Merge tag 'qcom-arm64-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm Arm64 DeviceTree updates for v6.18

Add support for Lenovo Thinkbook 16, Dell Inspiron 7441, Dell Latitude
7455, Samsung Galaxy S20, Billion Capture+, the Monaco EVK and the
Lemans EVK.

The SDM845 Cheza development boards are removed, as they are not longer
in use.

For IPQ5018 crypto, tsens, rng, SPI NAND support is dded, the two MDIO
buses are added and the internal GE PHY.

IPQ5424 gets CPU frequency scaling and a missing UART.

The SA8775P SoC is remaned Lemans, to reduce confusion about the chip
name. The IoT memory map introduced and made the default, GDSP FastRPC
and GPR nodes are added.

Touch keys are enabled on the BQ Aquaris X5 Plus.

On QCM2290 the video accelerator is enabled, so is HS timing modes for
eMMC.

The QCS615 platform is renamed SM6150. CPU frequency scaling and the WiFi
PCIe controller is introduced.

On Monaco (QCS8300) scaling of L3 and DDR bandwidth is introduced. So is
eMMC support and generic packer router (GPR).

On the Monaco Ride board, the eMMC controller is enabled.

On QRB220 RB1, the venus video accelerator is enabled.

For SC7280 the first PCIe controller and PHY is introduced. SoundWire,
LPASS, and USB offload support is added, the codecs and sound card is
then described on the QCM6490 IDP. The MDSS core reset is introduced, to
clear bootloader configuration on SC7280-based devices.
On Fairphone5, USB audio offload is added.

AudioReach support on SC7280 (QCS6490) is introduced and used to
enable sound on the RB3Gen2 board.

The video clock controller is added to SC8180X.

On SC8280XP the GPI DMA controllers are described and enabled.

Display and GPU is enabled for the Fairphone 3 and charging is enabled
on the Google Pixel 3a.

The routing for the second USB connector on the Lenovo Yoga C630 is
described.

On SM6150 ADSP and CDSP FastRPC is introduced, as is the video
encoder/decoder (venus).

On SM6350 RPMh statistics is enabled, the USB audio offload DAI is
introduced and on Fairphone4 the USB audio offload support is enabled.

On SM8450 QRD the PMIC GLINK is described, to add USB Type-C and battery
functionality.

On SM8650 ACD levels are added for the GPU.

Camera and video clock controllers power-domains are updated on SM8450,
SM8550, and SM8650, now that support for multiple power-domains is
accepted.

SM8750 gains bwmon support for dynamic bus scaling, and PCIe nodes.

The DWC3 glue and core nodes are flattened on a number of platforms.

USB Type-C DisplayPort support is extended to 4 lanes (from 2) on a
variety of platforms, now that the QMP PHY driver supports this.

Platform specific RPMh PD constants are replaced with generic constants
wherever possible.

On X Elite the PM8010 is disabled by default, removing boot splats
on a variety of boards without this PMIC, the video clock controller is
added.

For the X Elite and X Plus CRDs, and the Lenovo Thinkpad T14s, HBR3 is
marked as valid for the external DisplayPorts. The fingerprint reader
found on the CRDs are enabled. The PCIe x8 slot on the QCP is enabled.
The two Microsoft Surface Laptop 7 gains WiFi and Bluetooth support.

GPU support is added for the X Plus SoC.

* tag 'qcom-arm64-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (208 commits)
  arm64: dts: qcom: x1e80100: Update GPU OPP table
  arm64: dts: qcom: sm8650: Drop redundant status from PMK8550 RTC
  arm64: dts: qcom: add initial support for Samsung Galaxy S20
  dt-bindings: arm: qcom: document x1q board binding
  arm64: dts: qcom: sm8250-samsung-r8q: Move common parts to dtsi
  arm64: dts: qcom: lemans-evk: Add sound card
  arm64: dts: qcom: lemans: Add gpr node
  arm64: dts: qcom: x1e78100-t14s-oled: Add eDP panel
  arm64: dts: qcom: qcs615-ride: enable venus node to initialize video codec
  arm64: dts: qcom: sm6150: add venus node to devicetree
  arm64: dts: qcom: x1e80100-romulus: Add WCN7850 Wi-Fi/BT
  arm64: dts: qcom: qrb2210-rb1: Enable Venus
  arm64: dts: qcom: qcm2290: Add Venus video node
  arm64: dts: qcom: monaco-evk: Add sound card
  arm64: dts: qcom: qcs8300: Add gpr node
  arm64: dts: qcom: qcs8300: Add Monaco EVK board
  dt-bindings: arm: qcom: Add Monaco EVK support
  arm64: dts: qcom: qcm6490-idp: Add sound card
  arm64: dts: qcom: qcm6490-idp: Add WSA8830 speakers and WCD9370 headset codec
  arm64: dts: qcom: qcs6490-rb3gen2: Add sound card
  ...

Link: https://lore.kernel.org/r/20250911233600.3033675-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

0 files changed, 0 insertions, 0 deletions