diff options
| author | Luiz Augusto von Dentz <luiz.von.dentz@intel.com> | 2025-03-12 11:14:20 -0400 |
|---|---|---|
| committer | Luiz Augusto von Dentz <luiz.von.dentz@intel.com> | 2025-03-25 12:46:40 -0400 |
| commit | 13218453521d75916dfed55efb8e809bfc03cb4b (patch) | |
| tree | 9037142ed3d098120164a66866b26b3e88a24112 /net/bluetooth/hci_sync.c | |
| parent | 42c6c7a0cfc4339cf9727a64f3e7d7d66a26855d (diff) | |
Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO
This enables buffer flow control for SCO/eSCO
(see: Bluetooth Core 6.0 spec: 6.22. Synchronous Flow Control Enable),
recently this has caused the following problem and is actually a nice
addition for the likes of Socket TX complete:
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0
> HCI Event: Command Complete (0x0e) plen 11
Read Buffer Size (0x04|0x0005) ncmd 1
Status: Success (0x00)
ACL MTU: 1021 ACL max packet: 5
SCO MTU: 240 SCO max packet: 8
...
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
> HCI Event: Hardware Error (0x10) plen 1
Code: 0x0a
To fix the code will now attempt to enable buffer flow control when
HCI_QUIRK_SYNC_FLOWCTL_SUPPORTED is set by the driver:
< HCI Command: Write Sync Fl.. (0x03|0x002f) plen 1
Flow control: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4
Write Sync Flow Control Enable (0x03|0x002f) ncmd 1
Status: Success (0x00)
On success then HCI_SCO_FLOWCTL would be set which indicates sco_cnt
shall be used for flow contro.
Fixes: 7fedd3bb6b77 ("Bluetooth: Prioritize SCO traffic")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Pauli Virtanen <pav@iki.fi>
Diffstat (limited to 'net/bluetooth/hci_sync.c')
| -rw-r--r-- | net/bluetooth/hci_sync.c | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index c4c2cf51b219..609b035e5c90 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -3769,6 +3769,28 @@ static int hci_write_ca_timeout_sync(struct hci_dev *hdev) sizeof(param), ¶m, HCI_CMD_TIMEOUT); } +/* Enable SCO flow control if supported */ +static int hci_write_sync_flowctl_sync(struct hci_dev *hdev) +{ + struct hci_cp_write_sync_flowctl cp; + int err; + + /* Check if the controller supports SCO and HCI_OP_WRITE_SYNC_FLOWCTL */ + if (!lmp_sco_capable(hdev) || !(hdev->commands[10] & BIT(4)) || + !test_bit(HCI_QUIRK_SYNC_FLOWCTL_SUPPORTED, &hdev->quirks)) + return 0; + + memset(&cp, 0, sizeof(cp)); + cp.enable = 0x01; + + err = __hci_cmd_sync_status(hdev, HCI_OP_WRITE_SYNC_FLOWCTL, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); + if (!err) + hci_dev_set_flag(hdev, HCI_SCO_FLOWCTL); + + return err; +} + /* BR Controller init stage 2 command sequence */ static const struct hci_init_stage br_init2[] = { /* HCI_OP_READ_BUFFER_SIZE */ @@ -3787,6 +3809,8 @@ static const struct hci_init_stage br_init2[] = { HCI_INIT(hci_clear_event_filter_sync), /* HCI_OP_WRITE_CA_TIMEOUT */ HCI_INIT(hci_write_ca_timeout_sync), + /* HCI_OP_WRITE_SYNC_FLOWCTL */ + HCI_INIT(hci_write_sync_flowctl_sync), {} }; |