diff options
| author | Farouk Bouabid <farouk.bouabid@theobroma-systems.com> | 2024-02-08 16:39:55 +0100 |
|---|---|---|
| committer | Heiko Stuebner <heiko@sntech.de> | 2024-02-13 20:05:47 +0100 |
| commit | 54448f711aa32f176534bbd7b1903cc6d1c8a50d (patch) | |
| tree | b856454da01cde1bb92ff3e32d92417607e49449 /tools/perf/scripts/python/export-to-sqlite.py | |
| parent | 4b325c0d4f539b553a4529f16476f08757779293 (diff) | |
arm64: dts: rockchip: add rs485 support on uart2 of rk3399-puma-haikou
A hardware switch can set the rs485 transceiver into half or full duplex
mode.
Switching to the half-duplex mode requires the user to enable em485 on
uart5 using ioctl, DE/RE are both connected to GPIO2_C3 which is the
RTS signal for uart0. Implement GPIO2_C3 as rts-gpios with RTS_ON_SEND
option enabled (default) so that driver mode gets enabled while sending
(RTS high) and receiver mode gets enabled while not sending (RTS low).
In full-duplex mode (em485 is disabled), DE is connected to GPIO2_C3 and
RE is grounded (enabled). Since GPIO2_C3 is implemented as rts-gpios, the
driver mode gets enabled whenever we want to send something and RE is not
affected (always enabled) in this case by the state of RTS.
Signed-off-by: Farouk Bouabid <farouk.bouabid@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240208-dev-rx-enable-v6-1-39e68e17a339@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Diffstat (limited to 'tools/perf/scripts/python/export-to-sqlite.py')
0 files changed, 0 insertions, 0 deletions