Revert "drm/dp_mst: Retrieve extended DPCD caps for topology manager"

This reverts commit ad44c03208e46b83e4ae3269e32c9e524aa71cf8. Currently DRM driver assume the source device caps is higher than the MST device caps. With this commit, this statement would be broken. e.g. the source device only support DP1.2 and the mst device support DP1.4. Signed-off-by: Koba Ko <koba.ko@canonical.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201103034907.72129-1-koba.ko@canonical.com
author: Koba Ko <koba.ko@canonical.com> 2020-11-03 11:49:07 +0800
committer: Lyude Paul <lyude@redhat.com> 2020-11-10 12:41:01 -0500
commit: 2dcab875e7637f1d3f9b978566e61ed1cbbba054 (patch)
tree: af205427f63c52b0917cef19629d1bdf42bc92fc /scripts/objdiff
parent: 23d6ab1d4c503660632e7b18cbb571d62d9bf792 (diff)
0 files changed, 0 insertions, 0 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index b3fc891f1544..6663ffd23f25 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -14,16 +14,17 @@ config ARM64
 	select ARCH_HAS_DEBUG_WX
 	select ARCH_BINFMT_ELF_EXTRA_PHDRS
 	select ARCH_BINFMT_ELF_STATE
-	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
 	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
 	select ARCH_ENABLE_MEMORY_HOTPLUG
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
 	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
 	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
 	select ARCH_HAS_CACHE_LINE_SIZE
+	select ARCH_HAS_CC_PLATFORM
 	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL
 	select ARCH_HAS_DEBUG_VM_PGTABLE
+	select ARCH_HAS_DMA_OPS if XEN
 	select ARCH_HAS_DMA_PREP_COHERENT
 	select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
 	select ARCH_HAS_FAST_MULTIPLIER
@@ -34,14 +35,20 @@ config ARM64
 	select ARCH_HAS_KERNEL_FPU_SUPPORT if KERNEL_MODE_NEON
 	select ARCH_HAS_KEEPINITRD
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_MEM_ENCRYPT
+	select ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
 	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
-	select ARCH_HAS_PTE_DEVMAP
+	select ARCH_HAS_NONLEAF_PMD_YOUNG if ARM64_HAFT
+	select ARCH_HAS_PREEMPT_LAZY
+	select ARCH_HAS_PTDUMP
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_HW_PTE_YOUNG
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_SET_MEMORY
+	select ARCH_HAS_MEM_ENCRYPT
+	select ARCH_HAS_FORCE_DMA_UNENCRYPTED
 	select ARCH_STACKWALK
 	select ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_HAS_STRICT_MODULE_RWX
@@ -93,12 +100,17 @@ config ARM64
 	select ARCH_SUPPORTS_SHADOW_CALL_STACK if CC_HAVE_SHADOW_CALL_STACK
 	select ARCH_SUPPORTS_LTO_CLANG if CPU_LITTLE_ENDIAN
 	select ARCH_SUPPORTS_LTO_CLANG_THIN
-	select ARCH_SUPPORTS_CFI_CLANG
+	select ARCH_SUPPORTS_CFI
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select ARCH_SUPPORTS_PAGE_TABLE_CHECK
 	select ARCH_SUPPORTS_PER_VMA_LOCK
+	select ARCH_SUPPORTS_HUGE_PFNMAP if TRANSPARENT_HUGEPAGE
+	select ARCH_SUPPORTS_RT
+	select ARCH_SUPPORTS_SCHED_SMT
+	select ARCH_SUPPORTS_SCHED_CLUSTER
+	select ARCH_SUPPORTS_SCHED_MC
 	select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
 	select ARCH_WANT_DEFAULT_BPF_JIT
@@ -106,7 +118,7 @@ config ARM64
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
 	select ARCH_WANT_LD_ORPHAN_WARN
-	select ARCH_WANTS_EXECMEM_LATE if EXECMEM
+	select ARCH_WANTS_EXECMEM_LATE
 	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANTS_THP_SWAP if ARM64_4K_PAGES
 	select ARCH_HAS_UBSAN
@@ -117,14 +129,15 @@ config ARM64
 	select ARM_GIC_V2M if PCI
 	select ARM_GIC_V3
 	select ARM_GIC_V3_ITS if PCI
+	select ARM_GIC_V5
 	select ARM_PSCI_FW
 	select BUILDTIME_TABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select CPUMASK_OFFSTACK if NR_CPUS > 256
-	select CRC32
 	select DCACHE_WORD_ACCESS
+	select HAVE_EXTRA_IPI_TRACEPOINTS
 	select DYNAMIC_FTRACE if FUNCTION_TRACER
 	select DMA_BOUNCE_UNALIGNED_KMALLOC
 	select DMA_DIRECT_REMAP
@@ -141,18 +154,18 @@ config ARM64
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IOREMAP
+	select GENERIC_IRQ_ENTRY
 	select GENERIC_IRQ_IPI
+	select GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
 	select GENERIC_LIB_DEVMEM_IS_ALLOWED
 	select GENERIC_PCI_IOMAP
-	select GENERIC_PTDUMP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_GETTIMEOFDAY
-	select GENERIC_VDSO_TIME_NS
 	select HARDIRQS_SW_RESEND
 	select HAS_IOPORT
 	select HAVE_MOVE_PMD
@@ -175,12 +188,12 @@ config ARM64
 	select HAVE_ARCH_KCSAN if EXPERT
 	select HAVE_ARCH_KFENCE
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_KSTACK_ERASE
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
 	select HAVE_ARCH_PREL32_RELOCATIONS
 	select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 	select HAVE_ARCH_SECCOMP_FILTER
-	select HAVE_ARCH_STACKLEAK
 	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
@@ -196,29 +209,32 @@ config ARM64
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_ARGS \
-		if $(cc-option,-fpatchable-function-entry=2)
+		if (GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS || \
+		    CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS)
 	select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS \
 		if DYNAMIC_FTRACE_WITH_ARGS && DYNAMIC_FTRACE_WITH_CALL_OPS
 	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \
-		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG && \
+		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI && \
 		    (CC_IS_CLANG || !CC_OPTIMIZE_FOR_SIZE))
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \
 		if DYNAMIC_FTRACE_WITH_ARGS
 	select HAVE_SAMPLE_FTRACE_DIRECT
 	select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
+	select HAVE_BUILDTIME_MCOUNT_SORT
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_GUP_FAST
-	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FTRACE_GRAPH_FUNC
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_FREGS
 	select HAVE_FUNCTION_GRAPH_TRACER
-	select HAVE_FUNCTION_GRAPH_RETVAL
 	select HAVE_GCC_PLUGINS
 	select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && \
 		HW_PERF_EVENTS && HAVE_PERF_EVENTS_NMI
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_IOREMAP_PROT
 	select HAVE_IRQ_TIME_ACCOUNTING
+	select HAVE_LIVEPATCH
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
 	select HAVE_PERF_EVENTS
@@ -227,19 +243,22 @@ config ARM64
 	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_PREEMPT_DYNAMIC_KEY
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_RELIABLE_STACKTRACE
 	select HAVE_POSIX_CPU_TIMERS_TASK_WORK
 	select HAVE_FUNCTION_ARG_ACCESS_API
 	select MMU_GATHER_RCU_TABLE_FREE
 	select HAVE_RSEQ
-	select HAVE_RUST if CPU_LITTLE_ENDIAN
+	select HAVE_RUST if RUSTC_SUPPORTS_ARM64
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_GENERIC_VDSO
 	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
+	select HOTPLUG_SMT if HOTPLUG_CPU
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
+	select JUMP_LABEL
 	select KASAN_VMALLOC if KASAN
 	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
@@ -262,19 +281,31 @@ config ARM64
 	select TRACE_IRQFLAGS_NMI_SUPPORT
 	select HAVE_SOFTIRQ_ON_OWN_STACK
 	select USER_STACKTRACE_SUPPORT
+	select VDSO_GETRANDOM
+	select VMAP_STACK
 	help
 	  ARM 64-bit (AArch64) Linux support.
 
+config RUSTC_SUPPORTS_ARM64
+	def_bool y
+	depends on CPU_LITTLE_ENDIAN
+	# Shadow call stack is only supported on certain rustc versions.
+	#
+	# When using the UNWIND_PATCH_PAC_INTO_SCS option, rustc version 1.80+ is
+	# required due to use of the -Zfixed-x18 flag.
+	#
+	# Otherwise, rustc version 1.82+ is required due to use of the
+	# -Zsanitizer=shadow-call-stack flag.
+	depends on !SHADOW_CALL_STACK || RUSTC_VERSION >= 108200 || RUSTC_VERSION >= 108000 && UNWIND_PATCH_PAC_INTO_SCS
+
 config CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS
 	def_bool CC_IS_CLANG
 	# https://github.com/ClangBuiltLinux/linux/issues/1507
 	depends on AS_IS_GNU || (AS_IS_LLVM && (LD_IS_LLD || LD_VERSION >= 23600))
-	select HAVE_DYNAMIC_FTRACE_WITH_ARGS
 
 config GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS
 	def_bool CC_IS_GCC
 	depends on $(cc-option,-fpatchable-function-entry=2)
-	select HAVE_DYNAMIC_FTRACE_WITH_ARGS
 
 config 64BIT
 	def_bool y
@@ -300,15 +331,15 @@ config ARCH_MMAP_RND_BITS_MIN
 	default 18
 
 # max bits determined by the following formula:
-#  VA_BITS - PAGE_SHIFT - 3
+#  VA_BITS - PTDESC_TABLE_SHIFT
 config ARCH_MMAP_RND_BITS_MAX
 	default 19 if ARM64_VA_BITS=36
 	default 24 if ARM64_VA_BITS=39
 	default 27 if ARM64_VA_BITS=42
 	default 30 if ARM64_VA_BITS=47
-	default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES
-	default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES
-	default 33 if ARM64_VA_BITS=48
+	default 29 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_64K_PAGES
+	default 31 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_16K_PAGES
+	default 33 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52)
 	default 14 if ARM64_64K_PAGES
 	default 16 if ARM64_16K_PAGES
 	default 18
@@ -423,7 +454,7 @@ config AMPERE_ERRATUM_AC03_CPU_38
 	default y
 	help
 	  This option adds an alternative code sequence to work around Ampere
-	  erratum AC03_CPU_38 on AmpereOne.
+	  errata AC03_CPU_38 and AC04_CPU_10 on AmpereOne.
 
 	  The affected design reports FEAT_HAFDBS as not implemented in
 	  ID_AA64MMFR1_EL1.HAFDBS, but (V)TCR_ELx.{HA,HD} are not RES0
@@ -437,6 +468,23 @@ config AMPERE_ERRATUM_AC03_CPU_38
 
 	  If unsure, say Y.
 
+config AMPERE_ERRATUM_AC04_CPU_23
+        bool "AmpereOne: AC04_CPU_23:  Failure to synchronize writes to HCR_EL2 may corrupt address translations."
+	default y
+	help
+	  This option adds an alternative code sequence to work around Ampere
+	  errata AC04_CPU_23 on AmpereOne.
+
+	  Updates to HCR_EL2 can rarely corrupt simultaneous translations for
+	  data addresses initiated by load/store instructions. Only
+	  instruction initiated translations are vulnerable, not translations
+	  from prefetches for example. A DSB before the store to HCR_EL2 is
+	  sufficient to prevent older instructions from hitting the window
+	  for corruption, and an ISB after is sufficient to prevent younger
+	  instructions from hitting the window for corruption.
+
+	  If unsure, say Y.
+
 config ARM64_WORKAROUND_CLEAN_CACHE
 	bool
 
@@ -615,9 +663,6 @@ config ARM64_ERRATUM_843419
 
 	  If unsure, say Y.
 
-config ARM64_LD_HAS_FIX_ERRATUM_843419
-	def_bool $(ld-option,--fix-cortex-a53-843419)
-
 config ARM64_ERRATUM_1024718
 	bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update"
 	default y
@@ -1069,30 +1114,43 @@ config ARM64_ERRATUM_3117295
 	  If unsure, say Y.
 
 config ARM64_ERRATUM_3194386
-	bool "Cortex-{A720,X4,X925}/Neoverse-V3: workaround for MSR SSBS not self-synchronizing"
+	bool "Cortex-*/Neoverse-*: workaround for MSR SSBS not self-synchronizing"
 	default y
 	help
 	  This option adds the workaround for the following errata:
 
+	  * ARM Cortex-A76 erratum 3324349
+	  * ARM Cortex-A77 erratum 3324348
+	  * ARM Cortex-A78 erratum 3324344
+	  * ARM Cortex-A78C erratum 3324346
+	  * ARM Cortex-A78C erratum 3324347
 	  * ARM Cortex-A710 erratam 3324338
+	  * ARM Cortex-A715 errartum 3456084
 	  * ARM Cortex-A720 erratum 3456091
+	  * ARM Cortex-A725 erratum 3456106
+	  * ARM Cortex-X1 erratum 3324344
+	  * ARM Cortex-X1C erratum 3324346
 	  * ARM Cortex-X2 erratum 3324338
 	  * ARM Cortex-X3 erratum 3324335
 	  * ARM Cortex-X4 erratum 3194386
 	  * ARM Cortex-X925 erratum 3324334
+	  * ARM Neoverse-N1 erratum 3324349
 	  * ARM Neoverse N2 erratum 3324339
+	  * ARM Neoverse-N3 erratum 3456111
+	  * ARM Neoverse-V1 erratum 3324341
 	  * ARM Neoverse V2 erratum 3324336
 	  * ARM Neoverse-V3 erratum 3312417
+	  * ARM Neoverse-V3AE erratum 3312417
 
 	  On affected cores "MSR SSBS, #0" instructions may not affect
 	  subsequent speculative instructions, which may permit unexepected
 	  speculative store bypassing.
 
-	  Work around this problem by placing a speculation barrier after
-	  kernel changes to SSBS. The presence of the SSBS special-purpose
-	  register is hidden from hwcaps and EL0 reads of ID_AA64PFR1_EL1, such
-	  that userspace will use the PR_SPEC_STORE_BYPASS prctl to change
-	  SSBS.
+	  Work around this problem by placing a Speculation Barrier (SB) or
+	  Instruction Synchronization Barrier (ISB) after kernel changes to
+	  SSBS. The presence of the SSBS special-purpose register is hidden
+	  from hwcaps and EL0 reads of ID_AA64PFR1_EL1, such that userspace
+	  will use the PR_SPEC_STORE_BYPASS prctl to change SSBS.
 
 	  If unsure, say Y.
 
@@ -1204,6 +1262,17 @@ config HISILICON_ERRATUM_161600802
 
 	  If unsure, say Y.
 
+config HISILICON_ERRATUM_162100801
+	bool "Hip09 162100801 erratum support"
+	default y
+	help
+	  When enabling GICv4.1 in hip09, VMAPP will fail to clear some caches
+	  during unmapping operation, which will cause some vSGIs lost.
+	  To fix the issue, invalidate related vPE cache through GICR_INVALLR
+	  after VMOVP.
+
+	  If unsure, say Y.
+
 config QCOM_FALKOR_ERRATUM_1003
 	bool "Falkor E1003: Incorrect translation due to ASID change"
 	default y
@@ -1256,6 +1325,15 @@ config NVIDIA_CARMEL_CNP_ERRATUM
 
 	  If unsure, say Y.
 
+config ROCKCHIP_ERRATUM_3568002
+	bool "Rockchip 3568002: GIC600 can not access physical addresses higher than 4GB"
+	default y
+	help
+	  The Rockchip RK3566 and RK3568 GIC600 SoC integrations have AXI
+	  addressing limited to the first 32bit of physical address space.
+
+	  If unsure, say Y.
+
 config ROCKCHIP_ERRATUM_3588001
 	bool "Rockchip 3588001: GIC600 can not support shareability attributes"
 	default y
@@ -1337,7 +1415,6 @@ config ARM64_VA_BITS_48
 
 config ARM64_VA_BITS_52
 	bool "52-bit"
-	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
 	help
 	  Enable 52-bit virtual addressing for userspace when explicitly
 	  requested via a hint to mmap(). The kernel will also use 52-bit
@@ -1389,7 +1466,6 @@ config ARM64_PA_BITS_48
 config ARM64_PA_BITS_52
 	bool "52-bit"
 	depends on ARM64_64K_PAGES || ARM64_VA_BITS_52
-	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
 	help
 	  Enable support for a 52-bit physical address space, introduced as
 	  part of the ARMv8.2-LPA extension.
@@ -1419,8 +1495,7 @@ choice
 
 config CPU_BIG_ENDIAN
 	bool "Build big-endian kernel"
-	# https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161c
-	depends on AS_IS_GNU || AS_VERSION >= 150000
+	depends on BROKEN
 	help
 	  Say Y if you plan on running a kernel with a big-endian userspace.
 
@@ -1432,29 +1507,6 @@ config CPU_LITTLE_ENDIAN
 
 endchoice
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_CLUSTER
-	bool "Cluster scheduler support"
-	help
-	  Cluster scheduler support improves the CPU scheduler's decision
-	  making when dealing with machines that have clusters of CPUs.
-	  Cluster usually means a couple of CPUs which are placed closely
-	  by sharing mid-level caches, last-level cache tags or internal
-	  busses.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config NR_CPUS
 	int "Maximum number of CPUs (2-4096)"
 	range 2 4096
@@ -1497,7 +1549,6 @@ source "kernel/Kconfig.hz"
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
 	select SPARSEMEM_VMEMMAP_ENABLE
-	select SPARSEMEM_VMEMMAP
 
 config HW_PERF_EVENTS
 	def_bool y
@@ -1545,9 +1596,15 @@ config ARCH_SUPPORTS_KEXEC_IMAGE_VERIFY_SIG
 config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG
 	def_bool y
 
+config ARCH_SUPPORTS_KEXEC_HANDOVER
+	def_bool y
+
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool y
 
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
+
 config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION
 	def_bool CRASH_RESERVE
 
@@ -1619,23 +1676,10 @@ config MITIGATE_SPECTRE_BRANCH_HISTORY
 	  When taking an exception from user-space, a sequence of branches
 	  or a firmware call overwrites the branch history.
 
-config RODATA_FULL_DEFAULT_ENABLED
-	bool "Apply r/o permissions of VM areas also to their linear aliases"
-	default y
-	help
-	  Apply read-only attributes of VM areas to the linear alias of
-	  the backing pages as well. This prevents code or read-only data
-	  from being modified (inadvertently or intentionally) via another
-	  mapping of the same memory page. This additional enhancement can
-	  be turned off at runtime by passing rodata=[off|on] (and turned on
-	  with rodata=full if this option is set to 'n')
-
-	  This requires the linear region to be mapped down to pages,
-	  which may adversely affect performance in some cases.
-
 config ARM64_SW_TTBR0_PAN
 	bool "Emulate Privileged Access Never using TTBR0_EL1 switching"
 	depends on !KCSAN
+	select ARM64_PAN
 	help
 	  Enabling this option prevents the kernel from accessing
 	  user-space memory directly by pointing TTBR0_EL1 to a reserved
@@ -1702,7 +1746,6 @@ config COMPAT_VDSO
 	bool "Enable vDSO for 32-bit applications"
 	depends on !CPU_BIG_ENDIAN
 	depends on (CC_IS_CLANG && LD_IS_LLD) || "$(CROSS_COMPILE_COMPAT)" != ""
-	select GENERIC_COMPAT_VDSO
 	default y
 	help
 	  Place in the process address space of 32-bit applications an
@@ -1829,13 +1872,9 @@ config ARM64_PAN
 	  The feature is detected at runtime, and will remain as a 'nop'
 	  instruction if the cpu does not implement the feature.
 
-config AS_HAS_LSE_ATOMICS
-	def_bool $(as-instr,.arch_extension lse)
-
 config ARM64_LSE_ATOMICS
 	bool
 	default ARM64_USE_LSE_ATOMICS
-	depends on AS_HAS_LSE_ATOMICS
 
 config ARM64_USE_LSE_ATOMICS
 	bool "Atomic instructions"
@@ -1847,20 +1886,12 @@ config ARM64_USE_LSE_ATOMICS
 
 	  Say Y here to make use of these instructions for the in-kernel
 	  atomic routines. This incurs a small overhead on CPUs that do
-	  not support these instructions and requires the kernel to be
-	  built with binutils >= 2.25 in order for the new instructions
-	  to be used.
+	  not support these instructions.
 
 endmenu # "ARMv8.1 architectural features"
 
 menu "ARMv8.2 architectural features"
 
-config AS_HAS_ARMV8_2
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.2-a)
-
-config AS_HAS_SHA3
-	def_bool $(as-instr,.arch armv8.2-a+sha3)
-
 config ARM64_PMEM
 	bool "Enable support for persistent memory"
 	select ARCH_HAS_PMEM_API
@@ -1892,7 +1923,6 @@ config ARM64_RAS_EXTN
 config ARM64_CNP
 	bool "Enable support for Common Not Private (CNP) translations"
 	default y
-	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
 	help
 	  Common Not Private (CNP) allows translation table entries to
 	  be shared between different PEs in the same inner shareable
@@ -1935,7 +1965,6 @@ config ARM64_PTR_AUTH_KERNEL
 	bool "Use pointer authentication for kernel"
 	default y
 	depends on ARM64_PTR_AUTH
-	depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_ARMV8_3
 	# Modern compilers insert a .note.gnu.property section note for PAC
 	# which is only understood by binutils starting with version 2.33.1.
 	depends on LD_IS_LLD || LD_VERSION >= 23301 || (CC_IS_GCC && GCC_VERSION < 90100)
@@ -1956,19 +1985,10 @@ config CC_HAS_BRANCH_PROT_PAC_RET
 	# GCC 9 or later, clang 8 or later
 	def_bool $(cc-option,-mbranch-protection=pac-ret+leaf)
 
-config CC_HAS_SIGN_RETURN_ADDRESS
-	# GCC 7, 8
-	def_bool $(cc-option,-msign-return-address=all)
-
-config AS_HAS_ARMV8_3
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.3-a)
-
 config AS_HAS_CFI_NEGATE_RA_STATE
+	# binutils 2.34+
 	def_bool $(as-instr,.cfi_startproc\n.cfi_negate_ra_state\n.cfi_endproc\n)
 
-config AS_HAS_LDAPR
-	def_bool $(as-instr,.arch_extension rcpc)
-
 endmenu # "ARMv8.3 architectural features"
 
 menu "ARMv8.4 architectural features"
@@ -1996,20 +2016,13 @@ config ARM64_AMU_EXTN
 	  correctly reflect reality. Most commonly, the value read will be 0,
 	  indicating that the counter is not enabled.
 
-config AS_HAS_ARMV8_4
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.4-a)
-
 config ARM64_TLB_RANGE
 	bool "Enable support for tlbi range feature"
 	default y
-	depends on AS_HAS_ARMV8_4
 	help
 	  ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a
 	  range of input addresses.
 
-	  The feature introduces new assembly instructions, and they were
-	  support when binutils >= 2.30.
-
 endmenu # "ARMv8.4 architectural features"
 
 menu "ARMv8.5 architectural features"
@@ -2085,12 +2098,12 @@ config ARM64_MTE
 	default y
 	depends on ARM64_AS_HAS_MTE && ARM64_TAGGED_ADDR_ABI
 	depends on AS_HAS_ARMV8_5
-	depends on AS_HAS_LSE_ATOMICS
 	# Required for tag checking in the uaccess routines
-	depends on ARM64_PAN
+	select ARM64_PAN
 	select ARCH_HAS_SUBPAGE_FAULTS
 	select ARCH_USES_HIGH_VMA_FLAGS
-	select ARCH_USES_PG_ARCH_X
+	select ARCH_USES_PG_ARCH_2
+	select ARCH_USES_PG_ARCH_3
 	help
 	  Memory Tagging (part of the ARMv8.5 Extensions) provides
 	  architectural support for run-time, always-on detection of
@@ -2127,6 +2140,67 @@ config ARM64_EPAN
 	  if the cpu does not implement the feature.
 endmenu # "ARMv8.7 architectural features"
 
+config AS_HAS_MOPS
+	def_bool $(as-instr,.arch_extension mops)
+
+menu "ARMv8.9 architectural features"
+
+config ARM64_POE
+	prompt "Permission Overlay Extension"
+	def_bool y
+	select ARCH_USES_HIGH_VMA_FLAGS
+	select ARCH_HAS_PKEYS
+	help
+	  The Permission Overlay Extension is used to implement Memory
+	  Protection Keys. Memory Protection Keys provides a mechanism for
+	  enforcing page-based protections, but without requiring modification
+	  of the page tables when an application changes protection domains.
+
+	  For details, see Documentation/core-api/protection-keys.rst
+
+	  If unsure, say y.
+
+config ARCH_PKEY_BITS
+	int
+	default 3
+
+config ARM64_HAFT
+	bool "Support for Hardware managed Access Flag for Table Descriptors"
+	depends on ARM64_HW_AFDBM
+	default y
+	help
+	  The ARMv8.9/ARMv9.5 introduces the feature Hardware managed Access
+	  Flag for Table descriptors. When enabled an architectural executed
+	  memory access will update the Access Flag in each Table descriptor
+	  which is accessed during the translation table walk and for which
+	  the Access Flag is 0. The Access Flag of the Table descriptor use
+	  the same bit of PTE_AF.
+
+	  The feature will only be enabled if all the CPUs in the system
+	  support this feature. If unsure, say Y.
+
+endmenu # "ARMv8.9 architectural features"
+
+menu "ARMv9.4 architectural features"
+
+config ARM64_GCS
+	bool "Enable support for Guarded Control Stack (GCS)"
+	default y
+	select ARCH_HAS_USER_SHADOW_STACK
+	select ARCH_USES_HIGH_VMA_FLAGS
+	help
+	  Guarded Control Stack (GCS) provides support for a separate
+	  stack with restricted access which contains only return
+	  addresses.  This can be used to harden against some attacks
+	  by comparing return address used by the program with what is
+	  stored in the GCS, and may also be used to efficiently obtain
+	  the call stack for applications such as profiling.
+
+	  The feature is detected at runtime, and will remain disabled
+	  if the system does not implement the feature.
+
+endmenu # "ARMv9.4 architectural features"
+
 config ARM64_SVE
 	bool "ARM Scalable Vector Extension support"
 	default y
@@ -2251,8 +2325,7 @@ config STACKPROTECTOR_PER_TASK
 
 config UNWIND_PATCH_PAC_INTO_SCS
 	bool "Enable shadow call stack dynamically using code patching"
-	# needs Clang with https://github.com/llvm/llvm-project/commit/de07cde67b5d205d58690be012106022aea6d2b3 incorporated
-	depends on CC_IS_CLANG && CLANG_VERSION >= 150000
+	depends on CC_IS_CLANG
 	depends on ARM64_PTR_AUTH_KERNEL && CC_HAS_BRANCH_PROT_PAC_RET
 	depends on SHADOW_CALL_STACK
 	select UNWIND_TABLES
@@ -2389,3 +2462,4 @@ source "drivers/acpi/Kconfig"
 
 source "arch/arm64/kvm/Kconfig"
 
+source "kernel/livepatch/Kconfig"
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 6c6d11536b42..13173795c43d 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -37,8 +37,21 @@ config ARCH_APPLE
 	bool "Apple Silicon SoC family"
 	select APPLE_AIC
 	help
-	  This enables support for Apple's in-house ARM SoC family, starting
-	  with the Apple M1.
+	  This enables support for Apple's in-house ARM SoC family, such
+	  as the Apple M1.
+
+config ARCH_ARTPEC
+	bool "Axis Communications ARTPEC SoC Family"
+	depends on ARCH_EXYNOS
+	select ARM_GIC
+	help
+	   This enables support for the ARMv8 based ARTPEC SoC Family.
+
+config ARCH_AXIADO
+	bool "Axiado SoC Family"
+	select GPIOLIB
+	help
+	  This enables support for Axiado SoC family like AX3000
 
 menuconfig ARCH_BCM
 	bool "Broadcom SoC Support"
@@ -101,6 +114,17 @@ config ARCH_BITMAIN
 	help
 	  This enables support for the Bitmain SoC Family.
 
+config ARCH_BLAIZE
+	bool "Blaize SoC Platforms"
+	help
+	  This enables support for the Blaize SoC family
+
+config ARCH_CIX
+	bool "Cixtech SoC family"
+	help
+	  This enables support for the Cixtech SoC family,
+	  like P1(sky1).
+
 config ARCH_EXYNOS
 	bool "Samsung Exynos SoC family"
 	select COMMON_CLK_SAMSUNG
@@ -114,29 +138,9 @@ config ARCH_EXYNOS
 	help
 	  This enables support for ARMv8 based Samsung Exynos SoC family.
 
-config ARCH_SPARX5
-	bool "Microchip Sparx5 SoC family"
-	select PINCTRL
-	select DW_APB_TIMER_OF
-	help
-	  This enables support for the Microchip Sparx5 ARMv8-based
-	  SoC family of TSN-capable gigabit switches.
-
-	  The SparX-5 Ethernet switch family provides a rich set of
-	  switching features such as advanced TCAM-based VLAN and QoS
-	  processing enabling delivery of differentiated services, and
-	  security through TCAM-based frame processing using versatile
-	  content aware processor (VCAP).
-
 config ARCH_K3
 	bool "Texas Instruments Inc. K3 multicore SoC architecture"
-	select PM_GENERIC_DOMAINS if PM
-	select MAILBOX
 	select SOC_TI
-	select TI_MESSAGE_MANAGER
-	select TI_SCI_PROTOCOL
-	select TI_SCI_INTR_IRQCHIP
-	select TI_SCI_INTA_IRQCHIP
 	select TI_K3_SOCINFO
 	help
 	  This enables support for Texas Instruments' K3 multicore SoC
@@ -175,6 +179,51 @@ config ARCH_MESON
 	  This enables support for the arm64 based Amlogic SoCs
 	  such as the s905, S905X/D, S912, A113X/D or S905X/D2
 
+menu "Microchip SoC support"
+
+config ARCH_MICROCHIP
+	bool
+
+config ARCH_LAN969X
+	bool "Microchip LAN969X SoC family"
+	select PINCTRL
+	select DW_APB_TIMER_OF
+	select ARCH_MICROCHIP
+	help
+	  This enables support for the Microchip LAN969X ARMv8-based
+	  SoC family of TSN-capable gigabit switches.
+
+	  The LAN969X Ethernet switch family provides a rich set of
+	  switching features such as advanced TCAM-based VLAN and QoS
+	  processing enabling delivery of differentiated services, and
+	  security through TCAM-based frame processing using versatile
+	  content aware processor (VCAP).
+
+config ARCH_SPARX5
+	bool "Microchip Sparx5 SoC family"
+	select PINCTRL
+	select DW_APB_TIMER_OF
+	select ARCH_MICROCHIP
+	help
+	  This enables support for the Microchip Sparx5 ARMv8-based
+	  SoC family of TSN-capable gigabit switches.
+
+	  The SparX-5 Ethernet switch family provides a rich set of
+	  switching features such as advanced TCAM-based VLAN and QoS
+	  processing enabling delivery of differentiated services, and
+	  security through TCAM-based frame processing using versatile
+	  content aware processor (VCAP).
+
+endmenu
+
+config ARCH_MMP
+	bool "Marvell MMP SoC Family"
+	select PINCTRL
+	select PINCTRL_SINGLE
+	help
+	  This enables support for Marvell MMP SoC family, currently
+	  supporting PXA1908 aka IAP140.
+
 config ARCH_MVEBU
 	bool "Marvell EBU SoC Family"
 	select ARMADA_AP806_SYSCON
@@ -266,7 +315,7 @@ config ARCH_QCOM
 	bool "Qualcomm Platforms"
 	select GPIOLIB
 	select PINCTRL
-	select HAVE_PWRCTL if PCI
+	select HAVE_PWRCTRL if PCI
 	help
 	  This enables support for the ARMv8 based Qualcomm chipsets.
 
@@ -304,11 +353,16 @@ config ARCH_INTEL_SOCFPGA
 	  Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform,
 	  Agilex and eASIC N5X.
 
+config ARCH_SOPHGO
+	bool "Sophgo SoCs"
+	select ARCH_HAS_RESET_CONTROLLER
+	help
+	  This enables support for Sophgo SoC platform hardware.
+
 config ARCH_STM32
 	bool "STMicroelectronics STM32 SoC Family"
 	select GPIOLIB
 	select PINCTRL
-	select PINCTRL_STM32MP257
 	select ARM_SMC_MBOX
 	select ARM_SCMI_PROTOCOL
 	select REGULATOR
@@ -318,6 +372,10 @@ config ARCH_STM32
 	help
 	  This enables support for ARMv8 based STMicroelectronics
 	  STM32 family, including:
+		- STM32MP21:
+			- STM32MP211, STM32MP213, STM32MP215.
+		- STM32MP23:
+			- STM32MP231, STM32MP233, STM32MP235.
 		- STM32MP25:
 			- STM32MP251, STM32MP253, STM32MP255 and STM32MP257.
 
@@ -371,13 +429,12 @@ config ARCH_UNIPHIER
 	  This enables support for Socionext UniPhier SoC family.
 
 config ARCH_VEXPRESS
-	bool "ARMv8 software model (Versatile Express)"
+	bool "ARM Ltd Platforms"
 	select GPIOLIB
 	select PM
 	select PM_GENERIC_DOMAINS
 	help
-	  This enables support for the ARMv8 software model (Versatile
-	  Express).
+	  This enables support for the ARM Ltd Platforms.
 
 config ARCH_VISCONTI
 	bool "Toshiba Visconti SoC Family"
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index f6bc3da1ef11..73a10f65ce8b 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -10,20 +10,17 @@
 #
 # Copyright (C) 1995-2001 by Russell King
 
-LDFLAGS_vmlinux	:=--no-undefined -X
+LDFLAGS_vmlinux	:=--no-undefined -X --pic-veneer
 
 ifeq ($(CONFIG_RELOCATABLE), y)
 # Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
 # for relative relocs, since this leads to better Image compression
 # with the relocation offsets always being zero.
-LDFLAGS_vmlinux		+= -shared -Bsymbolic -z notext \
-			$(call ld-option, --no-apply-dynamic-relocs)
+LDFLAGS_vmlinux	+= -shared -Bsymbolic -z notext --no-apply-dynamic-relocs
 endif
 
 ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
-  ifeq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
 LDFLAGS_vmlinux	+= --fix-cortex-a53-843419
-  endif
 endif
 
 cc_has_k_constraint := $(call try-run,echo				\
@@ -48,7 +45,11 @@ KBUILD_CFLAGS	+= $(CC_FLAGS_NO_FPU) \
 KBUILD_CFLAGS	+= $(call cc-disable-warning, psabi)
 KBUILD_AFLAGS	+= $(compat_vdso)
 
+ifeq ($(call rustc-min-version, 108500),y)
+KBUILD_RUSTFLAGS += --target=aarch64-unknown-none-softfloat
+else
 KBUILD_RUSTFLAGS += --target=aarch64-unknown-none -Ctarget-feature="-neon"
+endif
 
 KBUILD_CFLAGS	+= $(call cc-option,-mabi=lp64)
 KBUILD_AFLAGS	+= $(call cc-option,-mabi=lp64)
@@ -57,9 +58,11 @@ KBUILD_AFLAGS	+= $(call cc-option,-mabi=lp64)
 ifneq ($(CONFIG_UNWIND_TABLES),y)
 KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables -fno-unwind-tables
 KBUILD_AFLAGS	+= -fno-asynchronous-unwind-tables -fno-unwind-tables
+KBUILD_RUSTFLAGS += -Cforce-unwind-tables=n
 else
 KBUILD_CFLAGS	+= -fasynchronous-unwind-tables
 KBUILD_AFLAGS	+= -fasynchronous-unwind-tables
+KBUILD_RUSTFLAGS += -Cforce-unwind-tables=y -Zuse-sync-unwind=n
 endif
 
 ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
@@ -69,7 +72,7 @@ stack_protector_prepare: prepare0
 				-mstack-protector-guard-reg=sp_el0	  \
 				-mstack-protector-guard-offset=$(shell	  \
 			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}' \
-					include/generated/asm-offsets.h))
+				$(objtree)/include/generated/asm-offsets.h))
 endif
 
 ifeq ($(CONFIG_ARM64_BTI_KERNEL),y)
@@ -99,12 +102,8 @@ endif
 # hardware.
 ifeq ($(CONFIG_AS_HAS_ARMV8_5), y)
   asm-arch := armv8.5-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_4), y)
+else
   asm-arch := armv8.4-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_3), y)
-  asm-arch := armv8.3-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_2), y)
-  asm-arch := armv8.2-a
 endif
 
 ifdef asm-arch
@@ -114,6 +113,7 @@ endif
 
 ifeq ($(CONFIG_SHADOW_CALL_STACK), y)
 KBUILD_CFLAGS	+= -ffixed-x18
+KBUILD_RUSTFLAGS += -Zfixed-x18
 endif
 
 ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
@@ -194,16 +194,6 @@ install zinstall:
 
 archprepare:
 	$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
-ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
-  ifneq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
-	@echo "warning: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum" >&2
-  endif
-endif
-ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS),y)
-  ifneq ($(CONFIG_ARM64_LSE_ATOMICS),y)
-	@echo "warning: LSE atomics not supported by binutils" >&2
-  endif
-endif
 
 ifeq ($(KBUILD_EXTMOD),)
 # We need to generate vdso-offsets.h before compiling certain files in kernel/.
diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile
index 607a67a649c4..b5a08333bc57 100644
--- a/arch/arm64/boot/Makefile
+++ b/arch/arm64/boot/Makefile
@@ -17,7 +17,7 @@
 OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 
 targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo \
-	Image.zst image.fit
+	Image.zst Image.xz image.fit
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
@@ -40,6 +40,9 @@ $(obj)/Image.lzo: $(obj)/Image FORCE
 $(obj)/Image.zst: $(obj)/Image FORCE
 	$(call if_changed,zstd)
 
+$(obj)/Image.xz: $(obj)/Image FORCE
+	$(call if_changed,xzkern)
+
 $(obj)/image.fit: $(obj)/Image $(obj)/dts/dtbs-list FORCE
 	$(call if_changed,fit)
 
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 21cd3a87f385..b0844404eda1 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -9,9 +9,12 @@ subdir-y += amlogic
 subdir-y += apm
 subdir-y += apple
 subdir-y += arm
+subdir-y += axiado
 subdir-y += bitmain
+subdir-y += blaize
 subdir-y += broadcom
 subdir-y += cavium
+subdir-y += cix
 subdir-y += exynos
 subdir-y += freescale
 subdir-y += hisilicon
@@ -27,6 +30,7 @@ subdir-y += realtek
 subdir-y += renesas
 subdir-y += rockchip
 subdir-y += socionext
+subdir-y += sophgo
 subdir-y += sprd
 subdir-y += st
 subdir-y += synaptics
diff --git a/arch/arm64/boot/dts/airoha/en7581-evb.dts b/arch/arm64/boot/dts/airoha/en7581-evb.dts
index cf58e43dd5b2..dae9968a4ff6 100644
--- a/arch/arm64/boot/dts/airoha/en7581-evb.dts
+++ b/arch/arm64/boot/dts/airoha/en7581-evb.dts
@@ -24,3 +24,85 @@
 		reg = <0x0 0x80000000 0x2 0x00000000>;
 	};
 };
+
+&spi_nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		bootloader@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		art@200000 {
+			label = "art";
+			reg = <0x00200000 0x00400000>;
+		};
+
+		tclinux@600000 {
+			label = "tclinux";
+			reg = <0x00600000 0x03200000>;
+		};
+
+		tclinux_slave@3800000 {
+			label = "tclinux_alt";
+			reg = <0x03800000 0x03200000>;
+		};
+
+		rootfs_data@6a00000 {
+			label = "rootfs_data";
+			reg = <0x06a00000 0x01400000>;
+		};
+
+		reserved_bmt@7e00000 {
+			label = "reserved_bmt";
+			reg = <0x07e00000 0x00200000>;
+			read-only;
+		};
+	};
+};
+
+&en7581_pinctrl {
+	gpio-ranges = <&en7581_pinctrl 0 13 47>;
+
+	pcie0_rst_pins: pcie0-rst-pins {
+		conf {
+			pins = "pcie_reset0";
+			drive-open-drain = <1>;
+		};
+	};
+
+	pcie1_rst_pins: pcie1-rst-pins {
+		conf {
+			pins = "pcie_reset1";
+			drive-open-drain = <1>;
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_rst_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_rst_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+};
+
+&gdm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/airoha/en7581.dtsi b/arch/arm64/boot/dts/airoha/en7581.dtsi
index 55eb1762fb11..ff6908a76e8e 100644
--- a/arch/arm64/boot/dts/airoha/en7581.dtsi
+++ b/arch/arm64/boot/dts/airoha/en7581.dtsi
@@ -2,6 +2,8 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/en7523-clk.h>
+#include <dt-bindings/reset/airoha,en7581-reset.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -122,6 +124,12 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 
+	clk20m: clock-20000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -142,6 +150,141 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 		};
 
+		spi@1fa10000 {
+			compatible = "airoha,en7581-snand";
+			reg = <0x0 0x1fa10000 0x0 0x140>,
+			      <0x0 0x1fa11000 0x0 0x160>;
+
+			clocks = <&scuclk EN7523_CLK_SPI>;
+			clock-names = "spi";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			spi_nand: nand@0 {
+				compatible = "spi-nand";
+				reg = <0>;
+
+				spi-max-frequency = <50000000>;
+				spi-tx-bus-width = <1>;
+				spi-rx-bus-width = <2>;
+			};
+		};
+
+		scuclk: clock-controller@1fb00000 {
+			compatible = "airoha,en7581-scu";
+			reg = <0x0 0x1fb00000 0x0 0x970>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pbus_csr: syscon@1fbe3400 {
+			compatible = "airoha,en7581-pbus-csr", "syscon";
+			reg = <0x0 0x1fbe3400 0x0 0xff>;
+		};
+
+		pciephy: phy@1fa5a000 {
+			compatible = "airoha,en7581-pcie-phy";
+			reg = <0x0 0x1fa5a000 0x0 0xfff>,
+			      <0x0 0x1fa5b000 0x0 0xfff>,
+			      <0x0 0x1fa5c000 0x0 0xfff>,
+			      <0x0 0x1fc10044 0x0 0x4>,
+			      <0x0 0x1fc30044 0x0 0x4>,
+			      <0x0 0x1fc15030 0x0 0x104>;
+			reg-names = "csr-2l", "pma0", "pma1",
+				    "p0-xr-dtime", "p1-xr-dtime",
+				    "rx-aeq";
+			#phy-cells = <0>;
+		};
+
+		pcie0: pcie@1fc00000 {
+			compatible = "airoha,en7581-pcie";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			reg = <0x0 0x1fc00000 0x0 0x1670>;
+			reg-names = "pcie-mac";
+
+			clocks = <&scuclk EN7523_CLK_PCIE>;
+			clock-names = "sys-ck";
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			ranges = <0x02000000 0 0x20000000 0x0 0x20000000 0 0x4000000>;
+
+			resets = <&scuclk EN7581_PCIE0_RST>,
+				 <&scuclk EN7581_PCIE1_RST>,
+				 <&scuclk EN7581_PCIE2_RST>;
+			reset-names = "phy-lane0", "phy-lane1", "phy-lane2";
+
+			mediatek,pbus-csr = <&pbus_csr 0x0 0x4>;
+
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@1fc20000 {
+			compatible = "airoha,en7581-pcie";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			reg = <0x0 0x1fc20000 0x0 0x1670>;
+			reg-names = "pcie-mac";
+
+			clocks = <&scuclk EN7523_CLK_PCIE>;
+			clock-names = "sys-ck";
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			ranges = <0x02000000 0 0x24000000 0x0 0x24000000 0 0x4000000>;
+
+			resets = <&scuclk EN7581_PCIE0_RST>,
+				 <&scuclk EN7581_PCIE1_RST>,
+				 <&scuclk EN7581_PCIE2_RST>;
+			reset-names = "phy-lane0", "phy-lane1", "phy-lane2";
+
+			mediatek,pbus-csr = <&pbus_csr 0x8 0xc>;
+
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
 		uart1: serial@1fbf0000 {
 			compatible = "ns16550";
 			reg = <0x0 0x1fbf0000 0x0 0x30>;
@@ -150,5 +293,107 @@
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <1843200>;
 		};
+
+		rng@1faa1000 {
+			compatible = "airoha,en7581-trng";
+			reg = <0x0 0x1faa1000 0x0 0xc04>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		system-controller@1fbf0200 {
+			compatible = "airoha,en7581-gpio-sysctl", "syscon",
+				     "simple-mfd";
+			reg = <0x0 0x1fbf0200 0x0 0xc0>;
+
+			en7581_pinctrl: pinctrl {
+				compatible = "airoha,en7581-pinctrl";
+
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		i2c0: i2c@1fbf8000 {
+			compatible = "mediatek,mt7621-i2c";
+			reg = <0x0 0x1fbf8000 0x0 0x100>;
+
+			resets = <&scuclk EN7581_I2C2_RST>;
+
+			clocks = <&clk20m>;
+			clock-frequency = <100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@1fbf8100 {
+			compatible = "mediatek,mt7621-i2c";
+			reg = <0x0 0x1fbf8100 0x0 0x100>;
+
+			resets = <&scuclk EN7581_I2C_MASTER_RST>;
+
+			clocks = <&clk20m>;
+			clock-frequency = <100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		eth: ethernet@1fb50000 {
+			compatible = "airoha,en7581-eth";
+			reg = <0 0x1fb50000 0 0x2600>,
+			      <0 0x1fb54000 0 0x2000>,
+			      <0 0x1fb56000 0 0x2000>;
+			reg-names = "fe", "qdma0", "qdma1";
+
+			resets = <&scuclk EN7581_FE_RST>,
+				 <&scuclk EN7581_FE_PDMA_RST>,
+				 <&scuclk EN7581_FE_QDMA_RST>,
+				 <&scuclk EN7581_XSI_MAC_RST>,
+				 <&scuclk EN7581_DUAL_HSI0_MAC_RST>,
+				 <&scuclk EN7581_DUAL_HSI1_MAC_RST>,
+				 <&scuclk EN7581_HSI_MAC_RST>,
+				 <&scuclk EN7581_XFP_MAC_RST>;
+			reset-names = "fe", "pdma", "qdma",
+				      "xsi-mac", "hsi0-mac", "hsi1-mac",
+				      "hsi-mac", "xfp-mac";
+
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gdm1: ethernet@1 {
+				compatible = "airoha,eth-mac";
+				reg = <1>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <10000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 0db7b60b49a1..2edfa7bf4ab3 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h64-remix-mini-pc.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a133-liontron-h-a133l.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
@@ -40,6 +41,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-x96q.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
@@ -48,6 +50,12 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-longanpi-3h.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-yuzukihd-chameleon.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-2024.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-h.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-a527-cubie-a5e.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-h728-x96qpro+.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-avaota-a1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-orangepi-4a.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
index f5c5c1464482..a7e3be0155a8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
@@ -6,6 +6,9 @@
 /dts-v1/;
 
 #include "sun50i-a100.dtsi"
+#include "sun50i-a100-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
 
 /{
 	model = "Allwinner A100 Perf1";
@@ -20,6 +23,26 @@
 	};
 };
 
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_aldo1>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &pio {
 	vcc-pb-supply = <&reg_dcdc1>;
 	vcc-pc-supply = <&reg_eldo1>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
new file mode 100644
index 000000000000..c6a2efa037dc
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
+// Copyright (c) 2020 ShuoSheng Huang <huangshuosheng@allwinnertech.com>
+
+/ {
+	cpu_opp_table: opp-table-cpu {
+		compatible = "allwinner,sun50i-a100-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+
+		opp-408000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <408000000>;
+
+			opp-microvolt-speed0 = <900000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed2 = <900000>;
+		};
+
+		opp-600000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <600000000>;
+
+			opp-microvolt-speed0 = <900000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed2 = <900000>;
+		};
+
+		opp-816000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <816000000>;
+
+			opp-microvolt-speed0 = <940000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed2 = <900000>;
+		};
+
+		opp-1080000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1080000000>;
+
+			opp-microvolt-speed0 = <1020000>;
+			opp-microvolt-speed1 = <980000>;
+			opp-microvolt-speed2 = <950000>;
+		};
+
+		opp-1200000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1200000000>;
+
+			opp-microvolt-speed0 = <1100000>;
+			opp-microvolt-speed1 = <1020000>;
+			opp-microvolt-speed2 = <1000000>;
+		};
+
+		opp-1320000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1320000000>;
+
+			opp-microvolt-speed0 = <1160000>;
+			opp-microvolt-speed1 = <1060000>;
+			opp-microvolt-speed2 = <1030000>;
+		};
+
+		opp-1464000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1464000000>;
+
+			opp-microvolt-speed0 = <1180000>;
+			opp-microvolt-speed1 = <1180000>;
+			opp-microvolt-speed2 = <1130000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index a3dccf193765..bb5f9e4f3d42 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -23,30 +23,43 @@
 			device_type = "cpu";
 			reg = <0x0>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <0x1>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <0x2>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <0x3>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -92,6 +105,39 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0x3fffffff>;
 
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun50i-a100-system-control",
+				     "allwinner,sun50i-a64-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a1: sram@20000 {
+				compatible = "mmio-sram";
+				reg = <0x00020000 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00020000 0x4000>;
+			};
+
+			sram_c: sram@24000 {
+				compatible = "mmio-sram";
+				reg = <0x024000 0x21000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x024000 0x21000>;
+			};
+
+			sram_a2: sram@100000 {
+				compatible = "mmio-sram";
+				reg = <0x0100000 0x14000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x0100000 0x14000>;
+			};
+		};
+
 		ccu: clock@3001000 {
 			compatible = "allwinner,sun50i-a100-ccu";
 			reg = <0x03001000 0x1000>;
@@ -133,6 +179,18 @@
 			ths_calibration: calib@14 {
 				reg = <0x14 8>;
 			};
+
+			cpu_speed_grade: cpu-speed-grade@1c {
+				reg = <0x1c 0x2>;
+			};
+		};
+
+		watchdog@30090a0 {
+			compatible = "allwinner,sun50i-a100-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x030090a0 0x20>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dcxo24M>;
 		};
 
 		pio: pinctrl@300b000 {
@@ -152,12 +210,101 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC0", "PC1", "PC5", "PC6",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC13", "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			rgmii0_pins: rgmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10",
+				       "PH14", "PH15", "PH16", "PH17", "PH18";
+				function = "emac0";
+				drive-strength = <40>;
+			};
+
+			rmii0_pins: rmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10";
+				function = "emac0";
+				drive-strength = <40>;
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB9", "PB10";
 				function = "uart0";
 			};
 		};
 
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun50i-a100-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun50i-a100-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun50i-a100-emmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		uart0: serial@5000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x05000000 0x400>;
@@ -273,6 +420,26 @@
 			#size-cells = <0>;
 		};
 
+		emac0: ethernet@5020000 {
+			compatible = "allwinner,sun50i-a100-emac",
+				     "allwinner,sun50i-a64-emac";
+			reg = <0x5020000 0x10000>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			syscon = <&syscon>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		ths: thermal-sensor@5070400 {
 			compatible = "allwinner,sun50i-a100-ths";
 			reg = <0x05070400 0x100>;
@@ -285,6 +452,97 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		usb_otg: usb@5100000 {
+			compatible = "allwinner,sun50i-a100-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@5100400 {
+			compatible = "allwinner,sun50i-a100-usb-phy",
+				     "allwinner,sun20i-d1-usb-phy";
+			reg = <0x05100400 0x100>,
+			      <0x05101800 0x100>,
+			      <0x05200800 0x100>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-a100-ehci",
+				     "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-a100-ohci",
+				     "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@5200000 {
+			compatible = "allwinner,sun50i-a100-ehci",
+				     "generic-ehci";
+			reg = <0x05200000 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@5200400 {
+			compatible = "allwinner,sun50i-a100-ohci",
+				     "generic-ohci";
+			reg = <0x05200400 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		r_ccu: clock@7010000 {
 			compatible = "allwinner,sun50i-a100-r-ccu";
 			reg = <0x07010000 0x300>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts b/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts
new file mode 100644
index 000000000000..90a50910f07b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a100.dtsi"
+#include "sun50i-a100-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/{
+	model = "Liontron H-A133L";
+	compatible = "liontron,h-a133l", "allwinner,sun50i-a100";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from a 12V->5V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii0_pins>;
+	phy-handle = <&rmii_phy>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mdio0 {
+	reset-gpios = <&pio 7 12 GPIO_ACTIVE_LOW>; /* PH12 */
+	reset-delay-us = <2000>;
+	reset-post-delay-us = <2000>;
+
+	rmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp803: pmic@34 {
+		compatible = "x-powers,axp803";
+		reg = <0x34>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-codec-avcc";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dram-1";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-pl";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io-usb-pd-emmc";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <810000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-cpux";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-usb-cpus";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <950000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vcc-dram";
+};
+
+/* DCDC6 unused */
+/* DLDO3 unused */
+/* DLDO4 unused */
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pc-emmc";
+};
+
+/* ELDO2 unused */
+/* ELDO3 unused */
+
+&reg_fldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-cpus-usb";
+};
+
+/* reg_drivevbus unused */
+/* dc1sw unused */
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";       /* USB A type receptacle, always powered */
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 09e71fd60785..3256acec1ff9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -124,6 +124,17 @@
 	status = "okay";
 };
 
+/* On Wifi/BT connector */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "disabled";
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -286,6 +297,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 379c2c8466f5..86d44349e095 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -390,6 +390,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 6eab61a12cd8..4bc6c1ef2cde 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -188,12 +188,30 @@
 &i2c1 {
 	status = "okay";
 
+	/* Alternative magnetometer */
+	af8133j: magnetometer@1c {
+		compatible = "voltafield,af8133j";
+		reg = <0x1c>;
+		reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>;
+		avdd-supply = <&reg_dldo1>;
+		dvdd-supply = <&reg_dldo1>;
+		mount-matrix = "0", "-1", "0",
+				"-1", "0", "0",
+				"0", "0", "-1";
+
+		/* status will be fixed up in firmware */
+		status = "disabled";
+	};
+
 	/* Magnetometer */
 	lis3mdl: magnetometer@1e {
 		compatible = "st,lis3mdl-magn";
 		reg = <0x1e>;
 		vdd-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_dldo1>;
+		mount-matrix = "0", "1", "0",
+				"-1", "0", "0",
+				"0", "0", "1";
 	};
 
 	/* Light/proximity sensor */
@@ -212,6 +230,9 @@
 		interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
 		vdd-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_dldo1>;
+		mount-matrix = "0", "1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "1";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index be2347c8f267..231e652cab67 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -103,6 +103,17 @@
 	};
 };
 
+/* On Wifi/BT connector */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "disabled";
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
@@ -175,6 +186,14 @@
 	status = "okay";
 };
 
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
 /* On Pi-2 connector */
 &uart2 {
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index b407e1dd08a7..ec055510af8b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -369,6 +369,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index e868ca5ae753..0fecf0abb204 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -263,6 +263,14 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
+
+			trips {
+				gpu0_crit: gpu0-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
 		gpu1_thermal: gpu1-thermal {
@@ -270,6 +278,14 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 2>;
+
+			trips {
+				gpu1_crit: gpu1-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -429,6 +445,8 @@
 			clock-names = "ahb", "tcon-ch0";
 			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
+			assigned-clocks = <&ccu CLK_TCON0>;
+			assigned-clock-parents = <&ccu CLK_PLL_MIPI>;
 			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
 			reset-names = "lcd", "lvds";
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
index bb2cde59bd03..7906b79c0389 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -65,6 +66,11 @@
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
@@ -73,6 +79,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
new file mode 100644
index 000000000000..b2275eb3d55b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "X96Q";
+	compatible = "amediatech,x96q", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 7 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+/* TODO: EMAC1 connected to AC200 PHY */
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc0 {
+	/* microSD */
+	vmmc-supply = <&reg_aldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* TODO: XRadio XR819 WLAN @ mmc1 */
+
+&mmc2 {
+	/* eMMC */
+	vmmc-supply = <&reg_aldo1>;
+	vqmmc-supply = <&reg_bldo1>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <100000000>; /* required for stable operation */
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp305: pmic@36 {
+		compatible = "x-powers,axp305", "x-powers,axp805",
+			     "x-powers,axp806";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x36>;
+
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			dcdcb {
+				/* unused */
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+
+			dcdce {
+				/* unused */
+			};
+
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			aldo2 {
+				/* unused */
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			bldo2 {
+				/* unused */
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			cldo1 {
+				/* unused */
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptacle */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index b69032c44557..18fa541795a6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -45,16 +45,40 @@
 		startup-delay-us = <100000>;
 		enable-active-high;
 		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	reg_gmac_2v5: gmac-2v5 {
+		/* 2V5 supply for GMAC PHY IO */
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-2v5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board 5V supply from micro USB or pin headers */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 	};
 
 	reg_vcc3v3: vcc3v3 {
+		/* board 3V3 supply by SY8089A */
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
 	};
 
 	vdd_cpux: gpio-regulator {
+		/* cpu voltage regulator MP2143DJ */
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-cpux";
 		regulator-type = "voltage";
@@ -66,6 +90,7 @@
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
 		gpios-states = <0x1>;
 		states = <1100000 0>, <1300000 1>;
+		vin-supply = <&reg_vcc5v>;
 	};
 
 	wifi_pwrseq: pwrseq {
@@ -111,6 +136,7 @@
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
 	status = "okay";
 };
 
@@ -146,6 +172,18 @@
 	status = "okay";
 };
 
+&pio {
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pd-supply = <&reg_gmac_2v5>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_vcc3v3>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
index 05486cccee1c..128295f5a5d6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -88,6 +88,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
index 3a7ee44708a2..44fdc8b3f79d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
@@ -157,6 +157,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index ce3ae19e72db..0f29da7d51e6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -153,6 +153,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index b699bb900e13..d4fc4e60e4e7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -153,6 +153,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
index ae85131aac9c..3322cc4d9aa4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -82,6 +82,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index 734481e998b8..3eb986c354a9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -79,6 +79,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index d3caf27b6a55..01a29c1988a6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -16,7 +16,6 @@
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -26,7 +25,6 @@
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -36,7 +34,6 @@
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -46,7 +43,6 @@
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 	};
@@ -207,7 +203,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu_hot_trip>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 3be1e8c2fdb9..2c64d834a2c4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -129,6 +129,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -151,28 +152,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	linux,rc-map-name = "rc-beelink-gs1";
-	status = "okay";
-};
-
-&r_pio {
-	/*
-	 * FIXME: We can't add that supply for now since it would
-	 * create a circular dependency between pinctrl, the regulator
-	 * and the RSB Bus.
-	 *
-	 * vcc-pl-supply = <&reg_aldo1>;
-	 */
-	vcc-pm-supply = <&reg_aldo1>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -290,6 +275,22 @@
 	};
 };
 
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * PL0 and PL1 are used for PMIC I2C
+	 * don't enable the pl-supply else
+	 * it will fail at boot
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
 &spdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spdif_tx_pin>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 6c3bfe3d09d9..dc7381c944c9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -131,6 +131,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -143,7 +144,7 @@
 	non-removable;
 	status = "okay";
 
-	brcm: sdio-wifi@1 {
+	brcm: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&r_pio>;
@@ -175,16 +176,12 @@
 	vcc-pg-supply = <&reg_vcc_wifi_io>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -295,6 +292,10 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
index a3f65a45bd26..0911c537cc6b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -28,7 +28,7 @@
 	non-removable;
 	status = "okay";
 
-	brcm: sdio-wifi@1 {
+	brcm: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&r_pio>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index 13b07141c334..e34dbb992021 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -94,6 +94,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -112,20 +113,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_pio {
-	vcc-pm-supply = <&reg_bldo3>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -240,6 +233,14 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index c8b275552872..fa7a765ee828 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -133,6 +133,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
index 855b7d43bc50..bb7de37c0d58 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -124,6 +124,7 @@
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 2301c59b41b1..73e8604315c5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -27,7 +27,6 @@
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -44,7 +43,6 @@
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -61,7 +59,6 @@
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -78,7 +75,6 @@
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
index d12b01c5f41b..bebfeb2a337a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
@@ -67,6 +67,11 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dldo1>;
 	/* Card detection pin is not connected */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
index fc7315b94406..a8644fb52b04 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -59,6 +59,11 @@
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -72,6 +77,10 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdio0 {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -81,6 +90,7 @@
 
 &mmc0 {
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
index a360d8567f95..f2e3300e078a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -24,6 +24,10 @@
 	phy-supply = <&reg_dcdce>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdce>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
index 26d25b5b59e0..085f3e4e8eaa 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
@@ -33,6 +33,11 @@
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdca>;
 };
@@ -45,6 +50,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
@@ -52,6 +62,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_dcdce>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
index b29ce7321317..ceedae9e399b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -150,6 +150,21 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x40000000>;
 
+		gpu: gpu@1800000 {
+			compatible = "allwinner,sun50i-h616-mali",
+				     "arm,mali-bifrost";
+			reg = <0x1800000 0x40000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU0>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			power-domains = <&prcm_ppu 2>;
+			resets = <&ccu RST_BUS_GPU>;
+			status = "disabled";
+		};
+
 		crypto: crypto@1904000 {
 			compatible = "allwinner,sun50i-h616-crypto";
 			reg = <0x01904000 0x800>;
@@ -630,21 +645,6 @@
 			};
 		};
 
-		spdif: spdif@5093000 {
-			compatible = "allwinner,sun50i-h616-spdif";
-			reg = <0x05093000 0x400>;
-			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
-			clock-names = "apb", "spdif";
-			resets = <&ccu RST_BUS_SPDIF>;
-			dmas = <&dma 2>;
-			dma-names = "tx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spdif_tx_pin>;
-			#sound-dai-cells = <0>;
-			status = "disabled";
-		};
-
 		gpadc: adc@5070000 {
 			compatible = "allwinner,sun50i-h616-gpadc",
 				     "allwinner,sun20i-d1-gpadc";
@@ -679,6 +679,35 @@
 			status = "disabled";
 		};
 
+		spdif: spdif@5093000 {
+			compatible = "allwinner,sun50i-h616-spdif";
+			reg = <0x05093000 0x400>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			resets = <&ccu RST_BUS_SPDIF>;
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		codec: codec@5096000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h616-codec";
+			reg = <0x05096000 0x31c>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_AUDIO_CODEC>,
+				 <&ccu CLK_AUDIO_CODEC_1X>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_AUDIO_CODEC>;
+			dmas = <&dma 6>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
 		usbotg: usb@5100000 {
 			compatible = "allwinner,sun50i-h616-musb",
 				     "allwinner,sun8i-h3-musb";
@@ -860,6 +889,12 @@
 			#reset-cells = <1>;
 		};
 
+		prcm_ppu: power-controller@7010250 {
+			compatible = "allwinner,sun50i-h616-prcm-ppu";
+			reg = <0x07010250 0x10>;
+			#power-domain-cells = <1>;
+		};
+
 		nmi_intc: interrupt-controller@7010320 {
 			compatible = "allwinner,sun50i-h616-nmi",
 				     "allwinner,sun9i-a80-nmi";
@@ -914,6 +949,8 @@
 			dmas = <&dma 48>, <&dma 48>;
 			dma-names = "rx", "tx";
 			resets = <&r_ccu RST_R_APB2_I2C>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
index e92d150aaf1c..3f416d129b72 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
@@ -10,6 +10,11 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts
index 18b29c6b867f..16c68177ff69 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts
@@ -111,6 +111,7 @@
 };
 
 &mmc0 {
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;	/* PF6 */
 	vmmc-supply = <&reg_vcc3v3>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
index 6a4f0da97233..b340bbcb710d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
@@ -54,6 +54,11 @@
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
@@ -64,6 +69,11 @@
 
 /* USB 2 & 3 are on the FPC connector (or the exansion board) */
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc0 {
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
 	bus-width = <4>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
index e1cd7572a14c..c51d4d9120de 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -27,6 +27,10 @@
 	motorcomm,clk-out-frequency-hz = <125000000>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+};
+
 &mmc0 {
 	/*
 	 * The schematic shows the card detect pin wired up to PF6, via an
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
index d6631bfe629f..efe0faa252f5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
@@ -52,6 +52,11 @@
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
@@ -64,6 +69,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
@@ -71,6 +81,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_dldo1>;
 	cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>;	/* PI16 */
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts
new file mode 100644
index 000000000000..eae56908b9b4
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2024 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Yuzuki Chameleon";
+	compatible = "yuzukihd,chameleon", "allwinner,sun50i-h618";
+
+	aliases {
+		ethernet1 = &sdio_wifi;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; /* PG11 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
+	vmmc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 12 IRQ_TYPE_LEVEL_LOW>;  /* PG12 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-3_3v;
+	non-removable;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;	/* via VCC_IO */
+	vcc-pg-supply = <&reg_dldo1>;
+	vcc-ph-supply = <&reg_dldo1>;	/* via VCC_IO */
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 2 IRQ_TYPE_LEVEL_LOW>;	/* PC2 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL, so needs to be always on. */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+/* Connected to the Bluetooth UART pins of the XR829 Wifi/BT chip. */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb1_vbus-supply = <&reg_vcc5v>;
+	usb2_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
index afb49e65859f..1a750c5f6fac 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
@@ -21,6 +21,12 @@
 		serial0 = &uart0;
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <1024000>;
+		voltage-max-design-microvolt = <4200000>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -161,6 +167,12 @@
 			gpios = <&pio 8 12 GPIO_ACTIVE_HIGH>; /* PI12 */
 			default-state = "on";
 		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>; /* PI11 */
+		};
 	};
 
 	reg_vcc5v: regulator-vcc5v { /* USB-C power input */
@@ -171,6 +183,15 @@
 	};
 };
 
+&codec {
+	/* Both speakers and headphone jack connected to 74HC4052D analog mux*/
+	allwinner,audio-routing = "Speaker", "LINEOUT",
+				  "Headphone", "LINEOUT";
+	allwinner,pa-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; // PI5
+	hp-det-gpios = <&pio 8 3 GPIO_ACTIVE_HIGH>; // PI3
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc1>;
 };
@@ -179,6 +200,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_cldo3>;
 	disable-wp;
@@ -201,12 +227,12 @@
 	vcc-pi-supply = <&reg_cldo3>;
 };
 
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp717: pmic@3a3 {
+	axp717: pmic@34 {
 		compatible = "x-powers,axp717";
-		reg = <0x3a3>;
+		reg = <0x34>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
 		interrupt-parent = <&nmi_intc>;
@@ -217,6 +243,17 @@
 		vin3-supply = <&reg_vcc5v>;
 		vin4-supply = <&reg_vcc5v>;
 
+		axp_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery_power: battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			monitored-battery = <&battery>;
+			x-powers,no-thermistor;
+		};
+
 		regulators {
 			reg_dcdc1: dcdc1 {
 				regulator-always-on;
@@ -254,7 +291,7 @@
 			reg_aldo4: aldo4 {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc-pg";
+				regulator-name = "avcc";
 			};
 
 			reg_bldo1: bldo1 {
@@ -277,7 +314,10 @@
 			};
 
 			reg_cldo1: cldo1 {
-				/* 3.3v - audio codec - not yet implemented */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-spkr-amp";
 			};
 
 			reg_cldo2: cldo2 {
@@ -303,10 +343,24 @@
 				regulator-name = "boost";
 			};
 
+			/*
+			 * Regulator function is unknown, but reading
+			 * GPIO values in bootloader is inconsistent
+			 * on reboot if this is disabled. Setting to
+			 * default value from regulator OTP mem.
+			 */
 			reg_cpusldo: cpusldo {
-				/* unused */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
 			};
 		};
+
+		usb_power: usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+			input-current-limit-microamp = <1500000>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
index ff453336eab1..bef4d107482f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
@@ -71,6 +71,25 @@
 			    <&pio 8 2 GPIO_ACTIVE_LOW>;
 		#mux-control-cells = <0>;
 	};
+
+	reg_vcc3v8_usb: regulator-vcc3v8-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pio 4 5 GPIO_ACTIVE_HIGH>; /* PE5 */
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc3v8-usb";
+	};
+
+	reg_vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pio 8 7 GPIO_ACTIVE_HIGH>; /* PI7 */
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0-usb";
+		vin-supply = <&reg_vcc3v8_usb>;
+	};
 };
 
 &gpadc {
@@ -113,3 +132,7 @@
 		function = "gpio_out";
 	};
 };
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0_usb>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts
new file mode 100644
index 000000000000..0cf16dc903cd
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>.
+ */
+
+#include <dt-bindings/input/gpio-keys.h>
+#include "sun50i-h700-anbernic-rg35xx-plus.dts"
+
+/ {
+	model = "Anbernic RG35XX SP";
+	compatible = "anbernic,rg35xx-sp", "allwinner,sun50i-h700";
+
+	gpio-keys-lid {
+		compatible = "gpio-keys";
+
+		lid-switch {
+			label = "Lid Switch";
+			gpios = <&pio 4 7 GPIO_ACTIVE_LOW>; /* PE7 */
+			linux,can-disable;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+};
+
+&r_i2c {
+	rtc_ext: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
new file mode 100644
index 000000000000..7b36c47a3a13
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -0,0 +1,735 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2023-2024 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun55i-a523-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-mcu-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-r-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-mcu-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-r-ccu.h>
+#include <dt-bindings/power/allwinner,sun55i-a523-ppu.h>
+#include <dt-bindings/power/allwinner,sun55i-a523-pck-600.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@400 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x400>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@500 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x500>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@600 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x600>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@700 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x700>;
+			enable-method = "psci";
+		};
+	};
+
+	osc24M: osc24M-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		gpu: gpu@1800000 {
+			compatible = "allwinner,sun55i-a523-mali",
+				     "arm,mali-valhall-jm";
+			reg = <0x1800000 0x10000>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			power-domains = <&pck600 PD_GPU>;
+			resets = <&ccu RST_BUS_GPU>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@2000000 {
+			compatible = "allwinner,sun55i-a523-pinctrl";
+			reg = <0x2000000 0x800>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5";
+				allwinner,pinmux = <2>;
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0" ,"PG1", "PG2", "PG3", "PG4", "PG5";
+				allwinner,pinmux = <2>;
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC0", "PC1" ,"PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11", "PC13", "PC14",
+				       "PC15", "PC16";
+				allwinner,pinmux = <3>;
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			rgmii0_pins: rgmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10",
+				       "PH14", "PH15", "PH16", "PH17", "PH18";
+				allwinner,pinmux = <5>;
+				function = "gmac0";
+				drive-strength = <40>;
+				bias-disable;
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				allwinner,pinmux = <2>;
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+				allwinner,pinmux = <2>;
+			};
+
+			/omit-if-no-ref/
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+				allwinner,pinmux = <2>;
+			};
+		};
+
+		ccu: clock-controller@2001000 {
+			compatible = "allwinner,sun55i-a523-ccu";
+			reg = <0x02001000 0x1000>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>, <&rtc CLK_OSC32K_FANOUT>;
+			clock-names = "hosc", "losc",
+				      "iosc", "losc-fanout";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		wdt: watchdog@2050000 {
+			compatible = "allwinner,sun55i-a523-wdt";
+			reg = <0x2050000 0x20>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			status = "okay";
+		};
+
+		uart0: serial@2500000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500000 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@2500400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500400 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@2500800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500800 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@2500c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500c00 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@2501000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501000 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@2501400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501400 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@2501800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501800 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART6>;
+			resets = <&ccu RST_BUS_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@2501c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501c00 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART7>;
+			resets = <&ccu RST_BUS_UART7>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2502000 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502000 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@2502400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502400 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@2502800 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502800 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@2502c00 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502c00 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@2503000 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2503000 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5: i2c@2503400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2503400 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C5>;
+			resets = <&ccu RST_BUS_I2C5>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun55i-a523-system-control",
+				     "allwinner,sun50i-a64-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		sid: efuse@3006000 {
+			compatible = "allwinner,sun55i-a523-sid",
+				     "allwinner,sun50i-a64-sid";
+			reg = <0x03006000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		gic: interrupt-controller@3400000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <1>;
+			#interrupt-cells = <3>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			reg = <0x3400000 0x10000>,
+			      <0x3460000 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			dma-noncoherent;
+
+			its: msi-controller@3440000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x3440000 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+				dma-noncoherent;
+			};
+		};
+
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@4100000 {
+			compatible = "allwinner,sun55i-a523-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x4100000 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			extcon = <&usbphy 0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: phy@4100400 {
+			compatible = "allwinner,sun55i-a523-usb-phy",
+				     "allwinner,sun20i-d1-usb-phy";
+			reg = <0x4100400 0x100>,
+			      <0x4101800 0x100>,
+			      <0x4200800 0x100>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&osc24M>,
+				 <&osc24M>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@4101000 {
+			compatible = "allwinner,sun55i-a523-ehci",
+				     "generic-ehci";
+			reg = <0x4101000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@4101400 {
+			compatible = "allwinner,sun55i-a523-ohci",
+				     "generic-ohci";
+			reg = <0x4101400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@4200000 {
+			compatible = "allwinner,sun55i-a523-ehci",
+				     "generic-ehci";
+			reg = <0x4200000 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@4200400 {
+			compatible = "allwinner,sun55i-a523-ohci",
+				     "generic-ohci";
+			reg = <0x4200400 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@4500000 {
+			compatible = "allwinner,sun55i-a523-gmac0",
+				     "allwinner,sun50i-a64-emac";
+			reg = <0x04500000 0x10000>;
+			clocks = <&ccu CLK_BUS_EMAC0>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC0>;
+			reset-names = "stmmaceth";
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rgmii0_pins>;
+			syscon = <&syscon>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		ppu: power-controller@7001400 {
+			compatible = "allwinner,sun55i-a523-ppu";
+			reg = <0x07001400 0x400>;
+			clocks = <&r_ccu CLK_BUS_R_PPU1>;
+			resets = <&r_ccu RST_BUS_R_PPU1>;
+			#power-domain-cells = <1>;
+		};
+
+		r_ccu: clock-controller@7010000 {
+			compatible = "allwinner,sun55i-a523-r-ccu";
+			reg = <0x7010000 0x250>;
+			clocks = <&osc24M>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0_200M>,
+				 <&ccu CLK_PLL_AUDIO0_4X>;
+			clock-names = "hosc",
+				      "losc",
+				      "iosc",
+				      "pll-periph",
+				      "pll-audio";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			assigned-clocks = <&r_ccu CLK_R_AHB>, <&r_ccu CLK_R_APB0>;
+			assigned-clock-rates = <200000000>, <100000000>;
+		};
+
+		nmi_intc: interrupt-controller@7010320 {
+			compatible = "allwinner,sun55i-a523-nmi";
+			reg = <0x07010320 0xc>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun55i-a523-r-pinctrl";
+			reg = <0x7022000 0x800>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB0>,
+				 <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0" ,"PL1";
+				allwinner,pinmux = <2>;
+				function = "r_i2c0";
+			};
+		};
+
+		pck600: power-controller@7060000 {
+			compatible = "allwinner,sun55i-a523-pck-600";
+			reg = <0x07060000 0x8000>;
+			clocks = <&r_ccu CLK_BUS_R_PPU0>;
+			resets = <&r_ccu RST_BUS_R_PPU0>;
+			#power-domain-cells = <1>;
+		};
+
+		r_i2c0: i2c@7081400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_BUS_R_I2C0>;
+			resets = <&r_ccu RST_BUS_R_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		rtc: rtc@7090000 {
+			compatible = "allwinner,sun55i-a523-rtc",
+				     "allwinner,sun50i-r329-rtc";
+			reg = <0x7090000 0x400>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_BUS_R_RTC>,
+				 <&osc24M>,
+				 <&r_ccu CLK_R_AHB>;
+			clock-names = "bus", "hosc", "ahb";
+			#clock-cells = <1>;
+		};
+
+		mcu_ccu: clock-controller@7102000 {
+			compatible = "allwinner,sun55i-a523-mcu-ccu";
+			reg = <0x7102000 0x200>;
+			clocks = <&osc24M>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_AUDIO0_4X>,
+				 <&ccu CLK_PLL_PERIPH0_300M>,
+				 <&ccu CLK_DSP>,
+				 <&ccu CLK_MBUS>,
+				 <&r_ccu CLK_R_AHB>,
+				 <&r_ccu CLK_R_APB0>;
+			clock-names = "hosc",
+				      "losc",
+				      "iosc",
+				      "pll-audio0-4x",
+				      "pll-periph0-300m",
+				      "dsp",
+				      "mbus",
+				      "r-ahb",
+				      "r-apb0";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		npu: npu@7122000 {
+			compatible = "vivante,gc";
+			reg = <0x07122000 0x1000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mcu_ccu CLK_BUS_MCU_NPU_ACLK>,
+				 <&ccu CLK_NPU>,
+				 <&mcu_ccu CLK_BUS_MCU_NPU_HCLK>;
+			clock-names = "bus", "core", "reg";
+			resets = <&mcu_ccu RST_BUS_MCU_NPU>;
+			power-domains = <&ppu PD_NPU>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
new file mode 100644
index 000000000000..f82a8d121697
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2025 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Radxa Cubie A5E";
+	compatible = "radxa,cubie-a5e", "allwinner,sun55i-a527";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-led {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		use-led {
+			function = LED_FUNCTION_ACTIVITY;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>; /* pmic_temp */
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the USB-C connector */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>;	/* PL8 */
+		enable-active-high;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_cldo3>;
+
+	allwinner,tx-delay-ps = <300>;
+	allwinner,rx-delay-ps = <400>;
+
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_cldo3>;
+	vcc-pe-supply = <&reg_aldo2>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_cldo3>;
+	vcc-pj-supply = <&reg_cldo4>;
+	vcc-pk-supply = <&reg_cldo1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@34 {
+		compatible = "x-powers,axp717";
+		reg = <0x34>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* charger mode design but has no battery terminal */
+			status = "disabled";
+		};
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-usb";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-iowifi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pm-lpddr4";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-mipi-cam";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pc-and-their-dog";
+			};
+
+			reg_cldo2: cldo2 {
+				/* not connected */
+			};
+
+			reg_cldo3: cldo3 {
+				/* IO, USB-2, 3V3, card, NAND, sensor, PI */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-spi-ana";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pj-phy";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-mipi-dsi";
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* RISC-V management core supply */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The USB-C port is the primary power supply, so in this configuration
+	 * relies on the other end of the USB cable to supply the VBUS power.
+	 * So use this port in peripheral mode.
+	 * It is possible to supply the board with the 5V pins on the GPIO
+	 * header, and since the DCIN_5V line is hardwired to the USB-C VBUS
+	 * pins, the port turns into a host port, unconditionally supplying
+	 * power. The dr_mode property should be changed to "host" here, if
+	 * users choose this setup.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+/*
+ * The schematic describes USB0_ID (PL10), measuring VBUS_5V, which looks to
+ * be always on. Also there is USB-VBUSDET (PL2), which is measuring the same
+ * VBUS_5V. There is also DCIN_DET, which measures DCIN_5V, so the power
+ * input rail.
+ * None of them seem to make any sense in relation to detecting USB devices
+ * or whether there is power provided via any USB pins: they would always
+ * report high, otherwise the system wouldn't be running.
+ * The AXP717C provides proper USB-C CC pin functionality, but the PMIC is
+ * not connected to those pins of the USB-C connector.
+ */
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb1_vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts
new file mode 100644
index 000000000000..a96927fbdadd
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2024 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "X96Q Pro+";
+	compatible = "amediatech,x96q-pro-plus", "allwinner,sun55i-h728";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the barrel plug */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* 3.3V dummy supply for the SD card */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_dcdc4>;
+	vcc-pe-supply = <&reg_dcdc4>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_dcdc4>;
+	vcc-pj-supply = <&reg_dcdc4>;
+	vcc-pk-supply = <&reg_bldo3>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@34 {
+		compatible = "x-powers,axp717";
+		reg = <0x34>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies the "little" cluster (1.0(?) GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1360000>;
+				regulator-max-microvolt = <1360000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd-dcdc4";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				/* not connected */
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-aldo3";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi-lvds";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dram-1v8";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc-bldo3";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-codec-sd";
+			};
+
+			reg_cldo2: cldo2 {
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-codec-eth-sd";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-eth-phy";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				/* not connected */
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-name = "vdd-dcdc3";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/* USB0 is a USB-A receptacle, always powered, so force host mode. */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
new file mode 100644
index 000000000000..1b054fa8ef74
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2024 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Avaota A1";
+	compatible = "yuzukihd,avaota-a1", "allwinner,sun55i-t527";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>; /* pmic_temp */
+	};
+
+	reg_vcc12v: vcc12v {
+		/* DC input jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the 12V->5V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc12v>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&pio 8 12 GPIO_ACTIVE_HIGH>;	/* PI12 */
+		enable-active-high;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dcdc4>;
+
+	allwinner,tx-delay-ps = <100>;
+	allwinner,rx-delay-ps = <300>;
+
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_dcdc4>;
+	vcc-pe-supply = <&reg_dcdc4>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_dcdc4>;
+	vcc-pj-supply = <&reg_dcdc4>;
+	vcc-pk-supply = <&reg_bldo3>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@35 {
+		compatible = "x-powers,axp717";
+		reg = <0x35>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* no battery; output used for dcdc4 instead */
+			status = "disabled";
+		};
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1160000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd-io";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				/* not connected */
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-pm";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi-lvds";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dram-1v8";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-cvp-pk-vid1v8";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pc";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-spi-ana";
+			};
+
+			reg_cldo4: cldo4 {
+				/* not connected */
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+			/* 12V-5V buck converter can supply up to 5A */
+			input-current-limit-microamp = <3250000>;
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				/* not connected */
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* Some RISC-V management core related voltage */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&rtc {
+	clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>,
+		 <&r_ccu CLK_R_AHB>, <&ext_osc32k>;
+	clock-names = "bus", "hosc", "ahb", "ext-osc32k";
+	assigned-clocks = <&rtc CLK_OSC32K>;
+	assigned-clock-rates = <32768>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	 /*
+	  * The CC pins of the USB-C port have two pull-down resistors
+	  * connected to GND, which fixes this port to a peripheral role.
+	  * There is a regulator, controlled by a GPIO, to provide VBUS power
+	  * to the port, and a VBUSDET GPIO, to detect externally provided
+	  * power, but without the CC pins there is no real way to do a
+	  * runtime role detection.
+	  */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb_vbus>;
+	usb0_vbus_det-gpios = <&pio 8 13 GPIO_ACTIVE_HIGH>; /* PI13 */
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
new file mode 100644
index 000000000000..39a4e194712a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright (C) 2025 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "OrangePi 4A";
+	compatible = "xunlong,orangepi-4a", "allwinner,sun55i-t527";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* PWM capable pin, but PWM isn't supported yet. */
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>, /* pmic_temp */
+			      <&axp717_adc 7>; /* bkup_batt_v */
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 1 1 GPIO_ACTIVE_LOW>; /* PM1 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 4 GPIO_ACTIVE_HIGH>;	/* PL4 */
+		enable-active-high;
+	};
+
+	reg_pcie_vcc3v3: regulator-pcie-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-pcie-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>;	/* PL8 */
+		enable-active-high;
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 12 GPIO_ACTIVE_HIGH>;	/* PL12 */
+		enable-active-high;
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board wide 5V supply from USB type-C port */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_dldo1_323>;
+	vqmmc-supply = <&reg_bldo1>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_cldo3>;
+	vcc-pe-supply = <&reg_aldo2>;
+	vcc-pf-supply = <&reg_cldo3>;	/* VCC-IO for 3.3v; VCC-MCSI for 1.8v */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_cldo3>;
+	vcc-pj-supply = <&reg_cldo1>;
+	vcc-pk-supply = <&reg_cldo1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@35 {
+		compatible = "x-powers,axp717";
+		reg = <0x35>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupts-extended = <&nmi_intc 0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* no battery; output used for dcdc4 instead */
+			status = "disabled";
+		};
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1160000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				/* feeds 3.3V pin on GPIO header */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd-io";
+			};
+
+			aldo1 {
+				/* not actually connected */
+				regulator-name = "avdd-csi";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-usb";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pm-lpddr";
+			};
+
+			bldo3 {
+				/* not actually connected */
+				regulator-name = "afvcc-csi";
+			};
+
+			bldo4 {
+				/* not actually connected */
+				regulator-name = "dvdd-csi";
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-cvp-pc-lvds-mcsi-pk-efuse-pcie-edp-1v8";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-csi";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-nand-pd-pi-usb";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-phy1-lcd";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus-usb-0v9";
+			};
+		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+			input-current-limit-microamp = <3000000>;
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1_323: aldo1 {
+				/* less capable and shares load with dldo1 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo1_323: dldo1 {
+				/* more capable and shares load with aldo1 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi2";
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* Some RISC-V management core related voltage */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_bldo2>;
+};
+
+&rtc {
+	clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>,
+		 <&r_ccu CLK_R_AHB>, <&ext_osc32k>;
+	clock-names = "bus", "hosc", "ahb", "ext-osc32k";
+	assigned-clocks = <&rtc CLK_OSC32K>;
+	assigned-clock-rates = <32768>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_aldo1_323>;
+		vddio-supply = <&reg_bldo1>;
+		device-wakeup-gpios = <&r_pio 1 3 GPIO_ACTIVE_HIGH>; /* PM3 */
+		host-wakeup-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		shutdown-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+	};
+};
+
+&usb_otg {
+	/*
+	 * The OTG controller is connected to one of the type-A ports.
+	 * There is a regulator, controlled by a GPIO, to provide VBUS power
+	 * to the port, and a VBUSDET GPIO, to detect externally provided
+	 * power. But without ID or CC pins there is no real way to do a
+	 * runtime role detection.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_otg_vbus>;
+	usb0_vbus_det-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+	usb1_vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 0def0b0daaf7..effd242f6bf7 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -130,16 +130,19 @@
 		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <150000000>;
 		};
 
 		cb_intosc_ls_clk: cb-intosc-ls-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <300000000>;
 		};
 
 		f2s_free_clk: f2s-free-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			status = "disabled";
 		};
 
 		osc1: osc1 {
@@ -395,7 +398,7 @@
 
 		rst: rstmgr@ffd11000 {
 			#reset-cells = <1>;
-			compatible = "altr,stratix10-rst-mgr";
+			compatible = "altr,stratix10-rst-mgr", "altr,rst-mgr";
 			reg = <0xffd11000 0x1000>;
 		};
 
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
index 0d837d3e65a5..ad52e8a0b9ba 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
@@ -63,13 +63,11 @@
 	status = "okay";
 	phy-mode = "rgmii";
 	phy-addr = <0xffffffff>;
-	snps,max-mtu = <0x0>;
 };
 
 &gmac1 {
 	status = "okay";
 	phy-mode = "rgmii";
-	phy-addr = <0xffffffff>;
 };
 
 &gmac2 {
@@ -104,12 +102,7 @@
 	status = "okay";
 };
 
-&rst {
-	altr,modrst-offset = <0x20>;
-};
-
 &sysmgr {
 	reg = <0xffd12000 0x1000>;
 	interrupts = <0x0 0x10 0x4>;
-	cpu1-start-addr = <0xffd06230>;
 };
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index da9de4986660..f49209fddbbb 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -123,6 +123,7 @@
 			      <0x0 0xf0120000 0x0 0x2000>;	/* GICH */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 		};
 
@@ -151,7 +152,7 @@
 			al,msi-num-spis = <160>;
 		};
 
-		io-fabric@fc000000 {
+		io-bus@fc000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
index 8b6156b5af65..bd35e0e9d0ab 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -320,6 +320,7 @@
 
 		gic: interrupt-controller@f0800000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x0 0xf0800000 0 0x10000>,	/* GICD */
@@ -361,7 +362,7 @@
 			interrupt-parent = <&gic>;
 		};
 
-		io-fabric@fc000000 {
+		io-bus@fc000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
index 1a65f1ec183d..8862adae44e9 100644
--- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -27,7 +27,6 @@
 
 &ccp0 {
 	status = "okay";
-	amd,zlib-support = <1>;
 };
 
 /**
@@ -59,7 +58,7 @@
 
 &spi1 {
 	status = "okay";
-	sdcard0: sdcard@0 {
+	sdcard0: mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
index 52f8d36295a8..b34dd8d5d1b1 100644
--- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -8,33 +8,10 @@
 
 /dts-v1/;
 
-/include/ "amd-seattle-soc.dtsi"
-/include/ "amd-seattle-cpus.dtsi"
+/include/ "amd-overdrive-rev-b0.dts"
 
 / {
 	model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
-	compatible = "amd,seattle-overdrive", "amd,seattle";
-
-	chosen {
-		stdout-path = &serial0;
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-};
-
-&ccp0 {
-	status = "okay";
-	amd,zlib-support = <1>;
-};
-
-/**
- * NOTE: In Rev.B, gpio0 is reserved.
- */
-&gpio1 {
-	status = "okay";
 };
 
 &gpio2 {
@@ -45,48 +22,11 @@
 	status = "okay";
 };
 
-&gpio4 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
 &sata1 {
 	status = "okay";
 };
 
-&spi0 {
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-	sdcard0: sdcard@0 {
-		compatible = "mmc-spi-slot";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		voltage-ranges = <3200 3400>;
-		pl022,interface = <0>;
-		pl022,com-mode = <0x0>;
-		pl022,rx-level-trig = <0>;
-		pl022,tx-level-trig = <0>;
-	};
-};
-
 &ipmi_kcs {
 	status = "okay";
 };
 
-&smb0 {
-	/include/ "amd-seattle-xgbe-b.dtsi"
-};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
index 2dd2c28171ee..73f687773ce6 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
@@ -5,51 +5,39 @@
  * Copyright (C) 2014 Advanced Micro Devices, Inc.
  */
 
-	adl3clk_100mhz: clk100mhz_0 {
+	adl3clk_100mhz: uartspiclk_100mhz: clock-100000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "adl3clk_100mhz";
 	};
 
-	ccpclk_375mhz: clk375mhz {
+	ccpclk_375mhz: clock-375000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <375000000>;
 		clock-output-names = "ccpclk_375mhz";
 	};
 
-	sataclk_333mhz: clk333mhz {
+	sataclk_333mhz: clock-333000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <333000000>;
 		clock-output-names = "sataclk_333mhz";
 	};
 
-	pcieclk_500mhz: clk500mhz_0 {
+	dmaclk_500mhz: pcieclk_500mhz: clock-500000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <500000000>;
 		clock-output-names = "pcieclk_500mhz";
 	};
 
-	dmaclk_500mhz: clk500mhz_1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <500000000>;
-		clock-output-names = "dmaclk_500mhz";
-	};
-
-	miscclk_250mhz: clk250mhz_4 {
+	xgmacclk0_dma_250mhz: xgmacclk0_ptp_250mhz: xgmacclk1_dma_250mhz: xgmacclk1_ptp_250mhz:
+	miscclk_250mhz: clock-250000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <250000000>;
 		clock-output-names = "miscclk_250mhz";
 	};
 
-	uartspiclk_100mhz: clk100mhz_1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-		clock-output-names = "uartspiclk_100mhz";
-	};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 690020589d41..a611f8288b3e 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -11,6 +11,8 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	/include/ "amd-seattle-clks.dtsi"
+
 	gic0: interrupt-controller@e1101000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		interrupt-controller;
@@ -38,7 +40,7 @@
 			     <1 10 0xff04>;
 	};
 
-	smb0: smb {
+	smb0: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -51,8 +53,6 @@
 		 */
 		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
-		/include/ "amd-seattle-clks.dtsi"
-
 		sata0: sata@e0300000 {
 			compatible = "snps,dwc-ahci";
 			reg = <0 0xe0300000 0 0xf0000>;
@@ -121,20 +121,18 @@
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1020000 0 0x1000>;
-			spi-controller;
 			interrupts = <0 330 4>;
-			clocks = <&uartspiclk_100mhz>;
-			clock-names = "apb_pclk";
+			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		spi1: spi@e1030000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1030000 0 0x1000>;
-			spi-controller;
 			interrupts = <0 329 4>;
-			clocks = <&uartspiclk_100mhz>;
-			clock-names = "apb_pclk";
+			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
+			clock-names = "sspclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
index 9259e547e2e8..18b0c2dd1b2d 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -5,35 +5,7 @@
  * Copyright (C) 2015 Advanced Micro Devices, Inc.
  */
 
-	xgmacclk0_dma_250mhz: clk250mhz_0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk0_dma_250mhz";
-	};
-
-	xgmacclk0_ptp_250mhz: clk250mhz_1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk0_ptp_250mhz";
-	};
-
-	xgmacclk1_dma_250mhz: clk250mhz_2 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk1_dma_250mhz";
-	};
-
-	xgmacclk1_ptp_250mhz: clk250mhz_3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk1_ptp_250mhz";
-	};
-
-	xgmac0: xgmac@e0700000 {
+	xgmac0: ethernet@e0700000 {
 		compatible = "amd,xgbe-seattle-v1a";
 		reg = <0 0xe0700000 0 0x80000>,
 		      <0 0xe0780000 0 0x80000>,
@@ -59,7 +31,7 @@
 		dma-coherent;
 	};
 
-	xgmac1: xgmac@e0900000 {
+	xgmac1: ethernet@e0900000 {
 		compatible = "amd,xgbe-seattle-v1a";
 		reg = <0 0xe0900000 0 0x80000>,
 		      <0 0xe0980000 0 0x80000>,
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 29417f04f886..619dce79b020 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -2,6 +2,10 @@
 dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s6-s905x5-bl209.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s7-s805x3-bp201.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s7d-s905x5m-bm202.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
@@ -48,6 +52,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-libretech-ac.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805y-xiaomi-aquaman.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
@@ -75,6 +80,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-ugoos-am3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
index b6106ad4a072..54d7a2d56ef6 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
@@ -52,6 +52,12 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			watchdog@2100 {
+				compatible = "amlogic,a4-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			uart_b: serial@7a000 {
 				compatible = "amlogic,a4-uart",
 					     "amlogic,meson-s4-uart";
@@ -61,6 +67,14 @@
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
+
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,a4-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h b/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h
new file mode 100644
index 000000000000..f6a4c90bab3c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_A4_RESET_H
+#define __DTS_AMLOGIC_A4_RESET_H
+
+/* RESET0 */
+/*						0-3 */
+#define RESET_USB				4
+/*						5-6*/
+#define RESET_U2PHY22				7
+#define RESET_USBPHY20				8
+#define RESET_U2PHY21				9
+#define RESET_USB2DRD				10
+#define RESET_U2H				11
+#define RESET_LED_CTRL				12
+/*						13-31 */
+
+/* RESET1 */
+#define RESET_AUDIO				32
+#define RESET_AUDIO_VAD				33
+/*						34*/
+#define RESET_DDR_APB				35
+#define RESET_DDR				36
+#define RESET_VOUT_VENC				37
+#define RESET_VOUT				38
+/*						39-47 */
+#define RESET_ETHERNET				48
+/*						49-63 */
+
+/* RESET2 */
+#define RESET_DEVICE_MMC_ARB			64
+#define RESET_IRCTRL				65
+/*						66*/
+#define RESET_TS_PLL				67
+/*						68-72*/
+#define RESET_SPICC_0				73
+#define RESET_SPICC_1				74
+/*						75-79*/
+#define RESET_MSR_CLK				80
+/*						81*/
+#define RESET_SAR_ADC				82
+/*						83-87*/
+#define RESET_ACODEC				88
+/*						89-90*/
+#define RESET_WATCHDOG				91
+/*						92-95*/
+
+/* RESET3 */
+/*						96-127 */
+
+/* RESET4 */
+/*						128-131 */
+#define RESET_PWM_AB				132
+#define RESET_PWM_CD				133
+#define RESET_PWM_EF				134
+#define RESET_PWM_GH				135
+/*						136-137*/
+#define RESET_UART_A				138
+#define RESET_UART_B				139
+/*						140*/
+#define RESET_UART_D				141
+#define RESET_UART_E				142
+/*						143-144*/
+#define RESET_I2C_M_A				145
+#define RESET_I2C_M_B				146
+#define RESET_I2C_M_C				147
+#define RESET_I2C_M_D				148
+/*						149-151*/
+#define RESET_SDEMMC_A				152
+/*						153*/
+#define RESET_SDEMMC_C				154
+/*						155-159*/
+
+/* RESET5 */
+/*						160-175*/
+#define RESET_BRG_AO_NIC_SYS			176
+/*						177*/
+#define RESET_BRG_AO_NIC_MAIN			178
+#define RESET_BRG_AO_NIC_AUDIO			179
+/*						180-183*/
+#define RESET_BRG_AO_NIC_ALL			184
+/*						185*/
+#define RESET_BRG_NIC_SDIO			186
+#define RESET_BRG_NIC_EMMC			187
+#define RESET_BRG_NIC_DSU			188
+#define RESET_BRG_NIC_CLK81			189
+#define RESET_BRG_NIC_MAIN			190
+#define RESET_BRG_NIC_ALL			191
+
+#endif
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
index de10e7aebf21..fce45933fa28 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -4,7 +4,9 @@
  */
 
 #include "amlogic-a4-common.dtsi"
+#include "amlogic-a4-reset.h"
 #include <dt-bindings/power/amlogic,a4-pwrc.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
 / {
 	cpus {
 		#address-cells = <2>;
@@ -15,6 +17,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -22,6 +31,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -29,6 +45,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -36,6 +59,22 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -48,3 +87,155 @@
 		};
 	};
 };
+
+&apb {
+	reset: reset-controller@2000 {
+		compatible = "amlogic,a4-reset",
+			     "amlogic,meson-s4-reset";
+		reg = <0x0 0x2000 0x0 0x98>;
+		#reset-cells = <1>;
+	};
+
+	periphs_pinctrl: pinctrl@4000 {
+		compatible = "amlogic,pinctrl-a4";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x4000 0x0 0x280>;
+
+		gpiox: gpio@100 {
+			reg = <0 0x100 0 0x40>, <0 0xc 0 0xc>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 18>;
+		};
+
+		gpiot: gpio@140 {
+			reg = <0 0x140 0 0x40>, <0 0x2c 0 0xc>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 23>;
+		};
+
+		gpiod: gpio@180 {
+			reg = <0 0x180 0 0x40>, <0 0x40 0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>;
+		};
+
+		gpioe: gpio@1c0 {
+			reg = <0 0x1c0 0 0x40>, <0 0x48 0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+		};
+
+		gpiob: gpio@240 {
+			reg = <0 0x240 0 0x40>, <0 0 0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+		};
+
+		func-uart-a {
+			uart_a_default: group-uart-a-pins1 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_X, 11, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 12, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 13, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 14, 1)>;
+			};
+
+			group-uart-a-pins2 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_D, 2, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_D, 3, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-b {
+			uart_b_default: group-uart-b-pins {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_E, 0, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_E, 1, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-d {
+			uart_d_default: group-uart-d-pins1 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 18, 4)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 19, 4)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+
+			group-uart-d-pins2 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 7, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 8, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 9, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 10, 2)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-e {
+			uart_e_default: group-uart-e-pins {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 14, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 15, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 16, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 17, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+	};
+
+	gpio_intc: interrupt-controller@4080 {
+		compatible = "amlogic,a4-gpio-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x4080 0x0 0x20>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts =
+			<10 11 12 13 14 15 16 17 18 19 20 21>;
+	};
+
+	ao_pinctrl: pinctrl@8e700 {
+		compatible = "amlogic,pinctrl-a4";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x8e700 0x0 0x80>;
+
+		gpioao: gpio@4 {
+			reg = <0 0x4 0 0x16>, <0 0 0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 7>;
+		};
+
+		test_n: gpio@44 {
+			reg = <0 0x44 0 0x20>;
+			reg-names = "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+		};
+	};
+
+	gpio_ao_intc: interrupt-controller@8e72c {
+		compatible = "amlogic,a4-gpio-ao-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x8e72c 0x0 0x0c>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts = <140 141>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h b/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h
new file mode 100644
index 000000000000..cdf0f5159620
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_A5_RESET_H
+#define __DTS_AMLOGIC_A5_RESET_H
+
+/* RESET0 */
+/*						0-3 */
+#define RESET_USB				4
+/*						5-7 */
+#define RESET_USBPHY20				8
+/*						9 */
+#define RESET_USB2DRD				10
+/*						11-31 */
+
+/* RESET1 */
+#define RESET_AUDIO				32
+#define RESET_AUDIO_VAD				33
+/*                                              34 */
+#define RESET_DDR_APB				35
+#define RESET_DDR				36
+/*						37-40 */
+#define RESET_DSPA_DEBUG			41
+/*                                              42 */
+#define RESET_DSPA				43
+/*						44-46 */
+#define RESET_NNA				47
+#define RESET_ETHERNET				48
+/*						49-63 */
+
+/* RESET2 */
+#define RESET_ABUS_ARB				64
+#define RESET_IRCTRL				65
+/*						66 */
+#define RESET_TS_PLL				67
+/*						68-72 */
+#define RESET_SPICC_0				73
+#define RESET_SPICC_1				74
+#define RESET_RSA				75
+
+/*						76-79 */
+#define RESET_MSR_CLK				80
+#define RESET_SPIFC				81
+#define RESET_SAR_ADC				82
+/*						83-90 */
+#define RESET_WATCHDOG				91
+/*						92-95 */
+
+/* RESET3 */
+/*						96-127 */
+
+/* RESET4 */
+#define RESET_RTC				128
+/*						129-131 */
+#define RESET_PWM_AB				132
+#define RESET_PWM_CD				133
+#define RESET_PWM_EF				134
+#define RESET_PWM_GH				135
+/*						104-105 */
+#define RESET_UART_A				138
+#define RESET_UART_B				139
+#define RESET_UART_C				140
+#define RESET_UART_D				141
+#define RESET_UART_E				142
+/*						143*/
+#define RESET_I2C_S_A				144
+#define RESET_I2C_M_A				145
+#define RESET_I2C_M_B				146
+#define RESET_I2C_M_C				147
+#define RESET_I2C_M_D				148
+/*						149-151 */
+#define RESET_SDEMMC_A				152
+/*						153 */
+#define RESET_SDEMMC_C				154
+/*						155-159*/
+
+/* RESET5 */
+/*						160-175 */
+#define RESET_BRG_AO_NIC_SYS			176
+#define RESET_BRG_AO_NIC_DSPA			177
+#define RESET_BRG_AO_NIC_MAIN			178
+#define RESET_BRG_AO_NIC_AUDIO			179
+/*						180-183 */
+#define RESET_BRG_AO_NIC_ALL			184
+#define RESET_BRG_NIC_NNA			185
+#define RESET_BRG_NIC_SDIO			186
+#define RESET_BRG_NIC_EMMC			187
+#define RESET_BRG_NIC_DSU			188
+#define RESET_BRG_NIC_SYSCLK			189
+#define RESET_BRG_NIC_MAIN			190
+#define RESET_BRG_NIC_ALL			191
+
+#endif
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
index 43f68a7da2f7..b1da8cbaa25a 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
@@ -4,6 +4,8 @@
  */
 
 #include "amlogic-a4-common.dtsi"
+#include "amlogic-a5-reset.h"
+#include <dt-bindings/power/amlogic,a5-pwrc.h>
 / {
 	cpus {
 		#address-cells = <2>;
@@ -37,4 +39,32 @@
 			enable-method = "psci";
 		};
 	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,a5-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+};
+
+&apb {
+	reset: reset-controller@2000 {
+		compatible = "amlogic,a5-reset",
+			     "amlogic,meson-s4-reset";
+		reg = <0x0 0x2000 0x0 0x98>;
+		#reset-cells = <1>;
+	};
+
+	gpio_intc: interrupt-controller@4080 {
+		compatible = "amlogic,a5-gpio-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x4080 0x0 0x20>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts =
+			<10 11 12 13 14 15 16 17 18 19 20 21>;
+	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
index edce8850b338..a6736ad2a648 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
@@ -16,14 +16,245 @@
 
 	aliases {
 		serial0 = &uart_b;
+		spi0 = &spifc;
 	};
 
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x10000000>;
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 9 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@7f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x07f00000 0x0 0x900000>;
+			no-map;
+		};
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddq: regulator-vddq {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ddr4_2v5: regulator-ddr4-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR4_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1V8_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_b: regulator-vddio-3v3-b {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sdcard: regulator-sdcard {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCARD_POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &uart_b {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&spifc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&spifc_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <83000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		status = "disabled";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot";
+				reg = <0 0x200000>;
+			};
+
+			partition@200000 {
+				label = "env";
+				reg = <0x200000 0x400000>;
+			};
+
+			partition@600000 {
+				label = "system";
+				reg = <0x600000 0xa00000>;
+			};
+
+			partition@1000000 {
+				label = "rootfs";
+				reg = <0x1000000 0x3000000>;
+			};
+
+			partition@4000000 {
+				label = "data";
+				reg = <0x4000000 0x8000000>;
+			};
+		};
+	};
+};
+
+&sd {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default","clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdcard>;
+	vqmmc-supply = <&sdcard>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
new file mode 100644
index 000000000000..45f8631f9feb
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-c3.dtsi"
+
+/ {
+	model = "Amlogic C308l aw419 Development Board";
+	compatible = "amlogic,aw419", "amlogic,c3";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+		spi0 = &spifc;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 9 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@7f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x07f00000 0x0 0x900000>;
+			no-map;
+		};
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddq: regulator-vddq {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ddr4_2v5: regulator-ddr4-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR4_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1V8_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_b: regulator-vddio-3v3-b {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sdcard: regulator-sdcard {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCARD_POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&spifc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&spifc_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <83000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		status = "disabled";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot";
+				reg = <0 0x200000>;
+			};
+
+			partition@200000 {
+				label = "env";
+				reg = <0x200000 0x400000>;
+			};
+
+			partition@600000 {
+				label = "system";
+				reg = <0x600000 0xa00000>;
+			};
+
+			partition@1000000 {
+				label = "rootfs";
+				reg = <0x1000000 0x3000000>;
+			};
+
+			partition@4000000 {
+				label = "data";
+				reg = <0x4000000 0x8000000>;
+			};
+		};
+	};
+};
+
+&sd {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default","clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdcard>;
+	vqmmc-supply = <&sdcard>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index f8fb060c49ae..07aaaf71ea9a 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -7,6 +7,11 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/reset/amlogic,c3-reset.h>
+#include <dt-bindings/clock/amlogic,c3-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,c3-scmi-clkc.h>
+#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+#include <dt-bindings/power/amlogic,c3-pwrc.h>
+#include <dt-bindings/gpio/amlogic-c3-gpio.h>
 
 / {
 	cpus {
@@ -18,6 +23,13 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -25,6 +37,22 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x7d000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -48,6 +76,13 @@
 		#clock-cells = <0>;
 	};
 
+	xtal_32k: xtal-clk-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32k";
+		#clock-cells = <0>;
+	};
+
 	sm: secure-monitor {
 		compatible = "amlogic,meson-gxbb-sm";
 
@@ -57,6 +92,34 @@
 		};
 	};
 
+	sram@7f50e00 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x07f50e00 0x0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x07f50e00 0x100>;
+
+		scmi_shmem: sram@0 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x100>;
+		};
+	};
+
+	firmware {
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x820000C1>;
+			shmem = <&scmi_shmem>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -82,6 +145,44 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			clkc_periphs: clock-controller@0 {
+				compatible = "amlogic,c3-peripherals-clkc";
+				reg = <0x0 0x0 0x0 0x49c>;
+				#clock-cells = <1>;
+				clocks = <&xtal>,
+					 <&scmi_clk CLKID_OSC>,
+					 <&scmi_clk CLKID_FIXED_PLL_OSC>,
+					 <&clkc_pll CLKID_FCLK_DIV2>,
+					 <&clkc_pll CLKID_FCLK_DIV2P5>,
+					 <&clkc_pll CLKID_FCLK_DIV3>,
+					 <&clkc_pll CLKID_FCLK_DIV4>,
+					 <&clkc_pll CLKID_FCLK_DIV5>,
+					 <&clkc_pll CLKID_FCLK_DIV7>,
+					 <&clkc_pll CLKID_GP0_PLL>,
+					 <&scmi_clk CLKID_GP1_PLL_OSC>,
+					 <&clkc_pll CLKID_HIFI_PLL>,
+					 <&scmi_clk CLKID_SYS_CLK>,
+					 <&scmi_clk CLKID_AXI_CLK>,
+					 <&scmi_clk CLKID_SYS_PLL_DIV16>,
+					 <&scmi_clk CLKID_CPU_CLK_DIV16>;
+				clock-names = "xtal_24m",
+					      "oscin",
+					      "fix",
+					      "fdiv2",
+					      "fdiv2p5",
+					      "fdiv3",
+					      "fdiv4",
+					      "fdiv5",
+					      "fdiv7",
+					      "gp0",
+					      "gp1",
+					      "hifi",
+					      "sysclk",
+					      "axiclk",
+					      "sysplldiv16",
+					      "cpudiv16";
+			};
+
 			reset: reset-controller@2000 {
 				compatible = "amlogic,c3-reset";
 				reg = <0x0 0x2000 0x0 0x98>;
@@ -98,16 +199,541 @@
 				compatible = "amlogic,c3-periphs-pinctrl";
 				#address-cells = <2>;
 				#size-cells = <2>;
-				ranges;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x02de>;
 
-				gpio: bank@4000 {
-					reg = <0x0 0x4000 0x0 0x004c>,
-					      <0x0 0x4100 0x0 0x01de>;
+				gpio: bank@0 {
+					reg = <0x0 0x0 0x0 0x004c>,
+					      <0x0 0x100 0x0 0x01de>;
 					reg-names = "mux", "gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
 					gpio-ranges = <&periphs_pinctrl 0 0 55>;
 				};
+
+				i2c0_pins1: i2c0-pins1 {
+					mux {
+						groups = "i2c0_sda_e",
+							 "i2c0_scl_e";
+						function = "i2c0";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c0_pins2: i2c0-pins2 {
+					mux {
+						groups = "i2c0_sda_d",
+							 "i2c0_scl_d";
+						function = "i2c0";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins1: i2c1-pins1 {
+					mux {
+						groups = "i2c1_sda_x",
+							 "i2c1_scl_x";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins2: i2c1-pins2 {
+					mux {
+						groups = "i2c1_sda_d",
+							 "i2c1_scl_d";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins3: i2c1-pins3 {
+					mux {
+						groups = "i2c1_sda_a",
+							 "i2c1_scl_a";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins4: i2c1-pins4 {
+					mux {
+						groups = "i2c1_sda_b",
+							 "i2c1_scl_b";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_pins1: i2c2-pins1 {
+					mux {
+						groups = "i2c2_sda",
+							 "i2c2_scl";
+						function = "i2c2";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_pins1: i2c3-pins1 {
+					mux {
+						groups = "i2c3_sda_c",
+							 "i2c3_scl_c";
+						function = "i2c3";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_pins2: i2c3-pins2 {
+					mux {
+						groups = "i2c3_sda_x",
+							 "i2c3_scl_x";
+						function = "i2c3";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_pins3: i2c3-pins3 {
+					mux {
+						groups = "i2c3_sda_d",
+							 "i2c3_scl_d";
+						function = "i2c3";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				nand_pins: nand-pins {
+					mux {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "nand_ce0",
+							 "nand_ale",
+							 "nand_cle",
+							 "nand_wen_clk",
+							 "nand_ren_wr";
+						function = "nand";
+						input-enable;
+					};
+				};
+
+				sdcard_pins: sdcard-pins {
+					mux {
+						groups = "sdcard_d0",
+							 "sdcard_d1",
+							 "sdcard_d2",
+							 "sdcard_d3",
+							 "sdcard_clk",
+							 "sdcard_cmd";
+						function = "sdcard";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdcard_clk_gate_pins: sdcard-clk-cmd-pins {
+					mux {
+						groups = "GPIOC_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_m_clk_gate_pins: sdio-m-clk-cmd-pins {
+					mux {
+						groups = "sdio_clk";
+						function = "sdio";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_m_pins: sdio-m-all-pins {
+					mux {
+						groups = "sdio_d0",
+							 "sdio_d1",
+							 "sdio_d2",
+							 "sdio_d3",
+							 "sdio_clk",
+							 "sdio_cmd";
+						function = "sdio";
+						input-enable;
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				spicc0_pins1: spicc0-pins1 {
+					mux {
+						groups = "spi_a_mosi_b",
+							 "spi_a_miso_b",
+							 "spi_a_clk_b";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins2: spicc0-pins2 {
+					mux {
+						groups = "spi_a_mosi_c",
+							 "spi_a_miso_c",
+							 "spi_a_clk_c";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins3: spicc0-pins3 {
+					mux {
+						groups = "spi_a_mosi_x",
+							 "spi_a_miso_x",
+							 "spi_a_clk_x";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc1_pins1: spicc1-pins1 {
+					mux {
+						groups = "spi_b_mosi_d",
+							 "spi_b_miso_d",
+							 "spi_b_clk_d";
+						function = "spi_b";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc1_pins2: spicc1-pins2 {
+					mux {
+						groups = "spi_b_mosi_x",
+							 "spi_b_miso_x",
+							 "spi_b_clk_x";
+						function = "spi_b";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spifc_pins: spifc-pins {
+					mux {
+						groups = "spif_mo",
+							 "spif_mi",
+							 "spif_clk",
+							 "spif_cs",
+							 "spif_hold",
+							 "spif_wp",
+							 "spif_clk_loop";
+						function = "spif";
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				pwm_a_pins1: pwm-a-pins1 {
+					mux {
+						groups = "pwm_a";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_b_pins1: pwm-b-pins1 {
+					mux {
+						groups = "pwm_b";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_c_pins1: pwm-c-pins1 {
+					mux {
+						groups = "pwm_c";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_d_pins1: pwm-d-pins1 {
+					mux {
+						groups = "pwm_d";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins1: pwm-e-pins1 {
+					mux {
+						groups = "pwm_e";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_pins1: pwm-f-pins1 {
+					mux {
+						groups = "pwm_f";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_g_pins1: pwm-g-pins1 {
+					mux {
+						groups = "pwm_g_b";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins2: pwm-g-pins2 {
+					mux {
+						groups = "pwm_g_c";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins3: pwm-g-pins3 {
+					mux {
+						groups = "pwm_g_d";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins4: pwm-g-pins4 {
+					mux {
+						groups = "pwm_g_x0";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins5: pwm-g-pins5 {
+					mux {
+						groups = "pwm_g_x8";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_h_pins1: pwm-h-pins1 {
+					mux {
+						groups = "pwm_h_b";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_h_pins2: pwm-h-pins2 {
+					mux {
+						groups = "pwm_h_c";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_h_pins3: pwm-h-pins3 {
+					mux {
+						groups = "pwm_h_d";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_h_pins4: pwm-h-pins4 {
+					mux {
+						groups = "pwm_h_x1";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_h_pins5: pwm-h-pins5 {
+					mux {
+						groups = "pwm_h_x9";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_i_pins1: pwm-i-pins1 {
+					mux {
+						groups = "pwm_i_b";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins2: pwm-i-pins2 {
+					mux {
+						groups = "pwm_i_c";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins3: pwm-i-pins3 {
+					mux {
+						groups = "pwm_i_d";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins4: pwm-i-pins4 {
+					mux {
+						groups = "pwm_i_x2";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins5: pwm-i-pins5 {
+					mux {
+						groups = "pwm_i_x10";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_j_pins1: pwm-j-pins1 {
+					mux {
+						groups = "pwm_j_c";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_j_pins2: pwm-j-pins2 {
+					mux {
+						groups = "pwm_j_d";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_j_pins3: pwm-j-pins3 {
+					mux {
+						groups = "pwm_j_b";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_j_pins4: pwm-j-pins4 {
+					mux {
+						groups = "pwm_j_x3";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_j_pins5: pwm-j-pins5 {
+					mux {
+						groups = "pwm_j_x12";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_k_pins1: pwm-k-pins1 {
+					mux {
+						groups = "pwm_k_c";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_k_pins2: pwm-k-pins2 {
+					mux {
+						groups = "pwm_k_d";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_k_pins3: pwm-k-pins3 {
+					mux {
+						groups = "pwm_k_b";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_k_pins4: pwm-k-pins4 {
+					mux {
+						groups = "pwm_k_x4";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_k_pins5: pwm-k-pins5 {
+					mux {
+						groups = "pwm_k_x13";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_l_pins1: pwm-l-pins1 {
+					mux {
+						groups = "pwm_l_c";
+						function = "pwm_l";
+					};
+				};
+
+				pwm_l_pins2: pwm-l-pins2 {
+					mux {
+						groups = "pwm_l_x";
+						function = "pwm_l";
+					};
+				};
+
+				pwm_l_pins3: pwm-l-pins3 {
+					mux {
+						groups = "pwm_l_b";
+						function = "pwm_l";
+					};
+				};
+
+				pwm_l_pins4: pwm-l-pins4 {
+					mux {
+						groups = "pwm_l_a";
+						function = "pwm_l";
+					};
+				};
+
+				pwm_m_pins1: pwm-m-pins1 {
+					mux {
+						groups = "pwm_m_c";
+						function = "pwm_m";
+					};
+				};
+
+				pwm_m_pins2: pwm-m-pins2 {
+					mux {
+						groups = "pwm_m_x";
+						function = "pwm_m";
+					};
+				};
+
+				pwm_m_pins3: pwm-m-pins3 {
+					mux {
+						groups = "pwm_m_a";
+						function = "pwm_m";
+					};
+				};
+
+				pwm_m_pins4: pwm-m-pins4 {
+					mux {
+						groups = "pwm_m_b";
+						function = "pwm_m";
+					};
+				};
+
+				pwm_n_pins1: pwm-n-pins1 {
+					mux {
+						groups = "pwm_n_x";
+						function = "pwm_n";
+					};
+				};
+
+				pwm_n_pins2: pwm-n-pins2 {
+					mux {
+						groups = "pwm_n_a";
+						function = "pwm_n";
+					};
+				};
+
+				pwm_n_pins3: pwm-n-pins3 {
+					mux {
+						groups = "pwm_n_b";
+						function = "pwm_n";
+					};
+				};
 			};
 
 			gpio_intc: interrupt-controller@4080 {
@@ -119,16 +745,291 @@
 					<10 11 12 13 14 15 16 17 18 19 20 21>;
 			};
 
+			clkc_pll: clock-controller@8000 {
+				compatible = "amlogic,c3-pll-clkc";
+				reg = <0x0 0x8000 0x0 0x1a4>;
+				#clock-cells = <1>;
+				clocks = <&scmi_clk CLKID_TOP_PLL_OSC>,
+					 <&scmi_clk CLKID_MCLK_PLL_OSC>,
+					 <&scmi_clk CLKID_FIXED_PLL_OSC>;
+				clock-names = "top",
+					      "mclk",
+					      "fix";
+			};
+
+			eth_phy: mdio-multiplexer@28000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x28000 0x0 0xa4>;
+
+				clocks = <&clkc_periphs CLKID_SYS_ETH_PHY>,
+					 <&xtal>,
+					 <&clkc_pll CLKID_FCLK_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ext_mdio: mdio@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet_phy@8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+
+			clk_msr: clock-measure@48000 {
+				compatible = "amlogic,c3-clk-measure";
+				reg = <0x0 0x48000 0x0 0x1c>;
+			};
+
+			spicc0: spi@50000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x50000 0x0 0x44>;
+				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SYS_SPICC_0>,
+					 <&clkc_periphs CLKID_SPICC_A>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc1: spi@52000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x52000 0x0 0x44>;
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SYS_SPICC_1>,
+					 <&clkc_periphs CLKID_SPICC_B>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_mn: pwm@54000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x54000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_M>,
+					 <&clkc_periphs CLKID_PWM_N>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			spifc: spi@56000 {
+				compatible = "amlogic,a1-spifc";
+				reg = <0x0 0x56000 0x0 0x290>;
+				interrupts = <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SPIFC>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@58000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x58000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_A>,
+					 <&clkc_periphs CLKID_PWM_B>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@5a000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5a000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_C>,
+					 <&clkc_periphs CLKID_PWM_D>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@5c000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5c000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_E>,
+					 <&clkc_periphs CLKID_PWM_F>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_gh: pwm@5e000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5e000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_G>,
+					 <&clkc_periphs CLKID_PWM_H>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ij: pwm@60000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x60000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_I>,
+					 <&clkc_periphs CLKID_PWM_J>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_kl: pwm@62000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x62000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_K>,
+					 <&clkc_periphs CLKID_PWM_L>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@66000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x66000 0x0 0x24>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_A>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@68000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x68000 0x0 0x24>;
+				interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_B>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@6a000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6a000 0x0 0x24>;
+				interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_C>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@6c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6c000 0x0 0x24>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_D>;
+				status = "disabled";
+			};
+
 			uart_b: serial@7a000 {
 				compatible = "amlogic,meson-s4-uart",
 					   "amlogic,meson-ao-uart";
 				reg = <0x0 0x7a000 0x0 0x18>;
 				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
-				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clocks = <&xtal>, <&clkc_periphs CLKID_SYS_UART_B>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 			};
 
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,c3-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			sdio: mmc@88000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x88000 0x0 0x800>;
+				interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
+				power-domains = <&pwrc PWRC_C3_SDIOA_ID>;
+				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_A>,
+					  <&clkc_periphs CLKID_SD_EMMC_A>,
+					  <&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core","clkin0", "clkin1";
+				no-mmc;
+				no-sd;
+				resets = <&reset RESET_SD_EMMC_A>;
+				status = "disabled";
+			};
+
+			sd: mmc@8a000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x8a000 0x0 0x800>;
+				interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+				power-domains = <&pwrc PWRC_C3_SDCARD_ID>;
+				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_B>,
+					<&clkc_periphs CLKID_SD_EMMC_B>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "clkin0", "clkin1";
+				no-mmc;
+				no-sdio;
+				resets = <&reset RESET_SD_EMMC_B>;
+				status = "disabled";
+			};
+
+			nand: nand-controller@8d000 {
+				compatible = "amlogic,meson-axg-nfc";
+				reg = <0x0 0x8d000 0x0 0x200>,
+					<0x0 0x8C000 0x0 0x4>;
+				reg-names = "nfc", "emmc";
+				interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_C>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "device";
+				status = "disabled";
+			};
+
+			rtc@9a000 {
+				compatible = "amlogic,c3-rtc",
+					     "amlogic,a5-rtc";
+				reg = <0x0 0x9a000 0x0 0x38>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal_32k>, <&clkc_periphs CLKID_SYS_RTC>;
+				clock-names = "osc", "sys";
+			};
+		};
+
+		ethmac: ethernet@fdc00000 {
+			compatible = "amlogic,meson-g12a-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xfdc00000 0x0 0x10000>,
+			      <0x0 0xfe024000 0x0 0x8>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			power-domains = <&pwrc PWRC_C3_ETH_ID>;
+			clocks = <&clkc_periphs CLKID_SYS_ETH_MAC>,
+				 <&clkc_pll CLKID_FCLK_DIV2>,
+				 <&clkc_pll CLKID_FCLK_50M>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts b/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts
new file mode 100644
index 000000000000..c45b22651798
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s6.dtsi"
+/ {
+	model = "Amlogic S905X5 BL209 Development Board";
+	compatible = "amlogic,bl209", "amlogic,s6";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x000000 0x0 0xe0000000>,
+		      <0x1 0x000000 0x0 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 27 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x1b00000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
new file mode 100644
index 000000000000..5f602f1170c0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@ff200000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xff200000 0 0x10000>,
+			      <0x0 0xff240000 0 0x80000>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s6-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,pinctrl-s6";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+				gpioz: gpio@c0 {
+					reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 16>;
+				};
+
+				gpiox: gpio@100 {
+					reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+				};
+
+				gpioh: gpio@140 {
+					reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 9>;
+				};
+
+				gpiod: gpio@180 {
+					reg = <0 0x180 0 0x20>, <0 0x8 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 7>;
+				};
+
+				gpiof: gpio@1a0 {
+					reg = <0 0x1a0 0 0x20>, <0 0x20 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_F<<8) 5>;
+				};
+
+				gpioe: gpio@1c0 {
+					reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 3>;
+				};
+
+				gpioc: gpio@200 {
+					reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+				};
+
+				gpiob: gpio@240 {
+					reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+				};
+
+				gpioa: gpio@280 {
+					reg = <0 0x280 0 0x20>, <0 0x40 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_A<<8) 16>;
+				};
+
+				test_n: gpio@2c0 {
+					reg = <0 0x2c0 0 0x20>;
+					reg-names = "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges =
+						<&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+				};
+
+				gpiocc: gpio@300 {
+					reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts b/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts
new file mode 100644
index 000000000000..7fd4ac9321a6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s7.dtsi"
+/ {
+	model = "Amlogic S805X3 BP201 Development Board";
+	compatible = "amlogic,bp201", "amlogic,s7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 35 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x2300000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
new file mode 100644
index 000000000000..d262c0b66e4b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>; /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s7-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,pinctrl-s7";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+				gpioz: gpio@c0 {
+					reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>;
+				};
+
+				gpiox: gpio@100 {
+					reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+				};
+
+				gpioh: gpio@140 {
+					reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>;
+				};
+
+				gpiod: gpio@180 {
+					reg = <0 0x180 0 0x20>, <0 0x40 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 12>;
+				};
+
+				gpioe: gpio@1c0 {
+					reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+				};
+
+				gpioc: gpio@200 {
+					reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+				};
+
+				gpiob: gpio@240 {
+					reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+				};
+
+				test_n: gpio@2c0 {
+					reg = <0 0x2c0 0 0x20>;
+					reg-names = "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges =
+						<&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+				};
+
+				gpiocc: gpio@300 {
+					reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts b/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts
new file mode 100644
index 000000000000..2933fcdbc8ef
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s7d.dtsi"
+/ {
+	model = "Amlogic S905X5M BM202 Development Board";
+	compatible = "amlogic,bm202", "amlogic,s7d";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 36 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x2400000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
new file mode 100644
index 000000000000..c4d260d5bb58
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s7d-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,pinctrl-s7d",
+					     "amlogic,pinctrl-s7";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+				gpioz: gpio@c0 {
+					reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>;
+				};
+
+				gpiox: gpio@100 {
+					reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+				};
+
+				gpioh: gpio@140 {
+					reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>;
+				};
+
+				gpiod: gpio@180 {
+					reg = <0 0x180 0 0x20>, <0 0x40 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 5>;
+				};
+
+				gpioe: gpio@1c0 {
+					reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+				};
+
+				gpioc: gpio@200 {
+					reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+				};
+
+				gpiob: gpio@240 {
+					reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+				};
+
+				gpiodv: gpio@280 {
+					reg = <0 0x280 0 0x20>, <0 0x8 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_DV<<8) 7>;
+				};
+
+				test_n: gpio@2c0 {
+					reg = <0 0x2c0 0 0x20>;
+					reg-names = "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges =
+						<&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+				};
+
+				gpiocc: gpio@300 {
+					reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
index c23efc6c7ac0..6510068bcff9 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -53,6 +53,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu101: cpu@101 {
@@ -60,6 +67,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu102: cpu@102 {
@@ -67,6 +81,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu103: cpu@103 {
@@ -74,6 +95,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu0: cpu@0 {
@@ -81,6 +109,13 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 		};
 
 		cpu1: cpu@1 {
@@ -88,6 +123,13 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 		};
 
 		cpu2: cpu@2 {
@@ -95,6 +137,13 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 		};
 
 		cpu3: cpu@3 {
@@ -102,6 +151,31 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
+		};
+
+		l2_cache_l: l2-cache-cluster0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;  /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+
+		l2_cache_b: l2-cache-cluster1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>; /* L2. 1 Mb */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -194,6 +268,14 @@
 				interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
+
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,t7-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
 		};
 
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index e5366d4239b1..27b68ed85c4c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -27,6 +27,12 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -36,6 +42,12 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -44,6 +56,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -233,6 +248,7 @@
 						groups = "uart_a_tx",
 							 "uart_a_rx";
 						function = "uart_a";
+						bias-pull-up;
 					};
 				};
 
@@ -245,6 +261,188 @@
 					};
 				};
 
+				pwm_a_pins1: pwm-a-pins1 {
+					mux {
+						groups = "pwm_a_x6";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins2: pwm-a-pins2 {
+					mux {
+						groups = "pwm_a_x7";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins3: pwm-a-pins3 {
+					mux {
+						groups = "pwm_a_f10";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins4: pwm-a-pins4 {
+					mux {
+						groups = "pwm_a_f6";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins5: pwm-a-pins5 {
+					mux {
+						groups = "pwm_a_a";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_b_pins1: pwm-b-pins1 {
+					mux {
+						groups = "pwm_b_x";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_pins2: pwm-b-pins2 {
+					mux {
+						groups = "pwm_b_f";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_pins3: pwm-b-pins3 {
+					mux {
+						groups = "pwm_b_a";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_c_pins1: pwm-c-pins1 {
+					mux {
+						groups = "pwm_c_x";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins2: pwm-c-pins2 {
+					mux {
+						groups = "pwm_c_f3";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins3: pwm-c-pins3 {
+					mux {
+						groups = "pwm_c_f8";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins4: pwm-c-pins4 {
+					mux {
+						groups = "pwm_c_a";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_d_pins1: pwm-d-pins1 {
+					mux {
+						groups = "pwm_d_x15";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins2: pwm-d-pins2 {
+					mux {
+						groups = "pwm_d_x13";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins3: pwm-d-pins3 {
+					mux {
+						groups = "pwm_d_x10";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins4: pwm-d-pins4 {
+					mux {
+						groups = "pwm_d_f";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins1: pwm-e-pins1 {
+					mux {
+						groups = "pwm_e_p";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins2: pwm-e-pins2 {
+					mux {
+						groups = "pwm_e_x16";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins3: pwm-e-pins3 {
+					mux {
+						groups = "pwm_e_x14";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins4: pwm-e-pins4 {
+					mux {
+						groups = "pwm_e_x2";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins5: pwm-e-pins5 {
+					mux {
+						groups = "pwm_e_f";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins6: pwm-e-pins6 {
+					mux {
+						groups = "pwm_e_a";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_pins1: pwm-f-pins1 {
+					mux {
+						groups = "pwm_f_b";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins2: pwm-f-pins2 {
+					mux {
+						groups = "pwm_f_x";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins3: pwm-f-pins3 {
+					mux {
+						groups = "pwm_f_f4";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins4: pwm-f-pins4 {
+					mux {
+						groups = "pwm_f_f12";
+						function = "pwm_f";
+					};
+				};
+
 				sdio_pins: sdio {
 					mux0 {
 						groups = "sdcard_d0_x",
@@ -340,6 +538,28 @@
 				status = "disabled";
 			};
 
+			pwm_ab: pwm@2400 {
+				compatible = "amlogic,meson-a1-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x2400 0x0 0x24>;
+				#pwm-cells = <3>;
+				clocks = <&clkc_periphs CLKID_PWM_A>,
+					 <&clkc_periphs CLKID_PWM_B>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@2800 {
+				compatible = "amlogic,meson-a1-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x2800 0x0 0x24>;
+				#pwm-cells = <3>;
+				clocks = <&clkc_periphs CLKID_PWM_C>,
+					 <&clkc_periphs CLKID_PWM_D>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+				status = "disabled";
+			};
+
 			saradc: adc@2c00 {
 				compatible = "amlogic,meson-g12a-saradc",
 					"amlogic,meson-saradc";
@@ -409,6 +629,7 @@
 				assigned-clock-rates = <500000>;
 				#thermal-sensor-cells = <0>;
 				amlogic,ao-secure = <&sec_AO>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
 			};
 
 			hwrng: rng@5118 {
@@ -423,6 +644,17 @@
 				amlogic,has-chip-id;
 			};
 
+			pwm_ef: pwm@5400 {
+				compatible = "amlogic,meson-a1-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5400 0x0 0x24>;
+				#pwm-cells = <3>;
+				clocks = <&clkc_periphs CLKID_PWM_E>,
+					 <&clkc_periphs CLKID_PWM_F>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+				status = "disabled";
+			};
+
 			clkc_pll: pll-clock-controller@7c80 {
 				compatible = "amlogic,a1-pll-clkc";
 				reg = <0 0x7c80 0 0x18c>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 7ed526f45175..9611775b81ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -268,6 +268,10 @@
 				"Speaker1 Right", "SPK1 OUT_D",
 				"Linein AINL", "Linein",
 				"Linein AINR", "Linein";
+		clocks = <&clkc CLKID_HIFI_PLL>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_HIFI_PLL>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index e9b22868983d..04fb130ac7c6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -83,6 +83,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			dynamic-power-coefficient = <140>;
@@ -94,6 +100,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			dynamic-power-coefficient = <140>;
@@ -105,6 +117,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			dynamic-power-coefficient = <140>;
@@ -115,6 +133,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -1164,7 +1185,7 @@
 						groups = "uart_tx_a",
 							 "uart_rx_a";
 						function = "uart_a";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1182,7 +1203,7 @@
 						groups = "uart_tx_b_x",
 							 "uart_rx_b_x";
 						function = "uart_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1200,7 +1221,7 @@
 						groups = "uart_tx_b_z",
 							 "uart_rx_b_z";
 						function = "uart_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1218,7 +1239,7 @@
 						groups = "uart_ao_tx_b_z",
 							 "uart_ao_rx_b_z";
 						function = "uart_ao_b_z";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1654,7 +1675,7 @@
 						groups = "uart_ao_tx_a",
 							 "uart_ao_rx_a";
 						function = "uart_ao_a";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1672,7 +1693,7 @@
 						groups = "uart_ao_tx_b",
 							 "uart_ao_rx_b";
 						function = "uart_ao_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1693,8 +1714,12 @@
 			};
 
 			pwm_AO_cd: pwm@2000 {
-				compatible = "amlogic,meson-axg-ao-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x02000  0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV5>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -1728,8 +1753,12 @@
 			};
 
 			pwm_AO_ab: pwm@7000 {
-				compatible = "amlogic,meson-axg-ao-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x07000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV5>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -1806,15 +1835,23 @@
 			};
 
 			pwm_ab: pwm@1b000 {
-				compatible = "amlogic,meson-axg-ee-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1b000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc CLKID_FCLK_DIV5>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_cd: pwm@1a000 {
-				compatible = "amlogic,meson-axg-ee-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1a000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc CLKID_FCLK_DIV5>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index d08c97797010..dcc927a9da80 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1503,7 +1503,7 @@
 							groups = "uart_a_tx",
 								 "uart_a_rx";
 							function = "uart_a";
-							bias-disable;
+							bias-pull-up;
 						};
 					};
 
@@ -1521,7 +1521,7 @@
 							groups = "uart_b_tx",
 								 "uart_b_rx";
 							function = "uart_b";
-							bias-disable;
+							bias-pull-up;
 						};
 					};
 
@@ -1913,12 +1913,12 @@
 					};
 				};
 
-				uart_ao_a_pins: uart-a-ao {
+				uart_ao_a_pins: uart-ao-a {
 					mux {
 						groups = "uart_ao_a_tx",
 							 "uart_ao_a_rx";
 						function = "uart_ao_a";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1936,7 +1936,7 @@
 						groups = "uart_ao_b_tx_2",
 							 "uart_ao_b_rx_3";
 						function = "uart_ao_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1945,7 +1945,7 @@
 						groups = "uart_ao_b_tx_8",
 							 "uart_ao_b_rx_9";
 						function = "uart_ao_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -2060,8 +2060,11 @@
 			};
 
 			pwm_AO_cd: pwm@2000 {
-				compatible = "amlogic,meson-g12a-ao-pwm-cd";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x2000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -2099,8 +2102,13 @@
 			};
 
 			pwm_AO_ab: pwm@7000 {
-				compatible = "amlogic,meson-g12a-ao-pwm-ab";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x7000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV5>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -2301,22 +2309,37 @@
 			};
 
 			pwm_ef: pwm@19000 {
-				compatible = "amlogic,meson-g12a-ee-pwm";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x19000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_cd: pwm@1a000 {
-				compatible = "amlogic,meson-g12a-ee-pwm";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1a000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_ab: pwm@1b000 {
-				compatible = "amlogic,meson-g12a-ee-pwm";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1b000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
index af211d8f3952..d0a3b4b9229c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
@@ -176,6 +176,10 @@
 				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -263,28 +267,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
@@ -342,8 +342,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -351,8 +349,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pdm {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
index 15b9bc280706..4353485c6f26 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
@@ -138,6 +138,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -216,28 +220,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -280,8 +280,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -289,8 +287,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 61cb8135a392..f39fcabc763f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -201,6 +201,10 @@
 				"TODDR_B IN 1", "TDMIN_B OUT",
 				"TODDR_C IN 1", "TDMIN_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -310,28 +314,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -385,8 +385,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -394,8 +392,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pdm {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 0e239939ade6..b5bf8ecc91e6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -238,6 +238,10 @@
 				"Lineout", "10U2 OUTL",
 				"Lineout", "10U2 OUTR";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -403,28 +407,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &clkc_audio {
@@ -498,8 +498,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 05c7a1e3f1b7..5ab460a3e637 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -158,6 +158,10 @@
 				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -259,28 +263,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -324,8 +324,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -359,8 +357,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &uart_A {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 543e70669df5..1321ad95923d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -17,6 +17,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -26,6 +32,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -35,6 +47,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -44,6 +62,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -52,6 +76,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -62,6 +89,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
index 124a80901084..9fd68195be3f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
@@ -39,3 +39,7 @@
 	phy-names = "usb2-phy0", "usb2-phy1";
 };
  */
+
+&npu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
index 65b963d794cd..82546b738977 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
@@ -76,46 +76,42 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>, <&pwm_b_x7_pins>;
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
+};
+
+&npu {
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
index 8e9ad1e51d66..8ecb5bd125c1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -14,6 +14,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <761000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -54,6 +55,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
index 13d478f9c891..2d74456e685d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
@@ -70,6 +70,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
index 003efed529ba..0f48c32bec97 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
@@ -79,6 +79,10 @@
 				"LINPUT1", "Mic Jack",
 				"Mic Jack", "MICB";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 					<&clkc CLKID_MPLL0>,
 					<&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
index 08c33ec7e9f1..39011b645128 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -155,42 +155,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
@@ -257,8 +251,6 @@
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 
 	status = "okay";
 };
@@ -273,8 +265,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
index 6a346cb86a53..1b08303c4282 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -194,6 +194,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -259,42 +263,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
@@ -363,8 +361,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pwm_ef {
@@ -376,8 +372,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
index 3a24c2411552..8e3e3354ed67 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
@@ -38,6 +38,12 @@
 				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
 				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -110,6 +116,10 @@
 	status = "okay";
 };
 
+&clkc_audio {
+	status = "okay";
+};
+
 &frddr_a {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
index bb73e10b5e74..369c5cf889b6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
@@ -48,6 +48,10 @@
 				"TDMOUT_A IN 2", "FRDDR_C OUT 1",
 				"TDM_A Playback", "TDMOUT_A OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
index 6eeedd54ab91..654449afd3a4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
@@ -49,6 +49,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
index 0da386cabe1a..e20311386745 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
@@ -37,6 +37,10 @@
 				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index 16dd409051b4..fc737499f207 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -51,57 +51,47 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
index eed2a23047ca..d5938a4a6da3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
@@ -234,6 +234,10 @@
 				"Internal Speakers", "Speaker Amplifier OUTL",
 				"Internal Speakers", "Speaker Amplifier OUTR";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -277,42 +281,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 /* RK817 only supports 12.5mV steps, round up the values */
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 86eb81112232..3bca8023638d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -95,6 +95,10 @@
 				"Lineout", "U19 OUTL",
 				"Lineout", "U19 OUTR";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
index e26f3e3258e1..1b9097a30251 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
@@ -39,6 +39,10 @@
 				"TODDR_B IN 6", "TDMIN_LB OUT",
 				"TODDR_C IN 6", "TDMIN_LB OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
index 09d959aefb18..3298d59833b6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
@@ -227,42 +227,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu_thermal {
@@ -327,16 +321,12 @@
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
index 8445701100d0..1e5c6f984945 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
@@ -176,6 +176,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -255,42 +259,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu_thermal {
@@ -375,32 +373,24 @@
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_ef {
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_ab {
 	pinctrl-0 = <&pwm_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
index 44c23c984034..19cad93a6889 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -14,6 +14,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -59,6 +60,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <771000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index 6396f190d703..4c1a75b926ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -32,6 +32,10 @@
 				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index 4cb6930ffb19..9b6d780eada7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -213,42 +213,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -304,24 +298,18 @@
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
 &pwm_ef {
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index 86e6ceb31d5e..f04efa828256 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -49,7 +49,13 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <592>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -59,7 +65,13 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <592>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -69,7 +81,13 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -79,7 +97,13 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -89,7 +113,13 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 			#cooling-cells = <2>;
 		};
 
@@ -99,14 +129,32 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 			#cooling-cells = <2>;
 		};
 
-		l2: l2-cache0 {
+		l2_cache_l: l2-cache-cluster0 {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x40000>;  /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+
+		l2_cache_b: l2-cache-cluster1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>; /* L2. 1MB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index efd662a452e8..2da49cfbde77 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -194,6 +194,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"7J4-14 LEFT", "AU2 OUTL",
 				"7J4-11 RIGHT", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -341,24 +345,18 @@
 &pwm_AO_ab {
 	pinctrl-0 = <&pwm_ao_a_3_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_ab {
 	pinctrl-0 = <&pwm_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_ef {
 	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 08d6b69ba469..b4f88ed6273b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -97,7 +97,7 @@
 		clock-names = "ext_clock";
 	};
 
-	cvbs-connector {
+	cvbs_connector: cvbs-connector {
 		compatible = "composite-video-connector";
 
 		port {
@@ -129,6 +129,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -236,8 +240,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 2673f0dbafe7..c1d8e81d95cb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -95,6 +95,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -105,6 +111,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -115,6 +127,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -125,6 +143,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -134,6 +158,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -329,14 +356,14 @@
 			};
 
 			pwm_ab: pwm@8550 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x08550 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_cd: pwm@8650 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x08650 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
@@ -351,7 +378,7 @@
 			};
 
 			pwm_ef: pwm@86c0 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x086c0 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
@@ -498,7 +525,7 @@
 			};
 
 			pwm_AO_ab: pwm@550 {
-				compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x00550 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index f28452b9f00f..073b47ce8c3c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -45,6 +45,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "KII-PRO";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 1fd2e56e6b08..2ecc6ebd5a43 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -135,6 +135,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "NANOPI-K2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -294,8 +298,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index cca129ce2c58..c09da40ff7b0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -142,6 +142,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "NEXBOX-A95X";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -237,8 +241,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index c37cc6b036cd..12e26f99d4f0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -177,6 +177,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "ODROID-C2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -344,10 +348,6 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-ddr50;
 	max-frequency = <100000000>;
 	disable-wp;
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index 7f94716876d3..bfac00e76ba3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -68,6 +68,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "P200";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
index 6f81eed83bec..c10f66031ecd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
@@ -17,6 +17,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "P201";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index 52d57773a77f..6f67364fd63f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -150,8 +150,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
@@ -178,9 +176,8 @@
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 255e93a0b36d..6ff567225fee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -108,6 +108,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "VEGA-S95";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -218,8 +222,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
index af9ea32a2876..ec281a9e9e77 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
@@ -16,6 +16,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "WETEK-HUB";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index 376760d86766..924414861b72 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -48,6 +48,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "WETEK-PLAY2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index deb295227189..bfedfc1472ec 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -185,8 +185,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index ed00e67e6923..f69923da07fe 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -105,7 +105,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -122,7 +122,7 @@
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -520,7 +520,7 @@
 				groups = "uart_tx_a",
 				       "uart_rx_a";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -538,7 +538,7 @@
 				groups = "uart_tx_b",
 				       "uart_rx_b";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -556,7 +556,7 @@
 				groups = "uart_tx_c",
 				       "uart_rx_c";
 				function = "uart_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -739,6 +739,31 @@
 	};
 };
 
+&pwm_ab {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_AO_ab {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+};
+
+&pwm_cd {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_ef {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
 &pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
index 90ef9c17d80b..c6132fb71dfc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
@@ -123,6 +123,10 @@
 				"Speaker", "9J5-2 RIGHT";
 		audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
 				"9J5-2 RIGHT", "ACODEC LORN";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
index 08a4718219b1..ca7c4e8e7cac 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -128,6 +128,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -276,8 +280,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* This is connected to the Bluetooth module: */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts
new file mode 100644
index 000000000000..cac15b89c573
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Ferass El Hafidi <funderscore@postmarketos.org>
+ * Heavily based on meson-gxl-s805x-p241.dtb:
+ *  - Copyright (c) 2018 BayLibre, SAS.
+ *    Author: Neil Armstrong <narmstrong@baylibre.com>
+ *    Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s805y.dtsi"
+
+/ {
+	compatible = "xiaomi,aquaman", "amlogic,s805y", "amlogic,meson-gxl";
+	model = "Xiaomi Mi TV Stick (aquaman)";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	vddio_boot: regulator-vddio-boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio-ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "XIAOMI-AQUAMAN";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module (Amlogic W155S1 / Realtek RTL8821CS) */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	sdio: wifi@1 {
+		reg = <1>;
+	};
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+/*
+ * This is connected to the Bluetooth module
+ * Note: There's no driver for the Bluetooth module of some variants yet.
+ */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+	vbus-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi
new file mode 100644
index 000000000000..49b29b71f732
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Ferass El Hafidi <funderscore@postmarketos.org>
+ */
+
+#include "meson-gxl-s805x.dtsi"
+
+/ {
+	compatible = "amlogic,s805y", "amlogic,meson-gxl";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index c1470416faad..7dffeb5931c9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -102,8 +102,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
index 92c425d0259c..ff9145d49090 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
@@ -21,8 +21,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index 2b94b6e5285e..4ca90ac947b7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -116,8 +116,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
index 89fe5110f7a2..62a2da766a00 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -115,8 +115,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* SD card */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index fea65f20523a..4e89d6f6bb57 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -67,6 +67,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "KHADAS-VIM";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -207,8 +211,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal> , <&xtal>;
-	clock-names = "clkin0", "clkin1" ;
 };
 
 &pwm_ef {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
index 63b20860067c..6cbdfde00e12 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
@@ -160,6 +160,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "LIBRETECH-CC-V2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 8b26c9661be1..401064b0428d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -142,6 +142,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index c79f9f2099bf..236cedec9f19 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -145,8 +145,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 9b4ea6a49398..8b41e340f919 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -50,6 +50,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index 7e7dc87ede2d..05a0d4de3ad7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -101,8 +101,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
@@ -134,9 +132,8 @@
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts
index de996e930b82..a9c5881c9783 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts
@@ -90,6 +90,11 @@
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index f58d1790de1c..ba535010a3c9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -163,7 +163,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -180,7 +180,7 @@
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -188,7 +188,7 @@
 			mux {
 				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -214,7 +214,7 @@
 				groups = "i2c_sck_ao",
 				       "i2c_sda_ao";
 				function = "i2c_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -522,7 +522,7 @@
 				groups = "uart_tx_a",
 				       "uart_rx_a";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -540,7 +540,7 @@
 				groups = "uart_tx_b",
 				       "uart_rx_b";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -558,7 +558,7 @@
 				groups = "uart_tx_c",
 				       "uart_rx_c";
 				function = "uart_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -576,7 +576,7 @@
 				groups = "i2c_sck_a",
 				     "i2c_sda_a";
 				function = "i2c_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -585,7 +585,7 @@
 				groups = "i2c_sck_b",
 				      "i2c_sda_b";
 				function = "i2c_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -594,7 +594,7 @@
 				groups = "i2c_sck_c",
 				      "i2c_sda_c";
 				function = "i2c_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -603,7 +603,7 @@
 				groups = "i2c_sck_c_dv19",
 				      "i2c_sda_c_dv18";
 				function = "i2c_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -809,6 +809,31 @@
 	};
 };
 
+&pwm_ab {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_AO_ab {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+};
+
+&pwm_cd {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_ef {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
 &pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 07e7c3bedea0..2a09b3d550e2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -150,6 +150,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "KHADAS-VIM2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -285,16 +289,12 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &pwm_ef {
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &sd_emmc_a {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index ad2dd4ad0a31..773107cc47dd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -86,6 +86,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "NEXBOX-A1";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
index d4858afa0e9c..feb31207773f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
@@ -72,8 +72,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
index d02b80d77378..6c8bec1853ac 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
@@ -21,8 +21,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index d05dde8da5c5..9d5a481b309f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -101,6 +101,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "RBOX-PRO";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -188,8 +192,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
@@ -215,7 +217,7 @@
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: brcmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts
new file mode 100644
index 000000000000..ba871f3f53bb
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ *
+ * Debug UART (3.3V, 115200 baud) at the corner of the board:
+ *   (4) (3) (2) [1]
+ *   Vcc RXD TXD GND
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "ugoos,am3", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Ugoos AM3";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+};
+
+&cvbs_connector {
+	/* Not used on this board */
+	status = "disabled";
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_b_pins>;
+
+	rtc: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+/* WLAN: Atheros 10k (QCA9377) */
+&sd_emmc_a {
+	max-frequency = <200000000>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	max-frequency = <100000000>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index 411cc312fc62..514c9bea6423 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -64,6 +64,12 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -75,6 +81,12 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -86,6 +98,12 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -97,6 +115,12 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index e78cc9b577a0..7daa9b122d5c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -182,6 +182,10 @@
 				"TODDR_B IN 0", "TDMIN_A OUT",
 				"TODDR_C IN 0", "TDMIN_A OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
index 082b72703cdf..ac9c4c2673b1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
@@ -200,6 +200,10 @@
 				 <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
 				 <&dioo2133>;
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -454,24 +458,18 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 };
 
 &pwm_ab {
 	status = "okay";
 	pinctrl-0 = <&pwm_b_x7_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 };
 
 &pwm_cd {
 	status = "okay";
 	pinctrl-0 = <&pwm_d_x3_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
index 983caddc409c..6730c44642d2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -34,6 +34,111 @@
 			no-map;
 		};
 	};
+
+	sdio_32k: sdio-32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&sdio_32k>;
+		clock-names = "ext_clock";
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+	       compatible = "regulator-fixed";
+	       regulator-name = "VDDIO_AO1V8";
+	       regulator-min-microvolt = <1800000>;
+	       regulator-max-microvolt = <1800000>;
+	       vin-supply = <&vddao_3v3>;
+	       regulator-always-on;
+	};
+
+	/* SY8120B1ABC DC/DC Regulator. */
+	vddcpu: regulator-vddcpu {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <689000>;
+		regulator-max-microvolt = <1049000>;
+
+		vin-supply = <&main_12v>;
+
+		pwms = <&pwm_ij 1 1500 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+		/* Voltage Duty-Cycle */
+		voltage-table = <1049000 0>,
+				<1039000 3>,
+				<1029000 6>,
+				<1019000 9>,
+				<1009000 12>,
+				<999000 14>,
+				<989000 17>,
+				<979000 20>,
+				<969000 23>,
+				<959000 26>,
+				<949000 29>,
+				<939000 31>,
+				<929000 34>,
+				<919000 37>,
+				<909000 40>,
+				<899000 43>,
+				<889000 45>,
+				<879000 48>,
+				<869000 51>,
+				<859000 54>,
+				<849000 56>,
+				<839000 59>,
+				<829000 62>,
+				<819000 65>,
+				<809000 68>,
+				<799000 70>,
+				<789000 73>,
+				<779000 76>,
+				<769000 79>,
+				<759000 81>,
+				<749000 84>,
+				<739000 87>,
+				<729000 89>,
+				<719000 92>,
+				<709000 95>,
+				<699000 98>,
+				<689000 100>;
+	};
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins1>;
+	pinctrl-names = "default";
+};
+
+&pwm_ij {
+	status = "okay";
 };
 
 &uart_b {
@@ -46,6 +151,40 @@
 	pinctrl-names = "default";
 };
 
+&sdio {
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	no-sd;
+	no-mmc;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+&sd {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
 &nand {
 	status = "okay";
 	#address-cells = <1>;
@@ -90,3 +229,9 @@
 	pinctrl-0 = <&spicc0_pins_x>;
 	cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
 };
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index b686eacb9662..9d99ed2994df 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
 #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
 #include <dt-bindings/power/meson-s4-power.h>
+#include <dt-bindings/reset/amlogic,meson-s4-reset.h>
 
 / {
 	cpus {
@@ -466,6 +467,93 @@
 					};
 				};
 
+				sdcard_pins: sdcard-pins {
+					mux {
+						groups = "sdcard_d0_c",
+							 "sdcard_d1_c",
+							 "sdcard_d2_c",
+							 "sdcard_d3_c",
+							 "sdcard_clk_c",
+							 "sdcard_cmd_c";
+						function = "sdcard";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdcard_clk_gate_pins: sdcard-clk-gate-pins {
+					mux {
+						groups = "GPIOC_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_pins: emmc-pins {
+					mux-0 {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "emmc_cmd";
+						function = "emmc";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+					mux-1 {
+						groups = "emmc_clk";
+						function = "emmc";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_ds_pins: emmc-ds-pins {
+					mux {
+						groups = "emmc_nand_ds";
+						function = "emmc";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_clk_gate_pins: emmc-clk-gate-pins {
+					mux {
+						groups = "GPIOB_8";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_pins: sdio-pins {
+					mux {
+						groups = "sdio_d0",
+							 "sdio_d1",
+							 "sdio_d2",
+							 "sdio_d3",
+							 "sdio_clk",
+							 "sdio_cmd";
+						function = "sdio";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_clk_gate_pins: sdio-clk-gate-pins {
+					mux {
+						groups = "GPIOX_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
 				spicc0_pins_x: spicc0-pins_x {
 					mux {
 						groups = "spi_a_mosi_x",
@@ -541,6 +629,11 @@
 				};
 			};
 
+			clk_msr: clock-measure@48000 {
+				compatible = "amlogic,s4-clk-measure";
+				reg = <0x0 0x48000 0x0 0x1c>;
+			};
+
 			spicc0: spi@50000 {
 				compatible = "amlogic,meson-g12a-spicc";
 				reg = <0x0 0x50000 0x0 0x44>;
@@ -675,6 +768,14 @@
 				#reset-cells = <1>;
 			};
 
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,s4-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
 			ir: ir@84040 {
 				compatible = "amlogic,meson-s4-ir";
 				reg = <0x0 0x84040 0x0 0x30>;
@@ -712,5 +813,45 @@
 				compatible = "snps,dwmac-mdio";
 			};
 		};
+
+		sdio: mmc@fe088000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe088000 0x0 0x800>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc_periphs CLKID_SDEMMC_A>,
+				 <&xtal>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_A>;
+			cap-sdio-irq;
+			keep-power-in-suspend;
+			status = "disabled";
+		};
+
+		sd: mmc@fe08a000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe08a000 0x0 0x800>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_periphs CLKID_SDEMMC_B>,
+				 <&clkc_periphs CLKID_SD_EMMC_B>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_B>;
+			status = "disabled";
+		};
+
+		emmc: mmc@fe08c000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe08c000 0x0 0x800>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_periphs CLKID_NAND>,
+				 <&xtal>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_NAND_EMMC>;
+			no-sdio;
+			no-sd;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
index 9b2eb6e42651..3c43d3490e14 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
index 6e34fd80ed71..445c1671ede7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
index d1fa8b8bf795..9be3084b090d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
@@ -147,28 +147,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -199,15 +195,11 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -215,8 +207,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
index 586034316ec3..eeaff22edade 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index f045bf851638..697855fec476 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -57,6 +57,10 @@
 				"Lineout", "ACODEC LOLP",
 				"Lineout", "ACODEC LORP";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index 81dce862902a..5e07f0f9538e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -185,28 +185,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
@@ -367,8 +363,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -386,11 +380,10 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	max-frequency = <50000000>;
+	/* Boot failures are observed at 50MHz */
+	max-frequency = <35000000>;
 	disable-wp;
 
-	/* TOFIX: SD card is barely usable in SDR modes */
-
 	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&tflash_vdd>;
 	vqmmc-supply = <&vddio_c>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
index e6e9410d40cb..7b3a014d4cde 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index 9c0b544e2209..a3d9b66b6878 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -51,35 +51,29 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index 951eb8e3f0c0..c4524eb4f099 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -174,6 +174,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -246,28 +250,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
@@ -388,8 +388,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
index 537370db360f..5daadfb170b4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
@@ -64,26 +64,22 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 3581e14cbf18..024d2eb8e6ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -239,6 +239,10 @@
 				"TODDR_B IN 1", "TDMIN_B OUT",
 				"TODDR_C IN 1", "TDMIN_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -355,28 +359,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
@@ -431,15 +431,11 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -447,8 +443,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
index fc9b961133cd..e4a3a2a8ad06 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
index 9ea969255b4f..fff92e0d6dd5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 97e4b52066dc..e5db8ce94062 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -55,6 +55,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -64,6 +70,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -73,6 +85,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -82,6 +100,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -90,6 +114,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x40000>; /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};
 
@@ -100,6 +127,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <770000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index ea5721ea02f0..5bbedb0a7107 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -22,7 +22,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
-			#clock-cells = <1>;
 			clocks = <&pmd0clk 0>;
 		};
 		cpu@1 {
@@ -32,7 +31,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
-			#clock-cells = <1>;
 			clocks = <&pmd0clk 0>;
 		};
 		cpu@100 {
@@ -42,7 +40,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
-			#clock-cells = <1>;
 			clocks = <&pmd1clk 0>;
 		};
 		cpu@101 {
@@ -52,7 +49,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
-			#clock-cells = <1>;
 			clocks = <&pmd1clk 0>;
 		};
 		cpu@200 {
@@ -62,7 +58,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
-			#clock-cells = <1>;
 			clocks = <&pmd2clk 0>;
 		};
 		cpu@201 {
@@ -72,7 +67,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
-			#clock-cells = <1>;
 			clocks = <&pmd2clk 0>;
 		};
 		cpu@300 {
@@ -82,7 +76,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
-			#clock-cells = <1>;
 			clocks = <&pmd3clk 0>;
 		};
 		cpu@301 {
@@ -92,7 +85,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
-			#clock-cells = <1>;
 			clocks = <&pmd3clk 0>;
 		};
 		xgene_L2_0: l2-cache-0 {
@@ -211,9 +203,9 @@
 		};
 	};
 
-	refclk: refclk {
+	refclk: clock-100000000 {
 		compatible = "fixed-clock";
-		#clock-cells = <1>;
+		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "refclk";
 	};
@@ -232,6 +224,16 @@
 		clock-frequency = <50000000>;
 	};
 
+	i2cslimpro {
+		compatible = "apm,xgene-slimpro-i2c";
+		mboxes = <&mailbox 0>;
+	};
+
+	hwmonslimpro {
+		compatible = "apm,xgene-slimpro-hwmon";
+		mboxes = <&mailbox 7>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -246,7 +248,7 @@
 			pmdpll: pmdpll@170000f0 {
 				compatible = "apm,xgene-pcppll-v2-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				reg = <0x0 0x170000f0 0x0 0x10>;
 				clock-output-names = "pmdpll";
 			};
@@ -286,7 +288,7 @@
 			socpll: socpll@17000120 {
 				compatible = "apm,xgene-socpll-v2-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				reg = <0x0 0x17000120 0x0 0x1000>;
 				clock-output-names = "socpll";
 			};
@@ -585,16 +587,6 @@
 					0x0 0x7 0x4>;
 		};
 
-		i2cslimpro {
-			compatible = "apm,xgene-slimpro-i2c";
-			mboxes = <&mailbox 0>;
-		};
-
-		hwmonslimpro {
-			compatible = "apm,xgene-slimpro-hwmon";
-			mboxes = <&mailbox 7>;
-		};
-
 		serial0: serial@10600000 {
 			compatible = "ns16550";
 			reg = <0 0x10600000 0x0 0x1000>;
@@ -617,7 +609,7 @@
 		pcie0: pcie@1f2b0000 {
 			status = "disabled";
 			device_type = "pci";
-			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			compatible = "apm,xgene-pcie";
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
@@ -643,7 +635,7 @@
 		pcie1: pcie@1f2c0000 {
 			status = "disabled";
 			device_type = "pci";
-			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			compatible = "apm,xgene-pcie";
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
@@ -809,7 +801,6 @@
 			interrupts = <0 0x45 0x4>;
 			#clock-cells = <1>;
 			clocks = <&sbapbclk 0>;
-			bus_num = <1>;
 		};
 
 		i2c4: i2c@10640000 {
@@ -819,7 +810,6 @@
 			reg = <0x0 0x10640000 0x0 0x1000>;
 			interrupts = <0 0x3a 0x4>;
 			clocks = <&i2c4clk 0>;
-			bus_num = <4>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 532401bc9c66..4ca0ead120c1 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -103,6 +103,7 @@
 
 	gic: interrupt-controller@78010000 {
 		compatible = "arm,cortex-a15-gic";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x78010000 0x0 0x1000>,	/* GIC Dist */
@@ -112,9 +113,9 @@
 		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
 	};
 
-	refclk: refclk {
+	refclk: clock-100000000 {
 		compatible = "fixed-clock";
-		#clock-cells = <1>;
+		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "refclk";
 	};
@@ -133,6 +134,16 @@
 		interrupts = <1 12 0xff04>;
 	};
 
+	i2cslimpro {
+		compatible = "apm,xgene-slimpro-i2c";
+		mboxes = <&mailbox 0>;
+	};
+
+	hwmonslimpro {
+		compatible = "apm,xgene-slimpro-hwmon";
+		mboxes = <&mailbox 7>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -148,28 +159,25 @@
 			pcppll: pcppll@17000100 {
 				compatible = "apm,xgene-pcppll-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				clock-names = "pcppll";
 				reg = <0x0 0x17000100 0x0 0x1000>;
 				clock-output-names = "pcppll";
-				type = <0>;
 			};
 
 			socpll: socpll@17000120 {
 				compatible = "apm,xgene-socpll-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				clock-names = "socpll";
 				reg = <0x0 0x17000120 0x0 0x1000>;
 				clock-output-names = "socpll";
-				type = <1>;
 			};
 
 			socplldiv2: socplldiv2  {
 				compatible = "fixed-factor-clock";
-				#clock-cells = <1>;
+				#clock-cells = <0>;
 				clocks = <&socpll 0>;
-				clock-names = "socplldiv2";
 				clock-mult = <1>;
 				clock-div = <2>;
 				clock-output-names = "socplldiv2";
@@ -178,7 +186,7 @@
 			ahbclk: ahbclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "div-reg";
 				divider-offset = <0x164>;
@@ -190,7 +198,7 @@
 			sdioclk: sdioclk@1f2ac000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2ac000 0x0 0x1000
 					0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg", "div-reg";
@@ -207,7 +215,7 @@
 			ethclk: ethclk {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				clock-names = "ethclk";
 				reg = <0x0 0x17000000 0x0 0x1000>;
 				reg-names = "div-reg";
@@ -229,7 +237,7 @@
 			sge0clk: sge0clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0xa>;
@@ -240,7 +248,7 @@
 			xge0clk: xge0clk@1f61c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f61c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0x3>;
@@ -251,7 +259,7 @@
 				compatible = "apm,xgene-device-clock";
 				status = "disabled";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f62c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0x3>;
@@ -261,7 +269,7 @@
 			sataphy1clk: sataphy1clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy1clk";
@@ -275,7 +283,7 @@
 			sataphy2clk: sataphy1clk@1f22c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f22c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy2clk";
@@ -289,7 +297,7 @@
 			sataphy3clk: sataphy1clk@1f23c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f23c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy3clk";
@@ -303,7 +311,7 @@
 			sata01clk: sata01clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata01clk";
@@ -316,7 +324,7 @@
 			sata23clk: sata23clk@1f22c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f22c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata23clk";
@@ -329,7 +337,7 @@
 			sata45clk: sata45clk@1f23c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f23c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata45clk";
@@ -342,7 +350,7 @@
 			rtcclk: rtcclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg";
 				csr-offset = <0xc>;
@@ -355,7 +363,7 @@
 			rngpkaclk: rngpkaclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg";
 				csr-offset = <0xc>;
@@ -369,7 +377,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2bc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie0clk";
@@ -379,7 +387,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2cc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie1clk";
@@ -389,7 +397,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2dc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie2clk";
@@ -399,7 +407,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f50c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie3clk";
@@ -409,7 +417,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f51c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie4clk";
@@ -418,7 +426,7 @@
 			dmaclk: dmaclk@1f27c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f27c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "dmaclk";
@@ -760,16 +768,6 @@
 					<0x0 0x7 0x4>;
 		};
 
-		i2cslimpro {
-			compatible = "apm,xgene-slimpro-i2c";
-			mboxes = <&mailbox 0>;
-		};
-
-		hwmonslimpro {
-			compatible = "apm,xgene-slimpro-hwmon";
-			mboxes = <&mailbox 7>;
-		};
-
 		serial0: serial@1c020000 {
 			status = "disabled";
 			compatible = "ns16550a";
@@ -849,9 +847,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0x0 0x10512000 0x0 0x1000>;
 			interrupts = <0 0x44 0x4>;
-			#clock-cells = <1>;
 			clocks = <&ahbclk 0>;
-			bus_num = <0>;
 		};
 
 		phy1: phy@1f21a000 {
@@ -997,7 +993,7 @@
 				compatible = "apm,xgene-mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				menetphy: menetphy@3 {
+				menetphy: ethernet-phy@3 {
 					compatible = "ethernet-phy-id001c.c915";
 					reg = <0x3>;
 				};
diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile
index aec5e29cdfb7..4eebcd85c90f 100644
--- a/arch/arm64/boot/dts/apple/Makefile
+++ b/arch/arm64/boot/dts/apple/Makefile
@@ -1,4 +1,73 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j71.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j73.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j85m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j86m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j87m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-n53.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j72.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j85.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j86.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j87.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-n51.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-j42d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-j96.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-j97.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-n102.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-n56.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-n61.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7001-j81.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7001-j82.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-j71s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-j72s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-n66.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-n69u.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-n71.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-j71t.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-j72t.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-n66m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-n69.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-n71m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8001-j127.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8001-j128.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8001-j98a.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8001-j99a.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-d101.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-d10.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-d111.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-d11.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-j171.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-j172.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-j71b.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-j72b.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-n112.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j105a.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j120.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j121.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j207.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j208.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j132.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j137.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j140a.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j140k.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j152f.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j160.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j174.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j185.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j185f.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j213.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j215.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j223.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j230k.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j214k.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j680.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j780.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d201.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d20.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d211.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d21.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d221.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d22.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j274.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j293.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j313.dtb
@@ -10,6 +79,15 @@ dtb-$(CONFIG_ARCH_APPLE) += t6000-j316s.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6001-j316c.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6001-j375c.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6002-j375d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6022-j180d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j414s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j414c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j416s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j416c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j474s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j475c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6022-j475d.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8112-j413.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j415.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8112-j473.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8112-j493.dtb
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-5s.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-5s.dtsi
new file mode 100644
index 000000000000..8868df1538d6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-5s.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 5s common device tree
+ * Based on A7 (APL0698), up to 1.3GHz
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s5l8960x.dtsi"
+#include "s5l8960x-common.dtsi"
+#include "s5l8960x-opp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&dwi_bl {
+	status = "okay";
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-air1.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-air1.dtsi
new file mode 100644
index 000000000000..dd57eb1d34c0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-air1.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air  common device tree
+ * Based on A7 (APL5698), up to 1.4GHz
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s5l8960x.dtsi"
+#include "s5l8960x-common.dtsi"
+#include "s5l8965x-opp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl 110 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-common.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-common.dtsi
new file mode 100644
index 000000000000..243480ca2356
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-common.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 5s, iPad mini 2/3, iPad Air
+ *
+ * This file contains parts common to all Apple A7 devices.
+ *
+ * target-type: J71, J72, J73, J85, J85m, J86, J86m, J87, J87m, N51, N53
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j71.dts b/arch/arm64/boot/dts/apple/s5l8960x-j71.dts
new file mode 100644
index 000000000000..e13036dacb45
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j71.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air (Wi-Fi), J71, iPad4,1 (A1474)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-air1.dtsi"
+
+/ {
+	compatible = "apple,j71", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad Air (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j72.dts b/arch/arm64/boot/dts/apple/s5l8960x-j72.dts
new file mode 100644
index 000000000000..afb71b8885c6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j72.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air (Cellular), J72, iPad4,2 (A1475)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-air1.dtsi"
+
+/ {
+	compatible = "apple,j72", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad Air (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j73.dts b/arch/arm64/boot/dts/apple/s5l8960x-j73.dts
new file mode 100644
index 000000000000..c871962df529
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j73.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air (Cellular, China), J73, iPad4,2 (A1476)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-air1.dtsi"
+
+/ {
+	compatible = "apple,j73", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad Air (Cellular, China)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j85.dts b/arch/arm64/boot/dts/apple/s5l8960x-j85.dts
new file mode 100644
index 000000000000..aefb7b36d7aa
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j85.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 2 (Wi-Fi), J85, iPad4,4 (A1489)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini2.dtsi"
+
+/ {
+	compatible = "apple,j85", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 2 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j85m.dts b/arch/arm64/boot/dts/apple/s5l8960x-j85m.dts
new file mode 100644
index 000000000000..ec2bcaa6d1d5
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j85m.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 3 (Wi-Fi), J85m, iPad4,7 (A1599)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini3.dtsi"
+
+/ {
+	compatible = "apple,j85m", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 3 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j86.dts b/arch/arm64/boot/dts/apple/s5l8960x-j86.dts
new file mode 100644
index 000000000000..470f2f825e70
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j86.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 2 (Cellular), J86, iPad4,5 (A1490)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini2.dtsi"
+
+/ {
+	compatible = "apple,j86", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 2 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j86m.dts b/arch/arm64/boot/dts/apple/s5l8960x-j86m.dts
new file mode 100644
index 000000000000..90311d98aaad
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j86m.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 3 (Cellular), J86m, iPad4,8 (A1600)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini3.dtsi"
+
+/ {
+	compatible = "apple,j86m", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 3 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j87.dts b/arch/arm64/boot/dts/apple/s5l8960x-j87.dts
new file mode 100644
index 000000000000..3580fd8e3831
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j87.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 2 (Cellular, China), J87, iPad4,6 (A1491)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini2.dtsi"
+
+/ {
+	compatible = "apple,j87", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 2 (Cellular, China)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j87m.dts b/arch/arm64/boot/dts/apple/s5l8960x-j87m.dts
new file mode 100644
index 000000000000..fa0da4fa6727
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j87m.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 3 (Cellular, China), J87m, iPad4,9 (A1601)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini3.dtsi"
+
+/ {
+	compatible = "apple,j87m", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 3 (Cellular, China)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-mini2.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-mini2.dtsi
new file mode 100644
index 000000000000..f3696d22e71c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-mini2.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 2 common device tree
+ * Based on A7 (APL0698), up to 1.3GHz
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s5l8960x.dtsi"
+#include "s5l8960x-common.dtsi"
+#include "s5l8960x-opp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-mini3.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-mini3.dtsi
new file mode 100644
index 000000000000..4e397b3d7d7a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-mini3.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 3 common device tree
+ * Based on A7 (APL0698), up to 1.3GHz
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/*
+ * The Mini 3 seems to be only an iteration over the Mini 2 with some
+ * small changes, like the introduction of Touch ID, hence there is little
+ * to no differentiation between these 2 for now.
+ */
+#include "s5l8960x-mini2.dtsi"
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-n51.dts b/arch/arm64/boot/dts/apple/s5l8960x-n51.dts
new file mode 100644
index 000000000000..cd52f814fbf2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-n51.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 5s (GSM), N51, iPhone6,1 (A1453/A1533)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-5s.dtsi"
+
+/ {
+	compatible = "apple,n51", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPhone 5s (GSM)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-n53.dts b/arch/arm64/boot/dts/apple/s5l8960x-n53.dts
new file mode 100644
index 000000000000..4795798a4444
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-n53.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 5s (LTE), N53, iPhone6,2 (A1457/A1518/A1528/A1530)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-5s.dtsi"
+
+/ {
+	compatible = "apple,n53", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPhone 5s (LTE)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-opp.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-opp.dtsi
new file mode 100644
index 000000000000..e4d568c4a119
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-opp.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Operating points for Apple S5L8960X "A7" SoC, Up to 1296 MHz
+ *
+ * target-type: N51, N53, J85, J86. J87, J85m, J86m, J87m
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	cyclone_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <15500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <43000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <26000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <4>;
+			clock-latency-ns = <30000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <5>;
+			clock-latency-ns = <39500>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-level = <6>;
+			clock-latency-ns = <45500>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-pmgr.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-pmgr.dtsi
new file mode 100644
index 000000000000..da265f484307
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-pmgr.dtsi
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple S5L8960X "A7" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@20000 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@20008 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_secuart0: power-controller@200f0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "secuart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_secuart1: power-controller@200f8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "secuart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_cpm: power-controller@20010 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_lio: power-controller@20018 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "lio";
+		apple,always-on; /* Core device */
+	};
+
+	ps_iomux: power-controller@20020 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "iomux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@20028 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_debug: power-controller@20030 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_dwi: power-controller@20038 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20038 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@20040 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_mca0: power-controller@20048 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@20050 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@20058 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@20060 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20060 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@20068 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20068 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@20070 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20070 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@20078 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20078 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@20080 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20080 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@20088 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20088 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@20090 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20090 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@20098 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20098 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@200a0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@200a8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@200b0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@200b8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@200c0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@200c8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@200d0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@200d8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@200e0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@200e8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio_p: power-controller@20110 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+	};
+
+	ps_usb: power-controller@20158 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@20160 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@20170 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@20180 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_disp_busmux: power-controller@201a8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp_busmux";
+	};
+
+	ps_media: power-controller@201d8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@201d0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+	};
+
+	ps_msr: power-controller@201e0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@201e8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@201b0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_aes0: power-controller@20100 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@20108 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@20118 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_hsic1_phy: power-controller@20120 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_hsic2_phy: power-controller@20128 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic2_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_ispsens0: power-controller@20130 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@20138 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_mcc: power-controller@20140 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Core device */
+	};
+
+	ps_mcu: power-controller@20148 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcu";
+		apple,always-on; /* Core device */
+	};
+
+	ps_amp: power-controller@20150 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "amp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb2host0_ohci: power-controller@20168 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usb2host1_ohci: power-controller@20178 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1_ohci";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_usbotg: power-controller@20188 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@20190 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@20198 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_cp: power-controller@201a0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_mipi_dsi: power-controller@201b8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_dp: power-controller@201c0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_disp1: power-controller@201c8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_vdec: power-controller@201f0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc: power-controller@201f8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_ans: power-controller@20200 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+	};
+
+	ps_ans_dll: power-controller@20208 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans_dll";
+		power-domains = <&ps_ans>;
+	};
+
+	ps_gfx: power-controller@20218 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@20268 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		power-domains = <&ps_secuart1>, <&ps_secuart0>;
+		apple,always-on; /* Locked on */
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x.dtsi b/arch/arm64/boot/dts/apple/s5l8960x.dtsi
new file mode 100644
index 000000000000..462ffdd348fc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S5L8960X "A7" SoC
+ *
+ * Other Names: H6, "Alcatraz"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ * Based on Asahi Linux's M1 (t8103.dtsi) and Corellium's A10 efforts.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,cyclone";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&cyclone_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,cyclone";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&cyclone_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,s5l8960x-cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0a0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0a0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 140 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 154 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 155 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 156 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 157 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,s5l8960x-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x24000>;
+		};
+
+		wdt: watchdog@20e027000 {
+			compatible = "apple,s5l8960x-wdt", "apple,wdt";
+			reg = <0x2 0x0e027000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,s5l8960x-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200010 {
+			compatible = "apple,s5l8960x-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200010 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@20e300000 {
+			compatible = "apple,s5l8960x-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0e300000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 200>;
+			apple,npins = <200>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(81, 1)>,
+					 <APPLE_PINMUX(80, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(83, 1)>,
+					 <APPLE_PINMUX(82, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(101, 1)>,
+					 <APPLE_PINMUX(100, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(172, 1)>,
+					 <APPLE_PINMUX(171, 1)>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A7 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "s5l8960x-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/s5l8965x-opp.dtsi b/arch/arm64/boot/dts/apple/s5l8965x-opp.dtsi
new file mode 100644
index 000000000000..d34dae74a90c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8965x-opp.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Operating points for Apple S5L8965X "A7" Rev A SoC, Up to 1392 MHz
+ *
+ * target-type: J71, J72, J73
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	cyclone_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <10000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <2>;
+			clock-latency-ns = <49000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <3>;
+			clock-latency-ns = <30000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <4>;
+			clock-latency-ns = <39500>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-level = <5>;
+			clock-latency-ns = <45500>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1392000000>;
+			opp-level = <6>;
+			clock-latency-ns = <46500>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s800-0-3-common.dtsi b/arch/arm64/boot/dts/apple/s800-0-3-common.dtsi
new file mode 100644
index 000000000000..cb42c5f2c1b6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800-0-3-common.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s, iPhone 6s Plus, iPad 5, iPhone SE
+ *
+ * This file contains parts common to all Apple A9 devices.
+ *
+ * target-type: J71s, J72s, N66, N69u, N71, J71t, J72t, N66m, N69, N71m
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&dwi_bl {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi b/arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi
new file mode 100644
index 000000000000..196b8e745a95
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi
@@ -0,0 +1,757 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple S8000/3 "A9" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80150 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80158 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pcie_ref: power-controller@80148 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80168 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80170 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80178 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80180 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80188 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@80190 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@80198 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801a0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801b0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@801f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@801f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80160 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_hsic1_phy: power-controller@80130 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_isp_sens0: power-controller@80138 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80140 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_usb: power-controller@80250 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80258 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80260 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80270 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@80280 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+	};
+
+	ps_media: power-controller@802d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@802c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@802e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@802d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@802b0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_pmp: power-controller@802e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@802f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_uart5: power-controller@80200 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@80208 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80210 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80218 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@80220 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80228 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80230 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80238 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80240 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80248 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_usb2host0_ohci: power-controller@80268 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usb2host1_ohci: power-controller@80278 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1_ohci";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_usb2host2_ohci: power-controller@80288 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2_ohci";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_usbotg: power-controller@80290 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@80298 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802a0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mipi_dsi: power-controller@802b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_dp: power-controller@802c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_vdec: power-controller@802f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc: power-controller@80308 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@80310 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@80318 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_pcie_link0: power-controller@80320 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link0";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link1: power-controller@80328 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link1";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link2: power-controller@80330 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link2";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link3: power-controller@80338 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link3";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_gfx: power-controller@80340 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_venc_pipe: power-controller@88000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@88008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_busif &ps_aop_cpu &ps_aop_filter>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+		power-domains = <&ps_aop>;
+	};
+
+	ps_aop_cpu: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80048 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80050 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s800-0-3.dtsi b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
new file mode 100644
index 000000000000..bb38662b7d2e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8000/S8003 "A9" SoC
+ *
+ * This file contains parts common to both variants of A9
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,twister";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,twister";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,s8000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 206 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 207 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 208 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,s8000-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200080 {
+			compatible = "apple,s8000-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200080 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 208>;
+			apple,npins = <208>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(46, 1)>,
+					 <APPLE_PINMUX(45, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(115, 1)>,
+					 <APPLE_PINMUX(114, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(23, 1)>,
+					 <APPLE_PINMUX(22, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 42>;
+			apple,npins = <42>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 119 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2102b0000 {
+			compatible = "apple,s8000-wdt", "apple,wdt";
+			reg = <0x2 0x102b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A9 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "s800-0-3-pmgr.dtsi"
+
+/*
+ * The A9 was made by two separate fabs on two different process
+ * nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
+ */
diff --git a/arch/arm64/boot/dts/apple/s8000-j71s.dts b/arch/arm64/boot/dts/apple/s8000-j71s.dts
new file mode 100644
index 000000000000..b5a2dfa1121e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-j71s.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 (Wi-Fi) (Samsung), J71s, iPad6,11 (A1822)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-ipad5.dtsi"
+
+/ {
+	compatible = "apple,j71s", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPad 5 (Wi-Fi) (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000-j72s.dts b/arch/arm64/boot/dts/apple/s8000-j72s.dts
new file mode 100644
index 000000000000..8f3dea5adb09
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-j72s.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 (Cellular) (Samsung), J72s, iPad6,12 (A1823)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-ipad5.dtsi"
+
+/ {
+	compatible = "apple,j72s", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPad 5 (Cellular) (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000-n66.dts b/arch/arm64/boot/dts/apple/s8000-n66.dts
new file mode 100644
index 000000000000..30b4b6630b60
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-n66.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s Plus (Samsung), N66, iPhone8,2 (A1634/A1687/A1690/A1699)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-6s.dtsi"
+
+/ {
+	compatible = "apple,n66", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPhone 6s Plus (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000-n69u.dts b/arch/arm64/boot/dts/apple/s8000-n69u.dts
new file mode 100644
index 000000000000..e63bc2e7f7c1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-n69u.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone SE (Samsung), N69u, iPhone8,4 (A1662/A1723/A1724)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-se.dtsi"
+
+/ {
+	compatible = "apple,n69u", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPhone SE (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000-n71.dts b/arch/arm64/boot/dts/apple/s8000-n71.dts
new file mode 100644
index 000000000000..f2964a1fc434
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-n71.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s (Samsung), N71, iPhone8,1 (A1633/A1688/A1691/A1700)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-6s.dtsi"
+
+/ {
+	compatible = "apple,n71", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPhone 6s (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000.dtsi b/arch/arm64/boot/dts/apple/s8000.dtsi
new file mode 100644
index 000000000000..72322f5677ab
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8000 "A9" (Samsung) SoC
+ *
+ * Other names: H8P, "Maui"
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+#include "s800-0-3.dtsi"
+
+/ {
+	twister_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <650>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <75000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <27000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <4>;
+			clock-latency-ns = <32000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-level = <5>;
+			clock-latency-ns = <35000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <6>;
+			clock-latency-ns = <45000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-level = <7>;
+			clock-latency-ns = <58000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <1844000000>;
+			opp-level = <8>;
+			clock-latency-ns = <58000>;
+			turbo-mode;
+		};
+#endif
+	};
+};
+
+/*
+ * The A9 was made by two separate fabs on two different process
+ * nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
+ */
diff --git a/arch/arm64/boot/dts/apple/s8001-common.dtsi b/arch/arm64/boot/dts/apple/s8001-common.dtsi
new file mode 100644
index 000000000000..91b06e113894
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-common.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (9.7-inch), iPad Pro (12.9-inch)
+ *
+ * This file contains parts common to all Apple A9X devices.
+ *
+ * target-type: J127, J128, J98a, J99a
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0 &ps_dp0>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j127.dts b/arch/arm64/boot/dts/apple/s8001-j127.dts
new file mode 100644
index 000000000000..8b522085cb3e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j127.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (9.7-inch) (Wi-Fi), J127, iPad6,3 (A1673)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8001-pro.dtsi"
+
+/ {
+	compatible = "apple,j127", "apple,s8001", "apple,arm-platform";
+	model = "Apple iPad Pro (9.7-inch) (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j128.dts b/arch/arm64/boot/dts/apple/s8001-j128.dts
new file mode 100644
index 000000000000..cdd3d06dcbf1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j128.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (9.7-inch) (Cellular), J128, iPad6,4 (A1674/A1675)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8001-pro.dtsi"
+
+/ {
+	compatible = "apple,j128", "apple,s8001", "apple,arm-platform";
+	model = "Apple iPad Pro (9.7-inch) (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j98a-j99a.dtsi b/arch/arm64/boot/dts/apple/s8001-j98a-j99a.dtsi
new file mode 100644
index 000000000000..e66a4c1c138f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j98a-j99a.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (12.9-inch)
+ *
+ * This file contains parts common to iPad Pro (12.9-inch).
+ *
+ * target-type: J98a, J99a
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+&ps_dcs4 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs5 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs6 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs7 {
+	apple,always-on; /* LPDDR4 interface */
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j98a.dts b/arch/arm64/boot/dts/apple/s8001-j98a.dts
new file mode 100644
index 000000000000..162eca05c2d9
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j98a.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (12.9-inch) (Wi-Fi), J98a, iPad6,7 (A1584)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8001-pro.dtsi"
+#include "s8001-j98a-j99a.dtsi"
+
+/ {
+	compatible = "apple,j98a", "apple,s8001", "apple,arm-platform";
+	model = "Apple iPad Pro (12.9-inch) (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j99a.dts b/arch/arm64/boot/dts/apple/s8001-j99a.dts
new file mode 100644
index 000000000000..7b765820c69e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j99a.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (12.9-inch) (Cellular), J99a, iPad6,8 (A1652)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8001-pro.dtsi"
+#include "s8001-j98a-j99a.dtsi"
+
+/ {
+	compatible = "apple,j99a", "apple,s8001", "apple,arm-platform";
+	model = "Apple iPad Pro (12.9-inch) (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-pmgr.dtsi b/arch/arm64/boot/dts/apple/s8001-pmgr.dtsi
new file mode 100644
index 000000000000..859ab77ae92b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-pmgr.dtsi
@@ -0,0 +1,822 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple S8001 "A9X" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80148 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80150 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pcie_ref: power-controller@80140 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80160 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80168 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80170 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80178 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80180 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@80188 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@80190 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@80198 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801a0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801b0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@801e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@801f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@801f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80158 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_isp_sens0: power-controller@80130 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80138 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb: power-controller@80278 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80280 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80288 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80298 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@802a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_disp1mux: power-controller@802e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1mux";
+	};
+
+	ps_disp0: power-controller@802d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_disp1: power-controller@802f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp1mux>;
+	};
+
+	ps_uart6: power-controller@80200 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80208 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80210 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@80218 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80230 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80238 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80240 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80248 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80250 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs4: power-controller@80258 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+	};
+
+	ps_dcs5: power-controller@80260 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+	};
+
+	ps_dcs6: power-controller@80268 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+	};
+
+	ps_dcs7: power-controller@80270 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+	};
+
+	ps_usb2host0_ohci: power-controller@80290 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@802b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@802c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_dp0: power-controller@802e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp0";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_dp1: power-controller@802f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp1";
+		power-domains = <&ps_disp1>;
+	};
+
+	ps_dpa0: power-controller@80220 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa0";
+	};
+
+	ps_dpa1: power-controller@80228 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa1";
+	};
+
+	ps_media: power-controller@80308 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@80300 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@80318 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@80310 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc: power-controller@80340 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@80348 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_srs: power-controller@80390 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "srs";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie_aux: power-controller@80350 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_pcie_link0: power-controller@80358 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link0";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link1: power-controller@80360 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link1";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link2: power-controller@80368 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link2";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link3: power-controller@80370 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link3";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link4: power-controller@80378 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link4";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link5: power-controller@80380 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link5";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_vdec: power-controller@80330 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_gfx: power-controller@80388 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_pmp: power-controller@80320 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@80328 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on*/
+	};
+
+	ps_venc_pipe: power-controller@88000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@88008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_cpu &ps_aop_filter &ps_aop_busif>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+	};
+
+	ps_aop_cpu: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80048 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80050 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-pro.dtsi b/arch/arm64/boot/dts/apple/s8001-pro.dtsi
new file mode 100644
index 000000000000..1fce5a7c4200
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-pro.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (1st generation) common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s8001.dtsi"
+#include "s8001-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 122 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 123 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s8001.dtsi b/arch/arm64/boot/dts/apple/s8001.dtsi
new file mode 100644
index 000000000000..b5b00dca6ffa
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001.dtsi
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8001 "A9X" SoC
+ *
+ * Other names: H8G, "Elba"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,twister";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,twister";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>;
+		};
+	};
+
+	twister_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <800>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <53000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-level = <3>;
+			clock-latency-ns = <18000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1080000000>;
+			opp-level = <4>;
+			clock-latency-ns = <21000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-level = <5>;
+			clock-latency-ns = <25000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-level = <6>;
+			clock-latency-ns = <33000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2160000000>;
+			opp-level = <7>;
+			clock-latency-ns = <45000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <2160000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,s8000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 218 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 234 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 235 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,s8000-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 219>;
+			apple,npins = <219>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(165, 1)>,
+					 <APPLE_PINMUX(164, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(178, 1)>,
+					 <APPLE_PINMUX(177, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(132, 1)>,
+					 <APPLE_PINMUX(131, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(115, 1)>,
+					 <APPLE_PINMUX(114, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 28>;
+			apple,npins = <28>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 134 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2102b0000 {
+			compatible = "apple,s8000-wdt", "apple,wdt";
+			reg = <0x2 0x102b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A9X doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "s8001-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/s8003-j71t.dts b/arch/arm64/boot/dts/apple/s8003-j71t.dts
new file mode 100644
index 000000000000..0d906ae80b07
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-j71t.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 (Wi-Fi) (TSMC), J71t, iPad6,11 (A1822)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-ipad5.dtsi"
+
+/ {
+	compatible = "apple,j71t", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPad 5 (Wi-Fi) (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003-j72t.dts b/arch/arm64/boot/dts/apple/s8003-j72t.dts
new file mode 100644
index 000000000000..0cd7d88e9dfb
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-j72t.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 (Cellular) (TSMC), J72t, iPad6,12 (A1823)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-ipad5.dtsi"
+
+/ {
+	compatible = "apple,j72t", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPad 5 (Cellular) (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003-n66m.dts b/arch/arm64/boot/dts/apple/s8003-n66m.dts
new file mode 100644
index 000000000000..4146cd28160d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-n66m.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s Plus (TSMC), N66m, iPhone8,2 (A1634/A1687/A1690/A1699)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-6s.dtsi"
+
+/ {
+	compatible = "apple,n66m", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPhone 6s Plus (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003-n69.dts b/arch/arm64/boot/dts/apple/s8003-n69.dts
new file mode 100644
index 000000000000..8eed879b155e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-n69.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone SE (TSMC), N69, iPhone8,4 (A1662/A1723/A1724)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-se.dtsi"
+
+/ {
+	compatible = "apple,n69", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPhone SE (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003-n71m.dts b/arch/arm64/boot/dts/apple/s8003-n71m.dts
new file mode 100644
index 000000000000..7ec6d2cda0bf
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-n71m.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s (TSMC), N71m, iPhone8,1 (A1633/A1688/A1691/A1700)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-6s.dtsi"
+
+/ {
+	compatible = "apple,n71m", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPhone 6s (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003.dtsi b/arch/arm64/boot/dts/apple/s8003.dtsi
new file mode 100644
index 000000000000..79df5c783260
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8003 "A9" (TSMC) SoC
+ *
+ * Other names: H8P, "Malta"
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+#include "s800-0-3.dtsi"
+
+/ {
+	twister_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <45000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <22000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <4>;
+			clock-latency-ns = <25000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-level = <5>;
+			clock-latency-ns = <28000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <6>;
+			clock-latency-ns = <35000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-level = <7>;
+			clock-latency-ns = <38000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <1844000000>;
+			opp-level = <8>;
+			clock-latency-ns = <38000>;
+			turbo-mode;
+		};
+#endif
+	};
+};
+
+/*
+ * The A9 was made by two separate fabs on two different process
+ * nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
+ */
diff --git a/arch/arm64/boot/dts/apple/s800x-6s.dtsi b/arch/arm64/boot/dts/apple/s800x-6s.dtsi
new file mode 100644
index 000000000000..1dcf80cc2920
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800x-6s.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s / 6S Plus common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s800-0-3-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 96 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 97 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 67 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 66 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl_ap 149 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/s800x-ipad5.dtsi b/arch/arm64/boot/dts/apple/s800x-ipad5.dtsi
new file mode 100644
index 000000000000..c1701e81f0c1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800x-ipad5.dtsi
author	Koba Ko <koba.ko@canonical.com>	2020-11-03 11:49:07 +0800
committer	Lyude Paul <lyude@redhat.com>	2020-11-10 12:41:01 -0500
commit	2dcab875e7637f1d3f9b978566e61ed1cbbba054 (patch)
tree	af205427f63c52b0917cef19629d1bdf42bc92fc /scripts/objdiff
parent	23d6ab1d4c503660632e7b18cbb571d62d9bf792 (diff)