000000 {
+					opp-hz = /bits/ 64 <410000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-547000000 {
+					opp-hz = /bits/ 64 <547000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-606000000 {
+					opp-hz = /bits/ 64 <606000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-640000000 {
+					opp-hz = /bits/ 64 <640000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-655000000 {
+					opp-hz = /bits/ 64 <655000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-690000000 {
+					opp-hz = /bits/ 64 <690000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <2736000>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu";
+			reg = <0 0x03d6a000 0 0x34000>,
+			      <0 0x03de0000 0 0x10000>,
+			      <0 0x0b290000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+			iommus = <&gpu_smmu 5 0xc00>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sc8280xp-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+
+			power-domains = <&rpmhpd SC8280XP_GFX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		gpu_smmu: iommu@3da0000 {
+			compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+				      "gcc_gpu_snoc_dvm_gfx_clk",
+				      "gpu_cc_ahb_clk",
+				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
+				      "gpu_cc_cx_gmu_clk",
+				      "gpu_cc_hub_cx_int_clk",
+				      "gpu_cc_hub_aon_clk";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
 		sdc2: mmc@8804000 {
 			compatible = "qcom,sc8280xp-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
@@ -3098,6 +3563,71 @@
 			};
 		};
 
+		usb_0_hsphy: phy@88e5000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e5000 0 0x400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy0: phy@88e7000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e7000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy1: phy@88e8000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e8000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy2: phy@88e9000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e9000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy3: phy@88ea000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088ea000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		usb_0_qmpphy: phy@88eb000 {
 			compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
 			reg = <0 0x088eb000 0 0x4000>;
@@ -3129,6 +3659,14 @@
 					usb_0_qmpphy_out: endpoint {};
 				};
 
+				port@1 {
+					reg = <1>;
+
+					usb_0_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_0_dwc3_ss>;
+					};
+				};
+
 				port@2 {
 					reg = <2>;
 
@@ -3137,6 +3675,54 @@
 			};
 		};
 
+		usb_2_qmpphy0: phy@88ef000 {
+			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+			reg = <0 0x088ef000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_MP0_CLKREF_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+				 <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_qmpphy1: phy@88f1000 {
+			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+			reg = <0 0x088f1000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_MP1_CLKREF_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+				 <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		usb_1_hsphy: phy@8902000 {
 			compatible = "qcom,sc8280xp-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
@@ -3182,6 +3768,14 @@
 					usb_1_qmpphy_out: endpoint {};
 				};
 
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
 				port@2 {
 					reg = <2>;
 
@@ -3330,6 +3924,90 @@
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		usb_2: usb@a4f8800 {
+			compatible = "qcom,sc8280xp-dwc3-mp", "qcom,dwc3";
+			reg = <0 0x0a4f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+				 <&gcc GCC_USB30_MP_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+				 <&gcc GCC_USB30_MP_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
+				      "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+			assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MP_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 857 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 859 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 127 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 126 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 129 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 128 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 131 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 130 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 133 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 132 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-names = "pwr_event_1", "pwr_event_2",
+					  "pwr_event_3", "pwr_event_4",
+					  "hs_phy_1",	 "hs_phy_2",
+					  "hs_phy_3",	 "hs_phy_4",
+					  "dp_hs_phy_1", "dm_hs_phy_1",
+					  "dp_hs_phy_2", "dm_hs_phy_2",
+					  "dp_hs_phy_3", "dm_hs_phy_3",
+					  "dp_hs_phy_4", "dm_hs_phy_4",
+					  "ss_phy_1",	 "ss_phy_2";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_MP_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_MP 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_MP 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_2_dwc3: usb@a400000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a400000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x800 0x0>;
+				phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>,
+				       <&usb_2_hsphy1>, <&usb_2_qmpphy1>,
+				       <&usb_2_hsphy2>,
+				       <&usb_2_hsphy3>;
+				phy-names = "usb2-0", "usb3-0",
+					    "usb2-1", "usb3-1",
+					    "usb2-2",
+					    "usb2-3";
+				dr_mode = "host";
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+			};
+		};
+
 		usb_0: usb@a6f8800 {
 			compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -3354,10 +4032,12 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
 					  "ss_phy_irq";
@@ -3382,9 +4062,26 @@
 				iommus = <&apps_smmu 0x820 0x0>;
 				phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_0_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
 
-				port {
-					usb_0_role_switch: endpoint {
+						usb_0_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_0_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
@@ -3414,10 +4111,12 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 136 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
 					  "ss_phy_irq";
@@ -3442,14 +4141,443 @@
 				iommus = <&apps_smmu 0x860 0x0>;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 
-				port {
-					usb_1_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
 		};
 
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4a000 0 0x1000>;
+
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_0_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci0_default>;
+			pinctrl-1 = <&cci0_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4b000 0 0x1000>;
+
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_1_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci1_default>;
+			pinctrl-1 = <&cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci2: cci@ac4c000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4c000 0 0x1000>;
+
+			interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_2_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci2_default>;
+			pinctrl-1 = <&cci2_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci2_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci2_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci3: cci@ac4d000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4d000 0 0x1000>;
+
+			interrupts = <GIC_SPI 650 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_3_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci3_default>;
+			pinctrl-1 = <&cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci3_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci3_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: camss@ac5a000 {
+			compatible = "qcom,sc8280xp-camss";
+
+			reg = <0 0x0ac5a000 0 0x2000>,
+			      <0 0x0ac5c000 0 0x2000>,
+			      <0 0x0ac65000 0 0x2000>,
+			      <0 0x0ac67000 0 0x2000>,
+			      <0 0x0acaf000 0 0x4000>,
+			      <0 0x0acb3000 0 0x1000>,
+			      <0 0x0acb6000 0 0x4000>,
+			      <0 0x0acba000 0 0x1000>,
+			      <0 0x0acbd000 0 0x4000>,
+			      <0 0x0acc1000 0 0x1000>,
+			      <0 0x0acc4000 0 0x4000>,
+			      <0 0x0acc8000 0 0x1000>,
+			      <0 0x0accb000 0 0x4000>,
+			      <0 0x0accf000 0 0x1000>,
+			      <0 0x0acd2000 0 0x4000>,
+			      <0 0x0acd6000 0 0x1000>,
+			      <0 0x0acd9000 0 0x4000>,
+			      <0 0x0acdd000 0 0x1000>,
+			      <0 0x0ace0000 0 0x4000>,
+			      <0 0x0ace4000 0 0x1000>;
+			reg-names = "csiphy2",
+				    "csiphy3",
+				    "csiphy0",
+				    "csiphy1",
+				    "vfe0",
+				    "csid0",
+				    "vfe1",
+				    "csid1",
+				    "vfe2",
+				    "csid2",
+				    "vfe_lite0",
+				    "csid0_lite",
+				    "vfe_lite1",
+				    "csid1_lite",
+				    "vfe_lite2",
+				    "csid2_lite",
+				    "vfe_lite3",
+				    "csid3_lite",
+				    "vfe3",
+				    "csid3";
+
+			interrupts = <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 762 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 764 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid1_lite",
+					  "vfe_lite1",
+					  "csiphy3",
+					  "csid0",
+					  "vfe0",
+					  "csid1",
+					  "vfe1",
+					  "csid0_lite",
+					  "vfe_lite0",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csid2",
+					  "vfe2",
+					  "csid3_lite",
+					  "csid2_lite",
+					  "vfe_lite3",
+					  "vfe_lite2",
+					  "csid3",
+					  "vfe3";
+
+			power-domains = <&camcc IFE_0_GDSC>,
+					<&camcc IFE_1_GDSC>,
+					<&camcc IFE_2_GDSC>,
+					<&camcc IFE_3_GDSC>,
+					<&camcc TITAN_TOP_GDSC>;
+			power-domain-names = "ife0",
+					     "ife1",
+					     "ife2",
+					     "ife3",
+					     "top";
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CSIPHY0_CLK>,
+				 <&camcc CAMCC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAMCC_CSIPHY1_CLK>,
+				 <&camcc CAMCC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAMCC_CSIPHY2_CLK>,
+				 <&camcc CAMCC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAMCC_CSIPHY3_CLK>,
+				 <&camcc CAMCC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAMCC_IFE_0_AXI_CLK>,
+				 <&camcc CAMCC_IFE_0_CLK>,
+				 <&camcc CAMCC_IFE_0_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_0_CSID_CLK>,
+				 <&camcc CAMCC_IFE_1_AXI_CLK>,
+				 <&camcc CAMCC_IFE_1_CLK>,
+				 <&camcc CAMCC_IFE_1_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_1_CSID_CLK>,
+				 <&camcc CAMCC_IFE_2_AXI_CLK>,
+				 <&camcc CAMCC_IFE_2_CLK>,
+				 <&camcc CAMCC_IFE_2_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_2_CSID_CLK>,
+				 <&camcc CAMCC_IFE_3_AXI_CLK>,
+				 <&camcc CAMCC_IFE_3_CLK>,
+				 <&camcc CAMCC_IFE_3_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_3_CSID_CLK>,
+				 <&camcc CAMCC_IFE_LITE_0_CLK>,
+				 <&camcc CAMCC_IFE_LITE_0_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_LITE_0_CSID_CLK>,
+				 <&camcc CAMCC_IFE_LITE_1_CLK>,
+				 <&camcc CAMCC_IFE_LITE_1_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_LITE_1_CSID_CLK>,
+				 <&camcc CAMCC_IFE_LITE_2_CLK>,
+				 <&camcc CAMCC_IFE_LITE_2_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_LITE_2_CSID_CLK>,
+				 <&camcc CAMCC_IFE_LITE_3_CLK>,
+				 <&camcc CAMCC_IFE_LITE_3_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_LITE_3_CSID_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "vfe0_axi",
+				      "vfe0",
+				      "vfe0_cphy_rx",
+				      "vfe0_csid",
+				      "vfe1_axi",
+				      "vfe1",
+				      "vfe1_cphy_rx",
+				      "vfe1_csid",
+				      "vfe2_axi",
+				      "vfe2",
+				      "vfe2_cphy_rx",
+				      "vfe2_csid",
+				      "vfe3_axi",
+				      "vfe3",
+				      "vfe3_cphy_rx",
+				      "vfe3_csid",
+				      "vfe_lite0",
+				      "vfe_lite0_cphy_rx",
+				      "vfe_lite0_csid",
+				      "vfe_lite1",
+				      "vfe_lite1_cphy_rx",
+				      "vfe_lite1_csid",
+				      "vfe_lite2",
+				      "vfe_lite2_cphy_rx",
+				      "vfe_lite2_csid",
+				      "vfe_lite3",
+				      "vfe_lite3_cphy_rx",
+				      "vfe_lite3_csid",
+				      "gcc_axi_hf",
+				      "gcc_axi_sf";
+
+			iommus = <&apps_smmu 0x2000 0x4e0>,
+				 <&apps_smmu 0x2020 0x4e0>,
+				 <&apps_smmu 0x2040 0x4e0>,
+				 <&apps_smmu 0x2060 0x4e0>,
+				 <&apps_smmu 0x2080 0x4e0>,
+				 <&apps_smmu 0x20e0 0x4e0>,
+				 <&apps_smmu 0x20c0 0x4e0>,
+				 <&apps_smmu 0x20a0 0x4e0>,
+				 <&apps_smmu 0x2400 0x4e0>,
+				 <&apps_smmu 0x2420 0x4e0>,
+				 <&apps_smmu 0x2440 0x4e0>,
+				 <&apps_smmu 0x2460 0x4e0>,
+				 <&apps_smmu 0x2480 0x4e0>,
+				 <&apps_smmu 0x24e0 0x4e0>,
+				 <&apps_smmu 0x24c0 0x4e0>,
+				 <&apps_smmu 0x24a0 0x4e0>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
+					<&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "cam_ahb",
+					     "cam_hf_mnoc",
+					     "cam_sf_mnoc",
+					     "cam_sf_icp_mnoc";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				port@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				port@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sc8280xp-camcc";
+			reg = <0 0x0ad00000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss0: display-subsystem@ae00000 {
 			compatible = "qcom,sc8280xp-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -3480,7 +4608,7 @@
 			mdss0_mdp: display-controller@ae01000 {
 				compatible = "qcom,sc8280xp-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -3578,15 +4706,19 @@
 					 <&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3657,14 +4789,18 @@
 					 <&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
-					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
-						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3734,10 +4870,12 @@
 					 <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
-					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 				interrupt-parent = <&mdss0>;
 				interrupts = <14>;
 				phys = <&mdss0_dp2_phy>;
@@ -3745,8 +4883,11 @@
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
-						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>;
+						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp2_phy 0>,
+							 <&mdss0_dp2_phy 1>,
+							 <&mdss0_dp2_phy 1>;
 				operating-points-v2 = <&mdss0_dp2_opp_table>;
 
 				#sound-dai-cells = <0>;
@@ -3766,6 +4907,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss0_dp2_out: endpoint {
+						};
 					};
 				};
 
@@ -3838,6 +4982,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss0_dp3_out: endpoint {
+						};
 					};
 				};
 
@@ -3996,6 +5143,28 @@
 			interrupt-controller;
 		};
 
+		tsens2: thermal-sensor@c251000 {
+			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c251000 0 0x1ff>,
+			      <0 0x0c224000 0 0x8>;
+			#qcom,sensors = <11>;
+			interrupts-extended = <&pdc 122 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens3: thermal-sensor@c252000 {
+			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c252000 0 0x1ff>,
+			      <0 0x0c225000 0 0x8>;
+			#qcom,sensors = <5>;
+			interrupts-extended = <&pdc 123 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		tsens0: thermal-sensor@c263000 {
 			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
@@ -4007,6 +5176,13 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		restart@c264000 {
+			compatible = "qcom,pshold";
+			reg = <0 0x0c264000 0 0x4>;
+			/* TZ seems to block access */
+			status = "reserved";
+		};
+
 		tsens1: thermal-sensor@c265000 {
 			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
@@ -4030,6 +5206,7 @@
 		sram@c3f0000 {
 			compatible = "qcom,rpmh-stats";
 			reg = <0 0x0c3f0000 0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -4060,6 +5237,194 @@
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 230>;
 			wakeup-parent = <&pdc>;
+
+			cci0_default: cci0-default-state {
+				cci0_i2c0_default: cci0-i2c0-default-pins {
+					/* cci_i2c_sda0, cci_i2c_scl0 */
+					pins = "gpio113", "gpio114";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci0_i2c1_default: cci0-i2c1-default-pins {
+					/* cci_i2c_sda1, cci_i2c_scl1 */
+					pins = "gpio115", "gpio116";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
+					/* cci_i2c_sda0, cci_i2c_scl0 */
+					pins = "gpio113", "gpio114";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
+					/* cci_i2c_sda1, cci_i2c_scl1 */
+					pins = "gpio115", "gpio116";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_default: cci1-default-state {
+				cci1_i2c0_default: cci1-i2c0-default-pins {
+					/* cci_i2c_sda2, cci_i2c_scl2 */
+					pins = "gpio10","gpio11";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci1_i2c1_default: cci1-i2c1-default-pins {
+					/* cci_i2c_sda3, cci_i2c_scl3 */
+					pins = "gpio123","gpio124";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
+					/* cci_i2c_sda2, cci_i2c_scl2 */
+					pins = "gpio10","gpio11";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
+					/* cci_i2c_sda3, cci_i2c_scl3 */
+					pins = "gpio123","gpio124";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_default: cci2-default-state {
+				cci2_i2c0_default: cci2-i2c0-default-pins {
+					/* cci_i2c_sda4, cci_i2c_scl4 */
+					pins = "gpio117","gpio118";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci2_i2c1_default: cci2-i2c1-default-pins {
+					/* cci_i2c_sda5, cci_i2c_scl5 */
+					pins = "gpio12","gpio13";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				cci2_i2c0_sleep: cci2-i2c0-sleep-pins {
+					/* cci_i2c_sda4, cci_i2c_scl4 */
+					pins = "gpio117","gpio118";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci2_i2c1_sleep: cci2-i2c1-sleep-pins {
+					/* cci_i2c_sda5, cci_i2c_scl5 */
+					pins = "gpio12","gpio13";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci3_default: cci3-default-state {
+				cci3_i2c0_default: cci3-i2c0-default-pins {
+					/* cci_i2c_sda6, cci_i2c_scl6 */
+					pins = "gpio145","gpio146";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci3_i2c1_default: cci3-i2c1-default-pins {
+					/* cci_i2c_sda7, cci_i2c_scl7 */
+					pins = "gpio164","gpio165";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				cci3_i2c0_sleep: cci3-i2c0-sleep-pins {
+					/* cci_i2c_sda6, cci_i2c_scl6 */
+					pins = "gpio145","gpio146";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci3_i2c1_sleep: cci3-i2c1-sleep-pins {
+					/* cci_i2c_sda7, cci_i2c_scl7 */
+					pins = "gpio164","gpio165";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			qup_uart18_default: qup-uart18-default-state {
+				cts-pins {
+					pins = "gpio66";
+					function = "qup18";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rts-pins {
+					pins = "gpio67";
+					function = "qup18";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				tx-pins {
+					pins = "gpio68";
+					function = "qup18";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio69";
+					function = "qup18";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+		};
+
+		pcie_smmu: iommu@14f80000 {
+			compatible = "arm,smmu-v3";
+			reg = <0 0x14f80000 0 0x80000>;
+			#iommu-cells = <1>;
+			interrupts = <GIC_SPI 951 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 955 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 953 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq",
+					  "gerror",
+					  "cmdq-sync";
+			dma-coherent;
+			status = "reserved"; /* Controlled by QHEE. */
 		};
 
 		apps_smmu: iommu@15000000 {
@@ -4197,6 +5562,7 @@
 				     <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 890 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 		};
 
 		intc: interrupt-controller@17a00000 {
@@ -4213,7 +5579,7 @@
 			#size-cells = <2>;
 			ranges;
 
-			msi-controller@17a40000 {
+			its: msi-controller@17a40000 {
 				compatible = "arm,gic-v3-its";
 				reg = <0 0x17a40000 0 0x20000>;
 				msi-controller;
@@ -4225,7 +5591,7 @@
 			compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
@@ -4300,7 +5666,7 @@
 			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
 			label = "apps_rsc";
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
@@ -4380,6 +5746,11 @@
 			      <0 0x18592000 0 0x1000>;
 			reg-names = "freq-domain0", "freq-domain1";
 
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1";
+
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
 
@@ -4389,9 +5760,9 @@
 
 		remoteproc_nsp0: remoteproc@1b300000 {
 			compatible = "qcom,sc8280xp-nsp0-pas";
-			reg = <0 0x1b300000 0 0x100>;
+			reg = <0 0x1b300000 0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -4520,9 +5891,9 @@
 
 		remoteproc_nsp1: remoteproc@21300000 {
 			compatible = "qcom,sc8280xp-nsp1-pas";
-			reg = <0 0x21300000 0 0x100>;
+			reg = <0 0x21300000 0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -4588,7 +5959,7 @@
 			mdss1_mdp: display-controller@22001000 {
 				compatible = "qcom,sc8280xp-dpu";
 				reg = <0 0x22001000 0 0x8f000>,
-				      <0 0x220b0000 0 0x2008>;
+				      <0 0x220b0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -4685,10 +6056,12 @@
 					 <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 				interrupt-parent = <&mdss1>;
 				interrupts = <12>;
 				phys = <&mdss1_dp0_phy>;
@@ -4696,8 +6069,11 @@
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>;
+						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp0_phy 0>,
+							 <&mdss1_dp0_phy 1>,
+							 <&mdss1_dp0_phy 1>;
 				operating-points-v2 = <&mdss1_dp0_opp_table>;
 
 				#sound-dai-cells = <0>;
@@ -4717,6 +6093,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss1_dp0_out: endpoint {
+						};
 					};
 				};
 
@@ -4757,10 +6136,12 @@
 					 <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
-					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 				interrupt-parent = <&mdss1>;
 				interrupts = <13>;
 				phys = <&mdss1_dp1_phy>;
@@ -4768,8 +6149,11 @@
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
-						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>;
+						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp1_phy 0>,
+							 <&mdss1_dp1_phy 1>,
+							 <&mdss1_dp1_phy 1>;
 				operating-points-v2 = <&mdss1_dp1_opp_table>;
 
 				#sound-dai-cells = <0>;
@@ -4789,6 +6173,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss1_dp1_out: endpoint {
+						};
 					};
 				};
 
@@ -4829,10 +6216,12 @@
 					 <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
-					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 				interrupt-parent = <&mdss1>;
 				interrupts = <14>;
 				phys = <&mdss1_dp2_phy>;
@@ -4840,8 +6229,11 @@
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
-						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>;
+						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp2_phy 0>,
+							 <&mdss1_dp2_phy 1>,
+							 <&mdss1_dp2_phy 1>;
 				operating-points-v2 = <&mdss1_dp2_opp_table>;
 
 				#sound-dai-cells = <0>;
@@ -4861,6 +6253,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss1_dp2_out: endpoint {
+						};
 					};
 				};
 
@@ -4933,6 +6328,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss1_dp3_out: endpoint {
+						};
 					};
 				};
 
@@ -5063,7 +6461,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -5078,7 +6475,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -5093,7 +6489,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -5108,7 +6503,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -5123,7 +6517,6 @@
 
 		cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -5138,7 +6531,6 @@
 
 		cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -5153,7 +6545,6 @@
 
 		cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -5168,7 +6559,6 @@
 
 		cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -5183,7 +6573,6 @@
 
 		cluster0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -5196,9 +6585,35 @@
 			};
 		};
 
+		gpu-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens2 2>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 15>;
 
diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 2ed39d402d3f..74cb29cb7f1a 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -96,6 +96,26 @@
 
 		vin-supply = <&vph_pwr>;
 	};
+
+	/*
+	 * this is also used for APC1 CPU power, touching it resets the board
+	 */
+	vreg_l10a_1p8: vreg-l10a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_l10a_1p8";
+		regulator-min-microvolt = <1804000>;
+		regulator-max-microvolt = <1804000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&adreno_gpu {
+	status = "okay";
+};
+
+&adreno_gpu_zap {
+	firmware-name = "qcom/sda660/a512_zap.mbn";
 };
 
 &adsp_pil {
@@ -155,6 +175,7 @@
 	 * BAM DMA interconnects support is in place.
 	 */
 	/delete-property/ clocks;
+	/delete-property/ clock-names;
 };
 
 &blsp1_uart2 {
@@ -167,6 +188,7 @@
 	 * BAM DMA interconnects support is in place.
 	 */
 	/delete-property/ clocks;
+	/delete-property/ clock-names;
 };
 
 &blsp2_uart1 {
@@ -220,6 +242,7 @@
 	status = "okay";
 
 	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
 };
 
@@ -227,9 +250,15 @@
 	status = "okay";
 
 	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
 };
 
+&remoteproc_mss {
+	firmware-name = "qcom/sda660/mba.mbn", "qcom/sda660/modem.mbn";
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm660-regulators";
@@ -269,6 +298,11 @@
 			regulator-allow-set-load;
 		};
 
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <848000>;
+		};
+
 		vreg_l6a_1p3: l6 {
 			regulator-min-microvolt = <1304000>;
 			regulator-max-microvolt = <1368000>;
@@ -461,3 +495,21 @@
 	dr_mode = "peripheral";
 	extcon = <&extcon_usb>;
 };
+
+&usb3_qmpphy {
+	vdda-phy-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l9a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l6a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l19a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l8b_3p3>;
+
+	qcom,calibration-variant = "Inforce_IFC6560";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm450-lenovo-tbx605f.dts b/arch/arm64/boot/dts/qcom/sdm450-lenovo-tbx605f.dts
new file mode 100644
index 000000000000..735a21df8cc9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm450-lenovo-tbx605f.dts
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Neil Armstrong <neil.armstrong@linaro.org>
+ */
+/dts-v1/;
+
+#include "sdm450.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/ {
+	model = "Lenovo Smart Tab M10";
+	compatible = "lenovo,tbx605f", "qcom,sdm450";
+	chassis-type = "tablet";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (1200 * 1920 * 3)>;
+
+			width = <1200>;
+			height = <1920>;
+			stride = <(1200 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	reserved-memory {
+		other-ext-region@0 {
+			no-map;
+			reg = <0x00 0x84500000 0x00 0x2300000>;
+		};
+	};
+
+	backlight: gpio-backlight {
+		compatible = "gpio-backlight";
+
+		gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+
+		default-on;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_enable_active>;
+		pinctrl-1 = <&backlight_enable_sleep>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm8953_s3>;
+	vddio-supply = <&pm8953_l6>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "boe,tv101wum-ll2";
+		reg = <0>;
+
+		vsp-supply = <&lab>;
+		vsn-supply = <&ibb>;
+		reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+
+		backlight = <&backlight>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_reset_active>;
+		pinctrl-1 = <&panel_reset_sleep>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vcca-supply = <&pm8953_l3>;
+
+	status = "okay";
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5506";
+		reg = <0x38>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&pm8953_l10>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active &ts_reset_active>;
+
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1200>;
+		touchscreen-size-y = <1920>;
+	};
+};
+
+&ibb {
+	regulator-min-microvolt = <4600000>;
+	regulator-max-microvolt = <6000000>;
+	qcom,discharge-resistor-kohms = <32>;
+};
+
+&lab {
+	regulator-min-microvolt = <4600000>;
+	regulator-max-microvolt = <6000000>;
+	qcom,soft-start-us = <800>;
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <1156000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <135 4>;
+
+	backlight_enable_active: backlight-enable-active-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	backlight_enable_sleep: backlight-enable-sleep-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	panel_reset_active: panel-reset-active-state {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	panel_reset_sleep: panel-reset-sleep-state {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset_active: ts-reset-active-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <0x08>;
+		bias-pull-up;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&wcnss {
+	vddpx-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+
+	vddxo-supply = <&pm8953_l7>;
+	vddrfa-supply = <&pm8953_l19>;
+	vddpa-supply = <&pm8953_l9>;
+	vdddig-supply = <&pm8953_l5>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
index 362be5719dd2..a288d52fb6d7 100644
--- a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
+++ b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
@@ -4,7 +4,7 @@
  */
 /dts-v1/;
 
-#include "msm8953.dtsi"
+#include "sdm450.dtsi"
 #include "pm8953.dtsi"
 #include "pmi8950.dtsi"
 
@@ -248,5 +248,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm450.dtsi b/arch/arm64/boot/dts/qcom/sdm450.dtsi
new file mode 100644
index 000000000000..b222aeb459a3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm450.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz> */
+
+#include "msm8953.dtsi"
+
+&gpu_opp_table {
+	/delete-node/ opp-650000000;
+
+	opp-600000000 {
+		opp-hz = /bits/ 64 <600000000>;
+		opp-supported-hw = <0xff>;
+		required-opps = <&rpmpd_opp_turbo>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 87d0293c728d..40522e237eac 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -90,6 +90,8 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
 
 		key-camera-focus {
 			label = "Camera Focus";
@@ -155,7 +157,7 @@
 };
 
 &adsp_pil {
-	firmware-name = "qcom/sdm630/Sony/nile/adsp.mdt";
+	firmware-name = "qcom/sdm630/Sony/nile/adsp.mbn";
 };
 
 &blsp_i2c1 {
@@ -241,6 +243,16 @@
 	};
 };
 
+&pm660l_wled {
+	status = "okay";
+
+	qcom,switching-freq = <800>;
+	qcom,ovp-millivolt = <29600>;
+	qcom,current-boost-limit = <970>;
+	qcom,current-limit-microamp = <17500>;
+	qcom,num-strings = <2>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -635,6 +647,13 @@
 		bias-disable;
 	};
 
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio64", "gpio113";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
 	imx300_vana_default: imx300-vana-default-state {
 		pins = "gpio50";
 		function = "gpio";
@@ -658,10 +677,16 @@
 };
 
 &usb3 {
+	qcom,select-utmi-as-pipe-clk;
+
 	status = "okay";
 };
 
 &usb3_dwc3 {
+	maximum-speed = "high-speed";
+	phys = <&qusb2phy0>;
+	phy-names = "usb2-phy";
+
 	dr_mode = "peripheral";
 	extcon = <&extcon_usb>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 775700f78e0f..8b1a45a4e56e 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -4,6 +4,7 @@
  * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sdm660.h>
 #include <dt-bindings/clock/qcom,gpucc-sdm660.h>
 #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
@@ -13,6 +14,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/soc/qcom,apr.h>
 
 / {
@@ -48,170 +50,170 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@100 {
+		cpu0: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
-			cpu-idle-states = <&PERF_CPU_SLEEP_0
-						&PERF_CPU_SLEEP_1
-						&PERF_CLUSTER_SLEEP_0
-						&PERF_CLUSTER_SLEEP_1
-						&PERF_CLUSTER_SLEEP_2>;
+			cpu-idle-states = <&perf_cpu_sleep_0
+						&perf_cpu_sleep_1
+						&perf_cluster_sleep_0
+						&perf_cluster_sleep_1
+						&perf_cluster_sleep_2>;
 			capacity-dmips-mhz = <1126>;
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
+			next-level-cache = <&l2_1>;
+			l2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU1: cpu@101 {
+		cpu1: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
-			cpu-idle-states = <&PERF_CPU_SLEEP_0
-						&PERF_CPU_SLEEP_1
-						&PERF_CLUSTER_SLEEP_0
-						&PERF_CLUSTER_SLEEP_1
-						&PERF_CLUSTER_SLEEP_2>;
+			cpu-idle-states = <&perf_cpu_sleep_0
+						&perf_cpu_sleep_1
+						&perf_cluster_sleep_0
+						&perf_cluster_sleep_1
+						&perf_cluster_sleep_2>;
 			capacity-dmips-mhz = <1126>;
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 		};
 
-		CPU2: cpu@102 {
+		cpu2: cpu@102 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
-			cpu-idle-states = <&PERF_CPU_SLEEP_0
-						&PERF_CPU_SLEEP_1
-						&PERF_CLUSTER_SLEEP_0
-						&PERF_CLUSTER_SLEEP_1
-						&PERF_CLUSTER_SLEEP_2>;
+			cpu-idle-states = <&perf_cpu_sleep_0
+						&perf_cpu_sleep_1
+						&perf_cluster_sleep_0
+						&perf_cluster_sleep_1
+						&perf_cluster_sleep_2>;
 			capacity-dmips-mhz = <1126>;
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 		};
 
-		CPU3: cpu@103 {
+		cpu3: cpu@103 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
-			cpu-idle-states = <&PERF_CPU_SLEEP_0
-						&PERF_CPU_SLEEP_1
-						&PERF_CLUSTER_SLEEP_0
-						&PERF_CLUSTER_SLEEP_1
-						&PERF_CLUSTER_SLEEP_2>;
+			cpu-idle-states = <&perf_cpu_sleep_0
+						&perf_cpu_sleep_1
+						&perf_cluster_sleep_0
+						&perf_cluster_sleep_1
+						&perf_cluster_sleep_2>;
 			capacity-dmips-mhz = <1126>;
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 		};
 
-		CPU4: cpu@0 {
+		cpu4: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
-			cpu-idle-states = <&PWR_CPU_SLEEP_0
-						&PWR_CPU_SLEEP_1
-						&PWR_CLUSTER_SLEEP_0
-						&PWR_CLUSTER_SLEEP_1
-						&PWR_CLUSTER_SLEEP_2>;
+			cpu-idle-states = <&pwr_cpu_sleep_0
+						&pwr_cpu_sleep_1
+						&pwr_cluster_sleep_0
+						&pwr_cluster_sleep_1
+						&pwr_cluster_sleep_2>;
 			capacity-dmips-mhz = <1024>;
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
+			next-level-cache = <&l2_0>;
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU5: cpu@1 {
+		cpu5: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
-			cpu-idle-states = <&PWR_CPU_SLEEP_0
-						&PWR_CPU_SLEEP_1
-						&PWR_CLUSTER_SLEEP_0
-						&PWR_CLUSTER_SLEEP_1
-						&PWR_CLUSTER_SLEEP_2>;
+			cpu-idle-states = <&pwr_cpu_sleep_0
+						&pwr_cpu_sleep_1
+						&pwr_cluster_sleep_0
+						&pwr_cluster_sleep_1
+						&pwr_cluster_sleep_2>;
 			capacity-dmips-mhz = <1024>;
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU6: cpu@2 {
+		cpu6: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
-			cpu-idle-states = <&PWR_CPU_SLEEP_0
-						&PWR_CPU_SLEEP_1
-						&PWR_CLUSTER_SLEEP_0
-						&PWR_CLUSTER_SLEEP_1
-						&PWR_CLUSTER_SLEEP_2>;
+			cpu-idle-states = <&pwr_cpu_sleep_0
+						&pwr_cpu_sleep_1
+						&pwr_cluster_sleep_0
+						&pwr_cluster_sleep_1
+						&pwr_cluster_sleep_2>;
 			capacity-dmips-mhz = <1024>;
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU7: cpu@3 {
+		cpu7: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
-			cpu-idle-states = <&PWR_CPU_SLEEP_0
-						&PWR_CPU_SLEEP_1
-						&PWR_CLUSTER_SLEEP_0
-						&PWR_CLUSTER_SLEEP_1
-						&PWR_CLUSTER_SLEEP_2>;
+			cpu-idle-states = <&pwr_cpu_sleep_0
+						&pwr_cpu_sleep_1
+						&pwr_cluster_sleep_0
+						&pwr_cluster_sleep_1
+						&pwr_cluster_sleep_2>;
 			capacity-dmips-mhz = <1024>;
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core1 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core2 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core3 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 
 			cluster1 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 			};
 		};
@@ -219,7 +221,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			PWR_CPU_SLEEP_0: cpu-sleep-0-0 {
+			pwr_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "pwr-retention";
 				arm,psci-suspend-param = <0x40000002>;
@@ -228,7 +230,7 @@
 				min-residency-us = <200>;
 			};
 
-			PWR_CPU_SLEEP_1: cpu-sleep-0-1 {
+			pwr_cpu_sleep_1: cpu-sleep-0-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "pwr-power-collapse";
 				arm,psci-suspend-param = <0x40000003>;
@@ -238,7 +240,7 @@
 				local-timer-stop;
 			};
 
-			PERF_CPU_SLEEP_0: cpu-sleep-1-0 {
+			perf_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "perf-retention";
 				arm,psci-suspend-param = <0x40000002>;
@@ -247,7 +249,7 @@
 				min-residency-us = <200>;
 			};
 
-			PERF_CPU_SLEEP_1: cpu-sleep-1-1 {
+			perf_cpu_sleep_1: cpu-sleep-1-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "perf-power-collapse";
 				arm,psci-suspend-param = <0x40000003>;
@@ -257,7 +259,7 @@
 				local-timer-stop;
 			};
 
-			PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 {
+			pwr_cluster_sleep_0: cluster-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "pwr-cluster-dynamic-retention";
 				arm,psci-suspend-param = <0x400000F2>;
@@ -267,7 +269,7 @@
 				local-timer-stop;
 			};
 
-			PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 {
+			pwr_cluster_sleep_1: cluster-sleep-0-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "pwr-cluster-retention";
 				arm,psci-suspend-param = <0x400000F3>;
@@ -277,7 +279,7 @@
 				local-timer-stop;
 			};
 
-			PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 {
+			pwr_cluster_sleep_2: cluster-sleep-0-2 {
 				compatible = "arm,idle-state";
 				idle-state-name = "pwr-cluster-retention";
 				arm,psci-suspend-param = <0x400000F4>;
@@ -287,7 +289,7 @@
 				local-timer-stop;
 			};
 
-			PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 {
+			perf_cluster_sleep_0: cluster-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "perf-cluster-dynamic-retention";
 				arm,psci-suspend-param = <0x400000F2>;
@@ -297,7 +299,7 @@
 				local-timer-stop;
 			};
 
-			PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 {
+			perf_cluster_sleep_1: cluster-sleep-1-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "perf-cluster-retention";
 				arm,psci-suspend-param = <0x400000F3>;
@@ -307,7 +309,7 @@
 				local-timer-stop;
 			};
 
-			PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 {
+			perf_cluster_sleep_2: cluster-sleep-1-2 {
 				compatible = "arm,idle-state";
 				idle-state-name = "perf-cluster-retention";
 				arm,psci-suspend-param = <0x400000F4>;
@@ -371,7 +373,7 @@
 			mboxes = <&apcs_glb 0>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-sdm660";
+				compatible = "qcom,rpm-sdm660", "qcom,glink-smd-rpm";
 				qcom,glink-channels = "rpm_requests";
 
 				rpmcc: clock-controller {
@@ -507,6 +509,12 @@
 			reg = <0x0 0xfed00000 0x0 0xa00000>;
 			no-map;
 		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+			size = <0x0 0x4000>;
+			no-map;
+		};
 	};
 
 	smem: smem {
@@ -606,9 +614,6 @@
 			compatible = "qcom,sdm660-bimc";
 			reg = <0x01008000 0x78000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		restart@10ac000 {
@@ -620,28 +625,17 @@
 			compatible = "qcom,sdm660-cnoc";
 			reg = <0x01500000 0x10000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		snoc: interconnect@1626000 {
 			compatible = "qcom,sdm660-snoc";
 			reg = <0x01626000 0x7090>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		anoc2_smmu: iommu@16c0000 {
 			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
 			reg = <0x016c0000 0x40000>;
-
-			assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			assigned-clock-rates = <1000>;
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "bus";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -678,24 +672,18 @@
 				<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
-
-			status = "disabled";
 		};
 
 		a2noc: interconnect@1704000 {
 			compatible = "qcom,sdm660-a2noc";
 			reg = <0x01704000 0xc100>;
 			#interconnect-cells = <1>;
-			clock-names = "bus",
-				      "bus_a",
-				      "ipa",
+			clock-names = "ipa",
 				      "ufs_axi",
 				      "aggre2_ufs_axi",
 				      "aggre2_usb3_axi",
 				      "cfg_noc_usb2_axi";
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-				 <&rpmcc RPM_SMD_IPA_CLK>,
+			clocks = <&rpmcc RPM_SMD_IPA_CLK>,
 				 <&gcc GCC_UFS_AXI_CLK>,
 				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
@@ -706,10 +694,8 @@
 			compatible = "qcom,sdm660-mnoc";
 			reg = <0x01745000 0xa010>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "iface";
-			clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
-				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
-				 <&mmcc AHB_CLK_SRC>;
+			clock-names = "iface";
+			clocks = <&mmcc AHB_CLK_SRC>;
 		};
 
 		tsens: thermal-sensor@10ae000 {
@@ -1076,7 +1062,7 @@
 					<&rpmpd SDM660_VDDMX>;
 			power-domain-names = "cx", "mx";
 
-			memory-region = <&mba_region>, <&mpss_region>;
+			memory-region = <&mba_region>, <&mpss_region>, <&mdata_mem>;
 
 			status = "disabled";
 
@@ -1120,6 +1106,7 @@
 			interconnect-names = "gfx-mem";
 
 			operating-points-v2 = <&gpu_sdm630_opp_table>;
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -1168,6 +1155,10 @@
 					opp-supported-hw = <0xff>;
 				};
 			};
+
+			adreno_gpu_zap: zap-shader {
+				memory-region = <&zap_shader_region>;
+			};
 		};
 
 		kgsl_smmu: iommu@5040000 {
@@ -1186,7 +1177,9 @@
 			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
 				 <&gcc GCC_BIMC_GFX_CLK>,
 				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
-			clock-names = "iface", "mem", "mem_iface";
+			clock-names = "iface",
+			              "mem",
+				      "mem_iface";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -1202,8 +1195,6 @@
 				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
-
-			status = "disabled";
 		};
 
 		gpucc: clock-controller@5065000 {
@@ -1219,7 +1210,6 @@
 			clock-names = "xo",
 				      "gcc_gpu_gpll0_clk",
 				      "gcc_gpu_gpll0_div_clk";
-			status = "disabled";
 		};
 
 		lpass_smmu: iommu@5100000 {
@@ -1249,8 +1239,6 @@
 				<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
-
-			status = "disabled";
 		};
 
 		sram@290000 {
@@ -1288,27 +1276,27 @@
 				 <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_SLEEP_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
 			clock-names = "cfg_noc",
 				      "core",
 				      "iface",
 				      "sleep",
-				      "mock_utmi",
-				      "bus";
+				      "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_MASTER_CLK>,
-					  <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			assigned-clock-rates = <19200000>, <120000000>,
-					       <19200000>;
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
 
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB_30_GDSC>;
-			qcom,select-utmi-as-pipe-clk;
 
 			resets = <&gcc GCC_USB_30_BCR>;
 
@@ -1318,18 +1306,42 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 
-				/*
-				 * SDM630 technically supports USB3 but I
-				 * haven't seen any devices making use of it.
-				 */
-				maximum-speed = "high-speed";
-				phys = <&qusb2phy0>;
-				phy-names = "usb2-phy";
+				phys = <&qusb2phy0>, <&usb3_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
 				snps,hird-threshold = /bits/ 8 <0>;
 			};
 		};
 
+		usb3_qmpphy: phy@c010000 {
+			compatible = "qcom,sdm660-qmp-usb3-phy";
+			reg = <0x0c010000 0x1000>;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>;
+
+			status = "disabled";
+		};
+
 		qusb2phy0: phy@c012000 {
 			compatible = "qcom,sdm660-qusb2-phy";
 			reg = <0x0c012000 0x180>;
@@ -1374,6 +1386,7 @@
 					<&xo_board>;
 			clock-names = "iface", "core", "xo";
 
+			resets = <&gcc GCC_SDCC2_BCR>;
 
 			interconnects = <&a2noc 3 &a2noc 10>,
 					<&gnoc 0 &cnoc 28>;
@@ -1428,6 +1441,8 @@
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
 			clock-names = "iface", "core", "xo", "ice";
 
+			resets = <&gcc GCC_SDCC1_BCR>;
+
 			interconnects = <&a2noc 2 &a2noc 10>,
 					<&gnoc 0 &cnoc 27>;
 			interconnect-names = "sdhc-ddr", "cpu-sdhc";
@@ -1485,8 +1500,12 @@
 					  <&gcc GCC_USB20_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <60000000>;
 
-			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq";
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq";
 
 			qcom,select-utmi-as-pipe-clk;
 
@@ -1498,6 +1517,8 @@
 				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 
 				/* This is the HS-only host */
 				maximum-speed = "high-speed";
@@ -1527,8 +1548,8 @@
 					<&sleep_clk>,
 					<&gcc GCC_MMSS_GPLL0_CLK>,
 					<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
-					<&mdss_dsi0_phy 1>,
-					<&mdss_dsi0_phy 0>,
+					<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+					<&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
 					<0>,
 					<0>,
 					<0>,
@@ -1650,8 +1671,8 @@
 
 				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
 						  <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_BYTE0_CLK>,
@@ -2204,10 +2225,9 @@
 
 			clocks = <&mmcc MNOC_AHB_CLK>,
 				 <&mmcc BIMC_SMMU_AHB_CLK>,
-				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
 				 <&mmcc BIMC_SMMU_AXI_CLK>;
 			clock-names = "iface-mm", "iface-smmu",
-				      "bus-mm", "bus-smmu";
+				      "bus-smmu";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -2324,12 +2344,6 @@
 			compatible = "qcom,sdm660-gnoc";
 			reg = <0x17900000 0xe000>;
 			#interconnect-cells = <1>;
-			/*
-			 * This one apparently features no clocks,
-			 * so let's not mess with the driver needlessly
-			 */
-			clock-names = "bus", "bus_a";
-			clocks = <&xo_board>, <&xo_board>;
 		};
 
 		apcs_glb: mailbox@17911000 {
@@ -2412,6 +2426,33 @@
 			redistributor-stride = <0x0 0x20000>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0x18800000 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			clocks = <&rpmcc RPM_SMD_RF_CLK1_PIN>;
+			clock-names = "cxo_ref_clk_pin";
+			interrupts =
+				<GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&anoc2_smmu 0x1a00>,
+				 <&anoc2_smmu 0x1a01>;
+			qcom,snoc-host-cap-8bit-quirk;
+			qcom,no-msa-ready-indicator;
+			status = "disabled";
+		};
 	};
 
 	sound: sound {
@@ -2420,7 +2461,6 @@
 	thermal-zones {
 		aoss-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 0>;
 
@@ -2435,7 +2475,6 @@
 
 		cpuss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 1>;
 
@@ -2450,7 +2489,6 @@
 
 		cpuss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 2>;
 
@@ -2465,7 +2503,6 @@
 
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 3>;
 
@@ -2486,7 +2523,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 4>;
 
@@ -2507,7 +2543,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -2528,7 +2563,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 6>;
 
@@ -2555,7 +2589,6 @@
 
 		pwr-cluster-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 7>;
 
@@ -2576,26 +2609,44 @@
 
 		gpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 8>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&adreno_gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				gpu_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 	};
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 1 0xf08>,
-				 <GIC_PPI 2 0xf08>,
-				 <GIC_PPI 3 0xf08>,
-				 <GIC_PPI 0 0xf08>;
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 301eca9a4f31..55a45b528bd3 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -36,6 +36,14 @@
 		};
 	};
 
+	/* Dummy regulator until PMI632 has LCDB VSP/VSN support */
+	lcdb_dummy: regulator-lcdb-dummy {
+		compatible = "regulator-fixed";
+		regulator-name = "lcdb_dummy";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -44,11 +52,20 @@
 	};
 };
 
-&hsusb_phy {
+&gpu {
 	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/msm8953/fairphone/fp3/a506_zap.mbn";
+};
+
+&hsusb_phy {
 	vdd-supply = <&pm8953_l3>;
 	vdda-pll-supply = <&pm8953_l7>;
 	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
 };
 
 &i2c_3 {
@@ -80,9 +97,62 @@
 	};
 };
 
-&pm8953_resin {
+&lpass {
+	firmware-name = "qcom/msm8953/fairphone/fp3/adsp.mbn";
+
+	status = "okay";
+};
+
+&mdss {
 	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm8953_s3>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "djn,98-03057-6598b-i";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+
+		iovcc-supply = <&pm8953_l6>;
+		vsn-supply = <&lcdb_dummy>;
+		vsp-supply = <&lcdb_dummy>;
+
+		pinctrl-0 = <&mdss_te_default>;
+		pinctrl-names = "default";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	vcca-supply = <&pm8953_l3>;
+	status = "okay";
+};
+
+&mpss {
+	firmware-name = "qcom/msm8953/fairphone/fp3/mba.mbn",
+			"qcom/msm8953/fairphone/fp3/modem.mbn";
+	pll-supply = <&pm8953_l7>;
+
+	status = "okay";
+};
+
+&pm8953_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pmi632_lpg {
@@ -112,18 +182,51 @@
 	};
 };
 
-&sdhc_1 {
+&pmi632_typec {
 	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		typec-power-opmode = "default";
+		pd-disable;
+
+		port {
+			pmi632_hs_in: endpoint {
+				remote-endpoint = <&usb_dwc3_hs>;
+			};
+		};
+	};
+};
+
+&pmi632_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <1000000>;
+	status = "okay";
+};
+
+&pmi632_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
 	vmmc-supply = <&pm8953_l8>;
 	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
 };
 
 &sdhc_2 {
-	status = "okay";
 	vmmc-supply = <&pm8953_l11>;
 	vqmmc-supply = <&pm8953_l12>;
 
 	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
 };
 
 &rpm_requests {
@@ -140,10 +243,12 @@
 			regulator-min-microvolt = <984000>;
 			regulator-max-microvolt = <1240000>;
 		};
+
 		pm8953_s4: s4 {
 			regulator-min-microvolt = <1036000>;
 			regulator-max-microvolt = <2040000>;
 		};
+
 		pm8953_s5: s5 {
 			regulator-min-microvolt = <1036000>;
 			regulator-max-microvolt = <2040000>;
@@ -153,66 +258,82 @@
 			regulator-min-microvolt = <975000>;
 			regulator-max-microvolt = <1050000>;
 		};
+
 		pm8953_l2: l2 {
 			regulator-min-microvolt = <975000>;
 			regulator-max-microvolt = <1175000>;
 		};
+
 		pm8953_l3: l3 {
 			regulator-min-microvolt = <925000>;
 			regulator-max-microvolt = <925000>;
 		};
+
 		pm8953_l5: l5 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		pm8953_l6: l6 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		pm8953_l7: l7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1900000>;
 		};
+
 		pm8953_l8: l8 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 		};
+
 		pm8953_l9: l9 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3300000>;
 		};
+
 		pm8953_l10: l10 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <3000000>;
 		};
+
 		pm8953_l11: l11 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 		};
+
 		pm8953_l12: l12 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2950000>;
 		};
+
 		pm8953_l13: l13 {
 			regulator-min-microvolt = <3125000>;
 			regulator-max-microvolt = <3125000>;
 		};
+
 		pm8953_l16: l16 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		pm8953_l17: l17 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 		};
+
 		pm8953_l19: l19 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1350000>;
 		};
+
 		pm8953_l22: l22 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 		};
+
 		pm8953_l23: l23 {
 			regulator-min-microvolt = <975000>;
 			regulator-max-microvolt = <1225000>;
@@ -226,6 +347,13 @@
 	 * 135-138: fingerprint reader (SPI)
 	 */
 	gpio-reserved-ranges = <0 4>, <135 4>;
+
+	mdss_te_default: mdss-te-default-state {
+		pins = "gpio24";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
 };
 
 &uart_0 {
@@ -236,6 +364,26 @@
 	status = "okay";
 };
 
-&usb3_dwc3 {
-	dr_mode = "peripheral";
+&usb_dwc3_hs {
+	remote-endpoint = <&pmi632_hs_in>;
+};
+
+&wcnss {
+	firmware-name = "qcom/msm8953/fairphone/fp3/wcnss.mbn";
+	vddpx-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&wcnss_ctrl {
+	firmware-name = "qcom/msm8953/fairphone/fp3/WCNSS_qcom_wlan_nv.bin";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3680";
+
+	vddxo-supply = <&pm8953_l7>;
+	vddrfa-supply = <&pm8953_l19>;
+	vddpa-supply = <&pm8953_l9>;
+	vdddig-supply = <&pm8953_l5>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
index c82d6e628d2c..2f55db0c8ce3 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
@@ -287,5 +287,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm632.dtsi b/arch/arm64/boot/dts/qcom/sdm632.dtsi
index 645b9f6a801f..40d86d91b67f 100644
--- a/arch/arm64/boot/dts/qcom/sdm632.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm632.dtsi
@@ -14,10 +14,10 @@
 
 			cooling-maps {
 				map0 {
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -42,40 +42,48 @@
 
 /*
  * SDM632 uses Kryo 250 instead of Cortex A53
- * CPU0-3 are efficiency cores, CPU4-7 are performance cores
+ * cpu0-3 are efficiency cores, cpu4-7 are performance cores
  */
-&CPU0 {
+&cpu0 {
 	compatible = "qcom,kryo250";
 };
 
-&CPU1 {
+&cpu1 {
 	compatible = "qcom,kryo250";
 };
 
-&CPU2 {
+&cpu2 {
 	compatible = "qcom,kryo250";
 };
 
-&CPU3 {
+&cpu3 {
 	compatible = "qcom,kryo250";
 };
 
-&CPU4 {
+&cpu4 {
 	compatible = "qcom,kryo250";
 	capacity-dmips-mhz = <1980>;
 };
 
-&CPU5 {
+&cpu5 {
 	compatible = "qcom,kryo250";
 	capacity-dmips-mhz = <1980>;
 };
 
-&CPU6 {
+&cpu6 {
 	compatible = "qcom,kryo250";
 	capacity-dmips-mhz = <1980>;
 };
 
-&CPU7 {
+&cpu7 {
 	compatible = "qcom,kryo250";
 	capacity-dmips-mhz = <1980>;
 };
+
+&gpu_opp_table {
+	opp-725000000 {
+		opp-hz = /bits/ 64 <725000000>;
+		opp-supported-hw = <0xff>;
+		required-opps = <&rpmpd_opp_turbo>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index 3c47410ba94c..a9926ad6c6f9 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -107,6 +107,7 @@
 	status = "okay";
 
 	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
 };
 
@@ -404,6 +405,8 @@
 &sdhc_2 {
 	status = "okay";
 
+	cd-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
 	vmmc-supply = <&vreg_l5b_2p95>;
 	vqmmc-supply = <&vreg_l2b_2p95>;
 };
@@ -413,10 +416,16 @@
 };
 
 &usb3 {
+	qcom,select-utmi-as-pipe-clk;
+
 	status = "okay";
 };
 
 &usb3_dwc3 {
+	maximum-speed = "high-speed";
+	phys = <&qusb2phy0>;
+	phy-names = "usb2-phy";
+
 	dr_mode = "peripheral";
 	extcon = <&extcon_usb>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
index f89b27c99f40..ef4a563c0feb 100644
--- a/arch/arm64/boot/dts/qcom/sdm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -85,49 +85,49 @@
 	};
 };
 
-&CPU0 {
+&cpu0 {
 	compatible = "qcom,kryo260";
 	capacity-dmips-mhz = <1024>;
 	/delete-property/ operating-points-v2;
 };
 
-&CPU1 {
+&cpu1 {
 	compatible = "qcom,kryo260";
 	capacity-dmips-mhz = <1024>;
 	/delete-property/ operating-points-v2;
 };
 
-&CPU2 {
+&cpu2 {
 	compatible = "qcom,kryo260";
 	capacity-dmips-mhz = <1024>;
 	/delete-property/ operating-points-v2;
 };
 
-&CPU3 {
+&cpu3 {
 	compatible = "qcom,kryo260";
 	capacity-dmips-mhz = <1024>;
 	/delete-property/ operating-points-v2;
 };
 
-&CPU4 {
+&cpu4 {
 	compatible = "qcom,kryo260";
 	capacity-dmips-mhz = <640>;
 	/delete-property/ operating-points-v2;
 };
 
-&CPU5 {
+&cpu5 {
 	compatible = "qcom,kryo260";
 	capacity-dmips-mhz = <640>;
 	/delete-property/ operating-points-v2;
 };
 
-&CPU6 {
+&cpu6 {
 	compatible = "qcom,kryo260";
 	capacity-dmips-mhz = <640>;
 	/delete-property/ operating-points-v2;
 };
 
-&CPU7 {
+&cpu7 {
 	compatible = "qcom,kryo260";
 	capacity-dmips-mhz = <640>;
 	/delete-property/ operating-points-v2;
@@ -170,8 +170,8 @@
 
 		assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
 					<&mmcc PCLK1_CLK_SRC>;
-		assigned-clock-parents = <&mdss_dsi1_phy 0>,
-						<&mdss_dsi1_phy 1>;
+		assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+					 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 		clocks = <&mmcc MDSS_MDP_CLK>,
 				<&mmcc MDSS_BYTE1_CLK>,
@@ -239,10 +239,10 @@
 			<&sleep_clk>,
 			<&gcc GCC_MMSS_GPLL0_CLK>,
 			<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
-			<&mdss_dsi0_phy 1>,
-			<&mdss_dsi0_phy 0>,
-			<&mdss_dsi1_phy 1>,
-			<&mdss_dsi1_phy 0>,
+			<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+			<&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+			<&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+			<&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
 			<0>,
 			<0>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
index 32a7bd59e1ec..d01422844fbf 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
@@ -10,6 +10,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include "sdm670.dtsi"
@@ -32,6 +33,14 @@
 
 	aliases { };
 
+	battery: battery {
+		compatible = "simple-battery";
+
+		voltage-min-design-microvolt = <3312000>;
+		voltage-max-design-microvolt = <4400000>;
+		charge-full-design-microamp-hours = <3000000>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 
@@ -49,20 +58,6 @@
 		};
 	};
 
-	clocks {
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32764>;
-		};
-
-		xo_board: xo-board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <38400000>;
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -407,6 +402,15 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm670/sargo/a615_zap.mbn";
+	};
+};
+
 &i2c9 {
 	clock-frequency = <100000>;
 	status = "okay";
@@ -441,6 +445,69 @@
 	};
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l1a_1p225>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,s6e3fa7-ams559nk06";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default>;
+
+		power-supply = <&vreg_l6b_3p3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1b_0p925>;
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
+&pm660_charger {
+	monitored-battery = <&battery>;
+	status = "okay";
+};
+
+&pm660_rradc {
+	status = "okay";
+};
+
+&pm660l_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>, <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &pm660l_gpios {
 	vol_up_pin: vol-up-state {
 		pins = "gpio7";
@@ -481,6 +548,29 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
+	panel_default: panel-default-state {
+		te-pins {
+			pins = "gpio10";
+			function = "mdp_vsync";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		reset-pins {
+			pins = "gpio75";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		mode-pins {
+			pins = "gpio76";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
 	touchscreen_default: ts-default-state {
 		ts-reset-pins {
 			pins = "gpio99";
diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
index ba2043d67370..c33f3de779f6 100644
--- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -6,7 +6,11 @@
  * Copyright (c) 2022, Richard Acayan. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -27,11 +31,25 @@
 
 	chosen { };
 
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+		};
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x0>;
@@ -42,15 +60,15 @@
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
+			next-level-cache = <&l2_0>;
+			l2_0: l2-cache {
 				compatible = "cache";
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 				cache-level = <2>;
 				cache-unified;
-				L3_0: l3-cache {
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -58,7 +76,7 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x100>;
@@ -69,18 +87,18 @@
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_100>;
-			L2_100: l2-cache {
+			next-level-cache = <&l2_100>;
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x200>;
@@ -91,18 +109,18 @@
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_200>;
-			L2_200: l2-cache {
+			next-level-cache = <&l2_200>;
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x300>;
@@ -113,18 +131,18 @@
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_300>;
-			L2_300: l2-cache {
+			next-level-cache = <&l2_300>;
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x400>;
@@ -135,18 +153,18 @@
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_400>;
-			L2_400: l2-cache {
+			next-level-cache = <&l2_400>;
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x500>;
@@ -157,18 +175,18 @@
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_500>;
-			L2_500: l2-cache {
+			next-level-cache = <&l2_500>;
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x600>;
@@ -179,18 +197,18 @@
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_600>;
-			L2_600: l2-cache {
+			next-level-cache = <&l2_600>;
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x700>;
@@ -201,49 +219,49 @@
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_700>;
-			L2_700: l2-cache {
+			next-level-cache = <&l2_700>;
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -251,7 +269,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -261,7 +279,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -273,7 +291,7 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			cluster_sleep_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c244>;
 				entry-latency-us = <3263>;
@@ -400,61 +418,85 @@
 		};
 	};
 
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-180000000 {
+			opp-hz = /bits/ 64 <180000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CLUSTER_PD: power-domain-cluster {
+		cluster_pd: power-domain-cluster {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			domain-idle-states = <&cluster_sleep_0>;
 		};
 	};
 
@@ -484,6 +526,18 @@
 			no-map;
 		};
 
+		smem@86000000 {
+			compatible = "qcom,smem";
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		tz_mem: tz@86200000 {
+			reg = <0 0x86200000 0 0x2d00000>;
+			no-map;
+		};
+
 		camera_mem: camera-mem@8ab00000 {
 			reg = <0 0x8ab00000 0 0x500000>;
 			no-map;
@@ -580,6 +634,11 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			gpu_speed_bin: gpu_speed_bin@1a2 {
+				reg = <0x1a2 0x2>;
+				bits = <5 8>;
+			};
+
 			qusb2_hstx_trim: hstx-trim@1eb {
 				reg = <0x1eb 0x1>;
 				bits = <1 4>;
@@ -1114,6 +1173,12 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
 		tlmm: pinctrl@3400000 {
 			compatible = "qcom,sdm670-tlmm";
 			reg = <0 0x03400000 0 0xc00000>;
@@ -1125,6 +1190,34 @@
 			gpio-ranges = <&tlmm 0 0 151>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			qup_i2c0_default: qup-i2c0-default-state {
 				pins = "gpio0", "gpio1";
 				function = "qup0";
@@ -1256,6 +1349,180 @@
 			};
 		};
 
+		gpu: gpu@5000000 {
+			compatible = "qcom,adreno-615.0", "qcom,adreno";
+
+			reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x10>;
+			reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+
+			/*
+			 * Look ma, no clocks! The GPU clocks and power are
+			 * controlled entirely by the GMU
+			 */
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			interconnects = <&mem_noc MASTER_GRAPHICS_3D 0 &mem_noc SLAVE_EBI_CH0 0>;
+			interconnect-names = "gfx-mem";
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-780000000 {
+					opp-hz = /bits/ 64 <780000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0x8>;
+				};
+
+				opp-750000000 {
+					opp-hz = /bits/ 64 <750000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0x8>;
+				};
+
+				opp-700000000 {
+					opp-hz = /bits/ 64 <700000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0x4>;
+				};
+
+				opp-650000000 {
+					opp-hz = /bits/ 64 <650000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0xc>;
+				};
+
+				opp-565000000 {
+					opp-hz = /bits/ 64 <565000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0xc>;
+				};
+
+				opp-504000000 {
+					opp-hz = /bits/ 64 <504000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0x2>;
+				};
+
+				opp-430000000 {
+					opp-hz = /bits/ 64 <430000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-355000000 {
+					opp-hz = /bits/ 64 <355000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <6220000>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-267000000 {
+					opp-hz = /bits/ 64 <267000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <4068000>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-180000000 {
+					opp-hz = /bits/ 64 <180000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					opp-peak-kBps = <1804000>;
+					opp-supported-hw = <0xf>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@5040000 {
+			compatible = "qcom,sdm670-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
+			reg = <0 0x05040000 0 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_CFG_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+		};
+
+		gmu: gmu@506a000 {
+			compatible = "qcom,adreno-gmu-615.0", "qcom,adreno-gmu";
+
+			reg = <0 0x0506a000 0 0x30000>,
+			      <0 0x0b280000 0 0x10000>,
+			      <0 0x0b480000 0 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@5090000 {
+			compatible = "qcom,sdm845-gpucc";
+			reg = <0 0x05090000 0 0x9000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+		};
+
 		usb_1_hsphy: phy@88e2000 {
 			compatible = "qcom,sdm670-qusb2-phy", "qcom,qusb2-v2-phy";
 			reg = <0 0x088e2000 0 0x400>;
@@ -1295,12 +1562,16 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -1353,6 +1624,452 @@
 			#interrupt-cells = <4>;
 		};
 
+		cci: cci@ac4a000 {
+			compatible = "qcom,sdm670-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac4a000 0 0x4000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SOC_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_CLK>;
+			clock-names = "camnoc_axi",
+				      "soc_ahb",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: isp@acb3000 {
+			compatible = "qcom,sdm670-camss";
+			reg = <0 0x0acb3000 0 0x1000>,
+			      <0 0x0acba000 0 0x1000>,
+			      <0 0x0acc8000 0 0x1000>,
+			      <0 0x0ac65000 0 0x1000>,
+			      <0 0x0ac66000 0 0x1000>,
+			      <0 0x0ac67000 0 0x1000>,
+			      <0 0x0acaf000 0 0x4000>,
+			      <0 0x0acb6000 0 0x4000>,
+			      <0 0x0acc4000 0 0x4000>;
+			reg-names = "csid0",
+				    "csid1",
+				    "csid2",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "vfe0",
+				    "vfe1",
+				    "vfe_lite";
+
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "vfe0",
+					  "vfe1",
+					  "vfe_lite";
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_1_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&gcc GCC_CAMERA_AXI_CLK>,
+				 <&camcc CAM_CC_SOC_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "csi0",
+				      "csi1",
+				      "csi2",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "gcc_camera_ahb",
+				      "gcc_camera_axi",
+				      "soc_ahb",
+				      "vfe0",
+				      "vfe0_axi",
+				      "vfe0_cphy_rx",
+				      "vfe1",
+				      "vfe1_axi",
+				      "vfe1_cphy_rx",
+				      "vfe_lite",
+				      "vfe_lite_cphy_rx";
+
+			iommus = <&apps_smmu 0x808 0x0>,
+				 <&apps_smmu 0x810 0x8>,
+				 <&apps_smmu 0xc08 0x0>,
+				 <&apps_smmu 0xc10 0x8>;
+
+			power-domains = <&camcc IFE_0_GDSC>,
+					<&camcc IFE_1_GDSC>,
+					<&camcc TITAN_TOP_GDSC>;
+			power-domain-names = "ife0",
+					     "ife1",
+					     "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					camss_endpoint0: endpoint {
+						status = "disabled";
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					camss_endpoint1: endpoint {
+						status = "disabled";
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					camss_endpoint2: endpoint {
+						status = "disabled";
+					};
+				};
+			};
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sdm670-camcc", "qcom,sdm845-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sdm670-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x880 0x8>,
+				 <&apps_smmu 0xc80 0x8>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sdm670-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x3000>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-430000000 {
+						opp-hz = /bits/ 64 <430000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96a00 0 0x10e>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sdm845-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_link_clk_divsel_ten",
+				      "dp_vco_divided_clk_src_mux";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x80000>;
@@ -1423,6 +2140,7 @@
 				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 		};
 
 		gladiator_noc: interconnect@17900000 {
@@ -1448,7 +2166,7 @@
 					  <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>,
 					  <CONTROL_TCS 1>;
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
@@ -1532,7 +2250,7 @@
 		};
 
 		cpufreq_hw: cpufreq@17d43000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sdm670-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
 			reg-names = "freq-domain0", "freq-domain1";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
deleted file mode 100644
index bd7c25bb8d35..000000000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza board device tree source
- *
- * Copyright 2018 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sdm845-cheza.dtsi"
-
-/ {
-	model = "Google Cheza (rev1)";
-	compatible = "google,cheza-rev1", "qcom,sdm845";
-
-	/*
-	 * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
-	 */
-
-	/*
-	 * NOTE: Technically pp3500_a is not the exact same signal as
-	 * pp3500_a_vbob (there's a load switch between them and the EC can
-	 * control pp3500_a via "en_pp3300_a"), but from the AP's point of
-	 * view they are the same.
-	 */
-	pp3500_a:
-	pp3500_a_vbob: pp3500-a-vbob-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bob";
-
-		/*
-		 * Comes on automatically when pp5000_ldo comes on, which
-		 * comes on automatically when ppvar_sys comes on
-		 */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3500000>;
-		regulator-max-microvolt = <3500000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp3300_dx_edp: pp3300-dx-edp-regulator {
-		/* Yes, it's really 3.5 despite the name of the signal */
-		regulator-min-microvolt = <3500000>;
-		regulator-max-microvolt = <3500000>;
-
-		vin-supply = <&pp3500_a>;
-	};
-};
-
-/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
-
-/*
- * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
- * that limits them to 3.0, and trying to run at 3.3V with that old firmware
- * prevents the system from booting.
- */
-&src_pp3000_l19a {
-	regulator-min-microvolt = <3008000>;
-	regulator-max-microvolt = <3008000>;
-};
-
-&src_pp3300_l22a {
-	/delete-property/regulator-boot-on;
-	/delete-property/regulator-always-on;
-};
-
-&src_pp3300_l28a {
-	regulator-min-microvolt = <3008000>;
-	regulator-max-microvolt = <3008000>;
-};
-
-&src_vreg_bob {
-	regulator-min-microvolt = <3500000>;
-	regulator-max-microvolt = <3500000>;
-	vin-supply = <&pp3500_a_vbob>;
-};
-
-/*
- * NON-REGULATOR OVERRIDES
- * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
- */
-
-/* PINCTRL - board-specific pinctrl */
-
-&tlmm {
-	gpio-line-names = "AP_SPI_FP_MISO",
-			  "AP_SPI_FP_MOSI",
-			  "AP_SPI_FP_CLK",
-			  "AP_SPI_FP_CS_L",
-			  "UART_AP_TX_DBG_RX",
-			  "UART_DBG_TX_AP_RX",
-			  "",
-			  "FP_RST_L",
-			  "FCAM_EN",
-			  "",
-			  "EDP_BRIJ_IRQ",
-			  "EC_IN_RW_ODL",
-			  "",
-			  "RCAM_MCLK",
-			  "FCAM_MCLK",
-			  "",
-			  "RCAM_EN",
-			  "CCI0_SDA",
-			  "CCI0_SCL",
-			  "CCI1_SDA",
-			  "CCI1_SCL",
-			  "FCAM_RST_L",
-			  "",
-			  "PEN_RST_L",
-			  "PEN_IRQ_L",
-			  "",
-			  "RCAM_VSYNC",
-			  "ESIM_MISO",
-			  "ESIM_MOSI",
-			  "ESIM_CLK",
-			  "ESIM_CS_L",
-			  "AP_PEN_1V8_SDA",
-			  "AP_PEN_1V8_SCL",
-			  "AP_TS_I2C_SDA",
-			  "AP_TS_I2C_SCL",
-			  "RCAM_RST_L",
-			  "",
-			  "AP_EDP_BKLTEN",
-			  "AP_BRD_ID1",
-			  "BOOT_CONFIG_4",
-			  "AMP_IRQ_L",
-			  "EDP_BRIJ_I2C_SDA",
-			  "EDP_BRIJ_I2C_SCL",
-			  "EN_PP3300_DX_EDP",
-			  "SD_CD_ODL",
-			  "BT_UART_RTS",
-			  "BT_UART_CTS",
-			  "BT_UART_RXD",
-			  "BT_UART_TXD",
-			  "AMP_I2C_SDA",
-			  "AMP_I2C_SCL",
-			  "AP_BRD_ID3",
-			  "",
-			  "AP_EC_SPI_CLK",
-			  "AP_EC_SPI_CS_L",
-			  "AP_EC_SPI_MISO",
-			  "AP_EC_SPI_MOSI",
-			  "FORCED_USB_BOOT",
-			  "AMP_BCLK",
-			  "AMP_LRCLK",
-			  "AMP_DOUT",
-			  "AMP_DIN",
-			  "AP_BRD_ID2",
-			  "PEN_PDCT_L",
-			  "HP_MCLK",
-			  "HP_BCLK",
-			  "HP_LRCLK",
-			  "HP_DOUT",
-			  "HP_DIN",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "BT_SLIMBUS_DATA",
-			  "BT_SLIMBUS_CLK",
-			  "AMP_RESET_L",
-			  "",
-			  "FCAM_VSYNC",
-			  "",
-			  "AP_SKU_ID1",
-			  "EC_WOV_BCLK",
-			  "EC_WOV_LRCLK",
-			  "EC_WOV_DOUT",
-			  "",
-			  "",
-			  "AP_H1_SPI_MISO",
-			  "AP_H1_SPI_MOSI",
-			  "AP_H1_SPI_CLK",
-			  "AP_H1_SPI_CS_L",
-			  "",
-			  "AP_SPI_CS0_L",
-			  "AP_SPI_MOSI",
-			  "AP_SPI_MISO",
-			  "",
-			  "",
-			  "AP_SPI_CLK",
-			  "",
-			  "RFFE6_CLK",
-			  "RFFE6_DATA",
-			  "BOOT_CONFIG_1",
-			  "BOOT_CONFIG_2",
-			  "BOOT_CONFIG_0",
-			  "EDP_BRIJ_EN",
-			  "",
-			  "USB_HS_TX_EN",
-			  "UIM2_DATA",
-			  "UIM2_CLK",
-			  "UIM2_RST",
-			  "UIM2_PRESENT",
-			  "UIM1_DATA",
-			  "UIM1_CLK",
-			  "UIM1_RST",
-			  "",
-			  "AP_SKU_ID2",
-			  "SDM_GRFC_8",
-			  "SDM_GRFC_9",
-			  "AP_RST_REQ",
-			  "HP_IRQ",
-			  "TS_RESET_L",
-			  "PEN_EJECT_ODL",
-			  "HUB_RST_L",
-			  "FP_TO_AP_IRQ",
-			  "AP_EC_INT_L",
-			  "",
-			  "",
-			  "TS_INT_L",
-			  "AP_SUSPEND_L",
-			  "SDM_GRFC_3",
-			  "",
-			  "H1_AP_INT_ODL",
-			  "QLINK_REQ",
-			  "QLINK_EN",
-			  "SDM_GRFC_2",
-			  "BOOT_CONFIG_3",
-			  "WMSS_RESET_L",
-			  "SDM_GRFC_0",
-			  "SDM_GRFC_1",
-			  "RFFE3_DATA",
-			  "RFFE3_CLK",
-			  "RFFE4_DATA",
-			  "RFFE4_CLK",
-			  "RFFE5_DATA",
-			  "RFFE5_CLK",
-			  "GNSS_EN",
-			  "WCI2_LTE_COEX_RXD",
-			  "WCI2_LTE_COEX_TXD",
-			  "AP_RAM_ID1",
-			  "AP_RAM_ID2",
-			  "RFFE1_DATA",
-			  "RFFE1_CLK";
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
deleted file mode 100644
index 2b7230594ecb..000000000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza board device tree source
- *
- * Copyright 2018 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sdm845-cheza.dtsi"
-
-/ {
-	model = "Google Cheza (rev2)";
-	compatible = "google,cheza-rev2", "qcom,sdm845";
-
-	/*
-	 * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
-	 */
-
-	/*
-	 * NOTE: Technically pp3500_a is not the exact same signal as
-	 * pp3500_a_vbob (there's a load switch between them and the EC can
-	 * control pp3500_a via "en_pp3300_a"), but from the AP's point of
-	 * view they are the same.
-	 */
-	pp3500_a:
-	pp3500_a_vbob: pp3500-a-vbob-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bob";
-
-		/*
-		 * Comes on automatically when pp5000_ldo comes on, which
-		 * comes on automatically when ppvar_sys comes on
-		 */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3500000>;
-		regulator-max-microvolt = <3500000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp3300_dx_edp: pp3300-dx-edp-regulator {
-		/* Yes, it's really 3.5 despite the name of the signal */
-		regulator-min-microvolt = <3500000>;
-		regulator-max-microvolt = <3500000>;
-
-		vin-supply = <&pp3500_a>;
-	};
-};
-
-/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
-
-/*
- * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
- * that limits them to 3.0, and trying to run at 3.3V with that old firmware
- * prevents the system from booting.
- */
-&src_pp3000_l19a {
-	regulator-min-microvolt = <3008000>;
-	regulator-max-microvolt = <3008000>;
-};
-
-&src_pp3300_l22a {
-	/delete-property/regulator-boot-on;
-	/delete-property/regulator-always-on;
-};
-
-&src_pp3300_l28a {
-	regulator-min-microvolt = <3008000>;
-	regulator-max-microvolt = <3008000>;
-};
-
-&src_vreg_bob {
-	regulator-min-microvolt = <3500000>;
-	regulator-max-microvolt = <3500000>;
-	vin-supply = <&pp3500_a_vbob>;
-};
-
-/*
- * NON-REGULATOR OVERRIDES
- * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
- */
-
-/* PINCTRL - board-specific pinctrl */
-
-&tlmm {
-	gpio-line-names = "AP_SPI_FP_MISO",
-			  "AP_SPI_FP_MOSI",
-			  "AP_SPI_FP_CLK",
-			  "AP_SPI_FP_CS_L",
-			  "UART_AP_TX_DBG_RX",
-			  "UART_DBG_TX_AP_RX",
-			  "BRIJ_SUSPEND",
-			  "FP_RST_L",
-			  "FCAM_EN",
-			  "",
-			  "EDP_BRIJ_IRQ",
-			  "EC_IN_RW_ODL",
-			  "",
-			  "RCAM_MCLK",
-			  "FCAM_MCLK",
-			  "",
-			  "RCAM_EN",
-			  "CCI0_SDA",
-			  "CCI0_SCL",
-			  "CCI1_SDA",
-			  "CCI1_SCL",
-			  "FCAM_RST_L",
-			  "FPMCU_BOOT0",
-			  "PEN_RST_L",
-			  "PEN_IRQ_L",
-			  "FPMCU_SEL_OD",
-			  "RCAM_VSYNC",
-			  "ESIM_MISO",
-			  "ESIM_MOSI",
-			  "ESIM_CLK",
-			  "ESIM_CS_L",
-			  "AP_PEN_1V8_SDA",
-			  "AP_PEN_1V8_SCL",
-			  "AP_TS_I2C_SDA",
-			  "AP_TS_I2C_SCL",
-			  "RCAM_RST_L",
-			  "",
-			  "AP_EDP_BKLTEN",
-			  "AP_BRD_ID1",
-			  "BOOT_CONFIG_4",
-			  "AMP_IRQ_L",
-			  "EDP_BRIJ_I2C_SDA",
-			  "EDP_BRIJ_I2C_SCL",
-			  "EN_PP3300_DX_EDP",
-			  "SD_CD_ODL",
-			  "BT_UART_RTS",
-			  "BT_UART_CTS",
-			  "BT_UART_RXD",
-			  "BT_UART_TXD",
-			  "AMP_I2C_SDA",
-			  "AMP_I2C_SCL",
-			  "AP_BRD_ID3",
-			  "",
-			  "AP_EC_SPI_CLK",
-			  "AP_EC_SPI_CS_L",
-			  "AP_EC_SPI_MISO",
-			  "AP_EC_SPI_MOSI",
-			  "FORCED_USB_BOOT",
-			  "AMP_BCLK",
-			  "AMP_LRCLK",
-			  "AMP_DOUT",
-			  "AMP_DIN",
-			  "AP_BRD_ID2",
-			  "PEN_PDCT_L",
-			  "HP_MCLK",
-			  "HP_BCLK",
-			  "HP_LRCLK",
-			  "HP_DOUT",
-			  "HP_DIN",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "BT_SLIMBUS_DATA",
-			  "BT_SLIMBUS_CLK",
-			  "AMP_RESET_L",
-			  "",
-			  "FCAM_VSYNC",
-			  "",
-			  "AP_SKU_ID1",
-			  "EC_WOV_BCLK",
-			  "EC_WOV_LRCLK",
-			  "EC_WOV_DOUT",
-			  "",
-			  "",
-			  "AP_H1_SPI_MISO",
-			  "AP_H1_SPI_MOSI",
-			  "AP_H1_SPI_CLK",
-			  "AP_H1_SPI_CS_L",
-			  "",
-			  "AP_SPI_CS0_L",
-			  "AP_SPI_MOSI",
-			  "AP_SPI_MISO",
-			  "",
-			  "",
-			  "AP_SPI_CLK",
-			  "",
-			  "RFFE6_CLK",
-			  "RFFE6_DATA",
-			  "BOOT_CONFIG_1",
-			  "BOOT_CONFIG_2",
-			  "BOOT_CONFIG_0",
-			  "EDP_BRIJ_EN",
-			  "",
-			  "USB_HS_TX_EN",
-			  "UIM2_DATA",
-			  "UIM2_CLK",
-			  "UIM2_RST",
-			  "UIM2_PRESENT",
-			  "UIM1_DATA",
-			  "UIM1_CLK",
-			  "UIM1_RST",
-			  "",
-			  "AP_SKU_ID2",
-			  "SDM_GRFC_8",
-			  "SDM_GRFC_9",
-			  "AP_RST_REQ",
-			  "HP_IRQ",
-			  "TS_RESET_L",
-			  "PEN_EJECT_ODL",
-			  "HUB_RST_L",
-			  "FP_TO_AP_IRQ",
-			  "AP_EC_INT_L",
-			  "",
-			  "",
-			  "TS_INT_L",
-			  "AP_SUSPEND_L",
-			  "SDM_GRFC_3",
-			  "",
-			  "H1_AP_INT_ODL",
-			  "QLINK_REQ",
-			  "QLINK_EN",
-			  "SDM_GRFC_2",
-			  "BOOT_CONFIG_3",
-			  "WMSS_RESET_L",
-			  "SDM_GRFC_0",
-			  "SDM_GRFC_1",
-			  "RFFE3_DATA",
-			  "RFFE3_CLK",
-			  "RFFE4_DATA",
-			  "RFFE4_CLK",
-			  "RFFE5_DATA",
-			  "RFFE5_CLK",
-			  "GNSS_EN",
-			  "WCI2_LTE_COEX_RXD",
-			  "WCI2_LTE_COEX_TXD",
-			  "AP_RAM_ID1",
-			  "AP_RAM_ID2",
-			  "RFFE1_DATA",
-			  "RFFE1_CLK";
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
deleted file mode 100644
index 1ba67be08f81..000000000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza board device tree source
- *
- * Copyright 2018 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sdm845-cheza.dtsi"
-
-/ {
-	model = "Google Cheza (rev3+)";
-	compatible = "google,cheza", "qcom,sdm845";
-};
-
-/* PINCTRL - board-specific pinctrl */
-
-&tlmm {
-	gpio-line-names = "AP_SPI_FP_MISO",
-			  "AP_SPI_FP_MOSI",
-			  "AP_SPI_FP_CLK",
-			  "AP_SPI_FP_CS_L",
-			  "UART_AP_TX_DBG_RX",
-			  "UART_DBG_TX_AP_RX",
-			  "BRIJ_SUSPEND",
-			  "FP_RST_L",
-			  "FCAM_EN",
-			  "",
-			  "EDP_BRIJ_IRQ",
-			  "EC_IN_RW_ODL",
-			  "",
-			  "RCAM_MCLK",
-			  "FCAM_MCLK",
-			  "",
-			  "RCAM_EN",
-			  "CCI0_SDA",
-			  "CCI0_SCL",
-			  "CCI1_SDA",
-			  "CCI1_SCL",
-			  "FCAM_RST_L",
-			  "FPMCU_BOOT0",
-			  "PEN_RST_L",
-			  "PEN_IRQ_L",
-			  "FPMCU_SEL_OD",
-			  "RCAM_VSYNC",
-			  "ESIM_MISO",
-			  "ESIM_MOSI",
-			  "ESIM_CLK",
-			  "ESIM_CS_L",
-			  "AP_PEN_1V8_SDA",
-			  "AP_PEN_1V8_SCL",
-			  "AP_TS_I2C_SDA",
-			  "AP_TS_I2C_SCL",
-			  "RCAM_RST_L",
-			  "",
-			  "AP_EDP_BKLTEN",
-			  "AP_BRD_ID0",
-			  "BOOT_CONFIG_4",
-			  "AMP_IRQ_L",
-			  "EDP_BRIJ_I2C_SDA",
-			  "EDP_BRIJ_I2C_SCL",
-			  "EN_PP3300_DX_EDP",
-			  "SD_CD_ODL",
-			  "BT_UART_RTS",
-			  "BT_UART_CTS",
-			  "BT_UART_RXD",
-			  "BT_UART_TXD",
-			  "AMP_I2C_SDA",
-			  "AMP_I2C_SCL",
-			  "AP_BRD_ID2",
-			  "",
-			  "AP_EC_SPI_CLK",
-			  "AP_EC_SPI_CS_L",
-			  "AP_EC_SPI_MISO",
-			  "AP_EC_SPI_MOSI",
-			  "FORCED_USB_BOOT",
-			  "AMP_BCLK",
-			  "AMP_LRCLK",
-			  "AMP_DOUT",
-			  "AMP_DIN",
-			  "AP_BRD_ID1",
-			  "PEN_PDCT_L",
-			  "HP_MCLK",
-			  "HP_BCLK",
-			  "HP_LRCLK",
-			  "HP_DOUT",
-			  "HP_DIN",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "BT_SLIMBUS_DATA",
-			  "BT_SLIMBUS_CLK",
-			  "AMP_RESET_L",
-			  "",
-			  "FCAM_VSYNC",
-			  "",
-			  "AP_SKU_ID0",
-			  "EC_WOV_BCLK",
-			  "EC_WOV_LRCLK",
-			  "EC_WOV_DOUT",
-			  "",
-			  "",
-			  "AP_H1_SPI_MISO",
-			  "AP_H1_SPI_MOSI",
-			  "AP_H1_SPI_CLK",
-			  "AP_H1_SPI_CS_L",
-			  "",
-			  "AP_SPI_CS0_L",
-			  "AP_SPI_MOSI",
-			  "AP_SPI_MISO",
-			  "",
-			  "",
-			  "AP_SPI_CLK",
-			  "",
-			  "RFFE6_CLK",
-			  "RFFE6_DATA",
-			  "BOOT_CONFIG_1",
-			  "BOOT_CONFIG_2",
-			  "BOOT_CONFIG_0",
-			  "EDP_BRIJ_EN",
-			  "",
-			  "USB_HS_TX_EN",
-			  "UIM2_DATA",
-			  "UIM2_CLK",
-			  "UIM2_RST",
-			  "UIM2_PRESENT",
-			  "UIM1_DATA",
-			  "UIM1_CLK",
-			  "UIM1_RST",
-			  "",
-			  "AP_SKU_ID1",
-			  "SDM_GRFC_8",
-			  "SDM_GRFC_9",
-			  "AP_RST_REQ",
-			  "HP_IRQ",
-			  "TS_RESET_L",
-			  "PEN_EJECT_ODL",
-			  "HUB_RST_L",
-			  "FP_TO_AP_IRQ",
-			  "AP_EC_INT_L",
-			  "",
-			  "",
-			  "TS_INT_L",
-			  "AP_SUSPEND_L",
-			  "SDM_GRFC_3",
-			  /*
-			   * AP_FLASH_WP_L is crossystem ABI. Rev3 schematics
-			   * call it BIOS_FLASH_WP_R_L.
-			   */
-			  "AP_FLASH_WP_L",
-			  "H1_AP_INT_ODL",
-			  "QLINK_REQ",
-			  "QLINK_EN",
-			  "SDM_GRFC_2",
-			  "BOOT_CONFIG_3",
-			  "WMSS_RESET_L",
-			  "SDM_GRFC_0",
-			  "SDM_GRFC_1",
-			  "RFFE3_DATA",
-			  "RFFE3_CLK",
-			  "RFFE4_DATA",
-			  "RFFE4_CLK",
-			  "RFFE5_DATA",
-			  "RFFE5_CLK",
-			  "GNSS_EN",
-			  "WCI2_LTE_COEX_RXD",
-			  "WCI2_LTE_COEX_TXD",
-			  "AP_RAM_ID0",
-			  "AP_RAM_ID1",
-			  "RFFE1_DATA",
-			  "RFFE1_CLK";
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
deleted file mode 100644
index 0ab5e8f53ac9..000000000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ /dev/null
@@ -1,1333 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza device tree source (common between revisions)
- *
- * Copyright 2018 Google LLC.
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sdm845.dtsi"
-
-/* PMICs depend on spmi_bus label and so must come after SoC */
-#include "pm8005.dtsi"
-#include "pm8998.dtsi"
-
-/ {
-	aliases {
-		bluetooth0 = &bluetooth;
-		serial1 = &uart6;
-		serial0 = &uart9;
-		wifi0 = &wifi;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&cros_ec_pwm 0>;
-		enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-		power-supply = <&ppvar_sys>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ap_edp_bklten>;
-	};
-
-	/* FIXED REGULATORS - parents above children */
-
-	/* This is the top level supply and variable voltage */
-	ppvar_sys: ppvar-sys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "ppvar_sys";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/* This divides ppvar_sys by 2, so voltage is variable */
-	src_vph_pwr: src-vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "src_vph_pwr";
-
-		/* EC turns on with switchcap_on_l; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp5000_a: pp5000-a-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "pp5000_a";
-
-		/* EC turns on with en_pp5000_a; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	src_vreg_bob: src-vreg-bob-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "src_vreg_bob";
-
-		/* EC turns on with vbob_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp3300_dx_edp: pp3300-dx-edp-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3300_dx_edp";
-
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&en_pp3300_dx_edp>;
-	};
-
-	/*
-	 * Apparently RPMh does not provide support for PM8998 S4 because it
-	 * is always-on; model it as a fixed regulator.
-	 */
-	src_pp1800_s4a: pm8998-smps4 {
-		compatible = "regulator-fixed";
-		regulator-name = "src_pp1800_s4a";
-
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&src_vph_pwr>;
-	};
-
-	/* BOARD-SPECIFIC TOP LEVEL NODES */
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pen_eject_odl>;
-
-		switch-pen-insert {
-			label = "Pen Insert";
-			/* Insert = low, eject = high */
-			gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
-			linux,code = <SW_PEN_INSERTED>;
-			linux,input-type = <EV_SW>;
-			wakeup-source;
-		};
-	};
-
-	panel: panel {
-		compatible = "innolux,p120zdg-bf1";
-		power-supply = <&pp3300_dx_edp>;
-		backlight = <&backlight>;
-		no-hpd;
-
-		panel_in: port {
-			panel_in_edp: endpoint {
-				remote-endpoint = <&sn65dsi86_out>;
-			};
-		};
-	};
-};
-
-&cpufreq_hw {
-	/delete-property/ interrupts-extended; /* reference to lmh_cluster[01] */
-};
-
-&psci {
-	/delete-node/ power-domain-cpu0;
-	/delete-node/ power-domain-cpu1;
-	/delete-node/ power-domain-cpu2;
-	/delete-node/ power-domain-cpu3;
-	/delete-node/ power-domain-cpu4;
-	/delete-node/ power-domain-cpu5;
-	/delete-node/ power-domain-cpu6;
-	/delete-node/ power-domain-cpu7;
-	/delete-node/ power-domain-cluster;
-};
-
-&cpus {
-	/delete-node/ domain-idle-states;
-};
-
-&cpu_idle_states {
-	LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
-		compatible = "arm,idle-state";
-		idle-state-name = "little-power-down";
-		arm,psci-suspend-param = <0x40000003>;
-		entry-latency-us = <350>;
-		exit-latency-us = <461>;
-		min-residency-us = <1890>;
-		local-timer-stop;
-	};
-
-	LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
-		compatible = "arm,idle-state";
-		idle-state-name = "little-rail-power-down";
-		arm,psci-suspend-param = <0x40000004>;
-		entry-latency-us = <360>;
-		exit-latency-us = <531>;
-		min-residency-us = <3934>;
-		local-timer-stop;
-	};
-
-	BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
-		compatible = "arm,idle-state";
-		idle-state-name = "big-power-down";
-		arm,psci-suspend-param = <0x40000003>;
-		entry-latency-us = <264>;
-		exit-latency-us = <621>;
-		min-residency-us = <952>;
-		local-timer-stop;
-	};
-
-	BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
-		compatible = "arm,idle-state";
-		idle-state-name = "big-rail-power-down";
-		arm,psci-suspend-param = <0x40000004>;
-		entry-latency-us = <702>;
-		exit-latency-us = <1061>;
-		min-residency-us = <4488>;
-		local-timer-stop;
-	};
-
-	CLUSTER_SLEEP_0: cluster-sleep-0 {
-		compatible = "arm,idle-state";
-		idle-state-name = "cluster-power-down";
-		arm,psci-suspend-param = <0x400000F4>;
-		entry-latency-us = <3263>;
-		exit-latency-us = <6562>;
-		min-residency-us = <9987>;
-		local-timer-stop;
-	};
-};
-
-&CPU0 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
-};
-
-&CPU1 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
-};
-
-&CPU2 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
-};
-
-&CPU3 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
-};
-
-&CPU4 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&BIG_CPU_SLEEP_0
-			   &BIG_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
-};
-
-&CPU5 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&BIG_CPU_SLEEP_0
-			   &BIG_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
-};
-
-&CPU6 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&BIG_CPU_SLEEP_0
-			   &BIG_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
-};
-
-&CPU7 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&BIG_CPU_SLEEP_0
-			   &BIG_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
-};
-
-&lmh_cluster0 {
-	status = "disabled";
-};
-
-&lmh_cluster1 {
-	status = "disabled";
-};
-
-/*
- * Reserved memory changes
- *
- * Putting this all together (out of order with the rest of the file) to keep
- * all modifications to the memory map (from sdm845.dtsi) in one place.
- */
-
-/*
- * Our mpss_region is 8MB bigger than the default one and that conflicts
- * with venus_mem and cdsp_mem.
- *
- * For venus_mem we'll delete and re-create at a different address.
- *
- * cdsp_mem isn't used on cheza right now so we won't bother re-creating it; but
- * that also means we need to delete cdsp_pas.
- */
-/delete-node/ &venus_mem;
-/delete-node/ &cdsp_mem;
-/delete-node/ &cdsp_pas;
-/delete-node/ &gpu_mem;
-
-/* Increase the size from 120 MB to 128 MB */
-&mpss_region {
-	reg = <0 0x8e000000 0 0x8000000>;
-};
-
-/* Increase the size from 2MB to 8MB */
-&rmtfs_mem {
-	reg = <0 0x88f00000 0 0x800000>;
-};
-
-/ {
-	reserved-memory {
-		venus_mem: memory@96000000 {
-			reg = <0 0x96000000 0 0x500000>;
-			no-map;
-		};
-	};
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
-	pinctrl-1 = <&qspi_sleep>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-
-		/*
-		 * In theory chip supports up to 104 MHz and controller up
-		 * to 80 MHz, but above 25 MHz wasn't reliable so we'll use
-		 * that for now.  b:117440651
-		 */
-		spi-max-frequency = <25000000>;
-		spi-tx-bus-width = <2>;
-		spi-rx-bus-width = <2>;
-	};
-};
-
-
-&apps_rsc {
-	/delete-property/ power-domains;
-
-	regulators-0 {
-		compatible = "qcom,pm8998-rpmh-regulators";
-		qcom,pmic-id = "a";
-
-		vdd-s1-supply = <&src_vph_pwr>;
-		vdd-s2-supply = <&src_vph_pwr>;
-		vdd-s3-supply = <&src_vph_pwr>;
-		vdd-s4-supply = <&src_vph_pwr>;
-		vdd-s5-supply = <&src_vph_pwr>;
-		vdd-s6-supply = <&src_vph_pwr>;
-		vdd-s7-supply = <&src_vph_pwr>;
-		vdd-s8-supply = <&src_vph_pwr>;
-		vdd-s9-supply = <&src_vph_pwr>;
-		vdd-s10-supply = <&src_vph_pwr>;
-		vdd-s11-supply = <&src_vph_pwr>;
-		vdd-s12-supply = <&src_vph_pwr>;
-		vdd-s13-supply = <&src_vph_pwr>;
-		vdd-l1-l27-supply = <&src_pp1025_s7a>;
-		vdd-l2-l8-l17-supply = <&src_pp1350_s3a>;
-		vdd-l3-l11-supply = <&src_pp1025_s7a>;
-		vdd-l4-l5-supply = <&src_pp1025_s7a>;
-		vdd-l6-supply = <&src_vph_pwr>;
-		vdd-l7-l12-l14-l15-supply = <&src_pp2040_s5a>;
-		vdd-l9-supply = <&src_pp2040_s5a>;
-		vdd-l10-l23-l25-supply = <&src_vreg_bob>;
-		vdd-l13-l19-l21-supply = <&src_vreg_bob>;
-		vdd-l16-l28-supply = <&src_vreg_bob>;
-		vdd-l18-l22-supply = <&src_vreg_bob>;
-		vdd-l20-l24-supply = <&src_vreg_bob>;
-		vdd-l26-supply = <&src_pp1350_s3a>;
-		vin-lvs-1-2-supply = <&src_pp1800_s4a>;
-
-		src_pp1125_s2a: smps2 {
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-		};
-
-		src_pp1350_s3a: smps3 {
-			regulator-min-microvolt = <1352000>;
-			regulator-max-microvolt = <1352000>;
-		};
-
-		src_pp2040_s5a: smps5 {
-			regulator-min-microvolt = <1904000>;
-			regulator-max-microvolt = <2040000>;
-		};
-
-		src_pp1025_s7a: smps7 {
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1028000>;
-		};
-
-		vdd_qusb_hs0:
-		vdda_hp_pcie_core:
-		vdda_mipi_csi0_0p9:
-		vdda_mipi_csi1_0p9:
-		vdda_mipi_csi2_0p9:
-		vdda_mipi_dsi0_pll:
-		vdda_mipi_dsi1_pll:
-		vdda_qlink_lv:
-		vdda_qlink_lv_ck:
-		vdda_qrefs_0p875:
-		vdda_pcie_core:
-		vdda_pll_cc_ebi01:
-		vdda_pll_cc_ebi23:
-		vdda_sp_sensor:
-		vdda_ufs1_core:
-		vdda_ufs2_core:
-		vdda_usb1_ss_core:
-		vdda_usb2_ss_core:
-		src_pp875_l1a: ldo1 {
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vddpx_10:
-		src_pp1200_l2a: ldo2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-
-			/* TODO: why??? */
-			regulator-always-on;
-		};
-
-		pp1000_l3a_sdr845: ldo3 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdd_wcss_cx:
-		vdd_wcss_mx:
-		vdda_wcss_pll:
-		src_pp800_l5a: ldo5 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vddpx_13:
-		src_pp1800_l6a: ldo6 {
-			regulator-min-microvolt = <1856000>;
-			regulator-max-microvolt = <1856000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1800_l7a_wcn3990: ldo7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1200_l8a: ldo8 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1248000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1800_dx_pen:
-		src_pp1800_l9a: ldo9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1800_l10a: ldo10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1000_l11a_sdr845: ldo11 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1048000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdd_qfprom:
-		vdd_qfprom_sp:
-		vdda_apc1_cs_1p8:
-		vdda_gfx_cs_1p8:
-		vdda_qrefs_1p8:
-		vdda_qusb_hs0_1p8:
-		vddpx_11:
-		src_pp1800_l12a: ldo12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vddpx_2:
-		src_pp2950_l13a: ldo13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1800_l14a: ldo14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1800_l15a: ldo15 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp2700_l16a: ldo16 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2704000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1300_l17a: ldo17 {
-			regulator-min-microvolt = <1304000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp2700_l18a: ldo18 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		/*
-		 * NOTE: this rail should have been called
-		 * src_pp3300_l19a in the schematic
-		 */
-		src_pp3000_l19a: ldo19 {
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp2950_l20a: ldo20 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp2950_l21a: ldo21 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp3300_hub:
-		src_pp3300_l22a: ldo22 {
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			/*
-			 * HACK: Should add a usb hub node and driver
-			 * to turn this on and off at suspend/resume time
-			 */
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		pp3300_l23a_ch1_wcn3990: ldo23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3312000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdda_qusb_hs0_3p1:
-		src_pp3075_l24a: ldo24 {
-			regulator-min-microvolt = <3088000>;
-			regulator-max-microvolt = <3088000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp3300_l25a_ch0_wcn3990: ldo25 {
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1200_hub:
-		vdda_hp_pcie_1p2:
-		vdda_hv_ebi0:
-		vdda_hv_ebi1:
-		vdda_hv_ebi2:
-		vdda_hv_ebi3:
-		vdda_mipi_csi_1p25:
-		vdda_mipi_dsi0_1p2:
-		vdda_mipi_dsi1_1p2:
-		vdda_pcie_1p2:
-		vdda_ufs1_1p2:
-		vdda_ufs2_1p2:
-		vdda_usb1_ss_1p2:
-		vdda_usb2_ss_1p2:
-		src_pp1200_l26a: ldo26 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp3300_dx_pen:
-		src_pp3300_l28a: ldo28 {
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1800_lvs1: lvs1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		src_pp1800_lvs2: lvs2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pm8005-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vdd-s1-supply = <&src_vph_pwr>;
-		vdd-s2-supply = <&src_vph_pwr>;
-		vdd-s3-supply = <&src_vph_pwr>;
-		vdd-s4-supply = <&src_vph_pwr>;
-
-		src_pp600_s3c: smps3 {
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <600000>;
-		};
-	};
-};
-
-edp_brij_i2c: &i2c3 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	sn65dsi86_bridge: bridge@2d {
-		compatible = "ti,sn65dsi86";
-		reg = <0x2d>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_brij_en &edp_brij_irq>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-
-		enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
-
-		vpll-supply = <&src_pp1800_s4a>;
-		vccio-supply = <&src_pp1800_s4a>;
-		vcca-supply = <&src_pp1200_l2a>;
-		vcc-supply = <&src_pp1200_l2a>;
-
-		clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
-		clock-names = "refclk";
-
-		no-hpd;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				sn65dsi86_in: endpoint {
-					remote-endpoint = <&mdss_dsi0_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				sn65dsi86_out: endpoint {
-					remote-endpoint = <&panel_in_edp>;
-				};
-			};
-		};
-	};
-};
-
-ap_pen_1v8: &i2c11 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	digitizer@9 {
-		compatible = "wacom,w9013", "hid-over-i2c";
-		reg = <0x9>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>;
-
-		vdd-supply = <&pp3300_dx_pen>;
-		vddl-supply = <&pp1800_dx_pen>;
-		post-power-on-delay-ms = <100>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-
-		hid-descr-addr = <0x1>;
-	};
-};
-
-amp_i2c: &i2c12 {
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-ap_ts_i2c: &i2c14 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	touchscreen@10 {
-		compatible = "elan,ekth3500";
-		reg = <0x10>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_l &ts_reset_l>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
-
-		vcc33-supply = <&src_pp3300_l28a>;
-
-		reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&gmu {
-	status = "okay";
-};
-
-&gpu {
-	status = "okay";
-};
-
-&ipa {
-	qcom,gsi-loader = "modem";
-	status = "okay";
-};
-
-&lpasscc {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_dsi0 {
-	status = "okay";
-	vdda-supply = <&vdda_mipi_dsi0_1p2>;
-
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&sn65dsi86_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-};
-
-&mdss_dsi0_phy {
-	status = "okay";
-	vdds-supply = <&vdda_mipi_dsi0_pll>;
-};
-
-/*
- * Cheza fw does not properly program the GPU aperture to allow the
- * GPU to update the SMMU pagetables for context switches.  Work
- * around this by dropping the "qcom,adreno-smmu" compat string.
- */
-&adreno_smmu {
-	compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2";
-};
-
-&mss_pil {
-	status = "okay";
-
-	iommus = <&apps_smmu 0x781 0x0>,
-		 <&apps_smmu 0x724 0x3>;
-};
-
-&pm8998_pwrkey {
-	status = "disabled";
-};
-
-&qupv3_id_0 {
-	status = "okay";
-	iommus = <&apps_smmu 0x0 0x3>;
-};
-
-&qupv3_id_1 {
-	status = "okay";
-	iommus = <&apps_smmu 0x6c0 0x3>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>;
-
-	vmmc-supply = <&src_pp2950_l21a>;
-	vqmmc-supply = <&vddpx_2>;
-
-	cd-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
-};
-
-&spi0 {
-	status = "okay";
-};
-
-&spi5 {
-	status = "okay";
-
-	tpm@0 {
-		compatible = "google,cr50";
-		reg = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&h1_ap_int_odl>;
-		spi-max-frequency = <800000>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <129 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&spi10 {
-	status = "okay";
-
-	cros_ec: ec@0 {
-		compatible = "google,cros-ec-spi";
-		reg = <0>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <122 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ec_ap_int_l>;
-		spi-max-frequency = <3000000>;
-
-		cros_ec_pwm: pwm {
-			compatible = "google,cros-ec-pwm";
-			#pwm-cells = <1>;
-		};
-
-		i2c_tunnel: i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			google,remote-bus = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-#include <arm/cros-ec-keyboard.dtsi>
-#include <arm/cros-ec-sbs.dtsi>
-
-&uart6 {
-	status = "okay";
-
-	pinctrl-0 = <&qup_uart6_4pin>;
-
-	bluetooth: bluetooth {
-		compatible = "qcom,wcn3990-bt";
-		vddio-supply = <&src_pp1800_s4a>;
-		vddxo-supply = <&pp1800_l7a_wcn3990>;
-		vddrf-supply = <&src_pp1300_l17a>;
-		vddch0-supply = <&pp3300_l25a_ch0_wcn3990>;
-		max-speed = <3200000>;
-	};
-};
-
-&uart9 {
-	status = "okay";
-};
-
-&ufs_mem_hc {
-	status = "okay";
-
-	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
-
-	vcc-supply = <&src_pp2950_l20a>;
-	vcc-max-microamp = <600000>;
-};
-
-&ufs_mem_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vdda_ufs1_core>;
-	vdda-pll-supply = <&vdda_ufs1_1p2>;
-};
-
-&usb_1 {
-	status = "okay";
-
-	/* We'll use this as USB 2.0 only */
-	qcom,select-utmi-as-pipe-clk;
-};
-
-&usb_1_dwc3 {
-	/*
-	 * The hardware design intends this port to be hooked up in peripheral
-	 * mode, so we'll hardcode it here.  Some details:
-	 * - SDM845 expects only a single Type C connector so it has only one
-	 *   native Type C port but cheza has two Type C connectors.
-	 * - The only source of DP is the single native Type C port.
-	 * - On cheza we want to be able to hook DP up to _either_ of the
-	 *   two Type C connectors and want to be able to achieve 4 lanes of DP.
-	 * - When you configure a Type C port for 4 lanes of DP you lose USB3.
-	 * - In order to make everything work, the native Type C port is always
-	 *   configured as 4-lanes DP so it's always available.
-	 * - The extra USB3 port on SDM845 goes to a USB 3 hub which is then
-	 *   sent to the two Type C connectors.
-	 * - The extra USB2 lines from the native Type C port are always
-	 *   setup as "peripheral" so that we can mux them over to one connector
-	 *   or the other if someone needs the connector configured as a gadget
-	 *   (but they only get USB2 speeds).
-	 *
-	 * All the hardware muxes would allow us to hook things up in different
-	 * ways to some potential benefit for static configurations (you could
-	 * achieve extra USB2 bandwidth by using two different ports for the
-	 * two connectors or possibly even get USB3 peripheral mode), but in
-	 * each case you end up forcing to disconnect/reconnect an in-use
-	 * USB session in some cases depending on what you hotplug into the
-	 * other connector.  Thus hardcoding this as peripheral makes sense.
-	 */
-	dr_mode = "peripheral";
-
-	/*
-	 * We always need the high speed pins as 4-lanes DP in case someone
-	 * hotplugs a DP peripheral.  Thus limit this port to a max of high
-	 * speed.
-	 */
-	maximum-speed = "high-speed";
-
-	/*
-	 * We don't need the usb3-phy since we run in highspeed mode always, so
-	 * re-define these properties removing the superspeed USB PHY reference.
-	 */
-	phys = <&usb_1_hsphy>;
-	phy-names = "usb2-phy";
-};
-
-&usb_1_hsphy {
-	status = "okay";
-
-	vdd-supply = <&vdda_usb1_ss_core>;
-	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
-	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
-
-	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
-	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
-	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
-};
-
-&usb_2 {
-	status = "okay";
-};
-
-&usb_2_dwc3 {
-	/* We have this hooked up to a hub and we always use in host mode */
-	dr_mode = "host";
-};
-
-&usb_2_hsphy {
-	status = "okay";
-
-	vdd-supply = <&vdda_usb2_ss_core>;
-	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
-	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
-
-	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
-};
-
-&usb_2_qmpphy {
-	status = "okay";
-
-	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
-	vdda-pll-supply = <&vdda_usb2_ss_core>;
-};
-
-&wifi {
-	status = "okay";
-
-	vdd-0.8-cx-mx-supply = <&src_pp800_l5a >;
-	vdd-1.8-xo-supply = <&pp1800_l7a_wcn3990>;
-	vdd-1.3-rfa-supply = <&src_pp1300_l17a>;
-	vdd-3.3-ch0-supply = <&pp3300_l25a_ch0_wcn3990>;
-};
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-
-&qspi_cs0 {
-	bias-disable;		/* External pullup */
-};
-
-&qspi_clk {
-	bias-disable;		/* Rely on Cr50 internal pulldown */
-};
-
-&qspi_data0 {
-	bias-disable;		/* Rely on Cr50 internal pulldown */
-};
-
-&qspi_data1 {
-	bias-pull-down;
-};
-
-&qup_i2c3_default {
-	drive-strength = <2>;
-
-	/* Has external pullup */
-	bias-disable;
-};
-
-&qup_i2c11_default {
-	drive-strength = <2>;
-
-	/* Has external pullup */
-	bias-disable;
-};
-
-&qup_i2c12_default {
-	drive-strength = <2>;
-
-	/* Has external pullup */
-	bias-disable;
-};
-
-&qup_i2c14_default {
-	drive-strength = <2>;
-
-	/* Has external pullup */
-	bias-disable;
-};
-
-&qup_spi0_default {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-&qup_spi5_default {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-&qup_spi10_default {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-&qup_uart9_rx {
-	drive-strength = <2>;
-	bias-pull-up;
-};
-
-&qup_uart9_tx {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-/* PINCTRL - board-specific pinctrl */
-&pm8005_gpios {
-	gpio-line-names = "",
-			  "",
-			  "SLB",
-			  "";
-};
-
-&pm8998_adc {
-	channel@4d {
-		reg = <ADC5_AMUX_THM1_100K_PU>;
-		label = "sdm_temp";
-	};
-
-	channel@4e {
-		reg = <ADC5_AMUX_THM2_100K_PU>;
-		label = "quiet_temp";
-	};
-
-	channel@4f {
-		reg = <ADC5_AMUX_THM3_100K_PU>;
-		label = "lte_temp_1";
-	};
-
-	channel@50 {
-		reg = <ADC5_AMUX_THM4_100K_PU>;
-		label = "lte_temp_2";
-	};
-
-	channel@51 {
-		reg = <ADC5_AMUX_THM5_100K_PU>;
-		label = "charger_temp";
-	};
-};
-
-&pm8998_gpios {
-	gpio-line-names = "",
-			  "",
-			  "SW_CTRL",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "CFG_OPT1",
-			  "WCSS_PWR_REQ",
-			  "",
-			  "CFG_OPT2",
-			  "SLB";
-};
-
-&tlmm {
-	/*
-	 * pinctrl settings for pins that have no real owners.
-	 */
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&bios_flash_wp_r_l>,
-		    <&ap_suspend_l_deassert>;
-
-	pinctrl-1 = <&bios_flash_wp_r_l>,
-		    <&ap_suspend_l_assert>;
-
-	/*
-	 * Hogs prevent usermode from changing the value. A GPIO can be both
-	 * here and in the pinctrl section.
-	 */
-	ap-suspend-l-hog {
-		gpio-hog;
-		gpios = <126 GPIO_ACTIVE_LOW>;
-		output-low;
-	};
-
-	ap_edp_bklten: ap-edp-bklten-state {
-		pins = "gpio37";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	bios_flash_wp_r_l: bios-flash-wp-r-l-state {
-		pins = "gpio128";
-		function = "gpio";
-		bias-disable;
-	};
-
-	ec_ap_int_l: ec-ap-int-l-state {
-	       pins = "gpio122";
-	       function = "gpio";
-	       bias-pull-up;
-	};
-
-	edp_brij_en: edp-brij-en-state {
-		pins = "gpio102";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	edp_brij_irq: edp-brij-irq-state {
-		pins = "gpio10";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	en_pp3300_dx_edp: en-pp3300-dx-edp-state {
-		pins = "gpio43";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	h1_ap_int_odl: h1-ap-int-odl-state {
-		pins = "gpio129";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	pen_eject_odl: pen-eject-odl-state {
-		pins = "gpio119";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	pen_irq_l: pen-irq-l-state {
-		pins = "gpio24";
-		function = "gpio";
-
-		/* Has external pullup */
-		bias-disable;
-	};
-
-	pen_pdct_l: pen-pdct-l-state {
-		pins = "gpio63";
-		function = "gpio";
-
-		/* Has external pullup */
-		bias-disable;
-	};
-
-	pen_rst_l: pen-rst-l-state {
-		pins = "gpio23";
-		function = "gpio";
-		bias-disable;
-		drive-strength = <2>;
-
-		/*
-		 * The pen driver doesn't currently support
-		 * driving this reset line.  By specifying
-		 * output-high here we're relying on the fact
-		 * that this pin has a default pulldown at boot
-		 * (which makes sure the pen was in reset if it
-		 * was powered) and then we set it high here to
-		 * take it out of reset.  Better would be if the
-		 * pen driver could control this and we could
-		 * remove "output-high" here.
-		 */
-		output-high;
-	};
-
-	qspi_sleep: qspi-sleep-state {
-		pins = "gpio90", "gpio91", "gpio92", "gpio95";
-
-		/*
-		 * When we're not actively transferring we want pins as GPIOs
-		 * with output disabled so that the quad SPI IP block stops
-		 * driving them. We rely on the normal pulls configured in
-		 * the active state and don't redefine them here. Also note
-		 * that we don't need the reverse (output-enable) in the
-		 * normal mode since the "output-enable" only matters for
-		 * GPIO function.
-		 */
-		function = "gpio";
-		output-disable;
-	};
-
-	sdc2_clk: sdc2-clk-state {
-		pins = "sdc2_clk";
-		bias-disable;
-
-		/*
-		 * It seems that mmc_test reports errors if drive
-		 * strength is not 16.
-		 */
-		drive-strength = <16>;
-	};
-
-	sdc2_cmd: sdc2-cmd-state {
-		pins = "sdc2_cmd";
-		bias-pull-up;
-		drive-strength = <16>;
-	};
-
-	sdc2_data: sdc2-data-state {
-		pins = "sdc2_data";
-		bias-pull-up;
-		drive-strength = <16>;
-	};
-
-	sd_cd_odl: sd-cd-odl-state {
-		pins = "gpio44";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	ts_int_l: ts-int-l-state {
-		pins = "gpio125";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	ts_reset_l: ts-reset-l-state {
-		pins = "gpio118";
-		function = "gpio";
-		bias-disable;
-		drive-strength = <2>;
-	};
-
-	ap_suspend_l_assert: ap-suspend-l-assert-state {
-		pins = "gpio126";
-		function = "gpio";
-		bias-disable;
-		drive-strength = <2>;
-		output-low;
-	};
-
-	ap_suspend_l_deassert: ap-suspend-l-deassert-state {
-		pins = "gpio126";
-		function = "gpio";
-		bias-disable;
-		drive-strength = <2>;
-		output-high;
-	};
-};
-
-&venus {
-	status = "okay";
-
-	video-firmware {
-		iommus = <&apps_smmu 0x10b2 0x0>;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
index a21caa6f3fa2..dbe1911d8e47 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
@@ -4,8 +4,10 @@
  */
 
 /dts-v1/;
+/plugin/;
 
-#include "sdm845-db845c.dts"
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
+#include <dt-bindings/gpio/gpio.h>
 
 &camss {
 	vdda-phy-supply = <&vreg_l1a_0p875>;
@@ -28,6 +30,9 @@
 };
 
 &cci_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	camera@10 {
 		compatible = "ovti,ov8856";
 		reg = <0x10>;
@@ -39,7 +44,8 @@
 
 		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
 		clock-names = "xvclk";
-		clock-frequency = <19200000>;
+		assigned-clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+		assigned-clock-rates = <19200000>;
 
 		/*
 		 * The &vreg_s4a_1p8 trace is powered on as a,
@@ -63,42 +69,3 @@
 		};
 	};
 };
-
-&cci_i2c1 {
-	camera@60 {
-		compatible = "ovti,ov7251";
-
-		/* I2C address as per ov7251.txt linux documentation */
-		reg = <0x60>;
-
-		/* CAM3_RST_N */
-		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam3_default>;
-
-		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
-		clock-names = "xclk";
-		clock-frequency = <24000000>;
-
-		/*
-		 * The &vreg_s4a_1p8 trace always powered on.
-		 *
-		 * The 2.8V vdda-supply regulator is enabled when the
-		 * vreg_s4a_1p8 trace is pulled high.
-		 * It too is represented by a fixed regulator.
-		 *
-		 * No 1.2V vddd-supply regulator is used.
-		 */
-		vdddo-supply = <&vreg_lvs1a_1p8>;
-		vdda-supply = <&cam3_avdd_2v8>;
-
-		status = "disabled";
-
-		port {
-			ov7251_ep: endpoint {
-				data-lanes = <0 1>;
-/*				remote-endpoint = <&csiphy3_ep>; */
-			};
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index c7eba6c491be..8abf3e909502 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -18,7 +19,7 @@
 / {
 	model = "Thundercomm Dragonboard 845c";
 	compatible = "thundercomm,db845c", "qcom,sdm845";
-	qcom,msm-id = <341 0x20001>;
+	qcom,msm-id = <QCOM_ID_SDA845 0x20001>;
 	qcom,board-id = <8 0>;
 
 	aliases {
@@ -31,7 +32,7 @@
 	};
 
 	/* Fixed crystal oscillator dedicated to MCP2517FD */
-	clk40M: can-clock {
+	clk40m: can-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <40000000>;
@@ -67,8 +68,8 @@
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
 			default-state = "off";
+			panic-indicator;
 		};
 
 		led-1 {
@@ -195,6 +196,12 @@
 
 		gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		/*
+		 * FIXME: this regulator is responsible for VBUS on the left USB
+		 * port. Keep it always on until we can correctly model this
+		 * relationship.
+		 */
+		regulator-always-on;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pcie0_pwren_state>;
@@ -438,10 +445,6 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
@@ -531,15 +534,11 @@
 
 	qcom,dual-dsi-mode;
 	qcom,master-dsi;
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
@@ -553,18 +552,15 @@
 	qcom,dual-dsi-mode;
 
 	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_b>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi1_out {
+	remote-endpoint = <&lt9611_b>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi1_phy {
@@ -580,7 +576,7 @@
 &pcie0 {
 	status = "okay";
 	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
 
 	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
 
@@ -711,19 +707,19 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 
 	dai@3 {
-		reg = <3>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 		direction = <2>;
 		is-compress-dai;
 	};
@@ -750,6 +746,12 @@
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 };
 
+&slpi_pas {
+	firmware-name = "qcom/sdm845/Thundercomm/db845c/slpi.mbn";
+
+	status = "okay";
+};
+
 &sound {
 	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
 	pinctrl-0 = <&quat_mi2s_active
@@ -768,11 +770,7 @@
 		"DMIC2", "MIC BIAS3",
 		"DMIC3", "MIC BIAS3",
 		"SpkrLeft IN", "SPK1 OUT",
-		"SpkrRight IN", "SPK2 OUT",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MM_DL4",  "MultiMedia4 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
+		"SpkrRight IN", "SPK2 OUT";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
@@ -857,7 +855,7 @@
 	can@0 {
 		compatible = "microchip,mcp2517fd";
 		reg = <0>;
-		clocks = <&clk40M>;
+		clocks = <&clk40m>;
 		interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
 		spi-max-frequency = <10000000>;
 		vdd-supply = <&vdc_5v>;
@@ -1130,7 +1128,7 @@
 	vdd-rx-supply = <&vreg_s4a_1p8>;
 	vdd-io-supply = <&vreg_s4a_1p8>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,1 {
 			compatible = "sdw10217201000";
 			reg = <0 1>;
@@ -1160,7 +1158,7 @@
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 
 	qcom,snoc-host-cap-8bit-quirk;
-	qcom,ath10k-calibration-variant = "Thundercomm_DB845C";
+	qcom,calibration-variant = "Thundercomm_DB845C";
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 76bfa786612c..63d2993536ad 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -51,9 +51,6 @@
 
 	thermal-zones {
 		xo_thermal: xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm8998_adc_tm 1>;
 
 			trips {
@@ -66,9 +63,6 @@
 		};
 
 		msm_thermal: msm-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm8998_adc_tm 2>;
 
 			trips {
@@ -81,9 +75,6 @@
 		};
 
 		pa_thermal: pa-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm8998_adc_tm 3>;
 
 			trips {
@@ -96,9 +87,6 @@
 		};
 
 		quiet_thermal: quiet-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm8998_adc_tm 4>;
 
 			trips {
@@ -426,10 +414,6 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
@@ -461,15 +445,6 @@
 	qcom,dual-dsi-mode;
 	qcom,master-dsi;
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&truly_in_0>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-
 	panel@0 {
 		compatible = "truly,nt35597-2K-display";
 		reg = <0>;
@@ -499,6 +474,11 @@
 	};
 };
 
+&mdss_dsi0_out {
+	remote-endpoint = <&truly_in_0>;
+	data-lanes = <0 1 2 3>;
+};
+
 &mdss_dsi0_phy {
 	status = "okay";
 	vdds-supply = <&vdda_mipi_dsi0_pll>;
@@ -511,16 +491,13 @@
 	qcom,dual-dsi-mode;
 
 	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&truly_in_1>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi1_out {
+	remote-endpoint = <&truly_in_1>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi1_phy {
@@ -801,7 +778,7 @@
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 
 	qcom,snoc-host-cap-8bit-quirk;
-	qcom,ath10k-calibration-variant = "Qualcomm_sdm845mtp";
+	qcom,calibration-variant = "Qualcomm_sdm845mtp";
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index b523b5fff702..dcfffb271fcf 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -7,7 +7,9 @@
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
@@ -20,6 +22,9 @@
 /delete-node/ &rmtfs_mem;
 
 / {
+	chassis-type = "handset";
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
+
 	aliases {
 		serial0 = &uart9;
 		serial1 = &uart6;
@@ -344,10 +349,6 @@
 				<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
@@ -484,41 +485,63 @@
 	status = "okay";
 };
 
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &q6afedai {
-	qi2s@22 {
-		reg = <22>;
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
 		qcom,sd-lines = <1>;
 	};
 
-	qi2s@23 {
-		reg = <23>;
+	dai@23 {
+		reg = <QUATERNARY_MI2S_TX>;
 		qcom,sd-lines = <0>;
 	};
 };
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 
 	dai@3 {
-		reg = <3>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 	};
 
 	dai@4 {
-		reg = <4>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA5>;
 	};
 
 	dai@5 {
-		reg = <5>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA6>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
index 4005e04d998a..a259eb9d45ae 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
@@ -5,13 +5,12 @@
  * Copyright (c) 2020, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/leds/common.h>
 #include "sdm845-oneplus-common.dtsi"
 
 / {
 	model = "OnePlus 6";
 	compatible = "oneplus,enchilada", "qcom,sdm845";
-	chassis-type = "handset";
-	qcom,msm-id = <0x141 0x20001>;
 	qcom,board-id = <8 0 17819 22>;
 
 	battery: battery {
@@ -20,6 +19,14 @@
 		charge-full-design-microamp-hours = <3300000>;
 		voltage-min-design-microvolt = <3400000>;
 		voltage-max-design-microvolt = <4400000>;
+
+		/*
+		 * Typical designs have multiple charger ICs which can handle more
+		 * current but the OnePlus 6/T do not, hence the lower limit. This
+		 * does not apply when using the Dash Charger, however this is not
+		 * yet supported.
+		 */
+		constant-charge-current-max-microamp = <1800000>;
 	};
 };
 
@@ -55,6 +62,33 @@
 	monitored-battery = <&battery>;
 };
 
+&pmi8998_lpg {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@4 {
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
 &sound {
 	model = "OnePlus 6";
 	audio-routing = "RX_BIAS", "MCLK",
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
index 9471ada0d6ad..7e75decfda05 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
@@ -10,8 +10,6 @@
 / {
 	model = "OnePlus 6T";
 	compatible = "oneplus,fajita", "qcom,sdm845";
-	chassis-type = "handset";
-	qcom,msm-id = <0x141 0x20001>;
 	qcom,board-id = <8 0 18801 41>;
 
 	battery: battery {
@@ -20,6 +18,14 @@
 		charge-full-design-microamp-hours = <3700000>;
 		voltage-min-design-microvolt = <3400000>;
 		voltage-max-design-microvolt = <4400000>;
+
+		/*
+		 * Typical designs have multiple charger ICs which can handle more
+		 * current but the OnePlus 6/T do not, hence the lower limit. This
+		 * does not apply when using the Dash Charger, however this is not
+		 * yet supported.
+		 */
+		constant-charge-current-max-microamp = <1800000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index d37a433130b9..75a53f0bbebd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -7,15 +7,38 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd934x.h>
+
 #include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "sdm845-wcd9340.dtsi"
+
+/delete-node/ &rmtfs_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &slpi_mem;
 
 / {
 	chassis-type = "handset";
 	model = "Samsung Galaxy S9 SM-G9600";
 	compatible = "samsung,starqltechn", "qcom,sdm845";
 
+	battery: battery {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <2150000>;
+		charge-full-design-microamp-hours = <3000000>;
+
+		over-voltage-threshold-microvolt = <4500000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -27,9 +50,40 @@
 			height = <2960>;
 			stride = <(1440 * 4)>;
 			format = "a8r8g8b8";
+			vci-supply = <&s2dos05_ldo4>;
+			vddr-supply = <&s2dos05_buck>;
+			vdd3-supply = <&s2dos05_ldo1>;
 		};
 	};
 
+	slpi_regulator: slpi-regulator {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&slpi_ldo_active_state>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "slpi";
+
+		enable-active-high;
+		gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	vib_regulator: gpio-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "haptic";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8998_gpios 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-boot-on;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -68,9 +122,179 @@
 			ftrace-size = <0x40000>;
 			pmsg-size = <0x40000>;
 		};
+
+		/*
+		 * It seems like reserving the old rmtfs_mem region is also needed to prevent
+		 * random crashes which are most likely modem related, more testing needed.
+		 */
+		removed_region: removed-region@88f00000 {
+			reg = <0 0x88f00000 0 0x1c00000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@96700000 {
+			reg = <0 0x96700000 0 0x1000000>;
+			no-map;
+		};
+
+		spss_mem: spss@97700000 {
+			reg = <0 0x97700000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_mem: memory@97800000 {
+			reg = <0 0x97800000 0 0x2000000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs-mem@fde00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xfde00000 0 0x202000>;
+			qcom,use-guard-pages;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+	};
+
+	i2c21 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 127 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 128 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		pinctrl-0 = <&i2c21_sda_state &i2c21_scl_state>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@60 {
+			compatible = "samsung,s2dos05";
+			reg = <0x60>;
+
+			regulators {
+				s2dos05_ldo1: ldo1 {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-name = "ldo1";
+				};
+
+				s2dos05_ldo2: ldo2 {
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-name = "ldo2";
+				};
+
+				s2dos05_ldo3: ldo3 {
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-name = "ldo3";
+				};
+
+				s2dos05_ldo4: ldo4 {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <3775000>;
+					regulator-name = "ldo4";
+				};
+
+				s2dos05_buck: buck {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <2100000>;
+					regulator-name = "buck";
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+
+		key-wink {
+			label = "Bixby";
+			gpios = <&pm8998_gpios 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			debounce-interval = <15>;
+		};
+	};
+
+	vib_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+		assigned-clock-parents = <&rpmhcc RPMH_CXO_CLK>;
+		assigned-clocks = <&gcc GCC_GP1_CLK_SRC>;
+		clocks = <&gcc GCC_GP1_CLK>;
+		pinctrl-0 = <&motor_pwm_default_state>;
+		pinctrl-1 = <&motor_pwm_suspend_state>;
+		pinctrl-names = "default", "suspend";
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn";
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,s6e3ha8";
+		reg = <0>;
+		vci-supply = <&s2dos05_ldo4>;
+		vddr-supply = <&s2dos05_buck>;
+		vdd3-supply = <&s2dos05_ldo1>;
+		te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&dsi_default &dsi_te>;
+		pinctrl-1 = <&dsi_suspend &dsi_te>;
+		pinctrl-names = "default", "suspend";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
 	};
 };
 
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+	status = "okay";
+};
 
 &apps_rsc {
 	regulators-0 {
@@ -135,8 +359,6 @@
 		vdda_sp_sensor:
 		vdda_ufs1_core:
 		vdda_ufs2_core:
-		vdda_usb1_ss_core:
-		vdda_usb2_ss_core:
 		vreg_l1a_0p875: ldo1 {
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
@@ -157,6 +379,7 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vdda_usb1_ss_core:
 		vdd_wcss_cx:
 		vdd_wcss_mx:
 		vdda_wcss_pll:
@@ -365,10 +588,78 @@
 	status = "okay";
 };
 
+&gpi_dma1 {
+	status = "okay";
+};
+
 &uart9 {
 	status = "okay";
 };
 
+&i2c14 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "maxim,max77705";
+		reg = <0x66>;
+		interrupt-parent = <&pm8998_gpios>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		leds {
+			compatible = "maxim,max77705-rgb";
+
+			multi-led {
+				color = <LED_COLOR_ID_RGB>;
+				function = LED_FUNCTION_STATUS;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_RED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+				};
+
+				led@3 {
+					reg = <3>;
+					color = <LED_COLOR_ID_BLUE>;
+				};
+			};
+		};
+
+		haptic {
+			compatible = "maxim,max77705-haptic";
+			haptic-supply = <&vib_regulator>;
+			pwms = <&vib_pwm 0 52084>;
+		};
+	};
+
+	max77705_charger: charger@69 {
+		reg = <0x69>;
+		compatible = "maxim,max77705-charger";
+		monitored-battery = <&battery>;
+		interrupt-parent = <&pm8998_gpios>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	fuel-gauge@36 {
+		reg = <0x36>;
+		compatible = "maxim,max77705-battery";
+		power-supplies = <&max77705_charger>;
+		maxim,rsns-microohm = <5000>;
+		interrupt-parent = <&pm8998_gpios>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 	vcc-supply = <&vreg_l20a_2p95>;
@@ -383,14 +674,256 @@
 };
 
 &sdhc_2 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
+	pinctrl-names = "default";
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&vreg_l21a_2p95>;
 	vqmmc-supply = <&vddpx_2>;
 	status = "okay";
 };
 
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+		vdd-supply = <&s2dos05_ldo2>;
+		avdd-supply = <&s2dos05_ldo3>;
+
+		pinctrl-0 = <&touch_irq_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm845/starqltechn/adsp.mbn";
+	status = "okay";
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sdm845-sndcard";
+	model = "Samsung Galaxy S9";
+	pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	audio-routing = "RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2",	/* Headset Mic */
+			"AMIC3", "MIC BIAS2",	/* FM radio left Tx */
+			"AMIC4", "MIC BIAS2",	/* FM radio right Tx */
+			"DMIC0", "MCLK",	/* Bottom Mic */
+			"DMIC0", "MIC BIAS1",
+			"DMIC2", "MCLK",	/* Top Mic */
+			"DMIC2", "MIC BIAS3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	mm5-dai-link {
+		link-name = "MultiMedia5";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+		};
+	};
+
+	mm6-dai-link {
+		link-name = "MultiMedia6";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback 1";
+
+		codec {
+			sound-dai = <&wcd9340 AIF1_PB>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture 1";
+
+		codec {
+			sound-dai = <&wcd9340 AIF1_CAP>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slim2-dai-link {
+		link-name = "SLIM Playback 2";
+
+		codec {
+			sound-dai = <&wcd9340 AIF2_PB>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slimcap2-dai-link {
+		link-name = "SLIM Capture 2";
+
+		codec {
+			sound-dai = <&wcd9340 AIF2_CAP>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slimcap3-dai-link {
+		link-name = "SLIM Capture 3";
+
+		codec {
+			sound-dai = <&wcd9340 AIF3_CAP>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_2_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+};
+
+&q6afedai {
+	dai@22 {
+		reg = <22>;
+		qcom,sd-lines = <1>;
+	};
+
+	dai@23 {
+		reg = <23>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+
+	dai@4 {
+		reg = <4>;
+	};
+
+	dai@5 {
+		reg = <5>;
+	};
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,micbias1-microvolt = <1800000>;
+	qcom,micbias2-microvolt = <2700000>;
+	qcom,micbias3-microvolt = <1800000>;
+	qcom,micbias4-microvolt = <1800000>;
+};
+
+&mss_pil {
+	firmware-name = "qcom/sdm845/starqltechn/mba.mbn",
+			"qcom/sdm845/starqltechn/modem.mbn";
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/starqltechn/ipa_fws.mbn";
+	status = "okay";
+};
+
+&slpi_pas {
+	firmware-name = "qcom/sdm845/starqltechn/slpi.mbn";
+	cx-supply = <&slpi_regulator>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
@@ -418,16 +951,75 @@
 	status = "okay";
 };
 
-&wifi {
-	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
-	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
-	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
-	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
 };
 
+&pm8998_gpios {
+	pmic_int_default: pmic-int-default-state {
+		pins = "gpio11";
+		function = "normal";
+		input-enable;
+		bias-disable;
+		power-source = <0>;
+	};
+};
+
 &tlmm {
-	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
+	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
+			       <85 4>; /* SPI (fingerprint reader) */
+
+	dsi_default: dsi-default-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	dsi_suspend: dsi-suspend-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	dsi_te: dsi-te-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	i2c21_sda_state: i2c21-sda-state {
+		pins = "gpio127";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c21_scl_state: i2c21-scl-state {
+		pins = "gpio128";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	motor_pwm_default_state: motor-pwm-active-state {
+		pins = "gpio57";
+		function = "gcc_gp1";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	motor_pwm_suspend_state: motor-pwm-suspend-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
 
 	sdc2_clk_state: sdc2-clk-state {
 		pins = "sdc2_clk";
@@ -457,4 +1049,22 @@
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	slpi_ldo_active_state: slpi-ldo-active-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touch_irq_state: touch-irq-state {
+		pins = "gpio120";
+		function = "gpio";
+		bias-disable;
+	};
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+	bias-disable;
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index fbb8655653fb..89260fce6513 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -1,12 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com>
- * Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech>
+ * Copyright (c) 2022, Casey Connolly <casey.connolly@linaro.org>
  * Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be>
  */
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -17,7 +18,8 @@
 / {
 	model = "SHIFT SHIFT6mq";
 	compatible = "shift,axolotl", "qcom,sdm845";
-	qcom,msm-id = <321 0x20001>;
+	chassis-type = "handset";
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
 	qcom,board-id = <11 0>;
 
 	aliases {
@@ -60,7 +62,7 @@
 	};
 
 	reserved-memory {
-		framebuffer_region@9d400000 {
+		framebuffer@9d400000 {
 			reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
 			no-map;
 		};
@@ -419,10 +421,6 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
@@ -452,7 +450,6 @@
 		irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
 		touchscreen-size-x = <1080>;
 		touchscreen-size-y = <2160>;
-		focaltech,max-touch-number = <5>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index b02a1dc5fecd..f3f4c0900572 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
  */
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -12,7 +13,7 @@
 #include "pmi8998.dtsi"
 
 / {
-	qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>; /* SDM845 v2.1 */
 	qcom,board-id = <8 0>;
 
 	aliases {
@@ -415,10 +416,6 @@
 			<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
index c15d48860646..6172cd1539e6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
@@ -54,7 +54,7 @@
 				reg = <0x42 0x2>;
 			};
 
-			swm: swm@c85 {
+			swm: soundwire@c85 {
 				compatible = "qcom,soundwire-v1.3.0";
 				reg = <0xc85 0x40>;
 				interrupts-extended = <&wcd9340 20>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 93b1582e807d..7480c8d7ac5b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -2,6 +2,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -32,7 +33,7 @@
 
 	/* required for bootloader to select correct board */
 	qcom,board-id = <69 0>;
-	qcom,msm-id = <321 0x20001>;
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
 
 	aliases {
 		serial1 = &uart6;
@@ -239,7 +240,7 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
+&gpi_dma1 {
 	status = "okay";
 };
 
@@ -355,6 +356,28 @@
 	status = "okay";
 };
 
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &pm8998_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -370,15 +393,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -386,6 +409,10 @@
 	status = "okay";
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &sdhc_2 {
 	status = "okay";
 
@@ -491,6 +518,37 @@
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-down;
+		output-disable;
+	};
+
+	ts_reset_default: ts-reset-default-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		output-high;
+	};
+
+	ts_int_sleep: ts-int-sleep-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+		output-disable;
+	};
+
+	ts_reset_sleep: ts-reset-sleep-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
 };
 
 &uart6 {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
index 76931ebad065..2d6f0e382a6c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
@@ -13,3 +13,26 @@
 	compatible = "ebbg,ft8719";
 	status = "okay";
 };
+
+&i2c14 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "focaltech,ft8719";
+		reg = <0x38>;
+
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+		panel = <&display_panel>;
+
+		iovcc-supply = <&vreg_l14a_1p8>;
+		vcc-supply = <&lab>;
+
+		pinctrl-0 = <&ts_int_default &ts_reset_default>;
+		pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2246>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
index e9427851ebaa..b58964cde834 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
@@ -13,3 +13,26 @@
 	compatible = "tianma,fhd-video", "novatek,nt36672a";
 	status = "okay";
 };
+
+&i2c14 {
+	status = "okay";
+
+	touchscreen@1 {
+		compatible = "novatek,nt36672a-ts";
+		reg = <0x01>;
+
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+		panel = <&display_panel>;
+
+		iovcc-supply = <&vreg_l14a_1p8>;
+		vcc-supply = <&lab>;
+
+		pinctrl-0 = <&ts_int_default &ts_reset_default>;
+		pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2246>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index e386b504e978..1c50a0563bc4 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -38,7 +39,7 @@
 	chassis-type = "handset";
 
 	/* required for bootloader to select correct board */
-	qcom,msm-id = <0x141 0x20001>;
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
 	qcom,board-id = <0x2a 0x0>;
 
 	aliases {
@@ -381,10 +382,6 @@
 				<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
@@ -547,15 +544,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index bf5e6eb9d313..13c9515260ef 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/clock/qcom,camcc-sdm845.h>
 #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
 #include <dt-bindings/clock/qcom,lpass-sdm845.h>
@@ -15,6 +16,7 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -90,7 +92,7 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x0>;
@@ -102,16 +104,16 @@
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
+			next-level-cache = <&l2_0>;
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -119,7 +121,7 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x100>;
@@ -131,19 +133,19 @@
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_100>;
-			L2_100: l2-cache {
+			next-level-cache = <&l2_100>;
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x200>;
@@ -155,19 +157,19 @@
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_200>;
-			L2_200: l2-cache {
+			next-level-cache = <&l2_200>;
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x300>;
@@ -180,18 +182,18 @@
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
-			next-level-cache = <&L2_300>;
-			L2_300: l2-cache {
+			next-level-cache = <&l2_300>;
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x400>;
@@ -203,19 +205,19 @@
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_400>;
-			L2_400: l2-cache {
+			next-level-cache = <&l2_400>;
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x500>;
@@ -227,19 +229,19 @@
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_500>;
-			L2_500: l2-cache {
+			next-level-cache = <&l2_500>;
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x600>;
@@ -251,19 +253,19 @@
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_600>;
-			L2_600: l2-cache {
+			next-level-cache = <&l2_600>;
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x700>;
@@ -275,50 +277,50 @@
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			next-level-cache = <&L2_700>;
-			L2_700: l2-cache {
+			next-level-cache = <&l2_700>;
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -326,7 +328,7 @@
 		cpu_idle_states: idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -336,7 +338,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -348,7 +350,7 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			cluster_sleep_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c244>;
 				entry-latency-us = <3263>;
@@ -716,57 +718,57 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CLUSTER_PD: power-domain-cluster {
+		cluster_pd: power-domain-cluster {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			domain-idle-states = <&cluster_sleep_0>;
 		};
 	};
 
@@ -2306,7 +2308,7 @@
 			};
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c00000 0 0x2000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -2325,14 +2327,30 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -2375,6 +2393,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -2405,7 +2433,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c08000 0 0x2000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2424,14 +2452,30 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
@@ -2479,6 +2523,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0a000 {
@@ -2565,7 +2619,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_PHY_GDSC>;
@@ -2595,47 +2649,64 @@
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
 				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
-			freq-table-hz =
-				<50000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 150000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>;
+
+			operating-points-v2 = <&ufs_opp_table>;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sdm845-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_CLK>;
 			clock-names = "ref",
-				      "ref_aux";
-			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+				      "ref_aux",
+				      "qref";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -3353,8 +3424,8 @@
 
 			qcom,qmp = <&aoss_qmp>;
 
-			power-domains = <&rpmhpd SDM845_CX>,
-					<&rpmhpd SDM845_MX>;
+			power-domains = <&rpmhpd SDM845_LCX>,
+					<&rpmhpd SDM845_LMX>;
 			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&slpi_mem>;
@@ -3545,11 +3616,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					etf_in: endpoint {
 						remote-endpoint =
 						  <&merge_funnel_out>;
@@ -3580,7 +3648,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07040000 0 0x1000>;
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3600,7 +3668,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07140000 0 0x1000>;
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3620,7 +3688,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07240000 0 0x1000>;
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3640,7 +3708,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07340000 0 0x1000>;
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3660,7 +3728,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07440000 0 0x1000>;
 
-			cpu = <&CPU4>;
+			cpu = <&cpu4>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3680,7 +3748,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07540000 0 0x1000>;
 
-			cpu = <&CPU5>;
+			cpu = <&cpu5>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3700,7 +3768,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07640000 0 0x1000>;
 
-			cpu = <&CPU6>;
+			cpu = <&cpu6>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3720,7 +3788,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07740000 0 0x1000>;
 
-			cpu = <&CPU7>;
+			cpu = <&cpu7>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3924,7 +3992,7 @@
 			compatible = "qcom,sdm845-lmh";
 			reg = <0 0x17d70800 0 0x400>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			cpus = <&CPU4>;
+			cpus = <&cpu4>;
 			qcom,lmh-temp-arm-millicelsius = <65000>;
 			qcom,lmh-temp-low-millicelsius = <94500>;
 			qcom,lmh-temp-high-millicelsius = <95000>;
@@ -3936,7 +4004,7 @@
 			compatible = "qcom,sdm845-lmh";
 			reg = <0 0x17d78800 0 0x400>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			cpus = <&CPU0>;
+			cpus = <&cpu0>;
 			qcom,lmh-temp-arm-millicelsius = <65000>;
 			qcom,lmh-temp-low-millicelsius = <94500>;
 			qcom,lmh-temp-high-millicelsius = <95000>;
@@ -3996,37 +4064,61 @@
 
 			#clock-cells = <1>;
 			#phy-cells = <1>;
+			orientation-switch;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp_out>;
+					};
+				};
+			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x18c>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x128>,
-				      <0 0x088eb400 0 0x1fc>,
-				      <0 0x088eb800 0 0x218>,
-				      <0 0x088eb600 0 0x70>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		usb_1: usb@a6f8800 {
@@ -4053,12 +4145,16 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -4075,8 +4171,31 @@
 				iommus = <&apps_smmu 0x740 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
+					};
+				};
 			};
 		};
 
@@ -4104,12 +4223,16 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+			interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
 
@@ -4126,7 +4249,10 @@
 				iommus = <&apps_smmu 0x760 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4160,14 +4286,6 @@
 
 			status = "disabled";
 
-			video-core0 {
-				compatible = "venus-decoder";
-			};
-
-			video-core1 {
-				compatible = "venus-encoder";
-			};
-
 			venus_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -4237,16 +4355,16 @@
 				"vfe1",
 				"vfe_lite";
 
-			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csid0",
 				"csid1",
 				"csid2",
@@ -4452,7 +4570,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sdm845-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_AXI_CLK>,
@@ -4477,7 +4595,7 @@
 					port@0 {
 						reg = <0>;
 						dpu_intf0_out: endpoint {
-							remote-endpoint = <&dp_in>;
+							remote-endpoint = <&mdss_dp_in>;
 						};
 					};
 
@@ -4538,12 +4656,19 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
-				clock-names = "core_iface", "core_aux", "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
@@ -4556,14 +4681,16 @@
 					#size-cells = <0>;
 					port@0 {
 						reg = <0>;
-						dp_in: endpoint {
+						mdss_dp_in: endpoint {
 							remote-endpoint = <&dpu_intf0_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dp_out: endpoint { };
+						mdss_dp_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_dp_in>;
+						};
 					};
 				};
 
@@ -4613,8 +4740,10 @@
 					      "core",
 					      "iface",
 					      "bus";
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM845_CX>;
@@ -4685,8 +4814,10 @@
 					      "core",
 					      "iface",
 					      "bus";
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM845_CX>;
@@ -4755,6 +4886,7 @@
 			operating-points-v2 = <&gpu_opp_table>;
 
 			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
 
 			interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>;
 			interconnect-names = "gfx-mem";
@@ -4856,8 +4988,6 @@
 
 			operating-points-v2 = <&gmu_opp_table>;
 
-			status = "disabled";
-
 			gmu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -4879,10 +5009,10 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -4982,18 +5112,18 @@
 			#interrupt-cells = <4>;
 		};
 
-		sram@146bf000 {
+		sram@14680000 {
 			compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
-			reg = <0 0x146bf000 0 0x1000>;
+			reg = <0 0x14680000 0 0x40000>;
 
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			ranges = <0 0 0x146bf000 0x1000>;
+			ranges = <0 0 0x14680000 0x40000>;
 
-			pil-reloc@94c {
+			pil-reloc@3f94c {
 				compatible = "qcom,pil-reloc-info";
-				reg = <0x94c 0xc8>;
+				reg = <0x3f94c 0xc8>;
 			};
 		};
 
@@ -5069,6 +5199,78 @@
 				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		anoc_1_tbu: tbu@150c5000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150c5000 0x0 0x1000>;
+			interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_TBU1_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x0 0x400>;
+		};
+
+		anoc_2_tbu: tbu@150c9000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150c9000 0x0 0x1000>;
+			interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_TBU2_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x400 0x400>;
+		};
+
+		mnoc_hf_0_tbu: tbu@150cd000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150cd000 0x0 0x1000>;
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mmss_noc SLAVE_MNOC_HF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x800 0x400>;
+		};
+
+		mnoc_hf_1_tbu: tbu@150d1000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150d1000 0x0 0x1000>;
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mmss_noc SLAVE_MNOC_HF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0xc00 0x400>;
+		};
+
+		mnoc_sf_0_tbu: tbu@150d5000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150d5000 0x0 0x1000>;
+			interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mmss_noc SLAVE_MNOC_SF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x1000 0x400>;
+		};
+
+		compute_dsp_tbu: tbu@150d9000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150d9000 0x0 0x1000>;
+			interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			qcom,stream-id-range = <&apps_smmu 0x1400 0x400>;
+		};
+
+		adsp_tbu: tbu@150dd000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150dd000 0x0 0x1000>;
+			interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_AUDIO_TBU_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x1800 0x400>;
+		};
+
+		anoc_1_pcie_tbu: tbu@150e1000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150e1000 0x0 0x1000>;
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>;
+		};
+
 		lpasscc: clock-controller@17014000 {
 			compatible = "qcom,sdm845-lpasscc";
 			reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>;
@@ -5088,7 +5290,7 @@
 			compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
 			reg = <0 0x17980000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		apss_shared: mailbox@17990000 {
@@ -5098,8 +5300,8 @@
 		};
 
 		apps_rsc: rsc@179c0000 {
+			compatible = "qcom,sdm845-rpmh-apps-rsc", "qcom,rpmh-rsc";
 			label = "apps_rsc";
-			compatible = "qcom,rpmh-rsc";
 			reg = <0 0x179c0000 0 0x10000>,
 			      <0 0x179d0000 0 0x10000>,
 			      <0 0x179e0000 0 0x10000>;
@@ -5113,7 +5315,7 @@
 					  <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>,
 					  <CONTROL_TCS 1>;
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
@@ -5201,11 +5403,11 @@
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			qcom,controlled-remotely;
 			reg = <0 0x17184000 0 0x2a000>;
-			num-channels = <31>;
+			num-channels = <23>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <1>;
-			qcom,num-ees = <2>;
+			qcom,num-ees = <4>;
 			iommus = <&apps_smmu 0x1806 0x0>;
 		};
 
@@ -5322,7 +5524,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -5349,7 +5550,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -5376,7 +5576,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -5403,7 +5602,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -5430,7 +5628,6 @@
 
 		cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -5457,7 +5654,6 @@
 
 		cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -5484,7 +5680,6 @@
 
 		cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -5511,7 +5706,6 @@
 
 		cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -5538,7 +5732,6 @@
 
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -5553,7 +5746,6 @@
 
 		cluster0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -5563,7 +5755,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster0_crit: cluster0_crit {
+				cluster0_crit: cluster0-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -5573,7 +5765,6 @@
 
 		cluster1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -5583,7 +5774,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster1_crit: cluster1_crit {
+				cluster1_crit: cluster1-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -5593,37 +5784,72 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu1_alert0: trip-point0 {
+				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu2_alert0: trip-point0 {
+				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -5638,7 +5864,6 @@
 
 		q6-modem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -5653,7 +5878,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -5668,7 +5892,6 @@
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -5683,7 +5906,6 @@
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -5698,7 +5920,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -5713,7 +5934,6 @@
 
 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -5728,7 +5948,6 @@
 
 		modem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 7>;
 
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 92a812b5f423..90efbb7e3799 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -355,10 +355,6 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 	zap-shader {
@@ -370,6 +366,103 @@
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
+
+	embedded-controller@70 {
+		compatible = "lenovo,yoga-c630-ec";
+		reg = <0x70>;
+
+		interrupts-extended = <&tlmm 20 IRQ_TYPE_LEVEL_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_int_state>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "host";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ucsi0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ucsi0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					ucsi0_sbu: endpoint {
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "host";
+
+			/*
+			 * connected to the onboard USB hub, each pair of lanes
+			 * (and D+/D- pair) is connected to a separate port on
+			 * the hub.
+			 */
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ucsi1_hs_in_1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&usb_hub_2_1>;
+					};
+
+					ucsi1_hs_in_2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&usb_hub_2_2>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ucsi1_ss_in_1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&usb_hub_3_1>;
+					};
+
+					ucsi1_ss_in_2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&usb_hub_3_2>;
+					};
+				};
+			};
+		};
+	};
 };
 
 &i2c3 {
@@ -392,6 +485,8 @@
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
+
+		wakeup-source;
 	};
 };
 
@@ -408,6 +503,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_hid_active>;
+
+		wakeup-source;
 	};
 };
 
@@ -482,12 +579,15 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c11_hid_active>;
+
+		wakeup-source;
 	};
 };
 
 &ipa {
 	qcom,gsi-loader = "self";
 	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm850/LENOVO/81JL/ipa_fws.elf";
 	status = "okay";
 };
 
@@ -498,15 +598,11 @@
 &mdss_dsi0 {
 	status = "okay";
 	vdda-supply = <&vreg_l26a_1p2>;
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&sn65dsi86_in_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&sn65dsi86_in_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
@@ -549,18 +645,24 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
+&slpi_pas {
+	firmware-name = "qcom/sdm850/LENOVO/81JL/qcslpi850.mbn";
+
+	status = "okay";
+};
+
 &sound {
 	compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard";
 	model = "Lenovo-YOGA-C630-13Q50";
@@ -569,10 +671,7 @@
 		"RX_BIAS", "MCLK",
 		"AMIC2", "MIC BIAS2",
 		"SpkrLeft IN", "SPK1 OUT",
-		"SpkrRight IN", "SPK2 OUT",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL3",  "MultiMedia3 Playback",
-		"MultiMedia2 Capture", "MM_UL2";
+		"SpkrRight IN", "SPK2 OUT";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
@@ -688,6 +787,13 @@
 
 		bias-disable;
 	};
+
+	ec_int_state: ec-int-state {
+		pins = "gpio20";
+		function = "gpio";
+
+		bias-disable;
+	};
 };
 
 &uart6 {
@@ -735,6 +841,10 @@
 	dr_mode = "host";
 };
 
+&usb_1_dwc3_hs {
+	remote-endpoint = <&ucsi0_hs_in>;
+};
+
 &usb_1_hsphy {
 	status = "okay";
 
@@ -755,12 +865,79 @@
 	vdda-pll-supply = <&vdda_usb1_ss_core>;
 };
 
+&usb_1_qmpphy_out {
+	remote-endpoint = <&ucsi0_ss_in>;
+};
+
 &usb_2 {
 	status = "okay";
 };
 
 &usb_2_dwc3 {
 	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb_hub_2_x: hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+		peer-hub = <&usb_hub_3_x>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		camera@3 {
+			compatible = "usb4f2,b61e";
+			reg = <3>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				usb_hub_2_1: endpoint {
+					remote-endpoint = <&ucsi1_hs_in_1>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				usb_hub_2_2: endpoint {
+					remote-endpoint = <&ucsi1_hs_in_2>;
+				};
+			};
+		};
+	};
+
+	usb_hub_3_x: hub@2 {
+		compatible = "usb5e3,620";
+		reg = <2>;
+		peer-hub = <&usb_hub_2_x>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				usb_hub_3_1: endpoint {
+					remote-endpoint = <&ucsi1_ss_in_1>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				usb_hub_3_2: endpoint {
+					remote-endpoint = <&ucsi1_ss_in_2>;
+				};
+			};
+		};
+	};
 };
 
 &usb_2_hsphy {
@@ -797,7 +974,7 @@
 	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
@@ -828,6 +1005,7 @@
 	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 
 	qcom,snoc-host-cap-8bit-quirk;
+	qcom,calibration-variant = "Lenovo_C630";
 };
 
 &crypto {
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index 543837316001..a676d3ea01b9 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -425,15 +425,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -445,10 +445,7 @@
 		"RX_BIAS", "MCLK",
 		"AMIC2", "MIC BIAS2",
 		"SpkrLeft IN", "SPK1 OUT",
-		"SpkrRight IN", "SPK2 OUT",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL3",  "MultiMedia3 Playback",
-		"MultiMedia2 Capture", "MM_UL2";
+		"SpkrRight IN", "SPK2 OUT";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
@@ -658,7 +655,7 @@
 	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index a14e0650c4a8..06cacec3461f 100644
--- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -41,6 +41,29 @@
 
 		vin-supply = <&vph_ext>;
 	};
+
+	reg_2v952_vcc: regulator-2v952-vcc {
+		compatible = "regulator-gpio";
+		regulator-name = "2v952_vcc";
+		regulator-min-microvolt = <1650000>;
+		regulator-max-microvolt = <3600000>;
+		enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+		gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+		states = <1650000 0>, <3600000 1>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		regulator-boot-on;
+
+		vin-supply = <&vph_ext>;
+	};
+
+	reg_2v95_vdd: regulator-2v95-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "2v95_vdd";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+		vin-supply = <&reg_2v952_vcc>;
+	};
 };
 
 &apps_rsc {
@@ -250,14 +273,89 @@
 	stdout-path = "serial0:115200n8";
 };
 
+&pm7550ba_eusb2_repeater {
+	vdd18-supply = <&vreg_l5b_1p776>;
+	vdd3-supply = <&vreg_l10b_3p08>;
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* efs2 partition is secured */
+		secure-regions = /bits/ 64 <0x680000 0xb00000>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
 
+&remoteproc_mpss {
+	firmware-name = "qcom/sdx75/modem.mbn",
+			"qcom/sdx75/modem_dtb.mbn";
+	status = "okay";
+};
+
+&sdhc {
+	cd-gpios = <&tlmm 103 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_2v95_vdd>;
+	vqmmc-supply = <&reg_2v952_vcc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc1_default &sd_cd>;
+	pinctrl-1 = <&sdc1_sleep &sd_cd>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <110 6>;
+
+	sd_cd: sd-cd-state {
+		pins = "gpio103";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &uart1 {
 	status = "okay";
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4b_0p88>;
+	vdda12-supply = <&vreg_l1b_1p2>;
+
+	phys = <&pm7550ba_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4b_0p88>;
+	vdda-pll-supply = <&vreg_l1b_1p2>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
index e180aa4023ec..75bfc19f412c 100644
--- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -8,7 +8,12 @@
 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sdx75-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sdx75.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -29,7 +34,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -38,25 +43,25 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -64,85 +69,85 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
-			next-level-cache = <&L2_100>;
+			next-level-cache = <&l2_100>;
 
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
-			next-level-cache = <&L2_200>;
+			next-level-cache = <&l2_200>;
 
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x300>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
-			next-level-cache = <&L2_300>;
+			next-level-cache = <&l2_300>;
 
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 			};
 		};
@@ -150,7 +155,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			CPU_OFF: cpu-sleep-0 {
+			cpu_off: cpu-sleep-0 {
 				compatible = "arm,idle-state";
 				entry-latency-us = <235>;
 				exit-latency-us = <428>;
@@ -159,7 +164,7 @@
 				local-timer-stop;
 			};
 
-			CPU_RAIL_OFF: cpu-rail-sleep-1 {
+			cpu_rail_off: cpu-rail-sleep-1 {
 				compatible = "arm,idle-state";
 				entry-latency-us = <800>;
 				exit-latency-us = <750>;
@@ -171,7 +176,7 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			cluster_sleep_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
 				entry-latency-us = <1050>;
@@ -179,7 +184,7 @@
 				min-residency-us = <5309>;
 			};
 
-			CLUSTER_SLEEP_1: cluster-sleep-1 {
+			cluster_sleep_1: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41001344>;
 				entry-latency-us = <2761>;
@@ -187,7 +192,7 @@
 				min-residency-us = <8467>;
 			};
 
-			CLUSTER_SLEEP_2: cluster-sleep-2 {
+			cluster_sleep_2: cluster-sleep-2 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100b344>;
 				entry-latency-us = <2793>;
@@ -203,13 +208,26 @@
 		};
 	};
 
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sdx75-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+		clocks = <&rpmhcc RPMH_QPIC_CLK>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sdx75-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -217,33 +235,33 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_off &cpu_rail_off>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_off &cpu_rail_off>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_off &cpu_rail_off>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_off &cpu_rail_off>;
 		};
 
-		CLUSTER_PD: power-domain-cpu-cluster0 {
+		cluster_pd: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1 &CLUSTER_SLEEP_2>;
+			domain-idle-states = <&cluster_sleep_0 &cluster_sleep_1 &cluster_sleep_2>;
 		};
 	};
 
@@ -348,7 +366,12 @@
 			no-map;
 		};
 
-		qdss_mem: qdss@88800000 {
+		qdss_mem: qdss@88500000 {
+			reg = <0x0 0x88500000 0x0 0x300000>;
+			no-map;
+		};
+
+		qlink_logging_mem: qlink-logging@88800000 {
 			reg = <0x0 0x88800000 0x0 0x300000>;
 			no-map;
 		};
@@ -359,8 +382,13 @@
 			no-map;
 		};
 
-		mpss_dsmharq_mem: mpss-dsmharq@88f00000 {
-			reg = <0x0 0x88f00000 0x0 0x5080000>;
+		mpss_dsm_mem_2: mpss-dsm-2@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x2500000>;
+			no-map;
+		};
+
+		mpss_dsm_mem: mpss-dsm@8b400000 {
+			reg = <0x0 0x8b400000 0x0 0x2b80000>;
 			no-map;
 		};
 
@@ -370,7 +398,7 @@
 		};
 
 		mpssadsp_mem: mpssadsp@8e000000 {
-			reg = <0x0 0x8e000000 0x0 0xf400000>;
+			reg = <0x0 0x8e000000 0x0 0xf100000>;
 			no-map;
 		};
 
@@ -390,13 +418,48 @@
 		};
 	};
 
-	smem: qcom,smem {
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smem: smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_mem>;
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
-	soc: soc {
+	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -426,6 +489,37 @@
 			#power-domain-cells = <1>;
 		};
 
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sdx75-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma: dma-controller@900000 {
+			compatible = "qcom,sdx75-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x00900000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7f>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			status = "disabled";
+		};
+
 		qupv3_id_0: geniqup@9c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x009c0000 0x0 0x2000>;
@@ -434,16 +528,71 @@
 			clock-names = "m-ahb",
 				      "s-ahb";
 			iommus = <&apps_smmu 0xe3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
 			status = "disabled";
 
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
 			uart1: serial@984000 {
 				compatible = "qcom,geni-debug-uart";
 				reg = <0x0 0x00984000 0x0 0x4000>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-0 = <&qupv3_se1_2uart_active>;
 				pinctrl-1 = <&qupv3_se1_2uart_sleep>;
@@ -451,6 +600,317 @@
 						"sleep";
 				status = "disabled";
 			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart4: serial@990000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_uart4_default>, <&qup_uart4_cts_rts>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00994000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c7: i2c@99c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0099c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi7: spi@99c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x0099c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		usb_hsphy: phy@ff4000 {
+			compatible = "qcom,sdx75-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy";
+			reg = <0x0 0x00ff4000 0x0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@ff6000 {
+			compatible = "qcom,sdx75-qmp-usb3-uni-phy";
+			reg = <0x0 0x00ff6000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB2_CLKREF_EN>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		system_noc: interconnect@1640000 {
+			compatible = "qcom,sdx75-system-noc";
+			reg = <0x0 0x01640000 0x0 0x4b400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_anoc: interconnect@16c0000 {
+			compatible = "qcom,sdx75-pcie-anoc";
+			reg = <0x0 0x016c0000 0x0 0x14200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		qpic_bam: dma-controller@1c9c000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x01c9c000 0x0 0x1c000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x100 0x3>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		qpic_nand: nand-controller@1cc8000 {
+			compatible = "qcom,sdx75-nand", "qcom,sdx55-nand";
+			reg = <0x0 0x01cc8000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>,
+				 <&sleep_clk>;
+			clock-names = "core",
+				      "aon";
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx",
+				    "rx",
+				    "cmd";
+			iommus = <&apps_smmu 0x100 0x3>;
+			status = "disabled";
 		};
 
 		tcsr_mutex: hwlock@1f40000 {
@@ -459,6 +919,187 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sdx75-tcsr", "syscon";
+			reg = <0x0 0x01fc0000 0x0 0x30000>;
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sdx75-mpss-pas";
+			reg = <0 0x04080000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx",
+					     "mss";
+
+			memory-region = <&mpssadsp_mem>, <&q6_mpss_dtb_mem>,
+					<&mpss_dsm_mem>, <&mpss_dsm_mem_2>,
+					<&qlink_logging_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_PING
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_PING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		sdhc: mmc@8804000 {
+			compatible = "qcom,sdx75-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x08804000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+			iommus = <&apps_smmu 0x00a0 0x0>;
+			qcom,dll-config = <0x0007442c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			interconnects = <&system_noc MASTER_SDCC_1 &mc_virt SLAVE_EBI1>,
+					<&gem_noc MASTER_APPSS_PROC &system_noc SLAVE_SDCC_1>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+			bus-width = <4>;
+			dma-coherent;
+
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0>;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		usb: usb@a6f8800 {
+			compatible = "qcom,sdx75-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 10 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_GDSC>;
+
+			resets = <&gcc GCC_USB30_BCR>;
+
+			interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &system_noc SLAVE_USB3 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			status = "disabled";
+
+			usb_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x80 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				phys = <&usb_hsphy>,
+				       <&usb_qmpphy>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sdx75-pdc", "qcom,pdc";
 			reg = <0x0 0xb220000 0x0 0x30000>,
@@ -471,6 +1112,17 @@
 			interrupt-controller;
 		};
 
+		aoss_qmp: power-management@c310000 {
+			compatible = "qcom,sdx75-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c310000 0 0x1000>;
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
 		spmi_bus: spmi@c400000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c400000 0x0 0x3000>,
@@ -505,6 +1157,145 @@
 			#interrupt-cells = <2>;
 			wakeup-parent = <&pdc>;
 
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio14", "gpio15";
+				function = "qup_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio110", "gpio111";
+				function = "qup_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio112", "gpio113";
+				function = "qup_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio116", "gpio117";
+				function = "qup_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio11";
+				function = "qup_se0";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup_se0";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio17";
+				function = "qup_se2";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio14", "gpio15", "gpio16";
+				function = "qup_se2";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio55";
+				function = "qup_se3";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup_se3";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio115";
+				function = "qup_se6";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio112", "gpio113", "gpio114";
+				function = "qup_se6";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio119";
+				function = "qup_se7";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio116", "gpio117", "gpio118";
+				function = "qup_se7";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_uart4_cts_rts: qup-uart4-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio52", "gpio53";
+				function = "qup_se3";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			qup_uart4_default: qup-uart4-default-state {
+				/* TX, RX */
+				pins = "gpio54", "gpio55";
+				function = "qup_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
 			qupv3_se1_2uart_active: qupv3-se1-2uart-active-state {
 				tx-pins {
 					pins = "gpio12";
@@ -527,6 +1318,46 @@
 				drive-strength = <2>;
 				bias-pull-down;
 			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		apps_smmu: iommu@15000000 {
@@ -650,7 +1481,7 @@
 				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 			qcom,tcs-offset = <0xd00>;
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS    3>,
@@ -733,6 +1564,20 @@
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
 		};
+
+		dc_noc: interconnect@190e0000 {
+			compatible = "qcom,sdx75-dc-noc";
+			reg = <0x0 0x190e0000 0x0 0x8200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,sdx75-gem-noc";
+			reg = <0x0 0x19100000 0x0 0x34080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
index 2c7a12983dae..9153a5a55ed9 100644
--- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -240,6 +240,7 @@
 };
 
 &usb_dwc3 {
+	/delete-property/ usb-role-switch;
 	maximum-speed = "high-speed";
 	dr_mode = "peripheral";
 
diff --git a/arch/arm64/boot/dts/qcom/sm4250.dtsi b/arch/arm64/boot/dts/qcom/sm4250.dtsi
index c5add8f44fc0..cd8c8e59976e 100644
--- a/arch/arm64/boot/dts/qcom/sm4250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm4250.dtsi
@@ -5,34 +5,73 @@
 
 #include "sm6115.dtsi"
 
-&CPU0 {
+&cpu0 {
 	compatible = "qcom,kryo240";
 };
 
-&CPU1 {
+&cpu1 {
 	compatible = "qcom,kryo240";
 };
 
-&CPU2 {
+&cpu2 {
 	compatible = "qcom,kryo240";
 };
 
-&CPU3 {
+&cpu3 {
 	compatible = "qcom,kryo240";
 };
 
-&CPU4 {
+&cpu4 {
 	compatible = "qcom,kryo240";
 };
 
-&CPU5 {
+&cpu5 {
 	compatible = "qcom,kryo240";
 };
 
-&CPU6 {
+&cpu6 {
 	compatible = "qcom,kryo240";
 };
 
-&CPU7 {
+&cpu7 {
 	compatible = "qcom,kryo240";
 };
+
+&lpass_tlmm {
+	compatible = "qcom,sm4250-lpass-lpi-pinctrl";
+	gpio-ranges = <&lpass_tlmm 0 0 27>;
+
+	lpi_i2s2_active: lpi-i2s2-active-state {
+		sck-pins {
+			pins = "gpio10";
+			function = "i2s2_clk";
+			bias-disable;
+			drive-strength = <8>;
+			output-high;
+		};
+
+		ws-pins {
+			pins = "gpio11";
+			function = "i2s2_ws";
+			bias-disable;
+			drive-strength = <8>;
+			output-high;
+		};
+
+		data-pins {
+			pins = "gpio12";
+			function = "i2s2_data";
+			bias-disable;
+			drive-strength = <8>;
+			output-high;
+		};
+
+		ext-mclk1-pins {
+			pins = "gpio18";
+			function = "ext_mclk1_a";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
index 00a1c81ca397..866e93783590 100644
--- a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
@@ -10,9 +10,23 @@
 	model = "Qualcomm Technologies, Inc. SM4450 QRD";
 	compatible = "qcom,sm4450-qrd", "qcom,sm4450";
 
-	aliases { };
+	aliases {
+		serial0 = &uart7;
+	};
 
 	chosen {
-		bootargs = "console=hvc0";
+		stdout-path = "serial0:115200n8";
 	};
 };
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>; /* NFC eSE SPI */
+};
+
+&uart7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
index c4e5b33f5169..d217d922811e 100644
--- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -3,8 +3,16 @@
  * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm4450-camcc.h>
+#include <dt-bindings/clock/qcom,sm4450-dispcc.h>
+#include <dt-bindings/clock/qcom,sm4450-gcc.h>
+#include <dt-bindings/clock/qcom,sm4450-gpucc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -14,7 +22,7 @@
 
 	chosen { };
 
-	clocks{
+	clocks {
 		xo_board: xo-board {
 			compatible = "fixed-clock";
 			clock-frequency = <76800000>;
@@ -23,32 +31,42 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
 	};
 
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-			power-domains = <&CPU_PD0>;
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 
-				L3_0: l3-cache {
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -56,164 +74,178 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_100>;
-			power-domains = <&CPU_PD0>;
+			next-level-cache = <&l2_100>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_200>;
-			power-domains = <&CPU_PD0>;
+			next-level-cache = <&l2_200>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_300>;
-			power-domains = <&CPU_PD0>;
+			next-level-cache = <&l2_300>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_400>;
-			power-domains = <&CPU_PD0>;
+			next-level-cache = <&l2_400>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_500>;
-			power-domains = <&CPU_PD0>;
+			next-level-cache = <&l2_500>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a78";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_600>;
-			power-domains = <&CPU_PD0>;
+			next-level-cache = <&l2_600>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a78";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_700>;
-			power-domains = <&CPU_PD0>;
+			next-level-cache = <&l2_700>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -221,7 +253,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x40000004>;
 				entry-latency-us = <800>;
@@ -230,7 +262,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x40000004>;
 				entry-latency-us = <600>;
@@ -241,7 +273,7 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			cluster_sleep_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
 				entry-latency-us = <1050>;
@@ -249,7 +281,7 @@
 				min-residency-us = <5309>;
 			};
 
-			CLUSTER_SLEEP_1: cluster-sleep-1 {
+			cluster_sleep_1: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41003344>;
 				entry-latency-us = <1561>;
@@ -265,66 +297,83 @@
 		reg = <0x0 0xa0000000 0x0 0x0>;
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CLUSTER_PD: power-domain-cpu-cluster0 {
+		cluster_pd: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
+			domain-idle-states = <&cluster_sleep_0>, <&cluster_sleep_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_cmd_db_mem: cmd-db@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
 		};
 	};
 
@@ -335,12 +384,84 @@
 		dma-ranges = <0 0 0 0 0x10 0>;
 		compatible = "simple-bus";
 
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm4450-gcc";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			uart7: serial@a88000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
 			#hwlock-cells = <1>;
 		};
 
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm4450-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,sm4450-camcc";
+			reg = <0x0 0x0ade0000 0x0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_CAMERA_AHB_CLK>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm4450-dispcc";
+			reg = <0x0 0x0af00000 0x0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm4450-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
@@ -351,6 +472,32 @@
 			interrupt-controller;
 		};
 
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm4450-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 137>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio23";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio22";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		intc: interrupt-controller@17200000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
@@ -419,6 +566,114 @@
 				status = "disabled";
 			};
 		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			label = "apps_rsc";
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
+			power-domains = <&cluster_pd>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm4450-rpmh-clk";
+				#clock-cells = <1>;
+				clocks = <&xo_board>;
+				clock-names = "xo";
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm4450-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_low_svs_l2: opp-96 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L2>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp-224 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm4450-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 98eb072fa912..ad347ccd1975 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -1,13 +1,16 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
- * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
+ * Copyright (c) 2023 - 2024, Dang Huynh <danct12@riseup.net>
  */
 
 /dts-v1/;
 
 #include "sm6115.dtsi"
 #include "pm6125.dtsi"
+#include "pmi632.dtsi"
 #include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
 
 / {
 	model = "F(x)tec Pro1X (QX1050)";
@@ -32,12 +35,48 @@
 		};
 	};
 
+	disp_elvdd_supply: disp-elvdd-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "disp_elvdd_supply";
+	};
+
+	disp_elvss_supply: disp-elvss-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "disp_elvss_supply";
+	};
+
+	disp_vcc_supply: disp-vcc-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "disp_vcc_supply";
+	};
+
+	disp_vci_supply: disp-vci-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "disp_vci_supply";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		pinctrl-0 = <&vol_up_n>;
+		pinctrl-0 = <&hall_sensor_n>, <&key_camera_n>, <&vol_up_n>;
 		pinctrl-names = "default";
 
+		hall-switch {
+			label = "Hall Switch";
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_KEYPAD_SLIDE>;
+			gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <90>;
+			wakeup-source;
+		};
+
+		key-camera {
+			label = "Camera Button";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+
 		key-volume-up {
 			label = "Volume Up";
 			linux,code = <KEY_VOLUMEUP>;
@@ -47,11 +86,119 @@
 			wakeup-source;
 		};
 	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		capslock-led {
+			label = "green:capslock";
+			function = LED_FUNCTION_CAPSLOCK;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pca9534 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "kbd-capslock";
+			default-state = "off";
+		};
+	};
+
+	ts_vdd_supply: ts-vdd-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_vdd_supply";
+		gpio = <&pca9534 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	ts_vddio_supply: ts-vddio-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_vddio_supply";
+		gpio = <&pca9534 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
-&dispcc {
-	/* HACK: disable until a panel driver is ready to retain simplefb */
-	status = "disabled";
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	pca9534: gpio@21 {
+		compatible = "nxp,pca9534";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
+	clock-frequency = <100000>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt9286";
+		reg = <0x14>;
+
+		interrupts-extended = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>;
+
+		irq-gpios = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&ts_vdd_supply>;
+		VDDIO-supply = <&ts_vddio_supply>;
+
+		pinctrl-0 = <&ts_int_n>, <&ts_rst_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm6125_l18a>;
+	status = "okay";
+
+	panel: panel@0 {
+		compatible = "boe,bf060y8m-aj0";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+
+		elvdd-supply = <&disp_elvdd_supply>;
+		elvss-supply = <&disp_elvss_supply>;
+		vcc-supply = <&disp_vcc_supply>;
+		vci-supply = <&disp_vci_supply>;
+		vddio-supply = <&pm6125_l9a>;
+
+		pinctrl-0 = <&mdss_dsi_n &panel_en_n>;
+		pinctrl-names = "default";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
 };
 
 &pm6125_gpios {
@@ -64,6 +211,73 @@
 	};
 };
 
+&pmi632_lpg {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pmi632_typec {
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		typec-power-opmode = "default";
+		pd-disable;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pmi632_hs_in: endpoint {
+					remote-endpoint = <&usb_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pmi632_ss_in: endpoint {
+					remote-endpoint = <&usb_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&pmi632_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <1000000>;
+	status = "okay";
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -73,6 +287,25 @@
 	status = "okay";
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm6115/Fxtec/QX1050/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm6115/Fxtec/QX1050/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm6115/Fxtec/QX1050/modem.mbn";
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -105,6 +338,7 @@
 		pm6125_l5a: l5 {
 			regulator-min-microvolt = <1648000>;
 			regulator-max-microvolt = <3056000>;
+			regulator-allow-set-load;
 		};
 
 		pm6125_l6a: l6 {
@@ -206,12 +440,84 @@
 	};
 };
 
+&sdc2_state_off {
+	cd-pins {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_state_on {
+	cd-pins {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_state_on>;
+	pinctrl-1 = <&sdc2_state_off>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&pm6125_l22a>;
+	vqmmc-supply = <&pm6125_l5a>;
+
+	status = "okay";
+};
+
 &sleep_clk {
 	clock-frequency = <32764>;
 };
 
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <14 4>;
+
+	key_camera_n: key-camera-n-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	panel_en_n: panel-en-n-state {
+		pins = "gpio65";
+		function = "gpio";
+		bias-disable;
+	};
+
+	ts_rst_n: ts-rst-n-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_int_n: ts-int-n-state {
+		pins = "gpio80";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	mdss_dsi_n: mdss-dsi-n-state {
+		pins = "gpio82";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	hall_sensor_n: hall-sensor-n-state {
+		pins = "gpio96";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &ufs_mem_hc {
@@ -233,9 +539,8 @@
 	status = "okay";
 };
 
-&usb_dwc3 {
-	maximum-speed = "high-speed";
-	dr_mode = "peripheral";
+&usb_dwc3_hs {
+	remote-endpoint = <&pmi632_hs_in>;
 };
 
 &usb_hsphy {
@@ -245,6 +550,27 @@
 	status = "okay";
 };
 
+&usb_qmpphy {
+	vdda-phy-supply = <&pm6125_l4a>;
+	vdda-pll-supply = <&pm6125_l12a>;
+	status = "okay";
+};
+
+&usb_qmpphy_out {
+	remote-endpoint = <&pmi632_ss_in>;
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pm6125_l8a>;
+	vdd-1.8-xo-supply = <&pm6125_l16a>;
+	vdd-1.3-rfa-supply = <&pm6125_l17a>;
+	vdd-3.3-ch0-supply = <&pm6125_l23a>;
+
+	qcom,calibration-variant = "Fxtec_QX1050";
+
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 839c60351240..91fc36b59abf 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm6115.h>
 #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
 #include <dt-bindings/clock/qcom,sm6115-gpucc.h>
@@ -10,8 +11,14 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
+#include <dt-bindings/interconnect/qcom,sm6115.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -37,7 +44,7 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x0>;
@@ -45,18 +52,18 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x1>;
@@ -64,13 +71,13 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x2>;
@@ -78,13 +85,13 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x3>;
@@ -92,13 +99,13 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 		};
 
-		CPU4: cpu@100 {
+		cpu4: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x100>;
@@ -106,18 +113,18 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
-			L2_1: l2-cache {
+			l2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU5: cpu@101 {
+		cpu5: cpu@101 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x101>;
@@ -125,13 +132,13 @@
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 		};
 
-		CPU6: cpu@102 {
+		cpu6: cpu@102 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x102>;
@@ -139,13 +146,13 @@
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 		};
 
-		CPU7: cpu@103 {
+		cpu7: cpu@103 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x103>;
@@ -153,46 +160,46 @@
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 			};
 
 			cluster1 {
 				core0 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core1 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core2 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core3 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -200,7 +207,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000003>;
@@ -210,7 +217,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000003>;
@@ -222,7 +229,7 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_0_SLEEP_0: cluster-sleep-0-0 {
+			cluster_0_sleep_0: cluster-sleep-0-0 {
 				/* GDHS */
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x40000022>;
@@ -231,7 +238,7 @@
 				min-residency-us = <782>;
 			};
 
-			CLUSTER_0_SLEEP_1: cluster-sleep-0-1 {
+			cluster_0_sleep_1: cluster-sleep-0-1 {
 				/* Power Collapse */
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
@@ -240,7 +247,7 @@
 				min-residency-us = <7376>;
 			};
 
-			CLUSTER_1_SLEEP_0: cluster-sleep-1-0 {
+			cluster_1_sleep_0: cluster-sleep-1-0 {
 				/* GDHS */
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x40000042>;
@@ -249,7 +256,7 @@
 				min-residency-us = <660>;
 			};
 
-			CLUSTER_1_SLEEP_1: cluster-sleep-1-1 {
+			cluster_1_sleep_1: cluster-sleep-1-1 {
 				/* Power Collapse */
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
@@ -264,6 +271,8 @@
 		scm: scm {
 			compatible = "qcom,scm-sm6115", "qcom,scm";
 			#reset-cells = <1>;
+			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
 		};
 	};
 
@@ -273,6 +282,25 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -282,62 +310,62 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_0_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_0_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_0_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_0_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_0_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_0_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_0_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_0_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_1_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_1_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_1_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_1_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_1_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_1_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_1_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_1_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CLUSTER_0_PD: power-domain-cpu-cluster0 {
+		cluster_0_pd: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_0_SLEEP_0>, <&CLUSTER_0_SLEEP_1>;
+			domain-idle-states = <&cluster_0_sleep_0>, <&cluster_0_sleep_1>;
 		};
 
-		CLUSTER_1_PD: power-domain-cpu-cluster1 {
+		cluster_1_pd: power-domain-cpu-cluster1 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_1_SLEEP_0>, <&CLUSTER_1_SLEEP_1>;
+			domain-idle-states = <&cluster_1_sleep_0>, <&cluster_1_sleep_1>;
 		};
 	};
 
@@ -352,7 +380,7 @@
 			mboxes = <&apcs_glb 0>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-sm6115";
+				compatible = "qcom,rpm-sm6115", "qcom,glink-smd-rpm";
 				qcom,glink-channels = "rpm_requests";
 
 				rpmcc: clock-controller {
@@ -591,6 +619,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs: syscon@3c0000 {
+			compatible = "qcom,sm6115-tcsr", "syscon";
+			reg = <0x0 0x003c0000 0x0 0x40000>;
+		};
+
 		tlmm: pinctrl@500000 {
 			compatible = "qcom,sm6115-tlmm";
 			reg = <0x0 0x00500000 0x0 0x400000>,
@@ -688,6 +721,13 @@
 				bias-pull-up;
 			};
 
+			qup_uart4_default: qup-uart4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			sdc1_state_on: sdc1-on-state {
 				clk-pins {
 					pins = "sdc1_clk";
@@ -779,6 +819,20 @@
 			};
 		};
 
+		lpass_tlmm: pinctrl@a7c0000 {
+			compatible = "qcom,sm6115-lpass-lpi-pinctrl";
+			reg = <0x0 0x0a7c0000 0x0 0x20000>,
+			      <0x0 0x0a950000 0x0 0x10000>;
+
+			clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 19>;
+
+		};
+
 		gcc: clock-controller@1400000 {
 			compatible = "qcom,gcc-sm6115";
 			reg = <0x0 0x01400000 0x0 0x1f0000>;
@@ -855,8 +909,68 @@
 			clock-output-names = "usb3_phy_pipe_clk_src";
 
 			#phy-cells = <0>;
+			orientation-switch;
+
+			qcom,tcsr-reg = <&tcsr_regs 0xb244>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_dwc3_ss>;
+					};
+				};
+			};
+		};
+
+		system_noc: interconnect@1880000 {
+			compatible = "qcom,sm6115-snoc";
+			reg = <0x0 0x01880000 0x0 0x5f080>;
+			clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&rpmcc RPM_SMD_IPA_CLK>;
+			clock-names = "cpu_axi",
+				      "ufs_axi",
+				      "usb_axi",
+				      "ipa";
+			#interconnect-cells = <2>;
+
+			clk_virt: interconnect-clk {
+				compatible = "qcom,sm6115-clk-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,sm6115-mmrt-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,sm6115-mmnrt-virt";
+				#interconnect-cells = <2>;
+			};
+		};
+
+		config_noc: interconnect@1900000 {
+			compatible = "qcom,sm6115-cnoc";
+			reg = <0x0 0x01900000 0x0 0x6200>;
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>;
+			clock-names = "usb_axi";
+			#interconnect-cells = <2>;
 		};
 
 		qfprom@1b40000 {
@@ -883,6 +997,60 @@
 			clock-names = "core";
 		};
 
+		pmu@1b8e300 {
+			compatible = "qcom,sm6115-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x01b8e300 0x0 0x600>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&bimc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ACTIVE_TAG>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <(1353 * 4 * 1000)>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+			};
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x01c40000 0x0 0x1100>,
@@ -912,6 +1080,12 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		bimc: interconnect@4480000 {
+			compatible = "qcom,sm6115-bimc";
+			reg = <0x0 0x04480000 0x0 0x80000>;
+			#interconnect-cells = <2>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
@@ -939,8 +1113,45 @@
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
 			clock-names = "iface", "core", "xo", "ice";
 
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			iommus = <&apps_smmu 0x00c0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			bus-width = <8>;
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <102400 65000>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+			};
 		};
 
 		sdhc_2: mmc@4784000 {
@@ -961,6 +1172,12 @@
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0x00a0 0x0>;
 			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			bus-width = <4>;
 			qcom,dll-config = <0x0007642c>;
@@ -973,21 +1190,25 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <261438 150000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
 
-		ufs_mem_hc: ufs@4804000 {
+		ufs_mem_hc: ufshc@4804000 {
 			compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <1>;
 			#reset-cells = <1>;
@@ -1028,24 +1249,23 @@
 
 		ufs_mem_phy: phy@4807000 {
 			compatible = "qcom,sm6115-qmp-ufs-phy";
-			reg = <0x0 0x04807000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x04807000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_CLKREF_CLK>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 
-			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-			clock-names = "ref", "ref_aux";
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@4807400 {
-				reg = <0x0 0x04807400 0x0 0x098>,
-				      <0x0 0x04807600 0x0 0x130>,
-				      <0x0 0x04807c00 0x0 0x16c>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		gpi_dma0: dma-controller@4a00000 {
@@ -1091,6 +1311,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1107,6 +1336,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1123,6 +1361,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1139,6 +1386,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1155,6 +1411,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1171,6 +1436,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1187,6 +1461,15 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1203,11 +1486,37 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};
 
+			uart3: serial@4a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				power-domains = <&rpmpd SM6115_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				status = "disabled";
+			};
+
 			i2c4: i2c@4a90000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a90000 0x0 0x4000>;
@@ -1219,6 +1528,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1235,6 +1553,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1245,7 +1572,15 @@
 				reg = <0x0 0x04a90000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart4_default>;
 				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1260,6 +1595,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1276,6 +1620,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1301,13 +1654,25 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <66666667>;
 
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
-			qcom,select-utmi-as-pipe-clk;
+			 /* TODO: USB<->IPA path */
+			interconnects = <&system_noc MASTER_USB3 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
 			status = "disabled";
 
 			usb_dwc3: usb@4e00000 {
@@ -1322,6 +1687,29 @@
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
+				snps,parkmode-disable-ss-quirk;
+
+				usb-role-switch;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_qmpphy_usb_ss_in>;
+						};
+					};
+				};
 			};
 		};
 
@@ -1353,6 +1741,7 @@
 
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -1478,6 +1867,13 @@
 			iommus = <&apps_smmu 0x420 0x2>,
 				 <&apps_smmu 0x421 0x0>;
 
+			interconnects = <&mmrt_virt MASTER_MDP_PORT0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -1487,7 +1883,7 @@
 			mdp: display-controller@5e01000 {
 				compatible = "qcom,sm6115-dpu";
 				reg = <0x0 0x05e01000 0x0 0x8f000>,
-				      <0x0 0x05eb0000 0x0 0x2008>;
+				      <0x0 0x05eb0000 0x0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -1574,7 +1970,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd SM6115_VDDCX>;
@@ -1648,8 +2045,8 @@
 			reg = <0x0 0x05f00000 0 0x20000>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -1658,7 +2055,7 @@
 
 		remoteproc_mpss: remoteproc@6080000 {
 			compatible = "qcom,sm6115-mpss-pas";
-			reg = <0x0 0x06080000 0x0 0x100>;
+			reg = <0x0 0x06080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2036,7 +2433,7 @@
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 
 			status = "disabled";
 
@@ -2057,7 +2454,7 @@
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 
 			status = "disabled";
 
@@ -2078,7 +2475,7 @@
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 
 			status = "disabled";
 
@@ -2099,7 +2496,7 @@
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 
 			status = "disabled";
 
@@ -2120,7 +2517,7 @@
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
 
-			cpu = <&CPU4>;
+			cpu = <&cpu4>;
 
 			status = "disabled";
 
@@ -2141,7 +2538,7 @@
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
 
-			cpu = <&CPU5>;
+			cpu = <&cpu5>;
 
 			status = "disabled";
 
@@ -2162,7 +2559,7 @@
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
 
-			cpu = <&CPU6>;
+			cpu = <&cpu6>;
 
 			status = "disabled";
 
@@ -2183,7 +2580,7 @@
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
 
-			cpu = <&CPU7>;
+			cpu = <&cpu7>;
 
 			status = "disabled";
 
@@ -2301,9 +2698,9 @@
 			};
 		};
 
-		remoteproc_adsp: remoteproc@ab00000 {
+		remoteproc_adsp: remoteproc@a400000 {
 			compatible = "qcom,sm6115-adsp-pas";
-			reg = <0x0 0x0ab00000 0x0 0x100>;
+			reg = <0x0 0x0a400000 0x0 0x4040>;
 
 			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
 					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2332,6 +2729,76 @@
 				qcom,remote-pid = <2>;
 				mboxes = <&apcs_glb 8>;
 
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1c1 0x0>;
+
+							dai@0 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+							};
+
+							dai@1 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
+							};
+
+							dai@2 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
 				fastrpc {
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
@@ -2375,7 +2842,7 @@
 
 		remoteproc_cdsp: remoteproc@b300000 {
 			compatible = "qcom,sm6115-cdsp-pas";
-			reg = <0x0 0x0b300000 0x0 0x100000>;
+			reg = <0x0 0x0b300000 0x0 0x4040>;
 
 			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
 					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2566,54 +3033,54 @@
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0 0x0f120000 0x0 0x1000>;
 			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x0 0x0 0x20000000>;
 			clock-frequency = <19200000>;
 
 			frame@f121000 {
-				reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>;
+				reg = <0x0 0x0f121000 0x1000>, <0x0 0x0f122000 0x1000>;
 				frame-number = <0>;
 				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			frame@f123000 {
-				reg = <0x0 0x0f123000 0x0 0x1000>;
+				reg = <0x0 0x0f123000 0x1000>;
 				frame-number = <1>;
 				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f124000 {
-				reg = <0x0 0x0f124000 0x0 0x1000>;
+				reg = <0x0 0x0f124000 0x1000>;
 				frame-number = <2>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f125000 {
-				reg = <0x0 0x0f125000 0x0 0x1000>;
+				reg = <0x0 0x0f125000 0x1000>;
 				frame-number = <3>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f126000 {
-				reg = <0x0 0x0f126000 0x0 0x1000>;
+				reg = <0x0 0x0f126000 0x1000>;
 				frame-number = <4>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f127000 {
-				reg = <0x0 0x0f127000 0x0 0x1000>;
+				reg = <0x0 0x0f127000 0x1000>;
 				frame-number = <5>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f128000 {
-				reg = <0x0 0x0f128000 0x0 0x1000>;
+				reg = <0x0 0x0f128000 0x1000>;
 				frame-number = <6>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -2648,8 +3115,6 @@
 
 	thermal-zones {
 		mapss-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -2668,8 +3133,6 @@
 		};
 
 		cdsp-hvx-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
@@ -2688,8 +3151,6 @@
 		};
 
 		wlan-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
@@ -2708,8 +3169,6 @@
 		};
 
 		camera-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
@@ -2728,8 +3187,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
@@ -2748,8 +3205,6 @@
 		};
 
 		modem1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
@@ -2768,8 +3223,6 @@
 		};
 
 		cpu4-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
@@ -2785,7 +3238,7 @@
 					type = "passive";
 				};
 
-				cpu4_crit: cpu_crit {
+				cpu4_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -2794,8 +3247,6 @@
 		};
 
 		cpu5-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
@@ -2811,7 +3262,7 @@
 					type = "passive";
 				};
 
-				cpu5_crit: cpu_crit {
+				cpu5_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -2820,8 +3271,6 @@
 		};
 
 		cpu6-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -2837,7 +3286,7 @@
 					type = "passive";
 				};
 
-				cpu6_crit: cpu_crit {
+				cpu6_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -2846,8 +3295,6 @@
 		};
 
 		cpu7-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
@@ -2863,7 +3310,7 @@
 					type = "passive";
 				};
 
-				cpu7_crit: cpu_crit {
+				cpu7_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -2872,8 +3319,6 @@
 		};
 
 		cpu45-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
@@ -2889,7 +3334,7 @@
 					type = "passive";
 				};
 
-				cpu45_crit: cpu_crit {
+				cpu45_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -2898,8 +3343,6 @@
 		};
 
 		cpu67-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
@@ -2915,7 +3358,7 @@
 					type = "passive";
 				};
 
-				cpu67_crit: cpu_crit {
+				cpu67_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -2924,8 +3367,6 @@
 		};
 
 		cpu0123-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
@@ -2941,7 +3382,7 @@
 					type = "passive";
 				};
 
-				cpu0123_crit: cpu_crit {
+				cpu0123_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -2950,8 +3391,6 @@
 		};
 
 		modem0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
@@ -2970,8 +3409,6 @@
 		};
 
 		display-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 14>;
 
 			trips {
@@ -2990,21 +3427,28 @@
 		};
 
 		gpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+			polling-delay-passive = <250>;
+
 			thermal-sensors = <&tsens0 15>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
-					temperature = <115000>;
-					hysteresis = <5000>;
+				gpu_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <125000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "critical";
 				};
 			};
 		};
diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
index 54da053a8042..c17545111f49 100644
--- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
@@ -359,6 +359,7 @@
 };
 
 &usb_dwc3 {
+	/delete-property/ usb-role-switch;
 	maximum-speed = "high-speed";
 	dr_mode = "peripheral";
 
@@ -378,7 +379,7 @@
 	vdd-1.8-xo-supply = <&pm6125_l16>;
 	vdd-1.3-rfa-supply = <&pm6125_l17>;
 	vdd-3.3-ch0-supply = <&pm6125_l23>;
-	qcom,ath10k-calibration-variant = "Lenovo_P11";
+	qcom,calibration-variant = "Lenovo_P11";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 08046f866f60..dcd05f303b78 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -90,8 +90,6 @@
 
 	thermal-zones {
 		rf-pa0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 0>;
 
 			trips {
@@ -104,8 +102,6 @@
 		};
 
 		quiet-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <5000>;
 			thermal-sensors = <&pm6125_adc_tm 1>;
 
 			trips {
@@ -118,8 +114,6 @@
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 2>;
 
 			trips {
@@ -132,8 +126,6 @@
 		};
 
 		rf-pa1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 3>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts
new file mode 100644
index 000000000000..68a237215bd1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Gabriel Gonzales <semfault@disroot.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "sm6125.dtsi"
+#include "pm6125.dtsi"
+
+/ {
+	model = "Xiaomi Redmi Note 8";
+	compatible = "xiaomi,ginkgo", "qcom,sm6125";
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <QCOM_ID_SM6125>;
+	qcom,board-id = <22 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (2340 * 1080 * 4)>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	reserved-memory {
+		debug_mem: debug@ffb00000 {
+			reg = <0x0 0xffb00000 0x0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: lastlog@ffbc0000 {
+			reg = <0x0 0xffbc0000 0x0 0x80000>;
+			no-map;
+		};
+
+		pstore_mem: ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc40000 0x0 0xc0000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			pmsg-size = <0x20000>;
+		};
+
+		cmdline_mem: memory@ffd00000 {
+			reg = <0x0 0xffd40000 0x0 0x1000>;
+			no-map;
+		};
+	};
+
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm6125_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+};
+
+&pm6125_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&vreg_l7a>;
+	vdda-pll-supply = <&vreg_l10a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <936000>;
+			regulator-max-microvolt = <1422000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+		};
+
+		vreg_l2a: l2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1056000>;
+		};
+
+		vreg_l3a: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1064000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1996000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1248000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1264000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2856000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&vreg_l24a>;
+	vqmmc-supply = <&vreg_l11a>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <22 2>, <28 6>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	extcon = <&extcon_usb>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
index a49d3ebb1931..994fb0412fcb 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
@@ -84,8 +84,6 @@
 
 	thermal-zones {
 		rf-pa0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 0>;
 
 			trips {
@@ -98,8 +96,6 @@
 		};
 
 		quiet-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <5000>;
 			thermal-sensors = <&pm6125_adc_tm 1>;
 
 			trips {
@@ -112,8 +108,6 @@
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 2>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index eb07eca3a48d..8f2d65543373 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sm6125.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm6125.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -28,7 +29,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			clock-output-names = "sleep_clk";
 		};
 	};
@@ -37,122 +38,122 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
+			next-level-cache = <&l2_0>;
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 		};
 
-		CPU4: cpu@100 {
+		cpu4: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1638>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
+			next-level-cache = <&l2_1>;
+			l2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
 			};
 		};
 
-		CPU5: cpu@101 {
+		cpu5: cpu@101 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1638>;
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 		};
 
-		CPU6: cpu@102 {
+		cpu6: cpu@102 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1638>;
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 		};
 
-		CPU7: cpu@103 {
+		cpu7: cpu@103 {
 			device_type = "cpu";
 			compatible = "qcom,kryo260";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1638>;
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 			};
 
 			cluster1 {
 				core0 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core1 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core2 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core3 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -192,7 +193,7 @@
 			mboxes = <&apcs_glb 0>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-sm6125";
+				compatible = "qcom,rpm-sm6125", "qcom,glink-smd-rpm";
 				qcom,glink-channels = "rpm_requests";
 
 				rpmcc: clock-controller {
@@ -763,7 +764,7 @@
 			status = "disabled";
 		};
 
-		ufs_mem_hc: ufs@4804000 {
+		ufs_mem_hc: ufshc@4804000 {
 			compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
 			reg-names = "std", "ice";
@@ -812,10 +813,12 @@
 			compatible = "qcom,sm6125-qmp-ufs-phy";
 			reg = <0x04807000 0xdb8>;
 
-			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_CLK>;
 			clock-names = "ref",
-				      "ref_aux";
+				      "ref_aux",
+				      "qref";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
@@ -1185,6 +1188,15 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <66666667>;
 
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
+
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
@@ -1198,6 +1210,8 @@
 				phy-names = "usb2-phy";
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				maximum-speed = "high-speed";
 				dr_mode = "peripheral";
 			};
@@ -1237,7 +1251,7 @@
 			mdss_mdp: display-controller@5e01000 {
 				compatible = "qcom,sm6125-dpu";
 				reg = <0x05e01000 0x83208>,
-				      <0x05eb0000 0x2008>;
+				      <0x05eb0000 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				interrupt-parent = <&mdss>;
@@ -1327,7 +1341,8 @@
 					      "bus";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd SM6125_VDDCX>;
@@ -1402,8 +1417,8 @@
 			reg = <0x05f00000 0x20000>;
 
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <0>,
 				 <0>,
 				 <0>,
@@ -1577,10 +1592,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 1 0xf08
-			      GIC_PPI 2 0xf08
-			      GIC_PPI 3 0xf08
-			      GIC_PPI 0 0xf08>;
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <19200000>;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sm6150.dtsi b/arch/arm64/boot/dts/qcom/sm6150.dtsi
new file mode 100644
index 000000000000..3d2a1cb02b62
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6150.dtsi
@@ -0,0 +1,4466 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,qcs615-camcc.h>
+#include <dt-bindings/clock/qcom,qcs615-dispcc.h>
+#include <dt-bindings/clock/qcom,qcs615-gcc.h>
+#include <dt-bindings/clock/qcom,qcs615-gpucc.h>
+#include <dt-bindings/clock/qcom,qcs615-videocc.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,qcs615-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&l2_0>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+
+			l2_0: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&l2_100>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			l2_100: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&l2_200>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			l2_200: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&l2_300>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			l2_300: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd4>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&l2_400>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			l2_400: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd5>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&l2_500>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			l2_500: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd6>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1740>;
+			dynamic-power-coefficient = <404>;
+			next-level-cache = <&l2_600>;
+			clocks = <&cpufreq_hw 1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+
+			l2_600: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd7>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1740>;
+			dynamic-power-coefficient = <404>;
+			next-level-cache = <&l2_700>;
+			clocks = <&cpufreq_hw 1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			l2_700: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+
+	dummy_eud: dummy-sink {
+		compatible = "arm,coresight-dummy-sink";
+
+		in-ports {
+			port {
+				eud_in: endpoint {
+					remote-endpoint = <&replicator_swao_out1>;
+				};
+			};
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+
+		little_cpu_sleep_0: cpu-sleep-0-0 {
+			compatible = "arm,idle-state";
+			idle-state-name = "silver-power-collapse";
+			arm,psci-suspend-param = <0x40000003>;
+			entry-latency-us = <549>;
+			exit-latency-us = <901>;
+			min-residency-us = <1774>;
+			local-timer-stop;
+		};
+
+		little_cpu_sleep_1: cpu-sleep-0-1 {
+			compatible = "arm,idle-state";
+			idle-state-name = "silver-rail-power-collapse";
+			arm,psci-suspend-param = <0x40000004>;
+			entry-latency-us = <702>;
+			exit-latency-us = <915>;
+			min-residency-us = <4001>;
+			local-timer-stop;
+		};
+
+		big_cpu_sleep_0: cpu-sleep-1-0 {
+			compatible = "arm,idle-state";
+			idle-state-name = "gold-power-collapse";
+			arm,psci-suspend-param = <0x40000003>;
+			entry-latency-us = <523>;
+			exit-latency-us = <1244>;
+			min-residency-us = <2207>;
+			local-timer-stop;
+		};
+
+		big_cpu_sleep_1: cpu-sleep-1-1 {
+			compatible = "arm,idle-state";
+			idle-state-name = "gold-rail-power-collapse";
+			arm,psci-suspend-param = <0x40000004>;
+			entry-latency-us = <526>;
+			exit-latency-us = <1854>;
+			min-residency-us = <5555>;
+			local-timer-stop;
+		};
+	};
+
+	domain-idle-states {
+		cluster_sleep_0: cluster-sleep-0 {
+			compatible = "domain-idle-state";
+			arm,psci-suspend-param = <0x41000044>;
+			entry-latency-us = <2752>;
+			exit-latency-us = <3048>;
+			min-residency-us = <6118>;
+		};
+
+		cluster_sleep_1: cluster-sleep-1 {
+			compatible = "domain-idle-state";
+			arm,psci-suspend-param = <0x41001344>;
+			entry-latency-us = <3263>;
+			exit-latency-us = <4562>;
+			min-residency-us = <8467>;
+		};
+
+		cluster_sleep_2: cluster-sleep-2 {
+			compatible = "domain-idle-state";
+			arm,psci-suspend-param = <0x4100b344>;
+			entry-latency-us = <3638>;
+			exit-latency-us = <6562>;
+			min-residency-us = <9826>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-qcs615", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
+		};
+	};
+
+	camnoc_virt: interconnect-0 {
+		compatible = "qcom,qcs615-camnoc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	ipa_virt: interconnect-1 {
+		compatible = "qcom,qcs615-ipa-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-2 {
+		compatible = "qcom,qcs615-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+		/* On this platform, bit 26 (normally SLPI) is repurposed for ADSP */
+		mboxes = <&apss_shared 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cluster_pd: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_0
+					      &cluster_sleep_1
+					      &cluster_sleep_2>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_cmd_db_mem: aop-cmd-db@85f20000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x85f20000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_region: smem@86000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		pil_video_mem: pil-video@93400000 {
+			reg = <0x0 0x93400000 0x0 0x500000>;
+			no-map;
+		};
+
+		rproc_cdsp_mem: rproc-cdsp@93b00000 {
+			reg = <0x0 0x93b00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		rproc_adsp_mem: rproc-adsp@95900000 {
+			reg = <0x0 0x95900000 0x0 0x1e00000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,qcs615-gcc";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		qfprom: efuse@780000 {
+			compatible = "qcom,qcs615-qfprom", "qcom,qfprom";
+			reg = <0x0 0x00780000 0x0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@1f8 {
+				reg = <0x1fb 0x1>;
+				bits = <1 4>;
+			};
+		};
+
+		rng@793000 {
+			compatible = "qcom,qcs615-trng", "qcom,trng";
+			reg = <0x0 0x00793000 0x0 0x1000>;
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x007c4000 0x0 0x1000>,
+			      <0x0 0x007c5000 0x0 0x1000>,
+			      <0x0 0x007c8000 0x0 0x8000>;
+			reg-names = "hc",
+				    "cqhci",
+				    "ice";
+
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo",
+				      "ice";
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			iommus = <&apps_smmu 0x02c0 0x0>;
+			interconnects = <&aggre1_noc MASTER_SDCC_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDCC_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			qcom,dll-config = <0x000f642c>;
+			qcom,ddr-config = <0x80040868>;
+			supports-cqe;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@800000  {
+			compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0x0 0x800000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <8>;
+			dma-channel-mask = <0xf>;
+			iommus = <&apps_smmu 0xd6 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			iommus = <&apps_smmu 0xc3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			uart0: serial@880000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00880000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_tx>, <&qup_uart0_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x884000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x888000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+				interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart2: serial@888000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>,
+					    <&qup_uart2_tx>, <&qup_uart2_rx>;
+				pinctrl-names = "default";
+				interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x88c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0x0 0xa00000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <8>;
+			dma-channel-mask = <0xf>;
+			iommus = <&apps_smmu 0x376 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xac0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			iommus = <&apps_smmu 0x363 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			i2c4: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi4: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart4: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>,
+					    <&qup_uart4_tx>, <&qup_uart4_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			i2c6: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi6: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart6: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>,
+					    <&qup_uart6_tx>, <&qup_uart6_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi7: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart7: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>,
+					    <&qup_uart7_tx>, <&qup_uart7_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			reg = <0x0 0x01500000 0x0 0x5080>;
+			compatible = "qcom,qcs615-config-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			reg = <0x0 0x01620000 0x0 0x1f300>;
+			compatible = "qcom,qcs615-system-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@1700000 {
+			reg = <0x0 0x01700000 0x0 0x3f200>;
+			compatible = "qcom,qcs615-aggre1-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			reg = <0x0 0x01740000 0x0 0x1c100>;
+			compatible = "qcom,qcs615-mmss-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie: pcie@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-qcs615", "qcom,pcie-sm8150";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40100000 0x0 0x100000>,
+			      <0x0 0x01c0b000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <0>;
+			num-lanes = <1>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a";
+			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre1_noc MASTER_PCIE QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0 &apps_smmu 0x400 0x1>,
+				    <0x100 &apps_smmu 0x401 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie_phy>;
+			phy-names = "pciephy";
+
+			max-link-speed = <2>;
+
+			operating-points-v2 = <&pcie_opp_table>;
+
+			status = "disabled";
+
+			pcie_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+			};
+
+			pcie_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+				bus-range = <0x01 0xff>;
+			};
+		};
+
+		pcie_phy: phy@1c0e000 {
+			compatible = "qcom,qcs615-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x01c0e000 0x0 0x1000>;
+
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,qcs615-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>,
+			      <0x0 0x01d90000 0x0 0x8000>;
+			reg-names = "std",
+				    "ice";
+
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "ice_core_clk";
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			operating-points-v2 = <&ufs_opp_table>;
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0x300 0x0>;
+			dma-coherent;
+
+			lanes-per-direction = <1>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			#reset-cells = <1>;
+
+			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,qcs615-qmp-ufs-phy", "qcom,sm6115-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_CLK>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <16>;
+			qcom,num-ees = <4>;
+			iommus = <&apps_smmu 0x0104 0x0011>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,qcs615-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x0104 0x0011>;
+			interconnects = <&aggre1_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,qcs615-tcsr", "syscon";
+			reg = <0x0 0x01fc0000 0x0 0x30000>;
+		};
+
+		tlmm: pinctrl@3100000 {
+			compatible = "qcom,qcs615-tlmm";
+			reg = <0x0 0x03100000 0x0 0x300000>,
+			      <0x0 0x03500000 0x0 0x300000>,
+			      <0x0 0x03d00000 0x0 0x300000>;
+			reg-names = "east",
+				    "west",
+				    "south";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 124>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				pins = "gpio4", "gpio5";
+				function = "qup0";
+
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				pins = "gpio18", "gpio19";
+				function = "qup0";
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				pins = "gpio20", "gpio21";
+				function = "qup1";
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				pins = "gpio14", "gpio15";
+				function = "qup1";
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				pins = "gpio6", "gpio7";
+				function = "qup1";
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				pins = "gpio10", "gpio11";
+				function = "qup1";
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup0";
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio3";
+				function = "qup0";
+			};
+
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
+				pins = "gpio3";
+				function = "gpio";
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup1";
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio23";
+				function = "qup1";
+			};
+
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
+				pins = "gpio23";
+				function = "gpio";
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				pins = "gpio6", "gpio7", "gpio8";
+				function = "qup1";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio9";
+				function = "qup1";
+			};
+
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+				pins = "gpio9";
+				function = "gpio";
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				pins = "gpio10", "gpio11", "gpio12";
+				function = "qup1";
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio13";
+				function = "qup1";
+			};
+
+			qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
+				pins = "gpio13";
+				function = "gpio";
+			};
+
+			qup_uart0_tx: qup-uart0-tx-state {
+				pins = "gpio16";
+				function = "qup0";
+			};
+
+			qup_uart0_rx: qup-uart0-rx-state {
+				pins = "gpio17";
+				function = "qup0";
+			};
+
+			qup_uart2_cts: qup-uart2-cts-state {
+				pins = "gpio0";
+				function = "qup0";
+			};
+
+			qup_uart2_rts: qup-uart2-rts-state {
+				pins = "gpio1";
+				function = "qup0";
+			};
+
+			qup_uart2_tx: qup-uart2-tx-state {
+				pins = "gpio2";
+				function = "qup0";
+			};
+
+			qup_uart2_rx: qup-uart2-rx-state {
+				pins = "gpio3";
+				function = "qup0";
+			};
+
+			qup_uart4_cts: qup-uart4-cts-state {
+				pins = "gpio20";
+				function = "qup1";
+			};
+
+			qup_uart4_rts: qup-uart4-rts-state {
+				pins = "gpio21";
+				function = "qup1";
+			};
+
+			qup_uart4_tx: qup-uart4-tx-state {
+				pins = "gpio22";
+				function = "qup1";
+			};
+
+			qup_uart4_rx: qup-uart4-rx-state {
+				pins = "gpio23";
+				function = "qup1";
+			};
+
+			qup_uart6_cts: qup-uart6-cts-state {
+				pins = "gpio6";
+				function = "qup1";
+			};
+
+			qup_uart6_rts: qup-uart6-rts-state {
+				pins = "gpio7";
+				function = "qup1";
+			};
+
+			qup_uart6_tx: qup-uart6-tx-state {
+				pins = "gpio8";
+				function = "qup1";
+			};
+
+			qup_uart6_rx: qup-uart6-rx-state {
+				pins = "gpio9";
+				function = "qup1";
+			};
+
+			qup_uart7_cts: qup-uart7-cts-state {
+				pins = "gpio10";
+				function = "qup1";
+			};
+
+			qup_uart7_rts: qup-uart7-rts-state {
+				pins = "gpio11";
+				function = "qup1";
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio12";
+				function = "qup1";
+			};
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio13";
+				function = "qup1";
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@5090000 {
+			compatible = "qcom,qcs615-gpucc";
+			reg = <0 0x05090000 0 0x9000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GPLL0>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x0 0x06002000 0x0 0x1000>,
+			      <0x0 0x16280000 0x0 0x180000>;
+			reg-names = "stm-base",
+				    "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel_in0_in7>;
+					};
+				};
+			};
+		};
+
+		tpda@6004000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x06004000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					tpda_qdss_in0: endpoint {
+						remote-endpoint = <&tpdm_center_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					tpda_qdss_in4: endpoint {
+						remote-endpoint = <&funnel_monaq_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					tpda_qdss_in5: endpoint {
+						remote-endpoint = <&funnel_ddr_0_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					tpda_qdss_in6: endpoint {
+						remote-endpoint = <&funnel_turing_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					tpda_qdss_in7: endpoint {
+						remote-endpoint = <&tpdm_vsense_out>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+
+					tpda_qdss_in8: endpoint {
+						remote-endpoint = <&tpdm_dcc_out>;
+					};
+				};
+
+				port@9 {
+					reg = <9>;
+
+					tpda_qdss_in9: endpoint {
+						remote-endpoint = <&tpdm_prng_out>;
+					};
+				};
+
+				port@b {
+					reg = <11>;
+
+					tpda_qdss_in11: endpoint {
+						remote-endpoint = <&tpdm_qm_out>;
+					};
+				};
+
+				port@c {
+					reg = <12>;
+
+					tpda_qdss_in12: endpoint {
+						remote-endpoint = <&tpdm_west_out>;
+					};
+				};
+
+				port@d {
+					reg = <13>;
+
+					tpda_qdss_in13: endpoint {
+						remote-endpoint = <&tpdm_pimem_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tpda_qdss_out: endpoint {
+						remote-endpoint = <&funnel_qatb_in>;
+					};
+				};
+			};
+		};
+
+		funnel@6005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06005000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					funnel_qatb_in: endpoint {
+						remote-endpoint = <&tpda_qdss_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_qatb_out: endpoint {
+						remote-endpoint = <&funnel_in0_in6>;
+					};
+				};
+			};
+		};
+
+		cti@6010000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06010000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6011000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06011000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6012000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06012000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6013000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06013000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6014000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06014000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6015000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06015000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6016000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06016000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6017000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06017000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6018000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06018000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6019000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06019000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@601a000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0601a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@601b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0601b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@601c000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0601c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@601d000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0601d000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@601e000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0601e000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@601f000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0601f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06041000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+
+					funnel_in0_in6: endpoint {
+						remote-endpoint = <&funnel_qatb_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel_in0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_in0_out: endpoint {
+						remote-endpoint = <&funnel_merg_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06042000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@3 {
+					reg = <3>;
+
+					funnel_in1_in3: endpoint {
+						remote-endpoint = <&replicator_swao_out0>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					funnel_in1_in4: endpoint {
+						remote-endpoint = <&tpdm_wcss_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel_in1_in7: endpoint {
+						remote-endpoint = <&funnel_apss_merg_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_in1_out: endpoint {
+						remote-endpoint = <&funnel_merg_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06045000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					funnel_merg_in0: endpoint {
+						remote-endpoint = <&funnel_in0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					funnel_merg_in1: endpoint {
+						remote-endpoint = <&funnel_in1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_merg_out: endpoint {
+						remote-endpoint = <&tmc_etf_in>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x06046000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator0_in: endpoint {
+						remote-endpoint = <&tmc_etf_out>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+
+					replicator0_out1: endpoint {
+						remote-endpoint = <&replicator1_in>;
+					};
+				};
+			};
+		};
+
+		tmc@6047000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x06047000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tmc_etf_in: endpoint {
+						remote-endpoint = <&funnel_merg_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tmc_etf_out: endpoint {
+						remote-endpoint = <&replicator0_in>;
+					};
+				};
+			};
+		};
+
+		replicator@604a000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x0604a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			in-ports {
+				port {
+					replicator1_in: endpoint {
+						remote-endpoint = <&replicator0_out1>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					replicator1_out: endpoint {
+						remote-endpoint = <&funnel_swao_in6>;
+					};
+				};
+			};
+		};
+
+		cti@683b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0683b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@6840000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06840000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_vsense_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@684c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x0684c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_prng_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in9>;
+					};
+				};
+			};
+		};
+
+		tpdm@6850000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06850000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_pimem_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in13>;
+					};
+				};
+			};
+		};
+
+		tpdm@6860000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06860000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_turing_out: endpoint {
+						remote-endpoint = <&funnel_turing_in>;
+					};
+				};
+			};
+		};
+
+		funnel@6861000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06861000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					funnel_turing_in: endpoint {
+						remote-endpoint = <&tpdm_turing_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_turing_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in6>;
+					};
+				};
+			};
+		};
+
+		cti@6867000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06867000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@6870000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06870000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_dcc_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in8>;
+					};
+				};
+			};
+		};
+
+		tpdm@699c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x0699c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_wcss_out: endpoint {
+						remote-endpoint = <&funnel_in1_in4>;
+					};
+				};
+			};
+		};
+
+		tpdm@69c0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x069c0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_monaq_out: endpoint {
+						remote-endpoint = <&funnel_monaq_in>;
+					};
+				};
+			};
+		};
+
+		funnel@69c3000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x069c3000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					funnel_monaq_in: endpoint {
+						remote-endpoint = <&tpdm_monaq_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_monaq_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in4>;
+					};
+				};
+			};
+		};
+
+		tpdm@69d0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x069d0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_qm_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in11>;
+					};
+				};
+			};
+		};
+
+		tpdm@6a00000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06a00000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_ddr_out: endpoint {
+						remote-endpoint = <&funnel_ddr_0_in>;
+					};
+				};
+			};
+		};
+
+		cti@6a02000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06a02000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6a03000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06a03000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6a10000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06a10000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6a11000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06a11000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		funnel@6a05000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06a05000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					funnel_ddr_0_in: endpoint {
+						remote-endpoint = <&tpdm_ddr_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_ddr_0_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in5>;
+					};
+				};
+			};
+		};
+
+		tpda@6b01000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x06b01000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					tpda_swao_in0: endpoint {
+						remote-endpoint = <&tpdm_swao0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					tpda_swao_in1: endpoint {
+						remote-endpoint = <&tpdm_swao1_out>;
+					};
+
+				};
+			};
+
+			out-ports {
+				port {
+					tpda_swao_out: endpoint {
+						remote-endpoint = <&funnel_swao_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@6b02000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06b02000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_swao0_out: endpoint {
+						remote-endpoint = <&tpda_swao_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@6b03000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06b03000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_swao1_out: endpoint {
+						remote-endpoint = <&tpda_swao_in1>;
+					};
+				};
+			};
+		};
+
+		cti@6b04000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6b05000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b05000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6b06000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b06000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6b07000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b07000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		funnel@6b08000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06b08000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+
+					funnel_swao_in6: endpoint {
+						remote-endpoint = <&replicator1_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel_swao_in7: endpoint {
+						remote-endpoint = <&tpda_swao_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_swao_out: endpoint {
+						remote-endpoint = <&tmc_etf_swao_in>;
+					};
+				};
+			};
+		};
+
+		tmc@6b09000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x06b09000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tmc_etf_swao_in: endpoint {
+						remote-endpoint = <&funnel_swao_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tmc_etf_swao_out: endpoint {
+						remote-endpoint = <&replicator_swao_in>;
+					};
+				};
+			};
+		};
+
+		replicator@6b0a000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x06b0a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator_swao_in: endpoint {
+						remote-endpoint = <&tmc_etf_swao_out>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					replicator_swao_out0: endpoint {
+						remote-endpoint = <&funnel_in1_in3>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					replicator_swao_out1: endpoint {
+						remote-endpoint = <&eud_in>;
+					};
+				};
+			};
+		};
+
+		cti@6b21000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b21000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@6b48000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06b48000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_west_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in12>;
+					};
+				};
+			};
+		};
+
+		cti@6c13000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06c13000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			/* Not all required clocks can be enabled from the OS */
+			status = "fail";
+		};
+
+		cti@6c20000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06c20000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		tpdm@6c28000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06c28000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_center_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in0>;
+					};
+				};
+			};
+		};
+
+		cti@6c29000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06c29000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6c2a000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06c2a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@7020000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07020000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7040000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07040000 0x0 0x1000>;
+			cpu = <&cpu0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&funnel_apss_in0>;
+					};
+				};
+			};
+		};
+
+		cti@7120000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07120000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7140000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07140000 0x0 0x1000>;
+			cpu = <&cpu1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&funnel_apss_in1>;
+					};
+				};
+			};
+		};
+
+		cti@7220000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07220000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7240000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07240000 0x0 0x1000>;
+			cpu = <&cpu2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&funnel_apss_in2>;
+					};
+				};
+			};
+		};
+
+		cti@7320000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07320000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7340000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07340000 0x0 0x1000>;
+			cpu = <&cpu3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&funnel_apss_in3>;
+					};
+				};
+			};
+		};
+
+		cti@7420000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07420000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7440000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07440000 0x0 0x1000>;
+			cpu = <&cpu4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&funnel_apss_in4>;
+					};
+				};
+			};
+		};
+
+		cti@7520000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07520000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7540000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07540000 0x0 0x1000>;
+			cpu = <&cpu5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&funnel_apss_in5>;
+					};
+				};
+			};
+		};
+
+		cti@7620000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07620000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7640000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07640000 0x0 0x1000>;
+			cpu = <&cpu6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&funnel_apss_in6>;
+					};
+				};
+			};
+		};
+
+		cti@7720000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07720000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7740000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07740000 0x0 0x1000>;
+			cpu = <&cpu7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&funnel_apss_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x07800000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					funnel_apss_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					funnel_apss_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					funnel_apss_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					funnel_apss_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					funnel_apss_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					funnel_apss_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					funnel_apss_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel_apss_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_apss_out: endpoint {
+						remote-endpoint = <&funnel_apss_merg_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x07810000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					funnel_apss_merg_in0: endpoint {
+						remote-endpoint = <&funnel_apss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					funnel_apss_merg_in2: endpoint {
+						remote-endpoint = <&tpda_olc_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					funnel_apss_merg_in3: endpoint {
+						remote-endpoint = <&tpda_llm_silver_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					funnel_apss_merg_in4: endpoint {
+						remote-endpoint = <&tpda_llm_gold_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					funnel_apss_merg_in5: endpoint {
+						remote-endpoint = <&tpda_apss_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_apss_merg_out: endpoint {
+						remote-endpoint = <&funnel_in1_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@7830000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x07830000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_olc_out: endpoint {
+						remote-endpoint = <&tpda_olc_in>;
+					};
+				};
+			};
+		};
+
+		tpda@7832000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x07832000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpda_olc_in: endpoint {
+						remote-endpoint = <&tpdm_olc_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tpda_olc_out: endpoint {
+						remote-endpoint = <&funnel_apss_merg_in2>;
+					};
+				};
+			};
+		};
+
+		tpdm@7860000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x07860000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_apss_out: endpoint {
+						remote-endpoint = <&tpda_apss_in>;
+					};
+				};
+			};
+		};
+
+		tpda@7862000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x07862000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpda_apss_in: endpoint {
+						remote-endpoint = <&tpdm_apss_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tpda_apss_out: endpoint {
+						remote-endpoint = <&funnel_apss_merg_in5>;
+					};
+				};
+			};
+		};
+
+		tpdm@78a0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x078a0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_llm_silver_out: endpoint {
+						remote-endpoint = <&tpda_llm_silver_in>;
+					};
+				};
+			};
+		};
+
+		tpdm@78b0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x078b0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_llm_gold_out: endpoint {
+						remote-endpoint = <&tpda_llm_gold_in>;
+					};
+				};
+			};
+		};
+
+		tpda@78c0000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x078c0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpda_llm_silver_in: endpoint {
+						remote-endpoint = <&tpdm_llm_silver_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tpda_llm_silver_out: endpoint {
+						remote-endpoint = <&funnel_apss_merg_in3>;
+					};
+				};
+			};
+		};
+
+		tpda@78d0000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x078d0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpda_llm_gold_in: endpoint {
+						remote-endpoint = <&tpdm_llm_gold_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tpda_llm_gold_out: endpoint {
+						remote-endpoint = <&funnel_apss_merg_in4>;
+					};
+				};
+			};
+		};
+
+		cti@78e0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x078e0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@78f0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x078f0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@7900000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07900000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		remoteproc_cdsp: remoteproc@8300000 {
+			compatible = "qcom,qcs615-cdsp-pas", "qcom,sm8150-cdsp-pas";
+			reg = <0x0 0x08300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			power-domain-names = "cx";
+
+			memory-region = <&rproc_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&apss_shared 4>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1081 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1082 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1083 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1084 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1085 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1086 0x0>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+
+		pmu@90b6300 {
+			compatible = "qcom,qcs615-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x090b6300 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <12896000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <14928000>;
+				};
+			};
+		};
+
+		pmu@90cd000 {
+			compatible = "qcom,qcs615-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0x0 0x090cd000 0x0 0x1000>;
+			interrupts = <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <800000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <1200000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <1804800>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <2188800>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <2726400>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <3072000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <4070400>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <5414400>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <6220800>;
+				};
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x08804000 0x0 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			iommus = <&apps_smmu 0x02a0 0x0>;
+			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&aggre1_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		dc_noc: interconnect@9160000 {
+			reg = <0x0 0x09160000 0x0 0x3200>;
+			compatible = "qcom,qcs615-dc-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		llcc: system-cache-controller@9200000 {
+			compatible = "qcom,qcs615-llcc";
+			reg = <0x0 0x09200000 0x0 0x50000>,
+			      <0x0 0x09600000 0x0 0x50000>;
+			reg-names = "llcc0_base",
+				    "llcc_broadcast_base";
+		};
+
+		gem_noc: interconnect@9680000 {
+			reg = <0x0 0x09680000 0x0 0x3e200>;
+			compatible = "qcom,qcs615-gem-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		venus: video-codec@aa00000 {
+			compatible = "qcom,qcs615-venus", "qcom,sc7180-venus";
+			reg = <0x0 0x0aa00000 0x0 0x100000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "bus",
+				      "vcodec0_core",
+				      "vcodec0_bus";
+
+			power-domains = <&videocc VENUS_GDSC>,
+					<&videocc VCODEC0_GDSC>,
+					<&rpmhpd RPMHPD_CX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "cx";
+
+			operating-points-v2 = <&venus_opp_table>;
+
+			interconnects = <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "video-mem",
+					     "cpu-cfg";
+
+			iommus = <&apps_smmu 0xe60 0x20>;
+
+			memory-region = <&pil_video_mem>;
+
+			status = "disabled";
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133330000 {
+					opp-hz = /bits/ 64 <133330000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-380000000 {
+					opp-hz = /bits/ 64 <380000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-410000000 {
+					opp-hz = /bits/ 64 <410000000>;
+					required-opps = <&rpmhpd_opp_nom_l1>;
+				};
+
+				opp-460000000 {
+					opp-hz = /bits/ 64 <460000000>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,qcs615-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,qcs615-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,qcs615-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,qcs615-pdc", "qcom,pdc";
+			reg = <0x0 0x0b220000 0x0 0x30000>,
+			      <0x0 0x17c000f0 0x0 0x64>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,qcs615-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apss_shared 0>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
+		sram@14680000 {
+			compatible = "qcom,qcs615-imem", "syscon", "simple-mfd";
+			reg = <0x0 0x14680000 0x0 0x2c000>;
+			ranges = <0 0 0x14680000 0x2c000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@2a94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x2a94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,qcs615-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			dma-coherent;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <0>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		apss_shared: mailbox@17c00000 {
+			compatible = "qcom,qcs615-apss-shared",
+				     "qcom,sdm845-apss-shared";
+			reg = <0x0 0x17c00000 0x0 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog: watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-qcs615", "qcom,kpss-wdt";
+			reg = <0x0 0x17c10000 0x0 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17c21000 {
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17c23000 {
+				reg = <0x17c23000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				reg = <0x17c25000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				reg = <0x17c27000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				reg = <0x17c29000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				reg = <0x17c2b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				reg = <0x17c2d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			qcom,drv-id = <2>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,tcs-config = <ACTIVE_TCS    2>,
+					  <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>,
+					  <CONTROL_TCS   1>;
+
+			label = "apps_rsc";
+			power-domains = <&cluster_pd>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,qcs615-rpmh-clk";
+				clocks = <&xo_board_clk>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,qcs615-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-0 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp-2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp-3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e2000 {
+			compatible = "qcom,qcs615-qusb2-phy";
+			reg = <0x0 0x88e2000 0x0 0x180>;
+
+			clocks = <&gcc GCC_AHB2PHY_WEST_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_hsphy_2: phy@88e3000 {
+			compatible = "qcom,qcs615-qusb2-phy";
+			reg = <0x0 0x088e3000 0x0 0x180>;
+
+			clocks = <&gcc GCC_AHB2PHY_WEST_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb",
+				      "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@88e6000 {
+			compatible = "qcom,qcs615-qmp-usb3-phy";
+			reg = <0x0 0x88e6000 0x0 0x1000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_AHB2PHY_WEST_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			qcom,tcsr-reg = <&tcsr 0xb244>;
+
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,qcs615-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
+
+				iommus = <&apps_smmu 0x140 0x0>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+				phys = <&usb_1_hsphy>, <&usb_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+			};
+		};
+
+		usb_2: usb@a8f8800 {
+			compatible = "qcom,qcs615-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a8f8800 0x0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_SEC_AXI_CLK>,
+				 <&gcc GCC_USB20_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB2_SEC_AXI_CLK>,
+				 <&gcc GCC_USB20_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB20_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB2_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB20_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
+
+			power-domains = <&gcc USB20_SEC_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB20_SEC_BCR>;
+
+			qcom,select-utmi-as-pipe-clk;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_2_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a800000 0x0 0xcd00>;
+
+				iommus = <&apps_smmu 0xe0 0x0>;
+				interrupts = <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>;
+
+				phys = <&usb_hsphy_2>;
+				phy-names = "usb2-phy";
+
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+
+				maximum-speed = "high-speed";
+			};
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,qcs615-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c263000 0x0 0x1000>,
+			      <0x0 0x0c222000 0x0 0x1000>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		remoteproc_adsp: remoteproc@62400000 {
+			compatible = "qcom,qcs615-adsp-pas", "qcom,sm8150-adsp-pas";
+			reg = <0x0 0x62400000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			power-domain-names = "cx";
+
+			memory-region = <&rproc_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink_edge: glink-edge {
+				interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&apss_shared 24>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1723 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1724 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1725 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1726 0x0>;
+						qcom,nsessions = <5>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,qcs615-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	arch_timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	thermal-zones {
+		aoss-thermal {
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss-0-thermal {
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpuss0-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss-1-thermal {
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpuss1-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss-2-thermal {
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpuss2-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss-3-thermal {
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpuss3-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-1-0-thermal {
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-1-1-thermal {
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-1-2-thermal {
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-1-3-thermal {
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				gpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				q6-hvx-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-core-thermal {
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				mdm-core-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				camera-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wlan-thermal {
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				wlan-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		display-thermal {
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				display-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				video-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index dddd6e44d280..8848043f95f2 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -293,7 +293,7 @@
 		compatible = "samsung,s6sy761";
 		reg = <0x48>;
 		interrupt-parent = <&tlmm>;
-		interrupts = <22 0x2008>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&pm6350_l11>;
 		avdd-supply = <&touch_en_vreg>;
 
@@ -375,14 +375,22 @@
 };
 
 &usb_1_dwc3 {
+	/delete-property/ usb-role-switch;
 	maximum-speed = "super-speed";
 	dr_mode = "peripheral";
 };
 
 &usb_1_hsphy {
+	vdd-supply = <&pm6350_l18>;
+	vdda-phy-dpdm-supply = <&pm6350_l3>;
+	vdda-pll-supply = <&pm6350_l2>;
+
 	status = "okay";
 };
 
 &usb_1_qmpphy {
+	vdda-phy-supply = <&pm6350_l16>;
+	vdda-pll-supply = <&pm6350_l22>;
+
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 8fd6f4d03490..8459b27cacc7 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sm6350.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm6350.h>
 #include <dt-bindings/clock/qcom,gpucc-sm6350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -18,7 +19,10 @@
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -44,7 +48,7 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x0>;
@@ -52,21 +56,21 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
 					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -74,7 +78,7 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x100>;
@@ -82,24 +86,24 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
-			next-level-cache = <&L2_100>;
+			next-level-cache = <&l2_100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
 					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x200>;
@@ -107,24 +111,24 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
-			next-level-cache = <&L2_200>;
+			next-level-cache = <&l2_200>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
 					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x300>;
@@ -132,24 +136,24 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
-			next-level-cache = <&L2_300>;
+			next-level-cache = <&l2_300>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
 					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x400>;
@@ -157,24 +161,24 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
-			next-level-cache = <&L2_400>;
+			next-level-cache = <&l2_400>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
 					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x500>;
@@ -182,24 +186,24 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
-			next-level-cache = <&L2_500>;
+			next-level-cache = <&l2_500>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
 					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x600>;
@@ -207,24 +211,24 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1894>;
 			dynamic-power-coefficient = <703>;
-			next-level-cache = <&L2_600>;
+			next-level-cache = <&l2_600>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
 					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x700>;
@@ -232,61 +236,61 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1894>;
 			dynamic-power-coefficient = <703>;
-			next-level-cache = <&L2_700>;
+			next-level-cache = <&l2_700>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
 					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_PC: cluster-sleep-0 {
+			cluster_sleep_pc: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
 				entry-latency-us = <2752>;
@@ -294,7 +298,7 @@
 				min-residency-us = <6118>;
 			};
 
-			CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
+			cluster_sleep_cx_ret: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41001244>;
 				entry-latency-us = <3638>;
@@ -302,7 +306,7 @@
 				min-residency-us = <8467>;
 			};
 
-			CLUSTER_AOSS_SLEEP: cluster-sleep-2 {
+			cluster_aoss_sleep: cluster-sleep-2 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100b244>;
 				entry-latency-us = <3263>;
@@ -314,7 +318,7 @@
 		cpu_idle_states: idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-power-collapse";
 				arm,psci-suspend-param = <0x40000003>;
@@ -324,7 +328,7 @@
 				local-timer-stop;
 			};
 
-			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+			little_cpu_sleep_1: cpu-sleep-0-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -334,7 +338,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-power-collapse";
 				arm,psci-suspend-param = <0x40000003>;
@@ -344,7 +348,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+			big_cpu_sleep_1: cpu-sleep-1-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -503,59 +507,59 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CLUSTER_PD: power-domain-cpu-cluster0 {
+		cluster_pd: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_PC
-					      &CLUSTER_SLEEP_CX_RET
-					      &CLUSTER_AOSS_SLEEP>;
+			domain-idle-states = <&cluster_sleep_pc
+					      &cluster_sleep_cx_ret
+					      &cluster_aoss_sleep>;
 		};
 	};
 
@@ -565,114 +569,114 @@
 		ranges;
 
 		hyp_mem: memory@80000000 {
-			reg = <0 0x80000000 0 0x600000>;
+			reg = <0x0 0x80000000 0x0 0x600000>;
 			no-map;
 		};
 
 		xbl_aop_mem: memory@80700000 {
-			reg = <0 0x80700000 0 0x160000>;
+			reg = <0x0 0x80700000 0x0 0x160000>;
 			no-map;
 		};
 
 		cmd_db: memory@80860000 {
 			compatible = "qcom,cmd-db";
-			reg = <0 0x80860000 0 0x20000>;
+			reg = <0x0 0x80860000 0x0 0x20000>;
 			no-map;
 		};
 
 		sec_apps_mem: memory@808ff000 {
-			reg = <0 0x808ff000 0 0x1000>;
+			reg = <0x0 0x808ff000 0x0 0x1000>;
 			no-map;
 		};
 
 		smem_mem: memory@80900000 {
-			reg = <0 0x80900000 0 0x200000>;
+			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
 
 		cdsp_sec_mem: memory@80b00000 {
-			reg = <0 0x80b00000 0 0x1e00000>;
+			reg = <0x0 0x80b00000 0x0 0x1e00000>;
 			no-map;
 		};
 
 		pil_camera_mem: memory@86000000 {
-			reg = <0 0x86000000 0 0x500000>;
+			reg = <0x0 0x86000000 0x0 0x500000>;
 			no-map;
 		};
 
 		pil_npu_mem: memory@86500000 {
-			reg = <0 0x86500000 0 0x500000>;
+			reg = <0x0 0x86500000 0x0 0x500000>;
 			no-map;
 		};
 
 		pil_video_mem: memory@86a00000 {
-			reg = <0 0x86a00000 0 0x500000>;
+			reg = <0x0 0x86a00000 0x0 0x500000>;
 			no-map;
 		};
 
 		pil_cdsp_mem: memory@86f00000 {
-			reg = <0 0x86f00000 0 0x1e00000>;
+			reg = <0x0 0x86f00000 0x0 0x1e00000>;
 			no-map;
 		};
 
 		pil_adsp_mem: memory@88d00000 {
-			reg = <0 0x88d00000 0 0x2800000>;
+			reg = <0x0 0x88d00000 0x0 0x2800000>;
 			no-map;
 		};
 
 		wlan_fw_mem: memory@8b500000 {
-			reg = <0 0x8b500000 0 0x200000>;
+			reg = <0x0 0x8b500000 0x0 0x200000>;
 			no-map;
 		};
 
 		pil_ipa_fw_mem: memory@8b700000 {
-			reg = <0 0x8b700000 0 0x10000>;
+			reg = <0x0 0x8b700000 0x0 0x10000>;
 			no-map;
 		};
 
 		pil_ipa_gsi_mem: memory@8b710000 {
-			reg = <0 0x8b710000 0 0x5400>;
+			reg = <0x0 0x8b710000 0x0 0x5400>;
 			no-map;
 		};
 
 		pil_modem_mem: memory@8b800000 {
-			reg = <0 0x8b800000 0 0xf800000>;
+			reg = <0x0 0x8b800000 0x0 0xf800000>;
 			no-map;
 		};
 
 		cont_splash_memory: memory@a0000000 {
-			reg = <0 0xa0000000 0 0x2300000>;
+			reg = <0x0 0xa0000000 0x0 0x2300000>;
 			no-map;
 		};
 
 		dfps_data_memory: memory@a2300000 {
-			reg = <0 0xa2300000 0 0x100000>;
+			reg = <0x0 0xa2300000 0x0 0x100000>;
 			no-map;
 		};
 
 		removed_region: memory@c0000000 {
-			reg = <0 0xc0000000 0 0x3900000>;
+			reg = <0x0 0xc0000000 0x0 0x3900000>;
 			no-map;
 		};
 
 		pil_gpu_mem: memory@f0d00000 {
-			reg = <0 0xf0d00000 0 0x1000>;
+			reg = <0x0 0xf0d00000 0x0 0x1000>;
 			no-map;
 		};
 
 		debug_region: memory@ffb00000 {
-			reg = <0 0xffb00000 0 0xc0000>;
+			reg = <0x0 0xffb00000 0x0 0xc0000>;
 			no-map;
 		};
 
 		last_log_region: memory@ffbc0000 {
-			reg = <0 0xffbc0000 0 0x40000>;
+			reg = <0x0 0xffbc0000 0x0 0x40000>;
 			no-map;
 		};
 
 		ramoops: ramoops@ffc00000 {
 			compatible = "ramoops";
-			reg = <0 0xffc00000 0 0x100000>;
+			reg = <0x0 0xffc00000 0x0 0x100000>;
 			record-size = <0x1000>;
 			console-size = <0x40000>;
 			pmsg-size = <0x20000>;
@@ -681,7 +685,7 @@
 		};
 
 		cmdline_region: memory@ffd00000 {
-			reg = <0 0xffd00000 0 0x1000>;
+			reg = <0x0 0xffd00000 0x0 0x1000>;
 			no-map;
 		};
 	};
@@ -785,7 +789,7 @@
 
 		gcc: clock-controller@100000 {
 			compatible = "qcom,gcc-sm6350";
-			reg = <0 0x00100000 0 0x1f0000>;
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -799,7 +803,7 @@
 
 		ipcc: mailbox@408000 {
 			compatible = "qcom,sm6350-ipcc", "qcom,ipcc";
-			reg = <0 0x00408000 0 0x1000>;
+			reg = <0x0 0x00408000 0x0 0x1000>;
 			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -808,7 +812,7 @@
 
 		qfprom: qfprom@784000 {
 			compatible = "qcom,sm6350-qfprom", "qcom,qfprom";
-			reg = <0 0x00784000 0 0x3000>;
+			reg = <0x0 0x00784000 0x0 0x3000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
@@ -820,16 +824,16 @@
 
 		rng: rng@793000 {
 			compatible = "qcom,prng-ee";
-			reg = <0 0x00793000 0 0x1000>;
+			reg = <0x0 0x00793000 0x0 0x1000>;
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
 
 		sdhc_1: mmc@7c4000 {
 			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0 0x007c4000 0 0x1000>,
-				<0 0x007c5000 0 0x1000>,
-				<0 0x007c8000 0 0x8000>;
+			reg = <0x0 0x007c4000 0x0 0x1000>,
+			      <0x0 0x007c5000 0x0 0x1000>,
+			      <0x0 0x007c8000 0x0 0x8000>;
 			reg-names = "hc", "cqhci", "ice";
 
 			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
@@ -874,7 +878,7 @@
 
 		gpi_dma0: dma-controller@800000 {
 			compatible = "qcom,sm6350-gpi-dma";
-			reg = <0 0x00800000 0 0x60000>;
+			reg = <0x0 0x00800000 0x0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -906,7 +910,7 @@
 
 			i2c0: i2c@880000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00880000 0 0x4000>;
+				reg = <0x0 0x00880000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				pinctrl-names = "default";
@@ -926,7 +930,7 @@
 
 			uart1: serial@884000 {
 				compatible = "qcom,geni-uart";
-				reg = <0 0x00884000 0 0x4000>;
+				reg = <0x0 0x00884000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				pinctrl-names = "default";
@@ -935,14 +939,14 @@
 				power-domains = <&rpmhpd SM6350_CX>;
 				operating-points-v2 = <&qup_opp_table>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
 			i2c2: i2c@888000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00888000 0 0x4000>;
+				reg = <0x0 0x00888000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				pinctrl-names = "default";
@@ -963,7 +967,7 @@
 
 		gpi_dma1: dma-controller@900000 {
 			compatible = "qcom,sm6350-gpi-dma";
-			reg = <0 0x00900000 0 0x60000>;
+			reg = <0x0 0x00900000 0x0 0x60000>;
 			interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 646 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 647 IRQ_TYPE_LEVEL_HIGH>,
@@ -995,7 +999,7 @@
 
 			i2c6: i2c@980000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00980000 0 0x4000>;
+				reg = <0x0 0x00980000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				pinctrl-names = "default";
@@ -1015,7 +1019,7 @@
 
 			i2c7: i2c@984000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00984000 0 0x4000>;
+				reg = <0x0 0x00984000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				pinctrl-names = "default";
@@ -1035,7 +1039,7 @@
 
 			i2c8: i2c@988000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00988000 0 0x4000>;
+				reg = <0x0 0x00988000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				pinctrl-names = "default";
@@ -1055,7 +1059,7 @@
 
 			uart9: serial@98c000 {
 				compatible = "qcom,geni-debug-uart";
-				reg = <0 0x0098c000 0 0x4000>;
+				reg = <0x0 0x0098c000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				pinctrl-names = "default";
@@ -1069,7 +1073,7 @@
 
 			i2c10: i2c@990000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00990000 0 0x4000>;
+				reg = <0x0 0x00990000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				pinctrl-names = "default";
@@ -1090,14 +1094,14 @@
 
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sm6350-config-noc";
-			reg = <0 0x01500000 0 0x28000>;
+			reg = <0x0 0x01500000 0x0 0x28000>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		system_noc: interconnect@1620000 {
 			compatible = "qcom,sm6350-system-noc";
-			reg = <0 0x01620000 0 0x17080>;
+			reg = <0x0 0x01620000 0x0 0x17080>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 
@@ -1110,14 +1114,14 @@
 
 		aggre1_noc: interconnect@16e0000 {
 			compatible = "qcom,sm6350-aggre1-noc";
-			reg = <0 0x016e0000 0 0x15080>;
+			reg = <0x0 0x016e0000 0x0 0x15080>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		aggre2_noc: interconnect@1700000 {
 			compatible = "qcom,sm6350-aggre2-noc";
-			reg = <0 0x01700000 0 0x1f880>;
+			reg = <0x0 0x01700000 0x0 0x1f880>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 
@@ -1130,19 +1134,19 @@
 
 		mmss_noc: interconnect@1740000 {
 			compatible = "qcom,sm6350-mmss-noc";
-			reg = <0 0x01740000 0 0x1c100>;
+			reg = <0x0 0x01740000 0x0 0x1c100>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		ufs_mem_hc: ufs@1d84000 {
+		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm6350-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
-			reg = <0 0x01d84000 0 0x3000>,
-			      <0 0x01d90000 0 0x8000>;
+			reg = <0x0 0x01d84000 0x0 0x3000>,
+			      <0x0 0x01d90000 0x0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -1187,29 +1191,54 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm6350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x01d87000 0x0 0x1000>;
 
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_CLK>;
 			clock-names = "ref",
-				      "ref_aux";
-			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+				      "ref_aux",
+				      "qref";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
+			#phy-cells = <0>;
+
 			status = "disabled";
+		};
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x128>,
-				      <0 0x01d87600 0 0x1fc>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x128>,
-				      <0 0x01d87a00 0 0x1fc>;
-				#phy-cells = <0>;
-			};
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <16>;
+			qcom,num-ees = <4>;
+			iommus = <&apps_smmu 0x426 0x11>,
+				 <&apps_smmu 0x432 0x0>,
+				 <&apps_smmu 0x436 0x11>,
+				 <&apps_smmu 0x438 0x1>,
+				 <&apps_smmu 0x43f 0x0>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm6350-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x426 0x11>,
+				 <&apps_smmu 0x432 0x0>,
+				 <&apps_smmu 0x436 0x11>,
+				 <&apps_smmu 0x438 0x1>,
+				 <&apps_smmu 0x43f 0x0>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
 		};
 
 		ipa: ipa@1e40000 {
@@ -1217,9 +1246,9 @@
 
 			iommus = <&apps_smmu 0x440 0x0>,
 				 <&apps_smmu 0x442 0x0>;
-			reg = <0 0x01e40000 0 0x8000>,
-			      <0 0x01e50000 0 0x3000>,
-			      <0 0x01e04000 0 0x23000>;
+			reg = <0x0 0x01e40000 0x0 0x8000>,
+			      <0x0 0x01e50000 0x0 0x3000>,
+			      <0x0 0x01e04000 0x0 0x23000>;
 			reg-names = "ipa-reg",
 				    "ipa-shared",
 				    "gsi";
@@ -1257,9 +1286,9 @@
 
 		adsp: remoteproc@3000000 {
 			compatible = "qcom,sm6350-adsp-pas";
-			reg = <0 0x03000000 0 0x100>;
+			reg = <0x0 0x03000000 0x0 0x10000>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -1293,10 +1322,75 @@
 				label = "lpass";
 				qcom,remote-pid = <2>;
 
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+
+						q6usbdai: usbd {
+							compatible = "qcom,q6usb";
+							iommus = <&apps_smmu 0x100f 0x0>;
+							#sound-dai-cells = <1>;
+							qcom,usb-audio-intr-idx = /bits/ 16 <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1001 0x0>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
 				fastrpc {
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "adsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -1324,8 +1418,8 @@
 
 		gpu: gpu@3d00000 {
 			compatible = "qcom,adreno-619.0", "qcom,adreno";
-			reg = <0 0x03d00000 0 0x40000>,
-			      <0 0x03d9e000 0 0x1000>;
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>;
 			reg-names = "kgsl_3d0_reg_memory",
 				    "cx_mem";
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
@@ -1335,10 +1429,11 @@
 			qcom,gmu = <&gmu>;
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&pil_gpu_mem>;
 			};
 
@@ -1348,50 +1443,50 @@
 				opp-850000000 {
 					opp-hz = /bits/ 64 <850000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x03>;
 				};
 
 				opp-800000000 {
 					opp-hz = /bits/ 64 <800000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					opp-supported-hw = <0x04>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-650000000 {
 					opp-hz = /bits/ 64 <650000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					opp-supported-hw = <0x08>;
+					opp-supported-hw = <0x0f>;
 				};
 
 				opp-565000000 {
 					opp-hz = /bits/ 64 <565000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					opp-supported-hw = <0x10>;
+					opp-supported-hw = <0x1f>;
 				};
 
 				opp-430000000 {
 					opp-hz = /bits/ 64 <430000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					opp-supported-hw = <0xff>;
+					opp-supported-hw = <0x1f>;
 				};
 
 				opp-355000000 {
 					opp-hz = /bits/ 64 <355000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					opp-supported-hw = <0xff>;
+					opp-supported-hw = <0x1f>;
 				};
 
 				opp-253000000 {
 					opp-hz = /bits/ 64 <253000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					opp-supported-hw = <0xff>;
+					opp-supported-hw = <0x1f>;
 				};
 			};
 		};
 
 		adreno_smmu: iommu@3d40000 {
 			compatible = "qcom,sm6350-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
-			reg = <0 0x03d40000 0 0x10000>;
+			reg = <0x0 0x03d40000 0x0 0x10000>;
 			#iommu-cells = <1>;
 			#global-interrupts = <2>;
 			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
@@ -1417,9 +1512,9 @@
 
 		gmu: gmu@3d6a000 {
 			compatible = "qcom,adreno-gmu-619.0", "qcom,adreno-gmu";
-			reg = <0 0x03d6a000 0 0x31000>,
-			      <0 0x0b290000 0 0x10000>,
-			      <0 0x0b490000 0 0x10000>;
+			reg = <0x0 0x03d6a000 0x0 0x31000>,
+			      <0x0 0x0b290000 0x0 0x10000>,
+			      <0x0 0x0b490000 0x0 0x10000>;
 			reg-names = "gmu",
 				    "gmu_pdc",
 				    "gmu_pdc_seq";
@@ -1449,8 +1544,6 @@
 
 			operating-points-v2 = <&gmu_opp_table>;
 
-			status = "disabled";
-
 			gmu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -1463,7 +1556,7 @@
 
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,sm6350-gpucc";
-			reg = <0 0x03d90000 0 0x9000>;
+			reg = <0x0 0x03d90000 0x0 0x9000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_GPU_GPLL0_CLK>,
 				 <&gcc GCC_GPU_GPLL0_DIV_CLK>;
@@ -1477,7 +1570,7 @@
 
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,sm6350-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1517,9 +1610,9 @@
 
 		cdsp: remoteproc@8300000 {
 			compatible = "qcom,sm6350-cdsp-pas";
-			reg = <0 0x08300000 0 0x10000>;
+			reg = <0x0 0x08300000 0x0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -1557,6 +1650,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "cdsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -1615,7 +1709,7 @@
 
 		sdhc_2: mmc@8804000 {
 			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0 0x08804000 0 0x1000>;
+			reg = <0x0 0x08804000 0x0 0x1000>;
 
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
@@ -1664,7 +1758,7 @@
 
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sm6350-qusb2-phy", "qcom,qusb2-v2-phy";
-			reg = <0 0x088e3000 0 0x400>;
+			reg = <0x0 0x088e3000 0x0 0x400>;
 			status = "disabled";
 			#phy-cells = <0>;
 
@@ -1676,7 +1770,7 @@
 
 		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sm6350-qmp-usb3-dp-phy";
-			reg = <0 0x088e8000 0 0x3000>;
+			reg = <0x0 0x088e8000 0x0 0x3000>;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
@@ -1690,35 +1784,64 @@
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
+			orientation-switch;
+
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		dc_noc: interconnect@9160000 {
 			compatible = "qcom,sm6350-dc-noc";
-			reg = <0 0x09160000 0 0x3200>;
+			reg = <0x0 0x09160000 0x0 0x3200>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sm6350-llcc";
-			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
+			reg = <0x0 0x09200000 0x0 0x50000>, <0x0 0x09600000 0x0 0x50000>;
 			reg-names = "llcc0_base", "llcc_broadcast_base";
 		};
 
 		gem_noc: interconnect@9680000 {
 			compatible = "qcom,sm6350-gem-noc";
-			reg = <0 0x09680000 0 0x3e200>;
+			reg = <0x0 0x09680000 0x0 0x3e200>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		npu_noc: interconnect@9990000 {
 			compatible = "qcom,sm6350-npu-noc";
-			reg = <0 0x09990000 0 0x1600>;
+			reg = <0x0 0x09990000 0x0 0x1600>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
@@ -1822,7 +1945,7 @@
 
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sm6350-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
 			status = "disabled";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -1840,12 +1963,15 @@
 				      "mock_utmi";
 
 			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
-
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -1857,21 +1983,60 @@
 
 			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xcd00>;
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x540 0x0>;
+				num-hc-interrupters = /bits/ 16 <3>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,parkmode-disable-ss-quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+				usb-role-switch;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs_out: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
+					};
+				};
 			};
 		};
 
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,sm6350-videocc";
+			reg = <0x0 0x0aaf0000 0x0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>;
+			clock-names = "iface",
+				      "bi_tcxo",
+				      "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		cci0: cci@ac4a000 {
 			compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
-			reg = <0 0x0ac4a000 0 0x1000>;
+			reg = <0x0 0x0ac4a000 0x0 0x1000>;
 			interrupts = <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>;
 			power-domains = <&camcc TITAN_TOP_GDSC>;
 
@@ -1918,7 +2083,7 @@
 
 		cci1: cci@ac4b000 {
 			compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
-			reg = <0 0x0ac4b000 0 0x1000>;
+			reg = <0x0 0x0ac4b000 0x0 0x1000>;
 			interrupts = <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>;
 			power-domains = <&camcc TITAN_TOP_GDSC>;
 
@@ -1960,7 +2125,7 @@
 
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sm6350-camcc";
-			reg = <0 0x0ad00000 0 0x16000>;
+			reg = <0x0 0x0ad00000 0x0 0x16000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -1969,13 +2134,20 @@
 
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sm6350-mdss";
-			reg = <0 0x0ae00000 0 0x1000>;
+			reg = <0x0 0x0ae00000 0x0 0x1000>;
 			reg-names = "mdss";
 
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
 			clocks = <&gcc GCC_DISP_AHB_CLK>,
 				 <&gcc GCC_DISP_AXI_CLK>,
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
@@ -1994,8 +2166,8 @@
 
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm6350-dpu";
-				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				reg = <0x0 0x0ae01000 0x0 0x8f000>,
+				      <0x0 0x0aeb0000 0x0 0x2008>;
 				reg-names = "mdp", "vbif";
 
 				interrupt-parent = <&mdss>;
@@ -2031,6 +2203,14 @@
 							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp_in>;
+						};
+					};
 				};
 
 				mdp_opp_table: opp-table {
@@ -2068,9 +2248,89 @@
 				};
 			};
 
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sm6350-dp", "qcom,sc7180-dp";
+				reg = <0x0 0xae90000 0x0 0x200>,
+				      <0x0 0xae90200 0x0 0x200>,
+				      <0x0 0xae90400 0x0 0x600>,
+				      <0x0 0xae91000 0x0 0x400>,
+				      <0x0 0xae91400 0x0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SM6350_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp_out: endpoint {
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
-				reg = <0 0x0ae94000 0 0x400>;
+				reg = <0x0 0x0ae94000 0x0 0x400>;
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
@@ -2091,7 +2351,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 				power-domains = <&rpmhpd SM6350_MX>;
@@ -2146,9 +2407,9 @@
 
 			mdss_dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-10nm";
-				reg = <0 0x0ae94400 0 0x200>,
-				      <0 0x0ae94600 0 0x280>,
-				      <0 0x0ae94a00 0 0x1e0>;
+				reg = <0x0 0x0ae94400 0x0 0x200>,
+				      <0x0 0x0ae94600 0x0 0x280>,
+				      <0x0 0x0ae94a00 0x0 0x1e0>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
@@ -2166,11 +2427,11 @@
 
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sm6350-dispcc";
-			reg = <0 0x0af00000 0 0x20000>;
+			reg = <0x0 0x0af00000 0x0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -2186,7 +2447,7 @@
 
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm6350-pdc", "qcom,pdc";
-			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;
+			reg = <0x0 0x0b220000 0x0 0x30000>, <0x0 0x17c000f0 0x0 0x64>;
 			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
 					  <125 63 1>, <126 655 12>, <138 139 15>;
 			#interrupt-cells = <2>;
@@ -2196,8 +2457,8 @@
 
 		tsens0: thermal-sensor@c263000 {
 			compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
-			reg = <0 0x0c263000 0 0x1ff>, /* TM */
-			      <0 0x0c222000 0 0x8>; /* SROT */
+			reg = <0x0 0x0c263000 0x0 0x1ff>, /* TM */
+			      <0x0 0x0c222000 0x0 0x8>; /* SROT */
 			#qcom,sensors = <16>;
 			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
@@ -2207,8 +2468,8 @@
 
 		tsens1: thermal-sensor@c265000 {
 			compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
-			reg = <0 0x0c265000 0 0x1ff>, /* TM */
-			      <0 0x0c223000 0 0x8>; /* SROT */
+			reg = <0x0 0x0c265000 0x0 0x1ff>, /* TM */
+			      <0x0 0x0c223000 0x0 0x8>; /* SROT */
 			#qcom,sensors = <16>;
 			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
@@ -2218,7 +2479,7 @@
 
 		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp";
-			reg = <0 0x0c300000 0 0x1000>;
+			reg = <0x0 0x0c300000 0x0 0x1000>;
 			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
 						     IRQ_TYPE_EDGE_RISING>;
 			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
@@ -2226,13 +2487,18 @@
 			#clock-cells = <0>;
 		};
 
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
-			reg = <0 0x0c440000 0 0x1100>,
-			      <0 0x0c600000 0 0x2000000>,
-			      <0 0x0e600000 0 0x100000>,
-			      <0 0x0e700000 0 0xa0000>,
-			      <0 0x0c40a000 0 0x26000>;
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
@@ -2246,7 +2512,7 @@
 
 		tlmm: pinctrl@f100000 {
 			compatible = "qcom,sm6350-tlmm";
-			reg = <0 0x0f100000 0 0x300000>;
+			reg = <0x0 0x0f100000 0x0 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
@@ -2425,7 +2691,7 @@
 
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sm6350-smmu-500", "arm,mmu-500";
-			reg = <0 0x15000000 0 0x100000>;
+			reg = <0x0 0x15000000 0x0 0x100000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
@@ -2509,6 +2775,7 @@
 				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 		};
 
 		intc: interrupt-controller@17a00000 {
@@ -2522,9 +2789,9 @@
 
 		watchdog@17c10000 {
 			compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
-			reg = <0 0x17c10000 0 0x1000>;
+			reg = <0x0 0x17c10000 0x0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
@@ -2600,7 +2867,7 @@
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
 					  <WAKE_TCS 3>, <CONTROL_TCS 1>;
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm6350-rpmh-clk";
@@ -2676,7 +2943,7 @@
 
 		cpufreq_hw: cpufreq@18323000 {
 			compatible = "qcom,sm6350-cpufreq-hw", "qcom,cpufreq-hw";
-			reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>;
+			reg = <0x0 0x18323000 0x0 0x1000>, <0x0 0x18325800 0x0 0x1000>;
 			reg-names = "freq-domain0", "freq-domain1";
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
 			clock-names = "xo", "alternate";
@@ -2687,7 +2954,7 @@
 
 		wifi: wifi@18800000 {
 			compatible = "qcom,wcn3990-wifi";
-			reg = <0 0x18800000 0 0x800000>;
+			reg = <0x0 0x18800000 0x0 0x800000>;
 			reg-names = "membase";
 			memory-region = <&wlan_fw_mem>;
 			interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
@@ -2708,6 +2975,495 @@
 		};
 	};
 
+	sound: sound {
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		audio-thermal {
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				audio-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert0>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert0>;
+					cooling-device = <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-left-thermal {
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_left_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-left-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_left_alert0>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-right-thermal {
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu6_right_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-right-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_right_alert0>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-left-thermal {
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu7_left_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-left-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_left_alert0>;
+					cooling-device = <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-right-thermal {
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu7_right_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-right-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_right_alert0>;
+					cooling-device = <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpuss0-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpuss1-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cwlan-thermal {
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cwlan-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				ddr-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		modem-core0-thermal {
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				modem-core0-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem-core1-thermal {
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				modem-core1-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem-scl-thermal {
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				modem-scl-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem-vec-thermal {
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				modem-vec-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		npu-thermal {
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				npu-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6-hvx-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				video-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		clock-frequency = <19200000>;
diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
index b2f1bb1d58e9..e04a3b8f81c5 100644
--- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
+++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -80,6 +80,15 @@
 		};
 	};
 
+	touch_avdd: touch-avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_avdd";
+		gpio = <&tlmm 59 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_avdd_default>;
+		enable-active-high;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -133,12 +142,13 @@
 		compatible = "samsung,s6sy761";
 		reg = <0x48>;
 		interrupt-parent = <&tlmm>;
-		interrupts = <22 0x2008>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
 
 		vdd-supply = <&pm6125_l13>;
+		avdd-supply = <&touch_avdd>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_default &ts_avdd_default>;
+		pinctrl-0 = <&ts_int_default>;
 	};
 };
 
@@ -187,6 +197,11 @@
 	status = "okay";
 };
 
+&remoteproc_mss {
+	firmware-name = "qcom/sm6375/Sony/murray/modem.mbn";
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -238,8 +253,8 @@
 		};
 
 		pm6125_l7: l7 {
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <1050000>;
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
 		};
 
 		pm6125_l8: l8 {
@@ -306,7 +321,7 @@
 
 		pm6125_l21: l21 {
 			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-max-microvolt = <3312000>;
 		};
 
 		pm6125_l22: l22 {
@@ -317,7 +332,7 @@
 
 		pm6125_l23: l23 {
 			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-max-microvolt = <3312000>;
 		};
 
 		pm6125_l24: l24 {
@@ -340,8 +355,8 @@
 		};
 
 		pmr735a_l2: l2 {
-			regulator-min-microvolt = <352000>;
-			regulator-max-microvolt = <796000>;
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <640000>;
 		};
 
 		pmr735a_l3: l3 {
@@ -412,7 +427,7 @@
 		pins = "gpio59";
 		function = "gpio";
 		drive-strength = <8>;
-		output-high;
+		output-low;
 	};
 };
 
@@ -425,6 +440,18 @@
 };
 
 &usb_1_hsphy {
+	vdda-pll-supply = <&pm6125_l7>;
+	vdda18-supply = <&pm6125_l10>;
+	vdda33-supply = <&pmr735a_l7>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pmr735a_l2>;
+	vdd-1.8-xo-supply = <&pm6125_l16>;
+	vdd-1.3-rfa-supply = <&pm6125_l2>;
+	vdd-3.3-ch0-supply = <&pm6125_l23>;
+	vdd-3.3-ch1-supply = <&pm6125_l21>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index e7ff55443da7..0faa3a40ff82 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -29,7 +29,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -38,25 +38,25 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -64,185 +64,185 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_100>;
+			next-level-cache = <&l2_100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_200>;
+			next-level-cache = <&l2_200>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x300>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_300>;
+			next-level-cache = <&l2_300>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x400>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_400>;
+			next-level-cache = <&l2_400>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x500>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_500>;
+			next-level-cache = <&l2_500>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x600>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_600>;
+			next-level-cache = <&l2_600>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo660";
 			reg = <0x0 0x700>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_700>;
+			next-level-cache = <&l2_700>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -250,7 +250,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-power-collapse";
 				arm,psci-suspend-param = <0x40000003>;
@@ -260,7 +260,7 @@
 				local-timer-stop;
 			};
 
-			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+			little_cpu_sleep_1: cpu-sleep-0-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -270,7 +270,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "gold-power-collapse";
 				arm,psci-suspend-param = <0x40000003>;
@@ -280,7 +280,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+			big_cpu_sleep_1: cpu-sleep-1-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -292,7 +292,7 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			cluster_sleep_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
 				entry-latency-us = <2752>;
@@ -311,6 +311,25 @@
 		};
 	};
 
+	mpm: interrupt-controller {
+		compatible = "qcom,mpm";
+		qcom,rpm-msg-ram = <&apss_mpm>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#power-domain-cells = <0>;
+		interrupt-parent = <&intc>;
+		qcom,mpm-pin-count = <96>;
+		qcom,mpm-pin-map = <5 296>,  /* Soundwire wake_irq */
+				   <12 422>, /* DWC3 ss_phy_irq */
+				   <86 183>, /* MPM wake, SPMI */
+				   <89 314>, /* TSENS0 0C */
+				   <90 315>, /* TSENS1 0C */
+				   <93 164>, /* DWC3 dm_hs_phy_irq */
+				   <94 165>; /* DWC3 dp_hs_phy_irq */
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -436,57 +455,58 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CLUSTER_PD: power-domain-cpu-cluster0 {
+		cluster_pd: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			power-domains = <&mpm>;
+			domain-idle-states = <&cluster_sleep_0>;
 		};
 	};
 
@@ -633,7 +653,7 @@
 			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
 
 			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-sm6375";
+				compatible = "qcom,rpm-sm6375", "qcom,glink-smd-rpm";
 				qcom,glink-channels = "rpm_requests";
 
 				rpmcc: clock-controller {
@@ -808,7 +828,7 @@
 			reg = <0 0x00500000 0 0x800000>;
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&tlmm 0 0 157>;
-			/* TODO: Hook up MPM as wakeup-parent when it's there */
+			wakeup-parent = <&mpm>;
 			interrupt-controller;
 			gpio-controller;
 			#interrupt-cells = <2>;
@@ -896,6 +916,36 @@
 				drive-strength = <6>;
 				bias-disable;
 			};
+
+			qup_uart1_default: qup-uart1-default-state {
+				cts-pins {
+					pins = "gpio61";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				rts-pins {
+					pins = "gpio62";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				tx-pins {
+					pins = "gpio63";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio64";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		gcc: clock-controller@1400000 {
@@ -930,7 +980,7 @@
 			      <0 0x01c0a000 0 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -962,8 +1012,15 @@
 		};
 
 		rpm_msg_ram: sram@45f0000 {
-			compatible = "qcom,rpm-msg-ram";
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
 			reg = <0 0x045f0000 0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
 		};
 
 		sram@4690000 {
@@ -1111,6 +1168,19 @@
 				status = "disabled";
 			};
 
+			uart1: serial@4a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				pinctrl-0 = <&qup_uart1_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
 			i2c2: i2c@4a88000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a88000 0x0 0x4000>;
@@ -1360,14 +1430,16 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <133333333>;
 
-			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+			interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 94 IRQ_TYPE_EDGE_BOTH>,
+					      <&mpm 93 IRQ_TYPE_EDGE_BOTH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -1444,9 +1516,9 @@
 			#power-domain-cells = <1>;
 		};
 
-		remoteproc_mss: remoteproc@6000000 {
+		remoteproc_mss: remoteproc@6080000 {
 			compatible = "qcom,sm6375-mpss-pas";
-			reg = <0 0x06000000 0 0x4040>;
+			reg = <0x0 0x06080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1487,9 +1559,9 @@
 
 		remoteproc_adsp: remoteproc@a400000 {
 			compatible = "qcom,sm6375-adsp-pas";
-			reg = <0 0x0a400000 0 0x100>;
+			reg = <0 0x0a400000 0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -1523,9 +1595,9 @@
 			};
 		};
 
-		remoteproc_cdsp: remoteproc@b000000 {
+		remoteproc_cdsp: remoteproc@b300000 {
 			compatible = "qcom,sm6375-cdsp-pas";
-			reg = <0x0 0x0b000000 0x0 0x100000>;
+			reg = <0x0 0x0b300000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1765,9 +1837,6 @@
 
 	thermal-zones {
 		mapss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -1792,9 +1861,6 @@
 		};
 
 		cpu0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
@@ -1819,9 +1885,6 @@
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
@@ -1846,9 +1909,6 @@
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
@@ -1873,9 +1933,6 @@
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
@@ -1900,9 +1957,6 @@
 		};
 
 		cpu4-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
@@ -1927,9 +1981,6 @@
 		};
 
 		cpu5-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
@@ -1954,9 +2005,6 @@
 		};
 
 		cluster0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
@@ -1981,9 +2029,6 @@
 		};
 
 		cluster1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -2008,9 +2053,6 @@
 		};
 
 		cpu6-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
@@ -2035,9 +2077,6 @@
 		};
 
 		cpu7-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
@@ -2062,9 +2101,6 @@
 		};
 
 		cpu-unk0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
@@ -2089,9 +2125,6 @@
 		};
 
 		cpu-unk1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
@@ -2116,9 +2149,6 @@
 		};
 
 		gpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
@@ -2143,9 +2173,6 @@
 		};
 
 		gpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 14>;
 
 			trips {
@@ -2170,9 +2197,6 @@
 		};
 
 		mapss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 0>;
 
 			trips {
@@ -2197,9 +2221,6 @@
 		};
 
 		cwlan-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
@@ -2224,9 +2245,6 @@
 		};
 
 		audio-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
@@ -2251,9 +2269,6 @@
 		};
 
 		ddr-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
@@ -2278,9 +2293,6 @@
 		};
 
 		q6hvx-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
@@ -2305,9 +2317,6 @@
 		};
 
 		camera-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
@@ -2332,9 +2341,6 @@
 		};
 
 		mdm-core0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 6>;
 
 			trips {
@@ -2359,9 +2365,6 @@
 		};
 
 		mdm-core1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 7>;
 
 			trips {
@@ -2386,9 +2389,6 @@
 		};
 
 		mdm-vec-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
@@ -2413,9 +2413,6 @@
 		};
 
 		msm-scl-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
@@ -2440,9 +2437,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 10>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
index e55cd83c19b8..b9cff60efe6f 100644
--- a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
@@ -152,6 +152,9 @@
 			regulator-min-microvolt = <824000>;
 			regulator-max-microvolt = <928000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l5a_2p7: ldo5 {
@@ -188,6 +191,9 @@
 			regulator-min-microvolt = <1696000>;
 			regulator-max-microvolt = <1952000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13a_1p8: ldo13 {
@@ -230,6 +236,9 @@
 			regulator-min-microvolt = <2696000>;
 			regulator-max-microvolt = <3304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 
@@ -258,6 +267,9 @@
 			regulator-min-microvolt = <1144000>;
 			regulator-max-microvolt = <1304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4c_1p8: ldo4 {
@@ -398,6 +410,22 @@
 	};
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l19a_3p0>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&vreg_l12a_1p8>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p23>;
+	status = "okay";
+};
+
 &usb_1 {
 	qcom,select-utmi-as-pipe-clk;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-curtana.dts b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-curtana.dts
new file mode 100644
index 000000000000..12f517a8492c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-curtana.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023, Joe Mason <buddyjojo06@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "sm7125-xiaomi-common.dtsi"
+
+/ {
+	model = "Xiaomi Redmi Note 9S";
+	compatible = "xiaomi,curtana", "qcom,sm7125";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0x20022 1>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm7125.dtsi b/arch/arm64/boot/dts/qcom/sm7125.dtsi
index 12dd72859a43..a53145a610a3 100644
--- a/arch/arm64/boot/dts/qcom/sm7125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm7125.dtsi
@@ -6,11 +6,11 @@
 #include "sc7180.dtsi"
 
 /* SM7125 uses Kryo 465 instead of Kryo 468 */
-&CPU0 { compatible = "qcom,kryo465"; };
-&CPU1 { compatible = "qcom,kryo465"; };
-&CPU2 { compatible = "qcom,kryo465"; };
-&CPU3 { compatible = "qcom,kryo465"; };
-&CPU4 { compatible = "qcom,kryo465"; };
-&CPU5 { compatible = "qcom,kryo465"; };
-&CPU6 { compatible = "qcom,kryo465"; };
-&CPU7 { compatible = "qcom,kryo465"; };
+&cpu0 { compatible = "qcom,kryo465"; };
+&cpu1 { compatible = "qcom,kryo465"; };
+&cpu2 { compatible = "qcom,kryo465"; };
+&cpu3 { compatible = "qcom,kryo465"; };
+&cpu4 { compatible = "qcom,kryo465"; };
+&cpu5 { compatible = "qcom,kryo465"; };
+&cpu6 { compatible = "qcom,kryo465"; };
+&cpu7 { compatible = "qcom,kryo465"; };
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index ade619805519..4afbab570ca1 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -19,6 +19,8 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm7225.dtsi"
 #include "pm6150l.dtsi"
 #include "pm6350.dtsi"
@@ -31,7 +33,7 @@
 	chassis-type = "handset";
 
 	/* required for bootloader to select correct board */
-	qcom,msm-id = <434 0x10000>, <459 0x10000>;
+	qcom,msm-id = <459 0x10000>;
 	qcom,board-id = <8 32>;
 
 	aliases {
@@ -68,6 +70,14 @@
 		};
 	};
 
+	/* Dummy regulator until PM6150L has LCDB VSP/VSN support */
+	lcdb_dummy: regulator-lcdb-dummy {
+		compatible = "regulator-fixed";
+		regulator-name = "lcdb_dummy";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+	};
+
 	reserved-memory {
 		/*
 		 * The rmtfs memory region in downstream is 'dynamically allocated'
@@ -84,10 +94,22 @@
 		};
 	};
 
+	msm_therm_sensor: thermal-sensor-msm {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>;
+		io-channel-names = "sensor-channel";
+	};
+
+	rear_cam_sensor: thermal-sensor-rear-cam {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&pm6150l_adc ADC5_GPIO2_100K_PU>;
+		io-channel-names = "sensor-channel";
+	};
+
 	thermal-zones {
 		chg-skin-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm7250b_adc_tm 0>;
 
 			trips {
@@ -100,8 +122,6 @@
 		};
 
 		conn-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm7250b_adc_tm 1>;
 
 			trips {
@@ -112,11 +132,124 @@
 				};
 			};
 		};
+
+		pa0-thermal {
+			thermal-sensors = <&pm6150l_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pa1-thermal {
+			thermal-sensors = <&pm6150l_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pm8008-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&pm8008>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		quiet-thermal {
+			thermal-sensors = <&pm6150l_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-cam-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&rear_cam_sensor>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rfc-flash-thermal {
+			thermal-sensors = <&pm6150l_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		sdm-skin-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&msm_therm_sensor>;
+
+			trips {
+				trip0 {
+					temperature = <45000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <55000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		xo-thermal {
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
 	};
 };
 
 &adsp {
-	firmware-name = "qcom/sm7225/fairphone4/adsp.mdt";
+	firmware-name = "qcom/sm7225/fairphone4/adsp.mbn";
 	status = "okay";
 };
 
@@ -126,124 +259,145 @@
 		qcom,pmic-id = "a";
 
 		vreg_s1a: smps1 {
+			regulator-name = "vreg_s1a";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1200000>;
 		};
 
 		vreg_s2a: smps2 {
+			regulator-name = "vreg_s2a";
 			regulator-min-microvolt = <1503000>;
 			regulator-max-microvolt = <2048000>;
 		};
 
 		vreg_l2a: ldo2 {
+			regulator-name = "vreg_l2a";
 			regulator-min-microvolt = <1503000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
 			regulator-min-microvolt = <352000>;
 			regulator-max-microvolt = <801000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
 			regulator-min-microvolt = <1503000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
 			regulator-min-microvolt = <1710000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
 			regulator-min-microvolt = <1650000>;
 			regulator-max-microvolt = <3401000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11a: ldo11 {
+			regulator-name = "vreg_l11a";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l12a: ldo12 {
+			regulator-name = "vreg_l12a";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13a: ldo13 {
+			regulator-name = "vreg_l13a";
 			regulator-min-microvolt = <570000>;
 			regulator-max-microvolt = <650000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l14a: ldo14 {
+			regulator-name = "vreg_l14a";
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l15a: ldo15 {
+			regulator-name = "vreg_l15a";
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1305000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l16a: ldo16 {
+			regulator-name = "vreg_l16a";
 			regulator-min-microvolt = <830000>;
 			regulator-max-microvolt = <921000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l18a: ldo18 {
+			regulator-name = "vreg_l18a";
 			regulator-min-microvolt = <788000>;
 			regulator-max-microvolt = <1049000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l19a: ldo19 {
+			regulator-name = "vreg_l19a";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1305000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l20a: ldo20 {
+			regulator-name = "vreg_l20a";
 			regulator-min-microvolt = <530000>;
 			regulator-max-microvolt = <801000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l21a: ldo21 {
+			regulator-name = "vreg_l21a";
 			regulator-min-microvolt = <751000>;
 			regulator-max-microvolt = <825000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l22a: ldo22 {
+			regulator-name = "vreg_l22a";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1305000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -255,41 +409,48 @@
 		qcom,pmic-id = "e";
 
 		vreg_s8e: smps8 {
+			regulator-name = "vreg_s8e";
 			regulator-min-microvolt = <313000>;
 			regulator-max-microvolt = <1395000>;
 		};
 
 		vreg_l1e: ldo1 {
+			regulator-name = "vreg_l1e";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l2e: ldo2 {
+			regulator-name = "vreg_l2e";
 			regulator-min-microvolt = <1170000>;
 			regulator-max-microvolt = <1305000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l3e: ldo3 {
+			regulator-name = "vreg_l3e";
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1299000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4e: ldo4 {
+			regulator-name = "vreg_l4e";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l5e: ldo5 {
+			regulator-name = "vreg_l5e";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6e: ldo6 {
+			regulator-name = "vreg_l6e";
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <2950000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -299,18 +460,21 @@
 		};
 
 		vreg_l7e: ldo7 {
+			regulator-name = "vreg_l7e";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l8e: ldo8 {
+			regulator-name = "vreg_l8e";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9e: ldo9 {
+			regulator-name = "vreg_l9e";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -320,18 +484,21 @@
 		};
 
 		vreg_l10e: ldo10 {
+			regulator-name = "vreg_l10e";
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3401000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11e: ldo11 {
+			regulator-name = "vreg_l11e";
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3401000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_bob: bob {
+			regulator-name = "vreg_bob";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <5492000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
@@ -361,7 +528,7 @@
 };
 
 &cdsp {
-	firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
+	firmware-name = "qcom/sm7225/fairphone4/cdsp.mbn";
 	status = "okay";
 };
 
@@ -373,6 +540,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sm7225/fairphone4/a615_zap.mbn";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	status = "okay";
@@ -391,7 +566,79 @@
 };
 
 &i2c10 {
-	/* PM8008 PMIC @ 8 and 9 */
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pm8008: pmic@8 {
+		compatible = "qcom,pm8008";
+		reg = <0x8>;
+
+		interrupts-extended = <&tlmm 59 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+
+		vdd-l1-l2-supply = <&vreg_s8e>;
+		vdd-l3-l4-supply = <&vreg_bob>;
+		vdd-l5-supply = <&vreg_bob>;
+		vdd-l6-supply = <&vreg_s2a>;
+		vdd-l7-supply = <&vreg_bob>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pm8008_default>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pm8008 0 0 2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		#thermal-sensor-cells = <0>;
+
+		regulators {
+			vreg_l1p: ldo1 {
+				regulator-name = "vreg_l1p";
+				regulator-min-microvolt = <528000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vreg_l2p: ldo2 {
+				regulator-name = "vreg_l2p";
+				regulator-min-microvolt = <528000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vreg_l3p: ldo3 {
+				regulator-name = "vreg_l3p";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vreg_l4p: ldo4 {
+				regulator-name = "vreg_l4p";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2904000>;
+			};
+
+			vreg_l5p: ldo5 {
+				regulator-name = "vreg_l5p";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2900000>;
+			};
+
+			vreg_l6p: ldo6 {
+				regulator-name = "vreg_l6p";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vreg_l7p: ldo7 {
+				regulator-name = "vreg_l7p";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3140000>;
+			};
+		};
+	};
+
 	/* PX8618 @ 26 */
 	/* SMB1395 PMIC @ 34 */
 	/* awinic,aw8695 @ 5a */
@@ -400,15 +647,137 @@
 &ipa {
 	qcom,gsi-loader = "self";
 	memory-region = <&pil_ipa_fw_mem>;
-	firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mdt";
+	firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l22a>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "djn,9a-3r063-1102b";
+		reg = <0>;
+
+		backlight = <&pm6150l_wled>;
+		reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+		vdd1-supply = <&vreg_l1e>;
+		vsn-supply = <&lcdb_dummy>;
+		vsp-supply = <&lcdb_dummy>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l18a>;
 	status = "okay";
 };
 
 &mpss {
-	firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
+	firmware-name = "qcom/sm7225/fairphone4/modem.mbn";
 	status = "okay";
 };
 
+&pm6150l_adc {
+	pinctrl-0 = <&pm6150l_adc_default>;
+	pinctrl-names = "default";
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		label = "pa_therm1";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		label = "msm_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		label = "pa_therm0";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@53 {
+		reg = <ADC5_GPIO2_100K_PU>;
+		label = "rear_cam_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@54 {
+		reg = <ADC5_GPIO3_100K_PU>;
+		label = "rear_cam_flash_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@55 {
+		reg = <ADC5_GPIO4_100K_PU>;
+		label = "quiet_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+};
+
+&pm6150l_adc_tm {
+	status = "okay";
+
+	pa-therm1@0 {
+		reg = <0>;
+		io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+
+	pa-therm0@1 {
+		reg = <1>;
+		io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+
+	rear-cam-flash-therm@2 {
+		reg = <2>;
+		io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+
+	quiet-therm@3 {
+		reg = <3>;
+		io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+};
+
 &pm6150l_flash {
 	status = "okay";
 
@@ -431,6 +800,14 @@
 	};
 };
 
+&pm6150l_gpios {
+	pm6150l_adc_default: adc-default-state {
+		pins = "gpio6", "gpio7", "gpio10";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+};
+
 &pm6150l_wled {
 	qcom,switching-freq = <800>;
 	qcom,current-limit-microamp = <20000>;
@@ -490,6 +867,64 @@
 	};
 };
 
+&pm7250b_typec {
+	vdd-pdphy-supply = <&vreg_l3a>;
+
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		/*
+		 * Disable USB Power Delivery for now, seems to need extra work
+		 * to support role switching while also letting the battery
+		 * charge still - without charger driver
+		 */
+		typec-power-opmode = "default";
+		pd-disable;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pm7250b_hs_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pm7250b_ss_in: endpoint {
+					remote-endpoint = <&usb_1_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&pm7250b_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <1500000>;
+	status = "okay";
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+};
+
 &pmk8350_rtc {
 	status = "okay";
 };
@@ -504,6 +939,12 @@
 	};
 };
 
+&q6asmdai {
+	dai@0 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+	};
+};
+
 &qup_uart1_cts {
 	/*
 	 * Configure a bias-bus-hold on CTS to lower power
@@ -572,6 +1013,35 @@
 	status = "okay";
 };
 
+&sound {
+	compatible = "fairphone,fp4-sndcard";
+	model = "Fairphone 4";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	usb-dai-link {
+		link-name = "USB Playback";
+
+		codec {
+			sound-dai = <&q6usbdai USB_RX>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai USB_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <13 4>, <56 2>;
 
@@ -620,6 +1090,22 @@
 		 */
 		bias-pull-up;
 	};
+
+	pm8008_default: pm8008-default-state {
+		int-pins {
+			pins = "gpio59";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		reset-n-pins {
+			pins = "gpio58";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
 };
 
 &uart1 {
@@ -673,7 +1159,11 @@
 
 &usb_1_dwc3 {
 	maximum-speed = "super-speed";
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+};
+
+&usb_1_dwc3_hs_out {
+	remote-endpoint = <&pm7250b_hs_in>;
 };
 
 &usb_1_hsphy {
@@ -691,6 +1181,10 @@
 	status = "okay";
 };
 
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pm7250b_ss_in>;
+};
+
 &wifi {
 	vdd-0.8-cx-mx-supply = <&vreg_l4a>;
 	vdd-1.8-xo-supply = <&vreg_l7a>;
diff --git a/arch/arm64/boot/dts/qcom/sm7225.dtsi b/arch/arm64/boot/dts/qcom/sm7225.dtsi
index b7b4044e9bb0..a8ffdfb254fe 100644
--- a/arch/arm64/boot/dts/qcom/sm7225.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm7225.dtsi
@@ -6,14 +6,14 @@
 #include "sm6350.dtsi"
 
 /* SM7225 uses Kryo 570 instead of Kryo 560 */
-&CPU0 { compatible = "qcom,kryo570"; };
-&CPU1 { compatible = "qcom,kryo570"; };
-&CPU2 { compatible = "qcom,kryo570"; };
-&CPU3 { compatible = "qcom,kryo570"; };
-&CPU4 { compatible = "qcom,kryo570"; };
-&CPU5 { compatible = "qcom,kryo570"; };
-&CPU6 { compatible = "qcom,kryo570"; };
-&CPU7 { compatible = "qcom,kryo570"; };
+&cpu0 { compatible = "qcom,kryo570"; };
+&cpu1 { compatible = "qcom,kryo570"; };
+&cpu2 { compatible = "qcom,kryo570"; };
+&cpu3 { compatible = "qcom,kryo570"; };
+&cpu4 { compatible = "qcom,kryo570"; };
+&cpu5 { compatible = "qcom,kryo570"; };
+&cpu6 { compatible = "qcom,kryo570"; };
+&cpu7 { compatible = "qcom,kryo570"; };
 
 &cpu0_opp_table {
 	opp-1804800000 {
diff --git a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
new file mode 100644
index 000000000000..f16b47b6a74c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
@@ -0,0 +1,1456 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Eugene Lepshy <fekz115@gmail.com>
+ * Copyright (c) 2024, Danila Tikhonov <danila@jiaxyga.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+#include "sm7325.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350b.dtsi" /* PM7325B */
+#include "pm8350c.dtsi" /* PM7350C */
+#include "pmk8350.dtsi" /* PMK7325 */
+
+/delete-node/ &rmtfs_mem;
+
+/ {
+	model = "Nothing Phone (1)";
+	compatible = "nothing,spacewar", "qcom,sm7325";
+	chassis-type = "handset";
+
+	aliases {
+		bluetooth0 = &bluetooth;
+		serial0 = &uart5;
+		serial1 = &uart7;
+		wifi0 = &wifi;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		framebuffer0: framebuffer@e1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xe1000000 0x0 (1080 * 2400 * 4)>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+				 <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+				 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+				 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+				 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+			power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&kypd_volp_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume up";
+			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm7325-pmic-glink",
+			     "qcom,qcm6490-pmic-glink",
+			     "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops_mem: ramoops@83a00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x83a00000 0x0 0x400000>;
+			pmsg-size = <0x200000>;
+			mem-type = <2>;
+			console-size = <0x200000>;
+		};
+
+		cdsp_mem: cdsp@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		removed_mem: removed@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x5100000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@e1000000 {
+			reg = <0x0 0xe1000000 0x0 (1080 * 2400 * 4)>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@f8500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf8500000 0x0 0x600000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>,
+				    <QCOM_SCM_VMID_NAV>;
+		};
+	};
+
+	thermal-zones {
+		camera-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		chg-skin-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 6>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 5>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-cam-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 4>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		sdm-skin-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_cam_vio_1p8: regulator-cam-vio {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_cam_vio_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* Always-on prevents CCI bus timeouts */
+		regulator-always-on;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camf_vana_2p8: regulator-camf-vana {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camf_vana_2p8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camf_vdig_1p1: regulator-camf-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camf_vdig_1p1";
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+
+		gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s8b_1p256>;
+	};
+
+	vreg_camu_vaf_1p8: regulator-camu-vaf {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camu_vaf_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 71 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camu_vana_2p8: regulator-camu-vana {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camu_vana_2p8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camu_vdig_1p1: regulator-camu-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camu_vdig_1p1";
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+
+		gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s8b_1p256>;
+	};
+
+	vreg_camw_vaf_1p8: regulator-camw-vaf {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camw_vaf_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camw_vana_2p8: regulator-camw-vana {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camw_vana_2p8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camw_vdig_1p1: regulator-camw-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camw_vdig_1p1";
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+
+		gpio = <&tlmm 108 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s8b_1p256>;
+	};
+
+	// S2B is really ebi.lvl but it's there for supply map completeness sake.
+	vreg_s2b_0p7: smpa3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s2b_0p7";
+
+		regulator-min-microvolt = <65535>;
+		regulator-max-microvolt = <65535>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p952>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-supply = <&vreg_s2b_0p7>;
+		vdd-l5-supply = <&vreg_s2b_0p7>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p256>;
+		vdd-l8-supply = <&vreg_s7b_0p952>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p856>;
+		vdd-l13-supply = <&vreg_s7b_0p952>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p256>;
+
+		/*
+		 * S2, L4-L5 are ARCs:
+		 * S2 - ebi.lvl,
+		 * L4 - lmx.lvl,
+		 * l5 - lcx.lvl.
+		 *
+		 * L10 are unused.
+		 */
+
+		vdd19_pmu_rfa_i:
+		vreg_s1b_1p856: smps1 {
+			regulator-name = "vreg_s1b_1p856";
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vdd_pmu_aon_i:
+		vdd09_pmu_rfa_i:
+		vdd095_mx_pmu:
+		vdd095_pmu_1:
+		vdd095_pmu_2:
+		vreg_s7b_0p952: smps7 {
+			regulator-name = "vreg_s7b_0p952";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vdd13_pmu_rfa_i:
+		vreg_s8b_1p256: smps8 {
+			regulator-name = "vreg_s8b_1p256";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-name = "vreg_l1b_0p912";
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_usbhs_3p1:
+		vreg_l2b_3p072: ldo2 {
+			regulator-name = "vreg_l2b_3p072";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_io_ebi0_1:
+		vdd_io_ebi0_2:
+		vdd_io_ebi0_3:
+		vdd_io_ebi0_4:
+		vdd_io_ebi1_1:
+		vdd_io_ebi1_2:
+		vdd_io_ebi1_3:
+		vdd_io_ebi1_4:
+		vreg_l3b_0p6: ldo3 {
+			regulator-name = "vreg_l3b_0p6";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_csi_01_1p2:
+		vdd_a_csi_23_1p2:
+		vdd_a_csi_4_1p2:
+		vdd_a_dsi_0_1p2:
+		vdd_a_qlink_0_1p2_ck:
+		vdd_a_qlink_1_1p2:
+		vdd_a_ufs_0_1p2:
+		vdd_vref_1p2_1:
+		vdd_vref_1p2_2:
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p96: ldo7 {
+			regulator-name = "vreg_l7b_2p96";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-name = "vreg_l8b_0p904";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_px10:
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddah_0:
+		vddah_1:
+		vddah_fbrx:
+		vddah_tx0:
+		vddah_tx0_1:
+		vddah_tx1:
+		vddah_tx1_1:
+		vreg_l11b_1p776: ldo11 {
+			regulator-name = "vreg_l11b_1p776";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddal_dig0:
+		vddal_dig_1:
+		vddal_dig_2:
+		vddal_dig_xo:
+		vddal_gps_l1:
+		vddal_gps_l5:
+		vddal_icon:
+		vddal_rx:
+		vddal_rx0:
+		vddal_rx1:
+		vddal_rx2:
+		vddal_tx0:
+		vddal_tx0_1:
+		vddal_tx1:
+		vddal_tx1_2:
+		vreg_l12b_0p8: ldo12 {
+			regulator-name = "vreg_l12b_0p8";
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_cx1:
+		vdd_cx2:
+		vreg_l13b_0p8: ldo13 {
+			regulator-name = "vreg_l13b_0p8";
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_1p2:
+		vdd_lna:
+		vddam_fbrx:
+		vddam_rx_0:
+		vddam_rx_1:
+		vddam_rx0:
+		vddam_rx1:
+		vddam_rx2:
+		vddam_rxe_a:
+		vddam_rxe_b:
+		vddam_rxe_c:
+		vddam_rxe_d:
+		vddam_rxe_e:
+		vddam_tx0:
+		vddam_tx0_1:
+		vddam_tx1:
+		vddam_tx1_1:
+		vddam_xo:
+		vreg_l14b_1p2: ldo14 {
+			regulator-name = "vreg_l14b_1p2";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_mx:
+		vddmx_tx:
+		vdd_phy:
+		vreg_l15b_0p88: ldo15 {
+			regulator-name = "vreg_l15b_0p88";
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p2: ldo16 {
+			regulator-name = "vreg_l16b_1p2";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_buck:
+		vreg_l17b_1p8: ldo17 {
+			regulator-name = "vreg_l17b_1p8";
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_px_wcd9385:
+		vdd_txrx:
+		vdd_px0:
+		vdd_px3:
+		vdd_px7:
+		vreg_l18b_1p8: ldo18 {
+			regulator-name = "vreg_l18b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_1p8:
+		vdd_px_sdr735:
+		vdd_pxm:
+		vddio_px_1:
+		vddio_px_2:
+		vddio_px_3:
+		vdd18_io:
+		vddpx_ts:
+		vddpx_wl4otp:
+		vreg_l19b_1p8: ldo19 {
+			regulator-name = "vreg_l19b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_s1b_1p856>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p856>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s7b_0p952>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		/*
+		 * S2, S5, S7, S10 are ARCs:
+		 * S2 - cx.lvl,
+		 * S5 - mss.lvl,
+		 * S7 - gfx.lvl,
+		 * S10 - mx.lvl.
+		 */
+
+		vdd22_wlbtpa_ch0:
+		vdd22_wlbtpa_ch1:
+		vdd22_wlbtppa_ch0:
+		vdd22_wlbtppa_ch1:
+		vdd22_wlpa5g_ch0:
+		vdd22_wlpa5g_ch1:
+		vdd22_wlppa5g_ch0:
+		vdd22_wlppa5g_ch1:
+		vreg_s1c_2p2: smps1 {
+			regulator-name = "vreg_s1c_2p2";
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vdd_px1:
+		vreg_s9c_0p676: smps9 {
+			regulator-name = "vreg_s9c_0p676";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vdd_a_apc_cs_1p8:
+		vdd_a_cxo_1p8:
+		vdd_a_gfx_cs_1p8:
+		vdd_a_qrefs_1p8:
+		vdd_a_turing_q6_cs_1p8:
+		vdd_a_usbhs_1p8:
+		vdd_qfprom:
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-name = "vreg_l2c_1p8";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_ts:
+		vreg_l3c_3p0: ldo3 {
+			regulator-name = "vreg_l3c_3p0";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_px5:
+		vreg_l4c_1p8_3p0: ldo4 {
+			regulator-name = "vreg_l4c_1p8_3p0";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_px6:
+		vreg_l5c_1p8_3p0: ldo5 {
+			regulator-name = "vreg_l5c_1p8_3p0";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_px2:
+		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_sensor_3p3:
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_sensor_1p8:
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_csi_01_0p9:
+		vdd_a_csi_23_0p9:
+		vdd_a_csi_4_0p9:
+		vdd_a_dsi_0_0p9:
+		vdd_a_dsi_0_pll_0p9:
+		vdd_a_gnss_0p9:
+		vdd_a_qlink_0_0p9:
+		vdd_a_qlink_0_0p9_ck:
+		vdd_a_qlink_1_0p9:
+		vdd_a_qlink_1_0p9_ck:
+		vdd_a_qrefs_0p875_1:
+		vdd_a_qrefs_0p875_2:
+		vdd_a_qrefs_0p875_3:
+		vdd_a_qrefs_0p875_4:
+		vdd_a_qrefs_0p875_5:
+		vdd_a_qrefs_0p875_6:
+		vdd_a_qrefs_0p875_7:
+		vdd_a_qrefs_0p875_8:
+		vdd_a_qrefs_0p875_9:
+		vdd_a_ufs_0_core:
+		vdd_a_usbhs_core:
+		vdd_vref_0p9:
+		vreg_l10c_0p88: ldo10 {
+			regulator-name = "vreg_l10c_0p88";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_fm:
+		vdd_wlan_fem:
+		vreg_l11c_2p8: ldo11 {
+			regulator-name = "vreg_l11c_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_io_oled:
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_oled:
+		vreg_l13c_3p0: ldo13 {
+			regulator-name = "vreg_l13c_3p0";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_flash:
+		vdd_mic_bias:
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&cci0 {
+	/*
+	 * cci0_i2c1 bus is unused and GPIO 71&72 are repurposed.
+	 * So set only cci0_i2c0 pinctrl here.
+	 */
+	pinctrl-0 = <&cci0_default>;
+	pinctrl-1 = <&cci0_sleep>;
+
+	status = "okay";
+};
+
+&cci0_i2c0 {
+	/* D-PHY sony,imx471 (Front) @ 0x1a */
+
+	camf_p24c64f: eeprom@52 {
+		compatible = "puya,p24c64f",
+			     "atmel,24c64";
+		reg = <0x52>;
+		vcc-supply = <&vreg_cam_vio_1p8>;
+		read-only;
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	/* actuator (For Ultra Wide sensor) @ 0xc */
+	/* D-PHY samsung,s5kjn1 (Ultra Wide) @ 0x2d */
+
+	camu_gt24p128e: eeprom@51 {
+		compatible = "giantec,gt24p128e",
+			     "atmel,24c128";
+		reg = <0x51>;
+		vcc-supply = <&vreg_cam_vio_1p8>;
+		read-only;
+	};
+};
+
+&cci1_i2c1 {
+	/* actuator (For Wide sensor) @ 0xc */
+	/* C-PHY sony,imx766 (Wide) @ 0x10 */
+
+	camw_gt24p128e: eeprom@50 {
+		compatible = "giantec,gt24p128e",
+			     "atmel,24c128";
+		reg = <0x50>;
+		vcc-supply = <&vreg_cam_vio_1p8>;
+		read-only;
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sm7325/nothing/spacewar/a660_zap.mbn";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* awinic,aw21018 (Glyph LED) @ 20 */
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		vcc-supply = <&vreg_bob>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* nxp,tfa9873 (EAR speaker codec) @ 34 */
+	/* nxp,tfa9873 (Main speaker codec) @ 35 */
+};
+
+&i2c9 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	nfc@28 {
+		compatible = "nxp,pn553",
+			     "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <41 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&nfc_en>,
+			    <&nfc_clk_req>,
+			    <&nfc_dwl_req>,
+			    <&nfc_int_req>;
+		pinctrl-names = "default";
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm7325/nothing/spacewar/ipa_fws.mbn";
+
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi {
+	vdda-supply = <&vdd_a_dsi_0_1p2>;
+	status = "okay";
+
+	panel: panel@0 {
+		compatible = "nothing,rm692e5-spacewar",
+			     "visionox,rm692e5";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&vdd_oled>;
+		vddio-supply = <&vdd_io_oled>;
+
+		pinctrl-0 = <&lcd_reset_n>,
+			    <&mdp_vsync_p>;
+		pinctrl-names = "default";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi_phy {
+	vdds-supply = <&vdd_a_dsi_0_0p9>;
+	status = "okay";
+};
+
+&pm7325_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "PA_THERM3",
+			  "PA_THERM4",
+			  "NC",
+			  "NC",
+			  "KYPD_VOLP_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC"; /* GPIO_10 */
+
+	kypd_volp_n: kypd-volp-n-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		power-source = <1>;
+	};
+};
+
+&pm8350c_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	/* PMK8350 */
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	/* PM7325 */
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	cam-flash-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	sdm-skin-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wide-rfc-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	/* PM8350B */
+	usb-conn-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	chg-skin-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	/* PMK8350 */
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_xo_therm";
+	};
+
+	/* PM7325 */
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_quiet_therm";
+	};
+
+	channel@145 {
+		reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_cam_flash_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_sdm_skin_therm";
+	};
+
+	channel@147 {
+		reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_wide_rfc_therm";
+	};
+
+	channel@14a {
+		reg = <PM7325_ADC7_GPIO1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_pa3_therm";
+	};
+
+	channel@14b {
+		reg = <PM7325_ADC7_GPIO2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_pa4_therm";
+	};
+
+	/* PM8350B */
+	channel@344 {
+		reg = <PM8350B_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_batt_therm";
+	};
+
+	channel@347 {
+		reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_usb_conn_therm";
+	};
+
+	channel@34b {
+		reg = <PM8350B_ADC7_GPIO2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_chg_skin_therm";
+	};
+
+	channel@34c {
+		reg = <PM8350B_ADC7_GPIO3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm8350b_usb_therm2";
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+	};
+};
+
+&qfprom {
+	vcc-supply = <&vdd_qfprom>;
+};
+
+&qup_uart5_rx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart5_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm7325/nothing/spacewar/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm7325/nothing/spacewar/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm7325/nothing/spacewar/modem.mbn";
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "qcom/sm7325/nothing/spacewar/wpss.mbn";
+	status = "okay";
+};
+
+&spi13 {
+	status = "okay";
+
+	/* focaltech,ft3680 (Touchscreen) @ 0 */
+};
+
+&tlmm {
+	/* 56-59: Fingerprint reader (SPI) */
+	gpio-reserved-ranges = <56 4>;
+
+	bt_uart_sleep_cts: bt-uart-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		bias-bus-hold;
+	};
+
+	bt_uart_sleep_rts: bt-uart-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	bt_uart_sleep_txd: bt-uart-sleep-txd-state {
+		pins = "gpio30";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	bt_uart_sleep_rxd: bt-uart-sleep-rxd-state {
+		pins = "gpio31";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	nfc_en: nfc-en-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	nfc_clk_req: nfc-clk-req-state {
+		pins = "gpio39";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	nfc_dwl_req: nfc-dwl-req-state {
+		pins = "gpio40";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	nfc_int_req: nfc-int-req-state {
+		pins = "gpio41";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	lcd_reset_n: lcd-reset-n-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdp_vsync_p: mdp-vsync-p-state {
+		pins = "gpio80";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	hst_bt_en: hst-bt-en-state {
+		pins = "gpio85";
+		function = "gpio";
+		output-low;
+		bias-disable;
+	};
+
+	hst_sw_ctrl: hst-sw-ctrl-state {
+		pins = "gpio86";
+		function = "gpio";
+		bias-pull-down;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart7 {
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-1 = <&bt_uart_sleep_cts>,
+		    <&bt_uart_sleep_rts>,
+		    <&bt_uart_sleep_txd>,
+		    <&bt_uart_sleep_rxd>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+
+		pinctrl-0 = <&hst_bt_en>,
+			    <&hst_sw_ctrl>;
+		pinctrl-names = "default";
+
+		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_l19b_1p8>;
+		vddaon-supply = <&vreg_s7b_0p952>;
+		vddbtcxmx-supply = <&vreg_s7b_0p952>;
+		vddrfacmn-supply = <&vreg_s7b_0p952>;
+		vddrfa0p8-supply = <&vreg_s7b_0p952>;
+		vddrfa1p7-supply = <&vdd19_pmu_rfa_i>;
+		vddrfa1p2-supply = <&vdd13_pmu_rfa_i>;
+		vddrfa2p2-supply = <&vreg_s1c_2p2>;
+		vddasd-supply = <&vreg_l11c_2p8>;
+		max-speed = <3200000>;
+
+		qcom,local-bd-address-broken;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p96>;
+	vcc-max-microamp = <800000>;
+	/*
+	 * Technically l9b enables an eLDO (supplied by s1b) which then powers
+	 * VCCQ2 of the UFS.
+	 */
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vdd_a_ufs_0_core>;
+	vdda-pll-supply = <&vdd_a_ufs_0_1p2>;
+	status = "okay";
+};
+
+&usb_1 {
+	/* USB 2.0 only */
+	qcom,select-utmi-as-pipe-clk;
+	dr_mode = "otg";
+	usb-role-switch;
+	maximum-speed = "high-speed";
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vdd_a_usbhs_core>;
+	vdda18-supply = <&vdd_a_usbhs_1p8>;
+	vdda33-supply = <&vdd_a_usbhs_3p1>;
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sm7325/nothing/spacewar/vpu20_1v.mbn";
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm7325.dtsi b/arch/arm64/boot/dts/qcom/sm7325.dtsi
new file mode 100644
index 000000000000..85d34b53e5e9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7325.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Eugene Lepshy <fekz115@gmail.com>
+ * Copyright (c) 2024, Danila Tikhonov <danila@jiaxyga.com>
+ */
+
+#include "sc7280.dtsi"
+
+/* SM7325 uses Kryo 670 */
+&cpu0 { compatible = "qcom,kryo670"; };
+&cpu1 { compatible = "qcom,kryo670"; };
+&cpu2 { compatible = "qcom,kryo670"; };
+&cpu3 { compatible = "qcom,kryo670"; };
+&cpu4 { compatible = "qcom,kryo670"; };
+&cpu5 { compatible = "qcom,kryo670"; };
+&cpu6 { compatible = "qcom,kryo670"; };
+&cpu7 { compatible = "qcom,kryo670"; };
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index bb161b536da4..0339a572f34d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8150.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -54,6 +55,17 @@
 			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -127,8 +139,6 @@
 		vdda_sp_sensor:
 		vdda_ufs_2ln_core_1:
 		vdda_ufs_2ln_core_2:
-		vdda_usb_ss_dp_core_1:
-		vdda_usb_ss_dp_core_2:
 		vdda_qlink_lv:
 		vdda_qlink_lv_ck:
 		vreg_l5a_0p875: ldo5 {
@@ -210,6 +220,12 @@
 			regulator-max-microvolt = <3008000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_l18a_0p8: ldo18 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
 	};
 
 	regulators-1 {
@@ -359,15 +375,207 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
 &gpu {
-	/*
-	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
-	 * after display support is added on this board.
-	 */
-	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
 	status = "okay";
 };
 
+&i2c4 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 152 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pm8150b_typec_sbu_out>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@3b {
+		compatible = "lontium,lt9611";
+		reg = <0x3b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s4a_1p8>;
+		vcc-supply = <&vreg_bob>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lt9611_b: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l5a_0p875>;
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+	status = "okay";
+};
+
+&mdss_dsi1_out {
+	remote-endpoint = <&lt9611_b>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi1_phy {
+	vdds-supply = <&vreg_l5a_0p875>;
+	status = "okay";
+};
+
+&pm8150b_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <3000000>;
+	status = "okay";
+};
+
+&pm8150b_typec {
+	status = "okay";
+
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "source";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		altmodes {
+			displayport {
+				svid = /bits/ 16 <0xff01>;
+				vdo = <0x00001c46>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pm8150b_hs_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pm8150b_typec_mux_in: endpoint {
+					remote-endpoint = <&usb_1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				pm8150b_typec_sbu_out: endpoint {
+					remote-endpoint = <&fsa4480_sbu_mux>;
+				};
+			};
+		};
+	};
+};
+
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -378,6 +586,10 @@
 	linux,code = <KEY_VOLUMEDOWN>;
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -394,6 +606,11 @@
 	firmware-name = "qcom/sm8150/cdsp.mbn";
 };
 
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8150/modem.mbn";
+	status = "okay";
+};
+
 &remoteproc_slpi {
 	status = "okay";
 
@@ -402,6 +619,13 @@
 
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <126 4>;
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio9";
+		function = "gpio";
+		bias-disable;
+	};
+
 };
 
 &uart2 {
@@ -445,13 +669,18 @@
 &usb_1_qmpphy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-pll-supply = <&vreg_l18a_0p8>;
+	orientation-switch;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pm8150b_typec_mux_in>;
 };
 
 &usb_2_qmpphy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-pll-supply = <&vreg_l5a_0p875>;
 };
 
 &usb_1 {
@@ -463,9 +692,25 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pm8150b_hs_in>;
 };
 
 &usb_2_dwc3 {
 	dr_mode = "host";
 };
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l1a_0p75>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+
+	qcom,calibration-variant = "Qualcomm_sm8150hdk";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
index b039773c4465..835ef929ff2d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -376,8 +376,8 @@
 		pinctrl-0 = <&da7280_intr_default>;
 
 		dlg,actuator-type = "LRA";
-		dlg,dlg,const-op-mode = <1>;
-		dlg,dlg,periodic-op-mode = <1>;
+		dlg,const-op-mode = <1>;
+		dlg,periodic-op-mode = <1>;
 		dlg,nom-microvolt = <2000000>;
 		dlg,abs-max-microvolt = <2000000>;
 		dlg,imax-microamp = <129000>;
@@ -430,6 +430,11 @@
 	/* MAX34417 @ 0x1e */
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -448,22 +453,22 @@
 
 &remoteproc_adsp {
 	status = "okay";
-	firmware-name = "qcom/sm8150/microsoft/adsp.mdt";
+	firmware-name = "qcom/sm8150/microsoft/adsp.mbn";
 };
 
 &remoteproc_cdsp {
 	status = "okay";
-	firmware-name = "qcom/sm8150/microsoft/cdsp.mdt";
+	firmware-name = "qcom/sm8150/microsoft/cdsp.mbn";
 };
 
 &remoteproc_mpss {
 	status = "okay";
-	firmware-name = "qcom/sm8150/microsoft/modem.mdt";
+	firmware-name = "qcom/sm8150/microsoft/modem.mbn";
 };
 
 &remoteproc_slpi {
 	status = "okay";
-	firmware-name = "qcom/sm8150/microsoft/slpi.mdt";
+	firmware-name = "qcom/sm8150/microsoft/slpi.mbn";
 };
 
 &pon_resin {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 286350ac7751..12e8e1ada6d8 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -355,14 +355,14 @@
 };
 
 &gpu {
-	/*
-	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
-	 * after display support is added on this board.
-	 */
-	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
 	status = "okay";
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -379,22 +379,22 @@
 
 &remoteproc_adsp {
 	status = "okay";
-	firmware-name = "qcom/sm8150/adsp.mdt";
+	firmware-name = "qcom/sm8150/adsp.mbn";
 };
 
 &remoteproc_cdsp {
 	status = "okay";
-	firmware-name = "qcom/sm8150/cdsp.mdt";
+	firmware-name = "qcom/sm8150/cdsp.mbn";
 };
 
 &remoteproc_mpss {
 	status = "okay";
-	firmware-name = "qcom/sm8150/modem.mdt";
+	firmware-name = "qcom/sm8150/modem.mbn";
 };
 
 &remoteproc_slpi {
 	status = "okay";
-	firmware-name = "qcom/sm8150/slpi.mdt";
+	firmware-name = "qcom/sm8150/slpi.mbn";
 };
 
 &tlmm {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index ae0ca48b89a5..70fd6455518b 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -601,6 +601,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 97623af13464..acdba79612aa 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -12,10 +12,13 @@
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm8150.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
+#include <dt-bindings/clock/qcom,videocc-sm8150.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sm8150.h>
+#include <dt-bindings/clock/qcom,sm8150-camcc.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -46,7 +49,7 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x0>;
@@ -54,20 +57,20 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <488>;
 			dynamic-power-coefficient = <232>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -75,7 +78,7 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x100>;
@@ -83,23 +86,23 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <488>;
 			dynamic-power-coefficient = <232>;
-			next-level-cache = <&L2_100>;
+			next-level-cache = <&l2_100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x200>;
@@ -107,23 +110,23 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <488>;
 			dynamic-power-coefficient = <232>;
-			next-level-cache = <&L2_200>;
+			next-level-cache = <&l2_200>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x300>;
@@ -131,23 +134,23 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <488>;
 			dynamic-power-coefficient = <232>;
-			next-level-cache = <&L2_300>;
+			next-level-cache = <&l2_300>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x400>;
@@ -155,23 +158,23 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <369>;
-			next-level-cache = <&L2_400>;
+			next-level-cache = <&l2_400>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x500>;
@@ -179,23 +182,23 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <369>;
-			next-level-cache = <&L2_500>;
+			next-level-cache = <&l2_500>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x600>;
@@ -203,23 +206,23 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <369>;
-			next-level-cache = <&L2_600>;
+			next-level-cache = <&l2_600>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x700>;
@@ -227,54 +230,54 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <421>;
-			next-level-cache = <&L2_700>;
+			next-level-cache = <&l2_700>;
 			qcom,freq-domain = <&cpufreq_hw 2>;
 			operating-points-v2 = <&cpu7_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -282,7 +285,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -292,7 +295,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -304,7 +307,7 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			cluster_sleep_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c244>;
 				entry-latency-us = <3263>;
@@ -626,57 +629,57 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CLUSTER_PD: power-domain-cpu-cluster0 {
+		cluster_pd: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			domain-idle-states = <&cluster_sleep_0>;
 		};
 	};
 
@@ -967,7 +970,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			gpu_speed_bin: gpu_speed_bin@133 {
+			gpu_speed_bin: gpu-speed-bin@133 {
 				reg = <0x133 0x1>;
 				bits = <5 3>;
 			};
@@ -1824,7 +1827,7 @@
 			      <0x0 0x010ad000 0x0 0x3000>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8150";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1843,29 +1846,43 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
-				      "slave_q2a",
-				      "tbu";
+				      "slave_q2a";
 
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
@@ -1878,13 +1895,23 @@
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -1915,7 +1942,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8150";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1934,29 +1961,43 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
-				      "slave_q2a",
-				      "tbu";
+				      "slave_q2a";
 
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
@@ -1972,13 +2013,23 @@
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_default_state>;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0e000 {
@@ -2016,7 +2067,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2061,29 +2112,23 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8150-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_CLK>;
 			clock-names = "ref",
-				      "ref_aux";
-			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+				      "ref_aux",
+				      "qref";
 
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -2206,6 +2251,7 @@
 
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -2436,7 +2482,7 @@
 				bias-disable;
 			};
 
-			qup_spi6_default: qup-spi6_default-state {
+			qup_spi6_default: qup-spi6-default-state {
 				pins = "gpio4", "gpio5", "gpio6", "gpio7";
 				function = "qup6";
 				drive-strength = <6>;
@@ -2450,7 +2496,7 @@
 				bias-disable;
 			};
 
-			qup_spi7_default: qup-spi7_default-state {
+			qup_spi7_default: qup-spi7-default-state {
 				pins = "gpio98", "gpio99", "gpio100", "gpio101";
 				function = "qup7";
 				drive-strength = <6>;
@@ -2957,11 +3003,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					replicator1_in: endpoint {
 						remote-endpoint = <&replicator_out1>;
 					};
@@ -3050,7 +3093,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07040000 0 0x1000>;
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3070,7 +3113,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07140000 0 0x1000>;
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3090,7 +3133,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07240000 0 0x1000>;
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3110,7 +3153,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07340000 0 0x1000>;
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3130,7 +3173,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07440000 0 0x1000>;
 
-			cpu = <&CPU4>;
+			cpu = <&cpu4>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3150,7 +3193,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07540000 0 0x1000>;
 
-			cpu = <&CPU5>;
+			cpu = <&cpu5>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3170,7 +3213,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07640000 0 0x1000>;
 
-			cpu = <&CPU6>;
+			cpu = <&cpu6>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3190,7 +3233,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07740000 0 0x1000>;
 
-			cpu = <&CPU7>;
+			cpu = <&cpu7>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3447,37 +3490,58 @@
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp_out>;
+					};
+				};
+			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8150-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x200>,
-				      <0 0x088eb400 0 0x200>,
-				      <0 0x088eb800 0 0x800>,
-				      <0 0x088eb600 0 0x200>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		sdhc_2: mmc@8804000 {
@@ -3565,12 +3629,16 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -3586,9 +3654,32 @@
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x140 0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
+					};
+				};
 			};
 		};
 
@@ -3618,12 +3709,16 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+			interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
 
@@ -3639,12 +3734,28 @@
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x160 0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
 
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,sm8150-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bi_tcxo";
+			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		camnoc_virt: interconnect@ac00000 {
 			compatible = "qcom,sm8150-camnoc-virt";
 			reg = <0 0x0ac00000 0 0x1000>;
@@ -3652,6 +3763,18 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sm8150-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_CAMERA_AHB_CLK>;
+			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sm8150-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -3684,7 +3807,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8150-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -3719,6 +3842,13 @@
 							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp_in>;
+						};
+					};
 				};
 
 				mdp_opp_table: opp-table {
@@ -3746,6 +3876,91 @@
 				};
 			};
 
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sm8150-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0x0ae90a00 0 0x600>,
+				      <0 0x0ae91000 0 0x600>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SM8150_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_dp_in>;
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
@@ -3769,8 +3984,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SM8150_MMCX>;
@@ -3862,8 +4077,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SM8150_MMCX>;
@@ -3918,10 +4133,10 @@
 			compatible = "qcom,sm8150-dispcc";
 			reg = <0 0x0af00000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -3932,6 +4147,7 @@
 				      "dp_phy_pll_link_clk",
 				      "dp_phy_pll_vco_div_clk";
 			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -4087,6 +4303,7 @@
 				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 		};
 
 		remoteproc_adsp: remoteproc@17300000 {
@@ -4153,6 +4370,7 @@
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
@@ -4170,7 +4388,7 @@
 			compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
@@ -4206,7 +4424,7 @@
 			frame@17c27000 {
 				frame-number = <3>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c26000 0x1000>;
+				reg = <0x17c27000 0x1000>;
 				status = "disabled";
 			};
 
@@ -4248,7 +4466,7 @@
 					  <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>,
 					  <CONTROL_TCS 1>;
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8150-rpmh-clk";
@@ -4344,7 +4562,7 @@
 			compatible = "qcom,sm8150-lmh";
 			reg = <0 0x18350800 0 0x400>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			cpus = <&CPU4>;
+			cpus = <&cpu4>;
 			qcom,lmh-temp-arm-millicelsius = <60000>;
 			qcom,lmh-temp-low-millicelsius = <84500>;
 			qcom,lmh-temp-high-millicelsius = <85000>;
@@ -4356,7 +4574,7 @@
 			compatible = "qcom,sm8150-lmh";
 			reg = <0 0x18358800 0 0x400>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			cpus = <&CPU0>;
+			cpus = <&cpu0>;
 			qcom,lmh-temp-arm-millicelsius = <60000>;
 			qcom,lmh-temp-low-millicelsius = <84500>;
 			qcom,lmh-temp-high-millicelsius = <85000>;
@@ -4399,7 +4617,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -4426,24 +4643,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu0_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu0_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -4470,24 +4686,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu1_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu1_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -4514,24 +4729,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu2_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu2_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -4558,24 +4772,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu3_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu3_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu4-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -4602,24 +4815,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu4_top_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu4_top_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu5-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -4646,24 +4858,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu5_top_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu5_top_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu6-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -4690,24 +4901,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu6_top_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu6_top_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu7-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -4734,24 +4944,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu7_top_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu7_top_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu4-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -4778,24 +4987,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu4_bottom_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu4_bottom_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu5-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -4822,24 +5030,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu5_bottom_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu5_bottom_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu6-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -4866,24 +5073,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu6_bottom_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu6_bottom_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu7-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -4910,24 +5116,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu7_bottom_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu7_bottom_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -4942,7 +5147,6 @@
 
 		cluster0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -4952,7 +5156,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster0_crit: cluster0_crit {
+				cluster0_crit: cluster0-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -4962,7 +5166,6 @@
 
 		cluster1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -4972,7 +5175,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster1_crit: cluster1_crit {
+				cluster1_crit: cluster1-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -4982,22 +5185,39 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 15>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu1_alert0: trip-point0 {
+				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -5012,7 +5232,6 @@
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -5027,7 +5246,6 @@
 
 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -5042,7 +5260,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -5057,7 +5274,6 @@
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -5072,7 +5288,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -5087,7 +5302,6 @@
 
 		compute-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -5102,7 +5316,6 @@
 
 		modem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -5117,7 +5330,6 @@
 
 		npu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 8>;
 
@@ -5132,7 +5344,6 @@
 
 		modem-vec-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 9>;
 
@@ -5147,7 +5358,6 @@
 
 		modem-scl-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 10>;
 
@@ -5162,16 +5372,34 @@
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 11>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu2_alert0: trip-point0 {
+				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
index 1bbb71e1a4fc..f5c193c6c5f9 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
@@ -373,6 +373,11 @@
 	status = "okay";
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 7ef99038cb37..7f592bd30248 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -53,8 +53,6 @@
 
 	thermal-zones {
 		camera-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 0>;
 
 			trips {
@@ -67,8 +65,6 @@
 		};
 
 		conn-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150b_adc_tm 0>;
 
 			trips {
@@ -81,8 +77,6 @@
 		};
 
 		mmw-pa1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 2>;
 
 			trips {
@@ -95,8 +89,6 @@
 		};
 
 		mmw-pa2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 2>;
 
 			trips {
@@ -109,8 +101,6 @@
 		};
 
 		skin-msm-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 1>;
 
 			trips {
@@ -123,8 +113,6 @@
 		};
 
 		skin-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 1>;
 
 			trips {
@@ -137,8 +125,6 @@
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 0>;
 
 			trips {
@@ -641,6 +627,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi
new file mode 100644
index 000000000000..cf3d917addd8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_n>;
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@9fa00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9fa00000 0x0 0x100000>;
+			record-size = <0x4000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+			pmsg-size = <0x40000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&pm8150_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio3";
+		function = "normal";
+		power-source = <0>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <40 4>; /* I2C (Unused) */
+};
+
+&usb_1 {
+	/* Limit to USB 2.0 for now */
+	qcom,select-utmi-as-pipe-clk;
+
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts b/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
new file mode 100644
index 000000000000..dc7c3816f156
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "sm8250-samsung-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy S20 FE";
+	compatible = "samsung,r8q", "qcom,sm8250";
+	chassis-type = "handset";
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/Samsung/r8q/adsp.mbn";
+	status = "okay";
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/Samsung/r8q/cdsp.mbn";
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/Samsung/r8q/slpi.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-x1q.dts b/arch/arm64/boot/dts/qcom/sm8250-samsung-x1q.dts
new file mode 100644
index 000000000000..d6aeb5af2ba4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-x1q.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "sm8250-samsung-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy S20";
+	compatible = "samsung,x1q", "qcom,sm8250";
+	chassis-type = "handset";
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/Samsung/x1q/adsp.mbn";
+	status = "okay";
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/Samsung/x1q/cdsp.mbn";
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/Samsung/x1q/slpi.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index e07d0311ecb5..d8289b2698f3 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -520,7 +520,7 @@
 		compatible = "samsung,s6sy761";
 		reg = <0x48>;
 		interrupt-parent = <&tlmm>;
-		interrupts = <39 0x2008>;
+		interrupts = <39 IRQ_TYPE_LEVEL_LOW>;
 		/* It's "vddio" downstream but it works anyway! */
 		vdd-supply = <&vreg_l1c_1p8>;
 		avdd-supply = <&vreg_l10c_3p3>;
@@ -591,6 +591,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 85e5cf3dc91e..465fd6e954a3 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -1,11 +1,12 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /*
- * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com>
+ * Copyright (c) 2022-2024 Jianhua Lu <lujianhua000@gmail.com>
  */
 
 #include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8250.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -23,12 +24,16 @@
 /delete-node/ &xbl_aop_mem;
 
 / {
-	classis-type = "tablet";
+	chassis-type = "tablet";
 
 	/* required for bootloader to select correct board */
 	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
 	qcom,board-id = <0x10008 0>;
 
+	aliases {
+		serial0 = &uart6;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -96,6 +101,67 @@
 		};
 	};
 
+	qca6390-pmu {
+		compatible = "qcom,qca6390-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+
+		vddaon-supply = <&vreg_s6a_0p95>;
+		vddpmu-supply = <&vreg_s6a_0p95>;
+		vddrfa0p95-supply = <&vreg_s6a_0p95>;
+		vddrfa1p3-supply = <&vreg_s8c_1p35>;
+		vddrfa1p9-supply = <&vreg_s5a_1p9>;
+		vddpcie1p3-supply = <&vreg_s8c_1p35>;
+		vddpcie1p9-supply = <&vreg_s5a_1p9>;
+		vddio-supply = <&vreg_s4a_1p8>;
+
+		wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -114,7 +180,7 @@
 	};
 
 	reserved-memory {
-		xbl_aop_mem: xbl-aop@80700000 {
+		xbl_aop_mem: xbl-aop@80600000 {
 			reg = <0x0 0x80600000 0x0 0x260000>;
 			no-map;
 		};
@@ -550,6 +616,7 @@
 		vddio-supply = <&vreg_l14a_1p88>;
 		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
 		backlight = <&backlight>;
+		rotation = <90>;
 
 		status = "disabled";
 
@@ -592,7 +659,8 @@
 	qcom,dual-dsi-mode;
 	qcom,sync-dual-dsi;
 	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 	status = "okay";
 };
 
@@ -617,6 +685,25 @@
 	status = "okay";
 };
 
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1101";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+
+		qcom,calibration-variant = "Xiaomi_Pad_5Pro";
+	};
+};
+
 &pm8150_gpios {
 	vol_up_n: vol-up-n-state {
 		pins = "gpio6";
@@ -627,6 +714,55 @@
 	};
 };
 
+&pm8150b_typec {
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		op-sink-microwatt = <10000000>;
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		sink-pdos = <PDO_FIXED(5000, 3000,
+				       PDO_FIXED_DUAL_ROLE |
+				       PDO_FIXED_USB_COMM |
+				       PDO_FIXED_DATA_SWAP)
+				       PDO_VAR(5000, 12000, 5000)>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				pm8150b_hs_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs_out>;
+				};
+			};
+		};
+	};
+};
+
+&pm8150b_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <3000000>;
+	status = "okay";
+};
+
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -655,6 +791,37 @@
 
 &tlmm {
 	gpio-reserved-ranges = <40 4>;
+
+	bt_en_state: bt-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+
+	wlan_en_state: wlan-default-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6390-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+	};
 };
 
 &usb_1 {
@@ -664,11 +831,12 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	maximum-speed = "high-speed";
 	/* Remove USB3 phy */
 	phys = <&usb_1_hsphy>;
 	phy-names = "usb2-phy";
+	usb-role-switch;
 };
 
 &usb_1_hsphy {
@@ -678,6 +846,10 @@
 	status = "okay";
 };
 
+&usb_1_dwc3_hs_out {
+	remote-endpoint = <&pm8150b_hs_in>;
+};
+
 &ufs_mem_hc {
 	vcc-supply = <&vreg_l17a_3p0>;
 	vcc-max-microamp = <800000>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
new file mode 100644
index 000000000000..4ad24974c09f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
@@ -0,0 +1,542 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Copyright (c) 2023 Luka Panio <lukapanio@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/*
+ * Delete following upstream (sm8250.dtsi) reserved
+ * memory mappings which are different on this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_secure_heap;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &xbl_aop_mem;
+
+/ {
+
+	model = "Xiaomi Pad 6";
+	compatible = "xiaomi,pipa", "qcom,sm8250";
+
+	chassis-type = "tablet";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
+	qcom,board-id = <0x34 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			width = <1800>;
+			height = <2880>;
+			stride = <(1800 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <8840000>;
+		energy-full-design-microwatt-hours = <34300000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4370000>;
+	};
+
+	bl_vddpos_5p5: bl-vddpos-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddpos_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	bl_vddneg_5p5: bl-vddneg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddneg_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0x0 0x80600000 0x0 0x260000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x2f00000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8bb00000 {
+			reg = <0x0 0x8bb00000 0x0 0x2500000>;
+			no-map;
+		};
+
+		spss_mem: spss@8e000000 {
+			reg = <0x0 0x8e000000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: cdsp-secure-heap@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x4600000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@b0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xb0000000 0x0 0x400000>;
+			record-size = <0x1000>;
+			console-size = <0x200000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/adsp.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		/* (S1+S2+S3) - cx.lvl (ARC) */
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L7 is unused. */
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L10 is unused, L11 - lcx.lvl (ARC) */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-name = "vreg_l14a_1p88";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L15 & L16 are unused. */
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p35>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		/*
+		 * S1-S6 are ARCs:
+		 * (S1+S2) - gfx.lvl,
+		 * S3 - mx.lvl,
+		 * (S4+S5) - mmcx.lvl,
+		 * S6 - ebi.lvl
+		 */
+
+		vreg_s7c_0p35: smps7 {
+			regulator-name = "vreg_s7c_0p35";
+			regulator-min-microvolt = <348000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p35: smps8 {
+			regulator-name = "vreg_s8c_1p35";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L2-4 are unused. */
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_2p85: ldo7 {
+			regulator-name = "vreg_l7c_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p0: ldo11 {
+			regulator-name = "vreg_l11c_3p0";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/cdsp.mbn";
+	status = "okay";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn";
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	backlight: backlight@11 {
+		compatible = "kinetic,ktz8866";
+		reg = <0x11>;
+		vddpos-supply = <&bl_vddpos_5p5>;
+		vddneg-supply = <&bl_vddneg_5p5>;
+		enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+		current-num-sinks = <5>;
+		kinetic,current-ramp-delay-ms = <128>;
+		kinetic,led-enable-ramp-delay-ms = <1>;
+		kinetic,enable-lcd-bias;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&pm8150_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/slpi.mbn";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index be970472f6c4..50dd11432bb2 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -5,11 +5,10 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm8250.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8250.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
-#include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h>
-#include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
@@ -86,7 +85,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -95,7 +94,7 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x0>;
@@ -103,21 +102,21 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
 			dynamic-power-coefficient = <105>;
-			next-level-cache = <&L2_0>;
-			power-domains = <&CPU_PD0>;
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-size = <0x20000>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-size = <0x400000>;
@@ -126,7 +125,7 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x100>;
@@ -134,24 +133,24 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
 			dynamic-power-coefficient = <105>;
-			next-level-cache = <&L2_100>;
-			power-domains = <&CPU_PD1>;
+			next-level-cache = <&l2_100>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-size = <0x20000>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x200>;
@@ -159,24 +158,24 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
 			dynamic-power-coefficient = <105>;
-			next-level-cache = <&L2_200>;
-			power-domains = <&CPU_PD2>;
+			next-level-cache = <&l2_200>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-size = <0x20000>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x300>;
@@ -184,24 +183,24 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
 			dynamic-power-coefficient = <105>;
-			next-level-cache = <&L2_300>;
-			power-domains = <&CPU_PD3>;
+			next-level-cache = <&l2_300>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-size = <0x20000>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x400>;
@@ -209,24 +208,24 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <379>;
-			next-level-cache = <&L2_400>;
-			power-domains = <&CPU_PD4>;
+			next-level-cache = <&l2_400>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-size = <0x40000>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x500>;
@@ -234,24 +233,24 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <379>;
-			next-level-cache = <&L2_500>;
-			power-domains = <&CPU_PD5>;
+			next-level-cache = <&l2_500>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-size = <0x40000>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x600>;
@@ -259,24 +258,24 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <379>;
-			next-level-cache = <&L2_600>;
-			power-domains = <&CPU_PD6>;
+			next-level-cache = <&l2_600>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-size = <0x40000>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo485";
 			reg = <0x0 0x700>;
@@ -284,55 +283,55 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <444>;
-			next-level-cache = <&L2_700>;
-			power-domains = <&CPU_PD7>;
+			next-level-cache = <&l2_700>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 2>;
 			operating-points-v2 = <&cpu7_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-size = <0x80000>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -340,7 +339,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -350,7 +349,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -362,7 +361,7 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			cluster_sleep_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c244>;
 				entry-latency-us = <3264>;
@@ -608,7 +607,7 @@
 		};
 
 		cpu7_opp9: opp-1747200000 {
-			opp-hz = /bits/ 64 <1708800000>;
+			opp-hz = /bits/ 64 <1747200000>;
 			opp-peak-kBps = <5412000 42393600>;
 		};
 
@@ -671,6 +670,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8250", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
 			#reset-cells = <1>;
 		};
 	};
@@ -690,57 +690,57 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CLUSTER_PD: power-domain-cpu-cluster0 {
+		cluster_pd: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			domain-idle-states = <&cluster_sleep_0>;
 		};
 	};
 
@@ -974,7 +974,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			gpu_speed_bin: gpu_speed_bin@19b {
+			gpu_speed_bin: gpu-speed-bin@19b {
 				reg = <0x19b 0x1>;
 				bits = <5 3>;
 			};
@@ -1030,7 +1030,7 @@
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1075,7 +1075,7 @@
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1120,7 +1120,7 @@
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1165,7 +1165,7 @@
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1227,7 +1227,7 @@
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1289,7 +1289,7 @@
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1370,7 +1370,7 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1415,7 +1415,7 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1460,7 +1460,7 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1522,7 +1522,7 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1567,7 +1567,7 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1612,7 +1612,7 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1657,7 +1657,7 @@
 				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1719,7 +1719,7 @@
 				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1797,7 +1797,7 @@
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1842,7 +1842,7 @@
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1887,7 +1887,7 @@
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1932,7 +1932,7 @@
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1977,7 +1977,7 @@
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -2039,7 +2039,7 @@
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -2123,7 +2123,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -2150,15 +2150,23 @@
 				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi0", "msi1", "msi2", "msi3",
-					  "msi4", "msi5", "msi6", "msi7";
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -2196,6 +2204,16 @@
 			dma-coherent;
 
 			status = "disabled";
+
+			pcieport0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -2227,7 +2245,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2247,14 +2265,30 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
@@ -2297,6 +2331,16 @@
 			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0e000 {
@@ -2328,7 +2372,7 @@
 			status = "disabled";
 		};
 
-		pcie2: pci@1c10000 {
+		pcie2: pcie@1c10000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c10000 0 0x3000>,
 			      <0 0x64000000 0 0xf1d>,
@@ -2348,14 +2392,30 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
 
-			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
 				 <&gcc GCC_PCIE_2_AUX_CLK>,
@@ -2398,6 +2458,16 @@
 			dma-coherent;
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie2_phy: phy@1c16000 {
@@ -2434,7 +2504,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2463,46 +2533,63 @@
 				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-			freq-table-hz =
-				<37500000 300000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
+
+			operating-points-v2 = <&ufs_opp_table>;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-37500000 {
+					opp-hz = /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8250-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "ref",
-				      "ref_aux";
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_1X_CLKREF_EN>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -2543,17 +2630,21 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8250-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
 		wsamacro: codec@3240000 {
 			compatible = "qcom,sm8250-lpass-wsa-macro";
 			reg = <0 0x03240000 0 0x1000>;
-			clocks = <&audiocc LPASS_CDC_WSA_MCLK>,
-				 <&audiocc LPASS_CDC_WSA_NPL>,
+			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-				 <&aoncc LPASS_CDC_VA_MCLK>,
 				 <&vamacro>;
 
-			clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
@@ -2565,7 +2656,7 @@
 			status = "disabled";
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			reg = <0 0x03250000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
@@ -2587,20 +2678,10 @@
 			status = "disabled";
 		};
 
-		audiocc: clock-controller@3300000 {
-			compatible = "qcom,sm8250-lpass-audiocc";
-			reg = <0 0x03300000 0 0x30000>;
-			#clock-cells = <1>;
-			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-				<&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			clock-names = "core", "audio", "bus";
-		};
-
 		vamacro: codec@3370000 {
 			compatible = "qcom,sm8250-lpass-va-macro";
 			reg = <0 0x03370000 0 0x1000>;
-			clocks = <&aoncc LPASS_CDC_VA_MCLK>,
+			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 
@@ -2631,7 +2712,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			reg = <0 0x03210000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			status = "disabled";
@@ -2678,7 +2759,7 @@
 		};
 
 		/* tx macro */
-		swr2: soundwire-controller@3230000 {
+		swr2: soundwire@3230000 {
 			reg = <0 0x03230000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
@@ -2705,16 +2786,6 @@
 			#size-cells = <0>;
 		};
 
-		aoncc: clock-controller@3380000 {
-			compatible = "qcom,sm8250-lpass-aoncc";
-			reg = <0 0x03380000 0 0x40000>;
-			#clock-cells = <1>;
-			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-				<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			clock-names = "core", "audio", "bus";
-		};
-
 		lpass_tlmm: pinctrl@33c0000 {
 			compatible = "qcom,sm8250-lpass-lpi-pinctrl";
 			reg = <0 0x033c0000 0x0 0x20000>,
@@ -2869,6 +2940,7 @@
 
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -3006,7 +3078,7 @@
 			compatible = "qcom,sm8250-slpi-pas";
 			reg = <0 0x05c00000 0 0x4000>;
 
-			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3095,11 +3167,8 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					tpda_out_funnel_qatb: endpoint {
 						remote-endpoint = <&funnel_qatb_in_tpda>;
 					};
@@ -3142,11 +3211,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_qatb_in_tpda: endpoint {
 						remote-endpoint = <&tpda_out_funnel_qatb>;
 					};
@@ -3355,11 +3420,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					etf_in_funnel_swao_out: endpoint {
 						remote-endpoint = <&funnel_swao_out_etf>;
 					};
@@ -3443,8 +3505,6 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				port {
 					tpdm_mm_out_tpda9: endpoint {
 						remote-endpoint = <&tpda_9_in_tpdm_mm>;
@@ -3469,7 +3529,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07040000 0 0x1000>;
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3488,7 +3548,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07140000 0 0x1000>;
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3507,7 +3567,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07240000 0 0x1000>;
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3526,7 +3586,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07340000 0 0x1000>;
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3545,7 +3605,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07440000 0 0x1000>;
 
-			cpu = <&CPU4>;
+			cpu = <&cpu4>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3564,7 +3624,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07540000 0 0x1000>;
 
-			cpu = <&CPU5>;
+			cpu = <&cpu5>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3583,7 +3643,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07640000 0 0x1000>;
 
-			cpu = <&CPU6>;
+			cpu = <&cpu6>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3602,7 +3662,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07740000 0 0x1000>;
 
-			cpu = <&CPU7>;
+			cpu = <&cpu7>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3710,11 +3770,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_apss_merg_in_funnel_apss: endpoint {
 					remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
 					};
@@ -3726,7 +3782,7 @@
 			compatible = "qcom,sm8250-cdsp-pas";
 			reg = <0 0x08300000 0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3866,6 +3922,8 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			orientation-switch;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3877,6 +3935,10 @@
 
 				port@1 {
 					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss_out>;
+					};
 				};
 
 				port@2 {
@@ -3889,32 +3951,26 @@
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8250-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x200>,
-				      <0 0x088eb400 0 0x200>,
-				      <0 0x088eb800 0 0x800>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		sdhc_2: mmc@8804000 {
@@ -4131,16 +4187,19 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
+			wakeup-source;
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
@@ -4155,11 +4214,29 @@
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_1_role_switch_out: endpoint {};
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs_out: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
+					};
 				};
 			};
 		};
@@ -4199,16 +4276,19 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
+			wakeup-source;
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
@@ -4223,7 +4303,9 @@
 				iommus = <&apps_smmu 0x20 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4256,14 +4338,6 @@
 
 			status = "disabled";
 
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
-
 			venus_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -4410,20 +4484,20 @@
 				    "vfe_lite0",
 				    "vfe_lite1";
 
-			interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csiphy0",
 					  "csiphy1",
 					  "csiphy2",
@@ -4577,7 +4651,6 @@
 			clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
 			power-domains = <&rpmhpd RPMHPD_MMCX>;
 			required-opps = <&rpmhpd_opp_low_svs>;
-			status = "disabled";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -4615,7 +4688,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8250-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -4698,16 +4771,20 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -4716,7 +4793,7 @@
 				#sound-dai-cells = <0>;
 
 				operating-points-v2 = <&dp_opp_table>;
-				power-domains = <&rpmhpd SM8250_MMCX>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
 
 				status = "disabled";
 
@@ -4786,8 +4863,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -4878,8 +4957,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -4936,10 +5017,10 @@
 			power-domains = <&rpmhpd RPMHPD_MMCX>;
 			required-opps = <&rpmhpd_opp_low_svs>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -5888,7 +5969,7 @@
 			compatible = "qcom,sm8250-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -6007,6 +6088,7 @@
 
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
@@ -6018,7 +6100,7 @@
 			compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
@@ -6094,7 +6176,7 @@
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8250-rpmh-clk";
@@ -6205,7 +6287,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -6232,24 +6313,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu0_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu0_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -6276,24 +6356,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu1_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu1_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -6320,24 +6399,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu2_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu2_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -6364,24 +6442,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu3_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu3_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu4-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -6408,24 +6485,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu4_top_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu4_top_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu5-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -6452,24 +6528,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu5_top_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu5_top_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu6-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -6496,24 +6571,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu6_top_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu6_top_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu7-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -6540,24 +6614,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu7_top_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu7_top_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu4-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -6584,24 +6657,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu4_bottom_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu4_bottom_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu5-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -6628,24 +6700,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu5_bottom_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu5_bottom_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu6-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -6672,24 +6743,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu6_bottom_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu6_bottom_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu7-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -6716,24 +6786,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu7_bottom_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu7_bottom_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -6748,7 +6817,6 @@
 
 		cluster0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -6758,7 +6826,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster0_crit: cluster0_crit {
+				cluster0_crit: cluster0-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -6768,7 +6836,6 @@
 
 		cluster1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -6778,7 +6845,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster1_crit: cluster1_crit {
+				cluster1_crit: cluster1-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -6788,22 +6855,39 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 15>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu1_alert0: trip-point0 {
+				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -6818,7 +6902,6 @@
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -6833,7 +6916,6 @@
 
 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -6848,7 +6930,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -6863,7 +6944,6 @@
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -6878,7 +6958,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -6893,7 +6972,6 @@
 
 		compute-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -6908,7 +6986,6 @@
 
 		npu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -6923,16 +7000,34 @@
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 8>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu2_alert0: trip-point0 {
+				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index b43d264ed42b..24a8c91e9f70 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -42,6 +42,7 @@
 		compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";
@@ -381,22 +382,14 @@
 	firmware-name = "qcom/sm8350/cdsp.mbn";
 };
 
-&dispcc {
-	status = "okay";
-};
-
 &mdss_dsi0 {
 	vdda-supply = <&vreg_l6b_1p2>;
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy  {
@@ -485,17 +478,10 @@
 
 &mdss_dp {
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp0_out: endpoint {
-				data-lanes = <0 1>;
-				remote-endpoint = <&usb_1_qmpphy_dp_in>;
-			};
-		};
-	};
+&mdss_dp_out {
+	data-lanes = <0 1>;
 };
 
 &mpss {
@@ -863,10 +849,6 @@
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
-};
-
 &usb_1_hsphy {
 	status = "okay";
 
@@ -880,22 +862,12 @@
 
 	vdda-phy-supply = <&vreg_l6b_1p2>;
 	vdda-pll-supply = <&vreg_l1b_0p88>;
-
-	orientation-switch;
-};
-
-&usb_1_qmpphy_dp_in {
-	remote-endpoint = <&mdss_dp0_out>;
 };
 
 &usb_1_qmpphy_out {
 	remote-endpoint = <&pmic_glink_ss_in>;
 };
 
-&usb_1_qmpphy_usb_ss_in {
-	remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
 &usb_2 {
 	status = "okay";
 };
@@ -949,3 +921,10 @@
 		};
 	};
 };
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&pil_ipa_fw_mem>;
+	status = "okay";
+	firmware-name = "qcom/sm8350/ipa_fws.mbn";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index b46236235b7f..fc4ce9d4977e 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -6,12 +6,14 @@
 #include <dt-bindings/interconnect/qcom,sm8350.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm8350.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sm8350.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/phy/phy-qcom-qmp.h>
@@ -20,6 +22,7 @@
 #include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/interconnect/qcom,sm8350.h>
 
@@ -41,7 +44,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -50,23 +53,23 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -74,171 +77,171 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_100>;
+			next-level-cache = <&l2_100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_200>;
+			next-level-cache = <&l2_200>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x300>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_300>;
+			next-level-cache = <&l2_300>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a78";
 			reg = <0x0 0x400>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_400>;
+			next-level-cache = <&l2_400>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a78";
 			reg = <0x0 0x500>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_500>;
+			next-level-cache = <&l2_500>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a78";
 			reg = <0x0 0x600>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_600>;
+			next-level-cache = <&l2_600>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "arm,cortex-x1";
 			reg = <0x0 0x700>;
 			clocks = <&cpufreq_hw 2>;
 			enable-method = "psci";
-			next-level-cache = <&L2_700>;
+			next-level-cache = <&l2_700>;
 			qcom,freq-domain = <&cpufreq_hw 2>;
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -246,7 +249,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -256,7 +259,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -268,7 +271,7 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 {
+			cluster_sleep_apss_off: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
 				entry-latency-us = <2752>;
@@ -276,7 +279,7 @@
 				min-residency-us = <6118>;
 			};
 
-			CLUSTER_SLEEP_AOSS_SLEEP: cluster-sleep-1 {
+			cluster_sleep_aoss_sleep: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c344>;
 				entry-latency-us = <3263>;
@@ -289,6 +292,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8350", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
 			#reset-cells = <1>;
 		};
 	};
@@ -299,8 +303,18 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-x1 {
+		compatible = "arm,cortex-x1-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
@@ -308,57 +322,57 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CLUSTER_PD: power-domain-cpu-cluster0 {
+		cluster_pd: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_AOSS_SLEEP>;
+			domain-idle-states = <&cluster_sleep_apss_off &cluster_sleep_aoss_sleep>;
 		};
 	};
 
@@ -443,7 +457,7 @@
 			no-map;
 		};
 
-		pil_camera_mem: mmeory@85200000 {
+		pil_camera_mem: memory@85200000 {
 			reg = <0x0 0x85200000 0x0 0x500000>;
 			no-map;
 		};
@@ -677,9 +691,9 @@
 				 <0>,
 				 <0>,
 				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
 				 <0>;
 		};
@@ -919,9 +933,9 @@
 			};
 		};
 
-		gpi_dma0: dma-controller@9800000 {
+		gpi_dma0: dma-controller@900000 {
 			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
-			reg = <0 0x09800000 0 0x60000>;
+			reg = <0 0x00900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -1498,7 +1512,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8350";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1524,15 +1538,23 @@
 				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi0", "msi1", "msi2", "msi3",
-					  "msi4", "msi5", "msi6", "msi7";
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1565,6 +1587,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -1591,7 +1623,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8350";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1610,14 +1642,30 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -1648,6 +1696,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0e000 {
@@ -1679,7 +1737,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -1709,6 +1767,11 @@
 				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
 			freq-table-hz =
 				<75000000 300000000>,
 				<0 0>,
@@ -1723,28 +1786,24 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "ref",
-				      "ref_aux";
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_1_CLKREF_EN>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -1753,11 +1812,11 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x594 0x0011>,
 				 <&apps_smmu 0x596 0x0011>;
-			/* FIXME: Probing BAM DMA causes some abort and system hang */
-			status = "fail";
 		};
 
 		crypto: crypto@1dfa000 {
@@ -1769,8 +1828,6 @@
 				 <&apps_smmu 0x596 0x0011>;
 			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
 			interconnect-names = "memory";
-			/* FIXME: dependency BAM DMA is disabled */
-			status = "disabled";
 		};
 
 		ipa: ipa@1e40000 {
@@ -1818,6 +1875,147 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8350-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
+		adsp: remoteproc@3000000 {
+			compatible = "qcom,sm8350-adsp-pas";
+			reg = <0x0 0x03000000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1801 0x0>;
+
+							dai@0 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+							};
+
+							dai@1 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
+							};
+
+							dai@2 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		lpass_tlmm: pinctrl@33c0000 {
 			compatible = "qcom,sm8350-lpass-lpi-pinctrl";
 			reg = <0 0x033c0000 0 0x20000>,
@@ -1849,6 +2047,7 @@
 			operating-points-v2 = <&gpu_opp_table>;
 
 			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -2019,9 +2218,9 @@
 
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8350-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2063,7 +2262,7 @@
 			compatible = "qcom,sm8350-slpi-pas";
 			reg = <0 0x05c00000 0 0x4000>;
 
-			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2192,6 +2391,12 @@
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
+		refgen: regulator@88e7000 {
+			compatible = "qcom,sm8350-refgen-regulator",
+				     "qcom,sm8250-refgen-regulator";
+			reg = <0x0 0x088e7000 0x0 0x84>;
+		};
+
 		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sm8350-qmp-usb3-dp-phy";
 			reg = <0 0x088e8000 0 0x3000>;
@@ -2209,6 +2414,8 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			orientation-switch;
+
 			status = "disabled";
 
 			ports {
@@ -2226,6 +2433,7 @@
 					reg = <1>;
 
 					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
 					};
 				};
 
@@ -2233,39 +2441,33 @@
 					reg = <2>;
 
 					usb_1_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp_out>;
 					};
 				};
 			};
 		};
 
-		usb_2_qmpphy: phy-wrapper@88eb000 {
+		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8350-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
+			reg = <0 0x088eb000 0 0x2000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
-
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			usb_2_ssphy: phy@88ebe00 {
-				reg = <0 0x088ebe00 0 0x200>,
-				      <0 0x088ec000 0 0x200>,
-				      <0 0x088eb200 0 0x1100>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 		};
 
 		dc_noc: interconnect@90c0000 {
@@ -2298,6 +2500,115 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		cdsp: remoteproc@a300000 {
+			compatible = "qcom,sm8350-cdsp-pas";
+			reg = <0x0 0x0a300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x2161 0x0400>,
+							 <&apps_smmu 0x1181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x2162 0x0400>,
+							 <&apps_smmu 0x1182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2163 0x0400>,
+							 <&apps_smmu 0x1183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2164 0x0400>,
+							 <&apps_smmu 0x1184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2165 0x0400>,
+							 <&apps_smmu 0x1185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x2166 0x0400>,
+							 <&apps_smmu 0x1186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x2167 0x0400>,
+							 <&apps_smmu 0x1187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x2168 0x0400>,
+							 <&apps_smmu 0x1188 0x0420>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -2321,14 +2632,16 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -2344,7 +2657,10 @@
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
@@ -2363,6 +2679,7 @@
 						reg = <1>;
 
 						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 						};
 					};
 				};
@@ -2394,14 +2711,16 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
 
@@ -2417,8 +2736,11 @@
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x20 0x0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -2429,8 +2751,12 @@
 			reg-names = "mdss";
 
 			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
-					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem", "mdp1-mem";
+					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem",
+					     "cpu-cfg";
 
 			power-domains = <&dispcc MDSS_GDSC>;
 			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
@@ -2453,39 +2779,10 @@
 			#size-cells = <2>;
 			ranges;
 
-			dpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				/* TODO: opp-200000000 should work with
-				 * &rpmhpd_opp_low_svs, but one some of
-				 * sm8350_hdk boards reboot using this
-				 * opp.
-				 */
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-300000000 {
-					opp-hz = /bits/ 64 <300000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-345000000 {
-					opp-hz = /bits/ 64 <345000000>;
-					required-opps = <&rpmhpd_opp_svs_l1>;
-				};
-
-				opp-460000000 {
-					opp-hz = /bits/ 64 <460000000>;
-					required-opps = <&rpmhpd_opp_nom>;
-				};
-			};
-
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8350-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -2510,6 +2807,35 @@
 				interrupt-parent = <&mdss>;
 				interrupts = <0>;
 
+				dpu_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					/* TODO: opp-200000000 should work with
+					 * &rpmhpd_opp_low_svs, but one some of
+					 * sm8350_hdk boards reboot using this
+					 * opp.
+					 */
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -2550,16 +2876,20 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -2582,6 +2912,14 @@
 							remote-endpoint = <&dpu_intf0_out>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_dp_in>;
+						};
+					};
 				};
 
 				dp_opp_table: opp-table {
@@ -2632,11 +2970,12 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi0_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
+				refgen-supply = <&refgen>;
 
 				phys = <&mdss_dsi0_phy>;
 
@@ -2730,11 +3069,12 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi1_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
+				refgen-supply = <&refgen>;
 
 				phys = <&mdss_dsi1_phy>;
 
@@ -2810,8 +3150,10 @@
 			compatible = "qcom,sm8350-dispcc";
 			reg = <0 0x0af00000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -3201,146 +3543,12 @@
 				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		adsp: remoteproc@17300000 {
-			compatible = "qcom,sm8350-adsp-pas";
-			reg = <0 0x17300000 0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			memory-region = <&pil_adsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				apr {
-					compatible = "qcom,apr-v2";
-					qcom,glink-channels = "apr_audio_svc";
-					qcom,domain = <APR_DOMAIN_ADSP>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					service@3 {
-						reg = <APR_SVC_ADSP_CORE>;
-						compatible = "qcom,q6core";
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-					};
-
-					q6afe: service@4 {
-						compatible = "qcom,q6afe";
-						reg = <APR_SVC_AFE>;
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-						q6afedai: dais {
-							compatible = "qcom,q6afe-dais";
-							#address-cells = <1>;
-							#size-cells = <0>;
-							#sound-dai-cells = <1>;
-						};
-
-						q6afecc: clock-controller {
-							compatible = "qcom,q6afe-clocks";
-							#clock-cells = <2>;
-						};
-					};
-
-					q6asm: service@7 {
-						compatible = "qcom,q6asm";
-						reg = <APR_SVC_ASM>;
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-						q6asmdai: dais {
-							compatible = "qcom,q6asm-dais";
-							#address-cells = <1>;
-							#size-cells = <0>;
-							#sound-dai-cells = <1>;
-							iommus = <&apps_smmu 0x1801 0x0>;
-
-							dai@0 {
-								reg = <0>;
-							};
-
-							dai@1 {
-								reg = <1>;
-							};
-
-							dai@2 {
-								reg = <2>;
-							};
-						};
-					};
-
-					q6adm: service@8 {
-						compatible = "qcom,q6adm";
-						reg = <APR_SVC_ADM>;
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-						q6routing: routing {
-							compatible = "qcom,q6adm-routing";
-							#sound-dai-cells = <0>;
-						};
-					};
-				};
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1803 0x0>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1804 0x0>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1805 0x0>;
-					};
-				};
-			};
+			dma-coherent;
 		};
 
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
@@ -3423,7 +3631,7 @@
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>, <CONTROL_TCS 0>;
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8350-rpmh-clk";
@@ -3507,121 +3715,11 @@
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
 		};
-
-		cdsp: remoteproc@98900000 {
-			compatible = "qcom,sm8350-cdsp-pas";
-			reg = <0 0x98900000 0 0x1400000>;
-
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
-					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_CX>,
-					<&rpmhpd RPMHPD_MXC>;
-			power-domain-names = "cx", "mxc";
-
-			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
-
-			memory-region = <&pil_cdsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_cdsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_CDSP
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "cdsp";
-				qcom,remote-pid = <5>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "cdsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@1 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <1>;
-						iommus = <&apps_smmu 0x2161 0x0400>,
-							 <&apps_smmu 0x1181 0x0420>;
-					};
-
-					compute-cb@2 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <2>;
-						iommus = <&apps_smmu 0x2162 0x0400>,
-							 <&apps_smmu 0x1182 0x0420>;
-					};
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x2163 0x0400>,
-							 <&apps_smmu 0x1183 0x0420>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x2164 0x0400>,
-							 <&apps_smmu 0x1184 0x0420>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x2165 0x0400>,
-							 <&apps_smmu 0x1185 0x0420>;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-						iommus = <&apps_smmu 0x2166 0x0400>,
-							 <&apps_smmu 0x1186 0x0420>;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-						iommus = <&apps_smmu 0x2167 0x0400>,
-							 <&apps_smmu 0x1187 0x0420>;
-					};
-
-					compute-cb@8 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <8>;
-						iommus = <&apps_smmu 0x2168 0x0400>,
-							 <&apps_smmu 0x1188 0x0420>;
-					};
-
-					/* note: secure cb9 in downstream */
-				};
-			};
-		};
 	};
 
 	thermal_zones: thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -3648,24 +3746,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu0_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu0_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -3692,24 +3789,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu1_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu1_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -3736,24 +3832,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu2_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu2_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -3780,24 +3875,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu3_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu3_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu4-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -3824,24 +3918,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu4_top_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu4_top_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu5-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -3868,24 +3961,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu5_top_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu5_top_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu6-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -3912,24 +4004,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu6_top_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu6_top_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu7-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -3956,24 +4047,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu7_top_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu7_top_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu4-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -4000,24 +4090,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu4_bottom_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu4_bottom_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu5-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -4044,24 +4133,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu5_bottom_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu5_bottom_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu6-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -4088,24 +4176,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu6_bottom_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu6_bottom_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		cpu7-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -4132,24 +4219,23 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu7_bottom_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu7_bottom_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -4164,7 +4250,6 @@
 
 		cluster0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -4174,7 +4259,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster0_crit: cluster0_crit {
+				cluster0_crit: cluster0-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -4184,7 +4269,6 @@
 
 		cluster1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -4194,7 +4278,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster1_crit: cluster1_crit {
+				cluster1_crit: cluster1-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -4204,7 +4288,6 @@
 
 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -4219,37 +4302,72 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu1_alert0: trip-point0 {
+				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu2_alert0: trip-point0 {
+				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		nspss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -4264,7 +4382,6 @@
 
 		nspss2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -4279,7 +4396,6 @@
 
 		nspss3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -4294,7 +4410,6 @@
 
 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -4309,7 +4424,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -4324,7 +4438,6 @@
 
 		modem1-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 8>;
 
@@ -4339,7 +4452,6 @@
 
 		modem2-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 9>;
 
@@ -4354,7 +4466,6 @@
 
 		modem3-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 10>;
 
@@ -4369,7 +4480,6 @@
 
 		modem4-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 11>;
 
@@ -4384,7 +4494,6 @@
 
 		camera-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 12>;
 
@@ -4399,7 +4508,6 @@
 
 		cam-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 13>;
 
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index 20153d08edde..0c6aa7ddf432 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -26,6 +26,7 @@
 
 	aliases {
 		serial0 = &uart7;
+		serial1 = &uart20;
 	};
 
 	wcd938x: audio-codec {
@@ -95,6 +96,7 @@
 		compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";
@@ -137,7 +139,7 @@
 	thermal-zones {
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 2>;
 
 			trips {
@@ -151,7 +153,7 @@
 
 		rear-tof-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 5>;
 
 			trips {
@@ -165,7 +167,7 @@
 
 		skin-msm-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 1>;
 
 			trips {
@@ -179,7 +181,7 @@
 
 		therm1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 3>;
 
 			trips {
@@ -193,7 +195,7 @@
 
 		therm2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 6>;
 
 			trips {
@@ -207,7 +209,7 @@
 
 		usb-conn-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 7>;
 
 			trips {
@@ -221,7 +223,7 @@
 
 		wide-rfc-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 4>;
 
 			trips {
@@ -234,8 +236,6 @@
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pmk8350_adc_tm 0>;
 
 			trips {
@@ -248,6 +248,71 @@
 		};
 	};
 
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-0 = <&bt_en>, <&wlan_en>, <&xo_clk_default>;
+		pinctrl-names = "default";
+
+		wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+		xo-clk-gpios = <&tlmm 204 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s10b_1p8>;
+		vddaon-supply = <&vreg_s11b_0p95>;
+		vddpmu-supply = <&vreg_s12b_1p25>;
+		vddpmumx-supply = <&vreg_s2e_0p85>;
+		vddpmucx-supply = <&vreg_s11b_0p95>;
+		vddrfa0p95-supply = <&vreg_s11b_0p95>;
+		vddrfa1p3-supply = <&vreg_s12b_1p25>;
+		vddrfa1p9-supply = <&vreg_s1c_1p86>;
+		vddpcie1p3-supply = <&vreg_s12b_1p25>;
+		vddpcie1p9-supply = <&vreg_s1c_1p86>;
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -576,8 +641,12 @@
 	};
 };
 
-&dispcc {
+&gpu {
 	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8450/a730_zap.mbn";
+	};
 };
 
 &i2c9 {
@@ -665,17 +734,10 @@
 
 &mdss_dp0 {
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp0_out: endpoint {
-				data-lanes = <0 1>;
-				remote-endpoint = <&usb_1_qmpphy_dp_in>;
-			};
-		};
-	};
+&mdss_dp0_out {
+	data-lanes = <0 1>;
 };
 
 &pcie0 {
@@ -689,6 +751,23 @@
 	vdda-pll-supply = <&vreg_l6b_1p2>;
 };
 
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+	};
+};
+
 &pcie1 {
 	status = "okay";
 };
@@ -896,6 +975,10 @@
 	status = "okay";
 };
 
+&qupv3_id_2 {
+	status = "okay";
+};
+
 &sdhc_2 {
 	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default", "sleep";
@@ -930,8 +1013,8 @@
 			"TX DMIC3", "MIC BIAS1",
 			"TX SWR_INPUT0", "ADC1_OUTPUT",
 			"TX SWR_INPUT1", "ADC2_OUTPUT",
-			"TX SWR_INPUT2", "ADC3_OUTPUT",
-			"TX SWR_INPUT3", "ADC4_OUTPUT";
+			"TX SWR_INPUT0", "ADC3_OUTPUT",
+			"TX SWR_INPUT1", "ADC4_OUTPUT";
 
 	wcd-playback-dai-link {
 		link-name = "WCD Playback";
@@ -1073,6 +1156,26 @@
 	status = "okay";
 };
 
+&uart20 {
+	pinctrl-0 = <&uart20_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+	};
+};
+
 &ufs_mem_hc {
 	status = "okay";
 
@@ -1096,19 +1199,10 @@
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "otg";
-	usb-role-switch;
-};
-
 &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
-};
-
 &usb_1_hsphy {
 	status = "okay";
 
@@ -1122,24 +1216,14 @@
 
 	vdda-phy-supply = <&vreg_l6b_1p2>;
 	vdda-pll-supply = <&vreg_l1b_0p91>;
-
-	orientation-switch;
-};
-
-&usb_1_qmpphy_dp_in {
-	remote-endpoint = <&mdss_dp0_out>;
 };
 
 &usb_1_qmpphy_out {
 	remote-endpoint = <&pmic_glink_ss_in>;
 };
 
-&usb_1_qmpphy_usb_ss_in {
-	remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
 &vamacro {
-	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 	pinctrl-names = "default";
 	vdd-micb-supply = <&vreg_s10b_1p8>;
 	qcom,dmic-sample-rate = <600000>;
@@ -1148,6 +1232,14 @@
 };
 
 &tlmm {
+	bt_en: bt-en-state {
+		pins = "gpio81";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-down;
+	};
+
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio1";
 		function = "gpio";
@@ -1171,4 +1263,46 @@
 		bias-disable;
 		output-low;
 	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio80";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-down;
+	};
+
+	uart20_default: uart20-default-state {
+		cts-pins {
+			pins = "gpio76";
+			function = "qup20";
+			bias-disable;
+		};
+
+		rts-pins {
+			pins = "gpio77";
+			function = "qup20";
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio78";
+			function = "qup20";
+			bias-disable;
+		};
+
+		tx-pins {
+			pins = "gpio79";
+			function = "qup20";
+			bias-disable;
+		};
+	};
+
+	xo_clk_default: xo-clk-state {
+		pins = "gpio204";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-down;
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index c7d05945aa51..56db5f79f59d 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -28,6 +28,49 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	pmic-glink {
+		compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+					};
+				};
+
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -349,6 +392,10 @@
 	};
 };
 
+&dispcc {
+	status = "disabled";
+};
+
 &pcie0 {
 	status = "okay";
 };
@@ -457,8 +504,8 @@
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "peripheral";
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
 &usb_1_hsphy {
@@ -467,6 +514,14 @@
 	vdda-pll-supply = <&vreg_l5b_0p88>;
 	vdda18-supply = <&vreg_l1c_1p8>;
 	vdda33-supply = <&vreg_l2b_3p07>;
+	qcom,squelch-detector-bp = <(-2090)>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,pre-emphasis-amplitude-bp = <40000>;
+	qcom,pre-emphasis-duration-bp = <20000>;
+	qcom,hs-amplitude-bp = <2000>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
+	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+	qcom,hs-rise-fall-time-bp = <(-4100)>;
 };
 
 &usb_1_qmpphy {
@@ -475,3 +530,7 @@
 	vdda-phy-supply = <&vreg_l6b_1p2>;
 	vdda-pll-supply = <&vreg_l1b_0p91>;
 };
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts b/arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
new file mode 100644
index 000000000000..880d74ae6032
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sm8450.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350c.dtsi"
+
+/ {
+	model = "Samsung Galaxy S22 5G";
+	compatible = "samsung,r0q", "qcom,sm8450";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@b8000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		/*
+		 * The bootloader will only keep display hardware enabled
+		 * if this memory region is named exactly 'splash_region'
+		 */
+		splash-region@b8000000 {
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			no-map;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <36 4>; /* SPI (not linked to anything) */
+};
+
+&usb_1 {
+	/* Keep USB 2.0 only for now */
+	qcom,select-utmi-as-pipe-clk;
+
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
index 8b29fcf483a3..6bd315e10992 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -468,6 +468,10 @@
 	};
 };
 
+&dispcc {
+	status = "disabled";
+};
+
 &gpi_dma0 {
 	status = "okay";
 };
@@ -488,7 +492,7 @@
 		compatible = "samsung,s6sy761";
 		reg = <0x48>;
 		interrupt-parent = <&tlmm>;
-		interrupts = <21 0x2008>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&pm8350c_l2>;
 		avdd-supply = <&pm8350c_l3>;
 
@@ -777,11 +781,8 @@
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "peripheral";
+	status = "okay";
 };
 
 &usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 1783fa78bdbc..23420e692472 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -4,10 +4,12 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm8450.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-camcc.h>
 #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8450-gpucc.h>
 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
@@ -18,6 +20,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sm8450.h>
+#include <dt-bindings/reset/qcom,sm8450-gpucc.h>
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
@@ -41,7 +44,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 		};
 	};
 
@@ -49,23 +52,23 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo780";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-			power-domains = <&CPU_PD0>;
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 0>;
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -73,171 +76,171 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo780";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
-			next-level-cache = <&L2_100>;
-			power-domains = <&CPU_PD1>;
+			next-level-cache = <&l2_100>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 0>;
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo780";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
-			next-level-cache = <&L2_200>;
-			power-domains = <&CPU_PD2>;
+			next-level-cache = <&l2_200>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 0>;
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo780";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
-			next-level-cache = <&L2_300>;
-			power-domains = <&CPU_PD3>;
+			next-level-cache = <&l2_300>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 0>;
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo780";
 			reg = <0x0 0x400>;
 			enable-method = "psci";
-			next-level-cache = <&L2_400>;
-			power-domains = <&CPU_PD4>;
+			next-level-cache = <&l2_400>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 1>;
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo780";
 			reg = <0x0 0x500>;
 			enable-method = "psci";
-			next-level-cache = <&L2_500>;
-			power-domains = <&CPU_PD5>;
+			next-level-cache = <&l2_500>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 1>;
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo780";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
-			next-level-cache = <&L2_600>;
-			power-domains = <&CPU_PD6>;
+			next-level-cache = <&l2_600>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 1>;
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo780";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
-			next-level-cache = <&L2_700>;
-			power-domains = <&CPU_PD7>;
+			next-level-cache = <&l2_700>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 2>;
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 2>;
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -245,7 +248,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -255,7 +258,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -267,7 +270,7 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			cluster_sleep_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
 				entry-latency-us = <1050>;
@@ -275,7 +278,7 @@
 				min-residency-us = <5309>;
 			};
 
-			CLUSTER_SLEEP_1: cluster-sleep-1 {
+			cluster_sleep_1: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c344>;
 				entry-latency-us = <2700>;
@@ -285,6 +288,192 @@
 		};
 	};
 
+	ete-0 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu0>;
+
+		out-ports {
+			port {
+				ete0_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete0>;
+				};
+			};
+		};
+	};
+
+	ete-1 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu1>;
+
+		out-ports {
+			port {
+				ete1_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete1>;
+				};
+			};
+		};
+	};
+
+	ete-2 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu2>;
+
+		out-ports {
+			port {
+				ete2_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete2>;
+				};
+			};
+		};
+	};
+
+	ete-3 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu3>;
+
+		out-ports {
+			port {
+				ete3_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete3>;
+				};
+			};
+		};
+	};
+
+	ete-4 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu4>;
+
+		out-ports {
+			port {
+				ete4_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete4>;
+				};
+			};
+		};
+	};
+
+	ete-5 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu5>;
+
+		out-ports {
+			port {
+				ete5_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete5>;
+				};
+			};
+		};
+	};
+
+	ete-6 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu6>;
+
+		out-ports {
+			port {
+				ete6_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete6>;
+				};
+			};
+		};
+	};
+
+	ete-7 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu7>;
+
+		out-ports {
+			port {
+				ete7_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete7>;
+				};
+			};
+		};
+	};
+
+	funnel-ete {
+		compatible = "arm,coresight-static-funnel";
+
+		out-ports {
+			port {
+				funnel_ete_out_funnel_apss: endpoint {
+					remote-endpoint =
+						<&funnel_apss_in_funnel_ete>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel_ete_in_ete0: endpoint {
+					remote-endpoint =
+						<&ete0_out_funnel_ete>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel_ete_in_ete1: endpoint {
+					remote-endpoint =
+						<&ete1_out_funnel_ete>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel_ete_in_ete2: endpoint {
+					remote-endpoint =
+						<&ete2_out_funnel_ete>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel_ete_in_ete3: endpoint {
+					remote-endpoint =
+						<&ete3_out_funnel_ete>;
+				};
+			};
+
+			port@4 {
+				reg = <4>;
+				funnel_ete_in_ete4: endpoint {
+					remote-endpoint =
+						<&ete4_out_funnel_ete>;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				funnel_ete_in_ete5: endpoint {
+					remote-endpoint =
+						<&ete5_out_funnel_ete>;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				funnel_ete_in_ete6: endpoint {
+					remote-endpoint =
+						<&ete6_out_funnel_ete>;
+				};
+			};
+
+			port@7 {
+				reg = <7>;
+				funnel_ete_in_ete7: endpoint {
+					remote-endpoint =
+						<&ete7_out_funnel_ete>;
+				};
+			};
+		};
+	};
+
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8450", "qcom,scm";
@@ -321,57 +510,57 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CLUSTER_PD: power-domain-cpu-cluster0 {
+		cluster_pd: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
+			domain-idle-states = <&cluster_sleep_0>, <&cluster_sleep_1>;
 		};
 	};
 
@@ -752,11 +941,11 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&sleep_clk>,
 				 <&pcie0_phy>,
-				 <&pcie1_phy>,
-				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&pcie1_phy QMP_PCIE_PIPE_CLK>,
+				 <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo",
 				      "sleep_clk",
@@ -1026,6 +1215,12 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart20_default>;
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1418,6 +1613,12 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 		};
@@ -1739,7 +1940,12 @@
 			};
 		};
 
-		pcie0: pci@1c00000 {
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8450-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8450-pcie0";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1758,21 +1964,39 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
-			/*
-			 * MSIs for BDF (1:0.0) only works with Device ID 0x5980.
-			 * Hence, the IDs are swapped.
-			 */
-			msi-map = <0x0 &gic_its 0x5981 0x1>,
-				  <0x100 &gic_its 0x5980 0x1>;
+			msi-map = <0x0 &gic_its 0x5980 0x1>,
+				  <0x100 &gic_its 0x5981 0x1>;
 			msi-map-mask = <0xff00>;
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
@@ -1816,7 +2040,44 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
 
+			operating-points-v2 = <&pcie0_opp_table>;
+
 			status = "disabled";
+
+			pcie0_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+			};
+
+			pcieport0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -1848,7 +2109,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8450-pcie1";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1867,25 +2128,43 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			/*
-			 * MSIs for BDF (1:0.0) only works with Device ID 0x5a00.
-			 * Hence, the IDs are swapped.
-			 */
-			msi-map = <0x0 &gic_its 0x5a01 0x1>,
-				  <0x100 &gic_its 0x5a00 0x1>;
+			msi-map = <0x0 &gic_its 0x5a00 0x1>,
+				  <0x100 &gic_its 0x5a01 0x1>;
 			msi-map-mask = <0xff00>;
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
-				 <&pcie1_phy>,
+				 <&pcie1_phy QMP_PCIE_PIPE_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -1923,6 +2202,126 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_default_state>;
 
+			operating-points-v2 = <&pcie1_opp_table>;
+
+			status = "disabled";
+
+			pcie1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 and GEN 4 x1 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+				/* GEN 4 x2 */
+				opp-32000000 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+				};
+			};
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie1_ep: pcie-ep@1c08000 {
+			compatible = "qcom,sm8450-pcie-ep";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40200000 0x0 0x1000000>,
+			      <0x0 0x01c0b000 0x0 0x1000>,
+			      <0x0 0x40002000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "addr_space",
+				    "mmio",
+				    "dma";
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "ddrss_sf_tbu",
+				      "aggre_noc_axi";
+
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global",
+					  "doorbell",
+					  "dma";
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			iommus = <&apps_smmu 0x1c80 0x7f>;
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_1_GDSC>;
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+			num-lanes = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_default_state>;
+
 			status = "disabled";
 		};
 
@@ -1942,7 +2341,7 @@
 				      "pipe";
 
 			clock-output-names = "pcie_1_pipe_clk";
-			#clock-cells = <0>;
+			#clock-cells = <1>;
 
 			#phy-cells = <0>;
 
@@ -2014,6 +2413,207 @@
 			reg = <0x0 0x1fc0000 0x0 0x30000>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-730.1", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-818000000 {
+					opp-hz = /bits/ 64 <818000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-791000000 {
+					opp-hz = /bits/ 64 <791000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-734000000 {
+					opp-hz = /bits/ 64 <734000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-640000000 {
+					opp-hz = /bits/ 64 <640000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-599000000 {
+					opp-hz = /bits/ 64 <599000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-545000000 {
+					opp-hz = /bits/ 64 <545000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-492000000 {
+					opp-hz = /bits/ 64 <492000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-421000000 {
+					opp-hz = /bits/ 64 <421000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+				};
+
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-317000000 {
+					opp-hz = /bits/ 64 <317000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-285000000 {
+					opp-hz = /bits/ 64 <285000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-730.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b290000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8450-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8450-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "gmu",
+				      "hub",
+				      "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sm8450-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
@@ -2044,6 +2644,8 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			orientation-switch;
+
 			status = "disabled";
 
 			ports {
@@ -2061,6 +2663,7 @@
 					reg = <1>;
 
 					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
 					};
 				};
 
@@ -2068,6 +2671,7 @@
 					reg = <2>;
 
 					usb_1_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
 					};
 				};
 			};
@@ -2115,6 +2719,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "sdsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -2140,6 +2745,112 @@
 			};
 		};
 
+		remoteproc_adsp: remoteproc@3000000 {
+			compatible = "qcom,sm8450-adsp-pas";
+			reg = <0x0 0x03000000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1801 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		wsa2macro: codec@31e0000 {
 			compatible = "qcom,sm8450-lpass-wsa-macro";
 			reg = <0 0x031e0000 0 0x1000>;
@@ -2149,18 +2860,13 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "wsa2-mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa2_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr4: soundwire-controller@31f0000 {
+		swr4: soundwire@31f0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x031f0000 0 0x2000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2168,6 +2874,9 @@
 			clock-names = "iface";
 			label = "WSA2";
 
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
 
@@ -2197,18 +2906,12 @@
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2218,6 +2921,9 @@
 			qcom,din-ports = <0>;
 			qcom,dout-ports = <5>;
 
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
 			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
@@ -2243,14 +2949,9 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
@@ -2264,18 +2965,12 @@
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03250000 0 0x2000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2283,6 +2978,9 @@
 			clock-names = "iface";
 			label = "WSA";
 
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
 
@@ -2302,17 +3000,20 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@33b0000 {
+		swr2: soundwire@33b0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x033b0000 0 0x2000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wakeup";
 
-			clocks = <&vamacro>;
+			clocks = <&txmacro>;
 			clock-names = "iface";
 			label = "TX";
 
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
 			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
@@ -2339,8 +3040,6 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "mclk", "macro", "dcodec", "npl";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
@@ -2348,114 +3047,9 @@
 			status = "disabled";
 		};
 
-		remoteproc_adsp: remoteproc@30000000 {
-			compatible = "qcom,sm8450-adsp-pas";
-			reg = <0 0x30000000 0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			memory-region = <&adsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			remoteproc_adsp_glink: glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				gpr {
-					compatible = "qcom,gpr";
-					qcom,glink-channels = "adsp_apps";
-					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-					qcom,intents = <512 20>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					q6apm: service@1 {
-						compatible = "qcom,q6apm";
-						reg = <GPR_APM_MODULE_IID>;
-						#sound-dai-cells = <0>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6apmdai: dais {
-							compatible = "qcom,q6apm-dais";
-							iommus = <&apps_smmu 0x1801 0x0>;
-						};
-
-						q6apmbedai: bedais {
-							compatible = "qcom,q6apm-lpass-dais";
-							#sound-dai-cells = <1>;
-						};
-					};
-
-					q6prm: service@2 {
-						compatible = "qcom,q6prm";
-						reg = <GPR_PRM_MODULE_IID>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6prmcc: clock-controller {
-							compatible = "qcom,q6prm-lpass-clocks";
-							#clock-cells = <2>;
-						};
-					};
-				};
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1803 0x0>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1804 0x0>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1805 0x0>;
-					};
-				};
-			};
-		};
-
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,sm8450-cdsp-pas";
-			reg = <0 0x32300000 0 0x1400000>;
+			reg = <0 0x32300000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2495,6 +3089,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "cdsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -2561,7 +3156,7 @@
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8450-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2604,8 +3199,10 @@
 			reg = <0 0x0aaf0000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_VIDEO_AHB_CLK>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
-			required-opps = <&rpmhpd_opp_low_svs>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -2696,12 +3293,13 @@
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>,
 				 <&sleep_clk>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
-			required-opps = <&rpmhpd_opp_low_svs>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-			status = "disabled";
 		};
 
 		mdss: display-subsystem@ae00000 {
@@ -2742,7 +3340,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8450-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -2836,16 +3434,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -2868,6 +3470,14 @@
 							remote-endpoint = <&dpu_intf0_out>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_dp_in>;
+						};
+		};
 				};
 
 				dp_opp_table: opp-table {
@@ -2916,8 +3526,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -3008,8 +3620,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -3068,10 +3682,10 @@
 				 <&rpmhcc RPMH_CXO_CLK_A>,
 				 <&gcc GCC_DISP_AHB_CLK>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <0>, /* dp1 */
@@ -3085,7 +3699,6 @@
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-			status = "disabled";
 		};
 
 		pdc: interrupt-controller@b220000 {
@@ -3133,6 +3746,7 @@
 		sram@c3f0000 {
 			compatible = "qcom,rpmh-stats";
 			reg = <0 0x0c3f0000 0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
 		};
 
 		spmi_bus: spmi@c400000 {
@@ -3739,7 +4353,7 @@
 				};
 			};
 
-			dmic02_default: dmic02-default-state {
+			dmic23_default: dmic23-default-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
@@ -3791,6 +4405,546 @@
 			};
 		};
 
+		stm@10002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x0 0x10002000 0x0 0x1000>,
+				<0x0 0x16280000 0x0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out_funnel_in0: endpoint {
+						remote-endpoint =
+							<&funnel_in0_in_stm>;
+					};
+				};
+			};
+		};
+
+		funnel@10041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10041000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel_in0_in_stm: endpoint {
+						remote-endpoint =
+							<&stm_out_funnel_in0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_in0_out_funnel_qdss: endpoint {
+						remote-endpoint =
+							<&funnel_qdss_in_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@10042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x10042000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel_in1_in_funnel_apss: endpoint {
+						remote-endpoint =
+							<&funnel_apss_out_funnel_in1>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					funnel_in1_in_funnel_dl_center: endpoint {
+						remote-endpoint =
+							<&funnel_dl_center_out_funnel_in1>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_in1_out_funnel_qdss: endpoint {
+						remote-endpoint =
+							<&funnel_qdss_in_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@10045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10045000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_qdss_in_funnel_in0: endpoint {
+						remote-endpoint =
+							<&funnel_in0_out_funnel_qdss>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_qdss_in_funnel_in1: endpoint {
+						remote-endpoint =
+							<&funnel_in1_out_funnel_qdss>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_qdss_out_funnel_aoss: endpoint {
+						remote-endpoint =
+							<&funnel_aoss_in_funnel_qdss>;
+					};
+				};
+			};
+		};
+
+		replicator@10046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x10046000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator_qdss_in_replicator_swao: endpoint {
+						remote-endpoint =
+							<&replicator_swao_out_replicator_qdss>;
+					};
+				};
+			};
+
+			out-ports {
+
+				port {
+					replicator_qdss_out_replicator_etr: endpoint {
+						remote-endpoint =
+							<&replicator_etr_in_replicator_qdss>;
+					};
+				};
+			};
+		};
+
+		tmc_etr: tmc@10048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x10048000 0x0 0x1000>;
+
+			iommus = <&apps_smmu 0x0600 0>;
+			arm,buffer-size = <0x10000>;
+
+			arm,scatter-gather;
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tmc_etr_in_replicator_etr: endpoint {
+						remote-endpoint =
+							<&replicator_etr_out_tmc_etr>;
+					};
+				};
+			};
+		};
+
+		replicator@1004e000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x1004e000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator_etr_in_replicator_qdss: endpoint {
+						remote-endpoint =
+							<&replicator_qdss_out_replicator_etr>;
+					};
+				};
+			};
+
+			out-ports {
+
+				port {
+
+					replicator_etr_out_tmc_etr: endpoint {
+						remote-endpoint =
+							<&tmc_etr_in_replicator_etr>;
+					};
+				};
+			};
+		};
+
+		funnel@10b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x10b04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					funnel_aoss_in_tpda_aoss: endpoint {
+						remote-endpoint =
+							<&tpda_aoss_out_funnel_aoss>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					funnel_aoss_in_funnel_qdss: endpoint {
+						remote-endpoint =
+							<&funnel_qdss_out_funnel_aoss>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_aoss_out_tmc_etf: endpoint {
+						remote-endpoint =
+							<&tmc_etf_in_funnel_aoss>;
+					};
+				};
+			};
+		};
+
+		tmc@10b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x10b05000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tmc_etf_in_funnel_aoss: endpoint {
+						remote-endpoint =
+							<&funnel_aoss_out_tmc_etf>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tmc_etf_out_replicator_swao: endpoint {
+						remote-endpoint =
+							<&replicator_swao_in_tmc_etf>;
+					};
+				};
+			};
+		};
+
+		replicator@10b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x10b06000 0x0 0x1000>;
+
+			qcom,replicator-loses-context;
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator_swao_in_tmc_etf: endpoint {
+						remote-endpoint =
+							<&tmc_etf_out_replicator_swao>;
+					};
+				};
+			};
+
+			out-ports {
+
+				port {
+					replicator_swao_out_replicator_qdss: endpoint {
+						remote-endpoint =
+							<&replicator_qdss_in_replicator_swao>;
+					};
+				};
+			};
+		};
+
+		tpda@10b08000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+
+			reg = <0x0 0x10b08000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					tpda_aoss_in_tpdm_swao_prio_0: endpoint {
+						remote-endpoint =
+							<&tpdm_swao_prio_0_out_tpda_aoss>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					tpda_aoss_in_tpdm_swao: endpoint {
+						remote-endpoint =
+							<&tpdm_swao_out_tpda_aoss>;
+					};
+				};
+			};
+
+			out-ports {
+
+				port {
+					tpda_aoss_out_funnel_aoss: endpoint {
+						remote-endpoint =
+							<&funnel_aoss_in_tpda_aoss>;
+					};
+				};
+			};
+		};
+
+		tpdm@10b09000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10b09000 0x0 0x1000>;
+
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_swao_prio_0_out_tpda_aoss: endpoint {
+						remote-endpoint =
+							<&tpda_aoss_in_tpdm_swao_prio_0>;
+					};
+				};
+			};
+		};
+
+		tpdm@10b0d000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10b0d000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_swao_out_tpda_aoss: endpoint {
+						remote-endpoint =
+							<&tpda_aoss_in_tpdm_swao>;
+					};
+				};
+			};
+		};
+
+		tpdm@10c28000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10c28000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_dlct_out_tpda_dl_center_26: endpoint {
+						remote-endpoint =
+							<&tpda_dl_center_26_in_tpdm_dlct>;
+					};
+				};
+			};
+		};
+
+		tpdm@10c29000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10c29000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_ipcc_out_tpda_dl_center_27: endpoint {
+						remote-endpoint =
+							<&tpda_dl_center_27_in_tpdm_ipcc>;
+					};
+				};
+			};
+		};
+
+		cti@10c2a000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x10c2a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@10c2b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x10c2b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpda@10c2e000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x10c2e000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1a {
+					reg = <26>;
+					tpda_dl_center_26_in_tpdm_dlct: endpoint {
+						remote-endpoint =
+							<&tpdm_dlct_out_tpda_dl_center_26>;
+					};
+				};
+
+				port@1b {
+					reg = <27>;
+					tpda_dl_center_27_in_tpdm_ipcc: endpoint {
+						remote-endpoint =
+							<&tpdm_ipcc_out_tpda_dl_center_27>;
+					};
+				};
+			};
+
+			out-ports {
+
+				port {
+					tpda_dl_center_out_funnel_dl_center: endpoint {
+						remote-endpoint =
+							<&funnel_dl_center_in_tpda_dl_center>;
+					};
+				};
+			};
+		};
+
+		funnel@10c2f000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10c2f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+
+				port {
+					funnel_dl_center_in_tpda_dl_center: endpoint {
+						remote-endpoint =
+							<&tpda_dl_center_out_funnel_dl_center>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_dl_center_out_funnel_in1: endpoint {
+						remote-endpoint =
+							<&funnel_in1_in_funnel_dl_center>;
+					};
+				};
+			};
+		};
+
+		funnel@13810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x13810000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+
+				port {
+					funnel_apss_in_funnel_ete: endpoint {
+						remote-endpoint =
+							<&funnel_ete_out_funnel_apss>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_apss_out_funnel_in1: endpoint {
+						remote-endpoint =
+							<&funnel_in1_in_funnel_apss>;
+					};
+				};
+			};
+		};
+
+		cti@138e0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x138e0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@138f0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x138f0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@13900000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x13900000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
 		sram@146aa000 {
 			compatible = "qcom,sm8450-imem", "syscon", "simple-mfd";
 			reg = <0 0x146aa000 0 0x1000>;
@@ -3907,6 +5061,7 @@
 				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 		};
 
 		intc: interrupt-controller@17100000 {
@@ -4004,7 +5159,7 @@
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  3>, <SLEEP_TCS   2>,
 					  <WAKE_TCS    2>, <CONTROL_TCS 0>;
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
@@ -4111,9 +5266,10 @@
 			compatible = "qcom,sm8450-llcc";
 			reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>,
 			      <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>,
-			      <0 0x19a00000 0 0x80000>;
+			      <0 0x19a00000 0 0x80000>, <0 0x19c00000 0 0x80000>;
 			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
-				    "llcc3_base", "llcc_broadcast_base";
+				    "llcc3_base", "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -4122,7 +5278,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -4171,28 +5327,22 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8450-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref", "ref_aux", "qref";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
 				 <&gcc GCC_UFS_0_CLKREF_EN>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		ice: crypto@1d88000 {
@@ -4208,6 +5358,8 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x584 0x11>,
 				 <&apps_smmu 0x588 0x0>,
@@ -4272,13 +5424,10 @@
 			};
 		};
 
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,sm8450-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
+		usb_1: usb@a600000 {
+			compatible = "qcom,sm8450-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a600000 0 0xfc100>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -4297,14 +5446,18 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -4314,32 +5467,32 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xcd00>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x0 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
-				phy-names = "usb2-phy", "usb3-phy";
+			iommus = <&apps_smmu 0x0 0x0>;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy", "usb3-phy";
+			usb-role-switch;
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+				port@0 {
+					reg = <0>;
 
-						usb_1_dwc3_hs: endpoint {
-						};
+					usb_1_dwc3_hs: endpoint {
 					};
+				};
 
-					port@1 {
-						reg = <1>;
+				port@1 {
+					reg = <1>;
 
-						usb_1_dwc3_ss: endpoint {
-						};
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 					};
 				};
 			};
@@ -4365,8 +5518,6 @@
 
 	thermal-zones {
 		aoss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -4385,8 +5536,6 @@
 		};
 
 		cpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
@@ -4405,8 +5554,6 @@
 		};
 
 		cpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
@@ -4425,8 +5572,6 @@
 		};
 
 		cpuss3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
@@ -4445,8 +5590,6 @@
 		};
 
 		cpuss4-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
@@ -4465,8 +5608,6 @@
 		};
 
 		cpu4-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
@@ -4491,8 +5632,6 @@
 		};
 
 		cpu4-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
@@ -4517,8 +5656,6 @@
 		};
 
 		cpu5-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
@@ -4543,8 +5680,6 @@
 		};
 
 		cpu5-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -4569,8 +5704,6 @@
 		};
 
 		cpu6-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
@@ -4595,8 +5728,6 @@
 		};
 
 		cpu6-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
@@ -4621,8 +5752,6 @@
 		};
 
 		cpu7-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
@@ -4647,8 +5776,6 @@
 		};
 
 		cpu7-middle-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
@@ -4673,8 +5800,6 @@
 		};
 
 		cpu7-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
@@ -4700,71 +5825,71 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens0 14>;
 
-			trips {
-				thermal-engine-config {
-					temperature = <125000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				thermal-hal-config {
-					temperature = <125000>;
+			trips {
+				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				reset-mon-cfg {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
 				};
 
-				gpu0_tj_cfg: tj-cfg {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens0 15>;
 
-			trips {
-				thermal-engine-config {
-					temperature = <125000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				thermal-hal-config {
-					temperature = <125000>;
+			trips {
+				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				reset-mon-cfg {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
 				};
 
-				gpu1_tj_cfg: tj-cfg {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		aoss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 0>;
 
 			trips {
@@ -4783,8 +5908,6 @@
 		};
 
 		cpu0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
@@ -4809,8 +5932,6 @@
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
@@ -4835,8 +5956,6 @@
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
@@ -4861,8 +5980,6 @@
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
@@ -4888,7 +6005,7 @@
 
 		cdsp0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
@@ -4920,7 +6037,7 @@
 
 		cdsp1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 6>;
 
 			trips {
@@ -4952,7 +6069,7 @@
 
 		cdsp2-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 7>;
 
 			trips {
@@ -4983,8 +6100,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
@@ -5004,7 +6119,7 @@
 
 		mem-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
@@ -5029,8 +6144,6 @@
 		};
 
 		modem0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 10>;
 
 			trips {
@@ -5061,8 +6174,6 @@
 		};
 
 		modem1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 11>;
 
 			trips {
@@ -5093,8 +6204,6 @@
 		};
 
 		modem2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 12>;
 
 			trips {
@@ -5125,8 +6234,6 @@
 		};
 
 		modem3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 13>;
 
 			trips {
@@ -5157,8 +6264,6 @@
 		};
 
 		camera0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 14>;
 
 			trips {
@@ -5177,8 +6282,6 @@
 		};
 
 		camera1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 15>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
new file mode 100644
index 000000000000..b5d7f0cd443a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
@@ -0,0 +1,1373 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8550 HDK";
+	compatible = "qcom,sm8550-hdk", "qcom,sm8550";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart7;
+		serial1 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_out: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&tlmm 159 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 160 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_ORANGE>;
+			gpios = <&tlmm 162 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	lt9611_1v2: regulator-lt9611-1v2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "LT9611_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		vin-supply = <&vph_pwr>;
+		gpio = <&tlmm 152 GPIO_ACTIVE_HIGH>;
+
+		enable-active-high;
+	};
+
+	lt9611_3v3: regulator-lt9611-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "LT9611_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vreg_bob_3v3>;
+		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+		enable-active-high;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_bob_3v3: regulator-vreg-bob-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_BOB_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	sound {
+		compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8550-HDK";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
+				"AMIC2", "MIC BIAS2",
+				"AMIC5", "MIC BIAS4",
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT1", "ADC4_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>;
+
+		wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s5g_0p85>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_s2g_0p85>;
+		vdddig-supply = <&vreg_s4e_0p95>;
+		vddrfa1p2-supply = <&vreg_s4g_1p25>;
+		vddrfa1p8-supply = <&vreg_s6g_1p86>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s4g_1p25>;
+		vdd-l12-supply = <&vreg_s6g_1p86>;
+		vdd-l15-supply = <&vreg_s6g_1p86>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		qcom,pmic-id = "c";
+
+		vreg_l3c_0p9: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* ldo2 supplies SM8550 VDD_LPI_MX */
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "e";
+
+		vreg_s4e_0p95: smps4 {
+			regulator-name = "vreg_s4e_0p95";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_1p08: smps5 {
+			regulator-name = "vreg_s5e_1p08";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p88: ldo1 {
+			regulator-name = "vreg_l1e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e_0p9: ldo2 {
+			regulator-name = "vreg_l2e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "f";
+
+		vreg_s4f_0p5: smps4 {
+			regulator-name = "vreg_s4f_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p9: ldo1 {
+			regulator-name = "vreg_l1f_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_0p88: ldo3 {
+			regulator-name = "vreg_l3f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "g";
+
+		vreg_s1g_1p25: smps1 {
+			regulator-name = "vreg_s1g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2g_0p85: smps2 {
+			regulator-name = "vreg_s2g_0p85";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_0p8: smps3 {
+			regulator-name = "vreg_s3g_0p8";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_1p25: smps4 {
+			regulator-name = "vreg_s4g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5g_0p85: smps5 {
+			regulator-name = "vreg_s5g_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6g_1p86: smps6 {
+			regulator-name = "vreg_s6g_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_1p2: ldo1 {
+			regulator-name = "vreg_l1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_s6g_1p86>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		qcom,pmic-id = "m";
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		qcom,pmic-id = "n";
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+
+		interrupts-extended = <&tlmm 8 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-0 = <&lt9611_irq_pin>, <&lt9611_rst_pin>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_connector_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c_hub_2 {
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		vcc-supply = <&vreg_bob1>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+};
+
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8550/ipa_fws.mbn";
+	status = "okay";
+};
+
+&iris {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8550/a740_zap.mbn";
+	};
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3e_1p2>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1e_0p88>;
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3c_0p9>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	vdda-qref-supply = <&vreg_l1e_0p88>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio12";
+		function = "normal";
+		input-enable;
+		output-disable;
+		bias-pull-up;
+		power-source = <1>; /* 1.8 V */
+	};
+
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+/* The RGB signals are routed to 3 separate LEDs on the HDK8550 */
+&pm8550_pwm {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	led@1 {
+		reg = <1>;
+		function = LED_FUNCTION_STATUS;
+		color = <LED_COLOR_ID_RED>;
+		default-state = "off";
+	};
+
+	led@2 {
+		reg = <2>;
+		function = LED_FUNCTION_STATUS;
+		color = <LED_COLOR_ID_GREEN>;
+		default-state = "off";
+	};
+
+	led@3 {
+		reg = <3>;
+		function = LED_FUNCTION_STATUS;
+		color = <LED_COLOR_ID_BLUE>;
+		default-state = "off";
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pmk8550_gpios {
+	pmk8550_sleep_clk: sleep-clk-state {
+		pins = "gpio3";
+		function = "func1";
+		input-disable;
+		output-enable;
+		bias-disable;
+		power-source = <0>;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/adsp.mbn",
+			"qcom/sm8550/adsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8550/cdsp.mbn",
+			"qcom/sm8550/cdsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8550/modem.mbn",
+			"qcom/sm8550/modem_dtb.mbn";
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker North */
+	north_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+
+		powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
+
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Speaker South */
+	south_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+
+		powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
+
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9385 RX Port 1 (HPH_L/R)      <=> SWR1 Port 1 (HPH_L/R)
+		 * WCD9385 RX Port 2 (CLSH)         <=> SWR1 Port 2 (CLSH)
+		 * WCD9385 RX Port 3 (COMP_L/R)     <=> SWR1 Port 3 (COMP_L/R)
+		 * WCD9385 RX Port 4 (LO)           <=> SWR1 Port 4 (LO)
+		 * WCD9385 RX Port 5 (DSD_L/R)      <=> SWR1 Port 5 (DSD_L/R)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9385 TX Port 1 (ADC1,2)             <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9385 TX Port 2 (ADC3,4)             <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9385 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+		 * WCD9385 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+		 */
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>;
+
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio81";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio82";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio8";
+		function = "gpio";
+		bias-disable;
+	};
+
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio7";
+		function = "gpio";
+		output-high;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio108";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio80";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vdd-hba-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1e_0p88>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3f_0p88>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 9a70875028b7..38f2928f23cc 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -10,6 +10,7 @@
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
 #include "pm8550ve.dtsi"
 #include "pm8550vs.dtsi"
 #include "pmk8550.dtsi"
@@ -105,14 +106,21 @@
 				"SpkrRight IN", "WSA_SPK2 OUT",
 				"IN1_HPHL", "HPHL_OUT",
 				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
 				"AMIC2", "MIC BIAS2",
+				"AMIC3", "MIC BIAS3",
+				"AMIC4", "MIC BIAS3",
+				"AMIC5", "MIC BIAS4",
 				"VA DMIC0", "MIC BIAS1",
 				"VA DMIC1", "MIC BIAS1",
 				"VA DMIC2", "MIC BIAS3",
 				"TX DMIC0", "MIC BIAS1",
 				"TX DMIC1", "MIC BIAS2",
 				"TX DMIC2", "MIC BIAS3",
-				"TX SWR_ADC1", "ADC2_OUTPUT";
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT0", "ADC3_OUTPUT",
+				"TX SWR_INPUT1", "ADC4_OUTPUT";
 
 		wcd-playback-dai-link {
 			link-name = "WCD Playback";
@@ -510,6 +518,134 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p8>;
+		vdd-l6-supply = <&vreg_s6g_1p8>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8550/a740_zap.mbn";
+	};
 };
 
 &i2c_master_hub_0 {
@@ -536,6 +672,10 @@
 	};
 };
 
+&iris {
+	status = "okay";
+};
+
 &lpass_tlmm {
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio17";
@@ -598,15 +738,6 @@
 	status = "okay";
 };
 
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
-};
-
-&pcie_1_phy_aux_clk {
-	clock-frequency = <1000>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -694,7 +825,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &swr0 {
@@ -711,6 +842,7 @@
 		sound-name-prefix = "SpkrLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3g_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
 	};
 
 	/* WSA8845 */
@@ -724,6 +856,7 @@
 		sound-name-prefix = "SpkrRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3g_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
 	};
 };
 
@@ -745,7 +878,7 @@
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		qcom,tx-port-mapping = <1 1 2 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
 	};
 };
 
@@ -815,19 +948,10 @@
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "otg";
-	usb-role-switch;
-};
-
 &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdd-supply = <&vreg_l1e_0p88>;
 	vdda12-supply = <&vreg_l3e_1p2>;
@@ -841,23 +965,13 @@
 	vdda-phy-supply = <&vreg_l3e_1p2>;
 	vdda-pll-supply = <&vreg_l3f_0p91>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
-&usb_dp_qmpphy_dp_in {
-	remote-endpoint = <&mdss_dp0_out>;
-};
-
 &usb_dp_qmpphy_out {
 	remote-endpoint = <&pmic_glink_ss_in>;
 };
 
-&usb_dp_qmpphy_usb_ss_in {
-	remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
 &xo_board {
 	clock-frequency = <76800000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index eef811def39b..a3f4200a1145 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -11,6 +11,7 @@
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
 #include "pm8550ve.dtsi"
 #include "pm8550vs.dtsi"
 #include "pmk8550.dtsi"
@@ -123,14 +124,21 @@
 				"SpkrRight IN", "WSA_SPK2 OUT",
 				"IN1_HPHL", "HPHL_OUT",
 				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
 				"AMIC2", "MIC BIAS2",
+				"AMIC3", "MIC BIAS3",
+				"AMIC4", "MIC BIAS3",
+				"AMIC5", "MIC BIAS4",
 				"VA DMIC0", "MIC BIAS1",
 				"VA DMIC1", "MIC BIAS1",
 				"VA DMIC2", "MIC BIAS3",
 				"TX DMIC0", "MIC BIAS1",
 				"TX DMIC1", "MIC BIAS2",
 				"TX DMIC2", "MIC BIAS3",
-				"TX SWR_ADC1", "ADC2_OUTPUT";
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT0", "ADC3_OUTPUT",
+				"TX SWR_INPUT1", "ADC4_OUTPUT";
 
 		wcd-playback-dai-link {
 			link-name = "WCD Playback";
@@ -206,6 +214,65 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>;
+
+		wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s5g_0p85>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_s2g_0p85>;
+		vdddig-supply = <&vreg_s4e_0p95>;
+		vddrfa1p2-supply = <&vreg_s4g_1p25>;
+		vddrfa1p8-supply = <&vreg_s6g_1p86>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -527,6 +594,126 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_s6g_1p86>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &i2c_master_hub_0 {
@@ -585,15 +772,27 @@
 	};
 };
 
-&gcc {
-	clocks = <&bi_tcxo_div2>, <&sleep_clk>,
-		 <&pcie0_phy>,
-		 <&pcie1_phy>,
-		 <0>,
-		 <&ufs_mem_phy 0>,
-		 <&ufs_mem_phy 1>,
-		 <&ufs_mem_phy 2>,
-		 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8550/ipa_fws.mbn";
+	status = "okay";
+};
+
+&iris {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8550/a740_zap.mbn";
+	};
 };
 
 &lpass_tlmm {
@@ -658,15 +857,6 @@
 	status = "okay";
 };
 
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
-};
-
-&pcie_1_phy_aux_clk {
-	status = "disabled";
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -677,6 +867,23 @@
 	status = "okay";
 };
 
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l1e_0p88>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
@@ -760,8 +967,15 @@
 	status = "okay";
 };
 
-&pcie_1_phy_aux_clk {
-	clock-frequency = <1000>;
+&pmk8550_gpios {
+	pmk8550_sleep_clk: sleep-clk-state {
+		pins = "gpio3";
+		function = "func1";
+		input-disable;
+		output-enable;
+		bias-disable;
+		power-source = <0>;
+	};
 };
 
 &qupv3_id_0 {
@@ -791,7 +1005,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &swr0 {
@@ -808,6 +1022,7 @@
 		sound-name-prefix = "SpkrLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3g_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
 	};
 
 	/* WSA8845, Speaker South */
@@ -821,6 +1036,31 @@
 		sound-name-prefix = "SpkrRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3g_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&spi4 {
+	status = "okay";
+
+	touchscreen@0 {
+		compatible = "goodix,gt9916";
+		reg = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+
+		avdd-supply = <&vreg_l14b_3p2>;
+
+		spi-max-frequency = <1000000>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2400>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_irq>, <&ts_reset>;
 	};
 };
 
@@ -842,7 +1082,7 @@
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		qcom,tx-port-mapping = <1 1 2 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
 	};
 };
 
@@ -892,6 +1132,20 @@
 		bias-pull-down;
 	};
 
+	ts_irq: ts-irq-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset: ts-reset-state {
+		pins = "gpio24";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
 	wcd_default: wcd-reset-n-active-state {
 		pins = "gpio108";
 		function = "gpio";
@@ -899,6 +1153,13 @@
 		bias-disable;
 		output-low;
 	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio80";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
 };
 
 &uart7 {
@@ -911,20 +1172,15 @@
 	bluetooth {
 		compatible = "qcom,wcn7850-bt";
 
-		vddio-supply = <&vreg_l15b_1p8>;
-		vddaon-supply = <&vreg_s4e_0p95>;
-		vdddig-supply = <&vreg_s4e_0p95>;
-		vddrfa0p8-supply = <&vreg_s4e_0p95>;
-		vddrfa1p2-supply = <&vreg_s4g_1p25>;
-		vddrfa1p9-supply = <&vreg_s6g_1p86>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
 
 		max-speed = <3200000>;
-
-		enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
-		swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-0 = <&bt_default>;
-		pinctrl-names = "default";
 	};
 };
 
@@ -950,19 +1206,10 @@
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "otg";
-	usb-role-switch;
-};
-
 &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdd-supply = <&vreg_l1e_0p88>;
 	vdda12-supply = <&vreg_l3e_1p2>;
@@ -976,23 +1223,13 @@
 	vdda-phy-supply = <&vreg_l3e_1p2>;
 	vdda-pll-supply = <&vreg_l3f_0p88>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
-&usb_dp_qmpphy_dp_in {
-	remote-endpoint = <&mdss_dp0_out>;
-};
-
 &usb_dp_qmpphy_out {
 	remote-endpoint = <&redriver_ss_in>;
 };
 
-&usb_dp_qmpphy_usb_ss_in {
-	remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
 &xo_board {
 	clock-frequency = <76800000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
new file mode 100644
index 000000000000..b4ef40ae2cd9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Alexandru Marc Serdeliuc <serdeliuk@yahoo.com>
+ * Copyright (c) 2024, David Wronek <david@mainlining.org>
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8550.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+/delete-node/ &adspslpi_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mpss_dsm_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+	model = "Samsung Galaxy Z Fold5";
+	compatible = "samsung,q5q", "qcom,sm8550";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@b8000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			width = <2176>;
+			height = <1812>;
+			stride = <(2176 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		adspslpi_mem: adspslpi@9ea00000 {
+			reg = <0x0 0x9ea00000 0x0 0x59b4000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@9c900000 {
+			reg = <0 0x9c900000 0 0x2000000>;
+			no-map;
+		};
+
+		mpss_dsm_mem: mpss-dsm@d4d00000 {
+			reg = <0x0 0xd4d00000 0x0 0x3300000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b400000 {
+			reg = <0x0 0x8b400000 0x0 0xfc00000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs-region@d4a80000 {
+			reg = <0x0 0xd4a80000 0x0 0x280000>;
+			no-map;
+		};
+
+		/*
+		 * The bootloader will only keep display hardware enabled
+		 * if this memory region is named exactly 'splash_region'
+		 */
+		splash-region@b8000000 {
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			no-map;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l3c_0p91: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s4e_0p9: smps4 {
+			regulator-name = "vreg_s4e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_1p1: smps5 {
+			regulator-name = "vreg_s5e_1p1";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p88: ldo1 {
+			regulator-name = "vreg_l1e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e_0p9: ldo2 {
+			regulator-name = "vreg_l2e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vreg_s4f_0p5: smps4 {
+			regulator-name = "vreg_s4f_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p9: ldo1 {
+			regulator-name = "vreg_l1f_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_0p91: ldo3 {
+			regulator-name = "vreg_l3f_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vreg_s1g_1p2: smps1 {
+			regulator-name = "vreg_s1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2g_0p8: smps2 {
+			regulator-name = "vreg_s2g_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_0p7: smps3 {
+			regulator-name = "vreg_s3g_0p7";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_1p3: smps4 {
+			regulator-name = "vreg_s4g_1p3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5g_0p8: smps5 {
+			regulator-name = "vreg_s5g_0p8";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6g_1p8: smps6 {
+			regulator-name = "vreg_s6g_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_1p2: ldo1 {
+			regulator-name = "vreg_l1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2g_1p2: ldo2 {
+			regulator-name = "vreg_l2g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "disabled";
+};
+
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	status = "okay";
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/adsp.mbn",
+			"qcom/sm8550/adsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8550/cdsp.mbn",
+			"qcom/sm8550/cdsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8550/modem.mbn",
+			"qcom/sm8550/modem_dtb.mbn";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <36 4>, <50 2>;
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vdd-hba-supply = <&vreg_l3g_1p2>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
new file mode 100644
index 000000000000..d90dc7b37c4a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
@@ -0,0 +1,765 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/cs35l45.h>
+#include "sm8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+/* TODO: Only one SID of PMR735D seems accessible? */
+
+/delete-node/ &hwfence_shbuf;
+/delete-node/ &mpss_mem;
+/delete-node/ &rmtfs_mem;
+/ {
+	model = "Sony Xperia 1 V";
+	compatible = "sony,pdx234", "qcom,sm8550";
+	chassis-type = "handset";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c4 = &i2c4;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c16 = &i2c_hub_2;
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+		pinctrl-names = "default";
+
+		key-camera-focus {
+			label = "Camera Focus";
+			linux,code = <KEY_CAMERA_FOCUS>;
+			gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		mpss_mem: mpss-region@89800000 {
+			reg = <0x0 0x89800000 0x0 0x10800000>;
+			no-map;
+		};
+
+		splash@b8000000 {
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf-region@e6440000 {
+			reg = <0x0 0xe6440000 0x0 0x2dd000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f8b00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf8b00000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+
+		ramoops@ffd00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffd00000 0x0 0xc0000>;
+			console-size = <0x40000>;
+			record-size = <0x1000>;
+			pmsg-size = <0x40000>;
+			ecc-size = <16>;
+		};
+
+		rdtag-store-region@ffdc0000 {
+			reg = <0x0 0xffdc0000 0x0 0x40000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		pm8550_bob1: bob1 {
+			regulator-name = "pm8550_bob1";
+			regulator-min-microvolt = <3416000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver constraints */
+
+		pm8550_l1: ldo1 {
+			regulator-name = "pm8550_l1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l2: ldo2 {
+			regulator-name = "pm8550_l2";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 exists in cmd-db, but the board seems to crash on access */
+
+		pm8550_l5: ldo5 {
+			regulator-name = "pm8550_l5";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l6: ldo6 {
+			regulator-name = "pm8550_l6";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l7: ldo7 {
+			regulator-name = "pm8550_l7";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l8: ldo8 {
+			regulator-name = "pm8550_l8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l9: ldo9 {
+			regulator-name = "pm8550_l9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l10: ldo10 {
+			regulator-name = "pm8550_l10";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l11: ldo11 {
+			regulator-name = "pm8550_l11";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l12: ldo12 {
+			regulator-name = "pm8550_l12";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l13: ldo13 {
+			regulator-name = "pm8550_l13";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l14: ldo14 {
+			regulator-name = "pm8550_l14";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l15: ldo15 {
+			regulator-name = "pm8550_l15";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l16: ldo16 {
+			regulator-name = "pm8550_l16";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550_l17: ldo17 {
+			regulator-name = "pm8550_l17";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		pm8550vs_0_l1: ldo1 {
+			regulator-name = "pm8550vs_0_l1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_0_l3: ldo3 {
+			regulator-name = "pm8550vs_0_l3";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		pm8550vs_1_l1: ldo1 {
+			regulator-name = "pm8550vs_1_l1";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 exists in cmd-db, but the board seems to crash on access */
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		pm8550vs_2_s4: smps4 {
+			regulator-name = "pm8550vs_2_s4";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_2_s5: smps5 {
+			regulator-name = "pm8550vs_2_s5";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_2_l1: ldo1 {
+			regulator-name = "pm8550vs_2_l1";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_2_l2: ldo2 {
+			regulator-name = "pm8550vs_2_l2";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_2_l3: ldo3 {
+			regulator-name = "pm8550vs_2_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		pm8550ve_s4: smps4 {
+			regulator-name = "pm8550ve_s4";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550ve_l1: ldo1 {
+			regulator-name = "pm8550ve_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550ve_l2: ldo2 {
+			regulator-name = "pm8550ve_l2";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550ve_l3: ldo3 {
+			regulator-name = "pm8550ve_l3";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		pm8550vs_3_s1: smps1 {
+			regulator-name = "pm8550vs_3_s1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s2: smps2 {
+			regulator-name = "pm8550vs_3_s2";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s3: smps3 {
+			regulator-name = "pm8550vs_3_s3";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s4: smps4 {
+			regulator-name = "pm8550vs_3_s4";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s5: smps5 {
+			regulator-name = "pm8550vs_3_s5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_s6: smps6 {
+			regulator-name = "pm8550vs_3_s6";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_l1: ldo1 {
+			regulator-name = "pm8550vs_3_l1";
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_l2: ldo2 {
+			regulator-name = "pm8550vs_3_l2";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8550vs_3_l3: ldo3 {
+			regulator-name = "pm8550vs_3_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&i2c_hub_2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic@75 {
+		compatible = "dlg,slg51000";
+		reg = <0x75>;
+		dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&cam_pwr_a_cs>;
+		pinctrl-names = "default";
+
+		regulators {
+			slg51000_a_ldo1: ldo1 {
+				regulator-name = "slg51000_a_ldo1";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo2: ldo2 {
+				regulator-name = "slg51000_a_ldo2";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo3: ldo3 {
+				regulator-name = "slg51000_a_ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo4: ldo4 {
+				regulator-name = "slg51000_a_ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo5: ldo5 {
+				regulator-name = "slg51000_a_ldo5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo6: ldo6 {
+				regulator-name = "slg51000_a_ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo7: ldo7 {
+				regulator-name = "slg51000_a_ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+		};
+	};
+};
+
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	/* NXP NFC @ 28 */
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* LX Semi SW82907 touchscreen @ 28 */
+};
+
+&i2c10 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&i2c11 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	cs35l41_l: speaker-amp@30 {
+		compatible = "cirrus,cs35l45";
+		reg = <0x30>;
+		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
+		#sound-dai-cells = <1>;
+
+		cirrus,gpio-ctrl2 {
+			gpio-ctrl = <0x2>;
+		};
+	};
+
+	cs35l41_r: speaker-amp@31 {
+		compatible = "cirrus,cs35l45";
+		reg = <0x31>;
+		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
+		#sound-dai-cells = <1>;
+
+		cirrus,gpio-ctrl2 {
+			gpio-ctrl = <0x2>;
+		};
+	};
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&pm8550vs_2_l1>;
+	vdda-pll-supply = <&pm8550vs_2_l3>;
+
+	status = "okay";
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	vol_down_n: volume-down-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio12";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-down;
+		output-disable;
+		input-enable;
+	};
+};
+
+&pm8550b_gpios {
+	snapshot_n: snapshot-n-state {
+		pins = "gpio7";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8550vs_g_gpios {
+	cam_pwr_a_cs: cam-pwr-a-cs-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <0x01>;
+		drive-push-pull;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>;
+	qcom,tune-usb2-amplitude = /bits/ 8 <0xf>;
+	qcom,tune-usb2-preem = /bits/ 8 <0x7>;
+	vdd18-supply = <&pm8550_l15>;
+	vdd3-supply = <&pm8550_l5>;
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn",
+			"qcom/sm8550/Sony/yodo/adsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn",
+			"qcom/sm8550/Sony/yodo/cdsp_dtb.mbn";
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&pm8550_l9>;
+	vqmmc-supply = <&pm8550_l8>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 8>;
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&pm8550vs_2_l1>;
+	vdda12-supply = <&pm8550vs_2_l3>;
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&pm8550vs_2_l3>;
+	vdda-pll-supply = <&pm8550ve_l3>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 7b9ddde0b2c9..7724dba75db7 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2022, Linaro Limited
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
 #include <dt-bindings/clock/qcom,sm8550-camcc.h>
@@ -14,6 +15,7 @@
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -58,36 +60,31 @@
 			clock-mult = <1>;
 			clock-div = <2>;
 		};
-
-		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-		};
 	};
 
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a510";
 			reg = <0 0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-			power-domains = <&CPU_PD0>;
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			#cooling-cells = <2>;
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -95,185 +92,185 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a510";
 			reg = <0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_100>;
-			power-domains = <&CPU_PD1>;
+			next-level-cache = <&l2_100>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			#cooling-cells = <2>;
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a510";
 			reg = <0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			next-level-cache = <&L2_200>;
-			power-domains = <&CPU_PD2>;
+			next-level-cache = <&l2_200>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			#cooling-cells = <2>;
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a715";
 			reg = <0 0x300>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_300>;
-			power-domains = <&CPU_PD3>;
+			next-level-cache = <&l2_300>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			capacity-dmips-mhz = <1792>;
 			dynamic-power-coefficient = <270>;
 			#cooling-cells = <2>;
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a715";
 			reg = <0 0x400>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_400>;
-			power-domains = <&CPU_PD4>;
+			next-level-cache = <&l2_400>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			capacity-dmips-mhz = <1792>;
 			dynamic-power-coefficient = <270>;
 			#cooling-cells = <2>;
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a710";
 			reg = <0 0x500>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_500>;
-			power-domains = <&CPU_PD5>;
+			next-level-cache = <&l2_500>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			capacity-dmips-mhz = <1792>;
 			dynamic-power-coefficient = <270>;
 			#cooling-cells = <2>;
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a710";
 			reg = <0 0x600>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			next-level-cache = <&L2_600>;
-			power-domains = <&CPU_PD6>;
+			next-level-cache = <&l2_600>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			capacity-dmips-mhz = <1792>;
 			dynamic-power-coefficient = <270>;
 			#cooling-cells = <2>;
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "arm,cortex-x3";
 			reg = <0 0x700>;
 			clocks = <&cpufreq_hw 2>;
 			enable-method = "psci";
-			next-level-cache = <&L2_700>;
-			power-domains = <&CPU_PD7>;
+			next-level-cache = <&l2_700>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 2>;
 			capacity-dmips-mhz = <1894>;
 			dynamic-power-coefficient = <588>;
 			#cooling-cells = <2>;
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -281,42 +278,52 @@
 		idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <800>;
+				entry-latency-us = <550>;
 				exit-latency-us = <750>;
-				min-residency-us = <4090>;
+				min-residency-us = <6700>;
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
 				entry-latency-us = <600>;
-				exit-latency-us = <1550>;
-				min-residency-us = <4791>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			prime_cpu_sleep_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "goldplus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
 				local-timer-stop;
 			};
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			cluster_sleep_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
-				entry-latency-us = <1050>;
-				exit-latency-us = <2500>;
-				min-residency-us = <5309>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
 			};
 
-			CLUSTER_SLEEP_1: cluster-sleep-1 {
+			cluster_sleep_1: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c344>;
-				entry-latency-us = <2700>;
-				exit-latency-us = <3500>;
-				min-residency-us = <13959>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
 			};
 		};
 	};
@@ -324,7 +331,9 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8550", "qcom,scm";
-			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			qcom,dload-mode = <&tcsr 0x19000>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 		};
 	};
 
@@ -340,72 +349,129 @@
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_120mhz: opp-table-qup120mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_125mhz: opp-table-qup125mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
 	memory@a0000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
 		reg = <0 0xa0000000 0 0>;
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	pmu-a510 {
+		compatible = "arm,cortex-a510-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
+	};
+
+	pmu-a710 {
+		compatible = "arm,cortex-a710-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
+	};
+
+	pmu-a715 {
+		compatible = "arm,cortex-a715-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster2>;
+	};
+
+	pmu-x3 {
+		compatible = "arm,cortex-x3-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster3>;
 	};
 
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&prime_cpu_sleep_0>;
 		};
 
-		CLUSTER_PD: power-domain-cluster {
+		cluster_pd: power-domain-cluster {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
+			domain-idle-states = <&cluster_sleep_0>, <&cluster_sleep_1>;
 		};
 	};
 
@@ -765,8 +831,8 @@
 			#power-domain-cells = <1>;
 			clocks = <&bi_tcxo_div2>, <&sleep_clk>,
 				 <&pcie0_phy>,
-				 <&pcie1_phy>,
-				 <&pcie_1_phy_aux_clk>,
+				 <&pcie1_phy QMP_PCIE_PIPE_CLK>,
+				 <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>,
 				 <&ufs_mem_phy 0>,
 				 <&ufs_mem_phy 1>,
 				 <&ufs_mem_phy 2>,
@@ -776,7 +842,7 @@
 		ipcc: mailbox@408000 {
 			compatible = "qcom,sm8550-ipcc", "qcom,ipcc";
 			reg = <0 0x00408000 0 0x1000>;
-			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#mbox-cells = <2>;
@@ -786,21 +852,22 @@
 			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x00800000 0 0x60000>;
-			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH 0>;
 			dma-channels = <12>;
 			dma-channel-mask = <0x3e>;
 			iommus = <&apps_smmu 0x436 0>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -812,6 +879,7 @@
 			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
 				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
 			iommus = <&apps_smmu 0x423 0>;
+			dma-coherent;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			status = "disabled";
@@ -823,16 +891,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c8_data_clk>;
-				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -841,16 +914,21 @@
 				reg = <0 0x00880000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
-				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -863,16 +941,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c9_data_clk>;
-				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -881,16 +964,21 @@
 				reg = <0 0x00884000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
-				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -903,16 +991,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c10_data_clk>;
-				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -921,16 +1014,21 @@
 				reg = <0 0x00888000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
-				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -943,16 +1041,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c11_data_clk>;
-				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -961,16 +1064,21 @@
 				reg = <0 0x0088c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
-				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -983,16 +1091,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c12_data_clk>;
-				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1001,16 +1114,21 @@
 				reg = <0 0x00890000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
-				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1023,16 +1141,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c13_data_clk>;
-				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1041,16 +1164,21 @@
 				reg = <0 0x00894000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
-				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1063,10 +1191,14 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
-				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_125mhz>;
 				status = "disabled";
 			};
 
@@ -1077,16 +1209,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c15_data_clk>;
-				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1095,16 +1232,21 @@
 				reg = <0 0x0089c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
-				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1129,12 +1271,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c0_data_clk>;
-				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1146,12 +1292,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c1_data_clk>;
-				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1163,12 +1313,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c2_data_clk>;
-				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1180,12 +1334,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c3_data_clk>;
-				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1197,12 +1355,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c4_data_clk>;
-				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1214,12 +1376,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c5_data_clk>;
-				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1231,12 +1397,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c6_data_clk>;
-				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1248,12 +1418,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c7_data_clk>;
-				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1265,12 +1439,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c8_data_clk>;
-				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1282,12 +1460,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c9_data_clk>;
-				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 		};
@@ -1296,21 +1478,22 @@
 			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x00a00000 0 0x60000>;
-			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
 			dma-channels = <12>;
 			dma-channel-mask = <0x1e>;
 			iommus = <&apps_smmu 0xb6 0>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -1322,8 +1505,10 @@
 			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
 				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
 			iommus = <&apps_smmu 0xa3 0>;
-			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>;
 			interconnect-names = "qup-core";
+			dma-coherent;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			status = "disabled";
@@ -1335,16 +1520,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c0_data_clk>;
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1353,16 +1543,21 @@
 				reg = <0 0x00a80000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1375,16 +1570,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c1_data_clk>;
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1393,16 +1593,21 @@
 				reg = <0 0x00a84000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1415,16 +1620,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c2_data_clk>;
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1433,16 +1643,21 @@
 				reg = <0 0x00a88000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1455,16 +1670,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c3_data_clk>;
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1473,16 +1693,21 @@
 				reg = <0 0x00a8c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1495,16 +1720,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c4_data_clk>;
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1513,16 +1743,21 @@
 				reg = <0 0x00a90000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1535,14 +1770,19 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c5_data_clk>;
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1553,16 +1793,21 @@
 				reg = <0 0x00a94000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1575,14 +1820,19 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c6_data_clk>;
-				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1593,16 +1843,21 @@
 				reg = <0 0x00a98000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
-				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1615,10 +1870,14 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_default>;
-				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH 0>;
 				interconnect-names = "qup-core", "qup-config";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 		};
@@ -1677,7 +1936,12 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8550-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pcie@1c00000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0 0x01c00000 0 0x3000>,
@@ -1697,15 +1961,30 @@
 			linux,pci-domain = <0>;
 			num-lanes = <2>;
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1722,10 +2001,14 @@
 				      "ddrss_sf_tbu",
 				      "noc_aggr";
 
-			interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
+			msi-map = <0x0 &gic_its 0x1400 0x1>,
+				  <0x100 &gic_its 0x1401 0x1>;
 			iommu-map = <0x0   &apps_smmu 0x1400 0x1>,
 				    <0x100 &apps_smmu 0x1401 0x1>;
 
@@ -1737,7 +2020,58 @@
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
+			operating-points-v2 = <&pcie0_opp_table>;
+
 			status = "disabled";
+
+			pcie0_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+			};
+
+			pcieport0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -1768,7 +2102,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0x0 0x01c08000 0x0 0x3000>,
@@ -1788,15 +2122,30 @@
 			linux,pci-domain = <1>;
 			num-lanes = <2>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH 0>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -1818,10 +2167,14 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>;
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
+			msi-map = <0x0 &gic_its 0x1480 0x1>,
+				  <0x100 &gic_its 0x1481 0x1>;
 			iommu-map = <0x0   &apps_smmu 0x1480 0x1>,
 				    <0x100 &apps_smmu 0x1481 0x1>;
 
@@ -1834,7 +2187,65 @@
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
+			operating-points-v2 = <&pcie1_opp_table>;
+
 			status = "disabled";
+
+			pcie1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 and GEN 4 x1 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+				/* GEN 4 x2 */
+				opp-32000000 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+				};
+			};
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0e000 {
@@ -1858,7 +2269,7 @@
 
 			power-domains = <&gcc PCIE_1_PHY_GDSC>;
 
-			#clock-cells = <0>;
+			#clock-cells = <1>;
 			clock-output-names = "pcie1_pipe_clk";
 
 			#phy-cells = <0>;
@@ -1869,9 +2280,11 @@
 		cryptobam: dma-controller@1dc4000 {
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			reg = <0x0 0x01dc4000 0x0 0x28000>;
-			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x480 0x0>,
 				 <&apps_smmu 0x481 0x0>;
@@ -1884,16 +2297,20 @@
 			dma-names = "rx", "tx";
 			iommus = <&apps_smmu 0x480 0x0>,
 				 <&apps_smmu 0x481 0x0>;
-			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 			interconnect-names = "memory";
 		};
 
 		ufs_mem_phy: phy@1d80000 {
 			compatible = "qcom,sm8550-qmp-ufs-phy";
 			reg = <0x0 0x01d80000 0x0 0x2000>;
-			clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-			clock-names = "ref", "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&tcsr TCSR_UFS_CLKREF_EN>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 
 			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
 
@@ -1906,11 +2323,11 @@
 			status = "disabled";
 		};
 
-		ufs_mem_hc: ufs@1d84000 {
+		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8550-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
@@ -1924,8 +2341,11 @@
 			iommus = <&apps_smmu 0x60 0x0>;
 			dma-coherent;
 
-			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+			operating-points-v2 = <&ufs_opp_table>;
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 			clock-names = "core_clk",
@@ -1944,24 +2364,56 @@
 				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-			freq-table-hz =
-				<75000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>,
-				<100000000 403000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
 			qcom,ice = <&ice>;
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-75000000 {
+					opp-hz = /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-150000000 {
+					opp-hz = /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ice: crypto@1d88000 {
 			compatible = "qcom,sm8550-inline-crypto-engine",
 				     "qcom,inline-crypto-engine";
-			reg = <0 0x01d88000 0 0x8000>;
+			reg = <0 0x01d88000 0 0x18000>;
+
 			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
 		};
 
@@ -1979,6 +2431,141 @@
 			#reset-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-43050a01", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			iommus = <&adreno_smmu 0 0x0>,
+				 <&adreno_smmu 1 0x0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
+
+			interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "gfx-mem";
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			/* Speedbin needs more work on A740+, keep only lower freqs */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-680000000 {
+					opp-hz = /bits/ 64 <680000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <16500000>;
+				};
+
+				opp-615000000 {
+					opp-hz = /bits/ 64 <615000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					opp-peak-kBps = <12449218>;
+				};
+
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <10687500>;
+				};
+
+				opp-475000000 {
+					opp-hz = /bits/ 64 <475000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					opp-peak-kBps = <6074218>;
+				};
+
+				opp-401000000 {
+					opp-hz = /bits/ 64 <401000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <6074218>;
+				};
+
+				opp-348000000 {
+					opp-hz = /bits/ 64 <348000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					opp-peak-kBps = <6074218>;
+				};
+
+				opp-295000000 {
+					opp-hz = /bits/ 64 <295000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					opp-peak-kBps = <6074218>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					opp-peak-kBps = <2136718>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-740.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b280000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x0>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,sm8550-gpucc";
 			reg = <0 0x03d90000 0 0xa000>;
@@ -1990,11 +2577,96 @@
 			#power-domain-cells = <1>;
 		};
 
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8550-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING 0>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IPA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8550-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING 0>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2010,7 +2682,8 @@
 					<&rpmhpd RPMHPD_MSS>;
 			power-domain-names = "cx", "mss";
 
-			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 
 			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, <&mpss_dsm_mem>;
 
@@ -2032,6 +2705,138 @@
 			};
 		};
 
+		remoteproc_adsp: remoteproc@6800000 {
+			compatible = "qcom,sm8550-adsp-pas";
+			reg = <0x0 0x06800000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1063 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1064 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1065 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1066 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x80>,
+							 <&apps_smmu 0x1067 0x0>;
+						dma-coherent;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
 		lpass_wsa2macro: codec@6aa0000 {
 			compatible = "qcom,sm8550-lpass-wsa-macro";
 			reg = <0 0x06aa0000 0 0x1000>;
@@ -2040,24 +2845,23 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "wsa2-mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa2_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr3: soundwire-controller@6ab0000 {
+		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
-			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_wsa2macro>;
 			clock-names = "iface";
 			label = "WSA2";
 
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2086,36 +2890,34 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@6ad0000 {
+		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_rxmacro>;
 			clock-names = "iface";
 			label = "RX";
 
-			qcom,din-ports = <0>;
-			qcom,dout-ports = <10>;
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <1>;
+			qcom,dout-ports = <11>;
 
-			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
 
 			#address-cells = <2>;
 			#size-cells = <0>;
@@ -2131,14 +2933,9 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
@@ -2151,24 +2948,22 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@6b10000 {
+		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_wsamacro>;
 			clock-names = "iface";
 			label = "WSA";
 
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2188,16 +2983,19 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@6d30000 {
+		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
-			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "core", "wakeup";
-			clocks = <&lpass_vamacro>;
+			clocks = <&lpass_txmacro>;
 			clock-names = "iface";
 			label = "TX";
 
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
 			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
@@ -2224,9 +3022,6 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "mclk", "macro", "dcodec";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
 			#sound-dai-cells = <1>;
@@ -2296,7 +3091,7 @@
 				};
 			};
 
-			dmic02_default: dmic02-default-state {
+			dmic23_default: dmic23-default-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
@@ -2374,8 +3169,8 @@
 			compatible = "qcom,sm8550-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
 
-			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "hc_irq", "pwr_irq";
 
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
@@ -2388,8 +3183,10 @@
 			power-domains = <&rpmhpd RPMHPD_CX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 
-			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "sdhc-ddr", "cpu-sdhc";
 			bus-width = <4>;
 			dma-coherent;
@@ -2424,18 +3221,403 @@
 			};
 		};
 
+		iris: video-codec@aa00000 {
+			compatible = "qcom,sm8550-iris";
+
+			reg = <0 0x0aa00000 0 0xf0000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+					<&videocc VIDEO_CC_MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_MMCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "mxc",
+					     "mmcx";
+			operating-points-v2 = <&iris_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg",
+					     "video-mem";
+
+			memory-region = <&video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+			reset-names = "bus";
+
+			iommus = <&apps_smmu 0x1940 0>,
+				 <&apps_smmu 0x1947 0>;
+			dma-coherent;
+
+			/*
+			 * IRIS firmware is signed by vendors, only
+			 * enable on boards where the proper signed firmware
+			 * is available.
+			 */
+			status = "disabled";
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_low_svs>;
+				};
+
+				opp-338000000 {
+					opp-hz = /bits/ 64 <338000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_svs>;
+				};
+
+				opp-366000000 {
+					opp-hz = /bits/ 64 <366000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>,
+							<&rpmhpd_opp_nom>;
+				};
+
+				opp-533333334 {
+					opp-hz = /bits/ 64 <533333334>;
+					required-opps = <&rpmhpd_opp_turbo>,
+							<&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
 		videocc: clock-controller@aaf0000 {
 			compatible = "qcom,sm8550-videocc";
 			reg = <0 0x0aaf0000 0 0x10000>;
 			clocks = <&bi_tcxo_div2>,
 				 <&gcc GCC_VIDEO_AHB_CLK>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
-			required-opps = <&rpmhpd_opp_low_svs>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac15000 {
+			compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac15000 0 0x1000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING 0>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+			pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac16000 {
+			compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac16000 0 0x1000>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING 0>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci1_0_default>;
+			pinctrl-1 = <&cci1_0_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci2: cci@ac17000 {
+			compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac17000 0 0x1000>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING 0>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_2_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+			pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci2_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci2_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: isp@acb7000 {
+			compatible = "qcom,sm8550-camss";
+
+			reg = <0x0 0x0acb7000 0x0 0x0d00>,
+			      <0x0 0x0acb9000 0x0 0x0d00>,
+			      <0x0 0x0acbb000 0x0 0x0d00>,
+			      <0x0 0x0acca000 0x0 0x0a00>,
+			      <0x0 0x0acce000 0x0 0x0a00>,
+			      <0x0 0x0acb6000 0x0 0x1000>,
+			      <0x0 0x0ace4000 0x0 0x2000>,
+			      <0x0 0x0ace6000 0x0 0x2000>,
+			      <0x0 0x0ace8000 0x0 0x2000>,
+			      <0x0 0x0acea000 0x0 0x2000>,
+			      <0x0 0x0acec000 0x0 0x2000>,
+			      <0x0 0x0acee000 0x0 0x2000>,
+			      <0x0 0x0acf0000 0x0 0x2000>,
+			      <0x0 0x0acf2000 0x0 0x2000>,
+			      <0x0 0x0ac62000 0x0 0xf000>,
+			      <0x0 0x0ac71000 0x0 0xf000>,
+			      <0x0 0x0ac80000 0x0 0xf000>,
+			      <0x0 0x0accb000 0x0 0x1800>,
+			      <0x0 0x0accf000 0x0 0x1800>;
+			reg-names = "csid0",
+				    "csid1",
+				    "csid2",
+				    "csid_lite0",
+				    "csid_lite1",
+				    "csid_wrapper",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "csiphy3",
+				    "csiphy4",
+				    "csiphy5",
+				    "csiphy6",
+				    "csiphy7",
+				    "vfe0",
+				    "vfe1",
+				    "vfe2",
+				    "vfe_lite0",
+				    "vfe_lite1";
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_2_CLK>,
+				 <&camcc CAM_CC_CSID_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY4_CLK>,
+				 <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY5_CLK>,
+				 <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY6_CLK>,
+				 <&camcc CAM_CC_CSI6PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY7_CLK>,
+				 <&camcc CAM_CC_CSI7PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_2_CLK>,
+				 <&camcc CAM_CC_IFE_2_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cpas_fast_ahb_clk",
+				      "cpas_ife_lite",
+				      "cpas_vfe0",
+				      "cpas_vfe1",
+				      "cpas_vfe2",
+				      "csid",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "csiphy4",
+				      "csiphy4_timer",
+				      "csiphy5",
+				      "csiphy5_timer",
+				      "csiphy6",
+				      "csiphy6_timer",
+				      "csiphy7",
+				      "csiphy7_timer",
+				      "csiphy_rx",
+				      "gcc_axi_hf",
+				      "vfe0",
+				      "vfe0_fast_ahb",
+				      "vfe1",
+				      "vfe1_fast_ahb",
+				      "vfe2",
+				      "vfe2_fast_ahb",
+				      "vfe_lite",
+				      "vfe_lite_ahb",
+				      "vfe_lite_cphy_rx",
+				      "vfe_lite_csid";
+
+			interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 603 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 431 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 605 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 376 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 122 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 89 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 278 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 277 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 602 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 604 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 688 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 606 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 377 IRQ_TYPE_EDGE_RISING 0>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid_lite0",
+					  "csid_lite1",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csiphy3",
+					  "csiphy4",
+					  "csiphy5",
+					  "csiphy6",
+					  "csiphy7",
+					  "vfe0",
+					  "vfe1",
+					  "vfe2",
+					  "vfe_lite0",
+					  "vfe_lite1";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ahb",
+					     "hf_0_mnoc";
+
+			iommus = <&apps_smmu 0x800 0x20>;
+
+			power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+					<&camcc CAM_CC_IFE_1_GDSC>,
+					<&camcc CAM_CC_IFE_2_GDSC>,
+					<&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "ife0",
+					     "ife1",
+					     "ife2",
+					     "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+
+				port@4 {
+					reg = <4>;
+				};
+
+				port@5 {
+					reg = <5>;
+				};
+
+				port@6 {
+					reg = <6>;
+				};
+
+				port@7 {
+					reg = <7>;
+				};
+			};
+		};
+
 		camcc: clock-controller@ade0000 {
 			compatible = "qcom,sm8550-camcc";
 			reg = <0 0x0ade0000 0 0x20000>;
@@ -2443,8 +3625,10 @@
 				 <&bi_tcxo_div2>,
 				 <&bi_tcxo_ao_div2>,
 				 <&sleep_clk>;
-			power-domains = <&rpmhpd SM8550_MMCX>;
-			required-opps = <&rpmhpd_opp_low_svs>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -2455,7 +3639,7 @@
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
 
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
@@ -2468,9 +3652,11 @@
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
-			interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
-					<&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem", "mdp1-mem";
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem", "cpu-cfg";
 
 			iommus = <&apps_smmu 0x1c00 0x2>;
 
@@ -2483,7 +3669,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8550-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				interrupt-parent = <&mdss>;
@@ -2573,16 +3759,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
@@ -2609,6 +3799,8 @@
 					port@1 {
 						reg = <1>;
 						mdss_dp0_out: endpoint {
+							data-lanes = <0 1 2 3>;
+							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
 						};
 					};
 				};
@@ -2663,8 +3855,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -2758,8 +3950,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -2817,10 +4009,10 @@
 				 <&bi_tcxo_ao_div2>,
 				 <&gcc GCC_DISP_AHB_CLK>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <0>, /* dp1 */
@@ -2868,6 +4060,9 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			mode-switch;
+			orientation-switch;
+
 			status = "disabled";
 
 			ports {
@@ -2885,6 +4080,7 @@
 					reg = <1>;
 
 					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
 					};
 				};
 
@@ -2892,17 +4088,17 @@
 					reg = <2>;
 
 					usb_dp_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
 					};
 				};
 			};
 		};
 
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,sm8550-dwc3", "qcom,dwc3";
-			reg = <0x0 0x0a6f8800 0x0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_1: usb@a600000 {
+			compatible = "qcom,sm8550-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a600000 0x0 0xfc100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -2921,54 +4117,70 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			required-opps = <&rpmhpd_opp_nom>;
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			status = "disabled";
+			iommus = <&apps_smmu 0x40 0x0>;
 
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x0a600000 0x0 0xcd00>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x40 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				snps,usb3_lpm_capable;
-				phys = <&usb_1_hsphy>,
-				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
-				phy-names = "usb2-phy", "usb3-phy";
+			phys = <&usb_1_hsphy>,
+			       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy", "usb3-phy";
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+			snps,hird-threshold = /bits/ 8 <0x0>;
+			snps,usb2-gadget-lpm-disable;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,is-utmi-l1-suspend;
+			snps,usb3_lpm_capable;
+			snps,usb2-lpm-disable;
+			snps,has-lpm-erratum;
+			tx-fifo-resize;
 
-					port@0 {
-						reg = <0>;
+			dma-coherent;
 
-						usb_1_dwc3_hs: endpoint {
-						};
+			usb-role-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_dwc3_hs: endpoint {
 					};
+				};
 
-					port@1 {
-						reg = <1>;
+				port@1 {
+					reg = <1>;
 
-						usb_1_dwc3_ss: endpoint {
-						};
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
 					};
 				};
 			};
@@ -2990,8 +4202,8 @@
 			reg = <0 0x0c271000 0 0x1000>, /* TM */
 			      <0 0x0c222000 0 0x1000>; /* SROT */
 			#qcom,sensors = <16>;
-			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -3001,8 +4213,8 @@
 			reg = <0 0x0c272000 0 0x1000>, /* TM */
 			      <0 0x0c223000 0 0x1000>; /* SROT */
 			#qcom,sensors = <16>;
-			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -3012,8 +4224,8 @@
 			reg = <0 0x0c273000 0 0x1000>, /* TM */
 			      <0 0x0c224000 0 0x1000>; /* SROT */
 			#qcom,sensors = <16>;
-			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -3032,12 +4244,13 @@
 		sram@c3f0000 {
 			compatible = "qcom,rpmh-stats";
 			reg = <0 0x0c3f0000 0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
 		};
 
 		spmi_bus: spmi@c400000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0 0x0c400000 0 0x3000>,
-			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c500000 0 0x400000>,
 			      <0 0x0c440000 0 0x80000>,
 			      <0 0x0c4c0000 0 0x20000>,
 			      <0 0x0c42d000 0 0x4000>;
@@ -3056,7 +4269,7 @@
 		tlmm: pinctrl@f100000 {
 			compatible = "qcom,sm8550-tlmm";
 			reg = <0 0x0f100000 0 0x300000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -3064,6 +4277,166 @@
 			gpio-ranges = <&tlmm 0 0 211>;
 			wakeup-parent = <&pdc>;
 
+			cci0_0_default: cci0-0-default-state {
+				sda-pins {
+					pins = "gpio110";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio111";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci0_0_sleep: cci0-0-sleep-state {
+				sda-pins {
+					pins = "gpio110";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio111";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci0_1_default: cci0-1-default-state {
+				sda-pins {
+					pins = "gpio112";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio113";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci0_1_sleep: cci0-1-sleep-state {
+				sda-pins {
+					pins = "gpio112";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio113";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_0_default: cci1-0-default-state {
+				sda-pins {
+					pins = "gpio114";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio115";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci1_0_sleep: cci1-0-sleep-state {
+				sda-pins {
+					pins = "gpio114";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio115";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_0_default: cci2-0-default-state {
+				sda-pins {
+					pins = "gpio74";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio75";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci2_0_sleep: cci2-0-sleep-state {
+				sda-pins {
+					pins = "gpio74";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio75";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_1_default: cci2-1-default-state {
+				sda-pins {
+					pins = "gpio0";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio1";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci2_1_sleep: cci2-1-sleep-state {
+				sda-pins {
+					pins = "gpio0";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio1";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
 			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
 				/* SDA, SCL */
 				pins = "gpio16", "gpio17";
@@ -3590,103 +4963,104 @@
 			reg = <0 0x15000000 0 0x100000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH 0>;
+			dma-coherent;
 		};
 
 		intc: interrupt-controller@17100000 {
@@ -3694,14 +5068,32 @@
 			reg = <0 0x17100000 0 0x10000>,		/* GICD */
 			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
 			ranges;
-			#interrupt-cells = <3>;
+			#interrupt-cells = <4>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
 			redistributor-stride = <0 0x40000>;
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu3 &cpu4>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu5 &cpu6>;
+				};
+
+				ppi_cluster3: interrupt-partition-3 {
+					affinity = <&cpu7>;
+				};
+			};
+
 			gic_its: msi-controller@17140000 {
 				compatible = "arm,gic-v3-its";
 				reg = <0 0x17140000 0 0x20000>;
@@ -3721,49 +5113,49 @@
 				reg = <0x17421000 0x1000>,
 				      <0x17422000 0x1000>;
 				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			frame@17423000 {
 				reg = <0x17423000 0x1000>;
 				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@17425000 {
 				reg = <0x17425000 0x1000>;
 				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@17427000 {
 				reg = <0x17427000 0x1000>;
 				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@17429000 {
 				reg = <0x17429000 0x1000>;
 				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@1742b000 {
 				reg = <0x1742b000 0x1000>;
 				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@1742d000 {
 				reg = <0x1742d000 0x1000>;
 				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 		};
@@ -3776,14 +5168,14 @@
 			      <0 0x17a20000 0 0x10000>,
 			      <0 0x17a30000 0 0x10000>;
 			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>;
 			qcom,tcs-offset = <0xd00>;
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
 					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
@@ -3875,9 +5267,9 @@
 			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
 			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
@@ -3886,8 +5278,9 @@
 		pmu@24091000 {
 			compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
 			reg = <0 0x24091000 0 0x1000>;
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
 
 			operating-points-v2 = <&llcc_bwmon_opp_table>;
 
@@ -3935,8 +5328,9 @@
 		pmu@240b6400 {
 			compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon";
 			reg = <0 0x240b6400 0 0x600>;
-			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH 0>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
 
 			operating-points-v2 = <&cpu_bwmon_opp_table>;
 
@@ -3982,138 +5376,15 @@
 			      <0 0x25200000 0 0x200000>,
 			      <0 0x25400000 0 0x200000>,
 			      <0 0x25600000 0 0x200000>,
-			      <0 0x25800000 0 0x200000>;
+			      <0 0x25800000 0 0x200000>,
+			      <0 0x25a00000 0 0x200000>;
 			reg-names = "llcc0_base",
 				    "llcc1_base",
 				    "llcc2_base",
 				    "llcc3_base",
-				    "llcc_broadcast_base";
-			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		remoteproc_adsp: remoteproc@30000000 {
-			compatible = "qcom,sm8550-adsp-pas";
-			reg = <0x0 0x30000000 0x0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
-
-			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			remoteproc_adsp_glink: glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1003 0x80>,
-							 <&apps_smmu 0x1063 0x0>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1004 0x80>,
-							 <&apps_smmu 0x1064 0x0>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1005 0x80>,
-							 <&apps_smmu 0x1065 0x0>;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-						iommus = <&apps_smmu 0x1006 0x80>,
-							 <&apps_smmu 0x1066 0x0>;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-						iommus = <&apps_smmu 0x1007 0x80>,
-							 <&apps_smmu 0x1067 0x0>;
-					};
-				};
-
-				gpr {
-					compatible = "qcom,gpr";
-					qcom,glink-channels = "adsp_apps";
-					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-					qcom,intents = <512 20>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					q6apm: service@1 {
-						compatible = "qcom,q6apm";
-						reg = <GPR_APM_MODULE_IID>;
-						#sound-dai-cells = <0>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6apmdai: dais {
-							compatible = "qcom,q6apm-dais";
-							iommus = <&apps_smmu 0x1001 0x80>,
-								 <&apps_smmu 0x1061 0x0>;
-						};
-
-						q6apmbedai: bedais {
-							compatible = "qcom,q6apm-lpass-dais";
-							#sound-dai-cells = <1>;
-						};
-					};
-
-					q6prm: service@2 {
-						compatible = "qcom,q6prm";
-						reg = <GPR_PRM_MODULE_IID>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6prmcc: clock-controller {
-							compatible = "qcom,q6prm-lpass-clocks";
-							#clock-cells = <2>;
-						};
-					};
-				};
-			};
+				    "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
 		nsp_noc: interconnect@320c0000 {
@@ -4125,9 +5396,9 @@
 
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,sm8550-cdsp-pas";
-			reg = <0x0 0x32300000 0x0 0x1400000>;
+			reg = <0x0 0x32300000 0x0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING 0>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -4143,7 +5414,8 @@
 					<&rpmhpd RPMHPD_NSP>;
 			power-domain-names = "cx", "mxc", "nsp";
 
-			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 
 			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>;
 
@@ -4168,6 +5440,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "cdsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -4177,6 +5450,7 @@
 						iommus = <&apps_smmu 0x1961 0x0>,
 							 <&apps_smmu 0x0c01 0x20>,
 							 <&apps_smmu 0x19c1 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@2 {
@@ -4185,6 +5459,7 @@
 						iommus = <&apps_smmu 0x1962 0x0>,
 							 <&apps_smmu 0x0c02 0x20>,
 							 <&apps_smmu 0x19c2 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@3 {
@@ -4193,6 +5468,7 @@
 						iommus = <&apps_smmu 0x1963 0x0>,
 							 <&apps_smmu 0x0c03 0x20>,
 							 <&apps_smmu 0x19c3 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@4 {
@@ -4201,6 +5477,7 @@
 						iommus = <&apps_smmu 0x1964 0x0>,
 							 <&apps_smmu 0x0c04 0x20>,
 							 <&apps_smmu 0x19c4 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@5 {
@@ -4209,6 +5486,7 @@
 						iommus = <&apps_smmu 0x1965 0x0>,
 							 <&apps_smmu 0x0c05 0x20>,
 							 <&apps_smmu 0x19c5 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@6 {
@@ -4217,6 +5495,7 @@
 						iommus = <&apps_smmu 0x1966 0x0>,
 							 <&apps_smmu 0x0c06 0x20>,
 							 <&apps_smmu 0x19c6 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@7 {
@@ -4225,6 +5504,7 @@
 						iommus = <&apps_smmu 0x1967 0x0>,
 							 <&apps_smmu 0x0c07 0x20>,
 							 <&apps_smmu 0x19c7 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@8 {
@@ -4233,6 +5513,7 @@
 						iommus = <&apps_smmu 0x1968 0x0>,
 							 <&apps_smmu 0x0c08 0x20>,
 							 <&apps_smmu 0x19c8 0x10>;
+						dma-coherent;
 					};
 
 					/* note: secure cb9 in downstream */
@@ -4243,8 +5524,6 @@
 
 	thermal-zones {
 		aoss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -4263,8 +5542,6 @@
 		};
 
 		cpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
@@ -4283,8 +5560,6 @@
 		};
 
 		cpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
@@ -4303,8 +5578,6 @@
 		};
 
 		cpuss2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
@@ -4323,8 +5596,6 @@
 		};
 
 		cpuss3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
@@ -4343,8 +5614,6 @@
 		};
 
 		cpu3-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
@@ -4369,8 +5638,6 @@
 		};
 
 		cpu3-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
@@ -4395,8 +5662,6 @@
 		};
 
 		cpu4-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
@@ -4421,8 +5686,6 @@
 		};
 
 		cpu4-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -4447,8 +5710,6 @@
 		};
 
 		cpu5-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
@@ -4473,8 +5734,6 @@
 		};
 
 		cpu5-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
@@ -4499,8 +5758,6 @@
 		};
 
 		cpu6-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
@@ -4525,8 +5782,6 @@
 		};
 
 		cpu6-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
@@ -4551,8 +5806,6 @@
 		};
 
 		cpu7-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
@@ -4577,8 +5830,6 @@
 		};
 
 		cpu7-middle-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 14>;
 
 			trips {
@@ -4603,8 +5854,6 @@
 		};
 
 		cpu7-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 15>;
 
 			trips {
@@ -4629,8 +5878,6 @@
 		};
 
 		aoss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 0>;
 
 			trips {
@@ -4649,8 +5896,6 @@
 		};
 
 		cpu0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
@@ -4675,8 +5920,6 @@
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
@@ -4701,8 +5944,6 @@
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
@@ -4728,7 +5969,7 @@
 
 		cdsp0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 4>;
 
 			trips {
@@ -4760,7 +6001,7 @@
 
 		cdsp1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 5>;
 
 			trips {
@@ -4792,7 +6033,7 @@
 
 		cdsp2-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 6>;
 
 			trips {
@@ -4824,7 +6065,7 @@
 
 		cdsp3-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 7>;
 
 			trips {
@@ -4855,8 +6096,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
@@ -4876,7 +6115,7 @@
 
 		mem-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
@@ -4901,8 +6140,6 @@
 		};
 
 		modem0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 10>;
 
 			trips {
@@ -4933,8 +6170,6 @@
 		};
 
 		modem1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 11>;
 
 			trips {
@@ -4965,8 +6200,6 @@
 		};
 
 		modem2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 12>;
 
 			trips {
@@ -4997,8 +6230,6 @@
 		};
 
 		modem3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 13>;
 
 			trips {
@@ -5029,8 +6260,6 @@
 		};
 
 		camera0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 14>;
 
 			trips {
@@ -5049,8 +6278,6 @@
 		};
 
 		camera1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 15>;
 
 			trips {
@@ -5069,8 +6296,6 @@
 		};
 
 		aoss2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens2 0>;
 
 			trips {
@@ -5090,256 +6315,264 @@
 
 		gpuss-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 1>;
 
-			trips {
-				thermal-engine-config {
-					temperature = <125000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpu0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				thermal-hal-config {
-					temperature = <125000>;
+			trips {
+				gpu0_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
 				};
 
-				gpu0_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 2>;
 
-			trips {
-				thermal-engine-config {
-					temperature = <125000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpu1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				thermal-hal-config {
-					temperature = <125000>;
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
 				};
 
-				gpu1_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-2-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 3>;
 
-			trips {
-				thermal-engine-config {
-					temperature = <125000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpu2_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				thermal-hal-config {
-					temperature = <125000>;
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
 				};
 
-				gpu2_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-3-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 4>;
 
-			trips {
-				thermal-engine-config {
-					temperature = <125000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpu3_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				thermal-hal-config {
-					temperature = <125000>;
+			trips {
+				gpu3_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
 				};
 
-				gpu3_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-4-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 5>;
 
-			trips {
-				thermal-engine-config {
-					temperature = <125000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpu4_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				thermal-hal-config {
-					temperature = <125000>;
+			trips {
+				gpu4_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
 				};
 
-				gpu4_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-5-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 6>;
 
-			trips {
-				thermal-engine-config {
-					temperature = <125000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpu5_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				thermal-hal-config {
-					temperature = <125000>;
+			trips {
+				gpu5_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
 				};
 
-				gpu5_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-6-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 7>;
 
-			trips {
-				thermal-engine-config {
-					temperature = <125000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpu6_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				thermal-hal-config {
-					temperature = <125000>;
+			trips {
+				gpu6_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
 				};
 
-				gpu6_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-7-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 8>;
 
-			trips {
-				thermal-engine-config {
-					temperature = <125000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpu7_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				thermal-hal-config {
-					temperature = <125000>;
+			trips {
+				gpu7_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
 				};
 
-				gpu7_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
@@ -5347,9 +6580,9 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso b/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso
new file mode 100644
index 000000000000..5a594d7311a7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+/*
+ * Display Card kit overlay
+ * This requires S5702 Switch 7 to be turned to OFF to route DSI0 to the display panel
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/plugin/;
+
+/* Disable HDMI bridge related nodes (mutually exclusive with the display card) */
+
+&i2c6 {
+	status = "disabled";
+};
+
+&lt9611_1v2 {
+	status = "disabled";
+};
+
+&lt9611_3v3 {
+	status = "disabled";
+};
+
+&vreg_bob_3v3 {
+	status = "disabled";
+};
+
+&lt9611_codec {
+	status = "disabled";
+};
+
+&mdss_dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+};
+
+&spi4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	touchscreen@0 {
+		compatible = "goodix,gt9916";
+		reg = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <162 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
+
+		avdd-supply = <&vreg_l14b_3p2>;
+
+		spi-max-frequency = <1000000>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2400>;
+
+		pinctrl-0 = <&ts_irq>, <&ts_reset>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync: mdp-vsync-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_irq: ts-irq-state {
+		pins = "gpio161";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-disable;
+	};
+
+	ts_reset: ts-reset-state {
+		pins = "gpio162";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
new file mode 100644
index 000000000000..87d7190dc991
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
@@ -0,0 +1,1337 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 HDK";
+	compatible = "qcom,sm8650-hdk", "qcom,sm8650";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart15;
+		serial1 = &uart14;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_out: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8550b_gpios 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_ORANGE>;
+			gpios = <&pm8550b_gpios 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&wcd_usbss_sbu_mux>;
+				    };
+				};
+			};
+		};
+	};
+
+	lt9611_1v2: regulator-lt9611-1v2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "LT9611_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		vin-supply = <&vph_pwr>;
+		gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>;
+
+		enable-active-high;
+	};
+
+	lt9611_3v3: regulator-lt9611-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "LT9611_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vreg_bob_3v3>;
+		gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>;
+
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8650-HDK";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
+				"AMIC2", "MIC BIAS2",
+				"AMIC5", "MIC BIAS4",
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT3", "ADC4_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_bob_3v3: regulator-vreg-bob-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_BOB_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	wcd939x: audio-codec {
+		compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en>, <&bt_default>;
+
+		wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s4i_0p85>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddio1p2-supply = <&vreg_l3c_1p2>;
+		vddaon-supply = <&vreg_s2c_0p8>;
+		vdddig-supply = <&vreg_s3c_0p9>;
+		vddrfa1p2-supply = <&vreg_s1c_1p2>;
+		vddrfa1p8-supply = <&vreg_s6c_1p8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6c_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p1: ldo1 {
+			regulator-name = "vreg_l1m_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_2p8: ldo6 {
+			regulator-name = "vreg_l6m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p96: ldo7 {
+			regulator-name = "vreg_l7m_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-l4-supply = <&vreg_s6c_1p8>;
+		vdd-l5-supply = <&vreg_bob2>;
+		vdd-l6-supply = <&vreg_bob2>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p056: ldo2 {
+			regulator-name = "vreg_l2n_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_1p8: ldo3 {
+			regulator-name = "vreg_l3n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_1p8: ldo4 {
+			regulator-name = "vreg_l4n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_2p8: ldo5 {
+			regulator-name = "vreg_l5n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_2p8: ldo6 {
+			regulator-name = "vreg_l6n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_3p3: ldo7 {
+			regulator-name = "vreg_l7n_3p3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c3 {
+       status = "okay";
+
+       wcd_usbss: typec-mux@e {
+		compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss";
+		reg = <0xe>;
+
+		vdd-supply = <&vreg_l15b_1p8>;
+		reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>;
+
+		mode-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				wcd_usbss_sbu_mux: endpoint {
+					remote-endpoint = <&pmic_glink_sbu>;
+				};
+			};
+		};
+       };
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+
+		interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-0 = <&lt9611_irq_pin>, <&lt9611_rst_pin>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_connector_out>;
+				};
+			};
+		};
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8650/ipa_fws.mbn";
+	status = "okay";
+};
+
+&iris {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8650/gen70900_zap.mbn";
+	};
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3e_0p9>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+	vdda-qref-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio12";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		output-disable;
+		power-source = <1>; /* 1.8 V */
+	};
+
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		power-source = <1>;
+	};
+};
+
+/* The RGB signals are routed to 3 separate LEDs on the HDK8650 */
+&pm8550_pwm {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	led@1 {
+		reg = <1>;
+		function = LED_FUNCTION_STATUS;
+		color = <LED_COLOR_ID_RED>;
+		default-state = "off";
+	};
+
+	led@2 {
+		reg = <2>;
+		function = LED_FUNCTION_STATUS;
+		color = <LED_COLOR_ID_GREEN>;
+		default-state = "off";
+	};
+
+	led@3 {
+		reg = <3>;
+		function = LED_FUNCTION_STATUS;
+		color = <LED_COLOR_ID_BLUE>;
+		default-state = "off";
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qup_i2c3_data_clk {
+	/* Use internal I2C pull-up */
+	bias-pull-up = <2200>;
+};
+
+&qupv3_id_0 {
+	iommus = <&apps_smmu 0xa3 0x3>;
+
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8650/adsp.mbn",
+			"qcom/sm8650/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8650/cdsp.mbn",
+			"qcom/sm8650/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8650/modem.mbn",
+			"qcom/sm8650/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
+
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker North */
+	north_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 1 (SPKR_L)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 2 (SPKR_L_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 3 (SPKR_L_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Speaker South */
+	south_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 4 (SPKR_R)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 5 (SPKR_R_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 6 (SPKR_R_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9395 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010e00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9395 RX Port 1 (HPH_L/R)      <=> SWR1 Port 1 (HPH_L/R)
+		 * WCD9395 RX Port 2 (CLSH)         <=> SWR1 Port 2 (CLSH)
+		 * WCD9395 RX Port 3 (COMP_L/R)     <=> SWR1 Port 3 (COMP_L/R)
+		 * WCD9395 RX Port 4 (LO)           <=> SWR1 Port 4 (LO)
+		 * WCD9395 RX Port 5 (DSD_L/R)      <=> SWR1 Port 5 (DSD_L/R)
+		 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5 9>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9395 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010e00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9395 TX Port 1 (ADC1,2,3,4)         <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1)   <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+		 * WCD9395 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+		 */
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio18";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio85";
+		function = "gpio";
+		bias-disable;
+	};
+
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio28";
+		function = "gpio";
+		output-high;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
+ * USB SS -> USB-C
+ */
+
+&usb_1 {
+	dr_mode = "otg";
+	usb-role-switch;
+
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
new file mode 100644
index 000000000000..c67bbace2743
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -0,0 +1,892 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 MTP";
+	compatible = "qcom,sm8650-mtp", "qcom,sm8650";
+
+	aliases {
+		serial0 = &uart15;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8650-MTP";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT";
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6c_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p1: ldo1 {
+			regulator-name = "vreg_l1m_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_2p8: ldo6 {
+			regulator-name = "vreg_l6m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p96: ldo7 {
+			regulator-name = "vreg_l7m_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-l4-supply = <&vreg_s6c_1p8>;
+		vdd-l5-supply = <&vreg_bob2>;
+		vdd-l6-supply = <&vreg_bob2>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p056: ldo2 {
+			regulator-name = "vreg_l2n_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_1p8: ldo3 {
+			regulator-name = "vreg_l3n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_1p8: ldo4 {
+			regulator-name = "vreg_l4n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_2p8: ldo5 {
+			regulator-name = "vreg_l5n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_2p8: ldo6 {
+			regulator-name = "vreg_l6n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_3p3: ldo7 {
+			regulator-name = "vreg_l7n_3p3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&iris {
+	status = "okay";
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3e_0p9>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+	vdda-qref-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio12";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		output-disable;
+		power-source = <1>; /* 1.8 V */
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8650/adsp.mbn",
+			"qcom/sm8650/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8650/cdsp.mbn",
+			"qcom/sm8650/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8650/modem.mbn",
+			"qcom/sm8650/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker Left */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 1 (SPKR_L)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 2 (SPKR_L_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 3 (SPKR_L_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Speaker Right */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 4 (SPKR_R)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 5 (SPKR_R_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 6 (SPKR_R_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_active: mdp-vsync-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_suspend: mdp-vsync-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C
+ * USB SS -> USB-C
+ */
+
+&usb_1 {
+	dr_mode = "otg";
+	usb-role-switch;
+
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
new file mode 100644
index 000000000000..9e790cf44804
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
@@ -0,0 +1,1320 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 QRD";
+	compatible = "qcom,sm8650-qrd", "qcom,sm8650";
+
+	aliases {
+		serial0 = &uart15;
+		serial1 = &uart14;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&redriver_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&wcd_usbss_sbu_mux>;
+				    };
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8650-QRD";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
+				"AMIC2", "MIC BIAS2",
+				"AMIC3", "MIC BIAS3",
+				"AMIC4", "MIC BIAS3",
+				"AMIC5", "MIC BIAS4",
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT2", "ADC3_OUTPUT",
+				"TX SWR_INPUT3", "ADC4_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	wcd939x: audio-codec {
+		compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			wcd_codec_headset_in: endpoint {
+				remote-endpoint = <&wcd_usbss_headset_out>;
+			};
+		};
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en>, <&bt_default>;
+
+		wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s4i_0p85>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddio1p2-supply = <&vreg_l3c_1p2>;
+		vddaon-supply = <&vreg_s2c_0p8>;
+		vdddig-supply = <&vreg_s3c_0p9>;
+		vddrfa1p2-supply = <&vreg_s1c_1p2>;
+		vddrfa1p8-supply = <&vreg_s6c_1p8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6c_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p1: ldo1 {
+			regulator-name = "vreg_l1m_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_2p8: ldo6 {
+			regulator-name = "vreg_l6m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p96: ldo7 {
+			regulator-name = "vreg_l7m_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-l4-supply = <&vreg_s6c_1p8>;
+		vdd-l5-supply = <&vreg_bob2>;
+		vdd-l6-supply = <&vreg_bob2>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p056: ldo2 {
+			regulator-name = "vreg_l2n_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_1p8: ldo3 {
+			regulator-name = "vreg_l3n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_1p8: ldo4 {
+			regulator-name = "vreg_l4n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_2p8: ldo5 {
+			regulator-name = "vreg_l5n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_2p8: ldo6 {
+			regulator-name = "vreg_l6n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_3p3: ldo7 {
+			regulator-name = "vreg_l7n_3p3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c3 {
+       status = "okay";
+
+       wcd_usbss: typec-mux@e {
+		compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss";
+		reg = <0xe>;
+
+		vdd-supply = <&vreg_l15b_1p8>;
+		reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>;
+
+		mode-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				wcd_usbss_sbu_mux: endpoint {
+					remote-endpoint = <&pmic_glink_sbu>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				wcd_usbss_headset_out: endpoint {
+					remote-endpoint = <&wcd_codec_headset_in>;
+				};
+			};
+		};
+       };
+};
+
+&i2c6 {
+	status = "okay";
+
+	typec-mux@1c {
+		compatible = "onnn,nb7vpq904m";
+		reg = <0x1c>;
+
+		vcc-supply = <&vreg_l15b_1p8>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_ss_in: endpoint {
+					data-lanes = <3 2 1 0>;
+					remote-endpoint = <&usb_dp_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8650/ipa_fws.mbn";
+	status = "okay";
+};
+
+&iris {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8650/gen70900_zap.mbn";
+	};
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		power-source = <1>;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qup_i2c3_data_clk {
+	/* Use internal I2C pull-up */
+	bias-pull-up = <2200>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8650/adsp.mbn",
+			"qcom/sm8650/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8650/cdsp.mbn",
+			"qcom/sm8650/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8650/modem.mbn",
+			"qcom/sm8650/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&spi4 {
+	status = "okay";
+
+	touchscreen@0 {
+		compatible = "goodix,gt9916";
+		reg = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <162 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
+
+		avdd-supply = <&vreg_l14b_3p2>;
+
+		spi-max-frequency = <1000000>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2400>;
+
+		pinctrl-0 = <&ts_irq>, <&ts_reset>;
+		pinctrl-names = "default";
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker Left */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 1 (SPKR_L)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 2 (SPKR_L_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 3 (SPKR_L_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Speaker Right */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 4 (SPKR_R)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 5 (SPKR_R_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 6 (SPKR_R_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9395 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010e00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9395 RX Port 1 (HPH_L/R)      <=> SWR1 Port 1 (HPH_L/R)
+		 * WCD9395 RX Port 2 (CLSH)         <=> SWR1 Port 2 (CLSH)
+		 * WCD9395 RX Port 3 (COMP_L/R)     <=> SWR1 Port 3 (COMP_L/R)
+		 * WCD9395 RX Port 4 (LO)           <=> SWR1 Port 4 (LO)
+		 * WCD9395 RX Port 5 (DSD_L/R)      <=> SWR1 Port 5 (DSD_L/R)
+		 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5 9>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9395 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010e00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9395 TX Port 1 (ADC1,2,3,4)         <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1)   <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+		 * WCD9395 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+		 */
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio18";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_active: mdp-vsync-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_suspend: mdp-vsync-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	ts_irq: ts-irq-state {
+		pins = "gpio161";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-disable;
+	};
+
+	ts_reset: ts-reset-state {
+		pins = "gpio162";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
+ * USB SS -> NB7VPQ904MMUTWG -> USB-C
+ */
+
+&usb_1 {
+	dr_mode = "otg";
+	usb-role-switch;
+
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&redriver_ss_in>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
new file mode 100644
index 000000000000..ebf1971b1bfb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -0,0 +1,8257 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8650-camcc.h>
+#include <dt-bindings/clock/qcom,sm8650-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8650-tcsr.h>
+#include <dt-bindings/clock/qcom,sm8650-videocc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sm8650-gpucc.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
+			#cooling-cells = <2>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+
+				l3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0x100>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x200>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&l2_200>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			operating-points-v2 = <&cpu2_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
+			#cooling-cells = <2>;
+
+			l2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x300>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&l2_300>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			operating-points-v2 = <&cpu2_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
+			#cooling-cells = <2>;
+
+			l2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x400>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&cpu_pd4>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&l2_400>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			operating-points-v2 = <&cpu2_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
+			#cooling-cells = <2>;
+
+			l2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x500>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&cpu_pd5>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&l2_500>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			operating-points-v2 = <&cpu5_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
+			#cooling-cells = <2>;
+
+			l2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x600>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&cpu_pd6>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&l2_600>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			operating-points-v2 = <&cpu5_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
+			#cooling-cells = <2>;
+
+			l2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x4";
+			reg = <0 0x700>;
+
+			clocks = <&cpufreq_hw 2>;
+
+			power-domains = <&cpu_pd7>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&l2_700>;
+			capacity-dmips-mhz = <1894>;
+			dynamic-power-coefficient = <588>;
+
+			qcom,freq-domain = <&cpufreq_hw 2>;
+
+			operating-points-v2 = <&cpu7_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
+			#cooling-cells = <2>;
+
+			l2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			silver_cpu_sleep_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <550>;
+				exit-latency-us = <750>;
+				min-residency-us = <6700>;
+				local-timer-stop;
+			};
+
+			gold_cpu_sleep_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			gold_plus_cpu_sleep_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-plus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			cluster_sleep_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
+			};
+
+			cluster_sleep_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
+			};
+		};
+	};
+
+	ete-0 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu0>;
+
+		out-ports {
+			port {
+				ete0_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete0>;
+				};
+			};
+		};
+	};
+
+	ete-1 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu1>;
+
+		out-ports {
+			port {
+				ete1_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete1>;
+				};
+			};
+		};
+	};
+
+	ete-2 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu2>;
+
+		out-ports {
+			port {
+				ete2_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete2>;
+				};
+			};
+		};
+	};
+
+	ete-3 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu3>;
+
+		out-ports {
+			port {
+				ete3_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete3>;
+				};
+			};
+		};
+	};
+
+	ete-4 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu4>;
+
+		out-ports {
+			port {
+				ete4_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete4>;
+				};
+			};
+		};
+	};
+
+	ete-5 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu5>;
+
+		out-ports {
+			port {
+				ete5_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete5>;
+				};
+			};
+		};
+	};
+
+	ete-6 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu6>;
+
+		out-ports {
+			port {
+				ete6_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete6>;
+				};
+			};
+		};
+	};
+
+	ete-7 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu7>;
+
+		out-ports {
+			port {
+				ete7_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete7>;
+				};
+			};
+		};
+	};
+
+	funnel-ete {
+		compatible = "arm,coresight-static-funnel";
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				funnel_ete_in_ete0: endpoint {
+					remote-endpoint = <&ete0_out_funnel_ete>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				funnel_ete_in_ete1: endpoint {
+					remote-endpoint = <&ete1_out_funnel_ete>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				funnel_ete_in_ete2: endpoint {
+					remote-endpoint = <&ete2_out_funnel_ete>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				funnel_ete_in_ete3: endpoint {
+					remote-endpoint = <&ete3_out_funnel_ete>;
+				};
+			};
+
+			port@4 {
+				reg = <4>;
+
+				funnel_ete_in_ete4: endpoint {
+					remote-endpoint = <&ete4_out_funnel_ete>;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+
+				funnel_ete_in_ete5: endpoint {
+					remote-endpoint = <&ete5_out_funnel_ete>;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+
+				funnel_ete_in_ete6: endpoint {
+					remote-endpoint = <&ete6_out_funnel_ete>;
+				};
+			};
+
+			port@7 {
+				reg = <7>;
+
+				funnel_ete_in_ete7: endpoint {
+					remote-endpoint = <&ete7_out_funnel_ete>;
+				};
+			};
+		};
+
+		out-ports {
+			port {
+				funnel_ete_out_funnel_apss: endpoint {
+					remote-endpoint = <&funnel_apss_in_funnel_ete>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8650", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x19000>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sm8650-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sm8650-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_120mhz: opp-table-qup120mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_128mhz: opp-table-qup128mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_240mhz: opp-table-qup240mhz {
+		compatible = "operating-points-v2";
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0xa0000000 0 0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-364800000 {
+			opp-hz = /bits/ 64 <364800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (384000 * 32)>;
+		};
+
+		opp-556800000 {
+			opp-hz = /bits/ 64 <556800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-672000000 {
+			opp-hz = /bits/ 64 <672000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-787200000 {
+			opp-hz = /bits/ 64 <787200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (729600 * 32)>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (844800 * 32)>;
+		};
+
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(466000 * 16) (547000 * 4) (940800 * 32)>;
+		};
+
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <(466000 * 16) (547000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1132800 * 32)>;
+		};
+
+		opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1689600000 {
+			opp-hz = /bits/ 64 <1689600000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1555200 * 32)>;
+		};
+
+		opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1555200 * 32)>;
+		};
+
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1651200 * 32)>;
+		};
+
+		opp-1939200000 {
+			opp-hz = /bits/ 64 <1939200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2265600000 {
+			opp-hz = /bits/ 64 <2265600000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (2035200 * 32)>;
+		};
+	};
+
+	cpu2_opp_table: opp-table-cpu2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (844800 * 32)>;
+		};
+
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2304000000 {
+			opp-hz = /bits/ 64 <2304000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2438400000 {
+			opp-hz = /bits/ 64 <2438400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2515200000 {
+			opp-hz = /bits/ 64 <2515200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2572800000 {
+			opp-hz = /bits/ 64 <2572800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2630400000 {
+			opp-hz = /bits/ 64 <2630400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2707200000 {
+			opp-hz = /bits/ 64 <2707200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2764800000 {
+			opp-hz = /bits/ 64 <2764800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2841600000 {
+			opp-hz = /bits/ 64 <2841600000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2899200000 {
+			opp-hz = /bits/ 64 <2899200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2956800000 {
+			opp-hz = /bits/ 64 <2956800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3014400000 {
+			opp-hz = /bits/ 64 <3014400000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3072000000 {
+			opp-hz = /bits/ 64 <3072000000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3148800000 {
+			opp-hz = /bits/ 64 <3148800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (2035200 * 32)>;
+		};
+	};
+
+	cpu5_opp_table: opp-table-cpu5 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (844800 * 32)>;
+		};
+
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2304000000 {
+			opp-hz = /bits/ 64 <2304000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2438400000 {
+			opp-hz = /bits/ 64 <2438400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2515200000 {
+			opp-hz = /bits/ 64 <2515200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2572800000 {
+			opp-hz = /bits/ 64 <2572800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2630400000 {
+			opp-hz = /bits/ 64 <2630400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2707200000 {
+			opp-hz = /bits/ 64 <2707200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2764800000 {
+			opp-hz = /bits/ 64 <2764800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2841600000 {
+			opp-hz = /bits/ 64 <2841600000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2899200000 {
+			opp-hz = /bits/ 64 <2899200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2956800000 {
+			opp-hz = /bits/ 64 <2956800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3014400000 {
+			opp-hz = /bits/ 64 <3014400000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3072000000 {
+			opp-hz = /bits/ 64 <3072000000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3148800000 {
+			opp-hz = /bits/ 64 <3148800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (2035200 * 32)>;
+		};
+	};
+
+	cpu7_opp_table: opp-table-cpu7 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-672000000 {
+			opp-hz = /bits/ 64 <672000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-787200000 {
+			opp-hz = /bits/ 64 <787200000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1305600000 {
+			opp-hz = /bits/ 64 <1305600000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1939200000 {
+			opp-hz = /bits/ 64 <1939200000>;
+			opp-peak-kBps = <(806000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2304000000 {
+			opp-hz = /bits/ 64 <2304000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2438400000 {
+			opp-hz = /bits/ 64 <2438400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2457600000 {
+			opp-hz = /bits/ 64 <2457600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2496000000 {
+			opp-hz = /bits/ 64 <2496000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2630400000 {
+			opp-hz = /bits/ 64 <2630400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2688000000 {
+			opp-hz = /bits/ 64 <2688000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2803200000 {
+			opp-hz = /bits/ 64 <2803200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2880000000 {
+			opp-hz = /bits/ 64 <2880000000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2937600000 {
+			opp-hz = /bits/ 64 <2937600000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2995200000 {
+			opp-hz = /bits/ 64 <2995200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3052800000 {
+			opp-hz = /bits/ 64 <3052800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3187200000 {
+			opp-hz = /bits/ 64 <3187200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (2035200 * 32)>;
+		};
+
+		opp-3302400000 {
+			opp-hz = /bits/ 64 <3302400000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (2035200 * 32)>;
+		};
+	};
+
+	pmu-a520 {
+		compatible = "arm,cortex-a520-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
+	};
+
+	pmu-a720 {
+		compatible = "arm,cortex-a720-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
+	};
+
+	pmu-x4 {
+		compatible = "arm,cortex-x4-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster2>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&silver_cpu_sleep_0>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&silver_cpu_sleep_0>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>;
+		};
+
+		cpu_pd4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>;
+		};
+
+		cpu_pd5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>;
+		};
+
+		cpu_pd6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>;
+		};
+
+		cpu_pd7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_plus_cpu_sleep_0>;
+		};
+
+		cluster_pd: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_0>,
+					     <&cluster_sleep_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@80000000 {
+			reg = <0 0x80000000 0 0xe00000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm@80e00000 {
+			reg = <0 0x80e00000 0 0x400000>;
+			no-map;
+		};
+
+		/* Merged xbl_dtlog, xbl_ramdump and aop_image regions */
+		xbl_dt_log_merged_mem: xbl-dt-log-merged@81a00000 {
+			reg = <0 0x81a00000 0 0x260000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x81c60000 0 0x20000>;
+			no-map;
+		};
+
+		/* Merged aop_config, tme_crash_dump, tme_log, uefi_log, and chipinfo regions */
+		aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 {
+			reg = <0 0x81c80000 0 0x75000>;
+			no-map;
+		};
+
+		/* Secdata region can be reused by apps */
+
+		smem: smem@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0 0x81d00000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi@81f00000 {
+			reg = <0 0x81f00000 0 0x20000>;
+			no-map;
+		};
+
+		pvmfw_mem: pvmfw@824a0000 {
+			reg = <0 0x824a0000 0 0x100000>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync@82600000 {
+			reg = <0 0x82600000 0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0 0x82700000 0 0x100000>;
+			no-map;
+		};
+
+		qdss_mem: qdss@82800000 {
+			reg = <0 0x82800000 0 0x2000000>;
+			no-map;
+		};
+
+		qlink_logging_mem: qlink-logging@84800000 {
+			reg = <0 0x84800000 0 0x200000>;
+			no-map;
+		};
+
+		mpss_dsm_mem: mpss-dsm@86b00000 {
+			reg = <0 0x86b00000 0 0x4900000>;
+			no-map;
+		};
+
+		mpss_dsm_mem_2: mpss-dsm-2@8b400000 {
+			reg = <0 0x8b400000 0 0x800000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8bc00000 {
+			reg = <0 0x8bc00000 0 0xf400000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 {
+			reg = <0 0x9b000000 0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@9b080000 {
+			reg = <0 0x9b080000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@9b090000 {
+			reg = <0 0x9b090000 0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code@9b09a000 {
+			reg = <0 0x9b09a000 0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss@9b0a0000 {
+			reg = <0 0x9b0a0000 0 0x1e0000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: spu-tz-shared@9b280000 {
+			reg = <0 0x9b280000 0 0x60000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: spu-modem-shared@9b2e0000 {
+			reg = <0 0x9b2e0000 0 0x20000>;
+			no-map;
+		};
+
+		camera_mem: camera@9b300000 {
+			reg = <0 0x9b300000 0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video@9bb00000 {
+			reg = <0 0x9bb00000 0 0x800000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@9c300000 {
+			reg = <0 0x9c300000 0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@9ca00000 {
+			reg = <0 0x9ca00000 0 0x1400000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@9de00000 {
+			reg = <0 0x9de00000 0 0x80000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@9de80000 {
+			reg = <0 0x9de80000 0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@9df00000 {
+			reg = <0 0x9df00000 0 0x4080000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@d7c00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xd7c00000 0 0x400000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+
+		/* Merged tz_reserved, xbl_sc, cpucp_fw and qtee regions */
+		tz_merged_mem: tz-merged@d8000000 {
+			reg = <0 0xd8000000 0 0x800000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf@e6440000 {
+			reg = <0 0xe6440000 0 0x2dd000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: trust-ui-vm@f3800000 {
+			reg = <0 0xf3800000 0 0x4400000>;
+			no-map;
+		};
+
+		oem_vm_mem: oem-vm@f7c00000 {
+			reg = <0 0xf7c00000 0 0x4c00000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0 0xff800000 0 0x600000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <435>, <428>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm8650-gcc";
+			reg = <0 0x00100000 0 0x1f4200>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy QMP_PCIE_PIPE_CLK>,
+				 <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
+				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipcc: mailbox@406000 {
+			compatible = "qcom,sm8650-ipcc", "qcom,ipcc";
+			reg = <0 0x00406000 0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0>;
+
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0>;
+
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart14: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_128mhz>;
+
+				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			uart15: serial@89c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				pinctrl-0 = <&qup_uart15_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+		};
+
+		i2c_master_hub_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-i2c-master-hub";
+			reg = <0 0x009c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
+			clock-names = "s-ahb";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c_hub_0: i2c@980000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00980000 0 0x4000>;
+
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				pinctrl-0 = <&hub_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_1: i2c@984000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00984000 0 0x4000>;
+
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				pinctrl-0 = <&hub_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_2: i2c@988000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00988000 0 0x4000>;
+
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				pinctrl-0 = <&hub_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_3: i2c@98c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0098c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				pinctrl-0 = <&hub_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_4: i2c@990000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00990000 0 0x4000>;
+
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				pinctrl-0 = <&hub_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_5: i2c@994000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00994000 0 0x4000>;
+
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				pinctrl-0 = <&hub_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_6: i2c@998000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00998000 0 0x4000>;
+
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				pinctrl-0 = <&hub_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_7: i2c@99c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0099c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				pinctrl-0 = <&hub_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_8: i2c@9a0000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a0000 0 0x4000>;
+
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				pinctrl-0 = <&hub_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_9: i2c@9a4000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a4000 0 0x4000>;
+
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				pinctrl-0 = <&hub_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0xc>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0xb6 0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
+
+			iommus = <&apps_smmu 0xa3 0>;
+
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_240mhz>;
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_240mhz>;
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi7: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8650-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,sm8650-cnoc-main";
+			reg = <0 0x01500000 0 0x14080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,sm8650-config-noc";
+			reg = <0 0x01600000 0 0x6200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8650-system-noc";
+			reg = <0 0x01680000 0 0x1d080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sm8650-pcie-anoc";
+			reg = <0 0x016c0000 0 0x12200>;
+
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8650-aggre1-noc";
+			reg = <0 0x016e0000 0 0x16400>;
+
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8650-aggre2-noc";
+			reg = <0 0x01700000 0 0x1e400>;
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,sm8650-mmss-noc";
+			reg = <0 0x01780000 0 0x5b800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie0: pcie@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			operating-points-v2 = <&pcie0_opp_table>;
+
+			iommu-map = <0     &apps_smmu 0x1400 0x1>,
+				    <0x100 &apps_smmu 0x1401 0x1>;
+
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			#interrupt-cells = <1>;
+
+			msi-map = <0x0 &gic_its 0x1400 0x1>,
+				  <0x100 &gic_its 0x1401 0x1>;
+			msi-map-mask = <0xff00>;
+
+			linux,pci-domain = <0>;
+			num-lanes = <2>;
+			bus-range = <0 0xff>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>,
+				 <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>;
+
+			dma-coherent;
+
+			status = "disabled";
+
+			pcie0_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+			};
+
+			pcieport0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			power-domains = <&gcc PCIE_0_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie1: pcie@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>,
+				 <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			operating-points-v2 = <&pcie1_opp_table>;
+
+			iommu-map = <0     &apps_smmu 0x1480 0x1>,
+				    <0x100 &apps_smmu 0x1481 0x1>;
+
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			#interrupt-cells = <1>;
+
+			msi-map = <0x0 &gic_its 0x1480 0x1>,
+				  <0x100 &gic_its 0x1481 0x1>;
+			msi-map-mask = <0xff00>;
+
+			linux,pci-domain = <1>;
+			num-lanes = <2>;
+			bus-range = <0 0xff>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			dma-coherent;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>,
+				 <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>;
+
+			status = "disabled";
+
+			pcie1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 and GEN 4 x1 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+				/* GEN 4 x2 */
+				opp-32000000 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+				};
+			};
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>,
+				 <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
+
+			power-domains = <&gcc PCIE_1_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			clock-output-names = "pcie1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d80000 {
+			compatible = "qcom,sm8650-qmp-ufs-phy";
+			reg = <0 0x01d80000 0 0x2000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&tcsr TCSR_UFS_CLKREF_EN>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			operating-points-v2 = <&ufs_opp_table>;
+
+			iommus = <&apps_smmu 0x60 0>;
+
+			lanes-per-direction = <2>;
+			qcom,ice = <&ice>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			#reset-cells = <1>;
+
+			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-201500000 {
+					opp-hz = /bits/ 64 <201500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <201500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-403000000 {
+					opp-hz = /bits/ 64 <403000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <403000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8650-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x18000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x28000>;
+
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			#dma-cells = <1>;
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+
+			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: clock-controller@1fc0000 {
+			compatible = "qcom,sm8650-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0xa0000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-43051401", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x2000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			iommus = <&adreno_smmu 0 0x0>,
+				 <&adreno_smmu 1 0x0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
+
+			interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "gfx-mem";
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			/* Speedbin needs more work on A740+, keep only lower freqs */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2-adreno",
+					     "operating-points-v2";
+
+				opp-231000000 {
+					opp-hz = /bits/ 64 <231000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					opp-peak-kBps = <2136718>;
+					qcom,opp-acd-level = <0xc82f5ffd>;
+				};
+
+				opp-310000000 {
+					opp-hz = /bits/ 64 <310000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					opp-peak-kBps = <2136718>;
+					qcom,opp-acd-level = <0xc82c5ffd>;
+				};
+
+				opp-366000000 {
+					opp-hz = /bits/ 64 <366000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					opp-peak-kBps = <6074218>;
+					qcom,opp-acd-level = <0xc02e5ffd>;
+				};
+
+				opp-422000000 {
+					opp-hz = /bits/ 64 <422000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <8171875>;
+					qcom,opp-acd-level = <0xc02d5ffd>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					opp-peak-kBps = <8171875>;
+					qcom,opp-acd-level = <0xc02a5ffd>;
+				};
+
+				opp-578000000 {
+					opp-hz = /bits/ 64 <578000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <8171875>;
+					qcom,opp-acd-level = <0x882c5ffd>;
+				};
+
+				opp-629000000 {
+					opp-hz = /bits/ 64 <629000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					opp-peak-kBps = <10687500>;
+					qcom,opp-acd-level = <0x882a5ffd>;
+				};
+
+				opp-680000000 {
+					opp-hz = /bits/ 64 <680000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <12449218>;
+					qcom,opp-acd-level = <0x882a5ffd>;
+				};
+
+				opp-720000000 {
+					opp-hz = /bits/ 64 <720000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-peak-kBps = <12449218>;
+					qcom,opp-acd-level = <0x882a5ffd>;
+				};
+
+				opp-770000000 {
+					opp-hz = /bits/ 64 <770000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <12449218>;
+					qcom,opp-acd-level = <0x882a5ffd>;
+				};
+
+				opp-834000000 {
+					opp-hz = /bits/ 64 <834000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <14398437>;
+					qcom,opp-acd-level = <0x882a5ffd>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-750.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b280000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x0>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-260000000 {
+					opp-hz = /bits/ 64 <260000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-625000000 {
+					opp-hz = /bits/ 64 <625000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8650-gpucc";
+			reg = <0 0x03d90000 0 0xa000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8650-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8650-ipa", "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING 0>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IPA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8650-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING 0>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx",
+					     "mss";
+
+			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
+					<&mpss_dsm_mem>, <&mpss_dsm_mem_2>,
+					<&qlink_logging_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <1>;
+
+				label = "mpss";
+			};
+		};
+
+		remoteproc_adsp: remoteproc@6800000 {
+			compatible = "qcom,sm8650-adsp-pas";
+			reg = <0x0 0x06800000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <2>;
+
+				label = "lpass";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "adsp";
+
+					qcom,non-secure-domain;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1043 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1044 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1045 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1046 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1007 0x40>,
+							 <&apps_smmu 0x1067 0x0>,
+							 <&apps_smmu 0x1087 0x0>;
+						dma-coherent;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06aa0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr3: soundwire@6ab0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ab0000 0 0x10000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&lpass_wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,sm8650-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
+			reg = <0 0x06ac0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire@6ad0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ad0000 0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&lpass_rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <11>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,sm8650-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
+			reg = <0 0x06ae0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06b00000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire@6b10000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06b10000 0 0x10000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&lpass_wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		swr2: soundwire@6d30000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06d30000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "core", "wakeup";
+			clocks = <&lpass_txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_vamacro: codec@6d44000 {
+			compatible = "qcom,sm8650-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
+			reg = <0 0x06d44000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@6e80000 {
+			compatible = "qcom,sm8650-lpass-lpi-pinctrl";
+			reg = <0 0x06e80000 0 0x20000>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic23_default: dmic23-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,sm8650-lpass-lpiaon-noc";
+			reg = <0 0x07400000 0 0x19080>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,sm8650-lpass-lpicx-noc";
+			reg = <0 0x07430000 0 0x3a200>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,sm8650-lpass-ag-noc";
+			reg = <0 0x07e40000 0 0xe080>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			iommus = <&apps_smmu 0x540 0>;
+
+			bus-width = <4>;
+
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8650-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x088e3000 0 0x154>;
+
+			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8650-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			power-domains = <&gcc USB3_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			mode-switch;
+			orientation-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a600000 {
+			compatible = "qcom,sm8650-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a600000 0 0xfc100>;
+
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&tcsr TCSR_USB3_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			phys = <&usb_1_hsphy>,
+			       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy",
+				    "usb3-phy";
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			iommus = <&apps_smmu 0x40 0>;
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			snps,hird-threshold = /bits/ 8 <0x0>;
+			snps,usb2-gadget-lpm-disable;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,is-utmi-l1-suspend;
+			snps,usb3_lpm_capable;
+			snps,usb2-lpm-disable;
+			snps,has-lpm-erratum;
+			tx-fifo-resize;
+
+			dma-coherent;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_dwc3_hs: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+					};
+				};
+			};
+		};
+
+		iris: video-codec@aa00000 {
+			compatible = "qcom,sm8650-iris";
+			reg = <0 0x0aa00000 0 0xf0000>;
+
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+					<&videocc VIDEO_CC_MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_MMCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "mxc",
+					     "mmcx";
+
+			operating-points-v2 = <&iris_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg",
+					     "video-mem";
+
+			memory-region = <&video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
+				 <&videocc VIDEO_CC_XO_CLK_ARES>,
+				 <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
+			reset-names = "bus",
+				      "xo",
+				      "core";
+
+			iommus = <&apps_smmu 0x1940 0>,
+				 <&apps_smmu 0x1947 0>;
+
+			dma-coherent;
+
+			/*
+			 * IRIS firmware is signed by vendors, only
+			 * enable on boards where the proper signed firmware
+			 * is available.
+			 */
+			status = "disabled";
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-196000000 {
+					opp-hz = /bits/ 64 <196000000>;
+					required-opps = <&rpmhpd_opp_low_svs_d1>,
+							<&rpmhpd_opp_low_svs_d1>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_low_svs>,
+							<&rpmhpd_opp_low_svs>;
+				};
+
+				opp-380000000 {
+					opp-hz = /bits/ 64 <380000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_svs>;
+				};
+
+				opp-435000000 {
+					opp-hz = /bits/ 64 <435000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-480000000 {
+					opp-hz = /bits/ 64 <480000000>;
+					required-opps = <&rpmhpd_opp_nom>,
+							<&rpmhpd_opp_nom>;
+				};
+
+				opp-533333334 {
+					opp-hz = /bits/ 64 <533333334>;
+					required-opps = <&rpmhpd_opp_turbo>,
+							<&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,sm8650-videocc";
+			reg = <0 0x0aaf0000 0 0x10000>;
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_VIDEO_AHB_CLK>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		cci0: cci@ac15000 {
+			compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac15000 0 0x1000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING 0>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+			pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac16000 {
+			compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac16000 0 0x1000>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING 0>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+			pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci2: cci@ac17000 {
+			compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac17000 0 0x1000>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING 0>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_2_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+			pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci2_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci2_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,sm8650-camcc";
+			reg = <0 0x0ade0000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8650-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x1c00 0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8650-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x3000>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupts-extended = <&mdss 0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-514000000 {
+						opp-hz = /bits/ 64 <514000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae95000 {
+				compatible = "qcom,sm8650-dsi-phy-4nm";
+				reg = <0 0x0ae95000 0 0x200>,
+				      <0 0x0ae95200 0 0x280>,
+				      <0 0x0ae95500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae97000 {
+				compatible = "qcom,sm8650-dsi-phy-4nm";
+				reg = <0 0x0ae97000 0 0x200>,
+				      <0 0x0ae97200 0 0x280>,
+				      <0 0x0ae97500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dp0: displayport-controller@af54000 {
+				compatible = "qcom,sm8650-dp";
+				reg = <0 0xaf54000 0 0x104>,
+				      <0 0xaf54200 0 0xc0>,
+				      <0 0xaf55000 0 0x770>,
+				      <0 0xaf56000 0 0x9c>,
+				      <0 0xaf57000 0 0x9c>;
+
+				interrupts-extended = <&mdss 12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				operating-points-v2 = <&dp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+							data-lanes = <0 1 2 3>;
+							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+						};
+					};
+				};
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8650-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8650-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+			interrupt-parent = <&intc>;
+
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 716 12>,
+					  <138 251 5>, <143 244 4>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c228000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c228000 0 0x1000>, /* TM */
+			      <0 0x0c222000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <15>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c229000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c229000 0 0x1000>, /* TM */
+			      <0 0x0c223000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens2: thermal-sensor@c22a000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c22a000 0 0x1000>, /* TM */
+			      <0 0x0c224000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <13>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c400000 0 0x3000>,
+			      <0 0x0c500000 0 0x400000>,
+			      <0 0x0c440000 0 0x80000>,
+			      <0 0x0c4c0000 0 0x20000>,
+			      <0 0x0c42d000 0 0x4000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+
+			interrupt-controller;
+			#interrupt-cells = <4>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8650-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 211>;
+
+			wakeup-parent = <&pdc>;
+
+			cci0_0_default: cci0-0-default-state {
+				sda-pins {
+					pins = "gpio113";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio114";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci0_0_sleep: cci0-0-sleep-state {
+				sda-pins {
+					pins = "gpio113";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio114";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci0_1_default: cci0-1-default-state {
+				sda-pins {
+					pins = "gpio115";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio116";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci0_1_sleep: cci0-1-sleep-state {
+				sda-pins {
+					pins = "gpio115";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio116";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_0_default: cci1-0-default-state {
+				sda-pins {
+					pins = "gpio117";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio118";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci1_0_sleep: cci1-0-sleep-state {
+				sda-pins {
+					pins = "gpio117";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio118";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_1_default: cci1-1-default-state {
+				sda-pins {
+					pins = "gpio12";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio13";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci1_1_sleep: cci1-1-sleep-state {
+				sda-pins {
+					pins = "gpio12";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio13";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_0_default: cci2-0-default-state {
+				sda-pins {
+					pins = "gpio112";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio153";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci2_0_sleep: cci2-0-sleep-state {
+				sda-pins {
+					pins = "gpio112";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio153";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_1_default: cci2-1-default-state {
+				sda-pins {
+					pins = "gpio119";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio120";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci2_1_sleep: cci2-1-sleep-state {
+				sda-pins {
+					pins = "gpio119";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio120";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "i2chub0_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c1_data_clk: hub-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio66", "gpio67";
+				function = "i2chub0_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c2_data_clk: hub-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "i2chub0_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c3_data_clk: hub-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio70", "gpio71";
+				function = "i2chub0_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c4_data_clk: hub-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "i2chub0_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c5_data_clk: hub-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio74", "gpio75";
+				function = "i2chub0_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c6_data_clk: hub-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "i2chub0_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c7_data_clk: hub-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio78", "gpio79";
+				function = "i2chub0_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c8_data_clk: hub-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio206", "gpio207";
+				function = "i2chub0_se8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c9_data_clk: hub-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "i2chub0_se9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio94";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio95";
+					function = "pcie0_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio96";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio97";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio98";
+					function = "pcie1_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio99";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio60", "gpio61";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio63";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio60", "gpio61", "gpio62";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio3";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio7";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio11";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio15";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio19";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio23";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio27";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart14_default: qup-uart14-default-state {
+				/* TX, RX */
+				pins = "gpio26", "gpio27";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			qup_uart15_default: qup-uart15-default-state {
+				/* TX, RX */
+				pins = "gpio30", "gpio31";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		funnel@10042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x10042000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+
+					funnel_in1_in_funnel_apss: endpoint {
+						remote-endpoint = <&funnel_apss_out_funnel_in1>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_in1_out_funnel_qdss: endpoint {
+						remote-endpoint = <&funnel_qdss_in_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@10045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x10045000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+
+					funnel_qdss_in_funnel_in1: endpoint {
+						remote-endpoint = <&funnel_in1_out_funnel_qdss>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_qdss_out_funnel_aoss: endpoint {
+						remote-endpoint = <&funnel_aoss_in_funnel_qdss>;
+					};
+				};
+			};
+		};
+
+		funnel@10b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x10b04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+
+					funnel_aoss_in_funnel_qdss: endpoint {
+						remote-endpoint = <&funnel_qdss_out_funnel_aoss>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_aoss_out_tmc_etf: endpoint {
+						remote-endpoint = <&tmc_etf_in_funnel_aoss>;
+					};
+				};
+			};
+		};
+
+		tmc@10b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+
+			reg = <0x0 0x10b05000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tmc_etf_in_funnel_aoss: endpoint {
+						remote-endpoint = <&funnel_aoss_out_tmc_etf>;
+					};
+				};
+			};
+		};
+
+		funnel@13810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x13810000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					funnel_apss_in_funnel_ete: endpoint {
+						remote-endpoint = <&funnel_ete_out_funnel_apss>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_apss_out_funnel_in1: endpoint {
+						remote-endpoint = <&funnel_in1_in_funnel_apss>;
+					};
+				};
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			dma-coherent;
+		};
+
+		intc: interrupt-controller@17100000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17100000 0 0x10000>,		/* GICD */
+			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>;
+
+			#interrupt-cells = <4>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu2 &cpu3 &cpu4 &cpu5 &cpu6>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu7>;
+				};
+			};
+
+			gic_its: msi-controller@17140000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17140000 0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17420000 0 0x1000>;
+
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				frame-number = <0>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17a00000 0 0x10000>,
+			      <0 0x17a10000 0 0x10000>,
+			      <0 0x17a20000 0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			power-domains = <&cluster_pd>;
+
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8650-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8650-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		epss_l3: interconnect@17d90000 {
+			compatible = "qcom,sm8650-epss-l3", "qcom,epss-l3";
+			reg = <0 0x17d90000 0 0x1000>;
+
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>,
+			      <0 0x17d93000 0 0x1000>,
+			      <0 0x17d94000 0 0x1000>;
+			reg-names = "freq-domain0",
+				    "freq-domain1",
+				    "freq-domain2",
+				    "freq-domain3";
+
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2",
+					  "dcvsh-irq-3";
+
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		pmu@24091000 {
+			compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x24091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <6515000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <7980000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <10437000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <12157000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <14060000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <16113000>;
+				};
+			};
+		};
+
+		pmu@240b7400 {
+			compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x240b7400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <4577000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <7110000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <14236000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <16265000>;
+				};
+			};
+		};
+
+		gem_noc: interconnect@24100000 {
+			compatible = "qcom,sm8650-gem-noc";
+			reg = <0 0x24100000 0 0xc5080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,sm8650-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>,
+			      <0 0x25a00000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
+
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sm8650-nsp-noc";
+			reg = <0 0x320c0000 0 0xf080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8650-cdsp-pas";
+			reg = <0x0 0x32300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING 0>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP>;
+			power-domain-names = "cx",
+					     "mxc",
+					     "nsp";
+
+			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <5>;
+
+				label = "cdsp";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "cdsp";
+
+					qcom,non-secure-domain;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+
+						iommus = <&apps_smmu 0x1961 0x0>,
+							 <&apps_smmu 0x0c01 0x20>,
+							 <&apps_smmu 0x19c1 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+
+						iommus = <&apps_smmu 0x1962 0x0>,
+							 <&apps_smmu 0x0c02 0x20>,
+							 <&apps_smmu 0x19c2 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1963 0x0>,
+							 <&apps_smmu 0x0c03 0x20>,
+							 <&apps_smmu 0x19c3 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1964 0x0>,
+							 <&apps_smmu 0x0c04 0x20>,
+							 <&apps_smmu 0x19c4 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1965 0x0>,
+							 <&apps_smmu 0x0c05 0x20>,
+							 <&apps_smmu 0x19c5 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1966 0x0>,
+							 <&apps_smmu 0x0c06 0x20>,
+							 <&apps_smmu 0x19c6 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1967 0x0>,
+							 <&apps_smmu 0x0c07 0x20>,
+							 <&apps_smmu 0x19c7 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+
+						iommus = <&apps_smmu 0x1968 0x0>,
+							 <&apps_smmu 0x0c08 0x20>,
+							 <&apps_smmu 0x19c8 0x0>;
+						dma-coherent;
+					};
+
+					/* note: secure cb9 in downstream */
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+
+						iommus = <&apps_smmu 0x196c 0x0>,
+							 <&apps_smmu 0x0c0c 0x20>,
+							 <&apps_smmu 0x19cc 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+
+						iommus = <&apps_smmu 0x196d 0x0>,
+							 <&apps_smmu 0x0c0d 0x20>,
+							 <&apps_smmu 0x19cd 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@14 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <14>;
+
+						iommus = <&apps_smmu 0x196e 0x0>,
+							 <&apps_smmu 0x0c0e 0x20>,
+							 <&apps_smmu 0x19ce 0x0>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				aoss0-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpuss0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				cpuss0-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpuss1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				cpuss1-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss2-thermal {
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpuss2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				cpuss2-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss3-thermal {
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpuss3-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				cpuss3-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-top-thermal {
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu2-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-bottom-thermal {
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu2-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-top-thermal {
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu3-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-bottom-thermal {
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu3-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu4-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu4-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu5-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu5-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu6-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu6-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				aoss1-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-middle-thermal {
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				cpu0-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				cpu1-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphvx0-thermal {
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				nsphvx0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				nsphvx0-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphvx1-thermal {
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				nsphvx1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				nsphvx1-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx0-thermal {
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				nsphmx0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				nsphmx0-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx1-thermal {
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				nsphmx1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				nsphmx1-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx2-thermal {
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				nsphmx2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				nsphmx2-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx3-thermal {
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				nsphmx3-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				nsphmx3-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				video-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				video-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				ddr-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				ddr-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera0-thermal {
+			thermal-sensors = <&tsens1 14>;
+
+			trips {
+				camera0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				camera0-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera1-thermal {
+			thermal-sensors = <&tsens1 15>;
+
+			trips {
+				camera1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				camera1-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss2-thermal {
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				aoss2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				aoss2-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 1>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu0_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 2>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss2-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 3>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu2_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss3-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 4>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu3_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu3_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss4-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 5>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu4_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu4_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss5-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 6>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu5_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu5_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss6-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 7>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu6_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu6_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss7-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens2 8>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu7_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu7_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem0-thermal {
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				modem0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				modem0-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem1-thermal {
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				modem1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				modem1-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem2-thermal {
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				modem2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				modem2-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem3-thermal {
+			thermal-sensors = <&tsens2 12>;
+
+			trips {
+				modem3-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				modem3-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
new file mode 100644
index 000000000000..3bbb53b7c71f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -0,0 +1,1202 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8750.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pmd8028.dtsi"
+#include "pmih0108.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+#include "sm8750-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8750 MTP";
+	compatible = "qcom,sm8750-mtp", "qcom,sm8750";
+	chassis-type = "handset";
+
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	wcd939x: audio-codec {
+		compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+		vdd-px-supply = <&vreg_l2i_1p2>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "qcom,sm8750-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8750-MTP";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3", /* MIC4 on schematics */
+				"VA DMIC1", "MIC BIAS3", /* MIC1 on schematics */
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS3",
+				"VA DMIC1", "VA MIC BIAS3",
+				"VA DMIC2", "VA MIC BIAS1",
+				"VA DMIC3", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * MTPs rev 2.0 (power grid v8) come with two different WiFi chips:
+	 * WCN7850 and WCN786x.
+	 * Device nodes here for the PMU, WiFi and Bluetooth describe the MTP
+	 * variant with WCN7850.
+	 */
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en>, <&bt_default>;
+
+		wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&pm8550ve_f_gpios 3 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s5f_0p85>;
+		vddio-supply = <&vreg_l3f_1p8>;
+		vddio1p2-supply = <&vreg_l2f_1p2>;
+		vddaon-supply = <&vreg_s4d_0p85>;
+		vdddig-supply = <&vreg_s1d_0p97>;
+		vddrfa1p2-supply = <&vreg_s7i_1p2>;
+		vddrfa1p8-supply = <&vreg_s3g_1p8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s3g_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s7i_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s7i_1p2>;
+		vdd-l12-supply = <&vreg_s3g_1p8>;
+		vdd-l15-supply = <&vreg_s3g_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3148000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p0: ldo11 {
+			regulator-name = "vreg_l11b_1p0";
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1292000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s7i_1p2>;
+		vdd-l2-supply = <&vreg_s1d_0p97>;
+		vdd-l3-supply = <&vreg_s1d_0p97>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "d";
+
+		vreg_s1d_0p97: smps1 {
+			regulator-name = "vreg_s1d_0p97";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3d_1p2: smps3 {
+			regulator-name = "vreg_s3d_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4d_0p85: smps4 {
+			regulator-name = "vreg_s4d_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1d_1p2: ldo1 {
+			regulator-name = "vreg_l1d_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p88: ldo2 {
+			regulator-name = "vreg_l2d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_0p88: ldo3 {
+			regulator-name = "vreg_l3d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1d_0p97>;
+		vdd-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-supply = <&vreg_s3g_1p8>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "f";
+
+		vreg_s5f_0p85: smps5 {
+			regulator-name = "vreg_s5f_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p88: ldo1 {
+			regulator-name = "vreg_l1f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p2: ldo2 {
+			regulator-name = "vreg_l2f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p8: ldo3 {
+			regulator-name = "vreg_l3f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1d_0p97>;
+		vdd-l2-supply = <&vreg_s3g_1p8>;
+		vdd-l3-supply = <&vreg_s7i_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "g";
+
+		vreg_s1g_0p5: smps1 {
+			regulator-name = "vreg_s1g_0p5";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_1p8: smps3 {
+			regulator-name = "vreg_s3g_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_0p75: smps4 {
+			regulator-name = "vreg_s4g_0p75";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <936000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2g_1p8: ldo2 {
+			regulator-name = "vreg_l2g_1p8";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1860000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s7i_1p2>;
+		vdd-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-supply = <&vreg_s1d_0p97>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s7i_1p2: smps7 {
+			regulator-name = "vreg_s7i_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1340000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8i_0p9: smps8 {
+			regulator-name = "vreg_s8i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <972000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p2: ldo1 {
+			regulator-name = "vreg_l1i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p88: ldo3 {
+			regulator-name = "vreg_l3i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1d_0p97>;
+		vdd-l2-supply = <&vreg_s7i_1p2>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "j";
+
+		vreg_s2j_1p1: smps2 {
+			regulator-name = "vreg_s2j_1p1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3j_1p1: smps3 {
+			regulator-name = "vreg_s3j_1p1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p91: ldo1 {
+			regulator-name = "vreg_l1j_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s3g_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p1: ldo1 {
+			regulator-name = "vreg_l1m_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_2p8: ldo6 {
+			regulator-name = "vreg_l6m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p96: ldo7 {
+			regulator-name = "vreg_l7m_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-l4-supply = <&vreg_s3g_1p8>;
+		vdd-l5-supply = <&vreg_bob2>;
+		vdd-l6-supply = <&vreg_bob2>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_1p8: ldo3 {
+			regulator-name = "vreg_l3n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_1p8: ldo4 {
+			regulator-name = "vreg_l4n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_2p8: ldo5 {
+			regulator-name = "vreg_l5n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_2p8: ldo6 {
+			regulator-name = "vreg_l6n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_3p3: ldo7 {
+			regulator-name = "vreg_l7n_3p3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		power-source = <1>;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1f_0p88>;
+	vdda-pll-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pmih0108_eusb2_repeater {
+	status = "okay";
+
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8750/adsp.mbn",
+			"qcom/sm8750/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8750/cdsp.mbn",
+			"qcom/sm8750/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8750/modem.mbn",
+			"qcom/sm8750/modem_dtb.mbn";
+
+	/* Modem crashes after some time with "DOG detects stalled initialization" */
+	status = "fail";
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA883x, left/front speaker */
+	left_spkr: speaker@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_0_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l15b_1p8>;
+		/*
+		 * WSA8835 Port 1 (DAC)     <=> SWR0 Port 1 (SPKR_L)
+		 * WSA8835 Port 2 (COMP)    <=> SWR0 Port 2 (SPKR_L_COMP)
+		 * WSA8835 Port 3 (BOOST)   <=> SWR0 Port 3 (SPKR_L_BOOST)
+		 * WSA8835 Port 4 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+		 */
+		qcom,port-mapping = <1 2 3 10>;
+	};
+
+	/* WSA883x, right/back speaker */
+	right_spkr: speaker@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l15b_1p8>;
+		/*
+		 * WSA8835 Port 1 (DAC)     <=> SWR0 Port 4 (SPKR_R)
+		 * WSA8835 Port 2 (COMP)    <=> SWR0 Port 5 (SPKR_R_COMP)
+		 * WSA8835 Port 3 (BOOST)   <=> SWR0 Port 6 (SPKR_R_BOOST)
+		 * WSA8835 Port 4 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+		 */
+		qcom,port-mapping = <4 5 6 11>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9395 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010e00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9395 RX Port 1 (HPH_L/R)      <=> SWR1 Port 1 (HPH_L/R)
+		 * WCD9395 RX Port 2 (CLSH)         <=> SWR1 Port 2 (CLSH)
+		 * WCD9395 RX Port 3 (COMP_L/R)     <=> SWR1 Port 3 (COMP_L/R)
+		 * WCD9395 RX Port 4 (LO)           <=> SWR1 Port 4 (LO)
+		 * WCD9395 RX Port 5 (DSD_L/R)      <=> SWR1 Port 5 (DSD_L/R)
+		 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5 9>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9395 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010e00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9395 TX Port 1 (ADC1,2,3,4)         <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1)   <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+		 * WCD9395 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+		 */
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	/* reserved for secure world */
+	gpio-reserved-ranges = <36 4>, <74 1>;
+};
+
+&uart7 {
+	status = "okay";
+};
+
+/* Pinctrl */
+&lpass_tlmm {
+	spkr_0_sd_n_active: spkr-0-sd-n-active-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&tlmm {
+	bt_default: bt-default-state {
+		sw-ctrl-pins {
+			pins = "gpio18";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio101";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1j_0p91>;
+	vdda-pll-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1d_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8750-pmics.dtsi b/arch/arm64/boot/dts/qcom/sm8750-pmics.dtsi
new file mode 100644
index 000000000000..6eb8d78937c3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8750-pmics.dtsi
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/ {
+	thermal-zones {
+		pm8550ve-d-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_d_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550ve-f-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_f_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550ve-g-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_g_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550vs-j-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550vs_j_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	/* PM8550VE */
+	pm8550ve_d: pmic@3 {
+		compatible = "qcom,pm8550ve", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_d_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_d_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_d_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8550ve_f: pmic@5 {
+		compatible = "qcom,pm8550ve", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_f_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_f_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_f_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8550ve_g: pmic@6 {
+		compatible = "qcom,pm8550ve", "qcom,spmi-pmic";
+		reg = <0x6 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_g_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_g_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_g_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	/* PM8550VS */
+	pm8550vs_j: pmic@9 {
+		compatible = "qcom,pm8550vs", "qcom,spmi-pmic";
+		reg = <0x9 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550vs_j_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550vs_j_gpios: gpio@8800 {
+			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550vs_j_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
new file mode 100644
index 000000000000..13c7b9664c89
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
@@ -0,0 +1,1056 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8750.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pmd8028.dtsi"
+#include "pmih0108.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+#include "sm8750-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8750 QRD";
+	compatible = "qcom,sm8750-qrd", "qcom,sm8750";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	wcd939x: audio-codec {
+		compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+		/*
+		 * Mismatch with schematics - downstream DTS has L15B at 1.8 V,
+		 * schematics L2I at 1.2 V
+		 */
+		vdd-px-supply = <&vreg_l15b_1p8>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "qcom,sm8750-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8750-QRD";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
+				"AMIC2", "MIC BIAS2",
+				"AMIC3", "MIC BIAS3",
+				"AMIC4", "MIC BIAS3",
+				"AMIC5", "MIC BIAS4",
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT2", "ADC3_OUTPUT",
+				"TX SWR_INPUT3", "ADC4_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s3g_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s7i_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s7i_1p2>;
+		vdd-l12-supply = <&vreg_s3g_1p8>;
+		vdd-l15-supply = <&vreg_s3g_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3148000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p0: ldo11 {
+			regulator-name = "vreg_l11b_1p0";
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1292000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s7i_1p2>;
+		vdd-l2-supply = <&vreg_s1d_0p97>;
+		vdd-l3-supply = <&vreg_s1d_0p97>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "d";
+
+		vreg_s1d_0p97: smps1 {
+			regulator-name = "vreg_s1d_0p97";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3d_1p2: smps3 {
+			regulator-name = "vreg_s3d_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4d_0p85: smps4 {
+			regulator-name = "vreg_s4d_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1d_1p2: ldo1 {
+			regulator-name = "vreg_l1d_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p88: ldo2 {
+			regulator-name = "vreg_l2d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_0p88: ldo3 {
+			regulator-name = "vreg_l3d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1d_0p97>;
+		vdd-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-supply = <&vreg_s3g_1p8>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "f";
+
+		vreg_s5f_0p5: smps5 {
+			regulator-name = "vreg_s5f_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p88: ldo1 {
+			regulator-name = "vreg_l1f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p2: ldo2 {
+			regulator-name = "vreg_l2f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p8: ldo3 {
+			regulator-name = "vreg_l3f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1d_0p97>;
+		vdd-l2-supply = <&vreg_s3g_1p8>;
+		vdd-l3-supply = <&vreg_s7i_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "g";
+
+		vreg_s1g_0p5: smps1 {
+			regulator-name = "vreg_s1g_0p5";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_1p8: smps3 {
+			regulator-name = "vreg_s3g_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_0p75: smps4 {
+			regulator-name = "vreg_s4g_0p75";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <936000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2g_1p8: ldo2 {
+			regulator-name = "vreg_l2g_1p8";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1860000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s7i_1p2>;
+		vdd-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-supply = <&vreg_s1d_0p97>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s7i_1p2: smps7 {
+			regulator-name = "vreg_s7i_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1340000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8i_0p9: smps8 {
+			regulator-name = "vreg_s8i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <972000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p2: ldo1 {
+			regulator-name = "vreg_l1i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p88: ldo3 {
+			regulator-name = "vreg_l3i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1d_0p97>;
+		vdd-l2-supply = <&vreg_s7i_1p2>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "j";
+
+		vreg_s2j_1p1: smps2 {
+			regulator-name = "vreg_s2j_1p1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3j_1p1: smps3 {
+			regulator-name = "vreg_s3j_1p1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+
+		vreg_l1j_0p91: ldo1 {
+			regulator-name = "vreg_l1j_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-l4-supply = <&vreg_s3g_1p8>;
+		vdd-l5-supply = <&vreg_s3g_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p1: ldo1 {
+			regulator-name = "vreg_l1m_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_2p8: ldo6 {
+			regulator-name = "vreg_l6m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p96: ldo7 {
+			regulator-name = "vreg_l7m_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-l4-supply = <&vreg_s7i_1p2>;
+		vdd-l5-supply = <&vreg_bob2>;
+		vdd-l6-supply = <&vreg_bob2>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_1p8: ldo3 {
+			regulator-name = "vreg_l3n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_1p8: ldo4 {
+			regulator-name = "vreg_l4n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_2p8: ldo5 {
+			regulator-name = "vreg_l5n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_2p8: ldo6 {
+			regulator-name = "vreg_l6n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_3p3: ldo7 {
+			regulator-name = "vreg_l7n_3p3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		power-source = <1>;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pmih0108_eusb2_repeater {
+	status = "okay";
+
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8750/adsp.mbn",
+			"qcom/sm8750/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8750/cdsp.mbn",
+			"qcom/sm8750/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8750/modem.mbn",
+			"qcom/sm8750/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker North */
+	north_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_0_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 76 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l2i_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 1 (SPKR_L)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 2 (SPKR_L_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 3 (SPKR_L_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Speaker South */
+	south_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l2i_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 4 (SPKR_R)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 5 (SPKR_R_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 6 (SPKR_R_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9395 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010e00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9395 RX Port 1 (HPH_L/R)      <=> SWR1 Port 1 (HPH_L/R)
+		 * WCD9395 RX Port 2 (CLSH)         <=> SWR1 Port 2 (CLSH)
+		 * WCD9395 RX Port 3 (COMP_L/R)     <=> SWR1 Port 3 (COMP_L/R)
+		 * WCD9395 RX Port 4 (LO)           <=> SWR1 Port 4 (LO)
+		 * WCD9395 RX Port 5 (DSD_L/R)      <=> SWR1 Port 5 (DSD_L/R)
+		 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5 9>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9395 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010e00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9395 TX Port 1 (ADC1,2,3,4)         <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1)   <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+		 * WCD9395 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+		 */
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	/* reserved for secure world */
+	gpio-reserved-ranges = <36 4>, <74 1>;
+
+	spkr_0_sd_n_active: spkr-0-sd-n-active-state {
+		pins = "gpio76";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio101";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1j_0p91>;
+	vdda-pll-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1d_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
new file mode 100644
index 000000000000..a82d9867c7cb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -0,0 +1,4083 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8750-gcc.h>
+#include <dt-bindings/clock/qcom,sm8750-tcsr.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sm8750-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd4>;
+			power-domain-names = "psci";
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd5>;
+			power-domain-names = "psci";
+		};
+
+		cpu6: cpu@10000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&l2_1>;
+			power-domains = <&cpu_pd6>;
+			power-domain-names = "psci";
+
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		cpu7: cpu@10100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_1>;
+			power-domains = <&cpu_pd7>;
+			power-domain-names = "psci";
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cluster0_c4: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret";
+				arm,psci-suspend-param = <0x00000004>;
+				entry-latency-us = <93>;
+				exit-latency-us = <129>;
+				min-residency-us = <560>;
+			};
+
+			cluster1_c4: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret";
+				arm,psci-suspend-param = <0x00000004>;
+				entry-latency-us = <172>;
+				exit-latency-us = <130>;
+				min-residency-us = <686>;
+			};
+		};
+
+		domain-idle-states {
+			cluster_cl5: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x01000054>;
+				entry-latency-us = <2150>;
+				exit-latency-us = <1983>;
+				min-residency-us = <9144>;
+			};
+
+			domain_ss3: domain-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x0200c354>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8750", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sm8750-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sm8750-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0xa0000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster0_pd>;
+			domain-idle-states = <&cluster0_c4>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster0_pd>;
+			domain-idle-states = <&cluster0_c4>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster0_pd>;
+			domain-idle-states = <&cluster0_c4>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster0_pd>;
+			domain-idle-states = <&cluster0_c4>;
+		};
+
+		cpu_pd4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster0_pd>;
+			domain-idle-states = <&cluster0_c4>;
+		};
+
+		cpu_pd5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster0_pd>;
+			domain-idle-states = <&cluster0_c4>;
+		};
+
+		cpu_pd6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster1_pd>;
+			domain-idle-states = <&cluster1_c4>;
+		};
+
+		cpu_pd7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster1_pd>;
+			domain-idle-states = <&cluster1_c4>;
+		};
+
+		cluster0_pd: power-domain-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_cl5>;
+			power-domains = <&system_pd>;
+		};
+
+		cluster1_pd: power-domain-cluster1 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_cl5>;
+			power-domains = <&system_pd>;
+		};
+
+		system_pd: power-domain-system {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&domain_ss3>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gunyah_hyp_mem: gunyah-hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0xe00000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm-mem@80e00000 {
+			reg = <0x0 0x80e00000 0x0 0x40000>;
+			no-map;
+		};
+
+		cpucp_mem: cpucp@81200000 {
+			reg = <0x0 0x81200000 0x0 0x200000>;
+			no-map;
+		};
+
+		xbl_dtlog_mem: xbl-dtlog@81a00000 {
+			reg = <0x0 0x81a00000 0x0 0x40000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@81c00000 {
+			reg = <0x0 0x81c00000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x81c60000 0x0 0x20000>;
+			no-map;
+		};
+
+		/* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */
+		aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 {
+			reg = <0x0 0x81c80000 0x0 0x74000>;
+			no-map;
+		};
+
+		/* Secdata region can be reused by apps */
+
+		smem_mem: smem@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x81d00000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		pdp_ns_shared_mem: pdp-ns-shared@81f00000 {
+			reg = <0x0 0x81f00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cpucp_scandump_mem: cpucp-scandump@82000000 {
+			reg = <0x0 0x82000000 0x0 0x380000>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi@82380000 {
+			reg = <0x0 0x82380000 0x0 0x20000>;
+			no-map;
+		};
+
+		soccp_sdi_mem: soccp-sdi@823a0000 {
+			reg = <0x0 0x823a0000 0x0 0x40000>;
+			no-map;
+		};
+
+		pmic_minii_dump_mem: pmic-minii-dump@823e0000 {
+			reg = <0x0 0x823e0000 0x0 0x80000>;
+			no-map;
+		};
+
+		pvmfw_mem: pvmfw@824a0000 {
+			reg = <0x0 0x824a0000 0x0 0x100000>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync@82600000 {
+			reg = <0x0 0x82600000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0x0 0x82700000 0x0 0x100000>;
+			no-map;
+		};
+
+		qdss_mem: qdss@82800000 {
+			reg = <0x0 0x82800000 0x0 0x2000000>;
+			no-map;
+		};
+
+		dsm_partition_1_mem: dsm-partition-1@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x4900000>;
+			no-map;
+		};
+
+		dsm_partition_2_mem: dsm-partition-2@89300000 {
+			reg = <0x0 0x89300000 0x0 0xa80000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8ba00000 {
+			reg = <0x0 0x8ba00000 0x0 0xf600000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 {
+			reg = <0x0 0x9b000000 0x0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@9b080000 {
+			reg = <0x0 0x9b080000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@9b090000 {
+			reg = <0x0 0x9b090000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code@9b09a000 {
+			reg = <0x0 0x9b09a000 0x0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss@9b0a0000  {
+			reg = <0x0 0x9b0a0000 0x0 0x1e0000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: spu-tz-shared@9b280000 {
+			reg = <0x0 0x9b280000 0x0 0x40000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: spu-modem-shared@9b2c0000 {
+			reg = <0x0 0x9b2c0000 0x0 0x40000>;
+			no-map;
+		};
+
+		camera_mem: camera@9b300000 {
+			reg = <0x0 0x9b300000 0x0 0x800000>;
+			no-map;
+		};
+
+		camera_2_mem: camera-2@9bb00000 {
+			reg = <0x0 0x9bb00000 0x0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video@9c300000 {
+			reg = <0x0 0x9c300000 0x0 0x800000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@9cb00000 {
+			reg = <0x0 0x9cb00000 0x0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@9d200000 {
+			reg = <0x0 0x9d200000 0x0 0x1900000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@9eb00000 {
+			reg = <0x0 0x9eb00000 0x0 0x80000>;
+			no-map;
+		};
+
+		soccp_mem: soccp@9ec00000 {
+			reg = <0x0 0x9ec00000 0x0 0x180000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@9ed80000 {
+			reg = <0x0 0x9ed80000 0x0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@9ee00000 {
+			reg = <0x0 0x9ee00000 0x0 0x3a80000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@b8000000 {
+			reg = <0x0 0xb8000000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf@d4e23000 {
+			no-map;
+			reg = <0x0 0xd4e23000 0x0 0x2dd000>;
+		};
+
+		/* Merged tz_reserved, xbl_sc, and qtee regions */
+		tz_merged_mem: tz-merged@d8000000 {
+			reg = <0x0 0xd8000000 0x0 0x600000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: trust-ui-vm@f3800000 {
+			reg = <0x0 0xf3800000 0x0 0x4400000>;
+			no-map;
+		};
+
+		oem_vm_mem: oem-vm@f7c00000 {
+			reg = <0x0 0xf7c00000 0x0 0x4c00000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0x0 0xff800000 0x0 0x800000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <435>, <428>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		/* TODO: smem mailbox in and out */
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm8750-gcc";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <0>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipcc: mailbox@406000 {
+			compatible = "qcom,sm8750-ipcc", "qcom,ipcc";
+			reg = <0x0 0x00406000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8750-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x00800000 0x0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x1e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00880000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00880000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00884000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00884000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0088c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x0088c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00890000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00890000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00894000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00894000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart14: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00898000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart14_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			i2c15: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0089c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi15: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x0089c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		i2c_master_hub_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-i2c-master-hub";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
+			clock-names = "s-ahb";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c_hub_0: i2c@980000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_1: i2c@984000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_2: i2c@988000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_3: i2c@98c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_4: i2c@990000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_5: i2c@994000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00994000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_6: i2c@998000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00998000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_7: i2c@99c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x0099c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_8: i2c@9a0000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x009a0000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_9: i2c@9a4000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x009a4000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8750-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x00a00000 0x0 0x60000>;
+
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x1e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0xb6 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0xa3 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a80000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a80000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a98000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a98000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart7: serial@a9c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a9c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart7_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+		};
+
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8750-trng", "qcom,trng";
+			reg = <0x0 0x010c3000 0x0 0x1000>;
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,sm8750-cnoc-main";
+			reg = <0x0 0x01500000 0x0 0x16080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,sm8750-config-noc";
+			reg = <0x0 0x01600000 0x0 0x6200>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8750-system-noc";
+			reg = <0x0 0x01680000 0x0 0x1d080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sm8750-pcie-anoc";
+			reg = <0x0 0x016c0000 0x0 0x11400>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8750-aggre1-noc";
+			reg = <0x0 0x016e0000 0x0 0x16400>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8750-aggre2-noc";
+			reg = <0x0 0x01700000 0x0 0x1f400>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,sm8750-mmss-noc";
+			reg = <0x0 0x01780000 0x0 0x5b800>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8750-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x01d88000 0x0 0x18000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			#dma-cells = <1>;
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8750-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8750-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx",
+					     "mss";
+
+			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
+					<&dsm_partition_1_mem>,
+					<&dsm_partition_2_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <1>;
+
+				label = "mpss";
+			};
+		};
+
+		remoteproc_adsp: remoteproc@6800000 {
+			compatible = "qcom,sm8750-adsp-pas", "qcom,sm8550-adsp-pas";
+			reg = <0x0 0x06800000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				qcom,remote-pid = <2>;
+				label = "lpass";
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1041 0x20>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,sm8750-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0x0 0x06aa0000 0x0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr3: soundwire@6ab0000 {
+			compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+			reg = <0x0 0x06ab0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,sm8750-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
+			reg = <0x0 0x06ac0000 0x0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire@6ad0000 {
+			compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+			reg = <0x0 0x06ad0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <1>;
+			qcom,dout-ports = <11>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0x31 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0x0f 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0x18 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,sm8750-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
+			reg = <0x0 0x06ae0000 0x0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,sm8750-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0x0 0x06b00000 0x0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire@6b10000 {
+			compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+			reg = <0x0 0x06b10000 0x0 0x10000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,sm8750-lpass-ag-noc";
+			reg = <0x0 0x07e40000 0x0 0xe080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,sm8750-lpass-lpiaon-noc";
+			reg = <0x0 0x07400000 0x0 0x19080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpicx_noc: interconnect@7420000 {
+			compatible = "qcom,sm8750-lpass-lpicx-noc";
+			reg = <0x0 0x07420000 0x0 0x44080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		swr2: soundwire@7630000 {
+			compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+			reg = <0x0 0x07630000 0x0 0x10000>;
+			interrupts = <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+			clocks = <&lpass_txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_vamacro: codec@7660000 {
+			compatible = "qcom,sm8750-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
+			reg = <0x0 0x07660000 0x0 0x2000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@7760000 {
+			compatible = "qcom,sm8750-lpass-lpi-pinctrl",
+				     "qcom,sm8650-lpass-lpi-pinctrl";
+			reg = <0x0 0x07760000 0x0 0x20000>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic23_default: dmic23-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8750-pdc", "qcom,pdc";
+			reg = <0x0 0x0b220000 0x0 0x10000>, <0x0 0x164400f0 0x0 0x64>;
+
+			qcom,pdc-ranges = <0 745 51>, <51 527 47>,
+					  <98 609 32>, <130 717 12>,
+					  <142 251 5>, <147 796 16>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8750-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c400000 0x0 0x3000>,
+			      <0x0 0x0c500000 0x0 0x400000>,
+			      <0x0 0x0c440000 0x0 0x80000>,
+			      <0x0 0x0c4c0000 0x0 0x10000>,
+			      <0x0 0x0c42d000 0x0 0x4000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+
+			interrupt-controller;
+			#interrupt-cells = <4>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8750-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x102000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 216>;
+			wakeup-parent = <&pdc>;
+
+			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "i2chub0_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c1_data_clk: hub-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio66", "gpio67";
+				function = "i2chub0_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c2_data_clk: hub-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "i2chub0_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c3_data_clk: hub-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio70", "gpio71";
+				function = "i2chub0_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c4_data_clk: hub-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "i2chub0_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c5_data_clk: hub-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio74", "gpio75";
+				function = "i2chub0_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c6_data_clk: hub-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "i2chub0_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c7_data_clk: hub-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio82", "gpio83";
+				function = "i2chub0_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c8_data_clk: hub-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio206", "gpio207";
+				function = "i2chub0_se8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c9_data_clk: hub-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "i2chub0_se9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio102";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio103";
+					function = "pcie0_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio104";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio28", "gpio29";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio3";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio7";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio11";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio15";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio19";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio23";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio31";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio28", "gpio29", "gpio30";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart7_default: qup-uart7-default-state {
+				/* TX, RX */
+				pins = "gpio62", "gpio63";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart14_default: qup-uart14-default-state {
+				/* TX, RX */
+				pins = "gpio26", "gpio27";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		tcsrcc: clock-controller@f204008 {
+			compatible = "qcom,sm8750-tcsr", "syscon";
+			reg = <0x0 0x0f204008 0x0 0x3004>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8750-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 493 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			dma-coherent;
+		};
+
+		intc: interrupt-controller@16000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x16000000 0x0 0x10000>,
+			      <0x0 0x16080000 0x0 0x200000>;
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@16040000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x16040000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		pcie0: pcie@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8750", "qcom,pcie-sm8550";
+			reg = <0x0 0x01c00000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40100000 0x0 0x100000>,
+			      <0x0 0x01C03000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x23d00000>,
+				 <0x03000000 0x4 0x00000000 0x4 0x00000000 0x3 0x00000000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <0>;
+
+			msi-map = <0x0 &gic_its 0x1400 0x1>,
+				  <0x100 &gic_its 0x1401 0x1>;
+			msi-map-mask = <0xff00>;
+
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			iommu-map = <0x0   &apps_smmu 0x1400 0x1>,
+				    <0x100 &apps_smmu 0x1401 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc GCC_PCIE_0_GDSC>;
+
+			operating-points-v2 = <&pcie0_opp_table>;
+
+			status = "disabled";
+
+			pcie0_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+			};
+
+			pcieport0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+				phys = <&pcie0_phy>;
+			};
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8750-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&tcsrcc TCSR_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			power-domains = <&gcc GCC_PCIE_0_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d80000 {
+			compatible = "qcom,sm8750-qmp-ufs-phy";
+			reg = <0x0 0x01d80000 0x0 0x2000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&tcsrcc TCSR_UFS_CLKREF_EN>;
+
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sm8750-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_LN_BB_CLK3>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+
+			operating-points-v2 = <&ufs_opp_table>;
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x60 0>;
+			dma-coherent;
+
+			lanes-per-direction = <2>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			#reset-cells = <1>;
+
+			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-403000000 {
+					opp-hz = /bits/ 64 <403000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <403000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		apps_rsc: rsc@16500000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x16500000 0x0 0x10000>,
+			      <0x0 0x16510000 0x0 0x10000>,
+			      <0x0 0x16520000 0x0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			power-domains = <&system_pd>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8750-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8750-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d3: opp-50 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D3>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp-224 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+
+					rpmhpd_opp_turbo_l2: opp-432 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>;
+					};
+
+					rpmhpd_opp_turbo_l3: opp-448 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>;
+					};
+
+					rpmhpd_opp_turbo_l4: opp-452 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L4>;
+					};
+
+					rpmhpd_opp_super_turbo_no_cpr: opp-480 {
+						opp-level =
+							<RPMH_REGULATOR_LEVEL_SUPER_TURBO_NO_CPR>;
+					};
+				};
+			};
+		};
+
+		timer@16800000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x16800000 0x0 0x1000>;
+
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0 0x20000000>;
+
+			frame@16801000 {
+				reg = <0x0 0x16801000 0x1000>,
+				      <0x0 0x16802000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@16803000 {
+				reg = <0x0 0x16803000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@16805000 {
+				reg = <0x0 0x16805000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@16807000 {
+				reg = <0x0 0x16807000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@16809000 {
+				reg = <0x0 0x16809000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1680b000 {
+				reg = <0x0 0x1680b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1680d000 {
+				reg = <0x0 0x1680d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		/* cluster0 */
+		pmu@240b3400 {
+			compatible = "qcom,sm8750-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x240b3400 0x0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			nonposted-mmio;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <800000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2188000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <5414400>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <6220800>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <6835200>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <8371200>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <10944000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <12748800>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <14745600>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <16896000>;
+				};
+
+				opp-10 {
+					opp-peak-kBps = <19046400>;
+				};
+			};
+		};
+
+		/* cluster1 */
+		pmu@240b7400 {
+			compatible = "qcom,sm8750-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x240b7400 0x0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+		};
+
+		gem_noc: interconnect@24100000 {
+			compatible = "qcom,sm8750-gem-noc";
+			reg = <0x0 0x24100000 0x0 0x14b080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		system-cache-controller@24800000 {
+			compatible = "qcom,sm8750-llcc";
+			reg = <0x0 0x24800000 0x0 0x200000>,
+			      <0x0 0x25800000 0x0 0x200000>,
+			      <0x0 0x24c00000 0x0 0x200000>,
+			      <0x0 0x25c00000 0x0 0x200000>,
+			      <0x0 0x26800000 0x0 0x200000>,
+			      <0x0 0x26c00000 0x0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
+
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sm8750-nsp-noc";
+			reg = <0x0 0x320c0000 0x0 0x13080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8750-cdsp-pas", "qcom,sm8650-cdsp-pas";
+			reg = <0x0 0x32300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP>;
+			power-domain-names = "cx",
+					     "mxc",
+					     "nsp";
+
+			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>;
+			qcom,qmp = <&aoss_qmp>;
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				qcom,remote-pid = <5>;
+				label = "cdsp";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x19c1 0x0>,
+							 <&apps_smmu 0x0c21 0x0>,
+							 <&apps_smmu 0x0c01 0x40>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1962 0x0>,
+							 <&apps_smmu 0x0c02 0x20>,
+							 <&apps_smmu 0x0c42 0x0>,
+							 <&apps_smmu 0x19c2 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1963 0x0>,
+							 <&apps_smmu 0x0c23 0x0>,
+							 <&apps_smmu 0x0c03 0x40>,
+							 <&apps_smmu 0x19c3 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1964 0x0>,
+							 <&apps_smmu 0x0c24 0x0>,
+							 <&apps_smmu 0x0c04 0x40>,
+							 <&apps_smmu 0x19c4 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1965 0x0>,
+							 <&apps_smmu 0x0c25 0x0>,
+							 <&apps_smmu 0x0c05 0x40>,
+							 <&apps_smmu 0x19c5 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1966 0x0>,
+							 <&apps_smmu 0x0c06 0x20>,
+							 <&apps_smmu 0x0c46 0x0>,
+							 <&apps_smmu 0x19c6 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1967 0x0>,
+							 <&apps_smmu 0x0c27 0x0>,
+							 <&apps_smmu 0x0c07 0x40>,
+							 <&apps_smmu 0x19c7 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1968 0x0>,
+							 <&apps_smmu 0x0c08 0x20>,
+							 <&apps_smmu 0x0c48 0x0>,
+							 <&apps_smmu 0x19c8 0x0>;
+						dma-coherent;
+					};
+
+					/* note: secure cb9 in downstream */
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&apps_smmu 0x196c 0x0>,
+							 <&apps_smmu 0x0c2c 0x20>,
+							 <&apps_smmu 0x0c0c 0x40>,
+							 <&apps_smmu 0x19cc 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+						iommus = <&apps_smmu 0x196d 0x0>,
+							 <&apps_smmu 0x0c0d 0x20>,
+							 <&apps_smmu 0x0c2e 0x0>,
+							 <&apps_smmu 0x0c4d 0x0>,
+							 <&apps_smmu 0x19cd 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@14 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <14>;
+						iommus = <&apps_smmu 0x196e 0x0>,
+							 <&apps_smmu 0x0c0e 0x20>,
+							 <&apps_smmu 0x19ce 0x0>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
new file mode 100644
index 000000000000..ee3c8c5e2c50
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
@@ -0,0 +1,1491 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	model = "ASUS Zenbook A14";
+	chassis-type = "laptop";
+
+	aliases {
+		serial0 = &uart21;
+		serial1 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			label = "lid";
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&cam_indicator_en>;
+		pinctrl-names = "default";
+
+		led-camera-indicator {
+			label = "white:camera-indicator";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			/* Reuse as a panic indicator until we get a "camera on" trigger */
+			panic-indicator;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Left-side display-adjacent port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side user-adjacent port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-ASUS-Zenbook-A14";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS1",
+				"VA DMIC1", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS1",
+				"VA DMIC1", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>,
+					    <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>,
+					    <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>,
+					    <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_MISC_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&misc_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vreg_vph_pwr>;
+		vdd-bob2-supply = <&vreg_vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vreg_vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p9: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+		vdd-s2-supply = <&vreg_vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vreg_vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p9: ldo1 {
+			regulator-name = "vreg_l1j_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* ELAN, 04F3:3315 */
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* Left-side display-adjacent port */
+	typec-mux@8 {
+		compatible = "parade,ps8833", "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* ASUSTeK, 0B05:4543 */
+	hdtl@17 {
+		compatible = "hid-over-i2c";
+		reg = <0x17>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&hdtl_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	/* EC @0x5b */
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* Left-side user-adjacent port */
+	typec-mux@8 {
+		compatible = "parade,ps8833", "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* ASUSTeK, 0B05:0220 */
+	keyboard@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+			power-supply = <&vreg_edp_3p3>;
+
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>;
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>;
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-disable;
+		input-disable;
+		output-enable;
+		drive-push-pull;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>;
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>;
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&spi10 {
+	status = "disabled";
+
+	/* Unknown device */
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <44 4>,  /* SPI11, TZ Protected */
+			       <90 1>;	/* Unknown, TZ Protected */
+
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	hdtl_default: hdtl-default-state {
+		pins = "gpio95";
+		function = "gpio";
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-disable;
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_bt_en: wcn-bt-en-state {
+		pins = "gpio116";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_en: wcn-wlan-en-state {
+		pins = "gpio117";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+
+	status = "okay";
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p9>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p9>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
new file mode 100644
index 000000000000..3c9455fede5c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
@@ -0,0 +1,1811 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 CRD";
+	compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>, <&kypd_vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "volume_up";
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		switch-lid {
+			label = "lid";
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		/* Left-side rear port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side front port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Right-side port */
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss2_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss2_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-CRD";
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_woofer>, <&left_tweeter>,
+					    <&swr0 0>, <&lpass_wsamacro 0>,
+					    <&right_woofer>, <&right_tweeter>,
+					    <&swr3 0>, <&lpass_wsa2macro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_MISC_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&misc_3p3_reg_en>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDX_VPH_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+		vdd-supply = <&vreg_rtmr2_1p15>;
+		vdd33-supply = <&vreg_rtmr2_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+		vddar-supply = <&vreg_rtmr2_1p15>;
+		vddat-supply = <&vreg_rtmr2_1p15>;
+		vddio-supply = <&vreg_rtmr2_1p8>;
+
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr2_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss2_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss2_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss2_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+
+		#phy-cells = <0>;
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "samsung,atna45af01", "samsung,atna33xc20";
+			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+			power-supply = <&vreg_edp_3p3>;
+
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie5 {
+	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-0 = <&pcie5_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie6a_default>;
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	kypd_vol_up_n: kypd-vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-pull-up;
+		input-enable;
+	};
+
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		input-disable;
+		output-enable;
+		drive-push-pull;
+		power-source = <1>; /* 1.8 V */
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/adsp.mbn",
+			"qcom/x1e80100/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/cdsp.mbn",
+			"qcom/x1e80100/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+	status = "okay";
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Woofer */
+	left_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Left Tweeter */
+	left_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&swr3 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Right Woofer */
+	right_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Tweeter */
+	right_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie5_default: pcie5-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie5_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio149";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_default: rtmr2-reset-n-active-state {
+		pins = "gpio185";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-disable;
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
+		pins = "gpio189";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
+		pins = "gpio126";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
+		pins = "gpio187";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio221";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_2_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&retimer_ss2_ss_in>;
+};
+
+&usb_mp {
+	/* Only second port is used with USB 2.0 maximum speed */
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
new file mode 100644
index 000000000000..cc64558ed5e6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
@@ -0,0 +1,1666 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ * Copyright (c) 2025 Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+ * Copyright (c) 2025 Val Packett <val@packett.cool>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	chassis-type = "laptop";
+
+	aliases {
+		serial0 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <40000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Display-adjacent port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* User-adjacent port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&cam_indicator_en>;
+		pinctrl-names = "default";
+
+		led-camera-indicator {
+			label = "white:camera-indicator";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			/* Reuse as a panic indicator until we get a "camera on" trigger */
+			panic-indicator;
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound: sound {
+		compatible = "qcom,x1e80100-sndcard";
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK1 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS1",
+				"VA DMIC1", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS1",
+				"VA DMIC1", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_woofer>, <&left_tweeter>,
+					    <&swr0 0>, <&lpass_wsamacro 0>,
+					    <&right_woofer>, <&right_tweeter>,
+					    <&swr3 0>, <&lpass_wsa2macro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_cam_1p8: regulator-cam-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_CAM_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&cam_ldo_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	keyboard@5 {
+		compatible = "hid-over-i2c";
+		reg = <0x5>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8833", "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* EC @0x3b */
+
+	/* Type A Port */
+	eusb3_typea_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	/* Fingerprint scanner */
+	eusb5_frp_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb5_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8833", "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+};
+
+&i2c20 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			enable-gpios = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+			power-supply = <&vreg_edp_3p3>;
+
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mdss_dp3_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l6b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Woofer */
+	left_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Left Tweeter */
+	left_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&swr3 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Right Woofer */
+	right_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Tweeter */
+	right_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <44 4>,  /* SPI11 (TPM) */
+			       <76 4>,  /* SPI19 (TZ Protected) */
+			       <238 1>; /* UFS Reset */
+
+	cam_rgb_default: cam-rgb-default-state {
+		mclk-pins {
+			pins = "gpio100";
+			function = "cam_aon";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio237";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	cam_ldo_en: cam-ldo-en-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio74";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb5_reset_n: eusb5-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	tpad_default: tpad-default-state {
+		disable-pins {
+			pins = "gpio38";
+			function = "gpio";
+			output-high;
+		};
+
+		int-n-pins {
+			pins = "gpio3";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio52";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	ts0_default: ts0-default-state {
+		disable-pins {
+			pins = "gpio75";
+			function = "gpio";
+			output-high;
+		};
+
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			/* Technically should be High-Z input */
+			pins = "gpio48";
+			function = "gpio";
+			output-low;
+			drive-strength = <2>;
+		};
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb5_frp_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_typea_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-el2.dtso b/arch/arm64/boot/dts/qcom/x1-el2.dtso
new file mode 100644
index 000000000000..2d1c9151cf1b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-el2.dtso
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * x1 specific modifications required to boot in EL2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */
+&gpu_zap_shader {
+	status = "disabled";
+};
+
+&iris {
+	/* TODO: Add video-firmware iommus to start IRIS from EL2 */
+	status = "disabled";
+};
+
+/*
+ * When running under Gunyah, this IOMMU is controlled by the firmware,
+ * however when we take ownership of it in EL2, we need to configure
+ * it properly to use PCIe.
+ *
+ * Additionally, it seems like ITS emulation in Gunyah is broken so we
+ * can't use MSI on some PCIe controllers in EL1. But we can add them
+ * here for EL2.
+ */
+&pcie3 {
+	iommu-map = <0 &pcie_smmu 0x30000 0x10000>;
+	msi-map = <0 &gic_its 0xb0000 0x10000>;
+};
+
+&pcie4 {
+	iommu-map = <0 &pcie_smmu 0x40000 0x10000>;
+};
+
+&pcie5 {
+	iommu-map = <0 &pcie_smmu 0x50000 0x10000>;
+	msi-map = <0 &gic_its 0xd0000 0x10000>;
+};
+
+&pcie6a {
+	iommu-map = <0 &pcie_smmu 0x60000 0x10000>;
+};
+
+&pcie_smmu {
+	status = "okay";
+};
+
+/*
+ * The "SBSA watchdog" is implemented in software in Gunyah
+ * and can't be used when running in EL2.
+ */
+&sbsa_watchdog {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
new file mode 100644
index 000000000000..a4075434162a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
@@ -0,0 +1,1544 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/ {
+	aliases {
+		serial0 = &uart21;
+		serial1 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmk8550_pwm 0 5000000>;
+
+		brightness-levels = <0 2048 4096 8192 16384 65535>;
+		num-interpolated-steps = <20>;
+		default-brightness-level = <80>;
+
+		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vreg_edp_bl>;
+
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+		pinctrl-names = "default";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Left-side port, closer to the screen */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side port, farther from the screen */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound: sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-HP-OMNIBOOK-X14";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS3",
+				"VA DMIC1", "VA MIC BIAS3",
+				"VA DMIC2", "VA MIC BIAS1",
+				"VA DMIC3", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_edp_bl: regulator-edp-bl {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VBL9";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_MISC_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&misc_3p3_reg_en>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg_vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	/*
+	 * TODO: These two regulators are actually part of the removable M.2
+	 * card and not the CRD mainboard. Need to describe this differently.
+	 * Functionally it works correctly, because all we need to do is to
+	 * turn on the actual 3.3V supply above.
+	 */
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_wcn_1p9>;
+		vddpcie1p3-supply = <&vreg_wcn_1p9>;
+		vddpcie1p9-supply = <&vreg_wcn_1p9>;
+		vddpmu-supply = <&vreg_wcn_0p95>;
+		vddpmumx-supply = <&vreg_wcn_0p95>;
+		vddpmucx-supply = <&vreg_wcn_0p95>;
+		vddrfa0p95-supply = <&vreg_wcn_0p95>;
+		vddrfa1p3-supply = <&vreg_wcn_1p9>;
+		vddrfa1p9-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
+
+	usb-1-ss1-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss1_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vreg_vph_pwr>;
+		vdd-bob2-supply = <&vreg_vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vreg_vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+		vdd-s2-supply = <&vreg_vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vreg_vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			backlight = <&backlight>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		drive-push-pull;
+		input-disable;
+		output-enable;
+		power-source = <1>; /* 1.8 V */
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		input-disable;
+		output-enable;
+	};
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio10";
+		function = "normal";
+	};
+
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmk8550_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio5";
+		function = "func3";
+	};
+};
+
+&pmk8550_pwm {
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WSA8845, Left Speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <72 2>, /* Secure EC I2C connection (?) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+		mode-pins {
+			pins = "gpio177";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio178";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+		max-speed = <3200000>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+	};
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_dwc3 {
+	phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>;
+	phy-names = "usb2-0", "usb3-0";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
new file mode 100644
index 000000000000..bfc649d4b643
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
@@ -0,0 +1,1500 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E001DE Snapdragon Devkit for Windows";
+	compatible = "qcom,x1e001de-devkit", "qcom,x1e001de", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		/* Back panel port closer to the RJ45 connector */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Back panel port closer to the audio jack */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "host";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Front panel port */
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "host";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss2_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss2_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E001DE-DEVKIT";
+		audio-routing = "IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr2_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr2_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr2_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDX_VPH_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcdxkmsuc8380.mbn";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+		vdd-supply = <&vreg_rtmr2_1p15>;
+		vdd33-supply = <&vreg_rtmr2_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+		vddar-supply = <&vreg_rtmr2_1p15>;
+		vddat-supply = <&vreg_rtmr2_1p15>;
+		vddio-supply = <&vreg_rtmr2_1p8>;
+
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr2_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss2_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss2_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss2_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie5 {
+	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-0 = <&pcie5_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie6a_default>;
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_en: usb0-pwr-1p15-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcadsp8380.mbn",
+			"qcom/x1e80100/Thundercomm/DEVKIT/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qccdsp8380.mbn",
+			"qcom/x1e80100/Thundercomm/DEVKIT/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l6b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+	status = "okay";
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <44 4>; /* SPI (TPM) */
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie5_default: pcie5-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie5_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio149";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_default: rtmr2-reset-n-active-state {
+		pins = "gpio185";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_1p15_reg_en: rtmr2-1p15-reg-en-state {
+		pins = "gpio189";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_1p8_reg_en: rtmr2-1p8-reg-en-state {
+		pins = "gpio126";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_3p3_reg_en: rtmr2-3p3-reg-en-state {
+		pins = "gpio187";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio221";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_2_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&retimer_ss2_ss_in>;
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts
new file mode 100644
index 000000000000..d524afa12d19
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Linaro Limited
+ */
+
+#include "x1e78100-lenovo-thinkpad-t14s.dtsi"
+
+/ {
+	model = "Lenovo ThinkPad T14s Gen 6 (OLED)";
+	compatible = "lenovo,thinkpad-t14s-oled", "lenovo,thinkpad-t14s",
+		     "qcom,x1e78100", "qcom,x1e80100";
+};
+
+&panel {
+	compatible = "samsung,atna40yk20", "samsung,atna33xc20";
+	enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&edp_bl_en>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
new file mode 100644
index 000000000000..5cc6a63d1ef6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Linaro Limited
+ */
+
+#include "x1e78100-lenovo-thinkpad-t14s.dtsi"
+
+/ {
+	model = "Lenovo ThinkPad T14s Gen 6 (LCD)";
+	compatible = "lenovo,thinkpad-t14s-lcd", "lenovo,thinkpad-t14s",
+		     "qcom,x1e78100", "qcom,x1e80100";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmk8550_pwm 0 4266537>;
+		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vreg_edp_bl>;
+
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+		pinctrl-names = "default";
+	};
+
+	vreg_edp_bl: regulator-edp-bl {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VBL9";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_reg_en>;
+
+		regulator-boot-on;
+	};
+};
+
+&panel {
+	backlight = <&backlight>;
+};
+
+&pmc8380_3_gpios {
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio10";
+		function = "normal";
+	};
+};
+
+&pmk8550_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio5";
+		function = "func3";
+	};
+};
+
+&pmk8550_pwm {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
new file mode 100644
index 000000000000..654cbce9d6ec
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
@@ -0,0 +1,1602 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	model = "Lenovo ThinkPad T14s Gen 6";
+	compatible = "lenovo,thinkpad-t14s", "qcom,x1e78100", "qcom,x1e80100";
+	chassis-type = "laptop";
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+		mux-controls = <&us_euro_mux_ctrl>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Display-adjacent port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* User-adjacent port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	/* two muxes together support CTIA and OMTP switching */
+	us_euro_mux_ctrl: mux-controller {
+		compatible = "gpio-mux";
+		pinctrl-0 = <&us_euro_hs_sel>;
+		pinctrl-names = "default";
+		mux-supply = <&vreg_l16b_2p5>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&misc_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN_RCM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-LENOVO-Thinkpad-T14s";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS1",
+				"VA DMIC1", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS1",
+				"VA DMIC1", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p5: ldo16 {
+			regulator-name = "vreg_l16b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/x1e80100/LENOVO/21N1/qcdxkmsuc8380.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&qup_i2c0_data_clk>, <&tpad_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* ELAN06E2 or ELAN06E3 */
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	/* SYNA8022 or SYNA8024 */
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	/* ELAN06F1 or SYNA06F2 */
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb5_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb5_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	embedded-controller@28 {
+		compatible = "lenovo,thinkpad-t14s-ec";
+		reg = <0x28>;
+
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ec_int_n_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* ILIT2911 or GTCH1563 */
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+
+	/* TODO: second-sourced touchscreen @ 0x41 */
+};
+
+&iris {
+	firmware-name = "qcom/x1e80100/LENOVO/21N1/qcvss8380.mbn";
+	status = "okay";
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel: panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie5 {
+	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-0 = <&pcie5_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		drive-push-pull;
+		input-disable;
+		output-enable;
+		power-source = <1>; /* 1.8 V */
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/LENOVO/21N1/qcadsp8380.mbn",
+			"qcom/x1e80100/LENOVO/21N1/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/LENOVO/21N1/qccdsp8380.mbn",
+			"qcom/x1e80100/LENOVO/21N1/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <72 2>, /* Secure EC I2C connection (?) */
+			       <238 1>; /* UFS Reset */
+
+	ec_int_n_default: ec-int-n-state {
+		pins = "gpio66";
+		function = "gpio";
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb5_reset_n: eusb5-reset-n-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts0_default: ts0-default-state {
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie5_default: pcie5-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie5_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio149";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	us_euro_hs_sel: us-euro-hs-sel-state {
+		pins = "gpio68";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio221";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+	};
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb5_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
new file mode 100644
index 000000000000..0113d856b3ad
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -0,0 +1,1003 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	model = "ASUS Vivobook S 15";
+	compatible = "asus,vivobook-s15", "qcom,x1e80100";
+	chassis-type = "laptop";
+
+	aliases {
+		serial1 = &uart14;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Left-side port, closer to the screen */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side port, farther from the screen */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * TODO: These two regulators are actually part of the removable M.2
+	 * card and not the CRD mainboard. Need to describe this differently.
+	 * Functionally it works correctly, because all we need to do is to
+	 * turn on the actual 3.3V supply above.
+	 */
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_en>, <&wcn_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* PS8830 USB4 Retimer? @ 0x8 */
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* PS8830 USB4 Retimer? @ 0x8 */
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	eusb5_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb5_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	/* EC @ 0x76 */
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* PS8830 USB4 Retimer? @ 0x8 */
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "samsung,atna56ac03", "samsung,atna33xc20";
+			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+			power-supply = <&vreg_edp_3p3>;
+
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
+		bias-pull-down;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn",
+			"qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn",
+			"qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	eusb5_reset_n: eusb5-reset-n-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-disable;
+	};
+
+	wcn_bt_en: wcn-bt-en-state {
+		pins = "gpio116";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-down;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	wcn_wlan_en: wcn-wlan-en-state {
+		pins = "gpio117";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb5_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts
new file mode 100644
index 000000000000..0d0bcc50207d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "x1e80100.dtsi"
+#include "x1-asus-zenbook-a14.dtsi"
+
+/ {
+	model = "ASUS Zenbook A14 (UX3407RA)";
+	compatible = "asus,zenbook-a14-ux3407ra", "qcom,x1e80100";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcdxkmsuc8380.mbn";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcadsp8380.mbn",
+			"qcom/x1e80100/ASUSTeK/zenbook-a14/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qccdsp8380.mbn",
+			"qcom/x1e80100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
new file mode 100644
index 000000000000..dfc378e1a056
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "x1e80100.dtsi"
+#include "x1-crd.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 CRD";
+	compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
+};
+
+&iris {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts
new file mode 100644
index 000000000000..cf2a7c262888
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Val Packett <val@packett.cool>
+ */
+/dts-v1/;
+
+#include "x1e80100.dtsi"
+#include "x1-dell-thena.dtsi"
+
+/ {
+	model = "Dell Inspiron 14 Plus 7441";
+	compatible = "dell,inspiron-14-plus-7441", "qcom,x1e80100";
+};
+
+&sound {
+	model = "X1E80100-Dell-Inspiron-14p-7441";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcdxkmsuc8380.mbn";
+};
+
+&i2c8 {
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&iris {
+	firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcvss8380.mbn";
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcadsp8380.mbn",
+			"qcom/x1e80100/dell/inspiron-14-plus-7441/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qccdsp8380.mbn",
+			"qcom/x1e80100/dell/inspiron-14-plus-7441/cdsp_dtbs.elf";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts
new file mode 100644
index 000000000000..32ad9679550e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Val Packett <val@packett.cool>
+ */
+/dts-v1/;
+
+#include "x1e80100.dtsi"
+#include "x1-dell-thena.dtsi"
+
+/ {
+	model = "Dell Latitude 7455";
+	compatible = "dell,latitude-7455", "qcom,x1e80100";
+};
+
+&sound {
+	model = "X1E80100-Dell-Latitude-7455";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/dell/latitude-7455/qcdxkmsuc8380.mbn";
+};
+
+&i2c8 {
+	/* LXST2021 */
+	touchscreen@9 {
+		compatible = "hid-over-i2c";
+		reg = <0x09>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&iris {
+	firmware-name = "qcom/x1e80100/dell/latitude-7455/qcvss8380.mbn";
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/dell/latitude-7455/qcadsp8380.mbn",
+			"qcom/x1e80100/dell/latitude-7455/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/dell/latitude-7455/qccdsp8380.mbn",
+			"qcom/x1e80100/dell/latitude-7455/cdsp_dtbs.elf";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
new file mode 100644
index 000000000000..58f8caaa7258
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
@@ -0,0 +1,1373 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	model = "Dell XPS 13 9345";
+	compatible = "dell,xps13-9345", "qcom,x1e80100";
+	chassis-type = "laptop";
+
+	aliases {
+		serial0 = &uart21;
+		serial1 = &uart14;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_indicator_en>;
+
+		led-camera-indicator {
+			label = "white:camera-indicator";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			/* Reuse as a panic indicator until we get a "camera on" trigger */
+			panic-indicator;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Right-side USB Type-C port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side USB Type-C port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+		vdd-bob1-supply = <&vreg_vph_pwr>;
+		vdd-bob2-supply = <&vreg_vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p9: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+		vdd-s2-supply = <&vreg_vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vreg_vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p9: ldo1 {
+			regulator-name = "vreg_l1j_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/x1e80100/dell/xps13-9345/qcdxkmsuc8380.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	keyboard@5 {
+		compatible = "hid-over-i2c";
+		reg = <0x5>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* Right-side USB Type-C port */
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <100000>;
+	status = "disabled";
+	/* EC @0x3b */
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* Left-side USB Type-C port */
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c9 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c17 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&iris {
+	firmware-name = "qcom/x1e80100/dell/xps13-9345/qcvss8380.mbn";
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			enable-gpios = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+			power-supply = <&vreg_edp_3p3>;
+
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+
+	rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+};
+
+&pmc8380_5_gpios {
+	rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+};
+
+&pm8550ve_9_gpios {
+	rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/dell/xps13-9345/qcadsp8380.mbn",
+			"qcom/x1e80100/dell/xps13-9345/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/dell/xps13-9345/qccdsp8380.mbn",
+			"qcom/x1e80100/dell/xps13-9345/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <44 4>,  /* SPI11 (TPM) */
+			       <76 4>,  /* SPI19 (TZ Protected) */
+			       <238 1>; /* UFS Reset */
+
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio74";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tpad_default: tpad-default-state {
+		disable-pins {
+			pins = "gpio38";
+			function = "gpio";
+			output-high;
+		};
+
+		int-n-pins {
+			pins = "gpio3";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio52";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	ts0_default: ts0-default-state {
+		disable-pins {
+			pins = "gpio75";
+			function = "gpio";
+			output-high;
+		};
+
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			/* Technically should be High-Z input */
+			pins = "gpio48";
+			function = "gpio";
+			output-low;
+			drive-strength = <2>;
+		};
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p9>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p9>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts
new file mode 100644
index 000000000000..4ea00d823693
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "x1e80100-hp-omnibook-x14.dts"
+
+/ {
+	model = "HP EliteBook Ultra G1q";
+	compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100";
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn";
+	};
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcadsp8380.mbn",
+			"qcom/x1e80100/hp/elitebook-ultra-g1q/adsp_dtbs.elf";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qccdsp8380.mbn",
+			"qcom/x1e80100/hp/elitebook-ultra-g1q/cdsp_dtbs.elf";
+};
+
+&sound {
+	model = "X1E80100-HP-ELITEBOOK-ULTRA-G1Q";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
new file mode 100644
index 000000000000..e5a839d45840
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+#include "x1-hp-omnibook-x14.dtsi"
+
+/ {
+	model = "HP Omnibook X 14-fe0";
+	compatible = "hp,omnibook-x14", "qcom,x1e80100";
+	chassis-type = "laptop";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcadsp8380.mbn",
+			"qcom/x1e80100/hp/omnibook-x14/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qccdsp8380.mbn",
+			"qcom/x1e80100/hp/omnibook-x14/cdsp_dtbs.elf";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
new file mode 100644
index 000000000000..e0642fe8343f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -0,0 +1,1649 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	model = "Lenovo Yoga Slim 7x";
+	compatible = "lenovo,yoga-slim7x", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+		serial1 = &uart14;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		/* Left-side rear port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side front port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Right-side port */
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss2_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss2_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-LENOVO-Yoga-Slim7x";
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+				"VA DMIC0", "vdd-micb",
+				"VA DMIC1", "vdd-micb",
+				"VA DMIC2", "vdd-micb",
+				"VA DMIC3", "vdd-micb";
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_woofer>, <&left_tweeter>,
+					    <&swr0 0>, <&lpass_wsamacro 0>,
+					    <&right_woofer>, <&right_tweeter>,
+					    <&swr3 0>, <&lpass_wsa2macro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	/*
+	 * TODO: These two regulators are actually part of the removable M.2
+	 * card and not the CRD mainboard. Need to describe this differently.
+	 * Functionally it works correctly, because all we need to do is to
+	 * turn on the actual 3.3V supply above.
+	 */
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+		vdd-supply = <&vreg_rtmr2_1p15>;
+		vdd33-supply = <&vreg_rtmr2_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+		vddar-supply = <&vreg_rtmr2_1p15>;
+		vddat-supply = <&vreg_rtmr2_1p15>;
+		vddio-supply = <&vreg_rtmr2_1p8>;
+
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr2_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss2_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss2_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss2_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchscreen@14 {
+		compatible = "hid-over-i2c";
+		reg = <0x14>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&iris {
+	firmware-name = "qcom/x1e80100/LENOVO/83ED/qcvss8380.mbn";
+	status = "okay";
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "samsung,atna45dc02", "samsung,atna33xc20";
+			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+			power-supply = <&vreg_edp_3p3>;
+
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <0>;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/LENOVO/83ED/qcadsp8380.mbn",
+			"qcom/x1e80100/LENOVO/83ED/adsp_dtbs.elf";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/LENOVO/83ED/qccdsp8380.mbn",
+			"qcom/x1e80100/LENOVO/83ED/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+	status = "okay";
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Woofer */
+	left_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Left Tweeter */
+	left_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+
+&swr3 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Right Woofer */
+	right_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Tweeter */
+	right_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		lid-n-pins {
+			pins = "gpio92";
+			function = "gpio";
+			bias-disable;
+		};
+
+		/*
+		 * Pins 71 and 92 seem to be bridged together (pin 71 and 92 show the same
+		 * events). By default, pin 71 is set as output-high, which blocks any
+		 * event on pin 92. Output-disable on pin 71 is necessary to get events on
+		 * pin 92.
+		 * The purpose of pin 71 is not yet known; lid-pull is a supposition.
+		 */
+		lid-pull-n-pins {
+			pins = "gpio71";
+			function = "gpio";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_default: rtmr2-reset-n-active-state {
+		pins = "gpio185";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-disable;
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
+		pins = "gpio189";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
+		pins = "gpio126";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
+		pins = "gpio187";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_2_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&retimer_ss2_ss_in>;
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
new file mode 100644
index 000000000000..ed468b93ba50
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
@@ -0,0 +1,1577 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart2;
+		i2c0 = &i2c0;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c7 = &i2c7;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+
+		vdd-buck-supply = <&vreg_l15b>;
+		vdd-rxtx-supply = <&vreg_l15b>;
+		vdd-io-supply = <&vreg_l15b>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		#sound-dai-cells = <1>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmk8550_pwm 0 5000000>;
+		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+		/* TODO: power-supply? */
+
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+		pinctrl-names = "default";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_indicator_en>;
+
+		led-camera-indicator {
+			label = "white:camera-indicator";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&tlmm 225 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			/* Reuse as a panic indicator until we get a "camera on" trigger */
+			panic-indicator;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+
+		/* Left-side rear port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side front port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-Romulus";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC0", "VA MIC BIAS3",
+				"VA DMIC1", "VA MIC BIAS3",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>,
+					    <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j>;
+		vdd-l15-supply = <&vreg_s4c>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b: ldo1 {
+			regulator-name = "vreg_l1b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b: ldo2 {
+			regulator-name = "vreg_l2b";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b: ldo4 {
+			regulator-name = "vreg_l4b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b: ldo5 {
+			regulator-name = "vreg_l5b";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b: ldo7 {
+			regulator-name = "vreg_l7b";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b: ldo8 {
+			regulator-name = "vreg_l8b";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b: ldo9 {
+			regulator-name = "vreg_l9b";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b: ldo10 {
+			regulator-name = "vreg_l10b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b: ldo12 {
+			regulator-name = "vreg_l12b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b: ldo13 {
+			regulator-name = "vreg_l13b";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b: ldo14 {
+			regulator-name = "vreg_l14b";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b: ldo15 {
+			regulator-name = "vreg_l15b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b: ldo16 {
+			regulator-name = "vreg_l16b";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b: ldo17 {
+			regulator-name = "vreg_l17b";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j>;
+		vdd-l2-supply = <&vreg_s1f>;
+		vdd-l3-supply = <&vreg_s1f>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c: smps4 {
+			regulator-name = "vreg_s4c";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f>;
+		vdd-l2-supply = <&vreg_s1f>;
+		vdd-l3-supply = <&vreg_s4c>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d: ldo1 {
+			regulator-name = "vreg_l1d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d: ldo2 {
+			regulator-name = "vreg_l2d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d: ldo3 {
+			regulator-name = "vreg_l3d";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f>;
+		vdd-l3-supply = <&vreg_s5j>;
+
+		vreg_l2e: ldo2 {
+			regulator-name = "vreg_l2e";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e: ldo3 {
+			regulator-name = "vreg_l3e";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j>;
+		vdd-l2-supply = <&vreg_s5j>;
+		vdd-l3-supply = <&vreg_s5j>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f: smps1 {
+			regulator-name = "vreg_s1f";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f: ldo1 {
+			regulator-name = "vreg_l1f";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f: ldo2 {
+			regulator-name = "vreg_l2f";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f: ldo3 {
+			regulator-name = "vreg_l3f";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c>;
+		vdd-l2-supply = <&vreg_s5j>;
+		vdd-l3-supply = <&vreg_s1f>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i: smps1 {
+			regulator-name = "vreg_s1i";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i: smps2 {
+			regulator-name = "vreg_s2i";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i: ldo1 {
+			regulator-name = "vreg_l1i";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i: ldo2 {
+			regulator-name = "vreg_l2i";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i: ldo3 {
+			regulator-name = "vreg_l3i";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f>;
+		vdd-l2-supply = <&vreg_s5j>;
+		vdd-l3-supply = <&vreg_s1f>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j: smps5 {
+			regulator-name = "vreg_s5j";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j: ldo1 {
+			regulator-name = "vreg_l1j";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j: ldo2 {
+			regulator-name = "vreg_l2j";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j: ldo3 {
+			regulator-name = "vreg_l3j";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_microcode_mem>;
+		firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	/* Something @39, @3e, @44 */
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* Left-side rear port */
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* Something @18, @2c, @2e */
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	ptn3222: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+		vdd3v3-supply = <&vreg_l13b>;
+		vdd1v8-supply = <&vreg_l4b>;
+
+		#phy-cells = <0>;
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* Left-side front port */
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	qcom,dmic-sample-rate = <4800000>;
+
+	vdd-micb-supply = <&vreg_l1b>;
+
+	pinctrl-0 = <&dmic01_default>;
+	pinctrl-names = "default";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+
+			backlight = <&backlight>;
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j>;
+	vdda-pll-supply = <&vreg_l2j>;
+
+	status = "okay";
+};
+
+&pcie3 {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie3_default>;
+	pinctrl-names = "default";
+
+	/* The RTS5261 chip on the other side only does Gen1x1 anyway */
+	max-link-speed = <1>;
+	status = "okay";
+};
+
+&pcie3_phy {
+	vdda-phy-supply = <&vreg_l3c>;
+	vdda-pll-supply = <&vreg_l3e>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i>;
+	vdda-pll-supply = <&vreg_l3e>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d>;
+	vdda-pll-supply = <&vreg_l2j>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+
+	rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+};
+
+&pm8550ve_9_gpios {
+	rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+};
+
+&pmk8550_pwm {
+	status = "okay";
+};
+
+&pmk8550_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio5";
+		function = "func3";
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/microsoft/Romulus/qcadsp8380.mbn",
+			"qcom/x1e80100/microsoft/Romulus/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/microsoft/Romulus/qccdsp8380.mbn",
+			"qcom/x1e80100/microsoft/Romulus/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d>;
+	vdd3-supply = <&vreg_l2b>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d>;
+	vdd3-supply = <&vreg_l14b>;
+};
+
+&smb2360_2 {
+	status = "okay";
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d>;
+	vdd3-supply = <&vreg_l8b>;
+};
+
+&swr0 {
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WSA8845, Left speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b>;
+		vdd-io-supply = <&vreg_l12b>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b>;
+		vdd-io-supply = <&vreg_l12b>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio2";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	ssam_state: ssam-state-state {
+		pins = "gpio91";
+		function = "gpio";
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie3_default: pcie3-default-state {
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		clkreq-n-pins {
+			pins = "gpio144";
+			function = "pcie3_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio225";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart2 {
+	status = "okay";
+
+	embedded-controller {
+		compatible = "microsoft,surface-sam";
+
+		interrupts-extended = <&tlmm 91 IRQ_TYPE_EDGE_RISING>;
+
+		current-speed = <4000000>;
+
+		pinctrl-0 = <&ssam_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j>;
+	vdda12-supply = <&vreg_l2j>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j>;
+	vdda-pll-supply = <&vreg_l1j>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j>;
+	vdda12-supply = <&vreg_l2j>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j>;
+	vdda-pll-supply = <&vreg_l2d>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+/* MP0 goes to the Surface Connector, MP1 goes to the USB-A port */
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e>;
+	vdda12-supply = <&vreg_l2j>;
+
+	phys = <&smb2360_2_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e>;
+	vdda12-supply = <&vreg_l2j>;
+
+	phys = <&ptn3222>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e>;
+	vdda-pll-supply = <&vreg_l3c>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e>;
+	vdda-pll-supply = <&vreg_l3c>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus13.dts b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus13.dts
new file mode 100644
index 000000000000..eb7580dd9684
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus13.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "x1e80100-microsoft-romulus.dtsi"
+
+/ {
+	model = "Microsoft Surface Laptop 7 (13.8 inch)";
+	compatible = "microsoft,romulus13", "qcom,x1e80100";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus15.dts b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus15.dts
new file mode 100644
index 000000000000..4751ad9b510b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus15.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "x1e80100-microsoft-romulus.dtsi"
+
+/ {
+	model = "Microsoft Surface Laptop 7 (15 inch)";
+	compatible = "microsoft,romulus15", "qcom,x1e80100";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
new file mode 100644
index 000000000000..621890ada153
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8550-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550ve-2-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_2_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pmc8380-3-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmc8380_3_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pmc8380-4-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmc8380_4_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pmc8380-5-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmc8380_5_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pmc8380_6_thermal: pmc8380-6-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmc8380_6_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550ve-8-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_8_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550ve-9-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_9_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8010-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8010_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus0 {
+	/* PMK8380 */
+	pmk8550: pmic@0 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmk8550_pon: pon@1300 {
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				status = "disabled";
+			};
+		};
+
+		pmk8550_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			qcom,no-alarm; /* alarm owned by ADSP */
+			qcom,uefi-rtc-info;
+		};
+
+		pmk8550_sdam_2: nvram@7100 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7100 0x100>;
+
+			reboot_reason: reboot-reason@48 {
+				reg = <0x48 0x1>;
+				bits = <1 7>;
+			};
+		};
+
+		pmk8550_gpios: gpio@8800 {
+			compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio";
+			reg = <0xb800>;
+			gpio-controller;
+			gpio-ranges = <&pmk8550_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmk8550_pwm: pwm {
+			compatible = "qcom,pmk8550-pwm";
+
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+
+	/* PMC8380C */
+	pm8550: pmic@1 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550_gpios: gpio@8800 {
+			compatible = "qcom,pm8550-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8550_flash: led-controller@ee00 {
+			compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led";
+			reg = <0xee00>;
+			status = "disabled";
+		};
+
+		pm8550_pwm: pwm {
+			compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+
+	/* PMC8380VE */
+	pm8550ve_2: pmic@2 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_2_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_2_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_2_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	/* PMC8380 is actually not a PM8550 series rebrand */
+	pmc8380_3: pmic@3 {
+		compatible = "qcom,pmc8380", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmc8380_3_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8380_3_gpios: gpio@8800 {
+			compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8380_3_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmc8380_4: pmic@4 {
+		compatible = "qcom,pmc8380", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmc8380_4_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8380_4_gpios: gpio@8800 {
+			compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8380_4_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmc8380_5: pmic@5 {
+		compatible = "qcom,pmc8380", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmc8380_5_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8380_5_gpios: gpio@8800 {
+			compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8380_5_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmc8380_6: pmic@6 {
+		compatible = "qcom,pmc8380", "qcom,spmi-pmic";
+		reg = <0x6 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmc8380_6_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8380_6_gpios: gpio@8800 {
+			compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8380_6_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	/* PMC8380VE */
+	pm8550ve_8: pmic@8 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x8 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_8_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_8_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_8_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	/* PMC8380VE */
+	pm8550ve_9: pmic@9 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x9 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_9_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_9_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_9_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8010: pmic@c {
+		compatible = "qcom,pm8010", "qcom,spmi-pmic";
+		reg = <0xc SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+
+		pm8010_temp_alarm: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+};
+
+&spmi_bus1 {
+	smb2360_0: pmic@7 {
+		compatible = "qcom,smb2360", "qcom,spmi-pmic";
+		reg = <0x7 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+
+		smb2360_0_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,smb2360-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+
+	smb2360_1: pmic@a {
+		compatible = "qcom,smb2360", "qcom,spmi-pmic";
+		reg = <0xa SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+
+		smb2360_1_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,smb2360-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+
+	smb2360_2: pmic@b {
+		compatible = "qcom,smb2360", "qcom,spmi-pmic";
+		reg = <0xb SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+
+		smb2360_2_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,smb2360-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+
+	smb2360_3: pmic@c {
+		compatible = "qcom,smb2360", "qcom,spmi-pmic";
+		reg = <0xc SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+
+		smb2360_3_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,smb2360-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
new file mode 100644
index 000000000000..4a9b6d791e7f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -0,0 +1,1536 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 QCP";
+	compatible = "qcom,x1e80100-qcp", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+		serial1 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss1_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss2_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-QCP";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>,
+					    <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_pcie_12v: regulator-pcie-12v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+
+		gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&pcie_x8_12v>;
+		pinctrl-names = "default";
+	};
+
+	vreg_pcie_3v3_aux: regulator-pcie-3v3-aux {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_3P3_AUX";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8380_3_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&pm_sde7_aux_3p3_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_pcie_3v3: regulator-pcie-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8380_3_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&pm_sde7_main_3p3_en>;
+		pinctrl-names = "default";
+};
+
+	usb-1-ss0-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 168 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 167 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss0_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss0_sbu>;
+			};
+		};
+	};
+
+	usb-1-ss1-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss1_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss1_sbu>;
+			};
+		};
+	};
+
+	usb-1-ss2-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 171 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 170 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss2_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss2_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss2_sbu>;
+			};
+		};
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550ve_8_gpios {
+	pcie_x8_12v: pcie-12v-default-state {
+		pins = "gpio8";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+};
+
+&pmc8380_3_gpios {
+	pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state {
+		pins = "gpio8";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+
+	pm_sde7_main_3p3_en: pcie-main-3p3-default-state {
+		pins = "gpio6";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+};
+
+&pcie3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_default>;
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie3_phy {
+	vdda-phy-supply = <&vreg_l3c_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie3_port {
+	vpcie12v-supply = <&vreg_pcie_12v>;
+	vpcie3v3-supply = <&vreg_pcie_3v3>;
+	vpcie3v3aux-supply = <&vreg_pcie_3v3_aux>;
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie6a_default>;
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/adsp.mbn",
+			"qcom/x1e80100/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/cdsp.mbn",
+			"qcom/x1e80100/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l6b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+	status = "okay";
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
+&smb2360_3 {
+	status = "okay";
+};
+
+&swr0 {
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WSA8845, Left Speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		#sound-dai-cells = <0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		#sound-dai-cells = <0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <33 3>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie3_default: pcie3-default-state {
+		clkreq-n-pins {
+			pins = "gpio144";
+			function = "pcie3_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+		mode-pins {
+			pins = "gpio166";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio168";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+	};
+
+	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+		mode-pins {
+			pins = "gpio177";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio178";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
+	usb_1_ss2_sbu_default: usb-1-ss2-sbu-state {
+		mode-pins {
+			pins = "gpio169";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio171";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio170";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_2_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss2_ss_in>;
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
new file mode 100644
index 000000000000..51576d9c935d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -0,0 +1,9550 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+#include <dt-bindings/clock/qcom,sm8450-videocc.h>
+#include <dt-bindings/clock/qcom,x1e80100-dispcc.h>
+#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+#include <dt-bindings/clock/qcom,x1e80100-gpucc.h>
+#include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd0>, <&scmi_dvfs 0>;
+			power-domain-names = "psci", "perf";
+			cpu-idle-states = <&cluster_c4>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd1>, <&scmi_dvfs 0>;
+			power-domain-names = "psci", "perf";
+			cpu-idle-states = <&cluster_c4>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd2>, <&scmi_dvfs 0>;
+			power-domain-names = "psci", "perf";
+			cpu-idle-states = <&cluster_c4>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd3>, <&scmi_dvfs 0>;
+			power-domain-names = "psci", "perf";
+			cpu-idle-states = <&cluster_c4>;
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&l2_1>;
+			power-domains = <&cpu_pd4>, <&scmi_dvfs 1>;
+			power-domain-names = "psci", "perf";
+			cpu-idle-states = <&cluster_c4>;
+
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_1>;
+			power-domains = <&cpu_pd5>, <&scmi_dvfs 1>;
+			power-domain-names = "psci", "perf";
+			cpu-idle-states = <&cluster_c4>;
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&l2_1>;
+			power-domains = <&cpu_pd6>, <&scmi_dvfs 1>;
+			power-domain-names = "psci", "perf";
+			cpu-idle-states = <&cluster_c4>;
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&l2_1>;
+			power-domains = <&cpu_pd7>, <&scmi_dvfs 1>;
+			power-domain-names = "psci", "perf";
+			cpu-idle-states = <&cluster_c4>;
+		};
+
+		cpu8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+			next-level-cache = <&l2_2>;
+			power-domains = <&cpu_pd8>, <&scmi_dvfs 2>;
+			power-domain-names = "psci", "perf";
+			cpu-idle-states = <&cluster_c4>;
+
+			l2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		cpu9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_2>;
+			power-domains = <&cpu_pd9>, <&scmi_dvfs 2>;
+			power-domain-names = "psci", "perf";
+			cpu-idle-states = <&cluster_c4>;
+		};
+
+		cpu10: cpu@20200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20200>;
+			enable-method = "psci";
+			next-level-cache = <&l2_2>;
+			power-domains = <&cpu_pd10>, <&scmi_dvfs 2>;
+			power-domain-names = "psci", "perf";
+			cpu-idle-states = <&cluster_c4>;
+		};
+
+		cpu11: cpu@20300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20300>;
+			enable-method = "psci";
+			next-level-cache = <&l2_2>;
+			power-domains = <&cpu_pd11>, <&scmi_dvfs 2>;
+			power-domain-names = "psci", "perf";
+			cpu-idle-states = <&cluster_c4>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+
+			cpu_map_cluster2: cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+
+				core1 {
+					cpu = <&cpu9>;
+				};
+
+				core2 {
+					cpu = <&cpu10>;
+				};
+
+				core3 {
+					cpu = <&cpu11>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cluster_c4: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret";
+				arm,psci-suspend-param = <0x00000004>;
+				entry-latency-us = <180>;
+				exit-latency-us = <500>;
+				min-residency-us = <600>;
+			};
+		};
+
+		domain-idle-states {
+			cluster_cl4: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x01000044>;
+				entry-latency-us = <350>;
+				exit-latency-us = <500>;
+				min-residency-us = <2500>;
+			};
+
+			cluster_cl5: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x01000054>;
+				entry-latency-us = <2200>;
+				exit-latency-us = <4000>;
+				min-residency-us = <7000>;
+			};
+		};
+	};
+
+	dummy-sink {
+		compatible = "arm,coresight-dummy-sink";
+
+		in-ports {
+			port {
+				eud_in: endpoint {
+					remote-endpoint = <&swao_rep_out1>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-x1e80100", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			qcom,dload-mode = <&tcsr 0x19000>;
+		};
+
+		scmi {
+			compatible = "arm,scmi";
+			mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>;
+			mbox-names = "tx", "rx";
+			shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_dvfs: protocol@13 {
+				reg = <0x13>;
+				#power-domain-cells = <1>;
+			};
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,x1e80100-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,x1e80100-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+		};
+
+		cpu_pd4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+		};
+
+		cpu_pd5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+		};
+
+		cpu_pd6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+		};
+
+		cpu_pd7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+		};
+
+		cpu_pd8: power-domain-cpu8 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd2>;
+		};
+
+		cpu_pd9: power-domain-cpu9 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd2>;
+		};
+
+		cpu_pd10: power-domain-cpu10 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd2>;
+		};
+
+		cpu_pd11: power-domain-cpu11 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd2>;
+		};
+
+		cluster_pd0: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_cl4>, <&cluster_cl5>;
+			power-domains = <&system_pd>;
+		};
+
+		cluster_pd1: power-domain-cpu-cluster1 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_cl4>, <&cluster_cl5>;
+			power-domains = <&system_pd>;
+		};
+
+		cluster_pd2: power-domain-cpu-cluster2 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_cl4>, <&cluster_cl5>;
+			power-domains = <&system_pd>;
+		};
+
+		system_pd: power-domain-system {
+			#power-domain-cells = <0>;
+			/* TODO: system-wide idle states */
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gunyah_hyp_mem: gunyah-hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0x800000>;
+			no-map;
+		};
+
+		hyp_elf_package_mem: hyp-elf-package@80800000 {
+			reg = <0x0 0x80800000 0x0 0x200000>;
+			no-map;
+		};
+
+		ncc_mem: ncc@80a00000 {
+			reg = <0x0 0x80a00000 0x0 0x400000>;
+			no-map;
+		};
+
+		cpucp_log_mem: cpucp-log@80e00000 {
+			reg = <0x0 0x80e00000 0x0 0x40000>;
+			no-map;
+		};
+
+		cpucp_mem: cpucp@80e40000 {
+			reg = <0x0 0x80e40000 0x0 0x540000>;
+			no-map;
+		};
+
+		reserved-region@81380000 {
+			reg = <0x0 0x81380000 0x0 0x80000>;
+			no-map;
+		};
+
+		tags_mem: tags-region@81400000 {
+			reg = <0x0 0x81400000 0x0 0x1a0000>;
+			no-map;
+		};
+
+		xbl_dtlog_mem: xbl-dtlog@81a00000 {
+			reg = <0x0 0x81a00000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@81a40000 {
+			reg = <0x0 0x81a40000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@81c00000 {
+			reg = <0x0 0x81c00000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x81c60000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config@81c80000 {
+			reg = <0x0 0x81c80000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: tme-crash-dump@81ca0000 {
+			reg = <0x0 0x81ca0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log@81ce0000 {
+			reg = <0x0 0x81ce0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log@81ce4000 {
+			reg = <0x0 0x81ce4000 0x0 0x10000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss@81cff000 {
+			reg = <0x0 0x81cff000 0x0 0x1000>;
+			no-map;
+		};
+
+		pdp_ns_shared_mem: pdp-ns-shared@81e00000 {
+			reg = <0x0 0x81e00000 0x0 0x100000>;
+			no-map;
+		};
+
+		gpu_prr_mem: gpu-prr@81f00000 {
+			reg = <0x0 0x81f00000 0x0 0x10000>;
+			no-map;
+		};
+
+		tpm_control_mem: tpm-control@81f10000 {
+			reg = <0x0 0x81f10000 0x0 0x10000>;
+			no-map;
+		};
+
+		usb_ucsi_shared_mem: usb-ucsi-shared@81f20000 {
+			reg = <0x0 0x81f20000 0x0 0x10000>;
+			no-map;
+		};
+
+		pld_pep_mem: pld-pep@81f30000 {
+			reg = <0x0 0x81f30000 0x0 0x6000>;
+			no-map;
+		};
+
+		pld_gmu_mem: pld-gmu@81f36000 {
+			reg = <0x0 0x81f36000 0x0 0x1000>;
+			no-map;
+		};
+
+		pld_pdp_mem: pld-pdp@81f37000 {
+			reg = <0x0 0x81f37000 0x0 0x1000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0x0 0x82700000 0x0 0x100000>;
+			no-map;
+		};
+
+		xbl_tmp_buffer_mem: xbl-tmp-buffer@82800000 {
+			reg = <0x0 0x82800000 0x0 0xc00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@84b00000 {
+			reg = <0x0 0x84b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		spu_secure_shared_memory_mem: spu-secure-shared-memory@85300000 {
+			reg = <0x0 0x85300000 0x0 0x80000>;
+			no-map;
+		};
+
+		adsp_boot_dtb_mem: adsp-boot-dtb@866c0000 {
+			reg = <0x0 0x866c0000 0x0 0x40000>;
+			no-map;
+		};
+
+		spss_region_mem: spss-region@86700000 {
+			reg = <0x0 0x86700000 0x0 0x400000>;
+			no-map;
+		};
+
+		adsp_boot_mem: adsp-boot@86b00000 {
+			reg = <0x0 0x86b00000 0x0 0xc00000>;
+			no-map;
+		};
+
+		video_mem: video@87700000 {
+			reg = <0x0 0x87700000 0x0 0x700000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@87e00000 {
+			reg = <0x0 0x87e00000 0x0 0x3a00000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0x80000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@8b900000 {
+			reg = <0x0 0x8b900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@8d900000 {
+			reg = <0x0 0x8d900000 0x0 0x80000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8d9fe000 {
+			reg = <0x0 0x8d9fe000 0x0 0x2000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8da00000 {
+			reg = <0x0 0x8da00000 0x0 0x700000>;
+			no-map;
+		};
+
+		camera_mem: camera@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x800000>;
+			no-map;
+		};
+
+		av1_encoder_mem: av1-encoder@8e900000 {
+			reg = <0x0 0x8e900000 0x0 0x700000>;
+			no-map;
+		};
+
+		reserved-region@8f000000 {
+			reg = <0x0 0x8f000000 0x0 0xa00000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@8fa00000 {
+			reg = <0x0 0x8fa00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		q6_wpss_dtb_mem: q6-wpss-dtb@91300000 {
+			reg = <0x0 0x91300000 0x0 0x80000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc@d8000000 {
+			reg = <0x0 0xd8000000 0x0 0x40000>;
+			no-map;
+		};
+
+		reserved-region@d8040000 {
+			reg = <0x0 0xd8040000 0x0 0xa0000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@d80e0000 {
+			reg = <0x0 0xd80e0000 0x0 0x520000>;
+			no-map;
+		};
+
+		ta_mem: ta@d8600000 {
+			reg = <0x0 0xd8600000 0x0 0x8a00000>;
+			no-map;
+		};
+
+		tags_mem1: tags@e1000000 {
+			reg = <0x0 0xe1000000 0x0 0x26a0000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0x0 0xff800000 0x0 0x600000>;
+			no-map;
+		};
+
+		smem_mem: smem@ffe00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0xffe00000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+	};
+
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_120mhz: opp-table-qup120mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,x1e80100-gcc";
+			reg = <0 0x00100000 0 0x200000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&sleep_clk>,
+				 <&pcie3_phy>,
+				 <&pcie4_phy>,
+				 <&pcie5_phy>,
+				 <&pcie6a_phy>,
+				 <0>,
+				 <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+				 <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+				 <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,x1e80100-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c16: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c16_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi16: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c17: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c17_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi17: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c18: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c18_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi18: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c19: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c19_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi19: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c20: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c20_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi20: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c21: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c21_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi21: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart21: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				pinctrl-0 = <&qup_uart21_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			i2c22: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c22_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi22: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c23: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c23_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi23: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 777 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 779 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x136 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x123 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart14: serial@a98000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				pinctrl-0 = <&qup_uart14_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma0: dma-controller@b00000  {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00b00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x456 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_0: geniqup@bc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00bc0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x443 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@b80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@b80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@b84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@b84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@b88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart2: serial@b88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00b88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				pinctrl-0 = <&qup_uart2_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			spi2: spi@b88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@b8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@b8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@b90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@b90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@b94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@b94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@b98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@b98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@b9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi7: spi@b9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		tsens0: thermal-sensor@c271000 {
+			compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c271000 0 0x1000>,
+			      <0 0x0c222000 0 0x1000>;
+
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c272000 {
+			compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c272000 0 0x1000>,
+			      <0 0x0c223000 0 0x1000>;
+
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens2: thermal-sensor@c273000 {
+			compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c273000 0 0x1000>,
+			      <0 0x0c224000 0 0x1000>;
+
+			interrupts-extended = <&pdc 28 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens3: thermal-sensor@c274000 {
+			compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c274000 0 0x1000>,
+			      <0 0x0c225000 0 0x1000>;
+
+			interrupts-extended = <&pdc 29 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		usb_1_ss0_hsphy: phy@fd3000 {
+			compatible = "qcom,x1e80100-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x00fd3000 0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_1_ss0_qmpphy: phy@fd5000 {
+			compatible = "qcom,x1e80100-qmp-usb3-dp-phy";
+			reg = <0 0x00fd5000 0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			power-domains = <&gcc GCC_USB_0_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB4_0_DP0_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			mode-switch;
+			orientation-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_ss0_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_ss0_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_ss0_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
+					};
+				};
+			};
+		};
+
+		usb_1_ss1_hsphy: phy@fd9000 {
+			compatible = "qcom,x1e80100-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x00fd9000 0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_1_ss1_qmpphy: phy@fda000 {
+			compatible = "qcom,x1e80100-qmp-usb3-dp-phy";
+			reg = <0 0x00fda000 0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			power-domains = <&gcc GCC_USB_1_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB4_1_DP0_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			mode-switch;
+			orientation-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_ss1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_ss1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_ss1_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp1_out>;
+					};
+				};
+			};
+		};
+
+		usb_1_ss2_hsphy: phy@fde000 {
+			compatible = "qcom,x1e80100-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x00fde000 0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_TERT_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_1_ss2_qmpphy: phy@fdf000 {
+			compatible = "qcom,x1e80100-qmp-usb3-dp-phy";
+			reg = <0 0x00fdf000 0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_TERT_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_TERT_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			power-domains = <&gcc GCC_USB_2_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_TERT_BCR>,
+				 <&gcc GCC_USB4_2_DP0_PHY_TERT_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			mode-switch;
+			orientation-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_ss2_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_ss2_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_ss2_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp2_out>;
+					};
+				};
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,x1e80100-cnoc-main";
+			reg = <0 0x01500000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,x1e80100-cnoc-cfg";
+			reg = <0 0x01600000 0 0x6600>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,x1e80100-system-noc";
+			reg = <0 0x01680000 0 0x1c080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_south_anoc: interconnect@16c0000 {
+			compatible = "qcom,x1e80100-pcie-south-anoc";
+			reg = <0 0x016c0000 0 0xd080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_center_anoc: interconnect@16d0000 {
+			compatible = "qcom,x1e80100-pcie-center-anoc";
+			reg = <0 0x016d0000 0 0x7000>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,x1e80100-aggre1-noc";
+			reg = <0 0x016e0000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,x1e80100-aggre2-noc";
+			reg = <0 0x01700000 0 0x1c400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_north_anoc: interconnect@1740000 {
+			compatible = "qcom,x1e80100-pcie-north-anoc";
+			reg = <0 0x01740000 0 0x9080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_center_anoc: interconnect@1750000 {
+			compatible = "qcom,x1e80100-usb-center-anoc";
+			reg = <0 0x01750000 0 0x8800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_north_anoc: interconnect@1760000 {
+			compatible = "qcom,x1e80100-usb-north-anoc";
+			reg = <0 0x01760000 0 0x7080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_south_anoc: interconnect@1770000 {
+			compatible = "qcom,x1e80100-usb-south-anoc";
+			reg = <0 0x01770000 0 0xf080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,x1e80100-mmss-noc";
+			reg = <0 0x01780000 0 0x5B800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie3: pcie@1bd0000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-x1e80100";
+			reg = <0x0 0x01bd0000 0x0 0x3000>,
+			      <0x0 0x78000000 0x0 0xf20>,
+			      <0x0 0x78000f40 0x0 0xa8>,
+			      <0x0 0x78001000 0x0 0x1000>,
+			      <0x0 0x78100000 0x0 0x100000>,
+			      <0x0 0x01bd3000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x78200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x78300000 0x0 0x78300000 0x0 0x3d00000>,
+				 <0x03000000 0x7 0x40000000 0x7 0x40000000 0x0 0x40000000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <3>;
+			num-lanes = <8>;
+
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_3_AUX_CLK>,
+				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_3_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
+				 <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_north_anoc MASTER_PCIE_3 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_3 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_3_BCR>,
+				 <&gcc GCC_PCIE_3_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			power-domains = <&gcc GCC_PCIE_3_GDSC>;
+
+			phys = <&pcie3_phy>;
+			phy-names = "pciephy";
+
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555
+						     0x5555 0x5555 0x5555 0x5555>;
+			eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55 0x55 0x55 0x55 0x55>;
+
+			operating-points-v2 = <&pcie3_opp_table>;
+
+			status = "disabled";
+
+			pcie3_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 1 x4 and GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 1 x8 and GEN 2 x4 */
+				opp-20000000 {
+					opp-hz = /bits/ 64 <20000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <2000000 1>;
+				};
+
+				/* GEN 2 x8 */
+				opp-40000000 {
+					opp-hz = /bits/ 64 <40000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <4000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 and GEN 4 x1 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+				/* GEN 3 x4 and GEN 4 x2 */
+				opp-32000000 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <3938000 1>;
+				};
+
+				/* GEN 3 x8 and GEN 4 x4 */
+				opp-64000000 {
+					opp-hz = /bits/ 64 <64000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <7876000 1>;
+				};
+
+				/* GEN 4 x8 */
+				opp-128000000 {
+					opp-hz = /bits/ 64 <128000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <15753000 1>;
+				};
+			};
+
+			pcie3_port: pcie@0 {
+				device_type = "pci";
+				compatible = "pciclass,0604";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie3_phy: phy@1be0000 {
+			compatible = "qcom,x1e80100-qmp-gen4x8-pcie-phy";
+			reg = <0 0x01be0000 0 0x10000>;
+
+			clocks = <&gcc GCC_PCIE_3_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_8L_CLKREF_EN>,
+				 <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_3_PIPE_CLK>,
+				 <&gcc GCC_PCIE_3_PIPEDIV2_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe",
+				      "pipediv2";
+
+			resets = <&gcc GCC_PCIE_3_PHY_BCR>,
+				 <&gcc GCC_PCIE_3_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
+
+			assigned-clocks = <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc GCC_PCIE_3_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie3_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie6a: pci@1bf8000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-x1e80100";
+			reg = <0 0x01bf8000 0 0x3000>,
+			      <0 0x70000000 0 0xf20>,
+			      <0 0x70000f40 0 0xa8>,
+			      <0 0x70001000 0 0x1000>,
+			      <0 0x70100000 0 0x100000>,
+			      <0 0x01bfb000 0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <6>;
+			num-lanes = <4>;
+
+			msi-map = <0x0 &gic_its 0xe0000 0x10000>;
+
+			interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_6A_AUX_CLK>,
+				 <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_6A_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_6A_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_6A_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_SOUTH_AHB_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_6A_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_south_anoc MASTER_PCIE_6A QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_6A QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_6A_BCR>,
+				 <&gcc GCC_PCIE_6A_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			power-domains = <&gcc GCC_PCIE_6A_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			phys = <&pcie6a_phy>;
+			phy-names = "pciephy";
+
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>;
+			eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>;
+
+			status = "disabled";
+		};
+
+		pcie6a_phy: phy@1bfc000 {
+			compatible = "qcom,x1e80100-qmp-gen4x4-pcie-phy";
+			reg = <0 0x01bfc000 0 0x2000>,
+			      <0 0x01bfe000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_4L_CLKREF_EN>,
+				 <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_6A_PIPE_CLK>,
+				 <&gcc GCC_PCIE_6A_PIPEDIV2_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe",
+				      "pipediv2";
+
+			resets = <&gcc GCC_PCIE_6A_PHY_BCR>,
+				 <&gcc GCC_PCIE_6A_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
+
+			assigned-clocks = <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>;
+
+			qcom,4ln-config-sel = <&tcsr 0x1a000 0>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie6a_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie5: pci@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-x1e80100";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x7e000000 0 0xf1d>,
+			      <0 0x7e000f40 0 0xa8>,
+			      <0 0x7e001000 0 0x1000>,
+			      <0 0x7e100000 0 0x100000>,
+			      <0 0x01c03000 0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x7e200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x7e300000 0x0 0x7e300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <5>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
+				 <&gcc GCC_PCIE_5_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_5_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_5_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_5_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
+				 <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_5_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_north_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_5_BCR>,
+				 <&gcc GCC_PCIE_5_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			power-domains = <&gcc GCC_PCIE_5_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			phys = <&pcie5_phy>;
+			phy-names = "pciephy";
+
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555>;
+
+			status = "disabled";
+		};
+
+		pcie5_phy: phy@1c06000 {
+			compatible = "qcom,x1e80100-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
+				 <&gcc GCC_PCIE_5_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_2L_5_CLKREF_EN>,
+				 <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_5_PIPE_CLK>,
+				 <&gcc GCC_PCIE_5_PIPEDIV2_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe",
+				      "pipediv2";
+
+			resets = <&gcc GCC_PCIE_5_PHY_BCR>,
+				 <&gcc GCC_PCIE_5_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
+
+			assigned-clocks = <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc GCC_PCIE_5_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie5_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie4: pci@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-x1e80100";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x7c000000 0 0xf1d>,
+			      <0 0x7c000f40 0 0xa8>,
+			      <0 0x7c001000 0 0x1000>,
+			      <0 0x7c100000 0 0x100000>,
+			      <0 0x01c0b000 0 0x1000>;
+			reg-names = "parf",
+			            "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x7c200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x7c300000 0x0 0x7c300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <4>;
+			num-lanes = <2>;
+
+			msi-map = <0x0 &gic_its 0xc0000 0x10000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
+				 <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_north_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS
author	Dmitry Osipenko <digetx@gmail.com>	2021-01-20 03:45:48 +0300
committer	Bartosz Golaszewski <bgolaszewski@baylibre.com>	2021-02-15 11:43:30 +0100
commit	94de03ccc9f5d13e36cf1db8f9dfbf676fdfec07 (patch)
tree	7d7ac1bb4299395485053ee46af7ccd7c6530a3d /kernel/fail_function.c
parent	4a6eac2b4b129800a2ab37d7127e2244bce37653 (diff)