Merge tag 'ti-k3-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

TI K3 device tree updates for v6.14

Generic Fixups/Cleanups:
- Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties for
  ethernet phy
- Clock description added to ICSS-G

SoC Specific features and Fixes:
- Duplicate GICR reg defines in am62x/am62ax
- Mailbox nodes are enabled at board level bringing AM67/j722s/am62p to same
  behavior as other K3 SoCs.
- Introduction of deep-sleep state defines for pinctrl header

AM62Ax
- Enable ti-sysc for wkup_uart0

AM64:
- Switch ICSSG clock to core clock.

J7200:
- Disable SPI1 loopback default.

J784s4:
- Clock ID fix for McSPI instances
- Use j7200-padconf compatibility for padconf to enable suspend-to-ram support.

Board Specific:

AM62
- phyboard - hdmi bridge regulator and using 16bit input for hdmi bridge,
  vcc-supply for i2c eeprom
- SK - SoC wakeup using USB1, Add bootph property around cpsw mac syscon node,
  M4 mailbox node redefinition fixup.
- BeaglePlay: Fix ethernet phy reset time

AM64
- hummingboard-t: Convert PCIE/USB overlays to independent dts.

j7200:
- EVM: fix typo in overlay name.

j721e:
- EVM: overlay for pcie1 endpoint mode.

j722s:
- EVM: Add mcu_i2c0 support for expansion pins., Add USB0 DFU support, Enable
  PMIC
- AM67a-beagley-ai: Add remote proc nodes

j784s4:
- AM69-SK/ j784s4-EVM - Mark PMIC regulators with bootph-all property to
  indicate ones that are needed through boot phases.
- AM69-sk: PIC0 Endpoint mode overlay, USB Superspeed mode.

* tag 'ti-k3-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (31 commits)
  arm64: dts: ti: k3-am62a-wakeup: Configure ti-sysc for wkup_uart0
  arm64: dts: ti: k3-j722s-evm: Enable PMIC
  arm64: dts: ti: k3-am69-sk: Add USB SuperSpeed support
  arm64: dts: ti: k3-am625-beagleplay: Fix DP83TD510E reset time
  arm64: dts: ti: k3-am642-hummingboard-t: Convert overlay to board dts
  arm64: dts: ti: k3-am69-sk: Add overlay for PCIE0 Endpoint Mode
  arm64: dts: ti: k3-am68-sk-base-board: Add overlay for PCIE1 Endpoint Mode
  arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE1 Endpoint Mode
  arm64: dts: ti: Makefile: Fix typo "k3-j7200-evm-pcie1-ep.dtbo"
  arm64: dts: ti: k3-j7200: Add node to disable loopback connection
  arm64: dts: ti: k3-j784s4: Use ti,j7200-padconf compatible
  arm64: dts: ti: k3-am62p-j722s-common-main: Enable USB0 for DFU boot
  arm64: dts: ti: k3-am62a: Remove duplicate GICR reg
  arm64: dts: ti: k3-am62: Remove duplicate GICR reg
  arm64: dts: ti: k3-am67a-beagley-ai: Add remote processor nodes
  arm64: dts: ti: k3-am62p: Enable Mailbox nodes at the board level
  arm64: dts: ti: k3-am625-sk: Remove M4 mailbox node redefinition
  arm64: dts: ti: k3-j722s-evm: Enable support for mcu_i2c0
  arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in cpsw_mac_syscon node
  arm64: dts: ti: Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties
  ...

Link: https://lore.kernel.org/r/20250110210812.bdpypzvmg6s6sr5t@itinerary
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

0 files changed, 0 insertions, 0 deletions