Bluetooth: ISO: Fix not using SID from adv report

Up until now it has been assumed that the application would be able to
enter the advertising SID in sockaddr_iso_bc.bc_sid, but userspace has
no access to SID since the likes of MGMT_EV_DEVICE_FOUND cannot carry
it, so it was left unset (0x00) which means it would be unable to
synchronize if the broadcast source is using a different SID e.g. 0x04:

> HCI Event: LE Meta Event (0x3e) plen 57
      LE Extended Advertising Report (0x0d)
        Num reports: 1
        Entry 0
          Event type: 0x0000
            Props: 0x0000
            Data status: Complete
          Address type: Random (0x01)
          Address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
          Primary PHY: LE 1M
          Secondary PHY: LE 2M
          SID: 0x04
          TX power: 127 dBm
          RSSI: -55 dBm (0xc9)
          Periodic advertising interval: 180.00 msec (0x0090)
          Direct address type: Public (0x00)
          Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
          Data length: 0x1f
        06 16 52 18 5b 0b e1 05 16 56 18 04 00 11 30 4c  ..R.[....V....0L
        75 69 7a 27 73 20 53 32 33 20 55 6c 74 72 61     uiz's S23 Ultra
        Service Data: Broadcast Audio Announcement (0x1852)
        Broadcast ID: 14748507 (0xe10b5b)
        Service Data: Public Broadcast Announcement (0x1856)
          Data[2]: 0400
        Unknown EIR field 0x30[16]: 4c75697a27732053323320556c747261
< HCI Command: LE Periodic Advertising Create Sync (0x08|0x0044) plen 14
        Options: 0x0000
        Use advertising SID, Advertiser Address Type and address
        Reporting initially enabled
        SID: 0x00 (<- Invalid)
        Adv address type: Random (0x01)
        Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
        Skip: 0x0000
        Sync timeout: 20000 msec (0x07d0)
        Sync CTE type: 0x0000

So instead this changes now allow application to set HCI_SID_INVALID
which will make hci_le_pa_create_sync to wait for a report, update the
conn->sid using the report SID and only then issue PA create sync
command:

< HCI Command: LE Periodic Advertising Create Sync
        Options: 0x0000
        Use advertising SID, Advertiser Address Type and address
        Reporting initially enabled
        SID: 0x04
        Adv address type: Random (0x01)
        Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
        Skip: 0x0000
        Sync timeout: 20000 msec (0x07d0)
        Sync CTE type: 0x0000
> HCI Event: LE Meta Event (0x3e) plen 16
      LE Periodic Advertising Sync Established (0x0e)
        Status: Success (0x00)
        Sync handle: 64
        Advertising SID: 0x04
        Advertiser address type: Random (0x01)
        Advertiser address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
        Advertiser PHY: LE 2M (0x02)
        Periodic advertising interval: 180.00 msec (0x0090)
        Advertiser clock accuracy: 0x05

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

0 files changed, 0 insertions, 0 deletions